SK1604 2 M Cut Support Fax

User Manual: M-CutSupportFax

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadSK1604-2 M-Cut Support Fax
Open PDF In BrowserView PDF
M-CUT FAX COVER SHEET
Date: ______________________
Atten: Contrex Technical Support
Fax Number: 1-763-424-8734
From:
Name ______________________________________________
Company _______________

Telephone #________________

Ext___________________
Fax # _________________

We have ______ M-Cut(s) that are used for: _______________________________________
__________________________________________________________________________
__________________________________________________________________________

Serial Communication Hookup: _____Yes _____No

Brief Description of the Problem: ________________________________________________
__________________________________________________________________________
__________________________________________________________________________
__________________________________________________________________________
__________________________________________________________________________
__________________________________________________________________________
__________________________________________________________________________
__________________________________________________________________________
We are transmitting _____ pages, including:
this (two sided) Fax Cover Sheet,
a sketch of the system that the M-Cut is integrated with.

Please turn the page to record any CPs that you have changed from the default value—>

SK1604 Rev 2

Please record the Control Parameters that you have changed from the default value:
Code# Description
CP-01
CP-02
CP-03
CP-04
CP-05
CP-06
CP-07
CP-08
CP-09
CP-10
CP-11
CP-12
CP-13
CP-14
CP-15
CP-16
CP-17
CP-18
CP-19
CP-20
CP-21
CP-22
CP-23
CP-24
CP-25
CP-26
CP-27
CP-28
CP-30
CP-31
CP-32
CP-33
CP-34
CP-35
CP-36
CP-37

Cut Length 1
Move Speed 1
Accel Time 1
Decel Time 1
Batch Count 1
Reg Length 1
Direction 1
Cut Length 2
Move Speed 2
Accel Time 2
Decel Time 2
Batch Count 2
Reg Length 2
Direction 2
Cut Length 3
Move Speed 3
Accel Time 3
Decel Time 3
Batch Count 3
Reg Length 3
Direction 3
Cut Length 4
Move Speed 4
Accel Time 4
Decel Time 4
Batch Count 4
Reg Length 4
Direction 4
Scale Factor
Time Unit (Min/Sec)
Kerf
Profile Sequence
Index Polarity
Back-Step Length
Home Offset
Jog Speed

User
Record

Code# Description
CP-38
CP-39
CP-60
CP-61
CP-62
CP-63
CP-64
CP-65
CP-66
CP-68
CP-70
CP-71
CP-72
CP-73
CP-78
CP-79
CP-80
CP-81
CP-82
CP-83
CP-84
CP-85
CP-86
CP-87
CP-88
CP-89
CP-90
CP-91
CP-92
CP-93
CP-94
CP-95
CP-96
CP-97
CP-98

User
Record

High Speed Alarm
Position Error Alarm
Direct Enable
Direct Command
Feedback PPR
S-Curve Enable
Kff
Kp
Ki
Unipolar/Bipolar
Device Address
Baud Rate
Character Format
Control Mask
Automatic Home Reset
Keypad Lockout Mask
In-Position Band
In-Position A Delay
In-Position A Dwell
In-Position A Polarity
In-Position B Delay
In-Position B Dwell
In-Position B Polarity
In-Position C Delay
In-Position C Dwell
In-Position C Polarity
In-Position A Enable
In-Position B Enable
In-Position C Enable
In-Pos C Delay Control
In-Pos C Prof 1 Delay
In-Pos C Prof 2 Delay
In-Pos C Prof 3 Delay
In-Pos C Prof 4 Delay
Resume In-Pos Control

Please record what the relevant Monitor Parameters display when the problem occurs:
Code# Description
MV-40
MV-41
MV-42
MV-43
MV-44
MV-45
MV-46
MV-47
MV-48
MV-49
MV-50
MV-51

Position
Position Command
Position Error
Speed
Speed Command
Index Position
Feedback Frequency
DAC Output
Trim Output
Batch Count
Keypad Errors
Active Profile

Displayed Code#
MV-52
MV-53
MV-54
MV-55
MV-56
MV-57
MV-58
MV-59
MV-74
MV-99
MV-00

Description
Alarm Status
Control State
Discrete IN A
Discrete IN B
Discrete IN C
Discrete OUT A
Discrete OUT B
Line Notch Counter
Comm Error
Software Code Revision
Software Part Number

Displayed
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Modify, Copy, Annotate, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2004:05:31 08:31:05-05:00
Modify Date                     : 2004:05:31 08:31:10-04:00
Subject                         : SK1604-2
Page Count                      : 2
Creation Date                   : 2004:05:31 13:31:05Z
Mod Date                        : 2004:05:31 13:31:05Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : davef
Keywords                        : 
Metadata Date                   : 2004:05:31 13:31:05Z
Creator                         : davef
Title                           : SK1604-2
Description                     : SK1604-2
EXIF Metadata provided by EXIF.tools

Navigation menu