Leica Viva Tech Ref_en Ref En

User Manual: Leica Viva TechRef_en

Open the PDF directly: View PDF .
Page Count: 1641 [warning: Documents this large are best viewed by clicking the View PDF Link!]

Scroll down to view the document on your mobile browser.

Introduction
Table of Contents
1 Configurable Keys
- 1.1 Hot Keys
- 1.2 Favourites Key
2 TPS Settings
- 2.1 Leica TPS Favourites
- 2.2 Check Point
- 2.3 Joystick
- 2.4 Turn Instrument to Hz/V
- 2.5 Orientation With Compass
3 Main Menu
- 3.1 Main Menu Functions
- 3.2 Go to Work!
- 3.3 Jobs & Data
- 3.4 Instrument
- 3.5 User
4 Jobs & Data - Jobs
- 4.1 Overview
- 4.2 Creating a New Job
- 4.3 Job Properties and Editing a Job
- 4.4 Choosing a Job
- 4.5 Managing Job Codes
5 Jobs & Data - Data
- 5.1 Overview
- 5.2 Accessing Data Management
- 5.3 Point Management
- 5.4 Line/Area Management
- 5.5 Data Log
- 5.6 Point Sorting and Filters
6 Codelists
- 6.1 Overview
- 6.2 Accessing Codelist Management
- 6.3 Creating/Editing a Codelist
- 6.4 Managing Codes
  - 6.4.1 Accessing Codes
  - 6.4.2 Creating/Editing a Code
- 6.5 Managing Code Groups
7 Coordinate Systems
- 7.1 Overview
- 7.2 Accessing Coordinate System Management
- 7.3 Coordinate Systems - Creating and Editing
- 7.4 Transformations
  - 7.4.1 Accessing Transformation Management
  - 7.4.2 Creating/Editing a Transformation
- 7.5 Ellipsoids
  - 7.5.1 Accessing Ellipsoid Management
  - 7.5.2 Creating/Editing an Ellipsoid
- 7.6 Projections
  - 7.6.1 Accessing Projection Management
  - 7.6.2 Creating/Editing a Projection
- 7.7 Geoid Models
- 7.8 CSCS Models
8 Jobs & Data - Import data
- 8.1 Overview
- 8.2 Importing Data in ASCII/GSI Format
- 8.3 Importing Data in DXF Format
9 Jobs & Data - Export & copy data
- 9.1 Overview
- 9.2 Exporting Data from a Job to a Custom ASCII Format
- 9.3 Exporting Data in DXF Format
- 9.4 Exporting Data in LandXML Format
- 9.5 Exporting Data in FBK/RW5/RAW Format
- 9.6 Copy Data Between Jobs
10 Instrument - TPS settings
- 10.1 Measure mode & target
- 10.2 Prism search settings
- 10.3 Atmospheric corrections
- 10.4 Level bubble & compensator
- 10.5 Quality control & offsets
- 10.6 Lights
11 Instrument - GPS settings
- 11.1 RTK rover wizard
- 11.2 Satellite tracking
- 11.3 Antenna heights
- 11.4 Quality control
- 11.5 Raw data logging
12 Antenna Heights
- 12.1 Overview
- 12.2 Mechanical Reference Planes, MRP
- 12.3 Determining Antenna Heights
- 12.4 SmartStation Setup
13 Instrument connections - TPS connection wizard
- 13.1 Starting the TPS Connection Wizard
- 13.2 Connection Using Cable
- 13.3 Connection Using Bluetooth
- 13.4 Connection Using Internal Radio
14 Instrument connections - All other connections
- 14.1 Accessing Configuration Connections
- 14.2 CS Internet / GS Internet
- 14.3 GPS Rover / Base Sensor
- 14.4 ASCII Input
  - 14.4.1 Configuration of an ASCII Input Connection
  - 14.4.2 Configuration of a Command to the Device
- 14.5 GPS Hidden Pt
- 14.6 Export Job
- 14.7 RTK Rover
- 14.8 Base RTK 1 / Base RTK 2
  - 14.8.1 Configuration of a Reference Real-Time Connection
- 14.9 NMEA 1 / NMEA 2
- 14.10 Remote (OWI)
- 14.11 Total Station
- 14.12 GSI Output
15 Instrument connections - All other connections, Cntrl.. Key
- 15.1 Digital Cellular Phones
- 15.2 Modems
- 15.3 Radios for GPS Real-Time
- 15.4 Radios for Remote Control
- 15.5 RS232
- 15.6 Internet
- 15.7 Configuring the Stations to Dial
  - 15.7.1 Accessing Dial-up Connection List
  - 15.7.2 Creating / Editing a Station to Dial
- 15.8 Configuring the Server to Connect
  - 15.8.1 Accessing Server to Connect
  - 15.8.2 Creating / Editing a Server
16 Configuration of Devices
- 16.1 Devices
- 16.2 Accessing Devices / GPRS Internet Devices
- 16.3 Creating/Editing a Device
17 Instrument - Instrument status info
- 17.1 Status Functions
- 17.2 Battery & memory
- 17.3 Satellite tracking
- 17.4 RTK data link status
- 17.5 Current GPS position
- 17.6 Raw data logging
- 17.7 Connection status
- 17.8 TPS current station info
18 Instrument - Base settings
- 18.1 Satellite tracking
- 18.2 Base raw data logging
19 User - Work settings
- 19.1 ID templates
  - 19.1.1 Accessing ID Template Configuration
  - 19.1.2 Creating/Editing an ID Template
- 19.2 Coding & linework
- 19.3 My Survey Screen
- 19.4 Hot keys & favourites
20 Coding
- 20.1 Overview
- 20.2 Thematical Coding
  - 20.2.1 Thematical Coding with Codelist
  - 20.2.2 Thematical Coding without Codelist
- 20.3 Free Coding
  - 20.3.1 Free Coding Using a Codelist
  - 20.3.2 Free Coding with Direct Input
- 20.4 Quick Coding
- 20.5 SmartCodes
- 20.6 Code and Attribute Mismatch
  - 20.6.1 Code Mismatch
  - 20.6.2 Attribute Mismatch
21 Linework
- 21.1 Overview
- 21.2 Performing Linework using the Linework Field
- 21.3 Performing Linework with Thematical Coding
22 User - Working style wizard
- 22.1 Overview
- 22.2 Accessing the Working Style Wizard
- 22.3 Choosing a Different Working Style
- 22.4 Creating a New Working Style
- 22.5 Editing a Working Style
23 User - System settings
- 23.1 Regional settings
- 23.2 SmartWorx options
- 23.3 Screen & audio
24 User - Tools & other utilities
- 24.1 Transfer user objects
- 24.2 Uploading System Files
- 24.3 Load licence keys
- 24.4 Format memory devices
- 24.5 View contents of ASCII files
- 24.6 About Leica Viva
25 TPS Functions
- 25.1 EDM
- 25.2 Prism Search Methods
  - 25.2.1 Automatic aiming
  - 25.2.2 PowerSearch
- 25.3 Follow Moving Prisms - Lock
- 25.4 RCS
- 25.5 EGL
- 25.6 Illumination
26 Calculator
- 26.1 Accessing the Calculator
- 26.2 Configuring the Calculator
- 26.3 Using the Calculator
27 NTRIP via Internet
- 27.1 Configuring Access to the Internet
- 27.2 Using the NTRIP Service with a Real-Time Rover
28 MapView Interactive Display Feature
- 28.1 Overview
- 28.2 Accessing MapView
- 28.3 Configuring MapView
- 28.4 MapView Components
- 28.5 Selecting Points, Lines and Areas
- 28.6 Viewing Results
29 Applications - General
30 COGO
- 30.1 Overview
- 30.2 Accessing COGO
- 30.3 Configuring COGO
- 30.4 COGO Calculation - Inverse Method
- 30.5 COGO Calculation - Traverse Method
- 30.6 COGO Calculation - Intersection Method
- 30.7 COGO Calculation - Line/Arc Calculations Method
- 30.8 COGO Calculation - Area Division
- 30.9 COGO Calculation - Shift, Rotate & Scale
- 30.10 Selecting a Result from Previous COGO Inverse Calculations
- 30.11 Modifying Values for Azimuths, Distances and Offsets
31 Determine Coordinate System
- 31.1 Overview
- 31.2 Selecting the Transformation Method
- 31.3 The Normal Method
- 31.4 The One Point Localisation Method
32 QuickGrid
- 32.1 Selecting the Transformation Method
- 32.2 Determining a New Coordinate System
33 Reference Line
- 33.1 Overview
- 33.2 Accessing Reference Line
- 33.3 Configuring Reference Line
- 33.4 Choosing Reference Lines/Arcs
- 33.5 Measuring to a Reference Line/Arc
- 33.6 Staking to a Reference Line/Arc
- 33.7 Gridstaking to a Reference Line/Arc
- 33.8 Staking to Alignment
34 Reference Plane
- 34.1 Overview
- 34.2 Accessing Reference Plane
- 34.3 Creating/Editing a Reference Plane
- 34.4 Selecting a Reference Plane from a Job
- 34.5 Configuring Reference Plane
- 34.6 Measuring Points to a Reference Plane
- 34.7 Scanning a Plane
35 Roads - General
- 35.1 Overview
- 35.2 Accessing Roads Applications
- 35.3 Configuring Roads Applications
- 35.4 Jobs & Design Data
- 35.5 Working with Shifts
- 35.6 Tasks
- 35.7 Understanding Terms and Expressions
36 Roads - Alignment Editor
- 36.1 Basic Terms
- 36.2 Starting Alignment Editor
- 36.3 Configuring Alignment Editor
- 36.4 Edit Horizontal Alignments
- 36.5 Edit Vertical Alignments
- 36.6 Edit Cross Section Templates
- 36.7 Edit Cross Section Assignments
  - 36.7.1 Overview
  - 36.7.2 Creating/Editing a Cross Section Assignment
- 36.8 Edit Chainage Equation
  - 36.8.1 Overview
  - 36.8.2 Creating/editing a Chainage Equation
- 36.9 Convert to RoadRunner Job
37 Roads - Road
- 37.1 Creating a New Road Job
- 37.2 Defining the Work
- 37.3 Staking/Checking the Road
- 37.4 The Tools Menu
38 Roads - Rail
- 38.1 Creating a New Rail Job
- 38.2 Defining the Work
- 38.3 Staking/Checking the Track
- 38.4 The Tools Menu
39 Roads - Tunnel
- 39.1 Creating a New Tunnel Job
- 39.2 Defining the Work
- 39.3 Staking/Checking the Tunnel
40 Sets of Angles
- 40.1 Overview
- 40.2 Sets of Angles
- 40.3 Monitoring
41 Setup
- 41.1 Overview
- 41.2 Accessing Setup
- 41.3 Configuring Setup
- 41.4 Set Station Point
- 41.5 Enter Station Information
- 41.6 Setup Reminder
- 41.7 Setup Methods
- 41.8 Setup Results
- 41.9 Finding a Target Point
42 Stakeout
- 42.1 Overview
- 42.2 Accessing Stakeout
- 42.3 Configuring Stakeout
- 42.4 Staking Out
- 42.5 Stakeout Difference Limit Exceeded
- 42.6 Staking Out a DTM or Points & DTM
43 Base Menu - Start base
- 43.1 Start base over known point
- 43.2 Start base over last setup
- 43.3 Start base over any point
44 Survey - General
- 44.1 Surveying Points
  - 44.1.1 Post-Processed Kinematic and Static Operations
  - 44.1.2 Real-Time Rover Operations
- 44.2 Adding Annotations
- 44.3 Timed Measurements
- 44.4 Initialisation for Real-Time Rover Operations
45 Survey - General
46 Survey - Auto Points
- 46.1 Overview
- 46.2 Configuring Auto Points
- 46.3 Measuring Auto Points
- 46.4 Offset Points of Auto Points
  - 46.4.1 Overview
  - 46.4.2 Configuring Offset Points
47 Survey Cross Section
- 47.1 Overview
- 47.2 Accessing Survey Cross Section
- 47.3 Creating/Editing a Cross Section Template
- 47.4 Surveying Cross Sections
- 47.5 Configuring Survey Cross Section
48 Survey - Hidden Points
- 48.1 Overview
- 48.2 Hidden Point Methods
- 48.3 Hidden Point Measurements
- 48.4 Hidden Point Results
- 48.5 Computing an Azimuth
  - 48.5.1 Using the Sun
  - 48.5.2 Using Auxiliary Point
- 48.6 Computing Horizontal Distances from Slope Distances
- 48.7 Hidden Point Measurement Including Heights
49 Hidden Point
- 49.1 Overview
- 49.2 Accessing Hidden Point and Measuring
- 49.3 Configuring Hidden Point
50 Survey - Remote Point
- 50.1 Overview
- 50.2 Accessing Remote Point
- 50.3 Configuring Remote Point
51 Traverse
- 51.1 Overview
- 51.2 Accessing Traverse
- 51.3 Creating/Editing a Traverse
- 51.4 Selecting an Existing Traverse
- 51.5 Traverse Data
- 51.6 Configuring Traverse
- 51.7 Traverse Methods
- 51.8 Traverse Point Results
- 51.9 Traverse Results
- 51.10 Traverse Adjustment
  - 51.10.1 Accessing Traverse Adjustment
  - 51.10.2 Adjustment Results
52 Volume Calculations
- 52.1 Overview
- 52.2 Accessing Volumes Calculations
- 52.3 Configuring Volume Calculations
- 52.4 Calculating Volumes
Appendix A Menu Tree
Appendix B Internal Memory
Appendix C Directory Structure of the Memory Device
Appendix D Pin Assignments and Sockets
- D.1 GS10
- D.2 GS15
- D.3 CS10/CS15
- D.4 TPS1200+
Appendix E Cables
- E.1 GPS Cables
- E.2 TPS Cables
Appendix F NMEA Message Formats
- F.1 Overview
- F.2 Symbols Used for Describing the NMEA Formats
- F.3 GGA - Global Positioning System Fix Data
- F.4 GGK - Real-Time Position with DOP
- F.5 GGK(PT) - Real-Time Position with DOP, Trimble Proprietary
- F.6 GGQ - Real-Time Position with CQ
- F.7 GLL - Geographic Position Latitude/Longitude
- F.8 GNS - GNSS Fix Data
- F.9 GSA - GNSS DOP and Active Satellites
- F.10 GSV - GNSS Satellites in View
- F.11 LLK - Leica Local Position and GDOP
- F.12 LLQ - Leica Local Position and Quality
- F.13 RMC - Recommended Minimum Specific GNSS Data
- F.14 VTG - Course Over Ground and Ground Speed
- F.15 ZDA - Time and Date
Appendix G AT Commands
Appendix H Glossary
- H.1 A
- H.2 C
- H.3 D
- H.4 G
- H.5 H
- H.6 I
- H.7 N
- H.8 O
- H.9 P
- H.10 S
- H.11 T
- H.12 V
- H.13 W
Index

Navigation menu