Intermatic T8805p101c Manual

User Manual: Intermatic-t8805p101c-manual

Open the PDF directly: View PDF PDF.
Page Count: 1

DownloadIntermatic-t8805p101c-manual
Open PDF In BrowserView PDF
R (OPTIONAL)

http://waterheatertimer.org/How-to-wire-Intermatic-sprinkler-timers.html

MODEL: T8805P101C

158TS11854

LR3730

PROGRAM TIME SWITCH WITH
14-DAY "SKIPPER®" WHEEL

FOR UP TO 60 OPERATIONS PER DAY
SWITCH RATING: SINGLE POLE SINGLE THROW
15 AMP., 1/2 H.P.125 VOLTS A.C.

CLOCK MOTOR: 125 VOLTS - 60 HZ.

Note:

NOT FOR DIRECT PUMP CONTROL
TIME
POINTER

AUTO

DIAL
TIME
DAY

SKIPPER

1. ALL MARKINGS TO BE PER
INTERMATIC APPROVED
ARTWORK.

GROUND TO
LINE
(BLACK)
120 VOLT
POWER
COMMON
SUPPLY

SELECTOR
SWITCH

CLOCK

NEUTRAL
(WHITE)

FIGURE 1

TO
SOLENOID

WIRING DIAGRAM

PROGRAMMING INSTRUCTIONS:

+1/32

6 3/4

1. TO SET FIRST ZONE: For watering, push gold pin into slot on yellow
dial at desired ON time. For each 12 minutes of additional watering
add one pin WITHOUT skipping a slot.
2. TO CHANGE ZONES: Leave one blank slot on yellow dial after ON
line (gold pin), and valve will automatically advance to next zone.
3. TO SET ADDITIONAL ZONES: Repeat steps 1 and 2. REMEMBER
to leave blank space between zones
4. TO SET TIME OF DAY: Turn yellow dial CLOCKWISE, until correct
line is at end of silver time pointer. Do NOT turn silver pointer.
5. TO SKIP DAYS: Turn black skipper wheel COUNTER-CLOCKWISE
until todays day is in front of "14" arrow. Press pins DOWN on days
of NO watering. The skipper wheel must have all pins UP for daily
watering.
6. PUT SELECTOR SWITCH IN AUTO: This switch can be used to turn
the system ON or OFF for manual operation without affecting the set
program.
IMPORTANT NOTICE: Use the one silver pin that is located at Midnight
on the yellow dial, it advances the skipper wheel automatically. Do NOT
use multiple silver pins.
Follow The National Electrical Code and local code requirements when
installing this time switch.
CAUTION: Always disconnect power at main panel before servicing
this Switch or the equipment it controls.

INTERMATIC INCORPORATED
158TS11854

SPRING GROVE, ILLINOIS 60081-9698

D17

SEE B/M FOR ALL PART NUMBERS & QUANTITIES
ITEM

DR: SRB 8/24/2004
ORIG:
CHKD: GLM 8/24/2004
SCALE: FULL

APPROVED
1

RELEASED TO ELEC. DATA

LET
REVISION
DATE/BY
TOOL TOL: BOXED TOLERANCES ARE FOR LIFE-OF-TOOL DEVIATION ONLY.
DO NOT USE FOR RE-TOOLING.

T8805P101C
MODEL

PART NUMBER

DESCRIPTION

INTERMATIC INCORPORATED
NAME:

INST SHT - DOOR, T8805P101C - ENG

MATL:

WHITE PRESSURE SENSITIVE STOCK
BLACK PRINTING INK

GLM 8/24/2004

FINISH:

SUPERSEDES

HEAT TREAT

DIM TOL. : DECIMALS (UNLESS OTHERWISE SPECIFIED) - TWO PLACE (.00) + .015 - THREE PLACE (.000)+ .005
ANGLES + 30 MINUTES - ALL DIMENSIONS MUST BE MET BEFORE PLATING.

QTY
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : 3.1-701
About                           : uuid:2dd77302-f5ec-11d8-a5e8-000a958f4d04
Producer                        : QuarkXPress(tm) 6.1
X Press Private                 : %%DocumentProcessColors:.%%EndComments
Create Date                     : 2004:08:24 11:29:15Z
Creator Tool                    : QuarkXPress(tm) 6.1
Modify Date                     : 2006:10:18 11:22:19-05:00
Metadata Date                   : 2006:10:18 11:22:19-05:00
Document ID                     : uuid:2468f2c2-f5ec-11d8-a5e8-000a958f4d04
Instance ID                     : uuid:d3a99684-5ec4-11db-91e2-000a95a89824
Format                          : application/pdf
Page Count                      : 1
Creator                         : QuarkXPress(tm) 6.1
EXIF Metadata provided by EXIF.tools

Navigation menu