Harlequin RIP OEM Manual 8.3 Release Navigator 9 User

Navigator 9 User Manual Navigator 9 User Manual

User Manual: Navigator 9 User Manual

Open the PDF directly: View PDF .
Page Count: 444

Download
Open PDF In Browser	View PDF

0

Navigator RIP

User Manual
Version 9
November 2011

for Windows

Copyright and Trademarks
Harlequin PLUS Server RIP
June 2011
Document issue: 106
Copyright ¬© 2011 Global Graphics Software Ltd. All rights reserved.
Certificate of Computer Registration of Computer Software. Registration No. 2006SR05517
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Global Graphics Software
Ltd.
The information in this publication is provided for information only and is subject to change without notice. Global Graphics
Software Ltd and its affiliates assume no responsibility or liability for any loss or damage that may arise from the use of any
information in this publication. The software described in this book is furnished under license and may only be used or copied in accordance with the terms of that license.
Harlequin is a registered trademark of Global Graphics Software Ltd.
The Global Graphics Software logo, the Harlequin at Heart Logo, Cortex, Harlequin RIP, Harlequin ColorPro, EasyTrap,
FireWorks, FlatOut, Harlequin Color Management System (HCMS), Harlequin Color Production Solutions (HCPS),
Harlequin Color Proofing (HCP), Harlequin Error Diffusion Screening Plugin 1-bit (HEDS1), Harlequin Error Diffusion
Screening Plugin 2-bit (HEDS2), Harlequin Full Color System (HFCS), Harlequin ICC Profile Processor (HIPP), Harlequin
Standard Color System (HSCS), Harlequin Chain Screening (HCS), Harlequin Display List Technology (HDLT), Harlequin
Dispersed Screening (HDS), Harlequin Micro Screening (HMS), Harlequin Precision Screening (HPS), HQcrypt, Harlequin
Screening Library (HSL), ProofReady, Scalable Open Architecture (SOAR), SetGold, SetGoldPro, TrapMaster, TrapWorks,
TrapPro, TrapProLite, Harlequin RIP Eclipse Release and Harlequin RIP Genesis Release are all trademarks of Global
Graphics Software Ltd.
Protected by U.S. Patents 5,579,457; 5,808,622; 5,784,049; 5,862,253; 6,343,145; 6,330,072; 6,483,524; 6,380,951;
6,755,498; 6,624,908; 6,809,839.
Other U.S. Patents Pending
Protected by European Patents 0 803 160; 0 772 934; 0 896 771; 672 29 760.8-08.
Portions licensed under U.S. Patent No. 5,212,546; 4,941,038.
TrueType is a registered trademark of Apple Computer, Inc.
The ECI and FOGRA ICC color profiles supplied with this Harlequin RIP are distributed with the kind permission of the ECI
(European Color Initiative) and FOGRA respectively, and of Heidelberger Druckmaschinen AG (HEIDELBERG).
The IFRA ICC profiles supplied with this Global Graphics Software are distributed with the kind permission of IFRA and of
GretagMacbeth.
International Cooperation for Integration of Processes in Prepress, Press and Postpress, CIP4, Job Definition Format, JDF
and the CIP4 logo are trademarks of CIP4.
Adobe, Adobe Photoshop, Adobe Type Manager, Acrobat, Display PostScript, Adobe Illustrator, PostScript, Distiller and
PostScript 3 are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other
countries which may be registered in certain jurisdictions.
Global Graphics Software Ltd is a licensee of Pantone, Inc. PANTONE Colors generated by ScriptWorks are four-color process simulations and may not match PANTONE-identified solid color standards. Consult current PANTONE Color Publications for accurate color. PANTONE , Hexachrome , and PANTONE CALIBRATED‚Ñ¢ are trademarks of Pantone, Inc. ¬©
Pantone, Inc., 1991.
¬Æ

¬Æ

¬Æ

Other brand or product names are the registered trademarks or trademarks of their respective holders.

Navigator RIP v9.0: November 2011

User Manual

iii

US Government Use
Harlequin RIP software is a computer software program developed at private expense and is subject to the following Restricted Rights Legend: ‚ÄúUse, duplication, or disclosure by the United States Government is subject to restrictions as set forth in (i) FAR 52.227-14 Alt III or (ii) FAR 52.227-19, as applicable. Use by
agencies of the Department of Defense (DOD) is subject to Global Graphics Software‚Äôs customary commercial license as contained in the accompanying
license agreement, in accordance with DFAR 227.7202-1(a). For purposes of the FAR, the Software shall be deemed to be ‚Äòunpublished‚Äô and licensed with
disclosure prohibitions, rights reserved under the copyright laws of the United States.‚Äù Global Graphics Software Incorporated, 31 Nagog Park, Suite 315,
Acton MA 01720.

iv

User Manual

Navigator RIP v9.0: November 2011

Preface 1

Introduction to the Navigator RIP 7
1.1
1.2
1.3

What is the Navigator RIP? 7
Why use the Navigator RIP? 8
The Navigator RIP in depth 9

Running the Navigator RIP 25
2.1
2.2
2.3
2.4
2.5
2.6

Machine requirements 25
Installing printer interface cards 29
Navigator RIP folder structure 29
Starting up the Navigator RIP 33
Menus affected by optional features 39
Stopping the Navigator RIP 41

Getting Started with the Navigator RIP 43
3.1
3.2
3.3
3.4

A simple Navigator RIP session 43
A more complex use of the Navigator RIP 52
Using the Navigator RIP with a spool folder 54
Monitoring the Navigator RIP 55

Navigator RIP Output Methods 57
4.1
4.2
4.3
4.4
4.5

Historical overview 57
Page buffering modes 57
The throughput system 59
Advanced details of page buffering modes 70
Page buffering modes: a summary 73

Configuring Output Formats 75
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
5.10
5.11
5.12
5.13
5.14

Creating and managing Page Setups 75
Page Setup Manager dialog box 76
Edit Page Setup dialog box 77
Selecting different devices 80
Sending output to the screen 82
Output to Preview 86
Output to None 87
Output to TIFF 87
Output to PDF Raster 100
Sending output to a printer 105
ProofReady plugins 106
Multiple device output plugins 107
Output plugin dialog boxes 110
Separations, Screening and Color 110

5.15
5.16
5.17
5.18
5.19
5.20
5.21
5.22
5.23
5.24
5.25
5.26
5.27
5.28

Advanced Media Saving 112
Media and time saving using optimization 119
Default page size 120
Margins 120
Printing effects 121
Control strip 122
Scaling the image 132
Features 133
Cassette management 135
Page Setup Options 135
Page Setup Option Extras 140
PDF Options 143
Calibration 143
XPS Options 145

Screening 147
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
6.10
6.11
6.12

Managing separations styles 147
Separations Manager dialog box 147
Edit Style dialog box 149
Halftoning 149
Screen angles 154
Dot shapes 156
Halftone frequency 159
Screening options and number of gray levels 159
Job settings and Navigator RIP settings 163
Harlequin Precision Screening 164
Screening Library 170
Automatic detection of color separations 176

Configuring the RIP 177
7.1
7.2
7.3
7.4

Configure RIP dialog box 178
How the Navigator RIP controls files 178
Control of page buffering modes 179
Job timeout 182

7.5
7.6
7.7
7.8
7.9
7.10
7.11
7.12
7.13

Threads and parallel processing 182
Printer buffer size 184
Extras 185
Specifying prep files 186
Navigator RIP memory allocation 186
Minimum free disk space 188
Disable sounds 188
Resetting the Navigator RIP to default values
Choosing the user interface language 188

188

Configuring Input 191
8.1
8.2
8.3
8.4
8.5
8.6
8.7
8.8
8.9
8.10
8.11
8.12
8.13
8.14
8.15
8.16
8.17
8.18
8.19
8.20
8.21

Input management 192
Managing input plugins 193
Using the AppleTalk input plugin 196
Using the NT Pipe input 197
Using the Spool Folder input folder 200
Using the Socket input plugin 205
Using the Asynchronous Socket plugin 210
Using the Asynchronous Socket Quit plugin 211
Using the Serial input plugin 211
Using more than one method 216
Using the Print File command 216
Printing PostScript language files 217
Printing PDF files 218
Printing XPS Documents 230
Printing HD Photo images 231
Printing JPEG and JFIF files 231
Printing GIF files 232
Printing TIFF/IT files 232
Printing TIFF 6.0 files 235
Printing page buffer files 237
Entering PostScript language code by hand 239

Media Management 241
9.1
9.2
9.3
9.4

Why manage your media? 241
Advancing and cutting media interactively 243
Advancing and cutting media automatically 245
Monitoring media 249

Simple Imposition 259
10.1
10.2

What is Simple imposition? 259
Input file formats 259

10.3
10.4
10.5
10.6

How to activate Simple imposition 260
The Imposition Manager 260
Configuring Simple imposition 261
Example impositions 276

Fonts 287
11.1
11.2
11.3
11.4
11.5
11.6
11.7
11.8
11.9
11.10
11.11
11.12
11.13

Supplied fonts 287
Types of font 288
The DLD1 format 289
Installing fonts in the Navigator RIP 289
Pre-loading fonts 292
Producing a list of installed fonts 292
Proofing fonts 292
Removing fonts 294
Composite fonts (Type 0) 295
Font substitution 295
The HqnFontSetStubs start up files 296
Font backup 297
Font Emulation 297

Calibration 301
12.1
12.2
12.3
12.4
12.5
12.6
12.7
12.8
12.9
12.10
12.11
12.12

Why calibration is needed 301
Calibration and linearization 303
Calibration in the Navigator RIP 303
Example procedure 305
Editing calibration sets 313
Consistency of calibration 316
Tone curves 317
Press calibration 318
Using a combination of calibration sets 320
Print Calibration dialog box 321
Calibration Manager dialog box 323
Edit Calibration dialog box 327

Color Separation 335
13.1
13.2
13.3
13.4
13.5
13.6
13.7
13.8
13.9
13.10
13.11

Introduction 335
What color separations are 338
Producing color images from separations 341
How color separations are produced 342
Creating and managing separations 344
Separations Manager dialog box 344
Edit Style dialog box 347
Color Setup 354
Color separation angles in job 364
Trapping features 365
Pages in the Output Controller 366

Appendix A

Troubleshooting

369

Appendix B

Jobs Containing Color Management Data

385

Appendix C

Using Genlin

389

Glossary

397

Preface

The Navigator RIP is an interpreter and renderer for multiple page description languages. This manual
is a complete guide to using the Navigator RIP, and provides technical details when necessary. For
details of how to install the RIP, see the separate Installation Guide.
This manual is intended for anyone using or evaluating Navigator RIP for PC platforms running
Microsoft Windows Server 2003, Windows Server 2008, Windows Server 2008 (R2), Windows XP,
Windows Vista and Windows 7. The guide covers the features of the Navigator RIP in a structured
way, giving examples that show you how to perform a wide variety of useful tasks in the RIP. For
more details about the other versions of RIPs available, see Chapter 1, Introduction to the Navigator
RIP.
For information about Navigator Server, Clients, output device interfaces and other related products,
see our online library of documentation at http://www.xitron.com/support/technical-documents/.

Contents of this manual
This manual discusses basic concepts at an early stage, leaving more complex issues for the later
chapters. In addition, each chapter starts with a basic description of the relevant features before
describing in detail the more technical issues involved.
Changes to Navigator RIP version 9 include:


Leasing and installment plan.



Try Before You Buy upgrades.



Demonstration dongle expiry.



Negative ROAM option.



Push Interface for calibration.



Remove Enfocus Status check support.



Add support for Windows Server 2008 (R2).

Changes to Navigator RIP version 8.3 include:


Support for Windows 7 32-bit and 64-bit.

Navigator RIP version 9

User Manual

1



Support for Windows 2000 dropped.



NT Print plugin not supplied or supported.





AppleTalk plugin not supplied for Windows Vista or Windows 7 because the AppleTalk protocol is not supported on those operating systems.
Addition of the Detect input separations by screen angle check box. See Input Separation
Detection angles in Job options in Color Setup dialog box on page 358.

Changes to Navigator RIP version 8.2 include:


PDF/X versions have been updated. See Printing PDF files on page 218.



PDF v1.7 ExtensionLevel: 3 support. See Printing PDF version 1.7 on page 221.

Changes to Navigator RIP version 8.1 include:




The Configure RIP Options dialog has changed. See Section 7.1, Configure RIP dialog box and
Section 7.3, Control of page buffering modes.
Information on multi-threading see Section 7.5.1, Multi-threading and Section 7.5.1.1, Memory
per renderer thread.



Updates to PDF Raster output. See Section 5.9, Output to PDF Raster.



The NT Print plugin is installed by the separate Plugins installer.

Changes to Navigator RIP version 8.0 include:


Information on Multi-threading. See Section 7.5, Threads and parallel processing.



Support for the XPS Document format. See Section 5.28, XPS Options.



Support for PDF 1.7. See Section 8.13, Printing PDF files.



Addition of the PDF raster output plugin. See Output to PDF Raster on page 100.



The JDF Enabler chapter has been removed. All material relating to the JDF Enabler can be
found in the JDF Enabler User Guide.

The first three chapters contain information about what the Navigator RIP does, and how to get it up
and running on your machine.
Chapter 1, Introduction to the Navigator RIP, gives a description of what the RIP does and the
kind of tasks for which you can use it. This chapter also gives a broad overview of the different
versions of RIP that are available.
Chapter 2, Running the Navigator RIP, describes your machine requirements, and how to start
up the Navigator RIP once it is installed.
Chapter 3, Getting Started with the Navigator RIP, describes the most fundamental elements of
the system. It shows you how to do useful work without learning a large number of new skills.
The next four chapters form a more comprehensive account of the software.

2

User Manual

Navigator RIP version 9

Chapter 4, Navigator RIP Output Methods, introduces the different ways in which the RIP can
operate, and how you can get the best performance out of the software for the jobs you are running. The chapter moves from general principles to more specific examples of the best way to
use the RIP.
Chapter 5, Configuring Output Formats, describes the flexibility the Navigator RIP provides
for configuring the appearance of any printed page. The tools described in this chapter will be
used on a regular basis, and are important for anyone who will make extensive use of the
product.
Chapter 6, Screening, explains the control the Navigator RIP gives you over screening techniques. This chapter includes a complete description of using Harlequin Precision Screening.
Chapter 7, Configuring the RIP, shows you how you can configure the Navigator RIP to give
the best performance in your environment. You will probably want to experiment with the
options described in this chapter, but once you are satisfied that the RIP is running as you want
it, you will not need to alter them on a regular basis.
The later chapters of the manual deal with specific facilities that the Navigator RIP offers, and may be
used as reference.
Chapter 8, Configuring Input, describes the different ways in which you can send postscript
language code and other forms of job as input to the Navigator RIP, either working on a standalone machine, or as part of a network.
Chapter 9, Media Management, gives you complete details of the media management facilities
available in the Navigator RIP.
Chapter 10, Simple Imposition, provides details on how to use the imposition features of the
Navigator RIP.
Chapter 11, Fonts, describes the use that the Navigator RIP makes of fonts, the different font
formats that are available, and the special built-in facilities that the RIP has to make handling
fonts easy and more efficient.
Chapter 12, Calibration, discusses the ways in which the Navigator RIP can help you ensure
accurate calibration of your output.
Chapter 13, Color Separation, describes the facilities the Navigator RIP provides for controlling the printing of individual colorants in both composite and separated output.
Appendix A, Troubleshooting, provides solutions to common problems that occur when running the Navigator RIP.
Appendix B, Jobs Containing Color Management Data describes how jobs and images with
attached color management data interact with related settings in the Navigator RIP.
Appendix C, Using Genlin describes a utility program providing semi-automatic measurement
of calibration targets generated by the Navigator RIP.
Lastly, the Glossary explains terminology used throughout the manual.

Navigator RIP version 9

User Manual

3

Assumptions
The Navigator RIP runs in the Microsoft Windows Server 2003, Windows Server 2008, Windows
Server 2008 (R2), Windows XP, Windows Vista and Windows 7 environments. It is important that you
are familiar with the appropriate operating system, at least to the level of using the file Explorer and a
simple text editor or word processor such as Notepad or WordPad. If you are not, please refer to the
Microsoft Help or manuals.
In complex installations, you may wish to send jobs between PCs, Macintosh computers, and computers running the UNIX operating system. This manual describes the details special to the Navigator
RIP, but not the fundamentals of networking connections and services. You are likely to require assistance from technical support staff for initial configuration and occasional maintenance of such installations.

Conventions
This manual uses some conventions to make it clear where you give keyboard commands or choose
from the menus and dialog boxes, as described in the following sections.

The keyboard
You can execute many of the commands available in the Navigator RIP either by using the mouse or
by using a keyboard shortcut. This is a combination or sequence of key presses that executes a command without you having to choose a menu option with the mouse. Keyboard shortcuts for individual
commands are discussed, in context, throughout the manual.


Shift


The Shift key is often used when selecting a group of objects from a list. For example, when selecting
a group of files to print. It is also used in keyboard shortcuts and in some mouse actions.


Ctrl


The Control key is used in keyboard shortcuts and in some mouse actions. For example, you can often
hold down Control while pressing another key or a mouse button. Whenever this manual describes
one of these actions, the text shows which key or mouse button to use: for example, when you can use
the Control key and the letter key K in combination, the text shows Ctrl+K.
The Control key is also used when selecting several objects from a list that do not form a contiguous
block. For example, you can use this key when selecting a number of files to print.
Some keyboard shortcuts are specific to a particular window and only operate when that window is
active. When using a windowing system, ensure that the relevant window is active before using one of
these keyboard shortcuts.

Fonts and formats
The following fonts and styles are used throughout this documentation.

4

User Manual

Navigator RIP version 9

1. Paragraphs that are numbered and use this font contain instructions which you should follow in
the shown order.
Text written in this sans-serif bold face represents a menu title, a menu item, or a control item in a RIP
dialog box. Text including an angle bracket ( > ) indicates both a menu and the option in that menu.
For example: ‚Äúchoose the Navigator RIP > Start Inputs option‚Äù is a shorthand method of referring
to the Start Inputs menu option in the Navigator RIP menu.
Text written in this typewriter face represents a piece of PostScript language code, a file name, or text
displayed by the Navigator RIP.
If a term is written in italic, it is the first mention of an important concept. This concept is explained in
the text immediately following, in the glossary, or both.
Note: Text indicated by starting with a bold word in the left margin is important and should be read
carefully. A Note, like this one, is often a suggestion that may save you work, improve performance,
or improve the quality of output.
Warning: Like a Note, a Warning is important and often indicates the need for care to avoid loss of
files or settings.

Navigator RIP version 9

User Manual

5

6

User Manual

Navigator RIP version 9

1
Introduction to the Navigator RIP
This chapter provides an introduction to the capabilities of the Navigator RIP.


What is the Navigator RIP? on page 7 defines the Navigator RIP.



Why use the Navigator RIP? on page 8 describes the advantages of using the Navigator RIP.



The Navigator RIP in depth on page 9 describes various features of the Navigator RIP.

1.1 What is the Navigator RIP?
The Navigator RIP is an application that takes a document or job describing images or pages and produces output from that job on an output device which can be a printer, imagesetter, computer screen,
or a file on disk. The term output device is used throughout this manual, except where the nature of the
device is important.
In general, a software application or hardware device that performs this task is known as a Raster
Image Processor (RIP) or, where the PostScript language is involved, a PostScript language compatible interpreter.
¬Æ

The Navigator RIP is a software RIP management system. It contains both a software RIP and a collection of supporting functions that help the RIP perform its task efficiently. For example, the RIP
accepts jobs from various sources, handles previewing and output of processed pages, and performs
the associated file handling.

1.1.1 Input and output formats
The Navigator RIP accepts jobs and produces output in several formats, with the exact options
depending on your configuration of the RIP.
The range of input formats includes: PostScript language and Encapsulated PostScript (EPS) files,
Portable Document Format (PDF) files, XML Paper Specification (XPS) files, (16-bit) TIFF 6.0 baseline files, and JPEG and JFIF files. The Navigator RIP supports modern versions of these files including PostScript LanguageLevel 3, PDF versions up to and including 1.7, and derived standards such as
PDF/X. The RIP also has controls for special handling of older versions of these files if necessary.
The Navigator RIP can produce output in a variety of formats, to suit various physical output devices
and file formats. The ability to produce TIFF 6.0 files is a standard feature but it is easy to add output

Navigator RIP version 9

User Manual

7

Introduction to the Navigator RIP

options for other formats such as TIFF/IT-P1 files and CIP3 PPF files. Similarly, there are options for
output to many proofing printers and final output devices.

1.1.2 Versions of the Navigator RIP
The Navigator RIP is available in different configurations and is able to operate on different computer
platforms. The configuration that is best for you depends very much on your individual needs.
In particular, a version of the Navigator RIP with the Output Controller user interface is available for
computers using Intel or compatible processors and running, Windows Server 2003, Windows Server
2008, Windows Server 2008 (R2), Windows Vista and Windows 7. The Navigator RIP may be used
on both single and multiple processor machines running the Windows Server 2003, Windows Server
2008, Windows Server 2008 (R2),Windows Vista or Windows 7 operating systems.
This manual describes the version of the Navigator RIP for Windows Server 2003, Windows Server
2008, Windows Server 2008 (R2), Windows XP, Windows Vista and Windows 7.
The Navigator RIP is appropriate for a wide range of output devices including high-resolution imagesetters, lower-resolution plain-paper setters, and medium to high-resolution printers and plotters. It
supports the special features of these devices, and maximizes their overall productivity.
If workflow features and client control from Macintosh OSX or Windows Server 2003, Vista, Server
2008, and 7 are desired please look at the Navigator Server product.

1.2 Why use the Navigator RIP?
The Navigator RIP has proven itself to be a fast, versatile, and powerful interpreter and renderer for
multiple page description languages. There are many reasons for choosing it above other similar interpreters, the most important of which are discussed here.
The Navigator RIP is effective, compatible, and robust; and shows real benefits in everyday use.




The Navigator RIP is effective because it processes jobs quickly, is able to process jobs of virtually any size, and can re-output selected pages or a complete job without re-interpretation.
The Navigator RIP is compatible because it is kept up to date with the PostScript language,
PDF, XPS, and font specifications; image file formats; and relevant standards from independent bodies.
Note: The Navigator RIP is able to use proprietary extensions internally for quality of output,
speed, and efficiency without losing compatibility.







8

The Navigator RIP is also compatible because it supports several networking protocols for use
in many kinds of networks, whether or not all the computers are of the same type.
Robustness comes from experience with many real jobs. You can configure the Navigator RIP
to override poor settings in incoming jobs (and avoid office printer quality screening on expensive media); use its ability to detect poorly labeled color separations, and so on.
The Navigator RIP is flexible enough to support many workflows, including: composite or preseparated color; the PostScript language, PDF, XPS or TIFF/IT-P1. Some of these input formats require the Navigator RIP options.

User Manual

Navigator RIP version 9

1.3

The Navigator RIP in depth

A system using the Navigator RIP is easy to extend and to upgrade when necessary because the Navigator RIP is a software-based RIP.












You can add options, such as advanced screening, color management, and trapping. In many
cases you can do this by entering passwords and in other cases with software-only procedures.
You can add more output options with software plugins to support imagesetters, platesetters,
proofing and display printers, and workflow integration.
A PostScript language programmer can add simple fragments of PostScript language code to
provide features such as marking pages with draft or similar overprint and color bars.
It is possible to upgrade hardware and software independently. The Navigator RIP is very similar on all platforms so there is little or no need for retraining if you need to add another type of
computer.
When you upgrade the Navigator RIP you can transfer your existing settings to the new version
of the RIP and most optional output plugins.
The Navigator RIP supports simple imposition of books, page padding, and creep.

The Navigator RIP in depth on page 9 discusses many of these features in more depth.

1.3 The Navigator RIP in depth
Why use the Navigator RIP? on page 8 described some of the advantages of using the Navigator RIP.
This section describes the features that contribute to those advantages.


Characteristics of a software RIP. See page 10.



File format and version support. See page 10.



Extended color capabilities. See page 12.



Screening options. See page 16.



ColorPro. See page 17.



Graphics formats. See page 18.



Input and output methods. See page 18.



Complex jobs. See page 20.



Throughput control. See page 20.



Previewing. See page 21.



Page buffer compression. See page 21.



Fonts and font handling, including composite fonts and font emulation. See page 21.



Convenience features. See page 22.



TrapPro. See page 40.



Simple Imposition. See page 259.

Navigator RIP version 9

User Manual

9

Introduction to the Navigator RIP

1.3.1 Software RIPs compared to embedded RIPs
Many interpreters and renderers for page description languages are based on hardware rather than
software. That is, most printers come supplied with a RIP that runs on its own special hardware.
Sometimes a RIP may run on only one type of printer.
The Navigator RIP contains a software RIP, carefully written to support a number of computing platforms and output systems.
There are a number of advantages to using a software RIP:








If you have a hardware RIP and wish to take advantage of new hardware, you must either pay
for an upgrade of the old hardware or stop using it. With a software RIP such as the Navigator
RIP, you can use your old hardware for other purposes you still have a usable computer. Thus,
taking advantage of new technology in the hardware industry is much more cost effective if
you have a software RIP.
You can easily take advantage of new features if you have a software RIP. If new features are
added to a hardware RIP, the only way to take advantage of those features is to buy the new
version of the hardware, or to have a firmware upgrade. Both of these options incur considerable time and expense. Doing the same thing for a software RIP is much simpler and cheaper‚
improved versions of the Navigator RIP can be run on the same hardware as older versions,
and can be sent to you on disk.
When you buy a hardware RIP, you buy a dedicated machine which is specialized for performing one task: interpreting the page description language. With a software RIP, the non-dedicated hardware you buy is a computer, which can be used for many purposes other than
running the Navigator RIP.
It is much more expensive to customize a hardware RIP to individual requirements than it is to
customize a software RIP.

1.3.2 File format and version support
The Navigator RIP supports several file formats and maintains this support across the widely-used
versions of these formats, as well as the latest versions.
The input file formats that the Navigator RIP supports are:


PostScript LanguageLevel 3, Level 2, and Level 1.



PDF versions up to and including PDF 1.7 files.



XPS version 1.0 files.



10

PDF/X-1a:2001, PDF/X-1a:2003, PDF/X-3:2002, PDF/X-3:2003, PDF/X-4, PDF/X-4p,
PDF/X-5g, PDF/X-5gp.



JPEG and JFIF.



TIFF 6.0 and optionally TIFF/IT-P1.



GIF.

User Manual

Navigator RIP version 9

1.3

The Navigator RIP in depth

See Page Setup Options on page 135 and Chapter 8, Configuring Input for more details.
The reason for supporting older versions of files and applications is that almost all page descriptions
are created automatically by applications. Those applications can only use the features of the page
description language as they existed at the time of writing the application, and those features are subject to change.
For example, the Navigator RIP is a PostScript LanguageLevel 3-compatible RIP management system but still supports features of PostScript Level 2 and earlier. The RIP also recognizes uses of PostScript language code specific to common image creation and page layout applications.
¬Æ

The PostScript language was first created and used in the mid-1980s and since that time it has undergone many improvements and changes. Throughout this period, people have been trying to create
PostScript language page descriptions that, above all, work despite any bugs in the interpreters which
may have existed at the time.
To cope with this situation, the Navigator RIP is compatible not only with the PostScript language
jobs of today, but with the jobs of yesterday. There are two aspects to dealing with older jobs: dealing
efficiently with features that are now better supported by more modern versions of the page description language; dealing with work-around methods for bugs in older versions of the page description
language. The Navigator RIP does both.
It might not be immediately obvious why it is necessary to deal with bugs and work-around methods,
but consider this example.
What happens if a bug is fixed in a widely-used PDL interpreter and renderer? Newer RIPs and applications no longer have to cope with that bug, but problems arise if you wish to interpret old page
descriptions (generated with an application written before the bug was fixed) with your new RIP. The
old page descriptions take the bug into account, but the new RIP does not, so the hard copy produced
with your new RIP is wrong. If your RIP cannot accommodate this, as the Navigator RIP can, your old
files (and indeed your application if you still use it) are useless.

1.3.2.1 Additional information
The Navigator RIP can also enable substitution of high resolution images for PDF and PostScript language jobs, using an in-RIP implementation of the Open Prepress Interface (OPI), versions 1.3 and
2.0, and Desktop Color Separation (DCS), versions 1.0 and 2.0. See Features on page 133 for details.
The Navigator RIP can be configured to support special features color management, font substitution,
duotones, and vignettes of jobs produced by several image creation and page layout applications.
These applications include:


Adobe Photoshop



Adobe Illustrator



QuarkXPress

¬

¬

¬

See Page Setup Option Extras on page 140 for more details.

Navigator RIP version 9

User Manual

11

Introduction to the Navigator RIP

1.3.3 Extended color capabilities
The Navigator RIP supports the use of color capabilities introduced with PostScript LanguageLevel 3.
This support includes use of N-color or HiFi color systems using varying number of colorants,
whether those colorants mimic CMYK systems (photo-ink systems) or use obviously different colorants.
The RIP provides separations management, preview, screening, calibration, and plugin support for the
popular N-color systems.
The RIP also has the ability to calibrate and screen spot colors separately from process colors. This
feature greatly simplifies the management of spot colors in the RIP.

1.3.3.1 /DeviceN and N-color
The /DeviceN color space allows better control of PostScript language code in environments where the
number of separations is no longer dominated by the CMYK, RGB, and monochrome color models. N
represents the number of process color separations. Using the /DeviceN color space, CMYK corresponds to N=4, RGB to N=3, and monochrome to N=1. This color space allows the Navigator RIP to
access separations where N=2 (duotones) or greater than 4 (N-color).
The /DeviceN color space provides the functionality to support HiFi color or N-color systems where
colorants in addition to CMYK enhance the attainable gamut of an output process. It also provides
solutions for minimizing the number of spot colors required by an output device.
The Navigator RIP uses this color space to extend separations management, Roam, and plugin capabilities. Depending on your specific device and workflow, additional plugin development may be
required to make use of the expanded number of color channels.

1.3.3.2 Duotones, tritones, and quadtones
Some applications (for example, Photoshop versions 2.5 and later) convert duotones involving spot
colors to CMYK colors when producing composite PostScript language jobs. While the composite
output is correct, when such jobs are submitted to a RIP that uses in-RIP separation, the duotones are
drawn on the process color separations and not on spot color separations as expected.
Photoshop has the ability to produce spot color separations when in-RIP separation is selected for a
LanguageLevel 3 RIP. This eliminates the problem just described for output generated by
Photoshop 5.0 when sent to any LanguageLevel 3 RIP.
In addition to producing correct output from Photoshop 5.0 jobs, the Navigator RIP correctly handles
jobs from Photoshop versions 2.5 through 4 as well. The Navigator RIP detects this construct in Photoshop jobs and correctly diverts the duotone to spot color separations. Note that you must configure
the Navigator RIP to generate these spot color separations for this to work.
For more information see Adobe Photoshop features on page 140.

1.3.3.3 Patterns and Smooth Shades
LanguageLevel 3 implements features that improve the quality of PostScript language fills. In addition, it allows shades to be output smoothly at the resolution of the output device target. The RIP

12

User Manual

Navigator RIP version 9

1.3

The Navigator RIP in depth

extends this capability by allowing for vignette replacement, in which existing vignettes in PostScript
language and PDF jobs are replaced.
This functionality greatly improves the quality of gradients and shades on output.

1.3.3.4 Images
The Navigator RIP supports type 3 and 4 image dictionaries (for uses such as masks). This allows an
application to produce masks using multiple images in a more efficient fashion. This mask technique
also improves performance by eliminating the need for a detailed PostScript language clipping path.
This feature is best suited to lower-resolution output devices and workflows.

1.3.3.5 settrapparams
LanguageLevel 3 includes a software interface that allows the description of trap settings within a
PostScript language file.
The Navigator RIP incorporates the settrapprams interface and uses this for setting trapping parameters. The developers have extended settrapparams to include those trapping parameters that are not covered by the 3010 specification.

1.3.3.6 Type16 halftones
The Navigator RIP supports type 16 halftones, which can contain more than 256 shades of gray. Navigator has always supported an arbitrary number of gray levels, even in the PostScript language
Level 1 compatible RIPs. In the Navigator RIP, this support for more shades of gray is also accessible
using the LanguageLevel 3 constructs.

1.3.3.7 Idiom recognition
The Navigator RIP uses idiom recognition to detect PostScript language procedures and replace procedures that are bound when defined. This extends to procedures some of the benefits that Navigator’s
shadowop operator provides for operator redefinition. Once the PostScript language code is intercepted, the Navigator RIP replaces it with optimized code.
This operator has many potential uses that include detecting level 2 code in a PostScript language file
and replacing it with LanguageLevel 3 code.

1.3.3.8 Type 32 fonts
The RIP recognizes and supports Type 32 fonts.

1.3.3.9 Other operators
The RIP supports the LanguageLevel 3 operators that are defined in the 3010 LanguageLevel 3 specification. The Navigator RIP accepts PostScript language output from applications using these
LanguageLevel 3 operators.

Navigator RIP version 9

User Manual

13

Introduction to the Navigator RIP

1.3.3.10 File filters
The Navigator RIP supports the required file filter additions documented in the 3010
LanguageLevel 3 specification.

1.3.4 Color, screening, and Roam functionality
The RIP contains several capabilities relating to color, screening, and roam. Where appropriate, Navigator enables the end-user to control the underlying functionality from the user interface.
Not all of the functionality is applicable to all output devices or workflows. You will find some features more relevant than others for particular output devices and workflow instances.

1.3.4.1 Color API
The Navigator RIP contains a programming interface (API) that allows you to set the options for the
color management modules from PostScript language code. This provides control over all color
options, including the installation of ICC profiles, without a user interface.

1.3.4.2 Spot color screening and calibration
The Navigator RIP has the capability to calibrate and screen spot colors as well as process colors. This
feature greatly simplifies the management of spot colors in the Navigator RIP.

1.3.4.3 UseCIEColor
This operator improves color control in the PostScript language code by allowing device-dependent
input data to be translated to a device-independent CIE color space. The input colors are mapped to
the device-independent color space using an input profile. The colors may then be transformed ready
for printing on another output device.
Navigator has provided this functionality for some time through the color management modules the
latest being ColorPro. You can choose to use the color management specified in the job by UseCIEColor, or to override this and instead use the more detailed controls provided with ColorPro.

1.3.4.4 Embedded ICC profiles
When ColorPro is enabled, the Navigator RIP can detect and use ICC profiles embedded in Photoshop
EPS, TIFF, JPEG or HD Photo images. See the ColorPro User Guide for details.

1.3.4.5 Colorimetric roam
Provided a system is using an sRGB display (monitor and display card) and the monitor is properly
calibrated, Roam approximates colorimetric output on the display.

14

User Manual

Navigator RIP version 9

1.3

The Navigator RIP in depth

1.3.5 Memory management
There is a continuous program for improving the performance of the Navigator RIP memory management. This not only provides the groundwork for future memory features and enhancements, but also
allows for a level of dynamic memory management within the Navigator RIP.
There are GUI controls for setting memory. As in the past, it is possible to specify the memory used by
the Navigator RIP, but there is a significant difference.


With this implementation, the specified memory is not held exclusively for the Navigator RIP.
Instead, the Navigator RIP takes only the amount of memory it requires at the time. This
amount rises while processing a job but once the job is processed the memory is returned to the
system. This allows the Navigator RIP to co-exist better on a system with the operating system
and other applications.

The implementation also makes it possible to specify a reserve amount of memory, available for shortterm use by the Navigator RIP. For example, the Navigator RIP may use this reserve in time-critical
operations, where the alternative would be to use disk storage, as long as the reserve is large enough to
keep the operation in memory.

1.3.5.1 Garbage collection
Garbage collection is performed when memory is low and reclaims the memory occupied by composite objects that are no longer accessible to the PostScript language program.
This helps some jobs that allocate a lot of memory, but not all. Some jobs that could not partial paint
will now need significantly less memory than before.
When garbage collection starts, a message is displayed on the console window.
Garbage collection is controlled using the PostScript Language operator vmreclaim.
For more information on garbage collection, see section 3.7.4 of the The PostScript Language Reference (3rd Edition).

1.3.6 FlatOut
The Navigator RIP releases are capable of stitching single-page PGB (Page Buffer) files into a predefined flat. This feature enables the development of page-based workflows around the Navigator
RIP.
Three components are required to produce a stitched flat:
1. A background PGB (Page Buffer) file. You can create a background in a page layout application
and then convert the PostScript language code to a PGB using the Navigator RIP. This flat background contains a slot for each page. This background may contain sluglines, crop marks, and
so on.
2. Single-page PGB file(s). For example, to produce an eight-page flat, eight single-page PGB
files must be generated.
3. A flat description file. This file describes the location of the background and single-page PGB
files on disk. The flat description file also indicates the positioning of pages on the flat.

Navigator RIP version 9

User Manual

15

Introduction to the Navigator RIP

The flat description file is presented as an input to the Navigator RIP and the PGB files are stitched
into a single flat for output to the specified output device.
For additional information on how to generate a flat description and more on PGB stitching, please
refer to the FlatOut User Guide.

1.3.7 Screening options
The Navigator RIP has several screening features and options, designed to produce high quality output
on devices ranging from imagesetters to inkjet proofing printers. There is generalized screening support for color systems that go beyond straightforward CMYK process colors, but you need an output
plugin and device able to support these color systems.
The Navigator RIP is able to create extra gray levels (with HPS) and to control the number of extra
levels, even with PostScript language Level 1 jobs. This feature helps to eliminate stepping in
vignettes and to avoid posterization, while enabling you to set a limit on the number of levels that is
appropriate to the required image quality. The RIP also supports more than 256 shades of gray when
they are specified using PostScript LanguageLevel 3 constructs.

1.3.7.1 Harlequin Precision Screening
For very high quality output, Harlequin Precision Screening (HPS) has been produced. This is a proprietary feature that eliminates objectionable moirÐ© patterning when producing color separations.
Once correctly set up, and with sufficient memory available, the Navigator RIP can produce output
with HPS at speeds comparable to those obtained when using traditional lower-quality rational tangent
screening.
HPS has been designed for automatic operation, without the need to refer to complex tables of magic
numbers, and you can choose to override any bad settings in the job. This is especially useful for print
bureaus, who often receive PostScript language code that is not set up for high quality screening.
Some RIPs have restricted dongles that do not allow HPS. In such cases, HPS can be activated with a
password in the Configure RIP Extras dialog box.

1.3.7.2 Navigator Screening Library
Global Graphics has developed a number of special screening strategies for very high quality press
work, particularly when printing in color. They are included in the RIP’s Screening Library and
require separate passwords to become enabled.
The screening library includes Harlequin Dispersed Screening (HDS), Global Graphic’s patented Frequency Modulation (FM) screening technology. Moire patterning is impossible with HDS, and it gives
finer detail for a given device resolution. Also included are Harlequin Chain Screening (HCS), which
is particularly good at creating smooth flat tints and at holding detail in continuous tone regions, and
Harlequin Micro Screening (HMS) which allows a greater range of tones to be used even at high
screen rulings.

16

User Manual

Navigator RIP version 9

1.3

The Navigator RIP in depth

1.3.7.3 Screening for extended color systems
Several color systems require more than the four screens used for CMYK work. The Navigator RIP
contains screens suitable for use with HiFi color systems such as the PANTONE Hexachrome Color
Selector system or the various photo-ink technologies using different densities (light and dark versions) of one or more colorants.
¬Æ

1.3.8 ColorPro
It is possible to add and use the advanced color management facilities provided by ColorPro which as
an optional extra provided with the Navigator RIP and requires a password for it to be enabled
ColorPro together with SetGoldPro profile making software is Global Graphics color science solution
for ensuring color quality and accuracy for proofing and emulation. ColorPro provides the largest realizable color gamuts for the final print market and allows greater accuracy than would be possible
using standard profiles.
ColorPro embraces open systems, industry standards and device-independent color science, and is
able to make full use of them. If you have ICC profiles with which you already achieve good results
you can use these profiles with ColorPro. You should however be aware that ColorPro contains color
science that is optimized for the Navigator RIP and is easily utilized with the introduction of SetGoldPro.
ColorPro allows you to specify different gamut-mapping algorithms in the reproduction of a page. For
example, you can simultaneously specify Absolute colorimetric to reproduce some elements of the
page and yet specify Perceptual to reproduce the photographs. The end result is that, on a single page,
the color for photographs are each calculated without affecting other elements on the page.
ColorPro allows processing of colors in page data using ICC profiles produced by OEMs, third
parties, or end-users using third party characterization and profiling tools. ICC profiles specify a translation between two color spaces. Each profile is prepared for a specific set of imaging conditions. One
device may have more than one profile. The profiles may correspond to running the device with
different combinations of resolutions, inks, and paper.
New profiles can be easily added to ColorPro, and previously installed profiles can be selected
without the need to reinstall each time a profile is used.
An option to uninstall ICC profiles is also provided.
In addition, ColorPro allows the use of profiles prepared in the Navigator RIP format. Global Graphics supplies a number of profiles for commonly used systems.
When ColorPro is enabled, the Navigator RIP can detect and use any ICC profiles that Photoshop has
embedded in EPS, TIFF, JPEG or HD Photo images.
This manual describes the Navigator RIP without ColorPro, but mentions areas where ColorPro would
modify your use of the Navigator RIP. The extra facilities are described in the separate manual ColorPro User Guide.
For information on color facilities provided in the Navigator RIP as standard see Color Setup on page
354.

Navigator RIP version 9

User Manual

17

Introduction to the Navigator RIP

1.3.9 Graphics formats
The Navigator RIP can produce halftone output, 8-bit grayscale output, 8- and 10-bit run-length
encoded (RLE) output, and color contone (continuous tone) output in N-color, CMYK and RGB formats. This allows the RIP to be used for driving contone color printers as well as imagesetters.
This output is passed to an output plugin (described in Input and output methods on page 18), and
from there to the output device controlled by that plugin. Output devices are often physical printers
producing images on paper or film; but devices can also be files on disk, storing the images in a specific graphics format.
An output plugin that creates disk files provides a simple method of translating from the input format
to another graphics format. Using such an output plugin extends your ability to transfer graphics
defined in the PostScript language or PDF to other software applications or systems. For example, you
can produce a graphics image without dependencies on external fonts or color management. Also, you
may wish to send a page description to someone who does not have access to PostScript language
tools but who can use files in the Tagged Image File Format (TIFF). TIFF is a commonly-used graphics format and a TIFF output device is supplied with the RIP.

1.3.10 Input and output methods
The Navigator RIP performs most of its input and output using plugins, small auxiliary programs that
the RIP loads when it starts up.
You can install new plugins into an existing installation of the Navigator RIP to add new input and
output capabilities. Several optional plugins are supplied with an installer program, and it is always
better to use an installer if it exists, but the basic operation is file copying.

1.3.10.1 Output plugins
The RIP sends all output to printers and other output devices through output plugins, thereby allowing
the quick and straightforward addition of support for new output devices.
Typical output plugins support single output devices or families of similar devices and may be supplied with special screens, calibration and color management, and other features appropriate to the
device, such as control of exposure or cutting media.
Optional output plugins support file formats useful in workflow systems, advertising distribution, and
setting up printing presses. These formats include TIFF/IT-P1 and the CIP3 Print Production Format
(PPF).

1.3.10.2 Input plugins
Input plugins provide communication between the Navigator RIP and other systems, primarily as
sources of input.

18

User Manual

Navigator RIP version 9

1.3

The Navigator RIP in depth

The standard input plugins provided with the Navigator RIP include:


AppleTalk (Legacy)
An AppleTalk network connects together a mixture of Apple and other computers and printers
in order to share disk resources and printing services. AppleTalk runs on LocalTalk and Ethernet
and is a widely supported network protocol.
AppleTalk networks often include multiple printers, and are available to Mac OS X users
through the Print Center. Because the Navigator RIP behaves as any other printer on AppleTalk,
you can send print jobs to the RIP running on a machine connected to the AppleTalk network, in
the same way as any other printer. (The Navigator RIP can emulate several, differently configured, printers if you wish.)
Note: The AppleTalk plugin is not installed on Windows Vista or Windows 7 where this protocol is not supported.



Spool Folder
This plugin allows you to set up the Navigator RIP so that it continually scans or polls a folder
on a central server for input files. When these files appear and are complete, the RIP processes
them. The spool folder uses the network file access provided by your machine, for example,
Network File System (NFS) on machines running the UNIX operating system. You can use
multiple configurations (as described in Multiple inputs on page 19), allowing you to have several scanned folders, each with a different associated Page Setup.See the Spool Folder Input
Plugin manual for further information.



NT Pipe
This provides a named pipe allowing high speed communication with an application such as an
Open Prepress Interface (OPI) server.



Serial Port
With this plugin, PCs and other computers can be connected using their serial ports and communicate with one another. The data transfer speed, however, is very slow. This plugin supports the
Adobe Serial Lines Protocol.



Sockets
With this plugin, the Navigator RIP can accept input from a network socket client program,
which may be part of a larger workflow system. This plugin supports TCP/IP and UNIX socket
protocols.

1.3.10.3 Multiple inputs
For some input types, it is possible to have available several configurations or Page Setups (where
parameters such as resolution, output device, rotation, and negation are given specific values). Using
AppleTalk, several different virtual printers can be made available on the network using a single running copy of the Navigator RIP, each printer with a different Page Setup. When using the Spool folder
plugin, several spool folders can be made available, each with an associated Page Setup.
You can enable multiple types of input allowing, for example, AppleTalk and Spool folder inputs to
operate at the same time.

Navigator RIP version 9

User Manual

19

Introduction to the Navigator RIP

1.3.11 Complex jobs
Given enough memory and disk space, the Navigator RIP can interpret arbitrarily complex jobs. The
same is not true for many other high resolution RIPs.
This is achieved with a feature called partial page buffering (or painting partial pages in some messages). Essentially, if a particular job is so large that it cannot all be fitted into memory at once, the
RIP interprets only as much of the page description as does fit into memory, and places the interpreted
image in a partial page buffer. Having dealt with part of the image, the RIP gains enough free memory
to deal with the next part the effect being that the page description is divided into manageable sections, which are interpreted one at a time. Disk space is used to hold what has been interpreted so far
until the whole image has been processed, and printing can commence.

1.3.12 Throughput control
In almost all circumstances, it is desirable to produce page images as quickly as possible while maintaining high quality. All Navigator RIPs are written with this aim in mind and can benefit from operating with fast hardware. Beyond this, and especially when using high resolution imagesetters, special
techniques can help maximize the rate of producing useful output. The Navigator RIP can use these
techniques, collectively called throughput control, when either of the multiple page buffering modes is
selected. See Page buffering modes on page 57 for more details of multiple and single page buffering
modes.
The Navigator RIP increases job throughput in two ways.
Firstly, the RIP differs from other RIPs in the way bitmaps are produced and sent to an output device.
A traditional RIP must interpret a page and send the bitmap directly to the output device before continuing with the next page. Because of this, if you have to change cassettes or some fault occurs with
the output device, the current page cannot be output until the fault is cleared; productive work stops
until the situation is resolved.
The Navigator RIP can be operated in this way if desired, but it offers a powerful alternative that overcomes these limitations by saving bitmaps on disk in the form of page buffers, before bitmaps go from
the disk to the output device. Many page buffers can be stored on disk (as many as will fit into the
available disk space), and the RIP can continue to produce and save page buffers, even if the device is
not ready to output. If a printer jam occurs in an overnight job, the RIP is still able to process the job
and the page buffers are ready for output the next day. In a high volume environment, this ability can
be invaluable.
Even when there are no problems with the output device, you can still save time if you need to produce more than one copy, you do not need to reinterpret the page description, because the bitmaps are
still retained on disk. This means, for example, that if a page gets damaged in the developer or there is
a problem with ink delivery then it is easy to print another copy.
Secondly, the Navigator RIP increases job throughput by allowing job interpretation and output to
occur simultaneously. While some pages of a job are being interpreted, other pages, which have
already been interpreted, can be sent to the output device. This can greatly increase throughput when
outputting several pages in succession. With a fast computer, it is possible to drive the imagesetter
continuously for several pages. Even with fast output devices, time can be used effectively, because
the RIP can be interpreting data while the output device starts up.

20

User Manual

Navigator RIP version 9

1.3

The Navigator RIP in depth

1.3.13 Previewing
The Navigator RIP allows you to preview pages, at their output resolution on screen to check them for
mistakes before they are output, at their full output resolution. You can preview halftone, contone and
grayscale images using the full color capabilities of the display system.
You can request a reduced view of the entire page in a separate window. This provides a better idea of
what the whole page looks like, and also acts as a navigation aid to help you to display any part of the
page at full resolution, to check fine detail.
The remaining functionality depends on the page buffering mode. (See Page buffering modes on page
57 for more information.)
Using either of the multiple page buffer modes, you can view several separations or pages, overlaid or
separately. This allows a good check of the page, including checking image positioning, trapping, and
so on. You can view separations in their natural colors, thus obtaining a realistic impression of final
output, or in false colors, to highlight differences between similar separations or composite pages.
In either of the single page buffer modes, you can view only individual separations or a composite
image, and only in the natural colors.

1.3.14 Page buffer compression
When producing jobs at high resolutions or on large format devices, large amounts of disk space are
often required if page buffers are used. The RIP makes the most of the available disk space by compressing page buffers as they are created and placed on disk, and then uncompressing them as they are
read from disk and printed or displayed.
Compression saves a great deal of disk space and often means that large jobs can be printed without
stopping the imagesetter, because compressed data can be read from disk more quickly. Stopping an
imagesetter part way through a job can lead to a loss in output quality, so this facility can be of great
benefit. (See the description of data underrun on page 71, which explains one problem that page
buffer compression can help avoid.)
Page buffer compression always produces buffers of the same size as or smaller than the original. For
color pages, it typically achieves a compression ratio of 3:1, and for newspaper pages a typical ratio of
10:1. That is, the compressed page buffer could be less than a third of the size of an uncompressed one
for color pages, and a tenth of the size for newspaper pages. For color images, this can mean reducing
disk requirements from 150 MB to only 50 MB.
Page buffer compression in the RIP is a completely lossless procedure. The quality of your output is
fully preserved when compressing and then uncompressing the page buffers. For details of the amount
of disk space you need to reserve for page buffers, see Ability to RIP a job on page 27.
Files greater than 2 GB can be read and written. The most likely use of this is the ability to generate
page buffers greater than 2 GB.

1.3.15 Fonts and font handling
To print text, the relevant fonts must be installed in a RIP before interpreting a job, or the fonts must
be supplied with that job.

Navigator RIP version 9

User Manual

21

Introduction to the Navigator RIP

If the interpreter sees that a Times-Roman font is needed for a particular job, it must know what a
Times-Roman font is. The Navigator RIP comes ready-supplied with the 35 standard fonts found on
most PostScript language printers and several additional fonts. (For more information see Supplied
fonts on page 287.) Thousands of other fonts are commercially available, as is software to help you
design your own fonts from scratch. The RIP can load any PostScript language font into the RIP for
use in interpretation (unless the font is encrypted using some proprietary encryption mechanism).
The Navigator RIP enables you to download, list, and proof fonts easily and quickly. You have complete control over which fonts are loaded when the RIP is run, and can remove any unwanted fonts at
any time.
The Navigator RIP can convert any Type 1 PostScript language font into its own format, DLD1.
DLD1 fonts consume much less memory and disk space than normal Type 1 descriptions, and so
reduce processing time but with no change in output quality.
The 35 standard hinted fonts are provided with the Navigator RIP in DLD1 format. Font hinting is
essential when previewing images or printing at low resolution, where it greatly improves the quality
of the output.

1.3.15.1 Composite fonts
The Navigator RIP supports composite fonts, in both Original Composite Format (OCF) and Character Identifier (CID) formats, which allow you to use large or complex fonts such as those for Chinese,
Japanese, or Korean characters. Composite fonts support large character sets and are especially important in the Far East.
There are several features to allow easy composite font installation without requiring complex structuring of the fonts. Also, because of the high value of such complex fonts, the Navigator RIP provides
a way of encrypting fonts, so that they can only be used with a particular copy of the RIP.

1.3.16 Convenience features
The Navigator RIP provides some useful facilities for monitoring media on cassette-loaded devices
such as imagesetters and for using or testing fragments of PostScript language code. These fragments,
page features, can do such things as labelling output.
Most of these facilities require little or no knowledge of the PostScript language.

1.3.16.1 Media management
Output devices vary greatly in the type of output media they can use and the amount of manual intervention required. Some devices use a single source of roll-fed or sheet-fed material and the output is
ready to use, while other devices can accept media from a variety of sources or require processing of
the output. Equally, different users make very different demands on their imagesetters with respect to
film and paper handling.
The Navigator RIP includes a sophisticated media manager.
For example, you can keep track of the media left on the rolls of up to sixteen input cassettes; a variety
of materials and media widths can be set, and the system allows you specify automatic media cutting

22

User Manual

Navigator RIP version 9

1.3

The Navigator RIP in depth

at predetermined places, such as after a particular number of pages or before the take-up cassette gets
too full.
In addition, the Navigator RIP warns you when a cassette is nearly empty, and allows you to define
how much space should be left between pages, between jobs, and between film cuts. It will even save
media by automatically rotating pages to use the minimum amount of film.

1.3.16.2 Page features
Sometimes you may want to apply a special effect to your jobs. For example, you may want to have
the word Draft overprinted on every page. Because these can be one-off needs you may want to produce a special copy of a document while it is at draft stage it is preferable not to alter the job if at all
possible.
The Navigator RIP provides this facility by allowing you to specify a fragment of PostScript language
code, independent of your main job, to be processed in conjunction with it. A fragment such as this is
known as a page feature.
A page feature carries out some process on your job, leaving the original untouched. Often, the effect
of the process is to produce a desired printed effects but some page features produce no printed output
because their purpose is to report some properties of the job.
A number of page features are provided with the Navigator RIP for immediate use or as examples.
You can choose any of those for immediate use from a menu in a dialog box. See Features on page 133
for details.
As with plugins, you can add new page features by placing them in a particular folder.

1.3.16.3 Interactive sessions
The Navigator RIP has a feature known as the executive, which allows you to run an interactive PostScript language session. This means that you can type fragments of PostScript language code and have
them interpreted immediately. This can be very useful when debugging and testing small parts of jobs.
The executive feature is available in the Navigator RIP on all supported platforms.

1.3.16.4 Page imposition
Page imposition is the process of laying out several pages of a document on one large sheet of paper or
film. Using a combination of PostScript language operators and an extension to the language, it is possible to take several pages and produce output on a large sheet of paper, each page being printed in an
orientation and position determined by you.
Page imposition can be useful both for saving media pages can be orientated so as to use the optimum
amount of paper and for printing pre-imposed sheets of paper, for instance when printing a book
where certain pages are made out of the same piece of paper. Some understanding of the PostScript
language is useful here, but the Navigator RIP is supplied with several imposition templates which can
be used immediately.

Navigator RIP version 9

User Manual

23

Introduction to the Navigator RIP

24

User Manual

Navigator RIP version 9

2
Running the Navigator RIP
This chapter is a short guide to getting the Navigator RIP running on your machine. It does not contain
complete installation details because these differ between different combinations of computer, operating system, and output device.
This chapter provides details for the following:










Machine requirements, described in Machine requirements on page 25.
Connecting your machine to an output device, described in Installing printer interface cards on
page 29.
The files and folders used by the RIP, described in Navigator RIP folder structure on page 29.
Starting up the Navigator RIP and an introduction to the standard menus and dialog boxes,
described in Starting up the Navigator RIP on page 33.
Some menus that appear only when options are enabled, described in Menus affected by
optional features on page 39.
Stopping the Navigator RIP, described in Stopping the Navigator RIP on page 41.

2.1 Machine requirements
This section covers the hardware requirements that you need to run the Navigator RIP. Do not worry if
you are not familiar with the RIP technical terms used in this section. As you work through the manual, all of these terms will be explained. The Glossary on page 397 explains many of these terms.
Hint: Follow the basics of this section on first reading to get a working installation of the RIP. When
you are more familiar with the RIP, use this section for reference, so that you can improve the RIPs
performance in your environment.

2.1.1 Performance
For a given processor type and speed, the most important things affecting the performance of the Navigator RIP are the built-in or physical memory (RAM) and the speed and size of disks.
It is recommended that you use a 450 MHZ or faster Pentium based PC running Windows Server
2003, Windows Server 2008, Windows Server 2008 (R2), Windows XP, Windows Vista, or Windows

Navigator RIP version 9

User Manual

25

Running the Navigator RIP

7 with 256 MB or more of random access memory (RAM) for the RIP and a minimum of 4 GB of free
disk space.
Note: Please check the Install guide for the latest specification information.
In addition the following points should be considered:





There must be sufficient space to hold page buffers on disk.
There must be sufficient virtual memory available for the job. This is especially important
when using composite fonts.
For some output devices, a disk with a certain minimum performance may be required.

Important: The general rule is that the more memory, the better the performance. Note especially that
if you use the following features, we recommend that you add extra RAM:


Add an additional 8 MB RAM for each composite PostScript language font used in a single
job.



Add an additional 12 MB RAM for when using Harlequin Precision Screening (HPS).



Add an additional 256 MB RAM when using TrapPro.



Add an additional 32 MB RAM for EDS Screening in the output plugin.







When using ColorPro, add extra RAM. The required amount can vary according to the functions you use.
There are some instances when the RIP cannot paint partial page buffers to disk: for example,
when recombining preseparated jobs or using TrapPro. In such cases, the RIP will need extra
memory and must have enough memory to complete the job. See Navigator RIP memory allocation on page 186, the TrapPro User Manual for further details.
For large format devices, more memory may be required.

In general, if a job uses more than one of these features, add together the extra memory required by
each feature. For example, if a job uses composite fonts and you are using HPS add together the extra
amounts of RAM. You will also need enough extra RAM to accommodate any printer and network
buffers you want to set up.
For more details, see Chapter 6, Screening, Chapter 7, Configuring the RIP, and Chapter 11, Fonts.
Note: This manual uses conventions of font and style to describe special key combinations and to
highlight the titles of programs, options in menus and dialog boxes, and text that we suggest you type.
For details, see the Conventions on page 4 in the Preface.
Windows Server 2003, Windows Server 2008, Windows Server 2008 (R2), Windows XP, Windows
Vista and Windows 7 use disk space as virtual memory.
For Windows Server 2003, Windows Server 2008, Windows Server 2008 (R2), Windows XP, Windows Vista and Windows 7, the defaults suggested when you install Windows are satisfactory for use
with the Navigator RIP. If you later install more disk space or memory, you should update the virtual
memory setting. To do this, open the System control panel and display the Performance tab. In the
Virtual Memory section, click the Change button and use the recommended figures.

26

User Manual

Navigator RIP version 9

2.1

Machine requirements

In summary, as well as the memory and disk allocations discussed here, the performance of the RIP
also depends on the following:






The speed of the processor.
The amount of additional RAM on your machine. (Additional RAM is RAM above the basic
requirement.)
The disk speed of your machine.
The interface used to send data to the output device, especially if it is a high-performance
device.

Performance issues are described throughout this manual, but see especially Chapter 7, Configuring
the RIP, and Appendix A, Troubleshooting, for details about optimizing the performance of your
hardware.
For further details on machine specifications you should consult the relevant installation guide.

2.1.2 Ability to RIP a job
Depending on what page buffer mode you choose, the Navigator RIP will usually create one or more
page buffers on disk when you process any job (see Chapter 4, Navigator RIP Output Methods, for
full details). This allows the RIP to print any job on a machine of any performance, no matter how
complex the job is. The only requirement for your machine (apart from a minimum requirement of
RAM) is that it must have sufficient free disk space to hold these page buffers.
By default, the Navigator RIP compresses page buffers as it creates them: the compression is always
lossless and does not affect the output quality in any way. This compression can reduce the disk space
required to anything from half to a tenth of the uncompressed file, or even less. However, you do not
have to compress page buffers if you do not wish to. See Chapter 7, Configuring the RIP, for full
details.
Note: Crop marks can greatly increase the actual size of the page (by adding largely blank surrounds
to the image) and hence create a need for more disk space. If you ask the Navigator RIP to compress
page buffers as they are created, the extra space required by crop marks compresses well, as does the
other blank space between text and images.
Typical free disk requirements, for both compressed (C) and uncompressed (U) page buffers, are
shown in the following table, giving details for output at different resolutions and for different page
sizes. These figures are for halftone page buffers holding a monochrome page or one separation of a
separated page. All figures are given in MB.
US Letter
Resolution

A4

Tabloid

A3

Broadsheet

U

C

U

C

U

C

U

C

U

C

300 dpi

1.00

0.20

1.00

0.20

2.00

0.40

2.10

0.41

4.60

0.93

400 dpi

1.70

0.36

1.80

0.37

3.60

0.71

3.70

0.74

8.20

1.60

600 dpi

4.00

0.80

4.10

0.83

8.00

1.60

8.30

1.70

19.00

3.70

800 dpi

7.10

1.40

7.40

1.50

14.00

2.90

15.00

3.00

33.00

6.60

Table 2.1 Typical free disk requirements for page buffers

Navigator RIP version 9

User Manual

27

Running the Navigator RIP

US Letter
Resolution

A4

Tabloid

U

C

U

C

900 dpi

9.00

1.80

9.30

1.90

18.00

U

1200 dpi

16.00

3.20

17.00

3.40

1524 dpi

26.00

5.20

27.00

5.40

2400 dpi

64.00

12.80

68.00

3048 dpi

104.00

20.80

108.00

A3

C

U

3.60

19.00

32.00

6.40

34.00

52.00

10.40

54.00

13.60

128.00

25.60

136.00

21.60

208.00

41.60

216.00

Broadsheet
C
3.70

U

C

42.00

8.30

7.20

74.00

14.80

10.80

120.00

24.00

27.20

296.00

59.20

43.20

480.00

96.00

Table 2.1 Typical free disk requirements for page buffers (Continued)

Contone page buffers or composite color page buffers are bigger than monochrome page buffers when
uncompressed, by a combined factor taking account of the number of bits used per color and the number of colors in the page buffer. For example, when uncompressed, a four-color page using 8 bits per
color (256 tonal values) would use 32 times more memory than the figures given here. It is harder to
predict the relative sizes of compressed page buffers because the contents of the page have a large
effect. For example, the compression ratio achievable for a page filled with an unchanging background tint is likely to be better for a contone page buffer than for a halftone page buffer.
In addition, you must ensure you have enough disk space to hold workspace for processing the
scanned images on any one page of your job. For example, when printing the Seybold Musicians test
job (a full-color scanned image), 8 MB of extra disk workspace will sometimes be required in addition
to the figures shown above. (Whenever possible, the RIP uses RAM in preference to disk space.)
If you have spare memory after allocating memory for the considerations described in Performance on
page 25 and in the separate Navigator RIP Installation Guide, you may be able to use this surplus to
create a RAM disk in which to place page buffers. To be useful, the RAM disk must be at least large
enough to hold a single page buffer, and if you want to use throughput (using either of the multiple
page buffer modes), it should ideally be large enough to hold at least two page buffers.
For 2540 dpi color work, a RAM disk of around 100 MB is desirable. For 1016 dpi monochrome output, a RAM disk of around 30 MB may be enough.

2.1.3 Driving a printer effectively
The machine requirements discussed so far have concerned the production of a page buffer. Meeting
these requirements is sufficient for you to view the page buffer on screen or for the Navigator RIP to
convert it into a file in a useful graphics format.
When you want to convert the page buffer to an image on physical media, you must transfer the data
to an output device. This transfer is another factor determining overall performance and often imposes
other requirements on the computer system running the RIP.
Many output devices need data to reach them at a sustained high speed; in general, this speed becomes
higher and harder to achieve as the resolution of the device increases. Table 2.2, page 29, shows examples of required data transfer rates (in kilobytes per second) for typical output devices supported by
the various versions of the Navigator RIP.
With simple jobs, these data rates can be achieved without using a page buffer on disk. However, with
complex jobs, a page buffer may be required, which means that the disk on your computer must be

28

User Manual

Navigator RIP version 9

2.2

Rate
(KB/s)

Resolution
(dpi)

Installing printer interface cards

Output device

200

300

Large format inkjet printer

2000

300

Dye-sublimation printer

750

2400

Slow imagesetter

1500

1270

Fast imagesetter

8000

4000

Large format drum recorder

Table 2.2 Required data rates for typical output devices

fast enough to supply data at these rates. If the disk is too slow and your printer is not capable of stop
/ starting without abandoning the page, it is not possible to output the whole page. If your printer can
stop / start in the middle of a page, then achieving the required data rate is less important, but the quality of the output may still be affected, depending on the device.
When you look at the data rates in this table, note the following:




The disk speed of your machine must be slightly faster than the data rate of the output device in
order to drive it successfully the extra speed allows for the overhead of transferring the output
to the printer. For example, a machine with a disk speed of 1.3 MB/s may be required to drive a
slow imagesetter at 750 KB/s.
To smooth out peaks and troughs of disk performance and other system and RIP functions, the
RIP uses a printer buffer in memory. Typically, you should make this buffer large enough to
hold between 5 and 10 seconds of output to the device: for example, 7.5 MB for a device that
outputs at 750 KB/second. You can set the size of the printer buffer in the Configure RIP
dialog box: see Chapter 7, Configuring the RIP.

We strongly recommend that you use compressed page buffers. If this is done, the RIP can achieve
higher data rates because less data has to be read from disk. Compressing page buffers also lets you
run the RIP on a slower disk than would be required were page buffers not compressed. There are very
few situations where it is not desirable to compress page buffers.

2.2 Installing printer interface cards
If you want to produce output on a printer or imagesetter, there must be a suitable way of connecting
the output device to the computer running the Navigator RIP. Many low or medium resolution devices
can connect to standard communications ports or printer ports on your computer. Using a high resolution or high speed output device may mean that you must install a special printer interface card in the
computer.
There should be installation instructions supplied with any interface card and there are some general
guidelines in the separate Navigator RIP Installation Guide for each platform.

2.3 Navigator RIP folder structure
The folder in which the Navigator RIP is installed contains the Navigator RIP application itself, and a
folder called SW, as well as other support files. The SW folder contains the files that the RIP needs in

Navigator RIP version 9

User Manual

29

Running the Navigator RIP

order to run, such as device driver files, PostScript language header files, and fonts. You can install
new device drivers, features, and so on in many cases by placing the relevant folders or files directly
into the appropriate folder, but it is safer to use a supplied installation program if there is one.
Warning: Do not delete any files from the SW folder, except in the limited cases where this manual or
Xitron support staff advise you to do so.
Note: Installing the Navigator RIP creates some of the following items immediately: other items are
created later, as required by later reconfiguration of the RIP or the use of particular options such as
screening features or spooled input.
The SW folder contains the following items:





The caldata folder, which is created when you first use the Output > Print Calibration menu
option to print a calibration target, and is updated as you print more targets. This folder holds
files and folders describing the printed targets. If you use the Genlin program to measure a
printed target, it generates a file of results in this folder.
The categories folder contains the categories resource.
The charstrings folder contains the file StandardCharStrings, which contains the standard nameto-character mappings used by most fonts. Other mapping files may also be stored here.



The CIDFont folder contains fonts defined in the CID (character identifier) format.



The CMap folder contains information for use with CID fonts.



The colorrenderings folder contains color rendering resources.



The colorspaces folder contains resources for the color spaces defined in the Navigator RIP.





The Complete folder is provided as a default location for the spool folder input to place files
that it has successfully processed.
The Config folder contains all the configuration files for the Navigator RIP. These include files
detailing such things as the current Page Setup and Configure RIP settings, as well as folders
for information including the configuration for available devices, default color profiles, and
target definitions.
In the Config folder, the Factory Settings subfolder contains the default configuration for the Navigator RIP when it is shipped. This is essentially a copy of the Config folder itself.
In the Config folder, the Page Setups subfolder contains all the Page Setups you have saved
within the Navigator RIP.










30

The Crdgen folder contains the color rendering dictionary (CRD) generator plugin executables.
You can only manipulate CRDs in the RIP with the ColorPro option enabled.
The Devices folder contains all the output plugin files (possibly within subfolders) for the various output devices.
The encodings folder contains the font encodings for the fonts installed in the RIP.
The Error folder is provided as a default location for the spool folder input to place files that it
cannot process.
The Extensions folder can contain folders or files used to implement extensions to the RIP.

User Manual

Navigator RIP version 9

2.3






Navigator RIP folder structure

The FlatPgbDir folder provides space for the page buffer files used by FlatOut. See the FlatOut
User Guide for details.
The fonts folder contains fonts used by the RIP (including the fonts installed with the RIP).
The FontSet folder is used for PostScript LanguageLevel 3 font sets, often used with CFF fonts.
It may be empty.



The forms folder contains resources for bitmap forms.



The halftones folder contains halftone resources.
Note: The comments in these halftone resources files show how you can define custom dot
shapes in capable graphics and layout applications, and have these dot shapes linked to screens
in the generated PostScript language files.





















The icccrd folder contains the color rendering dictionaries (CRDs) produced from ICC profiles.
The IdiomSet folder contains idiom set resources. Each idiom set in this folder is loaded when
the RIP starts.
The Inputs folder contains all input plugin files (Spool, and any others).
The Messages folder has been moved to the same level as the SW folder and contains localized
message files. The appropriate file is selected the first time the RIP is started
The MediaSavingDir contains page buffers that are marked for media saving. From Eclipse
Release SP1 the MediaSavingDir is located as a subfolder to the PageBuffers folder.
The NamedColor folder is the location of files defining a resource type /NamedColor, which
stores color values referred to by name. It is accessed by the Install ICC Profile dialog box
present when using ColorPro, as well as by the RIP.
The NamedColorOrder folder contains files defining the orders in which resources of type
/NamedColor, are searched when the RIP is looking for the definition of a named color.
The Page Features folder contains all the PostScript language header files that are available in
the Enable Feature drop-down list of the Edit Page Setup dialog box. This menu is generated
dynamically from the files available in this folder. If a feature is turned on in the relevant Page
Setup, the appropriate file is run at the beginning of the job. Additional example page features
are available in the folder called Examples within this folder. The example files supplied with
the RIP show you how to do such things as produce draft copies, perform page imposition,
resubmit page buffers, and use image replacement with DCS files. You can add your own files
if you wish.
The PageBuffers folder provides space for rendered pages that are written to disk. From Eclipse
Release SP1 the MediaSavingDir is located as a subfolder to the PageBuffers folder.
The Passwords folder may be empty but is available for files used to install passwords for
optional parts of the Navigator RIP. The RIP installs all new passwords automatically, as it
starts. Files with extension .pwd are files to be used by the RIP, files with numeric extensions
(.001, .002, and so on) have been installed, and files with extension .pwx are files that the Navigator RIP has failed to install.
The patterns folder contains resources for PostScript language patterns.

Navigator RIP version 9

User Manual

31

Running the Navigator RIP






















32

The PrepFiles folder contains all the prep files used by the Navigator RIP.
The procsets folder contains various patches to the PostScript language, as well as other functionality that is not built directly into the RIP. Patches for specific applications are held here, as
well as calibration test jobs.
The ReproductionCriteria folder is the location of files defining a resource type /ReproductionCriteria. This is used to link color rendering dictionaries (CRDs) to the criteria which created
them. This allows the RIP to test whether a CRD needs to be regenerated or whether one
already exists.
The Screenin folder contains screening plugins for use by the RIP. In many installations, there
are no screening plugins.
The Screens folder is used when halftone screens are cached (saved to disk for later use). There
is a subfolder here for each dot shape cache known to the Navigator RIP, either as supplied or
as created during use.
The Separation Features folder performs a similar task to Page Features but applies only when
separating jobs in the Navigator RIP.
The Spool folder is a default location used by the Spool folder input plugin for receiving jobs.
The Sys folder includes HqnStart, the startup file, and Bootlist, a list of files to be executed upon
booting (starting) the Navigator RIP. This folder also contains HqnProduct, which contains PostScript language startup code specific to that product, and HqnOEM, which may contain additional startup PostScript language startup code created by Xitron. The folder may also contain
extra start boot code files related to Navigator Server.
The targeteps folder contains any EPS files that are incorporated in custom calibration targets
(and potentially other targets). This folder is referred to from target definitions while interpreting a target file, especially in response to the Print Calibration dialog box.
The tmp folder is used as a location for temporary files.
The TrapParams folder is used for PostScript LanguageLevel 3 trapping parameters. It may be
empty.
The Usr folder contains several files needed by the Navigator RIP.

User Manual

Navigator RIP version 9

2.4



Starting up the Navigator RIP

The Utilities folder contains files, each of which can perform a useful function when run as a
job (using the Print File menu option):


BackupConfiguration.ps 

This file enables you to make a backup file containing all your configuration settings for an
installation of the Navigator RIP.


BackupFonts.ps

This file enables you to make a backup file containing all your fonts, both the standard set
and any additional fonts that you have installed.
You can store such a backup file elsewhere for security and, for example, use it as a simple way
to restore a complex configuration if you need to reinstall the same version of the Navigator
RIP. (You can restore backed-up fonts to a newer version of the RIP but you can only restore
configuration settings to the same version of the RIP.)
Note: The BackupFonts.ps and BackupConfiguration.ps files should only be used via the Print
option on the File menu. Attempting to use these files from a socket input may cause the RIP to
crash.
The WorkSpace folder provides space for any temporary workspace files created by the RIP.




The LOGFILE file contains a record of all transactions with the Navigator RIP monitor. This
file can be saved and its size restricted. For more information see Monitoring the Navigator
RIP on page 55.
The files FILERED.PS and FILEMAP.DAT (replacing FILEMAP.PS, which is still present for
short-term compatibility) contain important information for use in file name mapping. The RIP
manages these files automatically: you must not change these files manually.
File name mapping is necessary because PostScript language file names can be very long, can
contain characters that have special meanings for file systems on the computer running the Navigator RIP, and are case sensitive. For each PostScript language file name that could be a problem, the RIP creates a unique and acceptable file name in the file system and records both file
names together as a mapping in FILEMAP.DAT.
You may find it useful to inspect FILEMAP.DAT, if you need to associate a particular file name
with the other name in its mapping. For example, this is a typical mapping (between Press and
PRESS):
(Press)(PRESS)M

Note: The file names are all uppercase, exactly as shown in this manual. It is possible for
Explorer in Microsoft Windows to display these names with only a leading capital letter.


The version file contains text describing the version of the Navigator RIP, for use by some RIP
utilities. Do not edit or remove it.

2.4 Starting up the Navigator RIP
To start up the Navigator RIP application, choose the Navigator RIP entry from the Start menu, or double-click the Navigator RIP icon in the install folder:
.exe

Navigator RIP version 9

User Manual

33

Running the Navigator RIP

An initial dialog box is always displayed while the program starts up. Some extra things happen in
special circumstances:




When you are starting up the RIP for the first time after installation, you see a dialog box
asking you to choose the language to be used in dialog boxes, menus, and messages. The
dialog box shows you which languages are available. (A language is available if the entries
after its name are all Present or Yes.) If you are in doubt, choose English (United States) initially;
you can switch to another language later, using the Navigator RIP > Language menu option, as
described in Choosing the user interface language on page 188. Select your chosen language
and click OK.
When you have installed a plugin or other option, that option may require enabling with a password. The RIP can read the password from a file if the installation process for the plugin supplied one. If the RIP reads a password file, it displays a dialog box with a message similar to
this but with differences to the italic text.
Imported password file Passwords/1234-56-variable-string.pwd

Click OK to dismiss this dialog box.


If you have chosen to reset the Navigator RIP to its factory settings, you see a series of dialog
boxes asking you which settings you wish to reset. See Resetting the Navigator RIP to default
values on page 188 for details of how to do this.

When the RIP has finished loading, a window containing the following menu items appears:

Figure 2.1 The Navigator RIP menus

Some windows appear, as described in Chapter 3, Getting Started with the Navigator RIP. That chapter describes some basic procedures that you can use to familiarize yourself with the Navigator RIP.
The remainder of this chapter introduces the menus, tool bar, and status bar; and describes how to stop
the RIP.
For information on how to quit the RIP see Quitting the Navigator RIP on page 41.

2.4.1 The headless RIP
The Navigator RIP can be run in headless mode. This means that the RIP is run as normal but without
any graphical user interface. In this mode all interaction with the RIP is done using PostScript language files.
Before using headless mode you should at least have configured an AppleTalk input (if supported) or
a Spool folder. You can shut down the headless RIP by submitting a suitable PostScript language file.
See Quitting the headless RIP on page 41 for more information.
To start the RIP in headless mode navigate to the installation directory and use:
.exe -headless

34

User Manual

Navigator RIP version 9

2.4

Starting up the Navigator RIP

Alternatively, if you wish to start the RIP in headless mode every time you start the RIP, open the file:
/SW/Config/UIPreferences

Change the line:
/Headless false

to:
/Headless true

Save the UIPreferences file and then start the RIP in the normal way.
If you have configured the UIPreferences file to start the RIP in headless mode you can start the RIP in
GUI mode by navigating to the installation directory and using:
.exe -gui

To stop a RIP running in headless mode see Quitting the headless RIP on page 41.
When run as a headless RIP the page buffering mode is automatically changed to Single (if required).
See Page buffering modes on page 57 for more information.
From the Navigator RIP v7.1 the page buffering mode can be changed from Single (if required) to one
of the other available throughput modes. This can only be done using a PostScript Language file or via
SOAR.

2.4.2 The menus
There are several menus:






The Navigator RIP menu contains commands for configuring and operating the RIP, as well as
for producing output.
The Edit menu contains the common window-based edit facilities of Cut, Copy, Paste, and
Clear.
The next menu changes name to indicate which device it is controlling. This menu contains
commands for controlling output and cutting the media being used on any printers connected to
the computer. Because the displayed name can change, this documentation refers to it as the
Device menu. (Figure 2.1, page 34, shows Preview in this position.)
The device does not necessarily have to be a physical output device connected to your machine.
The RIP is equally capable of saving an image to a file in a particular format, such as TIFF. You
can find out more about these options in Selecting different devices on page 80.







The Color menu contains commands for starting the Separations Manager and for color management. The color management commands depend on optional parts of the Navigator RIP. See
ColorPro menus on page 40.
The Output menu contains commands for controlling calibration, media management, and output.
The Fonts menu contains commands for installing, deleting, and proofing fonts within the RIP.

Navigator RIP version 9

User Manual

35

Running the Navigator RIP



When required, the RIP can display other menus to the right of the permanent menus mentioned so far. For example, the Print File menu appears when you have used the Print File command to print a file, and contains commands allowing you to control printing of that file.

All standard commands in these menus are described in later chapters of this book together with the
situations and operations that require you to use them. See Menus affected by optional features on
page 39 for details of menus affected by optional features in the Navigator RIP.

2.4.3 The tool bar
All versions of the Navigator RIP have a tool bar containing icon buttons and a status area. The buttons provide rapid access to frequently used menu options and dialog boxes, as described in Tool bar
buttons on page 37. The status area shows what the RIP is doing, as described in Status area on page
38.
The tool bar is part of the main window.

36

User Manual

Navigator RIP version 9

2.4

Starting up the Navigator RIP

2.4.3.1 Tool bar buttons
These tool bar buttons have the following uses:
Print File

Displays the Print File dialog box, where you can choose a
file to print. This is equivalent to the Navigator RIP
> Print File command.

Print Calibration

Displays the Print Calibration dialog box, where you can
print various patterns of calibration target for use in calibrating output devices, including printing presses. This is
equivalent to the Output > Print Calibration command.

Start Inputs

Starts any enabled inputs. This is equivalent to the Navigator RIP > Start Inputs command when the inputs are
stopped.

Stop Inputs

Stops any enabled inputs. This is equivalent to the Navigator RIP > Start Inputs command when the inputs are
enabled.

Page Setup Manager

Displays the Page Setup Manager dialog box, where you
can create and edit Page Setups. This is equivalent to the
Navigator RIP > Page Setup Manager command.

Device Manager

Displays the Device Manager dialog box, where you can
instantiate (create) and configure devices driven from a
multiple device driver. This is equivalent to the Navigator
RIP > Device Manager command.

Separations Manager

Displays the Separations Manager dialog box, where you
can create and edit separation styles for the selected
device. This is equivalent to the Color > Separations
Manager command.

Color Setup Manager

Displays the Color Setup Manager dialog box, which
allows you to create and edit color setups with or without
color management depending on whether the passwordenabled ColorPro option is activated. See the Color Setup
on page 354 and ColorPro User Guide for details. This is
equivalent to the Color > Color Setup Manager command.

Navigator RIP version 9

User Manual

37

Running the Navigator RIP

TrapPro Manager

Displays the TrapPro Manager dialog box, which allows
you to create and edit trapping setups. TrapPro is a layered
option and requires a password for it to be activated. See
the TrapPro User Guide for full details. This is equivalent
to the Output > TrapPro Manager command.

Calibration Manager

Displays the Calibration (Dot Gain) Manager dialog box,
where you can create and edit calibration sets. This is
equivalent to the Output > Calibration Manager command.

Cassette Manager

Displays the Cassette Manager dialog box, where you can
create cassettes and edit their information. This is equivalent to the Output > Cassette Manager command.

Imposition Manager

This option displays the Imposition Manager dialog box,
which allows you to create and edit Simple imposition setups. Pre-configured imposition schemes are provided as
standard. Editing existing and creating new setups is a layered option and requires a password for it to be activated.
See Chapter 10, Simple Imposition for full details. This is
equivalent to the Output > Imposition Manager command.

Input Controller

Displays the Input Controller dialog box. Also, this button
hides the controller if it is already displayed. This is
equivalent to the Navigator RIP > Input Controller command.

Media Manager

Displays the Media Manager dialog box, where you can
set up automatic media management. This is equivalent to
the Output > Media Manager command.

Note: The Device Manager, Separations Manager, Color Setup Manager, Calibration Manager, and Cassette Manager buttons are also available from the Edit Page Setup dialog box.

2.4.3.2 Status area
The status area has three sub-areas: one shows what the input system and interpreter are doing, one
shows what the output system is doing, and a final one shows the most recently used output device.

38

User Manual

Navigator RIP version 9

2.5

Menus affected by optional features

Figure 2.2 shows some typical contents of the status area.
1

2

3

4

Figure 2.2 The status area of the tool bar

The meanings of these example status bars are:
1 Idle

The RIP is not looking for jobs on its inputs.

2 Scanning

The RIP is looking for input but none is arriving.

3 Interpreting

The RIP is interpreting a job.

4 Printing

The RIP is sending a job to an output device.

In all these examples, the output device is the Preview device. The text can change to show other types
of output, including output to graphics files and real printers and imagesetters.
This completes a brief description of the controls and status indicators in the Navigator RIP. If you
want to try using the RIP, see Chapter 3, Getting Started with the Navigator RIP on page page 43. If
you want to stop the RIP, see Stopping the Navigator RIP on page 41.

2.5 Menus affected by optional features
A number of commands and options in dialog boxes appear only if your copy of the Navigator RIP
has been supplied with certain optional features and these are enabled.
The major features that have this effect are:



ColorPro. See ColorPro menus on page 40.
The Screening Library. The visible changes are limited to new dot shapes in the screening part
of the Edit Style dialog box, as described in Chapter 6, Screening.



TrapPro. See TrapPro on page 40.



Media Saving. See Advanced Media Saving on page 112.

Navigator RIP version 9

User Manual

39

Running the Navigator RIP



Simple Imposition Manager. See The Imposition Manager on page 260.

2.5.1 ColorPro menus
ColorPro is a color management system that can work as an integrated part of the Navigator RIP. If
relevant options within ColorPro are present and enabled, the following commands appear. See the
separate manual entitled ColorPro User Guide for full details.
In the Color menu:
Color Rendering Intent Manager

This command allows you to create and edit custom color reproduction strategies in ColorPro. It appears only when the ColorPro option is enabled.
Color Setup Manager

A standard set of options is available with the Color Setup Manager without
ColorPro including Black generation and Undercolor Removal (UCR) control and color management override options. When ColorPro is activated an
extended set of options is available. You can create and edit color setups
including the selection of input and output profiles, rendering intents and
press emulation.
Install ICC Profile

This command supports the use of industry-standard color profile files which
enable portable definitions of the characteristics of printers, printing processes, presses, scanners, and other equipment. It appears when ColorPro is
enabled.
Uninstall ICC Profile

This command uninstalls ICC profiles and appears when ColorPro is enabled.

2.5.2 TrapPro
TrapPro is an option for the Navigator RIP that can be set up to perform trapping. If TrapPro is present
and enabled, the following command appears in the Output menu. See the separate TrapPro User
Manual for full details.
TrapPro Manager

This command displays a dialog box where you can inspect and create different sets of rules for
trapping. These rules become available in the Trapping section of the Page Setup dialog box.
See Trapping features on page 365 for details.
Ink Set Manager

This command displays a dialog box where you can configure various types of ink including
normal, opaque and transparent.

40

User Manual

Navigator RIP version 9

2.6

Stopping the Navigator RIP

2.5.3 Media Saving
Media Saving is a layered option for the Navigator RIP which is enabled using a password. If Media
Saving is present and enabled, the Media Saving option appears in the Output menu.
Media Saving

This option displays a dialog box where you can view the various flats being created and view,
roam or delete the various pages used to make up the flats. See Section 5.15, Advanced Media
Saving for details.

2.6 Stopping the Navigator RIP
You can stop the RIP whenever you wish but you should keep it running as much as possible whenever you expect jobs to be input. There are very few cases where you must stop the RIP: for example,
you must stop the RIP when you shut down the computer running the RIP or when you update your
copy of the RIP.
The state of the RIP when you stop it is also the state that the RIP assumes when you next start it. For
example, if you quit the RIP when inputs are active then the RIP restarts with the same inputs enabled.

2.6.1 Quitting the Navigator RIP
If you are the only user of the RIP, all you must do is ensure that no jobs are in progress and choose the
Quit command in the Navigator RIP menu. Take more care if there are other users, as described here.
If the RIP is providing a network service, warn the other users that there will be an interruption of service.
Disable output, by selecting the check box labeled Disable output in the Output Controller, if you are
operating in either of the multiple modes. This shuts down the output cleanly, by allowing the current
job to complete but not starting any other jobs. (When you restart the RIP, output is re-enabled automatically, though you will have to answer a question if there are any jobs waiting to be output in the
Active Queue.)
Wait for any active jobs to complete.
Leave the RIP settings in their usual state, unless you know that you will be making significant
changes to the RIP, the computer, the network, or connected output devices.




If you leave settings unchanged, you need only restart the RIP to have it start responding to all
its previous inputs.
If you are making changes, you may prefer to disable inputs from other computers until you
have restarted the RIP and proved that there are no resultant problems.

From the Navigator RIP menu, choose Quit (or press Ctrl+Q) to exit the RIP.

2.6.2 Quitting the headless RIP
To quit the headless RIP a file containing the following PostScript Language code can be placed into a
spool folder:

Navigator RIP version 9

User Manual

41

Running the Navigator RIP

$printerdict /superstop /superstop put
systemdict /quit get exec

Note: If a file containing this code is placed into a spool folder to quit the RIP, the file will not be automatically moved from that folder when the file is run. Therefore, you should ensure that the file is
moved before attempting to re-start the RIP.
Alternatively, on Windows use Ctrl Alt Delete and end the Navigator RIP process.

2.6.3 Stopping the computer
If you are also stopping the computer, exit any other applications and follow the usual procedure
described in the manual for your computer or operating system.
Once you have followed the procedure, wait until you see a message saying that you can remove
power. Switch off the computer.

42

User Manual

Navigator RIP version 9

3
Getting Started with the Navigator
RIP
Chapter gave a broad overview of the kinds of tasks the Navigator RIP can perform. In this chapter
you will learn how to process simple jobs, and how to switch between different configurations.

3.1 A simple Navigator RIP session
Once the Navigator RIP is installed and running on your machine, you can start to use it. Starting up
the Navigator RIP on page 33 describes how to start the RIP and gives an overview of the menus and
tool bar.
It is a good idea to start with a short test job and to view it on screen so that you avoid wasting materials. (Even when you are familiar with the RIP you should consider using such an on-screen test when
processing a new kind of job for the first time.)
Note: This manual uses some conventions of font and style to describe special key combinations and
to highlight the titles of programs and dialog boxes, options in menus and dialog boxes, and text that
we suggest you type. For details, see Conventions on page 4 in the Preface.

3.1.1 Creating a Page Setup
First, you need to create a convenient Page Setup, a collection of settings that the RIP uses to process
the jobs submitted to it:
1. Choose the Page Setup Manager option from the Navigator RIP menu. If you cannot choose this
option, stop inputs to the RIP. To do this, click the tool bar button that shows a red arrow and
traffic light, or choose the Navigator RIP > Start Inputs menu option.
2. In the Page Setup Manager, as shown in Figure 3.1, select a Page Setup. Default Page Setup is a
safe choice: select it and click Edit to display the Edit Page Setup dialog box. If you want to
create a new Page Setup, the easiest way is to copy the Default Page Setup. Select Default Page
Setup and click Copy to display the New Page Setup dialog box.

Navigator RIP version 9

User Manual

43

Getting Started with the Navigator RIP

Figure 3.1 Page Setup Manager dialog box

3. In the Edit Page Setup dialog box, shown in Figure 3.2, set the Device to None and the Vertical
and Horizontal resolutions to something small, say 72 dpi. If you change the Device, you must
choose a separations style listed in the Style drop-down list and, for some devices, a cassette
name from the Cassette drop-down list.
For the purposes of this example, you can select any option from these lists. For more information about the options in this dialog box, see Edit Page Setup dialog box on page 77.
The None device does not produce any printed output, but does perform all the necessary processing for the job, including producing page buffers as defined on page page 404 in the Glossary. This device can be used for testing and timing jobs, and is especially useful for previewing
the job on screen.

44

User Manual

Navigator RIP version 9

3.1

A simple Navigator RIP session

Figure 3.2 New Page Setup dialog box

4. Click OK. (Click Save As if you are working in the New Page Setup dialog box, and save the
Page Setup as Default Page Setup; this changes the original Page Setup but it is convenient for
use this name during this session.)
5. Click OK again to close the Page Setup Manager dialog box.
The Output Controller/Monitor window must be displayed for you to see the processed output for the
None device. If you cannot see this window: first choose the Configure RIP option from the Navigator
RIP menu and check that the option shown against Page buffering is Multiple (Parallel); then display the
Output menu and look at (but do not choose) the option Output Controller.
If there is a check mark next to the menu option, the RIP is displaying the window but it may be hidden behind another window. The Output > Output Controller menu option can be used to toggle
between opening and closing the Output Controller/Monitor. Each time that you open the Output Controller/Monitor it opens in front of all other RIP windows.
Note: The Output Controller is only available in either of the multiple page buffer modes. You can
also view a page in one of the single modes by setting the output device to Preview instead of None. In
the following description we assume that you are working in Multiple (Parallel) mode. If you are using
one of the single modes, see Sending output to the screen on page 82 for more details about previewing pages.

Navigator RIP version 9

User Manual

45

Getting Started with the Navigator RIP

For the example job described next, make sure that you have deselected the Disable output check box
in the Output Controller/Monitor. This box is selected by default, so that you can hold pages for onscreen viewing before sending the pages to real output devices.

3.1.2 Creating a simple job
You also need to set up a sample job. Usually, jobs are files created by another application, but you
can create a simple job within the RIP, as follows:
1. From the Fonts menu, choose Proof Fonts. A window appears with a list of the available fonts,
which the Navigator RIP can use with any of its possible output devices. (See Figure 3.3.)

Figure 3.3 Proof Highlighted Fonts dialog box

2. Select between one and six fonts. To select a range of fonts, click on the first font of that range
and then hold down the Shift key when you click to select the last font.
3. From the Page Setup drop-down list, select Default Page Setup.
4. Click the Proof button. Several things happen on screen, with some items appearing and quickly
disappearing again:








46

A Print File menu appears alongside the other RIP menu titles. This menu disappears when
the job is complete.
The status area on the right of the tool bar in the Navigator RIP window shows an animated
picture of a hand writing a page. None appears in the status area on the right. (When you
use other output devices, you see other animations and names.)
Text reporting the progress of the job appears in the scrolling text area of the Navigator
RIP window as the RIP starts the job and reads the necessary fonts.
At least one progress dial window also appears and shows what is happening. For example,
the Read Dial shows how much of the job the RIP has read and disappears when the RIP
has processed the complete job. With a small job like this proof and a fast computer, the
Read Dial may not appear; Figure 3.4 shows the dial. Other dials can appear, depending on
the size of the job and the settings in your copy of the RIP.

User Manual

Navigator RIP version 9

3.1

A simple Navigator RIP session

Figure 3.4 Read Dial

Notice what happens in the Output Controller/Monitor window. A job called 1. fontlist appears in the
list on the left, the Active Queue. After a few moments its name moves into the box at upper center of
the window, to show that the RIP is processing it, and then to the Held Queue on the right. (The job is
called 1. fontlist, to show that it is the first page of the fontlist job. This job is probably only one page
long, unless you chose several fonts.)

3.1.3 Previewing the image on screen
This job has now been processed by the Navigator RIP and sent to an output device. The output device
you chose was None, a dummy device provided for test runs like this one and for previewing, so no
physical printing has happened. However, you can look at an on-screen view of the page you have
created:
1. Select the job in the Held Queue (by clicking), and then click the Roam button. A Roam window
appears. Note that you can preview any page in the Output Controller.
The Roam window displays samples of the fonts you selected. (See Figure 3.5.) This window also displays the title of the page, 1.fontlist, the color of the page, and the resolution.
For most sizes of page, there are also horizontal and vertical scroll bars at the edges of the Roam window. (The scroll bars appear only when the window is too small to display the whole page at one
time.) When there are scroll bars, you can use them to move your view to different parts of the page
image. Alternatively, you can drag the page image around by holding down the left mouse button
when the cursor is over the image and moving the mouse. For more information about navigating in
the Roam window, see Roam and Preview windows on page 84.

Figure 3.5 Roam window

Navigator RIP version 9

User Manual

47

Getting Started with the Navigator RIP

Note: When viewing a higher resolution image, the Roam > Reduced Roam menu option is probably
available. It allows you to see more of the image in one view.
When you have finished inspecting the page preview, close the window. To do this, choose the Close
option in the window control menu. Alternatively, you can use the standard methods for your operating system.
Note: You must close the Roam window (and the Reduced Roam window if you opened it) before you
can roam another page.

3.1.3.1 Other pages in the job
If there are other pages in the job, the RIP has probably processed them in the time you spent inspecting the first page: if so, there are appropriate messages in the Navigator RIP window and new entries
in the Held Queue on the right of the Output Controller/Monitor. Any following pages are called
2. fontlist, 3. fontlist, and so on. You can:



View one of the processed pages by selecting it and clicking the Roam button.
Stop processing any remaining pages by using the Kill Current Job option in the Print File
menu. Any pages already processed stay in the Held Queue until deleted.

3.1.3.2 Killing jobs and error messages
After killing a job and depending on what stage the job had reached, you may see a PostScript language error message in the Navigator RIP window. Error messages look similar to the following:
%%[Error: interrupt; OffendingCommand: interrupt; File: %disk0%tmp/fontlist]%%
Job Not Completed: fontlist

Such error messages are harmless if you stopped the job: they simply report that the job stopped
before it was complete.
In other circumstances, an error message alerts you to a possible problem with a job. The details of the
message may help a PostScript language programmer or your support organization to diagnose the
cause of that problem.

3.1.4 Outputting to a real device
Your installation of the Navigator RIP has probably been set up to be able to talk to a real printer or
imagesetter and, if this is so, you can try sending some output to it. (If you do not have a suitable physical output device, try using None again but vary the screen resolution to a value in the range 300
through 600 dpi, so that you can see more detail. Run another job proofing fonts, then move to the
next section, Sending a job to the Navigator RIP on page 50.)
To send output to a physical device:
1. First display the Navigator RIP menu and choose the Page Setup Manager option (which this
manual often describes as choosing the Navigator RIP > Page Setup Manager option).

48

User Manual

Navigator RIP version 9

3.1

A simple Navigator RIP session

2. In the Page Setup Manager dialog box, select Default Page Setup and click Copy to display the
New Page Setup dialog box. The New Page Setup dialog box is very similar to the Edit Page
Setup dialog box, shown in Figure 3.2 on page page 45.
3. Select your preferred physical device from the Device drop-down list.
Note: If the device is not listed in the Device drop-down list, you may need to configure it using
the Device Manager, available from the button next to the Device list and described in Chapter 5,
Configuring Output Formats. It is probably easier to use the None device to do another screen
preview.
4. Assuming that you have successfully chosen a physical device, set the resolution and any other
required options in this New Page Setup dialog box. Note that if you change the Device, you
have to choose a separations style from the Style drop-down list and, for some devices, a cassette
name from the Cassette drop-down list.
5. Click Save As; the RIP displays the Save Setup dialog box. In the Save As text field type a name:
Default to Printer is suitably descriptive, so type that name then click Save.
Note: The Navigator RIP limits all user created names or file names to 31 bytes. This is equivalent to 31 characters when using standard ASCII text, and 15 characters when using double-byte
character sets, such as Kanji.
6. Click OK to close the Page Setup Manager.
7. Choose Media Manager from the Output menu and select the Disable media management box.
(You need to configure the media management before using it - that topic is covered in Chapter
9, Media Management.)
8. Now create a new sample job as before, by choosing the Fonts > Proof Fonts command and
choosing some fonts from the Proof Highlighted Fonts dialog box.
9. From the Page Setup list, select Default to Printer and click Proof.
The RIP displays the same indicators of activity: text in the Navigator RIP window, an animated picture, and one or more progress dials. Another fontlist job appears in the Active Queue and a large, empty
rectangle appears just above the center of the Output Controller/Monitor and starts to fill with gray.
This rectangle is known as the progress box. Note that in either of the single modes, the progress box
appears in a separate window.
This time, when the job is being processed, watch the two gray bars that successively fill the progress
box, a light gray and a dark gray spreading from the top. The light gray bar represents the amount of
data the RIP has processed; the dark gray bar represents the amount that has been sent to the output
device (printer).
Note: The bottom edge of the light gray bar should always be ahead of (below) the dark gray. If the
dark gray catches up, the page may not be output properly, it depends how the printer reacts to having
to wait for data. In this case the RIP printer buffer has probably been set too small, and you should
increase its size. You can do this in the Configure RIP dialog box available from the Navigator RIP >
Configure RIP menu command. Typical sizes are in the range 4 MB through to 12 MB.
When the dark gray has reached the bottom of the progress box, the RIP has finished the job and the
progress box clears. If the job was processed successfully, you can now pick it up from your output
device. If the job does not output, or stops and starts while outputting, you may need to reconfigure the
Navigator RIP version 9

User Manual

49

Getting Started with the Navigator RIP

RIP or the host machine. (To help you identify a problem, the text window in the Navigator RIP window displays and records any error messages.)
The Output Controller/Monitor provides another two useful facilities:


If you want to reprint a page once it is in the Held Queue, you can do so easily: just drag it with
the mouse back into the Active Queue. Try that with the top fontlist job now: it is sent again to
the same device, which should be None. If you did the same to the other fontlist job (which was
sent to your imagesetter or printer), the RIP would produce another hard copy.
It is very quick to output a page like this again, because it has already been processed once; the
RIP stores the raster data, and just sends this data again to the relevant output device. By
default, the RIP deletes processed jobs from the Held Queue only when it is necessary to free up
disk space for new jobs.



If you select a job and click on the Info button (or just double-click on the job), the RIP brings
up the Throughput Info dialog box, which contains the settings for that particular job. You can
change some of these settings before reprinting the job.

Note: If you are roaming a page, there are fewer available options in the Output Controller. For example, you must close the Roam window (and the Reduced Roam window if you opened it) before you
can roam another page.

3.1.5 Sending a job to the Navigator RIP
You have seen how the Navigator RIP processes a simple job, created within the RIP. Now it is time to
see how to send a real job.
If you want to print a file, you can do so directly by choosing Print File from the Navigator RIP menu
and specifying that file. Try printing a file now, if you have a small file available: for example, a PostScript language file. The RIP interprets the file and sends it to the printer or on-screen preview,
according to the Page Setup that you choose in the Print File dialog box.
Using the Print File command on page 216 describes this method and the following sections describe
other types of files that the Navigator RIP can print.
Usually, however, you will want to let the RIP accept input directly from other applications. We shall
see how to do this using AppleTalk (if supported), and publish a printer visible to Macintosh computers on your network. For more details on supplying jobs to the RIP, see Chapter 8, Configuring Input.

3.1.5.1 Publishing a setup with AppleTalk
Note: The AppleTalk plugin is not installed on Windows Vista or Windows 7 where this protocol it is
not supported.
Note: AppleTalk is no longer supported in the Windows operating system. You can use 3rd party
Appletalk installations if you must. If AppleTalk is not already enabled or you do not have a suitable
Macintosh computer, you can create the Page Setup described here but use a spool folder input as
described in Using the Navigator RIP with a spool folder on page 54.
First, if you are outputting to an imagesetter and want to produce color separations, you should turn on
HPS, Global Graphics proprietary high-quality screening system. To do this:

50

User Manual

Navigator RIP version 9

3.1

A simple Navigator RIP session

1. In the Page Setup Manager select the Page Setup that uses this output device we suggested
Default to Printer and click Edit.
2. Click the Separations Manager button (next to the Style list) in the Edit Page Setup dialog box to
open the Separations Manager.
3. In the Separations Manager select an appropriate style from the list, for example CMYK
Separations (Halftone), and click Edit to open the Edit Style dialog box.
4. In the Edit Style dialog box, select the check box marked Use Harlequin Precision Screening this
enables a high-quality screening method (HPS). Click OK to save your change and close the
Edit Style dialog box, and then click Select to close the Separations Manager. The name of the
style that you just edited appears in the Style list.
5. Click OK twice more to exit the Edit Page Setup and Page Setup Manager dialog boxes.
Because this may be the first time you have used this screening method, HPS has to cache (save)
information on disk; this may take a few minutes. This happens with each new resolution, dot shape,
and screen frequency you use: the RIP displays a suitable progress dial as it caches each screen. For
more information about the options in the Edit Page Setup dialog box, see Edit Page Setup dialog box
on page 78.
To publish a printer on the network:
1. Choose Input Controller from the Navigator RIP menu (or bring that window to the front if there
is already a check mark against that menu option).
2. When the Input Controller dialog box appears, click New to display the Input Channel Edit
dialog box.
3. In the Input Channel Edit dialog box, choose a Name for the printer you are about to publish, say
Brill-O-Print, and type it in. Select AppleTalk from the Type menu list and select Default to Printer
from the Page Setup menu list. Make sure that the Enabled box is selected and click OK.
Note: The RIP may fail to publish an AppleTalk input. If so the relevant entry in the Status column of
the Input Controller dialog box shows Stopped.
You can leave the Input Controller dialog box displayed or close it. See if there is a check mark in
front of the Start Inputs option in the Navigator RIP menu; if there is no check mark, choose this menu
option. You will see a progress dial appear as the new setup is published.
Now go to a Macintosh computer elsewhere on your network, and try to print a document. Among the
available printers shown by the Chooser, you should now see Brill-O-Print. If you send a job to this
printer, the RIP again displays the progress box filling with light and dark gray bars to show the job
being processed in the usual way. The progress box is part of the Output Controller in either of the
multiple modes, or a separate window in either of the single modes.
To disable a single AppleTalk input or other input temporarily, select it in the Input Controller and
click Off. To remove an input permanently from the Input Controller, select the entry and click Delete.
See Using the AppleTalk input plugin on page 196 for more information.

Navigator RIP version 9

User Manual

51

Getting Started with the Navigator RIP

3.2 A more complex use of the Navigator RIP
You have seen how the Edit Page Setup dialog box lets you choose the output device and a variety of
effects that control the appearance of the pages you display.
Many publishing environments deal with more than one kind of document. For example, suppose that
you need to print a product manual in draft and final versions: draft documents need not be printed at
a high resolution, but final versions should exploit the full printing quality of the output device.
The Navigator RIP processes documents according to page setups. Each Page Setup specifies a complete page format in terms of the orientation, resolution, size, and so on; and provides a way to recall
that page format, easily and exactly. For full details, see Chapter 5, Configuring Output Formats.

3.2.1 Saving a Page Setup
To make and save a new Page Setup:
1. Stop inputs to the Navigator RIP if necessary. In the Navigator RIP menu, make sure that there is
no check mark in front of the Start Inputs option. Choose the Start Inputs option if there is a
check mark: this stops inputs. Alternatively, click the Stop Inputs button in the tool bar.
2. Choose Page Setup Manager from the Navigator RIP menu or click the Page Setup Manager button
in the tool bar. The Page Setup Manager dialog box appears, where you have two choices. If
there is already a similar Page Setup, select it and click Copy to display the Edit Page Setup
dialog box. (If there is no similar Page Setup, click New to display the very similar New Page
Setup dialog box.)
3. Edit the settings in the New Page Setup dialog box to give the configuration you want. Click
Save As.
4. The Save Setup dialog box appears, and you can specify a name for your new Page Setup in the
Save As text field. (See Figure 3.6.) Click Save to save the setup and return to the Page Setup
Manager dialog box.
You can verify that the setup was saved under this name by looking at the entries in the Page
Setup Manager dialog box. Whenever you want to output a job manually you can use this setup
by selecting its name in the Page Setup menu in the relevant dialog box: for example: the Print
File or Proof Highlighted Fonts dialog box. You can also configure the RIP to make named Page
Setups available to jobs submitted by other users and applications, as described next.

52

User Manual

Navigator RIP version 9

3.2

A more complex use of the Navigator RIP

Note: You can reorder the entries in the Page Setup Manager dialog box by selecting one or
more entries and dragging with the mouse. The order in the Page Setup Manager is the order of
appearance in menus where you choose a Page Setup typically when configuring a managed
input (described in Managing input plugins on page 193) or interactively printing a file
(described in Using the Print File command on page 216).

Figure 3.6 Save Setup dialog box

3.2.2 Associating a Page Setup with an input
Creating and saving Page Setups also allows you to make a published printer use a specific Page
Setup: this allows all users of the RIP to choose a suitable Page Setup for a particular job by choosing
the associated printer. Try the following to see how this works with just two published printers on the
network:
1. Display the Page Setup Manager. Copy the Page Setup Default to Printer‚ select it and click Copy.
In the New Page Setup dialog box, make no changes, just click Save As. Give this Page Setup the
name Pos.
2. In the Page Setup Manager, select Pos and click Copy to make a copy and start editing that copy.
In the Effects section of the New Page Setup dialog box, select the Negative check box and click
Save As.
3. Save the new Page Setup with the name Neg. Click OK to close the Page Setup Manager.
4. Display the Input Controller and create two new AppleTalk devices, as before, called Pos-OPrint and Neg-O-Print. While using the Input Channel Edit dialog box, select the Page Setup Pos
for Pos-O-Print and Neg for Neg-O-Print.
Once you have enabled the new inputs, and used Navigator RIP > Start Inputs, the RIP publishes the
two new printers on the network. Sending a job to Pos-O-Print causes it to be output as normal, while
jobs sent to Neg-O-Print are output in negative.
You can publish several more inputs to the Navigator RIP, each with different Page Setups. As well as
changing the Negative setting, you can change the output device, output resolution, rotation, screening
strategies, and many other settings.

Navigator RIP version 9

User Manual

53

Getting Started with the Navigator RIP

3.3 Using the Navigator RIP with a spool folder
Using a Spool Folder input, you can configure the Navigator RIP to print files placed into a common
folder, usually one accessible from other computers on your network. This means that various users or
applications can write files into a spool folder. The RIP repeatedly checks this folder, and when it
finds a new file, it processes the file. The RIP deletes each file from the spool folder after printing it
but, using the Spool Folder Configuration options, you can instruct the RIP to save the file in another
folder after printing.
The RIP associates each spool folder with a Page Setup, giving the benefits described in Section 3.2,
A more complex use of the Navigator RIP, when the RIP was published as a network printer. In particular, you can define several spool folder inputs, each with a different Page Setup, to match the needs
of different users or applications. (If you find it convenient, you can use the same Page Setup with a
spool folder and other types of input.)
To define a spool folder, follow these steps:
1. Choose Input Controller from the Navigator RIP menu (or bring that window to the front if there
is already a check mark against that menu option). When the Input Controller dialog box
appears, click New. In the Input Channel Edit dialog box, choose a Name for the output device
you are about to publish, say SpoolPrint, and type it in. Choose SpoolFolder from the Type menu
and for Page Setup choose an appropriate Page Setup.
Click Configure to specify the folder. The default folder is called Spool in the SW folder. You can
use any other folder that the RIP can access. See Using the Spool Folder input folder on page
200 for more information. Exit the Spool Folder Configuration dialog box by clicking OK.
2. In the Input Channel Edit dialog box, select the Enabled box and click OK to exit. If necessary,
choose Start Inputs from the Navigator RIP menu. You will see a dial appear as the new setup is
published.
This starts the spool folder and any other enabled inputs. If there are files already in the spool
folder, the RIP asks if you want to start by printing them. Files that are put into the folder after
this input is enabled are rendered and printed in order of arrival in the folder.
Note: The RIP may fail to publish a spool folder input. If so the relevant entry in the Status
column of the Input Controller dialog box shows Stopped. The most likely reason is that you
have tried to use a folder already in use by another spool folder input: return to the Spool Folder
Configuration dialog box and choose a new folder.
3. When you want to stop running the spool folder (and all other enabled inputs), choose Start
Inputs in the Navigator RIP menu again.
To disable a spool folder temporarily, select it in the Input Controller and click Off. To remove a spool
folders entry in the Input Controller, select the entry and click Delete. (Removing the entry does not
remove the associated folder on disk, nor any contents of that folder.)
Note: Even though PostScript Language compatibility level 1 is rarely used, you should note that the
spool folder plugin does not work with Page Setups set to PostScript Language compatibility level 1.
See PostScript language compatibility level on page 136 for more information. If this is attempted an
undefined findresource error will occur.

54

User Manual

Navigator RIP version 9

3.4

Monitoring the Navigator RIP

3.4 Monitoring the Navigator RIP
The Navigator RIP window shows the progress of jobs through the Navigator RIP. The text displays
information about timing, errors, job completion, fonts, and other messages.
Figure 3.7 shows some example messages in the Navigator RIP window.

Figure 3.7 Navigator RIP window messages

The window displays only messages since the start of the RIP session and can display the last 32,000
characters of these messages. (Within this limit, you can scroll back to inspect the messages for old
jobs: the window scrolls back to the end when new text appears.) In Multiple (Parallel) mode the
default page buffer mode timings require careful interpretation, because the RIP may be outputting
and interpreting jobs at the same time. Also, if the RIP has to pause (for example, to wait for disk
space to be freed), the timings may be misleading because of the variable time spent freeing space.
The RIP adds a copy of all the messages appearing in the text window to a file, called LOGFILE, in the
SW folder.
The size of the log file can be restricted by editing the GeneralPreferences text file found within the
Config folder in the SW folder.
By changing the value of /MaxLogfileSize to any value other than 0 will specify the maximum size of
the file in bytes. When this maximum value is reached LOGFILE will be changed to LOGFILE.OLD.
The size of the file is checked when the RIP is started and each time a message is written to the file.
Only one LOGFILE.OLD is retained. Therefore, you must be aware of the size of the log files and
rename them to keep all messages.
Note: You will only see messages that have been added to the log file since you started the current RIP
session. To view the entire contents of the log file including messages from any earlier sessions, you
must use a text editor like Notepad or WordPad, provided with Windows.
The log file is an important source of information when difficulties arise. Refer to it if you have any
problems.

Navigator RIP version 9

User Manual

55

Getting Started with the Navigator RIP

56

User Manual

Navigator RIP version 9

4
Navigator RIP Output Methods
This manual uses the term throughput to mean the productivity of your RIP workflow - how much
work you are completing in a given time. The Navigator RIP provides a comprehensive set of tools
that allow you to maximize your throughput.

4.1 Historical overview
The Navigator RIP is able to overcome many of the problems which have beset other interpreters and
renderers for page description languages.
RIPs have traditionally operated in a serial fashion, that is, the RIP processes a page of the PDL and
then outputs it, then processes the next page and outputs it, and so on.
The Navigator RIP can operate in this manner. This approach to processing (which includes both
interpreting and rendering) and output is usually adequate with low to medium resolution devices.
However, with higher resolution devices this approach becomes wasteful, because periods are spent
with the output unit idle while the RIP is working, and then with the RIP idle while the output unit is
working. The RIP allows you to overlap processing and output for greater throughput.
Also, if you need to change cassettes or deal with a printer fault or media jam, most RIPs must wait
until the fault is cleared before they can output the current page and continue. If you are processing a
long job and a fault occurs, it must be reinterpreted once the fault has been detected. For an overnight
job, the fault will probably not be detected until the morning, in which case a lot of time will have
been wasted.
The Navigator RIP overcomes these limitations by allowing you to choose one of four different modes
of operation.

4.2 Page buffering modes
Depending on the job involved, and the configuration of your hardware, you can choose whichever
mode is most suitable and overcome many of the problems described above.
There are two general methods of operation in the RIP; multiple and single. Multiple modes allow you
to write each interpreted page to disk, ready for later printing and reprinting. Single modes only interpret one page before printing must occur (and hence make the RIP operate in a more traditional manner).

Navigator RIP version 9

User Manual

57

Navigator RIP Output Methods

The four specific modes are: Single, Single (if required), Multiple, and Multiple (Parallel). Table 4.1
introduces and compares these modes.
Table 4.1 Comparison of page buffer modes
Mode
Single (if required)

Behavior
Only buffers a page to disk if the page is too complex to
process in working memory‚ deletes this buffer after
printing.
Otherwise, sends output directly to the output device.

Single

Always buffers a page to disk before printing it.
Deletes the page after printing.

Multiple

Always buffers a page to disk before printing it.
Retains on disk all pages created for a job, for ease of
reprinting.

Multiple (Parallel)

Always buffers a page to disk before printing it
Retains on disk all pages created for a job, for ease of
reprinting.
Sends interpreted pages to the output device while interpreting other pages at the same time.

Note: For normal use, you should use Multiple (Parallel) mode. This gives the best overall performance from the RIP and the best control over every page processed. The RIP uses this mode by
default.
Refer to Chapter 7, Configuring the RIP, for details of how to select different page buffering modes in
the RIP.

4.2.1 Page buffering modes for the headless RIP
When run as a headless RIP the page buffering mode is automatically changed to Single (if required).
From Navigator v7.1 the page buffering mode can be changed from Single (if required) to one of the
other available throughput modes. This can only be done programatically using a PostScript language
file or via the SOAR interface.

4.2.2 Operating modes
Figure 4.1 presents an overview of the behavior of the Navigator RIP in the single and multiple
modes.

58

User Manual

Navigator RIP version 9

4.3

The throughput system

When the RIP is in either of the single modes, it sends each page straight to the output device once it
has been interpreted. If the RIP buffers a page to disk, that page buffer is deleted once the page has
been printed.

Single Modes

Multiple Modes
Interpreter

Interpreter
....../manualfeed
exch def
/paperheight
exch def

....../manualfeed
exch def
/paperheight
exch def

Jobs

Jobs
Page buffer
file
Page buffer
files

Output device

Output device

Figure 4.1 How the Navigator RIP behaves in Single and Multiple Modes

When in one of the multiple modes, pages are always buffered, and they are not usually deleted (until
disk space is required for new pages) so they can be reprinted at a later point. The throughput system
tools can be used to oversee printing allowing a range of benefits, which are described below. See The
throughput system on page 59.
Note also that when in Multiple (Parallel) mode, interpretation can take place at the same time as outputting an earlier page to a printer or imagesetter, but this is not true of either of the single modes. This
is not illustrated in the diagram.
Even though the increase in job throughput is significant when in Multiple (Parallel) mode, there may
be cases usually because of hardware limitations when you will need to use one of the other modes
provided. For example, you may not have enough disk space to store any page buffers, or the combination of a slow disk and an output device with a high data rate may mean that working in Multiple
(Parallel) mode becomes impractical. See The throughput system on page 59 for more details.

4.3 The throughput system
This section describes the Output Controller, which is the central part of the throughput system, and
discusses how it can be used to increase throughput. The Output Controller is available when either of
the multiple modes is selected (see Control of page buffering modes on page 179, for details on how to
change the page buffer mode).

Navigator RIP version 9

User Manual

59

Navigator RIP Output Methods

The Output Controller gives you powerful facilities for controlling any jobs output by the RIP. These
include:


Reprinting without reinterpreting the original page description.



Changing the order of the pages to be printed.



Control over a variety of page characteristics without reinterpreting the page description.



Aborting any page before it is completely printed.

4.3.1 Output Controller
To display the Output Controller (if it is not already displayed), select Output Controller from the Output menu, or type Ctrl+O. It will appear as a separate window on your screen, as shown in Figure 4.2.
If you want to remove it, choose the menu option again. By default, the Output Controller is displayed
when you start up the RIP.

Figure 4.2 Output Controller / Monitor dialog box

4.3.1.1 The Active Queue and Held Queue
The Active Queue and Held Queue in the Output Controller can contain a number of items, each representing a page of output.
The Active Queue contains pages which are currently queued for printing. Pages listed at the top of the
Active Queue will be printed first.
The Held Queue contains pages which are being held on your hard disk. They may have already been
printed, or you may have moved them there yourself. (See Moving page buffers on page 61).
The number of items in a queue, together with the amount of disk space they use, is displayed below
each queue.
If a page is currently being printed, it is shown in the box at the top of the Output Controller between
the Active Queue and Held Queue.
As pages are printed, there is a constant flow from the Active Queue to the Held Queue. After a page has
been interpreted, it will be placed at the end of the Active Queue, printed in its turn, and then trans-

60

User Manual

Navigator RIP version 9

4.3

The throughput system

ferred to the Held Queue where it will be retained until disk space is needed for new pages, when it will
be automatically deleted. This is illustrated in Figure 4.3.

4. Print page buffer
3. Place page buffer in 
Active Queue

5. Retain page buffer in
Held Queue

2. Interpret job
1. Issue print command

Figure 4.3 Flow of a page buffer between the active and held queues

4.3.1.2 Interrupting output
The Disable output check box can be used at any time to stop printing. When it is selected, pages will
remain in the Active Queue until you clear the check box to resume the printing.
Disable output does not stop the current page printing, if there is one. To stop a page while it is printing,
drag the page name from the top box into the Held Queue or Active Queue.

If pages are interpreted while output is disabled, the new pages created are added to the Active Queue
as normal. Disabling output does not prevent you from processing jobs.
You will find Disable output useful if you need to renew the media in an output device, or if there is a
fault on a device, but you wish to continue interpreting and preparing more pages for output.
The RIP automatically disables output when certain errors occur, for example if a device determines
that the wrong cassette is mounted.

4.3.1.3 Moving page buffers
You can move any of the pages shown in the Output Controller between the Active Queue and Held
Queue by selecting and moving them with the mouse.
To move a page buffer, do the following:
1. Select the desired file.
2. Holding down the left mouse button, drag the file between the queues.
The selected page will move with the mouse pointer and enter the list at the position where you release
the mouse button.

Navigator RIP version 9

User Manual

61

Navigator RIP Output Methods



Shift


If you wish, you can move a block of several pages at once. To select a block, select the first one, then
hold down the Shift key and select the last one.


Ctrl


You can also select several page buffers which do not form a contiguous block. Hold down the Control
key while selecting the page buffers.
You can reprint or abort a job, or reorder the pages in the queue, easily and quickly, by moving the
pages between the queues, as follows:


To reprint a page, move it from the Held Queue to the Active Queue.



To stop a page before it is printed, move it from the Active Queue to the Held Queue.






To abort the page that is currently being printed, move it from the box between the queues to
the Held Queue.
To change the order of the pages in a queue, move them within the queue.
If you are moving a lot of pages at once, disable output first to ensure that none of them are
inadvertently printed before you are able to move them.

4.3.1.4 Page buffer information
Information about each page is displayed in the Active Queue and Held Queue. Refer to Figure 4.2 on
page page 60 to see examples of this. The following items of information are displayed:


The delete permission for each page.



Whether or not the page was created by an older version of the RIP.



The page number of the original job.



The original job name.



The color for printing the page.

The delete permission for (or origin of) each page
You can configure the RIP so that it automatically deletes pages once they have been printed, or when
space on the hard disk is low. However, you can still retain an important page by changing its delete
permission. See Deleting buffered pages on page 64, for details on deleting pages automatically, and
Operations on buffered pages on page 65, for details on retaining important pages.
The mark, if any, to the left of each page in the Active Queue and Held Queue indicates its delete permission.
The page is locked and cannot be deleted automatically
The page is unlocked and can be deleted automatically
The page was created in an earlier version of the Navigator RIP

62

User Manual

Navigator RIP version 9

4.3

The throughput system

Note: The mark ( < ) in front of the name of an older buffer is there to remind you that there are some
limitations on what you can do with earlier versions of page buffers: see Page buffers produced by
older versions of the Navigator RIP on page 69 for details.
The page number of the original job
The page number of the original job from which the page buffer comes is displayed on the right of the
delete permission.
For example, if you are producing separated CMYK color, the RIP produces four monochrome pages
for each original page of the job. The first four pages represent the Cyan, Magenta, Yellow, and Black
separations for the original page 1. The next four represent the CMYK separations for the original
page 2, and so on. Separated pages produce pages with the original number labeled by color. Thus the
four separations for page 1 are called 1. Jobname (C), 1. Jobname (M), and so on.
If you only print a range of pages from a document, they are labeled in the original job from 1
upwards, rather than with the true page number in the document. For example, pages 3 through 7 of a
document are labeled from 1 through 5 in the job.
The original job name
The name to the right of the page number is the job name. This is not necessarily the same as the file
name of the job.
If the job name for a PostScript language job is not specified in the page description, then one of the
following will apply:


If the input came from a file, the file name will be used.



If the input came from the Executive, then the value of %exec% will be used.



If the input came from an AppleTalk network, then the value of %ip:atalkname% will be used.
The atalkname is the AppleTalk printer it came from.

For other types of jobs, the file name will be used.
The color for printing the page
Color separation pages in the Output Controller are labeled with their separation name (for example:
C, M, Y, or K; or the spot color name), or Composite if there are several colors on one page, for example
when using the PackDrum page feature. (PackDrum is intended for use with drum imagesetters, and it is
an example so you must add it before use, as described in Features on page 133.)

4.3.1.5 Monitoring progress
The Output Controller can be used to monitor the progress of each page as it is printed: the large box
between the two queues gives you an indication of the progress of the job. As soon as a buffer begins
to print, the shape of this progress box changes to reflect the aspect ratio of the page. For instance, if it
is a portrait page, the box will have greater height than width, and if it is a landscape page, it will be
wider than it is high.

Navigator RIP version 9

User Manual

63

Navigator RIP Output Methods

As the page is printed, the box starts to fill from the top with a light gray pattern, followed by dark
gray. Figure 4.2, page 60, shows this happening.








The amount of dark gray in the progress box indicates the proportion of the job that has already
been printed.
The amount of light gray in the progress box indicates the proportion of data currently in the
printer buffer, waiting to be printed.
The amount of white space in the progress box indicates the proportion of data not yet printed
and not yet buffered.
When the progress box is completely filled with dark gray, the page has finished printing,
though margins and extra feeds may require a few more seconds.

In addition, the time taken for the current page buffer is displayed in the message area below the
progress box.
Some printers may also buffer the data internally, so they may not start printing until some or all of the
data has been received.
The message area and the progress box are both used to display additional information when problems
arise. For example, if your printer becomes low on media, an icon will be displayed in the progress
box, together with an appropriate status message. See Appendix A, Troubleshooting, for a full
description of these error messages.
Note: In either of the single modes, the Output Controller is not available and the progress box
appears in a separate window.

4.3.2 Job management
The Output Controller gives you control over a variety of page attributes. Using the Output Controller
you can for example:


Ensure that certain pages will never be automatically deleted.



Specify the number of copies of any page to print.



Change individual page characteristics without having to interpret the job again.

There are two general methods of controlling these attributes: configuring the RIP so that it carries out
certain tasks automatically, and changing them yourself.

4.3.2.1 Deleting buffered pages
When the RIP is in either of the multiple page buffering modes, pages are kept buffered on disk. When
the hard disk fills up, however, there is no room for new pages, and so the RIP cannot interpret any
further jobs. To proceed, the RIP deletes some existing pages to make room for new ones.

64

User Manual

Navigator RIP version 9

4.3

The throughput system

The drop-down list labeled Delete in the Output Controller lets you specify one of three strategies to
follow. Choose whichever option you prefer.






The default strategy is When necessary. As disk space is required for new page buffers, the
oldest ones will automatically be deleted from the Held Queue. Pages which have been locked
will not be deleted. (See Locking important pages on page 67, for details of how to lock pages.)
The amount of hard disk space currently available is displayed at the bottom of the Output
Controller, so you can tell when old page buffers are likely to be deleted. (The number displayed does not include any space you have reserved for the system, see Chapter 7, Configuring the RIP).
Choosing Always will cause pages to be deleted immediately after they have been output. This
means that page buffers will never be retained for reprinting, unless they have been locked
before printing was completed. (See Locking important pages on page 67, for details of how to
lock pages.) When switching to Always from another strategy, any unlocked pages in the Held
Queue will be automatically deleted if you answer yes to a prompt.
Choosing Never will cause pages to be locked as soon as they have been output, which means
that they will never be deleted automatically. If this strategy is used for long periods of time,
the hard disk will eventually fill up, and no more jobs will be processed until you manually
remove pages or otherwise create more disk space.

Note: The option When necessary offers a good way to retain newer page buffers and manage disk
space automatically. If you choose Never or Always for some special purpose, we strongly suggest that
you return the setting to When necessary as soon as possible‚ the RIP remembers and uses the option
you choose for Delete, even between RIP sessions.
In When necessary and Always modes, it is possible for the RIP to get so far ahead of the output device
that the disk becomes filled with pages in the Active Queue. In this case, the RIP will temporarily suspend creating more pages until some of the existing ones are output and can be deleted to allow it to
continue. The Navigator RIP window displays a message warning that the system has temporarily run
out of disk space.
If disk space runs out when there are no pages that can be removed and no pages still to be output, the
RIP will continue anyway, and if the disk reserve is used up then it will abort the job.

4.3.2.2 Operations on buffered pages
There are a number of useful tasks that you can perform on buffered pages, as listed below. Some of
the options are only available for pages which are not currently being output or when no pages are
being output.
Using the lists of page buffers, and the Roam button, you can:


View pages on the screen.



Select several color separations and view them on the screen.

Using the Info button and the Info dialog box, you can:


Lock and delete page buffers.



Print multiple copies of page buffers.

Navigator RIP version 9

User Manual

65

Navigator RIP Output Methods



Change a page to print in negative or vice versa.



Change the exposure with which page buffers are printed.



Trim excess white space from the output.



Select the output device and cassette for page buffers (when appropriate).



Set margins and center the page on the media (when appropriate).



Change the colors used to Roam page buffers.

You can apply these changes to the selected page only, or to all the pages of a job.
These options are available in the Info dialog box. (Some options can be unavailable: either temporarily while you are Roaming a related page buffer or permanently because the output plugin requires
particular settings.) Display the Info dialog box by selecting a page and pressing the Info button, or by
double-clicking on the page.
Note: The mark ( < ) in front of the name of an older buffer is there to remind you that there are some
limitations on what you can do with earlier versions of page buffers: see Page buffers produced by
older versions of the Navigator RIP on page 69 for details.

4.3.2.3 Viewing pages with the Roam function
You can view one page or several pages or separations at the same time.
By selecting one page buffer and clicking Roam, you can preview the selected page. This prevents
wasted film and time by letting you check that an image has processed correctly before it is printed.
While roaming a page, the RIP is still able to process other jobs, but not to output them. You cannot
roam a page while the RIP is outputting, so you should disable output when using Roam.
To roam more than one page at once, select all the pages you wish to view and click Roam; the
selected pages will be overlaid in the Roam window. For example, this allows you to preview all separations of a color image together. Remember, you can select several buffers using the Shift and
Control keys.
When viewing a higher resolution image, the Roam > Reduced Roam menu option is probably available. It allows you to see more of the image in one view. You must close the Roam window (and the
Reduced Roam window if you opened it) before you can roam another page.
For more details about the Roam function see Roam and Preview windows on page 84.

66

User Manual

Navigator RIP version 9

4.3

The throughput system

4.3.2.4 Locking important pages
To lock a page buffer so that it is not deleted by the RIP when disk space is low, select the Don’t delete
page check box in the Info dialog box. Page buffers which have been locked in this way are displayed
in the Output Controller with a mark on the left of the job name, as described on page page 62.

Figure 4.4 Info dialog box

You can delete any buffers from the hard disk‚ whether locked or not‚ by selecting them and clicking
on the Remove button in the Output Controller. A warning dialog box appears which lets you cancel
the operation if necessary.

4.3.2.5 Printing multiple copies
Multiple copies of any page buffer can be printed by specifying the number of copies required in the
Copies to print text box of the Info dialog box for the appropriate page buffer. The next time that buffer
is printed, the specified number of copies will be produced, with the number in the Copies to print text
box reducing with each copy until the value is 1. The Copies printed value keeps count of how many
pages have been printed in total.

4.3.2.6 Printing in negative
You can produce a negative copy of a positive page buffer or a positive copy of a negative page buffer
by selecting the Negative check box in the Info dialog box. The default value taken by this option is the
one specified in the Page Setup for the selected job; for instance, if the Page Setup specifies negative
printing, you can use this option to produce a positive copy. See Chapter 5, Configuring Output Formats, for details of Page Setups and how they are defined.
Note: If you have calibrated your output device, selecting this option from the Info dialog box may
produce incorrectly calibrated output. If so, select the Negative option in the Edit Page Setup dialog
box instead, and output the job again.

4.3.2.7 Trimming blank space
You can trim white space from the top and bottom of a page by selecting the Trim page check box in
the Info dialog box. The default trim page setting is specified in the Page Setup for the selected job.
See Other options that save media on page 119, for details. Trim page is switched off as a default.

Navigator RIP version 9

User Manual

67

Navigator RIP Output Methods

4.3.2.8 Changing the output device or cassette
You can change the selected output device or cassette for a page by choosing the one you want in the
Output device or Cassette drop-down lists of the Info dialog box. Next time the page is printed, the new
output device or cassette will be used. The default value taken by these options is the one specified in
the Page Setup for the selected job. See Chapter 5, Configuring Output Formats, for details.
Only output devices suitable for the page buffer are shown in the Info dialog box.

4.3.2.9 Changing the exposure
If an appropriate output device is selected, you can change the exposure for the selected page. Type in
the new value in the Exposure text box of the Info dialog box. Next time the buffer is printed, the new
exposure value will be used. You should consult the documentation for your output device to find
appropriate exposure values, and also see Chapter 12, Calibration.

4.3.2.10 Changing the color
You can specify the color of a job separation to roam from the Info dialog box. Click the Change roam
color button to use the Change Roam Color dialog box, as described in Changing the color in Roam on
page 367.
When roaming color images, this lets you assign different colors to different separations and view the
resulting image without having to interpret the job again.

4.3.2.11 Specifying page layout
You can change a variety of margin settings for a page buffer by clicking Page layout in the Info dialog
box. The Page Layout dialog box will then be displayed, as shown in Figure 4.5. It is the same as the
Page Layout dialog box that you can display by clicking Page layout in the Edit Page Setup dialog box,
as described in Default page size on page 120.

68

User Manual

Navigator RIP version 9

4.3

The throughput system

Figure 4.5 Page Layout dialog box

This dialog box allows you to change the margins for the selected page buffer. Type the margin size
you want into the appropriate text boxes. You can choose the units of measurement you require from
the Select units drop-down list. In addition, you can center the selected page on the media by clicking
on the Center page on Media Width and Center page on Media Length check boxes. The default value for
each option is taken from the Page Setup for the selected page buffer. If you override any of these values, they will take effect next time you print the page buffer.
Some of the fields in the Info dialog box may not be editable, depending on the type of device.
Note: When Centre page on Media Length and Centre Page on Media Height are enabled the left and top
margin values are set to zero. In other words, the RIP does not clip when those options are turned on.
The page buffer ignores the margin when the centre options are turned on.

4.3.2.12 Changing attributes for the whole job
Each of the options described above only affects the selected page buffer. However, many jobs consist
of more than one page, and very often you will want to make the same changes to all of the page buffers produced by the job, not just one. Making changes to each buffer individually can be tedious, if not
impractical, so an option is available which allows you to change all the page buffers produced by a
job at once.
To propagate changes in the current page to all other pages produced by the job, make your changes
for one page buffer then select the Change all pages in job check box in the Info dialog box before clicking OK to close the dialog box. This change affects pages in both queues. If the current page is from a
job currently being processed and pages are still being created, the new pages will get the new
attributes if this option is selected.

4.3.3 Page buffers produced by older versions of the Navigator RIP
The Navigator RIP can read and print page buffers created by older versions of the RIP. The newer
installation of the RIP must have an output device that matches the output device used to create the
page buffers. There are some limitations on what you can do with earlier versions of page buffers,
depending on the way in which you access the older page buffers.
There are several ways to use older page buffers with a newer version of the RIP:


You can copy the older page buffers into a special transfer folder used only for that purpose by
the newer version of the RIP. This is the safest method because it avoids any interaction
between the two versions of the RIP, but it uses more disk space and requires you to manage
two page buffer folders in the newer version. Choose Navigator RIP > Configure RIP, then click
Change to change the folder used to hold page buffers.

Navigator RIP version 9

User Manual

69

Navigator RIP Output Methods



You can copy the older page buffers directly into the page buffer folder used by the newer version of the RIP. You may need to restart that version of the RIP before the RIP displays the
page buffers.
Warning: Take care not to copy page buffers with the same file names as ones already in the
destination folder.



You can leave the page buffers in the page buffers folder of the older version of the RIP. In the
newer RIP version, choose Navigator RIP > Configure RIP, then click Change to change the
folder used to hold page buffers.
Note: If you use Reduced Roam on a page first in the newer version of the RIP, this prevents
you using Reduced Roam on that page in the same folder when using the older version of the
RIP.

You can inspect the information displayed in the Info or Page Layout dialog boxes for an older page
buffer but you cannot change anything. The main consequences are that you cannot change the number of copies to be printed and you cannot change the permission for automatic deletion.
You can Roam older page buffers without any problems beyond a small color change, which is most
pronounced in continuous tone, unscreened page buffers.

4.4 Advanced details of page buffering modes
This section gives more details about each page buffer mode. As mentioned earlier, you should use
Multiple (Parallel) mode whenever possible, but if this proves difficult, you can specify a different
mode in the Configure RIP dialog box, described in Chapter 7, Configuring the RIP.
Recall that a page is buffered to disk into a file of rasterized data, produced as the RIP interprets the
data on the page. When the page has been interpreted, the data in the buffer file is sent to the output
device and printed.
Using buffers on disk means that complex pages can be interpreted without requiring large amounts of
working memory.
This section provides more specific details than the brief description in Page buffering modes on page
57. You may find this section useful if you wish to experiment with running the RIP in different
modes.

4.4.1 Multiple (Parallel) mode
Multiple (Parallel) mode is a highly efficient way of increasing throughput, utilizing your computer to
the full, and is the recommended mode for most cases. However, if you have an output device that can
stop / start, you may want to use the Single (if required) mode, especially if the data rate of the printer
is high.
Interpretation of pages can proceed while other, already interpreted, pages are being output. In addition, multiple page buffers are created and saved on disk in this mode. These are not deleted after the
pages have been output, allowing pages to be reprinted whenever necessary. This is extremely useful
if a problem such as a developer jam occurs with the output device.

70

User Manual

Navigator RIP version 9

4.4

Advanced details of page buffering modes

All the available processor time on your machine is used in this mode priority goes to the task of sending bitmap data to the output device, and any processor time not used in that way can be used to interpret the next page of data.
It is possible for several pages to have been written to disk, but not yet sent to the output device. This
may occur if there are pages which are quick to interpret, or if the printer is relatively slow or is not
ready.
Eventually, of course, this will fill up the hard disk. When this happens, interpretation is suspended
until enough pages have been output and deleted, or disk space has been freed up by another application. When the disk fills up, the Navigator RIP window displays this message:
System warning: Insufficient Disk Space

In Multiple (Parallel) mode, you can customize the RIP so that when disk space runs out, it automatically deletes pages which have been output. See Deleting buffered pages on page 64 for details.

4.4.2 Multiple mode
In Multiple mode, like Multiple (Parallel) mode, page buffers are kept on disk. (This is in contrast to
the single modes, where only one page can be held on disk at a time.) Before reprinting, the Output
Controller can be used to change many characteristics of the interpreted pages, meaning that time is
not wasted in interpreting jobs again.
As in Multiple (Parallel) mode, it is possible that the hard disk will become full you should ensure that
page buffers are deleted when necessary to free up disk space. You can let the RIP delete pages for
you, preserving important pages which you do not want deleted, or you can delete page buffers yourself whenever you want.
The main difference between this Multiple mode and Multiple (Parallel) mode is that interpreted
pages cannot be output while other pages are being interpreted.
In Multiple mode, when a page is ready, interpretation is suspended until it has been output, in a similar fashion to the way the single modes operate. The advantage of Multiple mode over either of the
single modes is that, because multiple page buffers can be written to disk, interpretation can continue
even if the output device is not ready to accept data (for instance, if there is a media jam or if it has
been turned off).
Multiple mode should be used if you experience a lot of data underrun in Multiple (Parallel) mode.
This is only likely to happen with very complex jobs or an output device that requires data to be supplied at a very high speed.
Note: Data underrun occurs when an output device does not receive data to print at a fast enough rate.
Some devices will signal an error and stop when this occurs. Others may continue to feed through
media with the consequence that large bands will appear in the output. Still others will attempt to stop
and restart. This may result in a loss in quality of the image, and in any case is likely to be slower. For
more information about using the Navigator RIP with such printers, see Using a printer that can stop /
start on page 180. See also Printer buffer size on page 184.

Navigator RIP version 9

User Manual

71

Navigator RIP Output Methods

4.4.3 Single mode
When running in this mode, the RIP interprets a page of a job and sends it to the output device, then
interprets the next page and sends it, and so on, until all the jobs specified have been printed.
Note: To run successfully in Single mode, as in Multiple mode, it is important that the RIP can send
data to the output device as quickly as the output device requires it.
In this mode, the RIP always creates a single page buffer, sends the data in it to the output device, and
then deletes the page buffer to make room for the next one. This means that you cannot use the
throughput system tools.
By default, if a data underrun occurs and data cannot be read from the page buffer fast enough to keep
up with the printer, the RIP tries once more to output the page and, if it still fails, aborts the job.
Note: The RIP does not display the Output Controller/Monitor in Single mode and Single (if required)
mode.
In this mode, the Output menu, on the main Navigator RIP window, contains a Hold and Reprint
option. (You can also select this option by pressing Ctrl+H.) Selecting this option allows you to choose
whether or not to reprint each following page without having to reinterpret it. This can be used to print
more copies of a page.
When you have selected the Hold and Reprint option, the RIP displays a dialog box at the end of processing each page asking if you want to reprint the page. You can answer: Yes, in which case the RIP
reprints the page and re-displays the dialog box; or No, in which case the RIP deletes the page buffer
and interprets the next page.
Note: As a side effect of using Hold and Reprint, the RIP displays a harmless error message in the
Navigator RIP window:
%%[PrinterError: re-print for hold and re-print]%%

4.4.4 Single (if required) mode
This mode is similar to Single mode, except that a single page buffer will be created only when it is
necessary. The RIP will attempt to output a page to the printer without using a page buffer at all, but
will create one in either of the following cases:




It is not possible to interpret the page quickly enough to keep up with the printer, and the
printer does not have a stop and restart function.
All the available working memory on your computer has been filled by interpreted data before
the page has been completed.

In the second case, the interpreted data is placed in a page buffer, thus freeing memory. More data is
interpreted, and when memory is exhausted again the data is merged into the original page buffer, and
memory is again available to continue the job. This process continues until all the data for the page has
been interpreted, at which point the data in the page buffer is sent to the chosen output device, as for
Single mode.
This mode is very productive but robust where there is an unpredictable mix of simple and complex
jobs, and is especially useful when most jobs are relatively simple. It is productive because the RIP

72

User Manual

Navigator RIP version 9

4.5

Page buffering modes: a summary

processes the simple jobs without creating disk buffers and achieves maximum throughput for these
jobs. It is robust because, when a job is complex enough to require buffering, the RIP creates and then
sends the page buffer: this takes some extra time but the time is taken only when required.
In some cases, Single (if required) mode provides the quickest way to output a job.
The Output menu on the main Navigator RIP window, contains a Hold and Reprint option, as described
for Single mode.

4.4.5 Multiple (Parallel) compared to Single (if required) mode
The preferred mode for maximum performance and convenience is Multiple (Parallel) mode. The Single and Multiple modes will always be slower than Multiple (Parallel) mode: they are available only
to help you cope with very demanding output devices that are not able to stop/start, when there is very
little memory to use as a printer buffer.
However, in some circumstances, it is possible that the Single (if required) mode will be faster than
Multiple (Parallel) mode. This is because the bitmap of an output page does not need to be compressed, written to disk, read back from disk and decompressed again, before being printed. If you run
in Multiple (Parallel) mode, and the page buffer folder is on a RAM disk, the disk time required is
minimal, but you still have to compress and decompress the page. It is a question of speed versus convenience. Multiple (Parallel) mode offers much greater convenience, and will usually also offer the
best performance.
However, you should use Single (if required) mode if you are either only outputting a single page, (so
there can be no benefit from the overlapping of outputting and interpreting) or if the time to compress
and decompress the page to and from disk is large. This is true, for example, of the Seybold Rainbow
Islands test job, where 30% time savings are possible if Single (if required) mode is used at 2400 dpi.
¬Æ

The main problem with Single (if required) mode is that if the job is too complex, then the printer will
catch up, a paint to disk will be necessary, and the page output again: wasting the time spent on the
failed page and some media.
Another potential inefficiency of Single (if required) mode is that if the page is relatively simple, a lot
of processing time is wasted when the page is outputting, which could be used to get the next page
ready (as happens in Multiple (Parallel) mode).

4.5 Page buffering modes: a summary
The table below provides a summary of the major capabilities of each page buffering mode.
Single (if
required)

Single

Multiple

Multiple
(Parallel)

Ever create a page buffer?

Y

Y

Y

Y

Always create a page buffer?

N

Y

Y

Y

Will the Navigator RIP‚¶

Table 4.2 Summary of the capabilities of each page buffering mode

Navigator RIP version 9

User Manual

73

Navigator RIP Output Methods

Single (if
required)

Single

Multiple

Multiple
(Parallel)

Ever create more than one page
buffer?

N

N

Y

Y

Retain any page buffers on disk?

N

N

Y

Y

Always output as soon as a page
is ready?

Y

Y

Y

Y

Always stop interpreting while
outputting?

Y

Y

Y

N

Interpret pages while outputting
other pages?

N

N

N

Y

Allow pages to be output again?

Y

Y

Y

Y

Allow modification of page
buffer settings without
reinterpretation?

N

N

Y

Y

Allow previewing the page?

N

N

Y

Y

Will the Navigator RIP‚¶

Table 4.2 Summary of the capabilities of each page buffering mode (Continued)

74

User Manual

Navigator RIP version 9

5
Configuring Output Formats
Chapter 3, Getting Started with the Navigator RIP, presented some of the basic ways of getting output
from the RIP. That chapter introduced the Page Setup Manager and Edit Page Setup dialog box and
showed how you can use Page Setups to choose the output device and many output options.
This chapter describes the details of these dialog boxes and discusses likely output devices.

5.1 Creating and managing Page Setups
Every job that you supply to the RIP takes its imaging options from a named Page Setup. This is true
both for jobs arriving through a managed network input defined in the Input Controller, and for jobs
that are the result of you choosing a menu option in the RIP, for example: Proof Fonts or Print File.
(These menu options can be a useful way to test new Page Setups.)
You can keep a number of different Page Setups which you use regularly‚ perhaps one that has Harlequin Precision Screening (HPS) turned on, and one that does not, one that previews images, and one
that sends output to a particular printer. You can save as many configurations as you wish.
Page Setups are such an important part of the RIP that you must name each one as you create and save
it. You can use up to 30 characters in a name. It is useful to give each Page Setup a meaningful name,
without being too specific about its contents.


Choose a meaningful name because the Page Setup name appears in several menus where you
have to choose a Page Setup. Also, for each job, the RIP displays a message in the RIP Monitor
saying which Page Setup it used.
Choose a form of name that suits the variety of jobs and output devices that you work with.
Consider making the name contain parts indicating the output device, and settings such as resolution. Another tactic might be to label a Page Setup with its general purpose, for example:
proofing or final output.



Try not to be too specific because you can change the settings within a Page Setup without
changing its name.
For example, this can be useful if you change the device you use for proofing. If you have several networked inputs that each use the same Page Setup, it is easier to edit just one Page Setup
than to create a new Page Setup and then change all the inputs to use the new Page Setup.

You can give an experimental Page Setup a less carefully chosen name, but try to make it clear that it
is not for routine use.

Navigator RIP version 9

User Manual

75

Configuring Output Formats

5.2 Page Setup Manager dialog box
The Page Setup Manager dialog box appears when you choose Page Setup Manager from the Navigator
RIP menu, or when you type Ctrl+S. (You must stop inputs before you can display the Page Setup
Manager: if necessary, choose the Navigator RIP > Start Inputs menu option or click the tool bar button
that shows a red arrow and traffic lights.)

Figure 5.1 Page Setup Manager dialog

The Page Setup Manager contains a list of all existing Page Setups, showing the name of each Page
Setup, the corresponding output device and some important settings: the output resolution, the calibration set in use, and the separations style.
In a new installation of the RIP, there is always one Page Setup called Default Page Setup. This
Page Setup uses a set of options that can be expected to work with any installation of the RIP, producing a low-resolution on-screen preview. You can delete or redefine this Page Setup to suit your installation.

5.2.1 Controls and actions
The controls below the list allow you to create new Page Setups, and to edit, copy, or delete existing
Page Setups. You can also choose the units in which to view the resolution of output listed for each
Page Setup.
Select a Page Setup and click this button to edit it in the Edit Page Setup dialog box. A shortcut is to double-click a Page Setup. See Edit Page Setup dialog box on page 77 for details of using this dialog box.

Edit

Note: To rename a Page Setup, copy it and save the copy with the desired
name, before deleting the original.

76

New

Click this button to create a new Page Setup and edit it in the New Page Setup
dialog box. See Edit Page Setup dialog box on page 77 for details of using
this dialog box.

Copy

Select a Page Setup and click this button to edit a copy in the New Page Setup
dialog box.

User Manual

Navigator RIP version 9

5.3

Delete

Edit Page Setup dialog box

Select one or more Page Setups and click this button to delete them.
If any of the Page Setups are in use by a managed input, the RIP displays a
warning dialog box for each used Page Setup. Click Yes if you are certain that
you want to delete the Page Setup.

5.2.2 Reordering Page Setups
You can also select Page Setups and reorder them by dragging them to new positions in the list. The
order in the Page Setup Manager is the order of the Page Setups listed in the Print File, Proof Fonts,
and Print Calibration dialog boxes and in the Select Page Setup dialog box shown before entry to the
Executive window.

5.2.3 Selecting several Page Setups
You can select multiple Page Setups when you want to delete or reorder them. Use the following keys:


Shift


To select a block of setups that appear together in the list, select the first setup in the block, then, while
holding down the Shift key, select the last setup in the block.


Ctrl


To select several setups, regardless of whether they form a continuous range, hold down the Control
key while selecting the setups you wish to delete.

5.2.4 Closing the Page Setup Manager
You must close the Page Setup Manager before you can use any tool bar buttons or menu options in
the RIP: for example, to start inputs.
You have these choices:




Click OK to confirm all the changes you have made in the Page Setup Manager or in the Edit
Page Setup or New Page Setup dialog boxes.
Click Cancel to discard all changes.

5.3 Edit Page Setup dialog box
The Edit Page Setup dialog box (shown again in Figure 5.2) appears when you click Edit in the Page
Setup Manager. The New Page Setup dialog box appears when you click New or Copy. The New Page
Setup dialog box is the same as the Edit Page Setup dialog box, except that the OK button is labeled

Navigator RIP version 9

User Manual

77

Configuring Output Formats

Save As. See Closing the New Page Setup dialog box on page 79 for details. References to the Edit

Page Setup dialog box throughout this manual also apply to the New Page Setup dialog box.

Figure 5.2 Edit Page Setup dialog box

The options you can configure from the Edit Page Setup dialog box include:


The device to which the RIP sends output.



The separations to be created from each job, together with the output format.



The halftone screening to be used with each job.



The calibration to be applied to each job.



The color setup for the job.



The effects to be applied to input jobs.

Selecting different devices on page 80 through XPS Options on page 145 describe the options within
these categories. Many options involve subsidiary dialog boxes.

78

User Manual

Navigator RIP version 9

5.3

Edit Page Setup dialog box

All the information that you need to create a Page Setup is available from the Edit Page Setup dialog
box. You can call the Device Manager, Separations Manager, Color Setup Manager, Calibration Manager, and the Cassette Manager from the Edit Page Setup dialog box.
The changes you make in these managers are independent of the Page Setup you are creating. For
example, you can use the Separations Manager to create a separations style, even if you do not want to
use that separations style in the Page Setup.

5.3.1 Closing the Edit Page Setup dialog box
You must close the Edit Page Setup dialog box to save your changes. You must also close the Page
Setup Manager before you can use any tool bar buttons or menu options in the RIP: for example, to
start inputs.
Click OK to confirm all the changes you have made in the Edit Page Setup dialog box. This confirmation is provisional: you must also click OK in the Page Setup Manager to finally save your changes.
Alternatively, click Cancel to discard your changes immediately.
Note: If you open one of the other managers from the Edit Page Setup dialog box, changes that you
make in that manager are independent of the Edit Page Setup dialog box. For example, if you open the
Separations Manager and create a separations style, as long as you close the Edit Style and Separations Manager dialog boxes with OK or Select, the new style will remain even if you click Cancel in the
Edit Page Setup dialog box.

5.3.2 Closing the New Page Setup dialog box
You must close the New Page Setup dialog box to save your changes. You must also close the Page
Setup Manager before you can use any tool bar buttons or menu options in the RIP: for example, to
start inputs.
If you click Save As in the New Page Setup dialog box, a dialog box appears, requesting that you enter
a name for the new Page Setup. Figure 5.3 shows this dialog box.

Figure 5.3 Save Setup dialog box

The dialog box shows a list of existing Page Setups. You have these options:


Type a name in the Save As text box and click Save. The new Page Setup is added to the list in
the Page Setup Manager.

Navigator RIP version 9

User Manual

79

Configuring Output Formats





Select a name from the list of the Page Setups to transfer it to the Save As text box. You can edit
the name first or click Save immediately to overwrite the existing setup.
Click Cancel to return to the New Page Setup dialog box.

If you attempt to save a setup using an existing name, the RIP asks you to confirm the action before
overwriting the existing setup. If you answer No, you return to the Save Setup dialog box where you
can choose another name.
Once you have saved the Page Setup, you must also click OK in the Page Setup Manager to finally
save your changes.

5.4 Selecting different devices
The Device drop-down list in the Edit Page Setup dialog box allows you to specify where your output
is to be sent once the job has been interpreted.
You can send output to a physical printer, write it to a file in a specified format, or preview the file on
your screen. Although the precise configuration of available devices may vary, the following output
devices are always shipped with the evaluation copy of the RIP:






Preview enables you to preview on your monitor any jobs processed. This output device is
available in both single and multiple modes.
None does not produce any printed output, but does perform all the necessary processing for
the job, including the production of page buffers. This can be used for testing and timing jobs,
and is especially useful for previewing on screen when you want to jump between pages or
overlay separations using the Output Controller. The Output Controller is available in either of
the multiple modes.
TIFF produces TIFF (Tag Image File Format) files. Most desktop publishing applications can
import this format of file.

And, depending on which physical output devices are available:


Plugin devices, for example, Ultre, PelBox and Hewlett Packard HP650.

Note that if you change the Device, you may have to choose a separations style from the Style dropdown list and a cassette name from the Cassette drop-down list before you can save the Page Setup.

5.4.1 Setting the resolution
Under Resolution, there are two options that allow you to specify the resolution of the image to be
printed. The resolution defines the detail with which an image is printed or displayed, and is given in
terms of dots per inch (dpi).
The list of available resolutions varies between output devices. Most physical output devices support a
limited number of resolutions and you must choose from the values shown in the drop-down lists. For
some devices (such as TIFF) you can either type in a resolution or choose one of the values.
Normally the vertical and horizontal resolutions should be the same value: this is your only option
when the screening method is HDS or when the chosen output device requires the same vertical and

80

User Manual

Navigator RIP version 9

5.4

Selecting different devices

horizontal resolution. For other screening methods and with other output devices you can set the resolutions to different values if you need to.




Set both resolutions at once by defining just the vertical resolution the horizontal resolution is
automatically set to the same value.
Set different vertical and horizontal resolutions by setting first the vertical and then the horizontal resolution.

Note: The resolutions shown in this dialog box always take effect for jobs that do not specify a resolution. If the job attempts to specify the resolution, you must select the Override resolution in job check
box if you want to produce the resolution shown here.

5.4.2 Image interpolation
When an image is at a different resolution to the device on which it is to be imaged, artifacts can be
introduced with various degrading visual effects. Image Interpolation attempts to eliminate these
effects, using extra processing to effectively recreate the image specifically for the device.
Image Interpolation works both ways: reducing the resolution of the image to match an output device
with a lower resolution and increasing the resolution of an image to match an output device with a
higher resolution.

5.4.2.1 Increasing image resolution
If you input an image that has a resolution which is slightly lower (between 50%-100%) than the resolution of the output device, the resulting image appears with jaggies. Image interpolation will generally eliminate this type of problem, with very little (if any) perceptible loss of image quality.
If you input an image that has a resolution which is significantly lower (50% or less) than the resolution of the output device, the resulting image appears blocky. Image interpolation will smooth such
images giving a blurry look. If the resolution of the original image is reduced more when compared to
the output device, the output becomes more blurry.
In practice, you can still get jaggies when the image has a resolution that is significantly lower in resolution, but their effects are not as pronounced as in the slightly lower case.
It is a good idea to run some tests and decide whether or not to use image interpolation.
Image interpolation works by producing a smooth transition between adjacent sample values rather
than painting all pixels covered by a source sample with the same color.
There is a performance penalty when interpolation takes place, and this penalty is related to the area of
the output image, and to whatever color management is taking place.
Because it may increase the time required to render the image, image interpolation is disabled by
default. It is enabled when the width or height (or both) of an image on the device is larger than the
corresponding dimension of the source. If either dimension of the image on the device is less than that
of the source, the filter is deactivated.
Image interpolation takes place when the Interpolate flag in an image or mask dictionary is set to true
and this is set by the generating application, or you can force all images to be interpolated.

Navigator RIP version 9

User Manual

81

Configuring Output Formats

Note: Interpolation (image and mask) is not supported for type 4 images.
Image interpolation increases the resolution of the image to the device resolution by increasing the bit
depth of the image. For example, a 1 bit grayscale image will interpolate to, say, an 8 bit image, with a
smooth gray scale transition between each black and white pixel.
Image mask interpolation produces output that is 4 times higher in resolution than the input, but it can
run up to three times in a row, providing at most 64 (4 x 4 x 4) times higher resolution output. The
mask interpolator uses two criteria to choose if higher resolution output is needed:


If the source mask width and height are both higher than the device resolution, stop.



If either the source mask width or height are more than 150% of device resolution, stop.



Otherwise, interpolate again.

The second check is concerned with images whose source data is not square, but they have been transformed so that on the device they are close to becoming square. This is to avoid the larger side of the
image becoming very large as the smaller side tries to achieve the device resolution.

5.4.2.2 Reducing image resolution
When an image is reduced on an output device, rows and columns of the source image are discarded to
make the image fit in the desired area.
Some images are generally unaffected by this process photographs for example. However, some
images, such as technical drawings, can become badly affected. When an image contains many fine
horizontal and vertical lines they can become badly distorted or even lost completely by the process
naively discarding whole columns and rows.
The image reduction filter eliminates this kind of problem by resampling the whole image to the
device resolution, ensuring that all pixels in source image are represented on the output. Thin lines on
a white background would become more faint as the image is reduced, rather than be discarded completely.
Any reduced image may benefit from the reduction filter however images containing fine line detail
will show the most benefit.
Although some processing time is required, the reduction filter can, in some cases, speed up processing as it reduces the amount of information the RIP has to work with. In particular, large, high-resolution images being output on a relatively low-resolution device (1200 dpi image on a 300 dpi device)
may notice a speed improvement, particularly if the job is using color management.
The image reduction filter becomes active when the width or height (or both) of an image on the
device is smaller than the corresponding dimension of the source. If either dimension of the image on
the device is greater than that of the source, the filter is deactivated.

5.5 Sending output to the screen
There are two output devices that are provided for sending output to the screen: Preview and None.
None is the more flexible choice if you are running the RIP in the Multiple or Multiple (Parallel) page
buffer mode.

82

User Manual

Navigator RIP version 9

5.5

Sending output to the screen

None is a dummy device provided for test runs and for previewing, so no physical printing takes
place. You can preview the pages sent to the None device using the Roam command from the Output

Controller in the same way as you can preview the pages sent to an actual device. You can roam several pages at once if they are the same size, which allows you to view selected separations of a color
image together or to compare buffers for the same page when processed with different Page Setups.
You can also hide one or more separations when previewing a composite image. The Output Controller is only available in either of the multiple page buffer modes.
Preview is also a dummy device, and it enables you to preview individual separations, a composite
image, or selected colors of a composite image in all page buffer modes. The Preview device does
not allow you to combine pages or separations for viewing, and jobs sent to Preview do not appear in

the Output Controller.

5.5.1 Using the Preview device
By setting the output device to Preview, you can preview any jobs processed on your monitor. As a
separate output device, Preview is most useful when running in Single or Single (if required) modes,
when the Output Controller is not available. The RIP pauses all job processing while you are viewing
a page and resumes only when you close the Preview window.
When you print a file to the Preview device, a new window appears containing the image processed,
as shown in Figure 5.4.

Figure 5.4 Preview window

You have already seen an example of screen roam in Chapter 3, Getting Started with the Navigator
RIP. Using screen preview as a device gives you the same options as screen roam. You can preview up
to 24-bit RGB or 32-bit CMYK raster images, as long as you have sufficient memory. If you have
installed an N-color device, you can also roam N-color images.
Navigation in the Preview window is the same as in the Roam window. For details see Roam and Preview windows on page 84. You can hide one or more separations when previewing a composite
image. See Roam Options and Preview Options dialog boxes on page 85 for details.

Navigator RIP version 9

User Manual

83

Configuring Output Formats

5.5.2 Using the None device
When running in a multiple page buffering mode, you can preview pages from within the Output Controller by clicking the Roam button. (See Job management on page 64.) By setting the output device to
None, you can carry out test runs, and preview pages and separations.
You have already seen an example of screen roam in A simple Navigator RIP session on page 43. As
you saw in that example, when you print to the None device, you can select a page in the Held Queue
of the Output Controller and click Roam. The Roam window appears. The title bar of the Roam window contains the name of the file, the resolution and the color of the page or pages. You can view any
page in any queue of the Output Controller, not just the pages you printed to the None device.
To roam more than one page at once, select all the pages you wish to preview and click Roam; the
selected pages will be overlaid in the Roam window. For example, this allows you to preview some or
all separations of a color image together. Remember, you can select several page buffers using the
Shift and Control keys.
If you roam the separations of a color image or if you are roaming a composite image then the combined image may become difficult to interpret, particularly if any of the separations have similar colors. There are ways to reduce the complexity:




You can hide one or more separations as you are roaming the separations until all but one separations are hidden. See Roam Options and Preview Options dialog boxes on page 85 for
details.
You can choose to display a separation in any color (in the Info dialog for that separation)
before starting to roam it. See Changing the color in Roam on page 367 for details.

The Roam and Preview windows are described in detail in the following sections.

5.5.3 Roam and Preview windows
Note: This description applies to both Roam and Preview windows. For ease of description, this section refers to the Roam and Reduced Roam windows only: the same description applies to the Preview
and Reduced Preview windows except that the word Roam in menus becomes Preview.
When previewing pages, the size of the image is proportional to the resolution chosen in Edit Page
Setup: the higher the resolution, the larger the image appears. Choose a high resolution if you want to
look at a processed image in fine detail; choose a lower resolution to see the whole image at once.
When you are viewing a higher resolution image, the Roam > Reduced Roam menu option is probably
available in the Roam window. It allows you to see more of the image in one view. You must close the
Roam window (and the Reduced Roam window if you opened it) before you can roam another page.
For most sizes of page, there are horizontal and vertical scroll bars at the edges of the Roam window.
(The scroll bars appear only when the window is too small to display the whole page at one time.)
When there are scroll bars, you can use them to move your view to different parts of the page image.
Alternatively, you can drag the page image around by holding down the left mouse button when the
cursor is over the image and moving the mouse. While you are dragging the image, the shape of the
mouse cursor changes to a hand. The hand speed determines how quickly the image moves when you
move the mouse. You can set the hand speed, together with other options, in the Roam Options dialog
box. See Roam Options and Preview Options dialog boxes on page 85 for details.

84

User Manual

Navigator RIP version 9

5.5



Sending output to the screen

Shift


Hold down the Shift key to see cross hairs marking the location of the view, in proportion to the size of
the Roam window. For example, if the cross hairs are shown in the bottom right of the window, the
window contains the bottom right portion of the page. Hold down the Shift key and click the mouse
(Shift-click) to jump to another part of the page. For example, if you Shift-click on the middle of the
window, the window scrolls to show the middle of the page.

5.5.3.1 Roam Options and Preview Options dialog boxes
Note: This description applies to the options for both the Roam windows and the Preview windows.
For ease of description, this section refers to the Roam and Reduced Roam windows only: the same
description applies to the Preview and Reduced Preview windows.
Display this dialog box by choosing the Options command from the Roam menu in either the Roam
window or the Reduced Roam window.

Figure 5.5 Roam Options dialog box

The Roam Options dialog box contains a list of the separations shown in the Roam window and the
Reduced Roam window.
You can use this dialog box to choose the separations that are displayed. Select a separation, or use the
Shift or Control keys to select multiple separation names, then click one of these buttons:
On

Displays the selected separation or separations.

Off

Hides the selected separation or separations. You cannot use this button if
using it would hide all separations.

The other controls do not require a selected separation.
Color display

Navigator RIP version 9

By default, the RIP displays the page image as quickly as possible. If you
prefer a more accurate (but slower) display of colors, select Accurate from the
Color display drop-down list. (This control may be unavailable if there are
restricted display colors because of hardware limitations or display modes
chosen in the operating system.)

User Manual

85

Configuring Output Formats

Hand speed

The hand speed determines how quickly the image moves when you move
the mouse. If you find that the page image moves too quickly, you can slow
down the hand speed by selecting Medium or Slow from the Hand speed dropdown list.

Negative

The Negative option allows you to switch the Roam image from positive to
negative or vice versa. This is particularly useful for negative images allowing you to view the image as a normal positive image.

You can close the Roam Options dialog box using the Roam > Options menu option again. Alternatively, closing the Roam window will also close the Roam Options dialog box. If you do not close the
Roam Options dialog box explicitly, it will be displayed the next time you preview pages.

5.5.3.2 Reduced Roam and Reduced Preview windows
When viewing a large or high resolution image, the Roam > Reduced Roam menu option is probably
available in the Roam window. It allows you to see more of the image in one view. You must close the
Roam window (and the Reduced Roam window if you opened it) before you can roam another page.


Shift 

If you Shift-click at a particular point in the Reduced Roam window, the view in the Roam window
scrolls to center on that point on the page.


Shift


If you Shift-drag with the mouse (hold down Shift key, then press and hold the mouse button), you can
range over the part of the page which is visible in the Reduced Roam window.

5.6 Output to Preview
By setting the output device to Preview in the Edit Page Setup dialog box, you can preview any jobs
processed on your monitor. Using screen preview as a device gives you the same options as screen
roam. As well as navigating a preview of an image, you can display a reduced preview window, which
shows the same image reduced in size.
If you are running the RIP in one of the multiple modes and wish to preview jobs, you may find it useful to process those documents using None, and then preview each page buffer separately from within
the Output Controller by clicking the Roam button.
Under Separations, Screening & Color, the Style drop-down list contains all the separations styles created for the Preview device. The choice of separations style determines the color space and format of
the output.
See Sending output to the screen on page 82 for further information about the Preview and None
devices.

86

User Manual

Navigator RIP version 9

5.7

Output to None

5.7 Output to None
The None device option available in the Edit Page Setup dialog box does not produce any printed output, but it does perform all the required processing for the job, including the production of page buffers in the appropriate modes. This can be used for testing and timing jobs, and is especially useful for
previewing on screen when you want to jump between pages or overlay separations using the Output
Controller.
Under Separations, Screening & Color, the Style drop-down list contains all the separations styles created for the None device. The choice of separations style determines the color space and format of the
output.
Note: The Output Controller is only available in either of the multiple modes. You can preview a page
in one of the single modes by setting the output device to Preview instead of None.
See Sending output to the screen on page 82 for further information about the Preview and None
devices.

5.8 Output to TIFF
The Navigator RIP can produce TIFF (Tag Image File Format) files, which you can choose by selecting the TIFF output device in the Edit Page Setup dialog box. Most desktop publishing applications
can import this format of file.
The Navigator RIP produces TIFF files which are compatible with TIFF 5.0, Classes B (bilevel), G
(gray scale), and R (RGB color). CMYK color separations are also supported as defined in the published TIFF 6.0 specification, Appendix K.
Note: From Eclipse Release SP4, if a TIFF file of 4GB or more is produced the output will abort, and
a File size overflow message will appear.
Under Separations, Screening & Color, the Style drop-down list contains all the separations styles created for the TIFF device. The choice of separations style determines the color space and format of the
output.
Note: The TIFF file is complete when it appears in the file system with the name requested by the
user, primarily to ease any subsequent, automatic processing of the file. (To make this possible, the
RIP produces, and then removes, an intermediate file with the suffix .TMP , or the suffix .TEM if the
requested name has extension .TMP .)
You can configure how the RIP produces and names TIFF files by clicking Configure Device in the Edit
Page Setup dialog box, when the selected output device is TIFF. Alternatively, if you are running the
RIP in one of the multiple modes, the device of any page buffer in the Output Controller can be configured by clicking Configure Device in the Info dialog box of that page buffer.

Navigator RIP version 9

User Manual

87

Configuring Output Formats

Figure 5.6 shows the TIFF Configuration dialog box.

Figure 5.6 TIFF Configuration dialog box

The options in this dialog box fall into categories: location and naming, file format, and post processing‚ as described in the following subsections.

5.8.1 TIFF file location and naming options
Choose the folder in which the Navigator RIP places files by clicking the Folder button and choosing a
folder from the dialog box open the folder in the list and then click OK. The TIFF Configuration dialog box then shows the path to the folder that you chose.
If Path includes resolution is selected, the RIP places any TIFF files created in a sub folder of your chosen folder with the name of that sub folder set to the resolution of the job: for example, 300 or 2400.
Two naming options are available; Conventional and Template-based file name generation. Conventional file naming is much the same as previous versions. Template-based file naming uses various
tags to generate the name. This method has previously been used in a number of Navigator RIP plugins.
Choose the method you wish to use by selecting the option in the File name generation field.

5.8.1.1 Template-based name generation
Selecting Template-based in the File name generation text box allows you to specify the automatic generation of an output file name using a template of fixed text and tags. When this method is selected,
only the Template field is used for file name generation. All options in the Conventional name generation
section are ignored (including the Suffix field).

88

User Manual

Navigator RIP version 9

5.8

Output to TIFF

Most tags are content tags, representing variables such as the date and time a job is processed; the
other tags allow you to reject names that would be illegal in a specified operating system.The maximum length of variables can be specified by preceding the tag name with an integer. For example,
<5jobname> truncates the job name to a maximum of five characters. Tags that produce numeric
values are truncated from left to right, whereas tags that produce alphanumeric strings (strings containing the characters a-z, A-Z, and 0-9) are truncated from right to left. See the example below for
further details.
Fixed text can be part of the file name stem or extension. For example, stem_<3unique>tif would generate a file name of the form: stem_000Cyan.tif, in which stem_ can
be any identifying text.
Try to use a file name extension that does not clash with any established convention.
Note: This file naming scheme does not provide useful file names derived from job names that contain
double-byte characters.
The default when Template-based is selected but the template field is left blank is:
TIFF<2unique>.TIF

This means that when 100 files have been processed the RIP will stop.
Note: If you use unrecognized tags they will be maintained in the output filename.
The following tags are available and can be used in any order:
Tag

Description



The color space of the device, such as DeviceCMYK, DeviceRGB, or
PhotoInk.



The name of the separation, such as Cyan.



The date when the job is processed, in the format YYYYMMDD, unless a truncated form is specified.



Separates the stem of the file name from the file extension, and appears as a
period character ( . ) in the file name. For example, stemext
appears as stem.ext. The use of the  tag enables the verification of
the stem and extension lengths.



The exposure setting, a device specific integer.



The job number allocated by the RIP. Automatic numbering means that successive jobs have incremented job numbers: 000, 001, 002, 003, and so on.



The page buffer name without the page number prefix and without characters
illegal to the operating system. Whitespace characters are used, if present in the
job name.



The page buffer name without the page number prefix, and using only alphanumeric characters (a-z, A-Z, 0-9). Whitespace characters are not used.



The page number (allocated by the RIP), within the current job. For example:
002.



The page number prefix from the page buffer name, such as 1., 2., and so on.

Table 5.1 Output file name tags

Navigator RIP version 9

User Manual

89

Configuring Output Formats

Tag

Description



You can use this tag to include the characters from the prefix before the full point
in the job name.



The page number is determined using the HqnPageCounter procset. This
is zero if the HqnPageCounter procset is not available.



The time when the job is processed, in the 24-hour format HHMMSS, unless a
truncated form is specified.



A unique sequence number used to make file names unique when outputting
files to a directory.



The horizontal resolution of the page, as specified in the Page Setup.



The vertical resolution of the page, as specified in the Page Setup.

Table 5.1 Output file name tags

The legality of an automatically generated file name is always checked against the requirements of the
operating system on which the RIP is running.
To enable portability of files from one operating system to another, you can also use tags to specify the
operating system for which generated file names must be suitable. The use of these tags changes the
rules by which a file name is deemed valid. The tags do not modify the file names generated, but cause
error messages if the file name is invalid.
For example, you can create the template Averylongfilename.tif, but an error is generated. This error occurs because DOS file names require the 8.3 format for stem and extension, which
this template fails to meet by having 17 characters in its stem. Table 5.2 lists the operating system tags.
Tag

Description



Verifies that the file name is a legal file name for the MS-DOS operating system.



Verifies that the file name is a legal file name for the Macintosh operating system.



Verifies that the file name is a legal file name for the Mac OS X operating system.



Verifies that the file name is a legal file name for the UNIX operating system.



Verifies that the file name is a legal file name for Windows operating systems.

Table 5.2 Operating system tags

Note: These operating system tags should always appear at the start of the template line.
Note: Illegal characters which would cause an error on a particular platform are removed. The template format means that it is not currently possible to include less-than (<) or greater-than (>) characters in a template due to their use as tag delimiters.
The following examples demonstrate the format of strings produced by individual tags. Some examples also show how the tags may be used in combination to form a template. The examples are based
on these job details:

90

User Manual

Navigator RIP version 9

5.8

Output to TIFF

Page buffer name: 1. TestPage: Section 20-Book 9
Date: 12th of May, 2004
Note: When creating multiple copies of a file, the same page buffer provides tag information. If a template contains dynamic tags (such as , where the value changes each time that a page buffer
file is output), then multiple copies of the file are created. If the template contains just static tags (such
as , where the job name remains constant), a single output file is created. If there is no
uniqueness in the name, because the file already exists, a message to that effect is sent to the RIP monitor and output fails with a file creation error.


This tag includes the color space of the device in the file name string.
For example, the template tif produces a file name of the form PhotoInk.tif for a device using a PhotoInk color space.


The tag  can be used to include the name of the separation in a file name, for
example: Cyan. You can include just the first letter of the separation by using the tag
<1colorname>, which truncates the separation name to its first letter. If a composite style is
used this is indicated by the string Composite. If a monochrome style is used this is indicated
by the string Gray.


The template tif produces the file name 20040512.tif. You can remove the
year information by using the tag <4date> to produce the file name 0512.tif.


The use of this tag verifies that the file name is suitable for use in a DOS operating system. Illegal characters, such as a colon and whitespace characters which would cause an error, are
removed.
For example, the template tif, would generate an illegal file name
because the job name is greater than the eight characters allowed in DOS operating systems.
Truncation can be forced by using the template <8jobname>tif, which produces
the file name TestPage.tif.


This tag separates the file name stem from the file name extension and enables the verification
of their lengths. It is particularly necessary when creating file names compatible with DOS and
Windows, otherwise the extension may be considered as part of the file name.
For example, the template <8jobname>.tif would cause an error because the dot is
removed as an illegal character and tif is then considered part of the file name stem.

Navigator RIP version 9

User Manual

91

Configuring Output Formats



You can use this tag to include the job number in the file name string. The default length of the
number is three digits, so the first file name created with this tag would be 000, unless a different length is specified. You can specify the length of the job number by preceding the 
tag with an integer. For example, <5job#> creates job numbers five digits long.
In multi-page jobs use the  tag as well as the  tag to differentiate between the
different pages of a job.


This tag ensures that only legal operating system characters are used in the job name.
For example, in the RIP running under any Microsoft Windows operating system, the template
tif produces the file name TestPage Section 20-Book 9.tif. The
colon character ( : ) is removed from the file name, because this is not a valid file name character for any version of Microsoft Windows.


This tag ensures that only alphanumeric characters are used in the job name.
For example, in the RIP running under a Windows operating system, the template
tif produces the file name TestPageSection20Book9.tif. The colon
and whitespace characters are removed from the file name, because they are not alphanumeric
characters.


The use of this tag verifies that the file name is suitable for use in a Macintosh operating system.
Illegal characters such as an asterisk, colon, and quotation marks cause an error. The maximum
length of a file name is thirty-one characters (including the file extension).
For example, using the template <28jobname>tif produces the file name
TestPage Section 20-Book 9, in which the colon has been removed.


You can use this tag to include the page number in the file name string.
For example, the template tif produces a file name of the form 001.tif. It is
advisable to use this tag with the job number tag to differentiate between the same pages of different jobs.


You can use this tag to include the page number prefix from the page buffer name in the file
name string.
For example, based on the page buffer name above, this tag produces the string 1.


You can use this tag to include the time a file is processed in the file name string.

92

User Manual

Navigator RIP version 9

5.8

Output to TIFF

For example, if printing to file at 15:39:36 (approximately 3:39 pm) this tag produces the string
153936.


You can use this tag to generate a unique sequence number for the page. The default length of
the number generated is four digits long, so the first number would be 0000. The length of the
number can be specified, as detailed in the example for the tag .
When restarting the RIP, the unique numbering will attempt to restart at its initial value, for
example: 0000. However, if a file exists with that number, the next available unique number is
used.


The use of this tag verifies that the file name is suitable for use in the UNIX operating system.
Illegal characters such as an asterisk, colon, and quotation marks cause an error. The  tag
cannot be used with this tag because file names in UNIX are composed of a single string and are
not considered to have separate file extensions.
For example, using the template <255jobname>.tif produces the file name
TestPageSection20-Book9.tif, in which the colon and whitespace characters have been
removed.


The use of this tag verifies that the file name is suitable for use in a Windows operating system.
Illegal characters such as an asterisk, colon, or quotation marks cause an error.
For example, the template tif produces the file name TestPage
Section 20-Book 9.tif, in which the colon has been removed.


You can use this tag to include the horizontal resolution of the page in the file name string.
For example, you can differentiate between pages with a resolution of 1440 x 720 dpi and
720 x 720 dpi by using this tag. This tag produces a string such as 1440 or 720, depending on
the horizontal resolution.


You can use this tag to include the vertical resolution of the page in the file name string. For
example, on a page with the resolution 1440 x 720, this tag produces the string 720.

5.8.1.2 Conventional name generation
Selecting Conventional in the File name generation text box allows you use the previously employed
method of generating file names.
In general, the RIP names each file within a folder uniquely by combining characters from some of the
following character strings:


The page number of the job.



A stem; fixed or variable.

Navigator RIP version 9

User Manual

93

Configuring Output Formats



The name of the separation.



A sequentially increasing number.



A suffix.

If the combined length of these character strings is sufficiently long, the RIP truncates the stem to stay
within the maximum length of a file name on the computer running the RIP or an optional tighter limit
providing greater portability between different types of computers.
To impose the limit for portability, select the box Use 8.3 Filenames. This specifies a maximum length
of 8 character names with 3 character extensions: for example, TIFF3001.tif. This limit is necessary if you wish to move the TIFF files to a PC running some older versions of MS-DOS or Windows.
Specify the suffix of the file name (that is, the file extension) by typing a string into the Suffix text box.
By convention, many applications expect the suffix of a TIFF file to be .tif or .TIF.
The stem of the name can be a fixed stem or a variable stem based on the jobname.
You can specify the fixed stem of the file name produced (that is, the first part of the file name) by typing it into the Stem text box. For example: TIFF.
The RIP creates a simple file name based on the stem, a sequentially increasing number, and the suffix. For example, for a stem of TIFF the sequence is: TIFF00.tif, TIFF01.tif, TIFF02.tif, and
so on. If any of these files already exists, the RIP creates the lowest numbered file that does not clash
and increases the numbers from that starting point, avoiding any other existing files.
Alternatively, the RIP can use the job name itself as the variable stem of the file name if you select Use
jobname as stem. The job name is truncated if necessary to keep within the allowed length of file name.
In this case, the RIP creates a file name based on the page number of the job, the job name, the color
of the separation, a number, and the suffix. For example, when separating a color job called jobname.ps, you might see: 1jobnamepsC00.tif, 1jobnamepsM00.tif, 1jobnamepsY00.tif,
1jobnamepsK00.tif, 2jobnamepsC00.tif, 2jobnamepsM00.tif, 2jobnamepsY00.tif,
2jobnamepsK00.tif.
If a file already exists, the RIP creates the next file in the sequence.
If you do not want the page numbers to appear at the start of the file name, select the Del page num prefix check box. In this case, the RIP creates file names such as jobnamepsC01.tif. This option is
only relevant if you select Use jobname as stem.
The Use jobname unchanged option is designed to support jobs arriving with names that include double-byte characters, as used in several Oriental languages and other extended alphabets. Previously,
the output file name was constructed after testing characters byte by byte, and discarding characters
that were potentially illegal in file names. This is still the safe and strongly recommended option, but
when there are illegal characters it can produce files with unpredictable names, which may be difficult
to use in complex workflows.
To retain the previous behavior, leave the check box Use jobname unchanged unselected.
To enable the new option, select the check box Use jobname unchanged. (For this option to work, you
must also select Use jobname as stem.) The result is that each TIFF file has a predictable name but that

94

User Manual

Navigator RIP version 9

5.8

Output to TIFF

name may be illegal because of length or characters used in the name. It is very dangerous to use this
option where the form of incoming job names is not known before submission to the RIP.
To recap, the full path and name of a TIFF file can be as complex as the following example:
D:\RIP\TIFF_Folder\300\1jobnamepsM00.tif

In this example, 300 is the resolution of the TIFF file. The preceding text is the path to the selected
folder and the following text is the file name.
The Unique Filenames option ensures that a ## number is added to the filename, and is selected as a
default (providing the same behavior as previous versions of TIFF output). If the Unique Filenames
option is not selected, the filename does not have the unique ## number added to it.
Shown below are examples of template-based file name generation that give similar (but not necessarily identical) results to the conventional name generation method.
These examples are based on the assumption that the conventional name generation fields ‚stem and
suffix are set to TIFF and TIF respectively.
The template-based method uses a fixed-length uniqueness field. The template-based method will
always fail to generate a unique name when files exist in the output folder using every possible number (whereas the conventional method increases the number of digits in the uniqueness number).
Template-based and Conventional name generation comparison.
Conventional options

Template-based equivalent

Use jobname as stem (on its

.TIF

own)

or

.TIF
Note: The first example is not identical because 
includes a space. The second example is available from 3.10r4.

Use jobname as stem

.TIF

Del page num prefix
Del page num prefix (on its
own)

TIFF.TIF
See Note 1.

Use 8.3 filenames (on its own)

TIFF.TIF
See Note 1.

Use jobname unchanged (on

its own)

TIFF.TIF
See Note 1.

Use jobname as stem

.TIF

Use jobname unchanged

Note: Not identical the template method strips characters which
are not allowed in file names on the relevant platform, such as
colon and slash (all platforms).

Table 5.3 Conventional and Template-based equivalents

Navigator RIP version 9

User Manual

95

Configuring Output Formats

Conventional options

Template-based equivalent

Use jobname as stem

<2unique>.TIF

Unique names

or

<2unique>.TIF
Note: The first example is not identical because 
includes a space.
The second example is available from v3.10r4.

Use jobname as stem
Use 8.3 filenames

<3jobname1><2unique>
TIF

Unique names
Use jobname as stem
Use 8.3 filenames
Use jobname unchanged
Unique names

<3jobname><2unique>
TIF
Not identical.
See Note 2 and 3.

Use jobname as stem

<6jobname1><2unique>TIF

Del page num prefix

See Note 2.

Use 8.3 filenames
Use jobname as stem

<6jobname><2unique>TIF

Del page num prefix

See Note 2.

Use 8.3 filenames
Use jobname unchanged
Unique names

Table 5.3 Conventional and Template-based equivalents

Notes on the table:
1. These Conventional name generation options always generate the name TIFF.TIF.
2.  does not shorten names (which the conventional method's option does), so the tags used
to make up the stem need to total eight. To allow for more characters in the prefix, the jobname
would need to use less. You must use  to separate the name and the extension when using
.
3. Because  strips space and full-stop characters,  and  become
equivalent when  is used.

96

User Manual

Navigator RIP version 9

5.8

Output to TIFF

5.8.1.3 Temporary file names
Temporary files may persist in the case of a RIP failure or in the unlikely occurrence of the final file
rename failing. From TIFF 4.0r0 the following temporary file names are of the form:cccccccc.uuT.
Where cccccccc is an 8-hex-digit string, and uu is two decimal digits. For example:
CA7C63A7.00T
5BDDFE01.00T
5F1CA81C.00T
7B639678.00T

In some rare circumstances, the extension might be 01T or 002T instead of 00T.

5.8.2 TIFF file format options
All the remaining options in the dialog, with the exception of Anti-Aliasing and the Post Processing section, provide different ways of storing the data in the file but do not affect the viewed image. These
different ways of storing the data may be required by the specific application that will read the TIFF
files or may improve the portability or speed of access of the files.
You can choose the basic internal format used for the file from the TIFF Format drop-down list. TIFF
files can either contain the image data in a Single strip (all in one chunk) or Multiple strips
(several chunks).
Use the Style drop-down list in the Edit Page Setup dialog box to choose the color space and interleaving style.
To produce TIFF files with reverse bit ordering, select the Reverse bit order check box. This reverses
the order of bits in a byte in the raster data of a halftoned TIFF file (monochrome), so if the byte was
11010001 it becomes 10001011.
Select the Pad to 32 bit alignment box to make each line of the TIFF file data end on a multiple of 32
bits. This is an efficiency setting, for monochrome output only, that may make the file faster to read in
some applications.
You can choose between Macintosh and IBM PC byte ordering from the Byte ordering drop-down list.
This option lets you select the byte ordering to be that used by Intel (IBM PC) machines (little endian
machines), or Motorola (Macintosh) machines (big endian machines). This is the order of bytes in a
word, needed by the TIFF reader to correctly interpret the TIFF header. Most TIFF readers can read
both sorts of header.
You can choose the compression format used for the file from the Compression drop-down list. The
choices are: None, CCITT Huffman, CCITT Group 3, CCITT Group 4, LZW, or Packbits.
Note: The CCITT compression formats are only suitable for monochrome output.
Finally, for all except monochrome files, you can choose a level of anti-aliasing in which intermediate
colors are used to visually smooth boundaries. (Anti-aliasing is most useful at low or medium resolutions.) Select the desired option from the Anti-Aliasing drop-down list box. None is the fastest option
but provides no anti-aliasing. Of the other options, the higher numbers provide more smoothing, but
also require more time to prepare a given image.

Navigator RIP version 9

User Manual

97

Configuring Output Formats

Note: If you output any job to TIFF CMYK Composite (Pixel) with anti-aliasing set at 8x8, the following error will appear for the TIFF device if the resolution is greater than 300 dpi:
%%[Warning: band size too small - please increase size]%%.

5.8.3 TIFF file post processing
You can use this section of the dialog box to define extra actions after the RIP has created each TIFF
file. To do this, you type text specifying a command and its options in a way similar to typing in a
command prompt or terminal window. The command can be a simple batch file or a complex application, provided that you can give the command all necessary options and information on the command
line; a command needing operator interaction is likely to cause problems.
You can use such post-processing commands to convert the file to a different format or to send the
data to a destination that is not directly supported by TIFF output from the RIP. There are several other
possibilities, such as extracting information for use in reports, limited only by your ability to obtain or
create a suitable application and to supply information to it.
The controls in this section of the dialog box are:
Enable

Select this check box to enable a post-processing command, as entered in the
Command text field. Leave it unselected to disable post-processing.

Create Window

Check this box to display a command prompt window: for example, to display any messages produced by the post-processing command. The command
window closes at the end of the command so, to read any messages, you may
need a timed delay before the command finishes. (A wait for a key-press may
be useful for testing but becomes unworkable with many output files.)

Command

The entry in this text field is a string specifying a post-processing application,
which must be available on the computer running the RIP. Optionally, you
can supply options understood by the application, and data such as the name
of the relevant input or output files. The command string can contain substitution codes. The RIP expands the codes and runs the command at the end of
each output file.
Post processing substitution codes on page 98 lists the recognized substitution codes.
The string should normally include the file extension and the full path name
of the application file. However, you can type just the file name if the command file has extension .EXE and is in one of the folders specified by the
PATH variable. File names passed to the application as data are assumed to be
in the folder receiving the TIFF files, unless you type a different path name.

5.8.3.1 Post processing substitution codes
The Navigator RIP recognizes the substitution codes shown in Table 5.4. You can insert an integer
between the percent character and the letter code, to restrict the maximum number of characters used
in the result string. For example:%6j represents the first six characters of the job name:

98

User Manual

Navigator RIP version 9

5.8

Output to TIFF

.
Code

Meaning

%c

The current separation color, represented by a string of default length one
character. Typical separation names are Cyan, Magenta, Yellow, and
Black. Examples for length one are: C, Y, M, and B.

%d

The current date. In the case of the TIFF plugin, this defaults to a length of 6
digits (YYMMDD).
For example: 26 October 1998 becomes 981026.
%8d gives YYYYMMDD.

%e

The job exposure, as entered in the Page Setup dialog box. For example:
221.

%f

The output TIFF file name, not including the full path. For example, based
on jobname and not suppressing the page number:
1ColdfacepsC05.TIF.

%g

A fixed jobname using the following rules:
1. Skip over the leading nn.which the RIP pre-pends.
2. Remove all non-alphanumeric characters.

%j

The current page buffer name, as shown in the Output Controller/Monitor.
For example: 1. Coldface.ps (C).

%n

The current job number, an integer that the Navigator RIP increments each
time it processes a new job. For example: 115.

%o

The full output directory path set by the Folder button (but not the resolution, if the check box to include resolution has been checked; nor the file
name). For example: C:\S\TIFF\.

%p

The current page number within the job. For example: 13.

%r

The job resolution, in dots per inch. For example: 72.

%s

The current job name, after removal of characters that would be illegal in a
file name. For example: Coldfaceps.
%s uses the following rules:
1. Skip over the leading nn. which the RIP pre-pends.
2. Remove all parenthetical expressions.
3. Remove everything which comes before delimiter characters - : (colon),
; (semi-colon), @ (commercial at), - (hyphen), and control characters.
Delimiters within parentheses do not count.
4. Remove all non-alphanumeric characters.
5. If rules 1-4 result in an empty name, start over again and just use rule 4.
Table 5.4 Post processing substitution codes

Navigator RIP version 9

User Manual

99

Configuring Output Formats

Code

Meaning

%t

The current time in the format HHMMSS, using the 24 hour clock. The
default length is 6. For example, a time just after 7:30 pm would be shown:
193211.

%x

The current file name suffix. For example: TIF.

%z

The output file name stem, is taken from the job name if Use jobname as
stem is selected, otherwise it will be taken from the Stem text field.
For example: if Stem is set to TIFF, and Use jobname as stem is not
selected; %z will produce TIFF00, TIFF01, and so on for the output files
TIFF00.tif, TIFF01.tif and so on.
Table 5.4 Post processing substitution codes

5.8.3.2 Checking the Command string
The RIP reports each command and the working folder (directory) in the main window, in the following form. Italics show which text can vary with different jobs and Page Setups.
Running post-job command 
"C:\RIP\myproc.bat C:\S\TIFF\Coldfaceps.TIF" in directory C:\S\TIFF\

For a more thorough test of how the command behaves when used at the command prompt of the
operating system, select the Create window box and try creating a batch (.BAT) file with these contents
and using the name of the batch file as the application in your command string.
echo %1 %2 %3 %4 %5 %6 %7 %8 %9
pause

Note: If you have problems with a command, test it outside the RIP by opening a command window
and running the command manually. If you think that you have used any substitution code from which
the RIP might generate an element containing characters with a special meaning to Windows, try surrounding that code with double quotes. For example, use "%f" in the Command field rather than just
%f. If there are no special characters involved, look at the number of substitution codes that you are
using and the length of the command string both before and after expansion of the substitution codes.
The limit on the length of the expanded command string varies with the Microsoft Windows environment but you should have no problems with up to 125 characters in the string after expansion.

5.9 Output to PDF Raster
The PDF raster output plugin is a layered option and requires a password for it to be enabled. See
Extras on page 185 for more information.
The Navigator RIP can produce PDF raster format files, which you can choose by selecting the
PDFRaster output device in the Edit Page Setup dialog box.
The Navigator RIP produces PDF raster files which are compatible with various PDF/X standards
depending on the selection made in the PDF Raster Configuration dialog. PDF raster files can be con-

100

User Manual

Navigator RIP version 9

5.9

Output to PDF Raster

sidered as a raster bitmap wrapped in PDF/X and can be opened in PDF readers such as Jaws PDF
Editor and Adobe Acrobat.
Under Separations, Screening & Color, the Style drop-down list contains all the separations styles created for the PDFRaster device. The choice of separations style determines the color space and format
of the output.
Note: From v8.1 because DeviceMono is no longer available any page setup which previously used
this option in the Separations dialog will now not work. The RIP setups should be changed to use
Monochrome instead.
You can configure how the RIP produces and names PDF raster files by clicking Configure Device in
the Edit Page Setup dialog box, when the selected output device is PDFRaster. Alternatively, if you
are running the RIP in one of the multiple modes, the device of any page buffer in the Output Controller can be configured by clicking Configure Device in the Info dialog box of that page buffer.
The PDF raster output plugin supports up to 32 spot colors meaning that an output PDF raster file can
contain up to 36 colorants (CMYK plus 32 spots). When a PDF raster containing spot colors is created
by the RIP and then displayed in a PDF application (like Jaws PDF Creator or Adobe Acrobat), a tint
transform is used to tell those applications how to display the colors. If, however, the PDF is passed
onto a multichannel device (like the Navigator RIP), which can support those colorants, they will be
supported.
Note: While the plugin will create PDFs with up to 32 colorants (total), the PDF specification defines
the limit as 8 colorants, and so the plugin issues a warning when more than 8 are requested. Once the
32 limit is reached, the plugin will refuse to process the page.
Acrobat 8 will process pages with more than 8 colorants.
Note: PDF source documents can sometimes contain pages of variable size. If present, these variable
page sizes are maintained in the output file.
Note: Do not try to re-order pages using the PDF raster plugin in the Output Controller.
Note: If you are processing very large pages you may wish to increase the Memory for RIP setting. If
the RIP runs out of memory the job will fail. For more information see Navigator RIP memory allocation on page 186.
Figure 5.7 shows the PDF Raster Configuration dialog box.

Navigator RIP version 9

User Manual

101

Configuring Output Formats

Figure 5.7 PDF Raster Configuration dialog box

The options in this dialog box fall into categories location and naming, file metadata, file format, and
post processing‚as described in the following subsections.

5.9.1 PDF raster file location and naming options
Choose the folder in which the Navigator RIP places files by clicking the Folder button and choosing a
folder from the dialog box open the folder in the list and then click OK. The PDF Raster Configuration
dialog box then shows the path to the folder that you chose.
If Add resolution to end of Path is selected, the RIP places any PDF raster files created in a sub folder of
your chosen folder with the name of that sub folder set to the resolution of the job: for example, 300
or 2400.
Template-based file name generation is provided which uses various tags to generate the name. This
method has previously been used in a number of Navigator RIP plugins.

5.9.1.1 Template-based name generation
Template-based file name generation is used for PDF raster output, and allows you to specify the automatic generation of an output file name using a template of fixed text and tags. When this method is
selected, the Template field is used for file name generation.

102

User Manual

Navigator RIP version 9

5.9

Output to PDF Raster

Most tags are content tags, representing variables such as the date and time a job is processed; the
other tags allow you to reject names that would be illegal in a specified operating system.The maximum length of variables can be specified by preceding the tag name with an integer. For example,
<5jobname> truncates the job name to a maximum of five characters. Tags that produce numeric
values are truncated from left to right, whereas tags that produce alphanumeric strings (strings containing the characters a-z, A-Z, and 0-9) are truncated from right to left. See the example below for
further details.
Fixed text can be part of the file name stem or extension. For example, stem_<3unique>tif would generate a file name of the form: stem_000Cyan.tif, in which stem_ can
be any identifying text.
Try to use a file name extension that does not clash with any established convention.
Note: This file naming scheme does not provide useful file names derived from job names that contain
double-byte characters.
The default value for template-based name generation is:
Raster<2unique>.pdf

This means that when 100 files have been processed the RIP will stop.
Note: If you use unrecognized tags they will be maintained in the output filename.
Note: The list of tags displayed in the PDF Raster Configuration dialog is only a useful subset. All
tags are supported for PDF raster output.
Template-based name generation for PDF raster works in exactly the same manner as for templatebased name generation for TIFF. Therefore, for full details on all the tags available see Templatebased name generation on page 88.

5.9.2 File Metadata
When either the Update PDF Creation Date or Update PDF Modification Date option is checked, the modification date or creation date will be set to the current time, whether or not these dates are present in
the original PDF source file. If a date is present in the original source document and you have not
selected the these option, the original date will be used in the output file.
The Mark raster as Trapped option allows the output PDF raster to be set as trapped or not. PDF files
have a trapped flag which can be set either true or false. If set true the contents of the PDF have
been trapped in some way, either by the RIP or by using some third party plugin. This option allows
you to decide whether the output PDF raster is configured as trapped.
If required, you can specify an Art Box or Trim Box size if values for one or the other does not already
exist. If values for Art Box and Trim Box are present in the source PDF file they will be used no matter what values are input into this dialog.
To enter a value select either Art Box or Trim Box from the drop-down list and then enter values for the
LLx, LLy, URx, and URy which specify the lower-left x, lower-left y, upper-right x, and upper-right y
coordinates of a rectangle. For more information on specifying these values see the PDF Reference
Sixth Edition v1.7 Section 3.8.4.

Navigator RIP version 9

User Manual

103

Configuring Output Formats

When the values have been entered check the Apply box.
Note: All boxes will be within the Media Box, and if they are not they will be clipped to the Media
Box size. Trim Box and Crop Box settings are maintained in the output file if they are present in the
source PDF.
If a PDF input file has a date within the metadata which does not conform to the PDF specification a
warning will appear and the date in the output PDF will be changed to the current RIP date. Warning
of the following form are displayed when this occurs:
Warning: input PDF uses a modification date \"%s\" that does not conform to the
PDF specification.

or
Warning: input PDF uses a creation date \"%s\" that does not conform to the PDF
specification.

5.9.3 PDF raster file output format options
All the remaining options in the dialog, with the exception of the Post Processing section, provide different ways of storing the data in the file but do not affect the viewed image.
You can choose the page style option from the Page style drop-down list. This option decides whether
the output file is saved as one file per job (a 100 page job is created as a single PDF document containing 100 pages), or one file per page (a 100 page job is created as 100 separate PD documents each containing one page).
Note: If you abort a page and your PDF raster configuration is set to one file per job (rather than one
file per page) your whole job and all pages therein will be aborted.
You can choose the output PDF format settings from the PDF Format drop-down list. Currently the
options are: PDF/X 1a:2003 (PDF 1.4) and PDF 1.4.
You can choose the compression format used for the file from the Compression drop-down list. The
choices are: None or ZIP. The compression settings only affect images.
The Level option determines the amount of compression applied to the output file. A value of 1 means
don’t compress very much (and is quicker); a value of 9 means compress as much as possible (and is
slower). The default value is 6.
You can choose the rendering intent to be used for the file from the Output identifier drop-down list.
There are various styles available. These styles cannot be changed or added to.
You can choose the output data format used for the file from the Output drop-down list. The choices
are: ASCII or BINARY. If you are planning to transmit the output file via e-mail, choose ASCII,
which provides an Ascii85 encoding. Otherwise, for normal use choose BINARY.

5.9.4 PDF raster file post processing
You can use this section of the dialog box to define extra actions after the RIP has created each PDF
raster file. To do this, you type text specifying a command and its options in a way similar to typing in
a command prompt or terminal window. The command can be a simple batch file or a complex appli-

104

User Manual

Navigator RIP version 9

5.10

Sending output to a printer

cation, provided that you can give the command all necessary options and information on the command line; a command needing operator interaction is likely to cause problems.
You can use such post-processing commands to convert the file to a different format or to send the
data to a destination that is not directly supported by PDF raster output from the RIP. There are several
other possibilities, such as extracting information for use in reports, limited only by your ability to
obtain or create a suitable application and to supply information to it.
The controls in this section of the dialog box are:
Enable

Select this check box to enable a post-processing command, as entered in the
Command text field. Leave it unselected to disable post-processing.

Create Window

Check this box to display a command prompt window: for example, to display any messages produced by the post-processing command. The command
window closes at the end of the command so, to read any messages, you may
need a timed delay before the command finishes. (A wait for a key-press may
be useful for testing but becomes unworkable with many output files.)

Command

The entry in this text field is a string specifying a post-processing application,
which must be available on the computer running the RIP. Optionally, you
can supply parameters understood by the application, and data such as the
name of the relevant input or output files. The command string can contain
substitution codes. The RIP expands the codes and runs the command at the
end of each output file.
Post processing substitution codes on page 98 lists the recognized substitution codes.
The string should normally include the file extension and the full path name
of the application file. However, you can type just the file name if the command file has extension .EXE and is in one of the folders specified by the
PATH variable. File names passed to the application as data are assumed to be
in the folder receiving the PDF raster files, unless you type a different path
name.

5.10 Sending output to a printer
You can use the Navigator RIP to produce output on a variety of different imagesetters and printers.
The options available depend on the device drivers that have been installed with your copy of the RIP.
If any device drivers have been installed, you can select one of these drivers in the Edit Page Setup
dialog box from the Device drop-down list. Selecting Ultre, PelBox, or HP650, for example, sends
output to the corresponding printer, provided that somebody has done any necessary configuration to
suit the way that the printer is connected and configured.
You can gain the ability to send output to many other types of device by adding other output plugins.
A simple plugin may add a single device driver, and this manual usually talks about the device that the
driver supports. Complex output plugins can support several device drivers and provide preconfigured
Page Setups, screening, or color management. Such complex plugins can require several steps during

Navigator RIP version 9

User Manual

105

Configuring Output Formats

installation: hardware installation, system software modifications, software installation in the Navigator RIP, and enabling specific devices or RIP options with passwords. There is likely to be a separate
installation or operators manual for such plugins and, perhaps, a special installation program.
Note: It is often dangerous to attempt to re-install or update an installed plugin in the same copy of the
Navigator RIP, because of file name mapping (described briefly on page page 33) and other issues. It
is much safer to make a fresh installation of the RIP, install the new plugin, and then transfer your setting to the fresh installation. The separate Migrate program can help you make this transfer.
Where a plugin supplies a single device type, the device type becomes ready for use as soon as it has
been installed and, if necessary, enabled with a password. Multiple device output plugins appear first
as one of the options in the Device Manager, where you can choose which device you want to use. See
Multiple device output plugins on page 107.
Once installed, the name of a device added with a new output plugin appears as one of the device
options in the Edit Page Setup dialog box and you can select it just like any other device.
Under Separations, Screening & Color, the Style drop-down list contains all the separations styles created for the current device. The choice of separations style determines the color space and format of
the output.
Note: Some output plugins allow you to select the color generation mode using the Configure Device
button. When this is the case, the Style drop-down list contains only the separations styles corresponding to the selected color generation mode.
For certain types of output device, a text box labeled Exposure becomes active in Edit Page Setup. By
specifying a number in the text box, you can change the exposure of the chosen output device: this
varies the power of the laser used to create the image, which in turn makes the image lighter or darker.
Refer to the documentation for your output device to see if it has an exposure control. Choosing the
correct exposure is described in Chapter 12, Calibration.
Media and cassette monitoring and management facilities are available for all continuous feed printers
supported by the Navigator RIP. For details of how to use these facilities, see Chapter 9, Media Management, and Cassette management on page 135.

5.11 ProofReady plugins
ProofReady plugins allow the RIP to provide page images to a supported printer.
When you create a Page Setup for a ProofReady device a default color setup is applied, using input
and output profiles, and rendering intents defined within the plugin. You must have ColorPro enabled
to use this automatic color management feature. You can also create your own color setup if you do
not wish to use the default settings.
ProofReady plugins have the following capabilities:





106

Instant color management using supplied profiles
A choice of resolution for the output page image for all media sizes and types supported by the
model of printer in use
User choice of output quality

User Manual

Navigator RIP version 9

5.12



Availability of screening techniques



Preview of the screened output

Multiple device output plugins

Using the ProofReady plugin is straightforward. You select the required device, configure it, select a
profile from the ProofReady menu and then print.
If you would like to improve color accuracy and you have a measurement device available, you can
print an uncalibrated target, measure it with Genlin and then import the data and make a new calibration set.
You then go back to the Page Setup and select this calibration with the ProofReady Setup unchanged
and proof using the calibration and the ProofReady setup combined.

5.11.1 Using ProofReady plugins
Each ProofReady plugin is supplied ready to use with preconfigured color management for several
types of media.
With a ProofReady plugin, the way that you apply color management is simpler than with ColorPro
because the setups are ready to use. The special color setups appear in the ProofReady menu in the Output Device section of the Page Setup dialog box, each named for a particular combination of media and
resolution. Choosing one of the entries from the ProofReady menu, gives you a default color setup that
produces good results for most jobs.
When an option is selected from the ProofReady menu, the options in the Separations, Screening and
Color section of the Page Setup dialog are enabled. This allows you to create and edit ProofReady
color setups or separation styles. However, non-compatible separation styles and color setups cannot
be selected or created.
If you want to create a calibration set for your printer rather than using the reference calibration profile, you can print an uncalibrated target and import the data using Genlin. Once you have created a
calibration set, you must choose it from the Calibration menu.
You can also expand the capabilities of a ProofReady plugin, by creating and using custom color setups built upon the same profiles used to create the default color setups.
For more details of ProofReady plugins, see the user guide for the relevant ProofReady plugin.

5.12 Multiple device output plugins
The Navigator RIP lets you install multiple device output plugins, which allow you to drive a number
of different devices without needing a separate output plugin for each one.
Note: Many output plugins intended for use with a range of similar output devices, such as inkjet
printers, are multiple output plugins but are supplied with preconfigured devices ready for use in the
Edit Page Setup dialog box. You should only need to use the description given here if the installation
procedure for a plugin fails to install a device of the type you want.

Navigator RIP version 9

User Manual

107

Configuring Output Formats

This discussion uses the following terms:
Device

A device is often a physical piece of equipment which produces output. It can
also be a way of producing a graphics file in a format like TIFF. A device can
be selected by name from the Device drop-down list in the Edit Page Setup
dialog box.

Device type

Any particular device is of a certain type. For instance, some printers are of
type Ultre, and some are of type ExxtraSetter. Distinguishing different device
types is like distinguishing different models of computer. Some options (for
example, the resolutions or media types available) depend on the device type.

Output plugin

The output plugin is the software you install into the RIP to make it drive a
particular device. It tells the RIP the name and type of the devices it drives, as
well as the address of the device (that is, where to find the device in terms of
the computer rather than physical location).

With ordinary output plugins, one plugin can drive only one device. If you want to install a large number of devices, you need many different output plugins. This can make configuration of the system
cumbersome.
Multiple device output plugins allow you to drive a number of different devices using just one plugin.
You can have any number of devices of a particular type.
Figure 5.8 shows you the configuration of an imaginary system using both single and multiple device
drivers.

Device Driver

U
Device1

U
Device2

Ultre Devices (marked U)

Multiple Device
Driver

U
Device3

E
Device4

E
Device5

ExxtraSetter Devices (marked E)

Figure 5.8 The use of multiple device drivers in the Navigator RIP

Five devices are shown, driven by two output plugins. Device1 is of type Ultre, and is driven by an
ordinary output plugin.

108

User Manual

Navigator RIP version 9

5.12

Multiple device output plugins

However, the remaining four devices are all driven by one multiple device output plugin. Two of these
devices are of type Ultre, and two are of type ExxtraSetter, so this driver must know about at
least two device types it may well know about others.

5.12.1 Installing and using multiple device plugins
Install a multiple device output plugin, just as you would for an ordinary output plugin and as
described in Sending output to a printer on page 105. The plugin then appears as one of the options in
the Device Manager dialog box, shown in Figure 5.9.
You create and configure devices driven from a multiple device driver using the Device Manager. To
open the Device Manager click the Device Manager button, which is the icon button under Output
Device in Edit Page Setup. The Device Manager is also available from the Navigator RIP menu.

Figure 5.9 Device Manager dialog box

The Plugin drop-down list shows the multiple device output plugins currently installed in the RIP. You
can install several multiple device plugins, and this drop-down list lets you choose between them. The
devices driven by the selected plugin appear in the table listing: each line displays the name, type, and
address of one device. For instance, in Figure 5.9 the dialog box lists devices linked to the Epsonvsd
multiple device plugin.
Note: Both the name and the values entered for each device are used here for illustration only. There
are several multiple device plugins but their names and the acceptable values vary greatly, so they are
documented separately.
The Device Manager has the following uses:







To change the configuration of a device, select its entry in the list and click Edit then use the
Device Manager Edit dialog box.
To add a new device, click New then use the Device Manager Edit dialog box.
To add a device that is similar to an existing device, select its entry in the list and click Copy
then use the Device Manager Edit dialog box. You must give the copy a new name.
To delete a device from the current multiple device driver, select it in the Device Manager and
click Delete. This removes the driver immediately.

Navigator RIP version 9

User Manual

109

Configuring Output Formats

When you click the New, Edit, or Copy button, the RIP displays the Device Manager Edit dialog box
shown in Figure 5.10.

Figure 5.10 Device Manager Edit dialog box

This dialog box has three fields that you can edit:






Specify a name for the device in the Name text box. This is the name that appears in the Device
drop-down list in the Edit Page Setup dialog box, and elsewhere.
Choose the device type from the Type drop-down list - a list of all the device types that the
selected multiple device output plugin supports. The device types are preset during the manufacture of a plugin and are not subsequently configurable. You cannot tell a multiple device
driver to look for a device with a type not listed here.
Use the Address text box to type in the address of the device you are adding or editing. This
text box provides device information such as a multiplex address, a SCSI port, or a file name;
all highly dependent on the type of device. For details of what to enter here, refer to the
documentation (available from your supplier) for the specific multiple device output plugin.

Click OK when all values in the Device Manager Edit dialog box are as you want them. This confirmation is provisional: you must also click OK in the Device Manager to finally save your changes. If
you opened the Device Manager from the Edit Page Setup dialog box, you can also save the changes
by clicking the Select button. In addition to saving the changes, the Select button displays the selected
device in the Edit Page Setup dialog box. Click Cancel to discard all changes.

5.13 Output plugin dialog boxes
Many devices have features which only apply to that device. For example, a certain printer may be
able to print on both sides of the paper, a feature called duplexing. Such features may be controllable,
in which case the device driver offers a dialog box unique to that driver containing, for example, a
check box to turn duplexing on or off. For example, the device TIFF can have its output file name and
format configured (as shown in Figure 5.6, page 88). If the driver does not have any configurable
options, the Configure Device button is disabled.
Some output plugins allow you to set the color generation mode using the Configure Device button. In
these cases, the Style drop-down list contains only the separations styles corresponding to the selected
color generation mode. Otherwise, the choice of separations style determines the color space and format of the output.

5.14 Separations, Screening and Color
The options under Separations, Screening & Color allow you to choose the separations style and color
setup for the current Page Setup.

110

User Manual

Navigator RIP version 9

5.14

Style

Separations, Screening and Color

The Style drop-down list allows you to choose a separations style for the currently selected device. A separations style contains information on separations and screening (where appropriate), which you can use in one or more
Page Setups. The choice of separations style determines the color space and
format of the output.
Note: Some output plugins allow you to set the color generation mode using
the Configure Device button. In this case, the Style drop-down list contains
only the separations styles corresponding to the selected color generation
mode.
If you change the Device, you may have to select a corresponding separations
style for the new device before you can save the Page Setup.
Click the Separations Manager button to create or edit a separations style.

Separations Manager

This icon button is next to the Style drop-down list. It opens the Separations
Manager dialog box, from which you can create or edit a separations style.
See Chapter 13, Color Separation for details.
The Separations Manager is independent of the Edit Page Setup dialog box.
You can create or edit a style in the Separations Manager, even if you do not
want to use it in the current Page Setup. If you do want to use a new or
changed style for this Page Setup, select the style in the Separations Manager
and click the Select button.
Color

The Color drop-down list allows you to choose a color setup for the currently
selected device and color space. The choice of separations style determines
the color space. Click the Color Setup Manager button to create or edit a color
setup. See Color Setup on page 354 or the separate manual ColorPro User
Guide.

Color Setup Manager

This icon button is next to the Color drop-down list. It opens the Color Setup
Manager dialog box, from which you can create or edit a color setup. See the
separate manual ColorPro User Guide.
Separations Manager

This icon button is next to the Style drop-down list. It opens the Separations
Manager dialog box, from which you can create or edit a separations style.
See Chapter 13, Color Separation for details.
The Separations Manager is independent of the Edit Page Setup dialog box.
You can create or edit a style in the Separations Manager, even if you do not
want to use it in the current Page Setup. If you do want to use a new or
changed style for this Page Setup, select the style in the Separations Manager
and click the Select button.
TrapPro Manager

Navigator RIP version 9

User Manual

111

Configuring Output Formats

The TrapPro Manager is independent of the Edit Page Setup dialog box, and
is only available if TrapPro is enabled under Configure RIP > Extras. You can
create or edit trapping setups in the TrapPro Manager, even if you do not
want to use them in the current Page Setup. If you do want to use a new or
changed trapping setup, select the trapping setup in the TrapPro Manager and
click the Select button.
For more information see Trapping features on page 365.

5.15 Advanced Media Saving
Media saving is provided as an extra layered option that allows you to instruct the Navigator RIP to
automatically fit pages onto the output media in a way that makes the most efficient use of the media.
For example, when imaging A4 pages they would normally be placed one above the other on the output media. With media saving enabled, the A4 pages could be placed side-by-side thus utilizing more
of the media width.

5.15.1 How to activate Advanced Media Saving
To make use of the Advanced Media Saving, you must enter a valid password in the Configure RIP >
Extras dialog. For more information on how to activate a password protected option see Extras on
page 185.
This option is especially useful with Capstan and Drum devices. For more information on how to
select the extra features supplied with the RIP see Extras on page 185.
Media saving is enabled for each Page Setup by clicking the Advanced Media Saving option situated in
the lower left, Cassette & Page section of the Edit Page Setup dialog box.

Figure 5.11 Advanced Media Saving option

With the Advanced Media Saving option selected, jobs processed in the RIP are automatically
grouped together with other jobs according to resolution, bit depth, paper type and output device. The
jobs are only output to the device when the page is full. A collection of jobs on a page is known as a
flat.
For example, you may have a 32 inch roll installed in the output device and a queue of three A4 sized
jobs waiting to be output. Instead of printing a single job along the width of the roll, the RIP will fit all
three jobs along the width of the roll, ultimately saving media.
The Media saver works by receiving page buffers from the RIP. In the pagebuffer header there are
fields specifying the media width and media height, page width and page height. The Media saver
uses the media width and media height values as the size of the flat and page width and page height
value as the size of the page.

112

User Manual

Navigator RIP version 9

5.15

Advanced Media Saving

If the device supports cassettes, the media width and media height values are defined in the Cassette
manager. If the device is a roll, media height in the page buffer is the same as the page height and is
ignored by the media saver.
If the device does not support cassettes, the media width and media height values are those entered by
the user in the Page Layout dialog box. Again the roll device rule applies.
Note: A Watermark RIP cannot currently be used in conjunction with the media saving option. For
this reason, the Advanced Media Saving check box in the Page Setup dialog box is disabled when
using a Watermark RIP.

5.15.2 Tracking media width for automatic cassette selection
The width of media used is tracked to aid the use of automatic cassette selectors.
For roll fed devices, the length of the media that needs to be exposed when outputting a flat has always
been tracked, with the assumption that the width value is constant. However, because automatic cassette selection devices are starting to be used, it is now important for the RIP to track the width of the
media used in addition to the length.
If the width of the flat is reduced, a cassette with smaller width media can be selected leading to a
shorter exposure time and saving of media.
When enabled, the RIP Output menu contains the Advanced Media Saving option, which on selection
displays the Media Saving dialog.

Figure 5.12 Media Saving dialog box

Navigator RIP version 9

User Manual

113

Configuring Output Formats

5.15.3 The Media Saving dialog box
The Media Saving dialog box displays all the information required for you to keep track of which jobs
are being combined into flats. Jobs will only be added to a flat if the resolution, bit depth, paper type
and device are all the same; if any of these are different a new flat will be created.
As soon as a flat is full it will be output to the device. A flat is deemed full when it reaches that stage
where any new page of the same specification will not fit in the flat.
You can send a flat to the output device before it is completed by highlighting the flat to be output followed by clicking the Print Flat button.
You can ensure enough space is placed around each job by specifying a value in the Margin between
pages option. The Media saver ensures that there is the same given margin between the edges of the
paper and the pages of jobs - it achieves this by absolute positioning of the pages on the flat. Shown
below is a diagram illustrating how pages are position on the flat.
Margin between
pages value

Cut mark
between flats

Figure 5.13 Margin media saving control

Note: If when using media saving you get output that is clipped, you should make the Margin between
jobs value greater than the value of the unprintable margin for the device.
For a TIFF output device (or any other device with an unlimited media width and height) the media
width and height end up being the same as the Page Size, and the size of a TIFF flat would be the same
as the first page buffer on the flat.
From Eclipse Release SP4 the TIFF media width and TIFF media height text boxes are added to the
Media Saving dialog. These options are designed for use with the TIFF output device (and any other
device with unlimited width and height). The values in these fields are used to calculate the size of the
TIFF flat.
If you want to avoid the possibility of a flat never being output, because there may never be enough
page buffers of the same type, you can click the Time to wait between pages option and enter either a
number of minutes or hours. When an incomplete flat has been displayed in the Media Saving dialog
box for the defined time out period, it will automatically be output to the selected device. When Time
to wait between pages is not checked, partially filled flats will always wait for new pages of the same
specification to arrive.

114

User Manual

Navigator RIP version 9

5.15

Advanced Media Saving

You can Roam individual pages displayed in the Media Saving dialog by selecting them and clicking
the Roam button. Similarly, you can delete individual pages by selecting them and clicking the Delete
button.
When a flat is printed, the page buffers that the flat references are deleted from the disk. Because of
this, the Print Flat button is disabled when a Roam window is open.
If a flat is going to be printed because the time out period has expired and a Roam window is open, the
flat is placed in a queue and is printed as soon as all Roam windows are closed.
By default, if the device is roll fed (for example part drum or capstan), the buffered pages are placed
on the flat in one row along the width of the media. The height of the flat is ultimately that of the tallest page placed on the flat, and the width of the flat is as specified in the Page Layout dialog.
This default behavior can be changed in two ways.




For part drum devices, the Fill whole drum (for part drum devices only) check box controls the
behavior that defines the media height as that of the device width, allowing multiple rows of
page buffers on the flat, and as such allowing the whole of the drum to be utilized.
For part drum and capstan devices (that is, roll fed devices), the Track flat width (for roll fed
devices only) check box controls the width of the flat. If it is checked, the flat width will be the
width of the widest row of pages on the flat.

You may encounter problems when you are outputting to a device that specifies a minimum media
width. If a flat is submitted which defines a media width that is smaller than the device's minimum
media width, the plugin will reject the flat and display the message:
"Error - The media width is less than the minimum allowed" - and the job is
aborted.

Also note, that if you are outputting separations and the flat size is being tracked (either width or
height), it can occur that the separations will have different sizes. You are therefore unable to Roam
these separations together.
From the Eclipse Release SP3 an option to Switch roam color to black is added to the Media Saving dialog. This is only enabled when the Order of pages on flat option is set to none, that is, when more than
one separation color is allowed on the same flat. When selected, the Roam color of the resulting flat is
black. This option does not apply to composite output.
Note: You are able to change the Roam Color from the Throughput Info dialog. See Changing the
color on page 68 for more information.
From version 5.5r1 an extra media saving option is provided called Order of pages on flat. The Order of
pages on flat option provides a drop-down list with the following options:
none

Page buffers are placed on flats if they fit, regardless of color.

by separation 

Each flat is dedicated to a particular separation name, therefore page buffers
with different separation names cannot appear on the same flat. For example,
cyan separations can only appear on cyan flats. However, once allocated to its
flat, a page buffer may be positioned anywhere on that flat.

Navigator RIP version 9

User Manual

115

Configuring Output Formats

by separation, page position

Each flat is dedicated to a particular separation name, in the same way as
described in the by separation option above. The page buffers for a given
job must all be at the same position on their respective flats. But no consideration is given to what other separations may be on these flats. Therefore, it is
not guaranteed that the group of flats that contains all the page buffers for any
one job also contains all the page buffers for the other separations on the flat.
Note: This option will not work for preseparated jobs, because the RIP treats
each separation as a different job.
by separation, page position, job

Each flat is dedicated to a particular separation name. The page buffers for a
given page must all be at the same position on their respective flats. It is additionally guaranteed that the group of flats that contains all the page buffers for
any one job also contains all the page buffers for the other pages on the flat.
Empty spaces will be left for separations that are not available or missing.
Note: This option will not work for preseparated jobs, because the RIP treats
each separation as a different job.
From the Eclipse Release SP3 a Name flat after option is provided in the Media Saving dialog which
controls the job name of the flat. The default setting is to name the flat after the 1st PGB in flat
which is how it always has worked. That is, the flat is named after the first job placed on the flat. The
alternative option is to name the flat after the flat number. With this option the job name uses the
flat number as it appears in the dialog, so Flat 1 will have the job name; 1. Flat 1. Subsequent new
flats will be named incrementally. When the RIP is stopped and started the name of the first flat will
be; 1. Flat 1 unless an existing flat is detected in the media saving, in which case any new flats will
be named incrementally from the name of the detected flat.
Note: If you decide to change this option midway through a RIP session, any previously created flats
will not be renamed, that is the change will only affect any subsequent flats that arrive.
The following examples illustrate the differences between the by separation, page position
and by separation, page position, job options.
Incoming Job

by separation, page
position

by separation, page
position, job

Flat
No.

position 1

position 2

position 1

position 2

‚Äî, ‚Äî, ‚Äî,
K1

K1

K4

K1

‚Äî

Flat 1

C2, M2, Y2, ‚Äî

C2

C4

C2

‚Äî

Flat 2

‚Äî, M3, Y3, ‚Ä
î

M2

M3

M2

M3

Flat 3

C4, ‚Äî, Y4, K4

Y2

Y3

Y2

Y3

Flat 4

Table 5.5 Media saving‚Äîexample 1

116

User Manual

Navigator RIP version 9

5.15

Incoming Job

by separation, page
position

Advanced Media Saving

by separation, page
position, job

Flat
No.

‚Äî

Y4

C4

‚Äî

Flat 5

‚Äî

‚Äî

Y4

‚Äî

Flat 6

‚Äî

‚Äî

K4

‚Äî

Flat 7

Table 5.5 Media saving‚Äîexample 1

Table 5.5 shows an example where four incoming jobs are placed on flats differently according to the
selection of either; by separation, page position or by separation, page position,
job.
With by separation, page position selected, the first incoming job contains only a black separation (K1) which is placed on the first flat in position 1. The second job (C2, M2, Y2) contains no
black separation and therefore creates three new flats (2, 3, and 4). The third job contains only
magenta and yellow separations (M3, Y3).There is space on existing flats for this job, magenta flat 3,
position 2 and also yellow flat 4, position 2. The fourth job contains cyan, yellow and black separations, (C4, Y4, K4). There is space on black flat 1, position 2 for K4, and also space on cyan flat 2,
position 2 for C4. However, yellow flat 4 already contains a separation, therefore a new flat (5) is created and the yellow separation is placed in position 2.
It can be seen from this that each flat contains separations in no particular order. A single job can
appear on earlier or later flats as long as there is space.
With by separation, page position, job selected, the first three incoming jobs are treated as
before. The black separation in the first job (K1) is placed on the first flat in position 1. The second job
(C2, M2, Y2) creates three new flats (2, 3, and 4). And the third job (M3, Y3) finds space on existing
flats on, magenta flat 3, position 2 and also yellow flat 4, position 2.
The fourth job contains cyan, yellow and black separations, (C4, Y4, K4). Even though there is space
on black flat 1, position 2 for K4, there is no corresponding space in position 2 of flat 3 and flat 4 for
the magenta and yellow plates. This is because this option keeps the separations for each job together.
Therefore, new flats 5, 6 and 7 are created to accommodate (in position 1), the cyan, yellow and black
separations from incoming job 4.
This illustrates that using this option, jobs stay together and appear on consecutive flats.
Incoming Job

by separation, page
position

by separation, page
position, job

Flat
No.

position 1

position 2

position 1

position 2

C1, M1, ‚Äî, ‚Ä
î

C1

C3

C1

‚Äî

Flat 1

‚Äî, M2, Y2, ‚Ä
î

M1

M2

M1

M2

Flat 2

Table 5.6 Media saving‚ example 2

Navigator RIP version 9

User Manual

117

Configuring Output Formats

Incoming Job

C3, M3, Y3, ‚Äî

by separation, page
position

by separation, page
position, job

Flat
No.

‚Äî

Y2

‚Äî

Y2

Flat 3

‚Äî

M3

C3

‚Äî

Flat 4

‚Äî

Y3

M3

‚Äî

Flat 5

‚Äî

‚Äî

Y3

‚Äî

Flat 6

Table 5.6 Media saving‚ example 2

Table 5.6 shows an example where three incoming jobs are placed on flats differently according to the
selection of either; by separation, page position or by separation, page position,
job.
With by separation, page position selected, the first incoming job contains a cyan and
magenta separation (C1, M1) which are placed on flat 1 and 2, position 1. The second job, (M2, Y2)
can use the second position in flat 2 for the magenta and creates a new flat (3) for the yellow. The third
job contains cyan, magenta and yellow separations (C3, M3, Y3).There is space on flat 1 for the cyan
separation, but no space on flats 2 and 3, position 2 for the magenta and yellow. (The yellow cannot go
onto flat 3, position 1 because it would not be in the correct position for registration). Therefore, new
flats (4 and 5) are used and the cyan and magenta separations are placed into position 2.
Again, each flat can contain separations in no particular order. A single job can appear on earlier or
later flats as long as there is space.
With by separation, page position, job selected, the first two jobs behave as before. The
first incoming job contains a cyan and magenta separation (C1, M1) which are placed on flat 1 and 2,
position 1. The second job, (M2, Y2) can use the second position in flat 2 for the magenta and creates
a new flat (3) for the yellow.
The third job contains cyan, magenta and yellow separations (C3, M3, Y3).There is space on flat 1 for
the cyan separation, on flat 1, position 2 but it is not used because the next flats do not have space.
Therefore, new flats (4, 5 and 6) are created and the cyan, magenta and yellow separations are placed
into position 1 on those flats.
This illustrates that using this option, jobs stay together and appear on consecutive flats.

118

User Manual

Navigator RIP version 9

5.16

Media and time saving using optimization

5.15.4 Media Saving dialog box example
The following example of the Media saving dialog box shows a number of flats in various stages of
construction:

Figure 5.14 Example flats

In this example there are three flats in construction: Flat 10 is destined to be output on a Capstan
device and has two jobs called Box.ps and Box1.ps using 67% of the flat. Flat 11 is destined for
output on a Drum device and has three jobs using 20% of the flat. Flat 12 is also destined for output
on a Capstan device but at a different resolution to Flat 10.

5.16 Media and time saving using optimization
The Navigator RIP provides media and time saving options in the Optimization drop-down list in the
Processing section of the Page Setup dialog box. These options are only available if your output
device supports them. If your output device does not support these features, the options will not
appear in the list.
The media saving described in this section is different to the Media saving option described in
Advanced Media Saving on page 112, and does a different job. Using the two options together may
give unpredictable results.
The Optimization drop-down list allows you to instruct the RIP to rotate pages automatically if doing
so saves time or media. For capstan and drum type devices you can choose Media Saving. For drum
type devices you can also choose Time Saving.
If you choose Media Saving in the Optimization drop-down list, the RIP rotates the image if it calculates that media can be saved by doing so. You should ensure that the media width is correctly set
within the Cassette Manager to make this option work effectively. (See Chapter 9, Media Management.) If the current device is a drum recorder, you can choose Time Saving, which rotates the page
in whichever direction takes the least time to output.
Note: Some applications, such as QuarkXPress, generate a page size for the job which is dependent on
the media width set in the application. Media saving often cannot work when processing jobs generated by these applications. To avoid this problem, make the media width in the application the same as
the width of the page being created (including any crop marks which are to be printed).

5.16.1 Other options that save media
Selecting the Trim page check box in the Effects section causes the RIP to trim any white space off the
top and bottom of each page.

Navigator RIP version 9

User Manual

119

Configuring Output Formats

When printing an image which does not contain a PageSize definition (such as an EPS), and also
which is smaller than the currently configured page size, the Trim Page feature will trim the page size
to that of the image size. For example, printing an A5 image to a Page Setup which has A3 defined as
the Page Size would normally result in a roll output device printing onto media A3 in size with an A5
image on it. With Trim Page selected, a roll output device will produce media A5 in size with an A5
image on it. This example illustrates that the amount of media used is considerably reduced.
Note: Trim page will trim to the full size of the image whether or not that image contains white space.
Note: If you are sending output to a device fed with fixed size sheets, such as a typical laser printer,
using Trim page does not save media and is very likely to alter the registration between pages: for
example, when the content of those pages has a variable outline or bounding box.
Several features listed in the Enable Feature drop-down list of the Edit Page Setup dialog box instruct
the RIP to use media as economically as possible. In general, these features pack pages together so
that, for example, more than one page is imaged side by side in the length of media that would otherwise be used by one page. See Features on page 133 for a fuller description.

5.17 Default page size
Normally a job sets its own page size and overrides the default page size. However, in some cases
(such as when using the Proof Fonts command), the RIP uses the default page size.
You can specify the default page size by clicking Page layout (in the Edit Page Setup dialog box) to
display the Page Layout dialog box. You can specify either a standard page size by name, or the absolute page width and height.
If you do not want to use a standard page size using Page size, specify your preferred values in the Page
width and Page height text boxes. Sizes can be in inches, millimeters, picas, or points, depending on the
current selection in the Select units drop-down list to the right of the Page width box. When you have
specified a nonstandard size, the RIP displays Other in the Paper size drop-down list.

5.18 Margins
You can specify margins for a job by clicking Page layout to display the Page Layout dialog box. This
dialog box varies slightly, depending on the type of device. The example in Figure 5.15 is for a sheet
fed device.
You can set the margins by typing values into the appropriate text boxes. Any margins you specify are
added to values set within the job.
Choose the units to use from the Select units drop-down list. When you specify the left margin, the
right margin is calculated automatically, based on the total width of the media and the size of the

120

User Manual

Navigator RIP version 9

5.19

Printing effects

image. If you wish, you can specify a negative value for any margin. For example a -1.0 inch left margin would clip 1 inch off the left hand side of the page.

Figure 5.15 A typical Page Layout dialog box

You can center the page on the media by selecting the relevant option. Note that the page is always
centered if you choose this option, even if the job itself explicitly sets the page width.
If you are using one of the multiple modes, the Page Layout dialog box is also available from the Info
dialog box. This dialog box is displayed when you click Info in the Output Controller (see Operations
on buffered pages on page 65). When chosen from the Output Controller, the page layout options are
specific to the selected page or, optionally, to all pages in the same job. When chosen from the Edit
Page Setup dialog box, the options are applied to all jobs subsequently interpreted with that setup.
The output device dimensions are built into the driver for the current device, and cannot be changed.
You can set the media width in the Cassette Manager. For details of how to use the Cassette Manager
and other media management facilities, see Chapter 9, Media Management.

5.19 Printing effects
The Effects options in the Edit Page Setup dialog box allow you to produce output using assorted
effects.
The dialog box displays a representation of a page (near the Effects label), in which the letters AB are
written. You can either click the Rotate, Negative, and Mirrorprint options to select the effects, or you
can click the Effects page to cycle through all the possible combinations of effects.
The Effects page changes as you select any of the options, illustrating the effects of using the selected
combination.

Navigator RIP version 9

User Manual

121

Configuring Output Formats

The Rotate drop-down list allows you to select 90, 180, and 270
degree rotations. The image itself remains unchanged. If the job
was already set to rotate in the opposite direction, the two rotations
cancel, giving non-rotated output. Similarly, if the job rotates in the
same direction, the two rotations add.
If Negative is selected, the page produced is in negative. If the job
was already in negative (that is, a negative image is defined in the
page description), the two negatives cancel each other out, giving
positive output.
Using this option may affect the proper choice of calibration set‚
see Chapter 12, Calibration.
If Mirrorprint is selected, the RIP produces a mirrored image
which is reflected about the vertical axis. However, if the job being
sent was already reflected, selecting the Mirrorprint option cancels
this out, giving a non-mirrored image.

Eclipse Release SP3 and later of the Navigator RIP includes a Control Strip check box in the Effects panel of the Page Setup dialog
box.
For more information see Control strip below.

5.20 Control strip
If you select this check box, a control strip is added to your job, based on the area available on the output medium. This is particularly helpful when creating proofs, because the control strip indicates the
settings used for the job and allows you to analyze the print quality.
Note: The control strip is not suitable for use when outputting to platesetters.
The control strip includes:


Logos identifying the RIP as a Navigator RIP, including a Global Graphics Software (GGS)
logo.



A color bar for both visual and colorimetric analysis of the print quality.



A text slugline carrying data about the job file itself and the print configuration.

The color bar printed on cut-sheet media may be constructed using one, two or four lines of color
patches, depending on the space available. It may include the following groups of patches:


122

Step wedges, containing different numbers of patches at different tint values. These may contain CMYK or spot colors.

User Manual

Navigator RIP version 9

5.20

Control strip



Graduated linear tints.



Progressives (secondary and tertiary colors built from Cyan, Magenta and Yellow).











Neutral patches comparing CMY combinations with plain Black, and using values from a variety of standardized printing conditions, such as SWOP and ISO 12647-2.
ChipCheck a patent-pending approach that allows the color accuracy of the proof to be tested
quickly and cheaply without requiring the use of a colorimeter.
‚Ñ¢

PDF/X status, showing whether the job being printed is PDF/X compliant or not, and whether
it claims to be.
Orientation, showing the orientation of the page, and whether or not it is saved in negative in
the original document.
Feed direction‚ showing how the output was fed through the printer, as an aid to resolve some
kinds of print artifacts.

Navigator RIP version 9

User Manual

123

Configuring Output Formats

A sample control strip is shown below:
Harlequin Logo

Page orientation
Paper feed
Registration
Paper measurement

Job name
Job style
Page number
Job file name

‚Ñ¢

ChipCheck

File modification date and time

Output device
Print date and time

Resolution
Process step wedges
Page setup name

Color setup name

Screening
Anti-alias factor

Progressives
RIP version
Global Graphics
Software Logo
Serial number

Figure 5.16 Control strip

5.20.1 Control strip elements
The control strip contains some of the following elements, depending on your job configuration and
the available space on your media.

124

User Manual

Navigator RIP version 9

5.20

Control strip

5.20.1.1 Harlequin At Heart logo

Figure 5.17 Harlequin at Heart logo

The Harlequin at Heart logo is always part of a control strip and is located at the left end of the strip.

5.20.1.2 Orientation icon

Figure 5.18 Orientation icon

The orientation icon indicates the orientation of the job, that is, whether the job has been rotated and
so on. It also shows as black on white if the incoming job was negative and forced to positive by the
RIP.

5.20.1.3 Paper feed icon

Figure 5.19 Paper feed icon

The paper feed icon indicates the direction in which the paper is fed through the printer.

5.20.1.4 Registration icon

Figure 5.20 Registration icon

The registration icon allows you to check for any misregistration errors.

Navigator RIP version 9

User Manual

125

Configuring Output Formats

5.20.1.5 Paper measurement icon

Figure 5.21 Paper measurement icon

The paper measurement icon allows you to take a paper white reading for the purposes of calibrating
your measurement device.

5.20.1.6 PDF/X validation icon

Figure 5.22 PDF/X validation icon

When processing a PDF file the PDF/X validation icon will be displayed. If the file claims to be a specific PDF/X version, the RIP will validate that claim during interpretation. The claimed conformance
level will be displayed above the PDF/X validation icon, and the characterized printing condition for
which it was prepared will be displayed below it.
If the file is a valid PDF/X file the icon to the right will be a tick, otherwise a cross will be shown.
A PDF file that does not claim to be PDF/X compliant will show Baseline PDF on the green background.
Files that claim to be PDF/X conformance levels that are not explicitly supported by the RIP will not
be validated, and will show a question mark in the black box to the right.This also applies to files that
claim to comply with a conformance level which are not fully validated in the current Page Setup. For
example, PDF/X files will not be validated if the option in the Accept Type(s) menu of the PDF Options
dialog box has been set to Any PDF <= 1.4 as basic PDF, for instance.

5.20.1.7 ChipCheck strip
‚Ñ¢

Figure 5.23 ChipCheck strip
‚Ñ¢

126

User Manual

Navigator RIP version 9

5.20

Control strip

ChipCheck is designed to allow very rapid and easy validation that a proofer has been correctly configured without requiring the use of instruments. It will identify whether an error has been introduced
by, for example, the wrong media selection in the RIP interface, or whether the required calibration
has not been performed. It can also quickly check whether a stored proof has aged enough to alter the
colors significantly.
‚Ñ¢

To read the strip, compare chips from a valid Pantone Coated swatch book with the patches in the
color bar under appropriately controlled lighting (typically D50).
For even faster and easier checking of proofs, build a strip of Pantone chips in the correct order to
compare with the patches.

5.20.1.8 Process step wedges

Figure 5.24 Process step wedges

The process step wedges allow you to measure the process colors at various increments. The increments used depend on the space available.

5.20.1.9 Progressives strip

Figure 5.25 Progressives strip

The progressives strip allow you to measure color combinations. Each patch has a label above it indicating the colors used in the patch, for example, CM is a patch containing Cyan and Magenta. The percentage of each color varies, according to the space available. For example, the first six patches in the
strip in Figure 5.25 contain 100% of each named color, and the last six patches contain 50% of each
named color.

5.20.1.10 Neutrals strip

Figure 5.26 Neutrals strip

The neutrals strip allows you to test the neutral grays produced by your job settings. The neutral
patches compare CMY combinations with plain Black, and use values from a variety of standardized

Navigator RIP version 9

User Manual

127

Configuring Output Formats

printing conditions, such as SWOP and ISO 12647-2. The appearance of the neutrals strip varies
depending on the space available.
Combined with ChipCheck (see ChipCheck‚Ñ¢ strip on page 126), this provides a very rapid method
of checking the configuration of the proofing device. If the CMY combinations do not match the K
tints you may have selected the wrong media in the RIP, or you may need to recalibrate the printer.

5.20.1.11 Company logo
The company logo always appears on the control strip and represents the distributor of the Navigator
RIP.

5.20.1.12 Job name icon

Figure 5.27 Job name icon

The job name icon precedes the job name.

5.20.1.13 Job style icon

Figure 5.28 Job style icon

The job style icons indicate the separations, screening and color Style used for the job, as specified in
the Page Setup.
The first icon in Figure 5.28 indicates a composite color job; the second icon indicates an unrecombined, preseparated job, and the third icon indicates a recombined, preseparated job (monochrome
jobs will be marked as composite).

128

User Manual

Navigator RIP version 9

5.20

Control strip

5.20.1.14 Page number icon

Figure 5.29 Page number icon

The page number icon precedes the page number. Note that the page number is the page number
within the current file. If for example, you have printed to the PostScript language from your design
application and chosen to print just pages 7 and 8, then they will be labelled as pages 1 and 2 on the
proofs.

5.20.1.15 Job file name icon

Figure 5.30 Job file name icon

The job file name icon precedes the job file name.

5.20.1.16 File modification date icon

Figure 5.31 File modification date icon

The file modification date icon precedes the date and time at which the file was last modified. The file
modification date will only be shown if it is recorded in the file.
Note: The brackets and slashes within the control strip delimit different parts of the strip. The date in
the first set of brackets is the file modification date (if available), and the date in the second set of
brackets is the print date.

5.20.1.17 Print date icon

Figure 5.32 Print date icon

The print date icon precedes the print date and time.

Navigator RIP version 9

User Manual

129

Configuring Output Formats

Note: The brackets and slashes within the control strip delimit different parts of the strip. The date in
the first set of brackets is the file modification date (if available), and the date in the second set of
brackets is the print date.

5.20.1.18 Scale icon

Figure 5.33 Scale icon

The scale icon precedes details of the scale factor, for example, 50.0%.

5.20.1.19 Clipped icon

Figure 5.34 Clipped icon

The clipped icon is a warning that not all of the 'page' of the job may be shown. This may be due to the
fact that the non-printing margins of the output device have not been accounted for. See Margins file
on page 132 for more details.

5.20.1.20 File creator icon

Figure 5.35 File creator icon

The file creator icon precedes the name of the person and/or machine that created the or PDF file.
This information is only displayed if it is recorded in the file.

5.20.1.21 Output device icon

Figure 5.36 Output device icon

The output device icon precedes the name of the output device, for example, TIFF.

130

User Manual

Navigator RIP version 9

5.20

Control strip

5.20.1.22 Page Setup name icon

Figure 5.37 Page Setup name icon

The Page Setup name icon precedes the Page Setup name.

5.20.1.23 Color setup name icon

Figure 5.38 Color setup name icon

The color setup name icon precedes the name of the color setup. If the default color setup is being
used, then the text (No Color Management) is displayed.

5.20.1.24 Screening icon

Figure 5.39 Screening icon

The screening icon precedes details of the type of screening used, for example, HDS Fine.

5.20.1.25 Resolution icon

Figure 5.40 Resolution icon

The resolution icon precedes the resolution details, for example, 300.0 dpi.

Navigator RIP version 9

User Manual

131

Configuring Output Formats

5.20.1.26 Anti-alias factor icon

Figure 5.41 Anti-alias icon

The anti-alias icon precedes the details of the anti-alias factor, for example, 3x3. The Anti-Aliasing
option is available in the Configuration dialog box of various plugins, such as the TIFF plugin.

5.20.1.27 Serial number icon

Figure 5.42 Serial number icon

The serial number icon precedes the Navigator RIP serial number details. This allows you to identify
the Navigator RIP that produced the proof.

5.20.2 Configuration
5.20.2.1 Page image positioning
The page image will normally be placed in the lower left corner of the imageable area of the printer
(after allowance for the control strip). It can be centered in the imageable area in either dimension
using the Center page on Media Width/Length check boxes in the Page Layout dialog box. These
options will not move the control strip, which will remain along one side of the sheet or roll.

5.20.2.2 Margins file
In some cases, the following warning may be displayed in the RIP Monitor window:
%%[ WARNING: Control Strip: no margins file found, output may be clipped ]%%

If necessary, speak to your plugin supplier for further details on margins files.

5.21 Scaling the image
You may not always want to print your job at its original size. The horizontal and vertical scaling
boxes in the Edit Page Setup dialog box allow you to print out any job at a specified scale. This
changes the page size.
All scales are expressed as a percentage of the original size. Thus, to print out a copy of a job at half
the linear size, specify 50 in both the horizontal and vertical scaling text boxes. To print it out at twice
the size, specify 200.

132

User Manual

Navigator RIP version 9

5.22

Features

You can specify different horizontal and vertical scales if you wish. Note that the aspect ratio of the
image changes unless the values in the horizontal and vertical scaling boxes are the same.
Screen ruling is not affected by the scale at which a job is output.

5.22 Features
You may sometimes want to apply a special effect to your jobs that is not otherwise available from the
Edit Page Setup dialog box. You can do this in the Navigator RIP by using features. These are both
powerful and easy to use.
For instance, you can use a feature to perform a simple page imposition that prints two pages side by
side (and at reduced-scale if required) on one normal sized page to reduce media consumption when in
the draft stages of document production. Another feature scans PostScript language jobs for the use of
spot colors and reports the colors on screen before you print.
You can use features by choosing one from a drop-down list, without knowing how they work, but
with a little knowledge you can add new features. A Navigator RIP feature is a fragment of PostScript
language code which is executed just before a job is run. The fragment specifies the changes to be
made to the interpretation of that job, but is completely independent of it.

5.22.1 Using features
Several page features are supplied with the RIP, ready for immediate use. To use one of these features,
select the Enable Feature check box and select a feature from the drop-down list. Make any other settings you wish and save the Page Setup. The feature is applied to all jobs using that Page Setup until
you clear the check box.
Many of the features enable you to save media by packing pages on large format devices, or to get
more information about jobs and any errors arising from jobs. In addition, one feature (Image
replacement) enables substitution of high resolution images for PostScript language jobs, using
Open Prepress Interface (OPI) and Desktop Color Separation (DCS) schemes.
The page features currently supplied and supported are:
Error Handler (Long and Short)
Error messages generated by the RIP are generally fairly concise. These page
features make the RIP generate longer and shorter (but longer than normal)
error messages.
Image Replacement
This will load both OPI and DCS image replacement code. Please note that
there is an issue when using image replacement with DCS files. When a
Monochrome color separation setup is employed, only the information from
the Black DCS separation is used in the final grayscale image.

Navigator RIP version 9

User Manual

133

Configuring Output Formats

List Spot Colors
This lists to the system monitor / console the names of all the spot colors
accessible in the current job. Also loads the level 1 separator so all level 1
spot colors are also displayed.
For maximum performance, when using this page feature, set the resolution
to the lowest possible value that is supported by the output device.
Print info on error
Use this to add additional information related to PostScript language errors to
the output, and to image the page interpreted so far.
Print page on error
Use this file as a page feature (or a boot option in HqnOEM) to print partial
pages when a PostScript language error other than interrupt or timeout
occurs.
Install Annotation
You can if you wish use your own custom annotation files. This is done using
this page feature which, when activated via the Page Setup dialog, allows you
to print an EPS file (EPS only), to install that file as a new annotation.It is
recommended that the EPS file is wide and low. It will be centered on the
selected raster edge. For more information see Annotations on page 274.
Use Filename as Jobname
This page feature allows users to request that an incoming file name be used
for the job name. This page feature is a much cleaner approach than any previously supplied code. It is therefore is highly recommended that this page
feature is used rather than any previous code offerings.
Note: Each page feature is a simple text file and contains a similar description, sometimes with more
detail, as a comment.

5.22.2 Adding other features
The Enable Feature list provides a number of commonly useful features, but there are other supplied
examples that you can add to the list and a PostScript language programmer can create many more.
One of the supplied examples (Draft) prints the word Draft on each page. Another one (Pack Drum)
saves film by packing images on a drum recorder in the way that Fill Film does on a sheet-fed
device and Pack Capstan does on a capstan recorder. Finally, PGB hot folder enables you to
resubmit page buffers to the version of the RIP that produced them.
Note: All page features in the Examples folder are supplied as an illustration of what is possible with
the Navigator RIP. The page features are believed to work as described but they are not supported as a
part of the Navigator RIP. Page features that appear in the Enable Feature list are supported but are
documented only in the PostScript language files.

134

User Manual

Navigator RIP version 9

5.23 Cassette management

A feature appears in the Enable Feature list only if there is a corresponding PostScript language file in
the Page Features folder in the SW folder where you have installed the RIP. The name of the feature
in the dialog box is the same as the file name.
All the other supplied examples are files in an Examples folder in the Page Features folder. There
is also a file called Read Me that describes the example features and how to create others. To make an
example feature available, copy the file from Examples into the enclosing Page Features folder
and display the Edit Page Setup dialog box.
Similarly, to remove a feature, move it from the Page Features folder into the Examples folder.
You can add other, new, features by creating appropriate PostScript language files and placing them in
the Page Features folder.

5.23 Cassette management
If you are using the media management facilities to keep track of the amount of media you have left in
your output devices, or if you are using media optimization, you must specify the cassette which is to
be used with the Page Setup. Do this using the Cassette drop-down list in the Edit Page Setup dialog
box. Note that if you change the Device, you have to choose a cassette name from the Cassette list,
unless media management is disabled for that device.
See Chapter 9, Media Management, for more details.

5.24 Page Setup Options
The Page Setup Options dialog box, shown in Figure 5.43, provides several options that affect the way
the RIP processes jobs. Display this dialog box by clicking the Options button in the Edit Page Setup
dialog box.
Several options provide compatibility with jobs using PostScript LanguageLevel 2 or
LanguageLevel 1. Other options deal with more general fault conditions or are convenience features.

Navigator RIP version 9

User Manual

135

Configuring Output Formats

(Click the Extras button in this dialog box to see options specific to job-creating applications: see Page
Setup Option Extras on page 140 for details.) This section describes each option in the dialog box.

Figure 5.43 Page Setup Options dialog box

5.24.1 PostScript language compatibility level
This option allows you to choose the level of PostScript language compatibility for jobs submitted to
this Page Setup. You can choose PostScript LanguageLevel 1, 2, or 3.
By default, this option is set to 3, because most jobs run correctly and this setting allows the RIP to
use the maximum number of PostScript language features and Navigator RIP extensions. The result is
often faster operation or increased output quality.
You may need to set the value to 1 or 2 for a small number of older jobs to run correctly. For example:
if you set this option to 2, the RIP interprets jobs using the Level 2 PostScript language conventions,
together with any non-conflicting Navigator extensions. This means that level 2 jobs run in exactly the
expected environment. Well-constructed level 3 jobs also run but are likely to operate more slowly if
they use features better supported in LanguageLevel 3.

5.24.2 Run prep at start of job
Prep files are libraries of PostScript language routines that can be downloaded into a RIP and used
whenever necessary. Many LaserWriter drivers require certain libraries to be loaded before they can
be used. See Automatic prep loading on page 186, for details.
If the box for this option is selected and a prep file chosen from the drop-down list, the chosen prep
file is run at the start of every job that is interpreted with the relevant Page Setup.
By default, this option is not selected.

136

User Manual

Navigator RIP version 9

5.24

Page Setup Options

5.24.3 Remove color operators
This option also provides PostScript language compatibility. There are two cases where you should
consider using it.




One case occurs because of a bug in LaserWriter Driver 6.0. If you are using this driver and get
a PostScript language error, especially if the sending application is Freehand (formerly from
Aldus, now Macromedia), then select this option and output the job again.
Some applications use PostScript language Level 1 extended color operators incorrectly, producing incorrect (for example, blank) output. If you select this option, the RIP uses basic color
operators instead, and output appears correctly.

Note: This option is available only when the PostScript Language compatibility level option is set to 1.
Color operators are always available in PostScript LanguageLevel 2 and 3.

5.24.4 Fast patterns
This option enables Level 1 PostScript patterns defined as halftone screens to be processed more
quickly, but at a lower resolution than normal. You should not use this option if you require high quality images, since the option makes the output of any user defined patterns have a more grainy texture
than normal at resolutions above 300 dpi.
By default, this option is not selected.

5.24.5 Emulate old imagemask behavior
This option is used to overcome a now rarely seen bug in a previous version of the Adobe interpreter.
The effects of this bug may still be present in some older files of PostScript language code.
By selecting the Emulate old imagemask behavior check box, you can print these old jobs correctly.
By default, this option is not selected.
Consider the case where a page of PostScript language code contains a negative image mask. If the
page is itself printed in negative, the image mask
appears normal, as illustrated on the left.

In older jobs, negative image masks are still
printed in negative, producing the error illustrated
on the left. This is because the PostScript language
code in the job is attempting to rectify a bug that is
no longer present.

Navigator RIP version 9

User Manual

137

Configuring Output Formats

5.24.6 Add showpage at end of job if necessary
Certain PostScript language file formats, such as EPS, EPSF, or EPSI (all forms of encapsulated
PostScript), do not necessarily include a showpage operator at the end of the job. To print these files
directly from a RIP, a showpage may need to be added. If this option is selected, the RIP automatically appends a showpage to jobs when necessary.
Note: If a job containing a PostScript language error is aborted, any partially complete page is processed and output.
Note: With Simple Imposition used in your Page Setup the Add Showpage at end of job if necessary
option is not required. EPS files will print correctly.
By default, this option is not selected.
Note: If you process an EPS file that contains known errors it will output when using both Add Showpage at end of job if necessary and a page feature that uses imposition. If either the Add Showpage at end
of job if necessary or page feature is turned off the page will correctly error.

5.24.7 Abort if calibration on, and the selected cal set does not match job
If you require job calibration, select this option to prevent the RIP printing jobs with an inappropriate
calibration set. The calibration set is specified in the Page Setup. See Chapter 12, Calibration for
details.
By default, this option is not selected.

5.24.8 Abort the job if any fonts are missing
Select this option to ensure that a job is aborted if any font it uses is not available. If you leave this
option unselected, the RIP attempts to use a suitable replacement for any missing font.
By default, this option is not selected.
You are able to specify Default fonts in the SW/Config/FontSubstitution file. See Font substitution on page 295 for more details.

5.24.9 Enable font emulation
If a font is missing from a job, and is not available in the RIP, you can select this option to substitute
the missing font with suitable facsimile text based on the characteristics of the missing font in terms of
style, spacing, height and width. In this way, a suitable readable font with similar characteristics of the
target font is used in place of a missing font.
Font emulation is often acceptable when digital printing, and can be preferable to the file not being
produced at all.
For more information see Font Emulation on page 297.

138

User Manual

Navigator RIP version 9

5.24

Page Setup Options

5.24.10 Preserve monochrome and preseparated jobs
Select this option only if it is important to emulate the behavior of a traditional separating workflow
when a monochrome or preseparated job is submitted to the RIP using a Page Setup that is intended
for automatic separation of composite color jobs.
When this checkbox is enabled you will generate CMYK separated output when monochrome or preseparated files are input to a CMYK page setup.
Selecting this option ensures that the RIP generates correctly labeled separations. Select this option to
make monochrome jobs produce a single black separation, and to make preseparated color jobs produce correctly labeled separations.(Even though correctly labeled, the separations may also be blank.)
Note: You can avoid blank separations by selecting Not Blank in the Print column of the Edit Style
dialog box, as described in Producing separations on page 349. That option is slightly different
because if it is used alone on preseparated jobs in a separating workflow then the resultant separation
may have the wrong label: for example, a preseparated job for CMYK may produce only four K
(black) separations. It can be useful to use both options together.
Warning: When Simple Imposition is being used, the Print option must be set to Yes if you wish to
see color patches on either the proofing or the plate colorbars. Using the Not Blank option will omit
color patches for that color.

5.24.11 Number of copies to print
This text box contains the number of copies of a job that are to be printed. You can type a new value
into the box to specify a particular number of copies.
By default, this option is set to 1 (one).

5.24.12 Minimum shaded fill levels
With the introduction of PostScript LanguageLevel 3 and PDF version 1.3, it is possible to construct
vignettes using Shaded Fills. There are a number of controls available to impact the quality of these
Shaded Fills and one which is particularly important is the smoothness setting.
This option essentially controls the number of steps used to produce a vignette. Some applications set
smoothness to a value which will not produce good results on some devices (Adobe Acrobat sets a
value of 50). In this case, vignettes are constructed in a way which reveals noticeable banding. Typically, the creating application can be set to use a more sensible default value, however this can be difficult to implement for all creators of PDF files. For this reason the Minimum shaded fill levels option is
available.
This option allows you to set sensible override values.
Minimum shaded fill levels sets a limit which controls the minimum number of steps that can be used in
constructing a vignette. This is important in ensuring vignettes do not have banding.

From Eclipse Release SP4 the default Minimum shaded fill levels value is Auto which optimizes the
value to suit the currently selected Page Setup, and in particular the screening setting.

Navigator RIP version 9

User Manual

139

Configuring Output Formats

The Minimum shaded fill levels option has a drop down menu allowing selection of various pre-configured values. The higher the value you select, the more shaded fill levels are created, and the more
work the RIP has to do to create those levels, resulting in reduced output rate. If Auto is selected, the
RIP automatically optimizes the Minimum shaded fill levels to suit the current Page Setup. For example,
if the current Page Setup employs screening that allows only 64 shades of gray, the RIP will optimize
the Minimum shaded fill levels so that it uses only 64 shades. In addition to this, if the Page Setup
allowed 256 shades you can make the RIP run faster by manually selecting a lower value, such as 128.

5.25 Page Setup Option Extras
The Page Setup Option Extras dialog box, shown in Figure 5.44, enables you to alter the way the RIP
processes jobs produced by specific applications. The topics include color management, font substitution, and vignettes in spot colors.
Note: The treatment of embedded color management and spot color vignettes is the same whether the
job submitted to the RIP is a file produced directly by the named application, or a file produced by a
page make-up application and referencing or containing a file from the named application. There are
differences in what is possible with different file formats from some applications, as noted for each
option. Typically, an EPS file is handled better than a PostScript language file printed directly from the
named application.
Display this dialog box by clicking the Extras button in the Page Setup Options dialog box. This section describes each option in the dialog box.

Figure 5.44 Page Setup Option Extras dialog box

5.25.1 Adobe Photoshop features
These options control handling of features found in jobs from Adobe Photoshop.
Note: The Honor PostScript Color Management check box has been removed. The option is now
called Override color management in job and is part of the Input Document Controls within the
Color Setup Manager. See Color Setup on page 354 for more details.
To make fullest use of jobs containing device-independent color definitions, enable a color
option in the Configure RIP Extras dialog box.

140

User Manual

Navigator RIP version 9

5.25

Page Setup Option Extras

Separate spot color duotones, tritones & quadtones to spot color plates...

This option enables the interception of Photoshop duotones, tritones, and
quadtones when encountered in EPS files. Select this box if you want to separate spot color duotones, tritones, and quadtones to spot color separations.
For this option to take effect, select a RIP separations style that creates separations and that enables the relevant spot color separations. The separations
style must either specify a separation for each spot color or have (Other
colors in job) set to Yes. See Producing separations on page 349 for
details.
Note: This option is available only when the PostScript Language compatibility
level option is set to 3. It is only relevant for Photoshop versions 2.5
through 4; Photoshop version 5 does this automatically if imaged in
LanguageLevel 3.
For more information see Duotones, tritones, and quadtones on page 12
By default, this option is selected.

5.25.2 Adobe Illustrator features
These options control handling of features found in jobs from Adobe Illustrator.
Don’t let files silently substitute Courier for missing fonts

Illustrator 7 checks for font availability and replaces any unavailable fonts
with Courier. This means that changing the default font or selecting the Abort
the job if any fonts are missing option in the RIP would have no effect.
If you select this option, the RIP ignores the font substitution in the Illustrator
PostScript language code. You can then change the default font or select the
Abort the job if any fonts are missing option. This options applies to both PostScript language and EPS files from Illustrator.
By default, this option is selected.
Separate spot color vignettes to the spot color plate...

For both Illustrator 6 and 7 files: if you select this option, the RIP places the
spot color vignettes on the appropriate spot color separations, if available.
There are limitations: all vignettes appear in process separations when the job
submitted to the RIP is a PostScript language file printed directly from Illustrator; and vignettes from a spot color to a process color appear in process
separations even when the job is in EPS format.
For this option to take effect, select a RIP separations style that creates separations and that enables the relevant spot color separations. The separations
style must either specify a separation for each spot color or have (Other
colors in job) set to Yes. See Producing separations on page 349 for
details.

Navigator RIP version 9

User Manual

141

Configuring Output Formats

For Illustrator 6 files: if you do not select this option, the RIP honors the
information in the job and places spot color vignettes on the process color
separations rather than the spot color separations.
For Illustrator 7 files: if you do not select this option, the result depends on
the separations style and on the information in the job.
If the separations style generates a separation for a particular spot color, the
RIP places a vignette in that spot color on the spot color separation.
However, if (Other colors in job) is set to Yes the RIP will generate
a separation for a spot color if it encounters a flat tint in that color, but not if it
encounters a vignette in that color. Once the spot color separation exists, the
RIP will add a vignette in that color to the separation. If the spot color separation does not already exist, the RIP places the spot color vignette on the process color separations.
Note: This option is available only when the PostScript Language compatibility
level option is set to 3.
By default, this option is selected.

5.25.3 QuarkXPress features
This option controls handling of features found in jobs from QuarkXPress.
Separate spot color vignettes to the spot color plate...

The PostScript language code generated by QuarkXPress places spot color
vignettes on the process color separations rather than the spot color separations.
If you select this option, the RIP places the spot color vignettes on the appropriate spot color separations, if available. (This option applies fully to PostScript language files printed from QuarkXPress.) For this option to take
effect, select a RIP separations style that creates separations and that enables
the relevant spot color separations. The separations style must either specify a
separation for each spot color or have (Other colors in job) set to Yes.
See Producing separations on page 349 for details.
Note: This option is available only when the PostScript Language compatibility
level option is set to 3.
By default, this option is selected.
Replace XPress graduated fills with smooth shading 

Select this check box to replace graduated fills produced by QuarkXPress
with LanguageLevel 3 smooth shading (shaded fills). Shaded fills generally
produce better visual quality and may be faster to generate. You can use this
selection if you are using the TrapPro trapping option. This is because
TrapPro can handle shaded fills.
Note: This option is available only when the PostScript Language compatibility
level option is set to 3.

142

User Manual

Navigator RIP version 9

5.26

PDF Options

By default, this option is not selected.

5.26 PDF Options
This button displays the PDF Options dialog box, in which you can set the options for printing PDF
files. Using these options you can, for example, print a range of pages rather than the whole file or
specify which versions of PDF file to accept. You can also supply a user password, to enable the RIP
to print password-encrypted files.

5.27 Calibration
The Navigator RIP can apply one or more calibration sets to a job. If you are printing to a direct output
device, the Page Setup can include a calibration for the output device and a tone curve calibration.
If you are preparing a job for a printing press, the Page Setup can include an imagesetter calibration, a
tone curve calibration, and calibrations for the intended and actual presses. If the Page Setup uses an
ColorPro color setup, the intended press calibration is disabled.
Calibration sets are created for a particular device and color space. You can only select a calibration
set for the currently selected device and color space. The choice of separations style determines the
color space. Note that, while an imagesetter is not a multi-color device, you can create a calibration
curve for each color in the separations style, to take account of the different screen angles likely to be
used for the colors.
To create or edit a calibration set, click the Calibration Manager button, which is the icon button in the
Calibration & Dot Gain section of the Edit Page Setup dialog box. See Chapter 12, Calibration, for
more information.

5.27.1 Device calibration
The Calibration drop-down list contains a list of all calibration sets for the currently selected device
and color space. Select (None) for no device calibration.
Typically, you select a calibration set that has been prepared for the resolution, screen frequency, dot
shape, positive/negative setting, and exposure of the Page Setup that you are editing. The dot shape
and screening details are set in the separations style.
Some output plugins, for example ProofReady plugins, are supplied with reference calibration profiles, typically named in this form: (Media_name Resolution), where Media_name and
Resolution represent values suitable for the output device. These profiles appear in the list of calibration sets and you can use these profiles in the same way as any other calibration set. The additional
feature of these profiles is that selecting a reference calibration profile, or a calibration set that you
have based upon one, is enough to apply a default color management setup provided that you have
enabled an color management option. See the manual for the relevant output plugin or the ColorPro
User Guide for details.

Navigator RIP version 9

User Manual

143

Configuring Output Formats

5.27.2 Press calibration
The Actual Press drop-down list contains a list of all calibration sets created for the Printing Press
device in the current color space. Select (None) for no press calibration. There is default entry supplied for (SWOP (CGATS TR001)), and there may be others.
Note: Some of the press calibration sets may be derived from profiles when you are using ColorPro.
See the ColorPro User Guide for details. You can add other entries, as described in Chapter 12, Calibration.

5.27.3 Use of a different printing press
If you are not using ColorPro, you can retarget a job from its intended printing press to another printing press, using the Intended Press option.
This is a complex topic in the general case, discussed more fully with reference to calibration in Press
calibration on page 318.
In summary, the overall effect of press calibration in the output path is to first apply any primary calibration (for example, as required for an imagesetter), to remove compensation for the gain of the
Intended Press, and then to compensate for the gain of the Actual Press.
The Intended Press calibration is not available when ColorPro is enabled. Instead, several options are
provided for processing color data ahead of the transfer to press. These options include emulating the
output of one press on another type of press. For details, see the separate ColorPro User Guide. The
calibration set specified in Actual Press is always used.
The Intended Press drop-down list contains a list of all calibration sets created for the Printing
Press device in the current color space. If you have a scanned image that was not aimed at a specific
press, select (None) for no intended press calibration. There is a default entry supplied for (SWOP
(CGATS TR001)), and there may be others.
Note: Some of the press calibration sets may be derived from profiles when you are using ColorPro.
See the ColorPro User Guide for details. You can add other entries, as described in Chapter 12, Calibration.

5.27.4 Tone curves
Tone Curves allow you to make another set of color adjustments, in addition to the device calibration
and the press calibration. The Tone Curves drop-down list contains a list of all calibration sets created
for the Tone Curves device in the current color space. Select None for no tone curves calibration.
See Tone curves on page 317 for more details.

144

User Manual

Navigator RIP version 9

5.28

XPS Options

5.28 XPS Options
This button displays the XPS Options dialog box, in which you can set the options for printing XPS
files.

Figure 5.45 XPS Options dialog box
Honor PrintTicket page range

Switching this on enables the RIP to act on the page range settings in the XPS
PrintTicket. Leaving the option unchecked means that Page Setup options
continue to override the XPS Document PrintTicket settings.
Print all pages

Leave this check box selected to print all the pages in the XPS Document. If
you wish to print only a subset of the pages from an XPS Document, deselect
this check box and enter the desired pages in the Pages field.
Reselect this check box when you have finished printing the subset of pages.
This enables the printing of all pages from other XPS Documents. (You do
not need to delete the entry in the Pages field.)
Page(s)

Enter numbers for the page or pages that you wish to print. You can enter
individual page numbers or ranges, separating each number or range with a
comma ( , ) character.
To enter a page range, enter the numbers of the first and last pages in the
range, using a hyphen to separate them: for example, 7-16. If you wish to
print all pages from a particular page to the end of the job, enter a range starting with that particular page and ending with a number that you know to be
higher than the last page in the PDF job: for example, 47-10000.
You can combine individual page numbers and ranges: for example, 1,2,716,23,24.
Pages may be repeated, for example [27, 27, 27] will print three copies of
page 27.
Pages may be listed out of sequence, for example [154, 27, 170].

Navigator RIP version 9

User Manual

145

Configuring Output Formats

Page size

This enables the RIP to act on page size settings configured in the Page Setup
dialog or XPS Document PrintTicket. The default setting is to use the Page
Setup FixedPage width and height. Alternatively, the BleedBox or
ContentBox settings can be selected. You can override the Page Setup values by selecting the PrintTicket PageMediaSize setting.
Blend color space

Selects the blend color space from sRGB, scRGB, the Device blend color
space or uses the XPS Document PrintTicket PageBlendColorSpace
setting. All colors are converted to the selected blend space before compositing or gradient blending. If your RIP is outputting an RGB device select
sRGB. If your RIP is outputting to a CMYK device select Device.

5.28.1 PrintTickets
The PrintTickets attached to an XPS Document help to define the various printing options such as the
Print quality and Paper size. Also, other options such as the Output method and what to do with Digital Signatures can be selected. Many applications will attach a PrintTicket to the XPS Document when
it is printed.
The following PrintTickets are supported by the RIP if they are present within an XPS Document:


DocumentPageRanges



PageBlendColorSpace



PageMediaSize



PageResolution

The way that the RIP handles the DocumentPageRanges, PageBlendColorSpace and PageMediaSize PrintTicket keys depends on the settings of the XPS Options dialog. See XPS Options on
page 145 for more information. By default, all PrintTicket settings are ignored, but these three keys
can be honoured if you choose to do so.
The only other PrintTicket setting which might get honoured is PageResolution. This will only
happen when the Override resolution in job option is not checked in the Page Setup dialog. See Setting
the resolution on page 80 for more information.

146

User Manual

Navigator RIP version 9

6
Screening
This chapter describes halftone screening in monochrome and color work, and the different types of
screening offered by the RIP. You use the screening options in the RIP in combination with the options
that control color separations, to create a combined color separations style.
The RIP does not restrict the concept of color separation to producing separated output. When processing any job, the RIP creates a separation for each process colorant and also, where appropriate, for
spot colorants. The output format determines whether the separations are printed together as a composite, or separated. By configuring these separations you can control the printing of individual colorants in the job. Although there is only one separation in the monochrome color space, the RIP
provides the same options for configuring that separation.
Separations information is saved together with screening information in a separations style, which can
be used in several Page Setups. You can keep a number of separations styles that you use regularly, for
example to define different screening options.

6.1 Managing separations styles
Separations styles are created and managed in the Separations Manager, as shown in Figure 6.1. You
can open the Separations Manager by clicking the Separations Manager icon button next to the Style
drop-down list in the Edit Page Setup dialog box, or by choosing the Color > Separations Manager command.

6.2 Separations Manager dialog box

Figure 6.1 Separations Manager dialog box

Navigator RIP version 9

User Manual

147

Screening

The Separations Manager displays a list of all existing separations styles for the current device, showing the name of each separations style, the corresponding color space, and the output format.
From the Separations Manager you can create separations styles, and edit, copy, or delete existing separations styles. This chapter describes how to set the screening options for an existing separations
style. For details about creating separations styles, see Chapter 13, Color Separation.
Select a separations style from the list and click Edit. The Edit Style dialog box appears. If the output
format of the separations style supports screening, the Edit Style dialog box contains screening
options, as shown in Figure 6.2. For example, if you choose a separation style with an output format of
halftone separations, the Edit Style dialog box contains screening options.
The screening options do not appear if the output plugin for the selected output device does not support screening. This usually means that the output device supports continuous tone (contone) output or
that the device accepts contone data and performs its own screening. For devices that can be configured to support either contone or screened output, the screening options in the Edit Style dialog box do
not appear when you select a contone separations style, unless you are using external screening.
Some proofing output plugins list two entries (for Device in the Edit Page Setup dialog box) for each
model of printer that the plugin supports. One entry is for a device that uses the screening options in
the RIP, which appear in the Edit Style dialog box for that device. The second device performs its own
screening, such as error diffusion screening (EDS), and does not have screening options in the Edit
Style dialog box.

148

User Manual

Navigator RIP version 9

6.3 Edit Style dialog box

6.3 Edit Style dialog box
The Edit Style dialog box (shown in Figure 6.2) appears when you select a separations style and click
Edit in the Separations Manager.

Figure 6.2 Edit Style dialog box with screening options

The screening options in the Edit Style dialog box include some familiar to anyone who has used
screening and some that are specific to the Navigator RIP.






Halftoning on page 149, is a quick introduction to concepts if you are unfamiliar with screening and halftoning.
Screen angles on page 154, Dot shapes on page 156, and Halftone frequency on page 159,
explain how to use three basic screening functions.
Screening options and number of gray levels on page 159 describes an area where the Navigator RIP technology provides some unconventional and valuable functionality.

The remaining sections in this chapter describe more subtle controls and some optional features of the
Navigator RIP.

6.4 Halftoning
Halftoning is the process of approximating gray levels or color shades with a pattern of dots. In many
halftoning systems, the dots can have only one color value but can vary in size to alter the ratio of dot
color to background color. The simplest use of this technique is approximating gray levels with a pattern of black dots against a white background, as illustrated in Figure 6.3.

Navigator RIP version 9

User Manual

149

Screening

Here, the size of the dots varies to represent different shades of gray. You see an area of small dots as
a light gray, while an area of larger dots (each nearly filling its allowed space in the pattern of dots) is
seen as dark gray. More strictly, it is not the size of the dots but the resultant ratio of black area to
white area that represents the gray value.

Figure 6.3 An example of halftoning

Color shades are approximated with three patterns of dots, each in a primary color‚ cyan, magenta,
and yellow‚ used with or without a fourth pattern of black dots. (This description of halftoning
assumes three patterns‚ in fact, the fourth pattern of black dots is almost always used, for technical
reasons that do not affect the principles of halftoning.)
Within each color separation, the size of the dots (in relation to their background) is proportional to
the amount of the primary color in the composite shade. When the separations are combined, typically
by overprinting in registration, they create the illusion of shades of color. The cyan, magenta, and yellow dots cannot be distinguished when viewed from a distance‚ instead, the pattern of color dots
appears to be an area of a shade of color.

6.4.1 Dots, halftone cells, and screens
The dots that this section has discussed are the visible part of halftoning and most halftoning can be
described in terms of patterns of these dots. The industry-standard terms used to describe the organization of these dots into manageable structures are halftone cells and screens.
Each dot is considered to occupy a halftone cell. (Figure 6.4 shows two groups of four halftone cells.)
Every halftone cell is used to represent a gray level or color intensity. A dot can have any area in the
range 0% of the area of the halftone cell (a completely white cell) through 100% of the area of the
halftone cell (a completely black cell). Dots of intermediate areas create the illusion of gray levels.

150

User Manual

Navigator RIP version 9

6.4

Halftoning

The number of pixels in the halftone cell defines how many intermediate areas of dot are possible and,
in most systems, this defines the number of reproducible grays.
Cell spacing (related
to screen frequency)

Figure 6.4 Halftone cells, screen frequency, and dot shapes

A screen is an invisible grid that is superimposed on the image‚ each square in the grid is a halftone
cell. For a particular dot shape, the important characteristics of a screen are its spatial resolution,
referred to as screen frequency, and the screen angle (as shown in Figure 6.5).
Screen frequency
is the number of halftone cells per inch or centimeter. The corresponding
units are lines per inch (lpi), lines per centimeter (lpcm), or lines per millimeter (lpmm). For example, a screen frequency of 100 lpi means halftone cells
spaced every hundredth of an inch.
Screen angle

is the angle between one side of the halftone cell and an axis on the output
device (not a fixed axis on the page): the reference axis is usually the direction of the slow scan. The screen angle becomes important when you are
combining the separate patterns of dots used for color reproduction. The most
important consideration is the angular separation of the different screens, not
their absolute angles relative to the device axes.
Note: For most screens, you can use the box Rotate screens according to page
rotation in the Edit Style dialog box to maintain screen angles relative to the
page axes. This may help you diagnose the cause of problems with patterning
in the output.


0
Screen angle

Ðó

270

Ðó

90

Ðó

180

Figure 6.5 Halftone cells and screen angle

Navigator RIP version 9

User Manual

151

Screening

6.4.2 Dot shape
The choice of the shape of each dot that is generated in a halftoned image is essential to the quality of
the eventual image. Figure 6.4 shows circular and elliptical dots, but dots can have other shapes and
need not even form a connected shape within the halftone cell. Indeed, there are screens where the
black pixels are distributed (dispersed) around the halftone cell without being joined into one dot. The
way in which pixels are produced physically makes it difficult to manage dispersed pixels, though
Harlequin Dispersed Screening (HDS) exploits this effectively to produce a less prominent pattern in
the output.
There are two common ways of producing dot shapes: spot function screens and threshold screens.
Both kinds of halftone work by telling the RIP which pixel within a screen cell to mark next to obtain
the next darker gray level.
The Navigator RIP supports all the screen types defined by The PostScript Language Reference Manual (2nd Ed) and the non-proprietary types added in The PostScript Language Reference (3rd Edition). This means support for HalftoneType values of 1 through 6, 10, and 16.
Note: If you create a Separations style using Eclipse Release SP1, and you decide to change the Dot
Shape used, if both the original and new Dot Shapes are genuine Spot Functions (such as changing
from Euclidean to Square), the screening settings remain as set, that is, they are not reset to the default
values.
If however, either or both the original or new Dot Shapes are a Halftone Dot Shape (such as an HDS
dot shape), the screening settings, such as the screen angles, and the Yes/No Print? values are reset to
their defaults. The default values are defined in the Screen Names file.
Note: Screen Names files created with the Eclipse Release or later RIPs are incompatible with previous versions. That is, you cannot transfer a Screen Names file from pre Eclipse Release RIPs to
Eclipse Release or later RIPs.

6.4.3 Spot function screens
Spot functions describe the dot shape using a mathematical function which, given the position of a
pixel within a halftone cell, produces a number which says where in the sequence of pixels that pixel
should be marked. This technique is very flexible, because it allows a single function to define a halftone cell at any size or angle.
In the Navigator RIP the common dot shapes are provided by spot function screens. This means that
all the screening options in the Edit Style dialog box are available, including the benefits of using Harlequin Precision Screening (HPS).

6.4.4 Threshold screens
As an alternative to a spot function screen, a threshold screen describes a halftone to the Navigator
RIP by providing the order in which to mark pixels explicitly in a table. The table has as many entries
as there are pixels in the halftone cell.
A consequence of this is that a threshold screen is always defined in terms of a fixed cell size in pixels,
whereas a spot function can be applied to arbitrary sizes of screen dot. This means that the screen cell
for a spot function will occupy more pixels, but the same physical area on the output, if either the res-

152

User Manual

Navigator RIP version 9

6.4

Halftoning

olution is increased or the frequency (number of halftone cells per device independent unit distance)
decreased, but a threshold screen will get physically smaller and its frequency increase if the resolution is increased.
A further consequence is that HPS and other techniques which vary the actual pixels of a screen cell
cannot be applied to threshold screens. On the other hand, threshold screens can be controlled very
precisely, pixel for pixel, and are therefore suitable for describing Frequency Modulated (FM) screens
if the cell is large enough. While threshold screens can be used to describe conventional, clumped
dots, they are less flexible because of their resolution dependence and absence of rotation to a specified angle (at least in their simplest form). Neither kind of screen is suitable for describing non-tessellating screening techniques, such as error diffusion.
The PostScript language offers several variations on threshold screens, which allow greater or lesser
control over the sizes of the tables involved and the tessellation of the tiles (equivalent to the angle) in
a spot function.
There are no threshold screens in the standard set supplied with the RIP but it is possible to use threshold screens embedded in a job, or installed in the RIP by your supplier.

6.4.4.1 Using threshold screens
In the Edit Style dialog box, when you have selected a threshold screen in the Dot shape list and Override dot shape in job is selected, the following options are not available:


Frequency



Override frequency in job



Angles (for all process and spot colors)



Override angles in job



Use Harlequin Precision Screening



Rotate screens according to page rotation

Note: If you clear the Override dot shape in job check box, these options are enabled, so that you can
override some parameters of spot function screens supplied in the job.
For more details of these options, see Section 6.5 through Section 6.7, and Section 6.10.

6.4.5 Halftone options
The Navigator RIP provides a number of options to control halftone generation. Using them appropriately can improve the quality of your image, depending on the output device, media, and resolution
used. You can also override any screening parameters that might be specified within the page description itself.
These are the three main features that are affected by the halftone strategy you choose:



The shape of the dots created. See Dot shapes on page 156, for the relevant controls.
The frequency and angle of the dot pattern created. See Halftone frequency on page 159, for
the relevant controls.

Navigator RIP version 9

User Manual

153

Screening



The accuracy of the screens generated. There is no general way of controlling accuracy. One
way of getting good accuracy is to use Harlequin Precision Screening (HPS), described in Harlequin Precision Screening on page 164.

6.4.6 Dot gain
When a halftone image is printed, the ink used to create each dot tends to flow outwards as it is
absorbed by the paper. This phenomenon is known as dot gain. Similarly, dots printed on a laser
printer tend to spread outward when the toner is bonded to the paper. As a result, any printed dot tends
to be larger than the calculated dot size.
Dot gain can affect the quality of printed images. For example, if there is a significant amount of dot
gain, images tend to appear too dark. For more details, see Chapter 12, Calibration.

6.4.7 Suggested background reading
If you do not have a reasonable grounding in halftoning systems then you may find the following
books helpful. This is by no means an exhaustive list and you can probably find alternatives in a good
book store or technical library.
PostScript Screening: Adobe Accurate Screens (Peter Fink, Pub: Adobe Press, ISBN: 0‚672 48544‚)
A very good introduction to digital halftoning, which then continues into discussion of process
work and advanced screening techniques. Some of the book is specific to Adobe Accurate
Screens but many of the concepts are common to HPS as well. This book also has an interesting
section on factors affecting device calibration and other causes of poor film and press output.
An Introduction to Digital Color Prepress (AGFA Corporation)
This booklet was produced to sell Agfa imagesetters, but many of the ideas discussed are
common to all digital halftoning systems.
Electronic Color Separation (Dr. R.K. Molla, Pub: R.K. Printing and Publishing, ISBN: 0‚9620453
This book refers to analog color scanners and does not discuss digital halftoning. The example
scanning systems are somewhat dated, but the halftone concept has not changed since the book
was written.

6.5 Screen angles
The Navigator RIP offers you complete control of screen angles for both process and spot colors.
There are a number of reasons for choosing screen angles carefully:


A long-established reason for choosing the screening angles (and frequencies) of color separations has been to pick a set of values that minimize inaccuracies in the screens and consequent
moire patterning when they are superimposed.
This reason is becoming less important as the accuracy of screen generation increases. For
example, the RIP includes Harlequin Precision Screening (HPS), a technology that provides
more accurate screening and reduces moire without unduly limiting the choice of screen angle
and frequency. See Harlequin Precision Screening on page 164 for details.

154

User Manual

Navigator RIP version 9

6.5 Screen angles





You may wish to override a set of angles requested in a job. This is especially useful if the job
has requested a set of angles that optimize the output quality for a particular output device,
such as a laser printer, but that may diminish the quality on other devices, such as an imagesetter.
You may want consistency: for example, on all pages of a single publication when the jobs
come from different sources. Enforcing settings in the RIP is the simplest way of getting such
consistency.

A good choice of angles for general use with color separations in offset litho work is a set in which the
colors are separated by 30 , for example: 15 , 75 , 0 , and 45 respectively for CMYK (and related sets
using these angles plus or minus multiples of 90 ). For use with elliptical dots, a separation of 60 is
recommended, leading to angles of 15 , 75 , 0 , and 135 for CMYK.
0

0

0

0

0

0

0

0

0

0

0

Note: The angles shown in the Edit Style dialog box (shown in Figure 6.2, page 149) always take
effect for jobs that contain no screening requests. If the job attempts to set screening, you must select
the Override angles in job check box if you want to use these values.

6.5.1 Changing angles for separations
The list of separations shows all colorants (including the standard process colors and any spot colors)
and their screen angles.
The boxes below the list of separations allow you to control the printing of process color separations,
and change the screen angles.
Note: Ink types are decided using the Ink Set Manager which is only available when one of the TrapPro options are enabled. See the documentation supplied with TrapPro for more information.
If the chosen output format supports additional colorants, you can also control the printing of spot
color separations. Any spot color not explicitly listed is controlled by the (Other colors in job) settings.
With the default settings, if a job calls for spot colors not named in the list of separations, the RIP converts those spot colors to the appropriate combination of process colors.
To change the settings for a particular colorant, select the colorant from the list and edit the values in
the boxes below. To change the screen angle, type the new value in the Angle text box. For details of
the other options, see Edit Style dialog box on page 347.
Note: The Angle column and text box are both blank when the selected Dot shape does not have a controllable angle. Typically, this is because the dot shape belongs to a threshold screen (which does not
have a conventional angle) or because the screening is being done in an output plugin or hardware
device.
Each colorant has its own screening angle, which allows you to avoid moire problems when a job has
several spot colors used in duotone combinations with each other or with the standard process colors.
The angles shown in the Edit Style dialog box always take effect for jobs that contain no screening
requests. If the job attempts to set screening, you must select the Override angles in job check box if
you want to use the values shown in this dialog box.

Navigator RIP version 9

User Manual

155

Screening

6.6 Dot shapes
Manipulating the dot shape generated can greatly influence the amount of dot gain in an image.
The Navigator RIP offers a variety of dot shapes; your choice between them might depend on the output device, resolution and media used, and the type of image. Dot shapes are controlled from the Dot
shape drop-down list, which is one of the screening options in the Edit Style dialog box.
Depending on the output device that you choose, you may see different entries in the Dot shape list.
Output plugins can modify the contents of this list, either to add screens suitable for the output device
or to remove the names of inappropriate dot shapes.
Note: The PostScript language allows you to specify an arbitrary dot shape by defining a spot function. This offers great flexibility but there are some possible problems as outlined in the The PostScript Language Reference Manual (2nd Ed). One probable consequence of having a spot function
defined in the PostScript language is slower rendering of jobs using that spot function: it is almost
always preferable to use a dot shape provided by a RIP in place of one implemented in the PostScript
language. The RIP includes efficient implementations of many commonly used dot shapes to offer
both speed and choice.
Jobs often specify their own dot shape. To force the RIP to use your chosen dot shape instead, select
the Override dot shape in job check box.
A Euclidean dot-shape strategy produces better saturated grays at gray values above 50%, especially
at finer (higher) screen frequencies. Euclidean strategies increase the fill of halftone cells from the
corners, instead of the centers, when the gray value exceeds 50%. That is, when the gray value is less
than 50%, the dots are black, the background is white, and the dot size increases as the gray value
increases; when the gray value reaches 50%, the dots become white, the background becomes black,
and dot size decreases as the gray value increases.

6.6.1 Common dot shapes
Sections 6.6.1.1 through 6.6.1.4 describe a number of commonly used dot shapes.

6.6.1.1 Round
This is a commonly used dot shape, but dot gain can be a problem in the shadow areas, since the white
diamond at the center of four adjoining circles can easily become filled with black as the dot size
grows. However, round dots give a smooth appearance in the highlights and middle tones.
To use round dots, choose Round from the Dot shape drop-down list.

156

User Manual

Navigator RIP version 9

6.6 Dot shapes

6.6.1.2 Round Euclidean
This dot shape reduces dot gain in the shadow areas and is good for general-purpose use. (It is common in newspaper production, for example.) To use round Euclidean dots, choose Euclidean from the
Dot shape drop-down list.

6.6.1.3 Elliptical Euclidean
This dot shape is used to avoid a fairly sharp transition at around 50% that can occur with the round
Euclidean dot shape with some imagesetters. To use it, choose EllipticalP from the Dot shape dropdown list. This is an excellent dot shape for general use.

A variant of EllipticalP is Elliptical1.
Note: The CMYK screen angles used for all elliptical dot shapes must be 60 degrees apart, instead of
the normal 30 degrees. This is because of the asymmetry of the elliptical dot.

6.6.1.4 HDS, HMS, and HCS
Global Graphics has developed a number of special screening strategies to provide better quality, control, and performance than standard forms of screening. These are not supplied with the Navigator RIP
by default, but may be purchased separately. For details of Harlequin Dispersed Screening (HDS),
Harlequin Micro Screening (HMS) and Harlequin Chain Screening (HCS), see Screening Library on
page 170 describing the Screening Library.

6.6.2 Other dot shapes
The dot shapes in this section are mostly used only for special effects or purposes; for general purpose
use, the shapes in Common dot shapes on page 156 tend to be better.

6.6.2.1 Elliptical
Elliptical dots generally produce a smoother transition than round dots, because the ellipses initially
intersect only along one axis, though this can produce a lined effect. To use an elliptical dot shape,
choose Elliptical1, Elliptical2, EllipticalQ1, or EllipticalQ2 from the Dot shape drop-down list.

Navigator RIP version 9

User Manual

157

Screening

Note: As mentioned for Elliptical Euclidean, the screen angles used for all elliptical dot shapes must
be 60 degrees apart, instead of the normal 30 degrees. This is because of the asymmetry of the elliptical dot.

6.6.2.2 Square
Square dots are rarely used, except for particular effects. Images produced with square dots tend to
have dot gain problems, particularly in the shadow areas. To use the square dot shape, choose Square2
from the Dot shape drop-down list.

6.6.2.3 Square Euclidean
Another form of square dot shape. To use square Euclidean dots, choose Square1 from the Dot shape
drop-down list.

6.6.2.4 Rhomboid
This dot shape is very similar to the square Euclidean shape, but generally gives a somewhat smoother
result. You should consider using it instead of the square dot shape. To use this dot shape, choose
Rhomboid from the Dot shape drop-down list.

6.6.2.5 Line
Line-shaped dots are generally used only to produce special effects, since there tends to be a lot of dot
gain. To use the line dot shape, choose Line or Line90 from the Dot shape drop-down list.

158

User Manual

Navigator RIP version 9

6.7

Halftone frequency

6.7 Halftone frequency
Another way to improve the quality of halftoning is to increase the halftone frequency, the density
with which the image is covered by halftone cells. Increasing the frequency is rather like increasing
the resolution of an image: more dots are produced and each dot is smaller. However, the more you
increase the frequency, the fewer gray levels you can print. Screening options and number of gray levels on page 159, discusses how many gray levels you can obtain and how many are required for various types of graphic elements. See also Controlling extra grays in HPS on page 164, on the extra grays
feature available when using Harlequin Precision Screening (HPS).

6.7.1 Changing the halftone frequencies
In the Edit Style dialog box there is a list of halftone frequencies: one for each device resolution, or for
a range of resolutions. The list of available resolutions depends on the chosen output device. The RIP
uses the frequency that corresponds to the resolution selected in the Edit Page Setup dialog box. The
controls below the list allow you to change the frequency for the selected row, and to change the frequency and resolution units.
To change the halftone frequency for a particular resolution, or range of resolutions, select the row in
the list and type the desired frequency into the text box below. You can change the units for the resolution to dots per inch (dpi), dots per centimeter (dpcm), or dots per millimeter (dpmm). You can change
the units for the frequency to lines per inch (lpi), lines per centimeter (lpcm), or lines per millimeter
(lpmm).
Sometimes the job itself specifies a screen frequency to use when rendering. If this is the case, the
halftone frequency you specify in the Edit Style dialog box is ignored. To force the RIP to use your
screen frequency instead, select the Override frequency in job check box. Always consider selecting
this box if you use HPS. (See Harlequin Precision Screening on page 164.)

6.8 Screening options and number of gray levels
It is an occasional requirement to know, and possibly control, the number of gray levels produced on a
rendered page.

6.8.1 How many gray levels can you see?
Many studies have been published explaining just how many gray levels the human eye can distinguish, or how many levels a printing press can produce from halftones. The results vary from around a
hundred to over a thousand depending on defined viewing conditions and the exact definition of what
constitutes a distinguishable difference. The most worrying aspect of these studies is that most of them

Navigator RIP version 9

User Manual

159

Screening

are correct under the circumstances in which they were carried out, they determined the right result.
The only thing to do at this stage is to throw away such studies and build on observations of real-world
printing.

6.8.2 How many gray levels do you get?
Conventional screens can produce a maximum number of gray levels linked to the resolution of the
output device and the screening frequency.
If you do not enable extra grays you get as many gray levels as the number of laser spots in a halftone
cell (plus one for all spots off‚ that is, white). This number is given by the expression:

resolution  2
 ---------------------------------------+1
 screen frequency
Thus at 100 lines per inch (lpi) and 2540 dots per inch (dpi) you get 646 gray levels ‚¶
2

 2540
------------ + 1 = 646
 100 
¶ but at 175 lpi and 1270 dpi you get only 53 gray levels:
2

 1270
------------ + 1 = 53
 175 
If you switch on Generate extra gray levels in the Edit Style dialog box then you get as many gray levels
as you define with the Limit number of distinct gray levels drop-down list. It is a feature of HPS that the
number of levels can exceed the maximum defined in this expression.
Some RIP screening options do not follow this expression:




Harlequin Precision Screening (HPS) is able to produce more gray levels than predicted by the
conventional expression.
HDS does not have a conventional frequency to apply in the expression though it is possible to
establish a rough correspondence between each HDS setting and a conventional screen of a
particular frequency at a particular resolution.

6.8.3 How many gray levels do you need?
The number of grays you need depends on what you are trying to produce. Some types of images with
varying needs for number of gray levels are:


Flat tints



Contone scans



Graduated tints and blends

Images vary within these categories, but the following discussion of each category should show you
the principles to apply in judging how many grays are needed.

160

User Manual

Navigator RIP version 9

6.8

Screening options and number of gray levels

6.8.3.1 Flat tints
If you are using a few flat tints behind text or in a simple diagram then you may not need more than a
dozen gray levels. Do not enable extra grays in the RIP solely to reproduce flat tints.

6.8.3.2 Contone scans
If you are using a small desktop flat-bed scanner that is producing contone images for output then you
are usually able to work with output producing as few as 64 gray levels. A few scans may benefit from
up to 128 gray levels and the distinction is usually as much to do with which desktop scanner you are
using as with the image content. In general, images with very gentle tonal or color graduations (for
example: a cloudy, but not stormy, sky) need the most gray levels, but even in these cases the best 6bit (64 gray levels) scanner can produce better output than many 8-bit (256 gray levels) competitors.
For scans made on a drum scanner or a high-quality flat-bed scanner, you can usually obtain adequate
output with this low number of gray levels, but the quality of the output normally increases with up to
256 gray levels. Several scanners are available which produce 10, 12, or even 16-bits-per-channel
image data, and it is possible that you can increase the output quality of these images by allowing
more gray levels on output PostScript LanguageLevel 3 includes the facility for 12-bit-per-channel
images to be output (4096 gray levels), and this is supported in the Navigator RIP. The increased number of gray levels from the scanner is intended more to allow input noise to be removed, and to reduce
the information loss inherent in tonal adjustment, than for passing on to the final output device.
Finally, any image manipulation software that produces some of its tonal alteration effects by means
of the PostScript language operator settransfer (or any similar mechanism) and which therefore ends up
requesting a nonlinear gray scale from the RIP may require an increased number of grays to reflect
these changes adequately. Although applications such as Adobe Photoshop allow transfer functions to
be saved in EPS files, they apparently intend this for device linearization rather than for tone curve
control.
Note: Adjusting tonal data in image manipulation software often benefits from an original scan with
as many levels of gray as possible to reduce quantization effects when changing brightness or contrast,
but this does not directly affect the number of gray levels that are required from the output device.

6.8.3.3 Graduated tints and blends
It is in these areas that the requirement for extra gray levels really shows. To avoid confusion, the
word vignettes is used here to cover both graduated tints and blends.
The minimum number of gray levels required is 256, but some long vignettes, or those over a relatively short range of tints, may require more. The rule of thumb is that no single step in a vignette
should be more than 0.03 inches (0.75 mm) wide.
Thus a vignette from 20% to 70% tint that is 6 inches long requires at least 400 gray levels:

100
6
--------------------- ---------- = 400
 70 – 20  0.03
This rule varies with the screen frequency that you are using, with the particular tint range (because
steps are most obvious in dark graduations), with the hardness of the dots produced by the output
device and with the size of the difference in gray levels between steps, but it serves very well as a
Navigator RIP version 9

User Manual

161

Screening

basic starting point. Because of the variation with the size of the difference in gray levels between
steps it is very unlikely that you should ever require more than 1024 gray levels, and in many
instances 512 or 256 levels are sufficient.
If you are producing blends in applications such as Adobe Illustrator¬Æ or FreeHand¬Æ (formerly
from Aldus, now Macromedia) then you should make sure that you create blends with enough steps
the RIP cannot add more steps into the blend. You may also need to switch on extra grays and use Harlequin Precision Screening with its ability to exceed the conventional limit of gray levels in order to
display all the requested gray levels.
Graduated tints from many older applications do not produce more than 256 gray levels:






Some applications always produce 256 grays for a 0 to 100% graduation. Examples are FreeHand and QuarkXPress (version 3.11 and later) when printing to a PostScript LanguageLevel 2
compatible device.
Some always produce 256 gray levels in a single blend, even a short one such as 10% to 30%.
An example is QuarkXPress version 3.1.
Some calculate the number of gray levels which the current resolution and screen frequency
could produce on a RIP that does not support extra gray level functionality and use that. Examples are FreeHand and QuarkXPress (version 3.11 and later) when printing to a PostScript
LanguageLevel 1 compatible device.

In the first two cases it may be worth switching on extra gray levels in the RIP if you are using a low
resolution or a fine (high frequency) screen. In the last case you gain no benefit by switching on extra
grays.

6.8.4 Gray level controls
There are two screening options in the Edit Style dialog box shown in Figure 6.2, page 149, that affect
the number of gray levels.
These options are applicable to any screen, especially HDS, to limit the number of available gray levels. (For HPS only, the number of levels can also be increased to more than the natural number of levels for the screen.)
Limit number of distinct gray levels

When you have selected the accompanying check box Generate extra gray levels, described next,
you can choose an entry from list to control the number of gray levels that the RIP produces.
There are several different cases.
With this list enabled:



162

When using HPS, the RIP produces the exact number of gray levels set here.
When not using HPS, the RIP treats the value chosen here as an absolute upper limit and
uses the natural value of the screen or this limit, whichever is lower.

User Manual

Navigator RIP version 9

6.9

Job settings and Navigator RIP settings

This list is disabled when Generate extra gray levels is not selected. With this list disabled:




When using HPS, the RIP produces the number of gray levels required to attain the specified accuracy of screening, as set in the HPS Options dialog box, shown in Figure 6.6, page
165.
When not using HPS, the RIP produces the natural number of gray levels for the screen.
(For HDS, the natural number can be very large and using HDS unlimited can have a performance penalty.)

Generate extra gray levels

There are two possible reasons for selecting this box:




With all Navigator RIP screening options, it enables the use of the Limit number of distinct
gray levels to restrict the number of gray levels produced on the output page.
With HPS only, it enables the use of more screening levels than needed to get the required
accuracy of screen angle and frequency. Generating a large number of screening levels can
reduce undesired patterning, even if the number of levels actually used is restricted by the
value chosen for Limit number of distinct gray levels. See Controlling extra grays in HPS on
page 164 for the control of extra screening levels in HPS.

6.9 Job settings and Navigator RIP settings
The details of how you can choose settings for dot shape, frequency, and angle are given in, respectively, Dot shapes on page 156, Halftone frequency on page 159, and Screen angles on page 154.
These sections also describe how to override any conflicting settings made in a job.
The following summary of what happens when the Navigator RIP processes a job may be useful.
The RIP determines the screen or screens it will use for a job using the values in the Edit Style dialog
box, and the color of the pages being processed:



Monochrome jobs use the gray settings.
The color of pages in preseparated jobs is deduced by a variety of means, as described in Automatic detection of color separations on page 176.
Note: Some jobs which have preseparated spot color pages do not contain any information
about the name of the spot color they represent. In these circumstances, the RIP uses the screening angle that corresponds to the (Other colors in job) entry.



Colors of pages are determined from settings in the Edit Style dialog box.

When a job supplies any screens of its own (using the setscreen, setcolorscreen, or sethalftone operators)
then if the override check boxes in the Edit Style dialog box are all cleared, the RIP uses the frequency, angle, and dot shape of the supplied screen until the job provides another screen or cancels
any screens it has supplied.
However, if the Override frequency in job check box is selected in the Edit Style dialog box the RIP
continues to use the frequency given in the dialog box instead of the one supplied by the job. Similarly, if Override dot shape in job is selected, the RIP ignores the dot shape supplied by the job and uses

Navigator RIP version 9

User Manual

163

Screening

the one given in the dialog box instead, and if Override angles in job is selected, the RIP ignores any
angles given by the job in favor of those in the dialog box.
If all three boxes are selected, all screens given by the job are effectively ignored.
If you are using HPS, the frequency and angle values are also subject to slight adjustment to achieve
accurate screening. See Using the HPS controls on page 165 for details of how to limit any adjustment.
Note: HDS screens do not have a conventional screening frequency or angle and ignore the frequency
and angle settings. HCS uses a fixed set of angles, so it also ignores the angle setting.

6.10 Harlequin Precision Screening
When placing color separations on top of one another, the angles and frequencies at which those separations are produced should be calculated very accurately so as to reduce moirÐ© patterns. Historically, this required the use of specially selected screens that minimize the patterning effect.
Harlequin Precision Screening (HPS) is a color screening technology that ensures high-quality reproduction with any screening option in the RIP (defined using a spot function). You can enable HPS for
a separations style by selecting the Use Harlequin Precision Screening check box in the Edit Style dialog
box. Once enabled, HPS is a property of the Page Setup which uses this separations style, and the RIP
uses HPS for all pages printed with that Page Setup.
HPS allows you to select any screen frequency and to use the usual CMYK screen angles of 0 , 15 ,
45 , and 75 (plus multiples of 90 ). To reduce moire patterning, HPS uses an adaptive screening technique that can adjust each halftone dot so that it is placed within one half pixel of its ideal location.
0

0

0

0

0

HPS also allows you to choose how rosettes are formed in the image, and to generate extra gray levels,
allowing the use of higher screen frequencies than the resolution would normally allow.
The default HPS settings supplied with the RIP have been carefully chosen to provide good output on
most, if not all, output devices. We strongly recommend that you test output using the default settings
(in the HPS Options dialog box) before adjusting anything at all. The information in Possible problems with output on page 167, is intended to help in adjusting values if you think that it is necessary.

6.10.1 Controlling extra grays in HPS
The ability to generate extra gray levels is a very powerful feature of HPS. It allows you to use more
gray levels in your job than are normally available with conventional screening. This has particular
benefits in eliminating stepping in vignettes and avoiding posterizing.
Gray level controls on page 162 describes the use of the gray level controls in the Edit Style dialog
box, including the effect of switching on or off HPS.
There is one extra option within HPS.
The extra option, Limit screen levels, in the HPS Options dialog box allows you to separate patternreduction adjustments from extra gray generation set the Limit screen levels value to a high value and
Limit number of distinct gray levels, in the Edit Style dialog box, to the number of gray levels that you
actually require. If you see patterning on individual films, try increasing the Limit screen levels value: if
you believe that there is a shortage of memory, then reduce the value.

164

User Manual

Navigator RIP version 9

6.10

Harlequin Precision Screening

6.10.2 Using the HPS controls

Figure 6.6 Harlequin Precision Screening Options dialog box

Job settings and Navigator RIP settings on page 163 describes how the RIP arrives at a set of screening values for a job.
When using HPS, for each screen in a job, the RIP calculates the best set of screen angles and frequencies to use for the set requested. The process starts with the requested frequency the frequency set in
the job or, when Override frequency in job is selected, the value in the Edit Style dialog box. The Edit
Style dialog box contains a list of halftone frequencies: one for each device resolution. The requested
frequency is the one that corresponds to the resolution selected in the Edit Page Setup dialog box.
Some requested frequencies may require a lot of memory or make it difficult to achieve the desired
angle accuracy, while a nearby frequency does not have these problems. If there is a problem with the
requested frequency, the RIP can select one of these nearby frequencies as the deviated frequency.
The Maximum frequency deviation specifies the greatest deviation from the requested frequency that is
allowed. The RIP selects the individual frequencies for the Cyan, Magenta, and Black screens such
that they are within the specified Frequency accuracy away from the deviated frequency.
The angle is snapped to the nearest 7.5 if you select Snap angles to nearest 7.5 degrees.
The angles of the selected screen set are then within the specified angle accuracy of the requested
angles.
The following subsections describe some individual options in more detail.

6.10.2.1 Zero degrees frequency adjustment
Once the RIP has calculated a screen set for the Cyan, Magenta, and Black plates (as separations or
composite channels within the RIP), it determines the frequency of the Yellow plate using the value
specified for Zero degrees frequency adjustment. The identity of the Yellow angle is determined either
from the color halftone dictionary supplied to the setscreen or sethalftone PostScript language operator,
or is taken as the third entry in Optimize for angle set.
The default value of 7% means that the frequency of the Yellow plate is 107% (100% + 7%) of the
deviated frequency used for Cyan, Magenta, and Black plates.

Navigator RIP version 9

User Manual

165

Screening

A number of printers have discovered that increasing the frequency of the Yellow plate can reduce the
residual moire that is inevitable when using four process plates with halftoning systems. Values typically used are 5% to 11% greater than the frequency of the other plates. The effect is very similar if the
frequency of the Yellow plate is reduced rather than increased, and that this allows the more noticeable
Cyan, Magenta, and Black plates to be imaged at a higher frequency when the capability of the platemaker/paper/ink/press combination is the limiting factor on halftones.
Enter a negative number to reduce the frequency used for the Yellow plate.

6.10.2.2 Maximum frequency deviation
Increasing the value in the Maximum frequency deviation box gives the RIP more freedom in finding an
optimal screen set and can reduce patterning or moirÐ©, at the expense of possibly giving final output
at a screen frequency further from that originally requested. A value of between 5% and 10% is normally acceptable.
Increasing the Angle accuracy or Frequency accuracy settings (that is, increasing allowable variations
from the deviated frequency and angle) also gives the RIP more freedom in selecting a screen, and
may reduce patterning on individual films, but this may also increase the likelihood of moirÐ© effects
between plates. If you are using HPS to produce extra grays on mono or non-overlapping spot color
work then you can safely increase these numbers and may obtain slightly better output. If you are producing process separated work then you should probably not change the default numbers.
If Abort job if accuracy not achieved is selected and it is not possible to determine a screening set within
the angle accuracy or frequency accuracy requested, then the RIP cancels the job currently being output.

6.10.2.3 Enable HPS 2.0
Select the Enable HPS 2.0 box to use features added to HPS. These features can improve the quality of
output when using the Generate extra gray levels option. Flat tints and vignettes are smoother, particularly in highlights and shadows, because the mottling effects which can be caused by generating the
extra gray levels are reduced. (Even without HPS 2.0, these effects are unlikely to be significant until
the ratio of resolution to screen frequency is less than 12: for example, you might see mottling with a
resolution of 1270 dpi and a screen frequency of 150 lpi, where the ratio is about 8.5.)

6.10.2.4 Generate clear centered rosettes

Figure 6.7 Clear-centered and spot-centered rosettes
Generate clear centered rosettes is one of the few controls which you might expect to change in the HPS

Options dialog box. When color separations are combined, the dots form one of two rosette patterns as
shown in Figure 6.7. Clear-centered rosettes are less likely than spot-centered rosettes to show a significant color shift if separations are printed slightly out of register, but the output produced is normally less saturated, lighter, and has a more noticeable rosette structure. In general, output at high

166

User Manual

Navigator RIP version 9

6.10

Harlequin Precision Screening

frequencies, or where the output may be run on presses with poor registration, should use clear-centered rosettes, while output at low screen frequencies or on well registered devices (including most
color printers) should use spot-centered rosettes.
If you find that you are not getting consistent clear-centered or spot-centered rosettes across the full
width of a page: try varying the requested frequency slightly; or increase Maximum frequency deviation,
to allow the RIP to find a screen set with better angle and frequency accuracies.

6.10.2.5 Optimize for angle set
It is possible to reduce the amount of memory required by HPS if you can give some guidance to the
software about which screen angle sets are to be used in PostScript language jobs, in the Optimize for
angle set text box. The default set (15, 75, 0, 45) is used for most offset litho work, while settings are
also provided for other screening systems.
To decide which entry you should use:
1. Convert all the screen angles your job uses to numbers in the range 0 through 90 . Do this by
repeatedly adding 90 to any values less than 0 or subtracting 90 from any values of 90 or
greater.
0

0

0

0

0

0

2. Compare the converted numbers with angles in the menu entries. There are three possibilities:


If you reach a set of values where all of the numbers are in a single entry in the menu then
use that entry.



If the values do not match an entry exactly then select the closest match.



If there is no close match then select the default (15, 75, 0, 45).

6.10.3 Possible problems with output
There are two main kinds of problem to avoid with HPS output:



Patterning on individual films.
Patterning caused by the interaction of two or more films from separated output (often called
moire).

In addition there are practical considerations. You usually want your output to be produced as rapidly
as possible, and you do not want to have to install excessively large amounts of RAM in the computer
running the RIP.
The following subsections describe how to address these problems.

6.10.3.1 Patterning on individual screens
This can be caused either by the hardware or the software. If you see stripes or bands parallel to the
output engines scan lines (across the film on a capstan device, along it in a drum device), then try
these cures:


Rotate the page by 90 degrees.

Navigator RIP version 9

User Manual

167

Screening





Select the check box Rotate screens according to page rotation in the Edit Style dialog box. (This
check box does not affect HDS.)
Output the page again.

If the bands rotate with the page, the problem can probably be corrected by adjusting settings in the
RIP; if they do not, your hardware may be at fault.
If you are seeing patterning on individual films there are two techniques that you can try which may
help to reduce the effect:




Increase the number of screen levels generated. In the HPS Options dialog box, set a high
number for Limit screen levels. The default value is 65536, which is the maximum value.
Try slightly different screen frequencies often a change of only a couple of lines per inch can
make a considerable difference to the patterning.

6.10.3.2 Moire between two or more films
Many people make the mistake of placing four process separated films on top of each other on a light
table, and being horrified by the moire displayed. Moire is always visible if you view all four plates in
this way. If you want a quick assessment of the moire on a final print job, view just the Cyan,
Magenta, and Black films. Adding the Yellow film as well can be useful in assessing variations in the
marginal moireadded by the Yellow plate, but should not be included in your standard viewing.
Eliminate two other sources of moire before attempting to tune HPS:




If you are using a dot shape which is not symmetrical when rotated in 90 steps (that is, virtually all dot shapes apart from square and round) then all the screen angles used for cyan,
magenta and black plates may need to be 60apart rather than the traditional 30 apart. Yellow
should then be at 30 from two of the screens. Suggested angles are 15, 75, 0, and 135 for
cyan, magenta, yellow, and black respectively. Whether you need to follow this suggestion or
not depends on the content of the image (because flat tints in certain colors show moire most
clearly) and on how extreme the asymmetry of the dot shape is.
Many older process separating applications (and newer ones using PPDs, PDFs, and so on to
optimize for older imagers) include individual screen frequencies and angles for the four process colors which are designed to optimize output on older PostScript language compatible
RIPs that are not capable of producing halftone screens at accurate angles and frequencies.
Using these frequencies and angles means that the output from the RIP with HPS is no better
than without HPS, and indeed may be far more prone to moire.
The best route is to switch off such features in the sending application if possible, or to set up a
PPD (or other configuration file) which uses the same screen frequency for all separations, and
a standard set of angles: for example, 0, 15, 45, and 75.
If modifying the input file is not possible then, in the HPS Options dialog box, select Snap angles
to nearest 7.5 degrees and, in the Edit Style dialog box, select Override frequency in job. You
cannot use this second method if you want several different screen frequencies on a page: for
example, for special effects.

168

User Manual

Navigator RIP version 9

6.10

Harlequin Precision Screening

6.10.4 HPS and pattern screens
Some applications use the PostScript language halftoning mechanism to produce patterns rather than
halftones. However, devices which do not require screens would then reproduce the pattern as a shade
of gray. Some applications which do this produce poor PostScript language files, in such a way that
they only produce the desired result at resolutions which are multiples of 75 dpi, presumably because
they were designed for output at 300 dpi on a laser printer and not for high-resolution imagesetters.
To avoid these problems, the RIP detects such screens and replaces them either with a special screen
which does not suffer from resolution problems, or with an equivalent PostScript language pattern,
depending on whether the output is halftone or continuous tone.
HPS does not alter these pattern screens in any way; angles, frequencies, and dot shapes are left
unchanged and no extra gray technology is used with them.

6.10.5 Increasing HPS performance
The first time a RIP installation uses a particular HPS screen, the RIP must generate it. This can take a
few minutes. However, HPS screen sets are cached to disk, which means that there is very little performance difference from using HPS if the RIP has a large enough memory allocation (and apart from
the first time that a particular screen set is used, which is when the RIP builds the disk cache). There
may be some performance increase when using screen caches generated during previous jobs.
The RIP caches screen sets with PostScript defined spot functions as well as those with recognized
functions. These spot functions are not processed quite as rapidly as the built-in functions the first
time that they are used but when previously cached screens are used there is no difference in performance between built-in screen functions and spot functions supplied in PostScript.
High performance screening with HPS in the RIP requires a reasonably large amount of RAM. As a
guide, you should assume that extra memory in the range 8 through 12 MB RAM is required to use
HPS effectively.
If messages are produced in the Navigator RIP window saying that insufficient memory is available
and that performance is being affected then you should increase the amount of RAM available to the
RIP to obtain significant speed increases.
If you are not using extra grays then increasing the freedom of HPS to select from a wider range of
screen sets by increasing the Maximum frequency deviation, Angle accuracy, or Frequency accuracy settings reduces the memory requirement. If extra grays are switched on, you can also reduce memory
usage by using lower values for Limit number of distinct gray levels and Limit screen levels.
Ensure that the Optimize for angle set value defined in the HPS Options dialog box is correct for the
angles that you are using. If the value is set incorrectly then processing a job may require significantly
more memory.
If you are imposing several separations onto one output film, the relative positions of the plates which
do not use 0 and 45 degree angles (usually Cyan and Magenta) can make significant differences to
memory requirements and rendering times. If at all possible, ensure that these two plates do not occur
side by side: that is, avoid the case where a single fast scan line on the final film can pass through both
a Cyan plate and a Magenta plate. If all four CMYK separations are to be produced on a single film

Navigator RIP version 9

User Manual

169

Screening

then the best default configuration is a two by two square with Cyan and Magenta in diagonally opposite corners, because film rotation cannot then cause these plates to appear on the same scan line.

6.11 Screening Library
Several other screen sets can be supplied for use in the Navigator RIP.
The code to handle all of the screen sets is present in all shipped copies of the RIP, but individual
screen sets must be enabled using key numbers (passwords). Each password is tied to both a specific
screening style and to the serial number of the RIP for which the option is required. Please contact
your supplier for details of pricing on each screen set or bundle of sets (and other options enabled by
passwords).
Where the RIP itself is secured with a hardware security dongle the security number of the dongle is
used as the Navigator RIP serial number. Please note: the number printed on the dongle itself and
marked as serial number is the dongle hardware serial number and not the same as the Navigator RIP
serial number.
While the RIP is starting up, it reports the serial number and its checksum (a check to reveal errors in
copying the digits of the serial number) in the Navigator RIP window. This example report is for a fictitious serial number:
Serial number: 1234-56

6.11.1 Switching on Screening options
You enter the passwords in a dialog box accessed from the Configure RIP dialog box. Click Extras in
the Configure RIP dialog box to display the Configure RIP Extras dialog box.
There is one entry in the list within the Configure RIP Extras dialog box for each of the HSL screen
sets. (There is a second entry for HDS, titled HDS-Light: this entry provides a limited use of HDS,
restricted to lower resolution output devices such as proofing printers.)
There may also be entries which refer to options in other areas of the RIP: for example, ColorPro for
the Navigator RIP color management system. These entries are described elsewhere in this manual:
see Extras on page 185 for a summary of other entries.
The word Yes after a name indicates that the screen set or option is enabled. To enable a new set or
option, select it in the list and click Add. In the Enable Feature dialog box that appears, enter the password supplied to you for that set, then click on OK to return to the Configure RIP Extras dialog box
and OK again to return to the Configure RIP dialog box.
You can change a password already entered by selecting the appropriate entry in the list on the Configure RIP Extras dialog box and clicking on Add.
Note: To disable a feature that you have already enabled with a valid password, enter a password of 0
(zero).
The RIP may reject a password when you type it into the Enable Feature dialog box. The main reasons
for rejection are:


170

The password is wrong, probably because of incorrect transmission or a typing mistake.

User Manual

Navigator RIP version 9

6.11



Screening Library

The password is for the wrong option. For example, if you enter an HDS password after selecting HCS then the password is not accepted.

The fact that the Enable Feature dialog box accepts a password does not necessarily imply that the
password is correct for that particular screen set on that particular copy of the RIP. (Remember that the
serial number of the Navigator RIP is set by the dongle.) If you get errors when using an HSL screen,
please check that the entered password is correct.

6.11.2 Selecting an HSL screen set
Once enabled, each screen set adds one or more entries to the Dot shape drop-down list in the Edit
Style dialog box. Select the entry for the screen you want to use.
Note: You can select a screen set in the Edit Style dialog box so long as the RIP has accepted a nonzero password entered in the Password dialog box. All attempts to use the screen will fail if the password entered is invalid for the the Navigator RIP serial number currently in use.

6.11.3 Harlequin Chain Screening (HCS)
Harlequin Chain Screening uses a long ratio elliptical dot. When used for process color separations the
angles used are 60 apart, rather than the more common 30 apart used for most offset litho work. This
gives an overall triangular pattern and produces a very fine rosette structure. The angles used are -45 ,
45 , -15 , and -75 for yellow, magenta, cyan, and black respectively.
0

0

0

0

0

0

When used at high frequencies, this screening set is extremely good at holding detail in continuous
tone areas (for example, scanned images), but can suffer from worse object moire than, for example,
Euclidean dots if the subject of the image contains fine patterns.
HCS is also very good at creating smooth, flat looking tints in process color work even at low screen
rulings, although you must take care at the edges of such tints, where patterns can occur unless the
tints are bounded: for example, edged with a black rule.
For HCS screens, the RIP uses the screen frequency entered into the Edit Style dialog box, but ignores
the entered angle. Instead, the RIP selects an angle automatically based on the color separation being
processed, from the set (-45 , 45 , -15 , and -75 ).
0

0

0

0

We recommend that you turn on Harlequin Precision Screening while using HCS‚ at higher frequencies, also use the extra grays functionality of HPS.

6.11.4 Harlequin Dispersed Screening (HDS)
Harlequin Dispersed Screening is the Navigator RIP Frequency Modulation (FM) screening technology. The main advantages of using HDS are that it produces no moire it has better definition than conventional screening, and registration is less critical. HDS also has a visually pleasing screen structure
and is generally more printable than other FM screens. Finally, it should be noted that HDS is intended
for use with a wide range of printing processes.

Navigator RIP version 9

User Manual

171

Screening

Instead of using a fixed shaped dot structure, HDS uses irregular clusters of pixels to form an irregular
HDS dot. The distribution of these dots or clusters through the screen is what gives HDS its characteristics.
Five varieties of HDS are supplied with HSL, called HDS Super Fine, HDS Fine, HDS Medium, HDS
Coarse, and HDS Super Coarse. (There are also closely related HDS screens for use with output
devices supporting the alternative process color systems discussed in Alternative process color systems on page 336. For example, you may see Hex HDS Super F as well as HDS Super F in the Dot shape
menu of the Edit Style dialog box.)
Warning: Do not use Hex HDS Super F or other screens whose names start with Hex when your output
device is operating in a conventional (CMYK or RGB) output space. Several output plugins remove
the names of inappropriate dot shapes from the Dot shape list to help prevent mistaken choices.
These varieties differ in the size and distribution of the HDS dots (clusters) used to create tints. The
selection of which to use should be based on the physical characteristics of the imagesetter being used,
together with details of the plate making, press, ink, paper, and press environment.
In general, the higher the quality of the entire printing process the smaller the HDS dot that can be
used. The finer HDS screens are best used with high quality imagesetters capable of holding single
laser spots. The coarser HDS screens are best selected on presses which cannot hold very fine detail,
such as high speed web-offset presses. The physical size of the HDS dot created with each of these
options varies both with the imagesetter laser spot size, and with the resolution at which it is driven.
HDS Super Coarse (HDS Super C) is designed to be suitable for use in newsprint applications on imagesetters at mid-range resolutions, that is 1000 through 1600 dots per inch (dpi). HDS Super Fine (HDS
Super F) is designed for output devices where final copy is produced directly: for example, laser or
inkjet printers.
HDS Super Fine:

HDS Fine:

HDS Medium:

HDS Coarse:

172

User Manual

Navigator RIP version 9

6.11

Screening Library

HDS Super Coarse:

Below is a table with the spot sizes in microns for the different HDS models and different output resolutions for 20% HDS screen.
Imagesetter/platesetter
resolutions dpi

1016

1200

1800

2400

3600

HDS Super Fine 1x1 pixel

25

21

14

11

7

HDS Fine 2x1 pixels

35

30

20

15

10

HDS Medium 2x2 pixels

50

42

28

21

14

HDS Coarse 2x3 pixels

61

51

34

26

17

HDS Super Coarse 4x4 pixels

100

84

56

42

28

Table 6.1 Spot sizes in microns of a 20% HDS screen

Both the frequency and the angle supplied in the Edit Style dialog box are ignored when using HDS
screens, except for calibration.
As with any high definition screening technology, accurate calibration is important for good quality
output using HDS, and it may be necessary to create several calibration sets for use with different
presses or different paper stocks on a given press. In most circumstances however, a single calibration
set is sufficient and you should therefore specify a range of frequencies likely to cover any line frequency which might be set in the screening dialog boxes or requested by a PostScript language job.
The HDS screens are symmetric, that is, you may use a single calibration set for both positive and
negative output.
Though HDS screens do not have the same lines per inch (lpi) characteristic as conventional screening
the following rough comparisons may be useful. If we take the case of an imagesetter working at
1524 dpi with a relatively small dot size (less than 20 m), then HDS Coarse has a dot gain on film
only slightly higher than a conventional 150 lpi screen in the midtones, and holds up better than the
conventional screen in the highlights and the shadows. HDS Medium has a similar correspondence to
a 200 lpi screen at 1524 dpi. Finally, HDS Fine has characteristics similar to a 300 lpi screen, and
needs similar careful handling to obtain good results. It should be noted that the lpi correspondence
changes more or less in proportion to changes in the imagesetter resolution. For example, a rough correspondence to a 100 lpi screen is given by HDS Coarse at 1016 dpi, though if the final press has high
dot gain this still has to be taken into account in the calibration.
As can be seen from the above comparison with conventional screening, many people using HDS
screens may become aware of the issues required to print very fine detail on film for the first time. The
following hints and suggestions are useful when working with HDS screens, particularly HDS Fine,
and also apply to conventional and other screens at very high line frequencies. These hints are not a
definitive guide, but do provide a starting point for producing good HDS output.

Navigator RIP version 9

User Manual

173

Screening

Consider every stage of the process, including:








While scanning, choose an appropriate unsharp masking setting. You may need to use unsharp
masking settings different from those used for conventionally screened output.
When producing film positives, try using different laser spot sizes. We have found that the best
results are produced if a relatively small laser spot size is used in conjunction with exposures
sufficient to give solids with densities in the range 3.5 through 4.0. However, this may not be
applicable to every imagesetter.
When making plates and proofs, take great care to ensure that the film is clean and dust free
and make any other adjustments that help to ensure intimate contact between the film and the
proof or plate medium. For example, increase the vacuum pump-down time from, say, 20 seconds to 60 seconds or more.
When printing on a press with relatively high dot gain, consider compensating for this gain. On
such presses, particularly on web-offset, you may have to make an adjustment for the higher
dot gain in the highlights and midtones due to the finer detail in the screen. Various schemes
are possible and have been used for this; one approach is to calibrate the screen for the press
directly, but be aware that images are normally scanned with a modest press compensation
already in place and take this into account.

HDS screens have no angle as such, but are rotationally isotropic (they have the same characteristics
in every direction). Even though the screen angle is ignored, different patterns are used for each process separation. This does not depend on the screen angle originally selected, but uses the automatic
color separation detection, described in Automatic detection of color separations on page 176.
The screen caches used by HDS mean that HDS output is produced at virtually identical rates to that
using other screening systems within the RIP. The caches are reasonably large, although not significantly greater than those used for many combinations of screen frequency, resolution, and angle. Do
not select very large values for Limit screen levels in the HPS Options dialog box, unless you have very
large amounts of RAM available to your copy of the RIP.
Unlike HPS, HCS, or HMS, the screen caches used by HDS cannot be created by the RIP if they are
not present when a screen is selected. Each of the variants of HDS requires cache files to be installed
into the Screens subfolder of the SW folder. These are saved in folders named in the pattern
HDS--gen, where  is replaced by particular values. The  part of the name is a for super
fine, b for fine, c for medium, d for coarse, or e for super coarse. Each folder has subfolders, named: A,
Ai, B, Bi, C, D, Default, E, and F. These folders allow for up to six independent output colorants,
including light and dark versions of two inks, and spot colors. For example, with a conventional fourcolor device, the mapping is that Cyan uses A, Magenta uses B, Yellow uses C, and Black uses D.
Installer applications supplied by Global Graphics for use with the RIP automatically install all appropriate cache files.
The RIP ignores the value set for Rotate screens according to page rotation (in the Edit Style dialog box)
when screening with HDS.
Compression of page buffers is less efficient with HDS than other screening techniques. (It is a general rule of compression that increased randomness in data reduces the amount by which it can be
compressed.) You can expect compressed page buffers to be larger when using HDS, and disk performance to become marginally more important to total throughput. It is usually possible to maintain or

174

User Manual

Navigator RIP version 9

6.11

Screening Library

improve throughput with the same output quality, by exploiting the ability to process jobs at lower resolution.
HDS screens cannot be used if the horizontal and vertical output resolutions selected are not equal.

6.11.5 Harlequin Micro Screening (HMS)
Harlequin Micro Screening uses a Respi screen structure to allow greater highlight gradation even at
high screen rulings. It does this by using half the nominal screen between 0% and 5% dot area and
between 95% and 100% and the nominal screen ruling between 20% and 80% dot area. Between 5%
and 20%, and between 80% and 95%, HMS goes through transition zones.
Two variants of HMS are included in HSL; one where the dot shapes in the 20% to 80% tints are very
similar to the standard Euclidean dot shape, and one where they closely resemble the standard Elliptical shape.
HMS Euclidean:

HMS Elliptical1:

If you have been limiting the screen frequencies that you use because you cannot be certain of holding
the small highlight and shadow dots with finer screens then HMS should allow you to output at significantly higher frequencies. However, it does not assist you if you need to limit your screen frequencies
because of press registration problems.
HMS may be used to extend the length of print runs in situations where this is normally limited by
drop-out increasing as the print run progresses.
HMS acts on both the screen frequency and angle as defined in the Edit Style dialog box in the RIP.
Careful calibration can improve output quality when using HMS. The Euclidean variant of HMS is
symmetrical, but you should normally produce separate calibration sets for positive and negative output of the Elliptical HMS form.

Navigator RIP version 9

User Manual

175

Screening

6.11.6 Troubleshooting HSL
An undefinedresult error from setscreen, setcolorscreen, or sethalftone is probably due to one of the following:


An attempt has been made to use a screen set which has not been enabled, or where the password entered for that screen set is incorrect for the current security number. This can occur if
an incorrect password has been entered accidentally or if the dongle has been changed from
that for which the password was originally created.
Note: Selection of HSL screens in the Screening dialog box is enabled when any nonzero
number is entered in the Enable Feature dialog box for that screen set‚ the ability to select a
HSL screen does not necessarily imply that the number entered is correct for use with the specific dongle connected.



An attempt has been made to use an HDS screen when HDS has been correctly enabled, but
one or more of the appropriate HDS screen caches is not present.

6.12 Automatic detection of color separations
There are several procedures in process separated work where the RIP must know which color is
being interpreted:


Using HCS and HDS correctly.



Overriding screen angles.



Recombining preseparated jobs.



Warning of an attempt to separate a preseparated job.

Identifying the color in auto-separated jobs is simple, but all versions of the RIP supporting HSL are
also capable of detecting which color is being interpreted in preseparated PostScript from a very wide
variety of applications.
While the detection methods used have a very high success rate they are not guaranteed to function
with all PostScript language files generated by applications. See Other options on page 350 for details
about the Recombine preseparated jobs option.

176

User Manual

Navigator RIP version 9

7
Configuring the RIP
Chapter 1 through Chapter 6 describe how you can use the Navigator RIP to configure the appearance of any page of output sent to a printer or the screen.
This chapter shows how you can also configure the way in which the RIP works, allowing you to get
the best performance from the RIP working with your particular computer, network, and output
devices; together with system software and any other applications running on the computer.
You have control over a variety of settings, including the following:


The folders in which certain files are placed by the RIP.



The page buffer mode that the RIP uses.



The use of buffers in memory.



Job timeouts.



Memory allocation.

All of the options described here are available from the Configure RIP dialog box or subsidiary dialog
boxes.
You can also reset the RIP to its factory settings, as described in Resetting the Navigator RIP to
default values on page 188, or choose a different language to be used in dialog boxes, menus, and
messages, as described in Choosing the user interface language on page 188.

Navigator RIP version 9

User Manual

177

Configuring the RIP

7.1 Configure RIP dialog box
The Configure RIP dialog box is displayed when you choose Configure RIP from the Navigator RIP
menu or type Ctrl+R. (If there is an Input Queue menu, you must stop the input queues before you can
choose Configure RIP: choose Stop Input Queue from the Input Queue menu.)

Figure 7.1 Configure RIP dialog box

Section 7.2 through Section 7.6 describe the use of items in this dialog box. Extras on page 185
describes the use of the dialog box displayed when you click the Extras button. The Options button
leads to another subsidiary dialog box: described in Control of page buffering modes on page 179; and
from Specifying prep files on page 186 through to Disable sounds on page 188.
To view the current memory configuration select Navigator RIP > Memory Statistics. A message of the
following type appears in the Navigator RIP window:
Total Memory Available: 3616668 kB
Memory Left For System - Requested: 250873 kB, Actual: 250873 kB
Network Buffer - Requested: 64 kB, Actual: 64 kB
Printer Buffer - Requested: 20480 kB, Actual: 20480 kB
Memory available for RIP: 1887104 kB

7.2 How the Navigator RIP controls files
You can configure the RIP so that certain files are always kept in particular folders on your machine.
You can specify the following:


Workspace folder.



Page buffer folder.

7.2.1 Workspace folder
This folder is used as general disk workspace. If there is not enough RAM available, the RIP will create temporary files in this folder to use as workspace. This might occur if you are processing jobs that
contain very large images.

178

User Manual

Navigator RIP version 9

7.3

Control of page buffering modes

By default, the workspace folder is called WorkSpace, and is found in the SW folder. You can specify
another location for the workspace by clicking the Change button in the Configure RIP dialog box and
specifying a folder of your choice.
The amount of disk space required for workspace will vary a lot from job to job. It is worth remembering that jobs containing large images scanned at high resolution will often produce very large workspace files, amounting even to many megabytes. Simple jobs, however, may require none at all.

7.2.2 Page buffer folder
When the RIP buffers pages to disk, they are placed in the page buffer folder. By default, this is called
PageBuffers, and is found in the SW folder. If you want to choose somewhere else, click the Change
button in the Configure RIP dialog box.
Note: The MediaSavingDir is located as a subfolder to the PageBuffers folder. Do not select the MediaSavingDir as the location for page buffers.
Pages are normally compressed when they are buffered to disk, so it is hard to estimate how much
space will be needed for the page buffer folder, because compression ratios can vary.
When the RIP is in either of the single modes, any stored page buffer is deleted once the page has been
printed.
In one of the multiple modes, old pages can be kept if enough space is available. These pages can be
deleted automatically as required, by selecting the appropriate Delete option in the Output Controller.
(See Chapter 4, Navigator RIP Output Methods.)
Note: The choice you make for the Delete option is remembered between RIP sessions, by recording it
in the page buffer folder. Thus, the choice is lost if you choose a new page buffer folder, but is found
again if you return to using the original folder.
The page buffer folder should be held on a local disk, rather than on a server. In addition, if you are
using an output device with a very high data rate, this disk must be fast enough to keep up with the
printer.

7.3 Control of page buffering modes
The options in the Configure RIP dialog box allow you to decide whether or not pages will be buffered on disk, and if they are, whether they will be compressed automatically.
Chapter 4, Navigator RIP Output Methods, gives full details of what happens when you use the various page buffering modes. The following text tells you how and why to choose a particular mode.

7.3.1 How to choose the page buffering mode
You can choose which mode to run the RIP in by selecting one of the items in the Page buffering dropdown list of the Configure RIP dialog box.

Navigator RIP version 9

User Manual

179

Configuring the RIP

7.3.2 Using a printer that can stop / start
Some background information may help you understand this feature. Several output devices supported
by the RIP require a continuous high-speed flow of data when they are imaging while others can stop
and restart (stop / start) when there is a pause in incoming data, with little or no effect on the produced
image. In many of the printers supported by the Navigator RIP, stopping has no bad effect and may
pass unreported. However, in many imagesetters, stopping can produce some visible difference in the
produced image so these imagesetters report to the RIP the fact that they have stopped / started.
Normally when outputting, if the printer reports a stop / start, the page will not be output. However,
when using Single, Multiple, or Multiple Parallel mode, the RIP will always make page buffers on
disk, and if your system is configured with a sufficiently fast disk, the printer will never stop / start. If
the disk may not be fast enough, then you can set the Allow stop / start option in the Configure RIP
Options dialog box to allow the page to output.
When using Single (if required) mode, if the printer runs so fast that it catches up with the data being
supplied by the RIP, the RIP will create a page buffer containing the data for the current page.The RIP
will then reprint that page before carrying on with the next page.
However, if your printer can stop / start, you have two options:




Allow a page buffer to be created and output again. If the page buffer still cannot be output fast
enough to keep up with the printer, the job will be aborted.
Stop the printer until enough image has been processed, and then start the printer again.

You can choose which of these should be done from the Configure RIP Options dialog box, as shown
in Figure 7.2. Display this dialog box by clicking on the Options button on the main Configure RIP
dialog box.

Figure 7.2 Configure RIP Options dialog box


180

If you select the box labeled Allow stop / start, the second option will be used. If the box is not
selected, a page buffer will be created and the page output again. By default, the box is not
selected.

User Manual

Navigator RIP version 9

7.3

Control of page buffering modes

Even if your printer allows stop / starting, you may not necessarily want to use this feature. Stopping
and starting some printers will cause a degradation in the image.

7.3.3 Compressing page buffers
The box labeled Compress page buffer in the Configure RIP dialog box controls whether or not page
buffers are compressed as they are created. By default, page buffers will be compressed. The advantages of this are:





It saves disk space‚ the compressed page buffers are smaller.
It is likely to be fast‚ the computer running the RIP is likely to be able to produce image data
faster than the disk can receive it. Writing smaller files to disk for compressed buffers will save
time.
It reduces the possibility of banding in printers that require a very high data rate. Compressed
page buffers allow the RIP to send data to the printer more quickly and prevent banding in the
output.

The data rate of a printer is the speed at which it accepts data for printing. Many printers require a data
rate in the range 1 through 2 MB per second. On some platforms, this is only possible with compressed page buffers.
For some combinations of processor speed, disk capacity, and disk speed, you may wish to limit the
use of compression. You can do this using the Minimum compression ratio option in the Configure RIP
Options dialog box, as described in Minimum compression ratio on page 181.
There are very few cases where you will always want to use uncompressed page buffers. If you do
want this choice, clear the Compress page buffer box.

7.3.4 Minimum compression ratio
This option in the Configure RIP Options dialog box has an effect only when you have selected the
check box Compress page buffer in the Configure RIP dialog box. It allows you to limit the use of compression to cases where there is a significant saving of disk space. For example: if the value you enter
here is 60%, the RIP compresses only bands in page buffers that compress to a size smaller than 60%
of their uncompressed size.
The value you should enter depends on the details of your system and the relative importance you
attach to minimizing disk usage or processing time. Typically, useful values are in the range 50%
through 100%. Enter a value of 100% to have all bands compressed. You may want to choose a much
lower figure where there is a large amount of fast-access storage and compression is slow in comparison to disk access.

Navigator RIP version 9

User Manual

181

Configuring the RIP

7.4 Job timeout
The job timeout allows you to control when the RIP will stop trying to process a job. This is useful for
various reasons:




It can protect against infinite loops in PostScript language code. If there is an infinite loop in a
job, it will never finish processing. Using a timeout ensures that, after a set period of time, the
RIP will stop processing such jobs.
By altering the timeouts available in the RIP, you can to some extent prevent loss of productivity by timing out complex, but correct, jobs before they consume too much machine time.
(Subsequently, you can rerun such jobs under operator control and supervision: for example,
with more resources temporarily devoted to the RIP.)

7.5 Threads and parallel processing
Parallel processing is enabled in all RIPs running on a suitable hardware platform. The Threads option
in the Configure RIP dialog box allows manual configuration of this option.

7.5.1 Multi-threading
The form of multi-processing used by previous SMP versions of the RIP had a number of disadvantages compared to the threaded model in terms of memory usage and communication between processes. As a result, a more suitable multi-processor, multi-threaded model has been developed.
Multi-threading enables the RIP to take advantage of hyperthreading and multi-core CPU architectures as well as multiple processors.Only rendering is multi-threaded: interpretation is not.
A selector has been added to the Configure RIP dialog to allow automatic configuration (using one
thread per processor core) or manual configuration of the number of threads. The default for a multithreaded RIP is automatic selection indicated by a configuration file value of 0 (zero). If required, you
can manually override the automatic setting. You should set this value equal to the number of processors available in your system: this will produce the fastest rendering. Other, smaller, values may be
useful in testing or troubleshooting.
Values of threads up to 160 may be entered.
Note: The Watermark RIP is available as a single threaded version only.

182

User Manual

Navigator RIP version 9

7.5 Threads and parallel processing

Figure 7.3 Threads option

Alternatively, you can select Per processor core, in which case the RIP will calculate the optimum number of threads for the processors cores on your machine.

7.5.1.1 Memory per renderer thread
The Memory per renderer thread option in the Configure RIP Options dialog allows you to assign a
specific amount of memory to each renderer. This defaults to 2 MB per renderer, is set in an ExtraStart
file called SetMaxBandMemory, and can be overridden using HqnOEM.

7.5.2 Network buffer size
This buffer lets the RIP read data from the input source before actually needing to process it. Having
this ability has two advantages:


It increases throughput.



The application that is sending the data to the RIP becomes free sooner.

7.5.3 Increasing throughput
With many jobs, there are large amounts of data to be read, often across slow networks, so it is desirable to use any available time reading in the data, rather than waiting for the RIP.
For example, when printing the Seybold Musicians test job (approximately 32 MB of PostScript language code, in four separation pages of 8 MB), a network buffer of 8 MB is desirable, since this
means that while one separation is being processed, the next one can already have been read in, ready
for processing when the previous one is finished. Without a network buffer, when one page is finished,
the RIP would have to wait for 8 MB to be read slowly from the input before it could be processed.

7.5.4 Freeing the sending application
The network buffer also increases productivity in the workplace, by freeing the applications sending
jobs sooner. You will be able to work with the application again as soon as the job has been read into
the network buffer, even though the RIP may only have processed a small portion of it.

Navigator RIP version 9

User Manual

183

Configuring the RIP

For example, when printing the Seybold Musicians test job, your sending application can be freed in
about three minutes if a 32 MB network buffer is used, even though the job might take 10 minutes to
output overall. On smaller jobs, such as the Seybold Trout test (approximately 200 KB of PostScript
language code), it is possible to free your application in about 30 seconds, even though the job will
take up to five minutes to output overall.
To change the size of the network buffer, enter the number of KB you require in the text box labeled
Network buffer in the Configure RIP dialog box. It is 64 KB by default. If there is not enough memory
for the requested network buffer, its size will be reduced automatically.

7.6 Printer buffer size
The printer buffer is used to store processed raster data that is ready to be sent to the printer.
When outputting, data is always placed in the printer buffer before being copied out to the printer as
required. In most cases, if the printer is not continuously fed data, one of the following may happen:


Banding (gaps) may appear in the output.



Pages may be aborted (for example, in a laser printer).



The printer may stop / start.

This is known as data underrun.
To avoid data underrun, the RIP must ensure that the printer buffer never becomes empty. However at
any given time, you cannot guarantee that the RIP is sending data to the buffer‚it may be processing
the next page of data if you are running in Multiple (Parallel) mode, or there may be other applications
running that the RIP has to wait for. If the printer buffer empties and you get data underrun, try making the printer buffer larger.
For example, assume you are sending output to a fast 900 KB/second printer, while using another
application at the same time, and that application does a screen update that takes 3 seconds (during
which time the RIP is locked out). In that time, the printer could consume 3 900 = 2700 KB
(2.7 MB) of data. To prevent data underrun, you must ensure that you have a printer buffer at least this
big.
In practice, a printer buffer in the range 4 MB through 12 MB is usually adequate. This total includes
any buffering memory on interface cards or in the output device, but if there is such memory it needs
separate installation or configuration. From the memory that the RIP controls, it allocates a minimum
of 20480 KB buffer space by default.
To find the best setting for your system, try starting with the default buffer size, and if you have problems with data underrun, increase the buffer size until the problem goes away. If this fails, you may
need a faster disk or more memory. The ability to roam large or multiple page buffers is related to the
printer buffer size.
To change the size of the printer buffer, enter the number of kilobytes (KB) you require in the text box
labeled Printer buffer in the Configure RIP dialog box. If there is not enough memory for the requested
printer buffer, its size will be reduced automatically.
The figure you enter is the minimum amount of memory that the RIP will use for buffering output.
Sometimes, especially in Single (if required) mode, the RIP will use a much larger amount of memory.

184

User Manual

Navigator RIP version 9

7.7

Extras

Note: The amount of printer buffer memory needed varies according to job and device resolution, output device speed, computer speed, disk speed, and so on. Experiment with a larger buffer if necessary.

7.7 Extras
The Configure RIP Extras dialog box, available from the Configure RIP dialog box, is used to switch
on screening strategies and layered options by entering passwords.

Figure 7.4 Configure RIP Extras dialog

Note: There are other places where you may need to enter a password. Some plugins require you to
enter a password elsewhere; read the documentation for the plugin carefully to find out where. Also,
some language options for the user interface can require you to enable the language before you can
use it‚ see Choosing the user interface language on page 188 for details.
See Screening Library on page 170 for details of how to use the screening options and how to obtain
and enter passwords for all options requiring passwords to be entered in the Configure RIP Extras dialog box.
The other entries in the list can include:


ColorPro, to enable the color management options within the Navigator RIP. ColorPro is

described in the separate ColorPro User Guide.


TrapPro to enable the TrapPro trapping options within the RIP. See the separate TrapPro User

Manual for full details.


HDLT, to enable Harlequin display list technology.



PostScript, to enable PostScript language input.



PDF, to enable PDF input.



XPS, to enable XPS input.



Simple imposition. See Chapter 10, Simple Imposition for full details.

Navigator RIP version 9

User Manual

185

Configuring the RIP



TIFF/IT, to enable TIFF/IT-P1 input.

Note: There is an optional TIFF/IT-P1 output plugin. If this plugin is present, it shows the entry:
TIFF/IT-P1, TIFF/IT-P1. Be careful to select the correct entry for input or output before entering a
password.


Media Saving to enable the Media saving facilities.

There may also be entries for plugins that require a password. These entries can be the result of:


Security dongles that require a password before allowing use of plugins.



Plugins that require a password for each device type that they provide.



Multiple device plugins that require a password but group several device types so that they can
be enabled with a single password.

You should receive appropriate instructions and passwords when receiving these plugins and security
dongles.

7.8 Specifying prep files
Prep files are libraries of PostScript language routines that can be downloaded into a RIP and used
whenever necessary. Many LaserWriter drivers require certain libraries to be loaded before they can
be used.
You can select the following options in the Configure RIP Options dialog box.

7.8.1 Automatic prep loading
This is a built-in mechanism that, if the option is selected, automatically loads the correct prep file
whenever it is needed. This can save a lot of time for applications printing over networks, especially
when these applications require different prep files. For example, different prep files are used by different LaserWriter drivers on different machines by different applications.
Automatic prep loading is selected by default.

7.8.2 Startup prep
If this box is selected, the prep file selected in the drop-down list is pre-loaded when you start up the
RIP. Select the prep file that is used most often by the jobs sent to the RIP.
You do not have to use this option if automatic prep loading is already switched on, but it can be a useful option if a number of people on the network are using the same LaserWriter driver. If the correct
startup prep is already loaded, it can save a few (2 - 5) seconds on each job.
You can use automatic prep loading at the same time as a startup prep.

7.9 Navigator RIP memory allocation
The options in the Configure RIP Options dialog box, allow you to specify the memory allocation for
the RIP, seeConfigure RIP Options dialog box on page 180.

186

User Manual

Navigator RIP version 9

7.9

Navigator RIP memory allocation

If the Memory for RIP option is not selected, the RIP is allocated all the available physical memory,
less the amount specified in the Minimum memory left for system field.
If you want to reduce the amount of memory allocated to the RIP, select the Memory for RIP option
and enter the value in the text box. The RIP is allocated this amount of memory, less the amount specified in the Minimum memory left for system field.
The Minimum memory left for system field lets you reduce the allocation for the RIP so that memory is
left for the operating system and any other running applications. If this value is too small, the operating system will start paging, which will degrade performance.
Note: If the Minimum memory left for system value is higher than the Memory for RIP setting, the following warning is issued:
"Warning: The combination of "Minimum memory left for system" and "Memory for Rip" settings will force the Rip
to run with x Kb of memory. This can result in unexpected behaviour. Please consult the "Navigator RIP memory
allocation" section of the documentation."

where x is a number.
If a particular job is so large that it cannot all be fitted into memory at once, the RIP starts to paint partial page buffers to disk. To try and avoid this, you can allocate extra temporary memory for the RIP,
using the Memory reserve for RIP option. This option allows the RIP to use additional physical and virtual memory while completing the job.
Note: If you allocate a large amount of extra temporary memory, the operating system may start paging. Paging would slow the system down more than painting partial page buffers to disk. We recommend that you allocate less than 4 MB of extra temporary memory.
There are some instances when the RIP cannot paint partial page buffers to disk: for example, when
recombining preseparated jobs or using TrapPro. The RIP cannot complete the job if it does not have
enough memory. In such instances, select the Allow use of all available memory option. The RIP will use
all the available physical and virtual memory to try and complete the job. Using all the memory may
severely degrade performance until the job has finished.
From the total memory allocated to it at startup, the RIP allocates the printer and network buffers. All
memory not used for these buffers is used by the RIP for processing jobs.
The final allocations used are reported in the Navigator RIP window when the RIP starts up.
If there is insufficient memory to allocate the buffers requested, the RIP tries the following methods of
automatic recovery, in the order shown:


Reducing the network buffer to a minimum of 64 KB.



Reducing the printer buffer to a minimum of 512 KB.

If there is still not enough memory to give the RIP at least 4096 KB, the RIP will display a warning
and quit.
The amount of RAM used by the RIP is controlled by the Windows XP (or later) Operating Systems,
which are designed to be adaptive. It increases the memory allocation of long-running applications
that use large amounts of memory. On the other hand, the RIP allocates as much Virtual Memory as is
needed when large jobs are processed, and on completion of the job returns that memory to the pool.
Thus the value of VM would be high when a large job is running and low on completion. When exam-

Navigator RIP version 9

User Manual

187

Configuring the RIP

ining your system's memory allocations it is more useful to look at the inter-job minimum of committed VM rather than the size of RAM.

7.10 Minimum free disk space
The Navigator RIP allows you to ensure that it leaves free a minimum amount of disk space, which is
good practice and allows for use by other applications. Specifying this reserved disk space is important for use with the two RIP modes‚ Multiple and Multiple (Parallel)‚that can produce multiple buffers, where it ensures that the disk is not completely filled up with an unlimited number of page
buffers.
The default value of the Disk space left for system option is 50 MB. You may want to increase it to
reserve disk space for other applications running on the same machine, such as spooling programs. A
reasonable value should be near the size of the largest files regularly created or copied on the relevant
disk.

7.11 Disable sounds
Select this box in the Configure RIP Options dialog box to suppress the system beep normally generated when the RIP encounters an error.

7.12 Resetting the Navigator RIP to default values
If you decide that you want to revert to the default values that the RIP is supplied with, open a command (DOS) window in the folder holding the RIP application and type this:
C:\PATH>HARLQN_LS.exe -RESET

Note: In the command line, change HARLQN_LS.exe to the exact name of the application that you are
using.
A dialog box appears, asking if you wish to return to the factory defaults.


Click Yes if you wish to reset any part of the current configuration.



Click No if you wish to keep all of the current configuration. (the RIP starts up normally.)

If you click Yes, the RIP displays several dialog boxes that allow you to reset specific parts of the configuration, one after the other. For each dialog box, click the Yes button to reset all the configuration
information described in that dialog box. Click No to keep that part of your configuration.
The RIP allows you to reset most parts of the configuration in this manner, including Page Setups, RIP
configuration, media management information, and window positions.
After the last dialog box, the RIP starts up normally.

7.13 Choosing the user interface language
You are asked to make a choice of the language to be used in dialog boxes, menus, and messages when
you start up the RIP for the first time. Later, you can check the exact language in use or change the
language, for most combinations of languages.

188

User Manual

Navigator RIP version 9

7.13 Choosing the user interface language

7.13.1 Requirements and limitations
There is no problem in changing language if both languages are chosen from English and most Western European languages‚ technically described, those languages that use encodings of the ISO-Latin
character set. There is also little risk in switching from ISO-Latin to a language that uses a two-byte
character encodings: for example, Japanese, Traditional Chinese, and Simplified Chinese. There is a
higher risk of problems if you attempt to switch between two languages that use different two-byte
character encodings.
The operating system of your computer must support the language you wish to use. You are also likely
to require the RIP localization files and a password from your supplier before you can change the language used by the RIP. If you have to install any files, restart the operating system and the RIP before
proceeding.

7.13.2 Procedure
To check which languages are available or to switch to another available language, choose the Navigator RIP > Language menu option. The Select User Interface Language dialog box appears, as shown in
Figure 7.5.

Figure 7.5 Select User Interface Language dialog box

The dialog box shows you which languages are available in a multi-column list. A language is available for immediate use if the entries after its name or code (in the Language column) are all Present or
Yes.
The columns have these meanings


The Messages and Resources columns show if parts of the RIP localization are present.



The Locale column shows if the operating system supports the language.



The Enabled column shows if the RIP localization is enabled, when the entry is Yes; or disabled, when the entry is No.

Click Cancel if you do not wish to make a change.
You can supply a password to enable a language if the only thing making that language unavailable is
a No entry in the Enabled column. Select the row for your chosen language and click Enable. In the
password entry dialog box, enter your password and click OK. You should now see that the language
is enabled. Check the password if the language is not enabled. (If you still have problems, click Cancel
to continue using your previous user interface language while you obtain support from your supplier.)

Navigator RIP version 9

User Manual

189

Configuring the RIP

To use an enabled language, select your chosen language and click OK. The RIP displays a dialog box
asking if you wish to confirm your choice and quit the RIP. Click Yes if you are sure, and then click
OK to dismiss the second confirmation dialog box.
When you restart the RIP, you should see that it is using your chosen user interface language.
Note: You may still see a small number of options in lists or messages appearing in English or another
language. This is normal. For example, the Feature and Calibration lists in the Edit Page Setup dialog
box display the names of files, which remain unchanged as the user interface language changes. Similarly, the Navigator window displays messages if they are produced directly by PostScript language
jobs and, if needed, some very rare and technical error messages.

190

User Manual

Navigator RIP version 9

8
Configuring Input
This chapter describes the different ways in which the Navigator RIP can accept its input, and how to
configure the RIP to use each type of input. Chapter 5, Configuring Output Formats, describes the different ways in which you can control output from the RIP, using Page Setups.
There are several ways of providing input to the Navigator RIP:






Using one or more managed inputs, as described in Input management on page 192, and the
following sections. This is the preferred method for routine use because, in general, the managed inputs allow users on many machines to submit jobs to the RIP.
Using the Print File menu command, as described in Using the Print File command on page
216. This command allows a user on the machine running the RIP to print all of the job types
possible on that installation of the RIP. You can use Print File while managed inputs are active.
Entering PostScript language code interactively by typing at a prompt on the machine, as
described in Entering PostScript language code by hand on page 239. You must disable other
inputs for the duration of your interactive sessions in order to do this.

When you use managed inputs or the Print File menu command, you can print several types of job.
The available types depend on the details of your installation of the RIP. Some types have associated
settings in Page Setups, may require enabling with passwords, or require other care in use. The possible types, with references to full descriptions of their use, are:


PostScript language files (PS) and Encapsulated PostScript files (EPS), both described in Printing PostScript language files on page 217.



Portable Document Format (PDF) files, described in Printing PDF files on page 218.



XML Paper Specification files (XPS) files, described in Printing XPS Documents on page 230.



JPEG and JFIF files, described in Printing JPEG and JFIF files on page 231.



TIFF/IT-P1 files, described in Printing TIFF/IT files on page 232.



TIFF 6.0 files, described in Printing TIFF 6.0 files on page 235.



Navigator RIP page buffer files, described in Printing page buffer files on page 237.

Navigator RIP version 9

User Manual

191

Configuring Input

8.1 Input management
In the same way that the RIP uses output plugins to provide output sources, it uses input plugins to
provide input sources.
Input plugins can do the following:







Input to the RIP, for example, as a source of jobs. (When installed, these plugins are obvious
parts of the RIP: the description of these plugins and their configuration forms the bulk of this
chapter.)
A PostScript language device on which you can open a file and read or write from a PostScript
language job. (This is not seen by the end user.)
A filter to manipulate data. (This is not seen by the end user.)
A source of asynchronous actions. (Most of these actions are small, specialized tasks and not
directly related to output of a user job. For example, one such action enables the RIP to provide
a list of installed fonts while busy with a job for output.)

There are a number of input plugins supplied with the RIP, each providing users with the ability to
submit jobs. Managing input plugins on page 193 describes the way in which you can manage these
plugins and the inputs they provide. The supplied inputs are:


AppleTalk. This lets the RIP accept input from any AppleTalk network connected to the
machine running the RIP.
Note: The AppleTalk plugin is not installed on Windows Vista or Windows 7 where this protocol it is not supported.
See Using the AppleTalk input plugin on page 196 for more details.



NT Pipe. This provides a named pipe allowing high speed communication with an application
such as an Open Prepress Interface (OPI) server.
See Using the NT Pipe input on page 197 for more details.



Spool Folder. This lets you specify multiple independent folders into which users or applications can place jobs to be printed. The RIP checks for the presence of files in these folders and
prints each one automatically.
See Using the Spool Folder input folder on page 200 for more details.



Socket plugin. This allows input to arrive over a network, which can contain different types of
computer, using a TCP/IP socket.
See Using the Spool Folder input folder on page 200 for more details.



Asynchronous socket plugin
This is similar to the socket plugin but is only suitable for a limited number of jobs. Typically,
these are small jobs performing control or monitoring functions, rather than imaging.
See Using the Spool Folder input folder on page 200 for more details.

192

User Manual

Navigator RIP version 9

8.2



Managing input plugins

Asynchronous socket quit plugin
This is similar to the asynchronous socket plugin but has the single purpose of causing the RIP
to quit. It does not receive any jobs.
See Using the Print File command on page 216 for more details.



Serial port, on PCs and platforms running the UNIX operating system. This supports the Adobe
Serial Lines Protocol, and lets you connect two machines by their serial lines, so that input can
be accepted by a RIP running on one of them.
See Printing PDF files on page 218 for more details.

Each of these plugins can be thought of as analogous to a multiple device output plugin, except that
they provide inputs, rather than outputs.

8.2 Managing input plugins
You control input plugins using the Input Controller. Before creating new inputs or changing existing
ones, check that you have an appropriate Page Setup to associate with each input. (While creating
Page Setups, you can keep the Input Controller displayed, but not the subsidiary dialog boxes.)
Display the Input Controller dialog box by choosing the Navigator RIP > Input Controller menu option,
or clicking the tool bar button. Figure 8.1 shows the Input Controller dialog box.

Figure 8.1 Input Controller window

The Input Controller is similar to the Device Manager, described in Section 5.12, Multiple device output plugins. The main list shows the input sources currently available. Each input source can be turned
on or off individually using the buttons; the state is displayed in the Status column.
Each row in the list represents one particular source, and contains:


The Name for the input source. This is used to identify the source within the RIP. It may also be
used by the input plugin itself.



The Type of input. This determines which input plugin the RIP uses.



The Page Setup. This is the Page Setup used by all jobs arriving through this source.

Navigator RIP version 9

User Manual

193

Configuring Input





The Enabled state. This should be On to make the source available when you start the RIP or
start inputs.
The Status. This can be Stopped, Idle, or Busy.
An input is stopped either because all inputs are stopped, because you have disabled this input
in the Input Controller (using Off), or because of a problem when trying to start that input. An
idle input is ready to receive a job but none is arriving. A busy input is actually receiving a job.

You can also choose to see the same information about items that are not controllable from the Input
Controller. The check box below the list gives you this ability:
Show protected channels

Select this box if you wish to see, but not control, the status of protected
channels. This box is grayed out if there are no protected channels.
Protected channels are channels that have been created outside the Input Controller‚ possibly by executing PostScript language commands in configuration files that the RIP used when starting up and marked as being outside
routine user control. Typically, a protected channel is not an input source for
imaging jobs: instead, it performs one of the other functions described in
Input management on page 192.
Below the list of sources are several buttons that allow you to perform the various actions described in
sections 8.2.2 through 8.2.7.
When you have finished making changes in the Input Controller, you can keep it visible as a way of
monitoring which inputs are submitting jobs or close it using the Navigator RIP > Input Controller
menu option or the tool bar button.

8.2.1 Turning on the input system
To start receiving jobs from the configured and enabled inputs, choose Start Inputs from the Navigator
RIP menu, or type Ctrl+I. When you do this, there is a delay of a few seconds as the various defined
input sources are initialized, and then the RIP starts to accept jobs from those sources.
The status area of the tool bar shows the searching for input symbol (a torch or flashlight shining on an
arrow).
A new menu appears in the menu bar, called Input Queue. This menu has these options:


Kill Current Job. This causes the job currently processing to be aborted. It may take a few sec-

onds.


Stop Input Queue. This turns off the input system when the job currently processing has fin-

ished.


Abort Input Queue. This aborts the job currently processing and then turns off the input system.

8.2.2 Adding a new input source to the list
You can create many different input sources for each input plugin. For example, you could create 5
spool folder input sources and 10 AppleTalk input sources.

194

User Manual

Navigator RIP version 9

8.2

Managing input plugins

Note: The AppleTalk plugin is not installed on Windows Vista or Windows 7 where this protocol it is
not supported.
To add a new input source to the list:
1. Click the New button in the Input Controller. The RIP displays an Input Channel Edit dialog
box, similar to that shown in Figure 8.2, allowing you to fill in the details for this source.

Figure 8.2 Input Channel Edit dialog box

2. Type a name for the plugin device in the Name text box.
The name is used to identify the source within the RIP. It may also be used by the input plugin
itself. If you create an AppleTalk input device, when you start the inputs a printer of this name
becomes available on the AppleTalk network.
3. Choose the plugin type from the Type drop-down list.
4. Choose a saved Page Setup from the Page Setup drop-down list: the RIP applies this Page Setup
to each job arriving at the source.
5. If the plugin is to be initially turned on, select the Enabled check box.
6. Click the Configure button to display an input plugin Configuration dialog box, allowing you to
specify details relevant to the plugin you have chosen.
The Configuration dialog box varies according to the type of plugin chosen. It is used to give
details about how the input is to be handled, and to set up any hardware associated with the
source. See Input management on page 192 for a list of input types and page references to their
configuration and use.
7. When you have specified all the details for the new source, click OK.

8.2.3 Copying an input plugin
When you have created an input plugin, you can copy it to create other inputs of a similar type. This
can save you some effort, depending on the complexity of the Configuration dialog box.
To copy an existing input, select the entry in the Input Controller and click the Copy button.
You must give the copied input a new name and you will probably need to alter some details in the
Configuration dialog box. For example, only one active input can use a particular spool folder or network input at one time‚ but you can have two or more inputs using the same source, provided that you
enable only one at a time.

Navigator RIP version 9

User Manual

195

Configuring Input

8.2.4 Editing the details for an input source
To edit the details for an existing input source, do one of the following:


Select the entry in the Input Controller and click the Edit button.



Double-click the entry in the Input Controller.

The RIP displays an Input Channel Edit dialog box, allowing you to edit the details for the selected
plugin. For full details of using this dialog box, see Adding a new input source to the list on page 194.

8.2.5 Configuring an input plugin
Configuring an input means giving details about how the input is to be handled, and setting up any
hardware or software associated with the source.
To configure an existing input plugin, select it in the Input Controller and click Edit. The RIP displays
the Input Channel Edit dialog box. Click Configure to see the Configuration dialog box for the selected
input. See Input management on page 192 for a list of input types and page references to their configuration and use.

8.2.6 Deleting an input source
To delete an input source from the RIP, select it in the Input Controller and click the Delete button.
(You can select multiple inputs and delete them in one action.)

8.2.7 Enabling and disabling input sources
To enable an input source, select it in the Input Controller and click the On button. To disable a source,
select it and click the Off button. Using these buttons has the same effect as selecting or clearing the
Enabled check box in the relevant Input Channel Edit dialog box.
When the selected input source is enabled then the On button is disabled, and when it is not enabled
then the Off button is disabled.
You can select several input sources and then turn them on or off together.
When an input plugin is enabled, the RIP automatically publishes it when starting input queues, meaning that the input plugin can be used to send jobs to the RIP.
To make enabled inputs active, choose Navigator RIP > Start Inputs or click the tool bar button that has
a picture of a green arrow and traffic light. (See Section 8.2.1, Turning on the input system.)
To stop all enabled inputs, choose Navigator RIP > Start Inputs again or click the tool bar button that
has a picture of a red arrow and traffic light.

8.3 Using the AppleTalk input plugin
An AppleTalk input source publishes a name over the network. This name appears in the Chooser on
Macintosh computers running Mac OS 8/9 and Mac OS X when they are connected to the network,
making the RIP available just like a LaserWriter. Other, non-Macintosh, computers connected to the

196

User Manual

Navigator RIP version 9

8.4 Using the NT Pipe input

network and able to use AppleTalk can also use the RIP as an AppleTalk printer. In complex networks,
there may be a need for extra actions before all computers can use a new printer.
Note: The AppleTalk plugin is not installed on Windows Vista or Windows 7 where this protocol it is
not supported.

8.3.1 Configuring an AppleTalk input source
To configure an existing AppleTalk input source, select the source in the Input Controller and click
Edit. The RIP displays the Input Channel Edit dialog box. Click the Configure button. The AppleTalk
configuration dialog box appears, as shown in Figure 8.3.

Figure 8.3 AppleTalk Configuration dialog box
Wait timeout

This value sets the length of time, in minutes, that the input source waits for
data. If no data is sent for that length of time and the RIP is waiting for data,
the job is aborted.

Abort on error

This control sets the behavior of the input plugin on detecting an error. By
default, this box is selected, which means that an error causes an immediate
abort. This is not the typical behavior of a PostScript language compatible
interpreter but it may save considerable time spent in transferring data which
is merely flushed (ignored) by the interpreter.
Clear this box if you encounter problems with network software or wish to
ensure full compatibility with other PostScript language compatible interpreters.

8.4 Using the NT Pipe input
A number of third party applications, most notably Open Prepress Interface (OPI) servers, are able to
communicate with PostScript language compatible RIPs running under Microsoft Windows NT using
named pipes. A named pipe is an interprocess communication method that allows two Windows NT
applications to exchange large amounts of data very efficiently.
Note: In a typical OPI workflow, high resolution images are stored on the OPI server machine, are
included into print jobs, and are transferred over the network to output devices. This operation frees
workstations from moving large image files, but large files must still travel from the OPI server to the
RIP.
The NT Pipe input plugin for the RIP allows OPI servers or other applications to supply data to the
RIP via named pipes.

Navigator RIP version 9

User Manual

197

Configuring Input

There are two possible cases:




The RIP and a suitable application can share a single multiprocessor machine, and use a named
pipe to communicate. This allows the other application to deliver jobs to the RIP at much faster
speeds than it can deliver jobs to a networked printer (provided by the Navigator RIP).
With a single processor machine or an application that cannot share a multiprocessor machine,
the RIP and the other application must run on separate Windows NT systems connected
through a network. Even in this case, using named pipes can deliver much better performance
than printing over an AppleTalk network.

8.4.1 Installing the plugin
To use the RIP named pipe support, you need a plugin file in the SW\Inputs folder. The file name is different for different kinds of processor:


For Intel 486 and Pentium processors, and compatible processors, the plugin file is called
ntpipe.i32.

Quit the RIP if it is running. If the plugin has been supplied with an installation program, use that and
follow the instructions. If you have no installation program, drag the appropriate plugin file into the
SW\Inputs folder.

8.4.2 Creating an NT Pipe input
When you have an installed plugin file, start the RIP and follow this procedure:
1. Click New in the Input Controller. The RIP displays the Input Channel Edit dialog box. Choose
NT Pipe from the Type drop-down list.
2. Give the input a suitable name and select a Page Setup. Select the Enabled box.
Note: The name you choose forms the last part of a longer network name for the pipe. We suggest that you choose a name that uses letters and numerals only (a - z and 0 - 9) and that is a
convenient length: do not include punctuation, space characters, or the wildcard characters
( ? and * ).
3. For most applications, you can now click OK to close the Input Channel Edit dialog box.
You can now read Connecting an application to the Navigator RIP on page 199 to see how to connect
an application to this pipe. If you have difficulty, or know that you need to change the default configuration, read Configuring the named pipe on page 198.

8.4.3 Configuring the named pipe
The Configuration dialog box allows you change another part of the name for the pipe and to allow
more than one connection to the same named pipe.
When configuring a front-end or server application to send data to the RIP using named pipes you
must enter the full name of the pipe. The format for the name is:
\\\pipe\\

198

User Manual

Navigator RIP version 9

8.4 Using the NT Pipe input

To get an actual name, replace  with the name of the computer running the RIP, replace  with the name entered in the Named Pipe Plugin dialog box, and replace  with the name
you entered in the Input Channel Edit dialog box.
If the RIP is running on a Windows NT system named BRICK, and the channel has been defined in the
RIP with the name Fred, the pipe name would be:
\\BRICK\pipe\ScriptWorks\Channel\Fred

Figure 8.4 Named Pipe Plugin dialog box
Pipe Prefix

If you wish to use a different scheme for pipe names you can change the prefix by clicking on the Configure button in the Input Channel Edit dialog box.
The RIP displays the Named Pipe Plugin dialog box.
For example, entering RIP in the Pipe Prefix field would make the full pipe
name:
\\BRICK\pipe\RIP\Fred

Pipe instances

Windows NT allows a named pipe to have a number of instances. This means
that, for each pipe of a given name, Windows NT will allow more than one
client (application) to open the pipe at any one time. The RIP plugin can then
service the clients in sequence, one at a time.
Some clients, for example Color Central from Imation Publishing Software
(formerly Luminous Technology), always expect to be able to connect to a
named pipe. For this reason you should normally create at least two pipe
instances. This allows the client software to reconnect to the pipe, in order to
send the next job, while the RIP finishes processing the previous job.
If you wish to change the number of pipe instances from the default value of
two you can do so in the Named Pipe Plugin configuration dialog box, as
shown in Figure 8.4 above.

8.4.4 Connecting an application to the Navigator RIP
Several applications include support for named pipe output. This is a general discussion: refer to the
manual for your application for details.
Once the RIP has been configured to accept named pipe input, you must configure the other application to use a named pipe for communication with the RIP.

Navigator RIP version 9

User Manual

199

Configuring Input

Typically, you do this:
1. Add a new printer to which the application can send data.
2. Select named pipe as the method of communicating with the printer.
3. Identify the particular named pipe to use, giving a name that matches one you have created in
the RIP. The general form of the name is:
\\\pipe\\

For example, when the machine is called BRICK, the pipe prefix is the default ScriptWorks\Channel, and the name (as entered in the Input Channel Edit dialog box) is Fred, then the full pipe
name is:
\\BRICK\pipe\ScriptWorks\Channel\Fred

A period ( . ) can serve as a shortcut for the name of your local machine. If the supplying application and the RIP are on the same computer, the pipe name could be:
\\.\pipe\ScriptWorks\Channel\Fred

4. Give whatever other information the application requires, and complete the procedure that
makes the printer available for use with the application.
If you have multiple copies of the RIP, or have published multiple NT Pipe input channels from a single installation of the RIP, you can repeat the same sequence for each channel.

8.5 Using the Spool Folder input folder
A spool folder input source regularly scans a specified disk folder (directory), and processes any PostScript language files (and other suitable files) that are placed there. Normally these files are deleted
after successful processing. The spool folder can be on a network file server, or the local machine.
Users create files from their applications. These applications can create the files directly in the spool
folder, or can create them elsewhere (for example, on the local system) for later transfer into the spool
folder.
The RIP can process some or all of the following file types using a spool folder: PostScript language
(PS), Encapsulated PostScript (EPS), Portable Document Format (PDF), TIFF 6.0, single TIFF/IT-P1
subfiles or TIFF/IT-P1 file groups if supplied in order, JPEG and JFIF files. With some preparation
you can also process page buffers from a similar version of the Navigator RIP. The available options
depend on your installation and configuration of the RIP.
Note: You cannot use a spool folder for printing FP TIFF/IT-P1 files without special care, because FP
files reference subfiles and the RIP must image the data in these files in a set order. If, in a spool folder
any of the CT, HC, LW, or FP files may arrive first, then the result may be partial images. The spool
folder can accept TIFF/IT-P1 files if the order of arrival and file naming can be controlled so that all
subfiles arrive before the FP file and you select the TIFF/IT-P1 option described on page page 203. If
the order of arrival or naming is unsuitable or unpredictable, using Print File from the Navigator RIP
menu is the simplest reliable method of ensuring that the RIP images the intended file or combination
of files.

200

User Manual

Navigator RIP version 9

8.5

Using the Spool Folder input folder

The RIP ignores types of files that it cannot print, and any files that you exclude intentionally by configuring the spool folder input.
You can exclude files based on their names. You may want to exclude files that resemble real jobs, but
that actually contain accounting or housekeeping information for the software that delivers files into
the spool folder. You may also want to exclude, or at least delay, real jobs with particular origins or
qualities. All this is possible so long as the file names have a recognizable prefix.
You specify which folder the RIP uses in the input plugin Configure dialog box, available from the
Input Controller. By default, this folder is called Spool and exists in the SW folder. If needed, you can
create several spooled inputs, each with its own folder, Page Setup, and exclusion list.
When you specify a folder accessed over a network, make sure that the folder automatically becomes
available to the computer running the RIP when that computer is restarted.
Because files are normally deleted as soon as they are printed, it is important to ensure that the RIP has
permission to delete files in the spool folder, particularly if the spool folder is on a network file server.
See Appendix A, Troubleshooting, for more details.
The files in the spool folders are processed in the order in which they arrive. However, if there are jobs
already in a folder when the RIP is started, or if a very large number of files have been queued, the
RIP determines the order of those jobs by the date stamps on the files.
Note: Spool folder input does not work with setups using PostScript LanguageLevel 1 compatibility
mode.

8.5.1 Spool input issues
The way the Spool input plugin detects whether a job has failed can be disturbed by the use of page
features such as Error Handler - Long and Error Handler - Short. In such cases, even though the RIP monitor may indicate that the job has failed, the Spool plugin may treat the file as Completed instead.
The same issue may apply to custom error handling code.
If your workflow relies upon the correct error action taking place, you should avoid the use of errorhandlers and instead diagnose such problems using different Page Setups.
Closing the spool input channel while files are still open can prevent the plugin moving or deleting
those files.

8.5.2 Configuring a Spool Folder input source
To create and configure a new Spool folder source:
1. Click New in the Input Controller. The RIP displays the Input Channel Edit dialog box.
2. Choose SpoolFolder from the Type drop-down list. Give the input a suitable name and select a
Page Setup. Select the Enabled box.
3. Click the Configure button. The Spool Folder Configuration dialog box appears.
Make the settings you wish, and click OK. Click OK again to close the Input Channel Edit dialog box.
The spool folder input becomes active, now or when you next start inputs. When the spool folder

Navigator RIP version 9

User Manual

201

Configuring Input

becomes active, the RIP reports the number of exclusions, that is the number of prefixes that it will
ignore. See the description of the Filenames prefix list option on page page 204 for details.

Figure 8.5 Spool Folder Configuration dialog box

This dialog box contains the following control items:
Spool Folder

The current spool folder is shown in the text field alongside this button. This
location is where the RIP detects the arrival of files and considers them as
possible jobs, by looking at the type of file and any file names excluded in the
Filenames prefix list.
Note: Choose a folder that is dedicated to receiving jobs. In particular, avoid
using folders where other files are arriving or changing. (For example, the
SW folder is a bad choice, because the log file changes with every job.)
Click the Spool Folder button to change this folder using the standard file
browsing dialog box. Alternatively, you can type a full path name in the text
field but be aware that any typing errors can cause an error or the creation of
a new folder.

Create Spool Folder if it does not exist 

Select this box if you want the RIP to create the named spool folders if they
do not already exist.

202

User Manual

Navigator RIP version 9

8.5

Using the Spool Folder input folder

The RIP creates the folders when the input channel becomes available for
use. This time can be immediately after you click OK in the Input Channel
Edit dialog box for an enabled channel, but you may need to choose Navigator
RIP > Start Inputs or enable the input channel before it becomes fully available.
Warn if Spool Folder does not exist

Select this box if you want the RIP to issue a warning if a folder named as a
spool, error, or completion folder does not exist.
Suppress startup warnings

If you have files present in the Spool Folder and then start the RIP, you will
be prompted with a warning that files already exist in this folder which you
must acknowledge before the RIP will start. If you would prefer to suppress
these startup warning messages and continue to start the RIP, select this
option. All files present in the folder will be processed.
HandleTIFF/IT files as one output group

Select this box if you want to process TIFF/IT-P1 files as a group, but only if
you can predict that both the file names and the order of arrival follow these
conditions.
All related files must have the same file name stem. For example, this is a
valid group of files: myfile.ct, myfile.lw, myfile.hw, and myfile.fp.
All subfiles must be in the spool folder before the FP file arrives and is ready
to print.
After processing a TIFF/IT-P1 group, the RIP moves or deletes all the related
files together, with the action depending on success or failure and the settings
of other controls in this dialog box.
If you leave this box unselected, the RIP processes the individual files as they
become available.
Note: When producing TIFF/IT-P1 files as output using the optional TIFF/ITP1 output plugin, the RIP satisfies the rules for having the related files treated
as a group.
Scan spool folder every  seconds 

The value in the text box specifies how often the RIP checks the Spool folder
for new files to be printed.
Time to wait for file to stabilize  seconds

The value in the text box specifies the number of seconds that the Spool
folder waits for the size of an arriving file to remain the same before assuming that it has been fully written and is therefore ready to be printed.

Navigator RIP version 9

User Manual

203

Configuring Input

Complete Folder

If a file successfully prints, the RIP moves it to the location specified in the
text field alongside this button unless the Delete files on completion box is
checked. Click the Complete Folder button to change this location using the
standard file browsing dialog box.

Delete files on completion 

Select this box if you want the RIP to delete files that the Spool folder succeeds in printing. Otherwise the RIP moves these files to the Complete
Folder.
Error Folder

If a file fails to print, the RIP moves it to the error folder specified unless the
Delete files on error box is selected. If a file prints successfully, the RIP moves
it to the Complete folder specified unless the Delete files on completion box is
selected.

Delete files on error

Select this box if you want the RIP to delete files that the Spool folder fails to
print. Leave this box clear if you want failed files to be moved to the Error
Folder. Note that a file is treated as an error if you abort it while it is being
processed.
Move/Delete All Files

With this option selected the spool plugin will either move to the error folder,
or delete any file which it does not recognize (such as badly formed PDF documents). The files are moved or deleted depending on the state of the Delete
files on error check box.
Warning: If you decide to use this option and you inadvertently choose to
point the spool folder at a directory containing important files (such as
C:\windows... or your SW folder), you will remove all files therein, resulting in
either a non-functional computer or non-functional applications. The plugin
deletes or moves all the files it cannot handle.
Move/Delete Valid Files

This option replicates the previous (pre Eclipse Release SP2), behavior of the
spool folder plugin. In this case, if a file is encountered which the spool plugin does not recognize it will leave the file in the spool folder and ignore it.
Valid files which cause an error will be treated according to the setting of the
Delete files on error check box.
List of Prefixes

This text field specifies files to ignore when they arrive in the spool folder, if
you have also selected the Do not process filenames with the following prefixes
box. The specification is based on the first part or prefix of the file names.
Prefixes are case sensitive and separated by a comma.
For example, if you type in the prefix ab, the RIP ignores all the arriving files
whose names begin with ab. Examples of files that the Navigator RIP would
ignore for this prefix are abacus.pdf, abandon.ps, and ab123. (The RIP would

204

User Manual

Navigator RIP version 9

8.6 Using the Socket input plugin

not ignore ABALONE.PS, 123ab.pdf, or _absence.) Ignoring means that the
RIP does not process the files and allows the files to remain in the spool
folder until removed by a user or other software.
Note: If you remove or disable a prefix while the spool folder is still active,
the RIP processes any files previously excluded by that prefix but still present
in the spool folder.
You can enter several prefixes. Separate multiple prefixes by commas without surrounding spaces. (If you add spaces after a comma, the RIP treats the
spaces as part of the following string.) Each prefix can include alphanumeric
characters, the underscore character, the period character, and spaces.
For example, this is a valid list of three prefixes: aaab_c,BAC,4.4
Do not process filenames with the following prefixes 

Select this box to make the prefix list active. Leave this box empty to disable
the prefix list without deleting the list of prefixes.

8.6 Using the Socket input plugin
A socket is a hardware-independent method of communicating across a network. The RIP Socket plugin supports TCP/IP on Ethernet for job transfer between any combination of machines running the
UNIX and Windows operating systems. From socket version 2.1r1 the plugin is supported on
Mac OS X.
The RIP Socket plugin also supports a smaller set of features on Power Macintosh computers (but not
680x0 based Macintosh computers). This smaller set of features is supported between any combination of Power Macintosh computers and machines running the UNIX or appropriate Microsoft Windows operating systems.
The benefits of using network sockets are:




Transfer of jobs between different types of machines occurs at network speeds - typically much
higher than those achieved with serial links.
One server machine (the one running the Navigator RIP) can receive input from as many sending machines as can connect to the network. (The RIP must finish one job before starting
another, including jobs from other types of input plugin.)



All sending machines are configured in the same way.



Given an existing network, there is no requirement for extra hardware or shared file systems.



A program or user on the sending machine can be informed of the job status as the job
progresses.

There are some potential, minor, difficulties with socket input:


It requires a small amount of central network management, or user access to configuration
files, on the sending and receiving machines. This management or user access is required only
when setting up the links, not for routine use.

Navigator RIP version 9

User Manual

205

Configuring Input



In general, the socket input plugin accepts only PostScript language and PDF input, sent with a
basic TCP/IP stream protocol. This protocol is simple to generate but prohibits the direct use of
any extra protocol such as that used by the UNIX lp program. (The Xinet PapConnect protocol
is an option if there is no Macintosh computer involved.)

Note: Prior to the release of the Socket plugin v2.1r3, jobs received on an input Socket were named by
the input channel, and not the job. A page feature was provided to overcome this. From the release of
the Socket plugin v2.1r3 the page feature is added to the plugin and thus will use the name within the
job.
Note: Most machines running sockets can support several independent types of communication and
there is usually ongoing communication for processes including mail, printing, and file transfer. The
different types of communications are kept separate by assigning each to a different port, usually identified by number. Port numbers below 1024 are listed in a services database and have registered uses
and protocols that enable computers at local and remote sites to communicate according to published
standards. Some numbers above 1024 also have agreed uses, but most are available for use in a way
specific to a single site, as allocated by the local network manager or system administrator.
Prior to release of the Socket plugin v2.1r3, jobs received on a Socket input were named by the input
channel, and not the job. A page feature was provided to overcome this. From the release of the Socket
plugin v2.1r3 (shipped with Navigator RIP, Eclipse Release), the page feature is incorporated within
the Socket plugin and thus will use the name within the job.

8.6.1 Requirements
All machines need to support TCP/IP over Ethernet and to be linked by a network. This is the only
requirement for machines running the UNIX, Mac OS X, Windows Server 2003, Windows Server
2008, Windows Server 2008 (R2), Windows XP, Windows Vista and Windows 7 operating systems.

8.6.2 Configuration preliminaries
Before attempting to configure a socket you must decide what kind of connection you wish to make
and how to implement it. This subsection describes your options and what you need to know before
configuring the RIP socket input.
In the simplest case, applications on one or more machines send information to the machine running
the RIP and receive no messages about the progress of the jobs.
It is a simple extension to make the standard output from the PostScript language interpreter‚ progress
and other messages as displayed in the RIP Monitor Navigator RIP window‚available to the application sending the job.

8.6.2.1 Server machine
To configure the machine running the RIP, you must know:


206

The port on which the socket plugin is to listen for input.

User Manual

Navigator RIP version 9

8.6 Using the Socket input plugin

Optionally, you may need to know:




A second port, if you wish to return the standard output to the sending application and that
application requires a separate port.
Any protocol in use by the sending application. The options supported by the Navigator RIP
are basic TCP/IP socket stream or Xinet PapConnect.

In general, you can ask your network administrator to allocate a port (or ports) and give you the number(s) or name(s) to enter in the RIP. Using a name rather than a number allows the flexibility of
changing only the services database if it becomes necessary to start using another port.
If you have no network administrator, you may need to look at the services database yourself in order
to find ports that are available for use. In the UNIX operating system, the services database is the file:
/etc/services

Under Windows XP and Windows 2000, the position of the services database can vary between different installations of the operating system. The administrator can choose where to install the operating
system (with the chosen location recorded in the environment variable %Systemroot%) and the services
database is stored in a fixed relationship to this location. For example, if the operating system is
installed in \winnt then the services database is the file:
\winnt\system32\drivers\etc\services

On Macintosh computers, there is no services database. (This means that you must choose ports using
TCP by number on a Macintosh, but you may be able to inspect the services database on a computer of
another type if you are operating on a mixed network.)
Warning: Where used, the services database is an important part of a networked operating system.
Make a copy of the services database file before editing it in any way.

8.6.2.2 Sending machines
To configure the machines sending jobs to the RIP, you must know:


The network address (IP address or hostname) of the machine running the Navigator RIP.



The port on which the machine running the RIP is listening for input.

Optionally, you may need to know:


A second port, used to return the standard output to the sending application. (The RIP can
return this information on the server port: a second port is only needed if the sending application requires a separate port.)

Your network manager should be able to supply these details.
All other settings are dependent on the software used to send the jobs, and must be compatible with
those you have made in the Socket Configuration dialog box. For example, you may need to configure
the sending software to receive the PostScript language status messages.

Navigator RIP version 9

User Manual

207

Configuring Input

We recommend that you configure each sending application to close its sending socket connection at
the end of each job, and pause before reopening it to send another job. The reasons are:




You can configure the RIP to receive input on more than one socket input‚ for example, to
allow the use of different Page Setups. (Each socket must use a different address.) Closing the
connection allows the RIP to check for pending jobs on other input channels.
Certain jobs may require that the server socket is closed before the RIP can start rendering. If
the socket is not closed, rendering starts when the next job starts to arrive, which could result in
a significant delay.

8.6.3 Configuring a Socket input plugin
To configure a new socket input, click New in the Input Controller. The RIP displays the Input Channel
Edit dialog box. Choose a name and Page Setup as normal, then choose SocketInput from the Type popup menu drop-down list. Click the Configure button. The Socket Configuration dialog box appears, as
shown in Figure 8.6.

Figure 8.6 Socket Configuration dialog box

You must make settings for the server (input) socket. The other (output and protocol) settings are
optional but interrelated: you may need to make more than one choice to have a valid combination of
settings.

8.6.3.1 Server socket details
On some the RIP platforms, the Socket type control allows you to choose from TCP by number, TCP by
name, and Local. The only option available on all platforms is TCP by number.
The TCP by number and TCP by name options both offer full network access. The options are equivalent
in that both identify a numbered port. The only difference is that if you give a name, the name is used
to look up the number in the services database, a file which links numbers with names.

208

User Manual

Navigator RIP version 9

8.6 Using the Socket input plugin

A Local socket works only with the UNIX operating system and only on the host machine: that is,
where the sending application and the Navigator RIP both operate on the same machine. It is provided
only for compatibility with older systems.
Server Socket type

Choose TCP by number or TCP by name for use across a network (including
from the host machine), and enter the corresponding port name or number in
the Address box.
Under the UNIX operating system, you can also choose Local but do so only
where absolutely required by the sending application and enter a socket file
name in the Address box.
Address

There are up to three possible entries in this box, depending on the choice
made for Socket type, which itself may be limited by the platforms on which
the RIP and the sending applications operate.
When Socket Type is TCP by number, enter the number of the port.
The socket plugin listens on the chosen port.
When Socket Type is TCP by name, enter the name of the service.
The socket plugin gets the port number by looking up the name in the services database (/etc/services or an equivalent file), and listens on the chosen
port.
When Socket Type is Local, the socket communication is made by using a
socket-style file on the file-system. Enter the file name in the Address field.

8.6.3.2 Bi-directional communications and protocol
These check boxes allow you to specify if and how the Navigator RIP should return information to the
application sending a job.
Bi-directional comms

Select this box when you wish the RIP to pass responses back to the sending
application. The RIP passes these responses: on the server socket when Use
Separate Output Socket is not selected; or on the output socket when Use Separate Output Socket is selected (in which case, you must also configure the Output Socket Details).
Use Separate Output Socket

Select this box to use a separate output socket for responses from the RIP to
the sending application. You must use a separate output socket if the sending
application(s) cannot accept responses on the channel used to send jobs.
This box is irrelevant if Bi-directional comms is not selected.
Note: When this option is selected and a port with the same address is used, a
Duplicate Socket Address: already in use error message will appear and the input
will not start.

Navigator RIP version 9

User Manual

209

Configuring Input

Use Xinet protocol

Do not select this option unless you know that all the sending machines are
using the Xinet PapConnect protocol. In particular, Classic Macintosh computers cannot use PapConnect. Also, we recommend that you use this option
only for downloading fonts; for general use, leaving this box unselected gives
faster transfer rates.

8.6.3.3 Output socket details
These details are only relevant when you have selected the Use Separate Output Socket box and the Bidirectional comms box.
Choose these values in the same way as for the server socket, described in Server socket details on
page 208. You must choose a different Address from the one chosen for the Server socket. It is convenient but not essential to use the same socket type to make it obvious whether or not the addresses are
different. For example, choose numbered addresses that differ by 1.
Note: The sending application can continue to listen on the RIP output socket after it has closed its
sending socket. (Sending machines on page 207 explained why it is advisable to close the sending
socket‚ the one connected to the RIP Server socket.)

8.7 Using the Asynchronous Socket plugin
The asynchronous socket input is not for use as a source of routine jobs. It is a special case of the
socket plugin, designed to run jobs immediately - regardless of what the RIP is already doing. This
input provides a way of controlling and monitoring the RIP without using menus and dialog boxes.
These jobs are restricted in what they can do if jobs from other inputs are to have the intended result.
To prevent unintended interaction with a running job, each job submitted to the asynchronous socket
input should start by performing a save and end with a restore. Also, the job should not use any painting operators or otherwise alter the graphics state.
Permissible tasks‚ those that do not interfere with other jobs at the interpretation stage‚include querying the availability of fonts and manipulating page buffers in the throughput system.
The one exception where interference with another job is allowed, and necessary, is that it is possible
to kill the currently running job.

8.7.1 Creating an asynchronous socket input
It is possible to create an asynchronous socket input in the Input Controller, and subsequently edit or
delete it.
Note: The expected way of creating an asynchronous socket input is by including PostScript language
statements in the files that the RIP executes when starting up. An asynchronous socket input created
this way is likely to be a protected channel, optionally viewable in the Input Controller but not editable.
To create and configure an asynchronous socket input:
1. Click New in the Input Controller. The RIP displays the Input Channel Edit dialog box.

210

User Manual

Navigator RIP version 9

8.8

Using the Asynchronous Socket Quit plugin

2. Choose SocketInputAsync from the Type drop-down list. Give the input a suitable name and
select a Page Setup. Select the Enabled box.
3. Click the Configure button. The Socket Configuration dialog box appears. Make the settings you
wish, and click OK. (See Configuring a Socket input plugin on page 208 for details.)
4. Click OK again to close the Input Channel Edit dialog box. The asynchronous socket input
becomes active, as you click OK or when you next start inputs.
All other aspects of its use and configuration are as described in Using the Socket input plugin on page
205.

8.7.2 Sample job
This example shows how a short PostScript language job can kill the current job.
% This code kills the currently running job.
//errordict /interrupt get exec

8.8 Using the Asynchronous Socket Quit plugin
The SocketInputQuit type is a special case of the asynchronous socket input, with the single purpose of
causing the RIP to quit. Connecting to a socket of this type makes the RIP quit without the need to
send a PostScript language job containing the appropriate commands.
To create an input of this type, follow the procedure for the asynchronous socket, described in Creating an asynchronous socket input on page 210, but choose SocketInputQuit in the Type drop-down list.
You can select any Page Setup for use with this input. There is no need to specify a return channel.

8.9 Using the Serial input plugin
The Serial Line input plugin handles PostScript language jobs passed to it over a serial line (RS232 or
V24 standards). The benefits of offering serial line input are:




The Navigator RIP can become an immediate replacement for a PostScript compatible printer
that was used exclusively over a serial line.
Remote computers can submit jobs to the RIP through a serial line without being part of the
same network as the computer running the RIP.

The use of a RIP input using a spool folder or network protocol is preferable in almost all cases. The
advantages of these methods are greater speed and robustness than using a serial line.

8.9.1 Overview
This is a brief introduction to creating and using a serial input to the Navigator RIP. There is more
detail in later sections.
The first stage of using a serial input to the Navigator RIP is to find available serial ports on the
remote computer and on the computer running the RIP and to establish a reliable serial link between
them. This requires a null modem cable with suitable connectors for the ports: Establishing a serial

Navigator RIP version 9

User Manual

211

Configuring Input

link on page 212 specifies the cable more fully and suggests how you or your supplier may need to test
the link.
Next you must configure the RIP input. To configure a Serial input, choose the source in the Input
Controller and click the Configure button. The Serial Comms Configuration dialog box appears, containing several controls, described in Section 8.9.3, Configuring a Serial input plugin.
Set the controls to the desired values and click OK, then enable the input in the Input Controller dialog
box and again click OK. When you select Start Inputs from the Navigator RIP menu (or immediately if
inputs are already started), a message appears in the Navigator RIP window of the general form:
Publishing Serial Input printer 

Finally, the remote computer must send a job. When the input is receiving data from the remote computer, an alert box appears on the screen of the computer running the RIP to show that the plugin is
reading data. (There is no progress box because the plugin cannot find out the total size of the job until
it has read all of it.)

8.9.2 Establishing a serial link
Note: This section is necessarily technical.
The null modem cable must connect the lines for send data, receive data, and signal ground (earth).
Depending on the handshaking method, the cable may also need to connect control lines.
If you wish to use hardware handshaking, the cable must also have the RTS and CTS control lines
connected. Software handshaking does not require these control lines because it uses the XON and
XOFF characters, sent over the data lines. For both forms of handshaking, this is a minimum requirement: the program on the remote computer may require other control line connections or links
between pins, even if you are using software handshaking. (If the remote computer and program
require extra control signals, it may help to know that the RIP controls the DTR line and ignores the
DSR line.)
For testing, you have two options:



Use a communications or terminal emulation program on both computers.
Use a communications or terminal emulation program on the remote computer and the RIP on
the local computer. (You must configure a Navigator RIP serial input first.) Send a carriage
return character to the RIP to make the RIP react as if it is receiving a job: if the link is good,
the RIP loads a Page Setup and displays a message in the Navigator RIP window. (Like most
PostScript language compatible interpreters, the RIP does not by default echo characters to the
remote computer.)

There are many commercially available communications programs but the Terminal program supplied
with Microsoft Windows, and the tip program supplied with the UNIX operating system are adequate.
You can start testing by typing short messages (PostScript language jobs if you are sending to the RIP
input plugin). Do not consider the link fully tested until it can transfer files of about 10 KB without
any corruption. Find the highest speed at which the link works reliably.

212

User Manual

Navigator RIP version 9

8.9 Using the Serial input plugin

8.9.3 Configuring a Serial input plugin
To create and configure a new serial source:
1. Click New in the Input Controller. The RIP displays the Input Channel Edit dialog box.
2. Choose Serial Input from the Type drop-down list. Give the input a suitable name and select a
Page Setup. Select the Enabled box.
3. Click the Configure button. The Serial Comms Configuration dialog box appears, as shown in
Figure 8.7. Make the settings you wish, and click OK.
4. Click OK again to close the Input Channel Edit dialog box. The serial input becomes active,
now or when you next start inputs.

Figure 8.7 Serial Comms Configuration dialog box

Most controls in the Serial Comms Configuration dialog box set shared communications parameters,
which must match those in use by the sending computer and application. Alter these communications
settings only if you understand their meaning and you can ensure that the remote computer is reconfigured to use the same settings.
The remaining items also affect communication but are specific to the computer running the Navigator
RIP and are fully described here.
Device Name

Set this to be the serial port on the computer running the RIP to which the
remote computer is connected.
The entries in the list include COM1 and COM2.

Baud rate

A shared communication setting‚ set it to match the setting on the remote
computer.

Parity

A shared communication setting‚set it to match the setting on the remote
computer.

Navigator RIP version 9

User Manual

213

Configuring Input

Character Bits

A shared communication setting‚ set it to match the setting on the remote
computer.

Stop bits

A shared communication setting‚ set it to match the setting on the remote
computer.

Mode

There are three possible choices: ASCII, Adobe binary, and Binary. Choose
Binary unless you know that the sending application requires a different
mode.
See ASCII and binary modes on page 215 for more details on the different
modes.

Output local

This setting controls the destination of error messages and status information
about jobs. Select Output Local to have the normal RIP behavior where these
messages display only in the Navigator RIP window: the normal behavior of
the RIP for other inputs.

Output remote

This setting controls the destination of error messages and status information
about jobs. Select Output Remote to send information down the serial line to
the remote computer.

Job Output

This setting controls the destination of error messages and status information
about jobs.
Select Remote to send information down the serial line to the remote computer.
Select Local to have the normal RIP behavior where these messages display
only in the Navigator RIP window: the normal behavior of the RIP for other
inputs.

Handshake

This is a shared communications setting which limits the possibility of the
remote computer sending data too fast for the plugin to handle correctly. The
setting on the computer running the RIP must match the one in use on the
sending computer. (Software handshake uses the XON/XOFF characters and
Hardware handshake uses the CTS/RTS control pins.)
Select only one handshake method.

Link Timeout

This setting has an effect only when the plugin is using binary mode. The
value is the time in seconds that the input plugin waits without receiving new
data before considering that the job has finished. The RIP accepts values in
the range 1 through 1000.
Set the value to be larger than any pauses you expect in the data from one job,
but small enough to have the RIP recognize the end of job in a reasonable
time. The remote application must wait for this time between sending the end
of one job and starting to send the next job, so an overlong value reduces
throughput.

214

User Manual

Navigator RIP version 9

8.9 Using the Serial input plugin

In particular, you may want to set a large value (100 seconds or more) if you
are testing a link by typing PostScript language statements through a terminal
emulator program: in this case, the value must be larger than any pause in
your typing.

8.9.4 ASCII and binary modes
The input plugin can treat data arriving from the serial line in one of several ways. You choose which
way the plugin uses by selecting one of the following modes:


Binary.



ASCII.



Adobe binary.

We recommend that you select Binary, unless there is a strong need to use one of the other modes.
ASCII and Adobe binary are very similar modes, where the input plugin treats some characters specially. The application sending the data must send one of these special characters to signal the end of
the job and can send other characters to control and monitor the job in progress. The end of this section lists the special characters (for example: ^C).
In detail, the modes are:
Binary

The RIP passes all data to the core RIP and detects the end of job by observing that no data has arrived within a timeout period. (The remote application
must use at least the same timeout period between sending jobs.)

ASCII

All data is passed to the core RIP for processing, except for special characters. The special characters are ^C, ^D, and ^T. ASCII mode resembles
Adobe binary mode with the exception of not supporting ^A.

Adobe binary

All data is passed to the core RIP with the exception of special (control) characters defined by the Adobe binary communications protocol (BCP).
The special characters are all control characters: characters which you can send from within a terminal
emulator program by holding down the Control key while typing a normal character key. For example,
you can type Control-T (shown as ^T) by holding down the Control key while typing the letter T.
The characters most likely to be useful in testing are those supported by ASCII mode.
Character
^A

Meaning
Treat the following character so that it passes to the core RIP as a control character which would otherwise have been stopped and taken as a
control.
^A is not supported in ASCII mode.

Table 8.1 Special characters in ASCII and Adobe-binary modes

Navigator RIP version 9

User Manual

215

Configuring Input

Character

Meaning

^C

Generate an interrupt. This terminates the job immediately, with an
error.

^D

Signal a normal end of job.

^T

Request a job status. The job status is returned down the serial line as a
message enclosed in square brackets. For example, this might be one
such message:
%%[job: Test-job; status: Waiting]%%
Table 8.1 Special characters in ASCII and Adobe-binary modes

8.10 Using more than one method
The RIP can use any combination of the above input types and listen on all active inputs. When several inputs want to send data, only one job can reach the RIP at a time but the other inputs may be able
to receive and buffer data for later rendering.
To accept input from several sources, create and enable the sources you want in the Input Controller.
The RIP automatically monitors all enabled sources as soon as the input system is started with the
Start Inputs menu option.

8.11 Using the Print File command
When you select Print File from the Navigator RIP menu, the dialog box shown in Figure 8.8 appears.

Figure 8.8 Print File dialog box

Choose an appropriate Page Setup for printing the files, from the Page Setup drop-down list.
Note: If you do not choose a Page Setup, the RIP uses the one that you chose last time you printed a
file. If you have not printed a file in this RIP session, the first Page Setup in the drop-down list is used.
To change the order of this listing, see Reordering Page Setups on page 77.
The Print File dialog box shows all PostScript language files in the current folder. (To show files of a
different type, or all files, use the Files of type drop-down list.)

216

User Manual

Navigator RIP version 9

8.12

Printing PostScript language files

If you want to choose a file that is not in the folder shown, use the dialog box to move to the correct
folder.
Use the Look in drop-down list to use other folders or drives.
Note: To select all files in the list, click anywhere in the central list of files and type Ctrl+A.
While any file is being processed, an additional Print File menu appears on the menu bar of the main
RIP window.


Alt


You can abort the current job by choosing Kill Current Job from this menu, or by typing Alt+‚” . “(a
period character).
When Kill Current Job is selected, the current job is stopped but subsequent jobs will be processed.
By selecting Stop Printing File, the current file will complete but any jobs queued after the current job
will not print.
Selecting Abort Printing File will stop the current job and also stop all subsequently queued jobs from
ripping.

8.11.1 Printing several files
To print out several files at once, just select more than one file from the Print File dialog box before
clicking Print. The following keys make this possible:


Shift


You can select a contiguous block of files by selecting the first file in the block, then selecting the last
file in the block while holding down the Shift key.


Ctrl


You can select several non-contiguous file names by holding down the Control key while making your
selection.
Note: The list of files to print can include files other than PostScript language, PDF files, TIFF 6.0,
and TIFF/IT-P1. The RIP ignores types of files that it cannot print.

8.12 Printing PostScript language files
The RIP can print PostScript language files and Encapsulated PostScript (EPS) files using the Print
File command or managed inputs. You can also enter PostScript language code interactively using the
Navigator RIP > Executive command.
You can submit PostScript language jobs to the RIP using any of the managed input methods: AppleTalk (if supported), NT Pipe, Spool Folder, sockets, and serial input.
The Page Setup Options dialog box provides several options that tailor the way the RIP processes
jobs. Some options provide compatibility with jobs using PostScript LanguageLevel 2 or
LanguageLevel 1, or produced by specific applications. Other options deal with more general fault

Navigator RIP version 9

User Manual

217

Configuring Input

conditions or are convenience features. For example, some PostScript language file formats, such as
EPS, do not always include a showpage operator at the end of jobs. One of these options adds showpage
to the end of a job, if necessary. See Edit Page Setup dialog box on page 77 for details.
When ColorPro is enabled, the RIP can detect and utilize an ICC profile embedded in an Encapsulated
PostScript file. See the ColorPro User Guide for details.

8.13 Printing PDF files
The RIP can print Portable Document Format (PDF) files that conform to the PDF 1.7 specification or
earlier, or PDF/X versions listed below. The PDF Options dialog box allows you to set up strict or
flexible workflows using these versions of PDF jobs.
Navigator 9 supports the following PDF/X versions:


PDF/X-1a:2001



PDF/X-1a:2003



PDF/X-3:2002



PDF/X-3:2003



PDF/X-4



PDF/X-4p



PDF/X-5g



PDF/X-5pg

These are the only versions supported; any previous support for earlier versions has been dropped.
The PDF Options from the page set up manager allows the user to select from a range of PDF/X verification settings, see PDF Types on page 227
The aim is to reproduce with high quality all the features of PDF files that can be rendered on paper or
film. You can also preview pages printed from PDF files, but the RIP does not provide a fully interactive hypertext viewer or editor: there are no search, cross-reference, or annotation facilities.
Note: PDF/X is a standard defining a subset of PDF, designed for trouble-free use where the creator
sends the PDF file to an external printer or other prepress consumer.
Note: A PDF/X-3 file containing an OutputIntents dictionary will be color managed using the ICC profile indicated by the OutputIntents dictionary as long as the job uses a device independent color space
and the Override color management in job option is not selected. For more information see PDF/X Color
management on page 219.

8.13.1 PDF/X standards
With the growth in the use of PDF for transferring graphic arts content files between sites and between
companies it is clear that the flexibility of the PDF format does not allow robust and predictable
exchanges of prepress data.

218

User Manual

Navigator RIP version 9

8.13

Printing PDF files

To overcome this problem a family of standards has been developed to define restrictions on the content and use of PDF files to make PDF output more predictable.These standards are collectively called
PDF/X, each with a suffix to differentiate the specifications defined for different sets of market needs.
The PDF/X standards defines the elements that must be included in a PDF, and those that must not.
PDF/X-1a:2001 is designed to provide the most robust and, to some extent, least flexible delivery of
PDF content data. It requires that the color of all objects be expressed in CMYK or spot colors, prepared for the intended printing conditions. Elements in RGB or Lab color spaces or tagged with ICC
profiles are prohibited. It also requires that all fonts used in the job be embedded in the supplied PDF
file.
PDF/X-3:2002 allows slightly more flexibility in that color managed workflows are also supported‚
elements in Lab, and with attached ICC source profiles may also be used.
PDF/X-4:2008 supports color-managed, CMYK, gray, RGB or spot color data, as well as optional
content and PDF transparency.
PDF/X-4p can be used with an externally supplied ICC Profile for the output intent.
PDF/X-5g is an extension of PDF/X-4 that allows the use of workflows similar to those used with
OPI. That is, the ability to reference externally supplied files.
PDF/X-5pg is an extension of PDF/X-4p that allows the use of workflows similar to those used with
OPI, together with a reference to an external supplied ICC Profile for the output intent.
Support for PDF/X-4p, PDF/X-5g, PDF/X-5pg requires the ability for the RIP to find external files
(ICC color profiles for PDF/X-4p and PDF/X-5pg and reference XObjects for PDF/X-5g and PDF/X5pg).
Support for PDF/X-4, PDF/X-4p, PDF/X-5g and PDF/X-5pg allows a digital front end to be constructed which is compliant with PDF/VT-1, PDF/VT-2 and PDF/VT-2s.
The specifications also set out how a PDF/X file should be processed by the receiver of the file. If different approaches to overprinting, for instance, are taken at different sites then it will not be possible
to predict the exact appearance of the final printed piece from a pre-transmission proof.
This section describes how a Navigator RIP should be configured in order to produce PDF/X compliant output.

8.13.1.1 PDF/X Color management
PDF/X files all include data describing the characterized printing conditions for which the job was
prepared. That data is collectively described as the output intent. It includes an identifier that may
refer to a characterization held in a registry maintained by the ICC (International Color Consortium).
In many cases the output intent will also include an embedded profile to support accurate color proofing, both on screen and on hard copy.
The ColorPro option can be used to perform in-RIP color management with the Navigator RIP. It can
be used for many purposes, including color proofing, or for adjusting plates to enable a press to better
match a characterized printing condition such as SWOP. For more information see the ColorPro documentation.

Navigator RIP version 9

User Manual

219

Configuring Input

With regard to the output of PDF/X files, the Navigator RIP output will match the Altona test suite
and the GWG test suite output when auto-detecting PDF/X files.
You can adjust the behavior of the RIP to match other mainstream applications by turning off the autodetection of PDF/X and adjusting the RIP overprint settings. See PDF Types on page 227.

8.13.1.2 Trapping
The TrapPro options add in-RIP trapping functionality to the Navigator RIP. If these have been
enabled, trapping parameters may be defined in the user interface and automatically applied to all jobs
submitted to the RIP. If a PDF or PDF/X file is labeled as having already been trapped (by setting the
Trapped flag to True), the in-RIP trapping will automatically be disabled while processing that file to
prevent traps being applied twice.
For more information see the TrapPro documentation.

8.13.1.3 Workflow notes
When processing PDF/X files it is important that your whole prepress workflow provides a result that
complies with the standard, including placement of partial-page submissions on a page and so on. You
should also test all routes by which an incoming file may pass through your complete workflow. Tools
such as the Kensington Suite and the Global Graphics PDF/X Overprint test strip can assist in this
testing. see the Global Graphics web site for more information.

8.13.2 Printing PDF version 1.4
One of the major features of this revision is the ability to mark objects as being partially transparent,
so that other objects in the background are visible through them. This feature aids the creation of many
special effects, including drop shadows, ghosting back of image areas behind text blocks and soft
edges to silhouetted pictures.

8.13.3 Printing PDF version 1.5
Navigator 7.0 and later will print PDF v1.5 files. Some of the features included are:


ICC profile handling.



Support for JPEG 2000 and ability to decompress JPEG 2000 images



16 bit images.



Annotation types.
New line end styles for Line annotations, fine positioning of Square and Circle annotations, new
annotation types ‚ Polygon & Polyline, Caret annotations.



220

Cross reference tables.

User Manual

Navigator RIP version 9

8.13



Printing PDF files

Layers.
Used for versioning as layers, for example, a packaging workflow. Each group of optional content may be flagged with separate settings to display on-screen in a PDF reader and to print. The
provision of layers within PDF 1.5 allows the support for different languages within a single
file.

8.13.4 Printing PDF version 1.6
Navigator v7.1 will print PDF v1.6 files. Some of the features included are:


Encryption enhancements.



Specification of the size of the unit in default user space.



Support for NChannel color spaces.



More flexible and locking of optional content groups.
Optional content is supported in the Navigator RIP. However, optional content in nested PDF
documents is not supported.



New facilities for embedding OpenType fonts in PDF files.
The Navigator RIP supports embedded OpenType fonts, with either TrueType or PostScript language glyphs.








Grouping of markup annotations.
The specification of objects, such as watermarks, that stay at a constant size regardless of the
page size.
The ability to accurately specify relationships between the dimensions of objects on a page and
their real-world counterparts.
PDF files can now display three-dimensional graphical data, using the U3D format, in a PDF
file.
Documents containing U3D Artwork annotations will be processed to completion by the Navigator RIP. However, the resulting output will only display the 2D static representation that is
supposed to accompany the 3D graphic. If the 2D graphic is missing, that part of the document
will be blank.

Note: The Navigator RIP does not support some types of JPEG 2000 files where a soft mask channel
is included in the image. A job of this type will fail.

8.13.5 Printing PDF version 1.7
The Navigator RIP v8.0 Release and later will print PDF v1.7 files. Some of the features included are:


Unicode string support.

Since the publication of the PDF v1.7 specification a number of extensions have been developed to
support various new features including those in Acrobat 9 and 9.1. These extensions are published as
Adobe Supplement to the ISO 32000, BaseVersion: 1.7. Navigator RIP v8.2 and later supports
ExtensionLevel: 3.

Navigator RIP version 9

User Manual

221

Configuring Input

8.13.5.1 PDF Check Warning
With PDF Check Warning enabled the following message appears at the start of every PDF job using
transparency:
%%[ WARNING - THIS JOB USES PDF TRANSPARENCY ]%%

This message indicates that the PDF 1.4 transparency checker procset has identified an element
marked as transparency in the job. The procset then switches the RIP from Normal mode into Backdrop Rendering mode.
Normal mode means the RIP functions normally, and you should not notice any significant changes in
behavior in terms of performance, memory usage and so on.
In Backdrop Rendering mode there are significant changes. Interpretation time will be broadly similar
as in normal mode however rendering time will be increased. This is because the RIP does the compositing in the render phase and this process is computationally intensive. The compositing phase currently requires memory to be allocated and so vmerrors may occur. In terms of results, the objects are
composited at full device resolution, there is no downsampling like that produced by pre-flatteners.
Areas of the page which have only opaque objects are optimized to render faster and thus performance
depends on how much of the page is covered by objects which are transparent.

8.13.5.2 PDF Check Abort
With the PDF Check Abort switch enabled all jobs using transparency will be aborted and the following message is displayed:
%%[ WARNING - THIS JOB USES PDF TRANSPARENCY - ABORTING JOB ]%%

8.13.5.3 PDF Page Alert
With the PDF Page Alert switch enabled the following alert appears when interpreting every page that
uses transparency.
%%[ THIS PAGE USES PDF TRANSPARENCY ]%%

Using the page-by-page check allows the RIP to switch between Normal and Backdrop Rendering
mode on a page by page basis. This improves performance because backdrop rendering a page containing no transparency is much slower than normal rendering.
Note: When a PDF file references another PDF file via transparency the second PDF is now checked
while determining if the page containing the reference has any transparent object on it.
Also, not all applications that provide a user interface to define transparency do so using PDF structures. Macromedia FreeHand has support for transparency, but it is done in a different way. Also
Acrobat Distiller cannot make transparent objects.
¬Æ

8.13.6 AcroForms
A PDF file can contain information which is additional to the standard PDF format. When viewed
using an interactive application such as Adobe Acrobat, this additional information provides interactive features making the page more like a form. These files are called AcroForms.

222

User Manual

Navigator RIP version 9

8.13

Printing PDF files

With features such as text input fields, multiple choice option lists and clickable buttons, a PDF file
that features an AcroForm is used to provide comprehensive electronic form filling functionality.
You interact with the form via the usual mouse and keyboard actions. The AcroForm can be programmed to respond to events (such as clicking on a button) to provide various levels of automation.

8.13.6.1 Print Ready PDF AcroForm files
An AcroForm is generally created for interactive use via an interactive program like Adobe Acrobat.
However, you may want to print these files. The Navigator RIP is, of course, not interactive and is
only concerned with rendering the contents of the PDF file for printed output. This creates a number
of issues about exactly which of the essentially interactive features (such as, buttons and lists) should
be printed and how they should appear.
When the form is completed (that is, all the required text input fields are filled in) using Adobe Acrobat, the PDF file is re-saved by Acrobat to save the entered information. When this is done, Acrobat
creates additional content in the PDF file called Appearance Streams which render the filled-in text
input fields. It also marks the PDF file AcroForm as being complete (by setting the NeedAppearances
key in the AcroForm dictionary to false).
We refer to a file that has been completed in this way as being print-ready.
Prior to being made print ready, a PDF AcroForm may be incomplete to various degrees. For example,
the form could be blank in the sense that none of the fields contain any user-entered information.
Alternatively, a PDF AcroForm file could have been partially completed by a database program (for
example) which can provide values (content) for some or all of the text input fields but still not yet
completing the file. This completeness refers to two things:




The fields appearance streams may not be present in the PDF file, even though the fields may
have been given values (that is, the actual text to display in the input fields).
The AcroForm will be marked as incomplete by virtue of the NeedAppearances key in the AcroForm dictionary being set to true.

When the Navigator RIP is given the job of printing a PDF AcroForm, it has to be sensitive to whether
or not the form has been completed and is print-ready.
The Navigator RIP uses the following rule:


If the NeedAppearances key in the AcroForm dictionary (in the PDF file) is false (or is absent),
the AcroForm will be printed such that all fields (and only those fields) with appearance
streams given will be displayed. Otherwise, if NeedAppearances is true, the Navigator RIP will
reconstruct appearance streams for all the fields it finds.

What this means for the Navigator RIP is that, unless the PDF file has been made complete and printready, the final appearance of the various fields of the AcroForm could be displayed slightly differently than they might appear in the viewing application (for example, Acrobat).

Navigator RIP version 9

User Manual

223

Configuring Input

8.13.6.2 PDF AcroForms and the Navigator RIP
When a PDF AcroForm has been completed and saved and is therefore print-ready, the Navigator RIP
will print all AcroForm field types (text fields, choice list boxes, buttons, and signature fields). However, this is conditional upon the manner in which the fields have been defined in the AcroForm. For
example, some button fields may have been flagged (by Acrobat) as not to be printed. In this case the
Navigator RIP will not print such items.
If the PDF AcroForm has not been saved as print-ready, the Navigator RIP still supports the rendering
of text input fields (both single-line and multi-line).To do this, the RIP constructs (or reconstructs) the
fields appearance streams according to the field values and other information contained within the
AcroForm. It should be noted however that there is a degree of licence with respect to how a viewing
application may format the items (such as text and buttons), and so results between different viewing
applications may differ.
If the AcroForm is not print-ready, the Navigator RIP also attempts to support other field types (such
as buttons and choice lists) but their final appearance may be different to the intended result (by a
greater or lesser extent). It is therefore highly recommended that all AcroForm files to be submitted to
the Navigator RIP are saved as print-ready first.

8.13.6.3 Implementation of PDF 1.4 Annotations
Support for PDF Annotations, as defined in the PDF 1.4 specification, is implemented in the Navigator RIP. Annotations are defined in section 8.4 of the specification, however, they also refer to AcroForm fields (which merge with annotation widgets). AcroForms are defined in section 8.6 of the
specification entitled Interactive Forms.
Support for AcroForms has already been implemented for PDF 1.3.
Most PDF Annotation types are supported as long as they meet the following conditions:


their Normal appearance streams are present and correct in the PDF file and,



they have their Print flag set.

Excluded annotations are:






Link and Movie annotations, because they do not present a normal appearance stream in the
standard way
Popup annotations, because they only apply to interactive applications (that is, popping up a
window)
TrapNet (also known as, trap network) annotations.

Note: From Eclipse Release SP3 the RIP ignores (in non-strict mode only), PDF documents with
FreeText type annotations which contain invalid PDF content.

224

User Manual

Navigator RIP version 9

8.13

Printing PDF files

8.13.7 Related documentation
The following documents may help you understand AcroForms:


Graphic technology Prepress digital data exchange‚ Use of PDF for composite data‚Part 1:
Complete exchange (PDF/X-1), American National Standard CGATS.12/1-1999. This document is available from NPES; see http://www.npes.org/ for purchasing details.



Portable Document Format Reference Manual, Version 1.4. Adobe Inc.



ColorPro User Guide, Global Graphics Software.

8.13.8 PDF Options dialog box
Figure 8.9 shows the dialog box that appears when you click PDF Options in the Edit Page Setup dialog box. (This view shows some settings that are not at their default values.)
If you need to print PDF files with different options, for example with different passwords, you can
create a number of PDF Page Setup configurations..

Figure 8.9 PDF Options dialog box

The options are in sections for page selection, PDF type acceptance and passwords.

8.13.8.1 Page selection
Print all pages

Leave this check box selected to print all the pages in the PDF document. If you wish to print
only a subset of the pages from a PDF job, deselect this check box and enter the desired pages in
the Pages field.
Reselect this check box when you have finished printing the subset of pages. This enables the
printing of all pages from other PDF jobs. (You do not need to delete the entry in the Pages
field.)

Navigator RIP version 9

User Manual

225

Configuring Input

Page(s)

Enter numbers for the page or pages that you wish to print. You can enter individual page numbers or ranges, separating each number or range with a comma ( , ) character.
To enter a page range, enter the numbers of the first and last pages in the range, using a hyphen
to separate them: for example, 7-16. If you wish to print all pages from a particular page to the
end of the job, enter a range starting with that particular page and ending with a number that you
know to be higher than the last page in the PDF job: for example, 47-10000.
You can combine individual page numbers and ranges: for example, 1,2,7-16,23,24.
Pages may be repeated, for example [ 27, 27, 27] will print three copies of page 27.
Pages may be listed out of sequence, for example [154, 27, 170].
If not all pages in the document are printed the RIP will display a warning similar to the following:
%%[Warning: Page range restricts printing to the following page(s):5, 27, 156-163, 210, 210, 120, 196 from an
availalable N pages.]

where N is the number of pages in the document.
If the range is such that no page in the job fits the following warning is displayed:
%%[ Warning: No pages found within range]%%

When printing a PDF job, the RIP displays a message for each page that is not printed because
of being unlisted in this field.
Page size bounding box

PDF version 1.3 offers several options for defining a rectangular area that is the area of interest
for a PDF page. A PDF file may set values for one or more of these areas, to be used as appropriate to the different ways that the PDF file can be used: viewing, office printing, imposition,
commercial printing, and so on.
The RIP looks for the values of the option chosen in this list and makes a page buffer of the size
set by that option. Only MediaBox must be present in a file, but the other areas inherit default
values from MediaBox.
When using Simple imposition the option chosen in this list is used to calculate the position of
trim marks and page furniture. Any bleed specified within Simple imposition will be filled with
objects outside that trim box, and the Page buffer will normally be larger than the chosen PDF
Page size bounding box. For more information see Configuring Simple imposition on page 261.
The options in this list are fully defined in the Portable Document Format Reference Manual,
Version 1.3. The default is MediaBox.

226

MediaBox

The size of the media, which may be larger than the page imaged upon it.

BleedBox

The size of the page whose edges must be reached by bleed objects, though
the trimmed size of the page may be smaller. There may be printer marks and
parts of the bleed objects outside this area.

User Manual

Navigator RIP version 9

8.13

Printing PDF files

TrimBox

The size of the page as intended for delivery to the reader, after trimming any
printer marks and excess bleed areas.

ArtBox

The size of the rectangle to be used when placing a PDF graphic. (Typically,
this is the bounding box of the graphics plus a possible allowance for captions or blank margins.)

CropBox

Rectangle specifying the default clipping region for the page when displayed
or printed. Acrobat Exchange sets this when cropping a page.

8.13.8.2 PDF Types
By default all PDF files will be accepted by the RIP, whether they conform to the PDF/X standards or
not.
The RIP will recognize PDF/X-1a, PDF/X-3, PDF/X-4, PDF/X-4p, PDF/X-5g and PDF/X-5pg files,
apply the necessary additional checks to validate that they comply with the full details of the standard,
and automatically change any configuration settings (such as overprinting) that do not match the
requirements for rendering them correctly.
Accept type(s)

This list allows you to define how strictly the PDF file must conform to various standards and
specifications for PDF jobs. You can use the On error list to define what the RIP should do if the
job does not meet the requested specification.
The options in this list are as follows:
Auto-detect types

This is the default option. The RIP makes the best possible attempt to print
the file according to the type labeling within the job. PDF/X files will be recognized automatically. If the job claims to be PDF/X-1 but does not meet that
standard, the RIP treats that as an error but may still be able to print the file.
With regard to the output of PDF/X files, the Navigator RIP output will
match the Altona test suite and the GWG test suite output when auto-detecting PDF/X files.
You can adjust the behavior of the RIP to match other mainstream applications by turning off the auto-detection of PDF/X and adjusting the RIP overprint settings. See Color managed overprints for DCS on page 361.
Any PDF <= 1.7 as basic PDF 

All PDF and PDF/X files will be accepted, with no special treatment of
PDF/X files. With this setting the RIP will print any job with a recognized
PDF version; that is, version 1.7 or less, including non-compliant jobs
labeled as PDF/X-1, but not actually complying with the standard. This is the
most relaxed setting. By using this option you are explicitly telling the RIP
not to override any overprint settings for a PDF/X file.

Navigator RIP version 9

User Manual

227

Configuring Input

Any PDF/X-1a

Only PDF/X-1a:2001 and PDF/X-1a:2003 files will be accepted. See below
for the action taken when other files are received.
Any PDF/X-3 or 1a

Accept any supported PDF/X variant, that is; PDF/X-1a:2001, PDF/X1a:2003, PDF/X-3:2002, and PDF/X-3:2003.
PDF/X-4, 3 or 1a

Accept any supported PDF/X-3 and X-1a variant, that is; PDF/X-1a:2001,
PDF/X-1a:2003, PDF/X-3:2002, and PDF/X-3:2003, and only PDF/X-4 (that
is, not PDF/X-4p).
PDF/X-4p, 4, 3 or 1a

Accept any supported PDF/X-3, X-1a and X-4 variant, that is; PDF/X1a:2001, PDF/X-1a:2003, PDF/X-3:2002, PDF/X-3:2003, PDF/X-4 and
PDF/X-4p.
PDF/X-5g, 5gp 4p, 4, 3 or 1a

Accept any supported PDF/X-3, X-1a and X-4 variant, that is; PDF/X1a:2001, PDF/X-1a:2003, PDF/X-3:2002, PDF/X-3:2003, PDF/X-4 and
PDF/X-4p. In addition, PDF/X-5g and X-5gp are accepted (not PDF/X-5n).
On error

The options in this list define the action you wish to occur if there is an error: for example, if the
PDF file is an unrecognized type or if it fails to meet the condition set in the Accept type(s) list.
The actions are as follows:
Report errors and continue

The errors reported are for the file type as explicitly set in the Accept type(s)
field or as detected when the setting is Auto-detect types. There may be problems with the printed results if the job is newer than version 1.5 or badly
constructed.
Any PDF/X validation errors will be reported in the RIPs system log, but the
file will still be processed and output.
Abort job

Report errors and reject (abort) the job. If a file being processed does not conform to the file type selected, the job will be aborted, and no output will be
produced.
Where a condition in the PDF file is encountered which does not conform to the appropriate PDF/X
specification, a warning message is displayed.

228

User Manual

Navigator RIP version 9

8.13

Printing PDF files

8.13.8.3 Non-conforming rendering
To force the RIP to apply your own configuration (for example, overprint settings), to a PDF/X file;
select Any PDF <= 1.4 as basic PDF in the Accept type(s) menu. This option may also be used to print a
file that claims to be PDF/X compliant, but that does not correctly conform to the standard.

8.13.8.4 Password
Use password to print protected documents

Select this option when you wish to print a document that has been protected by a password, and
enter that password in the text field. Enter one password only.
For maximum security, remove the password after use. This removal is optional if your other
PDF jobs do not have password protection.
Note: The PDF specification allows for files to have Owner and User (reader) passwords. The
RIP checks the password that you enter against both of these passwords, and allows printing if
either password produces a match.
Passwords can be any length but only the first 32 characters are significant. If you have any way
to influence the choice of password used in jobs supplied to you, suggest that it uses only ASCII
characters: the letters A-z and A-Z, the numerals 0-9, and punctuation marks such as []{} and ;.
For example, there may be problems in entering the password if the password uses characters
that are not in the English alphabet. Avoid multiple white space characters, accented characters,
and characters that require a double-byte representation.
Note: The Honor PDF Color Management check box has been removed. The option is now called
Override color management in job and is part of the Input Document Controls within the Color
Setup Manager. See Color Setup on page 354 for more details.
To make fullest use of jobs containing device-independent color definitions, enable a TrapPro
option in the Configure RIP Extras dialog box.

8.13.9 Usage
The simplest way to use PDF files is using the Navigator RIP > Print File command. To see a listing of
PDF files in the current folder, use the PDF Files or All Files option in the Files of type drop-down list of
the Print File dialog box. Select the Page Setup that sets the correct PDF options from the Page Setup
drop-down list.
You can also supply PDF files to the RIP using spool folder inputs and all forms of network protocols:
AppleTalk (if supported), sockets, and so on. See the summary of managed inputs in Input management on page 192. If necessary, set the PDF options in the Page Setup corresponding to your chosen
managed input.

8.13.10 Limitations and special treatment
The RIP can always print PDF files that are designed to be printed. There are some minor differences
compared to the way in which the RIP handles PostScript language files. Also, the emphasis on

Navigator RIP version 9

User Manual

229

Configuring Input

printed output and limited interactivity means that the support of some optional content in PDF files is
missing or modified, compared to the support in a dedicated PDF viewer.
These features are:
Embedded fonts and font substitution
The Navigator RIP supports the use of fonts embedded in PDF files as well as
fonts already available to the RIP for use with PostScript language jobs. The
embedded fonts can include TrueType (Type 42) fonts, CID (character identifier) composite fonts, and Compact Font Format (CFF) fonts.
When fonts requested by a PDF job are missing, the RIP obeys the setting of
the Abort the job if any fonts are missing check box in the Page Setup Options
dialog box.) See Abort the job if any fonts are missing on page 138 for more
information.
Security settings
The creator of a PDF file can limit access to a PDF file, by requiring a password of the reader or forbidding changing, copying, or printing of the content. The only function relevant to the Navigator RIP is the ability to forbid
printing. In general, the RIP does not print files where the creator has forbidden printing.
Document Information
The Navigator RIP window displays the PDF version number and general
information about the document, as supplied by the author or creating
application.
Most PDF Annotation types are supported but only if:
their Normal Appearance streams are present and correct in the PDF file; and
they have their Print flag set.
Excluded annotations are:
Link and Movie annotations, because they do not present a normal appearance stream in the standard way.
Popup annotations because they only apply to interactive applications (that is,
popping up a window)
TrapNet (also known as, trap network) annotations.
Extensions

The RIP ignores all extended content (for example, multimedia content and
private data) that is labeled as such according to the PDF specification.

8.14 Printing XPS Documents
The RIP can print XML Paper Specification (XPS) files that conform to v1.0 of the XPS specification.
The following PrintTickets are supported if they are present within an XPS Document:

230

User Manual

Navigator RIP version 9

8.15 Printing HD Photo images



DocumentPageRanges



PageBlendColorSpace



PageMediaSize



PageResolution

The way that the RIP handles the DocumentPageRanges, PageBlendColorSpace and PageMediaSize PrintTicket keys depends on the settings of the XPS Options dialog. By default, all PrintTicket settings are
ignored, but these three keys can be honoured if you choose to do so.
The only other PrintTicket setting which might get honoured is PageResolution. This will only happen
when the Override resolution in job option is not checked in the Page Setup dialog.
For further information see XPS Options on page 145.

8.15 Printing HD Photo images
From v8.0 the RIP supports direct ripping of v1.0 HD Photo images (previously WMPhoto).
The RIP can print HD Photo files using the Navigator RIP > Print File command, or from a spool folder.
To view *.wdp files (HD Photo images) in the file selection dialog, select All Files *.* in the ‘Files of
type’ field and browse to the required file.
In compliance with v1.0 of the XPS specification, the RIP supports v1.0 HD Photo images and XPS
Documents containing v 1.0 HD Photo images are processed correctly.

8.16 Printing JPEG and JFIF files
The RIP can print JPEG and JFIF files using the Navigator RIP > Print File command, or from a spool
folder.
The simplest way to print JPEG and JFIF files is using the Navigator RIP > Print File command.
To see a listing of JPEG and JFIF files in the current folder, use the JPEG Files or All Files option in the
Files of type drop-down list of the Print File dialog box.
You can also supply JPEG and JFIF files to the Navigator RIP using spool folder inputs. See
Section 8.5, Using the Spool Folder input folder for details.
When ColorPro is enabled, the RIP can detect and utilize an ICC profile embedded in a JPEG file. See
the ColorPro User Guide for details.

8.16.1 Limitations
A JPEG file in Progressive format (a format option in Adobe Photoshop) cannot be printed by the
Navigator RIP. Progressive format is often used for web downloads.

Navigator RIP version 9

User Manual

231

Configuring Input

8.17 Printing GIF files
The Navigator RIP can print GIF (Graphics Interchange Format) files using the Navigator RIP > Print
File command, or from a spool folder.
The easiest way to print GIF files is using the Navigator RIP > Print File command.
To see a listing of GIF files in the current folder, use the GIF Files or All Files option in the Files of type
drop-down list of the Print File dialog box.

8.18 Printing TIFF/IT files
The Navigator RIP supports the imaging of TIFF/IT Profile 1 files, generally referred to as
TIFF/IT-P1 files, a common method of transferring images for use in advertising.
This section summarizes the history of the file format and its uses before describing how to enable and
use imaging of these files in the RIP. The description of use starts with Installation and requirements
on page 234. See also Printing TIFF 6.0 files on page 235.

8.18.1 General
The Tag Image File Format (TIFF) is a well-established and popular file format for raster images.
There have been a number of published standards for the format of TIFF files, each successive standard generally being more complex than the last. This growing complexity has reflected the format
increasing in flexibility and providing for private extensions to the format. The result has been that
TIFF now represents a family of file formats and there are many programs that implement only the
more popular parts of these formats.
The RIP supports the imaging of TIFF/IT Profile 1 files, generally referred to as TIFF/IT-P1 files, a
common method of transferring images for use in advertising. The International Standards Organization (ISO) Draft International Standard 12639 describes the TIFF/IT and TIFF/IT-P1 formats. Relevant earlier standards are ANSI IT8.8 and the Aldus TIFF 6.0 standard (now maintained by Adobe).
The TIFF/IT-P1 format is being promoted by a body called Digital Distribution of Advertising for
Publications. It provides a clean interface for the proprietary color electronic prepress systems (CEPS)
formats such as the Scitex CT/LW format.
TIFF files can contain many different types of data but, in general, a single TIFF/IT-P1 file contains
only one kind of data from a total of six possibilities, each known by a two-letter abbreviation as listed
in Table 8.2.
The exception is the FP file, which includes layout information and the details of some combination of
files, each containing CT, HC, or LW data‚ it is convenient to call these other files subfiles of the FP
file. The data may appear in any order within the FP file but applications must image it in a set order.
There must be at least one subfile in an FP file, but no more than one of each type. For example, an FP
file cannot contain more than one CT file and it is typical for FP jobs to contain only a CT subfile and
an LW subfile.

232

User Manual

Navigator RIP version 9

8.18

Printing TIFF/IT files

The full list of data types with their typical uses is:
Table 8.2 TIFF/IT data type codes and usage
Data type

Usage

FP

Final Page (layout for CT, HC, and LW)

CT

Contone, typically low resolution

LW

Line Work

HC

High resolution Contone

BL

Binary Line work (not an FP subfile)

BP

Binary Picture (not an FP subfile)

MP

Monochrome Picture (not an FP subfile)

Some of these data types are partly compatible with the corresponding definitions in the TIFF 6.0
standard.
The largest difference with TIFF 6.0 is that TIFF/IT has only one image per file. The FP file format
can have up to four Image File Directories (IFDs), but only one image the preview image for the FP
layout.
The major restrictions on TIFF/IT-P1 compared to TIFF/IT are that TIFF/IT-P1:


Uses CYMK only (when appropriate).



Is pixel interleaved (when appropriate).



Has a single choice of image orientation.



Has a single choice of dot range.

The Navigator RIP images an FP file by rendering the referenced CT, HC, and LW subfiles, in that
strict order. Order is significant because the HC and LW subfile types can include transparent regions
able to reveal images rendered from previous subfiles.
When the RIP renders subfiles as part of an FP job, it uses extra information in the FP file to determine the overall size of the page, and position each subfile (which can be smaller) within that page.
The RIP can also image a single CT, HC, or LW file independently of an FP file. For each of these
files, the RIP locates the image origin at the PostScript language origin relative to coordinates (0,0) at
the bottom left of the page. For example, this provides a limited proofing capability but be careful to
avoid printing a partial image when the subfiles are available before the FP file.
When ColorPro is enabled, the RIP can detect and utilize an ICC profile embedded in a TIFF file. See
the ColorPro User Guide for details.

Navigator RIP version 9

User Manual

233

Configuring Input

8.18.2 Installation and requirements
You must enable the RIP to print TIFF/IT files, by entering a password or key number issued to you
by your supplier. Note that TIFF 6.0 input is always enabled.
1. Display the Configure RIP dialog box and click Extras.
2. In the Configure RIP Extras dialog box, select the item TIFF/IT in the list.
3. Click the Add button. In the Enable Feature dialog box that appears, enter the key number issued
to you for use with TIFF/IT, and then click OK to return to the Configure RIP Extras dialog box,
and OK again to return to the Configure RIP dialog box.
If you attempt to print TIFF/IT-P1 files when the TIFF/IT option is not enabled, then depending on the
input method chosen, the TIFF 6.0 input option may attempt to process the parts of the file that it recognizes as TIFF. This is unlikely to produce the desired result.
TIFF/IT files can result in very large page buffers and, potentially, cause painting to multiple partial
page buffers. We recommend that you allocate 128 MB of memory to the RIP if possible, with an
absolute minimum allocation of 64 MB RAM.
It is not possible to run a simple spool folder where any of the CT, HC, LW, or FP files may arrive
first: the result may be partial images. The spool folder can accept TIFF/IT-P1 files but only if the
order of arrival and file naming can be controlled. See page page 203 for details of configuring the
spool folder for a specially controlled source of TIFF/IT-P1 files. If the order of arrival or naming is
unsuitable or unpredictable, using Print File from the Navigator RIP menu is the simplest reliable
method of ensuring that the RIP images the intended file or combination of files.

8.18.3 Usage
To print a TIFF/IT file, first choose a Page Setup with a large enough imaging area and an appropriate
resolution for the high resolution data types.
Next, choose the option Print File from the Navigator RIP menu. Figure 8.8, page 216, shows the dialog
box that appears. Display the contents of the folder holding the file that you want to print.
Choose the file that you want to print. Typically, this is an FP file if you are imaging a finished page
but you can specify a subfile: for example, to proof it alone. There is no enforced file name convention
but the two letters of the data type usually appear in the name.
For the example of a CT file with name file, you may see any of:
file.ct
file.ict
file.CT
file.ICT

To make sure that you see all files, choose All Files (*.*) in the Files of type drop-down list.
Select the file you want to print, and click Print.

234

User Manual

Navigator RIP version 9

8.19

Printing TIFF 6.0 files

If you are printing an FP file, the RIP displays a progress dial while reading each of the files referenced by the FP file and the Navigator RIP window shows text similar to the following example:
% tiffdev: reading "H:\Suites\Tiffit\66.fp" as a
TIFF/IT-P1 FP (Final Page) standalone file
Starting Job On 24 April 1998 08:51:42
Using Color Setup "(None)"
Using default device calibration
% tiffdev: reading "H:\Suites\Tiffit\66.ct" as a
TIFF/IT-P1 CT (low-resolution contone) subfile of an FP job
% tiffdev: reading "H:\Suites\Tiffit\66.lw" as a
TIFF/IT-P1 LW (linework) subfile of an FP job
Interpretation time: 40 seconds
...

If you are printing a subfile (data types CT, HC, or LW), you see less text after clicking Print:
% tiffdev: reading "H:\Suites\Tiffit\66.ct" as a
TIFF/IT-P1 CT (low-resolution contone) standalone file
Starting Job On 24 April 1998 08:51:42
Using Color Setup "(None)"
Using default device calibration
Interpretation time: 37 seconds
...

If you attempt to print TIFF/IT-P1 files when the TIFF/IT option is not enabled, then depending on the
input method chosen, the TIFF 6.0 input option may attempt to process the parts of the file that it recognizes as TIFF. This is unlikely to produce the desired result. See also Printing TIFF 6.0 files on page
235. In the following example a TIFF/IT-P1 file is processed as a TIFF 6.0 file.
% tiffdev: reading "H:\Suites\Tiffit\test.tif" as a
TIFF 6.0 baseline (with extensions) standalone file
Starting Job On 24 April 1998 08:51:42
Using Color Setup "(None)"
Using default device calibration
% tiffdev: TIFF6: compression is None
% tiffdev: bits per sample = 1
% tiffdev: samples per pixel (planes) = 1 (bilevel or grayscale)
Interpretation time: 0 seconds
...

However, if the TIFF 6.0 input option does not recognize any part of the file as TIFF, you will see the
message:
open: the TIFF 6.0 or TIFF/IT file
is either corrupt, unsupported, of an unrecognised
type or the appropriate file type is not enabled
in Configure RIP / Extras

The RIP displays the same message if you attempt to image TIFF/IT data types that it does not support
or to image files that do not conform to the TIFF/IT-P1 profile.

8.19 Printing TIFF 6.0 files
The RIP accepts TIFF 6.0 baseline files, with the exceptions and extensions listed under Limitations
and extensions on page 236.

Navigator RIP version 9

User Manual

235

Configuring Input

This support extends to all TIFF files produced by the Navigator RIP TIFF output plugin.
Note: From v 5.5r1 the Navigator RIP can handle RGB Composite (Band) or CMYK Composite (Band)
Style but only with the tiffexec operator. tiffdev still does not support these styles.
Note: The Eclipse Release and later RIPs support Palette color (Index color) TIFF files.

8.19.1 Procedures
TIFF 6.0 input is always enabled, but operates only with Spool Folder input and the Print File command. (It is also possible to use TIFF 6.0 input from PostScript language instructions.)
Copy the TIFF file to the correct folder for Spool Folder input, or select it in the dialog box shown
when you choose Print File. If you use Print File, type the file name or make sure that the RIP is displaying all files in the list of files. TIFF files often have the file name extension .TIF but this is not
required.
This extract from the text displayed in the Navigator RIP window shows the messages produced when
successfully processing a TIFF 6.0 file.
Setup loaded: "tiff"
Ripping file %H%/Suites/PEOPLE/68.tif as TIFF.
% tiffdev: reading "H:\Suites\PEOPLE\68.tif" as a
TIFF 6.0 baseline (with extensions) standalone file
Starting Job On Thursday, January 29, 1998 08:48:48
Using Color Setup "(None)"
Using default device calibration
% tiffdev: TIFF6: compression is None
% tiffdev:
bits per sample = 8
% tiffdev:
samples per pixel (planes) = 4 (CMYK)
Interpretation time: 32 seconds
...

The remaining text (not shown here) is related to rendering and output, not to the input.

8.19.2 Limitations and extensions
The Navigator RIP accepts TIFF 6.0 baseline files, with the following differences.
Not supported:


Multiple IFDs (images) per file (the RIP images only the first).



PhotometricInterpretation = 4 (transparency mask).



PlanarConfiguration = 2 (tiffdev). This option is offered by the Navigator RIP TIFF output plugin, as composite RGB or CMYK output with band-interleaving in the Navigator RIP
version 5.0 and later.
Note: From Navigator RIP version 5.5r1 the tiffexec operator supports PlanarConfiguration = 2.

Ignored:


GrayResponseCurve.



GrayResponseUnit.

236

User Manual

Navigator RIP version 9

8.20 Printing page buffer files

Restrictions:


1, 2, 4, 8, or 16 bits per plane.

Additionally, the RIP supports the following full TIFF 6.0 extensions to TIFF 6.0 baseline:


CCITT T.4 compression (group 3 2-D) (1 bit per pixel or bpp).



CCITT T.6 compression (group 4) (1 bpp).



LZW compression, including Differencing Predictor.



CMYK (including DotRange != 0, 255).



JPEG compression.

Note: If you are attempting to RIP images which you have prepared using Photoshop and saved using
ZIP or JPEG compression, the RIP may generate a rangecheck error.
This occurs because ZIP compression is not a recognized TIFF compression format, and as such is not
documented in the TIFF 6.0 specification. The JPEG compression that Photoshop uses is a new version of JPEG data in TIFF files which is also not part of the TIFF 6.0 specification.

8.20 Printing page buffer files
The RIP can print page buffer files produced by another similar installation of the RIP. This is a convenient way of setting up a simple workflow able to transfer pages from one RIP installation to
another.
One example of how this ability can be useful is where you have several RIPs with a single, fast, final
output device, and perhaps various slower proofing printers. It is easy for a single RIP working alone
to keep a slow proofing printer supplied with jobs. On the other hand, it may require many of the Navigator RIPs interpreting jobs and producing page buffers to keep your fast output device busy. One
solution is have the interpreting RIPs all pass their final output page buffers to a single machine running a RIP, whose only function is to accept page buffers and pass them to the fast output device as
quickly as possible.
Note: The separate FlatOut User Guide describes this situation and other, more complex, possibilities
in greater detail.
The method described here is designed for the rerouting of complete and valid page buffers, using
Print File or spool folder inputs.

8.20.1 Requirements and preparation
There are some requirements on the installations involved and you must prepare the receiving and
supplying Navigator RIP installations before use.
The requirements are:




The RIP installation printing (receiving) the page buffers must have the same installed version
of the same output plugin as used to produce the page buffers.
This sending and receiving RIP installations must be running in Multiple or Multiple (Parallel)
modes.

Navigator RIP version 9

User Manual

237

Configuring Input






The sending RIP installations must be version 4.5 or later.
All the RIP installations must be running on the same platform: for example, Windows XP on
an Intel-compatible processor.
It must be acceptable to have the original page buffers destroyed after output.

The preparation of the receiving RIP installation is to enable use of the PGB hot folder page feature and
create a Page Setup. Optionally, you can use the Page Setup with a spool folder input.
1. Enable the page feature, by copying the PGB hot folder file from the SW/Page Features/Examples
folder to the SW/Page Features folder.
2. Create an appropriate Page Setup and choose the PGB hot folder entry in the Enable Feature dropdown list in the Edit Page Setup dialog box.
3. Optionally, if you wish to use a spool folder as input, create a new spool folder input and, in the
Input Channel Edit dialog box, choose the Page Setup that you created in step 2. Configure and
name the spool folder, as described in Configuring a Spool Folder input source on page 201,
then make sure that it is enabled and that the inputs are started.
The preparation of the supplying RIP installation is simpler. Create Page Setups that use the output
device plugin with resolution and other settings that match those you have chosen in the receiving
installation. You do not need to select the PGB hot folder page feature.

8.20.2 Printing procedure
Depending on how you prepared the system, there are two possible methods. You can use both methods together.




Supply page buffer files to a spool folder if you have set up one as part of the preparation
described in Requirements and preparation on page 237.
Choose Navigator RIP > Print File, navigate to the relevant folder, select the wanted files and
click Print. (Page buffer files have the extension .PGB so be sure that you are displaying all
files in the folder.)

Warning: For both methods, the receiving RIP effectively deletes the supplied page buffer file, at the
same time as it creates a new page buffer in its own PageBuffer folder and makes it visible in the Output Controller / Monitor. Even if you use a spool folder input and leave Delete on completion unselected, the completed files copied into the Complete Folder are no longer valid page buffers.
When printing a page buffer file, the RIP displays a message in the main Navigator RIP window, similar to this example, where text in italic varies according to the file and plugin:
Introducing new pagebuffer: %C%/my_folder/00000003.PGB
Pagebuffer created for device: my_device
Page name: 2. fontlist (K)
Total time: 1 seconds
Job Completed: 00000003.PGB

238

User Manual

Navigator RIP version 9

8.21

Entering PostScript language code by hand

The receiving installation of the RIP does not check whether each page buffer was created for an output plugin that the receiving installation has installed. Any page buffers created by a plugin that is not
installed either fail to appear in the Output Controller/Monitor, or trigger the error:
could not access a resource for a plugin device driver

8.21 Entering PostScript language code by hand
If you would like to type code directly into the RIP and see the results interpreted, you can use the
Executive, which allows you to type PostScript language code, and have it interpreted immediately by
the RIP.
If the input system is running, you must stop it using the Navigator RIP > Start Inputs menu option.
When you choose Navigator RIP > Executive, the RIP asks you to select a Page Setup for use with the
Executive.
Note: If you do not choose a Page Setup, the RIP uses the one that you chose last time you used the
Executive. If you have not used the Executive in this RIP session, the first Page Setup in the dropdown list is used. To change the order of this listing, see Reordering Page Setups on page 77.
The RIP then displays a window where you can enter PostScript language code by typing or cutting
and pasting. Any PostScript language code that generates output when executed produces page buffers
exactly like other jobs processed using the same Page Setup. It is wise to hold these page buffers for
inspection in the Output Controller, where you can view or manipulate the page buffers, before sending any suitable pages for output. The Output Controller is available in either of the multiple page
buffer modes.
Note: If you intend to keep page buffers produced from the Executive for any significant time, set a
job name that helps you identify the page buffers.
To generate an interrupt, choose Interrupt from the Executive menu.
To quit the Executive window, type quit or Ctrl+W at the prompt, or choose Stop Executive from the
Executive menu.
Whenever you quit the Executive, the Navigator RIP window displays the following, harmless message:
Job Not Completed: jobname

Remember to restart inputs if you stopped them before using the Executive.

Navigator RIP version 9

User Manual

239

Configuring Input

240

User Manual

Navigator RIP version 9

9
Media Management
This chapter describes how the RIP provides ways of monitoring and managing the use of media in a
range of output devices. It also describes how you can configure these ways to suit your operation.

9.1 Why manage your media?
In a typical printing environment, you might have access to a number of different imagesetters, each
of which takes one of several feed cassettes, or drum recorders, each of which holds a roll of continuous media. You may use several feed cassettes on one imagesetter, or share one between several imagesetters. You may even do both.
Figure 9.1 on page page 242 shows a possible printing environment. This environment can produce
several operational needs.
Suppose that you want to produce output from the RIP on a particular output device, using one of the
cassettes available to you. Which cassette should you use? You do not want to use one that is low on
media, in case it runs out before the job is printed.
At the same time, you want to make the most economical use of media. If a cassette contains just the
right amount of the correct media for a job, it makes sense to use it instead of another one, so that
media is not wasted.
The output (take-up) cassette is also worth monitoring. You may want to process all of a job together
and need to know how much more media the output cassette can accept. Equally, if the output goes to
an online processor, you may need to know that there is enough film output for the processor to handle
satisfactorily.
In addition, there may be times when you want to cut the media in a particular cassette, or feed extra
media. If you are working at your computer, and the output device is not located nearby, doing this by
hand might be inconvenient.

Navigator RIP version 9

User Manual

241

Media Management

Online processor Take-up bin

Multiple feed
cassettes for film
and paper

Imagesetters

Take-up cassette

Figure 9.1 Using multiple output devices and cassettes

9.1.1 Overview of the Navigator RIP capabilities
The Navigator RIP media management can meet all these needs, subject to operating with suitable
output devices and getting a minimal amount of information from the operator. These requirements
are explained in later parts of this section.
The RIP can manage up to sixteen feed cassettes at once, using as many suitable output devices as are
connected.
For each cassette (or roll-fed device) it can: monitor the media remaining, display the amount of
media for the particular cassette in use, and issue automatic warnings when this amount is low.
The RIP can also instruct the output device to perform cut and feed operations, both automatically (at
pre-specified intervals and events) and interactively, on request (when you choose menu options). The
physical device itself must support software control of these functions.
You can still perform manual operations while using the RIP media management. The purpose of
media management is to reduce the need for routine manual operation and record keeping.
A media saving feature is also available. For more information see Advanced Media Saving on page
112.

9.1.2 Suitable devices
You will gain some benefit from using media management with most types of output device. Media
management performs most efficiently when the following assumptions are satisfied:


242

The physical output devices are roll fed from cassettes. The RIP media management is not
suited to, or necessary for, sheet-fed devices.

User Manual

Navigator RIP version 9

9.2 Advancing and cutting media interactively





When you change a feed cassette, you also mount an empty output cassette by changing or
emptying the full one.
There is only one feed cassette mounted at a time. This is the usual case.
There is at least one imagesetter which can have several input cassettes mounted at one time.



Each physical device is represented by one Navigator RIP output device. This is the usual case.
The possibility of having multiple output devices arises because there are some physical devices
which can provide multiple types of output. One example provides a dual technology (dye sublimation and thermal transfer) engine in one unit. These technologies have different characteristics and require separate strategies regarding calibration and color separation‚ providing each
technology with its own output device type is a likely solution.

9.1.3 What you need to do
Media management reduces and simplifies your routine work but you need to perform a small amount
of setting up for each cassette or media source before starting to use media management. This setting
up includes:


Specifying when automatic cuts or feeds and warnings should occur.
You do this in the Media Manager dialog box.



Naming cassettes and specifying their initial contents.
You do this in the Cassette Manager dialog box.

After this setting up, all you have to do is tell the RIP when you change something that affects its
records of media use:


Which cassette is in use.
You do this in the Edit Page Setup dialog box, using the Cassette menu.



How much media you have put in a cassette when you refill it, and when you perform a manual
operation that affects the amount of media.
You do this in the Cassette Manager dialog box.

Note: Any management system that monitors the amount of media remaining relies upon knowing the
amount that was available when the system was set up, since there is usually no automatic means of
detecting this. It is therefore essential that you inform the RIP how much media is available to each
cassette whenever it changes (for instance, when you refill one).
You must also ensure that the cassette being used to process a job is the same one the RIP thinks is
being used. You can check this by seeing which cassette is chosen in the selected Page Setup.

9.2 Advancing and cutting media interactively
You can use the interactive options described in this section immediately, without performing any
preparation.
This can be useful when you are starting to use a new system. Once you have established the effects of
the options and decided which of these you want to use regularly, you can set up automatic procedures

Navigator RIP version 9

User Manual

243

Media Management

to reduce your need for the interactive options: see Advancing and cutting media automatically on
page 245. The interactive options (and any manual controls on the output device) remain useful for
unusual jobs or special tests.

9.2.1 Device menu
Each interactive option is a Navigator RIP menu command which affects the selected device and the
cassette mounted in that device.
The commands are in a menu in the main Navigator RIP window which appears between the Edit
menu and the Color menu. The menu changes its name to indicate the currently selected output device.
Note: For simplicity, this manual refers to this menu as the Device menu. The commands available in
this menu can vary to suit the currently selected output device.
The first option in the Device menu is Select Device. Choose this option to see the Select Output Device
dialog box, where you can see a list of available output devices. Select a device and click Select.
The possible names in the Select Output Device dialog box and thus of the Device menu are exactly the
same as the ones you can choose from the Output device list in the Edit Page Setup dialog box. For
example, the name might be UltreP or ExxtraSetter if the RIP is driving only one imagesetter, or only
one of each type of imagesetter. If you are driving two imagesetters of the same type, there might be
names such as Ultre_1 and Ultre_2: you can choose a name for each device when you set it up in the
Device Manager.

9.2.2 Using the Device menu
For most output devices, the Device menu contains commands to advance (feed) the media and to cut
it.
On some output device types, there may be extra commands or some of the default commands may be
grayed out. (Any output device that you choose from the Device Manager can have its own version of
the Device menu: in technical terms, the menu is specified in the relevant output plugin at the time of
software manufacture.)
For example, if a device takes a long time to load film, there could be a pre-load command allowing
you to load film during the processing of a page to avoid delay once the page is ready to image.


To advance the media in the current device, choose one of the Advance menu options, when
available.
There are usually three options to advance the media, allowing you to feed 1, 3, or 6 inches of
media through the imagesetter. (The relevant output plugin can be written to offer any number
of similar options, specifying other lengths or units.)

244

User Manual

Navigator RIP version 9

9.3



Advancing and cutting media automatically

To cut the media in the current device, choose one of the Cut menu options. There are commands to cut with or without feeding media.
If you choose Cut media with feed, or type Ctrl+K, the RIP will feed a predetermined length of
media through the imagesetter, and then cut. You can specify the amount of media to feed
through, in the Media Manager. See Automatic use on page 245, for details of how to set this
length.
If you choose Cut media no feed, or type Ctrl+L, the RIP will cut the film without feeding any
extra media.
Note: Some output devices, for instance the PelBox, always perform a feed before a cut. The
RIP cannot override this feed, but it can keep a record of how much media is fed. If you use
such a device, read its manual to find out this feed length, and enter the value in the box labeled
Built in cut length in the Media Manager dialog box. See Hardware feeds on page 254.

9.3 Advancing and cutting media automatically
The automatic options described in this section reduce the number of times you need to use the RIP
menu commands or front panel buttons on the physical output device. You must do some setting up to
make sure that the automatic options do what you want.
The manual options remain useful for use with unusual jobs or special tests: see Advancing and cutting media interactively on page 243.

9.3.1 Automatic use
The RIP can advance the media in a cassette or drum recorder automatically. With many imagesetters,
the RIP can also cut media, although this depends on the particular device you are using.
Figure 9.1 shows two possible schemes for advancing and cutting media automatically. The RIP supports these schemes and many others.

Navigator RIP version 9

User Manual

245

Media Management

Flow of exposed media

P2

P1

P3

Job 3

P2

P1

P4

Job 2

P3

P2

P1

P2

P1

Job 1

Advance and cut only between jobs

P2

P1

P3

P2

P1

P4

P3

Advance every page and cut between every 4 pages

Figure 9.2 Some options for handling output media automatically

Using the Media Manager, you can make the RIP perform media cuts and feeds automatically, choosing when and how much media to feed through and when to cut.
You can also disable or re-enable all media management facilities as often as you wish. (Navigator
RIP output plugins designed for sheet-fed devices disable media management on those devices automatically.) You will probably want to disable media management when you share feed cassettes
between different devices this will prevent the RIP issuing meaningless warnings about low media
levels.
Display the Media Manager dialog box by choosing Media Manager from the Output menu.

246

User Manual

Navigator RIP version 9

9.3

Advancing and cutting media automatically

Figure 9.3 shows the RIP Media Manager dialog box. This dialog box allows you to configure and
control media.

Figure 9.3 Media Manager dialog box

The RIP displays the name of the current device at the top of the dialog box, in the Device drop-down
list. All selections that you make in this dialog box apply to the displayed device (and to all cassettes
that you use on this device). These selections are not confirmed until you click OK.
You can select another device using the Device list, then set up different options for managing media in
the new device.
Click OK to confirm your media management choices for the device(s) that you have edited. Click
Cancel to abandon all changes made to media management (on any device) in the current use of the
Media Manager.

9.3.2 Enabling and disabling media management
In the Media Manager dialog box, there is a check box labeled Disable media management.




Select this box to turn off the automatic media management facilities for the output device. If
you turn off media management, there will be no current cassette selected in the Cassette Manager (See Setting up the monitoring system on page 250).
Leave the box clear to enable media management.

Note: After enabling or re-enabling media management, you must verify the contents of each cassette
used on that output device. For details, see Setting up the monitoring system on page 250.

9.3.3 Cutting media
With media management enabled, you can choose when the RIP will make automatic cuts.
Note: Any cut operation disables output, unless the output device is using an online processor (developer). Typically, you will need to fit a new take-up cassette before re-enabling the RIP outputs: the
RIP displays a message to remind you of this.

Navigator RIP version 9

User Manual

247

Media Management

You can choose from three different policies, available on the left of the Media Manager, in the section
labeled Cut. The three choices are:


Cut the media after each job.



Cut the media after a certain number of pages.



Cut the media when (or slightly before) a certain length of it has been exposed.

To use any of these options, select the check box labeled appropriately and, if there is a text box alongside the label, type a suitable value in that box.
If you choose a combination of conditions for a cut, the RIP will cut whenever any one of those conditions becomes true, and will then reset all counts of length or pages.
To cut the media:
After every job printed
select the check box labeled after job. The RIP will automatically cut the
media after every job output on the current device.
After a number of pages
select the check box labeled after pages and enter the number, which must be
a whole number‚ in the adjacent text box. The RIP will automatically cut the
media after that number of pages has been printed.
At a certain length 
select the before length check box and specify a length in the box. This length
is the maximum that will be exposed. For example, you might choose a
length that is convenient to process.
You can select the units you wish to use for length from the Select units dropdown list in the bottom left of the Media Manager. The options available are
feet, inches, meters, and centimeters.
Note: The RIP never cuts the media while part of the way through printing a page. Where a cut at the
exact length would fall within a page, the RIP performs the cut before outputting the page. This occurs
even if, for example, you specify a length of 12 inches and a page is 18 inches long.

9.3.4 Feeding media
The options on the right of the Media Manager let you specify when the RIP will feed media automatically. There are three feed policies under Paper feed:


Feed the media around each page.



Feed the media between jobs.



Feed the media before every cut.

See below for a fuller description of these policies and some of the possible reasons for wanting extra
media feeds in each of the specified situations. (The remaining entries in this section of the dialog box
describe characteristics of the output device.)

248

User Manual

Navigator RIP version 9

9.4 Monitoring media

To use any of these options, type the feed length that you want in the text box alongside the appropriate label. Type 0 (zero) into the text box if you do not want an automatic feed.
You can choose which units to use for the lengths from the Select units drop-down list above the OK
button‚ the available units are feet, inches, meters, centimeters, picas, and points.
Some reasons, and the details, for each feed policy are as follows:
Around each page
Feed through some media around every page that is produced, perhaps so that
you can perform cuts by hand more easily. Half of this amount will be fed
before the page and half after it.
Between jobs

Feed through some media after every job that has been processed, perhaps to
make it easier to see where one job ends and the next starts.
Note: This feed after a job will not occur if there is a cut after the last page of
the job, caused by either of the cut after pages or cut after job settings.

Before cut

Feed through some media before making any cut, perhaps to stop film near a
cut being exposed to external light.
The RIP feeds the amount of media you specify here before performing any
of the automatic cuts described on page page 247, or a cut that you have
requested by choosing Cut media with feed from the Device menu. See also
Hardware feeds on page 254.

9.3.5 Interaction with other Navigator RIP options
The description just given of automatic cutting and feeding is accurate but there is also a degree of
interaction with the RIP options to use media as economically as possible. These options either reorient pages or pack them together so that, for example, more than one page is imaged side by side in the
length of media that would otherwise be used by one page.
The results are that the page length can vary or that the RIP treats several pages as one unit (and that
this unit is treated as a page by the media management software). This may be unexpected but it
should not cause any problems.
The relevant options occur in the Optimization and Enable Feature drop-down lists of the Edit Page
Setup dialog box. See Advanced Media Saving on page 112 and Features on page 133 for a fuller
description of these options.

9.4 Monitoring media
When you start monitoring media, you must tell the RIP how much media is in each cassette. Thereafter, the RIP maintains a record of how much media remains, and will warn you when any cassette is
running low.

Navigator RIP version 9

User Manual

249

Media Management

9.4.1 Setting up the monitoring system
The RIP monitors the feed cassette providing the media, rather than the output device used. This is
because any one output device may take several different feed cassettes. For instance, you may have
an imagesetter that can produce output on either film or paper, and you may keep two cassettes‚ one
loaded with film and one loaded with paper.
Note: If you have an output device that uses a roll feed, you can monitor its use of media by treating it
as a device with a permanently mounted cassette.
Before processing any jobs, you need to tell the RIP about the cassettes you are using and give details
of the media currently in each cassette. You do this from the Cassette Manager dialog box. Click the
Cassette Manager button in the Edit Page Setup dialog box or choose Output > Cassette Manager to open
the Cassette Manager dialog box, as shown in Figure 9.4.

9.4.2 Cassette Manager and Edit Cassette dialog box
The main window of the Cassette Manager lists each available cassette, so that you can see and compare the information relating to different cassettes.
A new installation of the Navigator RIP lists one cassette in the Cassette Manager. You can add more
cassettes at any time, and subsequently edit their information or delete their entries using the Edit,
New, Copy, and Delete buttons.
There is a related Edit Cassette dialog box in which you can alter the information for a particular cassette.

Figure 9.4 Cassette Manager dialog box

The information in the Cassette Manager also appears in the Edit Cassette dialog box: each category is
listed below.

250

User Manual

Navigator RIP version 9

9.4 Monitoring media

There are two buttons which appear in the Cassette Manager only. Use these buttons to tell the RIP
when you have performed a manual operation. (On some output devices, a manual operation may be
the only option or it may be quicker than an operation driven by the RIP.)
Manual Cut Done 

Click this button when you have cut the media in the current device.
Manual Feed Done 

Click this button when you have performed a manual feed of media in the
current device.
Before using one of these buttons, you must set up the amount of media used in the corresponding
manual operation. These quantities are labeled Manual feed length and Manual cut length in the Media
Manager. See Hardware feeds on page 254.
To set up or change the details for a cassette, select the relevant cassette in the Cassette Manager window and click the Edit button. Figure 9.5 shows the Edit Cassette dialog box that appears, containing
the details for the selected cassette.

Figure 9.5 Edit Cassette dialog box

The RIP displays the following values in both the Edit Cassette dialog box and the Cassette Manager.
You can only change these values from within the Edit Cassette dialog box.
The RIP displays the information about a cassette in columns in the Cassette Manager and in corresponding text boxes in the Edit Cassette dialog box.
Cassette name

An identifying name. This name will be displayed on the Cassette drop-down
list in the Edit Page Setup dialog box. The name is purely for your own convenience‚ you can change it to any name you like. Choose a name that allows
you to identify the cassette and that suits your situation and your procedures.
You might find it helpful to attach a label with this name (and the type of
media) to the actual cassette.
For example, if you use two cassettes only on an Ultre imagesetter and only
for specific types of media then you might name these cassettes: UltreFilm1
and UltrePaper2. An alternative solution in the same situation might be
Ultre1 and Ultre2, with a separate record of the type of media. If you use the
same cassette to hold paper and use it for proofs on different output devices
then you might call it PaperProof.

Navigator RIP version 9

User Manual

251

Media Management

Note: The symbol > in front of the cassette name indicates the cassette in use
on the current or most recently used output device.
Media type

The type of media held in the selected cassette. It lets you tell quickly
whether, for instance, the cassette holds paper or film. The field Cassette
Name is purely for your own convenience you can change it to anything you
like.
The entry No Media means that no one has yet specified a type of media for
the cassette.

Media width

Imageable
width

The width of the media in the selected cassette or drum recorder. The RIP
uses this value when calculating in which orientation to print a page if you
are using the Media Saving option in the Optimization menu. (See Printing
effects on page 121.)
You must set this value to the actual width of media that can be printed on
(the imageable width) because some output devices cannot image right up to
the edge of the media. If you enter the total width of the media and the output
device has a smaller imageable width then some large pages are likely to
extend into the non-imageable area and those output pages will be clipped or
visually corrupted when the RIP attempts to output them. The illustration to
the left shows an example of clipping where a page (the rectangle) is wider
than the imageable width (arrowed): only the area shown shaded is imaged
successfully.

Remaining length 

The amount of media left inside the cassette. The RIP updates this value
whenever it advances or prints media. (The RIP also tests the updated value
against your choice of threshold values so that it can warn you when the
media is running low.)
You must type in the length that you have loaded whenever you refill a cassette with media.
Number

A unique number that the RIP uses to keep track of the cassette. You can edit
this number only when creating an entry for a new cassette‚the RIP suggests
an unused number, but you can use any other unused number.

Units

The units used in the measurement fields in this dialog box. Use this dropdown list to choose any convenient unit. The RIP converts any figures
already displayed to the units you choose.)

Note: The unit of measurement that you choose here is also used to display media usage in the Media
Monitor window: see Monitoring media on page 249).

252

User Manual

Navigator RIP version 9

9.4 Monitoring media

9.4.2.1 Closing the dialog boxes
You must close the Cassette Manager before you can use any tool bar buttons or menu options in the
Navigator RIP.
Click OK to confirm all the changes you have made in this use of the Edit Cassette dialog box. This
confirmation is provisional: you must also click OK in the Cassette Manager to finally save your
changes. The OK button saves the changes you have made and closes the Cassette Manager. If you
opened the Cassette Manager from the Edit Page Setup dialog box, you can also save the changes by
clicking the Select button. In addition to saving the changes, the Select button displays the selected cassette in the Edit Page Setup dialog box. Click Cancel to discard all changes.
Note: If you open the Cassette Manager from the Edit Page Setup dialog box, changes that you make
in the Cassette Manager are independent of the Edit Page Setup dialog box. For example, if you create
a cassette, and close the Edit Cassette and Cassette Manager dialog boxes with OK or Select, the new
style will remain even if you cancel the Edit Page Setup dialog box.

9.4.3 Using media management
When using media management, you must select both the feed cassette to be used and the output
device, in the Edit Page Setup dialog box (as described in Cassette management on page 135). When
printing a job, the RIP uses the cassette selected in the saved Page Setup associated with the input
source providing the job.
When you perform a manual operation on the output device, use the Manual Cut Done or Manual Feed
Done buttons in the Cassette Manager dialog box.

When you refill a cassette, you must use the Edit Cassette dialog box to inform the RIP how much
media is now in the cassette.

9.4.4 Using media management with multiple setups
Sometimes you will need to process a job on a device that had previously used one cassette and now
must use another. This is quite likely to happen when using a number of different Page Setups.
When a change of cassette is required, the RIP will warn you that the correct cassette is not in the current device, and will halt printing until you have loaded it. This ensures that you will never waste time
or media by printing jobs on the wrong cassette.
If you are running the RIP in a Multiple mode, the warning will appear in the progress box of the Output Controller. If you are running in a Single mode, it will appear in a separate progress box on the
screen.
Note: The RIP cannot tell which cassette is loaded on the output device, so it will issue a warning
even if you have changed to the correct cassette after the previous job was produced.
Always inform the RIP when you physically change cassettes, by selecting a Page Setup that uses the
new cassette.

Navigator RIP version 9

User Manual

253

Media Management

9.4.5 Low media warnings
The RIP can warn you when the amount of media in the current feed cassette is low and before the
media actually runs out. You can specify thresholds for up to three warnings using the Media Manager.
In the section labeled Length warnings, type values into the First, Second, and Final text boxes. The RIP
sorts the three values so that the length for the first warning is greater than for the second, which itself
is made greater than the final threshold. All three warnings appear in the Output Controller: they are
Media low, Media very low, and MEDIA VERY LOW.
Choose the units used for these lengths from the Select units drop-down list immediately below the
Length warnings text boxes‚ the options available are feet, inches, meters, or centimeters.
Note: Once you have refilled a cassette, you must update its details in the Cassette Manager if you
want media management to continue to work correctly.

9.4.6 Hardware feeds
Some imagesetters automatically feed the media a certain amount before printing any page or before
performing a cut; and they also may have front panel buttons that trigger these or similar actions. The
RIP cannot override these hardware feeds but it can record them and calculate their effects on the
amount of media left in any input cassette.
If you have an imagesetter that issues hardware feeds, and you use media management, you must tell
the RIP how much media is fed through when a hardware feed is performed, so that it can take this
into account.
This involves two stages: set up and routine use.
Perform the set up by selecting the output device in the Device drop-down list in the Media Manager. The relevant options are on the right of the Media Manager:Built in feed
length
Type into this text box the amount of media that the output device feeds when
it receives a software feed request.
The Media Manager will add this amount to its record of the amount of media
consumed for every job processed, and deduct it from the details of the relevant cassette. This is used in addition to the around each page feed value.
Built in cut length 

Type into this text box the amount of media that the output device feeds
before a cut triggered by software.
Whenever a cut is issued, the RIP will subtract this amount from its record of
the remaining length of media for the current cassette. This is used in addition
to the before cut feed value.
Manual feed length 

Type into this text box the amount of media that the output device feeds when
a front panel button triggers a media feed.

254

User Manual

Navigator RIP version 9

9.4 Monitoring media

The RIP adds this amount to its record of the amount of media consumed, and
deducts it from the details of the relevant feed cassette.
Manual cut length 

Type into this text box the amount of media that the current output device
feeds before a cut triggered by a front panel button.
Whenever you inform the RIP that you have performed a cut, the RIP subtracts this amount from its record of the remaining length of media in the
current cassette.
For these options, you can choose units from the Select units drop-down list at the bottom of the dialog
box. The units available are feet, inches, meters, centimeters, picas, or points.
Note: The feed lengths for built-in and manual operation may be the same. If they are the same, enter
the same value in the two fields.
In routine use, there are two cases:




The RIP takes account of the values you set up when calculating the effects of any automatic
operations and ones that you request from the Device menu. You do not need to do anything
extra.
If you perform a manual operation by using controls on the output device, you must inform the
RIP. Display the Cassette Manager and click the button Manual Cut Done or Manual Feed Done
whenever you perform the corresponding manual operation. See Figure 9.4, page 250, and the
following description of the buttons.

9.4.7 Online developers or processors
If you are using an online developer with a particular output device, you must inform the RIP so that it
can handle that device correctly.
There is an obvious benefit to using an online developer because media that emerges from the output
device is fed directly to the developer, which produces the image automatically. However, online
developers need to be fed a certain amount of media before they can develop any images‚ for example,
a particular online developer may require a minimum of two feet of media. If the RIP or an operator
performs a cut before the required amount of media has been exposed, then any images on the exposed
media will not be developed automatically, and there may be a media jam in the developer. It is easy to
avoid this problem.
To set up the RIP to drive an output device with an online developer, first make that device current and
display the Media Manager. Make these two settings:
Using online developer

Select this box to show that you are using an online developer.
Minimum length before cut 

Enter in this text box the minimum length of media that the online developer
requires for processing.

Navigator RIP version 9

User Manual

255

Media Management

You can choose the units for this length from the Select units drop-down list
immediately below. The units available are feet, inches, meters, centimeters,
picas, and points.
In routine use, you do not need to do anything extra. The RIP will make an automatic cut only if there
is sufficient exposed media to enable the online developer to work effectively. If you need to force a
cut, select Cut with feed from the Device menu. This command feeds enough media to pad the output to
the Minimum length before cut value, and then performs a cut.
When using an online developer, the RIP does not issue warnings to change take-up cassettes, and
does not disable output after a cut.

9.4.8 Monitoring your media
When you are using media management, the RIP can display information about media usage on your
computer screen and keep the information up to date as jobs are output.
Choose Media Monitor from the Output menu to display the information.
The information appears in the Media Monitor, shown in Figure 9.6. By default, when in Multiple
(Parallel) mode, the RIP displays both the Output Controller and the Media Monitor.

Figure 9.6 Media Monitor window

The media information is presented in the following fields:
The name of the feed cassette.

Name

A series of asterisks ( *** ) in this field shows that the current output device
has media management disabled.
The type of media in the feed cassette.

Type

A series of asterisks ( *** ) in this field has the same meaning as in the Name
field. The entry No Film, No Media, or a blank entry, means that no one has
defined the type of media, not that the cassette is empty.
Pages

The number of pages exposed since the last cut was performed.

Length

The amount of media left in the current feed cassette.
This length is shown in the unit of measurement that you can choose in the
Units field in this dialog box.

Exposed

256

User Manual

The amount of media that has been exposed since a cut was last performed.
This is also the amount in the take-up cassette.

Navigator RIP version 9

9.4 Monitoring media

Units

Navigator RIP version 9

The units of measurement for figures in the Length and Exposed fields.
Choose any convenient unit from those listed.

User Manual

257

Media Management

258

User Manual

Navigator RIP version 9

10
Simple Imposition
This chapter describes Simple Imposition, the in-RIP imposition option.

10.1 What is Simple imposition?
Navigator RIP Simple imposition provides facilities to impose incoming pages using some of the most
common imposition layout schemes used for smaller format presses. This is achieved by the selection
of various options within an Imposition setup dialog. You are able to create and save as many imposition configurations as you wish. In addition to this, once an imposition configuration is created, you
can apply that configuration to any Page Setup by selecting it from a menu in the Edit Page Setup dialog. When you have created an imposition setup you can use that setup as the basis for further imposition setups.

10.2 Input file formats
The Navigator RIP can accept various file formats. Table 10.1 shows which input file formats are
compatible with, and can be used with, which imposition schemes:
Input file format

Imposition schemes

PDF, TIFF, JPEG, EPS

All schemes

PostScript Language files

One-Up, single-sided
N-Up, single-sided

Table 10.1 File format compatibility

Note: Simple imposition is not compatible with jobs submitted through JDF.
Of all the schemes, only One-up, single-sided and N-up, single-sided may be used when processing PostScript language files. PDF files may be submitted to any scheme, and single page formats such as
TIFF, EPS and JPEG may be submitted to any scheme, but only really make sense for use with One-up,
single-sided and Step and repeat, single-sided schemes, because all others are intended to be applied to
multiple pages.
Note: PDF files with mixed orientation and pages sizes cannot be processed with Simple Imposition.
If an attempt is made to process files of this type the following error will occur.

Navigator RIP v9: November 2011

User Manual

259

Simple Imposition

%%[ Error: while running imposition Response procedure ]%%
%%[ Error: rangecheck; OffendingCommand: HqnLayout; Info: Simple imposition requires that all pages are the
same size and orientation; File: ]%%

Note: Some EPS files containing errors will continue to output if the Add Showpage at end of job if necessary and Crop marks page feature options are turned on. If either of these options are turned off then
an error will occur on input.

10.3 How to activate Simple imposition
To make use of the standard Simple imposition setups you do not need a password. However, if you
would like to create new and copy and edit existing setups, you must enter a valid password in the
Configure RIP > Extras dialog. For more information on how to activate a password protected option
see Extras on page 185.

10.4 The Imposition Manager
The Imposition Manager allows you to select, create, edit, copy and delete imposition
schemes. To display the Imposition Manager, click the Imposition Manager icon from the
toolbar or the Page Setup dialog, or select Output > Imposition Manager.

Figure 10.1 The Imposition Manager dialog box

Note: The Imposition Manager dialog contains listings when it first appears. The setups within brackets are those supplied as standard. These setups are derived from Page features used in pre v7.0
Release RIPs, and have names that reflect their intended use. These options cannot be copied and
changed or new setups created unless you have activated Simple Imposition with a password. Imposition schemes are selected from the Page Setup dialog.
Please note that the imposition setups provided as standard cannot be edited. You may however, use
the Copy option to create a duplicate setup which you can then change to suit your requirements.
The following options are available from the Imposition Manager dialog box:
Before creating any imposition setups you should choose your preferred
units. All imposition setups use the same units, and any existing imposition
setups will convert any values to the currently selected units.

Units

260

User Manual

Navigator RIP v9: November 2011

10.5

Configuring Simple imposition

Edit

Select an existing imposition setup and click Edit to change the imposition
settings. When you have finished editing the setup, click OK to save your
changes. Please note that the supplied imposition schemes cannot be edited,
they can however be copied to a new name and then edited.

New

Click New to create a new imposition setup. In the Imposition setup dialog
choose your imposition options and then click Save as. Enter a unique name
for your setup followed by selecting Save.

Copy

This option allows you to copy an existing setup or use an existing setup as
the base for a new setup. Select an existing imposition setup and click Copy.
In the Imposition Setup dialog make any changes to the setup and then click
Save as. Enter a new name followed by clicking Save.

Delete

Select an existing setup and click Delete to remove it from the Imposition
Manager. If a Page Setup is using an imposition setup that is selected for
deletion, it will not be removed, and a message will appear stating this. To
remove an imposition setup the setup must not be used by any Page Setup.

Select

If you have accessed the Imposition Manager from the Edit Page Setup dialog you can highlight one of the existing Imposition setups, and click Select.
This will apply the selected imposition to the current Page Setup configuration.

10.5 Configuring Simple imposition
This section describes how to use Simple imposition. Before choosing your imposition scheme you
should consider:


The binding method. The common options are:











Perfect binding as used for most books. The pages are collated then cut and glued together
with a spine.
Saddle-Stitching as used for newspapers and magazines. The pages are stapled together
along the center-fold. (The front page is printed next to the back page.)
Cut and stack. The printed pages are trimmed to the correct size, collated and then bound.

The size of the printing surface (raster).
Whether the reverse side of the surface can be printed, and how the page is turned on the printing device.
How the job is folded or cut.
Simple imposition acts on the Page Setup > PDF Options > Page size bounding box option, see PDF
Options dialog box on page 225 for more information. Therefore, before configuring your
Simple imposition scheme you should consider how the incoming PDF is constructed in terms
of its trim box, bleed box and so on. For example, you can configure the Page Setup to use
TrimBox, and then configure Simple imposition to add bleed from outside the trim. Setting the

Navigator RIP v9: November 2011

User Manual

261

Simple Imposition

correct Page size bounding box is essential to the successful imposition of PDF files. The recommendation when using Simple imposition is to set the Page size bounding box option to TrimBox because the size of the page is as it is intended for delivery to the reader, after trimming
any printers marks and excess bleed areas. With this selection you can add your trim marks and
page furniture using the Simple imposition options.
The New/Edit Imposition setup dialog is used to configure the imposition setups. You can access this
dialog through the Imposition Manager.

Figure 10.2 Simple imposition setup dialog

Note: The imposition setup graphic shown above is displayed as it first appears.
The following sections describe the various options within the imposition setup dialog.

10.5.1 Schemes
Choosing the correct scheme is important as its selection determines which of the other options in the
imposition setup dialog are available. The following imposition schemes are available:
Scheme Name

Description

One-up, single-sided

Single-sided, one page per surface.

One-up, two-sided

Two-sided, one page per surface.

Table 10.2 Simple imposition schemes

262

User Manual

Navigator RIP v9: November 2011

10.5

Configuring Simple imposition

Scheme Name

Description

N-up, single-sided

Each surface of this single-sided layout contains a grid of
pages, all at the same orientation. This can be used for laser
printer N-up printing, and for media saving. The number of
pages in the grid can be set manually, or can be calculated
automatically for best fit.
In conventional print, it can also be used for two-sided printing
using either Work & Turn or Work & Tumble (depending on
plate orientation in the press) for two-up surfaces that will be
cut to produce single-surface, unbound jobs.

N-up, two-sided

Each surface of this double-sided layout contains a grid of
pages. It is intended mainly for laser printing, and for the
media saving of unbound jobs in conventional printing.
Note that neither of the N-up schemes provide support for generalized conventional imposition; they all take pages in reader
order from the supplied content file, rather than taking pages
out-of order as is required for perfect binding, etc.

Step and repeat, single-sided

Single-sided, multiple copies of the same page are imposed in
a grid.

Step and repeat, two-sided

Two-sided, multiple copies of the same page are imposed in a
grid. This differs from the single-sided variant principally in
allowing different surface margins, slug lines, and so on, or the
front and back of the surface.

Two-up, saddle-stitched

Two-up Saddle-stitched production. Surfaces are gathered after
printing, then folded and trimmed to produce booklets. The
binding side is defined by the setting of Binding edge parameter.

Step and repeat, saddle-stitched

Step and repeat of Saddle-stitched page pairs. This option
places one or more identical copies of each booklet side-byside on the surfaces. The surfaces are cut before gathering,
then folded and trimmed to produce booklets. The binding side
is defined by the setting of the Binding edge parameter.

Cut and stack, single-sided

Single-sided, multi-up imposition for jobs that will be bound
with wire, comb binders and so on, and therefore will be
trimmed to single pages. Once printed and stacked, each set of
surfaces will be cut, and stacked on top of the other to give a
full set of pages in order.

Cut and stack, two-sided

As Cut and stack, single-sided, but for two-sided work.
For an example see Cut and stack, two-sided‚ 12 page booklet,
A4, ring bound on page 277.

Four-up, saddle-stitched

Saddle-stitched, four-up printing which is folded once before
gathering and stitching. The Binding edge, Spine fold and
Geometry options define the layout on the surface.

Four-up, perfect binding

Four-up printing for perfect binding. The Binding edge, Spine
fold and Geometry options define the layout on the surface.

Table 10.2 Simple imposition schemes

Navigator RIP v9: November 2011

User Manual

263

Simple Imposition

10.5.2 Previously supplied schemes
Some of the schemes present in the Genesis Release v7.0 were changed for v7.1. If you migrate the
imposition setups from v7.0 to v7.1 they will work correctly. The following table shows the relationship between the deprecated Genesis Release v7.0 schemes and the schemes present in the Genesis
v7.1 Release:
Old 
Scheme

New 
Scheme

BindingEdge

Spine- HorGut- VertGutter
Fold
ter

Pages- PagesUp
Across

SaddleStitch_
Left_1

SaddleStitch_2

Left

Auto

GutterB

GutterA

0

0

SaddleStitch_
Right_1

SaddleStitch_2

Right

Auto

GutterB

GutterA

0

0

SaddleStitch_
TopA_1

SaddleStitch_2

TopA

Auto

GutterB

GutterA

0

0

SaddleStitch_
TopB_1

SaddleStitch_2

TopB

Auto

GutterB

GutterA

0

0

SaddleStitch_
TopC_1

SaddleStitch_2

TopC

Auto

GutterB

GutterA

0

0

SaddleStitch_2x
_Left_1

SaddleStitch_
S&R_1

Left

Auto

GutterA

GutterB

1

2

SaddleStitch_2x
_Right_1

SaddleStitch_
S&R_1

Right

Auto

GutterA

GutterB

1

2

SaddleStitch_2x
_TopA_1

SaddleStitch_
S&R_1

TopA

Auto

GutterA

GutterB

1

2

SaddleStitch_2x
_TopB_1

SaddleStitch_
S&R_1

TopB

Auto

GutterA

GutterB

1

2

SaddleStitch_2x
_TopC_1

SaddleStitch_
S&R_1

TopC

Auto

GutterA

GutterB

1

2

Table 10.1 Migration of deprecated Simple Imposition schemes

264

User Manual

Navigator RIP v9: November 2011

10.5

Configuring Simple imposition

10.5.2.1 Changes from 7.1 to 7.2
Note: Migrate will set PageRotate to Rot0 for all bound schemes.
Warning: A bound work setup with page rotation set to anything but 0 (zero) migrated to 7.2 will
change the output. All PDF files should have their orientation set correctly.

10.5.3 Surface
The Surface options define the size of the raster to be created, that is, the maximum size, outside of
which nothing will be printed. The following options are available:
The size options are:

Size

From media: (the default option) where the size of the output is taken from the
size of the media loaded. This of course depends on the device and type of
media. See the Table 10.3 below for more details.
From job: where the size of the output is taken from the size of the incoming

job (plus any margins).
Custom: where the size of the output is defined in the Width and Height fields.

Note: All imposition schemes are constructed on the assumption that the
image width > height. If the image height > width, the whole layout is
rotated. Thus, if the sheet is rotated, the layout design is calculated as if it had
been rotated, which is then applied to the media at 90 degrees to what you
might otherwise have expected. For one-up layouts the only effect is that the
page is rotated by 90 degrees in such cases. This may not be visible if BestFit
is selected for the page rotation.
Device

Width

Height

Capstan (including
roll-fed proofers)

When there is a media selection
on the Page Setup Layout dialog,
the width is taken from that, otherwise it is taken from the cassette
width.

Height is taken from the job. For
N-Up and Step & Repeat with
automatic page counts, only one
row will ever be produced.

Drum

As Sheet (below)

As Sheet (below)

Partial drum

Width is taken from the job. For
N-Up and Step & Repeat with
automatic page counts, only one
column will ever be produced.

The height is taken from the cassette width.

Sheet

When there is a media selection
on the Page Layout dialog, the
width is taken from that, otherwise it is taken from the default
Page size option on the Page
Layout dialog.

When there is a media selection
on the Page Layout dialog, the
height is taken from that, otherwise it is taken from the default
Page size option on the Page
Layout dialog.

Unlimited devices
including TIFF

Width is taken from the default
Page size option on the Page
Layout dialog.

Height is taken from the default
Page size option on the Page
Layout dialog.

Table 10.3 Width and height definition when using From Media option

Navigator RIP v9: November 2011

User Manual

265

Simple Imposition

Flip on

This option is only available with two-sided imposition schemes, and allows
the surface to be flipped on either its Long edge or Short edge.
When used for conventional printing, select the option that matches how the
paper lifts are turned for the second side to be printed, or how each sheet is
turned automatically in a perfecting press. When used for driving a digital
printer, select the option that matches the duplex capability of the printer for
the paper size to be used.

The selection of Long edge is where the first surface is printed, and the media is
then flipped from top to bottom. The top and bottom are switched, and the right
and left edges remain in the same position for both surfaces.

The selection of Short edge is where the first surface is printed, and the media is
then turned from side to side. The right and left edges are switched, and the top
and bottom remain in the same position for both surfaces.
Simple Imposition can get the page size from the Media, the Custom layout or
from the Job. All Simple Imposition schemes are constructed on the assumption
that the image width > height (landscape). If the image height > width (portrait),
the whole layout is rotated and the top of the page is effectively at the right-hand side.
In normal circumstances when making plates the page size would be set as Custom or to come from
the media.If however the page size is set to come from the job, a portrait page is configured such that
the top of the page is actually at the top. This causes the Flip on long edge and Flip on short edge options
to behave in the opposite way to how you would expect. Flip on long edge causes the page to flip
top/bottom (in effect on the short edge), and Flip on short edge causes the page to flip Left/Right (in
effect on the long edge).

10.5.3.1 Work & Turn, Work & Tumble, and Perfecting
Work & Turn, Work & Tumble, and Perfecting are common imposition schemes.
A Work & Turn imposition scheme uses a single plate to print on both sides of the paper. When the
first side of the sheet is printed, the paper is then flipped over from side-to-side and fed through the
press again using the same gripper edge. The top and bottom remains in the same position for both
sides, that is the top of the first side remains as the is the top for the second side.
A Work & Tumble imposition scheme again uses a single plate to print on both sides of the paper
using opposite grippers. When the first side of the sheet is printed the leading edge is gripped. The
paper is then tumbled, that is, the top of the first side becomes the bottom of the second side and the
trailing edge of the paper is gripped. The left and right edges of the sheet remain in the same position
for both sides.
Perfecting is when you can print on both sides of the sheet in one pass through the machine.
These imposition schemes can be achieved using Simple imposition. It does however depend on
which edge of the sheet is fed into your printer.

266

User Manual

Navigator RIP v9: November 2011

10.5

Configuring Simple imposition

If your press is fed with the short edge first and you have Long edge configured as the Flip on setting,
you are in effect, using a Work & Turn scheme.
If your press is fed with the short edge first and you have Short edge configured as the Flip on setting,
you are in effect, using a Work & Tumble scheme. This method can be utilized for a Perfecting press
configuration.
If your press is fed with the long edge first and you have Short edge configured as the Flip on setting,
you are in effect, using a Work & Turn scheme.
If your press is fed with the long edge first and you have Long edge configured as the Flip on setting,
you are in effect, using a Work & Tumble layout. This method can be utilized for a Perfecting press
configuration.

10.5.4 Pages
These options define the settings that affect individual pages within a layout. The following options
are available:
Layout of pages

N-up, Step and repeat, and Cut and stack page schemes can use an Automatic
or Custom layout of pages. When Automatic is selected the number of pages
on a surface is calculated automatically.
You can specify the number of pages on each surface using the Custom
option. You define the number of page columns by entering a value in the
Across field. You define the number of page rows by entering a value in the
Up field.
To define the order in which pages fill the layout use the Page fill order
option, see Front and back options on page 271 for more information.

Rotate

The rotate options define whether pages within a layout can be rotated. The
Best Fit option will rotate pages as needed (for Nup, StepRepeat, Cut & Stack
only) so that they fit the layout.
Note: Best Fit will be treated as 0 if Width = 1.
This option defines how individual pages are rotated within the page grid.
The 0 to 270 options rotate the individual pages by the elected amount.
0 as in the supplied job.
90 is rotated 90 degrees.
180 is rotated 180 degrees.
270 is rotated 270 degrees.

By selecting Landscape all pages will be rotated by 0 degrees unless the pages
are supplied as portrait in which case the pages will be rotated by 90 degrees.
By selecting Portrait all pages will be rotated by 0 degrees unless the pages
are supplied as landscape in which case the pages will be rotated by 90
degrees.

Navigator RIP v9: November 2011

User Manual

267

Simple Imposition

The whole grid (and its accompanying annotations) can be rotated using the
Rotate options from the Page Setup dialog.
Note that PageRotate is ignored for bound-work schemes, and the final page
rotation is defined by the spine direction, binding edge and geometry.
Page flip

How the front and back of each page within the sheet are turned relative to
each other.
If Left/Right the final trimmed page should be flipped left to right to move
from the front to the back.
If Top/Bottom the final trimmed page should be flipped top to bottom to move
from the front to the back.
Schemes: OneUp_2s_1, NUp_2s_1, StepRepeat_2s_1, CutStack_2s_1.

Max bleed

The value in this field is added to the overall page size.
The value entered here will not affect page positioning in any way, but if
there is any graphical content on the page that extends off the page, this much
of it will be printed.
If the bleed value extends more than halfway across a gutter, the content is
trimmed at the gutter centre.

If pages don’t fit

If the group of pages do not fit within the surface size, you have the following
options:
Abort job will abort the job and issue a warning message.
Crop will crop one or more edges of the raster. The Page Grid positioning

options (see Page Grid positioning on page 272 for more information), decide
the alignment of the page grid within the available space, and therefore the
edges that are cropped.
The various Trim options crop one or more edges of the raster. The edges to
be trimmed are manually selected.
The Scale to fit option will scale the pages and all associated gutters and crop
marks. This option is intended for use when proofing and digital printing and
would not generally be used when imaging plates.
Tile allows the same page grid to be imaged over several rasters, each with
different offsets so that the rasters may used together to create the entire
image.
Note: The Tile option cannot be used with PostScript language files. Also, the
use of the Tile option with the Layout of pages option set with Up and Across
equal to zero, with multiple page, Step and repeat and Cut and stack schemes
will only ever produce one tile unless a single page will not fit in the image
size available.
Page padding

268

User Manual

This option decides what to do if the number of pages in the job do not divide
exactly by the number of pages required to fill a sheet. The options are:

Navigator RIP v9: November 2011

10.5

Configuring Simple imposition

Abort job if pages don’t fill surfaces which will cause a warning to be issued and

no output will be produced.
Add blank pages after last page and Add blank pages before last page which will

add blank pages as specified.
Add blank pages before cover which will add blank pages before the next to last

page (that is, before the back cover of a two-sided job).
The affect of the Split before end option, available for two-sided Cut and stack
schemes, depends on the number of blank pages. If one blank page, the result
will be the same as Add blank pages before the last page. If two blank pages the
result will be the same as Add blank pages after the last page. If three blank
pages, one blank page will be added before the last page, and two after it.
The Split before cover option is only available for two-sided Cut and stack
schemes. This will be the same as Add blank pages before the last page, but will
insert pages before the last-but-one page as necessary.
These options lead to a booklet containing an even number of pages, with the
last page of the content files on the outside of the back cover, and then a number of blank sheets behind the booklet after cutting and stacking.

10.5.5 Binding
The Binding options determine how the booklet is bound and folded.
Binding edge

For saddle-stitched and perfect binding schemes these options decide the
binding edge.
Left bound is used for booklets bound on the left, the most common form for

Latin text.
Right bound, suitable for use with right-to-left scripts such as Arabic and

Hebrew. This scheme is also appropriate for use with Japanese text (even
though that is not written right to left).
Top bound A is designed for use in items such as calendars, which are hung

open so you can see two pages at a time.
Top bound B is designed for use in items that will be hung (if a calendar)
closed by the binding edge, and where page 2 is on the reverse of page 1.
Top bound C is designed for use in items that will be hung (if a calendar) by
the binding edge, and where page 2 is on the front of the second surface.
Spine fold

For saddle-stitched and perfect binding schemes these options decide the
direction of the fold that will become the spine. This is the fold with any
creep applied.
Vertical is used for portrait (tall) pages.
Horizontal, is used for landscape (wide) pages
Automatic, select between the vertical or horizontal options based on the Page

size, available space, Binding edge and Geometry.

Navigator RIP v9: November 2011

User Manual

269

Simple Imposition

This option is automatically set to None for normal flatwork. so that any
applied gutters work correctly.
Geometry

For four-up, saddle-stitched and perfect binding schemes these options
decide if the gutter (other than the Spine fold) is head-to-head or foot-to-foot.
These options change the orientation of the pages on the surface.
Head to head places the tops of the page pairs together
Foot to foot, places the foot of the page pairs together.
Left to right, place the left and right sides of the page pairs together.
Right to left, places the right and left sides of the page pairs together.
Automatic, either head to head or left to right is automatically selected

depending on the aspect ratios of the pages and the available raster. This
option can only be used if Automatic is selected n the Spine fold field.
Work and T

For all two-sided schemes, these options allow you to select a Work & Turn
or Work & Tumble layout.
None, no Work & Turn or Work & Tumble.
Left to right/Right to left, are available when Short edge is selected in the Flip on

option and is used with Work & Turn schemes, with the paper turning either
way.
Top to bottom/Bottom to Top, are available when Long edge is selected in the
Flip on option and is used with Work & Tumble schemes, with the paper tum-

bling either way.
Gutter

This is the amount of space between the two sides of the layout produced
when Work and t is set to something other than None.

Min

This is the minimum gutter value between the two sides of the layout produced when Work and t is set to something other than None, which is the most
common configuration.

10.5.6 Gutters
The gutter is the space between pages on a layout. The options in this section define the size of the
gutter. The following options are available:
Vertical gutter/Horizontal gutter

The value in these option define the optimum horizontal and vertical gutter. If
there is sufficient space within the layout these values are used. If there is not
enough space, the gutter is size reduced as necessary, but to a value not less
than the value specified in the Minimum field.
Note: The vertical gutter runs vertically, from top to bottom.

270

User Manual

Navigator RIP v9: November 2011

10.5

Configuring Simple imposition

Creep

Creep occurs on saddle-stitched and perfecting bindings where the inside
pages extend beyond the image area of the outside pages. This option compensates for this effect, and specifies the amount to be removed from the gutter (often called shingling).

Creep Style

The following Creep Styles are available:
Push out: means that the inner-most surface uses the set gutter value, and

every outside surface has a larger gutter increased by the Creep value, each
page is pushed the amount of creep away from the centre line.
Pull in: means that the outside surface has the set gutter value, and each inside

surface has a gutter size decreasing by the Creep value, each page is pulled in
by the amount of creep towards the centre line, until the minimum gutter size
is reached, at which point the gutter will stay at the minimum size for all
remaining surfaces.
Center line: means that the middle surface in the stack has the set gutter value,
those inside it will have smaller gutters and those outside it will have larger
gutters.

10.5.7 Front and back options
These options define the way in which the layouts are filled with pages, and allow the specification of
various page furniture items such as annotations, registration marks and crop marks. For two sided
schemes you have the option to define the front pages, and then, by leaving the Use front options for
back option selected, you can use those same values for the back pages. Alternatively, you can deselect the Use front options for back option and define the back pages separately.
If you wish, you may change the current units used by imposition. Changing this option will convert
all existing values in this and any other imposition setups.
On selection of either Front options or Back options the following dialog will appear:

Navigator RIP v9: November 2011

User Manual

271

Simple Imposition

Note: The left, right, top and bottom are all relative to the design orientation of the imposition scheme,
which assume that the image width is greater that the image height. If this is not the case, or if the surface has been rotated using the Page Setup Rotate option, the orientation is likely to be affected.

Figure 10.3 Front and Back imposition options
Page fill order

The page fill order options define how pages will fill the layout, and are all
described such that the first half of the name describes the ‚fast scan axis and
direction, and the second half describes the slow scan axis and direction.
Please note that the example graphic shows how a 2 x 2 layout would be
numbered.

10.5.7.1 Page Grid positioning
The top, bottom, left and right options define the size of the borders into which control strips and/or
slug lines will be placed. The margins must therefore be large enough to accommodate the selected
items. Do not confuse the Spacing for marks with the margins specified in the Page Layout dialog
which may be used to position the raster produced by the RIP on the printing plate or output media.
Note: Crop marks and bleed will extend into the margins defined in simple imposition, and will be
clipped if insufficient margin is defined. Margins will also not automatically increase if too large a set
of annotations is defined on any edge.

272

User Manual

Navigator RIP v9: November 2011

10.5

Configuring Simple imposition

Position page grid horizontally

The page grid is horizontally positioned within the area of the raster after Left
and Right are accounted for according to this value. Note that the graphic on
the user interface indicates the currently selected position.
The options are Left, Center, Right.
Position page grid vertically

The page grid is vertically positioned within the area of the raster after Top
and Bottom are accounted for according to this value. Note that the graphic
on the user interface indicates the currently selected position.
The options are Top, Center, Bottom.
If annotations and crop marks do not fit in margins

From v7.1 crop marks and bleed extend into the margins defined within simple imposition. By default, the margins will not grow automatically if too
large a set of annotations is defined on any edge; they will be clipped. This
can be changed using this option. The available options are:
Clip annotations and crops: which is the default value.
Enlarge margins: enlarges the margins to accommodate the annotations.
Abort job: abort the job if the annotations do not fit.

10.5.7.2 Marks
These options allow you to define which marks you want placed onto your imposition layout.
Crop Marks

You can make a selection from the various crop marks provided. Crop marks
are drawn around every page on the layout.
None: no crop marks are used.
Small: small trim marks are placed on the layout.
Full: large trim marks, separation names, step wedges and color bars are

placed on the layout.
PDF page boxes: trim marks are placed to show the locations of all PDF pages
boxes. For file formats other than PDF this option is the same as Small.
Registration Marks 

Select the required option to place registration marks on the selected surface:
None: no registration marks are placed on the layout.
Desired: registration marks are placed on the layout if space is available. If

space is not available a warning is generated.
Required: registration marks are placed on the layout. If space for those marks

is not available the job is aborted.

Navigator RIP v9: November 2011

User Manual

273

Simple Imposition

Fold and/or cut marks

Select this option to place fold or cut marks in all the appropriate gutters on
the layout.
Page border

Select this option to draw a page border around every page on the selected
surface.

10.5.7.3 Annotations
The Annotations section of the imposition dialog allows you to add slug line text, color bars and
proofing strips. You can, using this option, add just about anything extra you wish to your imposition
layout.
If required custom annotation files can be used. This is done by using the Install Annotation page feature which, when activated via the Page Setup dialog, allows you to print an EPS file (EPS only), to
install that file as a new annotation.
Annotation selections draw the following marks:
PlateBar_ISO12647-2_1, PlateBar_SWOP_1
Both draw a more or less standard press color bar, with 25, 50, 75% tints and
solids of all the separations rendered, together with trapping patches, slug
patches, registration test patches and neutrals. These do not include any slug
text. The difference between the two is in the neutral patches; one follows the
recommendations from the ISO 12647-2 standard, the other from SWOP.
PlateBar_small_1 
This draws a secondary press color bar, with smaller patches in order to avoid
wasting space; the patches in this bar are not designed to be large enough for
measurement using densitometers. Patches include shadow and highlight
ramps.
PlateText

Writes a slug line, including job name, time and date of interpretation, file
time and date (if available), submitter's name (if available) and details of the
Page Setup selected.

ProofStrip_1, ProofStrip_2,ProofStrip_4
All draw a combination of color bar and slug text designed to be suitable for
proofing. In addition to flat color tints, graduations and neutrals, some
patches setting out job meta-data such as PDF/X compliance are included.
The three selections differ in the number of rows of color patches included,
and therefore the amount of space that they take up.
Spacer_18pt, Spacer_6pt
These do not draw any marks, but may be used to position the other annotations, for example, by moving them away from the edge of the sheet.

274

User Manual

Navigator RIP v9: November 2011

10.5

PlateBar_G7_1

Configuring Simple imposition

This option prints a G7 color bar on the output and provides support for the
use of Gracol G7 print characterization data.

To install your own custom annotation:
1. Create a Page Setup (not using Simple Imposition) and select the Install Annotation page feature.
For more information on using page features see Features on page 133.
2. Print the Annotation (EPS) file using this Page Setup. A message will appear indicating that the
annotation is being installed.
3. Go back to the Page Setup using Simple Imposition. You can now select and use the custom
Annotation in your Simple Imposition setup. See below for information on how to add an annotation to the imposition layout.
When used as an annotation the EPS file will be repeated along the length of the selected raster edge
as many times as it will fit.
Note: If the custom annotation does not fit, there will be no error message.
To add an annotation to the imposition layout:
1. Click New.
Note: An annotation will appear in the list. Do not attempt to delete this. Go straight to step 2.
2. Select your required annotation file from the Edit selected row drop-down list. For example,
select PlateText to add slug line information.
3. Select where on the layout you want to add the annotation by choosing either, Top, Bottom, Left
or Right from the Edit selected row drop-down list.
4. Click New to add further annotations. You can add as many annotation files as you wish, but you
must ensure your layout has enough room to accommodate them.
The annotations are printed in the order in which they appear in the list, and you can change that order
by dragging and dropping them. If two annotations are placed on the same edge of the layout, the first
one will be on the edge of the layout, and the second will be moved inwards by the size of the first.
Similarly, if an annotation has already been drawn on the left of the layout, a second annotation on the
bottom edge will leave room at one end for the first annotation.
You can edit the any annotation in the list by selecting it and then choosing the required options from
the Edit selected row drop-down menus.
You can remove any annotation file from the list by selecting and clicking the Delete button.
When you have completed the front and back options select OK to save them. Selecting Cancel will
abort any change you have made. Similarly, when you have completed all your imposition configuration options select OK to save your changes.

Navigator RIP v9: November 2011

User Manual

275

Simple Imposition

10.6 Example impositions
This section provides same example impositions showing how the pages for each surface are laid out
along with the final results.

10.6.1 Saddle-stitched‚ 16 page booklet
The plates for this imposition will be laid out in the following fashion:
Front surface

3

12

5

10

6

11

4

14

9

1

7

8

13

2

16

15

Back surface

Figure 10.4 Saddle-stitched, left bound layout

This extra settings for this imposition scheme are:
Scheme

Two up, saddle stitched

Flip on

Long edge

Binding edge

Left bound

Spine fold

Vertical

The resulting saddle-stitched booklet will look like this:

9
11

13

15

1

7
5

3
Red numbers denote unsighted pages

Figure 10.5 Saddle-stitched, left bound result

276

User Manual

Navigator RIP v9: November 2011

10.6

Example impositions

10.6.2 Cut and stack, two-sided‚ 12 page booklet, A4, ring bound
The plates for this imposition will be laid out in the following fashion:

3

9

5

10

4

8

Back
Surface

7

11

6

1

12

Front
Surface

2

Figure 10.6 Cut and stack, two-sided layout

This extra settings for this imposition scheme are:
Scheme

Cut and stack, two sided

Flip on

Long edge.

The resulting sheets before cutting and the stack after cutting are shown below:
Sheets before cutting

2

1
4

8

Pages after stacking

2

7
3 10

1
4

9

3
5

6
6

5 12

11

7

8
10

Blue numbers denote the reverse side

9
12

11

Figure 10.7 Cut and stack, two-sided sheets and stack

The final pages are suitable for hole punching and then ring or wire binding.

Navigator RIP v9: November 2011

User Manual

277

Simple Imposition

10.6.3 Saddle-stitched‚ 8 page booklet A5 on B4

7
2
5

3

4

6

3

2

1

6

5

8

1

Front surface

4

8

7

The plates for this imposition will be laid out in the following fashion.

Back surface

Figure 10.8 Saddle-stitched, x2 left bound layout

This extra settings for this imposition scheme are:
Scheme

Step and repeat, saddle stitched

Flip on

Short edge

Binding edge

Left bound

Spine fold

Horizontal

The two resulting saddle-stitched booklets will look like this:

5

7

1

3

5

7

3

1

Red numbers denote unsighted pages

Figure 10.9 Saddle-stitched, x2 left bound result

278

User Manual

Navigator RIP v9: November 2011

10.6

Example impositions

10.6.4 Saddle-stitched, Top bound A, 8 page booklet

8

3

6

7

4

5

Back
surface

1

Front
surface

2

The pages for this imposition will be laid out in the following fashion:

Figure 10.10 Saddle-stitched, Top bound A layout

Note: Page 8 is a special case.
This extra settings for this imposition scheme are:
Scheme

Two up, saddle stitched

Flip on

Long edge

Binding edge

Top bound A

Spine fold

Vertical

The resulting saddle-stitched booklet will look like this:

1

7
4

5
5

3

2

7

Red numbers denote unsighted pages

Figure 10.11 Saddle-stitched, Top bound A result

Navigator RIP v9: November 2011

User Manual

279

Simple Imposition

10.6.5 Saddle-stitched, Top bound B, 8 page booklet

1

3

5

4

7

Back
surface

6

8

Front
surface

2

The pages for this imposition will be laid out in the following fashion:

Figure 10.12 Saddle-stitched, Top bound B layout

This extra settings for this imposition scheme are:
Scheme

Two up, saddle stitched

Flip on

Long edge

Binding edge

Top bound B

Spine fold

Vertical

The resulting saddle-stitched booklet will look like this:

7
4
5

3

5

2

1

7

Red numbers denote unsighted pages

Figure 10.13 Saddle-stitched, Top bound B result

280

User Manual

Navigator RIP v9: November 2011

10.6

Example impositions

10.6.6 Saddle-stitched, Top bound C, 12 page calendar

6
5
4

2
3

10

9

11

8

Front surface

12

7

1

The pages for this imposition will be laid out in the following fashion:

Back surface

Figure 10.14 Saddle-stitched, Top bound C layout

This extra settings for this imposition scheme are:
Scheme

Two up, saddle stitched

Flip on

Short edge

Binding edge

Top bound C

Spine fold

Vertical

Navigator RIP v9: November 2011

User Manual

281

Simple Imposition

The resulting saddle-stitched calendar will look like this:
12
11
10

6

1

4

5

6

5

2

3

4

Figure 10.15 Saddle-stitched, Top bound C result

282

User Manual

Navigator RIP v9: November 2011

10.6

Example impositions

10.6.7 Four-up, Saddle-stitched‚ 16 page A4 booklet on B2/SRA2

Front surface

14
7
10

11

9

6

8

5

16

15

13

12

3

2

4

1

The plates for this imposition will be laid out in the following fashion.

Back surface

Figure 10.16 Four-up, Saddle-stitched, 16 page A4 booklet

This extra settings for this imposition scheme are:
Scheme

Four-up, saddle stitched

Flip on

Short edge

Geometry

Head to head

Binding edge

Left bound

Spine fold

Horizontal

The resulting 16 page saddle-stitched booklets will look like this:

13

15

1

9

11

3

7

5

Red numbers denote unsighted pages

Figure 10.17 Saddle-stitched, 16 page A4 booklet result

Navigator RIP v9: November 2011

User Manual

283

Simple Imposition

10.6.8 Four-up, Perfect-bound‚ 16 page A4 booklet on B2/SRA2

3
6
11
14

8
9

15

13

10

12

16

7

5

Front surface

2

4

1

The plates for this imposition will be laid out in the following fashion.

Back surface

Figure 10.18 Four-up, Perfect-bound, 16 page A4 booklet

This extra settings for this imposition scheme are:

284

Scheme

Four-up, perfect binding

Flip on

Short edge

Geometry

Head to head

Binding edge

Left bound

Spine fold

Horizontal

User Manual

Navigator RIP v9: November 2011

10.6

Example impositions

The resulting 16 page perfect-bound booklets will look like this:

13

15

11

9
5

7

1

3

Red numbers denote unsighted pages

Figure 10.19 Perfect-bound, 16 page A4 booklet result

Navigator RIP v9: November 2011

User Manual

285

Simple Imposition

286

User Manual

Navigator RIP v9: November 2011

11
Fonts
Whenever the RIP processes a job that uses fonts, they must be available in memory. Fonts are loaded
into the RIP from the disk automatically whenever they are required. However, the fonts must have
been installed first, or they must be embedded in the job that uses them. Installation is a once-only
process where the RIP configures the font for its use and puts it in the appropriate place. This chapter
discusses how fonts are installed and then used by the Navigator RIP.
The RIP provides a suite of facilities that let you manage fonts easily and efficiently. This suite
includes commands that will:


Install fonts in the RIP.



Tell you which fonts are currently installed.



Produce a proof of any font currently installed.



Remove fonts from the RIP.

The Navigator RIP also provides facilities for font substitution and font emulation. For more information see:


Font substitution on page 295.



Font Emulation on page 297.

11.1 Supplied fonts
The Navigator RIP comes with the 35 standard fonts found in most versions of the Apple LaserWriter
and many other PostScript language capable printers. The RIP font folder also includes several special-purpose fonts:


The Harlequin font is used only for the Harlequin RIP logo.



The NotDefFont font is used by composite fonts.

The RIP supplies the 35 standard fonts and the special-purpose fonts installed in the fonts folder in the
SW folder.

Navigator RIP version 9

User Manual

287

Fonts

11.2 Types of font
There are several different types of fonts that can be installed and used with the RIP. See Installing
fonts in the Navigator RIP on page 289 for details about installing fonts.


Type 1 fonts‚ these are the most commonly used fonts. Type 1 fonts can contain hints that can
subtly change the shape of the characters. Hinted fonts can improve the appearance of text rendered at low resolution or at small sizes on higher resolution devices: for example, hints can
affect 11 point text at resolutions up to 2000 dpi.
Note: The font downloaders supplied with many Type 1 fonts actually install Type 1 fonts as
Type 4 fonts.






Type 3 fonts.
Type 0 (composite) fonts‚ these are special fonts designed to support large character sets such
as Japanese or Chinese. Type 0 fonts can use any base font format (Types 1, 3, 4, 32, 42) and
CID fonts. Type 0 fonts can support multi-byte character encodings. Older Type 0 fonts had
multiple sub-fonts and as such used a lot of memory however, the new CID-keying method is
much more memory efficient.
Character identifier (CID) composite fonts, together with associated character map (CMap)
files are used to produce CID-keyed fonts, which exist only in the memory of the Navigator
RIP (or other RIPs).
There is not easy method of determining whether a TrueType font should be installed as a CID
font or not. If installed as a CID font, the order of characters in the font is not easily predicted.
Improvements to this are expected in future releases.




Single-byte PC format TrueType fonts or OpenType fonts with TrueType outlines.
The RIP also supports installation of native TrueType, Type 42, raw CFF (Compact Format)
and OpenType/CFF fonts. Multiple-font CFF or OpenType/CFF fonts will be installed as FontSet resources, but these will not appear in the Proof or Delete Fonts menus, or in the font List.

Note: The font resources created when installing CID fonts are CID-keyed fonts and are created automatically by the RIP. These font resources are created when CID fonts or CMaps are installed using
the Install Fonts option in the Fonts menu, and are deleted when CID fonts are removed using the
Delete Fonts option from Fonts menu. Font resources may also be created or deleted on startup, if the
available CID fonts or CMaps have changed since the last bootup.
Installing a CID font over AppleTalk with a font installer will not automatically create font resources;
the RIP must be quit and restarted to do this.
The created font resources may be deleted using the Delete Fonts option on the Fonts menu, and will
not be re-created by the RIP.
Note: The RIP supports the use of a variety of other fonts, for example, when they are embedded in
PostScript language, XPS or PDF jobs. The embedded fonts can include Compact Font Format,
Type 42, and Type 32 fonts.
Note: The font data cache is not configurable, but takes 0.5 MB for all fonts. So, for CID, native TrueType, CFF, and OpenType/CFF fonts, 1 MB extra RAM should be sufficient.

288

User Manual

Navigator RIP version 9

11.3

The DLD1 format

11.2.1 Font resource directories
The Font resource directories can be changed. The default locations are:


Font resources are installed in SW/fonts.



FontSet resources are installed in SW/FontSet.



CID fonts are installed in SW/CIDFont.



CMap files, which are placed in the SW/CMap folder.

Throughout this section these are the directories referred to when font resources are mentioned.

11.3 The DLD1 format
The Navigator RIP will convert Type 1 fonts (and Type 1 fonts contained within composite fonts) into
its own DLD1 font format.
The DLD1 format stores font data far more efficiently than do standard storage formats. Access to
font data, and operations upon fonts, are made much faster, while the amount of PostScript language
virtual memory consumed by the font is reduced dramatically.
The benefits of using the DLD1 format include: a DLD1 format font occupies less disk space; and this
format can require under 10% of the memory space of other formats. This table shows some typical
figures for the disk and memory requirements of a font in DLD1 format, and for the corresponding
font in Type 1 and Type 4 formats.
Table 11.1 Disk and memory requirements for font types
Font type

Disk space (KB)

Memory (KB)

DLD1

45

4

Type 1

100

50

Type 4

50

30

Note: It is difficult to give corresponding estimates for Type 3 fonts because they are inherently so
flexible, but they are not particularly efficient.

11.4 Installing fonts in the Navigator RIP
If a job requires a particular font, the font must already be installed in the RIP before the job is processed, unless the job itself contains the font definition. If the font is not found, the RIP will instead
print the text in a selected substitute base font (see Font substitution on page 295), or issue an error
message, depending on the setting for Abort the job if any fonts are missing in the Page Setup Options
dialog box. See Abort the job if any fonts are missing on page 138 for details.
Depending on the font type, you can install a font into the RIP in one of two ways: by using the Install
Fonts command or by downloading the font to the RIP.

Navigator RIP version 9

User Manual

289

Fonts

All fonts may be embedded, and all fonts may appear in the fonts and CIDFont resource directories.
Most font formats can be installed using the Install Fonts command, including, Types 1, 3, TrueType,
Type 42, CID Types 0, 1, 2, 4 (same as Type 32), CFF, OpenType and CMap resources.
The Install Fonts command and downloading fonts to the RIP are described in the next two sections.
See Removing fonts on page 294 for details about deleting the fonts you have installed.

11.4.1 Install Fonts command
When you choose Install Fonts from the Fonts menu, the RIP displays the Install Fonts dialog box
shown in Figure 11.1.

Figure 11.1 Install Fonts dialog box

To install a single font, do the following:
1. Select a font in the list box.
2. Click Install.
Note: PC format files with a *.pfa, *.pfb (Type 1), *.otf (OpenType), *.ttf (TrueType) extension are
visible in the upper list box. If your fonts are not in this format, select All Files from the Files of type
drop-down list.
Use the Look in drop-down list to use other directories or drives.
You can also select several fonts and install them together.


Shift


To select a block of several files, select the first file in the block, and then hold down the Shift key and
select the last file in the block.


Ctrl


To select several unconnected files, hold down the Control key while making your selection.
A successfully installed font produces the message:
Installed font ‚font_name‚ in TrueType format

290

User Manual

Navigator RIP version 9

11.4

Installing fonts in the Navigator RIP

Note: The format type will be reported in this way for single-font packages only (not FontSets). The
type reported will be TrueType, Type 42, Type 1, DLD1, Type 2, Type 3 and so on.
The Install Fonts command will install into the RIP Type 1, Type 3 and single-byte PC format TrueType fonts or OpenType fonts with TT outlines.
OpenType/CFF is supported. Single-font OTTO packages will install as a single font or CIDFont as
appropriate. Multiple-font packages will install as FontSet resources.
1

If you try to install a file that does not contain a font, or that contains a font of another type, the RIP
displays a message in the RIP Monitor. This will not harm the RIP or the file in any way the RIP just
refuses to install it.
Using the installer, TrueType fonts only install as non-CID fonts. They therefore have to be manually
moved to the CIDFont resources directory to make them appear as CID fonts.
If a font is of Type 1, it will be converted into DLD1 format before being added. This can then be
loaded into the RIP whenever necessary.
Installation is performed on a copy of the font, so your original font file remains intact.

11.4.2 Downloading fonts to the RIP
This section describes how to download fonts to the RIP.
Multiple Master fonts
Multiple Master fonts may be downloaded over AppleTalk from a Macintosh using the downloader supplied with them.



Composite fonts
Composite fonts vary greatly, and so the procedure for installation is likely to be different for
each one: there is no industry standard for this at present. Almost all composite fonts now
come with their own AppleTalk installers; however, there is still a small number that are
shipped as a collection of self-installing PostScript language files. Contact your font supplier
for more detailed information about using particular composite fonts with the RIP.



TrueType fonts
No downloader is needed for TrueType fonts. Using a downloader makes them less efficient if
converted to Type 42 format. TrueType fonts should be installed using the Install Fonts command.



CID fonts
If your CID font is supplied with a downloader, install the font and any relevant CMap file
over AppleTalk using the supplied downloader. If no downloader is supplied, use the Install
Fonts command. At present, however, CID fonts have to be manually moved to the CIDFont
resources directory to make them appear as CID fonts.



All installed fonts are placed in the fonts resources directory, except for CID fonts and CMap files,
which are placed in the CIDFont and CMap resources directories respectively.

1.

OpenType fonts containing CFF data use the tag OTTO

Navigator RIP version 9

User Manual

291

Fonts

Leaf fonts and composite fonts are sub fonts of Type 0 fonts and are installed elsewhere.

11.5 Pre-loading fonts
The Navigator RIP always pre-loads the 35 standard fonts, since one or more are likely to be used by
most jobs. If you frequently use a particular set of other fonts, you can ask the RIP to load them automatically upon start-up.
The RIP will take slightly longer to start-up, but once loaded, the fonts will be in memory when jobs
require them. This saves time when processing jobs, since the RIP does not have to stop interpreting to
wait for a font to be loaded. The time savings can be considerable‚ if a job requires a composite font,
the RIP could be waiting for a few seconds to load it. By having it pre-loaded, you will save this time
with every job that uses it.
Note: You can use this method to pre-load composite fonts, so long as they have been installed
according to the instructions in Downloading fonts to the RIP on page 291.
To pre-load a font, add a new line to the Navigator RIP initialization file, HqnOEM, and restart the RIP.
This initialization file is in the Sys folder in the SW folder.
You must add one line of PostScript language code for every font you want to load. For example, the
following lines load ZapfChancery-MediumItalic and ZapfDingbats into the RIP:
/ZapfChancery-MediumItalic HQNloadfont
/ZapfDingbats HQNloadfont

The RIP may take slightly longer to start up, but any jobs using these fonts will run considerably
faster. Pre-loading a composite font takes longer than pre-loading other types of font, but saves more
time for each job using it.

11.6 Producing a list of installed fonts
Sometimes you will need to know whether a particular font is currently installed in the RIP. You can
produce a list of all the currently installed fonts by choosing Fonts > List Fonts.
Note: The List Fonts option does not show FontSet resources.
This list will appear in two places:



The Navigator RIP window‚ this lets you see immediately whether or not fonts are installed.
The file LOGFILE in the SW folder‚ this provides a more permanent record of which fonts were
installed at a particular time.

The date and time accompanies every list.

11.7 Proofing fonts
Sometimes you may want to produce a formatted listing of all the characters in a particular font‚
known as a proof. This would normally entail writing a special PostScript language job to produce the
listing, but the RIP allows you to produce a proof of any installed font automatically.

292

User Manual

Navigator RIP version 9

11.7

Proofing fonts

Note: The RIP can proof CID fonts only in long format. Also, the RIP will not use a substitute font in
short format. If you do not choose long format, the RIP reports:
CID fonts cannot be proofed - try Proof fonts in long format.

Palatino-Italic
abcdefghijklmnopqrstuvwxyz
ABCDEFGHIJKLMNOPQR
1234567890-=!@#$%^&*()_
Figure 11.2 An example of font proofing

You can proof fonts, either on a printer or on your screen, by choosing Proof Fonts from the Fonts
menu. The RIP produces the proof using your choice of Page Setup and fits as many fonts as possible
on a page. Figure 11.2 shows an example of a short-format proof for one font.
When you choose Proof Fonts, the RIP displays a dialog box that lists all of the fonts currently
installed, as shown in Figure 11.3.

Figure 11.3 Proof Highlighted Fonts dialog box

First, choose an appropriate Page Setup for proofing the fonts, from the Page Setup drop-down list.
Note: If you forget to choose a Page Setup, the RIP uses the one that you chose last time you proofed
fonts. If you have not proofed fonts in this RIP session, the first Page Setup in the listing is used. To
change the order of this listing, see Reordering Page Setups on page 77.
Select the fonts you want to proof, and click Proof. You can select as many fonts as you like.


Shift


To select a block of several fonts, select the first font in the block, and then hold down the Shift key
and select the last font in the block.

Navigator RIP version 9

User Manual

293

Fonts



Ctrl


To select several unconnected fonts, hold down the Control key while making your selection.
The RIP constructs a PostScript language job and then runs it, as if you had used Print File to print an
existing file. If other jobs are pending, the proof takes its place in the queue.
By default, proofs only show a sample of the full character set in a font. If you want a proof of the
complete set of characters, select the Proof fonts in long format check box.
Note: CID fonts can be proofed, but only in long format. FontSet resources cannot yet be proofed.

11.8 Removing fonts
You can remove most font types using the Delete Fonts command. The two exceptions to this are composite and CID fonts.




Composite fonts
We recommend that you remove a composite (Type 0) font using the font downloader supplied
with it. This will ensure that the leaf fonts are removed. In many cases this is also the only way
to recover a font license if the license restricts you to a fixed number of installs.
CID fonts
CID fonts which you have installed using the Fonts menu Install Fonts option should be deleted
using the Fonts menu Delete Fonts option.
Note: If there is a CID font and, for example, a Type 1 font with the same name, the name is
listed twice. If you delete such a font, the RIP deletes the Type 1 font first; and then the CID
font, if you choose to delete again.

When you choose the Delete Fonts command from the Fonts menu, the RIP displays a dialog box, as
shown in Figure 11.4, where you can select the fonts to remove. As with the Install Fonts and Proof
Fonts dialog boxes, you can select as many fonts as you want.
When you click Delete, the RIP removes the fonts you have selected immediately.

294

User Manual

Navigator RIP version 9

11.9 Composite fonts (Type 0)

Warning: If you remove a font, and then need to process a job that uses it, you will first have to reinstall it. There is no confirmation dialog box. Before clicking Delete be sure that you have the original
file from which you can reinstall the font.

Figure 11.4 Delete Fonts dialog box

11.9 Composite fonts (Type 0)
The RIP provides full support for composite fonts. Because of their size, composite fonts are treated
specially. You cannot install all of them using the Install Fonts option, for example, and there are certain considerations you must make if they are to be used efficiently. See Downloading fonts to the RIP
on page 291 for information about installing composite fonts.
Composite fonts are usually very large, and can consume much computer time and memory. Whenever a character is encountered in a job, a RIP must find its definition in the composite font, and then
convert it into a bitmap, before it is printed or previewed. If a RIP does this for every character in the
job, it will be very slow.
The RIP minimizes the number of character conversions it has to do by storing the results of conversions in a RAM cache store. This means that the first time a character is seen, it is converted it into a
bitmap and stored in the cache. When that character is seen next, the RIP does not need to convert it
again because it can find the result immediately in the cache store. Significant savings in processing
time can be made using this method, especially when dealing with frequently used characters.
The RIP is able to cache more character data when more memory is available to it. We recommend
you allow extra memory in the range 16 MB through 32 MB. You will need more memory still if you
wish to cache several composite fonts. Try experimenting with memory allocation, as requirements
will depend on the fonts and types of job you have.
If you are going to use a composite font regularly, you should pre-load it into the RIP. See Pre-loading
fonts on page 292. Pre-loading makes the RIP slower to start up, but saves a great deal of time when
processing jobs that use those fonts.

11.10 Font substitution
Generally, it is preferable to use the exact font that was used in the design of the document. However,
there are times when this is not possible; a font may be corrupt; or the original font may not have been

Navigator RIP version 9

User Manual

295

Fonts

sent with the original file. In such cases the only solution is to substitute with a font that is very similar
in design to the original specified font. The customer may ask you to do this to get the job done on
time.
If substitution were not available, the RIP would do one of two things: error and refuse to produce the
job or substitute a default font, depending on the setting of the Abort job if any fonts are missing option,
see Abort the job if any fonts are missing on page 138. Either result may be unacceptable.
One solution is to open up all the pages in the original application program and search and replace
every occurrence of the problem font. This is not ideal as it is time consuming; you may not have the
original application and if you miss one or two occurrences where the font was used, the processing
time would be wasted.
Having the RIP do the substitution for you on the fly is the best solution because all occurrences of a
font are guaranteed to be substituted.
In the RIP, the file SW/Config/FontSubstitution is automatically run as the RIP boots. You can configure
the following information in that file:


Default font to use.



Default CID font to use.



Font substitution table.



CID Font substitution table.

In all cases the FontSubstitution file has many comments and is intended to be self-documenting.
A font substitution mechanism has been added which is similar (and in addition), to the existing font
substitution mechanism (defined by entries in the SW/Config/FontSubstitution file).
Whereas the existing substitution mechanism is unconditional, the new mechanism only attempts a
substitution if the initially given font name cannot be found. However, if a conditional substitution is
made, a message is displayed on the monitor indicating the substitution:
Warning: font <-name-> not found, using <-name-> instead

For example:
Warning: font Arial not found, using ArialMT instead.

You can silence this message by uncommenting the line in SW/Config/FontSubstitution which specifies
the /SilentCondFontSub key.
For more information see the Conditional Font Substitution section in the SW/Config/FontSubstitution
text file.

11.11 The HqnFontSetStubs start up files
The Sys/ExtraStart/10HqnFontSetStubs and Sys/ExtraStart/20HqnCIDFontStubs files are run by the RIP at
startup and perform the following functions:

296

User Manual

Navigator RIP version 9

11.12

Font backup

Sys/ExtraStart/10HqnFontSetStubs

Generates stub fonts for FontSet resources. The stub fonts will be installed on
the %fontset% pseudo-device.
Sys/ExtraStart/20HqnCIDFontStub

Generates the CID-keyed resources for newly-installed, and previously undetected CID fonts and CMaps.
Either of these files may be removed if the functionality is not required. The numeric prefix to their
names is to force a particular running order; FontSet stubs should be created before CID font stubs,
because FontSet stub files may be CID fonts. The files in Sys/ExtraStart are run in alpha/numeric order.

11.12 Font backup
The font backup utility allows you to easily transfer fonts from your existing RIP to a newly installed
RIP.
To use font backup, select a default Page Setup and RIP the file:
SW\Utilities\BackupFonts.ps

This creates a file which effectively contains backups of font files, (and some other files) from the SW
folder.
A message appears in the monitor window informing you of the name of the PostScript language file
created.
When you have installed your new RIP, you should run this PostScript language file to install those
font files on your new RIP.

11.13 Font Emulation
When fonts requested by the job are unavailable to the RIP, some work flows benefit significantly
from being able to produce acceptable, readable copy using another font. This is particularly true with
rapid turnaround work flows typical of digital printing. To achieve this, emulated fonts are used to
produce suitable facsimile text based on the characteristics of the font that is being emulated in terms
of style, spacing, height and width. In this way, a suitable readable font with similar characteristics of
the target font is used in the place of a missing font.
Font Emulation is often acceptable when digital printing, and can be preferable to the file not being
produced at all.
Font Emulation has the following characteristics:


The ability to recognize the missing font by name.



A database of style, spacing, height and width for each font name.



The database currently contains over 1600 specified fonts.



Font Emulation only supports the standard Latin characters.

Navigator RIP version 9

User Manual

297

Fonts

11.13.1 Using Font Emulation
Font Emulation is enabled by checking the Enable font emulation option in the Page Setup Options dialog.
Once enabled, Font Emulation currently catches references to over 1600 fonts. The type of font that
can be emulated is not important because fonts are matched by name. If the font name is in the database the font can be emulated. See Modifying the Font Emulation database on page 300 for information on how to modify the font database.
Note: CID Fonts are not emulated.
If a request for a font returns an error, or anything other than the requested font, Font Emulation first
looks up the font name in the FontEmulation dictionary, and then, if necessary, may go on to look up
the font in the supplied database on disk.
If Font Emulation fails to emulate a font (for whatever reason), the RIP will behave as if Font Emulation had not been switched on. That is, if the RIP is configured to abort jobs when a font is missing,
the job will abort; if the RIP is configured to substitute Courier for the missing font, Courier will be
used.
There are two situations when fonts are emulated these are: when the font requested is not found or
when a font error occurs. The following sections describe the two scenarios:

11.13.1.1 Font not found
Font Emulation will be used for PostScript language and PDF files if:
1. The required font is not embedded in the job and
2. The required font is not installed in the RIP and
3. The required font is not handled explicitly by font substitution.
Font Emulation will only regard font substitution as successful if the font name returned by any
substitution is exactly the same name as the requested font. Therefore, in most cases Font Emulation will override font substitution. If however Font Emulation fails, the font previously
selected for substitution will be used.
Currently there is not automatic way of excluding fonts selected for substitution from being
emulated. If you want to use font substitution instead of the emulated font, that font will have to
be explicitly disabled in the /SW/Config/FontEmulation file.
4. Font Emulation is enabled and
5. The required font is not disabled in /SW/Config/FontEmulation file and
6. The required font is defined or aliased in /SW/Config/FontEmulation or defined in the Font Emulation database.

298

User Manual

Navigator RIP version 9

11.13

Font Emulation

11.13.1.2 Font error
Font Emulation will be used for PostScript language and PDF files if:
1. A font error is encountered attempting to use a font embedded in a job or installed in the RIP
(this includes the error produced when selecting Abort the job if any fonts are missing in the Page
Setup Options window) and
2. Font Emulation is enabled and
3. The required font is not disabled in /SW/Config/FontEmulation file and
4. The required font is defined or aliased in /SW/Config/FontEmulation or defined in the Font Emulation database.
Note: PDF files usually include a PDF FontDescriptor for each font required by the PDF file, even for
fonts which are not embedded. If Font Emulation is employed for a PDF file, the FontDescriptor in that
PDF file will be used in place of the emulation data in the RIP. Also, the FontDescriptor can be used
even if the font is not defined in the Font Emulation database or /SW/Config/FontEmulation file.

11.13.2 Messages
When a missing font is successfully emulated the following message appears:
%%[ Warning: Font <...> emulated. ]%%

Note: <...> is the name of the missing font.
If Font Emulation's attempt to get the required font returned an error, and the font is unable to be emulated, the following error is generated:
%%[ Error: Font <...> not found. (Emulation unknown) ]%%

However, if the font returned is not what was asked for (for example, Courier), and the font cannot be
emulated, the following warning is output but the RIP will continue to use whatever font was returned:
%%[ Warning: Font <...> not found. (Emulation unknown) ]%%

That is, if a font is missing and it cannot be emulated, an error is only generated with emulation
switched on if there would have been an error with it switched off.
If the missing font cannot be found in FontEmulation or the database, the following message appears:
%%[ Error: Font <...> not found. (Emulation not known)]%%

If emulation is switched off for a particular font, the following message appears:
%%[ Error: Font <...> not found. (Emulation disabled)]%%

If there is an error in the Font Emulation dictionary the following message appears:
%%[ Error: FontEmulation syntax /<...> invalid value. ]%%

In the unlikely event of an internal emulation font being replaced by a normal font, the following message appears:
%%[ Error: Font <...> not found. (FontEmulation installation}]%%

Navigator RIP version 9

User Manual

299

Fonts

11.13.3 Modifying the Font Emulation database
You are able to add to or modify the Font Emulation database using the file SW/Config/FontEmulation:



Aliasing of a font in the database so an identical font with a different name can be emulated.
Switching Font Emulation off for a specified font. This is useful if a corporate logo is using a
font in the database.



Override a font definition in the database.



Add a new font definition to the database.

300

User Manual

Navigator RIP version 9

12
Calibration
This chapter discusses calibration of output devices. Calibration involves the measurement of test
images produced on an output device and the use of those measurements to produce stable images
with good tonal values: here, good means consistent and usually linearized (in some measurement system). Some devices have a published specification that you can use in place of measured data: this is
true of many printing presses. In demanding applications, you may use several different calibrations
on the same device, according to the settings on the device or within the RIP.
This chapter describes how you can produce suitable test images (called targets or test strips), measure
their characteristics, then enter or edit calibration data, while Chapter 5, Configuring Output Formats,
describes how you can choose different calibrations when producing output.
A mechanism is provided that enables a third-party application to push calibration sets into the RIP. It
is intended to replace the method used by some vendors to emulate the processing performed by the
Genlin tool, and to avoid the need for a final manual step to import the calibration data. Calibration
sets may be submitted as a PostScript language file to the RIP, calling the PushCalibration procedure in
the HqnPushCalibration procset. Calling this procedure does not trigger any raster output, and files may
be submitted through any input channel configured on the RIP, such as hot folders, Unix-style sockets
and so on. For more information on this see the Push Calibration Harlequin Technical Note 081.

12.1 Why calibration is needed
Regardless of the accuracy of an output device, the media and other consumable items can vary and
have an effect on the output. For example, an imagesetter may produce an accurate and stable exposure of the media on which it is imaging but the reaction of that media varies from paper to film, and
from one media manufacturer to another. Also, laser dots are never square (as in an idealized raster),
they usually overlap, often cannot resolve a single pixel, and cannot always be turned off between
adjacent pixels. Similarly, in direct output devices, overlap of toner dots in laser printers or ink spreading in inkjet devices often produces a deviation of some kind between required gray levels and those
actually output.
Whatever the physical reason, the result is variability or non-linearity and some adjustment is almost
always necessary to compensate for these physical artifacts. This is called calibration.
Note: In almost all output devices, a solid (100%) black area prints as a 100% black area, and white
always prints as white. Any failure to achieve this degree of faithful reproduction usually indicates a
problem or maladjustment in the output device, which you must cure before attempting calibration.

Navigator RIP version 9

User Manual

301

Calibration

Consider the irregular solid line in Figure 12.1. It shows an example of the kind of response typically
seen from red-sensitive paper on a Helium/Neon-based imagesetter. The diagonal dotted line represents the theoretical line that would be shown for a perfect material. The arrowed lines show how if
you request a 50% tint you will actually see something like a 65% tint on paper, when measured with
a densitometer.
When setting flat tint areas for monochrome print work, variation in gray level is often immaterial
because the relatively small tonal variations encountered will not be visible to an untrained eye. But as
soon as scanned images are introduced into monochrome work, it becomes apparent that highlight and
shadow detail is lacking and, typically, that the image is darker than expected. The higher the halftone
frequency used, the more the shadow areas will fill in and highlights will lighten‚ and the more necessary calibration becomes.
Color process work brings the problem into flat tint work as well, because variations of only a few
percent from the requested value in just one of the color plates can throw the final apparent color well
away from that intended.
Note: Calibration is important in color work, but it is not a complete answer. Calibration is sufficient
only where the originally requested colors are prepared with the final output device in mind; calibration can adjust the individual color values but not the hues of those colors. A color management system is required to make adjustments which change hues, as for example in digital proofing.
The RIP allows calibration sets to be built for particular configurations. By choosing appropriate calibration sets, you can make the RIP correct for variations caused by different output devices, line frequencies, exposure values, dot shapes, and negative / positive setting.

Gray level measured from paper ( % )

100

80

60

40

20

20

40

60

80

100

Gray level requested ( % )

Figure 12.1 Response of red-sensitive paper on a Helium/Neon-based imagesetter

302

User Manual

Navigator RIP version 9

12.2 Calibration and linearization

12.2 Calibration and linearization
Linearization is a special case of calibration, commonly used when producing output on an imagesetter.
Linearization is the process of adjusting values on output so that the result is proportional to the values
requested, in some suitable measuring system. On film, this is usually a matter of ensuring that the
gray levels produced are the ones you request in halftone dot area coverage. For example, if you ask
for a 42% tint in your page make-up application then, after linearization, the output device produces
that 42% tint correctly.
Note: Calibration can only provide the desired output to the accuracy with which you can measure
gray levels, and with which the output device can produce them. See Assessing attainable accuracy on
page 316 for details.

12.2.1 Non-linear devices
It is an established industry practice to accept non-linearity in the transfer from film to printing press.
Frequently, whoever performs the scanning or layout design uses their judgement to introduce a compensatory adjustment in the scanner settings or choice of tints, basing the compensation on the kind of
printing press to be used.
Calibration is still a valuable process in this scheme but the purpose is to produce a known and repeatable non-linear transfer.
It is possible to create a single calibration set that compensates for the combined characteristics of an
imagesetter and a printing press, but this scheme is inflexible and clumsy where several imagesetters
and presses may be used in various combinations. Also, you cannot account for absolute density variations.
A more flexible approach, and one provided by the RIP, is the ability to produce and use a calibration
curve for each color of a printing press, applied separately from film linearization. This improves the
accuracy and ease of compensating for the dot gain of, for example, Harlequin Dispersed Screening
(HDS). HDS screens gain more on press than conventional screens. Calibrating the press for use with
an HDS screen replaces a laborious and approximate compensation previously possible only by
changing the film linearity settings or scanning with HDS in mind. Note that although an imagesetter
is not a multi-color device, you can create a separate calibration curve for each color, to take account
of the different screen angles.
See Press calibration on page 318 for details of press calibration.

12.3 Calibration in the Navigator RIP
The calibration facilities allow several ways of working:


You can measure calibrated or uncalibrated targets.
This means that you can print a calibration target with the previous calibration applied and enter
only the values that are in error‚ possibly saving time and materials. Alternatively, you can start
again with an uncalibrated target as if no calibration exists. See Establishing a workflow on
page 313 for a discussion of the advantages and advisable controls.

Navigator RIP version 9

User Manual

303

Calibration



You can create a separate calibration curve for each channel of multicolor devices, for example
color ink jet printers and printing presses. If the output device or printing press supports additional colorants, you can create separate calibration curves for spot colors.
Although an imagesetter is not a multi-color device, you can create a separate calibration curve
for each color, to take account of the different screen angles.







If you are preparing a job for a printing press, you can create separate calibration curves for
output to film and output to a printing press. If you are not using ColorPro, you can retarget a
job from its intended printing press to another printing press, using a separate calibration set to
remove the compensation for the gain of the intended press. See Press calibration on page 318
for a discussion of the background issues.
Tone Curves allow you to make another set of color adjustments, in addition to the device calibration and the press calibration. See Tone curves on page 317 for details.
You can use different measuring systems, as appropriate for the kind of output device and measuring instruments.

Additionally, these features are arranged so that is easy to add and use the advanced facilities provided
by the ColorPro options. The extra facilities and changes of procedure associated with ColorPro are
described in the separate ColorPro User Guide.

12.3.1 Accessing calibration functions
The Navigator RIP Output menu contains the Print Calibration and Calibration Manager commands.
The Calibration Manager is also available from an icon button alongside the Calibration drop-down
list in the Edit Page Setup dialog box.
Use the Print Calibration command to display the Print Calibration dialog box. From here, you can
print test strips (targets) which enable you to measure the characteristics of your output devices.
Note: If calibration strips are used then late color management is disabled. See Notes on Use late color
management on page 360.
Use the Calibration Manager command to display the Calibration Manager dialog box. This allows you
to create and edit calibration sets using measurements from test strips or published figures, and to
enable or disable the use of particular calibration sets. The consequence is that you can adjust for dayto-day or printer-to-printer variations in ink density and similar variations in the exposure of imagesetters and platesetters.

12.3.2 Calibration sets
A calibration set is a piece-wise linear curve that maps requested tint levels to actual tint levels and
has some associated information including the intended output resolution, exposure, dot shape, range
of screen frequency, and negative / positive settings that the calibration set has been prepared for.
Whenever you select one or more calibration sets in the Edit Page Setup dialog box, the RIP uses
those calibration sets to output jobs.

304

User Manual

Navigator RIP version 9

12.4

Example procedure

12.4 Example procedure
The following procedure outlines basic cases in which you can create and apply a calibration set for a
simple monochrome or color device driven directly by the RIP. The same principles apply to more
complex cases involving color devices and printing presses.

12.4.1 Devices and requirements
Although an imagesetter is not a multi-color device, you can create a separate calibration curve for
each color, to take account of the different screen angles.
To create calibration sets, you need a reliable and accurate densitometer that is reflective for paper and
transmissive for film. The densitometer that you select should ideally display dot coverage in percentage terms, rather than simple density readings, since calculating coverage by hand is time-consuming
and prone to errors.

12.4.1.1 Devices requiring exposure settings
The procedure for a device such as an imagesetter needing a correct exposure setting is:
1. Where appropriate, establish the correct exposure for the device.
2. Print and measure a calibration target.
3. Use an Edit dialog box to enter the data and label it with the information describing its use. You
may also want to inspect the resulting curve and smooth or edit the data values. This is where
you name the calibration set.
4. Apply the calibration set you have created and check that it provides good output.
Section 12.4.2 through Section 12.4.5 describe these steps in more detail.

12.4.1.2 Devices without exposure settings
The procedure is simpler for a device that does not have an exposure control, such as a color inkjet
printer supplied with reference calibration sets.
Note: It is very unlikely that you will achieve good results if you try to use an inkjet printer without a
reference calibration set (or other control of ink delivery). The typical response of an inkjet printer in
its raw state is to produce very dark images and deliver so much ink that there are severe problems
with drying time or ink running across the printed page.
Supplied reference calibration sets or calibration profiles define an ideal or reference printer. Using a
reference calibration set greatly improves output, but the response of your printer (the user printer)
may differ from the reference printer because of small but inevitable variations between printers. You
may be satisfied with the reference calibration. To obtain the best output you can calibrate the user
printer so that it responds in the same way as the reference printer; this produces your own calibration
set that you can use in your Page Setup, and edit or update as required.
When you create a Page Setup the Calibration entry must match the combination of device, media, and
resolution being used. This is true for both supplied calibration profiles and your own calibration sets.

Navigator RIP version 9

User Manual

305

Calibration

Note: You can tell apart supplied calibration profiles and calibration sets that you have created
because most supplied calibration profiles appear in the Edit Page Setup dialog box with parentheses
( ) around the name shown in the Calibration list. See the documentation for the relevant output plugin
if you are in any doubt about identifying the entries in the Calibration list.
The Page Setup you use to print a target can use either kind of Calibration entry:




To create your own calibration set for a device for the first time your Page Setup must use a
supplied calibration profile for the device.
To edit your own calibration set your Page Setup must use that calibration set.

Once you have identified or created an appropriate Page Setup, follow the steps below to print a target
using this Page Setup:
1. Use the menu option Output > Print Calibration and choose your Page Setup in the From Page
Setup(s) list.
2. Choose the type of target that you wish to print from the Print For menu. Process Colors only is
often suitable. See Print Calibration dialog box on page 321 for details of all these options.
3. Prepare your printer‚ for example by loading the correct paper and click Print uncalibrated target. (Enable output in the Output Controller if necessary to get a printed target.)
Note: You must print the target on the paper for which the calibration profile or set was created
in order to obtain an accurate calibration set.
4. Wait for this target to dry thoroughly before attempting to measure it. Even when a target
appears dry, It can take ten minutes or more for some combination of inks and media to stabilize
completely so that the colors are no longer changing and the target is unaffected by handling.
You can then follow the rest of this overall example procedure from Creating a calibration set on page
309.

12.4.2 Choosing the correct exposure
For devices such as imagesetters where calibration is performed with respect to dot area coverage, the
first step is to ensure that your output device is set up with the correct exposure. Attempting to calibrate an imagesetter with badly adjusted exposure settings will waste a lot of time and film, and may
lead to undesirable effects at plate-making time, such as variable dot gain. Run a series of test pages at
varying exposures to determine the setting required to give a solid black and a clear white.
You are likely to need to select a different exposure for each combination of media and resolution.
Halftone frequency and dot shape will not affect required exposures significantly. However, the media
and the chemistry of the developer used can make a big difference: stable developer chemistry is very
important for accurate calibration.

12.4.2.1 Printing exposure tests
Choose an appropriate Page Setup. This should set the correct output device, output resolution, and
negative / positive settings, dot shape, and screening details if appropriate. The dot shape and screening details are set in the separations style of the Page Setup. The exposure is unimportant at this stage:

306

User Manual

Navigator RIP version 9

12.4

Example procedure

you will override it to make the test print. Creating a calibration set on page 309 describes how to create a calibration set for this Page Setup.
Note: If you are using a drum device with variable film feed, you will usually want to rotate the page
or select film saving when printing test strips. See Advanced Media Saving on page 112 for details.
Choose Output > Print Calibration. The RIP displays the Print Calibration dialog box, shown in
Figure 12.2.

Figure 12.2 Print Calibration dialog box

Select an appropriate Page Setup in the From Page Setups list.
Note: If you forget to choose a Page Setup, the RIP uses the one that you chose last time you used the
Print Calibration command. If you have not used the Print Calibration command in this RIP session, the
first Page Setup in the list is used. To change the order of this listing, see Reordering Page Setups on
page 77.
Note: Some settings in the chosen Page Setup are ignored or altered‚ notably those in a ColorPro color
management option that would change the color of a graphic object.
Each button creates a slightly different target (test strip) or series of targets. To create the appropriate
series of targets for the example procedure, you need to set up some values and then click Print exposure sweep.
Note: If your output device does not support software exposure control, run the tests manually
instead, according to your output device manufacturer instructions. Typically: set the exposure manually, click Print uncalibrated target, and repeat for each exposure value.
Print exposure sweep uses the values in the associated From, To, and Step text boxes to print test strips at

each of several exposures in the range.

12.4.2.2 Messages
Calibration and color management is setup as normal when running a calibration target. This is different to previous behavior where it was not setup. At the start of the target procset, everything that has to
be turned off is turned off.

Navigator RIP version 9

User Manual

307

Calibration

The target procset now gets information about its environment from PostScript language data in setcalibration and various color management operators. Therefore, calibration and color management must
be setup normally for this information to be present.
A manifestation of this is that when running calibration targets the normal messages for calibration
and color management are displayed, followed by a number of extra switched off messages, for example:
Setup loaded: "Default Page Setup"
Starting Job On, 10 May, 2011 10:27:13
Using Color Setup "testing"
Using calibration for device "Glossy Photo Hvy 720"
Color management switched off for calibration job
Tone curve calibration switched off for calibration job
Intended press calibration switched off for calibration job
Actual press calibration switched off for calibration job
Device calibration switched off for calibration job
Running Uncalibrated Target for Default CMYK + spot colors target:

Only the relevant messages appear, that is, if color management is not enabled, its ‚switched off message will not appear.

12.4.2.3 Acceptable exposure values
The ranges of values that you can enter into the From, To, and Step text boxes are dependent on the
output device. On several types of device, the values do not form a continuous range. Read the manual
for your output device carefully before entering any values.
The Navigator RIP makes exposure tests over a range of exposure values by starting at the first exposure value that you want to produce, and then at regular steps up to and including a last exposure
value. For example, if you want to print test pages at exposure settings of 120, 125, 130, and 135, then
type 120, 135, and 5 into the boxes. Typically, each test page is just over 2 inches long.
Care: If you are using an output device where increasing exposure values do not necessarily mean
increasing laser intensity smoothly at the film surface, take care in selecting the settings for this dialog
box. If necessary, print out two sweeps, for example, 225 through 230 and 100 through 120.

12.4.2.4 Checking the target
Each of the test pages should look like that in Figure 12.3 unless you choose a composite ‚Separations,
Screening & Color Style in which case you will output a vertical exposure test page with all colors on
a single page. In addition, if you choose CMYK halftone output you will produce four individual test
pages, one for each separation. (Test pages designed for use with densitometers that move the media

308

User Manual

Navigator RIP version 9

12.4

Example procedure

automatically may look slightly different, often having one strip of patches for each color, and it is
possible to have custom targets supplied with each output device driver.)

Figure 12.3 Uncalibrated exposure sweep test page

If you have a densitometer, select the correct exposure by reading the density values of the two
squares labeled D Max/Min on each of the test pages from your exposure sweep. (Measure both
squares to check for a uniform exposure across the page.) Optimum density varies from material to
material, but generally a densitometer reading of between 3.5 and 4.0 is acceptable for film, and
between 1.8 and 2.0 for paper. (The densitometer should of course be switched to give density readings rather than dot percentage readings.)
If you do not have a densitometer, you can still use this page to select an approximate exposure setting: study the fine detail in the bottom left of the page, and select the exposure that gives clear, fine
white detail in black areas and vice versa. As an additional guide, you should be able to tell the difference between the 0% and 2% tint panels, and between the 98% and 100% panels. (These figures are
for film or bromide: inkjet output can be black from the 80% patch upwards.)
Keep the strip that you decide has the right exposure: you can measure values from it to create the calibration set. If you think a value falling between those used in your exposure sweep might be better,
print a new target at that exposure. For example, set Exposure in the Edit Page Setup dialog box and
then use Print uncalibrated target. You can only set the Exposure in the Edit Page Setup dialog box if
your output device supports software exposure control, otherwise the option is grayed out.

12.4.3 Creating a calibration set
You can create a calibration set after you have measured data from a target or obtained it elsewhere:
for example, from a manufacturer specification for the device.
Choose Navigator RIP > Page Setup Manager. The RIP displays the Page Setup Manager. Select the
Page Setup for which you printed the exposure test (or single calibration target) and click Edit. In the
Edit Page Setup dialog box, set the Exposure to the chosen value. If your output device does not support software exposure control, the Exposure option is grayed out and you may have to set the exposure manually.
Click the Calibration Manager button to open the Calibration Manager, shown in Figure 12.4. This button is next to the Calibration and Tone Curves drop-down lists.
Calibration sets are grouped by device and by color space. When you open the Calibration Manager
from the Edit Page Setup dialog box, the RIP displays the calibration sets for the current device and
current color space, if any have been created. The choice of separations style determines the color
space. When you first open the Calibration Manager after installing the RIP, the list box is empty.

Navigator RIP version 9

User Manual

309

Calibration

If you open the Calibration Manager using the Output > Calibration Manager command, select the
appropriate device from the Device drop-down list and, if necessary, select a color space from the Color
Space drop-down list.

Figure 12.4 Calibration Manager dialog box

The column headings are various properties of a calibration set. The first column in the list is the name
of the calibration set and the last column is the edited or unedited status of the calibration. Each of the
remaining columns in the list corresponds to the name of one of the warning criteria in the Edit
Calibration dialog box. See Calibration Manager dialog box on page 323 for full details.
Click New to create a new calibration set for the first time. The RIP displays an appropriate version of
the Edit Calibration dialog box.
Subsequently, you will probably edit the set, as described in Editing calibration sets on page 313.

310

User Manual

Navigator RIP version 9

12.4

Example procedure

12.4.4 Entering the data
When you edit a calibration set, the RIP displays the dialog box shown in Figure 12.5.

Figure 12.5 Edit Calibration dialog box

If you leave the Edit calibration dialog by selecting Cancel the new values will not be saved and the
calibration will work as before. If however, you decide to save the new values the calibration will
work using the default curve and will produce more accurate results.
When you click New to create a new calibration set, you enter the Edit Calibration dialog box for an
uncalibrated target with all Warning criteria boxes empty. The warning criteria list the resolution, dot
shape, screen frequency, and so on that this calibration set is intended to work with.
At least, you must:


Name the new calibration set.



Show what kind of values you are measuring.



Provide data values.

You should also use the Warning criteria boxes to show which settings the calibration set is intended to
work with.
Edit Calibration dialog box on page 327 describes how to use all the items in this dialog box, but this
short procedure mentions the essential items:
1. Type a name into the Name text box.
2. Choose the type of measurement you are making from the Measurements as pop-up menu dropdown list.

Navigator RIP version 9

User Manual

311

Calibration

3. Measure the dot coverage percentages from densitometer readings taken from the target that
you chose in the procedure Choosing the correct exposure on page 306 and enter these values
into the labeled boxes for calibration data. (The Import button allows you to import data values
taken from a file, which can be generated by a separate program, Genlin. See Appendix C,
Using Genlin on page page 389 for use of the program and see page page 332 for details of how
to read the file.)
Note: Each value you enter must be consistently greater than the preceding value (or less than it
if you are using a negative film or meter).
The Smooth button allows you to smooth the ends of the graph (and by doing so, the values of
the calibration set) in small steps. If a set of values are out of range or non-monotonic a warning
will appear when you try to exit from the dialog.
4. In the Warning Criteria panel, enter the settings used to create the target: resolution, dot shape,
screen frequency, exposure, and say whether it applies to both negative and positive settings.
Note: If you create a calibration set from the Edit Page Setup dialog box, you need only select
the Warning criteria check boxes. The RIP takes the default settings from the Page Setup you are
editing.
Click OK to save the calibration set.
You can create a new calibration set, or save all the changes you have made to date by clicking OK in
the Calibration Manager.
You can create or edit a calibration set in the Calibration Manager, even if you do not want to use it in
the current Page Setup. Once you have saved the new calibration set by clicking OK in the Calibration
Manager, it will remain even if you Cancel the Edit Page Setup dialog box. If you opened the Calibration Manager from the Edit Page Setup dialog box, you can also save the changes by clicking Select. In
addition to saving the changes, using the Select button displays the selected calibration set in the Calibration control in the Edit Page Setup dialog box.
If you click Cancel in the Calibration Manager, you discard all changes to calibration sets that you
have made since you opened the Calibration Manager.
When you edit a calibration set for color data, the procedure is very similar, except that you must enter
data for each color channel. Note that although an imagesetter is not a multi-color device, you can create a separate calibration curve for each color, to take account of the different screen angles.

12.4.5 Applying the calibration
You must select a calibration set from the Calibration drop-down list in the Edit Page Setup dialog box
in order to use it. Subsequently, you can save the Page Setup and recall both the Page Setup and its
corresponding calibration set as required.
Select your new calibration set in the Edit Page Setup dialog box, and click OK to save your changes
and close the dialog box. Click OK in the Page Setup Manager.
Return to the Print Calibration dialog box, choose the Page Setup in which you have chosen the new
calibration set, and click Print calibrated target. You should see improved tonal rendering in the calibrated target.

312

User Manual

Navigator RIP version 9

12.5

Editing calibration sets

Measure the tint values on this calibrated target. If the values are wrong in any patches, reread these
tint patches on the original exposure sweep target, and edit the values in the calibration set again.

12.5 Editing calibration sets
The procedure described in Example procedure on page 305 is adequate for creating new calibration
sets. This section describes how you can choose a strategy to keep calibration up to date, choose
which calibration sets to use, and edit existing calibration sets.
There are three more general sections: Consistency of calibration on page 316, discusses establishing
and maintaining calibration; Tone curves on page 317 describes tone curves calibration; and Press calibration on page 318 describes press calibration.
For details of the individual dialog boxes, see Print Calibration dialog box on page 321, Calibration
Manager dialog box on page 323, and Edit Calibration dialog box on page 327.

12.5.1 Establishing a workflow
There are three possible workflows for maintaining calibration:


Historical record.



Recalibrate every time.



Adjust for drifts in calibration.

It is usually best to use the same method for any one device. It is possible to change from one to the
other, but you may see values in the Edit Calibration dialog box which, though correct predictions, are
not values you recognize because they have been calculated by the RIP.
Historical

Sometimes it is desirable to keep a historical record of calibration sets. In this
case, an uncalibrated strip or target is printed on each occasion when calibration is carried out, and a new calibration set created (with the New button).
The new calibration set must be selected explicitly in the Edit Page Setup dialog box each time.

Recalibration

This is the conventional method. Here an uncalibrated strip is printed each
time calibration is required. On the first occasion, a set is created with New.
On subsequent recalibrations, Edit from uncalibrated target is selected and the
values in the dialog box changed to reflect the new readings from the strip.
Then a calibrated strip is printed and the linearity of the result is checked, and
if the linearity is unsatisfactory another uncalibrated strip is printed to correct
the flaws. (The new calibration values are in the existing set, so there is no
need to select a new calibration set in the Edit Page Setup dialog box.)

Adjustment

Here a calibrated strip is printed on each occasion (except the first when an
uncalibrated strip is printed to enter the values with New). Edit from calibrated
target is selected. This should then show the perfect values. If the device has
changed, these values will be a little in error and the new values can be

Navigator RIP version 9

User Manual

313

Calibration

entered. A second calibrated strip can be printed to check the result. (Again,
the new calibration values are in the existing set, so there is no need to select
a new calibration set in the Edit Page Setup dialog box.)
Note: When working in density rather than percent dot, it is not immediately
obvious what the correct values should be; Edit from calibrated target provides
this information.
However, whatever method is adopted, the most important rule is to match the edit command to the
type of target. To be explicit:




When entering measurements using uncalibrated test strips, always do so with Edit from uncalibrated target (or New).
When using calibrated test strips, always do so with Edit from calibrated target.

Calibration will be completely wrong if you do not follow this rule.

12.5.2 Variations on the Edit Calibration dialog box
When you edit a calibration set, the RIP displays the dialog box shown in Figure 12.5, page 311. This
dialog box lists the resolution, dot shape, screen frequency, and so on that this calibration set is
intended to work with. You can change these settings as necessary. See Edit Calibration dialog box on
page 327 for details of all controls.
There are variations on this dialog box for calibrated and uncalibrated targets and for tone curves,
printing presses, and other devices. These variations include the nature of the values you enter to
define the curve and the color channels you can select.
The title of the dialog box changes to show the kind of target and the device. The general form of the
title is:
Edit  target for 

depends on which edit button you clicked in the Calibration Manager.
 
is the selection in the Device drop-down list in the Calibration Manager.
When you edit the calibration set for a printing press, the differences are:




The presence of a Press drop-down list in the Warning Criteria panel. In this case the default
calibration set is determined by the selected profile.
The types of measurements available in the Measurements as drop-down list.

When you edit the calibration for tone curves, the differences are:




314

The options in the Warning Criteria panel are unavailable (except for the Use for Pos & Neg
option for monochrome devices).
The Force solid colors option is unavailable.

User Manual

Navigator RIP version 9

12.5

Editing calibration sets

12.5.3 Choosing and labeling calibration sets
It is important to choose a calibration set that is appropriate for the job you are processing. If you set
the warning criteria for a calibration set, the RIP warns you if the settings in the Page Setup or job
conflict with these criteria. By setting a Page Setup option, you can tell the RIP to abort any job that
fails the criteria. See Warning Criteria panel on page 328 for details.
Name the calibration set carefully, so that you can identify all the parameters associated with it. For
example, it may not be sufficient to name the calibration set with the chosen resolution, since the dot
shape and line frequency could also affect the calibration.
Most settings have obvious single values. Screen frequencies and positive / negative settings need
some discussion.
Screen frequencies are given as a range to indicate the range of frequencies for which the set is valid.
It is a good idea to start by working out which frequencies you expect to use,for example, 85, 100,
112, 120, 133, 150, 175 lpi, and so on. You can then create ranges centered on each of these values‚
for example, 75 to 93 lpi, 93 to 106 lpi, and so on. You do not have to create calibration sets for the
full range of frequencies‚ you may find, for instance, that the lower frequencies do not need calibration, either because the output device is fairly accurate at these values, or because the work you do at
those frequencies does not demand accurate output. Also, it may be that the same calibration set will
apply to a wide range of frequencies‚for example, 100‚300 lpi.
You must inform the RIP about the various combinations of positive and negative output and measuring devices.
The Measurements as drop-down list allows you to tell the RIP which densitometer mode you used
when performing your density readings. Some densitometers read in positive dot, others in negative
dot (that is, a clear area may read 0 (zero) or 100).
For a monochrome device, you can specify what kind of output you are measuring using the Negative
media check box.
The Use for Pos & Neg check box allows you to record whether the RIP can use this calibration set for
both positive and negative output, or only one. The default setting of this box (selected) is usually the
best to use, but for very accurate calibrations, apply this setting only to Euclidean dot shapes. (See
Chapter 6, Screening for a description of Euclidean screening.) When this check box is not selected,
the RIP uses the calibration set only for positive or negative, as set in Negative media.

12.5.4 Saving calibration sets
Click the OK button to save the calibration set. You can then edit a different calibration set, create a
new calibration set, or save all the changes you have made by clicking the OK button in the Calibration Manager. If you opened the Calibration Manager from the Edit Page Setup dialog box, you can
also save the changes by clicking the Select button. In addition to saving the changes, the Select button
displays the selected calibration set in the Edit Page Setup dialog box.
If you click the Cancel button in the Calibration Manager, you lose all the changes to calibration sets
that you have made since you opened the Calibration Manager.

Navigator RIP version 9

User Manual

315

Calibration

12.6 Consistency of calibration
Once you have produced a number of calibration sets for a device, you must be sure that they continue
to be accurate to an acceptable degree, and that you use them appropriately. This section describes
what to do and check in routine use.

12.6.1 Checking calibration
Once you have produced a calibrated output successfully, you need only check that the calibration
remains stable. Do this at suitable time intervals, which may vary from twice a day to once a month‚
depending on your requirement for accuracy and what you learn about the stability of your systems.
Even if you check calibration sets only occasionally, always check them when your imaging or processing environment changes, for example, when you load film, ink, or ribbon from a new production
batch, or change your processor speed or temperature. In many cases, it may also be advisable to
check exposure settings.
To check the calibration, click Print calibrated target in the Print Calibration dialog box and measure
the density of the tint panels.
If the value for any tint panel drifts outside your acceptable range, you can use data from the calibrated
target to correct the calibration set. You need record only the values that are in error. Display the Calibration Manager dialog box, select the calibration set, and then click Edit calibrated target. In the Edit
Calibration dialog box, enter the newly measured value or values. (Alternatively, you can click Print
uncalibrated target in the Print Calibration dialog box, read all the densitometer values from that target,
and then use Edit uncalibrated target to edit the calibration set appropriately.)

12.6.2 Assessing attainable accuracy
It is relatively easy, using these procedures, to maintain the accuracy of calibration data on an imagesetter using film. This accuracy can be within 2% of a perfect result. The accuracy obtainable with
bromide paper is far lower, and it is not feasible to maintain densities closer than about 5%. (One reason for having a less accurate requirement for bromide paper is that two densitometers are likely to
show much larger differences when measuring the same piece of paper, than when measuring the
same piece of film.)
When assessing your required level of accuracy, take into account the accuracy of the imaging engine
itself: an imagesetter rated as having a variation of less than 2% across the film cannot be expected to
be able to produce work calibrated more closely than this.
Some reasons for inaccurate imaging are:






316

A coarse screen may not be able to reproduce an exact percentage value or may provide varying readings depending on where in a patch a density reading is taken.
Values intermediate between patch values are interpolated. This process is never perfectly
accurate.
Some imaging technologies produce variations in tones depending on where in the page the
tones are located, and some produce output that depends on the tones in neighboring areas of
the page.

User Manual

Navigator RIP version 9

12.7

Tone curves

Other, variable, factors that can significantly affect calibration results include the following:









The temperature (especially the consistency of the temperature) at which the imagesetter and
the film processor are maintained.
The length of time and the temperature at which film, paper, or ribbons are stored.
Whether the processor is used for other materials (for example, duplication film) as well as
imagesetter film.
The time between photographic processing and measurement. Many films have a colorant that
fades rapidly after processing.
The time and storage conditions between printing and measurement. The output from inkjet
and dye-sublimation printers can alter significantly over a period of weeks, or even hours if
subjected to bright sunlight.

Reasonable calibration can normally be achieved easily, but for very high quality calibration a considerable amount of care in setting up and controlling the imagesetting environment is required.

12.7 Tone curves
Tone curves allow you to make another set of tone or color adjustments, in addition to the device calibration and the press calibration. In a properly controlled workflow you should have little need to use
tone curves but you may find that they offer a quick and effective way of working around short-term
difficulties such as lack of calibration facilities or badly formed jobs that you cannot easily correct in
the job.
For example, you may have to process a particular set of images where the correct calibration does not
produce an acceptable printed result. There are two common cases. You may be able to produce a tone
curve using exact data, perhaps coming from a known setting in scanning or later processing. Alternatively, you may wish to emphasize a color or tonal range in response to artistic direction, such as a
request to boost the mid-tone magenta component by 10%.
In all cases, the tone curve is an exact record of what you have done, kept separate from the device and
press calibrations.

12.7.1 Creating and using tone curves
To create tone curves, select the Tone Curves device in the Calibration Manager. Create the calibration
set for the tone curves in the usual way, entering data values for the patches and possibly using
Smooth.
You apply tone curve calibration sets using the Tone Curves drop-down list in the Edit Page Setup dialog box.
For the Navigator RIP version 5.1 revision 1 and later, tone curves behave in the opposite sense to
device and actual press calibration curves. This normally means that you enter higher values where
you wish to see more output.

Navigator RIP version 9

User Manual

317

Calibration

For example, assuming a positive-reading system where 0% is no output and 100% is full density or
coverage, enter values higher than the nominal values of the patches to produce more output for a
given input.
Note: In the Navigator RIP version 5.1 revision 0 and earlier, tone curves behaved in the same sense
as device and actual press calibration curves; in these earlier versions, for the example just given, you
had to enter lower values where you wished to see more output.

12.8 Press calibration
Press calibration allows the RIP to make press adjustments to the density of the ink on paper on a
printing press independently from the intermediate medium (usually film) used to prepare printing
plates.
Press calibration can also be set up to work in absolute density measurements instead of halftone dot
area coverage, which means the actual color can be predicted rather than just its relationship to the
maximum and minimum densities, as on film.
Press calibration provides these facilities:


The press can be put into the same state as some reference state.
Though this can often be achieved by adjusting press controls, the RIP provides a finer degree
of tuning than just the maximum density or midtone controls common on the press.




The press can be accurately tuned for ColorPro.
An adjustment can be made for a different press from the one for which the job was originally
prepared.
This might be needed because it really is a different machine, or because the dot-gain characteristics have changed over time: for example, as the blankets have worn.





An independent adjustment can be made to compensate for changes to the job after scanning
and so on, which affect the gain on press, such as substitution of HDS screens.
The gain of the press can be expressed in relative terms.
This form is common in manufacturers documentation: for example 20% at 70%, rather than the
more common measure on film as 70% reads 90% (which is equivalent).



Readings can be estimated from a small number of data points supplied by the manufacturer.

12.8.1 How does press calibration work?
Conventionally, a color job is prepared by combining scanned pictures with application-generated text
and graphics. In this process there are two assumptions made:




318

The film to which the resulting raster will be first directed is linearized, that is if the job
requests a 25% gray value, a densitometer would read 25% on that area of the film.
The press will gain further, a lot further usually‚ and the scanner operator takes this into
account when preparing a scan. This means the scanner operator must know or guess the gain
of the target press. It also means that the colors in application-generated graphics are similarly

User Manual

Navigator RIP version 9

12.8

Press calibration

produced by guesswork, experience, or by reference to samples printed on a similar press (previous work, or more likely chosen from swatches in an appropriate PANTONE Color System
or from a system with a similar intent).
The consequence is that if the gain of the press is not as expected, then the job will not print correctly.
This might be because:


It is not the press originally intended.



The dot gain has changed (or was never known).



The dot gain was assumed for some particular rendering process, which has changed.
For example, you may be using a HDS screen which gains more on press than conventional
screens. The film can be linearized as normal, and a further adjustment made to account for the
difference between the HDS screens and the conventional screens. By separating the two adjustments, it is now possible to linearize to film again without having to repeat the whole process.

Whichever of these reasons holds, the job has the gain of the press already accounted for. This means
that the overall effect of calibration in the output path is to first apply any primary calibration to
remove compensation for the gain of the intended press, and then to compensate for the gain of the
actual press.
Note that the intended press calibration is not available when ColorPro is enabled. Instead, ColorPro
provides several options for processing color data ahead of the transfer to press: these options include
emulating the output of one press on another type of press. For details, see the separate ColorPro User
Guide.
For this reason, the process is split in two:
1. You give the gain (expressed as a calibration set) of the intended press, which may be one of:






A standard press
Some standard presses are built in to the Navigator RIP.
A variation on a standard press
A typical variation is, for example, an extra 5% gain at 50% over SWOP Type 1 printing
but with essentially the same shape of gain curve. You can create such calibration sets in
the RIP by extrapolation from the standard curves provided with the RIP.
A real press
This press might be one of a group of similar presses, another of which may be used to
print the job. Alternatively, this same press may actually print the job, but can no longer
print with the same gain as assumed when making the scans.

2. You give the gain of the actual press. The calibration here is expressing the adjustment needed
to put the press back into its reference state (what the press looked like when first calibrated),
which is not usually a linear state, but the characteristic dot-gain curve of a printing press.
The RIP can then do the calculations which account for the difference. This separation allows the
actual press behavior to be accounted for without needing to remember what differences to apply manually.

Navigator RIP version 9

User Manual

319

Calibration

12.8.2 Alternative uses of press calibration
It is also possible to work in two alternative ways, which are uncommon at present, but which we
expect to become more common in the future:




Scan to linear
Here the scanned images and application graphics are produced assuming the measured
response of the press, rather than the film, will be linear. The RIP provides a special (None) calibration set which can be used as the intended press for use in this situation.
Press is linear
Here the press is indeed set up to produce a linear response, but the job is not expecting this. In
this situation, the (None) calibration set would be chosen for the actual press, or more likely
some calibration set, derived from (None), that will bring the press back to its required linear
state. This is similar to printing to a full-color desktop printer.

Of course, it is possible to work with both of these ways simultaneously.
A special case of linear scans is device-independent color data images where the colors are expressed
in CIE L*a*b* for example, or held on Photo CDs in YCC format. Here, ColorPro is required to accurately reproduce the intended color, and in this case only the actual press calibration set is used. This
is also the case if CMYK colors are converted to device-independent colors first by ColorPro‚ in that
case the gain incorporated in the job is accounted for during the conversion by ColorPro.
Lastly, note that press calibration is not a substitute for ColorPro. Calibration can compensate for
changes in response of the individual process colors, but it cannot account for variations in colors of
inks and dyes. Therefore if the actual and intended presses are significantly different processes (a
proofing device and a press for example, or two entirely different kinds of press), the colors cannot be
accurately reproduced using only calibration.

12.8.3 Direct to press
There are two ways of calibrating for working direct to press.




You can assume a linear imagesetter and calibrate for the actual press as normal. In this case,
set the device calibration to linear: (None).
You can assume a linear actual press and calibrate for the device as normal. In this case, set the
actual press calibration to linear: (None).

12.9 Using a combination of calibration sets
If you are printing to a direct output device, the Page Setup can include a calibration for the output
device and a tone curve calibration. The RIP applies any calibration sets specified in the Page Setup in
this order:
1. The Tone Curves calibration.
2. The device Calibration.

320

User Manual

Navigator RIP version 9

12.10

Print Calibration dialog box

If you are preparing a job for a printing press, the Page Setup can include an imagesetter calibration, a
tone curve calibration, and calibrations for the intended and actual presses. The RIP applies any calibration sets specified in the Page Setup in this order:
1. The Intended Press calibration (to remove compensation for the gain of the intended press).
2. The Tone Curves calibration.
3. The Actual Press calibration (to compensate for the gain of the actual press).
4. The device Calibration (the calibration for the imagesetter).
The Intended Press calibration is not available when ColorPro is enabled. Instead, ColorPro provides
several options for processing color data ahead of the transfer to press: these options include emulating the output of one press on another type of press. For details, see the separate ColorPro User
Guide. The calibration set specified in Actual Press is always used.
The default curve, which is a device correction curve, is applied before any other calibration.

12.10 Print Calibration dialog box
Choose Output > Print Calibration to display the Print Calibration dialog box, as shown in Figure 12.2,
page 307.
You can select which Page Setup to apply while printing a test strip or exposure sweep by choosing an
entry from the list in this dialog box. If you select several entries then, when you click the button to
print the appropriate target, the RIP prints one test strip or exposure sweep for each Page Setup you
have selected.
Note: Some settings in the Page Setup are ignored or altered‚ notably those in a ColorPro option that
would change the color of a graphic object.
There may be different, distinct targets for each output device or type of device.
If the output format supports additional colorants (spot colors), you can choose to print the calibration
for Process Colors only, Spot Colors only, Process & Spot Colors, or for Monochrome only by selecting from
the Print for drop-down list. The output format is determined by the separations style of the Page
Setup.
The Monochrome only option supports calibration of a monochrome device such as an imagesetter.
Choose this option to print a single calibration strip for a Page Setup that normally generates separations. (This ability removes any need to produce a Page Setup used only for calibration.)

12.10.1 Buttons
Clicking a button prints at least one calibration target, and more if you have selected several Page Setups using the From Page Setups list, as described in Other controls on page 322. The options are:
Print uncalibrated target

Prints a target without using a calibration set‚ even if the selected Page Setup
has one or more calibration sets associated with it.

Navigator RIP version 9

User Manual

321

Calibration

Print calibrated target

Prints a target using the calibration set or sets associated with the selected
Page Setup. If the output device has not changed since the calibration set was
created then the nominal density values and the measured ones should be the
same.
Print uncalibrated press target

Prints a target for a printing press without using a calibration set. You must
select a Page Setup that produces separated output.
Print calibrated press target

Prints a target using the calibration set or sets associated with the selected
Page Setup. You must select a Page Setup that uses an Actual Press calibration
set and that produces separated output. See Press calibration on page 318 for
more details.
Note: The Default CMYK targets supplied with the RIP for Uncalibrated Target and Uncalibrated
Press Target have the same number of patches.
Print exposure sweep 

Uses the values in the associated From, To, and Step text boxes to print test
strips at each of several exposures in the range. This button prints an exposure sweep for each selected Page Setup, so be careful you do not produce
more targets than you intend. This prints an exposure sweep without using a
calibration set‚ even if the selected Page Setup has one or more calibration
sets associated with it.

12.10.2 Other controls
These controls affect the contents and number of calibration targets produced by the buttons described
in Buttons on page 321.
Print for

Choose the set of colors you wish to have printed on print test strips. You
may see just one option, usually Process Colors only, in this list if your output
device and the selected Page Setup do not support spot colors.
If the output format supports additional colorants, you can also choose to
print the calibration for Spot Colors only, Process & Spot Colors, or for Monochrome only. The output format is determined by the separations style of the
Page Setup.

From Page Setups

Select one or more Page Setups from this list, if desired.

322

User Manual

Navigator RIP version 9

12.11

Calibration Manager dialog box

From / To / Step
Print exposure sweep uses the values in these text boxes as, respectively, the

first, last, and increment values of exposure when producing an exposure
sweep. Take care to enter values so that the complete sweep corresponds to
valid exposure values for your output device.
For example, values of 100, 120, and 5 produce a sweep with exposures of
100, 105, 110, 115, and 120.
To recap, the From box is the first exposure setting, the To box is the last
exposure setting and the Step box is the size of the step. With values of, From
100, To 150 and Step 5. You will get 11 exposures from 100 to 150 in steps of
5.
Change the Step 5 to Step 10 and you will get 6 exposures from 100 to 150 in
steps of 10.

12.11 Calibration Manager dialog box
Click the Calibration Manager button in the Edit Page Setup dialog box or choose Output > Calibration
Manager to display the Calibration Manager dialog box, as shown in Figure 12.4, page 310.
This dialog box helps you create new calibration sets and manage your existing calibration sets. You
can edit sets to keep them accurate by entering data from new targets or to adapt a copy of an existing
calibration set: for example, to make it apply to a related group of settings. Finally, you can delete any
entry in the list by selecting it and clicking Delete.
Calibration sets are grouped by device and by color space. When you select a device from the Device
drop-down list, the dialog box shows a list of calibration sets for that device and the currently selected
color space. If necessary, select the appropriate color space from the Color Space drop-down list.
The list of color spaces contains all the color spaces in which a separations style is defined for the
device. For example, if the device has separations styles defined in the Monochrome and CMYK color
spaces, then you can create calibration sets in the Monochrome or CMYK color space.
Most entries in the Device list are direct output devices‚ imagesetters, platesetters, proofing printers
(and some preview options and file formats)‚but there are also special entries for Printing Press and
Tone Curves.
The ways in which you create and use calibration sets for these types of entry vary.
Direct output devices
The way to create the calibration set is to print and measure a calibration target, as described in
this chapter.
To use a calibration set, in the Edit Page Setup dialog box, you can choose any calibration set
that was defined for the current device and current color space, in the Calibration drop-down list.
The choice of separations style determines the color space. Although an imagesetter is not a
multi-color device, the calibration set for an imagesetter contains a calibration curve for each
color specified in the separations style, to take account of the different screen angles used for
these colors.

Navigator RIP version 9

User Manual

323

Calibration

Note: A special example is the CIP3 output plugin. Its behavior with respect to calibration is
like that of a printing press, because its purpose to provide ink-key data for use with printing
presses.
Printing Press

You can use this special device to calibrate the transfer from film to press. In general, you do not
create calibration sets for a press‚ though this would be possible, but expensive, once you had
created a calibrated output path to film or plate. A more common way of working is to adjust the
press to conform to one of the standard references such as SWOP (CGATS TR001) or a BVDFOGRA standard and to use the corresponding calibration profile as supplied with the RIP.
You apply a calibration set for the press that you are using by choosing its name in the Actual
Press drop-down list in the Edit Page Setup dialog box. You can also adjust a job prepared for a
different press; do this by choosing a supplied profile or measured calibration for that different
press in the Intended Press drop-down list, and making the normal choice for the press that you
are using in Actual Press.
Tone Curves

This special device allows you to make another set of color adjustments in addition to the device
calibration and press calibration. Typically, you might create a tone curve calibration by estimating the required change at one or two tonal values and then extrapolating and smoothing to
obtain the other data values.
You apply a tone curve calibration set using the Tone Curves drop-down list in the Edit Page
Setup dialog box.
For the special devices, Tone Curves and Printing Press, the Color Space listing contains all the color
spaces for which a profile exists.
To edit an existing calibration set, select it in the list and then click either Edit from uncalibrated target
or Edit from calibrated target, as appropriate.

12.11.1 List headings and entries
The column headings are the various properties of a calibration set. The first column in the list is the
name of the calibration set and the last column is the edited or unedited status of the calibration. Each
of the remaining columns in the list corresponds to one of the warning criteria in the Edit Calibration
dialog box.
The values in the columns for warning criteria show the intended values for use of each calibration set,
as set in the Edit Calibration dialog box. The RIP will warn you if you select the calibration set for a
Page Setup with conflicting values. You should create a calibration set for each combination of media
and settings for resolution, dot shape, range of screen frequencies, exposure, and negative/positive
that you expect to use with each kind of device. Use narrow ranges if you want high accuracy.
In the columns for warning criteria, you may see the following entries:
Shows that any value is allowed, so the RIP will not warn if you select the
calibration set. This corresponds to clearing the check box for the warning
criterion in the Edit Calibration dialog box.

(Any)

324

User Manual

Navigator RIP version 9

12.11

Calibration Manager dialog box

(n/a) (not applicable)

Shows that the type of entry is not relevant to the device. For example: Exp
(exposure) is (n/a) if the device does not support exposure control.
The individual columns are as follows, with the names used in the Edit Calibration dialog box following in parentheses.
Name

The name of the calibration set.

Resolution

The resolution setting.

Dot shape

The halftone screen dot shape or spot function.

Freq (Screen freq)

The halftone screen frequency.
Exp (Exposure)

The exposure setting, if software controllable by the RIP. For example, this
option is not available for the None or Preview devices.

+ / - (Use for Pos & Neg)

This tells you whether the calibration set can be used for both positive and
negative output, as set by the state of the check box labeled Use for Pos and
Neg in the Edit Calibration dialog box.
The possible entries are:
Y

if you can use the calibration set for both

N

if the calibration is for only one of positive or negative

Profile (ColorPro only) or Press 
Entries in the Profile column are n/a except when ColorPro is enabled, when

each entry shows which profile to associate with the calibration set. When
Printing Press is selected in the Device drop-down list, this column is labeled
Press, but the behavior is the same. The default calibration set is determined
by the selected profile.
Note: A profile is used in ColorPro options to define the color performance
of a combination of output device, media, and colorants.
If you create calibration sets in the RIP without ColorPro and subsequently
enable ColorPro, the RIP associates the Linear profile with the existing
calibration sets.
Status

The Status column tells you about the source and whether the current data for
the given calibration set came from an uncalibrated target or a calibrated target.
The possible entries are:

Navigator RIP version 9

C

for data from a calibrated strip

U

for data from an uncalibrated strip

User Manual

325

Calibration

E

if you have edited the data since entering the Calibration Manager

D

if you have viewed the default curve without editing it

See Establishing a workflow on page 313 for a discussion of why you might
use different types of target.
E is an important entry in the Status column because it shows that you have uncommitted changes for
that calibration set, which affects the valid commands and the values you see in the Edit Calibration
dialog box.

If you select a calibration set with status E, you can only further edit the values in the same way, so
only the edit button that you have already used on that set is enabled. If you edit the set, you see the
entries you made in the previous edit.
When you click OK or Select in the Calibration Manager, the RIP commits the changes in all edited
calibration sets. Once committed, the status reverts to C or U, both edit commands are enabled, and
you see the perfect curve when you next view the calibration curve using Edit from calibrated target.
(Perfect, in this context means linear only in some measurement systems.)
Once you have committed changes, the RIP can show you either the calibrated or the uncalibrated
curve, for any future updating of the calibration.
Note: The same calibration set can have status U or C depending on the last target (and the corresponding edit command) used to update it.

12.11.2 Buttons
Most buttons operate on multiple calibration sets. Only the two edit buttons require just one selected
calibration set.
Edit from uncalibrated target

Click this button to enter the Edit Calibration dialog box for an uncalibrated
target produced on an output device or printing press.
Edit from calibrated target

Click this button to enter the Edit Calibration dialog box for a calibrated target produced on an output device or printing press.

326

New

Click this button to create a new calibration set. You enter the Edit Calibration dialog box for an uncalibrated target with all Warning criteria boxes
empty. At least, you must name the new calibration set and provide data values.

Copy

Click this button to copy a calibration set. The RIP creates a new name for the
copy by adding characters (for example, ~[1] or ~[2]) after the original name.
If the name is longer than about 13 characters then you can see the added
characters only in the Name field of the Edit Calibration dialog box, where
you can also edit the name to be more meaningful.

User Manual

Navigator RIP version 9

12.12

Delete

Edit Calibration dialog box

Click this button to delete the selected calibration set or sets. The RIP generates a warning if the selected calibration set is used in a Page Setup.
Note: You cannot delete a calibration set if you open the Calibration Manager
from within the Edit Page Setup dialog box.

OK

Confirms the changes you have made and exits the dialog box.

Select

This button is available if you opened the Calibration Manager from the Edit
Page Setup dialog box and if a calibration set is selected.
The Select button confirms the changes you have made and closes this dialog
box. In addition, using the Select button displays the selected calibration set in
the Edit Page Setup dialog box.

Cancel

Closes the Calibration Manager, canceling all changes made since you displayed this dialog box.

12.12 Edit Calibration dialog box
Figure 12.5, page 311, shows the Edit Calibration dialog box.
There are various ways of entering this dialog box, and corresponding variations in its contents.

12.12.1 Entry methods and variations
There are three ways to enter the Edit Calibration dialog box, corresponding to buttons in the Calibration Manager:


New



Edit from uncalibrated target



Edit from calibrated target

These ways of entry allow you to follow most working practices. The choice is yours.
When you use the New or Edit from uncalibrated target buttons, the RIP creates a calibration curve
directly from the uncalibrated data values you enter.
When you use the Edit from calibrated target button, the RIP creates a calibration curve more indirectly. In some circumstances and with some devices, this indirect approach can lead to values that
never settle to an error too small to measure; you may find that the residual errors are acceptable or
you may prefer to use Edit from uncalibrated target.
One way of regarding the process for Edit from calibrated target is to say that the RIP uses the data values you enter from a calibrated target to detect imperfections in the existing calibration and adjusts the
calibration to remove them. Typically, these imperfections and the corresponding adjustments are
small (compared to those for uncalibrated targets) and may provide a better calibration curve than
working from uncalibrated targets. Another advantage of working from a calibrated target is that it
may allow the use of one fewer target‚ saving both time and media.

Navigator RIP version 9

User Manual

327

Calibration

The RIP is supplied with default calibration curves for some output devices, each curve representing
the linearized state of a typical device of the same kind. If you are using ColorPro, the default calibration set is determined by the profile. Without ColorPro, the RIP uses the Linear profile.
There are two special devices, shown in the Calibration Manager as Tone Curves and Printing Press.
When you edit a calibration set for one of these devices, the Edit Calibration dialog box offers slightly
different options (as described in Variations on the Edit Calibration dialog box on page 314).

12.12.2 Checks in the Edit Calibration dialog box
There are various checks on the validity of the calibration curves as you change settings or enter data,
and more as you exit the dialog box. The RIP displays an appropriate warning message if any of the
checks suggest a problem.

12.12.3 Warning Criteria panel
It is important to choose a calibration set that is appropriate for the job you are processing. If you set
the warning criteria for a calibration set, the RIP warns you if the settings in the Page Setup conflict
with these criteria. In addition, when processing the job, the RIP warns you if the settings in the job
conflict with those in the calibration set. By setting the Abort job if calibration is on, and the selected cal
set does not match job option in the Page Setup Options dialog box, you can tell the RIP to abort any job
that fails the criteria. See Abort if calibration on, and the selected cal set does not match job on page
138 for details. Otherwise the RIP displays the warning messages in the Navigator RIP window.
Most of the controls in this panel are paired: a check box and a setting control. To make the calibration
set apply to a particular value or limited range of values for the setting, select the corresponding box
and then enter the value or values. If you do not select the box, the setting is not tested and the
Calibration Manager shows (Any) in the column for that setting.
Note: If you create a calibration set from the Edit Page Setup dialog box, the RIP takes the default settings for the Warning criteria from the Page Setup you are editing.
The warning criteria are:
Profile (not illustrated)

This warning criterion is available only with ColorPro and appears only if
your output device has more than one profile available. There is no check box
associated with Profile: if present, the profile is always used as a criterion.
The choice of profile determines the default calibration set.
Press (not illustrated)

This drop-down list appears in the Edit Calibration dialog box only if you are
editing the calibration for a printing press. There is no check box associated
with Press: if present, the press profile is always used as a criterion. The
choice of press profile determines the default calibration set. If ColorPro is
not enabled, the RIP uses the Linear profile.
Resolution

328

User Manual

The resolution setting.

Navigator RIP version 9

12.12

Edit Calibration dialog box

Dot shape

The halftone screen dot shape or spot function.

Screen freq

The halftone screen frequency. You can enter the lower and upper limits of a
range of frequencies and choose the units in the accompanying drop-down
list.

Exposure

The exposure setting, if software controllable by the RIP.

Use for Pos & Neg

Select this box to show that the calibration set is suitable for both positive and
negative output. (This can apply only to monochrome devices.)
Also select the Negative media box if you are measuring from negative output,
and use the Measurements as drop-down list to show whether you are measuring with a positive or negative reading densitometer.

12.12.4 Other controls
Name

The name of the calibration set. If you alter the name shown here you are
renaming the set, not creating a new set.
This box is empty if you enter this dialog box by clicking the New button in
the Calibration Manager. You must enter a name before leaving this dialog
box.

Channel

This drop-down list contains the names of the channels defined in the calibration set. Depending on the device, there may be one or several channels. A
monochrome device has a single channel, while a color device has several
channels labeled with the names of the colors. For example: Cyan, Magenta,
and Yellow are possible channels for a 3-color device. If the output device can
support additional colorants, you can add a channel for a spot color. The
channel (Other colors in job) allows you to specify a calibration curve for any
spot colors that do not have a separate calibration curve. Note that although
an imagesetter is not a multi-color device, you can create a separate calibration curve for each color, to take account of the different screen angles specified in the separations style.
You must specify a separate calibration curve for each process color channel
to produce a valid calibration set. The RIP reminds you to view the data for
each channel to assess if it needs editing, as described in Exiting the Edit Calibration dialog box on page 333. Note that you can also Copy the data from
one channel to another channel.
The RIP does not allow you to change to another channel if the calibration
curve for the current channel is unreasonable. One example of an unreasonable curve is a non-monotonic one that rises but then falls before rising again.
In such a case, the RIP warns you and prompts you to correct the curve before
you can change to another channel.

Navigator RIP version 9

User Manual

329

Calibration

To add a channel for a spot color, click the Add button. In the Add Channel
dialog box, select the name of the spot color from the drop-down list and
click the OK button. The list of spot colors contains all the spot colors named
in the separations styles for the selected device and color space.

Add

Note that in the special case of the Tone Curves and Printing Press devices, the
list includes all the spot colors named in separations styles for any device in
the selected color space. This is because tone curve and press calibration can
be used with any Page Setup.
If the data for one channel is similar to another channel, you can copy the
data and then edit it, rather than having to enter it again. For example, to copy
the data from the Cyan channel to the Magenta channel, first select the
Magenta Channel and click the Copy button. Then, in the Copy Channel Data
dialog box, select the Cyan channel from the drop-down list and click the OK
button.

Copy

For some devices, for example with an imagesetter, you might feel that the
calibration of the black channel is also adequate for the color channels. In this
case, use the Copy command to copy the black channel data to the other channels.
You can delete any spot color channel from the Channel drop-down list by
selecting the spot color channel and clicking the Delete button. If you have not
defined any spot color channels, the Delete button is not available.

Delete

Measurements as

Use this drop-down list to declare what kind of measurements you are entering in the data boxes. The entries available in this drop-down list can vary
with the type of output device. Two examples are Status T, a standard measure
of absolute density, and % Dot, the area coverage of halftone output.
Note that if you choose to edit a different Profile which uses an alternative
measurement system, a Measurement system...not found warning is displayed
and the correct system for the newly chosen profile is automatically selected
in this menu.
Max density (not illustrated)

This control allows for conversion between percent dot and density. It
appears only for the Printing Press device and for ColorPro profiles that
require it to appear.

12.12.5 Values
You can enter values in any form offered to you in the drop-down list labeled Measurements as. Examples are:


Percent dot (0 through 100%)



Dot Gain (relative values expressed in  values from a perfect transfer curve)

330

User Manual

Navigator RIP version 9

12.12

Edit Calibration dialog box



Status-T Density



Visual or ISO Visual (which is the same as the Visual channel of Status-T)



L* (from CIE L*A*B*)

12.12.6 Test strips and data boxes for patches
Each output device can have its own pattern of test strip and there can be varying numbers of patches
on test strips for different devices. If the target uses fewer patches than the maximum (36) then the
remaining data boxes appear empty and unlabeled.
You can exit this dialog box only when all labeled boxes have entries. You can provide entries by typing, by using Extrapolate, or by using Import and a file of data values.

12.12.7 Controls
Negative media

Select the Negative media check box to show that you are measuring data from
negative output media. Leave it clear when you are using positive media.

Force solid colors

This check box is available only when you are using halftone devices. When
you select this box, any color in a job that uses the maximum density of any
channel is represented by the maximum amount of that colorant available on
the output device: this guarantees a solid color that is the maximum deliverable by the output device, rather than a lower density color (achieved by
screening) that calibration has established as 100%.
The default setting of this option is selected and should be left for work on
most presses‚ this will ensure that colors defined as solid in the incoming
PostScript language file will be imaged as solid. For Gravure work this
option should be unchecked.
This option does not apply to calibration test strips, only jobs.
For example, this is a desirable setting where you wish to avoid screening
black text, but using it means you do not have an exact colorimetric match for
the color when using ColorPro. See also the ColorPro User Guide.
Smooth

This button smooths the values near the ends of a curve: typically, to approximate a smooth curve where the limited resolution of a measuring device may
have truncated similar values to be the same.

Extrapolate

This button is enabled when you are calibrating for a printing press or when
the output device supports extrapolation. There also needs to be at least one
empty data value.
You can use Clear to empty all data values, enter a limited number of values,
and then press Extrapolate to have the RIP calculate the remaining values. A
typical source of values is a manufacturer data sheet, for example, giving
press gain in the form: a gain of 15% at 50%.

Navigator RIP version 9

User Manual

331

Calibration

In rare cases, extrapolation may not be able to produce a reasonable curve:
the RIP displays an error message to tell you if this has happened. (One
example of an unreasonable curve is a non-monotonic one that rises but then
falls before rising again.)
Clear

Click this button to clear all the boxes. This is intended as a preliminary to
entering data in a small number of boxes and using the Extrapolate button to
calculate values for the other boxes.

Reset

Reset deletes all entered data for the calibration set and displays the default

curves for the device (and profile, if ColorPro is enabled). For a multi-channel device, it resets all channels; not just the channel whose curve is
displayed.
Import

To import the data from a file rather than typing numbers into the boxes, click
the Import button. The RIP displays the Import Measurements dialog box,
shown in Figure 12.6.

Figure 12.6 Import Measurements dialog box

Note: The data in the file is provided in the correct format by a separate utility program, Genlin, which supports the use of various automated densitometers. See Appendix C, Using Genlin on page page 389 for details.
The import file contains measured data for some or all of the channels in the
calibration set. For each calibration channel, you can choose to import the
measured data for that channel, to import data that was measured for a different channel, or to leave the current data for the calibration channel
unchanged. By default, the RIP uses the measured data for a channel, where
available. If there is no measured data for a channel, the RIP defaults to the
(No Change) option.
The Calibration Channel column contains the names of all the process and
spot color channels defined in the calibration set, including the (Other colors in
job) channel, if appropriate. When you select the Channel drop-down list in
the Edit Calibration dialog box, you see the same list of defined channels.
(You can define a spot color channel using the Add button in the Edit
Calibration dialog box: see page page 330 for details.)

332

User Manual

Navigator RIP version 9

12.12

Edit Calibration dialog box

The drop-down list under the Measured Channel column contains the names
of all the measured channels in the import file, together with the (No Change)
option.
To change the setting for a particular calibration channel, select the corresponding row and then select the name of a measured channel or (No Change)
from the available list. For example, select the Yellow row and then select
Cyan from the drop-down list to import the data measured for the Cyan channel to the Yellow calibration channel. A more realistic example might be to
select an available measured channel, perhaps Default, for a Black or Gray calibration channel when the measurement file does not identify the data in the
way expected by the RIP.
Note: The RIP may detect a mismatch between the expected device, profile
or measurement system and display a warning dialog box. This protects you
from importing incorrect data.

12.12.8 Exiting the Edit Calibration dialog box
You must specify a separate and valid calibration curve for each process color channel to produce a
calibration set, unless you want to accept the default curve. The RIP carries out checks on the data
before it saves the calibration set.
If you exit the Edit Calibration dialog box without editing any calibration data, the RIP closes the dialog box and saves the calibration set with a status of D. This shows that you have viewed the default
curve without editing it.
If you have edited the data for one of the process color channels, but not all of them, the RIP warns
you and asks for confirmation that you want to exit without editing the other channels.
In this context ‘editing the data for a channel’ means at least viewing the data to assess if it needs editing. The RIP keeps a record of which process color channels you have edited and queries you if you
have not edited all of them.
For example, if you edit only the Cyan channel of a 4-color device, the RIP will query you about the
Magenta, Yellow, and Black channels. The following message is typical:
You have not viewed the following channels: Magenta, Yellow, Black. Finish editing anyway?

The RIP does not allow you to save an unreasonable curve. One example of an unreasonable curve is
a non-monotonic one that rises but then falls before rising again. If you try to save an unreasonable
curve, the RIP warns you and prompts you to correct the curve before you can save it.

Navigator RIP version 9

User Manual

333

Calibration

334

User Manual

Navigator RIP version 9

13
Color Separation
This chapter describes some basic concepts of color reproduction and the related parts of the Navigator RIP.
The concept of color separation is no longer restricted to producing separated output. When processing any job, the RIP creates a separation for each process colorant and also, where appropriate, for
spot colorants. The output format determines whether the separations are printed together as a composite, or separated. By configuring these separations you can control the printing of individual colorants in the job. Although there is only one separation in the monochrome color space, the RIP
provides the same options for configuring that separation.
Separations information is saved together with screening information in a separations style, which can
be used in several Page Setups. A separations style is defined for a specific device, color space, and
output format. Selecting a separations style in the Edit Page Setup dialog box determines the color
space of the Page Setup.
These are the related parts of the Navigator RIP:






The Separations Manager and Edit Style dialog box. See Creating and managing separations on
page 344 for details of the choices you make for all separations. (See Chapter 6, Screening for
details of the screening options for halftone separations.)
The Color Setup dialog box. See Color Setup on page 354. This dialog box contains the controls for black generation and undercolor removal, trapping, and overprinting.
Use of the Output Controller to view superimposed color separations. See Pages in the Output
Controller on page 366. The Output Controller is available in either of the multiple modes.

This chapter describes how you can define separations styles, while Chapter 5, Configuring Output
Formats, describes how you can choose different separations styles when producing output.

13.1 Introduction
To produce a color image, many reproduction systems take advantage of the fact that there are small
sets of colors that, when mixed in the correct proportions, can produce any of a very wide range of
other colors. For example, combinations of red, green, and blue inks (commonly known as RGB), or
cyan, magenta, and yellow inks (CMY), can between them produce thousands of different hues.
Color printing more commonly uses CMY colors, with the addition of a black ink to account for
imperfections in the printing process. This manual uses the term CMYK for the system of color repre-

Navigator RIP version 9

User Manual

335

Color Separation

sentation using these four inks (Cyan, Magenta, Yellow, and blacK). These inks are the commonly
used process colors. There are several other terms in common use, some terms using B for Black or
referring to the order of printing each ink by reordering the letters: YMCK, YMCB, and KCMY are
typical.
Black ink is used for several practical, economic, and quality reasons:


Black appears very often: for example, in text.



Black ink is cheaper than colored inks.





Mixing CMY inks produces an impure black, probably tinged with brown, and can result in
objectionable colored fringes on small objects such as characters in body text. Additionally,
one application of black ink replaces three applications of colored inks so drying time can be
reduced.
Black can be used to extend the range of colors and tints available from mixing CMY inks.

There are ways to improve reproduction quality or economy beyond the levels possible with CMYK
process inks. There are two general approaches: to vary the number of process inks (HiFi or N-color
printing), or to add spot colors. Each approach has its own advantages.

13.1.1 Alternative process color systems
N-color printing uses a different number of process colors: fewer for economy in simple jobs such as
forms printing or more for high quality. For high-quality printing, or HiFi color, at least two distinct
types of color schemes are growing in popularity: for convenience in this discussion we shall call
them distinct colorant and photo-ink.
Distinct colorant printing uses a combination of different process colors. For example, in the PANTONE Hexachrome Color Selector system there are six inks: cyan, magenta, yellow, black, orange,
and green. (Other schemes of six or seven distinct colors are possible but this system is well known.)
These colors are chosen as a set to provide a wider gamut than provided by colorants in the established
CMY or CMYK schemes so, for example, the cyan in a six-color system is unlikely to be the same as
the cyan in a typical CMYK system. To avoid confusion a different naming scheme is needed. There is
not a single fixed set of names: HexC or HexCyan are equally valid names for the cyan ink and may
be used by graphics applications creating jobs.
Photo-ink technologies use a different approach. There are different densities (light and dark versions)
of one or more colorants. A capable system is then able to use the light ink in highlight areas and the
dark ink where more colorant is required. A typical set of colors is light cyan, dark cyan, light
magenta, dark magenta, yellow, and black. As in distinct colorant systems, these are not the same inks
as used in the CMYK system and it is important to distinguish between the two systems. Various naming schemes are possible: a possible example is PhotoCyan Light, PhotoCyan, PhotoMagenta Light,
PhotoMagenta, PhotoYellow, and PhotoBlack.
The Navigator RIP provides facilities for screening and calibrating both of these color systems, but the
actual availability for use of a distinct colorant or photo-ink color space depends upon there being an
installed output plugin using the new software facilities. Also, some configuration of the files in which
the RIP stores colorant databases may be needed before first use. For example, the Navigator RIP
allows for jobs to use any of the different color naming schemes discussed for distinct colorant and

336

User Manual

Navigator RIP version 9

13.1

Introduction

photo-ink systems and to link these to the internal naming scheme used by the RIP. Each new naming
scheme requires some configuration.

13.1.2 Spot colors
Spot colors are used in a job when a particular color is used very heavily or must have a better quality
than is available by mixing the process colors. Typical uses of spot color include colored text, company logos, and colors that are outside the range available from mixing process colors. Spot colors
may also be used to define effects other than coloring: for example, to place varnishes and glues.

13.1.2.1 The PANTONE MATCHING SYSTEM

¬Æ

The Navigator RIP is able to make use of the PANTONE MATCHING SYSTEM. Colors are identified as M (matte), C (coated) and U (uncoated). For example, PANTONE 533 M, PANTONE 533 C, and
PANTONE 533 U. Previously, Pantone colors were identified as CV (coated) and CVU (uncoated). For
example PANTONE 533 CV and PANTONE 533 CVU.
From v8.0 The Navigator RIP is able to make use of the PANTONE Goe coated color system.
¬

¢

From v8.1 The Navigator RIP is able to make use of the PANTONE Goe uncoated color system.
Æ

All the Pantone Databases can be found in SW\NamedColor.
To use the PANTONE MATCHING SYSTEM the color names must match exactly the names used in
the job. For information on how to include color separations see Producing separations on page 349.
As previously stated, all the Pantone Databases are in SW\NamedColor.
The PantoneProcess database is found in the SW\NamedColor\Examples folder. To make this database
work, it must be referenced in one of the files in SW\NamedColorOrder. You do this by editing the Intercept, Recombine and Roam files. If you want to produce all Pantone colors by their CMYK equivalents,
put PantoneProcess before PantoneU in the files. Putting PantoneProcess at the end of the file (that is,
after PantoneMatte) will mean only the PC Pantone colors will be found (that is, PantoneU and PantoneV
colors will still be converted to XYZ).

13.1.3 Types of color jobs
There are two common types of color jobs:




All the color information is in one job. This is a full-color job, also known as a color composite.
The color information has been separated into a page for each color ink. This is a preseparated
job. These pages may be parts of one job or separate jobs.

Composite jobs offer the greatest flexibility in handling jobs and targeting them to different output
devices, but many workflows are built around preseparated jobs. The RIP can recombine many preseparated jobs, provided that the separations are supplied as one job. (Color PostScript language jobs
on page 343 and Preseparated jobs on page 343 describe the details of using composite and preseparated jobs with the RIP.)

Navigator RIP version 9

User Manual

337

Color Separation

13.1.4 Navigator RIP
This chapter describes how you can produce output from documents for use in CMYK color printing.
You can also produce output for other color systems, such as RGB and N-color, and output for jobs
that include spot colors. The Navigator RIP accepts either full-color jobs or preseparated jobs as input,
and outputs them correctly.
The Navigator RIP also provides some extensions to the PostScript language specification: for example, the ability to recognize spot colors in documents defined using the PostScript Level 1 language.

13.1.5 ColorPro
ColorPro extends the color handling capabilities of the RIP. For example, you can use ColorPro to
intercept CMYK color definitions and convert them to device-independent color using input profiles.
The extra facilities and changes of procedure associated with ColorPro are described in the separate
manual ColorPro User Guide.

13.2 What color separations are
Color printing using this color-mixing method is done using color separations. These are sets of single-color images that yield a full-color image when combined appropriately. Figure 13.1 shows how
four single-color images can be combined to produce an image in different colors. In this grayscale
figure, different shades of gray represent the various colors.
Separations produced in four process colors
Cyan

Magenta

Yellow

Black
The Magazine
a weekly review

Overlay process yields full color images
The Magazine
a weekly review

Figure 13.1 How separations can form a color image

338

User Manual

Navigator RIP version 9

13.2

What color separations are

The image in the figure shows the cover page of a fictional magazine. It is mostly black, but has a
small color illustration on the right that consists of some land (in green), over which there is a road (in
pure black), and in the sky (not colored) the sun (in pure yellow) is shining.
Color images are not produced from separations by mixing inks before application to the page.
Instead, the illusion of a full-color image is produced by seeing different proportions of the four inks
laid together on the page. Each separation adds one color component to the image; cyan, magenta, yellow, and black in turn‚ and, when they are overlaid correctly, they form a full-color image.
A color separation is, strictly speaking, a monochrome (that is, one color) image. It is called a color
separation because it is the result of separating one color from the others in the color system. For
example, the yellow separation in CMYK is a version of the image that shows only the yellow part of
it, separated from the cyan, magenta, and black. (You can control how colors will be separated from
the others in an image.)
Seen in isolation, a single separation may not look much like the full-color image of which it will form
a part but it is usually possible to identify some features of the final image. In Figure 13.1, the yellow
separation shows the sun, which is pure yellow. It also shows a small amount of yellow in the ground
part of the image, which will combine with the cyan separation to form the grass color. However, it
does not contribute to the road or the text, and so it is empty in those places.

13.2.1 Knockouts and overprinting
Suppose we have a very simple image that is a pure magenta background with a pure yellow square in
the middle. The separations produced will be those in Figure 13.4.
Separations for a yellow square on a magenta background
Cyan

Magenta

Yellow

Black

Figure 13.2 Color separations for a simple image, with knockouts

Since the yellow and magenta inks can portray yellow and magenta quite adequately on their own, the
cyan and black separations are empty.
The yellow separation shows a square in the middle and nothing else. The square signifies the presence of yellow in the image at that point. The magenta separation shows a white square on a magenta
background. So, magenta will be printed in every part of the image except for that square.
Because magenta will not be printed in the white square, only yellow will appear there when the separations are put together. This is important, since if magenta was printed there too, it would mix with
the yellow, and produce a square that was not pure yellow, but red. Equally, no other inks will overlap

Navigator RIP version 9

User Manual

339

Color Separation

the magenta background, because no separations other than the magenta one contribute any color to
that region.
An area of a separation that is made empty so that it does not interfere with a graphic object represented by a color or colors in other separations is called a knockout. This is because the colored area
has been knocked out of the separation.
One problem with using knockouts is that if the separations are not overlaid accurately enough, there
may be a white gap at the edge, as shown in Figure 13.3. This effect is the product of misregistering
the separations, that is, misaligning them when they are combined. Nevertheless, in cases where printing one ink on top of another would produce the wrong color, producing separations with knockouts is
essential. Generally, graphic and page design applications produce knockouts automatically.
Inaccuracies caused by misregistered knockouts can be overcome by using special printing effect such
as trapping. The RIP provides some support for trapping. See Trapping features on page 365.

Figure 13.3 Misregistered separations with white gaps

Suppose we have another simple image that is a pure magenta background with a black square in the
middle. Figure 13.4 shows the separations that can be produced.
Separations for a black square on a magenta background
Cyan

Magenta

Yellow

Black

Figure 13.4 Color separations for a simple image, with black overprinting

In this case, we do not need to make a knockout on the magenta separation, because the black ink
should be strong enough to overcome the influence of the magenta ink beneath it. So we may choose

340

User Manual

Navigator RIP version 9

13.3

Producing color images from separations

not to let the black separation cause a knockout in the magenta separation. This effect is called overprinting, and is the opposite of a knockout. Overprinting eliminates the risk of finding gaps in the final
output, but cannot be used unless the overprinted ink is strong enough to overcome the effects of the
ink or inks beneath it. When overprinting is not possible, trapping remains a possibility.

13.3 Producing color images from separations
In the RIP, depending on the output format, you can print separations together as a composite page,
colored separations, or each separation as a monochrome page.
If you print a set of monochrome separations for use in the printing process, these separations can be
put together to form a color image. The separations are carefully placed one on top of the other until
all the color details can be seen. How is this achieved?
Typically, color pictures do not consist only of areas drawn in full-intensity primary colors. Most of
the picture is usually be in various shades and tints. Most printing presses require screened halftones,
so these varying intensities are achieved by using halftone dots. Each separation, therefore, is usually
composed of a pattern of halftone dots. (See Chapter 6, Screening, for details of halftoning.)
In halftoning strategies, continuous tone gray or colored images are imitated by combining dots of different sizes and colors. They are combined in such a way that, to the human eye, they mix, and the
observer sees the intended color image.
To ensure that the colors combine correctly, the positions of the dots on each separation are calculated
carefully. The grids, or halftone screens, for each separation are aligned at different angles, to avoid
moirÐ© patterns.
Once each separation has been produced, the final image can be constructed by printing the separations directly on top of each other. The intermediate stages are progressive proofs. In the CMYK
model, this is usually done by printing yellow first, then magenta, cyan, and finally black. Figure 13.5
and the following figures show the stages involved when printing color in this way for the example
image in Figure 13.1, page 338.

Blank paper

Yellow separation

Yellow

Figure 13.5 Yellow separation

Figure 13.5 shows how yellow ink for the yellow separation is printed on blank paper. You can also
preview separation printing on screen in the RIP. See Roaming separations on page 366.
Next, the magenta ink for the magenta separation would be printed on the paper, but since the separation is empty for this image, nothing is printed.

Navigator RIP version 9

User Manual

341

Color Separation

Yellow

Magenta separation

Yellow + Magenta

Figure 13.6 Yellow and (empty) Magenta separations

Next, the cyan ink for the cyan separation is printed. To the eye, the pattern of cyan and yellow dots in
the area of land will appear green as simulated in Figure 13.7.

Yellow + Magenta

Cyan separation

Yellow + Magenta + Cyan

Figure 13.7 Yellow, Magenta, and Cyan separations

Finally, the black ink for the black (K) separation is printed. All of the separations have been combined, producing a full-color image as simulated in Figure 13.8.

Yellow + Magenta + Cyan

The Magazine

The Magazine

a weekly review

a weekly review

Black (K) separation

Full CMYK image

Figure 13.8 Yellow, Magenta, Cyan, and Black separations

13.4 How color separations are produced
Each job may specify color images in one or more different color spaces, for example: CMYK, RGB
(red, green, and blue), HSB (hue, saturation, brightness), or an N-color space. No matter how a job is
specified, the RIP separates that job into one output format, to suit the output device. Again, in this
discussion we will concentrate on CMYK separations as an example.

342

User Manual

Navigator RIP version 9

13.4 How color separations are produced

13.4.1 Color PostScript language jobs
Composite color jobs are not described as a series of separations. Instead, each object on the page is
described just once, in full color.
Importantly, the PostScript language method of describing color is device independent. That is, no
matter what color space is used to describe an image, it can be rendered on any properly color-calibrated output device that your RIP supports. The same color job can thus be used to produce, for
example, full-color output on an RGB color printer, or a set of monochrome separations ready to be
used in the printing process. Some devices, typically desktop printers and proofing systems, can
accept continuous tone input.
Note: If you have ColorPro available, you can apply it to CMYK separations as well as to color composite CMYK jobs. The separations must be suitable for use with the Recombine preseparated jobs
option described on page page 351.
The RIP can take full-color jobs as input, and interpret them once to produce separation information
for each color in the space. In CMYK, this creates four monochrome output pages, each corresponding to a different color separation. When the full-color image is to be produced, the colored parts of a
separation show where inks should be applied, and the white parts where not. Alternatively, the RIP
can print the separations together as a composite.

13.4.2 Preseparated jobs
Having the RIP produce separations from composite color jobs is not the only means of producing
separations. The job could be separated into one or more PostScript language documents before it
reaches the RIP. This might be done by the application program in which the job was composed, or by
a special separator program that took the output of the composition program and produced PostScript
language separations from it.
However, these methods are not optimal. If you preseparate the job, you commit yourself to printing
the job on a device that can recombine the separations it produced: the documents become device
dependent. A process that commits a job to a particular device is not desirable, because you may need
to output your job on a number of different devices. The RIP can recombine certain classes of preseparated jobs: see the description of the Recombine preseparated jobs option on page page 351 for details.
There some circumstances where you must use recombination with preseparated jobs in order to use
features of the RIP, and some of these circumstances apply even when you wish to produce separations. These features are:


Output to a composite proofing (or final output) device.



Color management, using ColorPro.



Trapping, with the in-built options in the RIP.



Output to progressive separations.



Output of separations in a different order.

All these features require the RIP to have access to the complete color of all objects on a page. To
ensure that this is possible for preseparated jobs, select Recombine preseparated jobs. Alternatively,
where other settings in the Page Setup prohibit recombination, select Reject preseparated jobs.

Navigator RIP version 9

User Manual

343

Color Separation

Note: Both colored separations and progressive separations require the output color space to match
that of the separations. For example, it is not possible to produce colored separations or progressive
separations from a job preseparated to CMYK if the output device uses the PhotoInk color space.
The RIPs separation facilities allow you to preserve device independence in your jobs right up until
you wish to interpret it for output on a particular device. However, you can present device-dependent,
preseparated jobs to the RIP if you wish, and it will process and output them correctly.

13.5 Creating and managing separations
Separations information is saved together with screening information in a separations style, which can
be used in several Page Setups. A separations style is defined for a specific device, color space, and
output format. Selecting a separations style in the Edit Page Setup dialog box determines the color
space of the Page Setup.
Separations styles are created and managed in the Separations Manager.

13.6 Separations Manager dialog box
The Separations Manager appears when you click the Separations Manager button in the Edit Page
Setup dialog box, or choose the Color > Separations Manager command.

Figure 13.9 Separations Manager dialog box

The Separations Manager displays a list of all existing separations styles for the current device, showing the name of each separations style, the corresponding color space, and the output format.
To display the list of separations styles for a different device, select a device name from the Device
drop-down list. When you use a device for the first time, the RIP generates a set of separations styles
for that device. Some devices can support simple styles only. Others, like TIFF, can produce many different styles, so the names of the styles are chosen to avoid ambiguity.
You can edit these separations styles to suit your installation or create new ones.

344

User Manual

Navigator RIP version 9

13.6

Separations Manager dialog box

13.6.1 Controls and actions
The controls below the list allow you to create separations styles, and to edit, copy, or delete existing
separations styles.
Edit

Select a separations style and click this button to edit it in the Edit Style dialog box. A shortcut is to double-click a separations style.
Note: To rename a separations style, copy it and save the copy with the
desired name, before deleting the original.

New

Click this button to create a new separations style. The New Style dialog box
appears, as described in New Style dialog box on page 346.
Once you have set the color space and output format, you cannot change
them for the named separations style.

Copy

Select a separations style and click this button to edit a copy. The New Style
dialog box appears, as described in New Style dialog box on page 346.

Delete

Select one or more separations styles and click this button to delete them
together. You cannot delete a separations style if it is used in a Page Setup.
You cannot delete the only separations style in a list.

Select

This button is available if you opened the Separations Manager from the Edit
Page Setup dialog box and a separations style is selected.
The Select button confirms the changes you have made and exits the dialog
box. In addition, the Select button displays the selected separations style in the
Edit Page Setup dialog box.

You can also select separations styles and reorder them by dragging them to new positions in the list.
The order in the Separations Manager is the order of appearance in menus where you choose a separations style.

Navigator RIP version 9

User Manual

345

Color Separation

13.6.2 New Style dialog box
The New Style dialog box appears when you click the New or Copy button in the Separations Manager.
Note: If you clicked Copy to display this dialog box, you can change only the style name: this ensures
that the new style is a true copy of the original. Once you have named the copy and clicked Create, you
can modify individual settings in the Edit Style dialog box.

Figure 13.10 New Style dialog box
Style name

Type in a name for the separations style. The style name must be unique and
can be up to 30 characters long.

Color space

Select the color space from the drop-down list. You can select any color space
known by the RIP, not just the color space of the target device. Monochrome,
RGB, and CMYK are always available. If you have installed an N-color
device, you can also use its color space, even if you are not printing to that Ncolor device. This choice determines the process colorants specified in the
separations style. The output format specifies how the colorants will be
printed on the output device.

Output format

Once you have selected the color space, select an output format from the
drop-down list. This specifies how to generate the output on the target device.
The available options depend on the selected output device and the setting for
Color space. For example, with a typical CMYK device operating in its own
color space, you can generate output as monochrome separations, as colored
separations (either single or progressive proofs), or as a composite. For an
RGB output device, you can convert CMYK or N-color separations to RGB
output, and so on. When an arrow appears in the output format name, it indicates that the color space does not match that of the output device.

Note: Once you have set the color space and output format, you cannot change them for the named
separations style.
Click the Create button to open the Edit Style dialog box, described in Edit Style dialog box on page
347. Click Cancel to discard your changes immediately.

346

User Manual

Navigator RIP version 9

13.7 Edit Style dialog box

13.6.3 Selecting several separations styles
You can select multiple separations styles when you want to delete or reorder them. Use the following
keys:


Shift


To select a block of separations styles that appear together in the list, select the first style in the block,
then, while holding down the Shift key, select the last style in the block.


Ctrl


To select several separations styles, regardless of whether they form a continuous range, hold down
the Control key while selecting the styles you wish to delete.

13.6.4 Closing the Separations Manager
You must close the Separations Manager before you can use any tool bar buttons or menu options in
the RIP.
Click OK to confirm all the changes you have make in the Separations Manager and Edit Style dialog
boxes. The OK button saves the changes you have made and closes the Separations Manager. If you
opened the Separations Manager from the Edit Page Setup dialog box, you can also save the changes
by clicking the Select button. In addition to saving the changes, the Select button displays the selected
style in the Edit Page Setup dialog box. Click Cancel to discard all changes.
Note: If you open the Separations Manager from the Edit Page Setup dialog box, changes that you
make in the Separations Manager are independent of the Edit Page Setup dialog box. For example, if
you create a separations style, and close the Edit Style dialog box with OK, and the Separations Manager with OK or Select, the new style will remain even if you click Cancel in the Edit Page Setup dialog
box.

13.7 Edit Style dialog box
The Edit Style dialog box appears when you create or edit a separations style in the Separations Manager. It contains the options related to separations and, where appropriate, to screening. There are two
forms of the dialog box:




If the output format of the separations style supports screening controlled by the RIP, the Edit
Style dialog box contains options that allow you to set up defaults and override the screening
parameters requested in a job. See Chapter 6, Screening for a description of these screening
options: try starting with Figure 6.2, page 149.
Otherwise, a more compact dialog box displays only the options for separations, as shown in
Figure 13.11. This form of the dialog box suits contone output and also output to devices and
processes that do their own screening.

The remainder of this section describes the separations options appearing in both forms of the dialog
box.

Navigator RIP version 9

User Manual

347

Color Separation

Note: There are also controls for black generation for CMYK output and overprinting in the Color
Setup dialog box, accessed from the Color Setup Manager or the Separations, Screening, and Color section of the Edit Page Setup dialog box. (See Color Setup on page 354.) Also, trapping options are
available from the Separations, Screening, and Color section of the Edit Page Setup dialog box. (See
Trapping features on page 365).

Figure 13.11 Edit Style dialog box

This dialog box contains a list showing the separations that the RIP can produce. There are initially
separations for the process colors in the selected color space. In Figure 13.11 there are separations for
the four process colors in the CMYK color space.
If the chosen output format supports additional colorants, you can control the printing of spot color
separations using the (Other colors in job) entry, or you can add a separation for a specific spot color.
You can rename or delete spot color separations. You cannot delete the standard process color separations from the list, nor can you change their names. You may, however, ask the RIP not to produce a
certain separation.
For particular jobs, you may want to vary the settings in the interests of efficiency or to ensure compatibility with PostScript language code that uses Level 1 operators. For example, the default settings
produce separations for all process colors, so you may want to turn off some process colors if a job is
mainly defined in spot colors. Also for example, if you need to reprint just a single separation (and it is
not saved in the Output Controller), you can turn off all the other separations.
The Print option in the Edit Style dialog box determines which separations are produced. The RIP produces all those separations marked as Yes and the non-blank separations marked as Not Blank.
Note: If you are printing a preseparated job, and you wish to not produce some separations, select
Recombine preseparated jobs, even if you then wish the RIP to produce output separations. The RIP
produces all separations of a preseparated job except when recombining.
If you are producing screened separations, you can control the screening of process and spot colors by
using the screening options in the Edit Style dialog box. See Chapter 6, Screening for a description of
these options.
Note: The separations shown in this dialog box always take effect for jobs that do not specify their
own separations. If the job attempts to specify separations, you must select the Override separations in
job check box if you want to produce the separations shown here.

348

User Manual

Navigator RIP version 9

13.7 Edit Style dialog box

13.7.1 Producing separations
The boxes below the list of separations allow you to control the printing of process color separations
and change the ink type. If the chosen output format supports additional colorants, you can also control the printing of spot color separations. Any spot color not explicitly listed is controlled by the
(Other colors in job) settings. With the default settings, if a job calls for spot colors not named in the list
of separations, the RIP converts those spot colors to the appropriate combination of process colors.
To change the settings for an existing colorant, select the colorant from the list and edit the values in
the boxes below.
Note: If the output format of the separations style supports screening, you can also change the screen
angle of the process color or spot color separation. See Section 6.5.1, Changing angles for separations
for details.
Separation

The name of the separation. To rename a spot color separation, type the new
name into the text box. You cannot rename process color separations.
Warning: The name you enter for the spot color must match the one used in
the job in every respect: upper and lower case, use of embedded space characters and any trailing CV or CU suffixes. For example: a typical Pantone
specification is PANTONE 386 CV but applications may report this in different
ways.

Print

If this option is set to Yes, a page will be produced for the separation, even if
the separation is blank. If this option is set to No, the page will be omitted,
although any effects it might have on the others are still calculated. You
might use this feature to suppress process color separation for a job using
spot colors only. If the option is set to Not Blank, the RIP will produce a page
for that separation as long as the separation is not blank.
For example, to produce only the process colors and convert all colors
defined as spot colors in the job to process colors, set each process color to
Yes and set (Other colors in job) to No. These are the default settings.
To produce a separation for every spot color requested in the job and for each
of the process colors, set each process color to Yes and set (Other colors in job)
to Yes. Then any calls for unlisted spot colors in a particular job mean that the
RIP produces the required separations automatically for that job.
Warning: When Simple Imposition is being used, the Print option must be
set to Yes if you wish to see color patches on either the proofing or the plate
colorbars. Using the Not Blank option will omit color patches for that color.
If you want to produce a separation for a specific spot color and to convert all
other spot colors which may be included in the job to process colors, set the
specific spot color to Yes and set (Other colors in job) to No.
Of these ways, the one you choose is likely to be dictated by the characteristics of your output device and process, such as the number of inks available in
one pass.

Navigator RIP version 9

User Manual

349

Color Separation

This box appears only if you are editing a halftone (screened) style. Enter the
screen angle you want to use for this separation. See Screen angles on page
154 for more details of screen angles.

Angle

Note: This box defines a default value, used if the job does not set its own
screen angles. If you wish to use angles entered here even when the job
requests other values, select the check box Override angles in job, also in this
dialog box.
Note: If you have one of the optional TrapPro features enabled, you can create sets of trapping rules
and apply them within the RIP. From the Eclipse Release of the Navigator RIP, the ink set options
have been removed from the Edit Separations dialog and placed within their own Ink Set Manager.
TrapPro and the Ink Set Manager options are fully described in the separate TrapPro User Manual.
Use this button to add a separation for a spot color to the list. A new row
appears in the list of separations. Type the name of the spot color into the first
text box below the list, to replace the text New Color. If required edit the settings for Print.

New

Warning: The name you enter for the spot color must match the one used in
the job in every respect: upper and lower case, use of embedded space characters and any trailing CV or CU suffixes. For example: a typical Pantone
specification is PANTONE 386 CV but applications may report this in different
ways.
Use this button to delete the selected spot color separation. The separation
disappears from the list. You cannot delete process color separations.

Delete

13.7.2 Other options
There are some other controls in the Edit Style dialog box, not linked so closely to individual separations.
Override separations in job

The separations shown in the Edit Style dialog box always take effect for jobs
that do not specify their own separations. If the job attempts to specify separations, you must select the Override separations in job check box if you want
to produce the separations shown here.
Use Level 1 spot colors

Spot color is not a standard part of the PostScript Level 1 specification. It is a
widely used convention that was defined later. If you wish to separate composite jobs using this spot color convention, select this box.
Warning: We strongly advise you not to select this box when defining a separation style to which you will supply preseparated jobs. The box is only
enabled if you using a CMYK separation style and not recombining, but you
might use a style with these settings and submit preseparated jobs in order to

350

User Manual

Navigator RIP version 9

13.7 Edit Style dialog box

override screen angles or other settings. (You cannot select this box when you
are using a monochrome separation style or you have selected the Recombine
preseparated jobs box.)
When you select this box, the RIP converts conventional representations of
spot colors in PostScript Level 1 language documents to the current PostScript Language compatibility level. By default, the RIP converts the spot colors to LanguageLevel 3. To convert the spot colors to LanguageLevel 2 style,
change the PostScript Language compatibility level in the Page Setup Options
dialog box.
This check box has an effect only when producing spot colors.
Override angles in job

This box appears only if you are editing a halftone (screened) style. Select
this box if you want to ignore any screen angles set in the job. See Screen
angles on page 154 for more details.
This option is automatically selected when Recombine preseparated jobs is
checked.
Reject preseparated jobs

If you select the Reject preseparated jobs check box, the RIP will not process
preseparated jobs. If this check box is selected, then the Recombine preseparated jobs check box is disabled.
Recombine preseparated jobs
The Recombine preseparated jobs check box allows you to recombine certain

classes of preseparated jobs. Recombining may be useful or necessary in a
variety of cases: for example, when proofing on a full-color device or retargeting from one kind of final output device to another kind. See Recombination on page 351 for details of the suitable jobs.
From Eclipse Release SP3, this option will activate Recombine 2.
Note: When using this option, the RIP cannot paint partial page buffers;
expect jobs with pages requiring large amounts of memory to fail if you have
not allocated enough physical memory. Also when Recombine is enabled the
PDF Retained Raster feature is disabled and a warning message is displayed.

13.7.3 Recombination
From the Navigator RIP Eclipse Release a single method of recombination known as Recombine 2 is
used. Recombine 1 is replaced completely with Recombine 2 which uses both object and raster methods where appropriate.
Recombine version 2 provides the following main benefits:


Improved accuracy of object placement.



Improved accuracy of the recombined color.

Navigator RIP version 9

User Manual

351

Color Separation




Considerable performance improvements for complex jobs.
Improved accuracy of color management‚ color management happens after overprints and
recombination has occurred.

The additional functionality may result in a performance overhead proportionate to the area covered
by those objects present in separations which are not being output and instead converted to process.
Recombine 2 is active as the default.
There are some limitations on the jobs that the RIP can recombine. There are also some classes of jobs
where you should make additional settings.
Note: When Recombine is enabled the PDF Retained Raster feature is disabled and a warning message is displayed.
The limitations listed below apply to Recombine 2:






The job must consist of process separations, suitable spot colors, where suitable is defined in
this section, or both. (It is also possible to submit most composite jobs to a Page Setup using
recombination, but see the comments in Recombination and composite jobs on page 353. This
ability minimizes the number of Page Setups that you must create and maintain but has no
intentional effect on the composite jobs.)
The names of suitable spot colors must be unambiguous. If the job supplies a CMYK equivalent for a spot color and the name is recognized by the RIP, that is sufficient for use with
recombine.
When the job does not contain a process equivalent for a spot color, recombine can still be used
if the RIP can find a correct equivalent name in a RIP named color database. The RIP searches
several files in the SW/NamedColor folder for an equivalent. These files define several commonly used names, including: other process colors, such as Red, Green, and Blue; spot colors
produced by some common job-creating applications; and the CV and CVU names defined in
PANTONE Colors.
Note: Some common names‚ for example, Pink or Mauve, can have slightly varying definitions
in different jobs, because either the creating application or the designer has used a conflicting
definition. One solution is to add a CMYK equivalent in the job where such a name occurs.
In short, CMYK equivalents for spot colors must exist either in the job or in a RIP named database.





352

The job must contain all the required separations in one file or AppleTalk connection. It is not
possible to recombine jobs where each separation is in its own file.
Where the job contains more than one set of separations, separations from each set (or page)
must appear contiguously‚ for example each page (or set) should appear in the order,
KCMYDE (where D and E represent spot colors). That is, KCMYDE for the first page,
KCMYDE for the second page and so on. The pages must not appear ordered by colorant. For
example: the order KKK‚¶CCC‚¶MMM‚¶YYY‚¶ DDD‚¶ EEE‚¶ is not allowed. Where there is
only one set (or page) of separations in the job, the order of separations in the job is unimportant: for example, CMYKDE and KCMYED are both acceptable.

User Manual

Navigator RIP version 9

13.7 Edit Style dialog box



When Recombine is enabled and a preseparated PDF job is provided that contains SeparationInfo objects (a dictionary containing color separation information for the page from PDF v1.3),
the RIP will treat each set of separations as a logical page. For example, a job containing 16
separations of CMYK, CMYK and so on, is handled as four (recombined) pages. If SeparationInfo is missing or Recombine is disabled, the RIP will treat the job has having 16 pages.

The additional settings for recombined jobs are:


The Override angles in job option is automatically selected when Recombine Preseparated jobs is
selected. It is highly recommended you leave it selected. In the Edit Style dialog box set the
angle you require for each separation. See Screen angles on page 154 for details.



It is highly recommended that the Override dot shape in job option is selected.



It is highly recommended that the Override frequency in job option is selected.



You can also override other screening features if you wish.

Note: Multi-page imposition cannot be used with recombine. However, Crop Marks, or other uses of
the One-Up, single-sided imposition scheme, (for example, when adding a color bar), can be used with
recombine.

13.7.4 Recombination and composite jobs
Recombination is a powerful capability of the RIP. In many cases, it is possible to submit both composite and preseparated jobs to a Page Setup that has Recombine preseparated jobs selected. However,
there are cases where the nature of the job or other settings made within the RIP mean that it is necessary to create separate Page Setups for composite and preseparated jobs.

13.7.5 Recombine 2 issues
This section contains points to note when using Recombine v.2. It uses much of the same code as is
used for PDF 1.4 Transparency and therefore has similar issues:








Color management of DeviceRGB colors with equal color values, that is R=G=B, are color managed using the CMYK input profile and not the RGB input profile for all object types except
images and shaded fills.
When recombining preseparated files the Overprint process colors options have no effect, even if
selected.This means that the OverprintProcess, OverprintWhite, OverprintGray and OverprintBlack
user parameters are not applied to recombined objects. Instead, the overprint effect is equivalent to the result of outputting the separations of the job on a press. That is, the separations are
individually processed (without recombine) and the results are overprinted‚ much the same as
using ROAM for all separations for a given page together.
When recombining composite files (that is, composite files that have been input to a recombine
setup), the settings of the Overprint process colors options in the GUI are obeyed.
If composite jobs are put through a recombined setup using Recombine v2 and color management, the color management is implemented after any compositing for transparency and after
any overprints have been resolved.

Navigator RIP version 9

User Manual

353

Color Separation

13.7.6 Closing the Edit Style dialog box
You must close the Edit Style dialog box to save your changes. You must also close the Separations
Manager before you can use any other part of the RIP.
Click OK to confirm all the changes you have made in this use of the Edit Style dialog box, including
any deletions. This confirmation is provisional: you must also click OK or Select in the Separations
Manager to finally save your changes. Click Cancel to discard your changes immediately.

13.8 Color Setup
If you wish to create a setup with Color management including, ICC profiles, custom rendering intents
or perform press emulation on a proofer, you should use the ColorPro option. This option is activated
by a password and you should contact your dealer for more information.
If you do have ColorPro activated in your RIP and you wish to create a setup with color management,
you should consult the ColorPro User Guide.

13.8.1 Define color setups (no color management)
Follow these steps to create a customized color setup. Note that a color setup corresponds to a particular device and color space.
1. Choose Color > Color Setup Manager. The Color Setup Manager dialog appears.

Figure 13.1 Color Setup Manager dialog box

2. In the Color Setup Manager dialog box, select the device for which you want to create a color
setup. If you are creating CMYK Separations (halftone), you should select Printing Press in this
option.
3. If necessary, select the color space for which you want to create this color setup. Note that when
you create a Page Setup, the separations style you choose determines the color space of the Page
Setup.

354

User Manual

Navigator RIP version 9

13.8

Color Setup

4. At this point you have the option to select either, New No Color Management setup, or New
ColorPro setup (which is only available by use of a password). If you can select New ColorPro
setup, you should consult the ColorPro User Guide for more details.

Figure 13.2 New Color Setup dialog box

The following tables describe the options available in this dialog.
Table 13.1 Input Document Controls in the New Color Setup dialog box

Fields
Override color
management in job

Description

Select this check box to override any color management
supplied in the job and use the options set in this dialog
box.
If you do not check this box, the Navigator RIP searches
the job for a color space array, embedded ICC profile, or
a color space resource. If there is such an element, the
Navigator RIP uses it to transform the relevant object on
the page and then treats the object as defined in deviceindependent color. See Appendix B, Jobs Containing
Color Management Data for details.
Note: A PDF/X-3 file containing an OutputIntents dictionary will be color managed using the ICC profile indicated by the OutputIntents dictionary, as long as the job
uses a device independent color space and the Override
color management in job option is not selected.

Navigator RIP version 9

User Manual

355

Color Separation

Table 13.1 Input Document Controls in the New Color Setup dialog box (Continued)

Fields
Override overprint
mode in job

Description

A PostScript language operator called setoverprintmode
which is the PostScript language equivalent of the PDF
gstate OPM flag.
If an object is set to overprint and OPM or
setoverprintmode is on, the Navigator RIP drops any colorants which have a zero value. This is called implicit
overprinting.
If the Override overprint mode in job option is checked, the
Overprint process colors option (described below) is
always honored and any overprintmode and OPM parameter in the job is ignored. If it is not checked, any overprintmode and OPM parameter in the job will be used and
the Overprint process colors setting will be used as the
default value.

Overprint process
colors

If this option is selected and overprinting is switched on
for an object, the RIP overprints any process color
component defined as 0 in the CMYK color space, or as 1
in the RGB color space. That is, the component is treated
as transparent.
When this option is not selected, a process color component produces a knockout on the separation. However, if
overprinting is switched on for an object, the RIP overprints colorants that are explicitly set to overprint using
the extension to setcmykcolor.

Drop white objects

When Overprint process colors is selected, Drop white
objects determines how the RIP handles white objects:
objects defined as 0 0 0 0 setcmykcolor, 1 setgray, or
1 1 1 setrgbcolor.
If this option is selected and overprinting is switched on
for that object, the white object simply disappears from
the separations.
If this option is not selected, the white object knocks out
underlying objects, even when overprinting is
switched on.
By default, this option is not selected.

356

User Manual

Navigator RIP version 9

13.8

Color Setup

Table 13.1 Input Document Controls in the New Color Setup dialog box (Continued)

Fields

Description

Overprint grays

Select this object to enable the Cyan, Magenta, and
Yellow colorants to be overprinted rather than knocked
out when a color is specified as gray (with the PostScript
language setgray operator or spot color converted to a
gray level) and the job requests overprinting. This
behavior is not defined by the PostScript language, and
though it is unusual for a job to rely on it, sometimes a
job will assume this, especially when the gray tint arises
from a named Black spot color which is converted to
process.

Overprint gray
images

Overprint behavior changed from Navigator RIP version
4.1 to 5.x and beyond. While the old behavior is deemed
incorrect, there is a desire to selectively use the old
behavior because of the un-predictability of some graphic
applications and to provide for end-users the ability to
handle legacy work.
The user parameter is called OverprintGrayImages, with a
default of true which when set overprints gray images. If
it is set to false, gray images will knock out of CMY
backgrounds.

Overprint 100%
black

When this option is selected, the RIP overprints 100%
black rather then generating knockouts in the other separations. The black channel or separation is generated as
normal but, depending upon the characteristics of the
other inks, may need to be applied last in the combination
process so that it overprints all colors necessary. If this
option is selected, overprinting occurs regardless of
whether overprinting is switched on for that graphics
object. How the overprinting of the other separations is
done depends on the Image only black option.
There is no performance penalty incurred by using this
feature in fact, it may be slightly faster to overprint, given
that knockouts do not have to be calculated.
This feature only applies to black objects, not to individual pixels of a continuous tone image that happen to
be 100% black.

Navigator RIP version 9

User Manual

357

Color Separation

Table 13.1 Input Document Controls in the New Color Setup dialog box (Continued)

Fields

Description

Image only black

This option controls whether solid black objects appear
in the process color separations other than Black when
the Overprint 100% black option is selected. If this box is
selected, the RIP ignores the other process color components of black objects and no trace of the objects appears
in those separations. If this box is not selected, then the
other process color components are taken into account. If
this box is not selected, the objects appear in any separation where the color component is defined as non-zero in
the CMYK color space (or not 1 in the RGB color space).
Process color components defined as 0 in the CMYK
color space or 1 in the RGB color space are always overprinted.

Use late color
management

Color management modules prior to version 7 instigated
color management at the front-end of the process, (with
the exception of recombine jobs where color management was applied at the back-end of the process). Applying late color management gives better quality results
with blended colors.
Note that late color management is disabled when calibration strips are printed.
See Notes on Use late color management on page 360 for
more information.

Table 13.2 Input Separation Detection angles in Job options in Color Setup dialog box

Fields

Description

Detect input separations by screen angle

The RIP sometimes needs to identify which colors are
represented in jobs: for example, when recombining a
preseparated job. Most pre separated jobs have PlateColor comments. Therefore, separation detection by
angle has been turned off by default. Where there is not
an obvious identifier, most likely in legacy jobs, the RIP
can use the screen angle as one of the items that the RIP
analyzes.
Turn this option on to detect separations by screen angle.

358

User Manual

Navigator RIP version 9

13.8

Color Setup

Table 13.2 Input Separation Detection angles in Job options in Color Setup dialog box

Fields
Cyan
Magenta
Yellow

Description

The angles specified in these fields help the ColorPro
application detect the individual plates within a job. The
default angles will usually work.
If you do change one of these values, for example Cyan
to 30 , and the incoming job has Cyan at 15 , you will
encounter problems.

Black

0

0

Table 13.3 Output Controls for RGB options in the New Color Setup dialog box

Fields
Black generation

Description

This is the process of computing how much, and where,
black should be added to the image.
This option determines how much black ink should be
used to reproduce colors. Select Ignore, Minimum, Light,
Medium, Heavy, Maximum or UCR from the menu.
Undercolor removal (UCR) is the process of reducing
the amount of other colors present where the black is
added.

Override black
generation in job

Rarely, a job will specify black generation itself. You can
force the scheme set in the Color Setup dialog box to
override those set by the job, by selecting this check box.

Max. ink

This value constrains the maximum amount of all four
CMYK colors that will be generated in the conversion
process. Similarly, colors specified explicitly as black are
not affected by this.

Max. black

This value is the maximum amount of black ink that will
be generated by the color conversion process. Note that
colors specified explicitly as black are not affected by
this setting.

Convert RGB to true
black

Some applications, and especially Microsoft Word, use
RGB colors for everything, including solid black, coded
as 0 0 0 setrgbcolor (or 0 0 0 in a DeviceRGB color space).
You should choose this option to force the RIP to intercept blacks coded in this way and convert them to (0 0 0 1
in) a CMYK color space.

Navigator RIP version 9

¬Æ

User Manual

359

Color Separation

After setting options in the New Color Setup dialog box, click Save As and assign a name to this color
setup. The Color Setup Manager dialog box displays the new color setup that you have created. Note
that you can also Edit, Copy, and Delete color setups from the Color Setup Manager.
5. Click OK to confirm all the changes you have make in the Color Setup Manager and New Color
Setup dialog boxes.
The OK button saves the changes you have made and closes the Color Setup Manager. If you opened
the Color Setup Manager from the Edit Page Setup dialog box, you can also save the changes by clicking the Select button. In addition to saving the changes, the Select button displays the selected color
setup in the Edit Page Setup dialog box. Click Cancel to discard all changes.

13.8.2 Notes on Use late color management
The Use late color management option has been introduced in Navigator 7 to overcome problems with
color managing blended colors. In this context, blended colors means both the compositing of transparency in PDF jobs, and also the overprinting of opaque objects in PostScript language and PDF
files.
In order to color manage blending correctly, the blending must be performed in the same color space
that the designer worked in when creating the job. For example, SWOP with a range of Pantone colors. In theory, if this type of job is printed on a SWOP press that supports all the Pantone colors
present in the job, the rendering of the blends will be correct.
Problems arise when the job is printed to a device with different characteristics to the color space the
designer worked in. A typical usage is the need to color manage the job when printing to a proofing
device. In this case, to reproduce the blending the designer intended, the blending should be performed in SWOP and result then color managed to the proofing device. Historically, this has been difficult to do accurately without using a form of ‚ double pass RIP processing. That is, the job is RIP
processed once to (for example) TIFF, in which the blending is in SWOP. The second RIP pass then
color converts the TIFF and outputs the result to the proofing device.
When the Use late color management option is off, the Navigator RIP will perform color management of
colors in the job before blending of either transparency or overprints. The RIP performs blending by
using the available information to make a best guess at the blended colors, but at a late stage in the
RIP process and without full knowledge of the color values and other graphics state attributes. This
method usually makes the blended regions visible, although they are not correctly color managed.
And if spot colorants are converted to process colors, overprinting of these objects is disabled by
default.
When the Use late color management option is selected, color managed blending is performed in a single pass of RIP processing with its obvious efficiency benefits. The Use late color management option
is available on both ColorPro and No color management color setups.
The option is available in No color management setups to achieve better rendering of overprinted spot
colors. For accurate proofing of jobs containing transparency and/or overprints, it is recommended
that the Use late color management option is used.

360

User Manual

Navigator RIP version 9

13.8

Color Setup

Please note the following points when using late color management:











The definitions of tint transforms of spot colors in the job (which are used to derive the CMYK
equivalents) will only be used to derive the CMYK equivalent of the 100% color value. Tints
will be rendered with CMYK values derived from the 100% spot.
If a job contains multiple color spaces of the same spot color, and where there are multiple definitions of the tint transform, only the first tint transform encountered will be used; as above.
Special treatment of DeviceRGB and device independent colors in the job is currently required.
That is, the RIP will first color manage these color spaces to a CMYK color space defined by
the CMYK input profile. If this is not defined, or a No color management setup is used, SWOP
(CGATS TR001) will be used. The downside of this method is that the CMYK input profile may
restrict the gamut of the colors in the job for these color spaces to less than the gamut of the
output device.
Late color management is forced on when used with recombine and also when outputting to a
DeviceN device, such as a Hexachrome device.
Late color management is disabled when calibration strips are printed.
Using the Preserve 100% process black option at the same time as Use late color management will
sometimes give undesired results.

13.8.3 Overprinting controls
Where 100% process black is present and in other circumstances, you may wish to perform overprinting rather than causing knockouts in the other separations. This applies both to composite color output
and to screened output. (See Knockouts and overprinting on page 339 for an introductory discussion.)

13.8.3.1 Color managed overprints for DCS
DCS (Desktop Color Separation) jobs that contain spot color data must be overprinted for good quality output. If the output device does not support those spot colorants, the resulting output will be inaccurate, with a warning that the spot color is missing.
With the introduction of backdrop rendering the RIP has the ability to interpose a virtual device which
does support those spot colors, and where correct overprinting will result. The RIP can then color convert the backdrop to the final output producing accurate results.
A way of using backdrop rendering is to set Recombine within the RIP user interface. For more information see Recombination and composite jobs on page 353. You should note that RIP performance is
affected by backdrop rendering because the RIP implements color managed overprints by compositing
rather than direct rendering.

13.8.4 Black generation and undercolor removal
With regard to the CMYK color space, in principle, all colors can be represented with cyan, magenta,
and yellow. In practice, however, the theoretically correct combination of these three colors will not
produce the color expected when printed, because of the limitations of inks.

Navigator RIP version 9

User Manual

361

Color Separation

To overcome this practical problem, pure black ink is used to improve color reproduction on the
printed page. This is the role of the K or black separation. Black is added to produce pure black on the
page, because using a combination of cyan, magenta, and yellow usually gives dark brown, rather than
black, when printed. Therefore, black text is printed with black ink.
Black is also added in color regions of an image to strengthen color tones. The application of black
can often be very effective for improving an image. The amount used can be varied according to the
effects you wish to achieve.
Black generation is the process of computing how much, and where, black should be added to the
image.
Note: If you have ColorPro available, it is able to add black in ways more subtle than the controls
described here, using Color Rendering Intents. See the separate ColorPro User Guide for details.
When converting color descriptions expressed in RGB (or in HLS, device-independent color, or other
spaces which end up as RGB) to CMYK for printing, the RIP must decide how much of a color is to
be represented by black ink, and how much by the others. Because a perfect theoretical description of
the color image is provided by the CMY components, if black is added without the appropriate
removal of some of the cyan, magenta, and yellow, the color produced on the printed page will not be
the one intended.
Undercolor removal (UCR) is the process of reducing the amount of other colors present where the
black is added. The legend ucr represents undercolor removal in the graphs later in this section.
Note: The black generation settings in this dialog box operate in the RIP without ColorPro. With ColorPro enabled, an alternative method is normally used. The settings made here are used with ColorPro
only when sending RGB data direct to a four-color device, without first converting to a device-independent color space.

13.8.5 Black generation
You can specify how black generation and undercolor removal should be done in the New Color Setup
dialog box. The settings in this dialog box control the way the RIP will apply black by constructing
internal calls to the PostScript language operators setblackgeneration and setundercolorremoval. The dialog box offers a number of black generation schemes. Factors that you should take into account when
selecting a scheme include the qualities of the various inks (discussed in Ink densities on page 364)
and printing media.
The scheme used is controlled by the Black generation drop-down list. The options are:


Ignore



Maximum



None (the default)



Light, Medium, and Heavy



UCR

Sections 13.8.5.1 through 13.8.5.5 describe these options.

362

User Manual

Navigator RIP version 9

13.8

Color Setup

Rarely, a job will specify black generation itself. You can force the scheme set in the dialog box to
override those set by the job, by selecting the Override black generation in job check box.

13.8.5.1 Ignore
This option does not set black generation and undercolor removal. It replaces as much color as possible with black, while maintaining the intended color, irrespective of ink densities. Because no PostScript language code for performing undercolor removal is generated, it is the fastest method.

13.8.5.2 Maximum
K, ucr

CMY

This option introduces a lot of black, taking into account the maximum black ink density. Specify the
maximum black ink density in the adjacent Max black text box as a percentage value, as described in
Ink densities on page 364.

13.8.5.3 None
CMY

K, ucr

This option performs no black generation or undercolor removal. Black is represented as a mixture of
cyan, magenta, and yellow, leaving only those colors expressed explicitly in the PostScript language
job as black‚ rather than as a mixture of red, green, and blue, or as device independent color‚ to be
rendered on the black separation.

Navigator RIP version 9

User Manual

363

Color Separation

13.8.5.4 Light, Medium, and Heavy
Light

Medium

Heavy

K

K

CM

CMY

K
ucr

ucr
CM

ucr

These options introduce black gradually, according to exponential functions, with proportionately
smaller amounts of black added and color removed for the lighter colors than the darker ones. This is
again subject to the constraints of maximum ink densities, specified in the adjacent boxes. See Ink
densities on page 364 for details of controlling these ink densities.

13.8.5.5 UCR
K

CMY
ucr

Instead of an exponential curve, this option adds no black until the maximum colored ink density is
reached and then adds black linearly up to its maximum. The maximum colored ink density is the
maximum ink density value minus the maximum black density value. See Ink densities on page 364
for details of controlling these ink densities.

13.8.6 Ink densities
Most of the black generation styles are affected by the ink densities set in the two Max ink and Max
black options in the black generation section of the Color Setup dialog box.
You should select these values with consideration for paper and press characteristics.

13.9 Color separation angles in job
The RIP sometimes needs to identify which colors are represented in jobs: for example, when recombining a preseparated job. Often there are well structured identifiers that give the answer directly and
unambiguously, and most pre separated jobs have PlateColor comments. Therefore, separation detection by angle has been turned off by default.
Where there is not an obvious identifier, most likely in legacy jobs, the RIP analyzes the contents of
the job to decide a likely color. The screen angle is one of the items that the RIP analyzes.
A switch labelled Detect input separations by angle on the New Color Setup dialog (with or without
color management), allows you to turn separation detection by angle on.

364

User Manual

Navigator RIP version 9

13.10

Trapping features

Set the Cyan, Magenta, Yellow, and Black text fields to the screen angles that the incoming job uses for
these colors.
Note: The angles in this section are the screen angles expected in the incoming job, not the angles
used for output. The angles used on output are set in the Edit Style dialog box, and can be entirely different.

13.10 Trapping features
Trapping options are found in the Trapping section of the Edit Page Setup dialog box and gives some
control over trapping; that is, overprinting edges of objects in the output to avoid white gaps showing
when printed due to slight misregistration.
If your copy of the RIP has the one of the optional TrapPro features enabled, you can create sets of
trapping rules and apply them within the RIP. TrapPro is fully described in the separate TrapPro User
Manual. (You must enable TrapPro by obtaining a keyword and selecting the TrapPro item while following the procedure described in Switching on Screening options on page 170 of this manual.)
Making full use of trapping in the RIP can require the choice of appropriate options both in the applications creating the PostScript language job and in the RIP.
PDF jobs containing PJTF (Portable Job Ticket Format) structures that detail trapping parameters are
supported with respect to making the parameters available to TrapPro. Previously, PJTF structures
were ignored. Therefore, if TrapPro is enabled (that is, just the password entered, not necessarily any
parameters set established via the GUI), a PDF job containing trapping parameters (via PJTF structures), will be trapped as dictated by those parameters.

13.10.1 Trapping and QuarkXPress
The Navigator RIP supports trapping facilities provided by QuarkXPress and its settrap PostScript language extension.
QuarkXPress has the ability to generate arbitrary trapping. It can do so in either of two ways:




By including explicit overprinted borders in the PostScript language page description it produces. This method works on all RIPs but may produce large job files.
By indicating that a capable RIP should generate the trapping. The RIP can do this if you select
the settrap (Quark) option. The QuarkXPress operator must use a printer description file declaring that the RIP supports this feature. Using this option allows QuarkXPress to generate more
compact PostScript language code, which saves disk space and may lead to faster interpretation
by the RIP.

13.10.2 Controls in the Navigator RIP
The Trapping drop-down list in the Trapping section of the Edit Page Setup dialog box always provides
the following options:
None

Navigator RIP version 9

This option performs no trapping.

User Manual

365

Color Separation

settrap (Quark) 

Use this option to have the RIP generate overprinted borders according to
instructions embedded in suitable jobs by QuarkXPress. See Trapping and
QuarkXPress on page 365 for details of how to produce suitable jobs.
If your copy of the RIP has one of the optional TrapPro features enabled, there may be extra entries in
this list and you also can create new sets of trapping rules that also become entries in this list, as
described in the separate TrapPro User Manual.

13.11 Pages in the Output Controller
In general, the RIP treats separations the same way whether they are the result of processing a preseparated job or the result of separating a composite color job within the RIP.
Depending on the separations style, each page of a composite color job can produce several pages, one
for each separation. Once these pages are in the Output Controller, the RIP handles them in the same
way as any other pages.
The pages are tagged with their color, which appears after the name in the Output Controller. For
example, the job picture.ps separated for CMYK printing would have four entries in the queue, as follows:
picture.ps (C)
picture.ps (M)
picture.ps (Y)
picture.ps (K)

Cyan, magenta, yellow, and black are abbreviated to C, M, Y, and K respectively. Red, green, and blue
are abbreviated to R, G, and B respectively. Spot color separations are tagged with the full name of the
separation.

13.11.1 Roaming separations
When you view a separation on a color display, using Roam, it is displayed in the appropriate color, at
least until you choose to change that display color. The Roam window also displays the title of the
page, an abbreviation for the color, and the resolution. Cyan, magenta, yellow, and black are abbreviated to C, M, Y, and K respectively. Red, green, and blue are abbreviated to R, G, and B respectively.
An asterisk character ( * ) indicates a spot color separation, and a percent character ( % ) indicates
grayscale.


Shift


You can view a block of several separations at once. Click to select the first one, then hold down the
Shift key and click to select the last one.
When you view multiple separations, the colors are overlaid to give an impression of how they will
look when combined on paper. For example, in a high-resolution screened picture, you should be able
to see the rosettes of the screen pattern. (See Chapter 6, Screening, for more discussion of viewing
superimposed screens.)

366

User Manual

Navigator RIP version 9

13.11

Pages in the Output Controller

You can roam a separation in a different color, which can be useful, for example, if you want to see the
differences between two separations of the same color. To highlight the differences, change the roam
color of one page and then roam the pages together. For details of changing the roam color, see Changing the color in Roam on page 367
For more information on roaming, see Roam and Preview windows on page 84.

13.11.2 Roaming composite pages
When you view a composite page using Roam, by default the RIP shows all the separations in the
composite page together.
You can reduce the number of separations that you can see in the Roam or Reduced Roam window
using the Roam Options dialog box. See Roam Options and Preview Options dialog boxes on page 85
for details.

13.11.3 Changing the color in Roam
You can inspect and change the colors displayed in the Roam window for the colorants in individual
separations and composite page buffers. To do this, select a page buffer in the Output Controller, click
Info, and in the Info dialog box click Change roam color. Figure 13.12 shows the dialog box that
appears.
Note: You cannot inspect or change the roam color while you are roaming a page buffer from any
page in the same job.

Figure 13.12 Change Roam Color dialog box

The Change Roam Color dialog box appears with a table displaying all the colorants present in the
selected page buffer. The columns in the table are:
Colorant

This is the name of the colorant in the page buffer. In a separation, there is
only one colorant. In a composite page buffer, all the included colorants
appear. (Typical composite page buffers contain only process colors but, for a
small number of output plugins, there can also be spot colors.)

Red

This is the red component of the roam color, in the range 0 (zero) through 1.0.

Green

This is the green component of the roam color, in the range 0 (zero) through
1.0.

Navigator RIP version 9

User Manual

367

Color Separation

Blue

This is the blue component of the roam color, in the range 0 (zero) through
1.0.

Roam Color

This is the name of the roam color. In an unchanged page buffer this is the
same name as appears in the Colorant column. In a changed page buffer, the
color is the last one chosen for this colorant. You can substitute any other
color by choosing from a list of common colors or by typing new values.

To change a color, first select it by clicking on its row in the table. The boxes at the foot of the table
display the RGB values and the name of the roam color for the selected colorant. You can choose
named colors from a list or specify any other color by RGB values:




To select a named color, use the drop-down list for Roam Color. The listed values are any special colors represented in this page buffer, a list of default colors for the RGB and CMYK
spaces (Default Red and so on), and an entry called Other. You cannot select Other: it shows only
that you have edited the RGB values to a color not in the list. To return to the original roam
color for a colorant, use the list to select the name that appears in the Colorant column.
To specify any color not in the drop-down list, edit the values in the fields for Red, Green, and
Blue. Once you have edited a value then, as soon as you move to another field (or select a different row in the table), the Roam Color name for the edited colorant changes to Other. If you
want to edit another color, click on its row. (You can do this for all colorants if you wish; each
can have its own value for Other.)

Click OK in this dialog box and OK again in the Info dialog box to save your changes to roam colors.
Click Cancel in either dialog box to abandon your changes.

368

User Manual

Navigator RIP version 9

Appendix A
Troubleshooting

0

This appendix provides solutions to common problems that can occur when running the RIP.
The first sections contain information about the warning messages that can appear. They are grouped
according to where the messages appear in the RIP.
Section A.1, Warning messages and what to do, gives a list of some of the major error messages
that may occur when running the RIP. All of the messages in this section appear in dialog boxes.
Section A.2, Warnings in the Navigator RIP window, describes the warnings that appear in the
system monitor. They are grouped according to the type of problem.
Section A.3, Warnings within the progress box, describes the messages that appear in the
progress box. The progress box is part of the Output Controller in either of the multiple modes,
or a separate window in either of the single modes. This list does not include the warnings generated by output plugins.
The remaining sections provide additional information on specific topics.
Page imposition and media saving on page 377 contains information on imposition and media
saving.
Seybold timings on page 377 describes Seybold test timings.
TIFF/IT troubleshooting on page 378 describes solutions to problems when imaging TIFF/IT
files.
PDF troubleshooting on page 379 describes solutions to problems when imaging PDF jobs.
Network troubleshooting on page 383 describes solutions to network problems when configuring the RIP.
Spool folder problems and considerations on page 384 describes how to set the access permissions for the spool folder.

A.1 Warning messages and what to do
The following is a list of some of the major error messages that may occur when running the RIP. All
of the messages in this section appear in dialog boxes.

Navigator RIP version 9

User Manual

369

A.1.1 Problems with starting the Navigator RIP
Table A.1 Start-up messages
Message

Problem

Things to try

The RIP failed on bootup

An error has occurred while
the RIP was starting up.

Reset the RIP to the factory
defaults.

The RIP startup failed

An error occurred while
starting up the RIP.

Reset the RIP to the factory
defaults. Reboot the
machine. If this does not
help, reinstall the RIP.

Superpro dongle not
plugged in or invalid

Something concerning the
dongle is incorrect.

Check that the dongle is
installed and plugged-in correctly.

Fatal error: Fatal security
device failure

Check that the Sentinel
device drivers have been
installed and started. If this
does not help, shut the PC
down, disconnect the dongle
completely, and reconnect it.
Power-up the PC again. If
these suggestions fail, you
may have an invalid or a
failed dongle.

A.1.2 Problems with resources
Table A.2 Resource messages

370

Message

Problem

Things to try

Could not access a resource
for the current plugin device
driver

The plugin driver for the
current device seems to have
been moved.

Reset the RIP to the factory
defaults.

Could not access a Setup
resource

The setup file has been corrupted or is missing.

Reset the RIP to the factory
defaults.

There are no devices
installed in the setup file

There are no devices
installed in the devices
folder.

Reinstall the RIP.

User Manual

Move a copy of the device
driver into SW\Devices.

Navigator RIP version 9

A.1.3 Problems with files
Table A.3 File messages
Message

Problem

Things to try

Could not open the newly
created RIP setup file

This probably means that
there are too many other
files open.

Close some files.

File too deeply buried inside
directories
Move it somewhere else

The file pathname is too
long for the RIP to cope
with.

Move the file that you are
trying to access to a point
higher up in the file system
so that the full pathname
becomes shorter.

Incompatible version of the
RIP setup file used/
Old RIP setup file used

The setup file you are using
is associated with a different
version of the software.

Find and install a copy of
the correct setup file that
was supplied with the version of the RIP that you are
running (this file must be
placed in the SW folder) or
reinstall the RIP.

Problem finding file‚maybe
disk is damaged

The RIP cannot find a file.

Try running a disk repair
utility.

A.1.4 Problems with sockets
Table A.4 Socket messages
Message
No communication

Problem

Things to try

Suspect a bad configuration
in the receiving or sending
application.

Check that both applications
are using the same port and
that the sending application
is using the expected protocol: basic TCP/IP socket
stream or Xinet PapConnect,
as configured in the Socket
Configuration dialog box.
Next check the network connectivity using ping or an
equivalent network utility
program.

Navigator RIP version 9

User Manual

371

Table A.4 Socket messages (Continued)
Message
Bad jobs at the receiving
end

Problem

Things to try

The sending application
may not be using the correct
protocol.

Check that the sending
application is using the
expected protocol: basic
TCP/IP socket stream or
Xinet PapConnect. Check
that no other machine is
already using the same port
and sending something that
is not a PostScript language
job.
Check that the sending
application is using the
expected protocol.

Missing, bad, or corrupted
status messages at the sending machine

The Socket plugin or the
port is not configured correctly.

Check that the RIP Socket
plugin is configured to
return the PostScript language standard output on the
correct port (Address).
Check that no other machine
is already using the same
port and sending something
that is not the standard
output from a PostScript
language job.

Poor transfer rates

372

User Manual

An inappropriate protocol
may be in use.

Deselect the Xinet protocol
in the Socket Configuration
dialog box and the sending
application. Xinet PapConnect does significant error
checking, which slows
transfers and may be
unnecessary for most jobs.

Navigator RIP version 9

A.2 Warnings in the Navigator RIP window
The following warnings all appear as messages in the Navigator RIP window. Again, the warnings are
grouped here according to the type of problem.

A.2.1 Problems involving disk space
Table A.5 Disk space messages
Message

Things to try

System warning‚Insufficient Disk workspace

Create more free disk space before reprocessing the job that
gave the warning.

Error VMerror Offending
Command: renderbands

This appears after a partial paint fails.
Make sure that compression is turned on in Configure RIP.
If this does not help, free-up some disk space.

System Warning: Free disk
space gone below requested
limit

The RIP waits for some disk space to be freed.
This is not a fatal error. It can happen, for example, if the
RIP is outputting pages, or has pages waiting to be output in
the Active Queue. When these pages have been output, they
are deleted automatically and the RIP continues with its current job.
If there are no pages waiting to be output, free up disk space
by doing some of the following things:
Delete some files.
Turn on page compression in the Configure RIP dialog box.
Reconfigure the PageBuffers folder by placing it on another
disk with more free space.
Ensure that there are no locked pages in the Output Controller.

A.2.2 Problems involving fonts
Table A.6 Font messages
Message
Error: invalidfont; Offending Command: 

Things to try
Check that the RIP has installed the font correctly.
Try proofing the fonts using the Proof Fonts option on the
Fonts menu. If the font fails to proof it may be corrupt. If the
fonts proof correctly, the job itself may be corrupt.
If any job requires a particular font which is not installed, the
RIP attempts to use Courier as a substitute.

Navigator RIP version 9

User Manual

373

Table A.6 Font messages (Continued)
Message

Things to try

 Font not
found; using Courier

The font specified in the PostScript language file is not actually loaded into the RIP. Courier is the default font in this
case.

Courier Font not found;
using Courier

If this message appears, the RIP currently has no fonts
loaded at all. Use Install fonts to install some fonts‚ the minimum font set that must be installed is Courier, Times, Helvetica, and Symbol. Alternatively, reinstall the RIP.

A.2.3 Problems involving files
Table A.7 File messages
Message

Things to try

ERROR IN CONFIG FILE

The RIP failed to finish interpreting the file.
For example, you will see this message if you try to print a
TIFF file that is corrupt, unsupported, or of an unrecognized
type.
This can also occur if a file in the spool folder is locked by
another application. Close the file and try again.

Inappropriate compression

This message appears if you try to print a file that has an
inappropriate compression format. For example, a color or
grayscale TIFF file with CCITT compression. CCITT compression is only suitable for monochrome TIFF files.

A.3 Warnings within the progress box
When appropriate, the progress box may show the following warning messages, together with the
accompanying icons. The progress box is part of the Output Controller in either of the multiple modes,
or a separate window in either of the single modes.
Output plugins can supply their own warnings and icons, listed in their own documentation.
Table A.8 Progress box messages
Buffer full 
The page buffer on the output device is full
Buffer space low
The output device is running out of buffering memory
Busy
The output device is working on another job

374

User Manual

Navigator RIP version 9

Table A.8 Progress box messages (Continued)
Busy or off-line
The output device is either busy or off-line
Communications failed 
Communication between the RIP and the output device has either been
broken or was never established
Cover open 
The cover of the output device is open
Data transfer failed 
Image data transfer between the RIP and the output device has either
been broken or was never established
Data underrun 
The output device has not received data from the RIP when it was
expected
Deleted cassette
The required cassette has been deleted, in the Cassette Manager.
Ink low
The ink supply to the output device is running low
Ink out
The ink supply to the output device has been exhausted
Interface card failed 
Communication between the RIP and the interface card in the machine
has either been broken or was never established
Invalid clipping 
An invalid clipping was requested of the output device
Invalid resolution 
An invalid image resolution was requested of the output device
Laser diode failed 
The laser diode of the output device is not working satisfactorily
Low power
The output device is low on power
Misplaced cassette
The required cassette is in another output device.

Navigator RIP version 9

User Manual

375

Table A.8 Progress box messages (Continued)
Missing cassette
There is no cassette in the output device
No cassette
The input media cassette requested is not available
No power
The output device has no power
No take-up cassette
There is no take-up cassette for the output device
Not ready
The device is not ready, for an unspecified reason‚ perhaps unknown
or too complex to show. Look for an extra message in the Monitor
window.
Off-line
The RIP cannot communicate with the output device
Page stop-started 
The RIP has supplied data quickly enough, but the device has
stop/started
Paper jam
Media has jammed in the output device
Paper low
The paper or film supply to the RIP output device is running low
Paper out
The paper or film supply to the output device has been exhausted
Printer caught up 
There was a data underrun, and stop-start was either not selected or is
not supported by the printing device
Take-up full
The take-up cassette is full
Take-up space low
Space in the take-up cassette for the device is running low

376

User Manual

Navigator RIP version 9

Table A.8 Progress box messages (Continued)
Toner low
The toner supply to the output device is running low
Toner out
The toner supply to the output device has been exhausted
Unknown error 
An unknown condition has caused an error
Warming up
The output device is preparing itself for communication with the RIP
Wrong cassette
The wrong cassette is in the output device

A.4 Page imposition and media saving
On wide printers, using the media saving option (described under Printing effects on page 121) can
save both time and media. You must ensure that you set the media width for the cassette being used
correctly, because it is the media width that is used to determine if the rotated page would fit on the
media. See Monitoring media on page 249 for details of how to set this information.
Some pages may have surplus white space at the sides, and this could mean that film saving will not
rotate the page. You can force the rotation in the Edit Page Setup dialog box, and also tell the RIP to
center the page if appropriate, so that only the white space is clipped.
It is possible to set up automatic operations such as printing 4-up or 8-up. This is done by adding fragments of PostScript language code into the system that specify where to lay out the pages. This could,
for example, automatically fill a large sheet of film with pages. This form of imposition only works
within a single job.

A.5 Seybold timings
The Seybold test timings have to cover a large range of resolutions, so, for example, two printers, with
resolutions of 2000 and 2540 dpi respectively, would be compared to one another directly. However,
remember that there is more data in a higher resolution bitmap‚ a 2540 dpi bitmap contains 62.29%
more data than a 2000 dpi bitmap. The time taken to generate the 2540 dpi job, while probably not as
much as 62% longer, is certainly substantially longer.
If you really must reduce timings to be comparable across different resolution printers, the only solution is to use the lowest resolution possible.

Navigator RIP version 9

User Manual

377

A.6 TIFF/IT troubleshooting
Various problems may occur and warning messages may appear when imaging TIFF/IT files with the
RIP. These are described and explained below.
Missing, duplicated, or partial images
A typical page is described by several files, which can go missing or be in unexpected places.
The RIP finds files most quickly if the FP file and the subfiles are in the same folder. It helps to
use the correct file extension for each file type.
Duplicated (partial) images may be the result of printing subfiles independently. Select only the
FP file, not its subfiles, when you want to print a final page.
Poor image quality
Files have an embedded resolution, which the RIP must match in its Page Setup if you want
high-quality results. The best way to find the embedded resolution (and page size) is to use a
dedicated TIFF file analyzer.
If you try to use too high an output resolution, you will see the following message:
Output resolution too high for this file. It should be no greater than  DPI
%% WARNING: job continuing regardless.
Media wastage is possible.

Clipped images
The RIP does not take a page size from TIFF/IT files. You must select a suitable Page Setup
before printing the file. Use a TIFF analyzer to discover the page size.
Failure to produce output
open: the TIFF 6.0 or TIFF/IT file
is either corrupt, unsupported, of an unrecognised
type or the appropriate file type is not enabled
in Configure RIP / Extras

The RIP displays this message if you attempt to image TIFF/IT data types that it does not support or to image files that do not conform to the TIFF/IT-P1 profile.
If you attempt to print TIFF/IT-P1 files when the TIFF/IT option is not enabled, then the TIFF
6.0 input option may attempt to process the parts of the file that it recognizes as TIFF. If this
message appears then the TIFF 6.0 input option does not recognize any part of the file as TIFF.
Poor performance / Long imaging times
Text in the TIFF/IT file can lead to large numbers of line segments and very large files. See the
comments made in Installation and requirements on page 234.
Also, if the computer running the RIP is running other applications at the same time, the other
applications may be using memory that the RIP could use to operate more quickly. Shut down
any programs that you do not need, then stop and restart the RIP to be sure that it is using as
much memory as possible.

378

User Manual

Navigator RIP version 9

Problems with SCID files
Standard Color Image Data (SCID) primary data files are incompatible with the TIFF/IT support in the RIP, but SCID alternate data is compatible. SCID primary data is incompatible
because it uses the dot range 28 through 228. (See the Glossary on page 397 for an explanation
of dot range.) The ISO document DIS 12640 describes the dot ranges and other differences
between the primary and alternate formats, but the next paragraph is sufficient to identify both
types of data.
Primary data files are named N1 through N8 and S1 through S10, and each is visibly labeled
ISO 400 in the image. The alternate data is calculated from the primary data, has a lower spatial
resolution, and is visibly labeled ISO 300 in the image. The names of the alternate data files end
in the letter A, resulting in the names N1A, S1A, and so on.

A.7 PDF troubleshooting
The methods of control provided by the PDF Options dialog box mean that it is possible to reject PDF
files that are valid, but that fail to meet strict criteria such as the PDF/X-1 specification. It is also possible for PDF jobs to be badly constructed or for required external files to be missing or in the wrong
location. Always inspect the RIP Monitor window or log file if you see problems with printed output.
You may see the following effects or messages.
No pages printed
Check in the PDF Options dialog box that the PDF job is of the required type (for Accept type(s))
and that it contains at least one page matching the pages or ranges in the Pages field.
Poor color matching
Check that you have an appropriate match of color spaces and management in the PDF job and
in the Page Setup in use. If the problem appears in an image, also check that it is not a low-resolution OPI preview being used to substitute for a missing OPI high-resolution image.
Areas missing from the page or printed at low resolution
Check that any files referenced by OPI are present and that OPI is enabled in the RIP. (Files referenced by OPI must be embedded in a PDF/X-1 file.)
%%[ Warning: Skipping page 1 - not in requested page range ]%%

This is not an error. It is a reminder that the options chosen in the PDF Options dialog box have
caused a page to be omitted from the PDF job being printed. This omission may be intentional.
%%[ Error: invalidaccess; Offending command: pdfexec ]%%

The PDF files may have been saved with security settings that require a password to be entered
for printing. Obtain the password (from the supplier of the PDF job) and enter the password in
the text field in the Password section of the PDF Options dialog box. Passwords are casesensitive.
If you enter the correct password (in the Navigator RIP) and still see this error, check that you
have not entered one or more white space characters at the end of the password. Another possible cause of this error is that the password uses characters from an extended (non-ASCII) char-

Navigator RIP version 9

User Manual

379

acter set. The way in which these characters are represented can vary from platform to platform
and the PDF password may have been set on a platform different from the one on which you are
running the RIP. Request a new file using a simpler password.
Finally, the PDF file may be damaged. Try using another application to view or print the file,
taking note of any messages given by that application.
High resolution file is embedded in PDF job file.

This is not an error nor a warning. It is information about the structure of an OPI job. This message is most likely to occur when processing a PDF/X-1 job, but could occur for a basic PDF
file.
****** PDF/X-1 Error: text explaining the reason

The job is not a valid PDF/X-1 job. See the following messages for explanations of the various
reasons that can appear in messages of this form. The RIP may be able to process the job as a
PDF 1.3 file, if you have allowed this by a choice in the Accept type(s) list.
Note: If you have used a creating or editing application that claims to be compliant with
PDF/X-1:1999, you should report these errors and warnings to your supplier of that tool. The
RIP performs strict checking of referenced files as well as the basic PDF content of a PDF/X-1
job.
****** PDF/X-1 Warning: Clipped out 'stroke' operator in EPS

The job deviates from the file PDF/X-1 standard‚ in this example because of a PostScript language operator used in a referenced EPS file. (The operator is illegal in an EPS file referenced
from a PDF/X-1 job but harmless in this context.) Any message starting PDF/X-1 Warning: has
some problem, for the reason given in the rest of the message, but will not cause the RIP to abort
the PDF job.
****** PDF/X-1 Error: Invalid TIFF compression

An embedded TIFF file uses a compression method not allowed by PDF/X-1. Many TIFF files
use LZW compression, which is not allowed. Ask the creator of the file to recreate the file using
an allowed compression method; PDF/X-1 allows an embedded TIFF file to be compressed
using the CCITT or (new) JPEG methods.
Note: The new JPEG method is given the TIFF tag value Compression=7 and is expected to be
adopted as part of the forthcoming TIFF 7 specification. The new method was designed (by the
Independent JPEG Group) to overcome severe problems in the method of JPEG compression as
described in the TIFF 6.0 specification, dated 1992. The old scheme used the TIFF tag value
Compression=6 and several related but separate fields.
****** PDF/X-1 Error: Vector painting operator in EPS: stroke

An embedded EPS file uses a vector painting operator. PDF/X-1 does not allow embedded EPS
files to contain vector painting operators: stroke, fill, show, and so on.

380

User Manual

Navigator RIP version 9

****** PDF/X-1 Error: Invalid alternativeSpace in Separation 
colorspace
****** PDF/X-1 Error: Invalid base colorspace in Indexed colorspace

The PDF job uses an illegal color space. PDF/X-1 places restrictions on the alternative Space of
Separation color space and the base color spaces of Indexed color spaces in embedded EPS
files.
****** PDF/X-1 Error: LZWDecode in EPS

An embedded EPS file uses LZW compression, which is illegal in PDF/X-1.
****** PDF/X-1 Error: Missing Subtype in EF object
****** PDF/X-1 Error: Unknown Subtype in EF object
****** PDF/X-1 Error: Subtype incorrect for embedded file

The PDF/X-1 file must specify the type of an EF object (embedded file) using the Subtype key.
The Subtype key can be TIFF, EPS, DCS, and so on. The RIP checks that the Subtype key is
present, is one of those allowed, and matches the actual type of the file.
****** PDF/X-1 Error: Invalid TIFF PhotometricInterpretation

The PDF job references a TIFF file of an illegal type. Embedded TIFF files must be CMYK,
monochrome, or gray scale. PDF/X-1 does not allow RGB, Lab, or other color spaces.
****** PDF/X-1 Error: PDF referenced from PDF/X-1
****** PDF/X-1 Error: JPEG referenced from PDF/X-1

The PDF job references a file type that is illegal for PDF/X-1. The PDF/X-1 standard allows
only TIFF, EPS, DCS, or TIFF/IT-P1 files to be embedded.
The following messages can appear as Errors or Warnings. They appear as Errors if you have set up the
RIP to accept only PDF/X-1 jobs.
In most cases, understanding the messages requires detailed knowledge of the PDF specification but
all the messages indicate that the job is not PDF/X-1 compliant. If you see these errors when printing
PDF/X-1 jobs, you have two alternatives: one alternative is to ask for the job to be re-created in a form
that is compliant with PDF/X-1 and wait for that job to be supplied to you; the other alternative is to
use a Page Setup that accepts basic PDF (using the option Any PDF <= 1.3 as basic PDF) and print the
non-compliant version. (In rare cases, there may be a more fundamental error in a PDF file that prevents you printing it at all; in such cases, you must use a different PDF file.)
****** PDF/X-1 Error: unknown PDF/X version
****** PDF/X-1 Error: unexpected PDF/X version
****** PDF/X-1 Error: obsolete PDF/X version
****** PDF/X-1 Error: unexpected PDF version

The PDF version number is too low, too high, or otherwise unsuitable for use with this version
of the RIP and the settings in use.

Navigator RIP version 9

User Manual

381

****** PDF/X-1 Error: missing Info dictionary
****** PDF/X-1 Error: invalid Info dictionary

PDF/X-1 jobs must have a valid Info dictionary.
****** PDF/X-1 Error: missing trailer ID key

PDF/X-1 jobs must have an ID entry in their trailer object.
****** PDF/X-1 Error: invalid encryption

If encrypted, PDF/X-1 jobs must have a blank User password.
****** PDF/X-1 Error: invalid operator
****** PDF/X-1 Error: invalid HTP in ExtGState
****** PDF/X-1 Error: invalid TR in ExtGState
****** PDF/X-1 Error: invalid RI in ExtGState
****** PDF/X-1 Error: invalid TransferFunction in halftone
****** PDF/X-1 Error: invalid colorspace
****** PDF/X-1 Error: invalid file compression
****** PDF/X-1 Error: invalid function type
****** PDF/X-1 Error: invalid halftone type
****** PDF/X-1 Error: invalid pattern type

PDF/X-1 files have restrictions on the allowed PDF operators, parameters in the graphics state,
transfer functions, color spaces, methods of compression, halftones, and patterns. The job has
tried to use an invalid option.
****** PDF/X-1 Error: missing embedded font

PDF/X-1 jobs can use only embedded fonts. The job has tried to use a font without embedding
it.
****** PDF/X-1 Error: invalid filespec
****** PDF/X-1 Error: invalid embedded filespec

Files referenced through OPI in a PDF/X-1 file must be embedded within the PDF/X-1 file
itself. The job includes OPI references to files that are not embedded.
****** PDF/X-1 Error: invalid external file

PDF/X-1 jobs can use external files only for OPI. The job has tried to use an external file for
some other purpose.
****** PDF/X-1 Error: invalid embedded file

PDF/X-1 jobs can embed a limited number of file types. The job has a file specification that is
badly specified for Macintosh, UNIX, or DOS platforms, is not embedded, or where the Subtype of the file indicates that the file is not TIFF/IT, EPS, DCS, or TIFF.

382

User Manual

Navigator RIP version 9

****** PDF/X-1 Error: invalid PS XObject

A PDF/X-1 job cannot contain a PostScript language XObject (PostScript language code
embedded in the PDF page description).
****** PDF/X-1 Error: missing characterized printing condition
****** PDF/X-1 Error: multiple characterized printing conditions

All data in a PDF/X-1 job must be prepared for exactly one characterized printing condition,
which is identified using embedded ICC profiles. (A job can embed multiple ICC profiles and
each must contain a characterized printing condition but all conditions must be the same.) The
RIP reports the first condition to the Monitor window, in a message similar to this example:
Prepared for printing condition "CGATS TR 001".

A.8 Network troubleshooting
This section covers solutions to network problems when configuring the Navigator RIP.

A.8.1 Navigator RIP fails to publish
If the RIP is not publishing on the network, check the following.

A.8.2 Network connections
Ensure that the network cable is connected correctly to your PC. The easiest way to do this is to check
that the PC can see other things on the network. For example, are there any printers on the network
visible in the Print Manager? If not, check that connections have not been broken due to connectors
being removed.

A.8.3 Restart the RIP once you have checked the connections and corrected any problems with the
network cable. Start the RIP, make sure that there is a network channel defined in the Input Controller
that is On, and then choose Navigator RIP > Start Inputs.Is the system software installed

correctly?
It is difficult to check the correctness of an installation. If you have checked for faulty connections, the
most reliable procedure is to reinstall the software.

A.8.4 The Navigator RIP is not picking jobs up correctly
The software on either the printing PC or the RIP PC may need reinstalling. If the RIP is published on
the network, but jobs do not get processed correctly, check the following:
Spooler problems
Some spoolers check for a specific product name. The RIP is set to LaserWriter-Sim. If the spooler does not recognize this, it may not send the job to
the printer. This name has been chosen to minimize such problems.

Navigator RIP version 9

User Manual

383

A.9 Spool folder problems and considerations
In cases where the spool folder is on a file server, you must ensure that the RIP has permission to
access the shared folder and all enclosed folders.

384

User Manual

Navigator RIP version 9

Appendix B
Jobs Containing Color Management
Data

0

Settings within the RIP, in the job, and in the images themselves can all control the processing of
images in a job. This appendix describes the settings that influence this processing and explains which
setting takes precedence in each particular case. Summary of options on page 386 summarizes this
information.
Important: Different rules apply when you are using Color. See the ColorPro Users Guide for
details.
If you are not using ColorPro, the RIP checks the following for Photoshop and PDF jobs, and allows
independent control of what happens.
When processing jobs containing Photoshop EPS images:


Is the Override color management in job option selected in the Color Setup dialog?



Does the image contain a PostScript language color space array?



Is the UseCIEColor parameter set to true in the job?

See Section B.1 and Section B.2 for details.
When processing jobs containing PDF files:


Is the Override color management in job option select in the Color Setup dialog?

B.1 Override color management in job not selected
The Navigator RIP checks for color management information in the image and the job in the
following strict order.


If the image contains a PostScript language color space array (Photoshop EPS files only):
The Navigator RIP uses the color space array (CSA) to transform the image. It treats the image
as a device-independent color image.



Otherwise, if the UseCIEColor parameter set to true in the job:
The Navigator RIP uses the DefaultGray, DefaultRGB, or DefaultCMYK color space resources to
transform the image colors. It treats the image as a device-independent color image.

Otherwise, if the UseCIEColor parameter is set to false or has no value in the job, the Navigator RIP
treats the job as CMYK or RGB.

Navigator RIP version 9

User Manual

385

B.2 Override color management in selected job


If the current Page Setup does not use a color setup:
The Navigator RIP checks the setting of the UseCIEColor parameter in the job.



If the UseCIEColor parameter is set to true in the job:
The Navigator RIP uses the DefaultGray, DefaultRGB, or DefaultCMYK color space resources to
transform the image colors. It treats the image as a device-independent color image.



Otherwise, if the UseCIEColor parameter is set to false or has no value in the job:
The Navigator RIP treats the job as CMYK or RGB.

B.3 Summary of options
Table B.1 Current Page Setup does not use a color management option
Override color
management in job

Image contains a
color space array

Selected

Not selected

Job contains
UseCIEColor set to

Result

True

Use the DefaultGray,
DefaultRGB or
DefaultCMYK color
space resources to
transform image colors

False 
or no value

Treat job as CMYK or
RGB

Yes
No

Use the CSA to
transform the image
True

Use the DefaultGray,
DefaultRGB or
DefaultCMYK color
space resources to
transform image colors

False
or no value

Treat job as CMYK or
RGB

Settings within the Navigator RIP, in the PostScript language or PDF job, and in the images themselves can all control the processing of images in a job.
Note: Some options apply only to EPS files produced by Adobe Photoshop.
PDF color management on page 387 describes the cases specific to PDF jobs.

B.4 PostScript language jobs and image files
The Navigator RIP checks the following when processing jobs containing Photoshop EPS images or
TIFF/JPEG images containing embedded ICC profiles:


Does the current Page Setup use a color management option?



Is the Override color management in job check box selected in the Color Setup dialog box?

386

User Manual

Navigator RIP version 9



Does the image contain a PostScript language color space array? (Photoshop EPS files only)



Does the image contain an embedded ICC profile?



Is the UseCIEColor parameter set to true in the job?

B.5 PDF color management
PDF jobs can use a variety of color spaces, including device-dependent spaces such as DeviceCMYK.
Typically, when using device-independent color spaces, PDF version 1.2 files use the CalGray and CalRGB color spaces and PDF version 1.3 files use the ICCBased color space but these usages are under
the control of the creating applications, see the Color tab in Distiller 7.0.
Full use of device-independent color requires ColorPro to be enabled.
Note: A PDF/X-3 file containing an OutputIntents dictionary will be color managed using the ICC profile indicated by the OutputIntents dictionary, as long as the job uses a device independent color space
and the Override color management in job option is not selected.

B.6 XPS color management
The XPS RIP component provides the following color management:





An ICC v4 compatible color management engine is integrated within the RIP component. This
allows color management of XPS Documents to an output color space.
Input color is supported as described in the XPS Specification.
Vector, text and image data defined in sRGB, scRGB, N-Color and ICC tagged color spaces is
supported and color managed to the output space.



For RGB output the output color space is sRGB.



For output the output color space is SWOP (CGATS TR001).



Output color is 1 or 8-bits per color per pixel.



All XPS input image formats are supported.

Navigator RIP version 9

User Manual

387

388

User Manual

Navigator RIP version 9

Appendix C
Using Genlin

0

Genlin is a utility provided with the Navigator RIP to read calibration targets generated by the RIP.

C.1 Introduction
Genlin supports these measuring instruments:


X-Rite 408



X-Rite DTP41 series



X-Rite DTP32



X-Rite DTP34



X-Rite DTP12



X-Rite 938



Gretag Macbeth Eye-One

The remaining sections show how to set up and use Genlin, and how to troubleshoot any problems.


Using Genlin on page 389 describes set up and use



Troubleshooting on page 393 describes troubleshooting

C.2 Using Genlin
The use of Genlin involves these stages:






Installing drivers for USB devices on page 390. This stage is only necessary if you wish to use
a measuring instrument that connects to your computer via the USB port. This includes variants of the DTP41, DTP34 and Eye-One measuring devices.
Starting a work session with Genlin on page 390. This section describes the connections and
checks to make before you start measuring targets.
Measuring each target on page 391. This section describes the steps involved in using Genlin to
measure a target.

Navigator RIP version 9

User Manual

389

C.2.1 Installing drivers for USB devices
If you wish to use a measuring instrument that connects to your computer via the USB port (includes
variants of DTP41, DTP34 and Eye-One), you must install some USB drivers for the particular
device, as described in the following procedure:
1. Plug the DTP41, DTP34 or Eye-One measuring instrument into a USB port. On some Windows
machines, you may require administrator privileges in order to be able to plug a device into a
USB port.
If USB drivers are not already installed, Windows will automatically start the Found New Hardware Wizard.
2. Select the Search for a suitable driver option in the Install Hardware Device Drivers page and
click Next.
3. Select the Specify a location check box in the Locate Drivers Files page and deselect the other
options.
4. In the ‘Copy manufacturer files from’ dialog, click the Browse button and navigate to the following folder:
For DTP41 and DTP34 devices:
\Genlin\drivers\XrDtp

For Eye-One devices:
\Genlin\drivers\EyeOne

5. Click Open to return to the Copy manufacturer files from dialog and then click OK.
Windows will confirm that it has found drivers for the device.
6. Click Next to install the drivers.
Once you have you installed the USB drivers for your measuring device, you can use Genlin as
described in Starting a work session with Genlin on page 390.

C.2.2 Starting a work session with Genlin
Follow these steps to start a session using Genlin:
1. Connect your measuring instrument to the computer using a serial interface (typically, the
COM1 or COM2 communications port) or a USB port.
USB support is available for the Eye-One, DTP41, and DTP34 devices and requires USB drivers to be installed, as described in Installing drivers for USB devices on page 390.
Note: When using the Eye-One device, you must choose Custom from the Port menu in the Configuration dialog box. This is because Genlin communicates with the device via third-party software.

390

User Manual

Navigator RIP version 9

2. If necessary, recalibrate the measuring instrument using the correct calibration plaque or other
white reference tool.
You should calibrate the first time you use an instrument with Genlin, or whenever you change
measuring instruments. You should also recalibrate the measuring instrument after periods of
storage or heavy use.
Note: When using the Eye-One device, Genlin sends a request to the spectrophotometer to calibrate itself so that Genlin can accurately read a new target. This means that you must place the
Eye-One device on its holder, which contains a built-in white reference, whenever you begin the
process of reading a target. Otherwise, Genlin will display a Calibration failed... error message
when trying to read the target, as described on page page 394.
3. Start Genlin by opening the application file located in the Navigator RIP application folder.

C.2.3 Measuring each target
Note: This procedure assumes that you printed an uncalibrated target.
Follow these steps to measure a target using Genlin:
1. Choose File > Configure to display the Configuration dialog box, as shown in Figure C.1.

Figure C.1 Configuration dialog box

Select your desired settings, as explained here, and then click OK.
RIP Folder

Identifies the SW folder of the RIP installation that you are using to print targets and import data.
You can read targets that have been created by the RIP running on another
computer if you have network access to the corresponding SW folder. If you
want to do this, click Change and use the file browser to select the SW folder
of the remote the RIP installation.
The default is the relative path to the SW folder of the the RIP with which
Genlin is supplied (as shown in Figure C.1).

Instrument

Navigator RIP version 9

A list of supported measuring instruments. Choose your desired measuring
instrument and ensure that the correct Port setting is selected.

User Manual

391

Measure

Measurement types supported by your chosen measuring instrument. Choose
a suitable measurement type.

Media

A list of types of media that targets are printed on, including press and imagesetter media. Choose the type of media that your target is printed on. For
example, choose Press Paper when using a proofing printer.

Port

A list of the interface ports available on your computer. Choose the port to
which your measuring instrument is connected.

2. Choose File > Read Target, select the number of the target that you are reading (printed as Reference Number: N on the target) and click OK.
3. In the Read Target dialog box, choose which channels you wish to measure, as well as the filter
type and measurement type that you wish to use.

Figure C.2 Read Target dialog box

To do this, select the channel you wish to edit and choose Yes or No from the menu below the
Read? column. If both your measuring instrument and target support more than one measurement system you may also have a choice of alternative filters and measurement types in the
menu below the Measure As column. For example, choose Cyan Status T (X-Rite), then click OK.
See Values on page 330 for details of measurement types.
4. Measure the target by referring to the details for your type of measuring instrument. If you have
repeated problems reading a patch or strip see Troubleshooting on page 393.
In particular, you must follow the screen prompts to measure the target. Note that when using
the DTP32 and DTP34 devices you must click OK in the Confirm to proceed dialog before loading the target. For DTP41 devices, you should click OK after inserting the target.
Strip-readers and other semi-automatic instruments
Ensure that you scan the target in the right direction. When reading strips, the
instrument should be positioned so that approximately an inch of blank paper
is available at the end of each strip. Try to avoid any marks outside the area of
the patches, such as the strip numbers.
You may see a Bad reading message appear if the instrument has been unable
to correctly measure the strip: if so, click OK. If you wish to retry reading the
strip, click Yes, align the strip with the instrument and click OK. Click No if
you wish to abandon measuring the target.

392

User Manual

Navigator RIP version 9

Manual instruments
Follow the screen prompts to measure the target. If you are using a manual
instrument such as the X-Rite 938 you will also see prompts in the display
panel of the instrument to read individual patches within strips. For example,
the prompt Move to: C100 means read the 100% Cyan patch.
Choose File > Abort Target if you wish to abandon reading a target.
5. Click OK when you have finished measuring the target.
At this point, Genlin has created a data file containing all the linearization data for the target, which
you can import into the RIP. (The file is named import and is located in the caldata folder within the
RIP SW folder.)
6. Use the menu option Output > Calibration Manager and, in the Calibration Manager, choose the
appropriate Device and Color Space for the target. (See Calibration Manager dialog box on page
323 for details of the Calibration Manager.)
7. The next action depends on whether you are updating an existing calibration set or creating a
new one. Choose the appropriate action:




If you are updating an existing calibration set, select it in the table listing. This must be the
calibration set that you used to print the target. Click Edit from uncalibrated target. The Edit
Calibration dialog box appears. Go to step 8.
Click New if you are creating a new calibration set. Then, if there are entries in the Profile
menu in the Edit Calibration dialog box, choose the supplied calibration profile that you
used to print the target. Enter a Name for the new calibration set. You can use the same
name as the supplied calibration profile, but omitting the enclosing parentheses( )that supplied calibration profiles use; this makes the link between the two profiles more obvious.

8. Click Import; see the description on page page 332 for more details. After importing the data
and making any other settings, exit the Edit Calibration dialog box and Calibration Manager by
clicking OK.
Warning: You must read the values from the data file (or copy the data file to another location) before
measuring another target for the same RIP installation. Genlin uses the same file name for every data
file so any existing measured data is lost when you measure a new target.
Start again from Measuring each target on page 391 to read another target.
Note: If you no longer need to measure any of the targets that you have printed using the RIP, you can
choose File > Purge. This means that the numbering of targets can restart from 1.

C.3 Troubleshooting
This is a list of some possible error messages and symptoms that you may see, together with suggestions for avoiding them.

Navigator RIP version 9

User Manual

393

C.3.1 Error messages
All error messages are preceded by the details of the measuring instrument. For example, you might
see this full message when there is a problem with an X-Rite 938 instrument:
X-Rite 938 Error: No responding device attached to selected serial line

Error: Returned data not recognised

There is a mismatch between the Instrument setting in the Configuration dialog box and the
measuring instrument that you are using. Check that you are using the correct Instrument setting
for your instrument.
Error: Open (interface details) error 0

There is a mismatch between the Port setting in the Configuration dialog box and the port interface to which your measuring instrument is connected. Try changing the Port setting or connecting your measuring instrument to the specified interface port.
Error: The USB device cannot be found

This message appears if Genlin is unable to locate the chosen USB device. Ensure the measuring device is connected to the USB port and is powered on. Ensure also that you have selected
the correct Instrument and Port in the Configuration dialog box.
Error: No responding device attached to selected serial line
Error: The USB device is not responding

Either of these messages may appear if the measuring instrument does not have any power supply. Check the power supply to the measuring instrument and ensure that it is switched on. If the
problem persists there may be a fault with the power adapter or cabling.
Error: Number samples received, but Number expected

This message appears if the Eye-One software was unable to correctly detect the boundaries of
each of the patches on the calibration target. That is, the number of patches read does not match
the number of patches expected. You may have scanned the calibration target too quickly or
confused the software by scanning part of the number at the top of a strip, and so on.
When reading strips, the guide should be positioned so that approximately an inch of blank
paper is available at the end of each strip. Try to avoid any marks outside the area of the patches,
such as the strip numbers.
Error: Calibration failed - place the device on its white reference and start again

This message may appear when calibrating the Gretag Macbeth Eye-One spectrophotometer.
You must place the Eye-One device on its holder, which contains a built-in white reference,
whenever you begin the process of reading a target. This allows Genlin to accurately read the
target. Refer to the documentation accompanying this device for further details.
Error: Unknown

This message may appear if you have used the File > Abort Target menu option. This message
may also appear if the RIP is unable to recognize the error generated by your measuring instrument. Check any display panel on a manual instrument for more details.

394

User Manual

Navigator RIP version 9

In all cases, you will be asked whether you wish to re-try measuring the target. If the error persists, consider recalibrating the measuring instrument or following advice in the Symptoms section.

C.3.2 Symptoms
Failure to communicate with the measuring instrument
This may be due to a mismatch between configuration settings and the actual instrument or
interface port used. A break in cabling, or a failure in software between the computer and the
measuring instrument may also be the cause of a communication failure. Check the connections
and settings in the Configuration dialog box. If these appear to be correct, try switching off or
disconnecting the measuring instrument for 30 seconds and then reconnecting it.
Alternatively, Genlin may not be able to communicate with the measuring instrument due to the
re-configuration of the interface port by another application. If you think this is the case, close
the application that you suspect is causing the conflict. If necessary, shut down and restart your
computer.
Failure to read the correct data from the target
A problem in this area is most likely to be a mismatch between the Target file selected in Genlin
and the type of target you are physically measuring. First make sure that the number you select
in the target list after clicking File > Read Target matches the reference number printed on the
target itself.
If recalibrating, you may have printed the target on the wrong paper type. Otherwise, you may
have read the wrong patches when using a manual instrument, or incorrectly aligned the target
when using a strip-reader. Finally, the target may be incorrectly printed or the measuring instrument may need recalibration.
Failure to transfer correct data to the RIP
Ensure that the RIP Folder specified in the Configuration dialog box is the path to the SW folder
of the RIP installation into which you are importing data.
If the RIP Folder is correct, this problem may be due to a problem with the content of the caldata
folder where target and import data is stored. This is very unlikely event but if it happens, delete
the caldata folder, which is a subfolder of the Navigator RIP SW folder and print the target again.
Note: After deleting the caldata folder you cannot use Genlin to read targets created before you
deleted the folder‚ you must reprint the targets.
The reference number printed on the target does not appear in the list when you click File > Read Target

This can happen if the target was printed using a different Navigator RIP installation. Ensure
that the RIP Folder setting in the Configuration dialog box is the correct path to the SW folder of
the RIP installation used to print the target.
This can also happen because the caldata folder was deleted between printing the file and trying
to read it with Genlin‚ reprint the target and measure the new print.

Navigator RIP version 9

User Manual

395

396

User Manual

Navigator RIP version 9

Glossary

This glossary gives a brief description of many of the important terms and concepts surrounding the
Navigator RIP. Italics are used to indicate terms with their own entry elsewhere in the glossary.
active device
The active device is the imagesetter or other output device to which the RIP is sending its output. This is the output device specified in the Page Setup for the job. See also menu device.
anti-aliasing
A technique in which intermediate colors or grayscale tones are used to visually smooth boundaries between different colors. Anti-aliasing is most useful at low or medium resolutions and
with boundaries between very different colors. The Navigator RIP TIFF output plugin can perform anti-aliasing, with a control offering choices between more smoothing and faster
preparation.
aspect ratio
The height-to-width ratio of a page.
banding
The white bands which can be produced if interpreted data is sent to certain kinds of imagesetter
too slowly (see also data underrun)‚ the result is that media continues to feed through, but no
image is available to print, leading to white bands in the output. The RIP uses a printer buffer
which ensures that data is sent to the imagesetter at a steady rate, in order to reduce the chances
of this problem occurring.
Banding will only occur in imagesetters which cannot stop‚ start successfully.
black generation
The process of adding black to CMYK images in variable amounts according to printing effects
required.

Navigator RIP version 9

User Manual

397

cassette
A container for output media. This cassette contains a roll of film or paper and is slotted onto
the top of an imagesetter in such a way that the media can be fed through. Some versions of the
Navigator RIP include the Media Manager which allows you to monitor the amount of media
left in many different cassettes automatically.
See also current cassette.
choke
The process of overprinting a small border on graphics to make them look smaller. Spread and
choke are often used as part of trapping to protect against misregistration of color separations.
CIP3
CIP3 was a group called International Cooperation for Integration of Pre-press, Press, and Postpress (CIP3). The CIP3 group developed the Print Production Format (PPF) for files to contain
information about print jobs including administrative data, information about inks and register
marks, comments, and preview images. CIP3 has become CIP4, and maintains a web site at
http://www.cip4.org/.
CIP4 is a similar group called International Cooperation for Integration of Processes in Prepress, Press, and Postpress, formed to continue the work of CIP3 and to develop a new file
format called Job Description Format (JDF).
CMYK
A color representation scheme (or color space) where cyan, magenta, yellow, and black are
combined to create full-color images.
color separation
A monochrome image that describes a component of a color image that has been described
using a particular color space. In printing, images are commonly depicted in the CMYK space,
leading to four separated pages for each full-color page.
color space
A scheme of representation for color images, such as CMYK or RGB. Colors are represented as
a combination of a small set of other colors, or by other parameters, for example: hue, saturation, and brightness (HSB).
composite font
A font which consists of more than 256 characters. Composite fonts are indispensable for producing images which contain, for example, Japanese text. However, they need to be treated as
separate from ordinary fonts.
core RIP
The Navigator RIP PostScript language compatible interpreter. This is the program which takes
PostScript language page descriptions as input and produces bitmaps as output.

398

User Manual

Navigator RIP version 9

crop marks
Marks, printed near the edges of an image, which indicate where the paper should be trimmed.
current cassette
The cassette feeding media to the output device receiving commands. This can be the active
device (receiving a job) or the menu device (receiving commands from options in the Device
menu).
current device
The term current device is ambiguous, because it can refer to two different devices.
The active device is the imagesetter or other output device to which the RIP is sending its output. This is the output device specified in the Page Setup for the job.
The menu device is the output device that provides the name of the Device menu, and receives
the commands generated by choosing options from the Device menu.
See also current cassette.
current color space
When you are creating or editing a Page Setup, the current color space is the color space of the
selected separations style.
data rate
The speed that an imagesetter receives data for imaging. It is important that the RIP sends data
to the imagesetter at approximately the data rate of the imagesetter, otherwise data underrun
may result. You can find out the data rate for a particular imagesetter from the instructions for
that imagesetter.
data underrun
The result of a RIP failing to supply data to an output device quickly enough. If the output
device cannot stop / start successfully, banding or other effects will occur which may cause a
loss of output quality.
DCS (Desktop Color Separation)
DCS is Quark Inc method of image substitution in PostScript language jobs. The Navigator RIP
supports both DCS 1.0 and 2.0, and the similar OPI scheme.
device driver
A piece of software, often provided by an output plugin, that helps the RIP communicate with a
particular printer, imagesetter, or other output device. You can link the RIP with any output
device, given the correct device driver. This driver could have been produced by you, or by
Global Graphics. It is also possible to use device drivers for input devices; see also input plugin.

Navigator RIP version 9

User Manual

399

DLD1 font
The Navigator RIPs own font format, into which most fonts can be converted. Operations with
DLD1-formatted fonts can be performed significantly faster than they would be with normal
font descriptions.
dot gain
A printing effect which results in dots being printed larger than they should be. It occurs as a
result of ink spreading on the printed page, and if not compensated for, can lead to an image
appearing too dark.
dot range
The range of numerical values used to represent color values. TIFF/IT-P1 uses a dot range of
zero (0) through 255.
Note: The value 0 may be associated with white and 255 with 100% black or the full density of
a particular ink, but this is not essential: in the MP data type, for example, these end values can
be associated with particular colors and the intermediate values represent proportionate blends
of these two colors.
See also TIFF (Tag Image File Format).
dot shape
The shape in which dots on the image are generated. See Chapter 6, Screening.
dpi
Dots per inch. A measure of the resolution of an output device. Dots per centimeter (dpcm) and
dots per millimeter (dpmm) are also offered by the Navigator RIP.
Encapsulated PostScript (EPS)
EPS is a subset of the PostScript language which allows images to be described in a format
which can be imported into other documents. EPS images are independent of the format of the
document, and so may be imported into documents using a wide variety of applications, from
within the application itself, or can even be imported into other PostScript language page
descriptions.
error diffusion
A technique that can be used to screen contone images into a halftone reproduction. The technique works by calculating the error between the required (contone) value and the achieved
(halftone) value at each point (which might be a single pixel or a halftone cell), distributing that
error to neighboring points, and using the error to modify the contone values for those points.
This is repeated for the errors at all points. The result is an irregular and non-repeating screening
pattern that shows very little color error.

400

User Manual

Navigator RIP version 9

Error diffusion is easy to implement on low resolution devices but can be difficult to use for
high resolution or color output, where the irregularity makes it difficult to predict moirÐ© or
dot gain effects. Another problem occurs where the image is rendered in bands, which may be
processed in an order that is different to their spatial order: this can lead to visible discontinuities.
The Navigator RIP does not support error diffusion directly but Harlequin Dispersed Screening
has some of the same random visual qualities while remaining predictable with respect to
behavior on physical output devices. Also, output plugins can implement error diffusion screening in their output, while accepting contone page buffers from the RIP.
executive
A special mode in some versions of the Navigator RIP which allows you to type in PostScript
language code and to see the interpreted results. You should only use this mode if you are familiar with the PostScript language.
exposure
Some imagesetters (for example, Pelbox) have an exposure setting which can alter the strength
of the laser which produces the image. In these cases, the exposure may be set using the Edit
Page Setup dialog box.
feature
A section of PostScript language code that may be automatically interpreted with any job, specified using the Edit Page Setup dialog box.
font
A set of type characters for use in a textual printing job. Fonts typically contain alphabetical and
numerical type, as well as common special symbols (such as marks of punctuation). The Navigator RIP is supplied with the industry standard 35 fonts for PostScript Level 2, and some special purpose fonts. Users can install third-party fonts as required.
halftone
A complex image which has been broken up into a series of very small dots so as to reproduce
it. A newspaper photograph is a good example of a halftone image. See Chapter 6, Screening.
halftone cell
A single dot in a halftone image.
hard copy
A physical copy of a document, on media such as paper or film.
hardware feed
Some imagesetters will automatically feed through media whenever a job is completed. In versions where the Navigator RIPs media management facilities are available, the RIP can take
account of any devices that do this.

Navigator RIP version 9

User Manual

401

hinted font
When previewing images on a low resolution screen (or when printing them on a low resolution
printer) text can look odd when rendered, because of the size of the output pixels becoming significant when compared to features in the characters. Hinted fonts can improve the appearance
of text rendered at low resolution or at very small sizes on higher resolution devices.

This figure shows a simple example for the letter h in low resolution without hinting (left) and
with (right). Here, the hinting has balanced the width of the vertical strokes.
See also font.
HDLT (Harlequin Display List Technology)
Provides a programmatic interface for customization between interpretation and rendering.
HDLT appears as a password-enabled option but is most likely to be used by your supplier as a
way of providing functionality that is not otherwise obvious in the RIP GUI.
HPS (Harlequin Precision Screening)
A proprietary technique used to reduce the effect of moirÐ© interference and improve the quality of a color separated image when using halftones. See Chapter 6, Screening.
IFD (Image File Descriptor, Image File Directory)
This structure used for each collection of information within a TIFF file, A typical IFD contains
several entries, most of which are pairs of tags and values. There can be several IFDs in a TIFF
file but the only type of TIFF/IT-P1 file to contain more than one IFD is the Final Page (FP) file.
See also TIFF (Tag Image File Format).
input plugin
A device driver which controls an input device connected to the RIP.
Input plugins have several uses; they are primarily used as methods in which input can be sent
to the RIP (for example, using a spool folder), but they can also be used as PostScript language
devices or data manipulation filters, and they can be used to perform asynchronous actions.
JDF (Job Definition Format)
JDF is an XML-based file format that is becoming the industry standard for the definition of job
tickets in pre-press workflows. Its main purpose is to facilitate the exchange of information
between printing applications and systems.
keyboard accelerator
A set of key presses which have the same effect as a mouse-based operation‚ such as selecting a
menu item‚ while probably taking less of a users time to perform.

402

User Manual

Navigator RIP version 9

lpi
Lines per inch. A measurement of halftone screen frequency. Lines per centimeter (lpcm) and
lines per millimeter (lpmm) are also offered by the RIP.
media
The various materials, such as paper or film, that are used in producing hard copy.
menu device
The menu device is the output device that provides the name of the Device menu, and receives
the commands generated by choosing options from the Device menu.
See also active device.
mirrorprint
An option in the Edit Page Setup dialog box which allows you to produce a mirror-image copy
of your job. See Chapter 5, Configuring Output Formats.
moirÐ© pattern
A printing effect that occurs when a color separation is printed with incorrect screen angles. It
is undesirable and can be minimized by the use of correct screen angles. See also HPS (Harlequin Precision Screening).
multiple device driver
A device driver which can drive more than one output device. Normally, you need a separate
device driver for each output device you are using. By using a multiple device driver, however,
you can use this one driver to run all devices of the types that it supports. For example, one multiple device driver might support all your Ultre and ExxtraSetter devices.
N-color
N-color is a name representing a family of systems of process colors other than the conventional
four-color CMYK system (and CMY and RGB). N represents a variable number of inks, which
can be less than four for economy in simple jobs such as forms printing or more than four for
high quality or HiFi color. Examples of N-color systems are the PANTONE Hexachrome Color
Selector system and Photo-ink technologies.
OPI (Open Prepress Interface)
OPI stands for Open Prepress Interface and was originally specified by Aldus Corporation. Systems using OPI enable designers to use relatively low-resolution and easy to handle images on
design workstations but to have higher quality images substituted for final output. The RIP supports both OPI and the similar DCS scheme.
output device
A computer peripheral capable of producing printed copy of a document, such as an imagesetter
or laser printer. See also active device, menu device.

Navigator RIP version 9

User Manual

403

output plugin
A device driver that controls an output device connected to the RIP.
page buffer
A file on disk used to store a page of interpreted output, before it is printed or previewed.
Depending on the page buffer mode in which you run the RIP, it can produce page buffers
always, or only when required. Once produced, page buffers can either be retained on disk, to
allow reprinting; or deleted after printing, to save space on your hard disk.
page imposition
The process of printing several pages, of, say, a pamphlet, on one sheet of media, so as to minimize the amount of trimming that needs to be done. For example, two copies of a four page A5
pamphlet could be produced from a sheet of A3 by printing the A5 pages in the pattern shown in
this figure:
Page 4

Page 1
Page 2

Page 3

The pattern needs to be printed on both sides of the A3 sheet, reversed vertically on one side.
Two copies of the pamphlet could then be produced simply by cutting the paper along the horizontal line, and folding along the vertical line. This process is much simpler than producing and
trimming each page separately and rearranging them so as to form a booklet.
Imposition is one of the applications dealt with in the PostScript language extensions provided
by the Navigator RIP.
Page Setup
In the Navigator RIP, a Page Setup is a named collection of settings used to process a PostScript
language job. All Page Setups are visible in the Page Setup Manager, which allows you to create
new Page Setups and to copy or edit existing Page Setups. Using the Input Controller, you can
create multiple ways of sending a job to the RIP, each with an associated Page Setup, so that any
user can choose an input that applies the desired settings for each job. For full details, see Chapter 5, Configuring Output Formats.
partial page buffer
An incomplete page buffer. A partial page buffer does not yet contain all of the details of the
page being rendered. The RIP produces partial page buffers when there is insufficient physical
memory to interpret a job while holding a complete page in memory.
PDF
PDF has these meanings:

404

User Manual

Navigator RIP version 9

Portable Document Format. A PDF file describes pages, using graphic capabilities similar to
those in the PostScript language. Compared to PostScript language files, PDF files are typically
smaller and more portable to different printers while producing more predictable output. This is
the most common usage of PDF.
Printer Description File or Printer Definition File. Files, special to a creating application or to
the Netware operating system, that define the characteristics of a printer. Many more applications support PPD files, which have a similar purpose.
Photo-ink
Photo-ink technologies use different densities (light and dark versions) of one or more colorants. A capable system is then able to use the light ink in highlight areas and the dark ink where
more colorant is required. A typical set of colors is light cyan, dark cyan, light magenta, dark
magenta, yellow, and black.
pica
A unit of measurement in printing. Usually, equal to 12 points or 0.166 inches.
pixel
A single element of display, or of an image.
plug-in module
A software product that can be interfaced with the RIP to provide extra features or customizations.
point
A unit of measurement used in printing. There are 12 points to a pica. Historically, there have
been several definitions of the point: a common definition is 0.01384 inches, or approximately
72 points to the inch. The PostScript language uses a default user unit which is exactly 1/72 of
an inch (0.01389 inches or 0.3528 mm). This unit is frequently called a point, and this is the definition used by the RIP.
PPD
PostScript Printer Description. Each PPD is a file that defines the characteristics of a printer.
When installed correctly, a PPD customizes an operating system printer driver or a creation or
page layout application to optimize PostScript language jobs for the printer described by the
PPD. Many imagesetter and printer manufacturers provide PPDs for the printers that they produce.
precision screening
See HPS (Harlequin Precision Screening).
prep file
A PostScript language header file, which is interpreted before the main job processing in order
to provide a standard setup to be used by a range of different jobs.

Navigator RIP version 9

User Manual

405

preview
To view an interpreted job on the screen before producing a hard copy of it.
profile
In printing and color science, a profile is a description of the color performance of an input or
output device such as a scanner, printer, or display monitor. With suitable software, it is possible
to transfer color definitions between different devices, and to have the same colors appear on
each.
There is an open standard for profiles promoted by the International Color Consortium (ICC),
supported by many device manufacturers and vendors of profile creation tools. The ColorPro
color management options within the
RIP are supplied with several profiles and can install additional ICC profiles. There are several
types of profile; see the ColorPro User Guide for more details.
progressive proof
A proof or series of proofs in which (some) intermediate stages of laying down the colors are
shown. For example, a CMYK page is usually printed in the order yellow, magenta, cyan, and
finally black. The full set of corresponding progressive proofs would be Y, Y+M, Y+M+C, and
Y+M+C+K. If the page is to be printed with two passes on a two-color press, the most useful
proofs are likely to be the ones representing the product of each pass on the press: Y+M and
Y+M+C+K.
proof
A preview or hard copy of some or all of the characters in a font, or of an image. The RIP can
create various forms of proofs, as composite output, as a set of separations, or as a progressive
proof‚ to suit the needs of the situation.
Raster Image Processor
See RIP.
rendering
The term rendering refers to the process of creating a bitmap image or raster from the interpreted page description. This bitmap can be used by the output device to produce a visible
image.
resolution
The degree of detail with which an image is reproduced, usually measured in dots per inch (dpi).
The higher the resolution, the greater the detail in which the image will be reproduced. The resolution of a computer screen is usually around 72 dpi, whereas an image detailed enough to
print in a magazine may be closer to 2500 dpi.

406

User Manual

Navigator RIP version 9

RGB
A color representation scheme (or color space) where separations in red, green, and blue are
overlaid to create full-color images. The RGB scheme is usually used by computer monitors and
televisions, and by some printers.
RIP
Raster Image Processor. A standard term used to name programs or devices which take an
image of some description‚ text, line (vector) drawings, or photographic images‚ and convert it
into a bitmap for display on a computer screen or output on an imagesetter. The final bitmap is
the raster referred to in the name.
roam
To preview interpreted jobs in the Output Controller, available only in either of the multiple
modes. See also preview.
rosette
The pattern in which halftone cells are arranged in a separated image. This figure shows how
the RIP can produce rosettes which either have dark centers (on the left of the diagram) or clear
centers (on the right of the diagram, with the central dot removed).

screen angles
The angles at which the halftone screens are placed in relation to one another.
screen frequency/ruling
The density of dots on the halftone screen, commonly measured in lines per inch (lpi).
spread
The process of printing a small border just outside the edges of graphics to make them look bigger. Spread and choke are often used as part of trapping to protect against misregistration of
color separations.
stop / start
The ability of an output device to stop and restart during printing.
tag
In TIFF or TIFF/IT files, an Image File Descriptor (IFD) contains a number of entries (tags),
each consisting of an unique tag number from 0 to 65535, and its corresponding value or values.
Tag numbers are generally determined by the TIFF 6.0 or TIFF/IT specifications, and each has a
specific meaning. (In TIFF 6.0, tag numbers above 32767 are vendor defined.) For example, the
tag number for the tag named DotRange is 336.

Navigator RIP version 9

User Manual

407

throughput
Generally, the efficiency with which images are interpreted and produced. In the Navigator RIP
specifically, throughput is another term for Multiple (Parallel) mode, where interpreting and
output are carried out in parallel, and the Output Controller is used to manage the printing of
jobs. See Chapter 4, Navigator RIP Output Methods.
TIFF (Tag Image File Format)
The basic TIFF file format. Without further details, you cannot assume that something described
as being a TIFF file conforms to the TIFF 6.0, TIFF/IT, or TIFF/IT-P1 standards.
Note: TIFF/IT is sometimes referred to as Transport Independent File Format for Image Technology. This name refers to the same format as described in Chapter 8, Configuring Input.
trapping
Techniques used to tackle undesirable printing effects caused by misregistration of printed separations, optical effects, and so on. See spread and choke. See also Chapter 13, Color Separation.
virtual memory
Virtual memory has these meanings:
In PostScript terminology, virtual memory or VM is a pool of memory used for the storage of
composite objects such as strings, arrays, and dictionaries. PostScript language compatible
interpreters are free to implement VM using all appropriate types of memory in their working
environment.
In computer operating systems, virtual memory is disk memory used as an extension to physical
memory, built-in memory, or RAM. Many operating systems support the use of virtual memory.

408

User Manual

Navigator RIP version 9

A
Abort if calibration on
Page Setup option 138
Abort Printing File command 217
Abort the job if any fonts are missing
page setup option 138
Accelerators
keyboard equivalents for menus 4
Accurate color display 85
Acrobat 9 221
AcroForms 222
Active device 397
Active queue 60
Add Channel dialog 330
Add showpage at end of job
page setup option 138
Adding
a new input plugin 194
a new page feature 134
See also Installing
Adjusting tone curves 144
Advance n inches command 244
Advanced Media Saving 112
Advancing media 243
Allow stop /start
configure RIP option 180
Allow use of all available memory 187
Always, delete option in Output Controller 65
Angles
screens expected in incoming job 358, 364
screens for process colors 155
Anti-aliasing
defined 397
AppleTalk 196
displayed job names 63
input plugin 192
Aspect ratio 397
Asynchronous actions 192
Asynchronous Socket
input plugin 192
Asynchronous Socket Quit
input plugin 193
Automatic cassette selection 113
Automatic Prep loading
Configure RIP option 186
B
Background reading 154
Banding 397
Black generation 362, 397
overriding in job 363
Bootlist file 32
Bromide. See Media
Buffer full message 374
Buffer space low message 374
Buffers
network 183
page, defined 404
printer 184
Busy message 374
Busy or off-line message 375

C
Caldata folder 30
Calibration
and color process work 302
calibration sets 304
creating a calibration set 309
densitometer use 309
entering data 311
factors affecting accuracy 317
for positive and negative 315
maintenance strategies 313
printing a target 305
printing presses 318
screen frequencies 315
smoothing 312
stopping output without calibration set 138
turning on in Edit Page Setup dialog 143, 144
Calibration Manager dialog 312, 323
saving calibration sets 315
Calibration sets
copying 326
creating from imported files 332
creating from published data 331
editing 314
naming 329
operating on several sets 326
saving 315
status in Calibration Manager 325
Cassette Manager dialog 250
Cassette Manager Edit dialog 251
Cassettes 398
changing 68
creating or deleting 250
media management 242
setting up monitoring 250
Categories folder 30
CFF fonts 288
Chain screening 171
Change roam color
button in Info dialog 367
dialog 367
Channels
in calibration sets 329
Character identifier fonts 288
Charstrings folder 30
Choke 398
CID fonts 288
CIDFont folder 30
CIP3
and PPF files 398
defined 398
CMap folder 30

CMYK 18, 339, 342, 398
Color
changing 68
colorrenderings folder 30
device-independent, and ColorPro 320
operators 137
Color management
in a PDF job 385
instructions in a job 385
supplied with an output plugin 143
Color menu
summarized 40
Color process work
need for calibration 302
Color separation 150, 398
controlling separations 347
for HCS and HDS 176
identifying in the Output Controller 63
knockouts 339, 361
labeling pages in Output Controller 366
misregistering separations 340
overprinting 341
producing color images 341
roaming color images 366
roaming in false colors 367
trapping 365
using Level 1 spot colors 350
Color separations
overprinting 361
Color Setup Manager dialog 354
Color space 398
converting with ColorPro 338
in PostScript language jobs 343
reproducing 335
Colored separations 346
ColorPro
and press calibration 318
device-independent color 320
memory required 26
menu commands 40
Colors
accuracy in Roam and Preview 85
Colorspaces folder 30
Communications failed message 375
Compact font format fonts 288
Compatibility setting
for PostScript LanguageLevel 136
Complete folder 30
Composite fonts 22, 288, 295, 398
CID 288
efficient use of 295
installing 291
memory required 26
preloading 292
Compressing
page buffers 21, 181
setting required compression ratio 181
Config folder 30
Configuration settings
backing up 33
Configure RIP dialog 178
compressing page buffers 373
Configure RIP options
allow stop / start 180

automatic prep loading 186
minimum compression ratio 181
minimum free disk space 188
Startup prep 186
Configure RIP Options dialog 180
Configuring
Configure RIP dialog 177
extras in Configure RIP 185
for features of output devices 110
input plugins 196
minimum free disk space 188
output to PDF Raster files 101
output to TIFF files 87
spool folder 201
Control key 4
Controlling
inputs 193
output of jobs 59
separations 347
Conventions
fonts 4
instructions in text 5
Copies
number printed from page buffer 67
number to print 67
Copy Channel Data dialog 330
Core RIP 398
Cover open message 375
Crdgen folder 30
Crop marks 399
Current cassette 399
Current color space 399
Current device 399
Cut media no feed command 245
Cut media with feed command 245, 249
Cutting media
in Media Manager 248
Cyan, Magenta, Yellow, Black
See CMYK
D
Data rate 399
Data transfer failed message 375
Data underrun
and printer buffer size 184
avoiding with Multiple mode 71
defined 399
Data underrun message 375
DCS
defined 399
Delete Fonts command 294
Deleting

fonts from the Harlequin RIP 294
input plugins 196
jobs after printing 64
page buffers 64, 179
Densitometer
using for calibration 309
Desktop Color Separation. See DCS
Developer
online processor 255
Deviated frequency 165
Device driver 108, 399
Device Manager dialog 109
Device menu 35
Device type 108
Device-independent color
in PDF jobs 387
Devices
None 87
output, defined 403
Preview 83
preview 86
Raster 100
TIFF 87
Devices folder 30, 370
Dial, progress 46
Dialogs
language used in 188
Directories
structure used by the RIP 29
See also Folders
Disable output check box 61
Disabling
individual inputs 196
media management 247
output of jobs 61
stopping all enabled inputs 196
Disk space left for system option 188
Disks
failure to RIP to disk 373
preserving free space 188
required data rate 29
DLD1 fonts 289, 400
Don‚Äôt let files silently substitute Courier for missing fonts check box 141
Dot gain 400
and screening options 154
compensated by calibration 303
Dot shapes 400
elliptical 157
line 158
round Euclidean 157
setting in Screening Setup 156
square 158
square Euclidean 158
dpcm (dots per centimeter) 400
dpi (dots per inch) 400
dpmm (dots per millimeter) 400
Draft
printing on each page 134
Drum recorders 241, 245
time saving 119
Duotones
in Photoshop EPS files 141

E
Edit Calibration dialog 311, 327
Edit Page Setup dialog 77, 251
retargeting press calibration 144
turning on calibration 143, 304
turning on press calibration 144
turning on tone curve calibration 144
types of option 78
Edit Plugin dialog 195, 196
Edit Style dialog 347
extra grays 162
with screening options 149
Editing
calibration sets 311, 314
EDS. See Error diffusion
Elliptical dot shapes 157
Emulate old imagemask behavior
page setup option 137
Emulsion up/down. See Mirrorprint
Enable Feature dialog 234
Enabling
extra features in the Harlequin RIP 170
extra grays in HPS 164
input plugins 196
optional features 185
Encapsulated PostScript (EPS) 400
Encodings folder 30
EPSF
format files 138
Error diffusion
defined 400
in output plugin 148
Error folder 30
Errors. See Problems
Executive 23
defined 401
starting up 239
Executive window 239
Exposure 401
changing 68
choosing for calibration 306
Edit Page Setup option 106
Exposure sweeps
printing 307
Extensions folder 30
Extra grays
enabling 164
Extras
enabling optional features 185
F
Factory Settings folder 30

Fast color display
in Roam and Preview 85
Fast patterns
page setup option 137
Feature check box 133
Features 133, 401
See also Page features
Feeding media in the Media Manager 248
File names
mapping 33
FILEMAP.DAT file 33
FILEMAP.PS file 33
FILERED.PS file 33
Files
adding showpage to EPSF jobs 138
initialization (HqnStart) 292
name mapping from PostScript names 33
Film. See Media
FlatPgbDir folder 31
FM screening 171
Folders
caldata 30
categories 30
charstrings 30
CIDFont 30
CMap 30
colorrenderings 30
colorspaces 30
complete 30
Config 30
Crdgen 30
Devices 30
devices 370
encodings 30
Error 30
Extensions 30
Factory Settings 30
FlatPgbDir 31
fonts 31
FontSet 31
forms 31
halftones 31
icccrd 31
IdiomSet 31
Inputs 31
MediaSavingDir 31
Messages 31
NamedColor 31
NamedColorOrder 31
Page Features 31
Page Setups 30
PageBuffers 31, 179, 373
Passwords 31
patterns 31
PrepFiles 32
procsets 32
ReproductionCriteria 32
Screenin 32
Screens 31, 32
Separation Features 32
Spool 32
structure used by Harlequin RIP 29
SW 179
Sys 32

targeteps 32
tmp 32
TrapParams 32
Usr 32
Utilities 33
WorkSpace 33, 178
Font conventions
in this manual 4
instructions in text 5
Fonts 21, 401
CFF 288
CID (character identifier) 288
compact font format 288
composite 22, 288, 292, 295
composite fonts 288
DLD1 format 289
folder 31
hinted 288
installing 289
installing composite fonts 291
listing 292
minimum font set 374
preloading 292
problems with 373
Proof fonts in long format option 294
proofing 292
removing from the RIP 294
response to jobs with missing fonts 138
saving a backup file 33
TrueType 288
Type 0 fonts 288
Type 1 fonts 288
Type 3 fonts 288
Type 32 288
Type 4 fonts 288
Type 42 288
types of 288
FontSet folder 31
Forms folder 31
Frequency Modulation. See FM
Frequency, deviated 165
G
Genlin
configuring 391
introduction 389
GIF (Graphics Interchange Format) 232
Gray levels
increasing number with HPS 164
introduction 159
limiting number of 162, 164

H
Halftone 401
cells 150, 401
deviated frequency (HPS) 165
frequency 302
strategies 149
Halftones folder 31
Halftoning 341
description 149
See also Screening
Hand speed option 86
Hard copy 401
Hardware feeds 401
using 254
Harlequin Chain Screening. See HCS
Harlequin Dispersed Screening. See HDS
Harlequin Micro Screening. See HMS
Harlequin Precision Screening. See HPS
Harlequin Screening Library. See HSL
Harlequin RIP
failure to appear on the network 383
folder structure 29
monitoring 55
quitting 41
resetting to standard configuration 188
starting up 33
Harlequin RIP window 55, 178, 187, 292
HCS
introduction to Harlequin Chain Screening 171
HD Photo files
printing 231
HDLT
password 185
HDLT (Harlequin Display List Technology)
defined 402
HDS
compared to lpi measures 173
HDS-Light 170
introduction 171
varieties of 172
Height
page default 120
Held queue 60
Hex
N-color system 336
Hexachrome
PANTONE Color System 336
HiFi color
N-color system 336
Hinted fonts 288, 402
HMS
calibration for 175
introduction to Harlequin Micro Screening 175
varieties of 175
Hold and Reprint command 72
HPS 402
and gray levels 164
background reading 154
enabling HPS 2.0 166
introduction to Harlequin Precision Screening 164
memory required 26
options dialog 165
performance 169
problems and cures 167

used with pattern screens 169
HqnOEM
initialization file 292
HqnOEM file 32
HqnProduct file 32
HqnStart file 32
HSB 342
HSL
enabling screen sets 170
problems and cures 176
selecting screen sets 171
Hue, Saturation, Brightness. See HSB
I
ICC
profiles, defined
ICC profiles
definition 17
icccrd folder 31
IdiomSet folder 31
Image interpolation 81
Image replacement 133
imagemask
emulating old behavior of 137
Images
previewing 47
printing color 341
roaming 47
scaling 132
Imagesetters
linearization 303
required data rate 28
selecting output devices 80
See also Output devices
Import Measurements dialog 332
Imposition 133
See also Page imposition
Imposition Manager 260
Info dialog 67
access to Page Layout dialog 121
Ink low message 375
Ink out message 375
Input Channel Edit dialog 196
Input Controller dialog 193
Input methods
JFIF files 231
JPEG files 231
Input Modes
printer problems 383
Input plugins 402
adding new 194
configuring 196

deleting 196
editing 196
enabling 196
introduction to 18
managing 193
types supplied 192
Input Queue mode 51, 54
Input sources. See Input plugins
Inputs
disabling individual inputs 196
starting up 51
stopping 37
stopping all enabled inputs 196
Inputs folder 31
Install Fonts dialog 290
Installing
composite fonts 291
fonts 289
printer interface card 29
Installing Harlequin RIP
ability to RIP a job 27
printer data rates 28
Instructions in text 5
Interface card failed message 375
Interface cards
installing 29
International Color Consortium. See ICC
Invalid clipping message 375
Invalid resolution message 375
J
JDF
and CIP4 398
JDF (Job Definition Format) 402
JFIF files
input methods 231
printing 231
Job Description Format
See JDF
Jobs
altering parameters 66
altering parameters for all pages 69
deleting automatically after printing 64
preserving from deletion 67
reprinting 62
screen settings and overrides 163
timeouts 182
JPEG files
input methods 231
printing 231
K
Keyboard accelerators 4, 402
Keyboard shortcuts 4
Knockouts 339, 361
L
Language
choice at first use 34
used in user interface 188
LanguageLevel 1
setting compatibility 136
LanguageLevel 2

setting compatibility 136
LanguageLevel 3 136
setting compatibility 136
Laser diode failed message 375
Late color management 360
Level 1 PostScript language jobs
compatibility setting 136
Level 2 PostScript language jobs
compatibility setting 136
Level 3 PostScript language jobs
compatibility setting 136
Limit number of distinct gray levels 164
Limit screen levels 164
Line screening
in halftoned images 158
Linearization 303
See also Calibration
List Fonts command 292
Localization
language in user interface 188
Locking page buffers 67
LOGFILE 292
in SW folder 33
messages from Harlequin RIP 55
Low media warnings 254
Low power message 375
lpcm (lines per centimeter) 403
lpi (lines per inch) 403
lpmm (lines per millimeter) 403
M
Margins
setting in Page layout 120
Measurements
choice for calibration data 330
Media 403
advancing 243
cutting 243, 244, 246, 248, 254, 255
feeding 244, 246, 248
hardware feeds 254
low media warnings 254
monitoring 249, 256
remaining length 252
saving (optimization) 119
saving film 134
type 252
width 252
Media management 22
configuring 135
disabling 247
introduction 241
Media Manager dialog 246

Media Monitor 256
Media saving
automatic cassette selection 113
Fill whole drum (for part drum devices only) 115
Margin between jobs 114
Margin between pages 114
Name flat after 116
Order of pages on flat 115
Print Flat 114
Switch roam color to black 115
Time to wait between pages 114
Track flat width (for roll fed devices only) 115
Tracking media width 113
MediaSavingDir folder 31
Memory
allocating 186
increasing 186
requirements for disk space 27
requirements for RAM 26
temporary allocation 186
Memory for RIP option 187
Memory reserve for RIP option 187
Memory Statistics 178
Menu device 403
Menus
changes in displayed commands 39
description of 35
language used in 188
Messages
in LOGFILE 55
language used in 188
warnings and errors 369
Messages folder 31
Microsoft Windows
Help and manuals 4
Minimum free disk space
Configure RIP option 188
Minimum memory left for system option 187
Mirrorprint 403
Edit Page Setup option 122
Misregistering separations
effect 340
minimizing effect 365
Missing fonts
aborting jobs with 138
Modes
Multiple 71
Multiple (Parallel) 70
page buffering in the Harlequin RIP 57
Single 72
Single (If Required) 72
MoirÐ© pattern 403
reducing 154
reducing with HPS 164
Monitoring
Harlequin RIP 55
media 249, 256
Monochrome separations 346
Multiple (Parallel) Mode
page buffer modes compared 58
Multiple (Parallel) mode
advanced details 70
and data underrun 184
and Media Monitor 256

compared to Single (if required) 73
Multiple copies
printing 67
Multiple device drivers 107
adding a new device 109
changing configuration 109
defined 403
deleting a device 109
Multiple mode
advanced details 71
and Media Monitor 253
page buffer modes compared 58
N
Name flat after 116
named pipes
as inputs 197
NamedColor folder 31
NamedColorOrder folder 31
N-color
defined 403
N-color systems
distinct colorant 336
HiFi color 336
in job specification 342
introduction 336
output support for 18
photo-ink 336
Negative
calibrating for output 315
printing in 67
Networks
Harlequin RIP fails to publish 383
Never, delete option in Output Controller 65
New Page Setup dialog
basic use 78
example of use 43, 52
No cassette message 376
No power message 376
No take-up cassette message 376
None device 87
NT Pipe
input plugin 192
Number of copies to print
page setup option 139
O
Off-line message 376
Online developer 255
Open Prepress Interface
see OPI 403
OPI

defined 403
OPI, support for 133
Optional features
enabling 185
Output Controller
disabling output 61
labeling of color separation pages 366
warning messages in 374
Output Controller dialog 60, 121
Always option 65
identifying color separations in 63
locked pages in 373
low media warnings in 254
Never delete option 65
numbering of separation pages in 63
warning messages in 374
When necessary delete option 65
Output devices 7
changing 68
defined 403
printing to 105
selecting 80
Output plugins
defined 404
introduction to 18
multiple, defined 403
Overprinting 341, 361
controls 361
Override angles in job 164, 351
Override black generation in job box 363
Override dot shape in job 156, 163
Override frequency in job 159, 163
Override separations in job 350
Overriding job settings 163, 350
P
Pack drum 134
Page buffers
altering all in job 69
altering parameters 66
compressing 21, 181
defined 404
deleting 64, 179
from older versions of the Harlequin RIP 69
locking 67
modes 57
moving in Output Controller 61
resubmitting 134
roaming 66
summary of modes 73
Page features
adding 134
Draft 134
Image replacement 133
imposition 133
OPI 133
Pack drum 134
PGB hot folder 134
printing Draft on each page 134
reporting on spot colors 133
resubmitting page buffers 134
saving film 134
Page Features folder 31
Page imposition 23, 133, 377, 404

Page Layout dialog 68, 120
Page Setup
definition 404
exposure 106
Mirrorprint effect 122
negative effect 122
PDF Raster output device 100
Rotate effect 122
saving configurations 79
saving setups 19
TIFF output device 87
Page Setup Manager dialog 76
reordering list of page setups 77
Page Setup Option Extras dialog 140
Page Setup Options dialog 135
abort if calibration does not match 138
abort if fonts are missing 138
add showpage 138
emulate old imagemask behavior 137
fast patterns 137
number of copies to print 139
remove color operators 137
run prep at start of job 136
setting the LanguageLevel 136
Page Setups folder 30
Page size
specifying default 120
Page stop-started message 376
PageBuffers folder 31, 179, 373
Pantone Matching System 337
Paper jam message 376
Paper low message 376
Paper out message 376
Paper. See Media
Partial page buffer 20, 187
defined 404
Passwords folder 31
patterns folder 31
PDF files
color management 385
input methods 229
printing 218
setting options 225
special treatment 229
two definitions 404
PDF jobs
color management in 387
PDF Options dialog 225
PDF Raster
Configuring files 101
naming files 102
Output device 100

PDF raster
creating files 100
PDF/VT 219
PDF/X Color management 219
PDF/X standards 218
PelBox. See imagesetters
Per renderer memory 183
Performance
Rainbow Islands test image 73
Seybold Musicians test image 28
performance
requirements 25
PGB hot folder 134
Photo-ink
defined 405
N-color system 336
Photoshop images
processing jobs containing 385, 386
pica 405
pipes
named pipes as inputs 197
Pixel 405
Plug-in module 405
point 405
Portable Document Format. See PDF files 218
Positive. See Negative
Post processing
TIFF files after output 98, 104
Post processing substitution codes 98
PostScript language
access from executive 239
applied to jobs in page features 133
handling Level 1 language jobs 136
handling Level 2 language jobs 136
PostScript Printer Description. See PPD
PPD
defined 405
PPF
file format and CIP3 398
Precision screening. See HPS
Preloading
composite fonts 292
fonts in the Harlequin RIP 292
Prep file 405
PrepFiles folder 32
Preseparated jobs
recombining 351
rejecting 351
Press calibration
alternative uses 320
in Edit Page Setup dialog 144
introduction 318
See also Calibration
Preview
defined 406
images 21, 47
See also Roaming
Preview window 84
Print calibrated press target 322
Print calibrated target 312, 316, 322
Print Calibration dialog 307, 321
Print exposure sweep 322
Print File command 216
Print File dialog 216

Print File menu 217
Print Production Format
See PPF
Print uncalibrated press target 322
Print uncalibrated target 321
Printer buffer 184
and data underrun 184
and roaming large page buffers 184
Printer Caught Up message 376
Printers
installing interface cards 29
required data rate 28
See also Output devices
Printing
calibration targets 321
color images 341
draft on each page 134
exposure sweeps 307
files 216
HD Photo files 231
in mirror image 122
in negative 122
in rotated orientation 122
JFIF files 231
JPEG files 231
multiple copies 67
PDF files 218
PostScript language files 217
setting PDF options 225
several copies 139
several files 217
TIFF/IT files 234
using a different press 144, 304
using special effects 133
XPS Documents 230
Printing PDF files
Acroforms 222
PDF/X standards 218
PDF/XColor management 219
Printing PDF version 1.4 220
Trapping 220
Problems
curing 369, 378
failure to RIP to disk 373
with fonts 373
with HPS 167
with HSL 176
with TIFF/IT files 378
Process colors
changing the angles 155
Process work. See Color
Processor, online developer 255

procsets folder 32
Profiles
ColorPro feature 325
defined 406
Progress box 49, 63
media management 253
warning messages in 374
Progress dial 46, 51
Progressive proofs
defined 406
Progressive separations 346
Proof Fonts dialog 46, 293
Proofing fonts 292
in long format 294
Proofs
defined 406
progressive, defined 406
Q
Queues
active 60
held 60
transferring pages between 61
Quitting
Harlequin RIP 41
R
RAM. See memory
Raster Image Processor
defined 406
Read dial 47
Recombination
features requiring 343
Recombine preseparated jobs
and composite jobs 353
check box 351
memory requirements 26
suitable jobs 352
Red, Green, Blue. See RGB
Reduced Preview window 84
Reduced roam 48, 66, 84
Reduced Roam window 84
Reject preseparated jobs 351
Remaining length of media 252
Remove color operators
page setup option 137
Removing
fonts from the RIP 294
Rendering 406
Reordering
page setups 77
Reprinting jobs 62
ReproductionCriteria folder 32
Requirements
data rate to printer 28
disk data rate 29
disk space 27
minimum font set 374
RAM 26
Resetting
Harlequin RIP 188
RIP configuration 188
Resolution 406
resolution

setting 81
Resubmitting, page buffers 134
Reverse See Negative
RGB 18, 407
in color composites 342
Right reading. See Mirrorprint
RIP
defined 407
RIP configuration
PageBuffers folder 179
resetting 188
WorkSpace folder 178
Ripping to disk
failure 373
Roam button 47, 66
Roam Options dialog 85
Roam window 84
Roam, defined 407
Roaming
accurate color display 85
and disable output 66
changing the displayed colors 367
description of Reduced Roam window 84
description of Roam window 84
hiding separations 85
images 47
large or multiple pages and printer buffer 184
options 85
reduced roam 48, 66, 84
separations 366
setting hand speed 86
several pages 66, 84
Rosette 407
Rotate
Page Setup effect 122
Round Euclidean dot shapes 157
RS232. See Serial
Run prep at start of job
page setup option 136
S
Save Setup dialog 53
Saving
a backup of all fonts 33
all configuration settings 33
media or time 119
page setup configurations 79
separations styles 354
Scaling
the output image 132
Screen angles
definition of 151

expected in incoming job 358, 364
glossary entry 407
Screen frequency 151, 407
and calibration sets 315
and gray levels 160
overriding 159
specified in job 159
Screen levels
limiting 164
Screen sets
selecting 171
Screenin
Screenin folder 32
Screening 154
and separations style 147
chain 171
error diffusion 148, 400
extra gray levels 164
FM 171
HDS 171
HMS 175
HPS 164
overview of methods 16
spot functions 156
Screens
defined 151
Screens folder 31, 32
Searching for input symbol 194
Separate spot color duotones, tritones & quadtones to spot color plates check box 141
Separate spot color vignettes to the spot color plate
Illustrator 6 141
Illustrator 7 141
QuarkXPress 142
Separation Features folder 32
Separations 150
changing color 68
colored 346
features needing recombination 343
monochrome 346
page numbering in Output Controller 63
progressive 346
style and screening 147
Separations Manager dialog 344
Serial
input plugin 193
Setting the PostScript LanguageLevel 136
Settrap 366
Seybold
Musicians test image 28
Rainbow Islands test image 73
Shift key 4
Shortcuts
keyboard 4
Showpage operator 138
Simple imposition 259
activate 260
Annotations 274
Binding options 269
Configuration 261
Custom annotations 275
Example impositions 276
Front and back options 271
Gutter options 270
Input file formats 259

Manager 260
Marks options 273
Page Grid positioning options 272
Page options 267
Perfecting 266
Schemes 262
Surface options 265
Work & Tumble 266
Work & Turn 266
Single (if required) mode 72
compared to Multiple (Parallel) 73
page buffer modes compared 58
Single mode
advanced details 72
page buffer modes compared 58
Socket
configuring the input plugin 208
input plugin 192
See also sockets
Sockets
as input to the Harlequin RIP 205
requirements for use with the Harlequin RIP 206
Special effects
applied to jobs using page features 133
applied to jobs using page setup 121
Specifying
default page size 120
image scale 132
Spool folder 32
configuring 201
excluding files from processing 204
input plugin 192
multiple inputs 19
Spool Folder Configuration dialog 201
Spot colors
exact names required 349, 350
reporting on screen 133
Spot functions 156
See also Dot shape
Spread 407
Square dot shapes 158
Square Euclidean dot shapes 158
StandardCharStrings file 30
Starting up
executive 239
Harlequin RIP 33
inputs 51
output of jobs after earlier disabling 61
Startup prep
Configure RIP option 186
Status
area in tool bar 38

of a calibration set 325
Stop / start
defined 407
Stop Executive command 239
Stop Printing File command 217
Stopping
a print job 217
all enabled inputs 196
all inputs 37
Harlequin RIP 41
output of jobs temporarily 61
the computer running the Harlequin RIP 42
stopping
a print job 217
Stripping. See Page imposition
Substitute fonts
in jobs from Illustrator 141
or aborting the job 138
SW folder 179
Sys folder 32
T
Take-up full message 376
Take-up space low message 376
Targeteps folder 32
TCP/IP 192
Testing
calibration sets 312
testing
serial line input 212
Threads
option in Configure RIP dialog 182
Throughput
control 20
defined 408
Info dialog 66
system 59
TIFF (Tag Image File Format) 18, 87, 100
Configuring files 87
creating files 87
naming files 88
Output device 87
Post processing output files 98, 104
Post processing substitution codes 98
See also TIFF/IT files
TIFF 6.0 input 235
TIFF/IT files
data types 233
format and history 232
installation and requirements 234
password 186
printing 234
printing with spool folder 203
troubleshooting 378
Time saving (optimization) 119
Timeouts
on jobs 182
tmp folder 32
Tone curves
adjusting 144
creating and using 317
in Edit Page Setup dialog 144
introduction 317
Toner low message 377

Toner out message 377
Tool bar
introduced 36
status area 38
Transparency
PDF Check Abort 222
PDF Check Warning 222
PDF Page Alert 222
TrapParams folder 32
Trapping
defined 408
in QuarkXPress jobs 365
in the Harlequin RIP 365
TrapPro
menu commands 40
Trim Page check box
in Page Setup dialog 119
Trim page check box
in Info dialog 67
Troubleshooting. See Problems
TrueType fonts 288
Type 0 fonts 288
Type 1 fonts 288
Type 3 fonts 288
Type 32 fonts 288
Type 4 fonts 288
Type 42 fonts 288
U
UCR 359, 362
Ultre. See imagesetters
Undercolor removal 359, 362
Uninstalling
fonts 294
Units of measurement
dpcm 400
dpi 400
dpmm 400
lpcm 403
lpi 403
lpmm 403
pica 405
point 405
Unknown error message 377
Use late color management 360
Usr folder 32
Utilities folder 33
V
Version
file in SW folder 33
Vignettes

defined in spot colors 140
Virtual memory 408
allocating for the Harlequin RIP 187
virtual memory
setting 26
W
Warming up message 377
When necessary
delete option in Output Controller 65
Width
of media 252
page default 120
Windows
See Microsoft Windows
Workflows
for maintaining calibration 313
WorkSpace folder 33, 178
Wrong reading. See Mirrorprint
X
XPS Documents
printing 230

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Description                     : Harlequin RIP
Title                           : Harlequin RIP OEM Manual - Harlequin 8.3 Release
Creator                         : GGSL
Producer                        : Acrobat Distiller 9.3.2 (Windows)
Keywords                        : Harlequin RIP
Creator Tool                    : FrameMaker 7.1
Modify Date                     : 2011:11:29 13:28:15Z
Create Date                     : 2011:11:29 10:55:51Z
Document ID                     : uuid:e931caef-c945-4afe-aaed-a856749b5ac0
Instance ID                     : uuid:80214070-55b0-4882-b439-fc6c09542795
Page Mode                       : UseOutlines
Page Count                      : 444
Author                          : GGSL
Subject                         : Harlequin RIP

EXIF Metadata provided by EXIF.tools

Harlequin RIP OEM Manual 8.3 Release Navigator 9 User

Navigator 9 User Manual Navigator 9 User Manual

Navigation menu

Versions of this User Manual:

Views

Navigation