Autodesk Navisworks 2017 Supported Formats And Applications V3.1

Navisworks_2017_Supp.. Navisworks_2017_Supported_Formats_and_Applications_V3.1

User Manual: Navisworks 2017 Supported Formats and Applications V3.1

Open the PDF directly: View PDF PDF.
Page Count: 37

DownloadAutodesk Navisworks 2017 - Supported Formats And Applications V3.1
Open PDF In BrowserView PDF
Navisworks® 2017
Supported File Formats

Autodesk Navisworks 2017 Solutions
This document details support provided by the current release of Autodesk Navisworks 2017
solutions (including Autodesk Navisworks Simulate and Autodesk Navisworks Manage) for:





CAD file formats.
Laser scan formats.
CAD applications.
Scheduling software.

NOTE: When referring to Navisworks or Autodesk Navisworks 2017 solutions in this document this
does NOT include Autodesk Navisworks Freedom 2017, which only reads NWD or DWF files.
Product Release Version: 2017

Document version: 3.1
March 2016

© 2016 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof,
may not be reproduced in any form, by any method, for any purpose.
Autodesk, AutoCAD, Civil 3D, DWF, DWG, DXF, Inventor, Maya, Navisworks, Revit, and 3ds Max are registered trademarks or
trademarks of Autodesk, Inc., in the USA and other countries. All other brand names, product names, or trademarks belong to their
respective holders. Autodesk reserves the right to alter product offerings and specifications at any time without notice, and is not
responsible for typographical or graphical errors that may appear in this document.
Disclaimer
Certain information included in this publication is based on technical information provided by third parties. THIS PUBLICATION AND
WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE REGARDING THESE MATERIALS.

Autodesk Navisworks 2017 Solutions

Contents
Supported CAD File Formats ......................................................................................................................... 7
Supported Exporters ................................................................................................................................... 10
Supported Laser Scan Formats .................................................................................................................... 11
Supported Scheduling Software .................................................................................................................. 12
Supported Applications ............................................................................................................................... 13
Autodesk ................................................................................................................................................ 13
AutoCAD 2017 .................................................................................................................................... 13
AutoCAD Architecture 2017 ................................................................................................................ 13
AutoCAD MEP 2017 ............................................................................................................................ 14
Autodesk Plant 3D 2017 ...................................................................................................................... 14
AutoCAD Civil 3D 2017 ....................................................................................................................... 14
Autodesk CAD-Duct............................................................................................................................. 15
Autodesk Inventor 5 to 11, 2009-2017 ................................................................................................ 15
Revit 2017 ........................................................................................................................................... 16
Revit Architecture 2017 ....................................................................................................................... 16
Revit Structure 2017 ............................................................................................................................ 16
Revit MEP 2010-2017 .......................................................................................................................... 18
Autodesk 3ds Max 2017 ...................................................................................................................... 18
Autodesk Maya ................................................................................................................................... 18
Bentley.................................................................................................................................................... 19
AutoPLANT.......................................................................................................................................... 19
MicroStation J ..................................................................................................................................... 19
MicroStation v8 to 8.5, XM (8.9) ......................................................................................................... 20
ProSteel 3D (formerly from Kiwi Software GmbH) ................................................................................ 20
TriForma J............................................................................................................................................ 21
TriForma v8 to 8.9 ............................................................................................................................... 22
Graphisoft ............................................................................................................................................... 23
ArchiCAD 16 to 19 .............................................................................................................................. 23
Constructor 2007 to 2010 ................................................................................................................... 23
AceCad ................................................................................................................................................... 23

Table of Contents | 3

Autodesk Navisworks 2017 Solutions
StruCad ............................................................................................................................................... 23
auto.des.sys ............................................................................................................................................ 23
form.z ................................................................................................................................................. 23
Adobe Systems Inc. ................................................................................................................................. 24
PDF ..................................................................................................................................................... 24
AEC......................................................................................................................................................... 24
CADPIPE .............................................................................................................................................. 24
AVEVA .................................................................................................................................................... 24
PDMS .................................................................................................................................................. 24
CADopia ................................................................................................................................................. 25
IntelliCAD ............................................................................................................................................ 25
CEA Technology ...................................................................................................................................... 25
Plant-4D .............................................................................................................................................. 25
COADE, Inc. ............................................................................................................................................ 25
CADWorx Plant ................................................................................................................................... 25
CADWorx Pipe..................................................................................................................................... 26
CADWorx Steel .................................................................................................................................... 26
COINS ..................................................................................................................................................... 27
BSLink ................................................................................................................................................. 27
Framing ............................................................................................................................................... 27
CSC ......................................................................................................................................................... 27
3D+ ..................................................................................................................................................... 27
Dassault Systemes ................................................................................................................................... 28
CATIA .................................................................................................................................................. 28
Google .................................................................................................................................................... 28
SketchUp (up to 2016)......................................................................................................................... 28
Hannappel SOFTWARE GmbH ................................................................................................................. 28
elcoCAD R4 ......................................................................................................................................... 28
Intergraph ............................................................................................................................................... 29
PDS ..................................................................................................................................................... 29
Informatix ............................................................................................................................................... 29
MicroGDS ............................................................................................................................................ 29

Table of Contents | 4

Autodesk Navisworks 2017 Solutions
ITandFactory ........................................................................................................................................... 30
CADISON............................................................................................................................................. 30
TRICAD MS .......................................................................................................................................... 30
Kubotek USA........................................................................................................................................... 31
CADKEY .............................................................................................................................................. 31
M.A.P...................................................................................................................................................... 31
CAD-Duct ............................................................................................................................................ 31
McNeel North America ............................................................................................................................ 32
Rhino .................................................................................................................................................. 32
Mensch und Maschine ............................................................................................................................ 32
RoCAD ................................................................................................................................................ 32
MultiSUITE .............................................................................................................................................. 32
MultiSTEEL .......................................................................................................................................... 32
Nemetschek ............................................................................................................................................ 33
Allplan ................................................................................................................................................. 33
PROCAD.................................................................................................................................................. 33
3DSMART ............................................................................................................................................ 33
PTC ......................................................................................................................................................... 33
Pro/ENGINEER ..................................................................................................................................... 33
CADDS 5 ............................................................................................................................................. 33
QuickPen................................................................................................................................................. 34
PipeDesigner 3D .................................................................................................................................. 34
DuctDesigner 3D ................................................................................................................................. 34
RAM International ................................................................................................................................... 34
CADstudio ........................................................................................................................................... 34
SolidWorks .............................................................................................................................................. 35
SolidWorks .......................................................................................................................................... 35
Tekla ....................................................................................................................................................... 35
Tekla Structures ................................................................................................................................... 35
Xsteel .................................................................................................................................................. 35
think3 ..................................................................................................................................................... 35
thinkdesign.......................................................................................................................................... 35

Table of Contents | 5

Autodesk Navisworks 2017 Solutions
UGS ........................................................................................................................................................ 36
I-deas .................................................................................................................................................. 36
Solid Edge ........................................................................................................................................... 36
NX (Unigraphics).................................................................................................................................. 36
FactoryCAD ......................................................................................................................................... 36
UHP Process Piping ................................................................................................................................. 37
FabPro Pipe ......................................................................................................................................... 37
x-plant .................................................................................................................................................... 37
x-plant................................................................................................................................................. 37

Table of Contents | 6

Autodesk Navisworks 2017 Solutions

Supported CAD File Formats
Navisworks has its own native file formats (.nwd, .nwf, .nwc); however Autodesk Navisworks
solutions can additionally read a combination of many popular 3D CAD formats. The following table
lists the CAD file formats currently supported by Autodesk Navisworks 2017 solutions.
Note: Unless stated below backward compatibility for previous versions cannot always be
guaranteed.

Format

Extension

File Format Version

Navisworks

.nwd .nwf .nwc

All versions

AutoCAD

.dwg, .dxf

Up to AutoCAD 2017

MicroStation (SE, J, V8 & XM)

.dgn .prp .prw

v7, v8

3D Studio

.3ds .prj

Up to Autodesk 3ds Max 2017

ACIS SAT

.sat .sab

All ASM SAT. Up to ACIS SAT v7

Catia

.model .session .exp .dlv3 V4, v5
.CATPart .CATProduct .cgr

CIS/2

.stp

STRUCTURAL_FRAME_SCHEMA

DWF/DWFx

.dwf .dwfx

All previous versions

FBX

.fbx

FBX SDK 2017.0

IFC

.ifc

IFC2X_PLATFORM, IFC2X_FINAL,
IFC2X2_FINAL, IFC2X3, IFC4

IGES

.igs .iges

All versions

Supported CAD File Formats | 7

Autodesk Navisworks 2017 Solutions

Format

Extension

File Format Version

Inventor

.ipt .iam .ipj

Up to Inventor 2017

Informatix MicroGDS

.man .cv7

v10

JT Open

.jt

Up to 10.0

NX

.prt

Up to 9.0

PDS Design Review

.dri

Legacy file format. Support up to
2007.

Parasolids

.x_b

Up to schema 26

Pro/ENGINEER

.prt .asm .g .neu

Wildfire 5.0, Creo Parametric 1.0-3.0

RVM

.rvm

Up to 12.0 SP5

Revit

.rvt

Up to 2017

SketchUp

.skp

v5 up to 2016

Solidworks

.prt .sldprt .asm .sldasm

2001 Plus-2015

STEP

.stp .step

AP214, AP203E3, AP242

STL

.stl

Binary only

VRML

.wrl .wrz

VRML1, VRML2

PDF

.pdf

All versions

Supported CAD File Formats | 8

Autodesk Navisworks 2017 Solutions

Rhino

.3dm

Up to 5.0

Supported CAD File Formats | 9

Autodesk Navisworks 2017 Solutions

Supported Exporters
The following table is a summary of 32 bit / 64 bit support for the Exporters included in Autodesk
Navisworks 2017.
32 bit
Support

64 bit
Support

Autodesk AutoCAD 2017

No

Yes

Autodesk 3ds Max 2017

No

Yes

Autodesk Revit / Architecture / Structure / MEP 2017

No

Yes

Microstation J

Yes

Microstation 8

Yes

Microstion 8.9

Yes

Microstion V8i

Yes

Product \ Exporter

Autodesk 3ds Max Design 2010

2015

ArchiCAD 15
ArchiCAD 16

Yes

Yes

ArchiCAD 17

Yes

ArchiCAD 18

Yes

ArchiCAD 19

Yes

Supported Exporters | 10

Autodesk Navisworks 2017 Solutions

Supported Laser Scan Formats
The following table lists the laser scan formats currently supported by Autodesk Navisworks 2017
solutions.

Format

Extension

File Format Version

Autodesk ReCap

*.rcs *.rcp

ASCII Laser File

.asc .txt

n/a

Faro

.fls .fws .iQscan .iQmod .iQwsp

FARO SDK 5.5

Leica

.pts .ptx

n/a

Riegl

.3dd

Version 3.5 or high

Trimble

Native file NOT supported. Convert Same as ASCII laser file
to ASCII laser file

Z+F

.zfc .zfs

SDK version 2.2.1.0

Supported Laser Scan Formats | 11

Autodesk Navisworks 2017 Solutions

Supported Scheduling Software
The following table contains a list of the project scheduling software and formats supported by
Autodesk Navisworks Simulate 2017 and Autodesk Navisworks Manage 2017.
Vendor

Product

File
Format

Notes

Asta

Powerproject
11 (11.x)
12 (12.0.03-042)

.pp

Requires Asta Powerproject to be installed on same
machine, to make link.

Microsoft

Project 2007 (SP1) to
2013

.mpp

Requires Microsoft Project to be installed on same
machine, to make link.

n/a

Requires Primavera v6 , 7 or 8 Engineering and
Construction to be installed locally or remotely, along
with the corresponding version of the Primavera SDK.
TimeLiner connects to the Primavera database via an
ODBC data source link.

n/a

Requires Primavera P6 v6, 7 or 8 Web Services installed
within a suitable Web Application Server such as Oracle
Web Logic or JBoss on the same machine as your P6
database.

.mpx

Does not require any project software to be installed.
This is the common project exchange format which can
be exported to from a number of scheduling packages.

Oracle

Oracle

Microsoft

N/A

Oracle Primavera
Engineering and
Construction
6.2.1 (SP4 Hot Fix 1)
7.0 (SP4)
8.2

Primavera P6 Web
Services
6.2.1 (SP1 Hot Fix 1)
7.0 (SP1 Hot Fix 1)
8.2
8.3

Microsoft Project
Exchange Format

CSV Exchange Format

.csv

Does not require any project software to be installed.
This is a common exchange format which can be
exported from a number of applications including,
Microsoft Excel.
Navisworks Simulate and Manage can additionally export
TimeLiner task information to this format.

Supported Scheduling Software | 12

Autodesk Navisworks 2017 Solutions

Supported Applications
The following table is a non-exhaustive list of CAD applications and properties currently supported
by Autodesk Navisworks 2017 solutions, along with any additional information that may be
necessary to review your project files in Navisworks software.
Exporter

Native
Format

Other
Format

Properties

Autodesk
AutoCAD 2017
AutoCAD Details
Other Formats

DWF, DWFx, DXF, 3DS, FBX

 Navisworks reads the native AutoCAD .dwg file format.
 Navisworks supports AutoCAD Point Cloud.
 Models can be exported from AutoCAD software as .nwc format. Export to .nwc file format is

only supported from AutoCAD 2011 onwards.

 Object properties, (such as Material Colors and Entity Handles) are also supported by Navisworks

and these can be viewed in the 'Properties' window. To open the Properties window, go to
View tab > Workspace panel > Windows drop-down > Properties.
AutoCAD Architecture 2017
AutoCAD Architecture Details
Other Formats

DWF, DWFx, DXF, 3DS, FBX

 Navisworks can read AutoCAD Architecture .dwg files, without the necessity to install an Object

Enabler.

 Models can be exported from ADT/AutoCAD Architecture software as either .nwc or .nwd

format. Export to .nwc file format is only support from AutoCAD Architecture 2011 onwards.

 Navisworks supports AutoCAD Architecture object properties and these can be viewed in the

'Properties' window. To open the Properties window, go to View tab > Workspace panel >
Windows drop-down > Properties. Automatic Properties are also supported for AutoCAD
Architecture.
 Autodesk Navisworks Simulate and Autodesk Navisworks Manage software support
ADT/AutoCAD Architecture textures.

Supported Applications | 13

Autodesk Navisworks 2017 Solutions

Exporter

Native
Format

Other
Format

Properties

AutoCAD MEP 2017
AutoCAD MEP Details
Other Formats

DWF, DWFx, DXF, 3DS, FBX

 Navisworks can read AutoCAD MEP.dwg files, without the necessity to install an Object Enabler.
 Models can be exported from Building Systems/AutoCAD MEP software as .nwc d format. Export

to .nwc file format is only support from AutoCAD MEP 2011 onwards.

 Navisworks supports Building Systems/AutoCAD MEP object properties and these can be viewed

in the 'Properties' window. To open the Properties window, go to View tab> Workspace
panel > Windows drop-down > Properties.
 Autodesk Navisworks Simulate and Autodesk Navisworks Manage software support Building
Systems/AutoCAD MEP textures.
Autodesk Plant 3D 2017
Autodesk Plant 3D Details
Other Formats

DWF, DWFx, DXF, 3DS

 Models can be exported from Plant 3D software as .nwc format. Export to .nwc file format is

only support from Autodesk Plant 3D 2011 onwards.

 In order to read an Autodesk Plant 3D.dwg file into Navisworks, you will need to install the

corresponding Object Enabler.
AutoCAD Civil 3D 2017
Civil 3D Details
Other Formats

DWF, DWFx, DXF, 3DS, FBX

 Navisworks supports AutoCAD Point Cloud.
 The Civil 3D native .dwg file can be read directly into Navisworks; however you will need to

install the corresponding Civil 3D Object Enabler (available to download from the Autodesk
website).
 Models can be exported from Civil 3D software as .nwc format. Export to .nwc file format is only
support from AutoCAD Civil 3D 2011 onwards.
 For Civil 3D 2017 object properties (such as Material Colors and Entity Handles) are also
supported by Navisworks and these can be viewed in the 'Properties' window. To open the
Properties window, go to View tab> Workspace panel > Windows drop-down >
Properties.

Supported Applications | 14

Autodesk Navisworks 2017 Solutions

Exporter

Native
Format

Other
Format

Properties

Autodesk CAD-Duct
CAD-Duct Details
Other Formats


DWG, DXF, 3DS

In order to read a CAD-Duct file into Navisworks, you either need CAD-Duct installed on the same
machine as Navisworks, or have the CAD-Duct Object Enabler installed. The CAD-Duct Object Enabler
can be downloaded from the CAD-Duct website, found under Support > Additional Files.



If CAD-Duct is installed, the Object Enabler is not necessary. Simply export to .nwc.
In Navisworks, object properties can be viewed in the 'CAD-Duct' tab in the 'Properties window.
To open the Properties window, go to View > Control Bars > Properties.

Autodesk Inventor 5 to 11, 2009-2017
Inventor Details
Other Formats

IGES, STEP, JT, FBX

 Navisworks supports Inventor properties and these can be viewed in the 'Properties' window. To

open the Properties window, go to View tab > Workspace panel > Windows drop-down >
Properties.
 If you are using an Inventor Project file, (*.ipj) you will need to set this as the Active Project in
Navisworks, prior to opening your assembly drawings (*.iam). You can set the Active Project
either by opening your *.ipj file in Navisworks, or by going to Application Menu > Global
Options > File Readers > Inventor, then enter the full path and file name of your *.ipj file (e.g.
C:\my Inventor projects\project 1.ipj). Once loaded, you can then Open the corresponding
assemblies as usual.

Supported Applications | 15

Autodesk Navisworks 2017 Solutions

Exporter

Native
Format

Other
Format

Properties



Revit 2017
Revit Details
Other Formats

DWG, DWF, DWFx, DXF, DGN, FBX

 Navisworks can read Revit.rvt files
 Navisworks can export .nwc files directly from Revit software.

You will need to install Navisworks on the same machine as Revit.
 Revit properties are supported. These can be viewed in the 'Properties' window. To open the
Properties window, go to View tab > Workspace panel > Windows drop-down >
Properties.
 Autodesk Navisworks Simulate and Autodesk Navisworks Manage software support the export
of textures and materials from Revit.
 For supported entities refer to the Navisworks Help documentation.
Revit Architecture 2017
Revit Architecture Details
Other Formats

DWG, DWF, DWFx, DXF, DGN, FBX

 Navisworks can read Revit.rvt files
 Navisworks can export .nwc files directly from Revit Architecture software.

You will need to install Navisworks on the same machine as Revit Architecture.

 Revit properties are supported. These can be viewed in the 'Properties' window. To open the

Properties window, go to View tab > Workspace panel > Windows drop-down >
Properties.
 Autodesk Navisworks Simulate and Autodesk Navisworks Manage software support the export
of textures and materials from Revit Architecture.
 For supported entities refer to the Navisworks Help documentation.
Revit Structure 2017
Revit Structure Details
Other Formats



DWG, DWF, DWFx, DXF, DGN, CIS/2, FBX

Navisworks can read Revit.rvt files
Navisworks can export .nwc files directly from Revit Structure software.
You will need to install Navisworks on the same machine as Revit Structure.

Supported Applications | 16

Autodesk Navisworks 2017 Solutions


Revit properties are supported. These can be viewed in the 'Properties' window. To open the
Properties window, go to View tab > Workspace panel > Windows drop-down >
Properties.

Supported Applications | 17

Autodesk Navisworks 2017 Solutions

Exporter

Native
Format

Other
Format

Properties

Revit MEP 2010-2017
Revit MEP Details
Other Formats




DWG, DWF, DWFx, DXF, DGN, FBX

Navisworks can read Revit.rvt files
Navisworks can export .nwc files directly from Revit Systems/Revit MEP software.
You will need to install Navisworks on the same machine as Revit Systems/Revit MEP.
Revit properties are supported. These can be viewed in the 'Properties' window. To open the
Properties window, go to View tab > Workspace panel > Windows drop-down >
Properties.

Autodesk 3ds Max 2017
3ds Max Details
Other Formats

DWG, DXF, 3DS, IGES, FBX

 To view your 3ds Max model in Navisworks, you will need to have 3ds Max software installed on

the same machine and export to .nwc for use in Navisworks.

 Navisworks does not support .max files, so you cannot read the native file format directly into

Navisworks.
NOTE: Navisworks Simulate and Manage both support the export of textures and materials from 3ds
Max.
Autodesk Maya
Maya Details
Other Formats

DXF, IGES, VRML

 Navisworks has file readers for .dxf, .igs .iges and .wrl .wrz.

Supported Applications | 18

Autodesk Navisworks 2017 Solutions
Bentley
Exporter

Native
Format

Other
Format

Properties

AutoPLANT
AutoPlant Details
Other Formats


DWG, DXF, 3DS

In order to read an AutoPLANT DWG file into Navisworks, you will first need to install the
AutoPLANT Object Enabler.

NOTE: When using an object enabler, choose one of the same or later version as the authoring
application, and then ensure the corresponding (Navisworks) loader version (year) is selected in Tools >
Global Options > File Readers > DWG/DXF > DWG Loader Version.


You can also export to .nwc if you have Navisworks installed on the same machine as
AutoPLANT.

NOTE: To ensure geometry is rendered correctly when reading a DWG file into Navisworks, or exporting
from AutoPLANT, ensure the render type is set to Shaded in Tools > Global Options > File Readers >
DWG/DXF > Render Type.
MicroStation J
MicroStation J Details
Other Formats







DWG, DXF, DGN, IGES, STEP, VRML

Models can be exported as NWC files from MicroStation J if you have Navisworks installed on
the same machine.
Navisworks supports the native MicroStation .dgn file format, which can be read directly into
Navisworks.
Object properties, such as colors and ambient, diffuse and shininess properties of materials from
.pal and .mat palette and material files are supported.
Intergraph PDS object information can be read from .drv files and DMRS and database linkage
and association ID's are also supported. These can be viewed in the Properties window. To
open the Properties window, go to View tab > Workspace panel > Windows drop-down >
Properties.
Autodesk Navisworks Simulate and Autodesk Navisworks Manage support MicroStation
materials and textures.

NOTE: For optimum file fidelity we recommend the NWC (or NWD) Exporter from within MicroStation
whenever possible.
NOTE: For exporting numerous files from MicroStation we recommend using the Perl script installed
with Navisworks (by default in, C:\Program Files\Autodesk\Navisworks [Review/Simulate/Manage]
2017\Tools).

Supported Applications | 19

Autodesk Navisworks 2017 Solutions

Exporter

Native
Format

Other
Format

Properties

MicroStation v8 to 8.5, XM (8.9)
MicroStation Details
Other Formats





DWG, DXF, DGN, IGES, STEP, VRML

Models can be exported as NWC files from MicroStation V8 if you have Navisworks installed on
the same machine.
Navisworks supports the native MicroStation V8 dgn file format, which can be read directly into
Navisworks.
Object properties, such as colors and ambient, diffuse and shininess properties of materials from
.pal and .mat palette and material files are supported.
Autodesk Navisworks Simulate and Autodesk Navisworks Manage support MicroStation
materials and textures.

NOTE: For optimum file fidelity we recommend the NWC (or NWD) Exporter from within MicroStation
whenever possible.
NOTE: For exporting numerous files from MicroStation we recommend using the Perl script installed
with Navisworks (by default in, C:\Program Files\Autodesk\Navisworks [Review/Simulate/Manage]
2017\Tools).
ProSteel 3D (formerly from Kiwi Software GmbH)
ProSteel 3D Details
Other Formats




DWG, DXF, 3DS, CIS/2

This information relates to ProSteel 3D / ProStahl 3D / AutoPLANT Structural.
In order to read ProSteel files into Navisworks, you either need ProSteel 3D installed on the
same machine as Navisworks, or the relevant ProSteel 3D object enabler.
Only basic AutoCAD properties are supported (such as Entity Handle and Material) and these
can be viewed in the Properties window. This can be opened by going to View tab>
Workspace panel > Windows drop-down > Properties.

Supported Applications | 20

Autodesk Navisworks 2017 Solutions

Exporter

Native
Format

Other
Format

Properties

TriForma J
TriForma J Details
Other Formats







DWG, DXF, DGN, IGES, STEP, VRML

Models can be exported as NWC files from Triforma J if you have Navisworks installed on the
same machine.
Navisworks supports the native Triforma J .dgn file format, which can be read directly into
Navisworks.
Object properties, such as colors and ambient, diffuse and shininess properties of materials from
.pal and .mat palette and material files are supported.
Family and Part information from TriForma and PDS object information can be read from .drv
files and DMRS and database linkage and association ID's are also supported. These can be
viewed in the Properties window. To open the Properties window, go to View tab >
Workspace panel > Windows drop-down > Properties.
Autodesk Navisworks Simulate and Autodesk Navisworks Manage support TriForma materials
and textures.

NOTE: For optimum file fidelity we recommend the NWC (or NWD) Exporter from within TriForma
whenever possible.
NOTE: For exporting numerous files from TriForma we recommend using the Perl script installed with
Navisworks (by default in, C:\Program Files\Autodesk\Navisworks [Simulate/Manage] 2017\Tools).

Supported Applications | 21

Autodesk Navisworks 2017 Solutions

Exporter

Native
Format

Other
Format

Properties

TriForma v8 to 8.9
TriForma Details
Other Formats





DWG, DXF, DGN, IGES, STEP, VRML

Models can be exported as NWC files from TriForma V8 if you have Navisworks installed on the
same machine.
Navisworks supports the native TriForma V8 dgn file format, which can be read directly into
Navisworks.
Object properties, such as colors and ambient, diffuse and shininess properties of materials from
.pal and .mat palette and material files are supported.
Autodesk Navisworks Simulate and Autodesk Navisworks Manage support TriForma materials
and textures.

NOTE: For optimum file fidelity we recommend the NWC (or NWD) Exporter from within TriForma
whenever possible.
NOTE: For exporting numerous files from TriForma we recommend using the Perl script installed with
Navisworks (by default in, C:\Program Files\Autodesk\Navisworks [Simulate/Manage] 2017\Tools).

Supported Applications | 22

Autodesk Navisworks 2017 Solutions
Graphisoft
Exporter

Native
Format

Other
Format

Properties

ArchiCAD 16 to 19
ArchiCAD Details
Other Formats




DWG, DXF, DGN, IFC

ArchiCAD can export to Navisworks .nwc file format. Navisworks does NOT have a direct reader
for ArchiCAD files.
ArchiCAD can also save files as .dwg, .dxf, .dgn and .ifc formats. These can be read directly by
Navisworks.
Object properties, such as GUIDS and Library Part Parameters can optionally be exported with
the Navisworks file.

Constructor 2007 to 2010
Constructor Details
Other Formats



DWG, DXF, DGN

Constructor 2007 to 2010 can export to the Navisworks .nwc file format. Navisworks does NOT
have a direct reader for Constructor 2010 files.
Object properties, such as GUIDS and Library Part Parameters can optionally be exported with
the Navisworks file.

AceCad
StruCad
StruCad Details
Other Formats



DXF, CIS/2

StruCad files can be viewed in Navisworks, if they have been saved as .dxf or .stp format.
Object properties are not supported.

auto.des.sys
form.z
form.z Details
Other Formats


DWG, DXF, 3DS, IGES, STL, VRML

Navisworks supports all of the above file formats, which form.z can export to.

Supported Applications | 23

Autodesk Navisworks 2017 Solutions
Adobe Systems Inc.
Exporter

Native
Format

Other
Format

Properties

PDF
PDF Details
Other Formats




PDF

Navisworks supports Adobe Portable Document Format (PDF) files in the sheet browser, directly
from 2017.
Only 2D pdf is supported, this does include multiple sheet files.
For Navisworks 2015 users, the application may be found as a free download on the Autodesk
Navisworks Application Exchange.

AEC
CADPIPE
CADPIPE Details
Other Formats

DWG, DXF, 3DS



To view CADPIPE object properties in Navisworks, you may need to turn on the Convert Object
Properties option. To do this, go to Tools > Global Options > File Readers > DWG/DXF >
Advanced and select the CADPIPE option. Any CADPIPE properties can then be viewed in the
'Properties' window. To open the Properties window, go to View tab> Workspace panel >
Windows drop-down > Properties.



CADPIPE 'Industrial' and 'Commercial' cannot be used at the same time. If both are installed,
then industrial is used. You can disable either or both by going to Tools > Global Options >
Registry > Current User > CADPIPE. Change the version you require to one (1) and disable
the other version by changing that value to zero (0).

AVEVA
PDMS
PDMS Details
Other Formats

RVM



Navisworks can read .rvm files exported from PDMS.



AVEVA Review .rvs files are also supported. These require the same filename as the .rvm file.



PDMS attribute files are supported, output using either the 'Dump Attributes' or 'Data' formats.
These can be viewed in the 'Properties' window. To open the Properties window, go to View
tab > Workspace panel > Windows drop-down > Properties.

Supported Applications | 24

Autodesk Navisworks 2017 Solutions
CADopia
Exporter

Native
Format

Other
Format

Properties

IntelliCAD
IntelliCAD Details
Other Formats


DWG, DXF

Navisworks supports the native IntelliCAD .dwg file format, which can be read directly into
Navisworks.

CEA Technology
Exporter

Native
Format

Other
Format

Properties

Plant-4D
Plant-4D Details
Other Formats


DWG, DGN

Navisworks has file readers for .dwg and .dgn files, both of which are supported by Plant-4D.

COADE, Inc.
Exporter

Native
Format

Other
Format

Properties

CADWorx Plant
CADWorx Plant Details
Other Formats






DWG, DXF, 3DS

Models can be exported from CADWorx as either .nwc or .nwd format, if you have Navisworks
installed on the same machine.
Navisworks also provides support for .dwg files enabling native CADWorx models to be read
directly into Navisworks.
CADWorx object properties are also supported by Navisworks and these can be viewed in the
'Properties' window. To open the Properties window, go to View tab > Workspace panel >
Windows drop-down > Properties.
CADWorx piping, steel, and equipment data is fully supported by Navisworks.

Supported Applications | 25

Autodesk Navisworks 2017 Solutions

Exporter

Native
Format

Other
Format

Properties

CADWorx Pipe
CADWorx Pipe Details
Other Formats






DWG, DXF, 3DS

Models can be exported from CADWorx as either .nwc or .nwd format, if you have Navisworks
installed on the same machine.
Navisworks also provides support for .dwg files enabling native CADWorx models to be read
directly into Navisworks.
CADWorx object properties are also supported by Navisworks and these can be viewed in the
'Properties' window. To open the Properties window, go to View tab > Workspace panel >
Windows drop-down > Properties.
The legacy product, CADWorx Pipe, is fully supported by Navisworks.

CADWorx Steel
CADWorx Steel Details
Other Formats






DWG, DXF, 3DS

Models can be exported from CADWorx as either .nwc or .nwd format, if you have Navisworks
installed on the same machine.
Navisworks also provides support for .dwg files enabling native CADWorx models to be read
directly into Navisworks.
CADWorx object properties are also supported by Navisworks and these can be viewed in the
'Properties' window. To open the Properties window, go to View tab > Workspace panel >
Windows drop-down > Properties.
CADWorx Steel is fully supported by Navisworks.

Supported Applications | 26

Autodesk Navisworks 2017 Solutions
COINS
Exporter

Native
Format

Other
Format

Properties

BSLink
BSLink Details
Other Formats




DWG, DXF, 3DS

In order to read a BSLink file into Navisworks, you either need BSLink installed on the same
machine as Navisworks, or AutoCAD installed complete with the BSLink object enabler.
If BSLink is installed, the object enabler is not necessary. With Navisworks installed on the same
machine, simply export to .nwc or .nwd.
In Navisworks, object properties can be viewed in the 'BSLink' tab in the 'Properties' window.
To open the properties window, go to View tab > Workspace panel > Windows dropdown > Properties.

Framing
Framing Details
Other Formats




DWG, DXF, 3DS

In order to read a Framing file into Navisworks, you either need COINS Framing installed on the
same machine as Navisworks, or ADT installed complete with the Framing object enabler.
If COINS Framing is installed, the object enabler is not necessary. If Navisworks is installed on
the same machine, simply export to .nwc or .nwd.
In Navisworks, object properties can be viewed in the Framing tab in the Properties window. To
open the properties window, go to View tab > Workspace panel > Windows drop-down >
Properties.

CSC
3D+
3D+ Details
Other Formats




DWG, CIS/2

3D+ has a Navisworks Exporter, enabling you to export a Navisworks file out of 3D+.
Also see the 3D+ website for information on their 3D+ Navisworks Reader. This is a plug-in to
Navisworks, enabling you to read the native .3nwc file format in Navisworks.
3D+ object properties are supported by Navisworks via either of the above routes.

Supported Applications | 27

Autodesk Navisworks 2017 Solutions
Dassault Systemes
Exporter

Native
Format

Other
Format

Properties

CATIA
CATIA Details
Other Formats



DXF, IGES, STEP, JT

Navisworks has file readers for .dxf, .igs, .stp and .jt files, all of which can be exported from
CATIA.
STEP is the preferred exchange format.

Google
SketchUp (up to 2016)
SketchUp Details
Other Formats



DWG, 3DS

SketchUp .skp files (v5 up to 2016 can be read directly into Navisworks.
Grouping objects in SketchUp will make it easier to use the model in Navisworks, for example
applying materials, or attaching objects to TimeLiner tasks.

Hannappel SOFTWARE GmbH
elcoCAD R4
elcoCAD R4 Details
Other Formats




DWG, DXF, 3DS

Models can be exported from elcoCAD as either .nwc or .nwd format.
Navisworks also supports the native elcoCAD .dwg file format, which can be read directly into
Navisworks.
Object properties are also supported by Navisworks and these can be viewed in the 'Properties'
window. To open the Properties window, go to View tab > Workspace panel > Windows
drop-down > Properties.

Supported Applications | 28

Autodesk Navisworks 2017 Solutions
Intergraph
Exporter

Native
Format

Other
Format

Properties

PDS
PDS Details
Other Formats






DWG, DXF, DGN, IGES, STEP

Intergraph PDS will save the model geometry in a .dgn file and the property information in a
.drv file. Both files are required by Navisworks to read the model with object properties.
In Navisworks, go to Tools > Global Options > DGN, scroll down and check the 'Convert PDS
Data' option. Ensure the .dgn and .drv files reside in the same directory. Navisworks will then
import the model, along with its properties.
PDS object properties can be viewed in the 'Properties' window. To open the Properties
window, go to View tab > Workspace panel > Windows drop-down > Properties.
If Navisworks has been installed onto the same machine as Intergraph PDS, you will be able to
export from PDS as a Navisworks .nwc or .nwd file.

Informatix
MicroGDS
MicroGDS Details
Other Formats



MAN

Navisworks supports the native MicroGDS .man file format, which can be read directly into
Navisworks.
Colors and Materials from the file are supported. The .man File Reader options can be found in
Tools > Global Options > File Readers > MAN.

Supported Applications | 29

Autodesk Navisworks 2017 Solutions
ITandFactory
Exporter

Native
Format

Other
Format

Properties

CADISON
CADISON Details
Other Formats








DXF, 3DS

Navisworks can directly read CADISON .dwg files, utilizing the .dwg file reader.
In order to read a CADISON file into Navisworks, you either need CADISON installed on the
same machine as Navisworks, or you will need to install the CADISON Object Enabler.
If CADISON is installed, the object enabler is not necessary.

With either CADISON or the Object Enabler installed, simply open the CADISON .dwg file in
Navisworks.
If CADISON is installed on the same machine as Navisworks, then you can also export to .nwc
or .nwd.
Exporting a Navisworks file from CADISON also retains the models object properties that can be
viewed in the 'Properties' window. To open the Properties window, go to View tab >
Workspace panel > Windows drop-down > Properties.

TRICAD MS
TRICAD Details
Other Formats



VRML

If TriCAD MS is installed on the same machine as Navisworks, then you can also export to .nwc
or .nwd.
Exporting a Navisworks file from TRICAD MS also retains the models object properties that can
be viewed in the 'Properties' window. To open the Properties window, go to View tab >
Workspace panel > Windows drop-down > Properties.

Supported Applications | 30

Autodesk Navisworks 2017 Solutions
Kubotek USA
Exporter

Native
Format

Other
Format

Properties

CADKEY
CADKEY Details
Other Formats


DWG, DXF, IGES, STEP

Navisworks has file readers for .dwg files and also .dxf, .igs and .stp files, all of which are
supported by CADKEY.

M.A.P.
CAD-Duct
CAD-Duct Details
Other Formats





DWG, DXF, 3DS

In order to read a CAD-Duct file into Navisworks, you either need CAD-Duct installed on the
same machine as Navisworks, or have the CAD-Duct Object Enabler installed. The CAD-Duct
Object Enabler can be downloaded from the CAD-Duct website, found under Support >
Additional Files.
If CAD-Duct is installed, the Object Enabler is not necessary. Simply export to .nwd or .nwc.
In Navisworks, object properties can be viewed in the 'CAD-Duct' tab in the 'Properties'
window. To open the Properties window, go to View tab > Workspace panel > Windows
drop-down > Properties.

Supported Applications | 31

Autodesk Navisworks 2017 Solutions
McNeel North America
Exporter

Native
Format

Other
Format

Properties

Rhino
Rhino Details
Other Formats


DWG, DXF, 3DS, IGES, STEP

In Navisworks, you can now read native Rhino files directly.

Mensch und Maschine
RoCAD
RoCAD Details
Other Formats





DWG, DXF, 3DS

Models can be exported from RoCAD as either .nwc or .nwd.
Navisworks also supports the .dwg file format, which can be read directly into Navisworks.
If you do not have RoCAD installed on the same machine as Navisworks, you will need to have
AutoCAD installed, along with the RoCAD Object Enabler.
Object properties, (such as Material Colors and Entity Handles) are also supported by
Navisworks and these can be viewed in the 'Properties' window. To open the Properties
window, go to View tab > Workspace panel > Windows drop-down > Properties.

MultiSUITE
MultiSTEEL
MultiSTEEL Details
Other Formats




DWG, DXF, 3DS

.dwg files from MultiSTEEL can be read directly into Navisworks utilizing the .dwg file reader.
Models can also be exported from MultiSTEEL as either .nwc or .nwd.
MultiSTEEL object properties can be viewed in the 'Properties' window. To open the Properties
window, go to View tab > Workspace panel > Windows drop-down > Properties.

Supported Applications | 32

Autodesk Navisworks 2017 Solutions
Nemetschek
Exporter

Native
Format

Other
Format

Properties

Allplan
Allplan Details
Other Formats



DWG, DXF, DGN, IFC

Allplan files can be viewed in Navisworks if they have been saved in one of the above formats.
Object properties are not supported.

PROCAD
3DSMART
3DSMART Details
Other Formats



DWG, DXF, 3DS

With 3DSMART installed on the same machine as Navisworks, you can read your DWG file
directly into Navisworks, utilizing the DWG file reader.
You can also export a .nwc file directly from 3DSMART.

PTC
Pro/ENGINEER
Pro/ENGINEER Details
Other Formats



IGES, STEP, VRML, JT

Native Pro/ENGINEER format support; .PRT .ASM .G .NEU
Pro/ENGINEER models can be exported to any of the above file formats which can then be read
into Navisworks.

CADDS 5
CADDS 5 Details
Other Formats


IGES, STEP

You can read CADDS 5 3D models into Navisworks, by exporting either an IGES or STEP file
from CADDS 5 and then utilize either the Navisworks .igs, or .stp file readers.

Supported Applications | 33

Autodesk Navisworks 2017 Solutions
QuickPen
Exporter

Native
Format

Other
Format

Properties

PipeDesigner 3D
PipeDesigner 3D Details
Other Formats




DWG, DXF, 3DS

Models can be exported from PipeDesigner 3D as either .nwc or .nwd format.
Navisworks also supports the native .dwg file format, which can be read directly into
Navisworks if the relevant Object Enabler is installed.
Object properties, (such as Material Colors and Entity Handles) are also supported by
Navisworks and these can be viewed in the 'Properties' window. To open the Properties
window, go to View tab > Workspace panel > Windows drop-down > Properties.

DuctDesigner 3D
DuctDesigner 3D Details
Other Formats




DWG, DXF, 3DS

Models can be exported from DuctDesigner 3D as either .nwc or .nwd format.
Navisworks also supports the native .dwg file format, which can be read directly into
Navisworks if the relevant Object Enabler is installed.
Object properties, (such as Material Colors and Entity Handles) are also supported by
Navisworks and these can be viewed in the 'Properties' window. To open the Properties
window, go to View tab > Workspace panel > Windows drop-down > Properties.

RAM International
CADstudio
CADstudio Details
Other Formats




DWG, DXF, 3DS

Models can be exported from CADstudio as either .nwc or .nwd format.
Navisworks also supports the native CADstudio .dwg file format, which can be read directly into
Navisworks.
Object properties are also supported by Navisworks and these can be viewed in the 'Properties'
window. To open the Properties window, go to View tab > Workspace panel > Windows
drop-down > Properties.

Supported Applications | 34

Autodesk Navisworks 2017 Solutions
SolidWorks
Exporter

Native
Format

Other
Format

Properties

SolidWorks
SolidWorks Details
Other Formats



DWG, DXF, IGES, STEP, VRML, JT

Native SolidWorks format support; .PRT .SLDPRT .ASM .SLDASM
SolidWorks models can be exported to DWG, DXF, IGES, STEP, VRML or JT format which can
then be read into Navisworks.

Tekla
Tekla Structures
Tekla Structures Details
Other Formats





DGN, VRML, CIS/2

Tekla Structures can export to the .dgn file format, which can be read directly into Navisworks.
Tekla Structures can additionally output to CIS/2. This may then be converted to VRML using
the translator from the National Institute of Standards and Technology (see the NIST website for
more information). The VRML file can then be read directly into Navisworks.
Limited object properties are supported via the .dgn route.

Xsteel
Xsteel Details
Other Formats



DGN

Xsteel can export to the .dgn file format, which can be read directly into Navisworks.
Limited object properties are supported via the .dgn route.

think3
thinkdesign
thinkdesign Details
Other Formats


DWG, DXF, IGES, STEP

Navisworks has file readers for .dwg/.dxf files and also .igs and .stp files.

Supported Applications | 35

Autodesk Navisworks 2017 Solutions
UGS
Exporter

Native
Format

Other
Format

Properties

I-deas
I-deas Details
Other Formats


DXF, IGES, STEP, JT

Navisworks has file readers for .dxf, .igs .stp and .jt files.

Solid Edge
Solid Edge Details
Other Formats


IGES, STEP, JT

Solid Edge can export to IGES STEP and JT files, which can be read directly into Navisworks.

NX (Unigraphics)
NX Details
Other Formats



DXF, IGES, STEP, JT

Native NX format support; .PRT.
Navisworks has file readers for .dxf, .igs .stp and .jt files.

FactoryCAD
FactoryCAD Details
Other Formats



DWG, DXF, 3DS

In order to read a FactoryCAD file into Navisworks, you either need FactoryCAD or the
FactoryCAD object enabler installed on the same machine.
If FactoryCAD is installed, the object enabler is not necessary. Simply export to .nwc or .nwd.

Supported Applications | 36

Autodesk Navisworks 2017 Solutions
UHP Process Piping
Exporter

Native
Format

Other
Format

Properties

FabPro Pipe
FabPro-Pipe Details
Other Formats



DWG, DXF, 3DS

Models can be exported from FabPro Pipe as either .nwc or .nwd format.
Navisworks also supports the native FabPro Pipe .dwg file format, which can be read directly
into Navisworks.

x-plant
x-plant
x-plant Details
Other Formats



DWG, DXF, 3DS

Models can be exported from x-plant as .nwc format.
Navisworks also supports the native x-plant .dwg file format, which can be read directly into
Navisworks.

Supported Applications | 37



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 37
Language                        : en-GB
Title                           : Autodesk Navisworks 2017 - Supported formats and applications
Author                          : Paul Walker;james.austin@autodesk.com
Subject                         : Supported Applications
Creator                         : Microsoft® Word 2013
Create Date                     : 2016:07:12 13:54:25+01:00
Modify Date                     : 2016:07:12 13:54:25+01:00
Producer                        : Microsoft® Word 2013
EXIF Metadata provided by EXIF.tools

Navigation menu