Lego Assembly Instructions

User Manual:

Open the PDF directly: View PDF PDF.
Page Count: 7

LEGO STOVE
ASSEMBLY
Pieces
2 grey 4x6 platforms
4 white 4x2 blocks
4 red single dots
1 yellow angled piece
2 yellow corner angle pieces
4 grey single dots
Instructions
Step 1.
Place grey platform so the Lego
notches run 6 across horizontally. Then
stack the second grey piece directly on
top in the same way.
Step 2.
Place 2 white 4x2 blocks
on top of the grey platform’s
middle sixteen notches. Then
stack the remaining two white
blocks directly on top facing the
same direction.
Step 3.
Place one yellow corner angled
piece on top left corner with the angle
facing out.
Then place the longer yellow angled piece
on the two notches to the right of the corner
piece. With the angle lining up with the
corner angle.
Then place the other yellow corner angled
piece to the right of the longer yellow
middle piece with the angle facing out.
Step 4.
With the four red dot
pieces, place them in the
middle of the top white 4x2
blocks.
Step 5.
Take the four grey dot
pieces and place them on top
of the red dots.
Once the grey dots are on, your
Lego stove is complete.

Navigation menu