I61200637G2 8_NV818 8 NV818

User Manual: I61200637G2-8_NV818

Open the PDF directly: View PDF PDF.
Page Count: 2

Ethernet is the undisputed global choice for
Metro Access Networks (MANs) and Local
Access Networks (LANs). However, existing
copper access networks do not facilitate an
end-to-end high-bandwidth connection,
creating a bottleneck. This bottleneck is the
first mile of access. This refers to the access
link (most often a TDM-based copper circuit)
from the business customer’s office LAN to
their service providers MAN. ADTRAN
offers service providers the ability to remove
this bottleneck through the utilisation of an
improved data transmission standard. This
standard, ITU-T G.998.2, is known as Ethernet
in the First Mile (EFM). ADTRAN EFM over
Copper (EoCu) and TDM (EoTDM) defines
a way to effectively and universally bond
together, lower bandwidth copper loops or
pairs of wires creating a Carrier Ethernet
access connection.
This innovative EoCu/EoTDM solution
enables service providers to extend packet-
based business-class services beyond the reach
of their fibre network by leveraging the existing
investment of copper-based TDM business
services assets. This means leveraging the full
advantages of TDM, the most understood,
successful, and ubiquitous business service
infrastructure. Due to budget restrictions and
time to market requirements, deploying fibre
to address uneven or disperse service demand
is not feasible, leaving a large percentage of
businesses to rely on copper business access.
NetVanta 818
Eight-Port, DS1/E1 EFM Ethernet NTU
Product Features
■ 8-port EFM (g.Bond)
bonded DS1 or E1
■ Up to 12 Mbps (over DS1) or
16 Mbps (over E1s) of resilient
Carrier Ethernet service
■ Certified MEF9, 14 Traffic
Management Compliant
■ 1 RMU stackable with wall-
mount or rackmount options
■ Rapid deployment via
EZ-Ethernet Provisioning
■ Standards-based
OAM supported
■ Monitoring, fault detection,
and loopback functions
■ Flexible bandwidth
management
■ Performance monitoring
with threshold alarms
■ Configurable queuing for
CoS support
■ Command Line Interface (CLI)
■ Traffic storm protection to
prevent service interruptions
due to broadcast, multicast,
unicast or L2CP traffic
■ Small Form-factor Pluggable
(SFP) 1000Base-X Ethernet
■ Autosensing 10/100 Base-T
Ethernet connections
■ Industry-leading warranty
Quality of Service Flexibility and Assurance
The NetVanta 800 Series delivers packet flow
capabilities that are certified compliant per
the Metro Ethernet Forum. These packet flow
capabilities offer the traffic classification and
bandwidth profiling capabilities required to
offer customers a flexible, tiered service offer.
In addition to this highly configurable, granular
bandwidth selection toolset which provides
Quality of Service (QoS) options, these same
network termination points support the
standards-based measurement and monitoring
capabilities required to maintain a carrier-
grade Ethernet network. All of this allows
providers to create and meet customer
SLA agreements.
Simplified Service Delivery
In order to improve service time to
market and reduce deployment costs, the
NetVanta 800 Series delivers a feature set
designed to simplify service deployment and
maintenance. ADTRAN Advanced Operational
Environment (AOE) employs EZ-Ethernet
Provisioning, minimising the number of steps
to provision a new service. The EIA-232 craft
port enables local access for configuration and
status information. A management VLAN is
used to remotely configure and collect
status information.
Smart Solutions for a
Connected World.
DSLAM
4 x 10/100Base-T
or GigE SFP
NetVanta 814
4 x 10/100Base-T
or GigE SFP
Metro Ethernet
& IP Core
1– 8 EFM Bonded
E1 Pairs
LAN
Router
NetVanta 818
1-8 EFM Bonded
E1 Pairs
NxGigE
NetVanta 818
4 x 10/100Base-T
or GigE SFP
1– 4 EFM Bonded
E1 Pairs
Small/Medium
Business
10 RU
Total Access 5000 (ETSI)
8-port EFM over DS1 or E1
ADTRAN, Inc.
International Department
U.S. Headquarters
901 Explorer Boulevard
Huntsville, Alabama 35806
www.adtran.com/global
+1 256 963 8000
+1 256 963 6300 fax
international@adtran.com
International Customer Service
+1 256 963 8716
Asia—Beijing, China
+86 10 8527 5011
sales.china@adtran.com
Asia—Hong Kong
+852 3187 7111
sales.asia@adtran.com
Asia—Singapore
+65 6232 2305
sales.asia@adtran.com
Australia/New Zealand—
Melbourne, Australia
+61 3 9658 0500
sales.australia@adtran.com
Australia/New Zealand—
Sydney, Australia
+61 2 8456 0101
+61 2 8456 0105
sales.australia@adtran.com
Canada Headquarters—
Toronto, Ontario
+1 877 923 8726
+1 905 625 2515
sales.canada@adtran.com
Canada—Montreal, Quebec
+1 877 923 8726
+1 514 940 2888
sales.canada@adtran.com
Europe, Middle East and Africa
Headquarters—Munich Germany
+49 89 411097 111
sales.europe@adtran.com
Germany
+49 89 411097 111
sales.germany@adtran.com
Central/East Europe
+49 89 411097 111
sales.cee@adtran.com
South Europe
+49 89 411097 111
sales.southeurope@adtran.com
West/North Europe
+44 1189 317080
sales.wne@adtran.com
Middle East and Africa
+49 89 411097 111
sales.mea@adtran.com
Mexico and Central America
+1 256 963 3321
+1 52 55 5280 0265 Mexico
sales.mexico@adtran.com
South America
+1 256 963 3185
sales.brazil@adtran.com
sales.latam@adtran.com
NetVanta 818
Eight-Port, DS1/E1 EFM Ethernet NTU
Services Scale and Flexibility
o MEF 9, 14 compliant EPL, EVPL, ELAN
o Configurable EtherType and TPID for
service flexibility
o VLAN IDs 0–4095; EVC configurable in the
range of 2–4094
o Configurable MTU Mini Jumbo frame support
(1700 Bytes)
o 16k active MAC address; Ability to disable MAC
learning (32k support future software)
o Ingress policers (tr3CM), CIR and EIR settings to
64 kbps granularity, Configurable Burst through
EBS, CBS settings
o Egress shaping per port (per port per queue
and per up to 16 VLAN groups in future)
Resources
o 64 EVCs o 64 EVC Maps
o 64 Policers o 4 EFM Group
Fault and Performance Management
IEEE 802.3ah EFM standard
ITU-T Y.1731 CFM, PM
Supports OAM management status and
loopback messaging
Supports Terminal and Facility MAC-Swap Loopback
Management and Administration
Management Methods
Craft interface (Local, EIA-232)
SNMP proxy via Total Access 5000
Firmware upgrades
Local: YMODEM through craft port
Remote: Managed through Total Access 5000
Configuration script download
Regulatory Agency Approvals
FCC Part 15 Class A
FCC Part 68
UL 60950, CAN/CSA C22.2 No. 60950
EN 60950, IEC 60950, AS 3260/ AS NZS60950
NEBS Level 3
S043.2
ITU-T K21:2000 Basic
Ordering Information
Equipment Part #
NetVanta 818 1200637G2
48VDC Power Supply, EU Cord 1202470E2
48VDC Power Supply, UK Cord 1202470G3
48VDC Power Supply, AUS Cord 1202470L4
Physical Interface
Network Interface
DS1/E1 - RJ-21
Client Interface
Four Autosensing 10/100Base-T Ethernet
 oRJ-45 o Auto MDI/MDIX
 oAuto-Rate o Auto-Duplex
Gigabit Ethernet interface via SFP cages
All Ethernet ports may be used for either network
WAN or customer-side LAN connections
Gigabit Ethernet Interface
Connector: Single SFP
Interface Type: 1000 Base-X
Compliance: 802.3, 802.1D, 802.1Q
Management: Console Port
DB-9 EIA-232
Diagnostics LEDs
Power/Alarm LED ■Ethernet LED
SHDSL Loop Status for Each Loop
Environment
Operating Temperature: -40 C to +65C (-40 to +149F)
Storage Temperature: -40C to +85 C -40 to +185F()
Relative Humidity: Up to 95%, Non-condensing
Physical Specifications
Dimensions: 44 mm x 437 mm x 254 mm (H x W x D)
(1.75 in. x 17.2 in. x 10 in.)
Weight: 3.6 kg (8 lbs)
DC Power: -48 VDC or +/-24 VDC (A or B power feed)
Power Dissipation: 17.5 watts maximum
Ethernet Features
IEEE 802.1p priority marking
IEEE 802.1d dynamic/transparent bridging
IEEE 802.1Q VLAN tagging
IEEE 802.3u Ethernet
MEF 9/14 certified EPL, EVPL, ELAN
Ethernet Services Support
Priority queuing of traffic based on VLAN priority
o Supports eight class of service queues
o Per UNI port, CE VLAN ID (C-Tag) and/or CE VLAN
P-bits, DSCP fields
Single stack VLAN and double stack VLANs (Q-in-Q)
o Manipulation based on 802.1p and DSCP fields
o STAG TPID provisioning supports 802.1ad and
802.1Q standards
o Port-based service support
TL19.1270
I61200637G2-8B February
Copyright
©
2013 ADTRAN, Inc.
All rights reserved.
ADTRAN is an ISO 9001, ISO 14001,
and a TL 9000 certified supplier.
ADTRAN believes the information in this publication to be accurate as of publication date, and is not responsible for error. Specifications subject to change
without notice. ADTRAN and NetVanta are registered trademarks of ADTRAN, Inc. and its affiliates in various countries. All other trademarks mentioned in
this document are the property of their respective owners.
ADTRAN warranty duration and entitlements vary by product and geography. For specific warranty information, visit www.adtran.com/warranty
ADTRAN products may be subject to U.S. export controls and other trade restrictions. Any export, re-export, or transfer of the products contrary to law is
prohibited. For more information regarding ADTRAN’s export license, please visit www.adtran.com/exportlicense

Navigation menu