SK1606 2 M Traverse Support Fax

User Manual: M-TraverseSupportFax

Open the PDF directly: View PDF PDF.
Page Count: 2

SK1606 Rev 2
M-TRAVERSE FAX COVER SHEET
Date: ______________________
Atten: Contrex Technical Support
Fax Number: 1-763-424-8734
From:
Name ______________________________________________ Ext___________________
Company _______________ Telephone #________________ Fax # _________________
We have ______ M-Traverse(s) that are used for: __________________________________
__________________________________________________________________________
__________________________________________________________________________
Serial Communication Hookup: _____Yes _____No
Brief Description of the Problem: ________________________________________________
__________________________________________________________________________
__________________________________________________________________________
__________________________________________________________________________
__________________________________________________________________________
__________________________________________________________________________
__________________________________________________________________________
__________________________________________________________________________
We are transmitting _____ pages, including:
this (two sided) Fax Cover Sheet,
a sketch of the system that the M-Traverse is integrated with.
Please turn the page to record any CPs that you have changed from the default value—>
Code# Description User
Record Code# Description User
Record
CP-01 Setpoint 1
CP-02 Traverse Length 1
CP-03 Setpoint 2
CP-04 Traverse Length 2
CP-05 Setpoint 3
CP-06 Traverse Length 3
CP-07 Setpoint 4
CP-08 Traverse Length 4
CP-09 Accel/Decel Length
CP-10 Dwell
CP-14 Control Mode
CP-15 Engineering Units
CP-16 Lead PPR Reel
CP-17 Foll Lines per EU
CP-18 PPR - Follower
CP-19 Max RPM - Follower
CP-23 High Speed Alarm
CP-24 Edge/Ctr Based Pf
CP-25 Change Activation
CP-26 Batch Format
CP-27 Batch Limit
CP-28 Batch Preact Distance
CP-29 Unipolar/Bipolar
CP-30 At-Home Band
CP-31 Home Offset
CP-32 Resume Enable
CP-35 Home Sync Polarity
CP-36 Fwd/Rev Limit Polarity
CP-37 Forward Limit Format
CP-60 Accel/Decel
CP-61 Jog Setpoint
CP-62 Direct Analog Cmd
CP-65 Gain ( P )
CP-66 Reset ( I )
CP-70 Device Address
CP-71 Baud Rate
CP-72 Character Format
CP-73 Control Mask
CP-79 Keypad Lockout Mask
CP-90 Output A Segment
CP-91 Output A Direction
CP-92 Output A Polarity
CP-93 Output B Segment
CP-94 Output B Direction
CP-95 Output B Polarity
Please record the Control Parameters that you have changed from the default value:
MV-55 Discrete Inputs C
MV-56 Discrete Outputs A
MV-57 Discrete Outputs B
MV-58 Invalid Profile
MV-59 Line Notch Counter
MV-74 Comm Error
MV-80 Lead Job Size
MV-81 Follower Job Size
MV-84 Follower Profile Length
MV-86 Process Ratio
MV-87 Profile Ratio
MV-89 Batch Count
MV-99 Software Code Revision
MV-00 Software Part Number
Code# Description Displayed
Code# Description Displayed
MV-40 Tach - Velocity
MV-41 Lead Frequency
MV-42 Feedback Frequency
MV-43 Lead Position
MV-44 Follower Position
MV-45 Follower Position EU
MV-46 Product Rate
MV-47 DAC Output
MV-48 Trim Output
MV-49 Position Error
MV-50 Keypad Errors
MV-51 Alarm Status
MV-52 Control State
MV-53 Discrete Inputs A
MV-54 Discrete Inputs B
Please record what the relevant Monitor Parameters display when the problem occurs:

Navigation menu