Inteli Communication Guide 06 2008
User Manual:
Open the PDF directly: View PDF
Page Count: 107 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Table of Contents
- General Information
- Controllers Communication Capabilities
- Local Connection – RS232
- Local Connection – USB
- Remote Connection
- Modem Connection
- Internet Ethernet Connection
- Controllers
- Equipment
- Available software for IG/IS-NT
- GenConfig
- Available software for ID
- Available software for IL-NT
- Available software for IC-NT
- PC Software features (LiteEdit)
- PC Software features (GenConfig, InteliMonitor)
- PC Software features (DriveConfig, DriveMonitor)
- Connection speed
- Connection from PC
- One controller - RS232 connection
- Two controllers – CAN / Ethernet connection
- Max four PCs can be connected to one iG-IB at once
- Internet Dialup Connection
- Active Call
- Active SMS
- Active E-mail (SMS E-mail)
- SMS Message Control
- Terminal Connection
- Modbus Connection
- Modbus Protocol Description
- Introduction
- Data reading
- Data writing
- Check field calculation
- Data types
- Access to dedicated communication objects of the controller
- Communication Status
- Controller Address
- Communication Protocol
- Write Password Setting
- Write Password Change
- Write Password Changing Level 1
- Write Password Changing Level 2
- Write Password Changing Level 3
- User Identification Number
- Change User Alias
- Read Alias of One User
- Read Alias of All Users
- User Administration
- Access Attributes of All Users
- Access Attributes of One User
- Last Error of the Modbus Communication
- Current Time
- Current Date
- Action - Command
- Controller Serial Number
- Alarm List
- Remote Communication Access Code Setting
- Remote Communication Access Code Changing
- Active Call Termination
- Controller Identification String
- Values Multipack
- ECU Diagnostic Codes List
- How to Create Actual Communication Object List
- Register Oriented Modbus in IG/IS-NT/ID, IL-NT, IC-NT (not available for IG, IS)
- Modbus Communication Examples
- Battery Voltage Reading
- Binary Inputs Reading
- Alarm List Reading (only for IL-NT, IC-NT, ID, IG,IS – not for IG/IS-NT)
- Engine State Reading
- Setpoint Adjusting
- IG/IS-NT Register Oriented Modbus Communication Examples
- I-LB, IG-IB Communication Units
- Modem Recommendations
- Converters