MF244dw/MF232w Getting Started Manual MF244dw GS US Multi

User Manual: Manual Canon imageCLASS MF232w Getting Started | Manual Device

Open the PDF directly: View PDF .
Page Count: 64

Download
Open PDF In Browser	View PDF

Getting Started

For Mac OS users,
please refer to P.13

Si vous utilisez Mac OS,
reportez-vous à la P.27

Para usuarios de Mac OS,
consulte la pág.41

Para usuários de Mac OS,
por favor consulte a pág.55

You can access http://canon.com/oip-manual to
read the User’s Guide that describes all functions
of this machine.
FT6-1696 (000)

Installing the Machine
Installation Requirements
●

14 1/4"
(360 mm)

15 3/8" 1 1/2"
(390 mm) (39 mm)

10 5/8"
(270 mm)

14 1/4" 4 1/4"
5”
(128 mm) (362 mm) (106 mm)

12 1/4"
12 1/4"
(312 mm) (310 mm)

15 3/8"
(390 mm)

5"
14 1/4"
(128 mm) (362 mm)

Remove all the tape.

Installing the Machine

Contents
About the Manuals .......................................................................8
Navigating the Menu and Text Input Method ....................8
Connecting the Power Cord and Turning ON
the Power .........................................................................................8
Specifying the Initial Settings ...................................................9
Choosing the Method to Connect the Machine ................9
Choosing the Method to Connect:
Via Wireless LAN or Other Method ..........................................9
Connecting via a Wired LAN ................................................... 10

Connecting via a USB Cable ................................................... 10
Connecting via a Wireless LAN .............................................. 10
Setting Wireless LAN ................................................................. 11
Setting a Paper Size and Type ................................................ 13
Perform Useful Tasks ................................................................. 14
Replacing Toner Cartridge ...................................................... 15
Clearing Paper Jams .................................................................. 16

* For Mac OS users, please refer to P.13

Table des matières
A propos des manuels .............................................................. 22
Navigation dans le menu et méthode de saisie du
texte ................................................................................................ 22
Branchement du cordon d’alimentation et mise sous
tension............................................................................................ 22
Configuration des réglages initiaux .................................... 23
Choix de la méthode de connexion de la machine ....... 23
Choix de la méthode de connexion de la machine :
Méthode via réseau sans fil ou autre................................... 23

Connexion via un réseau filaire ............................................. 24
Connexion via un câble USB................................................... 24
Connexion via un réseau sans fil........................................... 24
Configuration du réseau sans fil ........................................... 25
Réglage du format et du type de papier............................ 27
Procédures utiles ........................................................................ 28
Remplacement de la cartouche d’encre ............................ 29
Résolution des bourrages papier ......................................... 30

* Si vous utilisez Mac OS, reportez-vous à la P.27

Contenido
Acerca de los manuales............................................................ 36
Navegación por el menú y método de introducción
de texto .......................................................................................... 36
Conexión del cable de alimentación y encendido del
interruptor de alimentación ................................................... 36
Especificación de la configuración inicial .......................... 37
Selección del método de conexión del equipo............... 37
Selección del método de conexión: a través de red
LAN inalámbrica u otro método ........................................... 37

Conexión mediante una red LAN cableada ...................... 38
Conexión con un cable USB.................................................... 38
Conexión mediante una red LAN inalámbrica................. 38
Configuración de LAN inalámbrica ...................................... 39
Ajuste del tamaño y el tipo del papel ................................. 41
Tareas útiles .................................................................................. 42
Sustitución del cartucho de tóner........................................ 43
Eliminación de atascos de papel .......................................... 44

* Para usuarios de Mac OS, consulte la pág.41

Índice
Sobre os manuais ....................................................................... 50
Navegação pelo menu e pelo método de entrada de
texto ................................................................................................ 50
Como conectar o cabo de alimentação e ligar a
máquina......................................................................................... 50
Especificação das configurações iniciais............................ 51
Escolha do método de conexão da máquina................... 51
Escolher o Método para Conectar:
Através de LAN sem fio ou outro método ......................... 51

Conexão via LAN com fio......................................................... 52
Conexão via cabo USB .............................................................. 52
Conexão via LAN sem fio ......................................................... 52
Configurações da LAN Sem Fio ............................................. 53
Configuração do tamanho e do tipo de papel ................ 55
Tarefas úteis .................................................................................. 56
Substituição do cartucho de toner ...................................... 57
Eliminação de obstruções de papel..................................... 58

* Para usuários de Mac OS, por favor consulte a pág.55

About the Manuals

Navigating the Menu and Text Input Method

Getting Started (This manual):
Read this manual first. This manual
describes the installation of the
machine, the settings, and a caution. Be
sure to read this manual before using
the machine.

Navigating the Menu
 MF Driver Installation Guide (Visit
the website):
This manual describes software
installation.
You can access
http://canon.com/oip-manual to
read the User’s Guide that describes
all functions of this machine.

 User’s Guide (Visit the website):
You can access
http://canon.com/oip-manual to
read the User’s Guide that describes
all functions of this machine.

Item selection or moving the cursor
among the menu items
Select an item with [▲] or [▼].
Proceed to the next hierarchy with
or [▶]. Return to the previous hierarchy
with or [◀].

Setting confirmation
Press
. However, when
appears on the display, select ,
and then press
.

Text Input Method
Changing entry mode
Press [▼] to select , and
then press
. You can also press to
change the entry mode.
Entry mode

Available text
Uppercase alphabetic letters and
symbols
Lowercase alphabetic letters and
symbols
Numbers

Entering text, symbols, and numbers
Enter with the numeric keys or .
Moving the cursor (Entering a space)
Move with [◀] or [▶]. Move the cursor
to the end of the text and press [▶] to
enter a space.
Deleting characters
Delete with . Pressing and holding
deletes all characters.

Entry mode:
<12>
1

(Not available)

(space) - . * # ! “ , ; : ^ ` _ = / | ‘
(Not available)
?$@%&+\˜()[]{}<>

Connecting the Power Cord and Turning ON the Power

Do not connect the USB cable at this time. Connect it when installing software.

Specifying the Initial Settings
Follow the instructions on the screen, set the language, region,
time zone, and date and time. For details on navigating the
menu and how to input the numbers, see “Navigating the
Menu and Text Input Method” ( P.8).
Language
Chinese (Simplified)
Chinese (Traditional
English
French

Current Time Set.
08/08/2014 12:52 AM

Check if your router has a button
Select from the following two methods depending on the
router (access point) that you are using.
●

There is a button.
You can easily setup if your router (access point)
has a button, and if the mark is on the router.
● There is no button.
If there is no button on your router (access point),
manually select your SSID and complete the settings.

Choosing the Method to Connect the
Machine
●

Connecting via a Wired LAN

You can connect the machine to a wired router. Use the LAN
cables to connect the machine to the wired router (access
point).

• If you are looking to install your new device via a
Wireless Network connection, you can find a video and
written guides with step-by-step instruction to assist
you through the process from the following URL:
http://www.usa.canon.com/WirelessHelp
Viewing these guides will ensure a smooth setup of the
device into your existing wireless environment.

Direct Connection

Connect a mobile device to the machine wirelessly and
directly without routing through a wireless LAN router (or
access point).
User’s Guide “Can Be Used Conveniently with a Mobile
Device” ▶ “Make Direct Connection (Access Point Mode)”

Connect the computer to the router by cable or wirelessly.
Make sure that there is an available port in the router to connect
the machine and the computer.
Have a LAN Cable of Category 5 twisted-pair cable or higher ready.
●

Connecting via a USB cable

You can connect the machine to the computer using a USB
cable.

Choosing the Method to Connect:
Via Wireless LAN or Other Method
Use wireless LAN to
connect to network?
(Can config. later.)
Yes

Make sure that the USB cable you use has the following
mark.
●

Connecting via a Wireless LAN

There is a button.
Start from step 4 of ”Push Button Mode” (P.11).
There is no button.
Start from step 4 of ”Setting the Access Point
Manually” (P.12).

Connect to the computer via a wired LAN
Proceed to “Connecting via a Wired LAN” (P.10).
Connect to the computer via a USB cable
Proceed to “Connecting via a USB Cable” (P.10).
Connect to the computer via a wireless LAN later
Proceed to “Connecting via a Wireless LAN” (P.10).

You can connect the machine to a wireless router*. Since it
is wirelessly connected, no LAN cables are needed.

* A wireless router (access point) that supports IEEE802.11b/g/n is
required.

Current Time Set.
Must rechg. battery
for 24 hours to save
time settings. After
turning main power

Connect the computer to the router by cable or wirelessly.

Connecting via a Wired LAN

Connecting via a USB Cable

Checking Before the Setup
Internet

Install the Driver and Software
Install the driver and software on the provided DVD-ROM.

See “For details on the installation procedures:” (P.13).
Proceed to “Setting a Paper Size and Type” (P.13).
LAN cable

NOTE
• If you connected the USB cable before installing, first
remove the USB cable and then re-install.
Are the computer and the router (or hub) properly
connected using a LAN cable?
For more information, see the instruction manual for the
network device you are using, or contact the networking
device manufacturer.
Have the network settings on the computer been
completed?
If the computer is not properly configured, you may not be
able to use the wired LAN connection even after completing
the following settings.

Connecting via a USB Cable
Follow the MF Driver Installation Guide to connect the USB
cable.

NOTE
• You cannot connect both the wired LAN and wireless
LAN at the same time. In addition, the machine is set to
the “Wired LAN” by default.
• When you connect to a network environment that is not
security protected, your personal information could be
disclosed to third parties. Please use caution.
• If you connect through a LAN in the office, contact your
network administrator.

Connecting via a Wired LAN

Connect the LAN cable.

Proceed to “Setting a Paper Size and Type” (P.13).

Connecting via a Wireless LAN
Checking Before the Setup

En
Wireless LAN Router
Internet

The IP address will be automatically configured in 2
minutes. If you want to set the IP address manually, see
the following items.
User’s Guide “Network” ▶ “Connecting to a Network” ▶
“Setting IP Addresses”

Install the driver and software using the provided
DVD-ROM.
See “For details on the installation procedures:” (P.13).
Proceed to “Setting a Paper Size and Type” (P.13).

Is the computer connected to the router (access point)
correctly by a LAN cable or wireless LAN?
For more information, see the instruction manual for the
network device you are using, or contact the networking
device manufacturer.
Have the network settings on the computer been
completed?
If the computer is not properly configured, you may not be
able to use the wireless LAN connection even after completing
the following settings.

NOTE
• You cannot connect both the wired LAN and wireless
LAN at the same time. In addition, the machine is set to
the “Wired LAN” by default.

Wireless LAN Settings
SSID Settings
WPS Push Button Mode
WPS PIN Code Mode
Power Save Mode

• When you connect to an unsecured network environment,
your personal information could be disclosed to third
parties. Please use caution.
• If you connect through a LAN in the office, contact your
network administrator.

Checking the Router
Select the connection method to the wireless LAN. Select from
the following two methods depending on the router (access
point) that you are using.
●

Select , and then press

Press and hold* the button until the lamp lights or
blinks.
You should press the WPS button within 2 minutes after
you select in step 6.
* The time that you should hold the button may vary depending
on the router you are using.

There is a button.

This machine supports WPS
(Wi-Fi Protected Setup). You
can easily set up if your router
(access point) has a button,
and if the mark
is on the
router.
If you are not sure whether or not your router supports WPS,
please see the manual included in the product, or contact the
product manufacturer.

Select , and then press
.

There is no button.

If there is no button on your
router (access point), you
may manually select SSID and
complete the settings. In this
case, you need to remember
SSID and network key of your
router (access point).
See “1 Check SSID or Network
Key for a Wireless LAN Router/
Access Point.” (P.12) to learn how to find out your SSID and
network key.

Wait approximately 2 minutes after the connection.
IP address is set during this period of time.
When an error message appears:
Press
to close the screen, check whether or not the
network key is correct, and then retry the settings. If the
access point cannot be detected even after retrying,
see the following.
User’s Guide “When an Error Message Appears”

When checking the network connection:
You can check if the machine is properly connected to
the network by using a computer that is connected to the
network.

To set up with the WPS PIN code method/To set up
manually:
User’s Guide “Connecting to a Wireless LAN”

User’s Guide “Viewing Network Settings”

To set IP address manually:

Setting Wireless LAN

User’s Guide “Connecting to a Wireless LAN”

Push Button Mode

Select , and then press

Select , and then press

If a screen appears asking whether to enable the wireless
LAN, select , and then press
.

Read the message that is displayed, and then press
.

Setting the Access Point Manually

Check SSID or Network Key for a Wireless LAN
Router/Access Point.
• Check the label on the Wireless LAN router.
• You can check the SSID or the network key using “Canon
MF / LBP Wireless Setup Assistant,” which is included in
the DVD-ROM supplied with the machine.

SSID
It is sometimes written as name of network, or name of
access point. If there are multiple SSIDs, please write down
all.

Network Key
It is sometimes written as PIN, WEP key, WPA/WPA2
passphrase, PSK or preshared key.

Select , and then press

Select , and then press

If a screen appears asking whether to enable the wireless
LAN, select , and then press
.

Read the message that is displayed, and then press
.

Select , and then press