M508 Quick Start Guide

User Manual:

Open the PDF directly: View PDF PDF.
Page Count: 6

DownloadM508 Quick Start Guide
Open PDF In BrowserView PDF
3D PrinterQuick Start Guide

DIY 3D Printer Kit M508
Machine parameters
Printing technology

FDM

Nozzel diameter

0.3(defaut),0.4,0.5

Print size

200*200*180mm

Printing precision

0.1-0.3mm

Filament

PLA /ABS /HIPS/WOOD

Printing speed

40-100mm/s (proposal)

Filament diameter

¢1.75mm

Working condition

10-40℃

Number of extruder

1

Humidity

20-50%

Contact service:

alunar3d@hotmail.com

Technology Support:

service@alunar.net

www.alunar.net
www.alunar.net

——Please visit our sites if you would like get more information on 3D printer: http://www.alunar.net——
1

3D Printers M508 Quick Start Guide
Foreword
Thanks in advance for choosing our M508 3D Printer! With the Quick Use Manual (hereinafter as “Manual”)
guide, you could enjoy accomplishing the assembly, Test and Printing step by step. Meanwhile, you will also
learn the structure principle and its special FDM printing technology deeply, and then you will get great progress
on not only the theoretical knowledge but also the manipulative ability.
To give play to the bigger effect of the printer and ensure the worry-free buying, smooth and enjoyable using,
we spare no effect to consider the question and difficulty you will meet with from when you order the printer and
make detailed videos and pictures to show the exact settle way. We write this “Manual” elaborately in great detail
and we will always accompany with your using 3D printer. The kits would come to you with high-class part and
need you put them together. So please read the “Manual” carefully before you assembly and use the printer and
then utility our printer in strict accordance with the “Manual” to avoid the any defective or invalid use caused by
improper operation. So please keep the Manual for your easy reference.
Special Note:
With our objective of constant update for our printer, we would not make future notice to you if some
specifications and models updated. And we apologize for the inconvenience that will lead to you.

Flow Diagram for Quick Use Manual:

Matters and Attentions
and Calibration

Preparatory Work

Printing Test

Preinstallation Checklist

Senior Instruction

and Settle Way

2

Assembly

Frequently Asked Questions

Important Notice and Attentions:
1. Keep the assembling operation platform level
2. Please ensure that you move to the right tap position for input voltage (110V or 220V) of the power
supply (as shown in the picture)
Input Voltage

100~160V

200~260V

Position choice

110V

220V

Warning:Must be in
the condition of power
equipment of the
strike.

3. You need to make a proper degree of tightness of the pull belt for X axis& Y axis
4.

Ensure manual operation slide smoothly when you install the X, Y, Z axis

5.

When equipped the hotbed, you should keep the 4 angle level for sure.

6. Ensure the correct wiring for controller board and plug tightly into the exact socket.
7.

Don’t plug and unplug the wiring for controller board when power on, especially don’t plug and
unplug the connect wiring for power supply.

8. Don’t touch the extruder and hotbed when printer is power on to avoid the scald.

A.Preparatory Work
1. Tool and kit preparing: one level desk at more than 2 sq. m. size, one computer, one scissor, SD card
reader, power supply and so on.
2. Open the box you got, and read the Manual from the SD card. We suggest that you should copy all the
documents to the computer from the SD card and then start assembling according to the manual.
(SD-Card:\)

3

B.Preinstallation Checklist
1. Step Way of Opening Box: Please look over the whole box appearance and make sure whether the box
is damaged( if damaged, please feel free to contact with our customer service ); And then please open
the box and check the kits list as per “sketch map of opening carton” and “Video of opening carton”
(SD-Card:\Manual&AssemblyVideo\1-Open the carton).
2.

Take an account of kits: Please check out all the parts and make sure if any part is lost or damaged as
per the “Packing List” and video “Check out the kits”. Please feel free to contact our customer service
once you find out that you lost or got any defective parts (except leading by the unartificial reason). We
will try our best to settle your problems as soon as possible ( SD-Card:\Manual&AssemblyVideo\1-Open
the carton).

C.Assembly and Calibration for M508
1. M508 assembly: Please assembly the printer by following the step1- step7 on assembly diagram and
video, and pay attention the prompt for key of assembling.
2. Testing and Commissioning:
(1) Power on test: When connecting the power supply to your printer, please make sure whether the
power indicator light is on, LCD screen show correctly or not, hotbed and the extruder can be
heated rightly or not, the thermistor, turbine fan and radiator fan works normally or not;
(SD-Card:\Manual&AssemblyVideo\2-Assembly and debugging\2-Power on inspection)
(2) Hotbed leveling test: Please make calibration to level the hotbed according to the video
(SD-Card:\Manual&AssemblyVideo\2-Assembly and debugging\3-Hot bed leveling)
(3) Change the Filament: Watch the video “how to change the filament “ and get the operation way of this
special feature of this printer(SD-Card:\Manual&AssemblyVideo\2-Assembly and debugging\5-Change
filament)
(4) Feature Demonstration: watch the video “Basic Feature Demostration” and get the operation way
of all basic feature;(SD-Card:\Manual&AssemblyVideo\2-Assembly and debugging\4-Function
introduction)

D. Printing Test:
After all the above-mentioned test and you make sure the printer works well. Now you can get start a
4

printing test. Please insert the SD Card into the card slot on the left back of the screen and then choose the
“test-*.gcode” file and start printing with rotating the spin button. (SD-Card:\Manual&AssemblyVideo\3-Test
print\test-*.gcode)

Congratulations! You’ve already accomplish the whole assembly for the M508. Please feel free to
contact our customer service if you have any problem on technology or other. We will spare no effect to
settle your problems accordingly. As you complete the printing test, you would be pride of yourself by
creating the first 3D printer work. And welcome to share your amazing and successful DIY experience to
our page online ( www.alunar.net )

E. Senior Instruction
1.

Off-line Printing: copy the “X.gcode”file to the SD card and insert the card into your printer, then start
your printing directly. And you need to change it to “X.gcode”if the file you want to print is “X.STL”.
How to use slicing software: Please open the “SD-Card: \ Software\Slicing software” and click the
software“Cura 15.04” to slice the printing file as per the use manual shown on “How to use Cura”.

2.

Online Printing: Connect the printer to your computer and then you can get start printing by computer
control.
Connecting to your computer with USB cable: Please open the “SD-Card: \ Software
\RepetierHost_1_0_6” and click the software“RepetierHost_1_0_6”, then you can start printing with
slicing the printing file by Repetier according to “How to use Repetier”.

F. Frequently Asked Questions and Solutions
1. Please get the “Common problem” from the SD card for your reference(SD-Card:\Manual\5-Common
problem)

PS: Please visit our sites if you would like get more information on 3D printer:http://www.alunar.net.

5

6



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 6
Language                        : zh-CN
Tagged PDF                      : Yes
Author                          : 微软用户
Creator                         : Microsoft® Word 2010
Create Date                     : 2016:07:08 12:58:18+08:00
Modify Date                     : 2016:07:08 12:58:18+08:00
Producer                        : Microsoft® Word 2010
EXIF Metadata provided by EXIF.tools

Navigation menu