MatrikonOPC Server For Simulation Matrikon OPC User Manual
User Manual:
Open the PDF directly: View PDF
Page Count: 114 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Introduction
- Getting Started
- Configuration
- Configuring Dynamic Data Exchange (DDE)
- Starting the MatrikonOPC Server for Simulation
- Tool Tray Menu
- Control Panel
- Configuration Window
- Options Window
- Server Configuration
- Alias Configuration
- Expression Wizard
- Item Path Browser
- Saving a Configuration
- Clearing a Configuration
- Loading an Existing Configuration
- Shutting Down the Server
- OPC Data Items
- Diagnostics
- Limitations
- Troubleshooting
- Problems and Solutions
- Server stops updating client with item values after 30 days
- Server shuts down after five minutes when no clients connected
- Cannot configure client access paths, so cannot configure item options
- Server cannot be configured; no Matrikon logo in Tool Tray
- OPC client unable to create or read items under configured object (device)
- Server does not retain settings
- Server cannot save configuration in XML format
- Server does not show up in the list of locally available program IDs in OPC client application
- Server does not show up as a program ID in a remote OPC client application
- Access denied or time-out error when connecting to remove server via DCOM
- Server does not start up or client cannot connect
- About screen and Configuration window do not show up
- DA 2.0 asynchronous I/O does not work
- Trouble communicating through a network
- How can OPC data be accessed through other applications?
- How can individual bits be accessed from an integer item?
- Server is using a large portion of CPU resources
- Removing OPC server as a service
- Starting server manually when installed as a service
- Problems and Solutions
- Un-Installation
- OPC Compliance