8000 POS STD PLUS SECURE QSP 4.82 NURIT Credit Card Terminal User Manual

User Manual: NURIT 8000 Credit Card Terminal User Manual Credit Card Machine Manuals - 1st National Payment Solutions

Open the PDF directly: View PDF .
Page Count: 207 [warning: Documents this large are best viewed by clicking the View PDF Link!]

Wireless

Palmtop

Solution

APPLICATION

POS_STD

POS_PLUS

VERSION 4_82

Users Guide

NURIT 8000

Secure

Quick Service Payment

Functionality

User Guide

APPLICATION POS_STD AND POS_PLUS – QSP – VER. 4_82 NURIT 8000 SECURE

Installation Guide 2

Product Information

FCC COMPLIANCE

STATEMENT

Manufacturer: Lipman Electronic Engineering Ltd.

Model: NURIT 8000 Secure

EUROPEAN UNION

DIRECTIVES

CONFORMANCE

STATEMENT

This product is in conformance with the requirements of applicable EU

Council Directives.

WARNING!Changes or modifications to this unit not expressly approved by the

party responsible for compliance could void the user's authority to

operate the equipment.

NOTICE The information contained in this publication is for informational purposes only and

subject to change without notice. It does not represent a commitment on the part of

Lipman USA Inc. or Lipman Electronic Engineering Ltd.

No part of this publication may be reproduced, transmitted, transcribed, stored in a

retrieval system, or translated to any language in any form by any means without the

prior written permission of Lipman.

TRADEMARKS Trademarks and trade names contained in this document belong to their respective

companies.

LIPMAN USA INC. March 2004

50 Gordon Drive Original

Syosset, NY 11791 Publication No.

Tel: (1) 516-484-9898 Fax: (1) 516-484-9057

E-mail: Sales@LipmanUSA.com

APPLICATION POS_STD AND POS_PLUS – QSP – VER. 4_82 NURIT 8000 SECURE

Installation Guide 3

Product Regulatory Information

FCC PART 15

REQUIREMENTS

This equipment has been tested and found to comply with the limits for

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation.

This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of

the following measures:

x Reorient or relocate the receiving antenna.

x Increase the separation between the equipment and the receiver.

x Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

x Consult your dealer or an experienced technician for help.

Connection of peripherals to this unit requires the use of grounded, shielded

cables to ensure compliance with the class B limits.

FCC PART 68

REQUIREMENTS

[APPLICABLE WHEN

USING OPTIONAL

NURIT 8000

SECURE DOCKING

STATION OR NURIT

8000 EXTERNAL

MODEM]

The Federal Communications Commission (FCC) has established rules

permitting this device to be directly connected to the telephone network.

Standardized FCC Part 68 compliant telephone line cords and modular

jacks are used for these connections. This equipment should not be used

on party or coin lines.

If this device is malfunctioning, it may be causing harm to the telephone

network; this device should be disconnected until the source of the problem

can be determined and until repair has been made. If this is not done, the

telephone company may temporarily disconnect service.

The telephone company may make changes in its technical operations and

procedures; if such changes affect the compatibility or use of this device,

the telephone company is required to give adequate notice of the changes.

You will be advised to file a complaint with the FCC.

If the telephone company requests information on what equipment is

connected to their lines, inform them of:

x The telephone number this unit is connected to

x The ringer equivalence number: 0.2A

x The USOC jack required: RJ-11C

x The FCC Registration number:

The Ringer Equivalence Number (REN) is used to determine how many

devices can be connected to your telephone line. In most areas, the sum of

the RENs of all devices on any one line should not exceed five (5). If too

many devices are attached, they may not ring properly. To be certain of the

number of devices that may be connected to the line, as determined by the

total RENs, contact the telephone company to determine the maximum REN

for the calling area.

Continued on next page

APPLICATION POS_STD AND POS_PLUS – QSP – VER. 4_82 NURIT 8000 SECURE

Installation Guide 4

Product Regulatory Information, Continued

FCC PART 90

REQUIREMENTS

This device contains a radio transceiver module, (FCC ID number is

located on the bottom of the terminal), operating under Part 90 of the FCC

rules in a licensed part of the radio spectrum. Qualified personnel must

perform service or repairs to the radio portion of this device. Any

unauthorized modification to the radio module, shielding, or antenna

system may void the user’s authority to operate this device

INCANADA This digital apparatus does not exceed the class B limits for radio noise

emissions from digital apparatuses set forth in the Radio Interference

Regulations of the Canadian Department of Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques

dépassant les limites applicables aux appareils numériques de la classe B

prescrites dans le Règlement sur le brouillage radioélectrique édicté par le

ministère de Communications du Canada.

SHIPPING Carefully pack and send the package prepaid, adequately insured and

preferably in the original carton. Attach a postage-paid letter to the

outside of the package detailing the complaint.

PLEASE NOTE: SHIPMENT MUST BE SENT TO AN AUTHORIZED

DEALER OR SERVICE CENTER ONLY. PLEASE NOTIFY YOUR

LIPMAN REPRESENTATIVE BEFORE SHIPMENT. PRODUCTS SENT

TO OTHER LOCATIONS WILL BE RETURNED AT OWNERS

EXPENSE. CONTACT YOUR DEALER FOR THE CORRECT

ADDRESS.

APPLICATION POS_STD AND POS_PLUS – QSP – VER. 4_82 NURIT 8000 SECURE

Installation Guide 5

LIPMAN USA - NURIT 8000 SECURE - Limited Warranty

Lipman USA Inc. will repair this product with new or rebuilt parts, free of charge, in the U.S.A. for

one (1) year from the date of original purchase in the event of a defect in materials or workmanship.

Carry-in or mail-in service in the continental U.S.A. can be obtained during the warranty period from

our N.Y. Service Center or call 1-800-4-LIPMAN toll free. In New York State call (516) 484-9898.

This warranty is extended only to the original purchaser. A purchase receipt or other proof of date of

original purchase will be required in order to exercise your rights under this warranty.

This warranty only covers failures due to defects in materials or workmanship which occur during

normal use. It does not cover damage which occurs in shipment; failures which are caused by

products not supplied by Lipman USA; or failures which result from accident, misuse, abuse, neglect,

mishandling, misapplication, alteration or modification; service by anyone other than the Lipman USA

Service Center or accredited service centers, or damage that is attributable to acts of God.

Limits and Exclusions

There are no express warranties except as listed above.

LIPMAN USA SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES

RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS

WARRANTY. ALL EXPRESSED AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE

APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or

limitations on how long an implied warranty lasts, therefore some of the above exclusions or

limitations may not apply to you.

This warranty gives you specific legal rights and you may also have other rights which vary from state

to state.

If a problem with this product develops during or after the warranty period, you may contact your

dealer or Service Center. If the problem is not handled to your satisfaction, then write to:

LIPMAN USA INC., 50 Gordon Drive, Syosset, N.Y. 11791

E-mail: NURITsys@lipmanusa.com

Tel: (516)-484-9898 FAX: (516)-484-9057.

APPLICATION POS_STD AND POS_PLUS – QSP – VER. 4_82 NURIT 8000 SECURE

Installation Guide 6

General and Safety Instructions

SECTION

DESCRIPTION

When using this NURIT Wireless POS EDC Terminal or any equipment or

accessories associated with it operation, basic safety precautions as below

should always be followed to reduce the risk of fire, electric shock, or

personal injury.

The following safety instructions are based in general on those provided by

Underwriters Laboratories Inc. U.S.A.

1. Read and understand all instructions.

2. Follow all warnings and instructions marked on the unit.

3. Unplug the unit from wall outlets before cleaning. Do not use liquid or aerosol

cleaners. Use a damp cloth for cleaning and/or a soft brush.

4. Do not use the unit near water when using the AC charger or external modem.

Place the unit on a stable surface when operated in a fixed location. When operated

hand-held, be sure to grasp the unit securely. Serious damage may result if the unit

falls.

Do not cover slots and openings of the unit. They are provided for ventilation and

protection against overheating. Never place the unit near radiators, or in a place

where proper ventilation is not provided.

7. Use only the power source as marked on the unit. If you are not sure of the type of

the power supplied to your home, consult your dealer or local Power Company.

8. Do not place objects on the power cord. Install the unit where no one can step on

the cord.

9. Do not overload wall outlets and extension cords as this can result in the risk of fire

or electric shock.

10.

Never push any objects into this unit through slots (other than those specifically

meant for credit, debit or smart cards) as they may result in risk of fire or electric

shock. Never spill any liquid on the unit.

11.

To reduce the risk of electric shock, do not disassemble any of the equipment or

accessories referred to in this manual. If required, take the equipment to a qualified

serviceperson. Opening or removing covers may expose you to dangerous voltages

or other risks. Incorrect re-assembly can cause electric shock.

Continued on next page

APPLICATION POS_STD AND POS_PLUS – QSP – VER. 4_82 NURIT 8000 SECURE

Installation Guide 7

General and Safety Instructions, Continued

12.

Unplug this unit from the wall outlet and refer servicing to qualified service

personnel under the following conditions:

 When the charger cord or plug is damaged or frayed.

 Liquid has been spilled into the unit.

 Unit has been exposed to rain or water.

 Unit does not work normally, when following the operating instructions.

 Unit has been dropped or damaged.

 Unit exhibits a distinct change in performance.

13. During thunderstorms, disconnect telephone line, if possible. There may be a

remote risk of electric shock from lightning*.

14. Never install telephone wiring during a lightning storm*.

15. Never install telephone jacks in wet locations unless the jack is specifically

designed for wet locations*.

16. Never touch non-insulated telephone wires or terminals unless the telephone line

has been disconnected at the network interface*.

17. Use caution when installing or modifying telephone lines*.

18.

When in the vicinity of a gas leak, do NOT use the NURIT 8000 SECURE, a stand-

alone telephone or a telephone connected to a NURIT docking station to report

such a leakage.

* When using the NURIT 8000 SECURE optional docking station and/or external modem.

IN ADDITION TO THE ABOVE MENTIONED SAFETY INFORMATION,PLEASE NOTE THE FOLLOWING OPERATIONAL

SAFETY INSTRUCTIONS AND CAUTIONS!

Your NURIT 8000 SECURE contains a transmitter and receiver that emit radio frequency (RF)

energy. The actual frequency range used by the NURIT 8000 SECURE is radio-modem dependent

according to specific model. Digital modulation techniques are used. During radio communication, the

local radio system handling the actual communication controls the actual power transmission output

level. This output level may typically vary (relative to distance between user location and cell transmit

sites.)

Continued on next page

APPLICATION POS_STD AND POS_PLUS – QSP – VER. 4_82 NURIT 8000 SECURE

Installation Guide 8

General and Safety Instructions, Continued

POSITIONING The most desired operational position for the terminal is hand-held at an

angle of approximately 30o. The unit is also obviously designed for

optimal tabletop usage. Try and keep the terminal a short distance from

your body.

When used properly, the design of this hand-held wireless terminal

complies with European and International standards for the protection of

public exposure to radio frequency (RF) magnetic signals.

MEDICAL

WARNING!

For those persons using a pacemaker or other medical devices please

read the following important safety notes!

Though most electronic equipment and critical medical devices are

shielded against radio-frequency signals, it is important to realize the

possibilities of potential interference and what standard precautions may

be taken.

PACEMAKERS Industry standards recommend a minimum separation of 6 inches (15

cm) should be kept between a wireless phone-type device and a

pacemaker to prevent any potential problems.

Individuals using a pacemaker should:

1. Always keep the NURIT more than 6 inches (15 cm) from the

pacemaker when using the unit as a cellular phone or when

performing a transaction.

2. Turn the NURIT off immediately if you suspect any problem of

interference.

OTHER MEDICAL

TYPE DEVICES

Consult the manufacturer of your medical-type device to determine its

level of shielding. Note usage regulations in health facilities. Depending

on the proximity to certain equipment, you may be asked not to use your

NURIT terminal or one of its accessories.

OTHER

ELECTRONIC

DEVICES

Radio frequency energy may affect improperly installed or very

sensitive systems. Consult your vehicle manufacturer or air crew (for

possible airborne operation) respectively regarding typical problems that

may arise when using the NURIT. At the time of the publication of this

guide, it is known that all radio-type devices are prohibited to use

while airborne.

Continued on next page

APPLICATION POS_STD AND POS_PLUS – QSP – VER. 4_82 NURIT 8000 SECURE

Installation Guide 9

General and Safety Instructions, Continued

ADDITIONAL

WARNINGS!

1. Do not use your NURIT 8000 SECURE in an area of potential

explosive atmosphere e.g., fuel or chemical storage or transfer

facilities or any area that you would be advised to turn off your

vehicle’s engine. In addition, do NOT replace your battery pack or

charge your NURIT in an area of potential explosive atmosphere.

2. Do NOT use your NURIT in a known blasting area.

3. Do NOT place your NURIT in the area over a vehicle-equipped

air bag.

4. If battery pack has been removed, ensure that no metal objects

come in contact with the pack’s electrical contacts.

5. You are using a NURIT terminal designed for use with a built-in

internal antenna. Do NOT open the unit with the intent of

tampering with the antenna system. Doing so may damage the

unit and violate FCC (Ministry of Communications) regulations.

CONVENTIONS Notes,cautions and warnings are used like this:

"Notes" contain helpful hints and other important information that

will help you get better use from your NURIT.

"Cautions" provide information about procedures that, if not

observed, could result in damage to the NURIT or other

equipment.

"Warnings” mean failure to follow specific procedures and

practices may result in personal injury.

NOTE This publication could include technical or typographical errors. Changes

are periodically made to our publications; these changes will be

incorporated in future editions.

If you ship the product

Carefully pack and send the package prepaid, adequately

insured and preferably in the original carton. Attach a

postage-paid letter to the outside of the package detailing

the complaint.

PLEASE NOTE: SHIPMENT MUST BE SENT TO AN

AUTHORIZED DEALER OR SERVICE CENTER ONLY.

PRODUCTS SHIPPED TO OTHER LOCATIONS WILL

BE RETURNED AT OWNERS EXPENSE. CONTACT

YOUR DEALER FOR THE CORRECT ADDRESS.

Continued on next page

APPLICATION POS_STD AND POS_PLUS – QSP – VER. 4_82 NURIT 8000 SECURE

Installation Guide 10

General and Safety Instructions, Continued

For your future

reference

SERIAL NO.

__________________________

(found on the bottom of the unit)

DATE OF PURCHASE

_______________________

NAME OF DEALER

_____________________________

DEALER'S ADDRESS

_______________________

General Information

FOREWORD Thank you for purchasing the NURIT 8000 Secure Wireless Palmtop

Transaction Terminal. You now own one of the most advanced

electronic point-of-sale (POS) devices manufactured today.

This manual explains basic installation instructions. To fully utilize the

features of your terminal, and for general safety purposes, take some

time to familiarize yourself with this manual, the terminal or any

accessories to be used.

Please store this manual in a safe place for future reference.

Important! Appendix B of this manual is essential and therefore should be read carefully and

thoroughly prior to use of this product. (See page 175)

APPLICATION POS_STD AND POS_PLUS – QSP – VER. 4_82 NURIT 8000 SECURE

Installation Guide 11

NURIT 8000 SECURE - General Overview

Power

REQUIREMENTS

Terminal power requirements (from AC charger): 8.4 VDC at 1.0A

AC charger requirements: 100-240 VAC at 60 Hz (U.S. standard) or;

100-240 VAC at 50 Hz (European standard)

Dimensions

TERMINAL

 Height: 82 mm (3.23 in.)

 Width: 108 mm (4.26 in.)

 Depth: 230 mm (9.06 in.)

PAPER ROLL

 57mm (2.25 in.) x 38 mm (1.5 in.)

 [10.5 mm (0.4 in.) core diameter]

Weight

TERMINAL  650g (1.4 lb.)

* NOTE Specifications are subject to change in the interest of technological

improvement, without notice or obligation.

Technical

Assistance

Contact your Lipman representative for technical assistance and

ordering information regarding specific components or accessories.

APPLICATION POS_STD AND POS_PLUS – QSP – VER. 4_82 NURIT 8000 SECURE

Installation Guide 12

Installation Table of Contents

Installation 13

Unpacking Shipping Carton 14

Main Components 14

Optional Accessories 15

Hardware Features of the NURIT 8000 SECURE 16

Top View 16

Bottom View 16

About the Battery Pack 17

Installing the Battery Pack 17

Removing the Battery Pack 18

Connecting the AC Charger 18

Installing Optional 33.6 Kbps External Modem 19

Installing the Vehicular Charger 19

Removing the Vehicular Charger 20

Installing the Paper Roll 20

Installing the Keypad Cover 21

Removing the Keypad Cover 21

Using the Magnetic Card Reader 21

Using the Smart Card Reader 22

Installing the GSM Subscriber Identity Module (SIM) Card 22

Connecting Typical Peripheral Device 23

Using an Optional Cellular Headset 23

Infrared (IrDA) Communication Link 24

General Care & Maintenance 24

An Overview of the NURIT 8000 SECURE 25

The Terminal Keyboard 25

Powering the unit On and Off 26

APPLICATION POS_STD AND POS_PLUS – QSP – VER. 4_82 NURIT 8000 SECURE

Installation Guide 13

Installation

SELECTING A

LOCATION

Select a location for the NURIT 8000 SECURE Hand-Held Wireless

terminal that is safe and convenient for both the retailer and cardholder.

CAUTION!The NURIT 8000 SECURE is designed for indoor use when using the

unit’s AC charger, optional docking station or optional external modem.

The unit is designed to be operated outdoors, but should only be

unit be powered or charged outdoors using its AC charger or docking

station. Obviously, the NURIT 8000 SECURE should not be used in

areas of excessive moisture or heat.

Avoid areas with:

 Excess heat, dust or other debris

 Oil or moisture

WARNING!When connected to the terminal’s AC charger, optional docking station

or external modem, do not use the terminal near water, including sink,

laundry tub or pool. In addition, avoid exposure to:

Devices that radiate excessive voltage fluctuations or electrical

noise, such as air conditioners, fans, electric motors, neon signs,

or high-frequency security devices.

Direct sunlight or objects that radiate heat.

Metal partitions or such obstructions that may disrupt radio

reception or transmission.

WARNING!When not operated from its hand-held position, place the NURIT 8000

SECURE on a flat table or countertop. When used in conjunction with

its optional external modem or docking station, the terminal should be

conveniently located in relation to a telephone line and AC power outlet.

To meet standard ventilation requirements, at least 22.1 centimeters

(8.7 inches) of clear space must be provided around the terminal when

placed in its fixed operating location.

APPLICATION POS_STD AND POS_PLUS – QSP – VER. 4_82 NURIT 8000 SECURE

Installation Guide 14

Unpacking Shipping Carton

When opening the original shipping carton, carefully inspect the contents for any damaged or

missing components. Lipman has taken all measures to provide you with a complete unit. If

shipping damage is evident, file a claim with the shipping company. Please notify your

Lipman distributor concerning this damage, and if any components are missing.

Instructions Follow the steps below when unpacking the NURIT 8000 SECURE

terminal and its supplied accessories and/or options from carton:

Step Action

1. With the carton right side up, remove the carton’s outer sleeve.

2. Open the carton and carefully remove the contents.

3. Stop.

For your personal safety, do NOT use a NURIT terminal showing any signs of damage!

Note

Before actual use of the terminal, remove the thin

transparent plastic membrane that covers the LCD

screen.

Main Components

ITEM

# 1. NURIT 8000 SECURE Terminal

# 2. AC Charger

# 3. Paper Roll Spindle

# 4. Lithium-ion Battery Pack

# 5. Keypad Cover

# 6. Thermal Paper Roll

# 7. Documentation Kit.

APPLICATION POS_STD AND POS_PLUS – QSP – VER. 4_82 NURIT 8000 SECURE

Installation Guide 15

Optional Accessories

# 1. Docking Station

# 2. PC-Terminal Download Cable, (Cat. No. FCL09503.)

# 3. Keyboard Emulation Barcode Reader Adapter Cable

(Cat. No. FCL09506.)

# 4. Terminal-to-Terminal (peer-to-peer) Interconnection

Cable, (Cat. No FCL09505.)

# 5. External Modem

# 6. Hands-Free Headset (2.5 mm plug) (contact your

cellular dealer for purchasing details)

# 7. Cigarette Lighter Vehicular Charger

# 8. Touch Screen Stylus

# 9. Standard RS-232 Barcode Reader Adapter Cable

(Cat. No. FCL09504.)

Availability of accessories or options may vary according to customer requirements. At the

publication time of this manual, some items may not yet be available. Consult your Lipman

representative for details regarding these and any upcoming options. Connection of any non-

Lipman-approved accessory may cause damage and thus void the Limited Warranty of this

equipment.

APPLICATION POS_STD AND POS_PLUS – QSP – VER. 4_82 NURIT 8000 SECURE

Installation Guide 16

Hardware Features of the NURIT 8000 SECURE

Take a few moments to familiarize yourself with the terminal’s main feature locators as

depicted in the following illustrations.

Top View

# 1. Thermal Paper (Receipt)

# 2. Paper Roll Cover

# 3. Paper Cover Release Button

# 4. Graphical Display (Touch Display, Optional)

# 5. Magnetic Card Reader

# 6. Keypad

# 7. Keypad Cover

# 8. Smart Card Reader

# 9. IrDA Window

# 10. Battery Charge Connector

# 11. Data Connector

# 12. Headset Connector

Bottom View

# 1. Rubber Stop

# 2. Radio-Modem Info. Label

# 3. Model/Barcode-Serial No. Label

# 4. Compliance Label

# 5. Battery Pack

# 6. Battery Pack Removal Snap

# 7. Docking Station Connector Cover or Connector

(Model Dependent)

APPLICATION POS_STD AND POS_PLUS – QSP – VER. 4_82 NURIT 8000 SECURE

Installation Guide 17

About the Battery Pack

SMART LITHIUM-

ION BATTERY

PACK

The supplied high-performance Lithium-ion battery pack provides 7.2

VDC at 1450 mAh of capacity. When fully discharged, the battery fully

recharges within 3 hours while installed in the terminal. An 80% charge

capacity is reached within 1 hour. The terminal can be left connected to

its AC charger indefinitely without causing damage to the battery.

Under typical use, the battery pack is good for well over 500 charge

cycles, after which operating time may very slowly decrease. This

battery pack has a self-discharge rate, and without normal use will lose

approximately 1% of it charge per day. Replace the battery pack with a

new one when the charge capacity is too weak for normal operation. If

for any reason you intend not to use your NURIT 8000 SECURE for an

extended period of time, remove the battery pack located on the

underside of the unit.

CAUTION!When using the Lipman-supplied AC charger, the Lithium-ion battery

pack must be installed in the terminal.

WARNING!1. Please do NOT dispose of the battery pack in a fire! Dispose of

use batteries in accordance with local recycling regulations.

2. If for any reason you intend to remove the NURIT’s battery pack,

make sure that the metal contacts do not come in contact with any

metal objects.

NOTE Extreme temperatures will degrade the performance of your battery

pack. Do not store this Lithium-ion battery pack in an ambient

temperature range below -20oC (4oF) and above 60oC (140oF).

Installing the Battery Pack

INSTRUCTION Use the following step/action table when installing the battery pack:

Step Action

Carefully invert the terminal. The terminal can be held in hand

or gently placed on a soft sponge-like surface so as not to

damage the unit’s LCD screen.

Insert the battery pack onto the back of the terminal. Note that

the side of the pack with the arrow engraved on it should face

upward. The insertion is easily done by sliding the 2 tabs in

the front of the pack into the 2 openings on the front wall of

the battery compartment

3. Press down on the battery pack until it snaps into place

4. Stop.

Ste

Step 2

APPLICATION POS_STD AND POS_PLUS – QSP – VER. 4_82 NURIT 8000 SECURE

Installation Guide 18

Removing the Battery Pack

INSTRUCTION Use the following step/action table when removing the battery pack:

Step Action

Hold the terminal in hand or gently place the unit on a

soft sponge-like surface in order not to damage the LCD

screen.

Remove the battery pack from the back of the unit by

grasping the pack’s locking snap with a finger or

ballpoint pen.

3. Lift the pack away from the unit.

4. Stop.

Connecting the AC Charger

INSTRUCTION The NURIT 8000 SECURE can be operated from an AC wall outlet by using

the supplied AC charger. Use the following step/action table for assistance.

Step Action

1. Plug the connector at the end of the adapter cord into the “power” port

on the left side of the NURIT’s front panel.

2. Plug the AC charger into an electrical outlet.

3. Stop.

Note: When the charger’s LED indicator light is green; the battery is on trickle charge. The

LED light is red when charging (battery is less than 98% changed). If LED indicator is

not illuminated, the charger is disconnected from the wall outlet.

Step 1

Ste

2 Î

APPLICATION POS_STD AND POS_PLUS – QSP – VER. 4_82 NURIT 8000 SECURE

Installation Guide 19

Installing Optional 33.6 Kbps External Modem

INSTRUCTION The optional 33.6 Kbps external fast modem (other baud rates available)

enables downloading desired applications and parameters to the NURIT

8000 SECURE via a standard telephone line. Use the following

step/action table for assistance.

Step Action

1. Insert the modem’s data plug into the center “data” port on the front of

the NURIT

2. Connect a standard telephone line cord from the modem to a standard

telephone company line socket.

3. Stop.

Installing the Vehicular Charger

INSTRUCTION The Vehicular Battery Charger provides power to the NURIT 8000

SECURE and charges the built-in Lithium-ion battery pack. Use the

following step/action table for assistance.

Step Action

1. Insert the plug at the end of the charger’s cord into the “power” port on

the left side of the NURIT’s front panel.

2. Remove the cigarette lighter from your vehicle’s cigarette lighter socket.

3. Plug the charger’s adapter into the cigarette lighter socket.

4. Stop.

APPLICATION POS_STD AND POS_PLUS – QSP – VER. 4_82 NURIT 8000 SECURE

Installation Guide 20

Removing the Vehicular Charger

INSTRUCTION Use the following step/action table for assistance with removal.

Step Action

1. Unplug the adapter from the cigarette lighter socket.

2. Grasp the plug end of the charger’s cord and pull it out of the NURIT’s

“power” port.

3. Stop.

Installing the Paper Roll

INSTRUCTION Before you can process any transaction that requires a receipt, you must

install a paper roll into the printer compartment. To install this roll, use the

following step/action table.

Step Action

1. Place the terminal preferably on a flat surface.

Open paper roll cover by pushing the release button in the

direction of the arrow appearing on it.

3. Open the cover.

Remove the paper roll spindle from the paper roll

compartment and insert it into the new paper roll.

While holding the roll in hand, mount it together with its

spindle in place into the 2 slots on both sides of the

compartment. Ensure that the paper roll feeds from the

bottom!

Approximately 1 inch (2.5 cm) of paper should extend out of

the paper roll compartment (between the cover and

serrated tear strip.)

Press down on the front of the paper cover until it snaps in

place.

Stop.

APPLICATION POS_STD AND POS_PLUS – QSP – VER. 4_82 NURIT 8000 SECURE

Installation Guide 21

Installing the Keypad Cover

INSTRUCTION Use the following step/action table for assistance installing the keypad

cover.

Step Action

1. Position the tabs on the inner front sides of the cover over the

indentations on both sides of the NURIT (on both sides of the keypad.)

2. Press down on the cover until it snaps in place.

3. Stop.

Removing the Keypad Cover

INSTRUCTION Use the following step/action table for assistance removing the

keypad cover.

Using the Magnetic Card Reader

INSTRUCTION A magnetic swipe card reader is located between the terminal’s

LCD screen and paper cover release button.

Step Action

1. Grasp the card so that its magnetic stripe is facing

you.

2. Place the card into one end of the card reader

groove.

Swipe the card in a smooth continuous manner.

This can be done in any direction desired (left-to-

right or right-to-left).

4. Stop.

Step Action

1. Hold the NURIT securely with one hand.

2. Grasp the cover with your other hand and lift upward.

The cover will easily unsnap from the terminal.

3. Stop.

APPLICATION POS_STD AND POS_PLUS – QSP – VER. 4_82 NURIT 8000 SECURE

Installation Guide 22

Using the Smart Card Reader

INSTRUCTION Refer to the following action for assistance using the smart card reader.

Action

Insert the smart card (chip end first) into the

opening of the reader on the terminal’s front

panel. For guidance, most smart cards will

have directional guide arrows engraved or

inscribed on the cards.

Installing the GSM Subscriber Identity Module (SIM) Card

CAUTION!The SIM card contacts can be easily damaged. Do not bend or scratch

when installing or removing the card.

NOTE If you are not using a GSM radio modem, an optional Security Access

Module (SAM) may be installed instead of the SIM card used. The NURIT

8000 SECURE can house up to 2 optional SAM modules.

INSTRUCTION The SIM card supplied by your GSM Cellular Service Provider is a special

card containing your telephone number, specific service details and

memory for storing telephone and messages. Your NURIT terminal can

NOT receive or make calls without the SIM card installed. Use the

following step/action table for assistance.

Step Action

1. Grasp the battery pack snap and lift upward.

Open the SIM reader holder by pushing it in the direction of the

arrow engraved on it (towards you) and lifting the hinged holder

upward.

3. Hold the SIM card so that its chip side is facing down towards the

contacts on the reader.

Insert the SIM card into the grooves on each side of the holder.

Make sure that you slide the end closest to the chip into the

grooves of the holder first.

5. Close the SIM cardholder and lock it by pushing it towards the

front of the battery pack compartment.

6. Replace the battery pack on the back of the NURIT. Press down

on the pack to lock it in place.

APPLICATION POS_STD AND POS_PLUS – QSP – VER. 4_82 NURIT 8000 SECURE

Installation Guide 23

Connecting Typical Peripheral Device

INSTRUCTION Numerous peripheral devices can be used with the NURIT 8000 SECURE

terminal. A barcode reader is one such typical device. An interconnection

explanation and illustration appear below for a Keyboard Emulation

Barcode Reader.

Step Action

1. Connect the Barcode Reader to appropriate end of

the optional adapter cable (part no. FCL09506).

2. Insert the other end of the adapter cable into the

center “data” port on the unit’s front panel.

Using an Optional Cellular Headset

INSTRUCTION An optional headset may be used with NURIT 8000 models adapted for

cellular telephone communication.

Action

To use the headset, insert its plug into the

“stereo-type” port on the right side of the unit’s

front panel. When removing the headset from

the panel, make sure to grasp the plug and

not the cord.

APPLICATION POS_STD AND POS_PLUS – QSP – VER. 4_82 NURIT 8000 SECURE

Installation Guide 24

Infrared (IrDA) Communication Link

INSTRUCTION Your NURIT 8000 SECURE (model dependent) is capable of

communicating via an infrared communication link.

Action

In order to communicate, the infrared windows

of both units must be directed towards each

other. Typically, these units can be 2 NURIT

8000 SECURE terminals or a terminal and

personal computer.

The distance between units should not exceed

11.8 inch (30cm).

General Care & Maintenance

INSTRUCTION The NURIT 8000 SECURE has been designed to give you long and

trouble-free service with minimal operator care. The user should protect

the terminal from direct sunlight, extreme heat, dampness and dust.

CAUTION!Never use thinners, benzene and synthetic cleansers since they may

distort or damage the plastic and critical parts.

CLEANING THE

TERMINAL

For normal cleaning, gently wife off dirt from the body of the terminal with

a soft, damp, lint-free cloth. A very mild dishwashing detergent can be

used to dampen the cloth. Alcohol or alcohol-based cleansers may also

be used for more difficult stains. If available, a low-pressured blower

can be used to remove dirt accumulated around the keypad buttons and

within the paper roll compartment.

If possible, use a lens blower to remove dust and dirt from the LCD

screen. When so necessary, gently wipe the screen with a soft cloth or

eyeglass lens wiper.

CAUTION!Never rub or strongly press on the LCD screen. Doing so may lead to

damage or other possible problems.

APPLICATION POS_STD AND POS_PLUS – QSP – VER. 4_82 NURIT 8000 SECURE

Installation Guide 25

An Overview of the NURIT 8000 SECURE

INFORMATION This section will provide you with a basic understanding of the operations

and functionality of the NURIT 8000 SECURE. This will include a keyboard

overview and a basic explanation of common terms that you will find

throughout this manual.

The Terminal Keyboard

Key Function

[Back Arrow – ON/OFF] Use this key to power the terminal On and Off and as a

Back Space when entering data.

[F]

(Function Key)

Use this key to batch the terminal in addition to

accessing other convenient hot keys.

[MENU/CANCEL] Use this key to access the terminal’s main menus and

sub-menus.

[CLEAR] This key will clear entered data.

[NUMBER PAD]

Used to enter all numeric values. In addition these keys

are used in conjunction with the Alpha key to input

alphabet text and various symbols.

[ALPHA] This key converts the numbers on the keypad to their

corresponding letters.

[]And []Use these arrow keys to scroll through the menu and

submenu options.

[ENTER] Use this key to make selections.

APPLICATION POS_STD AND POS_PLUS – QSP – VER. 4_82 NURIT 8000 SECURE

Installation Guide 26

Powering the unit On and Off

Instruction Use the following steps to power the unit on and off. The terminal can be

powered on and off when on AC power and battery pack.

To Power On:

x Press the [ON/OFF] Button.

To Power Off:

x Press the [F] button and the [ON/OFF] buttons simultaneously

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 1

User Guide Table of Contents

INTRODUCTION 1

RETAIL - User Operations 2

Processing Sale Transactions 2

Credit Cards 2

Debit Cards 3

EBT Cards 5

(Electronic Benefits Transfer) 5

Check Sale 7

Cash Sale 8

Processing Retail Sale Transactions – With Tip(s) 8

Voids 10

Void Sale 10

Void Return 11

Void Forced Sale 12

Returns 13

Credit Returns 13

Debit Return 14

Verify 15

Forced Transaction 16

Batching 17

Accessing Hot Keys 18

DL Verification General Report * 21

DL Verification Clerk Report * 22

DL Verification Supported States * 23

Clear Driver License Data * 24

Quick Service Payment 25

Menu Options 29

Accessing the Main Menu 29

1. Reports 30

Print the Default Report 31

Print the Current Report 32

Print History Reports 34

Display Transactions 36

Receipt Copy 38

Print the Performance Report 39

Tip Report 40

Report Set up – Printing Visa/MC Options 42

Report Setup – Tip Discount 43

RAM Disk Report 44

Communication Log Report 45

2. Merchant Parameters 46

Authorizations – TRANSACTION TYPE 46

Authorizations – Card Type 48

Authorizations – Debit Prompt 49

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 2

Security Levels 51

Edit Header/Trailer 52

Set Cash EDC 54

Setting the Merchant Fee 55

Set Batch Time 56

Server ID/Clerk ID/Invoice Mode 58

Site ID 60

3. Merchant Options 61

Paper Type 61

Buzzer Set 62

Operation Mode 63

Battery Saver 64

Prints Disclaimer 66

Set Menu Type 67

Set Halo 68

Print Setup 70

Store & Forward 71

Turning Store & Forward On/Off 71

Mode Select 72

Display Transactions 75

Reports – Store & Forward 77

Upload Transactions 79

Resend Failed Transactions 80

Delete Failed Transactions 81

Check Reader 82

Check Imager – Send Images (Bridge) 83

Check Imager – Send Images (FTP) 85

Check Imager – Clear Images 86

Check Imager – Clear Images 87

Check Imager – Setup Menu (Bridge) 88

Check Imager – Setup Menu (FTP) 89

Check Imager – Franking 95

Signature Option 96

Bridge Communication 97

Language Setup 98

4. Host Parameters 99

Host Parameters 99

Host Phones 101

Print EDC Setup 103

Protocol Version 104

AutoDial Setup 105

Host Radio Address 107

5. System Options 109

Set Terminal Time and Date 109

Edit PIN Key 111

Select Master Key Location 112

Set Batch Number 113

Edit Database 115

Edit Database – Void a Transaction 115

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 3

Edit Database – Clearing the Database 117

Edit Database – CLEAR OFFLINE 118

Working Mode 119

Working Mode – TIP OPTIONS 119

Working Mode – AVS OPTIONS 121

Working Mode – Card Present Options 123

Working Mode – Comment Options 125

Predial Call 126

Pin Pad Initialization 127

Pin Pad Function 128

Pin Pad Configuration 129

Status Bar 130

6. Radio Params 131

Radio Tests - RADIO RSSI 131

Radio Tests - TERMINAL MAN# (MOBITEX ONLY) 132

Radio Tests - Terminal LLI# (Motient Only) 133

Radio Tests - Radio Information 134

Print Params 135

Battery Test 136

7. Download 137

Download Definitions 137

Downloading 137

Download – Communication Parameters, Phone 140

Download – Comm Parameters, Exchange Prefix 141

Download – Comm Parameters, Via> 143

Download – Comm Params, Baud Rate 144

Download – Comm Params, Dial> 146

Download – Comm Params, Gateway> 147

Download – Comm Params, Suffix 149

8. Communication 151

Minimum Retries 151

Dial: Tone/Pulse 152

Exchange Prefix 153

Gateway 154

Suffix 155

Via Line/Radio 156

CHECK LINE: ON 157

CHECK LINE: ON 158

Appendix A – Restaurant Tips and Tabs 159

Working Mode – TIP OPTIONS 159

Add Tips 162

Working Mode – Tab Option 164

Open a Tab 165

Close a Tab 166

Delete a Tab 168

Show Tabs 169

Tab Report 170

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 4

Open Tab Report 170

Close Tab Report 171

POS STD and PLUS - NURIT 8000 SECURE QUICK REFERENCE GUIDE 172

BASIC TROUBLESHOOTING 174

Appendix B - Lipman USA Licensing Agreement 175

Lipman USA Licensing Agreement, Continued 177

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 1

INTRODUCTION

INFORMATION

Presently, there are three varieties on the 4.82 Application. They include:

- SCA_STD (for script)

- POS_STD (this version is supported in NURIT models 2085 and higher)

- POS_PLUS (this version is supported in NURIT 2085-M21, NURIT 3020,

NURIT 8320 and NURIT 8000 terminals The major difference between

POS_STD and POS_Plus is that Plus supports Magtek in addition to

signature capture, RDM, multi-language, the Communication Log

Report and the RAM Disk Report. Driver License Verification is

supported by application version POS7PLUS only.)

APPLICATION NURIT MODEL

POS7_STD **

NURIT 2085, NURIT 3010, NURIT 3020, NURIT 8000 SECURE AND NURIT

8320

** REQUIRES NURIT OPERATING SYSTEM (NOS) 7.8.4 AND ABOVE.

PLEASE NOTE: For Merchants requiring PLUS Features, see the information in the following

chart.

APPLICATION NURIT MODEL

POS6PLUS * NURIT 2085-M21 AND NURIT 3020

* REQUIRES NURIT OPERATING SYSTEM (NOS) 6.00 AND ABOVE.

POS7PLUS ** NURIT 2085-M21, NURIT 3020, NURIT 8000 SECURE AND NURIT 8320

** REQUIRES NURIT OPERATING SYSTEM (NOS) 7.8.4 AND ABOVE.

PLEASE NOTE: The Nurit Control Center version must 7.4.11 or higher when building terminal

files with any of these application versions.

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 2

RETAIL - User Operations

INFORMATION This section explains the various instructions required in operating a NURIT

terminal. In this manual, transactions, operations, and specific functions available

with the POS_STD and POS_PLUS applications are explained. Screen displays

are typical of the NURIT 8000 SECURE terminal.

Processing Sale Transactions

Credit Cards

STEP ACTION DISPLAY

1. Be sure the terminal is at the Idle Prompt

Swipe the credit card, or manually key in the account number and

expiration date.

3. Input the dollar amount of the transaction

without a decimal point and press [ENTER]

Press [ENTER] if the card is present at the

Point of Sale

Press [MENU] if the card is not present.

Note: This prompt is displayed for manually entered

transactions only.

Using the stylus, have the customer sign

on the touch screen display.

Note: Signature Capture must be enabled. If not

enabled or if the customer does not sign on the

screen, a blank signature line will print on the

receipt.

Continued on next page

CREDIT . . . . . . SALE

ACCOUNT Æ

CREDIT . . . . . . SALE

AMOUNT 0.00

Card Present?

ENTER=YES, ESC=NO

Please Sign:

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 3

Credit Cards, Continued

STEP ACTION DISPLAY

The terminal will now contact the host for an

approval and print a receipt.

Press any key for second receipt.

Stop.

Debit Cards

STEP ACTION DISPLAY

1. Press [ENTER] until the Debit prompt is

displayed.

Swipe the debit card.

(Debit cards cannot be keyed in manually,

they MUST be swiped)

3. Input the dollar amount of the transaction

without a decimal point. Press [ENTER].

The terminal will now Prompt you to enter a

Cash Back amount then press [ENTER]

Press [ENTER] to bypass.

Continued on next page

DEBIT . . . . . . .SALE

AMOUNT 0.00

CASH BACK:

0.00

DEBIT . . . . . . .SALE

ACCOUNT Æ

CREDIT . . . . . . .SALE

ACCOUNT Æ

TEAR SLIP ---->

Press any Key …

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 4

Debit Cards, Continued

STEP ACTION DISPLAY

Input the PIN on the Keypad.

Note: When using an external PIN pad you will be

prompted on the PIN pad, not on the terminal.

After PIN has been input press [ENTER].

The terminal will now contact the host for

approval and print a receipt.

Press any key for second receipt.

Note: Terminal must be setup when programmed to

print two receipts or Paper Type must be set to

Customized.

8. Stop.

To end hit (ENT)

* * * *

TOTAL $##.##

Enter your P.I.N.

TEAR SLIP ------>

Press any key . . .

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 5

EBT Cards (Electronic Benefits Transfer)

STEP ACTION DISPLAY

From the Idle prompt press [ENTER]

until the display identifies an EBT sale.

(see right Î)

2. Swipe the EBT card, or manually enter the account number including the

expiration date, or if required, the ‘GEN’ number.

Press [1] for Food stamp

Press [2] for Cash Terminal Benefit

Input the dollar amount of the

transaction without a decimal point then

press [ENTER]

5. If Then

Food Stamp Go to step #8.

Cash Benefit Proceed to next step.

The terminal will now Prompt you to

enter a Cash Back amount or press

[ENTER] to bypass.

Continued on next page

EBT . . . . . . . . . SALE

ACCOUNT Æ

1. FOOD STAMP

2. CASH BENEFIT

EBT . . . . . . . . . SALE

AMOUNT 0.00

EBT. . . . . . . . . .SALE

CASH BACK 0.00

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 6

(Electronic Benefits Transfer), Continued

STEP ACTION DISPLAY

7. If Then

Food Stamp Go to step #8.

Cash Benefit Proceed to next step.

The terminal will now Prompt you to enter

a Cash Back amount or press [ENTER]

to bypass.

9. Input the PIN on the Keypad then press

[ENTER]

10.

Press any key for second receipt.

Note: Terminal must be setup when programmed

to print two receipts or Paper Type must be

set to Customized.

11. Stop.

EBT. . . . . . . . . .SALE

CASH BACK 0.00

TOTAL $##.##

Enter your P.I.N.

TEAR SLIP ------>

Press any key . . .

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 7

Check Sale

STEP ACTION DISPLAY

From the idle prompt press [ENTER]

until the display identifies a check sale.

Input the amount to be verified and

Press [ENTER]

Input the 17 digit MICR number from the

check & press [ENTER]

Place the Check in the Check

Reader/Imager

*Display will vary depending on check hosts

If a Check Imager was used, the

terminal will display results.

After completion, a successful storage

message will display.

Terminal will print one receipt if paper type is Single/ Double or two receipts

if paper type is Customized.

Stop.

Enter MICR or

Use Check Reader

CREDIT . . . . .SALE

ACCOUNT Æ

CHECK . . . . .VERIFY

AMOUNT 0.00

Storing Images,

Please Wait

Check Image

Storage Complete

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 8

Cash Sale

INFORMATION The Cash EDC mode must be turned on to process cash transactions.

STEP ACTION DISPLAY

From the Idle prompt press [ENTER] until

the display identifies a Cash Sale.

(See right Î)

2. Input the dollar amount of the sale and press [ENTER]

3. Terminal will print one receipt if paper type is Single/Double or two receipts if

paper type is Customized.

4. Stop.

Processing Retail Sale Transactions – With Tip(s)

Turing the Tips function on and off is an option. There may be up to 3 tips/gratuities added per

transaction. You can change the name of the tip for identification/reporting and add a default tip

amount. Use the following step/action table for assistance processing a sale with tip option #1

turned on.

STEP ACTION DISPLAY

1. Be sure the terminal is at the Idle Prompt

2. Press [ENTER] until the desired payment method is displayed.

3. Swipe the credit card, or manually key in the account number and expiration

date.

4. Input the dollar amount of the transaction

without a decimal point. Press [ENTER].

Continued on next page

CASH . . . . . . . SALE

AMOUNT 0.00

CREDIT . . . . . . SALE

ACCOUNT Æ

CREDIT . . . . . . SALE

AMOUNT 0.00

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 9

Processing Retail Sale Transactions – With Tip(s), Continued

STEP ACTION DISPLAY

Input the tip amount and press [ENTER]

Press [ENTER] to bypass

Note:Repeat step for Tip #2 and Tip #3

if necessary.

The terminal will now contact the host for approval.

If prompted, have the customer sign

on the touch screen display using the

stylus.

Note: Signature Capture must be enabled. If not

enabled or if the customer does not sign on

the screen, a blank signature line will print

on the receipt.

8. If requested, press any key to print

second receipt.

Stop.

Enter Tip

Amt: 0.00

Please Sign:

TEAR SLIP ------>

Press any key . . .

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 10

Voids

Void Sale

INFORMATION

A void of a sale can be done if the original sale was Processed in the same batch.

If the original sale was NOT Processed in the same batch a Return must be

processed.

STEP ACTION DISPLAY

From the Idle prompt press the []or []

key until the display identifies a Void/Sale.

(See right Î)

2. Swipe the credit card or key in the account number and expiration date

manually.

3. Input the dollar amount to be voided.

4. Press [ENTER].

Note:Depending upon the host, the terminal might dial out for authorization.

Using the stylus, have the customer sign

on the touch screen display.

Note: Signature Capture must be enabled. If not

enabled or if the customer does not sign on the

screen, a blank signature line will print on the

receipt.

6. Press any key to print second receipt.

7. Stop.

CREDIT . . VOID/SALE

ACCOUNT Æ

Please Sign:

TEAR SLIP ------>

Press any key . . .

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 11

Void Return

INFORMATION A Void Refund is done, if the original return is from the same batch. If the refund

is from a different batch, you will not be able to Process a void return.

STEP ACTION DISPLAY

From the Idle prompt press the []or [] key

until the display identifies a Void/Return.

(See right Î)

Swipe the credit card or key in the account number and expiration date

manually.

Input the amount of the return to be voided.

Press [ENTER].

Note:Depending upon the host, the terminal might dial out for authorization.

Using the stylus, have the customer sign on

the touch screen display.

Note: Signature Capture must be enabled. If not enabled

or if the customer does not sign on the screen, a

blank signature line will print on the receipt.

6. Press any key to print second receipt.

Stop.

CREDIT . . VOID/RTRN

ACCOUNT Æ

Please Sign:

TEAR SLIP ------>

Press any key . . .

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 12

Void Forced Sale

INFORMATION

A Void Forced Sale is done, if the original Forced Sale is from the same

batch. If the forced sale is from a different batch, you will not be able to

Process a void forced sale.

STEP ACTION DISPLAY

From the Idle prompt press the []or []

key until the display identifies a Void/Forced.

(See right Î)

2. Swipe the credit card or key in the account number and expiration date

manually.

3. Input the amount of the Forced Sale to be voided.

4. Press [ENTER].

Note: Depending upon the host, the terminal might dial out for authorization.

Using the stylus, have the customer sign

on the touch screen display.

Note: Signature Capture must be enabled. If not enabled

or if the customer does not sign on the screen, a

blank signature line will print on the receipt.

6. Press any key to print second receipt.

7. Stop.

CREDIT . .VOID/FRCD

ACCOUNT Æ

Please Sign:

TEAR SLIP ------>

Press any key . . .

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 13

Returns

Credit Returns

INFORMATION

A refund to a customer’s credit card account can be done if the original sale is

from a different batch. If the sale and refund are in the same batch process a

Void, otherwise, a refund is done as follows:

STEP ACTION DISPLAY

From the Idle prompt press the []or [] key

until the display identifies a Return.

(See right Î)

Swipe the credit card or key in the account number and expiration date

manually.

Input the amount of the Return.

Note: If the original transaction includes a tip amount then the total amount should be entered

as the return amount.

Press [ENTER].

Note: Depending on the host you may be prompted to

enter the Authorization number from the original

transaction.

Using the stylus, have the customer sign on

the touch screen display.

Note: Signature Capture must be enabled. If not enabled

or if the customer does not sign on the screen, a

blank signature line will print on the receipt.

6. Press any key to print second receipt.

Stop.

CREDIT . . . . . RETURN

AMOUNT Æ

CREDIT . . . . . RETURN

ACCOUNT Æ

Please Sign:

TEAR SLIP ------>

Press any key . . .

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 14

Debit Return

INFORMATION A return on a debit transaction can only be done using a bank issued debit card.

STEP ACTION DISPLAY

From the Idle prompt press [ENTER] until DEBIT

is displayed and then use the []or [] key until

the display identifies a DEBIT RETURN.

(See right Î)

2. Swipe the debit card

Input the amount of the Return then press

[ENTER]

Note: If the original transaction includes a tip amount then

the total amount should be entered as the return

amount.

4. Enter the Authorization number form the original

receipt then press [ENTER].

5. Input the PIN on the Keypad.

6. After PIN has been input press [ENTER]

7. If prompted, press any key to print second receipt.

8. Stop.

DEBIT . . . . . . .RETURN

AMOUNT Æ

TOTAL $##.##

Enter your P.I.N.

CREDIT . . . . . RETURN

ACCOUNT Æ

To end hit (ENT)

* * * *

DEBIT . . . . . . RETURN

25.00

ENTER AUTH. No:

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 15

Verify

INFORMATION This function is used to ensure that a customer has adequate funds on their credit

card by obtaining an authorization (THIS DOES NOT CHARGE THE

CUSTOMER’S ACCOUNT).

STEP ACTION DISPLAY

From the Idle prompt press the []or []

key until the display identifies a Verify.

(See right Î)

Swipe the credit card or key in the account number and expiration date

manually.

Input the amount to be verified.

Press [ENTER]. The terminal will process the transaction.

Upon approval, one receipt without a signature line will be printed.

Stop.

CREDIT . . . . .VERIFY

ACCOUNT Æ

CREDIT . . . . .VERIFY

AMOUNT 0.00

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 16

Forced Transaction

INFORMATION When authorization has previously been obtained, a Forced Sale should be done to

process the transaction.

STEP ACTION DISPLAY

From the Idle prompt press the []or

[] key until the display identifies a

Forced Sale.

(See right Î)

2. Swipe the credit card or key in the account number and expiration date

manually.

3. Input the amount of the transaction. This amount should be equal to or less

than the amount that was verified.

4. Input the authorization number previously

obtained.

Using the stylus, have the customer

sign on the touch screen display.

Note: Signature Capture must be enabled. If not

enabled or if the customer does not sign on

the screen, a blank signature line will print

on the receipt.

6. Press any key for the second receipt to

print.

7. Stop.

CREDIT . . . . .FORCED

ACCOUNT Æ

CREDIT . . . . .FORCED

21.00

ENTER AUTH. NO:

Please Sign:

TEAR SLIP - - - ->

Press Any Key

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 17

Batching

INFORMATION To Process a manual batch release, or settlement of transactions stored in the

NURIT 8000 SECURE memory, use the following step/action table for assistance

STEP ACTION DISPLAY

From the Idle prompt press [F]

(See right Î)

Note: Prompts will vary by host.

2. Press [2] to start batch process.

Select the number that corresponds with

the host you are batching or press [1] for

ALL.

Note: Prompt will vary with terminal setup.

Press [1] to close the batch.

Note: Prompts will vary by host.

The terminal will contact the host processor, close the batch and print a batch

report.

Stop.

Note:

If a terminal is programmed for auto batch, the host will close the batch

automatically each night at a specific time and the terminal will print a batch

report. However, the transactions will only clear at the time of the first sale

of the new batch. Although your terminal will be programmed for auto batch,

you still have the option to batch manually. Images are uploaded at the start

of the batch process.

FUNCTION MENU

1.REPORT

2.BATCH

3.REVIEW

4.FIND

CHOOSE FUNCTION

1.Close Batch

2.Host Totals

3.Summary Report

CHOOSE HOST:

1.ALL

2.CREDIT HOST

3.DEBIT HOST

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 18

Accessing Hot Keys

FUNCTION

DESCRIPTION

Hot Keys are short cuts to reports and functions. Hot Keys must be

programmed when the terminal file is built and downloaded into the terminal

with the application and parameters. A Hot Key List is printed at the end of

the Print Setup Report.

Example of HotKey List:

Print Setup F1: Driver License

Report: F2: Open a Tab

F3: Close a Tab

STEP ACTION DISPLAY

1. If necessary, press [MENU/ESC] to

return the terminal to the idle prompt.

2. Press the [F] key at the same time as pressing the number key on the

list. I.E., press [F] and [2] to Open a Tab.

3. Stop.

CREDIT . . . . .SALE

ACCOUNT Æ

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 19

Driver License Verification *

INFORMATION This feature is programmable at the Nurit Control Center level using one of

the terminal’s eight hot keys. The Programmed Hot Keys are listed at the

bottom of the Setup Report.

*NOTE: All Driver License Verification functions are available with

POS7PLUS application only.

STEP ACTION DISPLAY

From the idle prompt, press the [F] key at

the same time as pressing the number

key for Driver License Verification.

Swipe the customer’s Driver License with the

Magnetic strip facing down and to the right.

Note: For a successful swipe the customer’s DL must

have a magnetic strip.

3. Enter the Server ID then press [ENTER].

Select the purchase type for the Age

Verification.

1. Tobacco

2. Liquor

3. Scan (Displays age and issuing state)

Continued on next page.

CREDIT . . . . . . SALE

ACCOUNT Æ

Swipe DL Card ->

SELECT 1: TOB

2: LIQ 3: SCAN

ENTER SERVER ID

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 20

Driver License Verification, Continued

STEP ACTION DISPLAY

The terminal will read the magnetic strip and

determine if the customer’s age is

appropriate for the type of purchase.

Note: Prompts will vary depending on the selection.

The display will show the customer’s age

and resident state.

Note: Prompts will vary by customer.

Stop.

LIQUOR APPROVED

Age is: 30 PA

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 21

DL Verification General Report *

STEP ACTION DISPLAY

From the idle prompt, press the [F] key at

the same time as pressing the number

key for Driver License Verification.

Press the [BS] key to list the available

functions.

3. Press [ENTER] to print the report.

Stop.

CREDIT . . . . . . SALE

ACCOUNT Æ

Swipe DL Card ->

DRIVER LICENSE

1.General Report

2.Clerk Report

3.Supported States

4.Clear DL Data

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 22

DL Verification Clerk Report *

STEP ACTION DISPLAY

From the idle prompt, press the [F] key at

the same time as pressing the number

key for Driver License Verification.

Press the [BS] key to list the available

functions.

3. Press [2] to print the Clerk Report.

4. Enter the Server ID then press [ENTER].

Stop.

CREDIT . . . . . . SALE

ACCOUNT Æ

Swipe DL Card ->

DRIVER LICENSE

1.General Report

2.Clerk Report

3.Supported States

4.Clear DL Data

ENTER SERVER ID:

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 23

DL Verification Supported States *

STEP ACTION DISPLAY

From the idle prompt, press the [F] key at

the same time as pressing the number

key for Driver License Verification.

Press the [BS] key to list the available

functions.

Press [3] for Supported States. A list of the

states currently supported will be printed.

Stop.

The list of supported states is updated periodically as states change the type of license

issued. The following is a list of the supported states when this document was written and

might not be current. Print a list from your terminal for the latest information.

AR – Arkansas MI – Michigan

AZ – Arizona MN – Minnesota

CA – California MT – Montana

CO – Colorado NM – New Mexico

DC – District of Columbia OH – Ohio

FL – Florida PA – Pennsylvania

IA – Iowa TX – Texas

KS – Kansas VA – Virginia

LA – Louisiana VT – Vermont

MA – Massachusetts WI – Wisconsin

MD – Maryland ON – Ontario, Canada

CREDIT . . . . . . SALE

ACCOUNT Æ

Swipe DL Card ->

DRIVER LICENSE

1.General Report

2.Clerk Report

3.Supported States

4.Clear DL Data

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 24

Clear Driver License Data *

STEP ACTION DISPLAY

From the idle prompt, press the [F] key at

the same time as pressing the number

key for Driver License Verification.

Press the [BS] key to list the available

functions.

3. Press [4] to clear the Driver License Data.

4. The data will be cleared.

Stop.

CREDIT . . . . . . SALE

ACCOUNT Æ

Swipe DL Card ->

DRIVER LICENSE

1.General Report

2.Clerk Report

3.Supported States

4.Clear DL Data

DATA CLEARED

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 25

Quick Service Payment

INFORMATION QSP is used in Fast Food Restaurants, Parking Garages and Motion Picture Theaters

(Cinemas). This allows the acceptance of credit cards as the payment method without

requiring authorization, receipts or signatures. QSP supports swiped transactions only;

manual entry transactions are processed in the normal manner. This means that manual

entry transactions will contact the host for authorization and will print a receipt with a

signature line. Credit Card sales and voids are the only transaction types supported by

QSP. The Credit EDC capture type must be Terminal Based for QSP.

A Floor Limit can be specified for each function (authorization, receipt and signature) for

each card type to be processed. This must be specified in the file built for the specific

terminal and downloaded into the terminal. QSP Mode information is printed on the Print

Setup Report.

This function is available only when supported and requested by the Host

Processor. The capture type must be terminal based.

Please review the following chart of default Floor Limits:

CARD TYPE MERCHANT CATEGORY DEFAULT FLOOR LIMIT

MASTER CARD Fast Food Restaurant $25.00

MASTER CARD Parking Garage $50.00

MASTER CARD Cinema $35.00

VISA Restaurant (all types) $25.00

VISA Cinema $25.00

VISA Parking Garage/Lot

$75.00 for Authorization $150.00

for Signature and $25.00 for

Receipt

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 26

Processing a QSP Sale

STEP ACTION DISPLAY

1. Be sure the terminal is at the Idle Prompt

2. Swipe the credit card.

3. Input the dollar amount of the transaction without

a decimal point and press [ENTER]

If Then

The transaction amount is less than the

authorization floor limit:

The Host Processor will not be

contacted for authorization.

The transaction amount is greater than

the auth. floor limit:

The terminal will contact the Host for

authorization.

If Then

The transaction amount is less than the

receipt floor limit:

The terminal will display a “Print

Receipt?” prompt (see step #6).

The transaction amount is greater than

the floor limit: A receipt will be printed.

6. Press [ENTER] to print a receipt or [MENU/ESC]

for no receipt.

CREDIT …… SALE

ACCOUNT Æ

CREDIT …… SALE

AMOUNT 0.00

Print Receipt?

ENTR=YES, MENU=NO

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 27

Processing a QSP Sale, Continued

STEP ACTION DISPLAY

If Then

The transaction amount is less than the

signature floor limit:

The receipt will not have a signature

line.

The transaction amount is greater than

the signature floor limit: The receipt will have a signature line.

8. Press any key for second receipt to print.

9. Stop.

TEAR SLIP - - - ->

Press Any Key

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 28

Voiding a QSP Sale

STEP ACTION DISPLAY

From the Idle prompt press [VOID] until the display

identifies a Void/Sale.

(See right Î)

2. Swipe the credit card or key in the account number and expiration date manually.

3. Input the dollar amount to be voided then press [ENTER].

If Then

The transaction amount is less than the

receipt floor limit:

The terminal will display a “Print

Receipt?” prompt (see step #5).

The transaction amount is greater than

the floor limit: A receipt will be printed.

5. Press [ENTER] to print a receipt or [MENU/ESC]

for no receipt.

If Then

The transaction amount is less than the

signature floor limit:

The receipt will not have a signature

line.

The transaction amount is greater than

the signature floor limit: The receipt will have a signature line.

7. Press any key for second receipt to print.

8. Stop.

Print Receipt?

ENTR=YES,MENU=NO

TEAR SLIP - - - ->

Press Any Key

CREDIT . . . VOID/SALE

ACCOUNT Æ

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 29

Menu Options

INFORMATION The NURIT 8000 SECURE has a menu with several options that control many of

the terminal’s basic operational functions. The menu is divided into main menus

and sub-menus that can be accessed by pressing the [MENU/CANCEL] key.

Accessing the Main Menu

STEP ACTION DISPLAY

1. From the Idle Prompt press the

[MENU/CANCEL] key.

Use the [] and [] keys to scroll

through the options then press [ENTER]

to select.

Press the number on the keypad that

corresponds with your selection.

3. Press [MENU/CANCEL] to return to the idle CREDIT . . . . . . SALE prompt.

4. Stop.

CREDIT …… SALE

ACCOUNT Æ

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Option

4.Host Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 30

1. Reports

DESCRIPTION

The first menu is the Report Menu, which generates ten different types of reports:

 Default Report  Current Report  History Report  Display Transactions

 Receipt Copy  Performance  Tip Report  Report Setup

 RAM DISK Report *  Communication Log Report *

*NOTE: These features are available with the POS_PLUS application only.

REPORT

TYPES You will be prompted in some Report sub-menus to choose a report type. Below

is a list of report types and their definitions.

REPORT DEFINITION

CONDENSED

REPORT

This type of report will print the transaction number, card type,

transaction type, last four digits of the account number, and the

amount of the sale.

SHORT REPORT This type of report will print the transaction type and the

amount of the sale.

JOURNAL REPORT This type of report will print a full receipt style copy of each

transaction.

TOTALS ONLY This type of report will print daily totals only.

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 31

Print the Default Report

FUNCTION

DESCRIPTION

This is a report of the terminal's daily transactions, which has been customized, or

has set defaults from the Current Report (see Current Report on the following

page).

STEP ACTION DISPLAY

From the main MENU SCREEN press

[ENTER/CANCEL]

Press [1] to access the Reports Menu

2. Input the Password and press [ENTER].

3. From the Reports Menu Press [ENTER] OR Press [1] to select Default Report

4. Stop.

REPORTS:

1.Default Report

2.Current Report

3.History Report

4.Display Trans.

5.Last Receipt

6.Performance

7.Tip Report

8.Report Setup

9.NOS Menu

ENTER PASSWORD:

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 32

Print the Current Report

FUNCTION

DESCRIPTION

Current report will print the terminal's daily transactions, and can be customized

with specific options. This is where the Default Report is set.

STEP ACTION DISPLAY

From the Main Menu, press [1] to access

the Reports Menu.

Input the Password and press [ENTER].

2. Press [2] to select Current Report

Use the [] and [] keys to scroll

through the Report Type options then

press [ENTER] to select.

Press the number corresponding with

your selection.

Use the [] and [] keys to scroll

through the EDC Type options then press

[ENTER] to select.

Press the number corresponding with

your selection

Use the [] and [] keys to scroll

through the Card Type options then press

[ENTER] to select.

Press the number corresponding with

your selection

Continued on next page

CUR. REPORT TYPE

1.Condensed Rprt

2.Short Report

3.Journal Report

4. TOTALS ONLY

CHOOSE EDC TYPE

1.ALL

2.CREDIT

3.DEBIT

ENTER CARD TYPE

1.ALL

2.VISA

3.MasterCard

4.AMEX

5.Diners

6.CarteBlanch

7.Disc/NOVUS

8.enRoute

9.JCB

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

REPORTS:

1.Default Report

2.Current Report

3.History Report

4.Display Trans.

5.Last Receipt

6.Performance

7.Tip Report

8.Report Setup

9.RAMDISK Report

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 33

Print the Current Report, Continued

STEP ACTION DISPLAY

Use the [] and [] keys to scroll through

Sorting Options then press [ENTER] to

select.

Press the number corresponding with your

selection

Use the [] and [] keys to scroll through

the Transaction Type options then press

[ENTER] to select.

Press the number corresponding with your

selection

To Then

Save this

as your

default

report

Press

[ENTER]

Keep your

current

default

setting

Press [MENU]

9. Stop.

Set Cur. Defaults?

ENTR=YES,MENU=NO

SORT METHOD:

1.By Trans #

2.By Card Type

3.By Server ID

CHOOSE TRAN. TYPE

1.ALL

2.SALE

3.FORCED

4.VERIFY

5.RETURN

6.VOID/SALE

7.VOID/RTRN

8.VOID/FRCD

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 34

Print History Reports

FUNCTION

DESCRIPTION

This report will allow you to print previous batch totals for the last 300 batches.

You can print a total report of several batches, or you can print a report showing

totals per batch.

STEP ACTION DISPLAY

From the Main Menu, press [1] to access

the Reports Menu.

Input the Password and press [ENTER].

2. Press [3] to select History Report.

Using the numeric keypad input the batch

date you would like the report to begin

with.

Then press [ENTER]

Using the numeric keypad input the batch

date you would like the report to end with.

Then press [ENTER]

Use the [] and [] keys to select if you

would like the report by Total or Per Batch

then press [ENTER]

Press the number corresponding with

your selection

Continued on next page

From Batch Date:

10/01/02

To Batch Date:

10/15/02

HISTORY REPORTS

1.Total

2.Per Batch

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

REPORTS:

1.Default Report

2.Current Report

3.History Report

4.Display Trans.

5.Last Receipt

6.Performance

7.Tip Report

8.Report Setup

9.RAMDISK Report

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 35

Print History Reports, Continued

STEP ACTION DISPLAY

Use the [] and [] keys to scroll

through the EDC Type options then press

[ENTER] to select.

Press the number corresponding with

your selection

Use the [] and [] keys to scroll

through the Card Type options then press

[ENTER] to select.

Press the number corresponding with

your selection

Use the [] and [] keys to scroll

through the Transaction Type options

then press [ENTER] to select.

Press the number corresponding with

your selection

8. Stop.

CHOOSE EDC TYPE

1.ALL

2.CREDIT

3.DEBIT

ENTER CARD TYPE

1.ALL

2.VISA

3.MasterCard

4.AMEX

5.Diners

6.CarteBlanch

7.Disc/NOVUS

8.enRoute

9.JCB

CHOOSE TRAN. TYPE

1.ALL

2.TOTALS ONLY

3.SALE

4.FORCED

5.VERIFY

6.RETURN

7.VOID/SALE

8.VOID/RTRN

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 36

Display Transactions

FUNCTION

DESCRIPTION

This option will allow you to view daily transactions on the terminal

display. You can also print another receipt copy of the displayed

transaction or void that transaction.

STEP ACTION DISPLAY

From the Main Menu, press [1] to access

the Reports Menu.

Input the Password and press [ENTER].

2. Press [4] to select Display Trans.

Use the [] and [] keys to select the

method you would like to view the

transaction then press [ENTER].

Press the number corresponding with

your selection

Note: Subsequent prompts will vary with

this menu choice.

Use the [] and [] keys to scroll

through the EDC Type options then press

[ENTER] to select.

Press the number corresponding with

your selection

Continued on next page

Display Trans.

1.Scroll All

5.By Trans. #

6.By Card Type

7.By Card Num.

CHOOSE EDC TYPE

2.CREDIT

3.DEBIT

4.EBT

5.Cash

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

REPORTS:

1.Default Report

2.Current Report

3.History Report

4.Display Trans.

5.Last Receipt

6.Performance

7.Tip Report

8.Report Setup

9.RAMDISK Report

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 37

Display Transactions, Continued

STEP ACTION DISPLAY

If Then

You selected to

scroll through all

transaction

The first transaction will show on the display.

FORCED will allow you to scroll through the

transactions.

You selected to

view by

Transaction #

You will be prompted to input the Transaction #

You selected to

view by Card Type You will be prompted to select a card type

If you selected to

view by Card

Number

You will be prompted to enter the last four

digits of the card number.

To print another copy of the receipt for

this transaction press [ALPHA].

Note: Display will reflect your transaction.

To Void this transaction press [CLEAR].

Note: Display will reflect your transaction.

8. Press [ENTER].

9. Stop.

#0001 SL 12.00

MasterCard 0805

123456

5454123456789876

#0001 SL 12.00

MasterCard 0805

123456

5454123456789876

Void Trans #1?

ENTR=YES,MENU=NO

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 38

Receipt Copy

FUNCTION

DESCRIPTION

This option will print a Merchant’s copy (full account number and signature line) of

the last transaction, a Customer copy (truncated account number) of the last

transaction or a copy (Customer) of any receipt. If any function was executed

after the transaction, the last receipt function cannot be accessed; the any receipt

function must be used.

STEP ACTION DISPLAY

From the Main Menu, press [1] to access

the Reports Menu.

Input the Password and press [ENTER].

2. Press [5] to select Receipt Copy.

3. Press the number that corresponds to the

type of receipt required.

If Any Receipt was selected, choose the

EDC type by pressing the corresponding

number.

Note: Display will reflect terminal setup.

5. Enter the number of the transaction

requiring the receipt then press [ENTER].

6. Stop.

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

REPORTS:

1.Default Report

2.Current Report

3.History Report

4.Display Trans.

5.Last Receipt

6.Performance

7.Tip Report

8.Report Setup

9.RAMDISK Report

RECEIPT COPY:

1.Last Cust. Rcpt

2.Any Receipt

3.Last Mrch. Rcpt

CHOOSE EDC TYPE

2.CREDIT

3.DEBIT

4.CASH

CHOOSE EDC TYPE

2.CREDIT

3.DEBIT

4.CASH

Transaction # ?

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 39

Print the Performance Report

FUNCTION

DESCRIPTION

This option will print a report listing the percentages of denials, approvals, swipes,

manual entries, etc.

STEP ACTION DISPLAY

From the Main Menu, press [1] to access

the Reports Menu.

Input the Password and press [ENTER].

2. Press [6] to select Performance.

Use the [] and [] keys to scroll

through the EDC Type options then press

[ENTER] to select.

Press the number corresponding with

your selection.

The Performance Report will print.

To Then

Reset the

Performance

Report

Press

[ENTER]

*You will be

prompted to

input the

password

Keep the

Default

Report data

Press

[MENU]

5. Stop.

Reset perf rprt?

ENTR=YES, MENU=NO

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

REPORTS:

1.Default Report

2.Current Report

3.History Report

4.Display Trans.

5.Last Receipt

6.Performance

7.Tip Report

8.Report Setup

9.RAMDISK Re

port

CHOOSE EDC TYPE

2.CREDIT

3.DEBIT

4.EBT

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 40

Tip Report

FUNCTION

DESCRIPTION This option will print a report that provides tip detail by server number.

STEP ACTION DISPLAY

From the Main Menu, press [1] to access

the Reports Menu.

Input the Password and press [ENTER].

2. Press [7] to select Tip Report.

Press [1] to view report for ALL servers

Press [2] to view report for a specific

server.

Use the [] and [] keys to scroll

through the EDC Type options then press

[ENTER] to select.

Press the number corresponding with

your selection

Use the [] and [] keys to scroll

through the Card Type options then press

[ENTER] to select.

Press the number corresponding with

your selection

Continued on next page.

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

REPORTS:

1.Default Report

2.Current Report

3.History Report

4.Display Trans.

5.Last Receipt

6.Performance

7.Tip Report

8.Report Setup

9.RAMDISK Report

CHOOSE SERVER

1. ALL

2.Specific Servr

CHOOSE EDC TYPE

1.ALL

2.CREDIT

3.DEBIT

4.EBT

5.CASH

ENTER CARD TYPE

1.ALL

2.VISA

3.MasterCard

4.AMEX

5.Diners

6.CarteBlanch

7.Disc/NOVUS

8.enRoute

9.JCB

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 41

Tip Report, Continued

STEP ACTION DISPLAY

To Then

Save this as

your default

report

Press

[ENTER]

Keep your

current

default

setting

Press

[MENU]

7. Stop. The report will begin printing.

Set Cur. Defaults?

ENTR=YES, MENU=NO

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 42

Report Set up – Printing Visa/MC Options

FUNCTION

DESCRIPTION

This function allows the option of having Visa and MasterCard print together

(default) or separately. The report must be sorted by card type for the Visa and

MasterCard transactions to be separate.

STEP ACTION DISPLAY

From the Main Menu, press [1] to access

the Reports Menu.

Input the Password and press [ENTER].

2. Press [8] to select Report Setup.

3. Press [ENTER] to select

1. Visa/MasterCard Setup

Use the [] and [] keys to select if you

would like Visa and MasterCard printing

together or separately then press

[ENTER].

Press the number corresponding with

your selection

5. Stop.

Vis/Mastr Setup

1.Separately

2.Together

Report Setup

1.Vis/Mastr Setp

2.Tip Discount

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

REPORTS:

1.Default Report

2.Current Report

3.History Report

4.Display Trans.

5.Last Receipt

6.Performance

7.Tip Report

8.Report Setup

9.RAMDISK Report

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 43

Report Setup – Tip Discount

FUNCTION

DESCRIPTION

This menu options allows the tip discount percentage to be set. This function

applies to restaurant mode only. Tip Discount must be enabled in the individual

tip areas to take affect.

STEP ACTION DISPLAY

From the Main Menu, press [1] to access

the Reports Menu.

Input the Password and press [ENTER].

2. Press [8] to select Report Setup.

3. Press [ENTER] to select

2. Tip Discount

Use the [] and [] keys to scroll

through the Card Type options then press

[ENTER] to select.

Press the number corresponding with

your selection.

Input the percent (%) amount then press

[ENTER]

Note: Be sure whole percents are to the left of

the decimal point.

6. Stop.

Tips % Discount

0.00

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

REPORTS:

1.Default Report

2.Current Report

3.History Report

4.Display Trans.

5.Last Receipt

6.Performance

7.Tip Report

8.Report Setup

9.RAMDISK Report

Report Setup

1.Vis/Mastr Set

2.Tip Discount

SELECT CARD TYPE

1.ALL

2.VISA

3.MasterCard

4.AMEX

5.Diners

6.CarteBlanch

7.Disc/NOVUS

8.enRoute

9.JCB

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 44

RAM Disk Report

FUNCTION

DESCRIPTION

A report listing the record size and maximum number of transactions for each EDC

type is printed via this function.

NOTE: This feature is available with POS_PLUS application only.

STEP ACTION DISPLAY

From the Main Menu, press [1] to access

the Reports Menu.

Input the Password and press [ENTER].

2. Press [9] to select RAMDISK Report.

3. The RAMDISK Report will print.

4. Stop.

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

REPORTS:

1.Default Report

2.Current Report

3.History Report

4.Display Trans.

5.Last Receipt

6.Performance

7.Tip Report

8.Report Setup

9.RAMDISK Report

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 45

Communication Log Report

FUNCTION

DESCRIPTION

Use this function to print a communication log of the last transaction or batch

processed or to clear the log.

NOTE: This feature is available with POS_PLUS application only.

STEP ACTION DISPLAY

From the Main Menu, press [1] to access

the Reports Menu.

Input the Password and press [ENTER].

Use the [] key to scroll to menu option

10. ComLog Rprt and then press

[ENTER].

Press [1] to print the current

communication log or press [2] to clear

the communication log information.

4. Stop.

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

REPORTS:

2.Current Report

3.History Report

4.Display Trans.

5.Last Receipt

6.Performance

7.Tip Report

8.Report Setup

9.RAMDISK Report

10.ComLog Rprt

ComLog Report

1.ComLog Print

2.ComLog Clear

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 46

2. Merchant Parameters

DESCRIPTION

This menu contains nine different functions that can be changed manually.

They are:

 Authorizations  Security Level  Edit Header

 Edit Trailer  Set Cash EDC  Merchant Fee

 Set Batch Time  Server/Invoice  Site ID

Authorizations – TRANSACTION TYPE

FUNCTION

DESCRIPTION

This function allows specific transaction types to be enabled and disabled. For

example, Voids, Returns, Forced Sales, etc. can be turned off or on.

STEP ACTION DISPLAY

1. From the Main MENU SCREEN press [2]

to access Merchant Parameters

2. Press [1] to access Authorizations

3. Input the Password and press [ENTER]

4. Press [1] to edit authorization for

Transaction Types.

Continued on next page

MERCHANT PARAMS

1.Authorizations

2.Security Level

3.Edit Header

4.Edit Trailer

5.Set Cash EDC

6.Merchant Fee

7.Set Batch Time

8.Srvr/Clrk/Invoice

9. Site ID

AUTHORIZATION

1.Trans. Types

2.Card Types

3.Debit Prompt

ENTER PASSWORD:

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 47

Authorizations – Transaction Type, Continued

STEP ACTION DISPLAY

Use the [] and [] keys to scroll

through the EDC Type options then press

[ENTER] to select.

Press the number corresponding with

your selection.

Use the [] and [] keys to select the

Transaction Type then press [ENTER].

Press the number corresponding with

your selection.

Use the [] and [] keys to select

Enable, Disable or Manager Only for the

Transaction Type then press [ENTER].

Press the number corresponding with

your selection

8. Stop.

CREDIT FORCED

1.Disabled

2.Always Enable

3.Manager Only

CHOOSE EDC TYPE

2.CREDIT

3.DEBIT

4.EBT

CREDIT

1. FORCED (EN)

2. VERIFY (EN)

3. RETURN (EN)

4. VOID/SALE (EN)

5. VOID/RTRN (EN)

6. VOID/FRCD (EN)

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 48

Authorizations – Card Type

FUNCTION

DESCRIPTION

This function allows specific card types to be enabled and disabled. For example,

Visa, MasterCard, Discover, Amex, etc. can be turned off or on.

STEP ACTION DISPLAY

1. From the Main MENU SCREEN press [2]

to access Merchant Parameters

2. Press [1] to access Authorizations.

3. Input the Password and press [ENTER].

4. Press [2] to edit authorization for Card

Types.

Use the [] and [] keys to scroll

through the Card Type options then

press [ENTER] to select.

Press the number corresponding with

your selection

Continued on next page

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

MERCHANT PARAMS

1.Authorizations

2.Security Level

3.Edit Header

4.Edit Trailer

5.Set Cash EDC

6.Merchant Fee

7.Set Batch Time

8. Srvr/Clrk/Invoice

9. Site ID

ENTER PASSWORD:

AUTHORIZATION

1.Trans. Types

2.Card Types

3.Debit Prompt

Choose Card Typ

1.VISA +

2.MasterCard +

3.AMEX +

4.Diners +

5.CarteBlanch +

6.Disc/NOVUS +

7.enRoute +

8.JCB +

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 49

Authorizations – Card Type, Continued

STEP ACTION DISPLAY

Use the [] and [] keys to select

Enable or Disable for the Card Type then

press [ENTER].

Press the number corresponding with

your selection

‘+’ indicates enabled and

‘-‘ indicates disabled.

7. Stop.

Authorizations – Debit Prompt

FUNCTION

DESCRIPTION

This function prompts the user the choose CREDIT or DEBIT when a credit card

is swiped and the payment type is CREDIT.

STEP ACTION DISPLAY

1. From the Main MENU SCREEN press [2]

to access Merchant Parameters

2. Press [1] to access Authorizations

Continued on next page

VISA +

1.Disabled

2.Always Enable

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

MERCHANT PARAMS

1.Authorizations

2.Security Level

3.Edit Header

4.Edit Trailer

5.Set Cash EDC

6.Merchant Fee

7.Set Batch Time

8 Srvr/Clrk/Invoice

9. Site ID

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 50

Authorizations – Debit Prompt, Continued

STEP ACTION DISPLAY

3. Input the Password and press [ENTER]

4. Press [3] to select 3. Debit Prompt

5. Press [1] to turn Debit Prompt OFF or

press [2] to turn Debit Prompt ON.

6. Stop.

ENTER PASSWORD:

AUTHORIZATION

1.Trans. Types

2.Card Types

3.Debit Prompt

DEBIT PROMPT

1.OFF

2.ON

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 51

Security Levels

FUNCTION

DESCRIPTION

This option allows merchants to set security levels for the Main Menu, Batching,

Card Security, Manual Entry of a credit card, and printing format of a credit card

number.

STEP ACTION DISPLAY

1. From the Main MENU SCREEN press [2]

to access Merchant Parameters

2. Press [2] to access Security Level

Use the [] and [] keys to select the

option you are editing security for and

then press [ENTER].

Press the number corresponding with

your selection

Use the [] and [] keys to Enable the

function or set security to Manager Only

then press [ENTER].

Press the number corresponding with

your selection

5. Stop.

FUNCTION OPTIONS

Menu Always Enabled and Manager Only

Batch Always Enabled and Manager Only

Print Account Always Full, Full on Report and Always Short

Secure Card No Security, Last 4 Digits and All Digits

Card Manual Entry

(Password Protected) Disabled and Always Enabled

Batch:

1.Always Enable

2.Manager Only

SECURITY SWITCH

1.Menu

2.Batch

3.Print Account

4.Secure Card

5.Crd Man. Entry

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

MERCHANT PARAMS

1.Authorization

2.Security Level

3.Edit Header

4.Edit Trailer

5.Set Cash EDC

6.Merchant Fee

7.Set Batch Time

8. Srvr/Clrk/Invoice

9. Site ID

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 52

Edit Header/Trailer

FUNCTION

DESCRIPTION

The receipt header and trailer can be changed manually through the terminal. A

specific line, character, or entire header/trailer can be changed, if needed.

Both Header and Trailer are composed of five lines, 24 characters per line.

STEP ACTION DISPLAY

1. From the Main MENU SCREEN press [2]

to access Merchant Parameters

Press [3] to Edit the Receipt Header

Press [4] to Edit the Receipt Trailer

3. Input in the text that you want printed out

on the receipt. (See instructions below)

To change the letters, first press the number key that corresponds with

the desired letter then press the [ALPHA] key and the [F] key

simultaneously to cycle through the other characters also on that key

For example:

The #2 key on the keypad also has the letters A, B and Cprinted on it.

When you first press this key, the display will show the number 2, by

pressing the [ALPHA] key and the [F] key simultaneously it will

cause the display to change from 2 to the letter A, press [ALPHA] and

[2] again and then it becomes a B and finally C before starting all over

again back to the number 2.

5. Press and hold the [F] key then tap the [9] to move the cursor to the right.

Press and hold the [F] key then tap the [8] to move the cursor to the left.

Press [] to scroll to the next line.

Continued on next page.

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

MERCHANT PARAMS

1.Authorization

2.Security Level

3.Edit Header

4.Edit Trailer

5.Set Cash EDC

6.Merchant Fee

7.Set Batch Time

8. Srvr/Clrk/Invoice

9. Site ID

Header Text 1 N

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 53

Edit Header/Trailer, Continued

STEP ACTION DISPLAY

When all information has been

entered/edited press [MENU] to

complete process.

If prompted, press [ENTER] to save your

changes.

7. Stop.

SAVE CHANGES?

ENTR=YES, MENU=NO

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 54

Set Cash EDC

FUNCTION

DESCRIPTION

Cash will be an addition to your Payment Modes, and will record cash

transactions when this option is enabled. No batching or transfer of money is

part of this process. Cash EDC is used only to track cash transactions.

STEP ACTION DISPLAY

1. From the Main MENU SCREEN press [2]

to access Merchant Parameters

2. Press [5] to Set Cash EDC

3. Input the Password and press [ENTER]

Press [1] to Set EDC With Cash

Press [2] to Set EDC Without Cash

5. Stop.

CASH EDC SET:

1.WITH CASH

2.WITHOUT CASH

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

MERCHANT PARAMS

1.Authorization

2.Security Level

3.Edit Header

4.Edit Trailer

5.Set Cash EDC

6.Merchant Fee

7.Set Batch Time

8. Srvr/Clrk/Invoice

9. Site ID

ENTER PASSWORD:

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 55

Setting the Merchant Fee

FUNCTION

DESCRIPTION

Use this function to add a Merchant Fee to a debit transaction.

STEP ACTION DISPLAY

1. From the Main MENU SCREEN press [2]

to access Merchant Parameters

2. Press [6] for Merchant Fee.

3. Input the Password and press [ENTER]

4. Input the Merchant Fee then press

[ENTER]

5. Press [ENTER]

Continued on next page

Merch Fee: $0.00

New Rate: 0.00

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

MERCHANT PARAMS

1.Authorization

2.Security Level

3.Edit Header

4.Edit Trailer

5.Set Cash EDC

6.Merchant Fee

7.Set Batch Time

8. Srvr/Clrk/Invoice

9. Site ID

ENTER PASSWORD:

ARE YOU SURE

ENTR=YES, MENU=NO

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 56

Setting the Merchant Fee, Continued

STEP ACTION DISPLAY

6. Press [ENTER] to add fee to CashBack

transactions only or [MENU] to add fee to

all debit transactions.

7. Stop.

Set Batch Time

FUNCTION

DESCRIPTION

This option will allow the batch time in the terminal to be set for a specific time.

This is used on AUTOBATCH terminals only. Set Batch Time will print a batch

report and will not actually dial to batch.

STEP ACTION DISPLAY

1. From the Main MENU SCREEN press [2]

to access Merchant Parameters

2. Press [7] to set the Autobatch Batch

Time

3. Input the Password and press [ENTER]

Continued on next page

On CashBack Only

ENTR=YES, MENU=NO

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

MERCHANT PARAMS

1.Authorizations

2.Security Level

3.Edit Header

4.Edit Trailer

5.Set Cash EDC

6.Merchant Fee

7.Set Batch Time

8 Srvr/Clrk/Invoice

9. Site ID

ENTER PASSWORD:

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 57

Set Batch Time, Continued

STEP ACTION DISPLAY

4. Input the desired time in military time

(24 hour) and press [ENTER]

5. If the terminal was programmed with more than one Autobatch EDC, you will

be prompted to choose host before setting the batch time.

6. Stop.

SET BATCH TIME:

05:30

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 58

Server ID/Clerk ID/Invoice Mode

FUNCTION

DESCRIPTION

This will allow the terminal to prompt for a server/clerk ID, invoice

number, or both. For Retail terminals with no Tip active, the function is

Clerk ID. For a Retail terminal with at least one Tip active or a

Restaurant terminal, the function is Server ID.

If Server/Clerk ID Mode is activated, up to 100 ID/name designations

can be entered and stored in the terminal. When storing the

number/name designations, the server numbers are restricted to from

1 to 100.

STEP ACTION DISPLAY

1. From the Main MENU SCREEN press [2]

to access Merchant Parameters

2. Press [8] for Server/Invoice Mode.

3. Input the Password and press [ENTER]

Use the [] and [] keys to select OFF

or ON and then press [ENTER].

Press the number corresponding with

your selection.

NOTE:Display will change to reflect

Retail or Restaurant configuration.

Continued on next page.

SERVER ID MODE:

1.OFF

2.ON

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

MERCHANT PARAMS

1.Authorization

2.Security Level

3.Edit Header

4.Edit Trailer

5.Set Cash EDC

6.Merchant Fee

7.Set Batch Time

8. Srvr/Clrk/Invoice

9. Site ID

ENTER PASSWORD:

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 59

Server ID/Clerk ID/Invoice Mode, Continued

STEP ACTION DISPLAY

Enter the Server ID number a name is to

be assigned to then press [ENTER].

Press [MENU] to bypass.

Using the method described in Editing

Header, enter the 19-character name.

Press [ENTER] when the name has been

entered.

Continue in this manner until all server

names have been entered. Press

[MENU] to accept the entered names and

continue to Invoice Mode.

Use the [] and [] keys to select OFF

or ON then press [ENTER].

Press the number corresponding with

your selection.

9. Note: In the Restaurant application, there are two more options after Invoice;

Table #’s and Guest #’s.

10. Stop.

Srv #1 Name: 1 N

INVOICE MODE:

1.OFF

2.ON

Srv #14 Name: 1 N

ALICE

ENTER SERVER ID

SERVER ID MODE:

1.OFF

2.ON

ENTER SERVER ID

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 60

Site ID

FUNCTION

DESCRIPTION

This option is used mainly for programming purposes, it allows customer

service to view, or change the terminal number.

STEP ACTION DISPLAY

1. From the Main MENU SCREEN press [2]

to access Merchant Parameters

2. Press [9] to access Site ID

The UNIQUE and current Site ID used to

program the terminal will display.

Press [ENTER] to change the ID.

4. Input the Password and Press [ENTER]

5. Enter the new Site ID then press

[ENTER].

6. Stop.

CHANGE SITE ID?

0000100

ENTER PASSWORD:

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

MERCHANT PARAMS

1.Authorization

2.Security Level

3.Edit Header

4.Edit Trailer

5.Set Cash EDC

6.Merchant Fee

7.Set Batch Time

8.Server ID/Invoice

9. Site ID

Enter Site ID

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 61

3. Merchant Options

DESCRIPTION

This Main Menu has fifteen options that can be enabled or disabled manually

through the terminal.

 Paper Type  No-Paper Mode  Buzzer Set  Operation Mode

 Battery Saver  Print Disclaimer  Set Menu Type  Set Halo

 Print Setup  Store & Forward  Check Reader  Sign Option *

 Bridge Comm *  Language Setup *

*NOTE: These features are available with the POS_PLUS application only.

Paper Type

FUNCTION

DESCRIPTION

This option sets the paper type to single ply, double ply, or customized.

Single ply prints two receipts (for credit by default, also for debit and EBT if

specified in the terminal file), double ply prints one receipt (with account

truncation) and customized prints two receipts for all payment modes.

STEP ACTION DISPLAY

1. From the Main Menu Press [3] to access

Merchant Options

2. Press [ENTER] for Paper Type

Use the [] and [] keys to highlight

your selection and then press [ENTER].

Press the number corresponding with

your selection.

4. Stop.

MERCH. OPTIONS

1.Paper Type

2.No-Paper Mode

3.Buzzer Set

4.Operation Mode

5.Battery Saver

6.Prt Disclaimer

7.Set Menu Type

8.Set Halo

9.Print Setu

PAPER TYPE

1.Single Ply

2.Double Ply

3.Customized

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 62

Buzzer Set

FUNCTION

DESCRIPTION Enables or disables tone when performing certain terminal functions.

STEP ACTION DISPLAY

1. From the Main Menu Press [3] to access

Merchant Options

2. Press [3] for Buzzer Set

Use the [] and [] keys to your

selection and then press [ENTER].

Press the number corresponding with

your selection.

4. Stop.

BUZZER SET:

1.OFF

2.ON

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

MERCH. OPTIONS

1.Paper Type

2.No-Paper Mode

3.Buzzer Set

4.Operation Mode

5.Battery Saver

6.Prt Disclaimer

7.Set Menu Type

8.Set Halo

9.Print Setu

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 63

Operation Mode

FUNCTION

DESCRIPTION

This option allows the terminal to be set at two different modes, Normal or Demo

(Demo mode for training; Normal mode for live transactions). If the terminal is set in

Demo mode for training purposes, you must revert back to Normal mode for live

transactions.

STEP ACTION DISPLAY

1. From the Main Menu Press [3] to access

Merchant Options

2. Press [4] for Operation Mode

Use the [] and [] keys to your

selection and then press [ENTER].

Press the number corresponding with

your selection.

4. Press [ENTER] to execute change.

5. Stop.

OPERATION MODE:

1.Demo Mode

2.Normal Mode

ARE YOU SURE?

ENTR=YES, MENU=NO

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

MERCH. OPTIONS

1.Paper Type

2.No-Paper Mode

3.Buzzer Set

4.Operation Mode

5.Battery Saver

6.Prt Disclaimer

7.Set Menu Type

8.Set Halo

9.Print Setu

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 64

Battery Saver

FUNCTION

DESCRIPTION This option puts terminal in a standby mode. It can be enabled or disabled.

STEP ACTION DISPLAY

1. From the Main Menu Press [3] to access

Merchant Options

2. Press [5] for Battery Saver

Use the [] and [] keys to your

selection and then press [ENTER].

Press the number corresponding with

your selection.

4. Press [ENTER] to execute change.

Input the seconds that should elapse

prior to the battery saver being initiated.

Then press [ENTER]

6. Stop.

Continued on next page.

BATT SAVER ~ ON

1. OFF

2. Auto Off Only

3. Radio Only

4. Radio+Auto Off

ARE YOU SURE?

ENTR=YES, MENU=NO

IDLE TIME: [sec]

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

MERCH. OPTIONS

1.Paper Type

2.No-Paper Mode

3.Buzzer Set

4.Operation Mode

5.Battery Saver

6.Prt Disclaimer

7.Set Menu Type

8.Set Halo

9.Print Setu

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 65

Battery Saver, Continued

OPTION DEFINITION

Off This option turns the battery saver off.

Radio Only This option will shut off only the radio after a specific amount

of time is set in terminal.

Radio + Auto Off This shuts the radio and terminal off after a specific amount of

time set in terminal.

Auto Off Only With this option only the terminal will shut off after a specific

amount of time set in the terminal. The Radio will stay on.

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 66

Prints Disclaimer

FUNCTION

DESCRIPTION

This option will print the following statement at the end of a credit card

transaction:

“I AGREE TO PAY ABOVE TOTAL AMOUNT ACCORDING TO CARD ISSUER

AGREEMENT (MERCHANT AGREEMENT IF CREDIT VOUCHER).”

STEP ACTION DISPLAY

1. From the Main Menu Press [3] to access

Merchant Options.

2. Press [6] for Print Disclaimer.

Press [1] to turn the Disclaimer Off

Press [2] to turn the Disclaimer On

4. Stop.

PRT DSCLMR1 MODE

1.OFF

2.ON

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

MERCH. OPTIONS

1.Paper Type

2.No-Paper Mode

3.Buzzer Set

4.Operation Mode

5.Battery Saver

6.Prt Disclaimer

7.Set Menu Type

8.Set Halo

9.Print Setu

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 67

Set Menu Type

FUNCTION

DESCRIPTION The menu in the terminal can be set to scroll automatically, or manually.

STEP ACTION DISPLAY

1. From the Main Menu Press [3] to access

Merchant Options

2. Press [7] to Set Menu Type

Use the [] and [] keys to find your

selection and then press [ENTER].

Press the number corresponding with

your selection.

4. Note: If auto scroll is selected the terminal will prompt you for scroll speed

(1/fastest-9/slowest). Type in a speed and press [ENTER].

5. Stop.

CHOOSE MENU TYPE

1.Auto Scroll

2.Manual Scroll

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

MERCH. OPTIONS

1.Paper Type

2.No-Paper Mode

3.Buzzer Set

4.Operation Mode

5.Battery Saver

6.Prt Disclaimer

7.Set Menu Type

8.Set Halo

9.Print Setu

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 68

Set Halo

FUNCTION

DESCRIPTION

This option sets a limit that cannot be exceeded. This option can be set for sales,

refunds, and/or cash back.

STEP ACTION DISPLAY

1. From the Main Menu press [3] to access

Merchant Options.

2. Press [8] to Set Halo.

3. Input the Password and Press [ENTER]

Use the [] and [] keys to find your

selection and then press [ENTER].

Press the number corresponding with

your selection

Note: If option 1 is selected, continue with step 6.

5. Input the maximum amount for a sale

then press [ENTER].

Continued on next page

ENTER PASSWORD:

HALO FOR SALE:

1.OFF

2.ON

HALO: $0.00

NEW RATE: $0.00

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

MERCH. OPTIONS

1.Paper Type

2.No-Paper Mode

3.Buzzer Set

4.Operation Mode

5.Battery Saver

6.Prt Disclaimer

7.Set Menu Type

8.Set Halo

9.Print Setu

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 69

Set Halo, Continued

STEP ACTION DISPLAY

6. Repeat steps 4 and 5 for Return Halo and

Cash Back Halo.

7. Stop.

HALO FOR RETURN:

1.OFF

2.ON

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 70

Print Setup

FUNCTION

DESCRIPTION

This option will print a setup report. It will show application information, the

terminal header and trailer, signature capture mode if enabled, list all card types

showing enabled (+) or disabled (-), menu security, card security, paper type,

merchant fee, PIN pad information, server mode, invoice mode, report setup,

HALO settings working mode information, comment line, transaction type settings

and the Hot Key list.

STEP ACTION DISPLAY

1. From the Main Menu Press [3] to access

Merchant Options

2. Press [9] to Print the terminal Setup

3. Input the Password and press [ENTER].

4. Stop.

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

MERCH. OPTIONS

1.Paper Type

2.No-Paper Mode

3.Buzzer Set

4.Operation Mode

5.Battery Saver

6.Prt Disclaimer

7.Set Menu Type

8.Set Halo

9.Print Setu

ENTER PASSWORD:

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 71

Store & Forward

FUNCTION

DESCRIPTION

Store & Forward (Offline Mode) will give the following six different options:

 Mode Select  Display Transactions

 Reports  Upload Transactions

 Resend Failed  Delete Failed

Turning Store & Forward On/Off

STEP ACTION DISPLAY

1. From the Main Menu Press [3] to access

Merchant Options

2. Use the [] key to scroll to menu option

10. Store & Forward and then press

[ENTER].

3. Input the Password and Press [ENTER]

4. Press [1] for S&F On/Off

Continued on next page

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

MERCH. OPTIONS:

2.No-Paper Mode

3.Buzzer Set

4.Operation Mode

5.Battery Saver

6.Prt Disclaimer

7.Set Menu Type

8.Set Halo

9.Print Setup

10.Store&Forward

ENTER PASSWORD:

STORE&FORWARD

1.S&F On/Off

2.Mode Select

3.Display Trans

4.Reports

5.Upload Transct

6.Resend Failed

7.Delete Failed

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 72

Turning Store & Forward On/Off, Continued

STEP ACTION DISPLAY

If Store & Forward is ON, [ENTER] will

turn it OFF. If Store & Forward is OFF,

[ENTER] will turn it ON.

6. Stop.

Mode Select

STEP ACTION DISPLAY

1. From the Main Menu Press [3] to access

Merchant Options

2. Use the [] key to scroll to menu option

10. Store & Forward and then press

[ENTER].

3. Input the Password and Press [ENTER]

Continued on next page

Store & Forward

Switch ON?

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

MERCH. OPTIONS

2.No-Paper Mode

3.Buzzer Set

4.Operation Mode

5.Battery Saver

6.Prt Disclaimer

7.Set Menu Type

8.Set Halo

9.Print Setup

10.Store&Forward

ENTER PASSWORD:

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 73

Mode Select, Continued

STEP ACTION DISPLAY

4. Press [2] for Mode Select.

Use the [] and [] keys to find your

selection and then press [ENTER].

Press the number corresponding with

your selection.

NOTE:See list of definitions on next page.

6. Press [ENTER]

Enter the maximum amount to be

accepted for all Visa transactions then

press [ENTER]. For no limit, press

[ENTER] with no max amount entered.

8. Continue for all credit card types.

Enter the maximum amount to be

accepted for all transactions in total then

press [ENTER]. For no limit, press

[ENTER] with no max amount entered.

10. A report listing the individual card and total limit will be printed.

11. Stop.

Continued on next page.

MODE SELECT:

1.Stay Online

2.Stay Offline

3.Off Until Btch

4.OfflineOnDmnd

STORE&FORWARD

1.S&F On/Off

2.Mode Select

3.Display Trans

4.Reports

5.Upload Transct

6.Resend Failed

7.Delete Failed

LIMIT PER CARD ?

Accept?ENTER=Yes

ENTER MAX AMOUNT

VISA 0.00

ENTER MAX TOTAL

0.00

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 74

Mode Select, Continued

OPTION DEFINITION

STAY ONLINE The Terminal will process transactions only via radio/CDPD signal

or phone line

STAY OFFLINE The Terminal will process transactions via Offline only, it will not

look for signal or phone line.

OFF UNTIL

BATCH

The Terminal will process transactions via Offline only. When the

[BATCH] key is pressed, the terminal will switch to Online and

transmit all the transactions.

OFFLINE ON

DEMAND

Terminal will process via Online. If no radio/CDPD signal is

obtained, and no phone line is connected, the terminal will prompt:

RETRY OR PROCESS OFFLINE?

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 75

Display Transactions

FUNCTION

DESCRIPTION

Allows you to view “STORED” or “FAILED” transactions, by scrolling through

all transactions, by transaction# OR server# (if server mode is on).

STEP ACTION DISPLAY

From the Main Menu Press [3] to access

Merchant Options

Use the [] key to scroll to menu option

10. Store & Forward and then press

[ENTER].

Input the Password and Press [ENTER]

4. Press [3] for Display Trans

Continued on next page

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

MERCH. OPTIONS

2.No-Paper Mode

3.Buzzer Set

4.Operation Mode

5.Battery Saver

6.Prt Disclaimer

7.Set Menu Type

8.Set Halo

9.Print Setup

10.Store&Forward

ENTER PASSWORD:

STORE&FORWARD

1.S&F On/Off

2.Mode Select

3.Display Trans

4.Reports

5.Upload Transct

6.Resend Failed

7.Delete Failed

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 76

Display Transactions, Continued

STEP ACTION DISPLAY

Use the [] and [] keys to find your

selection and then press [ENTER].

Press the number corresponding with

your selection.

Use the [] and [] keys to find your

selection and then press [ENTER].

Press the number corresponding with

your selection.

7. Stop.

DISPLAY TRANS.

1.Scroll All

5.By Trans. #

CHOOSE DATABASE

1.STORED

2.FAILED

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 77

Reports – Store & Forward

FUNCTION

DESCRIPTION

There are three options for Store & Forward Reports:

 1. Print Status  2. Print Offline  3. Print Failed

STEP ACTION DISPLAY

1. From the Main Menu Press [3] to access

Merchant Options

2. Use the [] key to scroll to menu option

10. Store & Forward and then press

[ENTER].

3. Input the Password and Press [ENTER]

4. Press [4] for Reports

Continued on next page

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

MERCH. OPTIONS

2.No-Paper Mode

3.Buzzer Set

4.Operation Mode

5.Battery Saver

6.Prt Disclaimer

7.Set Menu Type

8.Set Halo

9.Print Setup

10.Store&Forward

ENTER PASSWORD:

STORE&FORWARD

1.S&F On/Off

2.Mode Select

3.Display Trans

4.Reports

5.Upload Transct

6.Resend Failed

7.Delete Failed

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 78

Reports – Store & Forward, Continued

STEP ACTION DISPLAY

Use the [] and [] keys to find your

selection and then press [ENTER].

Press the number corresponding with

your selection.

Note: See option Definitions below.

6. Stop.

OPTION DEFINITION

Print Status A print out of the terminal’s status, i.e.:

Offline Mode or Online Mode.

Print Offline A report of all transactions entered into the

database in Offline Mode.

Print Failed A report of all transactions that failed and

were stored.

REPORTS

1.Print Status

2.Print Offline

3.Print Failed

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 79

Upload Transactions

FUNCTION

DESCRIPTION

This function allows you to upload all Offline transactions one

by one, or all at once. If any transactions have failed the

terminal will prompt: PRINT FAILED TRANS?

STEP ACTION DISPLAY

1. From the Main Menu Press [3] to access

Merchant Options

2. Use the [] key to scroll to menu option

10. Store & Forward and then press

[ENTER].

3. Input the Password and Press [ENTER]

4. Press [5] to Upload Transactions

Press [MENU] to upload individual

transactions

Press [ENTER] to upload all offline

transactions

6. Terminal will contact the host, receive response and print receipts.

7. Stop.

UPLOAD TRANSCT

ONE=MENU ALL=ENT

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

MERCH. OPTIONS

2.No-Paper Mode

3.Buzzer Set

4.Operation Mode

5.Battery Saver

6.Prt Disclaimer

7.Set Menu Type

8.Set Halo

9.Print Setup

10.Store&Forward

ENTER PASSWORD:

STORE&FORWARD

1.S&F On/Off

2.Mode Select

3.Display Trans

4.Reports

5.Upload Transct

6.Resend Failed

7.Delete Failed

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 80

Resend Failed Transactions

FUNCTION

DESCRIPTION This function allows you to resend any failed transactions.

STEP ACTION DISPLAY

1. From the Main Menu Press [3] to access

Merchant Options

2. Use the [] key to scroll to menu option

10. Store & Forward and then press

[ENTER].

3. Input the Password and press [ENTER]

4. Press [6] to Resend Failed Transactions.

5. Stop.

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

MERCH. OPTIONS

2.No-Paper Mode

3.Buzzer Set

4.Operation Mode

5.Battery Saver

6.Prt Disclaimer

7.Set Menu Type

8.Set Halo

9.Print Setup

10.Store&Forward

ENTER PASSWORD:

STORE&FORWARD

1.S&F On/Off

2.Mode Select

3.Display Trans

4.Reports

5.Upload Transct

6.Resend Failed

7.Delete Failed

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 81

Delete Failed Transactions

FUNCTION

DESCRIPTION This function allows you to Delete any failed transactions.

STEP ACTION DISPLAY

1. From the Main Menu Press [3] to access

Merchant Options

2. Use the [] key to scroll to menu

option 10. Store & Forward and then

press [ENTER].

3. Input the Password and press

[ENTER]

Press [7] to Delete Failed Transactions.

Press [ENTER] to delete failed

transactions or press [MENU] to cancel

function.

6. Stop.

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

MERCH. OPTIONS

2.No-Paper Mode

3.Buzzer Set

4.Operation Mode

5.Battery Saver

6.Prt Disclaimer

7.Set Menu Type

8.Set Halo

9.Print Setup

10.Store&Forward

ENTER PASSWORD:

STORE&FORWARD

1.S&F On/Off

2.Mode Select

3.Display Trans

4.Reports

5.Upload Transct

6.Resend Failed

7.Delete Failed

Delete Failed

ENTR=YES, MENU=NO

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 82

Check Reader

FUNCTION

DESCRIPTION

This function allows you to setup the check reader or check imager. For

the Nurit 8000 SECURE, the terminal must be place in the Docking

Station and the check reader/imager connected to the station.

Note: Check Imaging is supported by the POS_PLUS application only.

STEP ACTION DISPLAY

1. From the Main Menu Press [3] to access

Merchant Options

2. Use the [] key to scroll to menu

option 11. Check Reader and then

press [ENTER].

3. Input the Password and press

[ENTER]

If a Check Reader is attached, follow

steps #4 & 5.

Be sure the check reader is connected to

the docking station then press [ENTER].

If a Check Imager is attached, skip to

step #6.

The terminal will detect and initialize the

type of Check Reader you have

connected.

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

MERCH. OPTIONS

3.Buzzer Set

4.Operation Mode

5.Battery Saver

6.Prt Disclaimer

7.Set Menu Type

8.Set Halo

9.Print Setup

10.Store&Forward

11.Check Reader

ENTER PASSWORD:

ChkRdr Options

1.ChkRdr Type

Detecting H/Ware

please wait…..

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 83

Check Reader, Continued

STEP ACTION DISPLAY

Be sure the check imager is connected

to the docking station then press

[ENTER].

The terminal will detect the hardware,

verify that imager is connected and

possibly instruct that the RDM Imager

be turned off then on.

8. The Check Imager will cycle itself and switch to it’s ready state.

9. Stop.

Check Imager – Send Images (Bridge)

FUNCTION

DESCRIPTION

This function allows you upload the check images.

Note: Check Imaging is supported by the POS_PLUS application only.

STEP ACTION DISPLAY

1. From the Main Menu Press [3] to access

Merchant Options

Use the [] key to scroll to menu

option 11. Check Reader and then

press [ENTER].

Continued on next page.

ChkRdr Options

1.ChkRdr Type

2.Send Images

3.Clear Images

4.Setup Menu

5.Franking

RDM Needs to be

Turned OFF & ON

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

MERCH. OPTIONS

3.Buzzer Set

4.Operation Mode

5.Battery Saver

6.Prt Disclaimer

7.Set Menu Type

8.Set Halo

9.Print Setup

10.Store&Forward

11.Check Reader

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 84

Check Imager – Send Images (Bridge), Continued

STEP ACTION DISPLAY

3. Input the Password and press

[ENTER]

4. Press [2].

5. Press [ENTER].

6. Terminal will begin processing and

sending the check images.

7. After a successful upload, delete existing

images. Press [ENTER].

8. Stop.

ENTER PASSWORD:

ChkRdr Options

1.ChkRdr Type

2.Send Images

3.Clear Images

4.Setup Menu

5.Franking

ARE YOU SURE?

ENTR=YES, MENU=NO

BRIDGE UPLOAD

Preparing Image

Delete All Imgs?

ENTR=YES, MENU=NO

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 85

Check Imager – Send Images (FTP)

FUNCTION

DESCRIPTION

This function allows you upload the check images.

Note: Check Imaging is supported by the POS_PLUS application only.

STEP ACTION DISPLAY

1. From the Main Menu Press [3] to access

Merchant Options

Use the [] key to scroll to menu

option 11. Check Reader and then

press [ENTER].

3. Input the Password and press

[ENTER]

4. Press [2].

5. Press [ENTER].

Continued on next page.

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

MERCH. OPTIONS

3.Buzzer Set

4.Operation Mode

5.Battery Saver

6.Prt Disclaimer

7.Set Menu Type

8.Set Halo

9.Print Setup

10.Store&Forward

11.Check Reader

ENTER PASSWORD:

ChkRdr Options

1.ChkRdr Type

2.Send Images

3.Clear Images

4.Setup Menu

5.Franking

ARE YOU SURE?

ENTR=YES, MENU=NO

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 86

Check Imager – Send Images (FTP), Continued

STEP ACTION DISPLAY

Terminal will begin transmitting the

check images and display message

when complete.

7. Stop.

Check Imager – Clear Images

FUNCTION

DESCRIPTION

This function allows you delete the check images.

Note: Check Imaging is supported by the POS_PLUS application only.

STEP ACTION DISPLAY

1. From the Main Menu Press [3] to access

Merchant Options

Use the [] key to scroll to menu

option 11. Check Reader and then

press [ENTER].

3. Input the Password and press

[ENTER]

Continued on next page.

FTP: Transmitting

Please Wait . . .

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

MERCH. OPTIONS

3.Buzzer Set

4.Operation Mode

5.Battery Saver

6.Prt Disclaimer

7.Set Menu Type

8.Set Halo

9.Print Setup

10.Store&Forward

11.Check Reader

ENTER PASSWORD:

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 87

Check Imager – Clear Images

STEP ACTION DISPLAY

4. Press [3].

5. Press [ENTER].

6. Terminal will delete the check images

and display message when complete.

7. Stop.

ChkRdr Options

1.ChkRdr Type

2.Send Images

3.Clear Images

4.Setup Menu

5.Franking

ARE YOU SURE?

ENTR=YES, MENU=NO

Deleting Images

Please Wait . . .

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 88

Check Imager – Setup Menu (Bridge)

FUNCTION

DESCRIPTION

This function accesses the FTP setup menu allowing editing of the

parameters and setup configuration.

Note: Check Imaging is supported by the POS_PLUS application only.

STEP ACTION DISPLAY

1. From the Main Menu Press [3] to access

Merchant Options

Use the [] key to scroll to menu

option 11. Check Reader and then

press [ENTER].

3. Input the Password and press

[ENTER]

4. Press [4].

Press [1] to switch communication

format.

Note: After switching from Bridge to FTP, the

FTP Setup parameters are displayed and

modifiable.

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

MERCH. OPTIONS

3.Buzzer Set

4.Operation Mode

5.Battery Saver

6.Prt Disclaimer

7.Set Menu Type

8.Set Halo

9.Print Setup

10.Store&Forward

11.Check Reader

ENTER PASSWORD:

ChkRdr Options

1.ChkRdr Type

2.Send Images

3.Clear Images

4.Setup Menu

5.Franking

Setup Menu

1.Upload via Æ

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 89

Check Imager – Setup Menu (Bridge), Continued

STEP ACTION DISPLAY

Press [1] to switch communications to

Bridge.

Press [2] to switch communications to

FTP.

Press [MENU/ESC] to exit without

change.

7. Stop.

Check Imager – Setup Menu (FTP)

FUNCTION

DESCRIPTION

This function accesses the FTP setup menu allowing editing of the

parameters and setup configuration.

Note: Check Imaging is supported by the POS_PLUS application only.

STEP ACTION DISPLAY

1. From the Main Menu Press [3] to access

Merchant Options

Use the [] key to scroll to menu

option 11. Check Reader and then

press [ENTER].

Continued on next page.

Upload via Bridge

1.Bridge

2.FTP

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

MERCH. OPTIONS

3.Buzzer Set

4.Operation Mode

5.Battery Saver

6.Prt Disclaimer

7.Set Menu Type

8.Set Halo

9.Print Setup

10.Store&Forward

11.Check Reader

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 90

Check Imager – Setup Menu (FTP), Continued

STEP ACTION DISPLAY

3. Input the Password and press

[ENTER]

4. Press [4].

Press [1] to switch communication

format.

Note: When switching from FTP to Bridge,

the remaining Setup parameters are

not applicable and will not be

displayed.

Press [1] to switch to Bridge.

Press [2] to switch to FTP.

Press [MENU] to exit without change.

7. Press [2] to print the FTP Setup

information.

Continued on next page.

ENTER PASSWORD:

ChkRdr Options

1.ChkRdr Type

2.Send Images

3.Clear Images

4.Setup Menu

5.Franking

Setup Menu

1.Upload via Æ

2.Print Setup

3.RDM Owner Code

Upload via FTP

1.Bridge

2.FTP

Setup Menu

1.Upload via Æ

2.Print Setup

3.RDM Owner Code

4.RDM Merchant ID

5.FTP Phone#

6.FTP Host Name

7.FTP User ID

8.FTP Password

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 91

Check Imager – Setup Menu (FTP), Continued

STEP ACTION DISPLAY

8. Press [3] for the RDM Owner Code.

9. Enter Owner Code then press

[ENTER].

10. Press [4] for RDM Merchant ID.

11. Enter Merchant ID then press

[ENTER].

12. Press [5] for FTP Phone Number.

13. Enter the FTP Phone Number then

press [ENTER].

Continued on next page.

Setup Menu

1.Upload via Æ

2.Print Setup

3.RDM Owner Code

4.RDM Merchant ID

5.FTP Phone#

6.FTP Host Name

7.FTP User ID

8.FTP Password

Setup Menu

RDM Owner Code

Setup Menu

1.Upload via Æ

2.Print Setup

3.RDM Owner Code

4.RDM Merchant ID

5.FTP Phone#

6.FTP Host Name

7.FTP User ID

8.FTP Password

Setup Menu

1.Upload via Æ

2.Print Setup

3.RDM Owner Code

4.RDM Merchant ID

5.FTP Phone#

6.FTP Host Name

7.FTP User ID

8.FTP Password

Setup Menu

RDM MerchantID

Setup Menu

FTP Phone #

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 92

Check Imager – Setup Menu (FTP), Continued

STEP ACTION DISPLAY

14. Press [6] for FTP Host Name.

15. Enter the FTP Host Name then press

[ENTER].

16. Press [7] for the FTP User ID.

17. Enter the FTP User ID then press

[ENTER].

18. Press [8] for FTP Password.

19. Enter the FTP Password then press

[ENTER].

Continued on next page.

Setup Menu

1.Upload via Æ

2.Print Setup

3.RDM Owner Code

4.RDM Merchant ID

5.FTP Phone#

6.FTP Host Name

7.FTP User ID

8.FTP Password

Setup Menu

FTP Host Name

Setup Menu

1.Upload via Æ

2.Print Setup

3.RDM Owner Code

4.RDM Merchant ID

5.FTP Phone#

6.FTP Host Name

7.FTP User ID

8.FTP Password

Setup Menu

FTP User ID

Setup Menu

1.Upload via Æ

2.Print Setup

3.RDM Owner Code

4.RDM Merchant ID

5.FTP Phone#

6.FTP Host Name

7.FTP User ID

8.FTP Password

Setup Menu

FTP Password

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 93

Check Imager – Setup Menu (FTP), Continued

STEP ACTION DISPLAY

20. Press [9] for FTP Send Mode.

21.

Press [1] to send the images in a batch

or press [2] to send the images

individually.

22. Press [10] for PPP User ID.

23. Enter the PPP User ID then press

[ENTER].

24. Press [11] for PPP Password.

25. Enter the PPP Password then press

[ENTER].

Continued on next page.

Setup Menu

2.Print Setup

3.RDM Owner Code

4.RDM Merchant ID

5.FTP Phone#

6.FTP Host Name

7.FTP User ID

8.FTP Password

9.FTP Send Mdde

FTP Send Mode

1-Batch 2-Indiv.

Setup Menu

3.RDM Owner Code

4.RDM Merchant ID

5.FTP Phone#

6.FTP Host Name

7.FTP User ID

8.FTP Password

9.FTP Send Mode

10.PPP User ID

Setup Menu

PPP User ID

Setup Menu

4.RDM Merchant ID

5.FTP Phone#

6.FTP Host Name

7.FTP User ID

8.FTP Password

9.FTP Send Mode

10.PPP User ID

11.PPP Password

Setup Menu

PPP Password

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 94

Check Imager – Setup Menu (FTP), Continued

STEP ACTION DISPLAY

26. Press [12] for RDM Autodial.

27.

Press [1] to turn Autodial or and set the

parameters or press [2] to turn Autodial

off.

28.

Enter the time the Autodial process is to

start then press [ENTER].

Note: Remember the terminal has a 24-hour

clock.

29. Enter the time the Autodial process is to

stop then press [ENTER].

30. Enter the interval time then press

[ENTER].

31. Stop.

Setup Menu

5.FTP Phone#

6.FTP Host Name

7.FTP User ID

8.FTP Password

9.FTP Send Mode

10.PPP User ID

11.PPP Password

12.RDM Autodial

Autodial is ON

1-ON , 2-OFF

START AT:

01:00

STOP AT:

02:00

START AT:

AD INTERVAL (min)

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 95

Check Imager – Franking

FUNCTION

DESCRIPTION

Franking is marking the check with an ELECTRONICALLY PRESENTED

message. Use the following step action table to enable/disable Franking.

Note: Not all Check Imagers support Franking.

STEP ACTION DISPLAY

1. From the Main MENU SCREEN press

[3] to access Merchant Options

Use the [] arrow (Forced Key) to scroll

to 11. Check Reader then press

[ENTER]

3. Input the Password and press

[ENTER]

4. Press [5].

5. Press [1] to disable Franking or [2] to

enable Franking.

6. Stop.

MERCH. OPTIONS

3.Buzzer Set

4.Operation Mode

5.Battery Saver

6.Prt Disclaimer

7.Set Menu Type

8.Set Halo

9.Print Setup

10.Store&Forward

11.Check Reader

ENTER PASSWORD:

MENU SCREEN

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

ChkRdr Options

1.ChkRdr Type

2.Send Images

3.Clear Images

4.Setup Menu

5.Franking

Franking

1.OFF

2.ON

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 96

Signature Option

FUNCTION

DESCRIPTION

This option is used to enable capturing the signature from the touch screen

and printing it on the receipt.

Note: Signature Option is supported by the POS_PLUS application only.

STEP ACTION DISPLAY

1. From the Main MENU SCREEN press

[3] to access Merchant Options

2. Use the [] arrow (Forced Key) to scroll

to 12. Sign. Option then press [ENTER]

3. Input the Password and press

[ENTER]

4. Press [2] to enable signature capture

then press [ENTER]

5. Stop.

MERCH. OPTIONS:

4.Operation Mode

5.Battery Saver

6.Prt Disclaimer

7.Set Menu Type

8.Set Halo

9.Print Setup

10.Store&Forward

11.Check Reader

12.Sign. Option

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

ENTER PASSWORD:

Sign. Capt. OFF

1.OFF

2.ON

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 97

Bridge Communication

FUNCTION

DESCRIPTION

This menu functions allows you to set communication parameters for uploading

captured images to the web via Bridge Communication.

Note: Bridge Communication is supported by the POS_PLUS application only.

STEP ACTION DISPLAY

1. From the Main MENU SCREEN press

[3] to access Merchant Options

Use the [] arrow (Forced Key) to scroll

to 13. Bridge Comm then Press

[ENTER]

Select the appropriate communication

parameter (specific to the Bridge) by

pressing [ENTER], then edit as

desired.

Stop.

MERCH. OPTIONS:

5.Battery Saver

6.Prt Disclaimer

7.Set Menu Type

8.Set Halo

9.Print Setup

10.Store&Forward

11.Check Reader

12.Sign. Option

13.Bridge Comm

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

PARAMS (Modem)

1.Phone>

2. Via>Modem

3.Baud>2400

4.Fast Con>No

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 98

Language Setup

FUNCTION

DESCRIPTION

This menu functions allows you to set the Display and Printer Language.

Note: Language Setup is supported by the POS_PLUS application only.

STEP ACTION DISPLAY

1. From the Main MENU SCREEN press

[3] to access Merchant Options

Use the [] arrow (Forced Key) to scroll

to 14. Language Setup then Press

[ENTER]

Press [1] to change the Display

Language or [2] to change the Printer

Language.

4. Press the number that corresponds with

the desired language.

5. Stop.

MERCH. OPTIONS:

6.Prt Disclaimer

7.Set Menu Type

8.Set Halo

9.Print Setup

10.Store&Forward

11.Check Reader

12.Sign. Option

13.Bridge Comm

14.Language Set

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

LANGUAGE SETUP

1.Display

2.Printer

CHOOSE LANGUAGE

2.ENGLISH

9.SPANISH

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide 99

4. Host Parameters

DESCRIPTION

This menu allows you to change host parameters, such as merchant numbers,

terminal IDs, authorization/batch phone numbers and the radio address. Each

host has different individual parameters, which should be changed only if advised

by the processing bank or NURIT technical support. If the terminal capture type is

either Host Manual or Terminal, the AutoDial feature can be activated and the

time/duration can be modified. There are six sub-menus in Host Parameters.

 Host Parameters  Host Phones  Print EDC Setup

 Protocol Version  AutoDial Setup  Host Radio Address

Host Parameters

FUNCTION

DESCRIPTION This allows you to edit your Host Processor parameters.

STEP ACTION DISPLAY

1. From the Main Menu Press [4] to

access Host Parameters

2. Press [1] for Host Parameters

3. Input the Password and press

[ENTER]

Use the [] and [] scroll through the

different hosts. Select the desired host

and then press [ENTER].

Press the number corresponding with

your selection.

NOTE:The actual Host name will appear on the

display for each EDC Type.

Continued on next page

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

HOST PARAMS:

1.Hosts Params

2.Hosts Phone

3.Prnt EDC Setup

4.Protocol Ver

5.AutoDial Setup

6.Host Radio Addr

ENTER PASSWORD:

EDC PARAMETERS

1.Host Name CR

2.Host Name DB

3.Host Name CK

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

100

Host Parameters, Continued

STEP ACTION DISPLAY

Use the [] and []to scroll through the

different parameters. Find the parameter

that you wish to edit and then press

[ENTER].

Press the number corresponding with

your selection.

Note: Parameter names differ by host.

6. Enter the new parameter information then press [ENTER].

7. Upon completion of all changes press [MENU]

Press [ENTER] to save the changes

Press [MENU] to cancel the changes

9. Stop.

Save Parameters?

ENTR=YES, MENU=NO

Host Name Credit

1.Client Number

2.Terminal_Number

3.Merchant_Number

4.Enter_EBT_Auth

5.LLI_Number

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

101

Host Phones

FUNCTION

DESCRIPTION

This option allows the changing of authorization phone numbers

and batch phone numbers for the host processor.

STEP ACTION DISPLAY

1. From the Main Menu Press [4] to access

Host Parameters

2. Press [2] for Hosts Phones

3. Input the Password then

press [ENTER]

Use the [] and [] scroll through the

different hosts. Select the host that you

wish to edit phone numbers for and then

press [ENTER].

Press the number corresponding with

your selection.

Note: The actual Host name will appear on the

display for each EDC Type.

To Edit Authorization Phone Numbers

press [1]

To Edit Batch Phone Numbers press [2]

Continued on next page

PHONE TYPE

1.Auth. Phones

2.Batch Phones

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

HOST PARAMS:

1.Hosts Params

2.Hosts Phone

3.Prnt EDC Setup

4.Protocol Ver

5.AutoDial Setup

6.Host Radio Addr

ENTER PASSWORD:

PHONE MENU:

1.Host Name CR

2.Host Name DB

3.Host Name CK

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

102

Host Phones, Continued

STEP ACTION DISPLAY

Select which phone number you wish to

edit.

To set communication for radio before

phone line, press [4] and skip to

Step #10.

The blinking cursor will be positioned on

the first character of the existing phone

number. Enter the new phone number.

Delete any of the old number with the [BS]

key.

Upon completion press [ENTER].

The existing baud rate will be highlighted,

press [MENU] to keep existing rate or

enter the number that corresponds to the

desired baud rate then press [ENTER].

9. Select the next phone number to be

changed and repeat Steps 7 & 8.

10.

If Line B4 Radio was selected:

Press [1] to verify that the terminal will not

try to communicate via the phone line

before the radio.

11.

Press [MENU] twice and you will be

prompted to save your changes.

Press [ENTER] to save the changes.

Press [MENU] to cancel the changes.

12. Stop.

EDIT PHONE

1.Phone # 1

2.Phone # 2

3.Phone # 3

4.Line B4 Radio

Save Parameters?

NTR=YES, MENU=NO

Baud Rate:

1.300

2.1200

3.2400

4.4800

5.7200

6.9600

7.12200

8.14400

EDIT PHONE

1.Phone # 1

2.Phone # 2

3.Phone # 3

EDIT PHONE

1.Phone # 1

2.Phone # 2

3.Phone # 3

Phone # 1

186654055XX

2.1200

Line Before: OFF

1.OFF

2.ON

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

103

Print EDC Setup

FUNCTION

DESCRIPTION

This report prints host information such as merchant numbers,

phone numbers, baud rates, capture type and radio information.

STEP ACTION DISPLAY

1. From the Main Menu Press [4] to access

Host Parameters.

2. Press [3] to Print EDC Setup.

3. Input the Password then press

[ENTER].

4. Stop.

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS

HOST PARAMS:

1.Hosts Params

2.Hosts Phone

3.Prnt EDC Setup

4.Protocol Ver

5.AutoDial Setup

6.Host Radio Addr

ENTER PASSWORD:

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

104

Protocol Version

FUNCTION

DESCRIPTION

This displays the protocol/host version. This is mainly viewed by

programmers or Customer Support Representatives.

STEP ACTION DISPLAY

1. From the Main Menu Press [4] to access

Host Parameters

2. Press [4] for Protocol Version

3. Select the EDC Type you would like to

view the Protocol Version for.

Press Any Key to go back to the

previous screen.

Note: The Actual Protocol Version will appear on

the display.

5. Stop.

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

HOST PARAMS:

1.Hosts Params

2.Hosts Phone

3.Prnt EDC Setup

4.Protocol Ver

5.AutoDial Setup

6.Host Radio Addr

CHOOSE EDC TYPE

2.CREDIT

3.DEBIT

4.EBT

HOST Ver. 00.00

Press Any Key…

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

105

AutoDial Setup

FUNCTION

DESCRIPTION

If the terminal capture type is Host Manual or Terminal Capture,

the AutoDial feature will automatically perform the manual batch

function. If the terminal capture type is Autobatch, this function is

not applicable.

STEP ACTION DISPLAY

1. From the Main Menu Press [4] to access

Host Parameters

2. Press [5] to view Autodial Setup

3. Input the Password then press

[ENTER].

4. Press [1] for ALL or select the desired

host.

5. Press [1] to turn AutoDial OFF or

press [2] to turn AutoDial ON.

Continued on next page

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

HOST PARAMS:

1.Hosts Params

2.Hosts Phone

3.Prnt EDC Setup

4.Protocol Ver

5.AutoDial Setup

6.Host Radio Addr

CHOOSE HOST

1.ALL

2.Credit Host

3.Debit Host

AUTODIAL SETUP

1.OFF

2.ON

ENTER PASSWORD:

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

106

AutoDial Setup, Continued

STEP ACTION DISPLAY

If AutoDial was turned on the system will

prompt for the AutoDial start time.

Enter the start time then press [ENTER].

Remember that the terminal has a 24-

hour (military) clock.

Enter the stop time then press [ENTER].

Stop time is usually one hour after start

time.

Enter the AutoDial time interval then

press [ENTER]. The interval is usually 5

minutes.

9. Stop.

STOP AD AT:

04:00

STOP AD AT:

04:00

AD INTERVAL:

START AD AT:

03:00

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

107

Host Radio Address

FUNCTION

DESCRIPTION

Displays and allows the editing of Host Radio Addresses on

Mobitex and Motient wireless terminals. If the terminal is wireless

CDPD or is not wireless, this function will not be available.

STEP ACTION DISPLAY

1. From the Main Menu Press [4] to access

Host Parameters

2. Press [6] for Host Radio Address.

3. Input the Password then press [ENTER]

4. Select the desired host.

Press [1] for Authorization Radio Address

Press [2] for Batch Radio Address.

Continued on next page.

Radio Addresses

1.Credit Host

2.Debit Host

ENTER PASSWORD:

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

HOST PARAMS:

1.Hosts Params

2.Hosts Phone

3.Prnt EDC Setup

4.Protocol Ver

5.AutoDial Setup

6.Host Radio Addr

Radio Addresses

1.Auth. Radio:

2.Batch Radio:

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

108

Host Radio Address, Continued

STEP ACTION DISPLAY

Enter the new Radio Address then press

[ENTER]

Press [MENU] to exit function without

modifying.

Note: Radio Addresses should not be modified

without technical advisement.

Press [ENTER] to save the new

parameter

Press [MENU] to cancel.

8. Stop.

Save Parameters?

ENTR=YES, MENU=NO

Radio Addresses

1.Auth. Radio:

2.Batch Radio:

Host Radio Add

123456

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

109

5. System Options

DESCRIPTION

This menu consists of twelve different functions that can be changed manually.

 Set Time/Date  Edit PIN Key  Sel. Master Key  Set Batch No.

 Edit Database  Working Mode  Test Mode  Predial Call

 PIN Pad Initialize  PIN Pad Function  PIN Pad Config.  Status Bar

Set Terminal Time and Date

FUNCTION

DESCRIPTION This option allows you to set the time and date in the terminal.

STEP ACTION DISPLAY

1. From the Main MENU SCREEN press [5]

to access System Options.

2. Press [ENTER] to Set the Time and

Date.

3. Verify the current Time and Date is

incorrect then press [ENTER] to edit.

4. Input the correct date using MM/DD/YY

format.

Continued on next page

SETTING DATE:

MM/DD/YY

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

SYSTEM OPTIONS:

1.Set Time/Date

2.Edit PIN Key

3.Sel. Mstr Key

4.Set Batch No.

5.Edit Database

6.Working Mode

7.Test Mode

8.Predial Call

9.PinPad Init.

05/31/2003

10:02:49

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

110

Set Terminal Time and Date, Continued

STEP ACTION DISPLAY

5. Input the correct time using Military (24-

hour) Format

6. Verify the time and date is now correct and press [MENU]

7. Stop.

SETTING TIME

hh:mm:00

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

111

Edit PIN Key

FUNCTION

DESCRIPTION

This option allows the changing or viewing of the working key for

the PIN pad (access to this menu is not available without a PIN

pad). The only time a change should be made in this field is if

instructed by customer service.

STEP ACTION DISPLAY

1. From the Main MENU SCREEN press [5]

to access System Options.

2. Press [ENTER] to Set the Time and Date.

3. Input the Password and Press [ENTER]

Place the curser over the number you

wish to edit using the [] and [] keys.

Press [CLEAR] to remove the entire

Working Key, then input the new one.

Upon completion Press [ENTER]

5. Stop.

ENTER PASSWORD:

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

SYSTEM OPTIONS:

1.Set Time/Date

2.Edit PIN Key

3.Sel. Mstr Key

4.Set Batch No.

5.Edit Database

6.Working Mode

7.Test Mode

8.Predial Call

9.PinPad Init.

ENTER PASSWORD:

****

EDIT WORKING KEY

0000000000000000

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

112

Select Master Key Location

FUNCTION

DESCRIPTION

This changes the Master key location (access to this menu is not

available without a PIN pad). Again, this is a field that should only

be changed if instructed by customer service.

STEP ACTION DISPLAY

1. From the Main MENU SCREEN press [5]

to access System Options.

2. Press [3] to Select Master Key

3. Input the Password and Press [ENTER]

4. Input the correct Master Key Location

and Press [ENTER]

5. Stop.

SYSTEM OPTIONS:

1.Set Time/Date

2.Edit PIN Key

3.Sel. Mstr Key

4.Set Batch No.

5.Edit Database

6.Working Mode

7.Test Mode

8.Predial Call

9.PinPad Init.

ENTER PASSWORD:

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

ENTER PASSWORD:

MASTER LOCATION

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

113

Set Batch Number

FUNCTION

DESCRIPTION

This menu option allows the batch number to be changed, if

needed. This is also a field that should only be changed when

instructed by customer service. To change the batch number:

STEP ACTION DISPLAY

From the Main MENU SCREEN press [5]

to access System Options.

2. Press [4] to Set the Batch Number

3. Input the Password and Press [ENTER]

Choose Host requiring batch number

change.

Continued on next page

CHOOSE HOST

2.Credit Host

3.Debit Host

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

SYSTEM OPTIONS:

1.Set Time/Date

2.Edit PIN Key

3.Sel. Mstr Key

4.Set Batch No.

5.Edit Database

6.Working Mode

7.Test Mode

8.Predial Call

9.PinPad Init.

ENTER PASSWORD:

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

114

Set Batch Number, Continued

STEP ACTION DISPLAY

Input the New Batch # then press

[ENTER].

Press [ENTER] to complete.

Press [MENU] to cancel.

Stop.

New Batch No:

000000014

ARE YOU SURE?

ENTR=YES, MENU=NO

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

115

Edit Database

FUNCTION

DESCRIPTION

This sub-menu has three options, Void Transaction, Clear

Database and Clear Offline. Void transaction will void a

transaction by the transaction number. Clear Database will

delete a batch and all its transactions. Clear Offline will clear

all the offline transactions in the terminal.

Edit Database – Void a Transaction

STEP ACTION DISPLAY

1. From the Main MENU SCREEN press

[5] to access System Options.

2. Press [5] to Edit the Database.

3. Press [1]

4. Select an EDC Type .

Continued on next page

EDIT DATABASE

1.Void Transact

2.Clear Database

3.Clear Offline

CHOOSE EDC TYPE

2.CREDIT

3.CASH

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

SYSTEM OPTIONS:

1.Set Time/Date

2.Edit PIN Key

3.Sel. Mstr Key

4.Set Batch No.

5.Edit Database

6.Working Mode

7.Test Mode

8.Predial Call

9.PinPad Init.

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

116

Edit Database – Void a Transaction, Continued

STEP ACTION DISPLAY

5. Input the Password and Press

[ENTER]

6. Input the transaction number to be

voided then press [ENTER].

View the transaction on the display to

verify it is the correct transaction then

Press [ENTER].

Press [ENTER] to complete

Press [MENU] to cancel

Stop.

#0001 SL 52.00

Mastercard 0803

Void Trns #1?

ENTR=YES, MENU=NO

ENTER PASSWORD:

* * * *

Transaction # ?

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

117

Edit Database – Clearing the Database

STEP ACTION DISPLAY

From the Main MENU SCREEN press [5]

to access System Options.

2. Press [5] for Edit Database

3. Press [2] to Clear Database

4. Input the Password and Press [ENTER]

Press [ENTER] to continue

Press [MENU] to cancel

Select the EDC type you wish to clear or

press [ENTER] for all EDC types.

A report stating which databases were

cleared will print.

Stop.

EDIT DATABASE

1.Void Transact

2.Clear Databas

3.Clear Offline

ENTER PASSWORD:

ARE YOU SURE?

ENTR=YES, MENU=NO

CHOOSE EDC TYPE

1.ALL

2.CREDIT

3.DEBIT

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

SYSTEM OPTIONS:

1.Set Time/Date

2.Edit PIN Key

3.Sel. Mstr Key

4.Set Batch No.

5.Edit Database

6.Working Mode

7.Test Mode

8.Predial Call

9.PinPad Init.

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

118

Edit Database – CLEAR OFFLINE

STEP ACTION DISPLAY

1. From the Main MENU SCREEN press [5]

to access System Options.

2. Press [5] to Edit Database

3. Press [3] to Clear Offline

4. Input the Password and Press [ENTER]

Press [ENTER] to continue

Press [MENU] to cancel

6. Stop.

Delete Offline?

ENTR=YES, MENU=NO

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

SYSTEM OPTIONS:

1.Set Time/Date

2.Edit PIN Key

3.Sel. Mstr Key

4.Set Batch No.

5.Edit Database

6.Working Mode

7.Test Mode

8.Predial Call

9.PinPad Init.

EDIT DATABASE

1.Void Transact

2.Clear Databas

3.Clear Offline

ENTER PASSWORD:

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

119

Working Mode

INFORMATION This sub-menu has four options:

 Tip Options  AVS Options

 Card Present Options  Comment Option

Working Mode – TIP OPTIONS

FUNCTION

DESCRIPTION

This option allows you to include up to three tips per transaction.

This option will also allow you to name the tip type for identification

and set a default tip amount for each tip as desired. All tips will be

processed during the transaction.

STEP ACTION DISPLAY

1. From the Main MENU SCREEN press [5]

to access System Options.

2. Press [6] for Working Mode

3. Press [1] for Tip Options.

4. Input the Password and Press [ENTER]

Continued on next page

WORKING MODE:

1.Tip Option

2.AVS Option

3.Card Prsnt Opt

4.Cpmment Opt.

ENTER PASSWORD:

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

SYSTEM OPTIONS:

1.Set Time/Date

2.Edit PIN Key

3.Sel. Mstr Key

4.Set Batch No.

5.Edit Database

6.Working Mode

7.Test Mode

8.Predial Call

9.PinPad Init.

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

120

Working Mode – Tip Options, Continued

STEP ACTION DISPLAY

Use the [] and [] to scroll through tips

options, find the tip that you wish to edit

and then press [ENTER].

Press the number corresponding with your

selection.

Note: The current status is displayed in parenthesis.

Use the [] and []to scroll between Off

and On then press [ENTER] to select.

Note: After turning a tip option ON you will then be

prompted to edit the Tip name.

Using the method described in Editing

Header, enter the 13-character tip

designation. Press [ENTER] when the

name has been entered.

Press [ENTER] without the modification to

keep the existing name.

If desired, enter the default tip amount

then press [ENTER].

Press [ENTER] to bypass.

9. Stop.

TIP OPTIONS:

1. Tip 1: (OFF)

2. Tip 2: (OFF)

3. Tip 3: (OFF)

Tip 1 (OFF)

1. OFF

2. ON

TIP 1 Name: 1 N

Tip

Tip : $0.00

New Rate: 0.00

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

121

Working Mode – AVS OPTIONS

FUNCTION

DESCRIPTION

These options are used for AVS mode. AVS (Address Verification)

will prompt the user for a zip code, and street address.

* There are three options for AVS:

x OFF – no prompt for zip code, or street address

x ON MANUAL ONLY – will prompt for zip code and street address on a manual entry only

x ALWAYS – will prompt for zip code and street address on swiped and manual entries.

STEP ACTION DISPLAY

1. From the Main Menu Press [5] to access

System Options

2. Press [6] for Working Mode

3. Press [2] for AVS Options.

4. Input the Password and Press [ENTER]

Continued on next page

ENTER PASSWORD:

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

SYSTEM OPTIONS:

1.Set Time/Date

2.Edit PIN Key

3.Sel. Mstr Key

4.Set Batch No.

5.Edit Database

6.Working Mode

7.Test Mode

8.Predial Call

9.PinPad Init.

WORKING MODE:

1.Tip Option

2.AVS Option

3.Card Prsnt Opt

4.Coment Opt.

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

122

Working Mode – AVS Options, Continued

STEP ACTION DISPLAY

Select the desired AVS Option

*Note:See descriptions above

6. Press Any Key to Complete

7. Stop.

Ask for AVS:

1. Off

2. Manual Only

3. Always

Check rates

with your bank

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

123

Working Mode – Card Present Options

FUNCTION

DESCRIPTION

These options are used for verifying if the card is present at the

point of Sale.

* There are three options for Card Present:

x NO, IF MANUAL – No prompt to verify card is present on a manual entry. Will prompt for

zip code and street address.

x ALWAYS YES – No prompt to verify card is present on a manual entry. Will prompt for

zip code only.

x ASK, IF MANUAL –Will prompt to verify card is present on a manual entry. Will prompt

for zip code only if card is present or both zip and street address if card is not present.

STEP ACTION DISPLAY

1. From the Main Menu Press [5] to access

System Options

2. Press [6] for Working Mode

3. Press [3] for Card Present Options.

4. Input the Password and Press [ENTER]

Continued on next page.

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

SYSTEM OPTIONS:

1.Set Time/Date

2.Edit PIN Key

3.Sel. Mstr Key

4.Set Batch No.

5.Edit Database

6.Working Mode

7.Test Mode

8.Predial Call

9.PinPad Init.

WORKING MODE:

1.Tip Options

2.AVS Options

3.Card Prsnt Opt

4.Comment Opt.

ENTER PASSWORD:

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

124

Working Mode – Card Present Options, Continued

STEP ACTION DISPLAY

Select the desired Card Present

Option.

*Note:See descriptions above

6. Press Any Key to Complete.

7. Stop.

Check rates

with your bank

Card present:

1.No, if manual

2.Always Yes

3.Ask, if manual

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

125

Working Mode – Comment Options

FUNCTION

DESCRIPTION

Use this option to add a one line – 24 character comment to the

receipt between the signature line and the trailer.

STEP ACTION DISPLAY

1. From the Main Menu Press [5] to access

System Options

2. Press [6] for Working Mode

3. Press [4] for Comment Options.

4. Input the Password and press [ENTER]

Using the method described in Editing

Header, enter the 24-character comment

line. Press [ENTER] when the comment

has been entered.

6. Stop.

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

SYSTEM OPTIONS:

1.Set Time/Date

2.Edit PIN Key

3.Sel. Mstr Key

4.Set Batch No.

5.Edit Database

6.Working Mode

7.Test Mode

8.Predial Call

9.PinPad Init.

WORKING MODE:

1.Tip Options

2.AVS Options

3.Card Prsnt Opt

4.Comment Opt.

ENTER PASSWORD:

Comment Opt. 1 N

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

126

Predial Call

FUNCTION

DESCRIPTION

The terminal can be programmed to start dialing once the credit card is

swiped. If pre-dial is turned off, the terminal will start dialing after entering

the dollar amount. Ideally, pre-dial saves on transaction time.

STEP ACTION DISPLAY

1. From the Main Menu Press [5] to access

System Options

2. Press [8] for Predial Call

3. Input the Password and press [ENTER]

4. Select the EDC type you wish to use

Predial for.

5. Use the [] and []to scroll between Off

and On then press [ENTER] to select.

6. Stop.

CHOOSE EDC TYPE:

1. ALL

2. CREDIT

3. DEBIT

PREDIAL CALL:

1. OFF

2. ON

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

SYSTEM OPTIONS:

1.Set Time/Date

2.Edit PIN Key

3.Sel. Mstr Key

4.Set Batch No.

5.Edit Database

6.Working Mode

7.Test Mode

8.Predial Call

9.PinPad Init.

ENTER PASSWORD:

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

127

Pin Pad Initialization

FUNCTION

DESCRIPTION

This menu will allow you to set the PIN pad initialization to

automatic or manually.

STEP ACTION DISPLAY

1. From the Main Menu Press [5] to access

System Options

2. Press [9] for PinPad Initialize

Use the [] and []to scroll between

Auto and Manual then Press [ENTER] to

select.

4. Stop.

PINPAD INIT. [1]:

1. Auto

2. Manual

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

SYSTEM OPTIONS:

1.Set Time/Date

2.Edit PIN Key

3.Sel. Mstr Key

4.Set Batch No.

5.Edit Database

6.Working Mode

7.Test Mode

8.Predial Call

9.PinPad Init.

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

128

Pin Pad Function

FUNCTION

DESCRIPTION

This menu gives option to encrypt terminal manually for the

internal PIN Pad.

STEP ACTION DISPLAY

1. From the Main Menu Press [5] to access

System Options

2. Using the []key scroll down to option #

10. Pin Pad func.

3. Proceed with the regular encryption

process.

4. Stop.

Í Í Í Í

ÎÎÎ Î

ÍÍÍ Í

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

SYSTEM OPTIONS:

2.Edit PIN Key

3.Sel. Mstr Key

4.Set Batch No.

5.Edit Database

6.Working Mode

7.Test Mode

8.Predial Call

9.PinPad Init.

10.PinPad Func.

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

129

Pin Pad Configuration

FUNCTION

DESCRIPTION

This menu options allows the terminal to be programmed for an

internal PIN Pad or an external PIN Pad.

STEP ACTION DISPLAY

1. From the Main Menu Press [5] to access

System Options

Using the []key scroll down to option

# 11.Pin Pad Config. then press

[ENTER] to select.

3. Input the Password and Press [ENTER]

Press [1] for internal PinPad

Press [2] for external PinPad

5. Stop.

CHOOSE PINPAD:

1- built in 2-ext.

ENTER PASSWORD:

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

SYSTEM OPTIONS:

3.Sel. Mstr Key

4.Set Batch No.

5.Edit Database

6.Working Mode

7.Test Mode

8.Predial Call

9.PinPad Init.

10.PinPad Func.

11.PinPad Confi

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

130

Status Bar

FUNCTION

DESCRIPTION

This menu options allows you to turn the terminal’s status bar

display off and on.

STEP ACTION DISPLAY

1. From the Main Menu Press [5] to access

System Options

Using the []key scroll down to option

# 12.Status Bar then press [ENTER] to

select.

3. Press the number that corresponds with

the desired selection.

4. Stop.

STATUS BAR:

1.OFF

2.ON

3.ON with Time

4.ON with Date

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

SYSTEM OPTIONS:

4.Set Batch No.

5.Edit Database

6.Working Mode

7.Test Mode

8.Predial Call

9.PinPad Init.

10.PinPad Func.

11.PinPad Config.

12.Status Bar

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

131

6. Radio Params

MENU DESCRIPTION This Menu options allows viewing of the terminals radio

information. There are three sub-menus in the Radio Params

option.

 Radio Tests  Print Params  Battery Test

Radio Tests - RADIO RSSI

FUNCTION

DESCRIPTION

This shows the Radio Signal Strength Indicator. The RSSI should

be a thirteen or greater to obtain good reception. The base station

will vary, depending on location.

STEP ACTION DISPLAY

1. From the Main Menu Press [6] to access

Radio Params

2. Allow a few moments for the terminal to

Press [1] to access Radio Tests.

Press [1] to access Radio RSSI.

Note: The actual RSSI and base station will

appear on the display.

5. Press [MENU] to exit

6. Stop.

PLEASE WAIT

RADIO RSSI: 18

BASE STN. : 40

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

RADIO PARAMS:

1.Radio Tests

2.Print Params

3.Battery Test

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

132

Radio Tests - TERMINAL MAN# (MOBITEX ONLY)

FUNCTION

DESCRIPTION

This submenu function displays the MAN# (Mobitex Access

Number) assigned to the terminal’s radio.

STEP ACTION DISPLAY

1. From the Main Menu Press [6] to access

Radio Params

2. Allow a few moments for the terminal to

3. Press [1] to access Radio Tests.

4. Press [2] for Terminal MAN#.

5. Press any key to exit.

6. Stop.

MAN=55555555

Press any key…

RADIO PARAMS:

1. Radio Tests

2. Print Params

3. Battery Test

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

PLEASE WAIT

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

133

Radio Tests - Terminal LLI# (Motient Only)

FUNCTION

DESCRIPTION

This submenu function displays the LLI# (Logical Link Indicator)

assigned to the terminal’s radio. The LLI must be active on the

Motient network.

STEP ACTION DISPLAY

1. From the Main Menu Press [6] to access

Radio Params

2. Allow a few moments for the terminal to

Press [1] to access Radio Tests.

Press [2] for Terminal LLI#.

Note: The RPD ID is the LLI#

5. Press any key to exit.

6. Stop.

RPD ID=11111111

PRESS ANY KEY…

RADIO PARAMS:

1. Radio Tests

2. Print Params

3. Battery Test

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

PLEASE WAIT

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

134

Radio Tests - Radio Information

FUNCTION

DESCRIPTION

This submenu function displays information specific to the units

radio and is used mainly by technical support.

STEP ACTION DISPLAY

1. From the Main Menu Press [6] to access

Radio Params

2. Allow a few moments for the terminal to

Press [1] to access Radio Tests.

Press [3] for Radio Info.

Note: Display will differ

5. Press any key twice to exit.

6. Stop.

ID: RIM MASC 0

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

PLEASE WAIT

RADIO PARAMS:

1. Radio Tests

2. Print Params

3. Battery Test

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

135

Print Params

FUNCTION

DESCRIPTION

This menu options allows you to print the radio parameters set for

the terminal’s radio.

STEP ACTION DISPLAY

1. From the Main Menu Press [6] to access

Radio Params

2. Allow a few moments for the terminal to

3. Press [2] for Print Params.

4. The Radio Parameter information will print out.

5. Press [MENU] to exit.

6. Stop.

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

PLEASE WAIT

RADIO PARAMS:

1. Radio Tests

2. Print Params

3. Battery Test

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

136

Battery Test

FUNCTION

DESCRIPTION This submenu function displays the current battery strength.

STEP ACTION DISPLAY

1. From the Main Menu Press [6] to access

Radio Params.

2. Allow a few moments for the terminal to

3. Press [3] for Battery Test.

4. Press [MENU] three times to exit.

5. Stop.

BATT. OK (100%)

GOOD BATTERY

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

.NOS Menu

PLEASE WAIT

RADIO PARAMS:

1. Radio Tests

2. Print Params

3. Battery Test

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

137

7. Download

DESCRIPTION

This Main Menu has four sub-menus pertaining to programming

and reprogramming the terminal. This should only be done under

advisement of customer service. Modem downloads cannot be

done via RADIO and need to be done connected to a telephone

line.

 Parameters  Autoload

 Application Only  Communication Params

Download Definitions

Parameter A parameter download is for downloading the merchant’s file into

the terminal. The information being downloaded is merchant

specific. I.e.: Merchant ID, Terminal ID, etc.

Autoload An autoload is used to update or change the current application in

the terminal in addition to downloading the merchant’s parameters.

I.e.: Retail to Restaurant application would require an autoload.

Application

Only

This option will download only the application information but not the

merchant parameters.

Downloading

FUNCTION

DESCRIPTION Refer to above information for download definitions.

STEP ACTION DISPLAY

1. From the Main Menu Press [7] to

access the Download Menu

2. Input the Password and press

[ENTER]

Continued on next page

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

ENTER PASSWORD:

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

138

Downloading, Continued

STEP ACTION DISPLAY

Press [ENTER] to continue

Press [MENU] to exit.

To download via current setting

press [ENTER] and skip to step 9.

Press [MENU] to set communication

options.

Note: The current setting will display

Press [3] to change the download

method.

Note: Continuously pressing [3] will scroll

through the available options.

Whichever option is selected is the

option that will appear on top in

parenthesis.

If downloading via modem press [1]

and input the download phone

number.

If an exchange prefix is needed press [2] and input the exchange prefix.

And/Or

If a suffix is needed press [7] and input the suffix

8. Press [MENU] twice after all the communication parameters for the

download have been set.

Continued on next page

ARE YOU SURE?

ENTR=YES, MENU=NO

Through COM1?

ENTR=YES, MENU=NO

CONNECT (Modem)

1.Phone>

2.Exchange Pref>

3.Via>Modem

4.Baud>5600

5.Dial>Tone

6.Gateway

7.Suffix

CONNECT (Modem)

1.Phone>

2.Exchange Pref>

Via>Modem

4.Baud>5600

Enter Phone Num

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

139

Downloading, Continued

STEP ACTION DISPLAY

9. Input the Site ID for the terminal.

10.

Select the download type by

selecting the number that

corresponds with the appropriate

choice.

11. Stop.

Download

1.Parameters

2.Autoload

3.Applicat. only

4.Comm. Params

Enter Site ID

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

140

Download – Communication Parameters, Phone

FUNCTION

DESCRIPTION

This menu function allows you to set the communication

parameters specifically for downloading the terminal.

STEP ACTION DISPLAY

1. From the Main Menu Press [7] to access

the Download Menu

2. Input the Password and press [ENTER]

Press [ENTER] to continue

Press [MENU] to exit

4. Press [MENU] to edit the download

phone number.

5. Input the desired phone number for the

download then press [ENTER].

Continued on next page

18661234567

ENTR=YES, MENU=NO

Enter Phone Num

18661234567

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

ENTER PASSWORD:

ARE YOU SURE?

ENTR=YES, MENU=NO

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

141

Download – Communication Parameters, Phone, Continued

STEP ACTION DISPLAY

6. Press [MENU] to return to the Download

7. Stop.

Download – Comm Parameters, Exchange Prefix

FUNCTION

DESCRIPTION

This menu function allows you to set a dialing prefix specifically for

dialing out to download only.

STEP ACTION DISPLAY

1. From the Main Menu press [7] to access

the Download Menu.

2. Input the Password and press [ENTER]

3. Press [ENTER] to continue.

Continued on next page

ENTER PASSWORD:

ARE YOU SURE?

NO YES

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

Download

1.Parameters

2.Autoload

3.Applicat. only

4.Comm. Params

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

142

Download – Comm Parameters, Exchange Prefix, Continued

STEP ACTION DISPLAY

4. Press [ENTER] to continue

5. Press [4] for Communication Parameters

6. Press [2] and then press [ENTER] for

Exchange Prefix

7. Input the desired exchange Prefix then

press [ENTER]

8. Press [MENU] to return to the Download

9. Stop.

18661234567

ENTR=YES, MENU=NO

Connect (Modem)

Prefix:

CONNECT (Modem)

1.Phone>

2.Prefix>

3.Via>Modem

4.Baud>33600

5.Dial>Tone

6.Gateway

7.Suffix

8.TCP/IP> NO

Download

1.Parameters

2.Autoload

3.Applicat. only

4.Comm. Params

Download

1.Parameters

2.Autoload

3.Applicat. only

4.Comm. Params

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

143

Download – Comm Parameters, Via>

FUNCTION

DESCRIPTION

This menu function allows you to switch download method. For

example: From Modem to Com1.

STEP ACTION DISPLAY

1. From the Main Menu press [7] to access

the Download Menu.

2. Input the Password and press [ENTER].

3. Press [ENTER] to continue.

4. Press [ENTER] to continue.

Press [4] for Communication Parameters.

Continued on next page

18661234567

ENTR=YES, MENU=NO

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

ENTER PASSWORD:

ARE YOU SURE?

NO YES

Download

1.Parameters

2.Autoload

3.Applicat. only

4.Comm. Params

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

144

Download – Comm Parameters, Via>, Continued

STEP ACTION DISPLAY

Press [3] for Via>Modem

Note: Prompts will vary depending on current

settings.

Each time ENTER is pressed the display

will toggle through the available download

methods. Upon the desired setting press

[MENU] to return to the download menu.

7. Stop.

Download – Comm Params, Baud Rate

FUNCTION

DESCRIPTION

This menu function allows you to change the baud rate (Rate that

data is exchanged between terminal and modem)

STEP ACTION DISPLAY

1. From the Main Menu Press [7] to access

the Download Menu

2. Input the Password and press [ENTER]

Continued on next page

ENTER PASSWORD:

CONNECT (Modem)

1.Phone>

2.Prefix>

3.Via>Ext.Modem

4.Baud>33600

5.Dial>Tone

6.Gateway

7.Suffix

8.TCP/IP> NO

CONNECT (Modem)

1.Phone>

2.Prefix>

3.Via>Modem

4.Baud>33600

5.Dial>Tone

6.Gateway

7.Suffix

8.TCP/IP> NO

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

145

Download – Comm Params, Baud Rate, Continued

STEP ACTION DISPLAY

3. Press [ENTER] to continue

4. Press [ENTER] to continue

5. Press [4] for Communication Parameters

Press [4]

Each time [4] is pressed the display

will toggle through the available Baud

Rates for Download. Upon the desired

setting press [MENU] to return to the

download menu.

7. Stop.

ARE YOU SURE?

NO YES

18661234567

ENTR=YES, MENU=NO

Download

1.Parameters

2.Autoload

3.Applicat. only

4.Comm. Params

CONNECT (Modem)

1.Phone>

2.Prefix>

3.Via>Modem

4.Baud>33600

5.Dial>Tone

6.Gateway

7.Suffix

8.TCP/IP> NO

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

146

Download – Comm Params, Dial>

FUNCTION

DESCRIPTION

This menu function is specific to the download process it enables

you to switch from Dial tone to Pulse if needed.

STEP ACTION DISPLAY

1. From the Main Menu Press [7] to access

the Download Menu

2. Input the Password and Press [ENTER]

3. Press [ENTER] to continue

4. Press [ENTER] to continue

5. Press [4] for Communication Parameters

Continued on next page

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

ENTER PASSWORD:

ARE YOU SURE?

NO YES

18661234567

ENTR=YES, MENU=NO

Download

1.Parameters

2.Autoload

3.Applicat. only

4.Comm. Params

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

147

Download – Comm Params, Dial>, Continued

STEP ACTION DISPLAY

Press [5]

Each time [5] is pressed the display will

toggle from Tone to Pulse. Upon the

desired setting press [MENU] to return to

the download menu.

Note: Prompts will vary depending on current

setting.

7. Stop.

Download – Comm Params, Gateway>

FUNCTION

DESCRIPTION

This menu function allows you to set gateway communication

parameters if you are downloading through a gateway.

STEP ACTION DISPLAY

1. From the Main Menu Press [7] to access

the Download Menu

2. Input the Password and Press [ENTER]

3. Press [ENTER] to continue

Continued on next page.

CONNECT (Modem)

1.Phone>

2.Prefix>

3.Via>Modem

4.Baud>33600

5.Dial>Tone

6.Gateway

7.Suffix

8.TCP/IP> NO

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

ENTER PASSWORD:

ARE YOU SURE?

NO YES

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

148

Download – Comm Params, Gateway>, Continued

STEP ACTION DISPLAY

4. Press [ENTER] to continue

5. Press [4] for Communication Parameters

6. Press [6] for Gateway>

7. Input the desired Gateway phone

number then press [ENTER]

8. Press [MENU] to return to the Download

9. Stop.

18661234567

ENTR=YES, MENU=NO

Download

1.Parameters

2.Autoload

3.Applicat. only

4.Comm. Params

CONNECT (Modem)

1.Phone>

2.Prefix>

3.Via>Modem

4.Baud>33600

5.Dial>Tone

6.Gateway

7.Suffix

8.TCP/IP> NO

CONNECT (Modem)

1.Phone>

2.Exchange Pref>

3.Via>Modem

7.Suffix

Gateway:

Download

1.Parameters

2.Autoload

3.Applicat. only

4.Comm. Params

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

149

Download – Comm Params, Suffix

FUNCTION

DESCRIPTION

This menu function allows a suffix at the end of the download

phone number to access an outside line.

STEP ACTION DISPLAY

1. From the Main Menu Press [7] to access

the Download Menu

2. Input the Password and Press [ENTER]

3. Press [ENTER] to continue

4. Press [ENTER] to continue

5. Press [4] for Communication Parameters

6. Press [7] and then press [ENTER] for

Suffix>

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

ENTER PASSWORD:

ARE YOU SURE?

NO YES

18661234567

ENTR=YES, MENU=NO

Download

1.Parameters

2.Autoload

3.Applicat. only

4.Comm. Params

CONNECT (Modem)

1.Phone>

2.Prefix>

3.Via>Modem

4.Baud>33600

5.Dial>Tone

6.Gateway

7.Suffix

8.TCP/IP> NO

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

150

Download – Comm Params, Suffix, Continued

STEP ACTION DISPLAY

7. Input the desired Suffix then press

[ENTER]

8. Press [MENU] to return to the Download

9. Stop.

CONNECT (Modem)

1.Phone>

2.Exchange Pref>

3.Via>Modem

7.Suffix

Suffix:

Download

1.Parameters

2.Autoload

3.Applicat. only

4.Comm. Params

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

151

8. Communication

DESCRIPTION

This Main Menu has eight sub-menus pertaining to communication.

 Min. Retries  Dial: Tone  Exchange Prefix  Gateway

 Suffix  Via Line/Radio  Check Line  Dial Tone Check

Minimum Retries

FUNCTION

DESCRIPTION

This submenu function allows you to set the amount of times the

terminal dials for authorization or batching.

STEP ACTION DISPLAY

1. From the Main Menu press [8] to

access Communication.

2. Press [1]

3. Input the Minimum # of tries then

press [ENTER].

4. Stop.

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

COMM MENU

1. Min. retries>

2. DIAL : TONE

3. Exchange Pref>

4. Gateway>

5. Suffix>:

6. Via:Line/Radio

7. CHK LINE: ON

8. D. ToneChk: ON

COMM MENU

1. Min. Retries>

2. DIAL : TONE

3. Exchange Pref>

4. Gateway>

5. Suffix>:

6. Via:Line/Radio

7. CHK LINE: ON

8. D. ToneChk: ON

Min Num Tries:

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

152

Dial: Tone/Pulse

FUNCTION

DESCRIPTION

This submenu function allows you to set the terminal to dial via

pulse or touch-tone.

STEP ACTION DISPLAY

1. From the Main Menu Press [8] to access

Communication.

2. Press [2] for Dial: options.

Press [1] for Tone

Press [2] for Pulse

4. Stop.

DIAL TYPE:

1.Tone

2.Pulse

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

COMM MENU:

1. Min. Retries>

2. DIAL : TONE

3. Exchange Pref>

4. Gateway>

5. Suffix>:

6. Via:Line/Radio

7. CHK LINE: ON

8. D. ToneChk: ON

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

153

Exchange Prefix

FUNCTION

DESCRIPTION

This submenu function allows you to program the terminal to dial

an exchange prefix before a phone number, when needed.

STEP ACTION DISPLAY

1. From the Main Menu Press [8] to access

Communication.

2. Press [3] for Exchange Prefix.

3. Press [2] to add an exchange prefix.

4. Input the exchange prefix then Press

[Enter]

5. Stop.

EXCHANGE PREFIX

1. No

2. Yes

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

COMM MENU

1. Min. Retries>

2. DIAL : TONE

3. Exchange Pref>

4. Gateway>

5. Suffix>:

6. Via:Line/Radio

7. CHK LINE: ON

8. D. ToneChk: ON

EXCHANGE PREFIX

1. No

2. Yes

ENTER PREFIX:

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

154

Gateway

FUNCTION

DESCRIPTION

This menu option allows you to set communication parameters for

processing transactions through a gateway.

STEP ACTION DISPLAY

1. From the Main Menu Press [8] to access

Communication.

2. Press [4] for Gateway.

3. Press [2] then press [ENTER] to input

the gateway phone number.

4. Input the Gateway phone number then

Press [Enter]

5. Stop.

Gateway>

1. No

2. Yes

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

COMM MENU

1. Min. Retries>

2. DIAL : TONE

3. Exchange Pref>

4. Gateway>

5. Suffix>:

6. Via:Line/Radio

7. CHK LINE: ON

8. D. ToneChk: ON

Gateway>

1. No

2. Yes

ENTER GATEWAY:

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

155

Suffix

FUNCTION

DESCRIPTION

This submenu function allows you to program the terminal to dial a

suffix after a phone number, when needed.

STEP ACTION DISPLAY

1. From the Main Menu Press [8] to access

Communication.

2. Press [5] for Suffix.

3. Press [2] then press [ENTER] to add a

suffix.

4. Input the Suffix then press [Enter]

5. Stop.

SUFFIX>:

1. NO

2. YES

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

COMM MENU

1. Min. Retries>

2. DIAL : TONE

3. Exchange Pref>

4. Gateway>

5. Suffix>:

6. Via:Line/Radio

7. CHK LINE: ON

8. D. ToneChk: ON

SUFFIX>:

1. NO

2. YES

ENTER SUFFIX :

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

156

Via Line/Radio

FUNCTION

DESCRIPTION

This will program the terminal to process a transaction by radio

first. If no signal is received, the terminal will look for a phone line.

(This functionality is only available when the NURIT 8000 SECURE

is connected to the external Modem.) If the terminal will only be

using a phone line, because there is no signal in the area, then it

can be programmed for phone Line Only.

STEP ACTION DISPLAY

1. From the Main Menu Press [8] to access

Communication.

2. Press [6] for Via: Line/Radio.

Press [1] for both Radio and Phone Line.

Press [2] for phone line only.

4. After the selection has been made press [ENTER]

5. Stop.

The options are:

Via: Both – Will try to connect via the Radio first then via the phone line if radio is unsuccessful.

Via: Line Only – The terminal will dial out using only a Phone line.

LINE / RADIO

1. Both

2. Line Only

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

COMM MENU

1. Min. Retries>

2. DIAL : TONE

3. Exchange Pref>

4. Gateway>

5. Suffix>:

6. Via:Line/Radio

7. CHK LINE: ON

8. D. ToneChk: ON

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

157

CHECK LINE: ON

FUNCTION

DESCRIPTION

This menu function tells the terminal to check for a phone line

when attempting to dial out. (This functionality is only available

when the NURIT 8000 SECURE is connected to the external

Modem)

STEP ACTION DISPLAY

1. From the Main Menu Press [8] to access

Communication.

2. Press [6] for Via: Line/Radio.

Each time ENTER is pressed the display

will toggle between OFF & ON. Upon

desired setting press [MENU] to go back

to the idle prompt.

4. Stop.

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

COMM MENU

1. Min. Retries>

2. DIAL : TONE

3. Exchange Pref>

4. Gateway>

5. Suffix>:

6. Via:Line/Radio

7. CHK LINE: OFF

8. D. ToneChk: OFF

COMM MENU

1. Min. Retries>

2. DIAL : TONE

3. Exchange Pref>

4. Gateway>

5. Suffix>:

6. Via:Line/Radio

7. CHK LINE: ON

8. D. ToneChk: OFF

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

158

CHECK LINE: ON

FUNCTION

DESCRIPTION

This menu function tells the terminal to check for a phone line

when attempting to dial out. (This functionality is only available

when the NURIT 8000 SECURE is connected to the external

Modem)

STEP ACTION DISPLAY

5. From the Main Menu Press [8] to access

Communication.

6. Press [6] for Via: Line/Radio.

Each time ENTER is pressed the display

will toggle between OFF & ON. Upon

desired setting press [MENU] to go back

to the idle prompt.

8. Stop.

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

COMM MENU

1. Min. Retries>

2. DIAL : TONE

3. Exchange Pref>

4. Gateway>

5. Suffix>:

6. Via:Line/Radio

7. CHK LINE: OFF

8. D. ToneChk: OFF

COMM MENU

1. Min. Retries>

2. DIAL : TONE

3. Exchange Pref>

4. Gateway>

5. Suffix>:

6. Via:Line/Radio

7. CHK LINE: ON

8. D. ToneChk: OFF

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

159

Appendix A – Restaurant Tips and Tabs

Working Mode – TIP OPTIONS

FUNCTION

DESCRIPTION

This option allows you to include up to three tips per

transaction. This option will also allow you to name the tip

type for identification. For Tip Discounting, the option must

be enabled for each of the three tips where it is required.

The default tip amount will automatically be added to the

transaction if a New Rate amount is entered for tips 2 & 3.

For the Tip #1 default tip amount to be added, the tip option

must be set for “In Transaction”.

Note: For Restaurant, Tip #1 cannot be disabled.

STEP ACTION DISPLAY

1. From the Main MENU SCREEN press [5]

to access System Options.

2. Press [6] for Working Mode

3. Press [1] for Tip Options.

4. Input the Password and Press [ENTER]

Continued on next page

WORKING MODE:

1.Tip Option

2.AVS Option

3.Card Prsnt Opt

4.Cpmment Opt.

ENTER PASSWORD:

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

SYSTEM OPTIONS:

1.Set Time/Date

2.Edit PIN Key

3.Sel. Mstr Key

4.Set Batch No.

5.Edit Database

6.Working Mode

7.Test Mode

8.Predial Call

9.PinPad Init.

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

160

Working Mode – Tip Options, Continued

STEP ACTION DISPLAY

Use the [] and [] to scroll through tips

options, find the tip that you wish to edit

and then press [ENTER].

Press the number corresponding with your

selection.

Note: The current status is displayed in parenthesis.

Use the [] and []to scroll between Off

and On then press [ENTER] to select.

Note: Though Tip #1 is already on, select on to

continue.

Using the method described in Editing

Header, enter the 13-character tip

designation. Press [ENTER] when the

name has been entered.

Press [ENTER] without the modification to

keep the existing name.

Use the [] and []to scroll between Off

and On then press [ENTER] to select.

Note: To have the tip discount calculated, there

must be a Tip Discount percentage under

Report Setup in the Report Menu.

Use the [] and []to scroll between the

settings then press [ENTER] to select.

Note: See setting description below.

10. If Auto Percent is selected, enter the low

tip percentage then press [ENTER].

Continued on next page.

Tip 1 (ON)

1. OFF

2. ON

TIP 1 Name: 1 N

Tip

Discounted Tip:

1.OFF

2.ON

TIP 1 OPTIONS:

1.In Tip Menu

2.In Transaction

3.Auto Percent

TIP 1 OPTIONS:

1.In Tip Menu

2.In Transaction

3.Auto Percent

LOW % OF SUM

TIP OPTIONS:

1. Tip 1: (ON)

2. Tip 2: (OFF)

3. Tip 3: (OFF)

4. Tab op

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

161

Tip Options, Continued

STEP ACTION DISPLAY

11. Enter the high tip percentage then press

[ENTER].

12.

If desired, enter the default tip amount

then press [ENTER].

Press [ENTER] to bypass.

13. Stop.

In Tip Menu – Will not prompt for a tip amount when entering the transaction

and will print a blank tip line on the receipt.

In Transaction – Will prompt for a tip amount when entering the transaction.

Entered amount will print on the receipt. Pressing [ENTER] at prompt

will bypass tip entry and will print a blank tip line.

Auto Percent – Will not prompt for a tip amount when entering the transaction

and will print a blank tip line with suggested tip amount(s) below.

Tip : $0.00

New Rate: 0.00

TIP 1 OPTIONS:

1.In Tip Menu

2.In Transaction

3.Auto Percent

HIGH % OF SUM

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

162

Add Tips

FUNCTION

DESCRIPTION

This menu function allows you to go in and add the tips to a

transaction in the terminal’s database. This is used for Restaurant

transactions only.

STEP ACTION DISPLAY

From the idle prompt press the [F] and

[MENU/CANCEL] keys at the same time

to access the Tab Menu then press [1]

for Add Tips.

There are several options for editing and

adding tips*, use the arrow keys [] []

to make your selection then press

[ENTER].

Press the number corresponding with

your selection.

Use the [] and [] keys to scroll

through the transactions.

When the desired transaction is displayed

press [ENTER] to be prompted to add

the tip amount.

4. Key in the tip amount then press

[ENTER].

If the amount of the entered tip exceeds

to the Overage Tip parameter (defaults to

20% in the software model), a warning

message is briefly displayed.

Continued on next page.

TAB MENU:

1. Add Tips

2. Open a tab

3. Close a tab

4. Delete a tab

5. Show tabs

6. Tab Report

7. Open Tab Rprt

8. Close Tab Rprt

Add Tips:

3. Scroll Opened

4. By Server #

5. By Trans. #

6. By Card Type

7. By Card Num.

Tip : $0.00

2.00

#0001 SL 6.00

VISA 1104

Total Tip Exceeds

Tip Limit

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

163

Add Tips, Continued

STEP ACTION DISPLAY

Press [ENTER] to accept the overage

amount and continue or [MENU] to

re-enter the tip amount.

7. The total transaction amount will appear

briefly.

8. Stop

*Note: Scroll Opened will display only untipped transactions and therefore cannot be used

when adjusting a transaction with an existing tip.

Total : $8.00

Continue ?

ENTER=YES, MENU=NO

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

164

Working Mode – Tab Option

STEP ACTION DISPLAY

1. From the Main MENU SCREEN press [5]

to access System Options.

2. Press [6] for Working Mode

3. Press [1] for Tip Options.

4. Input the Password and Press [ENTER]

5. Press [4] for Tab Option.

Press [ENTER] to keep the current

default tab amount or enter desired

amount then press [ENTER].

7. Stop.

MENU SCREEN:

1.Reports

2.Merch. Params

3.Merch. Options

4.Hosts Params

5.System Options

6.Radio Params

7.Download

8.Communication

9.NOS Menu

SYSTEM OPTIONS:

1.Set Time/Date

2.Edit PIN Key

3.Sel. Mstr Key

4.Set Batch No.

5.Edit Database

6.Working Mode

7.Test Mode

8.Predial Call

9.PinPad Init.

WORKING MODE:

1.Tip Option

2.AVS Option

3.Card Prsnt Opt

4.Comment Opt.

ENTER PASSWORD:

TIP OPTIONS:

1. Tip 1: (ON)

2. Tip 2: (OFF)

3. Tip 3: (OFF)

4. Tab Option

Tab Amt: $ 50.00

0.00

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

165

Open a Tab

FUNCTION

DESCRIPTION

This menu function allows you to start or “open” a tab using a

preset amount.

STEP ACTION DISPLAY

From the idle prompt press the [F] and

[MENU/CANCEL] keys at the same time

to access the Tab Menu then press [2]

for Open a tab.

If the default preset tab amount is correct

press [ENTER] and skip to step 4.

If you wish to change the preset amount

press [MENU] and proceed to step 3.

3. Input the correct Tab Amount then press

[ENTER]

Swipe the credit card. Upon approval the

terminal will open the tab and assign it a

number.

If prompted, enter the server ID.

Using the stylus, have the customer

sign on the touch screen display.

6. Stop

Tab Amt: 50.00

ENTR=YES, MENU=NO

Enter Tab Amt

0.00

Swipe Credit Card

Account ----Æ

TAB MENU:

1. Add Tips

2. Open a tab

3. Close a tab

4. Delete a tab

5. Show tabs

6. Tab Report

7. Open Tab Rprt

8. Close Tab Rprt

Swipe Credit Card

Account ----Æ

ENTER SERVER ID

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

166

Close a Tab

FUNCTION

DESCRIPTION

This menu function allows you to close a tab. If tab is more than

preset amount, it will close for full amount, dialing automatically to

host. This will give you two transactions.

STEP ACTION DISPLAY

From the idle prompt press the [F] and

[MENU/CANCEL] keys at the same time

to access the Tab Menu then press [3]

for Close a tab.

There are several options for closing a

tab, use the arrow keys [] [] to make

your selection.

Press the number corresponding with

your selection.

Input the transaction # for the open tab

then press [ENTER].

Note: The display will vary depending on selection

4. When the open tab displays press

[ENTER] to continue.

5. Input the closing tab amount then press

[ENTER]

Continued on next page

#0002 OP 0.00

Auth. For 50.00

MasterCard 0803

Enter Tab Amt

0.00

Close a tab

3. Scroll Opened

4. By Server #

5. By Trans. #

6. By Card Type

7. By Card Num.

TAB MENU:

1. Add Tips

2. Open a tab

3. Close a tab

4. Delete a tab

5. Show tabs

6. Tab Report

7. Open Tab Rprt

8. Close Tab Rprt

Close a tab

3. Scroll Opened

4. By Server #

5. By Trans. #

6. By Card Type

7. By Card Num.

Transaction # ?

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

167

Close a Tab, Continued

STEP ACTION DISPLAY

The terminal will process the total tab

amount then prompt you to add a tip

amount.

Input the tip amount then press [ENTER]

The total amount will appear briefly and

then the display will return to the idle

Prompt.

8. Stop

Tip : $0.00

0.00

Total : $60.00

20.00

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

168

Delete a Tab

FUNCTION

DESCRIPTION This menu function allows you to delete (void) a tab.

STEP ACTION DISPLAY

From the idle prompt press the [F] and

[MENU/CANCEL] keys at the same time

to access the Tab Menu then press [4]

for Delete a tab.

There are several options for closing a

tab, use the arrow keys [] [] to make

your selection

Press the number corresponding with

your selection.

Input the transaction # for the tab you

wish to Void (delete) then press

[ENTER].

4. When transaction displays press [ENTER]

to continue.

5. Input the Password and Press [ENTER]

Press [ENTER] for YES

Press [MENU] for NO

Note:The actual Trans # will display.

7. Stop

ENTER PASSWORD:

#0002 TAB 0.00

Auth. For 50.00

MasterCard 0803

Void Trns #2 ?

ENTR=YES, MENU=NO

Delete a tab

Transaction # ?

TAB MENU:

1. Add Tips

2. Open a tab

3. Close a tab

4. Delete a tab

5. Show tabs

6. Tab Report

7. Open Tab Rprt

8. Close Tab Rprt

Delete a tab

3. Scroll Opened

4. By Server #

5. By Trans. #

6. By Card Type

7. By Card Num.

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

169

Show Tabs

FUNCTION

DESCRIPTION

This menu option allows you to scroll through all tabs in the

terminal database.

STEP ACTION DISPLAY

From the idle prompt press the [F] and

[MENU/CANCEL] keys at the same time

to access the Tab Menu then press [5]

for Show tabs.

There are several options for closing a

tab, use the arrow keys [] [] to make

your selection

Press the number corresponding with

your selection.

Use the arrow keys [] [] to scroll

through and view the open tabs in the

terminal’s database.

4. Press [MENU] to exit.

5. Stop.

TAB MENU:

1. Add Tips

2. Open a tab

3. Close a tab

4. Delete a tab

5. Show tabs

6. Tab Report

7. Open Tab Rprt

8. Close Tab Rprt

Delete a tab

3. Scroll Opened

4. By Server #

5. By Trans. #

6. By Card Type

7. By Card Num.

#0002 OP 0.00

Auth. For 50.00

MasterCard 0803

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

170

Tab Report

FUNCTION

DESCRIPTION

This menu option allows you to print a report of all tabs in the

terminal database regardless of their status.

STEP ACTION DISPLAY

From the idle prompt press the [F] and

[MENU/CANCEL] keys simultaneously to

access the Tab Menu then Press [6] for

Tab Report.

2. The tab report will begin printing.

3. Stop.

Open Tab Report

FUNCTION

DESCRIPTION

This menu option allows you to print a report of all open tabs in the

terminal database.

STEP ACTION DISPLAY

From the idle prompt press the [F] and

[MENU/CANCEL] keys at the same time

to access the Tab Menu then press [7]

for Open Tab Report.

2. The Open tab report will begin printing.

3. Stop.

Printing . . . . . . .

TAB MENU:

1. Add Tips

2. Open a tab

3. Close a tab

4. Delete a tab

5. Show tabs

6. Tab Report

7. Open Tab Rprt

8. Close Tab Rprt

TAB MENU:

1. Add Tips

2. Open a tab

3. Close a tab

4. Delete a tab

5. Show tabs

6. Tab Report

7. Open Tab Rprt

Printing . . . . . . .

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

171

Close Tab Report

FUNCTION

DESCRIPTION

This menu option allows you to print a report of all open tabs in the

terminal database.

STEP ACTION DISPLAY

From the idle prompt press the [F] and

[MENU/CANCEL] keys at the same time

to access the Tab Menu then press [8]

for Close Tab Report.

2. The close tab report will begin printing.

3. Stop.

TAB MENU:

1. Add Tips

2. Open a tab

3. Close a tab

4. Delete a tab

5. Show tabs

6. Tab Report

7. Open Tab Rprt

8. Close Tab Tprt

Printing . . . . . . .

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

172

POS STD and PLUS - NURIT 8000 SECURE QUICK REFERENCE GUIDE

To access the menu, press the [MENU] key. This key will enter and exit out of the menu. Use the [] and [] key to scroll the menu options.

1. REPORTS

1. DEFAULT REPORT Prints programmed default report.

2. CURRENT REPORT Prints a report of the current transactions: Offers several options: Used to change default report setup.

3. HISTORY REPORT Prints previous batch totals: Prints Combined or Per Batch totals: Maximum of 30 days.

4. DISPLAY TRANS.Displays current transactions offering different sorting options.

5. RECEIPT COPY Prints a copy of the last approved receipt. (Transaction must be last function performed.)

6. PERFORMANCE Prints percentage of Approvals, Denials, Disconnects, Manual Entries and Swipes: Reset option.

7. TIP REPORT Prints tip details for all servers or a specific server.

8. REPORT SETUP Offers option to print Visa/MC transactions together or separately: Setup tip discount.

9. RAM DISK REPORT *Prints a report listing the RAM Disk Size and max number of transactions for each EDC type.

10. COMMUNICATIONS

LOG REPORT *

Use this function to either print a communication log of the last transaction or batch processed or to

clear the log.

2. MERCHANT PARAMS

1. AUTHORIZATION Enables/disables different card and transaction types: Debit mode.

2. SECURITY LEVEL Sets security levels for different operations.

3. EDIT HEADER Edits the five line, 24 character header.

4. EDIT TRAILER Edits the five line, 24 character trailer.

5. SET CASH EDC Enables/disables recording of cash transactions.

6. MERCHANT FEE Enables and sets the surcharge rate for debit transactions.

7. SET BATCH TIME For Host Capture/Autobatch terminals, sets time terminal will print batch report.

8. SERVER/INVOICE Enables/disables Server, Invoice, Table and Guest No. Modes. (Table and guest for restaurant only).

9. SITE ID View or change Site ID.

3. MERCHANT OPTIONS

1. PAPER TYPE Offers choice between single ply, double ply or custom (two receipts for debit).

2. NOPAPER MODE Disables print function (integrated or stand alone).

3. BUZZER SET Enables/disables tone when pressing keypad.

4. OPERATION MODE Toggles between Normal and Demo Modes.

5. BATTERY SAVER Offers option of turning Radio Only, Terminal Only, Radio and Terminal or neither off after a period of

inactivity.

6. PRINT DISCLAIMER Enables/disables print of the disclaimer on each receipt.

7. SET MENU TYPE Toggles between manual scroll and auto scroll.

8. SET HALO Maximum dollar limit for a Sale, Return or Cash Back.

9. PRINT SETUP Prints terminal setup report listing; Current application, Header, Trailer, Card and transaction types,

Paper type, Surcharge, Security settings, PIN Pad info, HALOs, Modes, Tip settings and Hot Keys.

10. STORE & FORWARD Enables/disables offline settings: Upload transactions: Resend/delete failed transactions.

11. CHECK READER Enables/disables check imaging for upload to the Web.

12. SIGNATURE OPTION *Initializes an E-Pad allowing the capture of signatures for upload to the Web.

13. BRIDGE COMM *Allows communication between terminal and web.

14. LANGUAGE SETUP *Choose from the available languages for display or printer.

4. HOST PARAMS

1. HOST PARAMS Edit parameter settings for all hosts.

2. HOST PHONES Edits authorization and batch phone numbers for all hosts.

3. PRINT EDC SETUP Prints EDC report listing; EDC types available, All EDC hosts, Capture types, Host parameters, Radio

information (when applicable), AutoDial settings.

4. PROTOCOL VER.Displays host protocol name and version.

5. AUTODIAL SETUP Sets the terminal to automatically dial out for manual batching.

6. HOST RADIO ADDR.Displays programmed host radio address.

Continued on next page.

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

173

QUICK REFERENCE GUIDE, Continued

5. SYSTEM OPTIONS

1. SET TIME / DATE Sets terminal’s date (mm/dd/yy) and time (hh:mm:00): Clock is 24 Hour/Military time.

2. EDIT PIN KEY Edit host processor working key for debit processing.

3. SEL. MSTR KEY Change Master Key location.

4. SET BATCH NO.Change the current batch number.

5. EDIT DATABASE Void transaction: Clear database for selected or all EDC Types.

6. WORKING MODE Offers the ability to set: Tip options for retail and restaurant; AVS Option; Card Present Options and

Comment Option.

7. TEST MODE Programming purposes only.

8. PREDIAL CALL Enables/disables terminal dialing immediately once card is swiped.

9. PINPAD INIT.Initialize external PIN Pad when necessary.

10. PINPAD FUNC.Allows encryption of working key in terminal

11. PINPAD CONFIG.Toggles between internal or external PIN Pad.

12. STATUS BAR Enables and Disables the Status Bar Display.

6. RADIO TEST

1. RADIO TESTS Mobitex Units: Signal strength; MAN or ILL number; Radio Information

2. PRINT PARAMS Mobitex Units: Prints radio type; MAN/LLI number; Radio addresses.

3. BATTERY TEST Tests the battery.

7. DOWNLOAD

1. PARAMETERS Downloads host and merchant parameters only.

2. AUTOLOAD Downloads full application and parameters.

3. APPLICAT. ONLY Downloads application only, no host or merchant parameters.

4. COMM. PARAMS Sets communication parameters for downloading.

8. COMMUNICATIONS

1. MIN. RETRIES Number of times the terminal will call host processor before timeout.

2. DIAL : TONE Sets pulse or tone (DTMF) dialing.

3. EXCHANGE PREF Enables/disables and stores digit for dialing an exchange prefix before phone number.

4. GATEWAY Programming purposes only

5. SUFFIX Enables/disables and stores digit for dialing a suffix after phone number.

6. VIA: LINE / RADIO Not relevant for the NURIT 2085.

7. CHK LINE: ON Enables/disables the check line function.

8. D. TONECHK: ON Enables/disables the dial-tone check function.

*NOTE: These features are available with POS_PLUS application only.

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

174

BASIC TROUBLESHOOTING

This section briefly describes how to troubleshoot some possible common problems that may

rise during the normal operation of the NURIT 8000 Series. Before requesting service for this

unit, check the list below for a possible cause of the problem you are experiencing. Some

simple checks on your part may solve the problem, and restore proper operation. If you are

still unable to solve the problem, contact the technical support help desk. Do NOT try to solve

the problem by opening the terminal yourself!

Terminal Seems

to Have No

Power

x Try pressing <F> and <MENU> keys simultaneously.

x Allow the battery to charge 10 to 12 hours with the terminal on and AC

adapter plugged into the wall (in standby mode).

“NO LINE”

Appears on the

Display

x Make sure that you are receiving radio coverage in the area where you

are located.

Printer Does

Not Function

Properly

x Check that the paper has been fed to the printer properly (underhand).

The NURIT 8000 SECURE uses thermal paper only.

x Check there is paper in the printer compartment. Replace if required.

x If printer continues working even though the paper has been used up,

check that the ‘end of paper’ detector in the printer mechanism is not

blocked by a torn piece of paper.

Card Reader

Not Working

x Make sure that card has been swiped so that its magnetic strip is facing

downward and facing to the front.

x Contact the technical support help desk.

Receipt Prints

“CANCELED”

x The terminal will display a host response, or some type of error

message, as to why the transaction was canceled.

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

175

Appendix B - Lipman USA Licensing Agreement

8000 Series POS EDC Terminals

END-USER LICENSE AGREEMENT FOR LIPMAN USA SOFTWARE

IMPORTANT-READ CAREFULLY: This Lipman End-User License Agreement (“EULA”) is a legal

agreement between you (either an individual or a single entity) and Lipman USA, Inc. (“Lipman”) for the

Lipman Software Product identified above, which may include associated media, printed materials, and

“online” or electronic documentation (“Software Product”). By installing, copying, or otherwise using the

Software Product, you agree to be bound by the terms of this EULA. If you do not agree to the terms of this

EULA, do not install, copy or use the Software Product and return the product to our attention at the address set

forth below for a full refund.

SOFTWARE PRODUCT LICENSE

The Software Product is protected by copyright laws and international copyright treaties, as well as other

intellectual property laws and treaties. The Software Product is licensed, not sold.

1. GRANT OF LICENSE. This EULA grants you the following rights:

x Software License. Lipman grants you the non-exclusive right to make and use, solely in connection

with your use of Lipman terminals, a number of copies of the Software Product equal to the number of

Lipman [insert name of terminal] terminals validly purchased by you. You may also make copies of

the Software Product for backup and archival purposes.

x Distribution. Lipman grants you a non-exclusive, royalty-free right to reproduce and distribute an

unlimited number of copies of the Software Product, solely for use in connection with Lipman

terminals, provided that you: (a) distribute the Software Product in object code form only as part of a

software product created by you for use with Lipman terminals, that adds significant and primary value

to the Software Product (the “Licensed Product”); provided such Licensed Product complies with all

applicable laws, rules and regulations, including without limitation, all VISA, MasterCard and other

association rules and regulations; (b) do not use Lipman’s name, logo, or trademarks to market the

Licensed Product; (c) will not permit further distribution of the Software Product by your end-user

customers; (d) include a valid copyright notice on the Licensed Product sufficient to protect Lipman’s

users only pursuant to your end user license agreement; (f) indemnify, hold harmless, and defend

Lipman from and against any claims or lawsuits, including attorney’s fees, that arise or result from the

use or distribution of your Licensed Product; (g) otherwise comply with the terms of this EVLA; and

(h) agree that Lipman reserves all rights not expressly granted. No license is granted to you in the

source code of the Software Product.

2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS.

Not for Redistribution Software. If the Software Product is labeled “Not for Redistribution” or “NFR,” then,

notwithstanding other sections of this EULA, you may not resell, sublicense, or otherwise transfer for value, the

Software Product by itself or as part of a Licensed Product.

Continued on next page

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

176

Appendix B - Lipman USA Licensing Agreement, Continued

* Maintenance of Copyright Notices. You must not remove or alter any copyright notices on all copies of the

Software Product.

* Limitations on Reverse Engineering, Decompilation, and Disassembly. Neither you nor your end-user

customers may reverse engineer, decompile, disassemble or otherwise attempt to discover the source code of

the Software Product, except and only to the extent that such activity is expressly permitted by applicable law

notwithstanding this limitation.

*Separation of Components. The Software Product is licensed as a single product. Its component parts may

not be separated for use on more than one terminal.

* Performance or Benchmark Testing. You may not disclose the results of any benchmark test of the Software

Product to any third party without Lipman’s prior written approval.

* Support Services. Lipman may provide you with support services related to the Software Product (“Support

Services”), use of Support Services is governed by the Lipman policies and programs described in the user

manual, in “online” documentation, and/or in other Lipman-provided materials. Any supplemental software

code provided to you as part of the Support Services shall be considered part of the Software Product and

subject to the terms and conditions of this EULA. With respect to technical information you provide to Lipman

as part of the Support Services, Lipman may use such information for its business purposes, including for

product support and development. Lipman will not utilize such technical information in a form that personally

identifies you.

Software Transfer. You may permanently transfer all of your rights under this EULA (i) only in conjunction

with a permanent transfer of your validly purchased Lipman terminals; (ii) provided you retain no copies;

(iii) you transfer all of the Software

Product (including all component parts, the media and printed materials, and any upgrades); and (iv) the

recipient agrees to the terms of this EULA. If the Software Product is an upgrade, any transfer must include all

prior versions of the Software Product.

* Termination. Your rights under this EULA terminate upon the termination of your right to use the Lipman

terminal being used in connection with the Software Product. Without prejudice to any other rights, Lipman

may terminate this EULA if you fail to comply with the terms and conditions of this EULA. In such event, you

must destroy all copies of the Software Product and all of its component parts.

3. UPGRADES

If the Software Product is labeled as an upgrade, you must be properly licensed to use a product identified

by Lipman as being eligible for the upgrade in order to use the Software Product. A Software Product

labeled as an upgrade replaces and/or supplements the product that formed the basis for your eligibility for

the upgrade. You may use the resulting upgraded product only in accordance with the terms of this EULA.

If the Software Product is an upgrade of a component of a package of software programs that you

licensed as a single product, the Software Product may be used and transferred only as part of that single

product package and may not be separated for use on more than one terminal.

Continued on next page

APPLICATION POS-STD AND POS-PLUS - QSP NURIT 8000 SECURE

User Guide

177

Lipman USA Licensing Agreement, Continued

4. COPYRIGHT

All title, including but not limited to copyrights, in and to the Software Product and any copies thereof

are owned by Lipman or its suppliers. All title and intellectual property rights in and to the content

which may be accessed through use of the Software Product is the property of the respective content

owner and may be protected by applicable copyright or other intellectual property laws and treaties.

This EULA grants you no rights to use such content.

5. U.S. GOVERNMENT RESTRICTED RIGHTS

The Software Product is provided with RESTRICTED RIGHTS. Use, duplication, or disclosure by the

Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical

Data and Computer Software Clause at DFARS 252.227-7013 or subparagraphs (c)(1) and (ii) of the

Commercial Computer Software Restricted Rights at 48 CFR 52.227-19, as applicable. Manufacturer

is Lipman USA, Inc., 50 Gordan Drive, Syosset, New York 11791.

6. EXPORT RESTRICTIONS

You agree that you will not export or re-export the Software Product to any country, person, entity or

end user subject to U.S.A. export restrictions. Restricted countries currently include, but are not

necessarily limited to Cuba, Iran, Iraq, Libya, North Korea, Sudan, and Syria. You warrant and

represent that neither the U.S.A. Bureau of Export Administration nor any other federal agency has

suspended, revoked or denied your export privileges.

7. NO WARRANTIES.

Lipman expressly disclaims any warranty for the Software Product. THE SOFTWARE PRODUCT IS

PROVIDED “AS IS” WITHOUT WARRANTY OR CONDITION OF ANY KIND, EITHER

EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES

OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-

INFRINGEMENT. THE ENTIRE RISK ARISING OUT OF USE OR PERFORMANCE OF THE

SOFTWARE PRODUCT REMAINS WITH YOU.

8. LIMITATION OF LIABILITY

In no event shall Lipman or its suppliers be liable for any damages whatsoever (including, without

limitation, damages for loss of business profits, consequential or incidental damages, business

interruption, loss of business information, or any other pecuniary loss or expense) arising out of the use

of or inability to use the Software Product, even if Lipman has been advised of the possibility of such

damages. Because some states and jurisdictions do not allow the exclusion or limitation of liability for

consequential or incidental damages, the above limitation may not apply to you.

MISCELLANEOUS

This EULA is governed by the laws of the State of New York, excluding the application of its conflict of

laws rules. In the event of any dispute arising from or relating to this EULA, the parties hereto irrevocably

consent to the personal jurisdiction of the courts located in New York, New York, which shall be the

exclusive venue for any such dispute. The United Nations’ Convention on International Sale of Goods does

not apply. This EULA sets forth the entire understanding and agreement between you and Lipman and may

be amended only in a writing signed by both parties.

8000 POS STD PLUS SECURE QSP 4.82 NURIT Credit Card Terminal User Manual

Navigation menu

Versions of this User Manual:

Views

Navigation