LS8 4M

User Manual: LS8-4M

Open the PDF directly: View PDF PDF.
Page Count: 5

DownloadLS8 4M LS8-4M
Open PDF In BrowserView PDF
Simple easy LS8 Manual
Model No:FF-B048/FF-B049
Scale Glider Radio control airplane Wingspan:4000mm
4

5

10

11 12 13

6 7

9

8

3

1
2

14

15 16

3

18 Optional Alum

retract

Basic parts
1 Carbon Rod 12*500mm for main wing joinner

10 M4*20 Butterfly Screws for lock the wings

2

Carbon Rod 10*400mm *2pcs for second wing
joinner

11 FF12-05 Linkage Stoppers*10/set

3
4
5
6
7
8
9

Plastic Servo tray *5pcs
Carbon pin 6*50mm 6pcs for stable wings
Push Rod M1.5*65 *5pcs for Flap,rudder and
004-00140 Hinges*3
Soft wire*2pcs for elevator
LL04-405B Horns 8pcs for push all the servos
Metal Pinned Hinges*4pcs for canopy

12
13
14
15
16
17
18

M3*10 Screws*4pcs for locking motor
Metal Collar*2/set
2*8mm Screws 35 pcs
Metal Clevis M1.5 *3pcs
M4*35 Screws*2/pcs for locking the stable tail
2*25mm 6pcs Pin for Wingtips
FF1-130 Optional Alum retract with servo tray*1/set

UNDER SAFETY PRECAUTIONS
This radio controlled plane is not a toy!
Always keep this instruction manual ready on hand for quick reference.
Assemble this kit only places out of children reach.
First-time builders of RC radio power model should seek the advice of experienced modellers
before beginning assembly and if they do not fully understand any parts of the construction.
Taking out liability insurance is recommended.
You are responsible for this model’s assembly and safe operation.

Page 1

You need to purchase the following accessories power system separately to complete the model.

FF3-309B Motor 720kv 1pcs
FF4-402 ESC 60A 1pcs
FF10-107 Alum Propeller &
sprinner 11*7 φ38mm /1set
FF9-912 MG Servo 17g 7pcs

FF14-03 Servo extension cable: 800mm 8pcs
FF14-06 Y# extension cable: 300mm *2pcs
Battery 5S 35C 3500-4000mAh 1pcs for electric

(1). Installing The wings: need to preparing:17g Servos*4pcs (Flyfly item no:FF9-912) Servos extension cables
800mm*6pcs (Flyfly item no:FF14-03)
Parts:Horns(No:LL04-406A/B),Servo tray ,Push robs(No:NN17-00401),Linkage Stoppers(No:FF12-05)
Push Rod Fixed to
the servo horns
Put the servo in to the servo
tray, with 2 screws locked

locked with 4 screws
Push rod & Lingkage
Stoppers

After installed like this photos

After finished like this photo, Adjust the aileron &
Flaps,then locked the Linkage stoppers,please
remember the servo horns between the Linkage
stoppers always keep in a flat line
Copyright 2015 Flyfly hobby
Web: www.flyflyhobby.com

Designed and Manufactured by: Flyfly hobby Mfg.
Email:info@flyflyhobby.com

Page 2

(2). Installing elevator & Tail Rudder: need to preparing 17g metal servos*2 pcs (FF item no:FF9-912)
Servos extension cables 800mm*2pcs (Flyfly item no:FF14-03)
Parts:Horns(FF item no:LL04-406A/B),Soft wire, Metal collar, servo tray, push rod
Linkage Stoppers(FF item no: FF12-05)
Soft wire

Metal Collar

A/B Glue 3pcs
Hinges to the tail
& rudder

Horns

Elevator After installed like this photos
Servo tray

Elevator servo wire across
from here to the nose fusealge

Locked the Elevator on the tail
fuselage with 2 screws

Soft wire across from tail to the
nose fuselage here. Use linkage
stoppers to lock the wire

Page 3

(3). Landing gear installing: : need to fit a 17g metal servos*1 pcs (FF item no:FF9-911)

Servo for Rudder

Push rod for
work retract
and clevis

Servo for retract

After installed
servos,put landing gear
in here

Use this wood
and put here

Lock with 2
screws

(4). Canopy installing

A/B Glue Metal
Pinned Hinges

Cut the transparent canopy shape, used AB
glue to fixe on the canopy framework like
these photos

Canopy lock
Please made sure the Hole is
fit to the canopy lock before d
cut the hole

We suggest add tape on the canopy
for safe when you flight
(5). Joined wings and Decals

Carbon Rod 12*500mm

10*400mm

Carbon pin 6*50mm

Page 4

1
2
3
4
5
6

On the wing left side & right side
Put on the nose fuselage right and left side
On the tail right and left side
On the fuselage rigth and left side
On the wingtips rigth and left side
On the rudder rigth and left side

3

1
1
4

5

3

3
6

2

(6). Motor & ESC & Adjustment

90mm

Copyright 2015 Flyfly hobby
Web: www.flyflyhobby.com

Designed and Manufactured by: Flyfly hobby Mfg.
Email:info@flyflyhobby.com

Page 5
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2015:09:10 17:23+08:00
Create Date                     : 2015:09:10 17:23+08:00
Format                          : application/pdf
Title                           : LS8 4M.xls
Creator                         : Administrator
Document ID                     : uuid:a74fd7f6-beca-47aa-be34-cf709df278f2
Instance ID                     : uuid:e7bbbf00-3661-4fb6-a55d-98f92ec84f81
Page Count                      : 5
Author                          : Administrator
EXIF Metadata provided by EXIF.tools

Navigation menu