MC300 API Reference Manual 20161010

• 1. Linux STANDARD C Function
• 2. System Error Code Defination
• 3. AT Commad API
  •  hfat_get_words
  •  hfat_send_cmd
• 4. DEBUG API
  •  HF_Debug
  •  hfdbg_get_level
  •  hfdbg_set_level
• 5. GPIO Control API
  •  hfgpio_configure_fpin
  •  hfgpio_fconfigure_get
  •  hfgpio_fpin_add_feature
  •  hfgpio_fpin_clear_feature
  •  hfgpio_fpin_is_high
  •  hfgpio_fset_out_high
  •  hfgpio_fset_out_low
• 6. WIFI API
  •  hfsmtlk_start
  •  hfsmtlk_stop
  •  hfwifi_scan
• 7. UART API
  •  hfuart_close
  •  hfuart_open
  •  hfuart_send
  •  hfuart_recv
• 8. Timer API
  •  hftimer_start
  •  hftimer_create
  •  hftimer_change_period
  •  hftimer_delete
  •  hftimer_get_counter
  •  hftimer_get_timer_id
  •  hftimer_stop
• 9. Multitask API
  •  PROCESS
• 10. Network API
  •  hfnet_start_uart
  •  hfnet_start_socketa
  •  hfnet_start_socketb
  •  hfnet_tcp_listen
  •  hfnet_tcp_unlisten
  •  hfnet_tcp_close
  •  hfnet_tcp_connect
  •  hfnet_tcp_disconnect
  •  hfnet_tcp_send
  •  hfnet_udp_create
  •  hfnet_udp_close
  •  hfnet_udp_sendto
• 11. System Function
  •  hfmem_free
  •  hfmem_malloc
  •  hfmem_realloc
  •  hfsys_get_reset_reason
  •  hfsys_get_run_mode
  •  hfsys_get_time
  •  hfsys_nvm_read
  •  hfsys_nvm_write
  •  hfsys_register_system_event
  •  hfsys_reload
  •  hfsys_reset
  •  hfsys_softreset
  •  hfsys_switch_run_mode
• 12. User Flash API
  •  hfuflash_erase_page
  •  hfuflash_read
  •  hfuflash_write
• 13. User File API
  •  hffile_userbin_read
  •  hffile_userbin_size
  •  hffile_userbin_write
  •  hffile_userbin_zero
• 14. Auto-updgrade API
  •  hfupdate_complete
  •  hfupdate_start
  •  hfupdate_write_file
• Appendix a：hardware timer
• Appendix b：GPIO Interrupt