IBM Workpad C3 Getting Started C3strt

User Manual: IBM Workpad c3 Getting Started La Biblioteca de los 8 bits

Open the PDF directly: View PDF .
Page Count: 8

Download
Open PDF In Browser	View PDF

Troubleshooting and Contacts
Register your WorkPad c3 PC companion
Please take a few moments to provide us with information that will help IBM to better
serve you in the future. Your responses are valuable to us in developing products and
services that are important to you, as well as in developing better ways to communicate with you.
• Register today on the World Wide Web!
http://www.pc.ibm.com/register/
Before calling technical support, try this:
• Charge your companion as described earlier in this guide. Make sure all the
connections between the companion, cradle, computer, and power source are secure.
• Perform a soft reset by unscrewing the top of your stylus and using the pin inside
to gently press the reset button on the back of your companion.

Your PC Companion

• If your companion still doesn’t turn on, perform a hard reset by holding down the
black power button while doing a soft reset. Then release the power button.
For IBM HelpCenter service and support information see the “Handbook
for the WorkPad c3 PC companion” for more details.
Note: There are thousands of third-party applications available for the Palm
Computing® platform. For questions and support, please contact the
software developer.

Getting Started

Charge your WorkPad®c3 PC companion

Install your desktop software

Palm™ Desktop for IBM® WorkPad inclu
WorkPad c3 PC companion: Address Bo
Expense, and desktop e-mail connectivit
feature of this software to back up and ex
and your computer.

Before you use your new WorkPad c3 PC companion, you need to connect the cables
and charge it for three hours. Afterwards, it takes only a few minutes a day to recharge
it during regular use.
Important: Before using this information and the product it supports, read the general and safety
information under "Notices" in the Handbook for the WorkPad c3 PC Companion.
Danger: To avoid a shock hazard, do not connect or disconnect any cables or perform installation,
maintenance, or reconfiguration of this product during an electrical storm.

Insert the AC adapter cable into the back of the
cradle connector, and then turn off your computer.

Connect the cradle to a COM
(serial) port on your computer,
and then plug the AC adapter
into a wall outlet.

Note: If you are using Microsoft Outloo
instead of Palm Desktop for IBM
this process to install HotSync M

Insert the Palm Desktop for IBM W
When the menu appears, click the Install
screen. While you’re here, take a look at

Explore the software by double-click
on your desktop. When the screen below
click the New button and enter your data
icon and entering your own name and ad
Tip:

You can also select Import from
another application.

Application icons
If necessary, use the included
serial port adapter.

Charge your companion by placing it
in the cradle and making sure the cradle
light is on. As your companion begins its
3-hour charge, you can continue with the
set up process.

Cradle light

cluded

Install your desktop software
Palm™ Desktop for IBM® WorkPad includes the same main applications as your
WorkPad c3 PC companion: Address Book, Date Book, To Do List, Memo Pad,
Expense, and desktop e-mail connectivity. You can use the HotSync® Manager
feature of this software to back up and exchange data between your companion
and your computer.
Note: If you are using Microsoft Outlook or other desktop organizer software
instead of Palm Desktop for IBM WorkPad software, you still need to
complete this process to install HotSync Manager.

4.
5.

Insert the Palm Desktop for IBM WorkPad CD-ROM into your CD-ROM drive.
When the menu appears, click the Install button and follow the instructions on the
screen. While you’re here, take a look at the Quick Tour.
Explore the software by double-clicking the Palm Desktop for IBM WorkPad icon
on your desktop. When the screen below appears, click an application icon. Then
click the New button and enter your data. For example, try clicking the Address
icon and entering your own name and address.
Tip:

You can also select Import from the File menu to import data from
another application.

Explore your new WorkPadc3
Contrast Control
Press here to display the
onscreen contrast controls.

IR Port
Exchange
with any
WorkPad
Palm Com
devices n

Cover
Remove the stylus from either of
the stylus slots to insert the cover.
Applications Launcher
Tap the Applications icon to see
all your applications.
Graffiti® Writing Area
Use the stylus to enter Graffiti®
text and numbers here, or to
access the onscreen keyboard.
HotSync® Button
Press the HotSync® button to
exchange data between your
companion and computer.

Application icons

HotSync® Cradle
Connect the cradle to your
computer and a power source.
Then place your companion in
the cradle to charge it.

Date Book

Addres

Applicatio
Press these
immediatel

Charge your WorkPad®c3 PC companion

Note: If you are using Microsoft Outlook or other desktop organizer software
instead of Palm Desktop for IBM WorPad software, you still need to complete
this process to install HotSync Manager.

DANGER: To avoid a shock hazard, do not connect or disconnect any cables or
perform installation, maintenance, or reconfiguration of this product
during an electrical storm.

4.
Insert the AC adapter cable into the back of the
cradle connector, and then turn off your computer.

5.
2.

Connect the cradle to a COM
(serial) port on your computer,
and then plug the AC adapter
into a wall outlet.

You can also select Import from the File menu to import data from
another application.

Explore your new WorkPadc3 PC companion
Contrast Control
Press here to display the
onscreen contrast controls.

IR Port
Exchange data and applications
with any infrared-enabled
WorkPad companions or other
Palm Computing® platform
devices nearby.

Application icons
If necessary, use the included
serial port adapter.

Charge your companion by placing it
in the cradle and making sure the cradle
light is on. As your companion begins its
3-hour charge, you can continue with the
set up process.

Scroll Buttons
Press the top half to
scroll up and the
bottom half to scroll
down.

HotSync® Cradle
Connect the cradle to your
computer and a power source.
Then place your companion in
the cradle to charge it.

Date Book
Cradle light

Power Button
Press here to turn your
companion on and off. Hold
it down for a few seconds to
turn on the screen backlight.

Address Book

To Do List

Memo Pad

Applications Buttons
Press these buttons to turn on your companion and
immediately access your main applications.

Three ways to enter data into your WorkPadc3 PC companion
After your WorkPad c3 PC companion completes its initial 3-hour charge, turn it on,
remove the plastic sheet from the screen, and follow the setup instructions on the screen.
Hint: If your companion does not turn on, see Troubleshooting and Contacts on the
back of this guide.

Using your computer keyboard
Type information in your Palm™ Desktop for IBM WorkPad, and then place your
companion in the cradle and press the HotSync® button to exchange data between
your companion and computer.

Using the onscreen keyboard
Tap the text or a blank line on the companion screen. (The cursor should blink
to indicate you’re in edit mode.) Tap the dot under “abc” for the letter keyboard or the
dot under “123” for the number keyboard. Tap the characters and then tap Done.

Tip:
Tap abc , 123 , or Int’l to
switch keyboards.

Three ways to enter data into your WorkPadc3 PC companion

continued

Explore add-on software for you

Using Graffiti® power writing software
Graffiti® characters are similar to uppercase letters that are formed with a single stroke.
Your writing turns into text wherever the blinking cursor appears on the companion
screen. Graffiti writing is easy, fun, accurate, and fast (up to 30 words per minute).
It’s worth taking a few minutes to learn. Just remember to write BIG and press firmly.

Your WorkPad c3 PC companion support
come with it. You can easily expand your
loading any of the thousands of applicatio
variety of freeware, shareware, and comm

Download applications from www.pa
to the add-on folder in the Palm™ Deskto
(e.g., c:\WorkPad\add-on).

Unzip the application if it is a zipped

Select the application you want to in

• Running Instapp.exe from the Palm D
— or —
• Opening Palm Desktop for IBM WorkP
Write letters here

Next click Add and select the application
click Done.

Write numbers here

Congratulations!
You’ve connected your companion to your computer, installed the Palm™ Desktop for
IBM WorkPad, and learned how to enter data on your WorkPad c3 PC companion.

Copyright © 1998 3Com Corporation or its subsidiaries. All rights reserved. 3Com, Palm Computing, Graffiti, and HotSync
are registered trademarks, and Palm and the Palm Computing Platform logo are trademarks of Palm Computing, Inc., 3Com
Corporation or its subsidiaries. The following are registered trademarks of International Business Machines Corporation
in the United States and/or other countries: IBM and WorkPad. Other company, product and service brand names may
be trademarks, service marks or registered trademarks of their respective owners. Printed in U.S.A. P/N: 405-0428

Transfer your new applications to y
in the cradle and pressing the HotSync®
called a HotSync operation.)

Three ways to enter data into your WorkPadc3 PC companion

continued

Explore add-on software for your WorkPadc3 PC companion

Your WorkPad c3 PC companion supports much more than just the applications that
come with it. You can easily expand your companion’s software capabilities by downloading any of the thousands of applications available on the Internet including a wide
variety of freeware, shareware, and commercial applications. Just follow these steps:

Download applications from www.palm.com (or any add-on software web site)
to the add-on folder in the Palm™ Desktop for IBM WorkPad folder
(e.g., c:\WorkPad\add-on).

Unzip the application if it is a zipped file.

Select the application you want to install by:
• Running Instapp.exe from the Palm Desktop for IBM WorkPad folder,
— or —
• Opening Palm Desktop for IBM WorkPad, and clicking Install.

Write letters here

Write numbers here

Next click Add and select the application you want to install, click Open, and then
click Done.

• If your companion still doesn’t turn on, perform a hard reset by holding down the
black power button while doing a soft reset. Then release the power button.

Transfer your new applications to your companion by placing your companion
in the cradle and pressing the HotSync® button on the cradle. (This procedure is also
called a HotSync operation.)

For IBM HelpCenter service and support information see the “Handbook
for the WorkPad c3 PC companion” for more details.
Note: There are thousands of third-party applications available for the Palm
Computing® platform. For questions and support, please contact the
software developer.

Congratulations!
You’ve connected your companion to your computer, installed the Palm™ Desktop for
IBM WorkPad, and learned how to enter data on your WorkPad c3 PC companion.

See back to learn more
Copyright © 1998 3Com Corporation or its subsidiaries. All rights reserved. 3Com, Palm Computing, Graffiti, and
HotSync are registered trademarks, and Palm Computing Platform logo is a trademark of Palm Computing, Inc., 3Com
Corporation or its subsidiaries. The following are registered trademarks of International Business Machines Corporation
in the United States and/or other countries: IBM and WorkPad. Other company, product and service brand names may
be trademarks,service marks or registered trademarks of their respective owners. Printed in U.S.A. P/N: 405-0428

Three ways to enter data into your WorkPadc3 PC companion

continued

Explore add-on software for your WorkPadc3 PC companion

Download applications from www.palm.com (or any add-on software web site)
to the add-on folder in the Palm™ Desktop for IBM WorkPad folder
(e.g., c:\WorkPad\add-on).

Unzip the application if it is a zipped file.

Select the application you want to install by:
• Running Instapp.exe from the Palm Desktop for IBM WorkPad folder,
— or —
• Opening Palm Desktop for IBM WorkPad, and clicking Install.

Write letters here

Write numbers here

Next click Add and select the application you want to install, click Open, and then
click Done.

• If your companion still doesn’t turn on, perform a hard reset by holding down the
black power button while doing a soft reset. Then release the power button.

Transfer your new applications to your companion by placing your companion
in the cradle and pressing the HotSync® button on the cradle. (This procedure is also
called a HotSync operation.)

Congratulations!
You’ve connected your companion to your computer, installed the Palm™ Desktop for
IBM WorkPad, and learned how to enter data on your WorkPad c3 PC companion.

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Create Date                     : 1998:10:04 21:45:50
Producer                        : Acrobat Distiller 2.1 for Power Macintosh
Modify Date                     : 1999:05:25 15:56:02
Page Count                      : 8

EXIF Metadata provided by EXIF.tools

IBM Workpad C3 Getting Started C3strt

Navigation menu

Versions of this User Manual:

Views

Navigation