Hub Connect Installation Instructions

User Manual:

Open the PDF directly: View PDF PDF.
Page Count: 6

HubConnect 1.2
Installation Instructions!
Multi-Platform, Real-Time Device Intercommunication
Minimum System Requirements:!
•1 Hubitat Hub (Coordinator).#
- AND -!
•1 Hubitat Hub (Remote)#
- OR -!
•1 SmartThings Hub (Remote)#
Please note that the HubConnect apps are not released under any open-source license. Be
sure to read the license agreement before installing.!
HUBCONNECT MULTIPLATFORM DEPLOYMENT
Before installing HubConnect it is important to designate one Hubitat hub to act as the the
coordinator or "server". The server hub will be responsible for managing the links to all of the
remote hubs, managing custom device drivers, and reporting the up/down status of the remote
hubs.!
On designated Server Hub, perform the following pre-installation steps:!
1. Install the HubConnect Server (container) app:#
1. In the left menu, click Apps Code, then New App.!
2. Click Import located near the top-right of the page.!
3. Paste the following URL into the input:#
#
https://raw.githubusercontent.com/HubitatCommunity/HubConnect/master/Hubitat/
apps/HubConnect-Server.groovy#
4. Click Import.#
2. Install the HubConnect Server Instance app:#
1. In the left menu, click Apps Code, then New App.!
2. Click Import located near the top-right of the page.!
3. Paste the following URL into the input:#
#
https://raw.githubusercontent.com/HubitatCommunity/HubConnect/master/Hubitat/
apps/HubConnect-Server-Instance.groovy#
4. Click Import.!
5. After import, click oAuth, then click Enable oAuth in App.!
6. Close the window.#
3. Install the HubConnect Remote Hub driver:#
1. In the left menu, click Drivers Code, then New Driver.!
2. Click Import located near the top-right of the page.!
3. Paste the following URL into the input:#
#
https://raw.githubusercontent.com/HubitatCommunity/HubConnect/master/Hubitat/
drivers/HubConnect-Remote-Hub.groovy#
4. Click Import.#
4. Optionally, install all drivers:#
#
For most environments, this step is optional as HubConnect will alert which drivers are
needed at the time of device selection. But for large systems, or those with a wide variety
of device types, it may be convenient to pre-install all device drivers. Follow the
instructions in step #3 above and import all of the following drivers located at:#
#
https://github.com/HubitatCommunity/HubConnect/tree/master/UniversalDrivers!
Once the Server or “coordinator” hub apps and drivers have been installed, install the
HubConnect Remote Client on all of the satellite hubs.!
Hubitat Remote Hub; perform the following pre-installation steps:#
1. Install the HubConnect Server Instance app:#
1. In the left menu, click Apps Code, then New App.!
2. Click Import located near the top-right of the page.!
3. Paste the following URL into the input:#
#
https://raw.githubusercontent.com/HubitatCommunity/HubConnect/master/Hubitat/
apps/HubConnect-Remote-Client.groovy#
4. Click Import.!
5. After import, click oAuth, then click Enable oAuth in App.!
6. Close the window.#
2. Optionally, install all drivers:#
#
Since the majority of communications flow form remote hub to server hub, this step is
largely unnecessary. For any devices linked from the Server hub to the Remote hub,
HubConnect will still alert which drivers are needed at the time of device selection.#
#
However for large systems, or those with a large number of devices connected from the
Server hub, it may be convenient to pre-install all device drivers. Follow the instructions in
step #3 in the first section (“Install the HubConnect Remote Hub driver”) and import all of
the following drivers located at:#
#
https://github.com/HubitatCommunity/HubConnect/tree/master/UniversalDrivers$
SmartThings Remote Hub; perform the following pre-installation steps:!
1. Install the HubConnect Server Instance for SmartThings app:#
1. Log into the SmartThings IDE, click + New SmartApp.!
2. Click the From Code tab located near the top-left of the page.!
3. Paste the following URL into the input:#
#
https://raw.githubusercontent.com/HubitatCommunity/HubConnect/master/
SmartThings/HubConnect-Remote-Client.groovy#
4. Click Create.!
5. After import, click App Settings, then click OAuth!
6. Click Enable OAuth in Smart App!
7. Click Update!
8. Close the window.#
2. Optionally, install all drivers:#
#
Since the majority of communications flow form remote hub to server hub, this step is
largely unnecessary. For any devices linked from the Server hub to the Remote hub,
HubConnect will still alert which drivers are needed at the time of device selection.#
#
However for large systems, or those with a large number of devices connected from the
Server hub, it may be convenient to pre-install all device drivers. Follow the instructions in
step #3 above and import all of the following drivers located at:#
#
https://github.com/HubitatCommunity/HubConnect/tree/master/SmartThings/DeviceTypes#
#
Not all Device Types are currently supported in SmartThings. For those that do not appear
in the folder above, please import the equivalent Universal Driver found at:#
#
https://github.com/HubitatCommunity/HubConnect/tree/master/UniversalDrivers#
#
Once HubConnect Remote Client has been installed on all of the satellite hubs, move on to
connecting them to the Server Hub.!
Connecting a Hub:!
1. On the Master hub, go to the HubConnect Server for Hubitat app.#
2. Click Connect a Hub#
3. At the Main Menu, Click Connect to Client Hub!
1. Enter a Friendly Name for the hub.!
2. Enter the Private LAN IP Address of Client Hub of the remote Hub (even if the hub is not
on the same LAN or in the same location)!
3. Choose the Type of Remote Hub:
1. Hubitat (LAN) - Remote hub is on the same LAN and IP subnet as the Server.!
1. Choose one of the following connection methods (this setting can be changed
at any time):!
1. Hubitat oAuth (http) - Uses https calls for every event. Great for small
systems or system with less than 70% of remote devices connected to the
server.!
2. Hubitat Event Socket - Recommended for maximum performance when at
least 60% of remote devices will be connected to the server.!
2. Hubitat (Internet) - Remote hub is connected via Hubitat cloud over the internet.!
3. SmartThings - Remote hub is a SmartThings hub which connects using the Hubitat
Cloud to the SmartThings cloud.!
4. Copy the Connection Key shown in the text box. You will need to paste this into the
Remote Client.#
4. Click Done#
5. Switch over to the Hubitat web UI (or SmartThings app) for the Remote Hub being
connected. Then go to the HubConnect Remote Client app.#
6. Click Connect to Server Hub!
1. Enter the Local LAN IP Address of the Server Hub (even if the hub is not on the same
LAN or in the same location)!
2. Paste the Server Hub’s Connection Key (copied from step 3.4 above) into the Paste the
server hub's connection key here input.!
3. Press Enter or click away from the field.!
4. The client will attempt to contact the Server hub. In a few seconds the UI should
update to show a “Connected!” status if successful. If not, an error message should be
displayed.!
5. If the connection is successful, Click Done!
7. The Remote Client will exit back to the apps list. To select devices on the Remote Hub to
connect to the Server hub, navigate back to the HubConnect Remote Client app.#
1. Click Select Devices to Synchronize to Server Hub…!
2. Select devices on the Remote that you wish to have connected to the Server hub.!
3. If the drivers were not previously installed, make sure all of the recommended device
drivers are installed on the Remote Hub prior to clicking Done.#
8. Enjoy using HubConnect!

Navigation menu