MediaTek LinkIt™ Development Platform For RTOS Bluetooth Developer's Guide Link It Developers
LinkIt_for_RTOS_Bluetooth_Developers_Guide
LinkIt_for_RTOS_Bluetooth_Developers_Guide
LinkIt_for_RTOS_Bluetooth_Developers_Guide
User Manual:
Open the PDF directly: View PDF
Page Count: 129 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- 1. Overview
- 2. Support for Bluetooth
- 3. The Bluetooth BR/EDR Protocol and Profiles
- 3.1. GAP
- 3.2. SDP
- 3.3. HFP
- 3.3.1. HFP message sequences
- 3.3.1.1. Connection establishment
- 3.3.1.2. Connection release
- 3.3.1.3. Initiate an outgoing voice call
- 3.3.1.4. Audio connection setup
- 3.3.1.5. Audio connection release
- 3.3.1.6. Enable or disable the voice recognition
- 3.3.1.7. Incoming call actions
- 3.3.1.8. Three way call handling
- 3.3.1.9. Remote speaker volume control
- 3.3.1.10. Remote microphone volume control
- 3.3.1.11. Transmit DTMF codes
- 3.3.1.12. Query a list of current calls
- 3.3.2. Using the HFP APIs
- 3.3.1. HFP message sequences
- 3.4. A2DP
- 3.5. AVRCP
- 3.6. PBAP
- 3.7. SPP
- 3.8. AWS
- 4. The Bluetooth Low Energy Protocol or Profiles
- 4.1. GAP
- 4.2. SM
- 4.3. GATT
- 4.3.1. Create a GATT Server
- 4.3.2. Using the GATT APIs
- 4.3.2.1. Exchanging MTU
- 4.3.2.2. Primary service discovery
- 4.3.2.3. Find included services
- 4.3.2.4. Characteristic discovery
- 4.3.2.5. Characteristic descriptor discovery
- 4.3.2.6. Read the characteristic value
- 4.3.2.7. Characteristic value write
- 4.3.2.8. Long characteristic value or descriptor write
- 4.3.2.9. Characteristic value indication
- 5. Creating a Custom Bluetooth Application
- 6. Debugging and Porting Layer
- 7. Appendix A: Acronyms and Abbreviations