LUCIA 602
User Manual: LUCIA 602
Open the PDF directly: View PDF 
.
Page Count: 3
| Download | |
| Open PDF In Browser | View PDF |
Technical Data LUCIA: Localized Utility Compact Intelligent Amplification LUCIA® 60/2 ▸▸ Maximum output power across range of loads – 2 x 30 W into 8, 4 or 2 ohms ▸▸ Auto Load SenseTM – Proprietary auto-set VPL™ (Voltage Peak Limiter) for optimum performance with any connected load ▸▸ Digital front end – Firmware controlled multi-band compressor and look-ahead limiter ▸▸ Fail-safe operation – Comprehensive short circuit, thermal, and under-voltage protection ▸▸ GPIO – Remote control (e.g. wall panel) for channel switching, level control and integration with paging systems ▸▸ Universal power supply – Operates at 100 - 240 V AC (50 or 60 Hz) ▸▸ Compact form factor – Half-rack, 1U chassis and supplied bracket for discreet on-wall mounting (e.g. behind display screens) ▸▸ ENERGY STAR® qualified – Conforms to latest specification energy efficiency standards ▸▸ Efficient Class D amplifier – Patented design for low distortion and minimal heat dissipation Great sound, flexibility and ease of use Lab.gruppen’s innovative LUCIA (Localized Utility Compact Intelligent Amplification) brings enhanced audio performance and extraordinary flexibility to a decentralized approach in AV systems design. Power, processing, control and I/O are conveniently placed exactly where they are needed. In many AV applications requiring premium audio, LUCIA offers a logical, cost-efficient and scalable solution that eliminates the complications and added expense of a centralized equipment room for amplification, matrixing and processing. All LUCIA amplifiers incorporate a digital, firmwarecontrolled front end coupled to a robust, durable and highly efficient Lab.gruppen output stage. Fast installation, reliable operation LUCIA amplifiers install quickly and easily, with the supplied wall-mount bracket enabling discreet on-wall placement behind video displays. All connections are via Euroblock screw terminals, and level setting is available on front-panel potentiometers. An advanced protection scheme protects the amplifier and connected loudspeakers from potential damage caused by clipping, thermal overload, or extreme low line voltage. ▸▸ Intelligent fan control – Silent operation at idle and at lower output levels Green credentials LUCIA amplifiers are ENERGY STAR qualified, making them an ideal choice for installation in projects seeking energy efficient certifications. The amplifiers automatically enter standby mode after a 20 minute period with no signal input, consuming less than 1 watt. Automatic power-up occurs within two seconds after an input signal is sensed. Applications • • • • • Retail outlets Bars & restaurants Entertainment venues Corporate board rooms Classrooms WWW.LABGRUPPEN.COM • • • • Multimedia spaces Hotel reception/lobbies Museums & galleries Small corporate event spaces Specifications LUCIA 60/2 General Number of powered channels Total output all channels driven Max output voltage per channel 1) Max. output current per channel 2 120 W 31 V peak 5.5 Arms Max. Output Power (all ch.’s driven) 2 ohms 4 ohms 8 ohms 16 ohms 60 W 60 W 60 W 30 W Performance THD 20 Hz - 20 kHz at 1 W into 8 ohms THD at 1 kHz and 1 dB below clipping Signal To noise ratio into 8 ohms Channel separation (Crosstalk) at 1 kHz Frequency response Input impedance Input common mode rejection, CMR <0.3% <0.2% >98 dBA >60 dB 5 Hz - 22 kHz 10 kOhm 40 dB Gain, Sensitivity and Limiters VPL for 16 ohm mode VPL for 8 ohm mode VPL for 4 ohm mode VPL for 2 ohm mode Sensitivity, balanced input Sensitivity, RCA input Input headroom for clip, balanced 2) Input headroom for clip, RCA 2) 31 V 31 V 22 V 15 V 4 dBu / 1.23 Vrms -2 dBu / 0.62 Vrms 12 dBu / 3.09 Vrms 6 dBu / 1.55 Vrms Connectors and switches Input connectors (per ch.) Input connectors (ch 1 & 2) Output connectors (per ch.) GPI (power control input) 3) GPO (power state output) 3) USB Cooling 3-pin detachable screw terminals, electronically balanced Unbalanced RCA type 2-pin detachable screw terminals 2 channels of voltage sense type. 4 pins in a detachable screw terminal. Default for gain. Contact closure type, 2 pins in a detachable screw terminal Default for external monitoring of fault/protection/power off For firmware update and configuration for the matrix models One fan, no filter required, front-to-rear airflow, temperature controlled speed Can stay off if the sustained power average stays below 2 x 6 W and the surrounding temperature is below 25 degrees C Auto mode Level adjustment (per channel) 3) The power state is controlled automatically with the audio signal Front panel potentiometer, detented from -inf to 0 dB Power Nominal voltage Operating voltage Standby consumption Mains connector 100 - 240 VAC 85 - 265 VAC <1 W IEC inlet Dimensions Weight Finish Approvals W: 216 mm (8.5”), H: 44 mm (1.7”), D: 280 mm (11”) 1.9 kg (4.2 lbs.) Black aluminum front and black steel chassis CE, CSA, CCC, PSE, FCC, ENERGY STAR Note 1): Into 8 ohms and higher Note 2): An analog soft limit will be engaged on the input above this level to reduce the clip distortion Note 3): Can be configured for different functionality via USB All specifications are subject to change without notice. WWW.LABGRUPPEN.COM Item no. TDS-LUCIA602_V1 - 06.06.2016 Specifications LUCIA 60/2 General Number of powered channels Total output all channels driven Max output voltage Max. output current LUCIA 60/2 2 60 W 21.9 V peak 3.9 Arms Max. Output Power (all ch.’s driven) 2 ohms 4 ohms 8 ohms 16 ohms 30 W 30 W 30 W 15 W Performance THD 20 Hz - 20 kHz at 1 W into 8 ohms THD at 1 kHz and 1 dB below clipping Signal To noise ratio into 8 ohms Channel separation (Crosstalk) at 1 kHz Frequency response Input impedance Input common mode rejection, CMR <0.3% <0.2% >92 dBA >60 dBA 5 Hz - 22 kHz 10 kOhm 40 dB Gain, Sensitivity and Limiters VPL for 8 ohm mode 1) VPL for 4 ohm mode VPL for 2 ohm mode Sensitivity, balanced input 1) Sensitivity, RCA input 1) Input headroom for clip, balanced 2) Input headroom for clip, RCA 2) 21.9 V peak 15.5 V peak 11 V peak 4 dBu / 1.23 Vrms -2 dBu / 0.62 Vrms 12 dBu / 3.09 Vrms 6 dBu / 1.55 Vrms Connectors and switches Input connectors (per ch.) Input connectors (ch 1 & 2) Output connector 3-pin detachable screw terminals, electronically balanced Unbalanced RCA type 2-pin detachable screw terminal GPI 3) GPO (power state output) 3) RS232 5) USB 2 channels of voltage sense type. 4 pins in a detachable screw terminal. Default for gain. Contact closure type, 2 pins in a detachable screw terminal. Default for external monitoring of fault/protection/power off Can be controlled and monitored by third parties via RS232 using both the GPI pins For firmware update and configuration with the Application Browser software Auto mode Level adjustment (per input) One fan, no filter required, front to rear airflow, temperature controlled speed. Can stay off if the sustained power average stays below 2 × 6 W and the ambient temperature is below 25 C The power state is controlled automatically with the audio signal Front panel potentiometer, detented from -inf to 0 dB Processing Features Input processing block 5) Mix matrix routing block 5) 4 EQ sections per input 2 in - 2 out mix-matrix controllable from GPI Cooling Output processing block 5) 4 EQ sections (presets available for many loudspeakers) User adjustable output look ahead limiter ADLC (Adaptive ISO 226 compensation) Latency from any input to any output User adjustable from 9.15 to 137 ms Power Nominal voltage Operating voltage Standby consumption Mains connector 100 - 240 VAC 85 - 265 VAC <1 W IEC inlet Dimensions Weight Finish Approvals W: 216 mm (8.5”), H: 44 mm (1.7”), D: 280 mm (11”) 1.9 kg (4.2 lbs.) Black aluminum front and black steel chassis CE, CSA, CCC, PSE, FCC, ENERGY STAR Note 1): Into 8 ohms and higher Note 2): An analog soft limit will be engaged on the input above this level to reduce the clip distortion Note 3): Can be configured for different functionality via USB Note 4): Included from October 2016 and onwards Note 5): DSP settings determined by settings downloaded from the Application Browser software; not configurable on the unit itself All specifications are subject to change without notice. WWW.LABGRUPPEN.COM Item no. TDS-LUCIA602_V1 - 06.06.2016
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Language : en-GB XMP Toolkit : Adobe XMP Core 5.6-c111 79.158366, 2015/09/25-01:12:00 Instance ID : uuid:8a5eb32a-d432-8949-9fce-535ff1532fd8 Original Document ID : adobe:docid:indd:abaa857f-9607-11dd-a9ac-e10bd8c35e56 Document ID : xmp.id:832abb2e-92f0-4e8e-9335-3bb0636fcd1d Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:5e575fc8-d64a-4a21-b901-7a781a1c62ae Derived From Document ID : xmp.did:26C1465E27206811808397CA10F7D21C Derived From Original Document ID: adobe:docid:indd:abaa857f-9607-11dd-a9ac-e10bd8c35e56 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Macintosh) History Changed : / History When : 2016:06:06 11:48:11+01:00 Create Date : 2016:06:06 11:48:11+01:00 Modify Date : 2016:06:06 11:48:13+01:00 Metadata Date : 2016:06:06 11:48:13+01:00 Creator Tool : Adobe InDesign CC 2015 (Macintosh) Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 3 Creator : Adobe InDesign CC 2015 (Macintosh)EXIF Metadata provided by EXIF.tools