LIFE 9000_9100_9200 User Manualrev5 6 9000 9100 9200

User Manual: LIFE 9000_9100_9200-User-manualrev5-6

Open the PDF directly: View PDF PDF.
Page Count: 46

Safety Guide
Parts Guide
Name & Function of Ionizer
Careful Notice of Installation
Conversion from 9100 to 9200
Installation Instructions
Installation Guide
Installation of the Pre-lter
Internal Filter Replacement
LCD Display/Touch Sensor
LCD Functions
Special Features
Operation Method
Amperage/Volume Adjustments/Filter Reset
Operation Warnings/Error Messages
Filters
Explanation of Ionized Water
Alkaline and Acidic Water Usage Guide
Uses of Ionized Alkaline/Acidic Water
Performance Features
Common Problems and Solutions
Acidic Cleaning Instructions
& Routine Maintenance
Frequently Asked Questions
4-8
9
10-11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27-29
30
31-32
33
34-45
Table of Contents
www.LifeIonizers.com/Support
4
Safety Guide - Read Completely
Before installation or operation of the LIFE Ionizer®, read this
instruction manual completely.
Note- Some parts may have been altered to improve product quality,
function or ease of use.
Symbols
Indications
Refer to the following key symbols and indicators throughout the manual.
Improper use may cause bodily injury
Improper use may cause structural damage to the unit
or physical injury
Caution, warning, danger symbol
Information on prohibited functions and uses
Make note of important information
Do not open as it may cause electric shock or other injury
Disconnect power plug in case of malfunction
75
9000/9100/9200
As with most electrical appliances, electrical parts in
this ionizer are electrically live even when switch is o.
www.LifeIonizers.com/Support 5
Improper use may cause bodily injury.
When drinking Ionized Alkaline Water - Do not take
prescription or other medications for approximately one
hour before and after drinking water.
This machine should not be repaired or otherwise
disassembled by any unauthorized person as it
may cause electrical re or shock, and will void the
manufacturer’s warranty.
Do not place the machine in humid areas such as
bathrooms. Do not clean this machine by spraying
the ionizer with water as it may cause electrical
shock.
75
9000/9100/9200
As with most electrical appliances, electrical parts in this
ionizer are electrically live even when the switch is o.
www.LifeIonizers.com/Support
6
Power cord should not be touched with wet hands.
Power cord should be plugged directly into an electrical
outlet.
Do not connect multiple appliances into a single power
receptacle.
Dusty or dirty electrical outlets may cause safety issues.
Bending, twisting, pulling or putting heavy objects onto
the power cord may cause electrical problems including
re.
If power cord, plug, or electrical outlet are damaged,
discontinue use immediately.
If the ionizer machine falls into water-
1. Unplug power cord from electrical outlet
2. Wipe the machine down and place in shaded area
3. Contact your LIFE IonizerTM dealer
Use only (110v) in the U.S.A. and Mexico. Use (100v) in
Japan. Most other countries require (220v). The power
cord cannot be altered from manufacturer’s specs.
Do not crimp or staple the power cord as it could cause
electrical shock.
75
9000/9100/9200
As with most electrical appliances, electrical parts in this
ionizer are electrically live even when the switch is o.
www.LifeIonizers.com/Support 7
Improper use may cause bodily injury.
Place machine in an upright position only.
Do not install this unit in direct sunlight or near a
heater, replace or other heat source.
Do not use water with a temperature of over 95
degrees Fahrenheit or 35 degrees Celcius.
If wall mounted, secure rmly and correctly.
75
9000/9100/9200
Improper use may cause structural damage to
the unit or physical injury
If not used for several days, run water through the
unit for 1 to 3 minutes before starting.
Store Ionized Alkaline Water in an air-tight glass
container and refrigerate for up to 2 days.
If inexperienced with drinking Ionized Alkaline
Water, users are encouraged to start with level 1.
DO NOT DRINK ACIDIC WATER.
Do not store Alkaline or Acidic water in metal
containers, although you can put alkaline water in
the Water for LIFE stainless steel bottles as they are
designed to maintain pH and ORP.
Aluminum and brass containers will be tarnished by
Alkaline and acidic water.
Improper use may cause structural damage to the unit
or physical injury.
Do not block the unit vent as it can cause overheating
and/or electrical problems.
Do not use benzene, thinner, or chemicals to clean the
unit as it can damage the housing.
Do not block the water passage or tubing.
If the machine will not be used for several days...
1. Unplug the power cord from the electrical outlet
2. Turn o the water valve to avoid leaking
3. Remove lters, drain and place in refrigerator in
plastic bags.
When handling the pH test (reagent drops)
1. Keep away from eye area. If eyes become irritated,
ush thoroughly and consult a doctor.
2. If accidentally swallowed, drink water and consult a
doctor.
3. Store in an airtight container away from the reach of
children.
4. Drops are ammable. Keep away from children.
www.LifeIonizers.com/Support
8
75
9000/9100/9200
1. Refer to the diagrams on the following pages before
beginning installation.
2. Be aware that a 110v outlet (USA) or 220v outlet is required.
3. If after installation the water has an odor, you may need to
install a pre-lter. Please consult your LIFE Ionizer® dealer.
4. How to use reagent drops: (BTB Chemical). Put 2-3 drops in
approximately 1 ounce of water to be tested. Compare color
to color chart provided in kit to determine pH level.
Parts Guide
www.LifeIonizers.com/Support 975
9000/9100/9200
Reagent Drops
(pH Test Drops)
Alkaline water
outlet hose
(exible)
Tubing Hose
User Manual
BTB Chemical
Power Cord
Counter top
Diverter Valve
Faucet (for
9200 model)
Name & Function of Unit
1. Front View
2. Internal Filters
(1) Main Body
(3) LCD Screen
(2) Water Outlet (4) Selection/Function
Touch Control
(5) Sliding Door
(6) First Filter (7) Second Filter
www.LifeIonizers.com/Support
10
75
9000/9100/9200
3. Bottom View
(1) Main Body (case): Outer shell of the system.
(2) Water Outlet: Dispenses alkaline/acidic water.
(3) LCD Screen: All the functions of the system are displayed on
the LCD screen.
(4) Selection/Function Touch Control: Touch controls to select the level
of alkaline/acidic or puried water.
(5) Sliding Door: Provides access to change lters.
(6) 1st Filter: Filters contaminants from the tap water inlet valve.
(7) 2nd Filter: Filters additional sediments from the water after passing
through the 1st lter.
(8) Water Inlet: Water inlet from the tap water diverter or water manifold
to the unit.
(9) Drain Outlet: This is to drain the acidic/alkaline water while the water
is ionizing.
(10) Power Cord: To provide electric power.
(11) Power Switch: ON/OFF switch for main power supply.
(10) Power Cord
(11) Power Switch
(8) Water Inlet (9) Drain Outlet
www.LifeIonizers.com/Support 11 75
9000/9100/9200
Special Installation Notes
The unit should be
placed on a level surface
where there is no danger
of sliding.
Do not put the unit on
top of the drain outlet
hose so that the hose will
not be bent or pressed.
The unit should be
installed within 40
inches of the drain.
Drain water hose
should be installed
lower than the ionizer.
The machine should
be installed away
from direct sunlight or
heaters such as a re
place or oil source.
• Before installation, check the unit’s voltage setting. This unit is only for
use with 110V/220V.
• The unit should be installed away from direct sunlight or cold areas, as
it may cause damage to the unit.
• Be sure to shut o water supply from the tap when not in use. The
ionizer should be connected to cool water. (Never connect to hot
water.)
• Do not install the unit near a heater or other heat source.
• Do not make any modications to the internal or external parts of the
machine.
www.LifeIonizers.com/Support
12
75
9000/9100/9200
www.LifeIonizers.com/Support 13 75
9000/9100/9200
Conversion from 9100 to 9200
1. Snap in plastic adaptor into top of unit where exible metal hose was in place.
2. Cut a piece of 1/4 inch tubing and connect it to plastic adaptor on top of unit,
then insert other end of tubing into the alkaline tubing connection on faucet.
3. Connect a piece of 1/4 inch tubing from
“outlet” on bottom of ionizer, to the
acid connection on faucet.
4. Plug in electrical extension wire into faucet connection
and plug in the other end into the back of the ionizer.
5. Press power button on top of faucet to turn on ionizer.
Power button
1. Inlet Valve
2. Outlet Valve
3. Power Plug
4. Fuse Box
5. On/O Power Switch
10"
5 ½"
Required
diameter of
faucet hole
is 1 ¼".
www.LifeIonizers.com/Support
14
Installation Instructions for LIFE 9000 Series
Use Cold Water Only With Your Ionizer
STEP 1: Unscrew the existing aerator from your faucet.
STEP 2: Use teon plumbers tape on the threads. Screw the LIFE IonizerTM diverter
valve onto your faucet. Three dierent sized adaptors are included for non-standard
sized faucets.
STEP 3: Unscrew the round nut from the side of the diverter valve. Slide the nut
over the end of the 1/4” tubing and then screw the nut back onto the diverter valve.
Tubing should now t snugly onto the diverter valve.
STEP 4: Lay the ionizer down on its back and you will see two white elbows extrud-
ing from the bottom of the machine. Depress the collar towards the elbow and
extract the plug from the end of the elbow. It is sometimes helpful to use the back
of a butter knife or screw driver to remove the plug. If you ever need to remove the
tubing from the quick release, you will use the same process.
STEP 5: Run tubing from the diverter valve to the inlet valve on the bottom of the
ionizer. Be sure to push the tubing into the quick connect valve 3/4” until it is rmly
seated.
If using a pre-lter, see page 16 for pre-lter installation.
STEP 6: Insert one end of tubing into outlet valve on bottom of unit and run the
other end into the sink securing it with the suction cup provided. Some units may
contain water. Don’t be alarmed; we test units for quality before shipment!
75
9000/9100/9200
plug
collar (ring)
elbow
Example
www.LifeIonizers.com/Support 15
Installation Instructions for LIFE 9000 Series
C
o
ld
w
a
t
e
r
in
le
t
C
o
ld
w
a
t
e
r
i
n
l
e
t
Assembly method of valve for
wall-mounted water taps
Fix adapter
Quarter turn
for Tap Water
Running
Water
Rubber Gasket
Remove the aerator from the water tap.
Assembly method of valve for Deck-sink water taps
Screw in the adaptor
Remove the aerator from
the water tap.
Connect by rotation
after insertion of rubber
packing
Installation Guide
Cold Water inlet
Assembly method of valve for Deck sink water taps
Assembly method of valve for
wall-mounted water taps
Quarter turn
for Tap Water
Running
Water
Cold Water inlet
Rubber Gasket
Fix adapter
Inlet Valve
Outlet Valve
(Drainage)
75
9000/9100/9200
www.LifeIonizers.com/Support
16
1. Cut the tubing leading to the ionizer at the desired location and length.
2. The cap on top of the lter housing is marked “OUT” and “IN”.
3. The tubing coming from the cold water connector needs to be inserted into the
side of the housing marked “IN”. Firmly press the tubing into the lter-housing cap.
You will feel the tubing stop when it is fully inserted. Pull on the tubing gently to
ensure that it does not come out and a good connection was made. If possible,
ush the lter by turning on the ow of water slowly and point the “OUT” towards
the sink; let it run for 2-3 minutes and turn the water ow o.
4. Insert the tube going to the ionizer into the side of the housing marked “OUT” by
rmly pressing the tube into the lter housing cap.
5. To remove the tubing from the lter cap, press in on the O-ring and tubing simul-
taneously, then gently pull out on the tubing.
TOP VIEW OF FILTER HOUSING
SIDE VIEW OF FILTER HOUSING
Installation of the Pre-Filter
75
9000
75
9000/9100/9200
www.LifeIonizers.com/Support 17 75
9000/9100/9200
Internal Filter Replacement
► LCD Screen Filter Display
1st lter: The 1st lter life is indicated on the left
side of the LCD screen. The lights will decrease as
the lter life diminishes. When the lter life has 100
liters remaining, there will be a voice message to
exchange the lter. The unit will not work when the
lter life is fully used.
► How to Change the Filters
→ Slide the front from left to right side to open up.
→ Select the lter to be changed and turn left to release it out of the socket.
→ Be sure to take the sticker o of the new lter.
→ Turn the lter into the lter socket clockwise to lock.
→ Slide the front closed and then touch the Waking/Stand By control.
→ The system will automatically ush itself and then is ready to use.
1st lter 2nd lter The sticker on the lter
must be removed.
2nd lter: The 2nd lter life is indicated on the right side of the LCD screen. The
lights will decrease as the lter life diminishes. When the lter life has 100 liters
remaining, there will be a voice message to exchange the lter. The unit will not
work when the lter life is fully used.
→ Life of 1st lter: about 4,000 liters (about 4,226 quarts)
→ Life of 2nd lter: about 8,000 liters (about 8,453 quarts)
For installation video, go to www.lifeionizers.com/support
and click 7700/9000/9100 lter replacement video.
www.LifeIonizers.com/Support
18
LCD Display
75
9000/9100/9200
1. 1st lter life indicator
2. Wash lamp indicator
3. Mode display indicator
4. Water pH indicator
5. Voice set display lamp
6. Flow meter display
7. Operation display lamp
8. 2nd lter life indicator
9. Alkaline/Acid water level
10. Alkaline water selection lamp
11. Acid water selection lamp
12. Puried water selection lamp
13. Error display lamp
1. Touch to turn the unit on.
2. Touch to get alkaline water.
3. Touch to get acidic water.
4. Touch to get puried water.
5. Touch to enter the conguration mode (see pg 22).
6. Touch to exit mode menu.
7. Touch to manually ush the unit.
1
2
3
4
5
6
7 8 9
10
11
12
13
Touch Control Panel Functions
ALKALI
ACIDIC
WAKING/
STAND BY
PURIFY
WASHING
SET
UP MODE
2
3
6
14
7
5
www.LifeIonizers.com/Support 19 75
9000/9100/9200
LCD Functions
• Alkaline water selection lamp: The Alkali lamp is ON when
alkaline water is selected.
• Acid water selection lamp: The Acidic lamp is ON when acidic
water is selected.
• Purify water selection lamp: The Purify lamp is ON when purify
water is selected.
• Outlet water pH value: It shows the pH value of the outlet water.
• Flow meter display: This displays inlet water ow in liters per
minute.
• Wash lamp indicator: Lights up when washing function is
selected and during automatic ushing.
• 1st lter life indicator: Shows how much life is remaining for the
1st lter.
• 2nd lter life indicator: Shows how much life is remaining for
the 2nd lter.
• Alkaline/Acid water level: Displays what level of alkaline/acid
water is being dispensed.
• Error display lamp: Displays error codes when the unit
malfunctions.
• Voice set display lamp: Displays the volume level for the voice
control.
www.LifeIonizers.com/Support
20
75
9000/9100/9200
1. One-touch ON/OFF and function selection.
2. 9 Platinum coated titanium electrode plates (patented).
3. 9 levels of water - four (4) alkaline, four (4) acidic, one (1) puried.
4. Large multi-color LCD screen.
5. PH value (acid and alkaline concentration) is displayed on the LCD
screen.
6. PH of the water is displayed on screen using 7 dierent colors (red is
most acidic and purple is most alkaline).
7. System is self-diagnosing and displays errors on the LCD screen.
8. Dual internal high capacity lters.
9. LCD screen displays remaining lter life for both lters.
10. Voice message prompts for each function.
11. Amount of water dispensed is displayed by per liter minute
12. SMPS power supply.
13. Automatic ow control system ensures proper pH levels.
14. Automatic self cleaning cycle runs to ensure safety and eciency of
the unit.
15. While dispensing water in puried mode, the system will shut o the
waste water outlet, to prevent unnecessary waste.
16. Convenient front sliding door for easy lter access (patented).
Specic Features
www.LifeIonizers.com/Support 21 75
9000/9100/9200
1. Touch the main operation control on the front of the unit.
•WhenthepoweredONforrsttime,theunitwillushitself
automatically. The “Washing” LED will blink.
•Oncethesystemisushed,itwillbeinstandbymode,selectthetype
of water desired on the touch control panel.
2. When “Alkali” is selected, the blue “Alkali” LED will light up. Alkaline
water comes out and the voice prompt announces which level of
alkaline water is being dispensed.
•Repeatedlytouchthe“Alkali”touchcontroltocyclethroughthe
available levels of alkaline water.
•Thesystemrememberswhichlevelofalkalinewaterwasselectedand
will dispense that level of alkaline water until a new level is chosen.
•However,iflevel4ischosen,foryoursafetythesystemwillrevertto
level 2 at next use.
3. When “Acidic” is selected, the yellow “Acidic” LED will light. Acidic water
comes out and there is a voice message announcing the level of acidic
water.
•Repeatedlytouchthe“Acidic”touchcontroltocyclethroughthe
available levels of Acidic water.
•Afterdispensingacidicwater,theunitswitchesbacktoalkalinewater
automatically for your safety.
4. When “Purify” is selected, puried water will be dispensed. The green
“Purify” LED will light up.
5. When “Washing” is selected, the red “Washing” LED will display for 30
seconds.
After the wash cycle is complete, the unit will return to standby mode.
•Whilewashingthesystemtherewillbeavoiceprompt:“Don’tdrink
water!”
•Usethe“Washing”functionwhenyouneedtocleantheelectro-
lytic cell.
•Thesystemwillreverttothealkalinewatersettingaftercleaning.
Operating Instructions
www.LifeIonizers.com/Support
22
75
9000/9100/9200
Amperage/Volume Adjustments/Filter Reset
MACHINE AMPERAGE (PH LEVEL) ADJUSTMENT
(Do this to adjust the pH level of water dispensed by the unit.)
• Ensure machine is plugged in.
• Hold down the "Mode" button for 10 seconds until the mode option
appears on screen. Then release "Mode" button.
• Scoll through menu by pressing "Mode" until the Alkali symbol
appears and ashes.
• Press the "Alkali" symbol to select which Alkali level you wish to adjust.
• Once you have selected the Alkali level, press the "Purify+"
symbol to increase amperage or the "Washing-" symbol to decrease
amperage (Note: Do not make adjustments in "Purify" Mode).
• Once you have completed adjusting your amperage press
"Set up" to save your settings.
VOLUME ADJUSTMENT
• Ensure machine is plugged in.
• Hold down the "Mode" button for 10 seconds until the mode option
appears on screen. Then release Mode button.
• The rst selection on the menu is the volume adjustment mode easyily
recognizable by the word “voice” ashing on the bottom of the screen.
• To increase volume, press "Purify+"; to decrease volume press
"Washing-" (Note: The unit comes from the factory with the volume
set at 50% volume).
• Once you have completed adjusting your volume press "Set up" to
save your settings.
FILTER RESET
• Ensure machine is plugged in.
• Press and hold the "Mode" button for 10 seconds until the mode option
appears on screen. Then release Mode button.
• Scoll through menu by pressing "Mode" until you reach desired lter
which is located on top of the LED screen.
• Press the "Purify+" symbol to reset the lter count (Note: when resetting
lter 1, lter count will display 400, and resetting lter 2 count will display
800. Once they are reset, the number will decrease as lters are used. The
lter is due for replacement when the count reaches 0).
• Press "Set up" to exit menu screen.
www.LifeIonizers.com/Support 23 75
9000/9100/9200
Operation Warnings / Error Messages
Error Codes
E0 : Sliding door open
E1 : Water ow from faucet is either too high or too low
If the following error messages appear on the LCD screen,
be sure to contact our technical support at 866.321.3116.
E2 : Filter memory reading problem
E3 : Filter life screen display problem
E4 : Filter re-set problem
E5 : Overload and temperature problem
• Improper use may cause structural damage to the unit or physical injury.
• Do not make any adjustments to the unit.
• Do not place anything on the unit.
• Disassemble the alkaline water outlet pipe (power set hose) before
picking up the unit. Failure to do so may cause the hose to break
which will result in water leakage.
• Water drain outlet should not be closed.
• Be sure to check the electric power 110V/220V prior to use.
• In case of malfunction, contact Life Ionizers™ Technical Support at
760.585.1692.
• Do not use hot water as the ionizer is meant for cool water only.
• Unplug the electric power when not in use for a long time (over a week).
• Do not use underground water, polluted water or metallic water.
• Do not use water with a temperature of over 35° Celcius/ 95° Fahrenheit
as it may cause damage or short lter life (Room temperature is best).
• Do not use pre-ionized water.
• Do not clean the unit with alcohol.
• Only use certied replacement lters.
• Be careful not to shake or drop the unit.
www.LifeIonizers.com/Support
24
Filters
High Density Sediment Layer
Eliminates sediments (mud, rust, sand, etc)
5 microns or larger.
Vitamin C Ceramic TechnologyTM (patent pending)
For the reduction of Chlorine and Chloramines.
Activated Carbon
Ultra-ne coconut shell carbon.
High Density Sediment Layer
Eliminates sediments (mud, rust, sand, etc)
5 microns or larger.
Activated Carbon
Ultra-ne coconut shell carbon.
High Density Sediment Layer
Eliminates sediments (mud, rust, sand, etc)
5 microns or larger.
75
9000/9100/9200
High Density Sediment Layer
Eliminates sediments (mud, rust, sand, etc)
5 microns or larger.
Activated Carbon
Ultra-ne coconut shell carbon.
High Density Sediment Layer
Eliminates sediments (mud, rust, sand, etc)
5 microns or larger.
Sediment Layer
Eliminates sediments (mud, rust, sand, etc)
10 microns or larger.
www.LifeIonizers.com/Support 25
anode cathode
During electrolysis, the cathode has a negative charge and produces
alkaline ionized water (pH range 7.5~10) with negatively charged
hydroxyl ions, and attracts alkaline minerals - such as calcium, potassium,
magnesium, and sodium.
The anode has a positive charge and produces acidic ionized water (pH
range 3.5~6.5) with positively charged hydroxide ions and attracts acidic
minerals – such as chlorine, sulphur, phosphorus.
Explanation of Ionized Water
75
9000/9100/9200
www.LifeIonizers.com/Support
26
1. If the machine has not been used for several days, let the water run on the
“Puried Water” setting for at least 3-5 minutes before any operation.
2. First time users who are not familiar with this water are recommended to start
with Ionized Alkaline Water level 1 and adjust the quantity or level of wate
which might t you the best. Increase slowly over time as your body adjusts.
(Level 1 is recommended for rst time Alkaline Ionized water drinkers).
3. Store Ionized Alkaline Water in an airtight glass container and put it in a
refrigerator for no longer than 2 days for maximum benet. The rst 12 hours
after ionization the water is most eective.
Acidic water is not drinkable – DO NOT DRINK
1. Use acid water only for disinfecting, cleaning, plants and as a
face/skin toner.
2. Acidic water properties are the best 1-7 days after ionization if
it is put in an airtight glass container and kept refridgerator.
1. Clean water is chlorine free due to the internal ionizer lters
and ionizer pre-lters.
2. It is best to drink puried water when taking medication.
3. Can a person drink Ionized Alkaline Water when on medication?
-Yes, as a precaution DO NOT DRINK Ionized Alkaline Water 45
minutes to one hour before and after taking medication or
supplements.
Puried Water Usage Guide
Acidic Water Usage Guide
Alkaline and Acidic Water Usage Guide
Please note that water will come out of both spouts when dispensing water.
A) When the Alkaline button is pressed, Alkaline water will be dispensed from the top spout
and acid water will be dispensed from the bottom spout.
B) When the Acid button is pressed, Acid water will be dispensed from the top spout and
Alkaline water will be dispensed from the bottom spout.
C) When the purify button is pressed, puried water will be dispensed from the bottom and
top spouts.
75
9000/9100/9200
www.LifeIonizers.com/Support 27
Highly Ionized Alkaline Water: pH 11.0+
Highly Ionized Alkaline Water is useful for cleaning and preparing food.
Food Preparation: Wash Vegetables and fruit.
Cleaning: Clean cutting boards with. Good for cleaning oil and tough grime
from vents, as well as for general cleaning in the kitchen.
Stain Removal: The extra strength, absorption power will remove coee,
soy sauce and oil stains with ease. Also great for getting out stubborn toilet
bowl stains.
Dishes: Use less detergent when hand washing dishes. Save on water bills,
as only one-third to one-forth of the usual amount of water is adequate
cleaning and for rinsing with detergent.
Water pH: 8.0-10.0
For drinking, food preparation, watering plants, health maintenance.
Drinking: Drink at least eight 8 ounce glasses of water every day to main-
tain proper hydration levels and support a healthy pH balance. Alkaline
water is an important part of a healthy diet.
Food Preparation: Clean vegetables and sh. Enhance the avor of brocco-
li, onions, etc. by pre-boiling them in Ionized Alkaline Water. Use less condi-
ments and salt in your diet.
Rice: Use Ionized Alkaline Water for washing and cooking rice. The result is
delicious and uy rice.
Tea: Taste and aroma are everything to many people. You will be
surprised at the improved color, taste, and aroma. You can use less tea and
still achieve a full rich taste.
Uses for Ionized Alkaline Water
75
9000/9100/9200
www.LifeIonizers.com/Support
28
Soups and Stews: Ionized Alkaline Water draws out the avor of
ingredients so they get tender and juicy. Therefore, less seasoning such as
salt and soy sauce are needed. This water is good for people who want to
reduce their salt intake.
Plants: Watering plants and owers. Ionized Alkaline Water extends the
freshness and life of plants. Ionized Alkaline Water with a pH level of 9.0
can also restore the health of sick plants. Ionized Alkaline Water stimulates
germination and improves seeding development.
Animals: Your animal’s health will improve dramatically. Unpleasant
body order will decrease, as well as the odor of feces and urine.
Crafts: Excellent for dyeing cloths, as well as other craft projects. You will
love the vibrant colors obtained when using this water.
Health: Through continuous use, the acidic tendency of your body can
be gradually corrected to an Alkaline levels. Drink at least half your body
weight in ounces in order to gradually change an acidic level to a slightly
Alkaline one.
Other Uses: Some medical studies suggest that alkaline water reduces
free radicals. Proponents refer to alkaline water as “Antioxidant Water”, and
believe it slows down aging and stabilizes body temperature.
Water pH: 7.0
Free of chlorine, rust and cloudiness. Clean water is delicious drinking
water.
Children: Use puried water with a pH of 7.0 when preparing baby food.
75
9000/9100/9200
www.LifeIonizers.com/Support 29
Water pH: 4.0-6.0
Face wash: The astringent properties of acidic water are eective in
toning and rming your skin. Pat the skin and leave to dry. This water
is also excellent as a toner after shaving.
Hair Care: Use this water to rinse your hair after shampooing. Reduces
annoying tangles and brings out a radiant shine. Keep in a spray
bottle and spray your hair and face when you’re out and about.
Bath Water: Add acidic water to your bath water to keep your tub
free of bathtub rings. Bathing in this water gives your body a warm
and comfortable feeling.
Pet Care: Spray your pet with this water and brush afterwards to
obtain soft and shiney fur. Great for grooming your pet!
Rinse Cycle: Soaking with acidic water before the spin cycle will
soften your clothes.
Cooking beans: Various types of beans, such as kidney beans and
green peas, will cook to perfection. Just be careful not to overcook
your beans. Acidic water will speed up the cooking time! This is
energy saving water!
Fried Food: Fried food comes out nice and crispy if you rinse it in
acidic water before frying.
Frozen food: Spray foods with acidic water when freezing so that
the food, including sh and shrimp, does not lose its avor when
thawed.
Stains: To remove stains, grime and grease, leave to soak in water for
24 hours.
Dishes: Dishes and glasses come out sparkling clean.
Polishing: Polish mirrors, eyeglasses, glass objects and windows to a
high sheen.
House Cleaning: Remove dirt from hardwood oors, ceramic tiles,
etc. without leaving a sticky residue.
Uses for Acidic Water
75
9000/9100/9200
www.LifeIonizers.com/Support
30
LIFE MESH TechnologyTM – Our MESH technology is designed
so that the water moves in and out of the plates, resulting in
more contact time and better electrolysis. The result is water
with a higher pH and stronger ORP (Oxidation Reduction
Potential = Antioxidant power).
Better machine = Better results.
SMPS Power System- Combine MESH Technology with our
new advanced SMPS Power System (the same system used in
High Denition Televisions) and your LIFE Ionizer® 9000 series
will will outperform any other model in its class. The system
generates up to 386 watts of power and it can be adjusted to
compensate for hard water problems. SMPS Power means
your system will run more eciently provide consistent power,
and will last longer.
UV Light System- LIFE UV Light Technology™ is an optional
feature on our Life Ionizers™. UV light kills cysts and bacteria
as the water passes around the light inside the unit. UV Light is
being used by major municipal water authorities such as New
York City and Orange County, CA as added treatment to
disinfect their water.
Performance Features
75
9000/9100/9200
www.LifeIonizers.com/Support 31
Common Problems and Solutions
•Unitmaynotbeplugged
in correctly.
•Unitmaybepluggedinto
an outlet controlled by a
switch.
•Fuseatthebottomofthe
machine may be blown.
•Makesurepowerplugis
plugged into outlet
correctly.
•Plugunitintoanoutletthat
is constantly ‘hot’.
•Replacethefuseatthebottom
of the unit.
•Thepower
light is not
on or the
power switch
doesn’t seem
to work.
•AngleValveAdapter
and/or cold water
supply are turned o.
•Oneormoreofthewater
supply tubes is crimped.
•Housewaterpressureis
too low.
•Pre-lterand/orunit
lters are blocked.
•Water
volume is low
or doesn’t
come out of
the unit.
•Makesureallwatersupply
valves are open.
•Checkallhosesandtubes.
•Waterpressuremaybelow
for many reasons
(RO system, sprinkler
system, etc)
Call LIFE IonizersTM Tech
Support for assistance.
•Ifunithasbeenusedfor
6 months or more, replace
lters as needed.
•Tubingtopre-lteris
not seated deeply
enough.
•O-Ringsinsidethe
pre-lter are not seated
correctly or are being
crimped due to housing
cover being on too tight.
•Disconnectandreseat
tubing at least 3/4 inches into
lter.
•Disconnecttubingand
unscrew housing cover. Make
sure O-Rings are seated
properly.
•Pre-lteris
leaking.
•Tubeisnotseated
properly or there is a
hole in the tubing.
•Tubingis
leaking.
•Disconnectandreconnect
tubing making sure it is
seated 3/4 inch deep or
replace tubing.
75
9000/9100/9200
www.LifeIonizers.com/Support
32
Common Problems and Solutions
•Waterhasan
unpleasant
odor or taste.
•Theinternalltersmay
need to be replaced.
•Watersourcerequiresa
pre-lter or RO* lter.
•Callyourdealertoplacean
order for new lters.
•CallLIFEIonizersTM for a water
quality report for your area.
•Unitis
making an
unsual noise.
•Theproblemis
internal and requires
a qualied technician.
•Unplugtheunitfrom
the power source and
call Technical Support.
•Ionizeris
leaking.
•Theproblemis
internal and
requires a qualied
technician.
* Reverse Osmosis: Check all external hoses and ttings
•Unplugtheunitfrom
the power supply and
call Technical Support.
75
9000/9100/9200
www.LifeIonizers.com/Support 33
Acidic Cleaning Instructions
& Routine Maintenance
75
9000/9100/9200
Many locations have excessive mineral content in the source
water that can build up inside the ionizer over time and cause
blockage. A routine acidic cleaning of the ionizer chamber
will help maximize the life and performance of your ionizer by
reducing the build-up of these minerals.
In areas with heavy mineral content, this is recommended once
a week. It is also recommended to do this procedure in the
evening as it takes several hours to be eective.
• Run the ionizer on acid level 4 for one minute.
• Turn o the source water to the ionizer.
• Let the water “soak” in the chamber overnight
(several hours).
• Run the unit again on acid level 4 to rinse the
minerals from the machine.
• Return the unit to normal operation.
Note: Our Citric Acid Cleaning Filter (available for purchase
online) will be needed to clean the internal workings of the
machine. This procedure must be performed 3-4 times per
year to keep warranty intact.
www.LifeIonizers.com/Support
34
Q: What should I expect from drinking Ionized
Alkaline Water?
A: This will inially depend on what level of strength you
begin drinking Ionized Alkaline Water. Ionized Water provides
your body with lots of oxygen, which is why it gives us energy.
Ionized Water is much smoother tasng than convenonal
water. It makes beer coee, tea, juice, etc. Ionized Alkaline
Water is wonderful to cook with because it helps hydrate the
food and bring out its avor. However, other changes in your
body will be much more subtle. If you have accumulated acid
waste in your system, it probably took years for you to get
into that condion and it will take some me to reverse it. As
the body is slowly brought into pH balance by drinking Ionized
Water, it will naturally begin to funcon more eciently and
problems will begin to correct themselves.
Q: Who should drink Ionized Alkaline Water?
A: People, pets and animals will all noce benets from drinking
Ionized Alkaline Water.
Q: Is there anyone who should not drink Ionized
Alkaline Water?
A: Some people must start by drinking very small amounts of
Ionized Alkaline Water, such as 8 oz. of strength level 1 (one) per day.
This is especially true of the elderly who oen have unfortunately
allowed heavy metals and other toxins to accumulate in their
bodies. Somemes years of medicaon has accumulated in them
as well. Children 3 years and younger should not drink Ionized
Alkaline Water. They may only drink the puried water from the
Ionizer. Children between the ages of 4 years and 12 years should
only drink Ionize Ionized Alkaline Water at strength level 1 (one)
and strength level 2 (two). Children between the ages of 4 and 12
Frequently Asked Questions
75
9000/9100/9200
www.LifeIonizers.com/Support 35
years of age should never drink Ionized Alkaline Water at strength
level 3 (three) or strength level 4 (four).
Q: Should I take medication or supplements with Ionized
Alkaline Water?
A: Due to the superior quality of ionized, alkaline, microclustered
water and its enhanced hydraon capabilies, we do not
recommend its use for 30 minutes before and aer with
prescripon or over the counter medicaons. However, we highly
recommend its use with vitamins, supplements, nutrional
powders and other nutraceucals because of its superior quality
and enhanced absorpon capabilies.
Q: Can a person become too Alkaline from drinking
Ionized Alkaline Water?
A: People have been known to drink as much as 1 to 2 gallons of
Ionized Water every day with great benet. Conversely, one of
the most common imbalances people have today is that they are
too acidic. Our body’s pH should be approximately 7.2 (measured
through saliva or urine). It is rare for a person to acquire Alkalosis,
the condion of being too Alkaline. We should always drink
Ionized Alkaline Water and eat Alkaline Foods such as fruits and
vegetables.
Q: How much water should I drink and at what level?
A: At a minimum, you should drink half your body weight in
ounces per day. For example, a person weighing 100 pounds
should drink 50 ounces. You should start slow at strength
Level 1 (one), drinking 1-3 glasses per day for the rst week.
You may increase the number of glasses per day during the
rst week if you do not noce any side eects. If you do not
feel any u-like symptoms at the end of the rst week, move
up to strength Level 2 (two). On strength Level 2 (two), drink
1-3 glasses per day for the rst week. You may increase the
number of glasses per day during the rst week if you’re
75
9000/9100/9200
www.LifeIonizers.com/Support
36
feeling good. On average, two to three weeks per level; work
your way up to a 10.5 pH (strength Level 4 (four). The higher
the strength level of Ionized Water you can drink, the beer it is
for you because the water is more Alkaline, more Detoxifying,
and a stronger Anoxidant that provides your body with more
Oxygen.
Q: When will I begin noticing the health benets?
A: It varies from person to person. You might start nocing a
posive response in as lile as one day or within a few weeks.
Q: Why do some people have u like symptoms when
rst drinking Ionized Alkaline Water?
A: If you start drinking Ionized Alkaline Water at to high
strength level (high pH level) then you might noce u like
symptoms. The Ionizaon process creates water molecule
clusters that are half the size of regular water molecule
clusters. This is why Ionized Alkaline Water is somemes
referred to as “microclustered water” because water moledule
clusters have been reduced in size from a 12 water molecules
per cluster to 6 water molecules per cluster. This makes the
water much more hydrang because it ows through our body
ssue more easily, thus pushing toxins out of our system. It is
this detoxifying eect that somemes gives people headaches
and diarrhea, and that is why there are 4 levels of strength.
Q: How does Ionized Alkaline Water affect athletes?
A: In an extremely posive way, as you might expect. Blood
oxygen levels will rise at varying amounts with regular use of
strong Ionized Water. This increases stamina, endurance and
provides the muscles ssue and organs with high amounts of
oxygen, which the human body oen lacks, even in athletes
because inadequate diets. Proper hydraon sustains the body’s
physiological responses in all acvies, but the physical and
mental stresses of athlec training and compeon magnify
75
9000/9100/9200
www.LifeIonizers.com/Support 37
the importance of hydraon. Numerous studies conducted on
athletes since the 1940s have demonstrated that even mild
dehydraon impairs performance. Current thought is that
athletes consuming a tradional Western diet have consumed
an abundance of salt, so there is no need to replace salt
when exercise last less than two hours. Water that has been
alkalinized may help neutralize the exercise induced acidosis
(lacc acid build up), since the pH of Ionized Alkaline Water is
high. Ionized water may help act as a free-radical scavenger to
address the issue of accelerated oxygen consumpon. Ionized
water is micro-clustered, so it may be absorbed at a faster rate,
helping with rehydraon. Dr. Peter L. Kopko, D.C., recommends
drinking 13 to 20 ounces (2-3 cups) of water 2 hours before
exercise and 5 to 10 ounces (about 1-2 cups) every 15 to 20
minutes of exercise, depending on your total body weight.
Q: How long does Ionized Alkaline Water stay Ionized?
A: The Anoxidant (hydroxyl ions) will last approximately 18-24
hours. The Higher pH (Alkaline properes) will last approximately
1-2 weeks. The smaller molecule cluster size will last approximately
1-3 months. Does Ionized Alkaline Water have any negave eects?
Absolutely none, as long as it is used properly. Only the Ionized Alkaline
Water should be consumed. NEVER DRINK THE ACIDIC WATER.
Q: Should Pregnant Women Drink Alkaline Water?
A: We at Life Ionizers™ are oen asked the queson as to
whether alkaline, ionized water should be consumed by a
pregnant or lactang woman. We believe the prudent approach
is to exclude alkaline, ionized water throughout pregnancy and
breast feeding. It is our understanding that due to the increased
absorpon of water-hydrated caons, like potassium and
calcium, coupled with the increased concentraon of the same
caons created on the alkaline side of electrolysis, creates a
too highly concentrated electrolyte soluon for a developing
fetus and breast-feeding infant. Switch to the puried mode
during pregnancy and unl breast-feeding is concluded.
75
9000/9100/9200
www.LifeIonizers.com/Support
38
Q: How does a water ionizer work?
A: Our counter top Alkaline LIFE Ionizer® 9000 series can
be directly connected to a diverter valve at the end of your
faucet. Connecng directly to your faucet takes about 10-
15 minutes and enables your water ionizer to use a two
step process. The rst task is to help lter out harmful
components of the water with our built-in dual lter
system, which removes chlorine, trihalomethanes, phenols,
sediment, odor, taste, and organic waste. The LIFE Ionizer®
achieves this by using mul-stage lters. Then the ltered
water passes into a patented chamber equipped with
planum-coated tanium plates. Next, an electrical charge
is introduced into this water. This is where the electrolysis
takes place. The water is separated into two streams (acid
and Alkaline) of Ionized water. The acid water (oxidized)
makes up about 30% of the water and the Ionized Alkaline
Water 70%. The reduced Ionized Alkaline Water comes out
of the faucet, which you use for drinking or cooking. The acid
(oxidized) water comes out of a separate hose leading into
the sink. The oxidaon potenal of the acid water makes
it a good sterilizing agent, ideal for washing your hands,
cleaning food or kitchen utensils, and treang minor wounds
and eczema. Caons, posively charged ions gather at the
negave electrode to create Ionized Alkaline Water, which
concentrates available Alkaline minerals, such as calcium,
magnesium and potassium from the source water. Anions,
negavely charged ions gather at the posive electrode
to make acid or oxidized water, which concentrates acid
minerals such as nitrates, suldes, chlorides, and uorides
from the source water. Remember in chemistry class,
opposites aract. A range of pH sengs from neutral to very
Alkaline or very acid is available at the touch of a buon.
The electrodes are cleaned in an automac cleaning cycle
or you can also run a manual cleaning cycle. The electrolysis
75
9000/9100/9200
www.LifeIonizers.com/Support 39
process breaks the molecular bonding of water molecules
and restructures the water clusters from usual groups of
12 or so down to about 5 or 6 molecules per water cluster.
“Clustered” water is typically characterized by smaller
groups of molecules, lower surface tensions and thus can
more easily penetrate the cellular membrane. This clean,
healthy, Alkaline Ionized Water is drawn for drinking
and cooking through the main stainless steel spout.
Q: How do I know when the lter needs replacing?
A: An LED or counter indicator on the front panel gives an
indicaon of remaining lter life. Generally the 1st lter
will last for about 8 months, the 2nd lter for about 12
months (when 2.5 gallons of water is produced per day),
but this depends on the source of water and the amount
of use. For example, if your tap water contains between
0.4 and 1.0 ppm (parts per million) of chlorine, a lter
can last 12 months for one person’s use. If greater than
1.0 ppm, the lter may last 8 months. A family of four on
a typical North American water supply will replace the 1st
lter about every 8 months. By changing your lters at
regular intervals, you are assured of the inner hygiene of
the lter.
Q: Where is the serial number located?
A: On the back of the ionizer, you will see a bar code
scker. The serial number is located below the bar code.
75
9000/9100/9200
www.LifeIonizers.com/Support
40
Q: What should be done if the machine is not to be
used for 7 days or more?
A: Remove the lter from the main body, wrap in plasc
wrapping, and store in a refrigerator. Remove the power
plug. When ready to use again, install the lter and run in the
Ionizer in the ‘PURFIED’ mode for approx. 3 minutes before
using the water.
Q: What does it mean when water ows through the
main body and it becomes warm?
A: At the start of water ow, warm water may ow out due
to room temperature or heat from the main body during
stoppage. This is not a malfuncon. Use the machine aer
starng water ow.
Q: There are white substances on the bottom of my
Alkaline Ionized water storage container. What are
these?
A: This phenomenon is caused by the calcium mineral
substances in Alkaline Ionized water. Parcularly, if the
carboxyl group (CO3) is present, it will bind to the calcium
carbonate (Ca CO3), creang such substances. This is apparent
evidence of electrolysis. Although it is safe to drink, wash the
container - add one spoon of edible vinegar and water to the
container, leave the container for approximately 1 hour, and
wash the container.
75
9000/9100/9200
www.LifeIonizers.com/Support 41
Q: What is hard water?
A: According to the U.S. Geological Survey, more than 85
percent of the United States geography has hard water.
Hard water forms when naturally occurring minerals enter
water sources. Over me these minerals are absorbed by
groundwater. The two most common types of minerals
found in hard water are calcium and magnesium
compounds. The Water Quality Associaon of the United
States denes hard water as water containing dissolved
hardness minerals above 1 GPG (grains per gallon). The
most common hardness causing minerals are Calcium and
Magnesium. Levels of hardness are classied as follows:
So Water - less than 1 GPG,
Slightly hard - 1 to 3.5 GPG
Moderately hard - 3.5 to 7 GPG
Hard - 7 to 10.5 GPG
Very Hard - 10.5 and higher GPG
Q: How do I adjust the voice volume on my water
Ionizer?
A: Turn machine on. Hold down the "Mode" buon for
5 seconds. The rst selecon on the menu is the volume
adjustment mode easily recognizable by the word “Voice”
ashing on the boom of the screen. To increase volume,
press "Purify+"; to decrease volume press "Washing-"
(Note- The unit comes from the factory with the volume
set to its maxiumum seng). Once you have completed
adjusng your volume, press set up to save your sengs
75
9000/9100/9200
www.LifeIonizers.com/Support
42
Q: Why do I want to adjust the amperage on my
Water Ionizer?
A: As you know, all water sources are not created equal. Your
water source plays an important role on how your water Ionizer
creates Ionized Alkaline Water. Being able to adjust the amperage
will allow you to nd the opmum pH for the best producon of
Alkaline Ionized water based on your water source.
Q: How do I adjust the amperage on my water
Ionizer?
A: Turn machine on. Hold down the "Mode" buon for 5
seconds. Scoll through menu by pressing "Mode" unl the
Alkali symbol appears and ashes. Press the "Alkali" symbol to
select which Alkali level you wish to adjust. Once you have
selected the Alkali level, press the "Purify+" symbol to increase
amperage or the "Washing- " symbol to decrease amperage.
(Note- the unit comes factory set at 50 and can be increased
to a maximum value of 100 or decreased to a minimum value
of 0 in 1 point increments). Once you have completed adjusng
your amperage, press set up to save your sengs.
Q: Do I need to hire a plumber to install the units?
A: Most people nd it is not necessary to call a plumber for
most standard installaons. For custom installaons, a plumber
may be needed depending on the individual circumstances.
Q: What do I do if the lters are leaking?
A: It is important to note where on the lter it is leaking. Most
leaking comes from ngs that are not seated properly. Reseat
the tubing into the lter by pushing in rmly and then pulling
back. It may be necessary to re-trim the end of the tubing to get
a fresh surface. Make sure to shut o the water before working
with the water supply lines.
75
9000/9100/9200
www.LifeIonizers.com/Support 43
Q: How do I set up the pre-lter unit?
A: The pre-lter is installed in the supply line on the ionizer.
Quick connects are provided for your convenience. Simply push
the tubing in the connector and it seals automacally. When
installing the lter for the rst me, it is suggested to let the lter
ll with water for a few minutes before turning on the ionizer.
Q: How do I know what pre-lter I need?
A: A water report is necessary to determine what type of lter
is needed. Most municipal water districts have water reports
free of charge on the internet. Most Well water owners have
their water tested by an independent water tesng company
periodically, so please provide us with a copy so that we may
custom build your pre-lter system for you at no charge. If
you can not nd a water report for the area the necessary
informaon, please contact your sales representave.
Q: What is the product warranty?
A: To validate your warranty, you must complete the warranty
card and return it or register online within 30 days of purchase.
The warranty that is in eect at the me the machine is
purchased is the one that is honored. Our warranty centers
are in the USA and Canada for your convenience. We are the
oldest and largest distributors of Alkaline home, commercial
and industrial water ionizers in North America with the nest
quality service second to none. For Europe, Asia and Africa we
have a service center in the UK. For Russia we have a service
center in St. Petersburg. We value our customers and are very
grateful for referrals. This is why we promote such a generous
return policy and why we can do with condence based on
19 years of growth and happy tesmonials. Neglect includes
using the unit in a maer inconsistent with the directions
in the owner’s manual, as breakage resulng from dropping
the unit or other carelessness. The internaonal customer
75
9000/9100/9200
www.LifeIonizers.com/Support
44
pays all internaonal customs, government fees, levies and/or
any other fees that are incurred. The warranty is valid when
all regular maintenance rounes are followed. The following
roune maintenance procedures will help keep your Ionizer
running at the opmal performance level:
• We recommend Internal lters be changed annually.
• Citric acid cleaning lter should be used 3 to 4 mes
per year
Following these easy steps ensures opmal performance and
guarantees your Lifeme Warranty (on units that have them).
The LIFE Ionizer® 5100 has a 7 year warranty with full parts
and labor. LIFE Ionizers™ 7700-C & 7700-UC have a LIFEme
warranty on all parts and 10 years warranty on labor. The LIFE
Ionizers™ 9000, 9100 and 9200 have an uncondional LIFEme
warranty and these ionizers are guaranteed forever with no
restricons!
Q: What is your return policy?
A: We invite you to try out our new range of LIFE Ionizer®
and enjoy the benets for 60 days. We are so sure that you
will be sased with your ionizer that we oer you a 60-day
money back guarantee. If at any me in the rst 60 days you
wish to return your unit, we will give you a full refund, less
15% restocking fee, as long as your ionizer is returned in as-
new condion and in its original packing. “As-new condion”
means the ionizer is not scratched, damaged or broken in any
way and is returned with all hoses, connectors, parts, manuals
and DVDs etc. The original shipping charges will be deducted
and return shipping charges must be prepaid by the purchaser.
No return can be accepted without our prior authorizaon.
We will refuse unauthorized returns. There are no returns on
merchandise purchased wholesale or through nance plans.
75
9000/9100/9200
www.LifeIonizers.com/Support 45
Q: What is your repair policy?
Labor is billed at $60/hr. Average repair me is less than one
hour and in some cases there is no charge. Minimum charge
is $0 to a maximum of $199 per occurrence. Customer is
responsible for shipping and shipping charges to and from
Repair Center. Warranes cover failures due to defects in
materials and workmanship which occur during normal wear
and tear. Warranty does not cover damage which occurs
in return shipment, or failures which result from accident,
misuse, abuse, neglect, mishandling, faulty installaon,
misapplicaon, improper inseron of consumables, set-up
adjustments, maladjustment of consumer controls, improper
operaon or maintenance, alteraon, modicaon, power
line surge, improper voltage supply, or service by anyone
other than a LIFE Ionizer® authorized repair facility. LIFE
Ionizer® will repair or replace any malfunconing ionizer for
the specied me frames disclosed above.
Limits and Exclusions:
There are no express warranes except as listed above.
From the date of purchase the warrantor is not responsible
for incidental or consequenal damage; for damages arising
out of the use of any unauthorized aachment; for damages
resulng from the use of the product with a defecve water
faucet. All expressed and implied warranes, including
warranes of merchantability and tness for parcular
purpose, are limited to the applicable warranty period. The
warranty is voided if parts used are not provided by LIFE
Ionizer®. Company products are sold subject only to the
applicable company standard printed warranty in eect at
the me of sale and such warranty shall be in lieu of all other
warranes expressed or implied. In addion, this equipment,
technology and products have not been evaluated by the
FDA, nor are they intended to treat, cure, migate, diagnose
or prevent any illness or disease. The following technology is
not intended to replace the advice of your family physician.
75
9000/9100/9200
Contact U
6352 Corte Del Abeto, Suite H
Carlsbad, CA 92011
866.321.3116 (Technical Support)
760.585.1692
*When calling technical support please be
prepared to give your ionizer serial number
located on the back of the unit.
www.LifeIonizers.com/Support
s
revised 5-6-15

Navigation menu