DVD MKAER USB2.0 Installation_Eng V1.0_ KWorld Maker VS USB2800D Installation Eng V1.0

User Manual: KWorld DVD Maker VS-USB2800D Installation Eng V1.0

Open the PDF directly: View PDF .
Page Count: 6

1

DVD MAKER USB2.0 Installation Manual

Contents

V1.0

Chapter 1 : DVD MAKER USB2.0 Hardware Installation ...............................................................................2

1.1 Package Contents .................................................................................................................................2

1.2 System Requirements...........................................................................................................................2

1.3 Hardware Installation...........................................................................................................................2

Chapter 2 : DVD MAKER USB2.0 Quick Installation .....................................................................................3

2.1 The Driver Installation of DVD MAKER USB2.0..............................................................................3

Chapter 3 : FAQ .................................................................................................................................................4

1.How to check if the driver has been installed successfully or not? ........................................................4

2.How to uninstall all of device driver and software utility?.....................................................................4

3.Why can’t my Audio system work under Vista operating system? How to make sure if the Sound

device is in <Turn On> mode?...................................................................................................................4

Note: For multi language installation manual, please install Adobe Acrobat Reader from autorun after

inserting the CD into the CD ROM. Click “Browse” and open Document file where multi language

installation manuals are in.

2

Chapter 1 : DVD MAKER USB2.0 Hardware Installation

1.1 Package Contents

Unpack your DVD MAKER USB2.0 package and make sure that all items are intact. The following items

should be included in your package:

-DVD MAKER USB2.0

-Quick Start Guide

-CD-ROM with driver, utilities and multi-language user manuals

-CD-ROM with Cyberlink PowerDirector 5 and PowerProducer 4 software

1.2 System Requirements

-Intel Pentium 4 2.0GHz or equivalent AMD Athlon

-256MB RAM of system memory or above

-1 available USB 2.0 port

-Graphics Card with 64 MB memory or above (Must Support DirectX 9.0)

-Sound Card (AC97 Compatible Sound Card)

-2GB Free HD Space

-CD-ROM Drive (For software installation)

-Microsoft Windows ® XP SP2 / Windows Vista

1.3 Hardware Installation

Please follow the steps shown below for installation of your DVD MAKER USB2.0 and follow the pictorial

guide below for peripheral connections.

1. Connect the AV/S-VIDEO input into the DVD MAKER USB2.0 connector.

2. Plug DVD MAKER USB2.0 Dongle into the USB 2.0 port of your system.

3

Chapter 2 : DVD MAKER USB2.0 Quick Installation

The DVD MAKER USB2.0 package comes with complete Windows software utilities. These utilities can be

found on the CD-ROM in this package. During installation, it is highly recommended to disable any

sub-programs. These include applications such as antivirus software and system monitoring applications.

1. When you finish the hardware setup, the “Found New

Hardware Wizard” window will pop up. Please click

“Cancel”and you can make use of DVD MAKER

USB2.0 Quick Installation for proper installation.

2. Insert the installation CD into the CD ROM device. The

autorun page will appear as the left image. Please choose

“Driver Installation”.

Note: Your USB device must plug in the USB port before

installation.

2.1 The Driver Installation of DVD MAKER USB2.0

3. Click “Start” to install the DVD MAKER USB2.0

driver. Please wait, while the installation is in process

4. Now the driver has been installed successfully on

your computer and click “OK” to finish driver

installation and go to next step.

4

Chapter 3 : FAQ

1.How to check if the driver has been installed successfully or not?

Ans :Right click on “My Computer” on the desktop and choose “Properties”. Once in “Properties”

window, click on “Device Manager” in Hardware panel. Click on the plus icon of “Sound, video and

game controllers” to open the device list. See Fig.1 below.

Fig.1

2.How to uninstall all of device driver and software utility?

Ans：Right click on “My Computer” on the desktop and choose “Properties”. Once in “Properties” window,

click on “Device Manager” in Hardware panel. Click on the plus icon of “Sound, video and game

controllers” then click right button to uninstall the device

Fig.2

3.Why can’t my Audio system work under Vista operating system? How to make sure if

the Sound device is in <Turn On> mode?

1. Click “Control Panel”, and choose “Sound” for setting

5

2. Click “Playback” = = => click “Speakers” = = => click “Properties” for

setting

3.Click “Levels”, and check if “Rear Blue

In” is in <Turn On> mode. If the setting is

‘’0’’the audio input can not output, please

adjust it to valid numbers

4. IF the option “Level” does not show up in “Playback”, please update Vista supported Audio card driver

5. Check if the ‘’Line Volume’’in Recording page is in<Turn On> mode,

please click’’Recording’’= = =>Click“Line Volume” = = => click

“Properties” for setting

6. Click “Levels”, and check if “Line Volume” is in <Turn On> mode. If

the setting is ‘’0’’the audio out put can not be heard , please adjust it to

valid numbers

6

7. When you open computer, please press "Del" to

BIOS. If your bios has below option "HD Audio

mode", please select to "Vista".