L011434 CPL KTR Bo Wex Standard 32 Series Spec Sheet
User Manual: L011434 - CPL-KTR - BoWex Standard 32 Series Spec Sheet
Open the PDF directly: View PDF 
.
Page Count: 3
FEATURES
DESCRIPTION
910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com
L011434
KTR BoWex® 32 Series
• High-Quality Sleeve Design
• Handles the Most Demanding Applications
• Max Torque of 2,380 in-lb.
• Allows for Different Bore Diameters
• No Backlash
• No Maintenance
• Requires Three Individual Part Numbers
• Easy Assembly
• Wide Variety of Sizes
DIMENSIONS
BoWex® curved-tooth gear couplings are exible shaft connections for a positive torque
transmission and specically suitable to compensate for axial, radial and angular shaft
misalignment. According to the well known effect of curved tooth gear couplings, any
edge pressure in the spline in case of angular and radial displacements is avoided so that
BoWex® couplings are the most free from wear during their operation.
*Note: For a complete coupling, two Hubs and a Sleeve must be selected.
Item M,N
in (mm)
E
in
(mm)
Outside
Diameter in (mm) LH
in (mm)
Length Thru
Bore
“l1, l2” in (mm)
Coupling
Length
“L” in (mm)
DHD
Size 32 0.30 (18) 0.16 (4) 1.57 (75) 0.98 (50) 1.46 (48) 0.91 (40) 1.97 (84)
KTR BoWex® 32 Series
Item
Bore
Diameter
(mm)
Keyway
(mm)
Outside
Diameter
(mm)
Length Thru
Bore
“I1 I2”
(mm)
Coupling
Length
“L”
(mm)
Material
KTR-BA010322001800 18 18 75 40 84 Sintered Steel
KTR-BA010322001900 19 19 75 40 84 Sintered Steel
KTR-BA010322002000 20 20 75 40 84 Sintered Steel
KTR-BA010322002200 22 22 75 40 84 Sintered Steel
KTR-BA010322002400 24 24 75 40 84 Sintered Steel
KTR-BA010322002500 25 25 75 40 84 Sintered Steel
KTR-BA010322002800 28 28 75 40 84 Sintered Steel
KTR-BA010322003000 30 30 75 40 84 Sintered Steel
KTR-BA010322003200 32 32 75 40 84 Sintered Steel
SPECIFICATIONS
910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com
Item Type/
Design Material Rated Power
(HP)
Max. Power
(HP)
Rated
Torque
(in-lb)
Max Torque
(in-lb)
Max. Speed
(rpm)
Mass Moment of
Inertia
(lb-in-sec^2)
KTR-010321000000 MPolyurethane 0.0084 0.0255 530 1,590 7,500 0.0010
KTR-010321000005 M...C Carbon Fiber
Polyurethane
0.0121 0.0375 790 2,380 7,500 0.0010
KTR-010321000020 AS Polyurethane 0.0084 0.0255 530 1,590 7,500 0.00243
Metric Bores
Sleeve
Item
Bore
Diameter
(in)
Keyway
(in)
Outside
Diameter
(in)
Length Thru
Bore
“l1, l2”
(in)
Coupling
Length
“L”
(in)
Material
KTR-BA010322071500 5/8 3/16 2.95 1.57 3.31 Sintered Steel
KTR-BA010322071911 3/4 No Key 2.95 1.57 3.31 Sintered Steel
KTR-BA010322071901 3/4 1/8 2.95 1.57 3.31 Sintered Steel
KTR-BA010322071900 3/4 3/16 2.95 1.57 3.31 Sintered Steel
KTR-BA010322072000 13/16 3/16 2.95 1.57 3.31 Sintered Steel
KTR-BA010322072211 7/8 No Key 2.95 1.57 3.31 Sintered Steel
KTR-BA010322072200 7/8 3/16 2.95 1.57 3.31 Sintered Steel
KTR-BA010322072202 7/8 1/4 2.95 1.57 3.31 Sintered Steel
KTR-BA010322072300 15/16 1/4 2.95 1.57 3.31 Sintered Steel
KTR-BA010322072500 11/4 2.95 1.57 3.31 Sintered Steel
KTR-BA010322072502 13/16 2.95 1.57 3.31 Sintered Steel
KTR-BA010322072600 1 1/16 1/4 2.95 1.57 3.31 Sintered Steel
KTR-BA010322072800 1 1/8 1/4 2.95 1.57 3.31 Sintered Steel
KTR-BA010322073000 1 1/16 1/4 2.95 1.57 3.31 Sintered Steel
KTR-BA010322073100 1 1/4 1/4 2.95 1.57 3.31 Sintered Steel
KTR-BA010322073102 1 1/4 5/16 2.95 1.57 3.31 Sintered Steel
Inch Bores
910 East Orangefair Ln. Anaheim, CA 92801 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com
Shaft Misalignment
Axial Misalignment Parallel Misalignment
Angular Misalignment Parallel and Angular Misalignment
Misalignments
BoWex® Size 32
Maximum Axial Misalignment ΔKa [in] ± 0.040
1500 RPM
Maximum Parallel Misalignment ΔKr [º] ± 0.014
Maximum Angular Misalignment ΔKw [º] ± 0.035
3000 RPM
Maximum Parallel Misalignment ΔKr [º] ± 0.009
Maximum Angular Misalignment ΔKw [º] ± 0.024
