LAP XM 2500 Installation Manual
User Manual:
Open the PDF directly: View PDF 
.
Page Count: 38
| Download | |
| Open PDF In Browser | View PDF |
SOFTWARE INSTALLATION MANUAL LAP-XM® 2.5.0.0 February 2011 M211134EN-A PUBLISHED BY Vaisala Oyj P.O. Box 26 FI-00421 Helsinki Finland Phone (int.): +358 9 8949 1 Fax: +358 9 8949 2227 Visit our Internet pages at http://www.vaisala.com/ FOR TECHNICAL INFORMATION Vaisala Inc., Wind Profiler Business Unit Phone (int.): +303 499 1701 PO Box 3659 Fax: +303 499 1767 Boulder, CO 80307-3659 USA Toll free (US) Wind Profiler Service: +1 877 824 7252 opt 2 © Vaisala 2011 No part of this manual may be reproduced in any form or by any means, electronic or mechanical (including photocopying), nor may its contents be communicated to a third party without prior written permission of the copyright holder. The contents are subject to change without prior notice. Please observe that this manual does not create any legally binding obligations for Vaisala towards the customer or end user. All legally binding commitments and agreements are included exclusively in the applicable supply contract or Conditions of Sale. N17728 _________________________________________________________________________________ Table of Contents CHAPTER 1 GENERAL INFORMATION .......................................................................... 5 About This Manual ................................................................. 5 Contents of This Manual...................................................... 5 Version Information ............................................................. 6 Related Manuals ................................................................. 6 Trademarks ............................................................................. 6 License Agreement ................................................................ 7 Warranty.................................................................................. 7 CHAPTER 2 LAP-XM® 2.5.0.0 SOFTWARE INSTALLATION .......................................... 9 Minimum System Requirements ........................................... 9 ® LAP-XM 2.5.0.0 Software .....................................................10 LAP-XM® 2.5.0.0 Software Reference and User Manuals....10 Windows Firewall Settings ...................................................11 LAP-XM® Configuration Files................................................11 CHAPTER 3 LAP-XM® WEB INTERFACE CONFIGURATION .......................................13 Microsoft Peer Web Services Install ....................................13 Microsoft Peer Web Services Directories and Access Permissions ...........................................................................14 Internet Explorer Configuration............................................15 CHAPTER 4 MONITOR INSTALLATION AND CONFIGURATION .................................17 ® MSDE and LAP Monitor Database 2.1 Install .....................17 SLIK ODBC View Install ........................................................17 Data Source Connection Configuration...............................18 Third Party Device Drivers....................................................19 CHAPTER 5 DATA DISPLAY SOFTWARE.....................................................................21 LAPMom Install......................................................................21 GraphXM Install (Optional) ...................................................21 CHAPTER 6 AUDIO CONFIGURATION AND SHORTCUTS ..........................................23 Windows Scheme Sounds Configuration............................23 Create Support Software Application Shortcuts.................24 VAISALA_________________________________________________________________________ 3 SOFTWARE INSTALLATION MANUAL__________________________________________________ CHAPTER 7 SERVICE SUPPORT.................................................................................. 25 Gathering Issue Details........................................................ 25 Contact Information.............................................................. 25 APPENDIX A LAP-XM® UPGRADE PROCEDURE.......................................................... 27 Uninstall Current Version of LAP-XM® ................................ 27 LAP-XM® 2.5.0.0 Software .................................................... 28 LAP-XM® 2.5.0.0 Software Reference and User Manuals... 29 Windows Firewall Settings .................................................. 29 Create Static IP Address ...................................................... 30 APPENDIX B SUPPORT SOFTWARE ............................................................................. 31 Simple Network Time Protocol Server (Optional) .............. 31 LAP-XM® GPS Service Configuration.................................. 32 LAP-XM® Manage Disk Space Service Configuration ........ 32 APPENDIX C LEGACY HARDWARE IDENTIFICATION AND INSTALLATION ............. 33 PIRAQ III Digital Processor Board Type Identification ...... 33 Bassband RASS Source Card Identification ...................... 33 DWD LAP®-16000 Pulse Shaper Hardware ......................... 34 APPENDIX D MGE UPS CONFIGURATION .................................................................... 35 Simple Network Management Protocol (SNMP) ................. 35 MGE UPS and SNMP IP Address Configuration................. 35 4 ____________________________________________________________________ M211134EN-A Chapter 1 _________________________________________________________ General Information CHAPTER 1 GENERAL INFORMATION This chapter provides basic information regarding the Vaisala LAP-XM® 2.5.0.0. Wind Profiler control and data acquisition software. About This Manual The manual assumes a thorough working knowledge of the Windows operating system on which the Vaisala LAP-XM® 2.5.0.0 software product. The Windows operating systems provide many user-configurable display and desktop options, therefore the descriptions used in this document may appear slightly different from what appears on your screen. The procedures nevertheless provide all the pertinent information needed to complete a full installation for the product. At the begining of each installation step there is a small underline placeholder. It is highly recommended that a pencil checkmark is made in this space after the completion of each step. This helps to ensure that each step is completed and in the correct order. Contents of This Manual This manual consists of the following chapters: - Chapter 1, General Information, provides basic information regarding the Vaisala LAP-XM® 2.5.0.0. Wind Profiler control and data acquisition software. - Chapter 2, LAP-XM® 2.5.0.0 Software Installation, describes the steps required to install and configure the LAP-XM® control and data acquisition software for a LAP® Wind Profiler. LAP-XM® requires that the Windows OS has two partions. One for the operating system and the other for data collection. - Chapter 3, LAP-XM® Web Interface, describes the steps required to install and configure the LAP-XM® web interface for controlling a LAP® Wind Profiler. VAISALA_________________________________________________________________________ 5 SOFTWARE INSTALLATION MANUAL__________________________________________________ - Chapter 4, Monitor Installation, provides installation and configuration for the a LAP® Wind Profiler system monitor database. This proceedure is required only for systems that will use a system Monitor. - Chapter 5, Data Display Software, provides installation and configuration for the a LAP® Wind Profiler data display software applications. - Chapter 6, Audio Configuration, describes configuration of the audio sound source for Radio Acoustic Sounding System (RASS). This proceedure is required only for systems that will use RASS. - Chapter 7, Service Support, provides service contact information and suggest information to be gather for Vaisala Inc. service personnel. - Appendix A, LAP-XM® Upgrade Procedure - Appendix B, Support Software - Appendix C, Legacy Hardware Identification and Installation - Appendix D, MGE UPS Configuration Version Information Table 1 Manual Code M211134EN-A Manual Revisions Description This manual,Software Installation Guide LAP-XM® 2.5.0.0 Related Manuals Table 2 Manual Code M211132EN-A M210303en-H M210301en-G M210440en-B M210442en-F M210444en-F Related Manuals Manual Name Windows XP Installation, Wind Profiler Workstation, DELL R5400 LAP-XM® Software Manual - Technical Reference ® Vaisala Wind Profiler LAP -3000 - User’s Guide Vaisala Wind Profiler LAP®-8000 - User’s Guide Vaisala Wind Profiler LAP®-12000 - User’s Guide Vaisala Wind Profiler LAP®-16000 - User’s Guide Trademarks LAP®-3000, LAP®-8000, LAP®-12000, LAP®-16000, and the LAP® logo are registered trademarks of Vaisala Inc. LAP-XM® is also a registered trademark of Vaisala Inc. It has been developed jointly with Sonoma Technology, Inc. and the Earth Systems Research Laboratory, Physical Sciences Division of the National Oceanic and Atmospheric Administration. 6 ____________________________________________________________________ M211134EN-A Chapter 1 _________________________________________________________ General Information Microsoft® and Windows® are registered trademarks of Microsoft Corporation in the United States and/or other countries. License Agreement All rights to any software are held by Vaisala or third parties. The customer is allowed to use the software only to the extent that is provided by the applicable supply contract or Software License Agreement. Warranty For certain products Vaisala normally gives a limited one year warranty, but warranty periods may vary according to the agreed upon terms of the sales contract. Please observe that any such warranty may not be valid in case of damage beyond normal wear and tear, negligent handling or installation, unauthorized modifications, or unauthorized removal or tearing of any LAP® component warranty label. Please see the applicable supply contract or conditions of sale for details of the warranty for each product. VAISALA_________________________________________________________________________ 7 SOFTWARE INSTALLATION MANUAL__________________________________________________ This page intentionally left blank. 8 ____________________________________________________________________ M211134EN-A Chapter 2 __________________________________________ LAP-XM® 2.5.0.0 Software Installation CHAPTER 2 LAP-XM® 2.5.0.0 SOFTWARE INSTALLATION This chapter describes the steps required to install and configure the LAP-XM® control and data acquisition software for a LAP® Wind Profiler. LAP-XM® requires that the Windows OS has two partions. One for the operating system and the other for data collection. Minimum System Requirements System requirements for this product are listed in Table 3 below. Table 3 Minimum System Requirements Component Processor Operating System (OS) Memory OS partition size Ethernet communications USB ports Accessory Drives Video Internet Browser Minimum Requirement Intel® Core 2: dual-core or quad-core (recommended), Pentium 4 (minimum) Windows XP Pro 1) 4 GB (recommended) 2 GB (minimum) 12 GB operating system partition 2) (minimum) 2x Gigabit Ethernet ports (minimum) required for digital IF receiver employing RVP910 2x 100 Megabit Ethernet ports (minimum) required for baseband (ISA) and PCI digital IF receiver employing PIRAQ-III 1x USB 2.0 port (minimum) required for all configurations 2x USB 2.0 ports (minimum) required for configurations with system monitor DVD-ROM Drive (minimum) DVD/RW (recommended) 3.5" Diskette Drive (recommended) SVGA 1024 x 768 (Minimum) SVGA 1280x1024 (Recommended) 3) Microsoft Internet Explorer 6.x or higher 1) Service Pack 3 2) Recommended HD size of 300 GB or greater. 3) LAP-XM® only supports Microsoft Internet Explorer. VAISALA_________________________________________________________________________ 9 SOFTWARE INSTALLATION MANUAL__________________________________________________ For a LAP® profiler using the PIRAQ-III PCI digital IF receiver, the computer system must provide at least four contiguous unused fulllength 32-bit PCI slots (with both +5.0 and +3.3 VDC present) for the signal processing boards. If the system has RASS, then an additional PCI-33 slot must also be available. For a LAP® profiler using a baseband conversion receiver using the DSP32C DSP, etc., the computer system must provide at least four contiguous unused full-length ISA slots for the signal processing boards. If the system has RASS,then an additional ISA slot must also be available. LAP-XM® 2.5.0.0 Software Note: 1.) For new system installs, refer to document Wind Profiler Workstation, Windows XP Installation – M211132EN before proceeding. 2.) To upgrade an existing LAP-XM system, refer to Appendix A. ___ a. Insert the “LAP-XM 2.5.0.0” Installation CD into CD-ROM drive. ___ b. From [ Start | Run ], browse the CD-ROM drive and double-click on the directory: \Lapxm 2.5.0.0 Install ___ c. Select the setup.exe installation program. ___ d. Click [Open] button to accept setup program. ___ e. Click [OK] button to start installation. Note: The JAVA VM and .NET Framework are both required by the LAP-XM software. The LAP-XM installer automatically detects if they are missing and starts installing them at this point. If they are already on the system the installer will jump to step g. ___ f. Click [Install] button to install Java SE 6 1.6.0_20 and Microsoft .NET Framework 2.0 SP2. ___ g. Click [Next>] button at the Welcome to the InstallShield Wizard for LAP-XM 2.5.0.0 dialog box. ___ h. Select the I accept the terms in the license agreement radio button. ___ i. Click [Next >] button. ___ j. Click [Install] button. ___ k. Click [Finish] button to complete installation. ___ l. Click [Yes] button to restart the Windows XP operating system. ___ m. Log into the workstation lapxmuser account – password lapxm. LAP-XM® 2.5.0.0 Software Reference and User Manuals ___ a. From [ Start | Run ], browse the CD-ROM drive and double-click on the directory: \LAP 2.5.0.0 Manuals 10 ___________________________________________________________________ M211134EN-A Chapter 2 __________________________________________ LAP-XM® 2.5.0.0 Software Installation ___ b. Highlight the LAP_2500_Manuals_Install.EXE installation program. ___ c. Click [Open] button to accept setup program. ___ d. Click [OK] button to start installation. ___ e. Click [Next>] button at the LAP-XM 2.5.0.0 Manuals Installation page. ___ f. Click [Next>] button to Start Installation. ___ g. Click [Next>] button to launch Adobe Reader installation program. Note: Click [Skip] button for systems that already have Adobe Reader installed. The installer will jump to step k. ___ h. Click [Next>] button at the Destination Folder dialog. ___ i. Click [Install] button at the Ready to Install the Program dialog. ___ j. Click [Finish] button at the Adobe Reader 9.1 Setup dialog. Note: If a restart dialog box appears, click the [No] button. ___ k. Click [Finish] button at the Vaisala LAP 2.5.0.0 Manuals dialog. ___ l. Go to [ Start | Programs | Adobe Reader 9 ] ___ m. Click [ Accept ] button. ___ n. Close Adobe Reader application. Windows Firewall Settings ___ a. Open Windows Firewall, [ Start | Settings | Control Panel | Windows Firewall ] ___ b. Select the Exceptions tab. ___ c. Click [ Add Program... ] button. ___ d. Click [ Browse... ] button and go to ther folder location: C:\Program Files\Crada\Lapxm\Bin ___ e. Highlight the Lapxm_main.exe program. ___ f. Click [ Open ] button on the Browse window. ___ g. Click [ OK ] button on the Add a program window. ___ h. Click [ OK ] buttton on the Windows Firewall window. LAP-XM® Configuration Files ___ a. Open Windows Explorer, [ Start | Programs | Accessories | Windows Explorer ] ___ b. Insert the Configuration File Diskette into drive A: ___ c. From drive A: copy the *.hdw file into C:\Program Files\Crada\LapXM\Config VAISALA________________________________________________________________________ 11 SOFTWARE INSTALLATION MANUAL__________________________________________________ ___ d. From drive A: copy the *.site file into C:\Program Files\Crada\LapXM\Config ___ e. From drive A: copy the Lapxm_BaseModules.cfg file into C:\Program Files\Crada\LapXM\Config ___ f. From drive A: copy all *.tpl file(s) into C:\Program Files\Crada\LapXM\Config\Templates ___ g. Close Windows Explorer. Important notes about configuration files created for versions of LAP-XM V2.4.0.0 and later. The Hardware files (._dw and .hdw file name extension) made for versions of LAP-XM previous to 2.4.0.0 may not be compatible with LAP-XM 2.5.0.0. These files contain information specific to the individual wind profiler and profiler safety limit values that should not be changed by the user. Before the LAP-XM upgrade is begun, the hardware files from the previous version should be sent to wp.support@vaisala.com for an update to the LAP-XM 2.5.0.0 configuration. Install the LAP-XM 2.5.0.0 compatible hardware files in the C:\Program Files\Crada\Lapxm\Config directory. There can be only one copy of each of the "._dw" and ".hdw" file name extensions in this directory. These files must be present in the C:\Program Files\Crada\Lapxm\Config directory for LAP-XM to operate. The Configuration files (.tpl and .cfg file name extension) used made for versions of LAP-XM previous to 2.4.0.0 not be compatible to LAP-XM 2.5.0.0 without modification. The user should refer to the chapter 3 of the LAP-XM Software Reference manual (Vaisala part number PN 80018301 rev L) and the example files "DwellMode Module Examples.txt"and "Process Module Examples.txt" in the C:\Program Files\Crada\Lapxm\Config\Examples directory for information about the format of the configuration files. Use WordPad or a similar application to modify any older configuration files. Older and modified configuration files are not compatible with the LAP-XM configuration file editor. A template file is provided with the LAP-XM distribution that is compatible with the LAP-XM configuration file editor. The BaseModules file from previous versions of LAP-XM is compatible with LAP-XM 2.5.0.0. If the previous version of LAP-XM did not use a "BaseModules.cfg", then use the file provided with the LAPXM distribution. The file must be placed in the C:\Program Files\Crada\Lapxm\Config directory. This file must be present in the C:\Program Files\Crada\Lapxm\Config directory for LAP-XM to operate. The Site file (.site file name extension) from previous versions of LAP-XM is compatible with LAP-XM 2.5.0.0. The file must be placed in the C:\Program Files\Crada\Lapxm\Config directory. There can be only one copy of the ".site" file name extension in this directory. This file must be present in the C:\Program Files\Crada\Lapxm\Config directory for LAP-XM to operate. 12 ___________________________________________________________________ M211134EN-A Chapter 3 __________________________________________ LAP-XM® Web Interface Configuration CHAPTER 3 LAP-XM® WEB INTERFACE CONFIGURATION This chapter describes the steps required to install and configure the LAP-XM® web interface for controlling a LAP® Wind Profiler. Microsoft Peer Web Services Install ___ a. Insert the Windows XP Installation CD into the CD-ROM drive. Note: Close the Windows XP Install dialog box if it appears after inserting the CD. ___ b. Go to [ Start | Setting | Control Panel | Add or Remove Programs ] ___ c. Click on Add/Remove Windows Components option in the left hand column. ___ d. In the components window, de-select the following options: MSN Explorer Outlook Express Windows Media Player Windows Messenger ___ e. In the components window, check and select the following option: Internet Information Services (IIS). ___ f. Click the [Details…] button. ___ g. Select the File Transfer Protocol (FTP) service option. ___ h. De-select the SMTP Service option. ___ i. Ensure the World Wide Web Service option is selected. ___ j. Click [OK] button. ___ k. Click [Next>] button. Note: If requested, Browse to E:\I386 to locate Windows XP Professional CD. ___ l. Click [Finish] button after IIS installation is complete. . ___ m. Close the Add/Remove Programs window. VAISALA________________________________________________________________________ 13 SOFTWARE INSTALLATION MANUAL__________________________________________________ Microsoft Peer Web Services Directories and Access Permissions ___ a. Go to [ Start | Settings | Control Panel | Administrative Tools | Internet Information Sevices ] ___ b. In the left panel, Click on the [+] before the(local computer) listed underneath the Internet Information Service entry. ___ c. Click on the [+] before the Web Sites folder. ___ d. Highlight Default Web Site entry. ___ e. Choose from the menu options [ Action | Properties ] ___ f. Select the Home Directory tab. ___ g. Select Low (IIS Process) at the Application Protection dropdown selection box. ___ h. Select Script and Executables at the Execution Permissions dropdown selection box. ___ i. Click the [Browse…] button to change the Local Path. ___ j. Choose the following path: C:\Program Files\Crada\LapXM\WebServer. ___ k. Click [OK] button. ___ l. Select Documents tab. ___ m. Remove all documents except Default.htm. ___ n. Click [OK] button to close the “Default Web Site Properties” dialog box. Note: If an Inheritance Override dialog box appears, click [OK] to proceed. ___ o. Click on the [+] before the entry Default Web Site . ___ p. Highlight Scripts entry. ___ q. Choose from the menu options [ Action | Properties ] ___ r. Ensure that the Read checkbox is selected. ___ s. Select the Directory Security tab ___ t. Click [Edit] button in Anonymous access and authentication control. ___ u. Click [Browse] button in Anonymous access. ___ v. Click the [Advanced] button on the Select User dialog box ___ w. Click on the [Find Now] button. ___ x. Highlight the Administrator account and press the [ OK ] button. ___ y. Click the [OK] button to close the Select User dialog box. ___ z. Deselect the checkbox for Allow IIS to control password. ___ aa. Enter the Administrators password - typically lapxm. ___ ab. Click [ OK ] button on the Authentication Methods dialog box. 14 ___________________________________________________________________ M211134EN-A Chapter 3 __________________________________________ LAP-XM® Web Interface Configuration ___ ac. Re-enter the Administrative password and click the [OK] button on the Confirm Password dialog. ___ ad. Click [ OK ] button on the Script Properties dialog box. ___ ae. Click on the [+] before the FTP Sites folder. ___ af. Highlight Default FTP Site ___ ag. Choose the menu option [ Action | Properties ] ___ ah. Select the Home Directory tab. ___ ai. Click [Browse…] button to change the Local Path. ___ aj. Choose the following path : D:\LapxmData. ___ ak. Click [OK] button at the Browse For Folder dialog box. ___ al. Ensure that the FTP Site Directory attributes are set as follows: [ x ] Read - Checked [ ] Write - Unchecked [ x ] Log Visits - Checked ___ am. Click [OK] button at the Default FTP Site Properties dialog box. ___ an. Highlight Default FTP Site. ___ ao. Choose the menu option [ Action | New | Virtual Directory… ] ___ ap. Click [Next>] button ___ aq. Type CRADA in the Alias text field. ___ ar. Click [Next>] button ___ as. Click [Browse…] button to choose the path for the new virtual directory. ___ at. Choose the following path: C:\Program Files\Crada. ___ au. Click [OK] button. ___ av. Click [Next>] button. ___ aw. Ensure the [ x ] Read checkbox is selected and the [ ] Write checkbox is deselected. ___ ax. Click [Next>] button. ___ ay. Click [Finish] button. ___ az. Close the Internet Service Manager window. Internet Explorer Configuration Note: Steps a through k only apply only to the first time Internet Explorer is used. ___ a. Open Internet Explorer, [ Start | Programs | Internet Explorer ] New Connection Wizard will appear the first time Internet Explorer is launched. ___ b. Select the radio button for Run the new Connection Wizard... ___ c. Click the [ OK ] button. VAISALA________________________________________________________________________ 15 SOFTWARE INSTALLATION MANUAL__________________________________________________ ___ d. Click the [Next...] button. ___ e. Select the radio button for Connect to the Internet. ___ f. Click the [Next>] button. ___ g. Select the radio button for Set up my connection manually. ___ h. Click the [Next>] button. ___ i. Select the radio button for Connect using a broadband connection that is always on. ___ j. Click the [Next>] button. ___ k. Click [Finish] button. ___ l. -----------------------------------------------------------Go to [ Start | Programs | Internet Explorer ] ___ m. In the Address text area type: http:// , the press [ Enter ] key on keyboard. Note: The LAP-XM 2.5.0.0. web interface should appear. If it does not, double check the steps listed in the preceeding section, Microsoft Peer Web Services Directories and Access Permissions. ___ n. Choose from the menu options [ Tools | Internet Options ] ___ o. Under the [General] tab in the Home Page area click on the [ Use Current ] Button. ___ p. Under Temporary Internet files press the [ Setting… ] button. ___ q. Select the radio button for Every visit to the Page. ___ r. Click [ OK ] button on settings dialog. ___ s. Select the [Advanced] tab. ___ t. Deselect the Enable folder view for FTP sites option under Settings/Browsing. ___ u. Click [ OK ] on the Internet Options dialog. ___ v. Close Internet Explorer. 16 ___________________________________________________________________ M211134EN-A Chapter 4 ___________________________________________ Monitor Installation and Configuration CHAPTER 4 MONITOR INSTALLATION AND CONFIGURATION This chapter provides installation and configuration for the a LAP® Wind Profiler system monitor database. This proceedure is required only for systems that will use a system Monitor. MSDE and LAP® Monitor Database 2.1 Install ___ a. Insert the LAP-XM V2.5.0.0 Installation CD into CD-ROM drive. ___ b. From [ Start | Run ], browse the CD-ROM drive and double-click on the directory: \LAP Monitor Database 2.1 ___ c. Select the MonitorDBSetup.EXE installation program. ___ d. Click the [Open] button. ___ e. Click [OK] button to launch the setup application. ___ f Click [ Next >] button to initiate the installation. ___ g. Ensure that both the MSDE and Monitor Database check boxes are selected. ___ h. Click [Next] button. ___ i. Click [Next] button to start the Microsoft SQL Server Desktop Engine installation. ___ j. Click [Finish] button to complete the installation. SLIK ODBC View Install ___ a. Insert the LAP-XM V2.5.0.0 Installation CD into CD-ROM drive. ___ b. From [ Start | Run ], browse the CD-ROM drive and double-click on the directory: x:\ SLIK ODBC View 3.1 ___ c. Select the SLIK_Setup.bat installation program. ___ d. Click [Open] button to accept the setup file. ___ e. Click [OK] button to launch the setup application. VAISALA________________________________________________________________________ 17 SOFTWARE INSTALLATION MANUAL__________________________________________________ ___ f. Click [Next>] button to initiate SLIK installation. ___ g. Select the I accept the terms in the license agreement option. ___ h. Click [Next>] button to continue. ___ i. Click [Next>] button to accept the default Destination Folder. ___ j. Click [Install] button to continue. ___ k. Deselect Launch the program and Show the read me file. ___ l. Click [Finish] button to continue. ___ m. Wait for Press any key to continue… prompt to appear then press the [Enter] key to close the Command Prompt window. Note: A text file containing typically used SQL commands can be found at: C:\Program Files\SLIK Software\ODBCView\ SQL Commands.txt Data Source Connection Configuration ___ a. Start the ODBC View program. ___ b. [ Start | Programs | SLIK Software | ODBC View ] ___ c. Click [DataSource…] button. ___ d. Select the Machine Data Source tab in the popup dialog box. ___ e. Click [New…] button. ___ f. Select the radio button labeled: System Data Source (Applies to this machine only) . ___ g. Click [Next>] button. ___ h. Select the SQL Server at the bottom of the scrolling text window. ___ i. Click [Next>] button. ___ j. Click [Finish] button. ___ k. In the Name field enter the text Monitor Database. ___ l. In the Server text field enter the network of the system. ___ m. Click [Next>] button. ___ n. Select the radio button labeled: With SQL Server authentication using a login ID and password entered by the user. ___ o. In the Login ID field enter the text LapxmSA ___ p. In the Password field enter the text j1f2m3a4m5j6j7a8s9o10n11d12. ___ q. Click [Next>] button. ___ r. Select the checkbox for Change the default database to: ___ s. Ensure that the Vaisala_Monitor is selected. 18 ___________________________________________________________________ M211134EN-A Chapter 4 ___________________________________________ Monitor Installation and Configuration ___ t. Click [Next>] button. ___ u. Click [Finish] button. (Make no changes in this dialog box). ___ v. Click [Test Data Source…] Note: If the connection is working correctly a dialog box will pop up stating "TESTS COMPLETED SUCCESSFULLY". ___ w. Click [OK] button to cancel information box. ___ x. Click [OK] button. ___ y. Click [OK] button ___ z. Enter the LapxmSA password to open a SLIK ODBC session with the Monitor Database. ___ aa. Click [OK] button. ___ ab. Exit the ODBC View Program. Third Party Device Drivers ® Third party device drivers are required for the LAP-XM monitor software to communicate with the hardware devices to be monitored. Two types of monitor communications exist for wind profiler systems. The earlier version uses RS485 and the later version uses DLP232. Drivers for the ® DLP232 are provided with LAP-XM 2.5.0.0 installation. The RS485 drivers are provided by the vendor of the USB to COM converter. These drivers must be installed the when the hardware is connected initially to the radar processor. Drivers required include DLP232 USB Serial Converter: Use the Windows manual driver install method to provide the specific location of the driver. The driver is located at: C:\Program Files\Crada\Lapxm\Bin\drivers\DLP232 RS485 USB-COMi-SI-M: Use the USB to Serial Driver and Utility provide on the vendor supplied CD to install the RS485 driver. VAISALA________________________________________________________________________ 19 SOFTWARE INSTALLATION MANUAL__________________________________________________ This page intentionally left blank. 20 ___________________________________________________________________ M211134EN-A Chapter 5 _______________________________________________________ Data Display Software CHAPTER 5 DATA DISPLAY SOFTWARE This chapter provides installation and configuration for the a LAP® Wind Profiler data display software applications. LAPMom Install ___ a. Insert the LAP-XM V2.5.0.0 Installation CD into CD-ROM drive. ___ b. From [ Start | Run ], browse the CD-ROM drive and double-click on the directory: x:\ LAPMom 1.0.8 ___ c. Select the LAPMom Setup.exe installation program. ___ d. Click [Open] button to accept the setup file. ___ e. Click [OK] button to launch the setup application. ___ f. Click [Next>] button to initiate LAPMom installation. ___ g. Ensure that the Anyone who uses this computer radio button is selected. ___ h. Click [Next>] button to continue. ___ i. Click [Next>] button to accept the Destination Folder. ___ j. Click [Next>] button to accept the application install. ___ k. Click [Finish] button to exit installation. GraphXM Install (Optional) ___ a. Insert the GraphXM Installation CD into CD-ROM drive. ___ b. From [ Start | Run ], browse the CD-ROM drive and select the root directory. ___ c. Select the GraphXM Setup installation program. ___ d. Click [Open] button to accept Setup. ___ e. Click [OK] button to start installation. ___ f. Click [Next>] button to start the installation program. ___ g. Insure that the Anyone who uses this computer radio button is selected. ___ h. Click [Next>] button to accept User Information. VAISALA________________________________________________________________________ 21 SOFTWARE INSTALLATION MANUAL__________________________________________________ ___ i. Click [Next>] button to accept the Destination Folder. ___ j. Click [Next>] button to accept the application install. Note: The GraphXM installation may require a system restart at this point. If not, proceed to step o. ___ k. Click [Yes] to proceed with restart. ___ l. Log in as Lapxmuser, GraphXM installation program will restart automatically. ___ m. Click [Next>] button at Welcome dialog box. ___ n. Click [Next>] button to resume GraphXM installation. ___ o. Click [Finish] button to complete installation. ___ p. Remove GraphXM installation CD-ROM. 22 ___________________________________________________________________ M211134EN-A Chapter 6 _____________________________________________ Audio Configuration and Shortcuts CHAPTER 6 AUDIO CONFIGURATION AND SHORTCUTS This chapter describes configuration of the audio sound source for Radio Acoustic Sounding System (RASS). This proceedure is required only for systems that will use RASS. Windows Scheme Sounds Configuration Note: For systems that do not have integrated sound interface, a SoundBlaster audio card must be installed before proceeding. Install the SoundBlaster software according to the instructions supplied with the audio card. ___ a. Go to [ Start | Settings | Control Panel | Sounds and Audio Devices ] ___ b. Select the Sounds tab. ___ c. Click the Sound schemes drop-down menu and select No Sounds. Note: If Windows asks Do you want to save previous Scheme? click the [No] button. ___ d. Click [ OK ] button. ___ e. Go to [ Start | Programs | Accessories | Entertainment | Volume Control ] ___ f. Ensure that a checkmark exists before the menu item [ Options | Advanced Controls ] This will expose the [Advanced] options button for the various volume controls. ___ g. Click the [Advanced] button at the bottom of the Master Volume Playback control column. Note: The [Advanced] option for this column is not always available. If it does not appear, skip to step l. ___ h. If a checkbox labeled 1 Spatial or SPDIF exists, ensure that checkbox for each one is deselected. ___ i. Click [Close] button. ___ j. Exit the Playback Control utility. VAISALA________________________________________________________________________ 23 SOFTWARE INSTALLATION MANUAL__________________________________________________ Create Support Software Application Shortcuts Create Desktop and Taskbar Quick Launch shortcuts for the following software applications. See Windows operating system help for details on creating application shortcuts. ___ a. LAPMom – found at C:\Program Files\LAPMom\LAPMom.exe ___ b. GraphXM – found at C:\Program Files\GraphXM\GraphXM.exe (If installed). ___ c. Services - Copy from [ Start | Settings | Control Panel | Administrative Tools ] ___ d. SLIK ODBC View 3.1 found at C:\Program Files\SLIK Software\ODBCView\ ODBCView.exe 24 ___________________________________________________________________ M211134EN-A Chapter 7 ____________________________________________________________ Service Support CHAPTER 7 SERVICE SUPPORT This chapter provides service contact information and suggest information to be gather for Vaisala Inc. service personnel. Gathering Issue Details When troubleshooting the product, write a problem report consisting of the following issues: - What failed? (What does not function and what does function.) - Where did it fail? (location / environment) - When did it fail? (date, time / periodically / randomly) - How many items failed? (only one defect / several failures in one unit) - What was connected to the product and to which connectors? - Input power source type, voltage and list of other items (lighting, heaters, motors etc.) that were connected to the same power output. - What was done when the failure was noticed? Contact Information For technical questions, contact the Vaisala technical support: E-mail us-technicalsupport@vaisala.com Toll free (US) Wind Profiler Service: +1 877 824 7252 opt 2 If the product needs repair, please follow the instructions below to speed up the process and to avoid extra costs to you. 1. Read the warranty information. 2. Gather detailed information regarding the failure or incident. 3. Contact Vaisala service support via e-mail or fax . 4. Proceed as instructed by Vaisala technical support. Request for RMA (Return Material Authorization) and shipping instructions for any equipment that is to be returned for servicing. VAISALA________________________________________________________________________ 25 SOFTWARE INSTALLATION MANUAL__________________________________________________ This page intentionally left blank. 26 ___________________________________________________________________ M211134EN-A Appendix A ________________________________________________ LAP-XM® Upgrade Procedure APPENDIX A LAP-XM® UPGRADE PROCEDURE Uninstall Current Version of LAP-XM® ___ a. Using the LAP-XM Console, stop data aquisition. ___ b. Make a backup copy of existing configuration file directory located at: C:\Program Files\Crada\Lapxm\Config to a new directory location – e.g. C:\temp\Config. ___ c. Open [ Start | Settings | Control Panel | Administrative Tools | Services ] ___ d. Highlight and right-click on the Lapxm_Main entry and select Stop from the menu. ___ e. Highlight and right-click on the World Wide Web Publishing entry and select Stop from the menu. If LAP Monitor is being used. ___ f. Highlight and right-click on the MSSQLSERVER entry and select Stop from the menu. Note: A warning dialog box may appear stating that other services will be stopped. Click [Yes] to proceed. If GPS time synchronization is being used. ___ g. Highlight and right-click on the Lapxm_GPS entry and select Stop from the menu. If software watchdog is being used. ___ h. Highlight and right-click on the Lapxm_Watchdog_Software entry and select Stop from the menu. ___ i. Close Services utility window. ___ j. Go to [ Start | Setting | Control Panel ] ___ k. Double-click on Add/Remove Programs icon. ___ l. Highlight the LAP-XM 2.x.x.x entry and press the Change/Remove button. Note: If multiple LAP-XM entries exist, select the latest major revision number first. Remove all instances of LAP-XM shown. ___ m. Complete all steps to remove LAP-XM from the computer. Note: If the requested to restart, select [ Yes ]. Once the system has restarted and you have logged back in as lapxmuser, return to the Add/Remove utility. ___ n. Highlight the LAP-XM 2.x.x.x Manuals entry and press the Change/Remove button. VAISALA________________________________________________________________________ 27 SOFTWARE INSTALLATION MANUAL__________________________________________________ Note: If multiple LAP-XM entries exist, select the latest major revision number first. Remove all instances of LAP-XM Manuals shown. ___ o. Complete all step to remove LAP-XM Manuals from the computer. ___ p. Close Add/Remove Programs utility window. ___ q. Close Control Panel. ___ r. Open Windows Explorer, [ Start | Programs | Accessories | Windows Explorer ] ___ s. Locate and highlight the directory C:\program files\crada. ___ t. Choose the menu options [ File | Delete ] to remove the old LAP-XM installation directory. Note: If an Access denied warning appears, delete all sub-directories in the tree individually. ___ u. Close Windows Explorer. LAP-XM® 2.5.0.0 Software Note: 1.) For new system installs, refer to document Wind Profiler Workstation, Windows XP Installation – M211132EN before proceeding. 2.) To upgrade an existing LAP-XM system, refer to Appendix A. ___ a. Insert the “LAP-XM 2.5.0.0” Installation CD into CD-ROM drive. ___ b. From [ Start | Run ], browse the CD-ROM drive and double-click on the directory: \Lapxm 2.5.0.0 Install ___ c. Select the setup.exe installation program. ___ d. Click [Open] button to accept setup program. ___ e. Click [OK] button to start installation. Note: The JAVA VM and .NET Framework are both required by the LAP-XM software. The LAP-XM installer automatically detects if they are missing and starts installing them at this point. If they are already on the system the installer will jump to step g. ___ f. Click [Install] button to install Java SE 6 1.6.0_20 and Microsoft .NET Framework 2.0 SP2. ___ g. Click [Next>] button at the Welcome to the InstallShield Wizard for LAP-XM 2.5.0.0 dialog box. ___ h. Select the I accept the terms in the license agreement radio button. ___ i. Click [Next >] button. ___ j. Click [Install] button. ___ k. Click [Finish] button to complete installation. ___ l. Click [Yes] button to restart the Windows XP operating system. ___ m. Log into the workstation lapxmuser account – password lapxm. 28 ___________________________________________________________________ M211134EN-A Appendix A ________________________________________________ LAP-XM® Upgrade Procedure LAP-XM® 2.5.0.0 Software Reference and User Manuals ___ a. From [ Start | Run ], browse the CD-ROM drive and double-click on the directory: \LAP 2.5.0.0 Manuals ___ b. Highlight the LAP_2500_Manuals_Install.EXE installation program. ___ c. Click [Open] button to accept setup program. ___ d. Click [OK] button to start installation. ___ e. Click [Next>] button at the LAP-XM 2.5.0.0 Manuals Installation page. ___ f. Click [Next>] button to Start Installation. ___ g. Click [Next>] button to launch Adobe Reader installation program. Note: Click [Skip] button for systems that already have Adobe Reader installed. The installer will jump to step k. ___ h. Click [Next>] button at the Destination Folder dialog. ___ i. Click [Install] button at the Ready to Install the Program dialog. ___ j. Click [Finish] button at the Adobe Reader 9.1 Setup dialog. Note: If a restart dialog box appears, click the [No] button. ___ k. Click [Finish] button at the Vaisala LAP 2.5.0.0 Manuals dialog. ___ l. Go to [ Start | Programs | Adobe Reader 9 ] ___ m. Click [ Accept ] button. ___ n. Close Adobe Reader application. Note: For upgrades that include RVP910 MII replacements the following procedures must also be accomplished. Windows Firewall Settings ___ a. Open Windows Firewall, [ Start | Settings | Control Panel | Windows Firewall ] ___ b. Select the Exceptions tab. ___ c. Click [ Add Program... ] button. ___ d. Click [ Browse... ] button and go to ther folder location: C:\Program Files\Crada\Lapxm\Bin ___ e. Highlight the Lapxm_main.exe program. ___ f. Click [ Open ] button on the Browse window. ___ g. Click [ OK ] button on the Add a program window. ___ h. Click [ OK ] buttton on the Windows Firewall window. VAISALA________________________________________________________________________ 29 SOFTWARE INSTALLATION MANUAL__________________________________________________ Create Static IP Address ___ a. Open Network Connections [ Start | Settings | Network Connections | Local Area Connection 2 ] ___ b. Highlight Internet Protocol (TCP/IP) from This connection uses the following items: list. ___ c. Press the [properties] button. ___ d. Select the Use the following IP address radio button. ___ e. Enter 10.0.1.12 into the IP Address entry field. ___ f. Enter 255.255.255.0 into the Subnet mask: entry field. ___ g. Press the [ OK ] button on the Internet Protocol (TCP/IP) properties window. ___ h. Press the [Close] button on the Local Area Connection 2 Status window. 30 ___________________________________________________________________ M211134EN-A Appendix B __________________________________________________________ Support Software APPENDIX B SUPPORT SOFTWARE Simple Network Time Protocol Server (Optional) This installation is optional and is intended to be used on systems that include the GPS option. Adding SNTP allows computers connected to this machine to synchronize their clocks, thus maintaining a stable time reference for a local area network. ___ a. Insert the LAP-XM 2.5.0.0 Installation CD into CD-ROM drive. ___ b. From [ Start | Run ], browse the CD-ROM drive and select the directory: x: \ NetTime ___ c. Select the NetTime-2b7.exe installation program. ___ d. Click [Open] button. ___ e. Click [OK] button. ___ f. Click [Yes] button to start installation. ___ g. Click [Next>] button. ___ h. Click [Next>] button to accept the default destination directory. ___ i. Click [Next>] button to accept adding NetTime to the start menu folder. ___ j. Click [Install] button to start installing the software. ___ k. Click [Install Service] button. ___ l. Click [Configure] to configure NetTime NTP server. ___ m. In the top entry under Host name or IP Address enter the IP address of this computer. ___ n. In the next column under Protocol" select "RFC868 (TCP). Port 37 is the correct default. ___ o. Select the Allow other computers to sync to this computer check box. ___ p. Select the Never warn check box. ___ q. Click [OK] button. ___ r. Click [Finish] button. VAISALA________________________________________________________________________ 31 SOFTWARE INSTALLATION MANUAL__________________________________________________ LAP-XM® GPS Service Configuration ___ a. Open [ Start | Settings | Control Panel | Administrative Tools | Services ] ___ b. Highlight and right-click on the Lapxm_GPS entry. ___ c. Choose Properties. ___ d. At the General tab, Startup type: Select: Automatic ___ e. Click [OK] button. ___ f. Choose from the menu options [ Action | Start ] ___ g. Exit the Services utility. LAP-XM® Manage Disk Space Service Configuration ___ a. Open [ Start | Settings | Control Panel | Administrative Tools | Services ] ___ b. Highlight and right-click on the Lapxm_ManageDisk entry. ___ c. Choose Properties. ___ d. At the General tab, Startup type: Select: Automatic ___ f. Choose from the menu options [ Action | Start ] ___ g. Exit the Services utility. 32 ___________________________________________________________________ M211134EN-A Appendix C ___________________________________Legacy Hardware Identification and Installation APPENDIX C LEGACY HARDWARE IDENTIFICATION AND INSTALLATION PIRAQ III Digital Processor Board Type Identification The digital IF PCI board can be identified by the single type SMA RF connector on the mounting bracket. The serial number is normally on the PC board near the mounting bracket. Write down this serial number value. Ignore the "PIRAQ III Rev x" message silk screened on the board. It does not correspond to the Vaisala version. If the digital IF board is marked with a Vaisala serial number less than 11500, then this is version – (dash). If the digital IF board is marked with a Vaisala serial number between 11500 and 12100, then this is version A. If the digital IF board is marked with a Vaisala serial number greater than 12100, then this is version B or later. ® For a LAP profiler using a digital IF conversion receiver, there must be at least four contiguous unused full-length 32-bit PCI slots (with both +5.0 and +3.3 VDC present) for the signal processing boards. If the system has RASS, then a PCI-33 slot must also be available. Bassband RASS Source Card Identification If the radar processor uses the baseband receiver with ISA DSP-32C and RASS, then one must determine the version of the RASS source board in the radar processor. If the RASS source output connector is a 15-pin type D (DA-15S), then it is an "old" type source. Check the RASS signal cable leading from the radar processor to the audio amplifier to confirm this. If the RASS source output connector is a RCA phono jack, then it is a "new" type source. Check the RASS signal cable leading from the radar processor to the audio amplifier to confirm this. VAISALA________________________________________________________________________ 33 SOFTWARE INSTALLATION MANUAL__________________________________________________ DWD LAP®-16000 Pulse Shaper Hardware ___ a. Insert the USB cable coming from the Pulse Shaper Unit into the Advantech 4000 computer. Windows will automatically detect the Pulse Shaper hardware. ___ b. When the Found New Hardware Wizard dialog window select “No, not this time” radio button. ___ c. Click [Next>] button. ___ d. Choose Install from a list or specific location (Advanced) radio button. ___ e. Click [Next>] button. ___ f. Select Don’t search. I will choose the driver to install. ___ g. Click [Next>] button. ___ h. Select Show All Devices in the Common hardware types: window. ___ i. Click [Next>] button. It may take a few minutes for the next dialog to appear. ___ j. Click [ Have Disk… ] button. ___ k. Browse to the file c:\program files\crada\lapxm\bin\Lapxm USB PulseShaper.inf. ___ l. Click [ Open ] button. ___ m. Click [OK] button ___ n. Highlight the Lapxm USB PulseShaper – EzLoader entry. ___ o. Click [Next>] button ___ p. Click [ Continue Anyway ] button at the Hardware Installation dialog. ___ q. Click [Finish] button 34 ___________________________________________________________________ M211134EN-A Appendix D ____________________________________________________ MGE UPS Configuration APPENDIX D MGE UPS CONFIGURATION Simple Network Management Protocol (SNMP) Insert the Windows XP System CD into the CD-ROM drive. Note: If Windows installation dialog box appears, close it before proceeding. ___ a. From [Start | Settings] click on Control Panel. ___ b. Double-click the Add/Remove Programs icon. ___ c. On the left side of the window, click Add/Remove Windows Components. ___ d. When the dialog box appears, select Management and Monitoring Tools. ___ e. Click the [Details] button. ___ f. Ensure that Simple Network Management Protocol is selected. ___ g. Click [OK] button. ___ h. Click [Next>] button. ___ i. If asked to locate a file, click [OK] then [Browse] and go to the E:\i386 directory on the Windows XP CD. ___ j. Click [ Finish ] button. ___ k. Close Add/Remove Programs. ___ l. Close the Control Panel. MGE UPS and SNMP IP Address Configuration The IP addresses for this example are as follows: 10.0.2.1 10.0.2.4 10.0.2.5 10.0.2.6 10.0.2.7 Radar # Vaisala radar processor Comm # Communications processor (If part of delivery) UPS # SNMP adapter in the MGE UPS Printer # Printer (If part of delivery) Config # Temporary IP number for configuration PC 1. Disable the 'cold-start' option in the UPS main chassis (before the SNMP card is installed). 1.1 Connect a DB9-M to the UPS serial port. 1.2 Connect the other end (DB9-F) to a Windows PC serial port. 1.3 Start the UPS driver program (usually named UPSDrv32.exe). VAISALA________________________________________________________________________ 35 SOFTWARE INSTALLATION MANUAL__________________________________________________ 1.4 Select the tab labeled "On/Off condition". 1.5 De-select the "Cold start" option, then click the "Save" button. 1.6 Click the "Quit" button. 1.7 Disconnect the serial cable from the UPS and Windows PC. 2. Verify that the radar computer has an Internet Protocol (IP) address configured for the Ethernet connection. 3. Before connecting the Ethernet connection on the UPS SNMP card, ping the radar computer, UPS, laptop (administration computer), and gateway IP addresses. Only the radar computer and the gateway should respond to pings. If the proposed IP address for the UPS SNMP card is already in use, another address must be allocated. 4. Once the IP address for the UPS SNMP card is verified as available for use, verify the configuration of the UPS SNMP card. 4.0 Plug the UPS SNMP card into the UPS main chassis. Note that it is designed for "hot" insertion. 4.1 Connect the serial cable that is provided with the UPS SNMP card. 4.1.1 The RJ-45 connector goes into the RJ-45 jack in the center of the UPS SNMP card. 4.1.2 The DB9-F connector goes to the Windows PC serial port. 4.2 Run the "HyperTerm" program on the Windows PC to connect to the UPS SNMP card. [ Start | Programs | Accessories | Communications | HyperTerminal ] 4.2.1 The serial parameters are 9600 bits per second, 8 data bits, 1 stop bit, no parity, no hardware handshake. 4.3 Connect to the MGE UPS SNMP card with the password "MGEUPS" (or possibly "lapxm") 4.4 Select the "1. Agent Configuration" option. 4.5 Verify that the SNMP/Web Agent Version is at least "CB" 4.6 Verify that the "IP Address" is set to 10.0.2.1 (Use customer specified IP address if provided) 4.7 Verify that the "Gateway Address" is set correctly, changing if necessary. 4.8 Verify that the "Network Mask" is set to 255.255.255.0 (Use customer specified IP address if provided) 4.9 Verify that the "Community Read/Write" is set to "public", changing if necessary. 4.10 Verify that the "BOOTP/DHCP Enabled" option is set to "Disabled", changing if necessary. 4.11 Change the sysContact, sysName, and/or sysLocation as desired. 4.12 Select the "0. Return to previous menu" option 4.13 Select the "3. Access Control Table" option. 4.14 Select the "1. Modify - Modify an entry of table" option to add the IP address of the radar computer and the maintenance computer (laptop) (if used). 4.14.1 For example: IP Address Community String Access [1] 10.0.2.1 public Read/Write [2] 10.0.2.4 public Read/Write 4.15 Select the "0. Return to previous menu" option. 4.16 Select the "6. Reset Agent" option. 4.16.1 Note that the UPS SNMP card will not use a newly configured IP address until the card is reset by this option or the reset switch on the card. 4.17 Verify that the radar computer can connect to the UPS SNMP web page using Internet Explorer and the IP address from 4.6. 5. Set up LAPXM in the radar computer to communicate with the UPS SNMP card. 5.1 Edit the "C:\Program Files\CRADA\LapXM\Config\Lapxm_BaseModules.cfg" file. 5.2 Verify that the "Monitor_HwInterface_Ups_Snmp section contains an option like the following (changing the IP address as appropriate): // IP address of the UPS SNMP card sIpAddress = "10.0.2.5"; 5.3 Close any "Internet Explorer" or other web browsers that may be accessing LAPXM. 5.4 Stop, then restart the "LAPXM" service. 5.5 (Re)Start the web browser and connect to the LAPXM web page. 5.6 Verify that the lower left-hand window does not show any messages about failure to connect to the UPS. 5.7 Load a radar configuration and start it. 36 ___________________________________________________________________ M211134EN-A _____________________________________________________________ MGE UPS Configuration VAISALA________________________________________________________________________ 37 www.vaisala.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Format : application/pdf Creator : jwn Title : Microsoft Word - LAP-XM 2500 Installation Manual.doc Create Date : 2011:02:16 14:04:56-07:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2011:02:16 14:04:56-07:00 Producer : Acrobat Distiller 8.1.0 (Windows) Document ID : uuid:433c10ca-80fd-4870-a90a-843d4c486b34 Instance ID : uuid:3df5c1e3-2166-4384-a00c-68f8b0e80936 Page Count : 38 Author : jwnEXIF Metadata provided by EXIF.tools