FlexScan S1701/S1721/S1731/S1901/S1911/S1921/S1931 User's Manual EIZO Flex Scan S1901 EN
User Manual: EIZO FlexScan S1901
Open the PDF directly: View PDF 
.
Page Count: 32
| Download | |
| Open PDF In Browser | View PDF |
PRECAUTIONS Chapter 1 Features and Overview 1-1 Features 1-2 Buttons and Indicators 1-3 Functions and Basic Operation Chapter 2 Settings and Adjustments 2-1 Utility Disk 2-2 Screen Adjustment 2-3 Color Adjustment 2-4 Off Timer Settings 2-5 Power Indicator/EIZO Logo Display Setting 2-6 Locking Buttons 2-7 Setting Adjustment menu Display 2-8 Viewing Information/Setting Language 2-9 Setting BrightRegulator 2-10 Resumption of Default Setting Chapter 3 Connecting Cables 3-1 Connecting Two PCs to the Monitor Chapter 4 Troubleshooting Chapter 5 Reference 5-1 Attaching an Arm (Option) 5-2 Power Saving Mode 5-3 Cleaning 5-4 Glossary 5-5 Preset Timing Important Please read this User’s Manual, Setup Manual (separate volume) and Specifications Sheet carefully to familiarize yourself with safe and effective usage. How to Setup Please read the Setup Manual (separate volume) Specifications Please read the Specifications Sheet on the CD-ROM. SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates a mandatory action that must be followed. Copyright© 2006-2010 EIZO NANAO CORPORATION All rights reserved. No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION. EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information confidential unless prior arrangements are made pursuant to EIZO NANAO CORPORATION’s receipt of said information. Although every effort has been made to ensure that this manual provides up-to-date information, please note that EIZO monitor specifications are subject to change without notice. Apple and Macintosh are registered trademarks of Apple Computer, Inc. VGA is a registered trademark of International Business Machines Corporation. VESA is a registered trademark of Video Electronics Standards Association. Windows is a registered trademark of Microsoft Corporation. EIZO, EIZO Logo, FlexScan and ScreenManager are registered trademarks of EIZO NANAO CORPORATION. All other trademarks are the properties of their respective owners. Product specification may vary with sales areas. Confirm the specification in the manual written in language of the region of purchase. PRECAUTIONS IMPORTANT • This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications. • To ensure personal safety and proper maintenance, please read carefully this section and the caution statements on the monitor. [Location of Caution Statement] (Example of height adjustment stand) WARNING If the unit begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediately and contact your dealer for advice. Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment damage. Do not open the cabinet or modify the unit. Opening the cabinet or modifying the unit may result in fire, electric shock, or burn. Refer all servicing to qualified service personnel. Do not attempt to service this product yourself as opening or removing covers may result in fire, electric shock, or equipment damage. Keep small objects or liquids away from the unit. Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet may result in fire, electric shock, or equipment damage. If an object or liquid falls/spills into the cabinet, unplug the unit immediately. Have the unit checked by a qualified service engineer before using it again. PRECAUTIONS WARNING Place the unit at the strong and stable place. A unit placed on an inadequate surface may fall and result in injury or equipment damage. If the unit falls, disconnect the power immediately and ask your dealer for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or electric shock. Set the unit in an appropriate location. Not doing so may result in fire, electric shock, or equipment damage. • Do not place outdoors. • Do not place in the transportation system (ship, aircraft, trains, automobiles, etc.) • Do not place in a dusty or humid environment. • Do not place in a location where the steam comes directly on the screen. • Do not place near heat generating devices or a humidifier. To avoid danger of suffocation, keep the plastic packing bags away from babies and children. Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord. Not doing so may result in fire or electric shock. To disconnect the power cord, grasp the plug firmly and pull. Tugging on the cord may damage and result in fire or electric shock. The equipment must be connected to a grounded main outlet. Failure to do so may result in fire or electric shock. Use the correct voltage. • The unit is designed for use with a specific voltage only. Connection to another voltage than specified in this User’s Manual may cause fire, electric shock, or equipment damage. • Do not overload your power circuit, as this may result in fire or electric shock. PRECAUTIONS WARNING Handle the power cord with care. • Do not place the cord underneath the unit or other heavy objects. • Do not pull on or tie the cord. If the power cord becomes damaged, stop using it. Use of a damaged cord may result in fire or electric shock. Never touch the plug and power cord if it begins to thunder. Touching them may result in electric shock. When attaching an arm stand, please refer to the user’s manual of the arm stand and install the unit securely. Not doing so may cause the unit to become unattached, which may result in injury or equipment damage. When the unit is dropped, please ask your dealer for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or electric shock. When reattaching the tilt stand, please use the same screws and tighten them securely. Do not touch a damaged LCD panel directly with bare hands. The liquid crystal that may leak from the panel is poisonous if it enters the eyes or mouth. If any part of the skin or body comes in direct contact with the panel, please wash thoroughly. If some physical symptoms result, please consult your doctor. Follow local regulation or laws for safe disposal. The backlight of the LCD panel contains mercury. PRECAUTIONS CAUTION Handle with care when carrying the unit. Disconnect the power cord and cables when moving the unit. Moving the unit with the cord attached is dangerous. It may result in injury. When handling the unit, grip the bottom of the unit firmly with both hands ensuring the panel faces outward before lifting. Dropping the unit may result in injury or equipment damage. Do not block the ventilation slots on the cabinet. • Do not place any objects on the ventilation slots. • Do not install the unit in a closed space. • Do not use the unit laid down or upside down. Blocking the ventilation slots prevents proper airflow and may result in fire, electric shock, or equipment damage. Do not touch the plug with wet hands. Doing so may result in electrical shock. Use an easily accessible power outlet. This will ensure that you can disconnect the power quickly in case of a problem. Periodically clean the area around the plug. Dust, water, or oil on the plug may result in fire. Unplug the unit before cleaning it. Cleaning the unit while it is plugged into a power outlet may result in electric shock. If you plan to leave the unit unused for an extended period, disconnect the power cord from the wall socket after turning off the power switch for the safety and the power conservation. PRECAUTIONS LCD Panel In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in lower brightness is recommended. The LCD panel is manufactured using high-precision technology. However, note that the appearance of any missing pixels or lit pixels does not indicate damage to the LCD monitor. Percentage of effective pixels: 99.9994% or higher. The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please contact your dealer. Do not press on the panel or edge of the frame strongly, as this may result in damage to the screen. There will be prints left on the screen if the pressed image is dark or black. If pressure is repeatedly applied to the screen, it may deteriorate or damage your LCD panel. Leave the screen white to decrease the prints. Do not scratch or press on the panel with any sharp objects, such as a pencil or pen as this may result in damage to the panel. Do not attempt to brush with tissues as this may scratch the LCD panel. When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation may occur inside and outside the monitor. In that case, do not turn the monitor on and wait until dew condensation disappears, otherwise it may cause damage to the monitor. To use the monitor comfortably An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor according to the environmental conditions. Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour. PRECAUTIONS CONTENTS PRECAUTIONS....................................................... 1 2-6 Locking Buttons............................................. 17 ● To lock operation [Adjustment Lock].................. 17 LCD Panel.................................................................... 5 2-7 Chapter 1 Features and Overview...................... 7 1-1 Features............................................................. 7 1-2 Buttons and Indicators..................................... 7 1-3 Functions and Basic Operation....................... 8 Chapter 2 Settings and Adjustments............... 10 2-1 Setting Adjustment menu Display................. 17 ● To update menu settings [Menu Position]......... 17 To use the monitor comfortably................................ 5 2-8 Viewing Information/Setting Language........ 18 ● To check viewing information, usage time, etc. 18 ● To set a language to be displayed [Language].. 18 2-9 Setting BrightRegulator................................. 18 ● [BrightRegulator] to set “Enable” or “Disable” for BrightRegulator.................................................. 18 2-10 Resumption of Default Setting...................... 18 ● To reset color adjustment [Reset]...................... 18 ● To reset all settings [Reset]............................... 18 Utility Disk....................................................... 10 ● Disk contents and software overview................ 10 ● To use ScreenManager Pro for LCD (USB model Chapter 3 Connecting Cables........................... 19 of S1721/S1731/S1921/S1931)........................ 10 3-1 2-2 Connecting Two PCs to the Monitor............. 19 Screen Adjustment..........................................11 Digital Input............................................................11 Chapter 4 Troubleshooting................................ 20 Analog Input..........................................................11 2-3 Color Adjustment............................................ 14 Simple adjustment [FineContrast mode]........... 14 ● FineContrast Mode............................................ 14 Advanced Adjustments [Adjustment menu]...... 15 ● To select an appropriate mode for images........ 15 ● To set/adjust color............................................. 15 2-4 Off Timer Settings........................................... 16 ● To set monitor power-off time [Off Timer].......... 16 2-5 Power Indicator/EIZO Logo Display Setting 16 ● To turn off the Power indicator while a screen is displayed [Power Indicator Setting]................... 16 ● To display EIZO logo [EIZO Logo Hiding Function]............................ 16 CONTENTS Chapter 5 Reference.......................................... 22 5-1 Attaching an Arm (Option)............................. 22 5-2 Power Saving Mode........................................ 23 5-3 Cleaning........................................................... 23 5-4 Glossary.......................................................... 24 5-5 Preset Timing.................................................. 25 Chapter 1 Features and Overview Thank you very much for choosing an EIZO color LCD monitor. 1-1 Features • Dual-input compliant (DVI-D and D-sub mini 15-pin connectors) • DVI digital input (TMDS) compliant • Horizontal scan frequency: Analog: 24.8 - 80 kHz, Digital: 31 - 64 kHz • Vertical scan frequency: Analog: 50 - 75 Hz Digital: 59 - 61 Hz (VGA text: 69 - 71 Hz) Resolution: 1280 dots × 1024 lines • Stereo speakers*1 • BrightRegulator function incorporated • FineContrast mode to allow the best mode for screen display • Ultra slim bezel 1-2 NOTE • The stand of the unit can be replaced with an arm or another stand. (Refer to “5-1 Attaching an Arm” on page 22.) Buttons and Indicators Adjustment menu (*ScreenManager ® ) Buttons *1 *2 1. 2a. 2b. 3a. 3b. 4. 5. 6. 7. 8. Sensor (BrightRegulator) Volume control button [turn down]*1 Brightness control button [turn down]*2 Volume control button [turn up]*1 Brightness control button [turn up]*2 Input signal selection button Control buttons (Left, Right) Enter button Power button Power indicator Indicator status Operation status Blue The screen is displayed Orange Power saving Off Power off * ScreenManager ® is an EIZO’s nickname of the Adjustment menu. NOTE • When “Off Timer” set, the power indicator blinks 15 minutes before the set time. (Refer to “To set monitor power-off time” on page 16.) *1 Speaker applied model *2 Speaker non-applied model Chapter 1 Features and Overview 1-3 Functions and Basic Operation To adjust the screen and color Adjustment menu (Refer to page 9 for operation) (for analog signal input only) 1 Screen Adjustment Page 11 (Automatic Adjustment) ● [Screen] to adjust flickering and position………………………………… see page 11 ● [Range] to adjust color gradation automatically… ……………………… see page 13 Adjustment menu (Refer to page 9 for operation) (for analog signal input only) Adjustment menu (Refer to page 9 for operation) Page 14 Color Adjustment Advanced Adjustment [Adjustment menu] ● “Brightness,” “Temperature,” and “Gain” can be set for each mode (Custom/sRGB/Text). Settable functions vary with the display mode. Resuming the default settings ● Reset color adjustment [Reset]……… see page 18 2 Screen Adjustment (Advanced Adjustment) [Adjustment menu] ● [Clock] to remove vertical bars… …… see page 12 ● [Phase] to remove horizontal flickering and blur/distortion… ………………… see page 12 ● [Position] to correct screen position [Hor. Position]… ……………………… see page 12 [Ver. Position]… ……………………… see page 12 Shortcut button operation Brightness Adjustment*1 Press or Press or Page 15 to adjust brightness. Brightness Adjustment*2 Page 15 to adjust brightness. Volume Adjustment*1 Press or to adjust volume. *1 :Speaker applied model *2 :Speaker non-applied model Chapter 1 Features and Overview Page 11 To make useful settings/adjustments Adjustment menu (Refer to below for operation) Information Page 18 ● [Information] to check displayed input signals, monitor information, usage time, etc. Adjustment menu (Refer to below for operation) Language Page 18 ● [Information] to check settings, usage time, etc. Set the off timer ● [Off Timer] to set the monitor power off time … ……………………………………… see page 16 ● [Language] to select Adjustment menu language. Adjustment menu settings ● [Menu Position] to change Adjustment menu settings………………………………… see page 17 EIZO Logo Display Setting Power Indicator Setting ● [Power Indicator Setting] to turn off the indicator while the screen is displayed………… see page 16 Page 16 ● [EIZO Logo Appearing Function] to display or not to display the EIZO logo Locking Adjustment BrightRegulator setting ● [BrightRegulator] to set Enable/ Disable of BrightRegulator… …………………… see page 18 Page 17 ● [Adjustment Lock] to lock operation of the monitor Connecting Cables Resume the factory default settings ● [Reset] to reset all settings…………… see page 18 Page 19 ● Connecting Two PCs to the Monitor Basic operation of Adjustment menu [Displaying Adjustment menu and selecting function] (1) (2) (3) (4) Press . The main menu appears. Select a function with or , and press . The sub menu appears. Select a function with or , and press . The adjustment/setting menu appears. Adjust the selected item with or , and press . The setting is saved. [Exiting Adjustment menu] (1) Choose (2) Choosefrom the sub menu and press from the main menu and press . . NOTE • The Adjustment menu can also be exited by pressing twice quickly. Chapter 1 Features and Overview Chapter 2 Settings and Adjustments 2-1 Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and the overview of the application software programs. ● Disk contents and software overview The disk includes a monitor information file, application software programs for adjustment, and User’s Manual. Refer to “readme.txt” or the “Readme” file on the disk for software startup procedures or file access procedures. Item Overview A “readme.txt” or “Readme” file For Windows For Macintosh ○ ○ Monitor information file (INF file) Available for setting the best resolution and refresh rate for the monitor. ○ − Color Profiles (ICC Profiles) Color profiles ○ ○ Screen Adjustment Program Available for easy adjustments of the monitor screen following adjustment patterns and procedures on the screen. ○ ○ A utility software program to control monitor adjustments from a PC using its mouse and keyboard. (A PC must be connected to the monitor with the supplied USB cable.) Refer to the description later. ○ − ScreenManager Pro for LCD (for Windows) application software (USB model of S1721/S1731/S1921/ S1931) User’s Manual of this monitor (PDF file), Specifications Sheet (PDF file) ● To use ScreenManager Pro for LCD (USB model of S1721/S1731/S1921/S1931) For the installation and use of ScreenManager Pro for LCD, refer to its User’s Manual on the disk. To adjust the monitor using ScreenManager Pro for LCD, connect a PC to the monitor with the supplied USB cable. [Connection] (1) Connect the USB port (downstream) of a USB compatible PC (or other USB hub) and the monitor’s USB port (upstream) with the supplied USB cable. (2) The USB function is set up automatically upon connection of the USB cable. Upstream 10 Chapter 2 Settings and Adjustments 2-2 Screen Adjustment Digital Input Attention • Wait 30 minutes or more from monitor power on before starting adjustments. When digital signals are input, images are displayed correctly based on the preset data of the monitor. Analog Input The monitor screen adjustment is used to suppress flickering of the screen or adjust screen position and screen size correctly according to the PC to be used. To use the monitor comfortably, adjust the screen when the monitor is set up for the first time or when the settings of the PC in use are updated. NOTE • Use “Screen Adjustment Program” on the supplied EIZO LCD Utility Disk. The auto-adjustment function works in the following cases: • When a signal is input into the monitor for the first time • When a signal is input into the monitor for the first time after the resolution or refresh rate of input signals is changed Attention [Adjustment Procedure] Automatic Adjustment 1 To adjust screen automatically [Screen] (1) Choose from the menu, and press . (2) Choose , and Press . (3) Flickering, screen position, and screen size are corrected by the autoadjustment function. • This function works correctly when an image is fully displayed over the Windows or Macintosh display area. It does not work properly when an image is displayed only on a part of the screen (DOS prompt window, for example) or when a black background (wallpaper, etc.) is in use. • This function does not work correctly with some graphics boards. • “Auto in Progress” appears on the screen during auto adjustment. If satisfactory adjustment cannot be obtained with the autoadjustment function, perform the adjustment following the procedure below. When the screen is displayed correctly, go to step 4 “Range Adjustment”. NOTE Advanced Adjustment 2 Run the Screen Adjustment Program. Load the EIZO LCD Utility Disk on the PC, and start the Screen Adjustment Program compatible with the PC in use. After the program starts up, perform the adjustment in step 3 following the instructions of the program. • For how to start the Screen Adjustment Program, refer to “readme.txt” or the “Readme” file. When you are using a Windows PC, you can run the program directly from the start menu of the disk. • If no adjustment program is available for your PC, display a checkerboard pattern on the screen (see below) and go to the following steps. Chapter 2 Settings and Adjustments 11 3 NOTE Perform advanced adjustments for the following using the menu of the Adjustment menu. ● To eliminate vertical bars [Clock] (1) Choose from the menu, and press The menu appears. (2) Adjust the clock with or , and press The adjustment is completed. . • Press the control button slowly so as not to miss the adjustment point. • When blurring, flickering or bars appear on the screen after adjustment, proceed to [Phase] to remove flickering or blurring. . Attention • Flickering or blurring may not be eliminated depending on your PC or graphics board. NOTE ● To remove flickering or blurring [Phase] (1) Choose from the menu, and press The menu appears. (2) Adjust the phase with or , and press The adjustment is completed. . . ● To correct screen position [Horizontal Position], [Vertical Position] Since the number of pixels and the pixel positions are fixed on the LCD monitor, only one position is provided to display images correctly. The position adjustment is made to shift an image to the correct position. and or (1) Choose menu, and press . from the The or menu appears. (2) Adjust the position with or to display the image properly in the display area of the monitor. 12 Chapter 2 Settings and Adjustments • When vertical bars appear on the screen after adjustment, go back to “To eliminate vertical bars [Clock].” (Clock → Phase → Position) 4 Adjust the signal output range ● To adjust color gradation automatically [Range Adjustment] Every color gradation (0 to 255) can be displayed by adjusting the signal output level. from the menu, and (1) Choose . press (2) Choose , and press . (3) Color gradation is adjusted correctly by the auto-adjustment function. The output range is adjusted automatically to display images with the maximum color gradation. All the adjustments using the “Screen Adjustment Program” are completed. Chapter 2 Settings and Adjustments 13 2-3 Color Adjustment Simple adjustment [FineContrast mode] This function allows you to select the best display mode for monitor brightness, etc. from the menu. (1) Choose (2) Choose [Custom], [sRGB] or [Text] with or , and press . ● FineContrast Mode An appropriate display mode is selectable out of three modes. Mode Purpose Custom Available for making desired setting. sRGB Suitable for color matching with sRGB compatible peripherals. Text Suitable for displaying texts for word processing or spreadsheets. 14 Chapter 2 Settings and Adjustments Attention Advanced Adjustments [Adjustment menu] Independent setting and saving of color adjustment are available for each FineContrast mode. ● To select an appropriate mode for images ü: Adjustment/setting available Icon −: Factory setting Function FineContrast mode Custom sRGB Text Brightness ü ü ü Temperature ü − ü Gain ü − − Reset ü − ü Menu Brightness Description Adjustment range To adjust the full screen brightness as desired 0 to 100% NOTE • You can also adjust the brightness by pressing or • You can also adjust the brightness by pressing or Temperature To select a color temperature * 1. • Perform [Range Adjustment] before starting color adjustment for analog input signals. Refer to “To adjust color gradation automatically” on page 13. • The FineContrast mode cannot be changed during color adjustment. Set the FineContrast mode in advance on the color mode screen. • Wait 30 minutes or more from monitor power on before starting the color adjustment. • Choose [Reset] from the Color menu to revert to the default setting (factory setting) of the color tone of the FineContrast mode selected. • The same image may be seen in different colors on multiple monitors due to their monitor-specific characteristics. Make fine color adjustment visually when matching colors on multiple monitors. • Adjustable functions vary depending on the type of FineContrast mode. * 2. “OFF,” “5000K,” “6500K,” or “9300K” NOTE • The values shown in the Kelvin (K) are available only as reference. • While color temperature is adjusted, is adjusted automatically according to the color temperature. • When is set, color temperature setting is disabled, and is set to “OFF”. Gain To adjust red, green, and 0 to 100% blue to a desired color tone Adjust the respective brightness of respectively red/green/blue to make a desired color tone. Display an image with white or gray background for adjustment. NOTE • Values shown in percentage are available only as reference. • The setting invalidates this setting. The setting varies with color temperature. Reset To reset the color settings of the selected FineContrast mode to the default settings. ● To set/adjust color (1) Choose from the Adjustment menu, and press . (2) Select a desired function from the menu, and press The selected function menu appears. (3) Adjust the selected item with The adjustment is completed. or , and press . . *1 :Speaker applied model *2 :Speaker non-applied model Chapter 2 Settings and Adjustments 15 2-4 Off Timer Settings ● To set monitor power-off time [Off Timer] Attention This function allows the monitor to automatically turn off after a specified time has passed. This function serves to reduce afterimages caused when the monitor screen is left on for a long time period without use. Use this function when an image is displayed throughout the day. • The Off Timer functions even in the power saving mode, but the advance notice is disabled. The monitor power is turned off without advance notice. [Off Timer System] Timer ON time (1H - 23H) Monitor Operating Last 15 min. in “ON time” Advance “ON time” expired Power Indicator Blue Notice*1 Flashing blue Power Off Off *1 When is pressed during the advance notice period, the monitor continues to operate for additional 90 minutes. Extension of operation time can be set without limitation. [Procedure] (1) Choose from the Adjustment menu, and press . (2) Choose from the menu, and press The menu appears. (3) Select “Enable” with or , and press (4) Set a monitor ON time (1 to 23 hours) with . . or , and press The Off Timer setting is completed. . [Resumption Procedure] . Press 2-5 Power Indicator/EIZO Logo Display Setting ● To turn off the Power indicator while a screen is displayed [Power Indicator Setting] NOTE • The Power indicator lights up at power on with the default setting. This function enables to turn off the Power indicator (blue) while a screen is displayed. . (1) Choose from the Adjustment menu, and press (2) Choose from the menu, and press The menu appears. (3) Select “Disable” with or , and press The Power Indicator setting is completed. . . ● To display EIZO logo [EIZO Logo Hiding Function] When this unit is turned on, the EIZO logo appears at the center of the screen. Selection to display or not to display the logo is available with this function. [Procedure] (1) Press (2) Press to power off the unit. again while pressing . The EIZO logo does not appear on the screen. [Resetting] (1) Press (2) Press to power off the unit. again while pressing The logo appears again. 16 . Chapter 2 Settings and Adjustments NOTE • The logo appears with the default setting. 2-6 Locking Buttons ● To lock operation [Adjustment Lock] This function locks the buttons to retain the status adjusted or set once. Buttons that can be locked • Buttons that cannot be locked • (Power button) • (Input signal selection button) • (Volume control button) or control button)*1 (Enter button) Adjustments/settings using Adjustment menu • (Brightness (Brightness control button)*2 [Procedure] (1) Press (2) Press to turn off the unit. again while pressing . The screen is displayed with the adjustment lock. [Unlocking] (1) Press (2) Press to turn off the unit. again while pressing . The screen is displayed with the adjustment lock released. 2-7 NOTE Setting Adjustment menu Display • Five positions (center/ upper right/ lower right/ upper left/ lower left) can be selected. ● To update menu settings [Menu Position] Menu Position Adjust the menu position using the following procedure. . (1) Choose from the Adjustment menu, and press (2) Choose
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Encryption : Standard V1.2 (40-bit) User Access : Print, Copy, Fill forms, Extract, Assemble, Print high-res Page Count : 32 Page Mode : UseOutlines XMP Toolkit : XMP toolkit 2.9.1-14, framework 1.6 About : uuid:b2957a30-e71e-4025-a049-3b2d84007417 Light Source : Unknown Startup Profile : Print Producer : Adobe PDF Library 7.0 Trapped : False Create Date : 2010:04:12 16:35:54+09:00 Modify Date : 2010:04:12 16:58:37+09:00 Metadata Date : 2010:04:12 16:58:37+09:00 Creator Tool : Adobe InDesign CS2_J (4.0) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 8656 bytes, use -b option to extract) Instance ID : uuid:4022e156-d8ee-4fda-beed-999cbd906291 Version ID : 1 Rendition Class : proof:pdf Document ID : adobe:docid:indd:8ca6066f-340f-11db-97e3-a6d0ace0b56e Derived From Instance ID : 8ca6066e-340f-11db-97e3-a6d0ace0b56e Derived From Document ID : adobe:docid:indd:8ca6066d-340f-11db-97e3-a6d0ace0b56e Derived From Version ID : 1 Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 179.29, 72.00, 271.18, 72.00, 179.29, 72.00, 179.29, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 95.95, 72.00, 95.95, 72.00, 72.00, 179.29, 179.29, 72.00, 72.00, 179.25, 72.00, 101.60, 72.00, 72.00, 72.00, 101.60, 72.00, 72.00, 72.00, 72.00, 72.00, 107.24, 72.00, 72.00, 72.00, 72.00, 72.00, 112.88, 112.88, 72.00, 72.00, 72.00, 72.00, 84.66, 72.00, 72.00, 101.60, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 101.60, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 101.60, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 107.24, 72.00, 72.00, 72.00, 72.00, 101.60, 72.00, 72.00, 101.60, 72.00, 72.00, 72.00, 72.00, 72.00, 101.60, 72.00, 72.00, 72.00, 72.00, 72.00, 101.60, 72.00, 72.00, 72.00, 72.00, 72.00, 101.60, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 179.29, 179.29, 72.00, 112.88, 112.88, 72.00, 101.60, 72.00, 107.24, 95.95, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 179.29, 72.00, 271.18, 72.00, 179.29, 72.00, 179.29, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 95.95, 72.00, 95.95, 72.00, 72.00, 179.29, 179.29, 72.00, 72.00, 179.25, 72.00, 101.60, 72.00, 72.00, 72.00, 101.60, 72.00, 72.00, 72.00, 72.00, 72.00, 107.24, 72.00, 72.00, 72.00, 72.00, 72.00, 112.88, 112.88, 72.00, 72.00, 72.00, 72.00, 84.66, 72.00, 72.00, 101.60, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 101.60, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 101.60, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 107.24, 72.00, 72.00, 72.00, 72.00, 101.60, 72.00, 72.00, 101.60, 72.00, 72.00, 72.00, 72.00, 72.00, 101.60, 72.00, 72.00, 72.00, 72.00, 72.00, 101.60, 72.00, 72.00, 72.00, 72.00, 72.00, 101.60, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 179.29, 179.29, 72.00, 112.88, 112.88, 72.00, 101.60, 72.00, 107.24, 95.95, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:BACA0A407AF6DD1190CEDE7D881A1D8E, uuid:de5b51c9-fdbb-43bf-bc8b-64ee12e216dd, uuid:7dbc312f-b5ac-4ecd-a142-db56760dd7e6, uuid:fb5c4d4c-ccb8-4baf-b72a-adcbaedbecae, uuid:69422b11-ed71-4227-92a2-2ea36d9cd0f0, uuid:d6f91052-de2e-4c25-a345-e6462713041a, uuid:4f36e4cc-5543-4dbc-b967-51c4436f6581, uuid:a62743ef-8f06-4038-8cb1-794c6229fb7b, uuid:4faef872-f5e7-4201-a7fb-659d5da4a509, uuid:20014bba-6ed2-4ea8-9ac5-aeb252639a5e, uuid:5f318c3d-e948-4ac1-825e-ec86d8490553, uuid:cceca020-eb25-48f3-968b-8a1cf844d991, uuid:20014bba-6ed2-4ea8-9ac5-aeb252639a5e, uuid:fe7612bf-a544-436c-a264-8a22fb202e67, uuid:1d21d155-442e-42d1-b78b-0a1a49f1f538, uuid:ad119fa6-a746-4fbf-a29b-f8751525c485, uuid:c9fe535e-f047-44ae-9587-88d25f53ec43, uuid:5f318c3d-e948-4ac1-825e-ec86d8490553, uuid:cceca020-eb25-48f3-968b-8a1cf844d991, uuid:5f318c3d-e948-4ac1-825e-ec86d8490553, uuid:cceca020-eb25-48f3-968b-8a1cf844d991, uuid:b5ff0fbf-4437-4f38-845b-2bc58f9c27d8, uuid:bf1be398-82bb-4473-b396-280fc0030691, uuid:9a6516d8-8e21-4c47-b487-a17be4593ed7, uuid:82c9554c-e0b4-4f8f-bcd8-954e2380fce2, uuid:52061d39-ea86-42d0-9802-35e7416f2a84, uuid:59caabaf-3aa2-40bf-8e8f-b368d251a271, uuid:fa13fd91-e8f2-4cc5-bdc6-60ce9a609b35 Manifest Reference Document ID : uuid:B9CA0A407AF6DD1190CEDE7D881A1D8E, uuid:bc99b16a-8b46-4d0f-ae7c-771219c7a165, uuid:7fb83241-1710-44b2-91e1-5414027bc2ff, uuid:7f4224df-081d-4d0e-8f9d-73a8282bd67b, uuid:5f7998b1-8d3c-49e9-8464-424a3dac7569, uuid:43cacd19-ea12-498f-88f7-74dbef49a0a5, uuid:C457F245F08EDA11B2D6E42DB0FD9A96, uuid:97d72f3a-415c-4994-83fd-d2605f6d3e42, uuid:73bcfb4b-7bff-4e94-8844-602c07915737, uuid:EB0F8FCEC56BDA11BACCB9814B23CB8A, uuid:438FA3A8F08EDA11B2D6E42DB0FD9A96, uuid:97d72f3a-415c-4994-83fd-d2605f6d3e42, uuid:BBE70AEDEF8EDA11B2D6E42DB0FD9A96, uuid:9602EAE4F08EDA11B2D6E42DB0FD9A96, uuid:e7ea988c-26f6-41e2-a4a4-8976c36d195e, uuid:2f0014d5-4d6a-4c1a-a5a2-666564d3cfe3, uuid:97d72f3a-415c-4994-83fd-d2605f6d3e42, uuid:5bd3c6e0-e590-42af-806a-22c0e9d6dcd1, uuid:c40ac3af-1ee6-4349-bfb4-91eba72dd859, uuid:dad6cd20-f047-43e2-9ea3-1648ff210cc0, uuid:71B4EB4DF18EDA11B2D6E42DB0FD9A96, uuid:6FB4EB4DF18EDA11B2D6E42DB0FD9A96, uuid:73acfc3a-145e-46b5-840a-70bffe9ff580, uuid:F7F111B77B76DA118953BCA2A32C9FF9, adobe:docid:photoshop:65ea3d97-7049-11da-bd50-a16116730a41, uuid:DBF987820276DA11A38DCD501D0A0DF5, adobe:docid:photoshop:33fbf8e3-92e7-11da-9fba-e8ae73232d71, uuid:f83b0613-c599-4c1f-a7cc-2d9e353f4397, adobe:docid:photoshop:416412c3-704a-11da-bd50-a16116730a41, uuid:46672495-ef1d-4b74-a8a3-54993535faef, adobe:docid:photoshop:416412ca-704a-11da-bd50-a16116730a41, uuid:7157a398-c687-4ba3-9c68-aaf926290d09, uuid:80cf6150-142e-4bb9-85e5-2af090ecd000, uuid:b9311367-7b0e-4718-bab5-4cec3478cdf2, uuid:85fbea54-d665-4bae-88db-20e1224d1e53, uuid:433fea40-35f3-436a-91b6-8827196b6531, adobe:docid:photoshop:fd815180-c8a2-11da-94ac-8cebdf16f98a, uuid:7F18BB8A606DDA118A38F3A4CC2EC49E, uuid:8318BB8A606DDA118A38F3A4CC2EC49E, uuid:DBF987820276DA11A38DCD501D0A0DF5, uuid:0d67db9e-ba32-42f0-9f89-e0fe0661d194, uuid:b3660377-75d2-4c01-92e8-97182298d8c1, uuid:e280d4c1-eed6-4f13-89cf-262087cd9bdb, uuid:a90547fa-88d7-46f7-9bbe-5e27c8a1a5e8, uuid:55dd82fc-b31b-4a8d-bc10-8346205a2221, uuid:fc9b8d72-2175-45b3-9be4-b4af8c6e8bdb, uuid:312c185e-261a-47ba-b5d4-e6d2e5bf03fe, uuid:7bf096e7-aba4-4743-a8c6-41ef98619781, uuid:21a1023e-5db8-4c4c-b278-748470349599, uuid:a148271b-122c-4e4e-89f5-c52b5b79ce08, adobe:docid:photoshop:bdfa8e05-7dbc-11da-b02e-8632134d31dc, uuid:11924fc0-5c46-416b-a99c-e923ae9d3d31, adobe:docid:photoshop:bdfa8e05-7dbc-11da-b02e-8632134d31dc, uuid:d520647d-2a17-49be-ad91-f637fe961cca, uuid:7bc07c57-672b-411b-8943-3f292c478d4a, adobe:docid:photoshop:36c8f194-704c-11da-bd50-a16116730a41, adobe:docid:photoshop:d1e3df44-704b-11da-bd50-a16116730a41, uuid:80327af7-4b4d-4a98-ac3e-41c51bcd39ff, uuid:ae185481-0185-4347-83a6-c85b03b25ec9, adobe:docid:photoshop:d1e3df48-704b-11da-bd50-a16116730a41, uuid:CEB01FCAC46BDA11BACCB9814B23CB8A, adobe:docid:photoshop:27047625-7db4-11da-9207-a8d475ac4fe6, uuid:0755bd0d-ca0b-4252-884b-3b562f1348e7, uuid:a865b852-32fb-4d0d-8f2d-6ff411dddbf3, uuid:c64b1559-119e-4db4-9039-a6b76ed7c1d4, adobe:docid:photoshop:c3c874f4-7db5-11da-8c54-ad85c0cc5427, uuid:0be26e38-f05e-46a2-8780-5d4afb695537, uuid:456afade-87b9-4111-9043-0cf5a251e6c0, uuid:831725bd-d6e6-48fe-8d8a-85cd1bdd6e8e, uuid:39b5591d-5a8e-4851-8e00-321de7110684, uuid:6838DBD6018FDA11B346D9CC7BF01B87, adobe:docid:photoshop:6faf6447-7db5-11da-8c54-ad85c0cc5427, uuid:147c97e9-d14e-4c68-8e1b-9931be5fa9ae, uuid:f9889c5e-8f18-4373-b4cf-36d6ab5be5e2, uuid:2bfebd45-1b2c-4348-b837-e627f51bfcce, uuid:e3103d46-8775-4bbf-84c9-98a340235fee, uuid:7B13051B028FDA11B346D9CC7BF01B87, adobe:docid:photoshop:6faf6443-7db5-11da-8c54-ad85c0cc5427, adobe:docid:photoshop:c3c874f0-7db5-11da-8c54-ad85c0cc5427, uuid:4e4c8f7f-ddfb-494e-89bf-db74bee4fba1, uuid:a348a938-45db-41e6-bee8-00ea35e0cc7e, uuid:e9fad9cf-0671-4e50-9094-42318a69fbfd, uuid:7913051B028FDA11B346D9CC7BF01B87, adobe:docid:photoshop:1da1f6c6-7e54-11da-84c3-bf64f29710ef, uuid:de1f4336-abc1-4faa-9c7c-222d0a9de86c, uuid:26fdbfd9-1d6b-4300-ab0c-a1f6680bacbb, adobe:docid:photoshop:1da1f6c2-7e54-11da-84c3-bf64f29710ef, uuid:ce393339-0dc4-41be-bba1-0fc213500bb7, uuid:3b10a0ae-5250-4934-96f4-b9a283b4d43d, uuid:599efbee-570d-4a54-9a48-301c03700f56, adobe:docid:photoshop:03f074f7-ea19-11d9-8532-eb557211b4f5, adobe:docid:photoshop:f598cf93-ea18-11d9-8532-eb557211b4f5, adobe:docid:photoshop:fd409c90-ea18-11d9-8532-eb557211b4f5, adobe:docid:photoshop:e8b77b59-ea18-11d9-8532-eb557211b4f5, adobe:docid:photoshop:03f074f7-ea19-11d9-8532-eb557211b4f5, uuid:fc1e5e9e-2b64-483b-9ead-b5b3220bd4f8, uuid:13aab572-aed2-4560-b182-63a62db1ff69, uuid:7F18BB8A606DDA118A38F3A4CC2EC49E, uuid:8318BB8A606DDA118A38F3A4CC2EC49E, adobe:docid:photoshop:f598cf93-ea18-11d9-8532-eb557211b4f5, adobe:docid:photoshop:fd409c90-ea18-11d9-8532-eb557211b4f5, adobe:docid:photoshop:e8b77b59-ea18-11d9-8532-eb557211b4f5, uuid:e1b57af9-9f46-43f8-b120-39ebb9678675, uuid:ea10037c-9bda-4754-93df-d3d6a4cd381c, uuid:8f48a22e-59ac-4914-bbf9-656a5a3603bc, uuid:1cdeb60f-1460-4b11-9e4e-81d3669a676f, uuid:7731e196-211a-49dd-a8a0-062a2a44c2d5, uuid:bf2c18af-4cbe-47b1-9f66-6908666462df, uuid:0389c04c-b282-4205-b2c1-d0c14a5d95ba, adobe:docid:photoshop:9672b6fe-7da3-11da-b26a-867c399c92a1, uuid:5ef8d729-c43d-4b92-bc8b-ea2b7c86e8a5, uuid:b85debb3-ed6b-4a98-a29a-4bd7268d3443, uuid:360201a4-01b4-44f5-9ce0-92781ba840bc, uuid:3ec46569-cfd9-4150-a0ce-e389a5ffa11b, uuid:b4f9e681-20f9-4de0-b181-957ca40bae8a, uuid:2aef8328-e681-41c6-940d-75480b5afd45, uuid:72e5190f-dbe4-45eb-b455-7a8b86bb133f, uuid:510b82fc-fa01-4840-8a7b-d38c6be58802, uuid:ff541914-3487-490e-bd52-9d0556d90ac6, adobe:docid:photoshop:fb5a3114-7db0-11da-a01e-af3084aead60, uuid:65904056-cb07-400e-a1b3-ef2acf30fad4, uuid:6e4714ee-75c2-4c45-89ee-15df5847f272, uuid:95033836-70a3-42fa-a131-10afa3723d76, uuid:9a8efa38-6114-450f-b31e-1907721b52ae, uuid:28b90444-f9a6-445b-ae57-bf44e8318ff8, uuid:a017c10b-52e4-4208-98a4-83e737ef3638, uuid:2b83f894-0d2f-4949-90d9-2cacf38f9892, uuid:0a7154bd-59b6-4ea5-b740-e3f9822ca2ae, uuid:e49f297b-ed5f-4bb9-9508-682f10184df7, uuid:0a59e027-4232-4f02-bde1-92beb258ce62, uuid:dadcf372-3729-4bf2-ba8f-f72a7ec4ea88, uuid:405349dc-2655-4e81-ac9a-f1fcde905fd4, uuid:825e6488-0122-4a7d-8e2a-ae14a16c2619, uuid:3e7bf2af-fe82-4a17-a809-935cc60701b1, uuid:fd2ede15-e5e1-4f60-9414-054da9963603, uuid:bf7aab1a-ab3f-450a-abda-9a1c5b4932c8, uuid:b6dfec6f-362d-4c2b-ad20-25c6f09f22da, uuid:7F18BB8A606DDA118A38F3A4CC2EC49E, uuid:8318BB8A606DDA118A38F3A4CC2EC49E, uuid:ce9837c3-5545-4723-a244-116165fb14af, uuid:5c9e9804-fc0a-4b23-88a8-3c9be9e41d56, uuid:576866d4-5b2d-4503-952e-9edd0cc74d4e, uuid:7f601932-3c48-42b4-80ea-d88dbd5ef567, uuid:ad2c8fae-59c6-475f-9dbc-094cffa19cb5, uuid:6bb91e04-01cb-415c-a6da-f2eb13cc1d3c, uuid:670ddfaa-1ae6-4c89-bde2-ff334baa86cd, adobe:docid:photoshop:1eee2346-7daa-11da-a7ec-87abf836363d, uuid:706442c8-d66b-496f-9e48-a82fea96a08a, uuid:5ab36022-3bdb-4d3d-9a12-c6ee9fcaef77, uuid:ff46b5aa-a22a-4ccd-b5c8-276748df1122, uuid:f5d9e4b2-0902-4e30-869b-bc5243042740, adobe:docid:photoshop:6c7ebea5-7db0-11da-a01e-af3084aead60, uuid:2fe5f2ba-1272-448c-aa68-d8c3086d6c66, uuid:3f958583-bdba-4b0f-a04b-34c0553a9383, adobe:docid:photoshop:6c7ebea7-7db0-11da-a01e-af3084aead60, uuid:51eeb88e-a4a1-47b5-b2c9-f9af2be26df3, uuid:275eb5a1-69a7-48fb-a770-2c7cc236bc5f, uuid:96b22eee-f478-489e-8550-1136f6595cb8, uuid:4ab5312a-80a3-4d31-b65e-f3b62b21bd12, uuid:3a5a5774-2654-4957-9c60-1c29f248bac3, adobe:docid:photoshop:fb5a3110-7db0-11da-a01e-af3084aead60, uuid:6a369d0f-9347-4b5b-a390-8adc11a96c9e, uuid:bb1f5a39-085b-4702-ad88-d410b22da3bf, uuid:99921f24-0784-4535-bce4-0e3f485536f0, uuid:d112a9db-5020-4a09-b917-ce67e2308ca9, uuid:fc37d11a-bc90-4ce6-9f94-feef3b46d9d3, adobe:docid:photoshop:fb5a3112-7db0-11da-a01e-af3084aead60, uuid:4a050c44-b5dd-491c-95b3-7c99b195741a, uuid:ad90488f-44c9-40b9-afb0-ef54d9c6af8e, uuid:621c31ae-ce55-4c96-ae05-c533e98446cd, uuid:0f9aea87-54bf-424e-8c2d-ff0c53d0d3f2, uuid:ff023852-b989-4846-b744-db73f82a8554, adobe:docid:photoshop:fb5a3112-7db0-11da-a01e-af3084aead60, uuid:aa55efa7-a61e-4504-a393-97d0f6f2afa1, uuid:fc90093e-1ec7-452d-87e8-f2e4aaf8e7a4, uuid:f4272ca7-5fd1-4408-b3b3-b340bc132cbc, uuid:1c7448b1-d3c7-48f2-9b6a-7cee188d5348, uuid:86E04E8B0476DA11A38DCD501D0A0DF5, uuid:e6792d0b-946b-4d19-bbc4-cab8e3682d97, uuid:6d7b3ffa-b5bc-47c1-8e1b-3503fb1d0379, uuid:C6A9B5F93B6DDA118A38F3A4CC2EC49E, adobe:docid:photoshop:65ea3d93-7049-11da-bd50-a16116730a41, adobe:docid:photoshop:280007a3-704d-11da-bd50-a16116730a41, uuid:6238DBD6018FDA11B346D9CC7BF01B87, adobe:docid:photoshop:6faf6443-7db5-11da-8c54-ad85c0cc5427, adobe:docid:photoshop:c3c874f0-7db5-11da-8c54-ad85c0cc5427, uuid:FD495599018FDA11B346D9CC7BF01B87, adobe:docid:photoshop:c3c874f4-7db5-11da-8c54-ad85c0cc5427, uuid:FF495599018FDA11B346D9CC7BF01B87, adobe:docid:photoshop:6faf6447-7db5-11da-8c54-ad85c0cc5427, adobe:docid:photoshop:2a7c2577-9128-11da-b0c7-f0f629c34dc9, uuid:2BEEE06FC46BDA11BACCB9814B23CB8A, uuid:93DB1C135F3DDF11AFB4A612E0686986 Format : application/pdf Title : FlexScan S1701/S1721/S1731/S1901/S1911/S1921/S1931 User's Manual Creator : EIZO NANAO CORPORATION Description : 03V21903E1 Author : EIZO NANAO CORPORATION Subject : 03V21903E1EXIF Metadata provided by EXIF.tools