GY28 6717 3_PLM_Master__Rel_20.1_Sep71 3 PLM Master Rel 20.1 Sep71

GY28-6717-3_PLM_Master__Rel_20.1_Sep71 GY28-6717-3_PLM_Master__Rel_20.1_Sep71

User Manual: GY28-6717-3_PLM_Master__Rel_20.1_Sep71

Open the PDF directly: View PDF .
Page Count: 508

Download
Open PDF In Browser	View PDF

File No. 5360-20
Order No. GY28-6717-3

Program Logic

IBM System/360 Operating System
Program Logic Manual
Maste;r Index

Fourth Edition (September. 1971)
This is a major revision of, and obsoletes. GY28-6717-2 and
Technical Newsletter GN28-2447.
This edition applies to release 20.1 of IBM System/360
Operating system. The contents of this publication are subject to change from time to time. Changes will be reflected
in periodically updated editions. Before using this publication, consult the latest IBM System/360 SRL Newsletter. Order
No. GN20-0360. for the editions that are applicable and
current.
Requests for copies of IBM publications should be made to
your IBM representative or to the IBM branch office serving
your locality.
A form for reader's comments is provided at the back of
this publication. If the form has been removed. comments may
be addressed to IBM Corporation, Programming systems Publications, Department D58. PO Box 390, Poughkeepsie. N. Y.
12602
Comments become property of IBM.

© Copyright International Business Machines Corporation 1969.1970,1971

Preface

'I'his master index is provided to help you find
information in the program logic manuals for the
IBM System/360 Operating System. It lists topics
alphabetically, and refers you to pUblications
where these topics are discussed. The indexes of
these publications refer you to the appropriate
pages.
Topics are from indexes of publications listed
on the following page. Entries in the master
index refer to these publications by title, subject code, and order number. For eAample:
Attributes
in COBOL (F)

24 6Y28-6382

J

11

Title
Subject number
code -_
-_
-_
-_
-_
-_
-_
-_
-_
-_
-_
-_
-_
-_
-_
' ---l_
Order

An order nUIT,Der identifies a specific public ation;
a subject code indicates general subject matter.
Subject codes in the master index are as follows:
Subject COde
21
24
25
26
28
29
30
31
32
33
36
37

Subject
Assembler
COBOL
FORTRAN
ALGOL
Report Program Generator
PL/I
Input/Output Control System,
Data Management
system Service Programs
Utility Programs
sort/Merge
Control Program
Automatic 'l'esting Programs

Each SUbject code is part of a file number, which
identifies the system to which a publication applies.
For example:
File Number
S360-36
S360/1130-36

system
IBM System/360
IBM system/360,
IBM 1130 system

Subject
Control Program
Control Program

Libraries usually file publications by file number, that is, by system and subject code; publications for the same system and subject are filed by
order number.
If an index entry appears in several publications, the master index refers to each publication
and lists subentries separately for each:

Attributes
in COBOL (F)
in PL/I (F) COMPILER
consistency
consistency analyzed

24 GY28-6382
29 GY28- 6800

The subentries "consistency" and "consistency analyzed" appear under "Attributes" in the PL/I (F)
Compiler Program Logic Manual; no subentries
appear in the COBOL (F) Program Logic Manual.
The master index includes index entries from
many publications, and therefore includes many
entries that are similar.
To reduce redundancy,
entries beginning with the same word are grouped,
as in the following example:
Implicit file opening
in PL/I SUBROUTINE LIBRARY
IMPLICIT roll
in FORTRAN IV (G) COMPIL~R
Implicitly defined identifiers
in PL/I (F) COMPILER

29 GY28-6801.
",5 GY28-6638

29 GY28-6800

Each entry begins with a form of the word implicit, which is underscored the first time it
appears. Altered forms of the root word Implicit
such as Implicitly are also underscored.
A blank
line separates each group of similar entries.
Note that index entries may be either singular
or plural. Singular and plural entries for the
same topic do not always appear close together.
For example, "Call" and "Calls" may be separated
by "Called" and "Calling." You should therefore
look for topics in both singular and plural form,
and should note that verb forms may differ in
entries taken from different publications.
As in a dictionary, each page of the master
index is tabbed with the first letter of entries
appearing on the page. The first word of the
first primary entry on the left hand page and the
last primary entry on the right hand page are
indicated in headings. These headings are positioned at the top left of the left hand page and
the top right of the right hand page respectively.
Note: A reader's comments form is attached to the
back cover.
Please use this form for comments
regarding the content, arrangement, and tabbing of
this publication.

Preface

3

References

The master index refers to most of the program
logic manuals for the IBM System/360 Operating
system. It also refers to IBM System/360 Operating System: System Control Blocks, GC28-6628, a
&ystems Reference Library publication originally
published as a program logic manual. Other systems Reference Library publications are indexed in
the IBM System/360 operating system: systems
Reference Library Master Index, GC28-6644.
For a
complete list of all operating system publications, refer to the IBM system/360 Bibliography,
GA22-6822.
~ntries in the master index refer to publications by title, partial file number (subject
code), and order number.
Long titles are shortened to save space, and order numbers are shortened to eliminate suffixes (revision numbers).
Complete titles, file numbers, and order numbers
are as follows:

Fil e No., Order No.
ALGOL (F) Compiler PLM,(l) .••• S360-26,GY33-8000-0
ALGOL-to-PL/l Language
Conversion Program PLM,(3) ••••• S360-29,GY33-7006
Assembler (F) PLM,(l) ••••••••• S360-21,GY26-3700-2
Basic Direct Access Method
PLM, (1) • • • • • • • • • • • • • • • • • • • • • • S360-30, GY28-6617-5
Basic Telecommunications
Access Method PLM,(l) •••••••• S360-30,GY30-2001-4
Catalog Management PLM,(l) •••• S360-30,GY28-6606-2
COBOL (E) PLM, (1) • • • • • • • • • • • • • S360-24,GY24-5009-1
COBOL (F) PLM, (1) • • • • • • • • • • • • • S360-24,GY28-6382-2
COBOL-to-PLIl Language
Conversion Program PLM,(3) ••••• S360-29,GY33-7007
Conversational RJE PLM,(l) •••• S360-36,GY30-2011-0
Direct Access Device
space Management PLM,(l) ••••• S360-30,GY28-6607-7
Emulator program to Emulate the
IBM 709, 7090, 7094 and-7094II on
the IBM System/360 Model 85 •• S360-35,GY27-7187-0
FORTRAN IV (E) PLM,(l) •••••••• S360-25,GY28-6601-2
FORTRAN IV (G) Compiler
PLM, (1) •••••••••••••••••••••• S360-25,GY28-6638-1
FORTRAN IV (H) compiler
PLM, (1) •••••••••••••••••••••• S360-25,GY28-6642-4
FORTRAN IV-to-PL/l Language
Conversion Program PLM,(3) ••••• S360-29,GY33-7000
FORTRAN IV Syntax Checker, (1). S360-25,GY28-6831-2

Graphic Job Processor Support
PLM, (1) • • • • • • • • • • • • • • • • • • • • • • S360-36,GY27-7159-1
Graphic Subroutine Package (GSP)
for FORTRAN IV, COBOL,
and PL/I PLM,(l) ••••••••••••• S360-25,GY27-7152-1
Graphics Access Method PLM,(l) S360-30,GY27-7113-5
Graphics Problem Oriented
Routines PLM,(l) ••••••••••••• S360-30,GY27-7110-1
IBM 1419 Magnetic Character Reader
IBM 1275 Optical Reader Sorter
Device Dependent BSAM PLM •••• S360-30,GY21-0012-0
Indexed Sequential Access
Methods PLM,(1) ••••••.••••••• S360-30,GY28-6618-4
Initial Program Loader and
Nucleus Initialization
Program PLM,(l) •••••.•••••••• S360-36,GY28-6661-4
Input/Output supervisor
PLM, (1) • • • • • • • • • • • • • • • • • • • • • • S360-30 ,GY28-6616-8
Input/Output Support
(OPEN/CLOSE/EOV) PLM,(l) ••••• S360-30,GY28-6609-5
Introduction to Control
Program Logic PLM,(l) •••••••• S360-36,GY28-6605-4
Job Management PLM,(l) •••••••• S360-36,GY28-6613-5
Job Management with MFT
PLM, (1) • • • • • • • • • • • • • • • • • • • • • • S360-36,GY27-7128-6
Linkage Editor (F) PLM,(l) •••• S360-31,GY28-6667-1
Loader PLM,(l) •••••••••••••••• S360-31,GY28-6714-1
Machine-Check Handler for IBM
System/360 Model 65 PLM,(l) •• S360-31,GY27-7155-2
Machine-Check Handler for IBM
system/360 Model 85 PLM,(l) •• S360-31,GY27-7184-1
MFT supervisor PLM,(l) •••••••• S360-36,GY27-7236-0
Machine Check Handler for
S/370 Models 135 and 145
PLM, (1) ••••••••••••••••••••••••• S370,GY27-7237-0
Machine Check Handler for
S/370 Models 155 and 165
PLM,(l) •••••••••••••••••••••• S360-30,GY27-7198-0
MVT Control Program Logic
Summary PLM, (1) •••••••••••••• S360-36,GY28-6658-4
MVT Job Management PLM,(l) •••• S360-36,GY28-6660-8
MVT Supervisor PLM,(l) •••••••• S360-36,GY28-6659-5
Online Test Executive Program
PLM,(l) •••••••••••••••••••••• S360-37,GY28-6651-4
PL/I _(F) Compiler PLM, (1) ••••• S360-29,GY28-6800-4
PL/I Subroutine Library, (1) ••• S360-29,GY28-6801-5
PL/I Syntax Checker PLM, (1) ••• S360-29,GY33-8009-0
Program to Emulate the IBM 7074
on the s/370 Model 165
using 08/360 PLM,(l) •••••••••••• S370,GY27-7228-0

1This list represents the first part of each title as follows:
(1) IBM System/360 Operating system
(2) IBM System/360 Operating System and 1130 Disk Monitor System
(3) IBM System/360 Conversion Aids
(4) IBM System/360 Operating System Time Sharing Option
In each title, the phrase" Program Logic Manual"
is abbreviated as "PLM."

4

PLM Master Index (Release 20.1)

Queued Telecommunications
Access Method PLM.(l) •••••••• S360-30,GY30-2002-2
Remote Job Entry PLM,(l) •••••• S360-36,GY30-2005-4
Sequential Access Methods
PLM, (1) ••••••••••••••••••••••
Sort/Merge PLM,(l) ••••••••••••
system Control Blocks,(l) •••••
system/360 Job Processing From
a Remote 1130/2250 Subsystem
PLM, (2) ••••••••••••••••••••••

S360-30,GY28-6604-4
S360-33,GY28-6597-3
S360-36,GC28-6628-4
S360/1130-36,
GY27-7166-0

System/360-1130 Data Transmission For FORTRAN PLM, (2) •• S360/1130-25,
GY27-7161-0

TCAM PLM,(l) •••••.•••••••••••• S360-30,GY30-2029-1
TCAM serviceability Aids
PLM, (1) • • • • • • • • • • • • • • • • • • • • • • S360-30,GY30-2027-0
TESTRAN PLM, (1) ••••••••••••••• S360-37,GY28-6611-0

TSO Catalog Management
PLM, (4) ••••••••••••••.•••••••
TSO Command Processor, Vol 1
PLM,(4) ••••••••••••••••••••••
TSO Command Processor, Vol 2
PLM, (4) ••••••••••••••••••••••
TSO Command Processor, Vol 3
PLM, (4) ••••••••••••••••••••••
TSO Command Processor, Vol 4
PLM, (4) •••••••••••••••••••••.
TSO Command Processor, Vol 5
PLM, (4) ••••••••••••••••••••••
TSO Command Processor, Vol 6
PLM, (4) ••••••••••••••••••••••
TSO Command Processor, Vol 7
PLM,(4) ••••••••••••••••••••••
TSO Control Program PLM,(4) •••
TSO Terminal Monitor Program
and service Routines PLM,(4).

S360-36,GY28-6745-0
S360-36,GY28-6771-0
S360-36,GY28-6772-0
S360-36,GY28-6773-0
S360-36,GY28-6774-0
S360-36,GY28-6775-0
S360-36,GY28-6776-0
S360-36,GY28-6777-0
S360-36,GY27-7199-1
S360-36,GY28-6770-0

Update Analysis Program
PLM,(l) •••••••••••••••••••••• S360-36,GY28-7106-0
Utilities PLM, (1) • • • • • • • • • • • • • S360-32,GY28-6614-7

References

5

6

PLM Master Index (Release 20.1)

Prerequisites to Program Logic Manuals

Each publication listed below is a prerequisite to
one or more program logic manuals, and is identified by its form number in the reading plan on the
following page.
Form No.
C24-3337
C24-5029

RPG Language Specifications
COBOL (E) Programmer's Guide

C27-6918
C27-6937

Maintenance Program 360S-UT-506
System/360-1130 Data Transmission for
FORTRAN

C28-6380
C28-6514
C28-6515
C28-6516
C28-6586
C28-6615
C28-6628
C28-6629

COBOL (F) Programmer's Guide
Assembler Language
FORTRAN IV Language
COBOL Language
Utilities
ALGOL Language
system Control Blocks
Basic FORTRAN IV Language

C28-6631
C28-6647
C28-6648
C28-6650
C28-6703
C28-6704
C28-6817
C28-8201
C33-2000
C33-2001
C33-2002

Y27-7199

Messages and Codes
Supervisor and Data Management Macro
Instructions
Testran
Online Test Executive Program
Job Control Language User's Guide
Job Control Language Reference
FORTRAN (G and H) Prograwmer's Guide
PL/I Reference Manual
ALGOL-to-PL/I Language Conversion Program for IBM System/360 Operating
System
COBOL-to-PL/I Language Conversion Program for IBM system/360 Operatinq
System
FORTRAN IV-to-PL/I Language Conversion
Program for IBM System/360 Operating
system
TSO Control Program

Prerequisites

7

8

PLM Master Index (Release 20.1)

IBM System/360 Operating System
Pi·ogram Logic Manuals For Release 20.1
. C28-6628
C28-6647
Program Logic Manual
Master Index
Catalog Managememt

Initial Program Loader
and Nucleus
Initialization Program

Y28-6606

Y28-6661

Y28-6717

Note:
Arrows indicate logical associations and
interdependencies of programs, not a
suggested redding plan.
Familiarity with associated SRLs is assumed.

JOB CONTROL
Introduction to Control
Program Logic (PCP)
Y28-6605

Remote Job Entry
Program

Conversationa I Remote
Job Entry

Graphic Job Processor

Y30-2005

Y30-2011

Y27-7159

~.----~------~

Job Processi ng from a
Remote 1130/2250
Subsystem
Y27-7166

PCP Job Management

Job Management
with MFT

MVT Job Management

TSO Control Program

Y28-6613

Y27-7128

Y28-6660

Y27-7199

/

SUPERVISOR

~------~~------~

PCP Supervisor

MFT Supervisor

MVT Supervisor

Y28-6612

Y27-7236

Y28-6659

-

1--

_.

1··-

ACCESS METHODS

I

Sequential Access

I

J

Indexed Sequential
A _____ .. A.... .LL_..J

1__ I

Basic Telecommunications
A __ o ..

Ho.h~,.l

1

Graphics Ac cess
Mpthnrl

TCAM

1

-

-

ACCESS METHODS

,

~------~~-~

Sequential Ac cess
Methods

Indexed Sequential
Access Method

Basic Telecommunications
Access Method

Graphi cs Access
Method

Y28-6604

Y28-6618

Y30-2001

Y27-7113

TCAM

Y30-2029

t
I

,

1

Basi c Direct Access
Method (BDAM)

Graphics Probl em
Oriented Routines

Y28-6617

Y27-7110

Queued
Te lecommuni cations
Access Method
Y30-2002

,.

DEVICE SUPPORT and SUPERVISION

__ J__ _

Direct Access Device
Spa ce Management
(DADSM)

IBM 1419 Magnetic
Character Reader, 1275
Optical Reader-Sorter

Y28-6607

Y21-0012

IBM 1285, 1287, 1288
Optical Readers
Y21-0013

I ,..--------,I
I

Input/ Output Support
(OPEN/ CLOSE/ EOV)

Y28-6609

Input/ Output Supervisor

I
I

i

I
I

I
I

Machine-Check Handler
for System/ 360 Model 65
Y27-7155

Y27-7237
Machine-Check Handler
for System/ 360 Model 85
Y27-7184

I
Y28-6616

Machine-Check Handler
for System/ 370 Models
135 and 145

Machine-Check Handler
for System/ 370 Models
155 and 165
Y27-7198

:

L______ ---1

TEST-UPDATE-·UTiLITIES
C28-6648

C27-6918

C28-6586

Online Test Executive
Program (OLTEP)

TESTRAN

Update Analysis Program

Utilities

TCAM Servi ceabi Iity
Aids

Y28-6651

Y28-6611

Y27-7106

Y28-6614

Y30-2027

C28-6650

+

TSO Command
Processor Vo I. 7 - Test
Y28-6777

SUPPORT PROGRAMS

Y27-7199

Linkage Editor (E)
Y28-6610

Loader

Li nkage Ed i tor (F)
Y28-6667

Y28-6714

Emulate
1401/1440/ 1460 on Model 155
1410 and 7010 on Model 155
709, 7090, 7094, 7094 non Model 85
1401/1460 for Model 40
7074 for Models 50 and 65

Sort/ Merge

Y27-7225
Y27-7226
Y27-7187
Y27-7103
Y27-7111

ASSEMBLERS, COMPILERS
C28-6514

•

Assembler (32K)
Y26-3578
Assembler (64K)
Y26-3700

C28-8201

PL./I (F) Compi ler

Y28-6800

TSO Command
Processor Vol. 3-Edit

C24-5029
C28-6516

C28-6631
C28-6629

•

COBOL (E)
Y24-5009
COBOL (F)
Y28-6382

•

Report Program
Generator

PL./I Subroutine Library

American National
Standard COBOL

Y26-3704

Y28-6801

Y28-6395

C28-6615

•

r

ALGOL

PL./I Syntax Checker

Y33-8000

Y33-8009

C33-2ODI

C33-2002

•

FORTRAN to PL/ I
Y33-7000

Vol.
Vol.
Vol.
, Vol.
Vol.

Y28-6770

Graphic Programming
Services for FORTRAN
N, COBOL, PL./I
Y27-7152

C28-6380

C24-3337

•

Y28-6597

TS 0 Command Processors

TSO Terminal Monitor
Program

1
2
4
5
6

Y28-6771
Y28-6772
Y28-6774
Y28-6775
Y28-6776

••

FOR TRA N TIl (E)

Y28-6601
C27-6937

•

System/ 360-1130 Data
Transmi ssion for
FORTRAN
Y27-7161

I,;

FORTRAN NSyntax
Checker

(Special Characters) - A

11

.n.

operator
in FORTRAN IV SYNTAX CH~CK~H PLM
25 GY28-6831
assembler language equivalent for
description of
displacement conventions for
< operator
in FORTRAN IV SYN'l'AX CHECKER PLM
25 GY28-6831
assembler language equivalent for
description of
displacement conventions for
effect on qualification list

<=

in PL/I SYNTAX Cri~CKER PLM
29
operator
in FORTRAN IV SYNTAX CHhCKER PLM
25
assembler language equivalent for
description of
displacenent conventions for
+passive line operator
in FORTRAN IV SYNTAX CHECKER PLM
25
assembler language equivalent for
displacement conventions for
effect on source pointer
reference to
scan of
+table name operator
in FORTRAN IV SYNTAX CHECKER PLM
25
operator
in FORTRAN IV SYNTAX CHECKER PLM
25
assembler language equivalent for
description of
displacement conventions for
& (ampersand) usage
in TSO COMMAND PROCESSOR VOL4-EXEC 36
&, a operator
in FORTRAN IV SYNTAX CHECKER PLM
25
assembelr language equivalent for
description of
displacement conventions for
&a operator
in FORTRAN IV SYNTAX CHECKER PLM
25
assembler language equivalent for
description of
displacement conventions for
&ARGxx
in COBOL-To-PL/l LCP
29
&PARMxx
in COBOL-TO-PL/1 LCP
29
$CONAEX
in ALGOL-To-PL/1 LCP
29
$ CON BEX
in ALGOL-TO-PL/1 LCP
29
$n operator
in FORTRAN IV SYNTAX CHECKER PLM
25
assembler language equivalent for
description of
displacement conventions for
$P$REC
in COBOL-TO-PL/l LCP
29
$RTURN
in ALGOL-To-PL/1 LCP
29
$SwALxx
in COBOL-To-PL/l LCP
29
$SWALxxx
in COBOL-To-PL/1 LCP
29
$swARLxx
in COBOL-TO-PL/l LCP
29
$SWDEPxx
in COBOL-TO-PL/l LCP
29

* - in
**

GY28-6831

GY28-6831

GY28-6831
GY28-6831

GY33-8009
GY28-6771
GY28-6831
GY28-638",
GY28-6831

GY27-7166
GY28-6831

GY28-6382
GY28-6831
GY28-6831

/*

in PL/I SYNTAX CHECKER PLM

29 GY33-8009

//

GY28-6774
GY28-6831

GY28-6831

in PL/I SYNTAX CHECKER PLM
29 GY33-8009
,Iaa
operator)
in FORTRAN IV SYNTAX CHECKER PLM
25 GY28-6831
assembler language equivalent for
description of
displacement conventions for
> operator
in FORTRAN IV SYNTAX CHECKER PLM
25 GY28-6831
assembler language equivalent for
description of
displacement conventions for

>=
GY33-7007
GY33-7007
GY33-7006
GY33-7006
GY28-6831

GY33-7007

in PL/I SYNTAX CHECKER PLM
29
: operator
in FORTRAN IV SYNTAX CHECKER PLM
25
assembler language equivalent for
description of
displacement conventions for
'aa
in FORTRAN IV SYNTAX CH~CKER PLM
25
assembler language equivalent for
de sc ri pti on of
displacement conventions for
'call sets,
in PL/I SUBROUTINE LIBRARY
29

GY33-8009
GY28-6831

GY28-6831

GY28-6801

in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777

GY33-7006
GY33-7007
GY33-7007
GY33-7007
GY33-7007

TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773

in PL/I SYNTAX CHECKER PLM
**, restriction on use
in FORTRAN IV SYNTAX CHECKER PLM
*/

GY33-8009

in PL/I SYNTAX CHECK~R PLM
29
*, as userid
in TSO COMMAND PROCESSOR VOL1-LIST 36
*, restriction on use
in FORTRAN IV SYNTAX CHECKER PLM
25
*DEBUG
in COBOL on
24
*n operator
in FORTRAN IV SYN']:AX CriECKER PLM
25
assembler language equivalent for
description of
displacement conventions for
*SGJ~ option on GRIN frame
in S/360 JOB PROCESSING 1130/2250 36
operator
in FORTRAN IV SYNTAX CHECKER PLM
25
assembler language equivalent for
description of
displacement conventions for
-nnnn (Report Writer data name)
in COBOL (F)
24
-table name operator
in FORTRAN IV SYNTAX CHECKER PLM
25
/ operator
in FORTRAN IV SYNTAX CHECKER PLM
25
assembler language equivalent for
description of
displacement conventions for

29 GY33-8009
25 GY28-6831

A code
in FORTRAN IV-TO-PL/l LCP
A-format code
in FORTRAN IV-TQ-PL/l LCP
A format items
in PL/I SUBROUTINE LIBRARY
A operator
in FORTRAN IV SYNTAX CHECKER PLM
A-Text
in COBOL (F)
A-Text, generation of
in COBOL (F)

29 GY33-7000
29 GY33-7000
29 GY28-6801
25 GY28-6831
24 GY28-6382
24 GY28-6382

12

A - Abend
A-Text generator routines
in COBOL (F)
A-type address constant
in LINKAGE EDI~OR (F)
del inking of
description
relocation of
RLD processing for
in LOADER
purpose of

24 GY28-6382
31 GY28-6667

31 GY28-6714

AA'J.'

in s/360 JOB PROCESSING 1130/2250

36 GY27-7166

Abbreviated record
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
Abbreviated record (ABREC)
in MAChINE-CHECK HANDLER, M135/145 30 GY27-7237
Abbreviations
in LOADER
dictionary of
Abbreviations, list of
in GRAPHIC JOB PROCESSOR SUPPORT
Abbreviations and acronyms
in S/360-1130 DATA TMN. - FORTRAN
Abbreviations and mnemonics
in GRAPHICS ACCESS METHOD
Abbreviations of routine names
in CATALOG MANAGEMENT
in TSO CATALOG MANAGEMENT
Abbreviations used during
compilation
in PL/I (F) COMPILER
ABB37, in
---rn
TSO

WORKAREA
COMMAND PROC VOL6-SUBMIT

31 GY28-6714
36 GY27-7159
25 GY27-7161
30 GY27-7113
30 GY28-6606
36 GY28-6745
29 GY28-6800
36 GY28-6776

ABDU~,P

~MFT SUPERVISOR

entry point
entry/exit tanle
flowchart
functional description
module description
module synopsis
parameter list format
ABDUMP "resident" module
in MVT SUPERVISOR
description of
entry pOint name of
module name for
ABDUMP nondispatchability flag
in MVT SUPERVISOR
clearing the
ABDUMP parameter list
in MVT SUPERVISOR
format of
ABDUMP routine
in MVT SUPERVISOR
description of
flowchart of
synopsis of
ABDUMPl
in MVT SUPERVISOR
description of
entry point name of
module name for
ABDUMPl
in MVT SUPERVISOR
description of
entry point name of
module name for
ABDUMPll

36 GY27-7236

in MVT SUPERVISOR
description of
entry point name of
module name for
ABDUMP2
in MVT SUPERVISOR
description of
entry point name of
module name for
ABDUMP3
in MVT SUPERVISOR
description of
entry point name of
module name for
ABDUMP4
in MVT SUPERVISOR
description of
entry point name of
module name for
ABDUMP5
in MVT SUPERVISOR
description of
entry point name of
module name for
ABDUMP6
in MVT SUPERVISOR
description of
entry point name of
module name for
ABDUMP7
in MVT SUPERVISOR
description of
entry pOint name of
module name for
ABDUMP8
in MVT SUPERVISOR
description of
entry point name of
module name for

36 GY28-6659

36 GY28-6659
36 GY28-6659
36 GY28-6659

36 GY28-6659

36 GY28-6659

ABDUMP9
in MVT SUPERVISOR
description of
entry point name of
module name for

36 GY28-6659

36 GY28-6659

36 GY28-6659

36 GY28-6659

36 GY28-6659

36 GY28-6659

36 GY28- 6659

36 GY28-6659

36 GY28-6659

Abend
in TESTRAN
37
ABEND
in MACHINE-CHECK HANDLER, M135/145 30
in MACHINE-CHECK HANDLER, M155/165 30
in MFT SUPERVISOR
36
entry/exit table
functional description
recursion processing
in TSO COMMAND PROC VOLI-DELETE
36
flags and return codes
processing
in TSO COMMAND PROC VOL6-WHEN/END 36
in TSO COMMAND PROCESSOR VOL7-TEST 36
handling of in Test
retry in Mainline (general)
ABEND, scratch data sets in case of
in TSO COMMAND PROC VOL6-SUBMIT
36
Abend completion Code Message Attributes
Table (IKABENDA)
in GRAPHIC JOB PROCESSOR SUPPORT
36
format of
use by IKAPSMBO

GY28-6611
GY27-7237
GY27-7198
GY27-7236

GY28-6771
GY28-6776
GY28-6777

GY28-6776
GY27-7159

13

Abend Completion Code !I1essage Attributes
ITable (IKABENDA)
l--------------------------------------(continued)
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
Abend Completion Code Message Text Table
(IKABENDl>
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
format of
use by IKAPSMBO
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
~BEND conditions
in GRAPHICS ACCESS METHOD
30 GY27-7113
in 'ISO COMMAND PROCESSOR VOL1-ACC,[' 36 GY28-6771
exit routine for
processing of
return codes from
ABEND handling, provides for
in TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6775
Abend Hook Routine
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
chart
description of
Abend Hook Routine (IKABDHK)
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
chart
description of
ABEND Interface routine (IITOSDAB)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
description
flowchart
ABl!.ND macro
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
ABEND macro instruction
25 GY27-7152
in GRAPHIC SUBRTN. PACKAGE
in INTRO. TO CONTROL PROGRAM LOGIC 36 GY28-6605
36 GY28-6613
in JOB MANAGEMENT
ABEND modules
36 GY28-6659
in MVT SUPERVISOR
description of
flowchart of
synopsis of
ABEND processing
in TSO COMMAND PROC VOL 1- BROADCAST 36 GY28-6771
in TSO COMMAND PROC VOL1-SUBRTNS
36 GY28-6771
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY28-6772
in TSO COMMAND PROC VOL2-DELl!.TE
36 GY28-6772
in TSO COMMAND PROC VOL4-LISTBC
36 GY28-6774
in TSO COMMAND PROC VOL5- LIST CAT
36 GY28-6775
description of
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
in TSO COMMAND PROC VOL6-PROFILE
36 GY28-6776
36 GY28-6776
in ,['SO COMMAND PROC VOL6-RENAME
in TSO CO~lMAND PROC VOL6-TERMINAL 36 GY28-6776
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
in TSO COMMAND PROCESSOR VOL4-EXl!.C 36 GY28-6774
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
ABEND processing (abnormal
termination)
36 GY28-6774
in TSO COMMAND PROC VOL4-LISTALC
ABEND routines
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
ABEND/STAE interface routine
in TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6775
ABEND/STAE Interface Routines
36 GY27-7236
in MFT SUPERVISOR
functional description
36 GY28-6659
in MVT SUPERVISOR
description of
entry point names of
flowcharts of

Abend - ABENTAB
module name(s) for
in TSO CO~~ND PROCESSOR VOL7-TEST
description of
ABl!.ND to module
cross-reference
in INPUT/OUTPUT SUPPORT
ABEND 0
in MFT SUPERVISOR
entry point
flowchart
module description
mOQule synopsis
ABENDPSW, field in STAEWA
in TSO COMMAND PROC VOL5-0PERATOR
ABENDRTN subroutine of IKAPSMBO
in GRAPHIC JOB PROCESSOR SUPPORT
in S/360 JOB PROCESSING 1130/2250
ABENDS, and interrupts
---rn-TSO CO~~ND PROC VOL5-oUTPUT
ABEND1
---rn-MVT SUPERVISOR
description of
entry point name of
flowchart(s) of
module name for
ABEND2
---rn-MVT SUPERVISOR
description of
entry point name of
flowchart (s) of
module name for
ABEND3
---rn-MVT SUPERVISOR
description of
entry point name of
flowchart(s) of
module name for
ABEND4
---rn-MVT SUPERVISOR
description of
entry point name of
flowchart(s) of
module name for
ABl!.ND5
---rn-MVT SUPERVISOR
description of
entry point name of
flowchart(s) of
module name for
ABEND 6
---rn-MVT SUPERVISOR
description of
entry point name of
flowchart(s) of
module name for
ABEND7
---rn-MVT SUPERVISOR
description of
entry point name of
flowchart of
module name for
ABEND 8
---rn-MVT SUPERVISOR
description of
entry point name of
flowchart of
module name for
ABEND 9
---rn-MVT SUPERVISOR
description of
entry point name of
flowchart of
module name for

36 GY28-6777

30 GY28-6609
36 GY27-7236

36 GY28-6775
36 GY27-7159
36 GY27-7l66
36 GY28-6775
36 GY28-6659

36 GY28-6659

36 GY28-6659

36 GY28-6659

36 GY28-6659

36 GY28-6659

36 GY28-6659

36 GY28-6659

36 GY28-6659

ABENTAB (field in test communication table)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777

ABENTAB -

Absolute

ABEN'I'AB (field in test communication table)
I in TSO COMMAND PROCESSOR VOL7-TEST 36 Gy28-6777
L--------------------------------------(continued)
description of
ABEN'I'ABl (field in test communication
table)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description of
Abnormal completion of request
in BASIC DIRECT ACCESS METHOD
30 GY28-6617
Abnormal condition
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
handling of
Abnormal disposition indicator
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
Abnormal dump
36 GY28-6659
in MVT SUPEt
in Dimension attribute
lowerupper-

29 GY28-6800
31 GY28-6714

31 GY28-6667
36 GY28-6661
36 GY27-7236

36 GY27-7128
36 GY28-6661
29 GY33-8009

BPAM access addresses, updating of
in TSO COMMAND PROC VOL1-SUBRTNS
36 GY28-6771
BPAM access method
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771
BPAM DCB address
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

BPAM DECB address, extraction of
in TSO COMMAND PROC VOL1-SUBRTNS
BPAM routine
in BASIC DIRECT ACCESS METHOD
BPAM routines
in SEQUENTIAL ACCESS METHODS
description of
effect of BLDLTAB option
introduction to
relation to BSAM routines
relation to processing program
residence of
BPQCTLFW
in CRJE PLM

36 GY28-6771
30 GY28- 6617
30 GY28-6604

36 GY30-2011

in PL/I SYNTAX CHECKER PLM

29 GY33-8009

BPTFLAG
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

BPTP
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

BRACKCNT
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

BRAM Read/Write subroutines
----in QUEUED TELECOMM. ACCESS METHOD

30 GY30-2002

Branch
---rn-FORTRAN IV (H) COMPILER
25 GY28-6642
candidate
constant
instruction optimization
operator (B)
operator (other)
optimization
OPT=1
OPT=2
processing, phase 25
table
entry
text entry
true or false skeleton instructions
variable
BRANCH
in FORTRAN IV-TO-PL/l LCP
29 GY33-7000
Branch list table for referenced statement
numbers
in FORTRAN IV (E)
25 GY28-6601
allocation of storage for
format of
generation of
object-time use of
Branch list table for statement function
expansions and DO statements
in FORTRAN IV (E)
25 GY28-6601
allocation of storage for
format of
generation of
object-time use of
Branch on index high, low, or equal
in FORTRAN IV (H) COMPILER
25 GY28-6642
Branch register
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
Branch table
in FORTRAN IV (G) COMPILER
25 GY28-6638
assigning storage for
description
position in object module
use in Allocate
use in Exit
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
in operation diagram

45
Branch table
I in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
L--------------------------------------(continued)
used by SVC 59
BRANCH TABLE roll
in FORTRAN IV (G) COMPILER
25 GY28-6638
description
in Allocate
in Exit
Branch target label
in FORTRAN IV (G) COMPILER
25 GY28-6638
Branch-type address constant
in LINKAGE EDITOR (F)
31 GY28-6667
Branching formulas
in PLII SYNTAX CHECKER PLM
29 GY33-8009
ERRMSG
TOKENTST
TOKTEST
branching optimization
in FORTRAN IV (H) COMPIL~R
25 GY28-6642
block determination for
OPT=l
OPT=2
BRB
in QUEUED TELECOMM. ACCESS METHOD
BRB ring routine
in QUEUED TELECOMM. ACCESS ~THOD
chart

30 GY30-2002
30 GY30-2002

BRC
in LINKAGE EDITOR (F)
BRC symbol
in FORTRAN IV SYNTAX CHECKER PLM
BRDCST (broadcast) command processor
in REMOTE JOB ENTRY
BRDCST central command processor
in CRJE PLM
entry point code
flowchart
microfiche directory
module description
register usage
BRDCSTR command processor
in REMOTE JOB ENTRY
BRDR
in
in
in
BRDR,
in

TSO
TSO
TSO
and
TSO

31 GY28-6667
25 GY28-6831

in TSO COMMAND PROC VOL6-TERMINAL 36
number
parameter
Break point table (BPT)
in PL/I SYNTAX CHECKER PLM
29
BPTFLAG in COMFLAGl
BPTP, pointer to BPT
in DATAAREA DSECT
BREAKFL (break character flag)
in PL/I SYNTAX CHECKER PLM
29
for translation
Breakoff routine
in QUEUED TELECOMM. ACCESS METHOD 30
chart
Breakpoint
in TSO COMMAND PROCESSOR VOL7-TEST 36
definition of
handler (SVC 97 routine)
module description of
processing of breakpoints
pseudo breakpoint, handling of
description of
diagram of
how particular Test modules set
pseudo breakpoints
breakpoint SVC (SVC 97 routine)
module description of
user breakpoint handling
activating deferred breakpoints
clearing breakpoints
executing user breakpoints
setting user breakpoints
BREAKTAB (field in test communication
table)
in TSO COMMAND PROCESSOR VOL7-TEST 36
description of

GY28-6776

GY33-8009

36 GY30-2011

BRK
---in TSO COMMAND PROC VOL6-TERMINAL
field name in PDL

GY33-8009
GY30-2002
GY28-6777

GY28-6777

36 GY28-6776

BRLGL-IEKVBL

---rn FORTRAN

IV (H) COMPILER

BRNPRO
---rn-FORTRAN IV-TO-PL/l LCP

25 GY28-6642
29 GY33-7000

36 GY30-2005

COMAND PROC VOL2-CNCL/STATUS36
COMMAND PROC VOL5-0UTPUT
36
CONTROL PROGRAM
36
FIB facility
COMMAND PROC VOL6-SUBMIT
36

GY28-6772
GY28-6775
GY28-7199
GY28-6776

Break character ( )
PL/I SYNTAX-CHECKER PLM
29 GY33-8009
within identifier
Break element
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
example of use
format of
Break element queue
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
adding elements to
description of
illustration of
removing elements from
BREAK keyword

Broadcast
in TSO COMMAND PROC VOL4-LISTBC
36
NOTICES message
to terminals
Broadcast and message data set dequeuer
in REMOTE JOB ENTRY
36
Broadcast data set
in TSO COMMAND PROC VOLI-BROADCAST 36
I/O buffers
volume serial number
in TSO COMMAND PROC VOLI-DELETE
36
in TSO COMMAND PROC VOL5-0PERATOR 36
directory record
message entry
notice messages
record one
to close
to open
user mail
in TSO COMMAND PROCESSOR VOLI-CHNG 36
in TSO COMMAND PROCESSOR VOL6-SEND 36
Broadcast data set interface processing
in TSO COMMAND PROC VOLI-BROADCAST 36
basic operations in
control module
data areas for
error messages from
interface hierarchy
I/O processing module

II;

:.

36 GY30-2005

BRDRQ
in TSO COMAND PROC VOL2-CNCL/STATus36 GY28-6772
in TSO COMMAND PROC VOL5-0UTPUT
36 GY28-6775
in TSO COMMAND PROC VOL6-SUBMIT
36 GY28-6776
FIB and
MVT and

--rn

Branch - Broadcast

GY28-6774

GY30-2005
GY28-6771
GY28-6771
GY28-6~75

GY28-6771
GY28-6776
GY28-6771

Broadcast -

BS~NO~

_______________________________

4~6~

Broadcast data set interface processing
I in TSO COMMAND PROC VOL1-BROADCAST 36 GY28-6771
L--------------------------------------(continued)
message module residence
register summary
termination of
updating user ids
BROAPCAST data set processing
in rso COMMAND PROCESSOR VOL1-ACC~ 36 GY28-6771
event control block for
main control module for
parameter list for
updating userid list
Broadcast directory record, points to
first
in TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6775
Broadcast flags
in TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6775
Broadcast message file
in CRJE PLM
36 GY30-2011
Broadcast messages
in CRJ£ PLM
36 GY30-2011
Broadcast notices
in TSO COMMAND PROC VOL6-WH~N/END 36 GY28-6776
Brothers
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
Bf SERVICE ROU'!'INES

36 GY28-6770

CBxxxxxx
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
fields in E01DATDF
CCCODE
---rn-PL/I (F)
25 GY28-6642
36 GY28-6613
36 GY27-7159

36 GY27-7166

29 GY28-6800

Catastrophic conditions (MCH)
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
Catastrophic error in I/O
supervisor
in MACHINE-CHECK HANDLER, S360 M85 31 GY27-7184
Catastrophic errors
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
CATLG
in
CATLG
in
CATLG
in

CBCMSGNO, field in COMMON
in TSO COMMAND PROC VOL5-0PERATOR

37 GY28-6651

36 GY28-6613
30 GY28-6606
36 GY28-6745
36 GY28-6776

CAW (channel address word)
---in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
data area layout
defined in glossary
described in module directory
in data area directory
in start I/O operation (diagram)
with unit record devices

COMPI~R

29 GY28-6800

CCH
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
CCH, interface to and recording
for
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
CCH (channel check handler)
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
creation of inboard record
described in module directory
diagram of its connection with other
programs
entry indicator byte
formation of interface (diagram)
functions of
operation of (diagram)
production of the ERPIB
routines invoked by SERR interface
routine
selection of proper routine
SER/CCH interface
described in module directory
used as an option in error recovery
routines
1052 error routine
1285, 1287, and 1288 error
1404 and 1443 error routines
1419/1275 error routine
2250 error routine
2260 and 1053 error routine
2301, 2302, 2303, 2305, 2311,
2495 error routine
2540 error routine
5350 error routine
in -MACHINE-CHECK HANDLER, s360 M85 31 GY27-7184
entry to MCH/85 from
CCH Initialization routine
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
CCHHR table-IFCEREPO
---rn UTILITH:S

(165)
32 GY28-6614

CCODEPTR, in EXITPARM
in TSO COMAND PROC VOL2-CNCL/STATUS36 GY28-6772

55
CCOMMANO, in History
ill TSO COMMAND PROC VOL6-SUBMIT

CCOMMAND - CDRBP

in MVT SUPERVISOR

36 GY28-6659
36 GY28-6659

36 GY28-6776

CCOMMON, in History
in TSO COMMAND PROC VOL6-sUBMIT

36 GY28-6776

CDCONTRL
in MVT SUPERVISOR
use of

CCONERR, in History
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

CDD, in History
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

CCONEX, in History
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

CDDAST, in History
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28- 6776

36 GY30-2011

CDDATA, in History
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

CDDESTRY routine
in MVT SUPERVISOR

36 GY28-6659

CCT
in CRJE PLM
cel' (Console Control Table)
in S/360 JOB PROCESSING 1130/2250
description of
format and contents of
CCTPWKA, contents of
in S/360 JOB PROCESSING 1130/2250
after processing by
IKAPBEGO
after processing by
IKAPDESO
after processing by
IKAPENTO
after processing by
IKAPLONO
after processing by
IKAPSPEO
after processing by
IKAPWRIO

36 GY27-7166

36 GY27-7166

in LOADER
31 GY28-6714
format of
in MVT SUPERVISOR
36 GY28-6659
CDE (contents directory entry)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
format of
use by IKJEGSYM (Table 18, request
type #4)
CDEEPADR field
in MVT SUPERVISOR

CCW
in ASSEMBLER (F)
21
in LINKAGE EDITOR (F)
31
CCW (channel command word)
ill INPUT/OUTPUT SUPERVISOR
30
data area layout
defined in glossary
for direct access device
for magnetic tape devices
for unit record devices
in data area directory
location of CCW in channel search
routine
in ONLINE TEST EXECUTIVE PROGRAM
37

GY26-3700
GY28-6667

36 GY28-6659

CDELIM
---rn-COBOL-TQ-PL/1 LCP
CDELIM, in History
in TSO CO~1AND PROC VOL6-SUBMIT

36 GY28-6776

CDENIC
---rn-MVT SUPERVISOR

36 GY28-6659

CDENTPT field
in MVT SUPERVISOR

36 GY28-6659

CDEPILOG subroutine
in MVT SUPERVISOR

36 GY28-6659

CDEPRGNM field
in MVT SUPERVISOR

36 GY28-6659

29 GY33-7007

GY28-6616

GY28-6651

CCW's, explanation of
in INDEXED SEQUEN. ACCESS METHOD

30 GY28-6618

CCWB
in ASSEMBLER (F)

21 GY26-3700

CCWs (channel command words)
----in GRAPHICS ACCESS METHOD
30 GY27-7113
CCWs (Channel Control Words)
in MACHINE-CHECK HANDLER, S360 M85 31 GY27-7184

CDEXIT routine
---rn-MVT SUPERVISOR
description of
entry point name(s) of
flowchart of
module name for
synopsis of
COHKEEP
in MVT SUPERVISOR

36 GY28-6659

36 GY28-6659

COL
CDABDEL routine
in MVT SUPERVISOR

36 GY28-6659

CDADVANS
in MVT SUPERVISOR

36 GY28-6659

CDALLOC subroutine
in MVT SUPERVISOR
CDATA, in History
in TSO COMMAND PROC VOL6-SUBMIT
CDATTR field
---rn-MVT SUPERVISOR
CDATTR2 field

in FORTRAN IV (E)
calculation of
definition of "
generation of literals for

25 GY28-6601

CDLLSRCH
in MVT SUPERVISOR

36 GY28-6659

CDMOPUP subroutine
in MVT SUPERVISOR

36 GY28-6659

CDQUECTL subroutine
in MVT SUPERVISOR

36 GY28-6659

CDRBP field
MVT SUPERVISOR

36 GY28-6659

36 GY28-6659
36 GY28-6776
36 GY28-6659

---rn

~

CDSEARCH - CFLAGS
CDSEARCH subroutine
in MVT SUPERVISOR
CDSETUP subroutine
in MVT SUPERVISOR

56
in COBOL-TO-PL/1 LCP
CENOMSG switch
in ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

CDTYPE, in History
---rn-TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

CDXLMJP field
in MVT SUPERVISOR

36 GY28-6659
30 GY27-7113
37 GY28-6651

37 GY28-6651

CECINP
---rn-ONLINE TEST EXECUTIVE PROGRAM
CECOM
in ONLINE TEST EXECUTIVE PROGRAM
CECOM Service module
in TCAM SERVICEABILITY AIDS
entry
functions

37 GY28-6651
37 GY28-6651
37 GY28-6651
30 GY30-2027

CECOMANS si wtch
in ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

CECOMOUT switch
in ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

CECOPT
in ONLINE TEST EXECUTIVE PROGRAM
CECTST
---rn-ONLINE TEST EXECUTIVE PROGRAM
Ceil ing- IEBCOPY
in UTILITIES
Ceiling quotient
in UTILITIES

CENOUT central command processor
--rilCRJE. PLM
entry point code
flowchart
microfiche directory
module description
register usage
CENOUT corr~and processor
in REMOTE JOB ENTRY
Central command interface
in CRJE PLM
Central command interface module
in CRJE PLM
flowchart
function
microfiche directory
module description
register usage
Central command processors
in CRJE PLM
Central command routines
in REMOTE JOB ENTRY
Central command scheduling routine
in REMOTE JOB ENTRY
Central command subtask routine
in REMOTE JOB ENTRY
Central items
in FORTRAN IV (G) COMPILER
DATA
definition
de sc ri pti on
SYMBOL
Central operator messages
in CRJE PLM

36 GY30-2011

36 GY30-2005
36 GY30-2011
36 GY30-2011

36 GY30-2011
36 GY30-2005
36 GY30-2005
36 GY30-2005
25 GY28-6638

36 GY30-2011

37 GY28-6651

CECBPTR, in MSGPARM
in TSO COMAND PROC VOL2-CNCL/STATUS36 GY28-6772
CECDEV
---rn-ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

36 GY28-6659

CDSEXIST switch
in ONLINE TEST EXECUTIVE PROGRAM

Cb (channel end)
in GRAPHICS ACCESS METHOD
CE communications
in ONLINE TEST EXECUTIVE PROGRAM
decoding of
dynamic
establishment of
first-error
initial
routine
testing-complete
test definition
CE switches
in ONLINE TEST EXECUTIVE PROGRAM
CESWT
CESWT1
CESWT2
CESWT3
CESWT4
CESWT5
CESWT6
CESWTR
CESWTR1
CESWTR2
CE volumes
in ONLINE TEST EXECUTIVE PROGRAM

29 GY33-7007

36 GY28-6659

37 GY28-6651
37 GY28-6651

CENXTR
--rilONLINE TEST EXECUTIVE PROGRAM
CESD
in LINKAGE EDITOR (F)
CESD entry
in LOADER
CESD entry number
in LINKAGE EDITOR (F)
CESD ID
in LINKAGE EDITOR (F)
CESD identifier
in LINKAGE EDITOR (F)
CESD record
in LINKAGE EDITOR (F)
format
in input load module
in TSO COMMAND PROCESSOR VOL7-TEST
format for load module
format for object module
use of
CESD record types
in LINKAGE EDITOR (F)

37 GY28-6651
31 GYL8-6667
31 GY28-6714
31 GY28-6667
31 GY28- 6667
31 GY28- 6667
31 GY28-6667
36 GY28-6777

31 GY28-6667

---rn

CEXEC. in History
TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

CFF-ROUT subroutine
---in COBOL (F)

24 GY28-6382

32 GY28-6614
32 GY28-6614

CFLAGS
---rn-TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
data area
in directory

57
CGEN-IEKWCN
---rn FORTRAN IV

COMPILER

25 GY28-6642

CGOTO
in ASSEMBLER (F)
CGOTO STA XLATE routine
in FORTRAN IV (G) COMPILER

21 GY26-3700

(H)

25 GY28-6638

Chain

---rn TSO

COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
of keywords
of parameter descriptor entries
(PDEs)
Chain, creation of
in COBOL-TO-PL/1 LCP
29 GY33-7007
Chain, DSE
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
Chain, second level message
in TSO COMMAND PROC VOL6-WHEN/END 36 GY28-6776
Chain address
in SORT/MERGE
33 GY28-6597
Chain-back address
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Chain field
in FORTRAN IV (E)
25 GY28-6601
in dictionary
in overflow table
Chain manipulation routine
in MVT JOB MANAGEMENT
36 GY28-6660
Chain of DDNAME PDES
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
chaining field in DDNPDE data area
processed by IKJEFD20
Chain of messages
in TSO COMMAND PROC VOL4-LISTBC
36 GY28-6774
building
MAIL
NOTICES
Chain pointers
in TSO COMMAND PROC VOL4-LISTBC
36 GY28-6774
Chain record
in CRJE PLM
36 GY30-2011
Chained channel-program scheduling
in SEQUENTIAL ACCESS METHODS
30 GY28-6604
appendages
abnormal end, channel end, PCI
end-of-extent
end-of-block routines
lOB prefix
joining
description of end-of-block
routines
end-of-block routine finds joining
unsuccessful
introduction to
Note/Point routines
parting
channel end appendage finds chaining
terminated
description of PCI appendage
introduction to
stage 2 Open executors
stage 3 open executor
Chained scheduling
in SEQUENTIAL ACCESS METHODS
30 GY28-6604
Chained scheduling channel
programs
in SEQUENTIAL ACCESS METHODS
30 GY28-6604
Chaining
in ASSEMBLER (F)
21 GY26-3700
forward
backward
usage
in CATALOG MANAGEMENT
30 GY28-6606
. of physical blocks
of volume control blocks

CGEN - CHANGB

in COBOL-TO-PL/1 LCP
29
in FORTRAN IV (E)
25
in dictionary
in overflow table
text buffers
in GRAPHIC SUBRTN. PACKAGE
25
in INDEXED SEQUEN. ACCESS METHOD
30
channel program
scan mode
in TSO CATALOG MANAGEMENT
36
of physical blocks
of volume control blocks
Chaining alternate track-ATLAS
in UTILITIES
32
Chaining create tables-IEBDG
in UTILITIES
32
Chaining FD address tables-IEBDG
in UTILITIES
32
Chaining free space queue elements
in TSO COMMAND PROC VOL1-SUBRTNS
36
Chaining of control blocks
in PL/I SUBROUTINE LIBRARY
29
Chaining of IOCS's
in PL/I SUBROUTINE LIBRARY
29
Chaining userid messages
in TSO COMMAND PROC VOL1-BROADCAST 36
Chaining userids
in TSO COMMAND PROCESSOR VOL1-LIST 36
CHAINPTR, in PDE
in TSO COMAND PROC VOL2-CNCL/STATUs36
Chains
---rn-INDEXED SEQUEN. ACCESS METHOD
30
in PL/I (F) COMPILER
29
ALLOCATE
AUTOMATIC
housekeeping
in structure processor
scan in pseudo-code phase
VDA region
block header

GY33-7007
GY28-6601

GY27-7152
GY28-6618
GY28-6745

GY28-6614
GY28-6614
GY28-6614
GY28-6771
GY28-6801
GY28-6801
GY28-6771
GY28-6771
GY28-6772
GY28-6618
GY28-6800

CALL

circular
COBOL, in preprocessor
constants
constructed by read-in
CONTROLLED
in structure processor
DECLARE statements
DEFINED scan
error
hash
picture
validity check
PROCEDURE-ENTRY BEGIN
STATIC
in structure processor
scan of external section
SUBS TABLE
symbol variables
type 1 entry
in TSO COMMAND PROCESSOR VOL1-ADD
local lateral
total lateral
in TSO COMMAND PROCESSOR VOL1-CHNG
Chains, storage, used by PARSE
in TSO COMMAND PROCESSOR VOL2-CALL
CHAIN3
---rn-COBOL (E)
Chamelon dummy argument
in PL/I (F) COMPILER
Chamelon temporaries
in PL/I (F) COMPILER

36 GY28-6771
36 GY28-6771
36 GY28-6772
24 GY24-5009
29 GY28-6800
29 GY28-6800

CHANGE
---rn-TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-6771

CHANGE - Channel

CHANGE
I in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
L--------------------------------------(continued)
levels
operation
parameter descriptor list
password/account number routine
procedure name routine
Change, priority
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
CHANGE command indicator
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771
Change control terminal routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
Change data (internal)
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Change Entry routine (IECTCHGN)
in BASIC TELECOMM. ACCESS METHOD
30 GY30-2001
logic flow
Change interval type routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
Change item
in UPDATE ANALYSIS PROGRAM
36 GY28-7106
Checks
Entry
IBM-originated
User-originated
Change Item Analysis (IHGANY)
in UPDATE ANALYSIS PROGRAM
36 GY28-7106
Change level
in UPDATE ANALYSIS PROGRAM
36 GY28-7106
Change PDS
in UPDATE ANALYSIS PROGRAM
36 GY28-7106
Change polling list routine
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
chart
Change queue
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
Change SSI
in UPDATE ANALYSIS PROGRAM
36 GY28-7106
CHANGE statement
in LINKAGE EDITOR (F)
31 GY28-6667
general description of processing
operation diagram
processor
CHANGE subcommand
in TSO COMMAND PROC VOL1-BROADCAST 36 GY28-6771
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
summary of operations
syntax
CHANGE subcommand processing
in TSO COMMAND PROCESSOR VOLl-ACCT 36 GY28-6771
basic operation
subcommand identification
termination of
charts
CHANGE subcommand processor
in CRJE PLM
36 GY30-2011
entry point code
flowchart
functional description
messages requested
microfiche directory
module description

58
register usage
Change table build (IHGCTB01)
in UPDATE ANALYSIS PROGRAM
Change table build routine
in UPDATE ANALYSIS PROGRAM
Change tables
in UPDATE ANALYSIS PROGRAM
Change terminal routine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
Change terminal table routine
in QUEUED TELECOMM. ACCESS METHOD
chart
Change Waiting Relational
in COBOL (E)
Changes the output class
in TSO COMMAND PROCESSOR VOL4-FREE
Change1 subtask
in QUEUED TELECOMM. ACCESS METHOD

36 GY28-7106
36 GY28-7106
36 GY28-7106
30 GY30-2029

30 GY30-2002
24 GY24-5009
36 GY28-6774
30 GY30-2002

Changing ACCOUNT userids
in TSO COMMAND PROC VOL1-BROADCAST 36 GY28-6771
Changing UADS
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
Channel
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
in INTRO. TO CONTROL PROGRAM LOGIC 36 GY28-6605
program
scheduling
in SORT/MERGE
33 GY28-6597
Channel, block multiplexer
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
Channel, 7094
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
command traps
invalid, specified by 7094 select
program emulation
register simulation
simulation of
Channel availability
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
alternate path retry, described in
module directory
alternate path table (diagram)
channel search routine, described in
module directory
for multiprocessing
test channel routine, described in
module directory
Channel Availability Table
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
Channel buffer
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
obtaining
releasing
Channel Buffer Command routine (IITCHB)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
Channel buffering
in 7074, EMULATE FOR M/165
GY27-7228
description
read operations
write operations
Channel check
in MACHINE-CHECK HANDLER, S'360 M65 31 GY27-7155
ha:ndling of
record
Channel Check Handler
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616

59
Channel Check Handler
L--------------------------------------(continued)
in MFT SUPERVISOR
36 GY27-7236
in MVT SUPERVISOR
36 GY28-6659
entry point name(s) of
module name(s) for
synopsis of
Channel-Check Handler.
interface
in MACHINE-CHECK HANDLER. M135/145 30 GY27-7237
Channel-Check Handler (CCH)
in MACHINE-CHECK HANDLER. M155/165 30 GY27-7198
Channel command codes
in BASIC TELECOMM. ACCESS METHOD
30 GY30-2001
Channel command word
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
Channel command word (CCW)
in BASIC TELECOMM. ACCESS METHOD
30 GY30-2001
in LINKAGE ~DITOR (F)
31 GY28-6667
in control record
in input module
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
format
Channel command words
in BASIC DIRECT ACCESS METHOD
30 GY28-6617
Channel commands
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
channel operation emulation
data channel traps
Channel configuration word
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
Channel end/abnormal end appendages
(IGG019MB. IGG019PD)
in BASIC TELECOMM. ACCESS METHOD
30 GY30-2001
completions. normal and abnormal
description
function
logic flow
Channel end appendage
in BASIC DIRECT ACCESS METHOD
30 GY28-6617
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
in S/360-1130 DATA TMN. - FORTRAN 25 GY27-7161
in TSO CONTROL PROGRAM
36 GY28-7199
Channel end appendage-IGG019V5
in IBM 1419/1275 DEVICE DEP. BSAM 30 GY21-0012
Channel end status
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
Channel error
in MVT SUPERVISOR
36 GY28-6659
recovery options for
Channel error analysis module
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
Channel error block table
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
in data area directory
in data area layout
Channel failure
in MACHINE-CHECK HANDLER. S360 M85 31 GY27-7184
Channel I/O environment
in MACHINE-CHECK HANDLER. S360 M85 31 GY27-7184
restoration of
saving of
Channel inboard record
in MACHINE-CHECK HANDLER. M135/145 30 GY27-7237
in MACHINE-CHECK HANDLER. M155/165 30 GY27-7198
in MACHINE-CHECK HANDLER. S360 M85 31 GY27-7184
Channel load assignments
in JOB MANAGEMENT
36 GY28-6613
Channel load table (CLT)
in JOB MANAGEMENT
36 GY28-6613
storage requirements of
in MVT JOB MANAGEMENT
36 GY28-6660
Channel path
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
alternate
primary

Channel Channel pointer table
in INITIAL PROGRAM LOADER AND NIP 36
Channel program
in MACHINE-CHECK HANDLER. S360 M85 31
Channel program block (CPB)
in TELECOMMUNICATION ACCESS METHOD 30
introduction
DSECT
Channel program descriptions and
formats
in INDEXED SEQUEN. ACCESS METHOD
30
CLOSECCW( 1)
CLOsEccw (2)
VXCCW(lA)
VXCCW(1B)
VXCCW(2)
5/5w
6/6w
7/7w
8 (fixed length records)
8 (variable length records)
9A
9B/9BW
9C/9CW
10A/l0AW
10B/l0BW
l1A
l1B/llBW
12A
12B
12C/12CW
12AV
12BV
13A
13B
13C/13CW
14/14w (fixed length records)
14/14w (variable length
records)
15
16
17/17w
18
19/91
20 (fixed length records)
20 (variable length records)
21
22A
22B
23
24
25
26
31A
31B
87
123w
123wv
Channel program example-ATLAS
in UTILITIES
32
Channel program for "PCI-reado-IEBCOPY
in UTILITIES
32
Channel program generation
in QUEUED TELECOMM. ACCESS METHOD 30
Channel program-IEBTCRIN
in UTILITIES
32
Channel program in IEHDASDR dump
in UTILITIES
32
Channel program modification-ATLAS
in UTILITIES
32
Channel program modification-IEBCOPY for
writing
in UTILITIES
32
Channel programs
in BASIC DIRECT ACCESS METHOD
30
ASI control of

Channe~

GY28-6661
GY27-7184
GY30-2029
..,;.
.:
GY28-6618

GY28-6614
GY28-6614
GY30-2002
GY28-6614
GY28-6614
GY28-6614
GY28-6614
GY28-6617

Chaanel - Channels
Channel programs
I in BASIC DIRECT ACCESS METHOD
30 GY28-6617
L--------------------------------------(continued)
ending address in lOB
termination of
updating a block
verifying a write
writing a new block
format programs
pre-format
self-format
in BASIC TELECOMM. ACCESS METHOD
30 GY30-2001
BSC
command code
control information for generating
count
flags
format in this manual
general information
model
start-stop
TP-Op codes
in CATALOG MANAGEMENT
30 GY28-6606
to format catalog
to read and write blocks
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
in Obtain routine
for processing VTOC
to read formats 4 and 5
for RPS devices
to write format 3
in GRAPHICS ACCESS METHOD
30 GY27-7113
in INDEXED SEQUEN. ACCESS METHOD
30 GY28-6618
BISAM
flow-of-control (non write KN)
flow-of-control (write KN)
functions
modules
load mode
flow-of-control
functions
modules
scan mode
functions
modules
queues
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
2301, 2302, 2303~ 2305, 2311, 2314,
2321, and 3330 error routines
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
for AT&T 83B3 selective calling station
for IBM 1030 lines
for IBM 1050 (nonswitched) lines
for IBM 1050 (switched) lines
for IBM 1060 lines
for IBM 2740 basic
for IBM 2740 with checking
for IBM 2740 with dial
for IBM 2740 with dial and checking
for IBM 2740 with dial and transmit
control
for IBM 2740 with dial., transmit
control, and checking
for IBM 2740 with station control
for IBM 2740 with station control and
checking
for IBM 2848/2260 remote
for TTY models 33/35 TWX
for Western Union plan 115A outstation
in SEQUENTIAL ACCESS METHODS
30 GY28-6604
BSAM/QSAM
chained scheduling
update
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
AT , T 83B3 selective calling
station lines

60
autopoll feature
BSC devices
IBM BSC multipoint
IBM 1030
IBM 1050
IBM 1060
IBM 2260 remote
IBM 2740
IBM 2741
IBM 7770
special
S/360 to S/360 dial
S/360 to 1130 dial
s/360 to 2770 dial
S/360 to 2780 dial
S/360 to S/360 point to point
s/360 to 1130 pOint to point
S/360 to 2770 point to point
S/360 to 2780 point to point
TTY models 33 and 35 TWX
Western Union plan
outstation
World Trade Telegraph
in TSO CATALOG MANAGEMENT
36 GY28-6745
to format catalog
to read and write blocks
in TSO CONTROL PROGRAM
36 GY28-7199
for dump data set
for swap operations
execution of
location of
scheduling of
Channel programs-ATLAS
in UTILITIES
32 GY28-6614
Channel programs for IEHDASDR
in UTILITIES
32 GY28-6614
Channel search routines
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
diagram
flowcharts of
for logical channel
use of channel table
Channel Status Table (CST)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
bit settings
description
finding the address of
format
relationship to Communication Region and
SUB
in 7074 EMULATE FOR M/165
GY27-7228
Channel status word (CSW)
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
in glossary
in operation diagram
Channel table
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
entry algorithm for direct access
devices
explana ti on of
Channel Transmission routine (IITILK)
in EMULATOR FOR 7090/1094/709411
35 GY27-7187
description
flowchart
interlock
read channel programs
write channel programs
Channel Unit Record routine (IITUR)
in EMULATOR FOR 7090/7094/109411
35 GY27-7187
description
flowchart
wri te channel programs
Channels
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
defined
logical channels

61
Channels
I in INPUT~OUTPUT SUPERVISOR
30 GY28-6616
L--------------------------------------(continued)
multiplexor channels
2870 multiplexor channel
physical channels
relationship to I/O activity
(diagram)
Channels, logical
in JOB MANAG~M~NT
36 GY28-6613
CHANTEST switch
in ONLINE TEST EXECUTIVE PROGRAM
CHANTRAP
in EMULATOR FOR 7090/7094/709411
format
use
CHAP
---rn MFT SUPERVISOR
entry point
flowchart
functional description
module description
module synopsis
CHAP (change priority) macro
in PL/I SUBROUTINE LIBRARY
CHAP macro instruction
in MVT JOB MANAGEMENT
initiator use of
in S/360 JOB PROCESSING 1130/2250
CHAP routine
in MVT SUPERVISOR
description of
entry point name(s) of
flowchart of
module name for
synopsis of
CHAR operand
in TSO COMMAND PROC VOL6-PROFILE
checking validity of
data area used for checking
description of
field in PDL for

37 GY28-6651
35 GY27-7187

36 GY27-7236

29 GY28-6801
36 GY28-6660
36 GY27-7166
36 GY28-6659

36 GY28-6776

CHARAC

~COBOL-TO-PL/1 LCP

29 GY33-7007

CHARACINNUMB
in COBOL-TO-PL/1 LCP

29 GY33-7007

CHARACT
in COBOL-TO-PL/1 LCP

29 GY33-7007

CHARACTER
in FORTRAN IV-TO-PL/1 LCP
CHARACTER (keyword attribute)
in PL/I SYNTAX CHECKER PLM
checking
in ENTRY statement
in PROCEDURE statement
subroutine BITCHAR (IKM136)
CHARACTER attribute
in FORTRAN IV-To-PL/1 LCP
Character-code option
in ALGOL-TO-PL/1 LCP
Character codes
in ALGOL (F) COMPILER
in TSO COMMAND PROCESSOR VOL7-TEST
conversion of
Character control fields
in SORT/MERGE
Char~cter conversion
in ONLINE TEST EXECUTIVE PROGRAM

29 GY33-7000
29 GY33-8009

29 GY33-7000
29 GY33-7006
26 GY33-8000
36 GY28-6777

Channels - CHARCHBK

in SEQUENTIAL ACCESS METHODS
30 GY28-6604
Character counter (CHARC)
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
Character delete control character
in TSO COMMAND PROC VOL6-PROFILE
36 GY28-6776
Character-deletion character
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
definition
user specification of
Character generator
in GRAPHIC SUBRTN. PACKAGE
25 .GY27-7152
Character representation
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
input text in EBCDIC
token string
Character scanning
in FORTRAN IV (G) COMPILER
25 GY28-6638
Character set independence
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
Character-set option
in ALGOL-TO-PL/1 LCP
29 GY33-7006
Character string
in ALGOL (F) COMPILER
26 GY33-8000
in Scan 1/11 Phase
in Scan III Phase
internal name
in TSO COMMAND PROC VOL6-PROTECT
36 GY28-6776
pointer to IKJPWPRM
in TSO COMMAND PROC VOL6-TERMINAL 36 GY28-6776
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
definition
Character string/arithmetic conversion
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Character string/bit string conversion
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Character string operator
in FORTRAN IV SYNTAX CHECKER PLM
25 GY28-6831
Character string/picture character string
conversion
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Character Stroke Subroutine
(GUPER)
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
Character translation
in PL/I (F) COMPILER
29 GY28-6800
Character types
in TSO TMP & SERVICE ROUTINES
36 GY28-6770
recognized by Coromand Scan service
routine
recognized by Parse service routine
Characteristic
in ALGOL (F) COMPILER
26 GY33-8000
Characteristics
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771
physical
operational
Characteristics of CHANGE subcommand
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
Characters
in GRAPHIC SUBRTN. PACKAGE
25 GY27-7152
in TCAM SERVICEABILITY AIDS
30 GY3O-2027
addressing
polling
Characters, valid PL/I
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
building:
identifiers, operators
scanning of
48-character set
60-character set

--rn

CHARC (character counter)
PL/I SYNTAX CHECKER PLM

29 GY33-8009

CHARCHEK routine
in TSO COMMAND PROC VOL6-PROFlLE

36 GY28-6776

33 GY28-6597
37 GY28-6651

IIIfIiI

IIIW!

CBARCBBK -

62

Charts

CHARCHEK routine
I in TSO COMMAND PROC VOL6-PROFILE
36 GY28-6776
L--------------------------------------(continued)
function of
input to
operation of
register usage by
CHARP (pointer to next character in record)
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
CHARPDE
in TSO COMMAND PROC VOL6-PROFILE

36 GY28-6776

CHARST
---rn-ASSEMBLER (F)

21 GY26-3700

Chart identifications
S/360-1130 DATA TMN. - FORTRAN
for System/360 data
conversion routines
for System/360 data
transmission routines
for 1130 data transmission
routines
Chart 001
in FORTRAN IV-TO-PL/l LCP
Chart 002
in FORTRAN IV-TO-PL/l LCP
Chart 003
in FORTRAN IV-TO-PL/l LCP
Chart 004
in FORTRAN IV-TO-PL/l LCP
Chart 005
in FORTRAN IV-TO-PL/l LCP
Chart 006
in FORTRAN IV-TO-PL/l LCP
Chart 007
in FORTRAN IV-TO-PL/l LCP
Chart 008
in FORTRAN IV-TO-PL/l LCP
Chart 009
in FORTRAN IV-TO-PL/l LCP
Chart 010
in FORTRAN IV-TO-PL/l LCP
Chart 011
in FORTRAN IV-TO-PL/l LCP
Chart 012
in FORTRAN IV-TO-PL/l LCP
Chart 013
in FORTRAN IV-TO-PL/l LCP
Chart 014
in FORTRAN IV-TO-PL/l LCP
Chart 015
in FORTRAN IV-TO-PL/l LCP
Chart 016
in FORTRAN IV-TO-PL/l LCP
Chart 017
in FORTRAN IV-TO-PL/l LCP
Chart 018
in FORTRAN IV-TO- PL/ 1 LCP
Chart 019
in FORTRAN IV-TO-PL/l LCP
Chart 020
in FORTRAN IV-TO-PL/l LCP
Chart 021
in FORTRAN IV-TO-PL/l LCP
Chart 022
in FORTRAN IV-TO-PL/l LCP
Chart 023
in FORTRAN IV-TO-PL/l LCP
Chart 024
in FORTRAN IV-TO-PL/l LOP
Chart 025
in FORTRAN IV-TO-PL/l LOP
Chart 026

---rn

25 GY27-7161

29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000

in FORTRAN IV-To-PL/l LCP
Chart 027
in FORTRAN IV-TO-PL/l LCP
Chart 028
in FORTRAN IV-TO-PL/l LCP
Chart 029
in FORTRAN IV-To-PL/l LCP
Chart 030
in FORTRAN IV-TO-PL/l LCP
Chart 031
in FORTRAN IV-TO-PL/l LCP
Chart 032
in FORTRAN IV-TO-PL/l LCP
Chart 033
in FORTRAN IV-TO-PL/l LCP
Chart 034
in FORTRAN IV-TO-PL/l LCP
Chart 035
in FORTRAN IV-TO-PL/l LCP
Chart 036
in FORTRAN IV-TO-PL/l LCP
Chart 037
in FORTRAN IV-TO-PL/l LCP
Chart 038
in FORTRAN IV-To-PL/l LCP
Chart 039
in FORTRAN IV-TO-PL/l LCP
Chart 040
in FORTRAN IV-TO-PL/l LCP
Chart 041
in FORTRAN IV-TO-PL/l LCP
Chart 042
in FORTRAN IV-TO-PL/l LCP
Chart 043
in FORTRAN IV-TO-PL/l LCP
Chart 044
in FORTRAN IV-TO-PL/l LCP
Chart 045
in FORTRAN IV-TO-PL/l LCP
Chart 046
in FORTRAN IV-TO-PL/l LCP
Chart 047
in FORTRAN IV-TO-PL/l LCP
Chart 048
in FORTRAN IV-TO-PL/l LCP
Chart 049
in FORTRAN IV-TO-PL/l LCP
Chart 050
in FORTRAN IV-TO-PL/l LCP
Chart 051
in FORTRAN IV-TO-PL/l LCP
Chart 052
in FORTRAN IV-TO-PL/l LCP
Chart 053
in FORTRAN IV-TO-PL/l LCP
Chart 054
in FORTRAN IV-TO-PL/l LCP
Chart 055
in FORTRAN IV-TO-PL/l LCP
Charts
---rn-ONLINE TEST EXECUTIVE PROGRAM
in REMOTE JOB ENTRY
in TSO COMMAND PROC VOL1-DELETE
in TSO COMMAND PROC VOL2-ALLOCATE
in TSO COMMAND PROC VOL2-DELETE
in TSO COMMAND PROC VOL4-LISTALC
in. TSO·COMMAND PROC VOL4-LISTBC
in TSO COMMAND PROC VOL5-LISTCAT
in TSO COMMAND PROC VOL5-LISTDS
in TSO COMMAND PROC VOL6-PROFILE
in TSO COMMAND PROC VOL6-PROTECT
in TSO COMMAND PROC VOL6-RENAME
in TSO COMMAND PROC VOL6-TERMINAL
control module hierarchy
flowcharts
in TSO COMMAND PROCESSOR VOLl-LIST

29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
29 GY33-7000
37
36
36
36
36
36
36
36
36
36
36
36
36

GY28-6651
GY30- 2005
GY28-6771
GY28-6772
GY28-6772
GY28-6774
GY28-6774
GY28-6775
GY28-6775
GY28-6776
GY28- 6776
GY28-6776
GY28-6776

36 GY28-6771

63
Charts
L--------------------------------------(continued)
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6114
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6116
Charts, list of
in TCAM SERVICEABILITY AIDS
30 GY30-2021
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6112
Charts, program organization
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6111
Charts (flowcharts)
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6114
CBAR48
in ALGOL-TO-PL/1 LCP
in PL/I SYNrAX CHECKER PLM
CHAR48 option
in PL/I (F) COMPILER

CHAR 6 0
in PL/I SYNrAX CHECKER PLM

29 GY33-1006
29 GY33-8009
29 GY28-6800
29 GY33-8009

CHASCT
in ONLINE TEST EXECUTIVE PROGRAM

31 GY28-6651

CHATR macro instruction
MVT SUPERVISOR

36 GY28-6659

---rn

CHBUF Command Processor (IIOCHBUF)
in 1014 EMULATE FOR M/165
function
MOD
'check bit' (EMCH)
in PL/I SUBROUTINE LIBRARY
Check, channel
MACHINE-CHECK HANDLER, M155/165
Check, parity
in MACHINE-CHECK HANDLER, M155/165
Check, syntax
in PL/I (F) COMPILER
CHECK (keyword option)
in PL/I SYNrAX CHECKER PLM
Check code for write-verify
in BASIC DIRECT ACCESS METHOD
Check I/O routine
in MVT SUPERVISOR
description of
entry point name of
flowchart of
module name for
CHECK lists, formal parameters
in PL/I (F) COMPILER
CHECK macro
in TSO COMMAND PROCESSOR VOL4-HELP
CHECK macro expansion linkage
.
in TELECOMMUNICATION ACCESS METHOD
CHECK macro-instruction
in FORTRAN IV (E)
compile-time use of
object-time use of
CHECK macro instruction, processing
for
in TSO CONTROL PROGRAM
CHECK macro instructions
in BASIC DIRECT ACCESS METHOD
Check module
in BASIC DIRECT ACCESS METHOD
CHECK module-IGG019V5
in IBM 1419/1215 DEVICE DEP. BSAM
CHECK op~ion
in PL/I SUBROUTINE LIBRARY
CHECK PDE
in TSO COMMAND PROCESSOR VOL6-RUN
Check point queue
in QUEUED TELECOMM. ACCESS METHOD

---rn

GY21-1228

29 GY28-6801
30 GY21-1198
30 GY21-1198
29 GY28-6800
29 GY33-8009
30 GY28-6611

Charts - Checkpoint
Check point request routine
in QUEUED TELECOMM. ACCESS METHOD
chart
Check request queue
in QUEUED TELECOMM. ACCESS METHOD
Check request subtasks
in QUEUED TELECOMM. ACCESS METHOD
Check routine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
Check routine--BISAM
in INDEXED SEQUEN. ACCESS METHOD
description
flow diagram
Check routines
in SEQUENTIAL ACCESS METHODS
description of
introduction to
Check summing
in MACHINE-CHECK HANDLER, S360 M85
Check syntax
in TSO COMMAND PROCESSOR VOL1-ADD
in TSO COMMAND PROCESSOR VOLl-CHNG
Check validi ty of command
in TSO COMMAND PROC VOL6-SUBMIT
Checker
in FORTRAN IV SYNTAX CHECKER PLM
flowcharts
function
interface with executive
part of IPDSN module
routines called by
CHECKER macro
in FORTRAN IV SYNTAX CHECKER PLM
format of
language level default
use of

30 GY30-2002
30 GY3O-2002
30 GY3O-2002
30 GY30-2029

30 GY28-6618

30 GY28-6604

31 GY21-1184
36 GY28-6111
36 GY28-6111
36 GY28-6116
25 GY28-6831

25 GY28-6831

CHECKFCN, label
in TSO COMMAND PROC VOL6-PROTECT

36 GY28-6116

CHECKFL
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

36 GY28-6659

29 GY28-6800
36 GY28-6114
30 GY30-2029
25 GY28-6601

36 GY28-1199

Checking
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
attributes (preliminary)
complete statements
return codes
function
incomplete statements
no more input allowed
return codes
keyword statements with data attributes
"keyword statement without data
attributes
subroutine
Checking of syntax
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6114

30 GY28-6611
30 GY28-6611
30 GY21-0012
29 GY28-6801
36 GY28-6116
30 GY30-2002

Checkmain routines
in MVT SUPERVISOR
description of
entry point name(s) of
flowcharts of
module name for
Checkpoint
in MFT SUPERVISOR
Check I/O

36 GY28-6659

36 GY21-1236

Ii

Checkpoint - Checkpoint
Checkpoint
I in MFT SUPERVISOR
36 GY27-7236
I
Check I/O
L--------------------------------------(continued)
entry point
module description
Checkmain
entry point
module description
Exit
entry point
module description
flowchart
functional description
Housekeeping
entry point
module description
Housekeeping
entry point
module description
Housekeeping
entry point
module description
Message
entry pOint
module description
Preserve
entry pqint
module description
Preserve
entry point
module description
Resume I/O
entry point
module description
in SORT/MERGE
33 GY28-6597
data set
modules
records
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Checkpoint close routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
Checkpoint continuation restart
routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
Checkpoint continuation restart
subroutine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
Checkpoint control blocks
in COBOL (F)
24 GY28-6382
Checkpoi-nt data areas
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
checkpoint disk records
checkpoint elements
checkpoint work areas
Checkpoint data set
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Checkpoint disk allocation routine

64

in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description,
register usage
Checkpoint disk end appendage
in TELECOMMUNICATIO~ ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
Checkpoint disk I/O queue
in TELECOMMUNICATION ACCESS METHOD
Checkpoint disk I/O routine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
Checkpoint disk initialization
routine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
Checkpoint entry
in MVT SUPERVISOR
Checkpoint executor
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
functions
library
microfiche directory
module description
register usage
Checkpoint Exit routine
in MVT SUPERVISOR
description of
entry point name of
flowchart of
module name for
Checkpoint header record
in MFT SUPERVISOR
Checkpoint Header Record (CHR)
in MVT SUPERVISOR
construction of
format of
Checkpoint Housekeeping routines
in MVT SUPERVISOR
description of
entry point names of
flowcharts of
module names for
Checkpoint message module
in MVT SUPERVISOR
description of
entry point name of
flowchart of
mod ule name for
Checkpoint no available core routine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description

30 GY30-2029

30 GY30-2029

30 GY30-2029
30 GY30-2029

30 GY3O-2029

36 GY28-6659
30 GY30-2029

36 GY28-6659

36 GY27-7236
36 GY28-6659

36 GY28-6659

36 GY28-6659

30 GY30-2029

Checkpoint - CHLEVL

65
Checkpoint no available core routine
I in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
L--------------------------------------(continued)
register usage
checkpoint no incident records
routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
Checkpoint notification and
disposition routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
checkpoint open routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
checkpoint QCB
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Checkpoint queue manager routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
Checkpoint record
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Checkpoint request routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
Checkpoint/Restart
in CONTROL PROGRAM WITH MFT
36 GY27-7128
internal queue
partition recovery routine
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
in INTRO. TO CONTROL PROGRAM LOGIC 36 GY28-6605
in JOB MANAGEMENT
36 GY28-6613
automatic
in restart preparation
recognizing
in MVT JOB MANAGEMENT
36 GY28-6660
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
in SORT/MERGE
33 GY28-6597
CHECKPOINT/RESTART
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Checkpoint/restart end-of-volume
exit
in SEQUENTIAL ACCESS METHODS
30 GY28-6604
Checkpoint/restart from environment
record routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description

register usage
Checkpoint/restart from incident and
CKREQ records routine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
Checkpoint/restart option
in TELLCOMMUNICATION ACCESS METHOD
Checkpoint routine
in QUEUED TELECOMM. ACCESS METHOD
charts
Checkpoint routines
in TELECOMMUNICATION ACCESS METHOD
Checkpoint save area
in COBOL (F)
CHECKPOINT subroutine
in COBOL (F)
Checkpoint subtask
in QUEUED TELECOMM. ACCESS METHOD

30 GY30-2029

30 GY30-2029
30 GY30-2002
30 GY30-2029
24 GY28-6382
24 GY28-6382
30 GY30-2002

CHECKPT macro expansion linkage
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
CHECKPT parameter list
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Checksum
in TEST RAN
37 GY28-6611
Checksum records
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
CHECKl (release extra storage subroutine)
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
CHF-ROUT subroutine
- i n COBOL (F)

24 GY28-6382

CHFORC
---ril"ASSEMBLER (F)

21 GY26-3700

CHGDCB
---ril"UPDATE ANALYSIS PROGRAM

36 GY28-7106

CHGNTRY macro instruction
in BASIC TELECOMM. ACCESS METHOD
CHGNTRY routine (IECTCHGN)
in BASIC TELECOMM. ACCESS METHOD
logic flow

30 GY30-2001
30 GY3o- 2001

CHKDSNM, in IKJEFF68
in TSO COMMAND PROC VOL5-0UTPUT

36 GY28-6775

CHKIPLDV
in INITIAL PROGRAM LOADER AND NIP

36 GY28-6661

CHKLHN routine
---ril"COBOL (F)

24 GY28-6382

CHKPT
---rn
INTRO. TO CONTROL
macro instruction

PROGRAM LOGIC 36 GY28-6605

routine
CHKSTS subroutine
---rn-CRJE PLM

36 GY30-2011

CHKSWH
---rn-ASSEMBLER (F)

21 GY26-3700

CHLEVL, field in CTRLTAB
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-6771

Ii1

66

CBMSG - CKRAR301

---rn

CRMSG, in routine directory
TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

~COBOL (F)

24 GY28-6382

CHNGP macro expansion linkage
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029

CKRACNDX table
in FORTRAN 'IV SYNTAX CHECKER PLM

25 GY28-6831

CHNGPDL
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
data area
in directory

CKRACTN routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart

CHNGT macro expansion linkage
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029

CKRALMER rotuine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart

25 GY28-6831

CKRAR100 routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart

25 GY28-6831

CHPDLPTR, field in CTRLTAB
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
CIB
in CRJE PLM
in TELECOMMUNICATION ACCESS METHOD
CIB (Command Input Buffer)
in S/360 JOB PROCESSING 1130/2250
in TCAM SERVICEABILITY AIDS
in TSO CONTROL PROGRAM
release of
use for
MODIFY command
START command
STOP command
ClOP, Compiler Input/Output Package
-----Yn COBOL (E)

36 GY30-2011
30 GY30-2029
36 GY27-7166
30 GY30-2027
36 GY28-7199

24 GY24-5009
36 GY28-6659

macro instruction
function of
routine
CIRCLE-IEKQCL
in FORTRAN IV (H) COMPILER
Circular chains
in PL/I (F) COMPILER
extended
initialized
CIRPARM
in TSO COMMAND PROC VOL6-RENAME
flowchart
format
M.O. diagram
use by IKJEHCIR
use by IKJEHREN
in TSO TMP & SERVICE ROUTINES
CIRPARM, data area
in TSO COMMAND PROC VOL2-DELh~E
description
CIRPARM (Catalog Information routine
parameter list)
in TSO COMMAND PROC VOL5-LISTCAT
CJOB, in History
in TSO COMMAND PROC VOL6-SUBMIT

CKRAR103 routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart
CKRAR104 routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart

25 GY28-6831

25 GY28-6831

25 GY28-6831

25 GY28-6831

25 GY28-6831

25 GY28-6642
29 GY28-6800

36 GY28-6776

36 GY28-6770
36 GY28-6772

CKRAR105 routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart
CKRAR106 routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart
CKRAR200 routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart
CKRAR201 routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart

25 GY28-6831

25 GY28-6831

25 GY28-6831

25 GY28-6831

36 GY28-6775
36 GY28-6776

CKFOUND, internal subroutine (label)
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
CKPCTR counter
---"InCOBOL (F)

24 GY28-6382

QSIT
in SORT/MERGE

33 GY28-6597

CKPTBL table
in COBOL (F)

CKRAR101 routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart
CKRAR102 routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart

CIRB

in MVT SUPERVISOR

CKPTSW switch

24 GY28-6382

CKRAR202 routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart
CKRAR300 routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart
CKRAR301 routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart

25 GY28-6831

25 GY28-6831

25 GY28-6831

67
CKRAR400 routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart
CKRAR500 routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart
CKRAR600 routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart
CKRAR601 routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart
CKRAR602 routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart
CKRAR603 routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart
CKRAR700 routine
in FORTRAN IV SYNTAX CHECKER PLM
des cript ion of
flowchart
CKRAR701 routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart
CKRAR800 routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart
CKRAR801 routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart

CKRAR400 - CKRLETrR
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029

25 GY28-6831
CKREVALU routine, flowchart
in FORTRAN IV SYNTAX CHECKER PLM

25 GY28-6831

25 GY28-6831

CKREXPON routine
in FORTRAN IV SYNTAX CHECKER PLM

25 GY28-6831

25 GY28-6831

CKRFAIL routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart

25 GY28-6831

25 GY28-6831

CKRGEMY routine, flowchart
in FORTRAN IV SYNTAX CHECKER PLM

25 GY28-6831

CKRGEMYA routine, flowchart
in FORTRAN IV SYNTAX CHECKER PLM

25 GY28-6831

CKRGEMY1 routine, flowchart
in FORTRAN IV SYNTAX CHECKER PLM

25 GY28-6831

CKRGENTS routine, flowchart
in FORTRAN IV SYNTAX CHECKER PLM

25 GY28-6831

25 GY28-6831

25 GY28-6831

25 GY28-6831

25 GY28- 6831

CKRGTANY subroutine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart
CKRGTNBS subroutine
in FORTRAN IV SYNTAX CHECKER PLM
called by checker
description of
flowchart
CKRGTNB1 subroutine
in FORTRAN IV SYNTAX CHECKER PLM
called by checker
description of
flowchart

25 GY28-6831

25 GY28-6831

25 GY28-6831

25 GY28-6831
CKRHOLLR routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart

25 GY28-6831

25 GY28-6831
CKRINTEG routine
in FORTRAN IV SYNTAX CHECKER PLM

25 GY28-6831

CKRBMPR routine, flowchart
in FORTRAN IV SYNTAX CHECKER PLM

25 GY28-6831

CKRINTLZ routine, flowchart
in FORTRAN IV SYNTAX CHECKER PLM

25 GY28-6831

CKRCKSIZ routine
in FORTRAN IV SYNTAX CHECKER PLM

25 GY28-6831

CKRINTRP routine, flowchart
in FORTRAN IV SYNTAX CHECKER PLM

25 GY28-6831

CKRCOMIT routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart

25 GY28-6831

CKRCSTRG routine
in FORTRAN IV SYNTAX CHECKER PLM

25 GY28-6831

CKRDECPT routine
in FORTRAN IV SYNTAX CHECKER PLM

25 GY28-6831

CKRDIGIT routine
in FORTRAN IV SYNTAX CHECKER PLM
CKREQ
in
CKREQ
in

25 GY28-6831

checkpoint request record
TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
checkpoint routines
TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
introduction
CKREQ macro expansion linkage

CKRITDEF routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart
CKRITIND routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart
CKRLBRCE routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart
CKRLETTR routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart

25 GY28-6831

25 GY28-6831

25 GY28-6831

25 GY28-6831

II[!

68

CKRLOFLO - Classname

CKRLOFLO routine, flowchart
in FORTRAN IV SYNTAX CHECKER PLM

25 GY28-6831

flowchart
function of
translate and text table for
WKASGRTB table

CKRLPARN routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart

25 GY28-6831

CKRMESSG routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart

25 GY28-6831

CKRSKANY subroutine
in FORTRAN IV SYNTAX CHECKER PLM
called by checker
description of
flowchart

25 GY28-6831

25 GY28-6831

CKRSTATM routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart

25 GY28-6831

25 GY28-6831

CKRSTCMT routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart

25 GY28-6831

25 GY28-6831

CKRSYNS routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart

25 GY28-6831

CKRSYUNS routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart

CKRNWOLD routine, flowchart
in FORTRAN IV SYNTAX CHECKER PLM

25 GY28-6831

CKRTABL routine
in FORTRAN IV SYNTAX CHECKER PLM
description
flowchart

CKROPNDX table
in FORTRAN IV SYNTAX CHECKER PLM

25 GY28-6831

CKROR routine
in FORTRAN IV SYNTAX CHECKER PLM

25 GY28-6831

CKRMNAME routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart
CKRNAME routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart
CKRNOTQT routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart
CKRNUMBR routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart

CKRQUOTE routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart
CKRRBRCE routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart

25 GY28-6831

25 GY28-6831

CKRRDORE routine
'in FORTRAN IV SYNTAX CHECKER PLM

25 GY28-6831

CKRREAL routine
in FORTRAN IV SYNTAX CHECKER PLM

25 GY28-6831

CKRRPARN rout ine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart

25 GY28-6831

CKRSCAN routine
in FORTRAN IV SYNTAX CHECKER PLM
description of
flowchart
CKRSCANF routine
in FORTRAN IV SYNTAX CHECKER PLM
descrition of
flowchart
CKRSERCH subroutine
in FORTRAN IV SYNTAX CHECKER PLM
called by checker

25 GY28-6831

25 GY28-6831

25 GY28-6831

CKRUNEST routine
in FORTRAN IV SYNTAX CHECKER PLM
flowchart

25 GY28-6831

25 GY28-6831

25 GY28-6831

25 GY28-6831

CLASIF-IEKQCF
in FORTRAN IV (H) COMPILER

25 GY28-6642

CLASNAME, in IKJPARMD (PDL)
in TSO COMMAND PROC VOL5-0UTPUT

36 GY28-6775

Class, in IKJPARMD (PDL)
TSO COMMAND PROC VOL5-0UTPUT
36
CLASS AND SIGN TEST and USE Macro
Generators
in COBOL (E)
24
CLASS parameter in GJOBCTL macro
instruction
in GRAPHIC JOB PROCESSOR SUPPORT
36
in S/360 JOB PROCESSING 1130/2250 36
Class PDE, in operation
in TSO COMMAND PROC VOL5-0UTPUT
36
Class tests
in COBOL (F)
24
Classification
in FORTRAN IV (H) COMPILER
25
code
tables
in PL/I SYNTAX CHECKER PLM
29
of attributes
of token string into assignment or
keyword statements
Classification scan
in FORTRAN IV (E)
25
of source statements
in FORTRAN IV-TO-PL/1 LCP
29
CLASSLST, in IKJPARMD (PDL)
36
in TSO COMMAND PROC VOL5-0UTPUT
Classname set-up Routine (IKASD081)
36
in GRAPHIC JOB PROCESSOR SUPPORT
chart

---rn

GY28-6775
GY24-5009
GY27-7159
GY27-7166
GY28-6775
GY28-6382
GY28-6642
GY33-8009

GY28-6601
GY33-7000
GY28-6775
GY27-7159

69
Classname set-up Routine (IKASD081)
I in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
L--------------------------------------(continued)
description
example of use in GFX functions
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
chart
description of
CLASSPDE (PDE for SYSOUT class)
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
format
Clause compatibility
in COBOL (F)
in CRJE PLM
Clean-up functions
in GRAPHIC JOB PROCESSOR SUPPORT
Cleanup,
in TSO COMMAND PROCESSOR VOL6-SEND
Cleanup phase
in PL/I (F) COMPILER
Cleanup routine
in QUEUED TELECOMM. ACCESS METHOD
in REMOTE JOB ENTRY
CLEANUPO, in routine directory
in TSO COMMAND PROCESSOR VOL1-ADD
Clear, entry point
in TSO COMMAND PROC VOL5-0PERATOR
Clear Channel
in MACHINE-CHECK HANDLER, S360 M65
theory
Clear Channel/MCH Terminator Module
(IGFASROA)
in MACHINE-CHECK HANDLER, S360 M65
Clear Channel Path/MCH Terminator
module
in MACHINE-CHECK HANDLER, S360 M85
CLEAR Command Processor (IIOC3CLR)
in 7074 EMULATE FOR M/165
function
MOD
CLEAR Command routine (IITCLR)
in EMULATOR FOR 7090/7094/709411
description
flowchart
CLEAR keyword parameter
in TSO COMMAND PROC VOL6-TERMINAL
Clearing input stacks
in TSO COMMAND PROCESSOR VOL1-ACCT
CLIST parameter
in COBOL (F)

24 GY28-6382
36 GY30-2011
36 GY27-7159
36 GY28-6776
29 GY28-6800
30 GY30-2002
36 GY30-2005
36 GY28-6771
36 GY28-6775
31 GY27-7155

31 GY27-7155
31 GY27-7184
GY27-7228

35 GY27-7187

36 GY28-6776
36 GY28-6771
24 GY28-6382

Clock, time-of-day
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
Clock, time-of-day (TOD)
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
Model 155
Model 165
Close

---rnupdating
UTILITIES
XCTL

32
tables of
Close, use of in 1130
in S/360-1130 DATA TMN. - FORTRAN 25
CLOSE (keyword statement)
in PL/I SYNTAX CHECKER PLM
29
checking
subroutine ISCLOSE (IKM22)
"Close communications line group routine
in QUEUED TELECOMM. ACCESS METHOD 30
chart

GY28-6614
GY27-7161
GY33-8009

GY30-2002

Classname - CLOSE
Close direct access message queue routine
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
chart
Close executor
in SEQUENTIAL ACCESS METHODS
30 GY28-6604
description of
introduction to
Close executor (IGG0203M)
in BASIC TELECOMM. ACCESS METHOD
30 GY3Q-2001
description
logic flow
Close executor-IGG0201D
in IBM 1419/1275 DEVICE DEP. BSAM 30 GY21-0012
CLOSE functions
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
EXPLICIT
IMPLICIT
CLOSE instruction
in COBOL (F)
24 GY28-6382
CLOSE macro
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
CLOSE macro expansion linkage
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
CLOSE macro instruction
in BASIC TELECOMM. ACCESS METHOD
30 GY30-2001
in FORTRAN IV (E)
25 GY28-6601
compile-time use of
object-time use of
in GRAPHICS ACCESS METHOD
30 GY27-7113
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28- 6772
CLOSE macro-instruction, type=T
in FORTRAN IV (E)
25 GY28-6601
compile-time use of
CLOSE macro instructions
in BASIC DIRECT ACCESS METHOD
30 GY28-6617
Close message control routine
in QUEUED TELECOMM. ACCESS METHOD 30 GY30- 2002
chart
Close module
in BASIC DIRECT ACCESS METHOD
30 GY28-6617
Close phase executors and modules
in INDEXED SEQUEN. ACCESS METHOD
30 GY28-6618
common
BISAM
errors during
flow-of-control
load mode
scan mode
close process
in PL/I SUBROUTINE LIBRARY
29" GY28-6801
explicit
implicit
Close process queue (input and output)
routine
in QUEUED TELECOMM. ACCESS METHOD 30 GY3Q-2002
chart
Close QSAM data sets
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Close routine
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
in INPUT/OUTPUT SUPPORT
30 GY28-6609
closing a data control
block
flowcharts
TYPE=T routine flowchart
in INTRO. TO CONTROL PROGRAM LOGIC 36 GY28-6605
Close routines
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
checkpoint close routine
line group close routines
CLOSE service routine
in TSO COMMAND PROC VOL4-LISTALC
36 GY28-6774
CLOSE statement, processing
in COBOL-TO-PL/l LCP
29 GY33-7007
CLOSE statements, parameter list

IIr.LI

~

70

CLOSE - CNO'l'BXNG

CLOSE statements, parameter list
L--------------------------------------(continued)
in PL/I (F) COMPILER
29 GY28-6800
CLOSE subroutine
in COBOL (F)
24 GY28-6382
CLOSE used
in TSO COMMAND PROC VOL2-DEL~~E
36 GY28-6772
Closedown
in CRJE PLM
36 GY30-2011
abnormal
normal
in QUEUED TELECO~M. ACCESS METHOD 30 GY30-2002
in REMOTE JOB ENTRY
36 GY30-2005
Closedown bit, TCAM
in TCAM SERVICEABILITY AIDS
30 GY30-2027
Closedown completion element QCB
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Closedown completion routines
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Closedown module
in CRJE PLM
36 GY30-2011
Closedown of an MCP
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Closedown processing routines
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Closedown terminal statistics
recording module
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiChe directory
module description
register usage
CLOSEMC macro expansion linkage
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
CLOSEPDS branch point
in TSO COMMAND PROC VOL6-RENAME
36 GY28-6776
Closing a data control
block
in INPUT/OUTPUT SUPPORT
basic initialization
Close routine
data control block
restoration
input label processing
output label processing
TCLOSE routine
volume disposition
Closing a data set
in IBM 1419/1275 DEVICE DEP. BSAM
Closing data sets
in MVT SUPERVISOR
for abnormally terminating tasks
for normally terminating tasks
Closing routine
in PL/I (F) COMPILER
CLSTXT - Phase F7 close text
in ASSEMBLER (F)
in JOB MANAGEMENT
in LINKAGE EDITOR (F)
CM record
in COBOL-TO-PL/1 LCP
CMAJOR
in FORTRAN IV (H) COMP ILER
CMAJOR-IEKJAZ
in FORTRAN IV (H) COMPILER

30 GY28-6609

in PL/I SYNTAX CHECKER PLM
attributes found mask
checking option conflicts for
GET statement
PUT statement
in attribute classification
CMDBUFAD
in TSO COMMAND PROCESSOR VOL1-ADD
in introduction
field in PARMLIST

29 GY33-8009

36 GY28-6771

CMDBUFFR. in data area directory
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

CMDBYTE2, field in CSOA
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

CMDCHK. field in CALLPARM
---rn-TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

CMDDATE. field in CMDBUFFR
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

CMDIND
---rn-TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771
field in ACCTPLST
checked by LIST
CMDNID, data area
---rn-TSO COMMAND PROC VOL1-DE.LETE

36 GY28-6771

CMDNxxx. field in CMDNID
in TSO COMMAND PROC VOL1-DhLETE

36 GY28-6771

CMDSCAN, field in work area
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

CMDTABLE
in TSO COMMAND PROC VOL5-0PERATOR
data area
in data area directory

36 GY28-6775

CMDX, in History
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

CMISC, in History
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

CMODEL subroutine of lKACTL
---rn-GRAPHIC JOB PROCESSOR SUPPORT

36 GY27-7159

30 GY21-0012
CMPRO

36 GY28-6659

---rn

FORTRAN IV-TO-PL/1 LCP

29 GY33-7000

CMSIZE-IEKGCZ
in FORTRAN IV (H) COMPILER

25 GY28-6642

CN record
-- in COBOL-TO-PL/1 LCP

29 GY33-7007

CNAME, in History
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

CNDP
---rn ALGOL-TO-PL/1 LCP

29 GY33-7006

29 GY33-7007

CNOP
---rn ASSEMBLER (F)

21 GY26-3700

25 GY28-6642

~ ASSEMBLER (F)

21 GY26-3700

CNOTHING
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

29 GY28-6800
21 GY26-3700
36 GY28-6613
31 GY28-6667

CNOPB

25 GY28-6642

71
CNSTCV- IEKKCN
in FORTRAN IV (H) COMPILER

CNS"lCV -

in FORTRAN IV SYNTAX CHECKER PLM

Codes

25 GY28-6831

25 GY28-6642

CNTNFLG, field in CFLAGS
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

CODCAR
---rn-ALGOL-TO-PL/1 LCP

29 GY33-7006

Code

CNTRL
for
in
CNTRL
in

~n MFT SUPERVISOR

macro instruction, processing

TSO CONTROL PROGRAM
routines
SEQUENTIAL ACCESS METHODS
card reader
magnetic tape
printer

CNTRLFLG, field in CALLPARM
in TSO COMMAND PROC VOL5-0PERATOR
CNTRLIN data set
in ONLINE TEST EXECUTIVE PROGRAM
in illustration
in operation diagram
opening of
CNTRLIND
in EMULATOR FOR 7090/7094/709411
format
use

36 GY28-7199
30 GY28-6604

36 GY28-6775
37 GY28-6651

35 GY27-7187

CNTRLPW field in IKJPWPRM
in TSO COMMAND PROC VOL6-PROTECT

36 GY28-6776

CNULL, in History
in TSO COMMAND PROC

36 GY28-6776

VOL6-SU~lIT

CNVC macro
---rn PL/I (F) COMPILER

29 GY28-6800

CNVRT

---rn GRAPHIC

SUBRTN. PACKAGE

25 GY27-7152

CNVx fields in E01DATDF
---rn TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
COBOL

---rn TSO

COMMAND PROCESSOR VOL6-RUN
data set type PDE in RUNPDL
COBOL--OS Interface at Compiler Time
in COBOL (E)
COBOL (ENVIRONMENT option)
in PL/I SYNTAX CHECKER PLM
COBOL chain, mapped in preprocessor
phase
in PL/I (F) COMPILER
COBOL Library Subroutines
in COBOL (F)
COBOL option, in ENVIRONMENT string
in PL/I (F) COMPILER
COBOL Verb Table
in COBOL-TO-PL/1 LCP
COBOL verbs
in COBOL (F)
Procedure IC-Text formats
COBOL word checking
in COBOL (F)
COBOL words
in COBOL (F)
Procedure IC-Text formats
in COBOL-TO-PL/1 LCP
COBOL words, Internal 1 Text
in COBOL-TO-PL/1 LCP
COCR
in INDEXED SEQUEN.. ACCESS METHOD
COD symbol

36 GY28-6776
24 GY24-5009
29 GY33-8009
29 GY28-6800
24 GY28-6382
29 GY28-6800
29 GY33-7007
24 GY28-6382
24 GY28-6382

36 GY27-7236

command authority
completion
routing
in PL/I (F) COMPILER
for prologues and epilogues
library call
compiler completion
dictionary
CODE
in ALGOL-TO-PL/1 LCP
CODE
in ALGOL-TO-PL/1 LCP
Code, DAIR entry
in TSO COMMAND PROC VOL5-LISTDS
Code, line translation
in TCAM SERVICEABILITY AIDS
CODE buffer
in TSO COMMAND PROC VOL6-PROFILE
Code byte
in PL/I (F) COMPILER
for TASK option
GOOB
GOTO
statement introduction
text string
CODE-CELL
in COBOL (F)
Code conversion
in EMULATOR FOR 7090/7094/709411
Code conversion routines
in SEQUENTIAL ACCESS METHODS
Code generation. phase 25
in FORTRAN IV (H) COMPILER
Code labels
in TSO COMMAND PROC VOL2-DELETE
on flowcharts
on MO diagrams
CODE macro expansion linkage
in TELECOMMUNICATION ACCESS METHOD
CODE parameter list
in TELECOMMUNICATION ACCESS METHOD
Code procedure
in ALGOL (F) COMPILER
Code producing instructions
in FORTRAN IV (G) COMPILER
CODE roll
in FORTRAN IV (G) COMPILER
description
in Exit
in Gen
location
Code tables
in ALGOL (F) COMPILER
Coded arithmetic data
---rn
PL/I SUBROUTINE

item (CAD)
LIBRARY

29 GY28- 6800

29 GY33-7006
2~

GY33-7006

36 GY28-6775
30 GY30-2027
36 GY28-6776
29 GY28-6800

24 GY28-6382
35 GY27-7187
30 GY28-6604
25 GY28-6642
36 GY28-6772

30 GY30-2029
30 GY30-2029
26 GY33-8000
25 GY28-6638
25 GY28-6638

26 GY33-8000
29 GY28-6801

CODEFLG, in History
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

Codes
---rn
GRAPHICS ACCESS

30 GY27-7113

24 GY28-6382
29 GY33-7007
29 GY33-7007
30 GY28-6618

METHOD
error
return
in INDEXED SEQUEN. ACCESS METHOD
appendage
asynchronous
exception (error)
in SORT/MERGE

30 GY28-6618

33 GY28-6597

Ii

Codes - COMLEV2K

72

Codes
I in SORT/MERGE
33 GY28-6597
l--------------------------------------(continued)
completion
format
in TSO COMMAND PROC VOL6-PROFILE
36 GY28-6776
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
entry (X' 24' to DAIR)
return
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
return codes to Mainline from subcommand
processors
other return codes
Codes, error correction
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
Codes, machine-check
interruption
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
in MACHINE-CHECK HANDLER, Ml55/165 30 GY27-7198
Model 155
Model 165
Codes, return
36 GY28-6776
in TSO COMMAND PROC VOL6-PROTECT

in GRAPHIC SUBRTN. PACKAGE
in GRAPHICS ACCESS METHOD
in PL/I SYNTAX CHECKER PLM

25 GY27-7152
30 GY27-7113
29 GY33- 8009

COMB
---rn ASSEMBLER (F)

21 GY26-3700

Combining object modules
in LINKAGE EDITOR (F)

31 GY28-6667

COMBLDL
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
COMBUF, field in common
---rn-TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

COMBUFR, field in common
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

COMCHASG
in MACHINE-CHECK HANDLER, s360 M65 31 GY27-7155
COMCNSL
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155

---rn

CODE5 switch
ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

COMCPPL, field in COMMON
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776

Coding conventions
in PL/I SUBROUTINE LIBRARY
Coding difficulties
in PL/I SYNTAX CHECKER PLM

29 GY28-6801

COMCVT
---rn-MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155

29 GY33-8009

COl
in CRJE PLM

collation
in SORT/MERGE
Collection subroutines
in FORTRAN IV (H) COMPILER
Collector/emitter
in REMOTE JOB ENTRY
Colon
in PL/I SYNTAX CHECKER PLM
as prefix delimiter
': (60-character set)
COLUMN
-----rnFORTRAN IV-TO-PL/l LCP
Column binary format
in EMULATOR FOR 7090/7094/709411
definition
reading of cards with
translation to row binary format
Column to Row Binary Rotation routine
CIITURCR)
in EMULATOR FOR 7090/7094/709411
Column Vector
in ALGOL (F) COMPILER
COL1SW
---rn-COBOL-TO-PL/l LCP
in ASSEMBLER (F)
COMAREA
in ALGOL-TO-PL/l LCP

36 GY28-6771

COMECBPT, in Control
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

36 GY30-2011

Cold start
---rn TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Colds tart routine
in REMOTE JOB ENTRY

COMECBAD, field in PARMLIST
in TSO COMMAND PROCESSOR VOL1-ADD

COMENVCK
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
36 GY30-2005
COMER lOB
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
33 GY28-6597
COMERXNT
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
25 GY28-6642
COMEXADR
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
36 GY30-2005
COMFL

29 GY33-8009

29 GY33-7000,

---rn

PL/I SYNTAX CHECKER PLM
29 GY33-8009
LASTENT (last entry)
MOREIN (more input in buffers>
OLSTATM (message buf~er cleared>
SECNDENT (second entry>

COMFLAGS
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

COMFLAGl
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

COMFLAG2
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

26 GY33-8000

COMI, field in common
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

29 GY33-7007

COMIOQ
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155

21 GY26-3700

COMLEY
-----rnMACHINE-CHECK HANDLER, S360 M65 31 GY27-7155

29 GY33-7006

COMLEV2K
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155

35 GY27-7187

35 GY27-7187

73
COMLOOP switch
in ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

COlllma
in ALGOL-To-PL/1 LCP
29 GY33-7006
Comma (.)
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
as delimiter between statement elements
COMMAD field
---rn-COBOL (F)
Command
in TSO COMMAND PROC VOL4-LISTBC
buffer
name
processor hierarchy
in TSO COMMAND PROC VOL5-0PERATOR
buffer
buffer. length
buffer. pOinter to
scan output
scan output area
scheduling routine
table
validity check
in TSO COMMAND PROC VOL6-WHEN/END
buffer
next
procedure
string
in TSO COMMAND PROCESSOR VOL1-CHNG
processor
string
in TSO COMMAND PROCESSOR VOL3-EDIT
definition
in TSO COMMAND PROCESSOR VOL4-EXEC
Command. MODE
in MACHINE-CHECK HANDLER. M155/165
Model 155
Model 165
Command. RESERVE
in INITIAL PROGRAM LOADER AND NIP
Command, SUBMIT
in TSO COMMAND PROC VOL6-SUBMIT
format
functional summary
syntax
validity
Command (or subcommand) name
in TSO COMMAND PROCESSOR VOL4-HELP
Command analyzer module
in CRJE PLM
entry point code
flowchart
messages requested
microfiche directory
module description
register usage
Command buffer
in TSO COMMAND PROC VOL1-DELETE
action area
contents
length
offset
parsing of
pointers to
validity checking of
in TSO COMMAND PROC VOL2-DELETE
description
operation
pointer to
in TSO COMMAND PROC VOL4-LISTALC
contents
usage
in TSO COMMAND PROC- VOL5-LISTCAT

24 GY28-6382
36 GY28-6774

36 GY28-6775

36 GY28-6776

36 GY28-6771
36 GY28-6773
36 GY28-6774
30 GY27-7198

36 GY28-6661
36 GY28-6776

36 GY28-6774
36 GY30-2011

36 GY28-6771

36 GY28-6772

36 GY28-6774
36 GY28-6775

CmILOOP -

description of
in TSO COMMAND PROC VOL5-LISTDS
36
format
in data area directory
in TSO COMMAND PROC VOL6-PROFILE
36
containing operands
pointer to
syntax checking of operands in
testing for operands in
in TSO COMMAND PROC VOL6-PROTECT
36
pointer to in DAPB18
pointer to in PPL
in TSO COMMAND PROC VOL6-RENAME
36
flowchart
format
M. o. diagram
in TSO COMMAND PROC VOL6-TERMINAL 36
in method of operation diagram
pointer to in CPPL
pointer to in PPL
in TSO COMMAND PROCESSOR VOL1-ADD 36
data area
in directory
pointer to
in TSO COMMAND PROCESSOR VOL1-CHNG 36
data area
in directory
parsed
pointer to
with CHNGPDL
in TSO COMMAND PROCESSOR VOL1-LIST 36
in TSO COMMAND PROCESSOR VOL2-CALL 36
in TSO COMMAND PROCESSOR VOL4-EXEC 36
in TSO COMMAND PROCESSOR VOL4-FREE 36
address of
in TSO COMMAND PROCESSOR VOL6-SEND 36
description
operation
in TSO COMMAND PROCESSOR VOL6-TIME 36
contents of
in TSO TMP & SERVICE ROUTINES
36
format
use by Command Scan service routine
use by Parse service routine
use by PUTGET service routine
use by Terminal Monitor Program
Command buffer. address
in TSO COMMAND PROCESSOR VOL4-HELP 36
of mother task
passed in PPL
Command buffer. COMMDBUF
in TSO COMMAND PROCESSOR VOL6-RUN 36
format of
address of
in flowchart
in method of operation diagram
Command buffer. pointer to
in TSO COMMAND PROCESSOR VOL2-CALL 36
Command buffer contents
in TSO COMMAND PROC VOL2-ALLOCATE 36
Command chaining access method routine
in MVT JOB MANAGEMENT
36
Command codes
in BASIC TELECOMM. ACCESS METHOD
30
Command Decode routine (IITTRM)
in EMULATOR FOR 7090/7094/709411
35
description
flowchart
Command default table
in CRJE PLM
36
Command exit
in CRJE PLM
36
Command format
in TSO COMMAND PROCESSOR VOL6-SEND 36
Command functions
in TSO COMMAND PROC VOL5-LISTCAT
36

COllllllaad

GY28-6775
GY28-6776

GY28-6776
GY28-6776

GY28-6776

GY28-6771

GY28-6771

GY28-6771
GY28-6772
GY28-6774
GY28-6774
GY28-6776
GY28-6776
GY28-6770

GY28-6774

GY28-6776

GY28-6772
GY28-6772
GY28-6660
GY3Q-2001
GY27-7187

GY30-2011
GY30-2011
GY28-6776
GY28-6775

111;.
ill!

COMMAND - Command
COMMAND IGNORED message
36 GY28-6776
in TSO COMMAND PROC VOL6-PROFILE
in message list
when issued
Command input buffer
36 GY30-2011
in CRJE PLM
36 GY28-7199
in TSO CONTROL PROGRAM
Command Input Buffer (CIB)
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
36 GY28-6660
in MVT JOB MANAGEMENT
chaining
format of
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
in TCAM SERVICEABILITY AIDS
30 GY30-2027
Command interpreter
36 GY30-2005
in REMOTE JOB ENTRY
Command invoker service routine
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
Command language
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
definition
Command library
in TSO TMP & SERVICE ROUTINES
36 GY28-6770
Command list
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
address of in INSRCDES
length of, in INSRCDES
building, method of operation diagram
Command mode
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
in TSO TMP & SERVICE ROUTINES
36 GY28-6770
in PUTGET service routine
Command name
in TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6775
invalid indicator
pointer to
question mark
verified
in TSO COMMAND PROC VOL6-WHEN/END 36 GY28-6776
END
primary
secondary
WHEN
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
length
location of
Command name, in ECT
in TSO COMMAND PROC VOL1-DELETE
36 GY28-6771
Command operands
in TSO COMMAND PROC VOL5-LISTCAT
36 GY28-6775
Command parsing
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771
Command-pending switch
in JOB MANAGEMENT
36 GY28-6613
Command pointer
in JOB MANAGEMENT
36 GY28-6613
Command procedure
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
library
member of library
statement
Command processing
in CONTROL PROGRAM WITH MFT
36 GY27-7128
master scheduler resident command
processor
DEFINE command processor
queue alter routine
SVC 34
system task control
36 GY27-7159
in GRAPHIC JOB PROCESSOR SUPPORT
VARY command
MODIFY command
STOP command
in s/360 JOB PROCESSING 1130/2250 36 GY27-7166
START GFX command

74
START GJPnnn corrmand
START SGJPnnn command
STOP GFX command
STOP GJPnnn command
STOP SGJPnnn command
VARY OFFGFX command
VARY ONGFX command
in TSO COMMAND PROC VOL6-WHEN/END 36
in TSO COMMAND PROCESSOR VOL4-EXEC 36
interface
method of operation diagrams
summary
Command processing, TIME
in TSO COMMAND PROCESSOR VOL6-TIME 36
flowchart
program organization
summary
Command Processing Routine (IKASD083)
in GRAPHIC JOB PROCESSOR SUPPORT
36
chart
description of
example of use in GFX functions
in S/360 JOB PROCESSING 1130/2250 36
chart
description of
Command processing routines
in REMOTE JOB ENTRY
36
Command processing summary
in TSO COMMAND PROCESSOR VOL6-RUN 36
Command processor
in TSO COMMAND PROC VOL5-0PERATOR 36
event control block (~CB)
ECB, pointer to
parameter list (CPPL)
in TSO COMMAND PROC VOL6-WHEN/END 36
overview
preview
routines
in TSO COMMAND PROCESSOR VOL2-CALL 36
in TSO COMMAND PROCESSOR VOL4-HELP 36
currently active
restrictions for using HELP
Comrr,and processor, TSO
in TSO COMMAND PROC VOL4-LISTBC
36
Command processor (CP)
in TSO COMMAND PROCESSOR VOL3-EDIT 36
definition
Command processor parameter list
in TSO COMMAND PROC VOL2-ALLOCATE 36
description
operation
control blocks
in TSO COMMAND PROCESSOR VOL1-ACCT 36
in TSO COMMAND PROCESSOR VOL1-CHNG 36
in TSO COMMAND PROCESSOR VOL2-CALL 36
Command processor parameter list (CPPL)
in TSO COMMAND PROC VOL2-DELETE
36
description
in operation
in TSO COMMAND PROC VOL4-LISTALC
36
format
usage
36
in TSO COMMAND PROC VOL4-LISTBC
36
in TSO COMMAND PROC VOL5-LISTCAT
description of
36
in TSO COMMAND PROC VOL5-LISTDS
format
in data area directory
pointer to
36
in TSO COMMAND PROC VOL6-PROFILE
description of
pointer to
use of
36
in TSO COMMAND PROC VOL6-PROTECT
description
in data area directory

GY28-6776
GY28-6774

GY28-6776

GY27-7159

GY27-7166

GY30-2005
GY28-6776
GY28-6775

GY28-6776

GY2B-6772
GY2B-6774

GY28-6774
GY2B-6773
GY28-6772

GY28-6771
GY2B-6771
GY28-6772
GY28-6772
GY28-6774
GY28-6774
GY28-6775
GY2B-6775

GY28-6776

GY28-6776

75
Command processor parameter list (CPPL)
L--------------------------------------(continued)
in TSO COMMAND PROC VOL6-RENAME
36 GY28-6776
flowchart
format
M.O. diagram
use by IKJEHREN
in TSO COMMAND PROC VOL6-TERMINAL 36 GY28-6776
format of
in data area directory
in method of operation diagram
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
format
use of
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
illustrated as input
passed from the TMP
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
format of
in data area directory
in method of operation diagram
in TSO TMP t SERVICE ROUTINES
36 GY28-6770
format
use
Command processor parameter LIST (CPPL)
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
Command processors
in TSO TMP t SERVICE ROUTINES
36 GY28-6770
list of
functions of
termination of
ways they receive control
:ommand Processors, level of
control
in TSO CONTROL PROGRAM
36 GY28-7199
'ommand reject, equipment check, SIOCC1,
SNO error routine
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
chart
ommand routine
in JOB MANAGEMENT
36 GY28-6613
ommand scan
in TSO COMMAND PROC VOL1-BROADCAST 36 GY28-6771
definition
36 GY28-6771
in TSO COMMAND PROC VOL1-DELETE
description
resultant
in TSO COMMAND PROC VOL1-SUBRTNS
36 GY28-6771
definition
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
definition
in TSO COMMAND PROC VOL4-LISTALC
36 GY28-6774
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
definition
in TSO COMMAND PROC VOL6-PROFILE
36 GY28-6776
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771
definition
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
definition
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
definition
EDIT program's use of
function
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
output area
parameter block
parameter list
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
definition
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
definition
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
definition
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776

COmmand - Command
Command SCAN
in TSO COMMAND PROCESSOR VOLl-CHNG 36
Command scan definition
in TSO COMMAND PROC VOL6-RENAME
36
Command Scan Output Area (CSOA)
in TSO TMP t S~VICE ROUTINES
36
format
use
Command scan parameter list
in TSO COMMAND PROCESSOR VOL1-ACCT 36
Command Scan Parameter List (CSPL)
in TSO TMP t SERVICE ROUTINES
36
format
use by COmmand Scan service routine
use by Default service routine
use by Terminal Monitor Program
Command Scan routine (IKJSCAN)
in TSO CONTROL PROGRAM
36
Command scan service
in TSO COMMAND PROCESSOR VOL1-ACCT 36
Command Scan service routine
in TSO COMMAND PROC VOL6-PROTECT
36
definition
in TSO COMMAND PROC VOL6-T~RMlNAL 36
definition
in TSO COMMAND PROCESSOR VOLl-LIST 36
definition
in TSO COMMAND PROCESSOR VOL4-EXEC 36
considerations
description
in TSO TMP t SERVICE ROUTINES
36
description
hierarchy
operation
parameters
register usage
return codes
Command Scan Workspace (CSWORK)
in TSO TMP t SERVICE ROUTINES
36
format
use
Command scheduling control block
in CRJE PLM
36
Command scheduling control block (CSCB)
in CONTROL PROGRAM WITH MFT
36
chain
creation of
queue manager
SVC 34
format and description of
in JOB MANAGEMENT
36
in MFT SUPERVISOR
36
in MVT JOB MANAGEMENT
36
command storage in
command-issuing authority
creation of
deletion of
format and description of
in S/360 JOB PROCESSING 1130/2250 36
definition of
testing ECB in
Command scheduling control blocks
in TSO COMANO PROC VOL2-CNCL/STATUs36
in IKJEFF51
in introduction
Command scheduling routine
in MVT JOB MANAGEMENT
36
Command Selection Routine (IKAPCSRO)
in GRAPHIC JOB PROCESSOR SUPPORT
36
chart
description of
example of use in defining a job
extract record
Command Selection Table
in GRAPHIC JOB PROCESSOR SUPPORT
36
example of use in defining a job

GY28-6771
GY28-6776
GY28-6770
...
GY28-6771
GY28-6770

GY28-7199
GY28-6771
GY28-6776
GY28-6776
GY28-6771
GY28-6774
GY28-6770

GY28-6770

GY3G-2011
GY27-7128

GY28-6613
GY27-7236
GY28-6660

GY27-7166

GY28-6772

GY28-6660
GY27-7159

GY27-7159

~

COIIIIIaIld -

76

Common

Command Selection Table
I in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7l59
L--------------------------------------(continued)
format of
Command statement processing-IEBGENER
in UTILITIES
32 GY28-66l4
Command string
in TSO COMMAND PROC VOL1-DELETE
36 G128-6771
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
scanning
syntax check of
Command string input
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
Command syntax
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
in TSO COMMAND PROC VOL6-RENAME
36 GY28-6776
operands
ALIAS
positional
Command translator routine
in MVT JOB MANAGEMENT
36 GY28-6660
Command user
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
ACCOUNT
OPERATOR
SUBMIT
Commands
in GRAPHICS ACCESS METHOD
30 GY27-7ll3
input/output and control
2250
2260
2280/82
in JOB MANAGEMENT
36 GY28-6613
CANCEL
DISPLAY
initialization
MOUNT
processing of
REPLY
REQ
SET
START (blank)
START RDR
START WTR
STOP
STOP WTR
UNLOAD
VARY
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
Commands, channel
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
emulation
traps
Commands, operator
in EMULATOR FOR 7090/7094/709411
35 GY27-7l87
corresponding execution routine
diagnostic use
execution
Commands, sequence of TSO
in TSO COMMAND PROC VOL6-WHEN/END 36 GY28-6776
Commands* terminal
in CRJE PLM
36 GY30-20l1
COMMDBUF, the command buffer
in TSO COMMAND PROCESSOR VOL6-RUN
address of
format of
in flowchart
in method of operation diagram

36 GY28-6776

COMMECB., field in WORKAREA
in TSO COMMAND PROCESSOR VOL6-RUN

36 GY28-6776

Comment
in ALGOL (F) COMPILER
in TESTRAN

26 GY33-8000
37 GY28-66ll

COMMENI'
in ALGOL-TO-PL/l LCP
COMMENI', in history
in TSO COMMAND PROC VOL6-SUBMIT
Comment record
in COBOL-TO-PL/l LCP
Comments
in ALGOL-To-PL/l LCP
Comments, removed from input text
in PL/I (F) COMPILER
Comments card image
in FORTRAN IV (E)
scanning of
Comments cards
in FORTRAN IV-To-PL/l LCP
Comments statement
in PL/I SYNTAX CHECKER PLM
Commit operator
in FORTRAN IV SYNTAX CHECKER PLM
definition of
description of
effect on error messages
effect on nesting
example of use
Common
---rIlFORTRAN IV (H) COMPILE.R
areas table
block
name
size
chain
displacement field
entries
expression elimination
example of
table
COMMON
in COBOL (F)
definition
in FORTRAN IV-TO-PL/l LCP
in TSO COMMAND PROC VOL5-0PERATOR
data area
in data area directory
in TSO COMMAND PROCESSOR VOL1-ADD
data area
in directory
COMMON, control block
in TSO COMMAND PROCESSOR VOL4-HELP
data area
illustrated as input
Common (CM)
in LINKAGE EDITOR (F)
definition
deUnking of
non-resolution processing
resolution processing
Common (CM) area
in LOADER
address assignment of
definition of
processing a CM entry
COMMON ALLOCATION AND OUTPUT routine
in FORTRAN IV (G) COMPILER
COMMON ALLOCATION roll
in FORTRAN IV (G) COMPILER
Common Area
in ALGOL (F) COMPILER
in MACHINE-CHECK HANDLER, M135/145
in ONLINE TEST EXECUTIVE PROGRAM
description of
illustration of
pointer to
residence of

29 GY33-7006
36 GY28-677~
29 GY33-7007
29 GY33-7006
29 GY28-6800
25 GY28-660l
29 GY33-7000
29 GY33-8009

25 GY28-6831

25 GY28-6642

24 GY28-6382
29 GY33-7000
36 GY28-6775
36 GY28-6771

36 GY28-6774

31 GY28-6667

31 GY28-67l4

25 GY28-6638
25 GY28-6638
26 GY33- 8000
30 GY27-7237
37 GY28-6651

Common - Communication

77

Common Area, Compiler
in COBOL (E)
24 GY24-5009
Common Area, main storage requirements for
in MACHINE-ChECK HANDLER, M155/165 30 GY27-7198
Common Area (MCH)
in MACHINE-CHECK HANDLER, s360 M65 31 GY27-7155
organization of
definition of
Common Area of MCH/85
in MACHINE-CHECK HANDLER, S360 M85 31 GY27-7184
description of
function of
sections of
Dependent
Independent
Subsystem Data Area
COMMON AREA roll
in FORTRAN IV (G) COMPILER
25 GY28-6638
COMMON block
in FORTRAN IV-TO-PL/1 LCP
29 GY33-7000
Common close
in INDEXED SEQUEN. ACCESS METHOD
30 GY28-6618
channel programs used
flow diagram
module
Common Communication area-IEBCOPY
in UTILITIES
32 GY28-6614
Common Communication area references-IEBDG
in UTILITIES
32 GY28-6614
Common DAIR failure message routine
(IKJEFF18)
in TSO COMMAND PROC VOL6-SUBMIT
36 GY28-6776
COMMON data
in FORTRAN IV (G) COMPILER
25 GY28-6638
Common Data Area
in ALGOL (F) COMPILER
26 GY33-8000
COMMON data area
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
description
in operation
COMMON DATA roll
in FORTRAN IV (G) COMPILER
25 GY28-6638
Common data space
in PL/I (F) COMPILER
29 GY28-6800
COMMON DATA TEMP roll
in FORTRAN IV (G) COMPILER
25 GY28-6638
Common errors
in IBM 1419/1275 DEVICE DEP. BSAM 30 GY21-0012
Common header area
in TSO COMMAND PROC VOL1-DELETE
36 GY28-6771
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771
COMMON intermediate text
in FORTRAN IV (E)
25 GY28-6601
creation of
deletion of
format of
COMMON NAME roll
in FORTRAN IV (G) COMPILER
25 GY28-6638
COMMON NAME TEMP roll
in FORTRAN IV (G) COMPILER
25 GY28-6638
Common open
in INDEXED SEQUEN. ACCESS METHOD
30 GY28-6618
channel programs used
modules
Common path routine (IEWLCPTH)
in LINKAGE EDITOR (F)
31 GY28-6667
and automatic promotion of common
in program organization
Common pointers. field for
in TSO COMMAND PROC VOLI-DELETE
36 GY28-6771
Common reference
in LOADER
31 GY28-6714
COll)Inon routines
~ in ASSEMBLER (F)
21 GY26-3700
~MMON statement

in FORTRAN IV (E)

25
compile-time processing
of
generation of intermediate text for
nonsyntactical errors encountered
in
in FORTRAN IV-TO-PL/1 LCP
29
COMMON statements
in FORTRAN IV (G) COMPILER
25
allocation for
Common storage for communication
in TSO COMMAND PROCESSOR VOL4-EXEC 36
Common table linkage
in ASSEMBLER (F)
21
COMMON variables
in FORTRAN IV (G) COMPILER
25
allocation of storage for
listing of
Common Work Area
in ALGOL (F) COMPILER
26
Common work area-IEBCOMPR
in UTILITIES
32
Common Write routine (COMWRITE)
in TeAM SERVICEABILITY AIDS
30
entry
functions
COMMONA. field in COMMON
in TSO COMMAND PROC VOL5-0PERATOR 36
COMMONB, field in COMMON
in TSO COMMAND PROC VOL5-0PERATOR 36
COMMONC. field in COMMON
in TSO COMMAND PROC VOL5-0PERATOR 36
Commoninq of subscripts
in PL/I (F) COMPILER
29

GY28-6601

GY33-7000
GY28-6638
GY28-6774
GY26-3700
GY28-6638

GY33-8000
GY28-6614
GY30-2027

GY28-6775
GY28-6775
GY28-6775
GY28-6800

COMMSF
---rn-MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
COMMSG. field in COMMON
---rn-TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
COMMSGO
in MACHINE-CHECK HANDLER. S360 M65 31 GY27-7155
COMMSG1
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
Communication
in CRJE PLM
36 GY30-2011
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
between modules
common storage area
with terminal
Communication area
in FORTRAN IV (E)
25 GY28-6601
definition of
format of
in interface module
initialization of
in FORTRAN IV-TO-PL/l LCP
29 GY33-7000
in GRAPHIC SUBRTN. PACKAGE
25 GY27-7152
creation of
information from
termination of
use of
in LINKAGE EDITOR (F)
31 GY28-6667
in LOADER
31 GY28-6714
format of
initialization of
in MACHINE-CHECK HANDLER. S360 M85 31 GY27-7184
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
COMFL, communication flag
DATAAR, pointer to data area
debugging hints
ERRMESS. pointer to error message buffer
for initialization

Communication - Communications

Communication area
I in PL/I SYNTAX CHECKER PLM
29 GY33-8009
l--------------------------------------(continued)
format of (COMAREA DSECT)
passed from system interface
pointer to COMAREA DSECT (COMREG)
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
in UTILITIES
32 GY28-6614
IEBDG
IEHMOVE
Communication area, LCP
in FORTRAN IV-TO-PL/1 LCP
29 GY33-7000
Communication Area (MCH)
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
Communication areas for PTOP
in S/360-1130 DATA TMN. - FORTRAN 25 GY27-7161
Communication between phases
in PL/I (F) COMPILER
29 GY28-6800
Communication between 2250 operator and GSP
program
in GRAPHIC SUBRTN. PACKAGE
25 GY27-7152
Communication conventions
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Communication devices
in TCAM SERVICEABILITY AIDS
30 GY30-2027
Communication flags
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
COMFL from system interface
COMFLAGS (between internal subroutines)
COMFLAG1 (DATAAREA)
COMFLAG2 (DATAAREA)
communication line administrator module
in CRJE PLM
36 GY30-2011
flowchart
messages requested
microfiche directory
module description
register usage
Communication lines, requirements for
grouping
in BASIC TELECOMM. ACCESS METHOD
30 GY30-2001
Communication link
in S/360-1130 DATA TMN. - FORTRAN 25 GY27-7161
establishing
reestablishing
terminating
communication mode
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
explicit
implicit
Communication parameter list
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Communication Region
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
bit meanings
description
format
initialization
Communication region-IEBcoMPR
in UTILITIES
32 GY28-6614
Communication region-IEBTCRIN
in UTILITIES
32 GY28-6614
Communication scheme (MCH)
in MACHINE-CHECK HANDLER, s360 M65 31 GY27-7155
Communication table
in FORTRAN IV (H) COMPILER
25 GY28-6642
contents of
Communication vector table (CVT)
in CATALOG MANAGEMENT
30 GY28-6606
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
initializing the, for GFX
testing for GFX
in GRAPHICS ACCESS METHOD
30 GY27-7113
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
in TSO CATALOG MANAGEMENT
36 GY28-6745
Communication with control program

78
in PL/I (F) COMPILER
29
Communications
in MACHINE-CHECK HANDLER, M135/145 30
area
between modules
in MACHINE-CHECK HANDLER, M155/165 30
between modules
with the operator
in MACHINE-CHECK HANDLER, s360 M85 31
between operator and MCH
Communications Task
using lOS Interface
in ONLINE TEST EXECUTIVE PROGRAM
37
at the console
from the OLT programs
paths for
Communications area
in COBOL (F)
24
in FORTRAN IV SYNTAX CHECKE.R PI.M
25
in MACHINE-CHECK HANDLER, M155/165 30
in UPDATE ANALYSIS PROGRAM
36
Communications Control for Logon
Prompter
in TSO CONTROL PROGRAM
36
communications data area
in TSO COMMAND PROCESSOR VOL4-EXEC 36
Communications ECB
in CRJE PLM
36
in TSO COMMAND PROCESSOR VOL2-CALL 36
in TSO COMMAND PROCESSOR VOL4-FREE 36
in TSO COMMAND PROCESSOR VOL6-RUN 36
Comrounications ECB for subcommands
in TSO COMMAND PROCESSOR VOL1-ACCT 36
Communications line errors
in CRJE PLM
36
Communications line queue
in QUEUED TELECOMM. ACCESS METHOD 30
Communications parameter area (CPA)
in MVT JOB MANAGEMENT
36
format and description of
used by ASB routine
communications parameter list
in TCAM SERVICEABILITY AIDS
30
Communications queue
in TELECOMMUNICATION ACCESS METHOD 30
Communications region
in PL/I (F) COMPILER
29
contents
Control Code word
dictionary block
initialization
of dictionary
options
tables
use
ZPRNAM
in 7074 EMULATE FOR M/165
field descripticns
format
use as interface
Communications Routine (SGCOM)
in s/360 JOB PROCESSING 1130/2250 36
chart
description of
communications serviceability facilities
in QUEUED 'TELECOMM. ACCESS METHOD 30
Communications table (OUTCDMTB)
in TSO COMMAND PROC VOL5-0UTPUT
36
Communications task
in MFT SUPERVISOR
36
attention interruption handler
entry pOint
flowchart
functional description
module description
module synopsis

GY28-6800
GY27-7~37

GY27-7198
GY27-7184

GY28-6651

GY28-6382
GY28-6831
GY27-7198
GY28-7106
GY28-7199
GY28- 6774
GY30- 2011
GY28-6772
GY28-6774
GY28- 6776
GY28- 6771
GY30-2011
GY30- 2002
GY28-666Q

GY30-2027
GY30-2029
GY28-6800

GY27-7228

GY27-7166

GY30-2002
GY28-6775
GY27-7236

,
79

Communications task
I in MFT SUPERVISOR
36 GY27-7236
L--------------------------------------(continued)
console switch
entry point
flowchart
functional description
module description
module synopsis
external interruption handler
entry point
flowchart
functional description
module description
module synopsis
initialization module
entry point
flowchart
functional description
module description
module synopsis
Log function
Log writer flowchart
LOG. Write-to-Log
flowchart
router module
entry point
flowchart
functional description
module description
module synopsis
task control block
unit control module
format of
wait module
entry point
flowchart
functional description
module description
module synopsis
in MVT SUPERVISOR
36 GY28-6659
Device Independent Operator Console
Support routines (DIDOCS)
description
detailed routine descriptions and
flowcharts
Asynchronous Error
Conunand
DCK 1

DCK 2
OCK 3

Delete 1
Delete 2
Delete 3
Delete 4
Display 1
Display 2
Light Pen/Cursor
service
Message 1
Message 2
Model 85 I/O
Open/Close
Options
Processor
Roll Mode
Timer Interpreter
2250 I/O
2260 I/O

External Interruption Handler routine
entry point name(s) of
flowchart of
module name for
synopsis of
External Processor routine
entry point name(s) of

Communications - Communications

flowchart of
module name for
synopsis of
Initialization routine
entry point name(s) of
flowchart of
module name for
synopsis of
Miscellaneous Lookup Services routine
entry point name(s) of
module name for
synopsis of
Open/Close routines
entry point names of
flowcharts of
module name(s) for
synopsis of
Processor routines
entry point names of
flowcharts of
module name(s) for
synopsis of
Reply Processor routine
entry point name(s) of
module name for
synopsis of
Request block
entry point name of
module name for
Router routine
entry point name(s) of
flowcharts of
module name for
synopsis of
task control block
entry point name of
module name for
unit control tables (UCBs)
entry point names of
module name for
synopsis of
Wait routine
charts of
entry point name(s) of
module name for
synopsis of
Conununications task with Multiple
Console support
in MFT SUPERVISOR
36 GY27-7236
console switch routines
entry point
flowchart
functional description
module description
module synopsis
parameter list
delete operator message (OOM)
routine
entry point
flowchart
functional description
module description
module synopsis
device interface routine
entry point
flowchart
functional description
module description
module synopsis
event indication list
extended save area
mini-router
entry point
functional description
module description
module synopsis

Communications - compiled

80

Communications task with Multiple
I Console support
I in MFT SUPERVISOR
36 GY27-7236
L--------------------------------------(continued)
NIP message buffer writer
entry point
flowchart
functional description
module description
module synopsis
router
entry point
flowchart
functional description
module description
module synopsis
WTO/R service module
entry point
flowchart
functional description
module description
module synopsis
Communications vector table
in CRJE PLM
36 GY30-2011
in MFT SUPERVISOR
36 GY27-7236
format
use
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
Communications vector table (CVT)
in JOB MANAGEMENT
36 GY28-6613
36 GY28-6659
in MVT SUPERVISOR
definition of
entry point name of
format of
module name for
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
Commutative operations
in FORTRAN IV (H) COMPILER

25 GY28-6642

COMNEST
in MACHINE-CHECK HANDLER. s360 M65 31 GY27-7155
COMNUC
---rn-MACHINE-CHECK HANDLER. S360 M65 31 GY27-7155
COMOBREX
in MACHINE-CHECK HANDLER. S360 M65 31 GY27-7155
COMPARE
in ONLINE TEST EXECUTIVE PROGRAM
Compare action
in PL/I (F) COMPILER
COMPARE Generator
in COBOL (E)
COMPARE subroutine
in COBOL (F)
Compare weight
in PL/I (F) COMPILER
Comparing header and trailer labels
in UTILITIES
Comparing input records-IEBCOMPR
in UTILITIES
Comparing labels as data
in UTILITIES
Comparing member names-IEBCOPY
in UTILJ;TIES
Comparing records
in UTILITIES
Comparing sequence numbers-IEBUPDAT
in UTILITIES
Comparison. return code to integer
in TSO COMMAND PROC VOL6-WHEN/END
Comparison matrix

37 GY28-6651
29 GY28-6800
24 GY24-5009
24 GY28-6382
29 GY28-6800
32 GY28-6614
32 GY28-6614
32 GY28-6614
32 GY28-6614
32 GY28-6614
32 GY28-6614
36 GY28-6776

in PL/I SYNTAX CHECKER PLM
29 GY33-8009
PL/I compiler with syntax checker
Comparison table
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
Compatibility
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
modular
PL/I library
Compatibility feature
in EMULATOR FOR 7090/7094/7094II
35 GY27-7187
components
instruction format
instruction set
operation
relationship to emulator program
translation instruction
in 7074 EMULATE FOR M/165
GY27-7228
components
description
relationsihp to emulator program
Compatible QTAM
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
GET/PUT support
message retrieval support
Compatible QTAM routines for an
application program
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Compilation
in FORTRAN IV (E)
25 GY28-6601
data sets used for
in PL/I (F) COMPILER
29 GY28-6800
as a job step
bypassed
termination
Compilation. instructions for halting to
list phase output
in COBOL (F)
24 GY28-6382
Compilation input
in FORTRAN IV (E)
25 GY28-6601
deblocking of
Compilation output
in FORTRAN IV (E)
25 GY28-6601
blocking of
Compilation parameters
in COBOL (F)
24 GY28-6382
Compilation Phase (IEX50)
in ALGOL (F) COMPILER
26 GY33-8000
Description
Flowcharts
Compile Component
in COBOL (E)
Compile-time arithmetic
in COBOL (F)
Compile-time I/O errors
in FORTRAN IV (E)
processing of
Compile-time processor
in PL/I (F) COMPILER
communications region
constants
control interfaces
identifiers
internal formats of text
logical phase
operators
output string
SOURCE option
Compile time statement
in PL/I SYNTAX CHECKER PLM
Compiled code. edit-directed
in PL/I SUBROUTINE LIBRARY

24 GY24-5009
24 GY28- 6382
25 GY28- 6601
29 GY28-6800

29 GY33- 8009
29 GY28-6801ll

81
Compiler
in FORTRAN IV (E)
25 GY28-6601
components of
control flow in
data sets used by
input to
input/output requests of
main storage allocation to
organization of
output from
overall operation
relation to operating system
system macro-instructions used by
tables used by
in FORTRAN IV (G) COMPILER
25 GY28-6638
arrangement
assembly and operation of
code produced by
data structures
design of
flags used
general register usage
initialization of
limitations of
machine configuration for
messages
organization of
output from
purpose of
receiving control
relationship to system
rolls used in
storage configuration
termination of
in FORTRAN IV (H) COMPILER
25 GY28-6642
initialization
I/O flow
generated branch
organization of
purpose of
size of
structure of
termination
in PL/I (F) COMPILER
29 GY28-6800
as part of operating system
completion code
functions
initialization
invocation by calling program
output data sets
phases
pseudo variables
purpose
storage requirements
Compiler, Function of
in COBOL (E)
24 GY24-5009
Compiler area requirements
in ALGOL (F) COMPILER
26 GY33-8000
Compiler Common Area
in COBOL (E)
.24 GY24-5009
Compiler control
in PL/I (F) COMPILER
29 GY28-6800
Compiler Control Field (HCOMPMOD)
in ALGOL (F) COMPILER
26 GY33-8000
Compiler control modules
in PL/I (F) COMPILER
29 GY28-6800
Compiler control phases, tables
in PL/I (F) COMPILER
29 GY28-6800
Compiler control routines
in PL/I (F) COMPILER
29 GY28-6800
Compiler core storage map
in COBOL (F)
24 GY28-6382
Compiler Diagnostics
in COBOL (E)
24 GY24-5009
.compiler entry
in ALGOL (F) COMPILER
26 GY33-8000

Compiler - Completion
Compiler exit
in ALGOL (F) COMPILER
26 GY33-8000
Compiler functions, scan in pseudo-code
phase
in PL/I (F) COMPILER
29 GY28-6800
Compiler Initialization
in COBOL (E)
24 GY24-5009
in COBOL (F)
24 GY28-6382
Compiler Input/Output Package (ClOP)
in COBOL (E)
24 GY24-5009
Compiler interface
in ALGOL (F) COMPILER
26 GY33- 8000
Compiler invocation
in ALGOL (F) COMPILER
26 GY33- 8000
Compiler logic, guide to
in PL/I (F) COMPILER
29 GY28-6800
Compiler modules
in ALGOL (F) COMPILER
26 GY33-8000
Compiler options
in ALGOL (F) COMPILER
26 GY33- 8000
Compiler organization
in ALGOL (F) COMPILER
26 GY33-8000
Compiler organization and control
diagram
in PL/I (F) COMPILER
29 GY28-6800
Compiler output
in ALGOL (F) COMPILER
26 GY33-8000
Compiler phases
in ALGOL (F) COMPILER
26 GY33-8000
Directory (IEXOO)
Initialization (IEX10)
Scan 1/11 (IEX11)
Identifier Table Manipulation (IEX20)
Diagnostic Output (IEX21)
Scan III (IEX30)
Diagnostic Output (IEX31)
SUbscript Handling (IEX40)
Compilation (IEX50)
Termination (IEX51l
Compiler read routine
in PL/I (F) COMPILER
29 GY28-6800
Compiler text
in COBOL (F)
24 GY28-6382
COMPLCOD, in WORKAREA
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

Complement form of generation number
in CATALOG MANAGEMENT
in TSO CATALOG MANAGEMENT

30 GY28-6606
36 ~Y28-6745

'complete bit' (ECMP)
in PL/I SUBROUTINE LIBRARY
'complete bit' (event variable)
in PL/I SUBROUTINE LIBRARY
Complete statement (PL/I)
in PL/I pYNTAX CHECKER PLM
scanning for
Completion code
in MFT SUPERVISOR
ABEND and
POST and
in PL/I (F) COMPILER
Completion codes
in BASIC TELECOMM. ACCESS METHOD
in INPUT/OUTPUT SUPERVISOR
placement by I/O supervisor
system completion codes, defined
table of system completion codes
in MVT JOB MANAGEMENT
in SORT/MERGE
Completion codes generated by
subsystem
in TSO CONTROL PROGRAM

29 GY28-6801
29 GY28-6801
29 GY33-8009

36 GY27-7236
29 GY28-6800
30 GY30-2001
30 GY28-6616

36 GY28-6660
33 GY28-6597
36 GY28-7199

1M

82

COMPLETION - CONAREA
COMPLETION pseudo-variable
in PL/I SUBROUTINE LIBRARY

29 GY28-6801

Complex
in FORTRAN IV (H) COMPILER
25
expressions
variables
COMPLEX (keyword attribute)
29
in PL/I SYNTAX CHECKER PLM
checking as arithmetic attribute
in ENTRY and PROCEDURE statements
Complex arguments
29
in PL/I SUBROUTINE LIBRARY
COMPLEX CONST roll
in FORTRAN IV (G) COMPILER
25
Complex constant
in PL/I SYNTAX CHECKER PLM
29
Complex directors
in PL/I SUBROUTINE LIBRARY
29
COMPLEX statement
in FORTRAN IV-TO-PL/1 LCP
29
Complex-to-string directors
in PL/I SUBROUTINE LIBRARY
29
Component (switch)
in ALGOL (F) COMPILER
Components of the Allocation Phase
in COBOL (E)
Components of the assembler
in ASSEMBLER (F)
Components of the Syntax Scan
in COBOL (E)

GY28-6642

GY33-8009

COMPTCODE, field in STAEWA
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

COMPUT routine
-rn-COBOL (F)

24 GY28-6382

computation
in FORTRAN IV (E)
array displacement
subscript
Computational subroutines
in PL/I SUBROUTINE LIBRARY

25 GY28-6601

29 GY28-6801

GY28-6801
GY28-6638
GY33-8009
GY28-6801
GY33-7000
GY28-6801

COMPUTE statement
in COBOL (F)
COMPUTE strings
in COBOL (F)
Computed GO TO
in FORTRAN IV (H) COMPILER
operators
skeleton instructions
Computed GO TO statement
in FORTRAN IV (E)
compile-time processing of

24 GY28-6382
24 GY28-6382
25 GY28-6642

25 GY28-6601

26 GY33-8000
24 GY24-5009
21 GY26-3700

Computer-generated control blocks
in PL/I SUBROUTINE LIBRARY

29 GYL8-6801

COMPOA3
in COBOL-TO-PL/1 LCP

29 GY33-7007

COMP1A2
in COBOL-TO-PL/1 LCP

29 GY33-7007

24 GY24-5009

Composite dictionaries
in LINKAGE EDITOR (F)
31 GY28-6667
Composite ESD
in LINKAGE EDITOR (F)
31 GY28-6667
Composite external symbol dictionary (CESD)
in LINKAGE EDITOR (F)
31 GY28-6667
contents
definition
general description of processing
identifier
internal format
introduction to
making an entry in
record
scanning
synopsis of processing
written out on SYSLMOD
Composite external symbol dictionary entry
in LOADER
31 GY28-6714
definition of
internal format
making an entry
processing of
record format of

--rn

compound IF statements
in COBOL (F)
Compound statement
in ALGOL (F) COMPILER

COMSYSRS
in MACHINE-CHECK HANDLER, s360 M65 31 GY27-7155

Compress
in TSO COMMAND PROC VOL6-SUBMIT
routine
operation
Compressing in place
in UTILITIES

24 GY28-6382

COMRAM
---rn-MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
COMRETC, field in COMMON
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-67761
COMROUT, field in COMMON
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
COMRR

COBOL (E)

24 GY24-5009

COMSBAD
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
COMSIRB
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
COMSPARE
in MACHINE-CHECK HANDLER, s360 M65 31 GY27-7155
COMSVCQ
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155

26 GY33-8000
COMTBL table
---rnCOBOL (F)

24 GY28-6382

36 GY28-6776
COMTRANS
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
32 GY28-6614

COMPRNT
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
COMPSA
---rn-MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155

COM9 macro
--rn EMULATOR FOR 7090/7 094/7094II

35 GY27-7187

CON
- - i n COBOL (E)

24 GY24-5009

CONAREA (field in test communication table)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-677~

83
CONAREA (field in test communication table)
I in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
L--------------------------------------(continued)
description of
Concatenate character
in PL/I SYNTAX CHECKER PLM
(60-character set)
CAT (48-character set)
Concatenate data sets
in TSO TMP & SERVICE ROUTINES
Concatenated data sets
in LINKAGE EDITOR (F)
on SYSLIB
on SYSLIN
Concatenated data sets (on SYSLIN)
in LOADER
Concatenation
in INPUT/OUTPUT SUPPORT
end-of-volume processing
Concatenation, in 48 character set
in PL/I (F) COMPILER
COND parameter
in MVT JOB MANAGEMENT
Condense module
in CRJE PLM
condensed symbol table (CST)
in LOADER
creation of
format of
purpose of
routine (IDMINI) flowchart

29 GY33-8009

36 GY28-6770
31 GY28-6667

31 GY28-6714
30 GY28-6609
29 GY28-6800
36 GY28-6660
36 GY30-2011
31 GY28-6714

CONDIS 
---rn-PL/I SYNTAX CHECKER PLM
29 GY33-8009
subroutine for ON, SIGNAL, REVERT,
statements (IKM21)
CON DIS table
in COBOL (F)
24 GY28-6382
Condition codes
in INPUT/OUTPUT SUPERVISOR
"busy bits"
diagram of use
inoperative path
SIO instruction
in JOB MANAGEMENT
EXEC sta tement
JOB statement
in MVT JOB MANAGEMENT
EXEC statement
JOB statement
Condition keyword
in PL/I SYNTAX CHECKER PLM
in ON, SIGNAL, REVERT statements
Condition-name, processing
in COBOL-TO-PL/1 LCP
Condition name entries
in COBOL (F)
format
Condition-name record
in COBOL-TO-PL/1 LCP
Condition names
in COBOL (F)
Condition operators
in JOB MANAGEMENT
EXEC statement
JOB statement
Condition prefix
in PL/I SYNTAX CHECKER PLM
checking
conflicts (PREFTAB)
flags:

30 GY28-6616

36 GY28-6613
36 GY28-6660

29 GY33-8009
29 GY33-7007
24 GY28-63B2
29 GY33-7007
24 GY28-6382
36 GY28-6613

29 GY33-B009

CONAREA - Configurator

in On-unit
options:
subroutine PREFTEST (IKM03)
Condition switch settings (Phase F7)
in ASSEMBLER (F)
Conditional data set disposition
in TSO COMMAND PROC VOL5-LISTDS
Conditional disposition
in JOB MANAGEMENT
in TSO COMMAND PROC VOL2-DELETE
in TSO COMMAND PROCESSOR VOL4-EXEC
Conditional disposition flags, DS
in TSO COMMAND PROCESSOR VOL2-CALL
Conditional dispositions
in MVT JOB MANAGEMENT
Conditional expression
in ALGOL (F) COMPILER
in ALGOL-TO-PL/1 LCP
Conditional statement
in ALGOL (F) COMPILER
Conditionally retryable instruction
in MACHINE-CHECK HANDLER, S360 M65
Conditions, machine-check
in MACHINE-CHECK HANDLER, M155/165
Conditions other than on-conditions
in PL/I SUBROUTINE LIBRARY

21 GY26-3700
36 GY2B-6775
36 GY28-6613
36 GY28-6772
36 GY2B-6774
36 GY28-6772
36 GY28-6660
26 GY33- 8000
29 GY33-7006
26 GY33-BOOO
31 GY27-7155
30 GY27-7198
29 GY28-6801

Configuration
in TESTRAN
37
Configuration (storage requirements)
in PL/I SYNTAX CHECKER PLM
29
machine needed by system containing
syntax checker
of syntax checker program
Configuration considerations, syntax
checker
in FORTRAN IV SYNTAX CHECKER PLM
25
Configuration Display routine (IITCFG)
in EMULATOR FOR 7090/7094/709411
35
Configuration of the control program
in ONLINE TEST EXECUTIVE PROGRAM
37
Configuration Section
in COBOL (F)
24
Configura tor
in TCAM SERVICEABILITY AIDS
Configurator Add Scheduler
in TCAM SERVICEABILITY AIDS
entry
functions
Configurator Change sub-module
in TCAM SERVICEABILITY AIDS
entry
functions
Configura tor Delete Scheduler module
in TCAM SERVICEABILITY AIDS
entry
functions
Configurator Delete sub-module
~n TCAM SERVICEABILITY AIDS
entry
functions
Configura tor sub-module
in TCAM SERVICEABILITY AIDS
entry
functions
Configura tor sub-module
in TCAM SERVICEABILITY AIDS
entry
functions
Configura tor sub-module
in TCAM SERVICEABILITY AIDS
entry
functions
Configurator sub-module
in TCAM SERVICEABILITY AIDS

GY28-6611
GY33-8009

GY28-6831
GY27-7187
GY28-6651
GY2B-6382

30 GY30-2027
30 GY30-2027

30 GY30-2027

30 GY30-2027

30 GY30-2027

30 GY30-2027

30 GY30-2027

30 GY3D-2027

30 GY30-2027

D

84

Confiqurator - Construction

Configurator sub-module
I in TCAM SERVICEABILITY AIDS
30 GY30-2027
L--------------------------------------(continued)
entry
functions
Configurator sub-module
in TCAM SERVICEABILITY AIDS
30 GY30-2027
functions
Conflict
in ALGOL-TO- PL/1 LCP
conflict masks (ATTXMASK,CMASK)
in PL/I SYNTAX CHECKER PLM
debugging hints for
CONGET
-rIlCOBOL (E)

29 GY33-7006
29 GY33-8009

24 GY24-5009

CONJG

---rn FORTRAN

IV (H) COMPILER

25 GY28-6642

Connecting control volumes
in CATALOG MANAGEMENT
in TSO CATALOG MANAGEMENT

30 GY28-6606
36 GY28-6745

CONSECUTIVE
in ALGOL-TO~PL/1 LCP
CONSECUTIVE (ENVIRONMENT option)
in PL/I SYNTAX CHECKER PLM

29 GY33-7006
29 GY33-8009

Considerations (MCH)
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
design
programming
Consistency of
in PL/I (F)
Consistency of
in PL/I (F)

attributes
COMPILER
options
COMPILER

Console
in INTRO. TO CONTROL PROGRAM LOGIC
in MACHINE-CHECK HANDLER, M155/165
in MFT SUPERVISOR
alternate
device support modules
output queue
switch modules
core image record
Console alarm bell
in INPUT/OUTPUT SUPERVISOR
Console Alarm routine
in MVT SUPERVISOR
Console communications
in ONLINE TEST EXECUTIVE PROGRAM
Console Control Table (CCT)
in GRAPHIC JOB PROCESSOR SUPPORT
in S/360 JOB PROCESSING 1130/2250
description of
format and contents of
Console emulation
in 7074 EMULATE FOR M/165
message handling
routine (IIOURTYP)
flowchart
function
MOD
Console flag switch
in JOB·MANAGEM~NT
Console interrupt routine
in JOB MANAGEMENT
Console Write routine, IGFMCHEl
in MACHINE-CHECK HANDLER" M135/145
flowchart
module description
Consoles

29 GY28-6800
29 GY28-6800
36 GY28-6605
30 GY27-7198
36 GY27-7236

30 GY28-6616
36 GY28-6659
37 GY28-6651
36 GY27-7159
36 GY27-7166

GY27-7228

in INITIAL PROGRAM LOADER AND NIP
alternative
composite
determining readiness
determining readiness
(multiprocessing)
initialization routine
Multiple Console Support (MCS)
primary
Constant
in ALGOL (F) COMPILER
in Scan 1/11 Phase
in Scan III Phase
internal name
in FORTRAN IV (H) COMPILER
complex
dictionary entry
relative addresses for
in TESTRAN
Constant, Internal 1 Text
in COBOL-TO-PL/1 LCP
Constant chain
in PL/I (F) COMPILER
Constant Definition Elements
in COBOL (F)
Data A-Text format
Constant names
in SORT/MERGE
Constant Pool
in ALGOL (F) COMPILER
Constant/variable usage information
in FOR~RAN IV (H) COMPILER
phase 15
Constants
in FORTRAN IV (E)
assignment of relative addresses
dictionary chains for
in PL/I (F) COMPILER
chain
contextual use
conversion to binary
count
dictionary entries
in compile-time processor string
marker
in PL/I SYNTAX CHECKER PLM
complete and valid
flags for:
FLOATFL
pointer to start of valid (OUTP)
testing. (IKM134)
token codes
general code
specific type code
types of
Constants for IEBDG
in UTILITIES
Constants pool
in PL/I (F) COMPILER
CONSTR register
in FORTRAN IV (G) COMPILER
definition
description
Constructing text information
in FORTRAN IV (H) COMPILER

36 GY28-6661

26 GY33-8000

25 GY28-6642

37 GY28-6611
29 GY33-7007
29 GY28-6800
24 GY28-6382
33 GY28-6597
26 GY33-8000
25 GY28-6642
25 GY28-6601
to
29 GY28- 6800

29 GY33-8009

32 GY28-6614
29 GY28-6800
25 GY28-6638

25 GY28-6642

36 GY28-6613
36 GY28-6613
30 GY27-7237

Construction of resident tables
in FORTRAN IV (E)
BLDL table
blocking table
dictionary
overflow table
patch table

25 GY28-6601

85
construction of resident tables
I in FORTRAN IV (E)
25 GY28-6601
l--------------------------------------(continued}
SEGMAL
CONTAB
in TSO COMMAND PROC VOL6-SUBl"1IT
built
fields of
used
CONTABPT. in control
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

36 GY28-6776

Construction - Control

Continuation statement
in JOB MANAGEMENT
CONTINUE command processor
in CRJE PLM
CONTINUE statement
in FORTRAN IV (E)
compile-time processing of
in FORTRAN IV-TO-PL/1 LCP

36 GY28-6613
36 GY30-2011
25 GY28-6601
29 GY33-7000

CONTIN1
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
in flowchart
in method of operation diagram

CONTBL table

--rnCOBOL

(F)

24 GY28-6382

Contents. table of
in TCAM SERVICEABILITY AIDS
30
in TSO COMMAND PROC VOL6-TERMINAL 36
in TSO COMMAND PROCESSOR VOL6-RUN 36
Contents directory
in MVT SUPERVISOR
36
definition of
Contents Directory Entry (CDE)
in INITIAL PROGRAM LOADER AND NIP 36
in LOADER
31
format of
in MVT SUPERVISOR
36
abnormal release of
construction of
definition of
format of
normal release of
in TSO COMMAND PROCESSOR VOL7-TEST 36
format of
use by IKJEGSYM
Contents of the Data Attribute
in COBOL (E)
24
Contents Supervision
in TSO COMMAND PROCESSOR VOL7-TEST 36
description of
interface with Test
Contents Supervision. common subroutines
in MVT SUPERVISOR
36
description of
entry point names of
flowchart (s) of
module name for
synopsis of
Context switching
in ALGOL (F) COMPILER
Contextual
in PL/I (F) COMPILER
constants
identifiers
pictures

GY30-2027
GY28-6776
GY28-6776
GY28-6659
GY28-6661
GY28-6714
GY28-6659

GY28-6777

GY24-5009
GY28-6777
of
GY28-6659

26 GY33-8000
29 GY28-6800

CONTIG allocation option
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
Contiguous space requests
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
Continuation bins
in SORT/MERGE
Continuation card-IEBDG
in UTILITIES
Continuation card image
in FORTRAN IV (E)
scanning of
Continuation check routine
.in JOB MANAGEMENT
Continuation record
in TESTRAN

33 GY28-6597
32 GY28-6614
25 GY28-6601
36 GY28-6613
37 GY28-6611

CONTIN2
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
in flowchart
in method of operation diagram
CONTREG (on return to system interface)
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
pointer to register save areas (IKM12)
Control
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
blocks. relationship between emulator
program and Operating System
information
statements
words. data
in LOADER
31 GY28-6714
and relocation dictionary record
format
dictionaries
information processing
record
record format
record processing
in PL/I- (F) COMPILER
29 GY28-6800
diagram
of dictionary block
of text block
in SORT/MERGE
33 GY28-6597
blocks
fields
statements
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
module hierarchy
module. IKJEFGOO
passes to the TMP
sections. list of
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
block for service routine
flow
module hierarchy
passing of
sections (CSECTS)
transfer between modules
Control. from LOGON routine. indicator
in TSO COMMAND PROC VOL4-LISTBC
36 GY28-6774
Control. passing of by transient
modules
in MACHINE-CHECK HANDLER. M135/145 30 GY27-7237
Control action flags
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
Control and relocation dictionary record
in LINKAGE EDITOR (F)
31 GY28-6667
contents
creation of
format
in MVT SUPERVISOR
36 GY28-6659
format of
Control Area (CTLAREA)
in COBOL-TQ-PL/1 LCP
29 GY33-7007

86

Control - Control

Control areas for TCAM
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Control block area (CTLBLK)
in FORTRAN IV (G) COMPILER
25 GY28-6638
Control block fonnats
in GRAPHICS ACChSS MhTHOD
30 GY27-7113
Control block record
in COBOL-TO-PL/l LCP
29 GY33-7007
Control block routine
in COBOL-TO-PL/l LCP
29 GY33-7007
Control block table
in COBOL-TO-PL/1 LCP
29 GY33-7007
Control blocks
in BASIC DIR£CT ACCESS METHOD
30 GY28-6617
buffer control block (BCB)
data control block (DCB)
data extent block (DEB)
data event control block (DECB)
input/output block (lOB)
in CRJE PLM
36 GY30-2011
in GRAPHIC SUBRTN. PACKAGE
25 GY27-7152
accessing
chaining
creation and termination
formats of
main storage arrangements
names of
relationship
validity
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
communications between control blocks
diagrams of
used by I/O supervisor
in PL/I (F) COMPILER
29 GY28-6800
DECLARE
OPEN
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Control blocks
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
computer-generated
input/output
multitasking
record I/O
in S/360-1130 DATA TMN. - FORTRAN 25 GY27-7161
BTAM use of by PTOP
DCB

DECB
definition of
formats of
GTCB
GTCOM
IQE
IRB
processing information in
in TELECOMMUNICATION ACCESS METHOD
in TSO COMMAND PROC VOL1-DELETE
in TSO COMMAND PROC VOL4-LISTALC
in TSO COMMAND PROC VOL5-LISTCAT
description of
in TSO COMMAND PROC VOL5-LISTDS
in TSO COMMAND PROC VOL6-PROTECT
in TSO COMMAND PROC VOL6-TERMINAL
in TSO COMMAND PROCESSOR VOL4-HELP
in TSO COMMAND PROCESSOR VOL6-RUN
in 7074 EMULATE FOR M/165
Control blocks, BTAM
in BASIC TELECOMM. ACCESS METHOD
linkages
role in creating access method
Control blocks, QTAM
in QUEUED TELECOMM. ACCESS METHOD
Control blocks, relation of
in SEQUENTIAL ACCESS METHODS
BSAM (basic sequential access
method)
QSAM (queued sequential access

30
36
36
36

GY30-2029
GY28-6771
GY28-6774
GY28-6775

36
36
36
36
36

GY28-6775
GY28-6776
GY28-6776
GY28-6774
GY28-6776
GY27-7228

30 GY30-2001

30 GY30-2002
30 GY28-6604

method)
Control blocks (data areas)
in TSO COMMAND PROCESSOR VOL1-ACC'I 36
Control card
in ALGOL-TO-PL/l LCP
29
Control card analyzer routine-IEBTCRIN
479ft.
in UTILITIES
32
Control-card read and scan (IHGURD02)
in UPDATE ANALYSIS PROGRAM
36
Control-card routine
in UPDATE ANALYSIS PROGRAM
36
Control card scanner for IEHMOVE and
IEHLIST
in UTILITIES
32
Control-card tables
in UPDATE ANALYSIS PROGRAM
36
Control cards
in PL/I (F) COMPILER
29
Control cards, in SYS1.HELP
in TSO COMMAND PROCESSOR VOL4-HELP 36
Control cards, LCP
in FORTRAN IV-TO-PL/l LCP
29
Control cards, Postprocessor
in 7074 EMULAT£ FOR M/165
Control cards for tape formatting
programs
in EMULA'I'OR FOR 7090/7094/7094II
35
Control character
in TELECOMMUNICATION ACCESS METHOD 30
Control character end-of-block routines
in SEQUENTIAL ACCESS METHODS
30
chained scheduling
normal scheduling
Control character for punched
output-IEBPTPCH
in UTILITIES
32
Control characters
in MVT JOB MANAGEMENT
36
American National Standard
machine
in S/360-1130 DATA TMN. - FORTRAN 25
Control characters, in PARShTAB
in TSO COMMAND PROCESSOR VOL4-HELP 36
illustrated as input
relationship to PDL fields
search for, indicator
test for
Control characters, line
in TCAM SERVICEABILITY AIDS
30
Control Code word
in PL/I (F) COMPILER
29
Control codes
in FORTRAN IV (E)
25
in TSO TMP & SERVICE ROUTINES
36
to Default service routine
Control command, MODIFY operator
in TCAM SERVICEABILITY AIDS
30
Control core
37
in TESTRAN
Control dictionaries
in LINKAGE EDITOR (F)
31
generation
purpose
Control driver
in FORTRAN· IV (G) COMPILER
25
definition
description
formats of
Control Field, Standard Record
in COBOL (E)
24
Control field of PARSETAB
in TSO COMMAND PROCESSOR VOL4-HELP 36
Control flags
in TSO COMMAND PROC VOL5-0PERATOR 36
in TSO COMMAND PROCESSOR VOL6-RUN 36

GY28-6771
GY33-7006
GY28-6614
GY28-7106
GY28-7106
GY28-6614
GY28-7106
GY28-6800
GY28-6774
GY33-7000
GY27-7228
GY27-7187
GY30-2029
GY28-6604

GY28-6614
GY28-6660
GY27-7161
GY28-6774

GY30-2027
GY28-6800
GY28-6601
GY28-6770
GY30-2027
GY28-6611
GY28-6667

GY28-6638

GY24-5009
GY28-6774
GY28-6775
GY28-6776

87
Control flags
I in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
L--------------------------------------(continued)
in DAPB04
IN DSNPDE
in RUNPDL
Control flow
in FORTRAN IV (E)
25 GY28-6601
for PRFRM compilations
for SPACE compilations
in GRAPHIC SUBRTN. PACKAGE
25 GY27-7152
among GSP routines
among image generation
subroutines
among initiation and termination
subroutines
in S/360-1130 DATA TMN. - FORTRAN 25 GY27-7161
overall
system/360
1130 system
37 GY28-6611
in TESTRAN
Control flow. phase 20
in FORTRAN IV (H) COMPILER
25 GY28-6642
Control flow (hierarchy)
in TSO COMMAND PROC VOL5-LISTCAT
36 GY28-6775
Control flow in sample program
37 GY28-6611
in TESTRAN
Control format item (format list)
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
Control handling module
in TSO COMMAND PROCESSOR VOLI-ADD 36 GY28-6771
Control information
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
Control information. MAIL directory
processing
in TSO COMMAND PROC VOLI-BROADCAST 36 GY28-6771
Control information fields
in TSO COMMAND PROCESSOR VOLI-CHNG 36 GY28-6771
Control information for channel program
generation
in BASIC TELECOMM. ACCESS METHOD
30 GY30-2001
channel command word (CCW)
device I/O directory
device I/O module
Control information processing
in LINKAGE EDITOR (F)
31 GY28-6667
description of
operation diagram
Control length allocation request
in PLII SUBROUTINE LIBRARY
29 GY28-6801
Control level tables (routines)
in LOADER
31 GY28-6714
Control module
in MACHINE-CHECK HANDLER. M135/145 30 GY27-7237
in PLII (F) COMPILER
29 GY28-6800
in PLII SYNTAX CHECKER PLM
29 GY33-8009
assembler macro IKMBASE
IKMOOx
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
Control module. ACCOUNT
in TSO COMMAND PROCESSOR VOLI-ACCT 36 GY28-6771
Control module. broadcast data set
in TSO COMMAND PROC VOLI-BROADCAST 36 GY28-6771
Control module. hierarchy
in TSO COMMAND PROC VOL6-WHEN/END 36 GY28-6776
Control module. IKJEFE11
in TSO COMMAND PROC VOL6-WHEN/END 36 GY28-6776
Control module (IEWLCTRL)
in LOADER
31 GY28-6714
flowchart of
synopsis of
Control module (IKJEES70)
in TSO COMMAND PROC VOL4-LISTBC
36 GY28-6774
description
diagrams
flowcharts

Control - Control
hierarchy
Control module (IKJEFD30)
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY28-6772
description
flowcharts
operation
service routines used
subroutines
Control module (IKJEFH01)
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
Control module (IKJEHDEL)
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
description
flowchart
operation
Control module (IKJEHRN2)
in TSO COMMAND PROC VOL6-RENAME
36 GY28-6776
flowchart
M.O. diagram
module description
Control module hierarchy
in TSO COMMAND PROC VOL6-PROTECT
36 GY28-6776
Control module hierarchy chart
in TSO COMMAND PROC VOL6-TERMINAL 36 GY28-6776
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
Control module-IGG019V4
in IBM 1419/1275 DEVICE DEP. BSAM 30 GY21-0012
CNTRL disengage-IGG019V4
CNTRL pocket light-IGG019V4
Control of logical flow
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
checking keyword statements
classification (IKM03)
entries to syntax checker:
normal. last. continuation
error handling (IKM12)
return to system interface
error message buffer full (return
code=8)
more input needed (return code=12)
terminating errors
translation (IKM02)
variants. checking differences
1. thorough
2.thorough
3.restricted checking
Control of workspace
in PL/I (F) COMPILER
29 GY28-6800
Control operations routine
in FORTRAN IV (E)
25 GY28-6601
defini tion of
in interface module
Control password
in TSO COMMAND PROC VOL6-PROTECT
36 GY28-6776
Control Phase
in ALGOL-T0-PLl1 LCP
29 GY33-7006
in COBOL-TO-PLll LCP
29 GY33-7007
in FORTRAN IV-TO-PLl1 LCP
29 GY33-7000
Control phase. overall logic
in FORTRAN IV-TO-PL/1 LCP
29 GY33-7000
Control print option
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
Control program
in ASSEMBLER (F)
21 GY26-3700
in PL/I (F) COMPILER
29 GY28-6800
Control program. type of
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
Control program interfaces
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Control program parameter list (CPPL)
in TSO COMMAND PROC VOL4-LISTBC
36 GY28-6774
Control program services
in ASSEMBLER (F)
21 GY26-3700
CHECK
CLOSE
DCB

C

Control - Control

Control program services
I in ASSEMBLER (F)
21 GY26-3700
L--------------------------------------(continued)
FIND
FREEMAIN
GET
GETMAIN
LINK
NOTE
OPEN
POINT
PUT
READ
RETURN
TCLOSE
WRITE
XCTL
Control record
in LINKAGE EDITOR (F)
31 GY28-6667
contents
format
in MVT SUPERVISOR
36 GY28-6659
format of
Control record (checkpoint)
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Control record format
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
Control register, hardware mode
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
Control register 14
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
Control register 15
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
Control registers
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
Control/RLD record
in LINKAGE EDITOR (F)
31 GY28-6667
Control/RLD record write routine
(WRTCRRLD)
in LINKAGE EDITOR (F)
31 GY28-6667
control routine
in JOB MANAGEMENT
36 GY28-6613
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
Control routine, Postprocessor
(IIOPOST2)
in 7074 EMULATE FOR M/165
GY27-7228
Control routine, Preprocessor
(IIOPRECS)
in 7074 EMULATE FOR M/165
GY27-7228
Control routine (IITCTL)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
description
detailed
general
flowchart
Control routine (IITPOST2)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
description
flowchart
Control routine (IITPRECS)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
description
flowchart
control Routine (IKACTL)
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
chart
description of
example of use in defining a
job
Control Routine (IKDCTL)
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
chart
description of
Control routine UKJEFA40)

88
in TSO COMMAND PROCESSOR VOLl-LIST 36 GY28-6771
Control routine (IKJEFF06)
in TSO COMMAND PROC VOL6-SUBMIT
36 GY28-6776
Control routines
in PL/I (F) COMPILER
29 GY28-6800
compiler
debugging
diagnostic messages
entry
initialization
input/output
input/output
program interruptions
storage allocation
storage dumping
table Of
ZUBW
ZURD
in SEQUENTIAL ACCESS METHODS
30 GY28-6604
BSAM (basic sequential access method)
macro-expansions (shared with QSAM)
modules loaded at execution
modules loaded at Open
QSAM (queued sequential access method)
macro expansions (shared with BSAM)
modules loaded at Open (shared with
BSAM)
Control section
in TSO COMMAND PROC VOL6-PROTECT
36 GY28- 6776
in TSO COMMAND PROC VOL6-RENAME
36 GY28-6776
directory of
IKJEHCIR
IKJEHDEF
IKJEHMSG
IKJEHREN
IKJEHRN2
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
Control section, in routine directory
in TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6775
Control section (CSECT)
in LINKAGE EDITOR (F)
31 GY28-6667
assigning addresses to
del inking of
grouping on SYSLMOD
replacement
Control section (CSECT) names
in TSO COMMAND PROC VOL6-PROFILE
36 GY28-6776
Control section relocation table
in TESTRAN
37 GY28-6611
Control section search routine (GETIDMUL)
in LINKAGE EDITOR (F)
31 GY28-6667
chart
in program organization
Control sections
in TSO COMMAND PROC VOL1-DELETE
36 GY28-6771
in TSO COMMAND PROC VOL2-DELETE
36 GY28- 6772
in TSO COMMAND PROC VOL5-LISTCAT
36 GY28-6775
names of
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-6771
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
in TSO COMMAND PROCESSOR VOL6-TlME 36 GY28-6776
Control sections, in directory
in TSO COMMAND PROC VOL6-WHEN/END 36 GY28-6776
Control sections, in IKJEES70
in TSO COMMAND PROC VOL4-LISTBC
36 GY28-6774
Control sections (CSECTS)
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771
Control sections (CSECTs), list of
in JOB MANAGEMENT
36 GY28-6613
Control statement
36 GY28-6613
in JOB MANAGEMENT
DD
DD, parameter dispositions
DD, JOBLIB
DD, STEPLIB

Control - Conversion

89
Control statement
I in JOB MANAGEMENT
36 GY28-6613
l--------------------------------------(continued)
EXEC
EXEC PROC
JOB
NULL
PEND
PROC
process ing of
reading
in LINKAGE EDlTOR (F)
31 GY28-6667
format
operands
operation diagram
pointers (P1,P2)
processing
work areas (OPD1,OPD2)
Control statement processing-IEBPTPCH
in UTILITIES
32 GY28-6614
Control statement scanner (IEWLMSCN)
in LINKAGE EDITOR (F)
31 GY28-6667
processing
charts
synopsis
Control storage malfunctions
in MACHINE-ChECK HANDLER, M135/145 30 GY27-7237
Control table
in TESTRAN
37 GY28-6611
in TSO COMMAND PROC VOL1-DELETE
36 GY28-6771
in TSO COMMAND PROC VOL6-SUBMIT
36 GY28-6776
built
fields
used
Control table-IEBCOPY
in UTILITIES
32 GY28-6614
Control tables
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
list of, for GFX
list of, for GJP
relationship of, for GFX
relationship of, for GJP
in PL/I (F) COMPILER
29 GY28-6800
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
list of, for GFX
list of, for system/360
relationship of, for GFX
list of, for 1130
Control task
in PLII SUBROUTINE LIBRARY
29 GY28-6801
format
lengths of areas
priority
save area
subroutines
workspace
Control task defined
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Control task ECB (CTECB)
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Control task storage area
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Control test routine
in S/360-1130 DATA TMN. - FORTRAN 25 GY27-7161
setting status code
indicators for
in system/360 (IKDGTCLT)
1130 system (GTCLT)
Control unit
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
Control variables in pseudo-code phase
in PL/I (F) COMPILER
29 GY28-6800
CONTROLLED (keyword attribute)
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
. attribute classification
:ONTROLLED attribute

in PL/I SUBROUTINE LIBRARY
CONTROLLED chain
in PL/I (F) COMPILER
scan
in structure processor
Controlled storage
in PL/I SUBROUTINE LIBRARY
Controlled storage (multitasking)
in PL/I SUBROUTINE LIBRARY
Controlled variable
in ALGOL-TO-PL/1 LCP
CONTROLLED variables, RDV
in PL/I (F) COMPILER
Controller
in S/360-1130 DATA TMN. - FORTRAN
establishing linkage to
residence of
description of
in TSO COMMAND PROCESSOR VOL3-EDIT
error and exceptional conditions
method of operation diagram
Controller (IIOCTRL)
in 7074 EMULATE FOR M/165
description
flowchart
function
MOD
Controlling the I/O device
in IBM 1419/1275 DEVICE DEP. BSAM

29 GY28-6801
29 GY28-6800

29 GY28-6801
29 GY28-6801
2<) GY33-7006
29 GY28-6800
25 GY27-7161

36 GY28-6773

GY27-7228

30 GY21-0012

CONV macro
----in PL/I (F) COMPILER

29 GY28-6800

CONV pseudo-code macro
in PL/I (F) COMPILER

29 GY28-6800

CONVAL
---rn-COBOL-TO-PL/1 LCP

29 GY33-7007

Conventions
in ALGOL (F) COMPILER
in PL/I SUBROUTINE LIBRARY
coding
naming
Conventions, for diagrams
in TSO COMMAND PROC VOL5-LISTDS
Conventions, symbolic
in TSO COMMAND PROC VOL5-LISTCAT
in TSO COMMAND PROC VOL6-PROTECT
in TSO COMMAND PROC VOL6-RENAME
in TSO COMMAND PROCESSOR VOL4-HELP
Conventions, symbols
in TSO COMMAND PROCESSOR VOL6-RUN
Conventions in MO diagrams
in TSO COMMAND PROCESSOR VOLI-CHNG
Conversational line block
in CRJE PLM
field descriptions
general description
map
microfiche directory
Conversational mode routine
in QUEUED TELECOMM. ACCESS METHOD
chart

26 GY33-8000
29 GY28-6801

36 GY28-6775
36
36
36
36

GY28-6775
GY28-6776
GY28-6776
GY28-6774

36 GY28-6776
36 GY28-6771
36 GY30-2011

30 GY30-2002

Conversion
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
in PL/I (F) COMPILER
29 GY28-6800
absolute addresses
constants to internal form
input characters
symbolic references
of built-in functions
of character codes
of constants
of precision data

IIH

Conversion - copy

90

Conversion
I in PL/I (F) COMPILER
29 GY28-6800
l--------------------------------------(continued)
of replication factors
to EBCDIC
to internal code
to triples
48 to 60 character symbols
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
functions
of internal arithmetic
mode
package structure
Conversion, data
in ONLINE TEST ~X~CUTIVE PROGRAM
37 GY28-6651
Conversion codes
in FORTRAN IV (~)
25 GY28-6601
CONVERSION error code
in PL/I SUBROU'I'INE LIBRARY
29 GY28-6801
Conversion handling
in PL/I SUBROU'I'INE LIBRARY
29 GY28-6801
Conversion of arguments
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Conversion of data
in S/360-1130 DATA TMN. - FORTRAN 25 GY27-7161
between arrays
general information about
in place
routines for
in TCAM ShRVICEABILITY AIDS
30 GY30-2027
Conversion routine (IEWLCNVT)
31 GY28-6714
in LOADER
synopsis of
Conversion routines
in FORTRAN IV (E)
25 GY28-6601
in IHOFCOME
Conversion subroutines
in COBOL (F)
24 GY28-6382
in FORTRAN IV (H) COMPILER
25 GY28-6642
Conversion to bit string
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Conversions, arithmetic
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Conversions, string
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
CONV~RT

in ONLINE TEST EXECUTIVE PROGRAM
Convert module (IKJEFF6L)
in TSO COMMAND PROC VOL5-0UTPUT
description
in operation
Convert module (IKJEGCVT)
in TSO COMMAND PROCESSOR VOL7-TEST
diagram of
flowcharts of
module description of
text description of
CONVERT pseudo-code macro
in PL/I (F) COMPILER
Convert Routine (SGCNV)
in s/360 JOB PROCESSING 1130/2250
chart
description of
Convert Service module
in TCAM SERVICEABILITY AIDS
entry
functions
CONVERT subroutine
in TSO COMMAND PROCESSOR VOL6-TIME
CONVERT TO ADR CONST routine
in FORTRAN IV (G) COMPILER
CONVERT TO INST FORMAT routine
in FORTRAN IV (G) COMPILER
Converting character codes
in TSO COMMAND PROCESSOR VOL7-TEST

37 GY28-6651
36 GY28-6775

36 GY28-6777

29 GY28-6800
36 GY27-7166

30 GY30-2027

36 GY28-6776
25 GY28-6638
25 GY28-6638
36 GY28-.6777

Converting coordinates
in GRAPHIC SUBRTN. PACKAGE
Converting real numbers to integer
in GRAPHIC SUBRTN. PACKAGE
Converting routines
in SEQUENTIAL ACCESS METHODS

30 GY28-6604

CON12
in COBOL

(E)

24 GY24-5009

CON4
in COBOL (E)

24 GY24-5009

CON6
--in COBOL (E)

24 GY24-5009

Coordina tes
in FORTRAN IV (H) COMPILER
aSSignment of

25 GY27-7152
25 GY27-7152

25 GY28-6642

COPCONEX, in history
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

COPRO
in FORTRAN IV-TO-PL/1 LCP

29 GY33-7000

COpy
in ASSEMBLER (F)
in COBOL-TO-PL/1 LCP
COPY-BASIS routine
in COBOL (F)
Copy buffer queue
in TELECOMMUNICATION ACCESS METHOD
Copy clear queue
in QUEUED TELECOMM. ACCESS METHOD
Copy clear subtask
in QUEUED TELECOMM. ACCESS METHOD
COPY control cards
in PL/I SUBROUTINE LIBRARY
COpy flag
in COBOL (F)
Copy function
in CRJE PLM
Copy held terminals routine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
COPY/INCLUDE preprocessor
in COBOL-TO-PL/1 LCP
Copy invitation list entry routine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
Copy invitation list status routine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module descript~on
register usage
Copy LCB information routine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description

21 GY26-3700
29 GY33-7007
24 GY28-6382
30 GY30-2029
30 GY30-2002
30 GY30-2002
29 GY28-6801
24 GY28-6382
36 GY30-2011
30 GY30-2029

29 GY33-7007
30 GY30-2029

30 GY30-2029

30 GY30-2029

Copy - COUNTER

91

copy LCB information routine
I in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
L--------------------------------------(continued)
register usage
Copy line information routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
Copy mode
in CRJE PLM
36 GY30-2011
Copy operator control terminal
routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
COpy option
in COBOL (F)
24 GY28-6382
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Copy pass
in SORT/MERGE
33 GY28-6597
copy polling list routine
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
chart
Copy QCB information routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
Copy queue control block routine
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
chart
Copy terminal information routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
Copy terminal table routine
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
chart
COPYCRD
in COBOL-TO-PL/1 LCP

29 GY33-7007

COPYIA
in ALGOL-TO-PL/1 LCP

29 GY33-7006

COPYIN routine
in COBOL (F)

24 GY28-6382

Copying a BSAM data set
in UTILITIES
32 GY28-6614
Copying a PDS-IEHMOVE
in UTILITIES
32 GY28-6614
Copying and modifying records-IEBGENER
327ff.
in UTILITIES
32 GY28-6614
COPYPL
in COBOL-TO-PL/1 LCP
CORAL
in FORTRAN IV (H) COMPILER

29 GY33-7007
25 GY28-6642

CORAL-IEKGCR
in FORTRAN IV (H) COMPILE.R

25 GY28-6642

CORD
in COBOL-TO-PL/1 LCP

29 GY33-7007

Core maps
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
Core requirements, algorithms
in TCAM SERVICEABILITY AIDS
30 GY30-2027Ii
Core search
in TSO COMAND PROC VOL2-CNCL/STATUS36 GY28-6772
routine
used
Correctable failure
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
Corrected errors
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
Correction of syntactical errors
in PL/I (F) COMPILER
Correlation values
in GRAPHIC SUBRTN. PACKAGE
passing to internal routines
storing by GSP
use in inserting a cursor
use in locating a key
use in resetting
verifying validity of

29 GY28-6800
25 GY27-7152

Correspondence defining
in PL/I (F) COMPILER

29 GY28-6800

CORRESPONDING option
in COBOL (F)

24 GY28-6382

CORRFLAG (correspondence defining)
in PL/I SYNTAX CHECKER PLM

29 GY33- 8009

CORRTN routine
(F)

24 GY28- 6382

-"IilCOBOL

Count, of constants
PL/I (F) COMPILER
29
Count field
in CATALOG MANAGEMENT
30
of physical blocks
of catalog entries
in INDEXED SEQUEN. ACCESS METHOD
30
in TSO CATALOG MANAGEMENT
36
of physical blocks
of catalog entries
Count field, segment
in TSO COMMAND PROCESSOR VOL4-EXEC 36
Count mode
in EMULATOR FOR 7090/7094/709411
35
DIL count
DIL9 processing
operation
in MACHINE-CHECK HANDLER, S360 M85 31
in MVT JOB MANAGEMENT
36
Count stack
in PL/I (F) COMPILER
29
Counter. location
in FORTRAN IV (E)
25
relative address assignment use of
in PL/I SUBROUTINE LIBRARY
29
Counter, resources in multitasking
in PL/I SUBROUTINE LIBRARY
29
COUNTER macro expansion linkage
in TELECOMMUNICATION ACCESS METHOD 30
COUNTER parameter list
in TELECOMMUNICATION ACCESS METHOD 30

--rn

GY28-6800
GY28-6606
GY28-6618
GY28-6745

GY28-6774
GY27-7187

GY27-7184
GY28-6660
GY28-6800
GY28-6601
GY28-6801
GY28-6801
GY30-2029
GY30-2029

92

Counter - CPPL
counter routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
Counters
in COBOL (F)
24 GY28-6382
BILCTR
BLCTR
BLLCTR
CKPcrR
DCBCTR
DECBCT
GNCTR
INDCTR
LOCcrR
LTLCTR
ODOCTR
ONCTL
ONCTR
PFMCTL-I
PFMCTR
PNCTR
PSVCTR
RGNCTR
SBLCTR
SELCTR
SEQERR
SMEcrR
SUBCTR
VIRCTR
VLCcrR
VNCTR
XSAcrR
XSWCTR
in TESTRAN
37 GY28-66ll
Counting Loop
in ALGOL (F) COMPILER
26 GY33-8000
cousins
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-677l
CP
in INDEXED SEQUEN. ACCESS METHOD
30 GY28-66l8
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
CPB
in TELECOMMUNICATION ACCESS METHOD
CPB cleanup
in TELECOMMUNICATION ACCESS METHOD
functions
CPB Cleanup QCB
in TELECOMMUNICATION ACCESS METHOD
CPB free pool queue
in TELECOMMUNICATION ACCESS METHOD
CPB initialization
in TELECOMMUNICATION ACCESS METHOD
CPB initialization disk only queuing
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
CPB initi'alization main storage only
queuing
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description

30 GY30-2029
30 GY30-2029
30 GY30-2029
30 GY30-2029
30 GY30-2029
30 GY30-2029

30 GY30-2029

register usage
CPB initialization routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
CPDLMSGT. field in COMMON
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
CPECB
in TSO COMMAND PROC VOL5-0PERATOR
data area
in data area directory
CPECBPTR.
in TSO
CPECBPTR.
in TSO

36 GY28-6775

field in EXITPARM
COMMAND PROC VOL5-0PERATOR 36 GY28-6775
in Parseint
COMAND PROC VOL2-CNCL/STATUS36 GY28-6772

CPLTST-IEKJCP

~FORTRAN IV (H) COMPILER

25 GY28-6642

CPOINT

~PL/I SYNTAX CHECKER PLM

29 GY33-8009

algorithm in TOKENTST and TOKTEST
pointer to current token
updated by NEXTOKEN (IKMll)
CPPL
in
in
in
in

TSO COMMAND PROC VOL4-LISTALC
36
TSO COMMAND PROC VOL4-LISTBC
36
TSO COMMAND PROC VOL5-LISTDS
36
TSO COMMAND PROC VOL5-0PERATOR 36
in directory
data area
pointer to
in TSO COMMAND PROC VOL5-0UTPUT
36
in TSO COMMAND PROC VOL6-PROFILE
36
in TSO COMMAND PROC VOL6-REN~~
36
in TSO COMMAND PROC VOL6-T£RMINAL 36
in TSO COMMAND PROC VOL6-WHEN/END 36
data area
in data area directory
in TSO COMMAND PROCESSOR VOLl-ADD 36
in TSO COMMAND PROCESSOR VOLl-CHNG 36
in TSO COMMAND PROCESSOR VOL4-EXEC 36
cross-references
data area
in TSO COMMAND PROCESSOR VOL4-FREE 36
in TSO COMMAND PROCESSOR VOL4-HELP 36
in TSO COMMAND PROCESSOR VOL6-RUN 36
in TSO TMP & SERVICE ROUTINES
36
CPPL (Command Processor Parameter List)
in TSO COMMAND PROC VOL2-ALLOCATE 36
description
operation
36
in TSO COMMAND PROC VOL2-DELETE
description
operation
in TSO COMMAND PROC VOL5-LISTCAT
36
description of
in TSO COMMAND PROC VOL6-PROTECT
36
in TSO COMMAND PROCESSOR VOLl-ACCT 36
fields in
function of
input to IKJEFAOO
size of
users of
in TSO COMMAND PROCESSOR VOL2-CALL 36
descri pti on
operation
used by

GY28-6774
GY28- 6774
GY28-6775
GY28- 6775

GY28-6775
GY28-6776
GY28-6776
GY28-6776
GY28-6776
GY28-6771
GY28-6771
GY28-6774
GY28-6774
GY28-6774
GY28-6776
GY28-6770
GY28-6772
GY28-6772
GY28-6775
GY28-6776
GY28-6771

GY28-6772

93

CPPL - CreatiDg

CPPL (Command Processor Parameter List)
L--------------------------------------(continued)
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
CPPLBUF
in TSO COMMAND PROC VOL6-WHEN/END
fi eld in CPPL

36 GY28-6776

CPPLCBUF
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
CPPLCBUF, field in CPPL
in TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6775

in TSO COMMAND PROC VOL4-LISTALC
36 GY28-6774
recording of
in TSO COMMAND PROC VOL6-PROTECT
36 GY28-6776
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
CPUTAB
---rn-INITIAL PROGRAM LOADER AND NIP

CPUxxxx fields in TIMESBUF
in TSO COMMAND PROCESSOR VOL6-TIME 36

CPPLPSCB
in TSO COMMAND PROC VOL6-WHEN/END
field in CPPL
CPPLPSCB, field in CPPL
in TSO COMMAND PROC VOL5-0PERATOR
CPPLPTR, field in EXITPARM
in TSO COMMAND PROC VOL5-0PERATOR
CPPLUPT
in TSO COMMAND PROC VOL6-WHEN/END
field in CPPL
CPPLUPT, field in CPPL
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6776
36 GY28-6775
36 GY28-6776
36 GY28-6775
36 GY28-6775

31 GY28-6714

CRA
in COBOL-TO-PL/1 LCP

29 GY33-7007

CRADEP
---rn-COBOL-TO-PL/1 LCP

29 GY33-7007

CRATL

---rn

GRAPHIC SUBRTN. PACKAGE

CRA1
---rn COBOL-TO-PL/1 LCP

25 GY27-7152
29 GY33-7007

CRCX

~n SORT/MERGE

33 GY28-6597

in parameter list
36 GY28-6776
36 GY28-6775

CPPLxxx, fields of CPPL
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
CPPLxxxx, field in CPPL
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
CPPLxxxx fields in CPPL
in i'SO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
CPTR
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
label
CPU
---in EMULATOR FOR 7090/7094/709411
emulation
type
in MACHINE-CHECK HANDLER, M135/145
malfunctions
retry
successful
in ONLINE TEST EXECUTIVE PROGRAM
in operation diagram discussion
in glossary
CPU (central processing unit)
in MACHINE-CHECK HANDLER, S360 M85
log or CPU environment
CPU Analysis
in MACHINE-CHECK HANDLER, s360 M65
module (IGFASROB)
theory
CPU emulation routines
in 7074 EMULATE FOR M/165
description
function
MOD
CPU logout
in MACHINE-CHECK HANDLER, M155/165
CPU retry
in MACHINE-CHECK HANDLER, M155/165
CPU status byte
in INITIAL PROGRAM LOADER AND NIP
CPU time
in TSO COMMAND PROC VOL2-DELETE

I

__
GY2~-677611L!

CR
in LOADER

CPPLECT
in TSO COMMAND PROC VOL6-WHEN/END
field in CPPL
CPPLECT, field in CPPL
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6661

35 GY27-7187
30 GY27-7237

37 GY28-6651

31 GY27-7184
31 GY27-7155

GY27-7228

30 GY27-7198
30 GY27-7198

CRDESD - Phase F7 read external symbol
dictionary
in ASSEMBLER (F)
21 GY26-3700
CREAD I macro
CRJE PLM
CREAD macro
in CRJE PLM
CREAD R macro
in CRJE PLM

---rn

36 GY30-2011
36 GY30-2011
36 GY3Q-2011

Create an error message routine and
subtask
in TELECOMMUNICATION ACCESS METHOD 30
cross reference table
flowchart
library
microfiche directory
module description
register usage
Create-BDAM (WRITE-load)
in SEQUENTIAL ACCESS METHODS
30
Check routine
stage 2 Open executors
Write (no track overflow) routines
Write (track overflow) routine
Create data area
in PL/I SYNTAX CHECKER PLM
29
at system start-up time
pointer to DATAAREA DSECT (register
subroutine INIT (IKMOOx)
Create extra storage
in PL/I SYNTAX CHECKER PLM
29
no storage available
return code=16 to system interface
subroutine CGM (IKMOOx)
Create function
in CRJE PLM
36
CREATE macro
in CRJE PLM
36
Create mode
in TSO COMMAND PROCESSOR VOLl-ADD 36

GY30-2029

GY28-6604

GY33-8009
12)
GY33-8009

GY30-2011
GY30-2011
GY28-6771

36 GY28-6661
36 GY28-6772

Creating a chain
in COBOL-TO-PL/1 LCP

29 GY33-7007

94

Creating - CSCB
Creating PARADICT
in COBOL-To-PL/l LCP
Creation date of a data set
in TSO COMMAND PROC VOL5-LISTDS
default used
for HISTORY processing
format conversion
Creation dates
in TSO COMMAND PROC VOL4-LISTALC
processing of
Creation of library
in PL/I SUBROUTINE LIBRARY
CREND
in COBOL-TO-PL/l LCP
Crisscross direct access
technique
in SORT/MERGE
block/deblock modules
DCB. lOB modules
read/write modules
sort/merge module organization
sort modules
Critical identifier
in ALGOL (F) COMPILER
Critical Identifier Table
in ALGOL (F) COMP ILER
Critical Program Breaks
in COBOL (F)
definition
Data IC-Text format
Procedure IC-Text format

29 GY33-7007
36 GY28-6775

36 GY28-6774
29 GY28-6801
29 GY33-7007

33 GY28-6597

26 GY33-8000
26 GY33-8000
24 GY28-6382

CRJE
---rn CRJE PLM
36 GY30-2011
assembly macros
CRJELINE
CRJETABL
CRJEUSER
closedown module
flowchart
microfiche directory
control table
field descriptions
general description
map
microfiche directory
dispatcher
generation
initialization module
stop module
SYSOUT queue
system library
BRDCST
JBTBLS
SYSMSGS
USERS
USRMSGS
system library initialization utility
system structure
tasks
loader/controller
main
open
utility
CRJE (Conversational Remote Job Entry)
in FORTRAN IV SYNTAX CHECKER PLM
25 GY28-6831
interface with syntax checker
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
embedded component of (syntax checker)
interface
debugging hints for
return codes from syntax checker

multiprogramming environment
terminal operations
CRJE.SYSLIB
in CRJE PLM

36 GY30-2011

Cross-partition data movement
in TELECOMMUNICATION ACCESS METHOD 30
Cross partition move routine
in QUEUED TELECOMM. ACCESS METHOD 30
chart
Cross reference
in FORTRAN IV (H) COMPILER
25
Cross reference, modules
in TSO COMMAND PROCESSOR VOLI-ACCT 36
Cross-reference between control
sections
in LINKAGE EDITOR (F)
31
Cross-reference list
in ASSEMBLER (F)
21
Cross reference routine directory
in TSO COMMAND PROCESSOR VOLI-ADD 36
Cross-reference table
in LINKAGE EDITOR (F)
31
contents
detailed description of production
general description of
production
in program organization
production during final processing
table used in the production of
in TCAM SERVICEABILITY AIDS
30
in TELECOMMUNICATION ACCESS METHOD 30
Cross reference table between TCAM
modules
in TELECOMMUNICATION ACCESS METHOD 30
Cross references
in TSO COMMAND PROC VOL4-LISTBC
36
method used
occurrences of
on diagram
in TSO COMMAND PROCESSOR VOL4-EXEC 36
Cross-referencing in MO diagrams
in TSO COMMAND PROCESSOR VOL1-CHNG 36
CRRNT CHAR CNT variable
IV (G) COMPILER
definition
description
in Parse
CRRNT CHAR variaole
in FORTRAN IV (G) COMPILER
definition
description
in Parse

---rn FORTRAN

CSCB
---rn
in
in
in

GY30-2029
GY30-2002
GY28-6642
GY28-6771
GY28-6667
GY26-3700
GY28-6771
GY28-6667

GY30-2027
GY30-2029
GY30-2029
GY28-6774

GY28-6774
GY28-6771

25 GY28-6638

25 GY28-6638

36
CONTROL PROGRAM WITH MFT
36
CRJE PLM
36
JOB MANAGEMENT
TSO COMAND PROC VOL2-CNCL/STATUS36
in FIB facility
in IKJEFF51
in introduction
in operation
CSCB, pointer to
·in TSO COMMAND PROC VOL5-0PERATOR 36
CSCB (Command Scheduling
Control Block)
in S/360 JOB PROCESSING 1130/2250 36
definition of
testing ECB in
CSCB chain, and FIB facility
in TSO COMMAND PROC VOL6-SUBMIT
36
CSCB updating
in MVT JOB MANAGEMENT
36

GY27-7128
GY30-2011
GY28-6613
GY28-6772

GY28-6775
GY27-7166

GY28-6776
GY28-6660

95
CSD
in ASSEMBLER (F)
CSECT
---rn
ASSEMBLER

21 GY26-3700

(F)
21
in JOB MANAGEMENT
36
in LINKAGE EDITOR (F)
31
in TESTRAN
37
in TSO COMMAND PROC VOL6-PROTECT
36
IKJEHMSG
IKJEHPCD
IKJEHPRD
IKJEHPWP
IKJEHSMG
Csect name module listing
in TELECOMMUNICATION ACCESS METHOD 30
CSECT names
in TSO COMMAND PROC VOL5-LISTDS
36
in TSO COMMAND PROC VOL6-PROFILE
36
in TSO COMMAND PROC VOL6-RENAME
36
in TSO COMMAND PROCESSOR VOL7-TEST 36
cross reference list of
resolving
CSECT names (in routine directory)
in TSO COMMAND PROC VOL5-LISTCAT
36
CSECT names for syntax checker
in PL/I SYNTAX CHECKER PLM
29
CSECT names of routines
in CATALOG MANAGEMENT
30
in TSO CATALOG MANAGEMENT
36
CSECT routines
in TSO COMMAND PROCESSOR VOL4-HELP 36
CSECTB
---rn-ASSEMBLER (F)
21
CSECTPTR. in MSGPARM
in TSO COMAND PROC VOL2-CNCL/STATUS36
CSECTS
---rn-TSO COMMAND PROC VOL2-DELETE
36
CSECTs (control sections)
in TSO COMMAND PROCESSOR VOL1-LIST 36
CSECTS control sections
in TSO COMMAND PROCESSOR VOL4-EXEC 36

GY26-3700
GY28-6613
GY28-6667
GY28-6611
GY28-6776

GY30-2029
GY28-6775
GY28-6776
GY28-6776
GY28-6777

CSOANOC. field in CSOA
in TSO COMMAND PROC VOLS-OPERATOR

36 GY28-6775

CSOAQM. field in CSOA
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

CSOAVWP. field in CSOA
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

CSOLCOA. field in CSPL
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

CSOLUPT. field in CSPL
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

CSORN-IEKCCR

IV (H) COMPILER

25 GY28-6642

in XREF

GY28-6775
GY33-8009
GY28-6606
GY28-6745
GY28-6774
GY26-3700
GY28-6772
GY28-6772
GY28-6771
GY28-6774

CSM-ROUT routine
---in COBOL (F)

24 GY28-6382

CSOA
---rn TSO COMMAND PROC VOL5-0PERATOR
data area
in data area directory
in TSO COMMAND PROCESSOR VOL4-EXEC
cross references
data area
in TSO TMP & SERVICE ROUTINES
CSOA (command scan output area)
in TSO COMMAND PROCESSOR VOL1-ACCT
defined in IKJEFAOO
fields in
filled in by command
routine
size of

36 GY28-6775

--rn FORTRAN

29 GY33-7000

CSNU
----rn FORTRAN IV-TO-PL/l LCP

CSOALNM. field in CSOA
in TSO COMMAND PROC VOL5-0PERATOR

CSOAxxx fields in CSOA
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774

CSHL
---rn FORTRAN IV-TO-PL/l LCP

CSNA
in FORTRAN IV-TO-PL/l LCP

CSD - CSW

CSPCHK subroutine
SUPERVISOR

---rn-MVT

CSPL
----in TSO COMMAND PROC VOL5-0PERATOR
data area
in data area directory
in TSO COMMAND PROCESSOR VOL4-EXEC
cross references
data area
in TSO TMP & SERVICE ROUTINES
CSPL (command scan parameter list)
in TSO COMMAND PROCESSOR VOLl-ACCT
fields in
initialization of
input to IKJSCAN
size of
CSPLARM
in TSO TMP & SERVICE ROUTINES
format
use by Default service routine
CSPLCBUF. field in CSPL
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6659
36 GY28-6775
36 GY28-6774
36 GY28-6770
36 GY28-6771

36 GY28-6770

36 GY28-6775

29 GY33-7000
29 GY33-7000
36 GY28-6775
36 GY28-6774

CSPLECT. field in
in TSO COMMAND
CSPLECT. field in
in TSO COMMAND

CSPL
PROC VOL5-0PERATOR
CSPL
PROC VOL5-0PERATOR

36 GY28-6775

CSPLFLG. field in CSPL
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

36 GY28-6775

CSPLxxxx fields in CSPL
in Tsb COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774

36 GY28-6770
36 GY28-6771

CSOABAD,. field in CSOA
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

CSOACNM,. field in CSOA
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

in EMULATOR FOR 7090/7094/709411
CST (channel status table)
in 7074 EMULATE FOR M/165
CSW (channe-l status word)
---in INPUT/OUTPUT SUPERVISOR
in data area directory
data area layout
defined in glossary
in text
described in module directory
diagram of
permanent storage location

35 GY27-7187
GY27-7228
30 GY28-6616

Ii

96

CSW - CURRENT.TYPEITEM

CSW (channel status word)
I in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
L--------------------------------------(continued)
status information stored
used for error recovery (diagram)'

Cumulative CPU time
in TSO COMMAND PROC VOL5-0PERATOR

CTAB (LIST Control Table)
---rn TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771
format
use

CURGCN
---rn-COBOL (F)

24 GY28-6382

CURKEY
---rn-ALGOL-TO-PL/1 LCP

29 GY33-7006

CURLEVEL
in COBOL-TO-PL/1 LCP

29 GY33-7007

CTB-ROUT routine
--in COBOL (F)
CTECB (control task ECB)
PL/I SUBROUTINE LIBRARY

29 GY28-6801

CTF-ROUT routine
--in COBOL (F)

24 GY28-6382

CTFIELD
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
CTFLDDL
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
CTFLDID
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
CTFLDKEY
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
CTH-ROUT routine
--in COBOL (F)

24 GY28-6382

CTL.CHR
in COBOL (F)

24 GY28-6382

CTL.LVL
in COBOL (F)

24 GY28-6382

CTLAREA (Control Area)
in COBOL-To-PL/1 LCP

29 GY33-7007

CTLASA (ENVIRONMENT option)
in PL/I SYNl'AX CHECKER PLM

29 GY33-8009

CTLG parameter
in CATALOG MANAGEMENT
in TSO CATALOG MANAGEMENT

30 GY28-6606
36 GY28-6745

CTL360 (ENVIRONMENT option)
in PL/I SYNTAX CHECKER PLM
CTPRO
in FORTRAN IV-TO-PL/1 LCP

32 GY28-6614
32 GY28-6614
29 GY33-8009
29 GY33-7000

CTRLCHAR, internal subroutine
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
CTRLTAB
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
data area
in directory
CTSDNBRADR
in COBOL-To-PL/1 LCP
CTSDNBRREC
in COBOL-To-PL/1 LCP

CUR
in COBOL-TO-PL/1 LCP

29 GY33-7007

24 GY28-6382

--rn

CTLTAB entry construction
in UTILITIES
CTLTAB table sorting
in UTILITIES

36 GY28-6775

29 GY33-7007

29 GY33-7007

CURRENT
in COBOL-TO-PL/1 LCP
29
Current base address, in register
assignment
in FORTRAN IV (H) COMPILER
25
Current data mode
in GRAPHIC SUBRTN. PACKAGE
25
Current file
in PL/I SUBROUTINE LIBRARY
29
address
function references
stacking
Current file dump index
in PL/I SUBROUTINE LIBRARY
29
Current history, use of
in TSO COMMAND PROC VOL6-SUBMIT
36
Current line
in TSO COMMAND PROCESSOR VOL3-EDIT 36
definition
Current line pointer
in TSO COMMAND PROCESSOR VOL3-EDIT 36
definition
updating of
use of
Current LWS address
in PL/I SUBROUTINE LIBRARY
29
Current message
in FORTRAN IV SYNTAX CHECKER PLM
25
defini tion of
effect of nesting on
Current name
in TSO COMMAND PROC VOL1-DELETE
36
Current name PDE, pointer to
in TSO COMMAND PROC VOL1-DELETE
36
Current procedure
in TSO COMMAND PROC VOL6-WHEN/END 36
Current processing
in TSO COMMAND PROCESSOR VOL4-HELP 36
block of records
UPT
protected step control block (PSCB)
Current record
in TSO COMMAND PROCESSOR VOL3-EDIT 36
definition
Current statement
in TSO COMMAND PROC VOL6-SUBMIT
36
input
processing
Current user profile table, pointer to
in TSO COMMAND PROC VOL1-DELETE
36
CURRENT. ITEM
in COBOL-TO-PL/1 LCP
29
CURRENl'.LEVELNUMBER
in COBOL-TO-PL/1 LCP
29
CURRENT.OCCURSDEP
in COBOL-TO-PL/1 LCP
29
CURRENl'.REDEFINE
in COBOL-TO-PL/1 LCP
29
CURRENT. TYPEITEM
in COBOL-TO-PL/1 LCP
29

GY33-7007
GY28-6642
GY27-7152
GY28-6801

GY28-6801
GY28-6776
GY28-6773
GY28-6773

GY28-6801
GY28-6831

GY28-6771
GY28-6771
GY28-6776
GY28-6774

GY28-6773
GY28-6776

GY28-6771
GY33-7007
GY33-7007
GY33-7007
GY33-7007
GY33-7007

97
CURRENT. TYPEI'EM
in COBOL-TO-PL/1
CURRENT. VALID
in COBOL-To-PL/1
CURRENT. VALUE
in COBOL-TO-PL/1
CURRENT INDEX
in COBOL-TO-PL/1

LCP

29 GY33-7007

LCP

29 GY33-7007

LCP

29 GY33-7007

LCP

29 GY33-7007

CURRENT. TYPETEM -

in TSO CATALOG MANAGEMENT
CVT (Communications Vector Table)
in MACHINE-CHECK HANDLER, M155/165
used for machine status
used for subsystem analysis
in S/360 JOB PROCESSING 1130/2250
in TSO COMMAND PROCESSOR VOL6-SEND

DACLS

36 GY28-6745
30 GY27-7198
36 GY27-7166
36 GY28-6776

CVTMDL field

CURRJCL
in TSO COMMAND PROC VOL6-SUBMIT
in history
in processing
use
Cursor
---rn-GRAPHIC JOB PROCESSOR SUPPORT
manipulation of
positioning the
Cursor subroutines
in GRAPHIC SUBRTN. PACKAGE
CURUSAGE
in COBOL-TO-PL/1 LCP
CUTOFF macro expansion linkage
in TELECOMMUNICATION ACCESS MEI'HOD
Cutoff message transmission routine
and subtask
in TELECOMMUNICATION ACCESS MEI'HOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
CUTOFF parameter list
in TELECOMMUNICATION ACCESS METHOD
Cutoff QCB
in TELECOMMUNICATION ACCESS MEI'HOD

~ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

36 GY28-6776
CWRESD - ~nase F7 write external symbol
dictionary
in ASSEMBLER (F)
21 GY26-3700
CWRITE macro

36 GY27-7159

25 GY27-7152
29 GY33-7007
30 GY30-2029
30 GY30-2029

~CRJE PLM

36 GY30-2011

CWRITE R macro
in CRJE PLM

36 GY30-2011

CWT (channel command trap)
in EMULATOR FOR 7090/7094/709411

35 GY27-7187

CXD

--in ASSEMBLER (F)

21 GY26-3700

CXIMAG- IEKRCI
---rn-FORTRAN IV (H) COMPILER

25 GY28-6642

Cycle (data generation)
in GRAPHIC SUBRTN. PACKAGE

25 GY27-7152

Cyclical address increment
in ALGOL (F) COMPILER

26 GY33-8000

PROC VOL6-SUBMIT

36 GY28-6776

CVERBCOP, in history
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

CVIRPTR table
in COBOL (F)

24 GY28-6382

Cylinder index
in INDEXED SEQUEN. ACCESS METHOD
30 GY28-6618
BISAM processing
definition
direct access extents
format
load mode processing
Cylinder overflow area
in INDEXED SEQUEN. ACCESS METHOD
30 GY28-6618
Cylinder overflow control record (COCR)
in INDEXED SEQUEN. ACCESS METHOD
30 GY28-6618
definition
BISAM processing
format

CVIRTB table
in COBOL (F)

24 GY28-6382

---rn

C1520-IEKJA2
FORTRAN IV (H) COMPILER

25 GY28-6642

C48TST (48-character set test)
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

CVERB, in history
---rn
TSO COMMAND

30 GY30-2029
30 GY30-2029

CVOL (control volume)
---rn CATALOG MANAGEMENT
30 GY28-6606
description
old pointer entry
pointer entry
routines
in TSO CATALOG MANAGEMENT
36 ~Y28-6745
description
old pointer entry
pointer entry
routines
CVOL routine
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
in CATALOG MANAGEMENT
30
in CRjE PLM
36
in JOB MANAGEMENT
36
in MVT SUPERVISOR
36
in ONLINE TEST EXECUTIVE PROGRAM
37
.in glossary
in TSO COMAND PROC VOL2-CNCL/STATUS36
CVT (communication vector table)

GY28-6606
GY30-2011
GY28-6613
GY28-6659
GY28-6651
GY28-6772

iii
Q -

in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
D-format code
in FORTRAN IV-TO-PL/1 LCP
29 GY33-7000
D operator
in FORTRAN IV SYNTAX CHECKER PLM
25 GY28-6831
DABS in-line function
---rn FORTRAN IV (E)
compile-time processing of

25 GY28-6601

DACCxxx, field in DPLB
in TSO COMMAND PROC VOLI-DELETE

36 GY28-6771

DACLS, field in DPLB
COMMAND PROC VOLl-DELETE

36 GY28-6771

---rn TSO

Ii

Ii

98

DAC2xxx - DAXRXNXT

DAC2xxx, fields of DAPB2C
in TSO COMMAND PROC VOL5-LISTDS

36 GY28-6775

DADP, field in DPLB
in TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

DADSM

---rn

DIRECT ACCESS DEVICE SPACE MGT.
functions
routines
table (Extent table)
in MVT JOB MANAGEMENT
error return from
use of
DADSM (direct access device space
management)
in INTRO. TO CONTROL PROGRAM LOGIC
function of
use of
DADSM error recovery routine
in JOB MANAGEMENT
DADSM interrupt recording facility
in DIRECT ACCESS DEVICE SPACE MGT.
DADSM routines
in CATALOG MANAGEMENT
in TSO CATALOG MANAGEMENT

30 GY28-6607

30 GY2S-6606
36 GY28-6745

DAFLOC, field in DPLB
~TSO COMMAND PROC VOL1-DELETE

36 GY2S-6771

36 GY2S-6660

36 GY28-6605

36 GY2S-6613
30 GY2S-6607

DAIR
in TSO COMMAND PROC VOL4-LISTBC
36 GY28-6774
in TSO COMMAND PROC VOL5-LISTCAT
36 GY2S-6775
36 GY28-6776
in TSO COMMAND PROC VOL6-RENAME
36 GY2S-6776
in TSO COMMAND PROC VOL6-SUBMIT
input processing
output processing
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
DAIR, return codes from
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY2S-6772
DAIR (dynamic allocation entry routine)
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
entry code
failure messages
flags for
retain codes
DAIR (dynamic allocation interface routine)
in TSO COMMAND PROC VOL1-BROADCAST 36 GY2S-6771
definition
entry code for
failure routine for
parameter block for
parameter list for
36 GY28-6774
in TSO COMMAND PROC VOL4-LISTALC
in TSO COMMAND PROC VOL6-PROFILE
36 GY28-6776
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
DAIR (IKJDAIR)
36 GY28-6775
in TSO COMMAND PROC VOL5-0UTPUT
DAIR (IKJDAIR) -- Dynamic Allocation
Interface service routine
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description of
DAIR (IKJDAIR) in operation
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY2S-6776
DAIR error handling routine (IKJEFF18)
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY2S-6774
use of
DAIR error message routine
(IKJEFF18)
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
DAIR failure diagnose
in TSO COMMAND PROC VOL6-SUBMIT
36 GY28-6776

operation
routine
DAIR failure message routine
in TSO COMMAND PROCESSOR VOL6-SEND 36
description
in operation
messages
DAIR failure message routine (IKJEFF1S)
in TSO COMMAND PROC VOL2-ALLOCATE 36
messages
operation
DAIR output interface routine (IKJEFF15)
in TSO COMMAND PROC VOL6-SUBMIT
36
DAIR parameter block, description of
in TSO COMMAND PROC VOL1-BROADCAST 36
DAIR Parameter Block (DAPB)
in TSO TMP & SERVICE ROUTINES
36
format
code x'OO'
code X'04'
code X'OS'
code X'OC'
code X'10'
code X'14'
code X'1S'
code X'1C'
code X'24'
code X' 2S'
code X'2C'
code X'30'
use
DAIR parameter block (DAPB08)
in TSO COMMAND PROC VOL4-LISTBC
36
contains X'OOOS' entry code
specifies data set allocation
in TSO COMMAND PROC VOL5-0UTPUT
36
DAIR parameter blocks
in TSO COMMAND PROC VOL2-ALLOCATE 36
in TSO COMMAND PROC VOL2-DELETE
36
DAPB08, for allocation
DAPB18, for unallocation
DAPL
in TSO COMMAND PROC VOL5-LISTCAT
36
descriptions of
DAIR parameter list (DAPL)
in TSO COMMAND PROC VOL4-LISTBC
36
contents
created by LISTBC
36
in TSO TMP & SERVICE ROUTINES
format
use
DAIR parameters
in TSO COMMAND PROCESSOR VOL4-HELP 36
DAIR return codes
in TSO COMMAND PROC VOL2-DELETE
36
DAIR service routine
in TSO COMMAND PROC VOL2-ALLOCATE 36
entry codes
function
operation
in TSO TMP & SERVICE ROUTINES
36
DAIR Work Area (DAIRWA)
in TSO TMP & SERVICE ROUTINES
36
format
use
DAIRCODE, and output processing
in TSO COMMAND PROC VOL6-SUBMIT

GY28-6776

GY28-6772

GY28-6776
GY28-6771
GY28-6770

GY2S-6774
GY28-6775
GY28-6772
GY28-6772

GY28-6775
GY28-6774
GY28-6770

GY28-6774
GY28-6772
GY28-6772

GY28-6770
GY28-6770

36 GY28-6776

DAIRINIT. label
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
DAIRINIT routine
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
entry pOint
operation of

99

DAIRLINK subroutine
in TSO COMMAND PROC VOL2-ALLOCATE
flowchart
function
DAIRPARM
in TSO
DAIRPARM,
in TSO
DAIRPARM,
in TSO

36 GY2S-6772

DAIRRETC (parameter for IKJEFF1S)
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY2S-6776

DAIROS, and input OS
in TSO COMMAND PROC VOL6-SUBMIT
DAIROS, data area
in TSO COMMAND PROC VOL2-DELETE

36 GY2S-6776
36 GY2S-6776

36 GY2S-6776
36 GY2S-6772

DAIR1S, data area
in TSO COMMAND PROC VOL2-DELETE
36 GY2S-6772
DAIR1S parameter list (DAPB1S)
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY2S-6774
DAIR2S, and allocation
in TSO COMMAND PROC VOL6-SUBMIT

36 GY2S-6776

DAKEYFLG, field in PARSMACS
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY2S-677l
DAKEYPCE, field in PARSMACS
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY2S-677l
Damage assessment
in MACHINE-CHECK HANDLER, M135/l45
field buffer area
in MFT SUPERVISOR
modules
recursion
Damage Assessment Routines (DAR)
in MVT SUPERVISOR
ABEND2 routine with
description of
flowchart of
ABTERM routine with (flowchart)
DARl routine
description of
flowchart of
DAR2 routine
description of
flowchart of
DAR3 routine
description of
flowchart of
TCB field for (TCBDAR)
Damage report (hard machine-check
interruption)
in MACHINE-CHECK HANDLER, Ml35/l45

DAPB18

DANAMLNG, field in PARSMACS
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY2S-6771
DANAMPCE, field in PARSMACS
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY2S-6771

COMMAND PROCESSOR VOL4-FREE 36 GY2S-6774
data area
COMMAND PROC VOL2-DELETE
36 GY2S-6772
pointer to
COMMAND PROCESSOR VOL2-CALL 36 GY2S-6772

DAIRSTOR, field in WORKAREA
in TSO COMMAND PROCESSOR VOL6-RUN
DAIRSTOR, IKJDAIR parameter list
in TSO COMMAND PROCESSOR VOL6-RUN
format of
in flowchart

DAIRLINK -

30 GY27-7237
36 GY27-7236

36 GY2S-6659

DANAMSUB, field in PARSMACS
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY2S-677l
DAOFxxx, field in DPLB
in TSO COMMAND PROC VOL1-DELETE

36 GY2S-677l ~

DAPB, pointer to
in TSO COMMAND PROC VOL5-0PERATOR 36 GY2S-6775
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY2S-6772
DAPB04
---rn-TSO COMMAND PROC VOL5-0UTPUT
DAPB04 data area
in TSO COMMAND PROCESSOR VOL6-RUN
format of

36 GY2S-6775
36 GY2S-6776

DAPBOS
---rn-TSO COMMAND PROC VOL4-LISTBC
36 GY2S-6774
in TSO COMMAND PROC VOL5-0UTPUT
36 GY2S-6775
in TSO COMMAND PROC VOL6-RENAME
36 GY2S-6776
construction by IKJEHREN
flowchart
format
M.O. diagram
use by IKJDAIR
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY2S-6774
cross references
data area
DAPBOS (DAIR parameter block)
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY2S-6772
description
operation
in TSO COMMAND PROC VOL2-DELETE
36 GY2S-6772
description
operation
DAPBOS (dynamic allocation information
block)
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY2S-6772
description
operation
used
DAPBOS (dynamic allocation parameter block)
in TSO COMMAND PROC VOL1-BROADCAST 36 GY2S-677l
construction of
extracting ddname from
fields in
input to IKJDAIR
size of
testing return codes in
usage of subfields
DAPBOS (IKJDAIR parameter block for
allocation)
in TSO COMMAND PROC VOL5-LISTCAT
36 GY2S-6775
DAPBOS (IKJDAIR parameter block)
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY2S-6776
DAPBOS data area
in TSO COMMAND PROC VOL5-LISTDS
36 GY2S-6775
format
in data area directory

30 GY27-7237

DANAME, field in PARSMACS
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY2S-677l
DANAMELIN.. field in PARSMACS
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY2S-677l
DANAMFLG, field in PARSMACS
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY2S-677l

DAPB1C CLAR
----rIlALGOL-TO-PL/1 LCP

36 GY28-6613
25 GX28-6638
26 GY33- 8000
33 GY:l8-6597

30 GY28-6604
29 GY33-7006
24 GY28-6382
25 GY28-6601
25 GY28-6638
25 GY28- 6642
29 GY33-7006

Declarations
in ALGOL (F) COMPILER
26 GY33-BOOO
entry in Identifier Table
representation in intermediate source
text
allocation of object time storage fields
internal names of declared identifiers
replacement of identifiers by internal
names
Declarative Section
in COBOL (F)
Declarative statement
in FORTRAN IV-TO-PL/1 LCP
Declarative statements
in FORTRAN IV (E)
definition of
intermediate text for
Declarator
in ALGOL (F) COMPILER
in ALGOL-TO-PL/1 LCP

24 GY28- 6382
29 GY33-7000
25 GY2B-6601

26 GY33-BOOO
29 GY33-7006

DECLARE (keyword statement)
in PL/I SYNTAX CHECKER PLM
29
attributes
BASED
factoring of
in structures
OFFSET
preliminary checking of (ATTEST)
checking
declaration
level number
subroutine DECLARE UKM23)
DECLARE chain
in PL/I (F) COMPILER
29
DECLARE control block
in PL/I (F) COMPILER
29
Declare control block, format
in PL/I SUBROUTINE LIBRARY
29
Declare control block (DCLCB)
in PL/I SUBROUTINE LIBRARY
29
DECLARE statement
in FORTRAN IV-TO-PL/1 LCP
29

GY33-8009

GY28-6800
GY28-6BOO
GY2B-6B01
GY28-6B01
GY33-7000

114

Decode - Deferring
Decode Channel Address routine
(DECDCHNL)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
Decode Unit Address routine (DECDUNI~)
in EMULATOR FOR 7090/7094/709411
35 G¥27-7187
description
flowchart
Decoder routines
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
Decoding
in ONLINE TEST EXECUTIVE PROGRAM
device information
option information
test information
table, option,
in operation diagram
the input buffer
the test definition
Decoding tape instructions
in 7074 EMULATE FOR M/165

37 GY28-6651

GY27-7228

Decomposition routine using table (Phase
F8)
in ASSEMBLER (F)
21 GY26-3700
DECSUP routine
--rn-COBOL (F)

24 GY28-6382

DECxxxxx fields in E01DATDF
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
DED
in PL/I (F) COMPILER
in PL/I SUBROUTINE LIBRARY
creation
flag byte
DED (Data Element Descriptor) usage
in PL/I SUBROUTINE LIBRARY
DED discussion
in PL/I SUBROUTINE LIBRARY
DED field definition
in PL/I SUBROUTINE LIBRARY

29 GY28-6800
29 GY28-6801

29 GY28-6801
29 GY28-6801
29 GY28-6801

Dedicated data sets
in MVT JOB MANAGEMENT

36 GY28-6660

Dedication determination routine
in MVT JOB MANAGEMEN'I

36 GY28-6660

DEF
in COBOL (E)
in CRJE PLM
DEF symbol
in FORTRAN IV SYNTAX CHECKER PLM

24 GY24-5009
36 GY30-2011
25 GY28-6831

Default jobname list
in TSO COMAND PROC VOL2-CNCL/STATUs36
in IKJEFF50
in operation
Default options
in ONLINE TEST EXECUTIVE PROGRAM
37
in TSO COMMAND PROC VOL6-PROFILE
36
Default parameter block (DFPB)
in TSO COMMAND PROC VOLS-LISTDS
36
format
in data area directory
in TSO COMMAND PROC VOL6-RENAME
36
construction by IKJEHREN
flowchart
format
M.O. diagram
pointed to by DFPL
use by IKJEHDEF

GY28-6772

GY28-6651
GY28-6776
GY28-6775
GY28-6776

Default parameter list (DFPL)
in TSO COMMAND PROC VOL5-0UTPUT
36
description
in IKJEFF6lil
Default parameters
in GRAPHIC JOB PROCESSOR SUPPORT
36
Default rules, in dictionary entries
in PL/I (F) COMPILER
29
Default service routine
in TSO TMP t SERVICE ROUTINES
36
control codes
description
entry codes
hierarchy
messages
operation
parameters
register usage
return codes
DEFAULT service routine
in TSO COMMAND PROC VOL6-PROTECT
36
Default service routine (IKEHDEF)
in TSO COMMAND PROC VOL2-DELETE
36
description
operation
Default service routine (IKJEHDEF)
in TSO COMMAND PROC VOL6-RENAME
36
flowchart
M.O. diagram
module description
Default service routine parameter list
(DFPL)
in TSO COMMAND PROC VOL5-LISTDS
36
format
in data area directory
Default SYSOUT classes
in TSO COMMAND PROC VOL5-0UTPUT
36
Default values
in FORTRAN IV (E)
25
for compiler options
object-time insertion of into DCB
skeletons
system generation specification of
in TSO COMMAND PROC VOL4-LISTBC
36
in TSO COMMAND PROCESSOR VOL4-EXEC 36
in UTILITIES
32
IEBDG field definition (FD)
Default values-IEBDG
in UTILITIES
32
Defective track-IBCDASDI
in UTILITIES

GY28-6775

GY27-7159
GY28-6800
GY28-6770

GY28-6776
GY28-6772

GY28-6776

GY28-6775

GY28-677S
GY28-6601

GY28-6774
GY28-6774
GY28-6614
GY28-6614

32 GY28- 6614

Def'7r break element (DBE)
1n TSO COMMAND PROCESSOR VOL7-TEST 36
format of
Defer element queue
in TSO COMMAND PROCESSOR VOL7-TEST 36
description of
Defer entry subroutine
in QUEUED TELECOMM. ACCESS METHOD 30
Defer module element (DME)
in TSO COMMAND PROCESSOR VOL7-TEST 36
format of
Deferred breakpoints
in TSO COMMAND PROCESSOR VOL7-TEST 36
activating
setting
Deferred mounting
in INPUT/OUTPUT SUPPORT
30
Open routine
Deferring a request for a transient SVC
routine
in MVT SUPERVISOR
36
Deferring the request for an unavailable
module

GY28-6777
GY28-6777
GY30-2002
GY28-6777
GY28-6777

GY28-6609

GY28-66SQ

Deferring - DELErE

115
Deferring the request for an unavailable
I module
L--------------------------------------(continued)
in MVT SUPERVISOR
36 GY28-6659
DEFERTAB (field in test communication
table)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description of
DEFINE command processing
in CONTROL PROGRAM WITH MFT
by the master scheduler resident
processor
by SVC 34
flowchart
DEFINE FILE
in FORTRAN IV (H) COMPILER
statement
phase 10
format
text
DEFINE FILE statement
in FORTRAN IV (E)
compile-time processing
of
object-time processing of
DEFINED (keyword attribute)
in PL/I SYNTAX CHECKER PLM
checking
subroutine DEFINED (IKM136)
subscript-list not allowed
POSITION attribute
scalar
DEFINED chain, scan
in PL/I (F) COMPILER
DEFINED chain check
in PL/I (F) COMPILER
DEFINED data
in PL/I (F) COMPILER
DEFINED items, in aggregates phase
in PL/I (F) COMPILER
Defined references
in PL/I (F) COMPILER
Defined slot
in PL/I (F) COMPILER
Defining
in PL/I (F) COMPILER
dynamic
static
validity of
Defining control program areas
in CONTROL PROGRAM WITH MFT
Definite iteration operator
in FORTRAN IV SYNTAX CHECKER PLM
description of
purpose of
scan of
Definition phase
in SORT/MERGE
functions of
module list
Definition portion of syntactic line
in FORTRAN IV SYNTAX CHECKER PLM
contents of
metalanguage elements in
passive line, restriction on
Definition routines
in CONTROL PROGRAM WITH MFT
Definition vector field
in FORTRAN IV (H) COMPILER
DEFSBS table

36 GY27-7128
command

25 GY28-6642

25 GY28-6601

29 GY33-8009

29 GY28-6800
29 GY28-6800
29 GY28-6800
29 GY28-6800
29 GY28-6800
29 GY28-6800
29 GY28-6800

36 GY27-7128
25 GY28-6831

33 GY28-6597

25 GY28-683l

36 GY27-7128
25 GY28-6642

in COBOL (F)

24 GY28-6382

Degraded state of operation
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
DEIECF, field in DLCTLR
---rn-TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

DELAY (keyword attribute)
in PL/I SYNTAX CHECKER PLM
checking
subroutine ISDELAY (IKM12)
DELAY statement
in PL/I SUBROUTINE LIBRARY

29 GY28-6801

Delayed data transmission
in EMULATOR FOR 7090/7094/709411

35 GY27-7187

DELDON, field in DLCTLR
---rn-TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

DELEFR, field in DLCTLR
---rn-TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

DELERR, field in DLCTLR
---rn-TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

Delete
in TSO COMMAND PROC VOL1-DELETE
base pointer
control data items
full
functions of
indicator
operand
operati on of
organization of
partial
point level
point list
point list prototype
reentrant area pOinter
storage requirements
subcommand
DELETE
in MFT SUPERVISOR
entry point
flowchart
functional description
module description
module synopsis
DELETE, function of DAIR
in TSO COMMAND PROC VOL6-SUBMIT
DELETE, operands
in TSO COMMAND PRoC VOL2-DELETE
DELETE (keyword statement)
in PL/I SYNTAX CHECKER PLM
checking
subroutine RECIO (IKM22)
DELETE (system macro)
in PL/I SYNTAX CHECKER PLM
in DATAAREA DSECT
usage
Delete a data set password entry
in TSO COMMAND PROC VOL6-PROTECT
Delete Attention routine
in GRAPHICS ACCESS METHOD
DELETE command indicator
in TSO COMMAND PROCESSOR VOL1-ADD
DELETE command processor
in CRJE PLM
in REMOTE JOB ENTRY
in TSO COMMAND PROC VOL2-DELETE
diagrams MO
flowcharts
hierarchy

29 GY33-8009

Ii]

36 GY28-6771

36 GY27-7236

36 GY28-6776
36 GY28-6772
29 GY33-8009

29 GY33-8009

36 GY28-6776
30 GY27-7113
36 GY28-6771
36 GY30-2011
36 GY30-2005
36 GY28-6772

DELETE -

DELOLDPW

DELETE command processor
I in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
L--------------------------------------(continued)
introduction
messages
Delete data set
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
DELETE data set disposition
in TSO COMMAND PROC VOL6-PROTECT
36 GY28-6776
DELETE disposition
in JOB MANAGEMENT
36 GY28-6613
Delete from time delay QCB
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Delete job from queue
in TSO COMMAND PROC VOL5-0UTPUT
36 GY28-6775
DELETE macro
in TCAM SERVICEABILITY AIDS
30 GY30-2027
DELETE macro-instruction
in FORTRAN IV (E)
25 GY28-6601
compile-time use of
36 GY28-6775
in TSO COMMAND PROC VOL5-LISTDS
Delete operation routine
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
error and exceptional conditions
method of operation diagram
Delete option
in CATALOG MANAGEMENT
30 GY28-6606
in TSO CATALOG MANAGEMENT
36 GY28-6745
Delete routine
in MVT JOB MANAGEMENT
36 GY28-6660
description of
sequence of I/O operations
used by ASB routine
used by initiator
used by system output writer
in MVT SUPERVISOR
36 GY28-6659
description of
entry point name(s) of
flowchart of
module name for
synopsis of
DELETE subcommand
in TSO COMMAND PROC VOL1-BROADCAST 36 GY28-6771
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
summary of operations
syntax
DELETE subcommand processing
in TSO COMMAND PROCESSOR VOL1-ACCT 36 GY28-6771
basic operation
subcommand identification
termination of
DELETE subcommand processor (IKJEGDEL)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
diagram of
flowchart of
module description of
text description of
Deleting ACCOUNT userids
in TSO COMMAND PROC VOL1-BROADCAST 36 GY28-6771
Deleting CSECTs
in LOADER
31 GY28-6714
in ESD processing
in load module input
Deleting load modules
in FORTRAN IV (E)
25 GY28-6601
interface module
object listing module
performance module
Phase 5
source symbol module
Deletion, marks current procedure for
in TSO COMMAND PROC VOL6-WHEN/END 36 GY28-6776
Deletion, of compilation
in FORTRAN IV (H) COMPILER
25 GY28-6642

116
Deletion, record
in INDEXED SEQUEN. ACCESS METHOD
BISAM asynchronous code
count fields tagged for deletion
processing
Deletion control information
in UPDATE ANALYSIS PROGRAM
Deletion of a line
in TCAM SERVICEABILITY AIDS
Deletion routine (IHGUADEL)
in UPDATE ANALYSIS PROGRAM
Deletion table
in UPDATE ANALYSIS PROGRAM
Deletions
in UPDATE ANALYSIS PROGRAM
DELIM routine
in COBOL (F)
Delimiter
in ALGOL (F) COMPILER
initial treatment
internal representation
in ALGOL-TO-PL/l LCP
in TSO COMMAND PROC VOL6-WHEN/END
DELIMITER
in TSO TMP & SERVICE ROUTINES
parameter type
Delimiter card
in UPDATE ANALYSIS PROGRAM
Delimiter macro instruction
in TELECOMMUNICATION ACCESS METHOD
Delimiter Table
in ALGOL (F) COMPILER
Delimiters
in COBOL (F)
definition
Delimiters for
in PL/I SYNTAX CHECKER PLM
between statement elements (,)
character string (')
comments statements (/* */)
compile statements
(//

..

30 GY28-6618

36 GY28-7106
30 GY30-2027
36 GY28-7106
36 GY28-7106
36 GY28-7106
24 GY28-6382
26 GY33-8000
29 GY33-7006
36 GY28-6776
36 GY28-6770
36 GY28-7106
30 GY30-2029
26 GY33-8000
24 GY28-6382
29 GY33-8009

)

60-character set
null statement
(i) 60-character set
(%i)

(

..

)

ordinary PL/I statements
(i) 60-character set
(

, .)

PICTURE specification (')
prefixes
(
( : )

Delink table
---rn-LINKAGE EDITOR (F)
31 GY28-6667
contents
format
making an entry in
Delinkinq
in LINKAGE EDITOR (F)
31 GY28-6667
definition
example
in RLD processing
of common control sections
of external symbols
of nonbranch-type (A-type) address
constants
in LOADER
31 GY28-6714
DELOLDPW,. field name in IKJPARMD
in TSO COMMAND PROC VOL6-PROTECT

36 GY28-6776

DELPRMS - Descriptions

117
DELPRMS, data area
in TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

DELTEX-IEKQDT
---rn-FORTRAN IV

25 GY28-6642

(H)

COMPILER

DELxxx, field in DLCTLR
in TSO COMMAND PROC VOL1-DELETE
Demand allocation routine
in JOB MANAGEMENT
DEMANDFL (DATAAREA)
in PL/I SYNTAX CHECKER PLM
for LOAD macro (IKMOOx)
used in STATSORT (IKMOOx)

36 GY28-6771
36 GY28-6613
29 GY33-8009

DEND, field in DPLB
in TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

Dense record
in LINKAGE EDITOR (F)

31 GY28-6667

Density
in EMULATOR FOR 7090/7094/709411
35
in DEB
mixed, handled by tape
postprocessor
mixed, handled by tape preprocessor
supported by tape formatting
programs
33
in SORT/MERGE
in 7074 EMULATE FOR M/165
call density
current density
routine that sets
DENSITY card
in EMULATOR FOR 7090/7094/709411
35
Density Checker, Preprocessor
(IDENSITY)
in 7074 EMULATE FOR M/165
Density Checker routine (IDENSITY)
in EMULATOR FOR 7090/7094/709411
35
description
flowchart
DEPADDR
in COBOL-To-PL/l LCP
Dependency, inter-modular
in PL/I SUBROUTINE LIBRARY

GY27-7187

GY28-6597
GY27-7228

GY27-7187
GY27-7228
GY27-7187

29 GY33-7007
29 GY28-6801

Dependent common area
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
DEPOIN
---rn-ALGOL-TO-PL/l LCP
Depth numbers
in FORTRAN IV (H) COMPILER
determination of

29 GY33-7006
25 GY28-6642

DEQ
in MFT SUPERVISOR
entry point
flowchart
functional description
module description
module synopsis
DEQ from the UADS
in TSO COMMAND PROCESSOR VOL1-LIST
DEQ macro instruction
in CATALOG MANAGEMENT
in CONTROL PROGRAM WITH MFT
, DEFINE command processor use of
queue management use
small partition module use

in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
in MVT JOB MANAGEMENT
36 GY28-6660
used by I/O device allocation
routine
used by initiator
used by queue alter routine
used by queue
management
used by termination routine
in TSO CATALOG MANAGEMENT
36' GY28-6745

36 GY27-7236

36 GY28-6771
30 GY28-6606
36 GY27-7128

DEQFLG, field in CFLAGS
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-6771
Dequeue/job end processor
in CRJE PLM
entry point code
flowchart
messages requested
microfiche directory
module description
register usage
Dequeue routine
in CONTROL PROGRAM WITH MFT
in GRAPHICS ACCESS METHOD
in MVT JOB MANAGEMENT
description of
track stacking interface
used by initiator
used by system output writer
in MVT SUPERVISOR
description of
entry point name(s) of
flowcharts of
module name for
synopsis of
Dequeue TCB routine
in MVT SUPERVISOR
entry point name of
flowchart of
function of
module name for
synopsis of
Dequeued job list
in TSO COMMAND PROC VOL5-0UTPUT

36 GY30-2011

36 GY27-7128
30 GY27-7113
36 GY28-6660

36 GY28-6659

36 GY28-6659

36 GY28- 6775

Dequeuing
in CRJE PLM

36 GY30-2011

DESC (message descriptor)
in PL/I SUBROUTINE LIBRARY

29 GY28-6801

Descending sequences
in SORT/MERGE

33 GY28-6597

Describe Data Processor (IKAPDESO)
in GRAPHIC JOB PROCESSOR SUpPORT
chart
description of
extract record
in S/360 JOB PROCESSING 1130/2250
chart
description of
message module

36 GY27-7159

36 GY27-7166

Descriptions
in TSO COMMAND PROC VOL6-RENAME
36 GY28-6776
functional
of operation
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771
of modules
of output lines
Descriptions of modules,
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
IKJEFEOl
IKJEFE02

Descriptions - Device

118

Descriptions of modules,
I in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
L--------------------------------------(continued)
IKJEFE03
IKJEFE04
I KJEFE 0 5
IKJEFE06
Descriptor, output line
in TSO COMMAND PROCESSOR VOL6-TIME
Descriptor code
in EMULATOR FOR 7090/7094/709411
Descriptor codes
in CRJE PLM
Descriptor list, IKJPARS
in TSO COMMAND PROC VOL4-LISTALC
Descriptor queue element (DQE)
in INITIAL PROGRAM LOADER AND NIP
in MVT SUPERVISOR
construction of
format of
normal release of
Descriptors, device
in ONLINE TEST EXECUTIVE PROGRAM
discussion of
in illustration
DI::SCRIPVALUE
in COBOL-TO-PL/l LCP
Design points of the program
in LINKAGE EDITOR (F)
Designational expression
in ALGOL-TO-PL/l LCP

36 GY28-6776
35 GY27-7187
36 GY30-2011
36 GY28-6774
36 GY28-6661
36 GY28-6659

37 GY28-6651

Detection of syntactical errors
in PL/I (F) COMPILER

29 GY33-7007

Determining ESD type
in LINKAGE EDITOR (F)
Determining frame content
in GRAPHIC JOB PROCESSOR SUPPORT
parameter
select

LCP

Destination offset
in TELECOMMUNICATION ACCESS METHOD
Destination QCB
in TELECOMMUNICATION ACCESS METHOD
Destination QCB for main storage
queuing with disk backup
in TELECOMMUNICATION ACCESS METHOD
Destination scheduler
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
Destination scheduler disk only
queuing
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
Destination scheduler main storage
only queuing
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
DET-ROUT routine
--in COBOL (F)

36 GY27-7236

29 GY28-6801
36 GY28-6772
36 GY28-6659

29 GY28-6801
29 GY28-6801
29 GY28-6800
31 GY28-6667
36 GY27-7159

31 GY28-6667
29 GY33-7006

DE SPEC

--rnALGOL-TO- PL/1

in MFT SUPERVISOR
entry point
flowchart
functional description
module description
module synopsis
DETACH (post code)
in PL/I SUBROUTINE LIBRARY
DETACH macro instruction
in TSO COMMAND PROCESSOR VOL2-CALL
Detach routine
in MVT SUPERVISOR
description of
entry point name(s) of
flowchart of
module name for
synopsis of
DETACH routine
in PL/I SUBROUTINE LIBRARY
Detach subroutine (non-message)
in PL/I SUBROUTINE LIBRARY

29 GY33-7006
30 GY30-2029
30 GY30-2029
30 GY30-2029
30 GY30-2029

30 GY30-2029

30 GY30-2029

24 GY28-6382

DEUTYPE macro
in TCAM SERVICEABILITY AIDS
DEVDEPAD
in ONLINE TEST EXECUTIV~ PROGRAM
in common area
in glossary
in operation diagram
Device
---rn-MFT SUPERVISOR
release
reserve
Device allocation
in JOB MANAGEMENT
Device allocation and volume mounting
IEHPROGM, IEHMOVE, and IEHLIST
in UTILITIES
Device availability processing
in JOB MANAGEMENT
Device buffer
in EMULATOR FOR 7090/7094/709411
description
obtaining
releasing
Device characteristics block (DCHB)
in TCAM SERVICEABILITY AIDS
Device characteristics table (DCT)
in TELECOMMUNICATION ACCESS METHOD
Device codes
in BASIC TELECOMM. ACCESS METHOD
Device end
in ONLINE TEST EXECUTIVE PROGRAM
Device entry list
in TCAM SERVICEABILITY AIDS
Device entry table
in INPUT/OUTPUT SUPERVISOR
Device error recovery
in BASIC DIRECT ACCESS METHOD
Device I/O directory
in BASIC TELECOMM. ACCESS METHOD
format
providing additional space in
in QUEUED TELECOMM. ACCESS METHOD

30 GY30-2027
37 GY28-6651

36 GY27-7236

36 GY28-6613
for
32 GY28-6614
36 GY28-6613
35 GY27-7187

30 GY3Q-2027
30 GY30-2029
30 GY30-2001
37 GY28-6651
30 GY30-2027
30 GY28-6616
30 GY28- 6617
30 GY30-2001
30 GY30-2002

119
Device I/O directory
I in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
L--------------------------------------Ccontinued)
format and description
Device I/O module
in BASIC TELECOMM. ACCESS METHOD
30 GY30-2001
example
format
lists of
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
Device independent display operator
console support
in MFT SUPERVISOR
36 GY27-7236
in MVT SUPERVISOR
36 GY28-6659
Device manipulation
in FORTRAN IV CE)
25 GY28-6601
object-time routines for
Device mask table
in UTILITIES
32 GY28-6614
Device mask table CDMT)
in JOB MANAGEMENT
36 GY28-6613
deletion of
description of
functions of
storage requirements of
in MVT JOB MANAGEMENT
36 GY28-6660
format and description of
use of
Device name table CDNT)
36 GY28-6613
in JOB MANAGEMENT
36 GY28-6660
in MVT JOB MANAGEMENT
format and description of
Device range reduction
36 GY28-6613
in JOB MANAGEMENT
Device requirements
36 GY28-6660
in MVT JOB MANAGEMENT
Device statistics table
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
in data area directory
data area layout
Device strikeout routine
36 GY28-6613
in JOB MANAGEMENT
Device support modules
36 GY27-7236
in MFT SUPERVISOR
1052 open/close
entry point
flowchart
module description
module synopsis
1052 processor
entry point
flowchart
module description
module synopsis
1403/1443 open/close
entry point
module description
module synopsis
1403/1443 processor
entry point
module description
module synopsis
2540 open/close
entry point
module description
module synopsis
2540 processor
entry pOint
flowchart
module description
module synopsis
2740 processor
entry point
flowchart
module description
module synopsis

Device - DFPB

Device table
in INPUT/OUTPUT SUPERVISOR
in data area directory
data area layout
diagram of operation
in module directory
in TCAM SERVICEABILITY AIDS
Device tables
in ONLINE TEST EXECUTIVE PROGRAM
decoding information for
description of
illustration of
Device tests, under TOTE
in TCAM SERVICEABILITY AIDS
Device type field
in CATALOG MANAGEMENT
in TSO CATALOG MANAGEMENT
Devices
in ONLINE TEST EXECUTIVE PROGRAM
addresses of
bypassing of
characterstics of
data protection by type of
decoding of
demountable
intervention necessary
involved in testing
maximum number of
specification of
in TCAM SERVICEABILITY AIDS
communication
graphic
Devices, I/O
in INPUT/OUTPUT SUPERVISOR
DEVTYPE routine
direct access devices
for start I/O operations
magnetic tape devices
unit record and communications
2319 Disk Storage device
DEVTAB
in ONLINE TEST EXECUTIVE PROGRAM
in glossary
in operation diagram

30 GY28-6616

30 GY30-2027
37 GY28-6651

30 GY3G-2027
30 GY28-6606
36 GY28-6745
37 GY28- 6651

30 GY30- 2027

30 GY28- 6616

37 GY28-6651

DEVTYPE
in INPUT/OUTPUT SUPERVISOR
DEVTYPE macro instruction
DEVTYPE parameter
DEVTYPE routine
in module directory
DEVTYPE macro instruction
in COBOL (F)

24 GY28-6382

DFlLE-IEKTDF
FORTRAN IV

25 GY28- 6642

-rn

(H)

COMPILER

DFLOAT in-line function
---rn-tORTRAN IV CE)
compile-time processing of

30 GY28-6616

25 GY28-6601

DFLTPARM, data area
in TSO COMMAND PROC VOL2-DELETE

36 GY28-6772

DFLTPBLK, data area
in TSO COMMAND PROC VOL2-DELETE

36 GY28-6772

DFPB
---rn TSO COMMAND PROC VOL6-RENAME
36 GY28-6776
in TSO TMP , SERVICE ROUTINES
36 GY28-6770
DFPB (default service routine parameter
block)
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
description
operation

IIil

DFPB - Diagnostic
DFPB data area
in TSO COMMAND PROC VOL5-LISTDS
format
in data area directory
DFPB parameter block
in TSO COMMAND PROC VOL6-PROTECT
description
pointer to in DFPL
DFPBxxx, fields of DFPB
in TSO COMMAND PROC VOL5-LISTDS
DFPBxxxx, fields in DFPB
in TSO COMMAND PROC VOL2-DELETE

120
DIAGN

36 GY28-6175

36 GY28-6176

36 GY28-6175
36 GY28-6172

DFPL
---rn TSO COMMAND PROC VOL6-RENAME
36
constructed by IKJEHREN
flowchart
format
M.O. diagram
used by IKJEHDEF
in TSO TMP & SERVICE ROUTINES
36
DFPL, IKJEHDEF service routine parameter
list
in TSO COMMAND PROC VOL6-PROTECT
36
DFPL (Default Parameter List)
in TSO COMMAND PROC VOL5-0UTPUT
36
description
in IKJEFF60
DFPL (default service routine parameter
list)
in TSO COMMAND PROC VOL5-LISTDS
36
format
in data area directory
DFPL (IKJEHDEF parameter list)
in TSO COMMAND PROC VOL2-DELETE
36
description
in operation
DFPLxxx. fields of DFPL
in TSO COMMAND PROC VOL5-LISTDS
DFPLXXX (fields in DFPL)
in TSO COMMAND PROC VOL5-0UTPUT
DFPLxxxx., field in DFPL
in TSO COMMAND PROC VOL2-DELETE

GY28-6776

GY28-6770
GY28-6776
GY28-6775

GY28-6775

GY28-6772

36 GY28-6775
36 GY28-6775
36 GY28-6772

DFSTR
in GRAPHIC SUBRTN. PACKAGE

25 GY27-7152

DFTRMLST macro instruction
in BASIC TELECOMM. ACCESS METHOD

30 GY30-2001

DFUNCT-IEKJDF
in FORTRAN IV (H) COMPILER

25 GY28-6642

DHED
---rn TSO COMMAND PROCESSOR VOL1-ADD
data area
in directory
in TSO COMMAND PROCESSOR VOL1-CHNG
data area
in directory
DHED, data area
in TSO COMMAND PROC VOL1-DELETE
DHED (UADS directory header field)
in TSO COMMAND PROC VOL1-SUBRTNS
fields in
subfield displacements of
usage
by FREES PACE subroutine
by GETSPACE subroutine
DIAG
---rn SORT/MERGE
in parameter list

36 GY28-6771
36 GY28-6771

36 GY28-6771
36 GY28-6771

33 GY28-6597

---rn ONLINE

TEST EXECUTIVE PROGRAM

Diagnose DAIR, routine
in TSO COMMAND PROC VOL6-SUBMIT
Diagnose DAIR errors
in TSO COMMAND PROCESSOR VOL4-FREE
Diagnose instruction
in EMULATOR FOR 7090/7094/709411
DIAGNOSE instruction routine
in ONLINE TEST EXECUTIVE PROGRAM
Diagnose stop instruction
in MVT JOB MANAGEMENT
used by quiesce routine

37 GY28-6651
36 GY28-6776
36 GY28-6774
35 GY27-7187
37 GY28-6651
36 GY28-6660

Diagnosic aids
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
messages
register summary
Diagnostic
in LOADER
31 GY28-6714
aids
register contents at entry to
routines
dictionary print routine (IEWBTMAP)
messages
flowchart of
synopsis of
in SORT/MERGE
33 GY28-6597
messages
output of linkage editor
in TSO COMMAND PROC VOL4-LISTALC
36 GY28-6774
aids
messages
Diagnostic aids
in IBM 1419/1275 DEVICE DEP. BSAM 30 GY21-0012
common errors
debugging tips
in LINKAGE EDITOR (F)
31 GY28-6667
buffer allocation
error message--module cross-reference
table
register contents at entry to
module
table allocation
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
for syntax checker program
OS dumps
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
in TSO COMAND PROC VOL2-CNCL/STATUS36 GY28-6772
in TSO COMMAND PROC VOL1-BROADCAST 36 GY28-6771
in TSO COMMAND PROC VOL1-DELETE
36 GY28-6771
in TSO COMMAND PROC VOL1-SUBRTNS
36 GY28-6771
in TSO COMMAND PROe VOL2-ALLOCATE 36 GY28-6772
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
in TSO COMMAND PROC VOL4-LISTBC
36 GY28-6774
messages
register summary
in TSO COMMAND PROC VOL5-LISTCAT
36 GY28-6775
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
messages
register usage summary
in TSO COMMAND PROC VOL5-0UTPUT
36 GY28-6775
in TSO COMMAND PROC VOL6-PROFILE
36 GY28-6776
messages
register summary
in TSO COMMAND PROC VOL6-PROTECT
36 GY28-6776
in TSO COMMAND PROC VOL6-RENAME
36 GY28-6776
in TSO COMMAND PROC VOL6-SUBMIT
36 GY28-6776
in TSO COMMAND PROC VOL6-TERMINAL 36 GY28-6776
messages
register summary
in TSO COMMAND PROC VOL6-WHEN/END 36 GY28-6776
in TSO COMMAND PROCESSOR VOL1-ACCT 36 GY28-6771
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771

121
Diagnostic aids
I in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771
L--------------------------------------(continued)
register summary
messages
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771
messages
register summary
return codes
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
messages (text)
register summary
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
messages
register summary
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
registers
messages
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
Diagnostic aids, service Aids
in TCAM SERVICEABILITY AIDS
30 GY30-2027
Diagnostic aids, TOTE
in TCAM SERVICEABILITY AIDS
30 GY30-2027
Diagnostic directory print routine
(IEWLMBTP)
in LINKAGE EDITOR (F)
31 GY28-6667
during final processing
in program organization
list used during processing
table used during processing
Diagnostic message
in FORTRAN IV (H) COMPILER
25 GY28-6642
tables
error table
message pointer
in FORTRAN IV SYNTAX CHECKER PLM
25 GY28-6831
unique to language level
Diagnostic message chain
in PL/I (F) COMPILER
29 GY28-6800
Diagnostic message CSECT-IEBCOMPR
in UTILITIES
32 GY28-6614
Diagnostic Messages
in COBOL (E)
24 GY24-5009
in FORTRAN IV (E)
25 GY28-6601
compiler informative
error/warning
generation of
in LINKAGE EDITOR (F)
31 GY28-6667
construction
list used in construction
table used in construction
directory placement in output
for not executable attribute
general format
introduction to
on SYSPRINT data set
on SYSTERM data set
in PL/I (F) COMPILER
29 GY28-6800
allocation to phases
parameters in dictionary chain
in TSO COMMAND PROC VOL1-DELETE
36 GY28-6771
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
in TSO COMMAND FROC VOL6-RENAME
36 GY28-6776
in TSO COMMAND PROC VOL6-WHEN/END 36 GY28-6776
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
Diagnostic output (IEX21, IEX31 , IEX51>
in ALGOL (F) COMPILER
26 GY33-8000
Description
Flowcharts:
IEX21
IEX31
IEX51
Diagnostic output data set

Diagnostic - Diagrams

in LINKAGE EDITOR (F)
Diagnostic tests, OLT programs as
in ONLINE TEST EXECUTIVE PROGRAM
Diagnostic Write/Read routine
in QUEUED TELECOMM. ACCESS METHOD
chart
Diagnostics
in PL/I (F) COMPILER
for invalid characters
syntax errors
in 7074 EMULATE FOR M/165
DIAGNSFL (COMFLAG1)
in PL/I SYNTAX CHECKER PLM
DIAGPARS label
in TSO COMMAND PROCESSOR VOL6-RUN
in flowchart
Diagrams
in TSO COMMAND PROC VOL1-DELETE
introduction to
method of operation
symbols used
in TSO COMMAND PROC VOL4-LISTBC
cross referencing scheme
list of
philosophy of
in TSO COMMAND PROCESSOR VOL1-CHNG
introduction to the
organization of
in TSO COMMAND PROCESSOR VOL4-EXEC
organization of
symbols used
in TSO COMMAND PROCESSOR VOL4-FREE
contained in this PLM
philosophy of
Diagrams, introduction to
in TSO COMMAND PROC VOL6-WHEN/END
Diagrams, list of
in TSO COMMAND PROC VOL2-ALLOCATE
Diagrams, method of operation
in TSO COMMAND PROC VOL5-LISTDS
for LISTDS
introduction to
in TSO COMMAND PROC VOL6-PROFILE
in TSO COMMAND PROC VOL6-PROTECT
in TSO COMMAND PROC VOL6-RENAME
in TSO COMMAND PROC VOL6-TERMINAL
introduction to
organization of
in TSO COMMAND PROCESSOR VOL2-CALL
in TSO COMMAND PROCESSOR VOL4-HELP
in TSO COMMAND PROCESSOR VOL6-RUN
functions of
introduction to
organization
symbols used in
Diagrams, MO
in TSO COMMAND PROC VOL2-DELETE
introduction to
organization of
symbol table
Diagrams, operation
in LINKAGE EDITOR (F)
in LOADER
in TSO COMMAND PROCESSOR VOL1-LIST
formatting data requested
LIST processing summary
mapping userids
parsing the LIST command
searching a UADS tree structure
Diagrams (method of operation)
in TSO COMMAND PROC VOL5-LISTCAT
cross references to
introduction to

31 GY28-6667
37 GY28-6651
30 GY30-2002
29 GY28-6800
GY27-7228
29 GY33- 8009
36 GY28- 6776

36 GY28- 6771

36 GY28- 6774

36 GY28-6771
36 GY28-6774
36 GY28-6774

36 GY28-6776
36 GY28-6772
36 GY28-6775
36
36
36
36

GY28-6776
GY28-6776
GY28-6776
GY28- 6776

36 GY28-6772
36 GY28-6774
36 GY28-6776

36 GY28-6772

31 GY28-6667
31 GY28-6714
36 GY28-6771

36 GY28-6775

Ii]

122

Diagrams - Dictionary

Diagrams (method of operation)
I in TSO COMMAND PROC VOL5-LISTCAT
36 GY28-6775
L--------------------------------------(continued)
location of
organization of

DICPTR cell
DICPUT
in ALGOL-TO-PL/l LCP

29 GY33-7006

Dial Out-Call queue
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
Dial receive scheduler
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage

DICREAD
in COBOL-TO-PL/l LCP

29 GY33-7007

DICSPC routine
~COBOL (F)

24 GY28-6382

DICT
in ALGOL-TO-PL/l LCP

29 GY33-7006

DICTBD routine
----rnCOBOL (F)

24 GY28-6382

DIAR
in FORTRAN IV-TO-PLIl LCP

29 GY33-7000

~COBOL

(F)

24 GY28-6382

DICTIO

~COBOL-TO-PL/l LCP

29 GY33-7007

Dia~y

data set
ln GRAPHIC JOB PROCESSOR SUPPORT
36
summary of functions
use of
in S/360 JOB PROCESSING 1130/2250 36
activity chart
function of
use of
Diary Routine
in GRAPHIC JOB PROCESSOR SUPPORT
36
chart
description of
example of use
maintaining history of operations
producing printed record
Diary Routine (IKADIA)
in S/360 JOB PROCESSING 1130/2250 36
chart
description of
Diary Work Area (CCTDIAWA)
in GRAPHIC JOB PROCESSOR SUPPORT
36

GY27-7159
GY27-7166

GY27-7159

GY27-7166

GY27-7159

DIAU
in FORTRAN IV-TO-PL/l LCP

29 GY33-7000

DICADR cell
----rnCOBOL (F)

24 GY28-6382

DICEND
----rnCOBOL-TO-PL/l LCP

29 GY33-7007

DICENT routine
----rnCOBOL (F)

24 GY2 8- 63 82

DICEXT
----rnALGOL-TO-PL/l LCP

29 GY33-7006

DICL
in FORTRAN IV-TO-PL/l LCP

29 GY33-7000

DICNDl field
----rnCOBOL (F)
DICNDl pointer
in COBOL (F)

24 GY28-6382

DICND2 field
----rnCOBOL (F)
DICND2 pointer
in COBOL (F)
DICOT table
in COBOL (F)
DICPRO
----rnALGOL-TO-PL/l LCP

24 GY28-6382
24 GY28-6382
24 GY28-6382
24 GY28-6382

29 GY33-7006

Dictionaries
in ASSEMBLER (F)
external symbol (ESD)
global
local
relocation
in COBOL-TO-PL/l LCP
Dictionary
in ALGOL-TO-PL/l LCP
in COBOL (F)
definition
in FORTRAN IV (E)
chaining in
entry format
freeing of main storage for
index
initialization of
organi zation of
use of
in PL/I (F) COMPILER
accessing
annotated dump
areas
BCD entries
codes
communications region
constant chain
constructing
default rules
diagnostic message chain
diagnostic messages
dump
embryo entry
extended
hash table
identifiers
normal extended
normal size
organization
resident table
search
Dictionary, ESD, CESD
in TESTRAN
Dictionary, table
in TESTRAN
Dictionary (DATADICT)
in COBOL-TO-PL/l LCP
Dictionary attributes
in COBOL (F)
definition
Dictionary block
inPL/I (F) COMPILER
as communications region
control

21 GY26-3700

29 GY33-7007
29 GY33-7006
24 GY28-6382
25 GY28-6601

29 GY28-6800

37 GY28-6611
37 GY28-6611
29 GY33-7007
24 GY28-6382
29 GY28-6800

123
Dictionary block
I in PL/I (F) COMPILER
29 GY28-6800
L--------------------------------------(continued)
release
size
space allocation
Dictionary construction techniques
in ASSEMBLER (F)
21 GY26-3700
Dictionary entries
in COBOL (F)
24 GY28-6382
formats
FD
LD
RD

SD
in PL/I (F) COMPILER
29 GY28-6800
attributes
AUTOMATIC chain
code bytes
constants
copy made
data byte
defined data
definition of types
diagram for internal entry point
dimension table
dope vector descriptor
dummy reference
entry points
expanded
for file conditions
for file constants
for ON conditions
for STATIC DSAs
format
formats
AUTOMATIC chain delimiter
BCD entries
built-in-functions
CHECK list
code bytes
compiler labels
constants
data items
DED
DED2
dope vector skeletons
dope vectors for temporaries
DVD

ENTRY code byte
entry points
entry type 1
emtry type 2
entry type 3
entry type 4
entry type 5
error message
EVENT data
FED (Format Element Descriptor)
files
formal parameters
GENERIC entry
internal library functions
label BCD entries
label constants
label variables
ON condition
ON statements
optimization code byte
options code byte
parameter descriptions
parameter lists
pictures
RDV
second code byte
SETS list

Dictionary - DIDOeS

STATIC DSA
structure entries
symbol table entries
task identifiers
variable information
wprkspace requirements
GENERIC
INI'l'IAL value list
INITIAL values
internal formats
iterative DO-loops
labels
LIKE referemce
optimization
options code byte
picture table
pictures
RDV and DVD
record dope vector
REVERT statements
SIGNAL statements
skeleton dope vector
statement labels
symbol table
Dictionary entry formats (Phase F3)
in ASSEMBLER (F)
21
macro dictionary header
macro dictionary parameter entries
SETA variable
SETB variable (non-dimensioned)
SETB variable (dimensioned)
SETC variable
table format for symbols
Dictionary entry routine
in JOB MANAGEMENT
36
Dictionary handling
in COBOL (F)
24
Dictionary logical phase
in PL/I (F) COMPILER
29
Dictionary pointers
in FORTRAN IV (E)
25
replacement of
Dictionary search routine
in JOB MANAGEMENT
36
Dictionary section number
in ALGOL-TO-PL/1 LCP
29
Dictionary spill
in COBOL (F)
24
Dictionary structures
in ASSEMBLER (F)
21
Dictionary types
in ASSEMBLER (F)
21
DICTI02
in COBOL-TQ-PL/1 LCP
DIDOCS
--rnMFT SUPERVISOR
Asynchronous error module
entry point
flowchart
functional description
module description
module synopsis
Command module
entry point
flowchart
functional description
module description
module synopsis
Delete
entry point
flowchart
functional description
module description
module synopsis

II

GY26-3700

GY28-6613
GY28-6382
GY28-6800
GY28-6601
GY28-6613
GY33-7006
GY28-6382
GY26-3700
GY26-3700

29 GY33-7007
36 GY27-7236

DIDOCS - DJ:L

DIDOCS
I in MFT SUPERVISOR
36 GY27-7236
L--------------------------------------(continued)
Delete
entry point
flowchart
functional description
module description
module synopsis
Delete
entry point
flowchart
functional description
module description
mo.dule synopsis
Delete
entry point
flowchart
functional description
module description
module synopsis
DCK

entry point
flowchart
functional description
module description
module synopsis
DCK

entry point
flowchart
functional description
module description
module synopsis
DCK
entry pOint
flowchart
functional description
module description
module synopsis
Display
entry point
flowchart
functional description
module description
module synopsis
Display
entry point
flowchart
functional description
module description
module synopsis
extended save area
Light pen/cursor module
entry pOint
flowchart
functional description
module description
module synopsis
Message
entry point
flowchart
functional description
module description
module synopsis
Message
entry pOint
flowchart
functional description
modu~e description
module synopsis
Model 85 I/O module
entry point
flowchart
functional description
module description
module synopsis

124
Open/Close module
entry point
flowchart
functional description
module description
module synopsis
Options module
entry point
flowchart
functional description
module description
module synopsis
Processor module
entry point
flowchart
functional description
module description
module synopsis
Roll Mode module
entry pOint
flowchart
functional description
module description
module synopsis
Timer/Interpreter module
entry point
flowchart
functional description
module description
module synopsis
2250 I/O 1 module
entry point
flowchart
functional description
module description
module synopsis
2250 I/O 2 module
entry pOint
flowchart
functional description
module description
module synopsis
2260 I/O module
entry point
flowchart
functional description
module description
module synopsis
in MVT SUPERVISOR

36 GY28-6659

DIET
in FORTRAN IV-TQ-PL/1 LCP

29 GY33-7000

Difficult algorithms
in PL/I SYNTAX CHECKER, PLM

29 GY33- 8009

DIGFIELD
in COBOL-TO-PL/1 LCP

29 GY33-7007

Digit
in ALGOL-TQ-PL/1 LCP
Digit count. in K operator routine
in FORTRAN IV SYNTAX CHECKER PLM
as metalangauge element
Digit operator
in FORTRAN IV SYNTAX CHECKER PLM
DIL branch table
- i n 7074 EMUIATE FOR M/165
definition
use
DIL Count Dequeuing routine
in 7074 EMUIATE FOR M/165
DIL count expiration
in EMULATOR FOR 7090/7094/709411

29 GY33-7006
25 GY28-6831
25 GY28-6831
GY27-7228

GY27-7228
35 GY27-7187

125
DIL count interruption
in 7074 EMULATE FOR M/165
DIL count run out flag
in 7074 EMULATE FOR M/165
description
DIL Count Runout routine (IIOCTDIL)
in 7074 EMULATE FOR M/165
flowchart
function
MOD
DIL counter
in EMULATOR FOR 7090/7094/709411
DIL instruction
in 7074 EMULATE FOR M/165
logic
use
DIL queue
in EMULATOR FOR 7090/7094/709411
format
placing CST on
DIL trap flag
in 7074 EMULATE FOR M/165
description
position in FPR 0
use for error messages

GY27-7228
GY27-7228
GY27-7228

35 GY27-7187
GY27-7228

GY27-7228

29 @Y33-7000

DILT
in FORTRAN IV-TO-PL/l LCP

29 GY33-7000

DIL9 instruction
---rn EMULATOR FOR 7090/7094/709411

35 GY27-7187

DIMCOUNT (dimension count)
in PL/ I SYNTAX CHECKER PLM
for Dimension attribute
for service module IKM133
number of dimensions
Dimension (keyword attribute)
in PL/I SYNTAX CHECKER PLM
bound specification
dot qualification in
identifier in
checking
subroutine DIMCHECK (IKM23)
Dimension bound (*)
in PL/I SYNTAX CHECKER PLM
Dimension count
in PL/I SYNTAX CHECKER PLM
Dimension counter
in ALGOL-TO-PL/l LCP
Dimension entry
in FORTRAN IV (E)
in overflow table
Dimension information
in FORTRAN IV (E)
array displacement use of
Dimension level table
in PL/I SYNTAX CHECKER PLM
Dimension part
in FORTRAN IV (E)
Dimension section
in FORTRAN IV (E)
DIMENSION statement
in FORTRAN IV (E)
compile-time processing of
in FORTRAN IV (G) COMPILER
allocation for

variables specified on
in FORTRAN IV (H) COMPILER
in FORTRAN IV-TO-PL/l LCP
Dimensions
in FORTRAN IV-TO-PL/l LCP
Dimensions, inherited
in PL/I (F) COMPILER
Dimensions, number of
in ALGOL-TO-PL/l LCP
DIMFLAG (dimension attribute flag)
in PL/I SYNTAX CHECKER PLM
DIMLVTAB (dimension level table)
in PL/I SYNTAX CHECKER PLM
for service module IKM133
in ALLOCATE, DECLARE statements

25 GY28-6642
29 GY33-7000
29 GY33-7000
29 GY28-6800
29 GY33-7006
29 GY33-80091i]
29 GY33-8009

35 GY27-7187

DILG
in FORTRAN IV-TO-PL/l LCP

DIMCHECK
in PL/I SYNTAX CHECKER PLM
difficult algorithm in
subroutine (1KM23)

D1L - Direct

29 GY33-8009

DIMO
in FORTRAN IV-TO-PL/l LCP

29 GY33-7000

DINAM
in FORTRAN IV-TO-PL/l LCP

29 GY33-7000

DIOV
in FORTRAN IV-TO-PL/l LCP

29 GY33-7000

DIRAREA (broadcast data set I/O buffer)
in TSO COMMAND PROC VOLI-BROADCAST 36 GY28-6771
function of
length of
an input to IEEVSDI0
DIRAREA2 (broadcast data set I/O buffer)
in TSO COMMAND PROC VOLI-BROADCAST 36 GY28-6771
as input to IEEVSDI0
function of
length of
DIRC. field in DIRENTRY
in TSO COMMAND PROCESSOR VOLl-ADD

36 GY28-6771

29 GY33-8009

29 GY33-8009

29 GY33-8009
29 GY33-8009
29 GY33-7006
25 GY28-6601
25 GY28-6601
29 GY33-8009
25 GY28-6601
25 GY28-6601
25 GY28-6601
25 GY28-6638

DIRECT (keyword attribute)
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
attribute classification
in OPEN statement
Direct access device
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
alternate channel
building DAD table
primary channel
table
UCB initialization
UCB initialization (multiprocessing)
in MFT SUPERVISOR
36 GY27-7236
shared
Direct access device space management
(DADSM)
in INTRO. TO CONTROL PROGRAM LOGIG 36 GY28-6605
function of
use of
Direct access device space management
(DADSM) routines
in JOB MANAGEMENT
36 GY28-6613
Direct access devices. defined
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
in device table
start I/O routines
diagram
movable arm
non-movable arm
UCB fields used
use of DEB
volume verification
Direct access I/O data management interface
in FORTRAN IV (E)
25 GY28-6601

Direct - Directory

Direct access pool
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
Direct access storage device (DASD)
in ASSEMBLER (F)
21 GY26-3700
Direct access storage device initialization
in UTILITIES
32 GY28-6614
Direct access technique
in SORT/MERGE
33 GY28-6597
Direct access volume searching
in INPUT/OUTPUT SUPPORT
30 GY28-6609
BDAM parallel mounting
ISAM parallel mounting
Open routine
parallel mounting
reading additional DSCBs
Direct generation of graphic orders
in GRAPHIC SUBRTN. PACKAGE
25 GY27-7152
Direct-linkage calling sequence
in FORTRAN IV (H) COMPILER
25 GY28-6642
Direct system output (DSO)
in MVT JOB MANAGEMENT
36 GY2 8-6660
determination routine
initiator processing of
I/O device allocation use of
system output processing of
termination routine
processing of
use of queue management
writer
Direct system output (DSO) processing
in CONTROL PROGRAM WITH MFT
36 GY27-7128
job initiation routine use of
step deletion routine use of
step initiation routine use of
Direct system output control block (DSOCB)
in CONTROL PROGRAM WITH MFT
36 GY27-7128
in MVT JOB MANAGEMENT
36 GY28-6660
creation of
format and description of
Director
in GRAPHIC SUBRTN. PACKAGE
25 GY27-7152
Part 1
Part 2
Directories
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
data area
routine
Directors
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
complex
input
input/output
output
Directors, library format
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Directory
in BASIC DIRECT ACCESS METHOD
30 GY28-6617
in IBM 1419/1275 DEVICE DEP. BSAM 30 GY21-0012
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
in SORT/MERGE
33 GY28-6597
intermediate storage area
module
in TSO COMAND PROC VOL2-CNCL/STATUS36 GY28-6772
in TSO COMMAND PROC VOL1-DELETE
36 GY28-6771
block
data area
routine
work area
in TSO COMMAND PROC VOL1-SUBRTNS
36 GY28-6771
directory of data areas
directory of routines
header field, UADS
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY28-6772
data areas
routines
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772

126
in TSO COMMAND PROC VOL4-LISTALC
data area
PDS, reading of
routine
in TSO COMMAND PROC VOL4-LISTBC
block quantity
buffer
data area
routine
in TSO COMMAND PROC VOL5-LISTCAT
data areas (tables and parameter
entry points and routine names
in TSO COMMAND PROC VOL5-LISTDS
of data areas
of routines
in TSO COMMAND PROC VOL6-PROFILE
data area
routine
in TSO COMMAND PROC VOL6-PROTECT
data area
module
routine
in TSO COMMAND PROC VOL6-RENAME
module
routine
data area
in TSO COMMAND PROC VOL6-SUBMIT
in TS~ COMMAND PROC VOL6-TERMINAL
data area
routine
in TSO COMMAND PROCESSOR VOL1-ACCT
in TSO COMMAND PROCESSOR VOL1-ADD
data areas
entry information
routines
work area address
workarea
in TSO COMMAND PROCESSOR VOL1-CHNG
in TSO COMMAND PROCESSOR VOL1-LIST
of routines
of data areas
in TSO COMMAND PROCESSOR VOL2-CALL
data area
routine
in TSO COMMAND PROCESSOR VOL4-EXEC
data areas
routines
in TSO COMMAND PROCESSOR VOL4-FREE
data area
routine
in TSO COMMAND PROCESSOR VOL4-HELP
CSECT
data area
load module
routine
in TSO COMMAND PROCESSOR VOL6-SEND
data area
routine
Directory
in TSO COMMAND PROCESSOR VOL6-SEND
in TSO COMMAND PROCESSOR VOL6-TIME
Directory, microfiche
in LINKAGE EDITOR (F)
in LOADER
Directory, routine
in TSO COMMAND PROC VOL1-BROADCAST
Directory" routine and data area
in TSO COMMAND PROC VOL5-0UTPUT
in TSO COMMAND PROC VOL6-WHEN/END
Directory (IEXOO)
in ALGOL (F) COMPILER
Description
Flowcharts
DIRECTORY (load module to microfiche)
in PL/I SYNTAX CHECKER PLM
Directory addressing

36 GY28-6774

36 GY28-6774

36 GY28-6775
lists)
36 GY28-6775
36 GY28-6776
36 GY28-6776

36 GY28-6776

36 GY28-6776
36 GY28-6776
36 GY28-6771
36 GY28-6771

36 GY28-6771
36 GY28-6771
36 GY28-6772
36 GY28-6774
36 GY28-6774
36 GY28-6774

36 GY28-6776

36 GY28- 6776
36 GY28-6776
31 GY28-6667
31 GY28-6714
36 GY28-6771
36 GY28-6775
36 GY28-6776
26 GY33-8000

29 GY33-8009

127
Directory addressing
l--------------------------------------(continued)
in TSO COMMAND PROC VOL1-BROADCAST 36 GY28-6771
Directory array
in FORTRAN IV (H) COMPILER
25 GY28-6642
Directory block
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771
processing of
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
definition
use of
Directory block, quantity
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY28-6772
Directory block, record quantity
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
Directory block quantity
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
Directory entry address-IEBCOPY obtaining
in UTILITIES
32 GY28-6614
Directory module (IITDIR)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
Directory of a partitioned data set
in CATALOG MANAGEMENT
30 GY28-6606
in TSO CATALOG MANAGEMENT
36 GY28-6745
Directory of modules
in S/360-1130 DATA TMN. - FORTRAN 25 GY27-7161
Directory record
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
Directory scan-IEBCOPY
in UTILITIES
32 GY28-6614
Directory search routine
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
error and exceptional conditions
method of operation diagram
Directory update routine
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
error and exceptional conditions
method of operation diagram
Directory work area, pointer to
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-677l
Directory work area (DIRYWA)
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-677l
DIRENTRY
in TSO COMMAND PROCESSOR VOL1-ADD
data area
in directory
DIRENTRY (UADS directory entry)
in TSO COMMAND PROC VOL1-SUBRTNS
fields in
input to IKJEFA5l
sub field displacements of

36 GY28-677l

36 GY28-677l

DIRF
---rn DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
DIRMNSW" field in COMMON
in TSO COMMAND PROCESSOR VOL1-ADD

36 GY28-677l

DIRWA, data area
COMMAND PROC VOL1-DELETE

36 GY28-677l

---rn TSO

DIRWAPTR., field in RDWRPARM
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-677l
DIRWAREA
in TSO COMMAND PROCESSOR VOL1-ADD
data area
in directory
DIRWAREA (UADS directory work area)
in TSO COMMAND PROC VOL1-SUBRTNS
fields in
input to IKJEFA5l
pointer to
size of

36 GY28-6771

36 GY28-677l

Directory - Disk
DIRxxxx, fields in DIRENTRY
in TSO COMMAND PROCESSOR VOL1-ADD
DIRxxxxx, fields in DIRWAREA
in TSO COMMAND PROCESSOR VOLl-ADD

36 GY28-6771

DIRYBLK, field in DIRWA
in TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

36 GY28-6771

DIRYWA
---rn-TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
data area
in dl.rectory
..,.
DIRYWA (work area for a directory from the
UADS)
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771
format
use

IIl!J

Disable SVC
in INDEXED SEQUEN. ACCESS METHOD
30
Disabled
in TELECOMMUNICATION ACCESS METHOD 30
Disabled for I/O interrupts
in TSO COMAND PROC VOL2-CNCL/STATUS36
Disabled for interruptions
in MACHINE-CHECK HANDLER, M135/145 30
Disabled ready queue
in TELECOMMUNICATION ACCESS METHOD 30
Disabled wait state
in MACHINE-CHECK HANDLER, S360 M85 31
MeH exits

GY28-6618
GY30-2029
GY28-6772
GY27-7237
GY30-2029
GY27-7184

Disabling prefix options
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Disabling the line
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
DISCONNECT THE SUBSYSTEM
option
in S/360 JOB PROCESSING 1130/2250
Disconnect user terminal
in TSO CONTROL PROGRAM
after abnormal termination
Disconnecting control volumes
in CATALOG MANAGEMENT
in TSO CATALOG MANAGEMENT

30 GY28-6606
36 GY28-6745

Disengage (CNTRL)-IGG019V4
in IBM 1419/1275 DEVICE DEP. BSAM

30 GY21-0012

Disk directory address
in SORT/MERGE
Disk drive, data protection of
in ONLINE TEST EXECUTIVE PROGRAM
Disk end appendage
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
functions
library
microfiche directory
module description
register usage
Disk end appendage for a single CPB
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
Disk end appendage routine
in QUEUED TELECOMM. ACCESS METHOD
chart

36 GY27-7166
36 GY28-7199

33 GY28-6597
37 GY28-665l
30 GY30-2029

30 GY30-2029

30 GY30-2002

128

Disk - Display

Disk end queue
in TELECOMMUNICATION ACCESS METHOD
Disk I/O management routines
in TELECOMMUNICATION ACCESS METHOD
Disk I/O QCB
in TELECOMMUNICATION ACCESS METHOD
Disk I/O routine
in QUEUED TELECOMM. ACCESS METHOD
chart
Disk I/O subtask
in QUEUED TELECOMM. ACCESS METHOD
Disk input/output queue
in QUEUED TELECOMM. ACCESS METHOD
Disk message queue initializer
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
method of operation
microfiche directory
module description
register usage
Disk message queues close routine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
Disk message queues open routines
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage

30 GY30-2029

in TSO COMMAND PROC VOL4-LISTBC
Dispatcher subroutine
in FORTRAN IV (H) COMPILER

36 GY28-6174
25 GY28-6642

30 GY30-2029
30 GY30-2029
30 GY30-2002
30 GY30-2002
30 GY30-2002
30 GY30-2029

30 GY30-2029

30 GY30-2029

DISKZ subroutine, function of
in S/360 JOB PROCESSING 1130/2250

36 GY27-7166

Dismount messages
in JOB MANAGEMENT

36 GY28-6613

DISP parameter of DD card
in CATALOG MANAGEMENT
in TSO CATALOG MANAGEMENT

30 GY28-6606
36 GY28-6745

Dispatcher
in CRJE PLM
36
in INTRO. TO CONTROL PROGRAM LOGIC 36
in MFT SUPERVISOR
36
entry point
flowchart
functional description
module description
module synopsis
36
in MVT SUPERVISOR
description of
entry point name(s) of
flowcharts of
module name for
synopsis of
in REMOTE JOB ENTRY
36
in TCAM SERVICEABILITY AIDS
30
entry
functions
in TSP CONTROL PROGRAM
36
Dispatcher" operating system
in MACHINE-CHECK HANDLER" M155/165 30
for error recording
for task termination
Dispatcher modified for emulator
in EMULATOR FOR 7090/7094/709411
35
Dispatcher of BRODCAST NOTICES messages

GY30-2011
GY28-6605
GY27-7236

GY28-6659

GY30-2005
GY30-2027
GY28-7199
GY27-7198

GY27-7187

Dispatching priority
in MFT SUPERVISOR
changing
specifying
in MVT JOB MANAGEMENT
in MVT SUPERVISOR
changing of
use of by the Dispatcher
in PL/I SUBROUTINE LIBRARY
Dispatching priority (value)
in PL/I SUBROUTINE LIBRARY
Displacement
in FORTRAN IV (E)
base
in arrays
Displacement conventions
in FORTRAN IV SYNTAX CHECKER PLM
Displacement for adcon
in FORTRAN IV (H) COMPILER
Displacement tables
in FORTRAN IV (E)
Displacement value
in TSO COMMAND PROCESSOR VOL6-TIME
of PUTPL
of TIMESBUF

36 GY27-7236
36 GY28-6660
36 GY28-6659
29 GY28-6801
29 GY28-6801
25 GY28-6601

25 GY28-6831
25 GY28-6642
25 GY28-6601
36 GY28-6776

DISPLAY
in COBOL-To-PL/1 LCP
29 GY33-7007
DISPLAY (keyword statement)
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
checking
options:
subroutine ISDISPLY (IKM22)
Display Attention Routine (IKADAT)
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
chart
description of
example of use in defining a job
processing light pen attentions
Display command
in JOB MANAGEMENT
36 GY28-6613
DISPLAY command
in MVT JOB MANAGEMENT
36 GY28-6660
CONSOLES
active
description of
jobnames
DISPLAY command processing
in CONTROL PROGRAM WITH MFT
36 GY27-7128
CONSOLES
jobname
DISPLAY Command Processor (IIODSPLY)
in 7074 EMULATE FOR M/165
GY27-7228
flowchart
function
MOD
Display Command routine (IITDSL)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
Display Control Module
in MVT SUPERVISOR
36 GY28-6659
format of
Display control module (DCM)
in MFT SUPERVISOR
36 GY27-7236
format of
Display Generation and Manipulation Routine
(IKADGM)
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
chart
description of
example of use in defining a job
GENPST subroutine of

129
Display Generation and Manipulation Routine
I (IKADGM)
I in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
l--------------------------------------(continued)
GPSTORD subroutine of
relationship of subroutines
Display Input Routine (IKADIR)
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
chart
description of
example of use in defining a job
Display Literal Definitions
in COBOL (F)
24 GY28-6382
Procedure A-Text format
Display Literal field
in COBOL (F)
24 GY28-6382
Display Literals
in COBOL (F)
24 GY28-6382
Display Message Routine (IKADMSG)
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
chart
description of
example of use in defining a job
GENINT subroutine of
GENMSG subroutine of
GINTORD subroutine of
GMSGORD subroutine of
relationship of subroutines
Display of messages
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
error messages
job description messages
5MB messages
Display options routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
Display-oriented routines
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
description of
functions of
list of
Display OUtput Routine (IKADOR)
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
chart
description of
example of use in defining a job
parameter list (DORLIST)
Display prompting information
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
Display Routine (SGDSP)
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
chart
description of
DISPLAY statement
in FORTRAN IV (G) COMPILER
25 GY28-6638
NAME LIST table for
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
DISPLAY statements, parameter list
in PL/I (F) COMPILER
29 GY28-6800
Display Strings
in COBOL (F)
24 GY28-6382
DISPLAY subroutine
in COBOL (F)
24 GY28-6382
DISPLAY with EVENT option
in PL/I SUBROUTINE LIBRARY
29 GY2S-6801
Displaying frames
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
parameter frame
select frame
Dis~laying messages
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159

Display - DLFLGl
job description message
use of system message blocks in
Disposition
in MVT JOB MANAGEMENT
Disposition, data set
in JOB MANAGEMENT
CATLG
conditional
DELETE
KEEP
PASS
UNCATLG
Disposition, normal
in TSO COMMAND PROC VOL4-LISTALC
indicators
Disposition and unallocation
in JOB MANAGEMENT
Disposition flags, data set
in TSO COMMAND PROCESSOR VOL2-CALL
Disposition of data set
in TSO COMMAND PROC VOL2-DELETE
Disposition of data sets
in TSO COMMAND PROCESSOR VOL4-EXEC
DISTANCFORIG
in COBOL-TO-PL/l LCP
Distribution Control Record
in UPDATE ANALYSIS PROGRAM
Distribution entry
in TELECOMMUNICATION ACCESS METHOD
Distribution list
in TELECOMMUNICATION ACCESS METHOD
Distribution list queue
in QUEUED TELECOMM. ACCESS METHOD
Distribution list routine
in QUEUED TELECOMM. ACCESS METHOD
chart
Distribution list subtask
in QUEUED TELECOMM. ACCESS METHOD
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
DITY
---rn FORTRAN IV-TO-PL/l LCP
Divide-check
---rn-EMULATOR FOR 7090/7094/709411
indicator
interruption condition
Divide interrupt
in PL/I SUBROUTINE LIBRARY
Division skeleton instruction
in FORTRAN IV (H) COMPILER
Division symbol (/)
in PL/I SYNTAX CHECKER PLM
DJSEARCH Subroutine
in MVT SUPERVISOR
description of
flowchart of
DLCTLR, data area
in TSO COMMAND PROC VOL1-DELETE

36 GY28-6660
36 GY28-6613

Ii]
36 GY28-6774
36 GY28-6613
36 GY28-6772
36 GY28-6772
36 GY28-6774
29 GY33-7007
36 GY28-7106
30 GY30- 2029
30 GY30- 2029
30 GY30-2002
30 GY30-2002
30 GY30-2002
30 GY30-2029

29 GY33-7000
35 GY27-7187

29 GY28-6801
25 GY28-6642
29 GY33-S009
36 GY2S-6659

36 GY2S-6771

DLFLG1, field in CHNGPDL
---rn-TSO COMMAND PROCESSOR VOL1-CHNG 36 GY2S-6771

130

DLFLG2 - DON
DLFLG2, field in CHNGPDL
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
DLFLG3, field in CHNGPDL
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
DLFLG4, field in CHNGPDL
---rn-TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
DLP~l,

field in DELPRMS
in TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

DLPRM2, field in DELPRMS
in TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

DLPTR1, field in CHNGPDL
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
DLPTR2, field in CJ::INGPDL
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
DLPTR3, field in CHNGPDL
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
DLPTR4, field in CHNGPDL
---rn-TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
DLSVAL cell
in COBOL (F)

24 GY28-6382

DLTA function
---rn CATALOG MANAGEMENT
in TSO CATALOG MANAGEMENT

30 GY28-6606
36 GY28-6745

DLTX function
--rn CATALOG MANAGEMENT
in TSO CATALOG MANAGEMENT

30 GY28-6606
36 GY28-6745

DMAP option
in COBOL (F)

24 GY28-6382

DMPRO
in FORTRAN IV-TQ-PL/l LCP

29 GY33-7000

in JOB MANAGEMENT

36 GY28-6613

DMY DIMENSION roll
---in FORTRAN IV (G) COMPILER

25 GY28-6638

DNAMID, data area
---rn-TSO COMMAND PROC VOL i-DELETE

36 GY28-6771

DNOB
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
data area
in directory
DNOB (number offset block)
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771

in ALGOL-TO-PL/l LCP
in FORTRAN IV (H) COMPILER
implied
in strength reduction
DO (keyword statement)
in PL/I SYNTAX CHECKER PLM
checking
iterative (IKM21)
non-iterative (IKM03)
expression argument
flags
options
part of data-lis~
specification (type 3)
subroutine DO (IKM21)
variable argument
DO group stack
in PL/I (F) COMPILER
DO-loop control optimization
in PL/I (F) COMPILER
DO LOOP UNIFY routine
in FORTRAN IV (G) COMPILER
DO loops
in FORTRAN IV (G) COMPILER
in Allocate
in Parse
in Gen
in Unify
DO LOOPS OPEN roll
in FORTRAN IV (G) COMPILER
description
in Allocation
in Parse
DO MAP
in PL/I (F) COMPILER
chain
table
DO NEST UNIFY
in FORTRAN IV (G) COMPILER
DO specification
in PL/I SYNTAX CHECKER PLM
expression in
pOinter to current (REPLEFT)
subroutine D07 (IKM21)
DO STA XLATE routine
in FORTRAN IV (G) COMPILER
DO statement
in FORTRAN IV (E)
compile-time processing
of
in FORTRAN IV-TO-PL/l LCP
DO statements, count
in PL/I (F) COMPILER
DOCLS, field in DPLB
---rn
TSO COMMAND PROC

VOL1-DELETE

Document buffer area
in IBM 1419/1275 DEVICE DEP. BSAM

29 GY33-7006
25 GY28-6642

29 GY33- 8009

29 GY28-6800
29 GY28-6800
25 GY28- 6638
25 GY28-6638

25 GY28-6638

29 GY28-6800

25 GY28-6638
29 GY33-8009

25 GY28-6638
25 GY28-6601
29 GY33-7000
29 GY28-6800
36 GY28-6771
30 GY21-0012

DNOBD

---rn TSO COMMAND

PROCESSOR VOL1-CHNG
data area
in directory
DNOBD, data area
in TSO COMMAND PROC VOL1-DELETE
DNOBD (account number data block)
in TSO COMMAND PROCESSOR VOL1-ADD
data area
in data area directory
DNOBD (number data block)
in TSO COMMAND PROCESSOR VOL1-LIST

36 GY28-6771

36 GY28-6771
36 GY28-6771

DOFLAG
in PL/I SYNTAX CHECKER PLM
dollar sign ($)
alphanumeric character
PICTURE specification character

29 GY33-8009

DOLOC
36 GY28-6771

~ PL/I SYNTAX CHECKER PLM

29 GY33-8009

36 GY28-6613

DOM macro instruction
---in MVT JOB MANAGEMENT

36 GY28-6660

DNT
in JOB MANAGEMENT

DODAIR, field in WEARTOGO
---rn-TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776

"Don't copy" - DPPACK

131
"Don't copy" bit-IEBCOPY
in UTILITIES
DOOPR
in ASSEMBLER (F)

32 GY28-6614
21 GY26-3700

definition
Downward reference
in LINKAGE EDITOR (F)
D06

in COBOL-TO-PL/l LCP
'dope vector required' bit
in PL/I (F) COMPILER
Dope vector,. virtual origin slot
in PL/I (F) COMPILER
Dope vector address restrictions
in PL/I SUBROUTINE LIBRARY
Dope vector descriptor. dictionary
entry
in PL/I (F) COMPILER
Dope vector descriptor (DVD)
in PL/I SUBROUTINE LIBRARY
DOPRO
in FORTRAN IV-To-PL/l LCP
DORLIST
in GRAPHIC JOB PROCESSOR SUPPORT
format of
use of

31 GY28-6667
29 GY33-7007

29 GY28-6800
29 GY28-6800
29 GY28-6801

in CRJE PLM
DP COMPLEX CONST roll
in FORTRAN IV (G) COMPILER
DP CONST roll
in FORTRAN IV (G) COMPILER
description
general

36 GY30-2011
25 GY28-6638
25 GY28-6638

29 GY28-6800

29 GY33-7000

DPA (Driver Parameter Area)
---in TSO CONTROL PROGRAM
format of
use in subsystem
communication

36 GY27-7159

DPASSPCE. field in PARSMACS
in TSO COMMAND PROCESSOR VOL1-ADD

36 GY28-6771

DPASxxx. field in DPLB
in TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

DPCELL
---rn-ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

29 GY28-6801

DOS to OS VTOC conversion routines
---in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
calling
description

36 GY28-7199

DPCHAN

DOSIZ
in COBOL-To-PL/1 LCP
DOSW
in FORTRAN IV-TO-PL/l LCP
Dot qualification symbol (.)
in PL/I SYNTAX CHECKER PLM
DOTREFFL (dot qualification flag)
in PL/I SYNTAX CHECKER PLM
in COMFLAG2
Double argument in-line functions
in FORTRAN IV (E)
, compile-time processing of
DOUBLE PRECISION
in FORTRAN IV-TO-PL/l LCP
Double-precision constants
in FORTRAN IV (E)
assignment of relative addresses
for
dictionary chain for
DOUBLE PRECISION statement
in FORTRAN IV (E)
compile-time processing of
Doubleword
in TSO COMMAND PROC VOL6-WHEN/END

37 GY28-6651

DPCLSF1. field in DPLB
in TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

DPCLSF2. field in DPLB
in TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

DPFLOC. field in DPLB
---rn-TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

29 GY33-7007
29 GY33-7000
29 GY33-8009
29 GY33-8009

25 GY28-6601

DPI (delete point list)
in TSO COMMAND PROC VOL1-DELETE
entry name list
initialization of

29 GY33-7000

DPLB. da ta area
in TSO COMMAND PROC VOL1-DELETE

25 GY28-6601

25 GY28-6601
36 GY28-6776

DOWN subcommand
----in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
summary of operations
syntax
Downward call
in LINKAGE EDITOR (F)
Downward calls list
in LINKAGE EDITOR (F)
format
introduction to
making an entry in
Downward compatible attribute (DC)
in LINKAGE EDITOR (F)
and grouping control sections

~ONLINE TEST EXECUTIVE PROGRAM

31 GY28-6667

36 GY28-6771

36 GY28-6771

DPOB
~n TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
data area
in directory
DPOB (password offset block)
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771
DPOBD
in TSO COMMAND PROCESSOR VOL1-CHNG
data area
in directory
DPOBD. data area
in TSO COMMAND PROC VOL1-DELETE
DPOBD (password data block)
in TSO COMMAND PROCESSOR VOL1-ADD
data area
in data area directory
in TSO COMMAND PROCESSOR VOL1-LIST

36 GY28-6771

36 GY28-6771
36 GY28-6771
36 GY28-6771

31 GY28-6667

31 GY28-6667

DPOFxxx,. field in DPLB
in TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

DPPACK
---rn-ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

DPQB - DROP

132

DPQE
in MVT SUPERVISOR

36 GY28-6659

DPRFLG switch
---rn-ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

DPRINT
---rn-ONLINE TEST EXECUTIVE PROGRAM
comments printing routine
header printing routine
results printing routine
routine, general
DPRINT parameter list
in TCAM SERVICEABILITY AIDS
DPRINT Service module
in TCAM SERVICEABILITY AIDS
entry
functions
DPRINT Service module
in TCAM SERVICEABILITY AIDS
entry
functions
DPRINT Service module
in TCAM SERVICEABILITY AIDS
entry
functions

37 GY28-6651

30 GY30-2027
30 GY30-2027

30 GY30-2027

30 GY30-2027

DPSWDCN, field in DPLB
in TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

DPSWDTN, field in DPLB
in TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

DPTAPE
---rn-ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

DPUTLCON, field of PARMLSTS
in TSO COMMAND PROC VOL5-LISTDS
DPUTLCON field in PARMLSTS
in TSO COMMAND PROC VOL4-LISTALC

36 GY28-6775

36 GY28-7199
36 GY28-7199
36 GY28-6771
36 GY28-6771
36 GY28-7199
32 GY28-6614
25 GY28-6638

Driving mechanism
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774

in MVT SUPERVISOR

36 GY28-6659

DQJOBLIST
in TSO COMMAND PROC VOL5-0UTPUT

36 GY28-6775

DQLOAD subroutine
in MVT SUPERVISOR
function of

36 GY28-6659

DQTCB
in MVT SUPERVISOR

36 GY28-6659

field in DPLB
TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

DRCLSF1" field in DPLB
in TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

---rn

21 GY26-3700

36 GY28-6774

!2Q.§.

DRcLS"

slice
changing background execution
time
changing region priority
general description
interaction with TSIP and TSO
Dispatcher
operation
priority scheduling
record of entries to
requesting new time
slice
swap scheduling
TSEVENT processing
DRIVER
in ASSEMBLER (F)
Driver Control Area
in TSO CONTROL PROGRAM
Driver Control Area Region Extension
in TSO CONTROL PROGRAM
Driver data field
in TSO COMMAND PROC VOL1-DELETE
in TSO COMMAND PROCESSOR VOL1-ADD
Driver Parameter Area
in TSO CONTROL PROGRAM
Driver routines-IEBTCRIN
in UTILITIES
Drivers
in FORTRAN IV (G) COMPILER
ADDRESS field
artificial
control
definition of
EOE
formats of
operation
OPERATOR field
plus and below phony
TAG field

DRCNMCN" field in DPLB
in TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

DRCNMTN" field in DPLB
in TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

DRDONPTR field in E01DATDF
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
DRFLOC, field in DPLB
in TSO COMMAND PROC VOL1-DELETE
Driver
in TSO CONTROL PROGRAM
background scheduling
calculation of minor time

36 GY28-6771
36 GY28-7199

DROB
---rn TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
data area
in directory
DROB, data area
in TSO COMMAND PROC VOL1-DELETE
36 GY28-6771
DROB (procname offset block)
in TSO COMMAND PROCESSOR VOLl-LIST 36 GY28-6771
DROBD

---rndata
TSO

COMMAND PROCESSOR VOL1-CHNG
area
in directory
DROBD, data area
in TSO COMMAND PROC VOL1-DELETE
DROBD (procedure name data block)
in TSO COMMAND PROCESSOR VOL1-ADD
data area
in data area directory
DROBD (procname data block)
in TSO COMMAND PROCESSOR VOL1-LIST

36 GY28-6771

36 GY28-6771
36 GY28-6771

36 GY28-6771

DROBDMDL, in data directory
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-6771
DROP
---rn ASSEMBLER (F)
21 GY26-3700
DROP item in pseudo code
in PL/I (F) COMPILER
29 GY28-6800
DROP subcommand processor (IKJEGDRP)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
diagram of
flowchart of

133
DROP subcommand processor (IKJEGDRP)
I in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
L--------------------------------------(continued)
module description of
text description of
DROPB
---rn
ASSEMBLER

(F)

21 GY26-3700

DROxxx" field in DPLB
---rn-TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

DRPOCPCE, field in PARSMACS
in TSO COMMAND PROCESSOR VOL1-ADD

36 GY28-6771

DRPX function
in CATALOG MANAGEMENT
in TSO CATALOG MANAGEMENT

30 GY28-6606
36 GY28-6745

Drum storage allocation
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
DRVERl
---rn-ASSEMBLER (F)

21 GY26-3700

DS
in ASSEMBLER (F)
DSA
in PL/I (F) COMPILER
in PL/I SUBROUTINE LIBRARY
, ru n-time stack'
address
chain
format
save-area chain
size
DSA (Dynamic storage Area)
in PL/I SUBROUTINE LIBRARY
DSA chain search
in PL/I SUBROUTINE LIBRARY
DSA definition
in PL/I SUBROUTINE LIBRARY
DSA format
in PL/I SUBROUTINE LIBRARY

21 GY26-3700
29 GY28-6800
29 GY28-6801

GRAPHIC SUBRTN. PACKAGE

use of
DSCB (data set control block)
in CATALOG MANAGEMENT
30 GY28-6606
format switch in
information from
representation of generation nos.
in
secondary allocation quantity in
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
36 GY28- 6745
in TSO CATALOG MANAGEMENT
format switch in
information from
representation of generation nos. in
secondary allocation quantity in
in TSO COMMAND PROC VOL6-PROTECT
36 GY28-6776
DSCB formatting-IEHLIST
in UTILITIES
32 GY28-6614
DSDR
in CONTROL PROGRAM WITH MFT
DSDR processing
in MVT JOB MANAGEMENT
DSE
---in TSO COMMAND PROC VOL2-DELETE
in TSO COMMAND PROC VOL4-LISTALC
in TSO COMMAND PROC VOL4-LISTBC
in TSO TMP & SERVICE ROUTINES
DSE (data set extension)
in TSO COMMAND PROC VOL5-LISTDS
chain
format
in data area directory
ill TSO CONTROL PROGRAM
construction of
release of
DSE entries, unused
in TSO COMMAND PROC VOL2-ALLOCATE

36 GY27-7128
36 GY28-6660
36
36
36
36

GY28-6772
GY28- 6774
GY28-6774
GY28-6770

36 GY28-6775

36 GY28-7199

36 GY28-6772

29 GY28-6801
29 GY28-6801
29 GY28-6801
29 GY28-6801

DSATN

---rn

DROP - Dsname

25 GY27-7152

DSECT
in ASSEMBLER (F)
in TSO COMMAND PROC VOL4-LISTBC
for mapping special first record
for message units used in LOGON
processing
DSECT maps
in TSO COMMAND PROCESSOR VOL4-FREE
DSECT of PDL
in TSO COMMAND PROC VOL6-PROFlLE

21 GY26-3700
36 GY28-6774

36 GY28-6774
36 GY28-6776

DSB
in ASSEMBLER (F)
in CONTROL PROGRAM WITH MFT
DSB (Data Set Block)
in TSO COMMAND PROC VOL5-0UTPUT
DSB processing
in REMOTE JOB ENTRY
DSBBUF (SMBBUF), in IDPARAMS
---rn-TSO COMMAND PROC VOL5-0UTPUT
DSBHOLD
in TSO COMMAND PROC VOL5-0UTPUT
DSBUFFER, field name in DAIRSTOR
in TSO COMMAND PROCESSOR VOL6-RUN
DSCB
in INDEXED SEQUEN. ACCESS METHOD
in JOB MANAGEMENT
in MVT JOB MANAGEMENT
in TSO COMMAND PROC VOL5-LISTDS
DSCB, defined in glossary
in INPUT/OUTPUT SUPERVISOR
DSCB (data control block)
in INTRO. TO CONTROL. PROGRAM LOGIC
construction of

21 GY26-3700
36 GY27-7128

DSECTB
- r nASSEMBLER (F)

21 GY26-3700

36 GY28-6775

DSENQ
in CONTROL PROGRAM WITH MFT

36 GY27-7128

---rn TSO

DSLEN, field in DSNPDE
COMMAND PROCESSOR VOL6-RUN

36 GY28-6776

DSLENG, subfield name in DAIRSTOR
-rnTSO COMMAND PROCESSOR VOL6-RUN

36 GY28-6776

DSLIST file
-rnCRJE PLM

36 GY30-2011

DSLOTS
-rnPL/I (F) COMPILER

29 GY28-6800

36 GY30-2005
36 GY28-6775
36 GY28-6775
36 GY28-6776
30
36
36
36

GY28-6618
GY28-6613
GY28-6660
GY28-6775

30 GY28-6616
36 GY28-6605

DSNAMAR field in E01DATDF
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
Dsname,
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
length of
location of
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776

Ii]

DSNAME -

134

Dual

DSNAME
in MVT JOB MANAGEMENT.
in TSO COMMAND PROCESSOR VOL4-HELP
as the search argument
location
overriding of
in TSO TMP & SERVICE ROUTINES
parameter type
DSNAME. in PDL
in TSO COMMAND PROC VOL5-0UTPUT
Dsname. to be searched on in DSE
in TSO COMMAND PROC VOL4-LISTBC
DSNAME parameter
in CONTROL PROGRAM WITH MFT
Dsname pointer
in TSO COMMAND PROC VOL6-PROTECT
DSNAME table
in JOB MANAGEMENT
DSNAMES
in TSO COMMAND PROCESSOR VOL4-FREE
being processed
PDE for
DSNAMEl
in TSO COMMAND PROC VOL6-RENAME
constructed by IKJPARS
flowchart
format
M.O. diagram
DSNAME2
in TSO COMMAND PROC VOL6-RENAME
constructed by IKJPARS
flowchart
format
M.O. diagram

DSOCB
in CONTROL PROGRAM WITH MFT
36 GY28-6770
36 GY28-677S

36 GY27-7128
36 GY28-6776
36 GY28-6613
36 GY28-6774

36 GY28-6776

DSORG. indicator (DA24DSO)
TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774

DSPTCH-IEKCDP
---rn-FORTRAN IV (H) COMPILER

25 GY28-6642

DSRATE label, processing at
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
DSREQ subroutine
in TSO COMMAND PROC VOL2-ALLOCATE
flowchart
function
operation
DSREQEND subroutine
in TSO COMMAND PROC VOL2-ALLOCATE
function
operation

36 GY28-6776

36 GY28-6776

DSNRTE. routine flowchart
---rn-TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
DSNRTE routine name
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
in flowchart
in method of operation diagram
DSNRTE subroutine
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY28-6772
flowchart
function
operation
36 GY27-7128
36 GY28-6660

36 GY28-6772

36 GY28-6772

2S GY28- 6601

DSTHING
in TSO TMP & SERVICE ROUTINES
parameter type

36 GY28-6770

DS1LSTAR field
in SEQUENTIAL ACCESS METHODS

30 GY28-6604

DS1NOEPV field
in SEQUENTIAL ACCESS METHODS

30 GY28-6604

DS2
in INDEXED SEQUEN. ACCESS METHOD

DSOBTAIN routine

36 GY27-7128

---rn

DSRN
in FORTRAN IV (E)

DSNPDE
in TSO COMMAND PROC VOL6-SUBMIT
36 GY28-6776
description
use
DSNPDE, field in RUN PDL
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
DSNPDE. IKJPARS descriptor element
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
format of
DSNPDE (data set name parameter descriptor
element)
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
description
used by IKJEFGOO
DSNPDE (PDE for DSNAME)
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774

DSO
---in CONTROL PROGRAM WITH MFT
DSO environment check routine
in MVT JOB MANAGEMENT

36 GY28-6775

36 GY28-6774

DSNARLNG field in E01DATDF
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
DSNBUF, subfield name in DAIRSTOR
---rn-TSO COMMAND PROCESSOR VOL6-RUN

in TSO COMMAND PROC VOLS-LISTCAT
use of (diagram 2-4)

36 GY28-6660
36 GY28-6774

DTATBL (data attribute table)
---rn-TSO COMMAND PROCESSOR VOL1-ADD
data area
in directory

30 GY28-6618
36 GY28-6771

DTAxxxxx. fields in DTATBL
in TSO COMMAND PROCESSOR VOL1-ADD

36 GY28-6771

DTCEND
---rn-COBOL-TO-PL/l LCP

29 GY33-7007

DTPRO
in FORTRAN IV-TO-PL/l LCP

29 GY33-7000

DTSP
in PL/I (F) COMPILER

29 GY28-6800

DTSPC
in PL/I (F) COMPILER

29 GY28-6800

DTSW
---rn COBOL-TO-PL/l LCP

29 GY33-7007

Dual characters
---rn EMULATOR FOR 7090/7094/709411
definition
translation on input
translation on output
Dual Command routine (IITDXL)
in EMULATOR FOR 7090/7094/709411
Dual conversion option
in EMULATOR FOR 7090/7094/709411
definition
effect of

3S GY27-7187

3S GY27-7187
35 GY27-7187

135

---rn TSO COMMAND

DUCLS, field in DPLB
PROC VOL1-DELETE

36 GY28-6771

DUCLSF1, field in DPLB
in TSO COMMAND PROC VOLl-DELETE

36 GY28-6171

DUFLOC, field in DPLB
---rn-TSO COMMAND PROC VOLl-DELETE

36 GY28-6171

DUIDL
---rn
TSO COMMAND

36 GY28-6171

PROC VOL1-DELETE
building of
data area
in TSO COMMAND PROCESSOR VOL1-CHNG
data area
in directory
DUIDL (DSECT userid data list)
in TSO COMMAND PROCESSOR VOL1-ACCT
as input to SYS1.BRODCAST
processor
created by subcommand processors
fields in
pointer to in ARESP field of
ACCTPL
size of
DUIDL (userid data list)
in TSO COMMAND PROC VOL1-BROADCAST
fields in
pointer to
size of
use in MAIL directory processing
for ADD function
for DELETE function
for CHANGE function
in TSO COMMAND PROCESSOR VOL1-ADD
data area
in directory
in introduction

DUMGEN routine
---rn-COBOL (F)
Dummy
in TSO COMMAND PROC VOL1-DELETE
chaining flag
deleting failure
offset control flags
sublevel offset
USERID deletion
userid offset block
Dummy argument (*)
in PL/I SYNTAX CHECKER PLM
in Dimension attribute
in string attributes
in subscript expressions
Dummy arguments
in FORTRAN IV (H) COMPILER
in PL/I (F) COMPILER
chamelons
when created
DullllllY array
in FORTRAN IV (G) COMPILER
DullllllY bound specifier
in PL/I SYNTAX CHECKER PLM
DullllllY buffer format (Phase F8)
in ASSEMBLER (F)
Dummy CST
in EMULATOR FOR 7090/7094/709411
Dummy dataset,.
in TSO COMMAND PROCESSOR VOL4-EXEC
interface routine
parameter block
return
Dummy data set indicator
in TSO COMMAND PROC VOL2-ALLOCATE
DllIlIIlIY Data Set Processor

36 GY28-6171

36 GY28-6171

36 GY28-6771

36 GY28-6771

24 GY28-6382
36 GY28-6771

29 GY33-8009

25 GY28-6642
29 GY28-6800

25 GY28-6638
29 GY33-8009
21 GY26-3700
35 GY27-7187
36 GY28-6174

DUCLS - DUMP
in MVT SUPERVISOR
36 GY28-6659
DuIlllllY data set request
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6172
Dummy data set routine (IGG019AV)
in SEQUENTIAL ACCESS METHODS
30 GY28-6604
Dummy dictionary reference
in PL/I (F) COMPILER
29 GY28-6800
DuIlllllY dimension
in FORTRAN IV (G) COMPILER
25 GY28-6638
Dummy dimension bound
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
Dummy DSECT. external
in LOADER
31 GY28-6714
Dummy generation number
in CATALOG MANAGEMENT
30 GY28-6606
in TSO CATALOG MANAGEMENT
36 GY28-6745
Dummy inactive record
in TSO COMMAND PROC VOL4-LISTBC
36 GY28-6174
Dummy index entries
in INDEXED SEQUEN. ACCESS METHOD
30 GY28-6618
creation
format
Dummy partition queue element (DPQE)
in MVT SUPERVISOR
36 GY28-6659
construction of
format of
Dummy program request block
(PRB)
in MFT SUPERVISOR
36 GY27-7236
ATTACH and
LINK and
Dummy record
in BASIC DIRECT ACCESS METHOD
30 GY28-6617
key and data fields
Dummy reference. in second file
in PL/I (F) COMPILER
29 GY28-6800
Dummy references. in text
in PL/I (F) COMPILER
29 GY28-6800
Dummy request block for the system error
task
in MVT SUPERVISOR
36 GY28-6659
Dummy sequences
in SORT/MERGE
33 GY28-6597
Dummy subscripted variables
in FORTRAN IV (E)
25 GY28-660l
subscript optimization processing of
Dummy TCB table
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
Dummy text record
in LINKAGE EDITOR (F)
31 GY28-6667
Dummy tracing routine (1130)
in S/360-1130 DATA TMN. - FORTRAN 25 GY27-7161
Dummy variable
in ALGOL-TO-PL/l LCP
29 GY33-7006
Dummy variable (ISUB)
in PL/I SYNTAX CHECKER PLM
29 GY33- 8009
in constants
in expressions (IKM133)
Dump
in FORTRAN IV (H) COMPILER
in MFT SUPERVISOR
data set
indicative
in MVT SUPERVISOR
sample
in PL/I (F) COMPILER
of-' dictionary
on SYSPRINT
in PL/I SUBROUTINE LIBRARY
object-time
PL/I
read subroutines

25 GY28-6642
36 GY27-7236
36 GY28-6659
29 GY28-6800
29 GY28-680l

DUMP

36 GY28-6772

in PL/I (F) COMPILER
option

29 GY28-6800

~

DUMP - DyDamic

DUMP
I in PL/I (F) COMPILER
29 GY28-6800
L--------------------------------------(continued)
parameter
Dump (to obtain)
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Dump change list
37 GY28-6611
in TESTRAN
Dump change table
37 GY28-6611
in TESTRAN
DUMP Command Processor (IIODUMP)
in 7074 EMULATE FOR M/165
GY27-7228
flowchart
function
MOD
Dump Command routine (IITDP)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
Dump data set
in MVT SUPERVISOR
36 GY28-6659
determining whether to open
ensuring that the dump data set remains
open for the duration of the job step
indicating whether the dump data set has
been opened
preparing to open
Dump index
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Dump macro-instruction
in TESTRAN
37 GY28-6611
Dump mode
in CRJE PLM
36 GY30-2011
DUMP option, effect on SIZE option
in PL/I (F) COMPILER
29 GY28-6800
Dump reading
36 GY28-6776
in TSO COMMAND PROC VOL6-RENAME
Dump routines
in TSO CONTROL PROGRAM
36 GY28-7199
Dump routines, editor
in TESTRAN
37 GY28-6611
dump changes
dump comment
dump data
dump map
dump panel
dump table
Dump routines" interpreter
in TESTRAN
37 GY28-6611
dump comment
dump data, dump changes
dump map
dump panel
dump table

136
in UTILITIES
Dumping direct access volumes
in UTILITIES
Dumps
in EMULATOR FOR 7090/7094/709411
information in emulator
obtaining
in MVT SUPERVISOR
Dumps, obtaining
in 7074 EMULATE FOR M/165

32 GY28-6614
32 GY28-6614
35 GY27-7187
36 GY28- 6659
GY27-7228

DUMP15-IEKLER
---rn-FORTRAN IV (H) COMPILER

25 GY28- 6642

---rn

DUMP3 Command routine (IITDP3)
EMULATOR FOR 7090/7094/709411

35 GY27-7187

DUMP9 Command routine (IITDP9)
in EMULATOR FOR 7090/7094/709411

35 GY27-7187

DUOFxxx, field in DPLB
in TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

Duplicate-header message that spans
queue-type
in TELECOMMUNICATION ACCESS METHOD
Duplicate-header messages
in TELECOMMUNICATION ACCESS METHOD
Duplicate name search
in DIRECT ACCESS DEVICE SPACE MGT.
Allocate routine
Extend routi ne
ISAM data set
Duplicate records
in INDEXED SEQUEN. ACCESS METHOD
error indications
processing

30 GY30-2029
30 GY30-2029
30 GY28-6607

30 GY28-6618

Duplication factor
in TESTRAN

37 GY28-6611

DUSxxxx" field in DPLB
in TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

DVD
in PL/I (F) COMPILER
DVD (Dope Vector Descriptor)
in PL/I SUBROUTINE LIBRARY
DVD structure
in PL/I SUBROUTINE LIBRARY

29 GY28-6800
29 GY28-6801
29 GY28-6801

DXD

Dumping
in MVT SUPERVISOR
36 GY28-6659
contents directory entries
data extent blocks (DEBs)
dynamically acquired storage
extent lists
load modules represented by CDEs
main storage queue elements
nucleus of main storage
old PSW
problem-program register save areas
QCBs,. QELs, and save areas belonging to
IRBs
register contents
request blocks
storage acquired for the task
task I/O table (TIOT)
task's load list
TCB
trace table
Dumping" inter-phase
in PL/I (F) COMPILER
29 GY28-6800
Dumping a volume

- i n ASSEMBLER (F)

21 GY26-3700

Qy namic Device Reconfiguration (DDR)
in EMULATOR FOR 7090/7094/709411
Dynamic Allocaiton Interface Routine
(DAIR), definition
in TSO COMMAND PROCESSOR VOLl-ADD
Dynamic allocation
in MVT JOB MANAGEMENT
CONCAT function
control routine
convert routine
construction of SlOT and FJCB
data set function
DCB updating
DECONCAT function
disposition processing
DSE update function
ENQ/DEQ parameter list
function codes
interface routine (DAIR)
module list

35 GY27-7187

36 GY28-6771
36 GY28-6660

137

Dynamic allocation
I in MVT JOB MANAGEMENT
36 GY28-6660
L--------------------------------------(continued)
routine size limit
SVC 99
unallocate function
use of DADSM SVC 32
use of SlOT
use of SVC 3
use of TIOT
use of XCTL macro instruction
user parameter list
work table (DAWT)
in TSO COMMAND PROC VOL1-BROADCAST 36 GY28-6771
error analysis of
parameter block for
parameter list for
Dynamic allocation interface routine
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY28-6772
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
definition
parameter block
parameter list
used
Dynamic Allocation Interface Routine (DAIR)
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
definition
in TSO COMMAND PROC VOL4-LISTALC
36 GY28-6774
in TSO COMMAND PROC VOL4-LISTBC
36 GY28-6774
allocate SYS1.BRODCAST
function
parameter list received (DAPL)
return code
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
definition
required by LISTDS
return code indicator
used after LOCATE
in TSO COMMAND PROC VOL6-PROFILE
36 GY28-6776
in TSO COMMAND PROC VOL6-PROTECT
36 GY28-6776
definition
36 GY28-6776
in TSO COMMAND PROC VOL6-RENAME
called by IKJEHREN
definition
flowchart
M.O. diagram
use
in TSO COMMAND PROC VOL6-TERMINAL 36 GY28-6776
definition
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-677l
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-677l
definition
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
definition
function
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
definition
interface subroutine (IKJEFD20)
flowchart
parameter list
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
driving mechanism
entry code
error messages
error message routine (IKJEFF18)
load module (IKJDAIR)
parameter list (DAPL)
parameter block (DAPB24)
parameter block,. address
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
definition
entry code in DAPB04
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
definition

Dynamic - Dynamic
in TSO COMMAND PROCESSOR VOL6-TIME 36
in TSO TMP & SERVICE ROUTINES
36
description
functions
hierarchy
operation
parameters
register usage
return codes
Dynamic Allocation Interface routine
(IKJDAIR)
in TSO COMMAND PROC VOL5-LISTCAT
36
description of
use of
in TSO COMMAND PROCESSOR VOL1-ACCT 36
Dynamic Allocation Interface Routine
Parameter list
in TSO COMMAND PROCESSOR VOL4-EXEC 36
Dynamic allocation interface routine
parameter list (DAPL)
in TSO COMMAND PROC VOL5-LISTDS
36
format
in data area directory
Dynamic allocation of storage
in INTRO. TO CONTROL PROGRAM LOGIC 36
Dynamic Allocation Parameter Blocks
in TSO TMP & SERVICE ROUTINES
36
format
code X'OO'
code X'Ol'
code X'02'
code X'03'
code X'04'
code X'06'
use
Dynamic allocation parameter list
in TSO COMMAND PROCESSOR VOL1-ACCT 36
Dynamic Allocation Parameter List (DAPL)
in TSO COMMAND PROC VOL6-PROTECT
36
definition
in data area directory
in TSO COMMAND PROC VOL6-RENAME
36
construction by IKJEHREN
flowchart
format
M.O. diagram
use by IKJDAIR
Dynamic allocation return code
in TSO COMMAND PROC VOL6-PROTECT
36
in DAPB18
Dynamic allocation return codes
in TSO COMMAND PROC VOL2-ALLOCATE 36
Dynamic Allocation routines (SVC 99)
in TSO TMP & SERVICE ROUTINES
36
description
functions
hierarchy
operation
parameters
return codes
Dynamic area
in INITIAL PROGRAM LOADER AND NIP 36
MFT
MVT
MVT with Model 65 multiprocessing
in MFT SUPERVISOR
36
contents of
Dynamic area of storage
in INTRO. TO CONTROL PROGRAM LOGIC 36
definition of
use of
Dynamic BSAM DCB entry
in TSO COMMAND PROC VOLl-DELETE
36
in TSO COMMAND PROCESSOR VOL1-CHNG 36
Dynamic buffer allocation
in TELECOMMUNICATION ACCESS METHOD 30

GY28-6776
GY28-6770

GY28-6775
GY28-6771
GY28-6774
GY28-6775

GY28-6605
GY28-6770

GY28-677l
GY28-6776
GY28-6776

GY28-6776
GY28-6772
GY28-6770

GY28-666l

GY27-7236
GY28-6605

GY28-677l
GY28-677l
GY30-2029

II[i]

138

Dynamic - EBPRT
Dynamic buffer module
in BASIC DIRECT ACCESS METHOD
Dynamic buffer queue
in BASIC DIRECT ACCESS METHOD
Dynamic buffering
in BASIC TELECOMM. ACCESS METHOD
description
logic flow
Read/Write CCWs
Dynamic buffering option
in BASIC DIRECT ACCESS METHOD
Dynamic buffering routine--BISAM
in INDEXED SEQUEN. ACCESS METHOD
description
control block
flow diagram
initialization
pointers to
Dynamic communications
in ONLINE TEST EXECUTIVE PROGRAM
Dynamic communications buffer
in ONLINE TEST EXECUTIVE PROGRAM
Dynamic data set allocation
in MVT JOB MANAGEMENT
Dynamic defining
in PL/I (F) COMPILER
Dynamic device configuration
in INITIAL PROGRAM LOADER AND NIP
Dynamic Device
Reconfiguration
in MFT SUPERVISOR
in MVT SUPERVISOR
description of
error routine fetch processing
Dynamic device reconfiguration (DDR)
in CONTROL PROGRAM WITH MFT
in MVT JOB MANAGEMENT
Dynamic device relocation
in INPUT/OUTPUT SUPERVISOR
Dynamic dump
in PL/I (F) COMPILER
Dynamic PCL, base for
in TSO COMMAND PROCESSOR VOL1-ADD
Dynamic storage
in PL/I SUBROUTINE LIBRARY
in TSO COMMAND PROC VOL4-LISTBC
in TSO COMMAND PROCESSOR VOL6-TIME
Dynamic Storage Area (DSA)
in PL/I (F) COMPILER
optimization
tasking information
in PL/I SUBROUTINE LIBRARY
Dynamic storage area (DSA) definition
in PL/I SUBROUTINE LIBRARY
Dynamic storage area (DSA) format
in PL/I SUBROUTINE LIBRARY
Dynamic storage requirements
in TSO COMMAND PROCESSOR VOL1-ADD
Dynamic storage used
in TSO COMMAND PROC VOL1-DELETE
in TSO COMMAND PROC VOL2-ALLOCATE
in TSO COMMAND PROCESSOR VOL1-CHNG
Dynamic text buffer chains
in FORTRAN IV (E)
Dynamic translation routine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
Dynamically acquired storage
in TSO COMMAND PROC VOL6-PROFILE

in ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

in PL/I SYNTAX CHECKER PLM

29 GY33-8009

in COBOL (E)

24 GY24-5009

D6PN10 routine
in COBOL (F)

24 GY28-6382

-rnCOBOL

D6RL20 routine
(F)

24 GY28-6382

D6SR10 routine
~COBOL (F)

24 GY28-6382

D6000 routine
in COBOL (F)

24 GY28- 6382

30 GY28-6617
30 GY28-6617
30 GY30-2001

D32

30 GY28-6617
30 GY28-6618

37 GY28-6651
37 GY28-6651
36 GY28-6660
29 GY28-6800
36 GY28-6661
36 GY27-7236
36 GY28-6659

36 GY27-7128
36 GY28-6660
30 GY28-6616
29 GY28-6800

£! format
in FORTRAN IV-TO-PL/l LCP
E- format code
in FORTRAN IV-TO-PL/l LCP
E,G,H levels of Fortran
in FORTRAN IV SYNTAX CHECKER PLM
as input to syntax checker
E-Reg parity error
in MACHINE-CHECK HANDLER, s360 M65
E-Text
in COBOL (F)
definition
formats
E.nnnn (Report Writer data name)
in COBOL (F)

29 GY33-7000
29 GY33-7000
25 GY28-6831
31 GY27-7155
24 GY28-6382

24 GY28-6382

EACTBL table

~COBOL

(F)

24 GY28-6382

36 GY28-6771
EADA12

29 GY28-6801
36 GY28-6774
36 GY28-6776

~COBOL-TO-PL/l LCP

29 GY33-7007

EADA2
in COBOL-TO-PL/l LCP

29 GY33-7007

29 GY28-6800
EALIGN

~COBOL

(E)

24 GY24-5009

29 GY28-6801
EAVOID-ECONDl

29 GY28-680l

~COBOL (E)

24 GY24-5009

29 GY28-6801

EBACK
in COBOL (E)

24 GY24-5009

36 GY28-6771
EBCDIC

36 GY28-6771
36 GY28-6772
36 GY28-6771
25 GY28-6601
30 GY30-2029

~ALGOL-TO-PL/l LCP

29 GY33-7006
37 GY28-6651
in ONLINE TEST EXECUTIVE PROGRAM
conversion of
transla tion of
in TESTRAN
37 GY28-6611
EBCDIC format data, translation to column
binary
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
EBCDIC representation
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
EBCDIC to Column Binary Translation routine
(IITUREBC)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187

36 GY28-6776
EBPRT subroutine, function of
S/360 JOB PROCESSING 1130/2250

---rn

36 GY27-7166

139
ECB
in BASIC TELECOMM. ACCESS METHOD
in GRAPHICS ACCESS METHOD
in INDEXED SEQUEN. ACCESS METHOD
in INTRO. TO CONTROL PROGRAM LOGIC
in JOB MANAGEMENT
in MVT SUPERVISOR
in ONLINE TEST EXECUTIVE PROGRAM
in glossary
in operation diagram
in TELECOMMUNICATION ACCESS METHOD
in TSO COMMAND PROC VOL6-PROTECT
in TSO COMMAND PROC VOL6-RENAME
in TSO COMMAND PROC VOL6-TERMINAL
in TSO COMMAND PROCESSOR VOL1-ACCT
in TSO COMMAND PROCESSOR VOL2-CALL
CALL
pointers to
used by STOP/MODIFY
in TSO COMMAND PROCESSOR VOL6-RUN
ECB., ACCOUNT
in TSO COMMAND PROCESSOR VOL1-LIST
in ACCTPLIST
in CTAB
in PLPLIST
in PPL
STOP/MODIFY
ECB, address of
in TSO COMMAND PROCESSOR VOL4-FREE
command processor
cOlllIlllnications
ECB, pointer to
in TSO COMMAND PROC VOL2-DELETE
in TSO COMMAND PROC VOL6-WHEN/END
in TSO COMMAND PROCESSOR VOL1-CHNG
ECB, points to
in TSO COMMAND PROCESSOR VOL1-ADD
ECB (event control block)
in INPUT/OUTPUT SUPERVISOR
channel end status
in data area directory
data area layout
defined in glossary
in PL/I SUBROUTINE LIBRARY
in TSO COMMAND PROC VOL4-LISTBC
passed in DAPL
passed in IOPL
passed in PPL
in TSO COMMAND PROC VOL6-PROFILE
in TSO COMMAND PROCESSOR VOL6-TIME
ECB (Event Control Block)., use in
subsystem communication
in TSO CONTROL PROGRAM
ECB (event control block) pointers"
description of
in TSO COMMAND PROCESSOR VOL7-TEST
ECBLOG
ECBPP
ECBTERM
ECBTMPA
ECBTMPS
ECBTST
ECB-IEBTCRIN
in UTILITIES
ECB/IOB
in MVT JOB MANAGEMENT
freeing of
in TSO COMMAND PROC VOL5-0UTPUT
ECB list
in CRJE PLM
in GRAPHIC JOB PROCESSOR SUPPORT
format of
construction of
ECB list for GFX
in S/360 JOB PROCESSING 1130/2250
definition of

30
30
30
36
36
36
37

GY30-2001
GY27-7113
GY28-6618
GY28-6605
GY28-6613
GY28-6659
GY28-6651

30
36
36
36
36
36

GY30-2029
GY28-6776
GY28-6776
GY28-6776
GY28-6771
GY28-6772

36 GY28-6776
36 GY28-6771

36 GY28-6774

ECB -

format of
construction of
ECBADD, field in PLPLIST
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
ECBBITS, field in in CPECB
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

ECBBITO, field in CPECB
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

ECBBIT1, field in in CPECB
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

---yo

ECBCC, field in CPECB
TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

ECBLIST (list of PECB's)
in PL/I SUBROUTINE LIBRARY

29 GY28-6801

ECBPTR, field of PARMLSTS
in TSO COMMAND PROC VOL5-LISTDS
ECBPTR field in PARMLSTS
in TSO COMMAND PROC VOL4-LISTALC

36 GY28-6771
30 GY28-6616

29 GY28-6801
36 GY28-6774

36 GY28-6776
36 GY28-6776
36 GY28-7199
36 GY28-6777

32 GY28-6614
36 GY28-6660
36 GY28-6775
36 GY30-2011
36 GY27-7159

36 GY27-7166

36 GY28-6775
36 GY28- 6774

ECBS, posting of for Mainline
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
causes and resultant processing
ECBxxxx, field in ACCTECB
in TSO COMMAND PROC VOLl-DELETE

36 GY28-6772
36 GY28-6776
36 GY28-6i71

BC'r

ECC (Error Checking and
Correction)
in MACHINE-CHECK HANDLER, M135/145
successful
validity checking
ECC (Error Correction Code)
in MACHINE-CHECK HANDLER, S360 M85
function and operation
ECC (Error Correction Codes)
in MACHINE-CHECK HANDLER, M155/165
ECC-corrected error (single-bit
error)
in MACHINE-CHECK HANDLER, s360 M85
ECC parameter of MODE command
in MACHINE-CHECK HANDLER, M155/165

36 GY28-6771

30 GY27-7237

31 GY27-7184
30 GY27-7198
31 GY27-7184
30 GY27-7198

ECE
- - i n ALGOL-TO-PL/l LCP

29 GY33-7006

ECMP ('complete bit')
in PL/I SUBROUTINE LIBRARY

29 GY28-6801

ECT
- - i n TSO COMMAND PROC VOL1-BROADCAST
in TSO COMMAND PROC VOL4-LISTBC
in TSO COMMAND PROC VOL5-0PERATOR
j,n data area directory
data area
pointer to
in TSO COMMAND PROC VOL6-PROFlLE
in TSO COMMAND PROC VOL6-PROTECT
in TSO COMMAND PROC VOL6-RENAME
in TSO COMMAND PROC VOL6-TERMlNAL
in TSO COMMAND PROC VOL6-WHEN/END
data area
in data area directory
pointer to
in TSO COMMAND PROCESSOR VOL3-EDIT
in TSO COMMAND PROCESSOR VOL4-HELP
in TSO COMMAND PROCESSOR VOL6-RUN
in TSO TMP , SERVICE ROUTINES
ECT, data area
in TSO COMMAND PROC VOL1-DELETE

36 GY28-6771
36 GY28- 6774
36 GY28-6775

36
36
36
36
36

GY28-6776
GY28- 6776
GY28-6776
GY28- 6776
GY28-6776

36
36
36
36

GY28- 6773
GY28-6774
GY28- 6776
GY28-6770

36 GY28-6771

iii

D

BC'r -

140

BDX'l'

ECT., pointer to
in TSO COMMAND PROC VOL2-DELETE
in TSO COMMAND PROCESSOR VOL1-CHNG
ECT., pointers to
in TSO COMMAND PROCESSOR VOL2-CALL
ECT {Environment Control Table)
in TSO COMMAND PROCESSOR VOL1-LIST
in ACCTPLST
in CTAB
in PLPLIST
in PPL
in TSO COMMAND PROCESSOR VOL6-TIME
in TSO COMMAND PROCESSOR VOL7-TEST
format of
in TSO CONTROL PROGRAM
format of
initialization of
ECT address
in TSO COMMAND PROCESSOR VOL4-FREE
in CPPL
in IOPL
in SERTEPRM
ECT switches
in TSO COMMAND PROC VOL5-0PERATOR
ECTAD, field in PARMLIST
TSO COMMAND PROCESSOR VOL1-ADD

---rn

36 GY28-6772
36 GY28-6771
36 GY28-6772
36 GY28-6771

36 GY28-6776
36 GY28-6777
36 GY28-7199

36 GY28-6774

ECTIOWA
---rn'fSO COMMAND PROC VOL6-WHEN/END
field in ECT
ECTIOWA" field in ECT
in TSO COMMAND PROC VOL5-0PERATOR
ECTLOGF" field in ECT
in TSO COMMAND PROC VOL5-0PERATOR
ECTMSGF
in TSO COMMAND PROC VOL6-WHEN/END
field in ECT
ECTMSGF, field in ECT
in TSO COMMAND PROC VOL5-0PERATOR
ECTNMAL
in TSO COMMAND PROC VOL6-WHEN/END
field in ECT
ECTNMAL" field in ECT
in TSO COMMAND PROC VOL5-0PERATOR
ECTNNOT
in TSO COMMAND PROC VOL6-WHEN/END
field in ECT
ECTNNOT" field in ECT
in TSO COMMAND PReC VOL5-0PERATOR
ECTNOPD
in TSO COMMAND
field in ECT
ECTNOPD~ field in
in TSO COMMAND
ECTNOPD bit
in TSO COMMAND

36 GY28-6771

36 GY28-6776

ECTRCDF
in TSO COMMAND PROC VOL6-WHEN/END
field in ECT
ECTRCDF, field in ECT
in TSO COMMAND PROC VOL5-0PERATOR
ECTRTCD
in TSO COMMAND PROC VOL6-WHEN/END
field in ECT
ECTRTCD, field in ECT
in TSO COMMAND PROC VOL5-0PERATOR
ECTSCMD
in TSO COMMAND PROC VOL6-WHEN/END
field in ECT
ECTSCMD, field in ECT
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6776
36 GY28-6775
36 GY28-6776
36 GY28-6775
36 GY28-6776
36 GY28-6775

ECTSMSG
in TSO COMMAND PROC VOL6-WHEN/END
field in ECT
ECTSMSG, field in ECT
in TSO COMMAND PROC VOL5-0PERATOR
ECTSWS
in TSO COMMAND PROC VOL6-WHEN/END
field in ECT
ECTSWS, field in ECT
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6776
36 GY28-6775
36 GY28-6776
36 GY28-6775

36 GY28-6775
36 GY28-6776
36 GY28-6775
36 GY28-6775
36 GY28-6776
36 GY28-6775
36 GY28-6776
36 GY28-6775
36 GY28-6776
36 GY28-6775

PROC VOL6-WHEN/END

36 GY28-6776

ECT
PROC VOL5-0PERATOR

36 GY28-6775

PROC VOL6-PROFILE

36 GY28-6776

ECTPCMD
in TSO COMMAND PROC VOL6-WHEN/END
field in ECT
ECTPCMD" field in ECT

ECTPTR, field in ACCTPLST
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

36 GY28-6775

ECTADD" field in PLPLIST
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
ECTATRM
in TSO COMMAND PROC VOL6-WHEN/END
field in ECT
ECTATRM., field in ECT
in TSO COMMAND PReC VOL5-0PERATOR

in TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6775
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774

36 GY28-6776

ECTxxx fields in PUTPL
---rn-TSO COMMAND PROCESSOR VOL6-TlME 36 GY28-6776
ECTxxxx., field in ECT
in TSO COMMAND PROC VOL1-DELETE
36 GY28-677lJ
EDIT, DELETE, and EXEC command processor
---rn CRJE PLM
36
entry point code
flowchart
messages requested
microfiche directory
module description
register usage
Edit, sample
in TESTRAN
37
EDIT (keyword option)
in PL/I SYNTAX CHECKER PLM
29
for GET statement
data-list
format-list
option flags
subroutine OPTT3 (IKM21)
for PUT statement
data-list
format-list
option flags
subroutine OPTT4 (IKM21)
EDIT access method
in TSO COMMAND PROCESSOR VOL3-EDIT 36
definition
operation of
EDIT connnand
in FORTRAN IV SYNTAX CHECKER PLM
25
FORT parameter of
SCAN subcommand of
in TSO COMMAND PROCESSOR VOL3-EDIT 36
proper syntax of
validation of operands
EDIT connnand, description of
use

GY30-2011

GY28-6611
GY33-8009

GY28-6773

GY28-6831
GY28-6773

141
EDIT command, description of
luse
L--------------------------------------(continued)
in TSO CONTROL PROGRAM
36 GY28-7199
EDIT command processor
in CRJE PLM
36 GY30-2011
entry point code
flowchart
messages requested
microfiche directory
module description
register usage
Edit control block-IEBGENER
in UTILITIES
32 GY28-6614
Edit data set
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
allocation of
definition
use of
Edit-directed compiled code
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Edit-directed data specification
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Edit-directed input/output
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Edit mode
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
change of mode to
definition of
initial selection of
Edit module-IFCEREPO (165)
in UTILITIES
32 GY28-6614
EDIT option
in FORTRAN IV (H) COMPILER
25 GY28-6642
in FORTRAN IV-TO-PL/1 LCP
29 GY33-7000
EDIT program
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
access method
controller
error and exceptional conditions
processing
abnormal end and attention exits
establishing mode of operation
handling attention interrupt
invoking EDIT subcommand
obtaining EDIT subcommand
SCAN processing
termination processing
validating an EDIT subcommand
verify message handling
error and attention exit routines
error termination of the EDIT program
initialization
data set type, prompting for
error and exceptional conditions
operand processing
BLOCK keyword
CAPS/ASIS keyword
data set name
GOFORT data set type
LINE keyword and keyword value
NEW/OLD keyword
NUM/NONUM keyword
PLI or PLI/F source margins
SCAN/NOSCAN keyword
processor-dependent information,
obtaining
summary of operations
termination processing
service routines
subcommand processors
BOTTOM
CHANGE
DELETE
DOWN
END

EDIT - Editor

FIND
FORMAT
HELP
INPUT
INSERT
Line Insert/Replace/Delete
LIST
MERGE
PROFILE
RENUM
RUN
SAVE
SCAN
TABSET
TOP
UP
VERIFY

Edit routine
in TESTRAN
Edit routine (IECTEDIT)
in BASIC TELECOMM. ACCESS METHOD
logic flow
EDIT service routines
in TSO COMMAND PROCESSOR VOL3-EDIT
BASIC renum
command invoker
data set allocation
final copy
initial copy
line edit
message selection
processor data set search
string search
translation
EDIT session
in TSO COMMAND PROCESSOR VOL3-EDIT
definition
EDIT subcommands
in CRJE PLM
in TSO COMMAND PROCESSOR VOL3-EDIT
invoking processors for
obtaining of
processors syntax
validation of
Edit table entries-IFCEREPO (165)
in UTILITIES

37 GY28-6611
30 GY30-2001
36 GY28-6773

36 GY28-6773
36 GY30-2011
36 GY28-6773

32 GY28-6614

EDITFL

-----rn-PL/I

SYNTAX CHECKER PLM

Editing
in PL/I SUBROUTINE LIBRARY
Editing arithmetic
in PL/I SUBROUTINE LIBRARY
Editing OBRs and SORs
in UTILITIES
Editing of data-IEBPTPCH
in UTILITIES

29 GY33- 8009
29 GY28-6801
29 GY28-6801
32 GY28-6614
32 GY28-6614

Editor

-----rn-FORTRAN

:IV (E)
Edi tor, linkage
in TESTRAN
Editor, TESTRAN
in TESTRAN
Editor message routine
in TESTRAN
Editor router routine
in TESTRAN
Editor tables
in TESTRAN

25 GY28- 6601
37 GY28- 6611
37 GY28- 6611
37 GY28-6611
37 GY28-6611
37 GY28-6611

EDITSTERLXNG - Emulator
EDITSTERLING
in COBOL-TO-PL/1 LCP
EDOTMSG switch
in ONLINE TEST EXECUTIVE PROGRAM

H2

29 GY33-7000

EEND
in COBOL (E)

24 GY24-5009

EFCRP
in COBOL (E)

24 GY24-5009

Effector routines
in SEQUENTIAL ACCESS METHODS
COBOL (E)

EISUBFL (ISUB found flag)
in PL/I SYNTAX CHECKER PLM
ASSEMBLER (F)

Embedded blanks
in FORTRAN IV (E)
25 GY28-6601
elimination of in source statements
Embedded index requests
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
Embedded tapemarks
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
EMCH ('check bit')
----in PL/I SUBROUTINE LIBRARY

29 GY28-6801

21 GY26-3700

EMIN table
---rn FORTRAN IV (H) COMPILER

25 GY28-6642

Eminence table
in FORTRAN IV (H) COMPILER

25 GY28-6642

Emitter
in COBOL (E)

24 GY24-5009

EMODVOL1 (IGG0552V)
in INPUT/OUTPUT SUPPORT

30 GY28-6609

24 GY24-5009

Elapsed line
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
computation of
Elapsed time
in MFT SUPERVISOR
36 GY27-7236
determining
Element
in FORTRAN IV (E)
in arrays
in TCAM SERVICEABILITY AIDS
in TELECOMMUNICATION ACCESS METHOD
Element, input stack
in TSO COMMAND PROC VOL6-WHEN/END
Element control block
in QUEUED TELECOMM. ACCESS METHOD
Element request block (ERB)
in TELECOMMUNICATION ACCESS METHOD
Elementary Loop
in ALGOL (F) COMPILER
Elementary structure name
in PL/I SYNTAX CHECKER PLM
Elements of TCAM dispatcher
in TELECOMMUNICATION ACCESS METHOD

29 GY33-8009

29 GY33-8009

30 GY28-6604

EJECT

---rn

ELSLABFL
in PL/I SYNTAX CHECKER PLM

Emergency Recorder, IGFMCHE3
in MACHINE-CHECK HANDLER,
flowchart
module description
Emergency recorder module
(IGFMCHE3)
in MACHINE-CHECK HANDLER,
in MACHINE-CHECK HANDLER,
Emergency recording
in MACHINE-CHECK HANDLER,

35 GY27-7187

EFIGC

--rn

29 GY33-8009

37 GY28-6651

EDPRO
in FORTRAN IV-TO-PL/1 LCP

Effective address, 7094
in EMULATOR FOR 7090/7094/709411

in PL/I SYNTAX CHECKER PLM
29 GY33-7007

M135/145 30 GY27-7237

M135/145 30 GY27-7237
M155/165 30 GY27-7198
M135/145 30 GY27-7237

25 GY28-6601

30 GY30-2029

Empty buffer
in SEQUENTIAL ACCESS METHODS
Get routines
exchange buffering
simple buffering
Update mode
Put routines
exchange buffering
simple buffering
Update mode
EMPTY built-in function
in PL/I (F) COMPILER
Empty option
in CATALOG MANAGEMENT
in TSO CATALOG MANAGEMENT

ALGOL-TO- PL/1 LCP

29 GY33-7006

---rn

ELMASK (elementary name mask)
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

30 GY30-2027
30 GY30-2029
36 GY28-6776
30 GY30-2002
30 GY30-2029
26 GY33-8000
29 GY33-8009

ELEMl

---rn

ELSE
---rn ALGOL-TO-PL/1 LCP
29 GY33-7006
ELSE
in ALGOL-TO-PL/1 LCP
29 GY33-7006
ELSE - clause
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
conflict with label prefix
contents (ELSETAB)
ELSLABFL (conflict flag)
in IF statement
interrelation with other PL/I units
ELSE clause
in COBOL (F)
24 GY28-6382
ELSETAB (conflict table for ELSE)

EMSRV macro
EMULATOR FOR 7090/7094/709411

Emulated 7074 storage
in 7074 EMULATE FOR M/165
data representation in
description
reading into
writing out of
Emulation
in 70-74 EMUIATE FOR M/165
comparison with simulation
definition
purpose
Emulator
in EMULATOR FOR 7090/7094/109411
components
purpose
in 7074 EMUIATE FOR M/165

30 GY28-6604

29 GY28-6800
30 GY28- 6606
36 GY28-6745
35 GY27-7187
GY27-7228

GY27-7228

35 GY27-7187
GY27-72211

143
Emulator
I in 7074 EMULATE FOR M/165
GY27-7228
L--------------------------------------(continued)
definition
purpose
restrictions
Emulator Check routine (IITILKCH)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
description
flowchart
EMULATOR macro
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
Emulator mode
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
entry and exit
entry during initialization
Emulator program
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
general description
module descriptions
organization
relationship to compatibility
feature
relationship to operating
system
in 7074 EMULATE FOR M/165
GY27-7228
debugging
description
generating
initializing
moving 7074 data
Emulator program
in 7074 EMULATE FOR M/165
GY27-7228
overall operation
relationship
to compatibility feature
to operating system
routine descriptions
Emulator services routines
in 7074 EMULATE FOR M/165
GY27-7228
description
flowchart
MOD
Emulator System Writer (IITWTR94)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
Emulator Termination routine (IITEND)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
description
flowchart
EM7094 macro
---rn-EMULATOR FOR 7090/7094/709411

35 GY27-7187

EM74 macro instruction
---rn 7074 EMULATE FOR M/165
Enable, BISAM I/O interruptions
in INDEXED SEQUEN. ACCESS METHOD
30
Enable Channel Traps Instruction routine
(IITCHIEB)
in EMULATOR FOR 7090/7094/709411
35
description
flowchart
Enable hard errors
in MACHINE-CHECK HANDLER, M135/145 30
ENABLE parameter for MODE
command
in MACHINE-CHECK HANDLER" M155/165 30
Enabled
in TELECOMMUNICATION ACCESS METHOD 30
ENABLE.WD
in EMULATOR FOR 7090/7094/709411
35
format
use
Enablinq a line

GY27-7228
GY28-6618
GY27-7187

GY27-7237
GY27-7198
GY30-2029
GY27-7187

Emulator - End

in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Enabling module
in TCAM SERVICEABILITY AIDS
30 GY3Q-2027
entry
functions
ENATL
in GRAPHIC SUBRTN. PACKAGE

25 GY27-7152

ENATN
in GRAPHIC SUBRTN. PACKAGE

25 GY27-7152

Enclosinq lines, in syntax table
in FORTRAN IV SYNTAX CHECKER PLM

25 GY28-6831 ~

Encoded Verb Information
in COBOL (F)
Procedure IC-Text format
in ALGOL-TO-PL/1 LCP

24 GY28- 6382

29 GY33-7006

END
in
END;
in
in
in
in

ALGOL-TO-PL/1 LCP

ALGOL-TO-PL/1 LCP
ASSEMBLER (F)
COBOL (E)
LOADER
processing
processor (IE.WLEND)
flowchart of
synopsis of
record formats
END (keyword statement)
in PL/I SYNTAX CHECKER PLM
checking
subroutine END (IKM03)
END card
in ASSEMBLER (F)
in FORTRAN IV (G) COMPILER
omission of
produced by Exit
in PL/I (F) COMPILER
END card image
in FORTRAN IV (E)
generation of
in object module
END command handling routine
in EMULATOR FOR 7090/7094/709411
End command processing
in TSO COMMAND PROC VOL5-0PERATOR
END command processing
in TSO COMMAND PROC VOL6-WHEN/END
END Command Processor (IIOC3END)
in 7074 EMULATE FOR M/165
function
MOD
End communication routine
in s/360-1130 DATA TMN. - FORTRAN
in system/360 (IKDGTEND)
in 1130 system (GTEND)
End DO adjective code
in FORTRAN IV (E)
insertion of into intermediate
text
END Halt Command routine (IITEBT)
in EMULATOR FOR 7090/7094/709411
END-IEimEN
in FORTRAN IV (H) COMPILER
End index entries" format
in INDEXED SEQUEN. ACCESS METHOD
cylinder
master
tract
End insert routine
in QUEUED TELECOMM. ACCESS METHOD

29 GY33-7006
29
21
24
31

GY33-7006
GY26-3700
GY24-5009
GY28-6714

29 GY33-8009

21 GY26-3700
25 GY28-6638
29 GY28-6800
25 GY28-6601

35 GY27-7187
36 GY28-6775
36 GY28-6776
GY27-7228

25 GY27-7161

25 GY28-6601

35 GY27-7187
25 GY28-6642
30 GY28-6618

30 GY30-2002

144

End - End

chart
END key
in GRAPHIC SUBRTN. PACKAGE
25
END key,. processing attentions from
in GRAPHIC JOB PROCESSOR SUPPORT
36
END Key attention
in GRAPHICS ACCESS METHOD
30
End mark
in FORTRAN IV (E)
25
in intermediate text
End mark operator
in FORTRAN IV (H) COMPILER
25
End of address routine
in QUEUED TELECOMM. ACCESS METHOD 30
chart
End of block
in QUEUED TELECOMM. ACCESS METHOD 30
chart
End of block and line correction routine
in QUEUED TELECOMM. ACCESS METHOD 30
chart
End-of-block condition
in SEQUENTIAL ACCESS METHODS
30
Get routines
exchange buffering
simple buffering
Update mode
Put routines
exchange buffering
simple buffering
Update mode
in TSO COMMAND PROCESSOR VOL1-LIST 36
End-of-block routines
in SEQUENTIAL ACCESS METHODS
30
chained channel-program scheduling
Inout or Outin mode not used
Inout or OUt in mode used
introduction to
ordinary
track overflow
End-of-buffer (EOB) routine
30
in INDEXED SEQUEN. ACCESS METHOD
load mode
description
fields used
flow diagram
scan mode
description
flowchart
End of chain check
in TSO COMMAND PROC VOL1-DELETE
36
End-of-cylinder processing
30
in INDEXED SEQUEN. ACCESS METHOD
fields used
flowcharts
End of Data
in ALGOL (F) COMPILER
26
in MVT JOB MANAGEMENT
36
in TSO COMMAND PROCESSOR VOL4-HELP 36
in I:KJEFH01
in IKJEFH02
in IKJEFH03
End of data (EOD)
in TSO COMMAND PROCESSOR VOL4-EXEC 36
End-of-data condition
36
in JOB MANAGEMENT
End-of-data-set condition
in BASIC DIRECT ACCESS METHOD
30
End-of-definition-line routine
in FORTRAN IV SYNTAX CHECKER PLM
25
End of DO IF
in FORTRAN IV (H) COMPILER
25
End-of-extent

GY27-7152
GY27-7159
GY27-7113
GY28-6601
GY28-6642
GY30-2002
GY30-2002
GY30-2002
GY28-6604

GY28-6771
GY28-6604

GY28-6618

GY28-6771
GY28-6618

GY33-8000
GY28-6660
GY28-6774

GY28-6774
GY28-6613
GY28-6617
GY28-6831
GY28-6642

in SEQUENTIAL ACCESS METHODS
appendages
chained scheduling
i ntroducti on
normal scheduling
update
end-of-block routines
chained scheduling
normal scheduling
end -of -volume
End-of-extent appendage
in BASIC DIRECT ACCESS METHOD
in INPUT/OUTPUT SUPERVISOR
End-of-extent processing
in INDEXED SEQUEN. ACCESS METHOD
fields used
flowcharts
End-of-file
in EMULATOR FOR 7090/7094/709411
data channel traps
indicator
setting
in FORTRAN IV (H) COMPILER
in TCAM SERVICEABILITY AIDS
End-of-file (EOF) mark processing
in INDEXED SEQUEN. ACCESS METHOD
END-OF-FILE condition
in TSO COMMAND PROCESSOR VOL4-HELP
End-of-file indication
in PL/I (F) COMPILER
End-of-file on input
in SORT/MERGE
End-of-file situation-ATLAS
in UTILITIES
End-of-FORMAT statement indicator
in FORTRAN IV (E)
object-time encounter of
End-of-function
in ALGOL-TO-PL/1 LCP
End-of-job address
in EMULATOR FOR 7090/7094/709411
End-of-line signal
in PL/I SYNTAX CHECKER PLM
End-of-Iogical record indicator
in FORTRAN IV (E)
object-time encounter of
End-of-Ioop
in ALGOL-TO-PL/1 LCP
End of major task
in PL/I SUBROUTINE LIBRARY
End of module (EOM) indicator
in LINKAGE EDITOR (F)
description of
in control record
in END processing
in input load module
setting
End-of-object module indicator
in FORTRAN IV (E)
generation of
in object module
End-of-phase requests
in FORTRAN IV (E)
compile-time processing of
End-of-phase routine
in FORTRAN IV (E)
in interface module
in performance module
End of poll time delay routine
in QUEUED TELECOMM. ACCESS METHOD
chart
End-of-procedure
in ALGOL-TO-PL/1 LCP
End-of-program indication
in PL/I (F) COMPILER
count

30 GY28-6604

30 GY28-6617
30 GY28-6616
30 GY28-6618

35 GY27-7187

25 GY28-6642
30 GY30-2027
30 GY28-6618
36 GY28-6774
29 GY28-6800
33 GY28-6597
32 GY28-6614
25 GY28-6601
29 GY33-7006
35 GY27-7187
29 GY33-8009
25 GY28-6601
29 GY33-7006
29 GY28-6801
31 GY28-6667

25 GY28-6601

25 GY28-6601
25 GY28-6601

30 GY30-2002
29 GY33-7006
29 GY28-6800

145
End-of-program marker. in pseudo-code
phase
in PL/I (F) COMPILER
End of record
in TSO COMMAND PBOC VOL4-LISTBC
indicator
indicator character
End of segment (EOS) indicator
in LINKAGE EDITOR (F)
in control record
setting
End-of-statement characters
in PL/ I SYNTAX CHECKER PLM
End-of-statement indicator
in FORTRAN IV (E)
End-of-tape indicator
in EMULATOR FOR 7090/7094/709411
End-of-task
in MFT SUPERVISOR
system routine
user routine
End-of-Task (EOT) routine
in MVT SUPERVISOR
description of
entry point name(s) of
flowchart of
module name for
synopsis of
End-of-Task Exit routine (ETXR)
in MVT SUPERVISOR
scheduling 0:1;
J!,nd of testing
in ONLINE TEST EXECUTIVE PROGRAM
End-of-track processing
in INDEXED SE~UEN. ACCESS METHOD
fields used
flowcharts
End-of-TRM character
in TCAM SERVICEABILITY AIDS
End-of-volume (EOV)
in DIRECT ACCESS DEVICE SPACE MGT.
calling Extend routine
End-of-volume (EOV) on direct access
devices
in INPUT/OUTPUT SUPPORT
input data sets
output data sets
End-of-volume (EOV) on magnetic
tape
in INPUT/OUTPUT SUPPORT
input data sets
output data sets
End-of-volume (EOV)
processing
in INPUT/OUTPUT SUPPORT
concatenation
direct access devices
force end-of-volume
initial processing
magnetic tape
tape volume positioning
End-of-volume summary
in 7074 EMULATE FOR M/165
End operator
in FORTRAN IV SYNTAX CHECKER PLM
END option
in FORTRAN IV-TO-PL/1 LCP
End-order-sequence
in GRAPHIC SUBRTN. PACKAGE
attention
order
End-order-sequence (EOS) attention
in GRAPHICS ACCESS METHOD
End processing (IEWLMEND)
in LINKAGE EDITOR (F)
description of

End - ENDFILB

30 GY28-6609

chart
synopsis
END record
in ALGOL (F) COMPILER
26
in LINKAGE EDITOR (F)
31
format
in entry processing
in object module
introduction to
END routine
in PL/I SUBROUTINE LIBRARY
29
END STA GEN routine
in FORTRAN IV (G) COMPILER
25
END statement
in FORTRAN IV (E)
25
compile-time processing of
in FORTRAN IV (H) COMPILER
25
phase 25 processing of
in FORTRAN IV-TO-PL/1 LCP
29
END statement. checked by syntax checker
in FORTRAN IV SYNTAX CHECKER PLM
25
End statement overrider
in TESTRAN
37
END statements
in PL/I (F) COMPILER
29
count
inserted
END subcommand
in TSO COMMAND PROCESSOR VOL3-EDIT 36
summary of operations
syntax
END subcommand processing
in TSO COMMAND PROCESSOR VOL1-ACCT 36
basic operation
return codes from
subcommand identification
in TSO COMMAND PROCESSOR VOL7-TEST 36
flowcharts of
in Test overall flow
in Mainline
module description of
text description of
END subcommand processor
in CRJE PLM
36
entry point code
flowchart
messages requested
microfiche directory
module description
register usage

30 GY28-6609

ENDB
in ASSEMBLER (F)

29 GY28-6800
36 GY28-6774

31 GY28-6667

29 GY33-8009
25 GY28-6601
35 GY27-7187
36 GY27-7236

36 GY28-6659

36 GY28-6659
37 GY28-6651
30 GY28-6618

30 GY30-2027
30 GY28-6607

30 GY28-6609

ENDBLD label
---rn-TSO COMMAND PROCESSOR VOL6-RUN
in flowchart
in method of operation diagram
GY27-7228
25 GY28-6831

GY33-8000
GY28-6667

GY28-6801
GY28-6638
GY28-6601
GY28-6642
GY33-7000
GY28-6831
GY28-6611
GY28-6800

GY28-6773

GY28-6771

GY28-6777

GY30-2011

21 GY26-3700
36 GY28-6776

ENDCHAIN. field in MSGCHAIN
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

ENDCMDFG. field in WORRAREA
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

ENDCOMND. field in CALLPARM
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

29 GY33-7000
25 GY27-7152

30 GY27-7113
31 GY28-6667

ENDFILE entry point
in FORTRAN IV (H) COMPILER
ENDFILE statement
in FORTRAN IV (E)
compile-time processing of
object-time implementation of

25 GY28-6642
25 GY28-6601

m

ENDF:ILE -

146

Enter

ENDFILE statement
L--------------------------------------(continued)
in FORTRAN IV (~) COMPILER
25 GY28-6642
in FORTRAN IV-TO-PLll LCP
29 GY33-7000
ENDHALT Command Processor (IIOC1NDH)
in 7074 EMULATE FOR M/165
function
MOD

GY27-7228

ENDIN

--rn COBOL

(E)

ENDOFF
---rn-ASSEMBLER (F)
ENOOPR
~ASSEMBLER (F)
ENDP (DATAAREA DSECT)
--rn PL/I SYNTAX CHECKER PLM
pointer save area

ENQNOW, field in DICTLR
in TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

ENQSW, field in COMMON
in TSO COMMAND PROCESSOR VOL1-ADD

36 GY28-6771

29 GY33-8009

36 GY28-6771

ENDPT, field in work area
COMMAND PROC VOL5-0PERATOR

36 GY28-6775

ENDPTX routine

~COBOL (F)

24 GY28-6382

ENDREADY macro instruction
in QUEUED TELECOMM. ACCESS METHOD

30 GY30-2002

ENDREDEF
in COBOL-TO-PL/l LCP

29 GY33-7007

ENDST

21 GY26-3700
29 GY33-7007

ENDUP macro
PLM

36 GY28-6771

21 GY26-3700

ENDPPCE, field in PARSMACS
in TSO COMMAND PROCESSOR VOL1-ADD

--rn CRJE

36 GY28-6659

21 GY26-3700

24 GY28-6382

(F)
in COBOL-TO-PL/l LCP

36 GY28-6660

ENQFLG, field in CFLAGS
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

ENDPAT routine

---rn ASSEMBLER

36 GY28-6745

24 GY24-5009

~COBOL (F)

---rn TSO

use of
termination routine
use of
track stacking routine interface
in TSO CATALOG MANAGEMENT
ENQ parameter list
in MVT JOB MANAGEMENT
ENQ routine
in MVT SUPERVISOR
ENQ to the UADS
in TSO COMMAND PROCESSOR VOL1-LIST

36 GY30-2011

ENQ
in MFT SUPERVISOR
36
count
entry point
flowchart
functional description
module description
module synopsis
ENQ active indicator
in TSO COMMAND PROC VOL1-DELETE
36
ENQ/DEQ purge routine
in CONTROL PROGRAM WITH MFT
36
initiator use of
in MVT SUPERVISOR
36
description of
entry point name of
synopsis of
ENQ macro
in TSO COMAND PROC VOL2-CNCLISTATUS36
ENQ macro instruction
in CATALOG MANAGEMENT
30
in DIRECT ACCESS DEVICE SPACE MGT. 30
in MVT JOB MANAGEMENT
36
ASB routine use of
I/O device allocation routine
use of
initiator use of
queue management

GY27-7236

Enqueue, on job queue
in TSO COMMAND PROC VOL5-0UTPUT
36 GY28-6775
ENQUEUE (post code)
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Enqueue in Print class Routine (IKASD~NQ)
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
chart
description
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
chart
description of
Enqueue routine
in MVT SUPERVISOR
36 GY28-6659
description of
entry point name(s) of
flowchart of
module name for
synopsis of
Enqueue routines
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
Enqueue submit data set
in TSO COMMAND PROC VOL6-SUBMIT
36 GY28-6776
Enqueue subroutine
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Enqueueing SYSOUT data sets for cancelled
jobs
36 GY28-6660
in MVT JOB MANAGEMENT
Enqueuing the VTOC-ATLAS
in UTILITIES

32 GY28-6614

ENSEQ
in GRAPHIC SUBRTN. PACKAGE

25 GY27-7152

ENSUB

GY28-6771

---rn GRAPHIC SUBRTN.

PACKAGE

25 GY27-7152

ENTAB

GY27-7128
GY28-6659

---rn LINKAGE

EDITOR (F)
in MVT SUPERVISOR

ENTDEL routine
(F)

---rnCOBOL
GY28-6772
GY28-6606
GY28-6607
GY28-6660

Enter Data Processor (IKAPENTO)
JOB PROCESSOR SUPPORT
chart
description
extract record
in s/360 JOB PROCESSING 1130/2250
chart
description of
message module
Enter Multiple Tag Mode routine
(IITINMTM)

---rn GRAPHIC

31 GY28-6667
36 GY28-6659
24 GY28-6382
36 GY27-7159

36 GY27-7166

147
Enter Multiple Tag Mode routine
I (IITINMTM)
l--------------------------------------(continued)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
Enter routine
in LINKAGE EDITOR (F)
31 GY28-6667
Entering commands
in CONTROL PROGRAM WITH MFT
36 GY27-7128
Entering information
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
on parameter frame
on select frame
ENTER2
---rn-COBOL (E)
24 GY24-5009
Entire structure
---rn-TSO COMMAND PROCESSOR VOL1-ADD

36 GY28-6771

ENTLNGTH. field in BLDLLIST
in TSO COMMAND PROCESSOR VOL1-ADD

36 GY28-6771

ENTNAM routine
---rn-COBOL (F)

24 GY28-6382

ENTPRT routine
---rn-COBOL (F)

24 GY28-6382

Entries in the UADS
in TSO COMMAND PROC VOL1-DELETE
36 GY28-6771
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
ENTRK
in GRAPHIC SUBRTN. PACKAGE

25 GY27-7152

Entry
in TSO COMMAND PROC VOL4-LISTBC
36
from LOGON
from TMP
in TSO COMMAND PROCESSOR VOL1-ADD 36
length
point
ENTRY
in ASSEMBLER (F)
21
Entry, directory
in TESTRAN
37
Entry, post-processing
in JOB MANAGEMENT
36
Entry. TIA table
in TESTRAN
37
Entry, trace table
in TESTRAN
37
ENTRY (keyword attribute)
in PL/I SYNTAX CHECKER PLM
29
attribute classification
attributes not allowed in
checking of
difficult algorithm for
GENERIC attribute in list
GENFLAG (GENERIC found flag)
in GENERIC attribute list
level number for
nesting of
subroutine ENTRY (IKM23)
ENTRY (keyword statement)
in PL/I SYNTAX CHECKER PLM
29
attribute classification for
attributes in
arithmetic attributes
bit string attributes
other
checking of
entry-name in
label prefix before
options:
PRECFLAG (Precision attribute flag)
subroutine PROCENTR (IKM22)

GY28-6774
GY28-6771

GY26-3700
GY28-6611
GY28-6613
GY28-6611
GY28-6611
GY33-8009

GY33-8009

Enter - Entry
ENTRY
in
Entry
in
Entry

attribute
ALGOL-TQ-PL/l LCP
29 GY33-7006
block
FORTRAN IV (H) COMPILER
25 GY28-6642
code
~n TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
for DAIR
ENTRY CODE GEN routine
in FORTRAN IV (G) COMPILER
25 GY28-6638
Entry code to DAIR
in TSO COMMAND PROC VOL4-LISTBC
36 GY28-6774
Entry codes
in TSO TMP & SERVICE ROUTINES
36 GY28-6770
to Catalog Information routine
to Command Scan service routine
to Default service routine
to Dynamic Allocation Interface Routine
to Dynamic Allocation routines
to GETLINE service routine
to PUTGET service routine
to PUTLINE service routine
to STACK service routine
Entry codes. DAIR
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY28-6772
Entry codes to DAIR
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
Entry coding
in FORTRAN IV (H) COMPILER
25 GY28-6642
main program
subprogram main
subprogram secondary
ENTRY-IEKTEN
in FORTRAN IV (H) COMPILER
25 GY28-6642
Entry interface subroutine
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
Entry labels, in source text
in PL/I (F) COMPILER
29 GY28-6800
Entry list
in LINKAGE EDITOR (F)
31 GY28-6667
contents
format
use of
Entry list, device
in TCAM SERVICEABILITY AIDS
30 GY30-2027
Entry-name
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
in TSO COMMAND PROC VOL1-DELETE
36 GY28-6771
Entry name, in routine directory
in TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6775
ENTRY NAME ALLOCATION routine
in FORTRAN IV (G) COMPILER
25 GY28-6638
Entry names
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
cross reference list of
resolving
Entry names for routines,
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
IKJEFEOl
IKJEFE02
IKJEFE03
IKJEFE04
IKJEFE05
IKJEFE06
ENTRY NAMES roll
in FORTRAN IV (G) COMPILER
25 GY28-6638
Entry-parameter procedures
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Entry-parameter procedures
(multitasking)
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Entry placement subroutine
in FORTRAN IV (H) COMPILER
25 GY28-6642
Entry point
in LINKAGE ESITOR (F)
31 GY28-6667
assigned by linkage editor
in END processing

~

Entry -

148

Envirorunent

Entry point

l __~~_::~~:~-~~~:~~-~::--------------~tc~~~~~~!~J

processing
in TESTRAN
37 GY28-6611
in TSO COMMAND PROC VOL4-LISTBC
36 GY28-6774
LOGON only
normal
special
TMP
in TSO COMMAND PROC VOL6-RENAME
36 GY28-6776
directory of
IKJEHCLR
IKJDFLT
IKJEHMSG
IKJEHREN
IKJEHRN2
IKJEHSMG
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
Entry point, formal parameter
in PL/I (F) COMPILER
29 GY28-6800
Entry point determination
in LOADER
31 GY28-6714
checking of
default for preloaded text
in ESD processing
Entry point IKJEFROO
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
Entry point name
in TSO COMMAND PROC VOL6-PROFILE
36 GY28-6776
IKJEFT82 as
of routines used by PROFILE
Entry-point names
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY28-6772
Entry pOint parameter list
in FORTRAN IV-TO-PL/l LCP
29 GY33-7000
Entry points
in MVT SUPERVISOR
36 GY28-6659
directory of
embedded, informing the supervisor of
in TSO COMMAND PROC VOL1-DELETE
36 GY28-6771
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
of IKJEHCIR
of IKJEHDEF
of IKJEHDEL
in TSO COMMAND PROC VOL4-LISTALC
36 GY28-6774
in TSO COMMAND PROC VOL5-LISTCAT
36 GY28-6775
directory of
individual entry points in module,
descriptions of
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
IKJEHMEM
IKJEHDSl
IKJEHWRT
in routine directory
in TSO COMMAND PROC VOL6-PROTECT
36 GY28-6776
IKJEHMSG
IKJEHPCD
IKJEHPWP
IKJEHPRO
IKJEHS~

in TSO COMMAND PROCESSOR VOL1-CHNG
in TSO COMMAND PROCESSOR VOL1-LIST
IKJEFA40
IKJEFA42
IKJEFA43
in TSO COMMAND PROCESSOR VOL4-FREE
to IKJDAIR
to IKJEFF18
to IKJPARS
in TSO COMMAND PROCESSOR VOL4-HELP
Entry points, dictionary entries
in PL/I (F) COMPILER
Entry points, in directory
in TSO COMMAND PROC VOL6-WHEN/END

36 GY28-6771
36 GY28-6771

36 GY28-6774

Entry
in
Entry
in

positional operand
TESTRAN
37
processor (IE.WLMENT)
LINKAGE EDITOR (F)
31
description of
charts
in program organization
Entry record
in COBOL-TO-PL/l LCP
29
ENTRY roll
in FORTRAN IV (G) COMPILER
25
Entry Save field
in COBOL (F)
24
Entry statement
in TESTRAN
37
ENTRY statement
in FORTRAN IV (H) COMPILER
25
in FORTRAN IV-TO-PL/1 LCP
29
in LINKAGE EDITOR (F)
31
general description of processing
operation diagram
processor
ENTRY statement, processing
in COBOL-TO-PL/l LCP
29
Entry table
in MFT SUPERVISOR
36
Entry table (ENTAB)
in LINKAGE EDITOR (F)
31
entries in the CESD
format
function
introduction to
PC-delete entry for
used in relocating V-type address
constants
in MVT SUPERVISOR
36
format of
Entry table creation routine (SCDENTAB)
in LINKAGE EDITOR (F)
31
description of
in program organization
Entry table size determination routine
(IEWLMENS)
in LINKAGE EDITOR (F)
31
calls list format
processing
chart
in program organization
Entry to job management
in CONTROL PROGRAM WITH MFT
36
after IPL
after step execution
Entry to syntax checker
in PL/I SYNTAX CHECKER PLM
29
from system interface
Entry type 1
in PL/I (F) COMPILER
29
ENTRYB
~ASSEMBLER (F)
21
ENTRYFL (ENTRY attribute flag)
in PL/I SYNTAX CHECKER PLM
29
checking ENTRY attribute list
checking GENERIC attribute list
ENTRY2
~MVT SUPERVISOR
36

GY28-6611
GY28-6667

GY33-7007
GY28-6638
GY28- 6382
GY28- 6611
GY28-6642
GY33-7000
GY28-6667

GY33-7007
GY27-7236
GY28-6667

GY28-6659
GY28-6667

GY28-6667

GY27-7128

GY33-8009
GY28-6800
GY26-3700
GY33-8009

GY28-6659

ENTTDI
in FORTRAN IV-TO-PL/l LCP

29 GY33-7000

ENV
- i n PL/I SYNTAX CHECKER PLM

29 GY33-8009

36 GY28-6774
29 GY28-6800
36 GY28-6776

Environment
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
analysis
controlled

149
Environment
I in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
L--------------------------------------(continued)
machine-check handler
record
recording
system (saving of)
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
TIME Processor
Environment, operating
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771
ENVIRONMENT (keyword attribute)
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
checking of
constants range
ENVMASK (options found)
ENVXMASK (current option)
option list
subroutine ENV (IKM23)
ENVIRONMENT attribute
in ALGOL-TO-PL/l LCP
29 GY33-7006
Environment checkpoint record
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Environment checkpoint routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
Environment checkpoint routines
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Environment control table
in TSO COMMAND PROC VOL1-DELETE
36 GY28-6771
data area
pointers to
in TSO COMMAND PROC VOL6-WREN/END 36 GY28-6776
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
in TSO CONTROL PROGRAM
36 GY28-7199
Environment control table,
pointer to
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-6771
Environment control table, points to
in TSO COMMAND PROCESSOR VOLl-ADD 36 GY28-6771
Environment control table (ECT)
in TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6775
data area
in directory
in TSO COMMAND PROC VOL6-PROTECT
36 GY28-6776
pointer to in DAPB18
pointer to in DAPL
pointer to in OFPL
pointer to in IOPL
pointer to in PPL
in TSO COMMAND PROC VOL6-TERMINAL 36 GY28-6776
ECTNOPD bit in
pointer to in CPPL
pointer to in PPL
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771
in ACCTPLST
in CTAB
in PLPLIST
in PPL
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
definition
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
pointer to in CPPL
pointer to in DAPL
pointer to in IOPL
pointer to in PPL
pointer to in WORKAREA
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
format of

Environment - EOD
Environment control table (ECT) pointed to
in DFPL
in TSO COMMAND PROC VOL6-RENAME
36 GY28-6776
Environment Division
in COBOL (F)
24 GY28-6382
Environment for CHANGE subcommand
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
Environment of CALL CP
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
Environment of DELETE
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
Environment of EXEC
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
ENVIRONMENT option, for file constants
in PL/I (F) COMPILER
29 GY28-6800
Environment required
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
ENVIRONMENT string, with COBOL option
in PL/I (F) COMPILER
29 GY28-6800
Environmental control table, address of
in TSO COMMAND PROC VOL1-BROADCAST 36 GY28-6771
in ACCTCPPL
in DAPL
in IOPL
Environmental control table (ECT)
in TSO COMMAND PROC VOL4-LISTBC
36 GY28-6774
passed in CPPL
passed in DAPL
passed in IOPL
passed in PPL
in TSO COMMAND PROC VOL6-PROFILE
36 GY28-6776
changed by IKJEFT82
description of fields
ECTNOPD bit
pointer to
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
command name indicator
pointer in CPPL
pointer in DAPL
Environmental data
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
Environmental options, use of
in PL/I (F) COMPILER
29 GY28-6800
ENVMASK
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

--rnCOBOL

ENVSCN routine
(F)

24 GY28-6382

ENVTBL table
in COBOL (F)

24 GY28-6382

ENVXMASK
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

EOB
in INDEXED SEQUEN. ACCESS METHOD
EOB (end of block)
in PL/I (F) COMPILER
EOB/ETB handling subtask
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
EOB module-IGG019V2
in IBM 1419/1275 DEVICE DEP. BSAM
EOB operator
in PL/I (F) COMPILER

30 GY28-6618
29 GY28-6800
30 GY30-2029

30 GY21-0012
29 GY28-6800

in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774

BOD -

150

EQUPLAG

EOD (End of Data)
in TSO COMMAND PROC VOL5-0UTPUT
EODAD routine
in SEQUENTIAL ACCESS METHODS
control passes to

36 GY28-6775
30 GY28-6604

EODRT, subroutine in IKJEFH03
TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
address in DCB
description, processing

---rn

EO1=: driver
in FORTRAN IV (G) COMPILER
in INDEXED SEQUEN. ACCESS METHOD
EOFBIT switch
in ONLINE TEST EXECUTIVE PROGRAM
EOJ reply
in EMULATOR FOR 7090/7094/709411

25 GY28-6638
30 GY28-6618
37 GY28-6651
35 GY27-7187

in FORTRAN IV (H) COMPILER
Epilog table
in FORTRAN IV (E)
format of
generation of
use of
Epilogue
in FORTRAN IV (H) COMPILER
hpilogue code, examples
in PL/I (F) COMPILER
EPILOGUE GEN routine
in FORTRAN IV (G) COMPILER
Epilogues
in FORTRAN IV (G) COMPILER
in PL/I SUBROUTINE LIBRARY

25 GY28-6642
25 GY28-6601

25 GY28-6642
29 GY28-6800
25 GY28-6638
25 GY28-6638
29 GY28-6801

EPRLZ
in ASSEMBLER (F)

21 GY26-3700

---rn

EPTGN routine
COBOL (F)

24 GY28-6382

EPXCTL, field in COMMON
---rn-TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

EPXCTL2, field in COMMON
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

EOM
in LINKAGE EDITOR
in LOADER
EOM indicator
in MVT SUPERVISOR

(F)

31 GY28-6667
31 GY28-6714
36 GY28-6659

in ASSEMBLER (F)
EOS indicator
---in MVT SUPERVISOR
EOSTGP routine
---rnCOBOL (F)

36 GY28-6659
24 GY28-6382

EOV, updating XCTL tables of
in UTILITIES
32 GY28-6614
EOV (end-of-volume) executor
in SEQUENTIAL ACCESS METHODS
30 GY28-6604
EOV (end-of-volume) exit
in SEQUENTIAL ACCESS METHODS
30 GY28-6604
EOV (end-of-volume) routine of I/O support
30 GY28-6604
in SEQUENTIAL ACCESS METHODS
control passed to
Check routine
Create-BDAM Write routine
EOV/new volume executor
FEOV executor
synchronizing routines
control received from
Check routines
Create-BDAM Check routine
FEOV executor
SYNAD/EOV executor
synchronizing routines
EOV/new volume executor
30 GY28-6604
in SEQUENTIAL ACCESS METHODS
EOV reply
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
EOV routine flowcharts
in INPUT/OUTPUT SUPPORT
30 GY28-6609
direct access
initialization
magnetic tape

EQPRO
in FORTRAN IV-TO-PL/1 LCP

21 GY26-3700
29 GY33-7000

EQU
in ASSEMBLER (F)
EQU symbol
in FOR'IRAN IV SYNTAX CHECKER PLM

21 GY26-3700
25 GY28-6831

Equal sign (=)
in PL/I SYNTAX CHECKER PLM
29
EQUFLAG for assignment statement
in assignment statement
in TSO COMMAND PROCESSOR VOL7-TEST 36
Equal to
in PL/I SYNTAX CHECKER PLM
29
= (both 60- and 48-character sets)
EqualS module
in SORT/MERGE
33

GY33-8009
GY28-6777
GY33-8009
GY28-6597

Equate Strings
in COBOL (F)
24 GY28-6382
GN
PN
EQUATE subcommand processor, IKJEGEQU
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
diagram of
flowchart of
module description of
text description of
Equates for IEBDG
in UTILITIES
32 GY28-6614
EQUB
-in ASSEMBLER (F)

21 GY26-3700

EOxxx fields in E01DATDF
PROCESSOR VOL4-EXEC 36 GY28-6774

EQUBLK
in FORTRAN IV-To-PL/1 LCP

29 GY33-7000

EP= (keyword)
in LOADER

31 GY28-6714

EQUBLKj
in FORTRAN IV-TO-PL/1 LCP

29 GY33-7000

EPFPRET
in INITIAL PROGRAM LOADER AND NIP

36 GY28-6661

---rn TSO COMMAND

EPILOG-IEKTEP

EQUFLAG (equate flag)
in PL/I SYNTAX CHECKER PLM
for ASNLEFT subroutine (IKM03)
in COMFLAG2

29 GY33-8009

151

EQUFLAG - ERP
Era~e

EQUFLAG (equate flag)

Phase routine
1n MVT SUPERVISOR
entry point name of
function of
module name for
synopsis of

l__ ~~_:~~:-~:~~-:~~:~~-:~---------~~c~~~i~~~gi
set during translation (IKM02)

EQUIV
in
EQUIV
in
EQUIV
in

ALGOL-To-PL/1 LCP
29 GY33-7006
ALLOCATION PRINT ERRORS routine
FORTRAN IV (G) COMPILER
25 GY28-6638
MAP routine
FORTRAN IV (G) COMPILER
25 GY28-6638

Erasing tracks-IEBCOPY
in UTILITIES

36 GY28-6659

32 GY28-6614

ERB

---in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Equivalence 24,26
25
in FORTRAN IV (H) COMPILER
group
head
variable
EQUIVALENCE (EQUIV) ALLOCATION roll
25
in FORTRAN IV (G) COMPILER
EQUIVALENCE (EQUIV) HOLD roll
25
in FORTRAN IV (G) COMPILER
EQUIVALENCE (EQUIV) roll
in FORTRAN IV (G) COMPILER
25
EQUIVALENCE (EQUIV) TEMP roll
25
in FORTRAN IV (G) COMPILER
EQUIVALENCE block
29
in FORTRAN IV-TO-PL/1 LCP
EQUIVALENCE class
25
in FORTRAN IV (E)
EQUIVALENCE group
25
in FORTRAN IV (E)
EQUIVALENCE intermediate text
25
in FORTRAN IV (E)
creation of
deletion of
format of
EQUIVALENCE OFFSET roll
in FORTRAN IV (G) COMPILER
25
EQUIVALENCE root
in FORTRAN IV (E)
25
EQUIVALENCE statement
in FORTRAN IV (E)
25
compile-time processing of
generation of intermediate text for
nonsyntactical errors encountered
in
in FORTRAN IV (H) COMPILER
25
in FORTRAN IV-TO-PL/1 LCP
29
EQUIVALENCE statements
in FORTRAN IV (G) COMPILER
25
EQUIVALENCE table
in FORTRAN IV (E)
25
BQUIVALENCE tables
in FORTRAN IV-TO-PL/1 LCP
29
EQUIVALENCE variables
in FORTRAN IV (G) COMPILER
25
allocation of storage for
description
listing of
map of
position in object module
Equivalent GDS
in GRAPHIC SUBRTN. PACKAGE
chaining
creating
execution of
EQVAR-IEKGEV
in FORTRAN IV (H) COMPILER

GY28-6642

GY28-6638
GY28-6638
GY28-6638
GY28-6638
GY33-7000
GY28-6601

35 GY27-7187

ERCOM-IEKAER
---rn
FORTRAN

25 GY28-6642

IV (H) COMPILER

EREP (Environment Record Editing and
Print) program
in MACHINE-CHECK HANDLER, S360 M85 31 GY27-7184
EREP (Environment Record Editing and
Printing program)
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
record
printout
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
EREP (Environmental Record Edit and
Print) program, sample

GY28-6601
GY28-6601

GY28-6638

ERET
---rn ALGOL (F) COMPILER

26 GY33-8000

EREXITPR routine
in FORTRAN IV (G) COMPILER

25 GY28-6638

ERFETCH
in MVT SUPERVISOR

36 GY28-6659

ERFSW switch
---rn
COBOL (F)

24 GY28-6382

ERFUL field
--rn
COBOL

24 GY28-6382

GY28-6601
GY28-6601

(F)

GY28-6642
GY33-7000

ERINIT
--rn-COBOL-TO-PL/1 LCP

GY28-6638

--rn

29 GY33-7007

ERLIN

COBOL-TO-PL/l LCP

29 GY33-7007

ERLIN1
--rn-COBOL-To-PL/1 LCP

29 GY33-7007

ERLIN2
--rn-COBOL-TO-PL/1 LCP

29 GY33-7007

ERLIN3
---rn-COBOL-TO-PL/1 LCP

29 GY33-7007

ERLOD8
---rn-ASSEMBLER (F)

21 GY26-3700

GY28-6601
GY33-7000
GY28-6638

25 GY27-7152
ERMS

---rn FORTRAN IV-TO-PL/1 LCP

29 GY33-7000

25 GY28-6642

EROPT command handling routine (IITERP)
in EMULATOR FOR 7090/7094/7094II
35 GY27-7187

36 GY30-2011
31 GY28-6667
31 GY28-6714

ERP
---in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
ERP (Error ~covery Procedures) loading of
modules
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661

ER
in CRJE PLM
in LINKAGE EDITOR (F)
in LOADER

ERCHECK subroutine
in EMULATOR FOR 7090/7094/7094II

152

ERP - Error
ERP modifications
in EMULATOR FOR 7090/7094/7094II
35 GY27-7187
ERP module
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
ERPIB (error recovery procedure interface
block)
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
construction by CCH (diagram)
in data area directory
data area layout
ERPIBSET
in INPUT/OUTPUT SUPERVISOR

30 GY28-6616

ERRCODE
in GRAPHICS PROBLEM ORIENTED RTNS. 30 GY27-7110
ERRCODE buffer
in TSO COMMAND PROC VOL6-PROFILE
36 GY28-6776
ERREC
in COBOL-To-PL/l LCP
ERRFLAG (error message in buffer)
in PL/I SYNTAX CHECKER PLM
in COMFLAGl
ERRLOD routine
---rn-COBOL (F)
ERRMESS
in PL/I SYNTAX CHECKER PLM
pointer to error message buffer

29 GY33-7007
29 GY33-8009

24 GY28-6382
29 GY33-8009

ERRMSG
~PL/I SYNTAX CHECKER PLM
29 GY33-8009
difficult algorithm in
subroutine in IKM03, IKM22, IKM23
Erroneous references, replaced in text
in PL/I (F) COMPILER
29 GY28-6800
Error
---rn

FORTRAN IV (H) COMPILER
code table
levels
phase 10 response to
phase 15 response to
table
in LINKAGE EDITOR (F)
messages
processing
in LOADER
diagnostic dictionary printing
routine (IEWBTMAP)
flowchart of
synopsis of
internal code definitions
log routine (IEWERROR)
flowchart of
synopsis of
message-issuer cross reference
table
processing
in TSO COMMAND PROC VOL1-DELETE
indicator
termination
in TSO COMMAND PROC VOL4-LISTBC
in allocation
in service routine processing

25 GY28-6642

31 GY28-6667
31 GY28-6714

36 GY28-6771
36 GY28-6774

termination procedure
in TSO COMMAND PROC VOL6-PROTECT
36 GY28-6776
codes
messages
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
message processing
termination procedure
Error analysis-IEBCOPY
in UTILITIES
32 GY28-6614
Error analysis module
in TSO COMMAND PROC VOL1-BROADCAST 36 GY28-6771
dynamic allocation of
Error analysis module, channel
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
Error chains
in PL/I (F) COMPILER
29 GY28-6800
ERROR CHAR roll
in FORTRAN IV (G) COMPILER
25 GY28-6638
Error Check Circuitry Verification
module (IGFASR1D)
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
Error checking
in COBOL (F)
24 GY28-6382
Error code message-originator cross
reference table
in FORTRAN IV SYNTAX CHECKER PLM
25 GY28-6831
Error code processor, function of
in FORTRAN IV SYNTAX CHECKER PLM
25 GY28-6831
Error code routines, assembler language
equivalent for
in FORTRAN IV SYNTAX CHECKER PLM
25 GY28-6831
Error codes
in GRAPHICS ACCESS METHOD
30 GY27-7113
in INDEXED SEQUEN. ACCESS METHOD
30 GY28-6618
BISAM
QISAM
in PL/I SUBROUTINE LIBRARY
29 GY28- 6801
in TSO COMMAND PROC VOL6-PROFII£
36 GY28-6776
Error codes, OPEN/CLOSE
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Error Component
in BASIC DIRECT ACCESS METHOD
30 GY28- 6617
ERROR condition
in PL/I (F) COMPILER
29 GY28- 6800
Error conditions
in GRAPHICS ACCESS METHOD
30 GY27-7113
in GRAPHICS PROBLEM ORIENTED RTNS. 30 GY27-7110
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
BLDL
console
IPL
WAIT state codes
Error Correction Function (ECF)
in INPUT/OUTPUT ,SUPERVISOR
30 GY28- 6616
Error counters
in BASIC TELECOMM. ACCESS METHOD
30 GY30-2001
Error data
in INPUT/OUTPUT SUPERVISOR
30 GY28- 6616
counting procedure
diagrams of operation
environmental data
error statistics
inboard rec ord
defined in glossary
used with CCH
outboard record
outboard recorder routine
statistics record on SYS1.LOGREC
(diagram)
statistics recorder routine
statistic table
defined in glossary
described in module directory
update of (diagram)
system environment recording message
routine

153
Error data
I in INPUT/OUTPUT SUPERVISOR
30 GY2B-6616
L--------------------------------------(continued)
SYS1.LOGREC data set
data area layout
messages to operator (diagram)
retrieval of recorded data
SYS1.LOGREC statistics update routine
VOLSTAT routine
volume statistics table
Error description-IEBTCRIN
in UTILITIES
32 GY2B-6614
Error descriptions
in INDEXED SEQUh~. ACCESS METHOD
30 GY2B-661B
duplicate record
record length--BISAM
sequence error
write K with read KU
l!:rror detection
in ALGOL (F) COMPILER
26 GY33-BOOO
Error dictionary entries
in PL/I (F) COMPILER
29 GY2B-6BOO
Error Editor
in PL/I (F) COMPILER
29 GY2B-6BOO
Error editor logical phase
in PL/I (F) COMPILER
29 GY28-6BOO
Error EXCP routine
in INPUT/OUTPUT SUPERVISOR
30 GY2B-6616
diagram of operation
1052 error routine
1403 and 1443 recovery routine
2671 error routine
Error EXCP supervisor (diagram)
in INPUT/OUTPUT SUPERVISOR
30 GY2B-6616
Error Exit routine (IITOSDBM)
in EMULATOR FOR 7090/7094/709411
35 GY27-71B7
description
flowchart
Error exit routine for MCH
in MACHINE-CHECK HANDLER, S360 M85 31 GY27-7184
Error exits
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY2B-6771
Error fetch sequence
in MVT SUPERVISOR
36 GY2B-6659
Error handling
in PL/I SUBROUTINE LIBRARY
29 GY28-6BOl
Error handling
in PL/I SUBROUTINE LIBRARY
29 GY2B-6801
flowchart
teleprocessing
module IHEERR
data-directed
edit-directed
list-directed
Error handling function
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
function
subroutine IKM12
Error handling routines
in GRAPHICS ACCESS METHOD
30 GY27-7113
in INTRO. TO CONTROL PROGRAM LOGIC 36 GY28-6605
Use of
Error identification number
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
Error immediate text entry
in FORTRAN IV (E)
25 GY28-6601
generation of
ERROR LBL roll
in FORTRAN IV (G) COMPILER
25 GY2B-6638
ERROR Listing (Phases PD1, PD2)
in COBOL (E)
24 GY24-5009
Error logging
in LINKAGE EDITOR (F)
31 GY2B-6667
description of
map
routine (IEWLMLOG)

Error - Error
chart
in program organization
table and list used
Error loop
in TCAM SERVICEABILITY AIDS
Error loop option
in ONLINE TEST EXECUTIVE PROGRAM
Error message
in ALGOL-TO-PL/l LCP
in PL/I SYNTAX CHECKER PLM
buffer (MESSBUFF)
construction
format in buffer
insertions:
text
error identification number
insertions
line numbers
word dictionary (WORDGRn)
transmission to terminal
Error message--module cross-reference
table
in LINKAGE EDITOR (F)
Error message, to issue
in TSO COMMAND PROCESSOR VOLI-CHNG
Error message, write-to-operator
in INPUT/OUTPUT SUPERVISOR
Error message buffer
in PL/I SYNTAX CHECKER PLM
MESSBUFF
pointer to (ERRMESS)
Error message flag
in PL/I SYNTAX CHECKER PLM
Error message module
in TSO COMMAND PROC VOLI-BROADCAST
broadcast data set
Error message printing
in PL/I SUBROUTINE LIBRARY
Error message processing routine
in JOB MANAGEMENT
ERROR MESSAGE roll
in FORTRAN IV (G) COMPILER
Error message routine
in QUEUED TELECOMM. ACCESS METHOD
chart
Error message table
in COBOL-TO-PL/l LCP
Error message text
in PL/I (F) COMPILER
Error messages
in COBOL (F)
in EMULATOR FOR 7090/7094/709411
emulator program
tape formatting program
in FORTRAN IV (E)
compile-time generation of
object-time generation of
in FORTRAN IV (G) COMPILER
in FORTRAN IV SYNTAX CHECKER PLM
and Fortran language levels
and metalanguage
example of use
explicit
implicit
list of
in ONLINE TEST EXECUTIVE PROGRAM
in PLiI (F) COMPILER
classification
order of severity
phase directory
text
in PL/I SYNTAX CHECKER PLM
for constants
issued by syntax checker
in S/360 JOB PROCESSING 1130/2250
in SORT/MERGE

30 GY30-2027
37 GY2B-6651
29 GY33-7006
29 GY33- B009

31 GY2B-6667
36 GY28-6771
30 GY28-6616
29 GY33-B009

29 GY33-8009
36 GY28-6771
29 GY28-6801
36 GY28-6613
25 GY28-6638
30 GY30-2002
29 GY33-7007
29 GY28-6800
24 GY28-6382
35 GY27-7187
25 GY28-6601
25 GY28-6638
25 GY2B-6831

37 GY28-6651
29 GY2B-6BOO

29 GY33-B009
36 GY27-7166
33 GY28-6597

Error - Error

Error messages
L--------------------------------------(continued)
in TSO COMMAND PROC VOL1-BROADCAST 36 GY28-6771
from data set allocation error
analysis
list of
for unavailable space in MAIL
directory
for unsuccessfule I/O GETMAIN
for unusable data set
in TSO COMMAND PROC VOL1-SUBRTNS
36 GY28-6771
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY28-6772
in TSO COMMAND PROC VOL4-LISTALC
36 GY28-6774
in TSO COMMAND PROC VOL5-LISTCAT
36 GY28-6775
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
in TSO COMMAND PROC VOL6-RENAME
36 GY28-6776
in TSO COMMAND PROCESSOR VOL1-ACCT 36 GY28-6771
in TSO COMMAND PROCESSOR VOLI-LIST 36 GY28-6771
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
Error messages, modules
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Error-on-error conditions
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
ERROR option
in FORTRAN IV-TO-PL/1 LCP
29 GY33-7000
Error option implementation
in SEQUENTIAL ACCESS METHODS
30 GY28-6604
Check routines
description of
input, output, inout, outin
paper tape
update
SYNAD/EOV routine
synchronizing and error processing
routines
description of
input
output
track overflow
update
Error Options Command routine (IITERP)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
Error Pool
in ALGOL (F) COMPILER
26 GY33-8000
Error post and second level CCW
return module
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
Error post routine
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
charts
Error print option
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
Error procedure
in CRJE PLM
36 GY30-2011
Error procedures
in TSO COMMAND PROCESSOR VOLI-ACCT 36 GY28-6771
in UTILITIES
32 GY28-6614
data cell
disk and drum
Error processing
in S/360-1130 DATA TMN. - FORTRAN 25 GY27-7161
general information about
in System/360
in 1130 system
Erroc processing, DAIR
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
Error queue--BISAM

154
in INDEXED SEQUEN. ACCESS ~lliTHOD
30 GY28-6618
format
flowchart references
use in processing
Error record
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
CCH
MCH
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
in MACHINE-CHECK HANDLER, S360 M85 31.GY27-7184
Error record definition-IEHATLAS
in UTILITIES
32 GY28-6614
Error Recorder, IGFMCHE2
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
flowchart
module description
Error Recorder module
in MACHINE-CHECK HANDLER, S360 M85 31 GY27-7184
description of
function of
Error Recorder module (IGFASR01)
in MACHINE-CHECK HANDLER, s360 M65 31 GY27-7155
Error Recorder module (IGFMCHE2)
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
Error recording
in FORTRAN IV (G) COMPILER
25 GY28-6638
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
Error recovery
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
asynchronous exit queue (diagram)
channel error block table
in data area directory
data area layout
channel status word indicators
defined
diagrams of operation
error routine interface
ERPIB
EXCP macro instruction
input-output error, defined in glossary
messages to operator (diagram)
recoverable error
recovery management support
communications area
in data area directory
data area layout
SER/CCH interface
statistics update routine
SYS1.LOGREC statistics update routine,
described in module directory
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
levels of
types
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY28-6772
in 7074 EMULATE FOR M/165
GY27-7228
emulator
input
noise records
output
postprocessor
preprocessor
Error recovery, types
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
Error recovery for data cell-IEHDASDR
in UTILITIES
32 GY28-6614
Error recovery levels
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
Error recovery procedure
in BASIC DIRECT ACCESS METHOD
30 GY28-6617
Error recovery procedure, I/O
in FORTRAN IV (E)
25 GY28-6601
compile-time
object-time
Error recovery procedure (ERP)
routines
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029

155
Error recovery procedure-IGEOOllE
in IBM 1419/1275 DEVICE DEP. BSAM 30 GY21-0012
Error recovery procedure interface block
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
Error recovery procedure module names
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
1052 error routine
1285 error routine
1287 error routine
1288 error routine
1403 and 1443 error routine
1419/1275 error routine
2250 error routine
2301, 2302, 2303, 2305, 2311, 2314,
2321, and 3330 error routines
2260 and 1053 error routine
2321 error routine
2400 error routine
2495 error routine
2501, 2520, and 1442 error routine
2540 error routine
2671 error routine
5450 error routine
Error recovery procedures
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
Error recovery procedures (ERP)
in BASIC TELECOMM. ACCESS METHOD
30 GY30-2001
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
definition
introduction
linkage between the BSC modules
linkage between the start/stop
modules
method of operation
Error recovery routines
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771
STAE exit routine
STAI exit routine
Error retry
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
after condition codes are checked
channel start routine
EXCP routine
function of CCH
I/O error routines
I/O purge routine
use of RQE
1052 error routine
1403 and 1443 error routine
1442, 2501, and 2520 error routine
2250 error routine
2260 and 1053 error routine
2301, 2302, 2303, 2305~ 2311, 2314,
2321, and 3330 error routines
2400 error routines
2495 error routine
2540 error routine
5450 error routine
Error retry counter (SUBRETRY)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
ERROR roll
in FORTRAN IV (G) COMPILER
25 GY28-6638
ERROR routine
in COBOL (F)
24 GY28-6382
Error routines
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
description of
1052 error routine described
in module directory
1285, 1287, and 1288 error routines
described
in module directory
1403 and 1443 error routines described
in module directory

Error - Errors
1419/1275 error routines described
in module directory
1442, 2501, and 2520 error routines
described
2250 error routine described
in module directory
2260 and 1053 error routines described
in module directory
2301, 2302, 2303, 2305, 2311, 2314,
2321, and 3330 error routines
in module directory
2400 error routine described
in module directory
2495 error routine described
in module directory
~
2540 error routine described
in module directory
2671 error routine described
in module directory
5450 error routine described
in module directory
in TSO CONTROL PROGRAM
36 GY28-7199
Error severity
in COBOL (F)
24 GY28-6382
Error statistics
in BASIC TELECOMM. ACCESS METHOD
30 GY30-2001
message IEC801I
message IEC802I
Error Symbol
in COBOL (F)
24 GY28-6382
Procedure IC-Text format
ERROR SYMBOL roll
in FORTRAN IV (G) COMPILER
25 GY28-6638
ERROR TEMP roll
in FORTRAN IV (G) COMPILER
25 GY28-6638
Error termination procedure
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY28-6172
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6174
clearing terminal input queue
flushing input stack
Error Text
in COBOL (F)
24 GY28-6382
ERRORM
-rIlCOBOL (E)
24 GY24-5009
ERRORMSG macro expansion linkage
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
ERRORMSG parameter list
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Errors
-rilCOBOL (F)
24 GY28-6382
definition
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
allocation validity checking
duplicate name
Extend input/output
ISAM allocation
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
ABEND
'CPU emulation
Data Management Interface handling
of
debugging I/O
I/O simulation
permanent I/O
in FORTRAN IV (G) COMPILER
25 GY28-6638
detection of
recording of
Errors, detected in read-in phase
in PL/I (F) COMPILER
29 GY28-6800
Errors, source statement
in FORTRAN IV (E)
25 GY28-6601
intermediate text for
messages for
Errors, unexpected
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237

ill!

Errors -

156

EVAL

Errors and diagnostic messages
in PL/I (F) COMPILER
29 GY28-6800
Errors during channel commands-IEHATLAS
in UTILITIES
32 GY28-6614

operation diagram
processing
ESD record types
in LINKAGE EDITOR (F)

31 GY28-6667

ERRPARM

ESDCRD routine
---rDCOBOL (F)

24 GY28-6382

ESELC
in COBOL (E)

24 GY24-5009

ESEL01
in COBOL (E)

24 GY24-5009

in TSO COMMAND PROC VOL4-LISTALC
format
ERRSEV
--rnCOBOL (F)
ERRTBL table
--rnCOBOL (F)
format
ERSTACK
in COBOL-TO-PL/1 LCP
ERSTBLK
in COBOL-To-PL/1 LCP
ERSTOR
---rn-COBOL-TO-PL/1 LCP

36 GY28-6774

24 GY28-6382
24 GY28-6382

ESEL02

-rn-COBOL
29 GY33-7007
29 GY33-7007
29 GY33-7007

(E)

24 GY24-5009

ESEL03
---rDCOBOL (E)

24 GY24-5009

ESEL04
---rn-COBOL (E)

24 GY24-5009

ESEL05
---rn-COBOL (E)

24 GY24-5009

ESEL07
---rn-COBOL (E)

24 GY24-5009

ERZON

~ ALGOL-TO- PL/1 LCP

ESADDR
---rn-PL/I SYNTAX CHECKER PLM
from GETMAIN call
in DATAAREA DSECT
pointer to extra storage
ESD
---in FORTRAN IV (E)
in LINKAGE EDITOR (F)
in LOADER
in PL/I (F) COMPILER
ESD (External Symbol Dictionary)
in PL/I SUBROUTINE LIBRARY
ESD card images
in FORTRAN IV (E)
generation of
in object module
ESD cards
in COBOL (F)
definition
in FORTRAN IV (G) COMPILER
general
produced by allocate
ESD entry point
in FORTRAN IV (H) COMPILER
ESD ID
in LINKAGE EDITOR (F)
in LOADER
definition of
in END processing
in ESD processing
in RLD processing
in text processing
ESD identifier
in LINKAGE EDITOR (F)
definition
entry in high ID table
in entry processing
in ESD processing
in RLD processing
in text processing
ESD record
in ALGOL (F) COMPILER
in FORTRAN IV (H) COMPILER
in LINKAGE EDITOR (F)
definition
format
in object module

29 GY33-7006
29 GY33-8009

25
31
31
29

GY28-6601
GY28-6667
GY28-6714
GY28-6800

ESETL macro instruction

---rn
INDEXED SEQUEN. ACCESS
ESETL routine--scan mode

METHOD

30 GY28-6618

in INDEXED SEQUEN. ACCESS METHOD
description
flowchart

30 GY28-6618

ESFLAG (extra storage flag)
in PL/I SYNTAX CHECKER PLM
in COMFIAG2

29 GY33-8009

ESLENGTH (length of extra storage)
in PL/I SYNTAX CHECKER PLM
from GETMAIN call
in DATAAREA DSECT

29 GY33-8009

24 GY28-6382

ESORT
---rn
ASSEMBLER

21 GY26-3700

25 GY28-6638

Esoteric unit name
in TSO COMMAND PROCESSOR VOL1-ADD

36 GY28-6771

Estimates. storage
in TSO COMMAND PROC VOL6-PROTECT
Estimates storage
in TSO COMMAND PROC VOL6-RENAME

36 GY28-6776

ETLKUP
---rn-COBOL (E)

24 GY24-5009

29 GY28-6801
25 GY28-6601

25 GY28-6642
31 GY28-6667
31 GY28-6714

(F)

36 GY28-6776

ETPRO

---rn FORTRAN
31 GY28-6667

26 GY33-8000
25 GY28-6642
31 GY28-6667

IV-TO-PL/1 LCP

29 GY33-7000

ETXR operand
in MVT SUPERVISOR
36 GY28-6659
effect when ATTACH routine is executed
ETXR parameter
in MFT SUPERVISOR
36 GY27-7236
ETXR routine for IKJEAT06
in TSO CONTROL PROGRAM
36 GY28-7199
ETXR routine for the RCT
36 GY28-7199
in TSO CONTROL PROGRAM
ETXR scheduling
in MVT SUPERVISOR
36 GY28-6659
EVAL string
in COBOL (F)

24 GY28-6382

157
Evaluation of arguments
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
hvaluation routine formats (Phase F3)
in ASSEMBLER (F)
21 GY26-3700
attributes
character string
concatenation
decimal, hex, binary value, character
self-defining terms
operand reference
subscripting
substring
variable symbol
(keyword attribute)
in PL/I SYNTAX CHECKER PLM
attribute classification
EVbNT (keyword option)
in PL/I SYNTAX Crl~CKER PLM
in CALL statement
in DISPLAY statement
in record I/O statements
Event control blcok (ECB, used by
STOP/MODIFY
in TSO COMMAND PROCESSOR VOLI-ADD
Event control block
in INDEXED SEQU~. ACCESS METHOD
BISAM
load mode
scan mode
in INPUT/OUTPUT SUPERVISOR
in MVT SUPERVISOR
format of
in TSO COMMAND PROC VOLI-DELETE
command name in
field in ACCTECB
pointers to
in TSO CO~~D PROCESSOR VOLI-ACCT
for BROADCAST data set interface
for HELP command processor
for subcommands
in TSO COMMAND PROCESSOR VOLI-CHNG
in TSO COMMAND PROCESSOR VOL2-CALL
in TSO CONTROL PROGRAM
hvent control block (ECB)
in BASIC TELECOMM. ACCESS METHOD
creation
description
format
function
in GRAPHICS ACCESS METHOD
in JOB MANAGEMENT
cancel
in PL/I SUBROUTINE LIBRARY
in TSO COMMAND PROC VOLI-BROADCAST
used by STOP/MODIFY
in TSO COMMAND PROC VOLI-SUBRTNS
used by STOP/MODIFY
in TSO COMMAND PROC VOL2-DELETE
used by STOP/MODIFY
in TSO COMMAND PROC VOL4-LISTALC
used by STOP/MODIFY
in TSO COMMAND PROC VOL5-LISTDS
used for STOP/MODIFy
in TSO COMMAND PROC VOL6-PROFILE
in TSO COMMAND PROC VOL6-PROTECT
pointer to in DAPL
pointer to in DFPL
pointer to in IOPL
pointer to in PPL
STOP/MODIFY
in TSO COMMAND PROC VOL6-RENAME
pointed to by DFPL
. used by STOP/MODIFY
in TSO COMMAND PROC VOL6-TERMINAL
pointer to in PPL
EV~N~

29 GY33-8009
29 GY33-8009

36 GY28-6771
30 GY28-6618

30 GY28-6616
36 GY28-6659
36 GY28-6771

36 GY28-6771

Evaluation - Exchange
STOP/MODIFY
in TSO COMMAND PROCESSOR VOLI-LIST 36
used by STOP/MODIFY
in TSO COMMAND PROCESSOR VOL4-FREE 36
used by STOP/MODIFY
in TSO COMMAND PROCESSOR VOL6-RUN 36
communications
pointer to in DAPL
pointer to in IOPL
pointer to in PPL
pointer to in WORKAREA
used by STOP/MODIFY
in TSO COMMAND PROCESSOR VOL6-SEND 36
used by STOP/MODIFY
in TSO COMMAND PROCESSOR VOL6-TIME 36
Event control block (SCB)
in MFT SUPERVISOR
36
ATTACH routine
communications task
attention
DOM
external
Recovery Management
support
WTO
format
POST routine and
WAIT routine and
Event control block pointers (fields in
test communication table)
in TSO COMMAND PROCESSOR VOL7-TEST 36
ECBLOG
ECBPP
ECBTERM
ECBTMPA
ECBTMPS
ECBTST
Event indication list

GY28-6771
GY28-6774
GY28-6776

GY28-6776
GY28-6776
GY27-7236

GY28-6777

(EIL)

36 GY28-6771
36 GY28-6772
36 GY28-7199
30 GY30-2001

in MFT SUPERVISOR
Event-name
in PL/I SYNTAX CHECKER PLM
in WAIT statement
EVENT variable, major task
in PL/I SUBROUTINE LIBRARY
Event variables
in PL/I SUBROUTINE LIBRARY
EVERY option
in COBOL (F)

30 GY27-7113
36 GY28-6613
29 GY28-6801
36 GY28-6771
36 GY28-6771

36 GY27-7236
29 GY33-8009
29 GY28-6801
29 GY28-6801
24 GY213-6382

EVNTBL table

-rn-COBOL

(F)

24 GY28-6382

EVPRO

---rn FORTRAN

IV-To-PL/l LCP

29 GY33-7000

36 GY28-6772

EXAMINE
in COBOL-TO-PL/l LCP

29 GY33-7007

36 GY28-6774

EXCEPT card
---rn-UPDATE ANALYSIS PROGRAM

36 GY28-7106

36 GY28-6775
36 GY28-6776
36 GY28-6776

36 GY28-6776
36 GY28-6776

Exception codes
in INDEXED SEQUEN. ACCESS METHOD
BISAM
QISAM
Exceptional channel end (XCE)
in GRAPHICS ACCESS METHOD
Exceptional conditions
in EMULATOR FOR 7090/7094/709411
error messages
handling of
Exchange buffering
in SEQUENTIAL ACCESS METHODS

30 GY28-6618

30 GY27-7113
35 GY27-7187

30 GY28-6604

~

158

Exchange - Execute

Exchange buffering
I in SEQUENTIAL ACCESS METHODS
30 GY28-6604
L--------------------------------------(continued)
Get routines
description of
introduction to
Put routines
description of
introduction to
stage 2 open executors
stage 3 Open executor
Excluding on-line test facility
in TCAM SERVICEABILITY AIDS
EXCLUSIVE (keyword attribute)
in PUI SYNTAX CHECKER PLM
attribute classification
in OPEN statement
Exclusive block
in PL/I SUBROUTINE LIBRARY
Exclusive call
in LINKAGE EDITOR (F)
Exclusive control
in BASIC DIRECT ACCESS METHOD
EXCLUSIVE second level marker
in PL/I (F) COMPILER
EXCP
---rn INDEXED SEQUEN. ACCESS METHOD
BISAM
load mode
scan mode
in INTRO. TO CONTROL PROGRAM LOGIC
macro instruction
routine
in SORT/MERGE
EXCP, issuing of
in ONLINE TEST EXECUTIVE PROGRAM
EXCP driver
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
functions
library
microfiche directory
module description
register usage
EXCP driver for a single CPB
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
EXCP driver input queue
in TELECOMMUNICATION ACCESS METHOD
EXCP macro instruction
in CATALOG MANAGEMENT
initialization for
use of
in INPUT/OUTPUT SUPERVISOR
used by I/O supervisor
used by user
in JOB MANAGEMENT
in MVT JOB MANAGEMENT
in TSO CATALOG MANAGEMENT
initialization for
use of
EXCP queue
in TELECOMMUNICATION ACCESS METHOD
EXCP routine for I/O supervisor
in INPUT/OUTPUT SUPERVISOR
EXCP supervisor
in INPUT/OUTPUT SUPERVISOR

30 GY30-2027
29 GY33-8009

29 GY28-6801
31 GY28-6667
30 GY28-6617
29 GY28-6800
30 GY28-6618

36 GY28-6605
33 GY28-6597
37 GY28-6651
30 GY30-2029

diagrams of operation
I/O supervisor interaction
in MVT SUPERVISOR
entry point name of
function of
mod ule name for
synopsis of
EXCP validity check routine
in INPUT/OUTPUT SUPERVISOR
EXEC
---rn ALGOL-TO-PL/1 LCP
in GRAPHIC SUBRTN. PACKAGE
in TSO COMMAND PROCESSOR VOL4-EXbC
control module
message module
parameter definition module
PARSE interface rr.odule
procedure processing module
processing overview
EXEC card
in UPDATE ANALYSIS PROGRAM
EXEC command processor
in CRJE PLM
EXEC control card
in COBOL (F)
in FORTRAN IV-To-PL/1 LCP
EXEC MVC, pointers
in TSO COMMAND PROC VOL2-DELETE
EXEC PROC statement
in JOB MANAGEMENT
EXEC sta tement
in INTRO. TO CONTROL PROGRAM LOGIC
in JOB MANAGEMENT
in MVT JOB MANAGEMENT
default options
initialization processing
processing of
symbolic parameter processing
in SORT/ME.RGE
EXEC STATEMENT
in PL/I (F) COMPILER
EXEC text buffer
in GRAPHIC JOB PROCESSOR SUPPORT

36 GY28-6659

30 GY28-6616
29 GY33-7006
25 GY27-7152
36 GY28-6774

36 GY28-7106
36 GY30-2011
24 GY28-6382
29 GY33-7000
36 GY28- 6772
36 GY28-6613
36 GY28-6605
36 GY28-6613
36 GY28-6660

33 GY28-6597
29 GY28-6800
36 GY27-7159

EXECANS swi tch
in ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

30 GY30-2029

EXECOUT switch
---rnoNLINE TESr. EXECUTIVE PROGRAM

37 GY28-6651

30 GY30-2029

Executable attribute
in LINKAGE EDITOR (F)
31 GY28-6667
Executable format scheme
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Executable statement processing routines
in FORTRAN IV-TO-PL/1 LCP
29 GY33-7000
Executable statements
in FORTRAN IV (E)
25 GY28-6601
generation of intermediate text
for

30 GY28-6606
30 GY28-6616
36 GY28-6613
36 GY28-6660
36 GY28-6745

30 GY30-2029
30 GY28-6616
30 GY28-6616

Execute (EXEC) statement
in FORTRAN IV (E)
in TESTRAN
Execute card scan routine
in JOB MANAGEMENT
Execute statement
in FORTRAN IV (H) COMPILER
Execute statement cleanup routine
in JOB MANAGEMENT
Execute statement condition codes
in JOB MANAGEMENT
Execute statement condition operators
in JOB MANAGEMENT

25 GY28-6601
37 GY28-6611
36 GY28-6613
25 GY28-6642
36 GY28- 6613
36 GY28-6613
36 GY28-6613

159
Execute statement conditional execution
routine
in JOB MANAGEMENT
36 GY28-6613
Execute statement processor routine
in JOB MANAGEMENT
36 GY28-6613
Execution, problem program/TIA
in TESTRAN
Execution of an application program
in TELECOMMUNICATION ACCESS METHOD
Execution of an MCP
in TELECOMMUNICATION ACCESS METHOD
Execution of program
in PL/I SUBROUTINE LIBRARY
Execution time
in TSO COMMAND PROCESSOR VOL6-TIME
in TSO CONTROL PROGRAM

37 GY28-6611
30 GY30-2029
30 GY30-2029
29 GY28-6801
36 GY28-6776
36 GY28-7199

Executive
in FORTRAN IV SYNTAX CHECKER PLM
25 GY28-6831
flowcharts
function of
interface with checker
interface with environmental system
Executor, access method
in INTRO. TO CONTROL PROGRAM LOGIC 36 GY28-6605
Executors
in INDEXED SEQUEN. ACCESS METHOD
30 GY28-6618
30 GY28-6604
in SEQUENTIAL ACCESS METHODS
Close
EOV/new volume
FEOV
lMAGELIB
introduction to
open
flow of control
introduction to
RAM option not used
RAM option used
stage 1
stage 2
stage 3
relation to I/O support
SETPRT
SYNAD/EOV
EXECX, in history
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

Exercising a location
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
Exercising storage locations
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
Model 155
Model 165
EXGEN
in COBOL (E)
EXHIBIT subroutine
in COBOL (F)
Exhibit Switch
in COBOL (E)
EXIO
---rn ONLINE TEST EXECUTIVE PROGRAM
EXIO Service module
in TCAM SERVICEABILITY AIDS
entry
functions
Existing structure
in TSO COMMAND PROCESSOR VOL1-ADD

24 GY24-5009
24 GY28-6382
24 GY24-5009
37 GY28-6651
30 GY30-2027

36 GY28-6771

Execute - Exit
in INTRO. TO CONTROL PROGRAM LOGIC 36
DCB
routine
in MFT SUPERVISOR
36
type 1 SVC routine
entry point
flowchart
functional description
module description
module synopsis
type
user specified routine
in TSO COMMAND PROCESSOR VOL1-LIST 36
to Formatting Routine (IKJEFA42)
to Parse (IKJPARS)
to Putline (IKJPUTL)
to validity check routine
in TSO COMMAND PROCESSOR VOL4-HELP 36
attention interruptions
code in DCBEX
list for OPEN routines
list in DCB
to DAIR
to PARSE
to HELP Processing Routine
to HELP Read Routine
to HELP Message Processing Routine
to IKJEFF02
EXIT
36
in MFT SUPERVISOR
entry point
flowchart
functional description
module description
module synopsis
Exit, attention
in TSO COMMAND PROC VOLI-DELETE
36
Exit block
in FORTRAN IV (H) COMPILER
25
Exit Effector
in MVT SUPERVISOR
36
Exit effector routine
in BASIC DIRECT ACCESS METHOD
30
to schedule ASI
30
in SEQUENTIAL ACCESS METHODS
Exit E15
in COBOL (F)
24
Exit E35
in COBOL (F)
24
Exit interface
in TSO COMMAND PROC VOL6-SUBMIT
36
flowchart
routine
use
Exit interface subroutine
in QUEUED TELECOMM. ACCESS METHOD 30
Exit label list
in FORTRAN IV (G) COMPILER
25
Exit lists
in COBOL (F)
24
Exit of tasks
in PL/I SUBROUTINE LIBRARY
29
EXIT PASS routine
in FORTRAN IV (G) COMPILER
25
Exit phase (IEYEXT)
in FORTRAN IV (G) COMPILER
25
definition
detailed description
general description
location in storage
rolls used by
Exit roll
in FORTRAN IV (G) COMPILER
25
def ini t'ion
description
general

GY28-6605
GY27-7236

GY28-6771

GY28-6774

GY27-7236

GY28-6771
GY28-6642
GY28-6659
GY28-6617
GY28-6604
GY28-6382
GY28-6382
GY28-6776

GY30-2002
GY28-6638
GY28-6382
GY28-6801
GY28-6638
GY28-6638

GY28-6638

Exit - Explicitly

160

Exit roll
i in FORTRAN IV (G) COMPILER
25 GY28-6638
l--------------------------------------(continued)
in IEYROL
in Parse
location in storage
Exit routine
in MVT SUPERVISOR
36 GY28-6659
description of
entry point name(s) of
flowchart of
module name for
synopsis of
in TSO COMAND PROC VOL2-CNCL/STATus36 GY28-6772
operation
parameter list
return codes
Exit routine, parameters to
in TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6775
Exit routine, STAI
in TSO COMMAND PROC VOL4-LISTALC
36 GY28-6774
Exit routines, attention
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
Exit routines for Logon
in TSO CONTROL PROGRAM
36 GY28-7199
Exit routines-IEBUPDTE
in UTILITIES
32 GY28-6614
Exit select subroutine
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
EXIT statement
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Exit to resident supervisor by
1130 system
in S/360-1130 DATA TMN. - FORTRAN 25 GY27-7161
Exit to TMP
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
EXITFLAG, field in EXITPARM
in TSO COMMAND PROC VOL5-0PERATOR
EXITPARM
in TSO COMMAND PROC VOL5-0PERATOR
data area
in data area directory
Exits
in TSO COMMAND PROC VOLI-BROADCAST
in TSO COMMAND PROC VOL2-ALLOCATE
common LINK to DAIR
link to PARSE
link to PUTLINE
return to TMP
STAI
in TSO COMMAND PROC VOL4-LISTBC
from IKJEES70
from IKJEES75
in TSO COMMAND PROC VOL6-WHEN/END
in TSO COMMAND PROCESSOR VOLI-ACCT
in TSO COMMAND PROCESSOR VOL2-CALL
in TSO COMMAND PROCESSOR VOL4-EXEC
attention
routine
STAE
STAI
Exits, attention
in TSO COMMAND PROC VOL2-DELETE
Exits (in module descriptions)
in TSO COMMAND PROC VOL5-LISTCAT
Exits for
in TSO COMMAND PROCESSOR VOL6-SEND
IEEVSDIO
I KJEESl 0
IKJEES11
Exits from IKJEFROO
in TSO COMMAND PROCESSOR VOL6-RUN
Exits from IKJEFT80

36 GY28-6775
36 GY28-6775

in TSO COMMAND PROC VOL6-TERMINAL
EXITWORK
in TSO COMMAND PROC VOL5-0PERATOR
data area
in directory

36 GY28-6774
36
36
36
36

GY28-6776
GY2 8- 6771
GY28-6772
GY28-6774

36 GY28-6772
36 GY28-6775
36 GY28-6776

36 GY28-6776

36 GY28-6775

EXITxxxx, fields in WEARTOGO
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
EXIT1
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
flowchart
processing at
EXITl routine name
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
in flowchart
EXITl subroutine
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY28-6772
flowchart
function
operation

---rn

EXLST, in WORKAREA
TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

EXNTRYO
in CRJE PLM

36 GY30-2011

EXNTRYl
in CRJE PLM

36 GY30-2011

EXNTRY2
in CRJE PLM

36 GY30-2011

Expand routine
in QUEUED TELECOMM. ACCESS METHOD
chart

30 GY30-2002

EXPBEG
--rnPL/I SYNTAX CHECKER PLM
in DATAAREA DSECT
start of expression pointer

29 GY33-8009

EXPEN
in ALGOL-TO-PL/1 LCP
36 GY28-6771
36 GY28-6772

36 GY28-6776

EXPEND
---rn-PL/I SYNTAX CHECKER PLM
end of expression pointer
in DATAAREA DSECT
Expiration date, data set
in TSO COMMAND PROC VOL2-DELETE
Expiration date of data set
in TSO COMMAND PROC VOL5-LISTDS
default used
for HISTORY processing
format conversion
Expiration dates
in TSO COMMAND PROC VOL4-LISTALC
processing of
Explicit close
in PL/I SUBROUTINE LIBRARY
Explicit invokation of EXEC
in TSO COMMAND PROCESSOR VOL4-EXEC
EXPLICIT OPEN/CLOSE
in PL/I SUBROUTINE LIBRARY
EXPLICIT roll
in FORTRAN IV (G) COMPILER
Explicitly generated statements, in
pretranslator phase
in PL/I (F) COMPILER

29 GY33-7006
29 GY33-8009

36 GY28-6772
36 GY28-6775

36 GY28- 6774

29 GY28-6801
36 GY28-6774
29 GY28-6801
25 GY28-6638
29 GY28-6800,

161
Exponent part
in ALGOL-TO-PL/1 LCP
Exponentiation
in COBOL (E)
Exponentiation symbol (**)
in PL/I SYNTAX CHECKER PLM

29 GY33-7006
24 GY24-5009
29 GY33-8009

Express
in GRAPHICS ACCESS METHOD
30 GY27-7113
attention handling
buffer management
control routines
Expression
in A~OL-To-PL/1 LCP
29 GY33-7006
Expression, definition
in PL/I (F) COMPILER
29 GY28-6800
Expression Context Matrix
in ALGOL (F) COMPILER
26 GY33-8000
Expression processing routine
in ALGOL-To-PL/1 LCP
29 GY33-7006
Expression Reducer
in COBOL (E)
24 GY24-5009
Expressions
in PL/I (F) COMPILER
29 GY28-6800
array bounds
initial value iteration factors
string lengths
structure
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
as subscripts
checking (service function II)
delimiters (EXPBEG,EXPEND)
in AREA attribute
in Dimension attribute
in string attributes
ISUB found in (EISUBFL)
iteration factor (INITIAL attribute)
mode (ARRF)
right parenthesis encloses
expression (RPE)
subscript (RPS)
within subscript
EXPRO
---rn
ALGOL-TO-PL/1 LCP
in FORTRAN IV-TO-PL/1 LCP

29 GY33-7006
29 GY33-7000

EXPROL3
in ALGOL-TO-PL/1 LCP

29 GY33-7006

EXRETLK
in CRJE PLM

36 GY30-2011

EXT operator
in FORTRAN IV (H) COMPILER
EXTADR register
in FORTRAN IV
definition
description

(G)

COMPILER

25 GY28-6642
25 GY28-6638

Extend routine
in CATALOG MANAGEMENT
30 GY28-6606
catalog
DADSM
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
[sCB creation
extent table construction
flow of control
input
modules loaded
VTOC update
in TSO CATALOG MANAGEMENT
36 GY28-6745
catalog
bADSM
'extended search' feature

Exponent - External
in PL/I SUBROUTINE LIBRARY
29
Extended dictionary
in PL/I (F) COMPILER
29
Extended error handling facility
in FORTRAN IV (G) COMPILER
25
in FORTRAN IV (H) COMPILER
25
Extended logout
in MACHINE-CHECK HANDLER, M135/145 30
mask bit
in MACHINE-CHECK HANDLER, M155/165 30
Extended Precision Floating Point
Decimal S~mulator
in MFT SUPERVISOR
36
entry point
functional description
module description
Extended Precision Floating Point Divide
in INITIAL PROGRAM LOADER AND NIP 36
hardware feature
simulation
simulator routine
Extended search
in BASIC DIRECT ACCESS METHOD
30
determining limit
at end of extent
for pre-format programs
for self-format programs
for update programs
Extending SYSCTLG data set
in CATALOG MANAGEMENT
30
in TSO CATALOG MANAGEMENT
36
Extent
---rn-BASIC DIRECT ACCESS METHOD
availability
periods of
in LOADER
chain entry format
processing
in TESTRAN
Extent entry location algorithm
in INPUT/OUTPUT SUPERVISOR
Extent list
in MVT SUPERVISOR
construction of
definition of
normal release of
in TSO COMMAND PROCESSOR VOL7-TEST
format of
Extent table
in DIRECT ACCESS DEVICE SPACE MGT.
Extent tables
in ONLINE TEST EXECUTIVE PROGRAM
discussion of
in operation diagram
Extents
in INDEXED SEQUEN. ACCESS METHOD
in ONLINE TEST EXECUTIVE PROGRAM

GY28-6801
GY28-6800
GY28-6638
GY28-6642
GY27-7237
GY27-7198
GY27-7236

GY28-6661

GY28-6617

GY28-6606
GY28-6745

30 GY28-6617
31 GY28-6714
37 GY28-6611
30 GY28-6616
36 GY28-6659

36 GY28-6777
30

GY28~6607

37 GY28-6651

30 GY28-6618
37 GY28-6651

EXTERNAL (keyword attribute)
in PL/I SYNTAX CHECKER PLM
29
attribute classification
checking
in GENERIC attribute list
subroutine EXTERN (IKM23)
External action routine
in JOB MANAGEMENT
36
External damage
in MACHINE-CHECK HANDLER, M155/165 30
Model 155
Model 165
External dummy section
in LINKAGE EDITOR (F)
31
External dummy section (pseudo register)
in LOADER
31
address assignment

GY33-8009

GY28-6613
GY27-7198

GY28-6667
GY28-6714

E

External -

EXTRACT

External dummy section (pseudo register)
I in LOADER
31 GY28-6714
l--------------------------------------(continued)
definition of
entry processing
displacement and boundary
alignment
illustration of
PR entry
External First-Level Interruption Handler
in MVT SUPERVISOR
36 GY28-6659
description of
entry point name(s) of
flowcharts of
module name for
synopsis of
External FLIH
in MVT SUPERVISOR
36 GY28-6659
External functions
in FORTRAN IV (E)
25 GY28-6601
External interrupt routine
in JOB MANAGEMENT
36 GY28-6613
External interruptions
in MVT SUPERVISOR
36 GY28-6659
description of
External library routines
in PL/I (F) COMPILER
29 GY28-6800
External names
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
External reference (ER)
in LINKAGE EDITOR (F)
31 GY28-6667
definition
entry processing
non-resolution processing
resolution processing
subtypes
unresolved ER processing
in LOADER
31 GY28-6714
definition of
entry processing
match processing
no-match processing
function of
unresolved ER messages
unresolved ER processing
External reference table
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
External reference tables
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
for GFX routines
for IKDINPRO
for System/360 routines
for 1130 routines
External references
in FORTRAN IV (E)
25 GY28-6601
generation of ESD and RLD card images
for
in GRAPHIC SUBRTN. PACKAGE
25 GY27-7152
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
External routines
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
External service routines
in TSO COMMAND PROCESSOR VOL1-ACCT 36 GY28-6771
in ACCOUNT processing hierarchy
IKJDAIR
IKJEFHOO
IKJSCAN
IKJSTCK
EXTERNAL statement
in FORTRAN IV (E)
25 GY28-6601
compile-time processing of
in FORTRAN IV (H) COMPILER
25 GY28-6642
in FORTRAN IV-TO-PL/1 LCP
29 GY33-7000
External subroutines
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
branching addresses to (VIKMxxx)

162
under module names (IKMxxx)
External symbol definition
in LINKAGE EDITOR (F)
31 GY28-6667
External symbol Dictionary
in COBOL (F)
24 GY28- 6382
in FORTRAN IV (E)
25 GY28-6601
in FORTRAN IV (H) COMPIL~R
25 GY28-6642
in PL/I (F) COMPILER
29 GY28- 6800
ESD cards
in data flow diagram
External symbol dictionary (ESD)
in LINKAGE EDITOR (F)
31 GY28-6667
contents
entry types
identifier
introduction to
processing (IEWLMESD)
description of
charts
synopsis
operation diagram
record
in LOADER
31 GY28-6714
defini tion of
entry types
identifier
processing
description of
introduction to
operation diagrams for
tables
processor (IEWLESD)
flowcharts of
synopsis of
record format
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
External symbol dictionary identification
number (ESDID)
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
Externals in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
EXTPARM, field in STAEWA
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

Extra
---rn

29 GY33-8009

storage
PL/I SYNTAX CHECKER PLM
Extra storage flag
in PL/I SYNTAX CHECKER PLM

Extract
in SORT/MERGE
data
module
routine
EXTRACT
in MFT SUPERVISOR
entry point
flowchart
functional description
module description
module synopsis
Extract data set
in GRAPHIC JOB PROCESSOR SUPPORT
summary of functions
use of
in S/360 JOB PROCESSING 1130/2250
acti vi ty chart
function of
use of
EXTRACT macro
in PL/I SUBROUTINE LIBRARY
in TSO COMMAND PROC VOL2-ALLOCATE
in TSO COMMAND PROC VOL6-PROFlLE
EXTRACT macro instruction
in LOADER

29 GY33-8009
33 GY28-6597

36 GY27-7236

36 GY27-7159
36 GY27-7166

29 GY28-6801
36 GY28-6772
36 GY28-6776
31 GY28-6714

163
EXTRACT macro instruction
I in LOADER
31 GY28-6714
L--------------------------------------(continued}
issuance of
in TSO COMMAND PROC VOLI-BROADCAST 36 GY28-6771
in TSO COMMAND PROC VOLI-SUBRTNS
36 GY28-6771
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
in TSO COMMAND PROC VOL4-LISTALC
36 GY28-6774
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
in TSO COMMAND PROC VOL6-PROTECT
36 GY28-6776
in TSO COMMAND PROC VOL6-RENAME
36 GY28-6776
in TSO COMMAND PROC VOL6-TERMINAL 36 GY28-6776
in TSO COMMAND PROCESSOR VOLI-ACCT 36 GY28-6771
in TSO COMMAND PROCESSOR VOLI-ADD 36 GY28-6771
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
in TSO COMMAND PROCESSOR VOLI-LIST 36 GY28-6771
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
in TSO TMP & SERVICE ROUTINES
36 GY28-6770
use by Terminal Monitor Program
Extract record
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
constructed by IKAPBEGO
constructed h¥ IKAPCSRO
constructed by IKAPDESO
constructed by IKAPENTO
constructed by IKAPLONO
constructed by IKAPSPEO
use in recall operations
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
definition of
in CCTPWKA for IKAPBEGO
in CCTPWKA for IKAPDESO
in CCTPWKA for IKAPENTO
in CCTPWKA for IKAPLONO
in CCTPWKA for IKAPSPEO
in CCTPWKA for IKAPWRIO
Extract Routine
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
chart
description
example of use in defining a job
in MVT SUPERVISOR
36 GY28-6659
description of
entry point name(s} of
flowchart of
module name for
synopsis of
Extracting information
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
from Command Input Buffer
from frames
Extractor module IFCEREPO (165)
in UTILITIES
32 GY28-6614
EXTRN

---rn ASSEMBLER

(F)

21 GY26-3700

EXTRN virtual
in COBOL (F)

24 GY28-6382

EXTRNB
in ASSEMBLER (F)

21 GY26-3700

EXxxxx fields in TIMESBUF
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
EOIDATDF data area,
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
cross references
EOlxxxxx fields in EOlDATDF
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774

EXTRACT - FALL
E15
in COBOL (F)
E15 routine
in SORT/MERGE
address in parameter list

24 GY28-6382
33 GY28-6597

E23
in COBOL (E)
in COBOL (F)
E35 routine
in SORT/MERGE
address in parameter list
E61 routine
---in SORT/MERGE

24 GY24-5009
24 GY28-6382
33 GY28-6597

33 GY28-6597

K (ENVIRONMENT opti on)
in PL/I SYNTAX CHECKER PLM
F/E format items
in PL/I SUBROUTINE LIBRARY
F field
in SORT/MERGE
F format
in FORTRAN IV-TO-PL/l LCP
F-format code
in FORTRAN IV-TO-PL/l LCP
F-level PL/I language
in PL/I SYNTAX CHECKER PLM
F-producing element
in FORTRAN IV SYNTAX CHECKER PLM
definition of
effect on scan
effect on source pointer
in active and passive line
F-unnesting
in FORTRAN IV SYNTAX CHECKER PLM
definition of
example of

29 GY33-8009
29 GY28-6801
33 GY28-6597
29 GY33-7000
29 GY33-7000
29 GY33-8009
25 GY28-6831

25 GY28-6831

F( 123}
---rn-ALGOL-TO-PL/l LCP

29 GY33-7006

F( 80}
~ ALGOL-TO-PL/l LCP

29 GY33-7006

Factored attribute table
in PL/I (F) COMPILER
Factored attributes
in PL/I (F) COMPILER
Factoring of attributes
in PL/I SYNTAX CHECKER PLM
in DECLARE statement
FADDBC, field in FLAGS
in TSO COMMAND PROC VOLS-OPERATOR

29 GY28-6800
29 GY28-6800
29 GY33-8009

36 GY28-6775

Fail Soft Storage Element Map
(FSSEMAP)
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
in MVT SUPERVISOR
36 GY28-6659
format of
Failure
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
Failure messages, DAIR
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
FALL, -field in FLAGS
---rn TSO COMMAND PROC VOLS-OPERATOR

36 GY28-6775

~

Ii

FANYXNV - FENQUSD

FANYINV, field in FLAGS
in TSO COMMAND PROC VOL5-0PERATOR
Fastable
in REMOTE JOB ENTRY
FAZ25-IEKP25
FORTRAN IV (H) COMPILER

164
36 GY28-6775

25 GY28-6642

FBADIO, field in FLAGS
---rn-TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

FBADPUTL, field in COMMON
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776

FBADTPUT, field in FLAGS
in TSO COMMAND PROC VOL5-0PERATOR

32 GY28-6614
24 GY28- 6382

36 GY30-2005

---rn

FBADSEND" field in FLAGS
in TSO COMMAND PROC VOL5-0PERATOR

in UTILITIES
FD-Text
in COBOL (F)
definition
FDBASE
- - r r lCOBOL (E)

24 GY24-5009

FDBCHK
--rrlCOBOL (E)

24 GY24-5009

FDBCKl
- - r r lCOBOL (E)

24 GY24-5009

FDCBST
--rrlCOBOL (E)

24 GY24-5009

FDCHK
in COBOL (E)

24 GY24-5009

36 GY28-6775
36 GY28-6775
FDDIR

FBODRITA, field in FLAGS
in TSO COMMAND PROC VOL5-0PERATOR
FBQE
in MVT SUPERVISOR

36 GY28-6775

---rn

COBOL (E)

FDEL, field in FLAGS
in TSO COMMAND PROC VOL5-0PERATOR

24 GY24-5009
36 GY28-6775

36 GY28-6659
FDGO

FBllG
in CRJE PLM

FCEFLG switch
---rn-ONLINE TEST EXECUTIVE PROGRAM

29 GY28-6801

FCLT50-IEKRFL
---rn-FORTRAN IV (H) COMPILER
FCONSOL, field in FLAGS
in TSO COMMAND PROC VOL5-0PERATOR

FDIND
in COBOL (E)

24 GY24-5009

FDKEY
in COBOL-TO-PL/l LCP

29 GY33-7007

FDRCHK
- - r r lCOBOL (E)

24 GY24-5009

FDREL
in COBOL (E)

24 GY24-5009

FDSCN routine
in COBOL (F)

24 GY28-6382

FDVALU
--rrlCOBOL (E)

24 GY24-5009

FE/DAU
-- in ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

Features, optional
in BASIC TELECOMM. ACCESS METHOD

30 GY30-2001

29 GY28-6801
37 GY28-6651

FCHAIN, field in COMMON
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
FCHNMSG, field in FLAGS
in TSO COMMAND PROC VOL5-0PERATOR

24 GY24-5009

36 GY30-2011

in TSO COMMAND PROC VOL4-LISTBC
36 GY28-6774
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
FCB (File Control Block)
---in PL/I SUBROUTINE LIBRARY
FCB history flag
in PL/I SUBROUTINE LIBRARY

~n COBOL (E)

36 GY28-6775
25 GY28-6642
36 GY28-6775

FCSCAN
---rn-COBOL-To-PL/l LCP

29 GY33-7007

FCT
---in GRAPHIC SUBRTN. PACKAGE

25 GY27-7152

FED (Format Element Desc;iptor) usage
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
FED format
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Feedback module
in BASIC DIRECT ACCESS METHOD

30 GY28-6617

FD
FD

FD
FD
FD
FD
FD

in ASSEMBLER (F)
in COBOL-TO-PL/l LCP
Dictionary Entries
in COBOL (F)
format
Data IC-Text format
Entries 'in Data Attribute
in COBOL (E)
entry, processing
in COBOL-TO-PL/1-LCP
table-IEBDG
in UTILITIES
table operations-IEBDG
in UTILITIES
table value changes-IEBDG

21 GY26-3700
29 GY33-7007
24 GY28-6382

FEFO
---rn TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
FEFO queuing
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
FENDTJB, field in FLAGS
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

FENDUSL, field in FLAGS
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

24 GY24-5009
29 GY33-7007
32 GY28-6614
32 GY28-6614

FENQUSD, field in COMMON
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776

165

FERQ1 - Fill.inq

FENQ1, field in COMMON
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776

FII - Phase FI initialization
in ASSEMBLER (F)

FEOV executor (IGC0003A - SVC 31)
---rn SEQUENTIAL ACCESS METHODS
FEOV SYNAD routine
in SEQU~~TIAL ACCESS METHODS

File
in PL/I SUBROUTINE LIBRARY
addressing
attributes
control block
in control block chaining
FILE (keyword option)
in PL/I SYNTAX CHECKER PLM
in CLOSE statement
in GET or PUT statement
subroutine FILE (IKM21)
in OPEN statement
subroutine FILE (IKM22)
in record I/O statements
File access method
in ALGOL-TO-PL/1 LCP
File conditions, dictionary entries
in PL/I (F) COMPILER
File control block
in PL/I SUBROUTINE LIBRARY
address
discussion
File control block (FCB)
in PL/I SUBROUTINE LIBRARY
FILE-CONTROL paragraph, processing
in COBOL-TO-PL/1 LCP
File/data set relationship
in PL/I SUBROUTINE LIBRARY
File Find Routine
in COBOL (E)
File index
in CRJE PLM
File index track
in CRJE PLM
File marks
in DIRECT ACCESS DEVICE SPACE MGT.
File mask
in ONLINE TEST EXECUTIVE PROGRAM
File mask control byte
in ONLINE TEST EXECUTIVE PROGRAM
File Name Reference Elements
in COBOL (F)
File Name References
in COBOL (F)
Procedure IC-Text format
File protected tape-IEHINITT
in UTILITIES
File record
in COBOL-TO-PL/1 LCP
File register
in PL/I SUBROUTINE LIBRARY
File Section
in COBOL (F)
File size
in SORT/MERGE

30 GY28-6604
30 GY28-6604

FERINT switch

~ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

FERRID, field in FLAGS
~TSO COMMAND PROC VOL5-oPERATOR

36 GY28-6775

FERRSYN, field in FLAGS
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

FETBLBLD
in UPDATE ANALYSIS PROGRAM

36 GY28-7106

Fetch, program
in INTRO. TO CONTROL PROGRAM LOGIC 36 GY28-6605
Fetch DCB
36 GY28-6613
in JOB MANAGEMENT
Fetch DCB processing routine
36 GY28-6613
in JOB MANAGEMENT
FFEFLG switch
in ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

in TSO COMAND PROC VOL2-CNCL/STATUS36
facility
privilege
SVC
FIB facility
in TSO COMMAND PROC VOL5-oUTPUT
36
in TSO COMMAND PROC VOL6-sUBMIT
36
FIB privilege, in IKJEFF60
in TSO COMMAND PROC VOL5-0UTPUT
36
FICLS - Phase FI Phase close
in ASSEMBLER (F)

GY28-6772

GY28-6775
GY28-6776
GY28-6775

21 GY26-3700

Field, record

~ COBOL-TO-PL/1 LCP

29 GY33-7007
Field contents of syntax checker program
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
debugging hints for
Field count
in FORTRAN IV (H) COMPILER
25 GY28-6642
Field engineering data adapter unit
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
Field select (IEBDG)
in UTILITIES
32 GY28-6614
FIELDLENGTH
in COBOL-TO-PL/1 LCP
29 GY33-7007

FIFO
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
FIFO queuing described
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
diagram of

21 GY26-3700
29 GY28-6801

29 GY33-8009

29 GY33-7006
29 GY28-6800
29 GY28-6801

29 GY28-6801
29 GY33-7007
29 GY28-6801
24 GY24-5009
36 GY30-2011
36 GY30-2011
30 GY28-6607
37 GY28-6651
37 GY28-6651
24 GY28-6382
24 GY28-6382
32 GY28- 6614
29 GY33-7007
29 GY28-6801
24 GY28-6382
33 GY28-6597

Files

---rn ALGOL-TO-PL/1

in FORTRAN IV (E)
FILEST routine
- r i lCOBOL (F)

LCP

29 GY33-7006
25 GY28-6601
24 GY28-6382

FIGCON

~COBOL-TO-PL/1 LCP

29 GY33-7007

FILFND
- r i lCOBOL (E)

24 GY24-5009

FILFN1
-rilCOBOL (E)

24 GY24-5009

FIGSW

---rn COBOL-TO-PL/1

LCP

Figurative Constant References
in COBOL (F)
Procedure IC-Text format
Figures
in TSO COMMAND PROC VOL4-LISTBC

29 GY33-7007
24 GY28-6382

36 GY28-6774

Filling a pattern field-IEBDG
in UTILITIES
32 GY28-6614
Filling internal parameter table-IFCEREPO
(165)
in UTILITIES
32 GY28-6614

Ii

166

FILMSK - First

FILMSK switch
---rn-ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

FILSCN routine
(F)

24 GY28-6382

----rrlCOBOL

FILTEX- IEKPFl'

----rrlFORTRAN

IV

(li)

COMPILER

Final assembly logical phase
(F) COMPILER
Final copy service routine
in TSO COMMAND PROCESSOR VOL3-EDIT
Final linked address
in LINKAGE EDITOR (F)
Final merge phase
in SORT/MERGE
charts
decision tables
determining input units for
functions of
module list
name on SYSLMOD
Final output
in TSO COMMAND PROCESSOR VOL4-EXEC
Final processing
in LOADER
description of
overview
Final processing (IEWLMFNL)
in LINKAGE EDITOR (F)
description of
charts
synopsis
operation diagram
objective
overview
Final processing routine
in TSO COMMAND PROCESSOR VOL3-EDIT
error and exceptional conditions
method of operation diagram
Final relocation constant
in LINKAGE EDITOR (F)

---rn PL/I

25 GY28-6642
29 GY28-6800
36 GY28-6773
31 GY28-6667
33 GY28-6597

SUPERVISOR
ATTACH and
Dispatcher and
entry point
flowchart
functional description
module description
module synopsis
SVC SLIH and
FINCH request block (FRB)
in MFl' SUPERVISOR
creating
format of
queuing
removing from queue

Find
---rn SEQUENTIAL ACCESS METHODS
C option (macro expansion)
D option (IGC018 - SVC 18)
BLDLTAB option not used
BLDLTAB option used
FIND
in COBOL-TO-PL/1 LCP
FIND macro
in TSO COMMAND PROCESSOR VOL4-HELP
data set member
FIND macro instruction
in TSO COMMAND PROCESSOR VOL4-EXEC
Find next PL/I statement
in PL/I SYNTAX CHECKER PLM

Finding members to process-IEBPTPCH
in UTILITIES
Finding node points
in TSO COMMAND PROCESSOR VOL1-ADD

32 GY28-6614
36 GY28-6771

FINGEN

36 GY28-6774
31 GY28-6714

~COBOL-TO-PL/1 LCP

29 GY33-7007

FING1
in COBOL-TO-PL/1 LCP

29 GY33-7007

FINISH condition

~PL/I SUBROUTINE LIBRARY

29 GY28-6801

FINISH-IEKJFI
in FORTRAN IV (H) COMPILER

25 GY28-6642

31 GY28-6667
FINPG

--rn

36 GY28-6773

ALGOL-TO-PL/1 LCP

29 GY33-7006

FINREDEF
in COBOL-TO-PL/1 LCP

29 GY33-7007

FIOCS,FIOCS#
---rn
FORTRAN

25 GY28-6642

IV (H) COMPILER

FIPUT
in COBOL (E)

24 GY24-5009

First block
---rn
TSO COMMAND

36 GY28-6774

31 GY28-6667

FINCH

---rn MFl'

more input needed for
DIAGNSFL
return code=12
subroutine SOURCEC (IKMOOx)
FIND statement
in FORTRAN IV (E)
25 GY28-6601
compile-time processing
of
object-time processing
of
FIND subcommand
in TOO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
summary of operations
syntax

36 GY27-7236

36 GY27-7236

30 GY28-6604

29 GY33-7007
36 GY28-6774
36 GY28-6774
29 GY33-8009

PROCESSOR VOL4-EXEC
First buffer prefix
in TELECOMMUNICATION ACCESS METHOD
First CPU Signal routine
in MVT SUPERVISOR
description of
entry point name of
module name for
First element
in TSO TMP & SERVICE ROUTINES
First error
in ONLINE TEST EXECUTIVE PROGRAM
communication at
discussion of
option
First Level Directory, format
in PL/I (F) COMPILER
First level I/O message fields
in TSO COMMAND PROC VOL1-SUBRTNS
First level message
in TSO COMMAND PROC VOL6-WHEN/END
in TSO COMMAND PROCESSOR VOL3-EDIT
definition
handling
First level message segment
in TSO COMMAND PROC VOL5-0PERATOR
First-level messages
in TSO COMMAND PROC VOL4-LISTALC
in TSO COMMAND PROC VOL6-RENAME
in TSO COMMAND PROCESSOR VOL4-EXEC
First level segments, number of
in TSO COMMAND PROC VOL5-0PERATOR

30 GY30-2029
36 GY28-6659

36 GY28-6770
37 GY28-6651

29 GY28-6800
36 GY28-6771
36 GY28-6776
36 GY28-6773

36 GY28-6775
36 GY28-6774
36 GY28-6776
36 GY28-6774
36 GY28-6775

167
First pass RLD buffer
in LINKAGE EDITOR (F)
First routine (1ST-ROUT)
in COBOL (F)
First Task Entry routine
in GRAPHICS ACCESS METHOD
First-time logic switch
in MVT SUPERVISOR
First time users of manual
in PLiI SYNTAX CHECKER PLM
FIRSTQUAL
in COBOL-TO-PL/l LCP
FIRSTRE
in COBOL-TO- PLil LCP
FIXED (keyword attribute)
in PLiI SYNTAX CHECKER PLM
checking as arithmetic attribute
in ENTRY, PROCEDURE statements
Fixed area (Permanent storage
Allocation)
in MACHINE-CHECK HANDLER, M135/145
FIXED BINARY (31)
in ALGOL-To-PLIl LCP
Fixed data to library
in PL/I SUBROUTINE LIBRARY
Fixed-length blocked records
in COBOL (F)
Fixed-length blocks
in BASIC DIRECT ACCESS METHOD
Fixed-length records
in SORT/MERGE
block/deblock modules
completion codes
format codes
format in RSA
merging techniques
movement
move modules
nodes
sorting technique
sort modules
tree structure
Fixed-length unblocked records
in COBOL (F)
Fixed logout
in MACHINE-CHECK HANDLER, M135/145
in MACHINE-CHECK HANDLER, M155/165
Fixed logout, saving
in MACHINE-CHECK HANDLER, M155/165
FIXED PDE
in TSO COMMAND PROCESSOR VOL6-RUN
Fixed point constants
in PL/I SYNTAX CHECKER PLM
binary., decimal
code assignment
Fixed point edit routine
in TESTRAN
Fixed point rooltiplication skeleton
instructions
in FORTRAN IV (H) COMPILER
Fixed-point overflow interrupt
in PLiI SUBROUTINE LIBRARY
Fixed Storage Area
in ALGOL (F) COMPILER
Fixed storage locations
in MACHINE-CHECK HANDLER, M135/145
FIXPI,FIXPI#
in FORTRAN IV (H) COMPILER
FL AC roll
in FORTRAN IV (G) COMPILER
FL CONST roll
in FORTRAN IV (G) COMPILER

31 GY28-6667
24 GY28-6382
30 GY27-7113
36 GY28-6659
29 GY33-8009
29 GY33-7007
29 GY33-7007
29 GY33-8009

30 GY27-7237
29 GY33-7006
29 GY28-6801
24 GY28-6382
30 GY28-6617
33 GY28-6597

24 GY28-6382
30 GY27-7237
30 GY27-7198
30 GY27:"'7198
36 GY28-6776
29 GY33-8009

37 GY28-6611
25 GY28-6642
29 GY28-6801
26 GY33-8000
30 GY27-7237
25 GY28-6642
25 GY28-6638
25 GY28-6638

First - Flags
FLAEND
in COBOL (E)
Flag, load module test
in TESTRAN
Flag, member name present
in TSO COMMAND PROCESSOR VOL2-CALL
Flag area, IBM
in TSO COMMAND PROC VOL1-DELETE
FLAG option
in COBOL (F)
Flag table
in TESTRAN
Flag value assignments (Phase F3)
in ASSEMBLER (F)
Flag Word
in TSO TMP & SERVICE ROUTINES
format
use
Flagged records
in SORT/MERGE

24 GY24-5009
37 GY28-6611
36 GY28-6772
36 GY28-6771
24 GY28-6382
37 GY28-6611
21 GY26-3700
36 GY28-6770

33 GY28-6597

Flags
in CATALOG MANAGEMENT
30
in user's parameter list
in generation index pointer entry
in FORTRAN IV (G) COMPILER
25
in PL/I SYNTAX CHECKER PLM
29
debugging hints for
36
in TSO CATALOG MANAGEMENT
in user's parameter list
in generation index pointer entry
in TSO COMMAND PROC VOLI-DELETE
36
ABEND
account offset chaining
dummy chaining
dummy offset control
IBM area
name command list
offset chaining
offset control
password command list
UIDI
userid command list
in TSO COMMAND PROC VOL2-ALLOCATE 36
for data set status
to control actions taken by DAIR
in TSO COMMAND PROC VOL4-LISTBC
36
for data set status
for I/O operations
for message information
set for life of LISTBC
in TSO COMMAND PROCESSOR VOL4-EXEC 36
in 7074 EMULATE FOR M/165
DIL trap flag
DIL Count flag
in communications region
in CST
in SUB
FLAGS
in TSO COMMAND PROC VOL5-0PERATOR 36
data area
in directory
FLAGS, field in common
in TSO COMMAND PROC VOL5-0PERATOR 36
FLAGS, field in COMMON
in TSO COMMAND PROCESSOR VOL6-SEND 36
Flags, in master scheduler resident data
area
in JOB MANAGEMENT
36
FLAGS DSECT (IKM22)
in PL/I SYNTAX CHECKER PLM
29
Flags for DAIR
in TSO COMMAND PROCESSOR VOL2-CALL 36

GY28-6606
GY28- 6638
GY33-8009
GY28-6745
GY28-6771

GY28-6772
GY28-6774

GY28-6774
GY27-7228

GY28-6775

GY28-6775
GY28-6776
GY28-6613
GY33-8009
GY28-6772

Ii

168

J!"LAGWORD - Plowcharts

FLAG WORD
in TSO COMMAND PROC VOL5-0PERATOR
data area
in data area directory
pointer to
FLGNST, field in DLCTLR
in TSO COMMAND PROC VOL1-DELETE

in ALGOL-TO-PL/1 LCP
Flow

----in TSO COMMAND PROCESSOR VOL1-ADD

36 GY28-6771

FLIST, field in FLAGS
TSO COMMAND PROC VOL5-0PERATOR

---rn

36 GY28-6775

FLISTALL, field in FLAGS
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

FLNM
--rn COBOL (E)

36 GY28-6775
24 GY24-5009

FLOAT

---rn ALGOL-TO-PL/1 LCP

29 GY33-7006
25 GY28-6642

in FORTRAN IV (H) COMPILER
FLOAT (keyword attribute)
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
checking as arithmetic attribute
in ENTRY, PROCEDURE statements
FLOAT (16)
in ALGOL-To-PL/1 LCP
29 GY33-7006
Float-arithmetic generic functions
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
FLOAT in-line function
in FORTRAN IV (E)
25 GY28-6601
compile-time processing of
FLOATFL
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
Floating Point
in COBOL (E)
24 GY24-5009
FLOATING POINT and EXPONENTIATION Generator
in COBOL (E)
24 GY24-5009
Floating-point arguments
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Floating point constants
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
binary, decimal
code assignment
Floating point edit routine
in TESTRAN
37 GY28-6611
Floating-point emulation
in 7074 EMULATE FOR M/165
GY27-7228
Floating-point exception
in EMULATOR FOR 7090/7094/7094II
35 GY27-7187
Floating-Point Literal References
in COBOL (F)
24 GY28-6382
Procedure IC-Text format
Floating-point operations
in COBOL (F)
24 GY28-6382
Floating-Point registers (FPRs)
in EMULATOR FOR 7090/7094/7094II
35 GY27-7187
contents
initialization
Floating-Point Trap mode
in EMULATOR FOR 7090/7094/7094II
35 GY27-7187

~,

field in COMMON

in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
FLOGON, field in FLAGS
in TSO COMMAND PROC VOL5-0PERATOR
FLOOR built-in function

36 GY28-6771

of control information

FLGR01, field in DPOB
in TSO COMMAND PROC VOL1-DELETE
36 GY28-6771
FLGR01, field in DROB
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

FLISTING, field in FLAGS
in TSO COMMAND PROC VOL5-0PERATOR

29 GY33-7006

36 GY28-6775

36 GY28-6775

of data
Flow control entry
in GRAPHIC SUBRTN. PACKAGE
25
Flow control management
in GRAPHIC SUBRTN. PACKAGE
25
Flow control structure
in GRAPHIC SUBRTN. PACKAGE
25
Flow control table
in GRAPHIC SUBRTN. PACKAGE
25
Flow data
in TSO COMMAND PROC VOL5-0PERATOR 36
Flow diagrams for modules
in INPUT/OUTPUT SUPPORT
30
Flow of control
in GRAPHIC JOB PROCESSOR SUPPORT
36
in GFX
in GJP
in S/360 JOB PROCESSING 1130/2250 36
in GFX
in system/360 SGJP program
in 1130 SGJP program
in SEQUENTIAL ACCESS METHODS
30
BSAM routines
executors
QSAM routines
Flow of control-IBCRCVRP
in UTILITIES
32
Flow of control-IEBEDIT
in UTILITIES
32
Flow of control-IEBUPDAT
in UTILITIES
32
Flow of control-IEHATLAS
in UTILITIES
32
Flow of control information
in TSO COMMAND PROC VOL5-0PERATOR 36
Flow of logic
in TSO COMMAND PROC VOL6-WHEN/END 36
in TSO COMMAND PROCESSOR VOL4-EXEC 36
Flow of the program
in GRAPHIC JOB PROCESSOR SUPPORT
36
Flow trace, not carried out by compiler
in PL/I (F) COMPILER
29
FLOW/TRACE facilities
in PL/I (F) COMPILER
29
FLOW/TRACE markers
in PL/I (F) COMPILER
29
Flowchart
in TSO COMMAND PROC VOL4-LISTBC
cross-referencing
list of
referencing philosophy
in TSO COMMAND PROCESSOR VOL6-TIME
Flowchart conventions
in EMULATOR FOR 7090/7094/7094II
Flowchart cross reference
in TESTRAN
Flowchart cross-referencing
in TSO COMMAND PROC VOL6-WHEN/END
Flowchart/label references
in GRAPHICS ACCESS METHOD
Flowchart symbols
in GRAPHICS ACCESS METHOD
in GRAPHICS PROBLEM ORIENTED RTNS.
Flowchart Symbols, Explanation of
in COBOL (E)
Flowcharts
in ALGOL (F) COMPILER
in CATALOG MANAGEMENT
in MACHINE-CHECK HANDLER, M135/145
in PL/I (F) COMPILER

GY27-7152
GY27-7152
GY27-7152
GY27-7152
GY28-6775
GY28-6609
GY27-7159
GY27-7166

GY28-6604

GY28-6614
GY28-6614
GY28-6614
GY28-6614
GY28-6775
GY28-6776
GY28-6774
GY27-7159
GY28-6800
GY28-6800
GY28-6800

36 GY28-6774

36 GY28-6776
35 GY27-7187
37 GY28-6611
36 GY28-6776
30 GY27-7113
30 GY27-7113
30 GY27-7110
24 GY24-5009
26
30
30
29

GY33-8000
GY28-6606
GY27-7237
GY28-6800

169
Flowcharts
I in PLII (F) COMPILER
29 GY28-6800
l--------------------------------------(continued)
organization
overall compiler logic
resident control phase
29 GY33-8009
in PL/I SYNTAX CHECKER PLM
list in directory
of syntax checker modules
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
for GFX routines
for System/360 routines
for 1130 routines
in S/360-1130 DATA TMN. - FORTRAN 25 GY27-716l
Systeffi/360 conversion
routines
Systern/360 data
transmission routines
1130 data transmission
routines
in SORT/MERGE
33 GY28-6597
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
in TEST RAN
37 GY28-6611
in TSO CATALOG MANAGEMENT
36 GY28-6745
in TSO COMAND PROC VOL2-CNCL/STATUS36 GY28-6772
table of
in TSO COMMAND PROC VOLI-BROADCAST 36 GY28-6771
36 GY28-6771
in TSO COMMAND PROC VOLl-DELETE
in TSO COMMAND PROC VOL1-SUBRTNS
36 GY28-677l
IKJEFA51
IKJEFA52
IKJEFA53
IKJEFA54
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
in TSO COMMAND FROC VOL4-LISTALC
36 GY28-6774
in TSO COMMAND PROC VOL5-LISTCAT
36 GY28-6775
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
IKJEHDSl
IKJEHMEM
in TSO COMMAND PROC VOL6-PROFILE
36 GY28-6776
in TSO COMMAND PROC VOL6-PROTECT
36 GY28-6776
in TSO COMMAND PROC VOL6-RENAME
36 GY28-6776
in TSO COMMAND PROC VOL6-SUBMIT
36 GY28-6776
in TSO COMMAND PROC VOL6-TERMINAL 36 GY28-6776
in TSO COMMAND PROC VOL6-WHEN/END 36 GY28-6776
in TSO COMMAND PROCESSOR VOLl-ACCT 36 GY28-6771
in TSO COMMAND PROCESSOR VOLI-ADD 36 GY28-677l
overview
IKJEFAlO
IKJEFAl2
IKJEFAl3
lateral scan subroutine
in TSO COMMAND PROCESSOR VOLI-LIST 36 GY28-6771
for IKJEFA40
for IKJEFA42
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
IKJEFEOl
IKJEFE02
IKJEFE03
IKJEFE04
IKJEFEOS
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
cross references
list of
program organization
related processing
Flowcharts, list of
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY28-6772
Flowcharts of IKJEFROO (RUN)
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
FLUSH

---rn

TSO COMMAND PROC VOL6-SUBMIT
in history

36 GY28-6776

Flowcharts - For

use
Flush closedown
in TELECOMMUNICATION ACCESS METHOD
Flush mode processing
in MVT JOB MANAGEMENT
Flush requests
in FORTRAN IV (E)
definition of
performance module processing of
FLUSH routine
in COBOL (F)

24 GY28-6382

FMAINLFL, field in FLAGS
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

FMN, field in FLAGS
--in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

30 GY30-2029
36 GY28-6660
25 GY28-6601

FMSGO, field in COMMON
COMMAND PROCESSOR VOL6-SEND 36 GY28-6776

---rn TSO

FMSG1, field in FLAGS
TSO COMMAND PROC VOL5-0PERATOR

---rn

36 GY28-6775

FMSG7, field in COMMON
TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776

---rn

FNCALL- I EKVFN
in FORTRAN IV (H) COMPILER

25 GY28-6642

FNOMSG, field in FLAGS
---rn-TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

FNOUTLNG, field in COMMON
in TSO COMMAND PROCESSOR VOLI-ADD

36 GY28-6771

FNOUTPTR, field in COMMON
in TSO COMMAND PROCESSOR VOLl-ADD

36 GY28-6771

FNOW,
in
FNOW,
in

field in COMMON
TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
field in FLAGS
TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6775

FNPRO
in FORTRAN IV-TO-PL/l LCP

FNl'BL table
in COBOL (F)

29 GY33-7000
24 GY28-6382

Foldout charts
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
FOLLOW-IEKQF
---rn-FORTRAN IV (H) COMPILER

25 GY28-6642

FOPEN, field in COMMON
TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
FOPEN, field in FLAGS
in TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6775

---rn

For-list
--in ALGOL-TO-PL/l LCP
29 GY33-7006
For statement
in ALGOL (F) COMPILER
26 GY33-8000
identification in intermediate source
text
cla ssif ica tion
object code
FOR statement
in ALGOL-TO-PL/l LCP
29 GY33-7006
For statement closing entry
in ALGOL (F) COMPILER
26 GY33-8000
For statement beading entry
in ALGOL (F) COMPILER
26 GY33-8000

-=:
IIIJI

170

For - FORMAT

For Statement Table
in ALGOL (F) COMPILER

in ALGOL-TQ-PL/1 LCP

FORCE
in
in
Force
in
Force
in
Force
in
Force
in
FORCE
in
Force
in

ASSEMBLER (F)
21
COBOL (E)
24
and Except change item table
UPDATE ANALYSIS PROGRAM
36
and Except library name table
UPDATE ANALYSIS PROGRA~
36
and Except table
UPDATE ANALYSIS PROGRAM
36
and Except table build (FETBLBLD)
UPDATE ANALYSIS PROGRAM
36
card
UPDATE ANALYSIS PROGRAM
36
end-of-volume
INPUT/OUTPUT SUPPORT
30
end-of-volume processing
Force priority
in MVT JOB MANAGEMENT
36
FORCE Routine
in COBOL (E)
24

Forcing strength
in FORTRAN IV (G) COMPILER
definition
description
in Parse
table
in FORTRAN IV (H) COl".tPILER
definition of
table
Forcing value
in FORTRAN IV (E)
definition of
use of
Forcing value table
in FORTRAN IV (E)

GY26-3700
GY24-5009
GY28-7106
GY28-7106
GY28-7106
GY28-7106
GY28-7106
GY28-6609
GY28-6660
GY24-5009

25 GY28-6638

25 GY28-6642

25 GY28-6601

25 GY28-6601

Foreground
in TSO CONTROL PROGRAM
36
definition of
facilities unavailable to
Foreground-initiated background
in TSO COMMAND PROC VOL6-SUBMIT
36
facility
SVC
Foreground initiated background facility
in TSO COMMAND PROC VOL5-0UTPUT
36
Foreground job
in GRAPHIC JOB PROCESSOR SUPPORT
36
definition of
specification of a
Foreground job, definition of
in S/360 JOB PROCESSING 1130/2250 36
Foreground messages module (IKJEFF03)
in TSO COMMAND PROC VOL6-SUBMIT
36
Form of data
---rn PL/I SUBROUTINE LIBRARY

29 GY33-7006

26 GY33-8000

GY28-7199

GY28-6776

GY28-6775
GY27-7159

GY27-7166
GY28-6776

29 GY28-6801

Formal parameter
in ALGOL (F) COMPILER
26
internal name
storage field
object time treatment
in ALGOL-TO-PL/l LCP
29
Formal parameter list
in PL/I (F) COMPILER
29
Formal parameter specified by ARRAY
in ALGOL-TO-PL/1 LCP
29
Formal parameters, in CHECK or NOCHECK
lists
in PL/I (F) COMPILER
29
Formal procedure

GY33-8000

GY33-7006
GY28-6800
GY33-7006
GY28-6800

Format
---rn-FORTRAN IV (H) COMPILER
25
codes with READ/WRITE
of source statement after phase 10
text
phase 10
format
translation
in MFT SUPERVISOR
36
in PL/I SUBROUTINE LIBRARY
29
SSA
SSA flag byte
in TSO COMMAND PROC VOL6-RENAME
36
data areas
method of operation diagram
in 7074 EMULATE FOR M/165
V-format Data
7074-format Data
7074 data-word format
7074 instruction-format
Format, conversion
in TESTRAN
37
Format, data set
in INDEXED SEQUEN. ACCESS METHOD
30
Format, of data areas
in TSO COMMAND PROC VOL6-PROFILE
36
Format, printed ouput
in TESTRAN
37
Format, pseudo-register names
in PL/I SUBROUTINE LIBRARY
29
Format, subfields
in PL/I SUBROUTINE LIBRARY
29
Format, SYM record
in TESTRAN
37
Format, TIA entries
in TESTRAN
37
FORMAT (keyword statement)
in PL/I SYNTAX CHECKER PLM
29
checking of
format-list in
FORMFL
label prefix
subroutine FORMAT (IKM21)
FORMAT ALLOCATION routine
in FORTRAN IV (G) COMPILER
25
Format channel programs
30
in BASIC DIRECT ACCESS METhOD
Format codes
iL FORTRAN IV (E)
25
compile-time processing of
object-time processing of
in SORT/MERGE
33
ForJTlat data set
in TSO COMMAND PROCESSOR VOL3-EDIT 36
definition
use of
Format directors
in PL/I SUBROUTINE LIBRARY
29
I/O
library
arithmetic conversion
arithmetic-to-string
complex
complex-to-string
string-to-arithmetic
Format element descriptor (FED)
in PL/I SUBROUTINE LIBRARY
29
Format element descriptor (FED) usage
in PL/I SUBROUTINE LIBRARY
29
FORMAT-IEKTFM
in FORTRAN IV (H) COMPILER
25
FORMAT intermediate text
in FORTRAN IV (E)
25
format of

GY28-6642

GY27-7236
GY28-6801
GY28-6776
GY27-7228

GY28-6611
GY28-6618
GY28-6776
GY28-6611
GY28-6801
GY28-6801
GY28-6611
GY28- 6611
GY33- 8009

GY28- 6638
GY28-6617
GY28-6601
GY28-6597
GY28-6773

GY28-6801

GY28-6801
GY28-6801
GY28-6642
GY28-6601

171
FORMAT intermediate text
I in FORTRAN IV (E)
25 GY28-6601
L--------------------------------------(continued)
generation of
Format item
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
A/B/X
picture
Format item attributes
29 GY28-6801
in PL/I SUBROUTINE LIBRARY
Format list
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
in EDIT option for GET
in EDIT option for PUT
in FORMAT statement
Format-list arguments
29 GY33-8009
in PL/I SYNTAX CHECKER PLM
checking of
control format items
data format items
PUT FLAG
remote format item
subroutine FORMTST (IKM21)
Format modules
in BASIC DIRECT ACCESS METHOD
30 GY28-6617
Format of command
in TSO COMAND PROC VOL2-CNCL/STATUS36 GY28-6772
Format of control blocks
in TSO COMMAND PROC VOL6-PROTECT
36 GY28-6776
Format of PICA
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Format of statements
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
in function descriptions
Format only
in TSO TMP & SERVICE ROUTINES
36 GY28-6770
option of PUTLINE service routine
FORMAT reference number
in FORTRAN IV-TO- PL/ 1 LCP
29 GY33-7000
FORMAT roll
in FORTRAN IV (G) COMPILER
25 GY28-6638
FORMAT statement
in FORTRAN IV (E)
25 GY28-6601
compile-time processing of
object-time processing of
in FORTRAN IV (H) COMPILER
25 GY28-6642
in FORTRAN IV-TO-PL/ 1 LCP
29 GY33-7000
FORMAT statement, checked by syntax checker
in FORTRAN IV SYNTAX CHECKER PLM
25 GY28-6831
FORMAT statements
in FORTRAN IV (G) COMPILER
25 GY28-6638
description
in Allocate
listing of
position in object module
FORMAT subcommand
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
summary of operations
syntax
Format switch in SYSCTLG DSCB
in CATALOG MANAGEMENT
30 GY28-6606
in TSO CATALOG MANAGEMENT
36 GY28-6745
Format 0 DSCBs
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
Format 1 DSCBs
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
creation
by Allocate routine
by Extend routine
by ISAM allocation
by sub-allocation
retrieval
updating
by Release routine
by Rename routine

FORMAT - Formats

by sub-allocation
Format 2 DSCBs
in DIRECT ACCESS DEVICE SPACE MGT. 30
creation
DD statement option
description
updating
Format 3 DSCBs
in DIRECT ACCESS DEVICE SPACE MGT. 30
creation
by Allocate routine
by Extend routine
by lSAM allocation
deletion
description
Format 4 DSCBs
in DIRECT ACCESS DEVICE SPACE MGT. 30
description
hole (Format 0 block) count
updating
by Allocate routine
by Release routine
by Scratch routine
Format 5 DSCBs
in DIRECT ACCESS DEVICE SPACE MGT. 30
building extent table from
conversion, DOS to OS
description
reading
updating
normal allocation
Release routi ne
Scratch routine
Forma t 6 DSCBs
in DIRECT ACCESS DEVICE SPACE MGT. 30
creation
on DOS volumes
normal allocation
deletion
description
updating
Formats
in ASSEMBLER (F)
21
in PL/I SUBROUTINE LIBRARY
29
in TSO COMMAND PROC VOL5-LISTDS
36
Formats, block and table
in ONLINE TEST EXECUTIVE PROGRAM
37
Formats, data areas
in TSO COMMAND PROC VOL2-ALLOCATE 36
Formats, record
in LINKAGE EDITOR (F)
31
Formats for input record-IFCEREPO (165)
in UTILITIES
32
Formats for output record-IFCEREPO (165)
in UTILITIES
32
Formats messages
in TSO COMMAND PROC VOL2-ALLOCATE 36
Formats of
in GRAPHIC SUBRTN. PACKAGE
25
buffer control table
flow control table
GSP control blocks
key table
status table
in S/360-1130 DATA TMN. - FORTRAN 25
control blocks
data before and after
conversion
data transmission messages
save area used when
Systeffi/360 asynchronous
routine is in control
systeffi/360
telecommunications control
brock
unit assignment table

GY28-6607

GY28-6607

GY28-6607

GY28-6607

GY28-6607

GY26-3700
GY28-6801
GY28-6775
GY28-6651
GY28-6772
GY28-6667
GY28-6614
GY28-6614
GY28-6772
GY27-7152

GY27-7161

D

172

I'oXIEts - FPRs

Formats of
I in S/360-1130 DATA TMN. - FORTRAN 25 GY27-7161
L--------------------------------------(continued)
1130 telecOimnunications
control block
Formats of data areas
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
Formats of dictionary entries
in PL/I (F) COMPILER
29 GY28-6800
Formatted TCAM dwnp
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Formatting data from DADS
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771
Formatting of messages
in TSO TMP & SERVICE ROUTINES
36 GY28-6770
by PUTGET service routine
by PUTLINE service routine
by TERMOUT subroutine
Formatting output messages
in TCAM SERVICEABILITY AIDS
30 GY30-2027
Formatting procedure
in UTILITIES
32 GY28-6614
IPL records
volwne labels
VTOC record
Formatting routine
in CATALOG MANAGEMENT
30 GY28-6606
in TSO CATALOG MANAGEMENT
36 GY28-6745
Formatting Routine (IKJEFA42)
in TSO COMMAND PROCESSOR VOLl-LIST 36 GY28-6771
Formatting routines, flowchart
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
Formatting the error record
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237

syntax table for
FORTRAN error routine (IHCIBERH)
in FORTRAN IV (G) COMPILER
in FORTRAN IV (H) COMPILER
FORTRAN G and H
in FORTRAN IV SYNTAX CHECKER PLM
syntax table for
FORTRAN IV Syntax Checker
in FORTRAN IV SYNTAX CHECKER PLM
interface with CRJE
FORTRAN language levels
in FORTRAN IV SYNTAX CHECKER PLM
error messages for
syntax tables for
storage requirements
FORTRAN library
in GRAPHIC SUBRTN. PACKAGE
FORTRAN statements
in FORTRAN IV SYNTAX CHECKER PLM
as input to syntax checker
FORTRAN syntax checker
in CRJE PLM
FORTRAN system director
in FORTRAN IV (H) COMPILER

FORMIA routine
--rilCOBOL (F)

24 GY28-6382

FORMPDE, field in RUNPDL
in TSO COMMAND PROCESSOR VOL6-RUN

36 GY28-6776

Forms of data
---rn
GRAPHIC

SUBRTN. PACKAGE

25 GY27-7152

FORMTST
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

Forward
in FORTRAN IV (H) COMPILER
connection
table
target
FORWARD macro expansion linkage
in TELECOMMUNICATION ACCESS METHOD
Forward merge
in INPUT/OUTPUT SUPPORT
merging control block
information
FORWARD parameter list
in TELECOMMUNICATION ACCESS METHOD
Forward routine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
Forward space
in SEQUENTIAL ACCESS METHODS
CNTRL routine (IGG019BE)

30 GY30-2027

Found switch
---rn
TSO COMAND

FORMFL
--rilPL/I SYNTAX CHECKER PLM

Formula, asynchronous testing
in TCAM SERVICEABILITY AIDS
Formulas, branching
in PL/I SYNTAX CHECKER PLM
Formulas used in scaling
in GRAPHIC SUBRTN. PACKAGE
FORPRO
- - r i lALGOIr-To- PL/l LCP
FORT
---rn TSO COMMAND PROCESSOR VOL6-RUN
da ta set type PDE in RUNPDL
FORT parameter
in FORTRAN IV SYNTAX CHECKER PLM

29 GY33-8009

29 GY33-8009
25 GY27-7152
29 GY33-7006

25 GY28-6638
25 GY28-6642
25 GY28-6831
25 GY28-6831
25 GY28-6831

25 GY27-7152
25 GY28-6831
36 GY30- 2011
25 GY28-6642
25 GY28-6642

30 GY30-2029
30 GY28-6609

30 GY30-2029
30 GY30-2029'

30 GY28-6604

PROC VOL2-CNCL/STATUS36 GY28-6772
in operation
in switches
Found switch (SWFOUND)'
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
Foundation modules
in BASIC DIRECT ACCESS METHOD
30 GY28-6617
ASI component
nons panned records
spanned records

36 GY28-6776
25 GY28-6831

FORTRAN and PL/l conversational syntax
checke~ interface
in CRJE PLM
36 GY30-2011
flowchart
messages requested
microfiche directory
module description
register usage
FORTRAN E
in FORTRAN IV SYNTAX CHECKER PLM
25 GY28-6831

FPARS, field in COMMON
---rn
TSO COMMAND PROCESSOR VOL6-SEND

36 GY28-6776

FPI (Long Floating Point Intermediate)
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
FPN
in ALGOL-TO-PL/l LCP

29 GY33-7006

in ASSEMBLER (F)

21 GY26-3700

FPP
FPRs
in EMULATOR FOR 7090/7094/709411

35 GY27-7181

PO - Free

173

f2 record
in COBOL-TO-PL/l LCP
in MVT SUPERVISOR
FR record
in COBOL-TO-PL/l LCP
FR record, processing
in COBOL-TO-PL/l LCP
GRAPHIC JOB PROCESSOR SUPPORT
definition of
entering information on a
processing information on a
in S/360 JOB PROCESSING 1130/2250
parameter, preparation of
select, preparation of
Frame modules
in S/360 JOB PROCESSING 1130/2250
definition of
format of
Frame Routine (SGFRM),
description of
in S/360 JOB PROCESSING 1130/2250

29 GY33-7007
36 GY27-7159

36 GY27-7166

36 GY27-7166

36 GY27-7166

in COBOL (E)

24 GY24-5009

FRCOOO
in COBOL (E)

24 GY24-5009

FRC020
in COBOL (E)

24 GY24-5009

FRC030

(E)

24 GY24-5009

(E)

24 GY24-5009

(E)

24 GY24-5009

FRC040

---rn-COBOL
FRC050

---rn-COBOL
FRC070

---rn-COBOL

(E)

24 GY24-5009

(E)

24 GY24-5009

FRel30

---rn-COBOL

FRC16 0
in COBOL (E)

24 GY24-5009

FRC17 0
in COBOL (E)

24 GY24-5009

FRel87

---rn-COBOL

(E)

FRC210
in COBOL (E)

24 GY24-5009
24 GY24-5009

FRC230
in COBOL (E)

24 GY24-5009

FRC240
in COBOL (E)

24 GY24-5009

FRC250

---rn-COBOL

(E)

FRC260
"in COBOL (E)
'FRC270

FRC280
--rnCOBOL (E)

24 GY24-5009

FRC290
--rnCOBOL (E)

24 GY24-5009

29 GY33-7007

FRC

---rn-COBOL

24 GY24- 5009

36 GY28-6659

Frame

---rn

in COBOL (E)
29 GY33-7007

24 GY24-5009
24 GY24-5009

FREE (keyword statement)
in PL/I SYNTAX CHECRER PLM
checking of
identifiers
area-variable
based-variable
pointer qualifier
option IN
subroutine FREE (IKM22)
Free area queue element (FQE)
in INITIAL PROGRAM LOADER AND NIP
in MFT SUPERVISOR
format of
Free block queue element (FBQE)
in INITIAL PROGRAM LOADER AND NIP
in MVT SUPERVISOR
construction of
definition of
format of
Free blocks
in CATALOG MANAGEMENT
in TSO CATALOG MANAGEMENT
Free BRB routine
in QUEUED TELECOMM. ACCESS METHOD
charts
FREE command processing
in TSO COMMAND PROCESSOR VOL4-FREE
control routine (IKJEFD20)
functions of
overview
summary
Free-core chain
in PL/I SUBROUTINE LIBRARY
format
structure
Free elements (area storage)
in PL/I SUBROUTINE LIBRARY
Free/get region routine
in MVT JOB MANAGEMENT
FREE-IEKRFR
in FORTRAN IV (H) COMPILER
Free list (area storage)
in PL/I SUBROUTINE LIBRARY
FREE PDE
in TSO COMMAND PROCESSOR VOL6-RUN
Free queue--scan mode
in INDEXED SEQUEN. ACCESS METHOD
format
flow diagram references
use in processing
Free queue element (FQE)
in MVT SUPERVISOR
format of
Free space
in TSO COMMAND PROCESSOR VOL6-SEND
Free space queue chain processing
in TSO COMMAND PROC VOL1-SUBRTNS
in space allocation
in space deallocation
status
after space allocation
before space allocation
Free space queue element
in TSO COMMAND PROC VOL1-DELETE
Free space queue element (FSQE)
in TSO COMMAND PROC VOL1-SUBRTNS
building of
chaining of

29 GY33-8009

36 GY28-6661
36 GY27-7236
36 GY28-6661
36 GY28-6659

30 GY28-6606
36 GY28-6745
30 GY30-2002
36 GY28-6774

29 GY28-6801

29 GY28-6801
36 GY28- 6660
25 GY28-6642
29 GY28-6801
36 GY28-6776
30 GY28-6618

36 GY28-6659
36 GY28-6776
36 GY28-6771

36 GY28-6771
36 GY28-6771

iii

174

Free - FRS. GEN

Free space queue element CFSQE)
I in TSO COMMAND PROC VOL1-SUBRTNS

36 GY28-6771

L--------------------------------------(continued)

deletion of
description of
status of
after space allocation
before space allocation
FREE statement
in PL/I SUBROUTINE LIBRARY
Free track queue
in CONTROL PROGRAM WITH MFT

29 GY28-6801
36 GY27-7128

FR~EBUF

macro expansion
in SEQUE.NTIAL ACCESS METHODS

FREECORE
in LOADER

30 GY28-6604
31 GY28-6714

Fre~d

registers
1n PLiI (F) COMPILER
FREEDBUF macro instruction
in INDEXED SEQUEN. ACCESS METHOD
FREEDBUF macro instructions
in SEQUENTIAL ACCESS METHODS
FREED SA
1n PLiI (F) COMPILER

29 GY28-6800
30 GY28-6618
30 GY28-6604
29 GY28-6800

release HELP block
release PDL storage
FRBEMAIN macro instruction
in COBOL (F)
24
in FORTRAN IV (E)
25
compile-time use of
object-time use of
in MVT SUPERVISOR
36
types of SVC instructions for
in TSO COMMAND PROC VOL5-LISTDS
36
in TSO COMMAND PROCESSOR VOL6-RUN 36
in flowchart
FREEMAIN parameter list, pointer to
in TSO COMMAND PROC VOL5-0PERATOR 36
FRE.EMAIN routine
in MVT SUPERVISOR
36
description of
entry point name(s) of
flowchart of
module name for
synopsis of
FREEMAIN subcommand processor (IKJEGFRE)
in TSO COMMAND PROCESSOR VOL7-TEST 36
diagram of
flowchart of
module description of
text description of

GY28-6382
GY28-6601
GY28-6659
GY28-6775
GY28-6776
GY28-6775
GY28-6659

GY28-6777

FREEFLG, field in CFLAGS
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

FREEPART/GETPART routine
in TSO CONTROL PROGRAM

Freeing a data set
in TSO COMMAND PROC VOL5-LISTCAT
IKJDAIR parameter block for
Freeing areas of main storage
in TSO COMMAND PROCESSOR VOL7-TEST
in the program being tested
in the Test program
Freeing data sets
in TSO TMP i SERVICE ROUTINES
Freeing main storage
in TSO COMMAND PROC VOL2-ALLOCATE
Freeing PARSE work areas
in TSO COMMAND PROC VOL2-ALLOCATE

FREEPDL
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774

36 GY28-6775
36 GY28-6777

36 GY28-6770
36 GY28-6772

36 GY30-2005
30 GY28-6604
25 GY28-6601
36 GY30-2005

36 GY28-6772

Freeline routine
in LINKAGE EDITOR (F)

31 GY28-6667

Freelist, defined
in INPUT/OUTPUT SUPERVISOR
diagram of
used with NEXAVL

30 GY28-6616

FREEMAIN
in MFT SUPERVISOR
entry point
flowchart
functional description
module description
module synopsis
FREEMAIN, for OLT program space
in ONLINE TEST EXECUTIVE PROGRAM
in glossary
FREEMAIN (system macro)
in PL/I SYNTAX CHECKER PLM
release data area
release extra storage
usage
FREEMAIN action indicator
in TSO COMMAND PROC VOL1~DELETE
FREEMAIN list address
in TSO COMMAND PROC VOL5-LISTDS
FREEMAIN macro
in PL/I SUBROUTINE LIBRARY
in TSO COMMAND PROCESSOR VOL2-CALL
in TSO COMMAND PROCESSOR VOL4-HELP

Free pool
in REMOTE JOB ENTRY
FREE POOL macro expansion
in SEQUENTIAL ACCESS METHODS
FREE POOL macro-instruction
in FORTRAN IV (E)
object-time use of
Freepool manager
in REMOTE JOB ENTRY

36 GY28-7199

36 GY27-7236

FREES PACE
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
FREESPACE subroutine (IKJEFA54)
in TSO COMMAND PROC VOL1-SUBRTNS
36 GY28-6771
basic operations
building free space queue element
building free space queue element
header
flowchart
free space queue chaining
inputs
outputs
register activity
space deallocation request,
validating

37 GY28-6651

FREEUP, label
---rn-TSO COMMAND PROC VOL6-TERMINAL

36 GY28-6776

29 GY33-8009

FRENOW, field in DLCTLR
---rn-TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

FROM (keyword option)
in PL/I SYNTAX CHECKER PLM
in record I/O statements

29 GY33-8009

36 GY28-6775

FROM INTO
in COBOL-TO-PL/l LCP

29 GY33-7007

29 GY28-6801
36 GY28-6772
36 GY28-6774

FRS.GEN
in COBOL

24

36 GY28-6771

(F)

GY28-638~

175

FRSTFLG - FUnction

FRSTFLG, field in CFLAGS
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

FTCHLIT
in COBOL-TO-PL/l LCP

29 GY33-7007

FRSTUSER,
in TSO
FRSTUSER,
in TSO

---rn TSO

FTERM, field in FLAGS
COMMAND PROC VOL5-0PERATOR

36 GY28-6775

field in DIRWA
COMMAND PROC VOL1-DELE~E
36 GY28-6771
field in DIRYWA
COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

FSD
in FORTRAN IV (H) COMPILER
pointer table

25 GY28-6642

FSIGNT table

---rrlCOBOL

(F)

24 GY28-6382

FSIZE
in COBOL (E)

24 GY24-5009

FSMOD

---rn

GRAPHIC SUBRTN. PACKAGE

25 GY27-7152

FSOURCE, field in FLAGS
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6175

FSQE
in TSO COMMAND PROC VOL1-SUBRTNS
FSQE, offset ot
in TSO COMMAND PROC VOL1-DELETE
FSQE, offset to initial
in TSO COMMAND PROCESSOR VOL1-ADD
FSQE chaining
in TSO COMMAND PROC VOL1-SUBRTNS
FSQELNTH, field in UADSFSQE
in TSO COMMAND PROC VOL1-DELETE
FSQENEXT, field in UADSFSQE
in TSO COMMAND PROC VOL1-DELETE

36 GY28-6171
36 GY28-6771
36 GY28-6171
36 GY28-6771
36 GY28-6771
36 GY28-6171

FSQEPTR, field in BASE POINTERS
in TSO COMMAND PROCESSOR VOL1-ADD

36 GY28-6171

FSSEMAP
in MVT SUPERVISOR

36 GY28-6659

FST-ROUT routine
--in COBOL (F)

24 GY28-6382

FSTAE, field in FLAGS
TSO COMMAND PROC VOL5-0PERATOR

---rn

36 GY28-6175

FSTEXT routine
in COBOL (F)

24 GY28-6382

FTAB
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6174
cross references
element
table
updating
usage
FTABELMT length
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6174
FTABPTR field in ATABELMT
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6174
FTABPTRB field in ATABELMT
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6174
FTABxxx fields in
in TSO COMMAND
FTABxxx fields in
in TSO COMMAND

E01DATDF
PROCESSOR VOL4-EXEC 36 GY28-6774
FTAB
PROCESSOR VOL4-EXEC 36 GY28-6774

FTPRO

---rn FORTRAN

IV-TO-PL/l LCP

FUll buffer
---rn SEQUENTIAL ACCESS METHODS
Get routines
exchange buffering
simple buffering
Update mode
Put routines
Full delete
in TSO COMMAND PROC VOL1-DELETE
Full register assignment
in FORTRAN IV (H) COMPILER
control
global
local
OPT=l
OPT=2
table building
text updating
Full Track Index
in INDEXED SEQUEN. ACCESS METHOD
full track imex write
track INDEX save area
Full-word integer division skeleton
instructions
in FORTRAN IV (H) COMPILER
FULL WORD SCALAR roll
in FORTRAN IV (G) COMPILER
Fully qualified data set name
in TSO TMP & SERVICE ROUTINES
Fully qualified entries
in TSO COMMAND PROC VOL1-DELETE
FUlly-qualified name
in CATALOG MANAGEMENT
in TSO CATALOG MANAGEMENT
FUlly qualify dsname
in TSO COMMAND PROCESSOR VOL2-CALL
FUnction
in ALGOL-TO-PL/l LCP
in PL/I SYNTAX CHECKER PLM
checking (or description)
format
subroutine
FUnction arguments
in FORTRAN IV (H) COMPILER
Function byte, in SVC 100
in TSO COMMAND PROC VOL6-SUBMIT
Function call
in FORTRAN IV-To-PL/l LCP
Function calls
in FORTRAN IV (E)
compile-time processing of
in PL/I (F) COMPILER
FUnction codes,
in TSO COMMAND PROCESSOR VOL6-SEND
broadcast DS operations
FUnction codes, for IKJEFF6l
in TSO COMMAND PROC VOL5-0UTPUT
FUnction description
in TSO COMMAND PROCESSOR VOL4-HELP
Function designator
in ALGOL (F) COMPILER
Function of CHANGE command
in TSO_COMMAND PROCESSOR VOL1-CHNG
FUnction of CHANGE subcommand
in TSO COMMAND PROCESSOR VOL1-CHNG

29 GY33-7000
30 GY28-6604

36 GY28-6771
25 GY28- 6642

30 GY28-66l8

25 GY28-6642
25 GY28-6638
36 GY28-6170
36 GY28-617l
30 GY28- 6606
36 GY28-6745
36 GY28-6172
29 GY33-7006
29 GY33- 8009

25 GY28-6642
36 GY28-6776
29 GY33-7000
25 GY28-660l
29 GY28-6800
36 GY28-6776
36 GY28-6775
36 GY28-6774
26 GY33-8000
36 GY28-677l
36 GY28-677l

II[iI

176

Function - FUNTB1

Function of the COBOL-E Compiler
in COBOL (E)
Function references
in PL/I (F) COMPILER
FUNCTION statement
in FORTRAN IV (E)
compile-time processing of
in FORTRAN IV-TO-PLl1 LCP
FUNCTION subprogram
in FORTRAN IV (G) COMPILER
Function table
in FORTRAN IV (H) COMPILER
Function table (FTAB)
in TSO COMMAND PROCESSOR VOL4-EXEC
Functional and data logic flow
in IBM 1419/1275 DEVICE DEP. BSAM
Functional description subdivision
in PL/I SYNTAX CHECKER PLM
description of checking
errors detected
fields used in checking
format of statement
Functional descriptions
in TSO COMMAND PROCESSOR VOL4-EXEC
Functional flow. TOTE
in TCAM SERVICEABILITY AIDS
Functional GPR/FPR failure
in MACHINE-CHECK HANDLER, S360 M65
Functional groups of modules
in PL/I SUBROUTINE LIBRARY
FUnctional organization of program
in PL/I SYNTAX CHECKER PLM
Functional recovery
in MACHINE-CHECK HANDLER, M155/165
in MACHINE-CHECK HANDLER, S360 M65
definition
error/ action
possibilities of
in MACHINE-CHECK HANDLER, S360 M85
as a level of recovery
Functional relationships
in GRAPHICS ACCESS METHOD
basic attention handling
express attention handling
in GRAPHICS PROBLEM ORIENTED RTNS.
Functional routines (general)
in ASSEMBLER (F)
Functional stages
in TSO COMMAND PROC VOL5-0UTPUT
Functional summary
in TSO COMMAND PROC VOL6-SUBMIT
in TSO COMMAND PROCESSOR VOL6-SEND
Functionally equivalent devices
in INPUT/OUTPUT SUPERVISOR
Functions
in PLiI (F) COMPILER
in TSO COMMAND PROCESSOR VOL6-TIME
performed
Functions,. INTRO initialization
in TCAM SERVICEABILITY AIDS
Functions" of LISTBC
in TSO COMMAND PROC VOL4-LISTBC
described
illustrated
performed
provided
Functions" of LISTDS
in TSO COMMAND PROC VOL5-LISTDS
Functions "(GSP status information)
in GRAPHIC SUBRTN. PACKAGE
Functions of CALL CP
in TSO COMMAND PROCESSOR VOL2-CALL
Functions of CPB cleanup
in TELECOMMUNICATION ACCESS METHOD
Functions of CPB initialization
in TELECOMMUNICATION ACCESS METHOD

24 GY24-5009
29 GY28-6800
25 GY28-6601
29 GY33-7000
25 GY28-6638
25 GY28-6642
36 GY28-6774
30 GY21-0012
29 GY33-8009

36 GY28-6774
30 GY30-2027
31 GY27-7155
29 GY28-6801
29 GY33-8009
30 GY27-7198
31 GY27-7155

31 GY27-7184
30 GY27-7113
30 GY27-7110
21 GY26-3700
36 GY28-6775
36 GY28-6776
36 GY28-6776
30 GY28-6616
29 GY28-6800
36 GY28-6776
30 GY30-2027
36 GY28-6774

36 GY28-6775

Functions of DELETE command
in TSO COMMAND PROC VOL2-DELETE
36
Functions of EXEC
in TSO COMMAND PROCESSOR VOL4-EXEC 36
Functions of IEHATLAS
in UTILITIES
32
Functions of initiator
in MVT JOB MANAGEMENT
36
Functions of INTRO
in TELECOMMUNICATION ACCESS METHOD 30
Functions of OLTEP
in ONLINE TEST EXECUTIVE PROGRAM
37
in detail
overview
RETAIN/370
Functions of program segments-IEBGENER
in UTILITIES
32
Functions of PROTECT command processor
in TSO COMMAND PROC VOL6-PROTECT
36
Functions of READY
in TELECOMMUNICATION ACCESS METHOD 30
Functions of routines-chart
in CATALOG MANAGEMENT
30
in TSO CATALOG MANAGEMENT
36
Functions of syntax checker
in PL/I SYNTAX CHECKER PLM
29
description:
fields
main
operation diagram
service functions for
checking expressions
checking variables
skipping parentheses
testing constants
Functions of the ADD subcommand
in TSO COMMAND PROCESSOR VOL1-ADD 36
Functions of the checkpoint executor
in TELECOMMUNICATION ACCESS METHOD 30
Functions of the disk end appendage
in TELECOMMUNICATION ACCESS METHOD 30
Functions of the EXCP driver routine
in TELECOMMUNICATION ACCESS METHOD 30
Functions of the linkage editor
in LINKAGE EDITOR (F)
31
Functions of the LISTCAT command
in TSO COMMAND PROC VOL5-LISTCAT
36
Functions of the Loader
in LOADER
31
Functions of the network control
facilities
in TELECOMMUNICATION ACCESS METHOD 30
Functions of the Open routines
in TELECOMMUNICATION ACCESS METHOD 30
Functions of the RUN command
in TSO COMMAND PROCESSOR VOL6-RUN 36
Functions of the TERMINAL command
processor
in TSO COMMAND PROC VOL6-TERMINAL 36
Functions of the Test program
in TSO COMMAND PROCESSOR VOL7-TEST 36
exceptional functions
general functions
internal functions
subcommand functions
Functions used by
in S/360-1130 DATA TMN. - FORTRAN 25
System/360 PTOP program
1130 PTOP program

GY28-6772
GY28-6774
GY28-6614
GY28-6660
GY30-2029
GY28-6651

GY28-6614
GY28-6776
GY30-2029
GY28-6606
GY28-6745
GY33-8009

GY28-6771
GY30-2029
GY30-2029
GY30-2029
GY28-6667
GY28-6775
GY28-6714
GY30-2029
GY30-2029
GY28-6776
GY28-6776
GY28-6777

GY27-7161

25 GY27-7152
36 GY28-6772

FUNRDY-IEKJFU
---rn-FORTRAN IV (H) COMPILER

25 GY28-6642

30 GY30-2029
FUNTB1

30 GY30-2029

~FORTRAN IV (H) COMPILER

25 GY28-6642

177

FUNTB2 -

FUNTB2

- i nFORTRAN

in GRAPHICS ACCESS METHOD
IV

(H)

COMPILER

GEN

30 GY27-71l3

25 GY28-6642
GAM

E'UNTB3
in FORTRAN IV

COMPILER

25 GY28-6642

FUNTB4
--rDFORTRAN IV (H) COMPILER

25 GY28-6642

FUOFLG7. field in DPLB
in TSO COMMAND PROC VOL1-DELETE

36 GY28-677l

(tl)

FUPUSD. field in FLAGS
--rDTSO COMMAND PROC VOL5-0PERATOR
FUSER. field in FLAGS
TSO COMMAND PROC VOL5-0PERATOR

--in GRAPHIC SUBRTN. PACKAGE
in GRAPHICS ACCESS M~'THOD

25 GY27-7l52
30 GY27-71l3

GAR
--in GRAPHICS ACCESS METHOD
GAR interrupt queue element
in GRAPHICS ACCESS METHOD

30 GY27-7113
30 GY27-7113

GARC--circular arc generation routine
---rn GRAPHICS PROBLEM ORIENTED RTNS. 30 GY27-7110
36 GY28-6775

---rn

36 GY28-6775

FWDPAS-IEKRFP
--rDFORTRAN IV (H) COMPILER

25 GY28-6642

GBFORGFW
in CRJE PLM

36 GY30-2011

GBQCTLFW
in CRJE PLM

36 GY30-2011

GCB
E'WDPS1-IEKRFl
--rDFORTRAN IV (H) COMPILER

in GRAPHICS ACCESS METHOD

FWT02. field in FLAGS
TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6775
FWT02. in Common
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776

---rn

E'X AC roll
in FORTRAN IV (G) COMPILER
FX CONST roll
in FORTRAN IV (G) COMPILER

30 GY27-7113

25 GY28-6642

25 GY28-6638

GCGRID--rectangular Cartesian grid
generation routine
in GRAPHICS PROBLEM ORIENTED RTNS. 30 GY27-7110
GCL
--in COBOL (E)

24 GY24-5009

GCNTRL macro instruction
--rDGRAPHICS ACCESS METHOD

30 GY27-71l3

25 GY28-6638

FYESBCM. field in FLAGS
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

GCPRNT--alphameric character display
routine
in GRAPHICS PROBLEM ORIENTED RTNS. 30 GY27-7110

FO format
in COBOL (F)

24 GY28-6382

GDEF
--rn COBOL (E)

F0010
in COBOL (E)

24 GY24-5009

F0020
in COBOL (E)

24 GY24-5009

Fl format
in COBOL (F)

24 GY28-6382

F2-Text
in COBOL (F)

24 GY28-6382

F2EOF routine
COBOL (F)

24 GY28-6382

--rn

GDG (generation data group)
in CATALOG MANAGEMENT
30 GY28-6606
in JOB MANAGEMENT
36 GY28-66l3
all processing routine
single processing routine
bias count table. description of
in TSO CATALOG MANAGEMENT
36 GY28-6745
GOOA
--rn GRAPHIC SUBRTN. PACKAGE
25 ~Y27-7152
in GRAPHICS ACCESS METHOD
30 GY27-7113
GDOA--graphic data output area
in GRAPHICS PROBLEM ORIENTED RTNS. 30 GY27-7110
GDS
--in GRAPHIC SUBRTN. PACKAGE

in COBOL (E)

24 GY24-5009

25 GY27-7l52

24 GY24-5009
GDSCB

F4FIN routine
in COBOL (F)

24 GY28-6382

--rn GRAPHIC

SUBRTN. PACKAGE

25 GY27-7l52

in PL/I SYNTAX CHECKER PLM

29 GY33-8009

F50l0

--rn COBOL

(E)

in SORT/MERGE
G (ENVIRONMENT option)
in PL/I SYNTAX CHECKER PLM
G-format code
in FORTRAN IV-TO-PL/l LCP
GACB
'--rn GRAPHIC SUBRTN. PACKAGE

24 GY24-5009

33 GY28-6597
29 GY33-8009
29 GY33-7000
25 GY27-7l52

Gen label list
---in FORTRAN IV (G) COMPILER
Gen phase (IEYGEN)
in FORTRAN IV (G) COMPILER
definition
detailed description
general description
location in storage
rolls used by
GEN PROCESS routine
in FORTRAN IV (G) COMPILER

25 GY28-6638
25 GY28-6638

25 GY28-6638

Ii

In

GENAME -

178

GEN:ID

GENAME
-rI!COBOL-To-PL/l LCP
GENDATA
in COBOL-To-PL/l LCP
GENDCLF
in COBOL-To-PL/l LCP
GENELEM
in COBOL-To-PL/1 LCP
GENENTR
in COBOL-TO-PL/l LCP

29 GY33-7007

LCP
in COBOL-TO-PL/l LCP
GENER-IEKLGN
in FORTRAN IV (E) COMPILER

GENERAL ALLOCATION roll
in FORTRAN IV (G) COMPILER
General considerations
in COBOL-TO-PL/l LCP
General design, string package
in PL/I SUBROUTINE LIBRARY
General implementation features
in PL/I SUBROUTINE LIBRARY
General information
in TSO COMMAND PROCESSOR VOLI-ADD
in TSO COMMAND PROCESSOR VOL4-EXEC
General offset block
in TSO COMMAND PROCESSOR VOLI-ADD
General offset block format
in TSO COMMAND PROC VOL1-DELETE
General parameter list
in TSO COMMAND PROC VOL6-WHEN/END
General-Purpose registers (GPRs)
in EMULATOR FOR 7090/7094/709411
contents
in SAVEAREA
General register assignments
in ASSEMBLER (F)
ACT pointer
FRB

29 GY33-7007
29 GY33-7007
29 GY33-7007
29 GY33-7006
29 GY33-7007
25 GY28-6642
25 GY28-6638
29 GY33-7007
29 GY28-6801
29 GY28-6801
36 GY28-6771
36 GY28-6774
36 GY28-6771
36 GY28-6771
36 GY28-6776
35 GY27-7187

21 GY26-3700

SRB
SRR

SP1,SP2
GRX,GRY,GRZ
GRA,GRB,GRC,GRD
General register contents
in LOADER
General register usage
in FORTRAN IV (G) COMPILER
used by compiler
used by object module
General registers, contents
of
in LINKAGE EDITOR (F)
General search routine
in REMOTE JOB ENTRY
General workarea
in TSO COMMAND PROCESSOR VOL6-RUN
address of
description
Generate job card routine CIKJEFF08)
in TSO COMMAND PROC VOL6-SUBMIT
GENERATE macro, use of
in FORTRAN IV SYNTAX CHECKER PLM
Generated job statements
in TSO COMMAND PROC VOL6-SUBMIT
Generated Procedure Name Definitions
in COBO~ (F)
Procedure A-Text format

24 GY28- 6382

29 GY33-7007

GENER

--rn ALGOL-TO- PL/1

Procedure IC-Text format
Generated Procedure Name References
in COBOL (F)
Procedure A-Text format

31 GY28-6714
25 GY28-6638

31 GY28-6667
36 GY30-2005
36 GY28-6776

36 GY28-6776
25 GY28-6831

Generating
in 7074
Generating
in 7074

the emulator program
EMULATE FOR M/165
7074 interrupts
EMULATE FOR M/165

Generation
in GRAPHIC JOB PROCESSOR SUPPORT
of a frame
of a message
in TELECOMMUNICATION ACCESS METHOD
Generation, system
in PL/I SUBROUTINE LIBRARY
Generation data group (GDG)
in MVT JOB MANAGEMENT
Generation index
in CATALOG MANAGEMENT
building
deleting
inserting entries into
locating entries in
locating entries in
pointer entry
order of entries in
in TSO CATALOG MANAGEMENT
building
deleting
inserting entries into
locating entries in
pointer entry
order of entries in
Generation numbers
in CATALOG MANAGEMENT
absolute
relative
in TSO CATALOG MANAGEMENT
absolute
relative
Generation of emulator program
in EMULATOR FOR 7090/7094/709411
Generation of output records-IEBDG
in UTILITIES
Generation stages (library)
in PL/I SUBROUTINE LIBRARY
Generations, system (SYSGEN)
in TESTRAN
Generators (Phases PGI-PG9)
in COBOL (E)
GENERIC (keyword attribute)
in PL/I SYNTAX CHECKER PLM
attribute list
checking of
ENTRYFL (ENTRY attribute found)
GENFLAG
not in ENTRY attribute list
subroutine GENERIC (IKM23)
with ENTRY attribute
Generic built-in functions
in PL/I (F) COMPILER
GENERIC. entry label
in PL/I (F) COMPILER
Generic phase
in PL/I (F) COMPILER
GENFLAG
in PL/I SYNTAX CHECKER PLM

GY27-7228
GY27-7228
36 GY27-7159
30 GY30-2029
29 GY28-6801
36 GY28-6660
30 GY28-6606

36 GY28-6745

30 GY28-6606
36 GY28-6745

35 GY27-7187
32 GY28-6614
29 GY28-6801
37 GY28-6611
24 GY24-5009
29 GY33-8009

29 GY28-6800
29 GY28-6800
29 GY28-6800
29 GY33-8009

36 GY28-6776
24 GY28-6382

GENID

--rn ALGOL-TQ-PL/1

LCP

29 GY33-7006

179
GENINT subroutine of IKADMSG
---rn-GRAPHIC JOB PROCESSOR SUPPORT

36 GY27-7159

GENKEY (ENVIRONMENT option)
in PLiI SYNTAX CHECKER PLM

29 GY33-8009

GENL, in history
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

Gl!:NMES
---rn-COBOL-TO-PL/1 LCP

29 GY33-7007

GENMSG subroutine of IKADMSG
in GRAPHIC JOB PROCESSOR SUPPORT

36 GY27-7159

GENOP routine
in COBOL (F)

24 GY28-6382

GENORNO
in COBOL-TO-PL/1 LCP

29 GY33-7007

GENPRO
in COBOL-TO-PL/1 LCP

29 GY33-7007

GENPST subroutine of IKADGM
in GRAPHIC JOB PROCESSOR SUPPORT

36 GY27-7159

GENR
in ALGOL-TO- PLl1 LCP

29 GY33-7006

GENRTN-IEKJGR
in FORTRAN IV (H) COMPILER

25 GY28-6642

GENSEQ routine
in COBOL (F)

24 GY28-6382

GENSIM
---rn-COBOL-To-PL/1 LCP

29 GY33-7007

GENTXT1
in COBOL-To-PL/1 LCP

29 GY33-7007

GENTYPE parameter, for system ge,leration
in FORTRAN IV SYNTAX CHECKER PLM
25 GY28-6831
Gl!:NI·\O
in ALGOL-TO-PL/1 LCP
in FORTRAN IV-TQ-PLl1 LCP
in SORT/MERGE
GET (keyword statement)
in PL/I SYNTAX CHECKER PLM
checking of
options
subroutine GETPUT (IKM21)
GET appendage routine--scan mode
in INDEXED SEQUEN. ACCESS METHOD
description
module
pointers to
Get-character routines
in FORTRAN IV SYNTAX CHECKER PLM
definition of
effect on source pointer
effect on syntax table
function of
Get compatible routine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
GET macro expansion linkage

29 GY33-7006
29 GY33-7000
33 GY28-6597
29 GY33-8009

30 GY28-6618

25 GY28-6831

30 GY30-2029

GENIN'.r - Get

in TELECOMMUNICATION ACCESS METHOD
GET macro instruction
in INDEXED SEQUEN. ACCESS METHOD
in JOB MANAGEMENT
GET macro instruction, processing
for
in TSO CONTROL PROGRAM
Get message routine
in QUEUED TELECOMM. ACCESS METHOD
chart
Get parameter routine
in JOB MANAGEMENT
GET POLISH routine
in FORTRAN IV (G) COMPILER
GET/PUT and READ/wRITE close
executor
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
GET/PUT and READ/WRITE open executor
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
GET/PUT code structure
in PL/I SUBROUTINE LIBRARY
GET/PUTX macro instructions
in TSO CONTROL PROGRAM
processing for
GET/READ routine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
Get record routine
in QUEUED TELECOMM. ACCESS METHOD
chart
Get request element routine
in INPUT/OUTPUT SUPERVISOR
flowchart of
error condition checking
I/O data manipulation
in module directory
GET routine
in COBOL (F)
GET routine--scan mode
in INDEXED SEQUEN. ACCESS METHOD
description
flowchart
module
pointers to
Get routines
in SEQUENTIAL ACCESS METHODS
buffering techniques
card reader
exchange buffer ing
introduction to
paper tape character conversion
Readback
simple buffering
Update mode
Get scheduler
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library

30 GY30-2029
30 GY28-6618
36 GY28-6613
36 GY28-7199
30 GY30-2002
36 GY28-6613
25 GY28-6638
30 GY30-2029

IIr.L
~

30 GY30-2029

29 GY28-6801
36 GY28-7199
30 GY30-2029

30 GY30-2002
30 GY28- 6616

24 GY28-6382
30 GY28-6618

30 GY28-6604

30 GY30-2029

180

Get - GBTLDIE

Get scheduler
I in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
L--------------------------------------(continued)
microfiche directory
module description
register usage
Get scheduler FIFO routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
Get scheduler routine
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
chart
Get segment routine
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
chart
GET statements, library call
in PLII (F) COMPILER
29 GY28-6800
Get SVC subtask
in QUEUED TELECO~~. ACCESS METHOD 30 GY30-2002
Get SVC1 queue
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
Get Word Routine
in COBOL (E)
24 GY24-5009
Get Word Routine, Data Definition
in COBOL (E)
24 GY24-5009
GETADR
-rilCOBOL (E)

24 GY24-5009

GETBUF macro
-rilPLlI SUBROUTINE LIBRARY
GETBUF macro expansion
in SEQUENrIAL ACCESS METHODS

29 GY28-6801
30 GY28-6604

GETCAR
-rIlALGOL-To-PL/1 LCP

29 GY33-1006

GETCD-IEKCGC
---rn
FORTRAN IV

25 GY28-6642

(H) COMPILER

GETCNFIG
in ONLINE TEST EXECUTIVE PROGRAM
GETCONFG Service module
in TCAM SERVICEABILITY AIDS
entry
functions
GETCORE
in LOADER

31 GY28-6651
30 GY30-2021

31 GY28-6114

GETCRD

---rnFORTRAN

IV-TO- PLl1 LCP
GETCRD routine
in COBOL (F)

29 GY33-1000
24 GY28-6382

GETDIC-IEKPGC
in FORTRAN IV (H) COMPILER

25 GY28-6642

GETDIK-IEKPGK
in FORTRAN IV (H) COMPILER

25 GY28-6642

GETDLM routine
in COBOL (F)

24 GY28-6382

GETENTRY, field in EXITPARM
in TSO COMMAND PROC VOL5-0PER~OR

36 GY28-6115

GETERR
in ASSEMBLER (F)

21 GY26-3100

GETFNUM
in CRJE PLM

36 GY30-2011

--rn COBOL

GETF4 routine
(F)

24 GY28-6382

GETGBASE
in CRJE PLM

36 GY30-2011

GETIDMUL
in LINKAGE EDITOR (F)

31 GY28-6661

GETLAT - Phase F8 get literal adjustment
table
in ASSEMBLER (F)
21 GY26-3100
GETLBT - Phase FI get literal base table
in ASSEMBLER (F)
21 GY26-3100
GETLlNE
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6113
definition
function
GE~LlNE (IKJGETL) -- service routine and
macr 0 i nstructi on
in TSO COMMAND PROCESSOR VOL1-TEST 36 GY28-6111
description of routine
description of macro instruction
handling a GETLINE request from a Test
module
diagram of
flowchart of
module description of
text description of
GETLINE/GETPUT
in TSO COMMAND PROC VOL6-WHEN/END 36 GY28-6116
GETLlNE macro instruction
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6116
issued by the TMP
GETLINE Parameter Block (GTPB)
in TSO TMP & SERVICE ROUTINES
36 GY28-6110
format
use
GETLINE routine (IKJGETL)
36 GY28- 6115
in TSO COMMAND PROC VOL5-LISTCAT
definition of
GETLINE service routine
in TSO COMMAND PROC VOL1-BROADCAST 36 GY28-6111
definition
in TSO COMMAND PROC VOL1-SUBRTNS
36 GY28-6111
definition
36 GY28-6112
in TSO COMMAND PROC VOL2-DELETE
definition
36 GY28-6114
in TSO COMMAND PROC VOL4-LISTALC
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6115
definition
36 GY28-6116
in TSO COMMAND PROC VOL6-PROFILE
36 GY28-6116
in TSO COMMAND PROC VOL6-PROTECT
definition
in TSO COMMAND PROC VOL6-T~RMINAL 36 GY28-6116
definition
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6111
definition
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6111
in TSO COMMAND PROCESSOR VOLl-LIST 36 GY28-6111
definition
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6112
definition
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6114
description
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6114
definition
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6116
definition
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6116
definition

181
GETLINE service routine
L--------------------------------------(continued)
in TSO CO~1MAND PROCESSOR VOL6-TIME 36 GY28-6776
in TSO TMP & SERVICE ROUTINES
36 GY28-6770
description
hierarchy
operation
parameters
register usage
return codes
GETLINE service routine definition
Intro/l0
in TSO COMMAND PROC VOL6-RENAME
36 GY28-6776
GETLPTR, field in
in TSO COMMAND
GETLPTR, field in
in TSO COMMAND

EXITPARM
PROC VOL5-oPERATOR
WORKAREA
PROC VOL5-0PERATOR

GE'l'LRTN. entry point
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775
36 GY28-6775
36 GY28-6775

GE'l'MAIN
in INTRO. TO CONTROL PROGRAM LOGIC 36 GY28-6605
macro instructions
routine
in MFT SUPERVISOR
36 GY27-7236
entry point
flowchart
functional description
module description
module synopsis
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
for OLT program segment
for subpool 254
in glossary
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY28-6772
for work area
macro
GETMAIN (field in test communication table)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description of
GETMAIN (system macro)
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
create data area
create extra storage
list in communication area
pointer for DATAAREA DSECT
storage unavailable, return code=16
system start up time
usage
GETMAIN areas
in TCAM SERVICEABILITY AIDS
30 GY30-2027
GETMAIN DSECT pointer
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
GETMAIN failure
in CRJE PLM
36 GY30-2011
GETMAIN for data list indicator
in TSO COMMAND PROC VOLI-DELETE
36 GY28-6771
GETMAIN list address
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
GETMAIN macro
in PL/ I SUBROUTINE LIBRARY
29 GY28-6801
in TSO COMAND PROC VOL2-CNCL/STATUs36 GY28-6772
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
flowchart reference
how used
issued by
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
GETMAIN macro instruction
in CATALOG MANAGEMENT
30 GY28-6606
in COBOL (F)
24 GY28-6382
in FORTRAN IV (E)
25 GY28-6601
. compile-time use of
object-time use of
in MVT SUPERVISOR
36 GY28-6659

GETLINE - GETSRC

list structure of
types of SVC instructions for
in TSO CATALOG MANAGEMENT
36
in TSO COMMAND PROC VOL5-LISTDS
36
in TSO COMMAND PROC VOL6-PROTECT
36
in TSO COMMAND PROCESSOR VOL6-TIME 36
GETMAIN routine
in MVT SUPERVISOR
36
description of
entry point name{s) of
flowchart of
module name for
synopsis of
GETMAIN siz e
in TSO COMMAND PROC VOL6-WrlEN/END 36
hierarchy
I/O parameter block
Gh~MAIN subcommand processor (IKJEGGET)
in TSO COMMAND PROCESSOR VOL7-TEST 36
diagram of
flowchart of
module description of
text description of
GETMAIN tables. addresses
in SORT/MERGE
33

GY 28- 6745
GY28-6775
GY28-6776
GY28-6776
GY28-6659

GY28-6776

GY28-6777

GY28-6597

GETMEMBR. processing at
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
GETPART macro instruction
in MVT JOB MANAGEMENT
in TSO CONTROL PROGRAM
for TSC region
for TSO user region
GETPART work table
in MVT JOB MANAGEMENT

36 GY28-6660
36 GY28-7199

36 GY28- 6660

GETPOOL macro
in PL/I SUBROUTINE LIBRARY
Getpool routine (IECQBFG1)
in SEQUENTIAL ACCESS METHODS

30 GY28- 6604

GETPRC
-rrlCOBOL (E)

24 GY24-5009

29 GY28-6801

GETPT - Phase F7 get point subroutine
in ASSEMBLER (F)
21 GY26-3700
GETPTR routine
-rrlCOBOL (F)

24 GY2~-6382

GET PUT
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

GETREC
-rrlCOBOL (E)

24 GY24-5009

GETREK
-rrlCOBOL-TO-PL/l LCP

29 GY33-7007

GETS PACE subroutine (IKJEFA53)
in TSO COMMAND PROC VOL1-SUBRTNS
36 GY28-6771
adjusting free space queue chain
basic operation
callers of
data areas used
eleting free space queue elements
flowchart
inputs
obtaining space for account user
entries
register activity
return codes from
GETSRC
- r r lASSEMBLER

(F)

21 GY26-3700

182

GETSTM'l' - Global

GETSTMT
in COBOL-TO-PL/1 LCP
GETTBL
in FORTRAN IV-TO-PL/1 LCP

in FORTRAN IV
G.l!:TWD routine
in COBOL (F)

(li)

COMPILER

GETWORD
in ALGOL-TO-PL/1 LCP

29 GY33-7007
25 GY28-6642
24 GY28-6382

in FORTRAN IV-TO-PL/1 LCP

24 GY24-5009
29 GY33-7000

GETXTM - Get text and more subroutine
-rilASSEMBLER (F)
21 GY26-3700
Phase F7
Phase F8
GFDENT
-rilCOBOL (E)
GFX
---in GRAPHIC JOB PROCESSOR SUPPORT
in S/360 JOB PROCESSING 1130/2250
GFX catalogued procedure
in GRAPHIC JOB PROCESSOR SUPPORT
adding to procedure library
description of
in S/360 JOB PROCESSING 1130/2250
adding to procedure library
description of
GFX Initialization Routine (IKASD080)
in GRAPHIC JOB PROCESSOR SUPPORT
chart
description of
example of use in GFX functions
in S/360 JOB PROCESSING 1130/2250
chart
description of
GFX Parameter List
in GRAPHIC JOB PROCESSOR SUPPORT
building the
format of
use of
GFX Parameter List. format of
in 6/360 JOB PROCESSING 1130/2250

24 GY24-5009
36 GY27-7159
36 GY27-7166
36 GY27-7159
36 GY27-7166

36 GY27-7159

36 GY27-7166

36 GY27-7159

36 GY27-7166

Gfxoption parameters
in 6/360 JOB PROCESSING 1130/2250

36 GY27-7166

GHISORD subroutine of IKADGM
in GRAPHIC JOB PROCESSOR SUPPORT

36 GY27-7159

GINIT1 routine
in COBOL (F)

24 GY28-6382

GINIT2 routine
in COBOL (F)

24 GY28-6382

GINIT3 routine
in COBOL (F)

24 GY28-6382

GINTORD subroutine of IKADMSG
in GRAPHIC JOB PROCESSOR SUPPORT

36 GY27-7159

GIOCR

---rn

GRAPHICS ACCESS METHOD

GITWUD
-rilCOBOL (E)

24 GY24-5009

GJOBCTL macro instruction
in GRAPHIC JOB PROCESSOR SUPPORT
data flow from
description of
parameters on
in S/360 JOB PROCESSING 1130/2250
data flow from
description of
parameters in

36 GY27-7159

36 GY27-7166

29 GY33-7006

GETWRD

~COBOL (E)

24 GY24- 5009

29 GY33-7000

GETWD

---rn
COBOL-TO-PL/1 LCP
GETWD-IEKCGW

in COBOL (E)
29 GY33-7007

30 GY27-7113

GLABEL
2g GY33-7006
in ALGOL-TO-PL/1 LCP
GLABEL--grid label routine
in GRAPHICS PROBLEM ORIENTED RTNS. 30 GY27-7110
GLIT
---rn COBOL (E)

24 GYL4-5009

GLITA
in COBOL (E)

24 GY24- 5009

GLIT4
in COBOL (E)

24 GY24-5009

GLIT8

-----rn COBOL

(E)

24 GY24-5009

Global area
-rilFORTRAN IV (G) COMPILER
25 GY28-6638
Global assignment
in FORTRAN IV (H) COMPILER
25 GY28-6642
full register assignment OPT=2
tables
Global dictionary and main text local
dictionary subsetting
21 GY 26- 3700
in ASSEMBLER (F)
Global dictionary entry formats (Phase F2)
21 GY26-3700
in ASSEMBLER (F)
defined operation codes
macro name entry
SET variable symbol entry
GLOBAL DMY roll
in FORl'RAN IV (G) COMPILER
25 GY28-6638
Global files
36 GY30-2011
in CRJE PLM
Global jump table
in FORl'RAN IV (G) COMPILER
25 GY28-6638
Global jumps
25 GY28-6638
in FORTRAN IV (G) COMPILER
Global label
25 GY28-6638
in FORTRAN IV (G) COMPILER
GLOBAL region boundary
in PL/I (F) COMPILER
29 GY28-6800
GLOBAL SPROG ALLOCATE routine
25 GY28-6638
in FORl'RAN IV (G) COMPILER
GLOBAL SPROG roll
in FORTRAN IV (G) COMPILER
25 GY28-6638
description
general
in Allocate
in Exit
Global Table Other Area References
24 GY28-6382
in COBOL (F)
Procedure A-Text format
Global Table Reference, Type 1
24 GY28-6382
in COBOL (F)
Procedure IC-Text format
Global Table Reference, Type 2
in COBOL (F)
24 GY28-6382
Procedure IC-Text format

183
Global Table standard Area Reference
Elements
in COBOL (F)
Global Table standard Area Reference
Elements
in COBOL (F)
Procedure A-Text format
Global Table text
in COBOL (F)
Global tables
in COBOL (F)

24 GY28-6382
24 GY28-6382
24 GY28-6382
24 GY28-6382

GLOBAS-IEKRGB
in FORTRAN IV (H) COMPILER

25 GY28-6642

GLOSRY routine
in COBOL (F)

24 GY2 8- 63 82

Glossary
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
GLPR
in COBOL (E)
GMACRO
-rriCOBOL (E)

24 GY24-5009
24 GY24-5009

Global -

flowchart of
module description of
text description of
GO TO
in PL/I SYNTAX CHECKER PLM
GO-TO Routine
in COBOL (E)
GO TO STA GEN routine
in FORTRAN IV (G) COMPILER
GO TO statement
in ALGOL-TO-PL/l LCP
in FORTRAN IV (E)
compile-time processing of
in FORTRAN IV (H) COMPILER
computed
in gathering forward connection
information
in FORTRAN IV-TO-PL/l LCP
GO TO statement, processing
in COBOL-TO-PL/l LCP
GO TO statements
in PL/I SUBROUTINE LIBRARY
GO TO statements, processing of
in FORTRAN IV (G) COMPILER
GO TO statements (multitasking)
in PL/I SUBROUTINE LIBRARY

GOTOKK

29 GY33-8009
24 GY24-5009
25 GY28-6638
29 GY33-7006
25 GY28-6601
25 GY28-6642

29 GY33-7000
29 GY33-7007
29 GY28- 6 801
25 GY28-6638
29 GY28-6801

GMNMAX field in EOIDATDF
---rn-TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774

GOBLANK subroutine of IKADGM
in GRAPHIC JOB PROCESSOR SUPPORT

36 GY27-7159

GMNMIN field in EOIDATDF
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774

GOBOX subroutine of IKADGM
in GRAPHIC JOB PROCESSOR SUPPORT

36 GY27-7159

GMSGORD subroutine of IKADMSG
in GRAPHIC JOB PROCESSOR SUPPORT

36 GY27-7159

GODASHA subroutine of IKADGM
in GRAPHIC JOB PROCESSOR SUPPORT

36 GY27-7159

24 GY28-6382

GODASHB subroutine of IKADGM
in GRAPHIC JOB PROCESSOR SUPPORT

36 GY27-7159

24 GY28-6382

GOFFSG--off-screen/off-grid subroutine
in GRAPHICS PROBLEM ORIENTED RTNS. 30 GY27-7110

in COBOL (F)
definition
GN Equate Strings
in COBOL (F)
Procedure A-Text format
GN field
in COBOL (F)
GN numbers
in COBOL (F)

24 GY28-6382

GOFORT
-rriTSO COMMAND PROCESSOR VOL6-RUN
data set type PDE in RUNPDL

24 GY28-6382

GNCTR counter
in COBOL (F)

24 GY28-6382

GNEQUR rout ine
in COBOL (F)

24 GY28-6382

GOOD PRACTICE
---"In PL/I SYNTAX CHECKER PLM
faulty statement checking
use comparison matrix for
incorrect error messages
syntax misconceptions

GNIF routine
---"In COBOL (F)

24 GY28-6382

GOODSCAN branch point
in TSO COMMAND PROC VOL6-RENAME

GNSPRT routine
in COBOL (F)

24 GY28-6382

~n COBOL-TO-PL/l LCP

GNTBL table
COBOL (F)

----rn

GO (IN, OUT, TO) routine
in TESTRAN
GO back, dummy
in TESTRAN
GO BACK macro-instruction
in TESTRAN
GO back routine
in TESTRAN
GO statement
in COBOL (F)
GO string
in COBOL (F)
GO subcommand processor (IKJEGGO)
in TSO COMMAND PROCESSOR VOL7-TEST

36 GY28-6776

29 GY33-8009

36 GY28-6776

GOTO

24 GY28-6382
37 GY28-6611

29 GY33-7007

GOTO (keyword statement)
in PL/I SYNTAX CHECKER PLM
argument variable
checking
subroutine GOTO (IKM21)
Goto statement
in ALGOL (F) COMPILER

26 GY33-8000

GOTODP
in COBOL (E)

24 GY24-5009

GOT OED
-rriCOBOL (E)

24 GY24-5009

GOTOKK-IEKWKK
---rn-FORTRAN IV (H) COMPILER

25 GY28-6642

29 GY33- 8009

37 GY28-6611
37 GY28-6611
37 GY28-6611
24 GY28-6382
24 GY28-6382
36 GY28-6777

184

GOTOPR - Graphic
GOTOPR
-rn-COBOL (E)

24 GY24-5009

GOTOPRO
in ALGOL-To-PL/1 LCP

29 GY33-7006

GOTORT

-----rnCOBOL

(E)

24 GY24-5009

GOTOUT
-rn-COBOL (E)

24 GY24-5009

Gotten subtask-area queue element
(GQE)
in MFl' SUPERVISOR
creating
format
releasing

36 GY27-7236

GOTXT subroutine of IKADGM
---rn
GRAPHIC JOB PROCESSOR SUPPORT

36 GY27-7159

GOVRFLB
in MVT SUPERVISOR
format of

36 GY28-6659

G01
in COBOL-TO-PL/1 LCP

29 GY33-7007

in COBOL-TO-PL/1 LCP

29 GY33-7007

G04
---in COBOL-TO-PL/1 LCP

29 GY33-7007

GPGRID--polar grid generation routine
in GRAPHICS PROBLEM ORIENTED RTNS. 30 GY27-7110
GPLSTK table

~COBOL (F)

24 GY28-6382

GPLSTKTBL table
in COBOL (F)

24 GY28-6382

GPRs
--in EMULATOR FOR 7090/7094/7094II

35 GY27-7187

GPSTORD subroutine of IKADGM
in GRAPHIC JOB PROCESSOR SUPPORT

36 GY27-7159

GPVGRD--polar grid generation routine
in GRAPHICS PROBLEM ORIENTED RTNS. 30 GY27-7110
GQUOT
. in ALGOL-TO-PL/1 LCP
GRAB
----in ONLINE TEST EXECUTIVE PROGRAM
GRAB macro
in TCAM SERVICEABILITY AIDS
GRAB Service module
in TCAM SERVICEABILITY AIDS
entry
functions

29 GY33-7006
37 GY28-Ej651
30 GY30-2027
30 GY30-2027

Graphic attention control block
in GRAPHIC SUBRTN. PACKAGE
25 GY27-7152
creation
description
freed
Graphic attention control block (GACB)
in GRAPHICS ACCESS METHOD
30 GY27-7113
Graphic Command Processing
Routine
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
(IKAGCMD)

chart
description of
Graphic Command Processing Routine
(IKAGCMD)
in GRAPHIC JOB PROCESSOR SUPPORT
chart
description of
example of use in overall flow
Graphic control byte (GCB)
in GRAPHICS ACCESS METHOD
Graphic data management
in GRAPHICS ACCESS METHOD
Graphic data output area
in GRAPHIC SUBRTN. PACKAGE
description
establishing
freed
storing data in
writing to buffer
in GRAPHICS PROBLEM ORIENT~D RTNS.
Graphic data output area (GDOA)
in GRAPHICS ACCESS METHOD
Graphic data set
in GRAPHIC SUBRTN. PACKAGE
Graphic data set control block
in GRAPHIC SUBRTN. PACKAGE
description
establishing
termination
Graphic devices
in TCAM SERVICEABILITY AIDS
Graphic devices, data protection of
in ONLINE TEST EXECUTIVE PROGRAM
Graphic Job Processor
in GRAPHIC JOB PROCESSOR SUPPORT
catalogued procedure for
control blocks used by
data sets required by
description of
flow of control in
functions of
initializing the
parts of
relationship to GFX
relationship of routines
routines
starting and stopping the
tables used by
Graphic Job Processor (GJP),
definition of
in s/360 JOB PROCESSING 1130/2250
Graphic modules
in GRAPHICS ACCESS METHOD
directory
with functions
Graphic orders
in GRAPHIC JOB PROCESSOR SUPPORT
construction of
generation of
location in Graphic Work Area
writing
Graphic programming services
in GRAPHICS ACCESS METHOD
Graphic routines
in GRAPHICS ACCESS METHOD
Attention Inquiry routine
Buffer Management Control
routine
Delete Attention routine
Dequeue routine
error handling
Graphic Attention Analysis
routine
Graphic Attention Handling
routine
Graphic Attention Routing (GAR)

36 GY27-7159

30 GY27-7113
30 GY27-7113
25 GY27-7152

30 GY27-7110
30 GY27-7113
25 GY27-7152
25 GY27-7152

30 GY30-2027
37 GY28-6651
36 GY27-7159

36 GY27-7166
30 GY27-7113

36 GY27-7159

30 GY27-7113
30 GY27-7113

185
Graphic routines
I in GRAPHICS ACCESS METHOD
30 GY27-7113
I
Graphic Attention Routing (GAR)
l--------------------------------------(continued)
routine
Graphic Attention service
routine
Graphic CE-XCE Appendage
routine
Graphic CLOSE Executor
Graphic Entry Interface
routine
Graphic Input/Output Control routine
(GIOCR)
Graphic OPEN Executor
Graphic Task Termination
routine
Specify Attention routine
Store Graphic orders routine
(GSTOR)
System Cancel Key
routines
Graphic subroutine package control block
in GRAPHIC SUBRTN. PACKAGE
25 GY27-7152
construction
description
initialization
termination
Graphic terminal control block
in GRAPHIC SUBRTN. PACKAGE
25 GY27-7152
creation
description
termination
Graphic Work Area
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
Attention Correlation Table in
DORLIST in
format of
Intensified Attention Correlation
Table
Order Area in
Graphics access method (GAM)
in GRAPHIC SUBRTN. PACKAGE
25 GY27-7152
in GRAPHICS ACCESS METHOD
30 GY27-7113
Graphics device entry in device table
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
Graphics Initialization
Program (GRIN)
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
Graphics Interface Task
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
catalogued procedure for the
control blocks used by the
description of
example of use
flow of control in
flow of data in
functions of
initializing the
relationship to GJP
relationship to the operating sy'stem
relationship of routines
routines
starting and stopping the
tables used by
Graphics Interface Task (GFX)
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
catalogued procedure for
control blocks used by
description of
external reference table
flow of control in
flowcharts
Microfiche directory
relationship to SGJP
relationship to the

Graphic - GRPORIG

operating system
routines, descriptions of
routines, functions of
routines, relationship of
starting
stopping
tables used by
GRAVERR
in FORTRAN IV (H) COMPILER

25 GY28-6642

GREAD
in COBOL (E)
GREAD macro instruction
in GRAPHICS ACCESS METHOD

30 GY27-7113

GREADR macro instruction
---rn-GRAPHICS ACCESS METHOD

30 GY27-7113

GREATCOMP
in COBOL-TO-PL/l LCP

29 GY33-7007

Greater than
in PL/I SYNTAX CHECKER PLM
> (60-character set)
GT (48-character set)
Greater than or equal to
in PL/I SYNTAX CHECKER PLM
>=(60-character set)
GE (48-character set)

24 GY24-5009

29 GY33-8009

29 GY33-8009

Grid boundaries
in GRAPHICS PROBLEM ORIENTED RTNS. 30 GY27-7110
GRIN
in S/360 JOB PROCESSING 1130/2250
Group
in FORTRAN IV (G) COMPILER
definition
description
Group control block (GCB)
in MVT JOB MANAGEMENT
format and description
use of
Group entry
in TELECOMMUNICATION ACCESS METHOD
Group name
in TSO COMMAND PROC VOL4-LISTALC
in TSO COMMAND PROC VOL5-0PERATCR
Group stats
in FORTRAN IV (G) COMPILER
definition
description
location in storage
sizes
Group stats table
in FORTRAN IV (G) COMPILER
Group Table
in ALGOL (F) COMPILER
Group unit name
in TSO COMMAND PROCESSOR VOLI-ADD
in TSO COMMAND PROCESSOR VOL1-CHNG
GRP.IND
in COBOL

(F)

36 GY27-7166
25 GY28-6638

36 GY28-6660

30 GY30-2029
36 GY28-6774
36 GY28-6775
25 GY28-6638

25 GY28-6638
26 GY33-8000
36 GY28-6771
36 GY28-6771
24 GY28-6382

GRPINDEX
in COBOL-TO-PL/l LCP

29 GY33-7007

GRPLEVEL
in COBOL-TO-PL/l LCP

29 GY33-7007

GRPORIG
in COBOL-TO-PL/1 LCP

29 GY33-7007

186

GRPSIZE - Half

GRPSIZE
in COBOL-To-PL/1 LCP

in S/360-1130 DATA TMN. - FORTRAN

GSCH
in COBOL (E)

GSCB.2
in COBOL (E)

30 GY27-7113

GSPCB
in GRAPHIC SUBRTN. PACKAGE

25 GY27-7152
24 GY28-6382

GRAPHICS ACCESS METHOD

21 GY26-3700

GTPB
---rn TSO COMMAND PROC VOL5-0PERATOR
data area
in data area directory
in TSO TMP 6 SERVICE ROUTINES

36 GY28-6775
36 GY28-6770

GTPBIBUF, field in GTPB
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

GTPRO
---rn
FORTRAN

29 GY33-7000

IV-TO-PL/1 LCP

25 GY27-7161
36 GY27-7166

25 GY27-7152

GTRED
---rn
S/360 JOB
System/360

30 GY27-7113

1130 use of
GTRED routine description
in S/360-1130 DATA TMN. - FORTRAN

25 GY27-7161

GTSIZE macro instruction, processing
for
in TSO CONTROL PROGRAM

36 GY28-7199

GTWRT
---rn

36 GY27-7166

GSTOR

---rn

GTOX
---rn ASSEMBLER (F)

GTP01 routine description
in S/360-1130 DATA TMN. - FORTRAN

GSPLOT--data plotting routine
in GRAPHICS PROBLEM ORIENTED RTNS. 30 GY27-7110
GSPRD
in GRAPHIC SUBRTN. PACKAGE

21 GY26-3700

24 GY24-5009

---rn

GSPICT routine
in COBOL (F)

GTOR
in ASSEMBLER (F)
24 GY24-5009

GSDPLT--data plotting routine
in GRAPHICS PROBLEM ORIENTED RTNS. 30 GY27-7110
GSERV macro instruction
GRAPHICS ACCESS METHOD

25 GY27-7161

29 GY33-7007

GSVPLT--data plotting routine
in GRAPHICS PROBLEM ORIENTED RTNS. 30 GY27-7110

PROCESSING 1130/2250
use of

GT
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

block)
---rn S/360-1130 DATA TMN. - FORTRAN
GTCB (system/360
telecommunications control

25 GY27-7161

GTCLT
---rn
S/360

36 GY27-7166

JOB PROCESSING 1130/2250
system/360 use of
1130 use of
GTCLT routine description
in S/360-1130 DATA TMN. - FORTRAN
GTCOM (1130 telecommunications
control block)
in S/360-1130 DATA TMN. - FORTRAN

GTEND
in S/360 JOB PROCESSING 1130/2250
System/360 use of
1130 use of
GTEND routine description
in S/360-1130 DATA TMN. - FORTRAN
GTEXTLEN, field in work area
in TSO COMMAND PROC VOL5-0PERATOR
GTFBASEO
in CRJE PLM
GTLNG field
---rn
COBOL (F)
GTMCB
---rn
GRAPHIC SUBRTN. PACKAGE
GTNIT
---rn
S/360 JOB PROCESSING 1130/2250
use of
Syste~360

1130 use of
GTNIT routine description

S/360 JOB PROCESSING 1130/2250
System/360 use of
1130 use of
GTWRT routine description
in S/360-1130 DATA TMN. - FORTRAN

25 GY27-7161

GVARC--circular arc generation routine
in GRAPHICS PROBLEM ORIENTED RTNS. 30 GY27-7110
GWRITE macro instruction
---rn-GRAPHICS ACCESS METHOD

30 GY27-7113

GWT storage
in MVT JOB MANAGEMENT
release of

36 GY28-6660

GOOOOVOO
in CATALOG MANAGEMENT
in TSO CATALOG MANAGEMENT

30 GY28-6606
36 GY28-6745

25 GY27-7161

25 GY27-7161
36 GY27-7166

25 GY27-7161

1! 36 GY28-6775
36 GY30-2011

m

in TSO COMMAND PROCESSOR VOL3-EDIT
H format code
in FORTRAN IV (H) COMPILER
H operator
in FORTRAN IV SYNTAX CHECKER PLM
H-set converter-IEBGENER
in UTILITIES

36 GY28-6773
25 GY28-6642
25 GY28-6831
32 GY28-6614

24 GY28-6382
25 GY27-7152
36 GY27-7166

Half ESD prefix
in LINKAGE EDITOR (F)
Half ESD table (HESD)
in LINKAGE EDITOR (F)
contents
format
in ENTAB creation
production of
saving relocation factors in

31 GY28-6667
31 GY28-6667

187
Half-word integer division skeleton
instructions
in FORTRAN IV (H) COMPILER
HALF WORD SCALAR roll
in FORTRAN IV (G) COMPILER
Halfword binary items
in PLiI (F) COMPILER

25 GY28-6642
25 GY28-6638
29 GY28-6800

Halt
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
conditions
instructions, simulation of
HALT command
in CONTROL PROGRAM WITH MFT
36 GY27-7128
HALT command (SVC 76)
in MVT JOB MANAGEMENT
36 GY28-6660
Halt conditions, 7074
in 7074 EMULATE FOR M/165
GY27-7228
Halt I/O
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
interaction with I/O supervisor
(diagram)
use of DEB
use of I/O halt routine
described
diagram
use of IRB (interrupt request block)
with multiprocessing
purge routine
SIRB (system interrupt request block)
UCB (unit control block)
HALTSWCH
in EMULATOR FOR 7090/7094/709411
format
use

35 GY27-7187

Handler
in INTRO. TO CONTROL PROGRAM LOGIC 36 GY28-6605
input/output
program
SVC
Handling SYS1.LOGREC records for Model
in UTILITIES
32 GY28-6614
Hang up processing
in TSO CONTROL PROGRAM
by QTIP
Hang Up subroutine of TCAM (IEDAYH),
general description
in TSO CONTROL PROGRAM
Hard copy log
in INITIAL PROGRAM LOADER AND NIP
need for
message buffer
parameter
verifying requirements
Hard errors
in MACHINE-CHECK HANDLER, M135/145
in MACHINE-CHECK HANDLER, M155/165
Hard machine check
in MACHINE-CHECK HANDLER, M135/145
Hard machine-check interruptions
in MACHINE-CHECK HANDLER, M155/165
Hard stop
in MACHINE-CHECK HANDLER, M135/145
Hard stop state
in MACHINE-CHECK HANDLER, M155/165

36 GY28-7199

Ha~f

- Header

mode control register
recovery features of Models
and 145
Hardware Error Analysis
function
in MACHINE-CHECK HANDLER, S360 M85 31 GY27-7184
Hardware representations
in ALGOL-TO-PL/1 LCP
29 GY33-7006
"hash" value (INDEXMODULO)
---rn-COBOL-TO-PL/1 LCP
Hash chain, used to scan dictionary
---rn PL/I (F) COMPILER
Hash chains
in PL/I (F) COMPILER
HASH Routine
in COBOL (E)
Hash table
in ASSEMBLER (F)
in PL/I (F) COMPILER
address
deleted
in dictionary
HASH table
in COBOL (F)

29 GY33-7007
29 GY28-6800
29 GY28-6800
24 GY24-5009
21 GY26-3700
29 GY28-6800

24 GY28-6382

Hashed-Name Table

~COBOL (E)

24 GY24- 5009

Hashing
in ASSEMBLER (F)

21 GY26-3700

HBADDSR routine
in TESTRAN

37 GY28-6611

HCC
---in ASSEMBLER (F)

21 GY26-3700

HCOMPMOD Control Field
in ALGOL (F) COMPILER

26 GY33-8000

HDSVL1, field in CBHDSAV
---rn-TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

HDSV01, fie~d in CBHDSAV
---rn-TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

Head of equivalence group
in FORTRAN IV (H) COMPILER
Head switching-IEBCOPY
in UTILITIES

25 GY28-6642
32 GY28-6614

36 GY28-7199
HEADADDR, field in CTRLTAB
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
36 GY28-6661

30 GY27-7237
30 GY27-7198
30 GY27-7237
30 GY27-7198
30 GY27-7237
30 GY27-7198

Hardware
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
error analysis
malfunctions" types

Header
---rn-TELECOMMUNICATION ACCESS METHOD
Header and text on the DASD queue
in QUEUED TELECOMM. ACCESS METHOD
H"eader block
in TSO COMMAND PROCESSOR VOL1-ADD
in TSO COMMAND PROCESSOR VOL1-CHNG
in TSO COMMAND PROCESSOR VOLl-LIST
Header buffer
in TELECOMMUNICATION ACCESS METHOD
Header field, UADS
in TSO COMMAND PROC VOL1-SUBRTNS
Header information-IEBCOMPR
in UTILITIES
Header information-IEBPTPCH
in UTILITIES
Header labels, 7094, writing
in EMULATOR FOR 7090/7094/709411
tape postprocessor
tape preprocessor

30 GY30-2029
30 GY30-2002
36 GY28-6771
36 GY28-6771
36 GY28-6771
30 GY30-2029
36 GY28-6771
32 GY28-6614
32 GY28- 6614
35 GY27-7187

I!C

II

188

Header - Hierarchy

Header record format-SYS1.LOGREC
in UTILITIES
Header segment
in TELECOMMUNICATION ACCESS METHOD
HEADER1, field in EXITWORK
in TSO COMMAND PROC VOL5-0PERATOR
HEADER2, field in EXITWORK
in TSO COMMAND PROC VOL5-0PERATOR
Heading
in FORTRAN
printing
in FORTRAN
position

IV (E)
of
IV (G) COMPILER
in object module

HEADOPT routine
in FORTRAN IV (G) COMPILER
HEDBPTR, field in BASE POINTERS
in TSO COMMAND PROCESSOR VOL1-ADD

in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
32 GY28-6614
30 GY30-2029
36 GY28-6775
36 GY28-6775
25 GY28-6601

25 GY28-6638
36 GY28-6771

HELP
----rn TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
control module (IKJEFH01)
data messages
data set
error messages
messages CSECT (IKJEFHOO)
message processing routine (IKJEFF02)
processor has been entered, indicator
processing routine (IKJEFH02)
processing summary
READ routine
restrictions
use of two modules from SUBMIT
event control block (ECB)
HELP command, description of
use
in TSO CONTROL PROGRAM
36 GY28-7199
HELP command processing
in TSO COMMAND PROCESSOR VOL1-ACCT 36 GY28-6771
event control block for
parameter list for
service routine for
HELP command processor
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
entry to
hierarchy
method of operation
processing description
program organization
restrictions
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
attaching and detaching by Mainline
( flowchart)
interrupted by an Attention (diagram)
Help messages
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
HELP messages
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY28-6772
HELP subcommand
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
summary of operations
syntax
HELP subcommand, in IKJEFF63
in TSO COMMAND PROC VOL5-0UTPUT
36 GY28-6775
HELP TCB, address of
in TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6775

HELPPCL, control section

36 GY28-6775

HESD
in LINKAGE EDITOR (F)

31 GY28-6667

HEX CONST roll
---in FORTRAN IV (G) COMPILER

25 GY28-6638

25 GY28-6638

'held' areas
---rn-DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607

HELPBIT, field in WORKAREA
in TSO COMMAND PROC VOL5-0PERATOR

HERE
in TSO COMMAND PROC VOL5-0UTPUT
in operation
in PDL

36 GY28-6775

Hexadecimal
in ONLINE TEST EXECUTIVE PROGRAM
conversion of
Hexadecimal edit routine
in TESTRAN

37 GY28-6651
37 GY28-6611

HIARCHY statement
in LINKAGE EDITOR (F)
31 GY28-6667
general description of processing
in intermediate output processing
operation diagram
processor
Hiearchy support
in MFT SUPERVISOR

36 GY27-7236

Hierarchy
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
parameter
structure
support
in INTRO. TO CONTROL PROGRAM LOGIC 36 GY28-6605
in TSO COMMAND PROC VOL4-LISTBC
36 GY28-6774
calling sequence
when entered by LOGON
when entered by TMP
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
of program modules
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
in TSO TMP & SERVICE ROUTINES
36 GY28-6770
Catalog Information Routine
Command Scan service routine
Default Service routine
Dynamic Allocation Interface Routine
Dynamic Allocation routines
GETLINE service routine
Parse service routine
PUTGET service routine
PUTLINE service routine
STACK service routine
Terminal Monitor Program
Hierarchy, control module
in TSO COMMAND PROC VOL6-TERMINAL 36 GY28-6776
Hierarchy, module
in TSO COMMAND PROC VOL1-BROADCAST 36 GY28-6771
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
Hierarchy, of delete subcommand processor
subroutines
in TSO COMMAND PROC VOL1-DELETE
36 GY28-6771
Hierarchy, program
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY28-6772
in TSO COMMAND PROC VOL6-PROFILE
36 GY28-6776
in TSO COMMAND PROC VOL6-PROTECT
36 GY28-6776
in TSO COMMAND PROC VOL6-RENAME
36 GY28-6776
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
Hierarchy, program module
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
Hierarchy (calling sequence)
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
Hierarchy chart
in TSO COMAND PROC VOL2-CNCLISTATUS36 GY28-6772
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
in TSO COMMAND PROC VOL5-0UTPUT
36 GY28-6775

189
Hierarchy chart
L--------------------------------------(continued)
in TSO COMMAND PROC VOL6-SUBMIT
36 GY28-6116
Hierarchy chart, program
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6116
Hierarchy codes (Phase F1)
21 GY26-3100
in ASSEMBLER (F)
Hierarchy format attribute (HIAR)
31 GY28-6661
in LINKAGE EDITOR (F)
Hierarchy information
in TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6115
hierarchy of
in TSO COMMAND PROCESSOR VOL1-ACC~ 36 GY28-6111
Hierarchy of ATLCBs
in GRAPHIC SUBRTN. PACKAGE
25 GY21-1152
Hierarchy of LIS~CAT command processor
in TSO COMMAND PROC VOL5-LISTCAT
3~ GY28-6115
Hierarchy of modules
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6111
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6714
Hierarchy of operators
in COBOL (F)
24 GY28-6382
definition
in FOR~RAN IV (E)
25 GY28-6601
Hierarchy of routines
in TSO COMMAND PReC VOL4-LISTALC
36 GY28-6114
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6111
GY21-1228
in 1014 EMULATE FOR M/165
HIERARCHY parameter
36 GY28-6660
in MVT JOB MANAGEMENT
in START command
in EXEC statement
Hierarchy support
36 GY21-1128
in CONTROL PRCGRAM WITH MFr
Hierarchy table
in LINKAGE EDITOR (F)
31 GY28-6661
High ID table (HIlD)
in LINKAGE EDITOR (F)
construction of
contents
format
making an entry in
High-level indexes
in INDEXED SEQUEN. ACCESS METHOD
BISAM processing
definition
format
load mode processing
High-level name
in CATALOG MANAGEMENT
in TSO CATALOG MANAGEMENT
HIGH/LOW function
in PL/I SUBROUTINE LIBRARY
High-resolution timer
in MACHINE-CHECK HANDLER, M135/145
High-speed buffer
in MACHINE-CHECK HANDLER, M155/165
in MACHINE-CHECK HANDLER. 5360 M85
description of
disabling of
error in
recovery method for
failures
sector deletion
High-Speed mode
in EMULATOR FOR 1090/1094/109411
High Speed Multiply feature
in MACHINE-CHECK HANDLER, s360 M85
description of
error in
recovery method for
failures
High water mark
in DIRECT ACCESS DEVICE SPACE MGT.
creation on DOS volumes

31 GY28-6661

30 GY28-6618

30 GY28-6606
36 GY28-6145

Hierarchy - HOLD

description
updating
HIID
---rn LINKAGE EDITOR (F)

31 GY28-6661

HIO request
in TCAM SERVICEABILITY AIDS

30 GY30-2021

HIR (Hardware Instruction Retry)
---in MACHINE-CHECK HANDLER. M155/165 30 GY21-1198
in MACHINE-CHECK HANDLER, 5360 M85 31 GY21-1184
HIR parameter of MODE command
in MACHINE-CHECK HANDLER, M155/165 30 GY21-1198
HISTORY
in TSO COMMAND PROC VOL4-LISTALC
operand
processing
History area
in GRAPHIC JOB PROCESSOR SUPPORT

36 GY28-6114

36 GY21-1159

in CCT

maintaining the
in 5/360 JOB PROCESSING 1130/2250
in CCT
maintaining the
HISTORY keyword
in TSO COMMAND PROC VOL5-LISTDS
function
processing
History number
in S/360 JOB PROCESSING 1130/2250
History of executed modules
in MACHINE-CHECK HANDLER, M13S/145
in MACHINE-CHECK HANDLER, M155/165
History of operations
in GRAPHIC JOB PROCESSOR SUPPORT
History processing
in TSO COMMAND PROC VOL5-LISTCAT
diagram of
History records
in S/360 JOB PROCESSING 1130/2250
History table
in TSO COMMAND PROC VOL6-SUBMIT
created
description
used

36 GY21-1166

36 GY28-6115

36 GY21-1166
30 GY21-1231
30 GY21-1198
36 GY21-1159
36 GY28-6115
36 GY21-1166
36 GY28-6116

HISTPT, in control table
---rn-TSO COMMAND PROC VOL6-SUBMIT

36 G~28-6116

HLABEL card
---rn-EMULATOR FOR 7090/1094/109411

35 GY21-1187

29 GY28-6801
30 GY21-1231
30 GY21-1198
31 GY21-1184

35 GY21-1181

HLPECB (HELP command processor ECB)
in TSO COMMAND PROCESSOR VOLl-ACCT 36 GY28-6111
fields in
on completion of HELP command
processing
use
HLPPL (ACCOUNT HELP parameter list)
in TSO COMMAND PROCESSOR VOL1-ACCT 36 GY28-6111
fields in
initialization of
input to IKJEFHOO
size of

31 GY21-1184
HNBUF parameter list
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029

30 GY28-6601

HOLD command
---rn CONTROL PROGRAM WITH MFr
in MVT JOB MANAGEMENT
execution of

36 GY21-1128
36 GY28-6660

IJ

190

Bo1d - I/O

Hold function of an MH
in TELECOMMUNICATION ACCESS METHOD 30
HOLD macro expansion linkage
in TELECOMMUNICATION ACCESS METHOD 30
HOLD parameter list
in TELECOMMUNICATION ACCESS METHOD 30
Hold queue
in MVT JOB MANAGEMENT
36
entry class change for
in TSO COMAND PROC VOL2-CNCL/STATUS36
HOLD queue
in CONTROL PROGRAM WITH MFT
36
Hold queues
in TELECOMMUNICATION ACCESS METHOD 30
Hold/release terminal routine
in TELECOMMUNICATION ACCESS METHOD 30
cross reference table
flowchart
library
microfiche directory
module description
register usage

in COBOL (E)
GY30-2029
GY30-2029
GY28-6660

HSH9
in COBOL

24 GY24-5009

(E)

Hyphen (used by system)
in PL/I SYNTAX CHECKER PLM
end-of-line signal

29 GY33-8009

GY28-6772
in CONTROL PROGRAM WITH MFT

36 GY27-7128

in

36 GY27-7128

GY27-7128
GY30-2029
GY30-2029

Hole count
---rn DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
Housekeeping
in MVT JOB MANAGEMENT
allocation
JFCB
termination routine
in PL/I (F) COMPILER
Housekeeping functions
in CATALOG MANAGEMENT
in TSO CATALOG MANAGEMENT

30 GY28-6606
36 GY28-6745

How statements are checked
---in PL/I SYNTAX CHECKER PLM

29 GY33-8009

HQOUTPUT routine
in TESTRAN

37 GY28-6611

36 GY28-6660

29 GY28-6800

HSH

in COBOL (E)

24 GY24-5009

HSl:Il
in COBOL (E)

24 GY24-5009

HSHI0
in COBOL (E)

24 GY24-5009

HSHll
in COBOL (E)

24 GY24-5009

HSH12
in COBOL (E)

24 GY24-5009

HSH2
in COBOL (E)

24 GY24-5009

HSH20
in COBOL (E)

24 GY24-5009

HSH21
in COBOL (E)

24 GY24-5009

HSH22
in COBOL (E)

24 GY24-5009

HSH6
in COBOL (E)

24 GY24-5009

HSH7
in COBOL (E)

24 GY24-5009

HSli8

24 GY24-5009

GY30-2029

1. -

CO~ROL

PROGRAM WITH MFT

o

in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
(Information) messages
in MACHINE-CHECK HANDLER, 5360 M85 31 GY27-7184
I format
in FORTRAN IV-TO-PL/l LCP
29 GY33-7000
I-format code
in FORTRAN IV-To-PL/l LCP
29 GY33-7000
I/O
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
in MACHINE-CHECK HANDLER, 1~135/145 30 GY27-7237
and module loading
communications area
Initialization, IGFLOAD
interruption
new PSW
Supervisor
in TSO CO~MAND PROC VOL4-LISTBC
36 GY28-6774
all functions performed by
error indicator
processing module (IKJEES75)
I/O (input/output) interruption
in SEQUENTIAL ACCESS METHODS
30 GY28-6604
I/O address buffers
in TSO COMMAND PROC VOLI-B~OADCAST 36 GY28-6771
for MAIL directory records
for MAIL message records
for userids
I/O and module loading
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
I/O appendages
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
I/O block
in MVT SUPERVISOR
36 GY28-6659
for the I/O supervisor transient area
entry point name of
module name for
for the SVC transient areas
entry point names of
module name for
I/O buffers, broadcast data set
in TSO COMMAND PROC VOLI-BROADCAST 36 GY28-6771
for addressing MAIL di
rectory rec ords
for addressing MAIL message records
for addressing userids
for MAIL directory record I/O
processing
for MAIL message labeling
for MAIL message-record I/O
processing
I/O check indicator
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
I/O communication, TOTE to operator
30 GY30-2027
in TCAM SERVICEABILITY AIDS
I/O control-allocation
31 GY28-6714
in LOADER
description of
I

191
I-O-Control Paragraph
in COBOL (F)
24 GY28-6382
I-O-CONTROL paragraph. processing
in COBOL-TO-PLll LCP
29 GY33-7007
I/O control table. address of text note
list on SYSUTl
in LINKAGE EDITOR (F)
31 GY28-6667
I/O data
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
control of (diagram)
in queue (diagram)
scheduling by use of control blocks
blocks
starting I/O operations
channel search routines
devices
validation of data
l/O delay
in 7074 EMULATE FOR M/165
GY27-7228
I/O Delay Command routine (IITIOD)
in EMULATOR FOR 7090/1094/709411
35 GY27-7187
I/O device allocation routine
in MVT JOB MANAGEMENT
36 GY28-6660
command~ executed by
functions performed by
recovery routines
use of
I/O devices
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
direct access devices
defined in glossary
starting I/O
failure of and actions taken
magnetic tape devices
unit record and communications devices
volume verification
2319 Disk storage device
I/O emulation routines
in 7074 EMULATE FOR M/165
GY27-1228
data movement
description
flowcharts
card reader
console
data management interface
tape
MOD
I/O error
in ALGOL (F) COMPILER
26 GY33-8000
I/O error analysis routine. invocation of
in TSO COMMAND PROC VOL1-SUBRTNS
36 GY28-6771
from IKJEFA51
from IKJEFA52
I/O error-IEBISAM
in UTILITIES
32 GY28-6614
I/O error-IEBTCRIN
in UTILITIES
32 GY28-6614
I/O error message
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6714
I/O error messages
in TSO COMMAND PROC VOLI-SUBRTNS
36 GY28-6771
analysis of
cause of
in reading userids into main storage
in updating user ids
list of
terminal message service routine for
I/O error recovery procedure
in FORTRAN IV (E)
25 GY28-6601
compile-time
object-time
I/O error routines
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
1052 error routine
1285. 1287. and 1288 error routine
1403 and 1443 error routine

J: -

I/O

1419/1275 error routine
1442. 2501. and 2502 error routine
2250 error routine
2260 and 1053 error routine
2301. 2302. 2303. 2311. and 2314 error
routine
2400 error routines
2495 error routine
2540 error routine
2611 error routine
5450 error routine
I/O errors
in MACHINE-CHECK HANDLER. M155/165 30 GY27-7198
I/O First-Level Interruption Handler
in MVT SUPERVISOR
36 GY28-6659
description of
entry pOint name(s) of
flowchart of
module name for
synopsis of
I/O FLIH
in MVT SUPERVISOR
36 GY28-6659
I/O FLIH (first level interruption
handler)
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
I/O flow
in LINKAGE EDITOR (F)
31 GY28-6667
I/O Functions for System Units
in COBOL (E)
24 GY24-5009
I/O Functions for Work Data Sets
in COBOL (E)
24 GY24-5009
I/O functions of an application
program
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
input
output
I/O GETMAIN errors. processing of
in TSO COMMAND PROC VOLl-BROADCAST 36 GY28-6771
I/O indicators
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
I/O Interrupt Handler
in MACHINE-CHECK HANDLER. S360 M85 31 GY27-7184
I/O interruption
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
use of CSW
use of RQE
volume verification
I/O interruption supervisor
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
described in module directory
diagrams of operation
I/O supervisor interaction
messages to operator
SIO instruction
in MVT SUPERVISOR
36 GY28-6659
entry point name of
module name for
synopsis of
I/O interruptions
i.n MVT SUPERVISOR
36 GY28-6659
I/O labelling buffer
in TSO COMMAND PROC VOL1-BROADCAST 36 GY28-6771
I/O List
in FORTRAN IV-To-PL/1 LCP
29 GY33-7000
I/O list items
in FORTRAN IV (E)
25 GY28-6601
object-time processing of
I/O message fields
in TSO COMMAND PROe VOLl-SUBRTNS
36 GY28-6771
construction of
for first level errors
for second level errors
I/O module
in TSO-COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
I/O module (IKJEGIO)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6717

IiJ
II)

I/O - XBCDASDX
I/O module (IKJEGIO)
I in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
L--------------------------------------(continued)
diagrams of
flowcharts of
module description of
text description of
I/O operation
in TSO CONTROL PROGRAM
36 GY28-7199
as indication of long wait
condit i'on
Purge I/O Parameter List
initialization of
purge of
options specified
restoring when user is swapped
in
I/O overlap processing
in 7074 EMULATE FOR M/165
GY27-7228
description
I/O parameter block
in TSO COMMAND PROC VOLI-SUBRTNS
36 GY28-6771
I/O parameter block, pointer to
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
I/O parameter list
36 GY28-6771
in TSO COMMAND PROC VOLI-SUBRTNS
I/O Parameter List (IOPL)
in TSO TMP & SERVICE ROUTINES
36 GY28-6770
format
use by GETLINE service routine
use by PUTGET service routine
use by PUTLINE service routine
use by STACK service routine
I/O parameter lists
in TSO COMMAND PROC VOLl-BROADCAST 36 GY28-6771
for MAIL directory processing
for messages to terminal
I/O process ing
in FORTRAN IV SYNTAX CHECKER PLM
25 GY28-6831
I/O processing, broadcast interface
in TSO COMMAND PROC VOLI-BROADCAST 36 GY28-6771
buffers for
opening SYS1.BROADCAST data set
parameter list for
performed by IEEVSDIO
reading in pointer to MAIL directory
records
return codes from
I/O purge routine (IGE0025E)
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
I/O queues" clearing of
in TSO CONTROL PROGRAM
36 GY28-7199
I/O requests
in FORTRAN IV (E)
25 GY28-6601
compile-time processing of
I/O requests and I/O operations in process
in MVT SUPERVISOR
36 GY28-6659
purging of
I/O requirements
in ASSEMBLER (F)
21 GY26-3700
I/O routine
in FORTRAN IV (E)
25 GY28-6601
in interface module
in performance module
I/O Service Routine List
in TSO TMP & SERVICE ROUTINES
36 GY28-6770
format
use by GETLINE service routine
use by PUTGET service routine
use by STACK service routine
I/O service routine parameter block
in TSO COMMAND PROC VOL6-PROTECT
36 GY28-6776
pointer to in IOPL
I/O service routines
in TSO COMMAND PROCESSOR VOLI-ACCT 36 GY28-6771
parameter list for

192
PUTGET
PUTLINE
I/O service subroutines
in TSO COMMAND PROC VOLI-SUBRTNS
36 GY28- 6771
callers of
error messages from
for augmenting user attribute data
list
for copying user entries into main
storage
for transmitting terminal
messages
for updating user attribute data list
load modules residence of
parameter block for
register activity
I/O simulation routines
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
flow of control within
functi ons of
I/O statements
in FORTRAN IV (E)
25 GY28-6601
object-time implementation of
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
ordinary
record orientated
I/O supervisor
in INPUT/OUTPUT SUPERVISOR
30 GY28- 6616
charts
control alocks provided by user
(diagram)
control programs (diagram)
definition of routines and subroutines
error EXCP supervisor
EXCP supervisor
EXCP validity check
functions of
immediate I/O operations, defined
I/O interrupt volume verification
I/O purge routine, in module directory
messages
placement of completion codes
user interaction with I/O supervisor
in JOB MANAGEMENT
36 GY28-6613
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
in TSO CONTROL PROGRAM
36 GY28-7199
interface with swap
operations
I/O supervisor transient area
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
in MVT SUPERVISOR
36 GY28-6659
entry point name of
synopsis of
I/O supervisor UCB lookup table
in JOB MANAGEMENT
36 GY28-6613
I/O support, updating XCTL tables for
in UTILITIES
32 GY28-6614
I/O switch (IORGSW)
in MVT SUPERVISOR
36 GY28-6659
I/O Table
in ALGOL (F) COMPILER
26 GY33-8000
I/O Tables
in COBOL (E)
24 GY24-5009
I/O Trace Dump flow
in TCAM SERVICEABILITY AIDS
30 GY30-2027
I/O work area, pointers to
in TSO COMMAND PROC VOLI-DELETE
36 GY28-6771
lABS in-line function
----rn FORTRAN IV (E)
compile-time processing of

25 GY28-6601

IBCDASDI
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
in UTILITIES
32 GY28-6614

193
IBCDMPRS
in UTILITIES

32 GY28-6614

IBCOM,IBCOM#
in FORTRAN IV

(H)

COMPILER

25 GY28-6642

I BCOMRTN
in FORTRAN IV

(li)

COMPILER

25 GY28-6642

IBCRCVRP
in UTILITIES
IBEXIT
in FORTRAN IV (H) COMPILER
IBEXIT routine
in FORTRAN IV (G) COMPILER
IBFINT
---rn-FORTRAN IV (8) COMPILER
IBFINT routine
in FORTRAN IV (G) COMPILER

32 GY28-6614
25 GY28-6642
25 GY28-6638
25 GY28-6642

XBCDMPRS - Identification
ICLSDEND
in COBOL-TO-PL/1 LCP

29 GY33-7007

ICMDBUF (PUTGET service routine input
buffer)
in TSO COMl4AND PROCESSOR VOLl-ACCT 36 GY28-6771
created by IKJPTGT
fields in
size of
ICOPY macro expansion linkage
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
ICOPY service routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
reg ister usage

25 GY28-6638
ICR

IBM flaga area
in TSO COMMAND PROC VOLl-DELATE
IBM standard label
in MVT JOB MANAGEMENT
IBM Systeml360 operating system
in ALGOL-TO-PL/1 LCP
IBM 1419/1275 support, overview
in IBM 1419/1275 DEVICE DEP. BSAM
IBM 2250 Display Unit
in GRAPHICS ACCESS METHOD
IBM 2260 & 2265 Display Stations
in TCAM SERVICEABILITY AIDS
IBM 2260 Display Station (Local
Attachment)
in GRAPHICS ACCESS METHOD
IBM 2280/82 Film Units
in GRAPHICS ACCESS METHOD
IBM 2840 Display Control
in GRAPHICS ACCESS METHOD
IBUFPTR, field in AXPL
in TSO COMMAND PROC VOL5-0PERATOR

in CRJE PLM

36 GY30-2011

36 GY28-6771
36 GY28-6660
29 GY33-7006

ICTL
--in ASSEMBLER

(F)

lCURS
in GRAPHIC SUBRTN. PACKAGE

21 GY26-3700
25 GY27-7152

30 GY21-0012
30 GY27-7113
30 GY30-2027
30 GY27-7113
30 GY27-7113
30 GY27-7113
36 GY28-6775

ID-length list
in LINKAGE EDITOR (F)
in LOADER
ID of messages
in TSO COMMAND PROC VOL2-DELETE
ID option
in FORTRAN IV (H) COMPILER
IDAREA
in TSO COMMAND PROC VOL5-0PERATOR
data area
in data area directory

31 GY28-6667
31 GY28-6714
36 GY28-6772
25 GY28-6642
36 GY28-6775

IDCNT

---rn

TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
field in COMMON
operation

in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
IC, 7074
in 7074 EMULATE FOR M/165
GY27-7228
definition
use during emulation
IC-Text
in COBOL (F)
24 GY28-6382

IDDSCN routine
---rn-COBOL (F)

24 GY28-6382

IDELNM routine
---rn-COBOL (F)

24 GY28-6382

lCAM (In-Core Access Method)
---Yn S/360 JOB PROCESSING 1130/2250

IDEND
--rn
COBOL

(E)

24 GY24-5009

IDENT routine
COBOL (F)

24 GY28-6382

36 GY27-7166

ICHNG
in
ICHNG
in

macro expansion linkage
TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
processing routine
TELECOMMUNICATION ACCESS METHOD jo GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage

---rn

ICL
in COBOL-To-PL/1 LCP

29 GY33-7007

ICLF
----"In COBOL-TO- PL/1 LCP

29 GY33-7007

ICLFDBEG
in COBOL-To-PL/1 LCP

29 GY33-7007

Identification Division
in COBOL (F)
Identification function
in MACHINE-CHECK HANDLER, S360 M85
Identification of loaded program
in LOADER
purpose of
processing
processor (IEWLIDEN)
flowchart of
synopsis of
saving extent information for
Identification record
in COBOL-TO-PL/1 LCP

24 GY28-6382
31 GY27-7184
31 GY28-6714

29 GY33-7007

III

194

Identifier - IEAKYLP

Identifier
in ALGOL (F) COMPILER
26 GY33-8000
entry in Identifier Table
object time storage field
internal name
replacement by internal name
in ALGOL-TO-PL/1 LCP
29 GY33-7006
Identifier entry
in ALGOL (F) COMPILER
26 GY33-8000
Identifier Group Number
in ALGOL (F) COMPILER
26 GY33-8000
Identifier Table
in ALGOL (F) COMPILER
26 GY33-8000
Identifier Table Manipulation Phase (IEX20)
in ALGOL (F) COMPILER
26 GY33-8000
Description
Flowcharts
Identifiers
in PL/I (F) COMPILER
29 GY28-6800
contextual use
implicit definition
in compile-time processor output
string
in dictionary logical phase
in multiple declarations
when rejected
in PL/I SYN'!'AX CHECKER PLM
29 GY33-8009
as keywords:
statements
as var iables
break character within
in expressions
IDENTIFY
in MFT SUPERVISOR
entry point
flowchart
functional description
module description
module synopsis
IDENTIFY macro
in PL/I SUBROUTINE LIBRARY
IDENTIFY macro instruction
in LOADER
issuance of
parameter list
creation of
format of
Identify matrix
in SORT/MERGE
Identify routine
in MVT SUPERVISOR
description of
entry point name(s) of
flowchart of
module name for
synopsis of
Identify routine (IKJEFF07)
in TSO COMMAND PROC VOL6-SUBMIT
description
used
IDENTL field
-rnCOBOL (F)

36 GY27-7236

24 GY24-5009

IDGEND
in COBOL (E)

24 GY24-5009

IDLENPTR. in EXITPARM
in TSO COMAND PROC VOL2-CNCL/STATUs36 GY28-6772
IDLHN routine
in COBOL (F)

24 GY28-6382

IDNET routine
in COBOL (F)

24 GY28-6382

IDNEXT
in COBOL (E)

24 GY24-5009

IDPOS
in GRAPHIC SUBRTN. PACKAGE

25 GY27-7152

IDPRO

---rn

ALGOL-TQ-PL/1 LCP

29 GY33-7006

IDSJFCBP
in TSO COMMAND PROC VOL5-0UTPUT

36 GY28-6775

IDSSW
in TSO COMMAND PROC VOL5-0UTPUT

36 GY28-6775

IDTBL. field in COMMON
TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6775
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776

---rn

IDUSRID. field in COMMON
in TSO COMMAND PROC VOL5-0PERATCR 36 GY28-6775
IDUSRID (send list)
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
IDV
in PL/I (F) COMPILER

29 GY28-6800

29 GY28-6801
31 GY28-6714

33 GY28-6597
36 GY28-6659

36 GY28-6776

24 GY28-6382

IDENT1
in ALGOL-To-PL/1 LCP

29 GY33-7006

IDEXIR. in routine directory
in TSO COMMAND PROCESSOR VOL1-ADD

36 GY28-6771

IDEXT

--rn ALGOL-To-PL/1

IDGA
in COBOL (E)

LCP

29 GY33-7006

IDEXT6
in ALGOL-TO-PL/1 LCP

29 GY33-7006

IEAADDR
in INITIAL PROGRAM LOADER AND NIP

36 GY28-6661

IEAAERP
in INITIAL PROGRAM LOADER AND NIP

36 GY28-6661

IEACOMLP
in INITIAL PROGRAM LOADER AND NIP

36 GY28-6661

IEACOMON
in INITIAL PROGRAM LOADER AND NIP

36 GY28-6661

lEACONS1
in INITIAL PROGRAM LOADER AND NIP

36 GY28-6661

lEADQTCB
in MVT SUPERVISOR

36 GY28-6659

IEAEPSIM
in INITIAL PROGRAM LOADER AND NIP

36 GY28-6661

lEAHEAD
in MVT SUPERVISOR

36 GY28-6659

lEAHOH1
in INITIAL PROGRAM LOADER AND NIP

36 GY28-6661

lEAIGEOO
in INITIAL PROGRAM LOADER AND NIP

36 GY28-6661

lEAKYLP
in INITIAL PROGRAM LOADER AND NIP

36 GY28-6661

195
IEALOCAT
in INITIAL PROGRAM LOADER AND NIP

36 GY28-6661

IEAMP650
in INITIAL PROGRAM LOADER AND NIP

36 GY28-6661

IEANUC01
in INITIAL PROGRAM LOADER AND NIP

36 GY28-6661

IEAPCRET
in INITIAL PROGRAM LOADER AND NIP

36 GY28-6661

IEAQABL
in MVT SUPERVISOR

36 GY28-6659

IEAQERA
in MVT SUPERVISOR

36 GY28-6659

IEAQSPET
in MVT SUPERVISOR

36 GY28-6659

IEAQTAQ
in MVT SUPERVISOR
IEAQTDOO (Timer second Level
Interruption Handler)
in TSO CONTROL PROGRAM
IEAQTR02 (Transient Area Refresh
routine)
in TSO CONTROL PROGRAM
TSO use of
when user is removed from
subsystem
when user is restored
IEARELOC
in INITIAL PROGRAM LOADER AND NIP

IEASCSAV
in MVT SUPERVISOR
meaning of

- IECPFNDl

FD table
construction
modification
updating
generalized module functions
invocation
modifying the output record
module residence
output data set records
processing control cards
CREATE
DSD
DUMP

END
FD
REPEAT
reading control cards
scanning control cards
tables used by create module
IEBEDIT
in UTILITIES

32 GY28-6614

IEBGENER
in UTILITIES

32 GY28-6614

36 GY28-6659

36 GY28-7199

IEBISAM
in UTILITIES
intialization of
termination of

32 GY28-6614

36 GY28-7199

36 GY28-6661

I

IEAROUND
in INITIAL PROGRAM LOADER AND NIP

IEALO~

36 GY28-6661
36 GY28-6659

IEASERCH
in INITIAL PROGRAM LOADER AND NIP

36 GY28-6661

IEASTRIO
in INITIAL PROGRAM LOADER AND NIP

36 GY28-6661

IEATCBP
in MVT SUPERVISOR
meaning of

36 GY28-6659

IEATYPE1
in MVT SUPERVISOR
use of during ABTERM processing

36 GY28-6659

IEBPTPCH
in UTILITIES

32 GY28-6614

IEBTCRIN
in UTILITIES

32 GY28-6614

IEBUPDAT
in UTILITIES

32 GY28-6614

IEBUPDTE
in UTILITIES

32 GY28-6614

IECBBFBl
in SEQUENTIAL ACCESS METHODS

30 GY28-6604

IECINT patch area
in INPUT/OUTPUT SUPERVISOR

30 GY28-6616

IECIOLTS
in ONLINE TEST EXECUTIVE PROGRAM
CE/AE routine of
channel routine of
description of
flowcharts for
halt I/O routine of
security of
SIO routine of

37 GY28-6651

IEAUCBFN
in INITIAL PROGRAM LOADER AND NIP

36 GY28-6661

IEAZRLP3
in INITIAL PROGRAM LOADER AND NIP

36 GY28-6661

IECPBLDL
in CATALOG MANAGEMENT
in SEQUENTIAL ACCESS METHODS
BLDLTAB option not used
BLDLTaB option used
in TSO CATAWG MANAGEMENT

IEBOOMPR
in UTILITIES

32 GY28-6614

IECPCNVT
in SEQUENTIAL ACCESS METHODS

30 GY28-6604

IEBCOPY
in UTILITIES

32 GY28-6614

IECPFIND
in SEQUENTIAL ACCESS METHODS

30 GY28-6604

IECPFNDl
in SEQUENTIAL ACCESS METHODS

30 GY28-6604

30 GY28-6606
30 GY28-6604
36 GY28-6745

IEBDG

--rn UTILITIES

clean-up function
FD pattern construction

·32 GY28-6614

111

IECPRLTV -

196

DW5lID4

IECPRLTV
in SEQUENTIAL ACCESS METHODS

30 GY28-6604

IECQBFG1
in SEQUENTIAL ACCESS METHODS

30 GY28-6604

IEDAYA (Attention subroutine of
TCAM), general description of
in TSO CONTROL PROGRAM

36 GY28-7199

IEDAYAA (QTIP Attention)
in TSO CONTROL PROGRAM
flowchart
loaded
module name
operation diagram
summary
IEDAYGP (QTIP TGET/TPUT)
in TSO CONTROL PROGRAM
flowchart
loaded
module name
operation diagram
summary
IEDAYH (Hang Up subroutine of TCAM),
general description of
in TSO CONTROL PROGRAM
IEDAYHH (QTIP Hang Up)
in TSO CONTROL PROGRAM
flowchart
loaded
module name
operation diagram
summary
IEDAYI (TSINPUT subroutine of TCAM),
- general description of
in TSO CONTROL PROGRAM
IEDAYII (QTIP TSINPUT)
in TSO CONTROL PROGRAM
flowchart
loaded
module name
operation diagram
summary
IEDAYL (Logon subroutine of TCAM)
in TSO CONTROL PROGRAM
general description of
locating a TJB at logon
IEDAYLL (QTIP Logon)
in TSO CONTROL PROGRAM
flowchart
loaded
module name
operation diagram
summary
IEDAYO (TSOUTPUT subroutine of TCAM)
---rn-TSO CONTROL PROGRAM
general description of
processing of logoff or hang
up
IEDAYOO (QTIP TSOUTPUT)
in TSO CONTROL PROGRAM
flowchart
loaded
module name
operation diagram
summary

IEDAYZZ (QTIP Scheduler and
Simulated Attention)
in TSO CONTROL PROGRAM
flowchart
loaded
module name
operation diagraro
summary

36 GY28-7199

IEEBASEA, in IKJEFF5l
in TSO COMAND PROC VOL2-CNCL/STATus36 GY28-6772
36 GY28-7199

36 GY28-7l99

IEEBSA
---rn-PL/I SUBROUTINE LIBRARY

29 GY28-6801

IEESD569
in INITIAL PROGRAM LOADER AND NIP

36 GY28-6661

I EEVDUS 1
in TSO COMMAND PROC VOL5-0PERATOR
in directory
operation
IEEVGPSD
in TSO COMMAND PROC VOL5-0PERATOR
in directory
operation of

36 GY28-7l99
36 GY28-7l99

36 GY28-7l99
36 GY28-7l99

36 GY28-7l99

36 GY28-7l99

36 GY28-6775

36 GY28-6775

IEEVIPL
in INITIAL PROGRAM LOADER AND NIP

36 GY28-6661

IEEVLIN routine
in MVT SUPERVISOR

36 GY28-6659

IEEVLOPN routine
in MVT SUPERVISOR

36 GY28-6659

IEEVSDIO (Broadcast Data Set I/O Processing
module)
in TSO COMMAND PROC VOL1-BROADCAST 36 GY28-6771
basic functions
data areas used
I/O buffers for
obtaining pOinter to MAl L
directory
opening SYS1.BRODCAST
parameter list for
register activity
setting return codes
IEEVSDIO (I/O module)
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
description
flowcharts
operation
IEEVSEND
in TSO COMMAND PROC VOL5-0PERATOR
in directory
operation of
IEEVSND2
in TSO COMMAND PROC VOL5-0PERATOR
in routine directory
operation

36 GY28-6775

36 GY28-6775

36 GY28-7l99
IEEVSND3
in TSO COMMAND PROC VOL5-0PERATOR
in directory
operation

36 GY28-6775

36 GY28-7l99
IEEVSND4
in TSO COMMAND PROC VOL5-0PERATOR
in directory
operation

36 GY28-6775

197
IEEVSND5
in TSO COMMAND PROC VOL5-0PERATOR
in directory
operation
IEEVSND8
in TSO COMMAND PROC VOL5-0PERATOR
in directory
operation
IEE.'VSND9
in TSO COMMAND PROC VOL5-oPERATOR
in directory
operation

36 GY28-6775

36 GY28-6775

IEFDELg
in S/360 JOB PROCESSING 1130/2250
IEFHANDL subroutine of IKAPSMBO
in GRAPHIC JOB PROCESSOR SUPPORT
in S/360 JOB PROCESSING 1130/2250

service routines
abnormal end appendage
alternate track
data
end-of-extent appendage
message builder
message writer
password protection
scan
IEHINITT
in UTILITIES

36 GY28-6659

IEHIOSUP
in UTILITIES
32 GY28-6614
IEHIOSUP utility program
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607

36 GY27-7166
36 GY27-7159
36 GY27-7166

IEFLOCDQ
in CRJE PLM
36 GY30-2011
in TSO COMAND PROC VOL2-CNCL/S~TUS36 GY28-6772
entry points
in IKJEFF52
in operation
36 GY28-6775
in TSO COMMAND PROC VOL5-0UTPUT
in IKJEFF60
in IKJEFF61
in operation

32 GY28-6614

IEHMOVE
in UTILITIES

32 GY28-6614

IEFQMDQQ
in S/360 JOB PROCESSING 1130/2250
IEFQMDQ2
in GRAPHIC JOB PROCESSOR SUPPORT
IEFQMNQQ
in GRAPHIC JOB PROCESSOR SUPPORT
in S/360 JOB PROCESSING 1130/2250

32 GY28-6614

IEHPROGM
in CATALOG MANAGEMENT
in TSO CATALOG MANAGEMENT
in UTILITIES
IEHPROGM utility pprogram
in INTRO. TO CONTROL PROGRAM LOGIC

36 GY28-6605

IEKAAA
--rilFORTRAN IV (H) COMPILER

25 GY28-6642

IEKAAD

IEFQDELQ
in GRAPHIC JOB PROCESSOR SUPPORT
in TSO COMMAND PROC VOL5-OUTPUT
in IKJEFF61
in IKJEFF62
in operation

32 GY28-6614

IEHLIST
in UTILI TIES
IEHLIST Overlay structure
in UTILITIES

~FORrRAN IV

IEF~AGST

1n TSO COMMAND PROC VOL5-0UTPUT
in IKJEFF61
in operation

XEI0550X
in INPUT/OUTPUT SUPPORT
IGG0550Y
in INPUT/OUTPUT SUPPORT
IGG0550Z
in INPUT/OUTPUT SUPPORT
IGG0551A
in SEQUENTIAL ACCESS METHODS
IGG0551B
in SEQUENTIAL ACCESS METHODS
IGG0552A
in INPUT/OUTPUT SUPPORT
IGG0552B
in INPUT/OUTPUT SUPPORT
IGG0552C
in INPUT/OUTPUT SUPPORT
IGG0552D
in INPUT/OUTPUT SUPPORT
IGG0552E
in INPUT/OUTPUT SUPPORT
IGG0552F
in INPUT/OUTPUT SUPPORT
IGG0552H
in INPUT/OUTPUT SUPPORT
IGG0552I
in INPUT/OUTPUT SUPPORT
IGG0552J
in INPUT/OUTPUT SUPPORT
IGG0552K
·in INPUT/OUTPUT SUPPORT
IGG0552L

XGGOSSOM - XGG08102

in INPUT/OUTPUT SUPPORT

30 GY28-6609

IGG0552M
in INPUT/OUTPUT SUPPORT

30 GY28-6609

IGG0552N
in INPUT/OUTPUT SUPPORT

30 GY28-6609

IGG05520
in INPUT/OUTPUT SUPPORT

30 GY28-6609

IGG0552P
in INPUT/OUTPUT SUPPORT

30 GY28-6609

IGG0552Q
in INPUT/OUTPUT SUPPORT

30 GY28-6609

IGG0552R
in INPUT/OUTPUT SUPPORT

30 GY28-6609

IGG0552V (EMODVOL1)
in INPUT/OUTPUT SUPPORT

30 GY28-6609

IGG0552W (SECLOADA)
in INPUT/OUTPUT SUPPORT

30 GY28-6609

IGG0552X
in INPUT/OUTPUT SUPPORT

30 GY28-6609

IGG0552Z
in INPUT/OUTPUT SUPPORT

30 GY28-6609

30 GY28-6609
30 GY28-6609
30 GY28-6609
30 GY28-6609
30 GY28-6609
30 GY28-6609
30 GY28-6609
30 GY28-6609
30 GY28-6609
30 GY28-6609
30 GY28-6609
IGG0553A
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
30 GY28-6609
IGG0553B
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
30 GY28-6609
IGG0553C
inDIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
30 GY28-6604
IGG0553D
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
30 GY28-6604
IGG0553E
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
30 GY28-6609
IGG0559D
in INPUT/OUTPUT SUPPORT

30 GY28-6609

IGG0559E
in INPUT/OUTPUT SUPPORT

30 GY28-6609

IGG0559F
in INPUT/OUTPUT SUPPORT

30 GY28-6609

IGG0559G
in INPUT/OUTPUT SUPPORT

30 GY28-6609

IGG0559I
in INPUT/OUTPUT SUPPORT

30 GY28-6609

IGG0559J
in INPUT/OUTPUT SUPPORT

30 GY28-6609

IGG0559P
in INPUT/OUTPUT SUPPORT

30 GY28-6609

IGG0559Q
in INPUT/OUTPUT SUPPORT

30 GY28-6609

IGG08101
in SEQUENTIAL ACCESS METHODS

30 GY28-6604

IGG08102
in SEQUENTIAL ACCESS METHODS

30 GY28-6604

30 GY28-6609
30 GY28-6609
30 GY28-6609
30 GY28-6609
30 GY28-6609
30 GY28-6609
30 GY28-6609
30 GY28-6609
30 GY28-6609

•

1:0008103 -

214

1:BCADJST

IGG08103
in SEQUENTIAL ACCESS METHODS

30 GY28-6604

IGG08104
in SEQUENTIAL ACCESS METHODS

30 GY28-6604

IGG09301 (TPUT Without TJID)
in TSO CONTROL PROGRAM
flowchart
module name
operation diagram
summary
IGG09302 (TPUT with TJID)
in TSO CONTROL PROGRAM
flowchart
module name
operation diagram
summary
IGG09303 (TGET-Second Load)
in TSO CONTROL PROGRAM
flowchart
module name
operation diagram
summary
IGG0940A (STSIZE - specify terminal
size)
in TSO CONTROL PROGRAM
flowchart
module name
operation diagram
summary
IGG0940B (GTSIZE - get terminal
size)
in TSO CONTROL PROGRAM
flowchart
module name
operation diagram
summary
IGG0940C (STAUTOCP - start automatic
character prompting)
in TSO CONTROL PROGRAM
flowchart
module name
operation diagram
summary
IGG0940D (SPAUTOPT - stop automatic
prompting)
in TSO CONTROL PROGRAM
flowchart
module name
operation diagram
summary
IGG0940E (RTAUTOPT - restart
automatic prompting)
in TSO CONTROL PROGRAM
flowchart
module name
operation diagram
summary
IGG0940F (TSABEND - TSO abnormal
termina tion)
in TSO CONTROL PROGRAM
flowchart
module name
operation diagram
summary
IGG0940G (STCLEAR - specify terminal

36 GY28-7199

clear characters)
in TSO CONTROL PROGRAM
flowchart
module name
operation diagram
summary
IGG09400 (TCABEND - TCAM abnormal
termination)
in TSO CONTROL PROGRAM
flowchart
module name
operation diagram
summary

36

GY~8-7199

36 GY28-7199

36 GY28-7199

36 GY28-7199

IGG09404 (STBREAK - specify terminal
reverse break feature)
in TSO CONTROL PROGRAM
flowchart
module name
operation diagram
summary

36 GY28-7199

IGG09405 (STeOM - specify
inter-terminal communications)
in TSO CONTROL PROGRAM
flowchart
module name
operation diagram
summary

36 GY28-7199

IGG09406 (STTIMEOU - specify timeout
feature)
in TSO CONTROL PROGRAM
flowchart
module name
operation diagram
summary

36 GY28-7199

IGG09407 (STCC - specify terminal
control characters)
in TSO CONTROL PROGRAM
flowchart
module name
operation diagram
summary

36 GY28-7199

IGG09408 (STATTN - specify terminal
attention condition)
in TSO CONTROL PROGRAM
flowchart
module name
operation diagram
summary

36 GY28-7199

IGG09409 (STAUTOLN - start automatic
line numbering)
in TSO CONTROL PROGRAM
flowchart
module name
operation diagram
summary
IGLASTEL
in COBOL-TO-PL/l LCP

36 GY28-7199

IGNORE (keyword option)
in PL/I SYNTAX CHECKER PLM
in record I/O statements
Ignore-unit-exception flag (SBEXIUE)
in 7074 EMULATE FOR M/165
I HCADJST
in FORTRAN IV (G) COMPILER
in FORTRAN IV (H) COMPILER

36 GY28-7199

36 GY28-7199

36 GY28-7199

36 GY28-7199

36 GY28-7199

36 GY28-7199

29 GY33-7007
29 GY33- 8009
GY27-7228

25 GY28-6638
25 GY28-6642

215
IHCCGOTO library subprogram
in FORTRAN IV (E)

25 GY28-6601

IHCDBUG
in FORTRAN IV (G) COMPILER

25 GY28-6638

IHCDIOSE
in FORTRAN IV (G) COMPILER
25 GY28-6638
in FORTRAN IV (H) COMPILER
25 GY28-6642
IHCDIOSE library subprogram
in FORTRAN IV (E)
25 GY28-6601
buffering scheme of
communication with control program
file definition section of
file initialization section of
functions of
I/O error processing of
overall logic of
read section of
table and blocks used in
termination section
write section
IHCECOMH
in FORTRAN IV (G) COMPILER
in FORTRAN IV (H) COMPILER

25 GY28-6638
25 GY28-6642

IHCEDIOS
in FORTRAN IV (G) COMPILER
in FORTRAN IV (H) COMPILER

25 GY28-6638
25 GY28-6642

IHCEFIOS
in FORTRAN IV (G) COMPILER
in FORTRAN IV (H) COMPILER

25 GY28-6638
25 GY28-6642

IHCEFNTH
in FORTRAN IV (G) COMPILER
in FORTRAN IV (H) COMPILER

25 GY28-6638
25 GY28-6642

IHCERRM
in FORTRAN IV (G) COMPILER
in FORTRAN IV (H) COMPILER
IHCETRCH
in FORTRAN IV (G) COMPILER
in FORTRAN IV (H) COMPILER

25 GY28-6638
25 GY28-6642
25 GY28-6638
25 GY28-6642

IHCFCOME library subprogram
in FORTRAN IV (E)
25 GY28-6601
closing section of
format scan of
functions of
generation of calling sequences to
I/O device manipulation routines of
I/O list section of
opening section of
overall logic of
read/write routines of
utility routines of
write-to-operator routines of
IHCFCOMH/IHCECOMH
l.n FORTRAN IV (G) COMPILER
flowchart
initialization operations
input/output operations
termination operations
transfer and subroutine table
in FORTRAN IV (H) COMPILER
flowchart
with FORMAT statements
initialization operations
input/output operations
with NAMELIST statements
termination operations
transfer and subroutine table

25 GY28-6638

25 GY28-6642

IBCCGoro - IHCUATBL

I HCFCVTH
in FORTRAN IV (G) COMPILER
in FORTRAN IV (H) COMPILER

25 GY28-6638
25 GY28-6642

IHCFDUMP
in FORTRAN IV (G) COMPILER
in FORTRAN IV (H) COMPILER

25 GY28-6638
25 GY28-6642

IHCFDVCH
in FORTRAN IV (G) COMPILER
in FORTRAN IV (H) COMPILER

25 GY28-6638
25 GY28-6642

IHCFEXIT
in FORTRAN IV (G) COMPILER
in FORTRAN IV (H) COMPILER

25 GY28-6638
25 GY28-6642

HICFINTH
in FORTRAN IV (G) COMPILER
in FORTRAN IV (H) COMPILER

25 GY28-6638
25 GY28-6642

IHCFIOSH
in FORTRAN IV (G) COMPILER
25 GY28-6638
in FORTRAN IV (H) COMPILER
25 GY28-6642
IHCFIOSH library subprogram
in FORTRAN IV (E)
25 GY28-6601
buffering scheme of
closing section of
communication with control program
device manipulation section of
functions of
initialization section of
I/O error processing of
overall logic of
processing for the 1403 printer
read section of
table and blocks used in
wri te section of
IHCFOPT
in FORTRAN IV (G) COMPILER
in FORTRAN IV (H) COMPILER

25 GY28-6638
25 GY28-6642

IHCFOVER
in FORTRAN IV (G) COMPILER
in FORTRAN IV (H) COMPILER

25 GY28-6638
25 GY28-6642

IHCFSLIT
in FORTRAN IV (G) COMPILER
in FORTRAN IV (H) COMPILER

25 GY28-6638
25 GY28- 6642

IHCIBERH
in FORTRAN IV (G) COMPILER
in FORTRAN IV (H) COMPILER

25 GY28-6638
25 GY28-6642

IHCIBERR library subprogram
in FORTRAN IV (E)
25 GY28-6601
functions of
generation of calling sequences to
overall logic of
IHCNAMEL
in FORTRAN IV (G) COMPILER
in FORTRAN IV (H) COMPILER

25 GY28-6638
25 GY28-6642

IHCSTAE
in FORTRAN IV (G) COMPILER
in FORTRAN IV (H) COMPILER

25 GY28-6638
25 GY28-6642

IHCTRCH
in FORTRAN IV (G) COMPILER
in FORTRAN IV (H) COMPILER

25 GY28-6638
25 GY28- 6642

I HCUATBL
in FORTRAN IV (S) COMPILER
in FORTRAN IV (H) COMPILER

25 GY28-6638
25 GY28-6642

II]

lBCOOPT -

216

DlBDXD

IHCUOPT
in FORTRAN IV (G) COMPILER
in FORTRAN IV (H) COMPILER
IHDFSORT
in COBOL (F)

25 GY21l-6638
25 GY28-6642

lHEABU
in PL/I SUBROUTINE LIBRARY
IHEABV
in PLII SUBROUTINE LIBRARY
IHEABW
in PLII SUBROUTINE LIBRARY
IHEABZ
in PL/I SUBROUTINE LIBRARY
lHEADD
-rDPLlI SUBROUTINE LIBRARY
IHEADV
---rDPL/I SUBROUTINE LIBRARY
IHEAPD
~PL/I SUBROUTINE LIBRARY
lHEATL
in PL/I SUBROUTINE LIBRARY
IHEATS
-rDPLlI SUBROUTINE LIBRARY
IHEATW
in PL/I SUBROUTINE LIBRARY
lHEATZ
-rDPLlI SUBROUTINE LIBRARY
IHEBEG
in PL/I SUBROUTINE LIBRARY
IHEBSC
---rDPL/I SUBROUTINE LIBRARY
IHEBSD
in PL/I SUBROUTINE LIBRARY
IHEBSF
--rDPLlI SUBROUTINE LIBRARY
IHEBSI
in PL/I SUBROUTINE LIBRARY
IHEBSK
in PL/I SUBROUTINE LIBRARY
IHEBSM
-rDPLlI SUBROUTINE LIBRARY
IHEBSN
in PL/I SUBROUTINE LIBRARY
lHEBSO
in PLII SUBROUTINE LIBRARY
IHEBSS
-rDPL/I SUBROUTINE LIBRARY
IHEBST
in PL/I SUBROUTINE LIBRARY

29 GY28-6801

IHECFA
---rDPL/I SUBROUTINE LIBRARY

29 GY28-6801

IHECFB
in PL/I SUBROUTINE LIBRARY

29 GY28-6801

IHECFC
in PL/I SUBROUTINE LIBRARY

29 GY28-6801

24 GY28-6382

IHEABN

~PL/I SUBROUTINE LIBRARY

lHEBSV
in PL/I SUBROUTINE LIBRARY

29 GY28-6801
29 GY28-6801
29 GY28-6801
29 GY28-6801
29 GY28-6801
29 GY28-6801
29 GY28-6801
29 GY28-6801
29 GY28-6801
29 GY2B-6801
29 GY2B-6801
29 GY2B-6B01
29 GY2B-6B01
29 GY2B-6801
29 GY2B-6B01
29 GY28-6B01
29 GY28-6B01
29 GY28-6B01
29 GY2B-6B01
29 GY2B-6B01
29 GY2B-6801
29 GY2B-6B01

29 GY28-6B01

IHECKP
-rDPL/I SUBROUTINE LIBRARY
IHECKP
in PL/I SUBROUTINE LIBRARY

29 GY28-6801
29 GY28-6801

IHECLT
-rDPL/I SUBROUTINE LIBRARY

29 GY28-6801

IHECNT
in PL/I SUBROUTINE LIBRARY

29 GY28-6801

IHECSC
-rDPL/I SUBROUTINE LIBRARY

29 GY28-6801

IliECSI
---rDPL/I SUBROUTINE LIBRARY

29 GY28-6801

IHECSK
in PL/I SUBROUTINE LIBRARY

29 GY28-6B01

II:{ECSM
in PL/I SUBROUTINE LIBRARY

29 GY28-6B01

IHECSS
-rDPL/I SUBROUTINE LIBRARY

29 GY28-6B01

IHECST
in PL/I SUBROUTINE LIBRARY

29 GY2B-6B01

IHECSV
---rDPL/I SUBROUTINE LIBRARY

29 GY28-6B01

IHECTT
in PL/I SUBROUTINE LIBRARY

29 GY2B-6B01

IHEDBN
in PL/I SUBROUTINE LIBRARY

29 GY28-6B01

IHEDCN
in PL/I SUBROUTINE LIBRARY

29 GY2B-6B01

IHEDDI
-rDPL/I SUBROUTINE LIBRARY

29 GY2B-6B01

IHEDDJ
in PL/I SUBROUTINE LIBRARY

29 GY28-6B01

IHEDDO

~PL/I SUBROUTINE LIBRARY

29 GY2B-6801

IHEDDP
in PL/I SUBROUTINE LIBRARY

29 GY2B-6B01

IHEDDT
in PL/I SUBROUTINE LIBRARY

29 GY2B-6B01

lHEDIA
in PL/I SUBROUTINE LIBRARY

29 GY2B-6B01

IHEDIB
in PL/I SUBROUTINE LIBRARY

29 GY2B-6B01

IHEDID
in PL/I SUBROUTINE LIBRARY

29 GY2B-6B01

217
IHEDIE
in PLII SUBROUTINE LIBRARY
IHEDIL
--ril""""PLlI SUBROUTINE LIBRARY
IHl!;DIM
---rilPL/I SUBROUTINE LIBRARY
IHEDMA
--rDPLlI SUBROUTINE LIBRARY
IHEDNB
---rilPL/I SUBROUTINE LIBRARY
IHEDNC
---rrlPL/I SUBROUTINE LIBRARY
IHEDOA
in PL/I SUBROUTINE LIBRARY
IHEDOB
in PL/I SUBROUTINE LIBRARY
IBE-DOD
---rrlPLlI SUBROUTINE LIBRARY
IHEDOE
in PL/I SUBROUTINE LIBRARY
IHEDOM
in PL/I SUBROUTINE LIBRARY
IHEDSP
---rilPL/I SUBROUTINE LIBRARY
IHEDUM
in PL/I SUBROUTINE LIBRARY
IBEDVU
--ril""""PLlI SUBROUTINE LIBRARY
IHEDVV
in PL/I SUBROUTINE LIBRARY
IBEDZW
---rrlPL/I SUBROUTINE LIBRARY
IHEDZZ
in PL/I SUBROUTINE LIBRARY
IBEEFL
--ril""""PLlI SUBROUTINE LIBRARY
IHEEFS
--ril""""PL/I SUBROUTINE LIBRARY
IHEERD
in PLII SUBROUTINE LIBRARY
IHEERE
---rDPLlI SUBROUTINE LIBRARY
IHEERJ:
--rDPLlI SUBROUTINE LIBRARY
IHEERN
--rDPL/I SUBROUTINE LIBRARY
IHEERO
in PLII SUBROUTINE LIBRARY
IHEERP
in PLII SUBROUTINE LIBRARY
IHEERR

IBEDIE - lHEI'l'D

in PL/I SUBROUTINE LIBRARY

29 GY28-6801

IliEERS
--rrlPL/I SUBROU'l'INE LIBRARY

29 GY28-6801

IHEERT
--rrlPL/I SUBROUTINE LIBRllliY

29 GY28-6801

IrlEESM
--rnPL/I SUBROUTINE LIBRARY

29 GY28-6801

IHEESS
--rrlPL/I SUBROUTINE LIBRARY

29 GY28-6801

IHEEXL
-----rnPL/I SUBROUTINE LIBRARY

29 GY28-6801

IHEl!:XS
--rDPL/I SUBROUTINE LIBRARY

29 GY28-6801

IHEEXW
--rnPL/I SUBROUTINE LIBRARY

29 GY:l8-6801

IHEEXZ
--rDPL/I SUBROUTINE LIBRARY

29 GY28-6801

IHEHTL
--rDPL/I SUBROUTINE LIBRARY

29 GY28-6801

IHEHTS
--ril""""PL/I SUBROUTINE LIBRARY

29 GY28-6801

IHEIBT
---rrlPL/I SUBROUTINE LIBRARY

29 GY28-6801

IBEIGT
---rilPL/I SUBROUTINE LIBRARY

29 GY28-6801

IHEINT
--ril""""PL/I SUBROUTINE LIBRARY

29 GY28-6801

IHEIOA
---rilPL/I SUBROUTINE LIBRARY

29 GY28-6801

IHEIOB
--rDPL/I SUBROUTINE LIBRARY

29 GY28-6801

IHEIOC
--ril""""PL/I SUBROUTINE LIBl
in 7074 EMULATE FOR M/165
GY27-7228
Input routine (IOPOSTIN)
in EMULATOR FOR 7090/7094/7094I1
35 GY27-7187
Input routine (IOPRIN1)
in EMULATOR FOR 7090/7094/7094I1
35 GY27-7187
description
flowchart
Input sequence number insertion
routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
Input stack
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY28-6772
in TSO COMMAND PROC VOL5-LISTCAT
36 GY28-6775
flushing
in TSO COMMAND PROC VOL6-WHEN/END 36 GY28-6776
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
definition
deleting of
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
adding and removing a terminal element
by Initialization
by Mainline
Input stack, flushing of
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
Input stack (continued)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
removing elements from
flushing the stack
at an Attention interruption (Table
22, function 2C)
at an error return to the TMP
indications in test communication table
(TSTFLGS4)
Input Stack (INSTACK)
in TSO TMP & SERVICE ROUTINES
36 GY28-6770
description
format
use
Input stacks, clearing of
in TSO COMMAND PROCESSOR VOL1-ACCT 36 GY28-6771
Input standard labeled tape
positioning
in INPUT/OUTPUT SUPPORT
30 GY28-6609
Input stream
in MVT JOB MANAGEMENT
36 GY28-6660
access method for

249
Input stream
I in MVT JOB MANAGEMENT
36 GY28-6660
L--------------------------------------(continued)
address of
commands for
composition of
data in
DCB for
opening of
procedures in
processor
reading of
Input stream. definition of
in JOB MANAGEMENT
36 GY28-6613
INPUT subcommand
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
summary of operations
syntax
INPUT subcommand processor
in CRJE PLM
36 GY30-2011
entry point code
flowchart
messages requested
microfiche directory
module description
register usage
Input text
in PL/I (F) COMPILER
29 GY28-6800
end-of-file indication
Input text buffer (TXTBFBEG)
in LINKAGE EDITOR (F)
31 GY28-6667
general description of use
in single pass processing
in text processing
minimum length
Input to ALLOCATE
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY28-6772
Input to CHANGE
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
'Input to many GSP subroutines
in GRAPHIC SUBRTN. PACKAGE
25 GY27-7152
Input to MCHl85 Resident Nucleus
in MACHINE-CHECK HANDLER. S360 M85 31 GY27-7184
Input to PORs
in GRAPHICS PROBLEM ORILNTED RTNS. 30 GY27-7110
Input to processor
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
Input to program
in UTILITIES
32 GY28-6614
IEBCOMPR
IEBGENER
IEBPTPCH
Input to PROTECT command processor
in TSO COMMAND PROC VOL6-PROTECT
36 GY28-6776
Input to the routines
in CATALOG MANAGEMENT
30 GY28-6606
in TSO CATALOG MANAGEMENT
36 GY28-6745
INPUTBEG
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
in DATAAREA DSECT
pointer to start of input
Inputs
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
to LISTDS
INPUTTAB (input table)
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
in IKM11
LEVELTAB DSECT field
valid PL/I characters in
INPUT 1
in TSO COMMAND PROC VOL6-TERMINAL 36 GY28-6776
field name in PDL
INPUT 2
in TSO COMMAND PROC VOL6-TERMINAL 36 GY28-6776
field name in PDL

Input - Insertion
INP270
---rn-LINKAGE EDITOR (F)

31 GY28-6667

INP3
----in TSO COMMAND PROC VOL6-TERMINAL
field name in PDL

36 GY28-6776

INREAD. in history
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

INSCOR switch
---rn-ONLINE T~ST EXECUTIVE PROGRAM

37 GY28-6651

INSERT
---rn-COBOL-TO-PL/1 LCP
29
Insert a cursor
25
in GRAPHIC SUBRTN. PACKAGE
Insert at offset routine
in TELECOMMUNICATION ACCESS METHOD 30
cross reference table
flowchart
library
microfiche directory
module description
register usage
Insert block
in QUEUED TELECOMM. ACCESS METHOD 30
description of
format of
Insert BRDCST message text routine
in REMOTE JOB ENTRY
36
Insert data routine
in TELECOMMUNICATION ACCESS METHOD 30
cross reference table
flowchart
library
microfiche directory
module description
register usage
INSERT macro
in CRJE PLM
36
INSERT option on the RECALL frame
in GRAPHIC JOB PROCESSOR SUPPORT
36
in S/360 JOB PROCESSING 1130/2250 36
Insert/Replace/Delete in TSO COMMAND PROCESSOR VOL3-EDIT 36
Insert/replace/delete processor
in CRJE PLM
36
entry point code
flowchart
messages requested
microfiche directory
module description
register usage
INSERT routine
in COBOL (F)
24
INSERT statement
in LINKAGE EDITOR (F)
31
general description of processing
operation diagram
processor
INSERT subcommand
in TSO COMMAND PROCESSOR VOL3-EDIT 36
summary of operations
INSERT subcommand (continued)
in TSO COMMAND PROCESSOR VOL3-EDIT 36
syntax
Insert table
in FORTRAN IV-TO-PL/1 LCP
29
Inserted statements
in TSO COMMAND PROC VOL6-SUBMIT
36
Insertion file
in PL/I (F) COMPILER
29
Insertion in error message
in PL/I SYNTAX CHECKER PLM
29
INSERT1. INSERT2.

GY33-7007
GY27-7152
GY30-2029

GY30-2002

GY30-2005
GY30-2029

GY30-2011
GY27-7159
GY27-7166
GY28-6773
GY30-2011

GY28-6382
GY28-6667

GY28-6773
GY28-6773
GY33-7000
GY28-6776
GY28-6800
GY33-8009

.:I

250

Insertion - Intensified
Insertion in error message
I in PL/I SYNTAX CHECKER PLM
29 GY33-8009
L--------------------------------------(continued)
INTDSECT (IKM134)
Insertion text
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
definition
use of
INSFLG, field in CFLAGS
---rn-TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
Insignificant blanks. removed fron input
text
in PL/I (F) COMPILER
29 GY28-6800
INSRCBLD. label
in TSO COMMAND PROCESSOR VOL6-RUN
in method of operation diagram
INSRCDES. List Source Descriptor
in TSO COMMAND PROCESSOR VOL6-RUN
format of
in method of operation diagram
INSTACK
in TSO TMP & SERVICE ROUTINES

36 GY28-6776

36 GY28-6776

36 GY28-6770

Installation exit
in CRJE PLM
36
Installation exit (IKJEFF53)
in TSO COMAND PROC VOL2-CNCL/STATUS36
description
operation
Installation exit interface routine
(IKJEFF09)
in TSO COMMAND PROC VOL6-SUBMIT
36
Installation Exit routine
in TSO COMMAND PROC VOL5-0UTPUT
36
description
in IKJEFF60
PARAMETERS FOR
Installation exit routine (IKJEFF10)
in TSO COMMAND PROC VOL6-SUBMIT
36

GY30-2011
GY28-6772

modules (IGFASR2C/3C)
theory
Instruction Retry possibilities
in MACHINE-CHECK HANDLER. S360 M65
Instruction retryability
in MACHINE-CHECK HANDLER. S360 M65
Instruction set requirements
in PL/I SUBROUTINE LIBRARY
Instruction simulation (emulation)
in EMULATOR FOR 7090/7094/709411
CPU
I-cycle
I/O
routines
special feature
Instruction Simulation routines
(IITIN)
in EMULATOR FOR 7090/7094/709411
Instruction-step
in EMULATOR FOR 7090/7094/709411
Instruction-step command routine
UITISP)
in EMULATOR FOR 7090/7094/709411
Instructions, compatibility feature
in EMULATOR FOR 7090/7094/709411
CPU emulation
I/O emulation

31 GY27-7155
31 GY27-7155
29 GY28-6801
35 GY27-7187

35 GY27-7187
35 GY27-7187
35 GY27-7187
35 GY27-7187

Insturction retry
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
INSTYP
---rn-COBOL (E)

24 GY24-5009

INTACC Routine
in COBOL (F)

24 GY28-6382

GY28-6776
INTCL

GY28-6775

GY28-6776

Instruction
in MACHINE-CHECK HANDLER. M135/145 30 GY27-7237
processing damage
retry
unretryable
Instruction, displaced
in TESTRAN
37 GY28-6611
Instruction, inserted SVC
in TESTRAN
37 GY28-6611
Instruction, unretryable
in MACHINE-CHECK HANDLER. M155/165 30 GY27-7198
Instruction building area format (Phase F8)
in ASSEMBLER (F)
21 GY26-3700
Instruction codes (internal assembler)
in ASSEMBLER (F)
21 GY26-3700
Instruction edit routine
in TESTRAN
37 GY28-6611
Instruction generation
in FORTRAN IV (E)
25 GY28-6601
Instruction names
in SORT/MERGE
33 GY28-6597
Instruction processing damage
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
Instruction retry
in MACHINE-CHECK HANDLER, S360 M85 31 GY27-7184
Instruction Retry Analysis
in MACHINE-CHECK HANDLER. S360 M65 31 GY27-7155
modules (IGFASROC/1C)
theory
Instruction Retry Execution
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155

---rn

S/360 JOB PROCESSING 1130/2250

INTEGER
in ALGOL-TO-PL/l LCP
in FORTRAN IV-TO-PL/l LCP
Integer, command operand
in TSO COMMAND PROC VOL6-WHEN/END
Integer, length of
in TSO COMMAND PROCESSOR VOLl-CHNG
Integer constants
in FORTRAN IV (E)
assi~nment of relative addresses
dict~onary chain for
in PL/I SYNTAX CHECKER PLM
code assignment
Integer constants. elimination of
in FORTRAN IV (H) COMPILER
Integer data
in GRAPHIC SUBRTN. PACKAGE
Integer division
in FORTRAN IV-TO-PL/l LCP
INTEGER statement
in FORTRAN IV (E)
compile-time processing of
Integral values 'linkage'
in PL/I SUBROUTINE LIBRARY

36 GY27-7166
29 GY33-7006
29 GY33-7000
36 GY28-6776
36 GY28-6771
25 GY28-6601
to
29 GY33-8009
25 GY28-6642
25 GY27-7152
29 GY33-7000
25 GY28-6601

29 GY28-6801

Integrated emulator
in 7074 EMUIATE FOR W165
comparison with stand alone
definition

GY27-7228

Integrity of VTOC
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
Intensified Attention Correlation Table
(INTACT)

251
Intensified Attention Correlation Table
I (IN'l'ACT)
L--------------------------------------(continued)
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
format of
location in Graphic Work Area
use of
Inter-modular dependency
in PLiI SUBROUTINE LIBRARY
Inter-phase dumping
in PL/I (F) COMPILER

29 GY28-6801
29 GY28-6800

Intercept error
in MACHINE-CHECK HANDLER, S360 M85 31 GY27-7184
Intercept mode
in 7074 EMULATE FOR M/165
GY27-7228
flag SBEXIMO
input errors
out put errors
Intercept processing
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
Intercept routine
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
chart
Interface
in ONLINE TEST EXECUTIVE PROGRAM
37
between OLTS and OS
OLTEP as
RETAIN/370
the transient manager as
in PL/I (F) COMPILER
29
with data sets
with operating system
in TSO COMMAND PROCESSOR VOL4-HELP 36
with a command processor
with dynamic allocation and
unallocation
with the TMP
Interface, BSAM
37
in TESTRAN
Interface, I/O
37
in TESTRAN
Interface, system
29
in PL/I SYNTAX CHECKER PLM
debugging hints for
with CRJE
Interface module
in FORTRAN IV (E)
25
components of
functions of
I/O buffers in
linkages to
loaded into main storage
returns from
Interface module routines
in FORTRAN IV (E)
25
Interface modules, record I/O
in PLiI SUBROUTINE LIBRARY
29
Interface parameter list, BROADCAST data
set
in TSO COMMAND PROCESSOR VOL1-ACCT 36
Interface resolution routine
(IKDGTIRB)
in S/360-1130 DATA TMN. - FORTRAN 25
description of
scheduling of
starting the next operation
Interface routine
in TSO COMMAND PROCESSOR VOL1-CHNG 36
in TSO COMMAND PROCESSOR VOL3-EDIT 36
error and exceptional conditions
method of operation diagram
Interface routine, NIP
in INITIAL PROGRAM LOADER AND NIP 36

Intensified - Intermediate

Interface to system catalog
in TSO COMMAND PROC VOL2-DELETE
36
Interface with CCH
in MACHINE-CHECK HANDLER, M135/145 30
Interfaces
in TSO COMMAND PROCESSOR VOL1-CHNG 36
in TSO COMMAND PROCESSOR VOL4-EXEC 36
between EXEC and system
between TSO components
in 7074 EMULATE FOR M/165
compatibility feature and emulator
program
data management
emulator and operating system
flowcharts
Interfaces, with operating system
in TSO COMMAND PROC VOL1-DELETE
36
Interfaces with system
in TSO COMMAND PROCESSOR VOL6-TIME 36

GY28-6772
GY27-7237
GY28-6771
GY28-6774
GY27-7228

GY28-6771
GY28-6776

Interfacing with the appendage routines
in IBM 1419/1275 DEVICE DEP. BSAM 30 GY21-0012
Interfacing with the error recovery
procedure
in IBM 1419/1275 DEVICE DEP. BSAM 30 GY21-0012

GY28-6651

Interference in work area between
in PL/I SYNTAX CHECKER PLM
source input and token string

GY28-6800

Interim LPS queue
in QUEUED TELECOMM. ACCESS METHOD
Interim LPS routine
in QUEUED TELECOMM. ACCESS METHOD
chart

29 GY33-8009

30 GY30-2002
30 GY30-2002

GY28-6774
Interleaved arrays
in PL/I SUBROUTINE LIBRARY

29 GY28-6801

Interlocking condition
in EMULATOR FOR 7090/7094/709411

35 GY27-7187

Interlocks, system
in CONTROL PROGRAM WITH MFT

36 GY27-7128

GY28-6611
GY28-6611
GY33-8009

GY28-6601

GY28-6601
GY28-6801
GY28-6771
GY27-7161

GY28-6771
GY28-6773

GY28-6661

Interlude 10E
in FORTRAN IV (E)
functions of
Interlude 14
in FORTRAN IV (E)
functions of
Interlude 15
in FORTRAN IV (E)
functions of

25 GY28-6601
25 GY28-6601
25 GY28-6601

Intermediate area
in ALGOL-TO-PL/l LCP
29 GY33-7006
Intermediate data set
in LINKAGE EDITOR (F)
31 GY28-6667
Intermediate file
in PL/I (F) COMPILER
29 GY28-6800
Intermediate merge phase
in SORT/MERGE
33 GY28-6597
decision tables
functions of
module list
name on SYSLMOD
sequence control
Intermediate output processor (IEWLMOUT)
in LINKAGE EDITOR (F)
31 GY28-6667
description of
chart
synopsis
use of hierarchy table
Intermediate processing
in LINKAGE EDITOR (F)
31 GY28-6667

•

252

Iutezmediate - InterpartitioD
Intermediate processing
I in LINKAGE EDITOR (F)
31 GY28-6667
L--------------------------------------(continued)
description of
charts
synopsis
operation diagram
objectives
overview
Intermediate Result References
in COBOL (F)
24 GY28-6382
Procedure IC-Text format
Intermediate results
in COBOL (F)
24 GY28-6382
Intermediate storage
in SORT/MERGE
33 GY28-6597
formulas
I/O operations
units
Intermediate storage procedure
in ALGOL (F) COMPILER
26 GY33-8000
Intermediate text
in ALGOL-TO-PL/l LCP
29 GY33-7006
in FORTRAN IV (E)
25 GY28-6601
adjective code field
COMMON intermediate text
definition of
EQUIVALENCE intermediate text
FORMAT intermediate text
generation of
mode/type field
modification of
pointer field
READ/WRITE/FIND intermediate text
reordering of
subscript intermediate text
in FORTRAN IV (H) COMPILER
25 GY28-6642
chains
phase 20 modifications
Intermediate text entry
in FORTRAN IV (H) COMPILER
25 GY28-6642
format of
modifications by phases 15 and
20
Intermittent errors
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
Model 155
Model 165
Intermodule communication
in MACHINE-CHECK HANDLER, S360 M85 31 GY27-7184
INTERNAL (keyword attribute)
in PL/I SYNTAX CHECKER PLM
attribute classification
in GENERIC attribute list
Internal change of data
in PL/I SUBROUTINE LIBRARY
Internal code
in PL/I (F) COMPILER
in text string
Internal Compiler Text
in COBOL (F)
Internal conversions
in PL/I SUBROUTINE LIBRARY
Internal director
in GRAPHIC SUBRTN. PACKAGE
Internal entry point, diagram
in PL/I (F) COMPILER
Internal Error Routine (IKAIERR)
in GRAPHIC JOB PROCESSOR SUPPORT
chart
description
format of message module

29 GY33-8009

29 GY28-6801
29 GY28-6800
24 GY28-6382
29 GY28-6801
25 GY27-7152
29 GY28-6800
36 GY27-7159

function
messages produced by
parameter list
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
chart
description of
message module (IKAMERRO)
messages produced by
parameter list for
Internal form of PL/I statements
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
Internal formats of dictionary
entries
in PL/I (F) COMPILER
29 GY28-6800
Internal Formats of Text
in PL/I (F) COMPILER
29 GY28-6800
Internal input data area
in LOADER
31 GY28-6714
concatenation restriction
definition of
format
fixed-length records
variable-length records
processing
reading of
SYSLIN control block for
Internal library routines
in PL/I (F) COMPILER
29 GY28-6800
Internal list entry format
in MVT JOB MANAGEMENT
36 GY28-6660
Internal name
in ALGOL (F) COMPILER
26 GY33-8000
table of internal names
processing
identifiers
character strings
boolean constants
constants
treatment in generation of object code
Internal object module
31 GY28-6714
in LOADER
Internal parameter table-IFCEREPO (165)
32 GY28-6614
in UTILITIES
Internal reference number
in ALGOL-TO-PL/l LCP
29 GY33-7006
Internal routines, ACCOUNT command control
module
in TSO COMMAND PROCESSOR VOL1-ACCT 36 GY28-6771
Internal service routines, list of
in TSO COMMAND PROCESSOR VOL1-ACCT 36 GY28-6771
Internal statement number
in FORTRAN IV (E)
25 GY28-6601
compiler assigning of
in FORTRAN IV (H) COMPILER
25 GY28-6642
in phase 30
Internal subroutines
29 GY33-8009
in PL/I SYNTAX CHECKER PLM
Internal subroutines, in IKJEFH02
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
CTRLCHAR
KEYCHAR
Internal text
in COBOL-TO-PL/l LCP
29 GY33-7007
in FORTRAN IV (E)
25 GY28- 6601
Internal text buffer chains
25 GY28-6601
in FORTRAN IV (E)
Internal Text formats
in COBOL (F)
24 GY28-6382
Internal 1 Text
29 GY33-7007
in COBOL-TO-PL/l LCP
Internal 1 Text literal
in COBOL-TO-PL/l LCP
29 GY33-7007
Internal 2 Text
29 GY33-7007
in COBOL-TO-PL/l LCP
Interpartition post

253
Interpartition post
l--------------------------------------(continued)
in TSO CONTROL PROGRAM
36 GY28-7199
canceling in event of abnormal
termination
completing when user is
restored
Interpartition Post Block
36 GY28-7199
in TSO CONTROL PROGRAM
Interpreter
in COBOL (E)
in CONTROL PROGRAM WITH MFT
in JOB MANAGEMENT
control routine
DD routine
entrance list (NEL)
EODAD exit routine
functions
get routine
message routine
processing
system output routine
termination routine
work area (IWA)
in MVT JOB MANAGEMENT
control routine
construction of (with ASB)
entrance list
exit list
exit routine
exits
functions of
initialization of
interface
option list
Interpreter, composition of
in TESTRAN
Interpreter, operation of
in TESTRAN
Interpreter (continued)
in MVT JOB MANAGEMENT
parameter processing
post scan exit routine
region regulator
scan routine
use of queue management
Interpreter action table
in TESTRAN
Interpreter entrance list (NEL)
in CONTROL PROGRAM WITH ~WT
in REMOTE JOB ENTRY
Interpreter/initiator interface
in JOB MANAGEMENT
Interpreter logic flow
in TESTRAN
Interpreter message routine
in TESTRAN
Interpreter work area (IWA)
in CONTROL PROGRAM WITH MFT
format and description of
reader use of
in MVT JOB MANAGEMENT
format and description of
initialization of
use of

24 GY24-5009
36 GY27-7128
36 GY28-6613

36 GY28-6660

37 GY28-6611
37 GY28-6611
36 GY28-6660

37 GY28-6611
36 GY27-7128
36 GY30-2005
36 GY28-6613
37 GY28-6611
37 GY28-6611
36 GY27-7128
36 GY28-6660

Interrelation of PL/I syntactical units
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
Interrupt
in CRJE PLM
Interrupt Controller (SGICL)
in S/360 JOB PROCESSING 1130/2250
chart
description of

36 GY30-2011
36 GY27-7166

Interpartition - Interruption

Interrupt handling
in PL/I SUBROUTINE LIBRARY
Interrupt handling, Model 91 & Model
195
in PL/I SUBROUTINE LIBRARY
Interrupt key
in JOB MANAGEMENT
Interrupt level 1
in S/360-1130 DATA TMN. - Ji'ORTRAN
Interrupt mask
in PL/I SUBROUTINE LIBRARY
Interrupt queue element (IQE)
in GRAPHICS ACCESS METHOD
Graphic Attention Routing (GAR)
user
Interrupt request block (IRB)
in GRAPHICS ACCESS METHOD
Interruption
in JOB MANAGEMENT
attention
external
I/O
SVC
in MFT SUPERVISOR
input/output
machine-check
program check
pseudo-disabled
supervisor call
timer/external
types
in TSO COMMAND PROC VOL5-0UTPUT
in TSO COMMAND PROCESSOR VOL3-EDIT
definition
Interruption, attention
in TSO COMMAND PROC VOL2-ALLOCATE
in TSO COMMAND PROC VOL4-LISTALC
in TSO COMMAND PROC VOL6-PROTECT
in TSO COMMAND PROCESSOR VOL1-LIST
in TSO COMMAND PROCESSOR VOL4-HELP
Interruption, TESTRAN SVC
in TESTRAN
Interruption code
in MACHINE-CHECK HANDLER, S360 M85
Interruption code,
machine-check
in MACHINE-CHECK HANDLER, M135/145
common settings
location
some major fields
in MACHINE-CHECK HANDLER, M155/165
Model 155
Model 165
Interruption conditions and trap
handling
in EMULATOR FOR 7090/7094/709411
Interruption handlers
in INTRO. TO CONTROL PROGRAM LOGIC
input/output
program
SVC
Interruption handling
in MVT SUPERVISOR
Interruption of emulation
in EMULATOR FOR 7090/7094/709411
Interruption processing
in· S/360-1130 DATA TMN. - FORTRAN
for the device in 1130
for the level in 1130
in System/360
in TSO COMMAND PROC VOL4-LISTBC
Interruption queue element
in JOB MANAGEMENT
in MVT SUPERVISOR
construction of
definition of

29 GY28-6801
29 GY28-6801
36 GY28-6613
25 GY27-7161
29 GY28-6801
30 GY27-7113

30 GY27-7113
36 GY28-6613

36 GY27-7236
•

36 GY28-6775
36 GY28-6773
36
36
36
36
36

GY28-6772
GY28-6774
GY28-6776
GY28-6771
GY28-6774

37

GY~8-6611

31 GY27-7184
30 GY27-7237

30 GY27-7198

35 GY27-7187
36 GY28-6605

36 GY28-6659
35 GY27-7187
25 GY27-7161

36 GY28-6774
36 GY28-6613
36 GY28-6659

254

Interruption - IN'l'4
Interruption queue element
I in MVT SUPERVISOR
36 GY28-6659
L--------------------------------------{continued)
format of
normal release of
queuing of
in TSO CONTROL PROGRAM
36 GY28-7199
Interruption queue element
(IQE)
in MFT SUPERVISOR
36 GY27-7236
creating
format of
in S/360-1130 DATA TMN. - FORTRAN 25 GY27-7161
Interruption request block
in MVT SUPERVISOR
36 GY28-6659
abnormal release of
construction of
definition of
format of
normal release of
Interruption request block (IRB)
in JOB MANAGEMENT
36 GY28-6613
36 GY27-7236
in MFT SUPERVISOR
creating
format of
in s/360-1130 DATA TMN. - FORTRAN 25 GY27-716l
in SEQUENTIAL ACCESS METHODS
30 GY28-6604
Interruption request block routine
in JOB MANAGEMENT
36 GY28-6613
Interruptions
in INTRO. TO CONTROL PROGRAM LOGIC 36 GY28-6605
asynchronous
in MACHINE-CHECK HANDLER. S360 M65 31 GY27-7155
input/output
machine-check
program- check
program-controlled (PCI)
Interruptions. arithmetic
in FORTRAN IV (E)
25 GY28-660l
object-time processing of
Interruptions. attention
in TSO COMMAND PROC VOL1-DEL~~E
36 GY28-6771
in TSO COMMAND PROC VOL5-LISTCAT
36 GY28-6775
Interruptions. control routines
in PL/I (F) COMPILER
29 GY28-6800
Interruptions disabled
in MACHINE-CHECK HANDLER. M135/145 30 GY27-7237
Interruptions terminal attention
Intro/ll
in TSO COMMAND PROCESSOR VOL1-ACCT 36 GY28-6771
processing of
setting up for
Interrupts, handling of
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
keyboard
order-controll ed
Interrupts, treatment of
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Interrupts, unexpected
in MACHINE-CHECK HANDLER, S360 M85 31 G~27-7184
Interrupts,. 7014
in 7074 EMULATE FOR M/165
GY27-7228
Interval
in MFT SUPERVISOR
converting time of expiration
to
timer
Interval timer
in ONLINE TEST EXECUTIVE PROGRAM
Intervention
in ONLINE TEST EXECUTIVE PROGRAM
dynamic communication
operator
Intervention request message

in INPUT/OUTPUT SUPERVISOR
Intervention required routine
in QUEUED TELECOMM. ACCESS METHOD
charts

30 GY28-6616
30 GY30-2002

INTERl
---rn-COBOL (E)

24 GY24-5009

INTER2
---rn-COBOL (E)

24 GY24-5009

INTO (keyword option)
in PL/I SYNTAX CHECKER PLM
record I/O statements

29 GY33-8009

INTRO getmain routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
INTRO macro
in TCAM SERVICEABILITY AIDS
30 GY30-2027
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
INTRO macro expansion linkage
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Introduction
in REMOTE JOB ENTRY
36
in TELECOMMUNICATION ACCESS METHOD 30
in TSO COMAND PROC VOL2-CNCL/STATUS36
in TSO COMMAND PROC VOL1-DELETE
36
in TSO COMMAND PROC VOL4-LISTBC
36
to the diagrams
to this PLM
to this volume
in TSO COMMAND PROC VOL5-LISTCAT
36
for LISTCAT
in TSO COMMAND PROC VOL5-LISTDS
36
in TSO COMMAND PROC VOL6-PROTECT
36
in TSO COMMAND PROC VOL6-SUBMIT
36
in TSO COMMAND PROC VOL6-TERMlNAL 36
in TSO COMMAND PROCESSOR VOL4-HELP 36
to this PLM
to this volume
in TSO COMMAND PROCESSOR VOL6-RUN 36
in TSO COMMAND PROCESSOR VOL6-SEND 36
Introduction to CALL CP
in TSO COMMAND PROCESSOR VOL2-CALL 36
Introduction to CHANGE subcommnad
in TSO COMMAND PROCESSOR VOLi-CHNG 36
Introduction to EXEC
in TSO COMMAND PROCESSOR VOL4-EXEC 36
Introduction to MO diagrams
in TSO COMMAND PROC VOL2-DELETE
36
Introduction to the method of operation
diagrams
in TSO COMMAND PROC VOL6-PROTECT
36
in TSO COMMAND PROC VOL6-TERMINAL 36
Introduction to the method of operations
diagram
in TSO COMMAND PROCESSOR VOL6-RUN 36

GY30-2005
GY30-2029
GY28-6772
GY28-6771
GY28-6774

GY28-6775
GY28-6775
GY28-6776
GY28-6776
GY28-6776
GY28- 6774
GY28-6776
GY28-6776
GY28-6772
GY28-6771
GY28-6774
GY28-6772
GY28-6776
GY28-6776
GY28-6716

36 GY27-7236
INTi routine
---rn COBOL (F)

24 GY28-6382

37 GY28-6651

INT2 routine
---rn COBOL (F)

24 GY28-6382

37 GY28-6651

INT3 routine
--rn COBOL (F)

24 GY28-6382

INT4 routine
---"In COBOL (F)

24 GY28-6382

255
INT5 routine
--in COBOL (F)

24 GY28-6382

INT6 routine
in COBOL (F)

24 GY28-6382

INT7 routine
--rn COBOL (F)

24 GY28-6382

Invalid
in EMULATOR FOR 7090/7094/709411
operation code
7094 channel or device specified
select
Invalid attributes, check for
iri PL/I (F) COMPILER
Invalid branch
in ALGOL (F) COMPILER
Invalid character
in ALGOL (F) COMPILER
Invalid characters
in PL/I (F) COMPILER
diagnostics
replaced by blanks
used as markers
Invalid identifier
in ALGOL (F) COMPILER
Invalid MCI (machine-check
interruption)
in MACHINE-CHECK HANDLER, S360 M85
Invalid operations
in 7074 EMULATE FOR M/165
Invalid parameters
in PL/I SUBROU'IINE LIBRARY
Invalid pictures
in PL/I (F) COMPILER
Invalid program-check
interruption
in MACHINE-CHECK HANDLER, S360 M85
Invalid record routine
in TESTRAN
Invalid requests
in SEQUENTIAL ACCESS METHODS

35 GY27-7187

36 GY28-6776
36 GY28-6776
36 GY28-6776

INZONE

26 GY33-8000

~COBOL-TO-PL/l LCP

26 GY33-8000

lOB

29 GY28-6800

26 GY33-8000
31 GY27-7184
GY27-7228
29 GY28-6801
29 GY28-6800
31 GY27-7184
37 GY28-6611
30 GY28-6604

25 GY28-6642

Invitation list
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
29 GY28-6801
29 GY28-6801
25 GY28-6638

Invokation,
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
explicit
implicit
Invoking
in TSO COMMAND PROC VOL4-LISTBC
IKJDAIR
IKJPARS
in UTILITIES
IEBCOMPR
IEBCOPY

36 GY28-6772

29 GY28-6800

INVERT-IEKPIV
in FORTRAN IV

Invocation count
in PL/I SUBROUTINE LIBRARY
Invocation of subtask
in PL/I SUBROUTINE LIBRARY
Invocation phase (IEYFORT)
in FORTRAN IV (G) COMPILER
definition
detailed description
general description
location in storage

INVPARM buffer
in TSO COMMAND PROC VOL6-PROFILE
INVPARM message
in TSO COMMAND PROC VOL6-PROFlLE
INWRMGR, in history
in TSO COMMAND PROC VOL6-SUBMIT

29 GY28-6800

COMPILER

IEBGENER
IEBlSAM
IEBPTPCH
IEHATLAS
system utilities
Invoking service routines
in TSO COMMAND PROC VOL2-ALLOCATE

lOBBCT

by

Invariance of subscripts
in PL/I (F) COMPILER
(li)

IN'l'5 -

36 GY28-6774

29 GY33-7007

in GRAPHICS ACCESS METHOD
30 GY27-7113
in INDEXED SEQUEN. ACCESS METHOD
30 GY28-6618
in MVT SUPERVISOR
36 GY28-6659
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
in SEQUENTIAL ACCESS METHODS
30 GY28-6604
lOB (input/output block)
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
channel end status
in data area directory
da ta area layout
with unit record devices
in INTRO. TO CONTROL PROGRAM LOGIC 36 GY28-6605
lOB (input/output block) prefix for chained
scheduling
in SEQUENTIAL ACCESS METHODS
30 GY28-6604
lOB flags
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
1052 error routine
1285, 1287, and 1288 error routines
1403 and 1443 error routines
1419 and 1275 error routines
1442, 2501, and 2520 error routines
2250 error routine
2260 and 1053 error routines
2301, 2302, 2303, 2305, 2311, 2314,
2321, and 3330 error routines
2400 tape series error routines
2495 error routine
2540 error routine
2671 error routine
5450 error routine
IOB-IEBTCRIN
in UTILITIES
32 GY28-6614
lOB pointer
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
lOB tables, address
in SORT/MERGE
33 GY28-6597
IOBAS
in COBOL (E)

24 GY24-5009

lOBAS1
--rnCOBOL (E)

24 GY24-5009

IOBAS2

~COBOL (E)

24 GY24-5009

IOBAS3

~COBOL (E)

24 GY24-5009

IOBAS4
-rDCOBOL (E)

24 GY24-5009

IOBBCT
in INDEXED SEQUEN. ACCESS METHOD

30 GY28-6618

32 GY28-6614

III

256

IOBLOCK - IOPLxxx

IOBLOCK, field in work area
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

IOBSEEK field
in MVT SUPERVISOR

36 GY28-6659

IOCB
in PLiI SUBROUTINE LIBRARY
creation
DIRECT usage
SEQUENTIAL usage
size
IOCB, example of chaining
in PL/I SUBROUTINE LIBRARY
IOCB (Input-Output Control
Block)
in PL/I SUBROUTINE LIBRARY
IOCB chaining
in PL/I SUBROUTINE LIBRARY
exclusive blocks
files
lOCH's

29 GY28-680l

29 GY28-680l
29 GY28-680l
29 GY28-680l

---rn TSO

IOCNT, field in COMMON
COMMAND PROC VOL5-0PERATOR

36 GY28-6775

IOCONTRL macro instruction
in BASIC TELECOMM. ACCESS METHOD

30 GY30-200l

IODELAY command
in EMULATOR FOR 7090/7094/709411
IODELAY Command Processor
in 7074 EMULATE FOR M/165
IODELAY Command Processor (IIOC1DLY)
in 7074 EMULATE FOR M/165
flowchart
function
MOD

35 GY27-7l87
GY27-7228
GY27-7228

IODEVICE macro instruction
in BASIC TELECOMM. ACCESS METHOD

30 GY30-200l

IOHALT macro
---rn-TCAM SERVICEABILITY AIDS

30 GY30-2027

IOMSG label
TSO COMMAND PROCESSOR VOL6-RUN
in flowchart

36 GY28-6776

---rn

IOMl (first level I/O message field)
---rn TSO COMMAND PROC VOL1-SUBRTNS
36 GY28-677l
as input to IKJPUTL
construction of
fields in
for writing I/O error messages to
terminal
10M2 (second level I/O message field)
in TSO COMMAND PROC VOL1-SUBRTNS
36 GY28-677l
as input to IKJPUTL
construction of
fields in
for writing SYNAD information to
terminal
IONAM

---rn ALGOL-TO-PL/l

LCP

29 GY33-7006

IOPARAMS
in TSO COMMAND PROC VOL5-0UTPUT
description
in operation

36 GY28-6775

IOPARM
---rn-TSO COMMAND PROC VOL6-PROTECT
reference point to IOPL

36 GY28-6776

IOPARM, data area
in TSO CO~~D PROC VOL2-DELETE

36 GY28-6772

IOPARML (MAIL directory processing I/O
parameter list>
in TSO COMMAND PROC VOL1-BROADCAST 36 GY28-6771
as input to IEEVSD10
fields in
setting flags in
for closing broadcast data set
for MAIL directory processing
for opening broadcast data set
size of
IOPARML (parameters for IEEVSDIO)
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
IOPB
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
IOPB, pointer to
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
IOPL
36 GY28-6774
in TSO COMMAND PROC VOL4-LISTBC
in TSO COMMAND PROC VOL6-RENAME
36 GY28-6776
in TSO COMMAND PROC VOL6-WHEN/END 36 GY28-6776
data area
in data area directory
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-677l
data area
in directory
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28- 6774
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
in TSO TMP 6 SERVICE ROUTINES
36 GY28-6770
IOPL, in data area directory
in TSO COMMAND PROC VOL5-0PERATOR 36 GY28- 6775
IOPL (I/O Parameter List)
in TSO COMMAND PROC VOL1-SUBRTNS
36 GY28-6771
fields in
input to IKJPUTL
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
description
operation
IOPL (I/O service routine parameter list)
in TSO COMMAND PROCESSOR VOLI-ACCT 36 GY28-6771
fields in
input to PUTGET service routine
input to PUTLINE service routine
size of
IOPL (input/output parameter list)
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY28-6772
in TSO COMMAND PROC VOL2-DELETE
36 GY28- 6772
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
description
used by
IOPL (terminal messages I/O parameter list)
in TSO COMMAND PROC VOL1-BROADCAST 36 GY28-6771
fields in
initialization of
input to IKJPUTL
size of
IOPLECB
in TSO COMMAND PROC VOL6-WHEN/END
field in IOPL

36 GY28-6776

IOPLIOPB
in TSO COMMAND PROC VOL6-WBEN/END
field in IOPL

36 GY28-6776

IOPLUPT
in TSO COMMAND PROC VOL6-WHEN/END
field in IOPL

36 GY28-6776

IOPLxxx, field in IOPL
in TSO COMMAND PROCESSOR VOL1-ADD

36 GY28-677l

257
IOPOEcr
in TSO COMMAND PROC VOL6-WHEN/END
field in IOPL

36 GY28-6776

IOPRO
in ALGOL-To-PL/1 LCP
in COBOL-TO-PL/1 LCP
in FORTRAN IV-TO-PL/1 LCP

29 GY33-7006
29 GY33-7007
29 GY33-7000

IOREQ
in CRJE PLM

36 GY30-2011

IORGSW
---rn-MVT SUPERVISOR

36 GY28-6659

lOS
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
lOS appendage table
in GRAPHICS ACCESS METHOD
30 GY27-7113
lOS Interface Routine
in MACHINE-CHECK HANDLER, S360 0085 31 GY27-7184
description
responsibilities
IOSCAN
in COBOL-TO-PL/l LCP

29 GY33-7007

IOSGEN macro
in MACHINE-CHECK HANDLER, S360 0085 31 GY27-7184
IOSRL

---rn

TSO TMP & SERVICE ROUTINES

36 GY28-6770

IOSUB-IEKTIS
FORTRAN IV (H) COMPILER

---rn

25 GY28-6642

IOSUB2-IEKTIO
---rn-FORTRAN IV (H) COMPILER

25 GY28-6642

IPDAGH module
---rn-FORTRAN IV SYNTAX CHECKER PLM
how created
metalanguage elements in
storage requirements
IPDER module
FORTRAN IV SYNTAX CHECKER PLM
function of
interface with executive

---rn

IPDERERR CSECT
in FORTRAN IV SYNTAX CHECKER PLM
flag byte in
flowchart
WKASFAIL setting in
IPDSN module
FORTRAN IV SYNTAX CHECKER PLM
parts of
work area for

---rn

IPDSNCKR CSECT
in FORTRAN IV SYNTAX CHECKER PLM
debugging aids
flowchart
general
specific
interface with executive
relation to IPDSN module
WKASFAIL setting in
IPDSNEXC CSECT
in FORTRAN IV SYNTAX CHECKER PLM
BOMBR macro in
contents of
flowcharts

25 GY28-6831

IOPOECT -

lRANKINREC

format of
functions of
interface with environmental system
relation to IPDSN module
restrictions, work area
routines called by
storage requirements
WKASFAIL setting in
IPDSNWKA work area
in FORTRAN IV SYNTAX CHECKER PLM
format of
work areas within
IPDTEE module
in FORTRAN IV SYN'I'AX CHECKER PLM
creation of
metalanguage elements in
storage requirements
syntactic lines in

25 GY28-6831

25 GY28-6831

IPL
in CONTROL PROGRAM WITH MFT
36
in INITIAL PROGRAM LOADER AND NIP 36
bootstrap record functions
in INTRO. TO CONTROL PROGRAM LOGIC 36
in JOB MANAGEMENT
36
in MACHINE-CHECK HANDLER, S360 0085 31
IPL bootstrap-IBCDASDI
in UTILITIES
32
IPL/NIP parameter list data set, PRES RES
member of
in JOB MANAGEMENT
36
IPL pending switch
in JOB MANAGEMENT
36
IPL records
in DIRECT ACCESS DEVICE SPACE MGT. 30
IPL routine for TSO
in MVT JOB MANAGEMENT
36
IPLI
----in TSO COMMAND PROCESSOR VOL6-RUN
data set type PDE in RUNPDL

25 GY28-6831

IPPB (Interpartition Post Block)
in TSO CONTROL PROGRAM
format of
processing of
release of

25 GY28-6831

IPPRO
in FORTRAN IV-TO-PL/1 LCP
IPUT
---rn TSO COMMAND PROC VOL6-TERMINAL
field name in PDL

GY27-7128
GY28-6661
GY28-6605
GY28-6613
GY27-7184
GY28-6614
GY28-6613
GY28-6613
GY28-6607
GY28-6660

36 GY28-6776

36 GY28-7199

29 GY33-7000
36 GY28-6776

25 GY28-6831

25 GY28-6831

in GRAPHICS ACCESS METHOD
in MVT SUPERVISOR
IQE (Interruption Queue Element)
in TSO CONTROL PROGRAM
processing of
when user is removed from
subsystem
when user is restored
IQE list (AEQJ)
in MVT SUPERVISOR

30 GY27-7113
36 GY28-6659
36 GY28-7199

36 GY28-6659

IRANK
in COBOL-TO-PL/l LCP

29 GY33-7007

IRANKINREC
in COBOL-TO-PL/l LCP

29 GY33-7007

25 GY28-6831

III

IRB - IWA

258

IRB
in GRAPHICS ACCESS METHOD
in JOB MANAGEMENT
in MVT SUPERVISOR

30 GY27-7113
36 GY28-6613
36 GY28-6659

IREMP

---rn COBOL-To-PL/1

LCP

29 GY33-7007

IRN
--in ALGOL-TO- PL/1 LCP

29 GY33-7006

IRNEXT
in ALGOL-To-PL/1 LCP
IRREDUCIBLE
1n PLl1 (F) COMPILER
IRREDUCIBLE (keyword attribute)
in PL/I SYNTAX CHECKER PLM
attribute classification
in GENERIC attribute list
in PROCEDURE statement

command
mode
ISUB (dummy variable)
in PL/1 SYNTAX CHECKER PLM
code assignment
constant type
in expression (EISUBFL)
in IKM133
ISUB references
in PL/I (F) COMPILER

29 GY33-8009

29 GY28-6800

29 GY33-7006

ISUBFLAG in COMFLAG2
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

29 GY28-6800

ISUBS
in PL/I (F) COMPILER

29 GY28-6800

ITBP
---rn GRAPHIC SUBRTN. PACKAGE

25 GY27-7152

ITDO region boundary
in PL/I (F) COMPILER

29 GY28-6800

29 GY33-8009

ISAM
---rn DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
ISAM data set
in INDEXED SEQUEN. ACCESS METHOD
30 GY28-6618
ISAM parallel mounting
in INPUT/OUTPUT SUPPORT
30 GY28-6609
direct-access volume
searching

ITEM
---rn COBOL-TQ-PL/1 LCP
Item deletion
in TSO COMMAND PROC VOL1-DhLETE
failure indicator
occurrence indicator

36 GY28-6771

ISCALL IN IKM22
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

ITEMLENGTH
in COBOL-TO-PL/1 LCP

29 GY33-7007

ISCLOSE in 1KM22
in PL/1 SYNTAX CHECKER PLM

29 GY33-8009

ISDELAY in IKM22
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

ISDISPLY in IKM22
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

ISDPTR, subfield in WORKAREA
in TSO COMMAND PROCESSOR VOL6-RUN

36 GY28-6776

ISEQ
in ASSEMBLER (F)

21 GY26-3700

ISIF in IKMO 3
---rn PL/I SYNTAX CHECKER PLM

25 GY28-6831
29 GY28-6800
29 GY33-7000

Iterative DO-loops, dictionary entries
in PL/I (F) COMPILER
29 GY28-6800
Iterative DO statement
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
1TEXT
in COBOL (E)

24 GY24-5009

ITEXT3
---rn-COBOL (E)

24 GY24-5009

ITEXT5
---rn-COBOL (E)

24 GY24-5009

30 GY28-6618

ISN
in FORTRAN IV (E)
in FORTRAN IV (H) COMPILER

36 GY28-6775

29 GY33-8009

ISL
in INDEXED SEQUEN. ACCESS METHOD

Iteration control for search
in TSO COMMAND PROC VOL5-0UTPUT
Iteration count, effect on scan
in FORTRAN IV SYNTAX CHECKER PLM
Iteration factors, initial value
in PL/I (F) COMPILER
Iteration group
in FORTRAN IV-To-PL/1 LCP

29 GY33-7007

25 GY28-6601
25 GY28-6642

ISO
--in ALGOL-To-PL/1 LCP

29 GY33-7006

ISRETURN in 1KM22
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

ISSUESVC label
in TSO COMMAND PROC VOL6-PROTECT

36 GY28-6776

ITF:BASIC
--in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
data set requirement
definition
ITF:PL/I
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
data set requirement
definition
ITRC
---rn GRAPHIC SUBRTN. PACKAGE

25 GY27-7152

Issuing ACCOUNT mode message
in TSO COMMAND PROCESSOR VOL1-ACCT 36 GY28-6771
for abnormal termination of
subcommand
on first entry into ACCOUNT

1TST
---rn GRAPHIC SUBRTN. PACKAGE

25 GY27-7152

ISTEP

IWA
in CONTROL PROGRAM WITH MFT
in JOB MANAGEMENT

36 GY27-7128
36 GY28-6613

---rn EMULATOR FOR

7090/7094/709411

35 GY27-7187

259
IWAIT (Input wait)
in TSO CONTROL PROGRAM
definition of

in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-6771
36 GY28-7199

o

JBIOK
in COBOL (E)

24 GY24-5009

JCKEYPCE, field in PARSMACS
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
in CONTROL PROGRAM WITH MFT
in TSO COMMAND PROCESSOR VOL1-ADD
capability indicator
keyword
in TSO COMMAND PROCESSOR VOL1-CHNG
capability indicator
keyword
JCL capability
in TSO COMMAND PROC VOL1-DELETE
JCL data set
in GRAPHIC JOB PROCESSOR SUPPORT
as 5MB data set
summary of
use of
in S/360 JOB PROCESSING 1130/2250
activity chart
as 5MB data set
functions of
use of
JCL edit routine
in MVT JOB MANAGEMENT
in REMOTE JOB ENTRY
JCL exit
in CRJE PLM
JCL Generator (IKAJCL)
in GRAPHIC JOB PROCESSOR SUPPORT
APOSTR subroutine
chart
description of
example of use in defining a job
TESTLENG subroutine
writing extract records
writing JCL records
in S/360 JOB PROCESSING 1130/2250
APOSTR subroutine in
chart
description of
TESTLENG subroutine of
JCL get parameter routine
in JOB MANAGEMENT
JCL header routine
in JOB MANAGEMENT
JCL keyword entry
in JOB MANAGEMENT
JCL keyword routine
in JOB MANAGEMENT
JCL keywords
in JOB MANAGEMENT
JCL scan dictionary
in JOB MANAGEMENT
JCL scanning routine
in JOB MANAGEMENT
JCL statement
in JOB MANAGEMENT
processing
scanning
JCLKEY, field in ADDPDL
---rn-TSO COMMAND PROCESSOR VOL1-ADD
JCLNBR, field in CHNGPDL

IWAIT - Job

36 GY27-7128
36 GY28-6771

JCLS
in CONTROL PROGRAM WITH MFT

36 GY27-7128

JCLSWITS in history
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

JCT
in CONTROL PROGRAM WITH MFT
in JOB MANAGEMENT
JED processor
in REMOTE JOB ENTRY
JED table
in REMOTE JOB ENTRY
JEXT2
in COBOL (E)

36 GY27-7128
36 GY28-6613
36 GY30-2005
36 GY30-2005
24 GY24-5009

36 GY28-6771

36 GY28-6771
36 GY27-7159

36 GY27-7166

36 GY28-6660
36 GY30-2005
36 GY30-2011
36 GY27-7159

JFCB
---rn CONTROL PROGRAM WITH MFT
in JOB MANAGEMENT
in MVT JOB MANAGEMENT
creation of
in TSO COMMAND PROC VOL5-0UTPUT
JFCB (Job file control block)
in INTRO. TO CONTROL PROGRAM LOGIC
JFCB analyzer-IEBTCRIN
in UTILITIES
JFCB Processor routines
in MVT SUPERVISOR
description of
entry point names of
flowchart of
module name for
JFCB to data set header label
merge
in INPUT/OUTPUT SUPPORT
JFCB to DCB merge
in INPUT/OUTPUT SUPPORT
all access methods but GAM
BTAM/QTAM/GAM
JFCB to DSCB merge
in INPUT/OUTPUT SUPPORT

36 GY27-7128
36 GY28-6613
36 GY28- 6660
36 GY28-6775
36 GY28-6605
32 GY28- 6614
36 GY28-6659

30 GY28-6609
30 GY28-6609

30 GY28-6609

JFCBMASK field bit settings
in INPUT/OUTPUT SUPPORT

30 GY28-6609

JFCBX
in CONTROL PROGRAM WITH MFT

36 GY27-7128

JFLPT
in COBOL (E)

24 GY24-5009

JLEAD
in FORTRAN IV (H) COMPILER

25 GY28-6642

36 GY27-7166

36 GY28-6613
36 GY28-6613
36 GY28-6613
36 GY28-6613
36 GY28-6613
36 GY28-6613
36 GY28-6613
36 GY28-6613

in CONTROL PROGRAM WITH MFT
JMR- job name address
in MVT JOB MANAGEMENT

36 GY27-7128
36 GY28-6660

JNEMA
in COBOL (E)

24 GY24-5009

JNEST-JNEMA
COBOL (E)

24 GY24-5009

---rn

JNL
in TSO COMAND PROC VOL2-CNCL/STATUs36 GY28-6772
36 GY28-6771

Job, definition of
---in S/360 JOB PROCESSING 1130/2250
background
foreground

36 GY27-7166

•IIJ

Job - Job
Job (JOB) statement
in FORTRAN IV (E)
25 GY28-6601
Job and step enqueue routine
in JOB MANAGEMENT
36 GY28-6613
Job cancellation
in CRJE PLM
36 GY30-2011
Job cancelled message
in TSO COMAND PROC VOL2-CNCL/STATUs36 GY28-6772
Job class
in CONTROL PROGRAM WITH MFT
36 GY27-7128
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
for background jobs
for foreground jobs
for GJP
in GJOBCTL macro instruction
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
for background jobs
for foreground jobs
for SGJP
in GJOBCTL macro
instruction
Job completion message,
definition of
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
Job control cards
in ALGOL-TO-PL/1 LCP
29 GY33-7006
Job control language
in JOB MANAGEMENT
36 GY28-6613
in PL/I (F) COMPILER
29 GY28-6800
in TESTRAN
37 GY28-6611
Job control language (JCL)
in CONTROL PROGRAM WITH MFT
36 GY27-7128
Job control language card
in UPDATE ANALYSIS PROGRAM
36 GY28-7106
Job control language compression
in MVT JOB MANAGEMENT
36 GY28-6660
Job control language set (JCLS)
in CONTROL PROGRAM WITH MFT
36 GY27-7128
Job control language statements
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
conversion of input to
creation of
entering directly
generation of
intermediate text
passing to the reader/interpreter
Job Control Language(JCL)
statements
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
entering directly at 2250
generation of
intermediate text
passed to the
reader/interpreter
Job control statements for tape formatting
programs
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
Job control table (JCT)
in CONTROL PROGRAM WITH MFT
36 GY27-7128
data set integrity use of
format and description of
queue management use of
system task control use of
in INTRO. TO CONTROL PROGRAM LOGIC 36 GY28-6605
in JOB MANAGEMENT
36 GY28-6613
construction of
description of
in initiation
in interpreter processing
in restart
in termination
36 GY28-6660
in MVT JOB MANAGEMENT
address of
construction of
format and description of
initiator use of

260
I/O device allocation routine use of
in a queue entry
system restart use of
termination
use of
writing of
Job count in job
identification number
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
Job definition message phrases
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
Job definition messages
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
Job deletion routine
in CONTROL PROGRAM WITH MFT
36 GY27-7128
Job end processor
in CRJE PLM
36 GY30-2011
Job-failed bit
in MVT JOB MANAGEMENT
36 GY28-6660
initiator use of
interpreter use of
I/O device allocation routine
use of
termination routine
use of
Job file control block (JFCB)
in CONTROL PROGRAM WITH MFT
36 GY27-7128
format and description of
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
input to Extend routine
input to Allocate routine
merge to format 1 DSCB
in INTRO. TO CONTROL PROGRAM LOGIC 36 GY28-6605
in JOB MANAGEMENT
36 GY28-6613
construction of
description of
in auxiliary routines
in interpreter processing
in step initiation
housekeeping control routine
housekeeping routines
pointer
scratch information
in MVT JOB MANAGEMENT
36 GY28-6660
construction of
format and description of
interpreter processing of
I/O device allocation routine processing
of
system output writer processing of
system restart routine
processing of
Job file control block extension (JFCBX)
in CONTROL PROGRAM WITF MFT
36 GY27-7128
format and description of
Job file control blocks for log data sets
in MVT SUPERVISOR
36 GY28-6659
Job-flush bit
in MVT JOB MANAGEMENT
36 GY28-6660
I/O device allocation
routine use of
system restart routine use of
termination routine
use of
Job found list (LDQPOS)
in TSO COMMAND PROC VOL5-0UTPUT
36 GY28-6775
Job identification number
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
Job information card
in UPDATE ANALYSIS PROGRAM
36 GY28-7106
Job-Information card save (DATUM)
in UPDATE ANALYSIS PROGRAM
36 GY28-7106
Job-Information card save area
in UPDATE ANALYSIS PROGRAM
36 GY28-7106
Job information request routine
in REMOTE JOB ENTRY
36 GY30-2005 1

261
Job initiation routine
in CONTROL PROGRAM WITH MFT
36 GY27-7128
Job input
in CRJE PLM
36 GY30-2011
Job jobname not found message
in TSO COMAND PROC VOL2-CNCL/STATus36 GY28-6772
Job library data set
in JOB MANAGEMENT
36 GY28-6613
JOD management
in JOB MANAGEMENT
36 GY28-6613
components of
entry to
functions of
routines
Job management record (JMR)
in CONTROL PROGRAM WITH MFT
36 GY27-7128
in MVT JOB MANAGEMENT
36 GY28-6660
format and description of
Job management routine
in INTRO. TO CONTROL PROGRAM LOGIC 36 GY28-6605
function
location
resident routine
Job output notification
in CRJE PLM
36 GY30-2011
Job output retrieval
in CRJE PLM
36 GY30-2011
Job pack area control queue
in MVT SUPERVISOR
36 GY28-6659
Job pack area queue
in MFT SUPERVISOR
36 GY27-7236
contents of
in MVT SUPERVISOR
36 GY28-6659
Jon processing
in JOB MANAGEMENT
36 GY28-6613
JOB QEB processing
in REMOTE JOB ENTRY
36 GY30-2005
Job queue
in CONTROL PROGRAM WITH MFT
36 GY27-7128
initialization
Job queue, resident
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
Job queue, selected
in JOB MANAGEMENT
36 GY28-6613
Job queue data set
in TSO COMMAND PROC VOL5-0UTPUT
36 GY28-6775
Job scheduled message
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
Job scheduler
in CATALOG MANAGEMENT
30 GY28-6606
in TSO CATALOG MANAGEMENT
36 GY28-6745
Job scheduler, functions of
in JOB MANAGEMENT
36 GY28-6613
Job Scheduler Message Attributes Table
(IKASMBSA)
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
format of
use by IKAPSMBO
in s/360 JOB PROCESSING 1130/2250 36 GY27-7166
description of
format of
Job SchedUler Message Text Table (IKASMBS)
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
format
relationship of sections
use by IKAPSMBO
Job Scheduler Message Text
Tables (IKASMBSn)
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
description of
format of
relationship of sections
Job Scheduling Entrance List
in TSO CONTROL PROGRAM
36 GY28-7199
Job scheduling entrance list (JSEL)
in MVT JOB MANAGEMENT
36 GY28-6660

Job - Job
Job scheduling exit list (JSXL)
in MVT JOB MANAGEMEN'I'
36
Job scheduling option list (JSOL)
in MVT JOB MANAGEMENT
36
Job scheduling subroutine
in TSO COMMAND PROCESSOR VOL4-EXEC 36
Job scheduling subroutine (JSS)
in MVT JOB MANAGEMENT
36
Job Scheduling Task Initialization
routine
in TSO CONTROL PROGRAM
36
Job Scheduling Task Main Control
in TSO CONTROL PROGRAM
36
Job scheduling work area (JSWA)
in MVT JOB MANAGEMENT
36
JOB search routine
in REMOTE JOB ENTRY
36
Job selection routine
in CONTROL PROGRAM WITH MFT
36
Job statement
in FORTRAN IV (H) COMPILER
25
in INTRO. TO CONTROL PROGRAM LOGIC 36
JOB statement
in JOB MANAGEMENT
36
in PL/I (F) COMPILER
29
Job statement condition code routine
in JOB MANAGEMENT
36
Job statement processor routine
in JOB MANAGEMENT
36
Job step
in GRAPHIC JOB PROCESSOR SUPPORT
36
in INTRO. TO CONTROL PROGRAM LOGIC 36
initiation of
termina tion of
in MVT JOB MANAGEMENT
36
abnormal termination
TCB
termination determining
in PL/I (F) COMPILER
29
Job step control block (JSCB)
in MVT JOB MANAGEMENT
36
termination routine use of
Job step tasks
in MVT JOB MANAGEMENT
36
in START command
in input stream
Job step timing
in CONTROL PROGRAM WITH MFT
36
in the small parition module
in the step deletion routine
in the step initiation routine
in MFT SUPERVISOR
36
in MVT SUPERVISOR
36
in Dispatcher routine
description of
flowchart of
in Post routine
description of
flowchart of
in Wait routine
description of
flowchart of
in Timer Second-Level Interruption
Handler
description of
flowchart of
Job steps
in TESTRAN
37
Job stream
in INTRO. TO CONTROL PROGRAM LOGIC 36
Job stream output
in UPDATE ANALYSIS PROGRAM
36
Job-stream writer
in UPDATE ANALYSIS PROGRAM
36
Job submission
in CRJE PLM
36

GY28-6660
GY28-6660
GY28-6774
GY28-6660
GY28-7199
GY28-7199
GY28-6660
GY30-2005
GY27-7128
GY28-6642
GY28-6605
GY28-6613
GY28-6800
GY28-6613
GY28-6613
GY27-7159
GY28-6605
GY28-6660

GY28-6800
GY28- 6660
GY28-6660

GY27-7128

GY27-7236
GY28-6659

GY28-6611
GY28-6605
GY28-7106
GY28-7106
GY30-2011

11

262

Job - JOO56
Job submitted message
36
in TSO COMMAND PROC VOL6-SUBMIT
Job suspension
in MVT JOB MANAGEMENT
36
Job termination
in CONTROL PROGRAM WITH MFT
36
in MACHINE-CHECK HANDLER. M135/145 30
in MACHINE-CHECK HANDLER. M155/165 30
in PL/I (F) COMPILER
29
Job termination emulator.
in 7074 EMULATE FOR M/165
JOb termination handling module
in CRJE PLM
36
Job Termination routine
in EMULATOR FOR 7090/7094/709411
35
description
flowchart
in JOB MANAGEMENT
36
Job Termination routine. Postprocessor
in 7074 EMULATE FOR M/165
Job termination subtask
in CRJE PLM
36
Job time limit
in CONTROL PROGRAM WITH MFT
36
Job validity check routine
in JOB MANAGEMENT
36

in COBOL

(E)

24 GY24-5009

(E)

24 GY24-5009

GY28-6776
JTA13
GY28-6660
GY27-7128
GY27-7237
GY27-7198
GY28-6800

--rn COBOL

JTA15
in COBOL (E)

24

JTA16
in COBOL

(E)

24 GY24-5009

(E)

24 GY:.!4-5009

JTA3A
in COBOL (E)

24 GY24-5009

GY~4-5009

GY27-7228
JTA2A

GY30-2011
GY27-7187
GY28-6613
GY27-7228

--rn COBOL
JTA4A

--rn COBOL

(E)

24 GY24-5009

COBOL (E)

24 GY24-5009

JTA4C

GY30-2011

--rn

GY27-7128

Jump instructions
in FORTRAN IV (G) COMPILER

25 GY28-6638

GY28-6613
JUPGT

JOBEND routine
in REMOI'E JOB ENTRY
JOBLIB DD statement
--rnJOB MANAGEMENT

36 GY30-200S

--rn

COBOL (E)

24 GY24-S009

JUSTIFY
in COBOL-TO-PL/l LCP

29 GY33-7007

JOO02
in COBOL (E)

24 GY24-S009

36 GY28-6613

JOBLISTP. in PARMLIST
in TSO COMAND PROC VOL2-CNCL/STATUS36 GY28-6772

JOO03

JOBNAME
in TSO COMMAND PROC VOL6-PROI'ECT
36
in DAPB18
JOBNAME. in EXITPARM
in TSO COMANO PROC VOL2-CNCL/STATUS36
JOBNAME. in PDL
in TSO COMMAND PROC VOLS-OUTPUT
36
Jobname list
in TSO COMAND PROC VOL2-CNCL/STATUs36
description
operation
36
in TSO COMMAND PROC VOLS-OUTPUT
Jobname list sort routine
in TSO COMAND PROC VOL2-CNCL/STATUS36
JOBNAMEP. in PDE
in TSO COMAND PROC VOL2-CNCL/STATUs36

GY28-6776
GY28-6772
GY28-677S
GY28-6772
GY28-677S

--rn
JOOOS
----rn:

COBOL (E)

24 GY24-S009

COBOL (E)

24 GY24-S009

JOO07
in COBOL (E)

24 GY24-S009

JOO09
in COBOL (E)

24 GY24-S009

JOOll

--rn

COBOL (E)

24 GY24-S009

GY28-6772

J0022
in COBOL (E)

24 GY24-5009

36 GY28-6776

J002S
in COBOL (E)

24 GY24-S009

JOBSLOT. in message
in TSO COMAND PROC VOL2-CNCL/STATUS36 GY28-6772

JOO28
in COBOL (E)

24 GY24-S009

JOBX. in history
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

--rn

JPACQ
in MVT SUPERVISOR

36 GY28-66S9

JOO30
in COBOL

(E)

24 GY24-5009

JSEL (Job Scheduling Entrance List)
in TSO CONTROL PROGRAM
initialization of

36 GY28-7199

J0032
in COBOL (E)

24 GY24-S009

JOOSO
in COBOL (E)

24 GY24-S009

JOOS4
--rn
COBOL

(E)

24 GY24-S009

COBOL (E)

24 GY24-S009

JOBNAMPT. in control
in TSO COMMAND PROC VOL6-SUBMIT

GY28-6772

JOO29

JSS
in MVT JOB MANAGEMENT

JTA12

(E)

24 GY24-5009

36 GY28-6660

JTAll

--rn COBOL

COBOL (E)

24 GY24-5009

JOOS6

--rn

263
J0059
in COBOL (E)

24 GY24-5009

J0060
in COBOL (E)

24 GY24-5009

JI029
in COBOL (E)

24 GY24-5009

J2FLD
in COBOL (E)

24 GY24-5009

J20PS
in COBOL (E)

24 GY24-5009

J30PF
in COBOL (E)

24 GY24-5009

J30PS
in COBOL (E)

24 GY24-5009

m

in SORT/MERGE
K operator
in FORTRAN IV SYNTAX CHECKER PLM
K phases, table handling routines
in PL/I (F) COMPILER
KBSRG
in CRJE PLM
in JOB MANAGEMENT
Keep
in FORTRAN IV (G) COMPILER
definition
general
KEEP data set disposition
in TSO COMMAND PROC VOL6-PROTECT
KEEP disposition
in JOB MANAGEMENT

33 GY28-6597

JOO59 - Keysave

in GRAPHIC SUBRTN. PACRAGE
25
Key to diagram symbols
in TSO COMMAND PROC VOL5-LISTDS
36
Key to symbol in M.O. diagrams
in TSO COMMAND PROC VOL6-RENAME
36
Key to symbols in M.O. diagrams
in TSO COMMAND PROC VOL2-ALLOCATE 36
Key to symbols in method-of-operation
diagrams
in TSO COMMAND PROC VOL5-LISTCAT
36
Key zero
in TSO COMAND PROC VOL2-CNCL/STATUs36
in TSO COMMAND PROC VOL6-SUBMIT
36
Key zero (SVC 100)
in TSO COMMAND PROC VOL5-0UTPUT
36

GY27-7152
GY28-6775
GY28- 6776
GY28-6772
GY28-6775
GY28-6772
GY28-6776
GY28-6775

Keyboard attentions
in GRAPHICS ACCESS METHOD
30 GY27-7113
Keyboard input and buffer data analysis
subroutines
in GRAPHIC SUBRTN. PAC RAGE
25 GY27-7152
Keyboard interrupt, processing
of
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
KEYCHAR; internal subroutine
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774

25 GY28-6831
29 GY28-6800
36 GY30-2011
36 GY28-6613
25 GY28-6638

KEYDIC
in FORTRAN IV-TO-PL/l LCP
KEYED
in ALGOL-TO-PL/l LCP
KEYED (keyword attribute)
in PL/I SYNTAX CHECKER PLM
attribute classification
in OPEN statement

29 GY33-7000 •
29 GY33-7006
29 GY33-8009

KEYFROM (keyword option)
in PL/I SYNTAX CHECKER PLM
in record I/O statements
KEYFROM (teleprocessing)
in PL/I SUBROUTINE LIBRARY

29 GY28-6801

KEYID routine
in PL/I (F) COMPILER

29 GY28- 6800

29 GY33-7006
36 GY28-6774

Keying and correlating features
in GRAPHIC SUBRTN. PAC RAGE

25 GY27-7152

36 GY28-6773

KEYLEN
in COBOL-TO-PL/l LCP

29 GY33-7007

KEYMODULO
in COBOL-TO-PL/l LCP

29 GY33-7007

36 GY28-6776
36 GY28-6613

29 GY33-8009

Key
in ALGOL-To-PL/l LCP
in TSO COMMAND PROC VOL4-LISTBC
protection
record (X' FF' )
in TSO COMMAND PROCESSOR VOL3-EDIT
definition
subcommand processors' use of
Key, damage to SPF
in MACHINE-CHECK HANDLER, M135/145
in MACHINE-CHECK HANDLER, M155/165
Key, field of QCB
in QUEUED TELECOMM. ACCESS METHOD
Key, storage protect
in TESTRAN
KEY (keyword option)
in PL/I SYNTAX CHECKER PLM
in record I/O statement
Key entries
in GRAPHIC SUBRTN. PACKAGE
Key Manipulation Routine (KYMANIP)
in GRAPHIC JOB PROCESSOR SUPPORT
description of
function in IKALPM
positioning the cursor
KEY sequence error condition
in PL/I SUBROUTINE LIBRARY
Key table
in GRAPHIC SUBRTN. PACKAGE
Key table management

30 GY27-7237
30 GY27-7198
30 GY30-2002
37 GY28-6611
29 GY33-8009
25 GY27-7152
36 GY27-7159

Keys
in CATALOG MANAGEMENT
description of
initialization of
use of
in COBOL (F)
ACTUAL
RECORD
SYMBOLIC
in GRAPHIC SUBRTN. PACKAGE
in TSO CATALOG MANAGEMENT
description of
initialization of
use of
Keys, in CHNGPDL
in TSO COMMAND PROCESSOR VOLI-CHNG

30 GY28-6606

24 GY28-6382

25 GY27-7152
36 GY28-6745

36 GY28-6771

29 GY28-6801
25 GY27-7152

Keysave area--load mode
in INDEXED SEQUEN. ACCESS METHOD

30 GY28-6618

e

KEYSDFXLE -

264

KWOxxx

KEYSDFILE
in COBOL-TO- PL/l LCP
KEYTABLE (keyword table)
in PL/I SYNTAX CHECKER PLM
built by KEYW macro
debugging hints for
for translation (IKM02)
valid PL/I keywords (IKM1l)
KEYTBL table
in COBOL (F)

29 GY33-7007
29 GY33-8009

24 GY28-6382

KEYTO (keyword option)
PL/I SYNTAX CHECKER PLM
in record I/O statements
KEYTO (teleprocessing)
in PL/I SUBROUTINE LIBRARY

29 GY28-680l

KEYVALUE
in COBOL-TO-PL/l LCP

29 GY33-7007

---rn

KEYW (assembler macro)
---rn PL/I SYNTAX CHECKER PLM
builds keyword table (KEYTABLE)
debugging hints for
usage
KEYWD routine
in PL/I (F) COMPILER

29 GY33-8009

29 GY33-8009

29 GY28-6800

Keyword
in FORTRAN IV (H) COMPILER
25 GY28-6642
pointer table
source statement
subroutines
table entry
table entry and text
table
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
attributes
options
statements
checking categories
preliminary checking
STATS6 in IKM03
with data attributes
without data attributes
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
definition
ASIS
BLOCK
CAPS

FIXED
FREE
LINE
NEW
NONUM
NOS CAN
NOM
OLD
SCAN
in TSO COMMAND PROCESSOR VOL4-HELP
list built by PARSE
parameter from PARSE
search
Keyword branch table (KBT)
in JOB MANAGEMENT
Keyword number
in TSO ~OMMAND PROC VOL6-TERMINAL
Keyword operands
in TSO COMMAND PROC VOL4-LISTBC
in TSO COMMAND PROC VOL6-PROFILE
Keyword parameters
in TSO COMMAND PROC VOL5-LISTDS
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6774

in TSO COMMAND PROC VOL6-TERMINAL 36 GY28-6776
BREAK
CLEAR
INPUT
LINES
LINESIZE
NOBREAK
NOCLEAR
NOINPUT
NOLINES
NOSECONDS
NOTIMEOUT
SCREEN
SCRSIZE
SECONDS
TIMEOUT
Keyword processing from CREATE card-IEBDG
443ff.
in UTILITIES
32 GY28-66l4
Keyword scanning-IEHPROGM
in UTILITIES
32 GY28-66l4
Keyword Table
in COBOL-TQ-PL/l LCP
29 GY33-7007
Ke yword tab les
in PL/I (F) COMPILER
29 GY28-6800
construction
in read-in logical phase
Keyword token codes
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
KEYTABLE (IKM11)
KEYW macro
KEYWORDS list
Keywords
in FORTRAN IV (E)
25 GY28-660l
processing for if used as variables,
arrays, or external names in source
statements
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY28-6772
in TSO COMMAND PROC VOL5-LISTCAT
36 GY28-6775
meaning of
in TSO COMMAND PROC VOL6-PROTECT
36 GY28-6776
in TSO COMMAND PROC VOL6-R~NAME
36 GY28-6776
in TSO COMMAND PROCESSOR VOL1-ACCT 36 GY28-677l
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771
DATA
in storage
JCL
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
LIST and NOLIST
KEYWORDS
in PL/I SYNTAX CHECKER PLM
29 GY33- 8009
list of
part of IKMDATA macro
Keywords, optional
in TSO COMMAND PROC VOL1-DELETE
36 GY28-6771
in TSO COMMAND PROC VOL4-LISTALC
36 GY28-6774
processing of
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-677l
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
Keywords (table of valid PL/I)
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
length of
token codes
5-bit packed in KEYTABLE
8-bit EBCDIC KEYWORDS
Keywords of SEND
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776

36 GY28-66l3
36 GY28-6776

KONBOX
--rDCRJE PLM

36 GY28-6774
36 GY28-6776

-----rxl FORTRAN IV (H) COMPILER

36 GY28-6775
36 GY28-6775

KWOxxx fields in EOIDATDF
--rDTSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774

36 GY30-20ll

KORAN-IEKQKO

25 GY28-6642

265
KYMANIP entry pOint in lKALPM
in GRAPHIC JOB PROCESSOR SUPPORT

36 GY27-7159

II
in TSO COMMAND PROCESSOR VOL3-EDIT
L- E- forms
in GRAPHICS ACCESS METHOD
input/output macro instructions
SAEC macro instruction
L-format code
in FORTRAN IV-TO-PL/1 LCP
L operator
in FORTRAN IV SYNTAX CHECKER PLM
LAB
in PL/I SYNTAX CHECKER PLM
Label
---rn
ALGOL

36 GY28-6773
30 GY27-7113

29 GY33-7000
25 GY28-6831
29 GY33-8009

(F) COMPILER
26
in ALGOL-TO-PL/1 LCP
29
in INTRO. TO CONTROL PROGRAM LOGIC 36
construction of
use of
in LOADER
31
definition (LD) or reference (LR)
LD and LR processing
description of
introduction to
operation diagram
reference
when CESD type is CM
when CESD type is SD
in PL/I SYNTAX CHECKER PLM
29
LABEL
in ALGOL-TO-PL/1 LCP
29
Label, in program listings
in TSO COMMAND PROC VOL4-LISTBC
36
cross references to
philosophy of
Label, volume
in DIRECT ACCESS DEVICE SPACE MGT. 30
LABEL (keyword attribute)
in PL/I SYNTAX CHECKER PLM
29
checking
subroutine LAB (IKM23)
Label Address Table
in ALGOL (F) COMPILER
26
compile time
object time
Label buffer area
in UTILITIES
32
Label cross-reference table
in GRAPHICS PROBLEM ORIENTED RTNS. 30
Label definition (LD)
in LINKAGE EDITOR (F)
31
definition
entry processing
non-resolution processing
LABEL-IEKTLB
in FORTRAN IV (H) COMPILER
25
LABEL IN IT IAL
in ALGOL-To-PL/1 LCP
29
LABEL keyword
in TSO COMMAND PROC VOL5-LISTDS
36
function
processing
Label lists
in FORTRAN IV (G) COMPILER
25
Allocate
Exit
Gen
Parse
Unify

GY33-8000
GY33-7006
GY28-6605
GY28-6714

GY33-8009
GY33-7006
GY28-6774

GY28-6607
GY33-8009

GY33-8000

GY28-6614
GY27-7110
GY28-6667

GY28-6642
GY33-7006
GY28-6775

GY28-6638

KYMANIP -

Label prefixes
in PL/I SYNTAX CHECKER PLM
29
checking of
conflict with ELSE-clause
ELSLABFL (conflict flag)
flags (LABFLAG)
in keyword statements
label identifier (in BEGIN)
order in statements (LABTAB)
required for statements (LABREQ)
subroutine LABTEST (IRM03)
subscript in
Label processing
in INPUT/OUTPUT SUPPORT
30
input
output
in TSO COMMAND PROC VOL5-LISTDS
36
Label processing-IEBCOMPR
in UTILITIES
32
Label processing routines-IEBGENER
in UTILITIES
32
Label reference (LR)
in LINKAGE EDITOR (F)
31
definition
non-resolution processing
resolution processing
Label References
in COBOL (E)
24
Label routine
in LINKAGE EDITOR (F)
31
Label table
in PL/I (F) COMPILER
29
Label to JFCB merge
in INPUT/OUTPUT SUPPORT
30
merging control block
information
Label user
in DIRECT ACCESS DEVICE SPACE MGT. 30
absolute allocation
Extend routine
normal allocation
split-cylinder allocation
sub-allocation
Label verification
in MVT JOB MANAGEMENT
36
Labeled statement references
in FORTRAN IV (G) COMPILER
25
Labels
---rn-FORTRAN IV (G) COMPILER
25
branch target
detailed description
global
local
mode
Labels, in code
in TSO COMMAND PROC VOL2-DELETE
36
on flowcharts
on MO diagrams
Labels, inserted in dictionary
in PL/I (F) COMPILER
29
Labels, LCP created
in COBOL-TO-PL/1 LCP
29
Labels, moving
in UTILITIES
32
Labels, 7094 header and trailer, writing
in EMULATOR FOR 7090/7094/709411
35
tape postprocessor
tape preprocessor

LADLCD

GY33-8009

GY28-6609
GY28-6775
GY28-6614
GY28-6614
GY28-6667

GY24-5009
GY28-6667
GY28-6800
GY28-6609

GY28-6607

GY28-6660
GY28-6638
GY28-6638

GY28-6772

GY28-6800
GY33-7007
GY28-6614
GY27-7187

LABFLAG (label flag)
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

LABLCD
---rn-COBOL (E)

24 GY24- 5009

LABPERF -

266

LCLAB

LABPERF
in COBOL-TO-PL/l LCP

29 GY33-7007

LABPRO
in FORTRAN IV-TO-PL/l LCP

29 GY33-7000

LABREC
-----rI1COBOL ( E)

LATGRP routine
-----rI1COBOL (F)

24 GY28-6382

LATRNM routine
--ri1COBOL (F)

24 GY28-6382

LATRPT routine
--ri1COBOL (F)

24 GY28-6382

LATTBT
-----rI1ASSEMBLER (F)

21 GY26-3700

24 GY24-5009

LABREQ (label required)
in PL/I SYNTAX CHECKER PLM
LABTAB (label order)
-----rI1PL/ I SYN'I'AX CHECKER PLM
LABTBL table
in COBOL (F)

29 GY33-8009
29 GY33-8009
24 GY28-6382

LABTEST
in PL/I SYNTAX CHECKER PLM
LABTLU-IEKCLT
in FORTRAN IV
in XREF

Lateral scan parameter block (LSCANHLK)
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771
Lateral scan subroutine
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771

(ti)

COMPILER

29 GY33-8009
25 GY28-6642

LABTSTFL in COMFLAG2
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

LAND
in FORTRAN IV

25 GY28-6642

(ti)

COMPILER

LANGPRCR
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
BASIC/IPLI use of
definition
Language translators
in ASSEMBLER (F)
in LINKAGE EDI'IOR (F)
in LOADER
Large partition
1n CONTROL PROGRAM WITH MFT
definition of

Layout of DATADICT
in COBOL-TO-PL/l LCP
Layouts, data areas
in TCAM SERVICEABILITY AIDS
LBI'!' operator
in FORTRAN IV (H) COMPILER
LBL FIELD XLATE routine
---in FORTRAN IV (G) COMPILER
LBL process routine
in FORTRAN IV (G) COMPILER
LBL roll
in FORTRAN IV (G) COMPILER

29 GY33-7007
30 GY30-2027
25 GY28- 6642
25 GY28-6638
25 GY28-6638
25 GY28-6638

LBLNK
in FORTRAN IV-TO-PL/l LCP

29 GY33-7000

Le record
in COBOL-TO-PL/l LCP

29 GY33-7007

21 GY26-3700
31 GY28-6667
31 GY28-6714

LeA (Library Communication Area)
in PL/I SUBROUTINE LIBRARY

29 GY28-6801

36 GY27-7128

LCAU
in FORTRAN IV-TO-PL/l LCP

29 GY33-7000

LCB
LAST, in PDE
---rn TSO COMAND PROC VOL2-CNCL/STATUs36
LAST CHAR CNT variable
in FORTRAN IV (G) COMPILER
25
definition
description
in Parse
LAST ROLL routine
in COBOL (F)
24
LAST SOURCE CHAR variable
in FORTRAN IV (G) COMPILER
25

GY28-6772
GY28-6638

GY28-6638

29 GY33-8009

LASTERKEY
in COBOL-TO-PL/l LCP

29 GY33-7007

LATACP routine
-----rI1COBOL (F)
Latches, tape
in 7074 EMULATE FOR M/165
Lateral chains
in TSO COMMAND PROCESSOR VOL1-ADD
local
total

LCBTRACE
in TCAM SERVICEABILITY AIDS

30 GY30-2027

LCCRT
in FORTRAN IV-TO-PL/l LCP

29 GY33-7000

GY28-6382

LASTENT
in PL/I SYNTAX CHECKER PLM

LASTPSW, field in STAEWA
in TSO COMMAND PROC VOL5-0PERATOR

in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
LCB output area
in TSO COMMAND PROC VOL6-TERMINAL 36 GY28-6776
LCB status byte usage by module
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029

LCE (Logon Communications Element)
---in TSO CONTROL PROGRAM
construction of
format of

36 GY28-7199

LCENT
in FORTRAN IV-TO-PL/l LCP

29 GY33-7000

LCEQU
in FORTRAN IV-TO-PL/l LCP

29 GY33-7000

LCET
in FORTRAN IV-TO-PL/l LCP

29 GY33-7000

LeH (logical channel)
in INPUT/OUTPUT SUPERVISOR

30 GY28-6616

LCLAB
in FORTRAN IV-TO-PL/l LCP

29 GY33-7000

36 GY28-6775
24 GY28-6382
GY27-7228
36 GY28-6771

267
LCLE
---rn FORTRAN IV-TO-PLll LCP

29 GY33-7000

LCLF
in FORTRAN IV-TO-PL/l LCP

29 GY33-7000

LCLO
in FORTRAN IV-TO-PL/l LCP

29 GY33-7000

LCLS

in FORTRAN IV-TO-PL/l LCP

29 GY33-7000

LCLT
---rn FORTRAN IV-TO-PL/l LCP

29 GY33-7000

LCOMPL
in FORTRAN IV (H) COMPILER

25 GY28-6642

LCLE - LENGTHVALUE
Leading-zeroes count, in K operator rtn
in FORTRAN IV SYNTAX CHECKER PLM
25 GY28-6831
Leased receive scheduler
---rn-TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
LEAVE (ENVIRONMENT option)
in PL/I SYNTAX CHECKER PLM
Leave Transfer Trap Mode routine
(IITINLTM)
in EMULATOR FOR 7090/7094/709411

29 GY33- 8009
35 GY27-7187

LCS (2361 Core storage)
in MVT SUPERVISOR

36 GY28-6659

Left bracket
---rn ALGOL-TO-PLll LCP
Left parenthesis
in ALGOL-TO-PL/l LCP
Left-part variable
in ALGOL-TO-PL/l LCP
Left source margin (LSM)
in PL/I SYNTAX CHECKER PLM
Left Variable Table
in ALGOL (F) COMPILER

LCSECT field
in COBOL (F)

24 GY28-6382

LEGALDEV switch
in ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

LCSUF
in FORTRAN IV-To-PLll LCP

29 GY33-7000

LEGALTST switch
in ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

LCP
in ALGOL-TO-PL/l LCP
LCP, overall logic
in COBOL-TO-PL/l LCP
in FORTRAN IV-To-PLll LCP
LCP created labels
in COBOL-TO-PL/l LCP

29 GY33-7006
29 GY33-7007
29 GY33-7000
29 GY33-7007

LCT
in CONTROL PROGRAM WITH MFT
in JOB MANAGBMENT
LCTA
in FORTRAN IV-TO-PLll LCP
LCTC
--rn FORTRAN IV-To-PLll LCP

36 GY27-7128
36 GY28-6613

29 GY33-8009
26 GY33-8000

Legend of operation diagrams symbology
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651

LEND
in ALGOL-TO-PL/l LCP

29 GY33-7006

29 GY33-7000

LCTL
in FORTRAN IV-To-PLll LCP

29 GY33-7000

LCTR
in FORTRAN IV-To-PLll LCP

29 GY33-7000

LCVAR

IV-TO- PLI 1 LCP

29 GY33-7000

in LINKAGE EDITOR (F)
in LOADER
LD Dictionary Entries
in COBOL (F)
Data IC-Text format
Dictionary Entry format
LD-Text
in COBOL (F)
definition

31 GY28-6667
31 GY28-6714
24 GY28-6382

24 GY28-6382

LDQ XXXX, fields in IOPARAMS
in TSO COMMAND PROC VOL5-0UTPUT

36 GY28-6775

LDTEXT routine
in COBOL (F)

24 GY28-6382

in PLII SYNTAX CHECKER PLM

29 GY33-7006

29 GY33-7000

29 GY33-7000

~

29 GY33-7006

LENADJ, processing at
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772

LCTI
in FORTRAN IV-TO-PLll LCP

---rn FORTRAN

29 GY33-7006

29 GY33-8009

Length
in TSO COMMAND PROC VOL6-TERMINAL
line number
line size
number of seconds
in TSO COMMAND PROCESSOR VOL6-RUN
of command list
of data set name
of member name
of password
Length, segment
in TSO COMMAND PROCESSOR VOL6-TlME
Length control bytes
in PL/I SUBROUTINE LIBRARY
LENGTH function
in PL/I SUBROUTINE LIBRARY
Length of command
in TSO COMMAND PROC VOL6-WHEN/END
Length of data set
in TSO COMMAND PROC VOL2-DELETE
Length of entry
in TSO COMMAND PROCESSOR VOLI-ADD
Length of PRV
in PL/I SUBROUTINE LIBRARY
LENGTHBYTE
in COBOL-TO-PL/1 LCP
LENGTHDES
in COBOL-TO-PLll LCP
Lengths of modules
in PL/I SUBROUTINE LIBRARY
LENGTHVAL UE
in COBOL-TO-PLll LCP

36 GY28-6776

36 GY28-6776

36 GY28-6776
29 GY28-6801
29 GY28-6801
36 GY28-6776
36 GY28-6772
36 GY28-6771
29 GY28-6801
29 GY33-7007
29 GY33-7007
29 GY28-6801
29 GY33-7007

268

LENGTIll. - Library
LENGTH1, in MSGPARM
in TSO COMAND PROC VOL2-CNCLISTATUS36 GY28-6772
LENGTH2, in MSGPARM
in TSO COMAND PROC VOL2-CNCL/STATUS36 GY28-6772
LERB macro instruction
---rn BASIC TELECOMM. ACCESS METHOD

30 GY30-2001

LERPRT macro instruction
-rilBASIC TELECOMM. ACCESS METHOD

30 GY30-2001

Less than
---rn PL/I SYNTAX CHECKER PLM
«60-character set)
LT (48-character set)
Less than or equal to
in PL/I SYNTAX CHECKER PLM
<=(60-character set)
LE(48-character set)
LET/NOLET option
in LOADER
LET option
in LINKAGE EDITOR (F)

29 GY33-8009

29 GY33-8009

31 GY28-6714
31 GY28-6667

LETR
---rn ALGOL-TQ-PL/l LCP

29 GY33-7006

Letter
---rn-ALGOL-TO-PL/l LCP
29 GY33-7006
Letter operator
in FORTRAN IV SYNTAX CHECKER PLM
25 GY28-6831
assembler language equivalent of
description of
displacement conventions for
Letter-string
in ALGOL-TQ-PLIl LCP
29 GY33-7006
LEV
---in COBOL-TO-PLIl LCP

30 GY28-6618

36 GY28-6771
30 GY28-6606
36 GY28-6745
36 GY28-6771
29 GY33-8009

L~VL (level indicator)
---rn TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771

LEVNEXTLASTEL
in COBOL-TO-PLIl LCP

29 GY33-7007

LEVSLACKBYT
in COBOL-TO-PL/l LCP

29 GY33-7007

LGTHSLACKBYT
in COBOL-TO-PL/l LCP

29 GY33-7007

LIB roll
---in FORTRAN IV (G) COMPILER

25 GY28-6638

LIBF operator
in FORTRAN IV (H) COMPILER

25 GY28-6642

29 GY33-8009

Librarian
in CRJE PLM
Librarian queue module
in CRJE PLM
flowchart
function
microfiche directory
module description
register usage

29 GY33-8009

Libraries, updating symbolic
in UTILITIES

32 GY28-6614

Library
in ALGOL (F) COMPILER
in JOB MANAGEMENT

26 GY33-8000
36 GY28-6613

29 GY33-7007

LEV COUNT (structure level number)
in PLiI SYNTAX CHECKER PLM
in ALLOCATE statement
in DECLARE statement
in expressions (IKM133)

system recovery
system repair
system-supported restart
Levels of indexes
in INDEXED SEQUEN. ACCESS METHOD
description
format
Levels of information
in TSO COMMAND PROCESSOR VOL1-ADD
Levels of qualification
in CATALOG MANAGEMENT
in TSO CATALOG MANAGEMENT
Levels of UADS
in TSO COMMAND PROCESSOR VOL1-CHNG
LEVELTAB DSECT
in PL/I SYNTAX CHECKER PLM
format of IKM11
part of IKMDATA macro
pointer to (register 11)

36 GY30-2011
36 GY30-2011

Level count

---rn
PLiI SYNTAX CHECKER
Level indicator (LEVL)

PLM

in TSO COMMAND PROCESSOR VOL1-LIST
Level Number in Data Attribute
in COBOL (E)
Level numbers
in'PLII SYNTAX CHECKER PLM
decimal integer constant as
in ALLOCATE statement
in DECLARE statement
in ENTRY attribute
in structures
LEVEL ONE UNIFY routine
in FORTRAN IV (G) COMPILER
Level stack
in PLiI (F) COMPILER
Level 0 symbol
in LINKAGE EDITOR (F)
Level 1 symbol
in LINKAGE EDITOR (F)
LEVELNUMBER
in COBOL-TQ-PLIl LCP
Levels of error recovery
in MACHINE-CHECK HANDLER" M135/145
in MACHINE-CHECK HANDLER, M155/165
in MACHINE-CHECK HANDLER, s360 M65
functional recovery
storage reconfiguration

36 GY28-6771
24 GY24-5009
29 GY33-8009

25 GY28-6638
29 GY28-6800
31 GY28-6667
31 GY28-6667
29 GY33-7007
30 GY27-1237
30 GY27-7198
31 GY27-7155

job

linkage
procedure
step
SVC
in ONLINE TEST EXECUTIVE PROGRAM
of OLT programs
procedure (SYS1.PROCLIB)
SVC (SYS1.SVCLIB)
in PL/I SUBROUTINE LIBRARY
conversion package
creation
external names
format directors
macro instructions
selection
Library, call code
in PL/I (F) COMPILER
Library, SVC
in INDEXED SEQUEN. ACCESS METHOD
Library, TeAM OLT
in TCAM SERVICEABILITY AIDS

37 GY28-6651

29 GY28-6801

29 GY28-6800
30 GY28-6618
30 GY30-2027

269
Library affiliation
in UPDATE ANALYSIS PROGRAM
36
Library call
in PLII (F) COMPILER
29
data transmission
GET and PUT statements
initialization
RECORD-oriented I/O
termination
Library call sequences
in PLII (F) COMPILER
29
for not in-line CHAR and BIT string
for stroage triples
Library calling sequences
in PL/I (F) COMPILER
29
Library calls
in LINKAGE EDITOR (F)
31
function
data set
in LOADER
31
Library change table
in UPDATE ANALYSIS PROGRAM
36
Library communication area (LCA)
in PL/I SUBROUTINE LIBRARY
29
Library condense module
in CRJE PLM
36
entry point code
flowchart
microfiche directory
module description
register usage
Library conversion routines
in PL/I (F) COMPILER
29
Library directory entry
in UPDATE ANALYSIS PROGRAM
36
Library error package
in PLII (F) COMPILER
29
Library exponentiation subprograms
in FORTRAN IV (E)
25
assignment of registers for
generation of ESD card images for
Library function
in FORTRAN IV (8) COMPILER
25
Library I/O
in CRJE PLM
36
macros
module
shutdown module
start-up module
wait module
Library-name entry
in UPDATE ANALYSIS PROGRAM
36
Library name table
in UPDATE ANALYSIS PROGRAM
36
Library open routine (IEWOPNLB)
in LOADER
31
flowchart of
Library read block
in LINKAGE EDITOR (F)
31
Library routines
in PLII (F) COMPILER
29
external
FREEDSA
IHELSP
IHEQERR
IHEQTIC
IHESADA
IHESADB
IHESTGA
IHESTGB
internal
Library sequence table
in UPDATE ANALYSIS PROGRAM
36
Library sequence table build (UCRLIBSE)
in UPDATE ANALYSIS PROGRAM
36
j:.ibrary SSI

GY28-7106
GY28-6800

GY28-6800

GY28-6800
GY28-6667
GY28-6714
GY28-7106
GY28-6801
GY30-2011

Library - LIMC'l'
in UPDATE ANALYSIS PROGRAM
36
LIBRARY statement
in LINKAGE EDITOR (F)
31
general description of processing
in automatic library call
processing
in input processing
operation diagram
processor
in PL/I SUBROUTINE LIBRARY
29
Library subprograms
in FORTRAN IV (E)
25
exponentiation
generation of ESD card images for
IHCCGOTO
IHCDIOSE
IHCFCOME
IHCFIOSH
IHClBERR
Library work store (LWS)
in PL/I (F) COMPILER
29
Library workspace
in PL/I SUBROUTINE LIBRARY
29
definition
levels
primary
secondary
Library workspace (LWS)
in PL/I SUBROUTINE LIBRARY
29
LIBSEQ card
in UPDATE ANALYSIS PROGRAM

GY28-7106
GY28-6667

GY28-6801
GY28-6601

GY28-6800
GY28-6801

GY28-6801

36 GY28-7106

GY28-6800
GY28-7106
GY28-6800
GY28-6601

GY28-6642
GY30-2011

GY28-7106
GY28-7106
GY28-6714

Life-of-task (LOT) block
---rn CONTROL PROGRAM WITH MFT
creation of
format and description of

36 GY27-7128

Light pen
in GRAPHIC SUBRTN. PACKAGE
25
attention
disabling
enabling
locating position of
subroutines
Light pen (LP) attention
in GRAPHICS ACCESS METHOD
30
Light pen detect, processing
of
in S/360 JOB PROCESSING 1130/2250 36
Light pen detect, processing the
in GRAPHIC JOB PROCESSOR SUPPORT
36
Light Pen Manipulation Routine (IKALPM)
in GRAPHIC JOB PROCESSOR SUPPORT
36
chart
description of
key manipulation
KYMANIP subroutine

GY27-7152

GY27-7113
GY27-7166
GY27-7159
GY27-7159

GY28-6667
GY28-6800

GY28-7106
GY28-7106

LIKE (keyword attribute)
in PL/I SYNTAX CHECKER PLM
checking of
in major structures
in minor structures
subroutine LIKE n Prompter
1n TSO CONTROL PROGRAM
36
Logon Prompting Task
in TSO CONTROL PROGRAM
36
Logon subroutine of TCAM
in TSO CONTROL PROGRAM
36
Logon time
in TSO COMMAND PROC VOL6-PROTECT
36
Logon Work Area
in TSO CONTROL PROGRAM
36

GY28-7199
GY28-7199

Logon - Loose

LOGRE.C
---rn-INITIAL PROGRAM LOADER AND NIP

36 GY28-666l

LOGSCN
---rn-ONLINE TEST EXECUTIVE PROGRAM

37 GY28-665l

Logtype entry
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029

GY28-6776
GY28-6771
GY28-677l
GY28-6772
GY28-6774
GY28-6774
GY28-6775
GY28-6776
GY28-6776
GY28-6776
GY28-6776
GY28-677l
GY28-677l
GY28-6771
GY28-677l
GY28-6772
GY28-6774
GY28-6774
GY28-6776
GY28-6770

GY28-7l99

GY30-2029
GY28-6770

GY28-6771
GY28-677l
GY28-677l
GY28-7199

LONG
---rn ALGOL-TO-PL/l LCP
Long floating point intermediate
representation
in PL/I SUBROUTINE LIBRARY
Long PL/I statements
in PL/I SYNTAX CHECRER PLM
Long wait condition
in TSO CONTROL PROGRAM
canceling
definition of
indications of

29 GY33-7006
29 GY28-6801
29 GY33-8009
36 GY28-7199

Look-up terminal entry routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
LOOKER-IEKLOK
---rn-FORTRAN IV (H) COMPILER

25 GY28-6642

Lookup routine
in QUEUED TELECOMM. ACCESS METHOD
chart

30 GY30-2002

Loop
in FORTRAN IV (H) COMPILER
compos it matrixes
identification
number
field
parameter
selection
Loop control indicators
in TSO COMMAND PROCESSOR VOLI-CHNG
LOOP CONTROL roll
in FORTRAN IV (G) COMPILER
LOOp count
in ALGOL (F) COMPILER
LOOP DATA roll
in FORTRAN IV (G) COMPILER
description
in Parse
in Unify
LOOP SCRIPT roll
in FORTRAN IV (G) COMPILER
Looping (debugging hints for)
in PL/I SYNTAX CHECRER PLM

25 GY28-6642

36 GY28-6771
25 GY28-6638
26 GY33-8000
25 GY28-6638

25 GY28-6638
29 GY33-8009

GY28-7199
GY28-7199
GY28-6776
GY28-7l99

Logout
in MACHINE-CHECK HANDLER, M135/l45 30 GY27-7237
Logout, types of CPU
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
Logout analysis
in INPUT/OUTPUT SUPERVISOR
30 GY28-66l6

Loops
in FORTRAN IV (H) COMPILER
depth numbers of
identifying and reordering
module
in TCAM SERVICEABILITY AIDS
error
test
Loose record
---rn
LI1~GE

EDITOR (F)

25 GY28-6642

30 GY30-2027

31 GY28·-6667

282

LOPER - LVlSEG3

LOPEN macro instruction
in BASIC TELECOMM. ACCESS METHOD

30 GY30-2001

LOR
in FORTRAN IV (H) COMPILER

25 GY28-6642

LORAN-IEKQLO
FORTRAN IV (H) COMPILER

---rn

25 GY28-6642

Loser record
SORT/MERGE

33 GY28-6597

---rn

Lost data routine
---"In QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
chart
Lost-record counter
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237

LSDECLEN
in TSO COMMAND PROC VOL6-WHEN/END
field in LSD

36 GY28-6776

LSDRSVRD
in TSO COMMAND PROC VOL6-WHEN/END
field in LSD

36 GY28-6776

LSDTOTLN
in TSO COMMAND PROC VOL6-WHEN/END
field in LSD

36 GY28-6776

LSM
---in PL/I SYNTAX CHECKER PLM

29 GY33-8009

LSPACE routine
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
issued by Scratch routine

LOT
in CONTROL PROGRAM WITH MFT
LOW function
---in PL/I SUBROUTINE LIBRARY
Low-Speed mode
in EMULATOR FOR 7090/7094/709411

36 GY27-7128
29 GY28-6801
35 GY27-7187

Lower-level directory block
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
definition
use of
LPA (Link Pack Area)
in PL/I SUBROUTINE LIBRARY
LPACQ
in MVT SUPERVISOR
LPL
in CONTROL PROGRAM WITH MFT

LPS control routine
---in QUEUED TELECOMM. ACCESS METHOD
chart
LPS queue
in QUEUED TELECOMM. ACCESS METHOD
LPS subtask
in QUEUED TELECOMM. ACCESS METHOD
LPSEL-IEKPLS
FORTRAN IV (H) COMPILER

---rn

in LINKAGE EDITOR (F)
in LOADER

36 GY28-7199

LST
---in ALGOL-TO-PL/1 LCP
LST-ROUT routine
in COBOL (F)

29 GY33-7006

LSTKEY
---rn-ALGOL-TO-PL/1 LCP

29 GY33-7006

LSTOLDPW field naHe in IKJPARMD
in TSO COMMAND PROC VOL6-PROTECT

36 GY28-6776

24 GY28-6382

36 GY28-6659
36 GY27-7128
in PL/I SYNTAX CHECKER PLM

PROCESSOR VOL6-RUN

36 GY28-6659

29 GY28-6801

LPREC PDE

---rn TSO COMMAND

LSQA
in MVT SUPERVISOR
LSQA (Local System Queue Area)
in TSO CONTROL PROGRAM
definition of
initializing control blocks in
obtaining space for
specifying new size for

29 GY33-8009

36 GY28-6776
LTCOL

30 GY30-2002
30 GY30-2002

---rn FORTRAN

IV-TO-PL/1 LCP

in CONTROL PROGRAM WITH MFT
LTH record relative number
in MVT JOB MANAGEMENT

29 GY33-7000
36 GY27-7128
36 GY28-6660

30 GY30-2002
LTLCTR counter
---rn-COBOL (F)

24 GY28-6382

LTLRTN routine
---rn-COBOL (F)

24 GY28-6382

LTLTBL table
- - r i lCOBOL (F)

24 GY.28-6382

LTORG
in ASSEMBLER (F)

21 GY26-3700

LTORGB
--rilASSEMBLER (F)

21 GY26-3700

LVARTST i.n IKM22
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

25 GY28-6642
31 GY28-6667
31 GY28-6714

LRECL

---rn LINKAGE

EDITOR (F)

LSCANBLK, data area
in TSO COMMAND PROCESSOR VOL1-ADD
in TSO COMMAND PROC VOL6-WHEN/END
data area
in data area directory
LSDADATA
in TSO COMMAND PROC VOL6-WHEN/END
field in LSD
LSDANEXT
in TSO COMMAND PROC VOL6-WHEN/END
field in LSD

31 GY28-6667
36 GY28-6771
36 GY28-6776

LVLxNO fields in E01DATDF
---rn-TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
36 GY28-6776

36 GY28-6776

LV1SEG1, field in EXITWORK
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

LV1SEG3, field in EXITWORK
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

283
LV2SEG1, field in EXITWORK
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6115

LV2SEG2. field in EXITWORK
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6115

LWA
in CONTROL PROGRAM WITH MFT
in JOB MANAGEMENT
LWA (Logon Work Area)
in TSO CONTROL PROGRAM
format of
initialization of
LWAIT (locked wait)
CONTROL PROGRAM
affect on TGET processing
definition of
removal of

36 GY21-1128
36 GY28-6613
36 GY28-1199

--rn TSO

36 GY28-1199

LWKWORK work area
in REMOTE JOB ENTRY

36 GY30-2005

LWR routine
in REMOTE JOB ENTRY

36 GY30-2005

in PL/I (F) COMPILER
LWS (Library Workspace)
in PL/I SUBROUTINE LIBRARY
definition
pseudo-registers

29 GY28-6800
29 GY28-6801

VDA

format
LWT routine
in REMOTE JOB ENTRY
LXOR
--rn FORTRAN IV (H) COMPILER

36 GY30-2005
25 GY28-6642

Lxxxxxx fields in E01DATDF
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6714

operator
in FORTRAN IV SYNTAX CHECKER PLM
25 GY28-6831
assembler language equivalent for
description of
example of
M/S resident data area
in CONTROL PROGRAM WITH MFT
36 GY21-1128

~

M.O. (see method of operation diagrams)
in TSO COMMAND PROC VOL6-RENAME
36 GY28-6116
M=O DEB extent
---in INDEXED SEQUEN. ACCESS METHOD
MAC (I EUMAC)
---in ASSEMBLER (F)

30 GY28-6618
21 GY26-3100

Machine-check
in MACHINE-CHECK HANDLER, M135/145 30 GY21-1231
interruption code
location of
some major fields
new PSW
old P5W
subclasses
in MACHINE-CHECK HANDLER, S360 M85 31 GY21-7184
hard
soft
solid errors

LV2SEG1 - Machine
in MFT SUPERVISOR
handler
interruption
New PSW
Machine Check Handler
in INITIAL PROGRAM LOADER AND NIP
Model 65
Model 85
Model 155 or 165
in MVT SUPERVISOR
Contents Supervision with
entry point name(s) of
general description
module name(s) for
synopsis of
Machine Check Handler (MCH)/85
in MACHINE-CHECK HANDLER, S360 M85
abnormal termination of
auxiliary storage requirements
functional objectives
functional operatioIlfl
general characteristics
general logic flow
general logic flow and use of
storage data areas
hardware relationship
physical characteristics
how it receives
control
program description
relation to hardware recovery
facilities
5ystem/360 Operating System
relationship
Machine-Check Handler (modules)
in MACHINE-CHECK HANDLER. s360 M65
Machine-Check Handler (program)
in MACHINE-CHECK HANDLER, S360 M65
considerations
environment
error classification
operation
purpose
residence
scope of operation
Machine-Check Handler (theory)
in MACHINE-CHECK HANDLER, S360 M65
communication scheme
CPU analysis
environment analysis
environment recording
ini tialization
instruction retry analysis
processor storage analysis
recovery capability
system analysis
termination
Machine-check interruption
in MACHINE-CHECK HANDLER. S360 M85
Machine-Check Interruption (MCI)
in MACHINE-CHECK HANDLER, s360 M65
causes of
purpose of
unexpected
Machine-check interruption code
in MACHINE-CHECK HANDLER, M155/165
Model 155
Model 165
Machine-check new PSW
in MACHINE-CHECK HANDLER, 5360 M85
Machine-check old PSW
in MACHINE-CHECK HANDLER, S360 M85
Machine c:i:rcuitry
in MACHINE-CHECK HANDLER, M135/145
in MACHINE-CHECK HANDLER, M155/165
Machine configuration

36 GY21-1236

36 GY28-6661

36 GY28-6659

31 GY21-1184

31 GY21-1155111
31 GY21-1155

31 GY21-1155

31 GY21-1184
31 GY21-1155

30 GY21-1198

31 GY21-1184
31 GY21-1184
30 GY21-1237
30 GY21-1198

OJ

284

Machine - Macro

Machine configuration
L--------------------------------------(continued)
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
for CRJE program
storage requirements for syntax checker
Machine control characters
in MVT JOB MANAGEMENT
36 GY28-6660
Machine dependent modules-EREP
in UTILITIES
32 GY28-6614
Machine instructions, in text string
in PL/I (F) COMPILER
29 GY28-6800
Machine interruptions
in MVT SUPERVISOR
36 GY28-6659
recovery options for
Machine-language instructions
in FORTRAN IV (E)
25 GY28-6601
generation of
Machine malfunction
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
causing MCls
origin of
Machine malfunctions
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
sources of
types of
Machine malfunctions, sources of
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
Machine status
in ~~CHINE-CHECK HANDLER, S360 M85 31 GY27-7184
general references
obtaining a reading of
Machine Status Block (MSB)
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
in MVT JOB MANAGEMENT
36 GY28-6660
for Model 145
for Model 155
for Model 165
use of in MODE command processing
Machine Status Control, IGF29701
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
flowchart
module description
Machine Status Control module for
the Model 155
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
Machine Status Control module for
the Model 165
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
Machine Status Control
modules
in MACHINE-CHECK HANDLER, S360 M85 31 GY27-7184
Machine system
in ALGOL (F) COMPILER
26 GY33-8000
MACHOP
---rilASSEMBLER (F)

21 GY26-3700

MACPRO routine
--rnCOBOL (F)

24 GY28-6382

MACRO

--rn

ASSEMBLER (F)
21
Macro, library
29
in PL/I SUBROUTINE LIBRARY
Macro analysis
in UPDATE ANALYSIS PROGRAM
36
Switch
Macro-code interpreter
in PL/I ('F) COMPILER
29
Macro definition
in TELECOMMUNICATION ACCESS METHOD 30
in TESTRAN
37
DUMP
GO
SET
TEST

GY26-3700
GY28-6801
GY28-7106
GY28-6800
GY30-2029
GY28-6611

TRACE
Macro expansion
in SEQUENTIAL ACCESS METHODS
30 GY28-6604
Find (C option)
FREEBUF
FREE POOL
GETBUF
PRTOV
Macro expansion, STARTMH
in TCAM SERVICEABILITY AIDS
30 GY30-2027
Macro expansion linkage to modules
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
ATTEN
CANCELMG
CARRIAGE
CHECK
CHECKPT
CHNGP
CHNGT
CKREQ
CLOSE
CLOSEMC
CODE
COPYP
COPYQ
COPYT
COUNTER
CUTOFF
DATETIME
DCB
ERRORMSG
FORWARD
GET
HANGUP
HOLD
ICHNG
ICOPY
INBUF
INEND
INHDR
INITIATE
INMSG
INTRO
INVLIST
LOCK
LOCOPT
LOG
LOGON
LOGTYPE
MCPCLOSE
MRELEASE
MSGEDIT
MSGFORM
MSGGEN
MSGLIMIT
MSGTYPE
OPEN
OPTION
ORIGIN
OUTBUF
OUTEND
OUTHDR
OUTMSG
PATH
PCB
POINT
PRIORITY
PUT
QCOPY
QSTART
READ
READY
REDIRECT
RELEASEM
RETRIEVE
SCREEN

285
Macro expansion linkage to modules
I in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
L--------------------------------------(continued)
SEQUENCE
SETOF
SETSCAN
SIMATTEN
STARTLN
STARTMH
STOPLN
TCHNG
TCOPY
TERMINAL
TERRSET
TLIST
TPDATE
TPROCESS
TRANLIST
TSINPUT
TTABLE
UNLOCK
WRITE
Macro generation and conditional assembly
in ASSEMBLER (F)
21 GY26-3700
Macro instruction
in BASIC 'l'ELECOMM. ACCESS METHOD
30 GY30-2001
assembly
categories
in INTRO. TO CONTROL PROGRAM LOGIC 36 GY28-6605
ATTACH
EXCP
GETMAIN
LINK
LOAD
OPEN
SPIE
WAIT
XCTL
in JOB MANAGEMENT
36 GY28-6613
EXCP
GET
LOCATE
OBTAIN
READ
SCHEDULR
TTIMER
WTO
WTOR
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
EXTRACT
FREEMAIN
GETLINE
Macro Instruction Type Statements
in COBOL (F)
Procedure A-Text formats
Macro instructions
in CATALOG MANAGEMENT

24 GY28-6382
30 GY28-6606

CAMLST

CATALOG
INDEX
LOCATE
in COBOL (F)
ATTACH

24 GY28-6382

CALL

DEVTYPE
FREEMAIN
GETMAIN
LINK
XCTL
in FORTRAN IV (E)
in GRAPHIC SUBRTN. PACKAGE
Graphics Access Method (GAM)
operating system
used by GSP

25 GY28-6601
25 GY27-7152

Macro - Macro
in GRAPHICS ACCESS METHOD
in INDEXED SEQUEN. ACCESS METHOD
in INITIAL PROGRAM LOADER AND NIP
ALLOCATE
BLDL
LINK
LOCATE
OBTAIN
SYSGEN
XCTL
in PL/I SUBROUTINE LIBRARY
system
library
in QUEUED TELECOMM. ACCESS METHOD
list of
in TSO CATALOG MANAGEMENT
CAMLST
CATALOG
INDEX
LOCATE
in TSO COMMAND PROC VOL2-DELETE
EXTRACT
in TSO COMMAND PROC VOL4-LISTALC
EXTRACT
in TSO COMMAND PROC VOL4-LISTBC

30 GY27-7113
30 GY28-6618
36 GY28-6661

29 GY28-6801
30 GY30-2002
36 GY28-6745

36 GY28-6772
36 GY28-6774
36 GY28-6774

CLOSE

ENQUEUE
EXTRACT
LINK
LOAD
OPEN
READ
RETURN
in TSO COMMAND PROC VOL5-LISTDS
BLDL
CAMLST
CLOSE
DELETE
EXTRACT
FREEMAIN
GETMAIN
LOCATE
OBTAIN
OPEN
OPEN. type J
RDJFCB

36 GY28-6775

READ

in TSO COMMAND PROC VOL6-PROFILE
EXTRACT
IKJNAME
IKJRLSA
LINK
PUTLINE
generation of LINK macro by
issued by IKJEFT82
issued by PARSE
STCC
in TSO COMMAND PROC VOL6-RENAME
EXTRACT
in TSO COMMAND PROC VOL6-TERMINAL
EXTRACT
STATTN
STBREAK
STCLEAR
STSIZE
STTIMEOU
in TSO COMMAND PROCESSOR VOL1-ACCT
EXTRACT
STAE
STAI
in TSO COMMAND PROCESSOR VOLl-ADD
EXTRACT
in TSO COMMAND PROCESSOR VOL4-EXEC
ATTACH
DETACH
EXTRACT

36 GY28-6776

36 GY28-6776
36 GY28-6776

36 GY28-6771

36 GY28-6771
36 GY28-6774

Macro - Main

286

Macro instructions
I in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
L--------------------------------------(continued)
FIND
LINK
STAX
TCLEAR
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
EXTRACT
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
ATTACH
CALL
CHECK
CLOSE
DETACH
EXTRACT
GET LINE
FIND
GETMAIN
IKJTSMSG
LINK
LOAD
OPEN
READ
RETURN

STAX
SYNADAF
TCLEARQ
in TSO COMMAND PROCESSOR
EXTRACT
LINK
WTO
in TSO COMMAND PROCESSOR
as system interfaces
in TSO CONTROL PROGRAM
BSAM/QSAM
terminal status
used by subsystem
Macro instructions used
in TSO COMMAND PROCESSOR
in TSO COMMAND PROCESSOR
ATTACH
BLDL
CLOSE
EXTRACT

VOL6-SEND 36 GY28-6776

VOL6-TIME 36 GY28-6776
36 GY28-7199

VOL1-CHNG 36 GY28-6771
VOL2-CALL 36 GY28-6772

FREEMAIN

GETMAIN
LINK
OPEN
WAIT
Macro Instructions with Three Operands
in COBOL (E)
24
MACRO option
in PL/I (F) COMPILER
29
Macro parameter list
in JOB MANAGEMENT
36
construction of
format of
Macro references (TOTE)
in TCAM SERVICEABILITY AIDS
30
Macro-time routines
in INDEXED SEQUEN. ACCESS METHOD
30
Macro usage
in PL/I SYNTAX CHECKER PLM
29

GY24-5009
GY28-6800

CHECKER

debugging aids
GENERATE

36 GY30-2005

MAC020 routine
---rn-COBOL (F)

24 GY28-6382

Made labels
---rn FORTRAN IV (G) COMPILER

25 GY28-6638

Magnetic input control block (MICB)
in IBM 1419/1275 DEVICE DEP. BSAM
Magnetic tape devices
in INPUT/OUTPUT SUPERVISOR
in device table
UCB fields
use of DEB
for start I/O
volume statistics table

30 GY21-0012
30 GY28-6616

MAIL
---rn TSO COMMAND PROC VOL4-LISTBC
36
directory record
message record
messages
MAIL directory I/O parameter list
in TSO COMMAND PROC VOL1-BROADCAST 36
MAIL directory processing
in TSO COMMAND PROC VOL1-BROADCAST 36
addi tions to
changes to
control information for
deletions from
directory addressing
message chaining
performed by IKJEES40
termination of
use of SEND command
MAIL directory records
in TSO COMMAND PROC VOL1-BROADCAST 36
address buffer for
chaining of
I/O buffers for
processing of
MAIL message records
in TSO COMMAND PROC VOL1-BROADCAST 36
address buffers for
deletion of
I/O buffers (MSGAREA and MSGAREA2)
label buffers for
Mail records
in TSO COMMAND PROCESSOR VOL6-SEND 36

GY28-6774

GY2B-6771
GY28-6771

GY28-6771

GY28-6771

GY28-6776

GY28-6613

GY30-2027
GY28-6618
GY33-8009

Macros
---rn-EMULATOR FOR 7090/7094/709411
ATTACH
COM9
EMSRV
MOD88
TVEC9
in FORTRAN IV SYNTAX CHECKER PLM
BOMBR

system generation
in REMOTE JOB ENTRY
RJELINE
RJETABL
RJETERM
RJEUSER

35 GY27-7187

25 GY28-6831

MAIN (keyword attribute)
in PL/I SYNTAX CHECKER PLM
29
in OPTIONS attribute list
Main control program
in TSO COMMAND PROC VOL1-DELETE
36
Main control program (IKJEFA20)
in TSO COMMAND PROCESSOR VOLl-CHNG 36
Main control program module (IKJEFA10)
in TSO COMMAND PROCESSOR VOL1-ADD 36
Main CRJE task
in CRJE PLM
36
Main functions of syntax checker
in PL/I SYNTAX CHECKER PLM
29
Main-line processing operations
in TELECOMMUNICATION ACCESS METHOD 30
Main Logic Routine (IKASD082)
in GRAPHIC JOB PROCESSOR SUPPORT
36
chart
description of
example of use as GFX control

GY33-8009
GY28-6771
GY28-6771
GY28-6771
GY30-2011
GY33-8009
GY30-2029
GY27-·7159

287
Main Logic Routine (IKASD082)
I in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
I
example of use as GFX control
L--------------------------------------(continued)
routine
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
charts
description of
Main processing control section, IKJEE100
in TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6775
Main processor initialization-IEBPTPCH
in UTILITIES
32 GY28-6614
Main storage
in ASSEMBLER (F)
21 GY26-3700
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
allocation of, for GFX
allocation of, for GJP
dump of
during GJP operations
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
clearing
determining size limit
hierarchy support for 2361
resetting divisions
rounding size
setting storage key
unavailable
in INTRO. TO CONTROL PROGRAM LOGIC 36 GY28-6605
allocation of
contents of
divisions of
loading nucleus into
loading programs into
relation to data management
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
malfunctions
requirements
in MACHINE-CHECK HANDLER, S360 M85 31 GY27-7184
data failure
description
requirements of MCH/85
in MFT SUPERVISOR
36 GY27-7236
allocating
dynamic area
expanding
fixed area
freeing
partitions
system queue area
transient areas
in MVT SUPERVISOR
36 GY28-6659
purging of
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
OLT program use of
overlay usage of
in PL/I (F) COMPILER
29 GY28-6800
release of
requirements
in SORT/MERGE
33 GY28-6597
layout
requirement for various techniques
value in parameter list
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
protect key
required
in TSO COMMAND PROC VOL6-PROFILE
36 GY28-6776
dynamically acquired
message list residing in
released via FREEMAIN macro
required to load PROFILE
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
overlay of
requirements
release of PDL
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
displaying

Main - Main

obtaining for the Test program
obtaining for the tested program
in 7074 EMULATE FOR M/165
GY27-7228
buffers
communications region
data management access methods
emulator program
Main storage, allocation of
in 5/360 JOB PROCESSING 1130/2250 36 GY27-7166
for GFX
for SGJP in System/360
for SGJP in 1130
Main storage, requests for
in FORTRAN IV (H) COMPILER
25 GY28-6642
phase 10
phase 15
phase 20
Main storage (compile time use)
in ALGOL (F) COMPILER
26 GY33-8000
Main storage (object time use)
in ALGOL (F) COMPILER
26 GY33-8000
Main storage allocation
in FORTRAN IV (E)
25 GY28-6601
for branch list tables
for compiler
in LINKAGE EDITOR (F)
31 GY28- 6667
description of
release of
in LOADER
31 GY28-6714
Main storage allocation (core maps)
in PL/I SYNTAX CHECKER PLM
29 GY33- 8009
variant 1 (PLICHK20)
variant 2 (PLICHK27)
variant 3 (PLICHK16)
Main storage allocation table
in LINKAGE EDITOR (F)
31 GY28-6667
Main Storage Analysis
module
in MACHINE-CHECK HANDLER, S360 M85 31 GY27-7184
Main Storage Analysis module for the
Model 155
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
Main Storage Analysis module for the
Model 165
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
Main-storage destination queue
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
Main storage failure
in TSO CONTROL PROGRAM
36 GY28-7199
Main storage for DAIR18 parameter list
(DAIRPARM)
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
use of
Main storage hierarchy support
in CONTROL PROGRAM WITH MFT
36 GY27-7128
in JOB MANAGEMENT
36 GY28-6613
in LINKAGE EDITOR (F)
31 GY28-6667
in MFT SUPERVISOR
36 GY27-7236
in MVT JOB MANAGEMENT
36 GY28-6660
Main storage Hierarchy Support allocation
of
in MVT SUPERVISOR
36 GY28-6659
contents supervision service routines
with
description of
GETMAIN routine with
loading of overlay module with
Main storage initialization
in CONTROL PROGRAM WITH MFT
36 GY27-7128
Main-storage management
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Main storage map of subsystem
in TSO CONTROL PROGRAM
36 GY28-7199
Main-sto~age process queue
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
Main storage queuing

~

288

Main - Manipulation

Main storage queuing
L--------------------------------------(continued)
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Main storage queuing with disk
backup
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Main storage requirement
in TSO COMMAND PROC VOL1-DELETE
36 GY28-6771
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
Main storage requirements
in TSO COMMAND PROC VOL1-BROADCAST 36 GY28-6771
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY28-6772
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
in TSO COMMAND PROC VOL5-LISTCAT
36 GY28-6775
in TSO COMMAND PROC VOL6-RENAME
36 GY28-6776
in TSO COMMAND PROC VOL6-TERMINAL 36 GY28-6776
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
Main storage requirements .•
calculation of
in TSO CONTROL PROGRAM
36 GY28-7199
Driver
swap routines
TIOC
total subsystem
TSC
Main storage requirements for MCH
in MACHINE-CHECK HANDLER. M155/165 30 GY27-7198
Main Storage Scan module (IGFASR2D)
in MACHINE-CHECK HANDLER. S360 M65 31 GY27-7155
Main text scan and dictionary build
in ASSEMBLER (F)
21 GY26-3700
MAINGN-IEKTA
---rn-FORTRAN IV (H) COMPILER

25 GY28-6642

MAINGN2-IEKVM2
in FORTRAN IV (H) COMPILER

25 GY28-6642

Mainline control module (IKJEHAL1)
in TSO COMMAND PROC VOL4-LISTALC
flowcharts
operation
organization
Mainline module (IKJEGMNL)
in TSO COMMAND PROCESSOR VOL7-TEST
diagram of
flowcharts of
Test overall
Mainline
module description of
text description of
Mainline processing
in TSO COMMAND PROC VOL4-LISTBC
Mainline program
in TSO COMMAND PROC VOL5-0UTPUT
Mainline Sequence (FLOATING POINT and
EXPONENTIATION Generator)
in COBOL (E)
Mainline Sequence (MULTIPLY-DIVIDE
Generator)
in COBOL (E)

36 GY28-6774

36 GY28-6777

in COBOL (E)

24 GY24-5009

MAIR (Machine Analysis and Instruction Retry)
in MACHINE-CHECK HANDLER. S360 M65 31 GY27-7155
modules
theory
MAJMASK (major structure name mask)
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

Major CDE
in MVT SUPERVISOR
36 GY28-6659
Major changes; Summary of
in UTILITIES
32 GY28-6614
Major code
in COBOL (F)
24 GY28-6382
definition
Major Code of Data Attribute
in COBOL (E)
24 GY24-5009
Major command list
in CRJE PLM
36 GY30-2011
Major Components (ADD-SUBTRACT Generator)
in COBOL (E)
24 GY24-5009
Major Components (MULTIPLY-DIVIDE
Generator)
in COBOL (E)
24 GY24-5009
Major functions
in TSO COMAND PROC VOL2-CNCL/STATUS36 GY28-6772
Major QCB
in MVT SUPERVISOR
36 GY28-6659
Major structure
in COBOL-TO-PL/l LCP
29 GY33-7007
Major structure name
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
Major task
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
defined
end
EVENT variable
ini tialization
PRV VDA (allocation)
TASK variable
Major time slice
in TSO CONTROL PROGRAM
36 GY28-7199
"Making copies"
in UTILITIES

32 GY28-6614

Malfunction alert handler
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
Malfunctions, types of hardware
in MACHINE-CHECK HANDLER. M135/145 30 GY27-7237
36 GY28-6774
36 GY28-6775
24 GY24-5009
24 GY24-5009

MAINPRO
in ALGOL-To-PL/l LCP
in FORTRAN IV-TQ-PL/1 LCP

29 GY33-7006
29 GY33-7000

Maintenance control word
in ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

MAINl
in COBOL (E)

24 GY24-5009

Management
in PL/I SUBROUTINE LIBRARY
module UHESAP)
program
storage
Manager, transient
in ONLINE TEST EXECUTIVE PROGRAM
Manipulation
in FORTRAN IV (E)
of compile-time data sets
of object-time I/O devices
of text buffer chains

29 GY28-6801

37 GY28-6651
25 GY28-6601

subject listed below, refer to other
publications listed for the same subject in
the Master Index.
in TSO COMMAND PROC VOL4-LISTALC
36 GY28-6774
in TSO COMMAND PROC VOL4-LISTBC
36 GY28-6774
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774

289
Manual Master Index. order No. GY28-6717.
For additional information about any
Manuals
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
Manuals. related
in TSO COMMAND PROC VOL5-LISTCAT
36 GY28-6775
Map
25
in FORTRAN IV (G) COMPILER
of scalars
storage
Map. editor storage
in TESTRAN
37
llessage handling routines functions
of
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029

294
incoming group of an MH
outgoing group of an MH
STARTMH
user interface routine
Message handling with time sharing
option support
in TELECOMMUNICATION ACCESS METHOD
Message header
in TELECOMMUNICATION ACCESS METhOD
Message identification
in TESTRAN
Message insertions
in PL/I SYNTAX CHECKER PLM
Message length table
in FORTRAN IV (E)
Message level options
in MVT JOB MANAGEMENT
Message limit routine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
Message Lists for
in TSO CONTROL PROGRAM
Background Reader
IKJEFLC (IKJEFLCM)
IKJEFLG (IKJEFLGH)
IKJEFLGM (IKJEFLGN)
IKJEFLL (IKJEFLLM)
Logon Prompter (IKJEFLGM)
Trace Writer (IKJFAMSG)
Message mode routine
in QUEUED TELECOMM. ACCESS METHOD
chart
Message module
in TSO CO~~ND PROC VOL1-BROADCAST
Message Module (IKAMERRO)
in s/360 JOB PROCESSING 1130/2250
description of
format of
Message module (IKJEFF03)
in TSO COMMAND PROC VOL6-SUBMIT
Message Module (SGMSG)
in S/360 JOB PROCESSING 1130/2250
Message modules
in ONLINE TEST EXECUTIVE PROGRAM
Message numbers-IEBCOMPR
in UTILITIES
Message origins and codes
in TCAM SERVICEABILITY AIDS
Message origins table
in TELECOMMUNICATION ACCESS METHOD
Message Parameters
in COBOL (F)
E-Text format
Message Pool
in ALGOL (F) COMPILER
Message processing-IEBDG
in UTILITIES
Message processing-IEBPTPCH
in UTILITIES
Message processing operational flow
in QUEUED TELECOMM. ACCESS METHOD
Message processing program
in PL/I SUBROUTINE LIBRARY
in QUEUED TELECOMM. ACCESS METHOD
assembling
contents of
ini tializing
linkage editing
routines
Message processor
in TSO COMMAND PROC VOL5-0UTPUT

30 GY30-2029
30 GY30-2029
37 GY28-6611
29 GY33- 8009
25 GY28- 6601
36 GY28-6660
30 GY30-2029

36 GY28-7199

30 GY30-2002
36 GY28-6771
36 GY27-7166

36 GY28-6776
36 GY27-7166
37 GY28-6651
32 GY28-6614
30 GY30-2027
30 GY30-2029
24 GY28-6382
26 GY33-8000
32 GY28-6614
32 GY28-6614
30 GY30-2002
29 GY28-6801
30 GY30-2002

36 GY28-6775

295
Message processor routine (IKJEFF02)
in TSO COMMAND PROC VOL6-SUBMIT
Message queue data set
in TCAM SERVICEABILITY AIDS
Message queues close routine
in TELECOMMUNICATION ACCESS METHOD
Message queuing options
in TELECOMMUNICATION ACCESS METHOD
main storage queuing
nonreusable disk queuing
reusable disk queuing
Message retrieval
in TELECOMMUNICATION ACCESS METHOD
QTAM
TCAM
Message retrieval for an application
program
in TELECOMMUNICATION ACCESS METHOD
Message routine
in JOB MANAGEMENT
Message Routine (IKDMSG)
in S/360 JOB PROCESSING 1130/2250
chart
description of
Message routine codes
in JOB MANAGEMENT
Message scan routine
in REMOTE JOB ENTRY
Message section (IKJEHMSG)
in TSO COMMAND PROC VOL2-DELETE
Message segment
in TELECOMMUNICATION ACCESS METHOD
in TSO COMMAND PROCESSOR VOL6-TIME
Message segment list (SEGLIST)
in TSO COMMAND PROC VOL6-PROFILE
description of fields
illustration of
pointer to
Message segment size
in PL/I SUBROUTINE LIBRARY
Message segments
in TSO COMMAND PROC VOL5-0PERATOR
addresses of
number of
Message selection routine
in TSO COMMAND PROCESSOR VOL3-EDIT
Message table
in MACHINE-CHECK HANDLER, M135/145
Message Table (IIOMSTAB), function of
in 7074 EMULATE FOR M/165
Message table format
in EMULATOR FOR 7090/7094/7094I1
Message task
in PL/I SUBROUTINE LIBRARY
Message task, initialization
in PL/I SUBROUTINE LIBRARY
Message text, index in COMBUF to
in TSO COMMAND PROC VOL5-0PERATOR
Message text table
in FORTRAN IV (E)
Message to module
cross-reference
in FORTRAN IV (G) COMPILER
Message type routine
in QUEUED TELECOMM. ACCESS METHOD
chart
Message writer
in CRJE PLM
flowchart
function
MCS
messages requested
microfiche directory
module description
out of space
register usage

36 GY28-6776
30 GY30-2027
30 GY30-2029
30 GY30-2029

30 GY30-2029

30 GY30-2029
36 GY28-6613
36 GY27-7166

36 GY28-6613
36 GY30-2005
36 GY28-6772
30 GY30-2o.29
36 GY28-6776
36 GY28-6176

29 GY28-6801
36 GY28-6775

36 GY28-6773
30 GY27-7237
GY27-7228
35 GY27-7187
29 GY28-6801
29 GY28-6801
36 GY28-6775
25 GY28-6601
25 GY28-6638
30 GY30-2002
36 GY30-2011

Messaqe

Messages

SEND cOlllllland
Message Writer (IIOMSGWR)
in 7074 EMULATE FOR M/165
GY27-7228
flowchart
functions
handling messages
MOD
Message Writer routine (IITMWR)
in EMULATOR FOR 7090/7094/7094II
35 GY27-7187
description
flowchart
Message 1 userid extension, index to
in TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6775
MESSAGEP, in EXITPARM
in TSO COMAND PROC VOL2-CNCL/STATUS36 GY28-6772
Messages
in CRJE PLM
36 GY30-2011
central
delayed
queued
terminal
in EMULATOR FOR 7090/7094/7094II
35 GY27-7187
basic halt
error
emulator program
tape formatting programs
issuing
log of
outstanding
in FORTRAN IV (E)
25 GY28-6601
compile-time generation of
object-time generation of
in FORTRAN IV (G) COMPILER
25 GY28-6638
description
location in storage
printing of (IEYPRNT)
produced by Allocate
produced by Invocation
produced by Parse
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
displaying
internal error
job definition
origin of
system operator, writing to
table of
translating System Message Block
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
inoperative path message
I/O supervisor
uncorrectable input/output message
1052 error rOlltine
1442, 2501, and 2520 error routines
2250 error routine
2260 and 1053 error routines
2301, 2302, 2303, 2305, 2311~ 2314,
2321, and 3330 error routines
in JOB MANAGEMENT
36 GY28-6613
dismount
prograllllller
in LINKAGE EDITOR (F)
31 GY28-6667
in MACHINE-CHECK HANDLER, S360 M85 31 GY27-7184
cross-referenced with
modules
scheduling
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
as error information
console
issued by OLTEP
with information from the OLT programs
origination of (tabular)
suffix codes
in PL/I (F) COMPILER
29 GY28-6800
classification
control routines
diagnostic

OJ

Messages - Method
Messages
I in PL/I (F) COMPILER
29 GY28-6800
l--------------------------------------(continued)
dictionary chain
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
internal' error
job completion
job definition
composition of
table of
origin of
system Message Blocks
system operator, writing to
table of
in SORT/MERGE
33 GY28-6597
in TSO COMAND PROC VOL2-CNCL/STATUS36 GY28-6772
in TSO COMMAND PROC VOL1-BROADCAST 36 GY28-6771
in TSO COMMAND PROC VOL1-SUBRTNS
36 GY28-6771
in TSO COMMAND PROC VOL4-LISTALC
36 GY28-6774
first level
handling
second level
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
list of
standard handling of
types
in TSO COMMAND PROC VOL5-0UTPUT
36 GY28-6775
in TSO COMMAND PROC VOL6-PROFILE
36 GY28-6776
buffers
COMMAND IGNORED
in message list
when issued
handling of
list
overlay CSECT (PROFMSGS)
segment list
in TSO COMMAND PROC VOL6-RENAME
36 GY28-6776
diagnostic
informational
prompting
types
in TSO COMMAND PROC VOL6-WHEN/END 36 GY28-6776
module description
module flow chart
text
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
diagrams
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
handling
routine, flowchart
text
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
handling
.mode
module
processing
second level
text
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
handling
issued
types
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
DAIR failure
handling
termination
warning
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
Messages" error
in FORTRAN IV (H) COMPILER
25 GY28-6642
after phase 25
phase 30 processing of
Messages, service aids
in TCAM SERVICEABILITY AIDS
30 GY30-2027

296
Messages and ABEND codes
in FORTRAN IV (G) COMPILER
Messages by module
in TSO COMMAND PROC VOL6-SUBMIT
Messages for data transmission
in S/360-1130 DATA TMN. - FORTRAN
asynchronous routine
ended
asynchronous routine
request
data
initialization
program termination
request
ready-to-read
terminate communication
link
Messages generated by sUbsystem
in TSO CONTROL PROGRAM
Messages issued by
in TSO TMP & SERVICE ROUTINES
Default service routine
Parse service routine
PUTGET service routine
PUTLINE service routine
Terminal Monitor Program
MESS BUFF (error message buffer)
in PL/I SYNTAX CHECKER PLM
debugging hints for
error identification number
in DATAAREA DSECT
input line number
pointer to (MBUFFP)

25 GY28-6638
36 GY28-6776
25 GY27-7161

36 GY28-7199
36 GY28-6770

29 GY33-8009

MESSLOOP
in COBOL-TQ-PL/l LCP

29 GY33-7007

META, METB, METC
in ASSEMBLER (F)

21 GY26-3700

Metalanguage
in FORTRAN IV SYNTAX CHECKER PLM
25 GY28-6831
assembler language equivalent for
definition of
elements of
extended concept of
functions of
operators of
META 3
in ASSEMBLER (F)

21 GY26-3700

METC4
in ASSEMBLER (F)

21 GY26-3700

Method of operation
in PL/I SYNTAX CHECKER PLM
29
in S/360 JOB PROCESSING 1130/2250 36
single SGJP application
concurrent SGJP
applications
in TELECOMMUNICATION ACCESS METHOD 30
in TSO COMAND PROC VOL2-CNCL/STATUS36
in TSO COMMAND PROC VOL1-DELETE
36
diagrams
introduction to diagrams
symbols used in diagrams
summary
in TSO COMMAND PROC VOL2-ALLOCATE 36
diagrams
summary
symbols used on diagrams
in TSO COMMAND PROC VOL5-0UTPUT
36
in TSO COMMAND PROC VOL6-PROFILE
36
description

GY33-8009
GY27-7166

GY30-2029
GY28-6772
GY28-6771

GY28-6772

GY28-6775
GY28-6776

297

Method - Microfiche

Method of operation

searching a UADS tree structure
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
list of
philosophy of
symbols used
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
(for specific diagrams,
in 7074 EMULATE FOR M/165
GY27-7228

l __ ~~_:~~-:~~~~~-~~~:-~~~~=~~~:~~~---:~c~~~~~~~~~
diagrams
in TSO COMMAND PROC VOL6-PROTECT
36
diagrall)S
general information
symbols used
in TSO COMMAND PROC VOL6-SUBMIT
36
in TSO COMMAND PROC VOL6-TERMINAL 36
diagrams
introduction to the diagrams
organization of the diagrams
symbols used in the diagrams
TERMINAL command processor summary
in TSO COMMAND PROC VOL6-WHEN/END 36
method of operation diagrams
in TSO COMMAND PROCESSOR VOL1-ACCT 36
in TSO COMMAND PROCESSOR VOL1-CHNG 36
organization
terminology
in TSO COMMAND PROCESSOR VOL2-CALL 36
in TSO COMMAND PROCESSOR VOL4-EXEC 36
diagrams
text
use of diagrams
in TSO COMMAND PROCESSOR VOL4-FREE 36
diagrams
in TSO COMMAND PROCESSOR VOL6-RUN 36
description
diagrams
symbolic conventions
in TSO COMMAND PROCESSOR VOL6-SEND 36
diagrams
summary
Method of operation, description
in TSO COMMAND PROC VOL4-LISTBC
36
Method of operation diagram
in TSO COMMAND PROC VOL4-LISTBC
36
in TSO COMMAND PROCESSOR VOL6-TIME 36
organization of
use of
Method of operation diagrams
in TSO COMMAND PROC VOL1-BROADCAST 36
for IKJEES40
for IEEVSDIO
in TSO COMMAND PROC VOL1-SUBRTNS
36
FREESPACE subroutine
GETS PACE subroutine
Read subrourine
Write subroutine
in TSO COMMAND PROC VOL2-DELETE
36
diagrams
introduction to
organization of
symbols used
in TSO COMMAND PROC VOL4-LISTALC
36
in TSO COMMAND PROC VOL5-LISTCAT
36
in TSO COMMAND PROC VOL5-LISTDS
36
for LISTDS functions
introduction
symbols
in TSO COMMAND PROC VOL6-RENAME
36
location
organization of
symbols in
uses
in TSO COMMAND PROCESSOR VOL1-ADD 36

GY28-6776

GY28-6776
GY28-6776

MEXIT

---rn

ASSEMBLER (F)
MEXIT label
in TSO COMMAND PROCESSOR VOL6-RUN
in flowchart

GY28-6776
GY28-6771
GY28-6771
GY28-6772
GY28-6774

GY28-6774
GY28-6776

GY28-6776

GY28-6774
GY28-6774
GY28-6776

GY28-6771

MFLPT
in COBOL (E)

21 GY26-3700
36 GY28-6776

24 GY24-5009

MFT
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
in glossary
with respect to OLTEP
MFT (multiprogramming with a fixed number
of tasks>
in 7074 hMULATE FOR M/165
GY27-7228
MFT subtasking
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
MFT system Analysis 1
in MACHINE-CHECK HANDLER, S360 M85 31 GY27-7184
MFT System Analysis 1, IGFMFTFl
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
flowchart
module description
MFT System Analysis 2
in MACHINE-CHECK HANDLER, S360 M85 31 GY27-7184
MFT System Analysis 2, IGFMFTF2
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
flowchart
module description
MFT system Analysis 3
in MACHINE-CHECK HANDLER, S360 M85 31 GY27-7184
MFT System Analysis 3, IGFMFTF3
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
flowchart
module description

GY28-6771
in FORTRAN IV (H) COMPILER
MGR30
in COBOL (E)

25 GY28-6642
24 GY24-5009

GY28-6772

GY28-6774
GY28-6775
GY28-6775

GY28-6776

GY28-6771

MH cancel message function
in TELECOMMUNICATION ACCESS METHOD
MH hold function
in TELECOMMUNICATION ACCESS METHOD
MH incoming group
in TELECOMMUNICATION ACCESS METHOD
MH initiate function
in TELECOMMUNICATION ACCESS METHOD
MH lock function
in TELECOMMUNICATION ACCESS METHOD
MH macro expansion parameter lists
in TELECOMMUNICATION ACCESS METHOD
MH outgoing group
in TELECOMMUNICATION ACCESS METHOD
MH routines
in TELECOMMUNICATION ACCESS METHOD

30 GY30-2029
30 GY30-2029
30 GY30-2029
30 GY30-2029
30 GY30-2029
30 GY30-2029
30 GY30-2029
30 GY30-2029

purpo~e

organization
how to use
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771
formatting data requested
LIST processing summary
mapping userids
parsing the LIST command

MICB
in IBM 1419/1275 DEVICE DEP. BSAM
Microfiche card
in PL/I SYNTAX CHECKER PLM
as reference
number in directory

30 GY21-0012
29 GY33-8009

G1

Microfiche - Mode
directory
FORTRAN IV (il) COMPILER
FORTRAN IV SYNTAX CHECKER PLM
LINKAGE EDITOR (F)
LOADER
S/360 JOB PROCESSING 1130/2250
S/360-1130 DATA TMN. - FORTRAN
TELECOMMUNICATION ACCESS METHOD
TSO COMMAND PROC VOL1-DELh~E

298

~ricrofiche

in
in
in
in
in
in
in
in

Mid-point of dictionary chain
in FORTRAN IV (H) COMPILER
MIN parameter
in INITIAL PROGRAM LOADER AND NIP

25
25
31
31
36
25
30
36

GY28-6642
GY28-6831
GY28-6667
GY28-6714
GY27-7166
GY27-7161
GY30-2029
GY28-6771

25 GY28-6642
36 GY28-6661

Minimum initiator region size (BAMINPAR)
in MVT JOB MANAGEMENT
36 GY28-6660
Minimum job step region size (BAMIPAR2)
in MVT JOB MANAGEMENT
36 GY28-6660
Minimum system configuration
in FORTRAN IV (G) COMPIL~R
25 GY28-6638
MINMASK (minor structure name mask)
in PL/I SYNrAX CHECKER PLM
Minor
in
Minor
in

CDE
MVT SUPERVISOR
code
COBOL (F)
definition
Minor Code of Data Attribute
in COBOL (E)
Minor load, tape or card
in 7074 EMULATE FOR M/165
Minor loaded program request block
(LPRB)
in MFT SUPERVISOR
Minor QCB
in MVT SUPERVISOR
Minor structure
in COBOL-TO-PL/1 LCP
Minor structure name
in PL/I SYNrAX CHECKER PLM
Minor time slice
in TSO CONTROL PROGRAM
MINSTR
in ASSEMBLER (F)
Minus passive line
FORTRAN IV SYNTAX CHECKER PLM
effect on source pointer
references to
scan of
Minus passive line operator
in FORTRAN IV SYNTAX CHECKER PLM
Minus sign (-)
in PL/I SYNTAX CHECKER PLM

---rn

Misaligned
in PL/I
Misaligned
in PL/I

argument
(F) COMPILER
operands
(F) COMPILER

Miscellaneous control program
interfaces
in PL/I SUBROUTINE LIBRARY
Miscellaneous Generator
in COBOL (E)
MISCSWCH
in EMULATOR FOR 7090/7094/709411
Missing address marker-ATLAS
in UTILITIES

Missing address marker-IEHATLAS
in UTILITIES
Missing DD statement-IEBTCRIN
in UTILI TIES
Mixed-density tapes, handling
EMULATOR FOR 7090/7094/709411
tape postprocessor
tape preprocessor
Mixed overlay defining
in PL/I (F) COMPILER
Mixed-parity tapes
in EMULATOR FOR 7090/7094/709411
identification in DEB
retrying in alternate parity

---rn

32 GY28-6614
32 GY28-6614
35 GY27-7187

29 GY28-6800
35 GY27-7187

MLFLG, field in CFLAGS
TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

---rn

MLITS
in GRAPHIC SUBRTN. PACKAGE

25 GY27-715'2

MLPEO
in GRAPHIC SUBRTN. PACKAGE

25 GY27-7152

MLOO, ML01, MLOIA, MLOIB, ML03
in ASSEMBLER (F)

21 GY26-3700

ML05, MLI0, ML11
in ASSEMBLER (F)

21 GY26-3700

29 GY33-8009
36 GY28-6659
24 GY28-6382

field in E01DATDF
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774

~~NAMAR

24 GY24-5009
GY27-7228
36 GY27-7236

MNINC switch
in ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

MNOTE
in ASSEMBLER (F)

21 GY26-3700

MNOTST
---rn-ASSEMBLER (F)

21 GY26-3700

36 GY28-6659
29 GY33-7007
29 GY33-8009
36 GY28-7199
21 GY26-3700
25 GY28-6831

28 GY28-6831
29 GY33-8009
29 GY28- 6800
29 GY28-6800

29 GY28-6801
24 GY24-5009

in TSO COMMAND PROC VOL4-LISTBC
MO diagrams
in TSO COMMAND PROC VOL2-DELETE
MOD data set
--in TSO COMMl',ND PROC VOL2-ALLOCA,['E
MOD data set status
in TSO COMMAND PROCESSOR VOL4-EXEC
MOD parameter
in INITIAL PROGRAM LOADER AND NIP
MOD record
in LOADER
contents of
input convention
processing
processor (IEWLMOD)
flowchart of
synopsis of
record format

36 GY28-6774
36 GY28-6772
36 GY28-6772
36 GY28-6774
36 GY28-6661
31 GY28-6714

MODCOLl
in COBOL-TO-PL/l LCP

29 GY33-7007

MOD~S
~n

36 GY28-6772

subroutine
TSO COMMAND PROC VOL2-ALLOCATE
flowcharts
function
operation

35 GY27-7187
32 GY28-6614

Mode
---rn FORTRAN IV (H) COMPILER
25 GY28-6642
in MACHINE-CHECK HANDLER, S360 M85 31 GY27-7184

299
Mode
L--------------------------------------(continued)
in MVT JOB MANAGEMENT
36 GY28-6660
count
recording
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
expression
register for (ARRF)
subscript
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
convers ational
initiate
message
priority
in SORT/MERGE
33 GY28-6597
Mode, automatic switching of
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
Mode, operating
1n TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
command, from TMP
subcommand, from command processor
MODE command
36 GY27-7128
in CONTROL PROGRAM WITH MFT
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
in MACHINE-CHECK HANDLER, S360 M85 31 GY27-7184
in MVT JOB MANAGEMENT
36 GY28-6660
Mode conversions
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Mode field in status mode word
in FORTRAN IV (H) COMPILER
25 GY28-6642
Mode handling for the Model 145
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
Mode of EDIT operation
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
Edit
establishment of
Input
Mode of operation
in COBOL (F)
24 GY28-6382
Mode set/file mask byte
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
Mode switching
in MACHINE-CHECK HANDLER, S360 M85 31 GY27-7184
Mode/type field
in FORTRAN IV (E)
25 GY28-6601
in dictionary
in intermediate text
Model-dependent common area
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
in MACHINE-CHECK HANDLER, S360 M85 31 GY27-7184
Model Independent Common Area
in MACHINE-CHECK HANDLER, S360 M85 31 GY27-7184
Model 1419
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
Model 165 Display Console
in MFT SUPERVISOR
36 GY27-7236
Model 195 Display Console
in MFT SUPERVISOR
36 GY27-7236
Model 85 CRT Display
in MFT SUPERVISOR
36 GY27-7236
Model 85 operator console with CRT display
support
in MVT SUPERVISOR
36 GY28-6659
Model 91
in MVT SUPERVISOR
36 GY28-6659
Decimal Simulator routines
program check First-Level Interruption
Handler routine for
description of
flowchart of
SERl routine for
description of
flowchart of
module name for
in PL/I SUBROUTINE LIBRARY
29 GY28-6801

Mode - Modify

condition list
interrupts, implementation
diagnostic messages
flush instructions
interrupt count
ONCOUNT built-in function
Model 91 Display Console
in MFT SUPERVISOR
Model 91 modifications
in TESTRAN
MODELEN, field in MODESEG
in TSO COMMAND PROC VOL5-0PERATOR
MODELID
in INITIAL PROGRAM LOADER AND NIP
MODEOFF, field in MODESEG
in TSO COMMAND PROC VOL5-0PERATOR

36 GY27-7236
37 GY28-6611
36 GY28-6775
36 GY28-6661
36 GY28-6775

Modes, control of

---rn
MACHINE-CHECK
Modes, operating

HANDLER, M135/145 30 GY27-7237

in EMULATOR FOR 7090/7094/709411
Modes of operation
in TSO COMMAND PROCESSOR VOLI-ADD
Modes of recovery operation
in MACHINE-CHECK HANDLER, M135/145
MODESEG
in TSO COMMAND PROC VOL5-0PERATOR
data area
in directory

35 GY27-7187

30 GY27-7237

MODFIX-IEKQMF
---rn-FORTRAN IV (H) COMPILER

25 GY28-6642

36 GY28-6771

36 GY28-6775

Modification Level 1 text
in ALGOL (F) COMPILER
Modification Level 2 text
in ALGOL (F) COMPILER
Modification mask (DCB)
in FORTRAN IV (G) COMPILER
Modification of compiler modules
in FORTRAN IV (E)
Modification of intermediate text
in FORTRAN IV (E)
for arithmetic expressions
for computed GO TO statements
for DEFINE FILE statements
for I/O statements
for RETURN statements
Modification routines
in SORT/MERGE

33 GY28- 6597

Modifier fields
in TESTRAN

37 GY28-6611

MODIFY central command
---rn-CRJE PLM
MODIFY command
in CONTROL PROGRAM WITH MFT
in MVT JOB MANAGEMENT
execution of
use of
Modify intense routine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
MODIFY operator control command
in TCAM SERVICEABILITY AIDS
Modify options routine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart

26 GY33-8000
26 GY33- 8000
25 GY28-6638
25 GY28-6601
25 GY28-6601

36 GY30-2011
36 GY27-7128
36 GY28-6660

30 GY30-2029

30 GY3o- 2027
30 GY30-2029

m

300

Modify - Module

Modify options routine
I in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
L--------------------------------------(continued)
library
microfiche directory
module description
register usage
Modify poll routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
MODIFY TS (operator command)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
MODIFY TSO command
in TSO CONTROL PROGRAM
36 GY28-7199
parameters
invalid
valid
processing of
Modifying output records-IEBDG
in UT!LIT IES
32 GY28-6614
Modifying system control data
in UTILITIES
32 GY28-6614
MODLMAXP, in routine directory
in TSO COMMAND PROCESSOR VOL1-ADD
MODs (method of operation
diagrams)
in 7074 EMULATE FOR Ml165
MODS statement
in SORT/MERGE
Modular configuration
in PL/I SYNl'AX CHECKER PLM
Modular hierarchy
in PL/I SYNl'AX CHECKER PLM
Modular linkage
in PL/I SUBROUTINE LIBRARY
record I/O
stream I/O
in PL/I SYNTAX CHECKER PLM
debugging hints for
Modular program structure
in ONLINE TEST EXECUTIVE PROGRAM
Module
--rnLINKAGE EDITOR (F)
.origin
structure
in MACHINE-CHECK HANDLER, M135/145
directory
loader
loading
scheduler
in MACHINE-CHECK HANDLER, S360 M65
comnunication
directory
flow
model-dependent (MAIR)
operation
system-dependent (PDAR)
transient
in PL/I"SUBROUTINE LIBRARY
alignment
compatibility
lengths-location
linkage
in SORT/MERGE
block/deblock
build
classifications of

36 GY28-6771

GY27-7228
33 GY28-6597
29 GY33-8009
29 GY33-8009
29 GY28-6801
29 GY33-8009
37 GY28-6651
31 GY28-6667
30 GY27-7237

31 GY27-7155

29 GY28-6801

33 GY28-6597

DCB, lOB
directory
equals
extract
interface list
list
map
names, format of
object
phase control
read/write
sort
in TESTRAN
load
object
root
source
in TSO COMMAND PROC VOL5-LISTCAT
descriptions
directory
relationships
in TSO COMMAND PROC VOL5-LISTDS
directory
hierarchy
in TSO COMMAND PROCESSOR VOL4-EXEC
organization
summary
in TSO COMMAND PROCESSOR VOL6-RUN
directory
hierarchy information
Module--CsECT cross-reference table
in LINKAGE EDITOR (F)
Module, load
in TSO COMMAND PROC VOL2-ALLOCATE
Module attributes
in LINKAGE EDITOR (F)
in TELECOMMUNICATION ACCESS METHOD
Module charts
in TSO COMMAND PROC VOL6-RENAME
directory of
IKJEHCIR
IKJEHDEF
IKJEHREN
Module common return point in MCH
Resident Nucleus
in MACHINE-CHECK HANDLER, 5360 M85
Module control table
in ONLINE TEST EXECUTIVE PROGRAM
description of
discussion of
illustration of
use of
Module-CSECT cross reference table
in FORTRAN IV SYNTAX CHECKER PLM
Module description
in GRAPHIC SUBRTN. PACKAGE
in PL/I SYNTAX CHECKER PLM
Module descriptions
in TSO COMMAND PROC VOL6-SUBMIT
in TSO COMMAND PROCESSOR VOL1-ADD
in TSO COMMAND PROCESSOR VOL6-SEND
Module directory
in GRAPHIC SUBRTN. PACKAGE
in MACHINE-CHECK HANDLER, s360 M85
in ONLINE TEST EXECUTIVE PROGRAM
in S/360-1130 DATA TMN. - FORTRAN
in TSO COMMAND PROC VOL1-BROADCAST
in TSO COMMAND PROC VOL1-DELETE
in TSO COMMAND PROC VOL2-ALLOCATE
in TSO COMMAND PROC VOL2-DELETE
in TSO COMMAND PROC VOL4-LISTALC
in TSO COMMAND PROC VOL6-PROTECT
in TSO COMMAND PROCESSOR VOL1-ACCT
in TSO COMMAND PROCESSOR VOL1~LIST
in TSO COMMAND PROCESSOR VOL4-HELP
in TSO COMMAND PROCESSOR VOL6-SEND

37 GY28-6611

36 GY28-6775

36 GY28-6775
36 GY28-6774
36 GY28-6776

31 GY28-6667
36 GY28-6772
31 GY28-6667
30 GY30-2029
36 GY28-6776

31 GY27-7184
37 GY28-6651

25 GY28-6831
25 GY27-7152
29 GY33-8009
36 GY28-6776
36 GY28-6771
36 GY28-6776
25
31
37
25
36
36
36
36
36
36
36
36
36
36

GY27-7152
GY27-7184
GY28-6651
GY27-7161
GY28-6771
GY28-6771
GY28-6772
GY28-6772
GY28-6774
GY28-6776
GY28-6771
GY28- 6771
GY28-6774

GY28-677~

301
Module flow diagrams
25
in ~~RTRAN IV (G) COMPILER
Module functions (summary)
in FORTRAN IV (G) COMPILER
25
Module functions-IEBCOMPR
32
in UTILITIES
Module hierarchy
in TSO COMMAND PROCESSOR VOL4-FREE 36
MODULE in DATAAREA DSECT
in PL/I SYNTAX CHECKER PLM
29
Module Initialization Routine of the
MCH Resident Nucleus
in MACHINE-CHECK HANDLER, S360 M85 31
Module linkage
in SEQUENTIAL ACCESS METHODS
30
Module list by library
in TELECOMMUNICATION ACCESS METHOD 30
Module Loader routine of the MCR
Resident Nucleus
in MACHINE-CHECK HANDLER, S360 M85 31
~Jodule loading
in MACHINE-CHECK HANDLER, M155/165 30
Module map
in LINKAGE EDITOR (F)
31
Module name
25
in GRAPHIC SUBRTN. PACKAGE
Module name index for RJE
in REMOTE JOB ENTRY
36
Module names
36
in CRJE PLM
in PL/I SUBROUTINE LIBRARY
29
in S/360-1130 DATA TMN. - FORTRAN 25
as identification
listed for Systeml360
listed for 1130
in TSO COMMAND PROC VOL4-LISTBC
36
in TSO COMMAND PROCESSOR VOL4-HELP 36
Module names/aliases
in PL/I SUBROUTINE LIBRARY
29
iModule pointers
in SEQUENTIAL ACCESS METHODS
30
Module Scheduling Routine of the MCH
Resident Nucleus
in MACHINE-CHECK HANDLER, S360 M85 31
Module selector tables
in SEQUENTIAL ACCESS METHODS
30
appendages
Check modules
Close executors
control modules
control modules selected and loaded
Open executor
chained scheduling
ordinary
track overflow
Get modules
exchange buffering
simple buffering
update mode
Open executors
stage 1
stage 2
stage 3
Put modules
exchange buffering
simple buffering
Read/Write modules
SETPRT executors
synchronizing and error processing
modules
track overflow asynchronous error
processing
Module summaries
in PL/I SUBROUTINE LIBRARY
29
.Module summary
in TSO COMMAND PROCESSOR VOLI-ADD 36

GY28-6638
GY28-6638
GY28-6614
GY28-6114
GY33-8009
GY27-1184
GY28-6604
GY30-2029
GY27-1184
GY27-1198
GY28-6667
GY21-1152
GY30-2005
GY30-2011
GY28-6801
GY27-1161

GY28-6114
GY28-6114
GY28-6801
GY28-6604
GY21-1184
GY28-6604

by

GY28-6801
GY28-6111

Module - Modules
Module table
in CRJE PLM
Module to ABEND
cross-reference
in FORTRAN IV (G) COMPILER
Module to message
cross-reference
in FORTRAN IV (G) COMPILER
Module usage
in PL/I SUBROUTINE LIBRARY
Modules
in DIRECT ACCESS DEVICE SPACE MGT.
Allocate routine
DADSM
Extend routine
LSPACE routine
Obtain routine
Protect routine
Release routine
Rename routine
Scratch routine
in GRAPHICS PROBLEM ORIENTED RTNS.
IFFPBAPR
IFFPDAPL
IFFPEAGR
IFFPFAVA
IFFPGAAR
IFFPGAVP
IFFPHALA
IFFPIAPG
IFFPJAPV
IFFPPASG
in INDEXED SEQUEN. ACCESS METHOD
check
dynamic buffering
IGG01920
IGG01921
IGG01922
IGG01924
IGG01928
IGG01929
IGG0192A
IGG0192B
IGG0192C
IGG0192D
IGG0192E
IGGOl92F
IGG0192G
IGG0192H
IGG0192I
IGG0192J
IGG0192K
IGG0192L
IGGOl92M
IGG0192N
IGGOl920
IGG0192P
IGG0192Q
IGG0192R
IGG0192S
IGG0192T
IGG0192U
IGG0192V
IGGOl92W
IGG0192X
IGG0192Z
IGG01950
IGG0195D
IGG0195G
IGG0195T
IGG0195U
IGG0196D
IGG0196G
IGG019GO
IGG019G1
IGG019G2

36 GY30-2011
25 GY28-6638
25 GY28-6638
29 GY28-6801
30 GY28-6601

30 GY21-7110

30 GY28-6618

Modules - Modules

Modules
I in INDEXED SEQUEN. ACCESS METHOD
30 GY28-6618
L--------------------------------------(continued)
IGG019G3
IGG019G4
IGG019G5
IGG019G6
IGG019G7
IGG019G8
IGGO19 G9
IGG019GA
IGG019GB
IGG019GC
IGG019GD
IGG019GE
IGG019GF
IGG019GL
IGG019GM
IGG019GN
IGGO 19 GO
IGG019GV
IGGO19 GW
IGG019GX
IGG019GY
IGG019H3
IGG019H7
IGG019HB
IGG019HD
IGG019HF
IGG019HG
IGG019HH
IGG019HI
IGG019HJ
IGG019HK
IGG019HL
IGG019HN
IGG019HP
IGG019I1
IGG019I2
IGG019I9
IGG019IA
IGG019IB
IGG019 IE
IGG019IF
IGG019IM
IGG019IN
IGG019IO
IGG019IX
IGG019IY
IGGOl9IZ
IGG019JO
IGG019J3
IGG019J6
IGG019J7
IGG019JC
IGG019JI
IGG019JJ
IGG019JK
IGG019JL
IGG019JM
IGG019JN
IGG019JO
IGG019JP
IGG019JQ
IGG019JR
IGG019JS
IGG019JT
IGG019JU
IGG019JV
IGG019JW
IGG019JX
IGG02028
IGG02029
IGG0202A
IGG0202D
IGG02021

302
IGG0202J
IGG0202K
IGG0202L
IGG0202M
in PL/I (F) COMPILER
29 GY28-6800
compiler control
IEMAA
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
as closed subroutines
as interface
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
flow between
hierarchy of
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
determining the current load module and
entry point name of the tested program
directory of
functions of Test modules
list of Test modules
loading of
removing
saving related data set information
regarding load modules
specifying the load module to be tested
Modules, by name
in GRAPHICS ACCESS METHOD
30 GY27-7113
IFFABA
IFFANA
IFF CAN 0 1
IFFCAN02
IFFCAN03
IFFGRTTR
IFFPAAST
IGC0007A
IGC0007C
IGC0007D
IGC0007E
IGC0107A
IGC070
IGG0190A
IGG0190B
IGG0190E
IGG0190J
IGG0190K
IGG0193L
IGG0193Y
IGG0193Z
IGG0203X
IGG0203Y
in S/360-1130 DATA TMN. - FORTRAN 25 GY27-7161
GTCLT
GTEND
GTNIT
GTP01
GTRED
GTWRT
IKDGDCFE
IKDGDCFF
IKDGDCFI
IKDGDCTE
IKDGDCTF
IKDGDCTI
IKDGTCLR
IKDGTCLT
IKDGTEND
IKDGTIRB
IKDGTNIT
IKDRDWRT
IKDUATBL
Modules, emulator program
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
description of
directory
flow of control among
functions of
load

303
Modules, emulator program
L--------------------------------------(continued)
in 7074 EMULATE FOR Ml165
GY27-7228
Modules, list of QTAM
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
by macro instruction
by module name
Modules of the routines
in TSO CATALOG MANAGEMENT
36 GY28-6745
Modules of the routines
specific module names)
in CATALOG MANAGEMENT
30 GY28-6606
MOD24
--rn

FORTRAN IV (H) COMPILER

MOD88 macro
EMULATOR FOR 7090/7094/709411
format
used by preprocessor program
in 7074 EMULATE FOR Ml165
emulator
preprocessor

--rn

MOETEXT, field in MODSEG
in TSO COMMAND PROC VOL5-0PERATOR
MONITOR command
in CONTROL PROGRAM WITH MFT
in MVT JOB MANAGEMENT
DSNAME
JOBNAMES
SPACE
STATUS
More input
in PUI SYNTAX CHECKER PLM
DIAGNSFL (COMFLAG1)
MOREIN (COMFL)
MOREIN
---rIlPL/I SYNl'AX CHECKER PLM
'mother-daughter' relationship
in PL/I SUBROUTINE LIBRARY

25 GY28-6642
35 GY27-7187
GY27-7228

36 GY28-6775
36 GY27-7128
36 GY28-6660

29 GY33-8009

MOVDIC routine
~n COBOL (F)

Move
---rn SORT/MERGE
33 GY28-6597
list
in-line
mode
multiple
variable
MOVE
in COBOL-TO-PL/l LCP
29 GY33-7007
Move, DEB routine
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
Move data queue
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
Move data subtask
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
MOVE Generator
in COBOL (E)
24 GY24-5009
Move mode processing
in INDEXED SEQUEN. ACCESS METHOD
30 GY28-6618
MOVE routine
in COBOL (F)
24 GY28-6382
Move routine (CCH)
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
MOVE statement
in COBOL (F)
24 GY28-6382
Move statement into work area
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
pointer to start of input (INPUTBEG)
pointer to break point table (BPTP)
subroutine MOVESTRG . otherwise known as the
PDAR Termination Analysis module
UGFASR20>
in MACHINE-CHECK HANDLER. S360 M65
PDAR Terminator module

~j155/165

PDARSTAT
in MACHINE-CHECK HANDLER. S360 M65 31 GY27-7155

PCOMCON. in history
in TSO COMMAND PROC VOL6-SUBMIT

in ONLINE TEST EXECUTIVE PROGRAM
in glossary
OLTEP as a problem program to

~1135/145

36 GY28-6771

PCLPTR
in TSO COMAND PROC VOL2-CNCL/STATUS36 GY28-6772
in PARSEINT
operation

PCONEX. in history
in TSO COMMAND PROC VOL6-SUBMIT

in MACHINE-CHECK HANDLER.
in MACHINE-CHECK HANDLER.

37 GY28-6651

30 GY27-7237

30 GY27-7198
31 GY27-7155

30 GY27-7237

31 GY27-7155

PDE
---in TSO COMAND PROC VOL2-CNCL/STATUs36
description
operation
in TSO COMMAND PROCESSOR VOL1-LIST 36
overlay of
format
use
P String
format
use
in TSO COMMAND PROCESSOR VOL4-FREE 36
for DDNAMES
for DSNAMES
for SYSOUT class (CLASSPDE)
in TSO COMMAND PROCESSOR VOL4-HELP 36
in TSO TMP & SERVICE ROUTINES
36
PDE. parameter string
in TSO COMMAND PROCESSOR VOL2-CALL 36
PDE. pointer to
36
in TSO COMMAND PROC VOL1-DELETE
PDE (parameter descriptor element>
in TSO COMMAND PROC VOL2-ALLOCATE 36
in TSO COMMAND PROC VOL6-PROFILE
36
in TSO COMMAND PROCESSOR VOL6-SEND 36
PDE blocks. space for
in TSO COMMAND PROC VOL1-DELETE
36

GY28-6772
GY28-677l

GY28-6774

GY28-6774
GY28-6770
GY28-6772
GY28-6771
GY28-6772
GY28-6776
GY28-6776
GY28-6771

PDECHAIN
in TSO COMMAND PROC VOL6-WHEN/END
field in PDL

36 GY28-6776

PDEDSNB. in DSNPDE
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

PDEDSNLN. in DSNPDE
in TSO COMMAND PROC VOL6-sUBMIT

36 GY28-6776

PDEDSNPT. in DSNPDE
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

PDEFLG1. in OONPDE
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

339
PDEFLG2, in DSNPDE
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

PDEFLG3, in DSNPDE
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

PDELIM in history
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

PDEMEMLN in DSNPDE
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

PDEMEMPT in DSNPDE
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

PDEFLG2 - PDrYPE
PDL, pointer to
in TSO COMMAND
in TSO COMMAND
in TSO COMMAND
PDL (SENDPDL)
in TSO COMMAND
description
operation
PDL usage
in TSO COMMAND

PROC VOL2-ALLOCATE 36 GY28-6772
PROCESSOR VOLl-CHNG 36 GY28-6771
PROCESSOR VOL2-CALL 36 GY28-6772
PROCESSOR VOL6-SEND 36 GY28-6776

PROCESSOR VOL4-EXEC 36 GY28-6774

PDLADDR
in TSO COMMAND PROCESSOR VOL6-RUN
address of RUNPDL
subfield in WORKAREA

36 GY28-6776

PDENUM
in TSO COMMAND PROC VOL6-WHEN/END
field in PDL

36 GY28-6776

PDENUMF
in TSO COMMAND PROC VOL6-WHEN/END
field in PDL

36 GY28-6776

PDLFLG, field in CFLAGS
---rn-TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-6771

36 GY28-6776

PDLPTR
---rn-TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
PDLPTR. in COMMON
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776

36 GY28-6776

PDLxxx fields in SENDPDL
---rn-TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776

PDENUML
in TSO COMMAND PROC VOL6-WHEN/END
field in PDE
PDBP DSEcr of PDL
---rn TSO COMMAND PROC VOL6-PROFILE
description of
illustration of
order of
pointer to
use of
PDEPASLN in DSNPDE
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

PDEPASSB in DSNPDE
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

PDEPASSP in DSNPDE
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

PDEQUATE in DSNPDE
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

PDERC

---rn TSO

COMMAND PROC VOL6-WHEN/END
field in PDL

PDESPAZ, data area
in TSO COMMAND PROC VOLI-DELETE

36 GY28-6776

36 GY28-6771

PDI (Packed Decimal Intermediate)
--in PL/I SUBROUTINE LmRARY

29 GY28-6801

PDIL9 instruction
in EMULATOR FOR 7090/7094/709411

35 GY27-7187

PDL
in TSO COMAND PROC VOL2-CNCL/STATUS36
in TSO COMMAND PROC VOL5-0UTPUT
36
description
in operation
in TSO COMMAND PROC VOL6-PROFILE
36
in TSO COMMAND PROC VOL6-PROTECT
36
in TSO COMMAND PROC VOL6-SUBMIT
36
description
used
in TSO COMMAND PROC VOL6-TERMINAL 36
in TSO COMMAND PROC VOL6-WHEN/END 36
data area
in data area directory
in TSO COMMAND PROCESSOR VOL4-FREE 36
in TSO TMP & SERVICE ROUTINES
36

GY28-6772
GY28-6775
GY28-6776
GY28-6776
GY28-6776

PDLADDR2, subfield in WORKAREA
in TSO COMMAND PROCESSOR VOL6-RUN

in CONTROL PROGRAM WITH MFT
in JOB MANAGEMENT
PDQ block
in JOB MANAGEMENT
PDQ directory block
in JOB MANAGEMENT
PDQ overflow block
in JOB MANAGEMENT
PDS
--in LINKAGE EDITOR (F)
in TSO COMMAND PROCESSOR VOLl-ADD
directory block
members
PDS (Partitioned Data Set)
in PL/I SUBROUTINE LIBRARY
PDS directories
in TSO COMMAND PROC VOL5-LISTDS
PDS directory
in TSO COMMAND PROC VOL4-LISTALC
reading of
PDS directory entry
in MVT SUPERVISOR
PDS member listing module (IKJEHMEM)
in TSO COMMAND PRoe VOL4-LISTALC
flowcharts
operation
organization
PDS members
in TSO COMMAND PROC VOL5-LISTDS

36 GY28-6776

36 GY27-7128
36 GY28-6613
36 GY28-6613
36 GY28-6613
36 GY28-6613
31 GY28-6667
36 GY28-6771

29 GY28-6801
36 GY28-6775
36 GY28-6774
36 GY28-6659
36 GY28- 6774

36 GY28-6775

---rn COBOL

PDSCN routine
(F)

24 GY28-6382

PDSLIST. field of IKJPARMD
in TSO COMMAND PROC VOL5-LISTDS

36 GY28-6775

GY28-6776
GY28-6776

PDT
--in JOB MANAGEMENT
PDT entry control information
in MVT JOB MANAGEMENT

GY28-6774
GY28-6770

PDTYPE, in history
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6613
36 GY28-6660

36 GY28-6776

PDT020 -

340

PFnmL

PDT020 routine
---rilCOBOL (F)

24 GY28-6382

PECB (Post Event Control Block)
in PL/I SUBROUTINE LIBRARY

29 GY28-6801

PECTPTR, in PARSEINT
in TSO COMAND PROC VOL2-CNCL/STATUS36 GY28-6772
PEND statement
---rn JOB MANAGEMENT
in ·MVT JOB MANAGEMENT
pendin~

36 GY28-6613
36 GY28-6660

trap
MULATOR FOR 7090/7094/709411

35 GY27-7187

PENDTRAP
in EMULATOR FOR 7090/7094/709411
format
use

35 GY27-7187

1n

PENPRO
- r DALGOL-TO- PL/l LCP

29 GY33-7006

PENTRK--light pen tracking routine
in GRAPHICS PROBLEM ORIENTED RTNS. 30 GY27-7110
PERF
in COBOL-To-PL/1 LCP
PERFOR-IEKQPF
- r DFORTRAN IV (H) COMPILER
PERFORM cells
in COBOL (F)
PERFORM routine
in COBOL (F)
PERFORM statement
in COBOL (F)
in sort
PERFORM statement, processing
in COBOL-TO- PL/l LCP

29 GY33-7007

Permanent error flag
in TCAM SERVICEABILITY AIDS
30
Permanent errors
in INPUT/OUTPUT SUPERVISOR
30
defined
in glossary
used for recording error data
1052 error routine
1403 and 1443 error routine
1442, 2501, and 2502 error routine
2250 error routine
2260 and 1053 error routine
2301, 2302, 2303, 2305, 2311, 2314,
2321, and 3330 error routines
2400 error routine
2495 error routine
2540 error routine
2671 error routine
5450 error routine
Permanent I/O error
in EMULATOR FOR 7090/7094/709411
35
handling
message
in FORTRAN IV (H) COMPILER
25
in MVT JOB MANAGEMENT
36
Permanent I/O errors
in SEQUENTIAL ACCESS METHODS
30
Permanent Storage Assignment Area

GY30-2027
GY28-6616

GY27-7187
GY28-6642
GY28-6660
GY28-6604

(PSA)

25 GY28-6642

in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
Permanently resident volume
in JOB MANAGEMENT
36 GY28-6613

24 GY28-6382

PER PRO
---rilCOBOL-TO-PL/l LCP

29 GY33-7007

PERPTR
---rilCOBOL-TO-PL/1 LCP

29 GY33-7007

24 GY28-6382
24 GY28-6382

Persistent error
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
29 GY33-7007
PERSW

performance, impairment
in SORT/MERGE
Performance module
in FORTRAN IV (E)
components of
functions of
linkages to
loaded into main storage
manipulating of text buffer
chains
retprns from
Performance module routines
in FORTRAN IV (E)
Performance module tables
in FORTRAN IV (E)
PERFSW
-rDCOBOL-To-PL/l LCP

33 GY28-6597
25 GY28-6601

PEXEC, in history
in TSO COMMAND PROC VOL6-SUBMIT
PEXIT

25 GY28-6601
25 GY28-6601
29 GY33-7007

29 GY33-7007
36 GY28-6776

(E)

24 GY24-5009

PEXIT2
-rDCOBOL (E)

24 GY24-5009

PEXP
---rn PL/I (F) COMPILER
PEXP statement
in PL/I (F) COMPILER
deleted

29 GY28-6800
29 GY28-6800

LCP

29 GY33-7007

PF-bit
-- in INDEXED SEQUEN. ACCESS METHOD
PF routine
in COBOL (F)

LCP

29 GY33-7007

PFEMSG switch
-rDONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

29 GY33-7006

PFIG01, field in DPOB
---rilTSO COMMAND PROC VOL1-DELETE

36 GY28-6771

PERF9

-rn COBOL-TO-PL/l

COBOL-TO-PL/1 LCP

-rn COBOL

PERF 8

--rn COBOL-T 0- PL/l

--rn

Period
---rilALGOL-TO-PL/l LCP
Period (.)
in PL/I SYNTAX CHECKER PLM
decimal point
dot qualification symbol
Periods of an extent
in SEQUENTIAL ACCESS METHODS

30 GY28-6618
24 GY28-6382

29 GY33-8009

30 GY28-6604

PFINDL routine
-rDCOBOL (F)
PFINDL subroutine
in COBOL (F)

24 GY28-6382
24 GY28-6382

3111
PFLG01, field in DPOB
---rn-TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
PFMCTL field
in COBOL (F)
Pi'MCTL-I counter
in COBOL (F)
PF'MCTR counter
---rn-COBOL (F)
PFlYJSAV cells
-----rnCOBOL (F)
PFlYJSAV field
in COBOL (F)
PFlYJSAV-I fields
in COBOL (F)
PFMSAV numbers
in CODOL (F)
PFlotiTBL table
---rn-COBOL (F)

24 GY28-6382

24 GY28-6382

PGTINT routine
-----rn COBOL (F)

24 GY28-6382

24 GY28-6382

PH record
in COBOL-TO-PL/1 LCP

29 GY33-7007

24 GY28-6382

PHASB
in FORTRAN IV (H) COMPILER

25 GY28-6642

24 GY28-6382
24 GY28-6382
24 GY28-6382
24 GY28-6382

36 GY28-6775
36 GY28-6774
36 GY28-6775
36 GY28-6774

PGF-ROUT routine
- i n COBOL (F)

24 GY28-6382

PGM-ROUT routine
- i n COBOL (F)

24 GY28-6382

PGhlD

PGMTAB
---rn-ONLINE TEST EXECUTIVE PROGRAM
description of
discussion of
illustration of
in common area
in glossary
in operation diagram
PGOBAK
---rn-COBOL (E)

29 GY33-7007
37 GY28-6651

24 GY24-5009

PGPB
in TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6775
data area
in data area directory
in TSO TMP 6 SERVICE ROUTINES
36 GY28-6770
PGPB (PUTGET parameter list)
in TSO COMMAND PROCESSOR VOL1-ACCT 36 GY28-6771
fields in
input to IKJPTGT
size of
PGPB1BUF, field in PGPB
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

P<3PROL
in ALGOL-TO-PL/1 LCP

29 GY33-7006

PGPROT

29 GY33-7006

(F)

PFREEML. field of CALLIST
in TSO COMMAND PROC VOL5-LISTDS

~ COBOL-To-PLll LCP

Phase

24 GY28-6382

37 GY28-6651

PGBTML, field of CALLIST
in TSO COMMAND PROC VOL5-LISTDS
PG~TML field in CALLIST
in TSO COMMAND PROC VOL4-LISTALC

in ALGOL-TO-PL/l LCP
PGT
--in COBOL

PFPMSG switch
---rn-ONLINE TEST EXECUTIVE PROGRAM

PFREENL field in CALLIST
in TSO COMMAND PROC VOL4-LISTALC

PFLG01 -

Phase

---rn

COBOL-TO-PL/1 LCP
Control Phase
Phase 10
Phase 20
Phase 30
Phase 40
Phase 50
in INDEXED SEQUEN. ACCESS METHOD
Phase, wanted/not wanted
in PL/I (F) COMPILER
Phase control module
in SORT/MERGE
Phase deleting
in PL/I (F) COMPILER
Phase directory
in PL/I (F) COMPILER
construction
error messages
format
status byte
Phase Exits
in COBOL (E)
Phase FI
in ASSEMBLER (F)
introduction
I/O Functions
I/O Subroutines
main line control
operation
Phase FPP
in ASSEMBLER (F)
functions
introduction
operation
Phase F1
in ASSEMBLER (F)
chaining
functions
introduction
operation
Phase F2
in ASSEMBLER (F)
chaining
functions
introduction
operation
subroutines
Phase F3
in ASSEMBLER (F)
abort
functions
introduction
operation
subroutines
Phase F3E
in ASSEMBLER (F)
Phase F7
in ASSEMBLER (F)
chaining
introduction
I/O Functions

29 GY33-7007

30 GY28-6618
29 GY28-6800
33 GY28-6597
29 GY28-6800
29 GY28-6800

24 GY24-5009
21 GY26-3700

21 GY26-3700

21 GY26-3700

21 GY26-3700

21 GY26-3700

21 GY26- 3700
21 GY26- 3700

II[i

Phase - Phases
Phase F7
I in ASSEMBLER (F)
21 GY26-3700
L--------------------------------------(continued)
operation
phase organization
Phase F8
in ASSEMBLER (F)
21 GY26-3700
chaining
introduction
I/O FUnctions
operation
phase organization
Phase-in-Storage Map
in PL/I (F) COMPILER
29 GY28-6800
Phase Initialization
in COBOL (E)
24 GY24-5009
Phase loading
in FORTRAN IV (H) COMPILER
25 GY28-6642
in PL/I (F) COMPILER
29 GY28-6800
Phase marking
in PL/I (F) COMPILER
29 GY28-6800
Phase-to-phase information area
in SORT/MERGE
33 GY28-6597
names, format of
phase 00
in COBOL (F)
24 GY28-6382
Phase 01
in COBOL (F)
24 GY28-6382
Phase 1
in COBOL (F)
24 GY28-6382
Phase 1 of open
30 GY28-6604
in SEQUENTIAL ACCESS METHODS
Phase 10
29 GY33-7006
in ALGOL-TO- PL/ 1 LCP
routines
in COBOL-To-PL/1 LCP
29 GY33-7007
in FORTRAN IV (H) COMPILER
25 GY28-6642
constructuring a cross-reference
cont.rol
initialization
intermediate text
in FORTRAN IV-TO-PL/1 LCP
29 GY33-7000
Phase 15
in FORTRAN IV (H) COMPILER
25 GY28-6642
CORAL processing
intermediate text
PHAZ15 processing
Phase 2
in COBOL (F)
24 GY28-6382
Phase 2 of open
in SEQUENTIAL ACCESS METHODS
30 GY28-6604
Phase 20
in ALGOL-TO-PL/1 LCP
29 GY33-7006
routines
in COBOL-TO-PL/1 LCP
29 GY33-7007
in FORTRAN IV (H) COMPILER
25 GY28-6642
Branching optimization
OPT=1
OPT=2
busy-on-exit information
control flow
loop selection
register assignment
basic OP'I=O
full OPT=1
full OPT=2
structural determination
structured source program listing
text optimization OPT=2
in FORTRAN IV-TO-PL/1 LCP
29 GY33-7000
Phase 25
in ALGOL-To-PL/1 LCP
29 GY33-7006
in FORTRAN IV (H) COMPIL~R
25 GY28-6642
address constant reservation
prologue and epilogue generation
storage map production

342
text conversion
Phase 3
in COBOL un
Phase 3 of Open
in SEQUENTIAL ACCESS METHODS
Phase 30
in ALGOL-TQ-PL/1 LCP
routines
in COBOL-TO-PL/1 LCP
in FORTRAN IV (H) COMPILER
in FORTRAN IV-TO- PL/1 LCP
Phase 4
in COBOL (F)
Phase 40
in ALGOL-TO-PL/1 LCP
routines
in COBOL-TO-PL/1 LCP
Phase 5
in COBOL (F)
Phase 50
in COBOL-TO-PL/l LCP
Phase 6
in COBOL (F)
Phase 7
in COBOL (F)
Phases
---rn-FORTRAN IV (G) COMPILER
allocate
components of
Exit
Gen
Invocation
Parse
Unify
in PL/I (F) COMPILER
branch after execution
communication between
control between
logical
Aggregates
Compile-time Processor
Dictionary
Error Editor
Final Assembly
Optimization
Pretranslator
Pseudo-code
Read-In
Register Allocation
Storage Allocation
Translator
organization
physical
table
Phases and Modules - Descriptions,
Flowcharts, and Subroutine Tables
in PL/I (F) COMPILER
AA

AB
AC
AD
AE

AF
AG
AH
AI
AJ

AK

AL
AM

AN
AS
AT
AV
BC
BE

24 GY28-6382
30 GY28-6604
29 GY33-7006
29 GY33-7007
25 GY28- 6642
29 GY33-7000
24 GY28-6382
29 GY33-7006
29 GY33-7007
24 GY28-6382
29 GY33-7007
24 GY28-6382
24 GY28-6382
25 GY28-6638

29 GY28- 6800

29 GY28-6800

Phases - Pbases

343
Phases and Modules - Descriptions,
I Flowcharts, and Subroutine Tables

L--~~-:~~~-~:~-~~~:~~~---------------~1c~~f~~~~~
BF
BG
BI
BJ

KB
KC
KE

KG

KJ

BN

KN
KO
KP
KQ
KT

EM
EO

KU

BP through BV
BW
BX

KV
LB
LD

CA

LG
LR
LS

CC
CE
CG
CI
CK
CL

LV
LW
LX
LY

CM

MA

CN

MB

CO
CP

MD
ME

CR

MG

CS

MI
MK

CT
CV

CW
ED
EF
EG

EH

EI
EJ

ML
MM
MP
MS
NA
NG
NJ
NM

EK

NT

1!.L
EV

NU
OB
aD
OE

1!.W

OG

EY

OL
OM
OP
as
PA
PD
PH
PL
PO
PP

EM

1!.P

Fl
FA
FE
FI
FK
FO

FQ
FT
FV
FX

PI'

GA
GB
GC
GK
GO
GP
GU
HF
HK
HP
IA
IG
IK
IL

QF
QJ
QU

1M

TQ
T1'

IT
IX
JD
JI
JK
JP
JZ
KA

QX
RA

RB
RC
RD
RF

RG
RH
TF
TJ
TO
UA

un
UE
UF

UH

UI
XA

Phases - PICTURE
344
Phases and Modules - Descriptions,
Physical organization of catalog
IFlowcharts, and subroutine Tables
in CATALOG MANAGEMENT
I in PL/I (F) COMPILER
29 GY28-6800
in TSO CATALOG MANAGEMEN~
l--------------------------------------(continued)
XB
Physical organization of QTAM
in QUEUED TELECOMM. ACCESS METHOD
XC
Physical organization of RJE
XF
XG through YY
in REMOTE JOB ENTRY
Physical record
Phases and Modules - Guide
in TSO COMMAND PROCESSOR VOL3-EDIT
29 GY28-6800
in PL/I (F) COMPILER
definition
Phases of IEHPROGM
Physical registers, use
in UTILITIES
32 GY28-6614
in PL/I (F) COMPILER
Phases of Operation
in COBOL (E)
24 GY24-5009
Physical sequential data set
in UTILITIES
PHASS
record format
in FORTRAN IV (H) COMPILER
25 GY28-6642
Physical structure of syntax checker
in PL/I SYNTAX CHECKER PLM
PHAZSS
PHZSW switch
in FORTRAN IV (H) COMPILER
25 GY28-6642
in COBOL (F)
PHAZ15
in FORTRAN IV (H) COMPILER
25 GY28-6642
PH1ERR table
-rDCOBOL (F)
PHAZ15-IEKJA
in FORTRAN IV (H) COMPILER
25 GY28-6642
PH10-IEKCAA
PH~S - Close subroutine
---rn FORTRAN IV (H) COMPILER
1n ASSEMBLER (F)
21 GY26-3700
Phase F7
PH15-IEKJAl
----in FORTRAN IV (H) COMPILER
Phase F8

30 GY28-6606
36 GY28-6745
30 GY30-2002
36 GY30-2005
36 GY28-6773
29 GY28-6800
32 GY28-6614
29 GY33- 8009
24 GY28- 6382
24 GY28-6382
25 GY28-6642
25 GY28-6642

PHCTRL routine
---rn-COBOL (F)

24 GY28-6382

PH2ERR table
---rn-COBOL (F)

24 GY28-6382

PHINIT routine
---rn-COBOL (F)

24 GY28-6382

PH3ERR table
---rn-COBOL (F)

24 GY28-6382

---rn TSO

PHIST field in IKJPARMD
COMMAND PROC VOL4-LISTALC

36 GY28-6774

PH4ERR table
---rn-COBOL (F)

24 GY28-6382

PHISTORY, field of IKJPARMD
in TSO COMMAND PROC VOL5-LISTDS

36 GY28-6775

PH5CTL routine
-rrlCOBOL (F)

24 GY28-6382

PH5ERR table
---rn-COBOL (F)

24 GY28-6382

Pri6 routine
---in COBOL (F)

24 GY28-6382

PH7LOD field
- r DCOBOL (F)

24 GY28-6382

Physical
in SORT/MERGE
33 GY28-6597
tape
unit
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771
characteristics
PDS members
Physical address table
in TCAM SERVICEABILITY AIDS
30 GY30-2027
Physical channel
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
channel table
in data area directory
data area layout
explanation
Physical characteristics
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
in TSO COMMAND PROC VOL4-LISTBC
36 GY28-6774
in TSO COMMAND PROC VOL6-WHEN/END 36 GY28-6776
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
Physical characteristics, ACCOUNT command
processor
in TSO COMMAND PROCESSOR VOL1-ACCT 36 GY28-6771
Physical characteristics, broadcast data
set control module
in TSO COMMAND PROC VOLl-BROADCAST 36 GY28-6771
Physical characteristics of CALL CP
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
Physical characteristics of DELETE
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
Physical characteristics of EXEC
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
Physical device addresses
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651

in COBOL-TQ-PL/l LCP

29 GY33-7007

in CONTROL PROGRAM WITH MFT

36 GY27-7128

PIB
PICA
in MVT SUPERVISOR
PICA, field definition
in PL/I SUBROUTINE LIBRARY
PICA, format
in PL/I SUBROUTINE LIBRARY
PICA (Program Interrupt Control
Area)
in PL/I SUBROUTINE LIBRARY

29 GY28-6801

PICCOM
---rn-COBOL (E)

24 GY24-5009

PICDESCRIP
in COBOL-TO-PL/l LCP

29 GY33-7007

PICTRE
in COBOL (E)

24 GY24-5009

36 GY28- 6659
29 GY28-6801
29 GY28-6801

345
Picture
in PLII (F) COMPILER
chain
contextual use
dictionary entry
marker
table
PICTUR£ (keyword attribute)
in PLII SYNTAX CHECKER PLM
checking of specification
in ENTRY. PROCEDURE statements
in RETURNS attribute list
subroutine IKM131
Picture and Literals Analysis
in COBOL (E)
Picture character string
in PL/I SUBROUTINE LIBRARY
PICTURE flag
in COBOL (F)
Picture format items
in PLII SUBROUTINE LIBRARY
Picture Routine
in COBOL (E)
PICTURE specification
in PL/I SYNTAX CHECKER PLM
$ in
character-string
characters in
numeric character
digit position
drifting form
static form
sterling
subroutine IKM131
Picture string specification-IEBDG
in UT ILIT IES

32 GY28-66l4

PIC100
in COBOL (E)

24 GY24-5009

Picture -

PLINK

PIC545
---rilCOBOL (E)

24 GY24-5009

keywords
language
compiler F-Ievel
syntax version
reference manual:
syntactical units
syntax checker program
in TSO COMMAND PROCESSOR VOL3-EDIT
definition
validation of source margins
PL/I (F)
in ALGOL-TO-PL/l LCP
PL/I built-in function names
in FORTRAN IV-TO-PLll LCP
PL/I compiler
in ALGOL-TO-PL/l LCP
PL/I dump
in PL/I SUBROUTINE LIBRARY
PLII file-name
in ALGOL-TO-PLll LCP
PL/I internal error codes/messages
in PL/I SUBROUTINE LIBRARY
PL/I library
in PL/I SUBROUTINE LIBRARY
compatibility
function
PL/I library generation
in PL/I SUBROUTINE LIBRARY
PL/I library system macros
in PL/I SUBROUTINE LIBRARY
PL/I on-conditions
in PL/I SUBROUTINE LIBRARY
PL/I program management
in PL/I SUBROUTINE LIBRARY
PL/I program termination
in PL/I SUBROUTINE LIBRARY
PL/I pseudo-registers
in PL/I SUBROUTINE LIBRARY
PL/I standard calling sequence
in PL/I SUBROUTINE LIBRARY
PL/I statements
in PL/I SUBROUTINE LIBRARY
DELAY
DISPLAY
EXIT
STOP
PL/l conversational syntax checker
interface
in CRJE PLM
PL/l syntax checker
in CRJE PLM

PIC900
in COBOL (E)

24 GY24-5009

PLABEL. field of IKJPARMD
---rn-TSO COMMAND PROC VOL5-LISTDS

36 GY28-6775

36 GY28-6659

Planned overlay structure
in FORTRAN IV (H) COMPILER

25 GY28- 6642

29 GY28-6800

29 GY33-8009

24 GY24-5009
29 GY28-6801
24 GY28-6382
29 GY28-6801
24 GY24-5009
29 GY33-8009

PICllO

~COBOL (E)

24 GY24-5009

PIC410
in COBOL (E)

24 GY24-5009

PIC512
in COBOL (E)

24 GY24-5009

PIE
in MVT SUPERVISOR
PIE (Program Interrupt Element)
in PL/I SUBROUTINE LIBRARY
Plh field definitions
in PL/I SUBROUTINE LIBRARY
PIOTBL table
--Y;-COBOL (F)
PJOB. in history
in TSO COMMAND PROC VOL6-SUBMIT
PLII
in PLII SYNTAX CHECKER PLM
characters (valid)
input
buffers
lines
records
statements

29

~Y28-6801

29 GY28-6801
24 GY28-6382
36 GY28-6776

Plex
---rn FORTRAN IV (G) COMPILER
definition
description

36 GY28-6113

29 GY33-1006
29 GY33-1000
29 GY33-1006
29 GY28-6801
29 GY33-1006
29 GY28-6801
29 GY28-6801

29 GY28-6801
29 GY28-680l
29 GY28-6801
29 GY28-680l
29 GY28-680l
29 GY28-680l
29 GY28-680l
29 GY28-680l

Ii
36 GY30-2011
36 GY30-2011

25 GY28-6638

PLFAIL. field in DLCTLR
---rn-TSO COMMAND PROC VOL1-DELETE

36 GY28-677l

PLINE
in GRAPHIC SUBRTN. PACKAGE

25 GY21-1152

29 GY33-8009
PLINK
in
PLINK
in

routines
ONLINE TEST EXECUTIVE PROGRAM
Service module
TCAM SERVICEABILITY AIDS
entry
functions

31 GY28-665l
30 GY30- 2021

PLM -

346

Pointer

PLM Master Index - Nerge C
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029

PNAME, in history
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

---rn TSO

PLNOW, field in DLCTLR
COMNAND PROC VOLI-DELETE

36 GY28-6771

PNBPRO routine
in COBOL (F)

24 GY28-6382

---rn

PLOUT, data area
TSO COMMAND PROC VOLI-DELETE

36 GY28-6771

PNCTR counter
in COBOL (F)

24 GY28-6382

PLOUTx, field in PLOUT
---rn-TSO COMNAND PROC VOLI-DELETE

36 GY28-6771

PNDEFR routine
---rn-COBOL (F)

24 GY28-6382

PNEQUR routine
in COBOL (F)

24 GY28-6382

PLPLIST
in TSO COMNAND PROCESSOR VOLI-CHNG 36 GY28-6771
data area
in directory
PLPLIST (Putline Parameter List)
in TSO CONNAND PROCESSOR VOLI-LIST 36 GY28-6771
format
use

PNOTHING, in history
in TSO COMNAND PROC VOL6-SUBMIT

36 GY28-6776

PNOUNT table
---rn-COBOL (F)

24 GY28- 6382

PLPLxxx, field in PUTL
in TSO COMNAND PROC VOLI-DELETE

36 GY28-6771

PNQTBL table
in COBOL (F)

24 GY28-6382

PLPTRl
in TSO COMNAND PROCESSOR VOLI-CHNG 36 GY28-6771

PNTBL table
in COBOL (F)

24 GY 28- 6382

PLSGEN-IEKVPL
in FORTRAN IV (H)

COMPIL~R

25 GY28-6642

PNTRYF, field in DICTLR
in TSO COMMAND PROC VOLI-D~LETE

36 GY28-6771

PLSTR
in GRAPHIC SUBRTN. PACKAGE

25 GY27-7152

PNUL
in TSO COMNAND PROC VOL6-SUBMIT

36 GY28- 6776

PLS005 routine
---rn-COBOL (F)

24 GY28-6382

PNULL, in history
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

25 GY28-6638

PNUPRO routine
---rn-COBOL (F)

24 GY28-6382

Plus and below phony driver
in FORTRAN IV (G) COMPILER
Plus passive line operator
in FORTRAN IV SYNTAX CHECKER PLM
Plus sign (+)
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

PLIGEN
---rn-COBOL-TO-PL/l LCP

29 GY33-7007

PNAP option
in COBOL (F)

24 GY28-6382

field in COMNON
in TSO COMNAND PROCESSOR VOLI-ADD

25 GY28-6831

PMEMBERS, field of IKJPARMD
in TSO COMNAND PROC VOL5-LISTDS
PNISC, in history
in TSO COMNAND PROC VOL6-SUBMIT

PN
PN
PN
PN
PN

POBTWAD, field of CALLIST
in TSO COMMAND PROC VOL5-LISTDS
POBTWAD field in CALLIST
in TSO COMMAND PROC VOL4-LISTALC

36 GY28-6775
36 GY28-6774
30 GY21-0012

36 GY28-6771
36 GY28-6774
36 GY28-6775
36 GY28-6776

PN
in COBOL (F)
definition
attributes
in COBOL (F)
definitions
in COBOL (F)
Equate Strings
in COBOL (F)
Procedure A-Text format
field
in COBOL (F)
numbers
in COBOL (F)

24 GY28-6382

Pocket light (CNTRL)-IGG019V4
---rn-IBN 1419/1275 DEVICE DEP. BSAM

P~~SPTR,

PMEM field in IKJPARMD
----in TSO COMMAND PROC VOL4-LISTALC

PNUTBL table
------rilCOBOL (F)
format

24 GY28-6382
24 GY28-6382
24 GY28-6382
24 GY28-6382
24 GY28-6382
24 GY28-6382

Point list, delete
in TSO COMMAND PROC VOLI-DELETE
POINT macro expansion linkage
in TELECOMNUNICATION ACCESS METHOD
POINT macro instruction, processing
for
in TSO CONTROL PROGRAM
Point routine
in TELECOMNUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
Point routines
in SEQUENTIAL ACCESS NETHODS
Pointer
in FORTRAN IV (G) COMPILER
ADDRESS field
definition
description
OPERATOR fie ld
TAG field
in TSO COMMAND PROC VOL6-TERMINAL

36 GY28-6771
30 GY30-2029
36 GY28-7199
30 GY30-2029

30 GY28-6604
25 GY28-6638

36 GY28-6776

347
Pointer
I in TSO COMMAND PROC VOL6-TERMINAL 36 GY28-6776
L--------------------------------------(continued)
PDEPTR
to line number
to PARSE storage (STORPTR)
to PCL
to PSCB
to UPT
to user work area
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
POINTER, in pointer expression
in PL/I (F) COMPILER
29 GY28-6800
Pointer, symbol for
in TSO COMMAND PROC VOL5-LISTCAT
36 GY28-6775
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
Pointer, VF
in TESTRAN
37 GY28-6611
POINTER (keyword attribute)
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
attribute classification
in ENTRY; PROCEDURE statements
in RETURNS attribute list
Pointer diagrams
in INDEXED SEQUEN. ACCESS METHOD
30 GY28-6618
BISAM
load mode
scan mode
Pointer entries
in CATALOG MANAGEMENT
30 GY28-6606
in TSO CATALOG MANAGEMENT
36 GY28-6745
Pointer expression (PEXP)
in PL/I (F) COMPILER
29 GY28-6800
Pointer field
in FORTRAN IV (E)
25 GY28-6601
in intermediate text
Pointer qualification
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
Pointer qualification symbol
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
-> (60-character set)
PT (48-character set)
Pointer record, assignment address
in COBOL-TO-PL/l LCP
29 GY33-7007
Pointer to
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
current source character (S~RTPTR)
start of source input (INPUTBEG)
start of token string (WORKBEG)
Pointers
in ASSEMBLER (F)
21 GY26-3700
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY28-6772
answer place
CPPL
command buffer
DAPL
dsname to be searched for
ECT

PAPB
PPB08
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771
in UADS
to entries in UADS
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
to answer place
to ATABs
to Command Buffer
to ECB
to ECT
to FTABs
to input buffers
to lOB
to PCL
to PSCB
to STOP/MODIFY ECB

Pointer - Po1isb
to UPT
to work area of user
in TSO COMMAND PROC VOL2-ALLOCATE
PSCB
PUTLINE PTPB
registers used as
UPT
work area
Pointers, RLD (relocation dictionary
processing)
in LOADER
use of
Pointers in data areas
in TSO COMMAND PROC VOL2-DELETE
answer place
command buffer
da ta set name
ECB
ECT
environment control
table
IKJDAIR parameter block
IKJEHDEF parameter block
IKJEHDEF qualifier
index name
I/O parameter block
member name
next dsname
PARSE work area
password
PCL (parse control list)
PSCB
TTR
UPT
user profile table
WRK7AREA
WRK2AREA
Pointers to
in TSO COMMAND PROC VOL6-WHEN/END
ECB
ECT
IOPL

36 GY28-6772

31 GY28-6714

36 GY28-6772

36 GY28-6776

OPT

in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
answer place
command buffer
DAIR PARM
DAPB
dsname
ECB
ECT

I/O parameter list
IOPB for PUTLINE
member name
parameter string
PARSE validity exit
PARSE work area
password
PCL
POL
PSCB
STACK parameter list
UPT
Pointers to fields
in PL/I SYNTAX CHECKER PLM
debugging hints for
Points
---rn-GRAPHIC SUBRTN. PACKAGE
POITBL table
in COBOL (F)
format
Polish notation
---rn-FORl'RAN IV (G) COMPILER

29 GY33- 8009
25 GY27-7152
24 GY28-6382

25 GY28-6638

Ii

Po1ish - pop

348

Polish notation
I in FORTRAN IV (G) COMPILER
25 GY28-6638
L--------------------------------------(continued}
arithmetic and logical assignment
statement
arithmetic expressions
arithmetic IF statement
array references
ASSIGN statement
assigned GO TO statement
BACKSPACE statement
BLOCK DATA statement
CALL statement
computed GO TO statement
CONTINUE statement
DATA statement
debug statements
DEFINE FILE statement
definition of
direct-access statements
DO statement
END FILE statement
END statement
ENTRY statement
Explicit specification statements
FIND statement
formats
FUNCTION statement
general
in Gen
in Parse
input/output lists
labeled statements
logical IF statement
PAUSE and STOP statements
PRINT statement
PUNCH statement
READ statement
RETURN statement
REWIND statement
statement function
SUBROUTINE statement
unconditional GO TO statement
WRITE statement
Poll command (Auto Poll)
---rn BASIC TELECOMM. ACCESS METHOD
Poll list
in GRAPHICS ACCESS METHOD
Polling characters
in TCAM SERVICEABILITY AIDS
Polling limit routine
in QUEUED TELECOMM. ACCESS METHOD
chart

30 GY30-2001

ASK
ASP
BID
BIM
BIN
BOP
CAR
CLA

CNT
CPO
cross reference list
CRP
CSA
CSF
definition
detailed description
DIM
DIV
EAD
EAW
ECW
EOP
ETA
FET
FLP
FRK
FRP
FTH
general description
lAD
IND
lOP
lOR
ITA
ITM
JAF
JAT
JOW
JPE
JRD
JSB
JON
LCE

LCF
LCT
LGA
LGP

LLS
30 GY27-7113

LRS

30 GY30-2027

LSS
MOA
MOC
MON
MPY

30 GY30-2002

NOG

NOZ
POLY
---rn SORT/MERGE
in parameter list
POLY (arrays)
in PL/I SUBROUTINE LIBRARY

PGO

33 GY28-6597
29 GY28-6801

Polyphase tape
techniques
in SORT/MERGE
block/deblock modules
DCB" lOB modules

33 GY28-6597

POP instructions
---in FORTRAN IV (G) COMPILER
ADD

25 GY28-6638

AFS

AND
APH
ARK
ARP

PGP
PLD
PNG
POC
POW
PSP
PST
QSA
QSF
REL
RSV
SAD

SBP

SBS
SCE
SCK
SFP
SLE
SNE

349
POP instructions
I in FORTRAN IV (G) COMPILER
25 GY28-6638
l--------------------------------------(continued)
SNZ
SOP
SPM
SPT
SRA
SRD
STA
STM
SUB
SWT
TLY
WOP
W1P
W2P
W3P
W4P
XIT
ZER
POP interpreter
in FORTRAN IV (G) COMPILER
25 GY28-6638
definition
description
general
POP jump table (POPTABLE)
in FORTRAN IV (G) COMPILER
25 GY28-6638
definition
description
location in storage
POP language
in FORTRAN IV (G) COMPILER
25 GY28-6638
cross-reference list
definition
detailed description
general description
notation used
POP S~~UP routine
in FORTRAN IV (G) COMPILER
25 GY28-6638
POP subroutines
in FORTRAN IV (G) COMPILER
25 GY28-6638
assembler references to
definition
general
location in storage
POPADR register
in FORTRAN IV (G) COMPILER
definition
description

25 GY28-6638

POPPGB register
in FORTRAN IV (G) COMPILER
definition
description

25 GY28-6638

POPXIT register
in FORTRAN IV (G) COMPILER
description

2~

GY28-6638

POR names, identifications, and functions
in GRAPHICS PROBLEM ORIENTED RTNS. 30 GY27-7110
POS

in PL/I SYNTAX CHECKER PLM

29 GY33-8009

POSCNT field in E01DATDF
---rn-TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
POSITION (keyword attribute)
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
checking of
not with DEFINED in attribute list
subroutine POS (IKM23)
Position key

pop - Posting

in ALGOL-TQ-PL/l LCP
Position pointer
in LINKAGE EDITOR (F)
positional operands
in TSO COMMAND PROC VOL1-DELETE
in TSO COMMAND PROC VOL6-WHEN/END
in TSO COMMAND PROCESSOR VOL1-CHNG
in TSO COMMAND PROCESSOR VOL6-TIME
Positional parameters
in JOB MANAGEM~NT
in MVT JOB MANAGEMENT
in TSO COMMAND PROC VOL5-0PERATOR
in TSO COMMAND PROCESSOR VOL4-EXEC

29 GY33-7006
31 GY28-6667
36
36
36
36

GY28-6771
GY28-6776
GY28-6771
GY28-6776

36
36
36
36

GY28-6613
GY28-6660
GY28-6775
GY28-6774

POSSPC field in E01DATDF
---rn-TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
POST
---rn MFT SUPERVISOR
36 GY27-7236
entry point
flowchart
functional description
module description
module synopsis
POST CODE
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Post entry code
in 7074 EMULATE FOR M/165
GY27-7228
definition
use
Post event control block (PECB)
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Post-Invocation Initiator Exit
routine
in TSO CONTROL PROGRAM
36 GY28-7199
Post Non-Data Select routine (IITSELPT)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
description
flowchart
Post pending routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
Post routine
in MVT SUPERVISOR
36 GY28-6659
description of
entry point name(s) of
flowchart of
module name for
synopsis of
Post routine interface
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
Post-scan routine
in JOB MANAGEMENT
36 GY28-6613
Post start I/O routine
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
Post 7094 End-of-File routine (IITSELPF)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
description
flowchart
Post 7094 End-of-String routine (IITSELPS)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
description
flowchart
POSTFLG, field in CFLAGS
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
Posting
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
Posting account ECB
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

350

Posting - PPLECT

Posting an event control block
in MVT SUPERVISOR
36 GY28-6659
general
posting the I/O supervisor event control
block
posting the parent task's event control
block
posting the program fetch event control
block
Posting channel operations
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
Posting of Mainline
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
causes and resultant processing
Postprocessor
in EMULATOR FOR 7090/7094/709411
in 7074 EMULATE FOR M/165
control card scanning
description
diagnostic aids
flowcharts
program organization
input
message handling
output
Potential user on device (PUD) table
in JOB MANAGE~lliNT
Pound symbol (#)
PL/I SYNTAX CHECKER PLM
valid alphanumeric character

---rn

POUT BUF, field of CALLIST
in TSO COMMAND PROC VOL5-LISTDS
POUTBUF field in CALLIST
in TSO COMMAND PROC VOL4-LISTALC

35 GY27-7187
GY27-7228

36 GY28-6613
29 GY33-8009

36 GY28-6775
36 GY28-6774

Powers
in FORTRAN IV (H) COMPILER

25 GY28-6642

PP option
in ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

PPEXIT (field in test communication table)
---rn-TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description of
PPI
in SORT/MERGE
names, format of

33 GY28-6597

PPIBDSVA
in SORT/MERGE

33 GY28-6597

PPIN
in ASSEMBLER (F)

21 GY26-3700

PPISWl
---rn-SORT/MERGE

33 GY28-6597

PPITPTBL
in SORT/MERGE

33 GY28-6597

PPL
in
in
in
in

TSO COMMAND PROC VOL4-LISTALC
TSO COMMAND PROC VOL5-LISTDS
TSO COMMAND PROC VOL6-PROFILE
TSO COMMAND PROC VOL6-RENAME
constructed by IKJEHREN
flowchart
format
M.O. diagram
use by IKJEHREN
use by IKJPARS

36
36
36
36

GY28-6774
GY28-6775
GY28-6776
GY28-6776

in TSO COMMAND PROC VOL6-TERMINAL 36
in TSO COMMAND PROC VOL6-WhEN/END 36
data area
in data directory
in TSO COMMAND PROCESSOR VOLl-ADD 36
data area
in directory
in TSO COMMAND PROCESSOR VOLl-CHNG 36
data area
in data area directory
in TSO COMMAND PROCESSOR VOL4-FREE 36
in TSO COMMAND PROCESSOR VOL6-RUN 36
in TSO TMP & SERVICE ROU'I'lNES
36
PPL, parse parameter list
in TSO COMMAND PROC VOL6-SUBMIT
36
PPL (IKJPARS parameter list)
in TSO COMMAND PROC VOL5-LISTCAT
36
description of
in TSO COMMAND PROC VOL6-PROTECT
36
description
PPL (parse parameter list)
in TSO COMMAND PROC VOL2-ALLOCATE 36
description
in operation
in TSO COMMAND PROCESSOR VOLl-LIST 36
format
use
in TSO COMMAND PROCESSOR VOL2-CALL 36
description
operation
used by
PPL (PARSE parameter list)
in T50 COMMAND PROC VOL2-DELETE
36
description
in operation
PPLxxx, fields in PPL
36
in TSO COMMAND PROC VOL4-LISTBC
in TSO COMMAND PROCESSOR VOL4-HELP 36
in TSO COMMAND PROCESSOR VOL6-SEND 36
description
use
PPL-IKJPARS parameter list
in TSO COMMAND PROCESSOR VOL4-EXEC 36
cross references
reference to
PPL XXX (fields in Parse Parameter List)
in TSO COMMAND PROC VOL5-0UTPUT
36

GY28-6776
GY~8-6776

GY28-677l
GY28-677l
GY28-6774
GY28-6776
GY28-6770
GY28-6776
GY28- 6775
GY28-6776
GY28-6772
GY28-677l
GY28-6772

GY28- 6772

GY28-6774
GY28- 6774
GY28-6776

GY28-6774

GY28-6775

PPLANS
---rn-TSO COMMANf' PROC VOL6-WHEN/END 36 GY28-6776
field in PPJ,
PPLANS, field in PPL
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-677l
PPLANS, in PPL
in TSO COMMAND PROC VOL6-SUBMIT
36 GY28-6776
PPLCBUF
in TSO COMMAND
field in PPL
PPLCBUF, field in
in TSO COMMAND
PPLCBUF, in PPL
in TSO COMMAND

PROC VOL6-WHEN/END

36 GY28-6776

PPL
PROCESSOR VOLI-CHNG 36 GY28-6771
PROC VOL6-SUBMIT

36 GY28-6776

PPLECB
---rn-TSO COMMAND PROC VOL6-WHEN/END 36 GY28-6776
field in PPL
PPLECB, field in PPL
in TSO COMMAND PROCESSOR VOLI-CHNG 36 GY28-6771
PPLECBF, in PPL
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

PPLECT
---rn-TSO COMMAND PROC VOL6-WHEN/END
field in PPL

36 GY28-6776

351

PPLECT - Preface

PPLECT, field in PPL
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

PRAlSW'
---rn-COBOL-TO-PL/l LCP

PPLECTF, in PPL
in TSO COMMAND PROC VOL6-SUBMIT

PRB
---in MVT SUPERVISOR
36 GY28-6659
PRB (program request block)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
format of

36 GY28-6776

PPLOAD (field in test communication table)
---rn-TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description of

29 GY33-7007

PPLPCL
in TSO COMMAND PROC VOL6-WHEN/END 36 GY28-6776
field in PPL
PPLPCL, field in PPL
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

PRBPROC subroutine
in MVT SUPERVISOR
function of

36 GY28-6659

PROESC
---rn-ALGOL-TO-PL/l LCP

29 GY33-7006

PPLPCLF, in PPL
in TSO COMMAND PROC VOL6-SUBMIT

PRDONE routine
---rn-COBOL (F)

24 GY28-6382

36 GY28-6776

PPLUPT
in TSO COMMAND PROC VOL6-WHEN/END 36 GY28-6776
field in PPL
PPLUPT, field in PPL
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
PPLUPT, IN PPL
in TSO COMMAND PROC VOL6-SUBMIT
36 GY28-6776
PPLUWA
---rn-TSO COMMAND PROC VOL6-WHEN/END 36 GY28-6776
field in PPL
PPLUWA, field in PPL
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
PPLUWA, in PPL
in TSO COMMAND PROC VOL6-SUBMIT
36 GY28-6776
PPLxxx" field in PPL
in TSO COMMAND PROC VOL1-DELETE
PPLxxx, fields of PPL
in TSO COMMAND PROC VOL5-LISTDS
PPLxxx field in PPL
in TSO COMMAND PROCESSOR VOL1-ADD
PPLxxx fields in PPL
in TSO COMMAND PROCESSOR VOL4-EXEC
PPNT
---rn GRAPHIC SUBRTN. PACKAGE

36 GY28-6771
36 GY28-6775

36 GY28-6774
25 GY27-7152

PPT
36 GY30-2011

PPTCB (field in test communication table)
TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description of

---rn

PPTR
---rn TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
label
PPWORKAR (problem program work area)
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
description
used
PQE
in MVT SUPERVISOR
in LINKAGE EDITOR (F)
in LOADER

36 GY27-7159
30 GY28- 660,4
30 GY28-6604
30 GY28-6604
36 GY28-7199
36 GY28-7199
36 GY28-7199
32 GY28-6614
36 GY28-6613

PREC
---rn PL/I SYNTAX CHECKER PLM
PRECFLAG (Precision flag)
in PL/I SYNTAX CHECKER PLM
attributes for ENTRY, PROCEDURE
for RETURNS attribute list
in ENTRY, PROCEDURE statements
Precision, binary data
in PL/I SUBROUTINE LIBRARY
Precision, decimal data
in PL/I SUBROUTINE LIBRARY
Precision, fixed-point data
in PL/I SUBROUTINE LIBRARY
Precision (keyword attribute)
in PL/I SYNTAX CHECKER PLM
attributes for ENTRY, PROCEDURE
checking of
in RETURNS attribute list
scale factor
significant digits
subroutine PREC (IKM136)
Precision option
in ALGOL-TO-PL/l LCP

29 GY33-8009
29 GY33- 8009

29 GY28-6801
29 GY28-6801
29 GY28-6801
29 GY33-8009

29 GY33-7006

36 GY28-6659

Precompiled procedure
in ALGOL (F) COMPILER
in ALGOL-TO-PL/l LCP'

26 GY33-8000
29 GY33-7006

31 GY28-6667
31 GY28-6714

PRECPDE, field in RUNPDL
in TSO COMMAND PROCESSOR VOL6-RUN

36 GY28-6776

29 GY33-7007

Preface
in COBOL (E)

24 GY24-S009

PRASG

---rn COBOL-TO-PL/l LCP

36 GY28-6660

36 GY28-6771

PPRB (field in test communication table)
---rn TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description of
in CRJE PLM

Pre-attach routine
---in MVT JOB MANAGEMENT
Pre-DGM Information module (IKAPROGM)
in GRAPHIC JOB PROCESSOR SUPPORT
Pre-format blocks, writing of
in SEQUENTIAL ACCESS METHODS
Pre-format channel programs
in SEQUENTIAL ACCESS METHODS
Pre-format extended search
in SEQUENTIAL ACCESS METHODS
Pre-Invocation Initiator Exit
routine
in TSO CONTROL PROGRAM
pre-prompt Exit Support
in TSO CONTROL PROGRAM
Pre-Prompt Installation Exit Support
in TSO CONTROL PROGRAM
Pre-scan of output directory-IEBCOPY
in UTILITIES
Pre-scan preparation routine
in JOB MANAGEMENT

Ii

352

Preface - Preserve
Preface
L--------------------------------------(continued)
in TSO COMMAND PROC VOL1-BROADCAST 36 GY28-6771
in TSO COMMAND PROC VOL1-SUBRTNS
36 GY28-6771
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
in TSO COMMAND PROC VOL4-LISTALC
36 GY28-6774
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
in TSO COMMAND PROC VOL6-PROFILE
36 GY28-6776
in TSO COMMAND PROC VOL6-PROTECT
36 GY28-6776
in TSO COMMAND PROC VOL6-RENAME
36 GY28-6776
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-6771
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776

Preloaded text
in LOADER
PREP DMY DIMAND PRINT ERRORS routine
----in FORTRAN IV (G) COMPILER
PREP EQUIV AND PRINT ERRORS routine
in FORTRAN IV (G) COMPILER
PREP NAMELIST routine
in FORTRAN IV (G) COMPILER

31 GY28-6714
25 GY28-6638
25 GY28-6638
25 GY28-6638

Preparation of cOlllIlUnications lines
for transmission
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Preparatory subroutine
in FORTRAN IV (H) COMPILER

25 GY28-6642

PREFBEG
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

Preprocessed mode
in EMULATOR FOR 7090/7094/709411

35 GY27-7187

PREFFLAG
in PLII SYNTAX CHECKER PLM

29 GY33-8009

Preprocessing
in ALGOL-TO-PL/l LCP

29 GY33-7006

Prefix
--:---rn-QUEUED TELECOMM. ACCESS METHOD
format
description and used by
Prefix, buffer
in TELECOMMUNICATION ACCESS METHOD
Prefix characters" TRM
in TCAM SERVICEABILITY AIDS
Prefix form
in PL/I (F) COMPILER
Prefix options (on-conditions)
in PL/I SUBROUTINE LIBRARY
Prefix record
in TCAM SERVICEABILITY AIDS
Prefix space
in TCAM SERVICEABILITY AIDS
Prefixed storage area
in INPUT/OUTPUT SUPERVISOR
defined in glossary
Prefixed storage area (PSA)
in INITIAL PROGRAM LOADER AND NIP
Prefixes
in PL/I SYNTAX CHECKER PLM
condition
label

30 GY30-2002

30 GY30-2029
30 GY30-2027
29 GY28-6800
29 GY28-6801
30 GY30-2027
30 GY30-2027

29 GY33-7007
35 GY27-7187
29 GY28-6800
GY27-7228

29 GY33-7007

30 GY28-6616
36 GY28-6661
29 GY33-8009

PREFTAB
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

PREFTEST
fn PL/I SYNTAX CHECKER PLM

29 GY33-8009

PREGEN
---rn-COBOL-To-PLll LCP

29 GY33-7007

Preliminary Error Analysis (PEA)
IGFMCH41
in MACHINE-CHECK HANDLER, M135/145
flowchart
module description
Preliminary Error Analysis (PEA)
module for the Model 165
in MACHINE-CHECK HANDLER, M155/165
Preliminary Error Analysis
module
in MACHINE-CHECK HANDLER, M135/145
Preliminary Error Pool
in ALGOL (F) COMPILER
Preliminary keyword checking
in PL/I SYNTAX CHECKER PLM
Preliminary scan
in FORTRAN IV (E)
of source statements

Preprocessor
in COBOL-TO-PL/l LCP
in EMULATOR FOR 7090/7094/709411
in PL/I (F) COMPILER
in aggregates phase
48-character set
in 7074 EMULATE FOR M/165
density checking
description
diagnostic aids
flowcharts
input
message handling
output
program organization
Preprocessor, COPY/INCLUDE
in COBOL-TO-PL/l LCP

30 GY27-7237

Prereguisite publication
in TSO COMMAND PROCESSOR VOL1-LIST
Prerequisite publications
in TSO COMMAND PROC VOL1-BROADCAST
in TSO COMMAND PROC VOLl-SUBRTNS
in TSO COMMAND PROC VOL2-DELETE
in TSO COMMAND PROC VOL4-LISTALC
in TSO COMMAND PROC VOLS-LISTCAT
in TSO COMMAND PROC VOL5-LISTDS
in TSO COMMAND PROC VOL6-PROFILE
in TSO COMMAND PROC VOL6-PROTECT
in TSO COMMAND PROC VOL6-TERMINAL
in TSO COMMAND PROCESSOR VOL1-ADD
in TSO COMMAND PROCESSOR VOL1-CHNG
in TSO COMMAND PROCESSOR VOL2-CALL
in TSO COMMAND PROCESSOR VOL4-FREE
in TSO COMMAND PROCESSOR VOL4-HELP
in TSO COMMAND PROCESSOR VOL6-RUN
in TSO COMMAND PROCESSOR VOL6-SEND
Prerequisites
in PL/I SYNTAX CHECKER PLM
PRESCA
---rn-COBOL-TO-PL/l LCP

36 GY28-6171
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36

GY28- 6171
GY28-6171
GY28- 6772
GY28-6174
GY28- 6175
GY28-6175
GY28-6176
GY28- 6176
GY28-6176
GY28-6171
GY28-6771
GY28-6172
GY28-6174
GY28- 6174
GY28-6176
GY28-6176

29 GY33-8009
29 GY33-7007

30 GY27-7198
30 GY27-7237
26 GY33-8000
29 GY33-8009
25 GY28-6601

Preservation of the CPU
environment
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
Preserve routines
in MVT SUPERVISOR
description of
entry point names of
flowchart of
module name for

36 GY28-6659

353
PRESRES member of IPL/NIP parameter list
data set
in JOB MANAGEMENT
36 GY28-6613
PRl!:SS MEMORY
in FORTRAN IV (G) COMPILER

25 GY28-6638

Pretranslator logical phase, control passed
to
in PL/I (F) COMPILER
29 GY28-6800
PJ:{l!.UPDATEREDEF
in COBOL-TO-PL/1 LCP

29 GY33-7007

PRFNDFLG, field in CFLAGS
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
PRFRM compilations
in FORTRAN IV (E)
25 GY28-6601
blocking compiler output for
constructing text buffer chains
for
control flow for
data control block manipulation
for
deblocking compiler input for
linkages to performance module for
main storage allocation for
obtaining main storage for
opening data control blocks for
restart condition for
PRFTWO routine
---rn-COBOL (F)

24 GY28-6382

PRGEND routine
---rn-COBOL (F)

24 GY28-6382

PRI parameter in the GJOBCTL
macro instruction
in S/360 JOB PROCESSING 1130/2250
PRI parameter on the GJOBCTL macro
instruction
in GRAPHIC JOB PROCESSOR SUPPORT

36 GY27-7166
36 GY27-7159

Primary adjective code
in FORTRAN IV (H) COMPILER
25
Primary console switching, functions of
36
in JOB MANAGEMENT
Primary control program
in SYSTEM CONTROL BLOCKS
36
Primary error
in MACHINE-CHECK HANDLER, S360 M65 31
Primary path
25
in FORTRAN IV (H) COMPILER
Primary SYSRES device
in MACHINE-CHECK HANDLER, S360 M65 31

GY28-6642
GY28-6613
GC28-6628
GY27-7155
GY28-6642
GY27-7155

Prime area
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
allocation
with embedded index

PRESRES - Printed
Prime data area
in INDEXED SEQUEN. ACCESS METHOD
adding records to
pointers to
Prime data track, shared
in INDEXED SEQUEN. ACCESS METHOD
PRIME routine
in COBOL (F)
priming input buffers
in SEQUENTIAL ACCESS METHODS
introduction to
exchange buffering
simple buffering
Update mode
stage 3 Open executor

30 GY28-6618

30 GY28-6618
24 GY28-6382
30 GY28-6604

PRINT

---rn

ALGOL-TQ-PL/1 LCP
29
in ASSEMBLER (F)
21
Print, parallel
in ONLINE TEST EXECUTIVE PROGRAM
37
PRINT (keyword attribute)
in PL/I SYNTAX CHECKER PLM
29
attribute classification
in OPEN statement
PRINT A LINE routine
in FORTRAN IV (G) COMPILER
25
PRINT AND READ SOURCE routine
in FORTRAN IV (G) COMPILER
25
Print buffer in common area
in ONLINE TEST EXECUTIVE PROGRAM
37
Print control operation requests
in FORTRAN IV (E)
25
compile-time processing of
Print Dump Service Aid program
in TSO CONTROL PROGRAM
36
PRINT file
in FORTRAN IV-TO-PL/1 LCP
29
Print header -- IFDOLT14
in ONLINE TEST EXECUTIVE PROGRAM
37
Print heading buffer format (Phase F8)
in ASSEMBLER (F)
21
PRINT HEADING routine
in FORTRAN IV (G) COMPILER
25
Print line buffer format (Phase F8)
in ASSEMBLER (F)
21
PRINT/NOPRINT option
31
in LOADER
PRINT statement
in FORTRAN IV-TO-PL/1 LCP
29
PRINT-SWITCH
in COBOL (F)
24
in COBOL-TO-PL/1 LCP
29
PRINT TOTAL PROG REQMTS MESS routine
in FORTRAN IV (G) COMPILER
25
PRINTB
~ASSEMBLER (F)
21
PRINTED RECORD
in S/360 JOB PROCESSING 1130/2250 36
processed by IKADIA
printing at subsystem
Printed record
in GRAPHIC JOB PROCESSOR SUPPORT
36
option on LOG ON frame
transfer of data to output data set.

GY33-7006
GY26- 3700
GY28-6651
GY33- 8009

GY28-6638
GY28-6638
GY28-6651
GY28-6601
GY28-7199
GY33-7000
GY28-6651
GY26- 3700
GY28-6638
GY26-3700
GY28-6714
GY33-7007
GY28-6382
GY33-7007
GY28-6638
GY26-3700
GY27-7166

GY27-7159

354

Printed - Problem

Printed record
I in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
L--------------------------------------(continued)
written by IKADIA
PRINTED RECORD
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
processed by IKADIA
printing at subsystem
Printer, as the usual output device
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
Printer, 3211
in SEQUENTIAL ACCESS METHODS
30 GY28-6604
Printer control character
in ALGOL-TO-PL/1 LCP
29 GY33-7006
Printer output routed to console
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
Printer Translate routine (IITURCEB)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
Printer with UCS feature
in SEQUENTIAL ACCESS METHODS
30 GY28-6604
Printing and punching records
in UTILITIES
32 GY28-6614
Printing messages-IE3DG
in UTILITIES
32 GY28-6614
Printmsg table
in FORTRAN IV (G) COMPILER
25 GY28-6638
Prior history
in TSO COMMAND PROC VOL6-SUBMIT
Priorities, list of in TCAM
in TELECOMMUNICATION ACCESS METHOD
Priority
in MFT SUPERVISOR
changing
dispatching
limit
in MVT JOB MANAGEMENT
for entry enqueueing
initiator
interpreter

36 GY28-6776

in TELECOMMUNICATION ACCESS METHOD
Priority queuing
in INPUT/OU'l'PUT SUPERVISOR
diagram
explanation
Priority-release emulation
in 7074 EMULATE FOR M/165
Priority search subroutine
in QUEUED TELECOMM. ACCESS ~iliTHOD
Priority subroutine
in PL/I SUBROUTINE LIBRARY
PRIORJCL
in TSO COMMAND PROC VOL6-SUBMIT
in history
used
Private code (PC)
in LINKAGE EDITOR (F)
definition
entry processing
marked delete
in LOADER
Private data, concatenation of
in TSO COMMAND PROCESSOR VOL4-HELP
Private files
in CRJE PLM
Private library
in ONLINE TEST EXECUTIVE PROGRAM
Private work areas
in PL/I SYNTAX CHECKER PLM

30 GY30-2029
30 GY28-6616

GY27-7228
30 GY30-2002
29 GY28-6801
36 GY28-6776

31 GY28-6667

31 GY28-6714
36 GY28-6774
36 GY30-2011
37 GY28- 6651
29 GY33-8009

30 GY30-2029
36 GY27-7236

36 GY28-6660

PRLAB1
---rn-COBOL-TO-PL/l LCP

jOb

queue entry
in PL/I SUBROUTINE LIBRARY
29
change
control task
dis patching
limit
PRIORITY, built-in function
in PL/I SUBROUTINE LIBRARY
29
Priority, in LOCINFOA
in TSO COMAND PROC VOL2-CNCL/STATUS36
Priority, job
in CONTROL PROGRAM WITH MFT
36
PRIORITY, pseudo-variable
in PL/I SUBROUTINE LIBRARY
29
PRIORITY (post code)
in PL/I SUBROUTINE LIBRARY
29
Priority-control emulation
in 7074 EMULATE FOR M/165
PRIORITY macro expansion linkage
in TELECOMMUNICATION ACCESS METHOD 30
Priority masks
in 7074 EMULA'l'E FOR M/165
Priority mode routine
in QUEUED TELECOMM. ACCESS METHOD 30
chart
Priority of machine-check
interruptions
in MACHINE-CHECK HANDLER, M135/145 30
Priority of subtasks
in QUEUED TELECOMM. ACCESS METHOD 30
Priority of subtasks on a QCB
in TELECOMMUNICATION ACCESS METHOD 30
PRIORITY parameter list
in TELECOMMUNICATION ACCESS METHOD 30
Priority QCB

Privileged DIL9 instruction
in EMULATOR FOR 7090/7094/709411
Privileged macro-time routine--BISAM
in INDEXED SEQUEN. ACCESS METHOD
description
f low diagrams
modules
pointers to

35 GY27-7187
30 GY28- 6618

29 GY33-7007

GY28-6801
PRLEN, field in NLST'l'AB
TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

---rn

PRMPTMBR, processing at
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
GY28-6801
GY28-6772

PRMPTYPE label
in TSO COMMAND PROCESSOR VOL6-RUN
in flowchart

36 GY28-6776

GY27-7128
GY28-6801
GY28-6801

PRMPT1, processing at
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
PRNMxxX, field in PRNMI0B
in TSO COMMAND PROC VOLI-DELETE

36 GY28-6771

PRNMI0B, data area
in TSO COMMAND PROC VOLI-DELETE

36 GY28-6771

PRNTHEAD routine
in FORTRAN IV (G) COMPILER

25 GY28-6638

PRNTMSG routine
in FORTRAN IV (G) COMPILER

25 GY28-6638

PRNT2 subroutine, function of
in S/360 JOB PROCESSING 1130/2250

36 GY27-7166

PRNT3 subroutine, function of
in S/360 JOB PROCESSING 1130/2250

36 GY27-7166

GY27-7228
GY30-2029
GY27-7228
GY30-2002

GY27-7237
GY30-2002
GY30-2029
GY30-2029

Problem oriented routines
in GRAPHICS PROBLEM ORIENTED RTNS. 30 GY27-7110

355
Problem oriented routines
I in GRAPHICS PROBLEM ORIENTED RTNS. 30 GY27-7110
l--------------------------------------(continued)
GARC
GCGRID
GCPRNT
GLABEL
GPGRID
GPVGRD
GSDPLT
GSPLOT
GSVPLT
GVARC
PENTRK
Problem oriented routines (PORs)
in GRAPHICS ACCESS METHOD
30 GY27-7113
Problem program
in CONTROL PROGRAM WITH MFT
36 GY27-7128
definition of
large partition scheduling
small partition scheduling
in TESTRAN
37 GY28-6611
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
list of
loaded by CALL
return code
Problem program interface
in GRAPHICS PROBLEM ORIENTED RTNS. 30 GY27-7110
Problem program mode
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Problem program save area
in FORTRAN IV (8) COMPILER
25 GY28-6642
Problem program work area
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
Problem programs
in ASSEMBLER (F)
21 GY26-3700
PROBLNTH, field in DTATEL
~n TSO COMMAND PROCESSOR VOL1-ADD

36 GY28-6771

PROC statement
36 GY28-6613
~n JOB MANAGEMENT
36 GY28-6660
in MVT JOB MANAGEMENT
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
processing of
usage
PROCADDR,
in TSO
PROCADDR,
in TSO

field in CALLPARM
COMMAND PROC VOL5-0PERATOR 36 GY28-6775
field in CTRLTAB
COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

PROCDATT, field in DTATBL
in TSO COMMAND PROCESSOR VOL1-ADD

36 GY28-6771

PROCDIS
in COBOL-TO-PL/l LCP

29 GY33-7007

PROCDPCE, field in PARSMACS
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
PROCED
in ALGOL-TO-PL/l LCP
Procedure
in ALGOL (F) COMPILER
in ALGOL-To-PL/l LCP
body
call table
declaration
declarations" numbering of
headings
identification
identifier
in internal code
simple

29 GY33-7006
26 GY33-8000
29 GY33-7006

Problem - Procedure
statements
with parameters
in GRAPHIC JOB PROCESSOR SUPPORT
36
in s/360 JOB PROCESSING 1130/2250 36
PROCEDURE
in ALGOL-TO-PL/l LCP
29
in FORTRAN IV-To-PL/1 LCP
29
Procedure, cataloged
in MVT JOB MANAGEMENT
36
Procedure, command
in TSO COMMAND PROCESSOR VOL4-EXEC 36
Procedure, current
in TSO COMMAND PROC VOL6-WHEN/END 36
Procedure, in input stream
in MVT JOB MANAGEMENT
36
Procedure, in-stream
in MVT JOB MANAGEMENT
36
PROCEDURE (keyword statement)
in PL/I SYNTAX CHECKER PLM
29
attributes in
checking of
classification of attributes in
options in
Precision attribute flag (PRECFLAG)
subroutine PROCENTR (IKM22)
Procedure A-Text
in COBOL (F)
24
definition
formats
Procedure call
in ALGOL (F) COMPILER
26
Procedure calls
in PL/I (F) COMPILER
29
Procedure data block
in TSO COMMAND PROCESSOR VOL1-ADD 36
Procedure declaration
in ALGOL (F) COMPILER
26
in Identifier Table
in intermediate source text
internal name
object code
Procedure Division
in COBOL (E)
24
in COBOL (F)
24
Procedure Division I/O
in COBOL (E)
24
Procedure Division Literals
in COBOL (E)
24
Procedure Division Merge
in COBOL (E)
24
Procedure Division syntax Scan
in COBOL (E)
24
Procedure element
in TSO TMP & SERVICE ROUTINES
36
PROCEDURE-ENTRY-BEGIN chain
in PL/I (F) COMPILER
29
Procedure Handling Routine (IKAPROCO)
36
in GRAPHIC JOB PROCESSOR SUPPORT
chart
description of
in S/360 JOB PROCESSING 1130/2250 36
chart
description of
Procedure IC-Text
in COBOL (F)
24
definition
formats
Procedure library
36
in CONTROL PROGRAM WITH MFT
in JOB MANAGEMENT
36
in MVT JOB MANAGEMENT
36
address of
definition of
input from
opening of
Procedure -name

GY27-7159
GY27-7166
GY33-7006
GY33-7000
GY28-6660
GY28-6774
GY28-6776
GY28-6660
GY28-6660
GY33- 8009

GY28-6382

GY33-8000
GY28-6800
GY28-6771
GY33-8000

GY24-5009
GY28-6382
GY24-5009
GY24-5009
GY24-5009
GY24-5009
GY28-6770
GY28-6800
GY27-7159
GY27-7166

GY28-6382

GY27-7128
GY28-6613
GY28-6660

Procedure - Processing

356

Procedure-name
L--------------------------------------(continued)
in COBOL-TO-PL/l LCP
29 GY33-7007
table (PARADICT)
standard name
sort name
in TSO COMMAND PROC VOLI-DELETE
36 GY28-6771
area
command list flags
data blcok
deletion indicator
list, current
number of
offset
offset block
pointers to
in TSO COMMAND PROCESSOR VOLI-CHNG 36 GY28-6771
data block
length
level
offset block
routine (IKJEFA23)
size key
in TSO COMMAND PROCESSOR VOLI-LIST 36 GY28-6771
level
search for
Procedure Name Definition Elements
in COBOL (F)
24 GY28-6382
Procedure A-Text format
Procedure Name Definitions
in COBOL (F)
24 GY28-6382
Procedure IC-Text format
Procedure Name Entries
in COBOL (F)
24 GY28-6382
Dictionary Entry format
Procedure Name Reference elements
in COBOL (F)
24 GY28-6382
Procedure Name References
in COBOL (F)
24 GY28-6382
Procedure A-Text format
Procedure IC-Text format
Procedure names
in TSO COMMAND PROCESSOR VOLI-ADD 36 GY28-6771
data attributes
data block
length
offset to
Procedure names, equate strings for
in COBOL (F)
24 GY28-6382
Procedure override table
in MVT JOB MANAGEMENT
36 GY28-6660
Procedure records
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
Procedure size, index
in TSO COMMAND PROCESSOR VOLI-ADD 36 GY28-6771
PROCEDURE statement
in FORTRAN IV-TO-PL/l LCP
29 GY33-7000
PROCEDURE statements, count
in PL/I (F) COMPILER
29 GY28-6800
Proceed light
in JOB MANAGEMENT

36 GY28-6613

PROCENTR
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

PROCENTY routine
in LINKAGE EDITOR (F)

31 GY28-6667

Process control block (PCB)
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
PROCESS DO LOOPS routine
in FORTRAN IV (G) COMPILER
25 GY28-6638
Process entry
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Process entry work area

in TELECOMMUNICATION ACCESS METHOD
PROCESS LBL AND LOCAL SPROGS routine
in FORTRAN IV (G) COMPILER
PROCESS POLISH routine
in FORTRAN IV (G) COMPILER
Process Record Descriptions
in COBOL (E)
Process statements
in TSO COMMAND PROC VOL6-SUBMIT
Process-time overlap
in PL/I SUBROUTINE LIBRARY
Processable String
in COBOL (E)
Processing
in COBOL-TO-PL/l LCP
ALTER statement
arithmetic statement
CALL statement
CLOSE statement
condition-name
ENTRY statement
FD entry
FILE-CONTROL paragraph
FR record
GO TO statement
independent item
input/output statement
I-O-CONTROL paragraph
OPEN statement
PERFORM statement
RE with REDEFINES
READ statement
record description
record description entry
RQ record
REWRITE statement
SD record
SO entry
Sort feature
SPECIAL-NAMES paragraph
test-condition
WRITE statement
in GRAPHIC JOB PROCESSOR SUPPORT
an attention
a parameter frame
a select frame
in TSO COMMAND PROC VOL2-ALLOCATE
ABEND
attention interrupt
initialization
in TSO COMMAND PROC VOL4-LISTBC
block on diagram
error
input
MAIL records
mainline
NOTICES records
output
termination
in TSO COMMAND PROC VOL6-RENAME
summary of
initialization
mainline
in TSO COMMAND PROCESSOR VOLI-ADD
overview
summary
in TSO COMMAND PROCESSOR VOL4-EXEC
EXEC overview
of PROC statement
summary
in TSO COMMAND PROCESSOR VOL4-HELP
commands member
in the read routine of HELP
request for HELP
routine in HELP
subsearch for a subcommand

30 GY30-2029
25 GY28-6638
25 GY28-6638
24 GY24-5009
36 GY28-6776
29 GY28-6801
24 GY24-5009
29 GY33-7007

36 GY27-7159

36 GY28-6772

36 GY28-6774

36 GY28-6776

36 GY28-6771
36 GY28-6774

36 GY28-6774

357
Processing. ABEND
36
in TSO COMMAND PROC VOL5-LIS'I'CAT
Processing. attention
interruption
in TSO COMMAND PROC VOL5-LISTCAT
36
Processing a TRM
in TCAM SbRVIC~ABILITY AIDS
30
remote
system console
Processing ACCOUNT subcommands
in TSO COMMAND PROCESSOR VOL1-ACC'I' 36
Processing control module
in LOADER
31
Processing data
in 7074 EMULATE FOR ~~165
unit record emulation
tape emulation
overlapping I/O
Processing end-of-volume
conditions
in FORTRAN IV (G) COMPILER
25
Processing input/output errors
in s/360-1130 DATA TMN. - FORTRAN 25
general information about
in System/360
in 1130 system
Processing input/output
interruptions
in S/360-1130 DATA TMN. - FORTRAN 25
general information about
in System/360
in 1130 system
Processing of an application program
in TELECOMMUNICATION ACCESS METHOD 30
Processing phase
in INDEXED SEQUEN. ACCESS METBoD
30
BISAM
load mode
scan mode
Processing phases
in UPDATE ANALYSIS PROGRAM
36
Processing procedures for ATLAS
in UTILITIES
32
Processing program
in PL/I (F) COMPILER
29
in SEQUENTIAL ACCESS METHODS
30
relation to SM~ routines
Processing programs
in ASSEMBLER (F)
21
Processing routines
in UPDATE ANALYSIS PROGRAM
36
Processing routines. OLT
in TCAM SERVICEABILITY AIDS
30
Processing summary
in TSO COMAND PROC VOL2-CNCL/STATUS36
Processing VS records
in UTILITIES
32
Processor. arithmetic
in COBOL-To-PL/1 LCP
29
Processor. functions
in TSO COMMAND PROC VOL6-WHEN/END 36
Processor. post
in TESTRAN
37
Processor data table search service
routine
in TSO COMMAND PROCESSOR VOL3-EDIT 36
Processor Routines
in S/360 JOB PROCESSING 1130/2250 36
Begin Job
Cancel Job
Describe Data
Enter Data
Log Off
Log On
Recall
Specify Job step

GY28-6775
GY28-6775
GY30-2027

GY28-6771
GY28-6714
GY27-7228

GY28-6638

Processing - Production

Write Message
Processor storage
in MACHINE-CHECK HANDLER. M155/165 30
Processor Storage Analysis
in MACHINE-CHECK HANDLER. S360 M65 31
theory
Processor storage requirements. ACCOUNT
command
in TSO CO~~ND PROCESSOR VOL1-ACCT 36
Processor work area (CCTPWKA)
in GRAPHIC JOB PROCESSOR SUPPORT
36
posi t i on in CCT
used to pass information

GY27-7198
GY27-7155

GY28-6771
GY27-7159

PROCEXIT. in routine directory
in TSO CO~ll~ND PROCESSOR VOL1-ADD

36 GY28-6771

PROCFLAG. field in WORKAREA
-- in TSO CO~~ND PROC VOL5-0PERATOR

36 GY28-6775

PROCKEY
in COBOL-TO-PL/l LCP

29 GY33-7007

PROCJ:IIJ
in ALGOL-To-PL/1 LCP

29 GY33-7006

GY27-7161

GY27-7161

Procname data block (DROBD)
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771
Procname offset block (DROB)
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-677l
PROCNM
---rn-TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

GY30-2029
GY28-6618

GY28-7106
GY28-6614
GY28-6800
GY28-6604
GY26-3700

PROCP
in ALGOL-TO-PL/l LCP

29 GY33-7006

PROCPIC
in COBOL-TO-PL/l LCP

29 GY33-7007

PROCSIZE
in TSO CO~~D PROCESSOR VOL1-CHNG 36 GY28-6771
PDE for
key
PROCSUBF. field in CHNGPDL
..,
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

IIUI

PROCxxxx. fields in NDLSTPDL
in TSO COMMAND PROCESSOR VOL1-ADD

36 GY28-6771

PROCO 1 routine
in COBOL (F)

24 GY28-6382

PROC02 routi ne
- r r lCOBOL (F)

24 GY28-6382

PROD (arrays)
in PL/I SUBROUTINE LIBRARY

29 GY28-6801

PRODSN field in IKJPARMD
-rrlTSO COMMAND PROC VOL6-PROTECT

36 GY28-6776

GY28-7106
GY30-2027
GY28-6772
GY28-6614
GY33-7007
GY28-6776
GY28-6611
GY28-6773
GY27-7166

Product-temporary-fix
in UPDATE ANALYSIS PROGRAM
36 GY28-7106
Production of object code
in FORTRAN IV (G) COMPILER
25 GY28-6638
branches
computed GO TO statement
DEFINE FILE statement
direct-access READ and WRITE statements
DO loops
DO statement
FIND statements
FORMAT statements
formatted arrays

358

Production - Program
Production of object code
I in FORTRAN IV (G) COMPILER
25 GY28-663B
L--------------------------------------(continued)
formatted list items
functions
input/output
PAUSE statement
READ and WRITE statements
statement functions
STOP statement
subroutines
unformatted arrays
unformatted ~AD and WRITE statements
PROF ---rn TSO COMMAND PROCESSOR VOL3-EDIT 36 GY2B-6773
Profile. user
in TSO COMMAND PROCESSOR VOL3-£DIT 36 GY2B-6773
definition
PROFILE subcommand
in TSO COMMAND PROCESSOR VOL3-EDI~ 36 GY2B-6773
summary of operations
syntax
Profile table. pointer to
in TSO COMMAND PROC VOL1-DELETE
36 GY2B-6771
PROFLGS. field in DTATBL
in TSO COMMAND PROCESSOR VOL1-ADD

36 GY2B-6771

PROF'Il'lSGS CSECT
in TSO COMMAND PROC VOL6-PROFILE

36 GY2B-6776

PROGID

---rnCOBOL

(F)

Program
in ALGOL (F) COMPILER
in LINKAGE EDITOR (F)
modification
organization
in MACHINE-CHECK HANDLER. M155/165
damage
refreshing
termination
in PL/I SYNTAX CHECKER PLM
flow
between modules
CPU
functions
modules
flow between
hierarchy of
organization
subfunctions
in TSO COMMAND PROC VOL4-LISTBC
flowcharts
logic
method of operation
diagrams
text
organization
in 7074 EMULATE FOR M/165
emulator
postprocessor
preprocessor
Program area of storage
in INTRO. TO CONTROL PROGRAM LOGIC
Program block heading entry
in ALGOL (F) COMPILER
Program Block Number
in ALGOL (F) COMPILER
Program Block Number Table
in ALGOL (F) COMPILER
Program Block Table (object time)
in ALGOL (F) COMPILER

24 GY2B-63B2
26 GY33-BOOO
31 GY2B-6667
30 GY27-719B

29 GY33-B009

Program Block Table II
in ALGOL (F) COMPILER
26
Program Block Table III
in ALGOL (F) COMPILER
26
Program Block Table IV
in ALGOL (F) COMPILER
26
PROGRAM BREAK variable
in FORTRAN IV (G) COMPILER
25
Program-check
in MFT SUPERVISOR
36
first-level interruption
handler
entry point
flowchart
functional description
module description
module synopsis
New PSW
Old PSW
in TESTRAN
37
Program Check First-Level Interruption
Handler
in MVT SUPBRVISOR
36
Program check handler
in INPUT/OUTPUT SUPERVISOR
30
Program check handling
in PL/I (F) COMPILER
29
Program-check interrupt
in MACHINE-CHECK HANDLER. ~"135/145 30
Program-check new PSW
in MACHINE-CHECK HANDLER. ~135/145 30
program check recovery subroutine
in INPUT/OUTPUT SUPERVISOR
30
program Common Data
in COBOL (E)
24
Program Context Matrix
in ALGOL (F) COMPILER
26
Program control cards.
Postprocessor
in 7074 EMULATE FOR W165
Program controlled interrupt (PCI)
appendage 
in TSO COMMAND PROC VOL5-0UTPUT
36 GY28-6775
description
in operation
Queue control record, in LOCDQPRM
in TSO COMAND PROC VOL2-CNCL/STATUs36 GY28-6772
Queue control record (QCR)
in CONTROL PROGRAM WITH MFT
36 GY27-7128
contents of
format of
queue alter routine use of
36 GY28-6660
in MVT JOB MANAGEMENT
access to
contents of
format of
36 GY28- 6775
in TSO COMMAND PROC VOL5-0UTPUT
Queue data set
36 GY28-6660
in MVT JOB MANAGEMENT
formatting of
Queue data set (SYS1.JOBQE)
36 GY28- 6775
in TSO COMMAND PROC VOL5-0UTPUT
Queue element
36 GY30-2011
in CRJE PLM
36 GY28-7199
in TSO CONTROL PROGRAM
Queue element (QEL)
36 GY27-7236
in MFT SUPERVISOR
Queue element (QEL) fer serializing the use
of a resource
36 GY28-6659
in MVT SUPERVISOR
abnormal release ef
construction of
format of
normal release of
Queue entry
36 GY28-6775
in TSO COMMAND PROC VOL5-0UTPUT
Queue entry block (QEB)
36 GY30-2005
in REMOTE JOB ENTRY
I
Queue entry construction

371
Queue entry construction
L--------------------------------------(continued)
in MVT JOB MANAGEMENT
36 GY28-6660
Queue entry pointer table entries
(Table C)
in MVT JOB MANAGEMENT
36 GY28-6660
Queue entry processing
in JOB MANAGEMENT
36 GY28-6613
Queue full condition
in MVT JOB MANAGEMENT
36 GY28-6660
Queue insert by priority subtask
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
Queue insert subroutine
in QUEUED TELECOMM. ACCESS ME.THOD 30 GY30-2002
Queue insert subtask
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
Queue management
in CONTROL PROGRAM WITH MFT
36 GY27-7128
Queue management assign and start routines
in JOB MANAGEMENT
36 GY28-6613
Queue Management Delete Routine
(IEFQDELQ)
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
Queue Management Dequeue Routine
(IEFQMDQQ)
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
Queue Management Enqueue Routine
(IEFQMNQQ)
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
Queue management in an MCP
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
disk I/O management routines
main storage queuing with disk
backup
main storage queuing
multiple arm support
nonreusable disk queuing
queuing management routines
reusable disk queuing
special queuing considerations
Queue Management Parameter Area (QMPA)
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
Queue management read routine
in JOB MANAGEMENT
36 GY28-6613
Queue Management Read/Write Routine
(IEFQMRAW)
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
Queue management routines
in TSO COMMAND PROC VOL5-0UTPUT
36 GY28-6775
Queue Management Unchain Routine
(IEFQMUNC)
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
Queue Manager Delete Routine
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
(IEFQDELQ)
QUEUE Manager Dequeue Routine
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
(IEFQMDQQ)
Queue Manager Enqueue Routine
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
(IEFQMNQQ)
Queue manager interface routine
in JOB MANAGEMENT
36 GY28-6613
Queue manager parameter area
in JOB MANAGEMENT
36 GY28-6613
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
(QMPA)
Queue manager parameter area (QMPA)
in CONTROL PROGRAM WITH MFT
36 GY27-7128
in MVT JOB MANAGEMENT
36 GY28-6660
address of
format and description of
function of
initiator use of
interpreter use of
Queue Manager Read/Write

Queue - Quiesce
Routine (IEFQMRAW)
in S/360 JOB PROCESSING 1130/2250 36
Queue manager routine
in REMOTE JOB ENTRY
36
Queue Manager Unchain Routine
in S/360 JOB PROCESSING 1130/2250 36
(IEFQMUNC)
Queue manipulation cOll'.mands
in MVT JOB MANAGEMENT
36
Queue number 55
in TSO COMMAND PROC VOL6-SUBMIT
36
Queue routines
in MVT JOB MANAGEMENT
36
descriptions of
Queue search
in TSO COMAND PROC VOL2-CNCL/STATUS36
routine
operation
Queue searching for job commands
in MVT JOB MANAGEMENT
36
Queue service time. definition
of
in TSO CONTROL PROGRAM
36
Queue space assignment
in MVT JOB MANAGEMENT
36
Queued sequential access method
in SEQUENTIAL ACCESS METHODS

Quick link output
in FORTRAN IV (G) COMPILER
Quiesce
in TSO CONTROL PROGRAM
definition of

GY30-2005
GY27-7166
GY28-6660
GY28-6776
GY28-6660
GY28-6772

GY28-6660
GY28-7199
GY28-6660

30 GY28-6604

Queues
in INDEXED SEQUEN. ACCESS METHOD
30
BISAM load mode
scan mode
in ONLINE TEST EXECUTIVE PROGRAM
37
OLTEP
reply
task DEB
in TSO COMAND PROC VOL2-CNCL/STATUS36
hold
input
output
submit
Queues and QCBs list
in TELECOMMUNICATION ACCESS METHOD 30
Queues of TCAM dispatcher
in TELECOMMUNlCAT ION ACCESS METHOD 30
Queuing
in CRJE PLM
in INPUT/OUTPUT SUPERVISOR
scheduling I/O
termina ting I/O
Queuing management routines
in TELECOMMUNICATION ACCESS METHOD,
Queuing methods
in INPUT/OUTPUT SUPERVISOR
FIFO
diagram
explanation
ordered seek
diagram
explanation
priority
diagram
explanation
Queuing routine (QUEING)
in EMULATOR FOR 7090/7094/709411
description
flowchart

GY27-7166

GY28-6618
GY28-6651

GY28-6772

GY30-2029
GY3o- 2029

36 GY30-2011
30 GY28-6616

30 GY30-2029
30 GY28-6616

35 GY27-7187

25 GY28-6638
36 GY28-7199

IIIir
~

372

Quiesce - RCB

in PL/I SUBROUTINE LIBRARY
R-type FREEMAIN macro
in PL/I SUBROUTINE LIBRARY
R-type GETMAIN macro
in PL/I SUBROUTINE LIBRARY

Quiesce
I in TSO CONTROL PROGRAM
36 GY28-7199
L--------------------------------------(continued)
operation of
Quiesce channel, routine for
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
QUIESCE command
in MVT JOB MANAGEMENT
36 GY28-6660
Quiesce complete subroutine
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
Quiesce option
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
Quiesce Parameter List
in TSO CONTROL PROGRAM
36 GY28-7199

---yn

Quiet mode
in MACHINE-CHECK
in MACHINE-CHECK
QUIET parameter for
command
in MACHINE-CHECK

HANDLER, M135/145 30 GY27-7237
HANDLER. M155/165 30 GY27-7198
MODE

RAM=
----in MFT SUPERVISOR
entry

HANDLER. M155/165 30 GY27-7198

Random data generation, routine for
in ONLINE TEST EXECUTIVE PROGRAM
Random data generator
in ONLINE TEST EXECUTIVE PROGRAM
Random number generator-IEBDG
in UTILITIES

C/UIT
in TSO COMMAND PROC VOL6-SUBMIT
in history
used

36 GY28-6776

QUOT
in ALGOL-TO-PL/1 LCP

29 GY33-7006

Quotation mark
in ALGOL-To-PL/l LCP
29 GY33-7006
Quotation marks, use of
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
Quote
in FORTRAN IV (G) COMPILER
definition
description
location in storage
QBASE
Quote (')
in PL/I SYNTAX CHECKER PLM
enclosing character string
enclosing PICTURE specification
Quote base (QBASE)
in FORTRAN IV (G) COMPILER
definition
description
C/uote separator
in ALGOL-TO-PL/l LCP
Quote string
in TSO COMMAND PROCESSOR VOL4-EXEC
QVAR table
in COBOL (F)
format

25 GY28-6638

29 GY33-8009

Radix change
PL/I SUBROUTINE LIBRARY

29 GY28-6801
29 GY28-6801
29 GY28-6801
29 GY28-6801

loading, (IPL) process
in SEQUENTIAL ACCESS METHODS
30 GY28-6604
RAM option specified in system generation
process and used in initial program
RAM parameter
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661

Range. of IMPLICIT statement
in FORTRAN IV SYNTAX CHECKER PLM

36 GY27-7236

37 GY28-6651
37 GY28-6651
32 GY28-6614
25 GY28-6831

in MVT SUPERVISOR
36
RB (request block)
in TSO COMMAND PROCESSOR VOL7-TEsT 36
program request block (PRB). format
altering fields of
RB flags
in MVT SUPERVISOR
36
RB old PSW
in MVT SUPERVISOR
36
saving of
in TSO COMMAND PROCESSOR VOL7-TEST 36
RB record
in COBOL-TO-PL/l LCP
29

GY28-6659
GY28-6777
of
GY28-6659
GY28-6659
GY28-6777
GY33-7007

RBA

25 GY28-6638

29 GY33-7006
36 GY28-6774
24 GY28-6382

QWAIT
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
from problem program
from internal implementation subtask

---in TSO COMMAND PROC VOL4-LISTBC
36 GY28-6774
for exclusive ENQ
for READ and feedback
for WRITE operation
RBA (relative block address)
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
in IEEVSDIO
in operation
RBOPSW

~TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777

RBQUEUED subroutine
in MVT SUPERVISOR

36 GY28-6659

RBREMOVE subroutine
in MVT SUPERVISOR

36 GY28-6659

RC

B-

in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
R (ENVIRONMENT option)
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
R (relocation) pointer
in LINKAGE EDITOR (F)
31 GY28-6667
definition
in entry table size determination
updating
r name (DEQ macro)

in CRJE PLM
RCALC
in COBOL (E)

36 GY30-2011
24 GY24-5009

RCB
---in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
RCB (Region Control Block)
in TSO CONTROL PROGRAM
36 GY28-7199
format of
initialization of

RCDST - -Read-back check-

373

24 GY28-6382

RDJFCB routine
in FORTRAN IV (G) COMPILER
access method
determination
flowchart

30 GY30-2002

RDRLD
---rn
LINKAGE

RCDST field in E01DATDF
TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774

---rn

RCDTBL table

----rn-COBOL

(F)

RCrlNGT subroutine
in QUEUED TELECOMM. ACCESS METHOD
chart

EDITOR (F)

25 GY28-6638

31 GY28-6667

RDSCAN routine

RCKTBL table
- - r i lCOBOL (F)
RCLASS
-rnCOBOL (E)
RCLOSE macro
in CRJE PLM
RCOPYC subroutine
in QUEUED TELECOMM. ACCESS METHOD
chart
RCOPYT subroutine
in QUEUED TELECOMM. ACCESS METHOD
chart

RD Dictionary Entries
in COBOL (F)
format
Data IC-Text format
ONLINE TEST EXECUTIVE PROGRAM
in glossary

RDCDRT scan routine
in UTILITIES
RDDONE, field in DLCTLR
in TSO COMMAND PROC VOL1-DELETE
RDELETE macro
in CRJE PLM

24 GY28-6382

RDSYN routine
in COBOL (F)

24 GY28-6382

RDTEXT routine
--rJlCOBOL (F)

24 GY28-6382

36 GY30-2011
30 GY30-2002
RDTRK

---rn
30 GY30-2002

GRAPHIC SUBRTN. PACKAGE

25 GY27-7152
24 GY28-6382

37 GY28-6651

25 GY27-7152

RDTXT
in LINKAGE EDITOR (F)

RDATA

---rn

RDSCN routine
in COBOL (F)
24 GY24-5009

RCURS

GRAPHIC SUBRTN. PACKAGE

24 GY28-6382

24 GY28-6382

RC'I'
in LINKAGE EDITOR (F)
31 GY28-6667
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
RCT (Region Control Task)
in TSO CONTROL PROGRAM
36 GY28-7199
determining function to be
performed
general description
level of control
operation of
termination of

---rn

~COBOL (F)

31 GY28-6667

RDTYPE field in IKJPARMD
--rilTSO COMMAND PROC VOL6-PROTECT

36 GY28-6776

RDUCOP routine
- - r i lCOBOL (F)

24 GY28-6382

RDV
in PL/I (F) COMPILER
RDV (Record Dope Vector)
in PL/I SUBROUTINE LIBRARY

29 GY28-6800
29 GY28-6801

RDWRPARM
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
data area
in directory
RDWRPARM (READ/WRITE Parameter List)
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771
format
use
RDxxxx fields in E01DATDF
--rilTSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
RD1XRF
--rnASSEMBLER (F)

21 GY26-3700

32 GY28-6614
36 GY28-6771
36 GY30-2011

RDESD - Phase FI read external symbol
dictionary
in ASSEMBLER (F)
21 GY26-3700
RDFSTK table
--rilCOBOL (F)

24 GY28-6382

RDGETERR, in routine directory
in TSO COMMAND PROCESSOR VOL1-ADD

36 GY28-6771

RDI~~,

field in DICTLR
in TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

RDJFCB macro instruction
-rnTSO COMMAND PROC VOL5-LISTDS
used to get JFCB

36 GY28-6775

Re-enter prevention
in PL/I SUBROUTINE LIBRARY
Re-executable channel program-ATLAS
in UTILITIES
Re-Logon
in TSO CONTROL PROGRAM
Re-Logon Buffer
in TSO CONTROL PROGRAM
Re-Logon Prompter Initialization
routine
in TSO CONTROL PROGRAM
RE record
in COBOL-TQ-PL/l LCP
RE with REDEFINES, processing
in COBOL-TQ-PL/l LCP

29 GY28-6801
32 GY28-6614
36 GY28-7199
36 GY28-7199
36 GY28-7199
29 GY33-7007
29 GY33-7007

REACTIO
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
"Read-back check"-IEBCOPY
in UTILITIES

32 GY28-6614

Read - Read
Read
---rn IBM 1419/1275 DEVICE DEP. BSAM 30 GY21-0012
CHECK module-IGG019V3
EOB module-IGG019V2
READ module-IGG019Vl
33 GY28-6597
in SORT/MERGE
backwards
final merge phase modules
modules
while-write. oscillating technique
in TSO COMMAND PROC VOL4-LISTBC
36 GY28-6774
MAIL directory
NOTICES directory records
user MAIL message
READ
in COBOL (F)
24 GY28-6382
in COBOL-TO-PL/l LCP
29 GY33-7007
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
block of records
card image
DCB
macro
one block
routine
the current member
80 bytes from SYsl.HELP
READ (keyword statement)
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
record I/O statement
Read-ahead QCB
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Read and scan routine
in UPDATE ANALYSIS PROGRAM
36 GY28-7106
Read and write data routine
CIKDRDWRT)
in S/360-1130 DATA TMN. - FORTRAN 25 GY27-7161
Read appendages
in INDEXED SEQUEN. ACCESS METHOD
30 GY28-6618
Read backward command. for 1442, 2501, and
2520 error routines
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
Read BLDL entry, pointer to
in TSO COMMAND PROC VOL1-DELETE
36 GY28-6771
Read block routine
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
error and exceptional conditions
method of operation diagram
Read buffer
in S/360-1130 DATA TMN. - FORTRAN 25 GY27-7161
System/360 PTOP
system/360 user's
1130 PTOP
1130 user's
Read channel operation simulation
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
READ command modification
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
Read continue, use of in
System/360
in S/360-1130 DATA TMN. - FORTRAN 25 GY27-7161
Read control block
in LINKAGE EDITOR (F)
31 GY28-6667
for SYSLIB
for SYSLIN
Read current
in TSO COMMAND PROCESSOR VOL3-EDIT 36 Gy28-6773
definition
Read data routine (GTRED)
in S/360-1130 DATA TMN. - FORTRAN 25 GY27-7161
READ directory" indicator
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771
Read-exclusive list
in SEQUENTIAL ACCESS METHODS
30 GY28-6604
address of in DCB
Read-in logical phase
in PL/I (F) COMPILER
29 GY28-6800

374
introduction
keywords tables
storage blocks
storage map
structure
Read- in phase
in PL/I (F) COMPILER
29
detection of errors
diagnostic message chains
insertion of messages in dictionary
organi zation
output
Read Initial, use of in
System/360
in S/360-1130 DATA TMN. - FORTRAN 25
READ keyword, in syntax table
in FORTRAN IV SYNTAX CHECKER PLM
25
Read last
in TSO COMMAND PROCESSOR VOL3-EDIT 36
definition
READ macro expansion linkage
in TELECOMMUNICATION ACCESS METHOD 30
READ macro instruction
in BASIC TELECOMM. ACCESS ~ETHOD
30
in FORTRAN IV (E)
25
compile-time use of
object-time use of
in JOB MANAGEMENT
36
in SEQUENTIAL ACCESS METHODS
30
with exclusive control option
in'TSO COMMAND PROC VOL5-LISTDS
36
in TSO CONTROL PROGRAM
36
processing for
READ macro instructions
in INDEXED SEQUEN. ACCESS METHOD
30
exception codes set
READ module-IGG019Vl
in IBM 1419/1275 DEVICE DEP. BSAM 30
Read Move routine (IITSBRMV)
in EMULATOR FOR 7090/7094/709411
35
description
flowchart
Read next
in TSO COMMAND PROCESSOR VOL3-EDIT 36
definition
Read only operation
in TCAM SERVICEABILITY AIDS
30
Read operati on
in BASIC TELECOMM. ACCESS METHOD
30
completion
evolution of
execution
logic flow
types
in TSO COMMAND PROCESSOR VOL1-CHNG 36
Read operation routine
in TSO COMMAND PROCESSOR VOL3-EDIT 36
error and exceptional conditions
method of operation diagram
Read queue--scan mode
in INDEXED SEQUEN. ACCESS METHOD
30
format
flow diagrams references
use in processing
READ routine
in COBOL (F)
24
Read routine (IEWLREAD)
in LOADER
31
flowchart of
synopsis of
Read routines
in SEQUENTIAL ACCESS METHODS
30
description of
introduction'to
Read Select routine (IITSELRD)
in EMULATOR FOR 7090/7094/709411
35

GY28-6800

GY27-7161
GY28-6831
GY28-6773
GY30- 2029
GY30- 2001
GY28-6601
GY28-6613
GY28-6604
GY28- 6775
GY28-7199
GY28-6618
GY21-0012
GY27-7187

GY28-6773
GY30-2027
GY30-2001

GY28-6771
GY28-6773

GY28-6618

GY28-6382
GY28-6714

GY28-6604

GY27-7187

375
Read Select routine (IITSELRD)
I in EMULATOR FOR 7090/7094/709411
35 GY27-7187
l--------------------------------------(continued)
description
flowchart
Read skip return routine
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
chart
READ statement
29 GY33-7000
in FORTRAN IV-TO-PL/l LCP
READ statement, direct access
in FORTRAN IV (E)
25 GY28-6601
compile-time processing
of
object-time implementation
of
READ statement, processing
in COBOL-To-PLIl LCP
29 GY33-7007
READ statement, sequential access
in FORTRAN IV (E)
25 GY28-6601
compile-time processing
of
object-time implementation
of
READ subroutine (IKJEFA51)
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771
Read subroutine (IKJEF51)
in TSO COMMAND PROC VOL1-sUBRTNS
36 GY28-6771
asynchronous error exit
routine in
basic operation
callers of
flowchart
inputs to
I/O error messages from
load module residence
outputs
READ success indicator
in TSO COMMAND PROC VOL1-DELETE
36 GY28-6771
Read top
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
definition
Read Translate routine (IITSBRXL)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
READ/wRITE
in FORTRAN IV (H) COMPILER
25 GY28-6642
operator for I/O lists
statement
READ/WRITE macro instructions
in TSO CONTROL PROGRAM
36 GY28-7199
processing for
Read/write modules
in SORT/MERGE
33 GY28-6597
Read/write operation
in S/360-1130 DATA TMN. - FORTRAN 25 GY27-7161
setting status code for
traced for System/360
traced for 1130 system
Read/write parameter block
in TSO COMMAND PROC VOL1-DELETE
36 GY28-6771
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
READ/WRITE Parameter List (RDWRPARM)
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771
format
use
Read/Write routine (IGG019MA)
in BASIC TELECOMM. ACCESS METHOD
30 GY30-2001
area address subroutines
count subroutines
description
functions
logic flow
purpose
READ/WRITE Subroutine (IKJEFA55)
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771
READ/wRITE unit check and unit

Read - READIC

exception ERP module
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
READAREA
in COBOL-TO-PL/l LCP

29 GY33-7007

Readback mode Get routines
in SEQUENTIAL ACCESS METHODS

30 GY28-6604

READBLK, label in code
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
READBUFF, field in RDWRPARM
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
READD
in ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

Reader

~TSO CONTROL PROGRAM

Reader/Interpreter
in CONTROL PROGRAM WITH MFT
flowchart
resident reader
system-assigned transient reader
user-assigned transient reader
in GRAPHIC JOB PROCESSOR SUPPORT
entry list for
passing JCL statements to
in INTRO. TO CONTROL PROGRAM LOGIC
function
operation
in S/360 JOB PROCESSING 1130/2250
entry list (NEL)
passing JCL statements to
in TSO CONTROL PROGRAM
interface with Background
Reader
use in starting TSO
Reader/interpreter data set
in CRJE PLM
Reader/interpreter interface
in CRJE PLM
Reader/interpreter job routine
in JOB MANAGEMENT
Reader/Interpreter Link routine
in TSO CONTROL PROGRAM

36 GY28-7199
36 GY27-7128

36 GY27-7159
36 GY28-6605
36 GY27-7166
36 GY28-7199

36 GY30-2011
36 GY30-2011
36 GY28-6613
36 GY28-7199

READFLGS
in TSO COMMAND PROCESSOR VOLl-LIST 36 GY28-6771
field in RDWRPARM
set by LISTIDS
READFLGS, field in RDWRPARM
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-6771
READFL3, field in RDWRPARM
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
READFL5, field in RDWRPARM
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-6771
READFN routine
COBOL (F)

----rn

24 GY28-6382

READF2 routine

~COBOL (F)

24 GY28-6382

READIC

~COBOL-TO-PL/l LCP

29 GY33-7007

III
-,

376

Reading - RECCW1.2
Reading
in LOADER
load module text
module input
Reading additional DSCBs
in FORTRAN IV (G) COMPILER
direct access volume
searching
Reading catalog information
in TSO COMMAND PROC VOL5-LISTCAT
diagram of
Reading data
in 7074 EMULATE FOR M/165
Reading data from the data set
in IBM 1419/1275 DEVICE DEP. BSAM
Reading data-IEBCOPY
in UTILITIES
Reading DCHB data sets
in TCAM SERVICEABILITY AIDS
Reading routine (IKJEFF05)
in TSO COMMAND PROC VOL6-SUBMIT
description
in use
Reading task
in CONTROL PROGRAM WITH MFT
in MVT JOB MANAGEMENT
Reading the catalog
in CATALOG MANAGEMENT
in TSO CATALOG MANAGEMENT
READMNSW, field in COMMON
in TSO COMMAND PROCESSOR VOLI-ADD

READO subroutine, function of
S/360 JOB PROCESSING 1130/2250

31 GY28-6714

---rn

25 GY28-6638

READ8 routine
in LINKAGE EDITOR (F)
chart
in control statement processing
in program organization

36 GY28-6775
GY27-7228
30 GY21-0012
32 GY28-6614
30 GY30-2027
36 GY28-6776

36 GY27-7128
36 GY28-6660
30 GY28-6606
36 GY28-6745
36 GY28-6771

READPSWD (IGG0199R)
in FORTRAN IV (G) COMPILER
25 GY28-6638
READPSWD routine
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607

36 GY27-7166
31 GY28-6667

REAIOU
---rn-MACHINE-CHECK HANDLER, s360 M65 31 GY27-7155
REAL

~n ALGOL-TO~PL/l LCP

in FORTRAN IV (H) COMPILER
in FORTRAN IV-To-PL/1 LCP
REAL (keyword attribute)
in PL/I SYNTAX CHECKER PLM
attribute classification
check as arithmetic attribute
in ENTRY, PROCEDURE statements
Real constants
in FORTRAN IV (E)
assignment of relative addresses
for
dictionary chain for
in PL/I SYNTAX CHECKER PLM
code assignment
Real data
in GRAPHIC SUBRTN. PACKAGE
Real multiplication skeleton
instructions
in FORTRAN IV (H) COMPILER
REAL parameter in STIMER
in MFT SUPERVISOR
REAL statement
in FORTRAN IV (E)
compile-time processing of

29 GY33-7006
25 GY28-6642
29 GY33-7000
29 GY33- 8009

25 GY28-6601

29 GY33- 8009
25 GY27-7152
25 GY28-6642
36 GY27-7236
25 GY28-66Q1

READR

---rn

ASSEMBLER (F)

READSMB subroutine of IKAPSMBO
in GRAPHIC JOB PROCESSOR SUPPORT
in S/360 ~OB PROCESSING 1130/2250

21 GY26-3700
36 GY27-7159
36 GY27-7166

READX

---rn

ASSEMBLER (F)

READY macro expansion linkage
in TELECOMMUNICATION ACCESS METHOD
functions
READY ,message
in CONTROL PROGRAM WITH MFT
Ready queue
in QUEUED TELECOMM. ACCESS Mh~HOD
example of
in TCAM SERVICEABILITY AIDS
in TELECOMMUNICATION ACCESS METHOD
definition
disabled
enabled
Ready routine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
Ready-to-read status
in S/360-1130 DATA TMN. - FORTRAN
establishing for the system
establishing for the user
Readying data sets
in LOADER

21 GY26-3700

30 GY30-2029
36 GY27-7128
30 GY30-2002
30 GY30-2027
30 GY30-2029

30 GY30-2029

25 GY27-7161

31 GY28-6714

REASSIGN MEMORY
in FORTRAN IV (G) COMPILER

25 GY28-663a

REB
in GRAPHICS ACCESS METHOD

30 GY27-7113

Recall Controller (SGRCL)
---rn-S/360 JOB PROCESSING 1130/2250
charts
description of
Recall Processor (IKAPRECO)
in GRAPHIC JOB PROCESSOR SUPPORT
ACCEPT option
chart
description of
example of use in defining a job
INSERT option
OMIT option
REVIEW option
Recall Processor (IKDPRECO)
in S/360 JOB PROCESSING 1130/2250
ACCEPT option
charts
description of
functions performed by
INSERT option
OMIT option
REVIEW option
Recall QCB
in TELECOMMUNICATION ACCESS METHOD

30 GY30-2029

RECAT function
in CATALOG MANAGEMENT
in TSO CATALOG MANAGEMENT

30 GY28-6606
36 GY28-6745

36 GY27-7166

36 GY27-7159

36 GY27-7166

RECCW1,2
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155

Receive - Record

377
Receive Continue, use of in
1130
in s/360-1130 DATA TMN. - FORTRAN
Receive Initial, use of in
1130
in s/360-1130 DATA TMN. - FORTRAN
Receive mode
in TCAM SERVICEABILITY AIDS
Receive Repeat, use of in 1130
in S/360-1130 DATA TMN. - FORTRAN
Receive scheduler routine
in QUillED TELl.COMM. ACCESS METHOD
chart
Receive scheduling subtask
in QUEUED Tl.LECOMM. ACCESS Ml.THOD

25 GY27-7161

qualified key-name (FQ)
qualified name (RQ)
RB

25 GY27-7161

RQ
RV

RE

SO

30 GY30-2027
25 GY27-7161
30 GY30-2002
30 GY30-2002

Receiving control
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
Receiving data
in S/360-1130 DATA TMN. - FORTRAN 25 GY27-7161
general information about
in System/360
in 1130 system
Receiving operational flow
in QUEllED TELECOMM. ACCESS METHOD 30 GY30-2002
RECFM, in list source descriptor
in TSO COMMAND PROC VOL6-WHEN/END
RECFM field
in EMULATOR FOR 7090/7094/709411

36 GY28-6776
35 GY27-7187

RECHASG
in MACHINE-CHECK HANDLER, s360 M65 31 GY27-7155
RECHASSG
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
RECHSTAT
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
RECIDENTIF
in COBOL-TO-PL/l LCP

29 GY33-7007

RECIO
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

RECLEN, field in INSRCDES
---rn-TSO COMMAND PROCESSOR VOL6-RUN

36 GY28-6776

Reconfiguration, device, dynamic
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
Reconfiguration, logical and physical
in MVT JOB MANAGEMENT
36 GY28-6660
Reconstructing a new data set-IEBISAM
in UTILITIES
32 GY28-6614
Record
---rn-COBOL-To-PL/l LCP
AD
assignment address pointer (AD)
CM

CN
comment (CM)
condition-name (CN)
control block (RB)
entry (RE)
file (FR)
FQ
FR
identification (PH)
LC
limit-count (LC)
OV
overflow-name (OV)
PH

29 GY33-7007

SN
sort (SD)
special-name (SN)
value clause (RV)
in LINKAGE EDITOR (F)
dense (contiguous)
formats
loose (noncontiguous)
types
in SORT/MERGE
area in bin
count during block/deblock
counter
movement techniques
storage area
in TSO COMMAND PROC VOL4-LISTBC
dummy
first record
in data set
in SYSl. BRODCAST
next
directory
MAIL directory
number of
in TSO COMMAND PROCESSOR VOL3-EDIT
definition
subcommand processors' use of
in TSO COMMAND PROCESSOR VOL4-EXEC
first
format
length
in TSO COMMAND PROCESSOR VOL4-HELP
average length
block, bytes read
size, SYS1.HELP data set
RECORD
in ALGOL-TO-PL/l LCP
RECORD (keyword attribute)
in PL/I SYNTAX CHECKER PLM
attribute classification
in OPEN statement
Record (oriented I/O statements)
in PL/I SYNTAX CHECKER PLM
checking of
FLAGS DSECT for
options for
option conflict masks (FLAGS)
subroutine RECIO (IKM22)
Record blocking
in PL/I SUBROUTINE LIBRARY
Record buffer build area
in MACHINE-CHECK HANDLER, M135/145
Record compression/decompression
routines
in MVT JOB MANAGEMENT
ASB routine use of
interpreter routine use of
Record compression technique
in MVT JOB MANAGEMENT
Record Control Field, Standard
in COBOL (E)
Record deblocking
in PL/I SUBROUTINE LIBRARY
Record delete routine
in TSO COMMAND PROCESSOR VOL3-EDIT
error and exceptional conditions
method of operation diagram
Record description, processing
in COBOL-TO-PL/l LCP

31 GY28-6667

33 GY28-6597

36 GY28-6774

36 GY28-6773
36 GY28-6774

36 GY28-6774

29 GY33-7006
29 GY33-8009

29 GY33-8009

29 GY28-6801
30 GY27-7237
36 GY28-6660

36 GY28-6660
24 GY24-5009
29 GY28-6801
36 GY28-6773

29 GY33-7007

Record - Records
Record Description entries
in COBOL (F)
24 GY28-6382
Record description entry. processing
in COBOL-TO-PLll LCP
29 GY33-7007
Record descriptor table (RDT)-IEBGENER
in UTILITIES
32 GY28-6614
Record descriptor word (RDW)
in SEQUENTIAL ACCESS METHODS
30 GY28-6604
Record Dope Vector (RDV)
in PL/I (F) COMPILER
29 GY28-6800
CONTROLLED or BASED variables and
aggregates
dictionary entry
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Record entry area
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
Record Entry Build Area (MCH)
in MACHINE-CHECK HANDLER. S360 M65 31 GY27-7155
Record Entry Build Area of the MCH
Common Area
in MACHINE-CHECK HANDLER. M135/145 30 GY27-7237
Record entry format
in MFT SUPERVISOR
36 GY27-7236
RECORD FIELD
in COBOL-To-PL/1 LCP
29 GY33-7007
Record format. Internal 1 Text
in COBOL-TO-PL/l LCP
29 GY33-7007
Record format. Internal 2 Text
in COBOL-TO-PL/l LCP
29 GY33-7007
Record format-IEBCOMPR
in UTILITIES
32 GY28-6614
Record format vs processing-IEBPTPCH
in UTILITIES
32 GY28-6614
Record formats
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
defaults
fixed
spanned variable-length
7094
in UTILITIES
32 GY28-6614
catalog
how to find
of DASDDR dumped data
recovery output tape
SYS1.LOGREC
SYSUT1
SYSUT2
SYSUT3
track zero
Record formats (Phase F2)
in ASSEMBLER (F)
21 GY26-3700
end of data set
error record
logical statement
reproduction record
source record
Record formats (Phase F3)
in ASSEMBLER (F)
21 GY26-3700
Record formats (Phase F7)
in ASSEMBLER (F)
21 GY26-3700
cross-reference records
edited text records (appended fixed
field) format
edited text records (fixed field) format
edited text records (variable field)
format
error records
work bucket (literal in operand)
work bucket (symbol in operand)
work bucket (DC. literal DC. and DS
operation code
work bucket (special)
LTORG statement work bucket
Record formats (Phase F8)
in ASSEMBLER (F)
21 GY26-3700
Record identification-IEBPTPCH

378
in UTILITIES
32
Record input/output
in PL/I SUBROUTINE LIBRARY
29
addition of access modules
control blocks
data management access methods
general flow
interface modules
logic
modular linkage
sta tement type
statement verification
transmitters
RECORD KEYS
in COBOL (F)
24
Record length
in ALGOL-TQ-PL/1 LCP
29
in TSO COMMAND PROC VOL2-DELETE
36
Record length, in list source descriptor
in TSO COMMAND PROC VOL6-WHEN/END 36
Record length (RL)
in PL/I SYNTAX CHECKER PLM
29
Record locate" routine
in TSO COMMAND PROCESSOR VOL3-EDIT 36
error and exceptional conditions
method of operation diagram
Record movement
in MVT JOB MANAGEMENT
36
track stack and queue data set
Record overflOW-ATLAS
in UTILITIES
32
RECORD parameter fOr MODE
command
in MACHINE-CHECK HANDLER. M155/165 30
Record prefix
in TCAM SERVICEABILITY AIDS
30
Record Processing
in COBOL (E)
24
in COBOL-TO-PL/1 LCP
29
FR
RQ
SD
RECORD statement
in SORT/MERGE
33
Record type tables
in COBOL-TO-PL/1 LCP
29
Record types. in SYS1. BRODCAST
in TSO COMMAND PROC VOL1-BROADCAST 36
Record variable description
in PL/I SUBROUTINE LIBRARY
29
Recorded key
in ALGOL-TQ-PLll LCP
29
Recording
in MACHINE-CHECK HANDLER. M135/145 30
channel-check records
emergency
error records
mode
in MACHINE-CHECK HANDLER. M155/165 30
emergency
of error records
of channel inboard record
Recording and termination
in MACHINE-CHECK HANDLER. M135/145 30
Recording function
in MACHINE-CHECK HANDLER. M135/145 30
Rec ordi ng mode
in MACHINE-CHECK HANDLER. M135/145 30
in MACHINE-CHECK HANDLER. M155/165 30
36
in MVT JOB MANAGEMENT
Records
30
in CATALOG MANAGEMENT
in SORT/MERGE
33
fixed-length
flagged
movement of

GY28-6614
GY28-6801

GY28-6382
GY33-7006
GY28-6772
GY28-6776
GY33-8009
GY28-6773

GY28-6660
GY28-6614
GY27-7198
GY30-2027
GY24-5009
GY33-7007

GY28-6597
GY33-7007
GY28-6771
GY28-6801
GY33-7006
GY27-7237

GY27-7198

GY27-7237
GY27-7237
GY27-7237
GY27-7198
GY28-6660
GY28-6606
GY28-6597

379
Records
I in SORT/MERGE
33 GY28-6597
L--------------------------------------{continued)
number of
spanned
variable-length
variable-length spanned
VRE
36 GY28-6745
in TSO CATALOG MANAGEMENT
in UTILITIES
32 GY28-6614
comparing
copying and modifying
Recoverable failure
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
Recovering and replacing a track
in UTILITIES

32 GY28-6614

Recovery
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
four levels of
general methods of
special methods for
High Speed Buffer
High Speed
Multiply
strategy
Recovery capability (MCH)
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
theory
Recovery Extent List
in TSO CONTROL PROGRAM
36 GY28~7199
Recovery Extent List Queue Element
in TSO CONTROL PROGRAM
36 GY28-7199
Recovery management
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
in MVT SUPERVISOR
36 GY28-6659
Recovery management routine and refreshable
attribute)
in LINKAGE EDITOR (F)
31 GY28-6667
Recovery Management Support
in TSO CONTROL PROGRAM
36 GY28-7199
Recovery management support (RMS)
36 GY28-6660
in MVT JOB MANAGEMENT
for Model 85
for Model 155
Recovery Management Support (RMS)
for Model
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
function of
need for
Recovery management support communications
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
in data area directory
in data area layout
Recovery Management support
modifications
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
Recovery options for machine checks and
channel errors
in MVT SUPERVISOR
36 GY28-6659
Recovery procedure~ I/O error
in FORTRAN IV (E)
25 GY28-6601
compile-time
object-time
Recovery routines, IBM-supplied error
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
RECP (pointer to next record in buffer)
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
RECPULOG
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
RECSW

Records - Redirect
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
RECTABFW
in CRJE PLM

36 GY30-2011

RECTLIND
in MACHINE-CHECK HANDLER, s360 M65 31 GY27-7155
RECTYPFW
in CRJE PLM

36 GY30-2011

RECUA

---rn MACHINE-CHECK HANDLER,

S360 M65 31 GY27-7155

Recurring error
in MACHINE-CHECK HANDLER, k135/145 30 GY27-7237
Recursion
in FORTRAN IV (G) COMPILER
definition
in compiler
in MFT SUPERVISOR
ABEND
CLOSE

25 GY28-6638
36 GY27-7236

DAR

invalid
message
OPEN
Recursion, ABEND
in MVT SUPERVISOR
invalid
valid
Recursion subroutine
in PL/I SUBROUTINE LIBRARY

36 GY28-6659

29 GY28-6801

RECURSIVE (key\llOrd attribute)
in PL/I SYNTAX CHECKER PLM
attribute classification
in PROCEDURE statement
Recursive block
in PL/I SUBROUTINE LIBRARY
Recursive calls
in TSO COMMAND PROC VOL6-SUBMIT

36 GY 28- 6776

RECVALUE
in COBOL-TO-PL/l LCP

29 GY33-7007

29 GY33-8009

29 GY28-6801

REDATE

~MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155

REDEF routine

----"Iii COBOL (F)
Redefines
in COBOL (E)
REDEFINES bit
in COBOL (F)
REDEFINES clause
in COBOL (F)

24 GY28-6382
24 GY24-5009
24 GY28-6382
24 GY28-6382

Redefining data to TOTE
in TCAM SERVICEABILITY AIDS

30 GY30-2027

Redefinition of integer variables
in FORTRAN IV (E)
in subscript expressions

25 GY28-6601

REDEFLEV
in COBOL-TO-PL/l LCP

29 GY33-7007

Redirect a message routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
crosa reference table
flowchart
library
microfiche directory

D

380

Redirect - Region

Redirect a message routine
I in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
L--------------------------------------(continued)
module description
register usage
REDIRECT macro expansion linkage
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
REDIRECT parameter list
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
REDUCE-IEKQSR
in FORTRAN IV (H) COMPILER
REDUCIBLE
1n PLII (F) COMPILER
REDUCIBLE (keyword attribute)
in PLII SYNTAX CHECKER PLM
attribute classification
in GENERIC attribute list
in PROCEDURE statement
Redundancy
in EMULATOR FOR 7090/709417094I1
checking
data channel traps
setting
write end-of-file operations

REFORM!'
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
25 GY28-6642
29 GY28-6800

Reentrant
in TELECOMMUNICATION ACCESS METHOD
REENTRANT (keyword attribute)
in PLII SYNTAX CHECKER PLM
in OPTIONS attribute list
Reentrant area pointer
in TSO COMMAND PROC VOL I-DELETE
Reentrant code
in TSO COMMAND PROCESSOR VOL4-HELP
Reentrant data base pointer
in TSO COMMAND PROC VOLI-DELETE

35 GY27-7187

31 GY28-6667
25 GY27-7152
30 GY28-6606
36 GY28-6745
30 GY30-2029
29 GY33-8009
36 GY28-6771
36 GY28-6774
36 GY28-6771

REENVCHK
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
REERPIB
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
REFER (keyword option)
in PL/I SYNTAX CHECKER PLM
bound in Demension attr ibute
checking of (IKM23)
in expression
REFERFL (REFER found flag)
string attribute expression
Refer-back dictionary
in JOB MANAGEMENT
Refer-back dictionary (Fig)
in MVT JOB MANAGEMENT
Refer-back processing
in MVT JOB MANAGEMENT
Reference manual
in PLII SYNTAX CHECKER PLM
Reference publications
in TSO COMMAND PROCESSOR VOL4-HELP
Reference table
in TESTRAN

REFR
----in LINKAGE EDITOR (F)
31 GY28-6667
REFR (refreshable)
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155

29 GY33-8009

Redundant paths
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-6771
Reenterable attribute (RENT)
in LINKAGE EDITOR (F)
Reenterable coding
in GRAPHIC SUBRTN. PACKAGE
Reenterable routines
in CATALOG MANAGEMENT
in TSO CATALOG MANAGEMENT

Referenced statement numbers
in FORTRAN IV (E)
25 GY28-6601
branch list table for
References, external
in FORTRAN IV (E)
25 GY28-6601
generation of ESD card images for
REFERFL in COMFLAG2
in PL/I SYNTAX CHECKER PLM
29 GY33-8009

Refresh as a method of recovery
in MACHINE-CHECK HANDLER, M135/145
Refresh Clear Channel module
(IGFASRlA)
in MACHINE-CHECK HANDLER, S360 M65
Refresh flags
in MACHINE-CHECK HANDLER, S360 M65
Refresh Loader module
in MACHINE-CHECK HANDLER, M135/145
Refresh Loader module (IGFASR10)
in MACHINE-CHECK HANDLER, S360 M65
Refresh loading
in MACHINE-CHECK HANDLER, S360 M65
theory
Refresh-Repair Verification
module
in MACHINE-CHECK HANDLER, M135/145
Refresh/Repair Verifier for the
Model 155
in MACHINE-CHECK HANDLER, M155/165
Refresh/Repair Verifier for the
Model 165
in MACHINE-CHECK HANDLER, M155/165
Refreshable
in MACHINE-CHECK HANDLER, S360 M65
code (definition)
failure
in TELECOMMUNICATION ACCESS METHOD
Refreshable attribute
in MACHINE-CHECK HANDLER, M135/145
Refreshable attribute (REFR)
in LINKAGE EDITOR (F)
Refreshable code
in MACHINE-CHECK HANDLER, M135/145
Refreshing a transient area block
in MVT SUPERVISOR
Refreshing code
in MACHINE-CHECK HANDLER, M155/165

30 GY27-7237
31 GY27-7155
31 GY27-7155
30 GY27-7237
31 GY27-7155
31 GY27-7155

30 GY27-7237
30 GY27-7198
30 GY27-7198
31 GY27-7155
30 GY30-2029
30 GY27-7237
31 GY28-6667
30 GY27-7237
36 GY28-6659
30 GY27-7198

REG roll
---in FORTRAN IV (G) COMPILER

25 GY28-6638

REGAS-IEKRRG
~ FORTRAN IV (H) COMPILER

25 GY28-6642

REGD
---rn CRJE PLM

36 GY30-2011

29 GY33-8009

36 GY28-6613
36 GY28-6660
36 GY28-6660
29 GY33-8009
36 GY28-6774
37 GY28-6611

Region
in CATALOG MANAGEMENT
in MVT JOB MANAGEMENT
address in the SCT
cOIllllland processing
direct access volume
initialization
interpreter
job step/initiator
queue initializing
in TSO CATALOG MANAGEMENT

30 GY28-6606
36 GY28- 6660

36 GY28-6745

381
Region
L--------------------------------------(continued)
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
in 'I'SO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771
protection key
size
register usage
releasing PDE storage
requirements
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
Region. terminal user's
in 'I'SO COMMAND PROC VOL4-LISTBC
36 GY28-6774
environment
protection key
Region. user
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
Region. user's
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
REGION boundaries
in PL/I (F) COMPILER
29 GY28-6800
Region Control Block
in TSO CONTROL PROGRAM
36 GY28-7199
Region Control Task
in TSO CONTROL PROGRAM
36 GY28-7199
Region control task (RCT)
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
definition
relationship of EDIT to
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
Region number
in TSO COMMAND PROC VOL5-0PERA'I'OR 36 GY28-6775
Region of main storage
in MVT SUPERVISOR
36 GY28-6659
allocation of
freeing of
REGION parameter in GJOBCTL macro
instruction
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
in s/360 JOB PROCESSING 1130/2250 36 GY27-7166
Region protection key
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
Region Queue Element
in TSO CONTROL PROGRAM
36 GY28-7199
Region size. field in DROBD
in TSO COMMAND PROC VOL1-DELETE
36 GY28-6771
Region size. PDE for maximum
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
Region size. specifying the
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
Region size specified
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771
Region switch
in TSO CONTROL PROGRAM
36 GY28-7199
processing of
saving control blocks during
Region 1
in UPDATE ANALYSIS PROGRAM
36 GY28-7106
Region 2
in UPDATE ANALYSIS PROGRAM
36 GY28-7106
REGIONAL (ENVIRONMENT option)
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
REGIONAL 'source keys'
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
format B
format A
organization
Regional data sets
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
initialization
open process
REG,IONAL (1)
in ALGOL-TO-PL/1 LCP
29 GY33-7006
IREGIONAL (3)

Region - Register
in ALGOL-TO-PL/1 LCP
Register
in FORTRAN IV (H) COMPILER
array
assignment
basic OPT=O
full OPT=l
full OPT=2
phase 20
tables
usage
table
in INITIAL PROGRAM LOADER AND NIP
clearing general
clearing floating point
contents at IPL termination
in MACHINE-CHECK HANDLER. M135/145
control
conventions
hardware mode control
in SORT/MERGE
save area
usage
in TSO COMMAND PROC VOL2-ALLOCATE
summary
upon entry
in TSO COMMAND PROC VOL4-LISTBC
base for DCB
on entry and exit
to IKJEES70
to IKJEES75
summary
in TSO COMMAND PROCESSOR VOL2-CALL
on entry and exit
summary
in TSO COMMAND PROCESSOR VOL4-EXEC
save area
summary
Register. control
in MACHINE-CHECK HANDLER. M155/165
Register. field in STAEWA
in TSO COMMAND PROC VOL5-0PERATOR
Register allocation logical phase
in PL/I (F) COMPILER
Register Assignment
in COBOL (F)
Register Assignments
in COBOL (E)
Register contents
in FORTRAN IV SYNTAX CHECKER PLM
at entry to CSECTS
during syntax checker processing
in S/360-1130 DATA TMN. - FORTRAN
in TSO COMMAND PROC VOL6-PROTECT
diagnostic aid
IKJEHPRO
Register contents at entry to
routines
in LOADER
Register conventions
in GRAPHIC JOB PROCESSOR SUPPORT
in MACHINE-CHECK HANDLER. M135/145
in S/360 JOB PROCESSING 1130/2250
REGISTER IBCOM routine
in FORTRAN IV (G) COMPILER
Register RA (initialization routine)
in PL/I SUBROU'l'INE LIBRARY
Register save area
in ALGOL (F) COMPILER
Register selection mask
in TESTRAN
Register Specification
in COBOL (F)
Procedure A-Text format
Register summary

29 GY33-7006
25 GY28-6642

36 GY28-6661

30 GY27-7237

33 GY28-6597
36 GY28-6772
36 GY28-6774

36 GY28-6772
36 GY28-6774

30 GY27-7198
36 GY28-6775
29 GY28-6800
24 GY28-6382
24 GY24-5009
25 GY28-6831
25 GY27-7161
36 GY28-6776

31 GY28-6714
36 GY27-7159
30 GY27-7237
36 GY27-7166
25 GY28-6638
29 GY28-6801
26 GY33-8000
37 GY28-6611
24 GY28-6382

Ii]

Reqister - RELABEL

Register sununary
L--------------------------------------(continued)
in TSO COMAND PROC VOL2-CNCL/STATus36 GY28-6772
in TSO COMMAND PROC VOLI-DELE~E
36 GY28-6771
in TSO COMMAND PROC VOL1-sUBRTNS
36 GY28-6771
in TSO COMMAND PROC VOL2-DELE~E
36 GY28-6772
in TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6775
in TSO COMMAND PROC VOL5-0UTPUT
36 GY28-6775
in TSO COMMAND PROC VOL6-PROTECT
36 GY28-6776
in TSO COMMAND PROC VOL6-SUBMIT
36 GY28-6776
in TSO COMMAND PROC VOL6-TERMINAL 36 GY28-6776
in TSO COMMAND PROCESSOR VOLI-ADD 36 GY28-6771
in TSO CO~lliffiND PROCESSOR VOLI-CHNG 36 GY28-6771
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
in TSO COP~AND PROCESSOR VOL6-RUN 36 GY28-6776
in TSO COM~AND PROCESSOR VOL6-SEND 36 GY28-6776
Register summary, ACCOUNT command control
module
in TSO COMMAND PROCESSOR VOLI-ACCT 36 GY28-6771
Register usage
in FORTRAN IV (G) COMPILER
25 GY28-6638
by compiler
by object module
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
channel availability test
used in error recovery (diagram)
used with logical channel (diagram)
message to operator
with MVT (diagram)
used with RQE
start I/O operations
diagram
direct access
tape units (diagram)
table of register usage
used for UCB (diagram)
used to write operator messages
in TCAM SERVICEABILITY AIDS
30 GY30-2027
in TSO COMMAND PROC VOL4-LISTALC
36 GY28-6774
in TSO COMMAND PROC VOL5-LISTCAT
36 GY28-6775
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
in TSO COMMAND PROC VOL6-PROFILE
36 GY28-6776
in TSO COMMAND PROC VOL6-RENAME
36 GY28-6776
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
in TSO TMP & SERVICE ROUTINES
36 GY28-6770
Catalog Information Routine
Command Scan service routine
Default service routine
Dynamic Allocation Interface routine
GETLINE service routine
Parse service routine
PUTGET service routine
PUTLINE service routine
STACK service routine
Terminal Monitor Program
GY27-7228
in 7074 EMULATE FOR M/165
Register usage, service aids
in TCAM SERVICEABILITY AIDS
30 GY30-2027
Register usage (chart)
in CATALOG MANAGEMENT
30 GY28-6606
in TSO CATALOG MANAGEMENT
36 GY28-6745
Register usage and contents
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
Register usage by
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
IKJEHCIR
IKJEHDEF
IKJEHDEL
in TSO COMMAND PROC VOL6-WHEN/END 36 GY28-6776
IKJEFEll
IKJEFE15
Register usage by module table
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Register usage by routine

382
in TSO COMAND PROC VOL2-CNCL/STATU~36
Register usage in IKJEFROO
in TSO COMMAND PROCESSOR VOL6-RUN 36
Register usage sununary
in TSO COMMAND PROC VOLI-BROADCAST 36
Register usages
in TSO COM¥illND PROCESSOR VOL6-SEND 36
Registers
in FORTRAN IV (E)
25
assignment of
base
in FORTRAN IV (H) COMPILER
25
reserved
saving at main program entry
saving at subprogram program entry
in PL/I (F) COMPILER
29
arithmetic
assigned
base
'freeing'
parameter
physical
saving
symbolic
symbolic accumulator
Registers, contents of
in LINKAGE EDITOR (F)
31
Registers (compile time)
in ALGOL (F) COMPILER
26
register use in Compilation Phase
Registers (object time)
in ALGOL (F) COMPILER
26
register use
register control
Registers during execution
in TSO COMMAND PROC VOL5-0UTPUT
36
Registers used by IKJEFT80
in TSO COMMAND PROC VOL6-TERMINAL 36

GY28-6772
GY28-6776
GY28-6771
GY28-6776
GY28-6601
GY28-6642

GY28-6800

GY28-6667
GY33-8000
GY33-8000

GY28-6775
GY28-6776

REGPARFP
in MACHINE-CHECK HANDLER, s360 M65 31 GY27-7155
REGPARGP
in MACHINE-CHECK HANDLER, s360 M65 31 GY27-7155
REGSAV field in EOIDATDF
---rn-TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
REGSFPR
in MACHINE-CHFCK HANDLER, S360 M65 31 GY27-7155
REGSGPR
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
REI
in ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

REIENTR Y swi tch
in ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

Reinitialization of GJP
in GRAPHIC JOB PROCESSOR SUPPORT
Reinitialization of SGJP after
execution of a foreground job
in S/360 JOB PROCESSING 1130/2250
in System/360
in 1130

36 GY27-7159
36 GY27-7166

REIOLOG
in MACHINE-CHECK HANDLER, s360 M65 31 GY27-7155
REKEY

---rn

MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155

RELABEL
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155

383
RELADD
in COBOL

(F)

RELAT
in ASSEMBLER (F)
Related entries
in TSO COMMAND PROCESSOR VOLI-CHNG
Related publications
in TSO COMMAND PROC VOLI-BROADCAST
in TSO COMMAND PROC VOLI-SUBRTNS
in TSO COMMAND PROC VOL2-DELETE
in TSO COMMAND PROC VOL5-LISTDS
in TSO COMMAND PROC VOL6-PROFILE
in TSO COMMAND PROC VOL6-PROTECT
in TSO COMMAND PROCESSOR VOLI-ADD
in TSO COMMAND PROCESSOR VOLl-LIST
in TSO COMMAND PROCESSOR VOL2-CALL
in TSO COMMAND PROCESSOR VOL4-FREE
in TSO COMMAND PROCESSOR VOL6-RUN
in TSO COMMAND PROCESSOR VOL6-SEND

24 GY28-6382
21 GY26-3700
36 GY28-6771
36
36
36
36
36
36
36
36
36
36
36
36

Relation
in ALGOL (F) COMPILER
26
Relational operation, filler for
in TSO COMMAND PROC VOL6-WHEN/END 36
Relational operators
in ALGOL (F) COMPILER
26
in FORTRAN IV (H) COMPILER
25
in PL/I SYNTAX CHECKER PLM
29
< ; LT
< =; LE
<; NL
>; NG
=; NE
> ; GT
> =; GE
Relationals
in COBOL (F)
24
Procedure IC-Text format
Relationals for Condition Names
in COBOL (F)
24
Procedure IC-Text format
Relationship of
in GRAPHIC SUBRTN. PACKAGE
25
control blocks
GSP routines
Relationship of GJX/GJP to the operating
system
in GRAPHIC JOB PROCESSOR SUPPORT
36
Relationships of modules
in TSO COMMAND PROCESSOR VOL4-EXEC 36
Relative address assignment
in FORTRAN IV (H) COMPILER
Relative Addresses
in COBOL (F)
definition
Procedure A-Text format
in FORTRAN IV (E)
assignment of
Relative addressing
in FORTRAN IV (G) COMPILER
Relative block address (RBA)
in TSO COMMAND PROCESSOR VOL6-SEND
in IEEVSDIO
in operation
Relative block conversion
in SEQUENTIAL ACCESS METHODS
Relative generation number
in CATALOG MANAGEMENT
in calculating absolute
validity of
in TSO CATALOG MANAGEMENT
in calculating absolute
validity of

GY28-6771
GY2S-6771
GY28-6772
GY2S-6775
GY28-6776
GY28-6776
GY28-6771
GY28-6771
GY28-6772
GY28-6774
GY28-6776
GY28-6776
GY33-8000
GY28-6776
GY33-8000
GY28-6642
GY33-8009

GY28-6382
GY2S-6382
GY27-7152

GY27-7159
GY2S-6774

25 GY2S-6642
24 GY28-6382
25 GY2S-6601
25 GY2S-6638
36 GY28-6776

30 GY28-6604
30 GY2S-6606
36 GY2S-6745

RELADD - Release
Relative line number (rln)
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Relative line numbers
in BASIC TELECOMM. ACCESS METHOD
30 GY30- 2001
in PL/I SYNTAX CHECKER PLM
29 GY33- S009
Relative priorities in TeAM
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Relative Priority routine
in MVT SUPERVISOR
36 GY28-6659
Relative record position, format A
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Relative record position, format B
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Relative relocation
in LINKAGE EDITOR (F)
31 GY28-6667
defini tion
examples
in entry processing
marking RLD item for
Relative relocation constant
in LOADER
31 GY28-6714
definition of
use of
Relative relocation factor
in LINKAGE EDITOR (F)
31 GY28-6667
definition
determination of
general description of use
use in determining buffer relocation
constant
Relative track address
in TSO COMMAND PROCESSOR VOLI-ADD 36 GY28-6771
Relative track address (RTA)
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
entry in Extent table
Relative track conversion
in SEQUENTIAL ACCESS METHODS
30 GY28-6604
RELBUF macro instruction
---rn-BASIC TELECOMM. ACCESS METHOD

30 GY30-2001

RELCOR-IEKRRL
in FORTRAN IV (H) COMPILER

25 GY2S-6642

Release
in PL/I (F) COMPILER
of dictionary blocks
of main storage
of scratch storage
of text blocks
RELEASE command
in CONTROL PROGRAM WITH MFT
in INPUT/OUTPUT SUPERVISOR
in MVT JOB MANAGEMENT
execution of
use of
Release data-area (TERMINAT)
in PL/I SYNTAX CHECKER PLM
Release extra storage (CHECK1)
in PL/I SYNTAX CHECKER PLM
Release intercepted message routine
in QUEUED TELECOMM. ACCESS METHbD
chart
Release job queue routine
in JOB MANAGEMENT
Release Loaded Programs routine
in MVT SUPERVISOR
description of
entry point name of
flowchart of
module name for
synopsis of
RELEASE macro
in CRJE PLM
Release Main Storage routine
in MVT SUPERVISOR

29 GY28-6800

36 GY27-712S
30 GY2S-6616
36 GY2S-6660

29 GY33-S009
29 GY33-S009
30 GY30-2002
36 GY2S-6613
36 GY2S-6659

36 GY30-2011
36 GY28-6659

IiJ

384

Re1ease - RBLSE
Release Main Storage routine
I in MVT SUPERVISOR
36 GY28-6659
L--------------------------------------(continued)
description of
entry point name of
flowchart of
module name for
synopsis of
Release must-complete option
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
RELEASE Q command
in MVT JOB MANAGEMENT
36 GY28-6660
Release routine
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
RELEASE statement
in COBOL (F)
24 GY28-6382
Release storage
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
RELEASE subroutine
in GRAPHICS ACCESS METHOD
30 GY27-7113
RELEASEM macro expansion linkage
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Releasing buffer space
in EMULATOR FOR 7090/7094/7094I1
Releasing main storage
in MVT SUPERVISOR
at end of task
during abnormal termination
in response to a FREEMAIN macro
instruction
Releasing rolls
in FORTRAN IV (G) COMPILER
definition
in Allocate
in Invocation
Releasing storage
in TSO COMMAND PROCESSOR VOL4-HELP
RELEX
in
RELEX
in

macro instruction
SEQUENTIAL ACCESS METHODS
module
SEQUENTIAL ACCESS METHODS

35 GY27-7187
36 GY28-6659

25 GY28-6638

36 GY28-6774
30 GY28-6604
30 GY28-6604

RELINT
in ASSEMBLER (F)

21 GY26-3700

RELLOC field
in COBOL (F)

24 GY28-6382

RELNT

---rn

COBOL-TO-PL/1 LCP

29 GY33-7007

RELOCATE routine
in LINRAGE EDITOR (F)

31 GY28-6667

Relocating address constants
in LOADER

31 GY28-6714

Relocation
in FORTRAN IV (H) COMPILER
dictionary
factor
of text entries for structural
determination
in INITIAL PROGRAM LOADER AND NIP
dictionary record format
factots
factor table (RLFTABLE)
IPL
NIP
in LINRAGE EDITOR (F)
factor
of address constants
of RLD items during intermediate
processor

25 GY28-6642

Relocation constant
in LINRAGE EDITOR (F)
31 GY28-6667
in LOADER
31 GY28-6714
computing
Relocation constant table (RCT)
in LINRAGE EDITOR (F)
31 GY28-6667
contents
format
making an entry in
Relocation Dictionary
in COBOL (F)
24 GY28-6382
in FORTRAN IV (E)
25 GY28-6601
Relocation dictionary (RLD)
in LINKAGE EDITOR (F)
31 GY28-6667
contents
introduction to
processing (RLD001)
description of
charts
synopsis
operation diagram
record
and text processor 
Retry on
in MACHINE-CHECK HANDLER, M135/145
Retry queue
in TELECOMMUNICATION ACCESS METHOD
Retry routine
in TSO COMMAND PROCESSOR VOL3-EDIT
abnormal end exit use of
definition
Retry routine (cleanup routine>
in TSO COMMAND PROCESSOR VOL7-TEST
Retry threshold
in MACHINE-CHECK HANDLER, S360 M65
Retryable instruction
in MACHINE-CHECK HANDLER, S360 M65

24 GY24-5009
30 GY27-7237

30 GY27-7198
36 GY27-7166
36 GY28-6777

30 GY27-7237
30 GY3Q- 2029
36 GY28-6773

36 GY28-6777
31 GY27-7155
31 GY27-7155

RETURN
---rilALGOL-TO-PL/1 LCP

29 GY33-7006

391
RETURN

L--------------------------------------(continued)

in MFT SUPERVISOR
36
RETURN (keyword statement)
in PL/I SYNTAX CHECKER PLM
29
checking of
subroutine ISRETURN (IKM22)
Return Address stack
in ALGOL (F) COMPILER
26
Return buffer queue
in QUEUED TELECOMM. ACCESS METHOD 30
Return buffer routine
in QUEUED TELECOMM. ACCESS METHOD 30
chart
Return buffer subtask
in QUEUED TELECOMM. ACCESS METHOD 30
Return code
in TCAM SERVICEABILITY AIDS
30
in TSO COMMAND PROC VOL1-DELETE
36
ABEND
register
in TSO COMMAND PROC VOL2-ALLOCATE 36
catalog routine
dynamic allocation
from DAIR
to TMP
in TSO COMMAND PROC VOL2-DELETE
36
in routine descriptions
from DAIR
in TSO COMMAND PROC VOL4-LISTBC
36
from catalog routine
from dynamic allocation
from PARSE
in TSO COMMAND PROCESSOR VOL4-EXEC 36
catalog routine
in TSO COMMAND PROCESSOR VOL4-HELP 36
from dynamic allocation
from catalog routine
from IKJEFF02
from PARSE
Return code., checks
in TSO COMMAND PROCESSOR VOL1-CHNG 36
Return code, in second level messages
in TSO COMMAND PROC VOL6-WHEN/END 36
Return code, previous command
in TSO COMMAND PROC VOL6-WHEN/END 36
in PDL
Return code array
in GRAPHIC SUBRTN. PACKAGE
25
Return code from PARSE
in TSO COMAND PROC VOL2-CNCL/STATUS36
Return code registers
in TSO COMMAND PROCESSOR VOL6-TIME 36
RetUrn codes
in GRAPHIC SUBRTN. PACKAGE
25
in GSPARRAY
in register
passed by scissoring
structure
in GRAPHICS ACCESS METHOD
30
in GRAPHICS PROBLEM ORIENTED RTNS. 30
in PL/I SYNTAX CHECKER PLM
29
debugging hints for
from IKM12
from service function III (IKM135)
to system interface
in TSO COMMAND PROC VOL1-BROADCAST 36
from IEEVSDIO
from IKJEES40
from IKJPUTL
in TSO COMMAND PROC VOL1-SUBRTNS
36
from FREESPACE subroutine
from GETS PACE subroutine
from READ subroutine
from WRITE subroutine
in TSO COMMAND PROC VOL4-LISTALC
36

GY27-7236
GY33-8009

GY33-8000
GY30-2002
GY30-2002
GY30-2002
GY30-2027
GY28-6771
GY28-6772

GY28-6772
GY28-6774

GY28-6774
GY28-6774

GY28-6771
GY28-6776
GY28-6776
GY27-7152
GY28-6772
GY28-6776
GY27-7l52

GY27-7113
GY27-7110
GY33-8009

GY28-6771

GY28-6771

GY28-6774

RE':rtmll -

from IKJEHMEM
registers
in TSO COMMAND PROC VOL6-PROFlLE
from CHARCHEK
from LINECHEK
from PARSE
description of
field which contains
from PROFILE (IKJEFT82)
in TSO COMMAND PROC VOL6-PROTECT
CATALOG
dynamic allocation
SVC 98
in TSO COMMAND PROCESSOR VOLi-ACCT
in TSO ~OMMAND PROCESSOR VOL1-LIST
in TSO COMMAND PROCESSOR VOL2-CALL
BLDL macro
catalog routine
DAIR
problem program
in TSO COMMAND PROCESSOR VOL4-FREE
checking
registers
in TSO COMMAND PROCESSOR VOL6-RUN
in TSO COMMAND PROCESSOR VOL6-SEND
DAIR
IEEVSDIO
IKJPUTL
PARSE

Return

36 GY28-6776

36 GY28-6776

36 GY28-6771
36 GY28-6771
36 GY28-6772

36 GY28-6774
36 GY28-6776
36 GY28-6776

TPUT

in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
as tested by Mainline
in TSO TMP & SERVICE ROUTINES
36 GY28-6170
Catalog Information Routine
Command Scan service routine
Default service routine
Dynamic Allocation Interface Routine
GETLINE service routine
LOCATE routines
Parse service routine
PUTGET service routine
PUTLINE service routine
STACK service routine
Terminal Monitor Program
Validity Check Exit Routine
in UTILITIES
32 GY28-6614
ATLAS
IEBCOMPR
Return codes from exit routine
in TSO COMAND PROC VOL2-CNCL/STATUs36 GY28-6772
RETURN-I EKT RN
in FORTRAN IV (H) COMPILER
25 GY28-6642
Return interface routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
RETURN macro
in TSO COMMAND PROC VOL4-LISTBC
36 GY28-6774
to LOGON (IKJEFLH)
to mainline processing
to TMP
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
RETURN macro-instruction
in FORTRAN IV (E)
25 GY28-660l
compile-time u~e of
in GRAPHIC SUBRTN. PACKAGE
25 GY27-7l52
Return parameter list (DUIDL)
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771
Return point address
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY28-6772
Return procedure
in ALGOL-TO-PL/l LCP
29 GY33-7006

RETURN -

392

RGAFC

RETURN register
in FORTRAN IV (G) COMPILER
25
definition
description
Return registers
29
in PL/I SYNTAX CHECKER PLM
to all calling modules
REI'URN routine
in PL/I SUBROUTINE LIBRARY
29
REI'URN statement
in FORTRAN IV (E)
25
compile-time processing
of
in FORTRAN IV (G) COMPILER
25
Polish notation for
in FORTRAN IV (H) COMPILER
25
phase 25 processing of
in FORTRAN IV-TO-PL/1 LCP
29
Return storage routine (FREECORE)
in LOADER
31
synopsis of
Return-to-TESTRAN
37
in TESTRAN
flag
PSW
Return to TMP
in TSO COMMAND PROC VOL2-ALLOCATE 36
Returning control
in GRAPHIC SUBRTN. PACKAGE
25
RETURNS (keyword attribute)
in PL/I SYNTAX CHECKER PLM
29
attribute list
checking of
in GENERIC attribute list
Precision attribute in list
subroutine RETURNS, RTRNS (IKM23)
RETURNS (keyword option)
in PL/I SYNTAX CHECKER PLM
29
RETURNS attribute
in ALGOL-TO-PL/1 LCP
29
RETVATT1, field in common
in TSO COMMAND PROC VOL5-0PERATOR

REVERT (keyword statement)

GY28-6638

GY33-8009

29 GY33-8009
checking of
subroutine CONDIS (IKM21)
REVERT statement
in PL/I SUBROUTINE LIBRARY
29 GY28-6B01
REVERT statements" dictionary entries
in PL/I (F) COMPILER
29 GY28-6800

GY28-6801
GY28-6601
GY28-6638
GY28-6642
GY33-7000
GY28-6714
GY28-6611

GY28-6772
GY27-7152
GY33-8009

GY33-8009
GY33-7006

36 GY28-6775

RETYPE
---rn-MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
REUS
in LINKAGE EDITOR (F)

~PL/I SYNTAX CHECKER PLM

31 GY28-6667

Reusability-copy subtask
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage

REVIEW option on RECALL frame
in GRAPHIC JOB PROCESSOR SUPPORT
REVIEW option on the RECALL
frame
in S/360 JOB PROCESSING 1130/2250

36 GY27-7159
36 GY27-7166

REW and RWU Command Processor (IIOCZREW)
in 7074 EMULATE FOR M/165
GY27-7228
flowchart
function
MOD
REWALL Command routine (IITCDRWA)
---rn-EMULATOR FOR 7090/7094/709411
description
flowchart
REWIND (ENVIRONMENT option)
---rn-PL/I SYNTAX CHECKER PLM
Rewind-all routine
in 7074 EMULATE FOR M/165
Rewind and Unload Command routine
(IITCDRUN)
in EMULATOR FOR 7090/7094/709411
Rewind and Unload Instruction routine
(IITSELRU)
in EMULATOR FOR 7090/7094/709411
description
flowchart
Rewind and Unload routine (EMUNLOAD)
in EMULATOR FOR 7090/7094/709411
description
flowchart
Rewind Command routine (IITRCDREW)
in EMULATOR FOR 7090/7094/7094rI
Rewind Instruction routine (IITSELRW)
in EMULATOR FOR 7090/7094/709411
description
flowchart
Rewind routine
in 7074 EMULATE FOR M/165
REWIND statement
in FORTRAN IV (E)
compile-time processing of
object-time implementation

35 GY27-7187

29 GY33-B009
GY27-7228
35 GY27-7187
35 GY27-7187

35 GY27-7187

35 GY27-7187
35 GY27-7187

GY27-7228
25 GY2B-6601

Reusable attribute (REUS)
in LINKAGE EDITOR (F)
31 GY28-6667
Reusable disk queuing
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029

REWRITE (keyword statement)
in PL/I SYNTAX CHECKER PLM
record I/O statement
REWRITE statement, processing
in COBOL-TO-PL/1 LCP

29 GY33-7007

REZOOMLK
in CRJE PLM

36 GY30-2011

Reuse of current table
TCAM SERVICEABILITY AIDS

RFIND macro
in CRJE PLM

36 GY30- 2011

RFT (request for test)
in TCAM SERVICEABILITY AIDS
RFT (request-for-test) message
in BASIC TELECOMM. ACCESS METHOD

30 GY30-2027

RGAFC
in COBOL (E)

24 GY24-5009

--rn

30 GY30-2027

Reverse merge
in FORTRAN IV (G) COMPILER
25 GY28-6638
merging control block
information
Reverse Polish-notated data set
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
definition
updating of
use of

29 GY33-B009

30 GY30-2001

393
RGEN1

--rn

COBOL (E)

24 GY24-5009

~ COBOL (E)

24 GY24-5009

RGEl' macro
---rn CRJE PLM

36 GY30-2011

RGNCTR counter
in COBOL (F)

24 GY28-6382

RG.EN2

RGNUM, fie1d in 1DAREA

~ TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

RGN02
in COBOL (E)

24 GY24-5009

RGN12
in COBOL (E)

24 GY24-5009

RGENl - RLD

user directory
RJE/CRJE centra1 command schedu1ing routine
in CRJE PLM
36 GY30-2011
RJE initia1ization
in REMGrE JOB ENTRY
36 GY3o- 2005
RJE initia1ization routine
in REMGrE JOB ENTRY
36 GY3o- 2005
RJE input processing
in REMOTE JOB ENTRY
36 GY30-2005
RJE modu1e name index
in REMGrE JOB ENTRY
36 GY30-2005
RJE output processing
in REMGrE JOB ENTRY
36 GY30-200S
RJE reader routines
in REMOTE JOB ENTRY
36 GY30-2005
RJE subtask operation
in REMGrE JOB ENTRY
36 GY30-2005
RJE use of mu1tip1e tasks in MVT
in REMGrE JOB ENTRY
36 GY30- 2005
RJE writer
in REMOTE JOB ENTRY
36 GY30-2005

RGN20

~ COBOL (E)

RGOON
in COBOL (E)
RGTIN
in COBOL (E)

24 GY24-5009
24 GY24-5009

RJEND command processor

~ REMGrE JOB ENTRY

36 GY30-2005

RJSTART command processor
in REMGrE JOB ENTRY

36 GY30-2005

24 GY24-5009
in COBOL-TO-PL/1 LCP

29 GY33-7007

in PL/I SYNTAX CHECKER PLM

29 GY33-8009

RG105

~ COBOL (E)

RG12N
in COBOL (E)
Right
in
Right
in
Right
in

bracket
ALGOL-TO-PL/1 LCP
parenthesis
ALGOL-TO-PL/1 LCP
source margin (RSM)
PL/I SYNTAX CHECKER PLM

24 GY24-5009
24 GY24-5009
29 GY33-7006
29 GY33-7006
29 GY33-8009

RINTRCPT subroutine
in QUEUED TELECOMM. ACCESS METHOD
chart

30 GY30-2002

RINTREL subroutine
in QUEUED TELECOMM. ACCESS METHOD
chart

30 GY30-2002

RIQE
in MVT SUPERVISOR

36 GY28-6659

RJBGN routine
in REMOTE JOB ENTRY

36 GY30-2005

RJCT
in CRJE PLM

36 GY30-2011

RJE
in CRJE PLM
RJE acronyne
in REMOTE JOB ENTRY
RJE c1osedown
in REMOTE JOB ENTRY
RJE contro1 b10cks
in REMOTE JOB ENTRY
1ine contro1 b10ck (LCB)
subtask contro1 b10ck (STCB)
RJE contro1 tab1es
in REMOTE JOB ENTRY
Fastab1e
JED tab1e
1ine tab1e
termina1 directory

36 GY30-2011
36 GY30-2005
36 GY30-2005
36 GY30-2005

36 GY30-2005

RLD
in FORTRAN IV (E)
in FORTRAN IV (H) COMPILER
entry point
record
in LINKAGE EDITOR (F)
in LOADER
in PL/I (F) COMPILER
RLD buffer
in LINKAGE EDITOR (F)
first pass
genera1 description of use
grouping RLD information in
in sing1e pass processing
in MVT SUPERVISOR
RLD card images
in FORTRAN IV (E)
generation of
RLD cards
in COBOL (F)
definition
in FORTRAN IV (G) COMPILER
RLD contro1 b10ck
in LINKAGE EDITOR (F)
initia1ization (IEWLMREL)
input contro1 b10ck
format
output contro1 b10ck
format
RLD/contro1 record
in LINKAGE EDITOR (F)
RLD f1ags
in LINKAGE EDITOR (F)
in re1ocation address constants
(tab1e)
processing (tab1e)
RLD input buffer
in LINKAGE EDITOR (F)
RLD note 1ist
in LINKAGE EDITOR (F)
format
introduction to

25 GY28-6601
25 GY28-6642
31 GY28-6667
31 GY28-6714
29 GY28-6800
31 GY28-6667

36 GY28-6659
25 GY28-6601
24 GY28-6382
25 GY28-6638
31 GY28-6667

31 GY28-6667
31 GY28-6667

31 GY28-6667
31 GY28-6667

RLD - Rollout

394

RLD note list
I in LINKAGE EDITOR (F)
31 GY28-6667
L--------------------------------------(continued)
making entries in
reading from SYSUT1
use in locating RLD records
use in relocating address
constants
RLD output buffer
in LINKAGE EDITOR (F)
31 GY28-6667
RLD pointers
in LINKAGE EDITOR (F)
31 GY28-6667
in LOADER
31 GY28-6714
meaning of
RLD read routine (RDRLD) processing
in LINKAGE EDITOR (F)
31 GY28-6667
chart
in program organization
RLD record
in ALGOL (F) COMPILER
26 GY33-8000
in LINKAGE EDITOR (F)
31 GY28-6667
created for overlay
format
in load module
in object module
processing (RLD001)
in MVT SUPERVISOR
36 GY28-6659
format of
RLD roll
in FORTRAN IV (G) COMPILER
25 GY28-6638
RLD set
in LINKAGE EDITOR (F)
31 GY28-6667
definition
use in relocating address
constants
written on SYSUT1
RLD write routine (on SYSUT1) (RLDBUF)
in LINKAGE EDITOR (F)
31 GY28-6667
chart
in program organization
RLDBUF
-rDLINKAGE EDITOR (F)

31 GY28-6667

RLDCRD routine
-rDCOBOL (F)

24 GY28-6382

RLDTBL table
in COBOL (F)

24 GY28-6382

RLD001
-rDLINKAGE EDITOR (F)

31 GY28-6667

RLGB (Re-LOgon Buffer), format
of

in TSO CONTROL PROGRAM

36 GY28-7199

Rlseall subroutine
in GRAPHICS ACCESS METHOD

30 GY27-7113

RLSEBFR macro instruction
in GRAPHICS ACCESS METHOD

30 GY27-7113

RMAJOR-IEKJA4
in FORTRAN IV (H) COMPILER
RMAJOR table
in FORTRAN IV (H) COMPILER

25 GY28-6642

Rmax
---rn SORT/MERGE

33 GY28-6597

25 GY28-6642

RMES

---rn ALGOL-TO-PL/1 LCP
in MVT JOB MANAGEMENT

29 GY33-7006
36 GY28-6660

RMS (Recovery Management Support)
in TSO CONTROL PROGRAM
36 GY28-7199
general description
indication of RCT failure
initialization of control blocks
for
TSO interface with
RMS communications area
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
'rname' used in ENQ wacro instruction
in CATALOG MANAGEMENT
30 GY28-6606
Rname

---rn

MFT SUPERVISOR
in MVT SUPERVISOR
meaning of
Rname used in ENQ macro instruction
in TSO CATALOG MANAGEMENT

RNMI'BL table
---rn-COBOL (F)

36 GY27-7236
36 GY28-6659
36 GY28-6745
24 GY28-6382

RNT

in LINKAGE EDITOR (F)
ROL-ROUT routine
---in COBOL (F)

31 GY28-6667
24 GY28-6382

ROLL ADR table
---rn FORTRAN IV (G) COMPILER
25
in IEYROL
in Invocation
location in storage
use in allocating storage
use in finding address of variable
use in releasing storage
Roll control instructions
in FORTRAN IV (G) COMPILER
25
Roll controls
in FORTRAN IV (G) COMPILER
25
general
Roll module (IEYROL)
in FORTRAN IV (G) COMPILER
25
definition
detailed description
general description
location in storage
ROLL parameter
in MVT SUPERVISOR
36
Roll statistics
in FORTRAN IV (G) COMPILER
25
BASE, BOTTOM, TOP
location in storage
Roll storage area
in FORTRAN IV (G) COMPILER
25
definition
general description
ROLLBR register
in FORTRAN IV (G) COMPILER
definition
description
BRDCST and MSG slot
directories
in REMOTE JOB ENTRY

GY28-6638

GY28-6638
GY28-6638
GY28-6638

GY28-6659
GY28-6638

GY28- 6638

25 GY28-6638

Rollin-~ollout

Rollout
in INITIAL PROGRAM LOADER AND NIP
data set
parameter list
Rollout I/O Queue Element (RIQE)
in MVT SUPERVISOR
construction of
format of

36 GY30-2005
36 GY28-6661

36 GY28-6659

395
Rollout I/O Queue Element (RIQE)
I in MVT SUPERVISOR
36 GY28-6659
L--------------------------------------(continued)
normal release of
Rollout/Rollin feature
36 GY28-6659
in MVT SUPERVISOR
Rollout/Rollin module
36 GY28-6659
in MVT SUPERVISOR
description of
entry point name of
flowcharts of
module name for
scheduling of
synopsis of
Rolls

---rn FORTRAN IV

(G) COMPILER
ADCON
ADR CONST
AFTER POLISH
allocating storage for
ARRAY
ARRAY DIMENSION
ARRAY PLEX
ARRAY REF
AT

BASE TABLE
BCD
BRANCH TABLE
BYTE SCALAR
CALL LBL
CODE
COMMON ALLOCATION
COMMON AREA
COMMON DATA
COMMON DATA TEMP
COMMON NAME
COMMON NAME TEMP
COMPLEX CONST
DATA SAVE
DATA VAR
definition of
detailed description
miY DIMENSION
DO LOOPS OPEN
DP COMPLEX CONST
DP CONST
ENTRY
ENTRY NAMES
EQUIV ALLOCATION
EQUIVALENCE (EQUIV)
EQUIVALENCE (EQUIV) HOLD
EQUIVALENCE (EQUIV) TEMP
EQUIVALENCE OFFSET
ERROR
ERROR CHAR
ERROR LBL
ERROR MESSAGE
ERROR SYMBOL
ERROR TEMP
EXIT
EXPLICIT
FL AC
FL CONST
FORMAT

formats
FULL WORD SCALAR
FX AC
FX CONST
GENERAL ALLOCATION
general description
GLOBAL DMY
GLOBAL SPROG
HALF WORD SCALAR
HEX CONST
IMPLICIT

25 GY28-6638

Rollout - Rotational

IND VAR
INIT
LBL
LIB
LITERAL CONST
LITERAL TEMP
LOCALDMY
LOCAL SPROG
location in storage
LOOP CONTROL
LOOP DATA
LOOP SCRIPT
NAMELIST ALLOCATION
NAMELIST ITEMS
NAMELIST MPY DATA
NAMELIST NAMES
NEST SCRIPT
NONSTD SCRIPT
POLISH
PROGRAM SCRIPT
pruning of
REG
releasing of
reserving of
RLD
SCALAR
SCRIPT
size limitations
SOURCE
special
SPROG ARG
STD SCRIPT
SUBCHK
TEMP
TEMP AND CONST
TEMP DATA NAME
TEMP NAME
TEMP POLISH
TEMP PNTR
used by Allocate
used by Exit
used by Gen
used by Parse
used by Unify
USED LIB FUNCTION
WORK
ROMAC
---rn
COBOL

(E)

Root module
--rn ONLINE TEST EXECUTIVE PROGRAM
contents of
description of
illustration of
in TESTRAN
Root segment
in FORTRAN IV (H) COMPILER
in LINKAGE EDITOR (F)
in overlay module
placing called modules in
in TESTRAN
in UPDATE ANALYSIS PROGRAM
ROPT
----rn ONLINE TEST EXECUTIVE PROGRAM
in glossary
in operation diagram

24 GY24-5009
37 GY28-6651

37 GY28-6611
25 GY28-6642
31 GY28-6667
37 GY28-6611
36 GY28-7106
37 GY28-6651

ROS parity error
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
Rotational position sensing
in DIRECT ACCESS DEVICE SPACE MGT,. 30 GY28-6607
in INDEXED SEQUEN. ACCESS METHOD
30 GY28-6618
devices

396

Rotaticmal - Routines

Rotational position sensing
I in INDEXED SEQUEN. ACCESS METHOD 30 GY28-66l8
L--------------------------------------(continued)
identification in DEB
start I/O appendages
in SEQUENTIAL ACCESS METHODS
30 GY28-6604
checking for feature
Rotational Position sensing (RPS)
in SEQUENTIAL ACCESS METHODS
30 GY28-6604
Rotational positional sensing (RPS)
in MVT JOB MANAGEMENT
36 GY28-6660
ROUND option
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
Allocate routine
Release routine
ROUNDED option
in COBOL (F)
Rounding
in ALGOL-TO-PL/l LCP

24 GY28-6382
29 GY33-7006

ROUTCD (routing code)
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
ROUTCDE (route code)
in PL/I SUBROUTINE LIBRARY

29 GY28-680l

Route routine
--rn
QUEUED TELECOMM.

30 GY30-2002

ACCESS METHOD
chart
Router" action
---rn-TESTRAN
Router, editor
in TESTRAN
Router, interpreter
in TESTRAN
Router routine
in JOB MANAGEMENT
in MVT JOB MANAGEMENT
Routine
in ALGOL-To-PL/l LCP
ARPRO
ARRAYS
ASPRO
BEG PRO
COMENT
DECLAR
DEPOIN
DESPEC
EXPRO
FORPRO
GLABEL
GOTOPRO
IFPRO
IOPRO
LEND
LETR
PALGEN
PAREN
PDCPRO
PENPRO
PROCED
PRPRO (Phase 30)
PRPRO (Phase 40)
PVIRGU'
QUOT
RTNGEN
SCAN

SDCID
SPECIF
SWITCH
UNPOIN
VNSPEC

37 GY28-66ll
37 GY28-66ll
37 GY28-66ll
36 GY28-66l3
36 GY28-6660
29 GY33-7006

in TSO COMMAND PROC VOL4-LISTBC
36
called
directory
external to LISTBC
label
in TSO COMMAND PROC VOL6-RENAME
36
ini tialization
mainline
names
in TSO COMMAND PROCESSOR VOL1-ACCT 36
in TSO COMMAND PROCESSOR VOL4-EXEC 36
called
directory
label
Routine, extended precision simulator
in INITIAL PROGRAM LOADER AND NIP 36
Routine, trace
in PL/I (F) COMPILER
29
Routine descriptions
in EMULATOR FOR 7090/7094/709411
35
emulator
postprocess or
preprocessor
in TSO COMMAND PROC VOL6-SUBMIT
36
Routine directory
in TSO COMAND PROC VOL2-CNCL/STATUS36
in TSO COMMAND PROC VOL1-BROADCAST 36
in TSO COMMAND PROC VOL1-DELETE
36
in TSO COMMAND PROC VOL1-SUBRTNS
36
in TSO COMMAND PROC VOL2-DELETE
36
in TSO COMMAND PROC VOL4-LISTALC
36
in TSO COMMAND PROC VOL5-0PERATOR 36
in TSO COMMAND PROC VOL5-0UTPUT
36
in TSO COMMAND PROC VOL6-PROFILE
36
in TSO COMMAND PROC VOL6-PROTECT
36
in TSO COMMAND PROC VOL6-SUBMIT
36
in TSO COMMAND PROC VOL6-TERMINAL 36
in TSO COMMAND PROC VOL6-WHEN/END 36
in TSO COMMAND PROCESSOR VOLl-ACCT 36
in TSO COMMAND PROCESSOR VOL1-CHNG 36
in TSO COMMAND PROCESSOR VOL1-LIST 36
in TSO COMMAND PROCESSOR VOL6-RUN 36
IKJEFROO
in TSO COMMAND PROCESSOR VOL6-SEND 36
in TSO COMMAND PROCESSOR VOL6-TIME 36
Routine displacement tables
in FORTRAN IV (E)
25
format of
use of
Routine entry block (REB)
in GRAPHICS ACCESS METaOD
30
Routine Index
in ALGOL (F) COMPILER
26
Routine labels
in TSO COMMAND PROC VOL2-ALLOCATE 36
Routine names
in TSO COMMAND PROC VOL2-ALLOCATE 36
in TSO COMMAND PROC VOL5-LISTCAT
36
directory of
in TSO COMMAND PROC VOL5-LISTDS
36
in TSO COMMAND PROC VOL6-WHEN/END 36
Routine type
in UPDATE ANALYSIS PROGRAM
36
Analysis control
Change Table build
Control-card
Deletion
Initialization

GY28-6774

GY28-6776

GY28-677l
GY28-6774

GY28-666l
GY28-6800
GY27-7l87

GY28-6776
GY28-6772
GY28-677l
GY28-677l
GY28-677l
GY28-6772
GY28-6774
GY28-6775
GY28-6775
GY28-6776
GY28-6776
GY28-6776
GY28-6776
GY28-677(
GY28-6771
GY28-677l
GY28-6771
GY28-6776
GY28-6776
GY28-6776
GY28-660l

GY27-7ll3
GY33-8000
GY28-6772
GY28-6772
GY28-6775
GY28-6775
GY28-6776
GY28-7l06

Log

Member analysis
Read and scan
Termination
Routine)
in TSO COMMAND PROCESSOR
Routines
in COBOL (F)

VOL1-~CCT

36 GY28-677l
24 GY28-638~

397
Routines
I in COBOL (F)
24 GY28-6382
L--------------------------------------(continued)
A-Text Generator
ACCEPT (subroutine)
ACCMET (subroutine)
ALTER
APPSCN
ATRLNT
BMBSRN (subroutine)
CFF-ROUT (subroutine)
CHECKPOINT (subroutine)
CHF-ROUT (subroutine)
CHKLHN
CLOSE (subroutine)
COMPARE (subroutine)
COMPUT
COPY-BASIS
CORRTN
CSM-ROUT
CTB-ROUT
CTF-ROUT (subroutine)
CTH-ROUT (subroutine)
J3DSCN
DEBUG

DECSUP
DELIM
DET-ROUT
DICENT
DICSPC
DICTBD
DISPLAY (subroutine)
DUMGEN
D6PNi0
D6RL20
D6SRi0
D6000
ENDPTX
ENOPAT
ENTDEL

ENTNAM
ENTPTR
ENVSCN
EOSTGP
l.RRLOD
ERROR (subroutine)
ESDCRD
l:XHIBIT (subroutine)
FDSCN
FILEST
FILSCV
FORMLA (subroutine)
FST-ROUT
FSTEXT
F2EOF
F4FIN
GENOP
GENSEQ
GET
GETCRD
GETDLM
GETF4
GETPTR
GETWD
GINITl
GINIT2
GINIT3
GLOSRY
GNEQUR
GSPICT
IDDSCN
I DENT

IDLHN
.IF

INITl
INIT2

Routines - Routines

INIT3
INSERT
INTACC
INTi
INT2
INT3
INT4
INT5
INT6
INT7
LATACP
LATGRP
LATRNM
LATRPT
LDELNM
LDTEXT
LINKA
LINKST
LOCNXT
LST-ROUT
LTLRTN
MACPRO
MAC020
MAPLOC
MOVDIC
MOVE (subroutine)
NOTS'IG
ON
OPPRO
PDATEX
PDSCN
PDT020
PDUCOP
PERFORM
PFINDL (subroutine)
PGF-ROUT (subroutine)
PGH-ROUT (subroutine)
PGTINT
PHCTRL
PHI NIT
PH5CTL
PH6

PLS005
PNBPRD
PNDEFR
PNEQUR
PNUPRO
PRDONE
PRFTWO
PRGEND
PRIME
PROCOi
PROC02
PRONAM
PUT
QUALIF
RDSCAN
RDSCN
RDSYN
RDTEXT

RDUCOP (subroutine)
READ
READFN
READF2
REDEF
REPORT
REPORT WRITER
RLDCRD
ROL-ROUT
RPF-ROUT (subroutine)
RPH-ROUT (subroutine)
RRNSCN
RST-ROUT
SDSCN
SDTEXT
SEARCH

Routines - RQ

398

Routines
I in COBOL (F)
24 GY28-6382
L--------------------------------------(continued)
SELSCN
SE6000
SE6010
SE6025
SMESCN
SSCRPT
STATIC
STRING
SUBSCR (subroutine)
SYAA,SYAB,
s6800
TABREL
TAMEIN
TAMEOP
TBGETSPC
TBREADIC
TBSPILL
TBWRITE
TCPNCH
TGTINT
TRACE (subroutine)
TYPE
USER ERROR
USING
USM-ROUT
VALGEN
VERB ANALYSIS
VIRRTN
VRBSCN
WGO
WOUT
WPCH
WRITE (subroutine)
WRITEA
WRT-ROUT
WSTSCT
in GRAPHICS ACCESS METHOD
30 GY27-7ll3
attention handling
error handling
graphic data management
input/output control
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-677l
directory
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
called by CALL
directory
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
directory
reference on diagram
relationships
validity checking
used by IKJEFHOl
Routines, control block
in COBOL-TO-PL/l LCP
29 GY33-7007
Routines, test
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-665l
discussion of
illustration of
Routines, validity checking
in TSO COMMAND PROC VOL6-PROFILE
36 GY28-6776
Routines called by
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
IKJEHCIR
IKJEDEF
IKJEHDEL
Routines called by IKJEFROO
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
Routines called by IKJEFT80
in TSO COMMAND PROC VOL6-TERMINAL 36 GY28-6776
Routing code
in EMULATOR FOR 7090/7094/709411
Routing codes

35 GY27-7187

in CRJE PLM
Routing tables-IEHPROGM
in UTILITIES

36 GY30- 2011
32 GY28-66l4

ROUTSE

~COBOL (E)

24 GY24-5009

Row-binary format
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
Row to Column Binary Rotation routine
(IITURRC)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
Row Vector
in ALGOL (F) COMPILER
26 GY33-8000
RPAFND (subscript checking)
in PL/I SYNTAX CHECKER PLM
as expression (IKM133)

29 GY33-8009

RPE (right parenthesis of expression)
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
RPEFND (expression checking)

~PL/I SYNTAX CHECKER PLM

29 GY33-8009

in IKM133
RPF-ROUT subroutine
---in COBOL (F)

24 GY28-6382

RPH-ROUT subroutine
---in COBOL (F)

24 GY28-6382

RPLYFLG switch
in ONLINE TEST EXECUTIVE PROGRAM

37 GY28-665l

----rI1CRJE

RPOINT macro
PLM

36 GY30-20ll

RPR.RCD
in COBOL (F)

24 GY28-6382

RPS

in MVT JOB MANAGEMENT
in SEQUENTIAL ACCESS METHODS
RPS (right parenthesis of subscript)
in PL/I SYNTAX CHECKER PLM
RPS feature
in DIRECT ACCESS DEVICE SPACE MGT.
channel programming
Extend processing
ISAM Allocate processing
LSPACE processing
normal Allocate processing
Release processing
Rename processing
SCratch processing

36 GY28-6660
30 GY28-6604
29 GY33-8009
30 GY28-6607

RPT.LIN
in COBOL (F)

24 GY28-6382

RPT.RCD
in COBOL (F)

24 GY28-6382

RPTKEY
---rn-COBOL-TQ-PL/l LCP

29 GY33-7007

RPTSAV field
-----:ri1COBOL (F)

24 GY28-6382

BQ parameter
in INITIAL PROGRAM LOADER AND NIP
RQ record
in COBOL-TO-PL/l LCP
RQ record, processing
in COBOL-TO-PL/l LCP

36 GY28-666l
29 GY33-7007
29 GY33-700")

399
RQATN
in GRAPHIC SUBRTN. PACKAGE

25 GY27-7152

in MVT SUPERVISOR
36 GY28-6659
RQh (Reply Queue Element)
in TSO CONTROL PROGRAM
36 GY28-7199
processing of
when user is removed from
subsystem
when user is restored
R~B (request queue element)
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
channel end status
in data area directory
initialization of RQE
data area layout
diagram
RQE table
scheduling I/O
used by stage 2 exit effector routine
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
in TSO CONTROL PROGRAM
36 GY28-7199
as indication of long wait
condition
processing of
when user is removed from
subsystem
when user is restored
RQE queue (AEQA)
in MVT SUPERVISOR
36 GY28-6659
placing element on
removing element from
RQE table, described in module directory
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
RQEL (Region Queue Element)
in TSO CONTROL PROGRAM
Dri ver use of
error in specification
of
format of
initialization of
specifying number of

RTBP

RSIZFLGS, field in CHNGPDL
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
RSIZLNG, field in CHNGPDL
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
RSIZPTR, field in COMMON
in TSO COMMAND PROCESSOR VOL1-ADD

36 GY28-6771

RSIZSW, field in COMMON
---rn-TSO COMMAND PROCESSOR VOL1-ADD

36 GY28-6771

---rn

RSKIP macro
CRJE PLM

36 GY30-2011

RSLTFLG switch
in ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

in PL/I SYNTAX CHECKER PLM

29 GY33-8009

RSORSI
---rn-COBOL (E)

24 GY24-5009

RST-ROUT routine
--in COBOL (F)

24 GY28-6382

RSTARTLN subroutine
in QUEUED TELECOMM. ACCESS METHOD
chart

30 GY30-2002

RSTOPLN subroutine
in QUEUED TELECOMM. ACCESS METHOD
chart

30 GY30-2002

RSTRFLG switch
in ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

RSUBFC
---rn-COBOL (E)

24 GY24-5009

RSVC parameter
in INITIAL PROGRAM LOADER AND NIP

36 GY28-6661

RSVC=
in MFT SUPERVISOR
entry

36 GY27-7236

RSWITCH subroutine
in QUEUED TELECOMM. ACCESS METHOD
chart

30 GY30-2002

36 GY28-7199

RREAD macro
in CRJE PLM

36 GY30-2011

RRELEASM subroutine
in QUEUED TELECOMM. ACCESS METHOD
chart

30 GY30-2002

RRSCN routine
in COBOL (F)

24 GY28-6382

RR1, RR2, RR3, RR4
--in ASSEMBLER (F)

21 GY26-3700

RSA
in SORT/MERGE

ROATN -

33 GY28-6597

RSCRATCH macro
in CRJE PLM

36 GY30-2011

RSIGN
in COBOL (E)

24 GY24-5009

RSINST
---rIlCOBOL (E)

24 GY24-5009

RS1, RS2
--in ASSEMBLER (F)

21 GY26-3700

in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
RTA (IEURTA)
in ASSEMBLER (F)
21 GY26-3700
RTA/RTA+l format
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
RTAUTOPT macro instruction,
processing for
in TSO CONTROL PROGRAM

36 GY28-7199

RSIZADR, field in CHNGPDL
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

RTA1/RTA2
---rn DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
converted from XXYYZ format
in ISAM allocation
in Scratch routine

RSIZFLG, field in CHNGPDL
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

RTBP
in GRAPHIC SUBRTN. PACKAGE

25 GY27-7152

RTNFLD -

400

S

RTNFLD switch
---rn-ONLINE TEST. EXECUTIVE PROGRAM

37 GY28-6651

RTPRO
in FORTRAN IV-TO-PLll LCP

29 GY33-7000

RTPT1, processing at
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772

flowchart
function
MOD
RWBP, da ta area
~n TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

RWORK

~ TSO TMP

& SERVICE ROUTINES

36 GY28-6770

RTRNS

~ PLII SYNTAX CHECKER PLM

RTSTAE switch
~ONLINE TEST EXECUTIVE PROGRAM
RUN command handling routine
in EMULATOR FOR 7090/7094/709411
RUN command processor
in TSO COMMAND PROCESSOR VOL6-RUN
definition
functions
logic description
operating environment
operational considerations
physical characteristics
processing summary
storage requirements
Run data set
in TSO COMMAND PROCESSOR VOL3-EDIT
definition
use of
RUN list
in TSO COMMAND PROCESSOR VOL6-RUN
building
RUN subcommand
in TSO COMMAND PROCESSOR VOL3-EDIT
summary of operations
syntax
RUN subcommand processor, IKJEGRUN
in TSO COMMAND PROCESSOR VOL7-TEST
flowchart of
module description of
text description of
Run-time stack
in PL/I SUBROUTINE LIBRARY
RUNALL Command routine (IITCDRUA)
---rn-EMULATOR FOR 7090/7094/709411
description
flowchart
Rungs
in FORTRAN IV
definition
description

(G)

COMPILER

Running modules, list of
in SORT/MERGE
RUNPDL, parameter descriptor list
in TSO COMMAND PROCESSOR VOL6-RUN
format of
in data area directory

29 GY33-8009
37 GY28-6651
35 GY27-7187

RWRITE macro
in CRJE PLM

36 GY30-2011

RWRTBL table
in COBOL (F)

24 GY28-6382

RWxxxx, field in RWPB
in TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

RXINST
in COBOL (E)

24 GY24-5009

RXL (Recovery Extent List), format
of
in TSO CONTROL PROGRAM

36 GY28-7199

36 GY28-6776

~

36 GY28-6773

36 GY28-6776
36 GY28-6773

36 GY28-6777

29 GY28-6801
35 GY27-7187

(Recovery Extent List Queue
Element)
in TSO CONTROL PROGRAM
format of
initialization of
use of
by RMS
to indicate RCT failure

36 GY28-7199

RX1, RX2
in ASSEMBLER (F)

21 GY26-3700

RlBCFLGS, field in BCRECl
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

R1BCMAX, field in BCRECl
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

R1BCP'lR, field in BCRECl
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

RlDSN, field in BCRECl
TSO COMMAND PROC VOL5-0PERATOR

---rn

36 GY28-6775

R1RECNUM, field in BCRECl
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

25 GY28-6638
R1RES, field in BCRECl

~ TSO COMMAND PROC,VOL5-0PERATOR

36 GY28-6775

R1RLD

33

GY28-65~7

36 GY28-6776

RUNTBL table
in COBOL (F)
format

24 GY28-6382

RUSE tabl.e
in FORTRAN IV (H) COMPILER

25 GY28-6642

RV record
-- in COBOL-TO-PL/l LCP

29 GY33-7007

RWA and RUA Command Processor (IIOC2RWA)
---in 7074 EMULATE FOR M/165
GY27-7228

~ ASSEMBLER (F)

21 GY26-3700

R1USFLGS, field in BCRECl
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

R1USPTR, field in BCRECl
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
S operator
in FORTRAN IV SYNTAX CHECKER PLM
25 GY28-6831
assembler language equivalent for
description of
S-Reg parity error
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155!

s. nnnn -

401
S.nnnn (report writer data-name)
in COBOL (F)

24 GY28-6382

SADV (String Array Dope Vector)
in PL/I SUBROUTINE LIBRARY

29 GY28-6801

SAEC macro instruction
---rn GRAPHICS ACCESS METHOD

30 GY27-7113

SALRM
in GRAPHIC SUBRTN. PACKAGE

25 GY27-7152

SAJ.VlAR

---rn

COBOL (E)

24 GY24-5009

SAME AREA clause
---rn COBOL (F)
SAME clause
in COBOL (F)

24 GY28-6382

SAMGEl'
in COBOL (E)

24 GY24-5009

24 GY28-6382

Sample dump
in MVT SUPERVISOR
36 GY28-6659
format of
Sample Error-Recovery Record
in MACHINE-CHECK HANDLER. S360 M65 31 GY27-7155
SAMTBL table
in COBOL (F)

24 GY28-6382

SAMTR
in COBOL (E)

24 GY24-5009

SAOP adjective code
in FORTRAN IV (E)
in intermediate text

25 GY28-6601

Satellite Control Table (SCT)
in S/360 JOB PROCESSING 1130/2250
description of
format and contents of
Satellite Graphic Job
Processor (SGJP)
in S/360 JOB PROCESSING 1130/2250
definition of
components of
control in 1130
data sets required for
data transmission for
overall operations of
program in system/360
program in 1130
System/360 functions of
system/360 routines
special operating system
routines for
1130 functions of
1130 routines

36 GY27-7166

36 GY27-7166

SAVEAREA
in EMULATOR FOR 7090/7094/709411
at entry to control routine
setting
SAVELEVl-4
in PL/I SYNTAX CHECKER PLM
in DATAAREA DSECT
pointer to
SAVEREG. in WORKAREA
in TSO COMMAND PROC VOL6-SUBMIT
21 GY26-3700

Save area
---rn FORTRAN IV (G) COMPILER
assigning storage for
definition
position in object module
in PL/I SUBROUTINE LIBRARY
chain
trace
in TESTRAN
SAVE-AREA
in COBOL (F)
Save area. pointer to

in TSO COMMAND PROC VOL2-ALLOCATE
routine is in control
in S/360-1130 DATA TMN. - FORTRAN
acquiring storage for
format of
freeing storage for
use of
Save area. used when
System/360 asynchronous
Save area (control task)
in PL/I SUBROUTINE LIBRARY
Save area (dump index)
in PL/I SUBROUTINE LIBRARY
Save area management
in TELECOMMUNICATION ACCESS METHOD
Save area register
in TSO COMMAND PROC VOL1-DELETE
in TSO COMMAND PROC VOL2-DE~TE
in TSO COMMAND PROC VOL5-LISTDS
in TSO COMMAND PROCESSOR VOL1-CrlNG
in TSO COMMAND PROCESSOR VOL2-CALL
in TSO COMMAND PROCESSOR VOL4-FREE
in TSO COMMAND PROCESSOR VOL6-TIME
SAVE-AREA-3 field
in COBOL (F)
Save areas
in EMULATOR FOR 7090/7094/7094II
in FORTRAN IV (H) COMPILER
in PL/I SYNTAX CHECKER PLM
in TSO COMMAND PROC VOL4-LISTALC
Save areas. standard
in PL/I SUBROUTINE LIBRARY
Save routine
in TESTRAN
SAVE subcommand
in TSO COMMAND PROCESSOR VOL3-EDIT
summary of operations
syntax
SAVE subcommand processor
in CRJE PLM
entry point code
flowchart
function
messages requested
microfiche directory
register usage
in TSO COMMAND PROC VOL5-0UTPUT

25 GY28-6638

Saving data set information
in TSO COMMAND PROCESSOR VOL7-TEST
saving input labels-IEBCOMPR
in UTILITIES
Saving -registers
in PL/I (F) COMPILER
Saving the environment
in MACHINE-CHECK HANDLER. M135/145

SA3C'l'R

36 GY28-6772
25 GY27-7161

29 GY28-6801
29 GY28-6801
30 GY30-2029
36
36
36
36
36
36
36

GY28-6771
GY28-6772
GY28-6775
GY28-6771
GY28-6772
GY28- 6774
GY28-6776

24 GY28-6382
35
25
29
36

GY27-7187
GY28-6642
GY33-8009
GY28-6774

29 GY28-6801
37 GY28-6611
36 GY28-6773

36 GY30-2011

36 GY28-6775
35 GY27-7187

29 GY33-8009

36 GY28-6776
36 GY28-6777
32 GY28-6614
29 GY28-6800
30 GY27-7237

29 GY28-6801
37 GY28-6611
24 GY28-6382

---rn

SAV14. field in work area
TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

SA3CTR field
in COBOL (F)

24 GY28-6382

SBEND -

402

SCANIDV

SBEND

---rn ASSEMBLER

(F)

21 GY26-3700

SBL

--in COBOL (F)
definition
SBL-I fields
in COBOL (F)
SBL numbers
in COBOL (F)
SbL-O fields
in COBOL (F)

24 GY28-6382
24 GY28-6382
24 GY28-6382
24 GY28-6382

SBLCTR counter
in COBOL (F)

24 GY28-6382

SELl field
---rn COBOL (F)

24 GY28-6382

SBLIM){
---rn-COBOL (F)

24 GY28-6382

SBPRO
in FORTRAN IV-TQ-PL/l LCP

29 GY33-7000

SC in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
SC Command Processor (IIOC4SC)
in 7074 EMULATE FOR Ml165
GY27-7228
function
MOD
SCA
---in S/360-1130 DATA TMN. - FORTRAN
SCALAR ALLOCATE routine
in FORTRAN IV (G) COMPILER
Scalar in DEFINED attribute
in PL/I SYNTAX CHECKER PLM
Scalar overlay defining
in PL/I (F) COMPILER
SCALAR roll
in FORTRAN IV (G) COMPILER
SCALAR routine
in FORTRAN IV (G) COMPILER
scalar values
in PL/I SUBROUTINE LIBRARY
Scalar variable
in FORTRAN IV (G) COMPILER
definition
listing of
position in object module
Scale factor
FORTRAN IV (H) COMPILER
Scale modifier
in TESTRAN

---rn

Scaling formulas
in GRAPHIC SUBRTN. PACKAGE
Scaling routine
in GRAPHIC SUBRTN. PACKAGE
SCAMxxxx, fields in LSCANBLK
in TSO COMMAND PROCESSOR VOLI-ADD
Scan
---rn FORTRAN IV (E)
of source statements
in TSO COMMAND PROCESSOR VOL4-HELP
by the processing routine
card image
control field of PARSETAB
SCAN
in ALGOL-TO-PL/l LCP
in COBOL-TO-PL/l LCP

25 GY27-7161
25 GY28-6638
29 GY33-8009
29 GY28-6800
25 GY28-6638
25 GY28-6638
29 GY28-680l
25 GY28-6638

25 GY28-6642
37 GY28-66ll
25 GY27-7l52
25 GY27-7152
36 GY28-677l
25 GY28-660l

Scan - not operator
in FORTRAN IV SYNTAX CHECKER PLM
25
assembler language equivalent for
description of
effect on source pointer
Scan, latual
in TSO COMMAND PROCESSOR VOLl-ADD 36
Scan arrow
in FORTRAN IV (G) COMPILER
25
definition
description
Scan control variables
in FORTRAN IV (G) COMPILER
25
Scan cursor
in PL/I (F) COMPILER
29
Scan Data String (AHlOO)
in COBOL (E)
24
Scan dictionary
in MVT JOB MANAGEMENT
36
Scan function
in TCAM SERVICEABILITY AIDS
30
Scan 1/11 Phase (IEXll)
in ALGOL (F) COMPILER
26
Description
Flowcharts
Scan III phase (IEX30)
in ALGOL (F) COMPILER
26
Description
Flowcharts
- Scan mode
in INDEXED SEQUEN. ACCESS METHOD
30
channel programs
close phase
control blocks and work areas
DCB work area
flowcharts
open phase
processing phase
queues
Scan mode, delayed
in CRJE PLM
36
Scan operator
in FORTRAN IV SYNTAX CHECKER PLM
25
assembler language equivalent for
description of
effect on source ptr
Scan routine
in CRJE PLM
36
in QUEUED TELECOMM. ACCESS METHOD 30
chart
in REMOTE JOB ENTRY
36
SCAN routine in pseudo-code phase
in PL/I (F) COMPILER
29
SCAN subcommand
in FORTRAN IV SYNTAX CHECKER PLM
25
in TSO COMMAND PROCESSOR VOL3-EDIT 36
summary of operations
syntax
SCAN subcommand processor
in CRJE PLM
36
entry point code
flowchart
messages requested
microfiche directory
module description
register usage

GY28-6831

GY28-6771
GY28-6638

GY28-6638
GY28-6800
GY24-5009
GY28-6660
GY30-2027
GY33-8000

GY33- 8000

GY28-66l8

GY30-201l
GY28-683l

GY30-20ll
GY30-2002
GY30-2005
GY28-6800
GY28-6831
GY28-6773

GY30-20l1

SCANDAT
in COBOL-TO-PL/l LCP

29 GY33-7007

SCANDSN branch point
in TSO COMMAND PROC VOL6-RENAME

36 GY28-6776

SCANIDV
in COBOL-TQ-PL/l LCP

29 GY33-7007

36 GY28-6774

29 GY33-7006
29 GY33-7007

403
SCANMODE
in PLiI SYNTAX CHECKER PLM
code for statement types
in DATAAREA DSECT
Scanning
in TSO COMMAND PROCESSOR VOL1-LIST
the command nodelist
the userid PCL
Scanning a control statement-IEBEDIT
in UTILITIES
Scanning control statements
in UTILITIES
Scanning of a queue
in TCAM SERVICEABILITY AIDS
SCANPTR. field in EXITPARM
in TSO COMMAND PROC VOL5-0PERATOR
SCANTREE subroutine
in MVT SUPERVISOR
function of

SCAT2
in S/360-1130 DATA TMN. - FORTRAN
SCB
in MFT SUPERVISOR
creation
format
in MVT SUPERVISOR
in TELECOMMUNICATION
in TSO TMP t SERVICE
SCB error word usage by
in TELECOMMUNICATION

36

~Y28-6771

in COBOL (E)

24 GY24-5009

SCHAM
in GRAPHIC SUBRTN. PACKAGE

25 GY27-7152

(IKASCH)

32 GY28-6614
32 GY28-6614
30 GY30-2027
36 GY28-6775

36 GY28-6659
36 GY28-6661
31 GY28-6667

31 GY28-6667
31 GY28-6667

36 GY28-6661

in S/360 JOB PROCESSING 1130/2250
chart
description of
In-Core Access Method

36 GY27-7166

(ICAM)

interface with
reader/interpreter
Schedule routine--scan mode
in INDEXED SEQUEN. ACCESS METHOD
30
description
flowchart
pointers to
Scheduler
in CONTROL PROGRAM WITH MFT
36
in DIRECT ACCESS DEVICE SPACE MGT. 30
building TIOT
issuing allocate SVC
return to
in INTRO. TO CONTROL PROGRAM LOGIC 36
in TSO CONTROL PROGRAM
36
Scheduler. OLT program
in ONLINE TEST EXECUTIVE PROGRAM
37
Scheduler Interface Routine (IKASCH)
in GRAPHIC JOB PROCESSOR SUPPORT
36
chart
description of
example of use in defining a job
In Core Access Method (ICAM)
interface with reader/interpreter
passing JCL statements to the
reader/interpreter
Scheduler lookup table
in JOB MANAGEMENT
36
Scheduler lookup table (SLOT)
in MVT JOB MANAGEMENT
36

GY28-6618

GY27-7128
GY28-6607

GY28-6605
GY28-7199
GY28-6651
GY27-7159

GY28-6613
GY28-6660

31 GY28-6667

31 GY28-6714
36 GY28-6659

25 GY27-7161

36 GY28-6659
ACCESS METHOD 30 GY30-2029
ROUTINES
36 GY28-6770
module
ACCESS METHOD 30 GY30-2029

scheduling
in SEQUENTIAL ACCESS METHODS
Scheduling a job
in GRAPHIC JOB PROCESSOR SUPPORT
background
example
foreground
Scheduling of BISAM
in INDEXED SEQUEN. ACCESS METHOD
channel programs
scheduling of jobs
in TSO COMMAND PROCESSOR VOL4-EXEC
Scheduling successor
modules
in MACHINE-CHECK HANDLER. M135/145
Scheduling transient
modules
in MACHINE-CHECK HANDLER. M135/145
Scheduling 7074 interrupts
in 7074 EMULATE FOR M/165
SCHEDULR macro in~truction
in JOB MANAGEMENT

SCD

SCDENTAB

31 GY28-6667

schedule Interface Routine

36 GY27-7236

in CONTROL PROGRAM WITH MFT
in MVT JOB MANAGEMENT
update of
SCD processing
in MVT JOB MANAGEMENT

in LINKAGE EDITOR (F)
29 GY33-8009

36 GY28-6659

Scatter extent list
in MVT SUPERVISOR
format of
Scatter extent list format
in INITIAL PROGRAM LOADER AND NIP
Scatter format attribute (SCTR)
in LINKAGE EDITOR (F)
and grouping control sections
in processing example
module characteristics
Scatter loading
in LINKAGE EDITOR (F)
Sca tter table
in LINKAGE EDITOR (F)
format
introduction to
production of
Scatter/translation record
in INITIAL PROGRAM LOADER AND NIP
format
locating
reading
in LINKAGE EDITOR (F)
format
function
introduction to
written on SYSLMOD
in LOADER
format of
in MVT SUPERVISOR
format of

SCARMODE - Scissoring

36 GY27-7128
36 GY28-6660
36 GY28-6660

Scissoring examples
in GRAPHIC SUBRTN. PACKAGE
Scissoring limits
in GRAPHIC SUBRTN. PACKAGE
Scissori ng- routine
in GRAPHIC SUBRTN. PACKAGE

30 GY28-6604
36 GY27-7159

30 GY28-6618
36 GY28-6774
30 GY27-7237
30 GY27-7237
GY27-7228
36 GY28-6613
25 GY27-7152
25 GY27-7152
25 GY27-7152

~

sa -

404

SDNBR

SCK
---in GRAPHICS ACCESS METHOD
SCNCK1
---rn-TSO COMMAND PROC VOL6-TERMINAL

in Unify
30 GY27-7113
SCRSIZE keyword para~eter
in TSO COMMAND PROC VOL6-TERMINAL

36 GY28-6776

36 GY28-6776
SCT

SCNCK2
---rn-TSO COMMAND PROC VOL6-TERMINAL

36 GY28-6776

SCNNLVLS, field in WORKAREA
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

Scope
in
scope
in
Scope
in

Handling Stack
ALGOL (F) COMPILER
26 GY33-8000
of Operation (MCH)
MACHINE-CHECK HANDLER, s360 M65 31 GY27-7155
Table
ALGOL (F) COMPILER
26 GY33-8000

SCOUNT
---rn-COBOL-To-PLl1 LCP

29 GY33-7007

SCPPAD (symbolic name of subcOllUlland entry
point table)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
field description in test cOllUllUnication
table
as used by Initialization (Table 5,
function 4)
as used in indexing locations in the
BLDL table
SCPP4K (field in test communication table)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description of
SCRATCH
in TSO COMMAND PROC VOL2-DELETE
Scratch a data set
in TSO COMMAND PROC VOL6-SUBMIT
SCRATCH macro instruction
in CONTROL PROGRAM WITH MFT
in DIRECT ACCESS DEVICE SPACE MGT.
Scratch routine
in CATALOG MANAGEMENT
in DIRECT ACCESS DEVICE SPACE MGT.
in TSO CATALOG MANAGEMENT
Scratch storage
in PLII (F) COMPILER
control
released
text
Scratch VTOC request
ip. UTILITIES
Scratching data sets
in MVT JOB MANAGEMENT
Screen boundaries
in GRAPHICS PROBLEM ORIENTED RTNS.
SCREEN macro expansion linkage
in TELECOMMUNICATION ACCESS METHOD
SCREEN parameter list
in TELECQMMUNlCATION ACCESS METHOD
Screen rout1ne
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
SCRIPT roll
in FORTRAN IV (G) COMPILER
description
in Parse

in CONTROL PROGRAM WITH MFT
in JOB MANAGEMENT
in TELECOMMUNICATION ACCESS METHOD
SCT (Satellite Control Table)
in s/360 JOB PROCESSING 1130/2250
description of
format and contents of
SCT extension block
in JOB MANAGEMENT
SCTR
----in LINKAGE EDITOR

(F)

36 GY27-7128
36 GY28-6613
30 GY3O-2029
36 GY27-7166

36 GY28-6613
31 GY28-6667

SCU (storage control unit)
indicators
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
in LINKAGE EDITOR (F)
in LOADER
SD Dictionary Entries
in COBOL (F)
SD entry, processing
in COBOL-TO-PL/1 LCP
SD record
in COBOL-TO-PL/1 LCP
SD record, processing
in COBOL-TO-PL/1 LCP
SD-Text
in COBOL (F)
definition

31 GY28-6667
31 GY28-6714
24 GY28-6382
29 GY33-7007
29 GY33-7007
29 GY33-7007
24 GY28-6382

36 GY28-6772
36 GY28-6776

SDADRKEY
in COBOL-TQ-PLl1 LCP

36 GY27-7128
30 GY28-6607

---rn GRAPHIC

30 GY28-6606
30 GY28-6607
36 GY28-6745

---rn GRAPHIC

29 GY28-6800

---rn ALGOL-TQ-PLl1

32 GY28-6614

SDIOPARM, field in commo~
in TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6775
SDIOPARM (parameters for IEEVSDIO)
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
description
in IOPARML
operation
used in IEEVSDIO

29 GY33-7007

SDATL

SUBRTN. PACKAGE

25 GY27-7152

SUBRTN. PACKAGE

25 GY27-7152

SDATM
SDCID

36 GY28-6660

LCP

29 GY33-7006

30 GY27-7110
30 GY30-2029
30 GY30-2029

SDIORC, field in common
---rn-TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

SDKffi COBOL-TQ-PLl1 LCP

29 GY33-7007

SDKEYADR
in COBOL-TQ-PLl1 LCP

29 GY33-7007

SDKEYREC
in COBOL-TQ-PLl1 LCP

29 GY33-7007

SDLENGTH
in COBOL-TQ-PL/1 LCP

29 GY33-7007

30 GY30-2029

25 GY28-6638
SDNBR

---rn COBOL-TQ-PLl1

LCP

29 GY33-7007

405
SDNBRADR
in COBOL-TO-PL/l LCP

29 GY33-7007

SDNBRREC
in COBOL-TO-PL/l LCP

29 GY33-7007

SDPRTl
---rn-COBOL-To-PL/l LCP

29 GY33-7007

SDPTR
in COBOL-TO-PL/l LCP
SDPTR2
in COBOL-TO-PL/l LCP
SDPTR4
in COBOL-To-PL/l LCP

29 GY33-7007
29 GY33-7007
29 GY33-7007

SDNBRADR - Second
for password
for procedure name
for userid
Searching the catalog
in CATALOG MANAGEMENT
in TSO CATALOG MANAGEMENT

30 GY28-6606
36 GY28-6745

SECDEV switch
---rn-ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

SECFLD
---rn-COBOL-TO-PL/l LCP

29 GY33-1007

SECLOADA (IGG0552W)
in FOR~RAN IV (G) COMPILER

25 GY28-6638

SECLST
---rn-ONLINE TEST EXECUTIVE PROGRAM
in glossary

31 GY2B-6651

SDR (statistics data recorder) routine
---in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
SDR module-IFCEREPO (165)
in UTILITIES
32 GY28-6614

~COBOL-TO-PL/l LCP

29 GY33-7007

SDRECKEY
in COBOL-TO-PL/l LCP

29 GY33-7007

SECNDENT in COMFL
in PL/I SYNTAX CHECKER PLM

29 GY33-B009

SDSCN routine
in COBOL (F)

24 GY28-6382

SECNOCHK
in TSO COMMAND PROC VOL6-TERMINAL

36 GY2B-6776

SDT
in CONTROL PROGRAM WITH MFT

36 GY27-7128

SDT:h:XT routine
---rn-COBOL (F)

24 GY28-6382

SDV (String Dope Vector) usage
in PL/I SUBROUTINE LIBRARY
SDV discussion
in PL/I SUBROUTINE LIBRARY

29 GY28-6801
29 GY28-6801

search
in TSO COMAND PROC VOL2-CNCL/STATUS36 GY28-6712
for cancel
for status
queue
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6714
for a subcommand list. indicator
keyword list
SYS1.HELP data set
SEARCH-IEKRS
in FORTRAN IV (H) COMPILER
25 GY28-6642
Search limit
in SEQUENTIAL ACCESS METHODS
30 GY28-6604
Search of output queues
in TSO COMMAND PROC VOL5-0UTPUT
36 GY28-6775
Search-previous auxiliary storage
addressing
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
SEARCH routine
in COBOL (F)
24 GY28-6382
Search routines
in REMOTE JOB ENTRY
36 GY30-2005
general search routine
JOB search routine
search BRDCST and MSG slot directories
routine
terminal directory search routine
user directory search routine
SEARCH subroutine of IKAPSMBO
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
Search word comparator
in PLiI SUBROUTINE LIBRARY
29 GY28-6801
Searching
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771
for account number

SECNBR

Second CPU Recovery Management System
Interface routine
in MVT SUPERVISOR
description of
entry point name of
module name for
Second errors
in MACHINE-CHECK HANDLER. M135/145
in MACHINE-CHECK HANDLER. M155/165
Second file statements
in PL/I (F) COMPILER
ADV
BVEXP
dictionary references
format
IDV

36 GY2B-6659

30 GY27-1237
30 GY27-7198
29 GY2B-6BOO

MTF

PEXP
Second Level Directory. format
in PL/I (F) COMPILER
Second level I/O error messages
in TSO COMMAND PROC VOL1-SUBRTNS
Second level markers
in PL/I (F) COMPILER
EXCLUSIVE
removed from internal characrer
codes
Second level message
in TSO COMMAND PROC VOL4-LISTBC
in TSO COMMAND PROC VOL5-0PERATOR
address of
segment
segmen t block
in TSO COMMAND PROC VOL6-TERMINAL
in TSO COMMAND PROC VOL6-WHEN/END
in TSO COMMAND PROCESSOR VOL3-EDIT
definition
handling
Second level messages
in TSO COMMAND PROC VOL2-ALLOCATE
in TSO COMMAND PROC VOL2-DELETE
in TSO COMMAND PROC VOL4-LISTALC
in TSO COMMAND PROCESSOR VOL2-CALL
in TSO COMMAND PROCESSOR VOL4-EXEC
Second pass processing (IEWLMSCD)
in LINKAGE EDITOR (F)
description of

29

GY~B-6BOO

36 GY2B-6771
29 GY2B-6BOO

36 GY2B-6774
36 GY2B-6775

36 GY2B-6776
36 GY2B-6776
36 GY2B-6773

36
36
36
36
36

GY2B-6772
GY2B-6772
GY2B-6774
GY2B-6772
GY2B-6774

31 GY2B-6667

5

406

second - SEGLD

Second pass processing (IEWLMSCD)
in LINKAGE EDITOR (F)
31 GY28-6667
description of
L--------------------------------------(continued)
charts
synopsis
operation diagrams
objectives
overview
second pass RLD input buffer
in LINKAGE EDITOR (F)
31 GY28-6667
reading RLD records into
use in relocating address
constants
Second pass RLD output buffer
in LINKAGE EDITOR (F)
31 GY28-6667
entering RLD items in
use in relocating address constants
second pass text buffer, reading text
records into
in LINKAGE EDITOR (F)
31 GY28-6667
Second pass text control block format
in LINKAGE EDITOR (F)
31 GY28-6667
initialization (IEWLMREL)
Second pass text control table, making an
entry in
in LINKAGE EDITOR (F)
31 GY28-6667
Second processing phase
in UPDATE ANALYSIS PROGRAM
36 GY28-7106
ShCONDARY (keyword attribute)
in PLII SYNTAX CHECKER PLM
29 GY33-8009
Secondary allocation quantity
in CATALOG MANAGEMENT
30 GY28-6606
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
for Extend processing
in TSO CATALOG MANAGEMENT
36 GY28-6745
Secondary Base Locators
in COBOL (F)
24 GY28-6382
secondary command name
in TSO COMMAND PROC VOL6-WHEN/END 36 GY28-6776
Secondary communications vector table
in MVT SUPERVISOR
36 GY28-6659
format of
Secondary destination
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
secondary device
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
Secondary entry point
in FORTRAN IV (H) COMPILER
25 GY28-6642
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771
in IKJEFA40
Secondary input processing
in LOADER
31 GY28-6714
description of
routines
Secondary message index
in TSO COMMAND PROC VOL6-WHEN/END 36 GY2B-6776
Secondary space quantity
in TSO COMMAND PROC VOL2-DELETE
36 GY2B-6772
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY2B-6774
Secondary space quantity., field in DAPB08
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
SECONDS keyword
in TSO COMMAND PROC VOL6-TERMINAL 36 GY2B-6776
number
parameter
SECRUN switch
---rn-ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

SECSNO
---rn-TSO COMMAND PROC VOL6-TERMINAL
field name in PDL

36 GY28-6776

in COBOL-TQ-PL/1 LCP

29 GY33-7007

SECS1
in TSO COMMAND PROC VOL6-ThRMINAL
field name in PDL

36 GY28-6776

SECS2
---rn
TSO COMMAND PROC
field name in PDL

36 GY28-6776

VOL6-TbRMINAL

SECTICUR
in COBOL-TO-PL/l LCP
section, test
in ONLINE TEST EXECUTIVE PROGRAM
Section control table
in ONLINE TEST EXECUTIVE PROGRAM
Section definition
in TESTRAN
Section definition (SD)
in LINKAGE EDITOR (F)
definition
non-resolution processing
resolution processing
in LOADER
introduction to
processing an SD entry
symbol resolution for SD entry
Section table
in TCAM SERVICEABILITY AIDS
sections counter
in ONLINE TEST EXECUTIVE PROGRAM
how it works
in operation diagram
Sections used counter
in ONLINE TEST EXECUTIVE PROGRAM
how it works
in operation diagram

29 GY33-7007
37 GY2B-6651
37 GY28-6651
37 GY2B-6611
31 GY2B-6667

31 GY2B-6714

30 GY30-2027
37 GY28-6651

37 GY2B-6651

Sector addition
---rn-MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
Sector deletion
in MACHINE-CHECK HANDLER, .00135/145 30 GY27-7237
Sectors
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
SECTUSE
in ONLINE TEST EXECUTIVE PROGRAM

37 GY2B-6651

security checking
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY2B-6607
SECXXXX, fields in SECEXPAR
in TSO COMMAND PROC VOL5-0UTPUT
SEC3
---rn TSO COMMAND PROC VOL6-TERMINAL
field name in PDL

36 GY28-6775
36 GY28-6776

Seek addresses in QSAM Update mode
in INPUT/OUTPUT SUPERVISOR

30 GY2B-6616

SEEK2321 switch
in ONLINE TEST EXECUTIVE PROGRAM

37 GY2B-6651

SEGB1PTR, field in EXITWORK
in TSO COMMAND PROC VOL5-0PERATOR

36 GY2B-6775

SEGB2PTR, field in EXITWORK
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

SEGLD (overlay supervision)
in MFT SUPERVISOR
36 GY27-7236
SEGLD macro instruction
in MVT SUPERVISOR
36 GY28-6659
linkage to the Overlay Supervisor for

407
SEGLD Processor routine
in MVT SUPERVISOR
description of
entry point name of
flowchart of
module name for
synopsis of

36 GY28-6659

SEGTAB
-rrlLINKAGE EDITOR (F)
in MVT SUPERVISOR

Self

31 GY28-6667
36 GY28-6659

SEGTAl

~LINKAGE EDITOR (F)

SEGLGTH
in LINKAGE EDITOR (F)

31 GY28-6667

SEGLIST
in TSO COMMAND PROC VOL6-PROFILE

36 GY28-6776

SEGMAL
-rrlFORTRAN IV (E)
construction of
format of
use of

SEGLD -

SEGWT
in
SEGWT
in

31 GY28-6667

(overlay supervision)
MFT SUPERVISOR
36 GY27-7236
macro instruction
MVT SUPERVISOR
36 GY28-6659
linkage to the Overlay Supervisor for

SEGxxxx fields in PUTLBUF
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
25 GY28-6601

segment
in CRJE PLM
36 GY30-2011
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
segment block, first level message
in TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6775
segment block handling
in TSO COMMAND PROC VOL5-LISTCAT
36 GY28-6775
diagrams of
segment count fields
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
segment Descriptor Word (SDW)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
in INPUT/OUTPUT SUPERVISOR
30 GY28~6616
Segment length table (SEGLGTH)
in LINKAGE EDITOR (F)
31 GY28-6667
format
introduction to
processing
Segment path table (SEGTAl)
in LINKAGE EDITOR (F)
31 GY28-6667
in entry table size determination
making an entry in
processing
purpose
scanning by common path routine
use in entry table creation
Segment pointer
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
Segment relocation constant (SRC)
in LINKAGE EDITOR (F)
31 GY28-6667
definition
introduction to
Segment table
in MFT SUPERVISOR
36 GY27-7236
format
in MVT SUPERVISOR
36 GY28-6659
format of
segment table (SEGTAB)
in LINKAGE EDITOR (F)
31 GY28-6667
determining the size of
format
function
introduction to
PC-delete entry for
production of
Segmented output message buffer (TIMESBUF)
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
contents of
use of
Segments
in GRAPHIC SUBRTN. PACKAGE
25 GY27-7152
SEGMENT1, field in EXITWORK
in TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6775
SEGMENT2, field in EXITWORK
in TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6775

SEG1
in COBOL (E)

24 GY24-5009

SEG2
-----rn COBOL (E)

24 GY24-5009

SEG3
in COBOL (E)

24 GY24-5009

SEG6
----"In COBOL (E)

24 GY24-5009

SEIZE
in COBOL-TO-PL/1 LCP

29 GY33-7007

SELCTR counter

~COBOL (F)

Select Appendage routine (IITOSDSA)
in EMULATOR FOR 7090/7094/709411
description
flowchart
Select-exclude table-IEBCOPY
in UTILITIES
Select Frame Builder (SGSLC),
description of
in S/360 JOB PROCESSING 1130/2250
select instruction simulation
in EMULATOR FOR 7090/7094/709411
select record, definition of
in 8/360 JOB PROCESSING 1130/2250
SELECT sentence
in COBOL (F)
Selected options
in TELECOMMUNICATION ACCESS METHOD
application program processing
checkpoint/restart
cross reference table
error recovery procedures
line queuing
logging
message queuing
operator control
subtask trace
TCAM as a startable procedure
TCAM in a multiprocessing
environment
time sharing
Selection
in TELECOMMUNICATION ACCESS METHOD
Selective retry
in INPUT/OUTPUT SUPERVISOR
Selective task termination
in MACHINE-CHECK HANDLER, M135/145
Selector channel, availability
in INPUT/OUTPUT SUPERVISOR
Self-format blocks, writing of
in SEQUENTIAL ACCESS METHODS

24 GY28-6382

35 GY27-7187

32 GY28-6614
36 GY27-7166
35 GY27-7187
36 GY27-7166
24 GY28-6382
30 GY30-2029

30 GY30-2029
30 GY28-6616
30 GY27-7237
30 GY28-6616
30 GY28-6604

408

se1f - sequences

self-format channel program
in SEQUENTIAL ACCESS METHODS
SELL statement
---rn PL/I (F) COMPILER
SELL statements, scan in pseudo-code
phase
in PL/I (F) COMPILER
SELL triples, in pseudo-code phase
in PL/I (F) COMPILER

30 GY28-6604
29 GY28-6800

Sense bit

29 GY28-6800
29 GY28-6800

SELPICT
in COBOL-TO-PL/1 LCP

29 GY33-7007

SELSCN routine
COBOL (F)

24 GY28-6382

--rn-

Semicolon
in ALGOL-To-PL/1 LCP
in PL/I SYNTAX CHECKER PLM
; (60-character set)
,. (48-character set)
Semicolon Table
in ALGOL (F) COMPILER
SEND command, usage of
--:Ln TSO COMMAND PROC VOL1-BROADCAST
SEND command format
in TSO COMMAND PROCESSOR VOL6-SEND
SEND command processor
in CRJE PLM
entry point code
flowchart
messages requested
microfiche directory
module description
register usage
SEND list (IDUSRID)
in TSO COMMAND PROCESSOR VOL6-SEND
SEND processing summary
in TSO COMMAND PROCESSOR VOL6-SEND
Send scheduler
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
Send scheduler for leased lines and
no TSO
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
send scheduler routine
in QUEUED TELECOMM. ACCESS METHOD
chart
Send scheduler with no TSO
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
Send scheduling subtask
in QUEUED TELECOMM. ACCESS METHOD

SENDPDL (parameter descriptor list)
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
description
use

29 GY33-7006
29 GY33-8009

26 GY33-8000
36 GY28-6771
36 GY28-6776
36 GY30-2011

36 GY28-6776
36 GY28-6776
30 GY30-2029

30 GY30-2029

30 GY30-2002
30 GY30-2029

30 GY30-2002

Sending
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Sending operational flow
in QUEUED TELECOMM .• ACCESS METHOD 30 GY30-2002

---rn
ONLINE TEST EXECUTIVE
Sense bit settings

PROGRAM

37 GY28-6651

in INPUT/OUTPUT SUPERVISOR
for device failure
in UCB
sense routines
in EMULATOR FOR 7090/7094/709411
Sense subroutine
in INPUT/OUTPUT SUPERVISOR
flowcharts of
wi th CCH at SYSGEN

30 GY28-6616

35 GY27-7187
30 GY28- 6616

Separation, channel
in JOB MANAGEMENT
36 GY28-6613
separation, unit
in JOB MANAGEMENT
36 GY28-6613
Separation requests
in MVT JOB MANAGEMENT
36 GY28-6660
Separation strikeout pattern, storage
requirements of
in JOB MANAGEMENT
36 GY28-6613
Separation strikeout routine
in JOB MANAGEMENT
36 GY28-6613
SEQERR counter
in COBOL (F)

24 GY28-6382

SEQFLD
in COBOL-TO-PL/1 LCP

29 GY33-7007

Sequence
in SORT/MERGE
ascending
counters
descending
dummy
level numbers
sequence distribution
in SORT/MERGE
modules used for
sequence-in routine
in QUEUED TELECOMM. ACCESS METHOD
chart
SEQUENCE macro expansion linkage
in TELECOMMUNICATION ACCESS METHOD
Sequence numbers
in FORTRAN IV (H) COMPILER
Sequence of control
in TSO COMMAND PROCESSOR VOLl-CHNG
Sequence of entries in catalog
in CATALOG MANAGEMENT
in TSO CATALOG MANAGEMENT
sequence of executed
modules
in MACHINE-CHECK HANDLER, M135/145
in MACHINE-CHECK HANDLER, M155/165
Sequence of execution
in TEST RAN
SEQUENCE opti on
in COBOL (F)
sequence-out routine
in QUEUED TELECOMM. ACCESS METHOD
chart
SEQUENCE parameter list
in TELECOMMUNICATION ACCESS METHOD
Sequences
in GRAPHIC SUBRTN. PACKAGE
creation of
structure of

33 GY28-6597

33 GY28- 6597
30 GY30-2002
30 GY30-2029
25 GY28-6642
36 GY28-6771
30 GY28- 6606
36 GY28-6745
30 GY27-7237
30 GY27-7198
37 GY28-6611
24 GY28-6382
30 GY3D-2002
30 GY30-2029
25 GY27-7152

409
SEQUENTIAL (keyword attribute)
29
in PL/I SYNTAX CHECKER PLM
attribute classification
in OPEN statement
Sequential access I/O data management
interface
in FORTRAN IV (E)
25
Sequential access methods
in INPUT/OUTPUT SUPERVISOR
30
Sequential access methods (SAM) routines
in INPUT/OUTPUT SUPERVISOR
30
effect of BLDLTAB
effect of RAM
introduction to
Sequential access methods executors
in INPUT/OUTPUT SUPERVISOR
30
Sequential access methods facilities
in INPUT/OUTPUT SUPERVISOR
30
Sequential data set
in TSO COMMAND FROC VOL2-DELETE
36
DELETE functions for
in UPDATE ANALYSIS PROGRAM
36
sequential data set, treatment of
in TSO COMMAND FROC VOL6-RENAME
36
Sequential Unit Block (SUB)
in EMULATOR FOR 7090/7094/709411
35
bit meanings
description
finding the address of
format
in 7074 EMULATE FOR M/165

GY33-S009

GY2S-6601
GY2S-6616
GY2S-6616

GY2S-6616
GY2S-6616
GY2S-6772
GY2S-7106
GY2S-6776
GY27-71S7

GY27-722S

SER
in INPUT/OUTPUT SUPERVISOR
30 GY2S-6616
SER/CCH interface, in module directory
ShR flag
in MVT SUPERVISOR
36 GY2S-6659
SER routines
in MVT SUPERVISOR
36 GY2S-6659
SEREP (System Environment Recording,
Editing and Printing program)
in MACHINE-CHECK HANDLER. S360 M65 31 GY27-7155
SEREP (system Environmental Records,
Edit, and Print)
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
serial Adder parity error
in MACHINE-CHECK HANDLER, S360 M65
Serial number, volume
in CATALOG MANAGEMENT
in TSO CATALOG MANAGEMENT
serializing the use of a resource
in MVT SUPERVISOR
Serially reusable
in TELECOMMUNICATION ACCESS METHOD
Serially reusable attribute (REUS)
in LINKAGE EDITOR (F)
Serially reusable modules
in CRJE PLM

31 GY27-7155
30 GY2S-6606
36 GY2S-6745
36 GY2S-6659
30 GY30-2029
31 GY2S-6667
36 GY30-2011

Serious error
in ALGOL (F) COMPILER

26 GY33-S000

SERR interface routine
---rn INPUT/OUTPUT SUPERVISOR

30 GY2S-6616

SERTEPRM
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY2S-6774
SERTEPRM, field in WORKAREA
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY2S-6776
SERTEPRM (service routines parameter list)
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY2S-6772
Service aids
in TCAM SERVICEABILITY AIDS

30 GY30-2027

SEQUENTIAL - Service

service aids flow
in TCAM SERVICEABILITY AIDS
30 GY3O-2027
Service aids modules
in TCAM SERVICEABILITY AIDS
30 GY3O-2027
deleting
loading
Service functions
in PL/I SYNTAX CHECKER PLM
29 GY33-S009
checking expressions (IKM133)
checking variables (IKM135)
skipping matching parentheses (IKM132)
testing constants (IKM134)
Service programs
in ASSEMBLER (F)
21 GY26-3700
Service routine parameter list
in TSO COMMAND PROCESSOR VOLi-ACCT 36 GY2S-6771
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY2S-6776
Service routine return code, pointer to
in TSO COMMAND PROC VOL6-WHENIEND 36 GY2S-6776
Service routines
in CRJE PLM
36 GY30-2011
in PL/I (F) COMPILER
29 GY2S-6S00
in TESTRAN
37 GY2S-6611
in TSO COMMAND PROC VOL1-BROADCAST 36 GY2S-6771
in TSO COMMAND PROC VOL1-DELETE
36 GY2S-6771
description of
parameter list pointer
parse
putline
in TSO COMMAND PROC VOL2-DELETE
36 GY2S-6772
CATALOG
CLOSE
IKJDAIR
IKJDFLT
IKJEHCIR
IKJEHDEL
IKJ PARS E
IKJPUTL
LOCATE
OPEN
SCRATCH
STOW
in TSO COMMAND PROC VOL4-LISTALC
36 GY2S-6774
STACK
STAX
in TSO COMMAND PROC VOL5-LISTDS
36 GY2S-6775
defini tions of
IKJEHDEF
PARSE
use of
in TSO COMMAND PROC VOL5-0PERATOR 36 GY2S-6775
in TSO COMMAND PROC VOL6-PROFILE
36 GY2S-6776
in TSO COMMAND PROC VOL6-PROTECT
36 GY2S-6776
in TSO COMMAND PROC VOL6-TERMINAL 36 GY2S-6776
in TSO COMMAND PROCESSOR VOL1-ACCT 36 GY2S-6771
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY2S-6771
usage
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY2S-6771
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY2S-6772
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY2S-6774
considierations
control block
description of
ECB
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY2S-6774
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY2S-6774
general information
relationship to IKJEFHOl
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY2S-6776
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY2S- 6776
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY2S-6776
Service routines, function
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY2S-6772
Service routines, TSO
in TSO COMMAND PROC VOL1-SUBRTNS
36 GY2S-6771
definitions of

115

410

service - SETPRT
service routines, used
in TSO COMMAND PROC VOL4-LISTBC
36 GY28-6774
description
function
illustrations
service routines parameter list (SER~EPRM)
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
Service routines used by central and remote
command processing routines
in REMOTE JOB ENTRY
36 GY30-2005
Service subroutines. in ACCOUNT command
processing
in TSO COMMAND PROC VOL1-SUBRTNS
36 GY28-6771
Serviceability aids
in LOADER
31 GY28-6714
SERO
-----Yn MFT SUPERVISOR
SERO routine
in MVT SUPERVISOR
description of
entry point names of
flowchart of
module names for
synopsis of
SER1
---rn MFT SUPERVISOR
SER1 routine
in MVT SUPERVISOR
description of
entry point name of
flowcharts of
module name for
synopsis of
Session
in CRJE PLM
initiation
management
termination
Session. terminal
in TSO COMMAND PROC VOL2-ALLOCATE
Session Controller (SGSCL)
in S/360 JOB PROCESSING 1130/2250
charts
description of
Session time
in TSO COMMAND PROCESSOR VOL6-TIME

36 GY27-7236
36 GY28-6659

36 GY27-7236
36 GY28-6659

36 GY30-2011

SET (keyword option)
in PLiI SYNTAX CHECKER PLM
in ALLOCATE statement
subroutine OFFS (IKM23)
in record I/O statements
SET command
in CONTROL PROGRAM WITH MFT
in JOB MANAGEMENT
in MVT JOB MANAGEMENT
execution of
internal generation of
master scheduler use of
scheduling of
TOD clock. setting by
use of
SET Command Processor (IIOC1SET)
in 7074 EMULATE FOR M/165
flowchart

SETAB/CTLTAB table-IEBCOPY
UTILITIES
SETAB table sorting
in UTILITIES

--rri

35 GY27-7187
37 GY28-6611
35 GY27-7187
37 GY28-6611
35 GY27-7187

37 GY28-6611
25 GY27-7152
30 GY28-6607
29 GY28-6801
32 GY28-6614
30 GY30-2002
36 GY28-6659

37 GY28-6611
32 GY28-6614
32 GY28- 6614

SETARE
---rn-ASSEMBLER (F)

21 GY26-3700

SETCON
---rn-CRJE PLM

36 GY30-2011

SETFAL
---rn-COBOL (E)

24 GY24-5009

SETFLAG. field in MARKSET
in TSO COMMAND PROCESSOR VOL1-ADD

36 GY28-6771

36 GY28-6772
36 GY27-7166

36 GY28-6776

SESxxx fields in TIMESBUF
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
nSet must completen function
in MVT SUPERVISOR
description of

function
MOD
Set Command routine (IITSET)
in EMULATOR FOR 7090/7094/709411
set counter routine
in TESTRAN
Set Density Instruction routine
(IITSELsD)
in EMULATOR FOR 7090/7094/709411
Set f lag routine
in TESTRAN
Set Load status routine (IITLBTLS)
in EMULATOR FOR 7090/7094/709411
description
flowchart
Set macro-instruction
in TESTRAN
Set mode order
in GRAPHIC SUBRTN. PACKAGE
set-must-complete option
in DIRECT ACCESS DEVICE SPACE MGT.
SET option
in PL/I SUBROUTINE LIBRARY
set option-IFCEREPO (165)
in UTILITIES
Set scheduler subtask
in QUEUED TELECOMM. ACCESS METHOD
Set Status routine
in MVT SUPERVISOR
description of
entry point name of
module name for
synopsis of
Set variable routine
in TESTRAN

36 GY28-6659

29 GY33-8009

36 GY27-7128
36 GY28-6613
36 GY28-6660

GY27-7228

SETL macro instruction
-----Yn INDEXED SEQUEN. ACCESS METHOD
exception codes set
SETL routine--scan mode
in INDEXED SEQUEN. ACCESS METHOD
description
flowchart
module
pOinters to
SETOF
in
SETOF
in

30 GY28-6618
30 GY28-6618

macro expansion linkage
TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
parameter list
TELECOMMUNICATION ACCESS METHOD 30 GY30-2029

SETOT1
in ASSEMBLER (F)

21 GY26-3700

SETOT2
in ASSEMBLER (F)

21 GY26-3700

SETPRT Executor
---rn-INPUT/OUTPUT SUPERVISOR

30 GY28-6616

411
SETQUAL
in COBOL-TO-PL/1 LCP
SETS
in PL/I (F) COl'.AND PROC VOL2-ALLOCATlo
Spacing information
in COBOL (F)

36 GY28-6771

25 GY28-6638
30 GY28-661b

36 GY28-6772
36 GY28-6772
36 GY28-6774
36 GY28-6774
36 GY28-6772

36 GY28-6772
36 GY28-6771
36 GY28-6613
36 GY28-6772
24 GY28-6382

SPACPARM
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771
data area
in directory
SPACPARM (allocation/deallocation parameter
block)
in TSO COMMAND PROC VOL1-SUBRTNS
36 GY28-6771
fields in
input to IKJEFA53
input to IKJEFA54
subfield displacements of
SPACPTR, field in COMMON
in TSO COMMAND PROCESSOR VOL1-ADD

____________

~4=17

Space - Special

description
flowchart
Backspace Record (EMBSR)
description
flowchart
Buffer Pointer (EMPTR)
description
flowchart
Check (E.."'lCRECK)
description
flowchart
Entry (IITEPTCS)
descript.ion
flowchart
Force Out Buffer (EMFORC~)
description
flowchart
Read (EMREAD)
description
flowchart
Rewind (EMREW)
description
flowchart
Write (ENPUT)
description
flowchart
Write End-of-File (EMWEF)
description
flowchart
Spanned Variable-length record format
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
arrangement of records
characteristics
control fields
Spanned variable-length records,
in 7074 EMULATE FOR ~/165
GY27-7228
SPAR macro instruction
---rn GRAPHICS ACCESS METHOD

30 GY27-7113

SPAUTOPT macro instruction,
processing for
in TSO CONTROL PROGRAM

36 GY28-7199

SPDTA
in FOR'l'RAN IV-TO-PL/l LCP

29 GY33-7000

SPEC
in GRAPHIC SUBRTN. PACKAGE

25 GY27-7152

36 GY28-6771

SPACxxxx, field in SPACPARM
in TSO COMMAND PROCESSOR VOL1-ADD

36 GY28-6771

span
in FORTRAN IV (H) COMPILER

25 GY28-6642

Spanned data sets routine
in MVT JOB MANAGEMENT
36
Spanned record processing
in SEQUENTIAL ACCESS METHODS
30
by ASI routine
control blocks for
with dynamic buffering
by open executor
by self-format programs
spanned records
in INPUT/Om'PUT SUPERVISOR
30
Get routines
Put routines
in SORT/MERGE
33
block/deblock modules
merging technique
Spanned Variable-Length Format routines
in EMULATOR FOR 7090/7094/709411
35
Backspace File (EMBSF)

GY28-6660
GY28-6604

GY28-6616
GY28-6597

GY27-7187

Special A-Text Elements
in COBOL (F)
Procedure A-Text Formats
Special argument text
in FORTRAN IV (H) COMPILER
Special characteristics table
in TCAM SERVICEABILIT'Y AIDS
Special characters
in ALGOL-TQ-PL/l LCP
in PL/I SYNTAX CHECKER PLM
special characters table (SCT)
in TELECOMMUNICATION ACCESS METHOD
Special Edit Routine (IKAPSPD)
in S/360 JOB PROCESSING 1130/2250
chart
description of
Special Edit Routine (IKASPD)
in GRAPHIC JOB PROCESSOR SUPPORT
chart
description of
inserting intermediate text
Special event control block
(ECB)
in GRAPHICS ACCESS METHOD
Special event processing
in LINKAGE EDITOR (F)

24 GY28-6382
25 GY28-6642
30 GY30- 2027
29 GY33-7006
29 GY33- 8009
30 GY30- 2029
36 GY27-7166

36 GY27-7159

30 GY27-7113
31 GY28-6667

m

418

special - SPLRA

Special feature operation codes, not
emulated
in EMULATOR FOR 7090/7094/709411
Special message handling functions
in TELECOMMUNICATION ACCESS METHOD
cancel message
hold
initiate
lock
SPECIAL-NAMES
in COBOL (F)
SPECIAL-NAMES paragraph, processing
in COBOL-TO-PL/1 LCP
Special-names record
in COBOL-To-PL/1 LCP
Special operating system modules
in GRAPHIC JOB PROCESSOR SUPPORT
description of
function of
in S/360 JOB PROCESSING 1130/2250
description of
flowcharts
function of
Microfiche Directory
Special queuing considerations
in TELECOMMUNICATION ACCESS METHOD
Special rolls
in FORTRAN IV (G) COHPILER
Special text
in FORTRAN IV (8) COMPILER
Special Use Bits
in ALGOL (F) COMPIL~R
Sl'ECIF
----rIlALGOL-To-PL/1 LCP

35 GY27-7187
30 GY30-2029

36 GY28-7199
30 GY30-2027

SPEOT routine
in MVT SUPERVISOR

36 GY28-6659

29 GY33-7007

SPE1
in ALGOL-TO-PL/1 LCP

29 GY33-7006

29 GY33-7007
36 GY27-7159
36 GY27-7166

30 GY30-2029
25 GY28-6638
25 GY28-6642
26 GY33-8000
29 GY33-7006

DO

PICTURE
Specification interrupt
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Specification statement processing routines
in FORTRAN IV-TO-PL/1 LCP
29 GY33-7000
specification statements
in FORTRAN IV (G) COMPILER
25 GY28-6638
Specification tables
in FORTRAN IV-TO-PL/1 LCP
29 GY33-7000
Specifications, data
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Specifications, linkage
in PL/I SUBROUTINE LIBRARY
29 GY28-6801

Specifier
in ALGOL-TO-PL/1 LCP

36 GY27-7166

24 GY28-6382

specification
in ALGOL (F) COMPILER
26 GY33-8000
entry in Identifier Table
representation in intermediate source
text
allocation of object time storage field
internal names of specified identifiers
replacement of identifier by internal
name
in PL/I SYNTAX CHECKER PLM
29 GY33-8009

Specificator
in ALGOL (F) COI"lPILER

in S/360 JOB PROCESSING 1130/2250
chart
description of
message module
Specify terminal status
in TSO CONTROL PROGRAM
Specifying on-line testing
in TeAM SERVICEABILITY AIDS

26 GY33-8000
29 GY33-7006

specify Attention routine
in GRAPHICS ACCESS METHOD
30 GY27-7113
Specify Job Step Processor (IKAPSPEO)
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
chart
description of
extract record
Specify Job Step Processor
(IKAPSPEO)

SPF (storage Protect Feature) Analysis module
in MACHINE-CHECK HANDLER, ~135/145 30 GY27-7237
stand-alone methods (SHUT
routine)
in MACHINE-CHECK HANDLER, fu135/145 30 GY27-7237
SPF (Storage Protect Feature)
key
SPF key
in MACHINE-CHECK HANDLER, ~135/145 30 GY27-7237
SPIE
in

~~T SUPERVISOR
entry point
flowchart
functional description
module description
module synopsis
SPIE macro
in ALGOL (F) COMPILER
SPIE roacro (multitasking)
in PL/I SUBROUTINE LIBRARY
S1'IE macro-instruction
in FORTRAN IV (E)
object-time use of
SPIE routine
in MVT SUPERVISOR
description of
entry point name(s) of
flowchart of
module name for
synopsis of

SPIL
---rn CONTROL PROGRAM WITH MFT
Spill point, calCUlation of
in PL/I CF) COMPILER
Spill register
in FORTRAN IV (H) COMPILER
Spilling, auxiliary storage
in PL/I CF) COMPILER
Spilling directory entries-IEBCOPY
in UTILITIES
SPL
in CRJE PLM
SPL (Start Parameter List)
in S/360 JOB PROCESSING 1130/2250
defini tion of
format of

36 GY27-7236

26 GY33-8000
29 GY28-6801
25 GY28- 6601
36 GY28-6659

36 GY27-7128
29 GY28-6800
25 GY28-6642
29 GY28-6800
32 GY28-6614
36 GY30-2011
36 GY27-7166

Split-cylinder data sets
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
allocation
extension
scratching
SPLRA-IEKRSL

---rn FORTRAN

IV (H) COMPILER

25 GY28-6642

419

SPLS - STACK

SPLS parameter (ABUUMP)
in MVT SUP~RVISOR

36. GY28-6659

SSI information
--in UPDATE ANALYSIS PROGRAM

36 GY28-7106

SPNTBL table
in COBOL (F)

24 GY28-6382

SSINST
in COBOL (E)

24 GY24-5009

29 GY33-7000

-rn:

SSTAT-IEKRSS
FORTRAN IV (H) COMPILER

25 GY28-6642

SPQE
in MVT SUPERVISOR

36 GY28-6659

- - i n ASSEMBLER (F)

---rn

SPRlSC PDE
TSO COMMAND PROCESSOR VOL6-RUN

36 GY28-6776

SPROG ARG ALLOCATION routine
FORTRAN IV (G) COMPILER
SPROG ARG roll
in FORTRAN IV (G) COMPILER

25 GY28-6638

SPPRO

-rn:

FORTRAN IV-To-PL/1 LCP

-rn:

SS1, SS2

25 GY28-6638

SPSUB

-rn:

FORTRAN IV-To-PL/1 LCP

29 GY33-7000

SP78xxxx fields in E01DATDF
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
in INITIAL PROGRAM LOADER AND NIP
in MVT SUPERVISOR
SQA (System Queue Area), control
blocks in
in TSO CONTROL PROGRAM
SQS parameter
in INITIAL PROGRAM LOADER AND NIP

36 GY28-6661
36 GY28-6659
36 GY28-7199
36 GY28-6661

SRC
in LINKAGE EDITOR (F)

31 GY28-6667

SRCHFLG, field in CFLAGS
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
SRCHIND, field in CTRLTAB
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
SRECB field in E01DATDF
TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774

-rn:

SRLIGN
in ASSEMBLER (F)
SRPARM
in TSO COMMAND PROC VOL5-0PERATOR
in exitwork
in work area
SRPRIZ-IEKQAA
in FORTRAN IV (H) COMPILER
SRTPRO
in COBOL-TO-PL/1 LCP
in CRJE PLM
SSA (Standard Save Area)
--in PL/I SUBROUTINE LIBRARY
SSA format
in PL/I SUBROUTINE LIBRARY

21 GY26-3700
36 GY28-6775

25 GY28-6642
29 GY33-7007
36 GY30-2011
29 GY28-6801
29 GY28-6801

SSCIS

-rn:

GRAPHIC SUBRTN. PACKAGE

SSCRPT routine
in COBOL (F)

25 GY27-7152

24 GY28-6382

STA FINAL routine
---in FORTRAN IV (G) COMPILER
STA GEN FINISH routine
in FORTRAN IV (G) COMPILER
STA GEN routine
in FORTRAN IV (G) COMPILER
STA INIT routine
in FORTRAN IV (G) COMPILER
STA LBL BOX
in FORTRAN IV (G) COMPILER
STA RUN TABLE
in FORTRAN IV (G) COMPILER
STA XLATE EXIT routine
in FORTRAN IV (G) COMPILER
STA XLATE routine
in FORTRAN IV (G) COMPILER
STACK
in COBOL-TO-PL/1 LCP
in TSO COMMAND PROC VOL6-WHEN/END
input
parameter list
service routine
in TSO COMMAND PROCESSOR VOL1-ACCT
service routine
in TSO COMMAND PROCESSOR VOL2-CALL
macro instruction
parameter list, pointer to
service routine, definition
in TSO COMMAND PROCESSOR VOL3-EDIT
definition
function
stack, input
in TSO COMMAND PROC VOL2-ALLOCATE
in TSO COMMAND PROC VOL5-LISTCAT
flushing
in TSO COMMAND PROCESSOR VOL4-HELP
Stack action
in PL/I (F) COMPILER
STACK macro instruction (IKJSTCK),
use of
in TSO CONTROL PROGRAM
Stack operator
in ALGOL (F) COMPILER
in PL/I (F) COMPILER
Stack parameter block
in TSO COMMAND PROC VOL5-0PERATOR
STACK Parameter Block (STPB)
in TSO TMP '& SERVICE ROUTINES
format
use
STACK parameter list
in TSO COMMAND PROCESSOR VOL6-RUN
in WORKARFA
stack purge routine
in MVT JOB MANAGEMENT
Stack purging
in MVT JOB MANAGEMENT
STACK service routine
in TSO COMMAND PROC VOL1-BROADCAST
definition
in TSO COMMAND PROC VOL1-SUBRTNS
definition
in TSO COMMAND PROC VOL2-DELETE

21 GY26-3700
25 GY28-6638
25 GY28-6638
25 GY28-6638
25 GY28-6638
25 GY28-6638
25 GY28-6638
25 GY28-6638
25 GY28-6638
29 GY33-7007
36 GY28-6776

36 GY28-6771
36 GY28-6772

36 GY28-6773

36 GY28-6772
36 GY28-6775
36 GY28-6774
29 GY28-6800
36 GY28-7199
26 GY33-8000
29 GY28-6800
36 GY28-6775
36 GY28-6770

36 GY28-6776
36 GY28-6660
36 GY28-6660
36 GY28-6771
36 GY28-6771
36 GY28-6772

II

STACl( -

420

STAESAVE

STACK service routine
I in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
L--------------------------------------(continued)
definition
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
definition
used for error termination
in TSO COMMAND PROC VOL6-PROFILE
36 GY28-6776
in TSO COMMAND PROC VOL6-PROTECT
36 GY28-6776
definition
in TSO COMMAND PROC VOL6-TERMINAL 36 GY28-6776
definition
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-677l
definition
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-677l
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-677l
definition
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
considerations
description
descriptor list
error handling
use of
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
definition
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
definition
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
in TSO TMP & SERVICE ROUTINES
36 GY28-6770
description
hierarchy
operation
parameters
register usage
return codes
STACK service routine (IKJSTCK)
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
definition
Stack storage required
in MVT JOB MANAGEMENT
36 GY28-6660
Stack weight
in PL/I (F) COMPILER
29 GY28-6800
Stacker phase
in PL/I (F) COMPILER
29 GY28-6800
Stackinq backspace record operations
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
STACKPRM, field in WORKAREA
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
STACKPTR, field in EXITPARM
in TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6775
Stacks
---rn-PL/I (F) COMPILER
29 GY28-6800
count
DO group
level
temporary description
STADDR
---rn-COBOL (E)
STAE
---rn EMULATOR FOR 7090/7094/709411
exit routine
macro
in MFT SUPERVISOR
control block
entry point
flowchart
functional description
module description
module synopsis
parameter list
retry routine
in MVT SUPERVISOR
macro instruction
Service routine

24 GY24-5009
35 GY27-7l87

description of
entry point name of
flowchart of
module name for
synopsis of
STAE, in IKJEFF68
in TSO COMMAND PROC VOL5-0UTPUT
STAE (specify task asynchronous exit)
in TSO COMMAND PROCESSOR VOL3-EDIT
definition
processing
STAE ABEND exit routine
in TSO COMMAND PROCESSOR VOL1-ACCT
STAE ABEND parameter list
in TSO COMMAND PROCESSOH VOL1-ACCT
STAE control block (SCB)
in MVT SUPERVISOR
format of
in TSO TMP & SERVICE ROUTINES
STAE environment
in TSO COMMAND PROC VOL5-0PERATOR
STAE exit routine
in PL/I SUBROUTINE LIBRARY
in TSO TMP & SERVICE ROUTINES
in command processor
in Terminal Monitor Program
STAE Exit routine, IKJEGSTA
in TSO COMMAND PROCESSOR VOL7-TEST
diagram of
flowchart of
module description of
text description of
STAE exit routine, use of
in TSO COMMAND PROC VOL1-SUBRTNS
STAE exit routine (IKJEFFll)
in TSO COMMAND PROC VOL6-SUBMIT
STAE exit routines
in TSO CONTROL PROGRAM
STAE exits
in TSO COMMAND PROC VOL2-ALLOCATE
in TSO COMMAND PROCESSOR VOL4-EXEC
in TSO COMMAND PROCESSOR VOL6-TIME
STAE facility
in MVT JOB MANAGEMENT
command scheduling, use of
master scheduling, use of
retry
STAE macro
in PL/I SUBROUTINE LIBRARY
STAE macro (multitasking)
in PL/I SUBROUTINE LIBRARY
STAE macro instruction
in TSO TMP & SERVICE ROPTINES
STAE macro usage
in TSO COMMAND PROCESSOR VOL4-EXEC
STAE processing
in TSO COMMAND PROCESSOR VOL1-LIST
in TSO COMMAND PROCESSOR VOL4-HELP
STAE system macro instruction
in ONLINE TEST EXECUTIVE PROGRAM
STAEAREA, field in EXITPARM
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775
36 GY28-6773

36 GY28-6771
36 GY28-6771
36 GY28-6659
36 GY28-6770
36 GY28-6775
29 GY28-680l
36 GY28-6770

36 GY28-6777

36 GY28-677l
36 GY28-6776
36 GY28-7199
36 GY28-6772
36 GY28-6774
36 GY28-6776
36 GY28-6660

29 GY28-6801
29 GY28-680l
36 GY28-6770
36 GY28-6774
36 GY28-6771
36 GY28-6774
37 GY28-6651
36 GY28-6775

36 GY27-7236
STAEPLl (STAE ABEND parameter list)
in TSO COMMAND PROCESSOR VOL1-ACCT 36 GY28-677l
fields in
initialization of
input to STAEXIN
pointer to
size of
36 GY28-6659
STAESAVE, field in EXITPARM
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

421
S'IAEWA
in TSO COMMAND PROC VOL5-0PERATOR
data area
in directory

36 GY2B-6775

STAEXIN (STAE ABEND exit routine)
in TSO COMMAND PROCESSOR VOL1-ACe'!' 36 GY2B-6771
basic functions
module residence
parameter lists for
Stage 1 Exit Effector
in ~~T SUPERVISOR
36
entry point
flowchart
functional description
module synopsis
in MVT SUPERVISOR
36
description of
entry point name(s) of
flowchart of
module name for
synopsis of
Stage 1 Open executors
in INPUT/OUTPUT SUPERVISOR
30
Stage 2 Exit Effector
in MFT SUPERVISOR
36
entry point
flowchart
functional description
module synopsis
in MVT SUPERVISOR
36
description of
entry point name(s) of
flowchart of
module name for
synopsis of
stage 2 exit effector routine
in INPUT/OUTPUT SUPERVISOR
30
Stage 2 Open executors
in INPUT/OUTPUT SUPERVISOR
30
stage 3 Exit Effector
~n MFT SUPERVISOR
36
entry point
flowchart
functional description
module synopsis
in MVT SUPERVISOR
36
description of
entry point name(s) of
flowchart of
module name for
synopsis of
Stage 3 exit effector routine
in INPUT/OUTPUT SUPERVISOR
30
Stage 3 Open executors
in INPUT/OUTPUT SUPERVISOR
30
Stages of generation (library)
in PL/I SUBROUTINE LIBRARY
29
Stages of open and close executors
in INDEXED SEQUEN. ACCESS METHOD
30
Stages of program
in TSO COMAND PROC VOL2-CNCL/STATUS36
STAI (subtask ABEND intercept)
in TSO COMMAND PROCESSOR VOL3-EDIT
definition
processing
STAI Control Block (SCB)
in TSO TMP & SERVICE ROUTINES
STAI exit routine
in TSO COMMAND PReC VOL4-LISTALC
in TSO COMMAND PROC VOL5-LISTCAT
. functions of
in TSO COMMAND PROC VOL5-LISTDS
in TSO COMMAND PROC VOL6-PROFILE

GY27-7236

GY2B-6659

STAEWA - Standard

in
in
in
in
in
in

TSO COMMAND PROC VOL6-T~RMINAL 36
TSO COMMAND PROCESSOR VOL1-LIST 36
TSO COMMAND PROCESSOR VOL6-SEND 36
TSO COMMAND PROCESSOR VOL7-TEST 36
TSO CONTROL PROGRAM
36
TSO TMP & SERVICE ROUTINES
36
in Terminal Monitor Program
STAI exit routine. use of
in TSO COMMAND PROC VOL1-SUBRTNS
36
STAI exits
in TSO COMMAND PROC VOL2-ALLOCATE 36
in TSO COMMAND PROCESSOR VOL4-EXEC 36
in TSO COMMAND PROCESSOR VOL6-TIME 36
STAI operand on ATTACH macro instruction
in TSO TMP & SERVICE ROUTINES
36
STAI processing
in TSO COMMAND PROCESSOR VOL1-LIST 36
in TSO COMMAND PROCESSOR VOL4-HELP 36
STALL-IEKGST
---rn
FORTRAN

IV (H) COMPILER
functions of

GY2B-6776
GY2B-677l
GY2B-6776
GY2B-6777
GY2B-7199
GY2B-6770
GY28-677l
GY28-6772
GY2B-6774
GY2B-6776
GY2B-6770
GY2B-6771
GY2B-6774

25 GY2B-6642

Stand alone ccw

GY2B-6616
GY27-7236

GY2B-6659

GY2B-6616
GY2B-6616
GY27-7236

GY2B-6659

GY2B-6616
GY2B-66l6
GY2B-6BOl
GY2B-661B
GY2B-6772

36 GY2B-6773

36 GY2B-6770
36 GY2B-6774
36 GY2B-6775
36 GY2B-6775
36 GY2B-6776

---rnfor
INPUT/OUTPUT SUPERVISOR
direct access
Stand-alone utility programs
in UTILITIES

30 GY28-6616
32 GY2B-66l4

Standard calling sequence
in PL/I SUBROUTINE LIBRARY
29 GY2B-6BOl
Standard files
in PL/I SUBROUTINE LIBRARY
29 GY2B-6BOl
SYSIN
SYSPRINT
Standard function
in ALGOL-TO-PL/l LCP
29 GY33-7006
standard input/output procedures
in ALGOL (F) COMPILER
26 GY33-BOOO
entries in Identifier Table
internal names
replacement of identifiers by internal
names
call (object code)
ESD records
INARRAY
INBARRAY
INBOOLEAN
ININTEGER
INREAL
INSYMBOL
INTARRAY
OUT ARRAY
OUTBARRAY
OUT BOOLEAN
OUTINTEGER
OUTREAL
OUTSTRING
OUTSYMBOL
OUTTARRAY
GET
PUT
SYSACT
standard mathematical functions
in ALGOL (F) COMPILER
26 GY33-BOOO
entries in Identifier Table
internal names
replacement of identifiers by internal
names
call (object code)
ESD records
ABS
ARCTAN
COS
ENTlER
EXP

m
..

Standard - Start

422

Standard mathematical functions
I in ALGOL (F) COMPILER
26 GY33-8000
L--------------------------------------(continued)
LENGTH
LN
SIGN
SIN
SQRT
Standard Name Data References
in COBOL (F)
24 GY28-6382
Procedure IC-Text format
Standard procedure-name
in COBOL-TO-PL/1 LCP
29 GY33-7007
Standard procedure-names
in COBOL-TO-PL/1 LCP
29 GY33-7007
Standard Record Control Field
in COBOL (E)
24 GY24-5009
Standard save area (SSA)
in PL/l SUBROUTINE LIBRARY
29 GY28-6801
Standard system action (other than
on-conditions)
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Standard tape label
in MVT JOB ~ANAGEMENT
36 GY28-6660
Standard text, phase 15 format of
in FORTRAN IV (H) COMPILER
25 GY28-6642
Star (*)
---rn PL/I SYNTAX CHECKER PLM
START
in
in
in
START
in
START
in
Start
in
START
in

29 GY33-8009

ASSEMBLER (F)
21 GY26-3700
COBOL (E)
24 GY24-5009
COBOL (F)
24 GY28-6382
ALLOCATION routine
FORTRAN IV (G) COMPILER
25 GY28-6638
BRDR command
TSO CONTROL PROGRAM
36 GY28-7199
cancel routine
TSO COMAND PROC VOL2-CNCL/STATUS36 GY28-6772
command
EMULATOR FOR 7090/7094/709411
35 GY27-7187
diagnostic use
receiving
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
for GFX
for GJP
parameters on the
process l.ng the
in JOB MANAGEMENT
36 GY28-6613
(blank)
RDR
WTR
in MVT JOB MANAGEMENT
36 GY28-6660
execution of
job step tasks in
scheduling of
system tasks in
task
use of
START command processing
in CONTROL PROGRAM WITH MFT
36 GY27-7128
differences between system tasks and
problem programs started from the
console
for an initiator
for a problem program
for a system task
START command processor
in CRJE PLM
36 GY30-2011
flowchart
format
function
microfiche directory
module description
register usage

START Command Processor (II OS TART)
in 7074 EMULATE FOR M/165
GY27-7228
function
MOD
Start Command routine (IITZIP)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
START COMPILER routine
in FORTRAN IV (G) COMPILER
25 GY28- 6638
Start descriptor table
in CONTROL PROGRAM WITH MFT
36 GY27-7128
Start descriptor table (SDT)
in MVT JOB MANAGEMENT
36 GY28-6660
START GEN routine
in FORTRAN IV (G) COMPILER
25 GY28-6638
START GFX command
S/360
JOB
PROCESSING
in
1130/2250 36 GY27-7166
START GJPnnn command
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
Start I/O
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
CAW
channel restart routine
condition codes
for direct access devices
described in ~odule directory
explained
interaction with I/O supervisor
(diagram)
mul tiprocessing
normal start (diagram)
post start I/O routine
register usage
diagram
with tape
restart (diagram)
RESTORE macro
restore routine
scheduled I/O
start I/O subroutine, in module
directory
SIO instruction
test I/O instruction
for tape devices
described in module directory
diagram
explanation
for unit record devices
described in module directory
explanation
volume verification routine, in module
directory
Start I/O appendage
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
Start I/O subroutine
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
interaction with I/O supervisor
(diagram)
with CCH at SYSGEN
Start line routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
librar¥
microfl.che directory
module description
register usage
Start line-stop line routine
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
chart
Start parameter list
in CRJE PLM
36 GY30-2011
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
Start Parameter List (SPL)
in s/360 JOB PROCESSING 1130/2250 36 GY27-7166
definition of
format of

423
START RDRCRJE
in CRJE PLM
36
START RDRCRJE, allocate, and Q manager
service routine
in CRJE PLM
36
START SGJPnnn command
in S/360 JOB PROCESSING 1130/2250 36
Start/stop channel check ERP module
in TELECOMMUNICATION ACCESS METHOD 30
cross reference table
flowchart
library
microfiche directory
module description
register usage
Start/stop ERP control module
in TELECOMMUNICATION ACCESS METHOD 30
cross reference table
flowchart
library
microfiche directory
module description
register usage
start/stop ERP module linkage
in TELECOMMUNICATION ACCESS METHOD 30
Start-Stop Remote Print
in TCAM SERVICEABILITY AIDS
30
entry
functions
start-stop Remote Print 1030
in TCAM SERVICEABILITY AIDS
30
entry
functions
Start-Stop Remote Print 1050 & 1060
in TCAM SERVICEABILITY AIDS
30
entry
functions
Start-Stop Remote Print 2260 & 2265
in TCAM SERVICEABILITY AIDS
30
entry
functions
Start-Stop Remote Print 2741
in TCAM SERVICEABILITY AIDS
30
entry
functions
START TS (operator command)
in TSO COMMAND PROCESSOR VOL7-TEST 36
START TSO command
in TSO CONTROL PROGRAM
36
Command Input Buffer
parameters
invalid or missing
processing of
rejection of
START TSTRACE command
in TSO CONTROL PROGRAM
36
START UNIFY routine
in FORTRAN IV (G) COMPILER
25
Start-up
in CRJE PLM
36
Start-up errors
in CRJE PLM
36
Start-up message routine
in TELECOMMUNICATION ACCESS METHOD 30
cross reference table
flowchart
library
microfiche directory
module description
register usage
STARTB
-rilASSEMBLER (F)
21
Starting GFX
in S/360 JOB PROCESSING 1130/2250 36
Starting SGJP in System/360
in s/360 JOB PROCESSING 1130/2250 36

GY30-2011
GY30-2011
GY27-7166
GY30-2029

GY30-2029

GY30-2029
GY30-2027

GY30-2027

GY30-2027

GY30-2027

ST~

- Statement

Starting SGJP in the subsystem
in s/360 JOB PROCESSING 1130/2250 36
Starting the Initial Processor
(IKDINPRO)
in S/360 JOB PROCESSING 1130/2250 36
STARTLIN macro expansion linkage
in TELECOMMUNICATION ACCESS METHOD 30
STARTMH
in TELECOMMUNICATION ACCESS METHOD 30
STARTMH macro expansion
in TCAM SERVICEABILITY AIDS
30
STARTMH QCB
in TELECOMMUNICATION ACCESS METHOD 30
STARTMH suhtask
in TELECOMMUNICATION ACCESS METHOD 30
cross reference table
flowchart
library
microfiche directory
module description
register usage
STARTMH subtask for TCAM-TSO mixed
in TELECOMMUNICATION ACCESS METHOD 30
cross reference table
flowchart
library
microfiche directory
module description
register usage
STARTP (pointer save area)
- r i lPL/I SYNTAX CHECKER PLM
29
STARTPTR (pointer to character string)
in PL/I SYNTAX CHECKER PLM
29
STARTREDEF
in COBOL-TO-PL/l LCP
29
STARTS
in COBOL (E)
24
Startup of the RJE system
in REMOTE JOB ENTRY
36
STAT
- i n PL/I SYNTAX CHECKER PLM

GY27-7166
GY27-7166
GY3O-2029
GY30-2029
GY30-2027
GY30-2029
GY30-2029

GY30-2029

GY33-8009
GY33-8009
GY33-7007
GY24-5009
GY30-2005

29 GY33- 8009

GY30-2027

GY28-6777
GY28-7199

STAT AUTO
in TSO COMANO PROC VOL2-CNCL/STATUS36 GY28-6772
STATAUTO switch
in TSO COMAND PROC VOL2-CNCL/STATUS36 GY28-6772
in switches
in operation
STATBEG (pointer to token string)
in PL/I SYNTAX CHECKER PLM

GY28-7199

Statement
in ALGOL-TO-PL/l LCP
assignment

29 GY33-8009
29 GY33-7006

CALL

GY28-6638

FOR
GO TO

GY30-2011
GY30-2011
GY30-2029

GY26-3700
GY27-7166
GY27-7166

IF
processing routines
in FORTRAN IV (H) COMPILER
functions
processing of
skeleton
number
chain reordering
as a definition
phase 15 format
phase 25 processing of
processing for XREF
in PL/I SYNTAX CHECKER PLM
assignment
classification of
debuqging hints for
delimiters

25 GY28-6642

29 GY33-8009

~

424

Statement - STATEOPREDEF
Statement

L--~~-:~~~-~:~~-:~~:~~~-:~~---------~~c~~~f~~~~f

keyword
scanning
type
Statement. continuation
36
in JOB MANAGEMENT
Statement. overriding
36
in JOB MANAGEMENT
Statement. span of storage block
in PL/I (F) COMPILER
29
Statement commit operator
25
in FORTRAN IV SYNTAX CHECKER PLM
Statement Context Matrix
in ALGOL (F) COMPILER
26
Statement delimiters, when removed
in PL/I (F) COMPILER
29
statement errors-IEBCOMPR
in UTILITIES
32
Statement function numbers
in FORTRAN IV (E)
25
assignment of
Statement functions
in FORTRAN IV (E)
25
compile-time processing
of
statement global commit
in FORTRAN IV SYNTAX CHECKER PLM
25
subscripting
statement global commit switch
in FORTRAN IV SYNTAX CHECKER PLM
25
Statement identifiers, dictionary code
in PL/I (F) COMPILER
29
Statement label code
in PL/I (F) COMPILER
29
Statement labels
in PL/I (F) COMPILER
29
in source text
inserted in dictionary
Statement number, when printed
in PL/I (F) COMPILER
29
Statement number/array table
in FORTRAN IV (H) COMPILER
25
block status field
dimension entry format
entry format
after XREF
after phases
Statement number definitions
in FORTRAN IV (E)
25
compile-time processing of
Statement numbering
in'PL/I (F) COMPILER
29
Statement numbers
in FORTRAN IV (E)
25
overflow table entries for
STATEMENT PROCESS routine
in FORTRAN IV (G) COMPILER
25
statement processing
in COBOL-To-PL/1 LCP
29
ALTER
arithmetic

READ

GY28-6613

GY28-6800
GY28-6831
GY33-8000
GY28-6800
GY28-6614

DOUBLE PRECISION
END
ENDFILE
EQ UI ""ALENCE
EXTERNAL
FIND
FUNCTION
GO TO
IF
INTEGER
PAUSE
REAL

GY28-6601
GY28-6601

GY28-6831
GY28-6831
GY28-6800
GY28-6800
GY28-6800

GY28-6800
GY28-6642

GY28-6601
GY28-6800
GY28-6601
GY28-6638
GY33-7007

CALL

RETURN
REWIND
sequential access
READ
sequential access
WRITE
STOP
SUBROUTINE
Statement processing, object-time
in FORTRAN IV (E)
BACKSPACE
DEFINE FILE
direct access READ
direct access WRITE
ENDFILE
FIND
FORMAT
PAUSE
REWIND
sequential access
READ
sequential access
WRITE
STOP
Statement processing routine
in JOB MANAGEMENT
Statement table
in COBOL-TO-PL/1 LCP
Statement tables
in COBOL-TO-PL/1 LCP
Statement types
in PL/I (F) COMPILER
Statement verification, record I/O
in PL/I SUBROUTINE LIBRARY
Statements
in PL/I (F) COMPILER
BEGIN-END
BUY
chains constructed 31
DO-END
identification of types
IF-THEN-ELSE
io1 tial dope vector
nested
ON
PROCEDURE-END
second file

25 GY28-6601

36 GY28-6613
29 GY33-7007
29 GY33-7007
29 GY28-6800
29 GY28-6801
29 GY28-6800

SELL

SIGNAL CHECK
structure assignment
terminated by compiler

READ

CALL

direct access
WRITE
DO

GY28-6613

CLOSE
ENTRY
GO TO
input/output
OPEN
PERFORM
REWRITE
Statement processing, compiler-time
in FORTRAN IV (E)
BACKSPACE

COMMON
CONTINUE
DEFINE FILl!:
DIMENSION
direct access

25 GY28-6601
STATEOFREDEF
in COBOL-TO-PL/1 LCP

29 GY33-7007

425
STATERED1:!F
in COBOL-TO-PLl1 LCP
STATIC (keyword attribute)
in PLiI SYNTAX CHECKER PLM
checking of
in INITIAL option 1
not in ENTRY attribute list
not in INITIAL option 2
STATIC found flag (STATICFL)
with AREA attribute
with string attributes
STATIC chain
in PL/I (F) COMPILER
external section scan
in structure processor
scan
with symbol table
Static data base pointer
in TSO COMMAND PROC VOL1-DELETE
Static defining
in PL/I (F) COMPILER
STATIC DSA
in PL/I (F) COMPILER
Static history
in TSO COMMAND PROC VOL6-SUBMIT
STATIC routine
in COBOL (F)
STATICFL
in PL/I SYNTAX CHECKER PLM

29 GY33-7007
29 GY33-8009

29 GY28-6800

36 GY28-6771
29 GY28-6800
29 GY28-6800
36 GY28-6776
24 GY28-6382
29 GY33-8009

station control block (SCB)
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Stations. remote
in TCAM SERVICEABILITY AIDS
30 GY30-2027
statistical data records. writing of
in UTILITIES
32 GY28-6614
Statistical data records-IFCEREPO (165)
in UTILITIES
32 GY28-6614
Statistics Collection routine
in TSO CONTROL PROGRAM

36 GY28-7199

STATSORT (work routine in IKMOOx)
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

STATSTAB (branching table in IKM03)
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

STATS6 in IKMO 3
-rrlPL/I SYNTAX CHECKER PLM
difficult algorithms
keyword checking
STATTN macro instruction
---rn-TSO COMMAND PROC VOL6-TERMINAL
STATTN macro instruction. processing
for
in TSO CONTROL PROGRAM
Status
---rn-FORTRAN IV (H) COMPILER
field in status mode word
information
mode word
of operands for code generation
in register assignment
in s/360-1130 DATA TMN. - FORTRAN
for last requested
operation
passing initalization
attempt status in
System/360
passing initialization
attempt status in 1130

29 GY33-8009

36 GY28-6776
36 GY28-7199
25 GY28-6642

25 GY27-7161

STATEREDEF - status

placing in user's variable
for System/360
placing in user's variable
for 1130
posting completion status
in GTCB
posting completion status
in GTCOM
STATUS
in TSO COMMAND PROC VOL4-LISTALC
36"GY28-6774
operand
processing
Status. in LOCINFOA
in TSO COMAND PROC VOL2-CNCLISTATUS36 GY28-6772
Status bits
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
Status byte
in PL/I (F) COMPILER
29 GY28-6800
Status byte. CPU
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
Status byte. in IKJWHEN
in TSO COMMAND PROC VOL6-WBEN/END 36 GY28-6776
Status check indicator
in TSO COMMAND PROC VOL1-DELETE
36 GY28-6771
Status check routine
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
chart
STATUS command processor
in CRJE PLM
36 GY30-2011
entry pOint code
flowhcart
messages requested
microfiche directory
module description
register usage
in REMOTE JOB ENTRY
36 GY30-2005
STATUS halfword
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Status indications
in PL/I (F) COMPILER
29 GY28-6800
Status indicators
in INDEXED SEQUEN. ACCESS METHOD
30 GY28-6618
buffers--load mode
DCB
DSCB
scan mode
Status information
in CRJE PLM
36 GY30-2011
Status information address
in UTILITIES
32 Gyt8-6614
Status information functions
in GRAPHIC SUBRTN. PACKAGE
25 GY27-7152
STATUS keyword
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
function
processing
Status line
in UPDATE ANALYSIS PROGRAM
36 GY28-7106
STATUS macro instruction
in MVT SUPERVISOR
36 GY28-6659
analysis of parameters
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
analysis of operands of
as used by Mainline
Status of data sets
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
STATUS parameter for MODE command
in MACHINE-CHECK HANDLER. M155/165 30 GY27-7198
Model 155
Model 165
Status slot
in PL/I (F) COMPILER
29 GY28-6800
dictioary block
text block
Status svc routines
in TSO CONTROL PROGRAM
36 GY28-7199

~

Status - STEQ=S____________________________________

~4~2~6

Status SVC routines
I in TSO CONTROL PROGRAM
36 GY28-7199
L--------------------------------------(continued)
general description
macro instructions and functions
performed
Main Control routine
SVC 94
status switch
in TSO COMAND PROC VOL2-CNCL/STATUs36 GY28-6772
in IKJEFF51
in IKJEFF52
Status table
in GRAPHIC SUBRTN. PACKAGE
25 GY27-7152
accessed
changing via SPEC
deleted
description
loaded
using
Status variable
in FORTRAN IV (G) COMPILER
25 GY28-6638
Status without operands
in TSO COMAND PROC VOL2-CNCL/STATUs36 GY28-6772
STATUSSW, in switches
in TSO COMANO PROC VOL2-CNCL/STATUS36 GY28-6772
STAUTOCP macro instruction,
processing for
in TSO CONTROL PROGRAM
STAUTOLN macro instruction,
processing for
in TSO CONTROL PROGRAM

36 GY28-7199

36 GY28-7199

___________________________________________________
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
issued by TMP
in TSO COMMAND PROCESSOR VOL6-S~ND 36 GY28-6776
issued by TMP
STAX service routine definition
in TSO COMMAND PROC VOL6-RENAME
36 GY28-6776
STAXLIST, in OUTCOMTB
in TSO COMMAND PROC VOL5-0UTPUT

GY28-6771
GY28-677l
GY28-6775
GY28-6772
GY28-6775
GY28-6775
GY28-7199
GY28-6770

GY28-6776
GY28-7199
GY28-677l
GY28-6771
GY28-6774
GY28-6776
GY28-6776
GY28-6776
GY28-6771
GY28-6771
GY28-6771
GY28-6772
GY28-6774

GY28-677~

STAXNPS (STAX attention parameter list)
in TSO COMMAND PROCESSOR VOLl-ACC'! 36 GY28-677l
fields in
initialization of
input to STAXXIN
pointer to
size of
STAXXIN (STAX attention exit routine)
in TSO COMMAND PROCESSOR VOLl-ACCT 36 GY28-677l
basic function of
branching to system error message
routine
module residence
parameter lists for
restoring entry conditions
STBREAK macro instruction
in TSO COMMAND PROC VOL6-TKRMINAL
STBR~ macro instruction,
processing for
in TSO CONTROL PROGRAM

36 GY28-6776
36 GY28-7l99

STC
in CONTROL PROGRAM WITH MFT

STAX attention exit routine
~n TSO COMMAND PROCESSOR VOLl-ACC".l' 36
STAX attention parameter list
in TSO COMMAND PROCESSOR VOLl-ACC'!' 36
STAX environment
in TSO COMMAND PROC VOL5-0PEHATOR 36
STAX macro
in TSO COMMAND PROC VOL2-DELE.TE
36
issued by T~P
in TSO COMMAND PROC VOL5-0UTPUT
36
STAX macro instruction
in TSO COMMAND PROC VOL5-LISTDS
36
issued by T¥lP
in TSO CONTROL PROGRAM
36
in TSO TMP & SERVICE ROUTINES
36
issued by command processor
issued by Terminal Monitor Program
STAX macro issued by TMP
in TSO COMMAND PROC VOL6-RENAME
36
STAX Parameter List
in TSO CONTROL PROGRAM
36
format of
STAX service routine
in TSO COMMAND PROC VOLl-BROADCAST 36
issued by TMP
in TSO COMMAND PROC VOL1-SUBRTNS
36
issued by TMP
in TSO COMMAND PROC VOL4-LISTBC
36
in TSO COMMAND PROC VOL6-PROFILE
36
in TSO COMMAND PROC VOL6-PROTECT
36
issued by TMP
in TSO COMMAND PROC VOL6-TERMINAL 36
definition
in TSO COMMAND PROCESSOR VOLl-ADD 36
issued by TMP
in TSO COMMAND PROCESSOR VOLI-CHNG 36
in TSO COMMAND PROCESSOR VOL:l.-LIST 36
in TSO COMMAND PROCESSOR VOL2-CALL 36
issued by TMP
in TSO COMMAND PROCESSOR VOL4-FREE 36
issued by TMP

36

36 GY27-7128

STCB

~n CRJE PLM

36 GY30-20ll
in TELECOMMUNICATION ACCE.SS METHOD 30 GY30- 2029
STCB flow
in TCAM SERVICEABILITY AIDS
30 GY30- 2027
STCB formats
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
STCB trace table
in TCAM SERVICEABILITY AIDS
30 GY30- 2027

STCC macro

~n TSO COMMAND PROC VOL6-PROFILE

36 GY28-6776

STCC macro instructicn, processing
for
in TSO CONTROL PROGRAM

36 GY28-7l99

STCLEAR macro instruction
in TSO COMMAND PROC VOL6-ThRMINAL
STCLEAR macro instruction,
processing for
in TSO CONTROL PROGRAM

36 GY28-6776
36 GY28-7199

STCOM macro instruction, processing
for
in TSO CONTROL PROGRAM

36 GY28-7l99

STD SCRIPT roll
---in FORTRAN IV (G) COMPILER

25 GY28-6638

STDL (STACK descriptor list)
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
STDLxxx fields in STDL
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
Steal Core subroutine
MVT SUPERVISOR

----rn

36 GY28-6659

STEOS

----rn

GRAPHIC SUBRTN. PACKAGE

25 GY27-7152

427
step
in INTRO. TO CONTROL PROGRAM LOGIC
STEP
in ALGOL-To-PL/l LCP
Step control table (SCT)
in CONTROL PROGRAM WITH MFT
format and description of
job initiation use of
step deletion routine use of
step initiation routine use of
in JOB MANAGEMENT
construction of
description of
disposition
DSNAME table pointer in
in initiation
in JCL processing
in JFCB housekeeping
in termination
storage
in MVT JOB MANAGEMENT
construction of
format and description of
I/O device allocation routine
use of
initiator use of
system restart routine use of
termination routine use of
Step control table extension (SCTX)
in MVT JOB MANAGEMENT
format and description of
Step deletion
in CONTROL PROGRAM WITH MFT
Step deletion routines
in MFT SUPERVISOR
GO
SMALL GO
step in change operation
in TSO COMMAND PROCESSOR VOL1-CHNG
Step initiation
in CONTROL PROGRAM WITH MFT
Step initiation routines
in JOB MANAGEMENT
Step input/output table (SIOT)
in CONTROL PROGRAM WITH MFT
format and description of
in JOB MANAGEMENT
construction of
description of
disposition field
DSNAME table pointer in
in JCL processing
in JFCB processing
in termination
storage requirements of
in MVT JOB MANAGEMENT
format and description of
Step library data set
in JOB MANAGEMENT
Step restart
in JOB MANAGEMENT
Step restarting
in MVT JOB MANAGEMENT
Step termination
in CONTROL PROGRAM WITH MFT
in JOB MANAGEMENT
control routine
data set driver routine
exit routine
Step time limit
in CONTROL PROGRAM WITH MFT
STEP-UNTIL element
in ALGOL-TO-PL/l LCP
DD statement
in JOB MANAGEMENT

36 GY28-6605
29 GY33-7006
36 GY27-7128

36 GY28-6613

Step - STOP

steps. major implementation
in TSO COMMAND PROC VOL6-WhEN/END
sterling
in PL/I SYNTAX CHECKER PLM
constant
specification (PICTURE)
sterling conversion
in COBOL (F)

36 GY28-6776
29 GY33-8009

24 GY28-6382

STERM field in E01DATDF
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
STGFLG. field in CFLAGS
---rn-TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

36 GY28-6660

36 GY28-6660
36 GY27-7128
36 GY27-7236

36 GY28-6771

STIMER
---rn-MFT SUPERVISOR
36 GY27-7236
entry point
flowchart
functional description
module description
module synopsis
REAL parameter
TASK parameter
WAIT parameter
STIMER macro
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
STIMER macro instruction
in CONTROL PROGRAM WITH MFT
36 GY27-7128
problem program interface routine use
of
small partition module use of
STIMER routine
in MVT SUPERVISOR
36 GY28-6659
description of
entry point name(s) of
flowchart of
module name for
synopsis of

36 GY27-7128
36 GY28-6613
36 GY27-7128

STKENTRY. field in EXITPARM
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

STLINCT in DATAAREA DSECT
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

STMEND
---rn-COBOL-TO-PL/l LCP

29 GY33-7007

36 GY28-6613

STMPT

---rn

36 GY28-6776

ST!!!
in ALGOL-TO-PL/l LCP

29 GY33-7006

TSO COMMAND PROC VOL6-SUBMIT
in control
used

36 GY28-6660
36 GY28-6613
36 GY28-6613
36 GY28-6660
36 GY27-7128
36 GY28-6613

36 GY27-7128
29 GY33-7006

~TEPLIB

36 GY28-6613

STOP (post code)
in PL/I SUBROUTINE LIBRARY
STOP BRDR command
in TSO CONTROL PROGRAM
STOP central command
in CRJE PLM
STOP command
in CONTROL PROGRAM WITH MFT
in GRAPHIC JOB PROCESSOR SUPPORT
for GFX
for GJP
in JOB MANAGEMENT
in MVT JOB MANAGEMENT
execution of
use of
STOP Command Processor (IIOSTOP)
in 7074 EMULATE FOR M/165
function

29 GY28-6801
36 GY28-7199
36 GY30-2011
36 GY27-7128
36 GY27-7159
36 GY28-6613
36 GY28- 6660

GY27-7228

D

STOP - storage
STOP command Processor (IIOSTOP)
I in 7074 EMULATE FOR M/165
GY27-7228
L--------------------------------------(continued)
MOD
STOP GFX command
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
STOP GJPnnn command
in S/360 JOB PROCESSING 1130/2250 36 G'!27-7166
STOP INIT command
36 GY27-7128
in CONTROL PROGRAM WITH MFT
stop line I/O subtask
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
Stop line I/O subtask QCB
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Stop line request
in TCAM SERVICEABILITY AIDS
30 GY30-2027
stop line routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
STOP/Modify ECB
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771
STOP/MODIFY ECB
in TSO COMMAND PROC VOL1-BROADCAST 36 GY28-6771
in TSO COMMAND PROC VOL1-SUBRTNS
36 GY28-6771
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
in TSO COMMAND PROC VOL4-LISTALC
36 GY28-6774
in TSO COMMAND PROC VOL4-LISTBC
36 GY28-6774
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
in TSO COMMAND PROC VOL6-PROFILE
36 GY28-6776
36 GY28-6776
in TSO COMMAND PROC VOL6-PROTECT
in TSO COMMAND PROC VOL6-RENAME
36 GY28-6776
in TSO COMMAND PROC VOL6-TERMINAL 36 GY28-6776
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
Stop module
in CRJE PLM
36 GY30-2011
stop queue
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
stop/resume terminal transmission
routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
STOP RJE routine
in REMOTE JOB ENTRY
36 GY30-2005
STOP SGJPnnn command
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
STOP statement
in FORTRAN IV (E)
25 GY28-6601
compile-time processing of
object-time implementation of
in FORTRAN IV (G) COMPILER
25 GY28-6638
Polish notation for
in FORTRAN IV-TO-PL/l LCP
29 GY33-7000
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
STOP subroutine

428
in PL/I SUBROUTINE LIBRARY
stop terminal request
in TCAM SERVICEABILITY AIDS
stop the line queue
in QUEUED TELECOMM. ACCESS METHOD
STOP TSO command. processing
of
in TSO CONTROL PROGRAM
STOP TSTRACE command
in TSO CONTROL PROGRAM
STOP WTR command
in JOB MANAGEMENT
Stop 1 subtask
in QUEUED TELECOMM. ACCESS METHOD
Stop 3 subtask
in QUEUED TELECOMM. ACCESS METHOD
Stop 4 queue
in QUEUED TELECOMM. ACCESS METHOD
Stop 7 subtask
in QUEUED TELECOMM. ACCESS METHOD

29 GY28-6801
30 GY30-2027
30 GY30-200:':
36 GY28-7199
36 GY28-7199
36 GY28-6613
30 GY30-2002
30 GY30-2002
30 GY30-2002
30 GY30-2002

STOPLIN macro expansion linkage
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
STOPPR-IEKTSR
---rn-FORTRAN IV (H) COMPILER

25 GY28-6642

STOP2 routine
in QUEUED TELECOMM. ACCESS METHOD

30 GY30-2002

Storage
in GRAPHIC JOB PROCESSOR SUPPORT
in MACHINE-CHECK HANDLER. M135/145
main storage
in PL/I (F) COMPILER
attribute collection area
auxiliary
program too large
spilled
spilling
in PL/I SUBROUTINE LIBRARY
freed
request
search
in PL/I SYNTAX CHECKER PLM
for data area. extra work area
for syntax checker variants
not available
in TSO COMMAND PROC VOL2-ALLOCATE
released
requirement
in TSO COMMAND PROC VOL4-LISTBC
dynamic
main. static
in TSO COMMAND PROC VOL6-PROFILE
in TSO COMMAND PROC VOL6-PROTECT
chains. IKJPARS
estimates
requirements
in TSO COMMAND PROCESSOR VOL1-ADD
acquiring
requirements
in TSO COMMAND PROCESSOR VOL2·-CALL
chains used by PARSE
control
released
requirements
in TSO COMMAND PROCESSOR VOL6-RUN
chains used by IKJPARS
requirements
Storage. allocation of
in S/360 JOB PROCESSING 1130/2250
for GFX
for SGJP in System/360
for SGJP in 1130

36 GY27-7159
30 GY27-7237
29 GY28-6800

29 GY28-6801

29 GY33-8009

36 GY28-6772
36 GY28-6774
36 GY28-6776
36 GY28-6776

36 GY28-6771
36 GY28-6772

36 GY28-6776

36 GY27-7166

429
Storage, simulated 7094
in EMULATOR FOR 7090/7094(7094II
35 GY27-7187
Storage, System/370
in EMULATOR FOR 7090/7094/7094II
35 GY27-7187
location of buffers in
location of emulator program modules
in
location of simulated 7094 storage in
unavailable
Storage, use of
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
Storage allocation
in ASSEMBLER (F)
21 GY26-3700
in FORTRAN IV (E)
25 GY28-6601
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
for GFX
for GJP
in LINKAGE EDITOR (F)
31 GY28-6667
in LOADER
31 GY28-6714
for Duffers and DE CBs
for CESD entries
for save areas used during loading
Storage allocation, control routines
in PL/I (F) COMPILER
29 GY28-6800
Storage allocation-IEBCOPY
in UTILITIES
32 GY28-6614
Storage allocation logical phase
in PL/I (F) COMPILER
29 GY28-6800
Storage allocation routine (GETCORE)
31 GY28-6714
in LOADER
Storage allocation schematics
in FORTRAN IV (E)
25 GY28-6601
for PRFRM compilations
for SPACE compilations
Storage allocation table
in PL/I (F) COMPILER
29 GY28-6800
Storage blocks
in PL/I (F) COMPILER
29 GY28-6800
availability
span of complete statement
Storage capacity
in ALGOL-TO-PL/1 LCP
29 GY33-7006
Storage chains
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
storage Data Bus Out Check
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
Storage distribution
in FORTRAN IV (H) COMPILER
25 GY28-6642
phase 10
phase 15
phase 20
Storage dumping, control routines
in PL/I (F) COMPILER
29 GY28-6800
Storage element
36 GY28-6770
in TSO TMP & SERVICE ROUTINES
Storage element status map (FSSEMAP)
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
Storage errors
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
Storage estimates
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
Storage for communications data
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
requirements
storage for IFCEREPO (165) program
in UTILITIES
32 GY28-6614
Storage identification
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
non-recursive
recursive
Storage information
in S/360-1130 DATA TMN. - FORTRAN 25 GY27-7161
for system/360 PTOP
routines
for 1130 PTOP routines
,torage management

storaqe - Storage
in PL/I SUBROU~INE LIBRARY
macros
control blocks
Storage map
in ALGOL-TO-PL/1 LCP
in FORTRAN IV (E)
for assigned relative addresses
for generated literals
for implied external references
for referenced statement numbers
generation of
in FORTRAN IV (G) COMPILER
compiler
definition
description
object module
produced by Allocate
in FOR~RAN IV (H) COMPILER
contents of
production of
in FORTRAN IV-TO-PL/1 LCP
in GRAPHICS ACCESS METHOD
in TESTRAN
Storage Mapping Function
in ALGOL (F) COMPILER
storage of arrays
in PL/I SUBROUTINE LIBRARY
Storage Protect Feature
in MACrlINE-CHECK HANDLER, M135/145
Storage Protect Feature (SPF)
in MACHINE-CHECK HANDLER, M135/145
Storage Protect Feature (SPF) check
in MACHINE-CHECK HANDLER, S360 M65
Storage Protect Feature Analysis for
the Model 155
in MACHINE-CHECK HANDLER, M155/165
Storage Protect Feature Analysis for
the Model 165
in MACHINE-CHECK HANDLER, M155/165
Storage Protect Feature Test module
(IGFASROD)
in MACHINE-CHECK HANDLER, S360 M65
storage protection
in CONTROL PROGRAM WITH MF'I'
Storage protection key
in TSO COMMAND PROC VOL5-LISTDS
Storage Reconfiguration
in MACHINE-CHECK HANDLER, S360 M65
module (IGFASR2K)
theory
in MVT SUPERVISOR
ABEND1 routine with
description of
flowchart of
ABEND2 routine with
description of
flowchart of
ABEND5 routine with
ABEND8 routine with
description of
flowchart of
CDEXIT routine with (flowchart)
general description of
Storage requirement
in TSO COMMAND PROC VOL5-LISTDS
Storage requirements
in ASSEMBLER (F)
in FORTRAN IV SYNTAX CHECKER PLM
effect of passive line on
IPDTEE and IPDAGH modules
syntax checker
in PL/I (F) COMPILER
in TSO COMMAND PROC VOL2-ALLOCATE
in TSO COMMAND PROC VOL2-DELETE
in TSO COMMAND PROC VOL4-LISTALC
in TSO COMMAND PROC VOL5-LISTCAT

29 GY28-6801

29 GY33-7006
25 GY28-6601

25 GY28-6638

25 GY28-6642
29 GY33-7000
30 GY27-7113
37 GY28- 6611
26 GY33-8000
29 GY28-6801
30 GY27-7237
30 GY27-7237
31 GY27-7155
30 GY27-7198
30 GY27-7198
31 GY27-7155
36 GY27-7128
36 GY28-6775
31 GY27-7155
36 GY28-6659

19
36 GY28-6775
21 GY26-3700
25 GY28-6831

29
36
36
36
36

GY28-6800
GY28-6772
GY28-6772
GY28-6774
GY28-6775

430

Storage - Stream
Storage requirements
l--------------------------------------(continued)
in TSO COMMAND PROC VOL6-RENAME
36 GY28-6776
in TSO COMMAND PROC VOL6-TERMINAL 36 GY28-6776
in TSO COMMAND PROC VOL6-WHEN/END 36 GY28-6776
in '1'SO COMMAND PROCESSOR VOL1-ACCT 36 GY28-6771
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
Storage requirements, nroadcast data set
control module
in TSO COMMAND PROC VOL1-BROADCAST 36 GY28-6771
Storage requirements, subtask
in PL/I SUBROUTINB LIBRARY
29 GY28-6801
Storage requirements for CHANGE
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
Storage requirements for MCH
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
in MACdINE-CHECK HANDLER, M155/165 30 GY27-7198
Storage search
in TSO COMAND PROC VOL2-CNCL/STATus36 GY28-6772
Storage size, as an argument
in PLiI (F) COMPILER
29 GY28-6800
Storage utilization
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Storage volume, definition of
in JOB MANAGEMENT
36 GY28-6613
STORB
in TSO COMMAND FROC VOL6-TERMINAL
field name in PDL
STORE
in GRAPHICS PROBLEM ORIENTED RTNS.
Store channel instruction, channel
operation emulation
in EMULATOR FOR 7090/7094/7094II
Store Channel Instruction routine
(IITCHISC)
in EMULATOR FOR 7090/7094/709411
description
flowchart
store-fetch information
in FORTHAN IV (rl) COMPILER
Store-fetch information
in FORTRAN IV (H) COMPILER
Store Graphic Orders routine
(GSTOR)
in GRAPrlICS ACCESS METHOD
Store skeleton instructions
in FORTRAN IV (H) COMPILER

36 GY28-6776

30 GY27-7110
35 GY27-7187
35 GY27-7187

25 GY28-6642
25 GY28-6642
30 GY27-71l3

data area
in directory
STOWPTR, field in COMMON
in TSO COMMAND PROCESSOR VOL1-ADD

36 GY28-677l

STOWSW, field in COMMON
---rn-TSO COMMAND PROCESSOR VOL1-ADD

36 GY28-677l

STOWxxxx, fields in STOWLIST
in TSO COMMAND PROCESSOR VOL1-ADD

36 GY28-677l

STPB
---rn TSO COMMAND PROC VOL5-0PERATCR
data area
in data area directory
STPBALSD, field in STPB
in TSO COMMAND PROC VOL5-0PERATCR

36 GY28-6775

36 GY28-6775

STPL
in TSO COMMAND PROC VOL6-WHEN/END 36 GY28-6776
data area
in data area directory
STPL (STACK parameter list)
in TSO COMMAND PROCESSOR VOL1-ACCT 36 GY28-6771
at STAE ABEND exit time
at STAX attention exit time
at subcommand acquisition time
fields in
passed to IKJSTCK
size of
STPLECB
in TSO COMMAND PROC VOL6-WHENIEND
field in STPL

36 GY28-6776

STPLECT
in TSO COMMAND PROC VOL6-WBEN/END
field in STPL

36

STPLSTPB
in TSO COMMAND PROC VOL6-WBENIEND
field in STPL

36 GY28-6776

STPLUPT
in TSO COMMAND PROC VOL6-WBEN/END
field in STPL

36 GY28-6776

GY28-677~

25 GY28-6642
STPOS

STORPTR
in TSO COMMAND PROC VOL6-TERMINAL
field name in PDL
STOW
in TSO COMMAND PROC VOL6-RENAME
in UPDATE ANALYSIS PROGRAM
STOW macro
in TSO COMMAND PROC VOL2-DELETE
STOW macro instruction
in LINKAGE EDITOR (F)
entering name in PDS
issuing
STOW parameter list
in TSO COMMAND PROCESSOR VOL1-ADD
Stow routine (SVC 21-IGCOO02A)
in INPUT/OUTPUT SUPERVISOR
STOWC, field in STOWLIST
in TSO COMMAND PROCESSOR VOL1-ADD

---rn

25 GY27-7152

STPRO

---rn FORTRAN
36 GY28-6776
36 GY28-7106

IV-TO-PL/l LCP

36 GY28-6772

STPTBL
---rn-TSO COMMAND PROC VOL5-0PERATOR
data area
in data area directory

31 GY28-6667

STR
in COBOL-TO-PLIl LeP

36 GY28-677l
30 GY28-6616
36 GY28-6771

STOWFLG, field in CFLAGS
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
STOWLIST
in TSO COMMAND PROCESSOR VOL1-ADD

GRAPHIC SUBRTN. PACKAGE

36 GY28-6776

36 GY28-677l

STRDATA field name in IKJPARMD
in TSO COMMAND PROC VOL6-PROTECT
STREAM (keyword attribute)
in PL/I SYNTAX CHECKER PLM
attribute classification
in OPEN statement
Stream input/output
in PL/I SUBROUTINE LIBRARY
data management
general
GET/PUT statements
initialization modules

29 GY33-7000
36 GY28-6775

29 GY33-7007
36 GY28-6776
29 GY33-8009

29 GY28-680l

stream - smIZB

431
Stream input/output
I in PLiI SUBROUTINE LIBRARY
29 GY28-6801
L--------------------------------------(continued)
mode
modular linkage

Stroke table
---rn-GRAPHIC SUBRTN. PACKAGE
description
deleted
loaded
system

Strength reduction
in FORTRAN IV (H) COMPILER
example of

STRRPT
---rn-COBOL

String
in ALGOL (F) COMPILER
in ALGOL-TO-PL/l LCP
in TSO COMMAND PROC VOL6-PROTECT
length
pointer to in IKJPWPRM
pointer to in SVCPARMS
STl<.ING
in ALGOL-TO-PL/l LCP
in TSO TMP 6 SERVICE ROUTINES
character type
STRING (keyword option)
in PL/I SYNTAX CHECKER PLM
checking of (Gh~/PUT)
subroutine STRING
string array dope vector (SADV)
in PL/I SUBROUTINE LIBRARY
String attributes (BIT, CHARACTER)
in PLiI SYNTAX CHECKER PLM
checking of
in RETURNS attribute list
subroutine BITCHAR (IKM136)
String conversions
in PLiI SUBROUTINE LIBRARY
general
modules
String data representation
in PLiI SUBROUTINE LIBRARY
String dope vector (SDV)
in PL/I SUBROUTINE LIBRARY
String handling
in PLiI SUBROUTINE LIBRARY
String lengths
in PLiI (F) COMPILER
STRING option
in PLiI SUBROUTINE LIBRARY
String package, general design
in PL/I SUBROUTINE LIBRARY
String PDE parameter
in TSO COMMAND PROCESSOR VOL2-CALL
STRING routine
in COBOL (F)
String search service routine
in TSO COMMAND PROCESSOR VOL3-EDIT
String subroutines
in PL/I SUBROUTINE LIBRARY
address of string
bit
character
linkage to
STRING table
in COBOL (F)
Strings
in COBOL (F)
ADD
CALL
EQUATE
EVAL
GO
IF
MOVE
SUBSCRIPT
STRNOW, field in DLCTLR
in TSO COMMAND PROC VOL1-DELETE

25 GY28-6642

26 GY33-8000
29 GY33-7006
36 GY28-6776

29 GY33-7006
36 GY28-6770
29 GY33-8009

29 GY28-6801
29 GY33-8009

29 GY28-6801

29 GY28-6801
29 GY28-6801
29 GY28-6801
29 GY28-6800
29 GY28-6801
29 GY28-6801
36 GY28-6772
24 GY28-6382
36 GY28-6773
29 GY28-6801

24 GY28-6382

(E)

Structural flow-IEHPROGM
in UTILITIES
structure, GEr/PUT code
in PL/I SUBROUTINE LIBRARY
structure, overlay
in COBOL-TO-PL/l LCP
structure, program hierarchy
in TSO COMMAND PROC VOL5-LISTCAT
structure, {lADS
in TSO COMMAND PROCESSOR VOL1-ADD
Structure assignment statements
in PL/I (F) COMPILER
structure Dope Vector
in PL/I SUBROUTINE LIBRARY
Structure expressions
in PL/I (F) COMPILER
structure level numbers
in PL/I (F) COMPILER
Structure of conversion package
in PL/I SUBROUTINE LIBRARY
Structure of IEBTCRIN
in UTILITIES
Structure of IEHATLAS
in UTILITIES
Structure of IEHMOVE
in UTILITIES
Structure of program
in ONLINE TEST EXECUTIVE PROGRAM
description of
in illustration
tabular
Structure of the COBOL Compiler
in COBOL (E)
structure processor, in aggregates
phase
in PL/I (F) COMPILER
Structure recognition
in COBOL-TO-PLIl LCP
STRUCTURE statement
in FORTRAN IV (H) COMPILER
Structured source listing
in FORTRAN IV (H) COMPILER
Structured variable symbol (e)
in PL/I SYNTAX CHECKER PLM
Structures
in PL/I SUBROUTINE LIBRARY
in PL/I SYNTAX CHECKER PLM
attributes in
level number
names:
structure found flag (STRUFLAG)
subroutine STRUTEST CIKM23)

25 GY27-7152

24 GY24-5009
32 GY28-6614
29 GY28-6801
29 GY33-7007
36 GY28-6775
36 GY28-6771
29 GY28-6800
29 GY28-6801
29 GY28-6800
29 GY28-6800
29 GY28-6801
32 GY28-6614
32 GY28-6614
32 GY28-6614
37 GY28-6651

24 GY24-5009
29 GY28- 6800
29 GY33-7007
25 GY28-6642
25 GY28-6642
29 GY33-8009
29 GY28-6801
29 GY33- 8009

24 GY28-6382

36 GY28-6771

STRUFLAG
• in PL/I SYNTAX CHECKER PLM

29 GY33-8009

STRUTEST
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

STSIZE macro instruction
---rn-TSO COMMAND PROC VOL6-TERMINAL
STSIZE macro instruction, processing
for
in TSO CONTROL PROGRAM

36 GY28-6776
36 GY28-7199

R

STSKXP - subcommands

432

STSKIP
---rn-COBOL (E)

24 GY24-5009

STTEST-IEKKST

~FORTRAN IV (H) COMPILER

STTIMEOU macro instruction
in TSO COMMAND PROC VOL6-TERMINAL
STTIMEOU macro instruction.
processing for
in TSO CONTROL PROGRAM
STXTR-IEKRSX
in FORTRAN IV (H) COMPILER

25 GY28-6642
36 GY28-6776
36 GY28-7199
25 GY28-6642

in EMULATOR FOR 7090/7094/709411
35 GY27-7187
SUB (sequential unit block)
in 7074 EMULATE FOR M/165
GY27-7228
Sub-allocation
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
SUBADD-IEKKSA
---rn-FORTRAN IV

(H)

COMPILER

SUBADR cells
---rn-COBOL (F)
SUBADR fields
in COBOL (F)
SUBADR-I fields
in COBOL (F)

25 GY28-6642
24 GY28-6382
24 GY28-6382
24 GY28-6382

SUBCHAIN (field in test communication
table)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description of
SUBCHK roll
---rn-FORTRAN IV (G) COMPILER

25 GY28-6638

Subclasses of machine-checks
in MACHINE-CHECK HANDLER. M135/145 30 GY27-7237
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
Model 155
Model 165
SUBCODE field
in EMULATOR FOR 7090/7094/709411
meaning
when set
subcommand
in TSO COMMAND PROC VOL1-DELETE
in TSO COMMAND PROCESSOR VOL1-ADD
parameters
processor functions
in TSO COMMAND PROCESSOR VOL3-EDIT
definition
EDIT. functions of
validation of
Subcommand (or command) name
in TSO COMMAND PROCESSOR VOL4-HELP
Subcommand entry point table
in TSO COMMAND PROCESSOR VOL7-TEST
use of
Subcommand handler
in TSO COMMAND PROC VOL5-0UTPUT
Subcommand, list. restrictions
in TSO COMMAND PROCESSOR VOL4-HELP
Subcommand name
in TSO COMMAND PROC VOL1-DELETE
Subcommand name table (IKJEGSCD)
in TSO COMMAND PROCESSOR VOL7-TEST
description and format of
Subcommand processor
in TSO COMMAND PROCESSOR VOL3-EDIT

35 GY27-7187

36 GY28-6771
36 GY28-6771
36 GY28-6773

36 GY28-6774

invoking of
BOTTOM
method of operation diagram
operation of
CHANGE
method of operation diagram
operation of
DELETE
method of operation diagram
operation of
DOWN
method of operation diagram
operation of
END
operation of
FIND
method of operation diagram
operation of
FORMAT
method of operation diagram
operation of
HELP
method of operation diagram
operation of
INPUT
method of operation diagram
operation of
INSERT
method of operation diagram
operation of
Line Insert/Replace/Delete
method of operation diagram
operation of
LIST
method of operation diagram
operation of
MERGE
method of operation diagram
operation of
PROFILE
method of operation diagram
operation of
Subcommand processor (continued)
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
RENU¥,
method of operation diagram
operation of
RUN
method of operation diagram
operation of
SAVE
method of operation diagram
operation of
SCAN
method of operation diagram
operation of
TAB SET
method of operation diagram
operation of
TOP
method of operation diagram
operation of
UP

36 GY28-6777
36 GY28-6775
36 GY28-6774
36 GY28-677l
36 GY28-6777
36 GY28-6773

method of operation diagram
operation of
VERIFY
method Of operation diagram
operation of
Subcommand processors
in TSO COMMAND PROCESSOR VOL7-TEST
list of
Subcommand table
in CRJE PLM
Subcommands
in CRJE PLM
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6777
36 GY30-20ll
36 GY30-20l1
36 GY28-6775

433
SU.lJcommancis
I in TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6775
L--------------------------------------{continued)
check validity of
in TSO COMMAND PROCESSOR VOLI-ACCl 36 GY28-6771
acquisition of
event control block for
processing of
in l'SO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description, diagram, and flowchart of
invoking
typical processing of
SUBeTR counter
---rn-COBOL (F)

24 GY28-6382

Subfield
in 'ISO COMMAND PROCESSOR VOLI-ADD
account number
password
SUBGEN-IEKVSU
in FORTRAN IV

(ti)

COMPILER

36 GY28-6771

25 GY28-6642

Subject hierarchy
~n COBOL (F)
definition

24 GY28-6382

SUblevel, dummy offset to
in TSO COMMAND PROC VOLI-DELETE
Sublevel offset
in TSO COM~AND PROC VOLI-DELETE

36 GY28-6771
36 GY28-6771

SUBMIT attribute, index for
---rn-TSO COMMAND PROCESSOR VOLI-ADD 36
submit attribute key
in TSO COMMAND PROCESSOR VOLI-CHNG 36
Submit command
in TSO COMAND PROC VOL2-CNCL/STATUS36
SUBJVJIT command
in MVT JOB MANAGEMENT
36
in TSO COMMAND PROC VOL2-DEL£TE
36
in TSO COMMAND PROCESSOR VOLb-TIME 36
in TSO CONTRCL PROGRAM
36
SUBMIT command processor
in CRJE PLM
36
entry point code
flowchart
function
messages requested
microfiche directory
module description
reigster usage
in TSO COMMAND PROCESSOR VOL4-HELP 36
load module, reference to
modules used by HELP
Submit command user
in TSO COMMAND PROC VOL5-0PERATOR 36
Submit control table
in TSO COMMAND PROC VOL6-SUBMIT
36
Submit data set
in TSO COMMAND PROC VOL6-SUBMIT
36
SUBMIT input record processor
in CRJE PLM
36
entry point code
flowchart
microfiche directory
module description
register usage
Submit queue
in TSO COMAND PROC VOL2-CNCL/STATUS36
SUBJVJLT-IEKKSM
in FORTRAN IV (H) COMPILER

GY28-6771
GY28-6771
GY28-6772
GY28-6660
GY28-6772
GY28-6776
GY28-7199
GY30-2011

GY28-6774

Subcommands - Subroutine

Subparameter NCP (of DD statement)
in PL/I SUBROUTINE LIBRARY

29 GY28-6801

Sub pool
in MVT SUPERVISOR
36
indicating shared ownership of
relationship with types of GETMAIN
requests
in ONLINE TEST EXECUTIVE PROGRAM
37
GETMAIN for
moving DEBs to
in PL/I SUBROUTINE LIBRARY
29
non/zero
zero
subpool, EeT in
in TSO COMMAND PROC VOL6-WrlEN/END 36
Sub pool End-of-Task routine
in MVT SUPERVISOR
36
Subpool length (STORB)
in TSO COMMAND PROC VOL6-TERMINAL 36
Subpool number
in TSO COMMAND PROCESSOR VOLI-ADD 36
subpool number, in IKJWHEN
in TSO COMMAND PROC VOL6-WHEN/END 36
Sub pool queue element (SPQE)
in MVT SUPERVISOR
36
abnormal release of
construction of
format of
normal release of at end of task
Subpool zero
in GRAPHIC SUBRTN. PACKAGE
25
Subpool-78
in TSO COMMAND PROCESSOR VOL4-EXEC 36
Subpools
in MFT SUPERVISOR
36
invalid
specifying
Subprogram addresses
in FORTRAN IV (G) COMPILER
position in object module
Subprogram argument lists
in FORTRAN IV (G) COMPILER
position in object module
Subprograms
in FORTRAN IV (E)
argument lists for
epilog table for
ESD card images for
in FORTRAN IV (H) COMPILER
not supplied by IBM

GY28-6659

GY28-6651
GY28-6801

GY28- 6776
GY28- 6659
GY28-6776
GY28-6771
GY28- 6776
GY28-6659

GY27-7152
GY28-6774
GY27-7236

25 GY28-6638
25 GY28-6638
25 GY28-6601

25 GY28-6642

SUBQCTEL
in CRJE PLM

36 GY30-2011

subgueue parameter
in TSO CONTROL PROGRAM

36 GY28-7199

GY28-6775
GY28-6776
GY28-6776
GY30-2011

GY28-6772

25 GY28-6642

SUBREFFL (subscript flag)
in PL/I SYNTAX CHECKER PLM
in COMFIAG2
subroutine
in PL/I SYNTAX CHECKER PLM
Subroutine directory
in FORTRAN IV (H) COMPILER
FSD
phase 10
phase 15
phase 20
phase 25
phase 30
Subroutine library
in FORTRAN IV-TO-PL/l LCP

29 GY33-8009

29 GY33-8009
25 GY28-6642

29 GY33-7000

III5J

Subroutine -

434

SUBSClUP'l'S

Subroutine linkage
in ASSEMBLER (F)
SUBROUTINE statement
in FORTRAN IV (E)
compile-time processing of
in FORTRAN IV-TO-PLIl LCP
Subroutine table
in TESTRAN
Subroutines
in COBOL (F)
Arithmetic
Conversion
Input/output
in GRAPHIC SUBRTN. PACKAGE
attention related
converting coordinates
cursor
direct order generation
image control
image generation
image identification
initiation and termination
invoking
light pen
read data from buffer to main
storage
requested
status information about
stroke
in GRAPHICS PROBLEM ORIENTED RTNS.
STORE
GOFFSG
in PLiI SUBROUTINE LIBRARY
computa tional
control task
error/exceptional conditions
in S/360 JOB PROCESSING 1130/2250
for data transmission
in System/360
in 1130
from 1130 subroutine
library
LOCAL
within IKAJCL
within lKAPSMBO
in TSO COMMAND PROCESSOR VOLI-CHNG
DLACLS
DLACTS
DLPRLS
DLPRTS
IKJFRSP
NEWPRDF
PRDFCH
in TSO COMMAND PROCESSOR VOL4-HELP
in IKJEFH02
BIANKOUT
CKFOUND
CTRLCHAR
KEYCHAR
PUTOUT
in IKJEFH03
EOD
SYNAD
Subroutines of card scanner RDCDRT
in UTILITIES
Subroutines of IKJEFD30
in TSO COMMAND PROC VOL2-ALLOCATE
Subroutines of IKJEFT82
in TSO COMMAND PROC VOL6-PROFILE
SUBS/REGION list
---rn PLiI (F) COMPILER
SUBS table
in PLiI (F) COMPILER

in ASSbMBLER (F)

21 GY26-3700

21 GY26-3700
25 GY28-6601

SUBSCR subroutine
---rn-COBOL (F)

24 GY28-638L

29 GY33-7000
37 GY28-6611
24 GY28-6382

25 GY27-7152

30 GY27-7110
29 GY28-6801

36 GY27-7166

36 GY28-6771

36 GY28-6774

32 GY28-6614
36 GY28-6772
36 GY28-6776
29 GY28-6800
29 GY28-6800

Subscript
in FORTRAN IV (H) COMPILER
expressions
absorption of constants in
operators, skeleton instructions
text entry
in PL/I SYNTAX CHECKER PLM
expression as
flag SUBREFFL
mode register (ARRF)
right parenthesis encloses (R~5)
within expressions
Subscript Cell nunbers
in COBOL (F)
Subscript Defining strings
in COBOL (F)
Subscript expression
in ALGOL (F) COMPILER
in ALGOL-TQ-PLIl LCP
Subscript expressions
in FOR~RAN IV (E)
computation of
optimization of
overflow table entries for
Subscript Handling Phase
in ALGOL (F) COMPILER
Description
Flowcharts
Subscript incrementation
in ALGOL (F) COMPILER
Subscript initialization
in ALGOL (F) COMPILER
Subscript intermediate
text
in FORTRAN IV (E)
Subscript list
in PL/I SYNTAX CHECKER PLM
expressions in
in DEFINED attribute
within expressions
Subscript optimization
in ALGOL (F) COMPILER
in FORTRAN IV (E)
statements subject to
statements that affect
in PL/I (F) COMPILER
commoning
invariance
transf ormati on
SUBSCRIPT strings
in COBOL (F)
Subscript Table
in ALGOL (F) COMPILER
in FORTRAN IV (E)
Subscripted Data Name References
in COBOL (F)
Procedure IC-Text format
Subscripted Variable
in ALGOL (F) COMPILER
in ALGOL-TO-PLIl LCP
Subscripting
in COBOL (E)
Subscripting switches
in FORTRAN IV SYNTAX CHECKER PLM
SUBSCRIPTRANGE condition
in PL/I SUBROUTINE LIBRARY
Subscripts
in FORTRAN IV-TO-PLIl LCP
SUBSCRIPTS FAIL routine
in FORTRAN IV (G) COMPILER

25

GY28-664~

29 GY33-8009

24 GY28-6382
24 GY28-6382
26 GY33-8000
29 GY33-7006
25 GY28-6601

26 GY33-8000

26 GY33-8000
26 GY33-8000
25 GY28-6601
29 GY33-8009

26 GY33-8000
25 GY28-6601
29 GY28-6800

24 GY28-6382
26 GY33-8000
25 GY28-6601
24 GY28-6382
26 GY33-BOOO
29 GY33-7006
24 GY24-5009
25 GY28-6831
29 GY28-6801
29 GY33-7000
25 GY28-6638

435
Subsearch processing
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
subsequent buffer prefix
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
sunsetted dictionaries
in ASSEMBLER (F)
substitute ddnames
in FORTRAN IV (H) COMPILER
sUDstitution mode
in ASSEMBLER (F)
Substitution name
in FORTRAN IV-To-PL/l LCP
substitutions. in source text
in PL/I (F) COMPILER

21 GY26-3700
25 GY28-6642
21 GY26-3700
29 GY33-7000
29 GY28-6800

SUBSTR function
in PL/I SUBROUTINE LIBRARY

29 GY28-6801

SUBSUM IEKQSM
in FORTRAN IV (H) COMPILER

25 GY28-6642

Subsystem
in s/360 JOB PROCESSING 1130/2250
definition of
job definition from
in TSO CONTROL PROGRAM
Subsystem Mlalysis
module
in MACHINE-CHECK HANDLER. M135/145
in MACHINE-CHECK HANDLER. M155/165
subsystem Analysis module (IGFASR30)
in MACHINE-CHECK HANDLER. S360 M65
Subsystem Data Area
in MACHINE-CHECK HANDLER. M135/145
SUBTAB. in history
in TSO COMMAND PROC VOL6-SUBMIT
Subtask
in CRJE PLM
in EMULATOR FOR 7090/7094/7094II
in MFT SUPERVISOR
active
creation
task control block
(TCB)
in MVT SUPERVISOR
attaching of
detaching of
queue
selection of during abnormal
termination
in PL/I SUBROUTINE LIBRARY
defined
initialization
invocation
storage requirements
Subtask. definition of
in REMOTE JOB ENTRY
Subtask control block
in CRJE PLM
field descriptions
general description
map
microfiche directory
subtask control block (STeB)
in QUEUED TELECOMM. ACCESS METHOD
full
fields and description
format
truncated
fields and description

36 GY27-7166
36 GY28-7199
30 GY27-7237
30 GY27-7198
31 GY27-7155

Subsearcb - Summary

format
in REMOTE JOB ENTRY
in TELECOMMUNICATION ACCESS METHOD
Subtask Control Block Trace Dump
in TeAM SERVICEABILITY AIDS
entry
functions
Subtask control block trace table
in TCAM SERVICEABILITY AIDS
Subtask Exi t routine CIITMWRXT)
in EMULATOR FOR 7090/7094/7094II
subtask operations
in REMOTE JOB ENTRY
Subtask priority on a QCB
in TELECOMMUNICATION ACCESS METHOD
Subtask region size
in MVT JOB MANAGEMENT
subtask trace option
in TELECOMMUNICATION ACCESS METHOD
Subtask trace table
in TELECOMMUNICATION ACCESS METHOD
Subtaskinq
in MFT SUPERVISOR
Subtasking in MFT
in INITIAL PROGRAM LOADER AND NIP
subtasks of TCAM dispatcher
in TELECOMMUNICATION ACCESS METHOD

36 GY30-2005
30 GY3Q- 2029
30 GY30-2027

30 GY30-2027
35 GY27-7187
36 GY30-2005
30 GY30-2029
36 GY28-6660
30 GY30-2029
30 GY30-2029
36 GY27-7236
36 GY28-6661
30 GY30-2029

subtract operations. skeleton instructions
for
in FORTRAN IV (H) COMPILER
25 GY28-6642
SUBl
--:in COBOL (E)
SUBl subroutine
in QUEUED TELECOMM. ACCESS METHOD
chart

24 GY24-5009
30 GY30-2002

30 GY27-7237
Successful operation
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-6771
36 GY28-6716
36 GY30-2011
35 GY27-7187
36 GY27-7236

36 GY28-6659

29 GY28-6801

36 GY30-2005
36 GY30-2011

30 GY30-2002

Successor modules. scheduling and
loading
in MACHINE-CHECK HANDLER. M135/145 30 GY27-7237
Suffix
-rnALGOL-TO-PL/l LCP
Suffix $
in ALGOL-TO-PL/l LCP
SUM (arrays)
in PL/I SUBROUTINE LIBRARY
Summary
in EMULATOR FOR 7090/7094/7094II
tape postprocessor
tape preprocessor
in TSO COMMAND PROCESSOR VOL4-EXEC
of modules
of processing
of register use
Summary. ADD subcommand processing
in TSO COMMAND PROCESSOR VOLl-ADD
Summary. command processing
in TSO COMMAND PROC VOL6-WHEN/END
Summary. TERMINAL command processing
in TSO COMMAND PROC VOL6-TERMINAL
Summary module-IFCEREPO (165)
in UTILITIES
Summary of CALL processing
in TSO COMMAND PROCESSOR VOL2-CALL
Summary of error codes and return
codes
in GRAPHICS ACCESS METHOD
Summary of message flow
in TELECOMMUNICATION ACCESS METHOD

29 GY33-7006
29 GY33-7006
29 GY28-6801
35 GY27-7187.
36 GY28-6714

36 GY28-6771
36 GY28-6716
36 GY28-6716
32 GY28-6614
36 GY28-6712
30 GY27-7113
30 GY3G-2029

436

SWBary - SVC
summary of module functions
in FORTRAN IV (G) COMPILER
Summary of operation
in TSO COMMAND PROC VOL2-DELETE
Summary of output processing
in TSO COMMAND PROC VOL5-0UTPUT
Summary routine, postprocessor
(IENDVOL)
in 7074 EMULATE FOR W165
Summary routine (IENDVOL)
in EMULATOR FOR 7090/7094/7094I1
Summary table-IFCEREPO (165)
in UTILITIES
Supervisor
in JOB MANAGEMENT
Supervisor, contents
in TESTRAN
supervisor, overlay
in TESTRAN
supervisor area, error occurs in
in MACHINE-CfiECK HANDLER, M135/145
supervisor call
in TESTRAN
Supervisor call (SVC)
in JOB MANAGEMENT
interruption
library
transient area
34 instruction
35 instruction
90 instruction
in MFT SUPERVlSO~
exit routine
first-level interruption handler
entry point
flowchart
functional description
module description
module synopsis
interruption
New PSW
nonresident routines
Old PSW
record
relocation table
resident type 3 and 4 option
routine types
second-level interruption
handler
entry point
flowchart
functional description
module description
module synopsis
table
extension
format
transient area
supervisor call (SVC) library
in SEQUENTIAL ACCESS METHODS
Supervisor calls (SVCs)
in CATALOG MANAGEMENT
SVC 19
SVC 26
SVC 28
SVC 29
in TSO CATALOG MANAGEMENT
SVC 3 .
SVC 19
SVC 26
SVC 28
SVC 29
Supervisor mode
in TELECOMMUNICATION ACCESS METHOD
supervisor request block

25 GY28-6638
36 GY28-6772
36 GY28-6775
GY27-7228
35 GY27-7187
32 GY28-6614
36 GY28-6613
37 GY28-6611

in MVT SUPERVISOR
abnormal release of
construction of
format of
normal release of
supervisor request block (SVRB)
in INITIAL PROGRAM LOADER AND NIP
in MFT SUPERVISOR
creation
format of
supervisor state
in TESTRAN
Supervisor validity check routine
in INITIAL PROGRAM LOADER AND NIP
supervisory routine
in UTILITIES
of independent utilities
Supervisory routines
in QUEUED TELECOMM. ACCESS METHOD

36 GY28-6659

36 GY28-6661
36 GY27-7236

37 GY28-6611
36 GY28-6661
32 GY28-6614
30 GY30-2002

37 GY28-6611
30 GY27-7237
37 GY28-6611
36 GY28-6613

36 GY27-7236

SUPMAP option
in COBOL (F)

24 GY28-6382

Support module generation
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
support routines
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
Support utility programs
in UTILITIES
32 GY28-6614
surface analysis-IEHDASDR
in UTILITIES
Surface analysis procedure
in UTILITIES
data cell
disk and drum
Suspending system activity
in MVT JOB MANAGEMENT

32 GY28-6614
32 GY28-6614

36 GY28-6660

Suspension of EDIT program operation
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
SVC
in EMULATOR FOR 7090/7094/7094I1
error during emUlation
inclusion in SVCLIB
operation
routine description

35 GY27-7187

in EMULATOR FOR 7090/7094/7094I1
inclusion in SVCLIB
operation
routine description of
in INTRO. TO CONTROL PROGRAM LOGIC
instruction
interruption
interruption
handler
transient area
in MVT JOB MANAGEMENT
dequeue routine use of
functions of
interpreter use of
system output writer use of
use by termination
in ONLINE TEST EXECUTIVE PROGRAM
appendage module for
basic logic of
dedication of
entries for
exit from
flowcharts for
functions of
IECIOLTS appendage module
load modules for

35 GY27-7187

SVC

30 GY28-6604
30 GY28-6606

36 GY28-6745

30 GY30-2029

36 GY28-6605

36 GY28-6660

37 GY28-6651

437
SVC
I in ONLINE TEST EX~CUTIVE PROGRAM
37 GY28-6651
L--------------------------------------(continued)
operation diagrams for
relationship to OLTEP
:residence of
structure of
subroutine functions of
in TESTRAN
37 GY28-6611
in TSO COMAND PROC VOL2-CNCL/STATUS36 GY28-6772
in IKJEFF50
in IKJEFF51
in operation
in SVCPTRS
in TSO COMMAND PROC VOL5-0UTPUT
36 GY28-6775
in IKJEFF60
in IKJEFF61
in IKJEFF64
in operation
SVC
in TSO COMMAND PROC VOL5-0OTPUT
36 GY28-6775
in IKJEFF64
in operation
in TSO COMMAND FROC VOL6-SUBMIT
36 GY28-6776
description
used
in TSO CONTROL PROGRAM
36 GY28-7199
SVC Dump
in TSO CONTROL PROGRAM
36 GY28-7199
SVC DUMP
in MFT SUPERVISOR
36 GY27-7236
entry point
flowchart
module description
module synopsis
in MVT SUPERVISOR
36 GY28-6659
desc~~ption of
entr \point name of
fl~c arts of
mO~le names for
SVC dum '\ facility
in M
JOB MANAGEMENT
36 GY28-6660
SVC First-Level Interruption Handler
in M~:SUPERVISOR
36 GY28-6659
description of
entry point name of
flowchart of
module name for
synopsis of
SVC FLIH
in MV'I' SUPERVISOR
36 GY28-6659
SVC information block (SVCINFO)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
construction by the SVC 61 routine
(Table 12, functions 4-5)
format of
use by the Symbol module, IKJEGSYM
(Table 18, request types 2 and 3)
SVC interruption handling
in MVT SUPERVISOR
36 GY28-6659
for nonresident (transient) SVC routine
for type-1 SVC routine
for resident SVC routine requiring an
SVRE
SVC old PSW
in MVT SUPERVISOR
36 GY28-6659
SVC Parameter List (SVCPARM)
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
SVC purge parameter list
in MVT SUPERVISOR
36 GY28-6659
format of
SVC Purge routine
in MVT SUPERVISOR
36 GY28-6659
entry point name of
function of

SVC -

sve

module name for
synopsis of
SVC Second-Level Interruption Handler
in MVT SUPERVISOR
36 GY28-6659
description of
entry point name(s) of
f I owcha rt of
module name for
synopsis of
SVC SLIH
in MVT SUPERVISOR
36 GY28-6659
SVC table
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
in MVT SUPERVISOR
36 GY28-6659
format of
in TSO CONTROL PROGRAM
36 GY28-7199
restored at subsystem
termination
SVC 101
in TSO CONTROL PROGRAM
36 GY28-7199
SVC 18 (IGC018)
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
BLDLTAB option not used
Find (D option), BLDL routines
BLDLTAB option used
Find (D option), BLDL routines
SVC 21 (IGC0002A) - Stow routine
in INPUT/OUTPU'!' SUPERVISOR
30 GY28-6616
SVC 25 (IGC0002E) - track Dalance routine,
track overflow erase routine
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
SVC 29
in CONTROL PROGRAM WIT~ MFT
36 GY27-7128
SVC 3 (supervisor Exit routine)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY2.8-6777
SVC 31 (IGC0003A) - FEOV executor
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
SVC 34
in CONTROL PROGRAM WITH MFT
36 GY27-7128
in TSO COMMAND PROC VOL6-SUBMIT
36 GY28-6776
SVC 36
in CONTROL PROGRAM WITh MFT
36 GY27-7128
SVC 55 (IGC0005E) - SYNAD/EOV executor
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
SVC 58 (IGC058) routine
in BASIC TELECOMM. ACCESS METHOD
30 GY30-2001
description
logic flow
svc 6 (PUTLINE macro)
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
SVC 61 routine, IGC0006A
in TSO COMl~ND PROCESSOR VOL7-TEST 36 GY28-6777
diagram of
flowchart of
module description of
text description of
SVC 69 (IGC0006I) - BSP control routine
in INPUT/OUTPUT SUPERVISOR
30
SVC 80 Processing Routine (IKASVC)
in GRAPHIC JOB PROCESSOR SUPPORT
36
chart
description of
in S/360 JOB PROCESSING 1130/2250 36
chart
description of
SVC 83
36
in CONTROL PROGRAM WITH MFT
SVC 86 instruction
in UTILITIl!:S
32
SVC 88, use of
in 7074 EMULATE ]i'OR M/165
SVC 90
in CONTROL PROGRAM WITH M'FT
36
36
in MVT JOB MANAGEMENT

GY28-6616
GY27-7159
GY27-7166

GY27-7128
GY28-6614
GY27-7228
GY27-7128
GY2.8-6660

SVC -

438

SWENDSTRUC

SVC 93
in TSO CONTROL PROGRAM
SVC 93 (TPUT macro)
in TSO COMMAND PROCESSOR VOL6-SENL
SVC 95
in TSO CONTROL PROGRAM
SVC 96
in TSO CONTROL PROGRAM
SVC 97 routine. IGC0009G
in TSO COMMAND PROCESSOR VOL7-TEST
diagrams of
flowcharts of
module description of
text descriptions of
SVC 98. protect SVC
in TSO COMMAND PReC VOL6-PROTECT
entry code
in flow chart
parameter list contents
return codes
SVC 99
in MVT JOB MANAGEMENT
SVCPARMS - SVC parameter list
in TSO COMMAND PROC VOL6-PROTECT
description of
in data directory

36 GY28-7199
36 GY28-6776
36 GY28-7199
36 GY28-7199
36 GY28-6777

36 GY28-6776

36 GY28-6660
36 GY28-6776

SVCPTRS
in TSO COMAND PROC VOL2-CNCL/STATus36 GY28-6772
description
in operation
SVCRCTAB label
in TSO COMMAND PROC VOL6-PROTECT
SVCs available to background
---rn TSO CONTROL PROGRAM
SVCS used by subsystem
in TSO CONTROL PROGRAM

36 GY28-6776
36 GY28-7199
36 GY28-7199

SVCTJID. field in CALLPARM
in TSO COMMAND FROC VOL5-0PERATOR

36 GY28-6775

SVRB
in MVT SUPERVISOR

36 GY28-6659

in COBOL-TO-PL/l LCP
SWA
in COBOL-TO-PL/l LCP
Swap
in TSO COMMAND PROCESSOR VOL3-EDIT
definition
swap Allocation Table
in TSO CONTROL PROGRAM
SWAP command
in CONTROL PROGRAM WITH MFT
Swap Control Block
in TSO CONTROL PROGRAM
Swap data set
in TSO COMMAND PROCESSOR VOL3-EDIT
definition
in TSO CONTROL PROGRAM
direct access storage for
formatting of
initialization of SWAPCB for
valid ddnames for
Swap Data set Space Queue. format
of
.in TSO CONTROL PROGRAM
Swap devices
in TSO CONTROL PROGRAM
Swap End

in TSO CONTROL PROGRAM
Swap operation
in TSO CONTROL PROGRAM
Abnormal End Appendage
Channel End Appendage
channel programs for
format of
definition of
determining amount of main
storage for
end of
general description of
I/O error processing
indications of I/O error
of the Logon Image
indication Logon Image is
being swapped
operation
processing a swap
request
Program Controlled Interruption
Appendage
scheduling of
start of
valid devices for
swap Request Table
in TSO CONrROL PROGRAM
Swap Start
in TSO CONTROL PROGRAM
Swap Unit Allocation Table
in TSO CONTROL PROGRAM
obtaining space for
use of in swap operation
SWAPCB (Swap Control Block)
in TSO CONTROL PROGRAM
address of
channel prograIDs. format of
format of
initialization of
Swap Request Table
building entry for swap
operation
format of
initialization of
main storage requirements
for
release of entries in

36 GY28-7199
36 GY28-7199

36 GY28-7199
36 GY28-7199
36 GY28-7199

36 GY28-7199

29 GY33-7007
Swapping TSO task
in MVT JOB MANAGEMENT

36 GY28-6660

SWBAS
in COBOL-TO-PL/l LCP

29 GY33-7007

SWBASED
in COBOL-TO-PL/l LCP

29 GY33-7007

SWCLTST
in COBOL-TO-PL/l LCP

29 GY33-7007

29 GY33-7007
36 GY28-6773
36 GY28-7199
36 GY27-7128
36 GY28-7199
36 GY28-6773
36 GY28-7199

SWCOB

---rn

COBOL-TO-PL/l LCP

29 GY33-7007

SWCOBE
---rn-COBOL-TO-PL/l LCP

29 GY33-7007

SWDECP
---rn-COBOL-TO-PL/l LCP

29 GY33-7007

SWE
in COBOL-TO-PL/l LCP

29 GY33-7007

SWENDSTRUC
in COBOL-TO-PL/l LCP

29 GY33-7007

36 GY28-7199
36 GY28-7199

439

SWERORIG - SWSTRUCTORE

SWERORIG
in COBOL-TO-PL/l LCP

29 GY33-7007

switching modes, automatic
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237

SWERROR
in COBOL-TO-PL/l LCP

29 GY33-7007

SWITPTR, in PARMLIST
in TSO COMAND PROC VOL2-CNCL/STATUS36 GY28-6772

SWFIE.LD
in COBOL-To-PL/l LCP

29 GY33-7007

SWLKD

SWFOUND, subfield in COMMON
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
function
processing description
SWFRORIG
in COBOL-TO-PL/l LCP
SWGEN
in COBOL-TO-PL/l LCP

29 GY33-7007
29 GY33-7007

Switch
in ALGOL-TO-PL/l LCP
29
SWITCH
in ALGOL-TO-PL/l LCP
29
SWITCH
in ALGOL-TO-FL/l LCP
29
Switch (ALGOL-defined)
in ALGOL (F) COMPILER
26
SWITCH command
in MVT JOB MANAGEMENT
36
Switch declaration
in ALGOL (F) COMPILER
26
in Identifier Table
in intermediate source text
internal name
object code
in ALGOL-TO-PL/l LCP
29
Switch designator
in ALGOL (F) COMPILER
26
SWITCH field
in COBOL (F)
24
Switch identifier
in ALGOL-TO-PL/l LCP
29
Switch settings
in ONLINE TEST EXECUTIVE PROGRAM
37
SWITCH switches
in COBOL (F)
24
Switch type
in UPDATE ANALYSIS PROGRAM
36
Load-module analysis
Macro analysis
Output
Symbolic analysis
SWitches
in ASSEl!1BLER (F)
21
Phase F3
Phases F7, FI, F8, and FPP
in FORTRAN IV SYNTAX CHECKER PLM
25
in INITIAL PROGRAM LOADER AND NIP 36
LOAD UNIT
prefix
in TSO COMAND PROC VOL2-CNCL/STATUS36
description
in operation
in TSO COMMAND PROC VOL6-WHEN/END 36
in TSO COMMAND PROCESSOR VOL4-EXEC 36
binary
LIST
non-executable
in TSO COMMAND PROCESSOR VOL4-HELP 36
to control action in IKJEFF02
to control operations in DAIR
SWITCHES, field in COMMON
in TSO COMMAND PROCESSOR VOL1-ADD 36
Switching data sets
in MVT JOB MANAGEMENT
36

GY33-7006

---rn

COBOL-TO-PL/l LCP

29 GY33-7007

SWMAGNL
in COBOL-TO-PL/l LCP

29 GY33-7007

SWMAGNR
in COBOL-TO-PL/l LCP

29 GY33-7007

SWMAIN
in COBOL-TO-PL/l LCP

29 GY33-7007

SWMGNL

~COBOL-TO-PL/l LCP

29 Gp3-7007

SWMGNR

~COBOL-TO-PL/l LCP

29 GY33-7007

SWNXTSTA
in COBOL-TO-PL/l LCP

29 GY33-7007

SWPARM
---rn-COBOL-TO-PL/l LCP

29 GY33-7007

SWPCH
in COBOL-TO-PL/l LCP

29 GY33-7007

SWPCHF
---rn-COBOL-TO-PL/l LCP

29 GY33-7007

GY33-7006
GY33-7006
GY33-8000
GY28-6660
GY33-8000

GY33-7006
GY33-8000

SWPRINT, subfield in COMMON
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
function, print switch
processing description

GY28-6382
GY33-7006
GY28-6651

SWPUTREDEF
in COBOL-TO-PL/l LCP

29 GY33-7007

SWRECVAL
in COBOL-To-PL/l LCP

29 GY33-7007

SWREDEF
in COBOL-TO-PL/l LCP

29 GY33-7007

SWRELBIT
in COBOL

24 GY24-5009

GY28-6382
GY28-7106

GY26-3700
GY28-6831
GY28-6661

(E)

SWRPT

---rn

COBOL-TO-PL/l LCP

~
29 GY33-7007 ~

in COBOL-TO-PL/l LCP

29 GY33-7007

SWSD
in COBOL-TO-PL/l LCP

29 GY33-7007

SWSDADDR
in COBOL-TO-PL/l LCP

29 GY33-7007

SWSIZE
---rn-COBOL-TO-PL/l LCP

29 GY33-7007

SWSORT
in COBOL-TO-PL/l LCP

29 GY33-7007

GY28-6772
GY28-6776
GY28-6774

GY28-6774

SWSRCE

~COBOL-TO-PL/l LCP

29 GY33-7007

SWSTRUCTURE
in COBOL-TO-PL/l LCP

29 GY33-7007

GY28-6771
GY28-6660

440

SWX - Symbols
SWX
in COBOL-TO-PL/l LCP

29 GY33-7007

SWOl
in COBOL-TO-PL/l LCP

29 GY33-7007

SW48 CAR
in COBOL-TO-PL/l LCP

29 GY33-7007

SYAA,SYAB,
----"In COBOL (F)

24 GY28-6382

SYM
in TESTRAN
SYM record
in LINKAGE EDITOR (F)
in LOADER
format of input record
format of record in load module
treatment of
in TSO COMMAND PROCESSOR VOL7-TEST
description and format of

37 GY28-6611
31 GY28-6667
31 GY28-6714

36 GY28-6777

SYMBL

-rn ASSEMBLER

(F)

21 GY26-3700

symbol (SYM) record
in LINKAGE EDITOR (F)
31 GY28-6667
format
in output load module
processor (I~WLMSYM)
chart
synopsis
special event processing for
symbol conventions
in FORTRAN IV SYNTAX CHECKER PLM
25 GY28-6831
general
specific
Symbol cross-reference table
in ASSEMBLER (F)
21 GY26-3700
Symbol entry for XREF
in FORTRAN IV (H) COMPILER
25 GY28-6642
Symbol information block (SIB)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
construction by Symbol module, IKJEGSYM
format of
SYMBOL item
in FORTRAN IV (G) COMPILER
25 GY28-6638
symbol module, IKJEGSYM
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
diagram of
flowchart of
module description of
text description of
Symbol processing
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
restrictions on
Symbol resolution
in LOADER
31 GY28-6714
Symbol search routine
in TESTRAN
37 GY28-6611
Symbol table
in ASSEMBLER (F)
21 GY26-3700
in TESTRAN
37 GY28-6611
Base routine
ESD routine
First pass routine
Initializer routine
Last pass routine
symbol table (in-core symbol table)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
format of entry
placing elements in
removing elements from
Symbol table (SYMTAB)
in PL/I SUBROUTINE LIBRARY
29 GY28-6801

Symbol table dictionary entry
in PL/I (F) COMPILER
29
Symbol used in method of operation
diagrams
in TSO COMMAND PROCESSOR VOL1-ADD 36
Symbol variables, DED
in PL/I (F) COMPILER
29
Symbolic - name operator
in FORTRAN IV SYNTAX CHECKER PLM
25
assembler language equivalent for
description of
displacement conventions for
Symbolic accumulator register
in PL/I (F) COMPILER
29
Symbolic analysis
in UPDATE ANALYSIS PROGRAM
36
switch
Symbolic and macro jOb stream writer
(ANYLD)
in UPDATE ANALYSIS PROGRAM
36
SYMBOLIC KEYS
in COBOL (F)
24
Symbolic labels
in TESTRAN
37
symbolic libraries, updating
in UTILITIES
32
Symbolic name, text blocks
in PL/I (F) COMPILER
29
Symbolic names
in PL/I SUBROUTINE LIBRARY
29
defined
of registers
in TSO COMMAND PROC VOL5-LISTCAT
36
of modules and routines
of data areas (tables)
in TSO COMMAND PROCESSOR VOL7-TEST 36
handling of
Symbolic parameters
in MVT JOB MANAGEMENT
36
in START comIrand
processing of
buffer
in TSO COMMAND PROCESSOR VOL4-EXEC 36
length
matching of
substitution
Symbolic references, conversion
in PL/I (F) COMPILER
29
Symbolic register counter
in PL/I (F) COMPILER
29
symbolic registers
in PL/I (F) COMPILER
29
Symbols
in TSO COMMAND PROC VOL6-WHEN/END 36
in TSO COMMAND PROCESSOR VOLl-CHNG 36
Symbols, explanation of
in TSO COMMAND PROCESSOR VOL4-EXEC 36
Symbols, meaning of
in TSO COMMAND PROCESSOR VOL6-TIME 36
Symbols, meaning of, in diagrams
in TSO COMMAND PROCESSOR VOL4-HELP 36
Symbols, method of o~erations diagrams
in TSO COMMAND PROC VOL6-PROTECT
36
Symbols, on diagrams
in TSO COMMAND PROC VOL5-LISTDS
36
Symbols, processing for XREF
in FORTRAN IV (H) COMPILER
25
Symbols, used on diagrams
in TSO COMMAND PROC VOL4-LISTBC
36
legend
philosophy of
Symbols in method-of-o~eration diagrams
in TSO COMMAND PROC VOL5-LISTCAT
36
meaning of
symbols on diagrams
in TSO COMMAND PROC VOL4-LISTALC
36

GY28-6800
GY28-6771
GY28-6800
GY28-6831

GY28-6800
GY28-7106

GY28-7106
GY28-638~

GY28-6611
GY28-6614
GY28-6800
GY28-6801
GY28-6775
GY28-6777
GY28-6660

GY28-6774

GY28-6800
GY28-6800
GY28-6800
GY28-6776
GY28-6771
GY28-6774
GY28-6776
GY28-6774
GY28-6776
GY28-6775
GY28-6642
GY28-6774

GY28-6775
GY28-6774

441
synlbols used in method of operation
diagrams
in TSO COMMAND PROC VOL6-RENAME
in TSO COY~ND PROC VOL6-TERMINAL
in TSO COMMAND PROCESSOR VOL6-RUN
symools used on M.O. diagrams
in TSO COMMAND PROC VOL2-ALLOCATE
Symbols used on n~thod of operation
diagram'l
in '1'SO COMMAND PROCESSOR VOL2-CALL
Symbols used on MO diagrams
in TSO COMMAND PROC VOL2-DELETE
SYMTAB (Symbol Table)
in PL/I SUBROUTINE LIBRARY

in TSO COMMAND PROC VOL5-0PERATOR
Synchronization, multitasking
operations
in PL/I SUBROUTINE LIBRARY

36 GY28-6772

Synchronizing and error processing routines
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
Input, Readback
introduction to
output
paper tape character conversion
shared between QSAM and ESAM
track overflow (asynchronous)
unique to QSAM
Update mode
3211 printer

36 GY28-6772
36 GY28-6772
29 GY28-6801

SYNAD, field of DCB
in TSO COMMAND PROCESSOR VOL4-HELP 36
<> YNAD coding
in COBOL (F)
24
SYNAD/hOV executor (SVC 55 - IGGC0005E)
in INPUT/OUTPUT SUPERVISOR
30
SYNAD error analysis return codes
in TSO COY~AND PROC VOL1-sUBRTNS
36
SYNAD Exit routine
in EMULATOR FUR 7090/7094/709411
35
description
flowchart
in LOADER
31
synopsis of
SYNAD macro instruction
in INDEXED SEQUEN. ACCESS METHOD
30
SYNAD macro interface
in EMULATOR FOR 7090/7094/709411
35
SYNAD routine, FEOV executor
in INPUT/OUTPUT SUPERVISOR
30
SYNAD routine (IEWLCR01)
in LINKAGE EDITOR (F)
31
chart
synopsis
use of
SYNAD routine-IEBDG
in UTILITIES
32
SYNAD subroutine
in CRJE PLM
36

GY28-6774
GY28-6382
GY28-6616
GY28-6771
GY27-7187
GY28-6714
GY28-6618

SYNCHK, field in FLAGWORD

Synchronous communications
adapter (SCA)
in S/360-1130 DATA TMN. - FORTRAN
Synchronous corr.munications
adapter subroutine (SCAT2)
in S/360-1130 DATA TMN. - FORTRAN
Synchronous Error Exit routine
in EMULATOR FOR 7090/7094/709411
Synchronous error recovery (SYNAD)
routine
in SEQUENTIAL ACCESS METHODS
Synchronous error routine
in INDEXED SEQUEN. ACCESS METHOD
address
flISAM use
load mode use
scan mode use
SYNQCTEL
in CRJE PLM

29 GY28-6801

25 GY27-7161
25 GY27-7161
35 GY27-7187
30 GY28-6604
30 GY28-6618

36 GY30-2011

GY27-7187
GY28-6616
GY28-6667

GY28-6614
GY30-2011

35 GY27-7187
30 GY28-6618

SYNADRTN
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
entered by IKJEFH03
in-line subroutine
macro (SYNADAF)
message location
SYNCH
~ MFT SUPERVISOR
entry point
functional description
module description
SYNCH processing
in MVT SUPERVISOR
description of
entry point name for
flowchart of
module name for

36 GY28-6775

36 GY28-6776
36 GY28-6776
36 GY28-6776

SYMTABLE (field in test communication
table)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description of

SYNADAF macro
in EMULATOR FOR 7090/7094/709411
SYNADAF macro instruction
in INDEXED SEI~UEN. ACCESS METHOD

Symbols - Syntax

36 GY27-7236

36 GY28-6659

syntactic line
in FORTRAN IV SYNTAX CHECKER PLM
current message in
definition portion of
displacement conventions for
elements of
error message code
examples of
function of
order of
parts of
references to
restrictions
self-referencing facility
SYNTAX line
SYNTAX END line
Syntactical errors
in PL/I (F) COMPILER
correction
detection
in read-in phase
Syntax
in TSO COMMAND PROC VOL6-WHEN/END
in TSO COMMAND PROCESSOR VOL3-EDIT
of EDIT command
of EDIT subcommands
Syntax analysis
in COBOL (F)
Syntax Analysis routine
UKJPARS)
in TSO CONTROL PROGRAM
Syntax check
in CONTROL PROGRAM WITH MFT
DEFINE command
queue alter routine
in PL/I (F) COMPILER

25 GY28-6831

29 GY28-6800

36 GY28-6776
36 GY28-6773

24 GY28-6382
36 GY28-7199
36 GY27-7128
29 GY28-6800

Syntax - SYSEMOUT
Syntax check
L--------------------------------------(continued)
in TSO COMAND PROC VOL2-CNCL/STATUS36 GY28-6772
in TSO COMMAND PROC VOL4-LISTBC
36 GY28-6774
Syntax check, by Parse
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771
syntaA check command name
in TSO COMMAND PROC VOL6-PROTECT
36 GY28-6776
Syntax check command name (IKJPARS)
in TSO COM~~ND PROCESSOR VOL6-RUN 36 GY28-6776
Syntax Check Mode
in ALGOL (F) COMPILER
26 GY33-8000
Syntax check of command
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY28-6772
Syntax check of DELE~E
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
Syntax check operands
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
Syntax check routine
in MVT JOB MANAGEMENT
36 GY28-6660
syntax checker
in FORTRAN IV SYNTAX CHECKER PLM
25 GY28-6831
and EDIT command
committed, definition of
configuration considerations
debugging aids
error detection
error messages, list of
input checked by
purpose
restriction on input
storage requirements
syntax tables for
system generation
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
definition
use of
Syntax checker interface
in CRJE PLM
36 GY30-2011
Syntax checker program
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
embedded
module list
storage requirements
variants
Syntax checkers
in CRJE PLM
36 GY30-2011
Syntax checking
in COBOL (F)
24 GY28-6382
in TSO COMMAND PROC VOL4-LISTALC
36 GY28-6774
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
syntax checking, prompter
in TCAM SERVICEABILITY AIDS
30 GY30-2027
Syntax checks
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-611l
Syntax error
in FORTRAN IV (G) COMPILER
25 GY28-6638
Syntax error messages
32 GY28-66l4
in UTILITIES
Syntax errors
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
checking of
line number of
messages for
Syntax errors (Phase F7)
in ASSEMBLER (F)
21 GY26-3700
SYNTAX FAIL routine
in FORTRAN IV (G) COMPILER
25 GY28-6638
Syntax language
in FORTRAN IV SYNTAX CHECKER PLM
25 GY28-6831
SYNTAX line
in FORTRAN IV SYNTAX CHECKER PLM
25 GY28-683l
assembler language equivlanent for
format of
restrictions on

442
use of
Syntax misconceptions
in PL/I SYNTAX CHECKER PLM
29
debugging hints for
Syntax of OUTPUT parameters
in TSO COMMAND PROe VOL5-0UTPUT
36
Syntax Scan, Components of
in COBOL (E)
24
Syntax Scan, Procedure Division
in COBOL (E)
24
Syntax Scan for Data Definition
in COBOL (E)
24
Syntax table
in FORTRAN IV SYNTAX CHEC~R PLM
25
assembler language equivalent for
configurdtion considerations
defini tion of
elements of
example of
assembler language equivalent for
explanation of
limits of
function
general
specific
restriction, input
scanning of
storage requirements
SYSABEND
in MFT SUPERVISOR
SYSABEND data set
in EMULATOR FOR 1090/7094/709411
in MVT SUPERVISOR
SYSACT control procedure
in ALGOL-TO-PL/1 LCP
SYSCTLG
in CATALOG MANAGEMENT
as name for ENQ/DEQ
data set
allocation of space for
definition of
extending
formatting
opening
in TSO CATALOG MANAGEMENT
as name for ENQ/DEQ
data set
allocation of space for
definition of
extending
formatting
opening
SYSDEQ routine
in REMOTE JOB ENTRY

GY33-8009
GY28-6775
GY24-5009
GY24-5009
GY24-5009
GY28-6831

36 GY27-1236
35 GY27-7187
36 GY 28- 6659
29 GY33-7006
30 GY28-6606

36 GY28-6745

36 GY30-2005

SYSDIR- IEKAA9

~FORTRAN IV (H) COMPILER

SYSEMCTL data set
in EM~TOR FOR 7090/7094/709411
for emulator
opening and closing
reading
in 7014 EMULATE FOR M/165
SYSEMOUT data set
in EMULA~'OR FOR 7090/1094/1094II
f or emulator
opening and closing
writing messages in

25 GY28-6642

35 GY27-7187

GY27-7228

35 GY27-1l81

443
SYSGEN
in JOB MANAGEMENT
in TESTRAN
SYSGEN macro
in INITIAL PROGRAM LOADER AND NIP

36 GY28-6661

SYSGO data set
ASSEMBLER (F)

21 GY26-3700

---rn

36 GY28-6613
37 GY28-6611

SYSIN

---rn

ALGOL-To-PL/1 LCP
in COBOL (E)
in COBOL (F)
definition
in FORTRAN IV (E)
input data set for compiler
manipulation of
opening of data control block
for
in FORTRAN IV (H) COMPILER
in FORTRAN IV-TO-PL/ 1 LCP
in PL/I (F) COMPILER
opening
in SORT/MERGE
in UPDATE ANALYSIS PROGRAM
SYSIN, allocation of
in JOB MANAGEMENT
SYSLN appendage (IGG019CK)
in INPUT/OUTPUT SUPERVISOR
SYbIN data set
in ASSEMBLER (F)
SYSIN DCB
in UPDATE ANALYSIS PROGRAM
SYSIN files
in PL/I SUBROUTINE LIBRARY
SYSL - system list
in ASSEMBLER (F)
Phase FI
Phase F8

29 GY33-7006
24 GY24-5009
24 GY28-6382
25 GY28-6601

25 GY28-6642
29 GY33-7000
29 GY28-6800
33 GY28-6597
36 GY28-7106
36 GY28-6613

SYSOO'1'

SYSLIN data set
in FORTRAN IV (H) COMPILER
25 GY28-6642
in LINKAGE EDITOR (F)
31 GY28-6667
definition
in input processing
opening
processing after termination of
input
in LOADER
31 GY28-6714
defini tion of
initialization and input control
of
SYSLMOD
in SORT/MERGE
SYSLMOD data set
in LINKAGE EDITOR (F)
definition
in program organization
opening and determining block
size
reading RLD records from
writing on
SYSLOUT data set
in LOADER
initialization of
purpose of

33 GY28-6597
31 GY28-6667

31 GY28-6714

30 GY28-6616
21 GY26-3700
36 GY28-7106
29 GY28-6801

SYSLST
---rn-ASSEMBLER (F)
SYSNAMES
in TSO COMMAND PROC VOL4-LISTALC
indicators
operand
processing

21 GY26-3700
36 GY28-6774

21 GY26-3700

SYSLIB
---rn-COBOL (E)
24
in COBOL (F)
24
definition
SYSLIB data set
in ASSEMBLER (F)
21
in LINKAGE EDITOR (F)
31
definition
in input processing
opening
opening DCB in include processing
resolving ERs from
in LOADER
31
alternate DCB for
characteristics of
open routine (IEWOPNLB) flowchart
opening
passing an open data set
resolving ERs from
SYSLIN
in COBOL (F)
definition
in FORTRAN IV (E)
manipulation of
output data set for compiler
in PL/I (F) COMPILER
in SORT/MERGE
SYSLIN buffer
in LINKAGE EDITOR (F)
SY~LIN control block
in LOADER
format
processing
use in reading internal input

SYSGEN -

GY24-5009
GY28-6382
GY26-3700
GY28-6667

GY28-6714

24 GY28-6382
25 GY28-6601
29 GY28-6800
33 GY28-6597
31 GY28-6667
31 GY28-6714

SYSO - system output
in ASSEMBLER (F)
Phase F7
Phase FI
Phase F8
SYSGrREQ subroutine
in TSO COMMAND PROC VOL2-ALLOCATE
flowchart
function
in operation

21 GY26-3700

36 GY28-6772

SYSOUT
in JOB MANAGEMENT
36 GY28-6613
data set
routine
in TSO COMMAND PROC VOL6-PROTECT
36 GY28-6776
class
data set
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
class assignment
class PDE
SYSOUT class
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
SYSOUT data set
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
in s/360 JOB PROCESSING 1130/2250 36 GY27-7166
Activity chart
functions of
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY28-6772
in TSO COMMAND PROC VOL5-0UTPUT
36 GY28-6775
SYSOUT Data Set Display Routine (IKAPDISO)
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
chart
description of
SYSOUT open. job delete, data set scratch,
and CANCEL module
in CRJE PLM
36 GY30-2011

Ii
•

444

SYSOU'l' - System
SYSOUT open, job delete, data set scratch,
land CANCEL module
I in CRJE PLM
36 GY30-2011
L--------------------------------------(continued)
entry point code
flowchart
messages requested
microfiche directory
module description
reigster usage
SYSOUT parameter in the
GJOBCTL macro instruction
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
SYSOUT parameter on the GJOBCTL macro
instruction
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
SYSPCH
in ALGOL-TO- PL/1 LCP
in FORTRAN IV-TO-PL/1 LCP

29 GY33-7006
29 GY33-7000

SYSPRINT
in COBOL (E)
24 GY24-5009
in COBOL (F)
24 GY28-6382
definition
in FORTRAN IV (E)
25 GY28-6601
manipulation of
opening of data control block
for
output data set for compiler
in FORTRAN IV-TO-PL/1 LCP
29 GY33-7000
in PL/I (F) COMPILER
29 GY28-6800
dump
opening
in SORT/MERGE
33 GY28-6597
in TESTRAN
37 GY28-6611
in UPDATE ANALYSIS PROGRAM
36 GY28-7106
SYSPRINT buffers, dump index
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
SYSPRINT data set
in ASSEMBLER (F)
21 GY26-3700
in FORTRAN IV (H) COMPILER
25 GY28-6642
in LINKAGE EDITOR (F)
31 GY28-6667
definition
directing diagnostic messages to
opening
output block size
writing cross-reference table on
SYSPRINT DCB
in UPDATE ANALYSIS PROGRAM
36 GY28-7106
SYSPRINT files
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
implicit open
multitasking
termination
SYSPRNT
in ALGOL-To-PL/1 LCP
in FORTRAN IV-TO-PL/1 LCP

29 GY33-7006
29 GY33-7000

SYSPROC DD statement
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
SYSPUNCH
in COBOL (E)
in COBOL (F)
definition
in FORTRAN IV (E)
manipulation of
output data set for compiler
in PL/I (F) COMPILER
opening
SYSPUNCH data set
in ASSEMBLER (F)
in FORTRAN IV (H) COMPILER

24 GY24-5009
24 GY28-6382
25 GY28-6601
29 GY28-6800
21 GY26-3700
25 GY28-6642

SYSRC
in TSO COMMAND PROC VOL6-WHEN/END

36 GY28-6776

SYSRES data set
-rxiASSEMBLER (F)

21 GY26-3700

System
in MACHINE-CHECK HANDLER, M135/145
damage
in TSO COMMAND PROCESSOR VOL1-ADD
interfaces
macros used
SYSTEM (keyword option)
in PL/I SYNTAX CHECKER PLM
System ABEND
in TSO COMMAND PROC VOL6-WHEN/END
System action (on-conditions)
in PL/I SUBROUTINE LIBRARY
System administrator
in CRJE PLM
system Analysis
in MACHINE-CHECK HANDLER, M135/145
system Analysis
in MACHINE-CHECK HANDLER, M155/165
of MFT modules
of MVT modules
in MACHINE-CHECK HANDLER, S360 M65
module (IGFASROO)
theory
System Analysis of MFT modules
in MACHINE-CHECK HANDLER, M155/165
System Analysis of MVT modules
in MACHINE-CHECK HANDLER, M155/165
System attributes, of userid
in TSO COMMAND PROC VOLI-DELETE
System catalog
in TSO COMMAND PROC VOL5-LISTDS
in TSO COMMAND PROCESSOR VOL6-RUN
System catalog, interface routine
in TSO COMMAND PROC VOL2-DELETE
System control
in TELECOMMUNICATION ACCESS METHOD
system control block linkages
in QUEUED TELECOMM. ACCESS METHOD
System control blocks
in TELECOMMUNICATION ACCESS METHOD
command input buffer (CIB)
data control block (DCB)
data event control block (DECB)
data extent block (DEB)
OS I/O device characteristics
table
System control data
in UTILITIES
listing of
modification of
System control functions
in TELECOMMUNICATION ACCESS METHOD
AQCTL SVC 102 routine
TeAM Dispatcher
System control routines
in TELECOMMUNICATION ACCESS METHOD
system damage
in MACHINE-CHECK HANDLER, M155/165
Model 155
Model 165
System delay QCB
in TELECOMMUNICATION ACCESS METHOD
System delay subtask
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage

30 GY27-7237
36 GY28-6771

29 GY33-8009
36 GY28-6776
29 GY28-6801
36 GY3Q-2011
30 GY27-7237
30 GY27-7198
31 GY27-7155

30 GY27-7198
30 GY27-7198
36 GY28-6771
36 GY28-6775
36 GY28-6776
36 GY28-6772
30 GY30-2029
30 GY30-2002
30 GY30-2029

32 GY28-6614

30 GY30-2029

30 GY30-2029
30 GY27-7198

30 GY30-2029
30 GY30-2029

445
system environment
in ASSEMBLER (F)
21 GY26-3700
in ~ACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
System environment of
MCB/85
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
(S~REP)

in MFT SUPERVISOR
36 GY27-7~36
System Environment Recording,
hditing, and Printing
system error task
in MVT SUPERVISOR
36 GY28-6659
system error TCB
36 GY28-6659
in MVT SUPERVISOR
entry point name of
module name for
system error transient area
in MVT SUPERVISOR
36 GY28-6659
system GDSCB
in GRAPHIC SUBRTN. PACKAGE
25 GY27-7152
System generation
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
in FORTRAN IV SYNTAX CHECKER PLM
25 GY28-6831
CHECKER macro for
description of
general
specific
36 GY27-7159
in GRAPHIC JOB PROCESSOR SUPPORT
parameters used
requirements for
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
error, debugging hints for
macro instructions for
of syntax checker program
in QUh"'UED TELECOMM. ACCESS METHOD 30 GY30-2002
in REMOTE JOB ENTRY
36 GY30-2005
in s/360 JOB PROCESSING 1130/2250 36 GY27-7166
data module (IKASGD)
requirements for SGJP
in SORT/MERGE
33 GY28-6597
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
system nucleus modules
TCAM macro definitions
TCAM resident modules
TCAM support modules
TCAM transient modules
System generation, general
description
in TSO CONTROL PROGRAM
36 GY28-7199
System generation, tables
in PL/I (F) COMPILER
29 GY28-6800
system generation (SYSGEN)
in JOB MANAGEMENT
36 GY28-6613
System Generation Data Module (IKASGD)
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
System generation parameters
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
data flow of
description of
System Hang bit
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
System initialization
in CONTROL PROGRAM WITH MFT
36 GY27-7128
communications task initialization
master scheduler initialization routine
partition establishment
queue initialization
SMF initialization
system log initialization
System Initiated Logoff
in TSO CONTROL PROGRAM
36 GY28-7199
System input data
in MVT JOB MANAGEMENT
36 GY28-6660
System input reader

System -

System

in CONTROL PROGRAM WITH MFT
36 GY27-7128
System inquiry
in CRJE PLM
36 GY30- 2011
System interface
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
CRJE
initialization of syntax checker
System interruption request block
in MVT SUPERVISOR
36 GY28-6659
format of
initialization of
system interruption request block
(SIRB)
in MFT SUPERVISOR
36 GY27-7236
format
System Log Function
System interval
in TELECO~~UNICATION ACCESS METHOD 30 GY30-2029
System library
in UPDATE ANALYSIS PROG~,
36 GY28-7106
System log
in MVT SUPERVISOR
36 GY28-6659
definition of
System macro definition scan and dictionary
i)Uild
in ASSEMBLER (F)
21 GY26-3700
System macro instructions
in ASSEMBLER (F)
21 GY26-3700
in FORTRAN IV (E)
25 GY28-6601
used by compiler
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
System macro usage
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
System macros
in TSO COMMAND PROC VOL1-DELETE
36 GY28-6771
System macros, interface
in TOO COMMAND PROCESSOR VOLl-CHNG 36 GY28-6771
System management control area (SMCA)
in CON'IROL PROGRAM WITH MFT
36 GY27-7128
in MVT JOB MANAGEMENT
36 GY28-6660
format and description of
System management facilities
in MVT JOB MANAGEMENT
36 GY28-6660
data sets
dump routine
initialization of
initialization routine
interpreter use of
open initializer
records
SVC routine (SVC 83)
SWITCH command
use in output queue entry processing
use in region management
use in step termination
writer
system Management Facility
in MFT SUPERVISOR
36 GY27-7236
EXCP Counting routine
flowchart
functional description
module description
Output Lirr~t Expiration routine
flowchart
functional description
module description
Wait Time Collection routine
flowchart
functional description
module description
in MVT SUPERVISOR
36 GY28-6659
Attach routine with
description of
flowchart of
Detailed description of

System -

System

system Management Facility
I in MVT SUPERVISOR
36 GY28-6659
L--------------------------------------(continued)
Dispatcher routine with
description of
flowchart of
EXCP Counting routine
description of
flONchart of
Bxternal FLIH routine with
multiprocessing flowchart of
uniprocessing flowchart of
FREEMAIN routine wit h
description of
flowchart of
FMSMFCRE routine
description of
flowchart of
GETMAIN routine with
description of
flONchart of
GMSMFCRE routine
description of
flowchart of
Input/Output FLIH routine with
description of
flowchart of
Output Limit Expiration routine
description of
flowchart
Timer SLIH routine with
flowchart of
Timing Control Table
Wait routine with
description of
flowchart of
Wait Time routine
description of
flONchart of
in TSO CONTROL PROGRAM
36 GY28-7199
System management facility (SMF)
in CONTROL PROGRAM WITH MFT
36 GY27-7128
comparison of MFT and MVT
data sets
dump routine
initialization
records
step initiation routine
storage configuration record creation
SVC 83
TCTIOT construction routine
user initiation exit routine
writer
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
records
type
type
type
relation to DADSM
released space
TCT I/O table
system mapping macro instructions
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
areas filled in by
used by CALL
System message block (SMB)
in JOB MANAGEMENT
36 GY28-6613
allocation messages
construction of
description of
in termination
in MVT JOB MANAGEMENT
36 GY28-6660
contents of
format and description of
I/O device allocation routine
use of

446

initiator use of
interpreter use of
system output writer
use of
system restart routines use of
termination routine
use of
write-to-programmer use of
Systerr. message blocks
in TSO COMl~ND PROC VOL5-0UTPUT
System message file
in CRJE PLM
System rr,essages
in CRJE PLM
in GRAPHIC JOB PROCESSOR SUPPORT
appearance of
displaying
processing
translating
System messages (SMBs)
in S/360 JOB PROCESSING 1130/2250
oriain of
display of
processing of
conversion of
System names
in FOR1RAN IV (G) COMPILER
System nucleus module generation
in TELECOMMUNICATION ACCESS METHOD
System output (SYSOUT) device
in ONLINE TEST EXBCUTIVB PROGRAM
System output class directory (SCD)
in CONTROL PROGRAM WITH MFT
job initiation routine use of
in MVT JOB MANAGEMENT
format and description
initiator use of
interpreter use of
system restart routines
use of
termination routine use of

36 GY28-6775
36 GY30-2011
36 GY30-2011
36 GY27-7159

36 GY27-7166

25 GY28-6638
30 GY30-2029
37 GY28-6651
36 GY27-7128
36 GY28-6660

System output classes
in MVT JOB MANAGEMENT
36
definition of
initiator processing of
interpreter processing of
system output writer processing of
System output da~a sets
in MVT JOB MANAGEMENT
36
allocation of space for
definition of
disposition of
flush mode processing of
interpreter processing of
system output writer
processing of
system restart routines
processing of
termination routine
processing of
System output messages
in MVT JOB MANAGEMENT
36
allocation
interpreter
termination routine
system output queue
in MFT SUPERVISOR
36
System output writer
in CONTROL PROGRAM WITH MFT
36
nonresident
resident
in MVT JOB MANAGEMENT
36
commands

GY28-6660

GY28-6660

GY28-6660

GY27-7236
GY27-7128
GY28-6660

447
system output writer
I in MVT JOB MANAGEMENT
36 GY28-6660
L--------------------------------------(continued)
data set processing by
direct system output processing by
functions of
initialization of
5MB processing by
use of queue
management by
user routine of
system overflow
in REMOTE JOB BNTRY
36 GY30-2005
system overhead
in ASSEMBLER (F)
21 GY26-3700
system Queue Area
in MVT SUPERVISOR
36 GY28-6659
in TSO CONTROL PROGRAM
36 GY28-7199
System queue area (SQA)
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
constructing
expanding
parameter
rebuilding
size increase for subtasking
in MFT SUPERVI50R
36 GY27-7236
system recovery
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
as a level of recovery
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
in MACHINE-CHECK HANDLER, s360 M65 31 GY27-7155
definition
error/action
System repair
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
as a level of recovery
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
in MACHINE-CHECK HANDLER, s360 M65 31 GY27-7155
definition
error/action
system requirements
in ASSEMBLER (F)
21 GY26-3700
in IBM 1419/1275 DEVICE DEP. BSAM 30 GY21-0012
System residence device
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
det ermining
mounting of
UCB
System restart
in CONTROL PROGRAM WITH MFT
36 GY27-7128
system Restart Facilities
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
system service routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
System status index
in LINKAGE EDITOR (F)
31 GY28-6667
System stroke table
in GRAPHIC SUBR'I'N. PACKAGE
25 GY27-7152
System structure
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
application program
message control program
relationship of OS dispatcher to
TCAM
system generation
TCAM dispatcher
System supported restart
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
as a level of recovery
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
definition of
error/ action
system Task
in CONTROL PROGRAM WITH MFT
36 GY27-7128
definition of

System -

large partition scheduling
small partition scheduling
System task control
in CONTROL PROGRAM WITH MFT
flowchart
job selection routine use of
small partition module use of
System task control block
in REMOTE JOB ENTRY
System task control routine
in MVT JOB MANAGEMENT
System tasks
in MVT JOB MANAGEMENT
command execution
direct access volume
initialization
ini tiating
master scheduling
queue alter
queue initialization
reading
scratch data set utility
writing
terminating task
System termination
in MACHINE-CHECK HANDLER, M135/145
in MACHINE-CHECK HANDLER, M155/165
system utility programs
in UTILI TIES
System Writer, Emulator
in EMULATOR FOR 7090/7094/7094II
System/360 Operating System:
in TSO COMMAND PROC VOL4-LISTALC
in TSO COMMAND PROC VOL4-LISTBC
in TSO COMMAND PROCESSOR VOL4-EXEC
in TSO COMMAND PROCESSOR VOL4-HELP
System/360 SGJP
in s/360 JOB PROCESSING 1130/2250
description of
external reference table
flowcharts
Microfiche Directory
relationship to 1130 SGJP
relationship to GFX
routines, list of
routines, relationship of
tables and work areas
system/360 telecommunications
control block (GTCB)
in S/360-1130 DATA TMN. - FORTRAN

SYSUT1

36 GY27-7128

36 GY3O-2005
36 GY28-6660
36 GY28-6660

30 GY27-7237
30 GY27-7198
32 GY28-6614
35 GY27-7187
36
36
36
36

GY28-6774
GY28-6774
GY28-6774
GY28- 6774

36 GY27-7166

25 GY27-7161

SYSTERM data set
in LINKAGE EDITOR (F)
31 GY28-6667
definition
•
directing diagnostic messages to
opening
output block size
in LOADER
31 GY28-6714
initialization of
purpose of
SYSTERM routine (IEWTERM)
in LOADER
31 GY28-6714
flowchart of
synopsis of
SYSTEST
in TESTRAN

37 GY28- 6611

SYSUDUMP
in MFT SUPERVISOR
SYSUDUMP data set
in MVT SUPERVISOR

36 GY28-6659

SYSUT1
---rn-ALGOL-TO-PL/1 LCP
in COBOL (F)

29 GY33-7006
24 GY28-6382

36 GY27-7236

448

SYSUT1 - SYS1.LIRKLIB

SYSUTl
I in COBOL (F)
24 GY28-6382
L--------------------------------------(continued)
definition
in FORTRAN IV (E)
25 GY28-6601
constructing text buffer chains
for
manipulation of
opening of data control block
for
overlaying of DCB block size
for
work data set for compiler
in FORTRAN IV-TO-PL/l LCP
29 GY33-7000
in PL/I (F) COMPILER
29 GY28-6800
in SORT/MERGE
33 GY28-6597
in TESTRAN
37 GY28-6611
SYSUT1. contents
in COBOL-TO-PL/l LCP
29 GY3~-7007
SYSUTl data set
in ASSEMBLER (F)
21 GY26-3700
in FORTRAN IV (H) COMPILER
25 GY28-6642
in LINKAGE EDITOR (F)
31 GY28-6667
definition
device requirement
in program organization
reading from
writing text on
SYSUTl record processing-IEBPTPCH
in UTILITIES
32 GY28-6614
SYSUT2
---rn-ALGOL-TO-PL/l LCP
29
in COBOL (F)
24
definition
in FORTRAN IV (E)
25
constructing text buffer chains for
manipulation of
opening of data control block for
overlaying of DCB block size for
work data set for compiler
in FORTRAN IV-TO-PL/l LCP
29
SYSUT2. contents
in COBOL-To-PL/1 LCP
29
SYSUT2 data set
in ASSEMBLER (F)
21
in FORTRAN IV (H) COMPILER
25
SYSUT3
---rn-COBOL (F)
definition
in PL/I (F) COMPILER
closed for output
control
open for input
opening
ZURD routine
SYSUT3, contents
in COBOL-To-PL/l LCP
SYSUT3 data set
in ASSEMBLER (F)

GY33-7006
GY28-6382
GY28-6601

(F)
definition
SYSUT4. contents
in COBOL-TO-PL/l LCP
SYSUT4 data set use-IEBCOPY
in UTILITIES

GY28-6771
GY28-6771
GY28-6776
GY28-6771
GY28-6775

SYS1.BRODCAST data set
in TSO COMMAND PROC VOLI-BROADCAST 36 GY28-6771
allocation error analysis of
closing of
description of
dynamic allocation of
MAIL directory records in
opening of
structure of
updating user ids in
userid message text in
in TSO COMMAND PROC VOL4-LISTBC
36 GY28-6774
allocated via IKJDAIR
first record
inactive record key
located
number of records
opened and closed
SYSl.BRODCAST records. description of
in TSO COMMAND PROC VOLl-BROADCAST 36 GY28-6771
SYS1.CMDLIB
in TSO COMMAND PROC VOL6-PROFILE
SYS1.DUMP data set
in INITIAL PROGRAM LOADER AND NIP
cataloged
initializing
Write Dump routine
SYSl.DUMP DATA SET
in MVT SUPERVISOR
with Damage Assessment Routine

36 GY28-6776
36 GY28-666l

36 GY28-6659

GY33-7000
GY33-7007
GY26-3700
GY28-6642

24 GY28-6382
29 GY28-6800

29 GY33-7007

SYS1.HELP data set
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
alias name for member
allocation
blocksize
concatenation to
control cards
entered by IKJEFH03
message member
organization
partitioned
user-written memper
SYS1.IMAGELIB
in INPUT/OUTPUT SUPERVISOR

30 GY28-6616

SYS1.JOBQE
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

21 GY26-3700

SYSUT4

-----rnCOBOL

SYS1.BROADCAST
in TSO COMMAND PROC VOLI-DELETE
36
in TSO COMMAND PROCESSOR VOLl-CHNG 36
in TSO COMMAND PROCESSOR VOL6-SEND 36
SYSl.BROADCAST data set
in TSO COMMAND PROCESSOR VOLI-ACCT 36
SYSl.BROADCAST data set first record of
in TSO COMMAND PROC VOL5-0PERATOR 36

24 GY28-6382
29 GY33-7007
32 GY28-6614

SYS1. ASRLIB
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
SYS1.ASRLIB data set
in MACHINE-CHECK HANDLER. M135/145 30 GY27-7237

SYS1.LINKLIB
in INITIAL PROGRAM LOADER AND NIP 36
creating
initializing
in INTRO. TO CONTROL PROGRAM LOGIC 36
in MFT SUPERVISOR
36
in ONLINE TEST EXECUTIVE PROGRAM
37
in TELECOMMUNICATION ACCESS METHOD 30
SYS1.LINKLIB, emulator load modules on
in 7074 EMULATE FOR M/.165
SYS1.LINKLIB (linkage library data set)
in JOB MANAGEMENT
36
SYSl.LINKLIB data set
in MACHINE-CHECK HANDLER, Ml35/145 30
in MVT SUPERVISOR
36

GY28-6661
GY28-6605
GY27-7236
GY28-6651
GY30-2029
GY27-7228
GY28-6613
GY27-7237
GY28-6659

449
SYS1.LINKLIB data set
I in MVT SUPERVISOR
36 GY28-6659
L--------------------------------------(continued)
data control block (DCB)
entry point name for
module name for
data extent block (DEB)
entry point name for
module name for
SYSl.LM512
in PL/I SUBROUTINE LIBRARY

29 GY28-6801

SYSl. LOGREC
in INITIAL PROGRAM LOADER AND NIP
in MACHINE-CHECK HANDLER. M155/165
in ONLINE T~ST hXhCUTIVE PROGRAM
in UTILITIES
initializing
writing records from
SYS1.LOGREC data set
in MACHINE-CHhCK HANDLER. M135/145
general
references
overflow condition
in MVT SUPERVISOR
use of

36
30
37
32

GY28-6661
GY27-7198
GY28-6651
GY28-6614

30 GY27-7237

36 GY28-6659

SYS1.MACLIB
in TELECOMMUNICATION ACCESS METrlOD 30 GY30-2029
SYS1.MACLIB. DSECTS in
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
SY S1. NUCLEUS
in INTRO. TO CONTROL PROGRAM LOGIC 36 GY28-6605
in MACHINE-CHECK HANDLER. S360 M65 31 GY27-7155
in MFT SUPERVISOR
36 GY27-7236
SYsl.PARMLIB
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
in TSO CONTROL PROGRAM
36 GY28-7199
default member name for
parameters
invalid or missing
valid
SYS1.PARMLIB (parameter library data set)
in JOB MANAGEMEN~
36 GY28-6613
SY S1. PL1L IB
in PL/I SUBROUTINE LIBRARY

29 GY28-6801

SYS1.PROCLIB
in CONTROL PROGRAM WITH MFT
36 GY27-7128
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
SYS1.PROCLIB. TSO procedure
36 GY28-7199
in TSO CONTROL PROGRAM
SYS1.PROCLIB (procedure library data set)
in JOB MANAGEMENT
36 GY28-6613
SYS1.SM023
in SORT/MERGE
SYS1. SVC library
in QUEUED TELECOMM. ACCESS
modules in

33 GY28-6597
~ETHOD

SYS1.SVCLIB
in CATALOG MANAGEMENT
in INITIAL PROGRAM LOADER AND NIP
building
SVC routines in
in INTRO. TO CONTROL PROGRAM LOGIC
in MACHINE-CHECK HANDLER. M155/165
in MACHINE-CHECK HANDLER. s360 M65
in MFT SUPERVISOR
in ONLINE TEST EXECUTIVE PROGRAM

30 GY30-2002

30 GY28-6606
36 GY28-6661
36
30
31
36
31

GY28-6605
GY27-7198
GY27-7155
GY27-7236
GY28-6651

SYS1.LINKLIB - TAB

in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
in TSO CATALOG MANAGEMENT
36 GY28-6745
SYS1.SVCLIB (supervisor call library data
set)
in JOB MANAGEMENT
36 GY28-6613
SYS1.SVCLIB data set
in MACHINE-CHECK HANDLER. M135/145 30 GY27-7237
in MVT SUPERVISOR
36 GY28-6659
data control block (DCB)
entry point name of
module name for
data extent block (DEB)
entry point name of
modul e name for
SYS1.SYSJOBQE
in CONTROL PROGRAM WITH MFT
36 GY27-7128
problem program initialization routine
use of
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
SYS1.SYSJOBQE (job queue data set)
in JOB MANAGEMENT
36 GY28-6613
SYS1. TELCMLIB
in BASIC TELECOMM. ACCESS METHOD
30 GY30-2001
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
modules in
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
SYSlDIC
in COBOL-TQ-PL/l LCP

29 GY33-1007

SZKEYPCE. field in PARS~ACS
in TSO COMMAND PROCESSOR VOLI-ADD 36 GY28-6771
in TSO COMMAND PROCESSOR VOLI-CHNG 36 GY28-6771
SZNUMPCE. field in PARSMACS
in TSO COMMAND PROCESSOR VOLI-ADD 36 GY28-6771
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-6771
SZSUBPCE. field in PARSMACS
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-6771
SZUBPCE. field in PARSMACS
in TSO COMMAND PROCESSOR VOLI-ADD

36 GY28-6711

S6800 routine
in COBOL (F)

24 GY28-6382

II

!-bit
in INDEXED SEQUEN. ACCESS METHOD
T/F producing elements
in FORTRAN IV SYNTAX CHECKER PLM
definition of
effect on scan of syntactic line
T producing elements
in FORTRAN IV SYNTAX CHECKER PLM
defini tion of
effect on source Fointer
T-unnesting
in FORTRAN IV SYNTAX CHECKER PLM
definition of
example

30 GY28-6618
25 GY28-6831

25 GY28-6831

25 GY28-6831

TAB
---in MVT SUPERVISOR
36 GY28-6659
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
TAB (Transient Area Block)
in TSO CONTROL PROGRAM
36 GY28-7199
release of when user is removed
from subsystem
set nin usen when user is
restored after swap-in

450

TAB - Tables

TAB symbol
in FORTRAN IV SYNTAX CHECKER PLM

25 GY28-6831

TABBIN (binary constant limits)
in PLiI SYNTAX CHECKER PLM

29 GY33-8009

TABDEC (decimal constant limits)
---rn-PLII SYNTAX CHECKER PLM

29 GY33-8009

TABID, in control
in 'I'SO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

'l'ABLDL
---rn-MVT SUPERVISOR

36 GY28-6659

Table

~ COBOL-To-PLl1 LCP

29
COBOL verb
control block
error message
keyword
Master Flag Table (MFLG)
Master Table (MTB)
procedure-name (PARADICT)
record type
assignment address pointer (AD)
comment (CM)
condition-name (CN)
control block (RB)
entry (RE)
file (FR)
identification (PH)
limit-count (LC)
overflow-name (OV)
qualified key-name (FQ)
qualified name (RQ)
sort (SO)
special-names (SN)
value clause (RV)
reserved word
statement
in LINKAGE EDITOR (F)
31
allocation
construction and usage
in TESTRAN
37
Table, unit assignment
in S/360-1130 DATA TMN. - FORTRAN 25
'I'able allocation-IEBCOPY
in UTILITIES
32
Table allocation routine (ALLOCATE)
in LOADER
31
synopsis of
Table Area Management Executive Routines
24
in COBOL ( F)
Table Area Management Maps
24
in COBOL (F)
Table breakup parameter list
in CONTROL PROGRAM WITH MFT
36
Table breakup routine (TBR)
in CONTROL PROGRAM WITH MFT
36
Table construction techniques
in ASSEMBLER (F)
21
Table control area
(F)
PL/I
in
COMPILER
29
Table control block area
in PL/I (F) COMPILER
29
Table core
in TESTRAN
37
Table dictionary
in TESTRAN
37
Table entry subroutines
in FORTRAN IV (H) COMPILER
25
Table formats
in COBOL (F)
24
in UPDATE ANALYSIS PROGRAM
36
Table formats (Phase F7)

GY33-7007

GY28-6667
GY28-6611
GY27-7161
GY28-6614
GY28-6714
GY28-6382
GY28-6382
GY27-7128
GY27-7128
GY26-3700
GY28-6800
GY28-6800
GY28-6611
GY28-6611
GY28-6642
GY28-6382
GY28-7106

in ASSEMBLER (F)
21
external symbol dictionary (control
sections and external references)
external symbol dictionary (entry
definitions)
external symbol dictionary (dummy
reference)
literal base table
symbol table
literal entries
name entries
Table handling
in COBOL (F)
24
Table IDs
in MVT JOB MANAGEMENT
36
Table Information Blocks
in COBOL (F)
24
Table manager routines
in R£r~OTE JOB ENTRY
36
Table module
29
in PL/I SYNTAX CHECKER PLM
LEVELTAB DSECT in IKM11
Table-name operator
in FOR 'IRAN IV SYNTAX CHECKER PLM
25
Table of contents
in TCAM SERVICEABILITY AIDS
30
in TSO COMMAND PROC VOL6-TERMINAL 36
in TSO COMMAND PROCESSOR VOL6-RUN 36
Table of cross-references
in TeAM SERVICEABILITY AIDS
30
Table of logical phases
in PL/I (F) COMPILER
29
Table of message origins
in TELECOMMUNICATION ACCESS METHOD 30
Table of module register usage
in TELECOMMUNICATION ACCESS METHOD 30
Table of offsets
in BASIC TELECOMM. ACCESS METHOD
30
Table of register usage
30
in TCAM SERVICEABILITY AIDS
Table of register usage, service
aids
in TeAM SERVICEABILITY AIDS
30
Table of special characters
in BASIC TELECOMM. ACCESS METHOD
30
Table PCT
in ALGOL-TO-PL/l LCP
29
Table Processing
in COBOL (E)
24
Table queue control record (TQCR)
in CON'IROL PROGRAM WITH. MF'I'
36
Table spill
in COBOL (F)
24
Table stacking (FESTACK)
in UPDATE ANALYSIS PROGRAM
36
Table storage and construction-IEBGENER
in UTILITIES
32
Table storage-IEBGENER
in UTILITIES
32
Table store subroutine, functions of
in JOB MANAGEMENT
36
Table type
in UPDATE ANALYSIS PROGRAM
36
ALIAS
BLDL
Change
Control-card
Deletion
Force and Except
Force and Except change item
Force and Except library name
Library change
Library name
Library sequence
Tables
29
---rn-ALGOL-TQ-PL/l LCP

GY26-3700

GY28-6382
GY28-6660
GY28-6382
GY30-2005
GY33-8009
GY28-6831
GY30-2027
GY28-6776
GY28-6776
GY30-2027
GY28-6800
GY30-2029
GY30-2029
GY30-2001
GY30-2027
GY30-2027
GY30-2001
GY33-7006
GY24-5009
GY27-7128
GY28-6382
GY28-7106
GY28-6614
GY28-6614
GY28-6613
GY28-7106

GY33-7006

451
Tables
l--------------------------------------(continued)
in COBOL (F)
24 GY28-6382
BCDTBL
BSAMTB
CKPTBL
COMTBL
CONDIS
CONTBL
C1TIRTB
DBGTBL
'DEFSBS
DICOT
EACTBL
ENVTBL
ERRTBL
FNTBL
FSIGNT
GNTBL
GPLSTK
HASH

KEYTBL
LABTBL
LTLTBL
OD2TBL
PARTBL
PFMTBL
PH1ERR
PH2ERR
PH 3 ERR
PH4ERR
PH5ERR
PIOTBL
PNOUNT
PNQTBL
PNTBL
PNUTBL
POITBL
Program Global
PSGTBL
PSHTBL
PSIGNT
PTRFLS
QFILE
QITBL
QNMTBL
QRTN
QTBL
QVAR
RCDTBL
RCKTBL
RDFSTK
RLDTBL
RNMTBL
RUNTBL
RWRTBL
SPNTBL
STRING
Task Global
TRKTBL
USING
VARYTB
VIRPTR
VNTBL
XAVAL
XINTR
XSCRPT
XSSNT
in FORTRAN IV (E)
allocation
argument list
base value
BLDL
blocking
branch list
dictionary

25 GY28-6601

Tab1es - Tab1es

epilog
equivalence
forcing val ue
index mapping
message address
message length
message text
operations
overflow
patch
reset
resident
routine displacement
SEGMAL
subscript
uni t assignment
used by compiler
used by object module
in FORTRAN IV (G) COMPILER
25
base
BASE, BOTTOM, and TOP
branch
global jump
group stats
NAMELIST
POP jump
printmsg
ROLL ADR
STA RUN
unit assignment
in FORTRAN IV SYNTAX CHECKER PLM
25
action code routine
CKRACNDX
CKROPNDX
definition address table
definition load table
error messages
displacements for
list of
EXCLODTB
EXCSYNXS
MSGOOO
MASGTABLE
operator routine
translate and test
WKASERTB
WKATINUE
in FORTRAN IV-T0-PL/1 LCP
29
in GRAPHIC JOB PROCESSOR SUPPORT
36
detailed foruets and descriptions
for GFX
for GJP
in GRAPHIC SUBRTN. PACKAGE
25
buffer control
flow control
key
status
stroke
used by GSP
in LOADER
31
construction and usage
used in the CESD search
in SORT/MERGE
33
for polyphase
names
in TCAM SERVICEABILITY AIDS
30
device
section
UCB
in TSO COMMAND PROC VOL5-LISTCAT
36
in TSO COMMAND PROC VOL6-RENAME
36
Tables, control
in PL/I (F) COMPILER
29
Tables and routine directories,
introduction
in PL/I (F) COMPILER
29

GY28-6638

GY28-6831

GY33-7000
GY27-7159

GY27-7152

GY28-6714
GY28-6597
GY3o- 2027

GY28-6775
GY28-6776
GY28- 6800
GY28- 6800

Tabl.es -

452

Tape

Tables and work areas
in S/360 JOB PROCESSING 1130/2250
used by GFX
used by SGJP in Systeml360
used by SGJP in 1130
Tables built by create module-IEBDG
in UTILITIES

in TSO COMMAND PROC VOL5-0PERATCR

36 GY28-6775

TAIEPTR, field in AXPL
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

32 GY28-6614

TAIERSAV, field in TAlE
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

TABPRSG
in COBOL-TO-PL/l LCP

29 GY33-7007

TAIETGET, field in TAlE
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

TABREG (option table pointer)
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

TAKEXITS, in history
in TSO COMMAND PROC VOL6-SUBMIT

36 GY28-6776

TABREL routine
--rDCOBOL (F)

24 GY28-6382

TALL-IEKRLL
---rn FORTRAN IV (H) COMPILER

25 GY28-6642

36 GY27-7166

TABSET command processor
in CRJE PLM
36 GY30-t011
entry point code
flowchart
messages requested
microfiche directory
module description
register usage
TABSET subcommand
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
summary of operations
syntax
TABTST (PLII syntactical units)
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

TACT
in MVT SUPERVISOR

36 GY28-6659

TACTNEXT
in MVT SUPERVISOR
use of

36 GY28-6659

TAG field
---in FORTRAN IV (G) COMPILER
definition
description

25 GY28-6638

36 GY28-6659

TABEXIT subroutine
in MVT SUPERVISOR

36 GY28-6659

TABFETCH
in MVT SUPERVISOR

36 GY28-6659

TAMEIN routine
- - r DCOBOL (F)

24 GY28-6382

TAMEOP routine
- - r DCOBOL (F)

24 GY28-6382

TAMER

-rn

COBOL (F)
definition
TAMER routines
in COBOL (F)
INSERT
MOVDIC
PRIME
STATIC
TABREL
TAMEIN
TAMEOP
TBGETSPC
TBREADIC
TBSPILL
TBWRITE

24 GY28-6382
24 GY28-6382

24 GY28-6382

TAMMAD

TAlE
---rn TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6775
data area
in data area directory
in TSO TMP & SERVICE ROUTINES
36 GY28-6770
TAlE (Terminal attention interrupt element)
in TSO COMMAND PROCESSOR VOL1-ACCT 36 GY28-6771
as input to STAX attention exit
routine
fields in
size of
TAlE (Terminal Attention
Interruption Element)
in TSO CONTROL PROGRAM
36 GY28-7199
creation of
format of
initialization of

TAIEMSGL, field in TAlE

24 GY28-6382

TAMM
---rn COBOL (F)

TAHABEND subroutine
in MVT SUPERVISOR

TAIEIAD, field in TAlE
in TSO COMMAND PROC VOL5-0PERATOR

TALLY field
COBOL (F)
in sort

---rn

36 GY28-6775

--rDCOBOL (F)
~

in SORT/MERGE
logical
physical
switching, oscillating technique
table
Tape, format of records on
in EMULATOR FOR 7090/7094/709411
Tape check indicator
in EMULATOR FOR 7090/7094/709411
Tape emulation
in 7074 EMULATE FOR M/165
description
handling input errors
handling output errors
Tape Error Recovery Procedure
in EMULATOR FOR 7090/7094/709411
Tape formatting programs
in EMULATOR FOR 7090/7094/709411
description
inclusion in LINKLIB
input and output
messages
routine entry points
in 7074 EMULATE FOR M/165

24 GY28-6382
33 GY28-6597

35 GY27-7187
35 GY27-7187
GY27-7228

35 GY27-7187
35 GY27-7187

GY27-7228

453
Tape indicate flag (SBEXT1)
in 7074 EMULATE FOR M/165
Tape label
in MVT JOB MANAGEMENT
American National Standard
AVR processing of
IBM standard
nonstandard
Tape label image-IEHINITT
in UT ILIT IES
Tape latches
in 7074 EMULATE FOR M/165
Tape motion test
in ONLINE TEST EXECUTIVE PROGRAM
Tape positioning and data set
verification
in FORTRAN IV (G) COMPILER
input standard labeled tape
Open routine
output standard labeled tape
unlabeled tape
Tape postprocessor
in ~MULATOR FOR 7090/7094/709411
description
error conditions
flow of control
functions
input and output
routine descriptions
termination
Tape postprocessor program
in 7074 EMULATE FOR M/165
Tape preprocessor
in EMULATOR FOR 7090/7094/709411
description
error conditions
flow of control
functions
input and output
routine descriptions
termination
~ape preprocessor program
in 7074 EMULATE FOR M/165
Tape routines
in 7074 EMULATE FOR M/165
Data Transfer (IIOFOXFR)
flowchart
function
MOD
DIL Count Dequeuing (IIOIODDQ)
flowchart
function
MOD
DLL Count Queuing (IIOIODLQ)
flowchart
function
MOD
FSW and Post (IIOFOPST)
flowchart
function
MOD
I/O Force (IIOFORCE)
flowchart
function
MOD
Instruction Decode (IIORD)
flowchart
function
MOD
Non-data Operations (IIOND)
flowchart
function
MOD
Priority Control (IIOI7P55)
flowchart
function

GY27-7228
36 GY28-6660

Tape

Target

MOD
Priority Release (IIOI7P64)
}'LOWCHART
FUNCTION
MOD
Read operations (IIORDTR)
flowchart
function
I'40D

32 GY28-6614
GY27-7228
37 GY28-6651
25 GY2 8- 6638

35 GY27-7187

GY27-7228
35 GY27-7187

segment Forward Space and Backspa~e
(IIORDTSF)
flowchart
function
MOD
Set Density (IIODNSTY)
function
MOD
Write Operations (IIOWRTW)
flowchart
function
MOD
7074 Interruption Generator (IIOI7GEN)
flowchart
function
MOD
7074 Interruption Scheduler (IIOI7SCH)
flowchart
function
MOD
Tape techniques
in SORT/MERGE
33 GY28-6597
record arrangement in buffer
Tape volume positioning
in FOR~N IV (G) COMPILER
25 GY28-6638
end-of-volume processing
TAPEBDR switch
in ONLINE TEST EXECUTIVE PROGRAM

GY27-7228
GY27-7228

37 GY28-6651

Tapemark emulation
in 7074 EMULATE FOR M/165
creating tapemark records
reading
writing
Tapemark record
in EMULATOR FOR 7090/7094/709411
35
Tapemark records
in 7074 EMULATE FOR M/165
creating (preprocessor)
postprocessing
reading
writing
Tapemark/Summary (IOTPMK)
in EMULATOR FOR 7090/7094/709411
35
description
flowchart
Tapemark/Summary routine, Preprocessor
(IOTPMK)
in 7074 EMULATE FOR M/165
Tapemarks
in EMULA~OR FOR 7090/7094/709411
35
error in
in spanned variable-length record
format
reading
writing
TARESTRT
in MVT SUPERVISOR
Target
in ALGOL-TO-PL/l LCP
Target address
in COBOL (F)
definition

GY27-7228

GY27-7187
GY27-7228

GY27-7187

GY27-7228
GY27-7187

36 GY28-6659
29 GY33-7006
24 GY28-6382

Ii

454

Target - Task
Target fields
in PL/I SUBROUTINE LIBRARY
attributes
arithmetic
mathematical
overlap
TARGEI'- IEKPT
in FORTRAN IV (H) COMPILER
Target program
in FORTRAN IV-TO-PL/l LCP
Target program generation
in FORTRAN IV-TO-PL/l LCP
Task
---rn TSO COMMAND PROCESSOR VOL3-EDIT
definition
TASK (keyword attribute)
in PL/I SYNTAX CHECKER PLM
attribute classification
in OPTIONS attribute list
Task asynchronous exit routine
in MVT SUPERVISOR
scheduling of
Task attachment (control task)
in PL/I SUBROUTINE LIBRARY
Task communications area (TCA)
in PL/I SUBROUTINE LIBRARY
Task control block
in MVT SUPERVISOR
abnormal release of
construction of
definition of
flags
description of
format of
normal release of
queuing of
System (pseudo task)
in TSO CONTROL PROGRAM
Task control block (TCB)
in GRAPHICS ACCESS METHOD
in JOB MANAGEMENT
in MFT SUPERVISOR
address table
communications task
creation of subtask
extracting information
from
format
master scheduler
Multiple Console Support
Write-to-Log
partition
pointer to current
queue
recovery management
subtask
system error task
System Management Facility
transient area task
in PL/I SUBROUTINE LIBRARY
in TESTRAN
Task Control Block (TCB),
modifications
in EMULATOR FOR 7090/7094/709411
Task definition
in PL/I SUBROUTINE LIBRARY
Task entry (TE) block
in GRAPHICS ACCESS METHOD
Task exit
in PL/I SUBROUTINE LIBRARY
Task Global Table
in COBOL (F)
definition
format
Task hierarchy

29 GY28-6801

25 GY28-6642
29 GY33-7000
29 GY33-7000
36 GY28-6773
29 GY33-8009

36 GY28-6659
29 GY28-6801
29 GY28-6801
36 GY28-6659

36 GY28-7199
30 GY27-7113
36 GY28-6613
36 GY27-7236

29 GY28-6801
37 GY28-6611
35 GY27-7187
29 GY28-6801
30 GY27-7113
29 GY28-6801
24 GY28-6382

in PL/I SUBROUTINE LIBRARY
29 GY28- 6801
Task initialization (control task)
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Task Input/Output Table
in TSO CONTROL PROGRAM
36 GY28-7199
Task input/output table (TIOT)
in CONTROL PROGRAM WITH MF'I'
36 GY27-7128
format and description of
problem program initialization routine
use of
small partition routine use of
step deletion routine use of
step initiation routine use of
wri ter use of
in GRAPHICS ACCESS METHOD
30 GY27-7113
in INTRO. TO CONTROL PROGRAM LCGIC 36 GY28-6605
in JOB MANAGEMENT
36 GY28-6613
compression routine
construction routine
disposition
in step termination
storage requirements of
in MFT SUPERVISOR
36 GY27-7236
location of
in MVT JOB l'fJANAGcl>1EN'l'
36 GY28-6660
compression of
construction of
DISPLAY A conrr,and use of
dununy
format and descriFtion of
storage requirements of
system output writer
in ONLINE TEST EXECUTIVE PROGRAlVl
37 GY28-6651
Task invocation count (multitasking)
in PL/I SUBROUTINE LIBRARY
Task invocation count (TIC)
in PL/I SUBROUTINE LIBRARY
Task management
in CRJE PLM
in INTRO. TO CONTROL PROGRAM LOGIC
TASK option
in PL/I SUBROUTINE LIBRARY
TASK option, code bytes
in PL/I (F) COMPILER
TASK parameter in STIMER
in MFT SUPERVISOR
Task Removal routine
in MVT SUPERVISOR
description of
entry point name of
module name for
synopsis of
Task switching routine
in MVT SUPERVISOR
description of
entry point name of
flowcharts of
module name for
synopsis of
Task termination
in MACHINE-CHECK HANDLER, M135/145
as a level of recovery
as a method of recovery
methods of termination
in MACHINE-CHECK HANDLER, M155/165
in PL/I SUBROUTINE LIBRARY
abnormal
normal
Task timing
in MVT SUPERVISOR
description of
flowchart of
Task variable
in PL/I SUBROUTINE LIBRARY

29 GY28- 6801
29 GY28-6801
36 GY30-2011
36 GY28- 6605
29 GY28-6801
29 GY28- 6800
36 GY27-7236
36 GY28-6659

36 GY28-6659

30 GY27-7237

30 GY27-7198
29 GY28-6801

36 GY28-6659

29 GY28-6801

455

Task -

TBLPB3RN
in SORT/MERGE

'.rCAM

Task variable address
in PL/I SUBROUTINE LIBRARY

29 GY28-6801.

Tasking information in DSA
in PL/I (F) COMPILER

29 GY28-6800

TASKSEL subroutine
in MVT SUPERVISOR

36 GY28-6659

TBREADIC routine
in COBOL (F)

24 GY28-6382

36 GY30-2011

TBSPILL routine
in COBOL (F)

24 GY28-6382

TATTBT
in ASSEMBLER (F)

21 GY26-3700

TBWRITE routine
in COBOL (F)

24 GY28-6382

TAVTD macro
in TCAM SERVICEABILITY AIDS

30 GY30-2027

TAT
in CRJE PLM

TAXE
---rn TSO TMP & SERVICE ROUTINES
36 GY28-6770
TAXE (Terminal attention exit element)
in TSO COMMAND PROCESSOR VOL1-ACCT 36 GY28-6771
fields in
size of
used by STAX attention exit
routine
in TSO CONTROL PROGRAM
36 GY28-7199
address of
creation of
format of
initialization of
locating for attention exit
scheduling
release of
TAXEXIT
in MVT SUPERVISOR

36 GY28-6659

TAXRETRY
in MVT SUPERVISOR

36 GY28-6659

TBEG, field in COMMON
---rn TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

TBGETSPC routine
in COBOL (F)

24 GY28-6382

TBIT
---rn FORTRAN IV (H) COMPILER

25 GY28-6642

TBK
in FORTRAN IV-To-PL/1 LCP

29 GY33-7000

TBKN
in FORTRAN IV-To-PL/1 LCP

29 GY33-7000

TBKP
in FORTRAN IV-To-PL/1 LCP

29 GY33-7000

TBLCW
in FORTRAN IV-TO-PL/1 LCP

29 GY33-7000

TBLPH1AS
in SORT/MERGE

33 GY28-6597

TBLPH1RN
in SORT/MERGE

33 GY28-6597

TBLPH2AS
in SORT/MERGE

33 GY28-6597

TBLPH2RN
in SORT/MERGE

33 GY28-6597

TBLPH3AS
in SORT/MERGE

33 GY28-6597

in CONTROL PROGRAM WITH MFT

in CRJE PLM

33 GY28-6597
36 GY27-7128

36 GY30- 2011

TCA
in PL/I (F) COMPILER
TCA (Task Communications Area)
in PL/I SUBROUTINE LIBRARY
TCABEND macro instruction,
processing of
in TSO CONTROL PROGRAM
TCAM
---rn TCAM SERVICEABILITY AIDS
closedown bit
interface with TOTE
OLT library
in TSO COMMAND PROCESSOR VOL3-EDIT
TCAM (Telecommunications Access
Method)
in TSO CONTROL PROGRAM
active. indication of
failure, indication of
Message Control Program
processing for LOGON command
RMS interface with
starting of
TSO subroutines of
TCAM ABDUMP modules
in MVT SUPERVISOR
description of
entry pOint names of
flowchart of
module names for
TCAM ABEND
in MFT SUPERVISOR
entry point
flowchart
module description
module synopsis
TCAM abnormal close routine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
TCAM as a star table procedure
in TELECOMMUNICATION ACCESS METHOD
TCAM command scheduler SVC
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
TCAM control areas
in TELECOMMUNICATION ACCESS METHOD
address vector table (AVT)

29 GY28-6800
29 GY28-6801

36 GY28-7199
30 GY30-2027

36 GY28-6773
36 GY28-7199

36 GY28-6659

36 GY27-7236

30 GY30-2029

30 GY30-2029
30 GY30-2029

30 GY30-2029

I:i

456
TCAM control areas

l_~~_:~::~~~:~::~~-~::~~~-~~:~~~-:~c~~~~~~~j
channel program block (CPB)
device characteristics table
(DCT)
element request block (~RB)
invitation list
line control block (LCB)
operator control address vector
table
option characteristics table
option table
process control block (PCB)
queue control block (QCB)
resource control block (RCB)
special characters table (SCT)
station control block (SCB)
subtask control block (STCB)
terminal table
termname table
translation tables
TCAM control block linkages
in TELECOMMUNICATION ACCESS METHOD
TCAM control blocks
in TELECOMMUNICATION ACCESS METHOD
channel program block
disk data area
element request block
line control block
operator control AVT
process control block
queue control block
resource control block
station control block
subtask control block
TCAM Data Set Processor
in MVT SUPERVISOR
description of
entry point name of
flowchart of
module name for
TCAM dispatcher
in TELECOMMUNICATION ACCESS METHOD
cross reference table
elements
flowchart
library
microfiche directory
module description
queues
ready queue
register usage
subtasks
tpost principle
twait principle
TCAM dispatcher with subtask trace
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
TCAM flowcharts
in TELECOMMUNICATION ACCESS METHOD
TCAM formatted dump
in TELECOMMUNICATION ACCESS METHOD
TCAM linkages between macro
expansions and modules
in TELECOMMUNICATION ACCESS METHOD
TCAM logic
in TELECOMMUNICATION ACCESS METHOD
TCAM Message Queue Print routine
in TCAM SERVICEABILITY AIDS
entry

functions
TCAM module list by
in TELECOMMUNICATION ACCESS METHOD
TCAM opti ons
in TELECOMMUNICATION ACCBSS METHOD
TCAM queues and QCBs list
in TELECOMMUNICATION ACCESS METHOD
TCAM relationship with OS dispatcher
in TELECOMMUNICATION ACCESS METHOD
TCAM relative priorities
in TELECOMMUNICATION ACCESS METHOD
TCAM system structure
in TELECOMMUNICATION ACCESS METHOD
TCAM Trace Format routine
in TCAM SERVICEABILITY AIDS
entry
functions
TCAM-type records-IFCEREPO
in UTILITIES

30 GY30-2029
30 GY30-2029
30 GY30-2029
30 GY30-2029
30 GY30-2029
30 GY30-2029
30 GY30-2027

32 GY28-6614

TCB
30 GY30-2029
30 GY30-2029

36 GY28-6659

30 GY30-2029

30 GY30-2029

in JOB MANAGEMENT
36
in MVT SUPERVISOR
36
in ONLINE TEST EXECU'l'IVE PROGRAM
37
in TELECOMMUNICATION ACCESS METHOD 30
in TESTRAN
37
TCB (Task Control Block)
in DIRECT ACCESS DEVICE SPACE MGT. 30
in PL.lI SUBROUTINE LIBRARY
29
in TSO CONTROL PROGRAM
36
as indication of long wait
condition
changing priority of
while user is swapped out
method of removing user from
subsystem
priorities of
Ready Queue ordering
removal from Ready Queue prior to
swap-out
requeued on Ready Queue after
swap-in
TCB (Task Control Block), finding
storage keys
in MACHINE-CHECK HANDLER, M155/165 30
TCB (Task Control Block), setting it
nondispatchable
in MACHINE-CHECK HANDLER, M155/165 30
TCB address
in TSO COMMAND PROC VOL2-ALLOCATE 36
TCB fields and flags
in MVT SUPERVISOR
36
TCB table, dumroy
in INITIAL PROGRAM LOADER AND NIP 36

GY28-6613
GY28-6659
GY28-6651
GY30-2029
GY28-6611
GY28-6607
GY28-6801
GY28-7199

GY27-7198
GY27-7198
GY28-6772
GY28-6659
GY28-6661

TCBs
---rn TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
altering fields of
displaying for the tested program
TCHAR

---rn ALGOL-TO-PL/l
30 GY30-2029
30 GY30-2029
30 GY30-2029
30 GY30-2029
30 GY30-2027

LCP

29 GY33-7006

TCHNG macro expansion linkage
in TELECOMMUNICATION ACCESS METHOD 30 GY3O-2029
TCHNG service routine
in TELECOMMUNICATION ACCESS METHOD 30 GY3O-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
TCLEARQ
in TSO CONTROL PROGRAM

36 GY28-7199

457
'I'Cu.ARQ
I in TSO CONTROL PROGRAM
36 GY28-7199
L-------------------------------------{continued)
clearing I/O queues
macro instruction. function
removing wait conditions
'I'CL'\::ARQ macro
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
TCLEARQ macro instruction
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
used for error termination
TCLOS.!> routine
---rn-FORTRAN IV (G) COMPILhR
closing a data control block
TCM
in FORTRAN IV-To-PL/l LCP
'ICNC
in FORTRAN IV-TO-PL/l LCP
TCMP
in FORTRAN IV-TO-PL/l LCP

in ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

TDI
---in FORTRAN IV-TO-PL/l LCP

29 GY33-7000

in FORTRAN IV-TO-PL/l LCP

29 GY33-7000

TDMl'
in FORTRAN IV-To-PL/l LCP

29 GY33-7000

TDMV
---rn FORTRAN IV-To-PL/l LCP

29 GY33-7000

TDPSCIE
in PL/I (F) COMPILER

29 GY28-6800

TDT
---in FOR'I'RAN IV-TO-PL/l LCP

29 GY33-7000

TDTC
---rn FORTRAN IV-TO-PL/l LCP

29 GY33-7000

TDTH
---rn FORTRAN IV-TO-PL/l LCP

29 GY33-7000

TDTL
---rn FORTRAN IV-To-PL/l LCP

29 GY33-7000

TDTN
---rn FORTRAN IV-TO-PL/l LCP

29 GY33-7000

TDTR
---rn FORTRAN IV-TO-PL/l LCP

29 GY33-7000

TDTT
---rn FORTRAN IV-To-PL/l LCP

29 GY33-7000

25 GY28-6638

29 GY33-7000
29 GY33-7000
29 GY33-7000

TCOMTAB (test communication table)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
format and description of fields
initializing
TCOPY
in
'I'COPY
in

macro expansion linkage
TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
service routine
TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage

TCT
in CONTROL PROGRAM WITH MFT
36
in MVT SUPERVISOR
36
TCT (Task Control Table)
in DIRECT ACCESS DEVICE SPACh MGT. 30
TCT I/O table
in MVT JOB MANAGEMENT
36
construction of
format and description of
TCTIOT
in CONTROL PROGRAM WITH MFT

TCLEARQ - TEIiT

GY27-7128
GY28-6659
GY28-6607
GY28-6660

TDU
in FORTRAN IV-To-PL/l LCP

29 GY33-7000

TDUI
---rn FORTRAN IV-TO-PL/l LCP

29 GY33-7000

TDUL
---rn FORTRAN IV-TO-PL/l LCP

29 GY33-7000

TDUN
---rn FORTRAN IV-TO-PL/l LCP

29 GY33-7000

TECB
---rn TCAM SERVICEABILITY AIDS

30 GY30- 2027

36 GY27-7128
Technigues. method of operation
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774

TDA
in FORTRAN IV-To-PL/l LCP

29 GY33-7000
TEH

TDAH
in FORTRAN IV-To-PL/l LCP
TDAN
---rn FORTRAN IV-TO-PL/l LCP
TDAP
---rn FORTRAN IV-TO- PL/l LCP
TDCBl
in ONLINE TEST EXECUTIVE PROGRAM
EXECUTIVE PROGRAM

TDEal
in ONLINE TEST EXECUTIVE PROGRAM

29 GY33-7000

TEHA
---rn FORTRAN IV-To-PL/l LCP

29 GY33-7000

TEHE
in FORTRAN IV-To-PL/l LCP

29 GY33-7000

TEHL
---rn FORTRAN IV-To-PL/l LCP

29 GY33-7000

TEHM
---rn FORTRAN IV-TO-PL/l LCP

29 GY33-7000

TEHN
---rn FORTRAN IV-To-PL/l LCP

29 GY33-7000

TEHT
in FORTRAN IV-TO-PL/l LCP

29 GY33-7000

29 GY33-7000
29 GY33-7000
37 GY28-6651

TDCB2

---rn ONLINE TEST

in FORTRAN IV-To-PL/l LCP
29 GY33-7000

37 GY28-6651
37 GY28-6651

IIiUi

458

TELCMLIB - Terminal

TELCMLIB macro instruction
in BASIC TELECOMM. ACCESS METHOD

30 GY30-2001

Telecommunication line
in S/360 JOB PROCESSING 1130/2250 36
Telecommunications Access Method
in TSO CONTROL PROGKAM
36
Telecommunications access method (TCAM)
in TSO COMMAND PROCESSOR VOL3-~DIT 36
definition
Telecommunications control
block
in 5/360-1130 DATA TMN. - FORTRAN 25
in System/360 (GTCB)
in 113 0 (GTCOM)
Telecommunications monitor
routine (GTP01)
in s/360-1130 DATA TMN. - FORTRAN 25
description of
detection of errors by
end-of-operation processing
error processing
residence of
starting the next operation
Telecommunications On-Line Test
Executive (TOTE)
in TCAM SERVICEABILITY AIDS
30
Teleprocessing
in ONLINE TEST EXECUTIVE PROGRAM
data protection for
DCB and DEB
lines
tests
in PL/I SUBROUTINE LIBRARY
CLOSE
error handling
I/O statements
KEY FROM
KEYTO
OPEN
record size
statement validity
TELEPROCBSSING files
in PL/I SUBROU'l'INE LIBRARY
environment options
OPEN/CLOSh
Teleprocessing-type records-IFCEREPO
in UTILITIES
ThMP AND CONST roll
---rn FORTRAN IV (G)
description
in Allocate
in Exit
TEMP DATA NAME roll
in FORTRAN IV (G)
ThMP NALVlE. roll
in FORTRAN IV (G)
description
in Parse
TEMP PNTR roll
in FORTRAN IV (G)
TJ::MP POLISH roll
in FORTRAN IV (G)
TEMP roll
in FORTRAN IV (G)

COMPILER

GY27-7166
GY28-7199
GY28-6773

GY27-7161

GY27-7161

in PL/I (F) COMPILER
Temporary descriptors
in PL/I (F) COMPIL~R
Temporary linked addresses
in I.INKAGE EDI'I'OR (F)
Temporary relocation constant
in LINKAGE EDITOR (F)
added to SRC
computation of
Temporary Result Descri~tor Triples
(TMPD)
in PL/l (F) COMPILER
Temporary storage and constants
in FORTRAN IV (G) COMPILER
description
position in object module
Temporary Storage cells
in COBOL (F)
Temporary Storage-2 cells
in COBOL (F)
Temporary workspace
in PL/I (F) COMPILER

29 GY28-6800
29 GY28-6800
31 GY28-6667
31 GY28-6667

29 GY28-6800
25 GY28-6638

24 GY28-638..1
24 GY28-6382
29 GY28-6800

T~MPSPRE

in MACHINE-CHECK HANDLER, s360 M65 31 GY27-7155
GY30-2027

37 GY28-6651

Tense
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
TENTXT-IEKVTN

~FORTRAN IV (H) COMPILER

TIfQ.

25 GY28-6642

in FORTRAN IV-To-PL/l LCP

29 GY33-7000

TEQH
in FORTRAN IV-TO-PL/l LCP

29 GY33-7000

Tl!.QN
in FORTRAN IV-TO-PL/l LCP

29 GY33-7000

TEQP
in FORTRAN IV-To-PL/l LCP

29 GY33-7000

Tl!:R.COD
in COBOL (F)

24 GY28-6382

TER.CRD
in COBOL (F)

24 GY28-6382

29 GY28-6801

29 GY28-6801

32 GY28-6614
25 GY28-6638

COMPILER

25 GY28-6638

COMPILER

25 GY28-6638

COMPILER

25 GY28-6638

COMPILER

25 GY28-6638

COMPILER

25 GY28-6638

Temporary
in FORTRAN IV (H) COMPILER
25 GY28-6642
in common expression elimination
storage allocation in register
assignment
Temporary data sets
in MVT JOB MANAGEMENT
36 GY28-6660
Temporary description stack

TERM/NO TERM option
in LOADER
TERM option
in LINKAGE EDITOR (F)
function
in final processing
processing
Terrr,inal
in TSO COMMAND PROC VOL5-0PERATOR
attention interrupt element
monitor program (TMP)
user's eligibility
in TSO COMMAND PROC VOL6-WHEN/END
in TSO COMMAND PROCESSOR VOL3-EDIT
definition
in TSO COMMAND PROCESSOR VOL4-EXl!:C
Terminal, allocate request for
in TSO COMMAND PROC VOL2-ALLOCATE
Terminal, operations with
in TSO COMMAND PROCESSOR VOL6-SEND
Terminal attention
in TSO COMMAND PROCESSOR VOL1-ACCT
exit element
interrupt element
processing of

31 GY28-6714
31 GY28-6667

36 GY28- 6775

36 GY28-6776
36 GY28-6773
36 GY28-6774
36 GY28-6772
36 GY28-6776
36 GY28-6771

459
Terminal Attention Exit Element
in TSO CONTROL PROGRAM
36 GY28-7199
Terminal Attention Exit Element (TAXE)
in TSO TMP & SERVICE ROUTINES
36 GY28-6770
format
use
Terminal Attention Interrupt Element (TAlE)
in TSO TMP & SERVICE ROUTINES
36 GY28-6770
format
use
Terminal Attention Interruption
Element
in TSO CONTROL PROGRAM
36 GY28-7199
Terminal command default table
in CRJE PLM
36 GY30-2011
field descriptions
general description
map
microfiche directory.
TERMINAL command processor
in TSO COMMAND PROC VOL6-TERMINAL 36 GY28-6776
flowcharts
functions
keyword parameters
method of operation diagrams
operation of
operational considerations
physical characteristics
storage requirements
summary
Terminal command processors
in CRJE PLM
36 GY30-2011
Terminal commands
in CRJE PLM
36 GY30-2011
Terminal communication
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
use of PUTLINE
in TSO COMMAND PROC VOL6-RENAME
36 GY28-6776
through PUTLINE
Terminal data set
in LINKAGE EDITOR (F)
31 GY28-6667
Terminal directory
in REMOTE JOB ENTRY
36 GY30-2005
Terminal directory search routine
36 GY30-2005
in REMOTE JOB ENTRY
Terminal element
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
Terminal I/O
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
Terminal I/O controller (TIOC)
in TSO COMMAND PROC VOL6-TERMINAL 36 GY28-6776
Terminal I/O performed by service
routines
in TSO COMMAND PROC VOL5-LISTCAT
36 GY28-6775
Terminal identification
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Terminal Input/Output Coordinator
in TSO CONTROL PROGRAM
36 GY28-7199
Terminal input queue, clearing
in TSO COMMAND PROC VOL5-LISTCAT
36 GY28-6775
Terminal Job Identification
in TSO CONTROL PROGRAM
36 GY28-7199
Terminal message service routine,
invocation of
in TSO COMMAND PROC VOL1-SUBRTNS
36 GY28-6771
Terminal monitor program
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
attention exit routine
control received from
definition
functions performed by
STAI exit routine
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
attention exit routines
definition
functions

Terminal - Terminal
STAI exit routine
in TSO CONTROL PROGRAM
36
Terminal Monitor Program (TMP)
in TSO COMMAND PROC VOL1-BROADCAST 36
attention exit routine
definition
functions performed by
STAI exit routine
in TSO COMMAND PROC VOL1-SUBRTNS
36
attention exit routine
definition
functions performed by
STAI exit routine
in TSO CO~~ND PROC VOL2-ALLOCATE 36
in TSO COMMAND PROC VOL2-DELETE
36
definition
functions performed by
attention exit routine
STAI exit routine
in TSO COMMAND PROC VOL4-LISTALC
36
entry from
in TSO COMMAND PROC VOL4-LISTBC
36
enters (attaches) LISTBC
function
interfaces
parameter bit pointer
reference to PLM
STAI exit routine
in TSO COMMAND PROC VOL5-LISTCAT
36
attention exit routine, functions
of
description of
functions of
in TSO COMMAND PROC VOL6-PROFlLE
36
attention exit routine
definition of
functions performed by
linkage with
return code passed to
STAI exit routine
table built by
user of UPT
in TSO COMMAND PROC VOL6-PROTECT
36
attention exit routine
definition
functions performed by
STAX macro instruction issued
by
in TSO COMMAND PROC VOL6-lU.NAME
36
attention exit routine
definition
functions performed by
STAI exit routine
in TSO COMMAND PROC VOL6-TERMlNAL 36
attention exit routine
definition
functions performed by
STAI exit routine
in TSO COMMAND PROC VOL6-WHEN/END 36
in TSO COMMAND PROCESSOR VOLl-ACCT 36
in TSO COMMAND PROCESSOR VOL1-ADD 36
definition
functions
attention exit routine
STAI exit routine
in TSO COMMAND PROCESSOR VOLl-LIST 36
attention exit routine
definition
functions performed by
in TSO COMMAND PROCESSOR VOL2-CALL 36
definition
functions performed by
attention exit routine
STAI exit routine
in TSO COMMAND PROCESSOR VOL3-EDIT 36
definition

GY28-7199
GY28-6771

GY28-6771

GY28-6772
GY28-6772

GY28-6774
GY28-6774

GY28-6775

GY28-6776

GY28- 6776

GY28-6776

GY28-6776

GY28-6776
GY28-6771
GY28- 6771

GY28-6771

GY28-6772

GY28-6773

Termina1 - Termination
Terminal Monitor Program (TMP)
I in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
L--------------------------------------(continued)
operation of
return of control to
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
attention exit routine
definition
entry form
functions performed by
STAI exit routine
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
enters HELP in command mode
general information
STAI exit routine
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
attention exit routine
definition
functions performed by
STAI exit routine
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
attention exit routine
definition
functions performed by
STAI exit routine
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
attention exit
functions
invoking processor
passing parameter list
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description of
receiving control from
returning control to
Terminal name table
in TCAM SERVICEABILITY AIDS
30 GY30-2027
Terminal operations
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
Terminal queues
in REMOTE JOB ENTRY
36 GY30-2005
Terminal Status Block
in TSO CONTROL PROGRAM
36 GY2B-7199
Terminal status macro instructions
in TSO COMMAND PROC VOL6-TERMINAL 36 GY28-6776
issued by TERMINAL
Terminal status routines
36 GY28-7199
in TSO CONTROL PROGRAM
'Ierminal table
in QUEUED TELBCOMM. ACCESS METHOD 30 GY30-2002
format
field and description
in REMOTE JOB ENTRY
36 GY30-2005
in TCAM SERVICEABILITY AIDS
30 GY30-2027
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cascade entry
data area layout
definition
distribution entry
group entry
line entry
logtype entry
process entry
single entry
Terminal test header analysis routine
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
chart
Terminal test routine charts
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
for 1030
for 2740
for 1050
for 1060
for 2B48/2260
Terminal user
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773

460
definition
Terminal user, communicates with
in TSO COMMAND PROCESSOR VOLI-CHNG
Terminal user block
in CRJE PLM
field descriptions
genera 1 description
map
microfiche directory
Terminal user interface
in TSO COMMAND PROCESSOrt VOL4-EXEC
Terminal user messages
in CRJE PLM
Terminals, communications with
in TSO COMMAND PROC VOL2-DELETE
Terminals available to TSO
in TSO COMMAND PROC VOL4-LISTBC
Terminals used by TSO
in TSO CONTROL PROGRAM
TERMINAT (release data area)
in PL/I SYNTAX CHECKER PLM

36 GY2B-6771
36 GY30-2011

36 GY2B-6774
36 GY30-2011
36 GY28-6772
36 GY28-6774
36 GY28-7199
29 GY33-8009

Terminate
in TSO COMMAND PROC VOL6-WHEN/END 36
TERMINATE COBOL Compilation (Phase TRM)
in COBOL (E)
24
T~MINATE PHASE routine
in FORTRAN IV (G) COMPILER
25
Terminate request
in S/360 JOB PROCESSING 1130/2250 36
Terminating ACCOUNT wode processing
in TSO COMMAND PROCESSOR VOLI-ACCT
Terrr~nating broadcast data set
processing
in TSO COMMAND PROC VOLI-BROADCAST
Terminating communication
in s/360-1130 DATA TMN. - FORTRAN
general information about
in System/360
in 1130 system
Terminating error
in ALGOL (F) COMPILER
in PL/I SYNTAX CHECKER PLM
in TSO COMMAND PROC VOLI-DELETE
in TSO COMMAND PROCESSOR VOLI-CHNG
Terrr~nating GFX
in S/360 JOB PROCESSING 1130/2250
Terminating OLTEP
in ONLINE TEST EXECUTIVE PROGRAM
Terminating SGJP
in S/360 JOB PROCESSI~G 1130/2250
in the System/360
in the 1130
Terminating statements
in PL/I SUBROUTINE LIBRARY
Termi na ti on
in CONTROL PROGRAM WITH MFT
alternate step deletion routine
job deletion routine
small partition
step deletion routine
in INITIAL PROGRAM LOADER AND NIP
MFT
MVT with Model
multiprocessing

GY28-6776
GY24-5009
GY28-663B
GY27-7166

36 GY28-6771
36 GY28-6771
25 GY27-7161

26
29
36
36

GY33-BOOO
GY33-8009
GY2B-6771
GY28-6771

36 GY27-7166
37 GY2B-6651
36 GY27-7166

29 GY28-6BOl
36 GY27-7128

36 GYLB-6661

MVT

in INTRO. TO CONTROL PROGRAM LOGIC
abnormal
of I/O operations
in JOB MANAGEMENT
in MACHINE-CHECK HANDLER, M155/165
in MFT SUPERVISOR
abnormal

36 GY28-6605
36 GY28-6613
30 GY27-7198
36 GY27-7236

461
Termination
I in MFT SUPERVISOR
36 GY27-7236
I
abnormal
L--------------------------------------(continued)
intercepting
scheduling
normal
in MVT JOB MANAGENENT
36 GY28-6660
abnormal
initiating task
job and step
reading task
system task
via CANCEL command
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
PL/I program
system
abnormal
normal
in TSO COMMAND PROC VOL6-PROTECT
36 GY28-6776
in TSO COMMAND PROC VOL6-SUBMIT
36 GY28-6776
in 7074 EMULATE FOR M/165
GY27-1228
emulator
postprocessor
preprocessor
Termination. abnormal
in ONLINE TEST ~XECUTIVE PROGRAM
37 GY28-6651
in SVC 59 operation diagram
STAE macro instruction for
in TSO COMMAND PROC VOL1-DELETE
36 GY28-6771
in TSO COMMAND PROC VOL5-LISTCAT
36 GY28-6775
in TSO COMMAND PROCESSOR VOLI-LIST 36 GY28-6771
Termination. abnormal (ABEND)
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
Termination. normal
in TSO COMMAND PROCESSOR VOL6-SI:."'NJ) 36 GY28-6776
Termination. of statements
in PL/I (F) COMPILER
29 GY28-6800
Termination. task and system
in MACHINE-CHECK HANDLER. M155/165 30 GY27-7198
Termination (MCH)
in MACHINE-CHECK HANDLER. s360 M65 31 GY27-7155
theory
Termination and warning messages
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
Termination call
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Termination conditions-IEBCOPY
in UTILITIES
32 GY28-6614
'I'ermination error messages
in PL/I (F) COMPILER
29 GY28-6800
Termination functions application
program
in TELECOMMUNICATION ACCESS l'JETHOD 30 GY30-2029
Termination fUIlctions MCP
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Termination necessary
in MACHINE-CHECK HANDLER. M155/165 30 GY27-7198
Termination of compilation
in FORTRAN IV (E)
25 GY28-6601
abnormal
normal
in PL/I (F) COMPILER
29 GY28-6800
Termination of compiler
in FORTRAN IV (G) COMPILER
25 GY28-6638
in FORTRAN IV (H) COMPILER
25 GY28-6642
Termination of EDIT program operation
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
Termination of load module
execution
in FORTRAN IV (E)
25 GY28-6601
Termination of SYSPRINT
in PL/I SUBROU'I'INE LIBRAR Y
29 GY28-6801
Termination Phase (IEX51)
in ALGOL (F) COMPILER
26 GY33-8000
Description

Termination - TEST
Flowcharts
Terwination procedures
in GRAPHIC SUBRTN. PACKAGE
Terrrination procedures-IEHATLAS
in UTILITIES
Terrr'ination processing
in TSO COMMAND PROC VOL4-LISTBC
Termination processing-IEHMOVE
in UTILITIES
Terwination routine
in UPDATE ANALYSIS PROGRAM
Termination subroutines
in GRAPHIC SUBRTN. PACKAGE

25 GY27-7152
32 GY28-6614
36 GY28-6774
32 GY28- 6614
36 GY28-7106
25 GY27-7152

Terminator module
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
Terminology
in TSO COMMAND PROCESSOR VOLl-ADD 36 GY28-6771
in TSO COMMAND PROCESSOR VOLI-CHNG 36 GY28-6771
Termname table (IEDQTNT)
in TELECO~~NICATION ACCESS METHOD 30 GY30-2029
Termname table code
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
microfiche directory
module description
register usage
Terrnname table sort routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
TERMPARM (putline parameter list)
in TSO COMMAND PROC VOL5-0UTPUT
description
in operation
TERMREQ subroutine
in TSO COMMAND PROC VOL2-ALLOCATE
flowchart
function
operation
Terms Handler (IIOTERMS)
in 7074 EMULATE FOR M/165
flowchart
function
MOD
Terms used during com~ilation
in PL/I (F) COMPILER
Test action macro-instructions
--rn TESTRAN
Test and set operators
in FORTRAN IV (H) COMPILER
Test and store routine
in JOB MANAGEMENT
TEST AT macro-instruction
in TESTRAN
Test attribute
in TESTRAN
TEST attribute
in LINKAGE EDITOR (F)
function
in input processing
in processing example
in TSO COMMAND PROCESSOR VOL7-TEST
as used by SVC 61 routine

36 GY28-6775

36 GY28-6772

GY27-7228

29 GY28-6800 •
37 GY28-6611
25 GY28-6642
36 GY28-6613
37 GY28-6611
37 GY28-6611
31 GY28-6667

36 GY28-6777

462

Test - TESTOCT

Test close routine
in TESTRAN
Test close routine (editor)
in TESTRAN
TEST command
in TSO COMMAND PROC VOL5-LISTCAT
uses of
in TSO COMMAND PROCESSOR VOL1-ACC'!'
ThST command, description of
use
in TSO CONTROL PROGRAM
TEST command processor
in TSO COMMAND PROC VOL1-BROADCAST
in TSO COMMAND PROC VOL1-SUBRTNS
in TSO COMMAND PROC VOL2-DELETE
in TSO COMMAND PROC VOL4-LISTALC
in TSO COMMAND PROC VOL5-LISTDS
in TSO COMMAND PROC VOL6-PROFILE
in TSO COMMAND PROC VOL6-PROTECT
in TSO COMMAND PROC VOL6-RENAME
in TSO COMMAND PROC VOL6-TERMINAL
in TSO COMMAND PROCESSOR VOL1-ADD
in TSO COMMAND PROCESSOR VOL1-CHNG
in TSO COMMAND PROCESSOR VOL2-CALL
in TSO COMMAND PROCESSOR VOL4-EXEC
in TSO COMMAND PROCESSOR VOL4-FREE
in TSO COMMAND PROCESSOR VOL6-RUN
in TSO COMMAND PROCESSOR VOL6-SEND
in TSO COMMAND PROCESSOR VOL6-TIMb
in TSO TMP & SERVICE ROUTINES
parameter list for
passing control to
Test communication table (TCOMTAB)
in TSO COMMAND PROCESSOR VOL7-TEST
format and description of fields
initializing
Test-condition, processing
in COBOL-TO-PL/1 LCP
Test control macro-instructions
in TESTRAN
Test definition
in ONLINE TEST EXECUTIVE PROGRAM
description of
operator use of
redefinition of
specification of
Test device field, checking
in TCAM SERVICEABILITY AIDS
Test event control block (TECB)
in ONLINE TEST EXECUTIVE PROGRAM
Test field
in TCAM SERVICEABILITY AIDS
Test Initialization
in TSO COMMAND PROCESSOR VOL7-TEST
Test Loader
in TSO COMMAND PROCESSOR VOL 7-TEST
Test loop
in TCAM SERVICEABILITY AIDS
TEST macro-definition
in TESTRAN
Test Mainline
in TSO COMMAND PROCESSOR VOL7-TEST
Test Name Routine (SGTST)
in S/360 JOB PROCESSING 1130/2250
description of
as a LOCAL subroutine
TEST OPEN macro-instruction
in TESTRAN
Test open routine (editor)
in TESTRAN
Test open routines
in TESTRAN
Test output data
in TESTRAN
Test parameter list (TPL)
in TSO COMMAND PROCESSOR VOL7-TEST

37 GY28-6611
37 GY28-6611
36 GY28-6775
36 GY28-6771
36 GY28-7199
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36

GY28-6771
GY28-6771
GY28-6772
GY28-6774
GY28-6775
GY28-6776
GY28-6776
GY28-6776
GY28-6776
GY28-6771
GY28-6771
GY28-6772
GY28-6774
GY28-6774
GY28-6776
GY28-6776
GY28-6776
GY28-6770

36 GY28-6777

29 GY33-7007
37 GY28-6611

use by Initialization to set fields
test cowwunication table
format and description of fields
TEST Parameter List (TPL)
in TSO TMP & SbRVICE ROU'I'INES
36
format
use (refer to the publication I Ill'.
System/360 Operating system:
Sharing Option:
Volume 7 - TEST,GY28-6777)
Test parameters
in ONLINE TEST EXECUTIVE PROGRAM
37
TEST PDE
in TSO COMMAND PROCESSOR VOL6-RUN 36
TEST processing
in TSO COMMAND PROCESSOR VOL4-HELP 36
Test request message (TRM)
30
in TCAM SERVICEABILITY AIDS
Test section list (SECLST)
in ONLINE TEST EXECUTIVE PROGRAM
37
construction of
description of
illustration of
in common area
in operation diagram
Test section routines
in ONLINE TEST EXECUTIVE PROGRAM
37
Test sections
37
in ONLINE TEST EXECUTIVE PROGRAM
Test system
in ONLINE TEST EXECUTIVE PROGRAM
37
Test volumes
in ONLINE TEST EXECUTIVE PROGRAM
37
Test when routine
in TESTRAN
37

in

GYL8-6770

GY28-6651
GY28-6776
GY28-6774
GY30-2027
GY28-6651

GY28-6651
GY28-6651
GY28-6651
GY28-6651
GY28-6611

Test's work area (TSTCWORK)
---rn-TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
format and description of fields
pointer to in test communication table
(WORKAREA)

37 GY28-6651
TESTBUF label
in TSO COMMAND PROCESSOR VOL6-RUN
in flowchart
30 GY30-2027

.

37 GY28-6651
30 GY30-2027
36 GY28-6777
36 GY28-6777
30 GY30-2027
37 GY28-6611
36 GY28-6777
36 GY27-7166

37 GY28-6611

TESTDSP routine
in MVT SUPERVISOR

36 GY28-6776

36 GY28-6659

Testing, for consistency of attributes
in PL/I (F) COMPILER
29
Testing a byte logical variable
in FORTRAN IV (ll) COMPILER
25
Testing a read operation for completion
in IBM 1419/1275 DEVICE DEP. BSAM 30
Testing input/output status
in S/360-1130 DATA TMN. - FORTRAN 25
general information about
in System/360
in 1130 system
Testing loop option
in ONLINE TEST EXECUTIVE PROGRAM
37
Testing parameters
in GRAPHIC SUBRTN. PACKAGE
25
Testing symbol dictionary
in LINKAGE EDITOR (F)
31

GY28-6800
GY28-6642
GY21-0012
GY27-7161

GY28-6651
GY27-7152
GY28-6667

TESTKEY
in COBOL-TO-PL/l LCP

29 GY33-7007

TESTLENG subroutine of IKAJCL
in GRAPHIC JOB PROCESSOR SUPPORT
in S/360 JOB PROCESSING 1130/2250

36 GY27-7159
36 GY27-7166

TESTOCT
in MVT SUPERVISOR

36 GY28-6659

37 GY28-6611
37 GY28-6611
37 GY28-6611
36 GY28-6777

463
TESTOcr

~--~~-~~-~~:~~~~~~~------------------:1c~~~~~~~~~
use of

TESTPDE, field in RUNPDL
in TSO COMMAND PROCESSOR VOL6-RUN
TESTRAN
in ASSEMBLER (F)
in INTRO. TO CONTROL PROGRAM LOGIC
SVC routine
TESTRAN, definition of
in TESTRAN
TESTRAN interpreter
in MVT SUPERVISOR
entry point name(s) of
module names for
use by the common subroutines of
Contents supervision
use by the Model 91
Program Interruption Handler
use by the OVerlay Supervisor
Text
---rn COBOL-TO-PL/l LCP
internal
Internal 1 Text
Internal 2 Text
in FORTRAN IV (E)
in FORTRAN IV (H) COMPILER
additive text, elimination of
block, definition of
blocking
conversion, phase 25
data
define file
entry
phase 20 format
types
format
generation subroutines
information, phase 25
intennediate
namelist
normal. phase 10
in LOADER
input record fonnat
loading
processing
record processing
Text, annotated dump
in PL/I (F) COMPILER
TEXT, length of
in TSO COMMAND PROC VOL5-0PERATOR
Text, mess age
in TESTRAN
Text, of error messages
in PL/I (F) COMPILER
Text, problem program
in TESTRAN
Text (TXT) record
in BASIC DIRECT ACCESS METHOD
contents
dense
format
in load module
in object module
loose
processing (IEWLMTXT)
description of
chart
synopsis
operation diagrams
and RLD processor (IEWLMRAT)
Text additions

36 GY2S-6776
21 GY26-3700
36 GY2S-6605
37 GY2S-6611
36 GY2S-6659

29 GY33-7007

25 GY2S-6601
25 GY2S-6642

31 GY2S-6714

29 GY2S-6S00
36 GY2S-6775
37 GY2S-6611
29. GY2S-6S00
37 GY2S-6611
30 GY2S-6617

TES'l'O~

- Text

in PL/I (F) COMPILER
29 GY2S- 6S00
BUY statements
I/O statements
SELL statements
statements within statements
temporary storage
unbrella symbol
Text and RLD processor (IEWLMRAT)
in BASIC DIRECT ACCESS METHOD
30 GY2S-6617
chart
synopsis
Text blocks
in PL/I (F) COMPILER
29 GY2S-6800
chaining
control
markers
release
size
space allocation
spilled
symbolic name
Text buffer
in BASIC DIRECT ACCESS METHOD
30 GY2S-6617
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Text buffer chains
in FORTRAN IV (E)
25 GY2S-6601
construction of for SYSUT1 and SYSUT2
data sets
format of
manipulation of by perfonnance
module
use of
Text chain
in PL/I (F) COMPILER
29 GY2S-6S00
Text code bytes
in PL/I (F) COMPILER
29 GY2S-6S00
first level table
is pseudo-code
on entry to translator phases
second level table
Text contents
in BASIC DIRECT ACCESS METHOD
30 GY28-6617
Text control block
in BASIC DIRECT ACCESS METHOD
30 GY28-6617
Text control table
in BASIC DIRECT ACCESS METHOD
30 GY2S-6617
Text formats
in PL/I (F) COMPILER
29 GY2S-6S00
absolute code
after read-in phase
in pseudo-code
internal
triples
Text I/O control table
in BASIC DlREcr ACCESS METHOD
30 GY28-6617
Text I/O table
in BASIC DIREcr ACCESS METHOD
30 GY2S-6617'1i
contents
format
making an entry in
use during address assignment
use during intermediate output
processing
use during processing
use during text processing
use in ordering text
use in reading from SYSUT1
Text Insertion Parameter List (TXINPARM)
in TSO TMP & SERVICE ROUTINES
36 GY2S-6770
Text length (RSM-LSM+1)
in PL/I SYNTAX CHECKER PLM
29 GY33-S009
Text mode
in TCAM SERVICEABILITY AIDS
30 GY3 0- 2 027
Text note list
in BASIC DIRECT ACCESS METHOD
30 GY2S-6617
contents

Text -

464

TDIB

Text note list
I in BASIC DIRECT ACCESS METHOD
30 GY28-6617
L--------------------------------------(continued)
format
introduction to
making an entry in
reading from SYSUT1
use during text processing
use of
Text of mess ages
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
in TSO COMMAND PROC VOL5-LISTCAT
36 GY28-6775
Text read routine (RDTXT)
in BASIC DIRECT ACCESS METHOD
30 GY28-6617
chart
in program organization
Text scratch storage
in PL/I (F) COMPILER
29 GY28-6800
Text string processing
in PLII (F) COMPILER
29 GY28-6800
Text write routine (on SYSLMOD) (WRTTXT)
in BASIC DIRECT ACCESS METHOD
30 GY28-6617
chart
in program organization
Text write routine (on SYSUT1) (TXTBUF)
in BASIC DIRECT ACCESS METHOD
30 GY28-6617
chart
synopsis
TEXTLENG, field in COMMON
in TSO COMMAND PROC VOL5-0PERAXOR

36 GY28-6775

TGT
in COBOL (F)

24 GY28-6382

TGTINT routine
COBOL (F)

--rn-

24 GY28-6382

THEN
--"Tn ALGOL-TO-PLl1 ICP
THEN-clause
in PL/I SYNTAX CHECKER PLM

29 GY33-7006

Third Level Interrupt Handling
Subrouti ne (ILSO 3)
in S/360 JOB PROCESSING 1130/2250
Third Level Tables
in PL/I (F) COMPILER

36 GY27-7166
29 GY28-6800

Thorough checking
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

Three-dimensional array
in FORTRAN IV (E)
array displacement computation
of
overflow table entry for

29 GY33-8009

25 GY28-6601

Threshold
in QUEUED TELECOMM. ACCESS METHOD 30 GY3o- 2002
Threshold mode
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
Threshold value
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237

~,

field in EXITWORK
in TSO COMMAND PROC VOL5-0PERAXOR

36 GY28-6775

~,

field in EXITWORK
in TSO COMMAND PROC VOL5-0PERATOR

TFM
--in FORTRAN IV-To-PL/1 LCP

Thunk
---rn
ALGOL
(=

(F) COMPILER
26 GY33-8000
actual parameter code sequence)

36 GY28-6775
TIA table
in TESTRAN

37 GY28-6611

29 GY33-7000
TIB

TFMF
--"Tn FORTRAN IV-To-PLl1 LCP
TFML
--"Tn FORTRAN IV-To-PLl1 LCP

in COBOL (F)

24 GY28-6382

29 GY33-7000
TIC (Task Invocation Count)
in PL/I SUBROUTINE LIBRARY

29 GY28-6801

29 GY33-7000
TIM

TFMR
--"Tn FORTRAN IV-To-PLl1 LCP

in FORTRAN IV-TO-PL/1 LCP

29 GY33-7000

29 GY33-7000

TGET
--"Tn TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
definition
TGET 'macro instruction and routine)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description of macro operands
description of routine
TGET/TPUT operation,
in TSO CONTROL PROGRAM
36 GY28-7199
during scheduling of user
attention exits
general description
interface with TCAM
interface with terminal
LWAIT affect on
Main Control routine
OWAIT affect on
QTI P routine
SVC 93
use with BSAM/QSAM
TGEl'ADDR (field in test communication
table)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description of

Time
----in MFT SUPERVISOR
elapsed
of day
of expiration
in TSO COMMAND PROC VOL5-0PERATOR
connected
CPU
logon
resident
in TSO COMMAND PROC VOL6-PROTECT
CPU
resident
total CPU
in TSO COMMAND PROCESSOR VOL6-TIME
CPU
elapsed
execution
LOGON
session

36 GY27-7236

36 GY28-6775

36 GY28-6776

36 GY28-6776

TIME

in FORTRAN IV-TO-PL/1 LCP
in MFT SUPERVISOR
entry point
flowchart
functional description
module description

29 GY33-7000
36 GY27 -7 236

465
TIME
I in MFT SUPERVISOR
36 GY27-7236
L--------------------------------------(continued)
module synopsis
Time, CPU
in TSO COMMAND PROC VOL4-LISTALC
36 GY28-6774
Time, processing
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
TIME BIN macro instruction
in CONTROL PROGRAM WITH MFT
36 GY27-7l28
TIME built-in function
in PL/I SUBROUTINE LIBRARY
29 GY28-680l
TIME command
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
TIME command processor
in TSO COMMAND PROC VOL1-BROADCAST 36 GY28-677l
in TSO COMMAND PROC VOL1-SUBRTNS
36 GY28-677l
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
in TSO COMMAND PROC VOL4-LISTALC
36 GY28-6774
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
in TSO COMMAND PROC VOL6-PROFILE
36 GY28-6776
in TSO COMMAND PROC VOL6-PROTECT
36 GY28-6776
in TSO COMMAND PROC VOL6-RENAME
36 GY28-6776
in TSO COMMAND PROC VOL6-TERMINAL 36 GY28-6776
in TSO COMMAND PROCESSOR VOL1-ACCT 36 GY28-677l
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-677l
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
in TSO TMP & SERVICE ROUTINES
36 GY28-6770
loaded by Terminal Monitor Program
Time delay QCB
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Time delay routine
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
Time delay subtask
in TELECOMMUNICATION ACCESS MErHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
Time fields
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
Time interval, wait
in TCAM SERVICEABILITY AIDS
30 GY30-2027
Time intervals for I/O operations
in MVT JOB MANAGEMENT
36 GY28-6660
TIME macro
in PL/I SUBROUTINE LIBRARY
29 GY28-680l
TIME macro instruction
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
Time name table
in TSO COMMAND PROC VOL4-LISTALC
36 GY28-6774
format
usage
Time-of-day
in TSO CONTROL PROGRAM
36 GY28-7l99
calculat ion of
use of by Driver
use of by Trace Writer
Time-of-Day Clock
in MFT SUPERVISOR
36 GY27-7236
in MVT JOB MANAGEMENT
36 GY28-6660
setting
Time of Day Clock Damage
in MACHINE-CHECK HANDLER, M155/l65 30 GY27-7l98
Time of expiration
in MVT SUPERVISOR
36 GY28-6659
Time out and data check for auto poll
routine
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
chart

TIME - Tillie

Time out routine
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
chart
Time queue
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
Time routine
in MVT SUPERVISOR
36 GY28-6659
description of
entry point name(s) of
flowchart of
module name for
synopsis of
Time Sharing Communication Vector
Table
in TSO CONTROL PROGRAM
36 GY28-7l99
Time Sharing Control Program (TSC)
interface
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
Time Sharing Control Region
in TSO CONTROL PROGRAM
36 GY28-7l99
Time Sharing Control Task
in TSO CONTROL PROGRAM
36 GY28-7l99
Time sharing control task (TSC)
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
definition
relationship of EDIT to
Time Sharing destination scheduler
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
Time Sharing Dump Control Block
in TSO CONTROL PROGRAM
36 GY28-7199
Time Sharing Event Control Block
in TSO CONTROL PROGRAM
36 GY28-7199
Time Sharing Interface Area
in TSO CONTROL PROGRAM
36 GY28-7199
Time Sharing Interface Control Block
in TSO CONTROL PROGRAM
36 GY28-7199
Time Sharing Interface Program
in TSO CONTROL PROGRAM
36 GY28-7199
Time Sharing Job Block
in TSO CONTROL PROGRAM
36 GY28-7199
Time sharing job block (TJB)
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
Time Sharing Job Block Extension
in TSO CONTROL PROGRAM
36 GY28-7199
Time sharing option
in MVT JOB MANAGEMENT
36 GY28-6660
timer queue element
in TSO CONTROL PROGRAM
36 GY28-7199
Time Sharing Option (TSO)
in MVT SUPERVISOR
36 GY28-6659
Dequeue routine with
description of
End-of-Task routine with
Fetch and BLDL processing with
issuing ATTACH with
issuing CH~P with
flowchart of
issuing STATUS
local system queue area
POST with TJID
Stage 3 Exit Effector with
sub pool allocation
timer interruption with
time sharing link pack area extention
TSEVENT macro instruction
TSO Dispatcher
user exit routine with
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
definition

Ii

466

Time - Timer

'rime Sharing Option (TSO)
I in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
L--------------------------------------(continued)
relationship of EDIT to
Time sharing option routines
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Time Sharing Save Area
in TSO CONTROL PROGRAM
36 GY28-7199
Time sharing scheduler
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
Time-slice
in MFT SUPERVISOR
36 GY27-7236
control element
format
processing
in TSO CONTROL PROGRAM
36 GY28-7199
available execution time
calculation of
establishing value for
definition of
major
calculation of
definition of
minor
calculation of
definition of
Time-slice control element
in MVT SUPERVISOR
36 GY28-6659
pointers of
creation of
format of
Time slicing
in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
option
parameter
Time-slicing feature
in MVT SUPERVISOR
36 GY28-6659
Attach routine with
description of
flowchart of
Chap routine with
description of
flowchart of
description of
Dispatcher routine with
description of
flowchart of
EOT routine with
description of
Time stamp
in TCAM SERVICEABILITY AIDS
30 GY30-2027
Time stamp address
in MVT JOB MANAGEMENT
36 GY28-6660
Time stamp routine
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
chart
Time subtask
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
TIMEDAT routine
in FORTRAN IV (G) COMPILER

25 GY28-6638

TIMEMSG (primary message buffer)
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
contents of
use of
Timeout
in ONLINE TEST EXECUTIVE PROGRAM
in TCAM SERVICEABILITY AIDS

37 GY28-6651
30 GY30-2027

TIMEOUT keyword
in TSO COMMAND PROC VOL6-TERMINAL
number
parameter

36 GY28-6776

Timer

---rn

INITIAL PROGRAM LOADER AND NIP 36
active
option
prefix field
in MFT SUPERVISOR
36
enqueue subroutine
entry point
flowchart
expiration processing
interval
measuring intervals
queue maintenance
second-level interruption
handler
entry point
flowchart
functional description
module description
module synopsis
units
values
binary
decimal
microsecond
in ONLINE TEST EXECUTIVE PROGRAM
37
for channel quiescing
for tape motion test
Timer Damage
in MACHINE-CHECK HANDLER, M155/165 30
Timer /external
in MFT SUPERVISOR
36
first-level interruption
handler
entry pOint
flowchart
functional description
module description
module synopsis
interruption
New PSW
Old PSW
Timer interruption handling
in MVT SUPERVISOR
36
Timer interval
in TCAM SERVICEABILITY AIDS
30
Timer queue
in MVT SUPERVISOR
36
positioning of elements on
purging elements from
Timer queue element
in MVT SUPERVISOR
36
abnormal release of
construction of
defini tion of
format of
normal removal from timer queue
in TSO CONTROL PROGRAM
36
Timer queue element (TQE)
in CONTROL PROGRAM WITH MFT
36
small partition module use of
step deletion routine use of
in MFT SUPERVISOR
36
creating
format of
initializing
midnight
pointer to
synchronized
ten minute
Timer Second-Level Interruption Handler

GY28-6661

GY27-7236

GY28-6651

GY27-7198
GY27-7236

GY28-6659
GY30-2027
GY28-6659

GY28-6659

GY28-7199
GY27-7128
GY27-7236

467
Timer Second-Level Interruption Handler
l--------------------------------------(continued)
in MVT SUPERVISOR
36 GY28-6659
description of
entry point names of
flowchart of
module name for
synopsis of
Timer Second Level Interruption
Handler (IEAQTDOO)
in TSO CONTROL PROGRAM
36 GY28-7199
Timer SLIH
in MVT SUPERVISOR
36 GY28-6659
Timer work area
in CONTROL PROGRAM WITH MFT
36 GY27-7128
problem program interface routine use
of
step deletion routine use of
step initiation routine use of
TIMERC
in LINKAGE EDITOR (F)
31 GY28-6667
TINE SB UF
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
Timing
in MVT SUPERVISOR
36
job step
task
Timing control table
in MFT SUPERVISOR
36
in MVT SUPERVISOR
36
Timing control table (TCT)
in CONTROL PROGRAM WITH MFT
36
in MVT JOB MANAGEMENT
36
format and description of
Timing control task input/output table
(TCTIOT)
in CONTROL PROGRAM WITH MFT
36
TIML
in FORTRAN IV-To-PL/1 LCP

GY27-7236
GY28-6659
GY27-'7128
GY28-6660

GY27-7128

29 GY33-7000
36 GY28-6776

TIMT
in FORTRAN IV-TO-PL/1 LCP

29 GY33-7000

TIOCBUF (TIOC Buffer Format), format
of
in TSO CONTROL PROGRAM
TIOCRPT (TIOC Reference Pointer
Table)
in TSO CONTROL PROGRAM
address of
format of
initialization of
TIOT
in CONTROL PROGRAM WITH MET
in JOB MANAGEMENT

in ONLINE TEST EXECUTIVE PROGRAM
in glossary
TIOT (Task Input/Output Table)
in DIRECT ACCESS DEVICE SPACE MGT.
restoring to pre-ISAM Allocate
use of with ISAM Allocate
in INTRO. TO CONTROL PROGRAM LOGIC
TIOT (Task Input/Output Table), swap
data set ddnames
in TSO CONTROL PROGRAM
TIOT Search (IIOSRCHT), function of
in 7074 EMULATE FOR M/165
TISA
in INDEXED SEQUEN. ACCESS METHOD

TMGDS

37 GY28-6651
30 GY28-6607
36 GY28-6605
36 GY28-7199
GY27-7228
30 GY28-6618

TITLE

---rn

ASSEMBLER (F)
TITLE (keyword option)
in PL/I SYNTAX CHECKER PLM
in OPEN statement
subroutine LINE (IKM22)
TITLE option
in PL/I SUBROUTINE LIBRARY

21 GY26-3700
29 GY33-8009

29 GY28-6801

TITLEB

GY28-6659

TIMOUT
---rn-TSO COMMAND PROC VOL6-TERMINAL
field name in PDL

TIOC (terminal I/O controller)
----in TSO COMMAND PROC VOL6-TERMINAL
TIOC (Terminal Input/Output
Coordinator)
in TSO CONTROL PROGRAM
general description of
operation of
TIOC Buffer Format
in TSO CONTROL PROGRAM
TIOC Reference Pointer Table
in TSO CONTROL PROGRAM

Timer -

36 GY28-6776
36 GY28-7199

----rrlASSEMBLER

(F)

TJB (Time Sharing Job Block)
---in TSO CONTROL PROGRAM
assigning to user
format of
initialization of
TJBX (Time Sharing Job Block
Extension)
in TSO CONTROL PROGRAM
format of
initialization of
TJID (Terminal Job Identification)
----in TSO CONTROL PROGRAM
assignment to user
during Logon processing
method of removing user from
subsystem
release of when user
terminates
use of
Driver
RCT
Trace writer
TSIP
TSO Dispatcher
when user switches regions
in PL/I SYNTAX CHECKER PLM

21 GY26-3700
36 GY28-7199

36 GY28-7199

36 GY28-7199

29 GY33-8009111iJ

36 GY28-7199
36 GY28-7199

TLABEL card
---rn-EMULATOR FOR 7090/7094/709411

35 GY27-7187

TMCTADDR, in SVCPTRS
in TSO COMAND PROC VOL2-CNCL/STATUS36 GY28-6772
36 GY28-7199
TMCTPT p code
~n QUEUED TELECOMM. ACCESS METHOD
definition
location

36 GY28-6659
30 GY30-2002

in CONTROL PROGRAM WITH MFT
in MVT SUPERVISOR
TQE (Timer Queue Element)
in TSO CONTROL PROGRAM
for TSO time slices
processing of
when time interval expires
while user is swapped
out
when user is removed from
subsystem
when user is restored to

36 GY27-7128
36 GY28-6659
36 GY28-7199

Ij

470

TQE - TRAILER

TQE (Timer Queue Element)
I in TSO CONTROL PROGRAM
36 GY28-7199
I
processing of
l--------------------------------------(continued)
subsystem

termination of
TRACEOUT data set
in PL/I (F) COMPILER
Tracer routine
in TESTRAN

Trace
in MFT SUPERVISOR
36
routine
table
TRACE
in COBOL (F)
24
in LINKAGE EDITOR (F)
31
Trace Control Block
in TSO CONTROL PROGRAM
36
Trace core
in TESTRAN
37
Trace data set
in TSO CONTROL PROGRAM
36
format of
information provided by
initialization of
Trace Data Set Processor
36
in TSO CONTROL PROGRAM
function of
output format
TRACE/FLOW facilities
in PL/I (F) COMPILER
29
Trace/flow markers
in PL/I (F) COMPILER
29
Trace interrupt routine
37
in TESTRAN
TRACE macro-definition
37
in TESTRAN
TRACE macro-instruction
37
in TESTRAN
Trace mode switch
in TESTRAN
37
TRACE option
in FORTRAN IV (G) COMPILER
25
TRACE/PATCH option
in PL/I (F) COMPILER
29
Trace routine
in MVT SUPERVISOR
36
entry point names of
function of
module name for
synopsis of
in PL/I (F) COMPILER
29
Trace routine (editor)
in TESTRAN
,37
Trace routine (IITTRC)
in EMULATOR FOR 7090/7094/7094II
35
Trace start routine
in TESTRAN
37
Trace stop
in TESTRAN
37
Trace stop routine (editor)
in TESTRAN
37
TRACE subroutine
in COBOL (F)
24
Trace table
in MVT SUPERVISOR
36
format of
in TESTRAN
37
Trace tables
in TELECOMMUNICATION ACCESS METHOD 30
line I/O interrupt trace table
subtask trace table
Trace Writer
in TSO CONTROL PROGRAM
36
active indication
calculation of wait time
function of
general description
statistics collected by

Tracing routine for 1130
in S/360-1130 DATA TMN. - FORTRAN

GY27-7236

GY28-6382
GY28-6667
GY28-7199
GY28-6611
GY28-7199

GY28-7199

GY28-6800
GY28-6800
GY28-6611
GY28-6611
GY28-6611
GY28-6611
GY28-6638
GY28-6800
GY28-6659

GY28-6800
GY28-6611
GY27-7187
GY28-6611
GY28-6611
GY28-6611
GY28-6382
GY28-6659
GY28-6611
GY30-2029

GY28-7199

29 GY28-6800
37 GY28-6611
25 GY27-7161

Track, shared
---rn INDEXED SEQUEN. ACCESS ~iliTHOD 30 GY28-6618
Track address, relative
in TSO COMMAND PROCESSOR VOLI-ADD 36 GY28-6771
Track allocation table
in CRJE PLM
36 GY30-2011
Track analysis-IBCDASDI
in UTILITIES
32 GY28-6614
Track balance-IEBCOPY
in UTILITIES
32 GY28-6614
Track balance routine (SVC 25-IGC0002E)
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
Track chain
in CRJE PLM
36 GY30-2011
Track chaining-ATIAS
in UTILITIES
32 GY28-6614
Track-descriptor field-ATLAS
in UTILITIES
32 GY28-6614
Track erase routine (SVC 25-IGC0002E)
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
Track index
in INDEXED SEQUEN. ACCESS METHOD
30 GY28-6618
BISAM processing
description
format
load mode processing
Track Index Save Area (TISA)
in INDEXED SEQUEN. ACCESS METHOD
30 GY28-6618
Track number
in ALGOL-TO-PL/l LCP
29 GY33-7006
Track overflow
in INPUT/OUTPUT SUPERVISOR
30 GY28-6616
abnormal end appendage
Create-BDAM Write routine
end-of-block routine
erase routine
error processing
introduction to
stage 2 Open executors
stage 3 Open executor
in SEQUENTIAL ACCESS METHODS
30 GY28-6604
Track overflow-ATLAS
in UTILITIES
32 GY28-6614
Track-overflow channel prograrn-IEBCOPY
in UTILITIES
32 GY28-6614
Track stacking
in CONTROL PROGRAM WITH MFT
36 GY27-7128
in MVT JOB MANAGEMENT
36 GY28-6660
description of
initiator use of
queue management use of
specification of
use in region management
use in I/O device allocation
Tracking symbol
in GRAPHIC SUBRTN. PACKAGE
25 GY27-7152
Tracks required for assigning queue macro
space
in MVT JOB MANAGEMENT
36 GY28-6660
Trailer labels, 7094, writing
in EMULATOR FOR 7090/7094/7094II
tape postprocessor
tape preprocessor
TRAILER Routines
in COBOL (E)

35 GY27-7187

24 GY24- 5009

471
Transaction data set-IEBUPDAT
in UTILITIES

32 GY28-6614

Transfer control (XCTL) table
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
in FORTRAN IV (G) COMPILER
25 GY2B-6638
Transfer from REAL to INTEGER
in ALGOL-To-PL/1 LCP
29 GY33-7006
Transfer of control
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Transfer on Channel in Operation routine
UITTCHITO)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
description
flowchart
Transfer on Channel not in Operation
routine (IITCHITN)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
description
flowchart
Transfer on End-of-File Instruction routine
(IITCHITF)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
des cript ion
flowchart
Transfer on Redundancy Instruction routine
(IITCHITR)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
description
flowchart
Transfer Trap mode
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
trap handling
7094 Load simulation
Transfer traps
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
Transfer vector
in PL/I (F) COMPILER
29 GY28-6800
to control routines
Transfer vector modules
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Transfer vector table
in S/360-1130 DATA TMN. - FORTRAN 25 GY27-7161
TRANSFORM
in COBOL (F)
in COBOIrTo-PL/1 LCP

24 GY28-6382
29 GY33-7007

Transformation subscripts
in PLII (F) COMPILER

29 GY28-6800

TRANSID
in LOADER

31 GY28-6714

Transient
in TELECOMMUNICATION ACCESS METHOD
TRANSIENT (keyword attribute)
in PL/I SYNTAX CHECKER PLM
attribute classification
in OPEN statement
Transient area
in CRJE PLM
in INTRO.' TO CONTROL PROGRAM LOGIC
definition of
I/O supervisor
SVC
in MACHINE-CHECK HANDLER, M155/165
in MFT SUPERVISOR
entry point
deferring requests fo_
input/output error
loading task
flowchart
refresh routine
request queue
SVC

30 GY30-2029
29

GY33~8009

36 GY30-2011
36 GY28-6605

30 GY27-7198
36 GY27-7236

Transaction - Transient
Transient area, storage
requirements
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
Transient Area (MCH)
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
Transient Area Availability Check routine
in MVT SUPERVISOR
36 GY28-6659
description of
entry point name(s) of
flowchart of
mod ule name for
synopsis of
Transient area block
in MVT SUPERVISOR
36 GY28-6659
in TSO CONTROL PROGRAM
36 GY28-7199
Transient area control table (TACT)
in MVT SUPERVISOR
36 GY28-6659
format of
Transient Area Exit routine
in MVT SUPERVISOR
36 GY28-6659
description of
entry point name(s) of
flowchart of
mod ule name for
synopsis of
Transient Area Fetch routine
in MVT SUPERVISOR
36 GY28-6659
description of
entry point name (s) of
flowchart of
module name for
synopsis of
Transient area fetch task
in MVT SUPERVISOR
36 GY28-6659
Transient area fetch TCBs
in MVT SUPERVISOR
36 GY28-6659
entry point name(s) of
function of
mod ule name for
Transient area handler
in MVT SUPERVISOR
36 GY28-6659
Transient Area Handler Queues
in TSO CONTROL PROGRAM
36 GY28-7199
processing of
when user is removed from
subsystem
when user is restored
Transient area I/O blocks (lOBs) and
associated transient area blocks
in MVT SUPERVISOR
36 GY28-6659
entry point name(s) of
module name for
Transient area of the MCH Resident
Area
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
Transient Area Refresh routine
in MVT SUPERVISOR
36 GY28-6659
description of
entry point name (s) of
flowchart of
module name for
synopsis of
Transient Area Refresh routine
(IEAQrR02), use of
in TOO CONTROL PROGRAM
36 GY28-7199
Transient area routines
in QUEUED TELECOMM. ACCESS METHOD 30 GY30-2002
Transient area user count
in MVT SUPERVISOR
36 GY28-6659
address of
definition of
Transient Area XCTL routine
in MVT SUPERVISOR
36 GY28-6659
description of
entry point name(s) of
flowchart of

472

Transient - Transmit
Transient Area XCTL routine
I in MVT SUPERVISOR
36 GY28-6659
l--------------------------------------(continued)
module name for
synopsis of
Transient manager
in ONLINE TEST EXECUTIVE PROGRAM
31 GY28-6651
discussion of
in control of program structure
in illustration
in operation diagram
residence of
Transient module generation
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
Transient modules
in MACHINE-CHECK HANDLER, M155/165 30 GY27-1198
Transient modules of
MCH/85
in MACHINE-CHECK HANDLER, M135/145 30 GY21~1237
Transient queue management routines
in CONTROL PROGRAM WITH MFT
36 GY21-1128
in MVT JOB MANAGEMENT
36 GY28-6660
Transient queue manager
in TSO COMMAND PROC VOL5-0tJrPUT
36 GY28-6115
Transient queue manager (SVC 90)
in JOB MANAGEMENT
36 GY28-6613
Transient reader
in CONTROL PROGRAM WITH MFT
36 GY21-1128
TRANSIENT SEQUENTIAL RECORD files
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Transient work area
in FORTRAN IV (E)
25 GY28-6601
required for control program
Translate (IECTTRNS) routine
in BASIC TELECOMM. ACCESS METHOD
description
logic flow
Translate and test table-IEBTCRIN
in UTILITIES
Translate buffer routine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
TRANSLATE built-in function
in PL/I (F) COMPILER
Translate routine
in QUEUED TELECOMM. ACCESS METHOD
chart
Translate table
in ASSEMBLER (F)
in CRJE PLM
in ONLINE TEST EXECUTIVE PROGRAM
for EBCDIC test definition
in operation diagram
Translation
in EMULATOR FOR 1090/1094/1094I1
data
dual character
input
output
input data
,output data
using compatibility feature
instructions
in LOADER
of IDs in ID/length list
routine (TRANSID)
flowchart of
synopsis of
in PL/I SYNTAX CHECKER PLM

debugging hints for
into tokens
Translation code, line
in TELECOMMUNICATION ACCESS METHOD
Translation control table
in FORTRAN IV (H) COMPILER
format of
Translation of data text
in LINKAGE EDITOR (F)
Translation of input IDs
in BASIC DIRECT ACCESS METHOD
Translation service routine
in TSO COMMAND PROCESSOR VOL3-EDIT
Translation table
in BASIC DIRECT ACCESS METHOD
format
introduction to
production of
in FORTRAN IV (H) COMPILER
format of
making on entry in
relation to translation control
table
in PL/I (F) COMPILER
Translation table, TCAM
in TELECOMMUNICATION ACCESS METHOD
Translation tables
in TELECOMMUNICATION ACCESS METHOD
Translator error
in EMULATOR FOR 7090/1094/709411
Translator logical phase
in PL/I (F) COMPILER
generic phase
stacker phase

30 GY30-2029
25 GY28-6642
31 GY28-6667
30 GY28-6611
36 GY28-6113
30 GY28-6611

25 GY28-6642

29 GY28-6800
30 GY30-2029
30 GY30-2029
35 GY21-1181
29 GY28-6800

30 GY30-2001

32 GY28-6614
30 GY30-2029

29 GY28-6800
30 GY30-2002
21 GY26-3100
36 GY30-2011
31 GY28-6651

35 GY21-1181

31 GY28-6114

29 GY33-8009

Transmission control unit (TCU)
in TELECOMMUNICATION ACCESS METHOD
Transmission errors
in s/360 JOB PROCESSING 1130/2250
Transmission line, enabling
in TELECOMMUNICATION ACCESS METHOD
Transmission of data
in EMULATOR FOR 7090/1094/109411
at interlocking point
delayed through IODELAY command
initiation of
Transmission of data between
System/360 and 1130
in S/360 JOB PROCESSING 1130/2250
Transmission status
in S/360-1130 DATA TMN. - FORTRAN
definition of
of mainline program
restoring for System/360
mainline program
restoring for 1130 mainline
program
saving of in System/360
saving of in 1130
Transmissive instructions
in FORTRAN IV (G) COMPILER
TRANSMIT condition
in PL/I SUBROUTINE LIBRARY
TRANSMIT condition test
in PL/I SUBROUTINE LIBRARY
Transmit End, use of in 1130
in S/360-1130 DATA TMN. - FORTRAN
Transmit Initial, use of in
1130
in s/360-1130 DATA TMN. - FORTRAN
Transmit output module
in CRJE PLM
entry point code

30 GY30-2029
36 GY21-1166
30 GY30-2029
35 GY21-1187

36 GY27-1166
25 GY21-1161

25 GY28-6638
29 GY28-6801
29 GY28-6801
25 GY21-7161
25 GY27-7161
36 GY3Q-2011

473

Transmi t - TRM

Transmit output module
I in CRJE PLM
36 GY30-2011
L--------------------------------------(continued)
flowchart
messages requested
microfiche directory
module description
register usage
TRANSMITCHAR
in COBOIrTo-PL/1 LCP
29 GY33-7007
TRANSMITPAR
in COBOL-TO-PL/1 LCP
29 GY33-7007
TRANSMI TSERIAL
in COBOIrTo-PL/1 LCP
29 GY33-7007
Transmitters, record I/O
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Transmitting data
in S/360-1130 DATA TMN. - FORTRAN 25 GY27-7161
general information about
in System/360
in 1130 system
TRANSMSG switch
in ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

- - i n COBOL (E)

24 GY24-5009

Transparency feature
in S/360-1130 DATA TMN. - FORTRAN

25 GY27-7161

TRLR
---rn COBOL (E)

24 GY24-5009

TREEFLG, field in CFLAGS
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
Triple names
in PL/I (F) COMPILER
Triples
in PL/I (F) COMPILER
ASSIGNMENT
format
MULTIPLE ASSIGNMENT
Pl'CH
SPECIAL ASSIGNMENT
when generated
Triplet
in LINKAGE EDITOR (F)

31 GY28-6667

TRKOFL (ENVIRONMENT option)
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

TRKTBL tab! e
----rflCOBOL (F)

24 GY28-6382

29 GY28-6800
29 GY28-6800

TRL

Transparent transmission CCW
building routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage

TRLRA

~ COBOL (E)

24 GY24-5009

TRLRBR
--rDCOBOL (E)

24 GY24-5009

TRLRDG
--rDCOBOL (E)

24 GY24-5009

TRLRH

TRANS1
----rflCOBOL (E)

24 GY24-5009

Trap Simulation routine, handling of traps
by
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
Trap Simulation routine (IITTRP)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
description
flowchart
Trap trigger
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
Traps
in EMULATOR FOR 7090/7094/709411
TRC
--in PL/I SYNI'AX CHECKER PLM

35 GY27-7187
29 GY33-8009

TRCB (Trace Control Block), format

Of

in TSO CONTROL PROGRAM

36 GY28-7199

TRCHGE, field in CTRLTAB
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
Tree (structure of UADS)
---rn TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771
buffer
search for
Tree address
in SORT/MERGE
33 GY28-6597
Tree notation, balanced
in LINKAGE EDITOR (F)
31 GY28-6667
Tree structure
in SORT/MERGE
33 GY28-6597
in TSO COMMAND PROCESSOR VOLl-ADD 36 GY28-6771
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

-rn

COBOL (E)

24 GY24-5009

TRLRM
in COBOL (E)

24 GY24-5009

TRLRM1
----rflCOBOL (E)

24 GY24-5009

TRLRO
-rn
COBOL

(E)

24 GY24-5009

TRLROK
-rilCOBOL (E)

24 GY24-5009

TRM (test request message)
in TeAM SERVICEABILITY AIDS
TRM Analysis module
in TeAM SERVICEABILITY AIDS
entry
functions
TRM Analysi s module
in TCAM SERVICEABILITY AIDS
entry
functions
TRM Analysis module
in TCAM SERVICEABILITY AIDS
entry
functions
TRM prefix characters
in TCAM SERVICEABILITY AIDS
TRM prompter
in TCAM SERVICEABILITY AIDS
TRM Prompter module
in TCAM SERVICEABILITY AIDS
entry
functions
TRM Prompter module
in TCAM SERVICEABILITY AIDS

30 GY30-2027
30 GY30-2027

30 GY30- 2027

30 GY30-2027

30 GY3Q-2027
30 GY3O-2027
30 GY30-2027

30 GY30-2027

Ii

474

TRM - TSXP

TRM Prompter module
I in TCAM SERVICEABILITY AIDS

30 GY30-2027

L---------~----------------------------(continued)

entry
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
entry
functions
TRM queue
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
TRNSLATE macro instruction
in BASIC TELECOMM. ACCESS METHOD
Trouble module
in CRJE PLM

30 GY30-2001
36 GY30-2011

TRTTAB
--rilCRJE PLM

36 GY30-2011

True name correspondence-IEBCOMPR
in UTILITIES
True name table
in TSO COMMAND PROC VOL5-LISTCAT
description of
in TSO COMMAND PROC VOLS-LISTDS
data area format
in directory
TRUNC function
in FORTRAN IV-TO-PL/1 LCP
TRUNC macro instruction. processing
of
in TSO CONTROL PROGRAM
TRUNC routines
in INPUT/OUTPUT SUPERVISOR
description of
introduction to
exchange buffering
simple buffering

32 GY28-6614
36 GY28-6775
36 GY28-6775

29 GY33-7000

30 GY28-6616

29 GY28-6801

TRUSE table

--rn LINKAGE

EDITOR (F)

TSB (Terminal Status Block)
---in TSO CONTROL PROGRAM
address of
format of
initialization of
TSB output area
in TSO COMMAND PROC VOL6-TERMINAL

36 GY28-7199
36 GY28-7199

TSCE
--rn MVT SUPERVISOR

36 GY28-6659

TSCVT (Time Sharing Communication
Vector Table)
in TSO CONTROL PROGRAM
format of
initialization of

36 GY28-7199

TSDMP (Time Sharing Dump Control
Block)
in TSO CONTROL PROGRAM
address of
format of
initialization of

36 GY28-7199

TSECB (Time Sharing Event Control
Block). format of
in TSO CONTROL PROGRAM

36 GY28-7199

TSEVENT
in TSO CONTROL PROGRAM
36 GY28-7199
Driver processing of
Trace Writer use of entry
codes
TSIP processing of
use in subsystem
communication
TSEVENT macro instruction
in TSO COMMAND PROCESSOR VOL6-TlME 36 GY28-6776

31 GY28-6667

TS CVT (time sharing communications vector
table)
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
TSABEND macro instruction
in TSO CONTROL PROGRAM
process ing of
use of by TIOC

36 GY28-7199

36 GY28-7199

Truncated text
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
Truncation (fixed/varying strings)
in PL/I SUBROUTINE LIBRARY

termination of
abnormal
TSC Parameter List
in TSO CONTROL PROGRAM
format of
use in subsystem initialization
by
Driver
swap routines
TIOC
TSC
TSC region
in TSO CONTROL PROGRAM
obtaining
TSC Table, format of
in TSO CONTROL PROGRAM

36 GY28-7199

36 GY28-7199

36 GY28-6776

TSC - i n TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
TSC (Time Sharing Control Task)
in TSO CONTROL PROGRAM
36 GY28-7199
determining functions to be
performed
general description
irivoked by Initiator
level of control
operation

TSIA (Time Sharing Interface Area)
in TSO CONTROL PROGRAM
format of
use of
TSICB (Time Sharing Interface
Control Block), format of
in TSO CONTROL PROGRAM

36 GY28-7-199

36 GY28-7199

TSINPUT
in TSO CONTROL PROGRAM
36 GY28-7199
QTIP processing
TCAM processing (IEDAYI)
TSINPUT QCB
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
TSINPUT routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
TSIP (Time Sharing Interface
Program)
in TSO CONTROL PROGRAM
establishing new time slice

36 GY28-7199

475
TSIP (Time Sharing Interface
Program)
in TSO CONTROL PROGRAM
36 GY28-7199
l--------------------------------------(continued)
general description
interface with Driver
interface with TSO
Dispatcher
invalid entry to
processing of Driver return
codes
Statistics Collection
routine
use of data by Trace Writer
use of input

I

TSLOTS
---rn-PLII (F) COMPILER

29 GY28-6800

TSMAX
--rn
COBOL

24 GY28-6382

(F)

TSO in TSO COMMAND PROCESSOR VOL3-EDIT
in TSO COMMAND PROCESSOR VOL4-HELP
command language
service routines
us er' s region
TSO (Time Sharing Option),
definition of
in TSO CONTROL PROGRAM
TSO (Time Sharing Option)
Subsystem
in MACHINE-CHECK HANDLER, M155/165
Analysis, IGFMCHF6
flowchart
module description
TSO abend interface routine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
TSO asynchronous time delay removal
routine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
TSO attention routine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
TSO buffer management support
in TELECOMMUNICATION ACCESS METHOD
TSO carriage subroutine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
TSO control program
in TSO CONTROL PROGRAM
communication within
compatibility with OS/360 MVT

36 GY28-6773
36 GY28-6774

36 GY28-7199
30 GY27-7198

30 GY30-2029

30 GY30-2029

30 GY30-2029

30 GY30-2029
30 GY30-2029

36 GY28-7199

'lSIP - 'lSO

components of
definition of
environmental characteristics
functions of
major interfaces of
implicit (TCB Ready Queue)
MVT and TSO
TSO and TMP
operation of major
components
restrictions and limitations
termination of
TSO default service routine
in TSO COMMAND PROC VOL6-RENAME
TSO Dispatcher,
in TSO CONTROL PROGRAM
changing priorities of
background, TSO or TSO
region
dispatching new task
general description
interface with Driver and
TSIP
interface with OS
Dispatcher
operation
processing region
modification
re-ordering TCB Ready Queue
TSO Dump routines
in TSO CONTROL PROGRAM
TSO foreground job ID
in MVT JOB MANAGEMENT
TSO hangup routine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
TSO INMSG/OUTMSG linker
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
TSO IOHALT routine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
TSO line management support
in TELECOMMUNICATION ACCESS METHOD
TSO logon routine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description
register usage
TSO MCP closedown processing support
in TELECOMMUNICATION ACCESS METHOD
TSO message generation routine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
flowchart
library
microfiche directory
module description

36 GY28-6776
36 GY28-7199

36 GY28-7199
36 GY28-6660
30 GY3O-2029

30 GY30-2029

30 GY30-2029

....
30 GY30-2029
30 GY30-2029

30 GY30-2029
30 GY30-2029

E

TSO - TSTAQUAL
TSO message generation routine
I in TELECOMMUNICATION ACCESS MEl'HOD 30 GY30-2029
l--------------------------------------(continued)
register usage
TSO message handling
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
buffer management support
line management support
MCP closedown processing support
queue management support
TSO OUTPUT routine
in INPUT/OUTPUT SUPPORT
30 GY28-6609
cross reference table
flowchart
library
microfiche directory
module description
register usage
TSO Parm Data Area
in TSO CONTROL PROGRAM
36 GY28-7199
invalid or missing parameters and
values
modules to be loaded into Link
Pack Area Extension
parameters and values used by
Driver
SYS1.PARMLIB parameters and
values
TSO queue management support
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
TSO recovery location
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
TSO region
in TSO CONTROL PROGRAM
36 GY28-7199
active indication
initializing
logging user into
general description
obtaining ID for
obtaining space for
release of
removing user from
restoring user to
specifying new size for
starting
stopping
switching user into another
region
termination of
by RMS
TSO routines
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
TSO service routine
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771
TSO service routine (IKJPUTL)
in TSO COMMAND PROCESSOR VOL6-TIME 36 GY28-6776
TSO service routines
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
TSO simulated attention routine
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
cross reference table
flowchart
library
microfiche directory
module description
register usage
TSO subsystem
in TSO CONTROL PROGRAM
36 GY28-7199
active indication
direct access storage
failure of
after initialization
during initialization
indications of
function of
indication ready to accept

476
terminal jobs
initialization,
failure during, indications
of
Driver
dump ro utine
RCT
TIOC
general description of
overview of
START command
rejection
successful com~letion,
indications of
Driver
dump routine
swap routine
levels of control wi thin
main control routines
overview of
main storage map of
minimum machine configuration
requirements
operation of major components
Driver
Logon/Logoff scheduling
Task
overview of
RCT
Subroutines of TCAM
TIOC
TSC
terminal requirements
termination of
time slicing
transmission control units
TSO task for swapping
in MVT JOB MANAGEMENT
TSO terminating task
in MVT JOB MANAGEMENT
TSO termination via LOGOFF
in MVT JOB MANAGEMENT
TSO TIOC edit routine
in TELECOMMUNICATION ACCESS METHOD
cross reference table
TSO user's region
in TSO COMMAND PROCESSOR VOL2-CALL
TS OUT PUT
in TSO CONTROL PROGRAM
TeAM processing
QTIP processing

36 GY28-6660
36 GY28-6660
36 GY28-6660
30 GY30-2029
36 GY28-6772
36 GY28-7199

TSP
in LINKAGE EDITOR (F)
TSSAVE (Time Sharing Save Area),
format of
in TSO CONTROL PROGRAM

31 GY28-6667

36 GY28-7199

TST
in LINKAGE EDITOR (F)

31 GY28-6667

TSTADDR (field in test communication table)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description of
TSTANSPL (field in test communication
table)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description of
TSTAQUAL (field in test communication
table)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description of

477
TSTCOND
in COBOL-TO-PL/1 LCP

29 GY33-7007

TSTCPECB (field in test communication
table)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description of
TSTCURCT (field in test communication
table)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description of
TSTCURLD (field in test communication
table)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description of
TSTCWORK (Test's work area)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description and format of
pointer to in test communication table
(WORKAREA)
TSTDCB (field in test communication table)
---rn-TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description of
TSTDDM (field in test communication table)
---rn-TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description of
TSTDEBAD (test DEB address)
in ONLINE TEST EXECUTIVE PROGRAM
TST~XPAN

37 GY28-6651

TSTCORD - TUCBAD2
TSTSVCQ (field in test communication table)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description of
TSTTRN (field in test communication table)
---rn-TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description of
TS 2 MAX
---rn-COBOL (F)
TTIMER
---rn-MFT SUPERVISOR
entry point
flowchart
functional description
module description
module synopsis
TTIMER macro instruction
in CONTROL PROGRAM WITH MFT
small partition routine use of
step deletion routine use of
in JOB MANAGEMENT
in MVT JOB MANAGEMENT
use by Attach routine
TTIMER routine
in MVT SUPERVISOR
description of
entry point name(s) of
flowchart of
module name for
synopsis of
TTOPEN routines
---rn-TESTRAN

24 GY28-6382
36 GY27-7236

36 GY27-7128
36 GY28-6613
36 GY28-6660
36 GY28-6659

37 GY213-6611

(field in test communication

table)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description of
TSTGO (also TSTGO + 4, TSTGO + 6) (fields
in test communication table)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY2S-6777
description of
TSTLNG field in E01DATDF
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
TSTMTASK (field in test communication
table)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description of
TSTOP1
---rn-ASSEMBLER (F)

21 GY26-3700

TSTORGS
in COBOL (E)

24 GY24-5009

TSTRETRY (field in test communication
table)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description of

TTR

---in DIRECT ACCESS DEVICE SPACE MGT.
Protect processing
in XCTL tab le
in TSO COMMAND PROC VOL5-0UTPUT
in IKJEFF64
in IKJEFF66
in operation
TTR, pointer to
in TSO COMMAND PROC VOL2-DELETE
TTR assignment routine
in TSO COMMAND PROCESSOR VOL3-EDIT
error and exceptional conditions
method of operation diagram
TTR list
in BASIC DIRECT ACCESS METHOD
contents
creation of
writing on SYSLMOD

30 GY28-6607
36 GY28-6775

36 GY28-6772
36 GY28-6773

30 GY28-6617

TTRL (relative track address and
length)
in MACHINE-CHECK HANDLER, S360 M65 31 GY27-7155
TUB
---in CRJE PLM

36 GY30-2011

TUBRG

TSTRSTRT (field in test communication
table)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description of
TSTSET-IEKVTS
----rn-LINKAGE EDITOR (F)

31 GY28-6667

TSTSTAE (field in test communication table)
1n TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
description of

---rn CRJE PLM
TUCBAD1
in ONLINE TEST EXECUTIVE PROGRAM
discussion of
in common area
in operation diagram
TUCBAD2
in ONLINE TEST EXECUTIVE PROGRAM

36 GY30-2011

37 GY28-6651

37 GY28-6651

Ii

TVEC9 -

478

TYPBXT

TVEC9 macro
---rn
EMULATOR FOR 7090/7094/709411
TWAIT macro instruction
---rn BASIC TELECO~~. ACCESS METHOD

TYPE
35 GY27-7187
30 GY30-2001

Twait principle
in INPUT/OUTPUT SUPPORT

30 GY28-6609

Twenty-four hour pseudo clock (T4PC)
in MVT SUPERVISOR
use of

36 GY28-6659

TWI
in EMULATOR FOR 7090/7094/709411

35 GY27-7187

Twins
in TSO COMMAND PROCESSOR VOLI-CHNG 36 GY28-6771
Two-dimensional array
in FORTRAN IV (E)
array displacement computation
of
overflow table entry for
Two pass processing
in BASIC DIRECT ACCESS METHOD

25 GY28-6601

30 GY28-6617

TWOITMSB, field in PARSMACS
in TSO COMMAND PROCESSOR VOLI-ADD

36 GY28-6771

TXINPARM
in TSO TMP & SERVICE ROUTINES

36 GY28-6770

TXPNCH routine
--rzlCOBOL (F)

24 GY28-6382

TX'!'
in PL/I (F) COMPILER
TXT card image
in FORTRA~ IV (E)
generat~on of
in object module
TXT cards
in FORTRAN IV (G) COMPILER
general
produced by Allocate
TXT entry point
in LINKAGE EDITOR (F)
TXT format, Internal 1 Text
in COBOL-TO-PL/l LCP
TXT format, Internal 2 Text
in COBOL-To-PL/l LCP
TXT record
in BASIC DIRECT ACCESS METHOD
TXT records
in LINKAGE EDITOR (F)
TXTBFBEG
in BASIC DIRECT ACCESS METHOD

29 GY28-6800
25 GY28-6601

25 GY28-6638

31 GY28-6667
29 GY33-7007
29 GY33-7007

TYP E ITEM
in COBOL-TO-PL/l LCP

29 GY33-7007

31 GY28-6667

TYPEPDE, field in RUNPDL
in TSO COMMAND PROCESSOR VOL6-RUN

36 GY28-6776

30 GY28-6617

TYPERPI'
in COBOL-TO-PL/l LCP

29 GY33-7007

30 GY28-6617

TXTBUF

in BASIC DIRECT ACCESS METHOD
TXTLAB-IEKLAB
--rilLINKAGE EDITOR (F)

Types
30 GY28-6617
31 GY28-6667

TXTREG-IEKLRG
--rilLINKAGE EDITOR (F)

31 GY28-6667

TYPCAL
--rilALGOL-To-PL/l LCP

29 GY33-7006

~

in ALGOL-To-PL/l LCP
of precompiled procedure
of procedure declaration
procedure

in COBOL-TO-PL/l LCP
29 GY33-7007
Type attribute internal values (Phase F3)
in ASSEMBLER (F)
21 GY26-3700
Type conversions (string-arithmetic)
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
Type declaration
in ALGOL (F) COMPILER
26 GY33-8000
Type indicators (DCIDS) for type work
bucket
in ASSEMBLER (F)
21 GY26-3700
Type indicators (Phases F2/F3)
in ASSEMBLER (F)
21 GY26-3700
Type of initialization (by register RA)
in PL/I SUBROUTINE LIBRARY
29 GY28-6801
TYPE parameter, of CHECKER macro
in FORTRAN IV SYNTAX CHECKER PLM
25 GY28-6831
Type procedure
in ALGOL (F) COMPILER
26 GY33-8000
TYPE routine
in COBOL (F)
24 GY28-6382
TYPE statement
in FORTRAN IV-TO-PL/l LCP
29 GY33-7000
Type statement, explicit
in FORTRAN IV-TO-PL/l LCP
29 GY33-7000
Type statements
in LOADER
31 GY28-6714
allocation for
Type 1 entry
in PL/I (F) COMPILER
29 GY28-6800
Type-l Exit routine
in MVT SUPERVISOR
36 GY28-6659
description of
entry point name(s) of
flowchart of
mod ule name for
synopsis of
Type-l SVC switch (IEATYPE1)
in MVT SUP~RVISOR
36 GY28-6659
entry po~t name of
function of during ABTERM
processing
module name for
Type 1 work bucket
in ASSEMBLER (F)
21 GY26-3700
Type 2 work bucket
in ASSEMBLER (F)
21 GY26-3700
Type 3 work bucket
in ASSEMBLER (F)
21 GY26-3700

29 GY33-7006

in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
of error recovery
of hardware malfunctions
Types of dictionary entries
in PL/I (F) COMPILER
Types of error recovery
in MACHINE-CHECK HANDLER, M155/165
Types of record-IFCEREPO (165)
in UTILITIES
Types of utility programs
in UTILITIES
TYPES table
in LINKAGE EDITOR (F)

30 GY27-7198

TYPEXT
---rn-ALGOL-To-PL/l LCP

29 GY33-7006

29 GY28-6800

32 GY28-6614
32 GY28-6614
31 GY28-6667

479
TYPLOC-IEKQTL
in LINKAGE EDITOR (F)

31 GY28-6667

TYPTST (IKM22)
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
subroutine for record I/O options

TYPLOC - UADSNODB

UADSADRF, field in DNOBD
in TSO COMMAND PROC VOLl-DELETE
36 GY28-6771
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-677l
UADSAFLG, field in DNOB
in TSO COMMAND PROC VOLI-DELETE
36 GY28-6771
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-6771

TYP3
---rn COBOL-TO-PL/l LCP

29 GY33-7007

UADSALEN, field in DNOBD
in TSO COMMAND PROCESSOR VOLI-CHNG 36 GY28-6771

TYP4
in COBOL-TO-PL/l LCP

29 GY33-7007

---rn

T2321 switch
ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

UADSANEX, field in DNOB
in TSO COMMAND PROC VOLI-DELETE
36 GY28-6771
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-6771

T4PC
in MVT SUPERVISOR

36 GY28-6659

UADSANUM, field in DNOBD
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-6771
UADSAREAS, field in DNOBD
in TSO COMMAND PROC VOLI-DELETE

T88 Condition Name
--in COBOL (E)

Q (ENVIRONMENT option)

,

m

in PL/I SYNTAX CHECKER PLM

UADSARES, field in DNOBD
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-6771
UADSASUB, field in DNOB
in TSO COMMAND PROCESSOR VOLI-CHNG 36 GY28-677l
29 GY33-8009

UADDCBAD, field in RDWRPARM
in TSO COMMAND PROCESSOR VOLI-CHNG 36 GY28-6771
UADEL DD
UPDATE ANALYSIS PROGRAM

---rn

UADS
---rn TSO COMMAND PROCESSOR VOLI-ADD
account number data block base
adding data
additions to
data set
DCB address
free space queue element base
information
mask
procedure name data block base
structure
user entry header base
pointer arrangements
in TSO COMMAND PROCESSOR VOLI-CHNG
changes in
data, to copy the
DCB address
directory updates
structure
UADS (user attribute data set)
in TSO COMMAND PROC VOL1-SUBRTNS
directory entry field in
directory header field for
directory work area for
in TSO COMMAND PROCESSOR VOLI-LIST
search of
structure of
UADS (User Attribute Data Set), use

36 GY28-7106
36 GY28-6771

UADSATTR, field in DHED
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-677l
UADSBLNG, field in DHED
in TSO COMMAND PROC VOLl-DELETE
36 GY28-677l
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-6771
UADSBNOl, field in DHED
in TSO COMMAND PROC VOLl-DELETE
36 GY28-677l
in TSO COMMAND PROCESSOR VOLI-CHNG 36 GY28-677l
UADSBN02, field in DHED
in TSO COMMAND PROC VOLl-DELETE
36 GY28-677l
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-677l
UADSDCB, field in
in TSO COMMAND
UADSDCB, field in
in TSO COMMAND

36 GY28-6771

UADSF§QE,
in TSO
UADSFSQE,
in TSO

DIRWA
PROC VOLl-DELETE
36 GY28-677l
DIRYWA
PROCESSOR VOLl-CHNG 36 GY28-677l

data area
COMMAND PROC VOLl-DELETE
in data area directory
COMMAND PROCESSOR VOLl-ADD

36 GY28-6771
36 GY28-677l

UADSF§QP, field in DHED
in TSO COMMAND PROC VOLl-DELETE
36 GY28-677l
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-677l
36 GY28-6771

36 GY28-6771

of

in TSO CONTROL PROGRAM

36 GY28-6771

24 GY24-5009

36 GY28-7199

UADSIBMIT, field in DHED
in TSO COMMAND PROC VOLl-DELETE

36 GY28-677l

UADSINDl, field in DHED
in TSO COMMAND PROC VOLl-DELETE

36 GY28-6771

UADSINST, field in DHED
in TSO COMMAND PROC VOLl-DELETE
36 GY28-677l
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-677l

UADSACTR, field in DNOBD
in TSO COMMAND PROCESSOR VOLI-CHNG 36 GY28-6771

UADSMAXC, field in DHED
in TSO COMMAND PROC VOLl-DELETE
36 GY28-677l
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-677l

UADSADAT, field in DNOB
in TSO COMMAND PROC VOLl-DELETE
36 GY28-6771
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-6771

UADSMHDR, field in DHED
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-677l

UADSADDR, field in RDWRPARM
in TSO COMMAND PROCESSOR VOLI-CHNG 36 GY28-6771

UADSNODE
in TSO COMMAND PROCESSOR VOLl-ADD
data area

36 GY28-677l

11

III

UADSNODB -

480

UCB

UADSNODE
I in TSO COMMAND PROCESSOR VOLl-ADD 36 GY28-677l
L--------------------------------------(continued)
in directory
UADSNUSP, field in DHED
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-677l
UADSNxxx, field in UAISNODE
in TSO COMMAND PROC VOLl-DELETE

36 GY28-677l

UADSPCTR. field in DPOBD
in TSO COMMAND PROC VOLl-DELETE
36 GY28-677l
in TSO COMMAND PROCESSOR VgLl-CHNG 36 GY28-677l
UADSPDAT, field in DPOB
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-677l
UADSPFLG, field in DPOB
in TSO COMMAND PROC VOL1-DELETE
36 GY28-677l
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-677l
UADSPNEX, field i8 DPOB
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-677l
UADSPPWD, field in DPOBD
in TSO COMMAND PROC VOLl-DELETE
36 GY28-671l
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-677l
UADSPSUB, field in DPOB
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-677l
UADSPWD1, field in DHED
in TSO COMMAND PROC VOL1-DELETE
36 GY28-677l
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-677l
UADSRCTR, field in DROBD
in TSO COMMAND PROC VOLl-DELETE
36 GY28-671l
in TSO COMMAND PROCESSOR VOLI-CBNG 36 GY28-677l
UADSRDAT~

field in DROB
in TSO COMMAND PROC VOL1-DELETE
36 GY28-677l
in TSO COMMAND PROCESSOR VOLl-CBNG 36 GY28-677l

UADSRFLG, field in DROB
in TSO COMMAND PROC VOLl-DELETE
36 GY28-677l
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-677l
UAOORNAM, field in DROBD
in TSO COMMAND PROC VOL1-DELETE
36 GY28-677l
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-677l
UADSRNEX, field in DROB
in-TSO COMMAND PROC VOL1-DELETE
36 GY28-677l
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-677l
UADSRRES. field in DROBD
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-677l
UADSRRS2. field in DROBD
in TSO COMMAND PROC VOL1-DELETE
36 GY28-6771
in TSO COMMAND PROCESSOR VOLl-CBNG 36 GY28-677l
UADSRSIZ. field in DROBD
in TSO COMMAND PROC VOLl-DELETE
36 GY28-677l
in TSO COMMAND PROCESSOR VOL1-CBNG 36 GY28-677l
UADSRSUB, field in DROB
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-677l
UADSUNAM. field in DROBD
in TSO COMMAND PROC VOL1-DELETE
36 GY28-677l
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-677l
UADSUPTP, field in DHED
in TSO COMMAND PROC VOLl-DELETE

36 GY28-677l

UADSUPTR, field in DHED
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-677l
UADSUSER. field in DHED
in TSO COMMAND PROC VOL1-DELETE
36 GY28-677l
in TSO COMMAND PROCESSOR VOL1-CBNG 36 GY28-677l
UADSxxxx. fields. in DPOBD
in TSO COMMAND PROCESSOR VOL1-ADD
UADSxxxx, fields. in DROBD
in TSO COMMAND PROCESSOR VOL1-ADD
UADSxxxx fields in
in TSO COMMAND PROCESSOR VOLl-ADD
base pointer
DHED
DNOBD
DPOBD
DROBD
UADSNODE
UAIS
---rn TSO COMMAND PROC VOLl-DELETE
directory update
entries in
information
local level chain
pointer to DCB
scanning
structure

36 GY28-677l
36 GY28-677l
36 GY28-677l

36 GY28-677l

UAISACTR, field in DNOBD
in TSO COMMAND PROC VOLl-DELETE

36 GY28-677l

UAISALEN. field in DNOBD
in TSO COMMAND PROC VOLl-DELETE

36 GY28-677l

UAISANUM, field in DNOBD
in TSO COMMAND PROC VOLl-DELETE

36 GY28-677l

UAISASUB. field in DNOB
in TSO COMMAND PROC VOLl-DELETE

36 GY28-677l

UAISISID, field in DHED
in TSO COMMAND PROC VOLl-DELETE

36 GY28-677l

UAISMHDR, field in DBED
in TSO COMMAND PROC VOLl-D~LETE

36 GY28-677l

UAISNUSP, field in DHED
in TSO COMMAND PROC VOLl-DELETE

36 GY28-677l

UAISPDAX, field in DPOB
in TSO COMMAND PROC VOL1-DELETE

36 GY28-677l

UAISPNEX. field in DPOB
in TSO COMMAND PROC VOL1-DELETE

36 GY28-677l

UAISPRES, field in DPOBD
in TSO COMMAND PROC VOL1-DELETE

36 GY28-677l

UAISRNDS, field in DROBD
in TSO COMMAND PROC VOLl-DELETE

36 GY28-677l

UAISRRES, field in DROBD
in TSO COMMAND PROC VOLl-DELETE

36 GY28-677l

UAISRSUB, field in DROB
in TSO COMMAND PROC VOL1-DELETE

36 GY28-677l

UCB
- i n INPUT/OUTPUT SUPPORT
in JOB MANAGEMENT
in ONLINE TEST EXECUTIVE PROGRAM
UCB (Oni t Control Block)
in DIRECT ACCESS DEVICE SPACE MGT.
DEB pointer to

30 GY28-6609
36 GY28-66l3
37 GY28-665l
30 GY28-6607

481
UCB (unit Control Block)
I in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
L--------------------------------------(continued)
use of by:
LSPACE routine
Release routine
Rename routine
Scratch routine
UCB address table
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
UCB addresses, physical device
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
UCB table
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
UCM

--in CRJE PLM

36 GY30-2011

UCRALIAS
in UPDATE ANALYSIS PROGRAM

36 GY28-7106

OCB -

Ul.llC&TLG

UIDUSER, field in DUIDL
in TSO COMMAND PROC VOLl-DELETE
36 GY28-6771
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
UIDxxxx, fields in DUIDL
in TSO COMMAND PROCESSOR VOL1-ADD

36 GY28-6771

UISCHG, field in DUIDL
---rn-TSO COMMAND PROC VOLl-DELETE

36 GY28-6771

UMC indicator
--in MVT JOB MANAGEMENT

36 GY28-6660

UMSM (User Main Storage Map)
in TSO CONTROL PROGRAM
construction of
format of
use of
in swap operation
to restore user after
swap-in

36 GY28-7199

UCS

--in INPUT/OUTPUT SUPERVISOR
UCS printer as output device
in MVT JOB MANAGEMENT

30 GY28-6616

UNALIGNED (keyword attribute)
in PL/I SYNTAX CHECRER PLM

29 GY33-8009

36 GY28-6660

UIDCHG, field in DUIDL
---rn-TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-6771

Unallocate
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY28-6772
Unallocate, data set
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
unallocate subroutine (IKJEFD20)
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
flowchart

UIDDEL, field in DUIDL
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

Unallocating data sets
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6174

UIDL
---rn TSO COMMAND PROCESSOR VOL1-CHNG
flags
pointer to next entry
UIOL. field in DUIDL
in TSO COMMAND PROC VOL1-DELETE
UIDL flags
in TSO COMMAND PROC VOL1-DELETE
UIDL mask
in TSO COMMAND PROCESSOR VOL1-ADD

Unallocation
in MVT JOB MANAGEMENT

36 GY28-6660

UNARY-IEKKUN
---rn
LINKAGE

31 GY28-6667

UIDADD, field in DUIDL
---rn-TSO COMMAND PROC VOL1-DELETE
36 GY28-6771
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

UIDLAD, field in PARMLIST
---rn-TSO COMMAND PROCESSOR VOL1-ADD

36 GY28-6771

36 GY28-6771
36 GY28-6711
36 GY28-6771
36 GY28-6111

UIDLCT, field in DUIDL
---rn-TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6711
UIOLNEX, field in DUIDL
in TSO COMMAND PROC VOL1-DELETE
36 GY28-6711
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
UIDLN1, field in DUIDL
---rn-TSO COMMAND PROC VOLl-DELETE
36 GY28-6171
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
UIDLPTR, field in
in TSO COMMAND
UIDLPTR, field in
in TSO COMMAND

ACCTPLST
PROCESSOR VOL1-CHNG 36 GY28-6771
COMMON
PROCESSOR VOL1-ADD 36 GY28-6771

EDITOR (F)
Unary minus
in LINKAGE EDITOR (F)
skeleton instructions
Unary prefixed triples
in PL/I (F) COMPILER
Unblocked records
in INPUT/OUTPUT SUPERVISOR
Get routines
exchange buffering
simple buffering
Update mode
Put routines
exchange buffering
simple buffering
Update mode
UNBUFFERED (keyword attribute)
in PL/I SYNTAX CHECRER PLM
attribute classification
in OPEN statement

UIDNTR, field in DICTLR
in TSO COMMAND PROC VOL1-DELETE

36 GY28-6771

UIDN2, field in DUIDL
in TSO COMMAND PROC VOLl-DELETE
36 GY28-6171
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

29 GY28-6800
30 GY28-6616

29 GY33-8009

UNCAT function

--rn CATALOG MANAGEMENT

in TSO CATALOG MANAGEMENT

UIDLSWS, field in DUIDL
in TSO COMMAND PROC VOLl-DELETE
36 GY28-6771
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6711

31 GY28-6667

Uncatalog
in TSO
UNCATALOG
in TSO

data set
COMMAND PROC VOL2-DELETE
data set disposition
COMMAND PROC VOL6-PROTECT

UNCATLG disposition
in JOB MANAGEMENT

30 GY28-6606
36 GY28-6745

36 GY28-6772
36 GY28-6776

36 GY28-6613

11[1]

1182

Uncorrectable - Unit
Uncorrectable error
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
Uncorrectable I/O error
in UTILITIES
32 GY28-66111
IEBGENER
Uncorrectable storage data error
in MACHINE-CHECK HANDLER, M135/1115 30 GY27-7237
Undeclared identifier
in ALGOL (F) COMPILER
Undefined formal parameter
in PL/I (F) COMPILER
Undefined statement numbers
in LINKAGE EDITOR (F)
UNDEFINEDFlLE condition
in PLII SUBROUTINE LIBRARY
undimensioned structure overlay
defining
in PL/I (F) COMPILER
Unernulated operations
in 70711 EMULATE FOR M/165
Unegual record comparision-IEBCOMPR
in UTILITIES
Unequal true names-IEBCOMPR
in UTILITIES

26 GY33-8000
29 GY28-6800
31 GY28-6667
29 GY28-6801

29 GY28-6800
GY27-7228
32 GY28-66111
32 GY28-66111

Unexpected error message
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
Unexpected errors
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
Unify
in
Unify
in

label list
LOADER
phase (IEYUNF)
LOADER
definition
detailed description
general description
location in storage
rolls used by

Unigue oncode value
in PLII SUBROUTINE LIBRARY
Unit
---rn INPUT/OUTPUT SUPPORT
Unit address in job
identification number
in S/360 JOB PROCESSING 1130/2250
Unit affinity
in JOB MANAGEMENT
Unit assignment table
in FORTRAN IV (E)
Unit assignment table (IHCUATBL)
in LOADER
Unit assignment table
(IKDUATBL)
in S/360-1130 DATA TMN. - FORTRAN
Unit assignment table IHCUATBL
in LINKAGE EDI'1:0R (F)
Unit blocks
in FORTRAN IV (E)
for direct access data sets
for sequential access data sets
in LINKAGE EDITOR (F)
in LOADER
local devices ERP module
in INPUT/OUTPUT SUPPORT
cross reference table
flowchart
library
microfiche directory

31 GY28-67111
31 GY28-67111

29 GY28-6801
30 GY28-6609
36 GY27-7166
36 GY28-6613
25 GY28-6601
31 GY28-67111
25 GY27-7161
31 GY28-6667
25 GY28-6601
31 GY28-6667
31 GY28-67111
30 GY28-6609

module description
register usage
Unit check and unit exception on
read/Write CCws for audio and 2260
Unit check for non-read, non-write,
non-poll Ccws ERP module
in INPUT/OUTPUT SUPPORT
30
cross reference table
flowchart
library
microfiche directory
module description
register usage
Unit Control Block
in INITIAL PROGRAM LOADER AND NIP 36
DEVTYP
direct access device
initialization routine
initialization (MVT with Model
multiprocessing)
SYSRES
table
in MFT SUPERVISOR
36
Unit control block (UCB)
in BASIC TELECOMM. ACCESS METHOD
30
creation
description
device codes
device type word
fields
format
function
system generation
30
in CATALOG MANAGEMENT
device type field of
of control volurre
as parameter
as part of 'rname'
searchi ng for
30
in GRAPHICS ACCESS METHOD
in JOB MANAGEMENT
36
in MVT JOB MANAGEMENT
36
protection of
in ONLINE TEST EXECUTIVE PROGRAM
37
address of
lookup'routine
not-ready bit
status
UCBNALOC bit
36
in TSO CATALOG MANAGEMENT
device type field of
of control volume
as part of 'rname'
as parameter
searching for
Unit control block (UCB), pointers
to
in INDEXED SEQUEN. ACCESS METHOD
30
Unit control module
36
in CRJE PLM
36
in MFT SUPERVISOR
base
format
entry
format
prefix
,format
36
in MVT SUPERVISOR
Base
description
MCS Prefix
Message Text and Event Indication
List
Unit Control Module (UCM)
in INITIAL PROGRAM LOADER AND NIP 36
master console entry

GY28-6609

GY28-6661

GY27-7236
GY30-2001

GY28-6606

GY27-7113
GY28-6613
GY28-6660
GY28-6651

GY28-67115

GY28-6618
GY30-2011
GY27-7236

GY28-6659

GY28- 6661

483
unit Control Module (UCM)
I in INITIAL PROGRAM LOADER AND NIP 36 GY28-6661
L--------------------------------------(continued)
Multiple Console support Prefix
Unit count table address
in SORT/MERGE
33 GY28-6597
UNIT BCB, testing of
in S/360 JOB PROCESSING 1130/2250 36 GY27-7166
UNIT keyword
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771
index for
UNIT KEYWORD PCE
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
Unit name
in TSO COMMAND PROC VOL4-LISTBC
36 GY28-6774
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
flags
key
length
new
PCE
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
UNIT name
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771
flags
PCE length
Unit name requested, field
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY28-6772
Unit number
in FORTRAN IV (E)
25 GY28-6601
Unit record
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
format of data
I/O handling
unit record emulation
in 7074 EMULATE FOR M/165
GY27-7228
Unit Record routines
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
Read (NDURGET)
description
flowchart
Write (NPURPUT)
description
flowchart
Unit Record Write Move subroutine
(URMOVE)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
Unit Record Write Request I/O subroutine
(URPUT)
in EMULATOR FOR 7090/7094/709411
35 GY27-7187
description
flowchart
UNIT REF parameter in GJOBCTL macro
instruction
in GRAPHIC JOB PROCESSOR SUPPORT
36 GY27-7159
Unit request interface routine
in INPUT/OUTPUT SUPPORT
30 GY28-6609
cross reference table
flowchart
library
microfiche directory
module description
register usage
Unit request routine
in INPUT/OUTPUT SUPPORT
30 GY28-6609
cross reference table
flowchart
library
microfiche directory
module description
register usage
UNIT subfield
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771
unit tables

Unit - Unlock
in FORTRAN IV (E)

25 GY28-6601

UN ITADR , field in CHNGPDL
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-6771
UNITFLG, field in CHNGPDL
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
UNITFLGS, field in CHNGPDL
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-6771
UN I TLNG, field in CHNGPDL
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
Unitname, requested
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
UNITNBR, field in CHNGPDL
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-6771
UNITREF parameter in GJOBCTL
macro instruction
in S/360 JOB PROCESSING 1130/2250
UNITS parameter
GRAPHIC JOB PROCESSOR SUPPORT
in GJOBCTL macro instruction
UNITS parameter in GJOBCTL
macro instruction
in S/360 JOB PROCESSING 1130/2250

---rn

36 GY27-7166
36 GY27-7159

36 GY27-7166

UNITSUBF, field in CHNGPDL
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
UNITxxxx, fields, in ADDPDL
in TSO COMMAND PROCESSOR VOL1-ADD

36 GY28-6771

Universal character set
in INPUT/OUTPUT SUPERVISOR

30 GY28-6616

UNKEYPCE, field in PARSMACS
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
UNLABCM
in FORTRAN IV-TO-PL/1 LCP

29 GY33-7000

Unlabeled tape positioning
in FORTRAN IV (G) COMPILER

25 GY28-6638

Unlike attributes indicator
---rn-BASIC DIRECT ACCESS METHOD

30 GY28-6617

UNLOAD command

----rn-CONTROL

PROGRAM WITH MFT
in JOB MANAGEMENT
in MVT JOB MANAGEMENT

36 GY27-7128
36 GY28-6613
36 GY28-6660

unloaded version of a data set
in UTILITIES

32 GY28-6614

Unloading a BSAM data set
in UTILITIES

32 GY28-6614

UNLOCK (keyword statement)
in PL/I SYNTAX CHECKER PLM
record I/O statement
UNLOCK macro expansion linkage
in INPUT/OUTPUT SUPPORT
UNLOCK parameter list
in INPUT/OUTPUT SUPPORT
Unlock routine
in INPUT/OUTPUT SUPPORT
cross reference table
flowchart
library
microfiche directory

29 GY33-8009
30 GY28- 6609
30 GY28- 6609
30 GY28- 6609

I!j

484

unlock - Update

Unlock routine
I in INPUT/OUTPUT SUPPORT
30 GY28-6609
l------------------------------(continued)
module description
register usage
Unmounted volumes, requests for
in JOB MANAGEMENT

36 GY28-6613

UNNAME, field in PARSMACS
---rn-TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

Unspecified volumes, allocation of
in JOB MANAGEMENT

36 GY28-6613

UNSUBPCE, field in PARSMACS
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-6771
Unsuccessful retry
in MACHINE-CHECK HANDLER, M135/l45 30 GY27-7237
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
UNTIL
---rn
ALGOL-To-PL/l

LCP

29 GY33-7006

UNTIL option
in COBOL (F)

24 GY28-6382

UNNAMFLG, field in PARSMACS
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

UNxxxxxx, fields in PARSMACS
in TSO COMMAND PROCESSOR VOL1-ADD

36 GY28-6771

UNNAMLNG. field in PARSMACS
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

UP subcommand
in TSO COMMAND PROCESSOR VOLJ-EDIT 36 GY28-6773
summary of operations
syntax

UNNAMELN, field in PARSMACS
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

UNNAMPCE, field in PARSMACS
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
UNNAMSUB, field in PARSMACS
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
Unnesting
in FORTRAN IV SYNTAX CHECKER PLM
definition of
effect on error messages
examples of

30 GY30-2002

UNPOIN
in ALGOL-To-PL/l LCP

29 GY33-7006

Unposted queue
in SEQUENTIAL ACCESS METHODS

30 GY28-6604

Unreachable block error
in INDEXED SEQUEN. ACCESS METHOD

30 GY28-6618

Unreceived data sets
in JOB MANAGEMENT

36 GY28-6613

Unrecoverable I/O error
in ALGOL (F) COMPILER

26 GY33-8000

Unretryable error
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
Unretryable instruction
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198
UNRGEN-IEKVUN
in LINKAGE EDITOR (F)

31 GY28-6667

'unsafe' variables
in PL/I (F) COMPILER

29 GY28-6800

UNSPEC function
in PL/I SUBROUTINE LIBRARY

UPA3
----in COBOL-TO-PL/l LCP

29 GY33-7007

UPA33

-rn

Unscheduled queue--BISAM
in INDEXED SEQUEN. ACCESS METHOD
format
use in processing
pointers to

29 GY33-7007

25 GY28-6831

UNNMEPCE, field in PARSMACS
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
UNPAK subroutine
QUEUED TELECOMM. ACCESS METHOD
chart

UPALI1
---rn-COBOL-To-PL/l LCP

30 GY28-6618

29 GY28-6801

---rn COBOL-To-PL/l LCP

29 GY33-7007

UPBl
----in COBOL-To-PL/1 LCP

29 GY33-7007

·Update-in-placen-IEHATLAS
in UTILITIES

32 GY28-66l4

Update
in UPDATE ANALYSIS PROGRAM
36 GY28-7l06
UPDATE (keyword attribute)
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
attribute classification
in OPEN statement
Update analysis program
36 GY28-7106
in UPDATE ANALYSIS PROGRAM
Update channel programs
in INPUT/OUTPUT SUPERVISOR
30 GY28-66l6
30 GY28-6604
in SEQUENTIAL ACCESS METHODS
UPDATE DIRECT
in ALGOL-TO-PL/l LCP
29 GY33-7006
Update DSCB
in TSO COMMAND PROC VOL6-PROTECT
36 GY28-6776
Update function
in CRJE PLM
36 GY3G-2011
changing lines
deleting lines
entering lines
list function
merging lines
renumbering lines
save function
scratch function
setting tabs
Update mode
in INPUT/OUTPUT SUPERVISOR
30 GY28-66l6
appendages
end-of-extent
SIO
Check routine
Get routine
description of
introduction to
Note/Point routine
PUTX Routine
QSAM channel programs (Empty-and-Refill,

485
Update mode
I in INPUT/OUTPUT SUPERVISOR
30 GY28-66l6
I
QSAM channel programs (Empty-and-Refill,
L--------------------------------------(continued)
Refill-only)
Read/Write routine
stage 2 Open executors
stage 3 Open executor
synchronizing routine
Update of ATAB and FTAB
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
Update processing
in UPDATE ANALYSIS PROGRAM
36 GY28-7l06
Update processing--BlSAM
in INDEXED SEQUEN. ACCESS METHOD
30 GY28-66l8
Update queue--BISAM
in INDEXED SEQUEN. ACCESS METHOD
30 GY28-66l8
format
pointers to
use in processing
Update routine
in GRAPHIC SUBRTN. PACKAGE
25 GY27-7l52
Update utility program
in UPDATE ANALYSIS PROGRAM
36 GY28-7l06
Updated copy
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-677l
Updated member
in TSO COMMAND PROC VOL1-DELETE
36 GY28-677l
Updating PARADICT
in COBOIrTo-PL/l LCP
Updating symbolic libraries
in UTILITIES

32 GY28-66l4

UPDCBPTR, field in COMMON
in TSO COMMAND PROCESSOR VOL1-ADD

36 GY28-6771

UPL
in CONTROL PROGRAM WITH MFT

36 GY27-7l28

UPRNT
in FORTRAN IV-TO-PL/l LCP

29 GY33-7007

Update - Use

UPTPTR, field in ACCTPLST
in TSO COMMAND PROCESSOR VOLI-CHNG 36 GY28-677l
UPTPTR, field of PARMLSTS
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
UPTO pointer to
in TSO COMMAND PROC VOL2-DELETE

36 GY28-6772

Upward calls
in BASIC DIRECT ACCESS METHOD

30 GY28-6617

UQEL (User Queue Element)
in TSO CONTROL PROGRAM

36 GY28-7199

USAG
---rn COBOL-TO-PL/l LCP

29 GY33-7007

USAGE

--rn COBOL

(F)
in COBOL-TO-PL/l LCP
Usage count
in LINKAGE EDITOR (F)

USATBOO, field in DHED
in TSO COMMAND PROC VOLI-DELETE

24 GY28-6382
29 GY33-7007
31 GY28-6667
36 GY28-6771

USATROO, field in DHED
in TSO COMMAND PROCESSOR VOLI-CHNG 36 GY28-6771
USATR01. field in DHED
in TSO COMMAND PROC VOLl-DELETE
36 GY28-677l
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
USATR01, fields in DHED
in TSO COMMAND PROCESSOR VOLI-ADD 36 GY28-6771
USATR02. field in DHED
in TSO COMMAND PROC VOLl-DELETE
36 GY28-677l
in TSO COMMAND PROCESSOR VOLI-CHNG 36 GY28-6771
USDENTRY, field in USDIR
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

29 GY33-7000
USDIR

UPT
in TSO COMMAND PROC VOLI-BROADCAST
in TSO COMMAND PROC VOL4-LISTBC
in TSO COMMAND PROC VOL6-PROFILE
in TSO COMMAND PROC VOL6-PRGrECT
in TSO COMMAND PROC VOL6-RENAME
pointed to by DFPL
in TSO COMMAND PROC VOL6-TERMINAL
in TSO COMMAND PROCESSOR VOLl-CHNG
in TSO COMMAND PROCESSOR VOL3-EDIT
in TSO COMMAND PROCESSOR VOL4-HELP
in TSO COMMAND PROCESSOR VOL6-RUN
in TSO TMP & SERVICE ROUTINES
UPT, pointer to
in TSO COMMAND PROC VOL5-0PERATOR
in TSO COMMAND PROCESSOR VOL2-CALL
in TSO COMMAND PROCESSOR VOL4-EXEC
UPT, pointers to
in TSO COMMAND PROC VOL6-WHEN/END
UPT, points to
in TSO COMMAND PROCESSOR VOLI-ADD
UPT (user profile table)
in TSO COMMAND PROCESSOR VOL6-TIME
UPT (User Profile Table), format
of
in TSO CONTROL PROGRAM
UPTAD, field in PARMLIST
in TSO COMMAND PROCESSOR VOLl-ADD

36
36
36
36
36

GY28-6771
GY28-6774
GY28-6776
GY28-6776
GY28-6776

36
36
36
36
36
36

GY28-6776
GY28-6771
GY28-6773
GY28-6774
GY28-6776
GY28-6770

--rn

TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6775
data area
in data area directory
USDIR (broadcast data set I/O address
buffer)
in TSO COMMAND PROC VOLI-BROADCAST 36 GY28-~771
as input to IEEVSDIO
format of
function of
as input to IEEVSDIO
USDPTR, field in USOIR
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

36 GY28-6775
36 GY28-6772
36 GY28-6774

USDREND, field in UsnIR
in TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

36 GY28-6776

USDRES, field in USDIR
---rn-TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775

36 GY28-677l
USE
36 GY28-6776
36 GY28-7l99
36 GY28-6771

UPTADD. field in PLPLIST
in TSO COMMAND PROCESSOR VOLI-CHNG 36 GY28-6771

in COBOL (E)
Use count
in MFT SUPERVISOR
USE list
in PL/I (F) COMPILER
Use of ·write special" CCW-IEHATLAS
in UTILITIES
Use of TCAM PLM
in INPUT/OUTPUT SUPPORT
Use of true member names-IEBCOMPR
in UTILITIES

24 GY24-5009
36 GY27-7236
29 GY28-6800
32 GY28-6614
30 GY28-6609
32 GY28-6(l14

III

Use/respoasibility - User
use/responsibility count
in MVT SUPERVISOR
USE sent ence
in COBOL (F)
Use vector field
in LINKAGE EDITOR (F)
USED LIB FUNCTION roll
----rn LOADER
description
in allocation
in Exit
User
---rn TSO COMMAND PROC VOL1-DELETE
environment
identification area
dentification data test
identification PDE
profile table, pointer to
work area, pointer to
in TSO COMMAND PROC VOL5-0PERATOR
attributes
directory record pointer
eligibility
mail directory
mail flags
mail message record
in TSO COMMAND PROCESSOR VOL1-ADD
attribute data set
entry origin address
id specified
identification data list
profile table, points to
work area, points to
in TSO COMMAND PROCESSOR VOL3-EDIT
definition
in TSO COMMAND PROCESSOR VOL4-FREE
region
workarea
USER, parameter
in TSO COMMAND PROCESSOR VOL6-SEND
User, terminal
in TSO COMMAND PROC VOL4-LISTBC
region
id (USERID)
User ABEND
in TSO COMMAND PROC VOL6-WHEN/END
User account number, validation of
in TSO COMMAND PROC VOL1-SUBRTNS
User attribute data list (UADL)
in TSO COMMAND PROC VOL1-SUBRTNS
adding new entries to
obtaining a main storage copy of
entries
process ing of
by IKJEFA52
by IKJEFA51
updating of
User Attribute Data Set
in TCAM SERVICEABILITY AIDS
in TSO COMMAND PROCESSOR VOL1-ADD
User attributes
in TSO COMMAND PROC VOL4-LISTALC
in TSO COMMAND PROC VOL5-LISTDS
in TSO COMMAND PROC VOL6-PROTECT
in TSO COMMAND PROCESSOR VOL3-EDIT
definition
in TSO COMMAND PROCESSOR VOL6-TlME
User attributes data set
in TSO COMMAND PROCESSOR VOL1-CHNG
User directory
in REMOTE JOB ENTRY
User directory search routine
in REMOTE JOB ENTRY
User-entered values

486
36 GY28-6659
24 GY28-6382
31 GY28-6667
31 GY28-6714

36 GY28-6771

36 GY28-6775

36 GY28-6771

36 GY28-6773
36 GY28-6774

36 GY28-6776
36 GY28-6774

36 GY28-6776
36 GY28-6771
36 GY28-6771
user

30 GY30-2027
36 GY28-6771
36
36
36
36

GY28-6774
GY28-6775
GY28-6776
GY28-6773

36 GY28-6776
36 GY28-6771
36 GY30-2005
36 GY30-2005

in TSO COMMAND PROCESSOR VOL4-EXEC
User entry origin address
in TSO COMMAND PROCESSOR VOL1-ADD
User error handling routine
in MFT SUPERVISOR
User Error routines
in COBOL (F)
User exit
in TSO COMMAND PROC VOL6-SUBMIT
User exit-IEBlSAM
in UTILITIES
User exit routine
in MFT SUPERVISOR
scheduling
in MVT SUPERVISOR
scheduling of
User exits
in SOR'UMERGE
block/deblock modules for
User file manager
in CRJE PLM
User m
in TSO COMMAND PROCESSOR VOL2-CALL
User ID, prefixed to dsname
in TSO COMMAND PROC VOL2-DELETE
User ID indicator
in TSO COMMAND PROC VOL2-ALLOCATE
User identification (USERID)
in TSO COMMAND PROCESSOR VOL3-EDIT
definition
User identification data list
in TSO COMMAND PROCESSOR VOL1-CHNG
User identity
in TSO COMMAND PROCESSOR VOL1-ADD
User interface routine
in INPUT/OUTPUT SUPPORT
cross reference table
flowchart
functions
library
microfiche directory
module description
register usage
User label allocation
in DIRECT ACCESS DEVICE SPACE MGT.
User-label processing/exits
in UTILITIES
IEBCOMPR
User label processing exits-IEBUPDTE
in UTILITIES
IEHMOVE
return codes
User label track
in SEQUENTIAL ACCESS METHODS
User libraries
in CRJE PLM
User library directory entry
in CRJE PLM
CRBE-crea ted
CRJE-created
utility-created
User library I/O errors
in CRJE PLM
User library out of space
in CRJE PLM
User line numbers
in PL/I SYNTAX CHECKER PLM
User logon processing
in TSO COMMAND PROCESSOR VOL6-SEND
User mail
in TSO COMMAND PROCESSOR VOL6-SEND
User Main Storage Map
in TeAM SERVICEABILITY AIDS
User message file
in CRJE PLM
User modifications

36 GY28-6774
36 GY28-6771
36 GY27 -7 236
24 GY28-6382
36 GY28-6776
32 GY28-6614
36 GY27-7236
36 GY2S-6659
33 GY28-6597
36 GY30-2011
36 GY28-6772
36 GY2S-6772
36 GY2S-6772
36 GY2S-6773
36 GY2S-6771
36 GY28-6771
30 GY2S-6609

30 GY2S-6607
32 GY28-6614
32 GY2S-6614

30 GY2S-6604
36 GY3 0- 2 011
36 GY30-2011

36 GY30-2011
36 GY30-2011
29 GY33-S009
36 GY2S-6776
36 GY2S-6776
30 GY30-2027
36 GY30-2011

487
User modifications
~-------------------------------------(continued)

in SORT/MERGE
33 GY28-6597
effect on record movement
User modifications to records-IEBDG
in UTILITIES
32 GY28-66l4
User parameter area
in MFT SUPERVISOR
36 GY27-7236
User parameter list-IEBGENER
in UTILITIES
32 GY28-66l4
User Profile Table
in TCAM SERVICEABILITY AIDS
30 GY30-2027
in TSO COMMAND PROC VOL6-PROFILE
36 GY28-6776
as user profile residence
building of
description of fields
freeing of
illustration of
modification of
pointer to
in CPPL
in PPL
recording options in
routines which use
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
User profile table, pointer to
in TSO COMMAND PROC VOL2-DELETE
36 GY28-6772
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-677l
User profile table (UPT)
in TSO COMMAND PROC VOL1-BROADCAST 36 GY28-677l
in ACCTCPPL
in DAPL
in IOPL
in TSO COMMAND PROC VOL4-LISTBC
36 GY28-6774
passed in CPPL
passed in DAPL
passed in IOPL
pass ed in PPL
in TSO COMMAND PROC VOL6-PROTECT
36 GY28-6776
pointer to in DAPB18
pointer to in DAPL
pointer to in DFPL
pointer to in IOPL
pointer to in PPL
pointer to in PSCB
in TSO COMMAND PROC VOL6-RENAME
36 GY28-6776
in TSO COMMAND PROC VOL6-TERMINAL 36 GY28-6776
pointer to in CPPL
pointer to in PPL
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
definition
updating of
in TSO COMMAND PROCESSOR VOL4-FREE 36 GY28-6774
in CPPL
in IOPL
in SERTEPRM
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6774
pointer in CPPL
pointer in DAPL
pointer in PPL
pointer in TMPINT
in TSO COMMAND PROCESSOR VOL6-RUN 36 GY28-6776
pointer to in CPPL
pointer to in DAPL
pointer to in IOPL
pointer to in PPL
pointer to in WORKAREA
in TSO COMMAND PROCESSOR VOL6-TlME 36 GY28-6776
in TSO TMP & SERVICE ROUTINES
36 GY28-6770
format
use by Terminal I/O Service Routines
use by Terminal Monitor Program
User queue--scan mode
in INDEXED SEQUEN. ACCESS METHOD
30 GY28-66l8
format
flowchart references

User - Oserid
use in processing
User Queue Element
in TCAM SERVICEABILITY AIDS
User region
in TeAM SERVICEABILITY AIDS
User requests
in TSO COMMAND PROC VOL6-PROTECT
(ADD, REPLACE, DELETE, LIST)
acti on taken
in flowcharts
in IK.JPARMD
in method of operation diagram
User return codes-IEBISAM
in UTILITIES
User save area
in MFT SUPERVISOR
User selected library modules
in PL/I SUBROUTINE LIBRARY
User specified options
in TSO COMMAND PROC VOL6-TERMINAL
User totaling exit routine
in UTILITIES
IEBGENER
IEBUPDTE
User totaling facility
in INPUT/OUTPUT SUPERVISOR
access method save area
End-of-block modules
Stage 1 Open executors
EOV/NEW volume executor
User trailer exit-IEBUPDAT
in UTILITIES
User verification file
in CRJE PLM
User verification file manager
in CRJE PLM
User verification record
in CRJE PLM
field descriptions
function
map
microfiche
User work area
in TSO COMMAND PROC VOL6-PROTECT
pointer to in PPL
in TSO COMMAND PROC VOL6-TERMINAL
pointer to in PPL
in TSO COMMAND PROCESSOR VOL4-EXEC
in TSO COMMAND PROCESSOR VOL6-RUN
pointer to in PPL
User-written PORs
in GRAPHICS PROBLEM ORIENTED RTNS.
User-written routine
in INTRO. TO CONTROL PROGRAM LOGIC
User's eligibility, test for
in TSO COMMAND PROC VOL5-0PERATOR
User's parameter list
in CATALOG MANAGEMENT
in CONTROL PROGRAM WITH MFT
in TSO CATALOG MANAGEMENT
User's program
in TSO COMMAND PROCESSOR VOL2-CALL
processing
work area

30 GY30- 2027
30 GY30-2027
36 GY28-6776

32 GY28-66l4
36 GY27-7236
29 GY28-680l
36 GY28-6776
32 GY28-66l4

30 GY28-66l6

32 GY28-66l4
36 GY30- 2011
36 GY30- 2011
36 GY3 0- 2011

36 GY28-6776
36 GY28-6776
36 GY28-6774
36 GY28-6776
30 GY27-7110
36 GY28- 6605
36 GY28-6775
30 GY28- 6606
36 GY27-7128 . . ,
36 GY28-6745 ~
36 GY28-6772

USERDPCE. field in PARSMACS
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-677l
Userid
---rn-TSO COMAND PROC VOL2-CNCLISTATUS36
in TSO COMMAND PROC VOL2-DELETE
36
in TSO COMMAND PROC VOL6-PROTECT
36
in DAPB18
in PSCB
in TSO COMMAND PROCESSOR VOL1-ACCT 36

GY28-6772
GY28-6772
GY28-6776
GY28-677l

488

Userid - USRLEN
Userid
I in TSO COMMAND PROCESSOR VOL1-ACCT 36 GY28-6771
l--------------------------------------(continued)
in SYS1.BRODCAST data set
updating of
validation of
in TSO COMMAND PROCESSOR VOL1-LIST 36 GY28-6771
asterisk
current
first
first unique
level
maxinum (10)
tree structure
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
in TSO TMP & SERVICE ROUTINES
36 GY28-6770
part of fully qualified data set name
prefixing to data set name
USERID
in TSO COMMAND PROC VOL1-DELETE
36 GY28-6771
attributes
command list flags
data list
in DHED
indicator
name array
PDE pOinter
removal from UADS
system attributes of
in TSO COMMAND PROC VOL5-LISTDS
36 GY28-6775
in TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6775
in IDAREA
in PSCB
length
in TSO COMMAND PROC VOL5-0UTPUT
36 GY28-6775
in IKJEFF50
in operation
in TSO COMMAND PROCESSOR VOL1-ADD 36 GY28-6771
address of
data list
data list pointer
length of
system attributes of
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
changed
data list
data list, pointer to
DEQ

has been changed
length
level
system attribute
in TSO COMMAND PROCESSOR VOL3-EDIT 36
in TSO TMP & SERVICE ROUTINES
36
parameter type
USERID, in introduction
in TSO COMMAND PROCESSOR VOL6-SEND 36
Userid address buffer
in TSO COMMAND PROC VOL1-BROADCAST 36
Userid buffer length, calculation of
in TSO COMMAND PROC VOL1-SUBRTNS
36
USERID central command processor
in CRJE PLM
36
USERID command processor
in REMOTE JOB ENTRY
36
Userid data list
in TSO COMMAND PROCESSOR VOL1-ACCT 36
Userid message text, maximum size of
in TSO COMMAND PROC VOL1-BROADCAST 36
Userid prefixed to data set name
in TSO CO~MAND PROC VOL6-RENAME
36
USERIDPT" in control
in TSO COMMAND PROC VOL6-SUBMIT
36
USERIDPT, in EXITPARM
in TSO COMAND PROC VOL2-CNCL/STATUS36
Userids

in TSO COMMAND PROC VOL1-BROADCAST 36 GY28-6771
addition of
changes to
deletion of
matching of
maximum number per MAIL directory
record
message chaining
in use rid data list
USERIDS
in TSO COMMAND PROC VOLS-OPERATOR 36 GY28-6775
total number specified
table of, in COMMON
Users, authorized
TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771
Users, first time
in PL/I SYNTAX CHECKER PLM
29 GY33-8009

-rn

USERxxx, fields in COMMON
in TSO COMMAND PROCESSOR VOL1-ADD
USERxxxx, fields in NDLSTPDL
in TSO COMMAND PROCESSOR VOLl-ADD

36 GY28-6771
36 GY28-6771

USIDSUBF, field in CHNGPDL
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-6771
USINDFLG, field in CFLAGS
in TSO COMMAND PROCESSOR VOLl-CHNG 36 GY28-6771
USING

--rn ASSEMBLER

(F)
Using manual, best way of
in PL/I SYNTAX CHECKER PLM
Using PARADICT
in COBOL-TO-PL/l LCP
USING routine
in COBOL (F)
USING table
in COBOL (F)
USINGB
------rxlASSEMBLER (F)

21 GY26-3700
29 GY33-8009
29 GY33-7007
24 GY28-6382
24 GY28-6382
21 GY26-3700

USLCHN, field in SENDPDL
---rn-TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
USLFL, field in SENDPDL
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
USLLL, field in SENDPDL
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776

GY28-6773
GY28-6770

USLRES, field in SENDPDL
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776

GY28-6776

USLUSPTR, field in SENDPDL
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776

GY28-6771

USM-ROUT routine
- i n COBOL (F)

24 GY28-6382

GY28-6771
GY30-2011
GY30-2005
GY28-6771
GY28-6771
GY28-6776

USMG (broadcast data set labeling buffer)
in TSO COMMAND PROC VOL1-BROADCAST 36 GY28-6771
format of
function of
input to IEEVSD23
size of
USRID, field in IDAREA

---yn TSO COMMAND PROC VOL5-0PERATOR

36 GY28-6775
USRID, field in NLSTTAB
'
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

GY28-6776
GY28-6772

USRLEN, field in NLSTTAB
---rn-TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6771

489
USSL declaration
---rn PLII (F) COMPILER

29 GY28-6800

USSUBPCE. field in PARSMACS
in TSO COMMAND PROCESSOR VOL1-CHNG 36 GY28-6111
Utility
in LINKAGE EDITOR (F)
subroutines
list of
in ONLINE TEST EXECUTIVE PROGRAM
OLTEP routines
OLT program routines
Utility data set
in TSO COMMAND PROCESSOR VOL3-EDIT
definition
Utility file number
in CRJE PLM
Utility file number
in CRJE PLM
Utility files
in CRJE PLM
utility program
in CRJE PLM
Utility programs
in CATALOG MANAGEMENT
in DIRECT ACCESS DEVICE SPACE MGT.
as callers of DADSM routines
IBCDASDI
IEHIOSUP
in TSO CATALOG MANAGEMENT
Utility programs, types of
in UTILITIES
Utility routines
in ALGOL-TO-PL/l LCP
in FORTRAN IV-TO- PLll LCP
Utility task
in CRJE PLM

USSL - Validity

relocation of
V-type address constants
in FORTRAN IV (H) COMPILER
purpose of
V(1817)
in ALGOL-TO-PL/l LCP

25 GY28-6642

29 GY33-1006

31 GY28-6661
VALeNT

~TSO COMMAND PROCESSOR VOL6-SEND 36. GY28-6176

31 GY28-6651

36 GY28-6113
36 GY30-2011

field in COMMON
operation
VALCNT. field in COMMON
in TSO COMMAND PROC VOL5-0PERATOR 36 GY28-6115
VALCNT field in E02DATDF
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6114
VALDCMPL label
in TSO COMMAND PROCESSOR VOL6-RUN
in flowchart

36 GY28-6116

36 GY30-2011

VALGEN routine
---rn-COBOL (F)

24 GY28-6382

30 GY28-6606
30 GY28-6601

--rn PL/I

36 GY30-2011
36 GY30-2011

36 GY28-6145
32 GY28-6614
29 GY33-1006
29 GY33-1000
36 GY30-2011

UTSCAL switch
--ri}ONLINE TEST EXECUTIVE PROGRAM

31 GY28-6651

UT1CRA
--ri}COBOL-To-PL/l LCP

29 GY33-1001

UT1KEYS
in COBOL-To-PL/l LCP

29 GY33-1001

UT2KEYS
in COBOL-To-PL/l LCP

29 GY33-1001

UT4CRA
in COBOL-To-PLll LCP

29 GY33-1001

UWORKPTR. in PARSEINT
in TSO COMAND PROC VOL2-CNCL/STATUS36 GY28-6112

y in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6113
V (ENVIRONMENT option)
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
V-format data
in 1014 EMULATE FOR M/165
GY21-1228
definition
errors
postprocessing
reading and writing
routines that process
V-type address constant
in BASIC DIRECT ACCESS METHOD
30 GY28-6611
description of
enterea in calls list
in RLD processing

Valid

SYNTAX CHECKER PLM
29
attributes
characters
keywords
Validating
in ONLINE TEST EXECUTIVE PROGRAM
31
the device specifications
the test specifications
Validating ACCOUNT command users
in TSO COMMAND PROCESSOR VOLl-ACCT 36
Validating space allocation/deallocation
requests
in TSO COMMAND PROC VOL1-SUBRTNS
36
Validating user account number
in TSO COMMAND PROC VOLl-SUBRTNS
36
Validation
in TSO COMMAND PROC VOL1-DELETE
36
of account number
of node list Pstring
of password
Validity, TIA table
in TESTRAN
31
Validity bits
in MACHINE-CHECK HANDLER, M155/165 30
Validity bits in interruption code
in MACHINE-CHECK HANDLER, M155/165 30
Model 155
Model 165
Validity check
in CONTROL PROGRAM WITH MFT
36
in TSO COMMAND PROCESSOR VOL4-FREE 36
exi t routine for IKJPARS
Validity check, by Parse
in TSO COMMAND PROCESSOR VOLl-LIST 36
Validity check, PICTURE chain
in PL/I (F) COMPILER
29
Validity check command, indicates
in TSO COMMAND PROC VOL5-0PERATOR 36
Validity check entry points
in TSO COMMAND PROC VOL6-TERMINAL 36
LINNOCHK
LINSZCBK
SCNCKl
SCNCK2
SECNOCHK
Validity check exit
in TSO TMP & SERVICE ROUTINES
36
in Parse service routine
Validity check exit routine (IKJEFA43)
in TSO COMMAND PROCESSOR VOLl-LIST 36

GY33-8009

GY28-6651

GY28-6111
GY28-6111
GY28-6111
GY28-6111

GY28-6611
GY~1-1198

GY21-1198

GY21-1128
GY28-6114
GY28-6111
GY28-6800
GY28-6115
GY28-6116

GY28-6110
GY28-6111

IDV

490

Validity - Variables
Validity check exit routines
in TSO COMMAND PROCESSOR VOL7-TEST 36
entry names of
functions of
Validity Check Parameter List (VCEPARM)
in TSO TMP ~ SERVICE ROUTINES
36
format
use
Validity Check routine
in MVT SUPERVISOR
36
description of
entry point name(s) of
module name for
synopsis of
Validity check routines
in TSO COMMAND PROCESSOR VOL4-HELP 36
Vaxldity check subroutine
in MFT SUPERVISOR
36
entry point
functional description
module synopsis
in TSO COMMAND PROC VOL1-SUBRTNS
36
Validity-checking
in DIRECT ACCESS DEVIC~ SPACE MGT. 30
of duplicate name
module
in TSO COMMAND PROCESSOR VOL1-ADD 36
Validity checking of command buffer
in TSO COMMAND PROC VOL1-DELETE
36
Validity checking routines
36
in TSO COMMAND PROC VOL6-PROFILE
in TSO COMMAND PROCESSOR VOL4-EXEC 36
Validity checks
in TSO COMMAND PROC VOL6-WHEN/END 36
Validity of record format-IEBCOPY
in UTILITIES
32
VALUAT
----rilASSEMBLER (F)

GY28-6777

GY28-6770

GY28-6659

GY28-6774
GY27-7236

GY28-677l
GY28-6607
GY28-677l
GY28-6771
GY28-6776
GY28-6774
GY28-6776
GY28-66l4

21 GY26-3700

Value

---rn TSO

COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
conversion

VALUE
in TSO TMP ~ SERVICE ROUTINES
parameter type
Value, "hash" (INDEXMODULO)
in COBOL-TO-PL/1 LCP
Value (continued)
in TSO COMMAND PROCESSOR VOL7-TEST
specifying a value
subcommand processor)
Value call
in ALGOL (F) COMPILER
VALUE clause
in COBOL (F)
Value clause record
in COBOL-TO-PL/1 LCP
Value list
in TSO COMMAND PROCESSOR VOL4-EXEC
Value of array function
in PL/I SUBROUTINE LIBRARY
Value part
in ALGOL-TO-PL/1 LCP
Value scan
in PL/I (F) COMPILER
Values,
in TSO COMMAND PROCESSOR VOL4-EXEC
replacement
symbolic parameters
user-entered
Variable
in LINKAGE EDITOR (F)
adcon
base

36 GY28-6770
29 GY33-7007
36 GY28-6777

26 GY33-8000
24 GY28-6382
29 GY33-7007
36 GY28-6774
29 GY28-6801
29 GY33-7006
29 GY28-6800
36 GY28-6774

31 GY28-6667

dictionary entry
after common block processing
after coordinate assignment
after dictionary rechaining
after relative address
assignment
after XREF
equi valence
Variable called by name
in ALGOL-TO-PL/1 LCP
Variable called by value
in ALGOL-TO-PL/1 LCP
Variable Data Area
in PL/I (F) COMPILER
in AUTOMATIC chain
in pseudo-code phase
Variable data area (VDA)
in PL/I SUBROUTINE LIBRARY
Variable data area (VDA) usage
in PL/I SUBROUTINE LIBRARY
Variable length, in LSD
in TSO COMMAND PROC VOL6-WHEN/END
Variable-length blocked records
in COBOL (F)
Variable length blocks
in SEQUENTIAL ACCESS METHODS
Variable length field
in TSO COMMAND PROCESSOR VOL4-EXEC
Variable length records
in COBOL (F)
in SORT/MERGE
block/deblock modules for
completion codes
format codes
merging technique
movement of
move modules
nodes
sorting techniques
sort modules for
tree structure
Variable-length records for IEBISAM
in UTILITIES
Variable-length spanned records
in SORT/MERGE
Variable-length unblocked records
in COBOL (F)
Variable move
in SORT/MERGE
Variable Procedure Name Definitions
in COBOL (F)
Procedure A-Text format
Procedure IC-Text format
Variable Procedure Name References
in COBOL (F)
Procedure A-Text format
Procedure IC-Text format
Variable spanned records
in UTILITIES
IEBGENER
IEHMOVE
Variable storage accumlator
in PL/I (F) COMPILER
Variables
in LINKAGE EDITOR (F)
rechaining
relative addresses for
in'LOADER
ANSWER BOX
AREA CODE
BASE
BOTTOM
COMMON
CRRNT CHAR
CRRNT CHAR CNT
EQUIVALENCE

29 GY33-7006
29 GY33-7006
29 GY28-6800

29 GY28-6801
29 GY28-6801
36 GY28-6776
24 GY28-6382
30 GY28-6604
36 GY28-6774
24 GY28-6382
33 GY28-6597

32 GY28-6614
33 GY28-6597
24 GY28-6382
33 GY28-6597
24 GY28-6382

24 GY28-6382

32 GY28-6614

29 GY28-6800
31 GY28-6667
31 GY28-6714

491
Variables
I in LOADER
31 GY28-6714
L--------------------------------------(continued)
LAST CHAR CN!'
LAST SOURCE CHAR
MPAC1 and MPAC2
PROGRAM BREAK
scalar
scan control
status
TOP
in PL/I (F) COMPILER
29 GY28-6800
aliasing
RDV for CONTROLLED or BASED
symbol table
in PL/I SYNTAX CHECKER PLM
29 GY33-8009
checking of (IKM135)
dot qualified
masks for (COMFLAG2)
pointer qualified
structured (dot qualified)
subscript reference
VARIABLES
in FORTRAN IV (E)
25 GY28-6601
assignment of relative addresses
for
dictionary entries for
Variants of syntax checker
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

VARSGxxx fields in E01DATDF
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6774
VARTST UKM22)
---rn-P~I SYN!'AX CHECKER PLM
29 GY33-8009
subroutines for record I/O option
arguments
~ary

channel decision table
in MVT JOB MANAGEMENT
VARY command
in GRAPHIC JOB PROCESSOR SUPPORT
example of use in GJP
operations
processing the
in JOB MANAGEMENT
VARY commands
in CONTROL PROGRAM WITH MFT
in MVT JOB MANAGEMENT
descriptions of
use of
VARY OFFGFX command
in S/360 JOB PROCESSING 1130/2250
example of
processing of
VARY ONGFX command
in S/360 JOB PROCESSING 1130/2250
example of
processing of
Vary queue element (VQE)
in MVT SUPERVISOR
format of
Vary Storage Offline routine
in MVT SUPERVISOR
description of
synopsis of
VARYING (keyword attribute)
in PL/I SYNTAX CHECKER PLM
attribute classification
in ENTRY, PROCEDURE statements
in RETURNS attribute list
Varying devices offline
in ONLINE TEST EXECUTIVE PROGRAM
rARYING option

36 GY28-6660
36 GY27-7159

36 GY28-6613
36 GY27-7128
36 GY28-6660

36 GY27-7166

36 GY27-7166

36 GY28-6659
36 GY28-6659

Variables - VF
in COBOL (F)
Varying string records
in PL/I SUBROUTINE LIBRARY
VARYING strings
in PL/I SUBROUTINE LIBRARY

29 GY28-6801

VARYTB table
in COBOL (F)

24 GY28-6382

24 GY28-6382
29 GY28-6801

VARY1, in MSGPARM
COMAND PROC VOL2-CNCL/STATUS36 GY28-6772

---rn TSO

VARY2, in MSGPARM
TSO COMAND PROC VOL2-CNC~STATUS36 GY28-6772

---rn

VBS (ENVIRONMENT opti on)
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

VCEPARM
in TSO TMP & SERVICE ROUTINES

36 GY28-6770

VDA
--in PL/I (F) COMPILER
VDA (Variable Data Area)
in PL/I SUBROUTINE LIBRARY
VDA usage
in PL/I SUBROUTINE LIBRARY
Verb analysis routines
in COBOL (F)
Verb identification routine
in JOB MANAGEMENT
Verb strings
in COBOL (F)
VERBT2
---rn-COBOL (E)

29 GY28-6800
29 GY28-6801
29 GY28-6801
24 GY28-6382
36 GY28-6613
24 GY28-6382
24 GY24-5009

Verification
in MFT SUPERVISOR
36 GY27-7236
of program repair
Model 155
Model 165
of registers
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
definition
Verification
function
in MACHINE-CHECK HANDLER, M135/145 30 GY27-7237
VERIFY built-in function
--rxlPL/I (F) COMPILER
29 GY28-6800
VERIFY instructions
in PL/I (F) COMPILER
29 GY28-6800
Verify member name
in TSO COMMAND PROCESSOR VOL2-CALL 36 GY28-6772
Verify message
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
definition
function
handling
VERIFY subcommand
in TSO COMMAND PROCESSOR VOL3-EDIT 36 GY28-6773
summary of o~ration
syntax
Veritcal offset field
in TSO COMMAND PROCESSOR VaLl-ADD

36 GY28-6771

Version 5 (PL/I syntax F-level)
in PL/I SYNTAX CHECKER PLM

29 GY33-8009

VF painter
in TESTRAN

37 GY28-6611

29 GY33-8009

37 GY28-6651

I!I

492

VICE - Volume

VICE
----rn TSO CATALOG MANAGEMENT

36 GY28-6145

VIRCTR counter
in COBOL (F)

24 GY28-6382

VIRPTR table
in COBOL (F)

24 GY28-6382

VIRRTN routine
-rilCOBOL (F)

24 GY28-6382

Virtual Definitions
in COBOL (F)
Procedure A-Text format
VIRTUAL field
in COBOL (F)
Virtual origin slot of dope vector
in PL/I (F) COMPILER
Virtual References
in COBOL (F)
Procedure A-Text format
VLC
--in COBOL (F)
definition
VLC numbers
in COBOL (F)
VLC-O fields
in COBOL (F)

24 GY28-6382
24 GY28-6382
29 GY28-6800
24 GY28-6382

24 GY28-6382
24 GY28-6382
24 GY28-6382

VLCCTR counter
in COBOL (F)

24 GY28-6382

VLCI field
----rn COBOL (F)

24 GY28-6382

VLCIMX
in COBOL (F)

24 GY28-6382

VLCTR counter
--rn
COBOL (F)

24 GY28-6382

VN fields
- in COBOL (F)
VN-I fields
in COBOL (F)
VN numbers
in COBOL (F)
definition

24 GY28-6382
24 GY28-6382
24 GY28-6382

-rn

VNCl'R counter
COBOL (F)

24 GY28-6382

VNI field
--in COBOL (F)

24 GY28-6382

VNILOC field
in COBOL (F)

24 GY2 8- 63 82

VNSPEC
in ALGOL-TO-PL/l LCP

29 GY33-1006

-rn

VNTBL table
COBOL (F)

24 GY28-6382

VOLIDPTR
in TSO COMMAND PROC VOL6-RENAME
VOLIDPTR, field in CIRPARM
in TSO COMMAND PROC VOLl-DELETE

36 GY28-6116

VOLT
--in JOB MANAGEMENT

36 GY28-6112
36 GY28-66l3

Volume
in INTRO. TO CONTROL PROGRAM LOGIC 36 GY28-6605

label
system residence
table of contents (VTOC)
in TSO COMMAND PROC VOLl-DELETE
36 GY28-6112
identification
list
serial number
in UTILITIES
32 GY28-6614
dumping of
ini tializing of
Volume affinity
in JOB MANAGEMENT
36 GY28-66l3
in MVT JOB MANAGEMENT
36 GY28-6660
Volume control block
in JOB MANAGEMENT
36 GY28-6613
volume control block (VCB)
in CATALOG MANAGEMENT
30 GY28-6606
in TOO CATAIDG MANAGEMENT
36 GY28-6145
Volume disposition
in FORTRAN IV (G) COMPILER
25 GY28-6638
closing a data control block
Volume information
in TOO COMMAND PROC VOL5-LISTDS
36 GY28-6115
Volume list
in JOB MANAGEMENT
36 GY28-66l3
in TSO COMMAND PROC VOL6-PROTECT
36 GY28-6116
pointer to in SVCPARMS
Volume look-up-IEHPROGM
in UTILITIES
32 GY28-6614
Volume mounter-IEHMOVE
in UTILITIES
32 GY28-6614
Volume mounting for
in UTILITIES
32 GY28-6614
IEHPROGM, IEHMOVE, and IEHLIST
Volume mOving or copying a
in UTILITIES
32 GY28-6614
restoring of
scratching a data set from
table of contents, listing of
modifying of
writing of
Volume searching (direct
access)
in FORTRAN IV (G) COMPILER
25 GY28-6638
Volume serial identification
in TSO COMMAND PROC VOLS-LISTDS
36 GY28-6115
Volume serial number
in CATALOG MANAGEMENT
30 GY28-6606
of cataloged data set
volume control blocks and data set
pointer entry)
of control volume
in TSO CATALOG MANAGEMENT
36 GY28-6145
of cataloged data set
of control volume
in TSO COMMAND PROC VOL1-BROADCAST 36 GY28-6111
in TOO COMMAND PROC VOL4-LISTBC
36 GY28-6114
in TSO COMMAND PROCESSOR VOL4-EXEC 36 GY28-6114
in TSO COMMAND PROCESSOR VOL4-HELP 36 GY28-6114
Volume serial number, field
in TSO COMMAND PROC VOL2-ALLOCATE 36 GY28-6112
Volume serial number, field in DAPB08
in TOO COMMAND PROCESSOR VOLl-CALL 36 GY28-6112
Volume serial number procurement routine
in ONLINE TEST EXECUTIVE PROGRAM
31 GY28-6651
Volume serial numbers
in JOB MANAGEMENT
36 GY28-6613
list of
processing
Volume summary
in 1014 EMUIATE FOR M/165
GY21-1228
postprocessor
preprocessor
Volume table (VOLT)
in JOB MANAGEMENT
36 GY28-6613
construction of

493
Volume table (VOLT)
I in JOB MANAGEMENT
36 GY28-6613
L--------------------------------------(continued)
description Of
in MVT JOB MANAGEMENT
36 GY28-6660
Volume table of contents
in DIRECT ACCESS DEVICE SPACE MGT. 30 GY28-6607
capacity
conversion, DOS to OS
description
error processing
initialization
placement
update for Allocate
in UTILITIES
32 GY28-6614
listing of
modifying of
writing of
Volume table of contents (VTOC)
in CATALOG MANAGEMENT
30 GY28-6606
in TSO CATALOG MANAGEMENT
36 GY28-6745
Volume verification
in FORTRAN IV (G) COMPILER
25 GY28-6638
open routine
Volumes
in MVT JOB MANAGEMENT
36 GY28-6660
private
public
reserved
resident
shared
Volumes processing
in TSO COMMAND PROC VOL5-LISTCAT
36 GY28-6775
diagram of
VQE
in MVT SUPERVISOR
\VRBSCN routine
in COBOL (F)

36 GY28-6659
24 GY28-6382

VRE records
--in SORT/MERGE
block/deblock modules for
merging technique
VS (ENVIRONMENT option)
in PLII SYNTAX CHECKER PLM
VS record processing
in UTILITIES
VTOC
in TSO COMMAND PROC VOL5-LISTDS
VTOC (Volume Table of Contents)
in TSO COMMAND PROC VOL6-PROTECT
VTOC and IPL records-IEHDASDR
in UTILITIES
VTOC format routines
in UTILITIES

33 GY28-6597

29 GY33-8009
32 GY28-6614
36 GY28-6775
36 GY28-6776
32 GY28-6614
32 GY28-6614

VTOCS

---rn TSO COMMAND

PROC VOL2-DELETE

36 GY28-6772

Wait
---rn INTRO. TO CONTROL PROGRAM LOGIC 36 GY28-6605
macro instruction
routine
state
in TCAM SERVICEABILITY AIDS
30 GY30-2027
Background Reader wait
routine
dispatching the system wait
routine

Volume - WAITFLG
RCT main wait
permanent error wait
TSC main wait
permanent error wait
WAIT
in MFT SUPERVISOR
count
entry point
flowchart
functional description
module description
module synopsis
multiple-event
WAIT (keyword statement)
in PL/I SYNTAX CHECKER PLM
checking of
event-name in
subroutine ISWAIT
WAIT (multiple)
in PL/I SUBROUTINE LIBRARY
Wait event control block (WECB)
in PL/I SUBROUTINE LIBRARY
wait List Element
in MFT SUPERVISOR
WAIT macro
in BASIC TELECOMM. ACCESS METHOD
WAIT macro instruction
in SEQUENTIAL ACCESS METHODS
WAIT macro instruction--BISAM
in INDEXED SEQUEN. ACCESS ~~THOD
WAIT macro instructions
in TSO COMMAND PROCESSOR VOL2-CALL
Wait module
in CRJE PLM
WAIT parameter in STIMER
in MFT SUPERVISOR
Wait routine
in MVT SUPERVISOR
description of
entry point name of
flowchart of
module name for
synopsis of
in TSO COMMAND PROCESSOR VOL3-EDIT
error and exceptional conditions
method of operation diagram
Wait Routine (IKASD084)
in GRAPHIC JOB PROCESSOR SUPPORT
chart
description
example of
in S/360 JOB PROCESSING 1130/2250
chart
description of
example of use of
Wait state
in MACHINE-CHECK HANDLER, ~ll35/145
in MACHINE-CHECK HANDLER, M155/165
codes
in MFT SUPERVISOR
Wait state messages
in MACHINE-CHECK HANDLER, M135/145
WAIT statement
in PL/I SUBROUTINE LIBRARY
WAIT statement, interface modules
in PL/I SUBROUTINE LIBRARY
WAIT statements, parameter list
in PL/I (F) COMPILER
wait time interval
in TELECOMMUNICATION ACCESS METHOD

36 GY27-7236

29 GY33-8009

29 GY28-6801
29 GY28-6801
36 GY27-7236
30 GY30-2001
30 GY28-6604
30 GY28-6618
36 GY28-6772
36 GY30-2011
36 GY27-7236
36 GY28-6659

36 GY28-6773

36 GY27-7159

36 GY27-7166

30 GY27-7237
30 GY27-7198
36 GY27-7236
30 GY27-7237
29 GY28-6801
29 GY28-6801
29 GY28-6800
30 GY3O-2029

WAITFG switch

---rrlONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

WAITFLG switch
in ONLINE TEST EXECUTIVE PROGRAM

37 GY28-6651

II
1m

494

Waiting - WBPBLOCK

Waiting
in QUEUED TELECOMM. ACCESS METHOD

used
30 GY30-2002

WAITIO macro instruction
in ONLINE TEST EXECUTIVE PROGRAM
37 GY28-6651
WAITIO Service module
in TELECOMMUNICATION ACCESS METHOD 30 GY30-2029
entry
functions
WAIT3 switch
in ONLINE TEST EXECUTIVE PROGRAM

WHATTECB
in TSO COMMAND PROC VOL6-WHEN/END
field in IKJWHEN

36 GY28-6776

WHCHAR

~TSO COMMAND PROC VOL6-WHEN/END

36 GY28-6776

field in IKJWHEN
WHCMD

37 GY28-6651

~ TSO COMMAND PROC VOL6-WHEN/END

36 GY28-6776

field in IKJWHEN
Warm start (system-supported
restart)
in MACHINE-CHECK HANDLER, M155/165 30 GY27-7198

WHCOMM

~TSO COMMAND PROC VOL6-WHEN/END

36 GY28-6776

field in IKJWHEN
Warmstart routine
in REMOTE JOB ENTRY
Warning
in FORTRAN IV (E)
definition of
WARNING
in COBOL-TO-PL/l LCP
Warning error
in ALGOL (F) COMPILER
Warning message
in ALGOL-TO-PL/l LCP
Warning messages
in FORTRAN IV (~)
generation of
in PL/I (F) COMPILER
in TSO COMMAND PROCESSOR VOL6-SEND
in IEEVSDIO
in introduction
operation
text of
WCMAX
in COBOL (F)
Weak external reference (WX)
~n BASIC DIRECT ACCESS METHOD
definition
non-resolution processing
resolution processing
in FORTRAN IV (H) COMPILER
definition of
processing

36 GY30-2005
25 GY28-6601

36 GY28-6776

29 GY33-7007
26 GY33-8000

WHENWAS
in TSO COMMAND PROC VOL6-WHEN/END
field in IKJWHEN

36 GY28-6776

29 GY33-7006
25 GY28-6601
29 GY28-6800
36 GY28-6776

24 GY28-6382

WHERE subcommand processor (IKJEGWHR)
in TSO COMMAND PROCESSOR VOL7-TEST 36 GY28-6777
diagram of
flowchart of
module description of
text description of
Where-to-go (WTG) table
in FORTRAN IV (G) COMPILER
25 GY28-6638
Where-to-go table
in SEQUENTIAL ACCESS METHODS
30 GY28-660~
WHFILL
---rn-TSO COMMAND PROC VOL6-WHEN/END
field in IKJWHEN

36 GY28-6776

30 GY28-6617
WHGETM

~TSO COMMAND PROC VOL6-WHEN/END

36 GY28-6776

field in IKJWHEN
25 GY28-6642
WHILE

-rn ALGOL-TQ-PL/l LCP
WHILE (keyword option)

WEARTOGO table
in TSO COMMAND PROCESSOR VOL6-SEND 36 GY28-6776
WECB (Wait Event Control Block)
---rn PL/I SUBROUTINE LIBRARY

WHEN command
~n TSO COMMAND PROC VOL6-WHEN/END
control module
introduction
processing diagrams
processing summary

in PL/I SYNTAX CHECKER PLM
expression argument in DO
WHILE-element
in ALGOL-TO-PL/l LCP

29 GY33-7006
29 GY33-8009
29 GY33-7006

29 GY28-6801
WHLEN

WEF command handling routine
in EMULATOR FOR 7090/7094/709411
Weight factor
in BASIC DIRECT ACCESS METHOD
Weights. compare
in PL/I (F) COMPILER
Weights. stack
in PL/I (F) COMPILER
WGO routine
--in COBOL (F)
Wh-literal
in FORTRAN IV SYNTAX CHECKER PLM
WHATMOD
in TSO COMMAND PROC VOL6-SUBMIT
in history

35 GY27-7187
30 GY28-6617

-rn

TSO COMMAND PROC VOL6-WHEN/END
field in IKJWHEN

36 GY28-6776

WHMSGl
---rn-TSO COMMAND PROC VOL6-WHEN/END
field in IKJWHEN

36 GY28-6776

WHMSG2
---rn-TSO COMMAND PROC VOL6-WHEN/END
field in IKJWHEN

36 GY28-6776

WHPARMS
in TSO COMMAND PROC VOL6-WHEN/END
field in IKJWHEN

36 GY28-6776

WHPBLOCK
in TSO COMMAND PROC VOL6-WHEN/END
field in IKJWHEN

36 GY28-6776

29 GY28-6800
29 GY28-6800
24 GY28-6382
25 GY28-6831
36 GY28-6776

495
WHPL
---rn TSO COMMAND PROC VOL6-WHEN/END
field in II
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:56:37
Create Date                     : 2011:07:06 16:00:46-08:00
Modify Date                     : 2011:07:06 17:31:08-07:00
Metadata Date                   : 2011:07:06 17:31:08-07:00
Producer                        : Adobe Acrobat 9.43 Paper Capture Plug-in
Format                          : application/pdf
Document ID                     : uuid:07e84593-14d2-4184-b770-b41fbd19593e
Instance ID                     : uuid:69b016c4-ebaf-43ef-bf1b-a73eda30dc4e
Page Layout                     : SinglePage
Page Mode                       : UseOutlines
Page Count                      : 508

EXIF Metadata provided by EXIF.tools