JBL 4410

User Manual: JBL 4410

Open the PDF directly: View PDF .
Page Count: 4

Download
Open PDF In Browser	View PDF

PROFESSIONAL

FEATURES:
Frequency Range f -6 dB): 35 Hz-27 kHz
Frequency Response

(f

2 dB): 45 Hz-20 kHz

Sensitivity: 91 dB SPL, 1 W (2.83 V), I m
Power Rating: 125 watts, pink noise
Transducer
250 mm
125 mm
25 mm

L

Complement:
(10 in) LF, Aquaplas laminate cone
(5 in) midrange cone
( 1 in) HF, pure titanium dome

JBL’snew 44 10 studio monitor consists of a threeway vertical array of transducers. The system is provided in mirror-imaged pairs in order to ensure
absolute accuracy of stereophonic imaging. The 44 10
is thus the logical choice for critical digital recording
applications where wide bandwidth, linear
response, and accurate imaging are essential.

SERIES

The 44 10 reflects the same design principles
which characterize all JBL monitors: smooth overall
response, controlled dispersion, and the ability to
produce high acoustical output with little stress.
Optimum enclosure porting and careful network
design ensure smooth response over a wide
bandwidth. Response to 27 kHz ensures that the
upper musical octave ( 10 kHz to 20 kHz) will be reproduced with utmost accuracy.

-+

HIGH FREQUENCY
DOME RADIATOR
Pure titanium was first used by JBL in the design of
diaphragms for high frequency compression drivers.
Recently, JBL has perfected a 25 mm titanium dome
radiator which is capable of 30 watts power handling
and can reproduce the frequency range from 3 kHz to
27 kHz. The unique “diamond surround” and ribbed
dome structure of the model 035Ti HF unit provide
control over secondary resonances, yielding absolutely flat axial response to the normal upper limits
of today’s recording media. With a basic sensitivity of
92 dB, one watt at one meter, the 035Ti transducer
exhibits virtually no dynamic compression.

MIDRANGE DRIVER
The 100 mm (5 in) midrange driver used in the
4410 has a 25 mm ( I in) diameter copper voice coil.
The cone is made of felted paper with a special
damping treatment applied to ensure smooth
response. The basic sensitivity of the midrange
transducer is 94 dB, one watt at one meter, and this
ensures that the device will exhibit negligible
dynamic compression, even at high drive levels.

DIVIDING NETWORK
The complex network design produces a seamless
system frequency response through the critical
crossover regions at 800 Hz and 4.5 kHz. The rolloff
slopes are precisely determined to result in smooth
axial and power response.
High quality polypropylene and polystyrene
capacitors are utilized as “bypass capacitors” in parallel with the larger network mylar capacitors. This
design procedure linearizes energy storage in the
larger capacitors, and the result is greater accuracy in
the reproduction of transient signals.
Front baffle controls allow precise adjustment of
mid and high frequency transducer levels, enabling
the system to be adjusted to taste, or to match a
given acoustical environment.

SPECIFICATIONS:
SYSTEM
Frequency
Frequency

Response

Power

Ratme’

Sensitivity:
Nominal
Crossover
LOW FREQUENCY

Impedance:
Frequency:

Diameter:
Voice

Magnetic

Assembly

Coil.

Weight:

Flux

Density:

Sensitivity?
MID

RANGE

Nominal

Diameter:

Assembly

Coil:

Weight:

Flux Density:
Sensitivity:
HIGH

FREQUENCY

DOME

Nominal

kHz

125 watts

I watt(2 83

91 dB SPL.

V) at

I meter

8 ohms
800 Hz, 4 5 kHz

250 mm
50 mm

(IO in)
(2 in) diameter

copper

2.7 kg (6 lb]
1.08 tesla

(10,800

gauss)

90 dB SPL, 2.83 Vat

I m (3 3 ft)

Diameter:

Assembly

125 mm
25 mm

(5 in)
(I in)

0 74 kg (1.63 lb)
1.25 tesla

(12,500

gauss)

94 dB SPL, 2.83 Vat

I m (3.3 ft)

RADIATOR:

Voice
Magnetic

kHz

DRIVER:

Voice
Magnetic

35 Hz-27
45 Hz-20

TRANSDUCER:

Nominal

LOW FREQUENCY DRIVER
The 250 mm ( 10 in) diameter LF driver has a felted
paper cone laminated with Aquaplas. This unique
combination of materials has been used by JBL for
many years as a means of achieving smooth
response in the upper range of low frequency
transducer operation. In the 44 10 system, the critical
crossover region around 800 Hz benefits from the
Aquaplas treatment, and the transition to the
midrange unit is made effortlessly.
Linearity of the LF driver is the result of careful
attention to mechanical suspensions as well as
Symmetrical Field Geometry (SFG). SFG reduces
harmonic distortion by producing identical magnetic
flux fields on each side of the magnetic gap. This ensures that the voice coil will intersect equal flux lines
for both positive and negative excursions of the
cone. A flux stabilizing ring placed around the pole
piece reduces the effects of magnetic flux field
modulation. Overall, SFG reduces distortion to
about one-tenth the value found in conventional
magnetic structures.
A cast aluminum frame ensures mechanical
integrity under the most demanding operating
conditions.

( -6 dB)
(2 2 dB)

Range

Coil:

Weight:

Flux Density
Sensitivity?:

25 mm

(I in)

25 mm

(I in) diameter

copper

0 91 kg (2 lb)
I .5 tesla

(I 5,000 gauss)

92 dB SPL. (2.83 V) at I m (3.3 ft)

GENERAL:
Finish:
Grille

donor.

Dlmenslons

oiled

walnut

dark blue
597 mm

x 362 mm x 286 mm

deep

(23% m x 14% m x I I % m deep)

Shlppmg

Weight

I9 kg (43 Ibs)

Weight

23 kg (50 Ibs)

‘Ratmg based on test signal of flltered random ncxse conformmg to mternatlonal standard IEC 268.
5 (pink norse with I2 dB/octave rolloff below 40 Hz and above 5000 Hz wth a peak-to-average rat,0
of6 dB) two hours duration
*Averaged from 100 Hz to 500 Hz wthm
‘Averaged above 3 kHz wthln

I dB

I dB

1 W at lm; impedance

Frequency

Response,

Directivity

(DI and Q) vs. Frequency

Horizontal Off-axis Response vs. Frequency
- I2 dB contours)

Beamwidth

( -6

dB) vs. Frequency

Phase Response vs. Frequency,
divisions at 45 degrees.

( - 3, - 6, - 9, and

Energy-Time Curve (time span, 0 to 18,304 microseconds;
vertical divisions 6 dB; loudspeaker placed one meter from
microphone) Note that the bulk of the loudspeaker’s energy
arrives at the microphone coherently.

Vertical Off-axis Response
- I2 dB contours)

200 Hz to 22 kHz; vertical

vs. Frequency

( - 3, - 6, - 9, and

Time-Energy-Frequency
(TEF) Curves (250 Hz to 20 kHz) Frontback span is from 8200 microseconds to 3053 microseconds;
vertical divisions 6 dB. Note the smooth decay of the system and
high frequency extension beyond 20 kHz.

Mid Frequency

Distortion

High Frequency

Control Range

vs. Frequency,

IO watts (distortion

Control Range

Power Compression,

raised 20 dB)

at 85,95,

and 105 dB, one meter

IBL contmually engages m research related to product wnprovement
New materlals productmn
methods and dwgn refmements are mtroduced mto exlstmg products wthout not~e as a routme
expression of that phkophy
For this reason any current IBL product may dtffer I” some respect
from I& pubhshed descnptmn but wll always equal or exceed the original design speclflcatmns
unless othervase stated

:
WI

JBL Professional, 8500 Balboa Boulevard,

P.O. Box 2200, Northridge,

California 91329 U.S.A.

66988

SS4410

P820

25M

4186



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Modify Date                     : 1998:12:10 14:28:56
Creator                         : Acrobat 3.0 Capture Plug-in
Producer                        : Photoshop PDF Plug-in 1.0
Create Date                     : 1998:12:10 14:24:53
Page Count                      : 4

EXIF Metadata provided by EXIF.tools