Scanned GC28 2037 7_Time_Sharing_System_System_Messages_Sep71 7 Time Sharing System Messages Sep71
GC28-2037-7_Time_Sharing_System_System_Messages_Sep71 GC28-2037-7_Time_Sharing_System_System_Messages_Sep71
User Manual: GC28-2037-7_Time_Sharing_System_System_Messages_Sep71
Open the PDF directly: View PDF 
.
Page Count: 637
| Download | |
| Open PDF In Browser | View PDF |
File No. S360-20
GC28-2037-7
Systems Reference Library
VersiDn 8.1
IBM System/3SD Time Sharing System
System Messages
Lists and explains the messages issued by IBMsupplied components of the IBM System/360 Time
Sharing System. Contains additional information with
each message, such as the identification code of the
modules issuing and determining the need for the
message, the tz-ansmittal technique, and, where
appropriate, the format of the associated dump or the
completion code.
Includes SYSER and ABEND messages,
SYSMLF and general messages, messages issued by the
Time Sharing Support System (TSSS>, and messages issued
by language processors. Does not include messages
generated by the PL/I compilerTsee PL/I programmer's
Guide, GC28-2049, for these messages).
The IBM System/360 Time Sharing System provides for
a dialogue between the user and the system. The system
participates ill this dialogue with a series of
messages, which provide the recipient with the
information he requires to fulfill his task. These
messages may be received at a remote terminal in the
conversational mode, in the data set created as part of
the output of a nonconversational task, or at the
operator's terminal in the machine room.
TSS
This pub1.ication lists the messages
issued by all IBM-supplied comfonents of
the IBr~ ~>yst.err/360 Time Sharing System
(TSS/360l.
The reason each message is
issued, as well as the identifier of the
modules that determined the need for and
issued it and the transmittal t.echnique
used, accompanies each message. Also,
where appropriate, the expected response
and the s:,steJr, action arfe, given.
Part I presents an overall view of the
In addition to
describing t.he class of messages that are
issued, it specifies the means by which a
particular message can be located.
TSS/360 messaqe sys·tem.
Part II is devoted to the messages
emanating from the System Error Processor
to the operator.
After a brief
introductory section, which explains the
need tor these messages ana tne means b)-'
which they are issued, the messages a:ce
arranged in ascending order ty ·their
numeric coroponent.s.
Part III contains messages that are
issued upon the abnormal termination of a
task.
A brief introductory section, which
describes the Jceaning of comrletion codes
and the method of issuance, is followed by
the messages arranged in alphabetic order.
Part TV contains the general messages
issued by the system, that is, all messages
not contained in Parts II, III, or V of
this publication.
Included are the
messages emanating from the language
processcrs, the command system, and the
su~ervisor.
The first section is a general
i ntroduct.ion to thes e messages and an
explanation of how each message can be
located; this is followed by the messages
and the reference information associated
"ith therr.
Pax·t V contains Time Sharing Support.
system messages. TSSS is an online program
error analysis facility used for debugging
system program".
This putJlication, a consolidation of the
rressages appearing in other '1'58/360
publications, is designed to be used
independently of the other publications.
However, should the information contained
herein be inadequate for certain purposes,
the reference data following each Ifessage
nay be used as a starting point for further
investigation.
This edition replaces and makes obsolete GC2B-203J-6 and
Newsl~t~cr G~28-J137, and incoroorntes aJdi~j.0ns,
~ec~nical
changes, and deletions to the entire manual..
A number of new
System 1:.rror
have been inCluded, and therE are
system rressages.
numercus new
This editicn i.::~ cu.r:reirt with VEr3ion 8, Modification 1 of
the IBM System/360 'rime- Sharing Syst.em (15S/360) I and remains
in effect fo.L' all silt-sequent, VErsions or modificat.ions of
'1S8/360 unless otherwise Jlct.ed.
Significant chant]es Cir
addit.ions to this [ubLicatio-n will be provided in nEw.;
ediLl.l. )n:::i or Tecbnical t\ew:;;letteTs~
Before u~ing t~hi[;
.FubLicati on... rEfcI to the latest edition of JJ'?l". ~~~E;n'/360
l~ime ShariBg"__ ..§y~!-eroL__ ~dd_end~!!:.f GC28- 2043 t which may contain
info:rma"t_icn pertinent. to Lhe topics covered in thitJ edition ..
rlhe i~ddendum al~~o lists the editions of all 'rS.s/]60
f'UhlicdLions tha t are af~rli catlf: and curre_nt ~
trhis publicat_ion -wd~; FTepar(.:d for production u::;iny dn IHM
cOIPputer T_G upiatp. the. -text~ and to control thf--' page_ and linf:'
faunat-_.
Page impression!'; tor r;;hctu-offset- printing WEr!-~
obtained froIT, an IBM 140.1 _Print_eI using a spec:ial l=rint
chdin~
Hf-:ques-ts tor copies c-f IBN rublications stlculd Le nade tc
jour IB1,1 repres~nt.ativE or t ( j t:h(O IBM branch office servinq
your localit,y ~
A forn: .is rrovide6 cit. the tack of this rublication for
reader 'I s conur,(':mt~;.
1£ tJH~ for.w haG been removed, corr.I[lE;o-ts
lr.ay be addressed t_o IBt~ CCI"20rat,ion, Time Sharing SysterrJ360
f-rogramming publicat.ion!';, Derar-tment 643, Neighborhood Road,
i messages. TSSS messages are preceded by a module identification, almost always of
the form CcHccxxy. Part V defines the variables
c, x, and y, and describes the various types of
TSSS messages.
CLASSES OF MESSAGES
The IBM System/360 Time Sharing System (TSS/
360) provides four broad classes of messages.
Part I:
Introduction
1
PART II:
SYSTEM ERROR PROCESSOR
SECTION 1:
~.ESSAGES
SYSTEM ERROR PROCESSOR
The messages produced by the system Error Processor, and sent to the system operator, may refer
to both system software and hardware errors. The
System Error Processor module, CEAIS, which issues
the messages, is part of the Resident Supervisor.
It may be called by Supervisor programs, which
operate in real core, or by privileged service
routines. which operate in the problem state in
virtua 1 storage. 'The System Error Processor is
designed to deal with three classes of errors:
• Major software errors, which can be detected
by programming logic or by a program interrupt, are those whose impact upon the system
is either known to be extensive or cannot be
predicted. For this reason, the occurrence of
a real core error makes the integrity of the
entire system suspect. Since it would be
inadvisable to continue the operation of TSS/
360 after such a condition has occurred, the
detection of a real core error results in the
termination of all tasks being processed and
requires a system restart. The occurrence of
a virtual storage error queues a program
interruption on the affected task and exits in
the same manner as a virtual storage minor
error. This will cause the affected task to
be abnormally terminated while the remainder
of the system continues normal operation.
• Minor software errors, which can also be
detected by programming logic or ty a program
interruption, are those whose effect is confined to the task being executed at the time
they are detected. The System Error Processor
is invoked by the system routine that detected
an error in the task. After return from the
Systen, .Error Processor, the system routine
determines how the task should continue, in
one of four ways:
1.
The task may continue as if no error had
been detected.
2.
The task may continue after a flag or
poin-t.er has been set in a table.
storage that mayor may not have been detected
by the machine. AnalysiS is made by the system to identify the malfunctioning hardware
component and the action to be taken. If
possible the defective component will be partitioned out of the system and system operation will be restarted.
The message produced by the Systew Error Processor will comply with the following format:
ER type error number severity
userid taskid mode sdalbsn hh:mm
The variables in the preceding message are
described in Table 1. The operator can take a
dump. use the RUN command, or restart the system.
If the operatoruses the RUN command, then the
actions described in Table 2, Error Type Codes,
will take place.
CALLS FROM SUPERVISOR ROUTINES
When an
Supervisor
Processor,
and issues
ER RC
taskid
error is detected in real core by a
routine, it invokes the System Error
which formats the following message,
it at the operator's terminal:
nnnn
mode
severity userid
sdalbsn hh:mll'
The variables (shown in lower case letters) in
a real core ERROR Macro message provide specific
information about the error at hand. A descri~
tion of each of the variables can be found in
Table 1. The message reference in this manual is
re~resented by the variable "nnnn".
The variable
"severity" indicates the error type code. The
rressage at the operator's terminal would read for
an error type code of 1,
ER
RC
1300
MIN ESKRT 020 052 10:25
for an error type code of 2,
3.
The task may continue after an error code
has been placed in a return register.
1\.
The task may be abnormally terminated by
invoking the ABEND procedure, which is
described in Part. III, Section 1.
RC 1400 MAJ ••.
and for an error type code of 3,
RC 1500 BAR •••
In any event, regardless of the manner in which
processing continues, a system restart is not
requlreo. after a minor error.
It should be noted,
however, that even though the processing of the
task may continue, the minor error may ultimately
result in the appearance of another error that
will callse the task's ter:rnination.
Dumps can be taken by normal means after the
System Error Processor has entered the wait state.
The user identification variable ·userid" has the
form cccccccc. The task identification variable
has the form xxxx, but is not necessarily the task
causing the real core problem.
Valid task information is deFendent on the SYSER itself. Task
action is represented in the SYSER by the variable
amode",
For a conversational task (C),
. .• USERI003 0014 C 0053
• Hardware fai lure errors I which are detected by
programming logic, are assumed to be the
result of a malfunction in the CPU or in main
and for a nonconversational task (N),
.,. SYSOPERO OOlC N 0267
2
Table
r
1.
System Error Processor Message
Variables
Table
------------T--------------------,- -------,
, Variable ,
Meaning
,
t------------+----------------------------~
I type
IRC for a real core ERROR
,
I
I Macro message; or VM for a
,
I
Ivirtual storage SYSER Macro ,
I
Imessage.
I
I
I
I
lerror numberlA four-digit number, nnnn,
I
I
lidentifying the error numterl
I
I for a real core ERROR Macro I
I
Imessage; or a nine-digit
I
I
I number, nnnnnnnnn, identify-,
,
I ing the error numrer for a I
I
Ivirtual storage SYSER Macro'
I
Imessage.
I
I
I
I
I sdalbsn
I
I
I
I
I
,
I
I
I
I
I
I
,2
,
I
IMAJ(major software)-I
I exits to the RecoI
I very Nucleus.
I
IVirtual StoragelMAJ(major software)-I
I
I queue a program
I
I interrupt of Code
I
I
I 202 on the affected I
I
Itask and exit to thel
I
I Queue Scanner.
I
I
'I
I
,
I
I
I
I
IA four-character hexadecimal I
Inurr.ber representing the taskl
lidentification contained in I
Ithe TSI.
I
I
I
I
I
I
IReal Core
I
Itaskid
I
I
Imode
I
I
I 2
I
I
I
I
I
I
I
\ 3
IReal Core or
IHAR(hardware failI
I
(Virtual Storage!ure)- exit to the
I
Il ____ I _______________ I ____________________
Recovery Nucleus.
JI
lOser identificaticn, three- I
Ito-eight alphameric charac- I
Iters, contained in the 'lSI. I
I
I
ICodel
Type
I
Action
I
~----+---------------+--------------------~
I 1
IReal Core or
IMIN(minor software)-\
I
IVirtual Storagelresume system opera-I
I
I
I tion from the point I
I
I
lof interrupt.
I
,
IMIN for Code 1; MAJ for Code I
12; or BAR for Code 3.
(See I
'Table 2.)
I
luserid
I
I
I
Error Type Codes
I
I
I
1severity
I
2.
r---~---------------T--------------------,
IC identifies a conversation-I
tal task; or N identifies a
I
I nonconversational task.
I
IThis information is in the
I
I 'lSI.
I
I
I
IA four-character hexadecimal I
Inumber representing for a
I
Iconversational task the
I
!SYSIN symbolic device
I
I address contained in t,he
,
I TSI, or for a nonconversa ,
Itional task, the ratch
I
I sequence number (bSN).
I
1I
'A four-character l1UlLber
,representing the hour and
I
I minute tht message wa s
,
IL____________ lissued.
____________________________ JI
I"hh: mm
,
I
~
The SYSIN for a conversational task is the
terminal/line address; for a nonconversational
task, the batch sequence number identifies the
number assigned by the BULKIO task.
The last
variable, hh: mIl', states the time cf day the SYSER
message is issued.
0053 08:15
Section 2 of this part is a glcssary of the
SysteIf, Error Processor messages. T'hese are
arranged in numerical sequence ty the four-digit
codes, of the form nnnn. The glossary also contains the cause and other related data for each
message.
CALLS FROM PRIVILEGED SERVICE ROUTINES
The System Error Processor may also be invoked
when an error condition is detectE,d in virtual
storage by a privileged service routine.
Such
~
~
calls are handled in a manner identical to calls
by a Supervisor routine in real core.
The format
of the messages that appear at the operator's terminal is:
ER VM cccecccc
{MMAJIN}
uuuuuuuu tttt
BAR
{~}
ssss hh:mm VP=nnnnnnnn nnnnnnnn
Fer Example:
VM nnnnnnnnn severity userid taskid mode sda
hh: If If,
The variables (shown in lower-case letters) in
a virtual steorage SYSER macro instruction message
pL'ovide specific information about the error at
hand.
A description of each of the variables can
te found in Tarle 1. The message reference in
this manual is represented by the variable
"nnnnnnnnn".
The variable "severity" indicates
the error type code. The message at the operator's terminal would read for an error type code
of 1,
ER VM 050502509 MIN
for an error type code of 2,
ER Vl
Requirement determined by:' CEAJQ
variable data supplied by:
CEAJQ
0301
Explanation: A system error occurs if CEAKT is
passed a GQE with a TSI pointer of zero.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAKT
Variable data supplied by: CEAKT
0302
Explanation: The user timer has a value less
than the length of the last time slice. The
error is caused by the dispatcher (CEAKD).
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAKT
Variable data supplied by:. CEAKT
0303
Explanation: The task to be time-slice-ended
was not locked when CEAKT was entered.
Reference Data (Also see Appendix B-01.>
Requirement determined by: CEAKT
Variable data supplied by: CEAKT
0306
Explanation: The segment containing the PSW
page is not available.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAKT
Variable data supplied by: CEAKT
0307
Explanation: The task is not: on the inactive
list.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAKT
Variable data supplied by: CEAKT
0308
0309
Explanation: The lock byte SYSPWL remained
locked too long. This lock prevents
changing of the count of page writes
pending.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAKT
variable data supplied by: CEAKT
0322
Explanation: TSI lock remained locked too
long.
Reference Data (Also see Appendix B-01.)
Re~lirement determined by:
CEAKT
Variable data supplied by: CEAKT
0324
Explanation: System table lock (SYSTSIAD)
remained locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAKT
Variable data supplied by: CEAKT
0326
Explanation: System table lock (SYSTSKLK)
remained locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAKT
Variable data supplied by: CEAKT
0328
Explanation: System Table Lock (SYSTSILK)
remained locked too long.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAKT
Variable data supplied by: CEAKT
0330
Explanation: Auxiliary storage Allocation
Table lock (ASALCK) remained locked too
long .•
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAKT
Variable data supplied by: CEAKT
0331
Explanation: CEAKT received an error return
from CEAMQ on a page Table page request.
Reference Data (Also see Appendix B-01.)
Part II:
system Error Processor Messages
7
Page of GC28-2031-7, Issued Sept.. 30,
Requirement determined by:
Variable data supplied by'
1912 by TNL GN28-3220
CEAKT
CEAKT
0401
Explanation: An interruption was received from
CIF, but the device is not in the TDE table.
Reference Data (Also see Appendix 8-01.)
Requirement determined by:
CEATCS
Variable data supplied by:
CF.ATCS
Requirement determined by:
Variable data supplied by:
CEATCS
CEATCS
0409
Explanation: The VM address for the TCT or
buffer page or slot cannot be converted to a
real storage address. This is a major
software error.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEATCS
Variable data supplied by:
CEATCS
0402
Explanation:
An interruption was received but
there is no outstanding I/O operation
pending for the line.
Heference Data (Also see Appendix B-01.)
Requirement determined by:
CEATCS
Variable data supplied by:
CEATCS
0410
Explanation: The active count in TCT or buffer
page is not zero.
Reference Data (Also see Appendix B-O L )
Requirement determined by: CEATCS
Variable data supplied by:
CEATCS
040.3
0411
;Explanation: No data is in t:he function code
in TIOCB in the initialization phase.
Reference Data (Also see Appendix B-01.)
Requirement determined by:
CEATCS
Variable data supplied by:
CEATCS
Explanation:
Release of path could not be
accomplished.
Reference Data (Also see Appendix B-OL 1
Requirement determined by: CEATCS
Variable data supplied by:
CEATCS
0404
0412
Explanation:
Initialization could not be
completed.
Reference Data (Also see Appendix B-01.'
Requirement determined by:
CEATCS
Variable data supplied by:
CEATCS
Explanation:
Device t.¥pe is not specified in
TCT entry.
Reference Data (Also see Appendix B-O 1. )
Requirement determined by:
CEATCS
Variable data supplied by:
CEATes
0413
Explanation:
An interruption was received from
ClP. however. the device is not connected to
a 2702 or a 2703.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEI'.TCS
Variable data supplied by:
CF.ATCS
0406
Explanation: An interruption was received from
CIP. however" the device connected is not.
1050. 2141. or TTY35.
Reference Data (Also see Appendix B-01.)
Requirement determined by: C}~ATCS
Variable data suppl led by:
CF.ATCS
Explanation:
No work specified in TCT on
pending Halt I/O interrupt.
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEATCS
variable data supplied by:
CEATCS
04111
Explanation:
Incorrect buffer slot count.
Reference Data (Also see Appendix B-01.)
Requirement determined by:
CEATCS
Variable data supplied by:
CEATCS
0417
01107
Explanation: Halt I/O could not be issued to a
line.
Heference Oat.a (Also see Appendix 8-01.)
--~quirement determined by:
CEATCS
Variable data supplied by:
CEATCS
0408
Explanation:
Start. I/O could not. be issued to
a line.
Reference Data (Also see Appendix B-01.)
Explanation:
A VM or buffer page is not in
main storage.
Reference Data (I\lso see Appendix B-Ol.)
Requirement. determined by:
CEATC
Variable data supplied by:
CEATC
Device Group Table lock (DEVLOCK)
remained locked too long.
Heference Data (Also see Appendix 8-01.)
R('quirement_ determi ned by:
CEATCS
Variable data supplied by:
CEATCS
!';~lanation:
Page of GC28-2031-1. Issued Sept.• 30. 1912 by TNL GN28-3220
01133
01121
Explanation:
The TSI lock remained locked too
long~
Reference Data (Also see Appendix B-01 .. )
Requirement determined by: CEATCS
Variable data supplied by: CEATCS
Explanation: CEATS3 attempted to release a TCT
slot, but the entry was marked as
unassigned. This is a minor software error.
Reference Data (Also see Appendix B-O t.)
Requirement determined by: CEATCS
variable data supplied by: CEATCS
0434
01122
Explanation: System table lock (SYSTSIAD)
remained locked too long.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEATC
Variable data supplied by:
CEATC
Explanation:
CEATS4 attempted to release a
buffer slot, but the page table entry was
marked as unassigned. This is a minor
software error.
Reference Data (Also see Appendix 8-01.>
Requirement determined by: CEATCS
Variable data supplied by: CEATCS
0435
0423
Explanation: A terminal device table lock
(TDELOCK) remained locked too long.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by:
CEATC
Variable data supplied by:
CEATC
Explanation: CEATS3 and CEATS4 attempted to
mark a page in the page table as available,
but the page table entry was already so
marked. This is a minor software error.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEATCS
Variable data supplied by: CEATCS
01125
Explanation:
Device Group Table lock is open
0431
-- DEVLOCK.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEATCS
Variable data supplied by: CEATCS
Explanation: The TDELOCK has been locked upon
initial connection.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEATC
Variable data supplied by: CEATC
01128
Explanation: CEATC attempted to release a
buffer, but the buffer byte count was zero.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEATC
Variable data supplied by:
CEATC
Explanation: No MCB has been provided for
error recording.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEATC
Variable data supplied by: CEATC
0429
Explanation: The MTSCB lock remained locked
too long.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEATC
Variable data supplied by:
CEATC
0450
Explanation: MTS LOCK set too long
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEATC
Variable data supplied by: CEATC
0430
01151
Explanation: S10 received an error return code
following a pathfinding operation.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEATC
Variable data supplied by:
CEATC
Explanation: An incorrect TCT pointer was
passed to CEATC.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEATC
Variable data supplied by: CEATC
0431
0491
Explanation: CEATSl and CEATS2 attempted to
update a page table entry, but the page
table entry was marked as being already
assigned. This is a minor software error.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by:
CEATCS
variable data supplied by:
CEATCS
Explanation:
Incomplete interruption
information received (zero status or zero
sense) •
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEATCS
Variable data supplied by: CEATCS
Part II:
system Error Processor Messages
9
Page of GC28-20]1-1. Issued Sept. 30. 1912 by TNL GN28-3220
Explanation: A synchronous internlption has
occurred. but the channel status word
contains all zeros in the channel command
word address field.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEATC
Variable data supplied by: CEATe
Explanation: An invalid return has been
received during a page-location operation.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEANB
Variable data supplied by: CEANB
0'512
1. Explanation:
Invalid call. Task does not yet
have one full segment table page.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEANF
Variable data supplied by: CEANF
0493
Explanation: Incorrect CCW string.
Reference Data (Also see Appendix B-01.>
Requirement determined by: CEATCS
Variable data supplied by: CEATCS
2. Explanation: System table lock (SYSTSKLK)
remained locked too long.
Reference Data {Also see Appendix B-Ol.}
Requirement determined by: CEALID
Variable data supplied by: CEALID
01199
Explanation: TASKID 0001 could not be found.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEATC
Variable data supplied by: CEATC
0'514
1. Explanation:
Inval~d ILC in XTSUPS.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEANF
Variable data supplied by: CEANF
0501
invalid address for a Core
Block Table entry has been encountered. or
the CBTE is on an invalid boundary.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEANB
Variable data supplied by: CEANB
Explanation~
An
2. Explanation: System table lock (SYSTSKLK)
remained locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEALID,CEANB
Variable data supplied by: CEALID,CEANB
0.,15
0506
Explanation: Reserve list. of pages table lock
remained locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEALID
Variable data supplied by: CEALID
Explanation: Error in conversion of CBTE
address to real core page address.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEANF
Variable data supplied by:
CEANF
0516
0508
1. Explanation:
Processing of a user core
allocat_ion request cannot proceed because
the bypass allocation flag is set for the
request. Bypass flag set in PCB.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEANB
Variable data supplied by: CEANB
Explanation! An invalid return has been
received from the Rescheduler while
attempting to move a task to the inactive
list.
Reference Data (Also see Appendix B-01.)
Rpquirement determined by: CEANF
Variable data supplied by: CEANF
0511
2. Explanation: Core block header lock remained
locked t_oo long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEALID
Variable data supplied by: CEALID
0510
Explanation: Quick cell lock remained locked
too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEALIA
Variable data supplied by: CEALIA
0511
10
Explanation: An invalid return has been
received from the Rescheduler while
attempting to move a task from the inactive
list.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEANF
Variable data supplied by: CEANF
0518
Explanation: The Quick cell lock remained
locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEALl
Variable data supplied by: CEALl
page of GC28-2031-1. Issued Sept. 30, 1912 by TNL GN28-3220
Requirement determined by:
variable data supplied by:
0520
Explanation: Reserve list of pages table lock
remained locked too long .•
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEALIA
Variable data supplied by: CEALIA
0522
Explanation: System Table lock (SYSTSKLK)
remained locked too long.
Reference Data (Also see Appendix B-01.>
Requirement determined by: CEAL 1
variable data supplied by: CEAL 1
0524
Explanation: The Core Block Table remained
locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEALl
Variable data supplied by: CEAL1
0528
Explanation: TSlLOCK remained set too long.
Reference Data (Also see Appendix 8-01.>
Requirement determined by: CEANF
Variable data suppl ied by:
CEANF
0529
Explanation: CBRLOCK remained set too long.
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEANF
Variable data supplied by: CEANF
0530
Explanation: Core block header lock remained
locked too long.
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEALIA
variable data supplied by:
CEALIA
0538
Explanation: System table lock (SYSTSIAD)
remained locked too long.
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEANB
Variable data supplied by: CEANB
0546
Explanation: TSILOCK remained locked too long.
Reference Data (Also see Appendix 8-01.>
Requirement determined by: CEANB
Variable data supplied by:
CEANB
CEANB
CEANB
0556
Explanation: Core block header lock (CHBLOCK)
remained locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEANB
variable data supplied by: CEANB
0510
Explanation: Input parameter -byte count- is
invalid.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAL 1
Variable data supplied by: CEALl
0571
Explanation: No pages are left in reserve
list.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAL 1
variable data supplied by: CEAL1
0572
Explanation: The Core Block Table address is
invalid.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAL1
Variable data supplied by: CEALl
0580
Explanation:
Input parameter -byte count- is
invalid.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEALl
Variable data supplied by: CEAL1
0581
Explanation:
Input parameter -release address·
is invalid.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEALl
Variable data supplied by: CEAL1
0582
Explanation: Attempt was made to release a
page that was not allocated by supervisor
core allocation.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAL1
Variable data supplied by: CEAL1
0583
0548
Explanation: SYSSHALK remained locked too
long.
Reference Data {Also see Appendix 8-01.>
Explanation: Attempt was made to release a
block that was not allocated by supervisor
core allocation.
Reference Data (Also see Appendix B-01.)
Part II:
System Error Processor Messages
11
Page of GC28-2031-1, Issued Sept. 30, 1912 by TNL GN28-3220
Requirement determined by:
Variable data supplied by:
CEAL 1
CEALl
0590
Explanation:
Attempt was made to release a
page that was not in memory.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CRALl
Variable data supplied by:
CRALl
0591
Explanation:
Attempt was made to release a
page that was not allocated by user core
allocation.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEALl
Variable data supplied by:
CEALl
0699
Explanation:
Page table availability flag for
a shared page is zero.
possible hardware
relocation failure.
The relocation
exception is not honored, and return is to
the queue scanner.
processing continues.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEANA
Variable data supplied by:
CEANA
0701
Explanation: System table lock (SYSTSKLK)
remained locked too long.
Reference Data (Also see Appendix B-Ol.>
ReqUirement determined by: CEAMC
Variable data supplied by: CEAMC
0801
0592
Explanation:
Invalid PCB entry given as
parameter.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CRALl
Variable data supplied by:
CEALl
Explanation:
Core Block Table lock (CBHLOCK)
remained lOCked too long.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by:
CEAMX
Variab1e data supplied by:
CEAMX
0803
0602
Explanation:
Illegal interrupt code.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEANA
variable data supplied by: CEANA
0605
Explanation: The XTSI page was marked as not
in core for the task.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEANA
Variable data supplied by:
CEANA
0606
Explanation: The shared page table number
ISPT) in the AST entry was not found in the
RSPI table.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEANA
Variable data supplied by:
CEANA
Explanation:
Core Block Table lock (CBHLOCK)
remained lOCked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by:
CEAMX
Variable data supplied by: CEAMX
0807
Explanation:
Core Block Table lock (CBHLOCK)
remained locked too long.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAMX
Variable data supplied by: CEAMX
0811
Explanation: CEAMX received an error return
from CEAMQ on a Page Table page request.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAMX
Variable data supplied by: CEAMX
0901
0607
Explanation:
System Table Lock (SYSTSRLK)
remained locked too long.
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEANA
Variable data supplied by: CEANA
0610
Exp1anation: CEANA received an error return
from CEAMQ on a Page Table page request.
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEANA
Variable data supplied by:
CEANA
12
Explanation:
An LRA instruction for the
virtual memory allocation of the TCT
indicates an invalid address.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by:
CEAR4
Variable data supplied by: CEAR4
0902
Explanation:
A TCT page was marked not in core
for the task.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by:
CEAR4
variable data supplied by:
CEAR4
Page of GC28-2037-7, Issu{,d sept.• 30, 1972 by TNL GN28-3220
0903
Explanation:
System Table lock (SYSTSIAD)
remained locked too long.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAR4
variable data supplied by:
CEAR4
0904
Explanation: The MTS lock (MTSLCK) remained
locked too long.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by ~ CEAR4
Variable data supplied by ~
CEAR4
0905
Explanation: An asynchronous device entry was
found for which no TOE entry exists.
Reference Data (Also see ~ppendix B-Ol.)
Requirement determined by: CEAR4
Variable data supplied by:
CEAR4
0906
Explanation:
No Device Group Table entry could
be found for an SDA.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAR4
Variable data supplied by:
CEAR4
1001
Explanation: The virtual memory address in the
PCB is invalid.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAMP
Variable data supplied by:
CEAMP
1002
Explanation:
The count of shared page writes
is zero.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAMP
Variable data supplied by:
CEAMP
1003
Explanation:
RSPI count is zero, but SPT
number is not zero.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by:
CEAMS
Variable data supplied by:
CEAMS
10011
Explanation:
The shared page table number is
not in the RSPI table.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAMP
variable data supplied by:
CEAMP
1005
Explanation:
Invalid RSPI count, or RSPI is
not chained properly.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAMS
Variable data supplied by: CEAMS
1010
Explanation: TSI lock remained locked too
long.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAMP
Variable data supplied by: CEAMP
1020
Explanation: System table page sharing lock
(SYSSHALK) remained locked too long.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAMP
Variable data supplied by: CEAMP
1022
Explanation: The page write count in the
external shared page table entry (XSPT) is
already zero.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAMP
variable data supplied by: CEAMP
102f1
Explanation: An attempt was made to decrement
TSICP when it was already zero.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAMP
Variable data supplied by: CEAMP
1030
Explanation: System table task creation lock
(SYSTSKLK) remained locked too long.
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEAMP
Variable data supplied by: CEAMP
10flO
Explanation: TSIBLK is non-zero and block
paging scan has already been completed.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAMP
Variable data supplied by: CEAMP
1098
Explanation:
Core Block Table lock (CBHLOCK)
has remained locked too long.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAMP
Variable data supplied by: CEAMP
1099
Explanation: The page is an XTSI page, but it
is neither the first XTSI page nor a page
Part II:.
System Error Processor Messages
13
Page of GC28-2037-7, Issued Sept. 30, 1972 by TNL GN28-3220
table page.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAMP
Variable data supplied by: CEAMP
1217
Explanation: Core Block Table lock (CBHLOCK)
has remained locked too long.
Reference Data (Also see Appendix B-01.
Requirement determined by: CEAP4
Variable data supplied by: CEAP4
1218
Explanation: Error return given from locate
page subroutine. The page could not be
located.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAPO
Variable data supplied by:
CEAPO
1224
Explanation: CEAHQ received an error return
from CEAMQ for a Page Table page request.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAHQ
Variable data supplied by: CEAHQ
1225
Explanation: The task's XTSI page is not in
core.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAQ2
Variable data supplied by: CEAQ2
1226
Explanation: TSK lock remained locked too
long.
Reference Data (~lso see Appendix B-01.)
Requirement determined by: CEAHQ
Variable data supplied by: CEAHQ
1219
Explanation:
Invalid entry. The locate page
subroutine was unable to locate the page.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAPO
Variable data supplied by:
CEAPO
1221
Explanation:
Segment or page unavailable upon
return from LRA instruction.
Reference Data (Also see Appendix B-Ol.)
Requirement det.ermined by:
CEAH1
Variable data supplied by: CEAH1
1220
Explanation: Find page routine was returned.
indicating that the segment was unassigned.
This was the second attempt to find the
page. The first attempt produced the same
return. and a second try was made because
the page was the first in the segment.
Reference Data (Also see Appeniix 8-01.)
Requirement determined by: CEAHQ
Variable data supplied by:
CEAHQ
1221
Explanation: System Table lock (SYSTSIAD) has
remained locked too long.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAHQ
Variable data supplied by:
CEAHQ
1229
Explanation: The find page routine returned a
code indicating segment unassigned, after
receiving a successful return code from the
expand segment subroutine.
Reference Data (Also see Appendix B-Ol.l
Requirement determined by: CEAHQ
Variable dat.a supplied by:
CEAHQ
1230
Explanation: The TSI lock remained locked t.oo
long.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAP1
Variable data supplied by: CEAP1
1231
1222
Explanation:. The first. attempt to find a page
with the find page subroutine returned with
t:he segment unavailable, and the page not
the first page of the segment.
Reference Dat.a OU50 see Appendix 13-01.)
Requirement determined by: CEAHQ
Variable data supplied by:
CEAHQ
1223
Explanation: The XTSI for the issuing task is
not in core.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAHQ
variable data supplied by: CEAHQ
14
Explanation: The TSI lock remained locked too
long.
Reference Data (Also see APPENDIX B-01.)
.
Requirement determined by: CEAHQ
Variable data supplied by:
CEAHQ
1232
Explanation: The half page being referenced
has no protection class set.
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEAQ4
Variable data supplied by: CEAQ4
1233
Page of GC28-2031-1. Issued Sept. 30. 1912 by TNL GN28-3220
Requirement determined by:
Variable data supplied by:
Explanation: The task was found in delay
state. Since it is about to be put into
delay state by this processor (AWAIT or
TWAIT), i t is an illogical condition.
Reference Data (Also see Appendix B-01,.)
Requirement determined by: CEAP1 or CEARO
Variable data supplied by:
CEAP1 or CEARO
1234
Explanation: Invalid virtual storage address
given as the location of the SVC
instruction. This was encountered in TWAIT
and AWAIT.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAP1 or CEARO
variable data supplied by:
CEAP1 or CEARO
1235
Explanation: The system table lock (SYSTSIAD)
remained locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAQ6
Variable data supplied by: CEAQ6
1238
Explanation: Shared page table number not
found in the aSPI.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAQ6
Variable data supplied by:
CEAQ6
1239
Explanation: The virtual memory page
conta1n1ng the message is not in core. The
Virtual memory address in question may be
found in general register 8.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAQ5
Variable data supplied by: CEAQ5
1241
Explanation: System Table lock (SYSSHALK) has
remained locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAQ6
Variable data supplied by:
CEAQ6
1242
Explanation: The shared page table number
expected in the auxiliary segment table was
not there.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAQ6
Variable data supplied by:
CEAQ6
Explanation: The lock protecting the changing
of the chain of GQEs chained onto an RSPI
entry has remained locked too long.
Reference Data (Also see Appendix B-01.)
CEAQ6
CEAQ6
Explanation: A GQE chained onto an RSPI entry
contained an interrupt code other than 11.
Refer to IBM system/360 Time Sharing system:
System Programmer's Guide, GC28-2008
appendixes for a listing of TSS/360 Extended
Program Interruption COdes.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAQ6
Variable data supplied by: CEAQ6
1245
Explanation: The task paging count lock
(TSILK2) has remained locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAQ6
Variable data supplied by: CEAQ6
1251
Explanation: The delete is for more pages than
are in the segment.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAND
Variable data supplied by: CEAND
1253
Explanation: The shared page table number
being looked for in the RSPI table was not
found.
Reference Data (Also see Appendix B-Ol.)
ReqUirement determined by: CEAND
Variable data supplied by: CEAND
1256
Explanation: Core Block Table lock (CBHLOCK)
has remained locked too long.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAND
Variable data supplied by: CEAND
1258
Explanation:
Either a hardware error. or
registers were not restored properly after
an interruption.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEANC
Variable data supplied by: CEANC
1262
Explanation: Tsr lock remained locked too
10ng.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAQ6
Variable data supplied by: CEAQ6
1264
Part II:
system Error Processor Messages
15
Page of GC28-203?-1, Issued sept. 30, 1912 by TNL GN28-3220
Explanation: TSI lock remained locked too
long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAQ6
Variable data supplied by:
CEAQ6
1266
Explanation: Shared page table (SPT) number
not found in RSPI table.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEANC
Variable data supplied by: CEANC
1261
Explanation: system Table lock (SYSSHALK) has
been locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by:
CEANC
Variable data supplied by: CEANC
1269
Explanation: System Table lock (SYSSHALK) has
remained locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAK1
Variable data supplied by: CEAK7
1270
Explanation: Elapsed time is negative or has
exceeded 2 63 -1 microseconds.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAS6
Variable data supplied by:
CEAS6
1271
Explanation: System table time lock (SYSTIMLIO
remained locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAS2
Variable data supplied by:
CEA.S2
Requirement determined by:
Variable data supplied by:
CEAMD
CEAMD
1280
Explanation: System table time lock (SYSTSKLK)
remained locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAMD
Variable data supplied by: CEAMD
1281
Explanation: The Device Group Table lock
(DEVLOCK) has remained locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAMD
Variable data supplied by: CEAMD
1288
Explanation: System table lock (SYSTSKLK)
remained locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAH7
Variable data supplied by: CEAH7
1281
Explanation: Core Block Table lock (CBHLOCK)
has remained locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAH7
Variable data supplied by: CEAH7
1300
Explanation: An attempt to release auxiliary
storage cannot be processed because the
device address is invalid or the page
requested to be released is not currently
allocated. The device address being passed
to ASR is invalid or the page to be released
is already free.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAIA
Variable data supplied by: CEAIA
1273
Explanatio;"l: System table lock (SYSTSIAD)
remained locked too long.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAQ5
Variable data supplied by:
CEAQ5
1275
Explanation:
TSI lock remained locked too
long~
Reference Data (Also see Appe OOi x B-O 1. )
Requirement determined by: CEAQ6
Variable data supplied by: CEAQ5
1301
Explanation: An attempt to allocate auxiliary
storage cannot be processed because the
bypass allocation flag or suppress
allocation flag is set: for each page
requested. A request has been made for
auxiliary storage but the bypass flag is set
in the only PCBE or in all the PCBEs
attached to the GQE.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAIA
Variable data supplied by: CEAIA
1302
1278
Explanation: System table lock (SYSTIMLK)
remained locked too long .•
Reference Data (Also see Appendix B-01.)
16
Explanation:
Aux allocation has determined
that no auxiliary storage exists and that a
task cannot be killed to get back space.
Reference Data (Also see Appendix B-01.)
Page of GC28-2037-7, Issued Sept. 30. 1972 by TNL GN28-3220
Requirement determined by:
variable data supplied by:
CEAIA
CEAIA
1303
Explanation: Aux storage counts internal to
CEAIA are inaccurate and .lUX space cannot be
assigned.
Reference Data (A1so see Appendix 8-01.)
Requirement determined by~ CEAIA
Variable data supplied by:
CEAIA
1304
Explanation: Bad drum count in TSI.
Reference Data (Also see APPENDIX 8-01.)
Requirement determined by ~
CEAIA
variable data supplied by ~
CEAIA
1311
Explanation: system Table lock (SYSTSIAD) has
remained locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by:
CEAIA~~
variable data supplied by~
CEAIA#~
1312
Explanation: System table lock (SYSTSRLK)
remained locked too long.
Reference Data (Also see Ap~~ndix B-01.)
Requirement determined by: CEAIA
variable data supplied by,
CEAIA
1315
Explanation: ASA locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAIA
variable data supplied by: CEAIA
1411
Explanation: There has been a program
interrupt while in the supervisor state.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAJI
variable data supplied by: CEAJI
11+22
Explanation: There has been an illegal SVC
interrupt while in the supervisor state.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAJI
Variable data supplied by: CEAJI
1433
Explanation: There has been an external
interrupt. but none of the external
indicators are on.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAJ I
Variable data supplied by: CEAJI
1444
Explanation: Timer interruption occurred in
supervisor state with timer/program
indicator off, and system not in wait state.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAJI
Variable data supplied by: CEAJI
Explanation: The ISA page is not in main
storage.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAJI
Variable data supplied by: CEAJI
1466
1318
Explanation: ASA locked too long.
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEAIAR
Variable data supplied by: CEAIAR
Explanation: An SVC interruption occurred in
RSS state.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAJI
Variable data supplied by: CEAJI
1471
1323
~lanation:
Explanation: TSILOCK remained locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAIA
Variable data supplied by: CEAIA
1340
Explanation:
Invalid VM address received in
PCB. The VMA that was passed exceeded
either page or segment limits. This was
probably caused by a hardware malfunction.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAIA
Variable data supplied by:
CEAIA
The interrupt stacker passed a
hardware interrupt greater than 17 to the
Task Monitor.
Refer to IBM System/360 Time
Sharing System: System Programmer's Guide,
GC28-200B appendixes for a listing of
TSS/360 Extended Program Interrupt Codes.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAJ I
Variable data supplied by: CEAJI
1480
Explanation: System table time lock (SYSTIMLK)
remained locked too long.
Reference Data (Also see Appendix B-01.)
Part II:
system Error Processor Messages
11
Page of GC2B-2031-1 w Issued Sept. 30. 1972 by TNL GN28-3220
Requirement determined by:
Variable data supplied by:
CEAJI
CEAJI
1484
Explanation:
A virtual memory page READ was
expected. but a page table page READ was
initialized.
Reference Data (Also see Appendix B-01.)
Requirement determined by:
CEAMQ
Variable data supplied by:
CEAMQ
Explanation~
TSI lock remained locked too
long.
Reference Oata (Also see Appendix B-Ol.)
Requirement determined by: CEAJI
Variable data supplied by: CEAJI
1501
1154
Explanation:
A segment exists, but earlier
tests indicated that the segment was in main
storage.
Reference Data (Also see Appendix B-01.)
Requirement determined by:
CEAMQ
Variable data supplied by:
CEAMQ
~lanation:
The CPU that is to receive the
external signal cannot be idencified. and
the request is' rejected.
Control is
returned to the calling program by t.he
inter-CPU communication routine, and
processing continues.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAIC
Variable data supplied by:
CEAIC
1755
Explanation: An LRA indicated that a page was
out of core, when the Page Table indicates
that the page is in core.
Reference Data (Aiso see Appendix B~01.)
Requirement determined by:
CEAMQ
Variable data supplied by: CEAMQ
1702
1756
Explanation: System Table lock (SYSTSRLK)
locked too long.
Reference Data (Also see Appelrlix B-Ol.l
Requirement determined by: CEAMQ
Variable data supplied by:
CEAMQ
n06
Explanation: The auxiliary segment table
points to a segment table that is not first
in the page table page.
This is a major
software error.
Reference Data (Also see Appe~dix B-01.)
Requirement determined by:
CEAMQ
Variable data supplied by: CEAMQ
~lanation:
The TSI lock has remained locked
too long.
Reference Data (Also see Apperdix B-Ol.l
Requirement determined by: CEAMQ
Variable data supplied by:
CEAMQ
1750
1758
Explanation:
A READ was initialized for a
virtual memory page on a type Beall.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAMQ
Variable data supplied by:
CEAMQ
~lanation:
On a type A call, d page was
available before CEAMQ tried to page it in.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAMQ
Variable data supplied by: CEAMQ
1751
Explanation:
A page table page READ was
expected. but a virtual memory page READ was
initialized.
Reference Data (ALso see Appendix 8-01.)
Requ irement determined by: CEAMQ
Variable data supplied by:
CEAMQ
1752
Explanation:
CEAMQ expected a page table page
READ to be initialized. but found that t.he
page address was invalid.
Reference Data (Also see Apperdix 8-01.)
Requirement determined by: CEAMQ
Variable data supplied by: CEAMQ
18
1759
Explanation: A bad page address was found on a
type B call; only the page table page should
have been checked.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAMQ
Variable data supplied by:
CEAMQ
1160
Explanation:
A virtual memory page READ was
initialized, but it should not have been
initialized.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by:
CEAMQ
Variable data supplied by:
CEAMQ
1162
Explanation:
A return from LOCATE PAGE
indicated that the segment was unaSSigned,
but previous tests indicated that the page
was available.
Reference Data (Also see Appendix B-Ol.)
Page of GC2S-2037-1, Issued Sept. 30, 1972 by TNL GN28-3220
Requirement determined by:
Variable data supplied by:
CEAMQ
CEAMQ
1763
Explanation: A return from LOCATE PAGE
indicated that the page was unassigned, but
previous tests indicated that the page was
available.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAMQ
Variable data supplied by: CEAMQ
1903
1. Explanation: Locate page locked too long .•
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAT2
variable data supplied by: CEAT2
2. Explanation:
System table page sharing lock
has remained locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAML
Variable data supplied by: CEAML
(SYSSHALK)
1764
Explanation: A return from LOCATE PAGE
indicated that the page table was out of
main storage, but previous tests indicated
that the page was available.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAMQ
Variable data supplied by: CEAMQ
Explanation: The XTSI is not in core.
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEAMD
Variable data supplied by:
CEAMD
1907
1768
Explanation: The page table indicated that the
virtual memory page was out of main storage,
but previous tests indicated that it was in
main storage.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAMQ
Variable data supplied by: CEAMQ
1771
Explanation: A paging error has occurred
during a shared-page paging error recovery
operation. This is a major software error.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAMQ
variable data supplied by:
CEAMQ
1172
Explanation: CEAMQ attempted to add a second
PCB to the GQE, but found that no first PCB
existed.
Reference Data (Also see Appendix B-01 .• >
Requirement determined by: CEAMQ
Variable data supplied by: CEAMQ
Explanation: CEAMD received an error return
from CEAMQ on a Page Table page request.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAMD
Variable data supplied by: CEAMD
2001
Explanation: The direct-access paging
statistical data record (DAPSDR) entry for
the failing paging I/O device cannot be
found.
This is a major software error.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAI6
Variable data supplied by: CEAI6
2010
Explanation: A code indicating an error in its
input parameters was returned by the
inter-CPU communication routine. This is a
major software error.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAI7
Variable data supplied by: CEAI7
2011
1901
Explanation:
The XTSI is not in core.
Reference Data (Also see Appendix B-01.>
Requirement determined by: CEAML
Variable data supplied by:
CEA?IT.
Explanation: The system environment recording
and retry (SERR) operating area cannot be
determined since the prefix of the active
CPU cannot be identified. This is a major
software error.
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEAI7
Variable data supplied by: CEAI7
1902
Explanation: Shared page table (SPT) number is
not in the RSPI table, or the system table
page sharing lock (SYSSHALK) remained locked
too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAML
Variable data supplied by:
CEAML
2013
Explanation: Pointer to the SERR operating
area (PSASOA) is zero.
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEAI7
variable data supplied by: CEAI7
Part II:
System Error Processor Messages
19
Page of GC28-2031-1, Issued sept. 30, 1912 by TNL GN28-3220
5104
Explanation: Core Block Table lock (CBHLOCK)
has remained locked too long.
Reference Data (/Usa see Appendix B-Ol.)
Requirement determined by:
CEAMD
Variable data supplied by:
CEAMD
5360
Explanation:
Device group table lock remained
locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAAS
Variable data supplied by: CEAAS
5f.101
5108
Explanation: CEAAO received an error return
from locate page (CEAML).
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAAO
Variable data supplied by: CEAAO
Explanation:
Start address greater than end
address of device queue entries in the scan
table.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAA4
Variable data supplied by: CEAA4
5402
5201
Explanation:
A multiplexor subchannel was
found operating in burst mode.
Processing
continues.
Reference Data (/Uso see Appendix 8-01.)
Requirement determined by:
CEAA3
Variable data supplied by:
CEAA3
Explanation:
An unsolicited interrupt occurred
which can not be processed.
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEAA4
Variable data supplied by: CEAAf.I
5403
5202
Explanation: The TST write access lock byte
was on too long (about one millisecond), or
the TSI lock remained locked too long.
geference Data {/Uso see Appendix B-Ol.}
Requirement determined by: CEAA3
Variable data supplied by:
CEAA3
5203
Explanation: The system table F2 pending count
lock
Requirement determined by: CEAA5
Variable data supplied by:
CEAA5
Explanation: Scan table entry remained locked
too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAA4
Variable data supplied by: CEAA4
5408
5350
Explanation: channel table lock remained
locked too long.
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEAAS
variable data supplied by: CEAA5
20
Explanation: Reverse pathfinding could not
free control unit and device specified by
actual path in the interrupt GQE.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAA4
variable data supplied by: CEAA4
Page of GC28-2037-7. Issued Sept. 30, 1972 by TNL GN28-3220
5409
Explanation: Reverse pathfinding could not
free control unit specified by the actual
path in the interupt GQE.
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEAA4
Variable data supplied by:
CEAA4
5502
Explanation: Interrupt sequence number is
missing in DIB chain (occurrence of an
i.llogical sequence).
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAA9
Variable data supplied by: CEAA9
5504
5411
Explanation: TSI lock remained locked too
long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAA4
Variable data supplied by:
CEAA4
Explanation: The system page write pending
count is zero before decrement .•
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAA9
Variable data supplied by: CEAA9
5505
5412
Explanation:
A virtual page specified as part
of the user's I/O buffer could not be
located by the locate page routine.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAA4
Variable data supplied by:
CEAA4
Explanation: The location on queue value
cannot be found in the paging drum directory
(occurrence of an illogical sequence).
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAA9
Variable data supplied by: CEAA9
5514
5413
Explanation:
page hold counter for virtual
memory page is zero when i t should not be.
Reference Data (Also see APPE!lldix B-O 1. )
Requirement determined by: CEAA4
Variable data supplied by:
CEAA4
Explanation: System Table lock (SYSPDDLK) has
remained locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAA9
Variable data supplied by: CEAA9
5520
5417
Explanation: Device group table lock remained
locked too long.
Reference Data (Also see Appe!udix 8-01.)
Requirement determined by:
CEAA4
variable data supplied by:
CEAA4
Explanation: System table lock (SYSTSKLK)
remained locked too long.
Reference Data (Also see Appendix B-O 1 .• )
Requirement determined by: CEAA9
Variable data supplied by: CEAA9
5530
5418
Explanation: The Device Group Table lock
(DEVLOCK) has remained locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by ~ CEAA4
variable data supplied by:
CEAA4
Explanation: TSI lock remained locked too
long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAA9
Variable data supplied by: CEAA9
5601
5422
Explanation: The Scan Table Entry F3 lock
(SCNF3LCK) has remained locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAA4
Variable data supplied by:
CEAA4
5501
Explanation: Cause of paging interrupt is busy
and/or status modifier (occurrence of an
illogical sequence).
Reference Data (Also see Appendix B-01.)
Requirement determined by~
CEAA9
variable data supplied by,
CEAA9
Explanation: A page GQE has a PC BE count that
equals zero or excefds the maximum number of
possible DIB entries.
(The DIB is limited
to one page in size.)
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAA8
variable data supplied by: CEAA8
5602
Explanation: A symbolic page number cannot be
translated into a valid location on the
paging drum.
Reference Data (Also see Appendix B-01.>
Requirement determined by: CEAA8
variable data supplied by: CEAA8
Part II:
system Error Processor Messages
21
Page of GC28-2031-1. Issued Sept. 30, 1972 by TNL GN28-3220
5603
Explanation: The channel program has
overflowed the total oIB sface available to
contain the channel program.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAA 8
Variable data supplied by:
CEAA8
5701
Explanation:
A paging GQE has a PCBE count of
zero or the size of the PCB exceeds the
maximum number of possible OAIB entries.
(The DAIB is limited to one page in size.)
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAA6
Variable data supplied by: CEAA6
5604
Explanation: The location on queue value
specified in the GQE cannot be found in the
paging drum directory (occurrence of an
illogical sequence).
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAA8
Variable data supplied by:
CEAA8
5605
Explanation: A drum access method paging
request has a page list length of zero.
Reference Data (Also see Appendix a-Ol.>
Requirement determined by: CEAA8
Variable data supplied by: CEAA8
5606
Explanation: The TSI write access lock byte
was on too long Cabout one millisecond).
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAA8
Variable data supplied by: CEAA8
5702
Explanation:
An incorrect pointer to a seek
argument was found while setting up a write
check operation. A check after subtract
register found difference is not greater
than zero.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAA6
Variable data supplied by: CEAA6
5703
Explanation: The PCB entry count went to zero
before all DAIB paging operations were
processed. A check before a BCT instruction
found the register to be zero.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAA6
Variable data supplied by: CEAA6
5704
1. Explanation:
5607
Explanation: The paging drum queue count is
zero before decrement.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAA8
Variable data supplied by:
CEAA8
5608
Explanation: An invalid drum external address
(cylinder greater than 199) has been
encountered.
Reference Data (Also see Appendix B-01,.)
Requirement determined by: CEAA8
Variable data supplied by: CEAAS
5620
Explanation: system Table lock
Requirement determined by: CEAA2
Variable data supplied by: CEAA2
5705
Explanation:
Due to interference from the 2314
in-line diagnostics, the wSIO-BUSy" retry
threshold has been reached. or the control
unit has been busy too long. To each
condition. turn off in-line diagnostics.
Reference Data (Also see Appendix B-Ol.>
Requirement determined by: CEAA6
Variable data supplied by: CEAA6
57QO
Explanation: TSI lock remained locked too
long.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAA7
Variable data supplied by: CEAA7
5750
Page of
GC28~2037-7,
Explanation:
System Table lock (S'lSTSKLK)
remained locked too long.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by:
CEAA7
Variable data supplied by:
CEAA7
Issued Sept. 30, 1972 by TNL GN28-3220
Requirement determined by:
Variable data supplied by:
CEAAl
CEAAl
5902
5752
Explanation: The cause of a paging interrupt
is undefined (occurrence of an illogical
sequence).
Reference Data (Also see Appendix B-Ol.)
Requirement determined by:
CEAA1
variable data supplied by:
CEAA7
5153
Explanation: System page writce pending count
found to be zero before decrement, or the
system table task creation lock (SYSTSKLK)
remained locked too long.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAA1
Variable data supplied by:
CEAA1
5754
Explanation:
Reverse pathfinding could not
free the path that was us~l on a paging
operation.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by:
CEAA1
Variable data supplied by:
CEAA7
5755
Explanation: An invalid VMA was detected in a
VAM paging operation, or the page hold count
was zero before decrement.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAA7
Variable data supplied by:
CEAA7
5801
Explanation: The TSI paging count lock byte
TSILK2 has been locked after 4096
consecutive tries. Processing continues.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by:
CEAAl
Variable data supplied by:
CEAA1
5802
Explanation: The system table page write
pending lock byte (SYSPWL) has remained
locked after 4096 consecutive tries, or the
system table task creation lock (SYSTSKLK)
has remained locked too long.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAA 1
Variable data supplied by:
CEAAl
5810
Explanation: CEAAl received an error return
from lo~ate page.
Reference Data (Also see Appendix B-Ol.)
Explanation: CEAA2 attempted to free an ISA
which was already unassigned.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAA2
Variable data supplied by: CEAA2
5903
Explanation: The TSI lock remained locked too
long.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAA2
Variable data supplied by: CEAA2
5904
Explanation: No GQE exists for a pending
interruption.
Reference Data (Also see Appendix B-Ol.)
Requirement: determined by: CEAA2
Variable data supplied by: CEAAF
6001
Explanation: The Baltio Log lock (LOGLOCK)
remained locked too long.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAAI
Variable data supplied by: CEAAI
6101
Explanation: The input request code was
invalid. Valid codes are AR. AS, SR, SS,
AL. AD, SL, and SD. An error exit is made
to the calling program or queue scanner.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAAL
Variable data supplied by: CEAAL
6102
Explanation: An invalid type code or task ID.
Valid type codes are AT and ST. Only the
operator task (ID=l) can purge tasks other
than itself. An error exit is made to the
calling program or the queue scanner.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAAL or CEAAV
Variable data supplied by: CEAAL or CEAAV
6105
Explanation: The requested task: was not found .•
An error exit is made immediately to the
ca11ing program or the queue scanner.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAAL
Variable data supp1ied by: CEAAL
6110
Part II:
system Error Processor Messages
23
Page of GC28-2037-7. Issued Sept. 30,
1972 by TNL
GN28~3220
~landtion:
system table TSI chain lock
(SYSTSILK) has remained locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAAL
Variabl.e data supplied by:
CEAAL
6120
Explanation:_ TSI lock has remained locked too
long.
Reference Data (Also see Appendix B-O 1.)
Requirement. determined by: CEAAL
Variable data supplied by:
CEAAL
6130
Explanation:
DIG entry lock (SMEDLB) has
remained locked too long.
Reference Data (Also see Appendix B-01.)
Requirement det.ermined by: CEAAL
Variable data supplied by:
CEAAL
Requirement determined by:
Variable data supplied by:
CEAAF
CEAAF
6304
Explanation:
A request was made to queue a GQE
with an interrupt code of 0 (Program),
priority 3. when one already exists for the
task. This is a minor software error;
processing continues.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAAF
Variable data supplied by: CEAAF
6306
Explanation: An error return from the
rescheduling subroutine was received.
is a major software error.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAAF
Variable data supplied by: CEAAF
This
6131
630fl
Explanation: The Scan Table Entry F3 lock
Requirement determined by:
CEAAJ
Variable data supplied by:
CEAAJ
6410
Explanation: CEAAI was invoked for a device
other than a 2702 terminal device.
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEAAJ
Variable data supplied by:
CEAAJ
Explanation: A multiplexor subchannel has been
asked to operate in burst mode or the start
I/O log lock has ~emained locked too long.
Reference Data (Also see Appendix B-01.)
ReqUirement determined by: CEAAG
Variable data supplied by: CEAAG
6502
Explanat.ion: The lock on the Start I/O log
remained locked too long.
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEAAG
Variable data supplied by: CEAAG
6504
Explanation:
Both Start I/O save areas are in
use.
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEAAG
Variable data supplied by: CEAAG
6505
Explanation: Device group table lock has
remained locked too long.
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEAAJ
Variable data supplied by:
CEAAJ
Explanat.ion: A TIO instruction caused an
invalid condition code.
Reference Data (Also see Appendix 8-01.)
Requi rement. determined by: CEAAG
Variable data supplied by: CEAAG
6507
Explanation: A Start I/O has been issued for a
device which was not operational.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAAJ
Variable dat4 supplied by:
C~J
6415
Explanation: A SCdn Master Entry for a device
interaction group has remained locked too
long.
Reference Data (Also see Appendix B-01.)
Requirement determined by' CEAAJ
Variable data supplied by:
CEAAJ
6416
Explanation: system Table lock (SYS89LK) has
remained locked too long.
Explanation: A test channel instruction caused
an invalid condition code.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAAG
Variable data supplied by: CEAAG
6601
Explanation:
Upon successive entries to CEAAM,
one (and only one) of the following paging
error control block (PECB) flags must be on
(indicdting the recovery procedure to be
followed):
PECSR, PECSA, or PECAR.
If no
flag is on, a major software system error is
reported.
Note:
If multiple flags are set, the first
one detected is considered valid.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAAM
Variable data supplied by: CEAAM
Part II:
system Error Processor Messages
25
Page of GC28-2031-7", Issued sept. 3D, 1912 by TNL GN28-3220
6602
6710
Explanation: The failing channel program is
scanned, in reverse, from the failing CCW
until:
Explanation: The TSI lock has remained locked
too long.
Reference Data (Also see Appendix B-Ol~)
Requirement determined by: CEAAN
Variable data supplied by: CEAAN
1. Four CCWs have been scanned -- drum
paging.
6801
2. Four CCWs have been scanned -- disk
paging.
3. Nine CCWs have been scanned -- disk
paging. read-after-write- check option.
If no seek command operation code is
detected, a major software system error is
reported.
Explanation: Auxiliary storage allocation
table (ASAT) lock has remained locked too
long.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAAP
Variable data supplied by: CEAAP
6802
Reference Data (Also see Appendix B-Ol.)
Requirement determined by:
CEAAM
Variable data supplied by:
CEAAM
6603
Explanation: The direct access paging
statistiGal data reGord (CHBPSD) is scanned
(by symboliG device address> until the entry
for the device detecting the paging error is
found.
If no such entry exists, a major
software system error is reported.
~
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAAM
Variable data supplied by: CEAAM
6606
Explanation: The PCBE cannot be found for
failing page operation.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAAM
Variable data supplied by: CEAAM
6667
Explanation: A maximum retry status has been
reached on a busy condition.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAA7
Variable data supplied by: CEAA7
6701
Explanation: An error occurred while
attempting to hang a message on a task's
TSI.
When d GTSI cannot be found H return
from CEAAU occurs. control is returned to
the calling routine.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAAN
variable data supplied by: CEAAN
Explanation: The auxiliary storage allocation
table (A SAT) is searched (by symbolic device
ADDR) for the entry for the failing paging
device.
If no SUGh entry can be found,
control is returned to the calling routine
without suppressing the device.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAAP
variable data supplied by: CEAAP
6901
Explanation: Various page control block (PCB)
flags are tested to determine the type of
paging operation that failed.
If no such
indication can be found, a major software
system error is reported.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAAQ
variable data supplied by: CEAAQ
6902
Explanation: TSI lock has remained locked too
long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAAQ
variable data supplied by: CEAAQ
6903
Explanation:
When a defective medium error is
processed, the defective page count in the
auxiliary storage allocation table entry for
the paging device is to be incremented.
If
no such entry can be found. a major software
system error is reported.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAAQ
Variable data supplied by: CEAAQ
6904
6702
Explanation:
If input message length is zero,
control is returned to calling routine.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAAN
Variable data supplied by: CFAAN
26
Explanation: occurs when further allocation is
suppressed on the last auxiliary storage
device in the system, and the system is
aborted.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAAQ
Variable data supplied by: CEAAQ
Page of GC28-2037-7. Issued Sept. 30. 1972 by TNL GN28-3220
6905
Explanation: Before the "defective page"
counter in the auxiliary allocation table
entry for the device in error is tested. the
GQE deVice type code is tested to determine
whether the device is a 2311 or a 2314 disk.
If neither is indicated, processing resumes,
assuming the disk to be a 2311.
Reference Data (A1so see Appendix B-Ol.)
Requirement determined by: CEAAQ
Variable data supplied by:
CEAAQ
6906
Explanation: The TSI lock has remained locked
too long.
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEAAQ
variable data supplied by:
CEAAQ
6907
Explanation: There can be a maximum of 18
paging operations within an active drum
channel program. If this number is
exceeded, a major software SYSERR is
reported.
Reference Data (Also see Appendix B-01.)
ReqUirement determined by:
CEAAQ
variable data supplied by:
CEAAQ
6908
Explanation: A solid page-in error has
occurred on a shared IVM page.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAAQ
Variable data supplied by: CEAAQ
7201
Explanation: An invalid paging-device code
found in DAIB (direct access interface
block) •
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAAT
Variable data supplied by: CEAAT
7202
Explanation: An invalid paging channel program
length. The PECB (paging error control
block) is checked for number of CCWs in
failing program segment.
If it is not 1, 4,
or 9, a major software system error is
rpported.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAAT
Variable data supplied by: CEAAT
7310
Expla nat.ion: System table lock (SYSTSIAD) has
remained locked too long.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAAU
Variable data supplied by: CEAAU
7401
Explanatcion:
No error status bits are present
in csw status field after an I/O error.
operation is retried specified number of
times.
If all retries fail, processing
continues, assuming the I/O device to be
defective.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAAV
Variable data supplied by: CEAAV
6910
7402
Explanation: Auxiliary storage allocation
table's lOCK has remained locked too long.
Reference Data (Also see Appendix 8-01.)
ReqUirement determined by: CEAAQ
Variable data supplied by:
CEAAQ
7001
Explanation: A solid XTSI/ISA page-in error
for main operator task.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAAQ
Variable data supplied by:
CEAAQ
7102
Explanation: When an element along the I/O
path to the primary paging device (i.e., the
device containing the skeletal XTSI) has
been set defective. and no alternate path is
available. the system is aborted. This
reflect.s a hardware malfunction.
Reference Data (!>.lso see Append ix 8-01.)
Requirement determined by: CEAAS
Variable data supplied by:
CEAAS
Explanation:
No error sense data is present
after a unit check. Operation is retried
specified number of times.
If all retries
fail, processing continues, assuming the I/O
device to be defective.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAAV
Variable data supplied by: CEAAV
7403
Explanation: Hardware unit check -- no record
found.
Processing continues.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAAV
Variable data supplied by: CEAAV
7406
Explanation:
Hardware unit check -- invalid
address det.ected.
Processing continues.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAAV
variable data supplied by: CEAAV
Part II:
system Error Processor Messages
27
Page of GC28-2037-7, Issued Sept. 30,
1972 by TNL GN28-3220
7407
Explanation:
Hardware unit check -- overrun
detected.
Processing continues.
Reference Data (Also see Appendix 6-01.)
Requirement determined by:
CEAAV
Variable data supplied by:
CEAAV
Explanation:
Hardware unit exception detected.
Processing continues.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by:
CEAAV
Variable data supplied by:
CEAAV
7416
7408
Explanation:
Hardware unit check -- command
reject.
Processing continues_
Reference Data (Also see Appendix B-Ol.)
Requirement determined by:
CEAAV
Variable data supplied by:
CEAAV
71109
Explanation:
Hardware unit check -- track
overrun detected.
Processing continues.
Reference Data (Also see Appendix 6-01.)
Requirement determined by:
CEAAV
Variable data supplied by:
CEAAV
7410
Explanation:
Hardware unit check -- end of
cylinder detected.
Processing continues.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by:
CEAAV
Variable data supplied by:
CEAAV
Explanation:
Hardware incorrect length
detected.
Processing continues.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by:
CEAAV
Valiable data supplied by:
CEAAV
7417
Explanation:
Hardware unit check -- overflow
incomp.lete detected.
Processing continues.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by:
CEAAV
Variable data supplied by:
CEAAV
7418
Explanation:
Hardware unit check -- track
condition check detected.
Processing
continues.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by:
CEAAV
Variable data supplied by:
CEAAV
7424
7411
Explanation:
Hardware unit check -- file
protect detected.
Processing continues.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by:
CEAAV
Variable data supplied by:
CEAAV
Explanation:
Hardware unit Check -- no record
found; address markers present; correct
track error detected.
Processing continues.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by:
CEAAV
Variable data supplied by:
CEAAV
7425
7412
Explanation:
Hardware chaining check detected.
Processing continues.
Reference Data (Also see Appendix B-01.)
Requirement determined by:
CEAAV
Variable data supplied by:
CEAAV
Explanation:
Hardware unit check -- seek check
detected.
Processing continues.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by:
CEAAV
Variable data supplied by:
CEAAV
7500
7413
Explanation:
Hardware program check detected.
Processing continues.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by:
CEAAV
Variable data supplied by:
C~V
Explanation:
CEABA has received an invalid
return from Reverse pathfinding.
Reference Data (Also see Appendix B-01.)
Requirement determined by:
CEABA
Variable data supplied by:
CEABA
7501
7411,\
Explanation:
Hardware protection check
detected.
Processing continues.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by:
CEAA V
Variable data supplied by:
CEAAV
Explanation:
CEABA has received an invalid
return code from the Line Control
Subroutine.
Reference Data (Also see Appendix B-01.)
Requirement determined by:
CEABA
Variable data supplied by:
CEABA
7502
28
Page of GC28-2037-7, Issued sept. 30, 1972 by TNL GN2S-3220
Explanation: CEABA encountered an invalid
command code.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEABA
Variable data supplied by,
CEABA
Requirement determined by:
Variable data supplied by:
CEABB
CEABB
7602
7503
Explanation: A channel program ended
unexpectedly.
Reference Data (Also see AppEmdix B-O 1.)
Requirement determined by: CEABA
Variable data supplied by::
CEABA
Explanation: CEABB encountered an invalid
command code.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEABB
Variable data supplied by: CEABB
7603
7504
Explanation:
CEABA received an unexpected
interrupt from a sense operation.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEABA
Variable data supplied by:
CEABA
Explanation: CEABB detected a sequence of I/O
errors for which no retry is possible.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEABB
Variable data supplied by: CEABB
1605
1505
Explanation: An I/O error condition was
detected. but no sense bits were set.
Reference Data (Also see Appendix B-01.)
Requirement determined by:
CEABA
Variable data supplied by:
CEABA
Explanation: An I/O error condition was
detected. but no sense bits were set.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEABB
Variable data supplied by: CEABB
7606
7506
Explanation: An error return was received from
Forward Pathfinding.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by' CEABA
Variable data supplied by:
CEABA
Explanation: An error return was received from
Forward Pathfinding.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by:
CEABB
Variable data supplied by:
CEABB
7607
7507
Explanation: The TSI lock has remained locked
too long.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEABA
Variable data supplied by:
CEABA
Explanation: The TSI lock has remained locked
too long.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEABB
Variable data supplied by: CEABB
7610
7508
Explanation: The Device Group Table lock
(DEVLOCK) has remained locked too long.
Reference Data (Also see Appendix B-Ol.)
Variable data supplied by:
CEABA
Requirement determined by:
CEABA
Explanation: TSI lock has remained locked too
long.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAAN
Variable data supplied by: CEAAN
7701
7600
Explanation: CRABB received an error return
from Reverse Pathfinding.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEABB
Variable data supplied by:
CEABB
Explanation: An impossible combination of Scan
Table flags was detected by CEABC
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEABC
Variable data supplied by:
CEABC
7702
7601
Explanation: CRABB received an invalid return
code from line control.
Reference Data (Also see Appendix 3-01.)
Explanation: An illegal pathfinding request
was detected during CEABC processing.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEABC
Variable data supplied by:
CEABC
Part II:
System Error Processor Messages
29
Page of GC28-2037-7. Issued Sept. 30, 1912 by TNL GN2B-3220
1703
Explanation: CEASC encountered an invalid RJE
device type code,.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEA8C
Variable data supplied by: CEASC
1704
Explanation: Invalid input parameters were
passed to CEABC.
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEASC
Variable data supplied by: CEASC
7705
Explanation: A physical path could not be
released.
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEASC
Variable data supplied by: CEA8C
Tl06
Explanation: A path translation error was
detected.
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEABC
Variable data supplied by: CEASC
7708
Explanation: A Device Group Table lock
(DEVLOCK) has remained locked too long.
Reference Data (Also see Appendix B-01.>
Requirement determined by: CEASC
Variable data supplied by: CEABC
7901
Explanation: The module in which the error
occurred is CEAAK -- set asynchronous entry
SVC. The symbolic-to-actual conversion
table -- CRASAC -- has bee n exhausted
without finding a match to the symbolic
device address in general register 1.
Processing continues.
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEAAK
Variable data supplied by: CEAAK
7902
Explanation: The device group table flags are
not consistent with input to the SETAE macro
instruction. which provides input to CEAAK.
For example* if the device is an MTT device:
(1) the DEVMT flag is on, indicating an MTT
device; (2) the task 10 is in a register
other than 0; and (3) the SDA must be in the
task symbolic device list. Processing
continues with an exit to the Queue Scanner.
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEAAK
Variable data supplied by: CEAAK
30
7910
Explanation: Device group table· lock has
remained locked too long.
Reference Data (Also see Appendix B-Ol~)
Requirement determined by: CEAAK
variable data supplied by: CEAAK
7920
Explanation: TSI lock has remained locked too
long,.
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEAAK
Variable data supplied by: CEAAK
8203
~lanation:
TSI lock has remained locked too
long.
Reference Data (Als6 see Appendix B-01.)
Requirement determined by: CEAKR
Variable data supplied by: CEAKR
8301
Explanation: . System Table lock (SYSTIMLR) has
remained locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAS1
Variable data suppl'ied by: CEAS1
8501
Explanation: The device was not found in the
Symbolic-to-Actual conversion table.
Reference Data (Also see Appendix B-O 1.)
Requirement determined by: CEAAD
Variable data supplied by: CEAAD
8601
Explanation: System table time lock (SYSTIMLK)
has remained locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAS6
Variable data supplied by: CEAS6
8810
Explanation: System table lock (SYSSHALK) has
remained locked too long.
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEAMW
Variable data supplied by: CEAMW
8830
Explanation: system table lock (SYSTSKLK) has
remained locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAMW
Variable data supplied by: CEAMW
8841j
Page of GC28-2037-7, Issued Sept. 30. 1972 by TNL GN28-3220
Explanation: An error was dl?tected in the
shared page chain in the Core Block Table.
Reference Data (Also see Ap~?ndix B-01.)
Requirement determined by: CEAMW
Variable data supplied by: CEAMW
Requirement determined by:
Variable data supplied by:
CEAS8
CEAS8
8903
8845
Explanation: System Table lock (SYSMWL10 has
remained locked too long.
Reference Data (Also see Appendix B-Ol.)
Requirement determined by: CEAMW
Variable data supplied by:: CEAMW
Explanation: System Table lock (SYSTIMLK) has
remained locked too long.
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEAS8
Variable data supplied by: CEAS8
8905
8847
Explanation: System Table lock (SYSMWLlO has
remained locked too long.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAMW
Variable data supplied by:: CEAMW
Explanation: System Table lock (SYSTIMLK) has
remained locked too long .•
Reference Data (Also see Appendix B-01.)
Requirement determined by: CEAS8
Variable data supplied by: CEAse
8907
8902
Explanation: System Table l(~k (SYSTIMLK) has
remained locked too long.
Reference Data (Also see Appendix B-01.)
Explanation: System Table lock (SYSTIMLK) has
remained locked too long.
Reference Data (Also see Appendix 8-01.)
Requirement determined by: CEAse
Variable data supplied by: CEAse
Part II:
System Error Processor Messages
31
Page of GC28-2037-7, Issued Sept. 30. 1972 by TNL GN28-3220
SYSER MACRO MESSAGES
Requirement determined by:
Variable data supplied by:
CZCTC
CZCTC
020601241
020800901
Explanation: A unit check occurred. but no
sense bits ~ere set.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCMG
variable data supplied by: CZCMG
Explanation: Solid or intermittent error flag
not on in error block passed from real
storage (CEATCS).
Reference Data (Also see Appendix B-02.>
Requirement determined by: CZCTR
Variable data supplied by: CZCTR
020601242
Explanation: The error search routine was
entered, but no CSW status bits were on.
Reference Data (Also see Appendix B-02.)
" Requirement determined by: CZCMG
Variable data supplied by: CZCMG
020601243
Explanation: A unit exception was detected in
get mode. but neither ETX not ETB was found.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCMG
Variable data supplied by: CZCMG
020601244
Explanation: An RJE DEB to be released could
not be found.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCMI
Variable data supplied by: CZCMI
020800401
Explanation: Error return from the PRMPT macro
instruction. Attempt to issue a message to
SYSOUT failed.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCTC
Variable data supplied by: CZCTC
020800402
Explanation: FINDQ detected an invalid work
byte in a TCT slot.
Reference Data (Also see Appendix 8-02.)
Requirement determined by: CZCTC
Variable data supplied by: CZCTC
020800403
Explanation: Invalid return from FREEQ. A
check of the return code from issuing a
FREEQ indicates that the FREEQ was not
successful.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCTC
Variable data supplied by: CZCTC
020800902
Explanation: Error block does not indicate
whether an inboard or outboard error
occurred on solid I/O failure.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCTR
Variable data supplied by: CZCTR
020800903
Explanation: Invalid symbolic device address
in error block passed from real storage.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCTR
Variable data supplied by: CZCTR
020800904
Explanation:
Invalid return from SIR. This
indicates that error blocks passed up from
real storage will not be processed.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCTR
variable data supplied by: CZCTR
040203601
Explanation: A program or protection check in
the csw terminated the I/O operation (CSW
status = Ol.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCRP
Variable data supplied by: CZCRP
040203602
Explanation: A program or protection check in
the csw terminated the I/O operation.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCRP
Variable data supplied by: CZCRP
040203603
Explanation: Symbolic device address does not
exist in SDT tables.
Reference Data (Also see Appendix 8-02.)
Requirement determined by: CZCRP
Variable data supplied by: CZCRP
020800404
Explanation: A known valid STE entry was
passed from CZCTC to the SVC CHANGE
PROCESSOR (CEAR3) and was rejected.
Reference Data (Also see Appendix B-02.)
32
040203604
Explanation: Invalid Set Interrupt Request
(SIR) macro return code.
Page of GC28-2037-7. Issued Sept. 30. 1972 by TNL GN28-3220
Reference Data (Also see Appendix B-02~)
Requirement determined by: CZCRP
Variable data supplied by: CZCRP
040203605
Explanation: Invalid Delete Interrupt Request
(DIR) macro return code.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCRP
040203606
Explanation: A protection check or program
check occurred during the execution of a
channel program.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCRH
Variable data supplied by: CZCRH
040203607
Explanation: A command reject occurred during
the execution of a direct access channel
program.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCRH
Variable data supplied by: CZCRR
Requirement determined by:
Variable data supplie1 by:
CZCZA
CZCZA
040502901
Explanation: CLOSEVAM has received an error
return from search shared data set table
(CZCQE-SRCHSDST). Error indication is other
than 4.
Dump Code:
20
Reference Data (Also see Appendix 8-26.)
Requirements determined by: CZCOBl
Variable data supplied by: N/A
Message residence: CZCOBl
040502902
Explanation: CLOSEVAM has received an error
indication from STOW (CZCOR). A member was
found checked out and STOW was called for
it.
Dump Code: 20
~eference Data (Also see Appendix B-26.)
Requirement determined by: CZCOB1
Variable data supplied by: IVA
Message residence: CZCOB1
0~0502903
040402601
Explanation: CHECR has returned to the TAM
CLOSE SYNAn return. and the DECB is posted
with the system error flag on.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCYG
variable data supplied by: CZCYG
Explanation: Data set now being processed was
found to have directory pages in existence,
but set is neither partitioned or index
sequential.
Dump Code: 20
Reference Data (Also see Appendix B-26.)
Requirement determined by: CZCOB1
Variable data supplied by: N/A
Message residence: CZCOB1
0404·02801
040502904
Explanation: Error caused by an invalid
symbolic device address.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCZA
Variable data supplied by: CZCZA
040402802
Explanation: Error caused by an undefined
inboard error condition.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCZA
Variable data supplied by: CZCZA
040402803
Explanation: Error caused by an undefined
interrupt.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCZA
Variable data supplied by: CZCZA
040402804
Explanation: Error caused by absence of sense
data on a unit check.
Reference Data (Also see Appendix B-02.)
Explanation: CLOSEVAM has received an error
return from MOVEPAGE (CZCOC). MOVEPAGE was
called because POD integrity bit was on. and
POD was to be written out.
Dump Code:
20
Reference Data (Also see Appendix 8-26.)
Requirement determined by: CZCOB1
Variable data supplied by: N/A
Message residence: CZCOB1
040502905
Explanation: CLOSEVAM has received an error
return from DELVAM (CZCFT). Call to DELVAM
was to delete a catalog entry for last CLOSE
on data set.
Dump Code:
20
Reference Data (Also see Appendix B-26.)
Requirement determined by: CZCOBl
Variable data supplied by: N/A
Message residence: CZCOB1
040503001
Explanation: MOVEPAGE encountered an invalid
relative volume number.
Refe.rence Data (I\lso see Appendix B-02.)
Part II:
system Error Processor Messages
33
Page of GC28-2037-1. Issued Sept. 30. 1912 by TNL GN28-3220
Requirement determined by:
Variable data supplied by:
CZCOC
CZCOC
040503002
Explanation: CZCOF received an error return
from REQUEST PAGE - CZCOE.
Reference Data (Also see Appendix B-02.>
Requirement determined by: CZCOF
variable data supplied by: CZCOF
040503003
Explanation: CZCOE received an invalid return
code from FINDEXPG - CZCEL.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCOE
Variable data supplied by: CZCOE
040503004
Explanation: CZCOO received an invalid return
code from INSERT PAGE - CZCOF.
Reference Data (Also see Appendix B-02 .• )
Requirement determined by: CZCOO
Variable data supplied by: CZCOO
040503005
Explanation: CZCOM received an invalid return
code from INSERT PAGE - CZCOF.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCOM
Variable data supplied by: CZCOM
0140503101
Explanation: CZCOD received an ~nvalid return
code from INSERT PAGE - CZCOF.
Reference Data (Also see Appendix 8-02.)
Requirement determined by: CZCOD
Variable data supplied by: CZCOD
040503501
Explanation: Error caused by the passing of an
invalid parameter regarding the type or
interlock to be reset.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCOH
variable data supplied by: CZCOH
040503601
Explanation: Error caused by the passing of an
invalid parameter indicating the type of
interlock to be reset.
Reference Data (Alsd see Appendix B-02.)
Requirement determined by: CZCOI
Variable data supplied by: CZCOI
040504003
Explanation:
One of the data sets calling
DUPOPEN is not a public set.
Field TDTVl in
the reference JFCB is checked to confirm if
public.
DUPOPEN can only be called for
public sets.
Dump Code:
20
Reference Data (Also see Appendix B-26.)
Requirement determined by: CZCEYl
Variable data supplied by: N/A
Message residence: CZCEYl
040503006
Explanation: CZOQK received an invalid return
code from EXTPOD - CZCOM.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCOK
Variable data supplied by: CZCOK
040503001
Explanation: FLUSHBUF received an invalid
return code from DELETE PAGE - CZCOD.
Reference Data (Also see Appendix B-02.>
Requirement determined by: CZCOV
Variable data supplied by: czcov
040503008
Explanation: GETPAGE received an invalid
return code from DELETE PAGE - CZCOD.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCPI
Variable data supplied by: CZCPI
040504004
Explanation: DUPOPEN has been called for a
data set that is not of VAM origin. Field
TDTDSV is checked to confirm this.
Dump Code:
20
Reference Data (Also see Appendix 8-26.)
Requirement determined by: CZCEYl
Variable data supplied by: N/A
Message residence: CZCEYl
040504005
Explanation: Duplicate data sets have been
opened, but key DCB fields are not
identical. The fields Checked are normal
source key operands for a DCB. ABEND
message will indicate DCB field.
Dump Code: 20
Reference Data (Also see Appendix B-26.)
Requirement determined by: CZCEYl
Variable data supplied by: N/A
Message residence: CZCEYl
040503009
040504101
Explanation: CZCPL received an invalid return
code from DELETE PAGE - CZCOD.
Rererence Data (Also see Appendix B-02.)
Requirement determined by: CZCPL
variable data supplied by: CZCPL
34
Explanation: This is an indication that one of
the sets passed as a parameter to DUPCLOSE
is not of VAM origin.
Field DCBDSO is
checked for this.
Page of GC28-2037-7, Issued Sept. 30, 1972 by TNL GN28-3220
Dump Code:
20
Reference Data (Also see Appendix B-26.)
Requirement determined by: CZCEZ 1
Variable data supplied by: N/A
Message residence: CZCEZ-'
040802710
Explanation: A VPAM Data Set Member Header was
locked, but no active DCB Headers existed.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCOJ
Variable data supplied by:
CZCOJ
041002501
Explanation: The statistical data record entry
in the statistical data tdble for the I/O
device specified in the symbolic device
address (IORSD) field of the IORCB in the
user's interrupt storage drea cannot be
located.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCRY
Variable data supplied by: CZCRY
01j1002601
Explanation: The task 10 of the issuing
program did not match that of the task/task
interlock.
Reference Data (Also see Appendix B-·02.)
Requirement determined by: CZCRX
Variable data supplied by:
CZCRX
0'-11202801
Explanation: An error return code was received
from DIR.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCMF
Variable data supplied by: CZCMF
041202802
Explanation: MSAM READ/WRITE has been linked
to with a DECB whose completion code is
neither READ/WRITE REQUEST nor COMPLETE WITH
ERROR.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCMF
Variable data supplied by: CZCMF
0'-11202803
Explanation: MSAM READ/WRITE has been invoked
to reissue an IORCB that failed. even though
the DEB associated with the device indicates
a permanent error (DEBNF2 is on).
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCMF
Variable data supplied by: CZCMF
041202901
Explanation: The CSW status in the IORCB is
zero.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCMG
variable data supplied by: CZCMG
01j1202501
Explanation: An invalid return code was
received from the CKCLS macro.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCMC
variable data supplied by: CZCMC
041202902
Explanation: CCW specification error incorrect IORCB.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCMG
Variable data supplied by: CZCMG
01j1202601
Explanation: Nonzero (error) return code was
received from WTO.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCMD
Variable data supplied by: CZCMD
Olj1202602
Explanation: A nonzero (error) return code was
received from SIR.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCMD
Variable data supplied by: CZCMD
Olj1202603
Explanation: An error return code was received
from DIR, which in main entry should give a
return code of 0 and in asynchronous entry
should give a return code of 12.
Reference Data (Also see Appendix B-02.>
Requirement determined by: CZCMD
Variable data supplied by: CZCMD
041202903
Explanation: SETUR was not called previously
(DBPCKEV1-0); this means the UCS buffer was
never loaded.
Reference Data (Also see Appendix B-02.)
Requirement determined hy: CZCMG
variable data supplied by: CZCMG
041202901j
Explanation:
Program or protection- check bits
are set in' the -ISA status byte.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCMG
Variable data supplied by: CZCMG
Oll1202906
Explanation:
Device entry not preset in SOT.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCMG
Variable data supplied by: CZCMG
Part II:
system Error Processor Messages
35
Page of GC28-20J'1-7. Issued sept .• 30, 1972 by TNL GN28-3220
041202901
Explanation: Nonzero return code was received
from SIR. OIR. or WTO.
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZCMG
Variable data supplied by:
CZCMG
050202501
Explanation:
Error caused by SYNAD exit taken
when searching the batch work queue (BWQ)
following a GET.
Processing continues with
another GET.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZABA
Variable data supplied by: CZABA
041203001
Explanation: A nonzero (error) return code was
received from WTO.
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZCMH
Variable data supplied by:
CZCMH
041203002
Explanation: A nonzero (error) return code was
received from SIR.
Reference Data (Also see Appendix B-02.>
Requirement determined by:
CZCMH
Variable data supplied by:
CZCMH
041203003
Explanation: An error return code was received
from DIR, which in main entry should give a
return code of 0 and in asynchronous entry
should give a return code of 12.
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZCMH
variable data supplied by:
CZCMH
041203101
Explanation: A nonzero (error) return code was
received from DIR.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCMI
Variable data supplied by:
CZCMI
041203102
Explanation:
Error return code from Interrupt
Inquiry (INTINQ) macro.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCMI
variable data supplied by:
CZCMI
050106102
Explanation: Error caused by a return code
other than zero given by DDEF, indicating
that either DDEF was not working properly.
or was not able to fill in the JFCBs for the
system data sets .•
Reference Data (Also see Appendix B-02.>
Requirement determined by:
CZAAF
Variable data supplied by:
CZAAF
050202502
Explanation:
Error cause1 by a SYNAD exit
taken after unsuccessful VISAM/WRITE with
RETRIEVAL.
processing continues as if WRITE
has been successful.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZABA
Variable data supplied by:
CZABA
050202503
Explanation: This system error results from a
pre-LOGON abnormal termination prior to
initialization of the Operator TaSK/Batch
Monitor.
The system will enter into a loop,
as NSI for diagnostic purposes, in CZABA's
PSECT after issuing RUN.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZABA
Variable data supplied by: CZABA
050202505
Explanation:
An invalid return code has been
received from a SIR macro instruction .•
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZABA
variable data supplied by: CZABA
050202514
Explanation:
Error caused by the BULKIO
routine requesting task initiation not
setting the BWQAC (batch work queue activity
flag) field correctly (in the BULKIO
sub-processor CZABA4).
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZABA
Variable data supplied by: CZABA
050202515
Explanation:
Error is reported when, for a
BULKIO/RTAPE, the CTLG parameter is not
present, and the TATYPE parameter is not
indicative of 7-track, 7-track with data
conversion, or 9-track (in the BULKIO
sub-processor CZABA4).
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZABA
variable data supplied by: CZABA
050106103
050202528
Explanation: Error caused by not being able to
access all JFCBs.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAAF
Variable data supplied by:
CZAAF
36
Explanation:
Error caused by a DELREC
subroutine.
LOCATE was unable to return the
data set descriptor level SBLOCK for this
task.
Page of GC28-2031-1. Issued Sept. 30, 1912 by TNL GN28-3220
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZABA
variable data supplied by: CZABA
050202530
Explanation: Error caused by ADDCAT not
successfully completing an addition to the
catalog.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZABA
Variable data supplied by: CZABA
Requirement determined by:
Variable data supplied by:
CZABD
CZABD
050202816
Explanation: Error caused by an invalid return
code from VSENDR.
Reference Data (Also see Appendix B-02 .• )
Requirement determined by: CZABD
Variable data supplied by: CZABD
050202811
050202601
Explanation: Error caused by an invalid return
code from a called module. Return code may
be found in /RTNCOD/.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZARB
Variable data supplied by: CZABB
Explanation: Error caused by an invalid return
code from MSGWR-ACPT (acceptance message
entry, when no response is desired).
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZABD
Variable data supplied by: CZABD
050202818
050202602
Explanation: Error caused by a VSEND to the
batch monitor not being completed .•
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZABB
Variable data supplied by: CZABB
Explanation: Error caused by an invalid return
code from CHKNUM.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZABD
Variable data supplied by: CZABD
050202819
050202700
Explanation: Error caused by an invalid return
code from a called routine.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZABC
Variable data supplied by, CZABC
050202801
Explanation: Error caused by an invalid tape
type in system common.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZABD
Variable data supplied by: CZABD
050202812
Explanation: Error caused by an invalid return
code from LOCATE.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZABD
Variable data supplied by: CZABD
050202813
Explanation: Error caused by an invalid return
code from CHEKDS.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZABD
Variable data supplied by: CZABD
050202814
Explanation: Error caused by an invalid return
code from FINDDS.
Reference Data (Also see Appendix B-02.)
Explanation: Error caused by an invalid return
code from MSGWR (MSGOT, used to issue
messages when response is expected) .•
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZABD
Variable data supplied by: CZABD
050202820
Explanation: Error caused by an invalid return
code from NEXTPAR.
Reference Data (Also see Appendix B-02.>
Requirement determined by: CZABD
variable data supplied by: CZABD
050203001
Explanation: Error caused by an invalid return
code from a called module.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZABF
Variable data supplied by: CZABF
050203002
Explanation: Error caused by an error return
code from a called module.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZABF
Variable data supplied by: CZABF
05020)003
Exp1anation: CZABG received an error return
code from INTENQ.
Reference Data (Also see Appendix B-02.)
Part II:
system Error Processor Messages
31
Page of GC2B-2031-1. Issued Sept. 30. 1912 by TNL GN28-J220
Requirement determined by:
Variable data supplied by:
CZABG
CZAnG
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZABI
Variable data supplied by: . CZABI
050203101
050203401
Explanation:
Error caused by an invalid return
code from a called module.
Reference Data (Also see Appendix B-02 .• )
Requirement determined by:
CZAnG
Variable data supplied by:
CZAnG
Explanation:
Error caused by detection of an
invalid return code.
Return code may be
found in location /RTNCOD/.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZABJ
Variable data supplied by: CZABJ
050203102
Explanation:
Error caused by an error return
code from a called module.
Clf the error
occurred during UCS buffer loading on a 1403
printer. the error may have been caused by a
defective carriage control tape.)
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZABG
Variable data supplied by:
CZABG
050203402
Explanation:
Error caused by failure to
complete VSEND to the batch monitor.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZABJ
Variable data supplied by: CZABJ
05020340J
050203105
Explanation:
The DSORG field in the S-BLOCK
for a data set to be printed was not VI. VS,
or PS.
Reference Data (Also see Appendix B-02.)
.
Requirement determined by:
CZABG
Variable data supplied by:
CZA8G
Explanation:
Error caused by an invalid return
message from batch monitor to CANCEL.
Reference Data (Also see Appendix B-02.>
Requirement determined by:
CZABJ
Variable data supplied by:
CZABJ
050302601
050203201
Explanation:
Error caused by an invalid return
code from a called module.
Reference Data (Also see Appendix 8-02.)
Requirement determined by:
CZABH
Variable data supplied by:
CZABH
Explanation:
Error caused by invalid return
code from MSGWR when asking for date.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZACB
Variable data supplied by:
CZACB
050302602
050203202
Explanation:. Error caused by an error return
code from a called module.
Reference Data (Also see Appendix B-02.)
Requirement. determined by:
CZABEI
Variable data supplied by:
CZABH
Explanation:
Error caused by invalid return
code from MSGWR when asking for date.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZACB
Variable data supplied by:
CZACB
0';0302603
050203203
~lanation,
Error caused by invalid
asynchronous interrupt.
Reference Dat.a (Also see Appendix B-02.)
Requirement determined by:
CZABH
variable dat.a supplied by:
CZABH
Explanation:
Error caused by lffisuccessful
VSEND for configuration message to the
operator, or invalid return code.
Reference Data (Also see Appendix 8-02.)
Requirement determined by:
CZACB
Variable data supplied by: CZACB
050302604
050203301
Error caused by an invalid return
code from a called module.
Reference Data (Also see Appendix 8-02.)
Requirement. determined by: CZABT
variable data supplied by:
CZABI
Explanation~
050203302
~xplanation:
Error caused by an error return
code from a called module.
38
Explanation:
Error caused by invalid MSGWR
return code of unsuccessful attempt to issue
STARTUP complete message.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZACB
Variable data supplied by:
CZACB
050302605
Explanation:
Error caused by SCRTSI not
creating a batch monitor task wit.h a task 10
page of GC28-2037-7, Issued Sept. 30, 1972 by TNL GN28-3220
of 2.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZACB
Variable data supplied by: CZACB
050302606
Explanation: Error called by main operator's
housekeeping routine because of an abnormal
return from DDEF. The return code_indicated
that DDEF failed to create the SYSLOG data
set.
Reference Oata (Also see Appendix B-02.>
Requirement determined by: CZACB
Variable data supplied by: CZACB
050302601
Explanation: Error caused by invalid return
code from the scan of a data response from
SCAN.
Reference Data (Also see Appendix B-02.>
Requirement determined by: CZACB
Variable data supplied by: CZACB
050302903
Explanation: Error caused when return code
indicates MSGWR was not successful or return
code was inValid.•
Reference Data (Also see Appendix B-02.>
Requirement determined by: CZACG
Variable data supplied by: CZACG
050302904
Explanation: Error caused when VSEND to log
off task was not successful.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZACG
Variable data supplied by: CZACG
050303001
Explanation: Error caused by an I/O error when
reading the USER table or writing on SYSLOG..
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZACF
variable data supplied by: CZACF
050302608
Explanation: Error caused by invalid return
code after the scan of the time response
from MSGWR.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZACB
Variable data supplied by: CZACB
050303801
Explanation: Error caused by failure to
complete VSEND successfully.
Reference Data (Also see Appendix 8-02.>
Requirement determined by: CZACN
variable data supplied by: CZACN
050302609
050303803
Explanation: Error caused by an invalid return
code from the VSEND issued to activate Batch
Monitor, or an unsuccessful VSEND.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZACB
Variable data supplied by: CZACB
Explanation: Error caused by print request for
SYSLOG not being accepted by BULKIO
preprocessor.
Reference Data (Also see Appendix 8-02.>
Requirement determined by: CZACN
variable data supplied by: CZACN
050302802
050303805
Explanation: Error caused by the reply code in
the message queue not matching the reply
checking table code. An invalid reply
checking table entry.
Reference Data (Also see Appendix B-02.)
Requirement determined by:. CZACD
Variable data supplied by:
CZACD
Explanation: Error caused by an invalid return
code received from a called module.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZACN
Variable data supplied by: CZACN
050502500
050302901
Explanation: Error caused by invalid return
code from NEXTPAR when checking the userid.
Reference Oata (Also see Appendix B-02.>
Requirement determined by: CZACG
Variable data supplied by: CZACG
Explanation:
Error caused by invalid
conversational (TCMCOV) or confirrnational
(TCMCDF) field in task common.
Reference Data (Also see Appendix B-02.>
Requirement determined by: CZAEA
variable data supplied by: CZAEA
050302902
Explanation: Error caused by SYNAD error exit
when reading USER table.
Reference Data (Also see Appendix 8-02.)
Requirement determined by: CZACG
Variable data supplied by: CZACG
Explanation: Error caused by invalid time in
system common.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEA
variable data supplied by: CZAEA
Part II:
system Error Processor Messages
39
Page of GC28-20)7-7, Issued Sept .• 30.
1972 by TNL GN28-3220
050502502
Explanation:
Error caused by an invalid DSNAME
from PINDOS or an error in scan routine in
DDEF: bug in DSNAME.
Reference Data (Also see Appendix B~02.)
Requirement determined by: CZAEA
Variable data supplied by:
CZAEA
050502503
Requirement determined by:
Variable data supplied by:
CZAEA
CZAEA
050502510
.Explanation:
Error caused by an invalid .return
code from MTREQ.
MTREQ was called to
allocate devices for a private data set.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEA
Variable data supplied by:
CZA.EA
:!,xpl~.nat:'~(2!l"':"
Error caused by an invalid ret.urn
code from CHEKDS which was called t.O
val idate DSNAME.
Reference Data (Also see Appendix B-O 2. )
Requirement determined by:
CZAEA
Variable data supplied by:
CZAEA
0',0502504
Error caused by an invalid return
code from LOCATE.
LOCATE is called to
:c~edrch the catalog for a dupLicate DSNAt-1E.
Reference Data (Also see Appendix B-02.)
--Requirement determined by: CZAEA
Variable dat.a mlFplied by:
CZAEA
050502511
~~nati.~
ELl:or caused by return code from
M'THEQ indicat ing the volume request.ed to be
mount.ed could not be found.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEA
Variable data supplied by:
CZAEA
~~'.:.~anatiofl:"
05050250';
ExpJ:.anat.ion=- Error caused by an invalid fully
qualified name from I.OCATE or SBI.OCK which
is not a OS descriptor.
Reference Data (Also see Appendix B-02.>
ReqUirement determined by:
CZAEA
Variable data suppU ed by:
CZAEA
050502506
bxplanation:
ECTor caused by an invalid return
code from F'INDDS.
FIND!)S was called to
search the TDT for a duplicate DSNAME.
Reference Data 0\1so see Appendix 8-02.)
Hequirement· determined by:
CZAEA
Variable data supplied by:
CZp,r,l\
050';02507
~?92~canation:
Error caused by logic error
within DDEF in DCB parameters.
Heference Data (Also see Appendix B-02.)
--Requirement det.ermined by:
CZAEA
Variable data supplied hy:
CZAEA
!,,-~lanation:
Error caused by an invalid return
code from RELEAS.
RELEAS was called to
release devices allocated for a private data
"et.
Reference Data (Also see Appendix B-02.)
~equirement determined by:
CZAEA
Variable data supplied by:
CZAEA
050502513
Exe:.lanation,. Error caused by inconsistency of
address within message response area.
End
oE field address is not greater than next
available address for response.
Reference Data (Also see Appendix B-02.)
Hequi rement. determined by: CZAEA
Variable data supplied by:
CZAEA
050502':'14
Exnldnat:ion:
Error caused by invalid return
'··--cocfe~ from MSGWR (MSGOUT).
MSGWR is cdlled
t.O Gend and receive messages from SYSOUT.
Reference Data (,'I.lso see Appendix B-02.)
---ReqUirement determined by: CZAEA
Variable data supplied by:
CZAEA
050502'115
~J)ldnat:ion:
EXDlanation:
Error caused by an invalid return
code from LOCJ\TE for SBLOCK of next volUme.
Refe~ence Data (Also see Appendix 8-02.)
Requirement dete:nnined by'
CZAEA
Variable data supplied by:
CZAEA
F:rror caused by an invalid return
code from GATRD.
Gi'lTRD is called to read
parameter list from SYSIN.
Reference Data (Also see Appendix B-02.)
l{equirement determined by: CZAEA
Varjable data supplied by:
CZi'lEA
0')0502';16
0')0502509
g~~nation~.
ErrOl: caused by an invalid return
code h·om ALLOCATE. ALLOCATE is called to
allocat.e space for a public data set.
!3.Qference f).9.!:.~ (Also see Appendix B-02.)
40
Error caused by invalid delimiter
from SCAN routine in DDEF.
Probably an
error in GETPAR or scan routine with DDEF.
Reference Data (Also see Appendix 3-02.)
ReqUirement. determined by:
CZAEA
Variable data supplied by:
CZAEA
.!?xpl~ndtion:
page of GC28-2037-1, Issued Sept. 30, 1912 by TNL GN28-3220
050502511
Explanation: DDEF automatically catalogs new
VAM public data sets. If ADDCAT gives other
than a good return, DDEF will abend at that
point. An invalid return code from ADDCAT.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
050502518
Explanation: The Confirmation Save Area has an
invalid format.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
050503102
Explanation:
Error reported for invalid return
codes from called modules.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEG
Variable data supplied by: CZAEG
050503104
Explanation: Error caused by SYNAD error
trying to write the replacement line out to
the data set.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEG
Variable data supplied by: CZAEG
050502660
Explanation: Error caused by invalid return
code from BUMP routine. Either the return
is not a valid code or the return specifies
that reverification of label is not possible
or device type is incorrect. BUMP was
called to replace a mounted volume.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEB
Variable data supplied by: CZAEB
050503105
Explanation: Error caused by SYNAD error
trying to write an insertion out to the data
set.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEG
Variable data supplied by: CZAEG
050503302
050502661
Explanation: Error caused by invalid return
code from MTREQ. Either t:he return code is
not legal. the return specifies an illegal
device code or SDA, or the Ie is no
reservation for this request from a
nonconversational user. MTREQ was called to
mount volumes in JFCB.
Reference Data (Also see Appendix B-02.)
Requirement determined by~ CZAEB
Variable data supplied by:. CZAEB
050502102
Explanation: Error caused by absence of right
parenthesis after relative generation
number.
Reference Data (Also see Appendix 8-02.)
Requirement determined by, CZAEC
Variable data supplied by' CZAEC
Explanation: Error caused by invalid return
code from MSGWR.
Reference Data (Also see Appendix B-02.>
Requirement determined by: CZAEI
Variable data supplied by: CZAEI
050503304
Explanation: Error caused by invalid return
code from NEXTPAR.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEI
variable data supplied by: CZAEI
050503306
Explanation: Error caused by invalid return
code from CHEKDS.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEI
variable data supplied by: CZAEI
050502704
Explanation: Error caused by invalid return
code from LOCATE. or by LOCATE not replacing
the relative generation number with an
absolute one.
Reference Data (Also see Appendix B-02.>
Requirement determined by: CZAEC
Variable data supplied by: CZAEC
050502106
Explanation: Error caused ~1 invalid return
code from DDEF.
Reference Data (Also see Appendix B-02.>
Requirement determined by: CZAEC
Variable data supplied by: CZAEC
050503308
Explanation: Error caused by invalid return
code from CHKNUM.
Reference Data (Also see Appendix B-02.>
Requirement determined by: CZAEI
variable data supplied by: CZAEI
050503310
Explanation: Error caused by invalid return
code from FINDDS.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEI
variable data supplied by: CZAEI
Part II:
system Error Processor Messages
41
Page of GC28-20J1-7. Issued sept. 30,
1972 by TNL GN28-3220
050503314
Explanation:
Error caused by invalid return
code from DELCAT .•
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZAEI
Variable data supplied by:
CZAEI
050503404
Explanation:
Error caused by unsuccessful
return from MSGWR.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEJ
Variable data supplied by: CZAEJ
05050]316
050503405
Explanation:
Error caused by invalid return
code from RENAME.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEI
Variable data supplied by:
CZA.EI
Explanation:
Error caused by a nonzero OS
count. and absence of foz·ward painter in
TBLOCK.
Reference Data (Also see Appendix 13-02.)
Requirement determined by: CZAEJ
Variab1e data supp1ied by:
CZAEJ
050503318
Explanation:
Error caused by number of volumes
exceeding 255 or by inability to obtain
storage.
Reference Data (Also see Appendix 8-02.)
Requirement determined by: CZAEI
Variable data supplied by: CZAEI
050503406
Explanation: E.t"ror caused by invalid TBLOCK
type.
Reference Data (Also see Appendix B-02_>
Requirement determined by: CZAEJ
Variable data supplied by:
CZAEJ
050503320
050503401
~lfEl-anation:
FIror caused by invalid return
code from ADOCAT.
Reference Data (Also see Appendix 13-02.)
Requirement. determined oy:
CZAEI
Variable dat.a supplied by: CZAEI
Explanation:
Error caused by return code of C
from FINDoS.
No space is allocated.
Reference Data (Also see Appendix B-02 .. )
Requirement determined by:
CZAEJ
variable data supplied by: CZAEJ
050503322
050503408
~lanation:
f:rror caused by an unsuccessful
ADDCAT but: wit.h an indicator showing that a
successful change of dsname has occurred in
the catalog or DSCB througr DELCAT or
HENAME.
Referenc~Data (I\lso see Appendix B-02.)
Requirement determined by:
CZAEI
Variab1e data supp1 ied by:
CZAEI
Explanation:
Error caused by invalid return
code from f'INDDS.
Refer~nce Data (Also see Appendix B-02.l
Requ irement determined by: CZAEJ
Variable data supplied by:
CZAEJ
050503409
0<,0503324
Explanation:
Error caused by invalid return
code from INDEX.
Reference Data (Also see Appendix 8-02.)
Requirement determined by:
CZI\EI
Variable data supplied by:
CZAEI
Explanat.ion:
Error caused by PINDOS not
finding JFCD created by DDEL
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZA&T
Variable data supplied by: CZAEJ
050503410
050503326
Explanation:
Error caused by invalid ret_urn
code from LOCATE or by a relative generation
number not being replaced l:y an absolute.
Reference Data (Also see Appendix 13-02.)
Requirement determined by:
CZAEI
Variable data supplied by:
CZAEI
050503401
~~lanation:
Error caused by return code X' 10'
from CHEKDS.
Reference Data (Also see Appendix 13-02.)
Requirement. determined by:
CZAE.J
Variable data supplied by:
CZA&J
4 ,.'>
Explanation:
Error caused by return from DDEF
with an invalid dsname code.
Reference Data (Also see Appendix 13-02.)
Requirement determined by:
CZAEJ
variable data supplied by:
CZAEJ
050503411
Explanation:
Error caused by M'I'REQ returning
with an unsuccessful return code.
Reference Data (Also see Appendix 13-02.)
Requirement. determined by:
CZAEJ
Variable data supplied by:
CZAEJ
050503412
Page of GC28-2037-7. Issued Sept. 30. 1972 by TNL GN28-3220
Explanation: Error caused by return from
SCRATCH with invalid return code.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEJ
Variable data supplied by: CZAEJ
Requirement determined by:
Variable data supplied by:
CZAEJ
CZAEJ
050503424
050503413
Explanation: Error caused by return from
LOCATE with invalid return code.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEJ
Variable data supplied by: CZAEJ
050503414
Explanation: Error caused by unsuccessful
return from DELCAT.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEJ
Variable data supplied by: CZAEJ
050503415
Explanation: Error caused by inability of
DELCAT to delete the DSD.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEJ
Variable data supplied by: CZAEJ
050503416
Explanation: Error caused by RELEASE not being
able to release JFCB from TOT.
Reference Data (Also see Appe nlix B-O 2. )
Requirement determined by: CZAEJ
Variable data supplied by: CZAEJ
050503418
Explanation: Error caused by CHEKDS finding
invalid member name.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEJ
Variable data supplied by:
CZAEJ
050503419
Explanation: Error caused by invalid return
code from STOW.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEJ
Variable data supplied by:
CZAEJ
Explanation: Error caused by validity bit in
JFCB not set -- MTREQ disabled.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEJ
Variable data supplied by: CZAEJ
050503426
Explanation: Error caused by invalid return
from RELEASE when trying to close DCBs.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEJ
Variable data supplied by: CZAEJ
050503427
Explanation: Error caused by invalid return
code from MSGWR.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEJ
variable data supplied by: CZAEJ
050503428
Explanation: Error caused by sharing indicator
but no sharing descriptor TBLOCK.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEJ
Variable data supplied by: CZAEJ
050503429
Explanation: Error caused by return code from
MTREQ indicating label error.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEJ
Variable data supplied by: CZAEJ
050503430
Explanation: Error caused by SYNAD exit.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEJ
Variable data supplied by: CZAEJ
050503431
050503420
Explanation: Error caused by invalid return
code from NEXTPAR.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEJ
variable data supplied by: CZAEJ
Explanation: Error caused by EODAD exit.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEJ
Variable data supplied by: CZAEJ
050503601
050503423
Explanation: Error caused by unknown TBLOCK
not TBD or TBC.
Reference Data (Also see Appendix B-02.)
Explanation: Error caused by invalid return
code from LOCATE.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEL. CZCLB
Variable data supplied by: CZAEL. CZCLB
Part II:
system Error Processor Messages
43
Page of GC28-2037-7, Issued Sept. 30. 1972 by TNL GN28-3220
050503702
Explanation: Error caused by invalid or
unexpected return code from SCAN routines.
Reference Oata (Also see Appendix B-02.)
Requirement determined by: CZAEM
Variable data supplied by:
CZAEM
050505703
Explanation: Error caused by invalid return
from either catalog service routine SHARE or
UNSHARE.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAFH
Variable data supplied by: CZAFH
050503703
Explanation: Error caused by unexpected return
code from SETL.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEM
Variable data supplied by: CZAEM
050505104
Explanation: Error caused by error return code
X'10' from catalog service routine SHARE.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAFH
Variable data supplied by:
CZAFH
050503704
Explanation: Error caused by invalidly set
swit.ch (CLASSW).
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAEM
Variable data supplied by: CZAEM
050505705
Explanation: Error caused by invalid return
code frOID NEXTPAR.
Reference Data (Also see Appendix 8-02.)
Requirement determined by: CZAFH
Variable data supplied by: CZAFH
050503706
Explanation: Error caused by invalidly set
switch (BEGSW).
Reference Dat,a (Also see Appendix B-02.)
Requirement. determined by: CUI,EM
Variable data supplied by:
CZAEM
050505106
Explanation: Error caused by invalid return
code from CHEKDS.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAFH
Variable data supplied by: CZAFH
0',0504502
Explanation:
Error caused by inval id return
codes frow called modules or by return codes
t:hat. shOUld not occur if CZADF is
functioning correctly.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZADF
Variable data supplied by: CZADF
050505800
Explanation: Error caused by invalid return
code from the catalog service routine
SHAREUP.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAFI
Variable data supplied by: CZAFI
0')0504504
050')0')801
ExPlanation: Error caused by return code from
DDEF that should not occur in this sequence.
Indicates a problem in routine CZADF or
CZAEA.
Refer-ence Datea (Also see Appendix 8-02.)
Requirement determined by: CZADF
variahle data supplied by: CZADF
050'';04505
~la~tion.£.
Error cause hy invalid return
code from CHKNUM and t_he presence of a zero
line number.
Reference Data (Also see Appendix B-02.)
---Requirement determined by: CZADF
variable dat.a supplied by:
CZADF
0';050')702
Explanation:
Error caused by owner ID not
being in catalog POD.
Reference Data (Also see Appendix 8-02.)
---Requirernent det.ermined by: CZAFl!
Variable data supplied by:
CZAFH
'14
Explanation:
Error caused by invalid return
code from NEXTPAR after scanning dsnamel
(user dsname)_
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAFI
variable data supplied by: CZAFI
050505802
Explanation: Error caused by invalid return
code from CHCRDS after scanning dsnamel
(u~jer
dsname) ..
Reference Data (Also see Appendix 8-02.)
Requirement determined by: CZAFI
Variable data supplied by:
CZAFI
05050580)
Explanation:
Error caused by invalid return
code from NEXTPAR after scanning owner ID.
Reference Dat.a (Also see Appendix B-02.)
--liequi rement determined by: CZAFI
Variable data supplied by:
CZAFI
Page of GC28-2037-7, Issuei Sept. 30, 1972 by TNL GN28-3220
050505804
Explanation: Error caused by invalid return
code from NEXTPAR after scanning dsname2
(owner dsname).
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAFI
Variable data supplied by: CZAFI
050505905
Explanation: Error caused by invalid
information from LOCATE.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAFJ
Variable data supplied by: CZAFJ
050505906
050505805
Explanation: Error caused by invalid return
code from CHEKDS after checking dsname2,
which is the owner's dsname.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAFI
Variable data supplied by: CZAFI
050505806
Explanation: Error caused by userid of user
issuing SHARE not being in catalog POD.
Reference Data (Also see Appendix B-02.>
Requirement determined by: CZAFI
Variable data supplied by: CZAFI
050505807
Explanation: Error caused by invalid return
code from ALFNUM after checking owner 10.
Reference Data (Also see Appendix B-02.>
Requirement determined by: CZAFI
Variable data supplied by: CZAFI
050505901
Explanation: Error caused by invalid
informaion from SCAN.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAFJ
Variable data supplied by: CZAFJ
050505902
Explanation: Error caused by a zero pointer to
the RESTBL for VAM, or DEB for SAM, data
sets said to be open. This pointer must be
set in JFCB of all open data sets. The
ddname is taken from the TDT, but is not
subsequently found.
Invalid information in
TDT.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAFJ
Variable data supplied by: CZAFJ
050505907
Explanation: Error caused by a missing DCB
header.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAFJ
Variable data supplied by: CZAFJ
050506201
Explanation:
Error caused by incorrect VAM
parameters in the DCB. An attempt was made
to read the USER table. An EODAD or SYNAD
exit was invoked but examination of DCBEX2
indicated an incorrect VAM parameter.
Reference data (Also see Appendix B-02.)
Requirement determined by: CZAFM
Variable data supplied by: CZAFM
050506207
Explanation: Error caused by an unsuccessful
attempt to create a JFCB for SYSULIB via
DDj,;F.
Explanation: Error caused by invalid
information from MSGWR.
Reference Data (Also see Appendix 8-02.)
Requirement determined by: CZAFJ
variable data supplied by: CZAFJ
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAFM
Variable data supplied by: CZAFM
050506208
050505903
Explanation:
Error caused by invalid
information from FINDDS.
Reference Data (Also see Appendix 8-02.>
Requirement determined by: CZAF,J
Variable data supplied by: CZAFJ
Explanation: Error caused by an error in
vrSAM. An attempt was made to write the
USER table, and a SYNAD exit was invoked.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAFM
Variable data supplied by: CZAFM
050506211
050505904
Explanation: Error caused by any invalid
return code from RELEASE. This module was
called to release the device associated with
a data set.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAFJ
Variable data supplied by: CZAFJ
Explanation: Error caused when no SYSOUT JFCB
can be found in the TDT chain.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAFM
Variable data supplied by: CZAFM
050506212
Part II:
System Error Processor Messages
45
Page of GC28-2037--?
Issued Sept.
30,
1972 by TNL GN2'l-3220
Minor syst.ern error caused by
error in RCR CLOSE macro inst.ruct.ion.
Task
is abnormally terminated.
Reff~rence Data (Also seE' Append ix B-O 2. )
Requirement determined by:
CZAF'M
Variable data supplied by:
CZAFM
!~xplanation:.
050506213
Explanati£ll: An invalid ret.urn code from RCR
OPEN caused a minor svstem errOr.
Upon
return from the slstefl entry processor, the
task is abnormally terminated.
Reference Data (Also see Appendix B-02.)
Requirement: determined by:
CZAF'M
Variable data supplied by:
CZAFM
050506305
Reference Data (Also see Appendix 8-02.)
Hequirement determined by: CZAFN
Variable data supplied by' CZ7\FN
050506701
Explanation:
Main Operator/Batch Mode ABEND in
pre-logon state.
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZACP
Variable data supplied by:
CZACP
050506702
Expalanat:ion,
Main Operator/Batch Mode ABEND
in post-logoff state.
Reference Data (Also see Appendix B-02_)
Requirement determined by:
CZACP
Variable data supplied by:
CZACP
§.~f'l~n~!:ion:
Error occurred because the userid
in TASK COMMON did not aqree wit.h the userid
in t.he syst.ern operator table (CHASOT).
Reference Data (Also see Appendix 8-02.)
- .. Requirement. det.ermined by:
CZAFN
Variable data supplied by:
CZAFN
050506306
Ex£!anation:.. Error occurred, caused by the
failure t.o include a cJFCB for SYSOUT.
This
was determined by a call to FINDJFCB.
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZAFN
Variable data 5uppliE'd by:
CZAFN
050506307
Explanation:
Error occurred beCau,je of an
error return code from RELEASE. indicat.ing
an unSuccessful attempt t.o release all.
Reference Data (Also see Appendix B-02.)
- ..- Reg\) irement determined by:
CZAFN
Variable data supplied by:
CZIH"N
050506103
Explanation:
ABEND was unable to change a
task's Schedule Table Entry to Level 21.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZACP
Variable dat.a supplied by:
CZACP
050506104
STOW of SYSCAT member during
ABEND failed.
Member interlock mi9ht be
left on.
Reference Data (Also see Appendix B-02.)
--Requirement det.ermined by:
CZACl'
Variable data supplied by:
CZACP
.~lanation:
050506701
Ex:e!.<."lnation:
ABEND in new task before SETAE
completed.
I
Requirement determined by: CZACP
Variable data supplied by: CZACP
050506140
050506131
Explanation: VSEND during ABEND to BM for
nonconversational tasks failed.
Reference Data (Also see Appendix B-02.>
Requirement determined by: CZACP
variable data supplied by: CZACP
050506732
Explanation: Close of SYSCAT data set during
ABEND failed.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZACP
Variable data supplied by: CZACP
050506733
Explanation: Close of SYSMLF data set during
ABEND failed.
Reference Data (Also see Appendix B-02.}
Requirement determined by: CZACP
Variable data supplied by: CZACP
050506734
Explanation: VAM interlocks release (CZCQQ2>
failed during ABEND.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZACP
variable data supplied by, CZACP
050506735
Explanation: ABEND was unable to close the
secondary SYSCAT DCB.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZACQ
Variable data supplied by:
N/A
050506737
Explanation: VSEND of 1 of 1 MCB to new task
created during ABEND failed.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZACP
Variable data supplied by: CZACP
050506738
Explanation: VSEND of 2 of 2 MeB to new task
created during ABEND failed.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZACP
Variable data supplied by: CZACP
050506139
Explanation: Recursive ABEND during scanning
of SDAT.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZACQ
Variable data supplied by: CZACQ
050506141
Explanation: SDAT entry lock not reset after
255 TSENDs in ABEND.
Reference Data (Also see Appendix B-02.>
Requirement determined by: CZACQ
Variable data supplied by: CZACQ
050506742
Explanation: SCRTSI during ABEND failed.
Reference Data (Also see Appendix B-02.>
Requirement determined by: CZACQ
Variable data supplied by: CZACQ
0505061113
Explanation: VSEND of 1 of 2 MCB to new task
created during ABEND failed.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZACQ
Variable data supplied by: CZACQ
050506144
Explanation: SETAE during ABEND to shift SYSIN
device for new task failed.
Reference Data (Also see Appendix B-02.>
Requirement determined by: CZACQ
variable data supplied by: CZACQ
050506145
Explanation: Other error conditions during
creation of new task during ABEND.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZACQ
variable data supplied by: CZACQ
050506746
Explanation: VSEND of reply to the new task
created during ABEND failed.
Reference Data (Also see Appendix B-02.>
Requirement determined by: CZACQ
Variable data supplied by: CZACQ
050506147
Explanation: Disconnect of VSS during ABEND
failed.
Reference Data (Also see Appendix B-02.)
Part II:
System Error Processor Messages
41
Page of GC28-20J7-1.
Issued sept.
Requirement determined by:
Variable data supplied by:
30.
1972 by TNL GN28-3220
B~ferpnce
~~ta OHso see Appendix B-02 .. )
Requir:ement determined by:
CZAr'S
Variable data supplied by:
CZAFS
CZACQ
CZACQ
OS0506?48
Explanation,- ABEND unable to n,lease a private
data set.
Reference Data (Also see Appendix B-02.l
Requirement determined by:
CZACQ
Variable data supplied by:
CZACQ
O'iO,}06808
Expianat.ion:
Error caused by an invalid return
code from CHERDS.
Reference Data (Also see Appendix B-02.1
Requirement determined by:
CZAFS
Variable data supplied by:
CZAFS
050506749
~lallati2!l:
l\BF~D was nnable teo clos(" USERI.IB
(SYSMLF)
Reference Data (A).so s€e Apppn,.'lix B-02.)
Requirement: det.ermined by:
CZACH
Variab1e data snppl i€d by:
N/A
050,}07001
Explanation:
Error caused by an invalid return
code from M'l'REQ.
!!c~fer~nce Dat~ {Also see Appendix B-02.}
Requirement determined by:
CZAFU
Variable data supplied by:
CZAFU
050506753
Explan~tion:
The UI~TSI procf";'; did not
complete properly.
A dump "lIould bE' t:aken,
since improperly deleted TSl's can be
dispatched causinq unpredictable results.
Dump real core and the task's virtual
memory.
Reference Data {Also see Appendix B-O 2.)
Requirement" determined by:
CZACQ
Variable data supplied by:
CZACQ
050507002
Explanation:
Error found in t.he command
received from batch monitor for a BULKIO
task.
Reference Data 0\1:;0 see Appendix B-02.)
Requir:ement detet:mined by:
CZAFU
Variable data supplied by:
CZAFU
O'JO,)07101
050506801
E~El,matio!!.:.
Error caused by an invalid
ret.urn code from NEXTPAR.
NEXT PAR is called
to scan input parameter string.
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZAFV
Variable data supplied by:
CZAFV
1.
Ji..lTlanat ion,Error caused by inval id return
code from NEXTPAH.
!!ceference Data (Also see Appendix B-02.)
Heguirement determined by:
CZAFS
Variable dat.a Ociupplied by:
CZAFS
E:~J..:'l_~ation!
A minor system error occurred,
causer! by an inval id field found in d ,J FCB
returned to CZAFV by FINDOS.
Upon return
from the systeln error I>rocessor, the ~ask is
abnormally terminated.
ReferencE' Data (Also see AppendiX 8-02.)
·-·~-Requiremellt determined by:
CZAFV
vaciable dat:a supplied by:
CZAFV
050506802
2.
.i'.l:SPlanatio'l.£
Error caused by an inval i d
delimiter code from NEXTPAR.
Reference Data (Also see Appendix 8-02.)
--Requiremeni:- determined by:
CZAF'S
Variable datd supplied by:
CZAr'S
0,)0,)07102
¥~lanatio~:_
Error caused by an invalid return
code from MSGWR.
Reference Data (A)so see Appendix 8-02.)
Requirement. determined by:
CZAFS
Variable dat:a supplied by:
CZAFS
·1.
J~lanation:
Error caused by an invalid return
code from MSGWR.
MSGWH is called to send
dnd receive messages from user.
Reference Data (Also see Appendix 8-02.)
·····--Requit:ement determined by:
CZAFV
Variable dat.a supplied by:
CZAFV
O,)0506B04
£[}.ana;:ion£" Error caused by an invalid return
code from ALFNUM.
Refet:ence Data (Also se.' Appendix 13-02.)
._.-. Requirement. determined by:
CZAFS
Variable d"La supplied by'
CZAFS
0,)()'JObB05
Lx.12!anat:ion,
Error caused by an invalid return
code fr:om FINDfXi.
48
2. £:.xplanat.ion:
A minor system ('rror occurred,
caused by an illogical ret.urn code from
13TOW.
STOW is called to update the POD of a
VPAM data spt.
Upon return from the system
error processor, the task is abnormally
Lerminated.
Reference Data (Also see Appendix B-02.)
- -Requirement det.ermined by:
CZAFV
Variable dat.a supplied by:
CZAf'V
0'iO'i07103
page of GC28-2037-?, Issued Sept. 30, 1972 by TNL GN28-3220
1. Explanation: Error caused by an invalid
delimiter code from NEXTPAR.
NEXTPAR was
called to scan input parameter string.
Reference Data (A1so see Appe mix B-O 2. )
Requirement determined by: CZAFV
Variable data supplied by: CZAFV
2. Explanation: A minor system error occurred,
caused by an illogical return code from
FIND. FIND was called to search for a
member in the POD of a VPAM DS.
Upon return
from the system error processor, the task is
abnormally terminated.
Reference Data (1\1so see Appendix B-02.)
Requirement determined by: CZAFV
Variable data supplied by:
CZAFV
file which is not open. On returning from
the system error processor, ABEND is invoked
with completion code = 02.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZATJ
Variable data supplied by: CZATJ
080102401
Explanation:
A SYNAD exit was taken while
to access SYSSVCT or an EODAD
exit was taken after an OPEN and SETL were
issued to USERCAT.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCFX
Variable data supplied by: CZCFX
attP~pting
050602501
Explanation: A SYNAD exit was taken while
attempting to write a reset User Table Entry
to SYSUSE.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAGB
Variable data supplied by:
CZAGB
050602502
Explanation:
While processing current CPU time
after an XTRTM macro, it was determined that
the magnitude of the value was greater than
allowed.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZAGB
Variable data supplied by:
CZAGB
080102402
Explanation: A user attempted to Logon, but
t:here was no space available in the SYSCAT
VM POD for the member. An attempt to
provide space by flushing inactive members
trom the POD was unsuccessful.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCFX
variable data supplied by: CZCFX
0801021;03
Explanation:
CZCFX received an unexpected
return code from DDEF.
Reference Dat.a (Also see Appendix B-02.)
Requirement determined by: CZCFX
variable data supplied by: CZCFX
050702701
Explanation: Error caused by MCB length
exceeding 200 bytes. The unavailability of
the SYSIN device during the initiation of a
nonconversational task.
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZAHC
Variable data supplied by:
CZAHC
052702701
Explanation: CZAWT cannot SIR the real
interval timer because it received a return
code other than 0 or 4 from SIR.
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZAWT
Variable data supplied by:
CZAWT
080102404
Explanation: CZCFX received an unexpected
return code from ADDDSCB for USERCAT.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCFX
Variable data supplied by: CZCFX
080102405
Explanation: CZCFX received an unexpected
return code from STOW.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCFX
Variable data supplied by: CZCFX
080102406
053202500
Explanation:
Parameter indicating type of GATE
operation desired is invalid. Valid GATE
type codes are 1-5 inclusi~.
Task is
abnormally terminated.
Reference Data
Requirement determined by:
CZATC
Variable data supplied by:
CZATC
053303001
Explanation:
Minor system error caused by a
request for a message from system message
Explanation:
No SYSCAT DSCB pointer could be
found in the JFCB.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCFX
Variable data supplied by: CZCFX
080102407
Explanation: CZCFX received an unexpected
return code from FIND.
Reference Data (Also see Appendix 8-02.)
Requirement determined by: CZCFX
Variable data supplied by: CZCFX
Part II:
system Error Processor Messages
49
Page of GC28-2031-7. Issued Sept. 30,
1972 by TNL GN28-3220
080102408
Explanation:
CZCFX received an unexpected
return code from RELEXPG.
feference Data (Also see Appendix B-02.)
Requirement determined by:
CZCFX
Variable data supplied by:
CZCFX
080102409
.Explanation: CZCFX received an unexpected
return code from DSCBREC.
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZCFX
Variable data supplied by:
CZCFX
080102410
EX121anation:
CZCFX received an unexpected
return code from RELEASE.
Reference Data (Also see Appendix B-02.)
Requirement. determined by:
CZCFX
Variable data supplied by:
CZCFX
080102506
Explanation:
LOCATE (CZCFL) attempted to close
a cat.alog member, but the CDSLOC flag in
catalog common area (CHACDS) was set
indicating that the cata10g was locked.
Reference Data (Also see Appendix B-02.>
Requirement determined by:
CZCFL
variable data supplied by:
N/A
Message residence:
CZCFL
Message issued by:
CZCFL
080102507
Explanation:
The first s-block does nat
contain user ID of a member after a
successful FIND; for example, an incorrect
data page was in the buffer returned to
LOCATE -- not the catalog page that was
expected.
This could indicate either a VAM
error or an erior in the POD of the catalog.
Reference Data (Also see Appendix B-02.)
Requirement. dete:rmined by:
CZCFL
Variable data supplied by:
CZCFL
080102501
Explanation:
The fully qualified name poinl:ed
to by word 1 of the input paramel:er list has
been detected to have an index name of more
than eight charact.ers.
Heien-'nce Data (Also see Appendix B-02.)
---Requirement determined by:
CZCFL
Variable data supplied by:
CZCFL
080102502
Explanat.iof!':' The generation number tormat is
checked for validity.
The following
condlLions will account for this message:
no digit. between parentheses; charact.er
following left_ parent.hes i s i s nat. decimal
cliqit., or plUS or minus sign; zero following
lefte parenthesis not followed by right
parent.hesis; no right parenthesis • .
Reference Dat.il (Also Sf'e Appendix B-O 2.)
·-Requiremerit: determined by:
C2CF'L
variable dat:a suppl ied by:
CZCF'L
080102')0)
~~lanation-=.
The opt.ion code specified in word
tewo of the input_ parameter is checked for
validity.
This message will occur if the
code i.e; found t.o be X' 00' or great.er than
X'14'. in a multiple of four.
Rpference Data (Also see Appendix B-02.)
Requirement. determined by:
CZCFL
Variable data supplied by:
CZCr'L
080 102')08
Explanation:
CZCFL received an error return
from FIND or STOW.
Reference Data (Also see Appendix B-02~.)
Requirement determined by:
CZCFL
variable data supplied by:
CZCFL
080102509
Explanation:
A read operation on SYSSVCT was
successful, but a SYNAD occurred when locate
attempted a write-replace operation to
update the record.
Reference Data (Also see Appendix 8-02.)
Requirement determined by:
CZCFL
Variable data supplied by:
N/A
080102701
Explanation:
A format error was found in the
fully qualified, III1-character data set name.
Completion Code:
01
Dump Code:
20
.!.'eference Data
Requirement determined by:
CZCFA1, CZCFA2
variable data supplied by:
CZCFA1, CZCFA2
Message residence:
CEAIS
Message issued by:
CEAIS
Destination:
operator's console
Transmi t~t.al technique:
SYSER
080102702
080102504
f:.~lanation:
.§.xp1",nat.i?_n:
The FIND macro has been used to
search a partitioned organization directory
to locate an eatery_
The ret.urn code
specifies that either the DCB is in use, or
the user ID length is incorrect.
Reference Dat.a (Al.5o see Appendix 13-02.)
--- Requirement determined by:
CZCFL
Variabl.e data supplied by:
CZCFL
50
CZCFA received an error return
from DELCAT or DELVAM while processing a VA~l
Data set.
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZCFA
Variable data supplied by:
CZCFA
080102703
Page of GC28-2037-7. Issued Sept. 30. 1972 by TNL GN28-3220
Explanation: GATWR error has occurred.
Completion Code: 01
Dump Code: 20
Reference Data
Requirement determined by: CZCFAl
Variable data supplied by: CZCFA1
Message residence: CEAIS
Message issued by: CEAIS
Destination: Operator's console
Transmittal technique: SYSER
080102704
Explanation: An error return has been detected
from DELCAT (CZCFD) or DELVAM (CZCFT).
completion Code:
01
Dump Code: 20
Reference Data
Requirement determined by: CZCFA 1, CZCFA2
Variable data supplied by: CZCFA1. CZCFA2
Message residence: CEAIS
Message issued by: CEAIS
Destination: Operator's console
Transmittal technique: SYSER
080102705
Explanation: CZCFA detected a format error in
a fully qualified name for a YAM Data Set.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCFA
Variable data supplied by: CZCFA
Message residence: CUIS
Message issued by: CUlS
Destination: Operator's console
Transmittal technique: SYSER
080102715
Explanation: An error was detected in the
update option code in word 2 of the
parameter list.
Completion Code: 01
Dump Code: 20
Reference Data
Requirement determined by: CZCFA2
Variable data supplied by: CZCFA2
Message residence: CEAIS
Message issued by: CEAlS
Destination: Operator's console
Transmittal technique: SYSER
080102802
Explanation: An attempt has been made to
create an index in the catalog. Any return
code other than successful completion is
invalid.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCFU
Variable data supplied by: CZCFU
08010320;
080102707
Explanation: Userid was not found in POD -determined by LOCATE.
Completion Code:
01
Dump Code: 20
Reference Data
Requirement determined by: CZCFA1, CZCFA2
Variable data supplied by: CZCFA2
Message residence: CEAIS
Message issued by: CEAIS
Destination: Operator's console
Transmittal technique: SYSER
080102708
Explanation: Error return greater than can be
expected from LOCATE, INDEX, or DELVAM.
Completion Code: 01
Dump Code: 20
Reference Data
Requirement determined by: CZCFA2
Variable data supplied by: CZCFA2
Message residence: CEAIS
Message issued by: CEAIS
Destination: operator's console
Transmittal technique: SYSER
Explanation: The input parameter indicating
the type of obtain request is invalid (not
O. 1, 2. 3, II, or 5).
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCFO
Variable data supplied by: CZCFO
080103202
Explanation: Error condition resulting from a
solid I/O failure in attempting to write a
DSCB.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCFO
Variable data supplied by: CZCFO
080103203
Explanation:
In attempting to write a DSCB or
data set label, a read back error was still
detected after 14 attempts.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCFO
Variable data supplied by: CZCFO
0801032011
080102713
Explanation: A nonzero return code wa3
received from ADDDSCB (CZCEK).
Completion Code: 01
Dump Code: 20
Reference Data
Requirement determined by: CZCFA2
Variable data supplied by: CZCFA2
Explanation:
In searching the SDAT table to
locate the device the SOA of which was
returned in the lORCB, a matching entry
cannot be found. A read operation was being
performed.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCFO
Variable data supplied by: CZCFO
Part II:
system Error Processor Messages
51
Page of GC28-20)?-1. Issued sept. 30.
1972 by TNL GN28-3220
080103205
Requirement determined by:
Variable data supplied by:
In searching the SDATtable t.o
locate the device the SDA of which was
returned in the IORCB, a ma.tching entry
cannot. be found.
A wri te operat.ion was
being performed.
Reference Dat.a (Also see Appendix 8-02.)
Requirement determined by: CZCf'O
Variable data supplied by:
CZCFO
CZCFH
CZCFH
.E;~lanat.ion:
080103301
.£:~Elanation:
An EODAD condition occurred when
a GET or PUT was issued on a catalog member.
Reference Oat.a (Also see Appendix B-02.)
-_. Requirement determined by: CZCFG
Variable data supplied by:
N/A
Message r'es idence:
CZCFG
Me",saqe issued by:
CZCFG
080103302
GETS BLOCK (CZCI"G4) called STOW to
close the catalog member, and a non-zero
return code was received.
Reference Data (Also see Appendix B-02.)
---Requirement determined by: CZCFG
variable data supplied by:
N/A
Message residence: CZCFG
Message is~;ued by: CZCFG
~Bc'lanation:
080103661
Explanation:
SEARCHSBLOCK (CZCFH) is unable to
add a page to the catalog, since the length
of the buffer (DHDMRL) is not equal to the
length of the catalog plus 4096 bytes.
Reference Data (Also see Appendix B-02.)
Requirement determined by, CZCFH
Variable data supplied by'
N/A
Message residence: CZCFH
Message issued by: CZCFH
080109901
£~Elanation'
This message is issued by the
Catalog Error processor (CZCFEl. A catalog
structure error has been encountered by one
of the catalog service routines. A detailed
message describing the type and location of
the error will be written on SYSLOG_
Reference Data (Also see Appendix B-02.)
~irement determined by:
~lodule calling
CZCFE (module name will appear in the
SYSLOG message)
Variable data supplied by:
N/A
080109902
080103303
~la!!atiQ'l:
A read or a wri t.e replace
operation on SYSSVCT resulted in a SYNAD
condition.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCFG
Variable data supplied by:
N/A
080Hl3401
NO mounted volume found in JFCB
specified in first word of input parameter
list. Task will terminate abnormally.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCFZ
Variable data supplied by:
CZCFZ
A system error condition has
occurred in one of the catalog service
routines.
As a I:esult., the Catalog Error
processor (CZCFE) was called, but the
parameter list to CZCFE does not have a
specific SYSER code.
Reference Data (Also see Appendix B-02.)
Requirement determined by: Module calling
CZCFE (module name will appear in the
ABEND message following this SYSER)
variable data supplied by:
N/A
~~anation:
ExE1~ation:
080103110 2
Explanation:
BUMP has been called in order to
dismount a specified privatee volume and
mount. anoteher volume in its place. Any
ret.urn code other than X' 00 '. indi eating
successfUL completion. is invalid. Task
will terminate abnormally.
Rc,ference Data (Also see Appendix B-02.)
·~uin'Cment. determined by:
CZCFZ
Variable dat.a suppl i ed by:
CZCFZ
080103601
f:!:'.Elanation:
An additional page would be
required teo contain the SBLOCK Which, if
added to the user's catalog. would cause t.he
maximum allowable number to be exceeded.
gef~rence~Da~ (Also see Appendix 8-02.)
52
080109903
Explanation:
A system error condition has
occurred in one of the catalog service
routines.
The Catalog Error processor
(CZCFEl was called, but the parameter list
to CZCFE does not contain a pointer to a
valid minor SYSER code.
This SYSER will be
claimed instead.
Reference Data (Also see Appendix B-02.)
Requirement determined by: Module calling
CZCFE (module name will appear in the
ABEND message following this SYSER)
Variable data supplied by:
N/A
080203101
Explanation:
SRCHSDST has sent LOADER LOGOFF' a
return code stating the data set does not
exist. The task continues normally.
Reference Data {Also see Appendix B-02.>
Requirement determined by:
CZCCD
Variable data supplied by: CZCCD
080302501
Page of
Explanation: NO mounted private volumes have
been found in the JFCB provided as input
parameter.
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZCEA
Variable data supplied by:
CZCEA
080302502
Explanation: The JFCB indicates that the
request is for a private volume. However
the SOA table indicates a public device.
~llocate will return to caller with return
code X'04'. indicating unsuccessful
completion of request.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCEA
Variable data supplied by: CZCEA
OB0302505
Explanation: An attempt to obtain available
DSCBS is unsuccessful due to either hardware
error. OSCB not found. or End of file mark
encountered. If the volume is private. a
return code of x'OS' is returned to the
caller. indicating an unrecoverable I/O
error. If the volume is public. the next
table entry is examined.
Reference Data (Also see AppE>ndix B-02.)
Requirement determined by, CZCEA
Variable data supplied by:
CZCEA
OS0302S01
Explanation: The secondary space allocation
field of the JFCB is zero, indicating that
zero space has been requested. Return is
made to caller with return code set to x'OB'
for private requests and X'12' for public
requests.
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZCEX
Variable data supplied by:
CZCEX
080302803
Explanation:
No mounted volumes are indicated
in the JFCB specified as an input parameter.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCEX
Variable data supplied by~
CZCEX
080302805
Explanation: An attempt to obtain available
DSCB has resulted in an error code
indicating DSCB not found, or end-of-file
mark encountered. Processing continues.
Reference Data (Also see Apperrlix B-02.)
Requirement determined by: CZCEX
Variable data supplied by::
CZCEX
GC28~2037-1.
Issued Sept. 30. 1912 by TNL GN2B-3220
Requirement determined by:
Variable data supplied by:
CZCEX
CZCEX
Explanation: A oseB has been obtained which
contains no extents. Subroutine terminates
with return code indicating request cannot
be met.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCEC
Variable data supplied by: CZCEC
080302901
Explanation:
An attempt has been made to
obtain a DSCB, subroutine ·obtain" return
code is invalid or indicates that the OSCB
record was not. found. or an end-of-file mark
was encountered. This subroutine will
return to its caller with a return code set
indicating that the request cannot be met on
this volume.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCEC
Variable data supplied by: CZCEC
080)02902
Explanation:
An attempt has been made to
r:etain a OSCB. Subroutine "retain" return
code is invalid. Subroutine will terminate
with return code indicating request cannot
be met
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCEC
Variable data supplied by: CZCEC
080302903
An attempt has been made to
obtain an available OSCB. Return code from
subroutine "obtain" indicates that DSCB was
not found.
subroutine terminates with
return code indicating request cannot be
met.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCEC
variable data supplied by: CZCEC
~lana.tion:
0803029011
Explanation: The primary or secondary
allocation field in the JFCB, as indicated
by the first word of the input parameter
list, contains an illvalid request size of
zero.
Reference Data (AIEO s'!e Appendix B-02.)
Requirement determined by: CZCEC
Variable data supplied by: CZCEC
080302905
OB0302807
Explanation:
Error issued when the routine is
unable to obtain the VTOC DSCB. Processing
continues.
Reference Data (Also see Appendix B-02.)
Explanation: The number of extents deleted
from the input DSCBs exceeds the current
specification of 25. This subroutine will
return to its caller with a return code set,
i.ndicating the request cannot be met on this
volume.
Part II:
system Error Processor Messages
53
Page of GC28-2037-7. Issued Sept. 30, 1972 by TNL GN28-3220
Reference Data (Also see Appendix 8-02.)
Requirement determined by:
CZCEC
Variable data supplied by:
CZCEC
080302906
Explanation: The relative track address of the
extent indicated by the DSCE that has been
obtained exceeds that of the original
relative track address. indicating that. the
required extent has been bypassed. This
subroutine will return to its caller with a
return code indicating the request. cannot be
met on this volume.
Referenc~Data (Also see Appendix B-02.)
ReqUirement determined by: CZCEC
Variable data supplied by'
CZCEC
080]02907
Explanation: No more extents are indicated in
the input DSCE while update entries are
still indicated to be processed. The
subroutine will terminate with a return code
indicating the request cannot be met.
RefereriCe Data (Also see Appendix B-02.)
Requirement determined by: CZCEC
Variable data supplied by:
CZCEC
080303104
Explanation:
A attempt to obtain a format-3
DseE has resulted in an error code
indicating OSCB not found.
Return is made
to caller with error code X'08',
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCEG
Variable data supplied by: CZCEG
080303202
Explanation: An attempt to replace a specified
private volume with another through BUMP has
been unsuccessful .•
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCES
variable data supplied by: CZCES
080303301
Explanation: An attempt to obtain (type 3) a
DSCB has resulted in an error code,
indicating DSCB nor found, or end-of-file
mark encountered.
Processing continues.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCEE
Variable data supplied by: CZCEE
080302908
Explanation: The output DSCB should be ready
to be retained.
However no DISC address has
been assigned to it: because more than 25
added extents caused too many output DSCBs
t.o be created from the same input [)sCB.
The
subroutine wil.l terminate with a return code
indicating the request cannot be met.
Reference Data (Also see Appendix 8-02.)
Requirement determined by:
CZCEC
Variable data supplied by:
CZCEC
080303302
Explanation:
An attempt to obtain an available
DSCB has resulted in an error code,
indicating DSCB not found. or end-of-file
mark encountered.
Processing continues.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCEE
Variable data supplied by: CZCEE
080303303
080302909
Explanation: A. DSCB has been obtained with no
extent indicating a hole between valid
extents in DSCB. Subroutine terminates with
a return code indicating request cannot be
met.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCEC
Variable data supplied by:
CZCEC
080.303101
Explanation: The volume flag of the indicated
JFCB contains a null indicator flag.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCEG
variable data supplied by:
CZCEG
080303103
Explanation: An at.tempt to obtain a format-l
DSCB has resulted in a return code
indicating DseB not found.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCEG
Variable data supplied by:
CZCEG
54
Explanation: An extent overlap is detected in
checking the extents provided by the
parameter list.
Processing continues.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCEE
variable data supplied by: CZCEE
080303304
Explanation:
Error detected in the DADSM hole
count.
Processing continues.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCEE
Variable data supplied by: CZCEE
080303305
Explanation:
Before attempting to obtain a
OSCB the VTOC hole count is detected to be
zero. Processing continues.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCEE
variable data supplied by:
CZCEE
080303406
Page of GC28-2037-7, Issued Sept.
Explanation: CZCEW detected an invalid DCB or
a missing DCBHDR.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCEW
variable data supplied by:
CZCEW
30~
1972 by TNL GN28-3220
Explanation:
Error encountered writing a DSCB
page via PGOUT.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCEF
variable data supplied by: CZCEF
08030390~
080303501
Explanation: VOLSRCH found no entries in the
public or private volume table.
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZCEH
Variable data supplied by:
CZCEH
Explanation: Owner ID not in the active user
list.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCEF
Variable data supplied by: CZCEF
080303905
080303701
Explanation:
An error was encountered while
attempting to write a PAT page via PGOUT.
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZCEL
Variable data supplied by:
CZCEL
Explanation: Unrecoverable CHECKSUM error
encountered on system data set.
Reference Data (Als'o see Appendix B-02.)
Requirement determined by: CZCEF
Variable data supplied by: CZCEF
08030~302
080303801
Explanation: Page number to be returned is too
large to exist on the indicated device.
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZCEN
Variable data supplied by:
CZCEN
Explanation: The volume label is read via
OBTAIN.
Valid device input is from the 2311
or 2314. Volume label indicates this device
as something else.
Dump Code:
20
Reference Data (Also see Appendix B-26.)
Requirement determined by: CZCEQ1
Variable data supplied by:
N/A
Message residence: CZCEQ1
080303802
Explanation: An apparently relocated page,
which is being returned, cannot be found in
the relocation entries.
Reference Data !Also see Appendix B-02.)
Requirement determined by: CZCEN
Variable data supplied by:
CZCEN
080303803
Explanation: Attempt made to ~eturn an
unassigned page.
Reference Data (Also see Appendix B-02.)
Requirement determined oy:
CZCEN
Variable data supplied by:
CZCEN
080303901
Explanation: An apparently relocated page
cannot be found among the relocation
entries.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCEF
Variable data supplied by:
CZCEF
080304303
Explanation: OBTAIN was called to read volume
label. A hardware error was detected by the
OBTAIN module (CZCFO); label not read.
Dump Code:
20
Reference Data (Also see Appendix B-26.)
Requirement determined by: CZCEQl
Variable data supplied by: N/A
Message residence: CZCEQ1
080304305
Exp!anation: During initialization of volume,
GETMAIN is called to request virtual memory
area to read PAT into. GETMAIN has returned
an E'rror indication that virtual memory
request cannot be fulfilled.
Dump Code:
20
Reference Data (Also see Appendix B-26.)
Requirement determined by: CZCEQ1
Variable data supplied by: N/A
Message residence: CZCEQl
080304306
080303902
Explanation: Error encountered writing a PAT
page via PGOUT.
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZCEP
Variable data supplied by:
CZCEF
080303903
Explanation: The desired SDAT appears to be
locked and is not being released.
Program
samples lock 100 times and does a TSEND each
time.
Dump Code:
20
Reference Data (Also see Appendix B-26.)
Requirement determined by: CZCEQl
Variable data supplied by:
N/A
Message residence:
CZCEQl
Part II:
System Error Processor Messages
55
Page of GC28-2037-7. Issued sept. 30, 1972 by TNL GN28-3220
080]09801
Explanation:
An invalid page assignment table
(PAT) page was found on the volume. The PA'l'
page will not be written.
Reference Data (Also see Appendix B-02.>
Requirement determined by:
CZCEM
Variable data supplied by:
CZCEM
Explanation:
Error caused by an invalid device
code.
Device is available. no volume is
found, and device code is neither tape nor
disk.
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZCAA
Variable data supplied by:
CZCAA
080502S011
080309901
Explanatio~:
Improper type code presented to
CZCF.J.
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZCE.J
Variable data supplied by:
N/A
Explanation:
Error caused by a task that is
searching request queue header for a
particular device code running out of
headers.
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZCAA
Variable data supplied by:
CZCAA
080309902
080S02S05
Explanat.ion:
'l'his task attempt.ed t.o reset a
lock not set by this task.
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZCE;J
Variable data supplied by:
N/A
080309903
Explanation:
'l'his task attempted t.O set too
many locks.
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZCE.J
Variable data supplied by:
N/A
080309904
Explanation:
This task tried t.o lock a private
device already locked by another task.
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZCE.J
Variable data supplied by:
N/A
080309905
EXQlanation:
An attempt was made t.o reset_ a
lock that has not been set.
Reference Data (Also see Appendix B-02.l
Requirement determined by:
CZCEJ
Variable data supplied by:
N/A
080)09906
l,xplanation:
The SDAT entry to be locked is
not within the range of the SDAT.
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZCEJ
Variable data supplied by:
N/l\
080309908
Explanation:
Unable to obtain error table
entry from CZACsl.
Reference Data {l\lso see Appendix B-02.}
Requirement determined by:
CZCEJ
variable data supplied by:
N/A
080502501
56
Explanation:
Error caused when the task is
removing a request from request queue and
finds that device codes for the device being
removed do not agree.
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZCAA
Variable data supplied by: CZCAA
080502506
Explanation:
Error caused by an invalid return
code from MSGWR.
Reference Data (Also see Appendix 8-02.>
Requirement determined by:
CZCAA
Variable data supplied by:
CZCAA
08050250\3
Explanation:
Error caused by a device type not
in the available table.
Reference Data (Also see Appendix B-02.>
Requirement determined by:
CZCAA
variable data supplied by:
CZCAA
080502509
Explanation:
All the locks set by mount
request (CZCAA) should have been cleared,
but. one or more have not been.
Reference Data (Also see Appendix B-02.l
Requirement determined by:
CZCAA
Variable data supplied by:
CZCAA
080502601
Explanation:
VMA is prevented from fulfilling
a request because some task limitation or
error has been detected; such as a privilege
Violation, an attempt to free or expand an
urhlssigned Qage. or a GETMAIN or EXPAND
request for more than 16 segments.
In
FREEMAIN this SYSER is followed by a return
to the caller with a return code of II.
In
other cases VMA calls ABEND with a
completion code of 01.
Reference Data (Also see Appendix B-02.l
Requirement determined by:
CZCGA
variable data supplied by:
CZCGA
Page of GC28-2031-7. Issued Sept. 30. 1972 by TNL GN28-3220
080502602
Explanation: VMA has been passed an invalid
parameter in a register or parameter list.
In FREEMAIN and DISCONNECT this SYSER is
followed by return to the caller with a
return code of 8. In other" cases the task
is abended with a completion code of 01.
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZCGA
Variable data supplied by:
CZCGA
080502603
Explanation: SMALL FREEMAIN has been requested
to release bytes which it has not assigned
or which have already been freed.
This
SYSER is always followed by a return to the
caller with a return code of 4.
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZCHA
Variable data supplied by:
CZCHA
080502804
Explanation: CZCAC specified an invalid
message length to the WTOA or WTOR routine.
(WTOA or WTOR gave a return code of X'OC' to
CZCAC.)
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCAC
Variable data supplied by: CZCAC
080502805
Explanation: CZCAC received an invalid return
code from the WTOA or WTOR routine.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCAC
Variable data supplied by: CZCAC
080502806
Explanation: CZCAD is exiting and not all
locks are reset.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCAD
Variable data supplied by: CZCAD
080502604
080502813
Explanation! SMALL VMA has detected: an
invalid parameter in a register; privilege
class or byte count in GET~~IN; byte count
or address in FREEMAIN. FREEMAIN returns to
the caller with a return code of 8; GETMAIN
calls ABEND with a completion code of 02.
Reference Data (Also see Apperdix B-02.>
Requirement determined by: CZCHA
Variable data supplied by:
CZCHA
080502800
Explanation: Error caused by an invalid return
code from PAUSE.
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZCAB
variable data supplied by:
CZCAB
080502801
Explanation:
Invalid return code from label
reader.
Reference Data (Also see Appendix 8-02.)
Requirement determined by:
CZCAB
Variable data supplied by:
CZCAB
080502802
Explanation:
Upon exit from CZCAB, all locks
were not unlocked.
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZCAB
variable data supplied by:
CZCAB
Explanation: CZCAB detected an invalid
Available Table Entry.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCAB
Variable data supplied by: CZCAB
080502901
Explanation: SECURE was unable to secure the
needed devices for a BULKIO task.
Completion Code: 01
Dump Code:
20
Reference Data
Requirement determined by: CZCAM
Variable data supplied by: CZCAM
Message residence: CEAIS
Message issued by: CEAIS
Destination: Operator's console
Transmittal technique: SYSER
080502902
Explanation: The number of VOlumes specified
in the JFCB is greater than the number of
valias actually there.
~ompletion Code:
01
Dump Code:
20
Reference Data
Requirement determined by: CZCAM
Variable data supplied by: CZCAM
Destination: Operator's console
Transmittal technique: SYSER
080502903
080502803
Explanation:
Upon exit from CZ.CAC, all locks
were not unlocked.
Reference Data (Also see Appendix B-02.)
Requirement determined by:
CZCAC
Variable data supplied by:
CZCAC
Explanation:
MTREQ returned an unmounted
volume.
Completion Code: 01
Dump Code:
20
Reference Data
Requirement determined by: CZCAM
Part II:
System Error Processor Messages
57
Page of GC28-2037-7. Issued Sept.• 30, 1972 by TNL GN28-3220
Variable data supplied by: CZClIM
Destination: Operator's console
Transmittal technique: SYSER
080502905
Explanation: A nonzero return code was
received from LOCATE.
completion Code:
01
Dump Code:
20
Reference Data
Requirement determined by: CZCAM
Variable data supplied by: CZCAM
Destination: Operator's console
Transmittal technique: SYSER
081302500
Explanation: Error caused by an I'PL interrupt
received while in recoverable data set
paging.
Reference Data (Also see Appendix B-02.)
RequireJl!ent determined by: CZCJT
Variable, data supplied by: CZCJT
081302502
Explanation: Program interrupt in privileged
state.
Interrupt code less than 32.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCJT or CZAMI
Variable data supplied by: CZCJT or CZAMI
081302503
080502909
Explanation: MTREQ returned null volume field.
Completion Code:
01
Dump Code:
20
Reference Data
Requirement determined by: CZCAM
Variable data supplied by:
CZCAM
Destination: Operator's console
Transmittal technique: SYSER
Explanation:
Third implicit dynamic linkage
request received and two already in
progress. An erro~ is causing the task
monitor to be recursive.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCJT
Variable data supplied by: CZCJT
081302504
080502910
Explanation: MTREQ returned an unmounted
volume.
Completion Code:
01
Dump Code:
20
Reference Data
Requirement determined by:
CZCAM
Variable data supplied by: CZCAM
Destination: operator's console
Transmittal t.echnique: SYSER
080502912
Explanation: The correct number of volumes was
not specified in the OSCB.
Completion Code:
01
Dump Code:
20
Reference Data
Requirement determined by: CZCAM
Variable data supplied by: CZCAM
Destination: Operator's console
Transmittal teChnique: SYSER
080902801
Explanation: CZATG received an error return
from RELEASE and issued a FINDJFCB, but the
JFCB could not be found.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZATG
Variable data supplied by:
CZATG
080902802
Explanation: After a good return from DDE.F a
FINDJFCB has not been successful.
Reference Data (Also see Apperrlix B-02.)
Requirement determined by: CZATG
Variable dat~ supplied by:
CZATG
58
Explanation:
Invalid SVC received in
privileged state.
Reference Data (Also see· Appendix B-02.)
Requirement determined by: CZCJT
Variable data supplied by: CZCJT
081302505
Explanation: Timer interrupt received with
invalid interrupt code (not 01 or 02).
Reference Data (Also see Appendix 8-02.>
Requirement determined by: CZCJT
variable data supplied by: CZCJT
081302506
Explanation:
Real time interrupt received, and
timer value returned does not match time
expected.
Reference Data (Also see Appendix B-02.l
Requirement determined by: CZCJT
Variable data supplied by: CZCJT
081302507
Explanation:
Task time interrupt received, and
accumulated task time returned does not
match time expected.
Reference Data (Also see Appendix B-02.l
Requirement determined by: CZCJT
variable data supplied by: CZCJT
081302508
Explanation:
Program interrupt code higher
than 32 in privilege state.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCJT
Variable data supplied by:
CZCJT
Page of GC28-2037-7, Issued Sept.• 30, 1972 by TNL GN28-3220
081302509
Explanation: Error caused by a data set paging
interrupt received while in data set paging.
Reference Data OUso see Appendix B-02.)
Requirement determined by: CZCJT
Variable data supplied by:
CZCJT
081302603
Explanation: Symbolic device address in VPSW
to an invalid entry in CHBSDA.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCJT
Variable data supplied by: CZCJT
0813026011
081302510
Explanation: IORCB has an incorrect pointer to
the posting routine.
Reference Data (Also see Apperdix B-02.)
Requirement determined by: CZCJT
Variable data supplied by: CZCJT
Explanation: The clocks were improperly
chained.
Reference Data (Also see Appendix B-01.)
Requirement determined by: CZCJY
Variable data supplied by: N/A
081302701
081302601
Explanation: Invalid queue index passed as
parameter.
Reference Data (Also see Appendix 8-02.)
Requirement determined by: CZCJT
Variable data supplied by: CZCJT
Explanation: Invalid LVPRV call. Enter flag
not on, or nonprivileged program issued
LVPRV.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCJL
Variable data supplied by: CZCJL
081302801
081302602
Explanation: Timer interrupt received, but no
REQUEST ENTRY found.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCJT
Variable data supplied by: CZCJT
Explanation:
Privileged current active request
entry with entry point 1 or COM area pointer
equal to zero.
Reference Data (Also see Appendix B-02.)
Requirement determined by: CZCJT
Variable data supplied by: CZCJT
Part II:
System Error Processor Messages
59
Page of GC2B-2037-7, Issued Sept. 30, 1972 by TNL GN28-3220
PART III:
SECTION 1:
ABNORMAL TASK TERMINA1ION MESSAGES
ABEND PROCEDURE
Messages produced by the ABEND procedure inform
the user of abnormal termination of his task. The
ABEND routine, CZACP. is invoked upon detection of
an uncorrectable error in the system or in a problem program. On being called, the ABEND procedure
issues a message provided by the calling routine
to specify the cause of the abnormal termination
to the task's SYSOUT.
The ABEND procedure is implemented by several
privileged service routines. which are a part of
initial virtual memory_ The procedure distinguishes between two error conditions, one resulting in abnormal termination of the user's task.
and the other in its abortion. The former allows
the user to direct the orderly termination of his
task; the latter does not. The conditions are
identified by the completion code passed by the
calling routine.
ABNORMALLY TERMINATING THE TASK
The abnormal termination, Or ABEND. error condi t.ion is indicated by a completion code of 1.
which is declared for conditions in user programs
for which it should be possible for the user to
remove the cause of error or, if he cannot do
this, to direct the termination of his task.
Hence, when an ABEND error condition arises. the
logical task sequence is halted at the point where
t.he condition was detected and control is returned
t.O the user.
If the task. is being executed in conversational
mode, the calling routine's message is issued at
the user's terminal with a message requesting the
user to release all unneeded data sets, to use PCS
corrunands to obtain debugging information, and to
log off the task if the error cannot be corrected.
If the user elects to log off, control is returned
to t.he task monitor.
If the task is being executed in nonconversational mode, after issuing the calling routine's
message to the task"s SYSOUT the ABEND procedure
has two courses of action.
If the specified data
set contains commands to be executed when a
completion-code-l-type error occurs, this data
set, which must have the ddname TSKABEND, is made
the SYSIN dat.a set. Subsequent processing continues. utilizing the commands in this data set: t_o
obtain orderly termination of the task.
If no
such data set was specified, the LOGOFF command is
called to terminate the task.
Should a second call to the ABEND procedure
take place while a completion-code-l-type error is
being processed, the abnormal t.ermination proce-
60
dure becomes a condition-code-2, or abort, type
error.
ABORTING THE TASK
The abort error condition is indicated by a
completion code of 2, which is declared either for
a system error -- which the user. of course. cannot correct -- or for recurring completion-code-ltype conditions. As a result, the logical task
sequence is halted at the point at which the condition was detected. and the system attempts to
terminate the task in an orderly fashion.
In the
case of recurrent calls to the ABEND procedure,
the termination phase in which the error was
detected (such as the clOSing of a data set) is
abandoned, and the system proceeds to the next
phase.
Unlike the procedure for a completion-code-1type error, control is never returned to the user.
Instead, after the calling routine's message is
issued to the task's SYSOUT (regardless of the
mode in which the task is being executed>, all
data sets are closed, all uncataloged data sets
erased, all private devices released, and all
shared modules unlinked. Then the LOGOFF command
is issued. Control is then passed to the task
monitor and from there to the director.
completion code 3 provides for aborting a task
in the same manner as completion code 2. For completion code 3 no new task is created.
ORGANIZATION
Section 2 of this part is a glossary of the
messages that can be passed to the ABEND procedure
for issuance to the task's SYSOUT. The glossary
also contains the cause and other related data for
each message.
The messages are arranged in
collating sequence beginning with the first alphabetic character as the message is read from left
to right; numbers and special characters to the
left of the first alphabetic character are
ignored, while those to its right are taken into
consideration when this becomes necessary for the
collation of t.he message.
Note: Unless otherwise noted within the explanation of the message, the following applies to each
message in this section:
Conversational Action
User:
N/A
System:
N/A
Nonconversational Action
User: N/A
System:
N/A
Technical Newsletter
File
~umber
S360-20
Base Publication No.
This Newsletter No.
Date
GC28-2037-7
GN28-3220
September 30, 1972
Previous Newsletters
GN28-3209
IBM System/360 Time Sharing System
System Messages
ol8M corp. 1967, 1968, 1969, 1970, 1971
This Technical Newsletter provides replacement pages for the
subject publication. Pages to be inserted and/or removed are:
iii
5-60
61-66
(deleted)
143-146.1
373-374.1
435-438.1
Summary of Amendments
The entire section of SYSERR messages has been replaced.
Documentation has been added for several previously undocumented General Task Completion messages.
IBM Corporation, Dept. 80M, 1133 Westchester Ave., White Plains, N.Y.
PR'~TED
,~
USA
SECTION 2:
ABEND MACRO MESSAGES
ABEND BY BSAM POSTING-CATASTROPHIC I/O ERROR
Explanation: SAM posting has discovered an I/O
error that prevents the task from
continuing.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCRB or CZCRC
variable data supplied by:
N/A
Message residence: CZCRB and CZCRC
ABENL-CZCOJ10S - UNSUCCESSFUL STOW OF OLD MEMBER
ASSIGNED TO DCB
Explanation: An unsuccessful return was
received from CZCOK in an attempt to stow a
rr,ember that was opened due to a previous
find operation.
Completion Code: 02
Reference Data (Also see Appendix B-03.>
Requirement determined by: CZCOJ
Variable data supplied by: N/A
Message residence: CZCOJ
ABENL-CZCOJ106 - PROTECTION CLASS OF DCB AND USER
AREA INCOMPATIBLE
ABEND-CZCOJ10A- ERROR RETURNED FROM VAM SEARCH
SDST ROUTINE
Explanation: Invalid return code received from
CZCQE.
completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCOJ
Variable data supplied by:
N/A
Message residence:
CZCOJ
Explanation: A nonprivileged program is
attempting to use privileged virtual memory
for a DCB.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCOJ
Variable data supplied by: N/A
Message residence: CZCOJ
ABENB-CZCOJ109 - DCB HDR NOT LINKED TO MEMBER HDR
ABEND-CZCOJ101 - DCB HEADER DOES NOT POINT TO DCB
Explanation: The DCB pointer :in the DCB header
does not point to the DCB.
Completion Code: 02
Beference Data (Also see Appendix B-03.)
Requirement determined by: CZCOJ
Variable data supplied by:
N/A
Message residence: CZCOJ
ABENJ)-CZCOJ102 - RESTBL FOR SHAREL DATA SET
REQUIRES EXPANSION
Explanation: The RESTBL cannot be expanded if
the data set is shared.
Completion Cede:
02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCOJ
Variable data supplied by: N/A
Message residence: CZCOJ
ABEND-CZCOJ103 - DSORG NOT VALID FOR PARTITIONED
DATA SEl
Explanation: 'I'he data set orga::lization type is
invalid for a partitioned data set.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCOJ
Variable data supplied by: N/A
Message residence: CZCOJ
ABEND-CZCOJ104 - UNABLE TO SETL TO INDEX SEQ
MEMBER
Explanation: An unsuccessful return code was
received from CZCPC (SETL).
Completion Code:
02
Reference Data (Also see Ar;pendix B-03.)
Requirement determined by: CZCCJ
Variable data supplied by: N/A
Message residence: CZCOJ
Explanation: The member header link in the J)CB
header is zero or is not equal to the field
J)HDRES in the DCB header.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCOJ
Variable data supplied by: N/A
~iessage residence:
CZCOJ
ABENr-CZCOK101 - DCB HDR DOES NOT POINT TO DCB
Explanation: The DCB pointer in the DCB header
does net point to the DCB.
CcmFletion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCOK
Variable data supplied by: N/A
Message residence: CZCOK
ABEN:C-CZCOK102 - DSORG IN DCB NOT VALID FOR
PARTITIONED
Explanation: The data set organization type in
the DCB is not valid for a partitioned data
set.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCOK
Variable data supplied by: N/A
Message residence: CZCOK
ABEND-CZCOK103 - ILLEGAL DSORG FOR REQUESTED STOW
Explanation: The data set organization type in
the DCB is not valid for a stow into a
partitioned data set.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCOK
Variable data supplied by: N/A
Part. III:
Abnormal Task Termination Messages
67
Message residence:
CZCOK
ABEND-CZCOK104 - TYPE R STOW AND
FOUND IN POD
Variable data supplied by:
MEssage residence: CZCOK
~EMBER
N/A
NAME NOT
Explanation: A type-R stow was issued to
replace the user dat.a of an existing member,
hut that: ITlember was not in the VPAM data
set..
Completion Code:
02
Reference Data (Also see Appendix B-03.)
.
Requirement determined by: CZCOK
Variable data supplied cy: N/A
Message residence: CZCOK
ABENr-CZCOKI10 - POD AND RESTBL DATA PAGE COUNTS
ARE NOT EQUAL
Explanation: Contradictory data page counts
exist.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCOK
Variable data supplied by: N/A
Message r esiderlce: C"-COh
ABEND-CZCOKI05 - OTHER THAN TYPE-R STOW AND DCB
OPENED FOR INPUT ONLY ON SHARED DATA SET
Explanation: Only type-R sto~ is permitted on
a shared data set opened for input.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCOK
Variable data supplied by: N/A
Message residence: CZCOK
ABEND-CZCOKll1 - ERROR CODE RETURNED FROM.VPAM
SEARCH
Explanation: An unexpected return code was
received.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCOK
Variable data supplied by: N/A
Message residence: CZCOK
ABEND-CZCOKI06 - AREA SPECIFIED FOR 'rYPE R STOW
OPENED FOR INPUT ONLY
Explanatlon:
A type-R stow is not valid if t.he
data set is opened for input only. since a
type-R stow will modify the user data
associated with the member.
Completion Code:
02
Reference Data (Also see Appendix B-03.)
Requirement. determined by: CZCOK
Variable data supplied by: N/A
Nessage residence:
CZCOK
ABEND-CZCOKI07 - ERROR CODE RETURNED .FROM VAN
HECLAI.M
Explanation:
An unexpected error return code
WdS received.
Completion Code:
02
Reference Data (Also see Appendix B-03.)
Requi rement det.ermined ry:
CZCOK
Variable data supplied by: N/A
Message residence:
CZCOK
ABEND-CZCOK108 - ERROR CODE RETURNED FROM VAM
RECLAItJ!
An unexpected error return code
was received.
Completion Code:
02
Reference Data (Also see Append.ix B-03.)
Regui remerrt determined .ty: CZCOK
Val-iable data supplied by: N/A
Message residence: CZCOK
~lanat.i2n:_
ABENC-CZCOK112 - DCB OPEN OPTION NOT VALID FOR
REQUESTED STOW
Explanation: 'I'he type of stow requested is not
compatible with the open option specified at
the time the data set was opened.
Completion Code:
02
Reference Data (Also see Appendix B-03.)
Requirement determined by:
CZCOK
Variable data supplied by: N/A
Message residence: CZCOK
ABEND-CZCOK113 - MEMBER CHECKED OUT BY ANOTHER DCB
Explanation: See message text.
comFletion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCOK
Variable data supplied by:
N/A
Message residence: CZCOK
ABENI:-CZCOK114 - ERROR CODE RETURNED FROM SEARCH
SDST
Explanation: See message text.
Ccmyletion Code:
02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCOK
Variable data supplied by: N/A
Message residence: CZCOK
ABEND-CZCOM10l - POD FOR SHARED DATA SET REQUIRES
EXPANSION
ABEND-CZCOK109 -- POD AND RESTBL DATA PAGE COUNTERS
ARE NOT EQUAI"
Contradictory data page counts
exist.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCOK
f:~'planati..qn:
68
Explanation: The POD of a shared data set
cannot be expa nded.
Corn[letion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCOM
Variable data supplied by: N/A
Message residence: CZCOM
ABEND-CZCOMI02 - ERROR INSERTING PAGE ENTRY FOR
POD IN RESTBL
Explanation: An error return was received from
CZCOF.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCOM
Variable data supplied by: N/A
Message residence: CZCOM
ABEND-CZCOM103 - POD PAGE COUNTERS IN POD AND
RESTBL ARE UNEQUAL
Explanation: Contradictory POD page counts
exist.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCOM
Variable data supplied by: N/A
Message residence: CZCOM
ADDRESS OF GATE TYPE READ-RESTRICTED OR NOT
ASSIGNED TO YOUR VM.
Explanation: GATE (CZATC) has determined that
the job parameter it was passed does not
contain a valid address assigned to the
current task's virtual memory that GATE can
use to fetch the GATE type requested.
Completion Code; 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: eZATC
Variable data supplied by: N/A
Message residence: CZATC
ATTEMPT TO GET ZERO LENGTH RECORD
Explanation; A GET was attempted for a record
with a length of zero.
Zero length records
are invalid.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCOR
Variable data supplied by:
N/A
Message residence: CZCOR
ABEND-CZCOMl04 - MAXIMUM DATA SET SIZE IS EXCEEDED
ATTEMPT TO PUTX WITHOUT FIRST EXECUTING LOCATE GET
Explanation: The size of the data set has
reached a maximum.
Completion Code:
02
Reference Data (Also see Appendix B-03.)
Requirement determined by: ClCOM
Variable data supplied by: N/A
Message residence: ClCOM
ABNOR~~L
Explanation: A locate-mode GET n,ust be issued
to locate the record prior to replacing the
record with a PUTX.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCOU
Variable data supplied by: N/A
Message residence: CZCOU
RC FROM FIND
Explanation: Abnormal return code received
from FIND macro.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CFADA
Variable data supplied by:
N/A
Message residence: CFADA
ACCESS IS QSAM AND DCE OPEN
Explanation: See message text.
Completion Code: 01
Reference Data (1\lso see Appendix B-03.)
Requirement determined by: CZCNB
Variable data supplied by: N/A
Message residence: CZCNB
ACCESS IS R/O BUT OPEN OPTION IS NOT INPUT
bxplanation: See message text.
Conpletion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by:
CZCLA
Variable data supplied by: N/A
Message residence: CZCLA
ACCESS METHOD NOT FOUND
Explanation: DCB access method is not .known.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCLA
Variable data supplied by: N/A
Message residence: CZCLA
ATTEMPT TO SETL OUTSIDE LIMITS OF DATA SET
Explanation: It is not valid to SETL befcre
the beginning or beyond the end of the data
set.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by; CZCOT
Variable data supplied by: N/A
Message residence: CZCOT
A'ITEMPTED EODAD - NO VCON ADDRESS IN DCB
Explanation: The end-of-data-set exit was
attenpted, but no VCON address was in the
DCE. Trying to get a record when positioned
to the end of the data set.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: ClCPB
Variable data supplied by: N/A
Message residence: CZCPB
ATTEMPTING TO ADD A DIRECTORY PAGE BEYOND MAXIMUM
256
Explanation: In building a data set an attempt
is being made to add a directory page, which
brings the total number in excess of system
Linits (256).
Comf1etion Code:
02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCPL
Variable data supplied by: N/A
Message residence: ClCPL
Part III:
Abnormal Task 1'erminaticn Messages
69
BLOCK DESCRIPTOR INVALID
The LL field for the block is
less than the total number of LL fields for
each logical record.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCRA
Variable data supplied by: N/A
Message residence:
CZCRA
.Explanation~
BLOCK SIZ E AND I,OGICAL RECORD LENGTH SPECIFIED AS
ZERO
Explanation: After the system subroutine which
opens the appropriate device type, a check
of the block size of the records, as
specified in the data control block, is
made.
If blocking is not specified, and the
block size and logical record length are
both zero, this error condition occurs.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCWO
Variable data supplied by: N/A
Message residence:
CZCWO
BLOCK SIZE WAS NOT SPECIFIED FOR BLOCKED RECORDS.
See message text.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCWO
Variable data supplied by:
N/A
Message residence:
CZCWO
~xplanation:
BRANCH ARRAY R2 VALUE GREATER THAN 48
Explanation: See message text.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCTA
Variable data supplied by: N/A
Message residence: CZCTA
BSAM I/O NOT COMPLETE
Expl~1ation:
See message text.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCLD
Variable data supplied by: N/A
Message residence:
CZCLD
Requirement determined by:
Variable data supplied by:
Message residence: CZCMB
BUFFER PAGE LIST ADDRESS IS
NO'!'
CZCMB
N/A
IN DCB
Explanation: See message text.
completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCNA
Variable data supplied by:
N/A
Message residence:
CZCNA
CASE SW INVLD
Explanation: Indicator in PSECT of GETLINE is
set incorrectly. showing that PSECT has been
erroneously destroyed.
(This is a
self-checking and debugging aid.>
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CFADB
Variable data supplied by: N/A
Message residence: CFADB
CATALOG RC NOT ZERO
Explanation: This abnormal task termination is
the consequence of a system error. A return
code other than zero was received from
CATALOG.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CFADA
Variable data supplied by: N/A
Message residence: CFADA
CC OTHER THAN 0 FROM DEL CAT - CZCFDl
Explanation:
DELCAT was unable to delete the
data set's catalog entry from the catalog.
Message preceded by minor software SYSER
080304004.
Completion Code: 01
Reference Data
Requirement determined by: CZCFT
Variable data supplied by: N/A
Message residence: CZCFT
Message issued by: CZACP
Destination
Conversational: User's terminal
Nonconversational: SYSOUT
Transmittal technique: ABEND
BUFFER IS NOT IN USE
CC OTHER THAN 0 FROM RELEASE
Explanation:
See message text.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCNA
Variable data supplied by: N/A
Message residence:
CZCNA
BUFFER LENGTH .IS TOO BIG
Explanation: See message text.
Cornplet.ion Code: 01
Reference Data (Also see Appendix B-03.)
70
Explanation: RELEASE was unable to free up the
requested device. Message preceded by minor
software SYSER 080304003.
Completion code~ 01
Reference Data
Requirement determined by: CZCFT
Variable data supplied by: N/A
Message residence:
CZCFT
Message issued by: CZACP
Destination
Conversational: User's terminal
Nonconversational: SYSOUT
Transmittal technique: ABEND
CC OTHER THAN 0 FROM RELEXPG
Explanation: RELEXPG was unable to free up all
the pages of the data set to be erased.
Message preceded by minor software SYSER
080304008.
Completion Code: 01
Reference Data
Requirement determined by: CZCFT
Variable data sUPFlied by:
N/A
Message residence:
CZCFT
Message issued by: CZACP
Destination
Conversational: User's terminal
Nonconversational: SYSOUT
Transmittal technique: ABEND
Explanation: See message text.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCMA
Variable data supplied by: N/A
Message residence: czeMA
CECMA05 -
ATTE~PT
TO USE DCB WHICH IS NOT OPENED
Explanation: See message text.
Ccmpletion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCMA
Variable data supplied by: N/A
Message residence: CZCMA
CECMA06 - BUFFER LENGTH GREATER THAN 32,768
CCW SPECIFICATION ERROR
The I/O superviso:t" has detected
an error in a CCW passed to i t by an OLTS
module. The offending program should be
removed, and the task restarted.
completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZATB
Variable data sUFplied ty:
N/A
Message residence: CZATB
Explanation:
CEAFM - LOGON TERMINATED DUE TO SHUTDCWN.
Explanation: An attempt was made to log on
while shutdown was in progress.
Co~pletion Cede:
03
Reference Data (Also see ApFendix 8-03.)
Requirement determined ty: CZAFM
Variable data supplied by: N/A
Message residence: CZAFM
Explanation: See message text.
Ccmpletion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCMA
Variable data supplied by: N/A
Message residence: CZCMA
CECMA07 - BLOCKSIZE PLUS KEYLEN GREATER THAN
32,768
Explanation: See message text.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCMA
Variable data supplied by: N/A
Message residence: CZCMA
CECMA08 - DSORG IS NOT SAM, TAM OR IOREQ
Explanation: See message text.
Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCMA
Variable data supplied by: N/A
Message residence: CZCMA
Ccm~letion
CECMA01 - BLOCKSIZE GREATER THAN 32,768
Explanation: See rr,essage text.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCMA
Variable data sUFplied by: N/A
Message residence: CZCMA
CECM~02
- BUFFER LENGTH AND BLOCK SIZE EQUAL ZERO
Explanation: See rr,essage text.
Corrpletion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZC~ill
Variable data supplied J:y:
N/A
Message residence: CZCMA
CECMC - LCB AND SDAT DEVICE OPTIONS INCONSISTENT
Explanation: The DCB device field (DCBDEV) and
the SDAT device field (SDADEC) do not
reflect the same device.
Completlon Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCMC
Variable data supplied by: N/A
!>',€ssage residence: CZCMC
CECMe - DCB LEVICE AND DCB MACRO OPTIONS
INCONSli3TENT
CECMA03 - BUFFER NUMBER EQUAL TO ZERO
If the DCB device field (DCEDEV)
specifies a reader, the DCB macro field
(DCBJ~ACRF) must specify GET.
If the DCB
device field {DCBDEV} specifies a printer or
punch. the DCB macro field (DCBMACRF) must
specify PUT. Any other combinations are
invalid.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Heguirement determined by: CZCMC
~xplanation:
Explanation: See message text.
Corrpletion Code: 01
Reference Data (Also see AFFendix B-03.)
Requirement determined by:
CZC~A
Variable data supplied by: N/A
Message residence: CZC~A
CECMA04 - INVALID DCBID IN DCB
Part III:
Abnormal Task Termination Messages
71
Variable data supplied by:
Message residence: CZC~C
N/A
Variable data supplied by:
Message residence: CZCMC
CECMC - DeB DEVICE AND DCB OPEN OPTIONS
INCONSISTENT
Explanation:
If the DCB device field (DCBDEV)
specifies a reader, the DCB open option must
specify input.
If the LCE device field
(DCBDEV) specifies a printer or punch, the
DCE open option must specify output. Any
other combinations are invalid.
completion Code:
01
Reference Data (Also see Appendix £-03.)
Requirement determined by: CZCMC
Variable data supplied by: N/A
Message residence:
CZCl',C
CECMC - DCB DEVICE OPTION MUST SPECIFY PUNCH WHEN
DCB COMBINE FLAG IS SET
Explanation:. The DCB combine flag is on, but
the DCB device field (DCBDEV) does not
£;pecify a punch as required.
Completcion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCMC
Variable data supplied by: N/A
Message residence: CZCMC
CECMC - DCB RECORD FORMAT INVALID FOR
MS~j
Explanation: The DCB record format field
(DCBRECFM) specifies a record format other
than U'IV} fBJ (AIM). MSAM will not support
any formats other than these.
Completion code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCMC
Variable data supplied by: N/A
Message residence: CZCMC
CEC1'1C - DeB RECORD .LENGTH OPTION NOT SET OR
INCONSISTENT WITH DCB DEVICE OPTION
Explanation:. This afplies only to fixed length
records. The logical record length is not
set (DCBLRECL=O) or is larger than the
allowed maximum for the given device and
record format (aO for EBCDIC on reader or
punch, 160 for column binary on reader or
punch, 132 for printer, with 1 additional
for control character on funch and printer).
completion Code:
01
Reference Dat.a (Also see Afpendix B-03.)
Requirement determined by: CZC?lC
Variable data supplied by: N/A
J.lessage residence:
CZCMC
CECMC -
INVALID CKCLS RETURN CODE
Explanation:
Processing is continuing
following a system error 041202501 caused by
an invalid return code from the CKCLS macro.
JI'ISAM OPEN calls for abnormal termination of
the task following a system error dump.
completion Code:
01
Reference Da·ta (Also see Afpendix B-03.)
---Requirement determined by: CZCMC
72
N/A
CECMC - SDAT DEVICE OPTION INVALID FOR MSAM
Explanation: The SDAT device fields SDADEA and
SDADEB speoify a device type other than unit
record. MSAM only supports unit record
devices.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCMC
Variable data supplied by: N/A
Message residence: CZCMC
CECMC - VARIABLE RECORDS NOT SUPPORTED BY CARD
READER
Explanation: The DCB record format (DCBRECFM)
specifies variable-length records whereas
the DCB device field (DCBDEV) specifies a
card reader. MSAM only supports
fixed-length records on a card reader.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Hequirem€nt determined by:
CZCMC
Variable data supplied by: N/A
i"essage residence: CZCMC
CECML - AT LEAST 3 BUFFERS ARE REQUIRED FOR
FORM-SENSITIVE PRINTING
Explanation: The DCB formtype field (DCBFRMTP)
specifies form-sensitive printing, but the
number of buffers (SDAMRB) is less than 3,
so a whole page image cannot be contained in
the buffer space provided.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by:
CZCMD
Variable data supplied by: N/A
Message residence:
CZCMD
CECMD - CONTROl. CHARACTERS ARE REQUIRED FOR
FORM-SENSITIVE AND SEQUENCE-SENSITIVE PRINTING
&Xflanation: The DCB formtype field (DCBFRMTP)
specifies form-sensitive printing, but the
DCE record format field (DCBRECFM) does not
specify USASI or machine control oharacters.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCMD
Variable data supplied by:
N/A
Message residence: CZCMD
CECMI: - ERROR RETURN CODE RECEIVED FROM A MACRO
Explanation:
Processing is continuing,
following a system error 041202601 to
041202603 caused by an error return code
from the WTO, SIR, or DIR Hacros. SETUR
calls for abnonnal termination of the task
following a system error dump.
Completion Code:
01
Reference Data (Also see Appendix 13-03.)
Requirement determined by: CZCMD
Variable data supplied by: N/A
Message residence: CZCMD
Page of GC2S-2037-7, Issued February 1, 1972 by TNL GN2S-3209
Requirement determined by:
Variable data supplied by:
Message residence: CZCMD
HAS NOT BEEN OPENEl) PRIOR TO
ISSUING THE SETUR MACRO
CECMD- THE DCB
Explanation: The DCB open flag (DCB03) is not
on.
Completion Code:
01
Reference Dat_a (Also see Appendix B-03.}
Requirement determined by: CZCMD
Variable data supplied by:
N/A
Message residence:
CZCMD
CZCMD
N/A
CECMD - THE SETURS FORM TYPE FIELD MUST SPECIFY
• D'.
• F', OR • S' TYPE
Tht SETURS form type field
(DBPFRMTP) specifies an EBCDIC charact./"r
other than F (form-sensitive), S
(sequence-sensit.ive). or D (dump type).
ComE~€t.ion Code:
01
Refer.ence Data (Also see Appendix B-03.)
Requirement determined by: CECMD
Variable data sUFFlied by:
N/A
~essage residence:
CECMD
Explanat~ion:
CECMD - THE DCB IS INVALID
Explanation: The DCB identifier field (DCBID)
does not specify *%*%. Assume address of
DCB passed to SETUR was invalid.
Completion Code:
01
Reference Data (Also see AFFendix B-03.)
-- Requirement determined by:
CZCMD
Variable data supplied ty:
N/A
Message residence:
CZCMD
CECMC - THE SYSURS FOLDING CODE OPTION FIELD MUST
HPECIFY EI'rHER • F' (FOLDED) OR • U' (UNFOLDED)
CECMD - THE DEB IS INVALID
ICxplaniit_ion:
The DEB identif ier field (DEBID)
is not equal to *%.
Assume the DEB pointer
in the DCB is invalid.
s:g1!'I'letion Code:
01
Heference Data (Also see A~pendix: B-O}.}
----- R,oquirement determined by:
CZCMD
Variable data supplied by:
N/A
~essage residence:
czeMD
CECMD - 1:'HE TWO EBCDIC BY'I'ES OF 'I'IlE UCS STRIKE OUT
C'LdACrER CODE MUST BE IN THE EANGE OF 0-9 OR A-F
iC192lanation:
The DCB form-type field
dump mode, but at least
one of the two Lyt_es, which together define
the lJCS strike out. chardctE;r, does not fall
in 1:_he acceptable range (an EBCDIC character
between 0 and 9 or between b ~nd Fl.
C;'2rn!?.l"" t i 0_f1. __',:~~c~c: 01
Referenc'-";,ta (Also see Appennix 8-(.13.)
---peqllir,,;(ic_:nt deter-mined t,y:
CZCMD
J-~j_l:iaLlt.:: data supplied by:
tl//-t
Message residence:
CZCMD
--
Ti:5C-BFRM'rp} specif ies
J!:.J!1J2lana_tion: The SYSURS folding code option
field (DBPFOLDJ specifies an EBCDIC
character other than F (folded) or U
(unfolded).
£omfl~~~on Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by:
czeMD
Variable data supplied by:
N/A
'/n ,
SETUR is being called for other
time (DCBSUR, the
:c,-UR-in-progress flag, is on), but the
DCfmex field does not cont.ain a value
i'f'twe,_,n 100 and 136, inclusive, as i t
should.
completion Code:
01
Jyste!!LPri?.!l!~~:!:· s
Guide.
£omE"letl.2!l Code:
01
~ence Data {Also see Appendix B-OJ.)
He<,;'Ui reroent determined by:
CEVFM
Variable dat.a supplied by:
N/A
Message residence:
CEVAl
CONTROL OPERATION ATTEMP'l'ED AGAINST UNOPENED DATA
Explanation:
The requested operation cannot be
r;erformed without the information that is
supplied .1 n the data control block (DCB).
Since the data set is unopened, the DeB
cannot be reached for the information.
Completion Code:, 01
Dat~ (Also see Appendix B-03.)
Requirement determined by:
CZCRB
Variable data supplied by: N/A
Message residence:
CZCRB
ReJerence
CURRENT DATA PAGE NUMBER GR THAN NUMBER OF DATA
PAGES
_1'2:Elarl9.tion: An assembler modul(~ r~,guested a
(;.E:rMAIN of zero pages.
This subsequent
i.ed..
Possible causes:
DDEF
::;ti Ll. :'1cti ve ~,gainst a previous volume; next.
vol:.Ame fI;ounted and in use; label error
operator replied "no· to mount
,:,-,quest (because, for example, the volume
·:~ncour.tf:'·x:(?d:;
(:Could not be found).
01
(Also s
"~e"'c;age
Residence:
et-~
i\ppendix B-03.)
determined by;
data snpplied by:
resi.dence:
CZCXX
CZCXX
CZCXX
CZCDL -
ERROR ON 31)81'
(OPEN)
Exlilanatiorp The dynamic loader's GET STORAGE
routine (CGCCW) called SRCBSDST (CZCQE) wit.h
the "open" function to locate a module
!ll('m:ber name in a shared job 1ibz-a ry.
SHCHSDbT qavc a return code other than the
"follnd~
"not found" cede,",.
'rhe dynamic
loader was attempting to .load a module
containing a public CSECT.
Completion Code!
01
Reference Dat2 IAlsa see Appendix 8-29.)
-"--Reql1irell~;·;;t: determined by:
CGCCW
or
Page of GC28-2037-7. Issued February 1, 1972 by TNL GN28-3209
variable data supplied by:
t~"ssage residence:
CZCDLC
N/A
number into the module mp.:mber which was too
large.
The available space in the VPAM
RESTBL fO]:" new external page entries has
CZCDL -
REFERENCE BEYOND DATA SE'l' END,
MODULE
module name, LIBRARY DONA ME data definition name
Explanation: The dynamic loader's SETPAGE
routine (CGCSP) was passed a relative page
an
add:r:"ess lower than that calculated for: the
external page entry for the requested
relative page number.
ComFletion Code:
02
Reference Data (Also see Appendix B-29.)
Part IIJ:
Abnormal Task Termination Messages
74.1.
Requirement determined by:
Variable data supplied by:
Message residence: CZCDLP
routines which use SETXP macro
Message residence: CZCEI
CGCSP
CGCSP
CZCDL - RVN FOUND IN EPE TOO LARGE, MODULE module
name, LIBRARY DDNAME data definition name
Explanation: The dynamic loader's SETPAGE
routine (CGCSP) detected an invalid relative
volume number (RVN) in the external page
entry CEPE} associated with the page whose
relative page number into the member was
passed by the ATTACH TEXT routine (CGCCK).
The RVN was found to be larger than the
volume count for the task.
Completion Code:
02
Reference Data (Also see Appendix B-29.)
Requirement determined by: CGCSP
Variable data supplied by: CGCSP
Message residence: CZCDLP
CZCDL - VAM DID NOT RETURN CORRECT PHD
Explanation: The dynamic loader's LOAD PMD
routine has detected that the address
returned by VAM GET (locate mode) for a
program module dictionary (PMD) is not the
address of the expected PHD. The PHD length
given in the library used does not match the
value given in the contents of the PHD
length field located using the address
returned by VAM GET.
completion Code:
02
Reference Data (Also see Appendix B-29.l
Requirement determined by: CGCCH
Variable data supplied by:
N/A
Message residence: CZCDLC
CZCEI - ATTEMPT TO READ PAGE ALREADY MARKED IN PAT
AS ERROR PAGE.
SDA=xxxx. REL PAGE=xxxx
Explanation: Any page marKed as error should
have been relocated, and the good copy used
by VAM routines.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCEI
Variable data supplied by: CEAAQ
Message residence: CZCEI
CZCEI - AUX INPUT PAGING ERROR TO VAM
FROM SDA = xxxx
xxxxxxxx
Explanation:
Input paging error- from paging
pack or other auxiliary devi.ce.
Completion Code:
02
Reference Data {Also see Appendix B-03.l
Requirement determined by: CZCEI
Variable data supplied by: CEAAQ
Message residence: CZCEI
CZCEI - ERROR PAGE NUMBER xxxx EXCEEDS
DEVICE LIMITS FOR {2311}
2314
Explanation: Bad parameter received by CZCEI.
Completion Code:
02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCEI
Variable data supplied by: CEAAQ, VM
CZCEI - NO MATCH FOR ERROR PAGE xxxxxxxx FOUND IN
ANY CURRENT RESTBL
Explanation: VMIER unable to classify error
page as PAT. DSCB, AUX, or DATA page. No
other logical possibilities exist.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCEI
Variable data supplied by: CEAAQ
Message residence: CZCEI
CZCEI - PAGING ATTEMPTED FROM NON-DIRECT ACCESS
DEVICE AT SDA=xxxx
Explanation: Bad parameter from paging
supervisor.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCEI
Variable data supplied by: CEAAQ
Message residence: CZCEI
CZCEI - TRY TO ACCESS RECORDS FROM A DATA SET ON A
SPECIFIED VOLUME WHICH IS UNAVAILABLE OR
DISASSOCIATED FROM SYSTEM
Explanation: A check was made on the volume
i.d., and if this was equal to zero, the
volume is considered unavailable to the
system. For example, if the user asked the
operator to mount a private volume by means
of a DDEF command, and then after asking the
operator to hold the device on which the
volume was mounted tried to access a data
set. on the volume, this error condition
would result.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCEI
Variable data supplied by: N/A
Message residence: CZCEI
CZCEI - UNRECOVERABLE INPUT PAGING ERROR TO
DATASET
Explanation: A request for a new page in
virtual memory by means of FINDEXPG has not
been fulfilled: public storage is full.
completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCEI
Variable data supplied by: N/A
Message residence: CZCEI
CZCEI - UNRECOVERABLE INPUT PAGING ERROR TO
NONDUPLEX DATASET
Explanation: An input error has occurred on a
data set for which there does not exist a
duplicate copy. A good copy of the error
page can not be substituted.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCEI
Variable data supplied by: N/A
Message residence: CZCEI
Part lIT:
Abnormal Task Termination Messages
75
CZCEI - UNRECOVERABLE INPUT PAGING ERROR TO
SECONDARY COpy OF DUPLEX DATA SET: data set name
Explanation:
Secondary copy of duplex data set
failing means primary copy also failing.
System cannot process data set.
Completion Code:
02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCEI
Variable data supplied by:
CEAAQ
Message residence:
CZCEI
private; or (2) multivolurnes are prohibited
and there is not enough space on the volumes
the data set currently resides on.
ComFletion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCEH
Variable data supplied by: The job file
control block.
Message residence:
CZCEKP
CZCEQ - ERR DEVICE CODE CODE INVALID - NOT 2311 OR
2314
CZCEJ-l - BAD TYPE CODE RECEIVED ON INPUT
~lanation:
Improper type code presented to
CZCEJ
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCEJ
Variable data supplied by:
CZCEJ
Message residence:
CZCEJC
CZCE.1-2 - AT'l'EMPTED RESET OF LOCK SET BY ANOTHER
TASK
Explanation: This task attempted to .reset a
lock not set by this task.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by:
CZCE.T
Variable data supplied by: N/A
Message residence: CZCEJC
CZCEcl-3 - ATTEMPT TO SET MORE LOCKS (SDAPLO> THAN
ALLOWED PER TASK
Explanation:
Task attempted to set too many
locks.
Corrpletion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCEJ
Variable data supplied l::y:
N/A
Message residence:
CZCEJC
CZCEJ-5 - ATTEMPT TO RESET LOCK NOT SET
E>q:;lanation: This task attempted to reset a
lock that had not been set.
Completion Code:
01
Reference Data (Also see AFpendix 8-03.)
Requirement determined ry:
CZCEJ
Variable data supplied by: N/A
Message residence:
CZCEJC
CZCEJ-6 - BAD SDAT POINTER RECEIVED ON INPUT
Explanat ion: The pointer to t.he SDAT entry to
be locked is not within the range of SDAT.
Completion Code:
01
Reference Data (Also see Affendix B-03.)
Requirement det.ermined l::y: CZCEJ
Variable data supplied by: N/A
Nessage residence: CZCEJC
CZCEK -
INSUFFICIENT SPACE FOR DATA SET data set
nan.(;
Ex!='lanation: A nonzero return code from
VO:LSRCH indicates that either (l) no space
is available on any volume, public or
76
Explanation: The volume to be initialized has
an indication that it is neither a 2311, nor
a 2314. VAM volume to be initialized must
be on one of these devices.
CcmFletion Code:
01
Reference Data (Also see Appendix B-O 3 •. )
Requirement determined by: CZCEQ1
Variable data supplied by: N/A
Message residence: CZCEQP
CZCEQ - ERR VAMINIT INVOKED TO INITLZ PUBLIC
VOLUME.
Explanation: VAMINIT (CZCEQ) should be called
to initialize private VAM volumes only. A
check of the SDAT (SDAPP) shows this to be a
public volume.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCEQ1
Variable data supplied by: N/A
Message residence: CZCEQP
CZCEQ - ERROR ENCOUNTERED READING VOLUME LABEL.
Explanation: OBTAIN (CZCFO) called to read the
volume label of volume to be initialized.
It has returned to VAMINIT with an error
indication.
comFletion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCEQ1
Variable data supplied by:
N/A
Message residence: CZCEQP
CZCEQ - ERROR STORAGE DEV.
UP.
ALLOC.
TABLE LOCKED
Explanation: VAMINIT (CZCEQ) in checking the
SDAT lock (SDALOC) has found it set and
never released. The lock byte is checked 10
times with TSEND between each.
ComFletion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by:
CZCEQ1
Variable data supplied by:
N/A
i"Jessage residence: CZCEQP
CZCEQ - ERROR VIRTUAL MEMORY REQUEST NOT GRANTED.
Explanation: GETMAIN is called to allocate
virtual rr.emory for PAT to be read into.
It
has returned to VAMINIT with an error
indication that space is not available.
Comrletion code~ 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCEQ1
Variable data supplied by:
Message residence: CZCEQP
N/A
Requirement determined by:
Variable data supplied by:
Message residence: CZCEYP
CZCEY1
N/A
CZCEQ - ERROR VOLUME LABEL NOT VAM2.
Explanation: VAMINIT in checking volume label
of volume to be initialized has found it is
not VAM2 fermat label.
Completion Cede: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCEQ1
Variable data supplied by:
N/A
Message residence: CZCEQP
CZCEY - DCB(s) TO BE DUPLEXED OPEN ARE IN JOBLIB,
CANNOT BE DUPLEXED
Explanation: DCB(s) are associated with the
DDEF that defines a JOBLIB. They IDay not be
duplicates of each other because one or both
may have had different records stowed or
Updated, and any similarity now is defunct.
They have to be duplicates.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCEY1
Variable data supplied by:
N/A
Message residence: CZCEYP
CZCEY - ERROR DATA SET IS NOT PUBLIC
Explanation: DUPOPEN should only be called for
public VAM volumes.
In checking TDTV1 there
is no indication that set is public.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCEY1
Variable data supplied by:
N/A
Message residence: CZCEYP
CZCEY - ERROR DATA SET IS NOT VAM ORG.
Explanation: DUPOPEN has checked JFCB
(TDTDSV), and the indications are that data
set to be processed is not of VAN
organization.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCEY1
Variable data supplied by:
N/A
Message residence: CZCEYP
x CZCEY -
ERROR DCBS ARE NOT COMPATIBLE
Explanation: The two DCBs being opened for
duplicate set have been found to be not
alike. The number that precedes the message
will indicate which field is not compatible
in DCBs. Code is as follows:
1 - DCBKEY
2 - DCBREC
3 - DCBLRE
4 - DCBRKP
5 - DCBPAD
6 - DCBSYV
7 - DCBEOV
Completion Code: 01
Reference Data (Also see Appendix B-03.)
CZCEY - ERROR NO JFCB COULD BE FOUND OR CREATED
FOR PRIMARY DCB
Explanation: DUPOPEN searches the job file
control block (JFCB) table in search of a
DDNAME (data definition name) associated
with the primary DCB (data control block)
given in parameters. No compatibilty JFCB
could be found.
FINDJFCB was called to
create a JFCB but returned a condition code
indicating that it was not successful.
possibly no DDEF (data definition) command
was executed to create a JFCB.
Com£1§tion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCEY1
Variable data supplied by: N/A
Message residence: CZCEYP
CZCEY - ERROR NO JFCB FOUND FOR PRIMARY DCB
Explanation: DUPOPEN searches the JFCB table
in search of a DDNAME associated with the
primary DCB given in parameters. No
corrpatible JFCB could be found.
Completion Code: 01
Reference Data (Also see Appenaix B-03.)
Requirement determined by: CZCEY1
Var"iable data supplied by: N/A
~essage residence:
CZCEYP
CZCEY - ERROR NO JFCB FOUND FOR SECONDARY DCB.
Explanation: DUPOPEN, in searching the JFCBS,
could find no compatible one tc go with the
secondary DCB given in parameters.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCEY1
Variar;le data supplied by: N/ A
Message residence: CZCEYP
CZCEY - ERROR SA~E JFCB SPECIFIED FOR BOTH DCB'S
THAT ARE BEING DUPOPENED. BOTH SHOULD HAVE UNIQUE
JF'CBS.
Explanation: It has been found that the jot
file control block (JFCB) for both DCBS to
be duplexed open is the salT,e. This cannct
occur for duplicated sets because each must
be a separate and distinct DCB/JFCB. Try
changing the DDNAME of one.
Compl~tion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCEY1
Variable data supplied by: N/A
~essage residence:
CZCEYP
CZCEY - NO JFCB COULD BE FOUND OR CREATED FOR
SECON. J FCB.
Explanation: In searching the job file control
tlock (JECB), DUPOPEN could find nc
conpatible JFCB to go with the secondary DeB
given in parameters. FINDJFCB was called to
create a JECB and returned a code indicating
Part III:
Abnormal Task Termination Messages
77
that the creation was not successful.
Completion Code:
01
Reference Data (Also see A~pendix B-03.)
Requirement determined by:
CZCEY1
Variable data supplied by: N/A
Message residence:
CZCEYP
CZCEZ -
Conversational:
User's terrrinal
Nonconversational: SYSOUT
Transmittal technique:
ABEND
CZCFA -
ERROR DATA SET IS NOT VAM
Explanation:
DUPCLOSE, in checking the DCBs
given in parameters, found indications that
the data set is not VAM.
The field DCBDSO
was referred to for this check.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by:
CZCEZ1
Variable data supflied by:
N/A
Message residence:
CZCEZP
CZCFA COTJLDN' 'I' FIND OR CREA'I'E 11 JFCB .FOR DS TO BE
SCRATCHED, AT LEVEL level IN FQN=(dsname)
Explanation:
The option code in the second
word of the parameter list was not correct;
it did not specify update for an old data
set.
Preceded by minor software SYSER
080102715.
Ccmrleticn Code: 01
Reference Data
Requirement determined by:
CZCFA2
Variable data supplied by:
N/A
Message residence:
CZCFA
1'1essage issued by: CZACP
Destination
Conversational:
User's terminal
Nonconversa tional:
SYSOUT
Translrittal technique: ABEND
CZCFA -
Explanation:
ADD CAT (CZAFAl) tried to scratch
a data set, but. a JFCB could not be creat:ed
by calling FINDOS.
Completion Code:
01
Reference Data
ReqUirement determined by:
CZCFA
Variable dat.a supfClied ty:
CZCFA
CZCFA DATA SEr NAME DOES NOT HAVE A GENERA'l'ION,
AT LEVEL level IN FQN=(dsname)
~lanation:
The data set name passed to
ADDCAT (CZCFAJ wafi an old dat.a fiet narr,e, but
tne SBLCCK pOinted to by the name was a
generation index SBLOCK.
.completion Code:
01
Reference Data
Requirement determined by:
CZCFA
Variable data supplied by:
CZCFA
CZCFA DATA SIT NAl'j~ IS NOT FOLLY
LEVEl, level IN FQN= ( dsname)
QUALn~IED.
AT
Explanation:
An old data set. nan,e was pafised
to ADDCAT (CZCFA) but the SBLOCK Fcointed to
by the name was not a data set descriptor.
Corrpletion Code:
01
Reference Data
Requirerrent determined l:y:
CZCFA
Variahle data sUfFclied by:
CZCFA
CZC.FA -
DATA SET NOT SHAREABLE.
Explanation: This user is not allowed to share
the data set he has specified; he does not
own it.
This is determined by return code
from I,QCATb or IN[;EX.
Preceded by minor
soft.ware SYSER 080102709.
compl eti..911 Code:
01
Reference Data
Requirement determined Ly:
CZCFA2
Variable data supplied by:
N/A
Message residence:
CZCFA
Message issued by:
CZACP
Destinaticn
Conversational:
User's terminal
Nonconversational:
SYSOUT
Transmittal technique:
ABEND
ERROR IN OPTION CODE PASSED TO ADDCAT.
ERROR ON GATWR
~~lanation:
GATWR was not completed
successfully.
Preceded by minor software
SYSER 080102703.
~ompletion Code:
01
Reference Data
:Requirement determined by: CZCFA1
Variable data supplied by:
N/A
t~essage residence:
CZCFA
~essage issued Ly:
CZACP
.Gestination
Conversational:
User's terminal
Nonconversational:
SYSOUT
Tran3rrittal technique: ABEND
CZCFA - ERROR RETURN FROr.: DELCAT/DEIVAM •
gxplanation: An atterr,pt was !fade to delete a
,iata set from the catalog and CELVAM or
LELCAT is called.
In CZCFA1, DELCAT was
unable to delete a narr'e from the catalog
successfully.
In CZCFA2, DELVAM was unable
to erase or delete the data set.
If the
data set could not be deleted the abend is
taken, the reason being that deleting a data
set without. unlimited access, or working in
VAk and trying to delete a data set which is
not VAt! Cd uses abnorrral termination.
Preceded by minor software SYSER 080102704.
Completion Code: 01
Reference Data
---Kequirement determined by:
CZCFA1, CZCFA2
Variable data supplied by:
N/A
Message residence: CZCFA
MEssage issued by:
CZACP
Destination
Conversationai:
User's terrrinal
Nonconversat.ional:
SYSOUT
Transmittal technique: ABEND
CZCFA - bRROR IU:TlJRN OF 04 FRat! INDEX/LOCATE.
Explanat.ion:
LCCATE or INDEX was called to
find a requested data set.
Eein'::j unable to
find the llserid in the POD of the catalog,
the module called returned a return code of
X '04', which resulted in the abnormal
tcermination.
Preceded by minor software
SYSER 080102707.
Completion Code:
01
Reference Data
Requirement determined by:
CZCFA2
Variable data supplied cy:
N/A
Message residence:
CZCFA
Message issued by:
CZACP
Destination
Conversational:
User's terminal
Nonconversational:
SYSOUT
Transmittal teclmique:
ABEND
C~CFA
- FQN
FOR~AT
ERROR.
Explanation: The FQN was incorrect. Preceded
by minor software SYSER 08010270l.
Completion Cede:
01
Reference Data
Requirement determined cy:
CZCFA1, CZCFA2
Variable data supplied by: N/A
Message residence: CZCFA
Message issued by:
CZACP
Des ti na ti on
Conversational:
User's termina~
Nonconversational:
SYSOUT
Transrrci ttal technique: ABEND
CZCFA - NCN-VALID RETURN CODE FROM INDEX/LOCATE.
Explanation:
A return code greater than X 'OC'
was returned bi' INDEX or LOCA.TE; a return
code greater than X 'lC' was returned by
DELVAM.
LOCATE was called to find the data
in the catalog, or INDEX was called to add
the data set to the catalog.
Either routine
received an abnormal return code. Or DELVAM
was called to delete a data set and received
an abnormal return code.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by:
CZCFA2. C~CFAl
Variable data supplied by:
N/A
Message residence:
CZCFA
CZCFA - NONZERO RETURN FROM A[;D[;SCE.
EXElanation:
ADD CAT received a return code
other than zero from A[;[DSCB.
Preceded by
minor software SYSER 080102713.
Completion Code:
01
Reference Data
Requirement determined by:
CZCFA2
Variable data sUfflied ty:
KIA
Message residence:
CZCFA
Message issued by:
CZACP
Destination
Conversational:
User's terminal
Nonconversational: SYSOUT
Transmittal technique: AEEl\L
CZCFA - USER DOESN'T HAVE
ACCESS.
UN~I~ITED
Destination
Conversational:
User's terminal
Nonconversational: SYSOUT
Transmittaltechnigue:
ABEND
CZCFA - RELATIVE GENERATION NU~BER NOT CONVERTED
TO AESOI.UTE GOOOOVOO BY LOCATE •
.Exp.l.anation: User specified a relative
generation for a nongeneration data set or a
sharing descriptor.
Not preceded by a
SYSER.
Ccmpletion Code: 01
Reference Data
Requirement determined by:
CZCFA2
Variatle data supplied by:
N/A
Message residence:
CZCFA
Message issued by:
CZACP
Destination
Conversational:
User's terrrinal
Nonconversational: SYSOUT
Transrr,i tta 1 technique: ABEND
CZCFA UNEXPECTED RETURN CODE FROM DELCAT, AT
LEVEL level IN FQN= (dsname)
Explanation:
DELCAT (CZCFD) was called tc
delete a data set from the catalog. and a
non-zero return code was received.
ComFletion Code:
01
Reference Data
Requirement determined by:
CZCFA
Variable data supplied by: CZCFA
C2,CFG SYSTEI" FAULT:
UNEXPECTED EODAD OCCURREr;
WhEN A'I'n.foIPTING TO INPUT A CATALOG MEMBER
Explanation:
An EODAD condition cccurred
during a GET or PUT operation on the catalog
IPembeI." •
Ccmr;letioE-Code: 01
Reference Data
Requirement determined by: CZCFG
Variable data supplied by:
N/A
CZCFG SYSTEfoi FAULT: UNEXPECTED RETURN CODE
DETECTED WHEN CLOSING CATALOG ~EMBER
1xplanaticn: GETSBI.OCK (CZCFG4) called STOW to
clese the catalog member, and received a
non-Lero return code.
ccrri!::;letion Code: 01
Reference Data
Hequirement determined by: CZCFG
Val:iable data supplied by:
N/A
SHARING
Explanation: User is atterr'pting to access an
old data set to which he has not teen
penni tted.
Determined t1' checking SBLOCK
flags.
Not preceded by a SY~:ER.
Corr,pletion Code:
01
Reference Data
Requirerr
INVALID FQN, AT LEVEL level
Explanation: The FQN Fassed to INDEX (CZCFI)
does not have an 8-character userid, or a
qualifier in the name is either greater than
8 characters in length or contains no
characters.
Completion Code: 01
Reference Data
Requirement determined by: CZCFI
Variable data supplied by: N/A
Requirement determined by:
Variable data supplied by:
CZCFI
CZCFI
CZCFI SYSTEM FAULT: UNEXPECTED END OF SBLOCK
CHAIN DURING A BACKFILL, AT LEVEL level IN
.FQN= (dsname)
Explanation: INDEX (CZCFI) is backfilling a
nunber of side members to the nearest empty
index slot to make room for a new member.
CZCFI tried to get the next extended SBLOCK
in an SBIOCK chain, but the forward pointer
was zero. A previous check of the index
level indicated that there was an extended
SELOCK.
Completion Code: 01
Reference Data
Requirement determined by: CZCFI
Variable data supplied by: CZCFI
CZCFI SYSTEM FAULT: UNEXPECTED MATCHED
GENERATION MEMBER ENCOUNTERED, AT LEVEL level IN
FQN={dsname)
Explanation: INDEX (CZCFI) called LOCATE
(CZCFl,) and received a return code of X' 08'
indicating that all qualifiers in the name
were not found in the catalog. LOCATE
returned a generation idnex SBLOCK, but the
GxxxxVxx member narr€ was found by CZCFI
while searching the generation index.
Completion Code: 01
Reference Data
Requirement determined by: CZCFI
Variable data supplied by: CZCFI
CZCFL FQN FOR~~T ERROR, AT LEVEL level IN
FQN=(dsname)
Explanation: The fully-qualified name in
LOCATE's parameter list does not have the
proper format (for example, contains a
userid that is not 8 characters long).
cemFletion Code: 01
Reference Data
Requirement determined by: CZCFL
Variatle data supplied by: CZCFL
CZCFL FQN RELATIVE GENERATION FORr-LAT, AT LEVEL
level IN FQN=(dsname)
Explanation: The generation portion of an FQN
does net have the proper forRat.
~~letion Code:
01
Reference Data
Requirement determined by: CZCFL
Variable data supplied by: CZCFL
CZCE'I SYSTEM FAULT: INVALID REQUEST TO CREATE
USbHIL INDEX, AT LEVEL level IN FQN=!dsname)
CZCFL
INDEX (CZCFI) was called to
create a new member in the catalog for a
specific userid. possible problems: the
userid is shorter than 8 characters, the
delimiter after the userid is not a period,
the option code to CZCFI indicates a
generat.ion index, or t.he SYSCAT DCB
indicates that the number of data pages for
~lanation:
the member is not zero ..
COlrpletion Code:
Reference [;ata
80
01
L~VEL
INVALID OPTION CODE IN INPUT PARAMETERS, AT
level IN FQN=(dsname)
Explanation: The option code passed to CZCFL
(pointed to be the second word of the
parameter list) is not equal to one of the
following hexadecimal numbers: X'0004',
X'0008', X'OODC', X·0010'. or X'0014'.
CcmFletion Code: 01
Reference Data
Requirement determined by: CZCFL
Variable data supplied by: CZCFL
CZCFL LOCATE HAD TO IMPLICITLY RELEASE A MEMBER
LOCKED UP FOR UPDATE, AT LEVEL level IN
FQN= (dsname)
Explanation: LOCATE attempted to close a
catalog member, but a flag in the catalog
common area (CHACDS) was set indicating that
the catalog was locked.
completion Code:
01
Reference Data
Requirement determined by: CZCFL
Variable data supplied by: CZCFL
ExPlanation: MSAM supports only a single DCB
for each data set for regular unit record
euqipment, and two DCBs for each RJE device.
This abnormal termination occurs when
control passes to MSAM OPEN and it
encounters an invalid nurrber of DCBs oFened
for this data set, TDTOPN. For non-RJE
devices, any nonzero value is invalid; fcr
RJE this number must be either zero or one.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCMC
Variable data supplied by: N/A
Message residence: CZCMC
CZCFL UNEXPECTED RC FROM FIND, AT LEVEL level IN
FQN= (dsnarne)
CZCMC - DCB DEVICE OPTION INVALID FOR MSAM
Explanation: FIND was called to handle the
catalog member, and returned a code of
X'OB', X'OC', X'lO', or X'1lj'.
Completion Code: 01
Reference Data
Requirement determined by: CZCFL
Variable data supplied by: CZCFL
CZCFL USERID NOT IN FIRST SBLOCK OF CATALOG
MEMBER, AT LEVEL level IN FQN=(dsname)
Explanation: A FIND was performed on the
catalog member in CZCFL. The first SBLOCK
in the catalog did not have a userid
(CCCNME), was not an index SBLOCK, or its
VMA address was not in range of the catalog.
Completion Code: 01
Reference Data
Requirement determined by: CZCFL
Variable data supplied by: CZCFL
CZCFT - UNRECOVERABLE DSCB ERROR.
Explanation: A Checksum error was encountered
in the READDSCB subroutine. Message
immediately preceded by minor software SYSER
OB0304006.
Completion Code: 01
Reference Data
Requirement determined by: CZCFT
Variable data supplied by:
N/A
Message residence: CZCFT
Message issued by: CZACP
Destination
Conversational: User's i:erminal
Nonconversational: SYSOUT
Transmittal technique: AEEND
CZCFU CANCELLED: SYSTEM FAULT; UNEXPECTED RETURN
CODE FRO~ INDEX, AT LEVEL level IN FQN=(dsname)
Explanation: INDEX CCZCFI) was called by
SHAREUP (CZCFU) to build the index levels in
the sharer's name, but CZCFT returned a
non-zero return code.
Yet previous checks
have indicated that the only possible return
code is X'OO'.
Cowpletion Code: 01
Reference Data
Requirement determined by: CZCFU
Variable data supplied ty:
CZCFU
CZCMC - ATTEMPT TO OPEN MORE THAN ONE DCB FOR THIS
DATA SET
Explanation: OPEN does a series of DCB field
validations following register
initialization. This abnormal termination
results if the DCB device field (DCBDEV)
specifies a device other than reader, punch,
printer, RJE reader, or RJE printer. These
are the only devices supported by MSAM.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCMC
Variable data supplied by: N/A
Message residence: CZCMC
CZCMF
CO~BINE
SPEC'D, STACKER NOT RP3
Explanation: The DCB specifies the COMBINE
(reader with punch) option, but the punch
stacker bin as specified by control
character or DCB stack option is not the
required pocket, RP3.
Check input
sr:ecification.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCMF
Variable data supplied by: N/A
Message residence: CZCMF
CZCMF
DECEB NEITHER R/W RQST NOR COMPL W ERR
Explanation: Because of a programming bug in
MSAM or elsewhere in the systerr, the MSAM
READ/WRITE module (CZCMF) has been linked to
with a DECB whose completion code is neither
"READ/WRITE" REQUEST nor "COMPLETE WITH
~RROR," the two codes expected by CECMF.
System error processor message 041202B02
irrrrediately preceded this abnormal task
termination.
ComFletion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCMF
Variable data supplied by: N/A
Message residence: CZCMF
CZCMF
INVALID IeRCB ADDRESS IN EUFFER PAGE
Explanation: The IOReB address contained in
the first word of the buffer r:age associated
with the current DECR has probably been
changed (illegally) by the user. Check the
LECBs and the buffer control bytes.
CcmFletion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCMF
Part III:
Abnormal Task Termination Messages
81
Variable data supplied by:
Message residence: CZCMF
N/A
CZCMF MINOR SOFTWARE ERROR--SYSERR ISSUED
Explanation:
P. progranuning bug in MSAM ox·
elsewhere in the system.
System error
processor message 041202801 immediately
preceded this abnormal task termination. An
error return code received from DIR, and
MSAM READ/WRITE cannot continue processing
for its device.
Completion Code: Ot
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCMF
Variable data supplied by: N/A
Message residence:
CZCMF
CZCMF
CZCMl - ERROR RETURN CODE RECEIVED FROM A MACRO
Explanation: Processing is continuing,
following a system error processor message
041203101 or 041203102.
MSAM CLOSE calls
for abnormal termination of the task
following a system error dump. The system
error processor messages and the subsequent
abend were caused by a nonzero return code
from the DIR or INTINQ macros when CLOSE
found an ICB pointer in the DCB and (1) if
I/O was still going on, attempted to issue
INTINQ. or (2) if I/O had completed,
attempted to issue DIR.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCMI
Variable data supplied by:
N/A
Message residence:
CZCMI
PERMANENT ERROR ON DEVICE-- ILLEGAL CALL
Explanation: Because of a programming bug in
MSAM or elsewhere in the system, the MSAM
READ/WRITE module (CZCMF) has been called to
reissue an IORCB that. failed, though the DEB
associated with the device indicates
permanent error (DEBNF2 on) on that device.
Syst.em error processor message 041202803
immediately preceded this abnormal task
termination.
Completion Code:
01
~eference Dat~ (Also see Appendix B-03.)
Requirement determined by: CZCMF
Variable data supplied by: N/A
Message residence:
CZCMF
CZCMH - ERROR RETURN CODE RECEIVED FROM A MACRO
Explanation:
Processing is continuing,
following a system error processor message
041203001 to 041203003 caused by an error
return code from the WTO, SIR, or DIR macro.
F'INISH calls for abnormal termination of the
task following a system error dump.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCMH
Variable data supplied by: N/A
Message residence:
CZCMH
CZCMH - THE DCB IS INVALID
Explanation:
The DCB identifier field (DCBlu)
does not specify *%*%. Assume the DCB
address passed to FINISH is invalid.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCMH
Va.riable data supplied by: N/A
Message residence:
CZCMH
CZCMI - THE DEB IS INVALID
Explanation: ~ne DEB identifier field (DEBID)
does not specify *%. Assume the DEB pointer
in DCB is not valid.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCMI
Variable data supplied by: N/A
Message residence: CZCMI
CZCOA - BAD RC FROM CZCEM.
FAILURE TO READ DSCB.
Explanation: The attempt to open the data set
has failed.
OPENVAM (CZCOA) must read the
DSCB{s) to obtain the extents of the data
set.
DSCB READ/WRITE (CZCEM) could not read
a DSCB.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCOA1
Variable data supplied by:
N/A
Message residence: CZCOAC
BAD RC FROM CZCEM. FAILURE TO WRITE DSCB.
BAD DSCB POINTER PROBABLE CAUSE
CZCOA -
Explanation: The attempt to open the data set
has failed.
OPENVAM (CZCOA) must read the
DSCB(s) to obtain the extents of the data
set.
DSeB READ/WRITE (CZCEM) could not
write a DSCB. The most likely cause of this
failure is an invalid DSCB pOinter.
Completion Code:
02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CACOZC
Variable data supplied by:
N/A
Message residence:
CZCOAC
CZCOA - CHECK CLASS DETECTED UNASSIGNED PAGE
CZCMH - TIlE DEB IS INVAI,ID
Explanation: The DEB ident.ifier field (DEBID)
does not specify *%. Assume the DEB pointer
in the DeB is invalid.
Completion..Code:. 01
~~eren~e Dat~ (Also see Appendix 13-03.)
Requirement determined by: CZCMH
Variable data supplied by:
N/A
Message rE",sidence:
CZCMH
32
Explanation: A check class was issued to
determine the protection class of the DCB.
An error return was received from check
class indicating that the page containing
the DCB is not assigned to this task's
virtual memory.
Completion Code:
02
Reference Data (Also see Appendix B-03.)
Requirement determ~ned by: CZCOA
Variable data supplied by:
Message residence: CZCOAC
Explanation: An error return code was received
from one of the following routines:
CZCQE.
Search Shared Data Set; CZCOK. STOW; CZCFT.
DELVAM; CZCOC, MOVEPAGE.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCOBl
Variable data supplied by:
N/A
Message residence: CZCOBP
N/A
CZCOA - DEVICE CODE IS NOT FOR A VAM DEVICE
Explanation: In checking the type of device on
which the data set resides (to determine the
length of the page assignment table).
OPENVAM has found that the device is not
authorized for the virtual access method
(VAM).
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCOAI
Variable data supplied by:
N/A
Message residence:
CZCOAC
CZCOA -
CZCOB - DIRECTORY PAGES EXIST FOR A D.S.
SHOULDNT.
Explanation: It was found that directory pages
existed for a data set that was neither a
VPAM nor a VISAM data set. ~hese two types
are the only ones that should have directory
fages.
Completion Code:
02
Reference Data (Also see Appendix B-03.)
~equirement determined by:
CZCOBl
Variable data supplied by: N/A
Message residence:
CZCOBP
INVALID DSCB PTR.
Explanation: OPENVAM has determined that the
next data set control block to be read has a
pointer of zero.
Completion Code: 01
Reference Data (Also see Afpenuix B-03.)
Requirement determined by: ClCOA1
Variable data supplied by: N/A
Message residence: CZCOAC
CZCOA - REL.
LIMIT.
VOL.
CZCOC - DCBM NOT ONE FOR VI
Explanation: MOVEPAGE loaded the shared entry.
determined that the data set organization in
t:he DCB was VISAM. and that the DCBM field
(the number of pages involved in the
request) is not a none. n
Completion Code:
02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCOC
Variable data supplied by:
N/A
Message residence: CZCOC
NUMBER IS OUT OF VOLUME TABLE
Explanation: A relative volume number for the
next data set control block (DSCB) to be
brought in is erroneous. The number is not
within the public volume ta~le (PVT) limits
set in the PVT ECT area.
Completion Code:
01
Reference Data (Also see Afpendix B-03.)
Requirement determined by: CZCOA1
Variable data supplied by:
N/A
Message residence: CZCOAC
CZCOA - SHARED DATA SET CANNOT BE EXPANDED.
Explanation: The RESTBL appea.rs to be filled
up and cannot be expanded because data set
is snared with RESTEL, a fixed entity.
Completion Code:
02
Reference Data (Also see Afpendix E-03.)
Requirement determined by: CZCOA1
Variable data supplied by: N/A
Message residence: CZCOAC
CZCOA - TRYING TO PGOUT UPDATED DSCE - ENCOUNTERED
ERR.
Explanation: An 'E' DSCB has been updated as
to its reference date and possibly its
change date; it must now be rewritten to
EXTRN. The write-out was unsuccessful. and
PGOUT returned an error indication.
Completion Code:
02
Reference Data (Also see Afpendix B-03.)
Requirement determined by: CZCOA1
Variable data supplied by: N/A
Message residence: CZCOAC
CZCOB - CZCXX RETURNED ERROR INDICATION.
**
CZCOC - ILLEGAL DSORG
Explanation: While attempting to validate the
DCB and move page request. MOVEPAGE cheoks
tbe jata set organization field in the DCE.
MOVEPAGE determined that the data set was
not VAM organization (field was greater than
x'75') nor was it a POD page.
Completion Code:
02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCOC
Variable data supplied by: N/A
Message residence:
CZCOC
CZCOC - ILLEGAl VI BUFFER PASSED TO MOVEPG
Explanation:
MCVEPAGE loaded the shared entry
and determined that the data set
organization in the DeB is VISAM, but that
the buffers are not equal.
~ompletion Code:
02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCOC
Variable data supplied by: N/A
~essage residence:
CZCOC
CZCOC - PAGEOUT ERROR DETECTED - RETRIED 3 TIMES
Explanation:
Unable to recover froIT a fagecut
~rror after three retries.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCOC
Part III:
Abnormal Task Termination Messages
83
Variable data supplied by:
Message residence:
CZCOC
N/A
CZCOC - UNRECOVERABLE PAGEOUT ERROR ON RETRY
Explanation:
An unrecoverable pageout error
occurred while attempting recovery from a
pageout error.
completion Code:
02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCOC
Variable data supplied by:
N/A Message
residence:
CZCOC
CZCOG - Nf'TEMPT TO DELETE PAGES WITH VP
ORGANIZATION.
gp].ana·tion: VPAM data set organization cannot
be handled by CZCOG.
CZCOG sets up
addressability, gets the address of the DCB,
then checks the dat-_a set organization in t_he
DCB.
A data set field entry of x'75'
indicates VPAM, which produced this ABEND
comhtion.
Completion co~e:
02
Reference Data (Also see Appendix £-03.>
Requirement determined .ty: CZCOG
Variable data sUfplied J:y:
N/A
!'l€Ssage residence:
CZCOG
czeOH
INVALID TYPE OPTION SPECIFIED
Ex£lanat~n~
Reguest was made to set an
inteL-lock, but the type of interlock to be
set was incorrectly specified in the
pa:r:ameter list..
Systern error processor
message 040503501 immediately preceded this
abnormal termination of the task.
completion Code:
02
Reference Data (Also see Appendix B-03.)
Requirement determined by: czeCH
Variable data supplied by: N/A
i is invalid. There is no
modification routine corresponding to the
modification routine number that was passed
to CZC.'WM.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCWM
Variable data supplied by: CZCWM
Message residence: CZCWM
CZCWM-3B46-1039 ERROR ENCOUNTERED PROCESSING
MESSAGE message code, MODULE rrodule
identificat_ion, ABEND abend code.
Explanation: The input to the message writer
module (CZCWM) was invalid. There is no
response routine corresponding to the
response routine number which was passed to
CZCWM.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCWM
Variatle data supplied by: CZCWN
Message residence:
CZCwM
CZCWM-3B47-1039 ERROR ENCOUNTERED PROCESSING
MESSAGE message code, MODULE Itodule
identification, ABENB abend code.
Explanation: The input to the message writer
module (CZCWM) was invalid. There is no
data extent block (DEB) pointer in the SAM
communication block {SCB>, or there was no
symbolic device address table (SDAT) pointer
in the DEB.
Completion Code: 01
Reference Data (Also see Appendix £-03.)
Requirement determined by:
CZCWM
Variable data supplied by: CZCWM
Nes:sage residence: CZCWM
CZCWO-I021-9001 DDNAJYlE ddname, DSNAME dsname.
ATTEMPT TO OPEN DCB ON DDNAME WHICH HAS A DCB
CURRENTLY OPENED
Explanation: The DCB open count (field 'l'DTOPN
of the JFCB) is not zero, indicating that a
DCB is already open for the data set in the
JFCB.
An additional DCB cannot be opened on
the same JFCB, at. the same time.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCWO
Variacle data supplied by: CZCWM
Message residence: CZCWM
Requirement determined by:
Variable data supplied by:
Message residence: CZCWM
CZCWO
CZCWM
CZCWO-1023-9019 DDNAME ddname, DSNAME dsnarne.
INVALID VOLUME (SUBPARAMETER - VOLSEQNO)
SPECIFICATION IN DATA DEF.
Explanation: The volume sequence number
specified in the DDEF statement, volume
field, is out of range of the volumes
corrprising the data set.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCWO
Variable data supplied by: CZCWM
Message residence:
CZCWM
CZCWO-l025-9008 DCB MACRF SPECIFICATION CONFLICTS
WITH OPTION 1 OF OPEN
Explanation: DCB MACRF indicates that writes
are to be done on a data set being opened
for INPUT or RDBACK, or specifies that reads
are to be done of data set being opened for
OUTPUT.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by:
CZCWO
Variable data supplied by: CZCWM
Message residence:
CZCWM
CZCWO-3824-901A CDNAME ddname, DSNAME dsname.
INVALID DEVICE TYPE IN JFCB OR DCB AND JFCB DEVICE
TYPE CONFLICT
Explanation: CZCWO has discovered that the
device type specified in the JFCB is net a
tape or direct access device, or that the
device specified in the DCB is not the same
as that in the JFCB.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCWO
Variable data supplied by:
CZCWM
l'1essage residence: CZCWN
CZCWO-3826-901F BDNAME ddname, DSNAME dsname.
VOLUME I-iOUNT IS INDICATED IN Jr'CB
NO
Explanation: None of the volume serial fields
in the JFCB have the mount flag on. A
volume must be mounted to enable the JFCE to
contain an SCAT pointer for the device
allocated to the data set.
Completion Code:
01
Beference Data (Also see Appendix B-03.)
Neguirement determined by:
CZCWo
Variable data supplied by: CZCWM
Message residence:
CZCWM
CZCWO-I022-9007 DATA DEF DISPOSITION/SUBPARAMETER
- STATUS - CONFLICTS WITH OPT 1 OF OPEN
The disposition (NEW) specified
in the JFCB does not agree with the open
option; e.g., NEW/INPUT, NEW/INOUT,
NEW/RDBACK, NEW/UPDATE.
Completion Code:
01
Reference Data (Also see Arpendix B-03.)
~.£!anation:
88
CZCWO-3827-903C SAM INTERNAL PROGRAMMING ERROR,
MODULE *XXXXX., RC=XXXXXXXX
Explanation: An invalid return code was
received from another internal SAM module.
Completion Code: 01
Reference Data {Also see Appendix B-03.}
Requirement determined by:
Variable data supplied by:
Message residence: CZCWM
CZCWO
CZCWM
variable data supplied by:
Message residence: CZCWP
CZCWP
CZCWR-22Cl-100D DDNAME ddname , DSNAME dsname.
ERROR ENCOUNTERED IN READING DSCB -- CZCFOl
CZCWP-ATTEMPT TO BACKSPACE PAST LOAD POINT
Explanation: A discrepancy was found between
the tapemark count in the SDAT and the
physical position of the tape Which would
cause the tape to be moved back past load
point.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCWP
Variable data supplied by: CZCWP
Message residence: CZCWP
CZCWP-ATTEMPT TO OPEN DATA SET PAST LAST FILE
Explanation: For Read open, an attempt was
made to position past the last non-null data
set. For Write Open, an attempt was made to
position two or more files past the last
complete file.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCWP
Variable data supplied by:
CZCWP
Message residence: CZCWP
CZCWP-HIT LOAD POINT ON BACKSPACE
Explanation: After computation of the tape
pOSition required, an attempt to position
the tape caused a backspace into the load
point. This was caused by a discrepancy
between the tapemark count in the SDAT and
the physical position of the tape.
Completion Code:
01
Reference Data (Also see Appendix a-03.)
Requirement determined by: CZCWP
Variable data supplied by: N/A
Message residence: CZCWP
CZCWP-POSITION CODE FOR TAPE IS NOT 1, 2, OR 3
Explanation: The SAM module calling CZCWP has
not set the position parameter in the SCB.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCWP
Variable data supplied by: N/A
Message residence: CZCWP
CZCWP-3B04-B03A DDNAME data definition name,
DSNAME data set name. CNTRL ERROR OCCURRED WHILE
POSITIONING TAPE.
Explanation: An error return code is indicated
from Control (CZCRB) when attempting to
position the tape. After CZCWP determined
from the SCB the position to which the tape
was to be set, a CNTRL macro instruction was
issued to position the tape. The attempt to
position the tape was unsuccessful,
producing this error condition.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCWP
Explanation: OBTAIN portion of OBTAIN/RETAIN,
module CZCFO, has returned with an error
return code indicating that the format-3
OSCB requested cannot be read without error.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCWR
Variable data supplied by: CZCWM
Message residence: CZCWM
CZCWT-I044-B030 DDNAME data definition name,
DSNAME data set name. USER ELECTED OPTION TO
TERMINATE •
.Explanation: The user has chosen to terminate
processing, due to a discrepancy between the
device type and the DCB tape indicator.
Upon finding that the device assigned is a
7-track, tape device and the DCB indicated
that a 9-track tape is desired, the user
receives a message indicating the
discrepancy. If the user elects to
terminate processing. this abnormal
termination results.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCWT
Variable data supplied by: CZCWT
Message residence: CZCWT
CZCWT-3841-100F DDNAME ddname, DSNAME dsname.
ERROR ENCOUNTERED IN MOUNTING VOLUME -- CZCAB1
Explanation: BUMP. module CZCAB, has returned
with an error code indicating that the
requested volume request cannot be
completed.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCWT
Variable data supplied by: CZCWM
Message residence: CZCWM
CZCWT-3842-102D DDNAME ddname, DSNAME dsname.
VOLUME SERIAL FIELD OF VOLUME TO BE PROCESSED IS
NULL AFTER VOLUME MOUNT
Explanation: Return from BUMP, module CZCAB,
did not indicate an error. However, the new
volume to be processed is a null field in
the JFCB. The valid flag of the volume
serial field for the volume is not on.
completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCWT
Variable data supplied by: CZCWM
Message residence: CZCWM
CZCWY-DDNAME ddname. DSNAME dsnarne.
OCCURED READING HEADER LABELS
AN I/O ERROR
Explanation: After standard error recovery
procedures. a data set header label could
not be read without error. Either a bad
Part III:
Abnormal Task Termination Messages
89
tape was encountered, or the beginning of a
tape was hit when reading backward.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCWY
Variable d2ta supplied by: CZCWY
Message residence:
CZCWY
CZCWY-DDNAME ddnane, DSNAME dsnane.
OCCURRED READING TRAILER LABELS
AN I/O ERROR
Explanation: After standard error recovery
procedures, a data set trailer label could
not be read without error.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by:
CZCWY
Variable data supplied by: CZCWY
Message residence: CZCWY
Variable data supplied by:
~essage residence:
CZCWY
CZCWY
CZCWY-DDNAME ddname, DSNAME dsname.
ERROR TRYING
TO REAC TRAILER LABELS OF PREVIOUS FILE, OR lABEL
NOT EOPl
Explanation:
During open processing for an
output data set, the trailer label of the
previous file could not be read without
error after standard error recovery
procedures, or the label was not an EOF1
latel.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by:
CZCWY
Variable data supplied by: CZCWY
Message residence: CZCWY
CZCWY-DDNAME ddname, DSNAME dsname.
LABEL READ IN HEADER LABEL GROUP
CZCWY-DDNAME ddnarne, DSNAME dsname.
AN I/O ERROR
OCCURRED READING USER label type LABEL
Explanation: After standard error recovery
procedures, a user header or user trailer
.label could not be read without error.
Completion Code:
01
Reference Data (Also see Ar:pendix £-03.)
Requirement determined by: CZCWY
Variable data supplied by: CZCWY
Message residence:
CZCWY
CZCWY-DDNAME ddnawe, DSNAME dsname.
AN I/O ERROR
OCCURRED WRITING LABEL WITH ID label id
Explanation: A write error remains after
standard error recovery ~rocedures have
failed to recover.
The specified data set
or user label could not be written.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCWY
Variable data supplied by: CZCWY
Message residence:
CZCwY
CZCWY-DDNAME ddnarr:e, DSNA!vlE dsname.
Nf'I'EMPT TO
WRITE HEADER LABELS IN EN[:-OF-TAPE REGICN - FILE 1
Explanation: The end-of-tape reflector has
been detected while the user header labels
for file sequence number one are still being
writt,en.
completion Code:
01
Reference Data (Also see Apr:endix £-03.)
Requirement determined by: CZCWY
Variable data supplied by: CZCWY
Message residence:
CZCWY
CZCWY-DDNAME ddnaroe, DSNAME dsname.
ERROR
OCCURRED IN USER PROMPTER (CZATJ) OR ATTENTION
RECEIVED
Explanation! Either the user prompter failed
to complete its task, or an attention
interrupt. was received during its
processi ng •
Corrpletion Code: 01
Reference Data (Also see Appendix £-03.)
Requirement determined by: CZCWY
90
NON-STANCARC
Explanation: During the processing of data set
header labels, either a tapeFark has been
encountered or a record has been read that
is not a standard label (i.e., the first
three characters of the record are not VOL,
HCR, EOF, EOV, UHL, or UTL.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCWY
Variable data supplied by:
CZCWY
Message residence: CZCWY
CZCWY-I:DNAME ddnarne, DSNAME dsname.
LABEL READ IN TRAILER LABEL GROUP
NON-STANDARI:
Explanation: During the processing of data set
trailer labels, either a taperrark has been
encountered or a record has teen read that
is not a standard label {i.e., the first
three characters of the record are not VOL,
HCR, EOP, EOV, UHL, or UTL.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Kequirement determined by:
CZCWY
Variable data supplied by: CZCWY
Message residence:
CZCWY
CZCWY-DDNA~E ddname, DSNAME dsnarr.e.
OPTION TO TERMINATE
USER ELECTEL
~xplanation:
After being inforrred that seme
discrer:ancy exists between the data set
latels and information supplied in the DCB
or JFCB, the user elected to terminate
processing.
CemFletion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by:
CZCWY
Variable data supplied by:
CZC~Y
Message residence: CZCWY
CZCX]::-0121-1023 DDNAl'1E ddname, DSNAME dsname.
REQUEST FOR PUBLIC EXTERNAL STORAGE DENIED
Explanation: At end-of-volume time on a direct
access data set residing on public external
storage, an attempt to obtain additional
storage for the data set was rrade, and the
request was denied by external storage
all.ocation.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCXD
Variable data supplied 1:y: CZCWM
Message residence: CZCWM
CZCXD-0927-100E DDNAME ddname, DSNA~E dsname.
ERROR ENCOUNTERED IN WRITING DSCB -- CZCF02
Explanation: RETAIN portion of OBTAIN/RETAIN,
module CZCFO, cannot write the DSCE
requested without error and has returned
with an error return code.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCXD
Variable data supplied by:
CZCWM
Message residence: CZCWM
CZCXD-0928-100F DDNAME ddname, DSNMAE dsname.
ERROR ENCOUNTERED IN MOUNTING VOLUM~ -- CZCAB1
Explanation: BUMP, module CZCAB, has returned
with an error return code, indicating that
the requested volume mount cannot be
completed.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by:
CZCXD
Variable data sUPFlied by:
CZCWM
Message residence:
CZCWM
CZCXD-3922-1022 DDNAME ddname, DSNAlVE dsname.
PUBLIC REQUEST SrlOULD HAVE BEEN SATISFIED BUT JFCB
VOLUME FIELD IS NULL
Explanation: Return from external storage
allocation indicated that a request for
public storage was satisfied, cut the volume
serial field valid flag is fiot cn.
Corrpletion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined i::y:
CZCXL
Variai::le data supplied by: CZCWM
Message residence: CZCWM
CZCXD-3923-0924 DDNA~£ data definition name,
DSNAttE data set name. RELATIVE SEQ OF VOLUME TO
BE PROCESSED IS INVALID--CZCAB OR CZCEX ERROR.
Explanation: CZCXD called CZCWV, which
exarr,ined the volurre serial numcer and found
it outside the range of valid serial
nw[,bers.
This abnormal tern'ination
condition and a system errOl: result.
There
is a possible BUMP extension error.
Corrpletion Cede: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by:
CZCXD
Variable data supplied ty:
CZCXD
l-'essage res idence: CZCXD
CZCXD-3924-0926 DDNAME data definition name,
DDNANE data set name. SUCCESSFUL PUBLIC
ALLOCATION ON PRIVATE DATA SET
Explanation: CZCEX is returning a code
indicating that the space requested was
allocated on a new public volume. CZCXD
requires additional space for a data set.
This space must be on the volume that is
currently mounted. If the space is
allocated on another voluroe, a system
error and abnormal termination occur.
completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCXD
Variable data supplied by: CZCXD
Message residence:
CZCXD
CZCXD-3929-092C DDNAME data definition name,
LSNAME data set name.
UNSUCCESSFUL PRIVATE
ALLOCATION ON PUBLIC DATA SET.
Explanation: CZCEX is called to allocate space
on a public volume, and returns a code
indicating that the request was denied.
ComFletion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by:
CZCXD
Variable data supplied by: CZCXD
Message residence:
CZCXD
C2CXE-00A1-1006 DDNAME ddname, DSNAME dsname.
AND DEB ARE NOT PROPERLY LINKED
LCB
Explanation: The DCB provided by the parameter
in the CLOSE macro does not pOint to a valid
DEP or points to a DEB that points to
another DEB.
Ccmf'letion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCXE
Variable data supplied by: CZCWM
Message residence: CZCW~
CZCXE-38A2-1004 DDNAME ddname, DSNAME dsname. A
JFCB VOLUME SERIAL FIELD HAS THE MOUNT FLAG ON AND
VALID FLAG OFF
Explanation: The flags byte of a volume serial
field in the JFCB indicates a null volume is
mounted.
Only a valid voluRe serial can be
rrarked mounted.
Com~tion Code:
01
Reference Data (Also see ApIJendix B-03.)
Requirement determined by: CZCXE
Variable data supplied by: CZCWM
~essage residence:
CZCWM
CZCXE-3827-103C SAM INTERNAL PROGRAMMING ERROR,
MODULE *module id*, RC = value.
Explanation:
Module id indicates the lI'odule
which generated the invalid return. Value
is the contents of register 15 when the
error was detected.
A SAM lfcdule has
returned to anot.her SAM rr'odule with an
invalid return code.
Completion Code:
01
Reference Data (Also see Appendix B-O 3. )
Requirement determined by: CZCXE
Variable data supplied by: CZCWM
r":essage residence: CZCWM
CZCXI-0906-100F DDNAME ddnaIl'e, DSNAME dsname.
ERROR £NCOUNTERED IN MOUNTING VOLUME--CZCAB1-Part III:
Abnormal Task Termination Messages
91
Explanation: A requested volume could not be
mounted properly.
CZCXI calls BUMP to
request mounting a required volume. If BUMP
returns a code indicating mounter request in
error, this abend will result.
Corrpletion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement. determined by: CZCXI
Variable data supplied by: CZCXI
Message residence:
CZCXI
CZCXN-1A42-1011 DDNAME ddname. DSNAME dsname.
ERROR ENCOUNTERED IN READING USER LABELS -- CZCF01
Explanation: OBTAIN portion of OBTAIN/RETAIN,
module CZCFO, has returned with an error
return code indicating that the requested
user label cannot be read without error.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCXN
Variable data supplied by: CZCWM
Message residence: CZCWM
CZCXI-1903-100A DDNAME ddnarne, DSNAME dsnarne.
DATASET PREVIOUSLY OPENED BUT NOT CLOSED--PREVIOUS
SYSTEMS ~ALFUNCTION.
Explanation: After OB'TAIN was called to read a
DseB, the DSCB integrity tit was set. A
message indicating this condition is sent to
the user who decides whether to continue.
His response determines whether or not the
abend is issued.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: C~CXI
Variable data supplied by: CZCXI
Message residence: CZCXI
CZCXI-2101-100D DDNAME ddnaJIe, DSNAME dsname.
ERROR ENCOUNTERED IN READING DSCB -- CZCF01
Explanation: OBTAIN portion of OBTAIN/RETAIN,
module CZCFO. cannot read the requested DSCB
without error and has returned with an error
return code.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
.
Requirement determined by: CZCXI
Variable data supplied by: CZCWM
Message residence:
CZCWM
C:':;CXI-2102-100E DDNAME ddnarne, DSNAME dsname.
ERROR ENCOUNTERED IN WRITING DSCB -- CZCF02 -RETAIN portion of OB~AIN/RETAIN,
module CZCF'O, returned an error return code
indicating that the requested data set
control block cannot be written without
errors.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by' CZCXI
Variable data supplied by: CZCWM
Message residence:
CZCWM
CZCXN-3A41-1015 DDNAME ddname, DSNAME dsnarne.
EXIT CODE IN SCBEXT NOT EQUAL TO 1 OR 3 FOR INPUT
USER LABELS.
Explanation: A SAM module has not set the
SCBEXT field of the SCB to indicate whether
header or trailer labels are being
Frccessed.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCXN
Variable data supplied by: CZCWM
Message residence: CZCWM
CZCXO-38E1-B003 DDNAME ddname, DSNAME dsname.
ADDITIONAL VOLUME REQUIRED FOR OUTPUT IS NOT
AVAILABLE
Explanation: An error return code from CONVERT
(CZCWV) indicates that the volurre sequence
nurrber is out of range of the JFCB.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCXO
Variable data supplied by: CZCWM
Message residence: CZCWM
CZCXO-38E3-BOOF DDNAME data definition name,
DSNAME data set name. ERROR ENCOUNTERED IN
~OUNTING VOLUME -- CZCABl --
~lanation:
CZCXI-3907-102E DDNAl-'E ddname, DSNAME dsname.
VALID VOLUME SERIAL FIELD CANNOT BE FOUND IN JF'CB.
BUNP mounted a volume with the
VOLSER flag in the JFCB off, indicating
invalid or null volume. After DUMP is
called to If,ount the desired volume, a flag
in the JFC13 istested to determine whether
the volume serial number is valid.
If not,
this abend results.
Completion Code: 01
Hefer€nce Data (Also see Appendix B-03.)
Rtquirernent determined by: C7.CXI
Variable data sUfplied by: CZCXI
Message residence: CZCXI
~lanation:
92
Either of the following
conditions is possible:
(1) While creating
a data set, insufficient space was available
on the current voluIrie lend-of-tape was
reached), ~ut no more volumes are availa~le;
(2) an error occurred during the mounting of
the volurr,e.
CcmEleticn cod~: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCXO
Variable data supplied by: CZCW~
Message residence: CZCWM
~lanaticn:
CZCXS-0941-100r; DDNN1E ddname, DSNAME dsname.
ERROR ENCOUNTERED IN READING DSCB -- CZCFOl -Explanation: OBTAIN portion of OBTAIN/RETAIN,
module CZCFO, cannot read the requested DSCB
without error and has returned with an error
return code.
CCITif-letion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCXS
Variable data supplied by: CZCWM
I'lessage residence: CZCWM
CZCXS-0942-100E DDNAME ddname, DSNAME dsname.
ERROR ENCOUNTERED IN WRITING DSCE -_. CZCF02 -Explanation: RETAIN portion of OBTAIN/RETAIN,
module CZCFO, cannot write the DSCE
requested without error and has returned
with an error return code.
Completion Code:
01
Reference Data (Also see A~pendix B-03.)
Requirement determined by:
CZCXS
Variable data supplied by: CZCWM
l>lessage residence: CZCWM
CZCXS-0943-9010-error encountered in writ.ing file
mark
Explanation: The check of the write operation
for writing the file mark indicated a
completion with an error.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCWM
Variable data supplied by:
N/A
Message residence:
CZCWM
CZCXS-0944-1014 DDNAME ddnarre, r::SN."-ME dsname.
WRITE OPERATION INTERCEPTED 50 TI~ES
Explanation:
An attempt to write a file mark
on a direct access device has been
intercepted 50 times.
Corr,pletion Code:
01
Reference Data (Also see AFpendix B-03.)
Requirement determined by: CZCXS
Variable data supplied by:
CZCWM
Message residence:
CZCWM
CZCXT-ERROR OCCURR£D IN PROCESSING END CF
VOLUME/l:.ND OF DATA SET
Explanation: While reading ahead for the
second tape mark to determine whether end of
volume has been reached, wore than ten
interceptions of the READ request occurred.
Completion Code:
01
Reference Data (Also see Appendix 8-03.)
Requirement determined by: CZCXT
Variable data supplied ty:
N/A
Message residence:
CZCXT
CZCXT-38C1-B025 SEQUENCE OF NiXT VOLUME '1'0 BE
PROCESSED IF LESS THAN JFCB VCLU~E SEQ
Exr;lanation: The number of the volUlN= to be
processed is less than the task data
definition table voluIT;e sequence number in
the JFCB (job file control block) for that
task.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCWM
Variable data supplied by:
N/A
r.:essage residnece:
CZCWM
CZCXT-38C2-100F DDNAME ddnarne, r::SNAME dsname.
ERROR ENCOUNTERED IN MOUNTING VOLUl'E -- CZCAB1
:t.xplanation:
BUMP, module CZCAE, has returned
with an error return code indicating that
the requested volume rrount cannot be
completed.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCXT
Variable data supplied by: CZCWM
Message residence: CZCWM
czcxU-2262-1013 DDNAME ddname, DSNAME dsname.
ERROR ENCOUNTERED IN WRITING USER LABELS -- CZCF02
Explanation: RETAIN portion of OBTAIN/RETAIN,
module CZCFO, has returned with an errcr
return code indicating that the requested
user label cannot be written without error.
ComFletion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by:
CZCXU
Variable data supplied by: CZCWM
Message residence:
CZCWM
CZCXU-2263-1013 DDNAME ddname, DSNAME dsname.
ERROR ENCOUNTERED IN WRITING USER LABELS -- CZCFo2
Explanation: RETAIN portion of OBTAIN/RETAIN,
module CZCF'O, has returned with an errcr
code indicating that the requested user
label cannot be written without error.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCXU
Variable data supplied by:
CZCWM
Message residence: CZCWM
CZCXU-3A61-1016 DDNAME ddname, DSNAME dsname.
EXIT CODE Hi SCBEXT NOT EQUAL TO 2 OR 4 FOR OUTPUT
USER LABELS.
Explanation: A SAM module has not set the
SCBEX'[' field of the SCE to indicate whether
header or trailer labels are being
[rocessed.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by:
CZCXU
Variable data supplied by: CZCWM
Message residence:
CZCWM
CZCYG03 'IERMINAL FAILS TO DISABLE.
Explanation: TA~ CLOSE has detected a failure
during an attempt to disable a terminal.
Completion Code: 02
Reference Data (Also see ApFendix B-03.)
Requirement determined by: CZCYG
Variable data supplied by:
N/A
Message residence: CZCYG
CZCYG04 RESET OF SAD ORDER HAS FAILED.
Explanaticn: TAM CLOSE has failed in its
attempt to restore the line to tne terrrinal
control it was originally associated with.
Completion Code:
02
Reference I:ata (Also see Apfendix B-03.)
~equirement determined by:
CZCYG
Variable data supplied by:
N/A
Message residence: CZCYG
Part IL[:
Abnormal Task Termination Messages
93
CZCYG05
2702
FAILS TO ENABLE ON DEDICATED LINE.
Explanation: System error processor message
081302509 immediately preceded this abnormal
task termination.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCJT
Variable data supplied by:
N/A
~essage residence:
CZCJT
Transmittal technique: call to ABEND
Routine
~lanation:
TAM CLOSE has detected an error
while trying to enable a dedicated line.
Completion Code:
02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCYG
Variable data sUFFlied ty:
N/A
Message residence:
CZCYG
CZCYG06
LINE.
FAILURE IN PREPARE ORDER FOR DEDICATED
DATA SET SHARED - NOT OPENED FOR OUTPUT
Explanation: The user is atterr.Fting to dc a
fut on a shared data set that was not opened
with an option of OUTPUT or OUTIN.
!Completion Code:
02
Reference Data (Also see Appendix B-03.)
Requirement determined by:
CZCPA
Variable data sUFplied by: N/A
~essage residence:
CZCPA
~xplanation:
TAM CLOSE has detected an error
wnile executing a prerare order to a
dedicated line.
Completion Code:
02
Reference Data (Also see Appendix B-03.l
Requirement determined by: CZCYG
Variabl e da·ta supplied by: N/A
Message residence: CZCYG
CZCYG07
2702
FAILS TO ENABLE ON DIAL LINE.
DATA, INPUT ERROR. NONCONVERSATIONAL TASK
TEl ,
reading the VTOC and format-l data set
control blocks (DSCBs).
A ret_urn code other
than 0 or 8 from OBTAIN causes system error
processor message 080303103 and this
Explanation: 'l'he task has been arnorIfally
terminated with a corr,pletion code of 2
because the character translation table
address is Unassigned or the table is
located in a read/write restricted area.
Completion Code:
02
Re.!:erence Data (Also see Appendix E-03.)
Part III:
Abnormal Task Termination Messages
97
Requirement deterwined by:
Variable data supplied by:
Message residence:
CZATC
Message issued by: CZATC
CZATC
N/A
GATE MACRO 'IYPE CODE NOT A VALUE 1- 5 FROBLEM
USUALLY CAUSED BY INVALID PSECT OR CSECT COVER.
Explanation:
GATE has gone to the user
location pointed to by the first parameter
in the parameter list to get a code value to
determine the type of operation GATE is to
perform. The value in this location is not
valid.
Corepletion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZATC
Variable data supplied by: N/A
Message residence:
CZATC
GATE RC INVLD
Explanation:
Invalid return code from GATE.
Completion Code,
01
Reference Data (Also see Appendix £-03.)
Requirement det_ermined by:
CYACU
Variable data supplied by: N/A
Message residence:
CFACB
GA'l'RD HC OR FORf.'AT KEY IWILC
Explanation:
Return cede frem GATE is invalid
or unaccertable; or the keyboard/card key of
record is invalid~
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement det.ermined by:
CFALA
Variable data supplied by:
N/A
Nessage rei idence:
CFADA
Reference Data (Also see Appendix B-03.)
Requirement determined by:
CZCME
Variable data supplied by:
N/A
Message residence:
CZCME
IHE0091 ABEND-INTEhRUPT IN PL/I
DU~P
Explanation: An unrecoverable interrupt
occurred during the mapping of PL/I save
areas.
This condition occurs when the
chaining of PL/I save areas has been
destroyed, resulting in protection
interrupts. This may be caused by an
erroneous PL/I source program, such as
SUCSCRIPTRANGE or STRINGRANGE conditions.
ComEletion Code:
02
Reference Data (Also see Appendix B-03.>
Requirement determined by:
IHEWDUM or
IHEWZZC
Variable data supplied by:
N/A
Message residence:
IHE0091
IHE8551 ABEND-INTERRUP'l' IN PL/I ERROR HANDLER
~lanation:
A second-level prcgrarr, interrupt
has occurred while module IllEWERR is trying
to handle a first-level prograrr interrupt.
A user program has malfunctione~, causing
the first program interrupt.
Wlnle IHEWERR
is handling this interrupt, a second prcgram
interrupt can occur, due to save areas being
overwr i tten as a result of the PL/ I liJ::rary
ffiodules being user-programs themselves.
Since registers and save areas are now
unreliable, the USE'I will be !f,uch safer with
a completely new copy of his Virtual merrcry.
CcmFletion Code:
02
Reference Dat:a (Also see Appe.ndix E-03.)
Requirement determined by:
IHE885I
Variable data supplied by:
N/A
Message residence:
IHE885I
GATWR HC INVLD
Explanat_ion:. Invalid return code from GATE.
Completi0!l__ cod~.
01
Reference Data (Also see Appendix B-03.)
-. Requirem"(.,nt determined by: CFALA
Variable data supplied by:
N/A
Message residence:
CFADA
GET ISSUED
AFTE~
INCO~PLETE
FINISH -
ILLEGAL COMPLETION CODE IN DECE
See message text.
Code:
01
"efe.rence Data (Also see Appendix B-03.)
;~equ irement_ determined by:
CZCRC
Variable data supplied by:
N/A
Message residence:
CZCRC
Explanation~
~_9mfletion
CZCME
~xplanation:
The CCBFIN flag is on, indicating
FINISH just completed, but CEBIOC. the
number of IORCBs outstanding, is nonzero.
It. appears that SO!f,eone turned on the DCSFIN
flag illegally.
Completion C~de:
01
~eference Data (Edso see Apper,dix 8-03.)
.Requirement det.ermined by:
CZC]\IE
Varia!::le dat.a :3uPLjlied by: N/A
~~e.ssa'ge residence:
CZCi.':E
ILLEGAL CONTROL OPERATION
~xFlana~ion~
Register 0 contains an illegal
control operation when CONTROL is entered.
ccg:~tion_Code:
01
Reference Data (Also see Appendix E-03.)
,~equirement determined by:
CZCRE
Variable data supplied by:
N/A
~essage residence:
CZCRB
ILL.i:.Gl\L .cENSITY
GET/PUT ISSUED AFTER PERlVl I/O ERROR - CZCME
Explanation:
A GET or PUT instruction was
is::;ued for a device after FINISlJ had been
issued for the device, and the device had
bEc'en masked f or renT-anent error (DEBNF2 on).
_C~~.rletion co_~~:
98
01
Explanation: User's DCB r'equests other than
200, 556, or 800 BPI (bits per inch)
density.
~S!!lEletion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCRA
Variable data sUPFlied by:
Message residence:
CZCRA
INSERT OF PAGE REQUIRED WHICH EXCEEDS DATA SET
LIMITS
N/A
ILLEGAL DEVICE TYPE IN DEB
Explanation: See message text.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCRA
Variable data supplied ty:
N/A
Message residence:
CZCRA
IMP. DL RECEIVED AND ALL OR SOME INTS.
DISABLED
Explanation: system error processor message
081302500 irrmediately preceded this abnormal
task terminaticn.
Completion code:
02
Reference Data (Also see AFpendix B-03.)
Requirereent determined l::y:
CZCJT
Variable data supplied by: N/A
Message residence:
CZCJT
Transmittal technique: Call to ABEND
Routine
INPROPER HANDLING OF STATE AND !>lODE BY .PERMIT
Explanation:
System error Frocessor message
050505704 irrrnediately preceded this abnormal
termination of the task.
Completion Code:
02
Reference Data (Also see Appendix £-03.)
Requirement determined i:y:
CZAFH
Variable data sUPFlied i:y:
N/A
Message residence:
CZAFH
INCORRECT COMP CODE-ABEND
Explanation: ABEND was called with an invalid
completion code.
Completion Code:
02
Neference Data (Also see Appendix B-03.)
Requirement determined by: CZACP
Variable data supplied by:
N/A
Message residence:
CZACP
INCORRECT USER PRIVILEGE CLASS
Explanation: A user not haVing privilege class
E has invoked CZATB (the OLTS posting
routine) or CZATG (the OLTS device
allocation routine). This is illegal.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by:
CZATB or CZATG
Variable data supplied by: N/A
Message residence: CZATB and CZATG
INPUT DATA SET-WRITE REQUEST ILLEGAL
Explanation: User attempted to issue a write
to an input data set.
Completion Code:
01
Reference Data (Also see A~pendix b-03.)
Requirement determined by:
CZCRA
Variable data supplied by: N/A
~essage residence:
CZCRA
Explanation: Attempting to insert a page that
is beyond the extent of the data set.
Completion Code:
02
Reference Data (Also see Appendix B-03.)
Requirement determined by:
CZCPI
Variable data supplied by: N/A
Message residence:
CZCPI
INSUFFICIENT VM TO FULFILL REQUEST.
Explanation: The request for virtual memory
(bytes or pages) is too large for any
reH,aining available pages. The user did not
specify the EXIT = RETURN opticn.
ComFletion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCGA
Variable data supplied by:
N/A
!o'essage residence: CZCGA and CZCHA
(error code) -- (module name) INVALID CATALOG DA'lA
DETECTED WHILE PROCESSING DSN=(data set name)
Explanation: An error dealing with catalog
structure was detected by one of the catalog
service routines (module name in above
message). The catalog error Frocessor
(CZCFE) was called to claim a SYSER, and
possibly an ABEND.
The error code indicates
the type of error that was detected.
A
rressage describing the type and location of
the error will be written to SYSLOG.
Condition Code:
01
Reference Data (Also see Appendix B-03.)
Requirement detendned by: Module name
sUFplied in message
variable data supplied by:
Module narr.e
supplied in message
INVALID CCW SEQUE'NCE FOR DIRECT ACCESS DEVICE
Explanation: A test program has requested
execution of a chain of CCWs to a direct
access device, and the chain violates the
ground rules estal:;lished for OLTS.
The
offending test proqram should l:;e rerroved,
and the task restarted.
Completion Code:
01
ReferEnce Data (Also see Appendix B-03.)
gequirernent determined by: CZATA
Variable data supplied by:
N/A
~essage residence:
CZATA
INVALID CODE FRO¥. A CALLED ROUTINE
EXplanation: System error processor message
050203001 or 050203002 immediately preceded
this abnormal termination of the task.
Comfletion COdE: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZABF
Variable data supplied by: ~/A
Flessage residence: CZABF
INVALIL COl'CPUTATION OF NUMBER CF DIRECTORY PAGES
Explanation: The computed number cf pages to
initialize the end of directory was not an
integer.
Fart III:
Abncrmal Task Termination l'jessages
99
Completion Code:
02
Reference Data (Also see Appendix B-03.)
--~guirement determined by:
CZCPL
Variable data supplied by:
N/A
Message residence:
CZCPL
CZCMB, or CZCNA
Variable data supplied by:
N/A
Message residence:
CZCLA, CZCLB, CZCMB, and
CZCNA
2. EKElanaticn:
INVALID DATA IN CSECT OF CZCTA RTN.
~lanatiqft~
See message text.
Completion Code:
01
R~ference Data (Also see AFpendix B-·03.)
Requirement determined by:
CZCTA
Variable data supplied by: N/A
Message residence: CZCTA
The identifier in the DCB to be
not *%*%.
Ccm£letion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by:
CZCSC
Variable data supplied by:
N/A
r~€ssage residence:
CZCSC
- opened---rs
INVAl.ID DECB, DCB, OR DEB
(error code) -- (module name) INVALID DATA SEl'
USER INFORMATION FOR CATALOG SERVICE ROUTINE.
l"QN= (data set name)
El.xplanat.ioIl: The cat.alog error processor
(CZCFE) was called to execute an ABEND by
one of t.he catcalog service routines (module
name indicated in above message), but CZCFE
parameter list does not contain a point.er t_o
ABEND.
As a result, the standard message
shown atove will be sent to the ue>er.
Condition Code:
01
Reference Dat~ (Also see Appendix B-03.J
Requirement determined by: Module name
supplipd in message
Variable data supplied by:
Module name
supplied in rressage
INVALID DCIl/DEB Tn - CZCME
gp..1anatiOll.=.. After register initialization, in
a GET or PO'l' operation, tche DCB ana DEB
identifiers are checked for validity. This
at:end occurs when the DCBID is not *%*%, er
when the DeBDEB painter points to an invalid
DEB, since DEBIE is not *f.
Conpietion Code:
Ot
ReferenceDai:a('Also see Ar:;pendix 8-03.)
Requi rement_ determined ty:
C2C1>(E
Variatle data supplied by: N/A
MEssage residence:
CZCME
INvl',JoID DCB IDENTIFIEH
:§~lan'SNG PARAM
Ex~lanation:
A required pararreter was missing
(issued for nonconversational task only).
COIDEletion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CFADA
Variable data supplied by: N/A
Message residence: CFADA
1. Explanation:
106
NCP EXCEEDED
Explanation: User has issued !fore I/O
reguests, without corresponding CHECKS, than
specified ry his NCP parameter in the DCB.
Completion code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCRA
Variable data supplied by:
N/A
Message residence: CZCRA
COIDEletion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZAFN
Variab~e data supplied by:
N/A
Message residence: CZAFN
NEXTPAR RETURN CODE INVALID
Explanation: System error processor message
050506002 immediately preceded this abnormal
termination of the task.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZAFK
Variable data supplied by: N/A
Message residence: CZAFK
NO DATA CONVERTER ON TAPE UNIT
Explanation: User's DCB s~ecifies 7-track tape
with data converter feature; SDAT indicates
tape unit does not have converter.
completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCRA
Variable data supplied by:
N/A
Message residence:
CZCRA
NO JFCB FOUND FOR USER TABLE.
1. Explanation:
System error processor message
050506211 immediately preceded this abnormal
termination of the task.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZAFM
Variable data supplied by: N/A
Message residence: CZAFM
2. Explanation: System error processor message
080302803 immediately preceded this abnormal
task terminaticn.
Completion code: 02
~eference Cata (Also see Appendix B-03.)
Requirement determined by: CZCEX
Variable data supplied by:
N/A
Message residence: CZCEX
NO MOUNTED VOLUME INDICATED BY JFeR
Explanation: After register initialization,
ALLOCATE tests to determine whether the
volumes in the job file control block (JFCB)
are mounted and if the valid indicator for
each voluu,e is on. If the private volume
valid indicator in the FJCB is found to be
off, indicating an invalid VOlume, system
error processor message 080302501 results,
followed by this abnormal termination.
comp~etion Code:
02
Reference Data (Also see AH~endix B-03.)
Requirement deterffined ty: CZCEA
Variable data supplied by: N/A
l
Requirement determined by: CZCPE
Variable data supplied by:
N/A
Message residence:
CZCPE
RECORD LENGTH EXCEEDS MAXIMUM SPECIFIED IN
DCBLRECL
Explanation: User has done a locate mode PUT
and moved a record with a length greater
than the maximum that he specified at OPEN
time.
This could cause overlay of other
records or record locators.
Completion Code:
02
Reference Data (Also see AFpendix B-03.>
Requirement determined by:
CZCPA
Variable data supplied by: N/A
Message residence: CZCPA
RECORD LENGTH EXCEEDS 4000 BYTES
Explanation: The record length has exceeded
the maximum.
Completion Code:
02
Reference Data (Also see Appendix B-03.)
Requirement determined by:
CZCPA
Variable data supplied by:
N/A
Message residence:
CZCPA
RENAME WAS CALLED WITH NO MOUNTED VOLUMES
Explanation:
system error processor message
080103401 immediately preceded this abnormal
task terrr~nation.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by:
CZCFZ
Variable data supplied by: N/A
Message residence: CZCFZ
RENAME WAS UNABLE TO BUMP
Explanation: System error processor message
080103402 irrmediately preceded this abnormal
task termination.
Completion Code:
01
Reference Data (Al~o see A~pendix B-03.)
Requirement determined by:
CZCFZ
Variable data su~plied by:
N/A
Message residence: CZCFZ
RESOURCE PROBLEM.
RESPONSE TIME ELAPSED IN NEw TASK
The new task created by an ABEND
completion code 2. Processing did not
receive the reply from a VSEND it sent to
the old abnormally terminated task.
The
task is abnormally terminated.
Completion Code:
02
Reference Data (Also see Appendix E-03.)
Requirement determined by:
CZACR
Variable data supplied by:
N/A
Message residence: CZACR
~lanation:
SCAN RC INVLO
Explanation:
Invalid return code received from
a SCAN package routine.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CFADB
Variable data supplied by:
N/A
Message residence: CFADB
SCAN RC OR DELIM CODE INVLD
Explanation:
Invalid return code or undefined
delimiter code returned from a SCAN package
routine.
Ccmpletion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by:
CFADA
Variable data supplied by: N/A
Message residence:
CFADA
SCRA'ICH .. AS UNABI.E TO BUMP
Explanation: System error processor message
080303202 immediately preceded this abnorlIal
task termination.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCES
Variable data supplied by: N/A
Message residence: CZCES
SECTION CONTROL TABLE HAS BEEN ALTERED BETWEEN
CREA'IION AND USE
Explanation: The OLTS section control table
(SCT) has been altered inadvertently or
rralevolently. This presents a danger to
system security. The offending test program
(or other cause) should be rerroved, and the
task restarted.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZATA
Variable data supplied by:
N/A
Message residence: CZATA
DATA SET CANNOT BE OPENED
SETL BACKSPACE REQUEST FOR UNDEFINED RCDS
Explanation: This is caused by a failure in
RCR OPEN.
OPEN issues RCR OPEN. HCR OPEN
cannot find or create AUL.
Completion Code:
01
Reference Data {Also see Appendix E-03.>
Requirement determined by:
CZCLA
Variable data supplied ry:
N/A
Message residence:
CZCLA
Explanation: A backspace request is not
permitted for forn:at-U (undefined) reccrds.
Ccmpletion Code:
02
Reference Data (Also see Appendix B-03.)
Requirement determined by:
CZCOT
Variable data supplied by: N/A
Message residence:
CZCOT
Part III:
Abnormal Task Termination Messages
109
SETL BY RETRIEVAL ADDRESS FOR SHARED DATA SET
Explanation:
The user tried to do a SETL by
retrieval address on a shared data set.
Completion Code:
02
Reference Data (Also see Appendix B-03.)
Requirement determined by:
CZCPC
Variatle data supplied by: N/A
Message residence:
CZCPC
SYNAL CONDITION ENCOUNTERED - COMPLETION OF FINAL
PUT
SETL REQUEST WITH INVALID PARAMETER
.lcx"lanation:
invalid inf,ut ;.~arameters given to
SETL.
Completion Code:
02
R~ference Data (Also see Appendix E-03.)
Requirement determined ty: CZCOT
Variable data supplied ty:
N/A
Message residence:
CZCOT
SETL WITH ILLEGAL CODE SPECIFIED IN DCB
Explanation: The user attempted a SETL to some
position in a VIS AM data set, but the code
provided in the OCB was not an allowable
option.
Completion Code:_ 02
Reference Data (Also see Appendix B-03.)
Requirereent determined by:
CZCPC
Variable data supplied by:
N/A
Message residence:
CZCPC
SHAREr:: ALLOCATED DIRCTY PGS EXHAUSTED.
EXPANDABLE
EXl~lanation:
A SYNAL condition was snCQUnteLs(].
in PUT, but it was entered from VISAM CLOSE
for completion of the final put.
Due to
inability to restore user's registers an
ABEND is invoked.
Completion Code:
02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCPA
Variable data supplied by:
N/A
Message residence: CZCPA
SYNAD EXIT NULL-SYNAD ERROR OCCURRED
!';2!Elanat~ion:
BSAM posting requests SYNAD, tut
us er has not prov ioeo a SYNAD exit in rCE.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCRB or CZCRC
Variable data supplied by:
N/A
I'Jessase residence: CZCRB and CZCRC
NOT
Explanation:
The initial allocation of
directory pages has been exhausted, and it
is not possible to expand a shared data set.
Completion Code:
02
Reference Data (Also see Appendix B-03.)
Requirement detendned by:
CZCPL
Variable data sup;::lied by:
N/A
Message residence:
CZCPL
(SMALL) VMA UNABLE TO PERFORM FUNCTION REQUESTED.
Explanation:
A system or task limitation or
other error condition has teen detected in
processing a request for virtual memory
allocation or release.
Completion Code:
02
Reference Data (Also see Appendix E-03.)
Requirement determined 1::y: CZCGA or CZCHA
Variable data supplied by:
N/A
Message residence:
CZCGA and CZCHA
STOW RC ABNOHMA.L
Explanation: Abnormal return code received
from STOW macro.
Cowpletion Code:
01
heference Data (Also see Appendix E-03.)
Requirement determined by:
CFADA
Variable data supplied by:
N/A
Message residence:
CFADA
SYMBOLIC DEVICE ADDRESS IN VPSW IS INVALID
1~O
ExPlanation:
System error processor message
081302603 immediately preceded this abnormal
termination of the task.
Syrr.bclic device
address in VPSW points to an invalid entry
in CHBSDA.
ComFletion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by:
CZCJT
Variable data supplied by:
N/A
Message residence: CZCJT
SYSTEM ERROR
1. Explanation: One of system error messages
050102901 through 050102904 immediately
preceded this abnormal terminaticn of the
task.
Completion Code:
02
Reference Data (Also see Appendix B-03.)
Requirement determined ny:
CZAAD
Variable data supplied by:
N/A
Message residence: CZAAD
2. Explanation:
Issued prior to systerr, error
processor messages 050302601 through
050302609.
Completion Code:
02
Reference Data {Also see Appendix B-03.}
Requirement determined by:
CZACB
Variable data supplied by:
N/A
Message residence: CZACB
3. Explanation:
A system error message
irrrrediately preceded this abnormal
termination of the task.
Ccmfletion Code:
02
Reference Data (Also see Appendix B-03.)
Requirement deterrfiined by:
CZAAB
Variable data supplied by:
N/A
Message residence: CZAAB
SYSTEM ERROR - CZACF CALLS ABEND
System error processor message
050303001 immediately preceded this abnormal
task termination.
Ccmr:letion Code:
02
~xplanation:
Reference Data (Also see Appendix E-03.)
Requirement determined by: CZACF
Variable data supplied by: N/A
Message residence: CZACF
SYSTEM ERROR, BUMP.
RDR.
CornFletion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZAEG
Variable data supplied by: N/A
Message residence: CZAEG
INVALID RETURN CeDE FROM LBL
Explanation: System error processor message
080502801 immediately preceded this abnormal
task termination.
completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCAB
Variable data supplied by: N/A
Message residence: CZCAB
SYSTEM ERROR INVALID RETURN CODES
Explanation: Either the user did not want to
create a JFCB, or system error processor
message 050502660 or 050502661 immediately
freceded this abnormal termination of the
task.
Ccmfletion Code: 01
Reference Data (Also see Appendix E-03.)
Requirement determined by: CZAEB
Variable data supplied by: N/A
l~essage residence:
CZAEE
SYSTEM ERROR, BUMP. INVALID RETURN CODE FROM
PAUSE.
Explanation: System error processor message
080502801 immediately preceded this abnormal
task termination. The syserr was caused by
an invalid return code from CZCWX1.
completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined ty: CZCAB
Variable data supplied ty: N/A
Message residence: CZCAB
SYSTEM ERROR.
ROUTINE
INVALID RETURN CODE FROM CALLED
Explanation: system error processor message
050504502 immediately preceded this abnormal
termination of the task.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZADF
Variable data supplied by: N/A
Message residence: CZADF
SYSTEM ERROR, FINDDS. INVALID RETURN FROM LOCATE.
Explanation: System error processor message
050502704 immediately preceded this aLnormal
termination of the task.
Completion Code:
02
Reference Data (Also see Appendix B-03.)
Requirement determined LY: CZAEC
Variable data supplied by: N/A
Message residence: CZAEC
SYSTEM ERROR, INVALID RETURN FROM ADDCAT
Explanation: system error processor message
050503320 immediately preceded this abnormal
termination of the task.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
~quirement determined by:
CZAEI
Variable data supplied by: N/A
Message residence: CZAEI
SYSTEtI ERROR, FINDDS. NO RIGHT PAREN IN DSNAME.
Explanation: System error processor message
050502702 irr~ediately preceded this abnormal
termination of the task. There was no
parentheSis after relative generation
number.
Comple~ion Code:
02
Reference Data (Also see Appendix E-03.)
Requirement determined by: CZAEC
Variable data supplied by:
N/A
Message residence:
CZAEC
SYSTEli ERROR, Ir-.VALID RESULTS FROM INDEX.
System error processor message
050503324 irrmediately freceded this abnormal
termination of the task.
COllpletion Code:
02
Reference Data (Also see Afpendix B-03.)
Requirement determined by: CZAEI
Variable data supplied by: N/A
11essage residence: CZAEI
~lanation:
SYSTEM ERROR. INVALID RETURN CODE.
Explanation: System error processor message
050503102 immediately preceded this abnormal
terrr~nation of the task.
SYSTEM ERROR, INVALID RETURN FROM CHEKDS.
Explanation: system error processor message
050503306 immediately preceded this abnormal
termination of the task.
CcmEletion Code: 02
Reference Data (Also see Appendix E-03.)
Requirement determined by: CZAEI
Variable data supplied by: N/A
Message residence: CZAEI
SYSTEM ERROR, INVALID RETURN FROM CHKNUM.
Explanation: System error processor message
050503308 imrr:eJ.iately preceded this abnormal
termination of the task.
CcmEletion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZAEI
Variable data supplied by: N/A
Message residence: CZAEI
!3YSTEM ERROR, INVALID RETURN FROM DELCAT.
Explanation: System error processor message
050503314 immediately preceded this abnormal
termination of the task.
fart III:
Abnormal Task Termination Messages
111
Completion Code: 02
Reference Data (Also see A~pendix B-03.)
Requirement determined by: CZAEI
Variable data supplied by: N/A
Message residence: CZAEI
SYSTEM ERROR, INVALIC RETURN FROM FINDDS.
Explanation: System error processor message
050503310 immediately preceded this abnormal
termination of the task.
Completion Code: 02
Reference Data (Also see Appendix £-03.)
Requirement determined by: CZAEI
Variable data supplied by: N/A
Message residence: CZAEI
SYSTEM ERROR, INVALID RETURN FROM LOCATE.
Explanation, System error processor message
050503326 immediately preceded this abnormal
termination of the task.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZAEI
Variable data supplied by: N/A
Message residence: CZAEI
SYSTEM ERROR, INVALID RETURN FROM MTREQ
Explanation: System error processor message
050507001 immediately preceded this abnormal
task termination.
completion Code: 02
Reference Data (Also see AFpendix B-03.)
Requirement determined ty: CZAFU
Variable data supplied by: N/A
Message residence: CZAFU
Variable data supplied by:
Message residence: CZAEI
N/A
SYSTEM ERROR, MTREQ
Explanation: System error processor message
080502501 immediately preceded this abnormal
termination of the task.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCAA
Variable data supplied by: N/A
Message residence: CZCAA
SYSTEM ERROR, MTREQ. INVALID RETURN CODE FROM
MSGWR.
Explanation: System error processor message
080502505 or 080502506 immediately preceded
this abnormal termination of the task.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCAA
Variable data supplied by: N/A
Message residence: CZCAA
SYSTEM ERROR, MTREQ. NO MORE ENTRIES IN DEV AVAIL
TAB
Explanation: System error processor message
080502508 immediately preceded this abnormal
termination of the task.
Completion Code:
02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCAA
Variable data supplied by: N/A
Message residence: CZCAA
SYSTEM ERROR. OLTS DE'V. ALLOC. FINDJFCB RETURN
ERROR
SYSTEM ERROR, .INVAL.ID RETURN FROM MSGWR.
Explanation: System eIror processor message
050503302 immediately preceded this abnormal
termination of the task.
Completion Code: 02
Refer'ence Data (Also see Appendix B-03.)
Requirement determined by: CZAEI
Var'iable data sUfplied by:
N/A
Message residence:
CZAEI
SYSTE!>I ERROR, INVALID RETURN FROM NEXTPAR.
Explanation: System error processor message
050503304 immediately preceded this abnorrr.al
termination of the task.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
,
Requirement determined by: CZAEI
Variable data sUFFlied ty:
N/A
Message residence:
CZAEI
SYSTEM ERROR, INVALID RETURN FROM RENAML
Explanation:, System error processor message
050503316 iItmediately preceded this abnormal
termination of the task.
Completion Code:
02
Reference Dat"! (Also see AFpendix £-03.)
Requirement determined by: CZAEI
112
Explanation: System error processor message
080902801 or 080902802 in;mediately preceded
this abnormal termination of the task. The
FINWFCB routine (CZAEB) has returned zeros
as the address of a JFCB.
Since the JFCP.
should exist, it should t.herefore have a
nonzero address.
Completion Code: 02
.!L~ference Dat,a (Also see Appendix B-03.)
Requirement deterrr.ined by: CZATG
Variable data supplied by: N/A
Message residence: CZATG
SYSTEM ERROR TASK TERMINATED
Explanation: System error processor messages
050502500 through 050502516 Day have
preceded this abnormal end of task.
ccmpletion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
Message residence: CZAEA
SYSTEM ERROR •.• TASK TERMINATED ••.
One of system error processor
messages 050503201 through 050503210
~~lanation:
immediately preceded this abnormal
termination of the task.
Completion Code: 01
Reference Data (Also see AFpendix B-03.)
Requirement determined cy: CZAEH
Variable data supplied by: N/A
Message residence: CZAEH
SYSTE~
ERROR TASK TERMINATED
1. Explanation: Minor system error 050505901
through 050505907 immediately preceded this
abnormal termination of the task. If CZAFJ
determines conversational mcde, the system
creates a new task. Otherwise, the task is
abnormally terminated. SYSERRs 050505901
through 050505905 are invalid returns from
system modules. 050505906 indicates invalid
information in a JFCB; while 050505901
indicates no DCB header with an open count
greater than zero in the JFCB.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZAFJ
Variable data supplied by:
N/A
Message residence: CZAFJ
2. Explanation: One of systelr error processor
messages 050506801 through 050506805,
050506807, or 050506808 immediately preceded
this abnormal termination of the task.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZAFS
Variable data supplied by:
N/A
Message residence: CZAFS
SYSTEM ERROR - TASK TERMINATED.
Explanation: One of system error processor
messages 050503401, 050503404 through
050503406, 050503418 through 050503420,
05053423, 050503424, or 050503426 through
050503431 immediately preceded this abnormal
termination of the task. The error could
have been invalid return codes froIT, the
various routines CZAE1 calls, something
wrong with a tblock, synad exit or eodad
exit.
SYSER- SVC- ABEND.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZAEJ
Variable data sUFplied by:
N/A
Message residence: CZAEJ
SYSTE~
termination of the task. The reessage was
caused by an invalid return code or data
returned by a system routine.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requiz-ement determined by: CZAFV
Variable data supplied by: N/A
Message residence: CZAFV
Explanation: system error processor message
050503318 immediately preceded this abnorreal
termination of the task.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZAEI
Variable data supplied by: N/A
Message residence: CZAEI
SYSTEM ERROR.
TROUBLE WITH CHKNUM ROUTINE.
Explanation: System error processor message
050504505 immediately preceded this abnormal
termination of the task.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZADF
Variable data supplied by: N/A
Message residence: CZADF
SYSTEM ERROR.
TROUBLE WITH ESETL ROUTINE.
Explanation: SYNAD exit was taken when ESETL
function was attempted.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZADF
Variable data supplied by: N/A
Message residence: CZADF
SYSTEM ERROR.
TROUBLE WITH MEMBERNAME
Explanation: System error processor message
050504504 immediately preceded this abnormal
termination of the task.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZADF
Variable data supplied by: N/A
Message residence: CZADF
EYSTEM ERROR, UNABLE TO COJo'PLETE COlo!MANr::: OR BACK
CUT.
ERROR. TASK TERMINATED
Explanation: System error processor message
050507002, or diagnostic rr.essages issued by
SECURE, preceded this abnormal end of task.
Completion Code:
02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZAFU
Variable data supplied by:
N/A
Message residence: CZAFU
SYSTEM ERROR, TASK TERMINATED:
SYSTEM ERROR, TOO MANY VOLUMES OR UNABLE TO
GETMAIN.
Explanation: System error processor message
050503322 immediately preceded this abnormal
termination of the task.
Ccmpletion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZAEI
Variable data sUFplied by: N/A
Message residence: CZAEI
DSCOPY INCOMPLETE
SYSTEM ERROR.
Explanation: One of the systen: error processor
messages, 050507101 through 050507103,
irr~ediately preceeded this ahnormal
UNRECOVERABLE ERROR IN SYSSVCT
Explanation: A read or write replace operation
on SYSSVCT resulted in a SYNAD.
Part III:
Abnormal Task Terminaticn Messages
113
Reference Data (Also see A~pendix B-03.)
Requirement determined ty:
CZCFG
Variable data supplied by: N/A
SYSTE~
ERROR.
TEIRe IMPLICIT DYNAMIC LINKAGE REQUEST RECEIVED
AND TWO ALREADY IN PROGRESS
Explanation: system error processor message
081302503 immediately preceded this abnormal
termination of the task. Third implicit
dynamic linkage request received, and two
already in progress.
Completion Code: 02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCJT
Variable data supplied by:
N/A
Message residence: CZCJT
UNRECOVERABLE ERROR IN SYSSVCT
Explanation:
A read o~eration on SYSSVCT was
successful, but a SYNAD occurred when locate
attempted a write-replace operation to
u~date the record.
Reference Data (Also see A~~endix B-03.)
Requirement determined by:
CZCFL
Variable data su~plied by:
N/A
TIME INTERVAL HAS TERMINATED
Explanation: See message text.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZAVB
Variable data supplied by:
N/A
Message residence: CZAVB
TASK ERROR.
CZAEL-PROCESSING COMPLETE, BUT
TRANSIENT.
DEVICE NOT REI,EASED.
DEVICE FRE.ED BY
ABEND.
.Explanation: An error has oc=rred in mounting
successive volumes or in releasing a device.
This error is signified by error return
codes from CZCAB and CZCAD.
Completion Code:. 02
Reference Data (Also see A~pendix B-03.)
Requirement determined by:
CZAEL
Variable data supplied by:
N/A
Message residence:
CZAEL
TIMER INTERRUPT BUT NO REQUEST ENTRY FOUND IN
CHEITB
.Explanation: System error processor message
081302602 immediately preceded this abnormal
termination of the task. Timer interrupt
received, but. no request entry found in
CHBITB.
Completion Code:
02
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCJT
Variable data supplied by:
N/A
Message residence: CZCJT
TCMCOV OR TCMGRD INVLD
;Explanati 011:
The cOllversat. ionalnon conversational flag on the record length
t_ype flag in task common is invalid •
.completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CFADB
Variable data supplied by:
N/A
Message residence:
CFADB
'I.'HE ADDRESS OF PAGE TO BE FREED DOES NOT BEGIN ON
A PAGE BOUNDRY
EXflanation:
See Iressage text.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCGA
Variable data supplied by:
N/A
.Message residence:
CZCGA
THE SIZE OF VIRTUAL MEMORY HAS BEEN EXCEEDED
l'xplana·tion:
See message ·text.
Completion code:_ 01
Reference Data (Also see Appendix B-03.)
Requirement determined by:
CZCGA
Variable data supplied by:
N/A
Message residence:
CZCGA
THE
~ASK
IS ATTEMPTING TO FREE A PROTECTED PAGE
Explanation:
See message text.
Completion Code:
01
Reference Data (Also see Appendix 8-03.)
Requirement detenrined .ty:
CZCGA
Variable data su~r;lied by:
N/A
Message residence:
CZCGA
114
TROUBLE IN WRITE MACRO REPLACING RECORD IN DATA
SE'f
Explanation: System error processor message
050503104 immediately preceded this abnormal
task termination.
completion Code:
01
Reference Data (Also see A~~endix B-03.>
Requirement determ~ned by: CZAEG
Variable data supplied by:
N/A
Message residence:
CZAEG
TROUBLE WITH WRITE MACRO TRYING TO INSERT RECORe
IN lCATA SET
Expla~~!ion:
System error processor rressage
050503105 immediately preceded this abnormal
t.ask termination.
Completion Code:
01
Reference Data (Also see Appendix B-03.)
Requirement determined by:
CZAEG
Variable data supplied by:
N/A
Message residence:
CZAEG
TRYING TO ADD EEYOND END OF DATA SET
bxplanation: An attempt has teen made to add a
key to the directory that is beyond the end
of the data set.
Completion Code:
02
Reference Data (Also see Apf-endix B-03.)
Requirement determined by: CZCPL
Variable data supplied by:
Message residence: CZCPL
N/A
2780 PUNCH NOT SUPPORTED AS AN OUTPUT DEVICE FOR
MSAM.
Explanation: The remote job entry function
does not at present support the 2780 punch,
which was specified by the user as the
device type in the data control block.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCMF
Variable data supplied by: N/A
Message residence: CZCMF
TYPE OF DATA SET IN ncBDSO IS ILLEGAL
Explanation: See message text.
Completion Code: 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCLB
Variable data supplied by:
N/A
Message residence: CZCLB
UNABLE TO OBTAIN DATA SET DSCB
Explanation: System error processor message
080302807 irr~ediately preceded this abnormal
task termination.
COE
VS
FIND SDT EN'rRY
EXJ'lanation: System error processor message
041002501 immediately preceded this abnorrral
termination of the task.
There is no entry
in the I/O stat,istical data table for the
symbolic device address sfecified on the
IORCB.
s:ompleti 2!l_Gode~ 01
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZCRY
Variable data supplied by:
N/A
Jc
Requirement determined by: CEKJC
Variable data supplied by: CEKJH
Message residence: CEKJH
line A **. SUSPECTED
MACHINE/CO~WILER
ERROR
Explanation: When a phase suspects a machine
or compiler error i t returns to this module
to issue the above message and return
control to the Language Processor Controller
(LPC).
line -- seven-digit line number of the last
line entered.
Systerr Default Action: Terminate compilation.
Reference Data (Also see Appendix B-04.)
Requirement determined by:
Any module
Variable data supplied by: N/A
Message residence:
CEKTA
line A .** SYMBOL TABLE OVERFLOW.
CONSTANTS, AND FORMATS.
TOO MANY NAMES,
Explanation: The available space for symbol
table entries has been exceeded.
line ._- seven- digit line nurr.ber of source
statement being processed.
Systen, Default Action:
Terminate compilaticn.
Reference Data (Also see Appendix B-04.)
Requirement determined by:
CEKCI
Variable data supplied by:
N/A
Message residence:
CEKCA
line A .** SYMBOL TABLE OVERFLOW.
AND COMPILE PARTS SEPARATELY.
SPLIT PROGRAM
Explanatlon: A compiler internal table has
overflowed. The precise cause is not easily
identified, but seqmenting the program will
usually remove the difficulty.
line -- seven-digit line nurr·ber of the last
line entered.
System Default Action: Terminate compilaticn.
Reference Data (Also see Appendix B-04.)
Requirement determined by: CEKTF
Variable data supplied by:
N/A
Message residence:
CEKTF
line A **. SYMBOL TABLE OVERFLOW IN PHASE 2.
Explanaticn: The available space for the
symbol table has been exceeded by the
addition of statement number entries.
General Messages
121
line -- seven-digit line number of the END
statement in the source program.
System Default Action:
Terminate compilation.
Reference Data (Also see Appendix B-04.)
Requirement determined by: CEKJC
Variable dat_a supplied by: N/A
Message residence:
CEKJH
line A *** TABLE OVERFLOW.
EQUIVALENCE INFORMATION.
Explanation: The available table space for
internal representation of CO~MON and
EQUIVALENCE information has been exceeded.
line -- seven-digit line number of last
source statement processed.
System Default Action: Terminate compilaticn.
Reference Data (Also see Appendix B-04.)
Requirement determined by:
CEKAD
Variable data supplied by:
N/A
Message residence:
CEKCA
line A *** TABLE OVERFLOW CAUSED BY STATEMENT
FUNCTION REFERENCE
Explanation:
An internal table has overflowed
because of the statement function references
in the source statement.
Nested calls to a
complex statement function definition are a
probable cause for this error.
line A
***
WORKING STORAGE OVERFLOW IN PHASE 3.
Explanation:
line -- seven-digit line nurober of the
source statement.
system Default Action:
Terminate compilation.
Reference Data (Also see Appendix B-04.)
Requirement determined by: CEKBL
Variable data supplied by: N/A
Message residence:
CEKCA
line A
***
TOO MUCH COMMON AND
The source progran-. is too large.
line -- seven-digit line nurrber of the END
statement in the source program.
System Default Action:
Terminate compilation.
Reference Data (Also see Appendix B-04.)
Requirement determined by: CEKRC, CEKKH.
CEKKN, CERKO, CEKKV. or CEKLE
Variable data supplied by:
N/A
Message residence:
CEKKR
TABLE OVERFLOW CAUSED BY SUBSCRIPT
Explanation: The internal space available for
holding expression material or statement
function definition material has overflowed
due to a subscript expression.
11 VOLUME ENTRY HAS OVER 6 CHARS.
Explanation:
Above message will indicate that
a volun-,e ID entered appears to contain more
than 6 chars. The USER should look over and
then re-issue a good field - Volume IDs can
only be 6 characters.
Conversational Action
User:
Check over volume entry list (max.
6
chars.
per); re-enter command.
system: processing continues.
Nonconversational Action
User:
Task deleted.
System:
Processing continues.
Systerr Default Action: Terminate compilation.
Reference Data
Requirement determined by:
CZCFBl
variable data supplied by: N/A
l'lessage residence:
CZCFBP
f-Jessage issued by: GATE (CZAAB)
Destina tion:
Conversational: User's terminal
Nonconversational:
Task SYSOUT
Transmittal technique:
GATWR {by rreans of a
call to the LPC PUTDIAG entry, if in
conversational mode}.
line -- seven-digit line number of source
stat ernent •
Terminate con'f'ilation.
.§.y§item Default Act_ion:
Reference Data (Also see A~pendix B-04.)
Requirement determined by:
CEKAG
Variable data supplied by: N/A
Message residence:
CEKCA
line A *** TABLE OVERFLOW.
TOO
VALUES, NAMELISTS, AND FORMATS
~~NY
CK LIST RE-ISSllE
CMD.
INITIAL
Explanation: The available table space for
storing lni ti al value, narr;elist, dnd
alphameric material has been exceeded.
line-- seven-digit line number of last
source statement processed.
System Default Action:
Terminate cOf[,pilation.
Reference Data (Also see Appendix B-04.)
Requirement determined by:
CEKAD
Variable data supplied by:
N/A
Message residence:
CEKCA
VSEND ~ESSAGE IS TOO LONG OR EXTENDS OVER A PAGE
EOUNLARY
A
line A *** TABLE OVERFLOW.
FUNCTIONS
TOO MANY STATEMENT
Explanation:
The internal space available for
holding statement Function definition
material has been exceeded.
line -- seven-digit line nun-,ber of source
statement. neing processed when the over-flow
occurred.
System Default Action:
Terminate compilation.
Reference Data (Also see Appendix b-04.)
Requirement determined by:
CEKAK or CEKBL
Variable data supplied by: N/A
Message residence:
CEKCA
122
Explanation: The communication being sent to
another task exceeds 239 double words cr
crosses a page boundary.
Ccnversational Action
User: N/A
System:
N/A
Nonconversational Action
U"er: N/l\
System:
N/A
Referenoe Data
Requirement determined by:
CEAQS
N/A
Variatle data supplied by:
Nessage residence: CZAHA
Message issued by: CZAHA
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmi ttal technique: MSGWR
ABEND-userid taskid ATTEMPT TO WRITE TO TERMINAL
FAILED
Explanation: ABEND recursively call.ed during
GATWR
Conversational Action
User:
N/A
System: Processing continues.
Nonconversational Action
User:
N/A
Processing continues.
Reference Data (Also see A"pendix B-06.)
Requirement determined ty: CZACQ
Variable data supplied by:
CZACQ
Message residence: CZACQ
Message issued by: CZACQ
ABEND-userid taskid CLOSE OF DATA SET FAILED
dsname
Explanation: ABEND was recursively called
during close of data set.
dsname-data set name will appear on a
separate line
Conversational Action
User:
N/A
System: Processing continuE,s.
Nonconversational Action
User:
N/A
System: Processing continues.
Reference Data (See Appendix B-06.)
ABEND-userid taskid OPEN OF USER TABLE FAILED
Explanation: ABEND was recursively called
during open of user table.
Conversational Action
User:
N/A
System: Processing continues.
Nonccnversational Action
User:
N/A
System: Processing continues.
Reference Data (See Appendix B-06.)
ABEND-userid taskid READ OF USER TABLE FAILED
Explanation: ABEND recursively called during
read of user table.
Conversational Action
User: N/A
system: Processing continues.
Nonconversational Action
User: N/A
system: Prooessing continues.
Reference Data (See Appendix B-06.)
ABEND-userid taskid RELEASE INTERLOCK ON SHARED
TABLE FAILED
Explanaticn: ABEND was recursively called
during loader logoff.
Ccnversational Action
User: N/A
Systerr:
processing continues.
Ncnconve.rsaticnal Action
User: N/A
System: Processing continues.
Refe:r-ence Data (See Appendix B-06.)
ABENI:-userid taskid RELEASE OF PRIVATE DEVICE
FAILED volid
ABEND-userid taskid CLOSE OF llSE.R TABLE FAILED
Explanation: ABEND was recursively called
during close of user tacle.
Conversational Action
User: N/A
Sys~em:
Processing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data (See Appendix B--06.)
Explanation: ABEND was recursively called
during release of private device.
volid-volume identification will appear on a
separate line.
Conversational Action
User:
N/A
System: Processing continues.
Nonconversational Action
User:
N/A
System: processing continues.
Reference Data (See Appendix B-06.)
ABEND-userid taskid ERASE OF DATASE'I FROM PUBLIC
STORAGE FAILED valid dsname
Explanation: ABEND was recursively called
during erase of data set.
valid-volume identification
dsname-data set naIl'e will appear on a
separate line.
Conversational Action
User: N/A
System:
ProceSSing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data (See Appendix B-06.)
ABEND-userid taskid RELEASE RESTBL INTERLOCK
FAILED dsname
Explanation: ABEND recursively called during
release of RESTBL interlock.
dsnarre-data set name will appear on a
separate line.
Ccnversational Action
User: N/A
System: Processing continues.
Ncnconversational Action
User: N/A
System:
Processing continues.
Ref erence Data (See Appendix B- 06. )
General Messages
123
ABEND-use rid taskid RELEASE VAM INTERLOCKS
(CZCQQ1) FAILED
Explanation: ABEND recursively called during
VAM ABEND interlock release.
Conversational Action
User:
N/A
System: Processing continues.
Nonconversational Action
User:
N/A
System: processing continues.
Reference Data (See Appendix B-06.)
ABEND-use rid taskid SET RESTBL INTERLOCK FAILED.
dsname
ABEND recursively called during
set RESTBL interlock.
~lanation:
dsname-data set name will appear on a
separate line.
Conversational Action
User:
N/A
System: Processing continues.
Nonconversational Action
User:
N/A
System: Processing continues.
Reference Data (See Appendix B-06.)
ABEND-useridtaskid UPDATE OF ACCT TABLE FAILED
Explanation: ABEND recursively called during
accounting routine.
Conversational Action
User:
N/A
System: Processing continues.
Nonconversational Action
User:
N/A
System: Processing continues.
Reference Data (See Appendix B-06.)
ABEND-userid taskid WRITE OF USER TABLE FAILED.
Explanation: ABEND recursively called during
write of user table.
Conversational Act"ion
User: N/A
System:
Processing continues.
Nonconversational Action
User: N/A
System:
Processing continues.
Reference Di!ta (See Appendix B-06.)
data set resides.
Filter Code: WSA
Conversational Action
User: Specified in text of message.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-05.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
AB08 ENTER DCB SUBPARAM LIST WITHIN PARENTHESES.
Explanation: User prompted for data control
block subparameter list.
Filter Code: WSA
Conversational Action
User: Specified in text of message.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversaticnal Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-05.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
ACTIVATE PREFIX FOR RE-IPL
Explanation: This message is produced if the
prefix switch on the configuration console
for the IPL'd CPU is in the INACTIVE or OFF
position. The prefix should be active.
Ccnversational Action
User: N/A
System: N/A
Nonconversational Action
User: Activate the prefix switch for the
IPL'd CPU (on the configuration console)
and reinitiate STARTUP by IPL.
System: System waits for reinitiation.
Reference Data
Requirement determined by: CEIAP
Variable data supplied by: N/A
Message residence: CEIAP
Message issued by: CEIAP
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: Own I/O routine
A~DRESS
ABE~D-userid
Exr:;lanation: ABEND was recursively called
during GATWR.
.collversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User:
N/A
System: Processing continues.
Reference Data ' data set organization is required.
Filter Code: WSA
Conversational Action
User:
Enters I or defaults.
System: Awaits response.
Nonconversational Action
User: N/A
SysteIf: Continues processing.
Reference Data (Also see Appendix B-05.)
Requirement determined by: CZADF
Variable data supplied by:
N/1\
A016 GIVE START LINE NO.
DEFAUL']':
100
Explanaticn:
Give the starting line number of
the line data set being created.
100 will
othe1~ise be used as the case number.
Filter Code: I'lSA
ConverSational Action
User:
Enters line number or defaults.
System:
Awaits response.
Ncnconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-05.)
Requirement determined by: CZADF
variable data supplied by:
N/A
General Messages
127
A011 ENTER DDNAME.
Explanation: The user is prompted _for the name
of the data definition that is to be deleted
or that identifies concatenation from which
one or all data sets are to be
deconcatenated by the RELEASE command, or
for one or more names of DDEF commands as an
operand of the eDD command.
Filter Code: WSA
Conversational Action
User: Specified in text. For the CDD
command t_he operand can be defaulted to
execut.e all DDEFs in a prestored data
set.
System:
Waits for user's response; then
continues processing.
Nonconversational Action
User: N/A
System: Task abnormally terminated for CDD
command. Not applicable for RELEASE
command.
R€o'ference Data (Also see Appendix B-05.)
-_. Requirement det.ermined ty: CZAFJ or CZAFS
Variable data supplied by: N/A
User: N/A
System:
Task abnormally terminated.
Reference Data (Also see Appendix B-05.)
Reguirement determined by: CZAFJ
Variable data supplied by: N/A
A038 ENTER YOUR DSNAME
Explanation: Enter the data set name for the
data set being shared.
Filter Code: XSA
Conversational Action
User: Enters data set nan'e.
System: Awaits response.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-05.)
Requirement determined by: CZAFI
Variable data supplied by: N/A
A039 ENTER THE OWNER'S USERID
A029 ENTER TAPE TYPE:
SYSGEN VALUE.
7, 7DC, OR 9.
DEl"AULT:
Explanat.ioI}: The operator- must enter the tape
type paramet.er of the READ TAPE cOllnr,and.
7
= seven-channel tape; 70e = seven-channel
tape with data conversion; 9 '" nine-channel
tape. The default is the tape type that has
been estatlished by the installation (SYSGEN
value),
Conversa,tcional_.J':I.ction
User:
Enters tape type option.
System: Awaits response.
}-lonconversational Action
User:
N/A
System: Cancels corr.mand.
Reference Data (Also see Appendix B-05.)
Requirement determined by: CZABD
Variable data supplied by: N/A
A035 EN'IER SHARING USERS ID LIST.
DEFAULT:
ALL
The list of us ers to be penni t-ted
has not been given in the parameter list.
Filter Code: WSA
Conversa t.ional Action
·--User:- Enters list or defaults.
SysteD:
Awaits response.
~smconversational Act.ion
User: N/A
S jstem, Termina-tes command processing.
geference Data (Also see AFpendix B-05.)
Requirement determined ty: CZAFH
Variabl e data supplied by: N/l,
~~lanati~?!l:
A03? ENTER RET TO RETAIN ,TOBLIB.
RETAINED.
DEFAULT:
NOT
.!'xplanation: Operand omitted in R.ELEASE
command.
Fili_er cod§: ,i/SA
Conversational Action
User: Specified In text of message.
System: Waits for user's response and,
aft.er receiving it, continues proce:3sing.
NOI"lsonve:r,-sa!;ional..l:!ct:ion
128
Explanation: Enter the userid of the owner of
the data set being shared.
Filter Code: XSA
Ccnversational Action
User:
Enters userid.
System: A1Naits response.
Ncnconversational Action
User: N/ A
System: Continues processing.
Reference Data (Also see Appendix B-05.)
Requirement determined by: CZAFI
Variable data supplied by: N/A
11040 ENTER OWNER'S DATA SET NAME (OR INDEX) OR
ENTER *A~L
Explanation: Enter the data set name of the
owner's data set, or. if the entire catalog
is being shared, enter *ALL.
Filter Code: XSA
conyersatIOnal Action
User: Enters data set naffie or *ALL.
System: Awaits resr;onse.
Ncnconversational Action
User: N/A
Systerr,: continues processing.
Reference Data (Also see Ap~endix B-05.)
Re~lirement determined by:
CZAFI
Variable data supplied by: N/A
1I06A ENTER END BYTE.
DEFAULT:
132.
Explanation: The user is being asked to
indicate the byte number at which printing
is to stop for the PRINT or WRITE TAPE
command.
Conversational Action
-- User: Enter·s end position or defaults •
System: Awaits response.
Nonconversational Action
USEr:
N/l,
System: cancels comrr,and.
Reference Data (Also see Appendix B-05.)
Requirement determined by: CZABD
Variable data supplied by: N/A
A060 ENTER SYSIN DSNAME.
Explanation: The user is rron,pted to enter a
missing data set name as operand for the
BACK or EXECUTE command.
Filter Code: WSA
Conversational Action
User:
Specified in text of message.
System: Waits for user' s rE,sponse and,
after receiving it, continues processing.
Nonconversational Action
User:
N/A
Systerr.:
N/A
Reference Data (Also see Appencix B-OS.)
Requirement determined by: CZAEB or CZABC
Variable data supplied by:
N/A
A061 ENTER START BYTE.
DEFAULT:
1.
Explanation: The user is being asked to
specify a starting byte position other than
1 if the first part of each record is not to
be read or written.
Conversational Action
User: Enters start position or defaults.
System: Awaits response.
Nonconversational Action
User:
N/A
System:
Cancels command.
Reference Data (Also see Appendix B-05.)
Requirement deterrrined by:
CZABD
Variable data supplied l:;y:
N/A
A062 ENTER SPACING OPTION:
1, 2, 3, OR EDIT.
Explanation:
The user is being asked to
specify missing spacing ortioD for the PRINT
or WRITE TAPE commands.
Conversational Action
User:
Enters spacing option or defaUlts.
System: Awaits response.
Nonconversational Action
User:
N/A
System: cancels command.
Reference Data (Also see Appendix B-05.)
Requirement determined l:y:
CZAED
Variable data sur::rlied Cy: N/A
A063 ENTER H FOR HEADER.
DEFAULT:
NO HEADER.
Explanatlon: The user is being asked to
specify the header option for the PRINT or
WRITE TAPE commands (to indicate if the
heading is to be printed on eacb page).
Conversational Action
User:
Enters rl or defaults.
System: Awaits resronse.
Nonconversational Action
User:
N/A
Systerr: Cancels command.
Reference Data (Also see Appendix B-05.)
Requirement determined by: CZABD
Variable data supplied by:
N/A
A064 ENTER LINES PER PAGE.
DEFAULT,
54.
Explanatlon: The user is being asked to
specify the number of lines teo l:e printed on
each page for the PRINT cr WHITE TAPE
commands.
Filter Code: WSA
Conversational Action
User:
Enters lines/page or defaults.
System: Awaits response.
Nonconversational Action
User: N/A
System:
Terminates processing command.
Reference Data (Also see Appendix B-05.)
Requirement determined by: CZABD
Variable data supplied by: N/A
A065 ENTER P FOR PAGE NOS.
DEFAULT:
NO NOS.
Explanation: The user is being asked to decide
if page numbers are to be generated and
rrinted on printed pages (for WRITE TAPE or
PRINT commands).
Filter Code: WSA
Conversational Acticn
User: Enters P or defaults.
System: Awaits response.
Nonconversational Action
User: N/A
System:
Terminates processing command.
Reference Data (Also see Appendix B-05.)
Requirement determined by: CZABD
Variable data supplied by: N/A
A066 ENTER ERASE.
DEFAULT:
NO ERASURE.
The user is being asked to
indicate whether input data set is to be
erased after output is issued for the PRINT,
PUNCH, or WRITE TAPE commands.
Filter Code: WSA
Conversational Action
User:
Enters erase option or defaults.
:.oysterr,: Awaits response.
Nonconver'sational Action
Us tT:
N/A
;"~ystem:
Terminates processing command.
Heference Data (Also see Arrendix B-05.)
Kequirerrent determined by:
CZABD
Variable data supplied by:
N/A
Fxplan~tjon:
A067 ENTER ERROR OPTION:
ACCEPT, SKIP, CR
~r;D.
Explanation: The user is being asked to
specify the action to be taken l:y the system
when it encounters an Uncorrectable read
error during processing or a PRINT or READ
TAPE corr,ma nd .
Conversational Action
User:
Enters error option or defaults.
System: Awaits response.
Nonconversational Action
User:
N/A
System: Cancels command.
Reference Data (Also see Aprendix £-05.)
Requirement determined by:
CZAEL
Variable data supplied by: N/A
A068 ENTER FORM NO.
DEFAULT:
STANDARD FORM.
Explanation: The user is being asked to
srecify the form number of printer form or
card stock to be used for the PRINT or PUNCH
corrmand.
Conversational Action
User:
Enters form nurr,ber or defaults.
System: Awaits response.
Nonconversational Action
General Messages
129
User:
N/A
cancels command.
Reference Data (Also see Appendix B-05.)
Requi rement· determined by: CZABD
Variable da·ta supplied by: N/A
Syste~:
A069 ENTER END BY'I'E.
DEFAULT:
80 (EBCDIC).
The user is l:;eing asked to
specify the last column to be punched for
the PUNCH command.
Filter Code: WSA
COnv.2r~onal Action
User:
Enters end column position.
System: Awaits response.
Action
-Nonconversational
User:
N/A
System:
Terminates processing command.
Reference Data (Also see A~pendix B-05.)
._- Requirement det:ermined by: CZABD
Variable data supplied ty:
N/.A
j::~lanat:j,on:
A070 EN'IER STACKER SELECT:
1,~,
3, OR EDIT
ExplanatioI}' The user is teing asked to
specify the stacker select option for the
PUNCH command.
Filter Code: WSA
conversatiOnal Action
User: Enters stacker select option.
System: Awaits response.
~onconversational Action
User:
N/A
System: Terminates processing command.
Reference D§lta (Also see A"fpendix B-05.)
Requi rement. determined by: CZABD
Variable data supplied by: N/A
A072 ENTEr< VOLUME NO. OR CTLG
,~XFla.natio~:
The user is teing asked to
indicat:e if the input data set is cataloged
(CTLG) or, if not, to give the volume
identification of the user's tape. This
applies to the READ TAPE corr~and.
Conversational Action
User:
Enters requested inforn.ation.
System:
Awaits response.
Nonconversational Action
User·:
N/J\
System:
cancels cOlT-maw'!.
Reference Data (Also see Appendix B-05.)
Requirement determined by: CZABD
VariaJ:::le data supplied .ty: N/A
A077 ENTER FIRST DSNAIVE.
.!'xplanation: The user is asked to specify the
name of an input data set (for RT command)
ort.he name of a data set to be wri tt.en on
tape (f or W'I' command).
Filter Code: WSA
ConversatiOnal Action
User:
Specified in text of message.
System: Waits for user's response and,
aft.er receiving ito, continues processing.
Nonconversational Action
User:
N/A
Syst.em:
Task abnorlJlally terminated.
Reference Dat",: (Also see Afpendix B-05.)
130
Requirement determined by:
Variable data supplied by:
A078 ENTER TAPE VOLUME ID.
CZABD
N/A
DEFAULT:
SCRATCH.
Explanation: The user is being asked to
specify the volume identification of the
output tape (for WRITE TAPE command).
Conversational Action
User: Enters volume ID or defaults.
System: Awaits response.
Nonconversational Action
User: N/A
System:
Cancels command
Reference Data (Also see Appendix B-05.)
Requirement determined by:
CZABD
Variable data supplied by: N/A
A079 ENTER BLOCKING FACTOR.
VALUE.
DEFAULT:
SYSTEM
Explanation: The user is being asked to
specify the J:::locking factor to be used for
the output generated by the WRITE TAPE
command.
Conversational Action
User: Enters blocking factor or defaults.
System: Awaits response.
Ncnconversational Action
User: N/A
System: cancels command.
Reference Data (Also see Appendix B-05.)
Requirement determined by:
CZABD
Variable data supplied by:
N/A
A080 ENTER BSN.
Explanation: Prompting for a batch sequence
rlul[,ber.
Filter code: WSA
Conversational Action
User:
Specified in text of rressage.
System: Waits for user's respcnse and,
after receiving it, continues processing.
~onconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-05.)
Requirement determined by: CZABJ
Variable data supplied by:
N/A
A082 ENTER MSG TEXT.
Explanation: A prompt for message text.
Filter Code: WSA
Conversational Action
User:
Specified in text of message.
System: Waits for user's response and,
after receiving it, continues processing •
Ncnconversational Action
User:
N/A
system: N/A
Reference Data (Also see Appendix B-05.)
Requirement determined by: CZACD
Variable data supplied by: N/A
A084 DCB
INFOR~ATION
REQUIRED.
ENTER KEYLEN.
Explanation: A change in data set organization
is indicated, but the user has not indicated
the required DCB information in the DDEF for
the CDS cowmand.
Here, he is prompted for
the key length to make a change to the VISAM
organization.
Filter Code: WSA
Conversational Action
User: Specified in text of message.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-OS.)
Requirement determined by: CZAFV
Variable data supplied by:
N/A
A08S DCB INFORMATION REQUIRED.
E~~ER
PAD.
Explanation: A change in the data set
organization is indicated, but the user has
not given the needed LCE information in a
DDEF for the CDS command. Here, he is
prompted for the padding value to change to
VISAM organization.
Filter Code: WSA
Conversational Action
User: Specified in text of message.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-05.)
Requirement determined by: CZAFV
Variable data supplied by: N/A
A090 ENTER
~SG
DEFAULT:
MEMBER
Explanation: A member of a partitioned data
set is being copied, but the user did not
specify the member's organization in a DDEF
for the CDS command.
Filter Code: WSA
Conversational Action
User: Specified in text of rr,essage.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-OS.)
Requirement determined by: CZAFV
Variable data supplied by: N/A
ENTER RKP.
Explanation: A change in the data set
organization is indicated, but the user did
not give the needed DCB information in the
DDEF for the CDS command. Here, he is
prompted for a record key displacement value
to change to VISAlJ! organization.
Filter Code: WSA
Conversational Action
User:
Specified in text of message.
System: waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-OS.)
Requirement determined by: CZAFV
Variable data supplied by:
N/A
A086 DCB INFORMATION REQUIRED.
A091 ENTER DSORG VIP OR VSP.
GIVEN OLD DSORG.
A098 ENTER VOLUME ID.
Explanation: The user is asked to specify the
identification of the volume whose table of
contents is to be examined (VTOC? command)
or the private disk volume on which a copy
of a quit user's data set is to be stored
(QUIT conmand).
Filter Code: WSA
Conversational Action
User: Specified in text of rressage.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: Task abnormally terminated for
VTOC? command.
(Not applicable for QUIT
command. )
Reference Data (Also see Appendix B-OS.)
Requirement determined by: CZAEN, CZAFL
Variable data supplied by:
N/A
AI00 ENTER E TO ERASE OLD DS.
DEFAULT:
NO ERASE .•
Explanation: The user is asked for the
disposition of a data set that will be
copied. The option takes effect later.
Filter Code: WSA
Ccnversational Action
User:
Specified in text of message.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-OS.)
Reguirewent determined by:
CZAFV
Variable data supplied by: N/A
NUMBER.
1\104 REENTER LINE NUMBER OR RANGE OF LINE NUMBERS
Explanation: A prompt to enter a message
number.
Filter Code: WSA
Conversational Action
User: Specified in text cf message.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User:
N/A
system: N/A
Reference Data (Also see Appendix B-05.)
Requirement determined by: CZACD
Variable data supplied by:
N/A
Explanation: The line number l[USt consist of
1-7 digits (decimal). If a range is to be
indicated, separate the two numbers with a
corr~a, and enclose the pair within
parentheses.
Filter Code: XSA
Conversational Action
User: Enters new line nurr,ber (s) .
System: Awaits response.
Nonconversational Action
User: N/A
System: Continues processing.
General Messages
131
Data (Also see A~pendix £-05.)
Requi rement determined by: CZAEM
Variable data supplied by: N/A
g~ference
1'1105 ENTER I,INE NOS.
DEFAULT:
system: Task abnormally terminated.
Reference Data (Also see Appendix B-05.)
Requirement determined by: CZABD
Variable dat.a supplied by: N/ A
ENTIRE MEMBER OR
DS PRESENTED.
Al16 ENTER SPACING OPI'ION:
Explanation:
If a line number or range of line
nUlDbers is ent_ered, that line or range will
be displayed. otherwise, t~he entire
contents of the member or data set will be
displayed.
Filter Code: WSA
Conversational Action
- - TJser:~ters
numbers or defaults.
System: Awaits response.
Nonconversational ~ction
User:
N/A
.sys·tt-~ru:
Cont:.inues process ing"
Reference Data (Also see AFpendix B-05.)
Requirement determined by:
CZAEM
Variable dat.a supplied by: N/A
iine
.Al13 ENTER DISPOSITION OF USER'S DATA SETS
Expl.anatioX"2: E will cause all data sets to be
erased .- default lists each data set for
individual choice.
Filter Code: XSA
Conversational Action
User:
specified-in text of message.
system: Waits for user's response and,
after receiving it, continues processing.
.l'IonconversationJ:lJ,~!.Lqn
User:
N/A
System! N/A
Reference Data (Also see Appendix B-O::'.)
Requirement determined by: CZAFL
Variable data ~iupplied by'
N/A
1, 2, OR 3
Explanation: The user is being asked to
specify the number of lines to be skipped
after each line is printed. This message is
issued when the operator enters PRINT
command for a SYSLOG.
Default: double
spacing.
Conversational Action
User: Enters spacing option or defaults.
System: Awaits response.
Nonconversational Action
User: N/A
System: Cancels command.
Reference Data (Also see Appendix B-05.)
Requirement determined by: CZABD
Var·iable data supplied by: N/A
Al17 ENTER DATE IN MM/DD/YY
~xplanation:
The date has not yet been entered
in the correct format.
Filter Code: WSA
Conversational Action
User: SF€cified in text of message.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System:
N/A
Reference Dat2 (Also see Appendix B-05.)
Requirement determined by' CZACB
Variable data sUFplied by:
N/A
Al18 ENTER TIME IN HH.MN.SS
Al14 BNTER:
E TO ERl,SE,D TO STORE
RECl;'l'ALOG TO ANOTHEH USERID
O~
DISK,C TO
E erases the da ta set. D stores
on a disk via U,e \lV processor. C recatalogs
to another user ID.
Filt_er Code: XSA
COIlversational Action
... \Jser:--Specifiec,er:
N/A-------Systerr.: 'rask abnormally terminated.
Reference Data (Also see Appendix B-05.)
._--Requirement determined by:
CZAEN
Variable data supplied by: N/A
!L~lanaticn~
!~l:':'r,-a.!c.ion:_
The \lfier 1S proTI'Pted for the name
under wbich t:he data set is to be cataloged
(for HT or "T command).
.!ti!.!:5E::_ cod.~ ~
WSA
Conversat_ional Action
---user:--Spec:r:rled--In
text of message.
for user's resr,onse and,
after receiving it, continues processinq.
~3ystelr:
~ait_s
N0Ilconyer!:,~:UQr.Lal
User
.132
~
N/A
l'c!ci_QI,
*****BAD SVC CALL*****
Explanation:
Task issued on undefined SVC.
This message results from a call to the
System Error Processor.
Conversational Action
User:
N/A
System: SVC ignored.
Nonconversational Action
User: N/A
System: svc ignored.
Reference Data
Requirement determined by: CEAHQ
Variable data supplied by: N/A
Message residence: CEAHQ
Message issued by: CEAIS
Destination
Conversational: operator's Terminal
Nonconversational: Operator's Terminal
Transmittal technique: ERROR Macro
BF02 dsname ... COPIED AS dsname2 FROM TAPE. FSQ fsq.
VSN vsn.
Explanation: The data set has been restored
from tape successfully.
fsq = File sequence Number
vsn = Volume Serial Number
Fil ter Code: WSA
Conversational Action
User:
N/A
System: Processing continues with next
command.
Nonconversational Action
User:
N/A
System: processing continues with next
command.
Reference Data (Also see Appendix B-05.)
Requirement determined by: CZAET
Variable data supplied by: CZAET
BF03 dsname ... COPIED AS dsnamea'
BECAUSE RELOCATION ENTRIES WERE ADDED TO THE PAGE
ALLOCATION TABLE IT HAD TO BE RE-WRITTEN. PGOUT
REQ. FAILED.
Explanation: During run of task it is possible
that some DSCBs may have to be relocated
because of an error on a DSCB PAGE OUT.
If
this happens. the new area will be noted in
PAT and relocation entries added.
This
error may occur when the PAT TABLE is being
re-written.
Conversational Action
User: Should be aware that PAT may be in
ERROR and that some DSCBs are.
System: Processing continues.
Nonconversational Action
User: Task deleted.
Processing continues.
System Default Action: Terminate compilation.
Reference Data
Requirement determined by: CZCFB1
Variable data supplied by: N/A
Message residence: CZCFBP
Message issued by: GATE (CZAAB)
Destination
Conversational:
User's terminal
Nonconversational:
Task SYSOUT
Transmittal technique: GATWR (by means of a
call to the LPC PUTDIAG entry. if in
conversational mode).
BF01 dsname ... COPIED AS dsname2 ON 'rAPE, FSQ fsq,
VSN vsn.
Explanation: The data set has been copied to
tape successfully.
fsq = File Sequence Number
vsn = Volume Serial Number
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues with next
command.
Nonconversational Action
User: N/A
system: Processing continues with next
command.
Reference Data (Also see Appendix B-OS.)
Requirement determined by: CZAET
Variable data supplied by: CZAET
Explanation: The data set has been copied
successfully.
Filter Code: WSA
Conversational Action
User: N/A
system: Processing continues with next
command.
Nonconversational Action
User:
N/A
System: Processing continues with next
command.
Reference Data (Also see Appendix B-OS.)
Requirement determined by: CZAET
Variable data supplied by: CZAET
BF10 PROCESSING COMPLETE
Explanation: RPS or CVV has finished
successfully.
Filter Code: WSA
Conversational Action
User:
N/A
system: Ready for next command.
Nonconversational Action
User:
N/A
System: Ready for next command.
Reference Data
Requirement determined by: CZAXX
Variable data supplied by:
N/A
Message residence: SYSMLF
Message issued by: CZATJ
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: MSGWR
BREAK ORDER TO 2741 FAILED.
2702.
POSSIBLY TROUBLE IN
Explanation: TM
CEAAV 191 PAGING ERROR ALONG nnnn EQUIPMENT CHECK
Explanation: Hardware I/O error detected.
nnnn-actual device address (in hexadecimal).
Conversational Action
User: !VA
System: Processing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data (See Appendix B-07.)
CEAAV 201 PAGING ERROR ALONG nnnn INTERVENTION
REQUIRED
Explanation: Hardware I/O error detected.
nunn-actual device address (in hexadecimal).
Conversational Action
User: !VA
System: Processing continues.
Nonconversational Action
User: N/A
System:
Processing continues.
Reference Data (See Appendix B-07.)
CEAAV 211 PAGING ERROR ALONG nnnn BUS OUT CHECK
Explanation: Hardware I/O errOr detected.
nnnn-actual device address (in hexadecimal).
Conversational Action
User: !VA
System: Processing continues.
Nonconversational Action
User: N/A
system:
Processing continues.
Reference Data (See Appendix B-07.)
CEAAV 221 PAGING ERROR ALONG nnnn DATA CHECK
Explanation: Hardware I/O error detected.
nnnn-actual device address (in hexadecimal).
Conversational Action
User: N/A
System:
Processing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data (See Appendix B-07.)
CEAAV 231 PAGING ERROR ALONG nnnn CHANNEL DATA
CHECK
Explanation: Hardware I/O error detected.
nnnn-actual device address (in hexadecimal).
Conversational Action
User:
WA
System: Processing continues.
Nonconversational Action
User: WI'..
System: ProceSSing continues.
Reference Data (See Appendix B-07.)
1114
CEAAV 2111 PAGING ERRCR ALONG nnnn NO RECORD FOUND
- CCRRECT TRACK
Explanation:
Hardware I/O error detected.
nnnn-actual device address (in hexadecimal).
Conversational Action
User: N/A
System:
processing continues.
Nonconversational Action
User: N/A
System:
Processing continues.
Reference Data (See Appendix B-07.>
251 PAGING ERROR ALONG nnnn SEEK CHECK
(COMMAND REJECT)
CEA~V
Explanation:
Hardware I/O error detected.
nnnn-actual device address (in hexadecimal)~
Conversational Action
Us~r:
N/A
System:
processing continues.
Nonconversational Action
User: N/A
System:
Processing continues.
Reference Data (see Appendix B-07.)
CEAAV 261 PAGING ERROR ALONG nnnn MISSING ADDRESS
MARKER. HA = xxxxxxx
Explanation:
Hardware I/O error detected.
nnnn-actual device address (in hexadecimal).
Conversational Action
User: N/A
System:
Processing ccntinues.
Nonconversational Action
User: N/A
System:
Processing continues.
Reference Data (See Appendix B-07.)
CEAAV 281 PAGING ERROR ALONG nnnn ATTENTION
Explanation:
Hardware I/O error detected.
nnnn-actual device address (in hexadecirral).
Conversational Action
User: N/A
System:
Processing continues.
Nonconversational Action
User: N/A
System:
Processing continues.
Reference Data (See Appendix B-07.)
CEAAV 291 PAGING ERROR ALONG nnnn DATA CHECK.
xxxxxxx
HA
Explanation:
Hard~are I/O error detected.
nnnn-actual device address (in hexadecimal).,
Conversational Action
User:
N/A
system: Processing continues.
Nonconversational Action
User: N/A
system:
Processing continues.
Reference Data (See Appendix B-07.)
CEAAV301 PAGING ERROR ON nnnn CHANNEL/INTERFACE
CONTROL CHECK.
Explanation:
Hardware I/O error detected.
nnnn-actual device address (in hexadecimal).
Action
page of GC28-2037-7. Issued SeFt. 30, 1972 by TNL GN28-3220
User:
tVA
System:
Processing continues.
Reference Data (See Appendix B-01.)
CEAAV311 PAGING ERROR ON xxxx ACTION REQUIRED:
MOVE DISK PACK xxxx TO NEW DRIVE PLUGGED yyyy OR
NOT READY/READY SAME DRIVE.
Explanation: Hardware I/O error detected.
xxxx-actual device address (in hexadecimal).
Operator Action: As indicated above.
Reference Data (See Appendix B-07.)
CEAISOOl RECURSIVE SYSER CALL -
RE-IPL
Explanation: This message will appear if SYSER
is called before it has completed processing
the original SYSER call.
Conversational Action
User:
N/A
System:
Re-.IPL - system unable to continue
processing.
Nonconversational Action
User:
N/A
System:
Re-IPL - system unable to continue
processing.
Reference Data
Requirement determined by: CEAIS
Variable data supplied by:
N/A
Message residence:
CEAIS
Message issued by:
CEAIS
Destination: Operator's Terminal
Transmittal technique:
ERROR Macro
CEAIS002 REAL CORE MAJOR SOFTWARE ERROR-RESTART
CANNOT BE ACCOMPLISHED, RE-IPL
Explanation: This message will appear if a
major real core software error occurs.
Conversational Action
User:
N/A
System: Re- IPL -- system unable to continue
processing.
Nonconversational Action
User:
N/A
System:
Re-IPL -- system unable to continue
processing.
Reference Data
ReqUirement determined by: CEAIS
Variable data supplied by:
N/A
Message residence:
CEAIS
Message issued by:
CEAIS
Destination: Operator's Terminal
Transmittal techniques:
ERROR Macro
CEAIS003 TASKS 1SA PAGE NOT IN CORE - TASK WILL BE
PROGRAM CHECKED.
Explanation:
This message will appear if the
LRA instruction with an address of zero's
results in a condition code other than zero.
A condition code other than zero indicates
that the tasks ISA page is not presently in
core.
COIlversational Action
User:
N/A
System: Task will be program checked
system will continue processing.
Nonconversational Action
User:
N/A
system:
Task will be program checked -
system will continue processing.
Reference Data
Requirement determined by: CEAIS
Variable data sUF~lied by: N/A
Message residence: CEAIS
Message issued by: CEAIS
Destination: Operator's Terminal
Transmittal technique:
ERROR Macro
CEAIS004 LRAFAILEO - SYSER PARAMETER LIST CANNOT
BE FOUND .. TASK WILL BE PROGRAM CHECKED
Explanation:
This message will aFpear only if
the SYSER parameter list is not in core at
the time SYSER takes control.
This only
applies to virtual storage SYSERs.
~onversational Action
User:
N/A
Syst:em:
Task .. ill be program checked system will continue processing.
Nonconversational Action
User:
N/A
System: Task will be program checked system .. ill ccntinue processing.
Reference Data
Requirement determined by: CEAIS
Variable data sUFplied by:
N/A
Message residence:
CEAIS
Message issued by: CEAIS
Dest.ination: Operat.or· s Terminal
'rransmittal teChnique:
ERROR Macro
CEATS005 TASK 10 J(xxx HAS EXCEEDED TWO SYSERRS
WITHIN 2 MINUTES.
l~lanation:
The specified task is probably in
SYSERR loop.
Action
-user: N/A
Systcern:
A re-IFL is p:cbably required.
Reference Data
----Requirement determined by: CEAIS
Variable data sUFplied by: CEAIS
~'i
CEB101A INVALID CARD CGDE.
DEPRESS INTERRUPT KEY.
CCRRECT ERROR.
Exp1anation:
Any combination of punches in a
single card coluITn cther than a legal EBCDIC
code will generate this message.
Conversational Action
User:
N/A
System:
N/l\
Nonconversational Action
User:
Corrects card. then depresses
interrupt key.
system: Waits for interrupt. then resumes
processing.
Reference Data (Also see AFpendix B-08.)
Requirement determined by: CEBVP
Variable data supplied by:
N/A
Message residence:
CEBVP
Message issued ty: CEBVP
CEB101W INVALID CARD CCDE.
JCB TERMINATED.
!!E.lanation: Any combination of punches in a
single card coluITn other than a legal EBCDIC
code will generate this rressage.
Conversational Action
User:
N/A
General Messages
145
Page of GC28-20]7-1. Issued Sept. 30, 1972 by TNL GN28-3220
System:
N/JI.
~onconversational
Action
User:
N/A
System:
N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by:
CEBOI, CEBOP, or
CEBDR
Variable data supplied by:
N/A
Message residence:
CEBOI, CEBOP, and CEBDR
Message issued by: CEBOI, CEBOP. or CEEDR
CEB102A CONTROL STATEMENT ERROR.
JOE TERMINATED.
Explanation:
A utility statement contains an
incorrect keyword, parameter, or name field.
Conversational Action
User:
N/A
System:
N/A
Nonconversational Action
User:
N/A
System:
N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by:
CEEOI, CEBDP, or
CEBDR
Variable data supplied by:
N/A
Message residence:
CEEDI, CERDP, and CEBDR
Message issued by:
CEBDI, CERDP. or CEBDR
CEB103A STATEMENT SEQUENCE ERROR.
JOB TERMINATED.
Explanation:
The utility statements are not in
the proper sequence, or unnecessary ut.ility
statements are present.
Conversational Action
User:
N/A
System:
N/A
~onconversational Action
User:
N/A
System:
N/A
Reference Data
Requirement det.ermined by: CEBD I. CEBDP. or
CEBOR
Variable data supplied by:
N/A
Message residence:
CEBOI, CEBDP, and CEBDR
Message issued by:
CEBDI, CEBDP, or CEBDR
CEB104W SVC INTERRUPT.
Explanation:
This message is produced if,
after IPL of the program, the system has
entered the WAIT state with FFFF displayed
in the instruction counter portion of the
console, and the request key has been
depressed.
n indicates the version number
of the program being used.
Conversational Action
User:
N/A
System:
N/A
Nonconversational Action
User:
INPUT - xxxx cuu EOB where xxxx is
device type (1052, 2400. or 2540); c is
channel; uu is unit number of specified
device.
system:
Continues processing and control
statements are read from specified
device.
Message CEB102A is issued if
error is detected.
Reference Data (Also see Appendix R-08.)
Requirement determined by:
CEEDI, CEBDP, or
CEEDR
Variable data supplied by: CEBDI, CEBDP, or
CEBDR
Message residence: CEBDI, CEBDP, and CEBDR
Message issued by: CEEDI, CEBDP, or CEBDR
CEB106A CONTROL STATEMENT VOLID MISSING OR DOES
NOT AGREE WITH 10 IN VCL LAEEL WHICH FOLLOWS.
VOLID = xxxxxx.
Explanation:
The VCLID parameter in the
utility control staterrent did not match the
volume serial number or ID found on the
receiving volurre (xxxxxx).
The job is
terminated.
Conversational Action
User:
N/A
Systerr,:
N/A
Nonconversational Action
User:
N/A
system:
N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CERDI or CEBDR
variable data su~~lied by: CEROI or CERDR
Message residence:
CEBDI and CEBDR
Message issued by: CEEDI or CEBDR
JOB TERMINATED.
CEB101W TRACK ZERO EAD.
Explanation:
An SVC was issued without a
response having been defined. This is a
system error ..
Conversational Action
User:
N/A
system:
1'1/1'.
Nonconversational Action
User:
N/A
System:
N/A
Reference Data (Also see Appendix B-OB.>
Requirement determined by:
CEEDI, CEBDP.
CEROR, or CEBVP
Variable data supplied by:
N/A
Message residence:
CEBDI, CEBDP, CEBDR, and
CEBVP
Message issued by:
CEBDI, CEBDP, CEBDR, or
CEBVP
JCB TERMINATED.
Explanation: The direct access device called
for cannot be initialized as a systeffis
residence volume due to a defective surface
on cylinder 0, track O.
The device to be
initialized must be replaced and the job
restarted.
Conversational Action
User:
N/A
System:
N/A
Nonconversational Action
User:
N/A
system:
N/A
Reference Data (Also see AFpendix E-08.)
Requirement deterrrined by:
CEBDI
Variable data supplied by:
N/A
Message residence: CEBDI
Message issued by:
CEBDI
CEB105A DEFINE INPUT DEVICE.
CEB108A HA OR RO FIELD EAD.
DEVICE DUMP
DASDI ••• n
DUMP RESTORE ••• n
JOB TERMINATED.
01'.
TSS
146
Explanation: The direct access device
requested cannot be initialized due to a
Page of GC29-2031-1. Issued Sept. 30. 1912 by TNL GN28-3220
defective surface in the home address or
track descriptor record areas. The job is
terminated.
Conversational Action
User: N/A
system: NI'A
Nonoonversatiopal Action
Oser; Direct access device should be
replaced and the job restarted.
system: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBDI
Variable data supplied by: N/A
Message residence: CEBDI
Message issued by: CEBDI
CEB109A TRACK CBR INDICATES TRACK IS GOOD.
Explanation: This message is produced as a
result of the GE~ALT option of DASDI having
checked the track specified in the control
statement. The track in question was found
to be 90od, and no alternate track was
assigned.
Conversational Action
User: IVA
system: NI'A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-08.)
General Messages
146.1
Requirement determined by:
variable data supplied by:
Message residence: CEBDI
Message issued by: CEBDI
CEBDI
N/A
CEB110I BAD TRACK cccchhhh.
Explanation: A defective track was found at
cylinder cccc track hhhh.
(Applies to SAM
initialized volumes only.)
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: Wi'.
System: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBDI or CEBDR
Variable data supplied by: CEBDI or CEBDR
Message residence: CEBDI and CEBDR
Message issued by: CEB!:! 0:1: CEBDR
CEB111I ALTERNATE cccchhhh.
Explanation: An alternate track at cylinder
cccc track hhhh has been assigned to replace
the defective track specified in message
CEB110I.
(Applies to SAM initialized
volumes only.)
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User: N/A
Systerr: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBDI or CEBDR
Variable data supplied by: CEBDI or CEBDR
Message residence: CEBCI and CEBDR
Message issued by: CEBD! or CEBDR
CEB112W ALT TRACKS DEPLETED.
JOB TERMINATED.
Explanation: The nuwber of altcernate tracks
assigned has exceeded the maximum number for
this device. The direct access device
should be replaced and the job restarted.
Conversational Action
User. N/A
System: N/A
Nonconversational Action
User: N/A
Systerr,: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBCI
Variable data supplied ty:
N/A
Message residence: CEBCI
Message issued by: CEBDI
CEB113\, IMPROPER VTOC BEGIN ADDRESS.
TERMINATED.
JCB
hxplanation: The starting address for the VTOC
cannot be cylinder 0 track () for any
direct-access device, or cylinder 0 track 1
for a 2311 device if IPLTXT has been
specified in the control statements, or any
alternate track, or cylinder 199 for any VA~
formatted 2311 or 2314. The operator should
change the ST~TADR keyword operand of the
V'IOCD control statement te a legal value and
restart the job.
Conversat.ional Action
User:
N/A
System: N/A
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEEDI
Variable data supplied by: N/A
Message residence: CEBDI
Message issued by: CEBDI
CEE141A BAD TRACK ON CYL 199.
KEY TO CONTINUE.
DEPRESS INTERRUPT
Explanation: This is a warning that the
Standard Error Retry Cylinder on the
to-·device has a bad track. Continuation is
at the user's discretion, but 'ISS error
recovery procedures may rr~sccnstrue cause of
future I/O errors as hardware instead of
surface.
Conversational Action
User: N/A
System: N/A
Ncnconversational Action
User: Depress interrupt key to continue.
otherwise, abort job.
System: Waits for response, then continues.
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEEDR
Variable data supplied by: N/A
Message residence: CEBDR
Message issued by: CEBDR
Lestination
Conversational: N/A
Nonconversational: Operator's Terminal
CEB142I PAGES WERE RELOCATED THAT WERE NOT IN ANY
DATA SET.
Explanation: A format B OSCB exists that has
no DSCB pointing to it or some other
abnormality in the VTOC exists such that a
page not in a data set is relecated.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: Dump the VTOC and examine it for the
error. Usually the error can be ignored.
Systen,: IIl1Illediately goes to end of job
without waiting.
Reference Data (Also see Appendix E-08.)
Requirement determined by: CEEDR
Variable data supplied by: N/A
Message residence: CEBDR
Message issued by: CEBDR
CEB152W PROGRAM INTERRUPT.
JOB TERMINATED.
Explanation: A program interrupt has occurred
resulting in termination of the job. This
is a system error.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
Syste(f,: N/A
Reference Data (Also see Appendix B-08.)
General Messages
147
Requirement determined by: CEBDI, CEBDP,
CEBDR, or CEBVP
Variable dated supplied by:
N/A
Message residence:
CEBDI, CEBDP, CEBDR, and
CEBVP
issued hy:- CEBLI, CEBDP, CEBDR, or
Message residence:
CEBVP
Message issued by:
CEBVP
CEB156A READY TAPE cuu.
CEBI,:;3A 'l'YPEWIUTER FAILED TO READ LAS'! MESSAGE.
DEPRESS IN'TEHRUPT KEY.
2"J?la!l~tion;"
The con"ole typewriter failed to
read tbe last input messaqe. This is a
system error.
Depress the int:errupt key on
the console and enter the message again.
CQ!~ve rsa ti 2pa !~cti_on
User:
N/A
Syst:em:
N/A
):'!2I!conve !"~§c ti '2llil.l_:'L~~~2I!
User:
N/A
SysterL:
N/ A
Reference Data (Also see Appendix B-08.)
----Requi rement determined by:
CEECI. CEBDP,
CEBDR, or CEBVP
VariatlE> dat:a supplied by:
N/A
t'lessage residence:
CEBDI, CEBDP, CEBDR, and
CEBVP
I'Jessage issued by:
CESDI, CEBDP, CEBDR, or
CEBVP
CEB154A HEADY PEADER
CUll.
DEPRESS INTERRUPT KEY.
Exp~nat.is?I!1
Ull bas a
The card reader, channel c, un~it
card jam, ,I transport. jam, 01" is
out of ci'lrds.
Conversat:i onaJ,_='I£tion
User:
N/A
Syst~]m:
N/A
Nonconv_e:t"sa~iona.!.J\~ti0!.l
User:
Operator corrects faulty condition
and depresses interrurt key on console.
System: Waites and lllessage is repeated lmtil
response is received; system then
continues.
E~ference Da!"
Requirement determined by: CEBDR
Variable data supplied by: N/A
Message residence: CEBDR
Message issued by: CEBDR
CEB166A NOT A RESTORE VOL. ON cuu.
VOLUME. DEPRESS INTERRUPT KEY.
MOUNT PROPER
Explanation: The tape on channel c, unit uu is
not a restore tape or was not built by the
TSS DUMP/RESTORE program.
Conversational Action
User: N/A
System: N/A
Ncnconversational Action
User: Operator should mount the correct
tape and depress the console interrupt
key.
System: Message is repeated until response
is received; system then continues.
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBDR
Variable data supplied by: CEBDR
Message residence: CEBDR
Message issued by: CEBDR
CEB180W INVALID FORMTYPE DSCB.
JOB TERMINATED.
Explanation: The VTOC contains SAM DSCBs, tut
FORMTYPE specifies VAM formatting.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBDR
Variable data supplied by: N/A
~essage residence:
CEBDR
Message issued by: CEBDR
CEBl81I 2301 PAGING FORMAT PROCEEDING. ALL
FARAMETERS EXCEPT DEVICE, BYPASS AND FORMTYPE
IGNOREL.
EXElanation: Notification that the 2301 drum
is being initialized in modified VAM format,
with no volUEe label, IPL records, or VTOC.
Additional function defining statements are
unnecessary.
Conversational Action
User: N/A
System: N/l\
Nonconversational Action
User: N/A
Systerr: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBDI
VariaLle data supplied by: N/A
Message residence: CEBDI
~essage issued by:
CEBDI
General Messages
149
CEB186D DEFECTIVE TRACK ON ERROR RETRY
CYLINDER/TRACK ccc hh ABORT JOB OR DEPRESS
INTERRUPT KEY
Explanation: Cylinder cce, track hh has been
found to be defective. Cylinder ccc is the
error retry cylinder for this device. The
option to abort the job or to continue by
depressing the console interrupt key may be
taken at the user's discretion; however this
device may not be used for TSS.
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User: Depress console interrupt key to
continue, or change device and restart
job.
System: Waits until response is received,
then continues processing.
Reference Data (Also see AFpendix B-08.)
Requirement determined by: CEBDI
Variable data supplied by: CEBDI
Message residence: CEBCI
Message issued by: CEBDI
CEB187W VTOC DOES NOT SATISFY TSS STANDARDS.
TERMINATED.
CEB192W VTOC REQUIRES MORE SPACE THAN ALLOCATED.
JOB TERMINATED.
Explanation: The extent specified for the
volume table of contents will not Fermit
allocation, or the STRTADR control statement
does not permit full extent for the VTOC.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: Correct faulty condition and restart
the program.
System: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBDI or CEBDR
Variable data supplied by: N/A
Message residence: CEBDI and CEBDR
Message issued by: CEBDI or CEBDR
JOB
Explanation: The format c (DADSM) DSCB was not
the second DSCB in the VTOC.
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBDR
Variable data supplied by: N/A
Message residence: CEBDR
Message issued by: CEBDR
CEB190W TRACK ONE BAD JOB TERMINATED
Explanation: The direct access device cannot
be initialized as an IPL device due to a
defective surface on cylinder 0, track 1.
The device should be reFlaced and the job
restarted.
Conversational Action
User:
N/A
Systelr.: N/A
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBDI
Variable data supplied by: N/A
Message residence: CEBDI
Message issued by: CEEDI
CEB191W INVALID FROM-DEVICE
Explanation: The FROMDEV operand on a PRINT
card is not a DASD (direct access storage
device).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User:
N/A
150
Systell': N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBDP
Variable data supplied by: N/A
l>Cessage residence: CEBDP
Message issued by: CEBDP
CEB193D DUE TO BAD TRACKS ON TODEV, ~AXIMUM EXTENT
COUNT EXCEEDED IN THE FOLLOWING DATA SET: dsnaroe,
DEPRESS INTERRUPT KEY TO CONTINUE.
Explanation: The count of extents is a byte
field in the Format A DSCB. Relocation of
pages has required new extents in the nalted
data set with the total now exceeding 255.
The excess over 256 was placed in the byte
field.
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User:
If the data set named will not be
used, continue by depressing the
interruFt key. Otherwise use another
disk pack for the to-device and restart
the job.
System: Waits until interrupt key is
depressed then continues at paint error
was detected.
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBDR
Variable data supplied by: CEEDR
Message residence: CEBDR
Message issued by: CEBDR
Destination
Conversational: N/A
Nonconversational: operator's Terminal
CEB194D DUE TO BAD TRACKS ON TODEV, NOT ENOUGH
SPACE IN VTOC FOR THE FOLLOWING DATA SET: dsname.
DEPRESS INTERRUPT TO CONTINUE.
Explanation: The relocation caused the need
for additional extents.
There is neither
room in the Fresent DSCB for more extents
nor room in the VTOC for move DSCBs for the
named da ta set.
Ccnversational Action
User: N/A
System: N/A
Ncnconversational Action
User:
If the data set is not to be used,
depress the interrupt key. Otherwise
replace the to-device with a new disk
pack and restart the job.
System: Waits until the interrupt key is
depressed, then continues, ignoring the
additional extents for which there was no
space.
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBDR
Variable data supplied by: CEBDR
Message residence: CEBDR
Message issued by: CEBDR
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
SAM) •
System: Checks for valid response and
continues. If an invalid response is
given, the message is repeated with
RECOGNIZED sucstituted for SPECIFIED.
If
incorrect FORMTYFE is given, it will be
detected at a later stage in the
processing by the usual procedures.
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBDR
Variable data supplied by: N/A
Message residence: CEBDR
Message issued by: CEBDR
C:EB2011 COMMAND REJECT cuuxxssssyyyy.
CEB195D VTOC DOES NOT MEET TSS STANDARDS FOR THE
FOLLOWING DATA SET: dsname. DEPRESS INTERRUPT
KEY TO CONTINUE.
Explanation: The chain of DSCB's in the named
data set included a DSCB that was not marked
"FB". continuing might mean that relocated
pages will be lost.
FUrther errors could be
caused by use of bad data, if continued.
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User: Dump the VTOC to determine cause of
error.
System: Waits until the interrupt key is
pressed, then attempts recovery, assuming
that the chained DSCB was a Forrr~t B
OSCB, even though it remains unmarked.
Reference Data (Also see Appendix B-OB.)
Requirement determined by:
CEBDR
Variable data supplied by: CEBDR
Message residence: CEBDR
Nessage issued by: CEBDR
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
CEBi95W' INCORRECT TO-DEVICE.
JOB TERMINATED.
Explanation: An invalid output device has been
specified.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBDP
Variable data supplied by: N/A
Message residence: CEBDP
Message issued by: CEBCP
RECOGNIZED}
ENTER Vi, V2, OR
CEB197A FORMI'YPE NOT { SPECIFIEr;
s.
Explanation: FORMTYPE operand was omitted from
DUMP or RESTORE card.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: On console typewriter, enter either
Vi (for VAM1), V2 (for VAM2) , or S (for
Explanation: The specified channel has
rejeoted an incorrect channel corr~and word
(CCW). The job is terminated. c = channel;
uu = unit; xx = command code; ssss = status
bytes from the channel status word; yyyy =
the sense tytes. This is a hardware error.
Ccnversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBVP
Variable data supplied by: CEBVP
Message residence: CEBVP
Message issued by: CEBVP
CEB20iW CO"'MAND REJECT cuuxxssssyyyy.
Explanation:
(See CEB201I, above.)
Ccnversational Action
User:
N/A
System: N/A
Nenconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBDI, CEBDP or
CEBDR
Variable data supplied by: CEEDI, CEBDP, or
CEBDR
Message residence: CEBDI, CEBtP, and CEBDR
Message issued by: CEBDI, CEBDP, or CEBDR
CEB202A INTERV.
REQUIRED cuuxxssssyyyy.
Explanation: The device or channel c unit uu
requires operator intervention to make it
ready.
xx = command code; ssss = status
bytes frem the CSW; yyyy = sense bytes.
This is the first of a two part IEessage.
The second part contains specific
information about the device and what the
operator response should be.
Conversational Actio~
User:
N/A
System: N/A
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBDI, CEBDP,
CEBDR. or CEBVP
Variable data supplied by: CEBDI, CEBDP,
CEBDR, or CEBVP
General Messages
151
l>1essage residence:
CEBVP
Message issued by:
or CEBVP
CEB2031 BUS OU'1' CHECK.
CEBDI, CEBDP, CEBDR, and
CEBDI, CEBDP, or CEBDR,
CEBDR
Variable data supplied by: CEBDI, CEBDP, or
CEBDR
Message residence: CEBDI. CEBDP, and CEBDR
Message issued by:
CEEDI, CEEDP, or
cuuxxssssyyyy.
CEB2051 DATA CHECK.
Explanation: A bus out check has occurred on
channel c unit uu.
The job is terminated.
xx = command code; ssss = status bytes from
the CSW; yyyy = sense bytes.
This is a
hardware error.
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBVP
Variable data supplied by: CEBVP
Message residence:
CEBVP
Message issued by: CEBVP
CEB203W BUS OOT CHECK.
cuuxxssssyyyy.
Explanation:
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by:
CEEDI, CEBDP, or
CEBDR
Variable data supplied by:
CEEDI, CEBDP, or
CEBDR
Message residence:
CEBDI, CEBDP, and CEEI:R
Message issued by: CEBDI, CEBDP, or CEBDR
cuuxxssssyyyy.
Explanation: An equipment failure has
occurred.
The job is terminated.
c
channel; uu = unit; xx = command code;
ssss = status bytes from the csw; yyyy
sense bytes. This is a hardware error.
Conversational Action
User:
N/A
System:
N/l\
~onconversational Action
User:
N/A
System:
N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBVP
Variable data supplied by:
CEBVP
Message residence:
CEBVP
Message issued by:
CEBVP
CEB204W EQUIPMENT CHECK.
Explanation: A solid data check has occurred
on the specified device.
The job is
terminated.
c = channel; uu = unit; xx =
command code; ssss = status bytes from CSW;
yyyy = sense bytes. This is a hardware
error.
Conversational Action
User: N/A
System:
N/A
Nonconversational Action
User: N/A
System:
N/A
Reference Data (Also see Appendix 8-08.)
Requirement determined by: CEBVP
Variable data supplied by:
CEEVP
Message residence: CEBVP
Message issued by:
CEBVP
cuuxxssssyyyy.
Explanation:
(See CEB203I, above.>
Conversational Action
User:
N/A
System:
N/A
Nonconversational Action
Oser:
N/A
System: N/A
Reference Data {Also see Appendix B-08.}
Requirement determined by:
CEBD1, CEBDP, or
CEBDR
Variable data supplied by:
CEBDI, CEBDP, or
CEBDR
Message residence:
CEBDI, CEBDP, and CEBDR
Message issued by: CEBDI, CEBDP, or
CEB204I EQUIPMENT CHECK.
cuuxxssssyyyy.
CEB2061 OVERRUN.
cuuxxssssyyyy.
Explanation: An overrun check has occurred on
the specified channel. The job is
terminated. c = channel; uu = unit; xx =
command code; ssss = status bytes from the
channel status word; yyyy = sense bytes.
This is a hardware error.
Conversational Action
User:
N/A
Systerr: N/A
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEEVP
Variable data supplied by: CEBVP
Message residence:
CEBVP
Message issued by: CEBVP
CEB206W OVERRUN.
cuuxxssssyyyy.
Explanation:
(See CEB206I, above.)
Conversational Action
User: N/A
System:
N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-OS.)
Requirement determined by: CBBDI, CEBDP, or
CEBDR
Variable data supplied by: CEBDI, CEBDP, or
CEBDR
Message residence: CEBDI, CEBDP, and CEBDR
Message issued by: CEBDI, CEBDP, or CEBDR
CEB207W FLAGGED TRACK.
cuuxxssssyyyy.
Explanation: A track condition check has
occurred on the specified device. The job
is terminated.
c ; channel; uu
unit; xx
command code; ssss = status bytes from the
channel status word; yyyy = sense bytes.
This is a hardware error.
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBDI or CEBDR
Variable data supplied by: CEBDI or CEBDR
Message residence:
CEBDI and CEBDR
Message issued by: CEBDI or CEBDR
=
CEB208W DATA CONV.
CHECK.
cuuxxssssyyyy.
Explanation: A data converter check has
occurred on the specified device. The job
is terminated. c = channel; uu = unit: xx
command code; ssss = status bytes from the
channel status word; yyyy = sense bytes.
This is a hardware error.
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User:
N/A
Systerr,:
N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBDI, CEBDP, or
CEBDR
Variable data supplied by: CEBDI, CEBDP, or
CEBDR
CEBDI, CEBDP, and CEBDR
Message residence:
Message issued by:
CEBDI, CEBDP, or CEBDR
CEB2091 END OF CYLINDER.
cuuxxssssyyyy.
BXFlanation: An unusual end of cylinder has
occurred on the specified device.
The job
is terminated.
c = channel: uu = unit; xx
command code; ssss = status bytes from the
channel status word; yyyy = sense bytes.
This is a hardware error.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by:
CEBVP
Variable data supplied 1:y: CEBVP
Message residence: CEBVP
Message issued by: CEBVP
CEB209W EN!: OF CYLINDER.
cuuxxssssyyyy.
Explanation:
(See CEB209I, above.>
Conversational Action
User:
N/A
system: N/A
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBDI. CEBDP, or
CEBDR
Variable data supplied by:
CEBDI, CEBDP, or
CEBDR
Message residence: CEBDI, CEBDP, and CEBDR
Message issued by: CEBDI, CEBDP, or CEBDR
CEB210W INVALID ADDRESS.
cuuxxssssyyyy.
~lanation:
An invalid address has been
issued to the specified device. The job is
terminated.
c = channel; uu = unit; xx =
command code; ssss = status bytes from the
channel status word; yyyy = sense bytes.
This is a hardware error.
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by:
CEBDI, CEBDP, or
CEBDR
Variable data supplied by:
CEBDI, CEBDP, or
CEBDR
Message residence:
CEBDI, CEBDP, and CEEDR
Message issued by: CEBDI, CEBDP, or CEBDR
CEB211I NOT AVAILABLE.
cuuxxssssyyyy.
EXFlanation: The specified device is not
attached to the system.
The job is
terminated. c = channel; uu = unit; xx
corrmand code: ssss = status bytes from the
channel status word: yyyy = sense bytes.
This is a hardware error.
Conversational Action
User: N/A
Systen,:
N/A
Nonconversational Action
User:
N/A
Systenl: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBVP
Variable data supplied by: CEEVP
Message residence: CEBVP
Message issued by: CEBVP
CEB211W NOT AVAILABLE.
cuuxxssssyyyy.
EXFlanation:
(See CEB211I, above.)
Conversational Action
User: N/A
SY~iten;:
N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-OS.)
Requirement determined by: CEBDI, CEBDP, or
CEBDR
Variable data supplied by: CEBDI, CEBDP, or
General Messages
153
CEBDR
Message residence:
Message issued by:
CEBDI, CEBDP, and CEBDR
CEBDI, CEBDP, or CEBDR
CEB212W READ DATP. CHECK.
cuuxxssssyyyy.
Explanation: A permanent read data check has
been detected en the specified tape unit.
The job is terminated. c = channel; uu =
unit; xx = command code; ssss = status bytes
from the channel status word; yyyy = sense
bytes.
This is a hardware error.
Conversational Action
User:
N/A
SJrstelL: tVA
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBDI, CEBDP, or
CEBDR
Variable data supplied by: eEBDI, CEBDP, or
CEEDR
Message residence: CEBDI, CEBDP, and CEBDR
Message issued by: CEBDI, CEBDP, or CEBDR
CEB213I COUNT FIELD CHECK.
cuuxxssssyyyy.
EXFlanation: A data check has occurred in the
count field of the specified direct-access
device. The job is terminated.
c =
channel; uu = unit; xx = command code; ssss
= status bytes from the channel status word;
yyyy = sense bytes. This is a hardware
error.
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBVP
Variable data supplied by: CEBVP
Message residence: CEBVP
Message issued by: CEBVP
CEB213W COUNT FIELD CHECK.
cuuxxssssyyyy.
Explanation:
(See CEB213I, above.)
Conversational Acti9n
User: N/A
System: N/A
Nonconversational Actio!!
User:
N/A
System: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBDI or CEBDR
Variable data supplied by: CEBDI or CEBDR
Message residence:
CEBDI and CEBDR
Message issued by:
CEBCI or CEBDR
CEB2141 TRACK OVERRUN.
cuuxxssssyyyy.
Explanation: A track overrun condition has
occurred on the specified direct access
device. The job is terminated.
c =
channel; uu = unit; xx = corr~nd code; ssss
= status bytes from the channel status word;
yyyy = sense bytes. This is a hardware
error.
154
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix E-08.)
Requirement determined by: CEBVP
Variable data supplied by: CEBVP
Message residence: CEBVP
Message issued by: CEBVP
CEB214W OVERRUN.
cuuxxssssyyyy.
Explanation:
(See CEB214I, above.)
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-08.)'
Requirement determined by:
CEBDI, CEBDP, or
CEBDR
Variable data supplied by: CEBDI, CEBDP, or
CEBDR
Message residence: CEBDI, CEBDP, and CEBI:R
Message issued by: CEEDI, CEBDP, or CEBDR
CEB215W FILE PROTECTED.
cuuxxssssyyyy.
Explanation: The specified device is file
protected. The job is terminated.
c =
channel; uu = unit; xx = cOJrrr.and code; ssss
= status bytes from the channel status word;
yyyy = sense bytes.
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEEDI, CEBDP, or
CEBDR
Variable data supplied by:
CEEDI, CEBDP, or
CEBI:R
Message residence: CEBDI, CEBDR, and CEBI:R
Message issued by: CEBDI, CEBDP, or CEBDR
CEB216w DASD = END OF FILE.
cuuxxssssyyyy.
Explanation: An unusual end of file has
occurred on the sfecified direct acoess
device. The job is terminated. c =
channel; uu = unit; xx = command code; ssss
= status bytes from the channel status word;
yyyy = sense bytes. This is a hardware
error.
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEEDI or CEBDR
Variable data supplied by: CEBD! or CEBDR
~essage residence:
CEBDI and CEEDR
Message issued by: CEEDI or CEBDR
CEB217I NO RECORD FOUND.
cuuxxssssyyyy.
Explanation: A no-record-found condition has
occurred on the specified direct access
device.
The job is terminated. c =
channel: uu = unit; xx = command code; ssss
status bytes from the channel status word:
yyyy = sense bytes. This is a hardware
error.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Afpendix B-08.)
Requirement determined by: CEBVP
Variable data supplied by: CEBVP
Message residence: CEBVP
Message issued by: CEBVP
=
CEB217W NO RECORD FOUND.
cuuxxssssyyyy.
Explanation:
(See CEB217I, above.)
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBDI, CEBDP, or
CEBDR
Variable data supplied by: CEBDI, CEBDP, or
CEBDR
Message residence: CEECI, CEBDP, and CEBDR
Message issued by: CEBCI, CEBDP, or CEBDR
CEB218I INVALID ERROR.
cuuxxssssyyyy.
Explanation: An invalid error return has
occurred. The job is terminated. c =
channel; uu = unit; xx = command code; ssss
= status word; yyyy = sense bytes. This is
a hardware error.
Conversational Action
User: N/A
System: N/A
Noncon~ersaticnal Action
User: N/A
System: N/l\
Reference Data (Also see Appendix B-08.)
Requirement determined ty: CEBVP
Variable data supplied by: CEBVP
Message residence: CEBVP
Message issued by: CEBVP
CEE218W INVALID ERROR.
cuuxxssssYl'YY.
Explanation:
(See CEB218I, above.)
Conversational Action
User:
N/A
SysteJIl: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBDI, CEBDP, or
CEBDR
Variable data supplied by: CEBDI, CEBDP, or
CEBDR
Message residence:
Message issued by:
CEB219I WRONG ERROR.
CEBDI, CEBCP, and CEBLR
CEBDI, CEBDP, or CEBDR
cuuxxssssyyyy.
Explanation: The error return is valid, but is
not associated with the specified device.
The jot is terminated. c = channel; uu =
unit; xx = command code; ssss = status bytes
from the channel status word; yyyy = sense
bytes. This is a hardware error.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBVP
Variable data supplied by: CEEVP
Message residence: CEBVP
Message issued by: CEBVP
CEB219W WRONG ERROR.
cuuxxssssyyyy.
Explanation:
(See CEB219I, above.)
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBDI, CEBDP, or
CEBDR
Variable data supplied by: CEBDI, CEBDP, or
CEBDR
Message residence: CEBDI, CEBDP, and CEBDR
Message issued by: CEBDI, CEELP, or CEBDR
CEB220I CHAN.
CTRL ERROR.
cuuxxssssyyyy.
Explanation: A channel contrel check has
occurred on the specified channel. The job
is terIr.inated. c = channel; uu = unit; xx =
command codes; ssss = status bytes from the
channel status word; yyyy = sense bytes.
This is a hardware error.
Conversational Action
User:
N/A
System: N/A
Nonconver sa tiona 1 Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBVP
Variable data supplied by: CEBVP
Message residence: CEBVP
Message issued by: CEBVP
CEB220W CHAN.
CTRL.
ERROR.
cuuxxssssyyyy.
Explanation:
(See CEB220I, above.)
Conversational Action
User: N/A
System: N/l\
Nonconversational Action
User: N/A
System: N/A
General Messages
155
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBDI. CEBDP. or
CEBDR
Variable data supplied by: CBBDI, CEBDP, or
CEBDR
Message residence: CEBDI, CEBDP. and CEBDR
Message issued by: CEBDI, CEEDP, or CEBDR
CEB221I INTERFACE ERROR.
cuuxxssssy1'1'1'.
Explanation: An interface control check has
occurred on the specified channel. The job
is terminated.
c = channel; uu == unit; xx
command code; ssss == status bytes from the
channel status word; 1'1'1'1' == sense bytes.
This is a hardware error.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-08.)
Requirement determined by: CEBVP
Variable data supplied by: CEBVP
Message residence: CEBVP
Message issued by: CEBVP
CEB221W INTERFACE ERROR.
cuuxxssssyyyy.
Explanation:
;er:
N/A
System:
N/A
Reference Data (Also see Appendix B-08.)
Requirement determined ny: CEBDR
Variable data supplied by:
N/A
Explanation: System is prompting the operator
for the terminal address.
The address
shculd be entered in the form abcd
(a=channel control unit, b=channel,
c=control unit, and d=device), where a, b,
c, and d are hexadecimal digits. For the
terminal, the first two characters must be
zeros, and the third must be different from
the control unit identifying the operator's
terrrinal.
Conversational Action
User:
N/A
SysteIl':
N/A
Nonconversational Action
User: Operator must respond by typing in
four-character manager terminal address
in the format described atove.
System: Waits and issues one of messages
CEIF14I, CEIF09I, or CEIFI0I depending on
errcr; then repeats this rressage.
Reference Data (See Appendix B-09.)
General Messages
169
CEIl"OSW TYPE ACV DEVICE ADDRESS
Explanation:
System is prompting the operator:
for ACV device address. The address should
be entered in the form abcd I
SOURCE. data set name NOT
Explanation: Referenced data set does not have
an indexed-sequential organization.
Filter Code: WSA
co;versatiOnal Action:
User:
Enters ne .. data set naIf.e.
System: Awaits response.
Nonconversational Action:
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12)
Requirement determined by: CFADA
Variable data supplied by:
CFADA
CFADA007 CANCELLED:
UNIQUE
SOURCE.data set name NOT
Explanation:
Specified data set name is a
dUl,licate.
Filter Code: WSA
General Messages
175
Conversational Action
User:
Enters another data set name.
System: Awaits responSe.
Nonconversational Action N/A
System:
continues processing.
Reference Data (Also see Appendix £-12)
Requirement determined by: CFADA
Variable data supplied ty:
CFADA
CFADA008 CANCELLEL:
INVAI,ID
I::DNAME data definition name
Explanation:
The user has entered a name that
does not conform to system standards.
F'ilter Code:
WSA
Conversational Action
User:
Enters new data definition name.
System:
Awaits response.
Nonconversational Action
User:
N/A
System:
Continues processing.
Reference Data (Also see Appendix B-12)
Requirement determined t:y: CFADA
Variatle data supplied by: CFADA
CFADA009 CANCELLED:
INVALID START LINE nl
Explanation:
Starting line number has been
incorrectly specified; the system expects a
new entry. The new entry must be a multiple
of 100 (3-7 digits); zero is invalid.
Filter Code: WSA
Conversational Action
User:
Specify a starting line number that
is a multiple of 100, and 3-7 digits
long.
Zero is invalid.
System: Awaits respon£;E.
Nonconversational Action
USEr:
N/l\
System: continues processing.
.Reference Data (Also see AFpendix B-12}
Requirement determined 1:;y:
CFADA
Variable data supplied by: CFADA
CFADA010 CANCELLED:
INVALID INCREMENT LINE numi,er
~lanation:
The increment line number has
been incorrectly s!=,ecified;the syst.Err,
expects a new entry. The new entry must be
a multiple of 100 (3-7 digits); zero is
invalid.
Filter Code:
WSA
Conversational Action
-- 'User:
Specify a new increment line nmnber
that is a multiple of 100, and 3-7 digits
long.
Zero is inva.l.:i.d.
System:
Awaits J:es[.onse.
Nonconversational Action
User:
N/A
System:
Continues procEssing.
Reference Data (Also see Appendix B-12)
.
Requirement determined by:
CFADA
Variable data supplied ty: CFALA
Il'i'VALID MACRO LIB.
CFADA011 CANCELLED:
data definition narr,e
DDNAMB is
The systen. doee; not recognize the
s:pecified n:acro library. and Expects the
macro library ddnames to Le respecified.
The data set disposi.tion Il'ust not be new.
§:!U21anat~2l}:
176
Enter (DDNAME DDNAME) for source and index
portions of supplementary macro libraries.
Filter Code: WSA
Conversational Action
User:
Enters (DDNAME.DDNAME) for source and
i.ndex portions of supplementary macro
libraries.
System: Awaits response.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12)
Requirement determined by:
CFADA
Variable data supplied by:
N/A
CFADA012 CANCELLED:
SOURCE DATA SET
UNABLE TO MOUNT VOLUME FOR
FINDDS (CZAEC) returned a cede of
to the language processor. indicating
that the volume for the source data set
could not be mounted.
possiLle cause: the
volullie is in use by another task.
Filter Code:
WSA
Ccnversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see ApFendix E-12.)
lCODULE?
Explanation:
Erase the member with duplicate
alias, or DDEF a new JOBLIE, or release the
top JOBLIB and issue a GO command.
The
u;odule will bEe stored in thE tor JOBLIB.
Filter Code:
XSA
Conversattonal Action
User:
Ent.ers JOBLIB name or defaults to
return to t.be command system.
System:
continues processing.
Nonconversational Action
User:
Enters JOBLIB nalf,e.
SY:3tem:
Conti nues frecessing.
Reference Data (Also see AFpendix B-12.J
Requirement det.ermined by:
CFADA
Variable data supplied by:
CFAGA
CFADA16i, DEFAUL'f 'ro REPLACE PREVIOUS MODULE
User:
N/A
System: A~its next command.
Ncnconversational Action
User:
N/A
System: Continues proceSsing.
Reference Data (Also see Appendix B-12)
Requirement determined by:
CFADA
Variable data supplied by:
N/A
CFADA200 JOBLIB NAME NOT UNIQUE.
JOBLIB NAME
~xplanation:
Enter a JOBLIB narre unique to the
current chain.
The JOBLIB narre entered rray
not be USERLIB or any JOE LIB in the TDT
chain.
Filter Code:
WSA
Conversational Action
User:
Either enters another JOBLIB name or
defaults to return to the comrrand system.
System:
continues processing.
Ncnconversational Action
User: N/A
System:
N/A
Reference Data (Also see ApFendix B-12.)
Requirement determined by: CFADA
Variable data supplied by:
N/A
CFADA300 THERE ARE integer DUPLICATE EXTERNAL
NAMES--PRINT THE~?
Explanation: The top JOBLIB contains an alias
or external name which is duplicated in the
current mcdule.
The module cannot be
st.owed.
Filter Code:
XSA
Conversational Action
User:
Enters "yo or "N", as desired (Y=O,
N=4) •
System:
If ny. is entered, issues rr;essage
CFADA400 and lists du[,licate external
names; if "N" is entered, continues
processing with next command.
Nonconversational Action
User:
N/A
System: Continues processing with next
command.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CFADA
Variable data supplied by:
CEADA
CFADA457 CANCELLED VERSION ID INVALIL
Explanation: A valid version ID contains 1 to
8 all'hameric characters.
Filter Code:
WSA
Conversational Action
User:
Enters a nEW version identification.
System: Awai t.s next corr·rr,and.
Ncnconversational Action
User:
N/A
~3ysteJ1l:
Explanation:
Cefault to overlay former
version, or enter new module narr,e.
The top
library in the ..lOBLIB chain contains a
modul e with the san'e narr;e as is fresently
being produced.
Default to replace former
version with new version, select new module
name for new module, or hit attention and
rearrange JOBLIBS.
Filter Code:
XSA
Conversational Action
178
REENTER NEW
Conti nUes processing.
Reference Data (Also see Appendix B-12)
Requirement determined by:
CFALA
Variable data supplied hy:
N/A
CFADB023 PROCEEDING:
LINE IGNORED
CCRRbCTION OD'ISILE DATA SE'I.
Explanation: The line that was to be corrected
does not exist in this data set.
Filter Code: WSA
Conversational Action
User:
N/A
system: Awaits next command.
Nonconversational Action
User: N/A
system: Continues processing.
Reference Data (Also see Appendix B-12)
Requirement determined by: CFADB
Variable data supplied by: N/A
CFADB037 PROCEEDING: LAST SOURCE .LINE IS number.
MISSING END CARD SUPPLIED
EXflanation: The user neglected to supply an
END statement with his program: one has been
supplied by LPC.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processinq.
Reference Data (Also see Appendix B-12.)
Requirement determined l:y: CFADB
Varial:le data supplied by: CFADB
CFADB378 PROCEEDING:
DELETED WAS line
END OF DATA SET.
LAST LINE
Explanation: User specified deletion that
overlapped end of source data set.
Deletions were perforrred to indicated line.
Filter Code: WSA
Conversational Action
User: N/A
Systerr.: Awaits next corrmand.
Nonconversational Action
User:
N/A
System: Continues processing
Reference Data (Also see Appendix B-12)
Requirement determined by: CFADB
Variable data sun:lied l:y: CFADB
User: N/A
system: continues processing.
Reference Data (Also see Appendix B-12)
Requirement determined by: CFADB
Variable data supplied by: N/A
CFBAA100 COl>lPILATION INITIATED (rr.odule name)
Explanation: A call to the compiler has been
indicated by the presence of a module name
or source data set name in the PL/I oorrrr.and.
The compiled module name is specified in the
Farentheses.
Filter Code: WSA
Conversational Aotion
User: N/A
System: Continues processing.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
~equirement determined by:
CFBAA
Variable data supplied by: CFBAA
CFBAA200 CONVERSION INITIATED
Explanation: Only a conversion will take
place, due to the lack of a rr,odule narr,e and
souroe data set name with a l>IERGELST and/or
MERGDS parameter.
It may also occur when
specified oompiler input is invalid and
~ERGELST and/or MERGEDS have been given as
parameters.
Filter Code: WSA
Conversational Action
User: N/A
System: Continues processing.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CFBAA
Variable data supplied by:
N/A
CFBAA300 COMPILATION COMPLETED.
CFADB379 PROCEEDING:
INVALID ./olODIFICATION REQUES'I
Explanation: The ITodification request has been
rejected as invalid.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next corrmana.
Nonoonversational Aotion
User:
N/A
system: Continues proceSsing.
Referenoe Data (Also see Appendix E-12)
Requirement determined ty: CFADB
Variable nata supplied by: N/A
CFADB388 CANCELLED:
DIGITS
NEXT LINE NUNBER EXCEEDS 7
Change start line and/or
increment to lower values. For exmnple:
default LINCR=(lOO,lOO).
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next cOmItand.
Nonconversational Action
Ex~lanation:
Explanation: The compiler has corrpleted all
processing requested during this
compilation.
Filter Code: ISA
Conversational Action
user: N/A
System: Continues with conversion.
processing which was indicated in PLI
cOIurand.
Nonconversational Action
User:
N/A
Systerr: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
CFEAA
Variable data supplied by: N/A
CFBAA400 LEVEL lev",l HIGHEST ERROR DETECTED module name
Explanation: For a Single module, the
indicated error level is the highest error
level within that module. For multiple
proceSSing, the indicated level is the
highest level for all modules prooessed.
Level 3 indicates termination of processing
General Messages
179
- an unsucessful cOJDpilation or conversion.
.filter Code: WSA
Conversational Act.iort
User:
N/A
Systell': Awaits next cOlllll1and.
Ji2.!l_conve r§§.ti on.9J,--.l!~t i U[I
Use.c:
N/A
System: continues processing.
R~ferenc~Dat~ (Also see Afpendix B-12.)
Requirement detecwined ty:
CFBAA
Variable data supplied by: CFBAA
CFBllA600 MEMBER NAME UNKNOWN.
ENTER .
The source data set is a VPAM
data set cut no member name bas been given.
Filter Code: XSA
S:;onversational Action
User:
Enter the member nane.
System: Awaits user response.
Nonconversational Action
User: N/A
System:
N/A
Reference Data (See also Appendix B-12.)
Requirement determined by: CFBAA
Variable data supplied by: N/A
~xplanaticn:
CFBAAI+',O CANCELLED: TASK NOT IN A 24 BIT MODE.
gr:land!,l0D: The I'LiI compiler will execute
only in 24-bit mode.
Filter code:
XSA
Co-;:;-versational Action
- ..-U~;er:-··Log off and log on dgain in 24-bit
mode.
Sys't.em:
l\iNai.ts next corr,rr,anQ"
Nonconversational Action
l)c,er:
N/l\
Syo3t.en:: Terminates task.
!ief~Eenc€_Data (I,l so see Appendix B-12.)
Requirement determined l:;y'
CFBAA
VariaU.€ data supplied by; N/A
CFBAA500 MODUlo]', NAME INVALIC.
RESPCN[;'
'I'he module name supplied is
longe:r· than eight characters or contains an
invalid charact.er.
When a fllodule name is
not supplied, the source data set name is
unacceptable .
CFBAA650 COMPILATION BYPASSED: SOURCEDS MEMBER
NAME UNKNOWN.
Exp!anation: For a nonconversational task, the
source data set is a VPAM data set without
having a member name specified.
Filter Code: XSA
Conversational Action
User:
N/A
Systerr,: N/A
Nonconversational Action
User:
N/A
Syst.err: compilat ion is bypassed. System
checks if any object modules are to be
merged.
Reference Data (See also Appendix B-12.)
Requirement. deterroined by:
CFEl',A
Variable data supplied by:
N/A
}2~r:lanat:ion:
.fcLLi:.er
cadS',
XSA
.£9_Il~§r..O'~!:l..ond 1.
Ac t ion
Ent.er new module nan:e, or to bypass
compilation or conversion, default.
Tc
bypass both, enter an underscore.
The
user is allowed only one prompt for
module nal"'" p<'r compilation.
System: ~A.waits user's response.
~QPccnversational fIction
U''ier:
N/A
Sy~3terr:
IVA
geference Dat.<'l: (Also see Appendix B-12.)
Regui rement. deterrr,ined ty: Cr-BAA
Var iatl" data sUPFlied by: N/ II
U~,er:
CFBAA660 COMPIlATICN TERMINATEV:
CSCRG NO'r VIP
SOURCE MEMBER
The source member specified does
not have VISA1>l format for valid cOIl'piler
input •
Filter Code: WSA
Ccmversat ional Action
User:
NIl',
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues precessing.
Reference Data IAlso see Appendix B-12)
Requirement determined by: CFBAA
Variable data supplied by:
NIl',
I_~pJ,anation:
CFBAl',700 COMPILATION BYPASSED: SOURCE DATA SET NOT
ACCEPT'ABlE FCR~AT.
CFBAA550 COMPILATION BYPASSED: t·.ODULE NAME
INVALID.
For a nonconversational task,
P1JI is unable to use the i.jarameters
:::; uf-plied for an out;::ut nodule name, due t.o
invalid length or Characters.
Filter Code:
WSA
~::?ilv·-e r.§.'i t iona l __~cJ:_:0.f!
£:~Elanation:
ll:Acr:
N/il
System: N/A
Nonconversationa} Ac-tion
User:
N/A.
System: COllpilat.ion is bypassed; system
checks if any object modules are to be
n1ergEd ..
Reference Data (See also Appendix B-12.)
Requi r.ement determined 'cy:
CFBAA
Varia1;le data supplied by: N/A
180
E}(12lanatiql}: Arter opening, the s!=ecified data
set does not have a valid value in one of
the following fields:
r;SORG, LRECL, KEYLEN,
or RKP.
Filter Code: WSA
Conversational Action
User:
Check that DSORG=Vl cr VP, LREC! is
less than or equal to 132, REYLEN=7, and
RRP=4.
Syst.err: Processing continues with a
conversion attempt if indicated in a PLI
command.
Nonconv~~~ational Action
User: N/A
System:
Processing continues with a
conversion attempt if indicated in a PLI
corr.rrand.
~efer€nce Data (See also Appendix B-12.)
Requirement determined by:
Variable data sUf~lied by:
CFBAA
N/A
CFBM710 COMPILATION BYPASSED: UNAB.LE TO OPEN
SOURCE l-_EMBER.
Explanation: The FIND issued to oFen the
source member has issued a return code
indicating failure (B, 12, or 16), or when
the editor was invoked to create the member,
it could not be reopened (RC=4).
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues with a
conversion attempt if indicated in a PLI
command.
Nonconversational Action
User:
N/A
System: Processing continues with a
conversion attempt if indicated in a PLI
corranand.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CFBM
Variable data sUfplied ty: N/A
CFBM720 COMPILATION BYPASSED: UNAELE TO STOW NEW
SOURCE MEMBER.
Explanation: The STOW (new) issued against the
newly-created source member has returned a
code of 04, indicating the name is already
in use, or 14, indicating an invalid STOW
type was requested.
Filter Code: XSA
Conversational Action
User:
N/A
System: Continues [rocessing. Conversion
will be attempted, if indicated.
Nonconversational Action
User: N/A
System: Continues process inc,. Conversion
will be atterr.pted, if indicated.
Referer,ce Data (Also see Appendix B-12.)
Requirement determined by: CFBAA
Variable data supplied by:
N/A
CFBM750 COMPILATION BYPASSED: SOURCEDS DDEF
UNSUCCESSFUL.
Explanation: The DDEF issued to create a new
source data set has returned one of the
following codes:
04, DSNA~E undefined; 08,
DSNAME not unique; 10, CSORG inconsistent;
or BO, other.
Filter Code: wSA
Conversational Action
User:
N/A
System: processing continues with a
conversion attempt if indicated in PLI
command.
Nonconversational Action
User:
N/A
System: Processing continues with a
conversion attempt if indicated in PLI
command.
Reference Data (Also see Afpendix B-12.)
Requirement determined by: CFBAA
Variable data supplied ty:
N/A
CF'BAJ\760 COMPII-ATION BYPASSED:
SOURCEDS VOLUME.
UNABLE TO MOUNT
Explanati.on: FINDDS has returned an error code
indicating that the source data set volume
was not found or the device is not
availal::le.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues with a
conversion attempt if indicated in PLI
comxr,and.
Ncnconversational Action
User:
N/A
System: Processing continues with a
conversion attempt if indicated in PLI
command.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CFBAA
Variable data supplied by: CFBAA
CFBAA770 COMPILATION BYPASSED:
UNSUCCESSFUL.
LISTDS DDEF
Explanation: The DDEF issued to create a new
list data set has failed, either because of
an unsuccessful CATALOG issued to create a
new generation data group, or DDEF found a
problerr and returned a code of 04, 08, OC,
10, or 80.
Filter Code: WSA
Ccnversational Action
User:
N/A
System: Processing continues with a
conversion attempt if indicated in PLI
co!rrr:and.
Nonconversational Action
User:
N/A
System:
Processing continues with a
conversion atterr:.pt if indicated in PLI
command.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CFBAA
Variable data supplied by: N/A
CFBAABOO SOURCE DSNAME INVALID.
EN'IER.
The source data set name has been
found invalid for one of the following
reasons: rr.ore than 35 characters, an
lnvalid character, or more than 8 characters
in an index level.
Filter Code: XSA
Ccnversational Action
User: Re-enter source data set name.
System: Awai.ts user resfonse.
Ncnconversational Action
User:
N/A
System: N/A
Reference Data (Also see Affendix B-12.)
Requirement determined by: CFEAA
Variable data supplied by: N/A
~xplanation:
CFBAAB50 COMPIIATICN BYPASSED:
INVALID.
SOURCE DSNAME
Explanation: The source data set name has teen
found invalid for one of the following
reasons: more than 35 characters, an
invalid character, or more than 8 characters
in an index level.
General Messages
IBI
Filter Code: WSA
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: continues processing with
conversion attempt if indicated in PLI
cOlllIlland.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CFBAA
Variable data supplied by: N/A
CFBAA900 PROCEEDING:
PLC OPTION.
(option) IGNORED.
INVALID
Explanation: The option enclosed in
parentheses is not one of the valid set
which PLC recognizes. Valid options
are:PRINT, PRERASE, NOPRINT. DIAG, NODIAG,
CONT, NOCONT, LISTDS, LISTOUT,
LIMEN=(I,W,N,X, or T), BREVITY=(M,S,E,T, or
X) •
Filter Code: WSA
Conversational Action
User: N/A
System: Continues processing.
Nonconversational Action
User: N/A
System! Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CFBAA
Variable data supplied by: CFBAA
CFBAB100 MODULE name STOWED joblib1 joblib 2
joblib 3
Explanation: The output from the object data
set converter is a TSS formatted object
module which is st.owed into the last defined
JOBLIB.
If an older member of the same
JOBLIB has been named identically, it is
assumed that replacement was desired.
Filter Code:
ISA
Conversational Action
User: N/A
System: continues processing.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CFBAB
Variable data supplied by: CFBAB
CFBAB200 DUPLICATE ENTRY POINT NAMES ARE:
list
Explanation: This message is the result of
responding LIST or QUITLIST to CFBAB950.
It
is a list of the duplicate names detected.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command if QUITLIST was
entered; if LIST was entered, continues
process ing.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CFBAB
Variable data supplied by: CFBAB
182
CFBAB300 PROCEEDING: name IGNORED. CONTAINS
RESERVED SYSTEM NAME.
Explanation: Only system modules in TSS may
begin with the letters 'SYS'.
Filter Code: WSA
Conversational Action
User: N/A
system: Skips offending modules and
continues processing.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CFBAB
Variable data supplied by: CFBAB
CFBAB325 PROCEEDING:
FILE REJECTED
NON-STANDARD USE OF SYSOUT
Explanation: A non-standard declaration of
SYSOUT has been rejected. Only the standard
use of SYSOUT as a stream print file with no
environment options specified is acceptable
in TSS.
Filter Code: WSA
Conversational Action
User: Rename SYSOUT file and recompile, or,
if standard environment declared, ignore
message.
System: Assumes that SYSOUT is a standard
file.
Nonconversational Action
User: Rename SYSOUT file and recompile, or,
if standard environment declared, ignore
message.
System: Assumes that SYSOUT is a standard
file.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CFBAB
Variable data supplied by: N/A
CFBAB350 PROCEEDING: MODULE BYPASSED. DUPLICATE
ENTRY (entry name) FOUND IN module name
Explanation: The module being converted was
found to have duplicate entry names. This
can be caused by PLI truncating two
different names to the same name.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CFBAB
Variable data supplied by: CFBAB
CFBAB400 MODULE SKIPPED.
CONVERT.
MODULE name TOO LARGE TO
Explanation: The module being converted
exceeds the maximum size permitted under TSS
(256 pages), or internal work areas have
overflowed.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next cOlllIlland.
Nonconversational Action
User: N/A
System: Terminates conversion for this
module. continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CFBAB
Variable data supplied by: CFBAB
CFBAB500 MODULE SKIPPED.
IN LOAD DATA SE'I.
FORMAT type ESD DETECTED
Explanation: The reported ESD type is not one
of the types generated l::y the PL/I compiler.
The containing module therefore is not a
PL/I compiler formatted object module and
not a legal sul::ject for covers ion.
Filter Code: WSA
Conversational Action
User: N/A
System: Skips offending module and
continues processing.
Nonconversational Action
User: N/A
System: Skips module and continues
processing.
Reference Data (Also see Appendix £-12.)
Requirement determined l::y: CFBAB
Variable data supplied by: CFBAB
CFBAB525 TERMINATED:
OVERFLOWED.
THE PRV DATA SET HAS
Explanation: An overflow has occurred in the
PRV data set (PRVDS>. The maxinuIr, number of
entries is 988. Only procedures and
SUbroutines which reference each other need
use the same PRV data set. Reconversion is
suggested.
Filter Code: WSA
Conversational Action
User: N/A
Systerr,: Awai ts next cOITJl1and.
Nonconversational Action
User: PRV cleanup by library reprocessing.
System: Terminates conversion and continues
processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CFBAB
Variable data supplied by: CFBAB
CFBAB550 lWDULE SKIPPED.
MODULE name.
UNSUCCESSFUL FIND FOR
Explanation: An error code was returned from
FIND while trying to locate the module.
Filter Code: '"SA
Conversational Action
User: N/A
System: Terminates conversion for this
module and continues processing.
Nonconversational Action
User:
N/A
System: Terminates conversion for this
module and continues processing.
Reference Data (Also see Affendix B-12.)
Requirement determined by: CFBAB
Variable data supplied by: CFBAB
CFBAB575 INVALID ESD RECORD IGNORED.
FOLLOWS.
RECORD
Explanation: Only ESD types 0 through 6 are
defined. 'Ihis record contains an ESD which
is not one of these types. Message CFEAE625
following this message contains the card
image being processed.
Filter Code: WSA
Ccnversational Action
User: N/A
System: Continues processing.
Ncnconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CFEAB
Variable data supplied by: N/A
CFBAB600 MODULE SKIPPED. ERROR DETECTED WHILE
TRYING TO STOW MODULE name.
Explanation: An error return code for a
condition other than duplicate entry names
was detected on return from STOW.
It is not
fossible to stow this module into the job
library last defined.
Filter Code: WSA
Conversat.ional Action
User: N/A
system: Terminates conversion for this
module and continues frocessing.
Nonconversational Action
User:
N/A
System: Terminates conversicn for this
module and continues processing.
Refer~nce Data (Also see Appendix B-12.)
Requirement determined by: CFEAB
Variable data supplied by: CFBAB
CFEAE625 record
Explanation: This message indicates the card
image record which contains the problerr
reported in the CFBAB515 or CFEAB650 message
preceeding.
Filter Code: WSA
Ccnversational Action
User:
N/A
System: continues processing.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data {Also see Appendix E-12.}
Requirement determined by: CFEAE
Variable data supplied by: CFBAB
CFBAB650 INVALID RECORD IN MODULE name.
FOLLOWS.
PRINT
Explanation: The record printed was not cne cf
the following defined record types: ESD,
TXT, RLD, END, NAM, or VID.
Filter Code: WSA
Conversational Action
User:
N/A
System: Continues processing.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CFEAB
Variable data supplied by: CFBAB
General Messages
183
CFBAB675 PROCEEDING:MERGE DATA SET DOES NOT EXIST
OR THE DATA SET NAME IS INVALID.
Explanation: There is no entry in the catalog
for the data set name given as the MERGE
data set or the data set. name is invalid.
Filter Code: WSA
Conversational Action
User:
N/A
System: Continues fTocessing.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data CAlso see Appendix B-12.)
Requirement determine by: CFBAB
Variable data supplied by: N/A
CFBAB700 PROCEEDING:
MODULE name.
ESD RECORD MISSING FOR
Explanation: The ESD records of the
compiler-formatted object module are
sequentially numbered and it has been
detected that cne is missing. The resultant
TSS-forrratted object module may not have all
external symbols defined.
f'ilter Code: WSA
Conversational Action
User:
N/A
System: Continues processing.
Nonconversational Action
User:
N/A
Systerr,: Continues processing.
rteference Data (Also see Af~endix B-12.)
Requirement determined by: CFBAB
Variable data supplied by: CFBAB
CFBAB725 PROCEEDING: MERGE DATA SET INVALID.
MERGE DATA SET IGNORE[;.
,ExElanatio!}: The MERGE data set. is not VPAM
(VP), VSAM (VS) or VISA~ (VI> organized.
These are the only valid DSORGs for the
MERGE data set.
E'ilter Code: WSA
Conversational Action
User:
N/A
Systerr,: Conti Dues processing.
Nonconversational Action
User:
N/A
Systell': Continues processing.
peference Data (Also see Appendix B-12.)
Requirement determined by: CFBAB
Variable data supplied by: N/A
CFBAB750 INVALID RLD RECORD record IN MCDULE name.
Explanation: The card being processed has a
position pointer greater than the target
formed. This implies that the infut
compiler-formatted module is incomplete or
has been altered.
Filt.er Code: WSA
Conversational Actio~
User: N/A
System:
Ignores the remainder of the record
and continues processing.
NoncoIlversational Action
User:
N/A
System: Ignores the remainder cf the record
and continues processing.
Reference Data (Also see Appendix £-12.)
184
Requirement determined by:
Variable data supplied by:
CFEAB
CFBAB
CFBABSOO PROCEEDING: UNNAMED CONTROL SECTION IN
name IGNORED.
EXElanation: An unnamed control section is not
produced ty the PL/I compiler. This control
Section therefore did not originate from a
PL/I compilation.
Filter Code: WSA
Ccnversational Action
User:
N/A
System Ignores control section and continues
processing.
Nonconversational Action
User: N/A
System: Ignores control section and
continues processing.
Reference Data (Also see Appendix E-12.)
Requirement determined by: CFEAB
Variable data supplied by: CFBAB
CFBAB850 PROCEEDING: MODULE name HAS NO END
RECORD.
END ASSUMED.
EXFlanation: A compiler formatted object
module is normally terminated by an end
record. The end of the data set was
encountered before an end record was
detected. The LOAD data set is incorr;plete.
Filter Code: WSA
Conversational Action
User: N/A
Systerr,: Assumes end of data set and
continues processing.
Nonconversational Action
User:
N/A
System: AssUllles end of data set and
continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CFBAB
Variable data supplied by: CFEAB
CFBAB875 PROCEEDING: MCDULE narre SKIPPED.
WAS PRODUCED WITH TERMINAL ERRORS.
MODULE
Explanation: The compiler-produced VID record
indicates that the compiler found terminal
tYfe errors in the source statements.
Filter Code: WSA
converSational Action
User:
N/A
System: Skips module and continues
processing.
Nonconversational Action
User: N/A
System: Skips module and continues
processing.
Reference Data (Also see Ap~endix £-12.)
Requirement determined by: CFEAE
Variable data supplied by: CFBAB
CFBAB900 PROCEEDING: MODULE name SKIPPED.
DATA SET NOT FOUND FOR MODULE.
LCAD
Explanation: The compiler-formatted object
rrodule for this module is not recorded in
the catalog or is cataloged but does not
contain any data. The module is expected to
be cataloged, have VAM sequential (VS)
organization with a record length of 80
characters, be a generation data set of
depth 1, and be named LOAD.xxxx(O) where
xxxx is the module name.
Filter Code: WSA
Conversational Action
User: N/A
System: Skips module and continues
processing.
Nonconversational Action
User: N/A
System: Skips module and continues
processing.
Reference Data (Also see AFpendix B-12.)
Requirement determined by: CFBAB
Variable data supplied by: CFBAB
CFBAB950 DUPLICATE ENTRY POINTS FOUND IN MODULE
nan,e. RESPOND.
Explanation: The module cannot he stowed
because entry Foint names in it are
duplicates of entry point n~nes found in
other modules residing in the current
JOBLIB; or module name and PROC name are
identical.
Filter Code: XSA
Conversational Action
User: Enter one of the following responses:
QUIT - terminate processing by cleaning
up and returning to LPC.
CONTINUE - resume processing after
skipping the module in which the error
was detected.
LIST - print a list of the duplicate
names and continue.
QUITLIST - print a list of duplicate
names and then terminate [rocessing.
System: Awaits response.
Nonconversational Action
User: N/A
System: Process as LIST.
Reference Data (Also see AFpendix B-12.)
Requirement determined by: CFBAB
Variable data supplied by: CFBAB
CFBAKIOO INVALID XFERDS DATA SET NAME SPECIFIED.
REENTER DATA SET NAME
Explanation: The data set name given in the
XFERDS parameter of the PLI command has an
invalid format.
Filter Code: XSA
Conversational Action
User:
Enters valid data set name
System: Awaits response
Nonconversational Action
User: N/A
system: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CFBAK
Variable data supplied by:
N/A
CFBAK110 TERMINATED:
INVALID
XFERDS
NA~E
data set name
Explanation: The data set name given in the
XFERDS parameter of the PLI command has an
invalid format.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing
Reference Data (Also see Appendix B-12.)
Requirement determined by: CFBAK
Variable data supplied by: CFEAK
CFBAK120 TERMINATED: UNSUCCESSFUL ATTEMPT TO
CATALEF XFERDS data set name
Explanation: The data set specified in the
XFERDS parameter of the PLI command could
not be defined by the system.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing
Reference Data (Also see Appendix B-12.)
Requirement determined by: CFBAK
Variable data supplied by: CFEAK
CFBAK130 PROCEEDING: XFERDS CONTAINS INVALID
RECORDS wHICH WILL BE IGNORED
Explanation: A record has been found in the
XFERDS data set that does not have this
format:
label PLICAIL operand.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System,: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CFBAK
Variable data supplied by: N/A
CFBAK140 TERMINATED:
VOLUME FOR XFERDS
UNABLE TO MOUNT PRIVATE
Explanation: The private volume on which the
XFERDS data set resides could not be
assigned by the system.
Filter Code: WSA
CCilV€rsatiOnal Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CPEAK
Variable data supplied by: N/A
CFBAK150 INVALID PAD CHARACTER.
DEFAULT
REENTER OR
Explanation: Your PADCHAR value is invalid.
Valid pad characters are: A/Z, n, $, or @.
The default is @.
Filter Code: XSA
Conversat.ional Action
User: Enters new pad value.
System: Awaits response.
Nonconversational Action
User:
N/A
General Messages
185
Syst,em: Continues processing.
Heference Data (Also see Appendix B-12.)
Requirement determined by: CFBAK
Variable data supplied by:
N/A
Requirement determined by:
Variable data supplied by:
CFBAK210 PROCEEDING:
STOWED
CFBAK155 TERMINATED:
SPECIFIED
~.
XFERDS data set name BEING
Explanation: The XFERDS data set was not found
in your catalog, and UPBTXFER=Y was
specified.
Filter Code:
ISA
Conversational Action
User:
N/A
System: Awai t:s next corrmand.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CEBAK
Variable data supplied t;y: CFBAK
CFBAK170 TERMINATED:
UPDATE NOT REQUESTED
data set name NOT FOUND.
Explanation: The XFERDS data set was not found
in your catalog, and UPDTXFER=N was
specified.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
~onconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CFBAK
Variable data supplied by: CFBAK
CFBAK200 PROCEEDING: MODULE module name NOT
FOUND. MODULE SKIPPED
Explanation: The rrodule does not currently
exist, or the system indicates that the
module is not currently available for
processing.
Filter Code: wSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
186
MODULE module name NOT
INVALID PAD CHARACTER
Explanation: Your PADCHAR value is invalid.
Valid pad characters are: A/Z, #, $, or
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
rteference Data (Also see Appendix B-12.)
Requirement determined by: CFBAK
Variable data supplied by: N/A
CFBAK160 PROCEEDING:
CREATED
CFBAK
CFEAK
Explanation: The transformed program module
dictionary (PMD) could not be replaced in
the job library.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
system: Continues processing.
Reference Data (Also see Appendix E-12.)
Requirement determined by:
CFEAK
Variable data supplied by: CFBAK
CFBAK230 PROCEEDING:
FOUNI:
NAME reference name NOT
Explanation: One of the narres in the EXPLICIT
parameter has not been found as an external
reference.
Filter Code: WSA
Conversational Action
lJser: N/A
System: A~aits next command.
Ncnconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CFBAK
Variable data supplied by: CFBAK
CFBAK300 PROCEEDING: NODULE module nall'e CONTAINS
NO LATA. l"ODUI.E SKIPPED
Explanation: The module contains no data
(although pOinters exist for it); the module
will be ignored.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CFEAK
Variable data supplied by: CFBAK
CFBAIOI0 TERIUNA'I'ED:
joblib name
SYNAD OCCURREL FOR JOBLIE
Explanati0I!: A SYNAD error condition occurred
~hilc reading from or writing to the current
job library.
Filter Code: WSA
Conversational Action
User: N/A
SysteJr,: Av.'aits next command.
Nonconversational Action
llser:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CFBAK
Variable data supplied by:
CFEAK
CFBAK320 TERMINATED:
XFERDS data set name
SYNAD CONDITION OCCURRED FOR
Explanation: A SYNAD error condition occurred
while reading from or writing to the XFERDS
data set.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next cOll'mand.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Afpendix B-12.)
Requirement determined by: CFBAK
Variable data supplied by: CFBAK
CFBAK400 PROCEEDING:
ADDED TO XFERDS
NEW NAME aat.a set name NOT
Explanation: An XFERDS data set was giVen, but
UPDTXFER-N was specified. The XFERDS data
set has not been modified.
Filter Code:
ISA
Conversational Action
User: N/A
System: Awaits next corr~and.
Nonconversational Action
User: N/A
System: Continues frocessing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CFBAK
Variable data supplied by: CFBAK
CFBAK410 PROCEEDING: NAME module name IGNORED.
CONTAINS SPECIAL CHARACTERS
Explanation: Module names containing
characters other than 0-9, A/Z, @, #, or $
will not be converted.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next cOlT'mano.
Nonconversational Action
User: N/A
System: Continues processinq.
Reference Data (Also see Afpendix B-12.)
Requirement determined by: CFBAK
Variable data supplied by: CFBAK
CFBAK420 PROCEEDING: NAME rcodule name NOT
INSERTED. CONFLICTS WITH EXISTING ENTRY
Explanation: The specified nan.e already exists
in XFERDS as a label or an operand.
Filter Code: WSA
Conversational Action
User: N/A
Systerr.: Awaits next corrmand.
Nonconversational Action
User: N/A
System: Continues processinq.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CFBAK
Variable data supplied by: CFBAK
CFBAK430 PROCEEDING: NAME module name CONTAINS
MORE THAN 7 CHARACTERS
Explanation: Module names having more than
seven characters cannot be transformed by
the addition of the pad character. The
resulting name would be greater than 8
characters.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CFBAK
Variable data supplied by: CFBAK
CFBAK500 PROCEEDING: NAME definition na~e NOT
ClffiNGED, DEFINED AS ENTRY POINT IN ~ODULE module
name
Explanation: The module contains a DEF (entry
point) and a REF (reference) for the same
syrrbol; therefore an explicit call is not
permitted.
Filter Code: WSA
Ccnversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CFBAK
Variable data supplied by: CFBAK
CGCKEOIQ CANCELLED:
DSORG=VI
DDEF FOR SOURCE MUST HAVE
Explanation: The data definition name for the
source required to define macro definitions
for the current task must be a VISAM data
set.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CGCKB
Variable data supplied by: CGCKB
CHANNEL CONTROL UNIT x IS 1"ALFUNCTIONING
Explanation: In this message, x will identify
the failing channel controller unit.
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User: N/A
System: Startup is called to reinitialize
and restart the system.
Reference Data
Requirement determined by: CGCMA
Variable data supplied by: CGCMA
Message residence: CGCMA
Message issued by: CGCMA
Destination
Conversational: N/A
General Messages
187
Nonconversational: operator's Terminal
Transmittal technique: Own I/O routine
CBCBEI00 PROCEEDING:
Reference Data (Also see Appendix B-12)
Requirement determined by:
CHCBE
Variable data supplied by: N/A
MISALIGNED DATA ENCOUNTERED
Explanation: Data being processed is not on
the proper boundary. The error may be
caused by common and equivalence statements
or by subroutine arguments not matching the
dummy argulf!ent list.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Refe:r:ence Data (Also see Appendix B-12.)
Requirement determined by: CHCBE
Variable data supplied £y: CHCBE
CHCBE200 PROCEEDING: EXPONENT OVERFLOW AT VIRTUAL
MEMORY LOCATION location
Explanation: The result in floating-point
addition, subtraction, multiplication, or
division exceeds the maximum allowable
floating-point number (approximately 10 75 ) .
Filter Code: WSA
~o~versational Action
User:
N/A
system: Awaits next corl'Jl1and.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (l,lso see Appendix B-12)
Requirement determined by: CHCBE
Variable data supplied by: N/A
ChCBE300 PROCEEDING: EXPONENT UNDERFLOW AT
VIRTUAL MEMORY LOCATION location
J:!:xplanation: 'rhe result in floating-point
addition, subtraction, multiplication,
halving, or division is less than the
minimum allowable floating-point number
(ap;,;r'oxiroately 10- 75 ) .
Filter Code: WSA
Conversational Action
User:
N/A
System: Aw~its next corrmand.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Lata (Also see Appendix B-12)
Requirement determined by: CHCBE
Vd.riable data supplied by:
N/A
CHCBE500 PROCEEDING: FLOATING-POINT DIVIDE CHECK
AT VIRTUAL MEMORY LOCATION location
Explanation: Division of a floating-point
number by zero has been encountered.
Filter Code: WSA
Ccnversational Action
User:
N/A
System: Awaits next command.
Ncnconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-12)
Hequirement determined by: CHCBE
Variable data supplied by: N/A
CHCBZ100 TERMINATED: ARGUMENT error condition FOR
entry narr,e A'I loca tiOD
Explanation: An out-of-range parameter was
supplied to a FORTRAN math subprogram. See
FORTRAN IV Library Subprograrrs (GC28-2026).
Filter Code: WSA
Ccnversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix £-12)
Requirement determined by: CHCBZ
Variable data supplied by: CHCBZ
CHCRw010 TERMINATED: NEGATIVE DSRN ENCOUNTERED ON
reference number
Explanation: User attempted I/O with an
illegal DSRN (e.g., J=-1, WRITE (J,1».
Filter Code: WSA
Conversational Action
USEr:
N/A
System: Processing is terminated.
Nonconversational Action
User:
N/A
System: Processing is terrr.inated.
Reference Data (Also see Appendix B-28.)
Requirement determined by: CHCRW
Variable data supplied by:
CHCRW or user's
Frogram
CHCRW020 TERMINATED:
DSRN program name GREATER
THAN 99
CHCBE400 PROCEEDING: FIXED-POINT DIVIDE CHECK AT
VIRTUAL MEMORY LOCATION location
Explanation: A quotient exceeds the register
size, or the result of convert to binary
exceeds 31 bits.
Filter COdE: WSA
Conversational Action
User:
N/A
System: Awaits next cOIT.mand.
Nonconversational Action
User:
N/A
System: Continues Frccessing.
188
Explanatiol}: A DSRN greater than 99 was
encountered in the user's FORTRAN progralf'.
Filter Code:
ISA
Conversational Action
User:
N/A
System: Processing continues.
Nonccnversational Action
User:
N/A
System:
Processing continues.
Reference Data (Also see Appendix B-28.)
Hequirement determined by: CHCRw
Varia£le data supplied by:
CHCRW or user's
program
CHCRW030 PROCEEDING: INVALID param PARAMETER IN
DDEF ddname
Explanation: The DCB or DSORG parameter for
the data definition name indicated is not
valid. See FORTRAN Programmer's Guide
(C28-202S). Appendix E, for acceptable
parameters •
Filter Code: WSA
Conversational Action
User: N/A
System: ProceSSing is terminated.
Nonconversational Action
User: N/A
System: proceSSing is terminated.
Reference Data (Also see Appendix B-28.)
Requirement determined by: CHCRW
Variable data supplied by: CHCRW or user's
program
CHCRW065 PROCEEDING: AFTER REWIND-ENDFILE, UNABLE
TO CREATE EMPTY DATA SET (data set name)
Explanation: The system cannot create an empty
VAM data set from one that exists. Use
erase command.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12)
Requirement determined by: CHCRW
Variable data supplied by: N/A
CHCRW070 TERMINATED: MEMBER SPECIFIED FOR data set
name, member· name NOT FOUND
CHCRW040 PROCEEDING: ERROR FOUND IN HEXADECIMAL
INPUT ON incorrect hexidecimal number.
Explanation: Invalid hexadecimal input data.
Data not a blank. A-F, or 0-9.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User:
N/A
System: Processing continues.
Reference Data (Also see Appendix B-2B.)
Requi rement determined by: CHCRW
Variable data supplied by: CHCRW or user's
program
CHCRWOSO TERMINATED: INVALID SEQUENCE OF
OPERATIONS ON data set name
Explanation: The valid sequence of operations
is ENDFILE-REWIND-READ.See FORTRAN
Programmer's Guide (C2B-2025), Appendix E.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing is terminated.
Nonconversational Action
User: N/A
System: Processing is terminated.
Reference Data (Also see Appendix B-2B.)
Requirement determined by: CHCRW
Variable data supplied by: CHCRW or user's
program
CHCRW060 TERMINATED: INVALID SEQUENCE OF
OPERATIONS ON data set name
Explanation: The valid sequence of operations
is WRITE-ENDFILE-REWIND-READ. See FORTRAN
Programmer's Guide (C28-2025), Appendix E.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing is terminated.
Nonconversational Action
User: N/A
System: Processing is terminated.
Reference Data (Also see Appendix B-28.)
Requirement determined by: CHCRW
Variable data supplied by: CHCRW or user's
program
.f.xplanation: After opening a VP data set for
input, FORTRAN I/O was not able to find the
member specified in the DDEF command.
Filter Code: WSA
conversatIOnal Action
User:
N/A
System: processing is terminated.
Noncoversational Action
User: N/A
System: ProceSSing is terminated.
Reference Data (Also see Appendix B-28.)
Requirement determined by: CHCRW
Variable data supplied by: CHCRW or user's
program
CHCRWOBO TERMINATED: MEMBER NOT STOWED FOR data
set name, vpam data set name
Explanation: When program execution is being
terminated, whether for normal or abnormal
reasons. an attempt to stow the member name
for an output VP data set has not been
successful •
Filter Code: WSA
Conversational Action
Us er:
N/A
System: processing is terminated.
Nonconversational Action
User: N/A
System: Processing is terminated.
Reference Data (Also see Appendix B-28.)
Requirement determined by: CHCRW
Variable data supplied by: CHCRW or user's
program
CHCRW090 TERMINATED: DDNAME ddname REQUIRES
RECFM=V
Explanation: A WRITE statement which is not a
namelist WRITE or a formatted WRITE must use
a record format of V. See FORTRAN
Programmer's Guide (C28-2025), Appendix E.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing is terminated.
Nonconversational Action
User: N/A
System: Processing is terminated.
Reference Data (Also see Appendix B-28.)
Requirement determined by: CHCRW
General Messages
1B9
Variable data supplied by:
program
CHCRW or user's
System: Processing is terminated.
Reference Data (Also see Appendix B-28.)
Requirement determined by: CHCRW
Variable data supplied by: CHCRW or user's
program
CHCRW095 TERMINATED: UNABLE TO TRUNCATE DATA SET
WITH U FORMAT RECO',mS (data definition name).
Explanation: Since truncation requires a
backspace, which is illegal for U format
records, truncation cannot occur.
Filter Code: WSA
Conversational Action
User: N/l\
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Arpendix B-12)
Requirement determined by: CHCRW
Variable data supplied by: N/A
CHCRW130 TERMINATED: NON-FORMATTED READ BEYOND
RECORD IIMIT ON record name
Explanation: An attempt was IT,ade to read a
logical record that is larger than the
record length specified.
Filter Code: WSA
Conversational Action
User: N/A
System:
Processing is terminated.
Nonconversational Action
User: N/A
System: Processing is terminated.
Reference Data (Also see Appendix B-28.)
Requirement determined by: CHCRW
Variable data supplied by: CHCRW or user's
program
CHCRWI00 TERMINATED: UNRECOVERABLE I/O ERROR ON
name
Explanation: If ERR= paraJ[,eter had been
specified in the READ statement, control
would have passed to that routine without a
program interruption. See FORTRAN
Programmer's Guide 'ENT
Explanation: An alphameric field contains
either no characters, a colon, the
characters OH, or a quotation mark.
Filter Code: WSA
Conversational Action
User: N/A
Systerr.: Processing is terminated.
Nonconversational Action
User: N/A
System: Processing is terminated.
Reference Data (Also see Appendix B-28.)
Requirement determined by: CHCRW
Variable data supplied by: N/A
CHCRW250 TERMINATED: INCOMPLETE ALPHAMERIC FIELD
IN FOR~~T STATEMENT.
Explanation: End-of-Statement was encountered
before the end of the alFhameric literal.
Filter Code: WSA
CCnversational Action
User:
N/A
System: Processing is terminated.
Nonoonversational Action
User: N/A
System: Processing is terminated.
Reference Data (Also see Appendix B-28.)
General Messages
191
Requirement determined by:
Variable data supplied by:
CHCRW
N/A
CHCRW260 TERMINATED: FORMAT DELIMITER MISSING.
Explanation:
A right parenthesis, comma, or
slash is missing from the format statement.
The statement was not analyzed.
Filter Code: WSA
Conversational Action
User:
N/A
System:
Processing is terminated.
Nonconversational Action
User:
N/A
System: processing is terminated.
Reference Data (Also see Appendix B- 28.)
Requirement determined by: CHCRW
Variable data supplied by:
N/A
CHCRW300 TERMINATED: FORMAT MISSING WIDTH
SPECIFICATION
Explanation: An unsigned integer constant,
less than or equal to 255, specifying the
total field length is missing from a format
statement.
Filter Code: WSA
Conversational Action
User:
N/A
System: processing is terminated.
Nonconversational Action
User: N/A
System:
Processing is terminated.
Reference Data (Also see Appendix B-28.)
Requirement deterrnin~d by: CHCRW
Variable data supplied by: N/A
CHCRw310 TERf'INATED: FORMAT MISSING DECIMAL
SPECIFICATION
CHCRW270 TERMINATED: FORMAT SYNTACTIC ERROR (F)
Explanation:
A serious error was encount_ered
by the compiler while analyzing the format.
The statement was only compiled partially.
Filter Code: WSA
Conversational Action
User:
N/A
System: Processing is terminated.
Nonconversational Action
User:
N/A
System:
Processing is terminated.
Reference Data (Also see Appendix B-28.)
Requirement determined by:
CHCRW
Variable data supplied by: N/A
CHCRW280 TERMINATED: FORMAT LITERAL EXCEEDS 256
CHARACTERS
Explanation:
Literal data consisting of a
string of alphameric and special characters
written within a format statement must be
less than or equal to 256 characters.
Filter Code: WSA
Conversational Action
User:
N/A
System:
Processinq is terminated.
Nonconversational Action
User:
N/A
System:
Processing is terminated.
Reference Data (Also see Appendix 8-28.)
Requirement determined by:
CHCRW
Variable data supplied by: N/A
CHCRW290 TERMINATED: TOO MANY LEVELS CF
PARENTHESES IN FORMAT
Only two levels of parentheses,
in addition to r-arentheses required by the
format statement, are perrr;itted in a format
stat:ernent.
Filter Code: "SA
Conversational Action
User:
N/A
System: Processing is terrr.inated.
Nonconversat.ional Action
User:
lei/A
-------Syste~:
Processing is terminated.
Reference Data (Also see Appendix E-28.)
Requirement determined by:
CHCRW
Variable data supplied by: N/A
Explanation: An unsigned integer constant
specifying the number of decimal places to
the right of the decimal point (i.e.,
fractional portion) is missing from a format
statement.
Filter Code: WSA
Ccnversational Action
User:
N/A
System: Processing is terlninated.
Nonconversational Action
User: N/A
System:
Processing is terminated.
Reference Data (Also 'see Appendix B-28.)
Requirement determined by: CHCRW
Variable data supplied by: N/l\
CHCRW320 TERMINATED:
ERROR
DECIMAL POSITION FORMAT
The total number of places to the
right of the decimal point (fractional
portion) specified in a format is invalid
for the data type.
Filter Code: WSA
~cnversational Action
User:
N/A
System: Processing is terminated.
Nonconversational Action
User: N/A
System:
Processing is terminated.
Reference Data (Also see Appendix B-28.)
Requirement determined by: CHCRW
Variable data supplied by:
N/A
~lanaticn:
CHCRW330 TERJll.INATED: INITIAL FOID1AT CHARACTER
INVALID
~lanation:
192
Explanation: The first character encountered
while analyzing a format staterrent was net a
left parenthesis.
Filter Code: WSA
Conversational Action
User: N/A
System:
Processinq is terminated.
NonCOIlversational Action
User: N/A
System:
Processing is terminated.
Refe~ence Dat~ (Also see Appendix B-28.)
Requirement determined by: CHCRW
Variable data supplied by:
N/A
CHCRW340 TERMINATED: EXTRANEOUS CHARACTERS AFTER
END OF STATEMENT
Explanation: Extraneous characters appear in a
format statement after the level zero right
parenthesis.
Filter Code: WSA
Conversational Action
User:
N/A
System: Processing is terminated.
Nonconversational Action
User:
N/A
System: processing is terminated.
Reference Data (Also see Appendix B-28.)
Requirement determined by: CHCRW
Variable data supplied by:
N/A
CHCRW350 PROCEEDING: INVALID INPU'!'
FIELD •••• statement •••• characters
Explanation: In Frocessing real input data,
invalid characters were encountered.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User:
N/A
System: processing continues.
Reference Data (Also see ApFendix B-28.)
Requirement determined by: CHCRW
Variable data supplied by: CHCRW or user's
program
ignore the remainder of the data record
(treat as all zeros), T to terminate the
program, or reenter the correct data from
the error to the end of the data record.
Filter Code: WSA
Ccnversational Action
User: Enters value.
System: Awaits response.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-28.)
Requirement determined by: CHCRW
Variable data supplied by: N/A
CHCRW360 PROCEEDING: EXPONENT TOO
LARGE •••• statement ••.• exponent
Explanation: The exponent for an input real
nurrber is greater than +75 or srr,aller than
-78.
Filter Code: WSA
Conversational Action
User: N/A
System:
Processing continues.
Ncnconversational Action
User:
N/A
system: Processing continues.
Reference Data (Also see Appendix B-28.)
Requirement determined by: CHCRW
Variable data supplied by: CHCRW or user's
program
CHCRW351 TERMINATED: INVALID INPUT'
FIELD .••• statement ••.• characters
Explanation: In processing real input data,
invalid characters were encountered.
Filter Code: WSA
Conversational Action
User:
N/A
System: ProceSSing is terminated.
Nonconversational Action
User:
N/A
System: ProceSSing is terminated.
Reference Data (Also see Appendix B-28.)
Requirement determined by: CBCRW
Variable data supplied by: CHCRW or user's
Frog ran:
CHCRW355 RE-ENTER DATA LINE FROM ERROR TO END
Explanation: While rrocessing real input,
invalid characters were encountered.
Filter Code: WSA
Conversational Action
User:
N/A
System: Processing continu~s.
Nonconversational Action
User:
N/A
System: Processing continues.
Reference Data (Also see Appendix B-28.)
Requirement determined by: CHCRW
Variable data supplied by: N/A
CHCRW356 ENTER: R(REVIEW), I(IGNORE),
TCTERMINATE), OR THE DATA FROM ERROR TO END
Explanation: There is an error in real data.
Enter R to review the data record, I to
CHCRW370 PROCEEDING: INTEGER TOO LARGE
FOR •.• statement ••• integer
Explanation: The magnitude of an integer was
too large; it exceeded 217483647 for an item
of four-byte length, or 65535 for an item cf
two- byte length.
Filter Code: WSA
Ccnversational Action
User:
N/A
System: Processing continues.
Nonconversational Action
User:
N/A
System: ProceSSing continues.
Reference Data (Also see Appendix B-28.)
Requirement determined by: CHCRW
Variable data supplied by: CHCRW or user's
program
CHCRW380 PROCEEDING: INTEGER OU'!'PU'I FIELD TOO
SMALL FOR ••.• statement ••• integer
Explanaticn: The output field width specified
in a forrr,at statement is too srrall for
actual data.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data (Also see Appendix B-28.)
Requirement determined by: CHCRW
Variable data supplied by: CHCRW or user's
program
General Messages
193
CHCRW390 PROCEEDING: INVALID HEXADECIMAL
INPUT •••• statement ••• number
Explanation: The hexadecimal infut data was
not 0-9 or A-F'.
Filter Code: ~SA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data (Also see Appendix B-28.)
Requirement determined by: CHCRW
Variable data supplied by: CHCRW or user's
program
CHCRW400 TERMINATED: STOP number
Explanation: The STOP routine was called by
the user progralr. Variable information is
to be supplied by the user source statement.
Filter Code: WSA
Conversational Action
User: Supplies variable information.
System: Processing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data (Also see Appendix B-28.)
Requirement determined by: CHCRW
Variable data supplied by: CHCRW or user's
prog,ram
CHCRW410 PROCEEDING: PAUSE number
Explanation: A PAUSE statement was met in a
FORTRAN program. The variable portion is
supr1ied by user program. The program will
proceed if a RUN command is issued.
Filter Code: VISA
Conversational Action
User: Supplies variable information.
System: Processing continues.
Nonccnversational Action
User: N/A
System: P,rocessing continues.
Reference Qata (Also see Appendix B-28.)
Requirement determined by: CHCRW
Variable data supplied by: CHCRW or user's
program
CHCRtl1l20 TERMINATED: EXIT IN USER
PROGRAl~
EXElanation: A CALL EXIT was encountered in a
user FORTRAN program.
Filter Code: WSA
Conversational Action
User: N/J\
System, Program execution terminated.
Nonconversational Action
User: N/A
System: Program execution terminated.
Reference Data (Also see Appendix B-28.)
Requirement determined by: CHCRW
Variable data supplied by: N/A
CHCRWli25 TERMINATED: SUBPROGRAM ERROR ENTRY
Ex"lanation: Exit requested by error in user
sUbprogran.
194
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-28)
Requirement determined by: CHCRW
Variable data supplied by: N/A
CHCRW430 PROCEEDING: FIRST NAMELIST CHARACTER NOT
BLANK •.•• character
Explanation: The first character of a namelist
input record must be blank. See IBM FORTRAN
IV (C28-2007).
Filter Code: WSA
Ccnversational Action
User:
N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: processing continues.
Reference Data (Also see Appendix B-28.)
Requirement determined by: CHCRW
Variable data supplied by: CHCRW or user's
program
CHCRW431 TERMINATED: FIRST
(character)
NAMELIS~
CHARACTER NOT
BLANK
Explanaticn: First character of namelist input
record must be blank.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
system: Continues processing.
Reference Data (Also see Appendix B-28)
Requirement determined by: CHCRw
Variable data supplied by: CHCRW
PROCEEDING: NAMELIST VARIABLE NAME
MISSING (statement FOR ddnamel
CHCR~440
Explanation: The general form of the input
narrelist record does not agree with the
standard (variable naIf'e=data iteJr,s).
Filter Code: WSA
Conversational Action
User:
N/A
System: Processing continues.
Nonconversational Action
User:
N/A
System: Processing continues.
Reftrence Data (Also see Appendix B-28.)
Requirement determined by: CHCRW
Variable data supplied by: CHCRW or user's
program
CHCRWtl41 TERMINATED: NAMELIST VARIABLE
(statement FOR ddnamel
NAl'I-E
~ISSING
Explanation: The general form of input
namelist record does not agree with the
standard (variable name=data items).
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-28)
Requirement determined by: CHCRW
Variable data supplied by: CHCRW
CHCRW450 PROCEEDING: NAMELIST VARIABLE NAME TOO
LONG (name FOR ddname)
Explanation: The nan;elist variable name
exceeds six characters in length.
Filter Code: WSA
Conversational Action
User: N/A
System: processing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data (Also see Appendix B-28.)
Requirement determined by: CHCRW
Variable data supplied by: CBCRW or user's
prograrr
CHCRW451 TERMINATED: NAMELIST VARIABLE NAME TOO
LONG (name FOR ddname)
Explanation: Namelist variable name exceeds
six characters in length.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next corr~anQ.
Nonconversational Action
User: N/A
Systen;: continues processing.
Reference Data (Also see Appendix B-28)
Requirement determined by:
CHCRW
Variable data supplied by: CHCRW
CHCRW460 PROCEEDING: NAMELIST VARIABLE NAME
INVALID (name FOR ddname)
Explanation: The variable name was not
selected from among those defined in the
namelist statement in the source program.
Filter-Code: WSA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data (Also see Appendix B-28.)
Requirement determined by: CBCRW
Variable data supplied by: CHCRW or user's
prograrr
CHCRW461 TERMINATED: NAMELIST VARIABLE NAME
INVALID (nanle FOR ddname)
EXFlanation: Variable name net selected from
among those defined in narrelist statement in
source program.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next commaLd.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-28)
Requirement determined by: CHCRW
Variable data supplied by: CHCRW
CHCRW470 TERl':INATED: NAMELIST TABLE IN ERROR
FOR •••• name
Explanation: possible errors in the
conpiler-generated table are:
1. First entry is not for the namelist
identifier
2. Nc ty~e entry after a variable name entry
3. No array size entry after an array name
entry
Filter Code: WSA
Conversational Action
User: N/A
System: Processing is terminated.
Nonconversational Action
User: N/A
System: Processing is terIl!inated.
Reference Data (Also see Appendix B-28.)
Requirement determined by: CHCRW
Variable data supplied by: CHCRW or user's
program.
CHCRW480 PROCEEDING:
FOR ddnalT,e)
NAMELIST SUBSCRIPTED (name
Explanation: A subscript is incorrectly
appended to a variable name that defines a
simple variable, not an array.
Filter Code: WSA
Conversational Action
User: N/A
System: processing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data (Also see Appendix B-28.)
Requirement determined by: CHCRW
Variable data supplied by: CHCRW or user's
program
CHCRW481 TERMINATED: NAMELIST SIMPLE NAME IS
SUBSCRIPTED (name FOR ddname)
Explanation: Subscript incorrectly appended to
variable name that defines sirr~le variable,
not an array.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Ncnconversational Action
User: N/A
System: Continues processing.
Reference Lata (Also see Appendix B-28)
Requirement determined by: CHCRW
Variable data SUpplied by: CHCRW
CHCRW490 PROCEEDING: NAMELIST ARRAY HAS TOO
SUBSCRIPTS (nawe FOR ddname)
~ANY
Explanation: The number of subscripts appended
to an array name is in excess of the number
of dimensicns.
Exarr.ple:
General Messages
195
A!3,4,5.6)=25.0 where A has a dimension of
11,8,9).
Filter Code:
WSA
:fonyersatfOnal Ac~ion
User:
N/A
.system~
Processing continues ..
Nonconv€;;:-sati0D£l.l Ac!.ion
User:
N/A
Syst_em:
Processing continues.
Reference Data (Also see Appendix B-28.)
Requirement determined by:
CHCRW
Var.iable data suppli ed by:
CHCRW or user' s
program
CHCRW491 'rERMINA'IED: NAMELIST ARRAY HAS TOO MANY
SUBSCRIPTS (name FOR ddnarne)
CHCRW510 PROCEEDING: NAMELIST ARRAY HAS
INSUFFICIENT SUBSCRIPTS (subscript FOR ddname)
Explanation: The number of subscripts appended
to array name is less than the number of
dimensions.
Example:
1\(1,2,3) where A has a dimension of
(7,8,9,10).
Filtex- Code: WSA
Conversational Action
User:
N/A
System:
Processing continues.
Nonconversational Action
User:
N/A
S-,'sterr:
Processing COr.t-lilU€S.
Reference Data (Also see Appendix B-28.)
Requirement determined by: CHCRW
Variable data supplied by:
N/A
]::~£l
Explanation: The input namelist record does
not contain a data item following an equal
sign or does not have an equal sign
following a variable name.
Filter Code: WSA
Conversational Action
User:
N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data (Also see Appendix B-28.)
Requirement determined by: CHCR~
Variable data supplied by: CHCRW or user's
program
CHCRWS61 TERMINATED: NO DATA ITEM FOR NAMELIST
(name list FOR ddname)
Explanation: Input namelist record does not
contain data item following equal sign, or
does net have equal sign follo~ing variable
narre.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
General Messages
191
User: N/A
Systen:: Conti nues process ing.
Reference Data (Also see Appendix B-28)
Requirement determined by: CHCRW
Variable data supplied by: CHCRW
Reference Data (Also see Appendix B-11.>
Requirement determined by: FINDDS Macro
Variable data supplied by:
FINDDS Macro
***CHD001 DCB OPERAND REQ'D -- NOT SPECIFIED.
***CHD001 AREA OPERAND REQ'D -- NOT SPECIFIED.
1. Explanation:
The area, or second operand, is
null in the standard form of the macro
instruction. The macro expansion is
terminated.
Conversational Action
User:
N/A
System: continues.
Nonconversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: FINDDS Macro
Variable data supplied by: FINDDS Macro
2. Explanation:
The AREA operand is missing.
Macro expansion continues.
Conversational Action
User:
N/A
System: continues.
Nonconversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by:
FREEMAIN Macro
Variable data supplied ty:
FREEMAIN Macro
3. Explanation:
The rlength is specified in the
standard form of the macro instruction and
rarea is not.
Macro expansion is
terminated.
Conversational Action
User:
N/A
System: continues.
Nonconversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined ty: MSGWR Macro
Variable data supplied by: MSGWR Macro
4.
Explanation:
The AREA ot:'erand is Inissing.
No
further macro expansion occurs.
Conversational Action
User:
N/A
System: Continues.
Nonconversational Action
User:
N/A
System:
Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined ty:
RESUME, STORE,
or STO.I Macro
Variable data supplied by: RESUME, STORE,
or STOW Macro
***CHD001 CODE OPERAND REQ'D -- NOT SPECIFIED.
Explanation:
The code operand is null in the
standard form of the macro instruction. The
macro expansion is terminated.
Conversational Action
User:
N/A
Syst6U:
Continues.
Nonccnversational Action
User:
N/A
System:
continues.
198
1. Explanation: The DeB operand is missing.
No
further macro expansion occurs.
Ccnversational Action
User: N/A
System:
continues.
Nonconversational Action
User: N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: BSP, CLOSE,
CNTRL, DElREC, ESETL, FEOV, FIND,
FREEBUF, FREEPOOL, GET, GETBUF, GETPOOl,
NOTE, OPEN, POINT, PRTOV, PUT, PUTX,
RELEX, REISE, STOW, or TRUNC Macro
Variable data supplied by: ESP, CLOSE,
CNTRL, DEIREC, ESETL, FEOV, FINL,
FREEBUF, FREEPOOL, GET, GETBUF, GETPOOL,
NOTE, OPEN, POINT, PRTOV. PUT, PUTX,
RELEX, REISE, STOW, or TRUNC Macro
2. Explanation: The DCB operand is missing.
No
further macro expansion occurs. Register 1
is not disturbed.
Ccnvprsational Action
User:
N/A
System:
Continues.
Ncnccnversaticnal Action
User: N/A
System:
Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: SETL Macro
Variable data supplied by: SETL Macro
***CHD001 DECB OPERAND REQ'D -- NOT SPECIFIED.
Explanation:
The DECB operand is missing.
Nc
further uacro expansion occurs.
Conversational Action
User: N/A
System:
Continues.
Nonconversational Action
User: N/A
System:
ContinUes.
Reference Data (Also see Appendix B-11.)
Requirement determined by: CHECK, READ, or
WRITE ~acro
Variable data supplied by: CHECK, READ, or
WRITE Macro
***CHD001 EP OR EPLOC OPERAND REQ'D -- NOT
SPECIFIED.
1. Explanation: The EP or EPLOC OPERAND IS
MISSING.
No further macro expansion occurs.
Conversational Action
User: N/A
System:
Ccntinues.
Nonconversational Action
User: N/A
System:
Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by:
DELETE Macro
Variable data supplied by:
LELETE Macro
2. Explanation: '['he EP or EPLOC operand is
missing. Macro expansion continues.
Conversational Action
User: N/A
System: Continues.
Nonconversational Action
User: N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by:
FHEEMAIN Macro
Variable data supplied by: FREEMAIN Macro
***CHDOOl FIFTH OPERAND REQ'D -- NOT SPECIFIED.
L
£,xplanation: the fifth operand is missing.
Macro expansion continues.
Conversational Action
User: N/A
System: Conti nues.
Nonconversational Action
User: N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: CSTORE or SYSBR
Macro
Variable data supplied by: CSTORE or SYSER
Macro
2. Explanation: The fifth operand is null in the
standard or L-form of the macro instruction
and a zero Adcon is generated. Macro
expansion continues.
Conversational Action
User: N/A
System: continues.
Nonconversational Action
User: N/A
System: continues.
Reference Data (Also see A~peLdix £-11.)
Requirement determined by: VSENDR Macro
Variable data supplied by: VSENDR I'lacro
FINDJFCB, GATRD, GATWR. GTWAR, or GTWSR
Macro
3. Explanation: The first operand is missing. A
NOP is generated instead of the BO
instruction; and macro expansion continues.
Conversational Action
User: N/A
System: Continues.
Ncnconversational Action
User: N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: ATPOL Macro
Variable data supplied by: ATPOL Macro
4. Explanation:
The icb sublist is missing.
Macro expansion continues.
Ccnversational Action
User: N/A
System: Continues.
Nonconversational Action
User: N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: DIR Macro
Variable data supplied by: DIR Macro
5. Explanation: The first operand is null, and
its value is considered to be zero. Macro
expansion continues.
Conversational Action
User: N/A
System: Ccntinues.
Nonconversational Action
User: N/A
System: Ccntinues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: ERROR Macro
Variable data supplied by: ERROR Macro
6. Explanaticn:
***CHD001 FIRST OPERAND REQ'D -- NOT SPECIFIED.
1. Explanation:
The first operand is null in the
macro instruction. Macro Expansion
continues.
Conversational Action
User: N/A
System: Continues.
Nonconversational Action
User.: i~/A
System: Continues.
Reference Data (Alsc see A~pendix £-11.)
Requirement determined by: ABEND, ARM,
CALL, CSTORE, LIBESRCB, SIR, SYSER, or
TTIMER t-,acrc
Variable data supplied by: ABEND, ARM,
CALL, CSTORE, LIBESRCH, SIR, SYSER, or
'ITHlEi< Nacro
2. Explanation:
The first operand is null in the
standard fcrm of the macro instruction.
Macro eXl,lansion is terrr,inated.
Conversational Action
User: N/A
System: continues.
~onconversational Action
User: N/A
System: continues.
Reference Data (Also see Appenaix B-11.)
Requirement determined .by: F1NLDS,
FINDJFCB, GAT~D, GATWR, GTW&q, or GTWSR
Macro
Variable data supplied .by: FINCDS,
The icb operand is missing. No
further macro expansion occurs.
Conversational Action
User:
N/A
System: continues.
Nonconversational Action
User: N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: INTINQ Macro
Variable data supplied by: INTINQ Macro
7. Explanation: The MSCODE operand is omitted in
the standard form.
Macro expansion is
terminated.
Ccnversational Action
User: N/A
System: Ccntinues.
Nonconversational Action
User: N/A
System: Ccntinues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: MSGWR Nacre
Variatle data supplied by: MSGWH Macro
8. Explanation:
The first operand is null.
Register 0 is cleared, and macro expansion
ccntinues.
Conversational Action
User:
N/A
System: Continues.
Nonconversational Action
User: N/A
System: Continues.
General Messages
199
Reference Data (Also see Appendix B-11.)
Requirement determined by: PURGE Macro
Variable data supplied .ty: PURGE Macro
The first. or t.r, operand is
null, &CllAR is set to R, and &FUNCT is set
to S.
Macro expansion continues.
Conversational Action
User:
N/A
System: Continues.
Nonconversational Action
User:
N/A
System: Continues.
Heference Data (Also see Appendix B-11.)
Requirement determined by: STIMER Macro
Variable data supplied by: STIMER Macro
9. Explanation:
10. Explanation: The first operand is null in the
st.andard or L-£orm of the macro instruction
and a constant of one blank is generated.
Macro expansion continues.
Conversational Action
User: N/A
System: continues.
Nonconversational Action
User: N/A
Systelt: continues.
Reference Data (Also see Appendix E-11.)
Requirement determined by: VSENDR Macro
Variable data sUfplied by: VSENDR Macro
Requirement determined by:
Variable data supplied by:
ERROR Macro
ERROR Macro
4 •.Explanation: Because the third oferand is ST
and the fourth operand is null, zero has
been OR'd into register 1. Macro expansion
continues.
Conversational Action
User:
N/A
System: Continues.
Nonconversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: PURGE Macro
Variable data supplied by: PURGE Macro
5. Explanation:
The fourth operand is null in the
standard or I-form of the macro instruction
and a zero adcon is generated. Macro
eXj:ansion continues.
Conversational Action
User:
N/A
System: Continues.
Nonconversational Action
User: N/A
System: Continues.
~eference Data (Also seE Appendix B-11.)
Requirement determined by:
VSENDR Macro
Variable data supplied by: VSENDR Macro
"'**CHD001 }'OURTH OPERAND REQ'D -- Nctr SPECIFIED.
1. Explanation:
1'he fourth ore rand is missing
from the macr'o instruct. ion • Macro expansion
continues.
Conversational Action
User:
N/JI
System: Continues.
Nonccnversational Action
User:
N/A
System:
Conti.nues
***CHD001 I,ENGTH OPERAND REQ'D -- NOT SPECIFIED.
1.
Explanation: The LENGTH operand is missing.
No macro expansion occurs.
Conversational Action
User:
N/A
System: Continues.
Nonconversational Action
User: N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Hequirement determined by: GETPOOL Macro
Variable data supplied by: GETPOOL Macro
2.
Explanation: The rarea is specified in the
standard form of the macro instruction and
rlength is not. Macro expansicn is
terrr,inated.
Conversational Action
User:
N/A
Sfsten: continues.
Nonconversational Action
User:
N/A
System: continues.
Reference Data (Also see Arpendix B-11.)
Requirement determined by: MSGWR Macrc
Variable data supplied by: MSGWR Macro
~
Reference Data (Also see Appendix B-11.)
R'.:quirerrent. deterreined by: CSTORE or SYSER
Macro
Variable data supplie::l by: CSTORE or SYSER
ti;acro
2. Explanation:
The fourth orerand is null in the
standard form of the macro instruction.
Macro expansion lS terminated.
Conversational Action
User:
N/A
Systerr: CcntinUES.
~onconversational Action
User:
N/A
Systerr: continues.
Refereno" Data (Also see Appendix B-11.)
Requirement determined by: GTIoiAR or GTWSR
!1acro
Variable data supplied by: GTWAR or GTWSR
Macro
3.
200
.t:xplanation: The fourth operand is null, dnd
its value is ccnsidered to te ZEro. Macro
expansion continues.
conversational. Action
US(c'r:
N/A
Syst.em: continues.
Nonconversational Act.ion
User:
N/A
System: Continues.
Refer~!?E§.-J!at~ (Also see Afpen<:!i:x B-1l.)
3. Explanaticn: The LENGTH, or third, operand is
miSSing in the standard forrr. of the macro
instruction. Macro expansion is terminated.
Conversational Action
User: N/A
Systerr: Ccntinues.
Ncnconversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: wTOR Macro
Variable data supplied by: WTOR Macro
CHDOOl LENGTH OPERAND REQUESTED -- NOT SPECIFIED
Explanation: This message is generated when
oplist is not specified as text and the L
operand is omitted.
Conversational Action
User:
N/A
System: continues.
Nonconversational Action
User:
N/A
System: continues.
Reference Data (Also see AIoCIoCendix B-11.)
Requirement determined by:
EBCDTIME Macro
Variable data supplied ty:
EBCCTIME Macro
3. Explanation: The message, or first, operand is
missing in the macro instruction for
standard or L-form. Macro expansion is
terminated.
Conversational Action
User:
N/A
System: Continues.
Nonconversational Action
User: N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: WTOR Macro
Variable data supplied by: WTOR Macro
***CHDOOl MODE OPERAND REQ'D -- NOT SPECIFIEC.
***CHD001 LOW.
SPECIFIED.
LIM.
OPERAND REQ'D -- NOT
1. Explanation: The llimit operand is missing.
No further rr,acro expansion occurs.
Conversational Action
User:
N/A
System: ccntinues.
Nonconversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by:
CELREC Macro
Variable data sUPFlied ty:
DELREC Macro
Explanation: The mode operand is rr,issing.
Macro expansion continues.
Conversat.ional Action
User: N/A
Systerr,:
Continues.
Ncnconversational Action
User: N/A
System:
Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: FREE~AIN or
GET!':AIN Macro
Variable data supplied by: FREEt/lAIN or
GET!o'AIN Macro
***CHDOOI NA!o'E OF DCB REQ'C -- NOT SPECIFIED.
2. Explanation: The llimit oIoCerano is missing and
the type operand specifies ii: or R.
Macro
expansion continues.
Conversational Action
User:
N/A
System: Continues.
Nonconversational Action
User:
N/A
System: continues.
Reference Data (Also see AIoCpendix B-11.)
Requirement determined ty:
SETL Macro
Variable data supplied J:y: SETL Macro
Explanation: The required symbol is not in the
narr,e field of the Il'acro instruction. After
MNOTE rracro expansion continues.
Ccnversational Action
User: N/A
System: Continues.
Nonconversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: DCB Macro
Variable data supplied by:
CCE Macro
***CHD001 MESSAGE OPERAND REQ'D --. NOT SPECIFIED.
***CHDOOl NA!o'E OF I FORM REQ'D -- NOT SPECIFIED.
1. Explanation: The message operand is missing in
the standard or L-form of the macro
instruction.
Macro expansion is terminated.
Conversational Action
User: N/A
System: continues.
Nonconversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined ty:
WTL Macro
Variable data sup[lied by: WTL Macro
2. Explanation: The message operand is null in
the standard or E-form of the macro
instruction.
Macro expansion is terminated.
Conversational Action
User: N//\
System: Continues.
Nonconversational Action
User:
N/A
System: continues.
Reference Data (Also see Appendix B-11.)
Requirement determined Dy: WTO Macro
Variable data su[[lied by: WTO Macro
1. Explanation: The required symbol in the narre
field of the macro instruction is rrissing
and the MF operand indicates I-form.
Macro
expansion continues.
Ccnversational Action
User:
N/A
System: continues.
Nonconversational Action
User: N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: CALL, CSTORE,
DIRt or LIBES:lSYSECT is null.
!-:acro
expansion continues.
Conversational Action
User:
N/A
System:
continues.
Nonconversational Action
User:
N/A
System:
Continues.
Reference Data (Also see Appendix B-l1.)
Requirement. deterrdned ty:
ADCON Macro
Variatle data supplied by: ADCON Macro
2. Explanation:
If the type attribute of the EE
operand is not T, and both l>SYSPSCT and
&SYSECT are null, a zero Adcon is generated
for trje entry Foint R-value in the L-form;
202
***CHD001 SECOND OPERAND REQ'D -- NOT SPECIFIED
L
Explanation: The second operand is rr.issing
frcIT' the macro instruction. Macro expansion
ccntinues ..
90nversational Action
User:
N/A
Systerr:
Continues.
Nonoonversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix B-ll.)
Requirement determined b 1 :
ARM, CSTORE, or
SYSEH Macro
Variable data supplied by:
ARM, CSTORE, er
SYSER I,lacro
2. Explanation: The second operand is missing in
the standard form of the macro instruotion.
Macro expansion is terminated.
Conversational Action
User:
N/A
Systerr,: Continues.
Nonconversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix E-1l.)
.Requirement determined by:
FINDJFCB, GATRI:,
GATWR, GTWAR, or GTWSR Macrc
Variable data supplied by: FINDJFCB, GATRD,
GATWR, GTWAR, or GTWSR Macro
3. Explanation: The second operand is missing
fromm the macro instruction. No further
macro expansion occurs.
Conversational Action
User: N/A
System: Continues.
Nonconversational Action
User: N/A
System: continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: CNTRL, GETPOOL,
LIBESRCH. POINT, PRTOV, or STORE Macro
Variable data supplied by: CNTRL, GETPOOL,
LIBESRCH, POINT, PRTOV, or STORE Macro
4. Explanation: The second operand is null in the
standard or L-form of the macro instruction
and a zero Adcon is generated. Macro
expansion continues.
Conversational Action
User: N/A
System: continues.
Nonconversational Action
User: N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: VSENDR Macro
Variable data supplied by: VSENDR Macro
5. Explanation: Because the first operand is SR
or SS and the second operand is null, zero
is OR'd into register O. Macro expansion
continues.
Conversational Action
User: N/A
System: continues.
Nonconversational Action
User: N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: PURGE Macro
Variable data supplied by: PURGE Macro
6. Explanation: The second operand is null, and
its value is considered to t~ zero. Macro
expansion continues.
Conversational Action
User: N/A
System: Continues.
Nonconversational Action
User: N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: ERROR Macro
Variable data supplied by:
ERROR Macro
7. Explanation: The second operand in the macro
instruction is nulL No fu.rther processing
of the second not disturbed. The macro
expansion continues.
Conversational Action
User: N/A
System: Continues.
Nonconversational Action
User: N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: ABEND Macro
Variable data supplied by: ABEND Macro
8. Explanation: The second operand is null and
the first operand is specified. The two
low-order bytes of register 1 are set to
zero. The macro expansion continues.
Conversational Action
User: N/A
System: continues.
Nonconversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: CNSEG Macro
Variable data supplied by: CNSEG Macro
9. Explanation: The reply, or second, operand is
missing in the operand field of the macro
instruction for standard form. Macro
expansion is terminated.
Conversational Action
User:
N/A
System: Continues.
Nonconversational Action
User: N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: WTOR Macro
Variable data supplied by: WTOR Macro
***CHD001 SIXTH OPERAND REQ'O -- NOT SPECIFIED.
Explanation: The sixth operand is missing.
Macro expansion continues.
Conversational Action
User:
N/A
System: Continues.
Nonconversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: SYSER Macro
Variable data supplied by: SYSER Macro
***CHDOOl THIRD OPERAND REQ'D -- NOT SPECIFIED.
1. Explanation: The third operand is missing from
the macro instruction. Macro expansion
continues.
Conversational Action
User: N/A
System: Continues.
Nonconversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: CSTORE or SYSER
Macro
Variable data supplied by: CSTORE or SYSER
Macro
2. Explanation: The third operand is missing in
the standard form of the macro instruction.
Macro expansion is terminated.
Conversational Action
User: N/A
System: continues.
Nonconversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: FINDJFCB, GTWAR.
or GTWSR Macro
Variable data supplied by: FINDJFCB, GTWAR,
or GTWSR Macro
General Messages
203
3. Explanation: The third operand is null in the
standard or L-form of the macro instruction
and a zero adcon is generated. Macro
expansion continues.
Conversational Action
User: N/A
System: continues.
Nonconversational Action
User: N/A
System:
continues.
Reference Data (Also see AFpendix B-11.)
Requirement determined by:
VSENDR Macro
Variable data supplied by: VSENDR Macro
4.
~lanation:
The third operand is null in the
macro instruction and the word containing
the value of tCTR1 is made to contain zero.
Macro expansion continUES.
Conversational Action
User:
N/A
Syste~:
continues.
Nonconversat.ional Action
User:
N/A
System: continues.
Reference Data (Also see Arpendix B-11.)
Requirement determined by: SPATH Macro
Variable data sUPFlied ty:
SPATH Macro
5. Explanation: The third operand is null, and
its value is considered to 1;e zero. Macro
expansion continues.
Conversational Action
User:
N/A
System: Continues.
Nonconversational Action
User:
N/A
SystelL: continues.
Reference Data (Also see Appendix B-1!.)
Requirement determined by: ERROR Macro
Varianle oata sUfrlied by:
ERRGR Macro
***CHDOOI TYPE OPERAND REQ'C -- Nor SPECIFIED.
Explanation:
The type operand is missing.
No
further macro expansion occurs.
Conversational Action
User:
N/A
System: continues.
NOllconversational Action
User:
N/A
Sys·terr.:
Ccntinues ..
Reference Data (Also see Appendix B-11.)
R8quirement determined 1::y: ADCGN, INTINQ,
HEAD, SETL, STOW, cr WF" or OOY is
sr;ecified.
Hacro expansion continues.
x is
t.he invalid operand.
Conversational Action
User:
N/A
System: continues.
Nonconversatio!!?l Action
User:
['VA
Systerr: continues.
Reference Data (Also see Appendix B-l1.)
ReqUirement. determined by:
STEC ]liacro
Variable data sUH~lied by: STEC l'iacro
204
***CHD002 INVALID AREA OPERAND SPECIFIED -- x
Explanation: The code S is invalid when used
with an access method other than TAM. No
~acro expansion occurs.
x is the invalid
area operand.
Ccnversational Action
User: N/A
System: continues.
Ncnconversational Action
User: N/A
System:
continues.
Reference Data (Also see Appendix B-l1.)
Requirement determined by: READ or WRITE
l':acro
Variable data supplied by: READ or WRITE
Macro
***CHD002 INVALID DELOPT OPERAND SPECIFIED -- x
x is the invalid operand. The
only valid codes for DELOPT are null, SMO,
and SDJII.
~acro expansion continues.
ConvErsational Action
User: N/A
System:
Continues.
Ncnconversational Action
User: N/A
System:
continues.
Reference Data (Also see ApFendix E-l1.)
Requirement determined by: ADCON Macro
Variable data supplied by: ADCON Macre
~l~ation:
***CHD002 INVALID DWB OPERAND SPECIFIED -- trwE -tDWBC -- &DWBS
Explanation:
The DWB operand is specified as
an invalid value, and the value is
considered to be zero.
Macre expansion
continues.
Conversational .~ction
User: N/A
System: Continues.
Nonconversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix B-ll.)
Requirement determined by: SYSER Maere
Varial::le data supplied by:
SYSER Macro
***CBD002 INVALID EP OR EPLOC OPERAND SPECIFIED -x.
Explanation:
The EP or EPLCC operand, X, is
not a valid symbol. Two Adcons of zero are
g~nerated in the L-form. nothing is
generated :in thE, E-form, and macro eXfansicn
continues.
Conversational Action
User: N/A
Syste~:
Continues.
Ncnoonversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix B-1!.)
Requirement determined by:
SAEC, SEEC,
SPEC, SSEC, or STEC Macro
Variable data supplied by,
SAEC, SEEC,
SPEC, SSEC, or STEC Macrc
***CHD002 INVALID EXTRA OPERAND SPECIFIED -- X
Explanation: More than one of the mutually
exclusive operands, x, is specified, where x
is either DINTVL, BINTVI, TOO, DOW, DOM, or
DOY; &INSW is set to zero and a zero adcon
is generated for the interval address.
Macro expansion continues.
Conversational Action
User: N/A
System: Continues.
Nonconversational Action
User: N/l\
System: Continues.
Reference Data (Also see Aj:pendix B-11.)
Requirement determined by: STIMER Macro
Variable data supplied by: S'rIMER Macro
***CHD002 INVALID FIFTH OPERAND SPECIFIED -- x
1. Explanation: The fifth operand is an invalid
value, and its value is considered to be
zero. Macro eXj:ansion continues. x is the
invalid operand.
Conversational Action
User: N/A
System: Continues.
Nonconversational Action
User:
N/A
system: Continues.
Reference Data (Also see Appendix E-11.)
Requirement determined cy:
ERRCR or SYSER
Macro
Varial:le data supplied by:
ERROR or SYSER
Macro
2. Explanation: x is the invalid operand. The
ATR operand is greater than 255. The val ue
is taken modulo 256, and macro expansion
continues.
Conversational Action
User: N/A
System: Continues.
Nonconversational Action
User:
N/A
Systell: continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: CSTORE Macro
Variable data supplied by: CSTCRE Macro
***CHD002 INVALID FIRST OPERAND SPECIFIED -- x.
1. Explanatlon: If, in the L-forIf macro
instruction, the operand, x, is not "texti t is invalid. Macro expansion is
terminated.
Conversational Action
User:
N/A
System: continues.
Nonconversational Action
User: N/A
System: Continues.
Reference Data (Also see Appenaix B-11.)
Requirement determined by: CAT, CDD, CDS,
DDEF, DEL, PR, PU, REL, or W'I Macro
Variable data supplied by:
CAT, CDD, CDS,
DDEF, DEL, PR, PU, REL, or W'I Macro
2. Exr;lanation: The first operand, X, is not a
valid code. Therefore, zero is loaded into
register 15. Macro expansion continues.
Conversational Action
User:
N/A
system: continues.
Ncnconversational Action
User: N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: SETSYS, SETUP,
SETXTS, XTRCT, XTRSYS, or XTRXTS Macro
Variable data supplied by:
SE'ISYS, SETUP,
SETXTS, XTRCT, XTRSYS, or XTRXTS Macro
u*CHD002 INVALID FIRST OPERAND SPECIFIED
3. Explanation:
The first character x. of the
operand of the standard and L-form IMcro
instructions is not a quote. Macro
expansion continues.
Conversational Action
User:
N/A
System: Continues.
Nonconversational Action
Usen
N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: VSENDR Macro
Variable data supplied by: VSENDR Macro
4. EXFlanation: For standard and L-forms the
first character, X, in the operand field of
the macro instruction is not a quote. Macro
expansion is terminated.
Conversational Action
User: N/A
System: Continues.
Nonconversational Action
User: N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: W'IL, WTO, or
WTOH }'acrc
Variable data supplied by: WTL, W'IO, or
"TOR Macro
5. Explanation: The first operand, x, is not
specified as register notation but is greater than
2 16 -1. The macro expansion is terminated.
Conversational Action
USEr:
N/A
System: continues.
Nonconversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: DSSEG Macro
Var-iable data supplied by: DSSEG ~acrc
6. Explanation:
The first operand, X, is greater
than 2 16 _1. l'acro expansion is terrr,inated.
Conversational Action
User: N/A
System: Continues.
Non conversational Action
USEr:
N/A
System: Continues.
Reference Data (Also see Ap~endix B-11.)
Requirement determined by: ADDEV or R~DEV
Macro
Variable data supplied by: ADDEV or RMDEV
Macro
7. Explanation: If the first operand, x, is
greater than 2 16 _1 the value x is used and
this error message is generated.
1£ x is
specified as a character string enclosed in
apostrophes, but is not 'ALL', zero is
loaded into register O. this error message
is generated, and macro expansion continues.
General Messages
205
Conversational Action
User: N/A
System: Continues.
Nonconversational Action
User:
N/A
System: Ccntinues.
Reference Data (Also see A~pendix B-11.)
Requirement determined by: RESET Macro
Variable data supplied by: RESET Macro
8. Explanation: The first operand, x, is not a
valid code.
Zero is loaded into registers 0
and 1. Macro expansion continues.
Conversational Action
User: N/A
System: continues.
Nonconversational Action
User: N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requi rement determined by:' ALLTI Macro
Variable data supplied by: ALLTI Macro
9. Explanation:
The first operand in the macro
instruction is not 1, 2, or special register
(0).
Kacro expansion continues.
Conversational Action
User: N/A
System: continues.
Nonconversational Action
User: N/A
System: continues.
Heference Data (Also see AFpendix B-ll.)
ReqUirement determined by: ABEND Macro
Variable data supplied by: ABEND Macro
10.Explanation: The first operand, x, is invalid.
A NOP is generated instead of the BO
instruction. Macro expansion continues.
Conversational Action
User: N/A
Systerr,: continues.
Nonconversational Action
User: N/A
System: continues.
Reference Data (Also see A:fpendix B-11.)
Requirement determined by: ATPOL Macro
Variable data supplied by: ATPCL Macro
11. Explanation: An invalid ENTRY operand, x, was
specified. Macro expansion continues.
Conversational Action
User:
N/A
System: continues.
Nonconversational Action
User:
N/A
System: Continues.
Reference Data (J'.lso see Appendix B-11.)
ReqUirement determined by: CALL Macro
Variable data supplied by: CALL Macro
12. Explanation: The first operand, X, is not less
Zero is loaded into register 0,
than 256.
and macro expansion continues.
Conversational Action
User: N/A
System: Continues.
NOllconversational Action
User: N/A
System: Continues.
Reference Data (Also see AFpendix B-l1.)
Requirement determined by: CHAP Macro
Variable data supplied by: CHAF Macro
206
13. Explanation: The first operand, x, is greater
than 2~2-1, so the two high-order bytes of
register 1 are set to zero. Macro expansion
continues.
Conversational Action
User:
N/A
System: Continues.
Nonconversational Action
User: N/A
System: Continues.
Reference Data (Also see Appendix B-l1.)
Requirement determined by: CNSEG Macro
Variable data supplied by: CNSEG Macro
14. Explanation: The specified operand, x, is not
nUll, USER, or PRIVILEGED.
~CHDCLS is set
to zero. No further macro expansion occurs.
Conversational Action
User: N/A
System: continues.
Ncnconversational Action
User: N/A
System: continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: DCLASS Macro
Variable data supplied by: DCLASS Macro
The operand, x, is greater than
Macro expansion is terminated.
Ccnversational Action
User: N/A
Gysterr: Continues.
Nonconversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix B-ll.)
Requirement determined by: SETTU Macro
Variable data supflied by: SETTU Macrc
1S.Explanation:
5S,36~,812.
16.Explanation: The first operand specified as an
invalid value, x, and its value is
considered to be zero. Macro expansion
continues.
Conversational Action
User: N/A
System: continues.
Ncnccnversational Action
User: N/A
System: continues.
Reference Data (Also see Appendix B-ll.)
Requirement determined by: ~RROR or SYSER
~acro
Variabl'e data supplied by:
Macro
ERROR or SYSER
17.Explanation: The first operand, x, is not AR,
AS, AL, AD, SR, SS or (0).
The invalid
value specified is used. ~acro eXfansion
continues.
Conversational Action
User: N/A
System: continues.
NonconvErsational Action
User:
N/A
Systerr: Continues.
Reference Data (Also see Afpendix B-l1.)
Requirement determined by: PURGE Macro
Variable data supplied by: PURGE Macro
18.Explanation: The first, or tr, operand is not
WAIT, TASK, or REAL.
&CHAR is set to Rand
&FUNCT is set to S. Macro expansion
continues.
Conversational Action
User: N/A
system: continues.
Reference Data (Also see Appendix B-~1.)
Requirement determined by:
ERROR cr SYSER
Macro
Variable data supplied by:
ERROR or SYSER
Macro
system: continues.
Nonconversational Action
User:
N/A
System: continues.
Reference Data (Also see AFpendix B-~1.)
Requirement determined by:
STIMER Macro
Variable data supplied by:
STIMER Macro
19. Explanation:
The first, or tr , operand is
specified as other than TASK or REAL.
~CHAR
is set to R.
Macro expansion continues.
Conversational Action
User:
N/A
System: continues.
Nonconversational Action
User:
N/A
System:
continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: TTl MER Macro
Variable data sUFplied by: TTI~ER Macro
***CHD002 INVALID INHIBIT OPERAND SPECIFIED -- x.
Explanation: The INHIBIT operand, x, is
invalid in the standard or L-form.
Macro
expansion continues.
Conversational Action
User: N/A
System:
Continues.
Ncnconversational Action
User: N/A
Systerr:
Continues.
Reference Data (Also see Appendix B-1~.)
Requirerr,ent determined by:
SIR Macro
Variable data supplied by:
SIR Macro
20.Explanation:
The value of the device operand
is greater than 214_1. Therefore, the value
is taken as zero. The rr.acro expansion
continues.
x -- device specified.
Conversational Action
User:
N/A
System:
continues.
Nonconversational Action
User:
N/A
System: continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by:
SETAE Macro
Variable data sUFFlied by:
SETAE Macro
***CHD002 INVJI.LID FOURTH OPERANt; SPECIFIED
***CHD002 INVALID INTTYP OPERAND SPECIFIED -- x.
x.
1. Explanation: The fourth oFerand, x, is an
invalid code.
A value between 0 and 3,
inclusive, is OR'd into reg~ster 15. and
macro expansion continues.
Conversational Action
User:
N/A
System: continues.
Nonconversational Action
User:
N/A
System: Continues.
Reference Data (Also see AfCpendix B-11.)
Reqy.irement determined by:
ADSPG Macro
Variable data sUFfClied by:
ADSFG Macro
2. Explanation: The fourth operand, x, can only
be specified as I or E.
l'acro Expansion
continues.
Conversational Action
User:
N/A
System:
Continues.
Nonconversational Action
User:
N/A
Systerr.: continues.
Reference Data (Also see AFFendix B-11.)
Requirement determined by: CALL Macro
Variable data sUfCFlied ty:
CALI. !lacro
3. Explanation:
The fourth oper~nd, x, is an
invalid value, and its value is considered
to be zero.
Macro expansion continues.
Conversational Action
User:
N/A
Systerr.:
Continues.
Nonconversational Action
User:
N/A
1. Explanation:
If the INTTYP operand, x,
specifies a value that was outside the range
allowed for the privilege of the program,
not.hing is generated in the E-form, a
half-wcrd zero is generated in the L-form
for nonprivileged prograrr.s, and a half-wcrd
containing 219 is generated in the L-forn
for privileged programs.
Macro expansion
continues.
Conversational Action
User: N/A
Systen:
continues.
Nonconversational Action
User:
N/A
System:
Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by:
SEEC Macro
Variable data supplied by:
SEEC Macro
2. Explanation:
The INTTYP operand, x, is not a
valid code or integer.
A full-word of zero
is generated in thE L-forrn and nothing is
generated in the E-form.
Macro expansion
ccntinues.
Conversational Action
User: N/A
System:
Continues.
Ncnconversational Action
User: N/A
System:
Continues.
Reference Data (Also see Appendix B-~l.)
Requirement determined by: SPEC Macro
Variable data supplied by:
SPEC Macro
3.
Explanation:
If the INTTYF operand, x, is not
TASK or REAL, or if the total number of
characters is not five or six, it is
invalid. Macro expansion continues.
Conversational Action
User:
N/A
System: Continues.
Nonconversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix E-ll.)
Requirement determined by:
STEC Macro
Variable data supplied by:
STEC Macro
General Messages
207
q. Explanation: The INTTYP operand. x, is
specified as an integer greater than 63, a
full-word of zero is generated in the
L-forro; nothing is generated in the E-forrn.
Macro expansion continues.
Conversational Action
User:
N/A
System: continues.
Nonconversational Action
User:
N/A
System:
continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: SSEC Macro
Variable data supplied by: SSEC Macro
5. Explanation: The n of the inttyp operand, x,
i.s less than 8 or greater than 15. Macro
expansion continues.
Conversational Action
User:
N/A
System: Continues.
Nonconversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix B-l1.)
~quirement determined by:
STEC Macro
Variable data supplied by: STEC Macro
***CHD002 INVALID INTTYP/ATTNTYP OPERAND SPECIFIED
x
x is the invalid operand, INTTYP
or ATTNTYP is invalid. No further macro
expansion oocurs.
Conversational Action
User:
N/A
System: continues.
Nonconversational Action
User:
N/A
System: continues.
Reference Data (Alse see Appendix B-11.)
Requirement determined by: SAEe Macro
Variable data supplied ty: SAEe Macro
Requirement determined by:
Variable data supplied by:
ADCON Macro
ADCON Macro
***CHD002 INVALIC LENGTH OPERAND SPECIFIED -- x.
1. Explanation: This message will be generated
when test length of L is greater than 50 or
less than 2, where X is the value of the
length. Macro expansion terminated.
Conversational Action
User:
N/A
System: continues.
Nonconversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by:
EBCDTIME Macro
Variable data supplied by: EBCDTlME Macro
2. Explanation:
x is the invalid length operand,
which was specified as register notation or
a number greater than 32,760.
No macrc
expansion occurs.
Conversational Action
USEr:
N/A
System: Continues.
Nonconversational Action
User:
N/A
System: continues.
Referenoe Data (Also see Appendix B-11.)
Requirement determined by: GETPOOL Macro
Variable data supplied by: GETPOOL Macro
~lanation:
***CHD002 INVALID KEYWORD OPERAND SPECIFIED -- x.
Explanation:
x is the invalid operand. The ID
operand specified a value greater than Q095.
Macro expansion continues.
Conversational Action
User:
N/A
System: Continues.
Nonconversational Action
UseL:
N/A
System: continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: CALL Nacro
Variatle data supplied by: CALL Macro
3. Explanation: The length operator in the macro
instruction is greater than 256 and the
value specified, x, is used. Macro
expansion continues.
Conversational Action
User: N/A
System: continues.
Nonconversational Action
User: N/A
System:
continues.
Reference Data (Also see Appendix B-l1.)
Requirement determined by: VSENDR or WTOR
Macro
Variable data supplied by: VSENDR or WTOR
Macro
Q. Explanation:
x is the invalid operand.
An S
code was specified for an access method
other than BSAM.
No macro expansion occurs.
Conversational Action
User: N/A
System:
Continues.
Nonconversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: WRITE Macro
Variable data supplied by: WRITE Macro
***CHD002 INVALID LDERR OPERAND SPECIFIED -- x.
***CHD002 INVALID MF OPERAND SPECIFIED -- x.
Explanation:
x is the invalid operand. The
only valid codes for LDERR are null, CODE,
and ERR. Macro expansion continues.
Conversational Action
User:
N/A
System:
Continues.
Nonconversaticnal Action
User: N/A
System: continues.
Reference Data (Also see Appendix B-11.)
208
1. Explanation: An invalid MF operand, x, was
specified. Macro expansion continues.
Conversational Action
User: N/A
System: continues.
Nonconversational Action
User: N/A
System: continues.
Reference pata (Also see Appendix B-11.)
Requirement determined by:
Macro
Variable data supplied by:
Macro
CSTORE or SIR
CS'rORE or SIR
2. Explanation: An invalid MF operand, x, was
sl'ecified. No further macro expansion
occurs.
Conversational Action
User: N/A
System: continues.
Nonconversational Action
User: N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: CALL, CLOSE,
DIR, FIND, FINDJFCB, LIBESRCB, OPEN,
SAEC, SEEC, SIEC, SPEC, SSEC, or STEC
Macro
Variable data supplied by: CALL, CLOSE,
DIR, FIND, FINDJFCB, LIBESRCH, OPEN,
SAEC. SEEC. SIEC, SPEC, SSEC, or STEC
Macro
3. Explanation: The list operand of the E-form of
the macro instruction was omitted. Macro
expansion is terminated.
User: N/A
System: continues.
Nonconversational Action
User: N/A
System: Continues.
Reference Data (AlSO see Appendix B-11.)
Requirement determined by: GATRD, GTWAR, or
GTWSR Macro
variable data supplied by: GATRD, GTWAR, or
GTWSR Macro
7. Explanation: The invalid operand, X, is not E,
L, or null; or it is E and the number cf
subparameters in MF is not 2 or it is nUll.
Macro expansion is terminated.
Conversational Action
User:
N/A
System: Continues.
Nonconversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: GATWR Macro
Variable data supplied by: GATWR Macro
8. Explanation:
x -- omitted MF operand.
Conversational Action
User: N/A
System: Continues.
Nonccnversational Action
User: N/A
System: ContinUES.
Reference Data (Also see Appendix B-11.)
Requirement determined by:
CAT, CDD,
DDEF, DEL, MSGWR, PR, PU, REL, WT,
or WTO Macro
Variable data supplied by:
CAT, CDD,
DDEF, DEL, MSGWR, PR, PD, REL, WT,
or WTO Macro
CDS,
WTL,
The MF keyword operand is net
valid, where x is the invalid operand.
ti.acro expansion is terminated.
Conversational Action
User: N/A
System: Continues.
Nonconversational Action
User: N/A
Systeui: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: VSENDR Macro
Variable data supplied by: VSENDR Macro
CDS,
WTL,
4. Explanation: The MF operand, x. is not valid.
Macro expansion terminated.
Conversational Action
User: N/A
system: Continues.
Nonconversational Action
User: N/A
system: continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by:
EBCDTIME Macro
Variable data supplied by:
EBCDTIME Macro
5. Explanation: The list operand is missing in
the E-form macro instruction, where x is the
invalid MY operand.
Macro expansion is
terminated.
Conversational Action
Dser: N/A
System:
Continues.
Nonconversational Action
User:
N/A
System:
Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: FINDDS or WTOR
Macro
Variable data supplied by: FINDDS or WTOR
Macro
6. Explanation: The MF operand, x, is not E, L,
or nUll, and is therefore invalid. The
macro expansion is terminated.
Conversational Action
***CHD002 INVALIL MODE OPERAND SPECIFIED -- x.
1. Explanation:
x is the invalid mode operand.
Tbe only 3 valid operands for mode are R:
PAGE; and PAGE, VAR.
Macro expansion
continues.
Conversational Action
User:
N/A
System: Continues.
Nonconversational Action
User: N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: GETMAIN or
FREEMAIN Macro
Variable data supplied by: GETMAIN or
FREEMAIN Macro
2. Explanation: The mode operand, x, is not
valid. The only valid mode operands are R,
w, and CLEAR. No further n:acro expansion
occurs.
Conversational Action
User: N/A
System: Continues.
Nonconversational Action
User: N/A
system: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: INTINQ Macro
Variable data supplied by: INTINQ Macro
***CHD002 INVALID MSGLTH OPERAND SPECIFIED -- x.
General Messages
209
Explanation: The MSGLTH operand, x, is greater
than 238; therefore, a halfword of zero bits
is generated in the L-forrr., and nothing is
generated in the E-form.
/!Iacro expansion
continues.
ConversationaJ Action
User:
N/A
System: Continues.
Nonconversational Action
User:
N/A
5ysterr.: Continues.
Reference Data (Also see Afpendix B-ll.)
----R-equirement determined by: SEEC Macro
Variable data sUfplied t:y: SEEC Macro
system: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by:
GETMAIN Macro
Variable data supplied by: GETMAIN Macrc
***CHD002 INVALID PFKMSK OPERAND SPECIFIED -- x.
Explanation:
The PFMSK operand, x, is not a
valid code or integer.
A full word of zeros
is generated in the L-form; nothing is
generated in the E-form.
Macro eXfansion
continues.
Conversational Action
User: N/A
S~stew:
Continues.
Nonconversational Action
User: N/A
Svsterr: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by:
SAEC Macro
Variable data supplied ty: SAEC Macro
***CllD002 INVALID OPTION OPERAND SPECIFIED -- x.
Bxplanation:
x is the invalid option code.
The vafid codes for Oftion are REREAD and
LEAVE.
Macro expansion stofs.
Conversational Action
User: N/A
System: continues.
Nonconversational Action
User:
N/A
System: continues.
Reference Data (Also see Appendix B-11.)
Requirerr.ent determined 1::y: CLCSE l':acro
Variable data supplied by: CLOSE Macro
***CHD002 INVALIL PH OPERAND SPEC IF LED -- x.
~lanation:
The PR operand, x, is invalid.
The PR oferand can onl.y be 0, 1, or 2.
Macro expansion continues.
Conversational Action
User:
N/A
System: Continues.
Nonconversational Action
User:
N/A
System: Continues.
Reference Data (Also see Apr;endix B-1!.)
Requirement determined by:
GETMAIN Macro
Variable data supplied by: GE'IMAIN Macrc
***CHD002 INVALID OPTION1 OPERAND SPECIFIED -- x
EXflanation:
x is the invalid OPTl operand.
The valid options for OPTl are:
INPUT,
OUTPUT, INOUT, OUTIN, RDBACK, UPDAT.
No
further macro ex~ansion occurs_
~Q!lv~,rsational ActiQl}
User:
N/A
"'ystem: Continues.
_Nonconversat_ional Action
User:
N/l\
System: continues.
Refe1.-ence Data (Also see An:endh, B-ll.)
Requirernent~ dete.rrnined 1::y:
OPEN l'acro
Variatle data supplied by:
OPEN Macro
***CHD002 LNVALIL PRTY OPERAND SPECIFIED -- x.
Th~ PRTY operand, x, is invalid.
expansion continues.
Conversational Action
User: N/A
Systen::
ContinUES.
Nonconversational Action
User: N/A
Systerr:
continues.
Reference Data (Also see Apfendix B-1!.)
Requirement determined by: SIR Macro
Variable data supplied by: SIR Macro
~~lanation:
~acro
***CHD002 INVALID OP,{'ION2 OPERAND SPECIFIED -- x
Explanation:
The opt2 oferand, x, is invalid.
The only valid codes for opt2 are REREAD and
LEAVE.
Macro eXFansion terminates.
Conversational Action
User:
N/A
SysteIl': ccntinues.
Nonconversational Act_ion
U:ser:
N/A
Systerr.: Continues.
Reference Data (Also see Afpendix 13-11.)
Requirement determined by: OPEN Macro
Variable data supplied by: OPEN Macro
***CHD002 INVALIL REGIS) OPERAND SPECHIEL -- x.
The reg oferand, x, is invalid.
REG1 is less than 8 or greater than 15: cr
hEG2 is greater than 15. No further macro
expansion occurs.
Ccnversational Action
User:
N/A
Systen:
Continues.
Ncnconversational Action
User:
N/A
system: Continues.
Reference Data (Also see Appendix B-l1.)
Requirement determined by:
BESUME or STORE
Macro
Variable data supplied by:
RESUME or STORE
Macro
1. ;g:~lanation:
***CHD002 INVALID PACK OPERAND SPECIFIED -- x.
The PACK operand, x, is invalid.
The only valid values for PACK operand are
0, 1, 2.
Macro expansion continues.
Conversational Action
User:
N/A
ExplanatioI)~
Syr5terr:
continues ..
~onaonversational
User:
210
N/A
Potion
2.
;g:~E1£nation:
The reg operand, x, is invalid.
The range of registers specified by REGI and
REG2 includes 13.
No furthex macro
expansion occurs.
Conversational Action
User:
N/A
System: continues.
Nonconversational Action
User:
N/A
System: continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by:
HETURN or SAVE
Macro
Variable data supplied by:
HETURN or SAVE
Macro
***CHD002 INVALID HEGISTER NOTATION SPECIFIED -x.
1.
EXFlanation: A register, x, was specified
which is less than 2 or greater than 12, and
is therefore invalid.
The macro expansion
is terminated.
One exception is the E-forrn
macro instruction where the list operand can
be register 1.
Conversational Action
User:
N/A
System: Continues.
Nonconversational Action
User:
N/A
Systerr: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by:
CAT, CDD, CDS,
DDEF, DEL, FINDJFCB, MSG'ilR, PR, PU, REL,
VSENDR, WT, or WTOR Macro
Variable data supplied by:
CAT, CDD, CDS,
DDEF, DEL, FINDJFCB, MSGWR, FR, PU, REL,
VSENDR, WT, or WTOR Macro
2. EXFlanation:
The operand, x, is specified as a
register less than 2 or greater than 12.
The invalid register specified is used, and
macro expansion continues.
Conversational Action
User:
N/A
Systerr: Continues.
Nonconversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix B-l1.)
Requirement determined by:
INTINQ, RAE,
SAL, or SIEC Macro
Var~able data supplied by:
INTINQ, RAE,
SAL, or SIEC Macro
3. Explanation:
The cperand, x, specifies an
invalid register in the E-forrr,. The
register specified is used. Macro expansion
continues.
Conversational Action
U"er:
N/]l
Systew:
continu~s.
Nonconversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix £-11.)
Requirement determined by:
SAEC or SPEC
r~acrc
Variable data supplied ty:
SAEC or SPEC
~acro
4. £xpldnation:
The operand specifies a register
in the F-form; if it is less than 2 or
greater than 12, it is invalid. The
register specified is USEed, and macro
expansion continues.
Conversational Action
User: N/A
Systcerr,: Continues.
Nonconversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by:
SSEC or STEC
Macro
Variable data supplied by:
SSEC or STEC
Macro
5. Explanation:
The operand of the macro
instruction was specified as special
register (0) or as a register greater than
12. The register specified is used, and
macro expansion continues.
~onversational Action
User:
N/A
System: Continues.
Nonconversational Action
User: N/A
Systerr:
Continues.
Reference Data (Also see Appendix B-l1.)
Requirement determined by: COz.:MAND, EXIT,
or PAUSE ~acro
Variable data supplied by: COMMAND, EXIT,
or PAUSE /v'acro
6. Explanation: An invalid register number, x,
~as specified.
The invalid register number
is used in the expansion.
Macro expansicn
continues.
Conversational Action
User:
N/A
System: continues.
Ncnconversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
hequirement determined by: CALL, CLOSE,
CSTORE, DIR, FIND, FREE~AIN, GETMAIN,
INVOKE, OPEN or SETAE Macro
Variable data supplied by:
CALL, CLOSE,
CSTORE, DIR, FIND, FREE~iliIN, GETMAIN,
INVOKE, OPEN or SETAE Macro
7. EXFlanation: An invalid register number, x,
was specified. Macro ex.ransicn tern,inates.
Conversational Action
User:
N/A
System: Continues.
Ncnccnversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix B-l1.)
R~quirement determined by:
DELETE l~acro
Variable data supplied by: DELETE Macrc
8. Explanation: The first and/or second operand,
x, is register notation, and is less than 2
or greater than 12. Expansion is
terminated. One exception is the E-forre
rracro instruction where the list operand can
bE register 1. This is in the third
cperand.
Conversational Action
User: N/A
Systerr,: Continues.
Nonconversational Action
User: N/A
Syst<.2m: Continues.
Reference Data (Also see Appendix B-l1.)
Requirement determined by: GATRD or GATWR
.Macrc
General Messages
211
Variable data supplied by:
GATRD or GATWR
User:
N/l\
System: Continues.
Nonconversational Action
User:
N/A
System:
ContinUes.
Reference Data (Also see Appendix B-11.)
Requirement determined by:
CNTRL Macro
Variable data supplied by:
CNTRL Macro
ttacro
9. Explanation:
The first, second, and/or third
operand, x, is register notation; and if the
register, x, is less than 2 or greater than
12, expansion is terminated.
One exception
is t_he E-form macro instruction where the
list opeL-and can be register 1.
This is the
fourth operand.
COllversational __~ction
User:
N/A
System:
Continues.
Nonconversational ActioI1
User:
N/A
System:
Continues.
f\eference Dat_-",_ (Also see Arpendix B-11.)
Requirellient determined by:
FINDDS Macro
Variable data supplied by:
FINDDS Macro
10.
E~Jc.9nal:i.'2!l..'
'I'he first_. second, third, and/or
fourth operand, x, is register notation, and
is less than 2 or greater than 12.
Macro
expansion is terminated.
One exception is
the E-form macro instruction where the list
o~erand can be register 1.
This is in the
fifth operand.
COQversationa l_Ac:tiQD
User:
N/A
System:
Continues.
Nonconver~~:!:ional ActiQ!}
User:
N/A
Systerr-:
ccnt_inues ..
!!~:f.§.!~nc~_!2ata (Also see Ar:pendix Ii-H.)
Requirement determined ty:
GTWAR or GTWSR
Macro
Variable dat:a supplied ty:
GTWAR or GTWSR
4. Explanation: The second operand, x, is
invalid.
The type operand can only be the
code K or R.
No further macro expansion
occurs.
Conversational Actiq~
User:
N/A
System:
Continues.
~cnconversational Action
User:
N/A
System:
ContinUes.
Reference Data (Also see Appendix B-11;)
Requirement determined by:
DELREC Macre
Variable data supplied by:
DELREC Macro
5.
User:
N/A
System:
Continues.
Nonconversational Action
User:
N/A
System:
continues.
Referenc~ Data (Also see Appendix B-l1.)
Requirement determined by:
ERROR or SYGER
Macro
Variable dat.a supflied by:
ERROR or SYSER
Macro
6 • .~lanation:
The second operand, x, is
invalid.
Either invalid register notation
was used, or the second operand had a valUe
greater than 255.
No macro exr-ansion
1. Ex£lanation,-- The sE'cond or-erand, x, is
invalid.
The second is not sFeeified as a
sublist or VL, or I, or E.
No further macro
expansion occnrs ..
Conversational Action
U~;er:
N/j1,
occurs ..
<;;onvers-':ltiona.L..ActiC2.n
User:
N/j1,
System:
Continues.
Nonconversational Action
user:
N/A
System:
continues.
Reference D~~ (Also see Appendix B-11.)
Requirement determined by:
GETPOOL Macre
variable dat.a supplied by:
GETPOOL Macrc
------
System:
Continues.
Nonconversational,ActiS':!l
User:
1'/1-\
System:
Continues.
Befe,rence Data (Also see AfFendix B-l1.)
Requirement_ determined by:
CALL Nacro
Variable ddta supplied Ly:
CALI tlacro
7.
2. Explanation:
The second operand, x, is greater
toan 216 -1.
The two low-order tytes of
x_ ec;istEcr 1 dre set, to zero, and macro
expansion continues.
Conversational Action
User:
N/]\
Systew: continues.
Nonconversat.ional Acticn
--- U~;er:
N/A - - - - - - S}st_em:
Continues.
~eference~ata (Also see Af~endix B-l1.)
Requirement determined by:
CNSEG Macro
Variable data sUl:rlied l;y:
CNS:SG t'lacro
4.
5.
Explanation: 'The invalid tYFEo, x, is detected,
and &CTR is set to 217. Milcro expansion
con~inues as though tnere had been no error.
Conversational Action
User: N/A
S~stem:
Continues.
NoncoLversational Action
User:
N/l\
Systen,: Continues.
Reference Data (Also see Afpendix B-11.)
Reyuirement determined by:
SPATH Macro
Variable data supplied ry:
SPATH Macro
x is the invalid operand.
The
TYPE operand can be one of the codes: N,
NA, R, D, D, DA, C, or CA.
Conversational Action
User:
N/A
system:
Continues.
I'jonccnversational Action
User:
N/A
S1ste~:
continues.
Reference Data (Also see Appendix B-11.)
~xElanation:
Requirement determined by:
Variable data supplied by:
STOW Macro
S'IOW Macro
***CHD002 LV OPERAND REQ'D -- NOT SPECIFIED.
Explanation: The LV operand is missing. Macro
expansion continues.
Conversational Action
User: N/A
System: Continues.
Nonconversational Action
User: N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: FREEMAIN or
GETfo'AIN Macro
Variable data supplied by: FREEMAIN or
GETlIAIN ~acro
***CHD002 RESTART
Ih~ALID
-- SET TO NO.
Explanation:
If the RESTART operand is not
null, NO, or YES, NO is assu~ed, the atove
error I[,essage is generated, and macro
expansion continues.
Conversational Action
User: N/A
System: continues.
Ncnconversational Action
User: N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
REquirement determined by: SAEC Macro
Variable data supplied by: SAEC Macro
*** caDOO 4
REQU IRED OPERAND (S)
NO'I SPECIFIED.
1. Explanat;ion: The macro instruction is not
E-for~, and the operand is nUll.
Macro
expansion is terminated.
Conversational Action
User: N/A
System: Continues.
Ncnocnversaticnal Action
User: N/A
System: Continues.
Ref~rence Data (Also see Appendix B-11.)
Requirement determined by: CAT, CDD, CDS,
DDEF, LEI, INVOKE, PR, PU, REL, or WT
Macro
Variarle data supplied by: CAT, CDD, CDS,
DDEF, DEL, INVOKE, PR, PU, REL, or WT
Macro
2. Explanation: The E-form is specified by the t'F
operand, and no other operands are
specified.
fiacro expansion is terIl1inated.
Conversational Action
User: N/A
system: Continues.
Nonconversational Action
User: N/A
C,ysteIr:
Continues.
f(SG area operand
is specified as register notation in the
L-form. A zero adcon is generated and macro
expansion continues.
Conversational Action
User: N/A
System: Continues.
Nonconversational Action
User: N/A
System: Continues.
Reference Data (Also see Appendix B-ll.)
Requirement determined by: SEEC Macro
Variable data supplied by: SEEC
adcon is generated. Macrc expansion
continues.
Conversational Action
User: N/A
System: Continues.
Nonconversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix B-ll.)
Requirement determined by: VSENDR Macro
Variable data supplied by: VSENDR Macro
***CHD013 ME:3SAGE OPERAND NOT ALLOWED W/MF = E.
Explanation: There is a ~£G operand i n t~~
E-forrr macro instruction that is not
allo~ed.
Macro expansion continues.
Conversational Action
User: N/A
System: Continues.
Ncnconversational Action
User: N/A
System: Continues.
Reference Data (Also see Appendix B-ll.)
Requirement determined by: VSENDR or WTOR
Macro
Variable data supplied by: VSENDR or WTOH
Macro
8. Explanation:
9. Explanation:
The icb operand is specified as
register notation in the L-form and a zero
adcon is generated. Macro Expansion
continues.
Conversaticnal Action
User:
N/A
System: continues.
Nonconversational Action
User: N/A
System: continues.
Reference Data (Also see Appendix B-l1.)
Requirement determined by: ~3IR Macro
Variable data supplied by: SIR Macro
10. Ex;::lanation: The COMAREA cperand is specified
as register notation in the L-form and a
zero adcoD is generated. Mdcro expansion
continues.
Comversational Action
User: N/A
System: continues.
Nonconversational Action
User: N/A
System: ccntinues.
Reference Data (Also see Appendix B-l1.)
Requirement determined by: SPEC, SSEC, or
ST.t:C Macro
Variatle data supplied by: SPEC, SSEC, or
STEC IotJacro
11. Ex;::lanation: Register notation is specified in
the L-forrr rracro instruction and a zero
***CHD013
OP~IST
OPERAND NOT ALLOWED W/MF
=
E.
1. Explanation: There is an oplist operand in the
E-forrn macro instruction. This is not
allowed. The macro expansion continues.
Conversational Action
User:
N/A
System: continues.
Nonconversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix B-ll.)
Requirement determined by: CAT, CDD, CDS,
DDEF, DEL, PR, PU, REL, WT, or WTO Macro
Variable data supplied by: CAT, CDD, CDS,
DDEF, DEL, PR, PU, REL, WT, or WTO Macro
2. Explanaticn: Macro expansion terminated.
Ccnversational Action
User:
N/A
System: Continues.
Nonconversational Action
User:
N/A
Systerr: Continues.
Reference Data (Also see Appendix B-l1.)
Requirement determined by: EBCDTIME Macro
Variable data supplied by: EBCDTIME Macro
***CHD015 MORE THAN ONE OF EP OR EPLOC PRESENT.
Explanation: Both EP and EPLOC were specified.
~acro expansion continues.
Ccnversational Action
User: N/A
System: Continues.
Ncnconversational Action
User: N/A
System: Continues.
Reference Data (Also see Appendix B-l1.)
Requirement determined by: I:ELETE or
FREEMAIN Macro
Variable data supplied by: DELETE or
FREEMAIN Macro
General Messages
217
***CHD02Q CSECT NAME BLANK.
MACRO NAME OMITTED.
Explanation:. The ID operand is an asterisk,
the name field is blank, and the macro
instruction resides in an unnamed control
section. N'J trace string will be provided.
Macro expansion continues.
Conversational Action
User:
N/A
System: Continues.
Nonconversational Action
User:
N/A
System: Continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: SAVE Macro
Variable data supplied cy: SAVE Macro
***CHD025 PACK OPERAND NOT ALLOWED W/MODE= R
Explanation:
The PACK operand was specified
when the MODE o.t;:erand was specified as R.
Macro expansion continues.
Conversational Action
User:
N/A
System: continues.
Nonconversational Action
User: N/A
System: continues.
Reference Data (Also see Appendix B-11.)
Requirement determined by: GETMAIN Macro
Variable data supplied by: GETMAIN Macro
***CHD050 BIJHl-:
PARA~.
Ac!jon
User:
N/A
::;YEtem:
continues.
Reference Data UUEO see Appendix B-I!.)
- - Requirement deterwined by:
DCB Macre
Varial::le data supplied by:
GCE Macro
***CHD072 MULTIPLE DEVICE DEP.
PARN~.
SP:ECIFIED -- IGNORED -- TRTCH = x
2
~lanation:
x is the extra device dependent
parameter 2 ('IRTCH) sfecified.
Macro
expansion continues.
Conversational Action
User:
N/A
System:
continues.
Nonconversational Action
User:
N/A
System:
Continues.
Reference Data (Also see ApFendix 13-11.)
Requirement determined by:
CCB Macro
Variable data sUfFlied I:;y:
CCB !',acro
Nonconversational Action
User:
N/A
System:
continues.
Reference Data (Also see Appendix B-11.)
kequirement determined by:
DCB Macro
Variable data supplied by:
DCE Macro
***CHDlOl ZERO USED FOR EODAD ReON.
Explanation: A zero was used for the EODAD
R-con.
Macro expansion continues.
Conversational Action
User:
N/A
System:
continues.
Nonconversational Action
User:
***CHD0711 PAC OPERANL GT 50 -- SPl:.CIFIED VALUE
USED -- x
Explanation:
x is the invalid PAD oFerand.
The PAD operand should be fron, 1% to 50%.
This PAD sfecified between 51% and 1001.
Macro expansion continues.
Conversational Action
User:
N/A
SystE,m:
continues.
Nonconversational Action
User:
N/A
Systerr:
Continues.
Reference Data (Also see Appenaix E-11.)
Requirement determine,j by:
DCB }~acro
Variable data SUFrlied r:.y:JC3 l'ldcro
N/A
System:
Continues.
Data (Also see AFpendix B-l1.)
rlequirEment determined by:
CCE Macro
Vari.able data supplied by:
DeB Macro
Ref~reDce
***CHDI01 ZERO USED FOR SYNAD ReON.
Explanation: A zero was used for SYNAD R-con.
tIacro expansion continues.
Ccnversat ional Action
User:
N/A
~ystem:
Continues.
~onconversaticnal Action
User:
01/A
cc~tinues.
SystClti:
."ef'crEnce Data
(Also see Appendi::.. E-11.)
DCE Macro
Varidble data supplied by:
DCB Macro
---K~~uirement determined by:
***CHC075 VAR OPERANl: tmT ALLOWED ",//:I1CDE =R.
Explanation: The VAR operClnd W3S specified
illegally when the MaCE operand was
specified as R.
Macro ex~ansion continues.
Conversational Action
User:
N/A
System:
Continues.
Nonconversational Acticn
User:
N/A
System:
Continues.
Reference Cata (Also see Affendix B-11.)
Requiren;ent deterrr,ined I:;y:
FREEMAIN or
GErMAIN Macro
Variable data sliFl-lieel t j :
FREEI,AIN or
GETMAIN I"Clcrc
***ChlJIC3 ADLEV l>'?,CRO GOT ALLO.,ED .FOR
NONPRIVIIl:.GED USER.
J:::!'Llan~!:jsn:
ex~ansic~
The user is nonprivileged.
r·jacro
continu~s~
COJ1v(Cr sa t,ig fl'l L ActiQ!}
uSEr":
DystElr:
~~/_A
Ccnt.iriues.
Noncon~~iltlonal l\ctiOl1
User:
SystF:r'_'!
1\/;l
CcntinuE::s.
RefErence Data (Also SEe ApFendix B-l1.)
Kcquircrnent determineu by: ADDEV Macrc
Variable data supplied by:
ALLEV Macro
***CHC101 CSEC'I ORIGIN USED FOR EODAD RCON.
Exr;lanaticn: A CSECT origin was used for the
EODAD R-con.
;~acro ex[ansion continues.
Conversational Action
User:
N/A
System:
Continues.
NonconversatioDal Action
User:
N/A
Systerr:
Continues.
Reference Data (Also see Appendix B-11.)
B-equirement determined by:
DCB Macro
Variable data sur:~lied I:;y:
CCB Facro
***CHDI03 ADLPG lo'ACRO "OT ALLO capability, and hence may
not specify the RJE "STATION" parameter.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZABD
Variable data supplied by: N/A
CZABD200 CANCELLED: command
CZABC500 CANCELLED: DSNAME INVALID
Explanation: The parameter for DSNAME is
either defaulted, too long, or FINDDS macro
CQuid not locate the DSNAME.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix £-12.)
Requirement determined by: CZABC
Variable data supplied by: N/A
Explanation: The return code from the FINDDS
macro instruction indicates that the corr~and
is cancelled.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
.
Requirement determined by: CZABD
Variable data supplied by: CZABD
CZABD300 CANCELLED:
CZABDI10 CANCELLED: PROMPTING FOR ABOVE COMMAND
NOT PEI,FORMED NONCONVERSATIONALLY
The command issued contained an
invalid parameter va~ue, and no valid value
can be reentered nonconversationally. Thus
the reenter is ignored and the command
cancelled, avoiding an abnorrr~l termination
of the task.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Actio~
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZABD
Variable data supplied by: N/A
Exp~anation:
CZABD160 CANCELLED:
ACCEPT YOUR OUTPUT
SPECIFIED STATION WILL NOT
User cannot print to specified
station. The station is joined with REC=N
and thus will receive on~y its own output.
Filter Code: "SA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N//l.
System: continues processing.
Reference Data (Also see Appendix £-12.)
Requirement determined by: CZABD
Var-iable data supplied J::y: N/A
234
Explanation: The TAPOPT option entered for the
PRINT command invalid for your privilege
class.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Terminates command processing
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZABD
Variable data supplied by: N/A
CZABKOOl BULKIO REQUIRED?
Explanation: N - NO BULKIO task; Y - add all
BULKIO devices; Y with operands - add the
indicated devices.
Filter Code: WSA
Conversational Action
User:
EJU2l~nation:
CZABD170 CANCELLED:
RJE FACILITIES
TAPOPT INVALID
YOU .ARE NOT AUTHORIZED TO USE
Enter
{:} [Annn] [,Annn] .•.
where nnn is an SDA for a unit record
device.
system: If 'Y' was entered with a device
list, those devices are assigned to
BULKIO. If no device list was entered,
and the operator defaults by typing EOB,
all possible devices are assigned.
If
'N' was entered, no action takes place.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZABK
Variable data supplied by: N/A
CZABK002 INVALID REQUEST entry REENTER ALL
OPERANDS OF COMMAND
Explanation: An error has been found in the
operand string.
reason
=
'UNIT REC': the device specified
is not a unit record device.
'AVAIL':
device unavailable.
'EXISTENT':
no such sda.
point).
'NO' ASSUMED DURING
STARTUP': if entered through
CZABK2 (startup entry point).
Filter Code: WSA
Conversational Action
User: Reenter ASNBD command if desired.
System: Exits from CZABK
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZABK
Variable data supplied by: CZABK
'VAL CHAR': entry is invalid
character in its context.
'UNLOCKED':
long.
sda entry locked too
'UNIQUE': entry is a repetition in
this operand string.
'ADD DEV': a 'D' code was entered
while BULKIO task not initialized.
'IN AHD': no such device type.
Filter Code: XSA
Conversational Action
User: Reenter the string of operand
elements - if during startup, do not
repeat the 'Y' or 'N'.
System: Rescans the infut.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement deterrr~ned by: CZABK
Variable data supplied by: CZABK
CZABK003 reason. DEVICE ASSIGNMENT UNCHANGED FOR
ASNBD. condition.
Explanation: The corrmand 'ASNBD' has been
rejected for the specified reason.
reason = 'MOHR VSEND NOTACPT': unsuccessful
VSEND to task 2 is indicated by
MOHR.
'SCRTSI NOT TASK '2:
initialize task 2
'TOO MUCH PROMPTING':
prompting
'ATTENTION INTERRUPT':
hit REQUEST key
'DEFAULTED DEV LIST':
without infut
could not
too much
operator
EOB was hit
'VSEND RCa, NO TASK2': CZABK VSEND
return code of a indicates task 2
is nonexistent
'VSEND RC4, NOT TAKEN': CZABK
VSEND return code of 4 indicates
unsuccessful VSEND
'VSEND RC ILLEGAL'! CZABK VSEND
return code is an illegal value
condition = (all blanks) if entered through
CZABK1 (non-startup entry
CZABK004{~}device
address ACCEPTED.
Explanation: The operand (or first 16 devices
listed) was accepted during startup or from
ASNBD command.
Filter Code: WSA
Conversational Action
User: N/A
System: Initiates task 2 if necessary;
allocates the accepted devices to that
task.
Nonconversational Action N/A
User: N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZABK
variable data supplied by: CZABK
CZABK005 CANCELLED:
PROGRESS
BULKIO INITIALIZATION IN
Explanati.Q!!: The Bulkio task is in the process
of initialization and cannot accept the
corrmand at this time.
Filter Code: WSA
Conversational Action
User: N/A
System: A~its next command.
Nonconversational Action
User: N/A
Systerr: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZABK
Variable data supplied by: N/A
CZABK006 CANCE~LED: ASNBD MAY BE ISSUED ONLY BY
OPERATOR (TASKID 001)
Explanation: The ASNBD command is available
only to the system operator.
Filter. Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZABK
Variable data supplied by: N/A
CZABS001 CANCE~LED: COMMAND NOT AVAILABLE TO YOUR
PRIVILEDGE
Explanation: The user must be a manager or
administrator to use this command.
General Messages
235
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational ACTION
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZABS
Variable data supplied by: N/A
CZABS002 CANCELLED: INCORRECT STATION ID FORMAT
~xplanation:
The station ID contains invalid
characters, is too long, or is restricted.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZABS
Variable data supplied by: N/A
CZABS003 STATION identification ALREADY EXISTS;
ENTER Y FOR REJOIN OR N TO CANCEL
Explanation: The user-issued station
identification has been previously issued.
Your answer indicates whether or not you
wish to rejoin with a different station
identification.
Filter Code: WSA
Conversational Action
User: Enters Y to rejoin, or N to cancel.
System: Awaits response.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZABS
Variable data supplied by: CZABS
CZABS004 CANCELLED: NON-EXISTENT STATION ID
Explanation: ~rhe station identif ica tion to be
quit does not exist in the acknowledgement
data set member, VALIDSTA.
Filter Code: WSA
Conversational Action
User: N/A
system: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirements determined by: CZABS
Variable data supplied by: N/A
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZABS
Variable data supplied by: N/A
CZABS006 GIVE DISPOSITION OF ENQUEUED
ACKNOWLEDGEMENTS--RESPOND
Explanation: The station being quit has
pending acknowledgements.
Filter Code: XSA
Conversational Action
User: Valid responses are:
E (erase)
Q (enqueue)
I (default)
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZABS
Variable data supplied by: N/A
CZABS008 CANCELLED: ACKNOWLEDGEMENT DATA SET
ERROR. RETURN CODE=code
Explanation: An error in validation of the
station ID has occurred.
Filter Code: WRA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZABS
Variable data supplied by: CZARS
CZABS009 VALIDSTA MEMBER NON-EXISTENT.
ATTEMPT TO CREATE
WILL
Explanation: The disposition of the data set
is old, but the member was not found.
The
member will be created and a station ID
added to it.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZABS
Variable data supplied by: N/A
CZABS010 CANCELLED: SYSTEM FAULT (RC=return code)
CZABS005 CANCELLED: NON-EXISTENT ACKNOWLEDGEMENT
DATA SET
Explanation: DDEF issued a valid return code,
but there is no job file control block for
the acknowledgement data set.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next co[mlland.
236
Explanation: An unexpected return code was
received from the User Prompter.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZABS
Variable data supplied by: CZABS
CZABS011 CANCELLED: station id STILL ACTIVE
Explanation: This station cannot be quit
because it is still active in the BULKIO
task.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/JI
System: continues processing.
Reference Data (Also see Afpendix B-12.)
Requirement determined by: CZJlBS
Variable data supplied by: CZABS
CZABS012 CANCELLED: NON-CONVERSATIONAL QUITRJE
WITH ENQUEUED ACKNPWLEDGEMENTS
Explanation: The QUITRJE command cannot be
issued non-conversationally for a station
identification with acknowledgements
enqueued due to an outstanding request for
user disposition.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZABS
Variable data supplied by: N/A
CZABS013 CANCELLED: joinrje option OPTION INVALID
Explanation: Valid JOINRJE options are
TYPE-2780, MRF=Y/N, TAB=Y/N, BRK=Y/N,
REC=Y/N.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Afpendix B-12.)
Requirement determined by: CZABS
Variable data supplied by: CZABS
CZABS014 STATION stationid attributes
Explanation: This is a confirmation of the
station attributes just joined.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined £y: CZABS
Variable data supplied by: CZABS
CZABS015 CANCELLED: VALIDSTJI MEMBER NON-EXISTENT
Explanation: A QUIT cannot be executed.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZABS
Variable data supplied by: N/A
CZABS016 CANCELLED: VISAM SYNAn INVOKED IN
REJOIN. EXCEPTION CODE(DCBEX2) code
Explanation: VISAM SYNAD invoked on
WRITE-REPLACE of station ID.
Filter Code: WSA
Ccnversational Action
User: N/A
System: Awai ts next command.
Nonconversational Action
User.:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZABS
Variable data supplied by: N/A
CZ1\BS017 CANCELLED: STATION EXISTS. REJOIN
UNAVAILABLE NONCONVERSATIONALLY
Explanation: An attempt was made to join a
station that already exists. since rejoin
option is not available nonconversationally,
con.rnand is canceled.
Filter Code: WSA
Ccnversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZABS
Variable data supplied by: N/A
C~~BS802
CANCELLED: UNAUTHORIZED USE OF COMMAND
~lanation:
This command is available only to
the system operator (Task ID = 1).
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
Systen: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZABS
Variable data supplied by: N/A
CZABXOOl CANCELLED: UNAUTHORIZED USE OF COMMAND
Explanation: The user issued the LABEL
command, which is available only to the
system operator.
Filter Code: WRA
conversatIOnal Action
User: N/A
General Messages
237
system: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data
Requirement determined by: CZABX
Variable data supplied by: N/A
Message residence: SYSMLF
Message issued by: CZAEX
Destination
Conversational: User's terminal
Nonconversational: task's SYSOUT
Transrr~ttal technique:
PRMPT macro
C~ABX002
CANCELLED: TAPE PARAMETER INVALID
Explanation: The system operator did not enter
a tape type of 7, 7DC, 9, or default, in the
LABEL command.
Filter Code: WSA
Conversational Action
User: Re-enter entire LABEL command.
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data
Requirement dete~ned by: CZABX
Variable data supplied by: N/A
Message residence: SYSMLF
Message issued by: CZBAX
Destination
Conversational: System operator's
terminal
Nonconversational:
SYSOUT data set.
Transmittal technique: PRMPT macro.
CZABX003 CANCELLED: LABEL PARAMETER INVALID
Explanation: The system operator entered an
improper new label parameter in the LABEL
command.
Proper values are: one-to-six
alphameric characters; NL, which produces an
unlabeled tape, default produces an
unlabeled tape.
Filter Code: WSA
Conversational Action
User: Must re-enter entire LABEL command.
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data
Requirement determined by: CZABX
Variable data supplied by:
N/A
Message residence: SYSMLF
Message issued by: CZAEX
Destination
Conversational: System operator's
terminal
Nonconversational:
SYSOUT data set
Transmittal technique: PRMPT macro
CZABX004 CANCELLED: DENSITY PARAMETER INVALID
Explanation: The system operator entered an
improper density parameter in the LABEL
command. Proper values are: 0, for 200
b.p.i.; 1 for 556 b.p.i.; 2 for 800 b.p.i.:
default is the tape density specified at
system generation.
J'~:L1 t e-Esod_EO :
WSA
238
Conversational Action
User: Must re-enter entire command.
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data
Requirement determined by: CZAEX
Variable data supplied by: N/A
Message residence: SYSMLF
Message issued by: CZABX
Destination
Conversational: System operator's
terminal
Nonconversational: SYSOUT data set
Transmi ttal technique: PRI,.pT macre
CZABX005 CANCELLED: UNABLE TO LABEL TAPE volume.
error ERROR. RETURN CODE=code
EXplanation: The tape volume indicated could
not be labeled due to the system error
return code indicated.
Filter Code: WSA
Conversational Action
User: Operator must re-enter the entire
LABEL command.
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data
Requirement determined by: CZAEX
Variable data supplied by: CZABX
Message residence: SYSMLF
Message issued by: CZABX
Destination
Conversational: system operator's
terminal
Nonconversational: SYSOUT data set
Transmi ttal technique: PRMPT macro
CZABX007 LABEL OPERATION COMPLETE
Explanation: The tape-labeling operation
(initiated with the LABEL command) has
completed successfully.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZABX
Variable data supplied by: N/A
CZABX008 CANCELLED:
INVALID ASCII PARAMETER
Explanation: The operator has specified an
incorrect value for the ASCII parameter of
the LABEL corrooand. Correct values are Y
(ASCII) or N (EBCDIC). Default is N.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
Variable data supplied by:
CZABX009 CANCELLED:
FOR ASCII=Y
CZABX
N/A
was a program interrupt. If the initial
abnormal termination was not caused by a
program interrupt, the cc characters are
replaced by blanks.
TAPE TYPE OR DENSITY INVALID
Conversational Action
User: N/A
System: System deletes user's task.
Ncnconversational Action
User: N/A
System: System deletes user's task.
Reference Data
Requirement determined by: CZACP
Variable data supplied by CZACP
Message residence: CZACP
Message issued by: CZACP
Destination
Conversational: Operator's Terminal and
system log.
Nonconversational: Operator's Terminal
and system log.
Transmittal technique: WTL Macro
Explanation: The operator specified an ASCII
tape, but the tape type or density values
specified in the LABEL command are not
compatible with ASCII.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZABX
Variable data supplied by: N/A
CZACAOOI INVALID WTO FROM TID taskid
Explanation: An abortive attempt has been made
to write to the operator from the indicated
task ID.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZACA
Variable data supplied by: CZACA
CZACPOOl FUNCTION TERMINATED
Explanation: The ABEND processor has
determined that the function cannot complete
successfully and must be terminated
(condition code =1).
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZACP
Variable data supplied by: N/A
CZACP ABEND AT hh:mm TASKID=xxxx
{
BSNI
\\=ssss mmmmmmmm+dddddd cc
SDA .
Explanation: This message will appear every
time a conversational or nonconversational
task has been abnormally terminated. If an
error occurred in finding the time of day,
hh:rnm is overlaid with *ERR*.
hh:mm - time of day, hours and minutes.
xxxx - task identification number,
four-digit hexadecimal number assigned by
the supervisor with a possible range
starting at 0001 through FFFF.
ssss - indicates symbolic device address of
terminal abnormally terminated or batch
sequence number, in the case of a
nonversational task, as a four-digit decimal
number.
- indicates CSECT name in which the
initial abnormal termination or program
interrupt occurred, or the point at which a
FORCE or SHUTDOWN command was received by
the task.
mn~
dddddd - indicates offset within -the CSECT.
cc - indicates the program interrupt code in
case the reason for the abnormal termination
CZACQ ABEND AT hh:mm TASKID=xxxx
{
BSN}
=ssss mmmmmmmm+dddddd cc
SDA~
Explanation: This message will a~pear every
tin.e a conversational or nonconversational
task has been abnormally terminated.
If an
error occurred in finding the time of day,
hh:nm is overlaid with *ERR*.
hh:mm - time of day, hours and minutes.
xxxx - task identification number,
four-digit hexadecimal number assigned by
the supervisor with a possible range
starting at 0001 through FFFF.
ssss - indicates symbolic device address of
terminal abnormally terminated or batch
sequence number, in the case of a
nonconversational T.ask, as a four-digit
decimal number.
mmmmmmmm - indicates CSECT name in which
initial abnormal termination or program
interrupt occurred, or the point at which a
FORC:E or SHUTDOWN command was received by
the task.
dodddd - indicates offset within the CSECT.
General Messages
239
co - indicates the program interrupt code in
case the reason for the abnormal termination
was a program interrupt. If the inititial
abnormal termination was not caused by a
program interrupt, the cc characters are
replaced by blanks.
Conversational Action
User: N/A
System: System deletes user's task.
Nonconversational Action
User: N/A
System: System deletes user's task.
Reference Data
Requirement determined by: CZACQ
Variable data supplied by: CZACQ
Message residence: CZACQ
Message issued by: CZACQ
Destination
Conversational: operator's Terminal and
system log.
Nonconversational: Operator's Terminal
and system log
'l'ransmittal technique: WTL Macro
CZACQOOl TASK DELETED
Explanation: The ABEND processor has
determined that the current task must be
deleted (condition code = 2 or 3).
Filte.r Code: WSA
Conversational Actio!l
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZACQ
Variable data supplied by: N/A
CZACROOl NEW TASK LOGGED ON AT time ON date TASKID
taskid
Explanation: The previous task terminated
abnormally (condition code = 2).
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
~eference Data (Also see Appendix B-12.}
Requirement determined by: CZACR
Variable data supplied by: CZACR
CZADFOOl CANCELLED: SYSTEM FAULT.
DCBEX2=field
Explanation: SYNAD exit on SETL to end.
Filter Code: WSA
Conversational Action
User:
N/A
System: Command canceled.
Nonconversational Action
User:
N/A
System: N/A
.Reference Data (Also see Appendix £-12.)
Requirement determined by: CZADF
Variable data supplied by: CZADF
240
CZADF050 CANCELLED: VOLUME COULD NOT BE MOUNTED
Explanation: FINDDS received a return code of
X'lC' from DDEF. meaning that the volume for
the data set specified could not be mounted.
Filter Code: WSA
Conversational Action
User: N/A
system: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZADF
Variable data supplied by: N/A
CZADF100 CANCELLED: MEMBER NAME IMPROPERLY
DELIMITED OR TOO LONG
Explanation: The member name must be enclosed
in parentheses and consist of 1-8 alphameric
characters. The first character must be
alphabetic.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
system: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZADF
Variable data supplied by: N/A
CZADF101 PROCEEDING: DATA SET IS OLD AND VISAM
Explanation: The organization of this data set
is not VSAM.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZADF
Variable data supplied by: N/A
CZADF102 PROCEEDING: DATA SET IS OLD AND VSAM
Explanation: The organization of this data set
is not VISAM.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZADF
Variable data supplied by: N/A
CZADF103 PROCEEDING: MEMBER member name IS OLD AND
SEQUENTIAL
Explanation: The organization of this member
is not index sequential.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversationa1 Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZADF
Variable data supplied by: CZADF
CZADFI04 PROCEEDING: MEMBER membe.J: name IS OLD AND
INDEX SEQUENTIAL
Explanation: The organization of this member
is not sequential
Filter code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZADF
Variable data supplied by: CZADF
CZADF200 CANCELLED:
SYSTEM FAULT.
DCBEX2=dcb
Explanation: A SYNAn exit was taken on a VISAM
Write-by-Key operation.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
Sys tem: Conti nues process Lng.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZADF
Variable data supplied by: CZADF
CZADF201 CANCELLED: DATA SET data set name IS READ
ONLY
Explanation: A data set having a read-only
access level cannot be modified.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZADF
Variable data supplied by: CZADF
CZADF300 CANCELLED:
SYSTEM FAULT.
DCBEX2=dcb
Explanation: A SYNAn exit was taken on a VISAM
Write-by-Replacement operation.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZADF
Variable data supplied by: CZADF
CZADF400 CANCELLED:
SYSTEM FAULT.
DCBEX2=dcb
Explanation: A SYNAD exit was taken on a
SETL-by-Key operation.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZADF
Variable data supplied by: CZADF
CZADF500 CANCELLED:
SYSTEM FAULT.
DCBEX2=dcb
Explanation: A SYNAD exit was taken on a
DELREC operation.
Filter Code: WSA
Conversational Action
User: N/A
system: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZADF
Variable data supplied by: CZADF
CZADF900 CANCELLED: xxxx IN yyyy INVALID
Explanation: VSAM LRECL must be from 6 to 125.
inclusive. RECFM=V. For line data sets
LRECL=132. RECFM=V, RKP=4. and KEYLEN=7.
Filter Code: WSA
Conversational Action
User: N/A
System: Command ~nceled.
Ncnconversational Action
User: N/A
system: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZADF
Variable data supplied by: CZADF
CZAEA001 CANCELLED:
DDNAME MISSING
Explanation: The user issued a rDEF command
without a data definition name.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Ncnconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
CZAEA002 CANCELLED:
DDNAME ddnarne INVALID FORM.
Explanation: The user has entered an invalid
data definition name. The name must be
one-to-eight alphameric characters, the
first of which is alphabetic.
Filter Code: WSA
COriVersatIOnal Action
User: N/A
System: Awaits next command.
General Messages
241
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
CZAEA003 CANCELLED:
DSNAME EXCEEDS 35 CHARACTERS
Explanation: The data set name cannot be
longer than 35 alphameric characters.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
CZAEA004 CANCELLED: DSNAME EXCEEDS 26 CHARACTERS
FOR GENERATION DATA GROUP
Explanation: The data set name for a
generation data group cannot exceed 26
characters.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next corr~and.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
CZAEA005 CANCELLED:
FOR OS/360 DSNAME
vSNAME EXCEEDS 44 CHARACTERS
Explanation: An OS/360 data set name may not
be longer than 44 alphameric characters.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
CZAEA006 CONCELLED: DSNAME CONTAINS INVALID
RELATIVE GENERATION NUMBER
A generation data set has been
specified with an invalid relative
generation number.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues ~rocessing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variatle data supplied by: N/A
~xplanation:
242
CZAEA007 CANCELLED: DSNAME CONTAINS INCORRECT
NUMBER OF PARENTHESES
Explanation: The data set name parameter in
DDEF co~and contains an incorrect number of
parentheses.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
CZAEA008 CANCELLED: DSNAME CONTAINS INVALID
QUALIFIER SPECIFICATION
Explanation: The indicated data set name
contains an invalid qualifier specification,
or a qualifier is missing.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
CZAEA009 CANCELLED: DSNAME CONTAINS QUALIFIER
1HAT EXCEEDS 8 CHARACTERS
Explanation: A qualifier in a data set name
may not exceed 8 characters.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
CZAEAOOA CANCELLED: DSNAME CONTAINS QUALIFIER
WITH NON-ALPHABETIC FIRST CHARACTER
Explanation: A qualifier for a data set name
must begin with an alphabetic character.
Filter Code: WSA
~cnversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
CZAEAOOB CANCELLED: DSNAME data set name
NON-EXISTENT GENERATION NAME
~xplanation:
The user defined a generation
name, but data set is not cataloged as a
generation data set.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.l
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
CZAEAOOC CANCELLED:
ADD NEW GENERATION
UNLIMITED ACCESS REQUIRED TO
Explanation: The user defined a new generation
level for a data set, but he does not have
unlimited access to the generation data set.
Unlimited access is required to add a new
generation to a shared generation data set.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
CZAEA010 CANCELLED:
AT LEVEL level
Explanation: The data set is already cataloged
at different level. More qualifiers have
been specified than actually occur in the
data set name.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
Syste~:
Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
CZAEA011 CANCELLED:
name NOT IN CATALOG
CZAEAOOD CANCELLED: DSNAME data set name INVALID
OR MISSING GENERATION QUALIFIER
Explanation: The user tried to define a
generation data set, but the relative or
absolute generation data set name qualifier
was invalid or not specified.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
CZAEAOOE CANCELLED: DSNAME data set name NOT
UNIQUE FOR NEW DATA SET
Explanation: The user specified a data set
name and indicated DISP=NEW. The data set
is already cataloged.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
CZAEAOOF CANCELLED DSNAME NOT FULLY QUALIFIED
Explanation: The data set name specified could
not be cataloged because of another data set
name already cataloged.
DSNAME data set name EXISTS
DISP=OLD BUT DSNAME data set
Explanation: The user specified DISP=OLD for a
data set name which was not found in the
catalog.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
CZAEA012 CANCELLED:
DEVICE
TOO MANY DDEFS AGAINST THIS
Explanation: The maximum of fifteen DDEF
cOIrmands may be issued against a particular
device.
Filter Code: WSA
Conversational Action
User: Releases any unneeded DDEF conmands.
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
CZAEA014 CANCELLED:
DEVICE TYPE type INVALID
Explanation: One of the following incorrect
conditions exists in the unit operand:
(1)
TA is not followed by 7, 7DC, or 9; (2) DA
is not followed by 2311, 2302, or 2314; or
(3) a unit record device is specified with
dsorg other than MS or RX.
General Messages
243
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Actiol1
User:
N/A
System: Continues processing.
Reference Data (Also see AFpendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
CZAEA015 CANCELLED:
SPACE TYPE type INVALID
Explanation: The space type must be 'l'RK, CYL,
or a decimal number between 1 and 32167.
Filter Code: WSA
Conversational Action
Oser:
N/A
System: Awaits next command.
Nonconversational2lction
User:
N/A
System: Continues Frocessing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by:
CZAEA
CZAEA016 CANCELLED:
INVALID
PRIMARY ALLOCATION number
Explanation: Primary allocation must be a
one-to-three digit decimal number.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversati_ona.J.__ ~,,!J.~1l
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
CZAEA017 CANCELLED:
INVALID
SECONDARY ALLOCATION number
Explanation:
Seconda:ry allocation must be a
one-to-three digit decimal number.
Filter Code: WSA
Conversational Action
User: N/A
System:
Awaits next command.
Nonconversational Action
User:
N/A
System:
Continues processing.
Reference Data (Also see l\.l::pendix B-1.2.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
CZAEA018 CANCELLED:
VOLUME OPTION value INVALID
Explanat.ion: The volume value must be PR.IVATE,
PUBLIC, or a one-to-four digit volume
sequence number.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Re:terence Data (Also see AFpendix B-12.)
244
Requirement determined by:
variable data supplied by:
CZAEA019 CANCELLED:
CZAEA
CZAEA
SPACE VALUE value INVALID
Explanation: The only valid value for space is
HOLD.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
CZAEA
Variable data supplied by:
CZAEA
CZAEA01A CANCELLED:
INVALID
VOLUME SERIAL NUMBER number
Explanation: The volume serial number must be
specified as one-to-six alphameric
characters.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System:
Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
CZAEA
Variable data supplied by: CZAEA
CZAE.M1B CANCELLED:
INVALID
FILE SEQUENCE NUMBER number
Explanation: The file sequence number must be
specified as a decimal number no higher than
9999.
Filter Code: WSA
co_nversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System! continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
CZAEA01C CANCELLED:
LABEL TYPE INVALID
Explanation: Valid label type codes are AL
(ASCII-labeled), AUL (ASCII - user-labeled).
Filter Code: WSA
Conversational Action
User: N/A
system: Awaits next command.
Nonconversational Action
User: N/A
system: Continues processing.
Reference Data (Also see Appendix B-12.)
.
Requirement determined by: CZAEA
Variable data supplied by:
N/A
CZAEA01D CANCELLED:
INVALID
RETENTION PERIOD number
Explanation: Days for retention must be
specified as a four-digit decimal number.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variatle data supplied by: CZAEA
the system.
Filter Code: WSA
Conversational Action
User: N/A
system: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
CZAEA022 CANCELLED:
CZAEA01E CANCELLED:
EXplanation: Valid DISP codes are OLD, NEW, or
MOD.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
CZAEAOIF CANCELLED: DSNAME data set name.
DISP=MOD NOT ACCEPTABLE TO VAM
data definition name.
Explanation: Valid data set organization
values are: MS (MSAM), PS (physical
sequential), RX (IOREQ), VI (virtual
indexed), or VS (virtual se~uential).
Filter Code: WSA
Conversational Action
User; N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
CZAEA023 CANCELLED:
MISSING
Explanation: The user specified VAM
organization, and also specified DISP=MOD
(an addition to an already existing data
set). The two options are incompatible.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Abnorrrally terminates the task.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
CZAEA020 CANCELLED:
RES ERVED DDNAME.
DSORG value INVALID
DISP VALUE value INVALID
SYSTEM
Explanation: The user specified a data
definition name which is prefixed by $$$,
SYS, or LPCi these prefixes are reserved for
system use.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
Explanation: In the SPACE parameter, the sface
type was not defaulted to pages, so primary
allocation is required.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
CZAEA024 CANCELLED:
EXplanation: The user defined the data set
name of a system data set (SYS- or LPC-),
but does not have the proper authority to
change the data definition name defined by
UNIT VALUE value INVALID
Explanation: In the unit operand, the second
element is not DA, TA, PR, RD, PC, or SDA (a
four-digit hexadecimal number).
Filter Code: WSA
Conversational Action
User: N/A
system: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
CZAEA025
CZAEA021 CANCELLED: CANNOT CHANGE DDNAME ON
SYSTEM DATA SET data set name
PRIMARY ALLOCATION VALUE
~~CELLED:
DSNAME MISSING
Explanation: The user issued a DDEF command
with no data set name.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Ncnconversational Action
General Messages
245
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by:
N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
CZAEA02B CANCELLED:
CZAEA026 CANCELLED:
UNIT VALUE value INVALID
Explanation: The user specified an invalid
unit value. Valid values are DA (direct
access), TA (tape access), PC (punch>, PR
(printer), or RD (reader).
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Feference Data (Also see Appendix B-12.)
Requirement determined by:
CZAEA
Variable data supplied by: CZAEA
Explanation:
In the DCB sub-parameter list,
the element following the keyword is not in
the list of valid entries, or does not meet
specifications.
Filter Code: WSA
Conversational Action
User: N/A
System:
Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable dat.a supplied by: CZAEA
CZAEA02C CANCELLED:
CZAEA027 CZNCELLED: VOLUME SEQUENCE NUMBER
EXCEEDS NUMBER OF VOLUMES
EXFlanation: The user specified a smaller
number of volumes than the number specified
as a volume sequence number.
Filter Code: WSA
Conversational Action
User:
N/A
SystPJlI! Await.s next command.
Nonccnversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
CZAEA028 CANCELLED:
INVALID
VOLUME SEQUENCE NUMBER number
Exp1anation:
The volume sequence number must
be a one-to-four digit decimal number.
.Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see AFpendix B-12.)
Require:ment determined by:
CZAEA
Variable data supplied by: CZAEA
CZAEA029 CANCELLED:
DDNAME data definition name
IN DCB I'AAAMETER INVALID
Explanation: The data definition nan,e (ddname)
in the DCB parameter is not one-to-eight
alphameric characters with the first
character alphabitic, prefixed with an
asterisk.
Filter Code:
WSA
~onversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
systerr: Cont.i nues rrocessing.
246
DCB VALUE value INVALID
INVALID OS/360 DSNAME
ExplanatioIl: The user entered an OS/360 data
set nalf,e which did nOl:. meet OS/360
specifications.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversaticnal Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by:
N/A
CZAEA02D CANCELLED: USERID userid NOT JOINED;
SHARED DATA SET NOT IN SYSTEM
Explanation: The defined data sets name's user
ID was not found in the user's catalog.
Filter Code: WSA
Conversational Action
User: N/A
SysteIT': Awaits next command •
Ncnconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by:
CZAEA
CZAEA02E CANCELLED:
RET VALUE value INVALID
Explanation: Valid RET values are listed
below.
The user is cautioned that they may
be specified in any combination and will be
~rocessed in the order specified by the
user. C (delete at close), L data set
organization or an old disposition.
Filter Code: WSA
Conversational Action
User: N/A
System:
Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by:
N/A
CZAEA040 CANCELLED:
TAPE DATA SET
FILE SEQUENCE VALID ONLY FOR
Explanation: The user issued a data set nan:e
file sequence number in the LAEEL operand,
but did not specify the unit as tape.
Filter Code:
WSA
Conversational Action
Oser:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
system: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
CZAEA041 CANCELLED:
VOLUME volume CANNOT BE FOUND
Explanation: The volume with the
user-specified data set name could not be
found.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
CZAEA042 CANCELLED:
CONCATENATION
VOLUME=PRIVATE VALID ONLY FOR
Explanation: The user specified VOLUME=PRIVATE
for a data set that was in the catalog and
not a scratch volume. VOLUME=PRIVATE lI'ay l:e
specified for a scratch volume in a data set
that is not in the catalog.
Serial numbers
may be specified for uncataloged data sets
also. Volume information is not needed for
old data sets.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by:
N/A
CZAEA046 CANCELLED:
DSORG IN CATALOG
DSORG IN DCB DOES NOT MATCH
Explanation: The user specified a data control
block that is not consistent with the
catalog data set organization.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Ncnconversational Action
User: N/A
Systerr.: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Varial:,le data supplied by: N/A
DATA SET MUST BE OLD FOR
Explanation: The user attempted to concatenate
a data set without specifyinq the
disposition as old.
Filter Code: WSA
Conversational Action
User:
N/A
system: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processin'J'
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variatle data supplied by: N/A
CZAEA044 CANCELLED:
CONCA'I'ENATION
CZAEA045 CANCELLED:
NEW DATA SET
CZAEA
N/A
DDNAME UNKNOWN FOR
Explanation: The user-specified data
definition name was not found in the Task
Data Definition Table for concatenation.
Filter Code: WSA
Conversational Action
User: N/A
system: Awaits next corrmand.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied :Cy: N/A
CZAEA043 CANCELLED:
CONCATENATION
Requirement determined by:
Variable data supplied by:
CZAEA047 CANCELLED:
OS/360 DATA SET
UNIT SPECIFIED IS INVALID FOR
Explanation: The user specified an OS/360 data
set that is not on tape (TA) or direct
access COA).
Filter Code: WSA
Ccnversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
SystelT,: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
UNIT MUST BE 'r,1I OR DA FOR
Explanation: The user specified OPTION = CONC
for a unit other than tape (TA) or direct
access (DA).
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.,
Nonconversational Action
User: N/A
System: continues processin9.
Reference Data (Also see Appendlx B-12.)
CZAEA048 CANCELLED:
OS/360 I;ATA SET
DSORG SPECIFIED INVALID FOR
Explanation: The user specified a data set
with an organization other than a sequential
access method.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
General Messages
249
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
CZAEA049 CANCELLED:
OS/360 DATA SET
OPTION
PARA~ETER
INVALID FOR
Explanation:
The user specified a data set
that is either concatenated or a job
library.
Filter Code: WSA
Conversational Action
User: N/A
System:
Awaits next command.
Nonconversational Action
User:
N/A
System:
Continues processing.
Reference Data (Also see AFFendix B-12.)
Requirement determined by: CZAEA
Variable data sUFFlied by: N/A
CZAEA04A CANCELLED: ONLY ONE VOLUME MAY BE
SPECIFIED BY SY~BOLIC DEVICE ADDRESS
Explanation:
The user requested more than one
symbolic device volume at the same time.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next cOIT~and.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix £-12.)
Requirement determined by: CZAEA
Variable data supplied Lt:
N/A
CZAEA04B CANCELLED:
PARAMETER STRING
ILLEGAL DELIMITER IN
Explanation: The user either has a delimiter
following an equal sign, or an equal sign is
not preceded by a keyword.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next corr~and.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by:
N/A
CZAEA04C CANCELLEL:
element
ILLEGAL PARENTHESES .AF'l'ER
Explanation:
The user issued a data set
parameter string without a left parenthesis.
Filter Code:
WSA
Conversational Action
User: N/A
System:
Await.s next command.
~on~nversational Action
User:
N/A
System:
continues processing.
Reference Data {Also see Appendix B-12.}
Requirement determined ty:
CZAEA
Variable data sUFplied by: CZAEA
250
CZAEA04D CANCElLED:
MOUNTKC
YOUR VOLUME(S) CANNOT BE
Explanation:
The user's data set volume
mounting routine could not be successfully
completed.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System:
continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by:
N/A
CZAEA04E CANCELLED:
YOUR DATA SET
SPECIFIED DEVICE INVALID FOR
Explanation: The user's volume mounting
routine found an inconsistency between the
device types requested.
Filter Code: WSA
Conversational Action
User: N/A
Systew:
Awaits next command.
Nonconversational Action
User: N/A
System:
Continues processing.
Reference Data (Also see Appendix £-12.)
Keguirement determined by:
CZAEA
Variable data supplied by:
N/A
CZAEA04F CANCELLED:
WITHOUT A DELIMITER
MORE THAN 256 CHARACTERS
Explanation: rDEF command requires valid
length field and proper delirriters.
Filter Code:
WSA
Conversational Action
User:
N/A
System: Awai ts next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix £-12.)
Requirement determined by:
CZAEA
Variable data supplied by:
N/A
CZAEA050 CANCELLED:
value
ILLEGAL PARENTHESIS BEFORE
Explanation:
The user has put two left
parentheses in the same operand.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Actio!}
User: N/A
System:
Continues processing.
Reference Data (Also see Appendix £-12.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
CZAEA051 CANCELLED:
operand
ILLEGAL DELIMITER AFTER
Explanation: The user has an illegal delimiter
in a data set operand. The proper operand
format is keyword, equal sign, element, and
equal sign.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Af:pendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
CZAEA056 CANCELLED:
VOLUME
CZAEA052 CANCELLED:
,PARAMETER STRING
ILLEGAL PARENTHESES IN
Explanation: The user has not kept parentheses
pairs consistent. The propt,r usage of
parentheses is a left paren1:hesis paired
with a right parenthesis. If the first
element in an operand is defaulted it is
preceded by a left parenthesis.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
CZAEA053 CANCELLED:
DATA SET
UNAUTHORIZED TO SHARE THIS
Explanation: The user is not authorized to
share the specified data set.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next commano.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by:
N/A
CZAEA054 CANCELLED: DEVICE REQUESTED NOT
ALLOCATED BY SECURE COMMAND
Explanation: The device requested is issued to
batch users only. The user must issue a
Sl:.CURE cOiErrand for the desired device.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Af:pendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
CZAEA055 CANCELLED:
DATA SET
LABEL ERROR ON REQUESTED
NO SPACE AVAILABLE FOR THIS
Explanation: This user's attempt to allocate
space for this data set failed.
Explanation: The user's attempt to mount a
volume failed due to a volume label error.
Filter Code: WSA
Ccnversational Action
User: N/A
System: Awaits next comrr,and.
Ncnconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
CZAEA057 CANCELLED:
DDNAME ddnarne NOT UNIQUE
Explanation: The user-specified data
definition name is already in the Task Data
Definition Table. If the user's data set
narre is unique, concatenation was not
specified.
Filter Code: WSA
Conversational Action
User: N/A
Systerr.: Awaits next cOIllffiand.
Noncollversational Action
USEr: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
CZAEA058 CANCELLED:
WITH DSORG
VOLUME FORMAT INCONSISTENT
Explanation: The user atten.pted to allocate
space on a volume with a data set format
that does not rratch the specified data set
organization.
Filter Code: WSA
'Conversational Action
User: N/A
System: Awaits next cOIDmand.
Ncnconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
CZAEA059 CANCELLED:
SPECIFIEr VOLUME
DSNAME NOT UNIQUE ON
Explanation: The user issued a data set nane
that already exists on the specified volume.
Filter Code: WSA
conversatIOnal Action
User: N/A
General Messages
251
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see AFFendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
System: Continues processing.
Referenoe Data (Also see Appendix B-12.)
Requirement determined by: CZAEA
Variable data supplied by:
CZAEA
CZAEA064 PROCEEDING:
CATALOGED DATA SET
CZAEA060 PROCEEDING: VOLUME SEQUENCE NUMBER
IGNORED FOR VAM DATA SET
~lanation:
The user entered a volume
sequence number for a dat.a set organization
other t.han a virtual access method.
~ i..LtLL Code:
lSi'"
Conversational Action
User: N/A
System:
Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by' CZAEA
Variable data supplied by:
N/A
Explanation:
Although the user specified the
label parameter, label information was taken
fron the catalog entry.
Filter Code:
ISA
Conversational Action
User:
N/A .-----System: Awaits next oommand.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
CZAEA
Variable data supplied by: N/A
CZAEA065 CANCEI.LED:
UNIT
CZAEA061 PROCEEDING:
CATALOGED DATA SEr
DEVICE TYPE NOT APPLICABLE TO
SPACE PARAMETER IGNORED FOR
Although the user specified the
device t.ype. device information was taken
from the catalog entry.
Filter Code: WSA
Conversational. Action
User:
N/A
System:
Awaits next cOMuand~
Nonconversational Action
User: N/A
System:
Continues processing.
Reference Data (Also see Appendix B-12.)
Requiren,ent determined by:
CZAEA
Variable data supplied by: N/A
K~anation:
Explanation: 'I'he user specified the space
paramet.er when space information was already
cataloged.
Filter Code:
ISA
Conversationa l Act.ion
User: N/A
System:
Awaits next corrmand.
Nonconversational Action
User:
N/A
System: continues processing.
f:E data set narre
General Messages
253
System: Awaits next command.
Nonconversational Action
User: N/A
systeu: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement d~errnined by: CZAEA
Variable data supplied by: CZAEA
Explanation: The BUFOFF parameter
specification is incorrect for the
particular t.ype of data set:.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System:
continues procesGing.
Reference Data (Also see AI'pendix B-12.)
Require~ent determined by:
CZAEA
Variable data supplied by: CZAEA
CZAEA078 CANCELLED: DSNAME data set name.
TYPE INVALID FOR ASCII REQUEST
EXFlanation:
CZAEA07C CANCELLED:
INVALID
P.UL,
LABEL
or NL.
:£o"i Iter Code: ;;SA
conversational Action
User: N/A
System: Awaits next command.
Nonconve.rsaticnal As::t.ion
User:
N/j,
System: Continues processing.
Reference Data (Also see AFpendix B-12.)
Requirement determined by: CZAEA
Var'iable data supplied by: CZAEA
CZAEA079 CANCELLED:
TYPE INVALID
DSNAME data set name. LABEL
Explanation: Valid ASCII tare options are:
AL
(ASCII-labeled), lIUL (user-labeled in ASCII
format), and NL (unlabeled).
l"i 1 ter Code: "SA
Conversational Act.ion
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
Sy,;t.eln:
continues proces"ing.
)le£erence Dat.a (Also see Appendix B-12.)
Requi refllL'nt determined l:;y: CZAEA
Variable data supplied ty: CZAEA
CZAEA07A PROCEEDING:
IGNORED
D,sNAME J.ata set. name. BUFOFF
JlX..£lanat:ion: 'i'he value given for the BUFOFF
parameter has been ignored.
£i Iter Co{~: WSA
Conversational Action
User:
N/A
:3ysterr: Awaits next CO!llIfdnd.
Nonconversational Action
User:
N/A
Szstem: Continues processing.
l
Requirement determined by: CZAEG
Variable data supplied by: N/A
CZAEG500 CANCELLED: LRECL INVALID
Explanation: The user-specified record length
(LRECL) value is invalid.
Filter Code: WSA
Conversational Action
User: N/l\
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEG
Variable data supplied by: N/A
CZAEG600 CANCELLED: KEYLEN INVALID
Explanation: The user-specified key length
(KEYLEN) value is invalid.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next corr.mand.
Nonconversational Action
User: N/A
System: Continues processing.
Heference Data (Also see Appendix B-12.)
Requirement determined by: CZAEG
Variable data supplied by: N/A
CZAEG700 CANCELLED: RKP INVALID
Explanation: The user-specified key
displacement (RKP) value is invalid.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.>
Requirement determined by: CZAEG
Variable data supplied by: N/A
CZAEG800 CANCELLED: DSNAME NOT UNIQUE
Explanation: The user-specified data set name
is already in use.
:kilter Code: WSA
Conversational Action
User: N/A
System: Awaits next corr.mand.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEG
Variable data supplied by: N/A
CZAEG900 CANCELLED: FTN OPTION INVALID. NUST BE Y
OR N
Explanation: The user specified a value for
the FORTRAN OPTION pararreter other than the
valid Y or N entry.
256
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
system: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEG
Variable data supplied by: N/A
CZAEJ021 PROCEEDING: data set name IGNORED.
Explanation: The volume is not mounted due to
system fault or operational difficulty.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.>
Requirement determined by: CZAEJ
Variable data supplied by: CZAEJ
CZAEKOOl CANCELLED: NO JOBLIBS ASSIGNED
Explanation: A JOBLIB has not been defined,
and thus none exists in the JOBLIB JFCB
chain.
Filter Code: WSA
Ccnversational Action
User: N/A
System: Command canceled.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEK
Variable data supplied by: CZAEK
CZAEK002 CANCELLED: DDNAME NOT IN JOBLIB CHAIN
Explanation: To obtain valid ~DNAMES use the
DDNAME? command.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEK
Variable data supplied by:
N/A
CZAER003 JOBIIB CHAIN RE-ORDERED.
NO DCB
FOUN~
Explanation: To re-order JOBLIB structure, the
JFCB and loader's DCB chains must be
changed. A JFCB was found, but no DCB.
Only the JFCB chain was reordered.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by:
Variable data supplied by:
CZAEI<
CZAEI<
CZAEK004 CANCELLED: INVALID OR MISSING PARAMETER
Explanation: The user has omitted a required
parameter or has supplied an invalid option.
The command format Should be checked.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEK
Variable data supplied by: N/A
CZAEMlOO CANCELLED:
NO DATA SET NAME ENTERED
Explanation: When you issue the LINE? command
you must specify the data set name of the
data set to be displayed.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEM
Variable data supplied by: N/A
CZAEMlOl CANCELLED:
DATA SET NOT YOURS TO SEE
Explanation: The prefixed userid is not
identical to the userid in task common;
therefore you are not permitted to see the
requested data set.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEM
Variable data supplied by: N/A
CZAEMI02 CANCELLED:
LAST LINE OF DATA SET FOLLOWS
Explanation: The last line that you specified
is beyond the end of the data set.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEM
Variable data supplied by: N/A
CZAEMl04 PROCEEDING: LINE line number DOES NOT
EXIST.
NEXT LINE(S) PRESENTED
Explanation: The line (or lines) that you
specified do not exist in the data set.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEM
Variable data supplied by: CZAEM
CZAEMI05 CANCELLED:
NOT A LIST DATA SET
Explanation: The format specified in the data
control block (DCB) for this data set is not
consistent with a list data set.
Filter Code: WSA
Ccnversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEM
Variable data supplied by: N/A
CZAEM200 CANCELLED:
INVALID DATA SET NAME
Explanation: A data set name consists of one
or more simple names having 1-8 alphameric
characters, the first alphabetic.
Filter Code: WSA
Ccnversational Action
User: N/A
System: A~aits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEM
Variable data supplied by: N/A
CZAEM201 END OF MEMBER OR DATA SET
Explanation: The range you specified includes
the last line of this data set or member.
Filter Code: ISA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEM
Variable data supplied by: N/A
CZAEM202 CANCELLED:
REQUIRED
ILLEGAL DELIMITER - COMMA
Explanation: A comma must separate the data
set name from the line number{s). If you
are specifying a range (pair) of line
nurrbers, you must insert a comma betweem
them.
Filter Code: WSA
Conversational Action
User: N/A
General Messages
257
System: Awaits next command.
Nonconversational ~ction
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEM
Variable data supplied by: N/A
CZAEM300 CANCELLED:
DATA SET NAME UNKNOWN
EXplanation: The data set name you specified
(DSNAME-data set name) has a valid syntax,
but the data set cannot be found.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEM
Variable data supplied by: N/A
CZAEM400 CANCELLED:
DATA SET NAME NOT UNIQUE
Explanation: The JFCB (job file control block)
found, but the userid prefixed is not
identical to the userid in task common.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEM
Variable data supplied by: N/A
CZAEM500 CANCEJ,LED:
PARTITIONED DATA SET
Explanation: The data set is partitioned, so
you must specify a member name.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEM
Variable data supplied by: N/A
CZAEM600 CANCELLED:
NOT A LINE DATA SET
Explanation: A line data set has a record
format (RECFM) of V, a relative key position
(RKP) of 4, a key length (KEYLEN) of 7, and
a record length (LRECL) of 132.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEM
Variable data supplied by: N/A
258
CZAEM700 CANCELLED:
MEMBER NOT FOUND
Explanation: The member of the partitioned
data set that you specified cannot be found.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEM
Variable data supplied by: N/A
CZAEM800 PROCEEDING:
LINE line number INVALID
Explanation: Valid line numbers consist of one
to seven digit decimal numbers.
Filter Code: WSA
Conversational Action
User: N/A
system: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEM
Variable data supplied by: CZAEM
CZAEM801 TERMINATED:
RIGHT PARENTHESIS MISSING
Explanation: There is no right parenthesis to
end the range of lines.
Filter Code: WSA
Ccnversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing_
Reference Data (Also see Appendix B-12.)
Requirement determined by:
CZAEM
Variable data supplied by: N/A
CZAEM900 PROCEEDING:
Nl GREATER THAN N2
Explanation: The last line number (n2) must be
greater than the first line number (nl).
Filter Code: WSA
Conversational Action
User: N/A
system: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAEM
Variable data supplied by: N/A
CZAEM901 TERMINATED:
MINOR SOFTWARE ERROR
Explanation: LINE? command proceSSing cannot
complete successfully.
Filter Code: TAA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
page of GC28-2037-7, Issued February 1, 1972 by TNL GN28-3209
Refezence Data (Also see Appendix B-12.l
Requirement determined by:
CZAEM
Va:dable data supplied by: N/A
CZAENOOA CANCELLED:
SYSTEM FAULT (CZAENOOA)
Explanation: A system error condition has been
encountered.
Fil~er Code:
WSA
Conversational Action
User:
N/A
System:
Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
CZAEN
Variable data supplied by: N/A
CZAENOOl CANCELLED: DATA SET NOT CATALOGED.
Explanation: PINDDS could not find the data
set in the catalog.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Beference Data (Also see Appendix B-12.)
Requirement determined by:
CZAEN
CZAEN002 CANCELLED: DSNAME INVALID FORM
EJ{.!2.!.~!!ation:
FINDOS found the data set name
missing, too long, or invalid.
[,') Iter Code:
WSA
onve:t·sat.ional Ac·tion
User:
N/A
Syst.em:
Awaits next cOmll1and.
t;nconver~ational Action
th;er:
N/A
System:
C·m.tinue!o processinq.
!<-_~l'_,,:t;~!'lCE:pat:
Requirement determined by: CZAFK
Variable data supplied by: N/A
CZAFK910 WRITE ERROR ON REJOIN COMMAND.
TABLE UNCHANGED
USER
Explanation: There was no entry in the User
Table for the user to be rejoined.
Filter code: WSA
Conversational Action
User: Attempts REJOIN again.
System: Awaits next command.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-1~.)
Requirement determined by: CZAF:K
Variable data supplied by: N/A
CZAF:K920 CANCELLED: INDIVIDUAL CATALOG ENTRY NOT
CREATED
Explanation: An error has occurred during
catalog processing.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFK
Variable data supplied by: N/A
CZAFK940 CANCELLED: USER CATALOG ENTRY ALREADY
EXISTS
ExPlanation: The individual catalog entry was
not created because one already exists.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
system: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFK
Variable data supplied by: N/A
CZAFLOOO CANCELLED: COMMAND NOT AVAILABLE TO YOUR
PRIVILEGE CLASS
Explanation: Your privilege is not B
(administrator) or F (system manager).
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command
Nonconversational Action
User: N/A
System: Continues processing
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFL
Variable data supplied by: N/A
CZAFL100 CANCELLED: USERID userid UNKNOWN
EXplanation: The specified userid has not been
joined to the system.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFL
Variable data supplied by: CZAFL
Explanation: Locate found no S-blocks.
Filter Code: WSA
Conversational Action
User: N/A
System: Command is canceled.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFL
Variable data supplied by: N/A
CZAFL505 PROCEEDING: DDEF FAILED TO CREATE JFCB
FOR USERCAT. DELVA~ BYPASSED
CZAFL250 PROCEEDING: DEVICE TYPE INVALID OR
MISSING. type ASSUMED
Explanation: An error occurred in the device
type in the copy option. The system default
value was assigned.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFL
Variable data supplied by: CZAFL
CZAFL400 PROCEEDING: data set name IN USE.
SET NOT ERASED
DATA
Explanation: The user has BULK I/O pending on
a data set. The user will not be QUIT.
Filer Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFL
Variable data supplied by: CZAFL
CZAFL410 BULK I/O PENDING ON DATA SET. USER WILL
NOT BE QUIT.
Explanation: The user is still jOined, as one
or more data sets have bulk I/O pending. If
any data set in the owner's catalog is a
call from bulk I/O, it is bypassed. When
all data sets have been processed and the
indicator for bulk I/O pending is on, the
user will not be removed from the user
table, and bulk I/O pending data sets will
remain in his catalog.
Filter Code: WRA
Conversational Action
User:
N/A
System: Awaits next cOHmand.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFL
Variable data supplied by: CZAFL
CZAFL500 TERMINATED: SYSTEM FAULT
Explanation: The usercat for the user being
quit cannot be erased.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFL
Variable data supplied by: N/A
CZAFL501 PROCEEDING: SYSSVCT ENTRY NOT
FOUND. DELVAM BYPASSED
Explanation: The usercat for the user being
quit cannot be erased.
Fi.l.ter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFL
Variable data supplied by: N/A
CZAFL508 TERMINATED: SYSSVCT ENTRY NOT DELETED.
SYSUSE ENTRY DELETION BYPASSED
Explanation: The SYSSVCT entry in the user
table is normally removed by DELREC. A
SYNAD exit from DELREC has occurred, and the
SYSSVCT entry has not been deleted.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFL
Variable data supplied by: N/A
CZAFL509 PROCEEDING: INDIVIDUAL USER CATALOG NOT
DELETED BY DELVAM
Explanation: The usercat for the user being
quit cannot be erased.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
General Messages
265
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFL
Variable data supplied by: N/A
FIND}
CZAFL510 { STOW UNSUCCESSFUL. USER DELETED FROM
TABLE
EXplanation: FIND or STOW could not complete
their function. The user is still in POD.
Filter Code: WSA
Conversational Action
User: N/A
System: processing continues.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFL
Variable data supplied by: CZAFL
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFL
Variable data supplied by: CZAFL
CZAFL550 PROCEEDING: RELEASE FOR DDNAME ddname
FAILED
Explanation: The JFCB of a new data set was
not released. The data set has been
bypassed.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing of next data set
continues.
Nonconversational Action
User: N/A
System: Processinq continues.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFL
Variable data supplied by: CZAFL
CZAFL560 PROCEEDING: RELEASE FOR DDNAME ddname
FAILED
CZAFL520 PROCEEDING: SYSTEM FAULT. data set name
BYPASSED (CZAFL520)
Explanation: FINDDS did not find the data set.
It will be bypassed and deleted at the end
of the QUIT process.
Filter Code: WSA
Conversational Action
User: N/A
System: The data set is bypassed.
Processing continues.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFL
Variable data supplied by: CZAFL
Explanation: The JFCB of an old data set was
not releas ed. The data set has been
bypassed.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing of next data set
continues.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFL
Variable data supplied by: CZAFL
CZAFL570 dsname NOT CATALOGED--RESPOND
CZAFL530 PROCEEDING: SYSTEM FAULT
Explanation: DSORG is not 01-06. The data set
will be bypassed and deleted at the end of
QUIT.
Filter Code: WSA
Conversational Action
User: N/A
System: Data set is bypassed. processing
continues.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFL
Variable data supplied by: N/A
CZAFL540 PROCEEDING: COPY dsname FAILED. CATALOG
ENTRY DELETED
Explanation: The data set was not copied
because vv returned a code not equal to B.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: N/A
266
Explanation: A nonzero return code was
returned by RECATALOG. The valid responses
are:
Y (retry cataloging)
N (continue)
Filter Code: XSA
Conversational Action
User: You may enter Y (retry) or N (proceed
to next data set).
System: Processing continues.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFL
Variable data supplied by: CZAFL
CZAFL575 COMPLETED:
SETS
USERID userid HAS NO DATA
Explanation: LOCATE found no catalog entries
for this user.
Filter Code: WSA
Conversational Action
User: N/A
system: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFL
Variable data supplied by: CZAFL
CZAFL580 PROCEEDING: SYSTEM FAULT
Explanation: An invalid return code was
received from MSGWR. Valid return codes are
0, 4, or 8.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined.by: CZAFL
Variable data supplied by: N/A
xxxx - batch sequence number, four-digit
decimal number.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data
Requirement determined by: CZAFM
Variable data supplied by: CZAFM
Message residence: CZAFM
Message issued by: CZAFM
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
and System Log
Transmittal technique: WTL Macro
CZAFM LOGON AT hh:mm TASKID=nnnn SDA=yyyy
CZAFL590 PROCEEDING: ERASE data set name FAILED.
RETURN CODE=code
Explanation: The ERASE return code was neither
00 (no error) nor 64 (BULK I/O pending on
the data set). The actual code is printed,
and the data set is bypassed. The catalog
entry will be removed at the end of the QUIT
command process.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFL
Variable data supplied by: CZAFL
CZAFL592 PROCEEDING: DATA SET data set name ON
TAPE AND IGNORED
Explanation: The data set is on tape and
cannot be erased.
Filter Code: WSA
Conversational Action
User: Enters next option and parameters, if
using options.
System: Prompts for next data set, if using
options.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFL
Variable data supplied by: CZAFL
CZAFM LOGON AT hh:rnm TASKID=nnnn BSN=xxxx
Explanation: This message will appear every
time a nonconversational task has been
logged on.
hh:rnm - time of day, hours and minutes.
nnnn - task identification number four-digit
hexadecimal number assigned by the
supervisor with a possible range starting at
0001 through FFFF.
Explanation: The message will appear every
time a conversational task has been logged
on.
hh:mm - time of day, hours and minutes.
nnnn - task identification number,
four-digit hexadecimal number assigned by
the supervisor with a possible range
starting at 0001 through FFFF.
yyyy - symbolic device address of terminal
logged-on. four-digit hexadecimal number.
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: N/A
Reference Data
Requirement determined by: CZAFM
Variable data supplied by: CZAFM
Message residence: CZAFM
Message issued by: CZAFM
Destination
Conversational: operator's Terminal and
System Log
Nonconversational: N/A
Transmittal technique: WTL Macro
CZAFMOOO TSS/360 LEVEL 8.1
Explanation: This is the standard message
issued when LOGON processing has been
initiated.
(LEVEL 8.1 indicates that
Version 8, Modification 1 of TSS is in
effect. )
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFM
Variable data supplied by: N/A
CZAFM100 CANCELLED:
USERID INVALID
General Messages
267
EXplanation: The specified userid is not
recognized by the system. You will have to
issue another LOGON command.
Filter Code: TAA
Conversational Action
User: N/A
System: Awai ts next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFM
Variable data supplied by: N/A
CZAFM200 CANCELLED:
LOGON PARAMETERS MISSING
Explanation: Issue the LOGON command again
with all needed parameters.
(See Part III,
Command System User's Guide GC28-200l.)
Filter Code: TAA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFM
Variable data supplied by: N/A
CZAFM300 CANCELLED:
PASSWORD INVALID
Explanation: The specified password is not
recogni zed.
Filter Code: TAA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFM
Variable data supplied by: N/A
CZAFM301 ENTER PASSWORD
IIJOOIIIR"
Explanation: Enter your current password. The
over-typed field has been printed to obscure
your password.
Filter Code: XSA
Conversational Action
User: Enters password.
System: Awaits response.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFM
Variable data supplied by: N/A
CZAFM302 ENTER PASSWORD
IIJIJIMJIBRR
Explanation: Enter your current password. The
over-typed field has been printed to obscure
your password.
(This message is intended
for teletype users.)
Filter Code: XSA
Conversational Action
268
User: Enters password.
System: Awaits response.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFM
Variable data supplied by: N/A
CZAFM400 CANCELLED:
INCORRECT LOGON SYNTAX
Explanation: You may have neglected to insert
commas for omitted operands.
Filter Code: TAA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFM
Variable data supplied by: N/A
CZAFM500 CANCELLED:
USERID ALREADY LOGGED ON
Explanation: Someone else is currently using
your userid, or the system has not actually
logged you off. For the latter case, ask
the system operator to force your task.
Filter Code: TAA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFM
Variable data supplied by: N/A
CZAFM600 CANCELLED:
USERID HAS BEEN QUIT
Explanation: The user table indicates that the
userid entered has been quit (removed from
the system). The system manager or system
administrator can join you again.
Filter Code: TAA
Conversational Action
User: N/A
System: Awai ts next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFM
Variable data supplied by: N/A
CZAFM601 taskid LOGON AT TIME ON date
Explanation: A TSS user receives a unique task
identification (taskid) at each LOGON.
(This message indicates that LOGON
processing has been successful.)
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFM
Variable data supplied by: CZAFM
CZAFM602 userid RATION EXCEEDED
Explanation: Your ration limit has been
exceeded: when you issue LOGON again,
restrict your resource requirements.
Filter Code: TAA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFM
Variable data supplied by: CZAFM
CZAFM700 PROCEEDING:
24 BIT ADDRESS MODE ASSUMED
Explanation: The third LOGON parameter
indicates the addressing mode to be used
either 24- or 32-bit mode. 24-bit mode has
been assumed.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFM
Variable data supplied by: N/A
CZAFM800 CANCELLED:
ADDRESS SIZE
EITHER SPECIFY 24 OR DEFAULT
Explanation: The default address size is 24
bits on a 24-bit machine, 32 bits on a
32-bi t machine.
Filter Code: TAA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFM
Variable data supplied by: N/A
CZAFM900 TERMINATE TASK: CAN NOT MIX 24 AND 32
BIT TASK IN EXPRESS BATCH STREAM
Explanation: As indicated in the message text,
you cannot mix addressing modes. Use either
24-bit mode or 32-bit mode throughout your
express batch task -- but not both.
Filter Code: TAA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFM
Variable data supplied by: N/A
CZAFM901 CANCELLED:
INVALID
MAXIMUM STORAGE PARAMETER
Explanation: Use from one to five decimal
digits to specify your maximum storage
requirement.
Filter Code: TAA
Conversational Action
User: N/A
system: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFM
Variable data supplied by: N/A
CZAFM902 CANCELLED:
PARAMETER
INVALID CSECT PACKING
Explanation: CSECT packing is specified with a
single character: A - all CSECTs and
PSECTs: P - PSECTs only: 0 - private CSECTs
only: X - all CSECTs, no PSECTs: N - no
packing (N is the default).
Filter Code: TAA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFM
Variable data supplied by: N/A
CZAFM903 TERMINATED:
llVAILABLE
INSUFFICIENT AUX SPACE
Explanation: You have insufficient auxiliary
storage available for your task. Try
logging on again with a reduced maximum
storage request.
Filter Code: WSA
Ccnversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
system: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFM
Variable data supplied by: N/A
CZAFM904 CANCELLED: INVALID XIVM OPTION (NOT Y OR
N, OR ELSE AUTHORITY NOT U)
Explanation: You have entered a value for the
eighth LOGON parameter, XIVM (delete user
IVM) that is either not valid or not
available for your authority class.
Filter Code: TAA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFM
Variable data supplied by: N/A
General Messages
269
CZAFN LOGOFF AT hh:mm TASKID=nnnn BSN=xxxx
Explanation:
This message will appear every
time a non conversational task has been
logged off.
hh:mm - time of day, hours and minutes
nnnn - task identification number,
four-digit hexadecimal number assigned by
the supervisor with a possible range
starting at 0001 through FFFF.
xxxx - batch sequence number, four- digit
decimal number.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User:
N/A
System: Processing continues.
Reference Data
Requirement determined by: CZAFN
variable data supplied by:
CZAFN
Message residence:
CZAFN
Message issued by: CZAFN
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
and System Log
Transmittal technique: WTL Macro
CZAFN LOGOFF AT hh:mm TASKID=nnnn SDA=yyyy
Explanation: This message will appear every
time a conversational task has been logged
off.
hh:mm - time of day, hours and minutes.
nnnn - task identification number,
four-digit hexadecimal number assigned by
the supervisor with a possible range
starting at 0001 through FFFF.
yyyy - symbolic degree address of terminal
logged-off, four-digit hexadecimal number.
Conversational Action
User:
N/A
System:
Processing continues.
Nonconversational Action
User: N/A
System: N/A
Reference Data
Requirement determined by: CZAFN
Variable data supplied by: CZAFN
Message residence: CZAFN
Message issued by:
CZAFN
Destination
Conversational: Operator's Terminal and
Systerr Log
Nonconversational:
N/A
Transmittal technique: WTL Macro
System: Awai ts next command.
Nonconversational Action
User: N/A
system:
Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFN
Variable data supplied by:
N/A
CZAFN810 UNABLE TO RELEASE DEVICES ALLOCATED TO
THIS TASK
Explanation: The RELEASE command processor has
returned an invalid return code, indicating
that the devices allocated to your task
cannot be released.
Filter Code: TAA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFN
Variable data supplied by:
N/A
CZAFN820 ERROR WHILE ATTEMPTING TO CHANGE SCHEDULE
TABLE ENTRY LEVEL
Explanation: An invalid return code has been
received following processing of the CHANGE
macro instruction.
The schedule table entry
level has not been altered.
Filter Code: TAA
Conversational Action
User: N/A
System:
Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFN
Variable data supplied by: N/A
CZAFN830 ERROR WHILE PRINTING SYSOUT DATA SET
Explanation: An invalid return code has been
received following processing of the PRINT
macro instruction.
Filter Code: TAA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
CZAFN
Variable data supplied by:
N/A
CZAFN840 RESOURCE CONTROL ENCOUNTERED MINOR
SOFTWARE ERROR
CZAFN800 NO SYSOUT JFCB IN TASK DATA DEFINITION
TABLE
Explanation: The FINDJFCB routine cannot find
the address of the job file control block
(JFCB) for the SYSOUT data set.
Filter Code:
TAA
Conversational Action
User:
N/A
270
Explanation: An error condition has been
detected by RCR LOGOFF or RCR CLOSE for an
express batch task.
Filter Code: TAA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
page of GC2B-2037-7. Issued February 1, 1972 by TNL GN28-3209
User:
N/A
l~on,conversa t;ional
System:
Cont.inues processinq.
Reference Data (l\lso see Appendix B-12.)
Requirement determined by: CZAFN
Variable data supplied by:
N/A
CZAFUI00
BATCH.
TERMINATED:
Action
Os;c.r:
N/A
System: continues processing.
Refer~nce Data (Also see Appendix B-12.)
Requirement determined by: CZAFV
Varia.ble data supplied by: CZAFV
SECURE INVALID FOR l!:XPRESS
GSERID=userid
CZA1"V020 CANCEI,LED:
E:.::pla!!i~tion:
_~~'~:r:!dt.i.g_T!:
issue a SECURE command.
l"ilter Code:
TSA
conversational Action
User:
N/A
System:
N/A
Nonconversational Action
User:
N/A
System:
ABEND, cc=l.
ReferEnce Data (Also see Appendix £-12.)
Requirement determined by: CZAFU
Variable data supplied by: CZAFLJ
CZAF'U200 CANCELLED:
CZAFV UO
Explanation:
SECURE may be used only to
reserve devices for a background t_ask.
Filter Code:
WSA
fonv~r~nal Action
User:
N/A
System:
Awai t.s next conu:nand.
i'Jonconversational Act ion
~;y":tdn:
The data set will not be copied
because of excessive prompting ..
1"i1 ter Code:
W::'~A
f.on ~.i.r:~at ional_.~gh,Q.~l
User:
N/A
::;yst.em:
Await.s next com.,,'nand.
tl.9A';::Qrr:~~r~tion~l Act:..0..!l
O,;ex:
N/A
~-:y:.:;.t~prn~
c:ontinues processing_
RefE.:m:
N/A
Awa.it~s
next command ..
ligA(~()f!Y§.J::.:3.c:3. 't.:i,. on~1.._~£.0on
:Jr;er:
N/A
S ys-t.em::
Cont.inu(.~s processing '"
CZAFV240 ENTER START LINE OR DEFAULT/NO
RENUMBERING
(Also see Appendix B-12.)
deterrnined by:
CZAFV
(lcita supplied by:
CZAFV
,}:lI:Et,~rlCl!J.c':JI':
The data
,::opy 1.:'; noL correct
set. name given for the
and must be reentered.
E~2.h,'!ndtl-ol}:
I f the increment is specifie1:1.
the base option may not be defaulted.
The
inconsistency may be resolved by entering
Lhe start line number or' defaulting.
No
re-number,'ing will occur.
Filter Code:
XSA
Conversational Action
'--IJser:
Reenters number or defaults.
3ystem:
Awaits next command.
~.9E::gJ!.Y(':Fs'''tiQ..T@J._l'c!...j,on
IL;f::r!
N/?\
data set name.
~.~y!3tem!
':;',er:
Reenters number.
;;;'?stem: Awaits next command.
Nonconversational Action
--User:
N/A
System:
Continues processing.
Referenc~ Data (Also see Appendix B-12.)
Requirement determined by: CZAFV
Variable data supplied by:
CZAFV
j)rocE:ssing continues ..
continues process ing.
(Also see Appendix B-12.)
determined by:
CZA~V
Variable data supplied by:
N/A
'. ySLt.'ffi:
1.!~?!I~)l'.Y!".:.r3...9.t. i qnaJ:.. Ac: t i9_l'2
U,,;pr:
N/A
";y:,;tf;""
N/A
(Also see Appendix B-12.)
determined by:
CZAFV
Vdrianle data supplied by: CZAFV
CZAl"V260 HEI'LACE OPTION value NOT R OR I.
REENTER
~.~f'lanctt.i..9f):
C:GAFil:UH: ,';RAS" OPTION value NOT 'f OR N.
REENTER
Tb", parameter entered for the
·t.o era,,;e the input dat.a set is
.l "";C' 1 i.d"
Ent"?r Y or N.
An improper option for
replacemenT. has been ent,ered.
F.iltex Cod",':
XSA
~QiiYr~1~~yona.Lks_t i (~
lIs~T:
Snters R or I~
':y'.,·I:em:
Await" next command •
:\l2flS;91lvers<,ttional Actioll
U::;er:
N/A
c3ystem:
continues processing.
:~~j!"::,i.:t:!ri:
ggfel",-(:E~_~_..Qata.
R~~qllirement
Await,s ;--u?xt command ..
(Also see Appendix B-12.)
determined by:
CZAFV
Variable data supplied by: CZAFV
~ ~ _'~2-~~1 ~_~2_!}_:-~ ~~ !~§~ !i~? n i!l: __1l~~~_J:52!!
processing ..
(Also see Appendix 8-12.)
ny:
CZAI'Y
\],\.ti ,U.e ji'it.i1 snpplied by:
CZAf'V
r::j/;::t:t:--CU:'
t.'o:.:..::nt.inues
CZAf'V280 HEPLACE OPTION IGNORED -
RENUMBERING
SPECIFI.ED
.]';?92tcl1!,~~t.ion:
.!\i'V)()(; "1\,;[: I)PTION val.ue INVALID.
Li.N
NtfJ:.1HEH
REEN'l'ER START
Renumbering ann replacement are
mutually exclusive.
Renumbering is assumed,
in this case, to be the user's wish.
Ei1t,.~..E_(~9..Q~:
The t,;lse option specified is not
nnrntler.
The opt ion Illust be
lS}I,
Can v!"..:..E.§<:lJ:':\'2pd 1 •.1.\cti,on
(hoer:
N/A
';y,,;t.em:
Awa its next command.
~QI~:"'::.'lI~LQr s9..!::. i ona 1.J\sti or!
lJS~,r
,;/31.:<,1";
:
~-; jt)te.w::
option ..
Await:'; next, command.
N/A
Cont.i. nue;::.~ p.r:-ocessing ..
Reference Data (Also sec Appendix fl-12.)
-.- f<"c' quir (;ment det,exmined
~'~_'-::D_(~_{2g_~~:.!~~~li.2rJ.9-J~Action
iJ3(~r
Nl'A
by:
Variable data :.>upplied by:
CZAE'V
N/A
f7·':!~-;-tem'.:
Cont.inues processing ...
{Also see Appendix B-12.)
deteLrnined by:
CZAFV
V;"y 'J,ble ddtd suppliE'd by:
CZAFV
CZAFV300 DSNAME data set naIDe NOT CATALOGED ot{
DEFINED BY DDEF.
REENTER DSNAME
g.!.EJo~.nation:
Clf\"\!22()
INCVEMENT OPTION value
INVAI,ID.
REEN'fER
The specified data set namfe could
not be found in t.he catalo,] or the .JFCB
chain.
An inval.id incrementation number
sp0cified.
'The number must be a
dE!cimal number not exceeding 999.
XSA
Filter Code:
XSA
~C!.rr",:e rsationaJ_~~i2.!.l
User:
Reen"t.E'rs the data set narnE'.
S-ystJ?m:
Awaits next command ..
Nonco!l.:vgrY;d ti~2-n~.L~ctj,.qD
Page of GC28-2037-7, Issued February 1, 1972 by TNL GN28-3209
User:
system:
Refen~nce
N/A
continues processing.
Dated (Also see Appendix B-12.)
---.Requirement determined by:
Variable data supplied by:
C ZAFV
CZAFV
_g.?'l~Lal}.'i!:~)n:
flser:
N/A
:3ystem';
Await,; next command •
.!'l0Jlc.on_v_E!L~a
C'f.A}V 320 CANCELLED:
VIIM
data set name 1.3 NOT [;A..'1 on
The sI-J2citied data set does not
,--ave the correct orqanizat.ioD.
filter Code:
WSA
c(Jnversat:fonal !'I£!J.9.~
tlonal Action
User: N/A
system: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFV
Variable data supplied by: CZAFV
Requirement determined by:
Variable data supplied by:
CZAFV
CZAFV
CZAFV420 data set namel IMPLIES MEMBER
PROCESSING,DSNAME2 DOES NOT. REENTER DSNAMEl
CZAFV340 CANCELLED: data set name NOT TAPE OR
DIRECT ACCESS DEVICE
Explanation: The specified data set is in
sequential organization, but is not on tape
or a direct access device.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next cOlI'.mand.
NonconversationalAction
User: N/A
System: continues processin~J.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFV
Variable data supplied by: CZAFV
Explanation: DSNAME2 does not indicate member
processing is possible, but the DSNAMEl
entered, as specified, implies member
processing.
Filter Code: XSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFV
Variable data supplied by: CZAFV
CZAFV440 data set narne2 IMPLIES MEMBER
PROCESSING,DSNAMEl DOES NOT. REENTER DSNAME2
CZAFV360 CANCELLED: data set namel AND data set
name2 ARE NOT CONSISTENT FOR MEMBER PROCESSING
Explanation: The second data set implies
single member processing, and the first
implies multiple member processing.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processin9.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFV
Variable data supplied by: CZAFV
Explanation: The first data set name, DSNAM£l,
does not imply member processing, but
DSNAME2, as entered, does imply member
processing.
Filter Code: XSA
Conversational Action
User: Reenters data set name.
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFV
Variable data supplied by: CZAFV
CZAFV460 ENTER MEMBER DSORG OR DEFAULT
CZAFV380 CANCELLED: MEMBER PROCESSING IMPLIED AND
RENUMBERING SPECIFIED
Explanation: The two data set names specified
imply multiple member processing. though
renumbering was also specified.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFV
Variable data supplied by: N/A
Explanation: Specify the DSORG for the new
member: VIP, VSP, or default to give new
merrber same organization as old.
Filter Code: XSA
Conversational Action
User: Enters organization or defaults.
System: Awaits next command.
Nonconversational Action
User:
N/A
Systerr,: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFV
Variable data supplied by: N/A
CZAFV480 PROCEEDING: INPUT DSORG USED FOR OUTPUT
DATA SET
CZAFV400 MEMBER member NOT FOUND.
REENTER DSNAMEl
Explanation: The member indicated could not be
found in the input data set. The name of
the input data set should be reentered.
Filter Code: XSA
Conversational Action
User: N/A
system: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Explanation: The output data set will be given
the organization of the input data set.
Filter Code: ISA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFV
Variable data supplied by: N/A
General Messages
273
CZAFV500 CANCELLED: data set namel AND data set
name2 DO NOT HAVE SIMILAR ORGANIZATIONS
Explanation: The command cannot be effected,
since the input data set has an organization
that is not compatible with that of the
output data set.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFV
Variable data supplied by: CZAFV
CZAFV520 ENTER KEY.LENGTH FOR DCB
Explanation: The key length for the output
data set is required.
Filter Code: XSA
Conversational Action
User:
Enters key length.
System: Awaits next command.
~onconversational Action
User:
N/A
Syste.m: Continues processing.
Reference Dat:a (Also see Afpenclix B-12.)
Require~ent determined by:
CZAFV
Variable data supplied by:
N/A
CZAFV540 ENTER PAD FOR DCB
The pad (space to be left on each
page of the data set for subsequent
insertions) must be entered for the output.
data set.
Filter Code:
XSJ,
Conver~nal Action
User: Enters pad:
System! Awaits next cOInnand.
!:,onconyersatiQnal Action
User:
N/A
System: Cont:inues processing.
Reference Data (Also see Appendix E-12.)
Requirement determined by: CZAFV
Variable data supplied by:
N/A
~lanation:
CZAFV560 ENTER RKP FOR DCB
E;.!,planation: The RKP (record key pOSition -displacement of the key from the first byte
of a logical record) is required for the
output. datea set.
Filter Code: XSA
Conversational Action
User:
Enters RKP.
System: Awaits next corrmand.
Nonconversational Action
User:
N/A
System: Cont.i nues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFV
Variable data supplied by: N/A
CZAFV580 OUTPUT BLOCKSIZE WILL BE THE SAME AS
INPUT BLOCKSIZE
214
Explanation: Although the block size (maximum
block length) of the input and output data
sets are different, the copy will be
attempted using the block size of the input
data set.
Filter Code: ISA
Conversational Action
User: N/A
System: Awai ts next command.
Nonconversational Action
User:
System: N/A Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFV
Variable data supplied by: N/A
CZAFV600 OUTPUT DATA SET IS NOT A LINE DA'l'A SET.
NO RENUMBERING
Explanation: The user specified the
renumbering option, but the output is not a
line data set; therefore, no renumbering
will occur.
Filter Code: ISA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFV
Variable data supplied by: N/A
CZAFV620 data set namel DOES NOT EXIST.
DSNAMEl
REENTER
.Explanation: The data set name that the user
specified as the input data set does not
exist in the catalog or JFCB chain.
Filter Code: XSA
Conversational Action
User: Enters correct data set name.
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFV
Variable data supplied by: CZAFV
CZAFV640 PROCEEDING: DUPLICATE MEMBER member
FOUND. MEMBER IGNORED
Explanation: A duplicate of the member
indicated was found in the output data set.
Since I has been specified, this member will
not be copied.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFV
Variable data supplied by: CZAFV
CZAFV660 CANCELLED: DUPLICATE ALIAS name FOR
MEMBER member,FOUND IN name,NOT COPIED
Explanation: Finding a duFlicate alias for the
specified member means that the merr~er will
not be copied.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing_
Reference Data (Also see AFpendix B-12.)
Requirement determined by: CZAFV
Variable data supplied by: CZAFV
CZAFV662 PROCEEDING: name NOT ERASED
Explanation: The data set or member specified
could not be erased.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFV
Variable data sUFplied by: CZAFV
CZAFV670 PROCEEDING: MEl.I!.BER member, Nor FOUND
Explanation: The indicated mea~er, which was
specified in the inFut data set, was not
found.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
CZAFV
Variable data sUPFlied by: CZAFV
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFV
Variable data supplied by: N/A
CZAFV700 CANCELLED: INPUT AND OUTPUT DATA SETS ARE
THE SAME
Explanation: The user specified the same data
set for input and output, so the copy cannot
be accomplished.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
CZAFV
Variable data supplied by: N/A
CZAFV710 MEMBER member EXISTS IN DSNAME2. REENTER
DSNAME2
Explanation: The indicated member name exists
in the output data set. The name of the
output data set is incorrect.
Filter Code: XSA
Conversational Action
User: Reenters DSNAME2.
Syste~:
Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFV
Variable data supplied by: CZAFV
CZAFV720 INVALID RESPONSE. REENTER
CZAFV680 CANCELLED: SYNAD EXIT
Explanation: The copy is incomplete because a
SYNAn exit has occurred. SYNAD exits may
occur while copying into an old data set
with keys out of sequence or while copying a
VSAM data set to VISAM without a key in the
record.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
CZAFV
Variable data supplied by: N/A
CZAFV690 CANCELLED: EODAD EXIT ON OUTPUT
Explanation: The end of the output data set
was reached before the end of the input data
set. The copy is incomplete.
Filter Code: WSA
Conversational Action
Explanation: The response to the preceding
prompt is improper.
Filter Code: XSA
conversatIOnal Action
User: Enters proper response.
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFV
Variable data supplied by: N/A
CZAFV740 PROCEEDING: name IS AN ALIAS,NOT A MEMBER
NAME, IGNORED
Explanation: The indicated name is an alias
for a member rather than a member name. CDS
requires member names. The alias is ignored
but processing continues.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
General Messages
275
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFV
Variable data supplied by: CZAFV
Requirement determined by:
Variable data supplied by:
CZAGB
N/A
CZAGB400 CANCELLED: USER NOT UNDER YOUR AUTHORITY
CZA.FV800 CANCELLED: OPEN 0]" new data set name
WOULD CAUSE old data set name TO BE ERASED
Explanation: A CDS (copy data set) cannot be
performed because the opening of the new
generation data set will cause the current
generation to be erased.
Filter code: WSA
Co~versational Action
User:
N/A
System: Awaits next command.
~onconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAFV
Variable data supplied by: CZAFV
CZAFV810 CANCELLED: ERROR ENCOUNTERED WHILE
ATTEMPTING TO ACCESS CATALOG
Explanation: An invalid return code has been
received from the LOCATE routine (CZCFL)
indicating that the catalog could not be
examined.
Filter Code: WSA
Conversational Act.ion
User: N/A
System: Awai t.S next command.
Nonconversational Action
User: N/A
System: continues processing.
Feference Data (Also see Appendix B-12.)
Requirement determined by: CZAFV
Variable data supplied by: N/A
CZAGB050 CANCELLED: USERID userid INVALID
Explanation:
Userid either unknown to system,
or contains invalid characters.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAGB
Variable data supplied by' CZAGB
CZAGB300 CANCELLED: RESET OPTION INVALID. USER NOT
UNDER YOUR AUTHORITY.
Explanation: A system administrator may reset
the cumulative accounting statistics only
for those users joined by him.
Filter Code: WSA
~onversational Action
User:
N/A
Systerr.:
Awaits next command.
Nonconversational Action
User: N/A
Syste~:
Continues processing.
gef~renc~Da~~ (Also see Appendix B-12.)
276
Explanation: A system administrator may only
examine usage information for those users
joined by him.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
~eference Data (Also see Appendix B-12.)
Requirement determined by:
CZAGE
Variable data supplied hy: N/A
CZAGC003 PROCEEDING: data set name NOT CATALOGED
Explanation: The specified data set has not
been cataloged (temporary) and will be
erased.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAGC
Variable data supplied by: CZAGC
CZAGC004 PROCEEDING: userid HAD LOCATE ERROR
!:;.xplanation: LOCATE was unable to generate a
TBLOCK chain for the specified user.
Filter Code: WSA
Conversational Action
User: N/A
Systelll: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAGC
Variable data supplied by: CZAGC
CZAGC005 INVALID MODE PARAMETER. RE-ENTER A OR Sf
OR DEFAULT
Explanation: The supplied mode parameter was
invalid (not A or S). Enter either A or S
(or default, in which case A will be used).
Filter Code: WSA
Conversational Action
User:
Enters A of S (or defaults).
System: Awaits response.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAGC
Variable data supplied by: N/A
CZAGC006 INVALID MODE PARAMETER. "An IS ASSUMED
Explanation: The supplied mode parameter was
not A or S.
Processing continues with a
mode parameter of A.
Filter Code: WSA
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAGC
Variable data supplied by:
N/A
CZAGD100 CANCELLED: COMMAND NOT ALI,()WED FOR YOUR
PRIVILEGE (privilege)
EXplanation: FLOW available only to system
manager, administrator, or operator.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
CZAGD
Variable data supplied by: CZAGD
CZAGD300 PROCEEDING: PARAMETER VALUE value
INVALID. IGNORED
Explanation: Parameter value must be decimal
0-255 (or Y/N for BULKIO)
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAGD
Variable data supplied by: CZAGD
CZAGD400 PROCEEDING: parameter VALUE EXCEEDS
MAXIMUM LIMIT limit. IGNORED
Explanation: Value exceeds maximum established
at SYSGEN time.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processin9.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAGD
Variable data supplied by: CZAGD
CZAGD500 CANCELLED: BUFFER AREA NEEDED CANNOT BE
ALLOCATED
EXplanation: GETMAIN for a pagE~ buffer has
been unsuccessful.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command ..
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAGD
Variable data supplied by:
N/A
CZAGC600 CANCELLED: COMMAND FAILED TO PROCESS
PARAMETER'S>
Explanation: Non-zero return code received
from UFLO.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Ncnconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAGD
Variable data supplied by:
N/A
CZAHCOOO TASK TERMINATED DUE TO CANCEL/SHUTDOWN
Explanation: The user's task has been ended
either by shutdown of the system or
cancellation from the system operator's
terminal.
Filter Code: WSA
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAHC
Variable data supplied by:
N/A
CZAHD100 THE FOLLOWING INVALID MESSAGE WAS
RECEIVED BY YOUR TASK
Explanation: A message control block was sent
to this task with an unassigned message
code.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
CZAHD
Variable data supplied by:
N/A
CZAHD200 THE MESSAGE YOU HAVE SENT HAS AN INVALID
CODE
Explanation: The message control block sent
via VSEND macro had an unassigned code.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
General Messages
277
Requirement determined cy:
variable data supplied cy:
CZAHD
N/A
CZAHD300 THE MESSJlGE YOU HAVE SENT HAS AN
UNEXPECTED CODE
Explanation: Receiving task expected message
control block with a different code.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZABD
Variable data supplied by:
N/A
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMA
Variable data supplied by:
CZANW
CZAMA040 CANCELLED(PCS): SET COMMAND OPERAND SIZE
ERROR IN phrase
Explanation: The data location and expression
result of a SET phrase do not agree in
length. The SET command is ignored.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMA
variable data supplied by:
CZANW
CZAMA010 CANCELLEDCPCS): INCOMPATABLE DATA TYPE OR
LENGTH IN expression
Explanation: The operands of an expression
cannot be combined due to a length
disagreement, or the operands of a subscript
expression are not 1, 2, or 4 bytes in
lengt.h.
The phrase containing the
expression is ignored.
Filter Code: WRA
Conversational Action
User:
N/A
system: Awaits next corr~and.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMA
Variable data supplied by: CZANW
CZAMA020 CANCELLED{PCS): EQUAL SIGN MISSING IN
expression
Explanation: The equal sign separating the
data location and expression of a SET phrase
is absent.
The SET comrrcand is ignored.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next co~~and.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMA
Variable data supplied by: CZA~W
CZAMA030 CANCELLED (PCS}, SET CO~~~ND CPERAND
ALIGNMENT ERROR IN expression
Explal!atiol!: The expression in a SET phrase
cont,ains two or more operands, and the
result of the expression evaluation is to be
stored in a data location that is not
properly aligned.
The phrase is accepted.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
278
CZAMA060 CANCELLED(PCS): ONLY HEXADECIMAL ADDRESS
RANGE IS VALID IN operand
Explanation: A range has been specified that
is neither a range of hexadecimal addresses
nor a range of registers. The operand is
ignored.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMA
Variable data supplied by:
CZANW
CZAMA080 CANCELIED(PCS): NO ALPHABETIC CHARACTER
IN TRUNCATED SE'I' OPERAND
Explanation: The first 8 characters of the
corr~and variable name just entered are
nurr.eric. One of them must be alphabetic.
Filter Code: WSA
ccnversatiOnal Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
CZAMA
Variable data supplied by:
N/A
CZAMBOlO CANCELLED(PCS): ADDRESS address CURRENTLY
UNASSIGNED
Explanation: The user has asked the system to
run from an address that is not currently in
his virtual memory. The address may have
beco~e unassigned as a result of a previous
unload.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Afpendix B-19.)
Requirement determined by: CZAMB, CZAMF,
CZAMG, or CZAML
Variable data supplied by: CZANW
CZAMB030 CANCELLED(PCS>: NO ACTIVE PROGRAM
Explanation: A GO command with no operand has
been issued when no program has previously
been stopped, or a BRANCH command has been
issued referencing a program that has not
been called. The command iB ignored.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Aj:pendix B-19.)
Requirement determined by: CZAMB
Variable data supplied by: N/A
CZAMB040 CANCELLED(PCS}: NO PREVIOUSLY REFERENCED
MODULE EXIS'IS
Explanation: A call with no operand executes
the last module referenced by the system; in
this case, no module has been previously
referenced. Call the module by name.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAMB
Variable data supplied by: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMC
variable data supplied by: CZAMC
CZAMC030 CANCELLED (PCS) :
NO ACTIVE PROGRAM
Explanation: The user has issued a GO corrmand,
but no program is available to be resumed.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAMC
Variable data supplied by: N/A
CZAMEOIO CANCELLED(PCS): expression NOT LOGICAL
EXPRESSION
Explanat10n: An arithmetic operator was
encountered in a logical expression. The
fbrase containing the expression is ignored.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAME
Variable data supplied by: CZANW
CZAME020 CANCELLED(PCS}: phrase NOT LOGICAL DATA
CZAMC010 PROCEEDING(PCS): 'GO' IS REDUNDANT IN
DYNAMIC STATEMENT
Explanation: The user has entered a GO command
in a dynamic statement. This is redundant,
as EOB, after a dynamic statement, causes
the system to continue operation. The
dynamic statement is accej:ted.
Filter· Code: WSA
Conversational Action
User:
N/A
System: A'Naits next corrmanc.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix E-19.)
Requirement determined by: CZAMC
Variable data supflied ty:
N/A
CZAMC020 CANCELLED(PCS): ADDRESS aadress CURRENTLY
UNASSIGNED
Explanation: The user has asked the system to
run from an address that is not currently in
his virtual meroory. The address may have
become unassigned as a result of a previous
unload.
Filter Code: WSA
Conversational Action
User: N/A
Explanation: The result of the expression in
tbe IF phrase is not one, two, or four
bytes. The IF phrase is ignored.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
system: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAME
Variable data supplied by: CZANW
CZAMFOIO CANCELLED(PCS): INVALID OPERAND IN
operand
Explanation: An invalid, unusable oj:erand was
entered following a BRANCH, AT, or CALL
command. The command is ignored.
Filter Code: WRA
~r~nal Action
User: N/A
System: Awaits next command.
Ncnconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix £-19.)
Requirement determined by: CZAMB, CZAMF,
General Messages
279
CZAMG, or CZAML
Variable data supplied by:
CZANW
CZAMF020 CANCELLED: PCS 'AT' CAN ONLY BE
IMPLANTED ON A HALF-WORD BOUNDARY
Explanation: You have inserted an AT command
that is not_ on a halfword boundary.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
.Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMB or CZAMJ
Variable data supplied by: N/A
Requirement determined by:
Variable data supplied by:
CZAMF
CZANW
CZAMF060 CANCELLED(PCS): VIRTUAL MEMORY LOCATION
operand NOT ASSIGNED
Explanation: In a subscript. or in a RUN or AT
statement. a reference is made to storage on
a page that has not been assigned. The
operand is ignored.
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMF
Variable data supplied by: CZANW
CZAMF030 CANCELLED(PCS): INVALID 'AT' LOCATION;
LOCATION IS PRIVILEGED
Explanation: You requested PCS to place an
'AT' in a privileged control section. This
is an illegal request.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAMF
Variable data supplied by: N/A
CZAMF080 CANCELLED(PCS): SYSTEM MODULE OR DATA SET
REFERENCED (module)
Explanation: User has illegally attempted to
implant an AT command in coding that has the
"System" attribute.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAMF
Variable data supplied by: CZAMF
CZAMF040 CANCEI,LED(PCS): INVALID 'AT' LOCATION;
LOCATION IS PUBLIC
Explanation:
You requested PCS to place an
'AT' in a public control section. This is
an illegal request.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAMF
Variable data supplied by: N/A
CZAMF050 CANCELLED (PCS) : CALLING SEQUENCE OF
operand FOLLOWS sve
Explanation: The instruction location
specified in an AT phrase is a
location-dependent SVC. The sves that
cannot be referenced in an AT phrase are:
DLINK, AWAIT, DELET, lOCAL, PGOUT. SETXP,
SYSER, TWAIT, VSEND. The operand is
ignored.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
280
CZAMG010 CANCELLED(PCS): INVALID OPERAND IN
command
Explanation: An invalid, unusable operand was
entered following a BRANCH, AT, or CALL
command. The command is ignored.
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMB. CZAMF.
CZAMG, or C ZAML
Variable data supplied by: CZANW
CZAMG020 CANCELLED(PCS}: MORE THAN 5 PARAMETERS
Explanation: A CALL command has specified as
its operand an entry point or module name
and has then listed more than five
parameters to be supplied to that module.
The command is ignored.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by:
variable data supplied by:
CZAMG
N/A
CZAMH010 CANcELLED(PCS): expression COMPLEXITY
EXCEEDS SYSTEM LIMITS
Explanation: An internal table overflowed as a
result of nested sUbexpressions in a SET or
IF phrase. The statement is rejected. The
next command is requested at the terminal or
read from SYSIN.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMH or CZAMJ
Variable data supplied oy: CZANW
CZAMH020 CANCELLED(PCS): OPERAND
expression
~ISSING
Explanation: An expression or subexpression in
an IF, DISPLAY, DUMP, or SE'f' phrase does not
contain an operand or ends ~ith an operator.
The phrase is ignored. This message may be
issued, for example, when an invalid
operation such as exponentiation is
attempted. In the expression 'DISPLAY
9**2', the second asterisk is treated as an
irr,proper or missing operand.
Filter Code: WSA
Conversational Action
User:
N/A
system: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMH or CZAMJ
Variable data supplied by: CZANW
CZAMH030 CANCELLED(PCS): PARENTHESES ERROR
expression
Explanation: A subscript, SET, or IF
expression contains an unmatched left or
right parenthesis. The next command is
requested at the terminal or read from
SYSIN.
Filter Code: WSA
User:
N/A
System: Awaits next corrmand.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMH or CZAMJ
Variable data supplied by: CZANW
CZAMH040 CANCELLED(PCS): NO CLOSING QUOTATION MARK
statement
Explanation: An address constant, hexadecimal
constant, character constant, or hexadecimal
address does not end in an apostrophe. The
next command is requested at the terminal or
read from SYSIN.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMH
Variable data supplied by: CZANW
CZAMH050 PROCEEDING(PCS): UNALIGNED DATA
REFERENCES references
Explanation: A command has been issued
requiring registers to complete a
mathematical operation, but one or more of
the data references are unaligned with
respect to their length.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAMH
Variable data supplied by: CZAMH
CZAMH060 CANCELLED{PCS): ILLEGAL USE OF OPERATORS
expression
Explanation: An expression contains an
arithmetic operator in a logical expression,
a logical operator in an arithmetic
subexpression, or a relational operator in
an arithmetic subexpression. The phrase
containing the expression is ignored.
Filter Code: WSA
conversatIOnal Action
Suer: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZ~~H
Variable data supplied by: CZANW
CZAMH070 CANCELLED{PCS): INCOMPATIBLE DATA TYPE OR
LENG'IH e:xpression
Explanation: The operands of an expression
cannot be combined due to a length
disagreement or the operands of a subscript
expression are not 1, 2, or 4 bytes in
length. The phrase containing the
expression is ignored.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMH
Variable data supplied by: CZAMA
General Messages
281
CZAMH080 PROCEEDING(PCS): FLOATING POINT
ARITHMETIC ASSUMED expression
Explanation: The data types of operand in an
expression disagree and the evaluation of
the expression can only be performed in a
floating-point register.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMH
Variable data supplied by: CZA~~
CZAMH090 PROCEEDING(PCS): CANNOT DEFINE DATA TYPE
expression
Explanation: The type of arithmetic to be used
in an expression evaluation is unknown.
This message is issued rather than a
prompting message when the task is
nonconversational, or when there was a
previous invalid response to a prompting
message.
The statement is rejected.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next corr®and.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-l9.)
Requirement determined by: CZA~H
Variable data supplied by: CZANW
Requirement determined by:
Variable data supplied by:
CZAMH
CZANW
CZAMHl20 PROCEEDING(PCS): DATA TYPE CONSTANT
OPERAND ASSUMED TO BE INTEGER operand
Explanation: After a data type error, as
described in CZAMH100, the data type of the
constant is treated as if i t were an
integer.
.Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-l9.)
Requirement determined by: CZAMH
Variable data supplied by:
CZANW
CZAMH130 CANCELLED(PCS): ERROR IN VARIABLE
SIZE--operand NOT LOADABLE INTO GENERAL REGISTER
A data type of constant operand
is defined or assumed as an integer, but the
length is other than four bytes. The
operand cannot be loaded into a general
register. The operand is ignored.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMH
Variable data supplied by: CZANW
E~planation:
CZAMHIOO PROCEEDING(PCS): OPERAND DATA TYPES DO
NOT AGREE operand
The data type of a variable
operand does not agree with the data type of
any constant operand, or the data type of
two variable operands do not agree with each
other.
Filter Code: WSA
'Conversational Action
User: N/A
Syste~:
Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAl"H
Variable data supplied by: CZA~w
~lanation:
CZAMH1IO CANCELLED(PCS): DATA TYPE OF CONSTANTS
MUST AGREE operand
Explanation: The data types of two constant.
operands do not agree with each other.
Operands are ignored.
Filter Code:
WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-19.)
282
CZAMH140 PROCEEDING(PCS): CONSTANT OPERAND ASSUMED
TO BE FLOATING POINT operand
Explanation: After a data type error, as
described in CZAMHlOO, the data type of the
constant is treated as if it were floating
point.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/l\
System: continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMH
Variable data supplied by: CZANW
CZAMHl.50 CANCELLED(PCS): ERROR IN VARIABLE
SIZE--operand NOT LOADABLE INTO FLOATING POINT
REGISTER
Explanation: A data type of constant operand
is defined or assumed to be floating point,
but the length is other than eight bytes and
cannot be loaded into a floating point
register. The operand is ignored.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMH
Variable data supplied by: CZANW
CZAMH160 PROCEEDING (PCS) : CONSTANT OPERAND ASSUMED
TO BE HEXADECIMAL operand
Explanation: If the system finds no
justification to assume that the data type
of a constant operand is integer or floating
point, it assumes that it is hexadecimal or
character. This is the hexadecimal
assumption notification.
Filter Code: WSA
Conversational Action
User: N/A
system: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMH
Variable data supplied by: CZANW
CZAMH170 PROCEEDING(PCS): CONSTANT OPERAND ASSUMED
TO BE CHARACTER operand
Explanation: If the system finds no
justification to assume that the data type
of a constant operand is integer or floating
point it assumes that it is hexadecimal or
character. This is the character assumption
notification.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZA~~
variable data supplied by: CZANW
CZAMH180 CANCELLEDCPCS): INVALID OPERATION ON
CHARACTER aATA
Explanation: A data type of constant or
variable operand, defined or assumed as
character, is being operated on in an
invalid manner for a character. The operand
is ignored.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMH
Variable data supplied by: N/A
CZAMH190 PROCEEDING (PCS) : operand ASSUMED TO BE
HEXADECIMAL
Explanation: A data type of a variable operand
in an expression in which an operator has
been identified has not been defined or
assumed as integer, floating pOint,
character, or hexadecimal.
It is now
assumed to be hexadecimal.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMH
Variable data supplied by: CZANW
CZAMH200 ENTER(PCS): EVALUATION METHOD FOR
expression--ENTER L or I
Explanation: The arithmetic method to be used
in evaluating an expression is unknown.
Valid entries are L (logical) or I
(integer) .
Filter Code: XSA
Conversational Action
User: Enters L or I.
System: Processing continues. If any
response other than I or L is entered,
the command is rejected.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-19.)
Requirement determined by: CFANF
Variable data supplied by: CFANX
Message residence: CFANX
Message issued by: CFANX
CZAMH210 ENTERCPCS): EVALUATION METHOD FOR
expression--ENTER L or R
Explanation: The arithmetic method to be used
in evaluating an expression is unknown.
Valid entries are L (logical) or R (real).
Filter Code: XSA
Conversational Action
User: Responds "'ith L or R.
Systerr,: Processing continues.
If response
other than L or R is given, the statement
is rejected.
Nonconversational Action
User: N/A
Syst~em:
N/A
Reference Data (Also see Appendix B-19.)
Requirement determined by: CFANF
Variable data supplied by: CFANX
Message residence: CFANX
~essage issued by:
CFANX
CZAMH220 ENTER(PCS): EVALUATION METHOD FOR
expression--EN'I'ER L, R or I
Explanation: The arithmetic method to be used
in evaluating an expression is unknown.
Valid entries are L (logical), or I
(integer), or R (real).
Filter Code: XSA
Conversational Action
User: Responds with L, R, or I.
System: Processing continues. If response
other than L, R, or I is given, the
statement is reiected.
Ncnconversational Action
General Messages
283
User: N/A
System: N/A
Reference Data (Also see Appendix B-19.)
Requirement determined by: CFANF
Variable data supplied by: CFANX
Message residence: CFANX
Message issued by: CFANX
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMI
Variable data supplied by: CZANW
CZAMI.050 CANCELLED (PCS) : VIRTUAL MEMORY LOCATION
operand NOT ASSIGNED
CZAMI010 CANCELLEDCPCS): RANGE ADDRESSING ERROR IN
range
Explanation: In a subscript, the VMA of the
range upper limit is lower than the VMA of
the range lower limit. The operand is
ignored.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by CZAMI
Variable data supplied by: CZANW
Explanation: In a subscript, or in a RUN or AT
statement, a reference is made to storage on
a page that has not been aSSigned. The
operand is ignored.
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Dat_a (Also see Appendix B-lg.)
Requirement determined by: CZAMI
Variable data supplied by: CZANW
CZAMI060 CANCELLFD(PCS): INVALID USE OF DUMMY
VARIABLE IN operand
CZAMI020 PROCEEDING(PCS): RANGE SIZE ERROR IN
dataloc
Explanation: PCS has assumed the maximum range
size.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see AIpendix B-19.)
Requirement determined by: CZAMJ or CZAMI
Variable data supplied by: CZANW
CZAMI030 CANCELLED(PCS): INVALID UPPER LIMIT IN
ope.rand
Explanation: An invalid range is specified.
The only ranges allowed are a hex location:
hex location, register: register, or
hex/symbol: symbol/hex.
Filter Code: WSA
Conversational Actio~
User: N/A
System: Awaits next corr~and.
Nonconversational Action
User: N/JI
system: continues processing.
Reference Data (Also see AIpendix B-19.)
Requirement determined by: CZAl'!I
Variable data supplied by: CZANW
CZAMI040 CANCELLED(PCS}: registers ARE INVALID
REGISTER(S)
Explanation: A reference is made to a
nonexistent register, alone or in a range.
The operand is ignored.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
284
Explanation: A FORTRAN dummy argument is used
in a range or with an offset.
The operand
is ignored.
Filter Code: WSA
Conversational Action
User: N/A
System: A~aits next command.
Nonconversational Action
User: N/A
system: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement deterrr,ined by: CZAMI
Variable data supplied by: CZANW
CZAMI070 CANCELLED(PCS): operand CROSSES CONTROL
SECTION BOUNDARY
Explanation: Both symbols in a range are not
defined in the same control section, or an
offset or length causes the data location to
be outside the control section that the
symbol is defined in. The operand is
ignored.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMI
Variable data supplied by: CZANW
CZAMJ010 CANCELLED(PCS): expression COMPLEXITY
EXCEEDS SYSTEM LIMITS
Explanation: An internal table overflowed as a
result of nested subexpressions in a SET or
IF phrase. The statement is rejected. The
next command is requested from the terminal
or read from SYSIN.
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMH or CZAMJ
Variable data supplied by: CZANW
CZAMJ020 CANCELLED(PCS): OPERAND MISSING IN
expression
Explanation: An expression or subexpression in
an IF, DISPLAY, DUMP, or SET phrase does not
contain an operand or ends with an operator.
The phrase is ignored. The message may be
issued, for example, when an invalid
operation such as exponentiation is
attempted. In the expression 'DISPLAY
9**2', the second asterisk is treated as an
improper or missing operand.
Filter Code: WRA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMH or CZAMJ
Variable data supplied by: CZANW
The operand is ignored.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMJ
Variable data supplied by: CZANW
CZAMJ070 CANCELLED(PCS): NO CLOSING QUOTATION
IN statement
~ARK
Explanation: An address constant, hexadecimal
constant, character constant, or hexadecimal
address does not end in an apostrophe. The
next comwand is requested at,the terminal or
read from SYSIN.
Filter Code: WRA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMJ
Variable data supplied by: CZANW
CZAMJ030 PROCEEDING(PCS): CONSTANT TRUNCATED IN
expression
Explanation: A constant in a subscript, SET,
or IF expression is truncated.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/l\
System: continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMJ
Variable data supplied by: CZANW
CZAMJ040 CANCELLED(PCS):
expreSSion
PARENTHESES ERROR IN
Explanation: A subscript, SET, or IF
expression contains an unmatched left or
right parenthesis. The next command is
requested at the terminal or read from
SYSIN.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAMH or CZAMJ
Variable data supplied by: CZANW
CZAMJ050 CANCELLED(PCS): INVALID LENGTH IN operand
Explanation: The length in an offset range is
not an integer or a hexadecimal constant.
CZAMJ080 PROCEEDING(PCS): UNALIGNED DATA
REFERENCES IN expression
Explanation: A command has been issued
requiring registers to complete a
mathematical operation, but one (or more) of
the data references is unaligned with
respect to its length.
Filter Code: WRA
Conversational Action
User: N/l\
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMJ
Variable data supplied by: CZANW
CZAMJ090 CANCEILED(PCS): ILLEGAL USE OF OPERATORS
IN expression
Explanation: An arithmetic operator is
contained in a logical expression; a logical
operator in an arithmetic sutexpression; or
a relational operator in an arithmetic
subexpression. The phrase containing the
expressicn is ignored.
Filter Code: WRA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMJ
Variable data supplied by: CZANW
General Messages
285
CZAMJ100 CANCELLED(PCS): VIRTUAL MEMORY LOCATION
operand NOT ASSIGNED
Explanation: In a subscript. or in a RUN or AT
statement. a reference is made to store on a
page that bas not been assigned. The
operand is ignored.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMJ
Variable data supplied by: CZANW
CZAMJll0 PROCEEDING(PCS}: subscript ASSUMED TO BE
INTEGER
Explanation: An operand in the subscript of an
array is not defined in the ISD as an
integer.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMJ
Variable data supplied by: CZANW
Explanation: Excess dimensions are specified
in the subscript of an array. The phrase
containing the subscript is ignored.
Filter Cond: WSA
Conversational Action
User:
N/A
System: A~aits next command.
Ncnconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMJ
Variable data supplied by: CZANW
CZAMJ150 CANCELLED (PCS): TOO MANY SUBSCRIPTS IN
operand
Explanation: In forming a Polish string for a
subscripted or offset variable, the system
encountered more subscripts than could be
nested. The phrase containing the subscript
is ignored.
Filter Code: WSA
Conversational Action
User: N/A
System: A~its next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMJ
Variable data supplied by: CZANW
CZAMJ160 CANCELLED(PCS): ONLY HEXADECIMAL ADDRESS
RANGE IS VALID IN operand
CZAMJ120 CAl~CELLED(PCS): DIMENSION DELIMITER IN
SUBEXPRESSION subscript
Explanation: A comma was encountered in a
subscript subexpression. The phrase
containing the expression is ignored.
Filter Code: WSA
Conversational Action
User: N/A
system: Awaits next command.
Nonconversational Action
User: N/A
system: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMJ
Variable data supplied by: CZANW
CZAMJ130 CANCELLED{PCS): TOO FEW DEMINSIONS IN
subscript
EXFlanation: All cf the dimensions of an array
are not specified in the subscript. The
phrase containing the subscript is ignored.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMJ
Variable data supplied by: CZANW
CZAMJ140 CANCELLED(PCS}: TOO MANY DEMINSIONS IN
subscript
286
Explanation: A range has been specified that
is neither a range of hexadecirral addresses
nor a range of registers. The operand is
ignored.
Filter Code: WRA
Ccnversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMJ
Variable data supplied by: CZANW
CZAMJ170 PROCEEDING(PCS): SYMBOLIC OFFSET LENGTH
ASSUMED TO BE 4 BYTES
Explanation: An external. internal, or defined
command variable symbol was used to define
an offset--the implicit or explicit length
is not 4 bytes--an external symbol has a
length attribute of 1. PCS will change the
length of 4 bytes and continue processing.
Approval or rejection of this assuITption
will be requested.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAMJ
Variable data supplied by: CZAMJ
CZAMJ180 PROCEEDING (PCS>:
operand. HEX ASSUMED
INVALID TYPE FIELD IN
Explanation: An invalid character has been
entered in the type field of an offset.
Valid characters are: B(binary>,
C(character), F(floating point),
X(hexadecimal), I(integer), or S(symbolic
assembler language).
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAMJ
Variable data supplied by: CZAMJ
CZAML010 CANCELLED(PCS}: SYNTAX ERROR IN phrase
Explanation: The user has entered a phrase
that is syntactically incorrect,
specifically, a combination of source list
items other than those described in Command
System User's Guide, Form GC28-200l. The
phrase is ignored.
Fi 1 ter Code: WSA
Conversational Action
User: N/A
System: Awaits next corr~and.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAML
Variabl.e data supplied by: CZANW
CZAML020 CANCELLED(PCS): NO CLOSING QUOTATION MARK
IN statement
Explanation: An address constant, hexadecimal
constant, character constant, or hexadecimal
address does not end in an apostrophe. The
next command is requested at T.he terminal or
read from SYSIN.
Filter Code: WRA
Conversa~ional Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Conti nues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAML
variable data supplied by: CZANW
CZAML030 PROCEEDING(PCS): HEXADECIMAL FIELD
TRUNCATED IN field
Explanation: A hexadecimal location or offset
is more than one word.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by:
Variable data supplied by:
CZAML
CZANW
CZAML040 PROCEEDING(PCS}: INVALID HEXADECIMAL
CHARACTERS IN field ASSUMED TO BE a
Explanation: A hexadecimal constant or
character other than 0 through 9 or A
through F has been entered.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAML
Variable data supplied by: CZANW
CZAML050 PROCEEDING(PCS}: INTEGER TRUNCATED IN
integer
Explanation: An integer constant exceeds 31
bits.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAML
Variable data supplied by: CZANW
CZAML060 PROCEEDING(PCS): EXPONENT RANGE ERROR IN
constant--MAXIMUM VALUE ASSUMED
Explanation: A floating-point constant exceeds
10 75 •
Filter Code: WSA
Ccnversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAML
Variable data supplied by: CZANW
CZAML070 PROCEEDING(PCS}:EXPONENT RANGE ERROR IN
constant--ASSUMED TO BE 0
Explanation: A floating-point constant is less
than 10- 75 •
Filter Code: WSA
Conversational Action
User: N/A
system: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAML
Variable data supplied by: CZANW
CZAML080 CANCELLED (PCS) : registers ARE INVALID
REGISTERS
General Messages
287
Explanation:
A reference is made to a
nonexistent register, alone or in a range.
The operand is ignored.
Filter Code: WRA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAML
Variable data supplied by:
CZANW
CZAML090 PROCEEDING{PCS): NULL FIELD IN operand
ASSUMED TO BE 0
Explanation: A hexadecimal constant or
hexadecimal address contains no characters.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined ~y:
CZAML
Variable data supplied by: CZANW
CZAML110 CANCELLEDCPCS): INVALID OPERMlD IN
operand
Explanation: An invalid, unusable oJ;:erand was
entered following a BRANCH, AT, or CALL
command. The command is ignored.
Filter Code:
WRA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by:
CZAMB, CZAMF,
CZAMG I or CZAML
Variable data supplied by: CZANW
CZAML120 CANCELLED(PCS):
keyword
INVALID KEYWORD IN
Explanation: The CALL or BRANCH command has
been called using keyword format, but
without USing the correct keyword -- 'NAME'
(for CALL) and 'INSTLOC' (for BRANCH).
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAML
Variable data supplied by:
CZANW
CZAML130 CANCELLED(PCS): REFERENCE TO % COUNTER
INVALID IN STATIC CO~MAND MODE
Explanation:
% counter can be referenced only
as part of a dynamic statement (AT or IF).
288
Example: AT X; DISPLAY %; STOP.
Once an
underscore is present, the % counter is no
longer available for interrogation.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
Syst.en1: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
CZAML
Variable data supplied by: N/A
CZAM0010 CANCELLED(PCS): SYSTEM SYMBOL IN varia tIe
CANNOT BE REFERENCED
~lanation:
The symbol definition in the
variable field could not be located after an
initial search, an attempted loading of the
module, and a second search.
The command is
ignored.
Filter Code:
WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (also see Appendix £-19.)
Requirement determined by:
CZAMO
Variable data supplied by: CZANw
CZAM0020 CANCELLED (PCS), symbol UNDEFINED SYMBOL
~lanation:
A module was loaded via a PCS
cOlfmand, and an error was detected in the
loading process, or no entry was found in
the dictionary.
The operand is ignored.
filter Code: WSA
Conversational ALtion
User:
N/A
System: A'iliaits next command.
Nonconversational Actio~
User:
N/A
System: Continues processing.
Referen.se£Data (Also see Appendix B-19.)
Requirement determined by:
CZAMO
Variable data supplied by: CZANW
CZAMPOIO CANCELLED(PCS): operand CROSSES CONTROL
SECTION BOUNDARY
Explana!..ion:
Both symbols in a range are not
defined in the same control section, or an
offSet or length causes the data location to
be outside the control seotioTj that the
syrrbol is defined in. The operand is
ignored.
Filter Code: WRA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
~-~~----."
System: continues processing.
~eference Data (Also see Appendix B-19.)
Reguirement determined by:
CZAMP
Variable data supplied by: CZANW
CZAMQOIO PROCEEDING(PCS): EMBEDDED BLANKS IN field
Explanation: In scanning a source list line
for a delimiter, one or more embedded blanks
were encountered.
You will be Frompted to
respond whether you want PCS to remove the
blanks.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMQ
Variable dar,a supplied by: CZANW
CZAMQ02Q PROCEEDING(PCS): field TRUNCATED TO 8
CHARACfERS
Explanation:
In scanning a source list line
for a delimiter, more then eight characters
were encountered in an alphameric field.
The field is truncated from the right. A
new eight-character field is accepted as the
name.
Filter Code: WSA
Conversational Action
User:
N/A
Systerr! Awaits next corrmand.
Nonconversational Action
User:
N/A
System: Continues processing.
~eference Data (Also see Appendix B-19.l
Requir6nent determined by: CZAMQ
Variable data supplied by: CZANW
CZAMROI0 .PHRASE REJECTED BY PCS
Explanarion: All the operands of a S1;'T, AT.
RUN, DISPLAY, or DUMP phrase, or one or more
operands of an IF phrase are in error. The
phrase is ignored.
Filter Code:
ISA
~onv~rsational_ActiQ!!
User:
N/A
Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMR I> CZANA
Variable data supplied by:
N/A
Syste~:
CZAMR030 CANCELLED(PCS): INVALID MODULE NAME IN
llmame
~lanation:
The QUALIFY direct.ive contains an
invalid module name. The opel.'and is
ignored.
Filter Code: WSA
~ersatIOnal Action
User:
N/A
System: Awaits next command.
Nonconversational Action
. User:
N/A
.system: continues processing.
Reference Data (Also see Appendix B-19.)
--Requirement determined J:y: CZAi'lR
Variable data supplied by: CZAMR
CZAMR040 CANCEI.1.EDCPCS):
keyword
INVALID KEYWORD IN
Explanation: The QUALIFY command has been
called using keyword format, but without
using the correct keyword -MNAME."
Filter Code: WSA
Conversational Action
User: N/A
system: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMR
Variable data supplied by: CZANW
CZAMS010 CANCELLED (PCS) : STATEMENT NUMBER
statement number IS INVALID
Explanation: A PCS statement number in a
RE~OVE is not an integer.
The character is
ignored.
Filter Code: WSA
Ccnversational AGt:.ion
User:
N/A
i3ystem: Awai ts next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMS
Variable data supplied by: CZANW
CZAMS020 CANCELLED(PCS): variable IS INVALID
CELIMI'I'ER
Explanation: An invalid delimiter was
encountered in a SET, AT, IF, DISPLAY, or
DU~P phrase, or the closing parenthesis is
missing following a subscripted FORTRAN
Btatement number or an offset length. The
variable printed is the invalid delimiter
plus any other characters that are being
ignored, the number of the erroneous FORTRAN
statement, or the operand and offset in
error. Only the AT phrase is accepted.
Filter Code: WSA
Conversational Action
User:
N/A
SYBtem: Awaits next command.
Ncnconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix £-19.)
Requirement determined by: CZ1\JIIJS
Variable data supplied by: CZANW
CZAMSO]O CANCELl.ED(PCS): STATEMENT state.lllentno
CANNOT BE FOUND
Explanation: You have tried to remove an AT
statement nun,ber greater than any entered.
Filter Code: IS1I
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
g§ference Data (Also see Appendix B-19.)
General Messages
289
Requirement determined by:
Variable data supplied by:
CZAMS
CZANW
CZAMT010 PROCEEDI~G(PCS): ALL AT STATEMENTS IN
module name REMOVED BY UNLOAD
Explanation: The user has caused the subject
module to be unloaded either explicitly via
the UNLOAD command, or implicitly via
recompilation or reassembly. The UNLOAD
command removes all AT statements prior to
unloading the module.
Filter Code: WSA
Conversational Action
User: N/A
system: Awaits next command.
Nonconversational Action
User: N/A
System:
continues processing.
Reference Data (Also see A~pendix B-12.)
Requirement determined by: CZAMT
Variable data sup~lied by: CZAMT
CZAMT020 REMOVED at statement
Explanation: This 'AT' statement was deleted
and the user code was restored.
Filter Code:
ISA
conversational Action
User:
N/A
System: Awai ts next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMT
Variable data supplied by: CZAMT
CZAMT030 PROCEEDING(PCS): THE 'AT' STATEMENT
COUNTER HAS BEEN RESET TO 00001
Explanation: After deleting all A~ statements
in this task, the 'AT' counter was reset to
the LOGON value, 00001.
Filter Code:
ISA
Conversational Action
User: N/A
System:
Awaits next corrmand.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMT
Variable data supplied by:
N/A
CZAMZ002 WANT TO TERMINATE PROCESSING?
Explanation:
Only one language processor
controller (IPC), may be active at a time.
The current active LPC will not let a new
LPC be activated at this time. You may
override it and invoke its end routine by
entering Y. Otherwise, enter N.
Filter Code: XSA
Conversational Action
User: Specified in command.
System: Continues processing.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAMZ
Variable data supplied by: N/A
CZAMZ003 CANCELLED:
EDIT)
NO ACTIVE PROCESSOR (SUCH AS
Explanation: certain commands, such as LIST,
INSERT, EXCISE, REVISE, and CORRECT, require
a processor (such as the Text Editor) to be
active.
You may have already entered END or
forgotten to enter EDIT.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Ncnconversational Action
User: N/A
System:
continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAMZ
Variable data supplied by:
N/A
CZAMZOOq CANCELLED: NO TRANSIENT COMMAND PROCESSOR
CEFINEI::
Explanation: The currently active language
processor has not defined a transient
command entry point during its
initialization (via LPCINIT rracro).
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAMZ
Variable data supplied by: N/A
CZAMZ005 CANCEILED: DATA SET CANNOT BE
REFERENCED--PROCESSOR WILL BE ENDED
CZAMT040 CANCELLE!)(PCS}:
SYSTEM FAULT (CZAMT040)
Explanation: PCS has detected an unfound
module name after a hash search.
Filter Code: XSA
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAMT
Variable data supplied by: N/A
290
Explanation: The language processor which is
in progress will be discontinued because the
data set being referenced was found to have
a closed DCB. CZASW4 (LPCEDIT) or CZASW5
require that the DCB is open.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
Variable data supplied by:
CZAMZ
N/A
CZAMZ006 CANCELLED: DATA SET NAME OR QUALIFIER
GREATER THAN 8 CHARACTERS
Explanation: A data set name parameter was
entered which is greater than eight
characters or contains a qualifier which
exceeds eight characters. Data set names or
qualifiers cannot exceed eight characters.
Enter your last request with a corrected
data set name or qualifier.
Filter Code: WSA
Conversational Action
User: May enter another command.
System: Command ignored.
Nonconversational Action
User: May enter another command.
System: CORmand ignored.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZA~Z
Variable data supplied by: N/A
CZAMZ001 CANCELLED: NO PREVIOUSLY REFERENCED
MODULE EXISTS
Explanation: A LOAD or UNLOAD with no
parameters will normally load or unload the
last module referenced by the system. In
this case, no module has been previously
referenced. Call the module by name.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAMZ
Variable data supplied by: N/A
Conversational Action
User: N/A
System: A~its next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAMZ
Variable data supplied by: CZAMZ
CZAMZ400 CANCELLED: NO TRANSACTION TABLE HAS BEEN
REQUESTED.
Explanation: The ENABLE and DISABLE commands
have no effect on processing unless a
transaction has been requested by defaulting
TRANTAB=Y.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAMZ
Variable data supplied by:
N/A
CZAMZ410 CANCELLED: LPCEDIT NOT ALLOwED ON LEVEL
ZERO
Explanation: LPCEDIT not accepted unless user
has dispatched a language processor through
the command system.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAMZ
Variable data supplied by: N/A
CZAMZ102 CANCELLED: AT MAXIMUM LEVEL CURRENTLY
Explanation: The user has just taken an action
which would have caused the ten-level stack
to overflow. A RTRN command will return the
usee to level zero and the system will
forget all previously interrupted programs.
The user atten,pted to create a new level
with an attention, a PCS AT, a CLIC, CLIP,
COM~AND, PAUSE, or OBEY macro,
or a program
interruption.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next corr~and.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAl"Z
Variable data supplied by: N/A
CZAMZ103 MODULE module name WAS ACTIVE. IT WILL BE
REMOVED FROM THE STACK
Explanation: A stack entry for the specified
name has been marked inactive.
Filter Code: ISA
CZAMZ610 USER INTERRUPT ROUTINE ACTIVE
Explanation: A nonprivileged interruption
routine was previously dispatched and has
not yet returned.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAMZ
Variable data supplied by: N/A
CZAMZ650 CANCELLED: USER INTERRUPT ROUTINE ACTIVE
Explanation: A nonprivileged interruption
routine was previously dispatched and has
not yet returned.
F'il ter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
General Messages
291
User: N/A
System:
continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAMZ
Variable data supplied by: N/A
CZAMZ660 CANCELLED: AT MAXIMUM LEVEL CURRENTLY
Explanation: The stack can only save ten
levels of interrupted programs and all ten
levels are currently in use. The RTRN
command can be used to reset the stack back
to level zero.
Filter code: WSA
Conversational Action
User:
N/A
System: Awaits next corrIDand.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Arpendix B-12.)
Requirement determined by: CZAMZ
Variable data supplied by: N/A
CZAMZ670 CANCELLED: ONLY Y OR N ARE VALID SIRTEST
PARAMETERS
Explanation: The only valid parameters for the
SIRTEST operand are Y (check for active SIR
routine) or N (do not check).
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAMZ
Variable data supplied by: N/A
CZAMZ6S0 CANCELLED: PUSH COMMAND INVALID FOR
CURRENTLY ACTIVE PROGRAM
Explanation:
certain commands, such as the
text-editing commands, can run to completion
only once per call; hence these commands
cannot be operated on by the PUSH command.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System:
Continues processing.
Reference Data (Also see Arpendix B-12.)
Requirement determined by: CZAMZ
Variable data supplied by: N/A
CZAMZ805 NO PROGRAMS IN STACK
Explanation: No interrupted programs are
currently being saved in the stack.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues rrocessing.
Reference Data (Also see Appendix B-12.)
292
Requirement determined by:
Variable data supplied by:
CZAMZ
N/A
CZAMZS07 CANCELLED: NO ACTIVE SYSOPERO LEVEL
Explanation: EXIT command execution from level
one SYSOPERO program is not allowed.
It
must remain accessible in support of system
operation.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
system: ContinUes proceSSing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAMZ
Variable data supplied by: N/A
CZAMZ808 CANCELLED: ONLY Y OR N ARE VALID SIRTEST
PARAMETERS
Explanation: The only valid parameters for the
SIRTEST operand are Y (check for active SIR
routine> or N (do not check).
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Reguirerr,ent determined by:
CZAMZ
Variable data supplied by: N/A
CZAMZ809 CANCELLED: USER INTERRUPT ROUTINE ACTIVE
Explanation: A nonprivileged interruption
routine was previously dispatched and has
not yet returned.
Filter Code: WSA
Conversational Action
User: N/A
System:
Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAMZ
Variable data supplied by:
N/A
CZANAOI0
STATE~ENT
REJECTED BY
pes
Explanation:
(1) A fatal error occurred in the
statement analysis, or all stand-alone
phrases (i. e., phrases separated by
semicolons) were ignored, or (2) the user
responded to a CZA~S040 prompt message with
Y, or defaulted, or gave any response but N,
or (3) the user gave a wrong response to
CZAMH200, CZAMH210, or CZAMH220 prompt
messages. The next command is requested
from the user's terminal or read from SYSIN.
Filter Code: ISA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
system: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZANA
Variable data supplied by:
N/A
Requirement determined by:
Variable data supplied by:
CZANG
CZANW
CZANH010 CANCEI.LED(PCS): FIXED POINT OVERFLOW WHEN
CONSTANTS COMBINED
CZANA020 PHRASE REJECTED BY PCS
Explanation: All the operands of a SET, AT,
RUN, DISPLAY. or DUMP phrase, or one or more
operands of an IF phrase are in errOl~. The
phrase is ignored.
Filter Code:
ISA
Conversational Action
User:
N/A
System: Awaits next. command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by:
CZAMR, C"ANA
Variable data supplied by: N/A
~lanation:
A fixed point overflow access in
the combination of constants in an
expression has occurred.
The statement is
rejected.
Filter Code: WSA
Conversational action
User:
N/A
System: Awaits next command.
Nonconversat.ional Action
User:
N/A
System: Continues processing.
Beff'rence Data (Also see Appendix B-19.)
Requirement determined by: CZANH
Variable data supplied by:
N/A
CZANH020 CANCELLED(PCS): FIXED POINT DIVIDE CHECK
WHEN CONSTANTS COMBINED
CZANA030 ENTER (PCS) : TO REJEC'T' PHRASE TYPE Y, TO
CONTINUE TYPE N. DEFAULT=Y
Explanation:
The user entered a phrase causing
a nonfatal diagnostic.
PCS :rejected this
phrase.
If you do not accept this
rejection, type N to continue.
If not., type
Y or default.
Filter Code:
WSC
Conversational Action
User:
Enters Y, N, or default.
System: Awaits response.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZANA
Variable data supplied by:
N/A
CZANFOIO CANCELLED (PCS) : SYSTEM FAULT
Explanation: PCS is not referencing a polish
string when it should be, or the string has
an invalid entry.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System:
Continues processinq.
Reference Data (Also see Appendix B-19.)
Requirement determined by:
CZANF
Variable data supplied by: N/A
CZANG010 CANCELLED {PCS} : DIMENSION CHECK IN array
Explanation:
A dimension error was detected;
dimension inconsistent with array to be
worked on.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits nexT. command"
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
~~'lanation:
A fixed point divide interruption
occurred in t~he process of cou;bining
constants in an expression. 'I'he statement
is rejected.
Filter Code: WSA
~£9v~rsational Action
User:
N/A
System: Awaits next. command.
!'!Qnconversationa1 Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by:
CZANB
Variable data supplied by: N/A
CZANHO 30 CANCEl,LED (PCS): EXPONENT OVERFI.,OW WHEN
CONSTANTS COI'BINED
Explanation: An exponent. overflow interruption
occurred in the process of combining
constant operands of an expr:ession. The
statement is reiected.
Filter Code: VlSAConversa:tIOnal Action
User:
N/A
System:
Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by:
CZANH
Va.riable data supplied by:
N/A
CZANH()I!O CANCEI.LED(PCS), EXPONENT UNDERFLOW WHEN
CONSTANTS COMBINED
~lanation:
An exponent underflow
interruption occurr·ed in the process of
corrbining constant operands of an
expression. The statement is rejected.
Filter Code:
VISA
Conversational Action
User:
N/A
System: Awai ts next command.
Nonconversational Action
User: N'/A
System: Continues processing.
General Messages
293
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZANH
Variable data supplied by: N/A
Requirement determined by:
Variable data supplied by:
CZANX
CZANX
CZAOAOI0 CANCELLED(PCS): COULD NOT LOAD symbol
CZANH050 CANCELLED(PCS): FLOATING POINT DIVIDE
CHECK WHEN CONSTANTS COMBINED
Explanation: A floating-pcint divide
interruption occurred in the process of
combining constant operands of an
expression. The statement is rejected.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
reference Data (Also see Appendix B-19.)
Requirement determined by: CZANH
Variable data supplied by: N/A
CZANW010 CANCELLED(PCS): CHARACTERS characters
IGNORED
Explanation: The input character stream is
ignored due to errors detected by PCS.
Filter Code: ISA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZANW
Variable data supplied by: CZANW
Explanation: In the nonconversational mode a
reference is made to an external symbol
defined in an object module that has nct
been loaded. The operand is ignored.
Filter Code: WSA
Conversational Action
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAOA
Variable data supplied by: CZANW
CZAOA030 CANCELLED(PCS): NO INTERNAL SYMBOL
DICTIONARY FOR operand
Explanation: A reference is made to a program
module that does not have an internal symbol
dictionary (LSD). The operand is ignored.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAOA
Variable data supplied by: CZANW
CZAOA040 CANCELLEDCPCS): operand NOT IN LINK EDIT
INTERNAL SYMBOL DICTIONARY
CZANX010 CANCELLED(PCS): NO PROMPTING AVAILABLE IN
BACKGROUND MODE
Explanation: In nonconversational mode, errors
that would cause prompting in conversational
mode will cause this message to be written
on SYSOUT.
Filter Code: WSB
Conversational Action
User: N/A
system: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZANX
Variable data supplied by: N/A
CZANX020 CANCELLED (PCS): VIRTUAL MEt-lORY NOT
AVAILABLE FOR name
Explanation: A request for a page of virtual
memory was not fulfilled. The statement is
rejected.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next COIl'.mand.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
294
Explanation: The original Irodule name cannot
be located in the ISD for the link-edited
module. The operand is ignored.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAOA
Variable data supplied by: CZANW
CZAOA050 CANCELLED(PCS): 2 QUALIFICATION NAMES
NEEDED FOR LINK EDITED MODULE operand
Explanation: A reference is made to a
link-edited program module without
specifying the secondary qualifications.
The operand is ignored.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAOA
Variable data supplied by: CZANW
CZAOA060 CANCELLED(PCS): EXCESSIVE QUALIFICATION
IN operand
Explanation: Secondary qualification of a
non-link-edited module is specified. The
operand is ignored.
Filter code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAOA
Variable data supplied by: CZANW
Explanation: An impliCitly qualified internal
symbol is specified and a QUALIFY command
has not been issued. The operand is
ignored.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAOB
Variable data supplied by: CZANW
CZAOB020 CANCElLED(PCS): statement NOT EXECUTABLE
CZAOA070 CANCELLED (PCS) : VIRTUAL MEMORY NOT
AVAILABLE
Explanation: A request for a page of virtual
memory was not fulfilled. The statement is
rejected.
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAOA
Variable data supplied by: N/A
CZAOA080 CANCELLED(PCS): module name CANNOT BE
FOUND
Explanation: The return code of a FIND call is
not zero. This may occur when an LSD is
being retrieved. The operand is ignored.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAOA
Variable data supplied by: CZANW
CZAOA090 PROCEEDING(PCS): NO INTERNAL
DICTIONARY FOR module name
Explanation: An AT or BRANCH command was
entered, or a subscripted FORTRAN statement
number was encountered, directing control to
a non-executable statement. The statement
is ignored.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
system: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAOB
Variable data supplied by: CZANW
CZAOB030 CANCElLED(PCS): SYMBOL symbol CANNOT BE
FOUNt:
Explanation: A reference is made to an
internal symbol that is not defined in the
ISD for the qualifying object n,odule. The
operand is ignored.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
system: continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAOB
Variable data supplied by: CZANW
SY~JBOL
Explanation: Module referenced by QUALIFY
command has no internal symbol dictionary;
therefore, internal symbols are not
available.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12)
Requirement determined by: CZADA
Variable data supplied by: CZADA
CZAOB010 CANCELLED (PCS) : QUALIFICATION NEEDED FOR
operand
CZAOB040 CANCELLED (PCS) : STATEMENT statementno
CANNOT BE FOUND
Explanation: A reference is made to a FORTRAN
statement that is not defined in the ISD for
the qualifying object module, or to a PCS
statement number that either was never
assigned or has been removed previously.
The operand is ignored.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAOB
Variable data supplied by: CZANW
General Messages
295
CZAOB050 CANCELLED(PCS): DSECT SYMBOL symbol
REQUIRED FOR OFFSET
.?xplanation:
II reference is made to an
internal sYlrbol either named or clefined
wit,hin a DSEe'!'. The operand is ignored.
Fil·ter Code:
WSA
(:onyersationaJ,~£tion
User:
System:
N/A
Awaits next cOll'mand.
No~conversational
User:
Action
N/A
conti.uues processing •
Syst.em:
.!:,_§,.:ference Data (Also see Appendix B-19.)
Requirement determined by:
CZAOB
Variable data sUFplied ty:
CZANW
first was accepted; all others were rejected
with their statement numbers.
Filter code: WSA
~2riversationa 1 ~ctlg!}
User·: N/A
System:
Awaits next command.
~2!} conv ('ESC'! t. iQ!l~~~!:.i.Q!l
User:
N/A
System:
continues processing.
§y.stem Default Action:
Processing continues.
Reference Data
--Reguirement determined by:
CZAPB
Variable data supplied by:
CZAPB
Message residence:
CZAPI
Message issued by:
CZAPH
Destination
Conversational:
User's t.erminal
Nonconversdt:i.onal:
CZAOB060 CANCELLEIHPCS):
V:MHABLE IN operand
INVALID USE OF DUMMY
.!,xplaIl_~tion:
A FOH'rRAN dummy argument is used
in a range or with an offset.
The operand
is ignored.
Filter' Code:
WRA
f_<2n~Er,,~tion~Ll\cti2!1
User:
N/A
System: Awaits next corr~and.
Nonconversational Action
User:
N/A
SYG·tem:
Continues
Refer~p..£~J2~!:i!
proces~3ing.
(;,150 see Appendix B-19.)
Requirement determined by:
Vdl:iable data supplied by:
CZAOB
CZANW
Task.' s SYSOOT
1'ranslllit:tal technique:
CZAPB030 PROCEEDING (peS),
GATE
E::<:ECUTION CONTINUES AT
'Jymloc
.p')(i?!-j!~i~_!-..i'2I!:
PCS has d1 rected resuThption of
execution at thp specified symbolic location
after a STOP or· dynamic AT sta.tement,.
Filter Code: WSA
con_Y§~~ili52n~_~C tL.!oi2Il:
FIXED POINT OVERFLOW
The specified program
interrupi_ion occurred whilE evaluat.ing an IF
phrase.
Filter Code: WSA
cCILy.§'rs '!oilj.Jn'!]'-.-lic:t.i2Q
US'~l::
N/A
System: Processing continueB.
Default Action:
Processing continues.
Reference Data
Requirement determined by: CZAPM
Variable data sUFplied by:
N/A
Message residence:
CZAPI
Message issued by: CZAPH
Destination
Conversational:
User's terminal
Nonconversational:
Task's SYSOUT
Transmittal technique:
GATE
~t,em
CZAPM020 CANCELLED(PCS): EXPONENT DNDERFLO ..
.!\x.,lanatioI)= The specified prograrr,
interruption occurred while evaluatillg an IF
phrase.
Filter Code: WSA
COnversatiOnal Actior!
User:
N/A
System:
Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
§:y_':l}:em Default Action:
continues proce~,sing.
Reference Data
Requirement:s determined by:
CZAPM
Variable data supplied by: N/A
Message residence: CZAPI
!>1essage issued by:
CZAPH
Destination
Conversational:
User' £; terminal
Nonconversational:
Task's SYSOUT
'l'Tansmitt,al technique:
GATE
.Requirement determined by:
CZAPM
Variable data supplied by:
N/A
Message residence:
CZAPI
Message issued by:
CZAPH
Destination
Conversational:
User's terminal
Nonconversational:
Task's SYSOUT
'l.'ransmi ttal technique:
GATE
CZAPM050 CANCELLEDCPCS): FLOATING POINT D1VIDE
CHECK
Explanation:
The specifiel1 program
interruption occurred while evaluating an IF
phrase.
Filter Code: WSA
COn~,ional Action
Use.r:
N/A
SysteJII: Processing continues.
ponconversat:ional Action
User:
N/A
System:
processing cont.jnuEs .
.§y§..teII-Defaul t~~t~2!!:
Processing continues.
B~,!'.£~ce Dat~ (See also Appendix B-19.)
Heguirement. determined by:
CZAPM
Variable data supplied by:
N/A
Message residence: CZAPI
Message issued by:
CZAPH
Destinat:ion
Conver:sationa 1: User's terrr.inal
Nonccnversational: Task's SYSOUT
'l'ransmi·ttal technique:
GATE
CZAPl>'060 CANCELLEDCPCS): SIGNIFICANCE CHECK
CZAi'M030 CANCELLED (PCS) : FIXED POINT DIVIDE CHECK
ExJ2!..anatJ:Ql}!
The specified program
interruption occurred while evaluating an IF
phrase.
Filt.er Code:
WSA
Conversational Action
User:
N/A
System: Continues processinq ..
~~nc2nversational Ac!:ion
User:
N/A
System:
Continues Frocessing.
§~t:em Defaul~.£!:io.n:
Continues ixocessing.
Heference Data
Requirement determined by:
CZAPM
Variable data sUFplied ty:
N/A
Message residence:
CZAPI
Message issued by:
CZAPH
De~,tination
Conversational:
User's terminal
Nonconversational: Tabk's SYSOUT
Transmittal techruque:
GA'fE
EX.J:~...!lat~Q.~l:
The specified prog:r:am
interruption occurred while evaluating an IF
phrase.
Filter Code: WSA
Conversational Action
User:
N/A
System:
Awaits next COInn,and.
!'I2,nconversational Action
User:
N/A
System: Processinq continues.
eJL~Eel~-pefaul~~tio~:
processing continues.
Ref erence Da ta
---R-equLrernent determi.ned by:
CZAPM
Variable data supplied by:
N/A
Message residence:
CZAPI
Message issued by:
CZA.PH
lJe!,tinat.ion
Conversat: ional:
User' s terminal
Nonconversational:
Task's SYSOUT
Transmittal technique,
GA'f'E
CZAPM070 CANCELLED(l'CS): ADDRESSING ERROR OCCURHED
WHILE EVALUATING AN EXPRESSION
CZAPM040 CANCELJ,ED(PCS): EXPONEN'f OVERFLOW
Exp1i>nation:
The specified procp:aro
interrupt:ion occurred while evaluat.ing an IF
phrdse"
Fi.lter Code:
WS.l\
ConversatIOnal Action
"'--Uf;er:
N/A
System:
Await.s next command •
.1:l<.H]90nversaticna 1 ~tion
User:
N/A
Syst:em:
Processing continues.
§.y.§tE'JIl_Qefault_Acti9.ll'
ProceSSing continues.
£,,§.! eren.s:~_J;!atd
.J.::xplanat,:ion:
You entered dn eXf,ression that
caused a PCS-compiled subroutine to form an
address that: points to 1.U1assigned storage.
For example, QUALIFY PGM; DISPLAY
. ( . (A' SAVE'}) will cause PCS to assume t.ha t.
'''deh offset is an offse-L from PGN.
That is,
PCS will consldeJ:' the above equivalent to
DH;PLAY PGfI. (PGM. (A'SAVE'».
A large
o.ddresG will .result; usually it will bf'
unassigned ..
Filter Code:
WSA
f: cn~~E at io!!~.:!...lI,<;t i9!J
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAPM
Variable data supplied by: N/A
CZAPM080 CANCELLED(PCS): SPECIFICATION ERROR
OCCURRED WHILE EVALUATING EXPRESSION
Explanation: Specification error (program
interruption) occurred in a PCS-compiled
subroutine. For example, the expression IF
L'O'.(7R,2)=X'012' can cause this error if
7R contains a number not divisicle hy 2.
Filter Code: WSA
Conversational Action
User: N/A
system: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAPM
Variable data supplied by: N/A
CZAPN030 TERMINATED(PCS): PHRASE phrase TERMINATES
DYNAMIC STATEMENT
Explanation: The last phrase in a dynamic
statement is IF. AT, or GO, and the system
cannot interpret this phrase.
Filter Code: ISA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Processing continues.
System Default Action: Processing continues.
Reference Data
Requirement determined by: CZAPN
Variable data supplied by: CZAPN
Message residence: CZAPI
Message issued by: CZAPH
Destination
Conversational: User's terminal
Nonconversational: Task's SYSOUT
Transmittal technique: GATE
CZAPN040 CANCELLED(PCS): DUMMY ARGUMENT REFERENCED
CANNOT BE FOUND
CZAPNOI0 CANCELLED(PCS}: DIMENSION CHECK IN array
Explanation: The subscript to an array
referenced in an IF phrase is out of range.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next corrmand.
Nonconversational Action
User: N/A
System: continues processing.
System Default Action: Processing continues.
Reference Data
Requirement determined by: CZAPN
Variable data supplied by: CZAPB
Message residence: CZAPI
Message issued by: CZAPH
Destination
Conversational: User's terminal
Nonconversational: Task's SYSOUT
Transmittal technique: GATE
CZAPN020 TERMINATED(PCS): phrase PHRASE
Explanation: Previous diagnostic messages make
further processing of the command
impossible.
Filter Code:
ISA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Processing continues.
System Default Action: Processing continues.
Reference Data
Requirement determined by: CZAPN
Variable data supplied by: CZAPN
Message residence: CZAPI
Message issued by: CZAPH
Destination
Conversational: User's terminal
Nonconversational: Task's SYSOUT
Transmittal technique: GATE
298
Explanation: A dummy argument that has not
been replaced with actual argureent values
has been referenced. Reference is ignored.
Filter Code: WSA
Conversational Action
User: N/A
System: A~its next command.
Nonconversational Action
User: N/A
System: Processing continues.
Systerr, Default Action: Processing continues.
Reference Data
Requirement determined by: CZAPN
Variable data supplied by: N/A
Message residence: CZAPI
Message issued by: CZAPH
Lestination
Conversational: User's tern:inal
Nonconversational: Task's SYSOUT
Transmittal technique: GATE
CZAPN050 CANCELLED(PCS): DIMENSION CHECK IN
ARGUMENT
r;UM~Y
Explanation: A subscript to a durrmy argurrent
referenced in an IF phrase is out of range.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Systen: Default Action: ProceSSing continues.
Reference Data
Requirement determined by: CZAPN
Variable data supplied by: N/A
Message residence: CZAPI
Message issued by: CZAPH
Lestination
Conversational: User's terrr,inal
Nonconversational: Task's SYSOUT
Transmittal technique: GATE
CZAQAOI0 PROCEEDINGCPCS): QUALIFICATION IS BY
program name
Explanation: An internal symbol is qualified
explicitly by preceding it with the name of
the program in which it was defined. as:
pgm.label. The module must have 1::een
created with an internal symbol dictionary
(ISD) in order to reference internal
symbols. An internal symbol may be
qualified implicitly by issuing the command
QUALIFY with the program name as an operand.
Filter Cede: ISA
Conversational Action
User: N/A
System: Awaits next corr~and.
Nonconversational Aetion
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAQA
Variable data supplied by: CZAQA
CZAQA020 PROCEEDINGCPCS): NO QUALIFICATION, OR
QUALIFIED MODULE HAS NO ISD
Explanation: Qualified module has been
unloaded removing any qualification. or a
module has been qualified that has no
Internal Symbol Dictionary.
Filter Code: ISA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-19.)
Requirement determined by: CZAQA
Variable data supplied by: N/A
CZAQB010 CANCELLED(PCS): RANGE ADDRESSING ERROR IN
range--command CANCELLED
Explanation: A dynamically evaluated subscript
caused two symbols in a range to have
storage locations that are not in sequence.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Processing continues.
System Default Action:
Processing continues.
Reference Data
Requirement determined by: CZAQB
Variable data supplied by: CZAQX
Message residence: CZAQX
Message issued by: CZAQU
Destination
Conversational: User's terminal
Nonconversational: Task's SYSOUT
Transmittal teChnique: GATE
CZAQB020 CANCELLED(PCS): dataloc NOT
ASSIGNED--command CANCELLED
Explanation: An immediate or dynamic phrase
has caused reference to storage that has not
been assigned by a previous implicit or
explicit LOAD command.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconver sa tiona 1 Action
User: N/A
System: Processing continues.
Systerr, Default Action: Processing continues.
Reference Data
Requirement determined by: CZAQB
Variable data supplied by: CZAQX
Message residence: CZAQX
Message issued by: CZAQU
Destination
Conversational: User's terminal
Nonconversational: Task's SYSOUT
Transmittal technique: GATE
CZAQB030 CANCEILED(PCS): dataloc IN READ ONLY
STORAGE--SET CO~~AND CANCELLED
Explanation: An immediate or dynamic SET
phrase has made reference to storage that is
protected as read-only.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Processing continues.
System Default Action: Processing continues.
Reference Data
Requirement determined by: CZAQB
Variable data supplied by: CZAQX
Message residence: CZAQX
Message issued by: CZAQU
Destination
Conversational: User's terrrinal
Nonconversational: Task's SYSOUT
'Transmi ttal technique: GATE
CZAQB040 CANCELLED (PCS) : dataloc PROTECTED FROM
READING OR WRITING--command CANCELLED
Explanation: The user has attempted to access
an inaccessable area of storage.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data
Requirements determined by: CZAQB
Variable data supplied by: CZAQX
Message residence: CZAQX
Message issued by: CZAQU
Destination
Conversational: User's terminal
Nonconversational: Task's SYSOUT
Transmittal technique: GATE
CZAQB050 CANCELLEDCPCS): CSECT control section
name LOA LED IN module name
Explanation: FORTRAN common sections and
assembler cornmon CSECTs may be shared by
more than one module. The first rrodule
loaded that references the common CSECT has
that CSECT loaded with it. All subsequent
General Messages
299
modules that refer to the common CSECT are
connected to the already loaded CSECT.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data
Requirement determined by: CZAQB
variable data supplied by: CZAQX
Message .residence: CZAQX
Message issued by: CZAQU
Destination
Conversational: User's terminal
Nonconversational: Task's SYSOUT
Transmittal technique:
GATE
CZAQB060 CANCELLED(PCS): SET COMMAND EXTENDS
BEYOND END OF CSECT control section name
Explanation: The address generated for the
last byte of t.he SET command extends beyond
the last byte of the CSECT.
Filter Code: WSA
Conversational Actio~
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data
Requirement determined by: CZAQB
Variable data supplied by: CZAQX
Message residence: CZAQX
Message issued by: CZAQU
Destination
Conversational: User's terminal
Nonconversational:
Task's SYSOUT
Transmittal technique: GATE
CZAQB070 CANCELLED (PCS):
INVALID FOR DISPLAY
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAQB
Variable data supplied by: CZAQB
CZAQB110 CANCELLEDCPCS):
CONTROL SECTION
address IS IN A SYSTEM
Explanation: PCS found the address specified
to be in a control section which you are not
permitted to read.
Filter Code: WSA
Conversational Action
User: N/A
System:
Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
CZAQB
Variable data supplied by: CZAQB
CZASAOOO CANCELLED: COMMAND command HAS ILLEGAL
FORMAT
Explanation: The command was entered
incorrectly. There could be equal signs or
blanks or various punctuation marks embedded
within the command verb. For example,
JOB=NEW is invalid because an equal sign is
embedded within the command verb. Also, the
command verb cannot exceed eight characters.
Filter Code: WSA
Conversational Action
User: Enters command correctly.
System: Processing continues.
Nonconversational Action
User: N/A
System: Processinq continues.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASA
Variable data supplied by: CZASA
LENGTH VALUE OF 0
Explanation: The user specified a value of 0
for the DISPLAY command; this value is not
correct.
Filter Code: WSA
~onversational Action
User: N/A
Syst.em: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-I2.)
--Requirement determined by: CZAQB
Variabl.e data supplied by: N/A
CZASAIOO ILLEGAL COMMAND DURING DYNAMIC PROCESSING
Explanation: A command has been detected
during dynamic processing. (AT. IF), that
requires initiation of a preprocessor such
as one of the compilers. This command will
be ignored and should be removed.
Filter Code: WSA
Conversational Action
User:
N/A
System: Processing continues.
Nonconversational Action
User:
N/A
System: Processinq continues.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
CZASA
Variable data supplied by:
N/A
CZAQBIOO CANCELLEDCPCS): address NOT IN ANY
CONTROL SECTION
Explanation: PCS found that the addr·ess
specified was not contained in any control
section.
.Fil ter Code: WSA
~onversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Cont-.i nues processing.
300
CZASA200 CANCELLED: command INVALID COMMAND IN A
DYNAMIC STATEMENT
After an AT command, a dynamic
statement is being formed. The verb entered
is not a valid PCS verb.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
Explan~~ion:
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASA
Variable data supplied by: CZASA
CZASA300 CANCELLED: THE BUILTIN COM!I.AND PROCESSOR
COULD NOT LOAD accccccc
Explanation: The entry point referred to in
the BUILTIN could not be found in the
current JOBLIB chain or some other er.l:or
condition was encountered in loading the
module containing the entry point.
filter Code: WSA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: processing continues.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASA
Variable data supplied by: CZASA
CZASA400 CANCELLED: SYNONYM SEARCH ON VERB ENDED.
POSSIBLE LOOP
Explanation: A verb synonym was incorrectly
specified. For example, if you enter a verb
synonym A=B and then enter B=A, the synonym
verbs cannot be resolved and the command is
cancelled.
Filter Code: WSA
Conversational Action
User: N/A
System: processing continues.
Nonconversational Action
User:
N/A
System: processing continues.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASA
Variable data supplied by: N/A
CZASA500 CANCELLED: name HAS INCORRECT BPKD
POINTER
Explanation: The BPKD pointer supplied to the
system when the BUILTIN command was entered
is in error. Addresses or counts obtained
from this pointer will cause errors in
command execution.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASA
Variable data supplied by: CZASA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASA
Variable data supplied by: CZASA
CZASABOO INVALID PARAMETER POINTER :E'OR OBEY
INSTRUCTION
~ACRO
Explanation: The pointer supplied to the
system for the OBEY macro l.nstruction is in
error. Any processing based on this pOinter
will cause errors in command creation.
Filter Code: TAA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASA
Variable data supplied by: N/A
CZASABI0 UNEXPECTED RETURN CODE FROM DIR DURING
USATT PROCESSING
Explanation: An unexpected return code fxom
DIR has caused an early exit from the
Conmand Analyzer and Executor.
Filter Code: TAA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASA
Variable data supplied by: N/A
CZASA820 UNEXPECTED RETURN CODE FROM SIR DURING
CLATT PROCESSING
Explanation: An unexpected return code from
SIR has caused an early exit from the
Conmand Analyzer and Executor.
Filter Code: TAA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASA
Variable data supplied by: N/A
CZASB100 PROCEEDING: INPUT TRUNCATED TO 255 BYTES
CZASA600 PROCEEDING: NO PARAMETERS EXPECTED BY
name.
PARAMETERS IGNORED
Explanation: The BPKD expansion for this
command indicated that no parameters were
expected; hence, they were ignored and the
corrcrnand was executed.
Filter Code: WSA
Explanation: The maximum input after an
attention interruption is 255 bytes.
Filter Code: WSA
Ccnversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
General Messages
301
User: N/A
System: continues processing.
Reference Data (Also see A~pendix B-12.)
Requirement determined by: CZASB
Variable data supplied by: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASE
Variable data supplied by: N/A
CZASCOOO PROCEEDING:SYSIN REQUEST NOT PROCESSED
CZASB200 PROCEEDING: ATTENTION INTERVENTION
PREVENTED
Explanation: The attention interruption has
been prevented at this time by the program
in progress.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASB
Variable data supplied by: N/A
Explanation: The E marker points to the U
marker.
Filter Code: ISA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASC
Variable data supplied by: N/A
CZASEOOO CANCELLED: VMEREP COMMAND NOT AVAILABLE
TO YOUR PRIVILEGE
CZASB300 PROCEEDING: UNEXPECTED SIMULATED
ATTENTION
Explanation: A user-caused ATTN SVC
interruption was received which was not the
result of a prevented actual interruption
while the AlPS switch was set.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASB
Variable data supplied by: N/A
CZASB400 CANCELLED: STRING COMMAND ONLY VALID
IMMEDIATELY AFTER AN ATTENTION
Explanation: A request to display the
unexecuted comrrand string will only be
honored imrrediately after an attention
interrurtion.
F'ilter Code: VJSA
Conversational Aotion
User: N/A
system: Awaits next command.
Nonoonversat.ional Action
User: N/A
System: continues processing.
Reference Data (Also see Arpendix B-12.)
Requirement determined by: CZASB
VariaLle data supplied by: N/A
CZASB500 COMPLETED: NO COMMANI:S LEFT IN CURRENT
STATE~ENT
Explanation: The command string has been
exhausted.
Filter Code: WSA
Conversational Action
User: N/l\
System: Awaits next corrmand.
Nonoonversational Action
User: N/A
System: Continues processing.
302
Explanation: You must be privilege A or E to
run VMEREP.
Filter Code: WSA
Conversational Action
USer:
N/A
System: Awaits next command.
Nonconversational Action
USer: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASE
Variable data supplied by: N/A
CZASFOOO REGION NAME cccccccc TRUNCATED
Explanation: The region name entered by the
user is larger than the size specified in
the DCB key length and has been truncated.
cccocccc - hexidecimal input region na~e, a
range (area) within a data set
Filter Code: WSA
Conversational Action
User: N/A
Systew: processing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASF
Variable data supplied by: CZASF
CZASF100 REGION cccccccc FULL
Explanation: Line 9999999 has been reached.
Filter Code: WSA
Conversational Action
User: Enter next data line or new corrmand.
System: Restores current maximum N2 to zero
and issues message CZASF300 •.•
Nonconversational Action
User: Enter next data line or new cOIl'rrand.
System: Restores current rnaxirrum N2 to zero
and issues message CZASF300 ••.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASF
Variable data supplied by: CZASF
CZASF200 CANCELLED:
DATA SET HAS NO REGIONS
Explanation: No region is sFecified in the
key, indicating a line data set. If a
region name is entered, the prompt is given,
and control is returned to the user with no
data eXFected.
Filter Code: WSA
Conversational Action
User: Enter next command.
System: N/A
Nonconversational Action
User: Enter next command.
System: N/A
Reference Data (Also see AFpendix B-12.)
Requirement determined by: CZASF
Variable data supplied by: N/A
CZASF300 CURRENT LINE POINTER
=
CZASGOOO SYSTEM FAULT: DATA SET MAY BE DAMAGED
Explanation: A SYNAD exit has been taken.
Then the line numbers were found to be out
of sequence. No more data is expected for
the current command. You should list the
data set on which you were working.
Filter Code: WSA
Conversational Action
User: Enter next command.
System: N/A
Nonconversational Action
User: Enter next command.
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASG
Variable data supplied by: N/A
ccccccccnnnnnnn
Explanation: The current line numler is now
the indicated region name and line within
that region.
cccccccc - hexadecimal region name, a range
(area) within a data set
nnnnnnn - decimal current line number
Filter Code: ISA
Conversational Action
User: Enter next data line or command
preceded by underscore.
System: N/A
Nonconversational Action
User:
Enter next data line or command
preceded by underscore.
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASF
Variable data supplied by: CZASF
CZASFqOO CANCELLED: KEYLEN LESS TrlAN 7
Explanation: The data set key length is
invalid. Control is returned to the user
with no data eXFected.
Filter Code: WSA
Conversational Action
User:
Enter next command.
System: N/A
Nonconversational Action
User: Enter next command.
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASF
Variable data sUFFlied by: N/A
CZASF600 CANCELLED: INVALID FORM FOR INCREMENT
value
CZASG050 COMPLETED:
EXISTS
LINE line number ALREADY
Explanation: Existing lines cannot be overlaid
or interleaved exceFt by an eXFlicit
corrmand. The UPDATE command is suggested.
Filter Code: ISA
Conversational Action
User: N/A
System: Awaits next command.
Ncnconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASG
Variable data supplied by: CZASG
CZASGIOO CANCELLED:
EXISTS
LINE line number ALREADY
Explanation: The first line number already
exists in your current data set.
Your line
increment, when added to the second line
number exceeds the first line number.
No
more data 1oo/ill be accepted for the current
corrmand.
Filter Code: ISA
Conversational Action
User: Enter next command.
Should try
UPDATE command.
System: N/A
Nonconversational Action
User: Enter next comIrand.
System: N/A
Reference Data (Also see Appendix B-12.)
Reguirement determined by: CZASG
Variable data supplied by: CZASG
CZASG300 SYSTEM FAULT:
DATA SET 1'1AY BE DAMAGED
~lanation:
Explanation: Increment must be a 1 to 7 digit
decimal number.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
Systen,: continues Frocessing.
Reference Data (Also see AFFendix B-12.)
Requirement determined by: CZASF
Variable data sUFplied by: CZASF
A SYNAD exit has been taken, and
the new line was found to have an invalid
length. No more data is expected for the
current command.
Since your data set may
have been altered, you may wish to list it.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
General Messages
303
Requirement determined by:
Variable data supplied by:
CZASG400 CANCELLED:
THIS RECORD
CZASG
N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASG
Variable data supplied by: N/A
NO SPACE LEFT IN DATA SET FOR
Explanation: Your data set contains the
maximum 240 overflow pages. To clear your
data set of overflow pages, a copy data set
(CDS) command must be issued.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next corr~and.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASG
Variable data supplied by: N/A
CZASGSOO PROCEEDING: RECORD TRUNCATED AFTER
characters
Explanation: The maximum length allowed for an
individual record is specified in the LRECL
field of the DCB.
Your input data record
exceeds that maximum. Your record was
truncated to the LRECL value before
including it in the data set.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix E-12.)
Requirement determined by: CZASG
Variable data supplied by: CZASG
CZASG600 CANCELLED: LINE NUMBER EXCEEDS 9999999
Explanation: Your line number plus the
increment exceeded the maximum system value
of 9999999. Your command was cancelled.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next corrmand.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASG
Variable data supplied by: N/A
CZASG701 PROCEEDING: THE PREVIOUSLY-ACTIVE SCAN
ROUTINE HAS BEEN CANCELLED
Explanation: There is a system limitation of
one outstanding scan routine. The
previously-interrupted active scan routine
has been canceled.
Filter Code: ISA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASG
Variable data supplied by: N/A
CZASG800 PROCEEDING: LINE REJECTED. REENTER
Explanation: Scan routine passed return code 4
indicating that the line is rejected user
should reenter input line.
Filter Code: WSA
Conversational Action
User: Enters line again.
System: Awaits response.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASG
Variable data supplied by: N/A
CZASG801 PROCEEDING: LINE REJECTED
Explanation: Scan routine passed return code 8
indicating that the line is rejected.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASG
Variable data supplied by: N/A
CZASG802
TERMINATE~:
LINE REJECTED
CZASG700 PROCEEDING: DATA TRUNCATED
Explanation: Your input hexadecimal data is
not a multiple of two. The last input
character was ignored. The input data was
trucated to an even number of hexadecimal
digits.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next corr~and.
Nonconversational Action
User: N/A
System: Continues processing.
304
Explanation: Scan routine passed return code
12 indicating that line is rejected. Input
line is terminated.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASG
Variable data supplied by: N/A
Page of GC28-2037-7, Issued February 1, 1972 by TNL GN28-3209
CZASG900 CANCE:LLED: INVALID FORI' FOR INCREMENT
value
Explanation:
Increment must be a 1 to 7 digit
decimal mJlvber.
Filter Code:
WSA
Conversational Action
User:
N/A
S_y~,tem:
Awaits next command.
nonconversational Action
User:
N/A
System:
Continues processing.
Reference Data (Also see Appendix B-12.)
---Requirement determined by:
CZASG
Variable data supplied by:
CZASG
CZASHOOO CANCELLED:
INCREMENT value IS INVALID
Explanation:
The increment must be from
one-to-SE:ven numeric character-so
Filter Code:
WSA
~onversational Action
User:
N/A
System:
Awaits next command.
Nonconversational Action
User:
N/A
SYf,tem:
Continues processing.
Reference Data (Also see Appendix l:l-12.)
Requi rement determined by:
CZASH
Variable data supplied by:
CZASH
accccccc - alphameric ddname {define data)
name
fj_Iter Code: WSA
Conversational Action
User:
Reenter command.
System: N/A
Nonconversational Action
User:
Enter next comrr,and.
Systellit
N/A
Refe.rence Data (A_hio see Appendix B-12.)
Hequirement determined by:
CZASK
Variable data supplied by:
CZASK
CZASK036 CANCELLED: D-SNAME data set name HAS
INVALID FORM
Explanation:
The input data set name does not
meet, system st:andards or requirements, and
has been determihedto be invalid by CHERDS
(CZAAc2).
The command is cancelled.
Filter Code:
WSA
Conversational Action
User:
N/A
3yst
Awaits next command.
Nonconversational Action
~er:- N/A
SYGtelI1!
CO:ltinues processing.
~~L~re~ce D~~ (Also see Appendix B-12.)
Requirement determined by:
CZASK
Variable data supplied by:
CZASK
C2.ASKIOO CANCELLED: CANNO'r EXCERPT FROM NON-VISAM
DA'I'A SET
CZASJO'"
CANCELLED:
INCREMENT un IS INVALID
~~2J.9E,~tLcn:
FX),':1.ctDation:
Inc.rement
--,--,-Humeri
c--characters.
must be from 1 t') 1
!',:Uc!:~_~~od_",,:
XSA
5c~~?!l:y_e.! sa t t~a l_1'!~!:io!~
U~;er:
Syst:em:
N/A
Awaits next command.
ilglJ~qI)_1f ": r'§'':I,t:Lo_na ,L "i\~ l on
H::;pr.:
N/A
:::Y:TLen'!:
z.--'ontinu~:::. p:rocessing
..
(Also see Appendix B--12.)
deh>rmined !:'y, CZf1_SJ
da ta supplied by:
CZASJ
CANCELLED:
NOT EXCEED 9999999
cZt\~;JIOO
LINE NUMBER ,. INCREMENT MUST
A data set to be included is not
Control is
1:('turned to the user wit,h no data expected.
in Vl:iAM or VPAM format.
£:lA!_~~;:!"__code:
WSA
Conversational Action
U<;er:
Enter next command.
~;ystem:
N/A
N(;nconversational Action
-tlser: -Enter next command.
~;ystem:
N/A
Reference Data (Alse see Appendix B-12.)
------jleqiiirement determined by ~
CZASK
Variable data supplied by:
N/A
CZASKi',Q CANCELLED: INVALID FORM FOR Nl OR N2
~21anat~on:
q',ianati OJ}:
Ttlt- Ii ne number must not exceed
9999999.
I'lit ~ Code:
WSA
S:op_ E~J.:ion!!Lt?,ctio!!
U"-'P1':
N/A
System:
Awaits next command.
f:!Q_ll~2!''yersatcional__JI,ct-ion
Uspr:
N/A
System:
Continues processing.
tleference Data (Also see Appendi x B-12.)
- --- Hequi niment determinpd by:
CZASJ
Variable data supplied by: N/A
C),i\),)KOOO CANCELLED: DATA SET data set name DOES
Nl or N2 must be d 1 to 7-digi t
drecimal number, or N2 may be given as la~3t.
Filter Code:
WSA
c()r1versatIOn:~li value
Filter Code: WSA
Conversational Action
User: May enter another command.
System: Command ignored.
Nonconversational Action
User: May enter another command.
System: Command ignored.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASQ
Variable data supplied by: CZASQ
CZASQi05 CANCELLED: INVALID RANGE. N2 LESS THAN Ni
Explanation: Resolved line number N2 is less
than resolved line number Ni; range is
therefore invalid.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASQ
Variable data supplied by: N/A
CZASQ125 PROCEEDING:
REPLACED BY value
CORRECTION MARKERS value
Explanation: The correction markers which the
user supplied as input have replaced the
normal correction markers.
Filter Code: WSA
Conversational Action
Oser: N/A
System: Awaits next COIIIlIIand.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASQ
Variable data supplied by: CZASQ
CZASQ150 CANCELLED:
SPECIFIED
NON-DECIMAL STARTING COLUMN
Explanation: A non-decimal starting column
parameter was specified.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
CZASQ
Variable data supplied by: N/A
CZASQ200 CORRECTION MADE ALTHOUGH CORRECTION
CHARACTER MISSING
Explanation: A replacement line must be ended
with a (or equivalent marker).
Filter Code:
ISA
Conversational Action
User: May enter another command.
System: Ignores replacement line;
processing continues.
Nonconversational Action
User: May enter another command.
system: Ignores replacement line;
processing continues.
.Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASQ
Variable data supplied by: N/A
CZASQ400 CANCELLED: CORRECTED LINE EXCEEDS 4096
BYTES
Explanation: The maximum line length is one
page.
A line of greater length was entered.
Filter Code: WSA
Conversational Action
User: May enter another command.
system: Command ignored.
Nonconversational Action
User: May enter another command.
System: Command ignored.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASQ
Variable data supplied by: N/A
CZASQ450 CANCELLED: CHAR PARAMETER INVALID.
EE C, H, OR M
MUST
Explanation: Valid options for the CHAR
parameter are C for character, H for
hexadecimal, and M for mixed.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Ncnconversational Action:
User:
N/A
General Messages
313
system: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASQ
Variable data supplied by: N/A
Requirement determined by:
Variable data supplied by:
CZASQ
N/A
CZASQ900 TERMINATED: END OF RECORD REACHED BEFORE
END OF CORRECTIONS
CZASQ500 CANCELLED: LINE DOES NOT EXIST
Explanation: Either VISAM WRITE or VISAM GET
failed. The command cannot be processed.
Filter Code: WSA
Conversational Action
User: May enter next command.
System: Command ignored.
Nonconversational Action
User: May enter next command.
System: Command ignored.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASQ
Variable data supplied by: N/A
CZASQ600 CANCELLED:
RECORD
START COLUMN BEYOND END OF
Explanation: The correction characters
extended beyond the end of the data line.
Corrections have been terminated at the end
of the data line.
Filter Code: WSA
Conversational Action
User: N/A
System: A1Iiaits next command.
Nonconversational Action:
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASQ
Variable data supplied by: N/A
CZASQ945 PROCEEDING: DELETION MARKER, %.
FOLLOWING $ PROCESSING IS IGNORED
Explanation: The record ends short of the
starting column position that you have
specified.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next co~mand.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASQ
Variable data supplied by: N/A
Explanation: The deletion of the character
during hexadecimal processing would cause an
odd number of hexadecimal bytes.
Filter Code: ISA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASQ
Variable data supplied by: N/A
CZASQ700 PROCEEDING: DATA TRUNCATED TO RECORD
LENGTH IN DCB
CZASQ950 PROCEEDING: DATA TRUNCATED TO EVEN NUMBER
OF HEX DIGITS
Explanation: The input record length exceeded
the maximum record length (LRECL) specified
in the DCB. The input record was truncated
to the logical record length before it was
included in the data set.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action:
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASQ
Variable data supplied by: N/A
Explanation: Input hexadecimal data must be in
multiples of two. The last input character
in the input stream is ignored.
Filter Code: WSA
Conversational Action
User: N/A
System: A1Iiai ts next command.
Nonconversational Action:
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASQ
Variable data supplied by: N/A
CZASQ960 TWO CORRECTION CHARACTERS FOR SAME BYTE.
character IGNORED. character ACCEPTED
CZASQ800 CANCELLED:
REPLACEMENT LINE
INVALID HEX INPUT IN
Explanation: The replacement line consists of
character pairs for which there is no
hexadecimal representation.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
314
Explanation: Two control characters have been
specified for one byte of data. Two control
characters cannot be interpreted for one
byte of data. One is ignored and the other
accepted.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action:
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
Variable data supplied by:
CZASQ
N/A
CZASROOO LINE REPLACED
Explanation: Update of an existing line was
specified.
Filter Code: ISA
Conversational Action
User: May enter STET Command to nullify
last UPDATE Command, or may enter another
command.
System: Processing continues.
Nonconversational Action
User: May enter STET Command to nullify
last UPDATE Command, or may enter another
command.
System: processing continues.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAST
Variable data supplied by: N/A
CZASR100 CANCELLED: SYSTEM FAULT: POSSIBLE DATA
SET DAMAGE
EXplanation: An error occured while writing in
your data set. The command was cancelled.
The data set may be damaged or lost.
Filter Code: WSA
Conversational Action
User: It is suggested that the data set be
inspected for damage.
System: Awaits next command.
Nonconversational Action
User: N/A
System: The task is abnormally terminated.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASR
Variable data supplied by: N/A
CZASR200 PROCEEDING:
CZASR400 PROCEEDING: RECORD TRUNCATED AFTER
characters
EXPlanation: The maximum record length is
specified in the LRECL field of the DeB.
For the text or line number that you entered
the maximum length allowed is 120
characters. If your line number exceeds
9999999, the command was cancelled and is
Unchanged. List your data set to see if it
has been damaged. The last six characters
preceeding truncation are shown in the
message text.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action:
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASR
Variable data supplied by: CZASR
CZASR500 LINE KEY EXCEEDS SEVEN DIGITS.
LINE
REENTER
Explanation: The maximum key allowed by the
system is 9999999. The key that you entered
was greater than seven digits. The line was
ignored.
Filter Code: WSA
Conversational Action
User: Reenters line key.
System: Awaits next command.
Nonconversational Action:
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASR
Variable data supplied by: N/A
INPUT IGNORED
CZASR600 FOR EACH LINE ENTER LINE NUMBER AND DATA,
Explanation: The input data that you entered
must be preceded by a line number.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASR
Variable data supplied by: N/A
CZASR300 DATALINE IGNORED:
LINE NUMBER AND DATA
BLANK MUST SEPERATE
Explanation: The update was not performed
since the line number was not followed by
the required blank.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASR
Variable data supplied by: N/A
Explanation: For the UPDATE command, the user
must enter the number of the line and the
data which he wants to be placed in the data
set.
Filter Code: ISA
Conversational Action
User: Enters line number and data.
System: Awaits next command.
Nonconversational Action
User: N/A
system: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASR
Variable data supplied by: N/A
CZASR601 PROCEEDING: LINE REJECTED. REENTER
Explanation: Scan routine passed return code 4
or 8 indicating that the line is rejected.
User should reenter input line.
Filter Code: WSA
Conversational Action
User: Reenters line.
System: Awaits response.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
General Messages
315
Requirement determined by:
Variable data supplied by:
CZASR
N/A
CZASR602 PROCEEDING: LINE REJECTED; INPUT LINE IS
TERMINATED.
Explanation: SCAN routine passed return code
of 12 indicating that the line is rejected;
input line is terminated.
Filter code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASR
Variable data supplied by: N/A
CZASU150 CANCELLED:
Explanation: The NUMBER command processor has
received a specified or defaulted value for
its first line number parameter that is
greater than the value for its second line
number parameter, or there is no data in the
range. A data set cannot be numbered using
these values. The command is cancelled.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASU
Variable data supplied by: N/A
CZASU200 CANCELLED:
CZASR700 PROCEEDING: THE PREVIOUSLY ACTIVE SCAN
ROUTINE HAS BEEN CANCELLED
EXplanation: There is a system limitation of
one outstanding Scan routine. The
previously interrupted active Scan routine
has been canceled.
Filter Code: ISA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues Frocessing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASR
Variable data supplied by: N/A
CZASR800 CANCELLED: PROCESSOR MODE NEEDED
(E.G. EDIT)
Explanation: The last command entered needs an
active processor such as the Text Editor,
PCS, or one of the language processors.
First initiate the processor, then reissue
this command.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
system: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASR
Variable data supplied by: N/A
INVALID RANGE SPECIFIED
NO DATA FOUND AT N1
Explanation: Neither N1 nor N2 was entered.
The default (CLP) does not exist.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues with next
command.
Nonconversational Action
User: N/A
System: Next command read from SYSIN.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASU
Variable data supplied by: N/A
CZASU300 PROCEEDING:
nnnnnnn
COMPUTED INCREMENT IS
Explanation: If the value specified for INCR
causes the renumbering to overlap the
limiting line number, a new increment value
is computed, and renumbering continues.
nnnnnnn - decimal (line number) increment
value
Filter Code: WSA
Conversational Action
User: N/A
System: Continues processing command.
Nonconversational Action
User: N/A
SysteK: Continues processing command.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASU
Variable data supplied by: CZASU
CZASU400 CANCELLED:
NULL DATA SET
CZASU100 CLP NOW line number
EXplanation: The current line pointer is at
the indicated location.
Filter Code: ISA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASU
Variable data supplied by: CZASU
316
Explanation: The limiting line number was
defaulted and an EODAD occurred while
getting the limiting line. There is only
one line in the data set. The command is
ignored.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues with next
command.
Nonconversational Action
User: N/A
System: Next command read from SYSIN.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASU
Variable data supplied by: N/A
CZASU500 CANCELLED:
BASE NOT ALLOWED
Explanation: The first line to be renumbered
exists in the data set but is outside the
Nl/N2 range.
Fi Iter Code: WSA
Conversational Action
User: N/A
System: Processing continues with next
command.
Nonconversational Action
User: N/A
System: Next command read from SYSIN.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASU
Variable data supplied by: N/A
CZASU60u CANCELLED:
EXIST
REGION cccccccc DOES NOT
Explanation: All parameters were defaulted.
The current region was to be renumbered, but
the region does not exist in the data set.
The command is ignored.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues with next
command.
Nonconversational Action
User: N/A
System: Next command read from SYSIN.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASU
Variable data supplied by: CZASU
CZASU100 CANCELLED:
BASE INVALID
Explanation: The BASE must be specified as 1-1
numeric characters.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASU
Variable data supplied by: N/A
CZASU800 CANCELLED:
CZASU900 CANCELLED: N1/N2 RANGE WILL NOT FIT
BETWEEN BASE AND LIMITING LINE
Explanation: The difference between the
limiting line and the base, divided by the
total number of lines to be renumbered + 1,
is less than 1.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASU
Variable data supplied by: N/A
CZASU950 CANCELLED: SYNAD TAKEN ON DELREC. UNABLE
TO CONTINUE
Explanation: NUMBER took a SYNAD exit from a
DELREC.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASU
Variable data supplied by: N/A
CZASV100 TERMINATED: RECORD IN DELETION LIST
EXISTS IN DATA SET
Explanation: A SYNAD exit was taken when a
write with new key attempted to add a record
from the deletion list to the data set.
Filter Code: WSA
Conversational Action
User: N/A
system: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASV
Variable data supplied by: N/A
CZATEOOO PROCEEDING:
EQUAL 'QUOTED'
SYN/DEF NAME name ON LEFT OF
Explanation: SYNONYM or DEFAULT parameters to
the left of the equal sign may not be quoted
strings. The quotes are stripped off.
INCREMENT INVALID
Explanation: The user has specified an invalid
value for the increment.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZASU
Variable data supplied by: N/A
name - alphameric synonym or default value.
Filter Code: ISA
Conversational Action
User: N/A
System: command proceSSing continues after
issuing diagnostic.
Nonconversational Action
User: N/A
system: Command continues processing after
issuing diagnostic.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATE
Variable data supplied by: CZATE
General Messages
311
CZATE100 PROCEEDING:
PARAMETER name
TOO MANY EQUALS FOR
EXplanation: Only one parameter is allowed
following the equal sign in a parameter
string; either a PROCDEF parameter string or
in operand of SYNONYM or DEFAULT. If more
than one exists, the last one before a
delimiter other than an equal sign takes
precedence.
Filter Code: ISA
Conversational Action
User: N/A
System: Processing continues after issuing
diagnostic.
Nonconversational Action
User: N/A
System: Processing continues after issuing
diagnostic.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATE
Variable data supplied by: CZATE
CZATE150 PROCEEDING: OPERAND MAY ONLY HAVE THE
VALUE value. keyword IGNORED
Explanation: Keywords without value may not be
used except to specify the keyword as a
parameter. The specified value has been
supplied for the keyword without value.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATE
Variable data supplied by: CZATE
CZATE200 PROCEEDING:
PROCDEF
TOO MANY DUMMY PARAMETERS IN
Explanation: The maximum number of dummy
parameters allowed for the PROCDEF has been
exceeded. The excess parameters are
ignored, and processing continuEs.
Filter Code: ISA
Conversational Action
User: N/A
System: Command processing continues after
issuing diagnostic.
Nonconversational Action
User: N/A
System: COITIDand processing continues after
issuing diagnostic.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATE
Variable data supplied by: N/A
CZATE300 PROCEEDING: CALLING KEYWORD,name, DOES
NOT MATCH ANY DUMMY KEYWORD
Explanation: You have a keyword that does not
match any of those specified in the command
definition. The command is executed.
Filter Code: WSA
Conversational Action
User: N/A
System: processing continues after issuing
diagnostic.
318
Nonconversational Action
User: N/A
System: Processing continues after issuing
diagnostic.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATE
Variable data supplied by: CZATE
CZATE350 PROCEEDING: NO DUMMY PARAMETERS ON
PARAMETER LINE
Explanation: The first line of the procedure
being expanded contains the verb PARAM,
followed immediately by an end-of-block
(EOB) rather than any dummy parameters.
Filter Code: WSA
Conversational Action
User: N/A
System: Command processing continues after
issuing diagnostic.
Nonconversational Action
User: N/A
System: Command processing continues after
issuing diagnostic.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATE
Variable data supplied by: N/A
CZATE500 PROCEEDING: CALLING PARAMETERS EXCEED
NUMBER OF DUMMY PARAMETERS
Explanation: The number of calling parameters
entered exceeded the number of dummy
parameters in the PROCDEF. Any excess
parameters are ignored and processing
continues.
Filter Code: WSA
Conversational Action
User: N/A
System: Command processing continues after
issuing diagnostic.
Nonconversational Action
User: N/A
System: Command processing continues after
issuing diagnostic.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATE
Variable data supplied by: N/A
CZATE600 PROCEEDING:
PARAMETER
ERRONEOUS PROCEDURE
Explanation: Any error determined in the
parameter string of a PROCDEF, BUILTIN,
SYNONYM, or DEFAULT is reflected by this
diagnostic message.
Filter Code: WSA
Conversational Action
User: N/A
System: Command processing continues after
issuing diagnostic.
Nonconversational Action
User: N/A
System: Command processing continues after
issuing diagnostic.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATE
variable data supplied by: N/A
CZATE700 CANCELLED:
LIBRARY
PROCEDURE NOT IN PROCEDURE
Explanation: An entry for your procedure was
found in your combined dictionary, but the
procedure is not in the SYSPRO member of
that library defined in the dictionary
entry.
Filter Code: WSA
Conversational Actioll
User: N/A
System: Processing continues with next
c'ommand.
Nonconversational Action
User: N/A
System: Next command read from SYSIN.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATE
Variable data supplied by: N/A
CZATEBOO CANCELLED: ERRONEOUS PARAMETER STATEMENT
Explanation: The verb PARAM was followed by a
non-blank character or delimiter. Parameter
resolution could not take place.
Filter Code: WSA
Conversational Action
User: N/A
System: Co~~and cancelled.
Nonconversational Action
User: N/A
System: Processing continues with next
command.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATE
Variable data supplied by: N/A
CZATEB50 CANCELLED: SYNONYM SEARCH ON VERB
PARAMETER ENDED
Explanation: If a user issues a synonym
command for the verb PARAM in creating
PROCDEFs (i.e., SYNONYM A=PARAM) and then
reverses the synonym (i.e. SYNONYM
PARAM=A), the system will loop when an
attempt is made to execute a procdef. After
searching for synonyms 100 times, the
command is cancelled.
Filter Code: WSA
Conversational Action
User: N/A
System: Command cancelled.
Nonconversational Action
User: N/A
System: Processing continues with next
command.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATE
Variable data supplied by: N/A
CZATEB51 CANCELLED: SYNONYM LOOP DETECTED FOR
CALLING PARAMETER param
Explanation:
If a user issues a synonym
command for the verb PARAM in creating
PROCDEFs (i.e., SYNONYM A=PARAM) and then
reverses the synonym (i.e., SYNONYM
PARAM=A), the system will loop when an
attempt is made to execute a procdef. After
searching forsynonyrns 100 times, the
command is cancelled.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATE
Variable data supplied by: CZATE
CZATE852 CANCELLED: SYNONYM LOOP DETECTED FOR
PARAM LINE VALUE value
Explanation: If a user issues a synonym
command for the verb PARAM in creating
PROCDEFs (i.e., SYNONYM A=PARAM) and then
reverses the synonym (i.e., SYNONYM
PARAM=A), the system will loop when an
attempt is made to execute a procdef. After
searching for synonyms 100 times, the
corr~and is cancelled.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonoonversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATE
Variable data supplied by: CZATE
CZATE853 CANCELLED:
FOR ASCII
VOLUME ID SPECIFIED NOT VALID
Explanation: Either a comma or a right
parenthesis must follow the six-byte field
that begins with a quote-blank sequence
(i. e.. ASCII).
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATE
Variable data supplied by: N/A
CZATEB60 PROCEEDING: PARAMETER TRUNCATED TO 255
CHARACTERS
Explanation: TSS/360 allows parameters to have
lengths of any size up to 255 characters. A
parameter longer than 255 characters is
truncated on the right.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
system: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATE
Variable data supplied by: N/A
CZATE900 CANCELLED:
NO EXPANSION, PROCEDURE ERRORS
Explanation: The PREXPAND option has not been
defaulted to 'x'; therefore, the procedure
will not be executed with the errors
encountered during expansion.
General Messages
319
Filter Code: WSA
Conversational Action
User: N/A
System: Command cancelled.
Nonconversational Action
User: N/A
System: continues processing with next
command.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATE
Variable data supplied by: N/A
CZATFOOO CANCELLED:
ILLEGAL COMMAND
Explanation: A command name entered by the
user is not in the Command Table.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATF
Variable data supplied by: N/A
CZATF100 CANCELLED: OPERANDS EXCEED MAXIMUM
ALLOWABLE
Explanation: The operands of the command
exceed the maximum number of bytes
allowable.
Filter Code: WSA
Conversational Action
User: N/A
system: Processing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATF
Variable data supplied by: N/A
CZATH100 CANCELLED: COMMAND command name DOES NOT
EXIST IN USERLIB OR SYSLIB
Explanation: The KEYWORD processor operates
only on commands in a user"s USERLIB or
SYSLIB.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATH
Variable data supplied by: CZATH
CZATH200 CANCELLED: COMMAND MODULE ASSOCIATED WITH
command name IS NOT LOADED
EXplanation: The module associated with the
specified command name must be loaded before
parameter keywords can be retrieved.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
320
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATH
Variable data supplied by: CZATH
CZATH300 TERMINATED: SYSTEM FAULT (CZATB300)
Explanation: A SYNAn condition was encountered
on USERLIB(SYSPRO)
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATB
Variable data supplied by: N/A
CZATH400 CANCELLED: NO KEYWORD(S) EXIST.
Explanation: The command that was supplied has
no parameter keywords.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next. command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATH
Variable data supplied by: N/A
CZATH500 NEITHER VALID BUILTIN NOR PROCDEF FOUND
FOR THE FOLLOWING COMMAND
command
Explanation: The KEYWORD processor operates
only on commands contained in USERLIB or
SYSLIB.
Fil ter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATH
Variable data supplied by: CZATH
CZATI100 CANCELLED: CURRENT PASSWORD ENTERED IS
INVALID
Explanation: You have not specified your
current password as it actually exists. If
you do not have a current password, you must
default when prompted to avoid this message.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
Variable data supplied by:
CZATI
N/A
CZATI200 CANCELLED: NEW PASSWORD INVALID
Explanation: Your password must contain 1-8
alphameric characters. special characters
are permitted except for tab, comma,
backspace, percent sign, equal sign, or
parentheses.
Filter Code: WSA
Conversational Action
User: N/A
System: Awai ts next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATI
Variable data supplied by: N/A
CZATJ100 PRMPT MACRO IGNORED. PARAMETER POINTER
(GRD INVALID
Explanation: The parameter pointer for the
PRMPT macro instruction has not been set
correctly.
Filter Code: XSA
Conversational Action
User: N/A
System: Awaits next conunand.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATJ
Variable data supplied by: N/A
CZATJ200 PRMPT MACRO IGNORED. MESSAGE ID POINTER
INVALID
Explanation: The specified message ID does not
exist.
Filter Code: XSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATJ
Variable data supplied by: N/A
CZATJ300 PRMPT IGNORED. CALLER'S RESPONSE CODE
ADDRESS FOR MSGID identification IS INVALID
CZATJ~OO
PRMPT RESPONSE ADDRESS INVALID. RESPONSE
NOT RETURNED TO CALLING MODULE
Explanation: The User prompter has checked the
response address parameter passed to it by
the calling module, and found that the
parameter is invalid.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awai ts next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATJ
Variable data supplied by: N/A
CZATP001 CANCELLED: NAME NOT GIVEN
Explanation: The name is missing for the
PROCDEF or BUILTIN and the command is
ignored.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues with next
command.
Nonconversational Action
User: N/A
System: Next command read from SYSIN.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATP
Variable data supplied by: N/A
CZATP003 COMPLETED: PROCDEF DELETED, ALTHOUGH NOT
CREATED BY PROCDEF COMMAND
Explanation: In updating the combined
dictionary to process the current
transaction, the proper entry could not be
found. The next entry is processed.
Filter Code: ISA
Conversational Action
User: N/A
System: Command processing continues after
issuing diagnostic.
Nonconversational Action
User: N/A
System: Command processing continues after
issuing diagnostic.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATP
Variable data supplied by: N/A
CZATP004 CANCELLED: EXTNAME PARAMETER symbol MUST
BEGIN WITH ALPHABETIC CHARACTER
The external symbol on the BPKD
macro instruction must be 1 to 8 alphameric
characters, the first of which must be
alphabetic.
Filter Code: WSA
Conversational Action
User: N/A
system: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATP
Variable data supplied by: CZATP
~xplanaticn:
Explanation: A message identification was
passed to the User Prompter, but the message
cannot be found in SYSMLF.
Filter Code: XSA
Conversational Action
User: N/A
System: Awaits next corromand.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATJ
Variable data supplied by: CZATJ
General Messages
321
CZATP005 CANCELLED: NAME OR EXTNAME TOO LONG
Explanation: 'Ihe name or symbol for the
PROCDEF or BUILTIN is too long and the
command is ignored.
Filter Code: W$A
Conversational Action
User: N/A
System: processing continues with next
command.
Nonconversational Action
User: N/A
System: Next command read from SYSIN.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATP
Variable data supplied by: N/A
CZATP007 PROCEEDING: name NOT VALID BUILTIN OR
PROCDEF
Explanation: Line 0 of the region of SYSPRO
containing this BUILTIN or PROCDEF has an
invalid format.
Filter Code: ISA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATP
Variable data supplied by: CZATP
CZATP008 INVALID TO SPECIFY MEMBER
PROLlB NAME WITHOUT MEMBER
NA~E.
REENTER
Explanation: The member name for a PROCDEF
must be SYSPRO.
Filter Code: XSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATP
Variable data supplied by: N/A
CZATP009 PROLIB NAME INVALID.
REENTER
Explanation: The user-issued data set name
violates the syntax rules.
Filter Code: XSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATP
Variable data supplied by: N/A
CZATP019 CANCELLED: LINE 0 NOT FOR PROCDEF OR
BUILTIN
Explanation: The line 0 for the region
currently being processed is not formatted
for a PROCDEF or BUILTIN.
322
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATP
Variable data supplied by: N/A
CZATP020 CANCELLED:
INVALID CHARACTERS
PROCDEF/BUILTIN NAME CONTAINS
Explanation: The PROCDEF or BUILTIN name
cannot contain embedded blanks, commas,
semicolons, equal signs, or apostrophes.
Filter code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconver sa tiona I Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATP
Variable data supplied by: N/A
CZATP100 CANCELLED: SYSTEM FAULT
Explanation: FINDDS was unable tc create a
JFCB.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATP
Variable data supplied by: N/A
CZATP200 PROLIB MUST BE VPAM DATA SET.
REENTER
Explanation: The user-issued data set name is
not a virtual partitioned access method.
Therefore a SYSPRO member cannot be created.
Filter Code: XSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATP
Variable data supplied by: N/A
CZATP201 PROCEEDING: EXISTING BUILTIN name HAS
BEEN REPLACED
Explanation: A previous builtin existed in
member SYSPRO and has been replaced as a
result of the last BUILTIN command processed
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATP
Variable data supplied by: CZATP
CZATP202 PROCEEDING: EXISTING PROCDEF name HAS
BEEN OVERLAID
Explanation: The new PROCDEF has replaced the
old one in the specified SYSPRO member of
the VPAM data set.
Fi 1 ter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATP
Variable data supplied by: CZATP
CZATP300 CANCELLED: INCR VALUE NUMERICALLY
INCORRECT
Explanation: A valid value for INCR
(increment) is any number between 1 and
9999999.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATP
Variable data supplied by: N/A
CZATP400 CANCELLED: SYSTEM FAULT
Explanation:
DDEF returned a code of 80 to the
procedure definition, indicating a serious
error.
Filter Code: WSA
Conversational Action
User:
N/A
Sys~em:
Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see AFpendix B-12.)
Requirement determined by:
CZATP
Variable data supplied by:
N/A
CZATP500 CANCELLED: ATTENTION INTERRUPT
Explanation: The user cancelled the command by
depressing the attention key.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next corr~and.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATP
Variable data supplied by:
N/A
CZATP600 CANCELLED: NO SPACE AVAILABLE
Explanation: Whether on private pack or in
public storage, there is not enough room.
Fil ter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATP
Variable data supplied by:
N/A
CZATP700 CANCELLED: SYSTEM FAULT
Explanation: A SYNAD exit from GET was taken
while processing a SYSPRO member.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
CZATP
Variable data supplied by: N/A
CZATP800 CANCELLED: SYSTEM FAULT
Explanation: A VAM error occurred while
processing SYSPRD.
If the error perSists,
erase the SYSPRD member.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATP
Variable data supplied by: N/A
CZATP900 CANCELLED: UNABLE TO INITIATE PROCDEF
DUE TO AN OUTSTANDING LPC
Explanation: As long as there is an
outstanding language process control (LPC),
a procedure definition (PROCDEF) may not be
initiated.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATP
Variable data supplied by: N/A
CZATROOl PROCEEDING: MORE THAN 8 CHARACTERS IN
parameter--PARAMETER IGNORED
Explanation: The term of a SYNONYM command
parameter or operand of a DEFAULT command
parameter may be one to eight characters in
length; a greater length will cause the
General Messages
323
whole parameter to be ignored.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
system: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATR
Variable data supplied by: N/A
CZATSOOl CANCELLED:
DSNAME data set name INVALID
Explanation: The data set name, qualifier, or
member name is too long (exceeds eight
characters) or does not consist of
alphameric characters, the first of which
must be alphabetic.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATS
Variable data supplied ~y: CZATS
CZATS002 CANCELLED:
DDEF !'ACRO)
SYSTEM FAULT (RC=code FROM
Explanation: The edit would not continue
because the data set cannot be defined by
the DDEF command, due to the reason
indicated by the return code. For a
complete list of the return codes, see
Assembler User Macro Instructions,
Gc28-2004.
Filter Code: WSA
Conversational Action
User: The user's action depends on the
return code received.
System: Awaits next command.
Nonconversational Action
User: N/A
System: The task is abnormally terminated.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATS
Variable data supplied by: CZATS
CZATS004 CANCELLED:
INVALID FORMAT
DATA SET SPECIFIED HAS
Explanation: The data set key length (KEYLEN)
must equal 7 for a line data set, and be
greater than 7 but less than 245 for a
region data set. The record format (RECFM)
may be fixed or variable, but the relative
key position (RKP) must equal 0 if the
format is fixed, and equal 4 if the format
is variable.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
324
Requirement determined by:
Variable data supplied by:
CZATS
N/A
CZATS005 DEFAULTS SUPPLIED FOR MISSING PARAMETERS
EXplanation: The default values for missing
DCB parameters are: RKP=4, RECFM=V,
KEYLEN=REGSIZE+7, LRECL=132 (for line data
set when REGSIZE=Oi if REGSIZE=O, the region
data set LRECL=256).
Filter Code: ISA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATS
Variable data supplied by: N/A
CZATS006 CANCELLED
Explanation: You replied N (no) to the request
to cancel the currently active EDIT command,
with a new EDIT command. The EDIT command
just entered is cancelled.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data
Requirement determined by: CZATS
Variable data supplied by: N/A
CZATSOI0 CANCELLED: REGSIZE VALUE NUMERICALLY
INCORRECT
Explanation: A valid REGSIZE value is any
number between 0 and 254.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATS
Variable data supplied by: N/A
CZATS011 CANCELLED: BASE VALUE NUMERICALLY
INCORRECT
Explanation: A valid base value is any number
between 0 and 9999999.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATS
Variable data supplied by: N/A
CZATS013 PROCEEDING: REGSIZE IS INVALID FOR THIS
DATA SET AND WILL BE IGNORED
Explanation: The REGSIZE value with which this
data set was created and the current REGSIZE
value (specified by default or parameter)
are not equal. The original value will
replace the current value.
Filter Code: WSA
conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATS
Variable data supplied by: N/A
CZATS014 CANCELLED: RNAME SPECIFIED FOR A LINE
DATA SET
EXplanation: A I ine data set contains no
regions. RNAME parameter is valid for a
region data set only.
Filter code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATS
Variable data supplied by: N/A
CZATS015 PROCEEDING: SPECIFIED REGSIZE VALUE WILL
BE IGNORED
Explanation: The REGSIZE value for any VI
member named SYSMLF or SYSPRO must be S.
The current REGSIZE value (specified by
default or parameter) will be ignored and a
value of S will be used.
Filter Code: ISA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATS
Variable data supplied by: N/A
CZATSIOO CANCELLED: A DSNAME MUST BE SPECIFIED
Explanation: The data set name of the data set
to be edited, a required parameter, was not
entered.
Filter Code: WSA
Conversational Action
User: May re-enter EDIT Command, or any
command not a part of the Line Editor
function.
System: Command ignored.
Nonconversational Action
User: May re enter EDIT Command, or any
command not a part of the Line Editor
function.
System: command ignored.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
Variable data supplied by:
CZATS
N/A
CZATS200 CANCELLED: DSNAME acccCccc GREATER THAN
35 CHARACTERS
Explanation: The maximum length of a data set
name is eight bytes. A longer name was
entered.
accccccc - alphameric ddname (define data)
name
Filter Code: WSA
Conversational Action
User: May re-enter EDIT Command, or any
command not a part of the Line Editor
function.
System: Command ignored.
Nonconversational Action
User: May re-enter EDIT command, or any
command not a part of the Line Editor
function.
System: Command ignored.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATS
Variable data supplied by: CZATS
CZATS201 CANCELLED:
ATTENTION INTERRUPT RECEIVED
Explanation: The DDEF macro sent a return code
of X'OC' indicating that an Attention
interruption was received while the DDEF
macro was processing.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATS
Variable data supplied by: N/A
CZATS202 CANCELLED:
VOLUME COULD NOT BE MOUNTED
Explanation: The DDEF macro sent a return code
of X'1C' indicating that the volume on which
the user's data set resides could not be
mounted.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data:
(Also see Appendix B-12.)
Requirement determined by: CZATS
Variable data supplied by: N/A
CZATS203 CANCELLED:
DATA SET
NO SPACE AVAILAELE FOR YOUR
Explanation: The DDEF macro sent a return code
of X'20' indicating that insufficient space
was available for the user's data set.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
General Messages
325
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATS
Variable data supplied by: N/A
CZATS204 CANCELLED:
SPECIFIED
NON-EXISTENT GENERATION NAME
Explanation: The DDEF macro sent a return code
of X'14' indicating that the user specified
a non-existent generation name.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
system: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATS
Variable data supplied by: N/A
CZATS205 CANCELLED:
DSNAME NOT FULLY QUALIFIED
Explanation: The specified data set name is
missing one or more qualifiers (a return
code of 18 has been received following
processing of the DDEF macro instruction).
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATS
Variable data supplied by: N/A
CZATS300 CANCELLED: MEMBER accccccc GREATER THAN 8
CHARACTERS
Explanation: The maximum length of a member
name is eight bytes. A longer name was
entered.
accccccc - alphameric member name
Filter Code: WSA
Conversational Action
User: ~ay re-enter EDIT Command, or any
command not a part of the Line Editor
function.
System: Command ignored.
Nonconversational Action
User: May re-enter EDIT command, or any
command not a part of the Line Editor
function.
System: command ignored.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATS
Variable data supplied by: CZATS
CZATS400 CANCELLED: SYSTEM FAULT
Explanation: The DDEF was successful, but the
JFCB created could not be found and the EDIT
command could not continue.
Filter Code: WSA
Conversational Action
326
User: May re-enter EDIT Command, or any
command not a part of the Line Editor
function.
System: command ignored.
Nonconversational Action
User: May re-enter EDIT Command, or any
command not a part of the Line Editor
function.
System: Command ignored.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATS
Variable data supplied by: CZATS
CZATS500 CANCELLED: dsname INCORRECT DATA SET
ORGANIZATION
Explanation: The data set specified is not
partitioned (VPAM) or indexed sequential
(VISAM) •
Filter Code: WSA
Ccnversational Action
User: May re-enter EDIT Command, or any
command not a part of the Line Editor
function.
System: Command ignored.
Nonconversational Action
User:
May re-enter EDIT Command, or any
command not a part of the Line Editor
function.
system: Command ignored.
Reference Data (Also see Appendix B-12.)
Re~lirement determined by:
CZATS
Variable data supplied by: CZATS
CZATS600 CANCELLED: dsname IS NEW AND READ ONLY
Explanation: The data set specified is new and
contains new data. There are no lines to te
listed and no data may be added because of
READ ONLY access.
Filter Code: WSA
Conversational Action
User: May re-enter EDIT Command, or any
command not a part of the Line Editor
function.
System: Command ignored.
Nonconversational Action
User: May re-enter EDIT Command, or any
command not a part of the Line Editor
function.
System: Command ignored.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATS
Variable data supplied by: CZATS
CZATS700 CANCELLED:PARTITIONED DATA SET NEEDS
~EMBER NAME
Explanation: The EDIT command will only
process on index sequential members of a
partitioned data set. A member name must te
specified.
Filter Code: WSA
Ccnversational Action
User:
May re-enter EDIT Command or any
command not a part of the Line Editor
function.
System: Command ignored.
Nonconversational Action
User: May re-enter EDIT COIf,mand or any
command not a part of the Line Editor
function.
System: Command ignored.
Reference Data (Also see Appendi~ B-12.)
Requirement determined by: CZATS
Variable data supplied by: CZATS
CZATsaoo CANCELLED: MEMBER accccccc IN dsname
INCORRECT
Explanation: The member name specified is not
index sequential.
Filter Code: WSA
Conversational Action
User: May re-enter EDIT Command, or any
command not a part of the Line Editor
function.
System: Command ignored.
Nonconversational Action
User: May re~enter EDIT Command, or any
command not a part of the Line Editor
function.
System: C0mmand ignored.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATS
Variable data supplied by: CZATS
CZATS900 CANCELLED:MEMBER NAME NOT FOUND
EXplanation: CZATS cannot find the
user-specified input member name.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATS
Variable data supplied by: N/A
CZATS901 PROCEEDING: DATA SET IS READ ONLY
Explanation: You may read from this data set
but you may not change it.
Filter code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Noncon~ersational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATS
Variable data supplied by: CZATS
CZATS950 CANCELLED:SPECIFIED REGSIZE IS GREATER
THAN MAXIMUM ALLOWED(244)
Explanation: The user-specified region size is
greater than the limit of 244.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATS
Variable data supplied by: N/A
CZATU100 PARAMETER (parameter) SPECIFIED
INCORRECTLY AND IGNORED
Explanation: The parameter specified for the
MCAST processor has been entered
incorrectly.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZATU
Variable data supplied by: CZATU
CZAVBOOO CANCELLED: INVALID NUMBER OF MINUTES
Explanation: The interval for the TIME command
must be from 1 to 450 minutes.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAVB
Variable data supplied by: N/A
CZAVB100 INTERVAL SET BY TIME COMMAND HAS ELAPSED
Explanation: Task execution time has
accumulated to the limit set by the last
TIME command (or system value default).
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAVB
Variable data supplied by: N/A
CZAVB200 EXECUTION TIME LIMIT FOR EXPRESS SUBTASK
REACHEr;
~xplanation:
The express subtask execution
time has reached the specified time limit
that has been set.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAVB
Variable data supplied by: N/A
CZAVB300 IGNORED:
INVALID NUMBER OF MINUTES
Explanation: An invalid time has been
specified. A value from System Common has
been used to set the Express Clock.
Filter Code: WSA
General Messages
327
Conversational Action
User: N/A
System: Continues processing.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAVB
Variable data supplied by: N/A
CZAVR100 CANCELLED:
SYSTEM
*CZAWA*
Explanation: Self-explanatory.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (See Appendix B-25.)
USERID NOT JOINED TO THIS
Explanation: A userid has been specified that
is not in the user table.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAVR
Variable data supplied by: N/A
CZAVR200 CANCELLED:
YOUR AUTHORITY
VSS COMMAND NOT AVAILABLE TO
Explanation: Users with Authority Class
cannot issue the VSS command.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAVR
Variable data supplied by: N/A
CZAVR300 CANCELLED: YOUR TASK IS NOT
CONVERSATIONAL
Explanation: VSS is not supported for
background tasks.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZAVR
Variable data supplied by: N/A
*CZAWA*
ABEND CAUSED BY DIR.
Explanation: Self-explanatory_
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (See Appendix B-25.)
328
ABEND CAUSED BY SIR.
·u·
*CZAWA*
ABEND COUNT EXCEEDS LIMIT.
Explanation: Self-explanatory_
Ccnversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (See Appendix B-25.)
*CZAWA* ABEND PROCESSOR CANNOT FIND JFCB FOR
SYSCAT - BIO TERMINATED
Explanation: A job being processed by BULKIO
abended and BULKIO attempted to free the
associated catalog interlocks. However, no
catalog JFCB could be found.
Conversational Action
User: N/A
System: BULKIO task terminated.
Nonconversational Action
User: N/A
System: N/A
Reference Data (See Appendix B-25.)
*CZAWA*
ITSELF
BULKIO TASK UNABLE TO SIR FOR VSEND to
Explanation: CZAWS cannot SIR for a VSEND.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data
Requirement determined by: CZAWA
Variable data supplied by: CZAWA
Message residence: CZAWS
Message issued by: CZAWM
Destination: Operator's Terminal and system
log
Transmittal technique: WTL macro.
*CZAWA*
BULKIO TASK UNABLE TO SIR TIMER.
Explanation: CZAWS cannot SIR the real timer.
Ccnversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data
Requirement determined by: CZAWT
Variable data supplied by: CZAWT
Message residence: CZAWT
Message issued by: CZAWM
Destination: Operator's terminal and system
log
Transmittal technique:
*CZAWA*
WTL macro
BULKIO TASK REMOVED FROM SYSTEM
Explanation: An unrecoverable ABEND condition
has been encountered. The above message
comes from the Terminal Condition Routine of
CZAWA, the BOLKIO task (taskid 0002) ABEND
Recovery Processor.
conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (See Appendix B-25.)
*CZAWA* CZCMD SYSLIB DCB INVALIDLY OPENED - BIO
ABORTED.
EXplanation: The DCB used by SETUR to access
the SYSURS and SYSOCS data sets is found
open after an abend in BULKIO.
Conversational Action
User: N/A
System: BULKIO task aborted.
Nonconversational Action
User: N/A
System: Same as for Conversational Action,
above.
Reference Data (See Appendix B-25.)
*CZAWA* DSN=dsname UID=userid JOB TERMINATED.
SDA=sda CLOSED AND RELEASED.
Explanation: An MSAM abend has occurred on a
PUNCH or PRINT job.
Conversational Action
User: N/A
System: Job aborted. Device released.
Nonconversational Action
User: N/A
System: Same as for Conversational Action,
above.
Reference Data (See Appendix B-25.)
Explanation: CZAWA was unable to indicate to
the Batch Monitor that an output job had
abended.
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: Same as for Conversational Action,
above.
Reference Data (See Appendix B-25.)
*CZAWA* ERROR RELEASING VAM INTERLOCKS.
ACTION TAKEN.
Explanation: Error while releasing interlocks
on user's VAH dataset, encountered in the
Release VAM Interlocks routine of CZAWA, the
BULKIO task (taskid 0002) ABENI: Recovery
Processor.
conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (See Appendix B-25.)
*CZAWA* ERROR REMOVING VAM DATASEr. RE-ENTER
CARDS FOR THIS USER WITH ANOTHER DATASET NAME.
Explanation: The above message comes from the
VAN Erase routine of CZAWA, the BULKIO task
(taskid 0002) ABEND Recovery Processor.
That routine could not erase a
partially-built dataset read from the card
reader after an ABEND condition occurred.
The dataset is thus not guaranteed and
should be re-entered with a different dsnaroe
on the DATASET card.
conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (See Appendix B-25.)
*CZAWA*
*CZAWA* DSN=dsname UID=userid RELEASE RC=return
code vam/msam.
Explanation: An MSAM abend has occurred on an
output job being processed by BULKIO. The
data set or device could not be RELEASEd by
CZAWA.
Conversational Action
User: N/A
System: A manual release will be attempted.
The JFCB will be removed from tbe TDT
chain and CZCAD will be called to mark
the SDAT entry available. Processing
continues.
Nonconversational Action
User: N/A
System: Same as for Conversational Action,
above.
Reference Data (See Appendix B-25.)
*CZAWA.*
FAILED.
DSN=dsname UID=userid VSEND TO BATCH MON
RC=return code.
NO
FAILURE RELEASING ESA INTERLOCKS.
Explanation: The above message comes from the
Release ESA Interlocks routine of CZAWA, the
BULKIO task .
System: Program will loop indefinitely. A
full virtual memory dump of task 0002
should be taken to determine the problem.
Reference Data (See A~pendix B-25.)
*CZAWZ* USERID=userid, SDA=sda, SID=integer.
LOGOFF OR ENDDS CARD. PROCESSING CONTINUES.
Explanation: SYNAn error following VISAM PUT.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: The data set being built is
Reference Data (See Appendix B-25.)
*CZAWZ* USERID=userid, SDA=sda, SID=integer.
PERMANENT ERROR FROM MSAM. READ CARDS (CZAWZ) JOB
ABORTED.
Explanation: Permanent I/O error on card
reader indicated by return code 8 from MSAM
"GET" macro.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: Data set being built is erased and
card reader generating the error is
deleted from the BULKIO task.
Reference Data (See Appendix B-25.)
*CZAWZ*
RC=g~r15
USERID=userid, SDA=sda, SID=integer.
return code contents.
SIR
Explanation: CZAWZ unable to enable card
reader for asynchronous interrupts.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User:
N/A
System: The BULKIO task is removed from the
system. This condition causes an ABEND.
Reference Data (See Appendix B-25.)
NO
Explanation: LOGON or DATASET card detected
before the LOGOFF or %ENDDS card for the job
in progress in the card reader.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: Card reader job in progress is
completed without a LOGOFF or ENDDS card.
Reference Data (See Appendix B-25.)
*CZAWZ* USERID=userid, SDA=sda, SID=integer.
OUTPUT DCB ORGANIZATION NOT VSAM OR VISAM.
Explanation: Data set origin not VSAM or VISAM
in output DCB.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
*CZAWZ* USERID=userid, SDA=sda, SID=integer.
UNABLE TO COMPLETE FINISH OPERATION. CARD READER
REMOVED. CZAWZ ABORTED.
Explanation: Trouble with card reader hardware
or MSAM.
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User: N/A
System: The data set being built is erased
and the card reader is removed from the
BULKIO task.
Reference Data (See Appendix B-25.)
*CZAWZ* USERID=userid, SDA=sda, SID=integer.
WAITING FOR INPUT OR %ENDDS OR LOGOFF CARD
Explanation: A data set is being built and the
card reader detects end-of-file (no cards).
Conversational Action
User:
N/A
General Messages
339
System: N/A
Nonconversational Action
User: N/A
System: Processing is suspended until input
is received.
Reference Data (See Appendix B-25.)
CZBSEOOl CANCELLED: BASE VALUE NUMERICALLY
INCORRECT
Explanation: A valid base value is any number
between 0 and 9999999.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
system: continues processing.
Reference Data (Also see AFpendix B-12.)
Requirement determined by: CZBSE
Variable data supplied by: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
CZBTB
Variable data supplied by: N/A
CZBTB301 PROCEEDING:
PROCDEF/BUILTIN name
INVALID HEADER LINE FOR
Explanation: The header line (line 0> contains
more than three parameters. No dictionary
entery has been made.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues.
Ncnconversational Action
User: N/A
System: Processing continues.
Reference Data (Also see Appendix B-12,)
Requirement determined by:
CZBTB
Variable data supplied by: N/A
CZBSE200 DATA SET KEY HAS INVALID FORM
Explanation: The last seven characters of the
key must be numeric.
Filter Code: WSA
Conversational Action
User:
Enter next command.
System: Continues processing.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see AFpendix B-12.)
Requirement determined by:
CZBSE
Variable data supplied by: N/A
CZBSE300 PROCEEDING: CLP CANNOT BE UPDATED SINCE
n2 + 100 EXCEEDS 9999999
Explanation: If the last line number (n2) +
100 is greater than 9999999, the current
line pointer will not be incremented. The
data set is open, and all text editor
commands which do not attempt to add lines
past the maximum line number will be
allowed.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZBSE
Variable data supplied by: CZBSE
CZBTB302 PROCEEDING:
PROCDEF
verb NOT VALID BUILTIN OR
Explanation: The specified verb is neither a
PROCDEF nor BUILTIN, and therefore will not
be added to the combined dictionary.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZBTB
VariaLle data supplied by:
CZBTB
CZBTB303 CANCELLED: PROFILE MEMBER (SYSPRX) DOES
NOT EXIST
Explanation: SYSPRX was not found on SYSLIB or
USERLIB, where it should be.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZBTB
Variable data supplied by: N/A
CZBTE305 PROCEEDING: PROCDEF DICTIONARY MEMBER
(SYSPRD) DOES NOT EXIST
CZBTBI0l PROCEEDING: UNABLE TO INVOKE SYSTEM
ATTENTION INTERRUPT PROCESSOR
Explanation: Return code from SIR of system
attention handler indicated attention
handler not invoked for this task.
Filter Code: "'SA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
340
Explanation: SYSPRD was not found on SYSLIB.
Filter Code: WSA
Conversational Action
User: N/A
System:
Processing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZBTB
variable data supplied by: N/A
Page of GC28-2037-1, Issued February 1, 1972 by TNL GN28-3209
CZBTB8()O USERLIB(SYSPRD) INVALID FORMAT
Explanation: Verification performed on the
SYSPRD member of USERLIB indicates that the
member cannot be used to build the combined
dictionary.
Filter Code: TAA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZBTB
Variable data supplied by: N/A
CZBTBS01 USBRLIB(SYSPRX) INVALID FORMAT
Explanation: Verification performed on the
SYSpRX member of USERLIB indicates that the
member cannot be used to build the combined
dictionary.
Filter Code: TAA
Conversational Action
User:
N/A
System: Awaits next command.
!'Ig!!Gonversational A.ction
User:
N/A
System: continues processing.
Retel:ence Data (Also see Appendix 8-12.)
Requirement determined by: CZBTB
V,u:iable data supplied by: N/A
value great.er than the length of the member
itself.
Filter Code: 'l'AA
ClJflversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZBTB
Variable data supplied by: N/A
CZBTB805 ERROR ENCOUm'ERED TRYING TO REFORMAT
USERLIB(SYSPRX)
Explanation: An invalid return code from STOW
was received while reformatting the SYSPRX
member of USERLIB.
(The reformatting
operation was required to achieve
compatibilit.y wit.h the new system SYSPRX.)
Filter Code: 'I'M
£on.Y.'E.!-'~~_tional Action
User:
N/A
,5ystcem: Awaits next command.
NonconvQ!2~tional Action
User:
N/A
Syst~~:
Continues processing.
J{eference Data (Also see Appendix B-12.)
Requirement determined by: CZBTB
Variable data supplied by: N/A
CZ8TBH06 UNSUCCESSl"UL FIND ON USERLIB(SYSPRD)
1'~"'.I!J"''!!9..!:ton:
A FIND command was issued t.O open
SYSPRD member of USERLIB, but the FIND
processor returned a code indicating failure
(X'OS', X'OC', or X'10').
Filter Code: TM
Conversational Action
IJser: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Refez-ence D~ta (Also see Appendix B-12.)
Requirement determined hy: CZBTB
Variable data supplied by: N/A
L),e
CZBT802 READ PAST END OF' SYSPRX DIC'l'IONARY
Explanatiof): While processing SYSLIB{SYSPRX),
an EO DAD exit was taken during a Sf."T1.
ope.l:·ation.
}~'ilt.er
Code:
'I'M
~:9n;;ersDULE (name) NOT UNLOADED.
OUTSTANDING REFERENCES.
ExplanatIon: The named module coulri not be
unloaded while doing an ERASh, RELEASE, or
DELETE of the lihra.ry from which the module
was loaded.
General Messages
341
Page of GC28-2037-7. Issued February 1, 1972 by TNL GN28-3209
Filter Code:
ISA
Conversational Action
User:
N/A
:iysterr: Awaits next conunand.
.~onc(Jnversational Action
User:
N/A
System: Cont.inues processing.
Reference Data (Also see Appendix B-12.)
_. Requiremerlt determined by: CZCCD
Variable data supplied by: CZCCD
CZCDLOOl PROCEEDING: SYMBOL symbol IN LIBRARY
library name NOT OBJECT MODULE OR ENTRY POINT
Explanation:
The dynamic loader did a 'FIND'
on the above library.
The user information
in the POD did not meet the requirements of
all object modules.
If the module was
produced by a language processor, try
running the processor again.
Filter Code: WSA
~onversational
CZCDL004 CSECT control section name IN MODULE
module nCime REJEcrED-ILLEGAL j,'ORM OF CSECT NAME
The control section name
specified has violated a naming restriction •
For example, a non-system control section
name may not begin with the characters SYS.
For a complete li~t of naming restrictions,
see Assembler Pr~anuner's Guide, Order No.
GC28-2032.
Filter Code: WSA
Conversational Action
User:
N/A
system:
Cont_inues processing.
Nonconversational Action
User: N/A
.
system: Continues processing.
Reference Data (Also see Appendix B-29.)
Requirement determined by: CZCDL
Variable data supplied by:
CZCDL
~~.Elanation:
CZCDL005 PROCEBDING: MODULE module name PRODUCED
WITH LEVEL lev01 ERRORS
Actio~
User:
N/A
System:
continues processing.
Nonc_onversational Action
Uc>er:
N/A
System: Continues processing.
Reference Data (Also s~e Appendix 8-29.)
--R";-:quin,ment. determined by:
CZCDL
Variable data supplied by:
CZCDL
CZCDL(Y'? C\NCELLED: SYMBOL symbol TO BE nnnnED NOT
FOUND
Explanation: The Dynamic Loader found that the
specified module was produced with either
level 1 (minoL') or level 2 (major) errors.
Filter Code: WSA
Conversational Action
User:
N/A
system: Continues processing.
Nonconversational Action
User:
N/A
System:
Continues processing.
Reference Data (Also see Appendix B-29.)
Requirement determined by:
CZCDL
V;c;ridble data supplied by:
CZCDL
~L}..Lter Code:
WSA
C :ii:,rer~sdtional A:::t:ion
User:
N/A
SystcFn:
continues processing.
~!.2n~().~w'L~sat.lonal Action
tLier:
N/A
System: Continues processing.
Heference Data (Also see Appendix B-29.)
_.. _.. Requirement determined by: CZCDL
Variable data supplied by:
CZCDL
C:l.CDI.003 m'DEFINED REF reference IN MODULE module
l1i,me.
ADDRESS FFFFFOOO ASSIGNED
CZCDL006 PROCEEDING: PUBLIC CSECT control section
name,MODULE module name.
UNRESOLVED ADCONS
~L'!..nation:
The Dynamic Loader has
encountered a text page within a public
control section that has address constants.
Since adcons on public csect pages are not
allowed, the adcons on this page will not be
relocated if the user decides to proceed.
Filter Code: WSA
Conversational Action
User: N/A
~ystem:
Continues processing.
Nonconversational Action
User:
N/A
system:
Continues processing.
Reference Data (Also see Appendix 8-29.)
Requirement determined by:· CZCDL
Variable data supplied by: CZCDL
~xplanation:
The symbol indicated can not be
defined for this task.
It does not exist in
the libraries searched, exists in the wrong
hash table, or was contained in a rejected
csect. A nonreferable segment and page
address has been assigned.
Filter Code: WSA
~9nversational Action
U'3er:
N/l\
Syst.em: continues processing.
~!QD<2Qnversational Action
User:
N/A
System: Continues proceJii;sing.
Reference Data (Also see Appendix B-29.)
---Rt~quirement determined by:
CZCDL
Variable data supplied by: CZCDL
CZCDL007 PROCEEDING: COI-'..PLEX DEF symbol IN MODULE
module name DEFINED AS COMPLEX DEF symbol, MODULE
module name
Explanation: The first complex external symbol
definit.ion (DEF) indicated in the diagnostic
message has an external symbol reference
(REF) to the second DEF indicated in the
message.
The second DEF is defined in
another module at the time the reference is
made.
The warning is issued even though the
REF is properly satisfied. Should the two
modules that cQntain the REF and DEF be
link-edited. attempts to load the combined
Page of GC28-2031-7, Issued February 1, 1972 by TNL GN28-3209
module will result in message CZCDL008 for
ha t same REF.
Filter Code: WSA
Conversational Action
User:
N/A
System: continues processing.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-29.)
Requirement determined by: CZCDL
Variable data supplied by: CZCDL
t
CZCDL008 PROCEEDING: REF symbol IN MODULE module
name REFERS TO UNDEFINED COMPLEX DEF,MODULE module
name
Explanation: One possible situation which
might produce this diagnostic message is as
follows: module A ~as a complex external
symbol definition (DEF), R, which has an
external symbol reference (REF) to some
symbol.
There is discovered some REF which
refers back to complex DEF R, still
undefined.
Filter Code: WSA
Conversational Action
User:
N/A
System: continues processing.
Nonconversational Action
User:
N/A
~;yst_em:
continues processing.
Hei",;rence Data (Also see Appendix B-29.)
----;~cquirement determined by:
CZCDL
Variable data supplied by:
CZCDL
(:'l('DL009 PROCEEDING: MODULE module name IS
'ILLEGAL
I
\ DUPLICATE
STANDARD ENTRY POINT Nor
r•
CZCDL01.1. CANCELLED: LIBRARY SEARCH ERROR FOR
symbol
Explanation: The loader used the FIND function
of VPAM to 10cate symbols in the external
libraries.
If FIND is called to locate the
specified symbol and returns a code
indicating some error, this message is
issued.
Filter Code: WSA
Conversational Action
User:
N/A
System: Continues processing.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-29.)
Requirement determined by: CZCDL
Variable data supplied by: CZCDL
CZCDL012 PROCEEDING: ILL.EGAL ENTRY NAME name IN
MODULE module name
~ldnaL~,on:
This diagnostic message arises
from:
(ll An SYSxxxxx symbol appearing in a
nonsystem control section, or (2) a reserved
system name has been specified.
Filter Code: WSA
Conversational Action
User:
N/A
System: Continues processing.
Nonconversational Action
------u::~er:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-29.)
Requirement determined by:
CZCDI.
Variable data supplied by: CZCDL
CZCDI,013 PROCEEDING: ENTRY POINT name,MODOLE
module name DUPLICATES CSECT NAME IN MODULE module
name
DEFINED
Expl~lDatigQ:
The specified module name is
either illegal or a duplicate. A standard
(~ntry poi nt, is not defined.
FilU~r Code:
WSA
Conversational Action
---Usei:
N/A
System: Continues processing.
~2!1conversational Action
User:
N/A
System: continues processing.
t(efeI"l"nce Data (Also see Appendix B- 29.)
--,- Requirement det.ermined by: CZCDL
VariaLl c' data supplied by: CZCDL
Explanation: The named entry point dupll_cates
an existing entry point name.
The new ent.ry
point is rejected.
Filter Code: WSA
Conversational Action
User: N/A
System: Continues processing.
Nonconversational Actio~
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-29.)
--'Requirement determined by: CZCDL
Variable data supplied by: CZCDL
CZCDL014 PROCEEDING: CSECT name IN MODULE module
CZCDL010 UNNAMED CSECT ASSIGNED PRIVATE STORAGE
[Aj
Unable to assign public storage
unnamed CSECT. The loader aSSigned
vat,(> storage.
F ij,!.2 .t___ r"c) c}.':" :
WSA
cO!lVeL~~tcic!Yial Action
USE',;:-:
N/A
System: Continues processing.
Nonconversdtional Action
--User:
N/A
System: continue Frocessing.
Reference Dat_a (Also see Appendix B-29.)
Requirement determined by: CZCDL
Variable data supplied by: N/A
name REJECTED,DUPI.ICATE F;N'l'RY POINT IN MODULE
module name
Explanation: The loader has rejected the
control section because the CSECT name
already exist~s in t_he DEF chain as an entry
point (not a CSECT name).
Filter Code: WSA
COI1versa tiona I Acti on
User:
N/A
System: Continues processing.
Nonconversational Action
User: N/A
System: continues processing.
R~.fer<-:nG_?_ Dat.a (Also see Appendix B-29.)
General Messages
343
Page of GC28-2037-7, Issued February 1, 1972 by TNL GN28-3209
Requirement detErmined ty:
Variable' data supplied by:
CZCDL
CZCDL
PROCEEDING: LENGTH OF REJECTED CSECT
name. MOUULE modu Ie name EXCEEDS LOADED CSECT OF
MODULE module namp
CZCDL01~
~!hl!:c~!2Il:
Possibly a storage protection
error.
Filte!:.....l!~
User:
N/A
Syst.em:
conti nues processing.
'c'!r;Conversational Action
User:
N/A
'~:nt: '··m:
continues processing.
i NOT FOUND
ARGUMENT SYMBOL FOR DELETE
Explanation: The unloader is unable to find
the symbol in the TDY. Symbol is that
symbol that occurred in the operand field of
either an assembled DELETE statement or a
command syatem UNLOAD. This is issu.ed by
UNLINK (CZCDU1) and is accompanied by a
return code of four.
Filter Code: WSA
Conversational Action
User: N/A
System: continues processing.
N()nconversational Acti.::m
User: N/A
System: N/A
Reference Data (Also see Appendix B-12.}
Requirement determined by: CZCDUl
Variable data supplied by: CZCDUl
General Messages
3QS
CZCDU002 CANCELLED: MODULE DEFINING SYMBOL
(symbol) NOT UNLOADED-OUTSTANDING REFERENCES
CZCENOOl PROCEEDING: VOLUME volume identification
HAS n:Vl\.LID PAT.
NO SPACE ALLOCATIONS PERMITTED
~lanation:
The primary deletion candidate;
i.e., the module that contains the symbol
$01 named in a DELETE macro instruction or
UNLOAD statement was not, in fact, unloaded
because of outstanding implicit references,
remaining to that module after the candidate
list was constructed.
Accompanied by a
return code of eight.
Filter Code: WSA
Conversational Action
User:
N/A
System:
Continues processing.
Nonconversational Action
User:
N/A
System:
N/A
Reference Data
Requirement determined by: CZCDU1
Variable data supplied by: CZCDUl
Expl?nation:
The page assignment table (PAT)
for the specified volume is invalid.
Contact your installation and request
assistance.
Filter Code: TSA
Conversational Action
User:
N/A
System:
Awaits next command.
Nonconversational Action
User:
N/A
System:
Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
CZCEN
Variable data supplied by:
CZCEN
CZCEQOOl PROCEEDING: VOLUME volume identification
HAS INVALID PAT.
NO SPACE ALLOCATION ALLOWED
CZCEI - RECOVERY FROM ERROR TO DUPLEX DS CHAR.
FQN-
qq
E~Elanation:
~~El-_anation:
A page allocation table validity
check has failed.
Filter Code:
TSA
Conversational Action
User:
N/A
~oystem:
Awaits next command.
Nonconver:sational Action
Use.L":
N/A
System~
Continues processing.
B~feren(~~Data (Also see Appendix B-12.)
Reqni.:t (~ment determined by:
CZCEQ
Variable dat.a supplied by: CZCEQ
NOI~~:~~~rs~tional Action
----.US-;;;r:---n:
;:>ystem: None
Reference Data
Requirement determined by: CZCEI
Variable data supplied by: CEAAQ
Message residence: CZCEI
Message issued by:
CZCEI
Destination: Operator's console
Transmittal technique:
WTO
Explanation: This notifies system operator
that a page of a data set is failing but
system was able to recover.
Conversational Action
User:
None
System:
None
CZCEKOOl PROCEEDING: VOLUME volume identification
HAS INVALfD PAT.
NO SPACE ALLOCATIONS PERMITTED
The page assignment table (PAT)
for the specified volume is invalid.
Contact your installation and request
assistance.
Filter Code: TSA
"fOriversational Action
User:
N/A
Sy::;tem: Awaits next command.
NoncoIlVprsational Action
7 j\---------
U;-:; 1,048,576
Explanation: The logical record length
(DCBLRE) as specified in the DCB is greater
than the maximum allowed for a VSAM data set
(maximum=1048576 bytes or one segment).
Filter Code: WSA
Conversational Action
User: N/A
System: Continues processing.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCOP
variable data supplied by: N/A
CZCOSOOl TERMINATED:ATTEMPTED PUT WITH READ ONLY
ACCESS,DCB CLOSED
Explanation: The user does not have proper
access to the data set to change it.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing_
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCOS
Variable data supplied by: N/A
CZCOP002 CANCELLED: RECFM IS NOT F,V, OR U IN DCB
CZCOS002 CANCELLED: INVALID DCB
Explanation: The record format as specified in
the DCB must be one of the following:
(1)
fixed-length (all records are of the same
length), (2) variable-length (each record
may be of a different length), or (3)
undefined (record lengths are page
multiples) •
Filter Code: WSA
Conversational Action
User: N/A
System: continues processing.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCOP
Variable data supplied by: N/A
Explanation: The pointer in the RESTBL
DCBHEADER does not point to a recognizable
DCB. The DCB may have been overlayed or may
not be open.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCOS
Variable data supplied by: N/A
CZCOS003 TERMINATED: RECORD LENGTH EXCEEDS MAXIMUM
SPECIFIED, DCB CLOSED
CZCOP003 CANCELLED
OF 4096
RECFM=U , LRECL NOT MULTIPLE
Explanation: If the record format is specified
in the DCB as undefined (format-U), the
logical record length (DCBLRE) in the DCB
must be specified as a multiple of a page
(4096 bytes)_
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
364
Explanation: The record length specified in
the corrmand exceeds the maximum record
length previously specified.
Filter Code: WSA
Conversational Action
User: N/A
Sy stem: Awaits next cOJllIlland.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCOS
Variable data supplied by: N/A
CZCOS004 CANCELLED: RECFM=U,LRECL NOT MULTIPLE OF
4096
Explanation: A VSAM PUT was attempted
specifying RECFM=U and a record length not a
multiple of 4096.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCOS
Variable data supplied by: N/A
CZCOS005 CANCELLED: PREVIOUS RECORD LENGTH EXCEEDS
MANIMUM:DCB CLOSED
EXplanation: A VSAM PUT was attempted
specifying a record length greater than the
maximum allowed.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCOS
Variable data supplied by: N/A
CZCOS006 TERMINATED: V FORMAT RECORD LENGTH
lDCB CLOSED
< 4
EXplanation: The record to be PUT is less than
four bytes.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCOS
Variable data supplied by: N/A
CZCOS007 TERMINATED: V FORMAT RECORD LENGTH < 4 ON
PREVIOUS PUT:DCB CLOSED
Explanation: The last record to be PUT had a
record length of less than four bytes.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCOS
Variable data supplied by: N/A
CZCOUOOl TERMINATED:
ONLY DATA SET
ATTEMPTING TO CHANGE READ
Explanation: A PUTX was attempted on a
read-only data set; read/write access is
required.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCOU
Variable data supplied by: N/A
CZCOVOOl TERMINATED: SYSTEM FAULT.
CANCELLED, DCB CLOSED (CZCOV001)
MACRO
Explanation: Meaningless return code from
CZCOD (INS/DEL).
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCOV
Variable data supplied by: N/A
CZCOV002 TERMINATED: NO EXTERNAL STORAGE: MACRO
CANCELLED: DCB CLOSED
Explanation: No storage remains on which to
expand this data set.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awai ts next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCOV
Variable data supplied by: N/A
CZCOV003 TERMINATED: STORAGE RATION
EXCEEDED: MACRO CANCELLED: DCB CLOSED
Explanation: The RCR ration was exhausted.
Filter Code: WSA
Conversational Action
User: N/A
System: A-.;ai ts next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCOV
Variable data supplied by: N/A
CZCOV004 TERMINATED: NO SECONDARY ALLOCATION
SPECIFIED: DCB CLOSED
Explanation: Primary allocation has been
exhausted and no secondary allocation was
specified.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
365
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCOV
Variable data supplied by: N/A
CZCOV005 TERMINATED:SYSTEM LIMIT: DCB CLOSED
Explanation: The maximum shared data set size
was exceeded. The shared POD/RESTBL cannot
be expanded.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCOV
Variable data supplied by: N/A
CZCOV006 TERMINATED:SYSTEM LIMIT, DCB CLOSED
Explanation: Maximum data set/member size has
been exceeded.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCOV
Variable data supplied by: N/A
CZCOV007 TERMINATED:SYSTEM FAULT (CZCOV007)
Explanation: An attempt was made to insert a
page number outside the data set.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCOV
Variable data supplied by: N/A
CZCOV008 TERMINATED:SYSTEM FAULT (CZCOV008)
Explanation: An attempt was made to delete
pages from a point outside the data set.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
CZCOV
Variable data supplied by: N/A
CZCOXI00 CANCELLED: NO DSNAME
Explanation:
Filter Code:
366
The DSNAME operand is missing.
WSA
Conversational Action
User: N/A
System:
processing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data
Requirement determined by: CZCOX
Variable data supplied by: N/A
Message residence: SYSMLF
Message issued by: CZCOX
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmi ttal technique: PRMPT
CZCOX200 CANCELLED: INPUT OPTION ERROR
Explanation: An error was found in either the
data or alias option.
Filter Code: WSA
Conversational Action
User:
N/A
System: Processing continues.
Nonconversational Action
User:
N/A
System: Processing continues.
Reference Data
Requirement determined by: CZCOX
Variable data supplied by: N/A
Message residence: SYSMLF
Message issued by: CZCOX
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique:
PRMPT
CZCOX300 CANCELLED: DATA SET DOES NOT EXIST
Explanation: No catalog entry was found for
the data set.
Filter Code: WSA
Ccnversational Action
User:
N/A
System: processing continues.
Nonconversational Action
User:
N/A
System: processing continues.
Reference Data
Requirement determined by: CZCOX
Variable data supplied by: N/A
Message residence:
SYSMLF
Message issued by: CZCOX
Destination
Conversational:
User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique:
PRMPT
CZCOX400 CANCELLED: DSNAME NOT FULLY QUALIFIED
Explanation: Data set name entered is not a
fully qualified name.
Filter Code: WSA
Conversational Action
User:
N/A
system: Processing continues.
Nonconversational Action
User:
N/A
System: Processing continues.
Reference Data
Requirement determined by: CZCOX
Variable data supplied by: N/A
Message residence: SYSMLF
Message issued by: CZCOX
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmi ttal technique: PRMPT
CZCOX500 CANCELLED:THIS DATA SET CANNOT BE SHARED
Explanation: User does not have sharing access
to this data set.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data
Requirement determined by: CZCOX
Variable data supplied by: N/A
Message residence: SYSMLF
Message issued by: CZCOX
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: PRMPT
CZCOX600 CANCELLED: DATA SET NOT PARTITIONED
Explanation: Data set organization is not
virtual partitioned.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data
Requirement determined by: CZCOX
Variable data supplied by: N/A
Message residence: SYSMLF
Message issued by: CZCOX
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: PRMPT
CZCOX100 CANCELLED: DDEF FOR THIS DATA SET
UNSUCCESSFUL
Explanation: A JFCB could not be created,
perhaps because a mount request was refused,
or a SECURE card was missing in a batch job.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCOX
Variable data supplied by: NZA
CZCOX701 CANCELLED:
PACK NOT MOUNTED
Explanation: The user has requested a pack
that is not currently mounted.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCox
Variable data supplied by: N/A
CZCOX702 CANCELLED: NO SPACE AVAILABLE
Explanation: Virtual storage required for
POD? processing is not available at present.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: czcox
variable data supplied by: N/A
CZCOX800 CANCELLED: INVALID DSNAME
Explanation: A bad return code was received
from CHEKDS.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User:
N/A
System: Processing continues.
Reference Data
Requirement determined by: CZCOX
Variable data supplied by: N/A
Message residence: SYSMLF
Message issued by: CZCOX
Destination
Conversational: User'a Terrrinal
Nonconversational: Task SYSOUT
Transmittal technique:
PRMPT
CZCOX950 CANCEL1·ED: NO MEMBERS IN THIS DATA SET
Explanation: The user has issued a
POD? command against a data set that has no
members.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCOX
Variable data supplied by: N/A
CZCOX960 CANCELLED:SYSTEM FAULT
Explanation: POD? validates fields in the POD
against corresponding fields in the RESTBL.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
367
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCOX
Variable data supplied by: N/A
CZCOX910 CANCELLED:SYSTEM FAULT FOR MEMBER name
Explanation: POD? validates fields in POD and
RESTBL but they do not agree with POM
fields.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCOX
Variable data supplied by: CZCOX
CZCPAOOl TERMINATED: PUT ATTEMPTED, BUT DCB NOT
OPEN FOR OUTPUT
Explanation: A PUT was attempted on a data set
that has not been opened for output.
Filter Code: WSA
Conversational Action
User: N/A
system: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPA
Variable data supplied by: N/A
CZCPA002 TERMINATED: MORE THAN ONE DCB OPEN FOR
OUTPUT
Explanation: When more than one DCB is open
for output, PUTS are not allowed.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPA
Variable data supplied by: N/A
CZCPA003 TERMINATED: ATTEMPTED SYNAD - NO SYNAD
ADDRESS IN DCB
Explanation: A SYNAD address was not specified
in the DCB.
Filter Code: WSA
Conversational Action
User: N/A
System: Continues processing.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPA
Variable data supplied by: N/A
368
CZCPA004 TERMINATED:
ONLY DATA SET
ATTEMPTING TO CHANGE READ
Explanation: A PUT was attempted on a
read-only data set. Read/write access is
required to change a data set.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
ReqUirement determined b}: CZCPA
Variable data supplied by: N/A
CZCPA005 TERMINATED:
SYNAn ON FINAL PUT
Explanation: During CLOSE processing, PUT
(CZCPA) detected a SYNAn error condition.
Filter Code: XSA
Conversational Action
User: N/A
system: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
variable data supplied by: CZCPA
Variable data supplied by: N/A
CZCPA006 TERMINATED:
BYTES DURING PUT
RECORD LENGTH EXCEEDS 4000
Explanation: A record's length field contained
a value greater than 4000.
Filter Code: XSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPA
Variable data supplied by: N/A
CZCPA001 TERMINATED:
MAXIMUM DURING PUT
RECORD LENGTH EXCEEDS
Explanation: A record's length field (first
four bytes) contained a value greater than
the length field in the DCBLRE field of the
data control block (DCB).
Filter Code: XSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPA
Variable data supplied by: N/A
CZCPBOOl TERMINATED: ATTEMPTED EODAD - NO EODAD
ADDRESS IN DCB
Explanation: An EODAD address was not supplied
in the DCB.
Filter Code: WSA
Conversational Action
User: N/A
System: Continues processing.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPB
Variable data supplied by: .N/A
Filter Code: WSA
Conversational Action
User: N/A
System: cc=l ABEND
Nonconversational Action
User: N/A
System: cc=l ABEND
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPE
Variable data supplied by: N/A
CZCPEOOII CANCELLED: WRITE ATTEMPTED WITH READ ONLY
ACCESS. DCB CLOSED
CZCPB002 TERMINATED:
PROCESSING
SYSTEM ERROR DURING GET
Explanation: A meaningless return code was
passed to CZCPB (GET) from CZCPT.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPB
Variable data supplied by: N/A
Explanation: The user cannot alter a data set
that has been opened for reading only.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Ncnconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPE
Variable data supplied by: N/A
CZCPEOOS CANCELLED: DELETE ATTEMPTED WITH READ
ONLY ACCESS, DCB CLOSED
CZCPC003 TERMINATED: ATTEMPTED SYNAD - NO SYNAD
ADDRESS IN DCB
Explanation: A SYNAD address was not supplied
in the DCB.
Filter Code: WSA
Conversational Action
User:
N/A
system: continues processing.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPC
Variable data supplied by: N/A
Explanation: The user cannot alter a data set
when he holds read only access.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPE
Variable data supplied by: N/A
CZCPE006 TERMINATED: SYSTEM FAULT (CZCPE006)
CZCPE002 CANCELLED: PRIVILEGED DATA SET NOT
ACCESSIBLE TO NON-PRIVILEGED ROUTINES
Explanation: Certain data sets in the system
are protected by having a privilege assigned
to them. These data sets may not be used by
routines which have a lower privilege.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPE
Variable data supplied by: N/A
CZCPE003 TERMINATED:
ADDRESS IS DCB.
ATTEMPTED SYNAD - NO SYNAD
Explanation: A READ or WRITE macro instruction
has been executed and a SYNAD condition
detected.
Since no SYNAD address exists in
the data control block, CZCQK is calling for
an ABEND.
Explanation: The status of your data set is in
question.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPE
Variable data supplied by: N/A
CZCPE007 TERMINATED: CONFLICTING INPUT TO WRITE
MACRO INSTRUCTION
Explanation: Value in key field, and key in
record (input for WRITE wacro instruction)
do not match.
Filter Code: XSA
Conversational Action
User: N/A
system: Awaits next command.
Nonconversational Action
User: N/A
system: Continues processing.
369
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPE
variable data supplied by: N/A
CZCPIOOl TERMINATED: SYSTEM FAULT (CZCPI001)
Explanation: The page number of the request
was outside the data set.
Fi Iter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPI
Variable data supplied by: N/A
CZCPI002 TERMINATED: SYSTEM FAULT (CZCPI002)
Explanation: The page number of the insert was
outside the data set.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPI
Variable data supplied by: N/A
CZCPI003 TERMINATED: ATTEMPTED SYNAD-NO SYNAD
ADDRESS IN DCB
Explanation: A GETPAGE encountered a SYNAD
condition in a routine that has no SYNAD
VCON in the DCB.
Filter Code: WSA
Conversational Action
User: N/A
system: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPI
Variable data supplied by: N/A
CZCPI004 TERNINATED: NO EXTERNAL STORAGE,DCB
CLOSED
Explanation: page allocation is not possible
because no external storage is available.
Filter Code: WSA
Conversational Action
User:
N/A
Syste~:
Awaits next corr~and.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPI
Variable data supplied by: N/A
CZCPI005 TERMINATED: PUBLIC STORAGE RATION
EXCEEDED, DCB CLOSED
370
Explanation: The user has exceeded the storage
allocation allowed by Resource Control.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPI
Variable data supplied by: N/A
CZCPI006 TERMINATED: NO SECONDARY STORAGE
ALLOCATION SPECIFIED,DCB CLOSED
Explanation: The user did not specify a
secondary allocation for the data set.
Filter Code: WSA
Ccnversational Action
User:
N/A
System: Awaits next co~and.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPI
Variable data supplied by: N/A
CZCPI007 TERMINATED: SYSTEM LIMIT
Explanation: Initial virtual memory allocation
for the shared data set has been exhausted.
The shared data set cannot be expanded.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPI
Variable data supplied by: N/A
CZCPI008 TERMINATED: SYSTEM LIMIT
Explanation: Maximum data set or member Size
has been exceeded. A member is allowed only
256 pages.
Filter Code: WSA
Conversational Action
User: N/A
Systelr:: Awaits next co~and.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPI
Variable data supplied by: N/A
CZCPI009 TERMItffiTED: SYSTEN FAULT (CZCPI009)
Explanation: The number of pages in the
deletion list exceeds the nurrber of pages in
the data set.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see AFpendix B-12.)
Requirement determined by: CZCPI
Variable data supplied by: N/A
CZCPI012 TERMINATED:
SYSTEM FAULT (CZCPI012)
Explanation: A meaningless return code was
passed from CZCOD.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPI
Variable data supplied by: CZCPI
CZCPL004 TERMINATED: SYSTEM LIMIT: OPERATION (data
set name)
Explanation: The maximum directory size was
exceeded (254 pages).
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPL
Variable data supplied by: CZCPL
CZCPL005 TERMINATED: SYSTEM LIMIT
(data set name)
Explanation: The directory for the shared data
set cannot be expanded.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPL
Variable data supplied by: CZCPL
CZCPL006 TERMINATED:NO EXTERNAL STORAGE,MACRO
CANCEILED,DCB CLOSED
Explanation: External storage is filled and
page allocation is not Fossible.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPL
Variable data supplied by: N/A
CZCPL007 TERMINATED: STORAGE RATION EXCEEDED, MACRO
CANCELLED,DCB CLOSED
Explanation: The user bas exceeded the storage
allocation allowed by Resource control.
Filter Code: TSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPL
Variable data supplied by: N/A
CZCPLooa TERMINATED:NO SECONDARY ALLOCATION
SPECIFIED,DCB CLOSED data set name
Explanation: The user did not specify
secondary allocation for the data set.
Filter Code: WSA
Conversational Action
User: N/A
System: Awed ts next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPL
Variable data supplied by: CZCPL
CZCPL009 TERMINATED: SYSTEM LIMIT data set
name,DCB CLOSED
Explanation: Shared data set cannot be
eXFanded.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPL
Variable data supplied by: CZCPL
CZCPL010 TERMINATED:SYSTEM LIMIT:MllCRO
CANCELLED,DCE CLOSED data set name
Explanation: The maximum data set/member size
has been exceeded. A maximum of 256 pages
is allowed in a member.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPL
Variable data supplied by: CZCPL
CZCPL011 TERMINATED:
(CZCPL011)
SYSTEM FAULT.
DCB CLOSED
Explanation: The page number on an attempt to
insert was outside data set.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
371
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPL
Variable data supplied by: N/A
CZCPL012 TERMINATED: SYSTEM FAULT. DCB CLOSED
(CZCPL012)
Explanation: The number of pages to be deleted
exceeds the number of pages in the data set.
Filter code: WSA
Conversational Action
User: N/A
System: Awaits next corr~and.
Nonconversational Action
User: N/A
System: Continues [rocessing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPL
Variable data supplied by: N/A
CZCPL015 TERMINATED: SYSTEM FAULT (CZCPL015)
Explanation: A rr,eaningless return code was
passed to CZCPL from CZCOD.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCPL
Variable data supplied by: CZCPL
CZCPZOOl CANCELLED: KEYLEN=O IN DCB
Explanation: The key length as specified in
the DCB must be greater than zero.
Filter Code: WSA
Conversational Action
User: N/A
System: Continues processing.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requireffient determined by: CZCPZ
Variable data supplied by: N/A
CZCPZ003 CANCELLED: RKP+KEYLEN > LRECL IN DCB
Explanation: The record length (DCBLRE) as
specified in the DCB must be greater than
the displacement of the key from the
beginning of the record (RKP).
Filter Code: WSA
Conversational Action
User: N/A
System: continues processing.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: czcPZ
Variable data supplied by: N/A
CZCQEOOl TERMINATED: INVALID DCB,MACRO CANCELLED
Explanation: The DCB header in RESTBL does not
point to a recognizable DCB. DCB may have
been overlaid or not open.
Filter Code: WSA
Ccnversational Action
User:
N/A
System: Continues processing.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCQE
Variable data supplied by: N/A
CZCQE009 TERMINATED:TWO TASKS ATTEMPTED TO ACCESS
NON-SHARED DATA SET
Explanation: A data set that is not shared
cannot be open for two different tasks at
the same time, to preserve data set
integrity.
Filter Code: WSA
Conversational Action
User:
N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCQE
Variable data supplied by:
N/A
CZCQK004 NAME FOR NEW MEMBER OF DATA SET data set
name
CZCPZ002 CANCELLED: LRECL >
MAXI~UM
(4000) IN DCB
Explanation: The record length (DCBLRE) as
specified in the DCB is greater than the
maximum allowed for a VISAM data set
(maximum=4000) .
Filter Code: WSA
Conversational Action
User: N/A
System: Continues processing.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix P-12.>
Requirement determined by: CZCPZ
Variable data supplied by: N/A
372
Explanation: A VPAM data set has a new member
that has never been stowed. A unique member
nane is needed before VOMER stows the new
member. Enter a unique 8-character member
narre.
Filter Code: XSA
Conversational Action
User: Enter member name.
System: Awaits member name.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCQK
Variable data supplied by: CZCQK
Page of GC28-2031-7. Issued Sept. 30. 1912 by TNL GN28-3220
CZCQK005 MEMBER NAME member name NOT UNIQUE OR
INVALID. RESPOND
Explanation: A member name was entered by the
user. This name was not eight characters
long or was the name of an old member.
Filter Code: XSA
Conversational Action
User: Enter valid 8-character member name.
Default: system assigns a name.
System: Awaits valid member name.
Nonconversational Action
User: N/A
System:
N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by:
CZCQK
Variable data supplied by:
CZCQK
Explanation: The data set named in the message
text had a new member that had been created
but never stowed. A unique member name.
given in the message text, was created, and
the member stowed.
Filter Code: WSA
Conversational Action
User: N/A
System:
Processing continues.
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCQK
variable data supplied by: CZCQK
CZCQK010 SYSTEM FAULT (CZCQK010)
CZCQK006 SYNAD value:LAST OPERATION operation:DATA
SET data set name
Explanation: While attempting to perform the
operation listed in the message text, on the
data set named in the message test, the
SYNAD condition listed was deleted.
Filter Code: WSA
Conversational Action
User:
N/A
System: Processing continues.
Nonconversational Action
User:
N/A
System:
N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by:
CZCQK
Variable data supplied by:
CZCQK
CZCQK001 EODAD ON DATA SET name
Explanation: An attempt was made to access a
record beyond the boundaries of the data set
named in the message text.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User:
N/A
system:
N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCQR
variable data supplied by:
CZCQR
CZCQR008 UNABLE TO CLOSE DATA SET data set name
Explanation: An attempt to close the data set
named in the message text resulted in a
recursive call to VOMER. The data set is
not completely closed.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User:
N/A
system:
N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCQK
variable data supplied by:
CZCQR
CZCQK009 NEW MEMBER data set name, STOWED FOR DATA
SET member name
Cannot write to log.
Filter Code: WSA
Conversational ~ction
User:
N/~
system: Continues processing.
Nonconversational Action
User:
N/~
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCQK
Variable data supplied by:
N/A
~xplanation:
CZCQR013 INTEGRITY OF DATA SET data set name
QUESTIONABLE
Explanation: While VDMER was processing the
data set named in the message text, an error
was detected that may have degraded the
integrity of the data set.
Filter Code: WSA
Conversational Action
User: N/A
System: Continues processing.
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCQK
Variable data supplied by: CZCQR
CZCQK014 DATA SET data set nawe UNUSABLE, SUGGEST
ERASE
Explanation: A serious error was detected on
the data set narred in the message text.
which has rendered the data set unusable.
Filter Code: WSA
Conversational Action
User:
Erase the data set.
System: Processing continues.
Nonconversational Action
User:
N/A
system: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCQK
variable data supplied by: CZCQK
CZCQR015 DATA SET narre:DSNAME data name:DCB
LOCATION address
Explanation: The information that would enable
the user to investigate the data set named
in the message text is in error.
General Messages
373
Page of GC28-2037-7, Issued Sept. 30,
1972 by TNL GN28-3220
Filter Code: WSA
Conversational Action
User: N/A
system: Continues processing.
Nonconversational Action
User:
N/A
system:
N/A
Reference Data (Also see Appendix 8-12.)
Requirement determined by: CZCQK
Variable data supplied by:
CZCQK
CZCQK016 OPEN FOR DATA SET data set name NOT
COMPLETED
Explanation: An error occurred while
attempting to open a DCB for the data set
named in the message text; the DCB was not
successfully opened.
Filter Code: WSA
Conversational Action
User:
N/A
System:
Processing continues.
Nonconversational Action
User:
N/A
system:
N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCQK
Variable data supplied by:
CZCQK
CZCRH 0015 PERMANENT ERROR UNIT ADDRESS:
Variable data supplied by:
Message residence: CZCRH
Message issued by: CZCRH
CZCRH 003A READY DIRECT ACCESS DEVICE:
ccuu
Explanation: An I/O operation has been
requested on a direct access device which is
not in the ready state.
"ccuu" is the
device address. The I/O operation which
precipitated the message may have been
initiated by either OBTAIN/RETAIN or SAM.
Conversational Action
User: Operator must put specified device
into ready status.
System: Task waits until proper response is
received, then continues.
Nonconversational Action
User:
Operator must put specified device
into ready status.
system: Task wai~s until proper response is
received, then continues.
Reference Data (Also see Appendix B-13.)
Requirement determined by:
CZCRH
Variable data supplied by:
CZCRH
Message residence: CZCRH
Message issued by: CZCRH
ccuu
Explanation: An error has been encountered on
d
direct access device and all possible
retry procedures have been unsuccessful.
"ccuu" specifies the address of the device
on which the error occurred. The I/O
operation which failed could have been
initiated by either SAM or OBTAIN/RETAIN.
Conversational Action
User: N/A
System: will proceed to user's SYNAD
routine.
Nonconversational Action
User: N/A
System: will proceed to user's SYNAD
routine.
Reference Data (Also see Appendix B-13.)
Requirement determined by: CZCRH
Variable data supplied by: CZCRH
Message residence: CZCRH
Message issued by: CZCRH
CZCRNOOl BSAM NOTE MACRO ISSUED, ALL I/O NOT
CHECKED. RESPOND
Explanation: All READs or WRITEs must be
checked before atterr,pting to issue a NCTE
macro.
If processing continues (respond Y),
the correct address will not be obtained. A
response of N will cause abnormal
termination with the task intact.
Filter Code:
XSA
Conversational Action
User: Reply as directed.
System: Awaits reply.
Nonconversational Action
User:
N/A
System:
N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCRN
Variable data supplied by:
N/A
CZCRP 0011 BUS OUT CHECK, UNIT
CZCRH 002S UNRECOVERABLE ERROR UNIT:
CZCRH
CCUll
ccuu
Explanation: An error has been encountered on
a direct access device for which there is no
retry possible or for which all retry
procedures have been tried unsuccessfully.
"ccuu" specifies the address of the device
on which the error occurred. The I/O
operation which failed could have been
initiated by either SAM or OBTAIN/RETAIN.
Conversational Action
User: N/A
system: Will proceed to user's SYNAD
routine.
Nonconversational Action
User: N/A
system: Will proceed to user's SYNAD
routine.
Reference Data (Also see Appendix B-13.)
Requirement determined by: CZCRH
Explanation:
A bus out check has occurred in
the device whose address is specified in
"ccuu" and no retry or no further retry is
possible. The rressage can occur for a SAM
I/O request on a magnetic tape or unit
record device.
Conversational Action
User: N/A
System: Will proceed to user's SYNAD
routine.
Nonconversational Action
User:
N/A
system: Will proceed to user's SYNAD
routine.
Reference Data (Also see Appendix B-13.)
Requirement determined by: CZCRP
Variable data supplied by: CZCRP
Message residence: CZCRP
Message issued by:
CZCRP
Page of GC28-2037-7, Issued Sept. 30, 1972 by TNL GN28-3220
CZCRP 001S UNIT nnnn NO PATH AVAILABLE.
Explanation: CZCRP attempted to initiate I/O
to the unit whose hexadecimal address is
specified by nnnn. but all I/O paths to the
device were inoperative.
Action
User: WA
System: Will proceed to the user's SYNAD
routine.
Reference Data (Also see Appendix B-13.)
Requirement determined by: CZCRP
Variable data supplied by:
CZCRP
CZCRP 0021 CHAINING CHECR, UNIT ccuu
Explanation: A chaining check has occurred on
the device whose address is specified as
·ccuu· and no further retry (or in the case
of unit record devices -- no retry at all)
is possible. This message can occur for a
SAM I/O request on a magnetic tape or unit
record device.
Conversational Action
User: N/A
System: Will proceed to user's SYNAn
routine.
Nonconversational Action
User: N/A
System: Will proceed to user's SYNAn
routine.
Reference Data (Also see Appendix B-13.)
Requirement determined by: C~CRP
Variable data supplied by: CZCRP
Message residence: CZCRP
Message issued by: CZCRP
CZCRP 0031 OVERRUN, UNIT ccuu
Explanation: An overrun condition is
discovered for a SAM I/O operation on a
magnetic tape device and no further retry is
possible. The device address of the tape on
which the error occurred is specified as
"ccuu".
Conversational Action
User: N/A
System: Will proceed to user's SYNAD
routine.
Nonconversational Action
User: N/A
System: will proceed to user's SYNAD
routine.
Reference Data (Also see Appendix B-13.)
Requirement determined by: CZCRP
Variable data supplied by: CZCRP
Message residence: CZCRP
Message issued by: CZCRP
CZCRP 004A INTERVENTION REQUIRED ccuu
Explanation: A SlIM I/O operation has been
requested on a unit record or tape device
whieh is not in the ready state.
"ccuu" is
the device address.
Conversational Action
User: Operator must put specified device
into ready state.
System: Task waits until proper response is
received, then continues.
Nonconversational Action
User: Operator must put specified device
into ready state.
System: Task waits until proper response is
received, then continues.
Reference Data (Also see Appendix B-13.)
Requirement determined by:
CZCRP
Variable data supplied by: CZCRP
Message residence: CZCRP
Message issued by: CZCRP
CZCRP 0051 DATA CHECK, WRITING ccuu
Explanation: A data check has occurred while
writing on a magnetic tape or paper tape
device and no further retry is possible.
The address of the device on which the
errors occurred is specified as ·ccuu".
This message only appears if SAM I/O
operation has been requested.
Conversational Action
User:
N/A
System: Will proceed to user's SYNAn
routine.
Nonconversational Action
User: N/A
System: Will proceed to user's SYNAD
routine.
Reference Data (Also see Appendix B-13.)
Requirement determined by: CZCRP
Variable data supplied by: CZCRP
Message residence: CZCRP
Message issued by: CZCRP
CZCRP 0061 DATA CHECK, CONTROL, ccuu
Explanation: A data check has occurred on a
magnetic tape device whose address is
specified as ·ccuu· and no further retry is
possible. This message can occur for a SAM
I/O request.
Conversational Action
User: N/A
System: Will proceed to user's SYNAD
routine.
Nonconversational Action
User:
N/A
System: will proceed to user's SYNAn
routine.
Reference Data (Also see Appendix B-13.)
Requirement determined by: CZCRP
Variable data supplied by: CZCRP
Message residence: CZCRP
Message issued by: CZCRP
CZCRP 0071 DATA CHECK, READING ccuu
Explanation: A data check has occurred while
reading a magnetic tape or paper tape device
and no further retry is possible. The
address of the device on which the error
occurred is specified in "ccuu". This
:message can appear only after a SAM I/O
operation has been initiated.
Ccnversational Action
User:
N/A
System: Will proceed to user's SYNAn
routine.
Nonconversational Action
User: N/A
System: Will proceed to user's SYNAn
routine.
Reference Data (Also see Appendix B-13.)
Requirement determined by: CZCRP
Variable data supplied by: CZCRP
Message residence: CZCRP
Message issued by: CZCRP
CZCRP 0081 EQUIPMENT CHECK UNIT ccuu
Explanation: An equipment check has occurred
in a SAM-initiated I/O operation on a
magnetic tape unit or printer and no further
retry is possible. The address of the
device on which the error occurred is
specified as "ccuu".
Conversational Action
User:
N/A
375
System: Will proceed to user's SYNAD
routine.
Nonconversational Action
User: N/A
System: Will proceed to user's SYNAD
routine.
Reference Data (Also see Appendix B-13.)
Requirement determined by: CZCRP
Variable data supplied by: CZCRP
Message residence: CZCRP
Message issued by: CZCRP
CZCRP 009S UNRECOVERABLE ERROR ccuu
Explanation: Retry procedures, where
specified, have been executed the maximum
number of times and the I/O operation still
has not been successfully completed. This
message is precipitated by a failing SAM I/O
request on a unit record or tape device
whose address is specified as ·ccuu·.
Conversational Action
User: N/A
System: Will proceed to user's SYNAD
routine.
Nonconversational Action
User: N/A
System: Will proceed to user's SYNAD
routine.
Reference Data (Also see Appendix B-13.)
Requirement determined by: CZCRP
Variable data supplied by: CZCRP
Message residence: CZCRP
Message issued by: CZCRP
CZCRP 010A DATA CHECK, READING ccuu
Explanation: The message will appear every
time data check occurs on a card read
operation. The address of the card reader
is specified as ·ccuu". This message can
occur only after a SAM I/O operation has
been initiated.
Note: There is no maximum number of retries
-- the procedure continues as long as a data
check is encountered and the operator
continues to place the erroneous card back
in the stacker.
Conversational Action
User: Correct last card in stacker.
Replace run out cards and last card in
stacker into the read hopper and ready
card reader.
System: Task waits until reader is readied,
then continues.
Nonconversational Action
User: Correct last card in stacker.
Replace run out cards and last card in
stacker into the read hopper and ready
card reader.
System: Task waits until reader is readied,
then continues.
Reference Data (Also see Appendix B-13.)
Requirement determined by: CZCRP
Variable data supplied by: CZCRP
Message residence: CZCRP
Message issued by: CZCRP
CZCRP 011A DATA CHECR, WRITING ccuu
376
Explanation: A data check occurred on a card
punch operation. The address of the card
punch is specified as "ccuu". This message
can occur only after a SAM I/O operation has
been initiated. Note: There is no maximum
number of retries-==-the procedure will
continue as long as a data check is
encountered and the operator continues to
follow the prescribed steps.
Conversational Action
User: Run out punch cards and destroy the
last punched card. Re-ready the card
reader.
System: Task waits until reader is readied,
then continues.
Nonconversational Action
User: Run out punch cards and destroy the
last punched card. Re-ready the card
reader.
System: Task waits until reader is readied,
then continues.
Reference Data (Also see Appendix B-13.)
Requirement determined by: CZCRP
Variable data supplied by: CZCRP
Message residence: CZCRP
Message issued by: CZCRP
CZCRP 012A
EQUIP~~NT
CHECK UNIT ccuu
Explanation: The message will appear every
time an equipment check occurs on a SAM
initiated card read operation. The device
address of the card reader is specified as
·ccuu·.
Ccnversational Action
User: Replace last card in stacker and run
out cards in reader hopper. Ready card
reader.
System: Task waits until reader is readied,
then continues.
Ncnccnversational Action
User: Replace last card in stacker and run
out cards in reader hopper. Ready card
reader.
System: Task waits until reader is readied,
then continues.
Reference Data (Also see Appendix B-13.)
Requirement determined by: CZCRP
Variable data supplied by: CZCRP
Message residence: CZCRP
Message issued by: CZCRP
CZCSA100 SYSTEM FAULT: QSAM CANNOT RESTORE
CONTROL TO YOUR SYNAD EXIT ROUTINE
Explanation: A privileged program has invoked
the QSAM access method, and QSAM has
detected a SYNAn error condition. A system
restriction prevents QSAM from passing
control to your SYNAn exit routine.
Suggested action: check DECB for an
indication of the type of error that caused
the SYNAD condition.
Filter Code: WSA
Conversational Action
User: N/ll
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCSA
Variable data supplied by: N/A
CZCTCOOl HOW MANY PORTS(LINES) FOR THIS TASK?
Explanation: Your answer sets the maximum
number of users for this application
program.
Filter Code: XSA
Conversational Action
User:
Enter maximum number or N.
System: If user enters Y, ignores error and
continues processing; if user enters N,
terminates task abnormally. RESPONSE
INVALID, TRY AGAIN issued if user enters
response other than Y or N.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCWD
Variable data supplied by: CZCWD
CZCWD600 DDNAME data definition name. SPACE CANNOT
BE ALLOCATED
Explanation: New drive and/or volume may
rectify problem if due to hardware error.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCWD
Variable data supplied by: CZCWD
CZCWD-2863-6038 DDNAME ddname, DSNAME dsname.
EXPIRATION DATE NOT REACHED ON DATA SET OPENED FOR
OUTPUT. CONTINUE? REPLY - Y OR N.
Explanation: The expiration date in the data
set control block is later than the current
date under which the system is running.
Conversational Action
User: Enters Y or N from terminal.
System: If user enters Y, system ignores
error and continues processing; if N, it
terminates task abnormally with same ID
code. Otherwise, issues message RESPONSE
INVALID, TRY AGAIN with same ID code, and
task waits.
Nonconversational Action
User: GATE forces abnormal terF~nation of
task.
System: N/A
Reference Data
Requirement determined by: CZCWD
Variable data supplied by: CZCWM
Message residence: CZCWM
Message issued by: CZCWM
Destination
Conversational: User's terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATE
CZCWL100 DDNAME data definition name. VOLUME
INCORRECTLY FORMATTED. CONTINUE?
Exp1anation: Extents in format-l DSCB are not
numbered sequentially. If allowed to
continue, records would be out of sequence,
missing, or both.
Filter Code: WSA
User: Enters Y (to continue) or N.
System: If user enters Y, renumbers extents
for this run; if user enters N,
abnormally terminates task. RESPONSE
INVALID, TRY AGAIN issued if user enters
response other than Y or N.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCWL
Variable data supplied by: CZCWL
CZCWL-3A83-6040 DDNAME ddname, DSNAME dsname.
EXTENTS IN DSCB ARE NOT NUMBERED IN CONSECUTIVE
ORDER. CONTINUE WITH EXTENTS RENUMBERED FOR THIS
RUN OR TERMINATE? REPLY -- C OR T.
Explanation: During construction of the extent
fields in a Data Extent Block, the extents
in the Forwat 1 and 3 Data Set Control
Blocks are checked for consecutive order.
379
When the extents are in proper sequence but
not numbered consecutively, the user can
have processing continued by electing C
option. Extents will be properly numbered
in the Data Extent Block. The Data Set
Control Blocks remain unchanged. This
message is only printed once per data set,
no matter how many sequence errors or breaks
are detected.
Conversational Action
User: Enters C or T from terminal.
System: If user enters C, system renumbers
extents for this run; if T, it terminates
task abnormally with same ID code.
otherwise, task waits, and system issues
message RESPONSE INVALID, TRY AGAIN with
same ID.
Nonconversational Action
User: GATE forces abnormal termination of
task.
System: N/A
Reference Data
Requirement determined by: CZCWL
Variable data supplied by: CZCWM
Message residence: CZCWM
Message issued by: CZCWM
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATE
CZCWOOOl PROCEEDING:
ASCII DATA SET
BLOCK SIZE EXCEEDS 2048 FOR
Explanation: For an ASCII data set, block size
must be 2048.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCWO
Variable data supplied by: N/A
CZCW0100 DDNAME data definition name. OPEN
OPERANDS CONFLICT WITH DDEF. CONTINUE?
Explanation: The DISP or UNIT operands of ddef
conflict with OPEN operands. E.g., an
attempt may have been made to open a null
data set for input.
Filter Code: WSA
Conversational Action
User: Enters Y (to continue) or N.
System: Awaits response.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCWO
Variable data supplied by: CZCWO
CZCW0200 DDNAME data definition name. DCB MACRF
OPERAND INVALID. CONTINUE?
Explanation: DCB MACRF operand specifies READ
for data set which has been opened for
output, or WRITE for a data set which has
been opened for input.
380
Filter Code: WSA
Conversational Action
User: Enters Y (to continue) or N.
System: Awaits response.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCWO
Variable data supplied by: CZCWO
CZCW0300 ATTEMPT TO OPEN DCB ON DDNAME data
definition name WHICH HAS A DCB CURRENTLY OPENED
Explanation: The data set specified to be
opened has already been opened.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCWO
Variable data supplied by: CZCWO
CZCW0400 DDNAME data definition name. DDEF
OPERANDS CONFLICT WITH OPEN OPERANDS.
Explanation: The DISP or UNIT operands of DDEF
conflict with OPEN operands; for example:
an attempt may have been made to open a null
data set for input.
Filter Code: ISA
Ccnversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCWO
Variable data supplied by: CZCWO
CZCW0500 DDNAME data definition name. INVALID
VOLUME SEQUENCE NUMBER
Explanation: Volume sequence number greater
than number of volumes specified.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCWO
Variable data supplied by: CZCWO
CZCW0600 DDNAME data definition name. INVALID
DEVICE TYPE
Explanation: Invalid device type in JFCB, or
DCB and JFCB device types conflict.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
Variable data supplied by:
CZCWO
CZCWO
CZCW0700 DDNAME data definition name. DCB MACRF
OPERAND CONFLICTS WITH OPEN OPERANDS
Explanation: DCB MACRF operand specifies READ
for data set to be opened for output, or
WRITE for data set opened for input.
Filter Code: ISA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
system: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCWO
Variable data supplied by: CZCWO
CZCW0800 DDNAME data definition name. VOLUME NOT
MOUNTED
Explanation: The volume could not be mounted
for these possible reasons: Volume in use;
operator unable to mount volume: nonzero
return code following mount request.
If the
volume is PRIVATE, scratch volume not
mounted.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing_
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCWO
Variable data supplied by: CZCWo
CZCW0900 SYSTEM FAULT. DDNAME data definition name
(CZCWC900)
Explanation: BSAM OPEN (CZCWO) has received a
non-zero return code from TAPE OPEN (CZCWT),
DISK OPEN
Requirement determined by: CZUFA
Variable data supplied by: N/A
CZUFA111 CANCELLED: DUMP/RESTORE CANNOT BE RUN AT
THIS TIME
Explanation: No virtual memory space
available.
Filter Code: WSA
Conversational Action
User: Reenter command after releasing some
virtual memory or after LOGOFF-LOGON.
System: Prompts for next co~mand.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUFA
Variable data supplied by: N/A
CZUFA112 CANCELLED: VOLUME volume serial number
CANNOT BE MOUNTED
Explanation: The volume was not mounted.
Possible reasons: volume in use, operator
couldn't mount volume, or nonzero return
code when mounting was requested. If the
volume is PRIVATE: scratch volume not
mounted.
Filter Code: WSA
Conversational Action
User: Reenter command or check with system
administrator for reason volume wasn't
mounted.
System: Command canceled: user is prompted
for next command.
Nonconversational Action
User: Same as conversational action.
System: Same as conversational action.
Reference Data
Requirement determined by: CZUFA
Variable data supplied by: CZUFA
CZUFA113 CANCELLED: VOLUME volume serial number
HAS INVALID FORMAT
EXPlanation: The volume is not formatted
correctly for use by this command. The PAT
may be incorrect. If disk, the format may
not be VAM2. If tape, the wrong tape may
have been used, or a tape with a short
record may have been used.
Filter Code: WSA
Conversational Action
User: If disk, insure that the disk has
valid format. If tape, insure that the
tape was dumped by the proper routine.
System: Command canceled; user is prompted
for next command.
Nonconversational Action
User: Same as conversational action.
System: Same as conversational action.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUFA
Variable data supplied by: CZUFA
Conversational Action
User: N/A
System: Command canceled. User is prompted
for next command.
Nonconversational Action
User: Same as conversational action.
System: Same as conversational action.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUFA
Variable data supplied by: N/A
CZUFOI01 CANCELLED: parameter INVALID
Explanation: Valid parameters are:
DEVICE-2311 or DEVICE=2314, VOLILFPRIVATE or
VOLID=volume serial number, and RUNMODE=FORE
or RUNMODE=BACK. No defaults are allowed.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUFO
Variable data supplied by: CZUFO
CZUFOI02 CANCELLED: parameter MISSING
Explanation: The user has not entered a
required parameter. No defaUlt entries for
DEVICE, VOLID, or RUNMODE are allowed.
Filter Code: WSA
Conversational Action
User: N/A
System: Awai ts next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUFO
Variable data supplied by: CZUFO
CZUFOI03 CANCELLED: PUBLIC VOLUME INVALID
CZUFA114 TERMINATED: I/O ERROR ON VOLUME volume
serial number
Explanation: I/O errors occured during the
DUMP/RESTORE process on the stated device
that terminated the DUMP/RESTORE process.
Filter Code: WSA
Conversational Action
User: N/A
System: Command canceled: user is prompted
for next command.
Nonconversational Action
User: N/A
System: Same as conversational action.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUFA
Variable data supplied by: CZUFA
CZUFA115 TERMINATED: INSUFFICIENT SPACE ON OUTPUT
DISK
Explanation: The DUMP/RESTORE could not
continue proceSSing because there are more
data and DSCB pages on the from-disk than
there are available pages on the to-disk.
Filter Code: WSA
~lanation:
RPS may be executed only on a
private volume.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: proceSSing continues.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUFO
Variable data supplied by: N/A
CZUF0104 CANCELLED: INSUFFICIENT VIRTUAL MEMORY
Explanation: PATCLEAR experienced a GETMAIN
failUre during processing.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
389
Requirement determined by:
Variable data supplied by:
CZUFO
N/A
CZUF0105 CANCELLED: UNABLE TO MOUNT VOLUME
Explanation: The operator is indicating to the
user that the volume that the user requested
could not be mounted.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUFO
Variable data supplied by: N/A
Requirement determined by:
Variable data supplied by:
CZUFO
CZUFO
CZUF0109 PATCLEAR COMPLETED, HOWEVER RELEASE OF
DEVICE FAILED
Explanation: The request to release the device
after PATCLEAR was completed was ignored.
Fields in the device label should be checked
for validity.
Filter Code: WSA
Ccnversational Action
USEr: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUFO
Variable data supplied by: N/A
CZUF0106 CANCELLED BY ATTENTION (PATCLEAR)
Explanation: The user has hit the attention
key (perhaps inadvertently) after entering a
command but prior to the time that the
system could execute it.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
system: continues processing.
Reference Data (Also see A~pendix B-12.)
Requirement determined by: CZUFO
Variable data supplied by: N/A
CZUF0107 CANCELLED: NONCONVERSATIONAL TASK
CREATION FAILED
Explanation: A nonzero return code was
returned by CZUEC, indicating that a
separate background task could not te
created to perform the PATCLEAR. Try
RUNMODE=FORE.
Filter Code: WSA
Conversational Action
User:
(See above.)
System: Awaits next corr~and.
Nonconversational Action
User: N/A
Systerr.: N/A
Reference Data (Also see Appendix B-12.)
Requirement determined ty: CZUFO
Variable data supplied ty: N/A
CZUFXI01 SYSTEM UNABLE TO ACCESS CATALOG FOR
USERID userid
Explanation: The system has determined that
the current member in the scratch catalog
cannot be used to recover this user's
catalog.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUFX
Variable data supplied by: CZUFX
CZUFX102 CATALOG FOR USERID use rid IS BEING
REBUILT
Explanation: The catalog is being rebuilt
because no member exists in the scratch
catalog and the user catalog is not usable.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
USEr: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUFX
Variable data supplied by: CZUFX
CZUF010B CANCELLED: ERROR IN PAT PAGE process
CZUFXI03 RE-ENTER ALL SHARING INFORMATION
Explanation: There was an I/O error in reading
or writing the PAT page; this error caused
cancellation of the PATCLEAR. ThE pack may
need to be reformatted with the DASDI
program before its next use.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
390
Explanation: The user catalog has to be
rebuilt. You must re-enter all sharing
information as this will be lost in
rebuilding from public DSCBs.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Page of GC28-2037-7, Issued Feb. 1, 1972 by TNL GN28-3207
Requirement determined by:
Variable data supplied by:
CZUFX
N/A
CZUFX104 RE-ENTER 'SHARING INFORMATION FROM THIS
SESSION
Explanation: The user catalog has to be
rebuilt.
You must re-enter all sharing
information from this session, because this
information will be lost in rebuilding from
public DSCBs.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUFX
Variable data supplied by: CZUFX
CZUFX105 CATALOG FOR USERID userid IS BEING
VALIDATED
Explanation: The contents of the new user
catalog must be verified before catalog
recovery is complete.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
--hser: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUFX
Variable data supplied by: CZUFX
Requirement determined by:
Variable data supplied by:
CZUFY
CZUFY
CZUFY200 PROCEEDING: UNABLE TO ACCESS USERCAT FOR
USERID userid
Explanation: A table containing the pointers
to the USer catalogs could not be accessed
for this particular userid.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix 8-12.)
Requirement determined by: CZUFY
Variable data supplied by: CZUFY
CZUPFOOl CANCELLED:
YOUR USER AUTHORITY
PATFIX COMMAND NOT ALLOWED TO
Explanation: The PATFIX command is allowed to
'0' authority users only.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
Systf>JII: Continues processing.
~.!§Jerence Dat.a (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: N/A
CZUPF100 CANCELJ,ED: VOLDEli' PARAMETER NOT SPECIFIED
'ZUPX106 TERMINATED:
j.)
UREIPL A STARTUP IS REQUIRED
COMPJ,ETE REBUILD PROCESS
Expl~lation!
The rebuilding of the' user
G<1.talog cannot be completed without a system
start,up.
Fi Iter code: WSA
conversational Action
User: N/A
System:
N/A
N'?'2.C!onversational Action
User: N/A
;~ystem:
N/A
He~~'fenc!LJlata (Also see Appendix 8-12.)
,'equi.!:E'JIlent determined by: CZUFX
'Iclriable data supplied by: N/A
::ZPFY100 PROCEEDING: USERID userid CANNOT BE ADDED
"'0
OSERCAT TABLE
Explanation; A table containing the pointers
to the user catalogs could not be accessed
for this particular userid.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits nex" command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
~lanation:
The VOLDEF parameter is not an
optional parameter in the PATFIX command.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
Usert N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by:
N/A
CZUPF120 CANCELLED: INVALID SYNTAX IN VOLDEF
PARAMETER
Explanation: The VOLDEF parameter contains a
syntax error. It may be specified as
PUBLIC, or a 2-element sublist containing
the device type followed by the volume ID.
Filter Codel WSA
conversatIonal Action
Userr N/A
System I
Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: N/A
General Messages
391
Page of GC2B-2031-7, Issued Feb. 1. 1972 by TNL GN2B-3207
CZUPF130 FIX HAS BEEN DEFAULTED TO 'N' FOR
NONCONVERSATIONAL TASK.
Explanation:
FIX=Y can only be specified in
conversational mode.
Filter Code:
WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
CZUPF
Variable data supplied by: N/A
CZUPF140 CANCELLED: INVALID FIX PARAMETER
Explanation: The FIX parameter must be
specified as Y or N or defaulted (N).
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System:
Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
CZUPF
Variable data supplied by: N/A
CZUPF150 CANCELLED: DSNAME data set name INVALID
FOR REPORTDS PARAMETER
£2!L'!.:l!;sational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: CZUPF
CZUPF190 CANCELLED: INSUFFICIENT VIRTUAL MEMORY
Explanation: PA'rFIX experienced a GETMAIN'
failure during processing.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Referen""' ..Q!!!:~ (Also see Appendix B-12.)
Rcquirellledc determined by: CZUPF
Variable data supplied by:
N/A
CZUPF210 DSCB REFERENCES VOLUME number. DESIRE TO
INCLUDE IT IN VOLDEF PARAMETER?
~~planation:
A DSCB was found that spans to a
volume that was not specified in the VOLDEF
parameter. You have the option to add this
vol\une to the parameter list.
:Fil ter Code: WSA
£(~!l~fsa t ~(maJ_~~tion
The DSNAME on the REPORTDS
parameter contains invalid syntax.
Fil!:er C.29~:
WSA
Conversational Action
User: Reenters command with proper syntax.
system: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
R>cference Data (il.lso see Appendix B-12.)
.Requirement. determined by:
CZUPF
Variable data supplied by: CZUPF
~lanation:
L,;UPF160 CANCELLED: REPORTDS DATA SET NAME data
set name NO'r DEFINED
.anation: The REPORTDS data set must be
defined by a DDEF command prior to issuing
the PATFIX command.
Filter Code:
WSA
Conver sat.TOnal Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
system: Continues processing.
~eference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable dat.a supplied by: CZUPF
CZUPF170 CANCELLED:
REPORT DATA SET data set name
RESIDES IN PUBLIC STORAGE
Explanation! When proceSSing public storage,
the report data set cannot reside in public
storage with FIX=Y.
~'iJ;!:er Code:
WSA
392
or N.
Awaits next command.
llonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: CZUPF
U~:}e:t'::
Enters Y
Sy.;tem:
CZUPF215 CONTINUE PROCESSING WITH FIX=N?
Explanation: You have the option to continue
processing without the volume, but FIX will
be set to 'N'.
Filter Code: WSA
Conversational Action
User:
Enters Y or N.
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by:
N/A
CZUPF220 PROCEEDING: BUFFER FULL. PATFIX RESTARTED
WITH VOLUMES SPECIFIED SO FAR.
Explanation: The PATFIX routine can no longer
add vol time s i~o its i nterna 1 tables.
Processing will be reinitiated with all
volumes specified so far.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Noncon~ersational Action
Page of GC28-2037-7, Issued Feb. 1, 1972 by TNL GN28-3201
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: N/A
CZUPF270 SDAT SHOWS RPN number (VM ADDRESS
address) ON VOLUME volume IS PAT; PAT ENTRY NOT
J;xplanation: If the 1F is not properly located
in the PAT, there may be serious disk
errors. The option will be given to
continue processing.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
1F.
General Messages
392.1
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: CZUPF
CZUPF280 CONTINUE PROCESSING?
Explanation: The user is given the option to
continue processing or have the command
cancelled.
Filter Code: WSA
Conversational Action
User: Enters Y or N.
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: N/A
CZUPF290 COMMAND CANCELLED.
Explanation: The command is cancelled and
processing of the command is discontinued.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: N/A
CZUPF300 CANCELLED: PAT PAGE ON VOLUME number
COULD NOT BE LOCKED
Explanation: PAT could not be locked by CZCEJ
in number of time-slices requested.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: CZUPF
CZUPF305 CANCELLED: PAT ON VOLUME FOR REPORT DATA
SET COULD NOT BE LOCKED
Explanation: PAT could not be locked by CZCEJ
in number of time-slices requested.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: N/A
CZUPF400 DEVCOUNT EXCEEDS NUMBER OF DEVICES
1\VAILABLE TO YOU. DEVCOUNT SET TO count.
Explanation: The User Table indicates a number
of direct access devices that is less than
the number specified in the DEVCOUNT
parameter. DEVCOUNT has been reset to User
Table value.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Non conversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: CZUPF
CZUPF405 CANCELLED: NO DEVICES AVAILABLE TO YOUR
TASK
Explanation: The User Table indicates that
there are no devices currently available for
your task.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: N/A
CZUPF410 CANCELLED: REPORT DATA SET NOT VSAM,
VISAM (LINE), OR QSAM (WITHOUT KEYS)
Explanation: The PATFIX module will only
handle report data sets that are VSAM, VISAM
(line) or QSAM (without keys).
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Ncnconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: N/1\
CZUPF460 CANCELLED: ATTENTION INTERRUPT COMMAND
Explanation: An attention interruption was
received during PATFIX processing.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: N/A
CZUPF465 CANCELLED: VOLUME LABEL ERROR ENCOUNTERED
WHILE MOUNTING VOLUME number
393
Explanation: PAUSE encountered a volume label
error during volume mounting.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System:
continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: CZUPF
CZUPF470 CANCELLED: OPERATOR COULD NOT FIND VOLUME
number
Explanation: Return code from MTREQ the
operator encountered a problem mounting a
volume.
Possibly, the volume is not
available to be mounted.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
system: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: CZUPF
CZUPF500 UNREFERENCED FORMAT-F DSCB ON VOLUME
number, RPN page number, SLOT slot number. ZERO IT
OUT?
Explanation: A format-F DSCB was found that is
not pointed to by a format-E or another
format-F.
Filter Code: WSA
Conversational Action
User:
Enters Y(yes), N(no), A (all
unreferenced format-F's found), or NONE.
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data {Also see Appendix B-12.}
Requirement determined by: CZUPF
Variable data supplied by: CZUPF
CZUPF501 DO YOU WANT TO WRITE OUT THE REBUILT PAT
ON VOLO~£ number?
Explanation: You have the option to have the
rebuilt PAT written out to disk and replace
the old PAT.
Filter Code: WSA
Conversational Action
User:
Enters Y(yes), N(no), A (all volumes
specified) or NONE.
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZOPF
Variable data supplied by: N/A
CZUPF502 INVALID REPLY.
394
REENTER
Explanation: The previous reply does not
coincide with any valid reply for the
particular request.
Filter Code: WSA
Conversational Action
User: Enters Y, N, A, or NONE.
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by:
N/A
CZUPF503 CANCELLED: EXCESSIVE INVALID REPLIES
Explanation: You are given three chances to
make a valid reply.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
variable data supplied by: N/A
CZUPF510 CANCELLED: MOUNT FAILURE ON VOLUME
number.
Explanation: Mount failure occurred during
MTREQ.
Filter Code: WSA
Ccnversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
CZUPF
Variable data supplied by: CZUPF
CZUPF515 CANCELLED: VOLUME number NOT A VAM VOLUME
Explanation: The PATFIX command only processes
volumes in VAM format.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
CZUPF
Variable data supplied by: CZUPF
CZUPF520 CANCELLED: VOLUME number MOUNTED FOR
ANOTHER TASK
Explanation: One to the volumes specified in
the VOLDEF parameter ..as found mounted for
another task.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: CZUPF
CZUPF530 CANCELLED: VOLDEF PARAMETER SPECIFIES
PUBLIC VOLUME number AS PRIVATE
Explanation: A public volume may not be
specified by volume ID on the VOLDEF
parameter.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: CZUPF
CZUPF550 INVALID FORMAT-E DSCB ON VOLUME number,
RPN page number, SLOT slot number.
ZERO IT OUT?
Explanation: You have the option to zero out
certain format-E DSCBs that the PATFIX
module determines to be unsalvageable.
Filter Code: WSA
Conversational Action
User:
Enters Y(yes}, N(no), A (all invalid
format-e's found), or NONE.
System: Awaits next command.
Nonconversational Action
User: N/A
system: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: CZUPF
CZUPF600 CHECKSUM ERROR FOUND ON VOLUME number,
RPN page number, SLOT slot number. RECOMPUTE?
Explanation:
You have the option to recompute
CHECKSUM errors.
Filter code: WSA
Conversational Action
Use~:
Enters Y(yes), N(no), A (all checksum
errors found), NONE.
System: Awaits next COH~and.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: CZUPF
CZUPF602 INVALID REPLY. REENTER
Explanation: The user has entered an incorrect
reply to a diagnostic message.
He is given
a chance to rectify his mistake.
Filter Code:
WSA
Conversational Action
User: Enters Y or N.
system: Awaits next command.
Nonconversational Action
User: N/A
System:
continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
Variable data supplied by:
CZUPF
N/A
CZUPF610 DO YOU WANT TO COMPLETELY ZERO OUT UNUSED
DSCB SLOTS?
Explanation: If any unused DSCB slots are
found that contain any non-zero bytes, you
have the option to zero them out.
Filter Code: WSA
Conversational Action
User:
Enters Y(yes) or N(no).
Sy stem: Awa i ts ne xt command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: N/A
CZUPF700 CANCELLED: INVALID DEVCOUNT PARAMETER
Explanation: The DEVCOUNT parameter must be
specified as a valid decimal number,
one-to-eight decimal digits.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awai ts next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by:
N/A
CZUPF720 VOLUME volume number FOUND MOUNTED, BUT
NO ACTIVE JFCB. DEVICE CONSIDERED AVAILABLE.
Explanation: The device for any volume on the
VOLDEF parameter that is found mounted for
the current task will be used by this module
for mounting other volumes if necessary, and
will be released at the conclusion of
processing. DEVCOUNT has been incremented
by one.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by:
CZUPF
Variable data supplied by: CZUPF
CZUPF725 VOLUME volume number HAS ACTIVE JFCE
(DDNAME data definition name). JFCB RELEASED AND
DEVICE HELD
Explanation: The device for any volume that is
found Hounted for the current task will be
used by this moudle for mounting other
volumes, if necessary, and will be released
at the conclusion of processing. DEVCOUNT
has been incremented by one.
Filter Code: WSA
Conversational Action
User: N/A
System:
Awaits next command.
395
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: CZUPF
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: N/A
CZUPF920 CANCELLED: REPORTDS LRECL LESS THAN 132
CZUPF730 CANCELLED: RELEASE (WITH HOLD OPTION) OF
VOLUME number FAILED
Explanation: A bad return code was encountered
from RELEASE, with hold option specified.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: CZUPF
CZUPF750 CANCELLED: REPDRTDS VOLUME ALSO SPECIFIED
ON VOLDEF PARAMETER WITH FIX=Y
Explanation: The volume for the report data
set must be different from any volumes on
the VOLDEF parameter, with FIX=Y.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: N/A
Explanation: Each record of the report data
set must have 132 bytes of text regardless
of data set organization.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
system: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: N/A
CZUPF930 CANCELLED: RECORD FORMAT OF REPORT DATA
SET NOT FA OR VA
Explanation: Record formats other than FA or
VA will not be processed.
Filter Code: WSA
Conversational Action
User: N/A
System: A~aits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: N/A
CZUPF940 CANCELLED: QSAM REPORT DATA SET NOT
PROCESSED IF KEYS ARE SPECIFIED
CZUPF900 CANCELLED: REPORTDS BLOCKSIZE NOT A
MULTIPLE OF LRECL
Explanation: If the blocksize for a QSAM
report data set is not a multiple of the
logical record length, the data set will not
be processed.
Filter Code: WSA
Conversational Action
User: N/A
system: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: N/A
CZUPF910 CANCELLED: VISAM DATA SET FOR REPORTDS
PARAMETER NOT A LINE DATA SET
Explanation: If a VISAM data set is to be used
for the report data set, it must be in the
form of a line data set. DCB=(RKP=4,
KEYLEN=7, LRECL=144, RECFM=VA).
Filter code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
396
Explanation: QSAM data sets for the REPORTDS
parameter may not have keys.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
variable data supplied by: N/A
CZUPF950 CZNCELLED: DDEF FAILURE FOR SYSTEM
PRINTER FOR ~SAM REPORT DATA SET
Explanation: A system printer could not be
defined for an MSAM report data set.
Perhaps the system operator has not done an
ASNBD delete for a printer.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Ncnccnversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: N/A
CZUPF960 CANCELLED: ONLY SAM TAPE (NOT SAM DISK)
ALLOWED FOR REPORT DATA SET
Explanation: A SAM-format disk may not be used
for the report data set because TSS/360 can
not print from a SAM disk.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: N/A
CZUPF970 CANCELLED: I/O ERROR DURING MSAM
PROCESSING FOR REPORT DATA SET
Explanation: A permanent I/O hardware error
was encountered by MSAM.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: N/A
CZUPF980 CANCELLED: SETUR MACRO INSTRUCTION
FAILURE FOR SYSTEM PRINTER
Explanation: A system printer could not be
defined by the SETUR macro instruction.
SETUR should have specified the printer's
configuration (such as carriage tape, form
to be used, print density, and UCS codes).
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZUPF
Variable data supplied by: N/A
Message issued by: CGCKB
Destination
Conversational: User's Terminal
Nonconversational: SYSOUT
Transmittal technique: GATWR
BATA SET IS OF A GENERATION GROUP, CANNOT INDEX
ORDER
Explanation: An error return was handled from
INDEX(CZCFI). If ADDCAT indicates a set is
of a generation group. then INBEX will be
called to create a generation group.
Conversational Action
User: Check over generation levels for data
set, errors may exist.
System: Processing continues.
Nonconversational Action
User: Task deleted.
System: Processing continues.
Systell' Default Action: Terminate compilation.
Reference Data
Requirement dete:r'mined by: CZCFB1
Variable data supplied by: N/A
Message residence: CZCFBP
Message issued by: GATE (CZAAB)
Destination
Conversational: User's terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATWR (by means of a
call to the LPC PUTDIAG entry, if in
conversational Rlode).
DATA SET XXX
IS IGNORED
XXX HAS BLANK PAGES EMBEDDED AND
Explanation: The data could not be processed
but the routine continues with the next data
set.
Reference Data (See Appendix B-27.)
DATA SET XXX
IGNORED
IXXX IS NULL DATA SET AND IS
Explanation: Pages were found to be assigned
but not in use. Processing continues with
next data set.
Reference Data (See Appendix B-27.)
DATA TRACK xxxxxxxx ON ALT.
DATA BEGINNING AT LINES xxxx AND yyyy HAS BEEN
ASSIGNED THE SAME NAME nnnn
Explanation: A duplicate name has been
detected while generating the index.
Variable information xxxx and yyyy contain
the numbers of the lines in which duplicate
names appear. variable information nnnn
contains the parcel name which is
duplicated.
Conversational Action
User: N/A
System: Index generation terminated.
Nonconversational Action
User: N/A
System: Index generation terminated.
Reference Data
Requirement determined by: CGCKB
Variable data supplied by: CGCKB
Message Residence: CGCKB
yyyyyyyy
Explanation: Track xxxxxxxx is defective, and
the data is actually on alternate yyyyyyyy.
processing continues. This message applies
to SAM formatted DASD only.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data
Requirement determined by: CEBDP
Variable data supplied by: CEBDP
Message Residence: CEBDP
Message issued by: CEBDP
Destination
Conversational: N/A
Nonconversational: MSG DEVICE
Transmittal technique: I/O package for
Independent Utility programs.
397
DA01 DDNAME MISSING CANCELLED
Explanation: The user issued a DDEF command
without a data definition name.
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
DA02 DDNAME ddname INVALID form cancelled:
Explanation: The user has entered an invalid
data definition name. The name must be
one-to-eight aplhameric characters, the
first of which is alphabetic.
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see A~pendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
DA04 CANCELLED: DSNAME EXCEEDS 35 CHARACTERS
Explanation: The data set name cannot be
longer than 35 alphameric characters.
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
DA05 CANCELLED: DSNAME EXCEEDS 26 CHARACTERS FOR
GENERATION DATA GROUP
Explanation: The data set name for a
generation data group cannot exceed 26
characters.
Filter code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see AFpendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
DA06 CANCELLED: DSNAME EXCEEDS 44 CHARACTERS FOR
OS/360 DSNAME
Explanation: An OS/360 data set name may not
be longer than 44 alphameric characters.
Filter Code: WRA
Conversational Action
User: N/A
398
system: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
DA07 CANCELLED: DSNAME CONTAINS INVALID RELATIVE
GENERATION NUMBER
Explanation: A generation data set has been
specified with an invalid relative
generation number.
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
DAOS CANCELLED: DSNAME CONTAINS INCORRECT NUMBER
OF PARENTHESES
Explanation: The data set name parameter in
DDEF command contains an incorrect number of
parentheses.
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
DA09 CANCELLED: DSNAME CONTAINS INVALID QUALIFIER
SPECIFICATION
Explanation: The indicated data set name
contains an invalid qualifier specification,
or a qualifier is missing.
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
~AI0 CANCELLED: DSNAME CONTAINS QUALIFIER THAT
EXCEEDS 8 CHARACTERS
Explanation: A qualifier in a data set name
may not exceed 8 characters.
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by:
N/A
DA11 CANCELLED: DSNAME CONTAINS QUALIFIER WITH
NON-ALPHABETIC FIRST CHARACTER
Explanation: A qualifier for a data set name
must begin with an alphabetic character.
Fi Iter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
DA12 dsname NOT FULLY QUALIFIED DSNAME.
REENTER.
Explanation: The user is prompted to enter a
correct data set name.
Filter Code: WSA
Conversational Action
User:
Specified in text of message.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
DA17 CANCELLED: DEVICE TYPE type INVALID
Explanation: One of the following incorrect
conditions exists in the unit operand:
(1)
TA is not followed by 7, 7DC, or 9; (2) DA
is not followed by 2311, 2302, or 2314; or
{3} a unit record device is specified with
dsorg other than MS or RX.
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by:
CZAEA
DA18 CANCELLED: SPACE TYPE type INVALID
Explanation: The space type must be TRK, CYL,
or a decimal number between 1 and 32767.
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
DA19 CANCELLED: PRIMARY ALLOCATION number INVALID
Explanation: Primary allocation must be a
one-to-three digit decimal number.
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
DA20 CANCELLED: SECONDARY ALLOCATION number
INVALID
Explanation: Secondary allocation must be a
one-to-three digit decimal number.
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
DA21 CANCELLED: VOLUME OPTION value INVALID
Explanation: The volume value must be PRIVATE,
PUBLIC, or a one-to-four digit volume
sequence number.
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
DA22 CANCELLED: SPACE VALUE value INVALID
Explanation: The only valid value for space is
HOLD.
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by:
CZAEA
DA23 CANCELLED: VOLUME SERIAL NUMBER number
INVALID
Explanation: The volume serial number must be
specified as one-to-six alphameric
characters.
Filter Code: WRA
Conversational Action
User: N/A
399
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
DA24 CANCELLED: FILE SEQUENCE NUMBER number
INVALID
EXplanation: The file sequence number must be
specified as a decimal number no higher than
9999.
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
DA25 CANCELLED: LABEL TYPE INVALID
Explanation: Valid label type codes are
ALCASCII-labelled), AUL (ASCII
user-labelled).
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
DA26 CANCELLED RETENTION PERIOD number INVALID
Explanation: Days for retention must be
specified as a four-digit decimal number.
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
DA27 CANCELLED: DISP VALUE value INVALID
Explanation: Valid DISP codes are OLD, NEW, or
MOD.
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
400
DA31 CANCELLED: data definition name. SYSTEM
RESERVED DDNAME
Explanation: The user specified a data
definition name which is prefixed by $$$,
SYS, or LPC: these prefixes are reserved for
system use.
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
DA32 CANCELLED: RETENTION PERIOD number INVALID
Explanation: Days for retention must be
specified as a four-digit decimal number.
Filter Code: WRA
Conversational Action
User: N/A
System: Awai ts next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
DA34 CANCELLED: DSORG value INVALID
Explanation: Valid data set organization
values are: MS (MSAM), PS (physical
sequential), RX (IOREQ), VI (virtual
indexed), or VS (virtual sequential).
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
DA35 CANCELLED: PRIMARY ALLOCATION VALUE MISSING
Explanation: In the SPACE parameter, the space
type was not defaulted to pages, so primary
allocation is required.
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
DA36 CANCELLED: UNIT VALUE value INVALID
Explanation: In the unit operand, the second
element is not DA, TA, PR, RD, PC, or SDA (a
four digit hexadecimal number).
Page of GC2B-2037-7, Issued Feb. 1, 1972 by TNL GN2S-3207
Filter Code: WRA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
Syst~t
Continues processing_
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
DA37 DSNAME MISSING. ENTER DSNAME
Explanation: The user issued a DDEF command
with no data set name.
Filter Code: XRA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
DA38 CANCELLED:
OPTION PARAMETER option INVALID
Explanation: Valid option values are JOBLIB
(for job library) and CONC (for
concatenation).
Filter Code: WSA
Conver~ational Action
Use.r:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
R:ierence Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
DA41 CANCELLED: DDNAME data definition name IN DCB
PARAMETER INVALID
Explanation: The data definition name {ddname}
in the DCB parameter is not one-to-eight
alphameric characters with the first
character alphabetic, prefixed with an
asterisk.
Filter code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
VariaLle data supplied by: CZAEA
DA43 CANCELLED: DeB VALUE value INVALID
Explanation: In the DCB sub-parameter list,
the element following the keyword is not in
the list of valid entries, or does not meet
specifications.
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System:
continues processing.
Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by~ CZAEA
~eference
DA44 CANCELLED: INVALID 05/360 DSNAME
Db .. ·o, CANCELLED:
.. ILl::.::8 SEQUENCE NUMBER EXCEEDS
NUMBER O.F VOJ"UMES
The user specified a smaller
number of volumes than the number specified
as a volume sequence number.
Filter Code: WRA
Conversational Action
User:
N/A
System: Awaits next command.
Nonco:,versational Action
--. Uf;:;r:
N/A
S·:stem: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
f~£lanation:
OMO CANCELLED: VOLUME SEQUENCE NUMBER number
.CNlfAL1D
EXQlanation: The volume sequence number must
be a one-to-four digit decimal number.
f'ilter Code: WRA
,::onversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
.
System: Continues processing.
Explanation: The user entered an OS/360 data
set name which did not meet OS/360
specifications.
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
DA45 CANCELLED: USERlD use rid NOT JOINED; SHARED
DATA SET NOT IN SYSTEM
Explanation: The defined data set name's user
ID was not found in the user's catalog •
Filter codel WRA
Conversational Action
User: N/A
System: Awaits next corr~and.
Nonconversational Action
User: N/A
System: continues processing_
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
Page of GC28-2037-7, Issued Feb. l, 1972 by TNL GN28-3207
DI\46 CANCELLED: RET VALUE value INVALID
Explanation: Valid RET values are listed
below.
The user is cautioned that they may
be specified in any combination and will be
processed in the order specified by the
user ..
(delete at close)
(delete at logoff)
P (permanent)
R (read-only access)
T ( temporary)
U (unlimited access)
WRA
Filter Code:
~QJlVersational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
N
N
N
N
N
N
C
L
De14 CANCELLED: KEYWORD PRECEEDING value MISSING
Explanation: An unidentifiable keyword value
was found in the data set name parameter.
Filter Code:
WRA
ConverS2tional Action
U";er:
N/A
Syc:;!-em:
Awaits next command.
~2~~9~Y~~Fsational Action
Use1-:
N/A
::3ystJ'm:
continues processing.
g:,-fe~~flce. Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
;Ct '; elem,~nt NOT VALID KEYWORD.
l-\LEHAND O,(EY'elORD AND VALUE)
J'l~.Ela!!~U:ion:
REENTER
DC19 Cl',NCELLED: FORMAT OF PARAMETER INVALID
Explanation: The foz~t of the data set name
parameter is invalid.
Filter Code: WRA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see .Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
DC20 CANCELLED: FORMAT OF PARAMETER INVALID
Explanation: The format of the data set name
parameter is invalid.
Fil.ter Code: WRA
Conversational Action
User:
N/A
Syste,1,; Awaits next command.
Nonconversational Action
User:
N/A
system:
Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by:
CZAEA
variable data supplied by:
N/A
DC2l CANCELLED: FORMAT OF PARAMETER INVALID
E~lanation:
The format of the data set name
parameter is invalid.
Filt('r Code: WRA
~On2Jsrsational Action
User: N/A
System:
Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by:
CZAEA
Variable data supplied by: NIA
The user is prompted to enter an
operi'-'ld wi.th the correct keyword.
Filt_er Code:
XSA
Conversational Action
--- User:
Specified in text of message.
System:
waits for user's response and.
after receiving it, continues processing.
-:")Dversdtional Action
User:
N/A
:;~"',"m:
Task is abnormally terminated.
He~!::£~.nce Data (Also see Appendix B-14.)
ReJII: Awaits next command.
NoncoilVeroational Action
User: - N/A
System: Continues processing_
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
De2S CANCELLED, FORMAT OF PARAMETER INVALID
Explanation: The format of the data set name
parameter is invalid.
Filter Code: WRA
Conversational Action
Usera N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix. B-14.)
Requirement determined by: CZAEA
V~riable data. supplied by:
N/A
DC29
CANCELLED: FORMT OF PARAMETER INVALID
Explanation: The format of the data set name
parameter is invalid.
Filter Code: WRA
Conversational Action
User: N/A
System; Awaits next command.
Nonconversational Action
User: N/A
£ystem. continues processing.
Reference Data (Also Bee Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied bY2 N/A
'J CANCELLED: KEYWORD keyword INVALID
An invalid keyword (value
r:eceding an equal Sign) was found in the
Gata set name parameter.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
0:)Dconveraational Action
Usen N/A
System: Continues processing.
0eference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
~).i'mation:
DC3l CANCELLED. SYMBOLIC
INVALID
D~~CB
ADDRESS address
Explanations The user-specified symbolic
devIce address was not found in the Symbolic
DD04
FOR
PROCEEDING: VOLUME SEQUENCE NUMBER IGNORED
DATA SET
VAM
Explanation: The user entered a volume
sequence number for a data set organization
I,tiler than a virtual access method.
filter Codel IRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: . N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
DD05 PROCEEDING: SPACE PARAMETER IGNORED FOR
CATALOGED DATA SET
Explanation I The user specified the space
parameter when space information was alrea.dy
cataloged.
F Iter Codel IRA
Conversat onal Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference pata (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
DD06 PROCEEDINGf UNIT PARAMETER IGNORED FOR
CATALOGED DATA SET
ExPlanation: Although the user specified the
unIt parameter the device information was
taken from the catalog entry.
Filter Codel WRA
Conversational Action
General Messages
403
page of GC28-2037-7, Issued Feb. 1, 1972 by TNL GN28-3207
User:
N/A
System: Awaits next coromand.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by:
N/A
DDO? PROCEEDING: VOLUME SERIAL NUMBER IGNORED FOR
CATALOGED DATA SET
Explanation: Although the user specified the
volume serial number, volume information was
taken from the catalog entry.
Filter Code: IRA
Conversational Action
User:
N/A
System: Awaits next command.
Noncanversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by:
CZAEA
Variable data supplied by: CZAEA
system: continues processing.
Reference Data (Also see Appendix B-lII.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
DD13 PROCEEDING: DDNAME ddname REPLACED BY new
ddname. NO OTHER CHANGES MADE.
Explanation: The user has given a new data
definition name to a previously defined data
set name.
The cnly change made is to the
data definition name.
Filter Code: WRA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System:
continues processing.
Reference Data (Also see Appendix B-14.)
Reguire:~ent determined by:
CZAEA
Variable data supplied by: CZAEA
DD14 CANCELLED: DSORG FOR PCSOUT DATA SET CHANGED
FROM organization TO VI
DD08 PROCEEDING: lABEL PARAMETER IGNORED FOR
CATALOGED DATA SET
~l£I.l.:lanati()!!:
Although the user specified the
label parameter, label information was taken
from the catalog entry.
FiltET Code:
IRA
Con.~r5.atlonal Action
User:
N/A
S~,stem:
Awaits next coromand.
lliln5"o..!:!vc"Fsational Action
UEe:c:
N/A
;-;ystern:
Continues processing.
.l'"Yerence Data (Also see Appendix B-14.)
---- -Reql.li rement determined by: CZAEA
Vdriabh, data supplied by:
N/A
Explanation: The user did not specify the
Program Control System output data set as
virtual indexed.
Filter Code:
IRA
~onversational Action
User:
N/A
System: Awaits next command.
NongQI!y'.ersational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
DD15 CANCELLED: LABEL PARAMETER MUST NOT BE
SPECIFIED FOR VAM DATA SET
DDil CANCELLED: DEVICE TYPE NOT APPLICABLE TO UNIT
EX~lun2tion:
Although the user specified the
device type, device information was taken
from the catalog entry.
l"ilter Code:
IRA
~\versational Action
--rJSel::
N/A
System: Awaits next command.
Non'::_Qr~,,:'§'rsational Action
",'3eo::
N/A
~;y!';tem:
continues processing.
Reference Data (Also see Appendix B-11i.)
--- I'i:equi rement determined by: CZAEA
Variable data supplied by: N/A
Explanation: The user specified a label
parameter that does not apply to a Virtual
Access Method data set.
Filter Code:
IRA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by:
CZAEA
Variable data supplied by:
N/A
DD16 CANCELLED: LABEL PARAMETER IGNORED
DD12 PROCEEDING: OPTION IGNORED FOR PCSOUT DATA
s£,!,
Ex planat_i on:
The user specified an invalid
opt.ion for the Program control System
output.
Filter Code:
IRA
Conversational Action
-User:
N/A
Syst.em: Awaits next command.
Nonconversational Action
User:
N/A
404
Explanation: The user-specified label
parameter information applies only to tape
or direct access devices.
Filter Code:
IRA
Conversational Act,1.on
User: N/A
Syste~:
Awaits next command.
Noncol}versi!!ioI1al_~ction
User:
N/A
System: Continues processing.
Referen~~Dd!~ (Also see Appendix B-14.)
Page of GC28-2037-1, Issued Feb. 1, 1972 by TNL GN28-3207
Requirement determined by.
Variable data supplied byz
CZAEA
N/A
0017 PROCEEDING I SPACE PARAMETER IGNORED FOR
NON-DIRECT ACCESS DEVICE
Explanationl The user specified the data set
name space parameter for a device other than
·direct access.
Filter Codel IRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied bYI N/A
DD1S CANCELLED: OPTION
DSORG.
CONe VALID ONLY FOR PS
Explanation: The user specified OPTION=CONC
for a data set other than a Sequential
Access Method data set.
Filter Code: IRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Refn:ence Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
Conversational I N/A
Nonconversational: operator's Terminal
Transmittal technique: Own I/O routine
DEVICE ADDRESS EQUAL PAGING ADDRESS.
INVALID.
Explanation. Ca~not use paging volume as delta
volume.
Conversational Action
User: Operator enters correct address for
delta volume and/or paging volume.
System: N/A
Nonconversat.ional Action
User: N/A
System: N/A
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: N/A
Message residence: CEIAA
Message issued by: CElAA
Dest.; nation
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: Own I/O routine
DEVICE TYPE IS NOT 2311 OR 2314.
CANCELED.
REQUEST
Explanation: Processing is terminated.
Conversational Action
User~
Reenter command
Reference Data (See Appendix B-21.)
OE02 CANCELLED: SPECIFIED OSORG DOES NOT MATCH
DSORG IN CATALOG
DD311 PROCEEDING: DSNAME data set name. BUP'OFF
IGNORED
The value given for the Sm'OFF
parameter bas been ignored.
i"ilter Code: IRA
conversatIonal Action
User:
N/A
System: Awaits next command.
Nonconversatlonal Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
- ReqUirement determined by: CZAEA
7ariable data supplied by: CZAEA
J:~~Janation:
Explanation: The user specified a data set
that is already cataloged. The data
definition has been issued with a different
data set organization.
Filter Codel WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational A~tion
User: N/A
System: Continues processing.
Reference Data (Also see Appendlx B-14.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
DE04 CANCELLED: PCSOUT MUST BE A NEW DATA
DEL'fJl. (h'l'A SETS?
f:XElanation: User answers Y (yes) if he wants
to use alternate versions of SYSIVM and/or
RESSUP CSEers (including alternate versions
of VMLOAD and/or RCLOAD. if desired),
Jnversational Action
Enter Y or N at operator's terminal.
System: N/A
Nonconversational Action
Userl N/A
System: N/A
Reference Data
Requirement determined by t CElAA
Variable data supplied by': N/A
Message residence. CElAA
Message issued by I CElAA
Destination
User:
SET
Y OR N
Explanation: The user has either not specified
the Program Control system output data Bet
as new, or specified a duplicate data set
name for PCSODT.
Filter codel WRA
Conversational Action
User: N/A
System; Awaits next command.
Nonconversational Action
User. N/A
System: continues processing.
Reference pata (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by~ N/A
DE05 CANCELLED. DISP-MOD UNAUTHORIZED
General Messages
405
Page of GC28-2037-7, Issued Feb. 1, 1972 by TNL GN28-3207
~~~natiog:
The catalog access qualifier will
not. allow the user to modify the data set.
Filter Code: WSA
Co~versational Action
User:
N/A
System: Awaits next command.
NO~9onversational Action
User:
N/A
System: Continues processing.
Refenmce Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
DE06 CANCELLED: DSNAME UNKNOWN
Exp],-C!uation:
The user attempted to use a data
set name that could not be found in the
catalog. did not have a disposition of new,
had no volume serial number given, and did
not have unit specified as RD.
Filter Code: WRA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
Syst.em: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
DE10 ENTER NAME OF DATA SET
Ex£l~!l.0.-"io£l:
You must enter a data set name so
DDEF may be completed.
Filter Code: XSA
User:- Specified in text of message.
:oystem: Waits for user's response and,
after receiving it, continues processing.
~g.ncol1"y~'.J:£~tional Action
User:
N/A
';Y' t"n;
'Task is abnormally terminated.
Yi.0.ferlnCe Da'ta (Also see Appendix B-14.)
, ., R~~(iuLre;-n0r;t' determined by: CZAEA
',Jar.}.'ible data SUPI/lied by:
N/A
t.hdt
DEt!i
CANCELLED: UNIT TYPE INVALID roR VAM DATA SET
,f'~),,--i:lnat.i,on:
The user issued a Virtual Access
Metbod data set organization for a unit that
',~
~:,;;_r
note a direct access device.
Code:
WRA
"-"::'fI5}nal Action
N/A
System:
Awaits next command.
NOHconversational Action
-- User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
(equirement determined by: CZAEA
Variable data supplied by: N/A
Svstem: Awaits next command.
Nonc;:'nversational Action
User:
N/A
System: continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
DE20 CANCELLED: VOL SEQ NO INVALID; NOT SAM DATA
SET ON TAPE OR DIRECT ACCESS
Explanat;ion: The user issued a data set name
volume sequence number t.hat does not apply
to sequent,ial access method data set on tape
or direct access.
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
system: continues processing.
Reference Da~a (Also see Appendix B-14.)
--Requirement determined by: CZAEA
Variable data supplied by:
N/A
DE21 CANCELLED: VOLUME SEQUENCE NUMBER IS INVALID
Explanation: The user issued a data set name
volume sequence number that did not have a
physical sequential (PS) data set
organizat.ion or an old disposition.
Fiit,er Code: WRA
fonversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
DE23 CANCELLED: FILE SEQUENCE VALID ONLY FOR TAPE
DATA SET
Explanation: The user issued a data set name
file sequence number in the LABEL operand,
but did not specify the unit as tape.
Filter Code: WRA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by:
N/A
DE2S CANCELLED: VOLUME volume CANNOT BE FOUND
[£1(. CANCELLED: VOLUME PARAMETER MISSING FOR
ur',:::,
,'!\LOGED
DATA SET
Exp,bmation: The user specified unit as tape
without specifying ·private- or giving a
volume serial number.
Filt.er Code: WRA
col1veisatiOnal Actio~
User:
N/A
406
Explanation: The volume with the
user-specified data set name could not be
found.
Filter Code: ~~
Conversational Action
User: N/A
System: Awaits next command.
Nonconversati~nal Action
User: N/A
Page of GC28-2037-7, Issued
System: continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: CZAEA
F~b.
1, 1972 by
Requirement determined by:
Variable data supplied by:
TNL GN28-3207
CZAEA
N/A
CANCELLED: UNIT MUST BF. TA OR DA FOR
CONCATENATION
DE34
DE29 CANCELLED~ VOL SEQ NO INVALID; NOT SAM DATA
SET ON TAPE OR DIRECT ACCESS
Explanation: The user issued a data set name
volume sequence number that does not apply
to sequential access method data set on tape
or direct access.
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
Explanation: The user specified OPTION '" CONe
for a unit other than tape (TA) or direct
access (DA).
Filter Code: WR.A
fonversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix £-14.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
CANCELLED: VOLUM£'=PRIVATE VALID ONLY FOR NEW
DATA SET
DE3'!
The user specified VOLUME"'PRIVATE
for a data set that was in the cataloq and
not a scratch volume. VOLUME=PRIVATE may be
specified for a scratch volume in it da":J set
that is not in the catalog. Serial numbers
may be specified for uncataloged dat_a sets
alno. Volume information is not needed for
old data sets.
Filter Code: WRA
Conversational Action
Explan~c;m:
DE31 CANCELLED: DDNAME UNKNOWN FOR CONCATENATION
Explanation: The user-specified data
definition name was not found in the Task
Data Definition Table for concatenation.
Filter Code: WRA
Conversational Action
- User: N/A
Syst.em: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Feference Data (Also see Appendix B-14.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
·1';32 CANCELLED:
lJlcler:
N/A
Awaits next command.
Nonconversational Action
SYGtem:
--'--Us eX-:
N/ A
System: continues processing.
Reference Data (Also see Appendix B-,14.)
Requirement determined by: CZAEA
Variable data supplied by: N/A
CONCATENATED DATA SET MUST BE SAM
OH.!-4.r'\T
concatenation only applies to
E:"<:9uerl!ial access method data sets (for
example, DSORG=PS).
E'ilter Code: WSA
Conversational Action
-, User: N/A
System: Awaits next command.
"for.conversational Action
User: N/A
System: Continues processing.
±ief::,Lence ~ (Also see Appendix B-14.)
Hequirement determined by: CZAEA
Variable data supplied by: N/A
Explana~~on:
DE38 CANCELLED:
IN CATALOG
DSORG IN DeB DOES NUl' MATCH DSORG
Expl4.!Jation: The user specified a datd control
block that is not consistent with t:he
catalog data set organization.
Filter Code: WRA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
--User: N/A
System: Cont.inues procesGing,
Reference Data (Also see Appendix B"l',,)
Requirement determined by: CZAEp..
Variable data supplied by: N/A
,U CANCELLED: DATA SET MUST BE OLD FOR
,:1, 'll,'l'ENATION
DEtlO CANCELLED:
The user attempted to concatenate
a data set without specifying the
disposition as old.
Filter Code: WRA
Conversational Action
.
User: N/A
,-System: Awaits IlR::{l, command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix £-14.)
_~;xplanation:
UNIT SPECIFIED IS INVAL1.D 1"0,(
03/360 DATA SET
Exp1y:-;t_~~a..!-_a
(Also see Appendix B-14.)
Fe" -ltreW<'2nt determined by:
CZAEA
'.I.:: \ -l.hle data supplied by'
N/A
'JFI'i CP,NCELLED:
'::){I·19'!~Clt.iQl}:
ILLEGAL DELIMITER IN PARAMETER
The user either has a delimiter
toll(YNing an equal sign, or an equal sign is
not preceded hy a keyword.
}'i_U.~.:!:_l'~~cl_~:
WRA
C")11.1I~~'iil.!:i2na 1 Action
User:
N/A
'~ystE'm:
Awaits next command.
,~J_2!l~::_~)_D..Y~.!_sat.i onal Action
q';er,
N/A
:;y,,~_em:
continues processing.
B..~'::'.E~l1(.:e Data (Also see Appendix B-14.)
fystem: Waits for user's response ann,
after receiving it, continues processing.
Conversational 1'.ction
User:
Enters proper data set name.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: Task abnormally terminated if error
occurs in COD, CATALOG, CDS, DATA,
MODIFY, PERMIT, or SHARE command; if it
occurs in DSS?, processing continues with
the next data set name of the command -task is abnormally terminated, however,
if only one data set. name is entered and
it is faulty.
(Not applicable to BACK,
DELETE, ERASE, EXECU'l'E, LOGOFF, QUIT, ox
RELEASE commands.)
Reference Data (Also see Appendix £-14.)
Requirement determined by: CZABB, CZABC,
CZADF, CZAEG, CZAEI, CZAEJ, CZAEL, CZAFH,
CZA},'I, CZAFJ. CZAFL, CZAFN, CZAFS, or
CZAFV
Variable data supplied by: CZABB, CZABC,
CZADF, CZAEI, CZAEJ, CZAEL, CZAFI, CZAFJ,
CZAFL, CZAFS, or CZAFV
D014 NUMBER OF
G~~ERATIONS
IS INVALID
Explanation: The number of generations
specified does not conform to the rules for
the CATALOG command.
Filter Code:
XSA
ConversatIOnal Action
User:
N/A
SYn,n.ion:
-
An invalid data set name was
in a bulk I/O command.
ilt~r code:
WSA
- --- --------;;:i~Jt~E-;-;::ed
.L~on~'.c'! ..'L~ ionaL~c:!ion
Enters correct:
Us'··,..:
dat~a
set name.
Sy:::;tJ"'rr:
v;a.it_:.:; for user's response; after
If'cc:iving it, continues processing.
!'-~:_~:~~<:~~~"~. ~~.~.~:!_ t ional_,_Act l-Ol~.
(J:~ (~1" :
N."'" A
System:
V~rlaLle
n01
C,
OSU/\I"£
'fhe t,lsk is terminated~
IAlso see Appencix B-14.)
d("t.ermined by:
CZABD
data supplied by:
CZABD
dsname NOT UNIQUE. REEN'rER.
A redundant data set name was
n a bulk I/O command.
WSA
::'~~o,~_~'.'-'-.'-=- ~O,.~ I ..A'::!oj:.2Il
unique data set name.
for fJs(~rts response; aft_er
r eceiv.inq its continues processing ..
_~-~ :..!ll cC:iJ...~!::.!~E~~!-.:\_~~_~~l.~~ t i O!}
User:
N/A
},Y'1tem: The task is terminated.
c(;,ferenc.' Data (Also see Appendix B-14.)
~"-i{c'71lrr;~:n\(;nt~ determined by:
CZABD
'v',',e,able data supplied by:
CZABD
tiT';
"ew;
')(038
l)SNAME
L'Ltit~~
,Lname NON-EXISTENT. REENTER.
l';~!AGNETIC TAPE
Explanation: This message is issued to SYSOUT
of the task created for PRINT, and indicates
that the specified types of data set must be
on tape.
Filter code: WSA
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: Task terminated by LOGOFF.
Reference Data (Also see Affendix B-14.)
Requirement determined by: CZABG
Variable data supplied cy: N/A
D215 CANCELLED: INPUT MUST BE
VSA~
OR VISAM
EXplanation: Data set does not have virtual
sequential or virtual indexed sequential
organization.
Filter Code: WSA
Conversational Action
User: N/A
System: continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZABH or CZABI
Variable data sUfplied by: N/A
D216 CANCELLED: NO ASA OR MACHINE CODE CONTROL
CHARACTERS IN DCB
Explanation: This message is issued to the
SYSOUT of the task created for PRINT, PUNCH,
or WT commands. EDIT was specified in
command, but data set control block (DSCB)
does not indicate ASA (USASI) or machine
code character.
Filter Code: WSA
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: Task terminated by LOGOFF.
Reference Data (Also see Afpendix B-14.)
Requirement determined by: CZABG, CZABH, or
C'ZABI
Variable data supplied by: N/A
D225 CANCELLED: LINE DATA SET MAY NOT EXCEED LINE
NUMBER 9999900
Explanation: This message is issued to the
SYSOUT of the task created for RT. Line
data set exceeds 100,000 records.
Filter Code: WSA
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: Task terminated by LOGOFF.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEF
Variable data supplied by: N/A
D227 TERMINATED: name ERROR, RECORD integer,
LENGTH integer
Explanation: This message is issued to the
SYSOUT of the task created for PRINT, PUNCH,
RT, or WT commands. It indicates the tYfe
of error, identifies the record number, and
gives the record length.
Filter Code: WSA
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: Processing continues for PUNCH, RT,
or WT task. PRINT task is terminated by
LOGOFF.
Reference Data (Also see Appendix B-14.)
Reguirement determined by: CZABF, CZAEG,
CZABH, or CZABI
Variable data supplied by: CZABF, CZAEG,
CZABB, or CZABI
D228 TERMINATED:
UNRECOVERABLE READ ERROR
Explanation: This message is issued to the
SYSOUT of the task created for PRINT or RT.
Filter Code: WSA
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
Systerr,: Task terminated by LOGOFF.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZABF or CZABG
Variable data supplied by: N/A
D229 TERMINATED:
command TASK BSN integer
Explanation: This message is issued to the
SYSOUT of the task created for PRINT, PUNCH,
RT, or WT.
Filter Code: WSA
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: Task terminated by LOGOFF.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZABF, CZABG,
CZABH, or CZABI
Variable data supplied by: CZABF, CZABG,
CZABH, or CZABI
D231 TER~INATED: OUTPUT DATA SET CANNOT BE
PROPERLY CATALOGED
Explanation: This message is issued to the
SYSOUT of the task created fcr WT or RT, and
for the latter is always followed by an
explanatory message. This message indicates
that CATALOG was unable to catalog the data
set.
Filter Code: WSA
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: Bulk I/O continues.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZABF or CZABI
Variable data supplied by: N/A
431
D232 CANCELLED: LRECL
DATA SET
> MAXIMUM ALLOWED FRO LINE
Explanation: The user specified a line data
set, but record length exceeds 120
characters.
Filter Code: WSA characters.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: Task terminated by LOGOFF.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZABF
Variable data supplied by: N/A
D299 RESPONSE INVALID--VALID RESPONSES ARE Y,N
--REENTER
Explanation: The user has entered a response
which is not correct.
Filter Code: XSA
Conversational Action
User: Enters Y or N.
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCAA
Variable data supplied by: N/A
D300 CANCELLED: DDNAMES STARTING WITH SYS (EXCEPT
SYSULIB) ARE PROTECTED
D234 CANCELLED:
IDENTIFIED
INPUT DEVICE TYPE CANNOT BE
Explanation: This message is issued to the
SYSOUT of the task created for PRINT, PUNCH,
RT, or WT. The device used for input of the
data set cannot be identified, using stored
list of device codes.
Filter Code: WSA
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: Task terminated by LOGOFF.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZABF, CZABG,
CZABH, or C ZABI
Variable data supplied by: N/A
Explanation: A TSS/360 convention reserves
data definitions beginning with the letters
SYS for system use. Data sets so named may
not be erased or released.
Filter Code: WSA
Conversational Action
User:
N/A
System: Command canceled. Processing
continues for next command.
Nonccnversational Action
User: WA
System: Command canceled. Precessing
continues for next command.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEJ or CZAFJ
Variable data supplied by: N/A
D301 NO PRIVATE DEVICE AVAILABLE FOR volume AT
THIS TIME WIIL YOU WAIT?
D235 COMPLETED:
SHORT RECORDS SKIPPED integer
Explanation: This message appears on SYSOUT of
PRINT, PUNCH, or WT task, and indicates the
numLer of records that ended before the
specified start byte was reached.
Filter Code: WSA
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: Bulk I/O continues.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZABG, CZABH, or
CZABI
Variable data supplied by: CZABG, CZABH, or
CZABI
D29A INVALID--N ASSUMED
Explanation: The user has entered an incorrect
or improper value; N is assumed.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CZCAA
Variable data supplied by: N/A
432
Explanation: Other tasks are using the private
devices. The request may £e cancelled by
fressing the Attention key.
Filter Code: XSA
Conversational Action
User: Enters Y or N.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZCAA
Variable data supplied by: CZCAA
D302 PRIVATE VOLUME volume identification IS IN
USE BY userid. WILL YOU WAIT?
Explanation: There is an outstanding DDEF for
a data set on this volume by another task.
Filter Code: XSA
Conversational Action
User: Enters Y or N. A Y reply may be
cancelled by pressing the Attention key.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZCAA
Variable data supplied by: CZCAA
D303 TERMINATED: code NON-NUMERIC COUNT.
Explanation: The designated number of devices
required is syntactically invalid.
Filter Code: WSA
Conversational Action
User: N/A
System: Continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAFU
Variable data supplied by: CZAFU
D304 TERMINATED:
INVALID DELIMITER.
Explanation: An invalid operand delimiter has
been encountered (for example, close
parenthesis is missing).
Filter Code: WSA
Conversational Action
User: N/A
System: Continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix £-14.)
Requirement determined by: CZAFU
Variable data supplied by: N/A
Filter Code: WSA
Conversational Action
User:
N/A
System: processing continues with next
command.
Nonconversational Action
User: N/A
System: Command canceled.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEG
Variable data supplied by: N/A
D311 CANCELLED: MEMBER NAME GIVEN FOR
NON-PARTITIONED DATA SET
Explanation: User has appended a member name
to a nonpartitioned data set name.
Filter Code: WSA
Conversational Action
User: N/A
system: Processing continues with next
command.
Nonconversational Action
User: N/A
System: Command canceled.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEG
Variable data supplied by: N/A
D312 CANCELLED:
SPECIFIED
DS NOT A LINE DATA SET THOUGH L
D305 CANCELLED: VOLUME NOT ON DIRECT ACCESS
Explanation: The requested volume is not
available to the user.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues as specified
in text.
Nonconversational Action
User: N/A
System: Processing continues. Command
ignored.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZADF
Variable data supplied by: N/A
Explanation: The data set was found to have a
different organization from that specified.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues with next
command.
Nonconversational Action
User: N/A
System: processing continues with next
command.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEG
Variable data supplied by: N/A
D313 CANCELLED: MEMBER NOT VISAM
D306 INVALID term-REENTER: USERID=~______
FOLLOWED BY A COMMA AND MESSAGE TEXT
Explanation: You must enter: USERID=_________
followed by a comma and then the message
text.
Filter Code: XSA
Conversational Action
User: Specified in text of message.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZACF or CZAFL
Variable data supplied by: CZACF or CZAFL
D310 CANCELLED: DATA SET NOT VISAM OR VPAM
Explanation: The data set to be modified must
have virtual indexed sequential or virtual
partitioned organization.
Explanation: The organization of the If,ember of
the partitioned data set is not virtual
indexed sequential.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues with next
command.
Nonconversational Action
User: N/A
System: Processing continues with next
command.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEG
Variable data supplied by: N/A
D314 PROCEEDING: LINE CANNOT BE ANALYZED. ENTER
NEXT LINE
Explanation: An error in last-entered
modification line prevents system from
carrying out requested action.
433
Filter Code: WSA
Conversational Action
User: Specified in text.
System: Processing continues.
Nonconversational Action
User: N/A
System: Precessing continues; last-entered
line is ignored.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEG
Variable data supplied by: N/A
0315 WRONG KEY LENGTH.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues.
Nonconversatibnal Action
User:
N/A
System: Processing continues.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEG
Variable data supplied by: N/A
C323 CANCELLED: data set name NOT MOUNTED.
DDEF TO MOUNT VOLUME.
ENTER NEXT LINE.
Explanation: For a non-length VISAM data set
the key entered in last line does not agree
in length with that specified by KEYLEN
operand.
Filter Code: WSA
Conversational Action
User: Specified in text.
System: Processing continues.
Nonconversational Action
User: N/A
System: Processing continues with next
line. Last line is ignored.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEG
Variable data supplied by:
N/A
ISSUE
.Explana tion: Either no drives are availatle to
If,ount your VOlume, or the operator replied
"N" to the mount request.
Filter Code: WSA
Ccnversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEI
Variable data supplied by: CZARI
D324 CANCELLED: dsname NOT CATALOGEC
0316 UNEXPECTED ACCESS METHOD TROUBLE.
LINE OR ENTER NEXT LINE.
REENTER
Explanation: A system error prevents
acceptance of last-entered line; for
example, line cannot be inserted in data
set.
Filter Code: WSA
Conversational Action
User: Specified in text.
System: Processing continues.
Nonconversational Action
User: N/A
System: Processing continues with next
line. Last line is ignored.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEG
Variable data supplied by: N/A
0317 TERMINATED: SECOND LINE NOT FOUND
Explanation: Key specified is outside range of
data set being modified, when a review or
deletion was entered.
Filter Code: WSA
Conversational Action
User: Specified in text.
Systeffi: Processing continues.
Nonconversational Action
User: N/A
System: Processing continues with next
line. Last line is ignored.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEG
Variable data supplied by: N/A
D319 REQUESTED ACTION TAKEN BUT UNABLE TO REVIEW
Explanation: The action requested by
last-entered line has been performed but
system cannot review the line affected.
434
Explanation: The data set name indicates a
generation data group for which no index
exists in the catalog.
Filter Code: : WSA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: Command ignored.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEI
Variable data supplied by: CZAEI
D325 CANCELLED: ONLY ONE OPERAND REQUIRED
Explanation: User has entered a data
definition name that does not refer to a
concatenation, and he has given a data set
nall'e.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues with next user
con;mand.
Nonconversational Action
User:
N/A
System: Processing continues with next
command on SYSIN.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAFJ
Variable data supplied by: N/A
D330 CANCELLED: NOT A LINE DATA SET
Explanation: The data set specified by LINE?
OR CDD operand is not a line data set Cand,
by implication, not a language processor
listing data set either}.
Filter Code: WSA
Conversational Action
Fage of GC28-2037-7, Issued Sept. 30, 1972 by TNL GN28-3220
User: N/A
System: Processing continues with next user
entry.
Nonconversational Action
User: N/A
System: Processing continues with next
command on SYSIN.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEM or CZAFS
Variable data supplied by: N/A
0332 CANCELLED:
PUBLIC S'rORAGE.
may not do this for a generation data group.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
system: Command ignored.
Reference Data (Also see Appendix B-14.)
Requirement. determined by: CZAEI
Variable data supplied by: N/A
DATA SET DOES NOT RESIDE IN
Explanation: User has issued an execute
command for a data set which resides on
private storage.
Filter code: WSA
Conversational Action
User: N/A
System: Command cancelled
Nonconversational Action
User: N/A
System: Processing continues with next
command on SYSIN.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZABB
Variable data supplied by: N/A
D337 CANCELLED: USER NOT UNDER YOUR AUTHORITY.
Explanation: Administrator has entered a LINE?
or QUIT command for a user not under his
administration.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues with next
command entry.
Nonconversational Action
User: N/A
system: Processing continues with next
command on SYSIN.
(Not applicable to
QUIT command.)
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEM or CZAFL
Variable data supplied by:
N/A
D341 CANCELLED: dsname NOT YOURS TO DELE'rE.
Explanation: The user attempted to delete a
data set not belonging to him.
Filter Code: WSA
Conversational Action
User: Enters new command.
system: Waits for new command then
continues processing.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix 8-14.)
Requirement determined by: CZAEJ
Variable data supplied by:
CZAEJ
D342 CANCELLED: GENERATIONS OF GDG MAY BE
CATALOGED BY OWNER ONLY.
Explanation: User attempted to enter
generations of generation data group for
which no index exists in his catalog. A
sharing user, even with unlimited sharing,
D345 FIRST DSNAME dsname HAS BLANKS, INVALID
CHARACTER OR INVALID QUALIFIER. REENTER.
Explanation: An error has been made in the
entry of the input data set name.
Filter Code: WSA
Conversational Action
User: Specified in text of message.
System: Waits for user's response and,
after receiving it. continues processing.
Nonconversational Action
User:
N/A
System: Task is abnormally terminated.
Reference Data (Also see AFpendix B-14.)
Requirement determined by: CZABD
Variable data supplied by: CZA8D
D346 SECOND DSNAME dsname INCORRECT.
REENTER.
Explanation: The name of the data set being
written is incorrect.
Filter Code: WSA
Conversational Action
User: Specified in text of message.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZABD
Variable data supplied by: CZABD
D347 SECOND DSNAME dsname NOT UNIQUE.
REENTER.
Explanation: The name of the data set being
written must be unique.
Filter code: WSA
Conversational Action
User: Specified in text of message.
System: Waits for user's response and.
after receiving it, continues processing.
Nonconversational Action
User:
N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZABD
Variable data supplied by: CZABD
D351 SECOND DSNAME dsname HAS BLANKS, INVALID
CHARACTER OR INVALID QUALIFIER. REENTER.
Explanation: An error was made in the entry of
the name of the data set that is being
written.
Filter Code: WSA
Conversational Action
User: Specified in text of message.
System: Waits for user's response and,
General Messages
435
page of GC28-2031-1. Issued Sept. 30, 1912 by TNL GN28-3220
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-1Q.)
Requirement determined by: CZABD
Variable data supplied by: CZABD
D352 VOLUME ID volume INVALID OR GREATER THAN 6
CHARACTERS. REENTER.
Explanation: The volume identification given
for the tape should be one- to
six-alphameric characters.
Filter Code: WSA
Conversational Action
User: Specified in text of message.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZABD
Variable data supplied by: CZABD
D353 USERID userid INVALID OR GREATER THAN 8
CHARACTERS. REENTER.
Explanation: User identification of person to
be QUIT is invalid.
Filter Code: WSA
Conversational Action
User: Specified in text of message.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAFL
Variable data supplied by: CZAFL
D354 TAPE TYPE code INVALID. REENTER.
Explanation: The tape type must be 1, 7DC, or
9 if it is specified. If it is defaulted,
it is the installation value specified at
system generation.
Filter Code: WSA
Conversational Action
User: Specified in text of message.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: Task is abnormallY terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZABD
variable data supplied by: N/A
D355 FORMAT OPTION term INVALID. REENTER.
Explanation: The FORMAT parameter on the Data
Descriptor (DATASET) card as detected in a
system card reader does not specify EBCDIC
or BCD, nor does it default the parameter to
EBCDIC.
Filter Code: WSA
Conversational Action
User: N/A
436
System: N/A
Nonconversational Action
User: N/A
System: User's DATASET deck will be flushed
and ignored.
Reference Data
Requirement determined by: CZABD
variable data supplied by: CZABD
Message residence: SYSMLF
Message issued by: CZAWX (as return code
D355 from CZABD; the message itself is
never issued).
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: WTO macro by CZAWX
D351 dsname MEMBER CANNOT BE DELETED.
REENTER.
Explanation: The user is prompted to enter a
valid member name.
Filter Code: WSA
Conversational Action
User: Specified in text of message.
system: Waits for user's response (or for
the entry of the next cORmand when
message states COMMAND IGNORED) and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see AFpendix B-14.)
Requirement determi~ed by: CZAEJ
Variable data sUFFlied by: CZAEJ
D358 PROCEEDING:
dsname NOT YOURS TO ERASE.
Explanation: Data set does not belong to user
and cannot be erased by him.
Filter Code: WSA
Conversational Action
User: Specified in text of message.
system: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see AFpendix 8-14.)
Requirement determined by: CZAEJ
variable data supplied by: CZAEJ
D361 PROCEEDING: DATA SET IGNORED-NOT ON DIRECT
ACCESS.
Explanation: A data set that is not on a
direct access device cannot be erased.
the DELETE command for this data set.
Filter Code: WSA
Conversational Action
User: Enters new ccwmand.
system: Waits for new command, then
continues processing.
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-14.)
Requirement determined ty: CZAEJ
Variable data supplied by: N/A
D362 LINE DATA SET RECORD MAY NOT EXCEED 120
BYTES. REENTER.
Try
Page of GC28-2037-1, Issued Sept. 30. 1912 by TNL GN28-3220
Explanation: The LINE parameter value WLINE"
as specified on the DATASET card cannot be
honored because the expected record length
would be longer than 120 bytes, excluding
line numbering. CZABD has obtained
incorrect record-length information. The
system operator should inspect the DATASET
card for invalid parameters and/or
delimiters.
Filter Code: WSA
Conversational Action
User: N/A
system: N/A
Nonconversational Action
User: N/A
System: The data set is flushed through the
card reader and not entered into the
system.
Reference Data
Requiraneot determined by: CZABD
Variable data supplied by: N/A
Message res1dence: SYSMLF
Message irollied by: CSAWX as error return
code D362 from CZABD.
Destination:
converaational: IVA
Nonconversational: system operator' s
console
Transmittal technique: W'l'O macro by CZAWX
0363 SPACING OPTION term NOT 1, 2, OR 3.
REENTER.
Explanation:: The oser bas entered an incorrect
spacing option.
conversational Action
Filter Code: WSA
Oser: Specified in text of message.
System: Waits for oser's response and,
afterreoeiving it. continues processing_
Nonoonversati0D!! Action
Oser: MIA
System: . 'rask is abIlormal.ly termiDated.
Reference QaU (Also see Appendi.x B-1rt.)
Requirement determined by, CII.BG
Variabl.e data supplied bra CZAB6
D364 1.IIIVALID IlBSPOlISB COOK. RBBIITBR.
Explanatiolu Response to a prompt for a
DELETE, ERASE. or Qorr operand was neither E
nor default.
Filter Code: XSA
ConversatiOllal Act:iClll
User: specified in text of lltesaage.
Syste.: lla.its for Q8U's response and.
after receiving it, continues processing.
ttonconversatioaa1 Action
User: tVA
Systeat: Task is abDormally tenainated.
Reference Data (Also see Appendix B-1rt.)
aequiremeat determined by: CZAEJ or CZAFL
Variable data snpplied by: N/A
D3I>5 TDUUNATED: VOLUME NO'!' IIODN'l'ED.
Explanation: Operator replied no to mount
IDessage.
Filter COde I WSA
conversational Action
User: Specified in text of lDessage.
System: waits for user 4 s response and,
after receiviag it, cantin.es processing.
Nonconversational Action
User: N/A
system: Task is abnormally terminated.
Reference Data (Also see AFpendix B-1ij.l
Requirement determined by: CZAEJ or CZAEN
Variable data supplied by: N/A
D366 CANCELLED: dsname NOT VAM OR SAM
Explanation: The organization of the old or
copy data set does not permit copying.
Conversational Action
User: N/A
System: Comrnand canceled; next command read
from SYSIN.
Nonconversational Action
User: N/A
System: Command canceled: next command read
from sys:n••
Reference Data (Also see Appendix 8-14.)
Requirement. determined by: CZAFV
Variable data supplied by: CZAFY
0369 code DSORG INVALln. REEWIER.
Ey>lanatibn: An invalid data set organization
code has been given in respouse to message
number A09l.
Filter Code: WSA
Conversational Action
User: specified in text of message.
System: Waits for user"s response and,
after receivin9 it, continues processing.
Nonconversational Action
User: N/A
system: Task is abnormally termiRated.
Reference Data (Also see Appendix B-1'.)
Requirement determined by: CZAFV
Variable data supplied by: CZAFV
0310 integer Il'fVALm PAD.. REElI1'1'ER.
Explanation: Value entered for PAD is iD1lalid.
Results from inaccurate E'e8poase to lIeS.age
A086.
F Iter Code: WSA
COD'f'ers
Dnal Action
0Ber: Speci ied
text of .assage.
System: waits for user's response and,
after receiviag it, continues processing.
Nonconversation!l Action
USer: tVA
systma: Task is abDo:£lUll.y terIIinated.
Reference Data (Alao eee AppeDdiz B-1 •• )
Requirement dete"nined by. CSAFY
Variable data supplied by. ClArY
0371 RECORD FORMAT CARIlO'l' CtaBGB. FORMAT OF OLD OS
USED.
EXplanatiollf A conflict: exists i . ~eQOEd
fOrJlats 4escrlbed in mu'S ~or old aD4 copy
4ata sets.
(Wrror was ia definition.)
Filter code: 1ISA
Conversational Action
User: tVA
system: Processing continues.
NOnconversational Action
User: N/A
System: Processing continues.
Refefence Data (Also see Appendix B-l_.)
General Messages
437
Page of GC28-2037-7. Issued sept. 30, 1972 by TNL GN28-3220
Requirement determined by:
Variable data supplied by:
CZAFV
N/A
D372 RECORD LENGTH CANNOT BE CHANGED.
LENGTH OF OLD DS USED.
0316 MEMBER name ALREADY EXISTS IN DIRECTORY OF
DS. CANNOT RECORD MEMBER NAME.
RECORD
Explanation: Conflict exists in record lengths
described in DDEFs for old and copy data
sets.
{Error was in definition.}
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAFV
Variable data supplied by:
N/A
0373 BLOCK SIZE CANNOT BE CHANGED .BLOCK SIZE OF
Explanation: The rrember name specified for the
copy data set already appears as a member of
the partitioned data set: no copy will be
made.
Filter Code: WSA
Conversational Action
User:
N/A
System:
N/A
Nonconversational Action
User:
N/A
System: Command canceled; next command read
from SYSIN.
Reference Data (Also see Appendix B-lq.)
Requirement determined by: CZAFV
Variable data supplied by: CZAFV
D380 DATE date INVALID •. REENTER DATE IN MM/DD/YY
FORMAT.
OLD DS USED.
Explanation: The DDEF for copy data set
indicates a block size different from that
defined for the old data set.
Filter Code: WSA
Conversational Action
User: N/A
System:
Processing continues.
Nonconversational Action
User: N/A
system: Processing continues.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAFV
Variable data supplied by: N/A
0374 CANNOT RENUMBER NEW DS. NOT A LINE DS.
Explanation: Renumbering was requested, but
the old data set was not a line data set; or
the new data set organization is VSAM or
BSAM.
Filter Code: WSA
Conversational Action
User: N/A
System: Copy is made without renumbering.
Nonconversational Action
User: N/A
System: Copy is made without renumbering.
Reference Data {Also see Appendix B-14.}
Requirement determined by: CZAFV
Variable data supplied by: N/A
Explanation: Value entered for date was not in
correct fonl1at.
Filter Code: WSA
Conversational Action
User: Specified in text of message.
System: Waits for user's respcnse and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZACB
Variable data supplied by: CZACB
D381 TIME time INVALID. REENTER TIME IN HH.MM.SS
FORMAT.
Explanation: Value entered for time was not in
correct format.
Filter Code: WSA
Conversational Action
User: Specified in text of message.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZACB
Variable data supplied by: CZACB
D382 CANCELLED: SYSTEM
D375 MEl>lBER name ALREADY EXISTS IN DIRECTORY OF
DS. REENTER MEMBER NAME.
Explanation: The member name specified for the
copy data set already appears as a member of
the partitioned data set.
Filter Code: WSA
Conversational Action
User: Specified in text of message.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAFV
Variable data supplied by: CZAFV
438
FAUL~.
Explanation: Either a problem was encountered
in renaming a SAM DSCB or a GETMAIN could
not be performed for extra volume field.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: Command ignored.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEI
variable data supplied by: N/A
Page of GC28-2037-7, Issued Sept. 30, 1972 by TNL GN28-3220
D383 LINE BAS NO
CON~EN~S.
REENTER.
Explanation: A line number was entered, but no
text followed i t when an insert or
replacement was indicated.
Filter Code: WSA
Conversational Action
User: Specified in text of message .•
System: waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User:
Ii/A
system: processing continues; last-entered
line is ignored.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEG
Variable data supplied by:
N/A
General Messages
438.1
D384 DATE CONTAINS MORE THAN 8 CHARACTERS. REENTER
DATE IN MWDD/YY FORMAT.
Explanation: Value entered for date was more
than 8 characters in length.
Filter Code: WSA
Conversational Action
User: Specified in text of message.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZACB
Variable data supplied by: N/A
D385 TIME CONTAINS MORE THAN 8 CHARACTERS. REENTER
TIME IN HH.MM.SS FORMAT.
Explanation: Value entered for time was more
than 8 characters in length.
Filter Code: WSA
Conversational Action
User: Specified in text of message.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZACB
Variable data supplied by: N/A
D386 DATA SET RECORD HAS NO DDEF VERB--RESPOND
Explanation: In trying to execute an allegedly
prestored DDEF command, the system has found
an invalid or missing verb (operation
field) •
Filter Code: XSA
Conversational Action
User: Enters Y (skip record) or N (cancel).
System: Waits for user's r~sponse and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAFS
Variable data supplied by: N/A
D387 PRECEDING RECORD CANCELLED:
CDD?
CONTINUE WITH
Explanation: The DDEF command eQuId not be
executed due to some error in that command.
The user is now given the option of
continuing (to execute remaining DDEFs) or
of terminating the command. The erroneous
record is printed out so that the user can,
if he wishes. subsequently make a correction
to it.
Filter Code: XSA
Conversational Action
User: Enters Y (continue) or N (cancel).
System: waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by:
Variable data supplied by:
CZAFS
N/A
D393 DATA SET dsname PARTITIONED BUT NO MEMBER IS
SPECIFIED. REENTER DSNAME WITH MEMBER.
Explanation: The name of the data set to be
copied is the name of a partitioned data
set. A partitioned data set cannot be
copied.
Filter Code: WSA
Conversational Action
User: Specified in text of message.
system: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAFV
Variable data supplied by: CZAFV
D396 CANCELLED: USERID userid HAS NO ACTIVE TASK
Explanation: The specified user has no active
task.
Filter Code: WSA
Conversational Action
User: Specified in text.
System: Routine returns to Director.
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZACG
Variable data supplied by: CZACG
D397 THE FOLLOWING DDNAMES WERE NOT PROCESSED
Explanation: The system lists the DDEF
commands that were not executed because of
errors in them (such as no command verb), or'
because a data definition name was not
associated with a DDEF command, yet the user
had indicated that the CDD command was to
continue regardless of the errors.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues with next
command.
Nonconversational Action
User: N/A
System: N/A (The task would have been
terminated when an erroneous DDEF was
detected).
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAFS
Variable data supplied by: CZAFS
D401 INVALID name COMMAND IGNORED
Explanation: An invalid return codt was given
by NEXTPAR.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
439
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZACF
Variable data supplied by: CZACF
D451 PROCEEDING: BULKIO PENDING.
DSNAME data set name
IGNORING
EXplanation: A task is waiting to use the data
set. Cannot erase data set until task is
completed.
Filter Code: WSA
Conversational Action
User: N/A
System: Continues processing.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEJ
Variable data supplied by: CZAEJ
D453 YOU HAVE NOT JOINED THIS USER, SO CANNOT
ACCESS HIS DATA SET dsname. COMMAND IGNORED.
Explanation: Administrator has asked for
status of a data set belonging to a user not
under his administration.
Filter Code: WSA
Conversational Action
User: Specified in text of message.
System: Waits for the entry of the next
command and, after receiving it,
continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEL
Variable data supplied by: CZAEL
D454 CANCELLED: USER HIT ATTENTION.
Explanation: The user hit the Attention key,
canceling the command.
Filter Code: WSA
Conversational Action
User: Specified in text of message.
System: Waits for the entry of the next
command and, after receiving it,
continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEJ
Variable data supplied by: N/A
D458 YOU MAY NOT CANCEL BSN integer
Explanation: The only batch job that a user
may cancel is one that he starts.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-14.>
Requirement determined by: CZAEJ
Variable data supplied by: CZAEJ
440
D459 UNRECOVERABLE PRINT ERROR. TASK TERMINATED.
Explanation: An unrecoverable printer error
has been encountered; the PRINT task is
terminated.
Filter Code: WSA
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: Task terminated by LOGOFF.
Reference Data (Also see Appendix B-14.)
Requiremeni: determined by: C ZABG
Variable data supplied by: N/A
D460 SELECT OPTION NOT 1,2,3, OR EDIT. REENTER OR
DEFAULT
Explanation: The stacker select option for the
PUNCH command must be 1, 2, 3, EDIT or
defaulted (2).
Filter Code: WSA
Conversational Action
Userl
Specified in text of message.
System:· Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User:
N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZABD
Variable data supplied by: N/A
D466 RENUMBERING NOT SPECIFIED BUT INCREMENT WAS
GIVEN. ENTER OR DEFAULT START LINE NO.
Explanation: User entered entire CDS command,
defaulting start line number but giving
increment.
Filter Code: WSA
Conversational Action
User: Specified in text of message.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAFV
Variable data supplied by: N/A
D467 CANCELLED: DEVICE UNAVAILABLE
Explanation: User specified a device that is
not available to the time-sharing system.
Filter Code: WSA
Conversational Action
User: Specified in text of message.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEN
Variable data supplied by: N/A
D470 CANCELLED: NO SPACE AVAILABLE
Explanation: Virtual storage required for
MODIFY processing is not currently
available.
Filter code: WSA
Conversational Action
User: N/A
System: Processing continues with next
command.
Nonconversational Action
User: N/A
System: Processing continues with next
command on SYSIN.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEG
Variable data supplied by: N/A
D472 CANCELLED: RKP,KEYLEN AND LRECL INCONSISTENT
Explanation: system has detected in90nsistency
or conflict among values entered for key
position, key length, and logical record
l.ength.
Filter Code: WSA
Conversational. Action
User: N/A
System: Processing continues with next
command.
Nonconversational Action
User: N/A
System: processing continues with next
command.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEG
Variable data supplied by: N/A
D473 CANCELLED: LINE NUMBER number INVALID
Explanation: An invalid line number was
entered.
Filter Code: WSA
Conversational Action
User: None; he may reenter line, if
desired.
System: Processing continues with next user
entry for MODIFY.
Nonconversational Action
User: N/A
System: Processing continues with next
line.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEG
Variable data supplied by: CZAEG
D474 CANCELLED: UNABLE TO DDEF NOW.
Explanation: Either the requested volume was
not mounted, or no space was available to
build a JFCB.
Filter Code: WSA
Conversational Action
User: None: user may, if he wishes, attempt
to define data set with a DDEF command.
System: Processing continues with next
command.
Nonconversational Action
User: N/A
System: Processing continues with next
command.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZADF or CZAEG
Variable data supplied by: N/A
D475 CANCELLED: DSNAME NOT UNIQUE.
Explanation: The leftmost part of the name
entered was already in the catalog.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: Command canceled.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEI
Variable data supplied by: N/A
D477 CANCELLED:
DSORG
dsname ALREADY DEFINED WITH code
Explanation: 11 nonunique data set name has
been entered.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User:
N/A
System: Processing continues for next
command. Current command canceled.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZADF
Variable data supplied by: CZADF
D479 UNDERSIZE RECORD IGNORED.
Explanation: Last-entered line (record) has
less than the minimum number of characters
necessary (RKP + KEYLEN).
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues with next user
entry.
Nonconversational Action
User: N/A
System: Processing continues with next
line.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEG
Variable data supplied by: N/A
D480 INPUT PARAMETERS LRECL, RKP, KEYLEN, RECFM DO
NOT MATCH DATA SET. COMMAND CANCELLED.
Explanation: Input parameters LRECL, RKP,
KEYLEN, or RECFM are not consistent with
those in the data control block.
Filter Code: WSA
Conversational Action
User: N/A
System: Awai ts next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEG
Variable data supplied by: N/A
D484 CANCELLED: VOLUME IN USE
Explanation: The requested volume is presently
being used.
441
Filter Code: WSA
Conversational Action
User: Specified in text of message.
system: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEN
Variable data supplied by:
N/A
D485 NO DEVICE SECURED FOR THIS REQUEST.
Explanation: A SECURE command was not
previously issued for the specified device.
Filter Code:
WSA
Conversational Action
User:
Specified in text of message.
system: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEN
Variable data supplied by:
N/A
D486 UNCORRECTABLE I/O ERROR ON VAM DATA SET. TASK
TERMINATED.
Explanation: An unrecoverable I/O error was
encountered while trying to read input;
PRINT, PUNCH, RT, OR WT task is terminated.
Filter Code: WSA
Conversational Action
User:
N/A
System:
N/A
Nonconversational Action
User:
N/A
System:
Task terminated by LOGOFF.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZABF, CZABG,
CZABH, or CZABI
Variable data supplied by: N/A
D481 UNCORRECTABLE PUNCH ERROR. TASK TERMINATED.
Explanation: An unrecoverable error has
occurred, so that the PUNCH task is
terminated.
Filter Code: WSA
Conversational Action
User:
N/A
System:
N/A
Nonconversational Action
User: N/A
System: Task terminated by LOGOFF.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZABI
Variable data supplied by:
N/A
D488 UNCORRECTABLE WRITE TAPE ERROR. TASK
TERMINATED.
Explanation: An unrecoverable error has
occurred; the WT task is terminated.
Filter Code: WSA
Conversational Action
User:
N/A
System: N/A
442
Nonconversational Action
User: N/A
System: Task terminated by LOGOFF.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZABI
Variable data supplied by:
N/A
D489 CANCELLED: UNREADABLE LABEL ON VOLUME volume
Explanation: The volume label cannot be read.
Filter code: WSA
Conversational Action
User:
Specified in text of message.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by:
CZAEN
Variable data supplied by: CZAEN
D490 operand NOT E OR DEFAULT:
REENTER.
Explanation: User has been prompted for ERASE
options and has entered an invalid response,
or operand given for ERASE is invalid.
Filter Code: WSA
Conversational Action
User: Specified in text of message.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System:
Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by:
CZAFV
Variable data supplied by: CZAFV
D491 USER NOT UNDER YOUR AUTHORITY.
USERID.
REENTER
Explanation: The user ID entered does not
belong to a user under the authority of that
administrator.
Filter Code: WSA
Conversational Action
User: Specified in text of message.
Syst~~:
Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User:
N/A
system:
Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAFL
Variable data supplied by:
N/A
D493 INVALID CHARACTER IN HEXADECIMAL STRING. LINE
IGNORED.
Explanation: A non-hexadecimal character was
entered.
Filter Code: WSA
Conversational Action
User:
N/A
System: Processing continues.
Nonconversational Action
User:
N/A
System:
N/A
Reference Data (Also see Appendix B-14.)
Requirement determined by:
Variable data supplied by:
CZAEG
N/A
D494 ODD NUMBER OF DIGITS IN HEXADECIMAL
STRING. LINE IGNORED.
Explanation: An incorrect number of digits was
entered.
Conversational Action
User:
N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEG
Variable data supplied by: N/A
D495 CANCELLED: PARAMETER TOO LONG.
Explanation: The user has entered a parameter
which is longer than that which the system
will accept for that particular value.
Filter Code: WSA
Conversational Action
User:
N/A
System: Processing continues.
Nonconversational Action
User:
N/A
System: Processing continues.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEL
Variable data supplied by: N/A
D496 KEYWORD INVALID. REENTER USERID= OPERAND.
Explanation: An incorrect keyword value for
the USERID parameter has been entered.
Filter Code: WSA
Conversational Action
User: Specified in text of message.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Reqvirement determined by: CZAEL
Variable data supplied by: N/A
D497 NO FURTHER STATUS AVAILABLE FOR THIS DS
BECAUSE reason.
Explanation: Due to the indicated reason,
further status cannot be provided.
Filter Code: WSA
Conversational Action
User: Specified in text of message.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User:
N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEL
Variable data supplied by: CZAEL
D498 dsname NOT IN CATALOG-REENTER
Explanation: The data set is not in the
catalog at this time.
Filter Code: XSA
Conversational Action
User: Specified in text of message.
System: Waits for user's response and,
after receiving it, continuesprocessing.
Nonconversational Action
User:
N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEL
Variable data supplied by: CZAEL
D499 YOU ARE NOT PERMITTED TO SEE STATUS OF THIS
DATA SET-REENTER DSNAME
Explanation: User has asked for status of a
data set which he is not authorized to see.
Filter Code: XSA
Conversational Action
User:
Specified in text of message.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User:
N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by:
CZAEL
Variable data supplied by: CZAEL
D500 userid NOT JOINED-REENTER ANOTHER USERID OR
DEFAULT
Explanation: The user ID mentioned is not
joined. You may default to get your own
status.
Filter Code: XSA
Conversational Action
User:
Specified in text of message.
System: Waits for user's response and,
after receiving it, continues processing.
Nonoonversational Action
'
User:
N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEL
Variable data supplied by: CZAEL
D501 CANCELLED: BULKIO OPERATION PENDING.
Explanation: A data set cannot be cataloged if
bulk I/O operations are pending for it.
Filter Code: WSA
Conversational Action
User:
N/A
System: Processing continues.
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEL
Variable data supplied by:
N/A
D502 CANCELLED: NO LINE integer
Explanation: The line number specified cannot
be found.
Filter Code: WSA
Conversational Action
User: Enters next line number.
443
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEG
Variable data supplied by: CZAEG
DS04 CANNOT RENAME WITH YOUR DSNAME2.
Explanation: The DSNAME2 (new data set name)
option specified was invalid.
Filter Code: WSA
Conversational Action
User: Try another new data set name.
System: Waits for user's response and,
after receiving it, continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Afpendix B-14.)
Requirement determined by: CZAEI
Variable data supplied by: N/A
DSOS CANCELLED:
DATASET IN USE
Explanation: The data set is open and in use
by either the user's module or by some other
module. The data set must ~e closed before
it can be renamed.
Filter Code: WSA
Conversational Action
User: Close the data set and retry the
command.
System: Command cancelled
Nonconversational Action
User: N/A
System: Command ignored
Reference Data (Also see Afpendix B-14.)
Requirement determined by: CZAEI
Variable data supplied by: N/A
Explanation: A CATALOG command was issued but
the data set has already been cataloged.
Filter Code: WSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEI
Variable data supplied by: N/A
DS08 CANCELLED: data set name VAM-NOT CATALOGED.
Explanation: A VAM data set must be cataloged.
The CATALOG command cannot be used to
catalog a VAM data set.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEI
Variable data supplied by: CZAEI
Message residence: SYSMLF
Message issued by: CZAEI
DS09 ACC OPERAND IGNORED FOR VAM DATA SETS - TRY
RET COMMAND
Explanation: The CATALOG command ignores the
ACC parameter for all VAM data sets.
Filter Code: ISA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEI
Variable data supplied by: N/A
DS06 LRECL OF INPUT DCB=O. JOB TERMINATED.
Explanation: Logical record length of user's
data set was found to be zero after opening
a DCB. BULKIO operations on a private
volume PRINT, or on a private volume PUNCH,
RT, or WT, do not support this condition.
Filter Code: WSA
Conversational Action
User: DDEF the data set with LRECL DCB
subparameter specified, with a nonzero
value. Then issue PRINT, PUNCH, RT, or
WT request again.
System: N/A
Nonconversational Action
User: N/A
System: The task issuing this message is
terminated before any user records are
processed.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZABF, CZABG,
CZABH, CZABI
Variable data supplied by: N/A
DSI0 PROCEEDING: data set name IN USE
Explanation: The data set is in use by another
task.
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data
Requirement determined by: CZAEJ
Variable data supplied by: CZAEJ
Message residence: SYSMLF
Message issued by: MSGWR
Destination
Conversational: SYSOUT
Nonconversational: SYSOUT
Transmittal technique: MSGWR
D511 CANCELLED: data set name INVALID
DS07 CANCELLED:
CATALOGED
444
THIS DATA SET IS ALREADY
Explanation: The data set name specified is
not a standard TSS/360 data set name.
Conversational Action
User: N/A
System: Continues processing.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data
Requirement determined by: CZAEJ
Variable data supplied by: CZAEJ
Message residence: SYSMLF
Message issued by: MSGWR
Destination
Conversational: SYSOUT
Nonconversational: SYSOUT
Transmittal technique: J!lJSGWR
D512 CANCELLED: data set name UNRNOWN.
Explanation: The user entered a data set name
which was not found in his catalog.
Filter Code: ISA
Conversational Action
User: N/A
System: Command canceled; processing
continues.
Nonconversational Action
User: N/A
System: Awaits next command.
Reference Data
Requirement determined by: CZAEJ
Variable data supplied by: CZAEJ
Message residence: SYSMLF
Messabe issued by: MSGWR
Destination
Conversational: SYSOUT
Nonconversational: SYSOUT
Transmittal technique: MSGWR
D513 CANCELLED:
MEMBERS
DELETE CANNOT BE ISSUED FOR
Explanation: A member of a VPAM (virtual
partitioned) data set cannot be deleted.
Filter Code: WSA
Conversational Action
USer: N/A
System: Terminates command processing.
Nonconversational Action
User: N/A
System: Terminates command processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEJ
Variable data supplied by: N/A
D514 CANCELLED:
THIS DATA SET
data set name INVALID OR NOT IN
Explanation: A VPAM (virtual partitioned) data
set member specified in the ERASE command
has been found to be invalid. Either the
name is in USe (return code of X'04' from
CZCOJ1) or the member is not in the
partitioned organization directory (return
code of X'OS' from CZCOK1).
Filter Code: WSA
Conversational Action
User: N/A
System: Terminates command processing.
Nonconversational Action
User: N/A
System: Terminates command processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by:
Variable data supplied by:
CZAEJ
CZCOJl or CZCOKl
D515 CANCELLED: MEMBER SPECIFIED BY PARTIALLY
QUALIFIED DSNAME
Explanation: The user must supply a
fully-qualified data set name to erase a
member of a VPAM (virtual partitioned) data
set.
Filter Code: WSA
Conversational Action
User: Specifies fully-qualified dsname
System: Terminates command processing
Nonconversational Action
User:
N/A
System: Terminates command processing.
Reference Data (Also see Appendix B-14.>
Requirement determined by: CZAFJ
Variable data supplied by: CZCFL2
D516 CANCELLED:
CATALOG.
data set name NOT IN YOUR
Explanation: The user entered a data set name
which was not in his catalog.
Filter Code: WSA
Conversational Action
User: N/A
System: Command canceled; processing
continues.
Nonconversational Action
User: N/A
System: Awaits next command.
Reference Data
Requirement determined by: CZAEJ
Variable data supplied by: CZAEJ
Message residence: SYSMLF
Messabe issued by: MSGWR
Destination
Conversational: SYSOUT
Nonconversational: SYSOUT
Transmittal technique: MSGWR
D517 CANCELLED: name LOADED.
Explanation: The user's data set, named in the
message text, cannot be unloaded due to
outstanding references. Therefore it cannot
be deleted.
Filter Code: WSA
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZABD
Variable data supplied by: CZABD
D518 CANCELLED: name LOADED.
Explanation: The data set named in the message
text cannot be unloaded due to outstanding
references. Loaded data sets cannot be
erased.
Filter Code: WSA
Conversational Action
User: N/A
System: Continues processing.
445
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZABD
Variable data supplied by: CZABD
D519 CANCELLED: data set name CATALOGED, BUT NOT
IN STORAGE
EXplanation: The data set control block for
the data set is not in the location pointed
to by the system catalog. Full details are
in the operator's log (SYSLOG).
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZCOA
Variable data supplied by: CZCOA
D521 TERMINATED: PROMPT ISSUED IN
NONCONVERSATIONAL MODE
Explanation: CATALOG command processor tried
to prompt when nonconversational task was
running.
Filter Code: WSB
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZAEI
Variable data supplied by: N/A
D522 PROCEEDING:
NO INVALID CHARACTERS FOUND
Explanation: Character scan has revealed no
incorrect values.
Filter Code: WSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZABG
Variable data supplied by: N/A
D523 TERMINATED:
Explanation: To print an ASCII tape, the
record format in the DCB subparametex of the
ta pe 's DDEF must be ·U".
Filter Code: XSA
Conversational Action
User: N/A
System: Awai ts next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZABG
Variable data supplied by: N/A
line E
.** ( NOT
FOUND WHERE REQUIRED
1. Explanation: The name of the called subroutine
in a CALL statement is followed by a
non-blank character other than a left
parenthesis.
line -- seven-digit line number of source
statement in question.
System Default Action:
Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CERAI
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
2. Explanation: In an assigned GO TO statement,
the variable and comma are not followed by a
left parenthesis.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix E-15.)
Requirement determined by: CEKAQ
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
3. Explanation: The keyword IF is not followed by
a left parenthesis.
line -- seVen-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CERAR
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
BSAM CONVERSION ERROR
Explanation: An invalid return code was
received from CZCWA1.
Filter Code: TSA
Conversational Action
User: N/A
System: Terminates processing.
Nonconversational Action
User: N/A
System: Terminates processing.
Reference Data (Also see Appendix B-14.)
Requirement determined by: CZABG
Variable data supplied cy: N/A
446
D524 TERMINATED: RECORD FORMAT NOT U FOR ASCII
OPTION
4. Explanation: A name in a DIMENSION statement
is not followed by parenthesized dimension
infonnation.
11ne -- seven-digit line number of source
statement in question.
Systerr, Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAU
variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
5. Explanation: A left parenthesis does not
appear at the beginning of a group of names
in an EQUIVALENCE statement.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAY
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
'6. Explanation: The keyword WRITE is not followed
by a left parenthesis.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBE
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
7. Explanation: A left parenthesis does not
follow the keyword FORMAT.
line -- seven-digit line number of source
statement in question.
system Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBF
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
8. Explanation: Type or length specification in
an IMPLICIT statement is not followed by a
left parenthesis.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see AFpendix B-15.)
Requirement determined by: CEKBN
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
9. Explanation: A non-blank character other than
a left parenthesis follows the entry point
name in a SUBROUTINE, FUNCTION, or ENTRY
statement.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by, CEKES
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E*** (OR NAME OR STATEMENT NUMBER NOT FOUND
WHERE REQUIRED)
Explanation: The keyword READ is not followed
by either a left parenthesis, or a constant
or variable FORMAT specification.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBE
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E *** ) MISSING IN COMPLEX CONSTANT
Explanation: The imaginary part of a complex
constant is not followed by a right
parenthesis.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAE
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E *** ) MISSING IN DIMENSION DECLARATION
Explanation: The list of dimensions in a
dimension declaration is not closed with a
right parenthesis.
line -- seven-digit line number of source
statement in question.
Systerr, Default Action: Ignore the statement
and continues.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAF
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E*** ) NOT FOUND WHERE REQUIRED
Explanation: In a WRITE statement, the FORMAT
specification is not followed by a right
parenthesis.
In a READ statement, the last END or ERR
return specification is not followed by a
right parenthesis.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBE
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E *** - OR , OR ) NOT FOUND WHERE REQUIRED
Explanation: A letter whose type is being
specified in an IMPLICIT statement is not
followed by a legal delimiter.
447
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continues.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBN
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
system Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKCL
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E *** , NOT FOUND WHERE REQUIRED
line E *** / NOT FOUND WHERE REQUIRED
1. Explanation: A list of initial values in a
DATA statement is not terminated with a
slash.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAH
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
2. Explanation: A slash does not follow a block
name in a COMMON statement.
line
seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAV
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
3. Explanation: A slash does not follow the
keyword NAMELIST, or does not follow a
Namelist name.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBH
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
4. Explanation: In a SUBROUTINE, FUNCTION, or
ENTRY statement. a formal argument name in
the argument list is preceded but not
followed by a slash.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBS
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
5. Explanation: A group of initial values in a
type or DATA statement is not terminated by
slash.
line -- seven-digit line number of source
statement in question.
448
1. Explanation: A name in an EXTERNAL statement
is followed by a non-blank character other
than a comma.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAM
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
2. Explanation: The real part of a complex
constant is not followed by a comma.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAE
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
3. Explanation: In an aSSigned GO TO statement,
the variable is not followed by a comma. In
a computed GO TO statement, the
parenthesized statement number list is not
followed by a comma.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAQ
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
4. Explanation: The first or second statement
number in an Arithmetic IF is not followed
by a comma.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAR
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
5. Explanation: A non-blank character other than
a corr~a follows initial values enclosed in
slashes in a TYPE statement.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see A~pendix B-15.)
Requirement determined by: CERAS
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTB
6. Explanation: A non-blank character other than
a comma follows a name and its dimensions in
a DIMENSION statement.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAU
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by:
CEKTB
7. Explantion: A group-closing right parenthesis
in an EQUIVALENCE statement is followed by a
character other than a comma.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.>
Requirement determined by: CEKAY
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
8. Explanation: A comma does not follow the lower
limit in a DO statement or 1/0 loop.
line -- seven-digit line number of source
statement in question.
System Default Action:
Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Re'quirement determined by: CEKBA
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
9. Explanation: In a PRINT, PUNCH, or READ
without unit statement, the FORMAT
specification is not followed by a comma.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBE
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
lO.Explanation: In a DATA statement, a list of
initial values enclosed in slashes is
followed by a non-blank character other than
a comma.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBM
Variable data supplied by: N/A
Message residence:
MeSsage issued by:
CEKCA
CEKTH
11. Explanation: In an IMPLICIT statement, a right
parenthesis is followed by a non-blank
character other than a comma.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBN
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
12. Explanation: An I/O list element or
parenthesized sublist is followed by a
non-blank character other than a comma.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBW
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E . . . • OR ) NOT FOUND WHERE REQUIRED
1. Explanation: In an EQUIVALENCE statement, a
simple or subscripted variable name is net
followed by either a comma or a right
parenthesis.
line -- seven-digit line number of sourc~
statement in question.
System Default Action:
Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAY
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
2. Explanation: In a WRITE statement, the data
set reference number specification is not
followed by either a comma or a left
parenthesis. In a READ statement, some one
of the data set reference number
specification, the FORMAT speCification, or
the END or ERR return specification, is not
followed by either a comrr~ or a left
parenthesis.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by:
CEKBE
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
3. Explanation: In a SUBROUTINE, FUNCTION, or
ENTRY statement, a formal argument
specification in the argument list is not
followed by a comma or a right parenthesis.
449
line -- seven-digit line number of source
statement in question.
system Default Action: Ignore the statement
and continue.
Reference Data (Also see A~pendix B-15.)
Requirement determined by: CEKBS
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
4. Explanation: A statement number in an assigned
or computed GO TO statement is not followed
by a comma or a right parenthesis.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKCC
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E *** , OR / NOT FOUND WHERE REQUIRED
1. Explanation: In a TYPE statement, an initial
value constant, a name, or a naThe with
dimension information is followed by a
non-blank character other than a comma or a
slash.
line -- seven-digit line number of source
statement in question.
System Default Action:
Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAH or CEKAS
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
2. Explanation: In a COMMON statement, a variable
name or a variable with dimension
specification is followed by a non-blank
character other than a comma or a slash.
line -- seven-digit line number of source
statement in question.
System Default Action:
Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAV
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
3. Explanation: A list element in a NAME-LIST
statement is followed by a non-blank
character other than comma or slash.
line -- seven-digit line number of source
statement in question.
System Default Action:
Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBB
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
4. Explanation: A name in a DATA statement list
is not followed by a cowma or a slash.
450
line -- seven-digit line number of source
statement in question.
Systerr, Default Action: Ignore the statement
and continue.
Reference Data (Also see Ap~endix B-15.)
Requirement determined by: CEKBM
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E *** 'END' NOT FOUND WHERE REQUIRED
Explanation: In a READ statement with a
correct ERR alternate return specification,
the keyword in the second alternate return
specification is not END.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBE
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E *** 'END' OR 'ERR' NOT FOUND WHERE REQUIRED
Explanation: In a READ statement, the keyword
in the first alternate return specification
is neither END nor ERR.
line -- seven-digit line number of source
statement in question.
SystelT. Default Action:
Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBE
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E *** 'ERR' NOT FOUND WHERE REQUIRED
Explanation: In a READ statement with a
correct END alternate return specification,
the keyword for the second alternate return
specification is not ERR.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data '(Also see Appendix B-15.)
Requirement determined by: CEKBE
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E *** 'START' NOT FIRST CONTROL SECTION
STATEMENT. TREATED AS COMMENTS.
Explanation:
See message text.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be made commentary. Assen~ly will
continue with next statement.
Reference Data (Also see Appendix B-15.)
Requirement determined by:
Variable data supplied by:
Message residence: CEVDX
Message issued by: CEVDX
line E ***
=
CEVCT
N/A
NOT FOUND WHERE REQUIRED
Explanation: An = does not follow either the
keyword ERR or END in a READ statement or
the controlled variable in a DO statement.
will be set for subsequent processing.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCS
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
*..
line E
ASSEMBLER WORKING STORAGE
EXHAUSTED--WORK1
~anation:
line -- seven-digit line number of source
statement in question.
System Default Action:
Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBA or CEKCE
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E *** ABSOLUTE VALUE OF DISPLACEMENT TOO
LARGE
Explanation: An expression in the operand
field of a machine instruction, after having
been reduced to a base register and
displacement, has a displacement whose
absolute value is greater than 4096.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled with binary text
development limited by errors in operand
field.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVUV
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line E *** expression ABSOLUTE VALUE OF
DISPLACEMENT TOO LARGE
Explanation: The absolute displacement value
of an S-type adcon was greater than 4095.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled with the text of the
S-type adcon in error set to zero.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVAD
Variable data supplied by: CEVAD
Message residence:
CEVDX
Message issued by: CEVDX
line E **. ALL PRECISION LOST DURING SCALING
Explanation: There are no significant bits
present after a floating point value has
been formatted. This condition is due to a
large scaling factor and/or a number of
small magnitude.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled, but an error indicator
Insufficient working storage is
available for the assembler's requirement
for working segment 1.
line -- seven-digit line number of source
statement in question.
System Default Action: Abnormal termination of
assembly.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVST, CEVPM,
CEVPC, or CEVPD
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by:
CEVDX
line .E ••• ASSEMBLER WORKING S'IORAGE
EXHAUSTED--WORK2
Explanation: Insufficient working storage is
available for the assembler's requirement
for working segment 2.
line -- seven-digit line number of source
statement in question.
System Default Action: Abnormal termination of
assembly.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVST, CEVPM,
CEVPC, or CEVPD
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
*..
line E
ATTEMPTED EXPLICIT REGISTER
SPECIFICATION
Explanation: This message is given when the D
and associated B-field of an operand are
both absolute and the D-field is greater
than 4095 thus causing a possible
conflicting specification of the B-field.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled with explicit B-field
specification ignored.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVMO
variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
.*.
line E
SECTION.
ATTEMPTED ORIGIN OUTSIDE OF CONTROL
NOT USED.
Explanation:
(1) unpaired relocatable symbol
was defined in another control section from
that in which the ORG statement appears, or,
(2) negative absolute expression appearted
in the ORG statement operand field, or (3)
451
an ORG was attempted to a point below the
initial location of the control sections
containing the ORG statement.
Message residence:
Message issued by:
CEVDX
CEVDX
line E . . . BLANK STATEMENT AFTER LOGICAL IF
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be ignored. Assembly will continue
with next statement.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVGN
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line E . . . ATTEMPTED STORE INTO LITERAL
1. Explanation: The data address specified a
literal and the command code was a forward
or backward read.
line -- seven-digit line number of source
statement in question.
System Default Action: The data address field
will be zero in the generated CCW.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCC
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
2. Explanation: The first operand of the
associated instruction specifies a literal.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled with the D field in error
set to zero.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVMO
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVCX
3. Explanation: Message is produced if the first
operand of a store type instruction contains
a literal.
line -- seven-digit line number of source
statement in question.
System Default A.ction: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVMP
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVCX
line E
***
ATTRIBUTE UNAVAILABLE OUTSIDE MACROS
Explanation: A variable symbol occurs at the
user level.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled, but an error indicator
will be set for subsequent processing.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVEV
Variable data supplied by: N/A
452
Explanation: No consequent statement is given
following a Logical IF.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBR
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E . . . BLOCK DATA STATEMENT AFTER LOGICAL IF
Explanation: A BLOCK DATA statement appears as
the consequent of a Logical IF.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBI
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line
E...
name CANNOT BE FOUND ON COPY LIBRARY
Explanation: The name specified in the operand
of a COPY statement cannot be found in the
library index. Variable portion will
contain the name.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be made commentary. Assembly will
continue with the next stateRent.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCY
Variable data supplied by: CEVCY
Message residence: CEVDX
Message issued by: CEVDX
line E ••• CHARACTER STRING ACCUMULATION IN EXCESS
OF 255
1. Explanation: Either the macro instruction or
associated prototype statement has been
scanned for comma or blank delimiters
terminating operands. IBM System/360 Time
Sharing System: Assembler Language,
GC28-2000, for syntax rules, especially
those concerning paired apostrophes and
paired parentheses. continuation columns
should also be checked since multiple line
or card input is a prerequisite tor this
message.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated macro
instruction will be assembled with
truncation of the operand in error to 255
characters.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVPM
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
2. EXplanation: Message is produced if the length
of a string to be substituted exceeds 255.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see A~pendix B-iS.)
Requirement determined by: CEVSS
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line E *** string CHARACTER STRING .EXCEEDS 8
CHARACTERS
Explanation: Message is produced if the
character string in the operand of a SETC
instruction exceeds 8. Variable portion
will be blank.
line
seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see A~pendix B-15.)
Requirement determined by: CEVSE
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
line E .** CHARACTER STRING TOO LONG.
Explanation: A string of more than 255 numeric
or alphanumeric characters has appeared.
line -- seven-digit line nUHher of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see A~pendix B-iS.)
Requirement determined by: CEKAE
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTB
line E
*..
COMMON STATEMENT AFTER LOGICAL IF
Explanation: A COMMON statement appears as the
consequent of a logical IF.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAV
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E *.* 'symbol CONFLICTING USAGE PROTOTYPE
AND/OR MACRO INSTRUCTION OPERANDS.
Explanation: Two or more positional
operands are identical.
~rototype
line -- seven-digit line number of source
statement in question.
systero Default Action: First of multiply names
positional prototype operands was accepted
together with its associated macro
instruction positional operand~ all others
were ignored.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVPM
Variable data supplied by: CEVPM
Message residence: CEVDX
Message issued by: CEVDX
line E
***
CONSTANT NOT FOUND WHERE REQUIRED.
Explanation: In a type or DATA statement, an
initial slash, a comma, or an asterisk is
not followed by a constant.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-iS.)
Requirement determined by: CEKCL
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E •• * CONSTANT SHOULD BE INTEGER *4 FOR THIS
USAGE, BUT IS type*n
Explanation: The constant specified in a READ,
WRITE, PAUSE, STOP, RETURN, BACKSPACE,
REQIND, or END FILE statement to designate
the data set being referenced, or as a loop
limit or step in a DO or I/O statement, is
not type INTEGER *4 type *n - LOGICAL.4;
REAL*4~ REAL * 8; COMPLEX*8; COMPLEX*16; or
ALPHAMERIC.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBD, CEKBE,
CEKBG, or CEKCJ
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
line E *** type*n CONSTANT OUT OF RANGE
Explanation: An alphanumeric constant with
more than 255 characters has appeared.
type*n - ALPHAMERIC.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-iS.)
Requirement determined by: CEKAE
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
453
line E *** CONTROL SECTION namel AND name2 TO BE
COMBINED DO NOT HAVE IDENTICAL ATTRIBUTES.
Explanation: The last COMBINE statement
referred to control sections whose
attributes were not the same.
namel and name2 - control section names with
different attributes.
line -- seven-digit line number of source
statement in question.
Conversational Action
User: Replace the COMBINE statement.
omitting those sections that do not have
identical attributes or insert a TRAITS
statement prior to the COMBINE statement
which will assign identical attributes to
the control sections.
System: The COMBINE statement is ignored.
Nonconversational Action
User: N/A
System: The COMBINE statement is ignored.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEYCO
Variable data supplied by: CEYCO
Message residence: MSGDIA
Message issued by: CEYER
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
line E *** CONTROL SECTION name HAS ALREADY BEEN
COMBINED.
Explanation: The last COMBINE statement
contains a duplicate control section name
from the input module which has already been
combined.
name
control section name.
line
seven-digit line number of source
statement in question.
Conversational Action
User: Remove the duplicate name by
correcting the COMBINE statement.
System: The affected statement group is
ignored.
Nonconversational Action
User: N/A
System: The affected statement group is
ignored.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEYCO
Variable data supplied by: CEYCO
Message residence: MSGDIA
Message issued by: CEYER
Destination
Conversational: User's Terminal
Nonconversational:
Task SYSOUT
line E *** CONTROL SECTION narnel OF MODULE name2
DUPLICATES PREVIOUSLY NAMED ENTRY POINT.
Explanation: An INCLUDE or END statement has
created a control section of the same name
as a previously included entry point name.
namel - control section name.
narne2 - module name which contains duplicate
control section name.
454
line -- seven-digit line number of source
statement in question.
Conversational Action
User: Insert a RENAME statement followed by
an INCLUDE statement which changes the
control section name.
System: continues. The ~~ntrol section is
deleted.
Nonconversational Action
User: N/A
System: Continues. The control sectien is
deleted.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEYLK
Variable data supplied by: CEYLK
Message residence: MSGDIA
Message issued by: CEYER
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
line E *** COPIED STATEMENTS CONTAIN A COPY
STATEMENT
Explanation:
See message text.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be n.ade commentary. Assembly will
continue with next statement.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCY
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line E
***
DATA OMITTED FROM DC OPERAND
Explanation: A constant is not Sfecified for a
DC statement.
line -- seven-digit line number of source
statement in question.
Systew Default Action: Associated input line
will be assembled. and an error indicator
will be set for subsequent processing.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCS
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line E
***
DATA STATEMENT AFTER LOGICAL IF
Explanation: A DATA statement afpears as the
consequence of a logical IF.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBM
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E
***
symbol DIMENSION EXCEEDS 255
Explanation: The value of a subscript in a
GBLx or LCLx statement exceeds 255.
Variable portion will be blank.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVGL
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
Requirement determined by: CEVCS
Variable data supplied ty: N/A
CEVDX
CEVDX
line E *** EXPRESSION CONTAINS CONSECUTIVE
OPERATORS
Explanation: Two operators occur in
succession. These operators are
* (multiply), 1, +, -, (,), GE, LT, EQ, NE,
LE, NOT, AND, OR.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVEV
Variable data supplied by:
N/A
Message residence: CEVDX
Message issued by: CEVDX
line E
***
EXPRESSION CONTAINS CONSECUTIVE TERMS
Explanation:
(1) A term follows a right
parenthesis, or (2) Two terms are not
separated ty a blank.
line -- seven-digit line number of source
statement in question.
Systerr Default Action: Associated input line
will be assembled, but an error indicator
will be set for subsequent processing.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVEV
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line E *** EXPRESSION CONTAINS
MULTIPLICATION/DIVISION OF RELOCATABLE TERM(S)
Explanation: An * or / operator precedes or
follows a relocatable term.
line -- seven-digit line nurrber of source
statement in question.
System Default Action: Associated input line
will be assembled, but an error indicator
will be set for subsequent processing.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVEV
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
EXPONENT MODIFIER OUT OF RANGE
Explanation: The combined value of the
exponent and the exponent modifier of an F,
H, E or D type constant does not lie within
the range of -85 to +75.
458
Message residence:
Message issued by:
line E
USAGE
***
EXPRESSION INVALID FOR BASE REGISTER
Explanation: This message can be given under
the following conditions:
(1) The first operand (base value) of a
USING statement was not an absolute or
relocatable expression.
(2) The first operand of a USING statement
was a relocatable expression but the odd
relocatable term was not the location
counter (*> or did not belong to a DC,
DS, machine instruction, LTORG, EQU, or
control section statement, or was not
the operand of an EXTRN statement.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be made commentary. Assemtly will
continue with next statement.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVUP
Variatle data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line
E...
EXPRESSION TOO BIG
The internal representation of a
single expression exceeds the maximum size
allowed in the compiler. Statement fUnction
calls and subscripted variables may make
large contributions to the size of the
internal representation.
line -- seVen-digit line number of source
statement in question.
System Default Action: Associated input line
will be made commentary. Assembly will
continue with next statement.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCN
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
4. Explanation: The operand of a START
instruction is not absolute or null.
Variable portion will contain OPERAND.
~planation:
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAI
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E ••• expression EXPRESSION TYPE INVALID FOR
FIELD
1. Explanation: An expression in the operand
field of an A- or y-type address constant
did not conform to assembler input
specifications.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled with the text for the
adcon in error set to zero.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVAD
Variable data supplied ty: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
2. Explanation:
(1) The command code in the CCW
statement was not an absolute expression: or
(2) the data address was not an atsolute,
relocatable, or complex expression: or (3)
the flag field did not contain an absolute
expression: or (4) the count field did not
contain an absolute expression.
line -- seven-digit line number of source
statement in question.
System Default Action: Field or fields in
error will be zero in the generated channel
command word.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCC
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
3. Explanation: Either operand of a CNOP
instruction contains an expression which is
not absolute, null or indeterminate.
Variable portion will be blank.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled, and operand field will be
treated as null.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCT
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
5. Explanation: Either the command, flag or count
field of a CCW instruction does not contain
an absolute expression. Variable portion
will be blank.
line
seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be made commentary. Assembly will
continue with next statement.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCW
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
6. Explanation: Expression in operand field of
DROP statement was not absolute.
line -- seven-digit line number of source
statement in question.
System Default Action: If no valid operands
were found associated input line will te
made commentary; otherwise, the valid
operands will be processed and the invalid
operands ignored.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVDR
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
7. Explanation: The EQU statement contains an
invalid expression in the operand field.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be made commentary. Assexr,bly will
continue with next statement.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVEQ
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
8. Explanation: The operand in an END statement
specified a complex relocatable expression
459
or a literal.
OPERAND.
Variable portion will contain
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled with binary text of the
entry adcon set to zero.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVEP
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
9. Explanation: The ORG operand field contains
symbols not previously defined or external
symbols. Variable portion will contain
OPERAND.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be ignored. Assembly will continue
with next statement.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVEV
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
10. Explanation: A subscript in a GBLx or LCLx
statement is not an absolute expression.
Variable portion will contain the subscript.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
is assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVGL
Variable data supplied by: CEVGL
Message residence: CEVDX
Message issued by: CEVCX
11. Explanation: Message is produced if any of the
three operands of an ICTL instruction is
neither absolute nor null. Variable portion
will contain OPERAND.
line -- seven-digit line number of source
statement in question.
System Default Action:
If first operand is
neither absolute nor null, associated input
line will be made commentary. Assembly will
continue with next statement. If second or
third operand is neither absolute nor null.
associated input line will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVIC
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by:
CEVDX
12. Explanation: Message is produced if either
operand of an ISEQ statement is neither
blank nor absolute. Variable portion will
contain OPERAND.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be made commentary. Asseml::ly will
continue with next statement.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVIQ
460
Variable data supplied by:
Message residence: CEVDX
Message issued by: CEVDX
CEVDX
13. Explanation: Message is produced if severity
code field of an MNOTE statement is not
absolute or null. or does not contain an
asterisk. variable portion will be blank.
line -- seven-digit line number of source
statement in question.
system Default Action: Associated input line
will be made commentary. AsselT:bly will
continue with next statement.
Reference Data (Also see Appendix B-15.);
Requirement determined by: CEVMN
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
14. Explanation: The B1. B2, R1. R2. R3, or X2
field of an instruction (represented by XX
above) was greater than absolute 15, or not
absolute; or the I or 12 field of an
instruction was either not absolute or
greater than absolute 255; or the D and B
fields of the associated instruction were
not absolute or simply relocatable; or the
length field in an Ss-type instruction was
not absolute or implied.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled with binary text set to
zero for vacuous or unprocessed operand
fields.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVMO
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
15. Explanation: Message is produced if an error
in syntax in the operand field causes a
sub-field to appear to be of the wrong type.
Variable portion will be blank.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVMP
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
16. Explanation: Message is produced if the
operand field of an EQU instruction contains
a syntactical error. Variable portion will
be blank.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be made commentary. Asserr.bly will
continue with next statement.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVQU
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
17. Explanation: Message is produced if the
operand of an ORG statement is Boolean,
literal, or complex type. Variable portion
will be blank.
line -- seven-digit line number of source
statement in question.
system Default Action:
Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVRG
Variable data supplied by: CEVDX
Message residence:
CEVDX
Message issued by: CEVDX
18. Explanation:
absolute.
OPERAND.
CNOP statement operand not
Variable portion will contain
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be made commentary. Asseml::ly will
continue with next statement.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVRS
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by:
CEVDX
19. Explanation: Message is produced for a SETX
instruction under one of the following
conditions:
(1) subscript is not an
absolute expression.
(2) Unsubscripted SETA
does not have an absolute expression in the
operand.
Variable portion will contain
OPERAND.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be made commentary. Asseml::ly will
continue with next statement.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVSE
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by:
CEVDX
20. Explanation: Message is produced if the base
specification field of a USING statement is
null, complex, Boolean, or literal.
The
message is also produced if a register
specification field of a USING or DROP is
not absolute or indeterminate. Variable
portion will contain OPERAND.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be made commentary. Asseml::ly will
continue with next statement.
Reference Data (Also see Appendix B-15.)
Requirement determined l::y: CEVUD
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by:
CEVDX
21. Explanation: A general register operand in a
USING statement was not absolute. variable
portion will contain OPERAND.
line -- seven-digit line nurr~er of source
statement in question.
System Default Action:
If no valid general
register operands were found, the associated
input line will be made commentary;
otherwise, the valid operands will be
processed and the invalid operands ignored.
Assembly will continue with next statement.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVUP
Variable data supplied by:
CEVDX
Message residence: CEVDX
Message issued by: CEVDX
22. Explanation: The operand of a SPACE
instruction is not absolute, null, or
indeterminate. Variable portion will
contain OPERAND.
line -- seven-digit line number of source
statement in question.
Systen-. Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by:
CEVCE
Variable data supplied by: CEVDX
Message residence:
CEVDX
Message issued by: CEVDX
line E
FIELD
***
expression EXPRESSION VALUE INVALID FOR
1. Explanation: An S-type adcon operand has been
scanned for two absolute expressions:
exp
(exp).
The expression within the
farenthesis is not absolute or was greater
than fifteen (15).
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled with the text of the
S-type adcon in error set to zero.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVAD
Variable data supplied by:
CEVDX
Message residence: CEVDX
Message issued by:
CEVDX
2. Explanation:
(1) An illegal command code was
specified, or (2) the data address was
greater than absolute 2 2 "-1, or (3) the flag
field was greater than 255, or (4) the count
field was greater than 21fi-l.
line -- seven-digit line number of source
statement in question.
System Default Action:
Field or fields in
error will be zero in the generated channel
command word.
Reference Data (Also see Appendix B-15.)
Requirement determined by:
CEVCC
Variable data supplied by: CEVDX
Message residence:
CEVDX
Message issued by: CEVDX
3. Explanation:
The value of either operand of a
CNOP instruction is invalid. Valid
combinations of the two operands are:
0,4
2,8
2,4
4,8
0,8
6,8
Variable portion will be blank.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
461
will be made commentary. Assembly will
continue with next statement.
Reference Data (Also see Afpendix B-15.)
Requirement determined by: CEVCN
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
4. Explanation: The operand of a START
instruction contains a negative absolute
value. Variable portion will contain
OPERAND.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled. and the operand will be
treated as nUll.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCT
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
5. Explanation: The absolute value of the DROP
statement operand was greater than 15 or
less than 15 and negative.
line -- seven-digit line number of source
statement in question.
System Default Action: If no valid operands
were found. the associated input line will
be made commentary; otherwise. the valid
operands will be processed and the invalid
operands ignored. Assembly will coninue
with next statement.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CBVDR
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
6. Explanation: Message is produced if any of the
following errors occur on an ICTL statement:
C1} Begin column is less than 1 or greater
than 40.
(2) End column is not greater than 40 or is
greater than 40 or is greater than 80.
(3) continue column is not greater than 1 or
is greater than 40.
Variable portion will contain OPERAND.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be made commentary. Assembly will
continue with next statement.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVIC
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
7. Explanation: Message is produced if any of the
following errors occur in an ISEQ statement:
(1t Left column is greater than BO.
(2) Right column is less than left column.
(3) Right column is greater than BO.
(4) Left column is less than 1.
(5) If left column is less than end column.
it must be less than begin column.
(6) If right column is less than end column.
i t must be less than begin column.
Variable portion will contain OPERAND.
462
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be made commentary. Assembly will
continue with next statement.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVIQ
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
8. Explanation: The length field operand
(represented above by Ll. L2. or L) in an
SS-type instruction was greater than 256 or
16 in the case of packed decimal
instructions.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled with binary text for
length field in error set to zero.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVMO
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
9. Explanation: Message is produced if a register
value greater than 15 or an ill1mediate value
greater than 255 is encountered. variable
portion will be blank.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVMP
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
10. Explanation: Message is produced if the
operand of an unsubscripted or subscripted
SETB has a value greater than one. Variable
~ortion will contain OPERAND.
line -- seven-digit line number of source
statement in question.
Systere Default Action: Associated input line
will be assembled, and value assumed false.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVSE
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
1l.Explanation: Message is produced if a
subscript value is not absolute or. if
absolute. is not greater than zero.
Variable portion will contain SUBSCRIPT.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVSS
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
12.Explanation: Message is produced if a register
specification on a USING or DROP statelf,ent
is not valid. Conditions which are
considered invalid are:
(1) Register value greater than 15.
(2) Negative register value.
Variable portion will contain OPERAND.
line -- seven-digit line number of source
statement in question.
System Default Action: If the statement
contains a valid register specification, it
will be assembled; otherwise, associated
input line is made commentary and assembly
continues with the next statement.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVUD
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
13. Explanation: A general register operand in a
USING or DROP statement was greater than 15
or was negative. Variatle portion will be
blank.
line -- seven-digit line number of source
statement in question.
System Default Action: If no valid general
operands were found, the associated input
line will be made commentary; otherwise, the
valid operands will be processed and the
invalid operands ignored.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVUP
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
line E
**.
EXTERNAL STATEMENT AFTER LOGICAL IF
Explanation: An EXTERNAL statement appears as
the consequent of a logical IF.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAM
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E
PROGRAM
.*.
EXTERNAL STATEMENT IN BLOCK DATA
Explanation: An EXTERNAL statement appears in
a BLOCK DATA subprogram.
line -- seven-digit line n~ber of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAM
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E •• * EXTERNAL SYMBOL name DOES NOT EXIST
Explanation: A control section name, entry
nalI,e, or external name was referred to which
is not defined.
name -- control section name, entry name, or
ext ernal name.
line -- seven-digit line number of source
statement in question.
Conversational Action
User: Enter the corrected name by replacing
the statement.
System: The affected statement group is
ignored.
Nonconversational Action
User: N/A
System: The affected statement group is
ignored.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEYCO, CEYRN, or
CEYTR
Variable data supplied by: CEYCO, CEYRN, or
CEYTR
Message residence: MSGDIA
Message issued by: CEYER
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
line E... EXTERNAL SYMBOL name DUPLICATES OUTPUT
MOCULE NAME
Explanation: The last INCLUDE or END statement
or previous RENAME statement has created a
control section name or entry name which
dUflicates the output module name.
nalIe -- Control section name or entry name
which duplicates the output module name.
line -- seven-digit line number of SOUIce
statement in question.
Conversational Action
User:
Insert a RENAME statement followed by
an INCLUDE statement to delete or change
the duplicate name.
System: Continues. If the user does not
insert a RENAME statement, the duplicate
named control section or entry name is
rejected.
Nonconversational Action
User: N/A
System: continues. The duplicate named
control section or entry name is
rejected.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEYLK or CEYRN
Variable data supplied by: CEYLK or CEYRN
Message residence: MSGDIA
Message issued by: CEYER
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
line E... symbol EXTRN OPERAND DEFINED WITHIN
CURRENT ASSEMBLY CONSIDERED NOT EXTERNAL
Explanation: Message is produced if a symbol
in the operand of an EXTRN statement has
been previously defined. Variable porticn
will contain the symbol.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
463
will be assembled.
Reference Data (Also see A~pendix B-1S.)
Requirement determined by: CEVXN
Variable data supplied by: CEVXN
Message residence: CEVDX
Message issued by: CEVDX
line E
***
Variable data supplied by:
Message residence: CEVDX
Message issued by:
CEVDX
CEVDX
5. Explanation: The name field of a control
section statement contains an invalid
symbol. Variable portion will contain NAME.
field FIELD CONTAINS INVALID SYMBOL
1. Explanation: The first character of a symbol
in the name field is not a letter. Message
is also given if the second character of a
sequence symbol or variable symbol is not a
letter. Variable portion will contain NAME
or OPERAND.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVBS
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by:
CEVDX
2. Explanation: Message is produced if the name
field of a TITLE instruction contains an
invalid symbol. Variable portion will
contain NAME.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-1S.)
Requirement determined by: CEVTI
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by:
CEVDX
3. Explanation: Message is produced if a symbol
in the name field of an instruction is
invalid. Variable portion will contain
NAME.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVSY
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by:
CEVDX
line -- seven-digit line number of source
statement in question.
Systerr. Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCT
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
6. Explanation: The name field of an AGO, CNOP,
DROP, END, ENTRY, EJECT, EXTRN, ICTL, ISEQ,
MEND, MEXIT, MNOTE, ORG, PRINT, SETX, SPACE,
or USING instruction is neither blank nor
contains a sequence symbol. variable
portion will contain NAME.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCE, CEVCN,
CEVEJ, CEVEY, CEVGO, CEVIC, CEVIQ, CEVMN,
CEVMX, CEVND, CEVPR, CEVRG, CEVSE, CEVUD,
or CEVXN
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
7. Explanation:
The operation code field is
presumably a macro but contains an invalid
symbol Variable portion will contain
OPERATION.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be made commentary. AsseRbly will
continue with next statement.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVGP
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by:
CEVDX
line E
4. Explanation: Message is produced if there is a
syntactical error in the name field of an
EQU statement Variable portion will contain
NAME.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be made commentary. Assembly will
continue with next statement.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVQU
***
field FIELD IMPROPERLY DELIMITED
1. Explanation:
The required deliIdter was not
present. See Table 3 for requirements;
variable portion of message (field) is
listed under Message Variable.
line -- seven-digit line number of source
statement in question.
Systerr Default Action: Associated input line
will be assembled. The text for the
remaining fields of the instruction will be
set to O.
Table
3.
Module CEYMO Delimiter Requirements
(Part 1 of 2)
r----------------T-------------------r------------------------------T-------------------,
I
Message
I
Instruction
I
Assembler Operand
I
Required
I
I
Variable
I
Type
I
Field Format
I
Delimiter
I
t----------------+--------------------f------------------------------+-------------------~
I
B1
I
81
I
D1 (B1 ), 12
I)
I
I
I
I
I
I
B1
I
81
I
D1 (B1 )
I
I
I
I
I
I
I
I
I
B1
I
88
I
D1 (L 1 ,B 1 >, D2 (L 2 ,B 2 )
I)
I
I
I
I
I
I
B1
I
88
I
D1 (L,B 1 ), D2 (B 2 )
I)
I
I
i
I
I
I
I
I
B2
I
RX
I
R1 , D2 (X 2 , B 2 )
I
I
I
I
I
I
I
I
B2
I
RX Extended
I
D2 (X 2 ,B 2 )
I
I
I
I
I
I
I
B2
I
R8
I
R1 ,Ra ,D 2 (B 2 )
I
I
I
I
I
I
I
I
I
B2
I
R8
I
Rs.,D2 (B 2 )
I
>
I
I
I
I
I
I
!
B2
I
88
I
Ds. (L1 ,B1 ), D2 (L 2 ,B 2 > !
I
I
I
I
I
I
B2
I
S8
I
D1 (L,B 1 ), D 2 (B 2 >
I
I
I
I
I
I
I
I
B2
I
RX
I
M1O D 2 (X 2 ,B 2 )
I
I
I
I
I
I
I
I
B2
I
R8
I
M1 ,Ra ,D 2 (B 2 )
I
I
I
I
I
I
I
I
B2
I
R8
I
Ms.,D2 (L2 ,B2 >
I
I
I
I
I
I
I
I
D1
I
81
I
D1 (Bs.),12
I
or ,
I
I
I
I
I
I
I
D1
I
S1
I
D1 (Bs.)
I
or blank
I
I
I
I
I
I
I
I
D1
I
88
I
D1 (L1 ,B1 ), D2 (L 2 ,B 2 )
I
or ,
I
I I
I
I
I
I
D1
I
S8
I
D1(Ls.B1>' D2 (B 2 )
I
or ,
I
I
I
I
I
I
I
D2
I
RX
I
R1 ,D2(X2 ,B 2 )
I
or blank
I
I
I
I
I
I
I
D2
I
R8
I
R1 ,R a ,D2 (B2 >
I
or blank
I
I
I
I
I
I
D2
I
RS
I
Rs.,D2 (B 2 )
I
or blank
I
I
I
I
I
I
I
I
D2
I
8S
I
Ds.(LlI Bs.), D2 (L 2 ,B 2 )
I
or blank
I
i
I
I
I
I
D2
I
SS
I
Ds.€L,B1 >, D2 (B2 >
I
or blank
I
I
i
I
I
I
I
I
D2
I
RX
I
M ,D2 (X 2 , B 2 )
I
or blank
I
I
I
I
I
I
I
D2
I
RS
I
M1 ,Ra ,D2 (B2 >
I
or blank
I
I
I
I
I
I
I
D2
I
R8
I
Ms.,D2 (L2 ,B 2 )
I
or blank
I
I
I
I
I
I
I
I
I
RR
I
I
I
blank
I
I
I
I
I
I
12
I
SI
I
D1 (8 1 ),1 2
I
blank
I
I
I
i
I
810 1 2
I
blank
I
I
I
I
I
I
I
L
I
S8
I
D1 (L,B 1 ),D 2 (B 2 )
I
or
I
I
I
I
8 1 (L) , 8 2
I
I
I
I
I
I
I
I
L1
I
S8
I
D1(L1,B1>,D2(L2,B2)
I
or
I
I
I
I
8s. (L1 > ,S2(L2 )
I
I
I
I
I
I
I
I
L2
I
S8
I
D1(L1,B1>,D2(L2,B2)
I
or )
I
IL- _______________ I ___________________ I ______________________________
S1(L1 >,8 2 (L 2 )
I
)
___________________
JI
~
~
~
465
Table
3.
Module CEYMO Delimiter Requirements (Part 2 of 2)
r----------------T-------------------T-----------------------------~-------------------,
I
I
Message
Variable
I
I
Instruction
Type
I
I
Assembler Operand
Field Format
I
I
Required
Delimiter
I
I
r----------------+-------------------+------------------------------+-------------------1
I
L..
I
RS
I
M1r D:a(L .. ,B:a)
I , or )
t
I
I
I
I
I
I
M1.
I
RX
I
M1rD:a (X .. ,B:a)
I
I
I
I
I
I
I
M1.
I
RR
I
M1. , R:a
I
,
I
I
I
I
I
I
M1.
I
RS
I
M1r R 3 ,D:a(B:a)
I
I
I
I
I
I
I
I
M1.
I
RS
I
M1r D.. (L:a,E .. )
I
I
I
I
I
I
I
I
I
Ri
I
RR
I
R1., R.2
I
I
I
I
I
I
R:1.
I
RR
R1.
I
blank
I
I
I
I
I !
I
Ri
f
RX
R:1.t D.. (X:a,B:a)
I
I
I
I
R1.. S:a(X .. )
I
I
I
I
I
I
Ri
I
RS
Ri ,R 3 ,D .. (B .. )
I
I
I
Ri .R3 ,S3
I
I
I
I
I
I
I
I
Ri
I
RS
R1r D:a(B .. )
I
I
I
I
I
R i • S..
I
I
I
I
I
I
I
R..
I
RR
R:1..R..
I
blank
I
I
I
I
I
I
R..
I
RR Extended
R..
I
blank
I
I
I
I
I
R..
I
RR
M1.,R..
I
blank
I
I
I
I
I
I
I
R3
I
RS
Ri ,R3 ,D .. (B .. )
I
I
I
I
R1r R3,S:a
I
I
I
I
I
I
R3
I
RS
Mu R3 ,D .. (B .. )
I
I
I
I
I
I
I
S:1.
I
SI
S 1., 1:a
I
I
I
I
I
I
I
I
S1.
I
SI
Si
I
blank
I
I
I
I
I
Si
I
SS
Si(Li},S .. (L:a)
I
or ,
I
I
I
I
I
I
Si
I
SS
Si(L),S..
I
or ,
I
I
I
I
I
I
s..
I
RX
R1r s .. (X .. )
I
or
I
I
I
I
I
I
s..
I
RX Extended
S .. (X .. )
I
or
I
I
I
I
I
I
I
s..
I
RS
Ri ,R 3 ,S..
I
blank
I
I
I
I
I
I
s..
I
RS
R1r S..
I
blank
I
I
I
I
I
S2
I
SS
Si(L i ),S2(L.. )
I
( or blank
I
I
I
I
I
I
s..
I
ss
S1.(L),S..
I
blank
I
I
I
I
I
I
I
X2
I
RX
Ri,L .. (X..,B .. )
I
or
I
I
I
R1., S .. (X .. )
I
I
I
I
I
I
X2
I
RX Extended
D.. (X 2 ,B .. )
I , or
I
I
I
I
S2 (X .. )
I
I
I
I
I
I
X..
I ___________________
RX
I ______________________________
M:1.tD .. ,X .. ,B .. )
I
. or
lI ________________
___________________
J!
~
Reference Data (Also see AFpendix B-15.)
Requirement determined by: CEVMO
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by:
CEVDX
466
~
~
2. Explanation: The operand field of GBLx or LCLx
(x - A, B, or C) or of a CCW, CNOP, DROP,
END, ENTRY, EXTRN, ICTL, ORG, or USING
statement is not delimited by a blank.
Variable portion will contain OPERAND.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCN, CEVCW,
CEVEP, CEVEY, CEVGL, CEVIC, CEVND, CEVRG,
CEVUD, CEVUP, or CEVXN
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
3. Explanation: Message is produced if the name
field of an EQU or SPACE statement is not
delimited by a blank. Variable portion will
contain NAME.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-l5.)
Requirement determined by: CEVCE or CEVQU
Variable data supplied by: CEVDX
Message residence: CEVCX
Message issued by: CEVDX
4. Explanation: DROP, ENTRY, or ORG statement
operand field was not delimited by a comma
or blank. Variable portion will contain
OPERAND.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled with the expression in the
ORG operand terminated by the invalid
delimiter.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVGN
Variable data supplied by: CEVDX
Message residence: CEVCX
Message issued by: CEVDX
5. Explanation: An address constant operand in a
DC statement was not delimited by a right
parenthesis or comma.
line -- seven-digit line number of source
statement in question.
System nefault Action: Associated input line
will be assenililed with the text of the adcon
in error set to zero.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVAD
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVLX
6. Explanation: An invalid character exists in
the name field. These include a period or
ampersand which is not the first character
of the name. This message is also produced
if a hexadecimal or binary self-defining
term is not properly delimited. Variable
portion will contain NAME or OPERAND.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-l5.)
Requirement determined by: CEVBS
Variable data supplied by: CEVDX
Message residence:
Message issued by:
CEVDX
CEVDX
7. Explanation: Message is produced if the name
field of an instruction is not delimited by
a blank. Variable portion will contain
NA!!E.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVSY
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
8. Explanation: Message is produced for a SETX
instruction under the following conditions:
(1) Name field is not delimited by a blank.
Variable portion will contain NAME.
(2) Operand field is not delimited by a
blank or, if a SETB statement, by a
right parenthesis. Variable portion
will contain OPERAND.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
~ill be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVSE
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
9. Explanation: Message is produced if the
operand field of a PRINT statement is not
delimited by a blank. Variable portion will
be blank.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVPR
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
lO.Explanation: Message is produced if the
operand field of a machine instruction is
not delimited by a blank, tab character, or
right parenthesis, as appropriate. Variable
portion will contain OPERAND.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVMP
Variable data supplied by: CEVnX
Message residence: CEVDX
Message issued by: CEVDX
1i.Explanation: Message is produced if severity
code field of an MNOTE statement is not
delimited by a comma. Variable portion will
be blank.
line -- seven-digit line number of source
statement in question.
467
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVMN
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
12.Explanation: Message is produced if the first
operand of an ISEQ statement is not
delimited by a comma, or if the second
operand is not delimited by a blank. e
portion will contain OPERAND.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be made commentary. Assembly will
continue with next statement.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVIQ
Variable data supplied by: CEVDX
Message residence: CEVCX
Message issued by: CEVDX
13. Explanation:
(1) The command field, data
address or flag field was not delimited by a
comma; or (2) the count field in a CCW
statement was not terminated by a blank.
line -- seven-digit line number of source
statement in question.
System Default Action: The result of the
erroneous expression will be mapped into the
generated CCW. All subsequent operand
fields will be set to zero.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCC
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
14.Explanation: Either the name or operand field
of a control section statement is not
delimited by a blank. Variable portion will
contain NAME or OPERAND.
line -- seven-digit line nurrber of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCT
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
15. Explanation: The operand field of an AGO or
AIF is not delimited by a blank or right
parentheSiS, as appropriate. Variable
portion will contain OPERAND.
Explanation: ADD, D, DR, M, MOD, MR, and SDD
instructions require an even numbered
register in the R1 field.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled with Rl field in binary
text set to zero.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVMO
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
line E *** expression FIELD REQUIRES
FLOATING-POINT REGISTER
Explanation: Ri field was·not 0, 2, 4 or 6 for
an instruction specifying floating-point
registers, or R2 field was not 0, 2, 4 or 6
for an RR-type instruction requiring
floating-point registers. Variable portion
will contain Rl or R2.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVMO
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
line E *** name FILE OVERFLOWED.
TERMINATED.
ASSEMBLY
1. Explanation: Insufficient working storage is
available for the assembler's requirement
for constructing the external name list.
Variable portion will contain EXT NAME.
line -- seven-digit line number of source
statement in question.
System Default Action: Abnormal termination of
assembly.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVPE
Variable data supplied by: CEVPE
Message residence: CEVDX
Message issued by: CEVDX
2. Explanation: Insufficient working storage is
available for the assembler's requirement
for constructing the program module
dictionary. variable portion will contain
PMD.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined ty: CEVGO
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by:
CEVDX
line -- seven-digit line number of source
statement in question.
Systen Default Action: Abnormal termination of
assembly.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCD
Variable data supplied by: CEVCD
Message residence: CEVDX
Message issued by: CEVDX
line E *** register FIELD REQUIRES EVEN-NUMBERED
REGISTER
line E *** FIAG FIELD REQUIRES ZERO IN LOW-ORDER 3
EITS
468
Explanation: The absolute expression in the
flag field of the channel command word was
less than 256 but the low order 3 bits were
not zero.
line -- seven-digit line number of source
statement in question.
System Default Action: Bits 37-39 in the
generated CCW will be set to zero.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCC
Variable data supplied £y: N/A
Message residence: CEVDX
Message issued by: CEVDX
line E *** FLOATING POINT CHARACTERISTIC OUT OF
BOUNDS
Explanation: The characteristic of a floating
point number is not within the limits of
-127 to +127.
line
seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled, and value of constant
will be set to O. An error indicator is set
for subsequent processing.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCS
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line E *** FORM-1 INCLUDE STATEMENT NOT YET GIVEN
Explanation: A form-2 or form-3 INCLUDE
statement was given without a prior form-1.
INCLUDE statement, or a forrn-1 INCLUDE
statement was not given following a RENAME,
TRAITS, or COMBINE statement.
line -- seven-digit line number of source
statement in question.
Conversational Action
User: Insert a form-1 INCLUDE statement in
front of a form-2 or forrn-3 INCLUDE
statement.
System: The affected statement group is
ignored.
Nonconversational Action
User: N/A
System: The affected statement group is
ignored.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEYIC
Variable data supplied by: N/A
Message residence: MSGDIA
Message issued by: CEYER
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
line E *** FORMAL ARGUMENT name APPEARS MORE THAN
ONCE IN THIS STATEMENT
1. Explanation: In a SUBROUTINE, FUNCTION, or
ENTRY statement, a name is presented more
than once'as a formal argument in the same
statement.
name -- An alphameric name from the source
program.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBS
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
2. Explanation: The named argument appears more
than once as argument in a statement
function definition.
name -- An alphameric name from the source
program.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBK
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
line E *.* FORMAT name IS A 00 LOOP VARIABLE OR
PARAMETER
Explanation: A variable name specified as a
FORMAT in an I/O statement is an active DO
loop variable, limit, or step. Hence its
current value must not be alphanumeric
FORMAT materia1.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKCF
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
line E **. FORMAT STATEMENT AFTER LOGICAL IF
Explanation: A FORMAT statement occurs as the
consequent of a Logical IF.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBF
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
*..
line E
FOR~AT STATEMENT DOES NOT HAVE
STATEMENT NUMBER
Explanation: The statement number field of a
FORMAT statement is blank or zero.
line -- seven-digit line number of source
statement in question.
469
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBF
Variable data supplied by:
N/A
Message residence: CEKCA
Message issued by: CEKTH
line
E...
FORMAT STATEMENT IN BLOCK DATA PROGRAM
Explanation: A FORMAT statement occurs in a
BLOCK DATA subprogram.
line -- seven-digit line number of source
statement in question.
System Default Action:
Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBF
Variable data supplied by:
N/A
Message residence: CEKCA
Message issued by: CEKTH
E...
line
FORTRAN MAIN PROGRAM name CANNOT BE
LINKED. THE OUTPUT MODULE CANNOT CONTAIN TWO
FORTRAN MAIN PROGRAMS
Explanation: The user cannot include two
separately generated program modules into
one output module if both are FORTRAN main
modules.
This situation may be a by-product
of an automatic search.
name -- second main FORTRAN input module
line -- seven-digit line number of source
statement in question.
Conversational Action
User: Reenter an INCLUDE statement that
does not specify two FORTRAN main
modules.
System:
Continues.
If a new INCLUDE
statement is not issued, the output
module will not be produced.
Nonconversational Action
User:
N/A
System: Continues.
The output module will
not be produced.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEYIC
Variable data supplied by: CEYIC
Message residence: MSGDIA
Message issued by: CEYER
Destination
Conversational: User's terminal.
Nonconversational:
Task SYSOUT.
line E ••• name HAS NOT BEEN DECLARED AN ARRAY
Explanation: An undimensioned variable name
appeared with a subscript in a DATA
statement or to the left of the equal sign
in an ASSIGNMENT statement.
name -- An alphameric name from the source
program.
line -- seven-digit line number of source
statement in question.
System Default Action:
Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAG or CEKAI
470
Variable data supplied by:
Message residence: CEKCA
Message issued by: CEKTB
CEKCA
line E ••• ILLEGAL ALPHANUMERIC FIELD
Explanation: An alphameric field contains
either no characters, a colon e:), the
characters OB, or a quotation mark (ft).
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAE or CEKBF
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
E...
line
ILLEGAL ARGUMENT IN STATEMENT FUNCTION
DEFINITION
Explanation: In a Statement Function
definition, the left parenthesis or a comma
in the argument list is not followed by an
alphameric name.
line -- seven-digit line number of source
statement in question.
Systerr Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBK
Variable data supplied by:
N/A
Message residence: CEKCA
Message issued by: CEKTB
line E ••• ILLEGAL ARGUMENT TYPE USED FOR FUNCTION
name
1. Explanation: An incorrect argument list is
given for a calIon an intrinsic function
name:
FLOAT, DFLOAT, IFIX, HFIX, SIGN, ISIGN,
DSIGN, DIM, IDIM, MOD, AMOn, DMOD, IABS,
ABS, DABS, CABS, CDABS, INT, AINT, IDINT,
SNGL, REAL, AIMAG, DBLE, CMPLX, DCMPLX,
CON.JG , DCON.JG
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAI
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
2. Explanation: An actual argument presented in a
Statement Function call does not have the
same type as the corresponding formal
argument.
name -- An alphameric name from the source
program.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-1S.)
Requirement determined by: CEKBL
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
line E
*** ILLEGAL COMPLEX CONSTANT
Explanation: In an expression, a complex
constant appears whose imaginary part is not
a real constant. In an initial value
specification, a left parenthesis appears
which is not followed by a pair of real
constants.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-iS.)
Requirement determined by: CEKAE
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E
*** ILLEGAL DELIMITER
Explanation: A delimiting character was
misused, or an illegal delimiter was used.
line -- seven-digit line number of source
statement in question.
Conversational Action
User: Replace the statement.
System: The affected statement group is
ignored.
Nonconversational Action
User: N/A
System: The affected statement group is
ignored.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEYCO, CEYIA,
CEYIC, CEYRN, or CEYTR
Variable data supplied by: N/A,
Message residence: MSGDIA
Message issued by: CEYER
Destination
Conversational: User's Terminal
~onconversational:
Task SYSOUT
line E
*** ILLEGAL EXPONENT FIELD ON REAL CONSTANT
Explanation: The letter D or E following a
real constant is not followed by a signed or
unsigned integer exponent.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAE
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E
*** ILLEGAL EXPRESSION
Explanation: A serious syntactic error has
occurred in an expression or CALL statement.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-1S.)
Requirement determined by: CEKAI
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E
***
ILLEGAL EXPRESSION IN SUBSCRIPT ON name
Explanation: A subscript expression is either
not a legal arithmetic expression at all, or
does not meet the restrictions of
-generalized linear B form; that is, a sum of
positive or negative integer constants,
integer variables, and constants times
variables.
name -- An alphanumeric name from the source
program.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-iS.)
Requirement determined by: CEKAG
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
line E *** ILLEGAL EXPRESSION.
WHERE REQUIRED.
OPERAND NOT FOUND
Explanation: Two consecutive operators have
occurred in an expression.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-iS.)
Requirement determined by: CEKAI
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E *** ILLEGAL EXPRESSION.
WHERE REQUIRED
OPERATOR NOT FOUND
Explanation: Two consecutive operands have
appeared in an expression.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAI
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E *** ILLEGAL EXPRESSION.
WHERE REQUIRED BEFORE (.
OPERATOR NOT FOUND
Explanation: A left parenthesis has appeared
in an eXpression, immediately preceded by an
471
undimensioned variable, a constant, or a
right parenthesis.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAI
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E *** ILLEGAL EXPRESSION.
PARENTHESES
TOO MANY LEFT
Explanation: Parenthesis imbalance in an
expression contained in a Statement Function
call or a CALL statement.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CERAI or CEKBL
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E *** ILLEGAL EXPRESSION.
PARENTHESES.
TOO MANY RIGHT
Explanation: Parenthesis imbalance in a CALL
statement or on the right of an assignment
statement.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAI
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E
***
ILLEGAL LEFT SIDE OF
Explanation: In an apparent statement Function
definition, a delimiter other than comma or
right parenthesis appears in the argument
list. An ASSignment statement may appear to
be a Statement Fancion definiton if its left
Side is a subscripted variable for which no
dimensions have been given.
1. Explanation: An incorrect argument list is
given for a calIon a library or intrinsic
function name: EXP, DEXP, CEXP, CDEXP,
ALOG, DLOG, CLOG, CDLOG, ALOG10, DLOGI0,
ARSIN, DARSIN, ARCOS, DARCOS, ATAN, ATAN2,
DATAN, DATAN2, SIN, DSIN, CSIN, CDSIN, COS,
COS, CCOS, CDCOS, TAN, DTAN, COTAN, DCOTAN,
SQRT, DSQRT, CSQRT, CDSQRT, TANH, DTANH,
FLOAT, DFLOAT, IFIX, HFIX, SIGN, ISIGN,
DSIGN, DIM, IDIM, SINH, DSINH, COSH, DCOSH,
ERF, DERF, ERFC, DERFC, GAMMA, DGAMMA,
ALGAMA, MOD, AMOD, DMOD, lABS, ABS, DABS,
CABS, CDABS, INI', AINI', IDINT, SNGL, REAL,
AlMAG, DBLE, CMPLX, DCMPLX, CONJG, DCONJG
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15~)
Requirement determined by: CEKAI
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
2. Explanation: More than 15 formal arguments
have been specified for the named statement
function.
name -- An alphameric name from the source
program.
line -- seven-digit line number of source
statement in question.
System Default Action:
Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBK
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
3. Explanation: The number of arguments appearing
in a Statement Function call does not agree
with the number given in the function
definition.
narre -- An alphameric name from the source
program.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBL
Variable data supplied by: CEKCA
Message residence: CERCA
Message issued by: CEKTH
line E
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBK
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E *** ILLEGAL NUMBER OF ARGUMENTS USED FOR
FUNCTION name
472
***
ILLEGAL OPERAND ON name STATEMENT
Explanation: The name: STOP. PAUSE, or RETURN
is the statement being processed.
name -- STOP, PAUSE. or RETURN
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBG
Variable data supplied by: CEKCA
Message residence:
Message issued by:
line
E...
CEKCA
CEKTH
ILLEGAL OPERATION SYMBOL
Explanation: The operation specified in the
last statement is not a linkage editor
statement.
line -- seven-digit line number of source
statement in question.
Conversational Action
User: Replace the statement in error.
S}stem: The affected statement group is
ignored.
Nonconversational Action
User: N/A
System: The affected statement group is
ignored.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEYIA
Variable data supplied by: N/A
Message residence: MSGDIA
Message issued by: CEYER
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
.**
line E
STATEMENT
ILLEGAL PLACEMENT OF BLOCK DATA
EXplanation: A BLOCK DATA statement appears in
a program, preceded by another statement
which is not an IMPLICIT statement.
line -- seven-digit line number of source
statement in question.
System Default Action:
Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBI
Variable data supplied by:
N/A
Message residence: CEKCA
Message issued by: CEKTH
line
E...
ILLEGAL PLACEMENT OF IMPLICIT STATEMENT
EXplanation: An IMPLICIT statement either:
1. appears as the consequent of a logical
IF;
2. appears other than as the first statement
of a program, or the second statement of
a subprogram following the SUBROUTINE,
FUNCTION, or BLOCK DATA statement.
line -- seven-digit line number of source
statement in question.
System Default Action:
Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by:
CEKBN
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line
E...
ILLEGAL PLACEMENT OF name STATEMENT
Explanation: A SUBROUTINE or FUNCTION
statement appears following another
statement other than an IMPLICIT statement.
name -- SUBROUTINE or FUNCTION
line -- seven-digit line number of source
statement in question.
System Default Action:
Ignore the statement
and continue •.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBS
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
line E ••• ILLEGAL PLACEMENT OF STATEMENT FUNCTION
STATEMENT
Explanation: An apparent Statement Function
definition appears in a program after an
executable statement has already appeared.
An Assignment statement may appear to be a
Statement FUnction definition if its left
side is a subscripted variable for which no
dimensions have been given.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEXBK
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E
.*.
ILLEGAL name STATEMENT
Explanation: A statement containing an
expression is not correctly formed.
name
CALL or IF
line
seven-digit line number of source
statement in question.
System Default Action:
Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CERAI
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
line E ••• ILLEGAL STATEMENT NUMBER
1. Explanation: A statement number specification
in an arithmetic IF, GO TO, DO, or ASSIGN
statement is zero.
line -- seven-digit line number of source
statement in question.
System Default Action:
Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAR, CEKAZ,
CEKBC, or CEKCC
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
2. Explanation: In an unconditional GO TO
statement, the keyword GO TO is not followed
by a non-zero integer statement number.
473
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see AFpendix B-15.)
Requirement determined by: CEKAQ
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAI
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
2. Explanation: An illegal pair of types occurs
across an equal sign, or on the operands of
an arithmetic operation.
3. Explanation: The statement number specified in
either an error or end-data-set transfer
specification of a READ statement is zero.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKCE
Variable data supplied by: N/A
Message residence:
CEKCA
Message issued by:
CEKTH
operator:
+
*
line E
line -- seven-digit line number of source
statement in question.
System Default Action:
Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKCD
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
5. EXplanation: A non-numeric character aFpears
in the statement number field of a FORMAT
statement.
line -- seven-digit line number of source
statement in question.
System Default Action:
Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBF
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
*.*
line E
ILLEGAL TYPE MIX ON operator
1. Explanation: An illegal pair of types occurs
on the operands of an operator, or illegal
operand type appears for a unary operator.
operator:
+
*
/
**
.LT.
.LE.
. EQ.
.NE.
.GE.
. GT.
.NOT.
.AND.
.OR.
line
seven-digit line number of source
statement in question.
System Default Action:
Ignore the statement.
and continue.
~7~
**
line
seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by:
CEKAN
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
Explanation: The format statement number
specification in an I/O statement is zero.
~.
/
* ..
ILLEGAL TYPE MODIFIER AF'IER
*
1. Explanation: An asterisk in a TYPE statement
is followed by a syntactically incorrect
type modifier.
line -- seven-digit line number of source
statement in question.
system Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAS
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
2. Explanation: In an IMPLICIT statement, a type
name and asterisk is not followed by an
integer constant type modifier.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBN
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
3. Explanation:
In a FUNCTION statement with type
declaration, the function name and asterisk
are not followed by an integer constant tYFe
modifier.
line -- seven-digit line number of source
statement in question.
Systew Default Action:
Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBS
Variable data supplied by:
N/A
Message residence: CEKCA
Message issued by: CEKTH
line E *** ILLEGAL TYPE ON IF EXPRESSION
Explanation: The conditional expression in an
IF statement is either an alphameric
constant or a complex constant, variable, or
expression.
line -- seven-digit line number of source
statement in question.
system Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAR
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E
***
symbol ILLEGAL USAGE RESERVED WORD
1. Explanation: Either &SYSNDX, &SYSECT,
&SYSPSCT, &SYSTYP, or &SYSLIST has been
misused. An attempt has been made to
redefine the symbol designated in the
message. This was done by declaring the
system symbol as a positional prototype
operand, or as a keyword in the prototype
and/or macro instruction statements.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated macro
instruction statement will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVPM
Variable data supplied by: CEVPM
Message residence: CEVDX
Message issued by: CEVDX
2. Explanation: A loop specification in an I/O
list is not preceded by a comma.
symbol -- PRINT; PUNCH; WRITE; or READ.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBW
Var~able data supplied by:
CEKCA
Message Residence: CEKCA
Message issued by: CEKTH
line E *** ILLEGAL USE OF
=
IN name STATEMENT
Explanation: An equal sign has occurred in an
expression in a non-assignment statement.
name
Explanation: An = appears in the data set
reference number and FORMAT specification
area of a WRITE statement.
line
seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBE
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E
***
ILLEGAL USE OF ALTERNATE RETURN
Explanation: An alternate return specification
appears in the argument list for a function
call.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAI
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E *** ILLEGAL USE OF DXD SYMBOL
Explanation:
(1) A DXD symbol was used within
an A- or y-type address constant, but was
not paired with the same symbol with
opposite sign.
(2) An expression contains a DXD symbol in
an illegal context.
line -- seVen-digit line number of source
statement in question.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVEV, CEVPV
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line E *** ILLEGAL USE OF NAME name
Explanation: A name has been given in the
statement that contains more than eight
characters or is misspelled, or a required
name has been omitted. The latter may be
caused by the presence of extraneous
delimiting characters.
narr,e -- Illegal name given in a link editor
control statement.
CALL or IF
line
seven-digit line nunber of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAI
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
line E *** ILLEGAL USE OF
IN WRITE STATEMENT
line -- seven-digit line number of source
statement in question.
Conversational Action
User: Insert the corrected nan,e by
repeating the statement.
System: Continue. If the response is mot
made, the affected statement group is
ignored.
Nonconversational Action
User: N/A
system: The affected statement group is
ignored.
Reference Data (Also see Appendix B-15.)
General Messages
475
Requirement determined by: CEYSC or CEYTR
Variable data supplied by: CEYSC or CEYTR
Message residence: MSGDIA
Message issued by: CEYER
Destination
Conversational: User·s Terminal
Nonconversational: Task SYSOUT
line E *** ILLEGAL USE OF NAMELIST NAME IN name
STATEf.!ENT
Explanation: A namelist name is specified
instead of a FORMAT in a PRINT or PUNCH
statement or a READ without a UNIT
statement.
name
***
expression IMPLIED LENGTH TOO LARGE
Explanation: A packed decimal SS-type
instruction contained an operand
(represented by L1, L2, or L for above
expression) with an implied length greater
than 16 or another Ss-type instruction
contained an operand with an implied length
greater than 256.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled; length field in error
will be set to zero.
Reference Data (Also see Appendix B-15.)
Requi rement determined by: CEVMO
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
line E *** IMPROPER OPERAND FOR Q-TYPE ADDRESS
CONSTANT
Explanation: The symbol enclosed in
parentheses in a Q-type address constant
must be the name of either a DXD or a DSECT.
line -- seven-digit line number of source
statement in question.
System Default Action: spaces reserved and set
to zero.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCS, CEVAD
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line E *** IMPROPER OPERAND FOR R-TYPE ADDRESS
CONSTANT
Explanation: An invalid symbol occurs in the
operand of an R-type address constant.
476
line E *** IMPROPER OPERAND FOR V-TYPE ADDRESS
CONSTANT
EXPlanation: An invalid symbol occurs in the
operand of a V-type address constant.
PRINT, PUNCH, or READ
line
seven-digit line number of source
statement in question.
System Default Action:
Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CERCF
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
line E
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled, but an error indicator
will be set for subsequent processing.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCS
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled, but an error indicator
will be set for subsequent processing.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCS
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line E *** name INCOMPATIBLE CONTROL SECTION
FIRST DEFINITION USED.
STATEMENTS.
Explanation: The name of a control section
duplicates the name of another control
section of a different type. Variable
portion will contain the name.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled, and name field treated as
blank except for PSECT or DSECT. An
additional message will be given for PSECT
or DSECT.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCT
Variable data supplied by: CEVCT
Message residence: CEVDX
Message issued by: CEVDX
line E
.**
INCOMPLETE ALPHAMERIC FIELD
1. Explanation: In an alphameric constant
starting with a quotation mark, the closing
quotation mark is missing.
In an alphameric
constant starting with nH, less than n
characters remain in the statement.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAE or CEKBF
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
2. Explanation: In a FORMAT statement, the
clOSing quotation mark is missing on an
alphameric field, or the value of n in an DE
field exceeds the number of characters
remaining in the statement.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBF
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line
E...
INCOMPLETE SUBSCRIPT ON name
Explanation: The closing right parenthesis for
a subscript expression is missing.
name -- an alphameric name from the source
program.
line -- seven-digit line number of source
statement in question.
system Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAG
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTB
line E **. INCONSISTENT OPERAND
Explanation: Message is produced if the user
specifies inconsistent options in the
operand of a PRINT statement, e.g.: PRINT.
GEN or NOGEN, or if an attribute appears in
a control section statement more than once.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCT or CEVPR
Variable data supplied by: N/A
Message residence: CEVPR
Message issued by: CEVPR
line E *.* INSTRUCTION
INVALI~
OUTSIDE OF MACRO
Explanation: Message is produced if a MEND,
MEXIT, or MNOTE statement is encountered
outside of a macro.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be made commentary. Assembly will
continue with next statement.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVMN or CEVMX
Variable data supplied by: N/A
Message residence: CEV~X
Message issued by: CEVDX
line
E...
symbol INVALID ATTRIBUTE
Explanation: An attribute is invalid:
1. If the type attribute of an integer is
specified.
2. If symbol is not subscripted, and it is
not a parameter or &SYSLIST.
3. If symbol is &SYSLIST, attricute is not
N' •
4. If symbol is a parameter but argument
string is not a symbol.
5. If symbol is a parameter and the
attribute is T'.
6. If symbol occurs in a string substitution
and the type of attribute has been
disallowed.
Variable portion will contain the symbol.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled but an error indicator is
set for subsequent processing.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVEV or CEVSS
Variable data supplied by: CEVEV or CEVSS
Message residence: CEVDX
Message issued by: CEVDX
line
E...
INVALID BINARY CONSTANT
Explanation: A character other than 0 or 1 is
encountered in a binary constant.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled, and value of constant
will be set to O. An error indicator is set
for subsequent processing.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCS
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line E
*..
INVALID BINARY SELF-DEFINING TERM
Explanation: A character in a binary
self-defining term is not 0 or 1; or the
term has more than 32 characters.
line -- seven-digit line number of source
statement in question.
Syste~ Default Action:
Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVBS or CEVGB
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line E **. INVALID CHARACTER SELF-DEFINING TERM
Explanation: The length of a character
self-defining term exceeds 4.
line -- seven-digit line number of source
statement in question.
.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVGC
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
.*.
line E
name INVALID CONTROL SECTION ATTRIBUTE
NAME. NOT USED.
General Messages
477
Explanation: A declared attribute of a control
section statement is not PUBLIC, READONLY,
VARIABLE, PRIVLGD, or SYSTEM. Variable
portion will contain the control section
name.
line -- seven-digit line number of source
statement in question.
system Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCT
Variable data supplied by: CEVCT
Message residence: CEVDX
Message issued by: CEVDX
line E
***
INVALID DECIMAL CONSTANT
Explanation: A non-decimal character is
encountered in an F, H, E, D, P, or Z type
constant.
line -- seven-digit line number of source
statement in question.
system Default Action: Associated input line
will be assembled, but an error indicator
will be set for subsequent processing.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCS
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line E
***
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVGD
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
***
INVALID HEXADECIMAL CONSTANT
Explanation: A non-hexadecimal character is
encountered in a hexadecimal constant.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled, and value of constant
will be set to O. An error indicator is set
for subsequent processing.
Reference Data (Also see Appendix E-15.)
Requirement determined by: CEVCS
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line E
**.
INVALID HEXADECIMAL SELF-DEFINING TERM
Explanation: A non-hexadecimal character is
found in a hexadecimal self-defining term,
478
line -- seven-digit line number of source
statement in question.
system Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVGH
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line E
***
symtol INVALID KEYWORD
Explanation: Either the keyword is longer than
seven characters, or the first character
after the ampersand is not alphabetic, R#R
• ", or tI$".
System Default Action: The macro instruction
operand associated with this keyword will
not appear in the macro expansion.
Reference Data
Requirement determined by: CEVPM
Variable data supplied by: CEVPM
Message residence: CEVDX
Message iSSUed by: CEVDX
line E
***
INVALID OPERAND FIELD
1. Explanation: Various errors in syntax occur in
the operand of a DC or DS statement. The
message is also given if the operand field
is not properly delimited.
INVALID DECIMAL SELF-DEFINING TERM
Explanation: A non-decimal character occurs in
a decimal self-defining term, or the number
is greater than 2147483647.
line E
or the length of the character string
exceeds 8.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled, but an error indicator
will be set for subsequent processing.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCS
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
2. Explanation: The name in the operand field of
a copy statement contains more than eight
characters.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be made commentary. Assembly will
continue with next statement.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCY
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
3. Explanation: The type of a symbol is invalid,
or a syntactical error is found in a
literal.
line -- seven-digit line number of souree
statement in question.
System Default Action: Associated input line
will be assembled, but an error indicator
will be set for subsequent processing.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVEV
Variable data supplied by: N/A
Message residence:
Message issued by:
CEVDX
CEVDX
4. Explanation: The operand field of an ENTRY or
EXTRN statement does not contain a valid
symbol.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVEY or CEVXN
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
5. Explanation: There is an error in syntax in
the operand field of a global, local. AIF.
or AGO instruction.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVGL or CEVGO
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
6. Explanation:
Message is produced if a
character string is missing from the operand
of an MNOTE. SE~C, or TITLE instruction.
line -- seven-digit line nunber of source
statement in question.
system Default Action: Associated input line
will be made commentary. Assembly will
continue with next statement.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVMN, CEVSE, or
CEVTI
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
7. Explanation: ENTRY statement operand field
blank or symbol declared in ENTRY statement
but not defined in assembly.
lille -- seven-digit line number of source
statement in question.
System Default Action: If no valid operands
were found the associated input line will be
made commentary; otherwise, the valid
operands will be processed as entries and
the invalid operands ignored.
Assembly will
continue with next statement.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVPD
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
8. Explanation: The SPACE statement did not
contain an absolute operand.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled; but no action will be
taken.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVPE
Variable data supplied by:
Message residence: CEVDX
Message issued by: CEVDX
N/A
9. Explanation:
The first operand (base value) in
a USING statement is not a relocatable
symbol in the current assembly and the
second operand is absolute zero (3).
li.ne -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be made commentary. Assembly will
continue with next statement.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVUP
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line E *** symbol INVALID OPERAND FOR PRINT
STATEMENT
Explanation: Message is produced if an operand
field of a PRINT statement does not contain
one of the following: ON, OFF. GEN, NOGEN.
FULLGEN. DATA, or NODATA. Variable portion
will contain the invalid symbol.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVPR
Variable data supplied by: CEVPR
Message residence: CEVDX
Message issued by: CEVDX
line E *** INVALID OPERAND ON END STATE.
POINT FOR MODUlE.
NO ENTRY
Explanation: The operand of an END statement
cannot be analyzed.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled with binary text of entry
adcon set to zero.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVEP
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line E * •• INVALID OPERAND ON END STATEMENT.
ENTRY POINT FOR MODULE.
NO
Explanation: Message is produced if the
operand of an END statement is an absolute
expression or a literal.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVND
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
General Messages
479
line E *** INVALID OR MISSING NAME FIELD IN DXD
STATEMENT
Explanation: There was either an invalid
symbol in the name field of a DXD statement,
or the name field was omitted.
line -- seven-digit line number of source
statement in question.
System Default Action: The assembler will
treat the statement as a comment.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVXD
Variable data supplied by:
N/A
Message residence:
CEVDX
Message issued by: CEVDX
line E
***
symbol INVALID SUBSCRIPT VALUE
Explanation: A relocatable term is used as a
subscript. Variable portion will contain
the term.
L
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled, but an error indicator
will be set for subsequent processing.
Reference Data (Also see Appendix B-1S.)
Requirement determined by: CEVEV
Variable data supplied by: CEVEV
Message residence:
CEVDX
Message issued by: CEVDX
2. Explanation:
The subscript value of a SETX
instruction is 0, is greater than 255, or is
greater than a previously declared maximum.
Variable portion will be blank.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be made commentary. Assembly will
continue with next statement.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVSE
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by:
CEVDX
3. Explanation: A subscript value is not absolute
or, if absolute, is not greater than zero.
Variable portion will contain the subscript.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVSS
Variable data supplied by: CEVSS
Message residence:
CEVDX
Message issued by:
CEVDX
line E
***
line E
***
symbol INVALID SYMBOLIC PARAMETER
1. Explanation: A symbolic parameter has not been
previously defined. Variable portion will
contain the parameter.
line -- seven-digit line number of source
statement in question.
system Default Action: Associated input line
will be assembled, but an error indicator
will be set for subsequent processipg.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVEV
Variable data supplied by:
CEVEV
Message residence: CEVDX
Message issued by: CEVDX
2. Explanation: The name field in the prototype
statement associated with the macro
instruction has been examined. the symbolic
parameter was either longer than eight
characters or contained an illegal
character.
line -- seven-digit line number of source
statement in question.
System Default Action: The symbolic parameter
will be truncated to eight characters or
left in its illegal form and the assembly
will continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVPM
Variable data supplied by: CEVPM
Message residence:
CEVDX
Message issued by: CEVDX
3. Explanation: Message is produced if a symbolic
parameter has not been previously defined.
Variable portion will contain the symbolic
parameter.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVSS
Variable data supplied by: CEVSS
Message residence: CEVDX
Message issued by:
CEVDX
line E
***
INVALID TYPE SUBFIELD
Explanation: The type subfield of a constant
is not c, X, B, F, H, E. D, P, Z, A, V. R,
S, or Y.
INVALID SUBSTRING NOTATION
Explanation: Message is produced if an
improper delimiter occurs during string
substi t uti on.
line -- seven-digit line number of source
statement in question.
system Default Action: Associated input line
480
will be assembled.
Reference Data (Also see Appendix B-1S.)
Requirement determined by: CEVSS
Variable data supplied by: N/A
Message residence:
CEVDX
Message issued by: CEVDX
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled, but an error indicator
will be set for subsequent processing.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCS
Variable data supplied by:
N/A
Message residence:
Message issued by:
CEVDX
CEVDX
line E ••• INVERTED CHARACTER RANGE
Explanation: A character range specification
in an IMPLICIT statement has not been
specified in increasing alphabetical order.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBN
Variable data supplied by: N/A
Message residence:
CEKCA
Message issued by: CEKTH
line
E...
line -- seven-digit line number of source
statement in question.
system Default Action:
Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAI
Variable data supplied by: CEKCA
Message residence:
CEKCA
Message issued by: CEKTH
name IS A FORMAL ARGUMENT
Explanation:
In a subprogram, a format
argument name appears in an EQUIVALENCE
statement or is presented in a Namelist name
in a NAMELIST statement.
name -- An alphameric name from the source
program.
line -- seven-digit line number of source
statement in question.
System Default Action:
Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAY
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
line
E...
2. Explanation: A name appearing in a TYPE
statement is of a kind for which typing is
not appropriate.
name -- An alphameric name from the source
program.
name IS A COMMON BLOCK NAME
name -- An alphameric name from the source
program.
E...
line -- seven-digit line number of source
statement in question.
System Default Action:
Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
ReqUirement determined by: CEKAI
Variable data supplied by: CEKCA
Message residence: CEKCA
~rSsage issued by:
CEKTH
classname -- INTRINSIC FUNCTION, NAMELIST,
ENTRY POINT, or STATEMENT FUNCTION ARGUMENT
Explanation: A common block name has been used
as a variable in an expression. A common
block is used as a function name in an
expression.
line
INTRINSIC FUNCTION, NAMELIST, ENTRY POINT,
FUNCTION PROGRAM NAME, or MODULE NAME.
name IS CLASSIFIED AS classname
1. Explanation: A name has been used in an
expression or CALL statement in a context
inappropriate for its class.
name -- An alphameric name from the source
program.
classname -- UNDIMENSIONED VARIABLE, ARRAY,
STATEMENT FUNCTION, EXTERNAL SUBPROGRAM,
line -- seven-digit line number of source
statement in question.
Syste~ Default Action:
Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAS
Variable data supplied by:
CEKCA
Message residence: CEKCA
Message issued by: CEKTH
3. Explanation: In a COMMON statement, a name is
specified as a block name which has already
been classified as being known externally.
A conflict in external usage could result.
name -- An alphameric name from the source
program.
classname -- EXTERNAL SUBPROGRAM, LIBRARY
SUBPROGRAM, NAMELIST, ENTRY POINT, INTRINSIC
FUNCTION, FUNCTION PROGRAM NAME, or MODULE
NAME
line -- seven-digit line number of source
statement in question.
System Default Action:
Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by:
CEKAV
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
4. Explanation: In a NAMELIST statement, a name
presented as a Namelist name has already had
a conflicting usage in the program.
name -- An alphameric name from the source
program.
classname -- UNDIMENSIONED VARIABLE, ARRAY,
STATEMENT FUNCTION. EXTERNAL SUBPROGRAM,
INTRINSIC FUNCTION, ENTRY POINT, FUNCTION
PROGRAM NAME, or MODULE NAME
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBH
Variable data supplied by: CEKCA
General Messages
481
Message residence:
Message issued by:
CEKCA
CEKTB
5. Explanation: A name appearing as an I/O list
element is not a variable name, or a name
which has not been dimensioned appears with
a subscript.
name -- An alphameric name from the source
program.
classname -- STATEMENT FUNCTION, EXTERNAL
SUBPROGRAM, INTRINSIC FUNCTION, NAMELIST,
ENTRY POINT, MODULE NAME, or UNDIMENSIONED
VARIABLE
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBW
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
6. Explanation: A name specified as either a
variable FORMAT or a name list in an I/O
statement is not classified appropriately.
name -- An alphameric name from the source
program.
classname -- STATEMENT FUNCTION, EXTERNAL
SUBPROGRAM, INTRINSIC FUNCTION, ENTRY POINT,
or MODULE NAME
line -- seven-digit line number of source
statement in question.
System Default Action:
Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKCF
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
7. Explanation:
The name used for the controlled
variable or as a loop-limit or step in a DO
statement or I/O loop is not a variable
name.
name -- An alphameric name from the source
program.
classname -- STATEMENT FUNCTION, EXTERNAL
SUBPROGRAM, INTRINSIC FUNCTION, NAMELIST,
ENTRY POINT, or MODULE NAME
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKEA or CEKCJ
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
8. Explanation: The name specified in an ASSIGN
statement is not a variable name.
name -- An alphameric name from the source
program.
482
class name -- STATEMENT FUNCTION, EXTERNAL
SUBPROGRAM, INTRINSIC FUNCTION, NA~~LIST,
ENTRY POINT, or MODULE NAME
line -- seven-digit line number of source
statement in question.
system Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBC
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
9. Explanation: The name presented as a variable
data set number in a BACKSPACE, REWIND, or
END FILE statement is not a variable name.
name -- An alphameTic nawe from the source
program.
classname -- STATEMENT FUNTION, EXTERNAL
SUBPROGRAM, INTRINSIC FUNCTION, NAMELIST,
ENTRY POINT or MODULE NAME.
line -- seven-digit line number of source
statement in question.
System Default Action:
Ignore the stateroent
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBD
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTB
10.Explanation: In a READ or WRITE statement, the
name given as a data set reference number
specification is not a variable name.
name -- An alphameric nalre frolT the source
frogram.
classname -- STATEMENT FUNCTION, EXTERNAL
SUBPROGRAM, INTRINSIC FUNCTION, NAMELIST,
ENTRY POINT, or MODULE NAME.
line -- seven-digit line number of source
statement in question.
System Default Action:
Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKEE
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
11. Explanation: In an assigned or computed GO TO,
an alphameric name is used which is not a
variable name.
name -- An alphameric name frolT' the source
program.
class name -- STATEMENT FUNCTION, EXTERNAL
SUBPROGRAM, INTRINSIC FUNCTION, NAMELIST,
ENTRY POINT, or MODULE NAME.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAO
Variable data supplied by: CEKCA
Message residence:
Message issued by:
line E *** ISD OF OUTPUT MODULE EXCEEDS AVAILABLE
VIRTUAL MEMORY. CANNOT CONTINUE.
CEKCA
CEKTH
12. Explanation: A name which has been specified
in an equivalence group is not a variable
name.
name -- An alphameric name from the source
program.
classname -- STATEMENT FUNCTION, EXTERNAL
SUBPROGRAM, INTRINSIC FUNCTION, NAMELIST,
ENTRY POINT, or MODULE NAME.
line -- seven-digit line number of source
statement in question.
System Default Action:
Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAY or CEKBG
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
line E *** ISD FILE OVERFLOWEE.
Explanation: The size of the ISD of the
present output module has exceeded available
virtual memory.
line -- seven-digit line number of source
statement in question.
Conversational Action
User:
Restart linkage editor operation,
placing the END statement ahead of the
point where storage was exceeded.
system: Linkage editor processing is
terminated.
Nonconversational Action
User: N/A
System:
Linkage editor processing is
terminated.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEYBR
Variable data supplied by: N/A
Message residence: MSGDIA
Message issued by: CEYER
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
ISD NOT PRODUCED.
line E *** ISOLATED DECIMAL POINT
Explanation: Insufficient working storage is
available for the assembler's requirement
for constructing the Internal Symbol
Dictionary.
Explanation: A decimal point occurs other than
in a real or logical constant or a
relational or logical operator.
line -- seven-digit line number of source
statement in question.
System Default Action: Assembly continues
without producing an ISD.
Reference Data {Also see Appendix B-15.}
Requirement determined by: CEVSD
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVEX
line -- seven-digit line number of source
statement in question.
System Default Action:
Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAE
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E *** ISD OF MODULE name EXCEEDS AVAILABLE
VIRTUAL MEMORY. CANNOT CONTINUE.
Explanation: The size of the ISD of the
current input Ifrodule has exceeded the
available virtual memory.
name
module name.
line
seven-digit line number of source
statement in question.
Conversational Action
User: Restart the linkage editor operation,
omitting the offending module from the
control statements.
System: Linkage editor processing is
terminated.
Nonconversational Action
User:
N/A
System: Linkage editor proceSSing is
terminated.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEYBR
Variable data supplied by: CEYBR
Message residence: MSGEIA
Message issued by: CEYER
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
line E *** LENGTH FIELD EXCEEDS 4
Explanation: The L2 field is greater than 4 in
an SLT instruction.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled; the L2 field in the
binary text will be reset to O.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVMO
Variable data supplied by: N/A
Message residence:
CEVDX
Message issued by: CEVDX
line E *** LENGTH OF DIVISOR TOO LARGE
Explanation: The length of the divisor (second
operand) in a DP instruction was greater
than 7 or larger than or equal to the length
of the dividend (the first operand).
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled; length field of the
divisor in binary text will be reset to 0 or
General Messages
483
maximum.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVMO
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line E
***
LENGTH OF MULTIPLIER TOO LARGE.
Explanation: The length of the multiplier (the
second operand) in the MP instruction was
larger than 7, or larger than or equal to
the length of the multiplicand (the first
operand) .
line -- seven-digit line numher of source
statement in question.
System Default Action: Associated input line
will be assembled; length field of
multiplier in binary text will be reset to
zero or maximum.
Reference Data (Also see A~pendix B-15.)
Requirement determined by: CEVMO
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line E
***
line -- seven-digit line number of source
statement in question.
System Default Action:
Ignore the statement
and continue.
Reference Data (Also see A~pendix B-15.)
Requirement determined by: CEKBN
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
***
LETTERS 'TO' NOT FOUND WEERE REQUIRED
name
CHCIW2 or CHCIW3
line
seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBG
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
line E *** LOCATION COUNTER EXCEEDS MAXIMUM
SEGMENT ADDRESS
Explanation: The location counter for one of
the control sections has exceeded 22~-1;
further processing is aborted.
line -- seven-digit line number of source
statement in question.
System Default Action: All subsequent in~ut
statements will be made commentary except
the END statement.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVPC
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line E
***
LOGICAL EXPRESSION IMPROPERLY FORMED
Explanation: The keyword TO does not follow
the statement number in an ASSIGN statement.
Explanation: A syntactical error is
encountered in a logical expression.
line -- seven-digit line number of source
statement in question.
System Default Action:
Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBC
Variable data supplied by: N/A
Message residence:
CEKCA
Message issued by:
CEKTH
line -- seven-digit line number of source
statement in question.
Systel[, Default Action: Associated input line
will be assembled but an error flag will be
set for subsequent processing.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVEV
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line E *** LIBRARY ENTRY NAME name BAS A
CONFLICTING USAGE
1. Explanation: An entry name for a library I/O
routine has already been used in the source
program for other purposes.
name
CHCIA, CHCIA1, CHCIE1, or CECIU1.
line
seven-digit line number of source
statement in question.
System Default Action:
Ignore the statement
and continue.
484
2. Explanation: An entry name for the library
PAUSE or STOP routine has been used in this
program for another purpose. The PAUSE,
STOP, or RETURN (in a main program)
statement cannot be compiled.
LETTER NOT FOUND WHERE REQUIRED
Explanation:
In an IMPLICIT statement, an
attempt is made to assign a type to a
character other than A through Z or $.
line E
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBD, CEKBE, or
CEKBN
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
line E
***
LOGICAL IF AFTER LOGICAL IF
Explanation: A logical IF statement appears as
the consequent of another logical IF.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKAR
Variahle data supplied by: N/A
Message residence:
Message issued by:
CEKCA
CEKTH
Message residence:
Message issued by:
line E *** LOOP IN I/O LIST MUST BE ENCLOSED IN
PARENTHESES
Explanation: An equal sign appears in an I/O
list at zero parenthesis level.
line -- seven-digit line number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEKBW
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line E *** MAXIMUM NO.
EXCEEDED
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be made commentary. Assembly will
continue with next statement.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVCT
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
OF LTORGS EXCEEDED
Explanation: More than 253 LTORG statements
are encountered.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be made commentary. Assembly will
continue with next statement.
Reference Data (Also see Appendix B-15.)
Requirement determined by: CEVLG
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line E *** MAY NOT BE A CONTINUATION LINE.
IGNORED.
line E *** symbol MISSING SUBSCRIPT
1. Explanation: A subscript is missing from a
syn or, if
he is certain the device address he typed
in response to ENTER ADDRESS OF PAGING
DEVICE is not that of the IPL volume, he
must change the volume 10 on the paging
volume.
System: If expected response is received,
processing continues; if not, system
waits. If device cannot be accessed,
General Messages
507
message CANNOT ACCESS DEVICE will appear.
If it can be accessed and is VAM
formatted, previous contents of the disk
will probably be destroyed. If the
device can be accessed and is not VAM
formatted, message PRIMARY PAGING VOLUME
IMPROPERLY FORMATTED, FORMAT VOLUME AND
THEN IPL will appear.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: N/A
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: operator's Terminal
Transmittal technique: Own I/O routine
ENTER ADDRESS OF PAGING DEVICE.
AVAILABLE
NO PAGING DRUMS
Explanation: There is no drum in the system
partition, or the drum is not ready.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: If drum is intended as the primary
paging device, operator must correct the
configuration switches or ready the drum.
The device address of the primary paging
device must then be entered as cuu or
ccuu, where c or cc is the hexadecimal
representation of channel controller and
channel and uu is the hexadecimal
representation of the control unit and
device.
System: If the device cannot be accessed,
message CANNOT ACCESS DEVICE will appear.
If it can be accessed and is VAM
formatted, it will be used for paging and
previous contents of the disk will
probably be overlaid.
If device can be
accessed and is not VAM formatted,
message PRIMARY PAGING VOLUME IMPROPERLY
FORMATTED, FORMAT VOLUME AND THEN IPL
will appear.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: N/A
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: Own I/O routine
ENTER ADDRESS OF PAGING DISK
Explanation: At the operator's terminal, the
user must enter 2311 or 2314 disk drive
address for the disk storage device to be
used for private IVM paging.
Conversational Action
User: See explanation.
System: N/A
Nonconversational Action
User:
N/A
System: N/A
Reference Data
Requirement determined by: CElAA
Variable data supplied by: N/A
Message residence: CEIAA
508
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: Own I/O routine
ENTER DEVICE ADDRESS AND DATA SET SPECIFICATION
Explanation:
the form
xxxx
Operator must enter a message of
{ dSname}
ALL
where xxxx is the four-character hardware
address of the device on which the delta
data set volume has been mounted prior to
running Startup. ALL indicates that all
appropriately qualified delta data sets on
the volume are to be searched prior be the
system data sets; dsname specifies the data
set name (either fully or partially
qualified) of a delta data set that is to be
searched prior to the system data sets.
Data set names must be of the form specified
in the description of LAUD in IBM System/360
Time Sharing System: System Generation and
Maintenance, GC28-2010.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: Specified above.
System: Waits for proper response and then
continues.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: N/A
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: operator's Terminal
Transmittal technique: Own I/O routine
ENTER PHY ADDRESS OF CARD RDR OR DEFAULT = EOE
Explanation: If input to startup is to be in
card form, the operator should enter the
physical address of the card reader. If the
information is to be supplied at the
operator's terminal, the operator should
press EOE.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: If the card reader is to be used, the
operator must place the cards in the
reader and press -start.System:
System Default Action: If the message is
defaulted, the operator will be prompted for
the required information at the operator's
terminal and the operator will respond
conversationally.
Reference Data
Requirement determined by: CElAA
Variable data supplied by: System operator
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: Operator's terminal
Nonconversational: N/A
Transmittal technique: OWn I/O routine.
ENTER SERIAL NO.
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: operator's Terminal
Transmittal technique: Own I/O routine
OF VOL.
Explanation: Volume serial number not
specified. This message is issued to
operator.
Conversational Action
User: Operator enters volume serial number.
System: Task waits.
Nonconversational Action
User: Operator enters volume serial number.
System: Task waits.
Reference Data
Requirement determined by: CZCAC
Variable data supplied by: N/A
Message residence: CZCAC
Message issued by: CZCAC
Destination
Conversational: operator's Terminal
Nonconversational: Operator's Terminal
Transmittal technique: VSEND Macro
ENTER TWO CHARACTERS FOR EACH SE IN FORM
IXN,XN, ••• 1
X=SE ID (A,B, ••• )
N=FSA CODE to,l,...
FOR O/256K,256lV512K, ••• )
Explanation: This message is produced on each
initial loading of a Simplex (model 1) CPU.
It is necessary for Startup to know which
floating storage addresses (FSAS) are
aSSigned to which storage elements (SES),
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: The operator should enter the correct
FSA code for each SE in the system, in
the form specified.
System: If expected response is received,
processing continues; otherwise, system
waits.
However, if an incorrect response
is received, see message INCORRECT
RESPONSE or message DUPLICATE FSAs ..•
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: N/A
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmi ttal technique: OWn I/O routine
ENTER 55 WHEN READY
Explanation: This message is produced if an
incorrect response was given when a 55 was
expected, or in conjunction with the message
"INTERVENTION REQUIRED ON CCUU."
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: Press the ·5" key on the operat.or's
terminal twice.
System: Sys·tem waits for correct response,
and then continues processing.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: N/A
$$ • • • ENTRY POINT epname IN MODULE mname+l
DUPLICATES A CSECT NAME IN MODULE mname+2
Expianation: A CSECT of name Wepname" is
already loaded for this task as part of
-mname+2." Now the loader is loading
"nmame+1W that contains some DEF, other than
a CSECT NAME DEF, whose name is identical
with the previously loaded CSECT name. The
second occurrence is ignored; all references
are tied to the first occurrences. This
condition caused a load error indication by
the loader.
Conversational Action
User: N/A
System: Continue.
Nonconversational Action
User: N/A
System: Continue.
Reference Data
Requirement determined by: CZCDL
Variable data supplied by: CZCDL
Message residence: CZCDL
Message issued by: CZCDL
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATE
ENTRY POINT epname IN MODULE mname+l
DUPLICATES AN ENTRY POINT NAME IN MODULE mname+2
$$.$.
Explanation: A module, -mname+l,- is already
loaded and contains some entry point,
-epname,· other than a CSECT name. New
-mname+2- is loaded that also contains an
entry point, -epname,· other than a CSECT
nane. The second occurrence is ignored; all
references are tied to the first occurrence.
This condition did not cause a load error
indication by the loader.
Conversational Action
User:
N/A
System: Continue.
Nonconversational Action
User: N/A
System: Continue.
Reference Data
Requirement determined by: CZCDL
Variable data supplied by: CZCDL
~essage residence:
CZCDL
Message issued by: CZCDL
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATE
**$ •• ENTRY POINT epname IN MODULE mname IS AN
ILLEGAL NAME
Explanation: While loading -mname,· -epname"
is discovered to be of improper form, i.e.,
either:
(1) User Authority = U and
a. SYS symbol found in nonsysten.
General Messages
509
CSECT, or
CZ or CBB symbol found in
nonprivileged system CSECT, or
c. a name other than CZ or CBB
found in privileged system
CSECT, or
(2) User Authority = P and CZ or CBB
symbol found in module loaded from
library other than SYSLIB.
This entry point cannot be referenced by the
user. Variable fields are self-explanatory.
This condition did not cause a load error
indication by the loader.
Conversational Action
User: N/A
System: Continue.
Nonconversational Action
User: N/A
System: Continue.
Reference Data
Requirement determined by: CZCDL
Variable data supplied by: CZCDL
Message residence: CZCDL
Message issued by: CZCDL
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATE
b.
ERR. CONDITIONS ENCOUNTERED MOUNTING SUCCESSIVE
VOLS.
Explanation: This error may occur if there is
more than one volume to be cataloged. The
BUMP (CZCAB) routine is called to mount
successive volumes after the first, and it
has returned to CATVAM with an error.
Conversational Action
User: There may be problems with additional
vols. - user discretion.
System: Processing continues.
Nonconversational Action
User: Task deleted.
system: Processing continues.
System Default Action: Terminate compilation.
Reference Data
Requirement determined by: CZCFBl
Variable data supplied by: N/A
Message residence: CZCFBP
Message issued by: GATE (CZAAB)
Destination
Conversational: User's terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATWR (by meaITS of a
call to the LPC PUTDIAG entry, if in
conversational mode).
ERR-USER ID REQUESTED IS NOT IN POD-(NOT JOINED
SYS. )
ERASE FAILURE.
FQN=userid.data set name
Explanation: READ CARDS has encountered an
error while processing a SYSIN data set or
VAM data set and the data set cannot be
erased. The variable data in the message is
the userid of the data set owner and the
fully qualified name (a maximum of 35
characters) of the data set.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: If the error occurred while
processing a DATASET card deck, re-submit
the deck after changing the name of the
data set specified in the DATASET card.
System: Processing continues.
Reference Data
Requirement determined by: CZAWA
Variable data supplied by: CZAWA
Message residence: CZAWA
Message issued by: CZAWA
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: WTO Macro
ERASE PENDING
Explanation: There is a background task,
active or pending, whiCh, as a part of its
operation, will erase the data set.
System Default Action:
processing continues.
Reference Data
Requirement determined by: CZAELl
Variable data supplied by: CZAELl
Message residence: CZAELl
Message issued by: CZAELl
Destination
Conversational: User's terminal
Nonconversational: Task's SYSOUT
Transmittal technique: GATE
510
Explanation: The USERID option requested is
invalid. The user table has been checked
and the ID is not included.
Conversational Action
User: Must arrange to be joined under this
userid or must LOGON with another, valid
userid.
System: Continues processing.
Nonconversational Action
User: Task deleted.
System: Continues processing.
Reference Data
Requirement determined by: CZCFBl
Variable data supplied by: N/A
Message residence: CZCFBP
Message issued by: GATE
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATWR, by means of a
CAL.L to the LPC PUTDIAG entry.
ERROR ENCOUNTERED PROCESSING (XXXXXXXX), ON
VSN(XXXXXX>, DATA SET WILL BE IGNORED, PROGRAM
WILL CONTINUE.
Explanation: It is found that an -E w DSCB read
in has a bad check sum. The DSNAME of data
set and Vol. Ser. number will be inserted
into message. The data set will be ignored.
program will continue search for next data
set.
Conversational Action
User: Up to user's discretion to fix later
(data set is ignored on this run).
System: Processing continues.
Nonconversational Action
User: Task deleted.
System: Processing continues.
System Default Action: Terminate compilation
Reference Data
Requirement determined by: CZCFBl
Variable data supplied by: NlA
Message residence: CZCFBP
Message issued by: GATE (CZAAB)
Destination
Conversational: User's terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATWR (by means of a
call to the LPC PUTDIAG entry, if in
conversational mode).
XXXXXX - ERROR IN MOUNTING VOLUME.
CANCELLED.
REQUEST
Explanation: Processing is terminated if one
of the volumes cannot be found or mounted
successfully.
Conversational Action
User: Try to correct and reenter command.
Reference Data (See Appendix B-27.)
ESAOOA EC VOL volid
Explanation: An attempt has been made to
obtain a DSCB. The return code from
subroutine OBTAIN indicates a hardware error
in attempting to read the volume. The
subroutine terminates with a return code
indicating the request cannot be met.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.>
Requirement determined by: CZCEC
Variable data supplied by: CHASDA
Message residence: CZCEC
ESAOOD EE VOL volid
Explanation: An attempt to obtain (type 3) a
DSCB has resulted in an error code,
indicating DSCB not found or end-of-file
mark encountered.
processing continues.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEE
Variable data supplied by: CHASDA
Message residence: CZCEE
ESA01D
EC
volid -- volume id obtained from symbolic
device allocation table (SDAT).
ConVersational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEC
Variable data supplied by: CHASDA
Message residence: CZCEC
VOL volid
Explanation: An attempt has been made to
retain a DSCB. Return code from subroutine
RETAIN indicates a hardware error in
attempting to write the volume. The
subroutine terminates with a return code
indicating the request cannot be met.
ESA01D EE VOL valid
Explanation: An attempt to obtain an available
DSCB has resulted in an error code,
indicating DSCB not found or end-of-file
mark encountered. Processing continues.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by:
CZCEE
Variable data supplied by: CHASDA
Message residence: CZCEE
ESA01D ES VOL volid DSNAME dsname
Explanation: An attempt to obtain a DSCB has
resulted in a hardware error. Error flags
are set in the JFCB. processing continues.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System:
N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCES
Variable data supplied by: CHASDA
Message residence: CZCES
ESAOID EX VOL volid
Explanation: An attempt to retain a format-l
or format-A DSCB has resulted in a hardware
error.
Processing continues.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEX
Variable data supplied by: CHASDA
Message residence: CZCEX
General Messages
511
ESA01D FZ VOL volid DSNAME dsname
EXplanation: Issued when return code from
subroutine RETAIN indicates a write-error
was encountered in attempting to write a
DSCB.
(volid) is obtained from SDA.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.>
Requirement determined by: CZCFZ
Variable data supplied by: CHASDA
Message residence: CZCFZ
ESA02D EE VOL volid
Explanation: An attempt to obtain (TYPE 0) a
OSCB has resulted in a hardware error.
valid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see AFpendix B-16.)
Requirement determined by: CZCEE
Variable data supplied by: CHASDA
Message residence:
CZCEE
ESA02D EG VOL volid DSNAME dsname
Explanation: An attempt to obtain a format-l
DSCB has resulted in a return code
indicating hardware error, or end-of-file
mark encountered. Return is made to caller
with error code X'OS'.
volid -- volume id obtained from symbolic
device allocation table (SOAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEG
Variable data supplied by: CHASDA-CHATDT
Message residence: CZCEG
ESA02D ES VOL volid DSNAME dsname
Explanation: An attempt to retain a DSCB has
resulted in a hardware error. Error flags
are set in the JFCB. Processing continues.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
512
System: N/A
Reference Data (Also see Appendix B-16.>
Requirement determined by: CZCES
Variable data supplied by: CHASDA
Message residence: CZCES
ESA02D EX VOL volid
Explanation: An attempt to obtain a
continuation DSCB has resulted in a hardware
error. Processing continues.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEX
Variable data supplied by: CHASDA
Message residence: CZCEX
ESA03A EX VOL volid DSNAME dsname
Explanation: An attempt to obtain available
DSCBs has resulted in a hardware error.
Processing continues.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System:
N/A
Reference Data (Also see Appendix B-16.>
Requirement determined by: CZCEX
Variable data supplied by: CHASDA-CHATDT
Message residence: CZCEX
ESA03D BE VOL volid
Explanation: An attempt to obtain (TYPE3) a
DSCB has resulted in a hardware error.
Processing continues.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.>
Requirement determined by: CZCEE
Variable data supplied by: CBASDA
Message residence: CZCEE
ESA03D EG VOL volid
Explanation: An attempt to obtain a format-3
DSCB has resulted in an error code
indicating hardware error, or end-of-file
mark encountered. Return is made to caller
with error code X'OS'.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEG
Variable data supplied by: CHASDA
Message residence: CZCEG
ESA03D ES VOL volid DSNAME dsname
Explanation: The DSCB if flagged is chained.
However, the number of data set extents is
exhausted. Error flags are set in the JFCB.
Processing continues.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCES
Variable data supplied by: CHASDA
Message residence: CZCES
ESA04D EE VOL valid
Explanation: An attempt to retain a zero DSCB
resulted in a write error. Processing
continues.
valid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEE
Variable data supplied by: CHASDA
Message residence: CZCEE
ESA04D EG VOL volid
Explanation: An attempt to retain a format-3
DSCB has resulted in a hardware error. Task
terminates abnormally.
valid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEG
Variable data supplied by: CBASDA
Message residence: CZCEG
ESA04D EX VOL volid
Explanation: An attempt to obtain a DSCB on a
new volume has resulted in a hardware error.
processing continues.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEX
Variable data SUpplied by: CHASDA
Message residence: CZCEX
ESAOSD EA VOL volid
Explanation: An attempt to obtain available
DSCBs is unsuccessful due to a hardware
error.
If the volume is private, a return
code of X'OS' is returned to the caller,
indicating unrecoverable I/O error.
If the
volume is publiC, the next table entry is
examined.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEA
Variable data supplied by: CHASDA
Message residence: CZCEA
ESA05D EE VOL volid
Explanation: An attempt to retain an empty
CAESM DSCB resulted in a write error.
Processing continues.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEE
Variable data supplied by: CHASDA
Message residence: CZCEE
ESA05D EG VOL volid
Explanation: An attempt to retain a format-l
DSCB has resulted in a hardware error. Task
terminates a£normally.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
ConVersational Action
User: N/A
System: N/A
General Messages
513
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEG
Variable data supplied by: CHASDA
Message residence: CZCEG
ESA05D EV VOL volid
Explanation: An attempt has been made to
obtain a zero DSCB. Return code indicates a
hardware error occurred. Task terminates
abnormally.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see AFpendix B-16.)
Requirement determined by: CZCEV
Variable data supplied by: CHASDA
Message residence: CZCEV
ESA06A EG VOL volid
Explanation: An attempt to retain a VTOC DSCB
has resulted in a hardware error.
Processing continues.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEG
Variable data supplied by: CHASDA
Message residence: CZCEG
ESA06A EX VOL volid DSNAME dsname
Explanation: An attempt to retain a new DSCB
has resulted in a write error. Processing
continues.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEX
Variable data supplied by: CHASDA-CHATDT
Message residence:
CZCEX
ESA06D EA VOL volid DSNAME dsname
Explanation: An attempt to retain a DSCB has
encountered a write error.
If the volume is
private. a return code of X'OS' is returned
514
to the caller indicating unrecoverable I/O
error.
If the volume is public. the next
table entry is examined.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEA
Variable data supplied by: CHASDA-CHATDT
Message residence: CZCEA
ESA07A EX VOL volid
Explanation: An attempt to retain the VTOC
DSCB has resulted in a write error.
Processing continues.
volid -- volume id obtained from syml::lolic
device allocation table (SDAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System:
N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEX
Variable data supplied by: CHASDA
Message residence: CZCEX
ESA07D EG VOL volid
Explanation: An attempt to retain a format-O
DSCB has resulted in a hardware error.
Processing continues.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix £-16.)
Requirement determined by: CZCEG
Variable data supplied by: CHASDA
Message residence: CZCEG
ESAIAD EC VOL volid
Explanation:
attempting
sutroutine
indicating
A DSCB record was not found in
to obtain an available DSCB. The
terminates ~ith return code
the request cannot be met.
valid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User:
N/A
System: N/A
Ncnconversaticnal Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEC
Variable data supplied by:
Message residence: CZCEC
CHASDA
ESAlOD EE VOL volid
Explanation: In checking the extents provided
by the parameter list an extent overlap is
detected. Processing continues.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEE
Variable data supplied by: CHASDA
Message residence: CZCEE
end-of-file mark encountered.
continues.
Processing
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEX
Variable data supplied by: CHASDA
Message residence: CZCEX
ESA13D EC VOL volid
Explanation: The number of extents deleted
from the input DSCBs exceeds the current
specification. This subroutine will return
to its caller with a return code indicating
that the request cannot be met on this
volume.
ESA11D EE VOL volid
Explanation: An error has been detected in the
DADSM hole count. Processing continues.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEE
Variable data supplied by: CHASDA
M.essage residence: CZCEE
ESA12D EC VOL volid
Explanation: An attempt has been made to
obtain a DSCB. The subroutine OBTAIN return
code is invalid, or indicates that the DSCB
record was not found or an end-of-file mark
was encountered. This subroutine will
return to its caller with a return code set
indicating that the request cannot be met on
this volume.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEC
Variable data supplied by: CHASDA
Message residence: CZCEC
Transmittal technique: WTP Macro
ESA12D EX VOL volid
Explanation: An attempt to obtain a
continuation DSCB has resulted in an error
code indicating DSCB not found or
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEC
Variable data supplied by: CHASDA
Message residence: CZCEC
ESA14D EC VOL volid
Explanation: The relative track address of the
extent indicated by the DSCB that has been
obtained exceeds that of the original
relative track address, indicating that the
required extent has been bypassed. This
subroutine will terminate with a return code
indicating that the request cannot be met on
this volume.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEC
Variable data supplied by: CHASDA
Message residence: CZCEC
ESA15D EC VOL volid
Explanation: No more extents are indicated in
the input DSCB, while update entries are
still indicated to be processed. The
subroutine will terminate with a return code
indicating the request cannot be met.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
General Messages
515
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEC
Variable data supplied by: CHASDA
Message residence: CZCEC
ESA16D EC VOL volid
Explanation: The number of extents required
caused more than one output DSCB to be
created from the same input DSCB. The
subroutine will terminate with return code
indicating the request cannot be satisfied.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.l
Requirement determined by: CZCEC
Variable data supplied by: CHASDA
Message residence: CZCEC
ESA17D FC VOL volid
Explanation: An attempt has been made to
retain a DSCB. The subroutine RETAIN return
code is invalid. The subroutine will
terminate with a return code indicating the
request cannot be met.
ESA19D EC VOL volid
Explanation: A DSCB has heen obtained which
contains no extents. The subroutine
terminates with a return code indicating the
request cannot be met.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User:
N/A
b"7stem: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEC
Variable data supplied by: CHASDA
Message residence: CZCEC
ESA20D EE VOL volid
Explanation: Before attempting to obtain a
DSCE the VTOC hole count is detected to be
zero.
Processing continues.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User:
N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEE
Variable data supplied by: CHASDA
Message residence: CZCEE
ESA23A EX VOL valid DSNAME dsname
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEC
Variable data supplied by: CHASDA
Message residence: CZCEC
ESA18D EC VOL volid
Explanation: A hole has been found between
valid DSCB extents. The subroutine will
terminate with a return code indicating the
request cannot be met.
Explanation: An attempt to obtain available
DSCBs has resulted in an error code
indicating DSCB not found or end-of-file
mark encountered. Processing continues.
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Ccnversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEX
Variable data supplied by: CHASDA or CHATDT
Message residence: CZCEX
ESA24D EX VOL valid
volid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEC
Variable data supplied by: CHASDA
Message residence: CZCEC
516
Explanation: An attempt to obtain a DSCB on a
new volume has resulted in an error return
indicating DSCB not found or end-of-file
mark encountered. Processing continues.
valid -- volume id obtained from symbolic
device allocation table (SDAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEX
Variable data supplied by: CHASDA
Message residence: CZCEX
ESA25D EA VOL volid
Explanation: An attempt to obtain available
DSCBs is unsuccessful due to DSCB not found
or end-of-file mark encountered. If the
volume is private, a return code of X'08' is
returned to the caller indicating an
unrecoverable I/O error. If the volume is
public, the next table entry is examined.
volid -- volume id obtained from symbolic
device allocation table (SOAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data (Also see Appendix B-16.)
Requirement determined by: CZCEA
Variable data supplied by: CHASDA
Message residence: CZCEA
Explanation: A program interruption occurs
when an instruction given to the computer is
invalid or contains invalid addresses or
constants. Assembler Language programmers
will know what diagnostic action to take.
If you do not know what to do at this point,
you should at least enter the PCS command:
DISPLAY O:15R to obtain the contents of the
general registers and (if a floating point
interrupt is involved): DISPLAY 0:6D. This
information will aid someone familiar with
machine instructions. At the point of
program interruption, your program is
suspended and data sets may be open. The
best action for a non-assembler language
programmer is to issue the ABEND command,
which will close data sets and cause a new
task to be logged on. Experienced Assembler
Language programmers use PCS to dump areas
in storage to determine the cause of the
program interruption. For a discussion of
the meaning of program interruptions,
consult IBM System/360: Principles of
Operation, GA22-6821.
Filter Code: XSA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User:
N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
EOOA PROGRAM INTERRUPT 11 (DECIMAL DIVIDE)
VPSW=value
Explanation: A program interruption occurs
when an instruction given to the computer is
invalid or contains invalid addresses or
constants. Assembler Language programmers
will know what diagnostic action to take.
If you do not know what to do at this point,
you should at least enter the PCS command:
DISPLAY O:15R to obtain the contents of the
general registers and (if a floating point
interrupt is involved): DISPLAY 0:6D. This
information will aid someone familiar with
machine instructions. At the point of
program interruption, your program is
suspended and data sets may be open. The
best action for a non-assembler language
programmer is to issue the ABEND command,
which will close data sets and cause a new
task to be logged on. Experienced Assembler
Language programmers use PCS to dump areas
in storage to determine the cause of the
program interruption. For a discussion of
the meaning of program interruptions,
consult IBM System/360: Principles of
Operation, GA22-6821.
Filter Code: XSA
Conversational Action
User: N/A
System: control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
EOOB PROGRAM INTERRUPT 12 (EXpONENT OVERFLOW)
VPSW=value
EOOC PROGRAM INTERRUPT 13 (EXPONENT UNDERFLOW)
VPSW=value
Explanation: A program interruption occurs
when an instruction given to the computer is
invalid or contains invalid addresses or
constants. Assembler Language programmers
will know what diagnostic action to take.
If you do not know what to do at this point,
you should at least enter the PCS command:
DISPLAY O:15R to obtain the contents of the
general registers and (if a floating point
interrupt is involved): DISPLAY 0:6D. This
information will aid someone familiar with
machine instructions. At the point of
program interruption, your program is
suspended and data sets may be open. The
best action for a non-assembler language
programmer is to issue the ABEND command,
which will close data sets and cause a new
task to re logged on. Experienced Assembler
Language programmers use PCS to dump areas
in storage to determine the cause of the
Frogram interruption. For a diSCUSsion of
the meaning of program interruFtions,
consult IBM System/360: Principles of
Operation, GA22-6821.
Filter Code: XSA
Conversational Action
User:
N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
General Messages
517
EOOD PROGRAM INTERRUPT 14 (SIGNIFICANCE)
VPSW=value
Explanation: A program interruption occurs
when an instruction given to the computer is
invalid or contains invalid addresses or
constants. Assembler Language programmers
will know what diagnostic action to take.
If you do not know what to do at this point,
you should at least enter the PCS command:
DISPLAY O:15R to obtain the contents of the
general registers and (if a floating point
interrupt is involved): DISPLAY O:6D. This
information will aid someone familiar with
machine instructions. At the point of
program interruption, your program is
suspended and data sets may be open. The
best action for a non-assembler language
programmer is to issue the ABEND command,
which will close data sets and cause a new
task to be logged on. Experienced Assembler
Language programmers use PCS to dump areas
in storage to determine the cause of the
program interruption. For a discussion of
the meaning of program interruptions,
consult IBM Systeml360: PrinciFles of
Operation, GA22-6821.
Filter Code: XSA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
system: Task is abnormally terminated.
Reference Data (Also see Appendix B-1?)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
EOOE PROGRAM INTERRUPT 15 (FLOATING-POINT DIVIDE)
VPSW=value
Explanation: A program interruption occurs
when an instruction given to the computer is
invalid or contains invalid addresses or
constants. Assembler Language programmers
will know what diagnostic action to take.
If you do not know what to do at this point,
you should at least enter the PCS command:
DISPLAY O:15R to obtain the contents of the
general registers and (if a floating point
interrupt is involved): DISPLAY O:6D. This
information will aid someone familiar with
machine instructions. At the point of
program interruption, your program is
suspended and data sets may be open. The
best action for a non-assembler language
programmer is to issue the ABEND command,
which will close data sets and cause a new
task to be logged on. Experienced Assembler
Language programmers use PCS to dump areas
in storage to determine the cause of the
program interruption. For a discussion of
the meaning of program interruptions,
consult IBM System/360: Principles of
Operation (Order No. GA22-6821).
Filter Code: XSA
Conversational Action
User: N/A
System: control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-1?)
518
Requirement determined by:
Variable data supplied by:
CZAHA
CZAHA
EOOF SYSTEM FAULT:
EXTENDED PROGRAM INTERRUPT
(SOFTWARE GENERATED) VPSW=value
Explanation: An external signal interruption
causes an extended (simulated) program
interruption.
Filter Code: XSA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-1?)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
EOOO PROGRAM INTERRUPT 1 (OPERATION) VPSW=value
Explanation: A program interruption occu;s
when an instruction given to the computer is
invalid or contains invalid addresses or
constants. Assembler Language programmers
will know what diagnostic action to take.
If you do not know what to do at this point,
you should at least enter the PCS command:
DISPLAY O:15R to obtain the contents of the
general registers and (if a floating point
interrupt is involved): DISPLAY O:6D. This
information will aid someone familiar with
n,achine instructions. At the point of
program interruption, your program is
suspended and data sets may be open. The
best action for a non-assembler language
programmer is to issue the ABEND con~and,
which will close data sets and cause a new
task to be logged on. Experienced Assembler
Language programmers use PCS to dump areas
in storage to determine the cause of the
program interruption. For a discussion of
the meaning of program interruptions,
consult IBM System/360: Principles of
Operation, GA22-6821.
Filter Code: XSA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User:
N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-1?)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
EOOl PROGRAM INTERRUPT 2 (PRIVILEGED OPERATION)
VPSW=value
Explanation: A program interruption occurs
when an instruction given to the computer is
invalid or contains invalid addresses or
constants. Assembler Language prograEmers
will know what diagnostic action to take.
If you do not know what to do at this foint,
you should at least enter the PCS command:
DISPLAY O:lSR to obtain the contents of the
general registers and (if a floating point
interrUpt is involved): DISPLAY O:6D.
This
information will aid someone familiar with
machine instructions. At the point of
program interruption, your program is
suspended and data sets may be open. The
best action for a non-assembler language
programmer is to issue the ABEND command,
which will close data sets and cause a new
task to be logged on. Experienced Assembler
Language programmers use PCS to dump areas
in storage to determine the cause of the
program interruption. For a discussion of
the meaning of program interruptions,
consult IBM System/360: principles of
Operation, GA22-6821.
Filter Code: XSA
Conversational Action
User: N/A
System: control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
machine instructions. At the point of
program interruption, your program is
suspended and data sets may be open. The
best action for a non-assembler language
programmer is to issue the ABEND command,
which will close data sets and cause a new
task to be logged on. Experienced Assembler
Language programmers use PCS to dump areas
in storage to determine the cause of the
program interruption. For a discussion of
the meaning of program interruptions,
consult IBM System/360: Principles of
Operation, GA22-6821.
Filter Code: XSA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Reguirement determined by: CZAHA
Variable data supplied by: CZAHA
E002 PROGRAM INTERRUPT 3 (EXECUTE) VPSW=value
E004 PROGRAM INTERRUPT 5 (ADDRESSING) VPSW=value
Explanation: A program interruption occurs
when an instruction given to the computer is
invalid or contains invalid addresses or
constants. Assembler Language programmers
will know what diagnostic action to take.
If you do not know what to do at this point,
you should at least enter the pes command:
DISPLAY O:lSR to obtain the contents of the
general registers and (if a floating point
interrupt is involved): DISPLAY 0:6D. This
information will aid someone familiar with
machine instructions. At the point of
program interruption, your program is
suspended and data sets may be open. The
best action for a-non-assembler language
programmer is to issue the ABEND command,
which will close data sets and cause a new
task to be logged on. Experienced Assembler
Language programmers use PCS to dump areas
in storage to determine the cause of the
program interruption. For a discussion of
the meaning of program interruptions,
consult IBM Systeml360: Principles of
Operation, GA22-6821.
Filter Code: XSA
Convereational Action
User: N/A
System: control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined ty: CZAHA
Variable data supplied by: CZAHA
Explanation: A program interruption occurs
when an instruction given to the computer is
invalid or contains invalid addresses or
constants. Assembler Language programmers
will know what diagnostic action to take.
If you do not know what to do at this point,
you should at least enter the PCS command:
DISPLAY O:15R to obtain the contents of the
general registers and (if a floating point
interrupt is involved): DISPLAY 0:6D. This
information will aid someone familiar with
machine instructions. At the Foint of
program interruption, your program is
suspended and data sets may be open.
The
best action for a non-assembler language
programmer is to issue the ABEND command,
which will close data sets and cause a new
task to be logged on. Experienced Assembler
Language programmers use PCS to dump areas
in storage to determine the cause of the
program interruption. For a discussion of
the meaning of program interruptions,
consult IB~ System/360: Principles of
Operation, GA22-6821.
Filter Code: XSA
Ccnversational Action
User:
N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZAHA
variable data supplied by: CZAHA
E003 PROGRAM INTERRUPT 4 (PROTECTION) VPSW=value
Explanation: A program interruption occurs
when an instruction given to the computer is
invalid or contains invalid addresses or
constants. Assembler Language programmers
will know what diagnostic action to take.
If you do not know what to do at this point,
you should at least enter the PCS command:
DISPLAY O:15R to obtain the contents of the
general registers and (if a floating point
interrupt is involved): DISPLAY 0:60. This
information will aid someone familiar with
EOOS PROGRAM INTERRUPT 6 (SPECIFICATION)
VPSW=value
Explanation: A program interruption occurs
when an instruction given to the computer is
invalid or contains invalid addresses or
constants. Assembler Language programnlers
will know what diagnostic action to take.
If you do not know what to do at this point,
you should at least enter the PCS command:
DISPLAY 0:15R to obtain the contents of the
general registers and (if a floating point
General Messages
519
interrupt is involved): DISPLAY O:6D. This
information will aid someone familiar with
machine instructions. At the point of
program interruption, your program is
suspended and data sets may be open. The
best action for a non-assembler language
programmer is to issue the ABEND command.
which will close data sets and cause a new
task to be logged on. Experienced Assembler
Language programmers use PCS to dump areas
in storage to determine the cause of the
program interruption. For a discussion of
tbe meaning of program interruptions,
consult IBM System/360: Principles of
Operation. GA22-6821.
Fil ter Code: XSA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZABA
Variable data supplied by: CZAHA
DISPLAY 0:15R to obtain the contents of the
general registers and (if a floating point
interrupt is inVolved): DISPLAY 0:6D. This
infOrmation will aid someone familiar with
machine instructions. At the point of
program interruption. your program is
suspended and data sets may be open.
The
best action for a non-assembler language
programmer is to issue the ABEND command,
which will close data sets and cause a new
task to be logged on. Experienced Assembler
Language programmers use PCS to dump areas
in storage to determine the cause of the
program interruption. For a discussion of
the meaning of program interruptions,
consult IBM System/360: PrinCiples of
Operation, GA22-6821.
Filter Code: XSA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
E006 PROGRAM INTERRUPT 7 (DATA) VPSW=value
Explanation: A program interruption occurs
when an instruction given to the computer is
invalid or contains invalid addresses or
constants. Assembler Language programmers
will know what diagnostic action to take.
If you do not know what to do at this point,
you should at least enter the PCS command:
DISPLAY 0:15R to obtain the contents of the
general registers and (if a floating point
interrupt is involved): DISPLAY 0:6D. This
information will aid someone familiar with
machine instructions. At the point of
program interruption, your program is
suspended and data sets may be open. The
best action for a non-assembler language
programmer is to issue the ABEND command,
which will close data sets and cause a new
task to be logged on. Experienced Assembler
Language programmers use PCS to dump areas
in storage to determine the cause of the
program interruption.
For a discussion of
the meaning of program interruptions,
consult IBM System/360: Principles of
Operation, GA22-6821.
Filter Code: XSA
Conversational Action
User: N/A
System: control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZABA
Variable data supplied by: CZAHA
E007 PROGRAM INTERRUPT 8 (FIXED-POINT OVERFLOW)
VPSW=value
Explanation: A program interruption occurs
when an instruction given to the computer is
invalid or contains invalid addresses or
constants. Assembler Language programmers
will know what diagnostic action to take.
If you do not know what to do at this point.
you should at least enter the PCS command:
520
E008 PROGRAM INTERRUPT 9 (FIXED-POINT DIVIDE)
VPSW=value
Explanation: A program interruption occurs
when an instruction given to the computer is
invalid or contains invalid addresses or
constants. Assembler Language progra~mers
will know what diagnostic action to take.
If you do not know what to do at this point,
you should at least enter the PCS command:
DISPLAY O:15R to obtain the contents of the
general registers and (if a floating point
interrupt is involved): DISPLAY O:6D. This
information will aid someone familiar with
machine instructions. At the point of
program interruption, your program is
suspended and data sets may be open.
The
best action for a non-assembler language
programmer is to issue the ABEND corr~and,
which will close data sets and cause a new
task to be logged on. Experienced Assembler
Language programmers use PCS to dump areas
in storage to determine the cause of the
program interruption. For a discussion of
the meaning of program interruptions.
consult IBM System/360: PrinCiples of
Operation, GA22-6821.
Filter Code: XSA
Conversational Action
User:
N/A
System: Control passes to Director.
Ncnconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
E009 PROGRAM INTERRUPT 10 program interruption.
Filter Code: XRA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZABA
Variable data supplied by: CZAHA
E01S SYSTEM FAULT:
EXTENDED PROGRAM INTERRUPT
(SOFTWARE GENERATED) VPSW=value
Explanation:
E014 SYSTEM FAULT:
EXTENDED PROGRA~ INTERRUPT
(SOFTWARE GENERATED) VPSW=value
Explanation:
Zero IORCB size causes an
extended (simulated) program interruption.
Filter Code: XRA
Conversational Action
User:
N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
522
The TSI timer interrupt counter
causing an extended (simulated)
prograE interruption.
Filter Code: XRA
Conversational Action
User: N/A
System: control passes to Director.
Nonconversational Action
User: N/A
system: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
overflo~ed,
E019 SYSTEM FAULT:
EXTENDED PROGRAM INTERRUPT
(SOFTWARE GENERATED) VPSW=value
Explanation: The TSI I/O interrupt counter
overflowed, causing an extended (simulated)
program interruption.
Filter Code: XRA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-11.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
E02A SYSTEM FAULT:
EXTENDED PROGRAM INTERRUPT
(SOFTWARE GENERATED) VPSW=value
Explanation: Count exceeds 991 with bit string
flag set for SETXP, causing an extended
(simulated) program interruption.
Filter Code: XRA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-11.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
E02B SYSTEM FAULT:
EXTENDED PROGRAM INTERRUPT
(SOFTWARE GENERATED) VPSW=value
Explanation: An unassigned page causes
extended (simulated) program interruption.
Filter Code: XRA
Conversational Action
User: N/A
System: control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-11.)
Requirement determined by: CZAHA
Var~able data supplied by:
CZAHA
E02C SYSTEM FAULT:
EXTENDED PROGRAM INTERRUPT
(SOFTWARE GENERATED) VPSW=value
Explanation: The count exceeds 1022 and the
bit string flag was not set for SETXP,
causing an extended (simulated) program
interruption.
Filter Code: XRA
Conversational Action
User: N/A
System: control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
E02D SYSTEM FAULT:
EXTENDED PROGRAM INTERRUPT
(SOFTWARE GENERATED) VPSW=value
Explanation: An entry to an interruptable
routine with type III linkage in effect with
P1 on causes an extended program
interruption.
Filter Code: XRA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Ref~rence Data (Also see Appendix B-17.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
E02E UNASSIGNED ENTER SVC CODE VPSW=value
Explanation: Violation has been treated as a
program interruption.
Filter Code: XSA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User:
N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-11.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
E02F USER SVC ISSUED BUT NO INTERRUPT ROUTINE
SPECIFIED VPSW=value
Explanation: Violation has been treated as a
program interruption.
Filter Code: XSA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-11.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
E021 UNASSIGNED ADDRESS SPECIFIED IN CKCLS MACRO
VPSW=value
Explanation: Violation has been treated as a
prograrr. interruption.
Filter Code: XSA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-11.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
E022 ILLEGAL CODE GIVEN TO SETUP/XTRCT VPSW=value
Explanation: Violation has been treated as a
program interruption.
Filter Code: XSA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
General Messages
523
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZABA
Variable data supplied by: CZABA
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZAHA
Variable data supplied by: CZABA
E021 SYSTEM FAULT:
EXTENDED PROGRAM INTERRUPT
(SOFTWARE GENERATED) VPSW=value
E023 AWAIT SVC NOT EXECUTED REMOTELY OR NOT LAST
HALFWORD OF ECB VPSW=value
Explanation: Violation has been treated as a
program interruption.
Filter Code: XSA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZABA
Variable data supplied by: CZABA
E024 SYSTEM FAULT:
EXTENDED PROGRAIo! INTERRUPT
(SOFTWARE GENERATED) VPSW=value
Explanation: Invalid SPT number was given to
ADSPG SVC processor, resulting in an
extended (simulated) program interruption
lIoIi th the VPSW shown.
Filter Code: XRA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZAHA
Variable data supplied by: CZABA
Explanation: A SETXP SVC is not on a word
boundary, causing an extended (simulated)
program interruption.
F il ter Code: XRA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-11.)
Requirement determined by: CZAHA
Variable data supplied by: CZABA
E02a SYSTEM FAULT:
EXTENDED PROGRAM INTERRUPT
(SOFTWARE GENERATED) VPSW=value
Explanation: The count of external addresses
is zero, causing an extended (simulated)
program interruption.
Filter Code: XRA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZABA
Variable data supplied by: CZAHA
E029 SYSTEM FAULT:
EXTENDED PROGRAM INTERRUPT
(SOFTWARE GENERATED) VPSW=value
E025 TERMINATED: SOFTWARE HAS DETECTED A POSSIBLE
HARDWARE MALFUNCTION. VPSw=vpsw
Explanation: A machine check that could not be
corrected lIoIith complete certainty has
occurred while executing in virtual storage.
Filter Code: XSA
Conversational Action
User:
N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: continues processing.
Reference Data (Also see Appendix B-11.)
Requirement determined by: CEAIR
Variable data supplied by: CEAIR
Explanation: All parameters are not on one
page. causing an extended (simulated)
program interruption.
Filter Code: XRA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-11.)
Requirement determined by: CZAHA
Variable data supplied by:
CZAHA
E03A SYSTEM FAULT:
EXTENDED PROGRAM INTERRUPT
(SOFTWARE GENERATED) VPSW=value
E026 SVC ISSUED WITHOUT SUFFICIENT
PRIVILEGE/AUTHORITY VPSW=value
Explanation: The user has issued a supervisor
call (SVC) which he is not authorized to
use, and the violation has been treated as a
program interruption.
Filter Code: XSA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
524
Explanation: An invalid number given to ADSPG
SVC processor has caused an extended
(simulated) program interruption.
Filter Code: XRA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZAHA
Variable data supplied by: CZABA
E03B ILLEGAL CODE GIVEN TO SETSYS/XTRSYS SVC
PROCESSOR VPSW=value
Explanation: Violation has been treated as a
program interruption.
Filter Code: XSA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System; Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
E03C ILLEGAL CODE GIVEN TO SETSYS/XTRSYS SVC
PROCESSOR VPSW=value
Explanation: Violation has been treated as a
program interruption.
Filter Code: XRA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
E03D SYSTEM FAULT:
EXTENDED PROGRAM INTERRUPT
(SOFTWARE GENERATED) VPSW=value
Explanation: An unsuccessful DEQUE I/O request
has caused an extended (simulated) program
interruption.
Filter Code: XRA
Conversational Action
User: N/A
System: control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
E03E SYSTEM FAULT:
EXTENDED PROGRAM INTERRUPT
(SOFTWARE GENERATED) VPSW=value
Explanation: The DRAM flag is illegally on,
causing an extended (simulated) program
interruption.
Filter Code: XRA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
E03F SYSTEM FAULT:
EXTENDED PROGRAM INTERRUPT
(SOFTWARE GENERATED) VPSW=value
Explanation: A relocate page-in error
(defective device) on a permanent volume
causes an extended (simulated) program
interruption.
Filter Code: XRA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZABA
Variable data supplied by: CZAHA
E030 SYSTEM FAULT:
EXTENDED PROGRAM INTERRUPT
(SOFTWARE GENERATED) VPSW=value
Explanation: No asynchronous error routine
exists for a device with an error, causing
an extended (simulated) program
interruption.
Filter Code: XRA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZAHA
Variable data supplied by: CZABA
E031 SYSTEM FAULT:
EXTENDED PROGRAM INTERRUPT
(SOFTWARE GENERATED) VPSW=value
Explanation: An asynchronous interruption was
received but there is no DE available for
the device, causing an extended (simulated)
program interruption.
Filter Code: XRA
Conversational Action
User: N/A
system: control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
E032 SYSTEM FAULT:
EXTENDED PROGRAM INTERRUPT
(SOFTWARE GENERATED) VPSW=value
Explanation: PGOUT request for 0 pages causes
extended (simulated) program interruption.
Filter Code: XRA
Conversational Action
User: N/A
system: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-1?)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
E033 SYSTEM FAULT:
EXTENDED PROGRAM INTERRUPT
(SOFTWARE GENERATED) VPSW=value
Explanation: SETTR is not being accepted
because the system limit has been reached,
causing an extended (simulated) program
General Messages
525
interruption.
Filter Code: XRA
Conversational Action
User: N/A
System: Contrcl passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
E0311 SYSTEM FAULT:
EXTENDED PROGRM! INTERRUPT
(SOFTWARE GENERATED) VPSW=value
Explanation: Program interruption received
while in type III linkage causes extended
(simulated) program interrupt.
Filter Code: XRA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see A~pendix B-17.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
E035 SYSTEM FAULT:
EXTENDED PROGRAM INTERRUPT
(SOFTWARE GENERATED) VPSW=value
Explanation: An SVC interruption received
while in type III linkage causes an extended
(simulated) program interrupt.
Filter Code: XRA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see A~pendix B-17.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
E036 SYSTEM FAULT:
EXTENDED PROGRAM INTERRUPT
(SOFTWARE GENERATED) VPSW=value
Explanation: Attempting to add more than 256
pages to shared pages causes an extended
(simulated) program interrupt.
Filter Code: XRA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-1?)
Requirement determined by: CZAHA
Variable data su~plied by: CZAHA
E037 VSEND MESSAGE TOO LONG OR SPAND PAGE BOUNDARY
VPSW=value
Explanation: A message in a VSEND has been
improperly created, and the violation has
been treated as a program interruption.
Filter Code: XSA
Conversational Action
526
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-1?)
Requirement determined by: CZABA
Variable data supplied by: CZAHA
E038 SYSTEM FAULT:
EXTENDED PROGRAM INTERRUPT
(SOFTWARE GENERATED) VPSW=value
Explanation: Trying to delete page from
unassigned segment causes an extended
(simulated) program interruption.
Filter Code: XRA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-1?)
Requirement determined by: CZAHA
Variable data supplied by: CZABA
E039 SYSTEM FAULT:
EXTENDED PROGRAM INTERRUPT
(SOFTWARE GENERATED) VPSW=value
Explanation: Request to delete page not
assigned causes extended (simulated) program
interruption.
Filter Code: XRA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-1?)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
EOIIO SYSTEM FAULT:
EXTENDED PROGRAM INTERRUPT
(SOFTWARE GENERATED) VPSW=value
Explanation: Diagnostic message handler has no
message for this extended (simulated)
program interruption.
Filter Code: XRA
Conversational Action
User:
N/A
System: Control passes to Director.
Nonconversational Action
User:
N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-11.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
&041 SYSTEM FAULT:
EXTENDED PROGRAM INTERRUPT
(SOFTWARE GENERATED) VPSW=value
Explanation: Relocate page-in error (defective
device) on moveable volume causes extended
(simulated) program interruption.
Fil ter Code: XRA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
Requirement determined by:
Variable data supplied by:
CZAHA
CZAHA
E046 OPERATOR TASK HAS BEEN REINITIALIZED
VPSW=value
E042 SYSTEM FAULT:
EXTENDED PROGRAM INTERRUPT
(SOFTWARE GENERATED) VPSW=value
Explanation: Relocate page-in error (medium
defective) causes extended (simulated)
program interruption.
Filter Code: XRA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
Explanation: Operator task has been
reinitialized after previous interruption.
Issued for software program interrupt code
0097.
Filter Code: XSA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
E047 UNAUTHORIZED USE OF TSSS SVC VPSW=value
E043 SYSTEM FAULT:
EXTENDED PROGRAM INTERRUPT
(SOFTWARE GENERATED) VPSW=value
Explanation: An lOCAL page-in error (device
defective) on a permanent volume causes an
extended (simulated) program interruption.
Filter Code: XRA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
E044 SYSTEM FAULT:
EXTENDED PROGRAM INTERRUPT
(SOFTWARE GENERATED) VPSW=value
Explanation: An lOCAL page-in error (device
defective) on a moveable volume causes an
extended (simulated) program interruption.
Filter Code: XRA
Conversational Action
USEU": N/A
System: control passes to Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
E045 SYSTEM FAULT:
EXTENDED PROGRAM INTERRUPT
(SOFTWARE GENERATED) VPSW=value
Explanation: An lOCAL page-in error (medium
defective) causes an extended (simulated)
program interruption.
Filter Code: XRA
Conversational Action
User: N/A
System: Control passes to Director.
Nonconversational Action
User:
N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Explanation: A TSSS SVC has been executed but
it was not put there by TSSS.
Filter Code: XSA
Conversational Action
User: N/A
System: Control passes to the Director.
Nonconversational Action
User: N/A
System: Task is abnormally terminated.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
E048 INVALID SVC CODE VPSW=value
Explanation: An invalid supervisor call has
been issued, and the violation has been
treated as a program interruption.
Filter Code: XSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
System: Continues processing.
Reference Data (Also see Appendix B-17.)
Requirement determined by: CZAHA
Variable data supplied by: CZAHA
E049 TERMINATED: VSmD OR XSEND SVC NOT EXECUTED
REMOTELY--VPSW=vpsw
Explanation: VSEND and XSEND SVC's must be
initiated by an EXECUTE instruction. This
was not done. The SVC was found in-line.
Software program interruption code 004B has
occurred.
Filter Code: XSA
Conversational Action
User: N/A
System: Awaits next command.
Nonconversational Action
User: N/A
system: Continues processing.
Reference Data (Also see Appendix B-12.)
Requirement determined by: CEAQS
Variable data supplied by: CEAQS
General Messages
527
line F ***
NOT FOUND WHERE REQUIRED
EXplanation: An individual dimension in a
dimension declaration is not followed by a
comma or a right parenthesis.
line -- seven-digit number of source
statement in question.
System Default Action: continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKAF
Variable data supplied by: N/A
Message residence: CEKCA
line F *** ALPHAMERIC CONSTANT OUT OF RANGE
Explanation: More than 255 characters occur in
an alphameric field in a FORMAT statement.
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKBF
Variable data supplied by: N/A
Message residence: CEKCA
line F *** ARRAY name IN SUBSCRIPT ON name
Explanation: An Unsubscripted array name has
appeared in a subscript expression.
name -- An alphameric name from the source
program.
line -- seven-digit number of source
statement in question.
System Default Action: continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKAG
Variable data supplied by: CEKCA
Message residence: CEKCA
line F *** ARRAY name IS NOT A FORMAL ARGUMENT
Explanation: An adjustable dimension has been
given for an array which is not a formal
subprogram argument.
name -- An alphameric name from the source
program.
line -- seven-digit nu.ber of source
statement in question.
System Default Action: continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKAF or CEKAS
Variable data supplied by: CEKCA
Message residence: CEKCA
line F **. name COMMON BLOCK INCONSISTENCY IN
EQUIVALENCE
EXplanation: The assignment indicated for one
or more variables in a COMMON block by
COMMON statements does not agree with the
assignment indicated by EQUIVALENCE
statements.
name -- An alphameric name from the source
program.
line -- seven-digit line number of END
statement of the program.
System Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKJC
Variable data supplied by: CEKJB
Message residence: CEKJB
line F *.* blocka blockb COMMON BLOCKS LINKED BY
EQUIVALENCE
Explanation: COMMON variables have been used
in EQUIVALENCE statements in such a way that
two different COMMON blocks are not
independent of each other.
blocka, blockb -- Alphameric names from the
source program.
line -- seven-digit line number of the END
statement of the program.
System Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKJC
Variable data supplied by: CEKJH
Message residence: CEKJH
line
name -- An alphameric name from the source
program.
line -- seven-digit number of source
statement in question.
System Default Action: continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKAF
Variable data supplied by: CEKCA
Message residence: CEKCA
line F *** ARRAY name IS TOO BIG
Explanation: An array, dimensioned in a
preceding statement, is declared in a TYPE
statement with a type and size that causes
the total size of the array to exceed the
allowed number of bytes; or, the dimensions
specified result in a total array size of
224 bytes or more.
528
F...
COUNT FIELD EXCEEDS 255
Explanation: The number of repetitions given
for a FORMAT specification exceeds 255.
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKBF
Variable data supplied by: N/A
Message residence: CEKCA
line F **. CROSS-REFERENCE TABLE OVERFLOW
Explanation: The internal table containing the
cross-reference list material has reached
its limit. The cross-reference list oFtion
is turned off. Further entries to other
internal tables however may cause the
compilation to be aborted.
line -- seven-digit number of source
statement in question.
system Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CERCI
Variable data supplied by:
N/A
Message residence: CEKCA
F...
line
VALUE
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKAL
Variable data supplied by: CEKCA
Message residence: CEKCA
line F ••• 00 LOOP ON name OVERLAPS END OF AN
OUTER LOOP.
END FORCED HERE.
DIMENSION name HAS BEEN ASSIGNED A
Explanation: A formal subprogram argument to
which a new value has been assigned already
is used as an adjustable dimension.
Explanation: The current statement is the end
of the range of a 00 statement. but the end
of the range of a later DO statement has not
yet appeared. The range of the later DO
statement is made to end here.
name -- An alphameric name from the source
program.
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CERAF
Variable data supplied by: CEKCA
Message residence: CEKCA
name -- An alphameric name frore the source
program.
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by:
CEKAJ
Variable data supplied by: CEKCA
Message residence: CEKCA
F...
line F ••• DIMENSION name IS NOT A FORMAL ARGUMENT
Explanation: A variable which is not a formal
subprogram argument has been used as an
adjustable dimension.
name -- An alphameric name from the source
program.
line -- seven-digit number of source
statement in question.
System Default Action: continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKAF
Variable data supplied by: CEKCA
Message residence: CEKCA
line
F...
line
DO LOOP VARIABLE OR PARAMETER IN
ASSIGNED GO TO STATEMENT
Explanation: An active DO loop variable,
li~it, or step is used in an assigned GOTO
statement. The current value of such a
variable should not have been set by an
ASSIGN statement.
line -- seven-digit number of source
statement in question.
System Default Action: continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKAQ
Variable data supplied by: N/A
Message residence: CEKCA
DIVIDE CHECK IN CONSTANT ARITHMETIC
line
Explanation: In performing a division of
constants in an expression, the compiler
encountered a division by zero.
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKAI
Variable data supplied by: N/A
Message residence:
CEKCA
line F ••• DO LOOP ON name IS UNFINISHED.
END SUPPLIED
F...
DO STATEMENT MUST NOT END A DO LOOP
Explanation: A DO statement has been specified
as the terminal statement of another DO
loop.
line -- seven-digit number of source
statement in question.
System Default Action:
Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKAZ
Variable data supplied by: N/A
Message residence: CEKCA
LOOP
Explanation: A DO loop has not been terminated
before the END statement. Termination of
the loop is forced at the end of the
program.
name -- An alphameric name from the source
program.
line -- Seven-digit line number of END
statement.
System Default Action: continues.
F...
line
name EXTENDS blockname COMMON BLOCK
BACKWARDS BY EQUIVALENCE. ABOVE VARIABLE
REASSIGNED TO ZERO IN ITS COMMON BLOCK.
Explanation: A variable which is placed in a
COMMON block due to its appearance in
EQUIVALENCE has an assignment ahead of the
first byte of the COMMON block. The
assignment is relocated to the first byte of
the block.
name, l:::lockname -- Alphameric names from the
source program.
General Messages
529
line -- Seven-digit line number of the END
statement of the program.
System Default Action: continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKJC
Variable data supplied by: CERJH
Message res1dence: CEKJH
line F *** EXTRANEOUS MATTER IGNORED AFTER
SYNTACTIC END OF STATEMENT
1. Explanation: Extraneous
are ignored after the
statement number list
or after the variable
non-blank characters
parenthesized
in an assigned Goro,
name in a computed
GOTO.
line -- seven-digit number of source
statement in question.
System Default Action: continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKAQ
Variable data supplied by: N/A
Message residence: CEKCA
2. Explanation: Extraneous non-blank characters
have been ignored after a syntactically
complete ASSIGN, BLOCK DATA, DO, or
arithmetic IF statement.
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKAR, CEKAZ,
CEKBC, CERBD, or CEKBI
Variable data supplied by: N/A
Message residence: CEKCA
line F
4. Explanation: In a FORMAT statement, non-blank
material following a zero-nesting level
right parenthesis is ignored.
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKBF
Variable data supplied by: N/A
Message residence: CEKCA
5. Explanation: In a SUBROUTINE, FUNCTION, or
ENTRY statement, extraneous non-blank
characters following the right parenthesis
closing the argument list are ignored.
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CERBS
Variable data supplied by: N/A
Message residence: CEKCA
530
FRACTION SIZE EXCEEDS FIELD WIDTH
Explanation: The number of fractional digits
given in a FORMAT specification will not fit
in the allocated field.
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-18.)
wequirement determined by: CEKBF
Variable data supplied by: N/A
Message residence: CEKCA
line F *** FUNCTION VALUE NOT DEFINED IN name
PROGRAM
Explanation: No value has been assigned to the
function name in a FUNCTION subprogram.
name
Alphameric name of subprogram.
line
Seven-digit line number of END
statement.
Systen Default Action: continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKAL
Variable data supplied by: CEKCA
Message residence: CERCA
line F
*** name HAS ALREADY BEEN DIMENSIONED
Explanation: An array name for which
dimensions have already been declared is
being dimensioned again.
name -- An alphameric name fron the source
program.
3. Explanation: Extraneous non-blank characters
are ignored after the keyword CONTINUE.
line -- seven-digit number of source
statement in question.
System Default Action: continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKAT
Variable data supplied by: N/A
Message residence: CEKCA
***
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKAF
Variable data supplied by: CEKCA
Message residence: CEKCA
line F
***
name HAS MORE THAN SEVEN DIMENSIONS
Explanation: More than seven dimensions are
declared for an array.
name -- An alphameric name from the source
program.
line -- seven-digit number of source
statement in question.
System Default Action: continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKAF
Variable data supplied by: CEKCA
Message residence: CEKCA
line F *** name HAS PREVIOUSLY BEEN ASSIGNED AN
INITIAL VALUE
Explanation: A variable for which initial
values have been specified is declared to be
in blank COMMON or in any COMMON block in a
non-BLOCK DATA program.
line -- seven-digit number of source
statement in question.
System Default Action: continues.
Reference Data (Also see Appendix B-1B.)
Requirement determined by: CEKAV
Variable data supplied by: CEKCA
Message residence: CEKCA
line
F...
ILLEGAL DIMENSION GIVEN FOR name
Variable data supplied by:
Message residence: CEKJH
line F .** statementno ILLEGAL JUMP INTO A LOOP.
DESTINATION NOT INNERMOST.
Explanation: A statement number in a DO loop,
which is not innermost in its nest. is
referenced from outside the nest.
Explanation: A dimension declaration contains
a dimension which is not an integer constant
or variable.
name -- An alphameric name from the source
program.
line -- seven-digit number of source
statement in question.
System Default Action: continues.
Reference Data (Also see Appendix B-1B.)
Requirement determined by: CEKAF
Variable data supplied by: CEKCA
Message residence: CEKCA
line
F...
ILLEGAL HEXADECIMAL CONSTANT
statementno -- A statement number from the
source program.
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-1B.)
Requirement determined by: CEKJE
Variable data supplied by: CEKJH
Message residence: CEKJH
line F ••• statementno ILLEGAL JUMP INTO A LOOP.
ORIGIN NOT LEVEL ZERO.
Explanation: A statement number in an
innermost DO loop has been referenced within
another DO loop.
EXplanation: A hexadecimal constant with no
digits following the Z is given as an
initial value in a type or data statement.
line -- seven-digit number of source
statement in question.
System Default Action: continues.
Reference Data (Also see Appendix B-1B.)
Requirement determined by: CEKCL
Variable data supplied by: N/A
Message residence: CEKCA
line F ••• ILLEGAL INITIAL VALUE(S) GIVEN FOR name
Explanation: A logical initial value has been
specified for an arithmetic variable or an
arithmetic initial value for a logical
variable in a type or DATA statement.
name -- An alphameric name from the source
name.
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-1B.)
Requirement determined by: CEKCL
Variable data supplied by: CEKCA
Message residence: CEKCA
line
F...
statementno ILLEGAL JUMP BETWEEN LOOPS
Explanation: A statement number in a DO loop
has been referenced from another loop which
is not nested inside the entered loop.
statementno -- A statement number from the
source program.
line -- seven-digit number of source
statement in question.
System Default Action: continues.
Reference Data (Also see Appendix B-1B.)
Requirement determined by: CEKJE
CEKJH
statementno -- A statement number from the
source program.
line -- seven-digit number of source
statement in question.
system Default Action: Continues.
Reference Data (Also see Appendix B-1S.)
Requirement determined by:
CEKJE
Variable data supplied by: CEKJH
Message residence: CEKJH
line F
***
ILLEGAL REPETITION FACTOR
Explanation: In a type or DATA statement, a
repetition factor followed by an asteriSK is
not an unsigned integer greater than 0 and
less than 16,777,216.
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-1S.)
Requirement determined by: CEKCL
Variable data supplied by: N/A
Message residence: CEKCA
line F
**.
ILLEGAL STATEMENT NUMBER FIELD
Explanation: A non-blanK, non-numeric
character appears in the statement number
field of an executable statement.
line -- seven-digit number of source
statement in question.
System Default Action: continues.
Reference Data (Also see Appendix B-1S.)
Requirement determined by: CEKAJ
Variable data supplied by: N/A
Message residence: CEKCA
.*.
line F
ILLEGAL TYPE MODIFIER AFTER ••
MODIFIER IGNORED.
General Messages
531
1. Explanation: A numeric type modifier that is
not legal for the type teing declared
appears in a TYPE statement.
line -- seven-digit number of source
statement in question.
System Default Action: continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKAS
Variable data supplied by: N/A
Message residence: CEKCA
2. Explanation: The length specification in an
IMPLICIT statement is incorrect for the data
type with which i t is used.
line -- seven-digit number of source
statement in question.
system Default Action: continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKBN
Variable data supplied by: N/A
Message residence: CEKCA
line F •• * name INCONSISTENCY IN EQUIVALENCE
Explanation: A non-COMMON variable appears
more than once in EQUIVALENCE in such a way
that it does not have a unique assignment.
name
An alphameric name from the source
program.
line -- Seven-digit line number of END
statement of the program.
System Default Action: ContinUes.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKJC
Variable data supplied by: CEKJH
Message residence: CEKJH
line F .** name INITIAL VALUE FOR BLANK COMMON
VARIABLE.
Explanation: Initial values have teen
specified for a variable which has been
placed in blank COMMON due to EQUIVALENCE.
name -- An alphameric name from the source
program.
line -- Seven-digit line number of the END
statement of the program.
System Default Action: continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKJC
Variable data supplied by: CEKJH
Message residence: CEKJH
line F *** name INITIAL VALUE FOR COMMON VARIABLE
IN MAIN OR SUBPROGRAM
Expl.anation: Initial values have teen
specified for a variable which has been
placed in a COMMON block in a non-BLOCK DATA
program.
name -- An al.phameric name from the source
program.
line -- Seven-digit line number of the END
statement of the program.
532
System Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKJC
Variable data supplied by: CEKJH
Message residence: CEKJH
F...
line
statementno INNERMOST LOOP ENTERED FROM
LEVEL ZERO BUT NOT EXITED.
Explanation: A statement number in the
innermost loop of a DO loop nest is
referenced from outside the nest, but the DO
loop does not itself contain a branch to a
point outside of the nest.
statementno -- A statement number from the
source program.
line -- seven-digit line number of the END
statement of the program.
System Default Action: continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKJB
Variable data supplied by: CEKJH
Message residence: CEKJH
line F ••• INTEGER.4 CONSTANT OUT OF RANGE
Explanation: An integer constant greater than
2,147,483,647 has appeared.
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKCQ
Variable data supplied by: N/A
Message residence: CEKCA
line F •• * name IS A COMMON BLOCK NAME
Explanation: A name being declared in an
EXTERNAL statement has been used as a COMMON
block name. A conflict in external usage of
this name could result.
name -- An alphameric name froR the source
program.
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-18.>
Requirement determined by: CEKAM
Variable data supplied by: CEKCA
Message residence; CEKCA
line F... name IS A FORMAL ARGUMENT
1. Explanation: The name of a formal subprogram
argument has been declared to be in COMMON.
naRe -- An alphameric name from the source
program.
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKAV
Variable data supplied by:
Message residence: CEKCA
CEKCA
2. EXPlanation: A formal subprogram argument is
presented as a list element in a NAMELIST
statement.
name -- An alphameric name from the source
statement.
line -- seven-digit number of source
statement in question.
system Default Action: continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKBB
Variable data supplied by: CEKCA
Message residence: CEKCA
3. Explanation: In a TYPE or DATA statement,
initial values are being specified for a
variable which is a formal subprogram
argument.
name -- An alphameric name from the source
program.
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKCL
Variable data supplied by: CEKCA
Message residence: CEKCA
line F *** name IS ALREADY IN
CO~MON
Explanation: A variable name which has already
been declared to be in a COMMON block
appears in a COMMON statement.
name -- An alphameric name from the source
program.
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKAV
Variable data supplied by: CEKCA
Message residence: CEKCA
line F *** name IS ALREADY TYPE type*n
Explanation: A name that has already been
assigned a type is declared in a TYPE
statement to be of a different type.
name -- An alphameric name from the source
program.
type*n -- LOGICAL*l, LOGICAL*4, INTEGER*2,
INTEGER*4, REAL*4, REAL*S, COMPLEX*S,
COMPLEX*16, AUTOMATIC
line -- seven-digit number of source
statement in question.
System Default Action: continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKAS
Variable data supplied by: CEKCA
Message residence: CEKCA
line F .** name IS CLASSIFIED AS classname
1. Explanation: Dimension information is given
for a name which has already been classified
as other than an array.
name -- An alphameric name from the source
program.
class name -- STATEMENT FUNCTION, EXTERNAL
SUBPROGRAM, INTRINSIC FUNCTION, NAMELIST,
ENTRY POINT, FUNCTION PROGRAM NAME, or
MODULE NAME
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-1S.)
Requirement determined by: CEKAF
Variable data supplied by: CEKCA
Message residence: CEKCA
2. Explanation: A name is declared in an EXTERNAL
statement which has already been classified
as not being an external subprogram.
name -- An alphameric name from the source
program.
classname -- UNDIMENSIONED VARIABLE, ARRAY,
STATEMENT FUNCTION, INTRINSIC FUNCTION,
NAMELIST, ENTRY POINT, FUNCTION PROGRAM
NAME, or MODULE NAME.
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKAM
Variable data supplied by: CEKCA
Message residence: CEKCA
3. Explanation: In a COMMON statement, an
alphameric name appears which is not a
variable name.
name -- An alphameric name from the source
program.
classname -- STATEMENT FUNCTION, EXTERNAL
SUBPROGRAM, INTRINSIC FUNCTION, NAMELIST,
ENTRY POINT, FUNCTION PROGRAM NAME, or
MODULE NAME.
line -- seven-digit number of source
statement in question.
System Default Action: continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKAV
Variable data supplied by: CEKCA
Message residence: CEKCA
4. Explanation: A list element in a NAMELIST
statement is not a variable name.
naJl'.e -- An alphameric name from the source
program.
class name -- STATEMENT FUNCTION, EXTERNAL
SUBPROGRAM, INTRINSIC FUNCTION, NAMELIST,
ENTRY POINT, or MODULE NAME.
line -- seven-digit number of source
statement in question.
System Default Action: continues.
General Messages
533
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKBH
Variable data supplied by: CEKCA
Message residence: CEKCA
5. Explanation: In a TYPE or DATA statement.
initial values are being specified for a
name which is not a variable name.
name -- An alphameric name from the source
program.
classname -- STATEMENT FUNCTION. EXTERNAL
SUBPROGRAM. INTRINSIC FUNCTION. NAMELIST,
ENTRY POINT, or MODULE NAME.
line -- seven-digit number of source
statement in question.
system Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKCL
Variable data supplied by: CEKCA
Message residence: CEKCA
line F *** name IS IN BLANK COMMON
Explanation: In a TYPE or DATA statement.
initial values are being specified for a
variable in blank COMMON.
name -- An alpbameric name from the source
program.
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKCL
Variable data supplied by: CEKCA
Message residence: CEKCL
line F *** name IS IN COMMON
Explanation: In a TYPE or DATA statement,
initial values are being specified for a
COMMON variable. although the program is not
a BLOCK DATA program.
name -- An alphameric name from the source
program.
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKCL
Variable data supplied by: CEKCA
Message residence: CEKCA
line F *** LIBRARY ENTRY NAME name HAS A
CONFLICTING USAGE
Explanation: The entry name for the library
STOP routine has been used in this program
for another purpose. A STOP cannot be
supplied for an END statement to which
control may flow.
line -- seven-digit line number of END
statement of the program.
System Default Action: continues.
Reference Data (Also see Appendix B-18.)
534
Requirement determined by:
Variable data supplied by:
Message residence: CEKCA
CEKBG
CEKCA
line F *** LIST ILLEGAL WITH NAMELIST I/O
Explanation: In a READ or WRITE with NAMELIST
statement, an I/O list or other extraneous
material after the right parenthesis is
ignored by the compiler.
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKBE
Variable data supplied by: N/A
Message residence: CEKCA
line F *** MIXED TYPES IN COMPLEX CONSTANT
Explanation: The arithmetic types of the real
and imaginary parts of a complex constant do
not agree; one is REAL*4 and the other is
REAL*8.
line -- seven-digit number of source
statement in question.
System Default Action: continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKCH
Variable data supplied by: N/A
Message residence: CEKCA
line F *** MORE THAN 1320 CHARACTERS.
LINES WILL BE IGNORED.
FOLLOWING
Explanation: The line just supplied to the
compiler caused the number of characters in
the source statement to exceed 1320, the
maximum allowed. This and all following
continuation lines will be edited but not
compiled.
line -- Seven-digit line number of the line
that caused the limit to be exceeded.
System Default Action: Continue editing this
and all subsequent continuation lines in
this statement but not compiling them.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKTC
Variable data supplied by: N/A
Message residence: CEKTC
line F *** name MUST NOT BE DIMENSIONED BECAUSE OF
PREVIOUS USAGE
Explanation: Dimensions are being specified
for a name which has previously been used as
an undimensioned variable.
name -- An alphameric name from the source
program.
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKAF
Variable data supplied by: CEKCA
Message residence: CEKCA
line F *** NAME NOT FOUND WHERE REQUIRED
Explanation: A list of names in a NAMELIST
statement ends with a comma.
line -- seven-digit number of source
statement in question.
System Default Action: continues.
Reference Data (Also see Appendix B-1B.)
Requirement determined by: CEKBH
Variable data supplied by: N/A
Message residence: CEKCA
line F *** NAME 'name' TRUNCATED TO SIX CHARACTERS
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-1B.)
Requirement determined by: CEKAL
Variable data supplied by: N/A
Message residence: CEKCA
line F
name
line -- seven-digit number of source
statement in question.
system Default Action: continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKAE
Variable data supplied by: CEKCA
Message residence: CEKCA
line F **. NO EXECUTABLE STATEMENTS IN type
PROGRAM
Explanation: No executable statements appeared
in this non-BLOCK DATA program.
type -- MAIN, SUBROUTINE, or FUNCTION.
line -- Seven-digit line number of END
statement of the program.
System Default Action: Continues.
Reference Data (Also see Appendix B-1B.)
Requirement determined by: CEKAL
Variable data supplied by: CEKCA
Message residence: CEKCA
line F *** NO FORMAL ARGUMENTS ON name STATEMENT
IN FUNCTIOP PROGRAM
Explanation: In a FUNCTION subprogram. a
FUNCTION or ENTRY statement does not have an
argument list.
name
FUNCTION or ENTRY.
line
seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-1B.)
Requirement determined by: CEKBS
Variable data supplied by:
CEKCA
Message residence: CEKCA
.*.
line F
NO INITIAL VALUES ASSIGNED IN BLOCK
DATA PROGRAM
Explanation: No DATA statements, and no
initial value specifications in TYPE
statements, appeared in the BLOCK DATA
program.
NO LIST ELEMENTS GIVEN FOR NAMELIST
EXplanation: In a NAMELIST statement, no list
of names is given for a Namelist name.
Explanation: An alphameric name of more than
six characters has appeared. Only the first
six characters are used by the compiler.
name -- The first six characters of an
alphameric name from the source program.
.*.
name -- An alphameric name from the source
program.
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKBH
Variable data supplied by: CEKCA
Message residence: CEKCA
line F . . * NO STATEMENTS IN THIS PROGRAM
Explanation: No non-blank statements appeared
before the END statement. The program is
compiled as a vacuous main program.
line -- Seven digit line number of the END
statement of the program.
System Default Action: continues.
Reference Data (Also see Appendix B-1S.)
Requirement determined by: CEKAL
Variable data supplied by: N/A
Message residence: CEKCA
line
F...
NON-FORTRAN CHARACTER ENCOUNTERED
Explanation: A character not in the FORTRAN
character set has appeared outside of an
alphameric constant.
line -- seven-digit number of source
statement in question.
System Default Action: Ignore the statement
and continue.
Reference Data (Also see Appendix B-1B.)
Requirement determined by: CEKAE or CEKBF
Variable data supplied by: N/A
Message residence: CEKCA
line
F...
OVERFLOW IN CONSTANT ARITHMETIC
1. Explanation: In performin~ an arithmet~c
operation on constants ~n an express10n, the
compiler encountered a floating-point
overflow.
line -- seven-digit number of source
statement in question.
System Default Action: continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKAI
Variable data supplied by: N/A
Message residence: CEKCA
General Messages
535
2. Explanation: In adding two integer constants
appearing in an expression, overflow has
occurred.
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKCB
Variable data supplied by: N/A
Message residence: CEKCA
line F *** SIGN IS ILLEGAL ON type*n CONSTANT
Explanation: A sign has been specified on a
logical or alphameric constant in initial
value material in a TYPE or DATA statement.
type*n -- LOGICAL*4 or ALPHAMERIC.
line -- seven-digit number of source
statement in question.
System Default Action: continues.
Reference Data (Also see Afpendix B-18.)
Requirement determined by: CEKCL
Variable data supplied by: CEKCA
Message residence: CEKCA
line F *** statementno STATEMENT NUMBER DEFINED AS
FORMAT USED FOR FLOW.
Explanation: A statement number defined in the
statement number field of a FORMAT statement
has been used as a branch destination.
statementno -- A statement number from the
source program.
line -- seven-digit number of source
statement in question.
System Default Action: continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKJF
Variable data supplied by: CEKJH
Message residence: CEKJB
line F *** statementno STATEMENT NUMBER HAS
MULTIPLE DEFINITIONS.
Explanation: The same statement number has
been aSSigned to more than one source
program statement.
statementno -- Source program statement
number.
line -- Seven-digit line number of the line
containing the earlier definition of the
statement number.
System Default Action: continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKJB
Variable data supplied by: CEKJH
Message residence: CEKJB
line F *** statementno STATEMENT NUMBER IS NOT
DEFINED
Explanation: A reference has occurred to a
statement number which has not teen defined
536
in the statement number field of an
executable statement.
statementno -- A statement number from the
source program.
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKJF
Variable data supplied by: CEKJH
Message residence: CEKJH
line F *** statementno STATEMENT NUMBER USED AS
FORMAT IS NOT DEFINED
Explanation: A statement number referenced as
a FORMAT specification in an I/O statement
has not been defined in the statement number
field of a FORMAT statement.
statementno -- A statement number from the
source program.
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKJG
Variable data supplied by: CEKJH
Message residence: CEKJH
line F *** statementno STATEMENT NUMBER USED AS
FORMAT IS DEFINED AS NON-FORMAT
Explanation: A statement number used as a
FORMAT specification in an I/O statement has
been defined in the statement number field
of an executable statement.
statementno -- A statement number from the
source program.
line -- Seven-digit line number of the
statement using the erroneous statement
number.
system Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKJG
Variable data supplied by: CERJH
Message residence: CEKJH
line F *** SUBSCRIPT ON name OUT OF RANGE
Explanation: The constant subscript on an
array name in a DATA statement indicates a
position outside the space allocated for the
array.
name -- An alphameric name from the source
program.
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKCL
Variable data supplied by: CEKCA
Message residence: CEKCA
line F *** SYNTACTIC ERROR.
·char'.
CHECK CHARACTER
1. Explanation:
A syntactic error has been
detected in a FORMAT specification. at or
near an occurrence of the character quoted
in the message.
char -- any FORTRAN character.
line -- seven-digit number of source
statement in question.
System Default Action: continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKAF
Variable data supplied by:
CEKCA
Message residence: CEKCA
***** FIND ERROR WHILE EXECUTING LIBRARY SEARCH
FOR sname
line -- seven-digit number of source
state~nt in question.
System Default Action:
Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKBF
Variable data supplied by: CEKCK
Message residence:
CEKCA
2. Explanation: A letter other than A - F appears
in a hexadecimal constant given as an
initial value in a TYPE or DATA statement.
char -- G. H. I, J, K. L. M, N, 0, P, Q, R,
S, T, U, V, W, X, Y, Z, $
line -- seven-digit number of source
statement in question.
System Default Action: continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by: CEKCL
Variable data sUFplied by:
CEKCA
Message residence:
CEKCA
line F *** WORK AREA TOO SMALL, CROSS-REF.
DELETED.
Explanation: A program in which the
Cross-Reference Index oFtion was selected
has produced too much Cross-Reference Index
material to be handled. The program is
compiled without a Cross-Reference Index.
line -- Seven-digit line nuwber of the END
statement of the program.
System Default Action:
Delete the Cross
Reference List and continue.
Reference Data (Also see Appendix B-18.)
Requirement determined by:
CEKSK
Variable data supplied by: N/A
Message residence: CEKSA
line F *** ZERO COUNT FIELD
Explanation: A count field specification in a
FORMAT statement is zero.
line -- seven-digit number of source
statement in question.
System Default Action: Continues.
Reference Data (Also see Appendix B-18.)
Requirement determined by:
CEKBF
Variable data supplied by: N/A
Message residence: CEKCA
line F *** ZERO DIMENSION GIVEN FOR name
Explanation:
Zero has been specified as a
dimension for an array.
name -- An alphameric name from the source
program.
Explanation: While trying to locate ·sname" in
a partitioned data set, the FIND routine
returned an error return code to LIBE
SEARCH. LIBE SEARCH treats this the same as
a not-found return but advises the user.
Probably due to some system failure.
·sname· is the argument name presented to
FIND. This condition did not cause a load
error indication by the loader.
Conversational Action
User: N/A
System: Continue.
Nonconversational Action
User: N/A
System: Continue.
Reference Data
Requirement determined by: CZCDL
Variable data supplied by:
CZCDL
Message residence: CZCDL
Message issued by: CZCDL
Destination
Conversational: User's Terminal
Nonconversational:
Task SYSOUT
Transmittal technique: GATE
FIRST LINE IN MEMBER OR DS IS number
Explanation: User specified a line number
smaller than any line number in data set.
Conversational Action
User: N/A
System:
Processing continues.
Nonconversational Action
User: N/A
System:
processing continues.
Reference Data
Requirement determined by: CZAEM
Variable data supplied by:
CZAEM
Message residence: CZAEM
Message issued by: CZAEM
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: MSGWR
FOLLOWING ARE MISSING RELATIVE PUBLIC VOLUMES.
MOUNT PACK(S) ON ANY AVAILABLE DRIVE AND PRESS EOB
AFTER DRIVE BECOMES READY.
Explanation: Volumes in the public volume
table have not been mounted.
Conversational Action
User:
NlA (startup still in progress)
System: N/A
Nonconversational Action
User:
Operator mounts the packs on drives
and presses EOB.
System: Continues processing.
System Default Action: Will continue prompting
for correct replies.
Reference Data
General Messages
537
Requirement determined by: CEIAA
Variable data supplied by: CEIAA
Message residence:
CEIAA
Destination
Conversational: Operator's terminal
Nonconversational: Operator's terminal
Transmittal technique: Own I/O routine
GETTING ERROR CONDo
VOLUME GIVEN.
TRYING TO MOUNT THE FIRST
EXplanation: The above message is printed if
Mount Req.
(CZCAA) returns to program with
an error indication. Mount Request is
called to have the first volume mounted.
Conversational Action
System: Processing continues.
User:
Should check that first volume is all
right and diagnose any messages sent by
mount request.
Nonconversational Action
User: Task deleted.
System: Processing continues.
System Default Action: Terminate compilation.
Reference Data
Requirement determined by: CZCFBl
Variable data supplied by:
N/A
Message residence: CZCFBP
Message issued by: GATE (CZAAB)
Destination
Conversational:
User's terminal
Nonconversational:
Task SYSOUT
Transmittal technique: GATWR (by means of a
call to the LPC PUTDIAG entry, if in
conversational mode).
GETTING PAGE OUT ERRORS.
PAGE.
CANNOT RELOCATE DSCB
Explanation:
If user ID option was called for.
the DSCBs will be updated and then
rewritten.
If an error occurs during page
out, then the program will attempt to
relocate page. If program fails to relocate
page, the above message is printed.
Conversational Action
User:
If disk pack has room, relocation
will be tried many times -- if above
error is printed disk pack may be bad or
filled up.
System: Processing continues.
Nonconversational Action
User: Task deleted.
System: Processing continues.
System Default Action: Terminate compilation.
Reference Data
Requirement determined by: CZCFBl
Variable data supplied by: N/A
Message residence: CZCFBP
Message issued by: GATE (CZAAB)
Destination
Conversational: User's terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATWR (by means of a
call to the LPC PUTDIAG entry, if in
conversational mode>.
ILLEGAL CODE GIVEN TO SETUP/XTRCT SVC PROCESSOR
Explanation: The code indicating which field
in the TSI is to be referenced is not valid.
Task interrupt code X'48'.
538
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System:
N/A
Reference Data
Requirement determined by: CEAH2
Variable data supplied by: N/A
Message residence: CZABA
Message issued by: CZABA
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: MSGWR
IN USE.
CANNOT BE ERASED.
DSNAME IGNORED.
Explanation: User's data set is open by
another task.
Conversational Action
User:
May reenter command whenever data set
is released by other task(s).
System: Returns control to caller.
Nonconversational Action
User:
None.
System: Returns control to caller.
System Default Action:
N/A
completion Code:
ReglS=X'S8'
Dump Code:
N/A
Reference Data
Requirement determined by:
CZAEJ
Variable data supplied by: CZAEJ
Message residence: SYSMSG
Message issued by: CZAEJ
Destination
Conversational: Terminal
Nonconversational: SYSOUT
Transmittal technique: MSGWR
INCORRECT RESPONSE
Explanation: The operator gave an incorrect or
invalid response to a preceeding message.
The error may have been either in form or
content.
The operator is then given the
of port unity to re-enter the information
correctly.
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User: Give the correct response to the
preceding message
System:
If no response is received, the
system waits.
If response is incorrect,
the message is repeated.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: N/A
Message residence: CEIAA
Message issued by:
CEIAA
Destination
Conversational: N/A
Nonconversational: operator's Terminal
Transmittal technique:
Own I/O routine.
INCORRECT TO-DEVICE.
JOB TERMINATED.
Explanation: The user has specified an
unacceptable device as an output device.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: Correct faulty control statement and
reload program.
System: N/A
Reference Data
Requirement determined by: CEBDP
Variable data supplied by: N/A
Message residence: CEBDP
Message issued by: CEBDP
Destination
Conversational: N/A
Nonconversational: MSG Device
Transmittal technique: I/O package for
Independent Utility programs.
INPUT ERROR ON PAT PAGE XX OF VOLUME
(VOLID) (TYPE 2311 ). SDA=XXXX.
2314
NO FURTHER PAGES CAN BE ALLOCATED FROM ALL OR PART
OF THIS VOLUME.
Explanation: This will notify user and system
that the PAT should be relocated on pack
with error.
Conversational Action
User:
None - pack should be re-DASDIED with
PAT in new location.
System: Prevent further page allocation
from region of volume represented by
rewriting PAT with all entries on ERROR
PAGE=7F
Nonconversational Action
User: Same as above.
System: Same as above.
System Default Action: Set all PAT entries to
fully allocated.
Completion Code: N/A
Dump' Code: N/A
Reference Data
Requirement determined by: CZCEI
Variable data supplied by: CEAAQ
Message residence: CZCEI
Message issued by: CZCEI
Destination: If private volume to SYSOUT;
in all cases to SYSLOG.
Transmittal technique: WTL and, if private
volume, GATWR.
INSUFFICIENT SPACE ON NEW VOLUME
Explanation: The VAM2 volume did not have
enough room to contain all the data sets on
the VAM1 volume.
Probably due to the fact
that the new volume was not clean.
Processing terminated.
Conversational Action
User: Specify clean V2 volume or restore
specified volume and try again.
Reference Data (See Appendix B-27.)
INTERMITTENT MACHINE ERROR WITH GLOBAL DAMAGE.
Explanation: Machine malfunction has
apparently destroyed much of the supervisor
in core. The system will be restarted.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: Follow installation procedures for
notifying users that the system bas
failed. Call this message to the CE's
attention.
System: System will be restarted.
Reference Data
Requirement determined by: CGCMA
Variable data supplied by:
N/A
Message residence: CGCMA
Message issued by: CGCMA
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmi ttal technique: Own I/O routine.
INTERMITTENT MACHINE ERROR WITH NO RETRY
Explanation: This condition comes about when
SERR cannot retry an instruction because of
some threshold, but it does not find any
fault within the scope of its testing of the
CPU's and memories.
ConVersational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
system: If machine check was taken in
supervisor state, RECONFIGURATION calls
in STARTUP to restart the system. If
machine check was taken in problem state,
a message, "SOFTWARE HAS DETECTED A
POSSIBLE HARDWARE MALFUNCTION- is written
on the affected user's terminal and the
system will continue processing other
tasks.
Reference Data
Requirement determined by: CGCMA
Variable data supplied by: N/A
Message residence: CGCMA
Message issued by: CGCMA
Destination
Conversational: N/A
Nonconversational: operator's Terminal
Transmittal technique: Own I/O routine.
INTERMITTENT STORAGE PARITY ERRORS ON PAGE xxxx K
Explanation: A page of core storage is
failing.
In the message above xxxx will be
replaced by the decimal representation of
the number of the affected page.
Reconfiguration will determine whether the
system must be restarted or whether only one
user is affected.
In the first case RESTART
IN PROGRESS will appear on the operator's
console. For the second case, no further
message will be sent to the operator but the
system will write SOFTWARE HAS DETECTED A
POSSIBLE HARDWARE MALFUNCTION on the
affected user's terminal. The system will
continue serving other users after notifying
the affected user or users of the failure.
Conversational Action
User: N/A
System: ~/A
Nonconversational Action
User: Call this message to the CE"s
attention.
System: See Explanation.
Reference Data
Requirement determined by: CGCMA
Variable data supplied by: CGCMA
Message residence: CGCMA
General Messages
539
Message issued by: CGCMA
Destination
Conversational: N/A
Nonconversational:
operator's Terminal
Transmittal technique:
Own I/O routine.
INTERtHTTENT STORAGE PARITY ERRORS ON STORAGE
ELEMENT x.
Explanation:
In the message above, x will be
replaced by 1, 2, 3 or 4, corresponding
respectively to SE A, B, C and D, to
indicate which SE is malfunctioning.
Reconfiguration will call in Startup to
restart the system.
Conversational Action
User:
N/A
System:
N/A
Nonconversational Action
User:
Follow installation procedures for
notifying users that the system has
failed.
Notify the C.E.
System: will be restarted.
Reference Data
Requirement determined by: CGCMA
Variable data supplied by: CGCMA
Nessage residence:
CGCMA
r~essage issued by:
CGC~A
Destination
Conversational:
N/A
Nonconversational: Operator's Terminal
Transmittal technique: Own I/O routine.
INTERVENTION REQUIRED ON ccuu.
READY
ENTER 55 WHEN
Explanation:
Intervention by the operator is
necessary on the device whose address
appears in place of ccuu above.
cc
hexadecimal representation of channel
controller and channel.
uu
hexadecimal representation of unit and
device.
Conversational Action
User:
N/A
Syst-.em: N/A
Noncon,,'ersational Action
User: Ready the device, and enter 55 on the
operator's terminal.
System:
waits for operators response; then
if 55 is entered before device is ready,
message is repeated; or if there is a
non-55 entry, a valid response is
requested by ENTER 55 WHEN READY.
Reference Data
Requirement determined by:
CEIAA
Variable data supplied by: CEIAA
Message residence:
CEIAA
Message issued by:
CEIAA
Destination
Conversational: N/A
Nonconversational: operator's Terminal
Transmittal technique:
Own I/O routine.
INVALID, COMMAND CANCELED
EXElanation:
DSNAME specified by user is
formatted incorrectly or contains invalid
characterts.
Conversational Action
User:
Correct error and enter next command.
540
System: Returns control to caller.
Nonconversational Action
User: None.
System:
Returns control to caller.
System Default Action: N/A
Completion Code: Reg15=X'OS'
Lump Code: N/A
Reference Data
Requirement determined by: CZAEJ
Variable data supplied by:
CZAEJ
Message residence:
SYSMSG
Message issued by:
CZAEJ
Destination
Conversational: Terminal
Nonconversational: SYSOUT
Transmittal technique: MSGWR
INVALID DATA SET SPECIFICATIONCS) WILL BE
EYPASSED.
EXElanation: One or more delta data set names
do not adhere to the required fOrIl'at.
Invalid delta data set names and their
associated data sets, if any, are ignored.
The narres of invalid delta data sets will
follow this message.
Conversational Action
User: N/A
System:
N/A
Nonconversational Action
User: Correct the data set names on the
delta volume and re-IPL spEcifying the
new data set names.
System:
Unless new data set names are
added, continues processing with the
incorrect data set names dropped frcm the
hierarchy at search.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by:
CEIAA
Message residence: CEIAA
Message issued by:
CEIAA
Destination
Conversational:
N/A
Nonconversational: Operator's Terminal
Transmittal technique: Own I/O routine.
INVALIC FSA'S.
CORRECT AND IPL.
EXElanation: There are duplicate floating
storage address (FSA'S) on the storage
elements attached to the IPL'd CPU. This
message may appear only for a non-simplex
CPU.
Conversational Action
User: N/A
System:
N/A
Nonconversaticnal Action
User: Either change the FSA of ene of the
storage elements, or partition out one of
them" and then re- IPL.
SystelT': Startup is reinitiated by IPL.
Systerr waits and message is repeated with
each IPL until the error condition is
rectified.
Reference Data
Requirement determined by:
CEIAP
Variable data supplied by:
N/A
Message residence:
CEIAP
Message issued by: CEIAP
Destination
Conversational:
N/A
Nonconversationalz Operator's Terminal
Transmi ttal technique: OWn I/O routine.
INVALID LENGTH
EXplanation: The length specified does not
fall in the range zero to 256.
Conversational Action
User: 'N/A
System: Follows above message by request
for control statement.
Nonconversational Action
User: N/A
system: Index generation terminated.
Reference Data
Requirement determined by: CGC}(A
Variable data supplied by: N/A
Message residence: CGC}(A
Message issued by: CGCKA
Destination
Conversational: User's Terminal
Nonconversational: SYSOUT
Transmi ttal technique: GATWR
INVALID SHARED-PAGE TABLE NUMBER GIVEN TO ADSPG
SVC PROCESSOR
Explanation: The shared page table number
supplied to add shared pages could not be
found in the RSPI tables. Task interrupt
code X'4A'.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data
Requirement determined by: CEAQ6
Variable data supplied by: N/A
Message residence: CZAHA
Message issued by: CZAHA
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: MSGWR
INVALID USE OF HEADER AND SCAN
INVALID OR UNEXPECTED RET. CODE FROM
CATALOG/CZAEI. SEE GPR 11.
Explanation: CZABD attempted to catalog a
non-VAM data set involved in a PRINT command
or a PR macro.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System.: N/ A
Reference Data (Also see Appendix B-03.)
Requirement determined by: CZABD
Variable data supplied by: CZABD
Message residence: CZABD
Message issued by: CZACP
Destination
Conversational: User's Terminal
Nonconversational: Task's SYSOUT
Transmittal technique: ABEND Macro
Explanation: Both SCAN and HEADER were
specified as keywords in the control
statement.
Conversational Action
User: N/A
System: Follows above message by request
for control statement.
Nonconversational Action
User: N/A
System: Index generation terminated.
Reference Data
Requirement determined by: CGC}(A
Variable data supplied by: N/A
Message residence: CGC}(A
Message issued by: CGCKA
Destination
Conversational: User's Terminal
Nonconversational: SYSOUT
Transmi ttal technique: GATWR
I/O DRUM FAILURE ON SDA xxxx
INVALID REGISTER NOTATION SPECIFIES--x
Explanation: Used when Register 1 is used for
oplist. time or length or Register 14 is
used for time or length operands, x
identifies which register is used. Macro
expansion terminated.
Conversational Action
User: N/A
System: Continues.
Nonconversational Action
User: N/A
System: continues.
Reference Data:
Requirement determined by: EBCDTIME Macro
Variable data supplied by: EBCDTIME Macro
Message residence: CHDERMAC
Message issued by: CHDERMAC
Destination
Conversational: User's Terminal; List
Data Set
Nonconversational: Task SYSCUT; List
Data Set
Transmittal technique: MNOTE
Explanation: The I/O operations used to output
an I/O error record on drum have not been
completed successfully. Either a SIO
instruction was rejected, or an I/O
operation ended in error. The variable is
the symbolic device address of the drum on
which the I/O operation was attempted. No
recording can be done and control returns to
caller.
Conversational Action
User: Follow installation procedures
regarding I/O device failures.
System: Processing continues.
Nonconversational Action
User: Follow installation procedures
regarding I/O device failures.
System: processing continues.
Reference Data
Requirement determined by: CZASY
Variable data supplied by: CZCRX
Message residence: CHAMCB
Message issued by: CZCRX
Destination: Operator's Terminal
Transmittal technique: WTO Macro
General Messages
541
I/O INBOARD ERROR PATH ccuu
EXplanation: This message is produced in the
event of a solid inboard failure of a task
I/O operation. The variable is the last
path used actual I/O address (IERLP), taken
from the I/O inboard error record (CBAIER).
=
=
cc
channel, uu
unit.
Conversational Action
User: Follow installation procedures
regarding I/O device failures.
System: processing continues.
Nonconversational Action
User: Follow installation procedures
regarding I/O device failures.
System: Processing continues.
Reference Data
Requirement determined by: CZCRP or CZCZA
Variable data supplied by: CZCRX
Message residence: CHAMCB
Message issued by: CZACA
Destination: Operator's Terminal
Transmi ttal technique: lITO Macro
I/O OUTBOARD ERROR ON SDA xxxx
EXplanation: Either a solid outboard failure
of a task I/O operation or an SDR bucket
overflow has occurred. The variatle is the
address (SDTSDA) of the device in error,
taken from the I/O statistical data table
(CHASDT).
Conversational Action
User: Follow installation procedures
regarding I/O device failures.
System: Processing continues.
Nonconversational Action
User: Follow installation procedures
regarding I/O device failures.
System: processing continues.
Reference Data
Requirement determined by: CZCRY
Variable data supplied by: CZCRX
Message residence: CHAMCB
Message issued by: CZACA
Destination: Operator's Terminal
Message residence: CGCMA
Message issued by: CGCMA
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: Own I/O routine.
XXXXXX IS NOT IN VAMl FORMAT.
REQUEST CANCELLED
Explanation: Processing is terminated if the
old volume is not VAMl formatted.
Conversational Action
User: Reenter command specifying a VAMl
formatted volume.
Reference Data (See Appendix B-27.)
XXXXXX IS NOT IN VAM2 FORMAT.
REQUEST CANCELED
Explanation: Processing is terminated if the
volume is not a VAM2 formatted volume.
Conversational Action
User: Re-enter command specifying VAM2
formatted volume.
Reference Data (See Appendix B-27.)
IVM DSCB(S} MISSING FOR dsname
Explanation: End of cylinder occurred on the
IPL volume while searching for the data set
naRe indicated.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: Missing data set must be put on the
IPL volume.
System: Waits for re-IPL of startup.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: CEIAA
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: Own I/O routine.
IPL VOLUME NOT ACCESSIBLE.
KEY LENGTH:
Explanation: Reconfiguration has determined
that the system must be restarted, and has
tried to load in startup by all the paths
given in the SYSRES path table. This
table's location is given in CHASYS system
table. Each attempt to load has resulted in
some type of I/O failure. The sense bytes
obtained after the last attempt will have
been stored in the field SENSEi.
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User: The operator should verify that there
is a SYSRES pack on at least one of the
symbolic device addresses assigned to
SYSRES during the creation of the system.
The operator should then IPL the system
for that device.
System: TSS/360 is restarted.
Reference Data
Requirement determined by: CGCMA
Variable data supplied by: N/A
542
XXXXXXX KEY POSITION:
XXXXXX
Explanation: For index sequential data sets,
the length of the key in bytes is specified,
and the displacement of the key from the
beginning of the record is given. This
message results from execution of a
DSS? command.
System Default Action: processing continues.
Reference Data
Requirement determined by: CZAELl
Variable data supplied by: CZAELl
Message residence: CZAELl
Message issued by: CZAELl
Destination
Conversational: User's Terminal
Nonconversational: Task's SYSOUT
Transmittal technique: GATE
••••• LENGTH OF REJECTED CSECT cname IN MODULE
Mnamel EXCEEDS LENGTH OF PREVIOUSLY LOADED CSECT
IN MODULE mname2 ••••• STORAGE PROTECTION ERROR IS
POSSIBLE.
EXplanation: While loading "mname1,· the
loader encountered a CSECT, "cname,- that
already exists in loaded module -mname2.·
The occurrence in wmnamel· is rejected, and
all references are tied to ·mname2.· If the
user references the portion of the rejected
CSECT that lies beyond the upper limit of
the already loaded CSECT, there exists the
potential for either a storage protection
error, or an erroneous reference into
another CSECT or storage block.
This CSECT rejection condition causes a load
error indication by the loader.
System Default Action: continue.
Reference Data
Requirement determined by: CZCDL
Variable data supplied by: CZCDL
Message residence: CZCDL
Message issued by: CZCDL
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATE
*** LIBERMAINT ERROR *01* LIBRARY lname TO BE
DELETED NOT FOUND ***
EXplanation: While attempting to close
"lname,- LIBERMAINT was unable to find the
appropriate DCB in the open chain of open
library DCBs.
System Default Action: continue.
Reference Data
Requirement determined by: CZCDH
Variable data supplied by: CZCDH
Message residence: CZCDH
Message issued by: CZCDH
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATE
LINE xxxx CANNOT BE ENABLED. I/O ERROR.
BYTES = yyyy. SENSE BYTE = zz.
STATUS
Explanation: In attempting to enable the
terminal line specified by xxxx, an
unrecoverable error occurred. The status
bytes are indicated in hexadecimal by yyyy.
If lhe unit check bit is set in the status
bytes and sense information is available, it
will be indicated by zz. This condition may
result from the specified line being set in
CE TEST on the 2702 console.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User:
If line is necessary for system
operation, operator must halt STARTUP,
have line repaired or taken out of CE
TEST mode, and re-IPL STARTUP.
System: ProceSSing continues. If
corrective action is not taken, system
continues with line not enabled.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: CEIAA
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: Own I/O
LINE xxxx BAS AN INCORRECT ENTRY IN 2702 TABLE
Explanation: Startup cannot determine how to
process the 2702 line specified by xxxx
because the entry for the line in the
configuration control block is invalid. The
message will be printed for either of the
following two conditions:
1.
2.
Neither a dial nor a dedicated line type
is indicated.
The line adapter type for the line type
specified, is incorrect.
This is a system error.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: The entry in the configuration
control block for the terminal line
specified should be corrected and STARTUP
initialized.
System: processing continues. If
corrective action is not taken, the
specified terminal line cannot be used by
TSS.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: CEIAA
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: Own I/O routine
***** LOADER UNABLE TO ASSIGN PUBLIC STORAGE FOR
UNNAMED CSECT -- PRIVATE STORAGE ALLOCATED INSTEAD
Explanation: Loader encountered an unnamed
CSECT in a module from a shared data set
with the public attribute set. Unnamed
CSECTs are never allocated public storage.
This condition did not cause a load error
indicator by the loader.
System Default Action: Continue.
Reference Data
Requirement determined by: CZCDL
Variable data supplied by: N/A
Message residence: CZCDL
Message issued by: CZCDL
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATE
LOGOFF DUE TO CANCEL
Explanation: See text of message.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: LOGOFF of task occurs.
Reference Data
Requirement determined by: CZABA
Variable data supplied by: N/A
General Messages
543
Message residence: CZABA
Message issued by: CZABA
Destination
Conversational: N/A
Nonconversational: Task SYSOUT
Transmittal technique: VSEND Macro
LOGOFF DUE TO CANCEL ISSUED BY A PRIVILEGE-A USER.
Explanation: See text of message.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: LOGOFF of task occurs.
Reference Data
Requirement determined by: CZABA
Variable data supplied by: N/A
Message residence: CZABA
Message issued by: CZABA
Destination
Conversational: N/A
Nonconversational: Task SYSOUT
Transmittal technique: VSEND Macro
LOGOFF DUE TO CANCEL ISSUED BY A PRIVILEGE-B USER.
Explanation: See text of message.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: LOGOFF of task occurs.
Reference Data
Requirement determined by: CZABA
Variable data supplied by: N/A
Message residence: CZABA
Message issued by: CZABA
Destination
Conversational: N/A
Nonconversational: Task SYSOUT
Transmittal technique: VSEND Macro
LOGOFF DUE TO CANCEL ISSUED BY A PRIVILEGE-F USER.
Explanation: See text of message.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: LOGOFF of task occurs.
Reference Data
Requirement determined by: CZABA
Variable data supplied by: N/A
Message residence: CZABA
Message issued by: CZAEA
Destination
Conversational: N/A
Nonconversational: Task SYSOUT
Transmittal technique: VSEND Macro
MALFUNCTION IN PSA
Explanation: startup PRELUDE has detected a
failing location within the first page of
addressable storage (0-1000) in an area
which has not already caused a machine check
to be detected during processing.
544
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User:
a. Simplex CPU: Reverse the FSA settings
on the SEs, so that the address 0-1000
refer to different physical cores, and
reinitiate STARTUP by IPL.
b. Duplex CPU: same as for Simplex CPU or
change the setting of the PREFIX switch
on the CPU console and reinitiate
STARTUP via IPL.
System: Processing continues.
Reference Data
Requirement determined by: CEIAP
Variable data supplied by: N/A
Message residence: CEIAP
Message issued by: CEIAP
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: Own I/O routine
MALFUNCTION ON CHANNEL cc ACCESSING DEVICE ccuu
CSW STATUS BYTES CONTAIN yyyy CONDITION CODE z
Explanation: A condition code of 3, or a
condition code of 1 with status bytes
indicating a malfunctioning channel,
resulted from a start I/O to the device.
cc
hexadecimal representation of
channel controller and channel
uu
hexadecimal representation of unit
and device
yyyy
hexadecimal representation of the
contents of the status bytes
z
condition code: 1 or 3
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User: If device being accessed is other
than the public volume or IPL volume and
is necessary for system operation,
operator must halt STARTUP, correct
malfunction, and re-IPL STARTUP.
system: Processing continues. If
corrective action is not taken, the
device specified in the message will be
partitioned out of the system.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: CEIAA
Message residence: CEIAA
Message issued by: CEIAA
I;estination
Conversational: N/A
Nonconversational: operator's Terminal
Transmittal technique: Own I/O routine.
MALFUNCTION ON DEVICE ccuu SENSE BYTES CONTAIN
yyyyyyyy CONDITION CODE 1
Explanation: A malfunction is detected on a
device to which a start I/O has been issued.
cc
hexadecimal representation of
channel contro11er and channe1
uu
hexadecimal representation of
unit and device
yyyyyyyy
hexadecimal representation of the
contents of the sense bytes
The csw status bytes indicate a unit check
or unit exception and the sense bytes
indicate trouble as other than end of
cylinder or intervention required.
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User:
If the device is other than the IPL
volume or the public volume and is
necessary for system operation, the
operator must halt STARTUP, correct the
malfunction, and re-IPL STARTUP.
System: Processing continues.
If
corrective action is not taken, the
device specified in the message will be
partitioned out of the system.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: CEIAA
Message residence:
CEIAA
Message issued by:
CEIAA
Destination
Conversational: N/A
Nonconversational: operator's Terminal
Transmittal technique: Own I/O routine.
MALFUNCTION ON DEVICE xxxx
Explanation: An unrecoverable I/O error has
occurred on the direct access device
specified. The CSW is stored in symbolic
location SSAVE2 and for a unit check the
sense information may be obtained in
location SENSE. A listing of STARTUP
PRELUDE should be referenced to obtain the
absolute core location.
xxxx=device
address.
Conversational Action
User:
N/A
System:
N/A
Nonconversational Action
User: The operator should substitute
another direct access device and IPL
startup again.
System: System waits until Startup is
reinitiated.
Reference Data
Requirement determined by: CEIAP
Variable data supplied by:
CEIAP
Message residence: CEIAP
Message issued by: CEIAP
Destination
Conversational:
N/A
Nonconversational: Operator's Terminal
Transmittal technique:
Own I/O routine.
Conversational: User's Terminal
Nonconversational: SYSOOT
Transmittal technique: GATWR
MEMBER CANNOT BE DELETED.
COMMAND CANCELED.
Explanation: The DELETE command cannot be
issued against a member of a data set.
Either delete the entire data set or erase
individual members.
Conversational Action
User:
Correct error and enter next command.
System: Returns control to caller.
Nonconversational Action
User: None.
System: Returns control to caller.
System Default Action: N/A
Completion Code: Reg15=X'2C'
Dump Code: N/A
Reference Data
Requirement determined by: CZAEJ
Variable data supplied by:
CZAEJ
Message residence:
SYSMSG
Message issued by: CZAEJ
Destination
Conversational: Terminal
Nonconversa tional:
SYSOUT
Transmittal technique: MSGWR
MEMBER (name) INVALID.
COMMAND CANCELED.
Explanation: FIND cannot find the member in
the POD of the data set as specified by
user.
Conversational Action
User:
Correct error and enter next command.
System: Returns control to caller.
Nonconversational Action
User: None.
System: Returns control to caller.
System Default Action:
N/A
Dump Code: N/A
Completion Code: Reg15=X'20·
Reference Data
Requirement determined by: CZAEJ
Variable data supplied by:
CZAEJ
Message residence: SYSMSG
Message issued by: CZAEJ
Destination
Conversational: Terminal
Nonconversational:
SYSOUT
Transmittal technique: MSGWR
MEMBER SPECIFIED BY PARTIALLY QUALIFIED
COMMAND CANCELED.
DSNA~~.
MEANINGLESS KEYWORD
Explanation: Keyword is not LENGTH, HEADER or
SCAN.
Conversational Action
User:
N/A
System: Follows above message ty request
for control statement.
Nonconversational Action
User: N/A
System: Index generation terminated.
Reference Data
Requirement determined by:
CGCKA
Variable data supplied by: N/A
Message residence: CGCKA
Message issued by:
CGCKA
Destination
Explanation:
To erase a member, it must be
entered with a fully qualified DSNAME.
Conversational Action
User:
Correct error and enter next corrmand.
System: Returns control to caller.
Nonconversational Action
User: None.
System: Returns control to caller.
Systerr, Default Action:
N/A
Completion Code: Reg15=X'1C'
DumF Code:
N/A
Reference Data
Requirement determined by: CZAEJ
variable data supplied by: CZAEJ
Message residence:
SYSMSG
Message issued by: CZAEJ
General Messages
545
Destination
Conversational: Terminal
Nonconversational: SYSOUT
Transmi ttal technique: MSGWR
MESSAGE LENGTH FOR TERMINAL OUTPUT DEFINED AS LESS
THAN 1.
Explanation: See text of message.
Conversational Action
User:
Depends on source of bad length.
If
user supplied it, he should collect GATE
macro and try again.
System: After user's response, continues
processing.
Nonconversational Action
User:
N/A
System:
N/A
Reference Data
Requirement determined by: CZAAB
Variable data supplied by: N/A
Message residence: CZAAB
Message issued by: CZAAB
Destination
Conversational:
User's Terminal
Nonconversational: N/A
Transmittal technique:
GATE
•••• * MODULE NAME mname IS code.
FOR THIS MODULE.
SEP NOT DEFINED
Explanation:
"code" will be either ILLEGAL or
DUPLICATE.
While loading "mname", the
standard entry point (SEP) name was
discovered to be either illegal or to
duplicate the name of an already loaded
external entry point, CSECT, or module.
Note that the SEP name takes on the
attributes of the module's first
non-rejected PSECT (or, lacking such, the
first non-rejected CSECT). Illegality
occurs when either
1.
User authority = U and
a.
"mname" begins with SYS and the
associated CSECT is nonsystem, or
b.
"mname" begins with CZ or CBB and
the associated CSECT is
nonprivileged system, or
c.
"mname" does not begin with CZ or
CHB and the associated CSECT is
privileged, or
2. User authority = P and mname begins
with CZ or CHB and the module was not
loaded from SYSLIB.
References or calls to this module by
"mname" are impossible.
System Default Action: continue.
Reference Data
Requirement determined by: CZCDL
Variable data supplied by: CZCDL
Message residence: CZCDL
Message issued by:
CZCDL
Destination
Conversational:
User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique:
GATE
MODULE NOT DELETED THAT DEFINES SYMBOL sname
BECAUSE OF OUTSTANDING REFERENCES
546
Explanation: ·sname" is symbol in DELETE adcon
group, or argument of UNLOAD command.
The
module that contains ·sname" was not
unloaded because of outstanding implicit
references to it after construction of the
candidate list. This also means that none
of the modules on the candidate list will be
unloaded.
System Default Action: continue.
Reference Data
Requirement determined by: CZCDU
Variable data supplied by: CZCDU
Message residence: CZCDU
Message issued by: CZCDU
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATE
MOUNT ON DRIVE drive label VOLUME volume
Explanation: Required volume not mounted.
Operator is asked to mount i t on specified
drive.
Both label and volume number are
given.
Conversational Action
User:
operator mounts volume and replies Y.
If he cannot mount volume, he replies N.
System: Task waits for reply, then sets
return code accordingly.
Nonconversational Action
User: Operator mounts volume and replies,
as described above.
System: Task waits for reply, then sets
return code accordingly.
Reference Data
Requirement determined by: CZCAB
Variable data supplied by: CZCAB
Message residence: CZCAB
Message issued by:
CZCAC
Destination
Conversational: Operator's Terminal
Nonconversational: Operator's Terminal
Transmittal technique: VSEND Macro
MULTIPLY SPECIFIED DELTA DATA SET(S) ••• ALL BUT TEE
FIRST SPECIFICATION WILL BE IGNORED.
Explanation: One or more delta data set names
are explicitly or implicitly s~ecified more
than once. An example of an implicit
multiple specification is a request in the
form USERID1., IVM01, USERID1* where
USERID1*, IVM01 is contained within
USERID1*, Startup puts USERID1*, IVM01 first
in the hierarchy and then all other delta
data sets with a first order qualification
of USERID1. are assigned hierarchy numbers
according to their position in the VTOC.
The name of a multiply specified delta data
set follows the message.
Conversational Action
User: N/A
System:
N/A
Nonconversational Action
User: Re-IPL and list delta data sets in
desired order if message indicates error.
System: continues as specified in message
text.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: CEIAA
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: NVA
Nonconversational: Operator's Terminal
Transmi ttal technique: OWn I/O routine.
NEGATIVE RESPONSE FROM USER TERMINAL ON READ AFTER
100 TIME SLICES ELAPSED.
Explanation: See text of message.
Conversational Action
User: N/A
System: Task abnormally terminated.
Nonconversational Action
User: N/A
System: N/A
Reference Data
Requirement determined by: CZAAB
Variable data supplied by: N/A
Message residence: CZAAB
Message issued by: CZAAB
Destination
Conversational: Operator's Terminal,
Operator's Log
Nonconversational: N/A
Transmittal technique: WTO Macro
NEGATIVE RESPONSE TO READ.
SEND.
SET KEYBOARD SWITCH TO
Explanation: See text of message.
Conversational Action
User: Specified in text.
System: After user's response, continues
processing.
Nonconversational Action
User: N/A
System: N/A
Reference Data
Requirement determined by: CZAAB
Variable data supplied by: N/A
Message residence: CZAAB
Message issued by: CZAAB
Destination
ConVersational: User's Terminal
Nonconversational: N/A
Transmittal technique: GATE
XXXXXX, NEWVOL, IS NOT PRIVATE.
REQUEST CANCELLED
Explanation: Volume to be converted onto was
not private.
Conversational Action
User: Re-enter command specifying private
volume.
Reference Data (See Appendix B-27.)
NEGATIVE RESPONSE FROM USER TERMINAL ON WRITE
AFl'ER 100 TIME SLICES ELAPSED.
NEWVOL PARAMETER MISSING.
EXplanation: See text of message.
Conversational Action
User: N/A
System: Task abnormally terminated.
Nonconversational Action
User: N/A
System: N/A
Reference Data
Requirement determined by: CZAAB
Variable data supplied by: N/A
Message residence: CZAAB
Message issued by: CZAAB
Destination
Conversational: Operator's Terminal,
Operator's Log
Nonconversational: N/A
Transmittal teChnique: WTO Macro
NEGATIVE RESPONSE TO CARD INPUT. CONTINUE INPUT
ON KEYBOARD. TYPE '~C' TO GET BACK TO CARD
READER.
EXplanation: See text of message.
Conversational Action
User: Specified in text.
System: After user's response, continues
processing.
Nonconversational Action
User: N/A
System: N/A
Reference Data
Requirement determined by: CZAAB
Variable data supplied by: N/A
Message residence: CZAAB
Message issued by: CZAAB
Destination
Conversational: User's Terminal
Nonconversational: N/A
Transmittal technique: GATE
REQUEST CANCELLED
Explanation: Parameter defaulted or
nonexistent. Processing is terminated.
Conversational Action
User: Re-enter command with proper
parameters.
Reference Data (See Appendix B-27.)
NO ASYNCHRONOUS INT ENTRY FOR OPERATOR-S TERMINAL'
IN PATHFINDING TABLES. STARTUP TERMINATED.
EXplanation: This message will appear if there
is no asynchronous interrupt entry for the
operator's terminal in the device group
table of the pathfinding tables. The error
is detected when reverse pathfinding is
called with a path to the operator's
terminal and register 1. The link to a
s~ecific associated asynchronous interrupt
entry, is returned containing zeros.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: The only way to resolve the problem
is by performing a SYSBLD to generate
correct pathfinding tables.
System: If expected response is received,
processing continued; otherwise, system
waits.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: N/A
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: OWn I/O routine.
General Messages
547
NO CATALOG FOUND
Explanation: After doing a search key ewual
for TSS •••• *.SYSCAT on all public volumes
(except IPL and STRATO) no key of
TSS.*.**.SYSCAT is found. this message will
appear and the system will go into the wait
state.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: Mount volume containing catalog.
System: Re-IPL system; system waits.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: N/A
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: Own I/O routine.
through the configuration console and
reinitiate STARTUP by IPL.
System: Startup is reinitiated. Correction
is again requested if the settings are
invalid.
Reference Data
Requirement determined by: CEIAP
Variable data supplied by: N/A
Message residence: CEIAP
Message issued by: CEIAP
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: own I/O routine,.
NO DRUM PATH AVAILABLE
Explanation: There is no drum path a~ailable
for preservation recording. No recording
can be done and control returns to caller.
Conversational Action
User: N/A
System: Continues processing.
Nonconversational Action
User:
N/A
System: Continues processing.
Reference Data
Requirement determined by: CZASY
Variable data supplied by: N/A
Message residence: CHAMCB
Message issued by: CZACA
Destination
Conversational: Operator's Terminal
Nonconversational: Operator's Terminal
Transmittal technique: WTO Macro
NO CATALOG JFCB
Explanation: This message is produced if there
is no entry in the module CHBTDT for the
data set name: SYSCAT. This data set name
refers tothe Job File Control Block (JFCB)
for the catalog. This is a system error.
It is possible that the system residence
volume (SYSRES) needs to be restored or
replaced.
.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: If possible. reinitiate STARTUP by an
IPL of a backup SYSRES. or restore the
original contents.
System: System waits until Startup is
reinitiated by IPL.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: N/A
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational:
N/A
Nonconversational: Operator's Terminal
Transmittal technique: Own I/O routine.
NO FURTHER STATUS AVAILABLE FOR THIS DS BECAUSE •••
1.
Explanation: 11 user's private volume could
not be found or could not be mounted.
2.
CORRECT AND IPL.
Explanation: This message is produced if the
partitioning switches on the configuration
console are incorrectlyset. They must be
set so that all channel control units in the
system are:
1. Connected to the IPL'd CPU
2. Connected to all storage elements in the
system
3. Disconnected from all storage elements
not in the system
Any channel control unit which does not meet
all three requirements is considered to be
not in the system.
Conversational Action
User: N/A
System: N/1I
Nonconversational Action
User: Correctly partition the devices
548
DEVICE NOT AVAILABLE
Explanation: There are no devices currently
free on which to mount a user's private
volume.
3•
NO CCU'S IN SYSTEM.
VOLUME NOT AVAILABLE
LABEL OR READ ERROR
Explanation: Indicates a label error on the
disk pack or a hardware failure on the disk
drive.
4•
PRIVATE VOLUME COUNT EXCEEDS LIMIT
Explanation:
5.
User ration exceeded.
SYSTEM OVERLOAD
EXFlanation: Lengthy wait required before a
device becomes available on which to mount
a user's private volume.
6.
NO SECURE COMMAND GIVEN
Explanation: For background tasks only;
self-explanatory.
7•
r;s NOT ON EXPECTED VOLUME
Explanation: The system catalog indicates
that a data set is on a specific volume,
but the data set could not be found on that
volume.
8•
HARDWARE ERROR
Explanation: A hardware failure was detected
on a disk drive.
9.
INDEX ONLY.
NO FURTHER STATOS AVAILABLE
Explanation: There is a catalog entry for a
data set that has not yet been created, or
that no longer exists.
(Erasing all the members of a generation
data group, for example, leaves an empty
index level.)
10. DS OWNER NO LONGER JOINED TO THE SYSTEM
EXplanation:
Self-explanatory.
System Default Action: Processing continues.
Reference Data
Requirement determined by: CZAELl
Variable data supplied by: CZAELl
Message residence: CZAELl
Message issued by: CZAELl
Destination
Conversational: User's Terminal
Nonconversational: Task's SYSOUT
Transmittal technique: GATE
NO PAGING DRUMS AVAILABLE
EXplanation: No drums in the system are
available for paging of public IVM. Both
public and private segments of IVM will now
be paged out onto the specified paging disk.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: See above.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: N/A
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: operator's Terminal
Transmittal technique: OWn I/O routine.
NO RESPONSE FROM USER TERMINAL ON READ.
Explanation: See text of message.
Conversational Action
User: N/A
System: Task abnormally terminated.
Nonconversational Action
User: N/A
System: N/A
Reference Data
Requirement determined by: CZAAB
Variable data supplied by: N/A
Message residence: CZAAB
Message issued by: CZAAB
Destination
Conversational: Operator's Terminal.
Operator's Log
Nonconversational: N/A
Transmittal technique: WTO Macro
NO RESPONSE FROM USER TERMINAL ON WRITE
Explanation: See text of message.
Conversational Action
User: N/A
System: Task abnormally terminated.
Nonconversational Action
User: N/A
System: N/A
Reference Data
Requirement determined b~: CZAAB
Variable data supplied by: N/A
Message residence: CZAAB
Message issued by: CZAAB
Destination
Conversational: operator's Terminal,
Operator's Log
Nonconversational: N/A
Transmittal technique: WTO Macro
NON-CONVERSATIONAL EOJ
EXplanation: Detection of errors in
nonconversational mode causes the index
generation process to be terminated.
Message will have been issued describing
type of error.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: Returns to SYSIN for the next
command.
Reference Data
Requirement determined by: CGCKA
Variable data supplied by: N/A
Message residence: CGCKA
Message issued by: CGCKA
Destination
Conversational: N/A
Nonconversational: SYSOUT
Transmi ttal technique: GATWR
NON-CONVERSATIONAL TASK ABANDONED
Explanation: See text of message.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: Task abnormally terminated.
Reference Data
Requirement determined by: CZAAB
Variable data supplied by: N/A
Message residence: CZAAB
Message issued by: CZAAB
Destination
Conversational: N/A
Nonconversational: Operator's Terminal,
Operator's Log
Transmittal technique: WTO Macro
••••• NON code CSECT cname IN MODULE mnamel IS
REJECTED BY code CSECT IN MODULE mname2
•••••
STORAGE PROTECTION ERROR IS POSSIBLE.
General Messages
549
Explanation: "code" will be either PRIVILEGED
or read-only. While attempting to load
-mnamel." the loader encountered the CSECT.
·cname- that is already loaded in ·mname2.·
The CSECT in "mnamel· is either
non-privileged or non-read-only, and will be
rejected bacause of the previous occurrence
of the privileged or read-only CSECT in
"mname2."
Requirement determined by: CEIAA
Variable data supplied by: N/A
Message residence: CEIAA
Message issued by: CEIAA
Destination
Nonconversational: Operator's terminal
Transreittal technique: Own I/O routine
OLDVOL PARAMETER MISSING.
Since all references to ·cname" are tied to
the first occurrence, any attempt by the
user to store into a non-read-only CSECT
which has been rejected by a read-only CSECT
will result in a storage protection error.
This condition results in the above warning
message, but does not cause a load error
indication by the loader.
system Default Action: continue.
Reference Data
Requirement determined by: CZCDL
Variable data supplied by: CZCDL
Message residence: CZCDL
Message issued by: CZCDL
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATE
xxx
XXX - NOT ALL DATA PAGES FOUND.
IS IGNORED.
DATA SET
Explanation: Not all pages specified in
formats 'A' & 'B' DSCBs could be found.
Processing continues with next data set.
Reference Data (See Appendix B-27.)
NOT READY
Explanation: The tape drive whose address the
operator supplied for SYSERR dumps is in the
not-ready state. The operator may ready
this tape drive at his convenience.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: N/A
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: operator's Terminal
Transmittal technique: Own I/O routine
NOT VAM2 DISK
Explanation: Disk was not VAM2 formatted.
Conversational Action
User: None. Operator will re-reply to the
question asked.
system: continues
Nonconversational Action
User: None. Operator either changed disk
or will use another drive.
system: Continues.
Reference Data
550
REQUEST CANCELLED
Explanation: Parameter was defaulted or
nonexistent. Processing is terminated.
Conversational Action
User: Re-enter command correctly
Reference Data (See Appendix B-27.>
ONE OF THE FIRST TWO PARAMETERS WAS ZERO - FIX,
RE-ENTER
Explanation: The first two parameters are
necessary. If either one is a pointer to
zeros then the above message is printed.
User can re-enter a good command.
Conversational Action
User: User should check EVV format and
re-enter command.
System: Processing continues.
Nonconversational Action
User: Task deleted.
System: Processing continues.
System Default Action: Terminate compilation.
Reference Data
Requirement determined by: CZCFBl
Variable data supplied by: N/A
Message residence: CZCFBP
Message issued by: GATE (CZAAB)
Destination
Conversational: User's terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATWR (by means of a
call to the LPC PUTDIAG entry, if in
conversational mode).
ORGANIZATION:
code
Explanation: The following inserts may appear
in this data set organization message:
VP:
virtual partitioned; status for members
of a partitioned data set is not given.
VS: virtual sequential
VI: virtual index sequential
PS: phySical sequential
system Default Action: processing continues.
Reference Data
Requirement determined by: CZAELl
Variable data supplied by: CZAELl
Message residence: CZAELl
Message issued by: CZAELl
Destination
Conversational: User's Terminal
Nonconversational: Task's SYSOUT
Transmittal technique: GATE
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 2ijl.
Explanation: Base is 0 and exponent is 0 or
regative.
Systen, Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
Requirement determined by:
Variable data supplied by:
CHCBG
CHCBG
Reference Data (Also see Appendix B-20.)
Requirement determined by: CHCAA
Variable data supplied by: CHCAA
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 2q2.
EXplanation: Base is 0 and exponent is 0 or
negative.
system Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
Requirement determined by: CHCER
Variable data supplied by: CHCBH
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 2Q3.
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 252.
Explanation: Argument is less than 17Q.673.
System Default Action: Task terminated.
Ref~rence Data (Also see Appendix B-20.)
Requirement determined by: CHCAC
Variable data supplied by: CHCAC
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 253.
Explanation: Base is 0 and exponent is 0 or
negative.
System Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
Requirement determined by: CHCBI
Variable data supplied by: CHCBI
Explanation~
Argument is not greater than O.
System Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
Requirement determined by: CHCAE
Variable data supplied by: CBCAE
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 2QQ.
OU'1' OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 25Q.
Explanation: Base is 0 and exponent is 0 or
negative.
System Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
Requirement determined by: CHCBJ
Variable data supplied by: CHCBJ
Explanation: Argument absolute value is not
less than PI times 2**18.
System Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
Requirement determined by: CHCAI
Variable data supplied by: CHCAI
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 2Q5.
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 255.
Explanation: Base is 0 and exponent is 0 or
negative.
System Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
Requirement determined by: CHCBK
Variable data supplied by: CHCBK
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 246.
Explana~ion:
Imaginary argument is 0 and
exponent is not greater than O.
System Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
Requirement determined by: CHCBC
variable data supplied by: CHCBC
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 247.
Explanation: Imaginary argument is 0 and
exponent is not greater than O.
system Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
Requirement determined by: CHCBM
Variable data supplied by: CHCBM
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 251.
EXplanation: Argument is negative.
System Default Action: Task terminated.
Explanation: Argument (1) = argument (2)
System Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
Requirement determined by: CHCBQ
Variable data supplied by: CHCBQ
=
O.
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 256.
Explanation: Argument absolute value is not
less than 174.673.
System Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
Requirement determined by: CHCBA
Variable data supplied by: CHCBA
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 257.
Explanation: Argument absolute value is
greater than 1.
System Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
Requirement determined by: CHCAW
Variable data supplied by: CHCAW
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 261.
Explanation: Argument is negative.
System Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
General Messages
551
Requirement determined by:
Variable data supplied by:
Requirement determined by:
Variable data supplied by:
CHCAB
CHCAB
Otn' OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 262.
Explanation: Argument is not less than
174.67309.
System Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
Requirement determined by: CHCAD
Variable data supplied by: CHCAD
EXplanation: Argument is not greater than O.
system Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
Requirement determined by: CHCAF
Variable data supplied by: CHCAF
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 264.
EXplanation: Argument absolute value is not
less than PI times 2**50.
System Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
Requirement determined by: CHCAJ
Variable data supplied by: CHCAJ
=
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 274.
Explanation: Real argument absolute value is
not less than PI times 2**18.
System Default Action: Task terminated.
Reference Data (Also see Appendix B-20.) .
Requirement determined by: CHCAQ
Variable data supplied by: CHCAQ
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 275.
Explanation: Imaginary argument absolute value
is greater than 174.673.
System Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
Requirement determined by: CHCAQ
Variable data supplied by: CHCAQ
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 265.
=
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 273.
Explanation: Argument is not greater than
O+OI.
System Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
Requirement determined by: CHCAO
Variable data supplied by: CHCAO
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 263.
Explanation: Argument (l)
argument (2)
System Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
Requirement determined by: CHCBR
Variable data supplied by: CHCBR
CHCAM
CHCAM
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 281.
O.
Explanation: Real argument is greater than
174.673.
System Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
Requirement determined by: CHCAN
Variable data supplied by: CHCAN
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 266.
Explanation: Argument absolute value is not
less than 174.673.
System Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
Requirement determined by: CHCBB
Variable data supplied by: CHCBB
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 282.
Explanation: Imaginary argument is not less
than PI times 2**18.
System Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
Requirement determined by: CRCAN
Variable data supplied by: CHCAN
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 271.
Explanation: Real argument is greater than
1.74.673.
System Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
Requirement determined by: CHCAM
Variable data supplied by: CHCAM
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 283.
Explanation: Argument is not greater than
O+Oi.
System Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
Requirement determined by: CHCAP
Variable data supplied by: CHCAP
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM.
ERROR CODE IS 272.
Explanation: Imaginary argument is not less
than PI times 2**18.
System Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
552
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 284.
Explanation: Real argument absolute value not
less than PI times 2**18.
System Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
Requirement determined by: CHCAR
Variable data supplied by: CHCAR
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 285.
Explanation: Imaginary argument absolute value
is greater than 174.673.
System Default Action: Task terminated.
Reference Data (Also see Appendix &-20.)
Requirement determined by: CHCAR
Variable data supplied by: CHCAR
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 290.
Explanation: Real argument is greater than
57.5744 or less than 2- 252 •
System Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
Requirement determined by: CHCBT
Variable data supplied by: CHCBT
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 291.
Explanation: Real argument is greater than
4.2937 times 10 73 or less than O.
System Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
Requirement determined by: CHCBT
Variable data supplied by: CHCBT
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 295.
Explanation: The number of sense lights which
are to be turned off exceed 4.
System Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
Requirement determined by: CHCBD
Variable data supplied by: CHCBD
Explanation: Real argument is greater than
4.2937 times 10 73 power or less than O.
System Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
Requirement determined by: CHCBV
Variable data supplied by: CHCBV
PAGES:
length
Explanation: This message gives the length of
the data set in pages (one page = 4096
bytes) •
System Default Action: processing continues.
Reference Data
Requirement determined by: CZAELl
Variable data supplied by: CZAEL1
Message residence: CZAEL1
Message issued by: CZAEL1
Destination
Conversational: User's Terminal
Nonconversational: Task's SYSOUT
Transmittal technique: GATE
PAGING VOLUME IMPROPERLY FORMATTED.
AND THEN IPL.
Explanation: This message appears if S'l:ARTUP
determines that the paging volume is not VAM
formatted.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: VAM format paging device via DASDI.
System: system waits until IPL is
reinitiated.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: N/A
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: Own I/O routine
PATH ccuu ILLEGAL.
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 296.
Explanation: The number of sense lights to be
tested exceed 4.
System Default Action: Task terminated.
Reference Data (Also see Appendix E-20.)
Requirement determined by: CHCED
Variable data supplied by: CHCBD
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 300.
Explanation: Real argument is greater than
57.5744 or less than 2_252.
System Default Action: Task terminated.
Reference Data (Also see Appendix B-20.)
Requirement determined by: CHCBV
Variable data supplied by: CHCBV
OUT OF RANGE PARAMETER GIVEN A FORTRAN IV SUPPLIED
SUBPROGRAM. ERROR CODE IS 301.
FORMAT VOLUME
NOT IN PATHFINDING TABLES.
Explanation: STARTUP has presented the
specified path to the pathfinding routine
for processing. No entry for the path
exists, however, in the pathfinding tables.
This may be due to an error in the
correspondence list or channel control unit
table of the Configuration Control block
data set; or an error in the pathfinding
tables. This is a system error. cc =
hexadecimal representation of the channel
controller and channel: uu = hexadecimal
representation of the unit and device.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: If errors occur in subsequent
processing, a SYSGEN run must be executed
to correct the pathfinding tables or
TSS••• **.SYSCCB data set.
System: Continues processing. Startup may
encounter error conditions in subsequent
processing.
Reference Data
General Messages
553
Requirement determined by: CEIAA
Variable data supplied by: CEIAA
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: operator's Terminal
Transmittal technique: Own I/O routine
PATHFINDING TABLES INDICATE OPERATORS TERMINAL
CANNOT ACCEPT ASYNCHRONOUS INTERRUPTS. STARTUP
TERMINATED.
Explanation: The asynchronous bit in the
header of the device group table for the
operator's terminal is not on, indicating
that the operator's terminal cannot accept
asynchronous interrupts. The error is
detected when reverse-pathfinding is called
with a path to the operator's terminal and
register 0 is returned with bit seven not
set on.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User:
The only way to resolve this problem
is by performing a SYSBLD to generate
correct pathfinding tables.
System: If expected response is received,
processing continues; otherwise, system
waits.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: N/A
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: OWn I/O routine
PLACE FORM ID xxxx IN PRINTER xxxx
Explanation: Indicates to operator the printer
form and printer to be used.
Conversational Action
User: None. Operator places form in
printer, then replies Y (or N if he
cannot insert form).
System: N/A
Nonconversational Action
User: Same as for conversational task.
System: N/A
Reference Data
Requirement determined by: CZCAA
Variable data supplied by: CZCAA
Message residence: CZCAA
Message issued by: CZCAC
Destination
Conversational: Operator's Terminal
Nonconversational: Operator's Terminal
Transmittal technique: VSEND Macro
System: N/A
Nonconversational Action
User: Same as for conversational task.
System: N/A
Reference Data
Requirement determined by: CZCAA
Variable data supplied by: CZCAA
Message residence: CZCAA
Message issued by: CZCAC
Destination
Conversational: Operator's Terminal
NoncoDversational: Operator's Terminal
Transmittal technique: VSEND Macro
PLACE FORM ID xxxx IN READER NO.
xxxx
Explanation: Indicates to operator the card
stock and reader to be used.
Conversational Action
User: Operator places cards in reader then
replies Y (or N if he cannot insert
cards> •
System: N/A
Nonconversational Action
User: Same as for conversational task.
System:
N/A
Reference Data
Requirement determined by: CZCAA
Variable data supplied by: CZCAA
Message residence: CZCAA
Message issued by: CZCAC
Destination
Conversational: Operator's Terminal
Nonconversational: operator's Terminal
Transmittal technique: VSEND Macro
PLACE TAPE ID xxxx ON DEVICE xxxx
Explanation: Indicates to operator the
specific tape to be mounted and the device
to be used.
Conversational Action
User: Operator mounts tape as directed and
replies Y (or N if he cannot mount tape).
System: N/A
Nonconversational Action
User: Same as for conversational task.
System: N/A
Reference Data
Requirement determined by: CZCAA
Variable data supplied by:
CZCAA
Message residence: CZCAA
Message issued by: CZCAC
Destination
Conversational: Operator's Terminal
Nonconversational: Operator's Terminal
Transmittal technique: VSEND Macro
POSSIBLE MINOR ERRORS ENCOUNTERED DURING RUN OF
TASK.
Explanation: a warning flag is set during task
run and the above message will be printed at
end if any of the three following occur.
PLACE FORM ID xxxx IN PUNCH xxxx
(l) BAD CK SUM on DSCB fE'
Explanation: Indicates to operator the card
stock to be placed in card punch.
Conversational Action
User: Operator places cards in punch then
replies Y (or N if he cannot insert
cards).
554
(2) A volume to be initialized not VAM
(3) A DSCB page was relocated.
Conversational Action
User: Program will continue processing with
rest of set. Up to user's discretion to
check over his data.
System: Processing continues.
Nonconversational Action
User: Task deleted.
System: ProceSSing continues.
System Default Action: Terminate compilation.
Reference Data
Requirement determined by: CZCFBl
Variable data supplied by: N/A
Message residence: CZCFBP
Message issued by: GATE (CZAAB)
Destination
Conversational: User's terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATWR (l:y means of a
call to the LPC PUTDIAG entry, if in
conversational mode).
POSSIBLE BAD SSU FOR STORAGE ELEMENT x.
·x-
Explanation: In this message,
will be
either A,B,C, or D identifying the storage
element for which the status - switching
unit is malfunctioning.
Conversational Action
User: N/A
system: N/A
Nonconversational Action
User: Bring this message to the CE's
attention
System: Startup will be called to restart
the system.
Reference Data
Requirement determined by: CGCMA
Variable data supplied by: CGC~A
Message residence: CGCMA
Message issued by: CGC~A
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: Own I/O routine.
PRESENT JFCB INCOMPLETE
Explanation:
Insufficient space remains for
to the SYSCAT JFCB entry of the
This message follows
app~ndages
TDT.
WARNING -- COMPRESS CATALOG TO FEWER
VOLUMES. This is a system error.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: If complete catalog is required,
press STOP, compress the catalog to fewer
volumes, and reinitiate Startup by IPL.
System: catalog is compressed and Startup
is reinitiated by IPL. Catalog JFCB is
incomplete.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: N/A
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: Own I/O routine
PRINT MAPS?
0 1 2 3 •••
NONE IVM RESSUP BOTH
Explanation: Gives user the option of printing
none. one, or both of the Startup Memory
Maps.
Conversational Action
User: Responds by typing in the appropriate
numeric code for desired action.
System: N/A
Nonconversational Action
User: N/A
System:
Response
Action
no maps printed
o
IVM map only
1
2
Ressup map only
3
both
defaUlt
no maps
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: User thru main
operator
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: Own I/O routine
PRIVATE JOBS REQUIRING BULKIO DEVICES -PUNCH=XXXX, PRINT=xxxx
Explanation: The Batch Monitor at entry point
CZABA6 performs a scan of the BWQ searching
for private BULKIO jobs enqueued because
there are no available unit record output
devices. The number of entries thus
enqueued is counted and output to the
operator.
Conversational Action
User: N/A
System: Operator should. if possible, free
a device via the ASNED command to allow
pending job to start.
Nonconversational Action
User: N/A
System: N/A
Reference Data
Requirement determined by: CZABA
Variable data supplied by: CZABA6
Message residence: CZABAR
Message issued by: CZABA6
Destination: Operator's Terminal
Transmittal technique: GATE WRITE
***** PRIVILEGED CSECT IN MODULE mname+l IS
REJECTED BY NONPRIVILEGED CSECT IN MODULE mname+2
Explanation: While attempting to load module
-mname+l," the loader encounters privileged
CSECT ·cname." A nonprivileged CSECT of the
saKe name has already been loaded in this
task as part of "mname+2." Since the second
occurrence is rejected, and all references
are tied to the nonprivileged CSECT, a
privileged routine could enter nonprivileged
code inadvertently. This CSECT rejection
condition causes the loader to ABEND.
Conversational Action
User: N/A
System: Continue.
Nonconversational Action
User: N/A
General Messages
555
system: Continue.
Reference Data
Requirement determined by: CZCDL
Variable data supplied by: CZCDL
Message residence: CZCDL
Message issued by: CZCDL
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOOT
Transmittal technique: GATE
PROGRAM INTERRUPT AT xxxxxx.
INTERRUPT CODE yy.
Explanation: This is a system error.
xxxxxx=address of next sequential
instruction beyond the instruction which
caused the interrupt. It is a hexadecimal
representation of the real core address.
yy=interrupt code, 01=Operation,
02=Privileged Operation, 03=Execute.
04=Protection, 05=Addressing,
06=Specification, 01=Data, 08=Fixed-Point
Overflow, 09=Fixed-Point Divide, OA=Decimal
OVerflow, OB=Decimal Divide, OC=Exponent
Overflow, OO=Exponent Underflow,
OE=Significance, OF=Floating-point Divide
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: Use the stand-alone DUMP utility.
System: N/A
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: CEIAA
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmi ttal technique: Own I/O routine
••••• PUBLIC PAGE ID CSECT cname IN MODULE namne
CONTAINS ADCONS WHICH WILL NOT BE RELOCATED
Explanation: The loader has encountered a text
pase within a public CSECT that has adcons.
This is not allowed. The adcons on this
page will never be relocated.
wcname w is
the name of the public section. "mname" is
the name of the module to which ·cname"
belongs. This condition caused a load error
indication by the loader.
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data
Requirement determined by: CZCDL
Variable data supplied by: CZCDL
Message residence: CZCDL
Message issued by: CZCDL
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATE
OQ01I PAGING ERROR - nnnnnnnn HAS BEEN
RE-INITIALIZED
556
Explanation: Unrecoverable error paging
operator's XTSI or ISA page. Operator TSI
deleted, I/O purged, and new task with ID of
W1" created. Message hung (via CEAAN) on
new operator TSI. nnnnnnnn - User ID of
main operator task.
Conversational Action
User: Receives task program interrupt code
X'93' •
System: processing continues.
Nonconversational Action
User: N/A
System: N/A
Reference Data
Requirement determined by: CEAAQ
Variable data supflied by: CEAA~
Message residence: CEAAQ
Message issued by: CEAAN
Destination
Conversational: Operator's Terminal
Nonconversational: Operator's Terminal
Transmittal technique: GQE with MCB pointer
queued on external interrupt queue of
operator TSI.
OQ021 PAGING ERROR - USER nnnnnnnn HAS BEEN
DELETED
Explanation: Unrecoverable error paging in a
task's XTSI, PSW PAGE, etc. Time slice end
is forced. nnnnnnnn=User ID (in
hexadecimal> of task being deleted.
Conversational Action
User: Task deleted.
System: Processing continues.
Nonconversational Action
User: Task deleted.
System: processing continues.
Reference Data
Requirement determined by: CEAAQ
Variable data supplied by: CEAAQ
Message residence: CEAAQ
Message issued by: CEAAN
Destination
Conversational: Operator's Terminal
Nonconversational: Operator's Terminal
Transmittal technique: GQE with MCB pointer
hung on external interrupt queue of
operator TSI.
OQ03I AUXILIARY ALLOCATION HAS BEEN SUPPRESSED ON
I:EVICE nnnn
Explanation: An auxiliary storage device is
defective. Further allocation on it is
suppressed. nnnn=actual device address (in
hexadecimal>
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data
Requirement determined by: CEAAQ
Variable data supplied by: CEAAQ
Message residence: CEAAQ
Message issued by: CEAAN
Destination
Conversational: Operator's Terminal
Nonconversational: Operator's Terminal
Transmittal technique: GQE with MCB pOinter
is hung on external interrupt queue of
Operator TSI.
Nonconversational: Operator's terminal
Transmittal technique: Own I/O routine
READY PRINTER AND PRESS REQUEST.
READ ERROR ON sda.
CORRECT IF POSSIBLE.
Explanation: Read error on specified device
(symbolic device address is given).
Conversational Action
User: Operator tries to correct device
error. Replies Y if he can correct it, N
if he cannot.
System: Task waits for reply, then sets
return code accordingly.
Nonconversational Action
User: Operator tries to correct device
error.
System: Task waits for reply, then sets
return code accordingly.
Reference Data
Requirement determined by: CZCAC
Variable data supplied by: CZCAC
Message residence: CZCAC
Message issued by: CZCAC
Destination
Conversational: operator's Terminal
Nonconversational: Operator's Terminal
Transmittal technique: VSEND Macro
READER CHECK
Explanation: The card reader encountered a
unit check during a read-card STARTUP.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: None. Operator will correct
condition that caused the check.
System: Continues. Will reissue message is
condition occurs again.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: N/A
Message residence: CEIAA
Message issued by: CEIAA
Destination
Nonconversational: Operator's terminal
Transmittal technique: OWn I/O routine
READY READER AND REPLY r.
Explanation: .STARTUP attempted to read from
the card reader and the reader wasn't ready.
Conversational Action
User: None. Operator will reply r when the
card reader is ready.
System: continues.
Nonconversational Action
User: None. Operator will ready the card
reader.
System: Continues.
system Default Action: If reply is gotten and
the reader is still not ready, the system
will reprompt.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: N/A
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: Operator's terminal
Explanation: This message is produced if no
printers are in the TSS domain, or no
printer in the TSS domain is ready.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: Either enter a printer into the TSS
domain, or ready a printer which is
already in the domain of TSS. Then
depress the request key on the operator's
terminal.
System: Startup repeats the search for an
available printer.
Reference Data
Requirement determined by: CEIAP
Variable data supplied by: N/A
Message residence: CEIAP
Message issued by: CELAP
Destination
Conversational: N/A
Nonconversational: Operator's Terroinal
Transmittal technique: Own I/O routine.
RECEPTION ERROR ON CARD INPUT. CONTINUE INPUT ON
KEYBOARD. TYPE' ~C· TO GET BACl< TO CARD READER.
Explanation: See text of message.
Conversational Action
User: Specified in text.
System: After user's response, continues
processing.
Nonconversational Action
User: N/A
System: N/A
Reference Data
Requirement determined by: CZAAB
Variable data supplied by: N/A
Message residence: CZAAB
Message issued by: CZAAB
Destination
Conversational: User's Terminal
Nonconversational: N/A
Transmittal technique: GATE
RECONFIGURATION UNABLE TO PROCEED DUE TO INVALID
INPUT. PUSH REQUEST KEY FOR SYSTEM RESTART.
Explanation: The input to Reconfiguration has
values outside its valid ranges, or is
internally inconsistent. For example:
• The in~ut field that specifies the type
of machine failure does not contain any
of the pre-defined codes; or
• A damage report indicates that some CPU
has failed but does not identify the
£ailing CPU.
This is a system error. It could have been
caused by an erroneous branch into
reconfiguration, or by the destruction of
valid data in the system. There is a
possibility that if the system is restarted
it will fail again soon.
Conversational Action
User: N/A
General Messages
557
System: N/A
Nonconversational Action
User: Operator presses request key on his
terminal.
System: startup will be loaded to restart
the systelll.
Reference Data
Requirement determined by: CGCM
Variable data supplied by: N/A
Message residence: CGCM
Message issued by: CGCM
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique:
Own I/O routine.
RECORD FORMAT:
x
Explanation: This message indicates a data
set's format, as F (fixed), V (variable), or
U (undefined). Results from DSS? command.
System Default Action: continues processing.
Reference Data
Requirement determined by: CZAELl
Variable data supplied by: CZAELl
Message residence: CZAELl
Message issued by: CZAFLl
Destination
Conversational: User's Terminal
Nonconversational: Task's SYSOUT
Transmittal technique: GATE
RECORD LENGTH:
xxxxxxx
Explanation:
Indicates the maximum length of
each record, after DSS? command.
system Default Action: Continues processing.
Reference Data
Requirement determined by: CZAELl
Variable data supplied by: CZAELl
Message residence: CZAELl
Message issued by: CZAELl
Destination
Conversational: User's Terminal
Nonconversational: Task's SYSOUT
Transmittal teChnique: GATE
RECORD NOT FOUND
Explanation: An error exists on the IPL volume
such that a record of STARTUP or the
Configuration Control Block could not be
read. This condition is encountered when
the extents in the TSS •••••• STARTUP or
TSS •••••• SYSCCB data set control block
(DSCB) are incorrect. This is a system
error.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: The operator should substitute a
backup IPL volume and initiate Startup
again.
System: startup is reinitiated.
Reference Data
Requirement determined by: CEIAP
Variable data supplied by: N/A
Message residence: CEIAP
Message issued by: CEIAP
Destination
Conversational: N/A
558
Nonconversational: Operator's Terminal
Transmittal technique: Own I/O routine.
• •••• REF sname IN MODULE nmane+l REFERS TO A YET
UNDEFINED COMPLEX DEF IN MODULE mname+2
Explanation: While loading module wmname+l," a
reference to "sname" is a yet undefined
ccmplex def in module wmname+2.· Thus, the
possibility exists for a looping condition
which the loader cannot resolve. This
condition causes a load error indication by
the loader.
Conversational Action
User: N/A
System:
Continue.
Nonconversational Action
User: N/A
System: Continue.
Reference Data
Requirement determined by: CZCDL
Variable data supplied by: CZCDL
Message residence: CZCDL
Message issued by: CZCDL
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATE
REFERENCE DATE:
month/year
month/year CHANGE DATE:
Explanation; The reference date is the date
the data set was last referenced. The
change date is the date the data set was
created. All dates given in Julian calendar
form.
Systell' Default Action: continues processing.
Reference Data
Requirement determined by: CZAELl
Variable data supplied by: CZAELl
Message residence: CZAELl
Message issued by: CZAELl
Destination
Conversational: User's Terminal
Nonconversational: Task's SYSOUT
Transmittal technique: GATE
RELATIVE PUBLIC VOLUME xxxx MOUNTED ON DEVICE yyyy
EXCEEDS MAXIMUM NUMBER ALLOWED. REMOVE OR REPLACE
PACK AND HIT EOB.
Explanation: There are more public volumes
mounted than were allowed at system
generation.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User:
Operator removes or replaces the ~ack
in question.
System: continues processing.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: CEIAA
Message residence: CEIAA
Message issued by: CEIAA
Destination
Nonconversational: Operator's terminal
Transmittal technique: Own I/O routine
REMOVE DELTA DATA SET VOLUME IF NECESSARY.
PRESS EOB.
THEN
EXplanation: Disable the timer on the disk
drive for the delta volume if it is not
already marked private in the Format and
DSCB on the Volume Table of Contents.
Otherwise, the device will be marked
available on the Symbolic Device Allocation
Table and may be used by the system.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: See above.
System: See .above.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: N/A
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmi ttal technique: OWn I/O routine.
REQUEST TO DELETE PAGE FROM SEGMENT NOT PREVIOUSLY
ASSIGNED
EXplanation: The segment from which pages are
being deleted is not assigned. Task
interrupt code X'35.'
Conversational Action
User: N/A
system: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data
Requirement determined by: CEAND
Variable data supplied by: N/A
Message residence: CZAHA
Message issued by: CZAHA
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: MSGWR
RESTART Iij PROGRESS
1. Explanation: The message is issued to a
terminal user if he should dial in or is
already dialed in when a system restart
occurs.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: User must dial in again after several
minutes in order to log on.
System: Processing continues.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: N/A
Message residence: CEIAA
Message issued by: CElAA
Destination
Conversational: N/A
Nonconversational: User's Terminal
Transmittal technique: Own I/O routine.
2. Explanation: This message is produced during a
RESTART to inform the operator of the action
the system is undertaking.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data
Requirement determined by: CELAP
Variable data supplied by: N/A
Message residence: CEIAP
Message issued by: CEIAP
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: Own I/O routine
RETURN CODE FROM OBTAIN - HARDWARE ERROR.
Explanation: OBTAIN encountered a hardware
error. Processing is terminated.
Conversational Action
User: Attempt to correct and re-enter
command.
Reference Data (See Appendix B-27.>
RETURN CODE FROM OBTAIN - LABEL NOT FOUND.
Explanation: OBTAIN was unsuccessful reading
the volume label requested. Command will be
terminated.
ConVersational Action
User: Attempt to correct - patch label if
necessary - re-enter command.
Reference Data (See Appendix B-27.)
RUN: RC MINOR, IRA INSTRUCTION CAUSED A
NON-TRANSLATION EXCEPTION, TASK WILL BE PROGRAM
CHEeRED.
Explanation: If any LRA instruction executed
by SYSER fails. this message will be issued.
This only applies to V.M. SYSER.
Conversational Action
User: N/A
System: Will continue running -- the task
will be program checked.
Ncnconversational Action
User: N/A
System: Will continue running -- the task
will be program checked.
Reference Data
Requirement determined by: CEAIS
Variable data supplied by: N/A
Message residence: CEAIS
Message issued by: CEAIS
Destination
Conversational: Operator's Terminal
Nonconversational: Operator's Terminal
Transmi ttal technique: ERROR Macro
RUN:
RC MINOR. SYSER TIME SUB/R FAILED
Explanation: If the internal subroutine, in
SYSER which calculates the time of day fails
for any reason this message will appear.
Conversational Action
User: N/A
System: Will continue running. However the
time field of the SYSER message will be
cleared to O.
Nonconversational Action
General Messages
559
User: N/A
System: Will continue running. However the
time field of the SYSER message will be
cleared to O.
Reference Data
Requirement determined by: CEAIS
Variable data supplied by: N/A
Message residence: CEAIS
Message issued by: CEAIS
Destination
Conversational: Operator's Terminal
Nonconversational: Operator's Terminal
Transmittal technique: ERROR Macro
Rxx HAS BAD KEY/DATA/COUNT
Explanation: The specified error in the
specified record was encountered when
reading a track on a direct access device.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data
Requirement determined by: CEBDP
Variable data supplied by: CEBDP
Message residence: CEBDP
Message issued by: CEBDP
Destination
Conversational: N/A
Nonconversational: MSG Device
Transmittal technique: I/O package for
Independent utility.
SDA FOR SYSERR TAPE NOT IN SDAT.
TERMINATED.
STARTUP
Explanation: This message is produced if the
device entered as the SYSERR dump tape is
not listed in the symbolic device allocation
table (SDAT).
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: Re-initiate STARTUP via IPL and enter
a different device as the SYSERR dump
tape or, re-create the SDA tables to
reflect the true configuration.
System: STARTUP or SYSTEM re-initiated;
System waits.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: N/A
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: Own I/O routine.
SDA xxxx ILLEGAL.
NOT IN PATHFINDING TABLES.
Explanation: An error exists in the
pathfinding tables. xxxx = a symbolic
device address.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
560
User: If errors occur in subsequent
processing, a SYSGEN run must be executed
to correct the pathfinding tables.
system: Continues processing. Errors may
occur in subsequent processing.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: CEIAA
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: Own I/O routine.
** SERR ** time * cause * CPU cpuid * SE seid
E-REG opcode * ROS ADR ros * FCC failure * 10
location ***
*
Explanation: Message is produced when an
internal machine check or system error
(hardware attributed) occurs. Time - any
time of day (hr, min., sec.); cause - PAR
ADD, SER ADD, ROS PAR, MEM DATA, E-REG, MEM
ADR, RELOC ER, H-REG, MPY ERR, SYSERR; cpuid
- any CPU identification number (1 - 4);
seid - any storage element identification (A
- E); opcode - first halfword of any
instruction (000 - FFFF hexadecimal); res any ROS address (000 - FFF hexadecimal);
failure - code summarizing failure (01-solid
CPU failure, 02-intermittent storage
failure, i.e., more than one memory but less
than four pages have been found bad,
03-intermittent failure but no retry,
04-solid storage failure in one memory,
02-intermittent storage failure, i.e., less
than three pages bad, but only one memory,
SO-global memory damage, 40-retryable
failure); location - HB RR NN where BH is
the head number, RR is the record number, NN
is the byte number used to locate the
cOJl"lplete preservation error port on the
paging drum.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data
Requirement determined by: CMASG
Variable data supplied by: CMASB, or CMASG
Message residence: CMASC
Message issued by: CMASC
Destination
Conversational: operator's Terminal
Nonconversational: Operator's Terminal
Transmittal technique: I/O instruction used
to access device directly.
SERR MESSAGE 01xx MESSAGE old psw
Explanation: Message is produced when a SERR
module receives an unexpected machine check
while cperating.
xx
02
04
Module
CMASB
CMASD
05
CMASE
Message
ENVIR REC UNEXPECTED Mel
UNEXPECTED MACHINE CHECKCHECKER
UNEXPECTED MACHINE CEECKPOINTER
07
CMASG
UNEXPECTED MACHINE CHECKIRE
Old PSW - contents of the machine check old
PSW.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference 'Data
Requirement determined by: CMASB, CMASD,
CMASE, or CMASG
Variable data supplied by: CMASC
Message residence: CMASC
Message issued by:
CMASC
Destination
Conversational: Operator's Terminal
Nonconversational: Operator's Terminal
Transmittal technique: I/O instruction used
to access device directly.
SERR MESSAGE 02xx old psw
Explanation: Message is produced when a SERR
module receives an unexpected program
interrupt while operating.
(xx-identification of module 02 - OD; old
psw-contents of Old Program PSW.)
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data
Requirement determined by: CMASB through
CMASM
Variable data supplied by: CMASC
Message residence: CMASC
Message issued by: CMASC
Destination
Conversational: Operator's Terminal
Nonconversational: Operator's Terminal
Transmittal technique:
I/O instruction used
to access device directly_
SERR MESSAGE xx02 message
Explanation: This message is produced when an
abnormal condition occurs while environment
recording is operating.
xx
04
05
06
07
08
ENVIR
ENVIR
ENVIR
ENVIR
ENVlR
REC.
REC.
REC.
REC.
REe.
Message
ERROR WRITING RECORD
ERROR DRUM OVERFLOW
ERROR READING INDEX
ERROR WRITING INDEX
ERROR READING RECORD
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data
Requirement determined by:
Variable data supplied by:
Message residence: CMASC
Message issued by: CMASC
Destination
Conversational: Operator's Terminal
Nonconversational: Operator's Terminal
Transmittal technique: I/O instruction used
to access device directly.
SERR MESSAGE 04xx message
Explanation: Abnormal conditions occurred
during execution of CPU memory checkout
programs 1, 2, or 3.
xx
08
09
OA
Message
OPERATING INDIC NOT CORRECT, C/M 1
OPERATING INDIC NOT CORRECT, C/M 2
OPERATING INDIC NOT CORRECT, C/M 3
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User:
N/A
System: N/A
Reference Data
Requirement determined by:
CMASH, CMASI, or
CMASJ
Variable data supplied by: CMASC
Message residence: CMASC
Message issued by: CMASC
Destination
Conversational: Operator's Terminal
Nonconversational: Operator's Terminal
Transmittal technique: I/O instruction used
to access device directly.
SERR MESSAGE xx04 message
Explanation: CHECKER detected an abnormal
condition.
xx
01
D2
D3
D4
D5
Message
UNEXPECTED CPU ERROR-CHECKER
UNEXPECTED MEMORY ERROR-CHECKER
CHKER CANNOT FIND LEGAL PREFIX
CHKER FOUND ERROR IN CST TABLE
TIMEOUT ERROR IN CHKER
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User:
N/A
System: N/A
Reference Data
Requirement determined by:
CMASD
variable data supplied by: CMASC
Message residence: CMASC
Message issued by: CMASC
Destination
Conversational: Operator's Terminal
Nonconversational: Operator's Terminal
Transmittal technique: I/O instruction used
to access device directly.
SERR MESSAGE xx09 message
CMASB
CMASC
Explanation: An unexpected machine check
occurred while C/M 2 was running.
xx
40
80
Message
UNEXPECTED MCI IN CPU-2, C/M 2
UNEXPECTED Mel IN CPU-I, C/M 2
General Messages
561
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data
Requirement determined by: CMASI
Variable data supplied by: CMASC
Message residence:
CMASC
Message issued by: CMASC
Destination
Conversational: Operator's Terminal
Nonconversational: Operator's Terminal
Transmittal technique:
I/O instruction used
to access device directly.
SHARED ACCESS:
number, OWNER:
userid
Explanation: In this case, the user is not the
owner of the data set. The actual owner's
user ID is specified, and the type of access
the sharer has is specified.
System Default Action: continues processing.
Reference Data
Requirement determined by: CZAEL1
Variable data supplied by: CZAEL1
Message residence: CZAELl
Message issued by: CZAEL1
Destination
Conversational: User's Terminal
Nonconversational: Task's SYSOUT
Transmittal technique: GATE
SHARED AT LEVEL number BY userid, ACCESS:
SOLID STORAGE PARITY ERRORS ON PAGE xxxx K
Explanation: A page of core storage has
failed.
In the message xxxx will be
replaced by the decimal representation of
the number of the affected page.
Conversational Action
User: N/A
System:
N/A
Nonconversational Action
User: Call this message to CE's attention.
System: Reconfiguration will determine
whether the system must be restarted or
whether only one user is affected.
In
the first case, Reconfiguration will call
Startup to reinitialize and restart the
system. In the second case, a message
SOFTWARE HAS DETECTED A POSSIBLE HARDWARE
MALFUNCTION will be written on the
affected user's terminals, and the MISSING FOR dsname
Explanation: End of cylinder occurred on the
IPL volume while searching for the data set
name indicated.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: Missing data set must be put on the
IPL volume.
System: Waits for re-IPL of Startup.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: CElAA
Message residence: CElAA
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: operator's Terminal
Transmittal technique: Own I/O routine
••••• SYMBOL name TO BE code NOT FOUND -- ADDRESS
FFFFFOOO ASSIGNED
Explanation: Diagnostic issued when:
(1) "name" not in task dictionary or in any
open program library. or
(2)
"name" in system hash table and
therefore not available. or
(3) "name" found in open program library,
but its containing CSECT was rejected
during the loading process.
Explanation: A CSECT, which is required in
order for Startup to perform its functions,
is not in the data set being processed.
name - the name of the missing CSECT or an
entry name within the missing CSECT.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: Mount a backup SYSRES or restore the
pack and re-IPL.
System: System waits until IPC reinitiated.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: CEIAA
Message residence: CEIAA
Message issued by: CEIAA
Destination N/A
Conversational: N/A
Nonconversational: operator's Terminal
Transmittal technique: Own I/O routine
SYSBLD IN PROGRESS
Explanation: Shortly after the operator
performs the IPL procedure. the CPU enters
the wait state, waiting for the operator to
press REQUEST on the operator's terminal.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User:
Press REQUEST on the operator's
terminal.
System: processing continues.
Reference Data
Requirement determined by: CEIAP
Variable data supplied by: N/A
Message residence: CEIAP
Message issued by: CEIAP
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: Own I/O routine
SYSCCB DSCB NOT FOUND.
name is 8-character symbol in LOAD or CALL
adcon group -- or is primary argument of
LOAD or RUN command. code = CALLED if CALL
adcon group or RUN command; = LOADED if LOAD
adcon group or LOAD command. This condition
causes a load error indication by the
loader.
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data
Requirement determined by: CZCDL
Variable data supplied by: CZCDL
Message residence: CZCDL
Message issued by: CZCDL
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATE
SYMBOL name IS MISSING.
564
STARTUP TERMINATED.
Explanation: The data set control block for
the TSS configuration control block data set
cannot be found in the volume table of
contents of the IPL volume. This is a
system error.
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User:
Mount a backup IPL volume and have a
system programmer run a system edit to
place the configuration control block
data set on the volume from which it is
missing. RE-IPL.
System: system waits for reinitialization.
Reference Data
Requirement determined by: CEIAP
Variable data supplied by: N/A
Message residence: CEIAP
Message issued by: CEIAP
Destination
Conversational: N/A
Nonconversational: operator's Terminal
Transmittal technique: OWn I/O routine
SYSTEM CANNOT PROCEED - NO OPERATING PSA AVAILABLE
Explanation: In a single-CPU system, the page
in core storage that contains the currently
active prefix storage area is
malfunctioning. The alternate PSA is in a
storage element that is partitioned out of
the TSS configuration. and thus is
unavailable. The system is in wait state.
Conversational Action
User: N/A
System~
N/A
Nonconversational Action
User: If possible, set the configuration
console switches to bring into the TSS
domain the SE containing the alternate
PSA for this CPU. Then IPL the system.
Also notify the C.E.s of this machine
failure.
System: System will be restarted.
Reference Data
Requirement determined by: CGCMA
Variable data supplied by: N/A
Message residence: CGCMA
Message issued by: CGCMA
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: Own I/O routine
SYSTEM CANNOT PROCEED - THE ONLY CPU IS
MALFUNCTIONING
Explanation: The only CPU in the TSS
configuration is failing. Operation of the
TSS system is suspended. After this message
is typed the system will go into wait state.
All interrupts are disabled except machine
Checks.
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User: Notify the customer Engineers that
this message has appeared. Follow the
installation's procedures for informing
users that the system has failed.
System: Remains in wait state.
Reference Data
Requirement determined by: CGCMA
Variable data supplied by: N/A
Message residence: CGCMA
Message issued by: CGCMA
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: Own I/O routines
table TABLE REQUIRES MORE CORE THAN IS AVAILABLE
Explanation: This diagnostic is issued when
anyone of three conditions occur:
1.
There is not enough available core for
building the task dictionary table
(TDY). This may happen during IVM or
RESSUP processing when there a.re
malfunctioning pages in core or when
there is not enough total core
available.
2.
A fixed length table within Startup,
which is used to represent the number of
extents in the data set being processed,
is not large enough.
3.
The number of pages set aside in core
for building the TDY heading, hash
tables, and memory map are too few.
This number is determined by STARTUP and
is not to be confused with the number of
pages reserved for the TDY heading area
in virtual memory -- that number will
most likely be greater.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User:
Condition 1: If i t is determined that no
SE's were malfUnctioning, bring an
additional SE into the system partition.
Condition 2: Create an IPL volume with
fewer extents.
Condition 3: Reassemble Startup with a
greater number of pages for the TDY
heading area.
System: System waits until IPL is
reini tiat ed.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: CEIAA
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: Own I/O routine
TASK I/O
xxxx RET
xxxxxxxx
xxxxxxxx
OUTBOARD ERROR ON SOA xxxx LP ccuu EIC
xxxx TS xxxxxxxx xxxxxxxx xxxxxxxx SDB
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
xxxxxxxx xxxxxxxx
Explanation: The system is in the immediate
report mode and a task I/O retry operation
either ended successfully or was completed
with error after a prescribed number of
retries. The variables are taken from the
I/O statistical data table (CHASDT),
representing the following fields of the
statistical data record for the I/O device
in error (all variables are hexadecimal):
SDA - symbolic device address (ADTSDA): LP
- path last used (actual I/O address): cc =
channel uu
unit (SDTLP): EIC - total error
incident count (SDTEIC); RET - total retry
count (SDTRET): TS - time stamp fields
(SDTTSI, SDTTS2, SDTTS3): SDB statistical
data record buckets (SDTSDB).
Conversational Action
User: Follow installation procedures
regarding I/O device failures.
System: continues processing.
Nonconversational Action
User: Follow installation procedures
regarding I/O device failures.
System: Continues processing.
Reference Data
Requirement determined by: CZCRP or CZCZA
Varia.ble data supplied by: CZCRY
Message residence: CHAMCB
Message issued by: CZACA
Destination
=
General Messages
565
Conversational: Operator's Terminal
Nonconversational: Operator's Terminal
Transmittal technique: OWn I/O routine
TASK .ISSUING CANCEL DOES NOT EXIST
Explanation: A CANCEL Command was issued, but
the user was unavailable for system
response.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data
Requirement determined by: CZABA
Variable data supplied by: N/A
Message residence: CZAEA
Message issued by: CZABA
Destination
Conversational: N/A
Nonconversational: operator's Terminal
Transmittal technique: WTL Macro
TASK TERMINATED BECAUSE OF SHUTDOWN.
WILL BE ATTEMPTED.
NO RESTART
Explanation: See text of message.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: Task terminated by LOGOFF.
Reference Data
Requirement determined by: CZABA
Variable data supplied by: N/A
Message residence: CZABA
Message issued by: CZABA
Destination
conversational: N/A
Nonconversational: Task SYSOUT
Transmittal technique: VSEND Macro
TASK TERMINATED BECAUSE OF SHUTDOWN.
BE RESTARTED.
REQUEST WILL
Explanation: See text of message.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: LOGOFF occurs, conditions are set
up so that task will be entered in BATCH
WORD QUEUE at next startup.
Reference Data
Requirement determined by: CZAEA
Variable data supplied by: N/A
Message residence: CZABA
Message issued by: CZABA
Destination
Conversational: N/A
Nonconversational: Task SYSCUT
Transmittal technique: VSEND Macro
TDT HAS INSUFFICIENT SPACE TO LIST ALL VOLUMES.
Explanation: This message will appear if the
catalog exists on more volumes than there
566
are appendages to the catalog JFCB in the
TDT.
(this message will always be preceded
by message WARNING -- COMPRESS CATALOG TO
FEWER VOLUMES.)
Conversational Action
User: N/A
system: N/A
Nonconversational Action
User: To insure full use of the system the
catalog must be compressed to fewer
volumes.
System: Must be reinitiated via IPL of
STARTUP. If the catalog is not
compressed and IPL redone, the entire
catalog will not be listed in catalog
JFCB, i.e., some information in catalog
will be lost.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: N/A
Variable data supplied by: CEIAA
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: Printer
Transmittal technique: Own I/O routine
THE COMPLEX DEF TO xxxxxxxx IN MODULE yyyyyyyy IS
DEFINED BY A COMPLEX DEF.
Explanation: This is a warning. The defining
con.plex DEF is itself defined when this
warning is issued. The result is that the
values of the complex DEF it defines are
resolved correctly. This is, however, a
risky situation since the successful
resolution of the complex DEF to be defined
is always dependent upon the prior
resolution of the defining DEF.
xxxxxxxx - REF name corresponding to the
name of the defining complex DEF.
yyyyyyyy - module in which defining conflex
DEF affears.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: processing continues.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: CEIAA
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: Printer
Transmittal technique: Own I/O routine
'IHE NEW USERID REQUESTED HAS OVER 8 CHARACTERS ERROR.
Explanation: A USERID (DSNAME) for the DSCB's
can only have eight characters. It appears
that the one requested and entered is over
eight. Fix command and re-enter.
Conversational Action
User: Re-enter the whole command.
system: Processing continues.
Nonconversational Action
User: Task deleted.
System: Processing continues.
System Default Action: Terminate compilation.
Reference Data
Requirement determined by: CZCFBl
Variable data supplied by: N/A
Message residence: CZCFBP
Message issued by: GATE (CZAAB)
Destination
Conversational: User's terminal
Nonconversational: Task SYSODT
Transmi ttal technique: GATWR (by means of a
call to the LPC PUTDIAG entry, if in
conversational mode).
THE OPERATORS TERMINAL CANNOT BE ACCESSED.
STARTUP TERMINATED.
Explanation: This message is printed out when,
after ten retries, a message cannot be
successfully put out on the operator's
terminal.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: Call CE to check out and repair
operator's terminal.
System: System waits until IPL is
reinitiated.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: N/A
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: Printer
Transmittal technique: Own I/O routine
THE POD IS INCOMPLETE OR MISSING FOR dsname
Explanation:
One or more partitioned
organization directory (POD) pages are
missing from the extents of a delta (or
system) data set DSCB.
If no POD can be
found (system or delta) comprising initial
virtual storage or the resident supervisor,
startup is terminated; otherwise, startup
cOlltinues.
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User:
Use a different version of the data
set.
System:
N/A
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: CEIAA
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational:
N/A
Nonconversational: Printer
Transmittal technique: Own I/O routine
THE VARIABLE LENGTH ATTRIBUTE OF CSECT xxxxxxxx
WILL BE IGNORED.
Explanation:
If a program module dictionary
(PMD) contains a control section dictionary
(CSD) in which the variable length attribute
bit is set on, that CSECT will be processed
as if it were fixed length.
xxxxxxxx - name of CSECT
Ccnversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: CEIAA
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: Printer
Transmittal technique: Own I/O routine
TO-DEVICE NOT DEFINED.
JOB TERMINATED.
Explanation: The keyword TODEV in the control
statements is not present.
Conversational Action
User:
N/A
System: N/A
Nonconversational Action
User: Correct the control statements,
reload and try again.
System: N/A
Reference Data
Requirement determined by: CEBDP
Variable data supplied by:
N/A
Message residence: CEBDP
Message issued by: CEBDP
Destination
Conversational: N/A
Nonconversational: MSG Device
Transmittal technique:
I/O package for
Independent Utility program
TSS DOiiN; NOTIFY SYSTEM ADMINISTRATOR
Explanation: Recovery Nucleus has come to an
impasse while processing a machine check
interrupt. The alarm bell is also rung and
the system is placed in a manual state loop.
This diagnostic is issued when a table scan
fails, when a sequence of events occurs such
'that meaningful data concerning the original
error is lost, or when the System
Environment Recording and Retry (SERR)
modules cannot be paged from drum.
Conversational Action
User:
If hexadecimal location BF7 contains
X'90' or X'AO', a software limitation has
been reached. The operator may restart
TSS to continue. For all other codes,
the CE should examine the hardware for
malfunctioning units.
System: TSS must be reinitiated. Manual
state loop persists.
Nonconversational Action
User:
If hexadecimal location BF7 contains
X'90' or X'AO', a software limitation has
been reached. The operator may restart
TSS to continue.
For all other codes,
the CE should examine the hardware for
malfunctioning units.
System: TSS must be reinitiated. Manual
state loop persists.
General Messages
567
Reference Data
Requirement determined by: CEAIR
Variable data supplied by: N/A
Message residence: CEAIR
Message issued by: CEAIR
Destination
Conversational: operator's Terminal
Nonconversational: Operator's Terminal
Transmittal technique: Own I/O routine
TSS...... xxxxxx SYMBOLS EXCEED SIZE OF SYMBOL
TABLE. THE NUMBER OF EXCESSIVE SYMBOLS IS yyyyyy.
Explanation: There are too many definitions
(entry name) in the TSS •••••• SYSIVM or
TSS •••••. RESSUP data sets for all. to be
entered in the symbol table buffer area.
The only effect this has on IVM is the fact
that the excessive symbols/values will not
be printed. Since the RESSUP symbol table
is resident in core and is used by STS, the
omission of RESSUP symbols/values may impair
the STS functions.
xxxxxx - SYSIVM or RESSUP
yyyyyy - the number of symbols which will
not be printed (and in the case of RESSUP,
not included in the table>.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: CEIAA
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: Own I/O routine
••••• UNDEFINED REF sname IN MODULE mname.
ADDRESS FFFFFOOO ASSIGNED
Explanation: During the loading of "mname,"
the loader is unable to satisfy a reference
to "sname." It cannot be defined for this
task because either:
a. ·sname is not in task dictionary or in
any open program library, or
b. ·sname" is in the system hash table and
therefore not available to user
authority, or
c. ·sname· was found in an open program
library, but the CSECT containing it was
rejected during the loading process.
ft
This condition causes a load error
indication by the loader.
Conversational Action
User: N/A
System: continue.
Nonconversational Action
User: N/A
System: continue.
Reference Data
Requirement determined by: CZCDL
Variable data supplied ny: CZCDL
Message residence: CZCDL
568
Message issued by: CZCDL
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATE
UNIT PARAMETER MISSING.
REQUEST CANCELLED.
Explanation: Parameter missing or nonexistent.
Processing is terminated.
Conversational Action
User: Re-enter command with correct
parameters.
Reference Data (See Appendix B-2?)
UNKNOWN, COMMAND CANCELED
Explanation: Data set specified by user is not
found in catalog and has not been defined to
the system.
Conversational Action
User: Correct error and enter next command.
System: Returns control to caller.
Nonconversational Action
User: None.
System: Returns control to caller.
System Default Action: N/A
Completion Code: Reg15=X'18'
Dump Code: N/A
Reference Data
Requirement determined by: CZAEJ
Variable data supplied by: CZAEJ
Message residence: SYSMSG
Message issued by: CZAEJ
Destination
Conversational: Terminal
Nonconversational: SYSOUT
Transmittal technique: MSGWR
UNRECOVERABLE READ ERROR FOLLOWING LINE xxxx OF
PARCEL nnnn
Explanation: Unreadable record detected.
Variable information xxxx is the number of
the last line read. Variable information
nnnn is the parcel name.
Conversational Action
User: N/A
System: Index generation terminated.
Nonconversational Action
User: N/A
System: Index generation terminated.
Reference Data
Requirement determined by: CGCKB
Variable data supplied by: CGCKB
Message residence: CGCKB
Message issued by: CGCKB
Destination
Conversational: User's Terminal
Nonconversational: SYSOUT
Transmittal technique: GATWR
USER ATTEMPTS TO RETRIEVE AN ENTITY NOT SHARED BY
HIM
Explanation: The LOCATE module was called to
verify the data set entry and has returned
an error code condition.
Conversational Action
User: Enters next command.
System: continues processing.
Nonconversational Action
User: Task deleted.
system: Continues processing.
Reference Data
Requirement determined by: CZCFBl
Variable data supplied by: NVA
Message residence: CZCFBP
Message issued by: GATE
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATWR, by means of a
CALL to the LPC PUTDIAG entry.
USER HAS REQUESTED INTERVENTION - VOL.
CANCELED.
REQUEST
Explanation:
If, during a request to mount a
specific volume. the user elects the option
to press the attention button. then volume
will not be mounted and task will be
terminated.
Conversational Action
User:
Uses the attention key at his
discretion during volume mounting. The
task will be canceled. though.
System: Processing continues.
Nonconversational Action
User: Task deleted.
System: processing continues.
System Default Action: Terminate compilation.
Reference Data
Requirement determined by: CZCFBl
Variable data supplied by: N/A
Message residence: CZCFBP
Message issued by: GATE (CZAAB)
Destination
Conversational: User's terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATWR (ty means of a
call to the LPC PUTDIAG entry. if in
conversational mode).
USER TASK IS COMPLETE BUT RELEASE OF DEV.
FAILS.
USING
Explanation: When the task is complete and
volumes are cataloged. etc •• the device used
during run will be released.
If an error
condition result is returned. then the above
message will be printed. User's task should
be complete.
Conversational Action
User:
User task is complete - problem is
apparently in system.
System: Processing continues.
Nonconversational Action
User: Task deleted.
System: Processing continues.
System Default Action: Terminate compilation.
Reference Data
Requirement determined by: CZCFBl
Variable data supplied by: N/A
Message residence: CZCFBP
Message issued by: GATE (CZAAB)
Destination
Conversational: User's terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATWR (ty means of a
call to the LFC PUTDIAG entry. if in
conversational mcde).
USER TERMINAL RECEPTION ERROR
Explanation: see text of message.
Conversational Action
User: N/A
System: Task abnormally terminated.
Nonconversational Action
User: N/A
System: N/A
Reference Data
Requirement determined by: CZAAB
Variable data supplied by: N/A
Message residence: CZAAB
Message issued by: CZAAB
Destination
ConVersational: operator's Terminal,
operator's Log
Nonconversational: N/A
Transmittal technique: WTO Macro
USER TERMINAL TRANSMISSION ERROR
Explanation: see text of message.
Conversational Action
User: N/A
System: Task abnormally terminated.
Nonconversational Action
User: N/A
System: NVA
Reference Data
Requirement determined by: CZAAB
Variable data supplied by: N/A
Message residence: CZAAB
Message issued by: CZAAB
Destination
Conversational: operator's Terminal,
Operator's Log
Nonconversational: N/A
Transmittal technique: WTO Macro
USERID user identification NOT JOINED TO SYS.
DATA SET data set name IGNORED-PROG. WILL
CONTINUE.
Explanation: A data set on a disk pack had a
USERID that is not currently in the system.
The user identification and the name of the
data set associated with it are inserted in
the message.
Conversational Action
User:
Processing continues with next data
set.
System: Continues processing.
Nonconversational Action
User: Processing continues with next data
set.
System: Continues processing.
Reference Data
Requirement determined by: CZCFBl
Variable data supplied by: CZCFB
Message residence: CZCFBP
Message issued by: GATE
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATWR (by means of a
CALL to the LPC PUTDIAG entry if in
conversational node).
VALI~ATE THE SYSTEM HARDWARE CONFIGURATION.
OK WHEN LONE.
General Messages
REPLY
569
Explanation: This message is issued every time
the system is started up.
Conversational Action
User: Specified in text.
System: system waits.
Nonconversational Action
User: N/A
System: N/A
Reference Data
Requirement determined by: CZACB
Variable data supplied by: N/A
Message residence: CZACB
Message issued by: CZACB
Destination
Conversational: Operator's Terminal
Nonconversational:
N/A
Transmittal technique: VSEND Macro
VOL.
LABEL ERROR ON sda.
MOUNT CORRECT VOL.
SHOULD BE sda.
IS sda.
Explanation: Wrong volume mounted on specified
device (symbolic device address is given).
The current and correct volume
identifications are both given in this
message to the operator.
Conversational Action
User: Mounts correct volume.
System: Task waits.
Nonconversational Action
User: Mounts correct volume.
System: Task waits.
Reference Data
Requi rement determined by: CZCAC
Variable data supplied by: CZCAC
Message residence: CZCAC
Message issued by: CZCAC
Destination
Conversational: Operator's Terminal
Nonconversational: Operator's Terminal
Transmittal technique: VSEND Macro
VOLUME:
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEVGN
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line W *** ALTERNATE RETURN IN FUNCTION PROGRAM
Explanation: In a FUNCTION subprogram, the
argument list of a FUNCTION or ENTRY
statement contains an asterisk.
line -- seven-digit line number of source
statement in question.
System Default Action: Continue.
Reference Data (Also see Appendix B-22.>
Requirement determined by: CEKBS
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line W
***
ARRAY name USED WITHOUT SUBSCRIPTS
Explanation: A variable name which has been
dimensioned is used without subscription.
name -- An alphameric symbol from the source
program.
line -- seven-digit line number of source
statement in question.
System Default Action: Continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKAI
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
line W •• * seqno CARD OUT OF SEQUENCE
Explanation: Message is produced if a card is
out of sequence when sequence checking is
performed in response to an ISEQ statement.
volid (type)
Explanation: The volume identification (volid)
of the volume on which the data set resides
is specified; the type of volume (2311,
23111, 9-track tape, etc.) is indicated in
parentheses. A separate line is output for
each volume of a multivolume data set.
System Default Action: Continues processing.
Reference Data
Requirement determined by: CZAELl
Variable data supplied by: CZAELl
Message residence: CZAEL1
Message issued by: CZAELl
Destination
Conversational: User's Terminal
Nonconversational: Task's SYSOUT
Transmittal technique: GATE
seqno -- Sequence number of card.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEVRD
Variable data supplied by: CEVRD
Message residence: CEVDX
Message issued by: CEVDX
line W **. type*n CONSTANT EXCEEDS ALLOWABLE
PRECISION
1. Explanation:
line W *** ABSOLUTE ORIGIN.
CURRENT CONTROL SECTION
ASSUMED RELATIVE TO
Explanation: Absolute expression was found in
operand field of ORG.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled subject to reorientation
stated.
570
A REAL*4 constant has more th/in 7
digits, or a REAL*S constant has more than
16 digits. type*n -- REAL*4 or REAL.S.
line -- seven-digit line number of source
statement in question.
System Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKCP
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
2. Explanation: A real constant has appeared
whose magnitude does not lie in the range
between 16- 63 through 16 63 • type*n-REAL*4 or REAL*S
line -- seven-digit line number of source
statement in question.
System Default Action: continue.
Reference Data (Also see Afpendix B-22.)
Requirement determined by: CEKCP
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
line W *** CZ-, CHB- ENTRY STMNT IN NON-PRVLGD,
SYSTEM CSECT
Explanation: The name field of a control
section statement begins with CZ or CHB.
Although the statement has a SYSTEM
attribute, it does not have a PRVLGD
attribute.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEVCT or CEVEY.
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVCX
line -- seven-digit line number of source
statement in question.
number -- decimal number of invalid
continuation cards associated with the given
line number.
Conversation Action
User:
Is given opportunity to correct
source lines or reissue COPY; no
opportunity is given to correct macro
instruction.
System: Awaits response.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEVRD
Variable data supplied by: CEVRD
Message residence: CEVDX
Message issued by: CEVDX
line W *** CONTINUATION LINE EXPECTED.
wILL BEGIN A NEW STATEMENT.
NEW LINE
Explanation: A console line was marked as
being a continuation line and the next line
was a card line, but the card line was not
marked as being a continuation line. The
continuation mark of the console line will
be ignored; the card will be taken as the
first line of a new statement.
line -- SeVen-digit line number of the new
(card) line.
System Default Action: Continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKTC
Variable data supplied by: N/A
Message residence: CEKTC
Message issued by: CEKTH
line W *** name COMMON VARIABLE ON IMPROPER
BOUNDARY.
line W *** CONTINUE STATEMENT AFTER LOGICAL IF
Explanation: A variable in COMMON has been
assigned to a byte address which is not an
integral multiple of the size of the
variable.
name -- An alphameric name from the source
program.
line -- Seven-digit line number of the END
statement of the program.
System Default Action: Continue.
Refer§Pce Data (Also see Appendix B-22.)
Requirement determined by: CEKJC
Variable data supplied by: CEKJH
Message residence: CEKJH
Message issued by: CEKTH
line W *** number CONTINUATION CARDS HAVE
NON-BLANK CHARACTERS BEFORE CONTINUE COLUMN.
CHARACTERS IGNORED.
Explanation: continuation card records
encountered by the assembler have characters
other than blanks or tabs before the
continue column specified on the ICTL
statement (or before column 16 if no ICTL
has been issued). The error may also have
occurred in a COpy or macro-generated
statement; in this case, the line number is
that of the COPY statement of the outermost
macro instruction. If conditional assembly
statements prevent the diagnosed line from
being generated, a warning flag will appear
on the next statement that was generated.
Explanation: A CONTINUE statement appears as
the consequent of a logical IF, making the
IF statement redundant.
line -- seven-digit line number of source
statement in question.
System Default Action: Continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKAT
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line W *** CONTROL FLOWS TO END.
STOP SUPPLIED.
Explanation: The last executable statement of
the program was not an unconditional or
assigned GOTO, an arithmetic IF. a STOP, or
a RETURN. A STOP 'END' statement is
inserted.
line -- Seven-digit line number of END
statement.
System Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKAL
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
0000001 W *** DIAGNOSTIC MODE MAY NOT BE ENTERED
IF NO EDIT OPTIONS ARE REQUESTED.
General Messages
571
Explanation: Diagnostic mode output goes to
the list data set, but a list data set will
not exist unless the user requests at least
one compiler edit option.
line -- seven-digit line number of source
statement in question.
System Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKTA
Variable data supplied by: N/A
Message residence: CEKTA
MeSSage issued by:
CEKTB
9999900 W *** END CARD SUPPLIED BY COMPILER
Explanation: The end of data set was met
before an END card was encountered. The
compiler will supply an END line, card
format.
line -- seven-digit line number of source
statement in question.
System Default Action: Continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKTC
Variable data supplied by: N/A
Message residence: CEKTC
Message issued by:
CEKTH
line W *** ENTRY POINT DECLARED IN CONTROL SECTION
WITHOUT SYSTEM ATTRIBUTE
Explanation: The name of an entry point begins
with SYS but the control section does not
have a SYSTEM attribute.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEVCT or CEVEY
Variable data supplied by: N/A
Message residence:
CEVDX
Message issued by:
CEVDX
line -- seven-digit line number of source
statement in question.
System Default Action: Continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by:
CEKAY
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line w -** name EQUIVALENCE VARIABLE IN COMMON ON
IMPROPER BOUNDARY.
Explanation: A variable which has been placed
in COMMON due to EQUIVALENCE is assigned to
a byte address which is not an integral
multiple of its size.
name -- An alphameric name from the source
program.
line -- seven-digit line number of the END
statement of the program.
System Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKJC
Variable data supplied by: CEKJH
Message residence:
CEKJH
Message issued by: CEKTH
line W *** name EQUIVALENCE VARIABLE ON IMPROPER
BOUNDARY.
Explanation: A non-COMMON variable has been
assigned by EQUIVALENCE to a byte address
which is not an integral multiple of the
variable size.
name -- Alphameric name from the source
program.
line -- Seven-digit line number of the END
statement of the program.
System Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKJC
Variable data supplied by: CEKJH
Message residence: CEKJH
Message issued by: CEKTH
line W *** ENTRY STMNT NOT CZ- OR CBB- IN PRVLGD,
CSECT
SYSTE~
Explanation: The name field of a control
section which has PRVLGD and SYSTEM
attributes does not start with CZ or CBB.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-22.)
Requirement determined by:
CEVCT or CEVEY
Variable data supplied by: N/A
Message residence:
CEVDX
Message issued by:
CEVDX
line W *** EQUIVALENCE GROUP CONTAINS ONLY ONE
NAME
Explanation:
In an EQUIVALENCE statement, a
group enclosed in parentheses contains only
one name.
572
line W *** EXPRESSION CONTAINS EXCESSIVE
PARENTHESES
Explanation:
There are more than 5 levels of
parentheses in an expression.
line -- seven-digit line number of source
statement in question.
System Default Action:
Associated input line
will be assembled.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEVEV
Variable data supplied by:
N/A
Message residence: CEVD~
Message issued by:
CEVDX
line W *** FIRST CHARACTER OF RANGE IS ALSO LAST
Explanation: Both characters in a character
range specification of an IMPLICIT statement
are the same.
line -- seven-digit line number of source
statement in question.
System Default Action: continue.
Reference Data (Also see AFpendix B-22.)
Requirement determined by: CEKBN
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line W *** FLOATING CONTINUATION CHARACTER IS A
ZERO
Explanation: When entering a keyboard input
continuation line, the floating continuation
may be a zero. However, if the line is
later punched and entered in card form, a
continue character of zero will cause the
line to be considered the first line of a
new statement, not a continuation line.
line -- seven-digit line number of source
statement in question.
System Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKTI
Variable data supplied by: N/A
Message residence: CEKTI
Message issued by: CEKTH
line W *** FUNCTION USED AS SUBROUTINE
Explanation: The name of a function which has
been used in an expression is called as a
subroutine in a CALL statement.
line -- seven-digit line number of source
statement in question.
System Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKAI
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
Variable data supplied by:
Message residence: CEKCA
Message issued by: CEKTH
N/A
line W *** INDEXED RETURN IN type PROGRAM
Explanation: This form of the RETURN statement
is valid only when used in a subroutine
subprogram.
type -- MAIN, FUNCTION, BLOCK DATA, or
UNKNOWN
line -- seven-digit line number of source
statement in question.
system Default Action: Continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKBG
Variable data supplied by:
CEKCA
Message residence: CEKCA
Message issued by: CEKTH
line W *** INITIAL VALUE(S) GIVEN FOR name
TRUNCATED TO ALLOCATED SPACE
Explanation: Less than the specified amount of
initial value material is used to initialize
a variable in a TYPE or DATA statement to
avoid exceeding the space allocated to the
variable.
name -- An alphameric name from the source
prograIr,.
line -- seven-digit line number of source
statement in question.
SysteIr, Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKCL
Variable data supplied by:
CEKCA
Message residence: CEKCA
Message issued by:
CEKTH
line W *** name IS ALREADY TYPE type*n
line W *** GOTO STATEMENT MUST NOT END A DO LOOP
Explanation: A GOTO statement appears alone or
with a logical IF as the last statement of a
DO loop.
line -- seven-digit line number of source
statement in question.
System Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKAQ
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line W *** IF STATEMENT MUST NOT END A DO LOOP
EXplanation: An arithmetic IF statement is the
last statement in the range of a DO loop or
is contained in a logical IF which is the
last statement in the DO loop.
line -- seven-digit line number of source
statement in question.
System Default Action: Continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKAR
Explanation: A name that has already been
assigned a type is declared in a TYPE
statement to be of this already assigned
type.
name -- An alphameric name frolt the source
rrogram.
type*n -- LOGICAL*1, LOGICAL*4, INTEGER*2,
INTEGER*4. REAL*4, REAL*S, COMPLEX*S, or
COMPLEX*16
line -- seven-digit line number of source
statement in question.
Systerr Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKAS
Variable data supplied by:
CEKCA
Message residence: CEKCA
Message issued by: CEKTH
line W *** ISD OF OUTPUT MODULE EXCEEDS 256 PAGES
IN LENGTH. ISD NOT PRODUCED.
Explanation: The composite Internal Symbol
Dictionary (ISD) that would be generated by
General Messages
573
the combination of all input modules will
exceed 256 pages (the maximum that can be
PUT using VSAM when the module is stowed in
the desired library).
line -- seven-digit line number of the
source statement in question.
System Default Action: continue.
Reference Data (Also see A~pendix B-22.)
Requirement determined by: CETEN
Variable data supplied by: N/A
Message residence: MSGDIA
Message issued by: CEYER
line W
line W *** LESS THAN DECLARED NUMBER OF SUBSCRIPTS
ON name
Explanation: N array is used with fewer
subscript terms than the declared number of
dimensions.
name -- An alphameric name from the source
program.
line -- seven-digit line number of source
statement in question.
System Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKAG
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
.*.
line W
IS USED
LETTER HAS MULTIPLE DECLARATION.
LAST
Explanation: One or more alphabetic characters
have multiple definitions in an IMPLICIT
statement.
line -- seven-digit line number of source
statement in question.
System Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKBN
Variable data supplied by: N/A
Message residence:
CEKCA
Message issued by: CEKTH
.**
line W
name MACRO NAME REDEFINES MNEMONIC
MACHINE OPERATION
Explanation: See message text. Variable
portion will contain macro name.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEVDF
Variable data supplied by: CEVDF
Message residence: CEVDX
Message issued by: CEVDX
line W
.*.
*..
name MUST NOT BE GIVEN A NEW VALUE
Explanation: A variable in the naroelist
specified for a READ statement is a
currently active DO loop variable, limit, or
step, or has been used as an adjustable
dimension.
line -- seven-digit line number of source
statement in question.
System Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKCF
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
line W
***
NAME FIELD OF TITLE EXCEEDS 4 CHARS
Explanation:
See message text.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEVTI
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line W *** &keyword NESTED KEYWORD OPERAND
NOTA'HON
Explanation: Either a prototype or a macro
instruction keyword operand contain a
keyword followed by a keyword. For example
KEYWORD = KEYWORD = OPTVAL would trigger
this message if found in a macro instruction
operand.
line -- seven-digit line number of source
statement in question.
Systerr, Default Action: Associated input line
will be assembled; second keyword will
become part of first keyword optional or
standard value.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEVPM
Variable data supplied by: CEVPM
Message residence: CEVDX
Message issued by: CEVDX
line W ••• NO FLOW TO THIS STATEMENT
MISSING END STATEMENT
Explanation: Message is produced if an end of
source input occurs before an END statement
is encountered.
574
line -- seven-digit line number of source
statement in question.
System Default Action: An END statement with a
null operand field will be generated and the
assembly will continue.
Reference Data (Also see Appendix E-22.)
Requirement determined by: CEVST
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
Explanation: An executable statement to which
control cannot flow from the preceding
executable statement does not have a
statement number. Furthermore, it cannot be
reached from a remote statement.
line -- seven-digit line number of source
statement in question.
System Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKAJ
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line W••• NON-BLANK STATEMENT NO.
IGNORED.
COLUMNS 1-6
Explanation: A continuation card contains
something other than blanks in columns 1
through 6. These columns are ignored.
line -- seven-digit line number of the first
card of the statement.
System Default Action: Continue (ignoring
columns 1 through 6).
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKTC
Variable data supplied by: N/A
Message residence:
CEKTC
Message issued by: CEKTB
line W ••• NON-COMMON VARIABLES IN BLOCK DATA
SUBPROGRAM.
Explanation: Non-COMMON variables have
appeared in a BLOCK DATA subprogram,
they can serve no useful purpose.
~here
line -- Seven-digit line number of the END
statement of the program.
System Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKJC
Variable data supplied by: N/A
Message residence: CEKJH
Message issued by: CEKTH
**.
line W
NON-STANDARD LANGUAGE FEATURE USED IN
THIS STATEMENT
1. Explanation: Type modifiers or initial value
material appears in a DOUBLE PRECISION
statement.
line -- seven-digit line number of source
statement in question.
System Default Action: Continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKAS
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
2. Explanation: The integer variable specified in
an assigned or computed GOTO statement is an
array.
line -- seven-digit line number of source
statement in question.
System Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKAQ
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
3. Explanation: A -generalized linear" subscript
term has appeared; that is, a subscript term
~hich is not in the form specified by the
FORTRAN language manual, but is a sum of
positive or negative integer constants.
integer variables, and constants times
variables.
line -- seven-digit line number of source
statement in question.
System Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKAG
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
4. Explanation: An array has been used as a
controlled variable in a DO statement or I/O
loop.
line -- seven-digit line number of source
statement in question.
System Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKBA
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
5. Explanation: The integer variable
specification in an ASIGN statement is an
array name.
line -- seven-digit line number of source
statement in question.
systerr, Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKBC
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
6. Explanation: The variable name specified in an
END FILE, REWIND, or BACKSPACE statement to
designate the data set is a dimensioned
variable.
line -- seven-digit line number of source
statement in question.
Systen, Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKBD
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEDTH
7. Explanation: The integer variable used to
designate the data set being referenced in
an I/O statement is an array.
line -- seven-digit line number of source
statement in question.
System Default Action: Continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKBE
Variable data supplied by: N/A
.Message residence: CEKCA
Message issued by: CEKTH
8. Explanation:
PAUSE: The integer constant specified is
larger than 5 digits.
General Messages
575
STOP: An alphameric literal message was
specified in a STOP statement.
RETURN:
a.
The integer variable specified is an
array.
b.
The integer constant specified is O.
c.
The integer variable specified is of
type INTEGER*2.
line -- seven-digit line number of source
statement in question.
System Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CERBS
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CERTH
line W *** OPERAND REQUIRES DOUBLE-WORD BOUNDARY
line -- seven-digit line number of source
statement in question.
System Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKBG
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
9. Explanation: An asterisk and type modifier
follow the function name in a DOUBLE
PRECISION FUNCTION statement.
line -- seven-digit line number of source
statement in question.
System Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKES
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
10. Explanation: An array name has been specified
as a loop limit or step in either a DO or an
I/O statement.
line -- seven-digit line number of source
statement in question.
System Default Action: Continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKJC
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line W *** NON-STANDARD PLACEMENT OF BLOCK DATA
STATEMENT
Explanation: A BLOCK DATA statement appears as
the second statement in a program whose
first statement is an IMPLICIT statement.
line -- seven-digit line number of source
statement in question.
System Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CERBI
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
Explanation: CVD, CVB, STD, STRD, MDD, ADD,
SDD, LD, CD, AD, SD, MD, DD, AW,SW, and LPSW
instructions require
doubleword-boundary-aligned operands.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-22.>
Requirement determined by: CEVMO
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line W *** OPERAND REQUIRES FULL-WORD BOUNDARY
Explanation: ST, N, CL, 0, X, L, C, A, S, M,
D, AL, SL, STE, STRE, LE, CE, AE, SE. ME,
DE, AU, SU, LM, SLT, STMC, and LMC
instructions require fullword-boundaryaligned operands.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEVMO
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line W *** expression OPERAND REQUIRES HALF-WORD
EOUNDARY
Explanation: Relocatable or absolute
expression does not provide an address on a
halfword boundary.
line -- seven-digit line number of source
statement in question.
systeF Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEVEP
Variable data supplied by: CEVEP
Message residence: CEVDX
Message issued by: CEVDX
line W *** OPERAND REQUIRES HALF-WORD BOUNDARY
line W *** NON-STANDARD PLACEMENT OF name
STATElo!ENT
Explanation: A SUBROUTINE or FUNCTION
statement appears second in the program,
preceded by an IMPLICIT statement.
name -- SUBROUTINE or FUNCTION
576
Explanation: STH, EX, BAL, BCT, BC, LH, CH,
AH, SH, ME, BAS, LX, AX, SX, BXH, and BXIE
instructions require
halfword-boundary-aligned operands.
line -- seven-digit line number of source
statement in question.
Systeffi Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEV~O
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVCX
line W
*** PUNCH STATEMENT PRODUCES LISTING ONLY
Explanation: Message is always produced for a
PUNCH statement.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be made ccrrmentary. Assembly will
continue with next statement.
Reference Data (Also see Afpendix B-22.)
Requirement determined by: CEVPH
Variable data supplied cy: N/A
Message residence: CEVDX
Message issued by: CEVDX
line W *** RELOCATABLE ADCON DEFINED IN PUBLIC
CON'l'ROL SEC'l'ION
Explanation: A complex relocatable A- or
y-type adcon was found in a PUBLIC control
section which is not SYSTE~"
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEVAD
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line W
*** REPRO STATEMENT PRODUCES LISTING ONLY
Explanation: Message is always produced for a
REPRO statement.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEVRE
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVCX
line W
*** field SHOULD BE BLANK
1. Explanation: Message is produced if there is a
symbol in the name field. variable portion
will contain NAME.
line -- seven-digit line nUIrber of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEVGL or CEVMC
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
2. Explanation: Message is produced on a TITLE
instruction if the name field is non-blank
and the instruction is not the first TITLE
instruction. Variable portion will contain
NAME.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEVTI
Variable data supplied by: CEVDX
Message residence: CEVDX
Message issued by: CEVDX
line W *** SPECIFIED REGISTER DUPLICATES IMPLICIT
REGISTER
Explanation: The B2 field in an SLT
instruction was 0,1,2,3, or 4.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEVMO
Variable data supplied by: N/A
Message residence: CEVDX
l-lessage issued by: CEVDX
line W
**. name STATEMENT MUST NOT END A DO LOOP
Explanation:
name
See message text.
PAUSE, STOP, or RETURN.
line
seven-digit line number of source
statement in question.
system Default Action: Continue.
Reference Data (Also see Appendix B-22.l
Requirement determined by: CEKBG
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
line W .** (statementno) STATEMENT NUMBER CANNOT
BE REACHED
Explanation: A source statement containing a
statement number has never been referenced
nor can it be reached from the preceding
executable statement.
statementno -- source program statement
number.
line -- Seven-digit line number of the END
statement of the program.
System Default Action: Continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKJB
Variable data supplied by: CEKJH
Message residence: CEKJH
Message issued by: CEKTH
line W .** STATEMENT NUMBER ON STATEMENT FUNCTION
Explanation: A statement number is given on an
apparent statement function definition. An
General Messages
577
ASSIGNMENT statement may appear to be a
statement function definition if its left
side is a subscripted variable for which no
dimensions have been given.
line -- seven-digit line number of source
statement in question.
System Default Action: Continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKBK
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
line W *** SUBPROGRAM name HAS NOT BEEN DECLARED
EXTERNAL
Explanation: A SUbprogram name appearing in an
argument list has not been declared in an
EXTERNAL statement.
name -- An alphameric name from the source
program.
line -- seven-digit line nUIl'ber of source
statement in question.
System Default Action:
Continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKAI
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
line W
***
Explanation: Message is produced if, during
string substitution, the substring notation
is not consistent with the length of the
substring.
line -- seven-digit line number of source
statement in question.
Systerr Default Action: Associated input line
will be assembled.
Reference Data (Also see Appendix B-22.>
Requirement determined by: CEVSS
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line W
LABEL.
***
TAB OR BLANK SHOULD FOLLOW STATEMENT
Explanation: A keyboard line has been entered
in which there is not at least one blank or
tab separating the statement label from the
text of the statement. The corrpilation is
not affected.
line -- seven-digit line number of source
statement in question.
System Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKTI
Variable data supplied by: N/A
Message residence: CEKTI
Message issued by: CEKTH
SUBROUTINE name USED AS FUNCTION
Explanation: The name of a subroutine which
has been called in a CALL statement is used
in an expression as a function name.
name -- An alphameric name from the source
program.
line -- seven-digit line number of source
statement in question.
System Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKAI
Variable data supplied by: CEKCA
Message residence: CEKCA
Message issued by: CEKTH
line W *** SUBSCRIPT NOTATION NOT PERMITTED OR
VALUE TOO HIGH.
Explanation: Message is produced if the N
attribute of a subscripted parameter is
specified or if the value of the subscript
for a subscripted K or N attribute is too
high.
line -- seven-digit line number of source
statement in question.
system Default Action: Associated line will be
assembled and the invalid subscript will be
ignored.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEVEV
Variable data supplied by: N/A
Message residence:
CEVDX
Message issued by: CEVDX
578
line W *** SUBSTRING NOTATION INCONSISTENT WITH
SUBSTRING LENGTH
line W *** THE FOLLOWING REFERENCES ARE RESOLVABLE
FROM SYSLIB-list
Explanation: External references which can be
resolved by modules residing in SYSLIB are
listed.
(The modules are not actually
included in the linkage editor output
module, however.)
list
A list of the module names.
line
Seven-digit line number of
references.
System Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEYEN
Variable data supplied by: CEYEN
Message residence: MSGDIA
Message issued by: CEYER
line W *** THE FOLLOWING EXTERNAL REFERENCES ARE
UNRESOLVED: list
Explanation: The external references cannot be
resolved by information supplied by the user
or by modules in SYSLIB.
list
A list of the unresolved names.
line
Seven-digit line number of
references.
System Default Action: Continue.
Reference Data (Also see Appendix B-22.>
Requirement determined by: CEYEN
Variable data supplied by: CEYEN
Message residence:
Message issued by:
MSGDIA
CEYER
line W *** THE SOURCE LISTING MAY CONTAIN
DUPLICATE LINES. COMPILATION IS NOT AFFECTED.
Explanation: The current statement, associated
diagnostic messages and comment lines
intermixed with the source lines, is of such
a length that an internal buffer has
overflowed and its contents must be added to
the source listing. This may cause several
lines to be duplicated in the source
listing. Compilation is in no way affected.
This message will occur only in
conversational compilations.
line -- seven-digit line number of source
statement in question.
System Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKTL
Variable data supplied by:
N/A
Message residence: CEKTL
Message issued by: CEKTH
line W *** TRUNCATED VALUE
1. Explanation: The value of an adcon was greater
than the text area allocated for it.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled with text truncation of
adcon in error.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEVAD
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
2. Explanation: The length specified by the
length modifier (or the implied length) is
less than the length required to contain the
Significant bits of a constant.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
wil~ be assembled.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEVCS
Variable data supplied by:
N/A
Message residence: CEVI;X
Message issued by: CEVDX
3. Explanation: Either an address constant or ccw
has been processed. The value of the
expressions in the operand fields exceeds
the text area allocated for the operand
field.
line -- seven-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled with zero filled text for
operand field in error.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEVPV
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by:
CEVDX
4. Explanation:
Message is produced if the nureber
of characters in the character string of a
TITLE instruction exceeds 100.
line -- seVen-digit line number of source
statement in question.
System Default Action: Associated input line
will be assembled, and string will be
truncated on the right.
Reference Data (Also see Appendix B-22.)
"equirement determined by: CEVTI
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line W *** VARIABLE LIST DOES NOT MATCH INITIAL
VALUE LIST
Explanation:
In a DATA or TYPE statement,
there is not a one-to-one correspondence
between the list-specified elements and the
constants in the following list of initial
values.
line -- seven-digit line number of source
statement in question.
System Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by:
CEKAH
variable data supplied by: N/A
Message residence:
CEKCA
Message issued by: CEKTH
line W *** VIRTUAL STORAGE EXHAUSTED.
CROSS-REFERENCE LISTING NOT PRODUCED.
Explanation: Self-explanatory.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEYLK
Variable data supplied by: CEYLK
Message residence:
MSGDIA
Message issued by: CEYER
line W *** VIRTUAL STORAGE EXHAUSTED.
PRODUCED.
PMDLIST NOT
Explanation: Virtual storage was not available
for the assembler to produce a PMDLIST.
line -- seven-digit line number of source
statement in question.
System Default Action:
Processing continues,
but the PMDLIST is not produced.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEVPF
Variable data supplied by: N/A
Message residence: CEVDX
Message issued by: CEVDX
line W *** WARNING -- CONTROL SECTION narne1 OF
MODULE name2 REJECTED.
COMMON ATTRIBUTE CONFLICT
Explanation: A common control section was
rejected by the prior occurrence of a
noncommon control section of the same name,
or vice versa.
namel -- Common or noncommon control section
name.
General Messages
579
name2 -- Module name.
line -- seven-digir line number of source
statement in question.
System Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEYLK
Variable data supplied by: CEYLK
Message residence: MSGDIA
Message issued by: CEYER
line w*** WARNING -- CONTROL SECTION narnel OF
MODULE narne2 REJECTED. STORAGE PROTECTION ERROR
POSSIBLE.
Explanation: A non-read-only section was
rejected by a read-only control section, or
a nonprivileged control section was rejected
by a privileged control section.
narnel -- control section name which might
cause storage protection error.
name2 -- Module name.
line -- seven-digit line number of source
statement in question.
system Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEYLK
Variable data supplied by: CEYLK
Message residence: MSGDIA
Message issued by: CEYER
line W *** WARNING -- PRIVILEGED CSECT namel OF
MODULE narne2 REJECTED BY NONPRIVILEGED CSECT
Explanation: A privileged control section was
rejected by the prior occurrence of a
nonprivileged control section of the same
name.
namel -- Control section name of a
privileged control section.
name2 -- Module name.
line -- seven-digit line number of source
statement in question.
System Default Action: Continue.
Reference Data (Also see Afpendix B- 22. )
Requirement determined by: CEYLK
Variable data supplied by: CEYLK
Message residence: MSGDIA
Message issued by: CEYER
line W *** WARNING -- REJECTED CSECT namel OF
MODULE name2 EXCEEDS LENGTH OF PREVIOUS CSECT.
STORAGE PROTECT ERROR POSSIBLE.
Explanation: The length of a rejected control
section exceeded the length of a previously
included control section of the same name.
namel -- Control section name of rejected
CSECT.
name2 -- Module name.
line -- seven-digit line number of source
statement in question.
System Default Action: continue.
580
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEYLK
Variable data supplied by: CEYLK
Message residence: MSGDIA
Message issued by: CEYER
line W *** ZERO STATEMENT NUMBER FIELD IGNORED
Explanation: A statement number of zero is
treated like a blank statement number field.
line -- seven-digit line number of source
statement in question.
System Default Action: continue.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEKAJ
Variable data supplied by: N/A
Message residence: CEKCA
Message issued by: CEKTH
***** WARNING:
COMPLEX DEF snamel IN MODULE
rrname1 IS DEFINED IN TERMS OF ANOTHER COMPLEX
sname2 IN MODULE mname2
Explanation: While loading "mname1,· a complex
def ("snamel") is encountered. Its
associated reference is satisfied by a
complex def ("sname2") in "mname2."
Although the reference is properly
satisfied, link-editing the two modules and
then attempting to load the combined module
will result in a load error. This condition
did not cause a load error indication by the
loader.
Conversational Action
User: N/A
System: ProceSSing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data
Requirement determined by: CZCDL
Variable data supplied by: CZCDL
Message residence: CZCDL
Message issued by: CZCDL
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATE
***** WARNING:
INVALID PAT PAGE ON DEVICE(S):
xxxx
YYYY
(etc. )
Explanation: During a scan of the PAT PAGE(S)
OF AIL ONLINE 2311'S OR 2314'S, ONE OF TEE
FOLLOWING OCCURRED:
1) End of PAT indicator (X'FP') missing or
out of position.
2) PAT self-descriptor entry other than
X'7F' .
3) Relative page 0 entry other than X'CO·.
Conversational Action
User: N/A
System: Processing continues.
Reference Data (Also see Appendix B-22.)
Requirement determined by: CEIAA
Variable data supplied by: CEIAA
Message residence: CEIAA
Message issued by: CElAA
Destination: Operator's terminal
Transmittal technique: Own I/O routine
***** WARNING:
ERRORS
MODULE name PRODUCED WITH LEVEL n
Explanation: This warning message is generated
by the loader when it loads a module. wn indicates the highest level diagnostic
encoun~ered during creation of the module by
the language processor. The message is not
printed for n = O. The loader indicates a
load error when n = 2 or more.
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data
Requirement determined by: CZCDL
Variable data supplied by: CZCDL
Message residence: CZCDL
Message issued by: CZCDL
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATE
WARNING •••
NO DELTA DATA SETS FOUND FOR {RESSUP}
SYSIVM
Explanation: Whenever WALL- is the delta data
set specification and no delta data set
DSCBs are found in theVTOC at the delta
volume for either IVM or RESSUP, a warning
is issued and Startup continues.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: In lieu of delta data sets for IVM
or RESSUP, the system will search for the
data sets names TSS*****.SYSIVM.GOOOOVOO
and TSS*****.RESSUP, GOOOOVOO
respectively. The delta volume will be
searched before the IPL volume.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: CElAA
Message residence: CElAA
Message issued by: CElAA
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: OWn I/O routine
WARNING -- COMPRESS CATALOG TO FEWER VOLUMES.
Explanation: The space available in the TDT
for the addition of volume-appendages is
becoming full. This is a systems warning or
error.
(If this message appears alone, i t
is a warning only.)
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: When time allOWS, the catalog should
be compressed to fewer volumes.
System: catalog is compressed and Startup
is reinitiated by IPL.
Reference Data
Requirement determined by: CEIAA
Variable data supplied by: N/A
Message residence: CElAA
Message issued by: CEIAA
Destination
Conversational: Operator's Terminal
Nonconversational: Operator's Terminal
Transmittal technique: Own I/O routine
YOUR LAST RECORD WAS NOT PROPERLY RECEIVED.
PLEASE REENTER YOUR LAST RECORD.
Explanation: TAM POSTING error recovery
routines issue the message when transmission
of input data is in error, as part of the
recovery mechanism for unit exception.
If
the user has specified the -repeat option,a retry specified in CHASDT is tried.
If
the user does not specify -repeat option,no retry is initiated and the message will
not be issued. The retry value will be the
threshold levels specified in the entry in
CHASDT table for the particular terminal.
Conversational Action
User: The user must reenter his last data
which was input when the terminal was
read.
System: Task waits.
Nonconversational Action
User:
N/A
System: N/A
Reference Data
Requirement determined by: CZCZA
Variable data supplied by: N/A
Message residence: CZCZA
Message issued by: CZCZA
Destination
Conversational: User's Terminal
Nonconversational: N/A
Transmittal technique: Message sent
directly to lOCAL.
YOUR LAST RECORD WAS NOT PROPERLY TRANSMITTEC.
WILL RETRANSMIT YOUR LAST RECORD.
I
Explanation: If there is poor transmission to
a terminal, TAM POSTING will detect it and
reissue the record. The retry attempt is
extracted from CHASDT if the user has
specified the repeat option; otherwise no
retry occurs and the message is not issued.
The retry attempt will be those threshold
values placed in the entry for the
particular terminal in CHASOT. If all
retries should fail, the Abend Required flag
is set in the DECB, and GATE abnormally ends
the task.
Conversational Action
User: N/A
System: N/A
Nonconversational Action
User: N/A
System: N/A
Reference Data
Requirement determined by: CZCZA
Variable data supplied by: N/A
Message residence: CZCZA
Message issued by: CZCZA
Destination
Conversational: User's Terminal
General Messages
581
Nonconversational: N/A
Transmittal technique: Own I/O routine
ZCEF - CHECKSUM ERR HAS CAUSED DELETION OF DATA
SET (data set name)
Explanation: DSCBREC (CZCEF) was unable to
recover from Checksum error.
Conversational Action
System: Return to caller with error code.
Nonconversational Action
System: Same as above for conversational.
Reference Data
Requirement determined by: CZCEFC
Variable data supplied by: CZCEFC
Message residence: CZCEFP
Message issued by: CZCEFC
Destination
Conversational: User's terminal
Nonconversational: SYSOUT
Transmittal technique: GATWR
ZCEF - CHECKSUM ERROR ON SLOT XX, PAGE XXXX,
R.V.N. XX, V.S.N. XXXXXX
Explanation: The caller of CZCEF has
encountered a Checksum error after reading
into VM a DSCB page.
Conversational Action
System: An attempt will be made to recover
the data set.
Nonconversational Action
System: Same as above for conversational.
Reference Data
Requirement determined by: CZCEF
Variable data supplied by:
(caller)
Message residence: CZCEFP
Message issued by: CZCEFC
Destination
Conversational: Operator's and User's
terminals
Nonconversational: operator's terminal
and SYSOUT
Transmittal technique: WTO and GATWR
and SYSOUT
Transmittal teChnique:
ZCEF - RECOVERY SUCCESSFUL.
WTO and GATWR
XXXX PAGES LOST.
Explanation: DSCBREC (CZCEF) has successfully
recovered from a Checksum error.
Conversational Action
System: Return to caller with return code
of • 00' •
Nonconversational Action
System: Same as above for conversational.
Reference Data
Requirement determined by: CZCEFC
Variable data supplied by: CZCEFC
Message residence: CZCEFP
Message issued by: CZCEFC
Destination
Conversational: Operator's and User's
terminals
Nonconversational: operator's terminal
and SYSOUT
Transmittal technique: WTO and GATWR
ZCEK - DSCB PAGE SUCCESSFULLY RELOCATED
Explanation: After PGOUT has encountered an
error while writing a DSCB page, ADDDSCB bas
relocated the DSCB page.
Conversational Action
System: continue processing.
Nonconversational Action
System: Continue processing.
Reference Data
Requirement determined by: CZCEKC
Variable data supplied by: N/A
Message residence: CZCEKP
Message issued by: CZCEKC
Destination
Conversational: Operator's terminal
Nonconversational: Operator's terminal
Transmittal technique: WTO
ZCEK - ERROR WRITING ON VOLUME (vol. I.D.)
ZCEF - RECOVERY IMPOSSIBLE.
XXXX PAGES LOST.
Explanation:
1.
Data set was not duplexed.
2.
Format E DSCB of shared data set was
bad.
3.
Insufficient space to rebuild data set.
4.
Additional write errors encountered.
Comversational Action
System: Return to caller with error code.
Nonconversational Action
System: Same as above for conversational.
Reference Data
Requirement determined ty: CZCEFC
Variable data supplied by: CZCEFC
Message residence: CZCEFP
Message issued by: CZCEFC
Destination
Conversational: Operator's and User's
terminals
Nonconversational: operator's terminal
582
Explanation: A write error was encountered by
PGOUT while writing a PAT or DSCE page to
external storage.
Conversational Action
System:
PAT page - Issue SYSER 080303603 and
continue processing.
DSCE page - Issue SYSER 080303602 and
attempt to relocate page.
Nonconversational Action
System: Same as conversational, above.
Reference Data
Requirement determined by: PGOUT
Variable data supplied by: CHAPVT
Message residence: CZCEKP
Message issued by: CZCEKC
Destination
Conversational: operator's terminal
Nonconversational: operator's terminal
Transmittal technique: WTO
ZCEL - INSUFFICIENT SPACE TO EXPAND DATA SET (data
set name)
Explanation: FINDEXPG was unable to find the
requested number of unused pages.
Conversational Action
System: Return to calling routine with a
code of '04'.
Nonconversational Action
System: Same as conversational, above.
Reference Data
Requirement determined by: CZCELC
Variable data supplied by: CHATDT
Message residence: CZCELP
Message issued by: CZCELC
Destination
Conversational: User's terminal
Nonconversational: SYSOUT
Transmittal technique: GATWR
ZCEL - NO MORE DATA PAGES AVAILABLE ON PUBLIC VOLS
Explanation: FINDEXPG was unable to find
enough unaSSigned pages of public storage.
Conversational Action
System: Return to calling routine with a
code of '04'.
Nonconversational Action
System: Same as conversational, above.
Reference Data
Requirement determined by: CZCELC
Variable data supplied by:
N/A
Message residence: CZCELP
Message issued by: CZCELC
Destination
Conversational: Operator's terminal
Nonconversational: Operator's terminal
Transmittal technique: WTO
ZCEL - UNRECOVERABLE WRITE ERROR ON VOLUME XXXXXX
Explanation: FINDEXPG encountered a nonzero
return code from PGOUT when trying to write
a PAT page.
Conversational Action
System: SYSER 01 and ABEND
Nonconversational Action
System: SYSER 01 and ABEND
Reference Data
Requirement determined by: CEAA1
Variable data supplied by: CHASDA
Message residence: CZCELP
Message issued by: CZCELC
Des'ti na ti on
Conversational: Operator's terminal
Nonconversational: Operator's terminal
TranSlni ttal technique: WTO
ZCEN - DSCB PAGE HAS BEEN SUCCESSFULLY RELOCATED.
Explanation: RELEXPG has relocated a DSCB page
after an unsuccessful attempt to write it
via PGOUT.
Conversational Action
User:
N/A
System: Continue processing.
Nonccnversational Action
User: N/A
System: continue processing.
Reference Data
Requirement determined by: CZCENC
Variable data supplied by: N/A
Message residence: CZCENP
Message issued by: CZCENC
Destination
Conversational: operator's terminal
Nonconversational: Operator's terminal
Transmittal technique: WTO
ZCEN - ERROR WRITING PAT OR OSCB PAGE ON VOLUME
XXXXXX
Explanation: PGOUT has returned with an error
code in register 15 after trying to write a
PAT or DSCB page.
Conversational Action
User: N/A
System: Processing continues. For a DSCB
page, relocation will be attempted after
SYSER.
Nonconversational Action
User: N/A
System: Same as for conversational action,
above.
Reference Data
Requirement determined by: CEAA1
Variable data supplied by: CHAPVT
Message residence: CZCENP
Message issued by: CZCENC
Destination
Conversational: Operator's terminal
Nonconversational: operator's terminal
Transmittal technique: WTO
ZCEN - UNABLE TO RELOCATE DSCB PAGE ON THIS
VOLUME.
Explanation: In trying to relocate a DSCB ~age
after a write error, it is found that (1)
there are already 96 relocations on this
volume, (2) there are no more free pages on
the volume, or (3) another write error has
occurred.
Conversational Action
User: N/A
System: Continue processing.
Nonconversational Action
User: N/A
System: Continue processing.
Reference Data
Requirement determined by: CZCENC or CEAA1
Variable data supplied by: N/A
Message residence: CZCENP
Message issued by: CZCENC
Destination
Conversational: Operator's terminal
Nonconversational: operator's terminal
Transmittal technique: WTO
ZCEW - CHECKSUM ERROR ON VOLUME XXXXXX.
CONTINUES.
PROGRAM
Explanation: WRITDSCB has encountered a
checksum error on a DSCB page.
Conversational Action
System: Processing continues.
Nonconversational Action
System: ProceSSing continues.
Reference Data
Requirement determined by: CZCEWC
Variable data supplied by: CHASDA
Message residence: CZCEWP
Message issued by: CZCEWC
Destination
Conversational: operator's terminal
Nonconversational: Operator's terminal
Transmittal technique: WTO
General Messages
583
ZCEW - DSCB PAGE INDICATED BY THE FOLLOWING
POINTER CANNOT BE FOUND. XXXXXXXX
Explanation: DSCB pointer indicates an error
page and a relocation entry cannot be found.
Conversational Action
System: Call to SYSER 04 and ABEND.
Nonconversational Action
System: Call to SYSER 04 and ABEND.
Reference Data
Requirement determined by: CZCEWC
Variable data supplied by: CZCEWC
Message residence: CZCEWP
Message issued by: CZCEWC
Destination
Conversational: Operator's terminal
Noneonversational: Operator's terminal
Transmittal technique: WTO
ZCEW - ERROR WRITING DSCB PAGE ON VOLUME XXXXXX.
PAGE SUCCESSFULLY RELOCATED.
Explanation: PGOUT encountered an error
writing a DSCE page but WRITDSCB has
relocated it.
Conversational Action
System: Processing continues after SYSER
Explanation: A DSCB pointer indicates a page
that is too large to exist on the indicated
device.
Conversational Action
System: SYSER 01 and ABEND.
Nonconversational Action
System: SYSER 01 and ABEND.
Reference Data
Requirement determined by: CZCEWC
Variable data supplied by: CHASDA
Message residence: CZCEWP
Message issued by: CZCEWC
Destination
Conversational: operator's terminal
Nonconversational: Operator's terminal
Transmittal technique: WTO
ZCEW - UNRECOVERABLE CHECKSUM ERROR ON VOLUME
XXXXXX
Explanation:
1.
2.
02.
Nonconversational Action
System: Processing continues after SYSER
3.
Checksum error found on format 'E' DSCB
of a shared data set.
Return from DSCBREC with a nonzero
return code.
Two Checksum errors in a row.
02.
Reference Data
Requirement determined by: CZCEWC
Variable data supplied by: CHASDA
Message residence: CZCEWP
Message issued by: CZCEWC
Destination
Conversational: operator's terminal
Nonconversational: Operator's terminal
Transmittal technique: WTO
ZCEW - ERROR WRITING DSCB PAGE ON VOLUME XXXXXX.
UNABLE TO RELOCATE DSCB PAGE.
Explanation: PGOUT encountered an error
writing a DSCB page and WRITDSCB could not
successfully relocate it.
Conversational Action
System: ABEND
Nonconversational Action
System: ABEND
Reference Data
Requirement determined by: CZCEWC
Variable data supplied by: CHASDA
Message residence: CZCEWP
Message issued by: CZCEWC
Destination
Conversational: Operator's terminal
Nonconversational: Operator's terminal
Transmittal technique: WTO
ZCEW - PAGE NO.
XXXXXX
584
BEYOND DEVICE LIMITS FOR VOLUME
Conversational Action
System: Call to SYSER 03 and ABEND.
Ncnconversational Action
System: Call to SYSER 03 and ABEND.
Reference Data
Requirement determined by: CZCEWC
Variable data supplied by: CHASDA
Message residence: CZCEWP
Message issued by: CZCEWC
Destination
Conversational: Operator's terminal
Nonconversational: Operator's terminal
Transmittal Technique: WTO
ZCOX001 START PRESENT POD DUMP
Explanation: Beginning of present POD dump.
Conversational Action
User: N/A
System: Processing continues.
Nonconversational Action
User: N/A
System: Processing continues.
Reference Data
Requirement determined by: CZCOX
Variable data supplied by: N/A
Message residence: CZCOX
Message issued by: CZCOX
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATWR
PART V:
SECTION 1:
TIME SHARING SUPPORT SYSTEM
TIME SHARING SUPPORT SYSTEM MESSAGES
identification: symbolic device address, seek
address, physical path, CSW, PSW, sense data.
MESSAGE DESCRIPTION
TSSS messages are written at the System
programmer's terminal, with the exception of
Messages OOD and OOE. Nearly all of these
messages are the result of error conditions
encountered by the program. No prompting or
confirmation messages are issued; no messages
require a predetermined response from the System
Programmer.
There are four message classes, each of which
is used to specify a particular type of error
condition:
• Class 0 messages result from errors detected
by the RSS or VSS I/O system.
• Class 1 messages result from System Programmer
errors.
• Class 2 messages result from system errors;
these may be either TSSS logic errors or
TSS/360 errors such as inaccurate tables.
• Class 3 messages result from failure of the
RSS load or unload function.
In almost all cases, detection of an error that
causes a message to be written also causes the
current operation to be canceled. Depending on
the type, severity, and location of the error, a
different operation may subsequently be
successful.
The out.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHCF
Variable data supplied by: CEHCF
Explanation: The table entry contains
incompatible or meaningless data.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEBEA
Variable data supplied by: CEHEA
CEHEAOOF NO PHYSICAL PATH EXISTS
Explanation: The SSDAT does not define a
physical path for a given symbolic device
address.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEBEA
Variable data supplied by: CEHEA
CEHEAOOO INVAL OPERATION FOR DEVC
Explanation: I/O system was requested to
perform an impossible operation such as
reading a printer.
System Action: standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHEA
Variable data supplied by:
CEHEA
CEHEAOOl DEVICE NOT SUPPORTED
Explanation: Self-explanatory.
SysteIri Action: Standard.
Reference Data (Also see Appendix B-23.)
Section 2:
TSSS Messages
587
Requirement determined by:
Variable data supplied by:
CEHEA
CEBEA
CEBEA002 INVALID LENGTH SPECIFIED
Explanation: Module requesting I/O specified
invalid length parameter.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEBEA
Variable data supplied by: CEBEA
CEBEA004 NO SSDAT DEVICE ENTRY
Explanation: Requested device not represented
in SSDAT.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHEA
Variable data supplied by: CEHEA
CEHEA005 PAGE BOUNDRY VIOLATION
Explanation: Data crosses page boundry on
single I/O request.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHEA
Variable data supplied by: CEHEA
CEHEB003 DEVICE NOT OPERATIONAL
Explanation: Condition code 3 received when
start I/O executed.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHEB
Variable data supplied by: CEHEB
CEBEB009 LOAD REAL ADDRESS FAILED
Explauation: Hardware failure of LRA
instruction (RSS only).
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHEB
Variable data supplied by: CEHEB
CEHFAOOO INVAL OPERATION FOR DEVC
EXplanation:
I/O system was requested to
perform an impossible operation, such as
reading a printer.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHFA
Variable data supplied by: CEHFA
CEHFAOOl DEVICE NOT SUPPORTED
EXplanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEBFA
Variable data supplied by: CEHFA
588
CEHFA002 INVALID LENGTH SPECIFIED
Explanation: Module requesting I/O specified
invalid length parameter.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHFA
Variable data supplied by: CEBFA
CEHFBOOO INVAL OPERATION FOR DEVC
Explanation: I/O system was requested to
perform an impossible operation. such as
reading a printer.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHFB
Variable data supplied by: CEBFB
CEHFE002 INVALID LENGTH SPECIFIED
Explanation: Module requesting I/O specified
invalid length parameter.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHFB
Variable data supplied by: CEHFB
CEHFB010 CHANNEL PROG EXCEEDS MAX
Explanation: The number of CCWs required to
fulfill the I/O request is greater than
available space for building the channel
program.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEBFB
Variable data supplied by: CEHFB
CEHFCOOA INVAL FORMS MOTION BYTE
EXplanation: First byte in a print line is not
valid as TSSS carriage control data.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHFC
Variable data supplied by: CEBFC
CEHFCOOO INVAL OPERATION FOR DEVC
Explanation: IIO system was requested to
perform an impossible operation, such as
reading a printer.
Systen Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHFC
Variable data supplied by: CEHFC
CEHFCOOl DEVICE NOT SUPPORTED
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHFC
Variable data supplied by: CEHFC
CEHFC002 INVALID LENGTH SPECIFIED
EXplanation: Module requesting I/O specified
invalid length parameter.
system Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHFC
Variable data supplied by: CEHFC
CEHFDOOO INVAL OPERATION FOR DEVC
Explanation: I/O system was requested to
perform an impossible operation, such as
reading a printer.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHFD
Variable data supplied by: CEHFD
Requirement determined by:
Variable data supplied by:
CEHGB
CEHGB
CEHGC006 PERMANENT I/O ERROR
Explanation: Error recovery retry attempts
have failed, or CSW indicates unrecoverable
error.
System Action: Standard, in most cases.
If
the failing device is the input device while
in call mode (card reader or tape drive),
the terminal becomes the input device again.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHGC
Variable data supplied by: CEHGC
CEHFDOOl DEVICE NOT SUPPORTED
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHFD
Variable data supplied by: CEHFD
CEHFD002 INVALID LENGTH SPECIFIED
EXplanation: Module requesting I/O specified
invalid length parameter.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHFD
Variable data supplied by: CEHFD
CEHFD010 CHANNEL PROG EXCEEDS MAX
Explanation: The number of COWs required to
fulfill the I/O request is greater than
available space for building the channel
program.
system Action: standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHFD
Variable data supplied by: CEHFD
CEHGt006 PERMANENT I/O ERROR
Error recovery retry attempts
have failed, or CSW indicates unrecoverable
error.
System Action: Standard, in most cases. If
the failing device is the input device while
in call mode (card reader or tape drive),
the terminal becomes the input device again.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHGD
Variable data supplied by: CEHGD
~lanation:
CEHGE006 PERMANENT I/O ERROR
Explanation: Error recovery retry attempts
have failed, or CSW indicates unrecoverable
error.
System Action: Standard, in most cases.
If
the failing device is the input device while
in call mode (card reader or tape drive),
the terminal becomes the input device again.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHGE
Variable data supplied by: CEHGE
CEHGE007 SYSTEM LOGIC ERROR
CEHGA006 PERMANENT I/O ERROR
EXplanation: Error recovery retry attempts
have failed, or CSW indicates unrecoverable
error.
User: N/A
system Action: Standard, in most cases. If
the failing device is the input device while
in call mode (card reader or tape drive),
the terminal becomes the input device again.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHGA
Variable data supplied by: CEHGA
CEHGB006 PERMANENT I/O ERROR
Explanation: Error recovery retry attempts
have failed, or CSW indicates unrecoverable
error.
system Action: Standard, in most cases. If
the failing device is the input device while
in call mode (card reader or tape drive),
the terminal becomes the input device again.
Reference Data (Also see Appendix B-23.)
Explanation: An internal logic error has
occurred in TSSS. Should not happen.
System Action: standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHGE
Variable data supplied by: CEHGE
CEHJA20E AT SVC PSW FOLLOWS
Explanation: This message immediately follows
Message wmoduleid201 ••• or Message
"moduleid208 ••• w. This message may also
follow the diagnostic message that is issued
when a system attempt to remove an AT is
unsuccessful (see Message w moduleid208 ••• w.
In each case, the AT can be identified by
the instruction address in the PSW (VPSW in
VSS> that is written immediately following
this message.
System Action: An implied RUN is executed.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHJA
Variable data supplied by: CEHJA
Section 2:
TSSS Messages
589
CEBJA200 AT RELOCATION AREA OVFLO
Explanation: The eight AT relocation areas for
this type of AT are all locked, and an
attempt was made to use them. See Appendix
D, IBM System/360 Time Sharing System: Time
Sharing Support System, GC28-2006, for a
definition of the AT relocation areas and a
description of their use.
System Action: The System Programmer's
terminal is solicited for input. A recovery
attempt can be made (see Appendix D, IBM
System/360 Time Sharing System: Time
Sharing Support System, GC28-2006).
Alternatively, other commands can be issued.
However, any ATs that reference the locked
AT relocation area cannot be executed; if
encountered, those ATs will cause this
message to be issued.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHJA
Variable data supplied by: CEHJA
CEBJA201 UNEXPECTED 'AT' SVC
Explanation: A spurious AT SVC execution
occurred, for which there is no entry in the
AT Table.
System Action: After this message is printed,
message "moduleid20E •••• and the
accompanying PSW are printed, followed by an
implied RUN at the instruction address
following the spurious AT SVC.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHJA
Variable data supplied by:
CEHJA
Explanation: The $PATCH system symbol's
parameter does not specify a valid patch
location.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHJF
Variable data supplied by: CERJF
CEHJFI02 'AT' AT THIS LOCATION
Explanation: The $AT system symbol's parameter
does not specify a valid AT location.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEBJF
Variable data supplied by: CEHJF
CEHKAI0E INVALID MEMORY QUALIFIER
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKA
Variable data supplied by: CEHKA
CERRAI06 UNDEFINED SYMBOL
Explanation: Search of appropriate symbol
tables found no match.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CERRA
Variable data supplied by: CEHKA
CEHKAI07 WRONG NO. OF PARAMETERS
CEBJA208 ERROR CONn-'AT' REMOVED
Explanation:
(1) If this message was
immediately preceded by another message, a
system error detected during AT processing
caused the previous message to be written;
the offending AT has now been removed.
(RSS
only) (2) If this message is written without
another diagnostic message immediately
preceding it, it means that a branch or LPSW
instruction overlaid by an AT SVC could not
be simulated after the associated dynamic
statement was executed. The AT has been
removed.
System Action: Message "moduleid20E AT SVC PSW
FOLLOWS" is written, and an implied run is
executed. Note that in the case described
by explanation (2), a program check can be
expected upon execution of the previously
overlaid instruction.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CERJA
Variable data supplied by: CEHJA
CEHJFI0E INVALID MEMORY QUALIFIER
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEBJF
Variable data supplied by: CEHJF
CEHJFI0l NO 'PATCH' AT THIS LOG
590
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKA
Variable data supplied by: CEHKA
CEHKAI1A 'AT' TABLE OVERFLOW
ExPlanation: Self-explanatory; possibly a
shorter dynamic statement would be accepted.
System Action: AT command rejected; input
device is read again.
Reference Data (Also see Appendix B-23.)
Requirement determined by:
CERRA
Variable data supplied by: CEHKA
CEHKAl19 INVALID 'AT' LOCATION
Explanation: An excluded instruction resides
at specified location.
System Action: AT command rejected; input
device is read again.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKA
Variable data supplied by: CERRA
CEHKCI06 UNDEFINED SYMBOL
Explanation: Search of appropriate symbol
tables found no match.
Systexr. Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by:
Variable data supplied by:
CEHKC
CEHKC
CEHKC107 WRONG NO. OF PARAMETERS
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKC
Variable data supplied by: CEHKC
CEHKC122 COLLECT PARAH 1 INVALID
Explanation: The parameter that specifies the
collection area in a COLLECT command operand
is invalid.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKC
Variable data supplied by: CEHKC
CEHKC124 OVERFLOW CONDITION
Explanation: Either truncation was performed
during execution of a SET or COL,LECT
command, or a fixed-point overflow exception
resulted from an arithmetic operation.
System Action: processing continues as if no
error occurred.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKC
Variable data supplied by: CEHRC
CEHKD10D INVALID $DOUT DEVICE
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKD
Variable data supplied by: CEHRD
CEHKDI0E INVALID MEMORY QUALIFIER
Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKD
Variable data supplied by: CEHKD
Explan~tion:
CEHKD107 WRONG NO. OF PARAMETERS
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKD
Variable data supplied by: CEHKD
CEHKI:l1C INVALID RECORD ADDRESS
Explanation: Self-explanatory; this occurs
when a dump or display involves reading from
a direct access device.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEBED
Variable data supplied by: CEHKD
CEHKD121 SP ATTENTION RECEIVED
Explanation: An ATTENTION by the System
Programmer, issued while RSS or VSS was
executing, is acknowledged.
System Action: The interrupt may have caused a
aisp~ay or dump to be terminated; see
-DISPLAY Command- and -DUMP Command. w The
System programmer's terminal is solicited
for input.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKD
Variable data supplied by: CEBED
CEHKD128 DUMPED TO tape address EOR
Explanation: DUring execution of the DUMP
co:mmand when the output device is a tape
drive, the end of the tape reel has been
reached.
tape address -- eight-digit hexadecimal
number represents the storage address of the
last byte of data written to the tape.
System Action: Standard. If the remainder of
the dump is to be written, the reel should
be changed on the current output device (or
the value of $DOUT changed) and a new DU~P
command issued.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKD
Variable data supplied by: CEHRD
CEHKC206 INVALID SCE TYPE
CEHKDI05 INVALID DEVICE SPECIFIED
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKD
Variable data supplied by: CEHRD
Explanation: Internal logic error; detected
during language processing.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEBRD
Variable data supplied by: CEHRD
CEHKE103 UNDEFINED ALIAS SYMBOL
CEHKDI06 UNDEFINED SYMBOL
Explanation: Search of appropriate symbol
tables found no match.
System Action: standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CERKD
Variable data supplied by: CEHKD
Explanation: The symbol used as the second
parameter in format 2 of the DEFINE com~and
cannot be resolved.
System Action: standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CERKE
Variable data supplied by: CEHKE
Section 2:
TSSS Messages
591
CEHKE107 WRONG NO. OF PARAMATERS
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEBKE
Variable data supplied by: CEHKE
CEHKEI08 SP SYMBOL TABLE FULL
Explanation: Self-explanatory. If this was a
format 1 use of the DEFINE command, there
may be sufficient space for a format 2
DEFINE command or a format 1 command that
requests less storage.
System Action: DEFINE command rejected. The
input device is read again.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKE
Variable data supplied by: CEBKE
CEHKLl1D IMPROPER CALL COMMAND
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKL
Variable data supplied by: CEBKL
CEHKL11F END COMMAND INVALID
Explanation: Incorrect use of the END command.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKL
Variable data supplied by: CEHKL
CEHKMI07 WRONG NO. OF PARAMETERS
EXplanation: Self-explanatory_
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKM
Variable data supplied by: CEHKM
CEHKNI07 WRONG NO. OF PARAMETERS
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKN
Variable data supplied by: CEBKN
Requirement determined by:
Variable data supplied by:
CEHKP
CEHKP
CEHKPl15 PATCH TABLE OVERFLOW
Explanation: Self-explanatory: possibly a
shorter patch will be accepted.
system Action: PATCH command rejected; input
device is read again.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKP
Variable data supplied by: CEHKP
CEHKPl16 REDUNDANT PATCH
Explanation: A patch already exists at
specified location.
System Action: PATCH command rejected; input
device is read again.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKP
Variable data supplied by: CEHKP
CEBKQIOE INVALID MEMORY QUALIFIER
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKQ
Variable data supplied by: CEHKQ
CEHKQI07 WRONG NO. OF PARAMETERS
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CERRQ
Variable data supplied by: CEHKQ
CEHKQ109 INVALID TASK ID
Explanation: The task identification number
supplied with a CONNECT or QUALIFY command
was not found in a search of the TSI ch~in
(RSS only).
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKQ
Variable data supplied by: CEHKQ
CEHKR10E INVALID MEMORY QUALIFIER
CEHKPI06 UNDEFINED SYMBOL
Explanation: Search of appropriate symbol
tables found no match.
system Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEBKP
Variable data supplied by: CEHKP
CEHKPI07 WRONG NO. OF PARAMETERS
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
592
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKR
Variable data supplied by: CEHKR
CEHKRI06 UNDEFINED SYMBOL
Explanation: Search of appropriate symbol
tables found no match.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKR
variable data supplied by: CEHKR
CEHKRI07 WRONG NO. OF PARAMETERS
EXplanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requi rement determined by: CEHKR
Variable data supplied by: CEHKR
CEBKRIIE INVALID REMOVE OPERAND
Explanation: Operand not $AT or $PATCH, or
accompanying parameter is invalid.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKR
Variable data supplied by: CEHKR
CEHKSOOO INVAL OPERATION FOR DEVC
EXplanation: 1/0 system was requested to
perform an impossible operation, such as
reading a printer.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKS
Variable data supplied by: CEHKS
CEBKSI0C INVALID CPU SPECIFIED
Explanation: Incorrect specification of a
parameter with the $RM system symbol.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKS
Variable data supplied by: CEHKS
CEBKSI0E INVALID MEMORY QUALIFIER
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKS
Variable data supplied by: CEHKS
Requirement determined by:
Variable data supplied by:
CEBXS
CEHKS
CEHKS124 OVERFLOW CONDITION
Explanation: Either truncation was performed
during execution of a SET of COLLECT
command, or a fixed-point overflow exception
resulted from an arithmetic operation.
System Action: ProceSSing continues as if no
error occurred.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKS
Variable data supplied by: CEHKS
CEBKS126 ATTRIBUTE ERROR
Explanation: One or more parameters
incorrectly specified with immediate
attribute designation.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKS
Variable data supplied by: CEHKS
CEHKTl07 WRONG NO. OF PARAMETERS
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKT
Variable data supplied by: CEHKT
CEHKWI04 TSP ALREADY CONNECTED
Explanation: The operand of a CONNECT command
specifies a task to which a TSP is already
connected (RSS only).
System Action: CONNECT command is rejected;
the MSP input device is read again.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKW
Variable data supplied by: CEHKW
CEHKW205 SCB COUNT IN ERROR
CEHKSI06 UNDEFINED SYMBOL
Explanation: Search of appropriate system
tables found no match.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKS
Variable data supplied by: CEHKS
Explanation: Language processing has detected
an invalid count of Symbol Control Blocks.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHKW
Variable data supplied by: CEHKW
CEBLAI0B INVALID $ID PARAMETER
CEHKSI07 WRONG NO. OF PARAMETERS
EXplanation: Self-explanatory.
system Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEBKS
Variable data supplied by: CEBKS
CEHKS123 INVALID LENGTH
Explanation: More than 4096 bytes specified by
a SET, PATCH, or COLLECT command.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Explanation: A dictionary search failed to
find an appropriate symbol.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHIA
Variable data supplied by: CEHLA
CEHLAIOF BAD PARAM: OPERATION DONE
Explanation: Operation requested was
incorrectly specified but performed anyway.
Result may be unpredictable.
System Action: Standard.
Section 2:
TSSS Messages
593
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHLA
Variable data supplied by:
CEHLA
CEHLAlOO INVAL SYST SYMBOL PARAM
Explanation: Parenthesized parameter of a
system symbol is incorrectly specified.
Does not apply to $RM or $VM.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHLA
Variable data supplied by:
CEHLA
CEHLAI06 UNDEFINED SYMBOL
Explanation: Search of appropriate symbol
tables found no match.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHLA
Variable data supplied by: CEHLA
CEHLA127 RANGE OPERATOR IN ERROR
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHLA
Variable data supplied by:
CEHLA
CEHLA20C SYSTEM LOGIC ERROR
Explanation: An internal logic error has
occurred in TSSS. Should not happen.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHLA
Variable data supplied by: CEHLA
CEHLC114 INPUT STRING TOO LONG
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHLC
Variable data supplied by:
CEHLC
CEHLAI07 WRONG NO. OF PARAMETERS
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHLA
Variable data supplied by: CEHLA
CEHLAl18 INVALID RM ADDRESS
Explanation: A segment 0 or 1 address cannot
be resolved with the RSS page tables.
System Action: Standard.
System: N/A
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHLA
Variable data supplied by: CEHLA
CEHLLI06 UNDEFINED SYMBOL
Explanation: Search of appropriate symbol
tatles found no match.
Systerr Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHLL
Variable data supplied by:
CEHLL
CEHLLlll INVALID LITERAL
Explanation:
Incorrect specification of a
literal, which can include wL-notation. w
Systerr Action: standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHLL
Variable data supplied by:
CEHLL
CEHLA120 IMPROPER SUBSCRIPT
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHLA
Variable data supplied by: CEHLA
CEHLA125 IMPROPER IF
Explanation:
The logical expression that
constitutes the IF operand cannot be
evaluated as either true or false.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHLA
Variable data supplied by: CEHLA
CEHLA126 ATTRIBUTE ERROR
Explanation: One or more parameters
incorrectly specified with immediate
attribute deSignation.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHLA
Variable data supplied by:
CEHLA
594
CEHLL124 OVERFLOW CONDITION
Explanation: Either truncation was performed
during execution of a SET or COLLECT
corr,mand, or a fixed-point overflow exception
resulted from an arithmetic operation.
Systel£ Action: processing continues as if no
error occurred.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHLL
Variable data supplied by: CEHLL
CEHLPI1B INVALID INPUT CHARACTER
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHLP
Variable data supplied by: CEHLP
CEHLP111 INVALID LITERAL
Explanation:
Incorrect specification of a
literal, which can include "L-notation."
Systerr Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHLP
Variable data supplied by: CEHLP
Explanation: Invalid relative page for 2301
drum eRSS only).
System Action: standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHRT
Variable data supplied by: CZHRT
CEBLP112 INVALID SYMBOL
Explanation: A symbol contains an invalid
character or too many characters.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHLP
Variable data supplied by: CEHLP
CZHRT20B ADDR EXCEEDS 2311 RANGE
Explanation: Invalid relative page for 2311
disk (RSS only).
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHRT
Variable data supplied by: CZHRT
CEHLP113 INCORRECT SYNTAX
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHLP
Variable data supplied by: CEHLP
CEHLS20D SYSTEM LOGIC ERROR
Explanation: An internal logic error has
occurred in TSSS. Should not happen.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHLS
Variable data supplied by: CEHLS
CEHLS205 SCB COUNT IN ERROR
Explanation: Language processing has detected
an invalid count of Symbol control Blocks.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHLS
Variable data supplied by: CEHLS
CEID1A118 INVALID RM ADDRESS
Explanation: A segment 0 or 1 address cannot
be resolved with the RSS page tables.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHMA
Variable data supplied by: CEH~~
CEHMS112 INVALID SYMBOL
Explanation: A symbol contains an invalid
character or too many characters.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: CEHMS
Variable data supplied by: CEH~S
CZHNPI0A INVALID VM ADDRESS
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHNP
Variable data supplied by: CZHNP
CZHRT20A ADDR EXCEEDS 2301 RANGE
CZHRT20C ADDR EXCEEDS 2314 RANGE
Explanation: Invalid relative page for 2314
disk (RSS only).
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHRT
Variable data supplied by: CZHRT
CZHRT202 DEVICE NOT IN SSDAT
Explanation: A routine seeking a symbolic
device address in the SSDAT found no entry
for the device.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHRT
Variable data supplied by: CZHRT
CZHRT209 INVALID PAGING DEVC TYPE
Explanation: Self-explanatory (RSS only).
System Action: standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHRT
Variable data supplied by: CZHRT
CZHSAOOC INVALID SSDAT ENTRY
Explanation: The table entry contains
incompatible or meaningless data.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHSA
Variable data supplied by: CZHSA
CZHSAOOF NO PHYSICAL PATH EXISTS
Explanation: The SSDAT does not define a
physical path for a given sYllbolic device
address •
.§.y§tero Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by:
CZHSA
Variable data supplied by: CZHSA
CZHSAOOO INVAL OPERATION FOR DEVC
Explanation: I/O system was requested to
perform an impossible operation, such as
reading a printer.
System Action: standard.
Section 2:
TSSS Messages
595
Reference Data (Also see A~pendix B-24.)
Requirement determined by: eZHSA
Variable data supplied by: CZHSA
Requirement determined by:
Variable data supplied by:
eZHSB
CZHSB
CZHSB008 DEVICE NOT ALLOCATED
CZHSAOOl DEVICE NOT SUPPORTED
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHSA
Variable data supplied by: CZHSA
CZHSA002 INVALID LENGTH SPECIFIED
Explanation: Module requesting I/O specified
invalid length parameter.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHSA
Variable data supplied by: CZHSA
Explanation: Program check, interruption code
x'30', received (VSS only).
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHSB
Variable data supplied by: CZHSB
CZHTAOOO INVAL OPERATION FOR DEVe
Explanation: I/O system was requested to
perform an impossible operation, such as
reading a printer.
system Action: Standard.
Reference Data (Also see Appendix B-24:)
Requirement determined by: CZHTA
Variable data supplied by: CZHTA
eZHSA004 NO SSDAT DEVICE ENTRY
CZHTA003 DEVICE NOT SUPPORTED
Explanation: Requested device not represented
in SSDAT.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: eZHSA
Variable data supplied by: CZHSA
eZHSA005 PAGE BOUNDRY VIOLATION
Explanation: Data crosses page toundry on
single I/O request.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHSA
Variable data supplied ty: CZHSA
CZHSBOOB PAGELST ENTRIES EXCEED 8
Explanation: Requested channel program exceeds
TSS/360 limitation of eight entries in page
table in IOReB (VSS only).
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHSB
Variable data supplied by: CZHSB
eZHSB006 PERMANENT I/O ERROR
Explanation: Error recovery retry attempts
have failed, or CSW indicates unrecoverable
error.
System Action: Standard, in most cases. If
the failing device is the input device while
in call mode (card reader or tape drive),
the terminal becomes the input device again.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHSB
Variable data supplied by: CZHSB
CZHSB007 SYSTEM LOGIC ERROR
Explanation: An internal logic error has
occurred in TSSS. Should not happen.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
596
Explanation: self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHTA
Variable data supplied by: CZHTA
CZHTA002 INVALID LENGTH SPECIFIED
Explanation: Module requesting I/O specified
invalid length parameter.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHTA
Variable data supplied by: CZHTA
CZHTEOOO INVAL FOR DEVC
Explanation: I/O system was requested to
perform an impossible operation, such as
reading a printer.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHTB
Variable data supplied by: CZHTB
CZHTB002 INVALID LENGTH SPECIFIED
Explanation: Module requesting I/O specified
invalid length parameter.
System Action: standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHTB
Variable data supplied by: CZHTB
CZHTE010 CHANNEL PROG EXCEEDS MAX
Explanation: The number of CCWs required to
fulfill the I/O request is greater than
available space for building the channel
program.
Systelf' Acticn: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHTB
Variable data supplied by: CZHTB
CZHTCOOA INVAL FORMS MOTION BYTE
Explanation: First byte in a print line is not
valid as TSSS carriage control data.
System Action: Standard.
Reference Data (Also see AFpendix E-24.)
Requirement determined by: CZHTC
Variable data supplied by: CZH~C
available space for building the channel
program.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHTD
Variable data supplied by: CZHTD
CZHUA006 PERMANENT I/O ERROR
CZHTCOOO INVAL OPERATION FOR DEVC
Explanation: I/O system was requested to
perform an impossible operation, such as
reading a printer.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHTC
Variable data supplied by: CZHTC
Explanation: Error recovery retry attempts
have failed, or CSW indicates unrecoverable
error.
System Action: Standard, in most cases. If
the failing device is the inFut device while
in call mode (card reader or tape drive),
the terminal becomes the input device again.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHUA
Variable data supplied by: CZHUA
CZHTCOOl DEVICE NOT SUPPORTED
Explanation: Self-explanatory.
System Action: Standard.
Reference Datz (Also see Appendix B-4.)
Requirement determined by: CZHTC
Variable data supplied by: CZHTC
CZHTC002 INVALID LENGTH SPECIFIED
Explanation: Module requesting I/O specified
invalid length parameter.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHTC
Variable data supplied by: CZHTC
CZHTDOOO INVAL OPERATION FOR DEVC
Explanation: I/O system was requested to
perform an impossible operation, such as
reading a printer
System Action: Standard.
Reference Data (Also see AFpendix B-24.)
Requirement determined by: CZHTD
Variable data supplied by: CZHTD
CZHUB006 PERMANENT I/O ERROR
Explanation: Error recovery retry attempts
have failed, or CSW indicates unrecoverable
error.
System Action: Standard, in most cases.
If
the failing device is the input device while
in call mode (card reader or tape drive),
the terminal becomes the input device again.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHUB
Variable data supplied by: CZHUB
CZHUC006 PERMANENT I/O ERROR
Explanation: Error recovery retry attempts
have failed, or CSW indicates unrecoverable
error.
Systell Action:
Standard, in most cases.
If
the failing device is the input device while
in call mode (card reader or tape drive),
the terminal becomes the input device again.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHUC
Variable data supplied by: CZHUC
CZHUt006 PERMANENT I/O ERROR
CZHTDOOl DEVICE NOT SUPPORTED
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-34.)
Requirement determined by: CZHTD
Variable data supplied by: CZHTD
CZHTD002 INVALID LENGTH SPECIFIED
Explanation: Module requesting I/O specified
invalid length parameter.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHTD
Variable data supplied by: CZHTD
CZHTDOIO CHANNEL PROG EXCEEDS MAX
Explanation: The number of CCWs required to
fulfill the I/O request is greater than
Explanation: Error recovery retry attempts
have failed, or CSW indicates unrecoverable
error.
System Action: Standard, in most cases. If
the failing device is the input device while
in call mode (card reader or tape drive>,
the terminal becomes the input device again.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHUD
Variable data supplied by: CZHUD
CZHUE006 PERMANENT I/O ERROR
Explanation: Error recovery retry attempts
have failed, or CSW indicates unrecoverable
error.
systen:, Action: Standard, in most cases. If
the failing device is the input device while
in call mode (card reader or tape drive),
the terminal becomes the input device again.
Reference Data (Also see Appendix B-24.)
Section 2:
TSSS Messages
597
Requirement determined by:
Variable data supplied by:
CZHUE
CZHUE
CZHUE007 SYSTEM LOGIC ERROR
Explanation: An internal logic error has
occurred in TSSS. Should not happen.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHUE
Variable data supplied by: CZHUE
CZHWAl18 INVALID RM ADDRESS
Explanation: A segment 0 or 1 address cannot
be resolved with the RSS page tables.
system Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHWA
Variable data supplied by: CZHWA
CZHWS112 INVALID SYMBOL
Explanation: A symbol contains an invalid
character or too many characters.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHWS
Variable data supplied by: CZHWS
CZHXAlOB INVALID $ID PARAMETER
Explanation: A dictionary search failed to
find an appropriate symbol.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHXA
Variable data supplied by: CZHXA
CZHXA10F BAD PARAM:OPERATION DONE
Explanation: Operation requested was
incorrectly specified but performed anyway.
Result may be unpredictable.
System Action: Processing continues as if no
error occurred.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHXA
Variable data supplied by: CZHXA
CZHXA100 INVAL SYST SYMBOL PARAM
Explanation: Parenthesized parameter of a
system symbol is incorrectly specified.
Does not apply to $RM or $VM.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZEXA
Variable data supplied by: CZHXA
CZHXA106 UNDEFINED SYMBOL
Explanation: Search of appropriate symbol
tables found no match.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZEXA
Variable data supplied by: CZHXA
598
CZHXA107 WRONG NO. OF PARAMETERS
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHXA
Variable data supplied by: CZHXA
CZHXA118 INVALID RM ADDRESS
Explanation: A segment 0 or 1 address cannot
be resolved with the RSS page tables.
System Action: Standard.
Reference Data (Also see Ap~endix B-24.)
Requirement determined by: CZHXA
Variable data supplied by: CZHXA
CZHXA120 IMPROPER SUBSCRIPT
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHXA
Variable data supplied by: CZHXA
CZHXA125 IMPROPER IF
Explanation: The logical expression that
constitutes the IF operand cannot be
evaluated as either true or false.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHXA
Variable data supplied by: CZHXA
CZHXA126 ATTRIBUTE ERROR
Explanation: One or more parameters
incorrectly specified with immediate
attribute designation.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHXA
Variable data supplied by: CZHXA
CZHXA127 RANGE OPERATOR IN ERROR
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHXA
Variable data supplied by: CZHXA
CZHXA20D SYSTEM LOGIC ERROR
Explanation: An internal logic error has
occurred in TSSS. Should not happen.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: C ZHXA
Variable data supplied by: CZHXA
CZHXC114 INPUT STRING TOO LONG
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by:
Variable data supplied by:
CZHXC
CZHXC
CZHXLI06 UNDEFINED SYMBOL
Explanation: Search of appropriate symbol
tables found no match.
System Action: Standard.
System: N/A
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHXL
Variable data supplied by: CZHXL
CZHXLll1 INVALID LITERAL
Explanation: Incorrect specification of a
literal, which can include -L-notation.System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHXL
Variable data supplied by: CZHXL
CZHXL124 OVERFLOW CONDITION
Explanation: Either truncation was performed
during execution of a SET or COLLECT
command, or a fixed-point overflow exception
resulted from an arithmetic operation.
System Action: Processing continues as if no
error occurred.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHXL
Variable data supplied by: CZHXL
CZHXPIIB INVALID INPUT CHARACTER
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHXP
Variable data supplied by: CZHXP
CZHXPlll INVALID LITERAL
Explanation:
Incorrect specification of a
which can include -L-notation.System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHXP
Variable data supplied by: CZHXP
lit~ral,
CZHXS20D SYSTEM LOGIC ERROR
Explanation: An internal logic error has
occurred in TSSS. Should not bappen.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHXS
Variable data supplied by: CZHXS
CZHXS205 SCB COUNT IN ERROR
Explanation: Language processing has detected
an invalid count of Symbol Control Blocks.
System Action: standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHXS
Variable data supplied by: CZHXS
CZHYAI0E INVALID MEMORY QUALIFIER
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYA
Variable data supplied by: CZHYA
CZHYAI06 UNDEFINED SYMBOL
Explanation: Search of appropriate symbol
tables found no match.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYA
Variable data supplied by: CZHYA
CZHYAI07 WRONG NO. OF PARAMETERS
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYA
Variable data dupplied by: CZHYA
CZHYAllA 'AT' TABLE OVERFLOW
Explanation: Self-explanatory; possibly a
shorter dynamic statement would be accepted.
System Action: AT command rejected; input
device is read again.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYA
Variable data supplied by: CZHYA
CZHXP112 INVALID SYMBOL
CZHYA119 INVALID 'AT' LOCATION
Explanation: A symbol contains an invalid
character or too many characters.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHXP
Variable data supplied by: CZHXP
Explanation: An excluded instruction resides
at specified location.
System Action: AT command rejected; input
device is read again.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYA
Variable data supplied by: CZHYA
CZHXPl13 INCORRECT SYNTAX
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appdneix B-24.)
Requirement determined by: CZHXP
Variable data supplied by: CZHXP
CZHYCI06 UNDEFINED SYMBOL
Explanation: Search of appropriate symbol
tables found no match.
System Action: Standard.
Section 2:
TSSS Messages
599
Reference Data (Also see Appendix B-24.>
Requirement determined by: CZHYC
Variable data supplied by: CZHYC
CZHYCI07 WRONG NO. OF PARAMETERS
EXplanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYC
Variable data supplied by: CZHYC
CZHYC122 COLLECT PARAM 1 INVALID
EXplanation: The parameter that specifies the
collection area in a COLLECT command operand
is invalid.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYC
Variable data supplied by: CZHYC
CZHYC124 OVERFLOW CONDITION
Explanation: Either truncation was performed
during execution of a SET or COLLECT
command, or a fixed-point overflow exception
resulted from an arithmetic operation.
System Action: processing continues as if no
error occurred.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYC
Variable data supplied by: CZHYC
CZHYDI0D INVALID $DOUT DEVICE
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYD
Variable data supplied by: CZHYD
CZHYDI0E INVALID MEMORY QUALIFIER
Explanation: Self-explanatory.
system Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYD
Variable data supplied by: CZHYD
CZHYDI07 WRONG NO. OF PARAMETERS
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYD
Variable data supplied by: CZHYD
CZHYI:I1C INVALID RECORD ADDRESS
Explanation: Self-explanatory; this occurs
when a dump or display involves reading from
a direct access device.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYD
Variable data supplied by: CZHYD
CZHYD121 SP ATTENTION RECEIVED
Explanation: An ATTENTION by the System
Programmer, issued while RSS or VSS was
executing, is acknowledged.
System Action: The interrUpt may have caused a
display or dump to be terminated; see
-DISPLAY Command w and -DUMP Command." The
System Programmer's terminal is solicited
for input.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYD
Variable data supplied by: CZHYD
CZHYD128 DUMPED TO tape address EOR
Explanation: During execution of the DUMP
Command when the output device is a tape
drive, the end of the tape reel has been
reached.
tape address -- eight-digit hexadecimal
number .represents the storage address of the
last byte of data written to the tape.
System Action: Standard. If the remainder of
the dump is to be written, the reel should
be changed on the current output device (or
the value of $DOUT changed) and a new DUMP
command issued.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYD
Variable data supplied by: CZHYD
CZHYD206 INVALID SCB TYPE
CZHYDI05 INVALID DEVICE SPECIFIED
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYD
variable data supplied by: CZHYD
Explanation: Internal logic error; detected
during language processing.
Syste:n Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYD
Variable data supplied by: CZHYD
CZHYEI03 UNDEFINED ALIAS SYMBOL
CZHYDI06 UNDEFINED SYMBOL
ExpLanation: Search of appropriate symbol
tables found no match.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYD
Variable data supplied by: CZHYD
600
Explanation: The symbol used as the second
parameter in format 2 of the DEFINE command
cannot be resolved.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYE
Variable data supplied by: CZHYE
CZHYE107 WRONG NO. OF PARAMETERS
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYE
Variable data supplied by: CZBYE
CZHYE108 SP SYMBOL TABLE FULL
Explanat10n: Self-explanatory.
If this was a
format 1 use of the DEFINE command, there
may be sufficient space for a format 2
DEFINE command or a format 1 command that
requests less storage.
System Action: DEFINE command rejected. The
input device is read again.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYE
Variable data supplied by: CZHYE
CZHYLllD IMPROPER CALL COMMAND
EXplanation: Self-explanatory.
system Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYL
Variable data supplied by: CZHYL
CZHYLllF END COMMAND INVALID
EXplanation: Incorrect use of the END Command.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZBYL
Variable data supplied by: CZHYL
CZHYM107 WRONG NO. OF PARAMETERS
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYM
Variable data supplied by: CZHYM
CZHYN107 WRONG NO. OF PARAMETERS
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYN
Variable data supplied by: CZHYN
Requirement determined by:
Variable data supplied by:
CZHYP
CZBYP
CZHYPl15 PATCH TABLE OVERFLOW
Explanation: Self-explanatory; possibly a
shorter patch will be accepted.
System Action: PAXCB command rejected; input
device is read again.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYP
Variable data supplied by: CZBYP
CZHYP116 REDUNDANT PATCH
Explanation: A patch already exists at
specified location.
System Action: PATCH command rejected; input
device is read again.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYP
Variable data supplied by: CZHYP
CZHYQ10E INVALID MEMORY QUALIFIER
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYQ
Variable data supplied by: CZHYQ
CZHYQ107 WRONG NO. OF PARAMETERS
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYQ
Variable data supplied by: CZHYQ
CZHYQ109 INVALID TASK ID
Explanation: The task identification number
supplied with a CONNECT or QUALIFY cOJ!lll'.and
was not found in a search of the TSI chain
(RSS ONLY).
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYQ
Variable data supplied by: CZHYQ
CZHYR10E INVALID MEMORY QUALIFIER
CZ:lYP106 UNDEFINED SYMBOL
Explanation: Search of appropriate symbol
tables found no match.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYP
Variable data supplied by: CZHYP
CZHYP107 WRONG NO. OF PARAMETERS
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYR
Variable data supplied by: CZHYR
CZHYR106 UNDEFINED SYMBOL
Explanation: Search of appropriate symbol
tables found no match.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYR
Variable data supplied by: CZHYR
Section 2:
TSSS Messages
601
CZBYR107 WRONG NO. OF PARAMETERS
EXplanation: Self-explana tory.
System Action; Standard.
Reference Data (Also see Appendix B-24.)
RequiremeJit: determined by: CZBYR
Variable data supplied by: CZHYR
CZHYRllE INVALID REMOVE OPERAND
Explanation: Operand not $AT or $PATCH, or
accompanying parameter is invalid.
System Action: Standard.
Reference Data (Also see AFpendix B-24.)
Requirement determined by: CZHYR
Variable data supplied by: CZHYR
CZHYSOOO INVAL OPERATION FOR nEVC
Explanation:
I/O system was requested to
perform an impossible operation, such as
reading a printer.
system Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYS
Variable data supplied by: CZHYS
CZHYSI0C INVALID CPU SPECIFIED
Explanation: Incorrect specification of a
parameter with the $RM system symbol.
System Action: Standard.
Reference Data (Also see AFpendix B-24.)
Requirement determined by: CZHYS
Variable data supplied by: CZHYS
CZHYSI0E INVALID MEMORY QUALIFIER
Explanation: self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYS
Variable data supplied by: CZHYS
CZHYSI06 UNDEFINED SYMBOL
Explanation: Search of appropriate symbol
tables found no match.
system Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYS
Variable data supplied by: CZHYS
CZHYS107 WRONG NO. OF PARAMETERS
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYS
Variable data supplied by: CZHYS
CZHYS123 INVALID LENGTH
Explanation: More than 4096 bytes specified by
a SET, PATCH, or COLLECT command.
System Action: standard.
Reference Data (Also see Appendix B-24.)
602
Requirement determined by:
Variable data supplied by:
CZHYS
CZHYS
CZHYS124 OVERFLOW CONDITION
EXPlanation: Either truncation was performed
during execution of a SET or COLLECT
command, or a fixed-point overflow exception
resulted from an arithmetic operation.
System Action: Processing continues as if no
error occurred.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZBYS
Variable data supplied by: CZHYS
CZHYS126 ATTRIBUTE ERROR
Explanation: One or more parameters
incorrectly specified with immediate
attribute designation.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYS
Variable data supplied by: CZHYS
CZHYTI07 WRONG NO. OF PARAMETERS
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHYT
Variable data supplied by: CZHYT
CZHZA20E AT SVC PSW FOLLOWS
Explanation: This message immediately follows
Message -moduleid201 •••• or Message
-moduleid208 ••• ". This message may also
follow the diagnostic message that is issued
when a system attempt to remove an AT is
unsuccessful (see Message -moduleid208
••• ").
In each case, the AT can be
identified by the instruction address in the
PSW (vpsw in VSS) that is written
immediately following this message.
Systen Action: An implied RUN is executed.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZBZA
Variable data supplied by: CZHZA
CZHZA200 AT RELOCATION AREA OVFLO
Explanation: The eight AT relocation areas for
this type of AT are all locked, and an
attempt was made to use them. See Appendix
D, IBM System/360 Time Sharing System: Time
Sharing Support System, GC28-2006, for a
definition of the AT relocation areas and a
description of their use.
System Action: The System programmer's
terminal is solicited for input. A recovery
attempt can be made (see Appendix D, IEM
System/360 Time Sharing System: Time
Sharing Support System, GC28-2006).
Alternatively, other commands can be issued.
Ho~ever, any ATs that reference the locked
AT relocation area cannot be executed; if
encountered, those ATs will cause this
message to be issued.
Reference Data (Also see Appendix B-24.)
Requirement determined by:
Variable data supplied by:
CZHZA
CZHZA
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHZF
Variable data supplied by: CZHZF
CZHZA201 UNEXPECTED 'AT' SVC
Explanation: A spurious AT SVC execution
occurred. for which there is no entry in the
AT Table.
System Action: After this message is printed.
Message ·moduleid20e •••• and the
accompanying PSW are printed. followed by an
implied RUN at the instruction address
following the spurious AT SVC.
Reference Data (Also see A~pendix B-24.)
Requirement determined by: CZHZA
Variable data supplied by: CZHZA
CZHZA208 ERROR COND--'AT' REMOVED
Explanation:
(1) If this message was
immediately preceded by another message. a
system error detected during AT processing
caused the previous message to he written;
the offending AT has now been removed.
(RSS
only) (2) If this message is written without
another diagnostic message immediately
preceding it. it means that a branch or LPSW
instruction overlaid by an AT SVC could not
be simulated after the associated dynamic
statement was executed. The AT has been
removed.
System Action: Message "moduleid20E AT SVC PSW
FOLLOWS" is written, and an implied RUN is
executed. Note that in the case described
by explanation (2). a program check can be
expected upon execution of the previously
overlaid instruction.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHZA
Variable data supplied by: CZHZA
CZHZF10E INVALID MEMORY QUALIFIER
Explanation: Self-explanatory.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHZF
Variable data supplied by: CZHZF
CZHZF101 NO 'PATCH' AT THIS LOC
Explanation: The $PATCH system symbol's
parameter does not specify a valid patch
location.
System Action: Standard.
Reference Data (Also see Appendix B-24.)
Requirement determined by: CZHZF
Variable data supplied by: CZHZF
CZHZF102 NO 'AT' AT THIS LOCATION
Explanation: The $AT system symbol's parameter
does not specify a valid AT location.
moduleidOOD INTERVENTION REQUIRED
Explanation: If Message "moduleidOOE
"
cannot be used because the Operator's
Terminal is not ready. and if the Operator's
Terminal is not a 1057-2 (the audible alarm
would be sounded if i t were), this message
is written to the MSP Terminal.
System Action: An attempt is made repeatedly
to initiate the I/O operation on the device.
Reference Data (Also see Appendix B-23.)
Requirement determined by: moduleid
Variable data supplied by: moduleid
Message residence: CEHCM and CZHNM
Message issued by: CEHCM or CZBNM
Destination
Conversational: Operator's Terminal
moduleidOOE INTERVENTION REQUIRED
Explanation: This self-explanatory message is
written to the Operator's terminal when a
TSSS device requires it.
System Action: An attempt is made repeatedly
to initiate the I/O operation on this
device.
Reference Data (Also see Appendix B-23.)
Requirement determined by: moduleid
Variable data supplied by: moduleid
Message residence: CEHCM and CZHNM
Message issued by: CEHCM or CZHNM
Destination
Conversational: Operator's Terminal
H:oduleidl10 OPERATION NOT PERFORMED
Explanation: Operation requested could not be
performed because of incorrect
specification.
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: moduleid
Variable data supplied by: moduleid
Message residence: CEHCM and CZHNM
Message issued by: CEHCM or CZBNM
moduleid203 PAGE NOT IN TSS XPT
Explanation: An addressed page flagged "not in
core" could not be found in External Page
Table (RSS only).
System Action: Standard.
Reference Data (Also see Appendix B-23.)
Requirement determined by: moduleid
Variable ~ata supplied by: moduleid
Message residence: CEHCM and CZBNM
Message issued by:
CEHCM or CZHNM
Section 2:
TSSS Messages
603
APPENDIX A:
MODULES REQUIRING MESSAGES
CEAAE
External Page Location Address Translator
CEAAF
Queue GQE on TSI
CEAAG
start I/O
CEAAJ
Dequeue I/O Requests
CEAAK
Set Asynchronous Entry SVC
CEAAL
Purge
CEAAM
Paging I/O Error Recovery Control
CEAAN
Task Communication control
CEAAP
Suppress Auxiliary Allocation
CEAAQ
Paging Failure Recovery
CEAAR
Reinitialize Operator Task
CEAAS
Alternate Path Retry
CEAAT
Standard Area Retry
CEAAU
Scan on Task ID
CEAAV
Same Path Retry
CEAAO
I/O Call
CEAAl
Page Out Service Routine
CEAA2
Task Interrupt Control (Page Out SVC)
CEAA3
I/O Device Queue Processor
CEAA4
Channel Interrupt Queue Processor
CEAA6
page Direct Access Queue Stibprocessor
CEAA1
page Direct Access Interrupt Subprocess or
CEAA8
page Drum Queue Processor
CEAA9
Page Drum Interrupt Queue Processor
CEABE
External Machine Check Interrupt Processor
CEAHQ
Supervisor call Queue Processor
CEAB2
Setup or Extract TSI Field
CEAB7
Set External Page Table Entries
CEAIA
ASA (Auxiliary Storage Allocation Queue
SYSGEN/STARTUP)
604
CEAIC
Inter-CPU Communication
CEAIR
Recovery Nucleus
CEAIS
SYSERR
CEAI6
Real Core Statistical Data Recording
CEAI1
Real Core Error Recording
CEAJI
InterrUpt Stacker
CEAJQ
Queue Scanner
CEAKC
Move Commutator
CEAKD
Dispatcher
CEART
Timer Interrupt Queue Processor
CEALl
Supervisor Core Allocation
CHAMA
Activate TSI
CEAMC
Create TSI
CEAMD
Delete TSI
CEAMI
Deactivate TSI
CEAML
Locate page
CEAMP
Page Posting
CEAMS
Search RSPI Table
CEAMW
Write Shared Pages
CEANA
Program Interrupt Queue Processor
CEANB
User Core Allocation
CEANC
Find Page
CEAND
Delete Page SVC
CEANF
Contiguous Core Allocation
CEAPO
Move Page Table Entries
CEAP4
Load Virtual PSW
CEAPS
Change Priority
CEAl'7
AWAIT SVC Processor
CEAQ2
Set User Interval Timer
CEAQ4
Check Protection Class
CEAQ5
Intertask Communication
CEAQ6
Add Shared Pages
CEARO
TWAIT SVC Processor
CEAS6
Read Time SVC
CEAS7
Set Real Time Interval SVC
CFAT2
Create Sp-TSI
CEBDI
Direct Access Device Initialization
(DASDI)
CEBDP
CEHGC
RSS SAM (Sequential Access Device) Error
Recovery
CEBGD
RSS TAM (Telecommunications) Error
Recovery
CEBGE
RSS Error Scan and Recovery
CEBJA
RSS AT SVC Processor
CEBJF
RSS $AT/$PATCH Format
CEHKA
RSS AT Command Processor
CEBKC
RSS COLLECT Command Processor
Direct Access Print (DADUMP)
CEHKD
RSS DUMP/DISPLAY Commands Processor
CEBDR
Direct Access Device Dump/Restore (DASDDR)
CEBKE
RSS DEFINE Command Processor
CEHAE
RSS External Interrupt Processor
CEHKL
RSS CALL/END Commands Processor
CEBAP
RSS program Interrupt Processor
CEBKM
RSS DISCONNECT Command Processor
CEBBD
RSS Disconnect
CEHKN
RSS RON Command Processor
CEHBE
RSS Exit
CEBKP
RSS PATCH Command processor
CEHBL
RSS Loader
CEHKQ
RSS QUALIFY Command Processor
CEHBT
RSS External Page Location Address
Translator
CEHKR
RSS REMOVE Command Processor
CEHKS
RSS SET Command Processor
CEBBU
RSS Unloader
CEHKT
RSS STOP Command Processor
CEBCA
RSS Real Core Access
CEHKW
RSS CONNECT Command Processor
CEHCB
RSS Virtual Memory Access
CEHLA
RSS Operator Functions
CEBCF
RSS Find TSI (Task Status Index)
CEHLC
RSS Language Control
CEBCM
RSS Message
CEHLL
RSS Literal Resolution
CEBDE
RSS VSS Exit
CEHLP
RSS Source to Polish
CEBDR
RSS SVC Service Processor
CEHLS
RSS Scan Control
CEBEA
RSS I/O Control
CEHMA
RSS Address to Symbol Resolution
CEBEB
RSS I/O Initialization
CEHMS
RSS Symbol Resolution
CEHFA
RSS DASDAM (Direct Access Device) Access
Method
CEIAA
STARTUP
CEHFB
RSS CAM (Console) Access Method
CEIAP
STARTUP Prelude
CEHFC
RSS SAM (Sequential Access Device) Access
Method
CEIFA
SYSBLD (system Build)
CEKAB
Extract Source Character
CEHFD
RSS TAM (Telecommunications) Access Method
CEKAC
Statement Identification
CEHGA
RSS DASDAM (Direct Access Device) Error
Recovery
CEKAD
Phase I Main Loop
RSS CAM (Console) Error Recovery
CEKAE
Assemble Components
CEKAF
Array Dimension Specification Processor
CEBGB
Appendix A:
Modules Requiring Messages
605
CEKAG
Subscript Processor
CEKBP
IMPLICIT Statement, Pass 2
CEKAH
Initial Value Data Specification Processor
CEKBQ
Fall Through Determination
CEKAI
Expression Processor
CEKBR
Blank Statement Processor
CEKAJ
Statement Label Processor
CEKBS
Subprogram Entry Statements Processor
CEKAK
Assignment statement Processor
CEKBT
Subprogram Entry Statements, Pass 2
CEKAL
END Statement Processor
CEKBU
CALL Statement Processor
CEKAM
EXTERNAL Statement Processor
CEKBV
CALL Statement, Pass 2
CEKAN
Conversion Subroutine
CEKBW
I/O List Processor
CEKAQ
GO TO Statement Processor
CEKBX
Function Classifiers
CEKAR
IF Statement Processor
CEKBY
Library Function Selector
CEKAS
Type Statements Processor
CEKBZ
statement Function Definition, Pass 2
CEKAT
CONTINUE Statement Processor
CEKCA
Diagnostic Message Generator (ERR)
CEKAU
DIMENSION Statement Processor
CEKCB
Constant Arithmetic Subroutine
CEKAV
COMMON Statement Processor
CEKCC
Label String Processor
CEKAW
Declaration Statements, Pass 2
CEKCD
Format Label Processor for I/O Statements
CEKAX
Executable Statements, Pass 2
CEKCE
Read Transfer Processor for I/O Statements
CEKAY
EQUIVALENCE Statement Processor
CEKCF
Format or Namelist Name Processor
CEKAZ
DO Statement Processor
CEKCG
Term Processor
CEKBA
Begin Loop Processor
CEKCH
File Reel Constant
CEKBB
End LOOp Processor
CEKCI
Insert Variable in Symbol Table
CEKBC
ASSIGN Statement Processor
CEKCJ
Check Limits
CEKBD
File Control Statement Processor
CEKCK
Clear I.imi ts
CEKBE
Input-Output Statements Processor
CEKCL
Initial Value Processor
CEKBF
FORMAT Statement Processor
CEKCN
Decimal to Binary Integer Conversion
CEKBG
PAUSE, STOP, RETURN Statement Processor
CEKCP
Decimal to Floating Binary Conversion
CEKBH
NAMELIST Statement Processor
CEKCQ
File Integer Constant
CEKBI
BLOCK DATA Statement Processor
CEKCS
Constant Arithmetic Overflow
CEKBJ
BLOCK DATA statement, Pass 2
CEKJA
Phase 2 Description
CEKBK
Statement FUnction Definition
CEKJB
FSCAN
CEKBL
Statement FUnction Expansion
CEKJC
VSCAN
CEKBM
DATA Statement Processor
CEKJD
Label Reference Processor (RTN)
CEKBN
IMPLICIT Statement Processor
CEKJE
Label Reference Processor (LAB)
606
CERJF
Statement Label Reference Inspection
CEKMC
Real Plus Generator
CEKJG
Format Reference Inspection
CEKMD
Integer Divide
CEKJH
Diagnostic Message Generator
CEKME
Integer Multiply Generator
CEKKA
Acquire Entry from compute and Remove
Table
CEKMF
Integer PlUS
CEKMG
Complex Plus Generator
CEKKB
Polish Expression Generation
CEKMH
Real and Integer Relational
CEKKC
End Loop PRF Entry
CEKMI
And/Or Subroutine
CEUE
Expression Scan
CEKMJ
Equation PF-Entry Processor
CEKKF
Pushdown Primitive operand
CEKMK
External Function Generator
CEKKG
Variable Compute Point and Removal Level
CEKML
Expression Tree Builder
CEKKH
Triad File Manipulation
CEKMM
Assign Initial to Arithmetic Register
CEKKI
Expression Removal and Commonality
Determination
CEKMN
Assign to Arithmetic Register
CEKKJ
Check Commonality
CEKMO
Assign Initial to Floating Register
CEKKK
Establish Common Expression
CEKMP
Assign to Floating Register
CEKKL
Routine to Form Expressions in Operand
List
CEKMQ
Select Floating Register
CEKMR
Find Arithmetic Register
CEKKM
Subscript Expression Revision Routine
CEKMS
Find Floating Register
CEKKN
canonical Form Routine
CEKMT
Find Temporary Storage
CEKKO
Routine to Keep Popularity Counts for
Register Assignment
CEKMU
Maximum Operator Subroutine
CEKKP
Search and Insert Triads
CEKMV
Memory Access Routine
CEKKR
Phase 3 Master Control
CEKMW
Operand Processing
CEKKU
PRF Processing Routine
CEKMX
Release Temporary Storage
CEKKV
Begin Loop 1 PRF Processor
CEKMY
Result-Register Operand Processing
CEKKW
Begin Loop 2 PRF Processor
CEKMZ
Local Branch Generator
CEKLA
Label Common Expressions
CEKNA
General Register Availability for Integer
Divide
CEKLB
File Constant and Covering Adcon
CEKNB
Register Availability for Integer Multiply
CEKLD
Expunge a Removable Subexpression
CEKND
Select Operand
CEKLE
File CRT Entries
CEKNE
Weight Subroutine
CEKLF
copy and Edit an Expression
CEKNF
Select position for Operation
CEKLI
Loop Test-Expression Generator
CEKNG
Select Single Arithmetic Register
CEKMA
Real Division Generator
CEKNH
Select Odd/Even Arithmetic Register Pair
CEKMB
Real Multiply Generator
CEKNI
Code File Output
Appendix A:
Modules Requiring Messages
607
CEKNJ
Comma Operator processing
CEKOU
Open FUnction Processing (OPEN 2)
CEKNK
Arithmetic IF PF-Entry Processor
CEKOV
Add by Load Address
CEKNL
Logical IF PF-Entry Processor
CEKOW
select One Operand in a Register
CEKNfIl
Begin Loop 1 PF-Entry Processor
CEKOX
open FUnction Processing (OPEN 3)
CEKNN
Begin Loop 2 PF-Entry Processor
CEKOY
open FUnction Processing (OPEN
CEKNO
Begin Loop 3 PF-Entry Processor
CEKOZ
open Function Processing (OPEN 5)
CEKNP
End Loop PF-Entry Processor
CEKSA
Fortran Compiler Output Generator
CEKNQ
Assigned GO TO PF-Entry Processor
CEKSB
Object Program Module Builder
CEKNR
computed GO TO PF-Entry Processor
CEKSC
Common Control Section Generator
CEKNS
ASSIGN PF-Entry Processor
CEKSD
Preset Data Processor
CEKNT
GO TO PF-Entry Processor
CEKSE
output page Beading
CEKNU
Referenced Label PF-Entry Processor
CEKSF
Code Control Section Generator
CEKNV
Labeled Branch Generator
CEKSG
PSECT Builder
CEKNW
Arithmetic Expression Generator
CEKSB
Internal Symbol Dictionary Generator
CEKNX
Phase 4 Master Control
CEKSI
Object Program Documentation
CEKOB
Common Subexpression Usage Count
CEKSJ
Symbol Table Sort
CEKOC
Operand status Routine
CEKSK
Cross-Reference List Routine
CEKOD
Entry Point Processor
CEKSL
Constant Conversion
CEKOE
Return Processor
CEKTA
Phase Controller
CEKOF
Complex Multiplication Generator
CEKTC
Get Next Source Statement
CEKOG
Complex Divide Generator
CEKTD
process Terminal Modifications
CEKOH
I/O Statement PF-Entry Processor
CEKTE
Receive Diagnostic Message Module
CEKOI
I/O List Element PF-Entry Processor
CEKTF
Constant Filers Module
CEKOJ
End List PF-Entry Processor
CEKTB
Master Input/Output Module
CEKOK
STOP and PAUSE Statement PF-Entry
Processor
CEKTI
Analyze Console Source Line
CEKOL
CALL Process or
CEKTL
Build a .List Data Set Buffer
CEKOM
Open Function Control Module
CEKTQ
Compiler File Dump Module
CEKON
Register Flush Subroutine
CEKTS
Compiler Line Dump Module
CEKOP
Load Covering-Adcon Routine
CEVAD
Address Constant Processor (AnCON)
CEKOQ
Edit for Code File
CEVAN
ANOP Instruction Scan
CEKOR
Single Operand Locating Routine
CEVBS
Basic Source Language Scan {BAS CAN)
CEKOS
Operand Fetch Complement-Store Routine
CEVCC
Phase 3 CCW Instruction Processor (CCWTXT)
CEKOT
Open Function Processing (OPEN 1)
CEVCD
CSD Processor (CSDPR)
608
Il)
CEVCE
SPACE Instruction Scan
CEVPA
Phase 1 Control
CEVCN
CNOP Instruction Scan
CEVPB
Phase 2-A Control
CEVCS
Constant Scan (CSCAN)
CEVPC
Phase 2-E Control
CEVCT
control Section Instruction Scan
CEVPD
Phase 2-C Control
CEVCW
CCW Instruction Scan
CEVPE
Phase 3 Control
CEVCY
COPY Instruction Processor
CEVPH
PUNCH Instruction Scan
CEVDF
Macro Definition Processor (MACDEF)
CEVPR
PRINT Instruction Operand Scan
CEVDR
DROP Table Processor (DRSET)
CEVPV
PUTVAL (Relocatable Output Value
Processor)
CEVDX
Diagnostic Message Processor (DIAG)
CEVQU
EQU Instruction Scan
CEVEJ
EJECT Instruction Scan
CEVR£
REED (Obtain Next Source Statement)
CEVEP
Module Entry Point Processor (ENDPR)
CEVRE
REPRO Instruction Scan
CEVEQ
Assign Value to Name (EQUATE)
CEVRF
MACREF (Macro Reference Processor)
CEVEV
EVAL (Expression EValuation)
CEVRG
ORG Instruction Scan
CEVEY
ENTRY Instruction Scan
CEVRS
RESCON (Resolve Conditional Alignment)
CEVGB
EBIN (Binary Self-defining Term Generator)
CEVSD
ISDPR (ISD Processor)
CEVGC
ECHAR (character Self-defining Term
Generator)
CEVSE
SETX Instruction Scan
CEVSS
SSCAN (string Substitution Scan)
CEVGD
EDEC (Decimal Self-defining Term
Generator)
CEVST
STAN (Statement Analyzer)
CEVGH
EHEX (Hexadecimal Self-defining Term
Generator)
CEVSY
DEFSYM (Define Location Symbol)
CEVGL
Global/Local Symbol Instruction Scan
CEVTI
TITLE Instruction Scan
CEVGN
ORIGIN (Location counter Reset)
CEVU£
USING/DROP Instruction Scan
CEVGO
AGO/AIF Instruction Scan
CEVUP
USET (USING Table Processor)
CEVGP
GETOP (Collect and Identify Operation
Code)
CEVUV
USEVAL (Compute USING-Register Routine)
CEVXN
EXTRN Instruction Operand Scan
CEVIC
ICTL Instruction Scan
CEYBR
Bring PMD Test and ISD From Library
CEVLG
LTORG Instruction Scan
CEYCO
COMBINE Statement Processor
CEVMC
Macro Instruction Scan
CEYEN
END Statement Processors
CEVMN
MNOTE Instruction Scan
CEYIA
Input/Analyze
CEVMO
MOPR (Phase 3 Machine-operation Processor)
CEYIC
INCLUDE Statement Processor
CEVMP
Machine Instruction Operand Scan
CEYLK
Link Modules
CEVMX
MEND/MEXIT Instruction Scan
CEYRN
RENAME Statement Processor
CEVND
END Instruction Scan
CEYSC
SCAN
Appendix A:
Modules Requiring Messages
609
CHCBK
Real 8-Byte Base or Power to Real Power
Exponentiation
CHCBM
16-Byte Complex Number to Integer.Power
Exponentiation
SYSINDEX Routine (Symbolic Library
Indexing)
CHCBQ
Single precision Arctangent
CGCKB
SYSXBLD Routine (Build Symbolic Library
Index)
CHCBR
Double Precision Artangent
CGCKC
SYSEARCH Routine (Symbolic Litrary Search)
CHCBT
Single precision Gamma Function
CGCMA
Reconfiguration
CHCBV
Double Precision Gamma Function
CHCAA
Single Precision square Root
CHCBZ
FORTRANaBJTIME
CHCAB
Double Precision Square Root
CHCIA
Initialization
CHCAC
Single Precision Exponential
CHCIB
DCB Maintenance
CHCAD
Double Precision Exponential
CHCIC
I/O Control
CHCAE
Single Precision Logarithm
CHCID
Namelist Process
CHCAF
Double Precision Logarithm
CHCI!
List Item Process
CHCAI
Single Precision Sine and Cosine
CHCIF
Format Process
CHCAJ
Double Precision Sine and Cosine
CHCIH
Integer Output Conversion
CHCAM
single Precision Complex Exponential
CHCIl
Real Input Conversion (no exponent)
CRCAN
Double Precision Complex Exponential
CHCIO
Alphameric Input Conversion
CHCAO
Single Precision complex Logarithm
CHCIV
Dump Module
CHCAP
Double Precision Complex Logarithm
CHCIW
Exit Module
CHCAQ
Single Precision Complex Sine and Cosine
CMASB
Envir.
CHCAR
Double Precision Complex sine and cosine
CMASC
IlllInediate Print
CHCAW
Single Precision Arcsine and Arcosine
CMASD
Checker
CHCBA
Single Precision Hyperbolic Sine and
Cosine
CMASE
Pointer
CMASF
Restore/Valid
CHCBB
Double Precision Hyperbolic Sine and
Cosine
CMASG
Instr.
CHCBD
FORTRANOBJTlME
CMASB
CPU/Memory Checkout Program 1
CHCBG
Integer Base to Integer Power
Exponentiation
CMASI
CPU/Nemory Checkout Program 2
CMASJ
CPU/Memory Checkout Program 3
CHCBH
Real 4-Byte Base to Integer Power
CMASK
Dum-l
CHCBI
Real 8-Byte Base to Integer Power
CMASL
Dum-2
CHCBJ
Integer and 4-Byte Real Base to 4-Byte
Real Power Exponentiation
CMASM
Dum-3
CEYTR
TRAITS Statement Processor
CFADA
LPCMAIN
CFADB
GET LINE
CFADC
PUTDIAG
CGCKA
610
Record.
Retry Exec
CMATC
OLTS Print
CZAEI
CATALOG Command Routine
CMATF
OLTS CE Commun
CZAEJ
ERASE/DELETE Command Routine
CSFSU
Support Supervisor
CZAEL
DSS?
CZAAC
SCAN Routine
CZAAD
MSGWR Routine (Message Write)
CZAEM
LINE?
CZAAF
VMTI (Virtual Memory Task Initiation)
CZAEN
RET Command Routine
CZABA
Batch Monitor
CZAET
VAM Tape
CZABB
EXECUTE Command Routine
CZAFH
PERMIT Command Routine
CZABC
BACK Command Routine
CZAFI
SHARE Command Routine
CZABD
BULKIO Preprocessor
CZAFJ
RELEASE Command Routine
CZABF
READ TAPE
CZAFK
JOIN Command Routine
CZABG
PRINT Command Routine
CZAFL
QUIT Command Routine
CZABH
PUNCH Command Routine
CZAFM
LOGON Command Routine
CZABI
WRITE TAPE Command Routine
CZAFN
LOGOFF Command Routine
CZABJ
CANCEL Command Routine
CZAFS
CDD Command Routine
CZABQ
XWTO Routine
CZAFU
SECURE Command Routine
CZACA
MOCP (Main operator Control program)
CZAFV
CDS Command Routine
CZACB
MOHR (Main Operator Housekeeping Routine)
CZAGI:
FLOW Command Routine
CZACC
OXIP (Operator External
Processor)
CZAHA
DIAGNO (Program Interrupt Diagnostic
Processor)
CZAHC
XIP/XIIS (External Interrupt Subprocessor)
CZAMA
PCS PHASE1 - Phase I Input (Phase I
Control)
CZAMB
BRANCH Subroutine - Phase I Input
CZAMD
PCS FORMLIST Subroutine - Phase I Input
(Form Parameter List)
CZACD
Corr~and
Routine
Inte~rupt
,REPLY Command Routine
Command Routine
Command Routine
CZACF
MSG/BCST Command Routine
CZACG
FORCE Command Routine
CZACN
SHUTDOWN Command Routine
CZACP
ABEND
CZACQ
ABEND Processor
CZAME
PCS IF1 Subroutine - Phase I Input
CZACR
ABEND
CZAMF
PCS AT! Subroutine - Phase I Input
CZACS
PAIR (Place Address in AIR Table)
CZAMH
PCS EXPSCAN Subroutine - Phase I Input
(Expression Scan)
CZADF
DATA Command Routine
CZAMI
CZAEA
DDEF Command Routine
PCS PHASE! Subroutine - Phase I Input
(Phase I Control)
CZAEB
FINDJFCB Routine
CZAMJ
PCS SUBPOL Subroutine - Phase I Input
(Subscript to Polish)
CZAEC
FINDOS Routine
CZAML
CZAEG
MODIFY Command Routine
PCS DATAFLD Subroutine - Phase I Input
(Form Data Field Definition)
Appendix A:
Modules Requiring Messages
611
CZAMM
PCS INSTLOC Subroutine - Phase I Input
(Form Instruction Location Definition)
CZAMN
PCS INTERNAL Subroutine - Phase I Input
(Form Internal Symbol Definition)
CZAMO
PCS EXTERNAL Subroutine - Phase I Input
(Form External Symbol Definition)
CZAMP
Pes OFFSET Subroutine - Phase I Input
(Form Offset)
CZAMQ
PCS SCANFLD SUbroutine - Phase I Input
(Scan Field to Delimiter)
CZAMZ
User Control Routine
CZANA
PCS Phase2 Subroutine - Phase II Input
(Phase II Control)
CZANF
pes CODEGEN Subroutine - Phase II Input
(Code Generator)
CZANG
PCS SUBGEN Subroutine - Phase II Input
(Subscript Computation
CZANH
pes COMCON subroutine - Phase II Input
(Combine Constants)
CZANW
PCS DIAGNO Subroutine - Phase I Input
(Issue Diagnostics)
CZAOA
PCS VALMOD Subroutine - Phase I Input
(EValuate Module Name)
CZAOB
PCS VALSYM Subroutine - Phase I Input
(EValuate Internal Symbol)
CZASM
CONTEXT Processor
CZASN
LOCATE Processor
CZASP
LIST Processor
CZASQ
CORRECT Processor
CZASR
UPDATE processor
CZASU
NUMBER Processor
CZASY
Dram
CZATA
OLTAM Exec I/O
CZATB
OLTAM POSTING
CZATE
Procedure Expander
CZATF
SYSXPAT Processor
CZATH
KEYWORD Processor
CZATI
CHGPASS Processor
CZATJ
PRMPT (User prompter)
CZATP
PDEF(PROCDefinition) Routine
CZATR
SYNONYM/DEFAULT Routine
CZATS
EDIT Processor
CZAVB
TIME Command Routine
CZBSE
Line Editor Initialization Routine
CZBTB
LOGON2
CZAPB
PCS PCSPUT Subroutine - Output (PCS Output
Control)
CZCAA
MTREQ (Mount Request)
CZAPK
pes SAVIX Subroutine - Output (Saved
Instruction Execution)
CZCAB
BUMP
CZAQA
DISPLAY/DUMP Module
CZCAC
PAUSE
CZAQB
pes Display/Dump component
CZCDH
LIBE MAINT
CZAQC
DISPLAY/DUMP NEXT ITEM Subroutine (Process
Display List)
CZCDI
Dynamic Loader
CZCDU
Dynamic Unloader
CZAQW
DISPLAY/DUMP SUBERR Subroutine (Output
Subscript Diagnostic)
CZCEA
Allocate
CZASA
Command Analyzer and Executor
CZCEB
VAM Search
CZASB
Attention Handler
CZCEC
SAM Search
CZASC
Source List Handlers
CZCED
VAM Merge
CZASF
REGION Processor
CZCEE
SAM Merge
CZASG
DATALINE Processor
CZCEG
GIVBKS (Give Back SAM Storage)
CZASK
EXCERPT Processor
CZCES
SCRATCH
CZASL
EXCISE Processor
CZCEV
GIVHKV (Give Back VAM Storage)
612
CZCEX
EXTEND
CZCOG
VAM RECLAIM
CZCFA
ADDCAT (Catalog Services)
CZCOH
VAM Intlk
CZCFD
DELCAT
CZCOI
VAM Rlinkilk
CZCFH
Search SBLOCK
CZCOJ
VPAM FIND
CZCFI
INDEX
CZCOK
VPAM STOW
CZCFL
LOCATE
CZCOM
VPAM Extpod
CZCFO
OBTAIN/RETAIN
CZCOO
VPAM GETNUMB
CZCFS
SHARE
CZCOP
Sequential OPEN
CZCFT
DELVAM
CZCOR
Sequential GET
CZCFU
SBAREUP
CZCOS
Sequential PUT
CZCFV
UNSBARE
CZCOT
Sequential SETL
CZCFZ
RENAME
CZCOU
PUTX'
CZCGA
VMA (Virtual Memory Allocation>
CZCPA
Index Sequential PUT
CZCHA
Small Virtual Memory Allocation
CZCPB
Index Sequential GET
CZCJL
Leave Privilege
CZCPC
Index sequential SETL
CZCJT
Task Monitor Interrupt Processor
CZCPE
Index Sequential READ/WRITE
CZCJX
Time Conversion package
CZCPI
Index Sequential Get Page
CZCJY
Set Clock Routine
CZCPL
Index Sequential Add Directory Entry
CZCJZ
Cancel Clock Routine
CZCPZ
Index Sequential OPEN
CZCMC
MSAM OPEN
CZCQE
Search SDST
CZCMD
SETUR
CZCQF
VAM JFCB Fill
CZCME
00 MSAM GET/PUT
CZCRA
BSAM READ/WRITE
CZCMF
MSAM READ/WRITE (Action 6 Subroutine)
CZCRB
BSAM CONTROL
CZCMG
MSAM POSTING
CZCRC
BSAM CHECK
CZCMH
FINISH
CZCRF
BSAM PRTOV (Printer Overflow)
CZCMI
MSAM CLOSE
CZCRG
ESAM BSP (Backspace a Block)
CZCNA
FREEBUF
CZCRH
Direct Access Error Retry
CZCOA
VAM OPEN
CZCRM
BSAM POINT (Point Position to a Block)
CZCOB
VAM CLOSE
CZCRN
BSAM NOTE (Note Address of Last Block
Processed)
CZCOC
Move Page
CZCRP
SAM Posting and Error Retry
CZCOD
Insert/Delete Data Set Pages
CZCRX
Virtual Memory Error Recording
CZCOE
Request Pages
CZCRY
CZCOF
VAM INSERT
VMSDR (Virtual Memory Statistical data
Recording)
Appendix A:
Modules Requiring Messages
613
CZHTA
VSS DASDAM (Direct Access Device) Access
Method
CZHTB
VSS CAM (Console) Access Method
CZHTC
VSS SAM (Sequential Access Device) Access
Method
CZHTr;
VSS TAM (Telecommunications) Access Method
CZHUA
VSS DASDAM (Direct Access Device) Error
Recovery
CZHUB
VSS CAM (Console) Error Recovery
CZHUC
VSS SAM (Sequential ACCESS Device) Error
Recovery
CZHUD
VSS TAM (Telecommunications) Error
Recovery
CZHUE
VSS Error Scan and Recovery
CZHWA
VSS Address to Symbol Resolution
CZHWS
VSS Symbol Resolution
CZHXA
VSS Operator Functions
CZHXC
VSS
CZHXL
VSS Literal Resolution
CZHXP
VSS Source to Polish
CZHXS
VSS Scan Control
CZHYA
VSS AT Command Processor
CZHYC
VSS COLLECT Command Processor
CZHYD
VSS DUMP/DISPLAY Commands Processor
CZHYE
VSS DEFINE Command Processor
CZHYL
VSS CALL/END Commands Processor
CZHYM
VSS DISCONNECT Command Processor
CZHYN
VSS RUN Command Processor
CZHYP
VSS PATCH Command Processor
CZHYQ
VSS QUALIFY Command Processor
CZHYR
VSS REMOVE Command Processor
CZHYS
VSS SET Command Processor
CZHYT
VSS STOP Command Processor
VSS I/O Control
CZHZA
VSS AT SVC Processor
VSS I/O Initialization/Posting
CZHZF
VSS $AT/$PATCH Format
CZCWB
Build Common Portion of DEB
CZCWC
SAM Close Mainline
CZCWD
Direct Access OPEN
CZCWF
Tape Input Trailer Label Processor
CZCWB
Tape Input Header Label Processor
CZCWL
Build Direct Access DEB
CZCWM
SAM
CZCWO
SAM OPEN Mainline
CZCWP
Tape Positioning
CZCWR
Read Format 3 DSCB and chain
CZCWT
SAM OPEN Tape
CZCXC
Tape Output Label Creation
CZCXD
Direct Access Output End of Volume
CZCXE
SAM End-of-Volume Mainline
CZCXF
Tape Output Trailer Label Processor
CZCXH
Tape Output Header Label Processor
CZCXI
Direct Access Input End of Volume
CZCXN
Direct Access Input User Label Processor
CZCXO
Tape output End of Volume
CZCXS
Set DSCB
CZCXT
Tape Input End of Volume
CZCXU
Direct Access output User Label Processor
CZCXX
Concatenation
CZCYA
TAM OPEN
CZCYG
TAM CLOSE
CZCYM
TAM READ/wRITE
CZCZA
TAM POSTING
CZHNM
VSS Message
CZHNP
VSS Program Interrupt Processor
CZHNV
VSS Activate Interrupt Processor
CZHRT
VSS External Page Location Address
Translator
CZHSA
CZHSB
614
Shared Routines Message Processor
I~nguage
Control
APPENDIX B:
B-Ol. system Error Processor messages of the form
nnnn have the following reference data in common:
Message residence: CEAIS
Message issued by: CEAIS
Destination: Operator's Terminal
Transmittal technique: ERROR Macro
B-02. System Error Processor messages of the form
nnnnnnnnn have the following reference data in
common:
Message residence: CEAIS
Message issued by: CEAIS
Destination: operator's Terminal
Transmittal technique: SYSER Macro
B-03. Abnormal task termination (ABEND) messages
have the following in common:
Message issued by: CZACP
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: ABEND Macro
B-04. Except where noted, messages beginning with
line A *** have the following in common:
Message issued by: CEKTH
Destination
Conversational: User's Terminal; List Data
Set
Nonconversational: Task SYSOUT: List Data
Set
Transmittal technique: PUT Macro (if a List
Data Set exists); GATWR, by means of a CALL
to the LPC PUTDIAG entry (if in
conversational mode)
MESSAGE REFERENCE DATA
Requirement determined by: CEAAV
Variable data supplied by: CEAAV
Message residence: CEAAV
Message issued by: CEAAN
Destination: Operator's Terminal
Transmittal technique: A GQE with MeB pointer
is hung on the external interrupt queue of
the operator TSI.
B-08. Except where noted, messages beginning with
CEBxxxx have the following in common:
Destination
Conversational: N/A
Nonconversational: MSG device
Transmittal technique: I/O package for
independent utility programs.
E-09. Except where noted, messages beginning with
CEIFxxx have the following in common:
Requirement determined by: CEIFA
Variable data supplied by: N/A
Message residence: CEIFA
Message issued by: CEIFA
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: Terminal I/O
B-l0. Except where noted, messages beginning with
CHCIx have the following in common:
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATE
B-11. Except where noted, messages beginning with
***CHDxxx have the following in common:
B-05. Except where noted, command system messages
beginning with Annn or Bnnn have the following in
common:
Message residence: SYSMLF
Message issued by: MSGWR
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
'I'ransmi tta 1 technique: MSGWR
B-06. Except where noted, messages beginning with
ABEND have the following in common:
Requirement determined by: CZACP
Variable data supplied by: CZACP
Message residence: CZACP
Message issued by: CZACP
Destination: Operator's Terminal
Transmittal technique: WTO Macro
B-07. Except where noted, messages beginning with
CEAAV xxx have the following in common:
Message residence: CHDERMAC
Message issued by: CHDERMAC
Destination
Conversational: User's Terminal; List Data
Set
Nonconversational: Task SYSOUT; List Data
Set
Transmittal technique: MNOTE
B-12. Except where noted, messages beginning with
CZAxxnnn , CZBxxnnn and CZCxxnnn have the
following in common:
Message residence: SYSMLF
Message issued by: CZATJ
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: PRMPT
B-13. Except where noted, messages beginning with
CZCxx have the following in common:
Appendix B: Message Reference Data
615
Destination: Operator's Terminal
Transmittal technique: WTO Macro
B-14. Except where noted, command system messages
beginning with Dnnn have ~e following in common:
Message residence: SYSMLF
Message issued by: MSGWR
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: MSGWR
B-15. Except where noted, messages beginning with
line E ••• have the following in common:
Destination
Conversational: User's Terminal; List Data
Set
Nonconversational: SYSOUT; List Data Set
Transmittal technique: PUT Macro (if a List
Data Set exists); GATWR, by means of a CALL
to the LPC PUTDIAG entry (if in
conversational mode).
B-16. All messages beginning with ESAxxx have the
following in common:
Message issued by: CZABQ
Destination: Operator's Terminal
Tranmsittal technique: WTO Macro
B-17. All messages beginning with Ennn have the
following in common:
Message residence: SYSMLF
Message issued by: CZAHA
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: MSGWR
B-18. Except where noted, messages beginning with
line F *** have the following in common:
Message issued by: CEKTH
Destination
Conversational: User's Terminal; List Data
Set
Nonconversational: Task SYSOUT; List Data
Set
Transmittal technique: PUT Macro (if a List
Data Set exists); GATWR, by means of a call
to the LPC PUTDIAG entry (if in a
conversational mode).
B-19. Most PCS (Program Control System) messages
have the following in common:
Message residence: SYSMLF
Message issued by: CZANW
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: PRMPT
B-20. All messages beginning with OUT OF RANGE
PARAMETER have the following in common:
616
Message residence: CHCBZ
Message issued by: CHCBZ
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: EXIT Macro
B-21. Except where noted, messages beginning with
STARTUP have the following in common:
Message residence: CEIAA
Message issued by: CEIAA
Destination
Conversational: N/A
Nonconversational: Operator's Terminal
Transmittal technique: OWn I/O routine
B-22. Except where noted, messages beginning with
line W•• * have the following in common:
Destination
Conversational: User's Terminal; List Data
Set
Nonconversational: Task SYSOUT; List Data
Set
Transmittal technique: PUT Macro (if a List
Data Set exists); GATWR, by means of a CALL
to the LPC PUTDIAG entry (if in
conversational mode).
E-23. All messages beginning with module
identification CEHxx have the following in
co~mon:
Message residence: CEHCM
Message issued ty: CEHCM
Destination
Conversational: Master System Programmer's
(Operator's) Terminal
Nonconversational: N/A
Transmittal technique: TSSS I/O
B-24. All messages beginning with module
identification CZHxx have the following in common:
Message residence: CZHNM
Message issued by: CZHNM
Destination
Conversational: System Programmer's
Terminal
NODconversational: N/A
Transmittal technique: TSSS I/O
B-25. Except where noted, all messages beginning
with CZAW have the following in corr,mon:
Requirement determined by: CZAW module
identified in message text.
Variatle data supplied by: CZAW module
identified in message text.
Message residence: CZAWM
Message issued by: CZAWM
Destination: Operator's console
Transmittal technique: WTO macro instruction
B-26. Except where noted, Error Processor
messages of the form nnnnnnnnn have the following
reference data in common:
Message issued by: CEAIS
Destination: Operator's Terminal
Transmittal technique: SYSER macro
B-27. Messages containing this appendix reference
have the following in common:
Requirement determined by: CZCQV
Variable data supplied by: CZCQV
Message residence: CZCQV
Message issued by: CZCQV
Destination
Conversational: User's Terminal
Nonconversational: Task SYSOUT
Transmittal technique: GATWR
B-28. Messages with the CHCRW module identifier
have the following in common:
Message residence: SYSMLF
Message issued by: CHCRW
Destination
Conversational: User's terminal
Nonconversational: Task's SYSOUT
Transmittal technique: PRMPT macro instruction
B-29. Messages with the CZCDL module identifier
have the following in common:
Message residence: SYSMLF
Message issued by: CZCDL
Destination
Conversational: User's terminal
Nonconversational: Task's SYSOUT
Transmittal technique: PRMPT macro instruction
Appendix B: Message Reference Data
617
GC 28-2037-7
8
tn
tn
"<.oJ
a'"
G')
()
hl
co
I
hl
a
<.oJ
....,
....,I
International Business Machines Corporation
Data Processing Division
1133 Westchester Avenue, White Plains, New York 10604
[U.S.A. only]
I BM World Trade Corporation
821 United NatiDns Plaza, New York, New York 10017
[International]
IBJ.1
Technical Newsletter
File Number
5360-20
Base Publication No,
This Newsletter No.
Date
IBM System/360 Time Sharing System
System Messages
OIBM corp. 1967, 1968, !969, 1970, 1971
This Technical Newsletter provides replacement pages for the
subject publication.
Pages to be inserted and/or removed are:
341-346
391-392.1
401-!HO
417-420
A change to the text is indicated by a vertical line to the
left of the change.
Summary of Amendments
" Documentation for several SYSERR messages has been added.
o
Several messages issued by CZAEN have been added to
SYSMLF.
Documentation for these messages has been added,
•
REPRINTED BY BELL LABORATORIES WITH PERMISSION OF
IBIvI C
(;RATION.
iBM Corporation. Dept. 643, Neighborhood Road, Kingston, N. Y. 12401
GN28-3209
February 1, 1972
Previous Newsletters
5-30.2
73-74.1
259-260.1
271-272.1
305-306.1
GC28-2037-7
None
Technical Newsletter
File Number
S360-20
Base Publication No.
This Newsletter No.
Date
GC28-2037-7
GN28-3220
September 30, 1972
Previous Newsletters
GN28-3209
IBM System/360 Time Sharing System
System Messages
olBM corp. 1967,1968,1969,1970,1971
This Technical Newsletter provides replacement pages for the
subject publication. Pages to be inserted and/or removed are:
iii
5-60
61-66
(deleted)
143-146.1
373-374.1
435-438.1
Summary of Amendments
The entire section of SYSERR messages has been replaced.
Documentation has been added for several previously undocumented General Task Completion messages.
IBM Corporation, Dept. 80M, 1133 Westchester Ave., White Plains, N.Y.
PR'~T[D
I~
USA
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:56:37 Producer : Adobe Acrobat 9.13 Paper Capture Plug-in Modify Date : 2009:09:08 06:31:59-07:00 Create Date : 2004:02:22 12:38:49-06:00 Metadata Date : 2009:09:08 06:31:59-07:00 Creator Tool : HardCopy Format : application/pdf Title : Scanned Document Document ID : uuid:30836e3b-e3e1-4e65-bba3-9c8172bff95a Instance ID : uuid:b76f2fd6-4196-46d4-a508-f31685250d1c Page Count : 637 Creator : HardCopyEXIF Metadata provided by EXIF.tools