Product Specification KCG50 KCG Brochure

Clean the stainless steel components using warm water with a mild detergent with a non abrasive cloth or sponge. Heavier

stains may require the use of a nylon scouring pad or a stainless steel cleaner. To remove paint or graffiti (or light concrete

splashes) use a cloth and alkaline or solvent paint strippers according to type of paint.

For Satin Finish Stainless try to follow the direction of the grain when cleaning vigorously or polishing. For Bead Blasted Finish

use a circular motion.

Rust spots or 'tea stains' can occur on the surface of the material, these are normally caused by contamination from ordinary

mild steel, particulary in areas where construction work has been undertaken.

Where contamination of the stainless has occurred from ordinary mild steel coming into contact with the stainless, use Rust

Remover 410. In cases where the surface is severely stained as a result of severe environmental conditions or scratched due