99 1003 INST99
99-1003 to the manual d2955a58-dc1f-47c7-b04b-70353b092c1b
User Manual: 99-1003
Open the PDF directly: View PDF .
Page Count: 12
Download | |
Open PDF In Browser | View PDF |
INSTALLATION INSTRUCTIONS FOR PART 99-1003 APPLICATIONS KIA Rio 2001 Sephia 1995-2001 Spectra 2000-2001 Sportage 1995-2003 99-1003 KIT FEATURES • DIN Radio Provision KIT COMPONENTS A) Radio Housing #1 • B) Radio Housing #2 • C) Mounting Brackets • D) (4) Captive Studs • E) (4) Pal Nuts C B A E D WIRING AND ANTENNA CONNECTIONS (Sold Separately) • 70-1003 - KIA Harness 1995-02 • Antenna Adapter N/R TOOLS REQUIRED: Panel Removal Tool • Cutting Tool • Phillips Screwdriver 1-800-221-0932 www.metraonline.com © COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION 99-1003 TABLE OF CONTENTS Dash Disassembly - Kia Rio 2001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - Sephia 1995-1997 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - Sephia 1998-2001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - Spectra 2000-2001. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - Sportage 1995-1997 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - Sportage 1998-2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - Sportage 2001-2003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Kit Assembly - Kit Assembly Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 - DIN Radio Provision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 *Note: Refer also to the instructions included with the aftermarket radio. 99-1003 DASH DISASSEMBLY RIO 2001 OFF *Note: Refer also to the instructions included with the aftermarket radio. A 1 Disconnect the negative batteryterminal to prevent an accidental short circuit. A/C 2 Remove ashtray and (1) Phillips head screw inside ashtray cavity. (Figure A) 3 Remove knob from climate control slide lever. (Figure B) 4 Unsnap and remove radio/climate control trim panel. (Figure C) B OFF 5 Remove (4) Phillips head screws securing the radio. Unplug and remove the radio. A/C Continue to kit preparation. OFF C A/ 1 99-1003 DASH DISASSEMBLY SEPHIA 1995-1997 *Note: Refer also to the instructions included with the aftermarket radio. 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Remove plastic screw cover to the left of the coin tray and remove the Phillips head screw from behind cover. 3 Remove switch blank to the far right of the switch panel and remove the Phillips head screw from behind switch blank. 4 Unclip and remove dash trim panel. 5 Remove (4) Phillips head screws securing the radio. Unplug and remove the radio. Continue to kit preparation. 2 99-1003 DASH DISASSEMBLY SEPHIA 1998-2001 SPECTRA 2000-2001 *Note: Refer also to the instructions included with the aftermarket radio. 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Remove (1) Phillips head screw from above instrument cluster. 3 Unclip and remove dash trim panel. 4 Remove (4) Phillips head screws securing the radio. Unplug and remove the radio. Continue to kit preparation. 3 99-1003 DASH DISASSEMBLY SPORTAGE 1995-1997 *Note: Refer also to the instructions included with the aftermarket radio. 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Remove ashtray and (2) Phillips head screws inside ashtray cavity. 3 Unclip and remove dash trim panel. 4 Remove (4) Phillips head screws securing the radio. Unplug and remove the radio. Continue to kit preparation. 4 99-1003 DASH DISASSEMBLY SPORTAGE 1998-2000 *Note: Refer also to the instructions included with the aftermarket radio. 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove dash trim panel. 3 Remove (4) Phillips head screws securing the radio. Unplug and remove the radio. Continue to kit preparation. 5 99-1003 DASH DISASSEMBLY SPORTAGE 2001-2003 *Note: Refer also to the instructions included with the aftermarket radio. 1 Disconnect the negative battery terminal to prevent an accidental short circuit. A 2 Unclip and remove climate control/vent trim panel. (Figure A) 3 Remove screw covers from trim panel below steering column and remove screws from behind covers. Lower the trim panel (it is not necessary to remove the panel). (Figure B) B 4 Remove (3) Phillips head screws from bottom of steering column housing and remove both upper and lower sections of housing. 5 Remove (1) Phillips head screw from outside left edge of dash and (2) Phillips head screws from near hood release. (Figure C) C 6 Loosen nut behind hood release and remove lower left side dash trim. (Figure C) 7 Remove (4) Phillips head screws from instrument trim panel and remove panel. (Figure D) 8 Remove (4) Phillips head screws securing the radio. Unplug and remove the radio. D Continue to kit assembly. 6 99-1003 KIT PREPARATION KIT ASSEMBLY PREPARATION *Note: Refer also to the instructions included with the aftermarket radio. SEPHIA 1998-2001 SPECTRA 2000-2001 RIO 2001 SEPHIA 1995-1997 Cut and remove mounting tabs “B” from Radio Housing #2. (The tabs can be identified by the letter stamped on the back of each tab.) (Figure A) Cut and remove mounting tabs “B” from Radio Housing #1. (The tabs can be identified by the letter stamped on the back of each tab.) (Figure B) B A "B" "B" "B" "B" SPORTAGE 1995-1997 SPORTAGE 1998-2003 Cut and remove mounting tabs “A” from Radio Housing #1. Cut and remove tabs “B” from the mounting brackets. (The tabs can be identified by the letter stamped on the back of each tab.) (Figure D) Cut and remove mounting tabs “A” from Radio Housing #2 and the mounting brackets. (The tabs can be identified by the letter stamped on the back of each tab.) Locate the scored line on the back of the radio housing and break away the bottom portion of the housing as shown. (Figure C) D C "A" "A" "B" "A" "A" "A" "A" "B" "B" "A" Continue to kit assembly. 7 "B" "A" 99-1003 KIT ASSEMBLY DIN MOUNT RADIO *Note: Refer also to the instructions included with the aftermarket radio. A NOTE: For Sportage 1995-97 and 1998-03 secure the Mounting Brackets to the Radio Housing with (4) Captive Studs and (4) Pal Nuts. (Figure A) 1 Slide the DIN cage into the radio housing and secure by bending the metal locking tabs outward. (Figure B) 2 Slide the radio into the DIN cage/housing assembly until it snaps into place. (Figure C) Continue to final assembly. C B 8 99-1003 FINAL ASSEMBLY FINAL ASSEMBLY A (A) Strip wire ends back 1/2" B B) Twist ends together C) Solder D) Tape C D 1 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.) 2 Re-connect the negative battery terminal and test the unit for proper operation. 3 Reassemble radio and dash assemblies in reverse order of disassembly. FINAL WIRING CONNECTIONS Make wiring connections using the EIA color code chart shown below and the instructions included with the head unit. Metra recommends making connections as shown below; Strip, Splice, Solder, Tape. Isolate and individually tape off ends of any unused wires to prevent electrical short circuit. METRA / EIA WIRING CODE 12V Ignition / Acc. . . . . . . . . . Red Right Front (+) . . . . . . . . . . . . Gray 12V Batt / Memory. . . . . . . . . Yellow Right Front (-). . . . . . . . . . . . . Gray/ Black Ground. . . . . . . . . . . . . . . . . . Black* Left Front (+) . . . . . . . . . . . . . White Power Antenna. . . . . . . . . . . . Blue Left Front (-). . . . . . . . . . . . . . White / Black Amp Turn-On . . . . . . . . . . . . . Blue / White Right Rear (+) . . . . . . . . . . . . Violet Amp Ground. . . . . . . . . . . . . . Black / White Right Rear (-) . . . . . . . . . . . . . Violet / Black Illumination . . . . . . . . . . . . . . Orange Left Rear (+) . . . . . . . . . . . . . Green Dimmer . . . . . . . . . . . . . . . . . Orange / White Left Rear (-) . . . . . . . . . . . . . . Green / Black *NOTE: When a Black wire is not present, ground radio to vehicle chassis. All colors may not be present on all leads due to manufacturer’s specifications. 9 99-1003 INSTRUCTIONS 1-800-221-0932 www.metraonline.com Rev. 04/13/09 © COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION INST99-1003
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Create Date : 2009:04:13 09:18:41Z Creator Tool : QuarkXPress(tm) 6.5 Modify Date : 2009:04:13 09:22:16-04:00 Metadata Date : 2009:04:13 09:22:16-04:00 Producer : QuarkXPress(tm) 6.5 X Press Private : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%EndComments Format : application/pdf Document ID : uuid:1bebcb10-282e-11de-bd08-00039375a688 Instance ID : uuid:1bebd54c-282e-11de-bd08-00039375a688 Page Count : 12 Creator : QuarkXPress(tm) 6.5EXIF Metadata provided by EXIF.tools