Joystick Manual

User Manual:

Open the PDF directly: View PDF PDF.
Page Count: 4

Step 1 :
Control using JoystickPiMecha
Go to “PiMecha” directory
Step 2 : Open “Joystick.py” file
Step 3 : Update the file path (marked in red) or use the test path
written to run the movements of PiMecha through the
stored/exported files.
Step 4 : Insert joystick USB dongle into Raspberry Pi USB port
Step 5 : Insert battery inside the joystick
Step 6 : Switch ON the Joystick
Step 7 : Run Joystick.py file & press the joystick buttons & see the
outputs like
1 - Key Pressed
2 - Key Pressed
.
.
.
.
.
.
.
.
.
Joytick key numbering are on next page...
Action Group Mode Instruction
Run Group ‘5th’
Action Command
Run Group ‘4th’
Action Command
Run Group Action Command ‘6th’Run Group Action Command ‘7th’
Run Group Action ‘0th’
Command
Open For
User Definition
Run Group ‘3rd’
Action Command
Run Group ‘8th’
Action Command
Run Group ‘1st’
Action Command
Run Group Action ‘2nd’
Command
Run Group ‘9th’
Action Command
Open For
User Definition
This is the action group.
For each key of Joystick there is a row defining the movements
key 0
key 1
key 2
key 3
key 4
key 5
key 6
key 7
key 8
key 9
For ex: when key 0 is pressed, action command 0 (i.e Row 0) is
executed

Navigation menu