Nikon Cool Pix S4000 Manual User Guide And Review
User Manual: Nikon-CoolPix-S4000-Manual-User-Guide-and-Review
Open the PDF directly: View PDF .
Page Count: 196
Download | |
Open PDF In Browser | View PDF |
DIGITAL CAMERA User’s Manual No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION. Printed in xxxxx En YP9L01(11) 6MM77711-01 En Trademark Information • Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • Macintosh, Mac OS, and QuickTime are trademarks of Apple Inc. • Adobe and Acrobat are registered trademarks of Adobe Systems Inc. • SD and SDHC Logos are trademarks of SD-3C, LLC. • PictBridge is a trademark. • All other trade names mentioned in this manual or the other documentation provided with your Nikon product are trademarks or registered trademarks of their respective holders. Introduction First Steps Basic Photography and Playback: A (Auto) Mode More on Shooting More on Playback Editing Pictures Movie Recording and Playback Connecting to Televisions, Computers and Printers Basic Camera Setup Caring for the Camera Technical Notes and Index i For Your Safety To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where all those who use the product will read them. This icon marks warnings, information that should be read before using this Nikon product, to prevent possible injury. WARNINGS Turn off in the event of malfunction Should you notice smoke or an unusual smell coming from the camera or AC adapter, unplug the AC adapter and remove the battery immediately, taking care to avoid burns. Continued operation could result in injury. After removing or disconnecting the power source, take the equipment to a Nikon-authorized service representative for inspection. Do not disassemble Touching the internal parts of the camera or AC adapter could result in injury. Repairs should be performed only by qualified technicians. Should the camera or AC adapter break open as the result of a fall or other accident, take the product to a Nikon-authorized service representative for inspection, after unplugging the product and/or removing the battery. ii Do not use the camera or AC adapter in the presence of flammable gas Do not use electronic equipment in the presence of flammable gas, as this could result in explosion or fire. Handle the camera strap with care Never place the strap around the neck of an infant or child. Keep out of reach of children Particular care should be taken to prevent infants from putting the battery or other small parts into their mouths. For Your Safety Observe caution when handling the battery The battery may leak or explode if improperly handled. Observe the following precautions when handling the battery for use in this product: • Before replacing the battery, turn the product off. If you are using the Charging AC Adapter/AC adapter, be sure it is unplugged. • Use only a Rechargeable Li-ion Battery EN-EL10 (supplied). Charge the battery inserting it into the camera and connecting the Charging AC Adapter EH-68P/EH68P (AR) (supplied). • When inserting the battery, do not attempt to insert it upside down or backwards. • Do not short or disassemble the battery or attempt to remove or break the battery insulation or casing. • Do not expose the battery to flame or to excessive heat. • Do not immerse in or expose to water. • Return the battery to the battery case for transportation. Do not transport or store with metal objects such as necklaces or hairpins. • The battery is prone to leakage when fully discharged. To avoid damage to the product, be sure to remove the battery when no charge remains. • Discontinue use immediately should you notice any change in the battery, such as discoloration or deformation. • If liquid from the damaged battery comes in contact with clothing or skin, rinse immediately with plenty of water. • • • • • • Observe the following precautions when handling the Charging AC Adapter Keep dry. Failure to observe this precaution could result in fire or electric shock. Dust on or near the metal parts of the plug should be removed with a dry cloth. Continued use could result in fire. Do not handle the cable or go near the Charging AC Adapter during lightning storms. Failure to observe this precaution could result in electric shock. Do not damage, modify, forcibly tug or bend the power cable, place it under heavy objects, or expose it to heat or flames. Should the insulation be damaged and the wires become exposed, take it to a Nikonauthorized service representative for inspection. Failure to observe these precautions could result in fire or electric shock. Do not handle the plug or Charging AC Adapter with wet hands. Failure to observe this precaution could result in electric shock. Do not use with travel converters or adapters designed to convert from one voltage to another or with DCto-AC inverters. Failure to observe this precaution could damage the product or cause overheating or fire. iii For Your Safety Use appropriate cables When connecting cables to the input and output jacks, use only the cables provided or sold by Nikon for the purpose, to maintain compliance with product regulations. Handle moving parts with care Be careful that your fingers or other objects are not pinched by the lens cover or other moving parts. CD-ROMs The CD-ROMs supplied with this device should not be played back on audio CD equipment. Playing CDROMs on an audio CD player could cause hearing loss or damage the equipment. Observe caution when using the flash Using the flash close to your subject’s eyes could cause temporary visual impairment. Particular care should be observed if photographing infants, when the flash should be no less than one meter (3 ft. 4 in.) from the subject. Do not operate the flash with the flash window touching a person or object Failure to observe this precaution could result in burns or fire. iv Avoid contact with liquid crystal Should the monitor break, care should be taken to avoid injury caused by broken glass and to prevent liquid crystal from the monitor touching the skin or entering the eyes or mouth. Turn the power off when using inside an airplane or the hospital Turn the power off while inside the airplane during take off or landing. Follow the instructions of the hospital when using while in a hospital. The electromagnetic waves given out by this camera may disrupt the electronic systems of the airplane or the instruments of the hospital. Notices Notice for Customers in the U.S.A. Federal Communications Commission (FCC) Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/television technician for help. CAUTIONS Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Nikon Corporation may void the user’s authority to operate the equipment. Interface Cables Use the interface cables sold or provided by Nikon for your equipment. Using other interface cables may exceed the limits of Class B Part 15 of the FCC rules. Notice for customers in the State of California WARNING Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. Nikon Inc., 1300 Walt Whitman Road Melville, New York 11747-3064 USA Tel: 631-547-4200 v Notices Notice for customers in Canada CAUTION This Class B digital apparatus complies with Canadian ICES-003. ATTENTION Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Notice for customers in Europe This symbol indicates that this product is to be collected separately. The following apply only to users in European countries: • This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste. • For more information, contact the retailer or the local authorities in charge of waste management. This symbol on the battery indicates that the battery is to be collected separately. The following apply only to users in European countries: • All batteries, whether marked with this symbol or not, are designated for separate collection at an appropriate collection point. Do not dispose of as household waste. • For more information, contact the retailer or the local authorities in charge of waste management. vi Table of Contents For Your Safety ......................................................................................................................................ii WARNINGS.................................................................................................................................................................. ii Notices ....................................................................................................................................................... v Introduction ...........................................................................................................................................1 About This Manual ................................................................................................................................ 1 Information and Precautions............................................................................................................. 2 Parts of the Camera............................................................................................................................... 4 The Camera Body ...................................................................................................................................................4 Basic Operations..................................................................................................................................... 6 The A (Shooting Mode) Button...................................................................................................................6 The c (Playback) Button..................................................................................................................................6 Shutter-release Button ........................................................................................................................................7 Attaching the Camera Strap ............................................................................................................................7 Operating the Touch Panel ................................................................................................................ 8 Tapping.........................................................................................................................................................................8 Dragging ......................................................................................................................................................................8 Using the Stylus .......................................................................................................................................................9 Main Display of the Monitor/Touch Panel and Basic Operations.......................................10 Shooting (Operation Controls)....................................................................................................................10 Shooting (Other Indicators)...........................................................................................................................11 Playback (Operation Controls).....................................................................................................................12 Playback (Information Display)....................................................................................................................13 The Menu Screen.................................................................................................................................................14 Help Display ............................................................................................................................................................15 First Steps ............................................................................................................................................. 16 Inserting the Battery ...........................................................................................................................16 Removing the Battery .......................................................................................................................................17 Charging the Battery ..........................................................................................................................18 Turning On and Off the Camera.................................................................................................................21 Setting Display Language, Date and Time .................................................................................22 Inserting Memory Cards ....................................................................................................................24 Removing Memory Cards...............................................................................................................................24 Basic Photography and Playback: A (Auto) Mode............................................................... 26 Step 1 Turn the Camera On and Select A (Auto) Mode .......................................................26 Indicators Displayed in A (Auto) Mode...............................................................................................27 Step 2 Frame a Picture .......................................................................................................................28 Using the Zoom....................................................................................................................................................29 Step 3 Focus and Shoot .....................................................................................................................30 Step 4 Playing Back and Deleting Pictures .................................................................................32 vii Table of Contents Playing Back Pictures (Playback Mode)..................................................................................................32 Deleting Pictures..................................................................................................................................................33 Tapping the Monitor to Release the Shutter (Touch Shutter) .............................................34 Tapping the Monitor to Focus (Touch AF/AE)...........................................................................37 Focusing on a Moving Subject (Subject Tracking)...................................................................40 Using the Flash......................................................................................................................................42 Setting the Flash Mode....................................................................................................................................42 Taking Pictures with the Self-timer ...............................................................................................44 Macro Mode...........................................................................................................................................45 More on Shooting ............................................................................................................................. 46 Selecting a Shooting Mode ..............................................................................................................46 Shooting Options: Shooting Menu (A (Auto) Mode)............................................................47 Image Mode (Image Quality/Image Size).............................................................................................48 White Balance (Adjusting Hue) ...................................................................................................................50 Exposure Comp. (Adjusting Brightness)................................................................................................52 Continuous..............................................................................................................................................................53 ISO Sensitivity.........................................................................................................................................................54 AF Area Mode ........................................................................................................................................................55 Autofocus Mode .................................................................................................................................................57 Camera Settings that Cannot Be Applied Simultaneously ........................................................58 Shooting Suited to Scenes (Scene Mode) ...................................................................................59 Setting a Scene Mode.......................................................................................................................................59 Shooting in the Scene Mode Selected by the Camera (Scene Auto Selector)........................................................................................................................................60 Selecting a Scene Mode to Take Pictures (Features).....................................................................62 Using the Draw Option....................................................................................................................................69 Shooting for a Panorama................................................................................................................................70 Shooting Smiling Faces (Smart Portrait Mode).........................................................................72 Smart Portrait Menu...........................................................................................................................................74 More on Playback.............................................................................................................................. 75 viii Operations in Full-frame Playback Mode....................................................................................75 Viewing Multiple Pictures: Thumbnail Playback ......................................................................77 Taking a Closer Look: Playback Zoom ..........................................................................................79 Selecting Playback Mode ..................................................................................................................80 Sorting Favorite Pictures (Favorite Pictures Mode) .................................................................81 Adding Pictures to Albums ...........................................................................................................................81 Viewing Pictures in an Album......................................................................................................................83 Removing Pictures from Albums...............................................................................................................84 Using Favorite Pictures Mode......................................................................................................................85 Favorite Pictures Menu ....................................................................................................................................85 Changing Icons Assigned to Albums......................................................................................................86 Image Searching in Auto Sort Mode.............................................................................................88 Table of Contents Viewing Pictures in Auto Sort Mode........................................................................................................88 Using Auto Sort Mode......................................................................................................................................90 Auto Sort Menu ....................................................................................................................................................90 Viewing Pictures by Date (List by Date Mode) ..........................................................................91 Selecting a Date in List by Date Mode ...................................................................................................91 Using List by Date Mode.................................................................................................................................92 List by Date Menu ...............................................................................................................................................92 Playback Options: The Playback Menu ........................................................................................93 Print Set (Creating a DPOF Print Order) .................................................................................................94 Slide Show................................................................................................................................................................97 Delete (Deleting Multiple Pictures) ..........................................................................................................98 Protect ..................................................................................................................................................................... 100 Copy (Copy Between Internal Memory and Memory Card) ................................................. 100 Rotate Image ...................................................................................................................................... 102 Voice Memos: Recording and Playback .................................................................................... 103 Recording Voice Memos.............................................................................................................................. 103 Playing Voice Memos..................................................................................................................................... 104 Deleting Voice Memos.................................................................................................................................. 104 Editing Pictures ................................................................................................................................105 Editing Functions .............................................................................................................................. 105 Picture Editing.................................................................................................................................... 107 U Paint: Painting Pictures........................................................................................................................... 107 k Quick Retouch: Enhancing Contrast and Saturation.......................................................... 110 I D-Lighting: Enhancing Brightness and Contrast ................................................................... 111 e Skin Softening: Softening Skin Tones ........................................................................................... 112 P Stretch: Stretching Pictures................................................................................................................. 114 O Perspective Control: Adjusting a Sense of Perspective ..................................................... 115 g Small Picture: Resizing Pictures........................................................................................................ 116 F Color Options: Modifying Color Tones......................................................................................... 117 o Crop: Creating a Cropped Copy........................................................................................................ 118 Movie Recording and Playback..................................................................................................119 Recording Movies ............................................................................................................................. 119 Movie Menu......................................................................................................................................................... 121 Movie Options .................................................................................................................................................... 121 Autofocus Mode................................................................................................................................................ 122 Electronic VR ....................................................................................................................................................... 122 Movie Playback .................................................................................................................................. 123 Deleting Movie................................................................................................................................................... 123 Connecting to Televisions, Computers and Printers ..........................................................124 Connecting to a TV........................................................................................................................... 124 ix Table of Contents Connecting to a Computer............................................................................................................ 126 Before Connecting the Camera............................................................................................................... 126 Transferring Pictures from a Camera to a Computer ................................................................. 127 Charging While Connecting to a Computer ................................................................................... 131 Connecting to a Printer................................................................................................................... 132 Connecting the Camera to a Printer..................................................................................................... 133 Printing Pictures One at a Time ............................................................................................................... 134 Printing Multiple Pictures ............................................................................................................................ 135 Basic Camera Setup ........................................................................................................................138 Setup Menu......................................................................................................................................... 138 Welcome Screen ............................................................................................................................................... 140 Date........................................................................................................................................................................... 141 Monitor Settings................................................................................................................................................ 144 Date Imprint (Imprinting Date and Time) ........................................................................................ 144 Electronic VR ....................................................................................................................................................... 145 Motion Detection ............................................................................................................................................ 146 AF Assist ................................................................................................................................................................. 147 Digital Zoom........................................................................................................................................................ 148 Sound Settings .................................................................................................................................................. 148 Auto Off .................................................................................................................................................................. 149 Format Memory/Format Card.................................................................................................................. 150 Language............................................................................................................................................................... 151 Video Mode ......................................................................................................................................................... 151 Charge by Computer...................................................................................................................................... 152 Blink Warning ..................................................................................................................................................... 152 Reset All .................................................................................................................................................................. 154 Firmware Version ............................................................................................................................................. 156 Caring for the Camera....................................................................................................................157 Maximizing Camera Life and Performance.............................................................................. 157 Cleaning ................................................................................................................................................................. 159 Storage .................................................................................................................................................................... 159 Technical Notes and Index...........................................................................................................160 Optional Accessories ....................................................................................................................... 160 Approved Memory Cards ............................................................................................................................ 161 Image/Sound File and Folder Names ........................................................................................ 162 Error Messages................................................................................................................................... 163 Troubleshooting................................................................................................................................ 167 Specifications ..................................................................................................................................... 174 Supported Standards ..................................................................................................................................... 177 Index ...................................................................................................................................................... 178 x Introduction About This Manual Introduction Thank you for your purchase of a Nikon COOLPIX S4000 digital camera. This manual was written to help you enjoy taking pictures with your Nikon digital camera. Read this manual thoroughly before use, and keep it where all those who use the product will read it. Symbols and Conventions To make it easier to find the information you need, the following symbols and conventions are used: B This icon marks cautions, information that should be read before use, to prevent damage to the camera. D This icon marks tips, additional information that may be helpful when using the camera. C This icon marks notes, information that should be read before using the camera. A This icon indicates that more information is available elsewhere in this manual. Notations • A Secure Digital (SD) memory card is referred to as a “memory card.” • The setting at the time of purchase is referred to as the “default setting.” • The names of menu items displayed in the camera monitor, and the names of buttons or messages displayed on a computer monitor appear in bold. Screen Samples In this manual, images are sometimes omitted from monitor display samples so that monitor indicators can be more clearly shown. Illustrations and Screen Display Illustrations and text displays shown in this manual may differ from actual display. C Internal Memory and Memory Cards Pictures taken with this camera can be stored in the camera’s internal memory or on removable memory cards. If a memory card is inserted, all new pictures will be stored on the memory card and delete, playback and format operations will apply only to the pictures on the memory card. The memory card must be removed before the internal memory can be formatted or accessed for picture storage, deletion, or viewing. 1 Information and Precautions Life-Long Learning Introduction As part of Nikon’s “Life-Long Learning” commitment to ongoing product support and education, continually updated information is available online at the following sites: • For users in the U.S.A.: http://www.nikonusa.com/ • For users in Europe and Africa: http://www.europe-nikon.com/support/ • For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.com/ Visit these sites to keep up-to-date with the latest product information, tips, answers to frequently asked questions (FAQs), and general advice on digital imaging and photography. Additional information may be available from the Nikon representative in your area. Visit the site below for contact information: http://imaging.nikon.com/ Use Only Nikon Brand Electronic Accessories Nikon COOLPIX cameras are designed to the highest standards and include complex electronic circuitry. Only Nikon brand electronic accessories (including battery chargers, batteries, Charging AC Adapter and AC adapters) certified by Nikon specifically for use with this Nikon digital camera are engineered and proven to operate within the operational and safety requirements of this electronic circuitry. THE USE OF NON-NIKON ELECTRONIC ACCESSORIES COULD DAMAGE THE CAMERA AND MAY VOID YOUR NIKON WARRANTY. The use of third-party rechargeable Li-ion batteries not bearing the Nikon holographic seal could interfere with normal operation of the camera or result in the batteries overheating, igniting, rupturing, or Holographic seal: leaking. Identifies this device as an For more information about Nikon brand accessories, contact a local authentic Nikon product. authorized Nikon dealer. Before Taking Important Pictures Before taking pictures on important occasions (such as at weddings or before taking the camera on a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable for damages or lost profits that may result from product malfunction. About the Manuals • No part of the manuals included with this product may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without Nikon’s prior written permission. • Nikon reserves the right to change the specifications of the hardware and software described in these manuals at any time and without prior notice. • Nikon will not be held liable for any damages resulting from the use of this product. • While every effort was made to ensure that the information in these manuals is accurate and complete, we would appreciate it were you to bring any errors or omissions to the attention of the Nikon representative in your area (address provided separately). 2 Information and Precautions Notice Concerning Prohibition of Copying or Reproduction Introduction Note that simply being in possession of material that was digitally copied or reproduced by means of a scanner, digital camera or other device may be punishable by law. • Items prohibited by law from being copied or reproduced Do not copy or reproduce paper money, coins, securities, government bonds or local government bonds, even if such copies or reproductions are stamped “Sample.” The copying or reproduction of paper money, coins, or securities which are circulated in a foreign country is prohibited. Unless the prior permission of the government was obtained, the copying or reproduction of unused postage stamps or post cards issued by the government is prohibited. The copying or reproduction of stamps issued by the government and of certified documents stipulated by law is prohibited. • Cautions on certain copies and reproductions The government has issued cautions on copies or reproductions of securities issued by private companies (shares, bills, checks, gift certificates, etc.), commuter passes or coupon tickets, except when a minimum of necessary copies are to be provided for business use by a company. Also, do not copy or reproduce passports issued by the government, licenses issued by public agencies and private groups, ID cards and tickets, such as passes and meal coupons. • Comply with copyright notices The copying or reproduction of copyrighted creative works such as books, music, paintings, woodcut prints, maps, drawings, movies and photographs is governed by national and international copyright laws. Do not use this product for the purpose of making illegal copies or to infringe copyright laws. Disposing of Data Storage Devices Please note that deleting images or formatting data storage devices such as memory cards or builtin camera memory does not completely erase the original image data. Deleted files can sometimes be recovered from discarded storage devices using commercially available software, potentially resulting in the malicious use of personal image data. Ensuring the privacy of such data is the user’s responsibility. Before discarding a data storage device or transferring ownership to another person, erase all data using commercial deletion software, or format the device and then completely refill it with images containing no private information (for example, pictures of empty sky). Be sure to also replace any pictures selected for the welcome screen (A 140). Care should be taken to avoid injury or damage to property when physically destroying data storage devices. 3 Parts of the Camera The Camera Body 1 2 3 4 6 5 Introduction 9 Lens cover closed 8 4 7 5 Lens .........................................................159, 174 1 Zoom control..................................................29 f: wide .........................................................29 g: tele ..............................................................29 h: thumbnail playback......................77 i: playback zoom ....................................79 6 Self-timer lamp...............................................44 AF-assist illuminator.................................147 7 Built-in microphone...................... 103, 119 2 Shutter-release button..............................30 8 Lens cover ......................................................157 3 Built-in flash......................................................42 9 Eyelet for camera strap................................ 7 4 Power switch/power-on lamp .......................................................................26, 149 Parts of the Camera Introduction 1 2 3 4 Opening the connector cover 12 11 10 8 9 7 6 5 1 Charge lamp......................................... 19, 131 Flash lamp......................................................... 43 7 Battery chamber............................................16 2 A (shooting mode) button.............6, 46 8 Battery-chamber/ memory card slot cover ...................16, 24 3 c (playback) button ................... 6, 32, 80 9 Speaker ................................................. 104, 123 4 Monitor/touch panel ................................. 10 10 Tripod socket 5 Battery latch............................................. 16, 17 6 Memory card slot ......................................... 24 11 USB/audio/video output connector ..........................................................124, 127, 133 12 Connector cover ...................124, 127, 133 5 Basic Operations The A (Shooting Mode) Button Introduction • Press the A button in playback mode to enter shooting mode. • Press the A button in shooting mode to display the shooting-mode selection menu and switch shooting modes (A 46). The c (Playback) Button • Press the c button in shooting mode to enter playback mode. • Press the c button in playback mode to display the playback-mode selection menu and switch playback modes (A 80). • If the camera is turned off, hold down the c button to turn the camera on in playback mode. 6 Basic Operations Shutter-release Button Press the shutter-release button halfway to set focus and exposure Introduction The camera features a two-stage shutter-release button. To set focus and exposure, press the shutter-release button halfway, stopping when you feel resistance. Focus and exposure lock while the shutter-release button is held in this position. To release the shutter and take a picture, press the shutter-release button the rest of the way down. Do not use force when pressing the shutter-release button, as this may result in camera shake and blurred pictures. Press the shutter-release button the rest of the way down to take picture Attaching the Camera Strap 7 Operating the Touch Panel The monitor on the COOLPIX S4000 is a touch panel display. Use a finger or the supplied stylus to operate the touch panel. Introduction Tapping Tap the touch panel. Use this operation to: Select icons or other controls Select pictures in thumbnail playback mode (A 77) Perform touch shutter (A 34), touch AF/AE (A 37), or subject tracking (A 40) operations Start/end recording movies (A 119) Dragging Drag your finger across the touch panel. Use this operation to: Scroll through pictures in full-frame playback mode (A 32) Move the visible portion of a picture enlarged with playback zoom (A 79) Use sliders to adjust exposure compensation (A 52) or other settings 8 Operating the Touch Panel Using the Stylus Introduction Use the stylus for operations, such as when using the paint option (A 107) or the draw option (A 69), that require more precision than using a finger is possible. Attaching the Stylus Attach the stylus to the strap as shown. B Notes on the Touch Panel • Do not press on the touch panel with pointed objects other than the supplied stylus. • Do not apply unnecessary pressure to the touch panel. B Notes on Tapping/Dragging • The camera may not respond if your finger is left in one place too long. • The camera may not respond if the followings are made. - Bounce your finger off the display - Drag your finger over too short a distance - Stroke the display too lightly - Move your finger too quickly B Notes on the Touch Panel • Keep the stylus out of reach of small children. • Do not carry the camera by the stylus. The stylus may slip off the strap and the camera may fall. 9 Main Display of the Monitor/Touch Panel and Basic Operations Shooting (Operation Controls) Introduction Tap the following controls to change settings. • The controls available and indicators displayed vary with information display on/off, shooting mode and the current camera settings. 1 2 3 6 4 7 5 1 2 3 4 C 5 Flash mode .................................................. 42 Self-timer....................................................... 44 6 Macro mode................................................ 45 A Information display setting 7 Hue adjustment (in Food scene mode) ..................................................................66 Touch shooting w Touch shutter .....................................34 x Touch AF/AE........................................37 y Subject tracking ................................40 a Touch AF/AE cancellation...........37 F Menu................................................................14 Information Display Setting Tap A to toggle the information display on and off in the following order. Monitor displays with the information display on are used for explanation purposes in this manual. Information display on 11 The view through the lens, operation controls, and shooting information are displayed. 10 Framing grid 11 A framing grid (displayed only in A (auto) mode) to help frame pictures is displayed. Information display off Main Display of the Monitor/Touch Panel and Basic Operations Shooting (Other Indicators) 1 2 3 4 567 25 24 14 15 23 22 21 1 2 3 4 5 6 7 8 9 10 11 12 13 Introduction The following monitor display shows the current settings applied from the shooting menu (A 47) as well as the active focus area. • The indicators displayed vary with current camera settings and shooting mode. 16 Start 999 20 19 18 17 Shooting mode* .................26, 59, 72, 119 Continuous shooting mode, BSS..........53 F Macro mode................................................ 45 Zoom indicator...................................... 29, 45 B Battery level indicator ........................... 26 s Motion detection.................................. 146 r Electronic VR icon ................................. 145 14 15 999 9999 1 00 1 00 a b Date imprint ............................................. 144 Image mode................................................48 Movie options ......................................... 121 a Number of exposures remaining 16 (still pictures)...............................................26 b Movie length............................................ 119 17 C Internal memory indicator .................27 18 8 9 10 11 Skin softening............................................. 74 Smile timer................................................... 74 Blink proof .................................................... 74 White balance mode ............................. 50 12 “Date not set” indicator ......................... 163 13 Travel destination icon .......................... 141 Exposure compensation value ........52 19 Subject tracking start indicator............40 E z 20 ISO sensitivity......................................43, 54 21 Focus area (subject tracking mode)....40 22 Focus area (touch AF/AE)........................37 23 Focus area (face priority)..................30, 55 24 Focus area (center)......................................55 25 Focus area (auto) ..................................30, 55 * Indicators displayed vary with current shooting mode. 11 Main Display of the Monitor/Touch Panel and Basic Operations Playback (Operation Controls) Introduction Tap the following controls to switch between monitor displays, or delete or edit pictures. • The controls available and indicators displayed vary with information display on/off, the picture played back and the current camera settings. 2 3 4 5 6 1 1 2 3 A Information display setting B Display previous picture...................... 32 X Volume ..............................................104, 123 C Display subsequent picture............... 32 4 5 6 C D Editing (still pictures) .............................................81, 102, 103, 105 G Crop............................................................... 118 R Movie playback ...................................... 123 E Delete ..............................................................33 F Menu................................................................14 Information Display Setting Tap A to toggle the information display on and off in the following order. Monitor displays with the information display on are used for explanation purposes in this manual. Photo information on 15/05/2010 15:30 0004.JPG 4 12 4 Picture, operation controls, and photo information are displayed. Information off Main Display of the Monitor/Touch Panel and Basic Operations Playback (Information Display) 12 3 45 Introduction The following monitor display shows information for the picture currently displayed. • The controls and indicators displayed vary depending upon the picture played back and the current camera settings. 15/05/2010 15:30 0004 . J PG 6 7 999 999 10 9 8 1 1 2 Playback mode1 .....................32, 81, 88, 91 2 File number and type ............................. 162 3 Date/time of recording............................. 22 4 Protect icon................................................... 100 5 B Battery level indicator ........................... 26 6 w Print-order icon..................................... 94 g Skin softening icon.......................... 112 a Quick retouch icon .......................... 110 c D-Lighting icon.................................. 111 d Paint icon............................................... 107 b Color options icon ........................... 117 P Stretch icon .......................................... 114 O Perspective control icon .............. 115 p Voice memo icon ............................. 104 Small picture icon ............... 116 999 / 999 9999 / 9999 1 00 1 00 a b 7 a Current frame number/ total number of frames ........................32 b Movie length............................................ 123 8 C Internal memory indicator .................27 9 Image mode................................................48 Movie options ......................................... 121 Album icon in favorite pictures mode2 ...........................83 10 Category icon in auto sort mode2 ............................................88 Indicators displayed vary with current playback mode. The icon for the selected album or category in auto sort mode currently selected in playback mode is displayed. 13 Main Display of the Monitor/Touch Panel and Basic Operations The Menu Screen Introduction Tap F to display the menu for the selected mode. • Tap a tab at the top of the menu screen to switch to the menu for that tab. • Tap H to exit the menu. Displayed when the menu contains two or more pages Display the setup menu Display the available menu in the current mode Image mode White balance Exposure comp. Continuous ISO sensitivity AF area mode Display previous or subsequent page Display the help screen (A 15) Exit the menu and return to shooting or playback mode Autofocus mode Autofocus mode Single AF Full-time AF Return to the previous screen Tap the menu item to proceed to the next set of options 14 Tap the option to apply the selection Main Display of the Monitor/Touch Panel and Basic Operations Help Display Introduction Tap the control when u is displayed in the monitor to display the help selection screen. Tap a menu item or option to view a description of that feature or setting. Tap J to return to the previous screen. White balance Image mode White balance Image mode White balance Exposure comp. Continuous Exposure comp. Continuous ISO sensitivity AF area mode ISO sensitivity AF area mode For accurate color reproduction, choose a setting that matches the light source. 15 First Steps Inserting the Battery Insert a Rechargeable Li-ion Battery EN-EL10 (supplied) into the camera. • Charge the battery before the first use or when the battery is running low (A 18). Open the battery-chamber/memory card slot cover. 2 Insert the battery. First Steps 1 Confirm that the positive (+) and negative (–) terminals are oriented correctly as shown on the label at the battery chamber opening, and insert the battery. Use the battery to push the orange battery latch up (1) as the battery is inserted (2). When the battery is fully inserted, the battery latch will lock it in place. B Inserting the Battery Inserting the battery upside down or backwards could damage the camera. Be sure to check that the battery is in the correct orientation. 3 16 Close the battery-chamber/memory card slot cover. Inserting the Battery Removing the Battery B First Steps Turn the camera off (A 21) and make sure that the power-on lamp and the monitor have turned off before opening the battery-chamber/memory card slot cover. To eject the battery, open the battery-chamber/ memory card slot cover and slide the orange battery latch in the direction indicated by the arrow (1). The battery can then be removed by hand (2). • Note that the battery may become hot during use; observe due caution when removing the battery. Notes on the Battery • Be sure to read and follow the warnings for the battery on page iii and the section, “The Battery” (A 158), before using the battery. • If the battery is not used for an extended period, recharge it at least once every six months and run it flat before returning it to storage. 17 Charging the Battery Charge the supplied Rechargeable Li-ion Battery EN-EL10 inserted into the camera, by connecting the supplied Charging AC Adapter EH-68P to the camera via the supplied USB Cable UC-E6, and then plugging the Charging AC Adapter into an electrical outlet. 1 Prepare the Charging AC Adapter EH-68P. First Steps If a plug adapter* is included, attach the plug adapter to the plug on the Charging AC Adapter. Push the plug adapter firmly until it is securely held in place. Once the two are connected, attempting to forcibly remove the plug adapter could damage the product. * The shape of the plug adapter varies according to the country or region in which the camera was purchased. For Customers in Argentina If the camera was purchased in Argentina, the shape of the Charging AC Adapter EH-68P (AR) differs from that supplied in other countries, and a plug adapter is not included. Proceed to step 2. EH-68P (AR) 2 Be sure that the power-on lamp and the monitor are off. Be sure to insert the battery into the camera (A 16) and turn off the camera (A 21). 3 Use the supplied USB cable to connect the Charging AC Adapter to the camera. USB cable B 18 Connecting the Cable When connecting the cable, be sure that the camera connector is properly oriented. Do not use force when connecting the cable to the camera. When disconnecting the cable, do not pull the connector at an angle. Charging the Battery 4 Plug the Charging AC Adapter into an electrical outlet. The charge lamp slowly blinks green to indicate that the battery is charging. The following chart explains charge lamp status when the camera is plugged into the electrical outlet. Charge lamp 5 First Steps About two hours and ten minutes are required to charge a fully exhausted battery. Description Blinks slowly (green) Battery charging. Off Battery not charging. When charging is complete, the charge lamp stops blinking green and turns off. Flickers (green) • The ambient temperature is not suited to charging. Charge the battery indoors with an ambient temperature of 5 °C to 35 °C (41 °F to 95 °F). • The USB cable or Charging AC Adapter is not properly connected, or there is a problem with the battery. Disconnect the USB cable or unplug the Charging AC Adapter and correctly connect it again, or change the battery. Disconnect the Charging AC Adapter from the electrical outlet and then disconnect the USB cable. 19 Charging the Battery B Notes on Charging AC Adapter First Steps • The Charging AC Adapter EH-68P is for use only with compatible devices. Do not use with another make or model of device. • Be sure to read and follow the warnings for the Charging AC Adapter on page iii and the section, “The Battery” (A 158), before use. • The Charging AC Adapter EH-68P can be used with AC power sources of 50/60 Hz and 100-240 V. To use the charging AC adapter abroad, be sure to use a power adapter (available commercially) where necessary. Check beforehand with your travel agent regarding the necessity for power adapter plugs. • The Charging AC Adapter EH-68P is for charging the battery inserted into the camera. When the camera is connected to an electrical outlet with the Charging AC Adapter, the camera cannot be turned on. • Do not, under any circumstances, use another make or model of AC adapter other than Charging AC Adapter EH-68P or USB-AC adapter. Failure to observe this precaution could result in overheating or in damage to the camera. C Note on AC Power Supply • If the AC Adapter EH-62D (available separately; A 160) is used, power is supplied to the camera from an electrical outlet and taking pictures and playing back pictures are available with this camera. • Do not, under any circumstances, use another make or model of AC adapter other than EH-62D. Failure to observe this precaution could result in overheating or in damage to the camera. D Charging Using Computer or Battery Charger • Connecting the COOLPIX S4000 to a computer also charges the Rechargeable Li-ion Battery ENEL10 (A 126, 152). • Rechargeable Li-ion Battery EN-EL10 can also be charged using the Battery Charger MH-63 (available separately; A 160). 20 Charging the Battery Turning On and Off the Camera C First Steps To turn on the camera, press the power switch. The power-on lamp (green) will light for a moment and the monitor will turn on. To turn off the camera, press the power switch again. When the camera is turned off, both the power-on lamp and monitor will turn off. • If the camera is turned off, hold down the c button to turn the camera on in playback mode (A 33). Power Saving Function (Auto Off) If no operations are performed for a while, the monitor will turn off automatically, the camera will enter standby mode, and the power-on lamp will blink. If no operations are performed for another three minutes, the camera will turn off automatically. • If no operations are performed for about a minute (default setting) in shooting or playback mode, the camera will enter standby mode. • When the monitor has turned off in standby mode (the power-on lamp is blinking), press the following button to reactivate it. Power switch, shutter-release button, A button, or c button • The time allowed to elapse from before the camera enters standby mode can be changed from the Auto off option (A 149) in the setup menu (A 138). 21 Setting Display Language, Date and Time A language-selection dialog is displayed the first time the camera is turned on. 1 Press the power switch to turn on the camera. The power-on lamp (green) will light for a moment and the monitor will turn on. First Steps 2 Tap the desired language. If the desired language is not displayed, tap A or B to view other language options. For more information about operating the touch panel, see “Operating the Touch Panel” (A 8). Language Čeština Dansk Deutsch English Español Ελληνικά Français Indonesia . 3 Tap Yes. If No is tapped, the date and time will not be set. Date Set time and date? Yes 4 D Tap C or D to select your home time zone (A 143) and tap I. Daylight Saving Time If daylight saving time is in effect, tap p in the time zone selection screen displayed in step 4 to turn on the daylight saving time option. When the daylight saving time option is enabled, W is displayed at the top of the monitor. To turn off the daylight saving time option, tap p again. 22 London Casablanca London Casablanca No Setting Display Language, Date and Time 5 Edit the date and time. Tap the desired item and B or C to edit the highlighted item. 7 Tap I. The settings are applied and monitor display exits to shooting mode. D Date DMY 00 00 01 01 2010 DMY 00 00 01 01 2010 DMY 14 30 15 05 2010 First Steps 6 Tap B or C to choose the order in which the day, month and year are displayed. Date Date Changing and Imprinting the Date and Time • Select Date from the Date item (A 141) in the setup menu (A 138) to change the current date and time and follow the procedure described in step 5 above. • Select Time zone from the Date item (A 141) in the setup menu to change the time zone and daylight saving time settings. • To imprint the date on pictures, enable date imprint from the Date imprint option (A 144) in the setup menu after the date and time have been set. 23 Inserting Memory Cards First Steps Image, sound, and movie files are stored in the camera’s internal memory (approximately 45 MB) or on removable Secure Digital (SD) memory cards (available commercially; A 161). If a memory card is inserted in the camera, data are automatically stored on the memory card and data recorded to the memory card can be played back, deleted or transferred. Remove the memory card to store data in the internal memory, or play back, delete or transfer data from the internal memory. 1 Be sure that the power-on lamp and the monitor are off and open the batterychamber/memory card slot cover. Be sure to turn off the camera before opening the battery-chamber/memory card slot cover. 2 Insert the memory card. Slide the memory card in correctly until it clicks into place. Close the battery-chamber/memory card slot cover. B Inserting Memory Cards Inserting the memory card upside down or backwards could damage the camera or the memory card. Be sure to check that the memory card is in the correct orientation. Removing Memory Cards Before removing memory cards, turn the camera off and confirm that the power-on lamp and monitor are off. Open the battery-chamber/memory card slot cover and press the card in (1) to partially eject the card. The card can then be removed by hand. Do not attempt to remove the card at an angle (2). 24 Inserting Memory Cards B Formatting Memory Cards B The Write Protect Switch Memory cards are equipped with a write protect switch. When this switch is in the “lock” position, data cannot be written to, or deleted from, the memory card. If the switch is in the “lock” position, unlock it by sliding the switch to the “write” position to record or delete pictures, or to format the memory card. B First Steps If the message at right is displayed when the camera is turned on, the memory card must be formatted before use (A 150). Note that formatting permanently deletes all pictures and other data on Card is not formatted. the memory card. Be sure to make copies of any pictures you wish Format card? to keep before formatting the memory card. Tap Yes to format. When the confirmation dialog is displayed, tap Yes No Yes. To start formatting, tap OK. • Do not turn the camera off or open the battery-chamber/memory card slot cover until formatting is complete. • Be sure to use this camera to format memory cards previously used in other devices the first time they are inserted into the COOLPIX S4000 (A 150). Write protect switch Memory Cards • Use only Secure Digital memory cards. • Do not perform the following during formatting, while data is being written to or deleted from the memory card, or during data transfer to a computer. Failure to observe this precaution could result in the loss of data or in damage to the camera or memory card: - Take out the battery or memory card - Turn off the camera - Disconnect the AC adapter • Do not format the memory card using a computer. • Do not disassemble or modify. • Do not drop, bend, or expose to water or strong physical shock. • Do not touch the metal terminals with your fingers or metal objects. • Do not affix labels or stickers to the memory card. • Do not leave in direct sunlight, closed vehicles or areas exposed to high temperatures. • Do not expose to humidity, dust, or corrosive gases. 25 Basic Photography and Playback: A (Auto) Mode Step 1 Turn the Camera On and Select A (Auto) Mode This section describes how to take pictures in A (auto) mode, an automatic, “point-and-shoot” mode recommended for first-time users of digital cameras. 1 Press the power switch to turn on the camera. The power-on lamp (green) will light for a moment and the monitor will turn on. The lens will also extend. Proceed to step 4 when A is displayed. Basic Photography and Playback: A (Auto) Mode 2 Press the A button to display the shooting-mode selection menu. 3 Tap A in the monitor. The camera enters A (auto) mode. 4 Check the battery level and the number of exposures remaining. Auto mode Battery level indicator Battery Level Monitor Description NO INDICATOR Battery fully charged. B Battery low. Prepare to charge or replace the battery. N Battery exhausted. Cannot take pictures. Recharge or replace with a fully charged battery. 11 Number of exposures remaining Number of Exposures Remaining The number of pictures that can be stored depends on the capacity of the internal memory or memory card and image mode setting (A 49). 26 Step 1 Turn the Camera On and Select A (Auto) Mode Indicators Displayed in A (Auto) Mode Shooting mode A displayed in A (auto) mode. Motion detection icon The effects of subject movement and camera shake are reduced. 11 Image mode The combination of image quality (compression) and image size is displayed. The default setting is M 4000×3000. • Tap A to change the information displayed in the monitor (A 10). • When the monitor has turned off in standby mode to save power, press the following button to reactivate it (A 149). - Power switch, the shutter-release button, or A button B Note on Touch Shutter At the default setting, the shutter can be released by simply tapping a subject in the monitor (A 34). Take care that you do not release the shutter accidently. D Basic Photography and Playback: A (Auto) Mode Internal memory indicator Indicates that images will be stored in the camera’s internal memory (approximately 45 MB). When a memory card is inserted in the camera, C does not appear and images will be stored on the memory card. Functions Available in A (Auto) Mode • The touch shutter (A 34), touch AF/AE (A 37), or subject tracking (A 40) function can be enabled. • The flash mode (A 42) can be adjusted, the self-timer (A 44) and macro mode (A 45) can be applied. • Tapping F to specify settings for all shooting menu items (A 47) according to the shooting conditions. D Motion Detection See Motion detection (A 146) in the setup menu (A 138) for more information. D Electronic Vibration Reduction When the flash mode (A 42) is set to W (off) or Y (slow sync) with Electronic VR (A 145) in the setup menu set to Auto, the r icon may be displayed in the monitor. When r is displayed, the effects of camera shake may be pronounced under the current shooting conditions. In these situations, the camera reduces the effects of camera shake in pictures before recording them. 27 Step 2 Frame a Picture 1 Ready the camera. Hold the camera steadily in both hands, keeping your fingers and other objects away from the lens, flash, AFassist illuminator, microphone, and speaker. When taking pictures in portrait (“tall”) orientation, turn the camera so that the built-in flash is above the lens. Basic Photography and Playback: A (Auto) Mode 28 2 Frame the picture. At the default settings, a face recognized by the camera will be framed by a yellow double border (focus area). Up to 12 faces can be recognized. If more than one face is recognized, the face closest to the camera will be framed by a double border, and the others by a single border. 11 When taking pictures of subjects other than people, or framing a subject with which no face is recognized, a focus area will not be displayed. Frame the picture so that the intended subject is at or near the center of the frame. Step 2 Frame a Picture Using the Zoom Use the zoom control to activate optical zoom. Rotate the zoom control to g to zoom in so that the subject fills a larger area of the frame, or f to zoom out, thus increasing the area visible in the frame. Zoom out Zoom in A zoom indicator is displayed at the top of the monitor when the zoom control is rotated. Digital zoom Digital Zoom When the camera is zoomed in to the maximum optical zoom position, rotating and holding the zoom control at g triggers digital zoom. The subject is magnified up to 4× the maximum optical zoom ratio. The camera focuses at the center of the frame and the focus area is not displayed when digital zoom is in effect. Maximum optical zoom C Basic Photography and Playback: A (Auto) Mode Optical zoom Digital zoom enabled Digital Zoom and Interpolation Unlike optical zoom, digital zoom uses a digital imaging process known as interpolation to magnify images, resulting in slight deterioration of picture quality according to the image mode (A 48) and digital zoom magnification. Interpolation is applied at zoom positions beyond V when taking still pictures. When zoom is increased beyond the V position, interpolation is initiated and the zoom indicator turns yellow to indicate that interpolation is being applied. The position of V moves to the right as image size decreases, allowing for confirmation of the zoom positions at which shooting without interpolation is possible at the current image mode setting. Small image size Digital zoom can be disabled from the Digital zoom option (A 148) in the setup menu (A 138). 29 Step 3 Focus and Shoot 1 Press the shutter-release button halfway. Focus is locked when the shutter-release button is pressed halfway. When a face is recognized, it is framed by the double border indicating the active focus area. When the subject is in focus, the double border turns green. Basic Photography and Playback: A (Auto) Mode 1 250 F3.2 Aperture Shutter speed When a face is not recognized, camera automatically selects the focus area (up to nine areas) containing the subject closest to the camera. When the subject is in focus, the active focus area glows green. 1 250 F3.2 Aperture Shutter speed When digital zoom is used, the focus area is not displayed and the camera focuses at the center of the frame. Once focus has been acquired, the focus indicator will glow green. Focus indicator When the shutter-release button is pressed halfway, the shutter speed and aperture value are also displayed. Focus and exposure remain locked while the shutter-release button is pressed halfway. 1 125 F5.9 While the shutter-release button is pressed halfway, the focus area or focus indicator may blink red. This indicates that the camera is unable to focus. Modify the composition and press the shutter-release button halfway again. 2 Press the shutter-release button the rest of the way down. The shutter is released and the picture will be recorded to the memory card or internal memory. 30 Step 3 Focus and Shoot B During Recording While pictures are being recorded, the number of exposures remaining will blink. Do not open the battery-chamber/memory card slot cover while pictures are being recorded. Cutting power or removing the memory card in these circumstances could result in loss of data or in damage to the camera or card. B Autofocus B Note on Face Priority See AF area mode (A 55) or Face priority (A 56) for more information. C Touch Shutter Basic Photography and Playback: A (Auto) Mode Autofocus may not perform as expected in the following situations. In some rare cases, the subject may not be in focus despite the fact that the focus area or the focus indicator glows green. • Subject is very dark • Objects of sharply differing brightness are included in the frame (e.g. the sun behind the subject makes that subject appear very dark) • No contrast between the subject and surroundings (e.g. a portrait subject, wearing a white shirt, is standing in front a white wall) • Several objects are at different distances from the camera (e.g. the subject is inside a cage) • Subject is moving rapidly In the situations noted above, try pressing the shutter-release button halfway to refocus several times, or focus on another subject (A 39). When focusing on another subject, be sure that the alternate subject is at the same distance from the camera as the intended subject while the shutterrelease button is pressed halfway. At the default setting, the shutter can be released by simply tapping a subject in the monitor (A 34) rather than by pressing the shutter-release button. The Touch shutter option can be changed to the Touch AF/AE option, with which the camera locks focus and exposure without releasing the shutter, when a subject is tapped (A 37). C Blink Warning screen When the camera detects that portrait subjects may have blinked when a picture was taken in face priority mode with d Blink warning set to On, the blink warning screen (A 153) is displayed in the monitor. D AF-assist Illuminator and Flash If the subject is poorly lit, the AF-assist illuminator (A 147) may light when the shutter-release button is pressed halfway, or the flash (A 42) may fire when the shutter-release button is pressed all the way down. 31 Step 4 Playing Back and Deleting Pictures Playing Back Pictures (Playback Mode) Press the c (playback) button 15/05/2010 15:30 0004.JPG 4 Basic Photography and Playback: A (Auto) Mode A (shooting mode) button c (playback) button 4 Internal memory indicator The last picture taken will be displayed in full-frame playback mode. Drag the current picture left or right to display the previous or subsequent picture. Previous or subsequent pictures can also be viewed by tapping B or C. Drag your finger quickly across half of the monitor or more to skip past the previous or subsequent five pictures. Tap the monitor to stop at a picture as it slides past. Display the previous picture 15/05/2010 15:30 0004.JPG 4 Display the subsequent picture 15/05/2010 15:30 0004.JPG 4 4 4 Pictures may be displayed briefly at low resolution while being read from the memory card or internal memory. Press the A button or the shutter-release button to switch to shooting mode. When playing back pictures stored in the camera’s internal memory, C is displayed. When a memory card is inserted in the camera, C is not displayed and images stored on the memory card are played back. Tap A to toggle displayed operation controls and information display on and off (A 12). 32 Step 4 Playing Back and Deleting Pictures Deleting Pictures 1 Tap E to delete the picture currently displayed in the monitor. 15/05/2010 15:30 0004.JPG 4 Tap Yes. Deleted pictures cannot be recovered. To exit without deleting the picture, tap No. Erase 1 image? Yes C No Operations Available in Playback Mode Basic Photography and Playback: A (Auto) Mode 2 4 See “More on Playback” (A 75) or “Editing Pictures” (A 105) for more information. C Pressing the c Button to Turn On the Camera When the camera is off, holding down the c button will turn the camera on in playback mode. The lens will not extend. C Viewing Pictures • When pictures in which a face was recognized during shooting (A 56) are displayed in full-frame playback mode, depending upon the orientation of the recognized face, the pictures may be automatically rotated for playback display (excluding pictures that were shot using Continuous, BSS and Multi-shot 16; A 53). • When the monitor has turned off in standby mode to save power, press the following button to reactivate it (A 149). - The power switch, shutter-release button, or c button D Deleting Multiple Pictures Multiple pictures can be deleted from the Delete option (A 98) in the playback menu (A 93), the favorite pictures menu (A 85), the auto sort menu (A 90), or the list by date menu (A 92). 33 Tapping the Monitor to Release the Shutter (Touch Shutter) Pictures can be taken by simply tapping the monitor. • When w (default setting) is displayed for the touch shooting indicator, proceed to step 3. 11 1 Tap the touch shooting icon. Basic Photography and Playback: A (Auto) Mode The touch shooting menu is displayed in the monitor. 11 2 Tap r (Touch shutter). w is displayed at right in the monitor in shooting mode. Touch shutter 3 Tap the desired subject to take a picture. Do not use force when tapping the monitor as this may cause slight movement of the camera, resulting in blurred pictures. When digital zoom is in effect, the camera focuses at the center of the frame. 11 The shutter-release button can also be used when the touch shutter option is selected. If X is displayed when the monitor is tapped, the shutter cannot be released. Tap an area within X or a border displayed when the camera recognizes a face. 11 34 Tapping the Monitor to Release the Shutter (Touch Shutter) B Notes on Touch Shutter C Shooting Modes That Support Touch Shutter Touch shutter can be enabled in shooting modes other than A (auto) mode as well. Touch shutter operation differs according to the current shooting mode as follows. Shooting mode Touch shutter operation A (auto) mode (A 26), Sports, Party/indoor, Beach/snow, Close-up, Food, Museum, Copy, and Backlight scene modes (A 59) Tap the intended subject. Focus and exposure are set for the area tapped. When the camera recognizes more than one face, tap a face framed by a single border to set focus and exposure for that face. Scene auto selector scene mode (A 59) and smart portrait mode (when Smile timer is set to Off; A 72) • When the camera recognizes a face, focus and exposure are set for the area framed by the double border. When the camera recognizes more than one face, tap a face framed by a single border to set focus and exposure for that face. • When no face is recognized, the camera focuses at the area tapped. Portrait and Night portrait scene modes (A 59) Only a border displayed by the face priority function can be selected. When the camera recognizes more than one face, tap a face framed by a single border to set focus and exposure for that face. Landscape, Sunset, Dusk/dawn, Night landscape, Fireworks show, and Panorama assist scene modes (A 59) Focus and exposure are set for the same focus area used when pictures are taken by pressing the shutter-release button. See “Selecting a Scene Mode to Take Pictures (Features)” (A 62) for more information. Smart portrait mode (when Smile timer set to On; A 72) Touch shutter cannot be enabled. When the camera recognizes more than one face, tap a face framed by a single border to move the focus area to that face. Basic Photography and Playback: A (Auto) Mode • When taking pictures with Continuous or BSS in Continuous setting (A 53) enabled, or in Sports or Museum scene mode (A 59), use the shutter-release button to take pictures. Only one picture can be taken at a time using the touch shutter function. • Prevent shooting with accidental tapping of the monitor in A (auto) mode and some scene modes by changing the touch shooting setting to Touch AF/AE (A 37). At this setting, the shutter is not released when the monitor is tapped. • In some rare cases, shooting subjects with which autofocus may not perform as expected, the subject may not be in focus (A 31). • When a subject displayed in the monitor is tapped with the self-timer (A 44) enabled, the camera locks focus and releases the shutter after ten or two seconds. 35 Tapping the Monitor to Release the Shutter (Touch Shutter) C Touch Shutter Function When Recording Movies Touch shutter is also available for movie recording. Movie recording can be initiated or stopped by tapping the monitor (A 119). C Touch Shooting Setting The touch shooting setting applied in A (auto) mode is stored in the camera’s memory even after the camera is turned off, and reapplied the next time A (auto) mode is selected. Basic Photography and Playback: A (Auto) Mode 36 Tapping the Monitor to Focus (Touch AF/AE) The touch shooting setting can be changed from Touch shutter (default setting) to Touch AF/AE. Tap a subject in the monitor to select the area at which the camera focuses. Press the shutter-release button halfway to lock focus and exposure for the area tapped, and press the shutter-release button the rest of the way down to take the picture. 1 Tap the touch shooting control. The menu of the touch shooting setting is displayed in the monitor. 2 Tap s (Touch AF/AE). x is displayed at right in the monitor in shooting mode. Touch shutter 3 Tap the subject at which the camera focuses. u or a double border will be displayed at the area tapped. Basic Photography and Playback: A (Auto) Mode 11 When digital zoom is applied, the focus area cannot be selected. To disable the focus area selection, tap a displayed at right in the monitor. 11 If a position at which focus cannot be acquired is tapped, X will be displayed in the monitor. Tap another position inside X. 11 4 Press the shutter-release button to take a picture. Press the shutter-release button halfway to acquire focus and exposure and press it all the way down to release the shutter. 37 Tapping the Monitor to Focus (Touch AF/AE) B Note on Touch AF/AE In some rare cases, shooting subjects with which autofocus may not perform as expected, the subject may not be in focus (A 31). C Shooting Modes That Enable Touch AF/AE Function Touch AF/AE can be enabled in shooting modes other than A (auto) mode as well. Touch AF/AE operation differs according to the current shooting mode as follows. Shooting mode Touch AF/AE operation Basic Photography and Playback: A (Auto) Mode A (auto) mode (A 26), Sports, Party/indoor, Beach/snow, Close-up, Food, Museum, Copy, and Backlight scene modes (A 59) Focus and exposure are set for the area tapped. Scene auto selector scene mode (A 59) and smart portrait mode (when Smile timer is set to Off; A 72) • When the camera recognizes a face, only a face framed by a border can be selected. When the camera recognizes more than one face, tap a face framed by a single border to move the focus area to that face. • When no face is recognized, the camera focuses at the area tapped. Portrait and Night portrait scene modes (A 59), smart portrait mode (when Smile timer is set to On; A 72) Only a border displayed by the face priority function can be selected. When the camera recognizes more than one face, tap a face framed by a single border to move the focus area to that face. Landscape, Sunset, Dusk/dawn, Night landscape, Fireworks show, and Panorama assist scene modes (A 59) Focus area cannot be changed. C Touch Shooting Setting The touch shooting setting applied in A (auto) mode is stored in the camera’s memory even after the camera is turned off, and reapplied the next time A (auto) mode is selected. 38 Tapping the Monitor to Focus (Touch AF/AE) D Taking Pictures of Subjects with Which Autofocus may not Perform as Expected When taking pictures of subjects with which autofocus may not perform as expected (A 31), try pressing the shutter-release button halfway to refocus several times, or try the following techniques. 1 Switch to A (auto) mode and select Touch AF/AE for the touch shooting setting. • x is displayed at right in the monitor in shooting mode. Touch shutter desired subject. 11 3 Press the shutter-release button halfway. • Confirm that the focus area glows green. • Exposure is locked for the subject on which focus is acquired when the shutter-release button is pressed halfway. 1/250 F3.2 1/250 F3.2 4 Continue holding down the shutter-release button halfway and recompose the picture. • Be sure to maintain the same distance between the camera and the subject while the shutter-release button is pressed halfway. Basic Photography and Playback: A (Auto) Mode 2 Tap another subject that is as far from the camera as the 5 Press the shutter-release button the rest of the way down to take the picture. 39 Focusing on a Moving Subject (Subject Tracking) In A (auto) mode (A 26), the touch shooting setting can be changed from Touch shutter (default setting) to Subject tracking. Use this option to take pictures of moving subjects. Tap the subject on which the camera will focus. The focus area will automatically move to track the subject. 1 Tap the touch shooting control. The menu of the touch shooting setting is displayed in the monitor. Basic Photography and Playback: A (Auto) Mode 11 2 Tap s (Subject tracking). y is displayed at right in the monitor in shooting mode. s (subject tracking) is not enabled in shooting modes other than A (auto) mode. 3 Touch shutter Select a subject. Tap the desired tracking subject in the monitor. - The subject is selected. - When the border framing the subject glows red, the camera is unable to focus. Change the composition and try again. Star t 11 If an area that does not contain a selectable subject is tapped, X will be displayed in the monitor. Tap a subject within X. When the subject is selected, a yellow focus area is displayed around that subject and the camera begins tracking the subject. Tap another subject to change a subject to follow. To deselect the subject, tap a, displayed at right in the monitor. 11 If the camera cannot track the selected subject anymore, the focus area will disappear and the selection will be canceled. Select the subject again. 40 Focusing on a Moving Subject (Subject Tracking) 4 Press the shutter-release button to take a picture. The camera focuses on the focus area when the shutterrelease button is pressed halfway. The focus area will glow green and focus will be locked. When the camera is unable to focus, the focus area will blink. Press the shutter-release button halfway again to focus. 1/250 F3.2 Press the shutter-release button all the way down to release the shutter. B Notes on Subject Tracking Mode • Digital zoom is not available. • Adjust zoom position and apply flash or menu settings before selecting the subject. If these settings are adjusted after the subject has been selected, subject selection will be canceled. • It may be impossible to select the desired subject, or the camera may be unable to track the selected subject or may begin tracking a different subject, if the subject is moving rapidly, if there is a significant amount of camera shake, or if the camera recognizes a similar subject. The camera’s ability to accurately track the selected subject is also dependent upon the size and brightness of the subject. • In some rare cases, subjects with which autofocus may not perform as expected (A 31) may be out of focus despite the fact that the focus area glows green. In this situation, focus on another subject which is at the same distance from the camera as the intended subject while the shutterrelease button is pressed halfway (A 39). • There may be functions with which this setting cannot be enabled. See “Camera Settings that Cannot Be Applied Simultaneously” (A 58) for more information. C Basic Photography and Playback: A (Auto) Mode If the shutter-release button is pressed halfway while the focus area is not displayed, focus is set at the center of the frame. Functions That is available in Subject Tracking Mode • Flash mode (A 42) can be changed. • Self-timer (A 44), and macro mode (A 45) is not available. C Touch Shooting Setting • The touch shooting setting applied in A (auto) mode is stored in the camera’s memory even after the camera is turned off, and reapplied the next time A (auto) mode is selected. • Subject selection with subject tracking will be canceled when the camera is turned off. 41 Using the Flash When ISO sensitivity is set to Auto, the flash has a range of 0.5-4.5 m (1 ft. 8 in.14 ft.) at the maximum wide-angle zoom position and a range of 0.5-2.4 m (1 ft. 8 in.-7 ft. 10 in.) at the maximum telephoto zoom position. The following flash modes are available. U Auto Flash fires automatically when lighting is poor. V Auto with red-eye reduction Basic Photography and Playback: A (Auto) Mode Reduce “red-eye” in portraits (A 43). W Off Flash will not fire even when lighting is poor. X Fill flash Flash fires whenever a picture is taken. Use to “fill-in” (illuminate) shadows and backlit subjects. Y Slow sync U (auto) is combined with slow shutter speed. Suited to evening and night portraits that include background scenery. Flash illuminates main subject; slow shutter speeds are used to capture background at night or under dim lighting. Setting the Flash Mode 1 Tap the flash mode control. The flash mode menu is displayed. 11 2 Tap the desired flash mode control. The icon for the selected flash mode is displayed at the top of the monitor. When H is tapped, the menu will close and the monitor display will return to shooting mode without changing the flash mode. 42 Flash mode Using the Flash B Shooting When the Flash Is Disabled (W) or Lighting Is Dim • Use of a tripod is recommended to stabilize the camera during shooting and avoid the effects of camera shake. • The E indicator is displayed when the camera automatically increases sensitivity. Pictures taken when E is displayed may be slightly mottled. • The noise reduction function may be activated with some shooting conditions such as dim lighting. More time than usual is required to record pictures to which noise reduction is applied. B Note on Using the Flash C The Flash Lamp The flash lamp indicates flash status when the shutterrelease button is pressed halfway. • On: Flash will fire when picture is taken. • Blinks: Flash charging. Wait a few seconds and try again. • Off: Flash will not fire when picture is taken. If the battery is low, the monitor display will turn off, and remain off, until the flash is fully charged. C The Flash Mode Setting The default flash mode setting varies with shooting mode. • A (auto) mode: U (auto) • Scene: varies with the selected scene mode (A 62) • F (smart portrait): fixed at U (auto) when Off is selected for Blink proof; W (off) when On is selected for Blink proof (A 74) There may be functions with which the flash cannot be enabled. See “Camera Settings that Cannot Be Applied Simultaneously” (A 58) for more information. The flash mode setting applied in A (auto) mode is stored in the camera’s memory even after the camera is turned off, and reapplied the next time A (auto) mode is selected. C Basic Photography and Playback: A (Auto) Mode When using the flash, reflections from dust particles in the air may appear as bright spots in pictures. To reduce these reflections, set the flash to W (off). Red-eye Reduction This camera uses advanced red-eye reduction (“In-Camera Red-Eye Fix”). If the camera detects “red eye” while a picture is being recorded, the affected area will be processed to reduce red-eye before the picture is saved. Note the followings when shooting. • More time than usual is required to record pictures. • Red-eye reduction may not produce the desired results in all situations. • In extremely rare instances, areas not subject to red-eye may be affected by red-eye reduction processing; in these cases, choose another flash mode and try again. 43 Taking Pictures with the Self-timer The camera is equipped with a ten-second and two-second timer for self-portraits. This feature is useful for reducing the effects of camera shake that occurs when pressing the shutter-release button. When using the self-timer, use of a tripod is recommended. 1 Tap the self-timer control. The self-timer menu is displayed. Basic Photography and Playback: A (Auto) Mode 11 2 Tap 10s or 2s. 10s (ten seconds): Use on important occasions, such as weddings 2s (two seconds): Use to prevent camera shake The selected self-timer mode is displayed. Tap H to close the menu and return to shooting mode without changing the self-timer setting. 3 Self-timer Frame the picture and press the shutter-release button halfway. Focus and exposure will be set. 1 250 F3.2 4 Press the shutter-release button the rest of the way down. The self-timer starts, and the number of seconds remaining before the shutter is released is displayed in the monitor. The selftimer lamp blinks while the timer is counting down. About one second before the shutter is released, the lamp stops blinking and glows steadily. When the shutter is released, the self-timer will be set to OFF. To stop the timer before a picture is taken, press the shutter-release button again. 44 1 250 F3.2 Macro Mode Macro mode is used for taking pictures of objects as close as 8 cm (3.2 in.). Note that the flash may be unable to light the entire subject at distances of less than 50 cm (1 ft. 8 in.). 1 Tap the macro mode control. The macro mode menu is displayed. 2 Tap o. The macro mode icon (F) is displayed. When H is tapped, the menu will close and the monitor display will return to shooting mode without changing the macro mode setting. 3 Macro mode Rotate the zoom control to frame the picture. The closest distance at which the camera can focus varies depending on the zoom position. The camera can focus at the shortest distances when F and the zoom indicator glow green with the zoom indicator positioned to the left (wider angle) of G. Basic Photography and Playback: A (Auto) Mode 11 At the zoom position one step to the right (telephoto) of the maximum wide-angle zoom position, the camera can focus on subjects as close as 8 cm (3.2 in.) to the lens. At 999 the maximum wide-angle zoom position and G zoom position, the camera can focus at a distance of 20 cm (8 in.). C Autofocus When using A (auto) mode, if Autofocus mode (A 57) is set to Full-time AF, the camera focuses continuously until focus is locked when the shutter-release button is pressed halfway. Therefore, the sound of lens drive movement can be heard. When using other shooting modes of still pictures, Full-time AF is turned on automatically when macro mode is turned on. C The Macro Mode Setting The macro mode setting applied in A (auto) mode is stored in the camera’s memory even after the camera is turned off, and reapplied the next time A (auto) mode is selected. 45 More on Shooting Selecting a Shooting Mode Select a shooting mode from A (auto), x (scene), F (smart portrait), and D (movie) modes. 1 Press the A button in shooting mode. The shooting mode-selection menu is displayed. 2 Tap the desired shooting mode control. The camera enters the selected shooting mode. More on Shooting If the scene mode control (second control from the top) was tapped, tap the desired scene mode icon (A 59). 1 2 3 4 Auto mode To return to the current shooting mode without switching shooting modes, press the A button or the shutter-release button. 1 A Auto mode A 26 Pictures can be taken with an automatic, “point-and-shoot” mode recommended for first-time users of digital cameras. The subject tracking setting can be applied. Shooting settings such as continuous shooting can be applied from the shooting menu (A 47). 2 x Scene mode A 59 Camera settings are automatically optimized for the selected scene. In scene auto selector mode, the camera automatically selects the optimum scene mode for simpler shooting. 3 F Smart portrait mode A 72 The camera uses face priority to recognize human faces, and then automatically releases the shutter when a smile is detected. The skin softening option can be used to make skin tones of human faces displayed smoothly. 4 D Movie Movie (with sound) can be recorded. 46 A 119 Shooting Options: Shooting Menu (A (Auto) Mode) The following options can be set when shooting in A (auto) mode (A 26). A 48 Image mode Choose the image mode (combination of image size and compression rate) at which pictures are recorded. The image mode setting can also be modified from other shooting modes (except movie recording). A 50 White balance Match white balance to the light source. A 52 Exposure comp. Alter exposure to make pictures brighter or darker. A 53 Continuous A 54 ISO sensitivity Control the camera’s sensitivity to light. A 55 AF area mode Choose how the camera selects the focus area. More on Shooting Enable continuous shooting or BSS (best shot selector). A 57 Autofocus mode Choose how the camera focuses. Displaying the Shooting Menu Enter A (auto) mode (A 26). Tap F to display the shooting menu. 11 Image mode White balance Exposure comp. Continuous ISO sensitivity AF area mode • Tap menu items to adjust settings. • Tap H to exit the shooting menu. B Camera Settings That cannot be Applied Simultaneously Some functions cannot be enabled in conjunction with others (A 58). 47 Shooting Options: Shooting Menu (A (Auto) Mode) Image Mode (Image Quality/Image Size) A (auto) M F (Shooting menu) M Image mode Image mode refers to the combination of image size and image quality (compression) at which pictures are recorded. Choose the image mode best suited to the manner in which pictures will be used and the capacity of the internal memory or memory card. The higher the image mode setting, the larger the size at which it can be printed or displayed without appearing noticeably “grainy,” but limiting the number of pictures that can be recorded. More on Shooting Option Size (pixels) H 4000×3000P 4000 × 3000 I 4000×3000 (default setting) 4000 × 3000 R 3264×2448 3264 × 2448 L 2592×1944 2592 × 1944 M 2048×1536 2048 × 1536 Smaller size than I, R, or L, allows more pictures to be stored. The compression ratio is approximately 1:8. N 1024×768 1024 × 768 Suited to display on a computer monitor. The compression ratio is approximately 1:8. O 640×480 640 × 480 Suited to full-screen display on a television with an aspect ratio of 4:3, or distribution by e-mail. The compression ratio is approximately 1:8. 3968 × 2232 Pictures with an aspect ratio of 16:9 are taken. The compression ratio is approximately 1:8. P 3968×2232 Description Higher quality than I suitable for enlargements or high-quality prints. The compression ratio is approximately 1:4. Best choice in most situations. The compression ratio is approximately 1:8. The icon for the current setting is displayed in the monitor in shooting and playback modes (A 11, 13). C 48 Image Mode • Changes made to this setting apply to all shooting modes (except movie recording). • There may be functions with which this setting cannot be enabled. See “Camera Settings that Cannot Be Applied Simultaneously” (A 58) for more information. Shooting Options: Shooting Menu (A (Auto) Mode) C Number of Exposures Remaining The following table lists the approximate number of pictures that can be stored in internal memory and on a 4 GB memory card. Note that the number of pictures that can be stored will differ depending on the composition of the picture (due to JPEG compression). In addition, this number may vary depending on the make of memory card, even when the memory cards have the same specified capacity. Setting Print size2 (cm/in.) 505 34 × 25/13 × 10 1010 34 × 25/13 × 10 R 3264×2448 17 1575 28 × 21/11 × 8 22 × 16/8.5 × 6.5 L 2592×1944 28 2565 M 2048×1536 46 4235 17 × 13/7 × 5 N 1024×768 134 13500 9 × 7/3.5 × 2.5 O 640×480 260 23000 5 × 4/2 × 1.5 14 1370 34 × 19/13 × 7.5 More on Shooting 5 11 P 3968×2232 2 Memory card1 (4 GB) I 4000×3000 H 4000×3000P 1 Internal memory (approx. 45 MB) If the number of exposures remaining is 10,000 or more, the number of exposures remaining display shows “9999”. Print size at an output resolution of 300 dpi. Print sizes are calculated by dividing the number of pixels by printer resolution (dpi) and multiplying by 2.54 cm (1 in.). However, at the same image size, pictures printed at higher resolutions will print smaller than the size indicated, and those printed at lower resolutions will print larger than the size indicated. 49 Shooting Options: Shooting Menu (A (Auto) Mode) White Balance (Adjusting Hue) A (auto) M F (Shooting menu) M White balance More on Shooting The color of light reflected from an object varies with the color of the light source. The human brain is able to adapt to changes in the color of the light source, with the result that white objects appear white whether seen in the shade, direct sunlight, or under incandescent lighting. Digital cameras can mimic this adjustment by processing images according to the color of the light source. This is known as “white balance.” For natural colors, choose a white balance setting that matches the light source before shooting. Although the default setting, Auto, can be used under most types of lighting, the white balance setting suited to a particular light source can be specified manually to achieve more accurate results. a Auto (default setting) White balance automatically adjusted to suit lighting conditions. Best choice in most situations. b Preset manual Neutral-colored object used as reference to set white balance under unusual lighting conditions. See “Preset Manual” (A 51) for more information. c Daylight White balance adjusted for direct sunlight. d Incandes. Use under incandescent lighting. e Fluorescent Use under fluorescent lighting. f Cloudy Use when taking pictures under overcast skies. g Flash Use with the flash. At settings other than Auto, the icon for the current setting is displayed in the monitor (A 11). B 50 Notes on White Balance • There may be functions with which this setting cannot be enabled. See “Camera Settings that Cannot Be Applied Simultaneously” (A 58) for more information. • At white-balance settings other than Auto or Flash, turn the flash off (W) (A 42). Shooting Options: Shooting Menu (A (Auto) Mode) Preset Manual Preset manual is effective with mixed lighting or to compensate for light sources with a strong color cast (for example, to make pictures taken under a lamp with a red shade look as though they had been taken under white light). 1 Place a white or gray reference object under the lighting that will be used during shooting. 2 Display the shooting menu (A 47), tap White balance to select b Preset manual, and tap I. Auto Preset manual Daylight 3 Frame the reference object in the measuring window. To apply the most recently measured value for preset manual, tap Cancel. Preset manual Cancel More on Shooting The camera zooms in. White balance Measure Measuring window 4 Tap Measure to measure a value for preset manual. The shutter is released and the new white balance value is set. No picture is recorded. B Preset manual Cancel Measure Note on Preset Manual A value for flash lighting cannot be measured with Preset manual. When shooting using the flash, set White balance to Auto or Flash. 51 Shooting Options: Shooting Menu (A (Auto) Mode) Exposure Comp. (Adjusting Brightness) A (auto) M F (Shooting menu) M Exposure comp. More on Shooting Exposure compensation is used to alter exposure from Exposure compensation the value suggested by the camera to make pictures brighter or darker. • To make the picture brighter, tap D to apply positive -2 -1 0 +1 +2 (+) exposure compensation, and tap I. • To make the picture darker, tap C to apply negative (–) exposure compensation, and tap I. • Exposure compensation can also be applied or adjusted by dragging the slider. • Exposure compensation can be set to values between –2.0 and +2.0 EV. • When an exposure compensation value other than 0.0 is applied, the value is displayed with the H icon in the monitor. • To exit without setting the exposure compensation, set the value to 0.0 and tap I. C Exposure Compensation Value • Exposure compensation can be enabled in scene modes (except Fireworks show and Draw scene modes) and smart portrait mode. • The exposure compensation value applied in A (auto) mode is stored in the camera’s memory even after the camera is turned off, and reapplied the next time A (auto) mode is selected. The exposure compensation value applied in any scene mode or smart portrait mode reverts to 0.0 whenever another shooting mode is selected or the camera is turned off. D 52 Using Exposure Compensation The camera tends to reduce exposure when the frame is dominated by brightly lit objects and to increase exposure when the frame is mostly dark. Positive compensation may therefore be required to capture the brilliancy of very bright objects that fill the frame (for example, sunlit expanses of water, sand, or snow) or when the background is much brighter than the main subject. Negative compensation may be called for when large areas of the frame contain very dark objects (for example, a swath of dark green leaves) or when the background is much darker than the main subject. Shooting Options: Shooting Menu (A (Auto) Mode) Continuous A (auto) M F (Shooting menu) M Continuous Enable continuous shooting or BSS (best shot selector). The flash is disabled when Continuous, BSS or Multi-shot 16 is selected, and focus, exposure and white balance are fixed at the values determined with the first picture in each series. U Single (default setting) One picture is taken each time the shutter-release button is pressed. V Continuous While the shutter-release button is held down, up to three pictures are taken at a rate of about 0.9 frames per second (at an Image mode setting of I 4000×3000). BSS (Best Shot Selector) The “best shot selector” is recommended when shooting with the flash off or the camera zoomed in, or in other situations in which inadvertent motion can result in blurred pictures. When BSS is on, the camera takes up to ten pictures while the shutter-release button is held down. The sharpest picture in the series is automatically selected and saved. W More on Shooting D Multi-shot 16 Each time the shutter-release button is pressed, the camera takes 16 shots at a rate of about 30 fps and arranges them in a single image. Image mode is fixed at L (image size: 2560 × 1920 pixels). Digital zoom is not available. At settings other than Single, the indicator for the current setting is displayed in the monitor (A 11). B Notes on Continuous Shooting • The frame rate with continuous shooting may vary depending upon the current image mode setting, the memory card used, or shooting condition. • There may be functions with which this setting cannot be enabled. See “Camera Settings that Cannot Be Applied Simultaneously” (A 58) for more information. B Note on BSS BSS is effective when taking pictures of still subjects. BSS may not produce the desired results if the subject moves or the composition changes while the shutter-release button is held down. B Note on Multi-shot 16 Smear (A 159) visible in the monitor when shooting with Multi-shot 16 enabled will be recorded with images. Avoiding bright objects such as the sun, reflections of the sun, and electric lights when shooting with Multi-shot 16 enabled is recommended. 53 Shooting Options: Shooting Menu (A (Auto) Mode) ISO Sensitivity A (auto) M F (Shooting menu) M ISO sensitivity Sensitivity is a measure of the camera’s response to light. The higher the sensitivity, the less light is needed to expose an image. Although high ISO sensitivity settings are suited to pictures of moving subjects or those taken under dim lighting, high sensitivity settings are often associated with “noise”—randomly spaced, brightly colored pixels— concentrated in dark portions of images. Auto (default setting) More on Shooting Sensitivity is ISO 80 under normal conditions; when lighting is poor, the camera compensates by raising sensitivity to a maximum of ISO 1600. Fixed range auto Choose the range in which the camera automatically adjusts ISO sensitivity, from ISO 80-400 or ISO 80-800. The camera will not increase sensitivity beyond the maximum value in the selected range. Set the maximum value for ISO sensitivity for effective control over the amount of “grain” that appears in images. 80, 100, 200, 400, 800, 1600, 3200 Sensitivity is locked at the specified value. At the settings other than Auto, the current setting is displayed in the monitor (A 11). If Auto is selected and the sensitivity is raised above ISO 80, the E icon will be displayed (A 43). When Fixed range auto is selected, z and the maximum value of ISO sensitivity is displayed. B 54 Notes on ISO Sensitivity • There may be functions with which this setting cannot be enabled. See “Camera Settings that Cannot Be Applied Simultaneously” (A 58) for more information. • When the ISO sensitivity setting is set to any option other than Auto, Motion detection (A 146) is disabled. Shooting Options: Shooting Menu (A (Auto) Mode) AF Area Mode A (auto) M F (Shooting menu) M AF area mode Use this option to determine how the camera selects the focus area for autofocus. • When digital zoom is in effect, the camera always focuses at the center of the frame regardless of the specified setting. a 11 Focus area More on Shooting w Face priority (default setting) When the camera recognizes a face, it focuses on that face. See “Face Priority” (A 56) for more information. If more than one face is recognized, the camera focuses on the face closest to the camera. When taking pictures of subjects other than people, or framing a subject with which no face is recognized, the AF area mode setting switches to Auto. When the shutter-release button is pressed halfway, the camera will automatically select the focus area containing the subject closest to the camera. Auto When the shutter-release button is pressed halfway, the camera automatically selects the focus area containing the subject closest to the camera and the selected focus area (up to nine areas) will be displayed in the monitor. No focus area is displayed until the shutter-release button is pressed halfway. 11 Focus areas y Center The focus area is displayed at the center of the frame. When the shutter-release button is pressed halfway, the camera focuses on the subject at the center of the frame. 11 Focus area B Notes on AF Area Mode • Subjects with which autofocus may not perform as expected may be out of focus (A 31). • When the touch shutter (A 34) or touch AF/AE (A 37) function is enabled, the focus area can be selected by tapping the monitor. • When the subject tracking (A 40) function is enabled, the focus area moves to track the subject. • There may be functions with which this setting cannot be enabled. See “Camera Settings that Cannot Be Applied Simultaneously” (A 58) for more information. 55 Shooting Options: Shooting Menu (A (Auto) Mode) Face Priority When the camera is pointed at a human face, face recognition, which the camera automatically recognizes that face and focus on it, starts. The face priority function is activated in the following situations. • AF area mode (A 55) is set to Face priority • In Scene auto selector (A 60), Portrait (A 62), and Night portrait (A 63) scene modes • In smart portrait mode (A 72) 1 Frame a picture. When the camera recognizes a face, that face is framed by a yellow double border. More on Shooting 11 When the camera detects more than one face, operation varies, depending upon the shooting mode, as follows. Shooting mode A (auto) mode (face priority) Scene auto selector, Portrait, Night portrait scene mode Smart portrait mode Faces framed by double border The face closest to the camera * Other faces framed by single border. The face closest to the center of the frame * Other faces framed by single border. Number of faces that can be recognized Up to 12 Up to 3 The camera focuses on the face framed by the double border. To select another face for focusing, tap a face framed by a single border. The border surrounding the selected face will change to a double border. 2 Press the shutter-release button halfway. The camera focuses on the face framed by the double border. The double border will glow green once focus has been locked. When the camera is unable to focus, the double border will blink. Press the shutter-release button halfway again and focus. 1/250 F3.2 Press the shutter-release button the rest of the way down to take a picture. If the camera detects that the face framed by the double border is smiling in smart portrait mode, the Smile timer (A 74) is activated and the shutter is automatically released without the shutter-release button having been pressed. 56 Shooting Options: Shooting Menu (A (Auto) Mode) B Notes on Face Priority More on Shooting • If the camera is unable to recognize any faces when the shutter-release button is pressed halfway with AF area mode set to Face priority, the AF area mode setting automatically switches to Auto. • If no faces are recognized when the shutter-release button is pressed halfway in Portrait or Night portrait scene mode, or smart portrait mode, the camera will focus on the subject at the center of the frame. • The camera may be unable to recognize faces in the following situations: - When faces are partially hidden by sunglasses or otherwise obstructed - When faces take up too much or too little of the frame • When the frame includes more than one face, the faces recognized by the camera and the face on which the camera focuses depend upon a variety of factors, including the direction in which the faces are looking. • In some rare cases, the subject may not be in focus despite the fact that the double border glows green (A 31). Should this occur, try pressing the shutter-release button halfway to refocus several times, or refocus on another subject positioned at the same distance from the camera as the actual portrait subject (A 39). • When pictures in which a face was recognized during shooting are played back in full-frame playback mode or thumbnail playback mode, depending upon the orientation of the recognized face, the pictures may be automatically rotated for playback display except pictures taken with Continuous, BSS, and Multi-shot 16 (A 53). Autofocus Mode A (auto) M F (Shooting menu) M Autofocus mode Choose how the camera focuses. A Single AF (default setting) The camera focuses when the shutter-release button is pressed halfway or the subject on the monitor is tapped (touch shutter, touch AF/AE). B Full-time AF The camera focuses continuously until the shutter-release button is pressed down halfway. Use with moving subjects. The sound of lens drive movement will be heard while the camera focuses. 57 Shooting Options: Shooting Menu (A (Auto) Mode) Camera Settings that Cannot Be Applied Simultaneously Some shooting settings cannot be used with other functions. Restricted function Setting More on Shooting Flash mode Continuous (A 53) Image mode Continuous (A 53) Continuous Self-timer (A 44) ISO sensitivity Continuous (A 53) AF area mode Digital zoom (A 29) Touch shutter (A 31), Touch AF/AE (A 34) Subject tracking (A 37) Electronic VR Motion detection Blink warning Digital zoom D 58 Continuous (A 53) ISO sensitivity (A 54) Subject tracking (A 37) Continuous (A 53) ISO sensitivity (A 54) Continuous (A 53) Continuous (A 53) Description When Continuous, BSS, or Multi-shot 16 is selected, flash is disabled. When Multi-shot 16 is selected, the Image mode setting is fixed at L (image size: 2560 × 1920 pixels). When taking a picture using the self-timer, the continuous setting is fixed to Single. When Multi-shot 16 is selected, the ISO sensitivity setting is automatically specified according to the brightness. When digital zoom is applied, the camera focuses on the subject at the center of the frame. The camera focuses at the area tapped on the monitor. When a subject has not been selected for tracking, or the camera loses the subject, the camera focuses at the center of the frame. When shooting with Continuous, BSS, or Multishot 16 enabled, electronic VR is disabled. When a setting other than Auto is selected for ISO sensitivity, Electronic VR is disabled. When taking a picture using the subject tracking function, Motion detection is disabled. When Multi-shot 16 is selected, Motion detection is not enabled. When an ISO sensitivity setting other than Auto is selected, Motion detection is disabled. When taking a picture using Continuous, BSS, or Multi-shot 16, Blink warning is disabled. When Multi-shot 16 is selected, digital zoom is not available. More Information See “Digital Zoom” (A 148) for more information. Shooting Suited to Scenes (Scene Mode) Camera settings are automatically optimized for the selected subject type. The following scene modes are available. x Scene auto selector b Portrait c Landscape d Sports e Night portrait j Night landscape f Party/indoor g Beach/snow h Sunset i Dusk/dawn k Close-up u Food l Museum m Fireworks show n Copy A Draw o Backlight p Panorama assist Setting a Scene Mode 1 The icon for the last scene mode selected is displayed. The default setting is d (Scene auto selector; A 60). 2 Scene auto selector More on Shooting Press the A button in shooting mode to display the shooting-mode selection menu and tap the scene mode control. Tap the desired scene icon. For more information about features of scene modes, see page 62. Tap u to display the help selection screen. Tap a scene icon to view a description of that scene mode. Beach/snow 3 Frame the subject and take a picture. 1/250 C F3.2 Functions Available in Scene Mode • The touch shutter (A 34) can be enabled. • Touch AF/AE (A 37) can be enabled in some scene modes. • When F is tapped to display the C (scene) menu, the Image mode (A 48) and Exposure comp. (A 52) options can be adjusted. Changes made to these settings apply to all shooting modes (except movie recording). 59 Shooting Suited to Scenes (Scene Mode) Shooting in the Scene Mode Selected by the Camera (Scene Auto Selector) By simply framing a picture, the camera automatically selects the optimum scene mode for simpler shooting. When a picture is framed in x (Scene auto selector) scene mode, the camera automatically selects one of the following scene modes: • Auto (general shooting) • Portrait (A 62) • Night portrait (A 63) • Night landscape (A 65) • Backlight (A 67) More on Shooting 1 Press the A button in shooting mode to display the shooting-mode selection menu and choose x (Scene auto selector) scene mode (A 59). • Landscape (A 62) • Close-up (A 65) Scene auto selector The camera enters scene auto selector scene mode. 2 Frame the subject and take a picture. When the camera automatically selects a scene mode, the shooting mode icon changes to that for the scene mode currently enabled. d: Auto f: Landscape g: Night landscape j: Backlight e: Portrait h: Night portrait i: Close-up 11 Press the shutter-release button halfway to set focus and exposure. When the subject is in focus, the active focus area glows green. Press the shutter-release button the rest of the way down to take the picture. 60 Shooting Suited to Scenes (Scene Mode) B Notes on Scene Auto Selector Scene Mode • Digital zoom is not available. • Depending upon shooting conditions, the camera may not select the desired scene mode. Should this occur, switch to A (auto) mode (A 26) or select the desired scene mode manually (A 59). C Focusing in Scene Auto Selector Scene Mode • When the camera recognizes a human face in scene auto selector scene mode, it focuses on that face. See “Face Priority” (A 56) for more information. • When the shooting mode indicator d or i (close-up) is displayed, the camera automatically selects the focus area (up to nine areas) containing the subject closest to the camera as same as when Auto is selected for AF area mode (A 55). C Functions Available in Scene Auto Selector Scene Mode More on Shooting • The touch shutter (A 34) or touch AF/AE (A 38) can be enabled. • U (auto; default setting) and W (off) flash modes can be specified (A 42). When U (auto) is applied, the camera automatically selects the optimum flash mode for the scene mode it has selected. When W (off) is applied, the flash does not fire, regardless of shooting conditions. • Self-timer (A 44) setting can be applied. • Macro mode is disabled. Macro mode is only enabled when the camera selects Close-up scene mode. • When F is tapped to display the C (scene auto selector) menu, the Image mode (A 48) and Exposure comp. (A 52) setting can be applied. Changes made to these settings apply to all shooting modes (except movie recording). 61 Shooting Suited to Scenes (Scene Mode) Selecting a Scene Mode to Take Pictures (Features) The following icons are used for descriptions in this section: m, flash mode (A 42); n, self-timer (A 44); p, macro mode (A 45). See “Shooting in the Scene Mode Selected by the Camera (Scene Auto Selector)” (A 60) for more information on scene auto selector scene mode. b Portrait More on Shooting Use this mode for portraits. • When the camera recognizes a human face, that face will be framed by a yellow double border (focus area). See “Face Priority” (A 56) for more information. • If more than one face is recognized, the face nearest to the camera will be framed by a yellow double border (focus area) and the other faces will be framed by a single border. Tap the face framed by a single border to change the focus area to that face (A 34, 37). • The camera softens skin tones (in up to three faces) by applying the skin softening function before recording pictures (A 73). • If no faces are recognized, the camera focuses on the subject at the center of the screen by pressing the shutter-release button halfway. • Digital zoom is not available. m V* n Off* p Off p Off * Default setting can be modified. c Landscape Use this mode for vivid landscapes and cityscapes. • Camera focuses at infinity. The focus area or focus indicator (A 30) always glows green when the shutter-release button is pressed halfway. Note, however, that objects in the foreground may not always be in focus. • AF-assist illuminator (A 147) does not light. m W n Off* * Default setting can be modified. 62 Use of a tripod is recommended in scene modes with which O is indicated. Shooting Suited to Scenes (Scene Mode) d Sports W m n p Off Off O e Night portrait More on Shooting Use this mode for dynamic action shots that freeze the action in a single shot and record motion in a series of pictures. • The camera focuses on the subject at the center of the frame and focuses continuously until focus is locked by pressing the shutter-release button halfway. The area focused can be changed by the touch shutter (A 34) or touch AF/AE (A 37). • While the shutter-release button is held down, up to three pictures are taken at a rate of about 0.9 frames per second (fps) when image mode is set to I 4000×3000. • Focus, exposure, and white balance are fixed at the values determined with the first picture in each series. • AF-assist illuminator (A 147) does not light. • The maximum frame rate with continuous shooting may vary depending upon the current image mode setting, the memory card used, or shooting condition. Use this mode for portraits taken at sunset or at night. The flash fires to light the portrait subject while preserving background lighting to achieve a natural balance between the main subject and background ambience. • When the camera recognizes a human face, that face will be framed by a yellow double border (focus area). See “Face Priority” (A 56) for more information. • If more than one face is recognized, the face nearest to the camera will be framed by a yellow double border (focus area) and the other faces by a single border. Tap the face framed by a single border to change the focus area to that face (A 34, 37). • The camera softens skin tones (in up to three faces) by applying the skin softening function before recording pictures (A 73). • If no faces are recognized, the camera focuses on the subject at the center of the screen by pressing the shutter-release button halfway. • Digital zoom is not available. m 1 2 V1 n Off2 p Off Fill flash with slow sync and red-eye reduction. Other settings can be selected. 63 Shooting Suited to Scenes (Scene Mode) f Party/indoor Captures the effects of candlelight and other indoor background lighting. • Camera focuses on subject at the center of the frame. The area focused can be changed by the touch shutter (A 34) or touch AF/AE (A 37). • As pictures are easily affected by camera shake, hold the camera steadily. Use of a tripod is recommended in dark surroundings. m 1 More on Shooting 2 V1 n Off2 p Off Slow sync with red-eye reduction flash mode may be used. The default setting can be modified. Default setting can be modified. g Beach/snow Captures the brightness of such subjects as snowfields, beaches, or sunlit expanses of water. • Camera focuses on subject at the center of the frame. The area focused can be changed by the touch shutter (A 34) or touch AF/AE (A 37). m U* n Off* p Off p Off * Default setting can be modified. O h Sunset Preserves the deep hues seen in sunsets and sunrises. • Camera focuses on subject at the center of the frame. m W* n Off* * Default setting can be modified. 64 Use of a tripod is recommended in scene modes with which O is indicated. Shooting Suited to Scenes (Scene Mode) O i Dusk/dawn Preserves the colors seen in the weak natural light before sunrise or after sunset. • Camera focuses at infinity. The focus area or focus indicator (A 30) always glows green when the shutter-release button is pressed halfway. Note, however, that objects in the foreground may not always be in focus. • AF-assist illuminator (A 147) does not light. m W n Off* p Off p Off * Default setting can be modified. More on Shooting O j Night landscape Slow shutter speeds are used to produce stunning night landscapes. • Camera focuses at infinity. The focus area or focus indicator (A 30) always glows green when the shutter-release button is pressed halfway. Note, however, that objects in the foreground may not always be in focus. • AF-assist illuminator (A 147) does not light. m W n Off* * Default setting can be modified. k Close-up Photograph flowers, insects and other small objects at close range. • The camera focused on the subject at the center of the frame. The area focused can be changed by the touch shutter (A 34) or touch AF/AE (A 37). • Macro mode (A 45) is enabled and the camera automatically zooms to the closest position at which it can focus. • The closest distance at which the camera can focus varies depending on the zoom position. The camera can focus at the shortest distances when F and the zoom indicator glow green with the zoom indicator positioned to the left (wider angle) of G. At the zoom position one step to the right (telephoto) of the maximum wide-angle zoom position, the camera can focus on subjects as close as 8 cm (3.2 in.) to the lens. At the maximum wideangle zoom position and G zoom position, the camera can focus at a distance of 20 cm (8 in.). • The camera focuses continuously until focus is locked by pressing the shutter-release button halfway. • As pictures are easily affected by camera shake, hold the camera steadily. m U* n Off* p On * Default setting can be modified. Note that the flash may be unable to light entire subject at distances of less than 50 cm (1 ft. 8 in.). 65 Shooting Suited to Scenes (Scene Mode) u Food More on Shooting Use when taking pictures of food. • The camera focused on the subject at the center of the frame. The area focused can be changed by the touch shutter (A 34) or touch AF/AE (A 37). • Macro mode (A 45) is enabled and the camera automatically zooms to the closest position at which it can focus. • The closest distance at which the camera can focus varies depending on the zoom position. The camera can focus at the shortest distances when F and the zoom indicator glow green with the zoom indicator positioned to the left (wider angle) of G. At the zoom position one step to the right (telephoto) of the maximum wide-angle zoom position, the camera can focus on subjects as close as 8 cm (3.2 in.) to the lens. At the maximum wideangle zoom position and G zoom position, the camera can focus at a distance of 20 cm (8 in.). • Hue can be adjusted with the slider displayed at bottom in the monitor. Drag the slider to right to make the image more reddish, or left to make it more bluish. The selected hue adjustment setting is stored in the camera’s memory even after the camera is turned off, and reapplied the next time food scene mode is selected. • The camera focuses continuously until focus is locked by 11 pressing the shutter-release button halfway. • As pictures are easily affected by camera shake, hold the camera steadily. m W n Off* p On * Default setting can be modified. l Museum Use indoors where flash photography is prohibited (for example, in museums and art galleries) or in other settings in which you do not want to use the flash. • Camera focuses on subject at the center of the frame. The area focused can be changed by the touch shutter (A 34) or touch AF/AE (A 37). • BSS (best shot selector) can be enabled (A 53). • As pictures are easily affected by camera shake, hold the camera steadily. • AF-assist illuminator (A 147) does not light. m W n Off* p * Default setting can be modified. 66 Use of a tripod is recommended in scene modes with which O is indicated. Off* Shooting Suited to Scenes (Scene Mode) O m Fireworks show Slow shutter speeds are used to capture the expanding burst of light from a firework. • Camera focuses at infinity. The focus indicator (A 30) always glows green when the shutter-release button is pressed halfway. Note, however, that objects in the foreground may not always be in focus. • AF-assist illuminator (A 147) does not light. m W n Off p Off p Off* n Copy m W* n Off* More on Shooting Provides clear pictures of text or drawings on a white board or in print. • Camera focuses on subject at the center of the frame. The area focused can be changed by the touch shutter (A 34) or touch AF/AE (A 37). • Use macro mode (A 45) to focus at short ranges. • Colored text and drawings may not show up well. * Default setting can be modified. A Draw Write a memo or draw a picture on the touch panel display and save it as an image. See “Using the Draw Option” (A 69) for more information. m – n – p – p Off o Backlight Use when light is coming from behind subject, throwing features or details into shadow. The flash fires automatically to “fill in” (illuminate) shadows. • Camera focuses on subject at the center of the frame. The area focused can be changed by the touch shutter (A 34) or touch AF/AE (A 37). m m n Off* * Default setting can be modified. 67 Shooting Suited to Scenes (Scene Mode) p Panorama assist Use when taking a series of pictures that will later be joined to form a single panorama using the supplied Panorama Maker software. See “Shooting for a Panorama” (A 70) for details. m More on Shooting 68 W* n * Default setting can be modified. Off* p Off* Shooting Suited to Scenes (Scene Mode) Using the Draw Option Write a memo, or draw a picture, on the touch panel display and save it as an image. The image is saved at an image size setting of O 640×480. 1 Press the A button in shooting mode to display the shooting-mode selection menu and choose A (Draw) scene mode (A 59). Scene auto selector Write a memo or draw pictures. More on Shooting 2 Tap n to enlarge picture display by 3×, the optimum display size for writing text or drawing pictures. Tap A, D, B, or C to change the portion of the picture in the monitor. Tap o to return to the original display size. Tap I (pen) to write text or draw pictures, and tap J (eraser) to erase text or pictures (A 108). 3 Tap I. Tap J, before tapping I, to undo the last operation applied using the pen or erase tool (up to the last five operations can be undone). 4 Tap Yes. The memo is saved. Save OK? To cancel saving the memo, tap No. Yes No 69 Shooting Suited to Scenes (Scene Mode) Shooting for a Panorama The camera focuses on the subject at the center of the frame. Use a tripod for the best results. 1 Press the A button in shooting mode to display the shooting-mode selection menu and choose p (Panorama assist) scene mode (A 59). Scene auto selector More on Shooting Panorama direction icons are displayed to show the direction in which pictures will be joined. 2 Tap a direction icon. Select the direction in which pictures will be joined in the completed panorama; right (D), left (C), up (A) or down (B). A different direction can be selected by tapping a different panorama direction icon. 11 Apply flash mode (A 42), self-timer (A 44), and macro mode (A 45) settings with this step, if necessary. 3 Take the first picture. One third of the picture will be displayed as translucent. 11 4 Take the next picture. Frame the next picture so that one-third of the frame overlaps the previous picture. Repeat this process until the necessary number of pictures have been taken to complete the scene. 70 10 Shooting Suited to Scenes (Scene Mode) 5 Tap H when shooting is complete. The camera returns to step 2. 7 More on Shooting B Notes on Panorama Assist • Flash mode, self-timer, and macro mode settings cannot be adjusted after the first picture is taken. Pictures cannot be deleted, nor can zoom, Image mode setting (A 48), or Exposure comp. (A 52) be adjusted after the first picture has been taken. • Shooting for the panorama series is terminated if the auto off function (A 149) initiates standby mode during shooting. Setting the time allowed to elapse before the auto off function is enabled to a longer setting is recommended. D R Indicator In Panorama assist scene mode, exposure, white balance, and focus for all pictures in a panorama are fixed at the values for the first picture in each series. When the first picture is taken, R is displayed to indicate that exposure, white balance, and focus are locked. 10 D Panorama Maker Install Panorama Maker from the supplied Software Suite CD. Transfer pictures to a computer (A 126) and use Panorama Maker (A 130) to join them in a single panorama. D More Information See “Image/Sound File and Folder Names” (A 162) for more information. 71 Shooting Smiling Faces (Smart Portrait Mode) At the default settings, the camera uses face priority to recognize human faces, and then automatically releases the shutter when a smile is detected (smile timer). The skin softening option can be used to smooth skin tones of human faces. 1 Press the A button in shooting mode to display the shootingmode selection menu and then tap F. Smart portrait The camera enters smart portrait mode. More on Shooting 2 Frame a picture. Point the camera at the subject. When the camera recognizes a human face, a yellow double border (focus area) is displayed around that face. When focus is acquired on that face, the double border will turn green for a moment and focus is locked. 1/250 F3.2 Up to three faces can be recognized. When the camera detects more than one face, the double border is displayed around the face closest to the center of the frame, and single borders around the others. When a face framed by a single border is tapped, the single border changes to a double border and the camera focuses on that face. 3 The shutter is automatically released. If the camera detects that the face framed by the double border is smiling, Smile timer (A 74) is activated and the shutter is automatically released. When the camera recognizes a face, the self-timer lamp (A 4) blinks. Immediately after the shutter is released, the self-timer lamp flickers. Each time the shutter is released, the camera again initiates face recognition and smile detection operations for continuous automatic shooting. Pictures can also be taken by pressing the shutter release button. The camera can focus on the subject at the center of the frame when faces are not recognized. When the shutter is released, the camera softens the subject’s skin to make it appear smoother and then records the image (Skin softening; A 74). 4 Shooting ends. To stop automatic shooting of smiling faces, either turn the camera off, set Smile timer to Off, or press the A button and select another shooting mode. 72 Shooting Smiling Faces (Smart Portrait Mode) B Notes on Smart Portrait Mode • Digital zoom is not available. • Under some shooting conditions, the camera may be unable to recognize faces or detect smiles. • See “Notes on Face Priority” (A 57) for more information. B Notes on Skin Softening C Auto Power Off in Smile Timer Mode When Smile timer is set to On, the auto power off function (A 149) is activated and the camera turns off when either of the situations indicated below persists and no other operations are performed. • The camera does not recognize any faces. • The camera recognized a face, but cannot detect a smile. C More on Shooting • More time than usual may be required to save a picture when shooting with skin softening function. • In some shooting conditions, facial skin tones may not be smoothed or parts other than face may be modified though the camera recognizes a face. If the desired results are not produced, set Skin softening to Off and shoot again. • The skin softening level cannot be adjusted when the portrait or night portrait is selected in the scene mode. • Skin softening can also be applied on recorded pictures (A 112). Functions Available in Smart Portrait Mode • The touch shutter (A 34) function can be enabled when Smile timer is set to Off. • The touch AF/AE (A 37) function can be enabled. • Flash cannot be used when Blink proof is set to On. When Blink proof is set to Off, flash mode (A 42) is set to U (auto) (can be modified). • The self timer (A 44) options can be applied when Smile timer is set to Off. • Macro mode cannot be used. • Tap F to display F (smart portrait) menu and adjust Image mode, Skin softening, Smile timer, Exposure comp., and Blink proof (A 74). D More Information See “Autofocus” (A 31) for more information. 73 Shooting Smiling Faces (Smart Portrait Mode) Smart Portrait Menu The following options can be applied in the smart portrait menu. Tap F (A 14) in smart portrait mode (A 72) to display the smart portrait menu and tap menu items to adjust settings. Image mode Adjust Image mode (A 48). Changes made to the image mode setting apply to all shooting modes (except movie recording). Skin softening More on Shooting Enable skin softening. When the shutter is released, the camera detects one or more human faces (up to three), and processes the image to soften facial skin tones before saving the picture. The degree of skin softening applied can be selected from High, Normal (default setting), and Low. When Off is selected, the skin softening function is disabled. • The current setting can be confirmed by the indicator displayed in the monitor with shooting (A 11). No indicator is displayed when Off is selected. The effects of skin softening are not visible when framing pictures for shooting. Check the degree of skin softening performed in playback mode. Smile timer • On (default setting): The camera uses face priority to recognize a human face, and then automatically releases the shutter whenever a smile is detected. • Off: The camera does not release the shutter automatically with smile detection. Press the shutter-release button or tap the subject on the monitor to take a picture. • When smile timer is enabled, an indicator is displayed in the monitor with shooting (A 11). No indicator is displayed when Off is selected. Exposure comp. Adjust Exposure comp. (A 52) with shooting in smart portrait mode. Blink proof When On is selected, the camera automatically releases the shutter twice each time a picture is taken. Of the two shots, one in which the subject’s eyes are open is saved. • If the camera saved a picture in which the subject’s eyes may have been closed, the dialog shown at right is displayed for a few seconds. A blink was detected in the • Flash cannot be used when On is selected. picture just taken. • The default setting is Off. • The current setting is displayed in the monitor (A 11). No indicator is displayed when Off is selected. 74 More on Playback Operations in Full-frame Playback Mode Press the c(playback) button to enter playback mode and display pictures that have been taken (A 32). 15/05/2010 15:30 0004.JPG The following operations are available in full-frame playback mode. Option View thumbnails Playback zoom Select a picture Description f (h) Rotate the zoom control to f (h) to display 4, 9 or 16 picture thumbnails. g (i) A B or C 4 A 77 Rotate the zoom control to g (i) to enlarge the picture up to 10×. 79 Tap H to return to full-frame playback mode. Tap A to toggle displayed operation controls and information display on and off. 12 Tap B or C, or drag the picture to display previous or subsequent picture. Drag your finger quickly across half of 32 the monitor or more to skip past the previous or subsequent five pictures. Edit pictures D Tap D to display the retouch menu. Pictures can be added to or removed from albums. 81, 84, 102, 103, 105 Playback movies R Tap R to play back the movie currently displayed. 123 Delete pictures E Tap E to delete the picture currently displayed. 33 Display playback menu F Tap F to display the menu for the selected mode. 93 Switch to another playback mode Press the c button to display the playback-mode selection menu and change to favorite pictures, auto sort, or list by date mode. 80 Switch to shooting mode Press the A button or the shutterrelease button. 32 More on Playback Toggle displayed operation controls and information display on and off Use 4 75 Operations in Full-frame Playback Mode C Viewing Pictures When pictures in which a face was recognized during shooting (A 56) are displayed in full-frame playback mode, depending upon the orientation of the recognized face, the pictures may be automatically rotated for playback display except pictures taken with Continuous, BSS, and Multishot 16 (A 53). More on Playback 76 Viewing Multiple Pictures: Thumbnail Playback Rotate the zoom control to f (h) in full-frame playback mode (A 75) to display pictures in “contact sheets” of thumbnail images. 10 The following operations are available while thumbnails are displayed. To Increase the number of pictures displayed Scroll display Switch to full-frame playback mode Delete pictures Switch to shooting mode C A Description Rotate the zoom control to f (h) to f (h) increase the number of the picture thumbnails displayed: 4 ➝ 9 ➝ 16. g (i) C or D – E Rotate the zoom control to g (i) to decrease – the number of picture thumbnails displayed: 16 ➝ 9 ➝ 4. Rotate the zoom control to g (i) in 4-picture thumbnail display to return to full-frame playback mode. Tap C or D, or tap the slider at the bottom of the screen. – Tap a picture. – More on Playback Decrease the number of pictures displayed Use Tap E to select pictures for deletion. Tap the – pictures to be deleted and tap I. Press the A button or the shutter-release button. 32 Thumbnail Playback Mode Display When pictures marked using Print set (A 94) or Protect (A 100) are selected, the icons shown at right are displayed with them. Movies are displayed as film frames. Protect icon 10 Print set icon Film frames 77 Viewing Multiple Pictures: Thumbnail Playback C Thumbnail Display in Favorite Pictures and Auto Sort Mode • When thumbnails are displayed in favorite pictures mode (A 81), the favorite pictures icon is displayed at right above the thumbnails. • When thumbnails are displayed in auto sort mode (A 88), the pictures’ category icon is displayed at right above the thumbnails. More on Playback 78 2 3 Taking a Closer Look: Playback Zoom Rotating the zoom control to g (i) in full-frame playback mode (A 75) enlarges display of the center portion of the current picture. • The guide displayed at bottom right shows the portion of the image currently displayed. The following operations can be performed while picture display is enlarged. To Zoom in Zoom out Use g (i) A Description Zoom increases each time the zoom control is rotated to g (i), to a maximum of 10×. – Zoom decreases each time the zoom control is rotated to f (h). When the magnification f (h) ratio reaches 1×, the display returns to full-frame – playback mode. – The area of the picture currently displayed can be changed by dragging the picture. – Delete pictures E Tap E to delete the picture. 32 Switch to fullframe playback H Tap H to switch to full-frame playback. 33 Crop picture G Tap G to crop current picture to contain only the portion visible in the monitor. 118 Press the A button or the shutter-release button. 32 Switch to shooting mode More on Playback Change the display area Pictures Taken with Face Priority When zooming in (playback zoom) on a picture taken using the face priority function (A 56) by rotating the zoom control to g (i), the picture will be enlarged with the face recognized with shooting at the center of the monitor (except pictures taken with Continuous, BSS, and Multi-shot 16; A 53). • If more than one face was recognized, the picture will be enlarged with the face on which focus was acquired at the center of the monitor. Tap M or N to display other recognized faces. • When the zoom control is rotated to g (i) or f (h) to adjust the zoom ratio, the center of the picture (normal playback zoom display), rather than the face, is displayed at the center of the monitor. 79 Selecting Playback Mode Select a playback mode from c (playback), h (favorite pictures), F (auto sort), and C (list by date) modes. 1 Press the c button in playback mode. The playbackmode menu is displayed. 2 Tap the desired playback mode control. The camera enters the selected playback mode. To return to the current playback mode without switching playback modes, press the c button. More on Playback 1 c Playback mode 1 2 3 4 Play A 32 Play back all pictures. 2 h Favorite pictures mode A 81 Play back pictures added to an album. 3 F Auto sort mode A 88 Play back pictures and movies automatically sorted to the selected category with shooting. 4 C List by date mode Play back pictures taken on the selected date. 80 A 91 Sorting Favorite Pictures (Favorite Pictures Mode) Pictures can be sorted to albums. Once pictures have been sorted to albums, favorite picture mode can be used to play back only the pictures in a specific album. Adding pictures to albums makes finding a particular picture faster and easier. Pictures can be sorted to albums categorized by themes such as travel or weddings. A single picture can be added to multiple albums. Adding Pictures to Albums Pictures can be added to albums and sorted. 1 Display pictures in playback mode (A 32), auto sort mode (A 88), or list by date mode (A 91). 2 Select a picture and tap D. 15/05/2010 15:30 0004.JPG 4 3 Tap h. The albums selection screen is displayed. 4 Tap the desired album. The picture is added to the album and monitor display returns to full-frame playback mode. Repeat step 1 and 2 to add a picture to multiple albums. 4 More on Playback Display a picture in full-frame playback mode and tap D. The retouch menu is displayed. Retouch Favorite pictures 01 02 03 04 05 06 07 08 09 81 Sorting Favorite Pictures (Favorite Pictures Mode) B Notes on Adding Favorite Pictures • An album can contain up to 200 pictures. • Movies cannot be added to albums. • If the selected picture has already been added to an album, the checkbox for the album to which it has been added will be checked (w). • When pictures are added to albums, they are not physically copied to albums or moved from the folder (A 162) to which they were originally recorded (A 87). D More Information See “Removing Pictures from Albums” (A 84) for more information. More on Playback 82 Sorting Favorite Pictures (Favorite Pictures Mode) Viewing Pictures in an Album Pictures can be displayed by selecting the album to which they were added in “h favorite pictures mode”. • In full-frame playback mode, just as with normal playback mode, pictures can be displayed as thumbnails and picture display can be enlarged. Still pictures can be edited. • When F is tapped in full-frame or thumbnail playback mode to display the favorite pictures menu (A 85), all pictures sorted to the specified album can be selected for deletion, viewing in a slide show, printing, or protection. 1 Press the c button in playback mode to display the playback-mode selection menu and tap h. Favorite pictures A list of albums is displayed. Tap the desired album. The pictures in the selected album will be displayed in full-frame playback mode. More on Playback 2 Favorite pictures 01 02 03 04 05 06 07 08 09 15/05/2010 15:30 0004.JPG The icon for the current album is displayed on the screen. Tap m in full-frame playback mode to return to the album selection screen. 4 4 83 Sorting Favorite Pictures (Favorite Pictures Mode) Removing Pictures from Albums To remove a picture from an album without permanently deleting it, follow the procedures described below. • Select the desired picture in full-frame display in step 2 in favorite pictures mode (A 83), tap D, and tap Retouch h in retouch screen. When h is tapped, the confirmation dialog is displayed. • Tap Yes to remove the picture from the album. To exit without removing the picture, tap No. Remove this picture from favorites? More on Playback Yes B 84 No Note on Deleting Pictures in Favorite Pictures Mode Note that deleting a picture in favorite pictures mode deletes not only the picture from the album, but also deletes the original picture from the internal memory or memory card permanently (A 87). Sorting Favorite Pictures (Favorite Pictures Mode) Using Favorite Pictures Mode The following operations are available in the album list screen. To Use Change album icon A Description Change the icon assigned to an album. 86 E Tap E to display the album selection screen. Select the desired album and tap I to delete all pictures added to that album. – Switch to favorite pictures menu F Tap F to display the favorite pictures menu. 85 Change playback mode Press the c button to display the playbackmode selection menu. 80 Switch to shooting mode Press the A button or the shutter-release button. 32 More on Playback K Delete pictures added to the specified album Favorite Pictures Menu Tap F in favorite pictures mode to apply the following menu options for only pictures in the selected album. Print set Slide show* Delete Protect* ➝A 94 ➝A 97 ➝A 98 ➝A 100 * During full-frame playback only When F is tapped in the album list screen (A 83), the print set option can be applied to all pictures in the specified album, or all pictures in the specified album can be deleted. To apply options to individual pictures or to select individual pictures, for deletion, for example, tap F in full-frame display. 85 Sorting Favorite Pictures (Favorite Pictures Mode) Changing Icons Assigned to Albums The icon assigned to an album can be changed to reflect the theme of pictures included in the album. 1 Press the c button in playback mode to display the playback-mode selection menu and tap h. Favorite pictures A list of albums is displayed. 2 More on Playback 3 Tap K. Tap the desired folder. The album icon and icon color selection screen is displayed. 4 Tap the desired icon and color and tap I. Favorite pictures 01 02 03 04 05 06 07 08 09 Choose icon 01 02 03 04 05 06 07 08 09 Choose icon The icon is modified and the monitor display returns to the list of albums. B 86 Notes on Icons for Albums Choose icons for albums separately for the internal memory and for every memory card used. • To change the icon for an album containing pictures stored in the internal memory, remove the memory card from the camera. • The default setting for icons are black numbers. Sorting Favorite Pictures (Favorite Pictures Mode) C Adding/Viewing Favorite Pictures When pictures are added to albums, they are not physically copied to albums or moved from the folder to which they were originally recorded (A 162). Only the file names of pictures are added to albums. In favorite pictures mode, pictures with file names that have been added to the specified album are played back. Note that deleting a picture (A 33, 85, 98) played back in favorite pictures mode deletes not only the picture from the album, but also deletes the original picture from the internal memory or memory card permanently . Adding Pictures to Albums Album 1 Internal memory/memory card 0001.JPG 0002.JPG 0001.JPG Adds file names 0002.JPG 0003.JPG 0004.JPG Album 2 Adds file names 0001.JPG More on Playback 0003.JPG 0004.JPG Favorites Picture Playback 0001.JPG Album 1 0002.JPG 0001.JPG 0002.JPG 0003.JPG References files Internal memory/ memory card Playback 0003.JPG 87 Image Searching in Auto Sort Mode Pictures and movies are automatically sorted to any of the following categories with shooting. When “F (auto sort) mode” is selected, pictures and movies can be viewed by selecting the category to which they were sorted. Z Smile D Portraits u Food U Landscape V Dusk to dawn D Close-ups D Movie M Retouched copies W Other scenes • In full-frame playback mode, just as with normal playback mode, pictures can be displayed as thumbnails and picture display can be enlarged. Still pictures can be edited and added to albums, and movies can be played back. • When F is tapped, the auto sort menu (A 90) is displayed and all pictures sorted to the specified category can be selected for deletion, viewing in a slide show, or applying print order or protection settings. More on Playback Viewing Pictures in Auto Sort Mode 1 Press the c button in playback mode to display the playback-mode selection menu and tap F. Auto sort A list of categories is displayed. 2 Tap the desired category. Auto sort For more information on categories, see “Auto Sort Mode Categories” (A 89). A picture sorted to the selected category will be displayed in full-frame playback mode. 15/05/2010 15:30 0004.JPG The icon for the category currently selected is displayed at the bottom of the screen. Tap l in full-frame display to return to the list of categories. 88 4 4 Image Searching in Auto Sort Mode Auto Sort Mode Categories Category Description D Portraits Pictures taken in A (auto) mode (A 26) with the face priority. Pictures taken in Portrait*, Night Portrait*, Party/indoor, and Backlight* scene mode (A 59). Pictures taken in smart portrait mode (A 72) with the smile timer setting set to Off. u Food Pictures taken in Food scene mode (A 59). U Landscape Pictures taken in Landscape* scene mode (A 59). V Night landscape Pictures taken in Night landscape*, Sunset, Dusk/dawn, and Fireworks show scene mode (A 59). D Close-ups Pictures taken in A(auto) mode with macro mode (A 45). Pictures taken in Close-up* scene mode (A 59). D Movie Movies (A 119). M Retouched copies Copies created using editing function (A 105). W Other scenes All other pictures that cannot be defined by the categories described above are displayed. More on Playback Z Smile Pictures taken in smart portrait mode (A 72) with the smile timer setting set to On are displayed. * Pictures taken in scene auto selector scene mode (A 60) are also sorted to the appropriate categories. B Notes on Auto Sort Mode • Up to 999 pictures and movie files can be sorted to each category in auto sort mode. If 999 pictures or movies have already been sorted to a specific category, new pictures and movies cannot be sorted to that category or displayed in auto sort mode. Display pictures and movies that could not be sorted to a category in normal playback mode (A 32) or list by date mode (A 91). • Pictures or movies copied from the internal memory to a memory card, or vice versa (A 100), cannot be displayed in auto sort mode. • Pictures or movies recorded by a camera other than the COOLPIX S4000 cannot be displayed in auto sort mode. 89 Image Searching in Auto Sort Mode Using Auto Sort Mode The following operations are available in the category list screen. To Use A Description More on Playback Delete pictures sorted to the specified category E Tap E to display the category selection screen. Select the desired category and tap I to delete – all pictures sorted to that category. View auto sort menu F Tap F to display the auto sort menu. 90 Switch to another playback mode Press the c button to display the playbackmode selection menu. 80 Switch to shooting mode Press the A button or the shutter-release button. 32 Auto Sort Menu Tap F in auto sort mode to apply the following menu options for only the pictures sorted to the specified category. Print set Slide show* Delete Protect* ➝A 94 ➝A 97 ➝A 98 ➝A 100 * During full-frame playback only When F is tapped in the category list screen (A 88), the print set option can be applied to all pictures sorted to the same category, or all pictures sorted to the same category can be deleted. To apply options to individual pictures or to select individual pictures for deletion, for example, tap F in full-frame display. 90 Viewing Pictures by Date (List by Date Mode) In “C list by date mode”, pictures taken on a same date can be played back. • In full-frame playback mode, just as with normal playback mode, picture display can be enlarged, pictures can be displayed in thumbnails, edited, or added to albums, and movies can be played back. • When F is tapped, the list by date menu (A 92) is displayed and all pictures taken on a specified date can be selected for deletion, viewing in a slide show, or applying print order or protection settings. Selecting a Date in List by Date Mode 1 Press the c button in playback mode to display the playback-mode selection menu and tap C. Dates for which pictures exist are listed. Tap the desired date. The camera lists up to 29 dates. If pictures exist for more than 29 dates, all pictures recorded earlier than most recent 29 dates will be combined under Others. The first picture taken on the selected date will be displayed full-frame. List by date 15 05 2010 4 10 05 2010 2 Others 3 More on Playback 2 List by date 15/05/2010 15:30 0004.JPG Tap k in the full-frame display to return to the list by date screen. 1 B 4 Notes on List by Date Mode • Up to 9,000 of the most recently recorded pictures can be displayed in list by date mode. If more pictures are exist, “*” is displayed next to the number of pictures for the date containing the 9001st most recent picture. • Pictures taken before the date and time have been set are recognized as having been taken on January 1, 2010. 91 Viewing Pictures by Date (List by Date Mode) Using List by Date Mode The following operations are available in the list by date screen. To A Use Description C or D Tap C or D or drag the slider displayed at the bottom of the screen. – Delete pictures taken on the specified date E Tap E to display the date selection screen. Select the desired date and tap I to delete all pictures taken on that date. – View list by date menu F Tap F to display the list by date menu. 92 Switch to another playback mode Press the c button to display the playbackmode selection menu. 80 Switch to shooting mode Press the A button or the shutter-release button. 32 Scroll display More on Playback List by Date Menu Tap F in list by date mode to apply the following menu options for only the pictures taken on the specified date. Print set Slide show* Delete Protect* ➝A 94 ➝A 97 ➝A 98 ➝A 100 * During full-frame playback only When F is tapped in the list by date screen (A 91), the print set option can be applied to all pictures taken on the same date, or all pictures taken on the same date can be deleted. To apply options to individual pictures or to select individual pictures for deletion, for example, tap F in full-frame display. 92 Playback Options: The Playback Menu The following options are enabled in the playback menu. A 94 Print set Select pictures to print and the number of copies for each. A 97 Slide show View pictures stored in the internal memory or on a memory card in an automatic slide show. A 98 Delete Delete all or selected pictures. Multiple pictures can be deleted at a time. A 100 Protect Protect selected pictures from accidental deletion. A 100 Copy Copy files between memory card and internal memory. More on Playback Displaying the Playback Menu Press the c button to enter playback mode (A 32). Tap F to display the playback menu. 15/05/2010 15:30 0004.JPG Print set Slide show Delete Protect Copy 4 4 • Tap menu items to adjust settings. • Tap H to exit the playback menu. 93 Playback Options: The Playback Menu Print Set (Creating a DPOF Print Order) c button (Playback mode) M F (Playback menu) M a Print set When printing pictures stored on the memory card using any of the following methods, the Print set option in the playback menu is used to create digital “print orders” for printing on DPOF-compatible devices. • Inserting the memory card into a DPOF-compatible (A 177) printer’s card slot • Taking the memory card to a digital photo lab • Connecting the camera to a PictBridge-compatible (A 177) printer (A 132). A print order can also be created for pictures stored in the internal memory if the memory card is removed from the camera 1 Tap F in playback mode. More on Playback The playback menu is displayed. 15/05/2010 15:30 0004.JPG 4 2 Tap Print set. Proceed to step 4 when playing back with favorite pictures mode, auto sort mode, or list by date mode. Print set Slide show Delete Protect Copy 3 Tap Select images. Print set Select images 94 4 Delete print set Playback Options: The Playback Menu 4 Choose pictures (up to 99) and the number of copies (up to nine) of each. Print selection 1 Tap the desired picture and tap U or V to specify the number of copies to be printed. 1 5 1 1 Pictures selected for printing can be recognized by the check mark (y) icon and the numeral indicating the number of copies to be printed. If no copies have been specified for pictures, the selection is canceled. Tap Q or rotate the zoom control to g (i) to switch to full-frame playback. Tap B or rotate the zoom control to f (h) to switch back to 6-thumbnail display. Tap I when setting is complete. 5 Choose whether or not to print shooting date and photo information. Print set Date More on Playback Tap Date to print the shooting date on all pictures in the print order. Info Tap Info to print photo information (shutter speed and aperture) on all pictures in the print order. Tap I to complete the print order and exit. Pictures selected for printing are recognized by the w icon displayed with playback. 15/05/2010 15:30 0004.JPG 4 B 4 Notes on Printing Shooting Date and Photo Information When the Date and Info options are enabled in the print set option, shooting date and photo information are printed on pictures when a DPOF-compatible printer (A 177) that supports printing of shooting date and photo information is used. • Photo information cannot be printed when the camera is connected directly to a printer, via the supplied USB cable, for DPOF printing (A 137). • Note that Date and Info settings are reset when the print set option is displayed. • The date printed is that recorded when the picture was taken. Changing the camera’s date using the Date option in the setup menu after a picture has been taken has no affect on the date printed on the picture. 15.05.2010 95 Playback Options: The Playback Menu B Notes on Print Set When a print order is created in favorite pictures mode, auto sort mode, or list by date mode, the screen shown below is displayed if pictures other than those in the selected album or category, or taken on the selected shooting date, have been marked for printing. • Select Yes to add pictures in the selected album or category, or taken on the selected shooting date, to the existing print order. • Select No to remove print marking from previously marked pictures and restrict the print order to pictures in the selected album or category, or taken on the selected shooting date. Print set Print set Save print marking for other images? Yes No More on Playback Favorite pictures mode/ auto sort mode Save print marking for other dates? Yes No List by date mode If the total number of the pictures in a print order exceeds 99, the screen shown below will be displayed. • Select Yes to remove pictures previously added from the print order and restrict the print order to pictures just marked. • Select Cancel to remove the pictures just added from the print order and restrict the print order to pictures previously marked. Print set Print set Too many images selected. Remove print marking from other images? Yes Cancel Favorite pictures mode/ auto sort mode C Too many images selected. Remove print marking for other dates? Yes Cancel List by date mode Canceling Existing Print Order Tap Delete print set in step 3 of ”Print Set (Creating a DPOF Print Order)” (A 94) to remove print marking from all pictures and cancel the print order. D 96 Date Imprint When date and time of recording are imprinted on pictures using the Date imprint option (A 144) in the setup menu, pictures are recorded with shooting date and time imprinted on the picture when they are taken. Pictures with the date imprinted on them can be printed from printers that do not support printing of the date on pictures. Only the date and time imprinted on pictures with the date imprint option will be printed, even if the Print set date option is enabled. Playback Options: The Playback Menu Slide Show c button (Playback mode) M F (Playback menu) M b Slide show Play back pictures stored in the internal memory or on a memory card one by one in an automated “slide show.” 1 Tap Start. To change the interval between pictures, tap Frame intvl and select the desired interval before tapping Start. Slide show To repeat the slide show automatically, tap Loop before choosing Start. A check mark (w) will be added to the loop option when enabled. 2 Start Frame intvl Loop The slide show begins. More on Playback Tap the monitor to display operation controls and A to hide them. Tap a control to perform the corresponding operation. The following operations are available. To Use Description Rewind O Touch and hold O to rewind. Advance P Touch and hold P to advance. Pause playback. The following operations can be performed while playback is paused using the controls displayed at right in the monitor. Pause End B Q S U Rewind slide show back one frame. Touch and hold U for continuous frame-by-frame rewind. V Advance slide show forward one frame. Touch and hold V for continuous frame-by-frame advance. R Resume playback. End playback and return to the playback menu. Notes on Slide Show • Only the first frame of movies included in slide shows is displayed. • Even when Loop is selected, the slide show will only be played for a maximum of 30 minutes (A 149). 97 Playback Options: The Playback Menu Delete (Deleting Multiple Pictures) c button (Playback mode) M F (Playback menu) M c Delete Delete selected pictures or all pictures. Select images Select pictures from the picture selection screen and delete them. See “Selecting Pictures” (A 99) for more information. Erase all images Delete all pictures. In favorite pictures, auto sort, or list by date mode, all pictures in the selected album or category, or taken on the selected date currently played back are deleted. More on Playback B 98 Notes on Deletion • Once deleted, pictures cannot be recovered. Transfer important pictures to a computer before deleting them. • Pictures marked with the s icon are protected and cannot be deleted (A 100). Playback Options: The Playback Menu Selecting Pictures The picture selection screen like that shown at right is Erase selected images displayed with the following menu selections: 5 • Playback menu: Print set>Select images (A 94), Delete>Select images (A 98), Protect (A 100), and Copy>Selected images (A 100) • Setup menu: Welcome screen >Select an image (A 140) 5 Follow the procedures described below to choose pictures. 1 Tap the desired picture to select and tap again to deselect. Only one picture can be selected for Welcome screen. Erase selected images 1 5 When picture is selected, a check mark (y) is displayed in the top left corner of the picture. More on Playback Tap Q or rotate the zoom control to g (i) to switch to full-frame playback. Tap B or rotate the zoom control to f (h) to switch back to 6-thumbnail display. When selecting pictures for Print set, tap U or V to specify the number of copies for each. 2 Tap I to apply picture selection. When Select images is selected, a confirmation dialog is displayed. Follow the instructions displayed in the monitor. 99 Playback Options: The Playback Menu Protect c button (Playback mode) M F (Playback menu) M d Protect Protect selected pictures from accidental deletion. Tap pictures to protect or cancel protection for previously protected pictures from the picture selection screen. See “Selecting Pictures” (A 99) for more information. Note that formatting the camera’s internal memory or the memory card will permanently delete protected files (A 150). Protected pictures are recognized by the s icon (A 13, 77). Copy (Copy Between Internal Memory and Memory Card) More on Playback c button (Playback mode) M F (Playback menu) M h Copy Copy pictures between the internal memory and a memory card. 1 Tap the desired option from the copy screen. Copy q: Copy pictures from internal memory to memory card. r: Copy pictures from memory card to internal memory. 2 Tap the desired copy option. Selected images: Copy pictures selected from the picture selection screen (A 99). All images: Copy all pictures. 100 Camera to card Selected images All images Playback Options: The Playback Menu B Notes on Copying Pictures • JPEG-, AVI-, and WAV-format files can be copied. Files recorded in any other format cannot be copied. • If voice memos (A 103) are attached to pictures selected for copying, voice memos are copied with the pictures. • Operation is not guaranteed with pictures taken with another make of camera or that have been modified on a computer. • When copying pictures selected for a Print set (A 94), the print set marking is not copied. However, Protect (A 100) settings are copied with pictures. • Pictures or movies copied from the internal memory to a memory card, or vice versa, cannot be displayed in auto sort mode (A 88). • When pictures added to albums (A 81) are copied, the copies are not automatically added to the same albums as the original pictures. C “Memory contains no images.” Message D More Information See “Image/Sound File and Folder Names” (A 162) for more information. More on Playback If there are no pictures stored on a memory card inserted in the camera when playback mode is applied, the message Memory contains no images. will be displayed. Tap F to display the copy option screen, and copy the pictures stored in the camera’s internal memory to the memory card. 101 Rotate Image Specify the orientation in which recorded pictures are displayed with playback. Still pictures can be rotated 90 degrees clockwise or 90 degrees counterclockwise. Pictures that were recorded in portrait (“tall”) orientation can be rotated up to 180 degrees in either direction. 1 Select a picture in the full-frame playback mode (A 75) and tap D. 15/05/2010 15:30 0004.JPG The retouch menu is displayed. 4 2 Tap f. The rotate image screen is displayed. More on Playback 3 4 Retouch Tap I or J. I Rotate 90 degrees counterclockwise J Rotate 90 degrees clockwise The picture rotates 90 degrees. Tap I to finalize display orientation and save the orientation information with the picture. Tap H to return to full-frame playback mode. 102 Voice Memos: Recording and Playback Use the camera’s built-in microphone to record voice memos for pictures. Recording Voice Memos 1 Select the desired picture from full-frame playback mode (A 75) and tap D. 15/05/2010 15:30 0004.JPG The retouch menu is displayed. 4 2 Tap E. The screen for recording voice memos is displayed. Retouch More on Playback 3 4 Tap W to record a voice memo. Recording ends after about 20 seconds. Do not touch the built-in microphone during recording. During recording, o blinks in the monitor. Recording ends when S is tapped during recording. 20s When recording ends, the voice memo playback screen is displayed. Follow the instructions in step 3 of “Playing Voice Memos” (A 104) to play the voice memo. Tap H to return to full-frame playback mode. 15s D More Information See “Image/Sound File and Folder Names” (A 162) for more information. 103 Voice Memos: Recording and Playback Playing Voice Memos Pictures for which voice memos have been recorded are indicated by p in fullframe playback mode. 1 Select the desired picture from full-frame playback mode (A 75) and tap D. 15/05/2010 15:30 0004.JPG The retouch menu is displayed. 4 2 Tap E. The voice memo playback screen is displayed. More on Playback 3 4 Retouch Tap R to play the voice memo. Tap S to stop playback. Tap X during playback to adjust playback volume. w blinks during playback. Tap H to return to full-frame playback mode. 6s Deleting Voice Memos Tap E in step 3 of ”Playing Voice Memos”. Tap Yes to delete only the voice memo. File will be deleted. OK? Yes B 104 No Notes on Voice Memos • When a picture with a voice memo attached is deleted, both the picture and its voice memo are deleted. • If a voice memo already exists for the current picture, it must be deleted before a new voice memo can be recorded. • The COOLPIX S4000 is not able to record a voice memo for pictures taken with another make or model of digital camera. Editing Pictures Editing Functions Use the COOLPIX S4000 to edit pictures in-camera and store them as separate files (A 162). The editing functions described below are available. Editing function Paint (A 107) Quick retouch (A 110) D-Lighting (A 111) Skin softening (A 112) Description Draw on pictures, or add decorations, to pictures. Easily create retouched copies in which contrast and saturation have been enhanced. Create a copy of the current picture with enhanced brightness and contrast, brightening dark portions of the picture. Make facial skin tones softer. Stretch the current picture horizontally to make the subject appear thinner or wider. Adjust the perspective of pictures taken in landscape orientation. Perspective control Apply perspective control similar to that available with shift (A 115) lenses. This option is suited to pictures of buildings or architecture. Create a small copy of pictures suitable for use as e-mail Small picture (A 116) attachments. Color options Make colors more vivid or record pictures in monochrome. (A 117) Crop a portion of the picture. Use to zoom in on a subject or Crop (A 118) arrange a composition. Stretch (A 114) B Editing Pictures See page 102 for the rotate image function and page 103 for the voice memo function for more information. Notes on Picture Editing • Pictures taken at an Image mode setting (A 48) of P 3968×2232 cannot be edited. • The editing functions of this camera cannot be used for pictures taken with another make or model of digital cameras. • If no face is recognized in a picture, a copy cannot be created using the skin softening function (A 112). • Edited copies created with this camera may not be displayed properly on a different model of digital camera. It may also be impossible to transfer them to a computer using a different model of digital camera. • Editing functions are not available when there is not enough free space in the internal memory or on the memory card to store the edited copies. 105 Editing Functions C Restrictions on Picture Editing When an edited copy is further modified with another editing function, check the following restrictions. Editing function used Paint Quick retouch D-Lighting Color options Stretch Perspective control Editing function to add The paint, small picture, or crop function can be added. Skin softening Small picture The editing functions other than the skin softening can be added. Another editing function cannot be added. Another editing function cannot be added. However, the paint function can be applied to cropped copies saved at an image size of 640 × 480 pixels or larger. Crop The paint, small picture, skin softening, or crop functions can be added. Editing Pictures • Copies created with editing functions other than the paint function cannot be further edited with the same function used to create them. • When combining the small picture or crop function and another editing function, use the small picture and crop functions after other editing functions have been applied. • The skin softening function can be added to the picture taken with skin softening (A 74). • Images created in draw scene mode (A 69) can only be edited with the paint, small picture, or crop function. D Original and Edited Pictures • Copies created with editing functions are not deleted if the original pictures are deleted. The original pictures are not deleted if copies created with editing functions are deleted. • Edited copies are stored with the same recording date and time as the original. • Print marking (A 94) and protect settings (A 100) do not remain effective in edited copies. 106 Picture Editing U Paint: Painting Pictures Draw on pictures or decorate them. Shooting date decoration can also be added. Painted copies are stored as separate files. 1 Select the desired picture in full-frame playback mode (A 75) and tap D. 15/05/2010 15:30 0004.JPG The retouch menu is displayed. 4 2 4 Tap d. Retouch Use the I, J, K, and L tools to paint pictures. Undo For more information about using each tool, see “Write and Draw on Pictures” (A 108). Tap n to enlarge picture display by 3×, the optimum display size for painting pictures. Tap A, D, B, or C to change the portion of the picture in the monitor. Tap o to return to the original display size. Tap J to undo the last operation applied using the pen, eraser, or decoration tool (up to the last five operations can be undone). 4 Editing Pictures 3 Frame Decoration Eraser Pen Tap I. 107 Picture Editing 5 Tap Yes. A new, decorated copy is created. Save OK? To exit without saving the copy, tap No. Yes 6 No Choose a size. Choose a copy size from 3 M (2048 × 1536) or TV (640 × 480). Choose a size When pictures taken at an Image mode setting (A 48) of N 1024×768 or O 640×480 are edited, or cropped 3M copies saved at a size with a pixel count less than three million pixels are further modified using the paint function, copies are automatically saved at a size of TV (640 × 480). TV Painted copies can be recognized by the d icon displayed during playback. Editing Pictures Using the Paint Tools Write and Draw on Pictures Tap I to write or draw on pictures. • Tap the thickness control to choose the weight of pen strokes. • Tap the color control to choose a color. Erase Paint Tool Additions Tap J to erase additions to pictures using the paint or decoration tool. • Tap the eraser’s size control to choose the size of the eraser. 108 Pen’s color Pen’s thickness Eraser’s size Picture Editing Add Decorations Tap K to add a decoration. • Tap the decoration type control to choose one of 14 decorations. • Tap the decoration size control to choose the size of the decoration. When f is selected for the decoration type, f (day, month, year) and S (day, month, year, time) options are available. Decoration type Decoration size Add a Frame Tap L to add a frame around the picture. • Tap B or C to display seven different frames one at a time. Tap I to select a frame. Editing Pictures B Notes on Shooting Date Decoration • When the shooting date decoration is added to pictures taken at an Image mode setting (A 48) of O 640×480, the shooting date may be difficult to read. Set Image mode to N 1024×768 or larger with shooting and select 3 M to save the picture with the shooting date decoration. • The date added with the shooting date decoration uses the format selected in the setup menu’s Date item (A 141). • The date and time added with the shooting date decoration are the date and time at which the picture was taken. These cannot be changed. D More Information See “Image/Sound File and Folder Names” (A 162) for more information. 109 Picture Editing k Quick Retouch: Enhancing Contrast and Saturation Quick retouch can be used to easily create retouched copies in which contrast and saturation have been enhanced. Copies created with the quick retouch function are stored as separate files. 1 Select the desired picture in full-frame playback mode (A 75) and tap D. 15/05/2010 15:30 0004.JPG The retouch menu is displayed. 4 2 4 Tap k. The screen for selecting the degree of enhancement is displayed. Editing Pictures 3 Choose the degree of enhancement performed and tap I. 4 Tap Yes. Retouch A new retouched copy is created. Save OK? To exit without saving the copy, tap No. Copies created with the quick retouch option can be recognized by the a icon displayed in playback mode. D 110 More Information See “Image/Sound File and Folder Names” (A 162) for more information. Yes No Picture Editing I D-Lighting: Enhancing Brightness and Contrast D-Lighting can be used to create copies with enhanced brightness and contrast, brightening dark portions of a picture. New copies are stored as separate files. 1 Select the desired picture in full-frame playback mode (A 75) and tap D. 15/05/2010 15:30 0004.JPG The retouch menu is displayed. 4 2 4 Tap I. The original version will be shown on the left and the edited version will be shown on the right. Tap I. 4 Tap Yes. Editing Pictures 3 Retouch D-Lighting A new, edited copy is created. Save OK? To exit without saving the copy, tap No. Copies created with the D-Lighting function can be recognized by the c icon displayed in playback mode. D Yes No More Information See “Image/Sound File and Folder Names” (A 162) for more information. 111 Picture Editing e Skin Softening: Softening Skin Tones The camera detects faces in pictures and creates a copy with softer facial skin tones. Copies created with the skin softening function are stored as separate files. 1 Select the desired picture in full-frame playback mode (A 75) and tap D. 15/05/2010 15:30 0004.JPG The retouch menu is displayed. 4 2 Tap e. The display for selecting the degree of enhancement to be performed is shown. Retouch If no faces are recognized in the picture, an alert is displayed and the camera returns to full-frame playback mode. Editing Pictures 3 Select the degree of enhancement and tap I. The confirmation screen is displayed with the face to which skin softening was applied enlarged at the center of the monitor. To exit without saving the copy, tap H. 4 Check the enhancement performance. Skin tones in up to 12 faces, in the order of that closest to the center of the frame, are softened. If more than one face was softened, tap M or N to display a different face. To change the degree of effect, tap H to return to step 3. Tap I to display the confirmation dialog for saving the new copy. 112 Preview 4 Picture Editing 5 Tap Yes. A edited copy with the skin softening function is created. Save OK? To exit without saving the copy, tap No. Copies created with the skin softening function can be recognized by the g indicator displayed in playback mode. Yes No Editing Pictures B Note on Skin Softening Depending upon the direction in which faces are looking, or the brightness of faces, the camera may be unable to accurately recognize faces, or the skin softening function may not perform as expected. D More Information See “Image/Sound File and Folder Names” (A 162) for more information. 113 Picture Editing P Stretch: Stretching Pictures Stretch pictures horizontally. Stretched copies are stored as separate files. 1 Select the desired picture in full-frame playback mode (A 75) and tap D. 15/05/2010 15:30 0004.JPG The retouch menu is displayed. 4 2 4 Tap P. Retouch Editing Pictures 3 Tap q or r, or tap the slider at the bottom of the screen to adjust stretch effect. 4 Tap I. 5 Tap Yes. A new, stretched copy is created. Save OK? To exit without saving the copy, tap No. Stretched copies can be recognized by the P icon displayed in playback mode. D 114 More Information See “Image/Sound File and Folder Names” (A 162) for more information. Yes No Picture Editing O Perspective Control: Adjusting a Sense of Perspective Adjust the sense of perspective in the picture taken in landscape orientation. Copies created with the perspective control function are stored as separate files. 1 Select the desired picture in full-frame playback mode (A 75) and tap D. 15/05/2010 15:30 0004.JPG The retouch menu is displayed. 4 2 4 Tap O. Retouch Tap y or z, or tap the slider at the bottom of the screen to adjust perspective control. 4 Tap I. 5 Tap Yes. Editing Pictures 3 A new, edited copy is created. Save OK? To exit without saving the copy, tap No. Copies created using the perspective control function can be recognized by the O icon displayed in playback mode. D Yes No More Information See “Image/Sound File and Folder Names” (A 162) for more information. 115 Picture Editing g Small Picture: Resizing Pictures Create a small copy of the current picture. This feature is useful for creating copies for display on Web pages or e-mail attachments. Small copies are stored as JPEG files with a compression ratio of 1:16. The l 640×480, m 320×240, and n 160×120 size are available. 1 Select the desired picture in full-frame playback mode (A 75) and tap D. 15/05/2010 15:30 0004.JPG The retouch menu is displayed. 4 2 4 Tap g. Retouch Editing Pictures 3 Tap the desired small copy size control and tap I. 640 480 4 Tap Yes. A new, small copy is created. To exit without saving the copy, tap No. Create small picture file? The copy is displayed with a gray frame. Yes D 116 More Information See “Image/Sound File and Folder Names” (A 162) for more information. No Picture Editing F Color Options: Modifying Color Tones Modify color tones. Copies created with which color tone has been modified are stored as separate files. Options o Vivid color p Black-and-white q Sepia r Cyanotype 1 Description Use to achieve a vivid, “photo print” effect. Record black-and-white copies. Record copies with sepia tones. Record cyan-blue monochrome copies. Select the desired picture in full-frame playback mode (A 75) and tap D. 15/05/2010 15:30 0004.JPG The retouch menu is displayed. 4 Tap F. Editing Pictures 2 4 Retouch 3 Tap the desired color option control and tap I. Vivid color 4 Tap Yes. A new copy with modified color tones is created. To exit without saving the copy, tap No. Save OK? Copies created using color options can be recognized by the b icon displayed in playback mode. Yes D No More Information See “Image/Sound File and Folder Names” (A 162) for more information. 117 Picture Editing o Crop: Creating a Cropped Copy Create a copy containing only the portion visible in the monitor when G is displayed with playback zoom (A 79) enabled. Cropped copies are stored as separate files. 1 Rotate the zoom control to g (i) in full-frame playback mode (A 75) to zoom in on the image. To crop a picture displayed in “tall” (portrait) orientation, zoom in on the picture until the black bars displayed on the both sides of the monitor disappear. The cropped picture will be displayed in landscape orientation. To crop the picture in its current “tall” (portrait) orientation, first rotate the picture (A 102) so that it is displayed in landscape orientation. Next, enlarge the picture for cropping, crop the picture, and then rotate the cropped picture back to “tall” (portrait) orientation. 2 Refine copy composition. Editing Pictures Rotate the zoom control to g (i) or f (h) to adjust the zoom ratio. Drag the picture so that only the portion to be copied is visible in the monitor. 3 Tap G. 4 Tap Yes. A cropped copy is created. To exit without saving the copy, tap No. Save this image as displayed? Yes C No Image Size As the area to be saved is reduced, the image size (pixels) of the cropped copy is also reduced. When the size of the cropped copy is 320 × 240 or 160 × 120, a gray frame is displayed around the picture, and the small picture icon l or m is displayed on the left of the screen in full-frame playback mode. D 118 More Information See “Image/Sound File and Folder Names” (A 162) for more information. Movie Recording and Playback Recording Movies To shoot movies with sound recorded via the built-in microphone, select shooting mode and follow the steps below. 1 Press the A button in shooting mode to display the shooting-mode selection menu and tap D. The maximum movie length that can be Movie recorded is displayed in the monitor (A 121). The maximum recording time for a single movie is 29 minutes. The maximum file size for a single movie is 2 GB, even when there is sufficient free space on the memory card for a larger movie file. 2 Press the shutter-release button all the way down to start recording. Camera focuses on the subject at the center of the frame. When Movie options (A 121) is set to N HD 720p (default setting), movies are recorded with the area indicated at right with an aspect ratio of 16:9. 10s To end recording, press the shutter-release button all the way down again. Movie recording can also be initiated or stopped by tapping the monitor. Recording stops automatically when the maximum movie length has been recorded. Movie Recording and Playback The approximate remaining movie length is displayed. 119 Recording Movies B Recording Movies • Memory cards with an SD Speed Class rating of 6 or faster are recommended when recording movies (A 161). Movie recording may stop unexpectedly when memory cards with a lower Speed Class ratings are used. • Optical zoom ratio cannot be adjusted once movie recording begins. Digital zoom cannot be applied before movie recording begins. However, digital zoom can be applied (up to 2×) while movies are being recorded. • There may be some degradation in image quality when digital zoom is used. • The angle of view (recordable area) with movie recording is narrower than with shooting of still pictures. • The sounds of zoom control operation or autofocus lens drive movement may be recorded. • Smear (A 159) visible in the monitor with movie recording will be recorded with movies. Avoiding bright objects such as the sun, reflections of the sun, and electric lights when recording movies is recommended. B Note on Saving Movies After a movie has been recorded, it is not fully saved to the internal memory or memory card until monitor display returns to the shooting display. Do not open the battery-chamber/memory card slot cover before movies have been fully saved. Removing the memory card while movies are being saved could result in loss of data or in damage to the camera or card. B Movie Recording and Playback 120 Note on Autofocus When Single AF (default setting) is selected for Autofocus mode in the movie menu, focus locks when the shutter-release button is pressed (A 122). C Functions Available with Movie Recording • Movie recording can be initiated or stopped by tapping the monitor (touch shutter). Tap w to turn the touch shutter o (default setting) or k. • Macro mode (A 45) is available. Confirm settings before starting movie recording. The flash (A 42) and self-timer (A 44) cannot be used. • Tap F to display the D (movie) menu and Movie options, Autofocus mode, and Electronic VR can be enabled (A 121). Recording Movies Movie Menu The movie menu can be used to adjust Movie options (A 121), Autofocus mode (A 122), and Electronic VR (A 122) settings. Switch to D (movie) shooting mode and tap F (A 14) to display the movie menu. Tap menu items to adjust settings. Movie Options D (Movie) M F (Movie menu) M Movie options The movie menu offers the options shown below. Option Image size and frame rate Movies with an aspect ratio of 16:9 are recorded. This option is suited to playback on a wide screen TV. Image size: 1280 × 720 pixels Frame rate: 24 frames per second I TV movie 640 Image size: 640 × 480 pixels Frame rate: 30 frames per second S Small size 320 Image size: 320 × 240 pixels Frame rate: 30 frames per second C Movie Options and Maximum Movie Length Option N HD 720p (default setting) Internal memory (approx.45 MB) Memory card * (4 GB) 18 s 28 min 50 s I TV movie 640 30 s 46 min S Small size 320 1 min 49 s 2 h 45 min Movie Recording and Playback N HD 720p (default setting) All figures are approximate. The maximum recording time may vary by make of memory card. * The maximum recording time for a single movie is 29 minutes. The maximum file size for a single movie is 2 GB, even when there is sufficient free space on the memory card for a larger movie file. The maximum movie length that can be recorded for a single movie is displayed during recording. D More Information See “Image/Sound File and Folder Names” (A 162) for more information. 121 Recording Movies Autofocus Mode D (Movie) M F (Movie menu) M Autofocus mode Choose how the camera focuses with recording movies. Option Description A Single AF (default setting) Focus is locked when the shutter-release button is pressed. B Full-time AF Camera focuses continuously during movie recording. To prevent sound of camera focusing from interfering with recording, use of Single AF is recommended. Electronic VR D (Movie) M F (Movie menu) M Electronic VR Movie Recording and Playback 122 Choose whether to use electronic VR (vibration reduction) when shooting movies. This option can be enabled when Movie options (A 121) is set to I TV movie 640 or S Small size 320. When N HD 720p (default setting) is selected, the vibration reduction function is disabled and Electronic VR is locked at Off. Option Description On Reduce the effects of camera shake in all movie modes. Off (default setting) Disable electronic VR. When electronic VR is enabled, its icon is displayed in the monitor (A 11). Movie Playback In full-frame playback mode (A 75), movies are recognized by the movie options icon (A 121). Tap R to play a movie. 15/05/2010 15:30 0 0 1 0 . AV I 17s Tap the volume control during playback to display the volume setting control, and adjust playback volume. Playback controls are displayed at right in the monitor. Tap a playback control to perform the corresponding operation. The operations described below are available. Tap A to change the information displayed in the monitor (A 12). Volume control 9s During playback To Use Rewind O Touch and hold O to rewind movie. Description Advance P Touch and hold P to advance movie. Pause End Q S U Tap U to rewind movie one frame. Touch and hold U for continuous rewinding. V Tap V to advance movie one frame. Touch and hold V for continuous advancing. R Resume playback. Tap S to end movie playback and return to full-frame playback mode. Movie Recording and Playback Pause playback. The following operations can be performed while playback is paused using the controls displayed at right in the monitor. Deleting Movie Select a movie in full-frame playback mode (A 75) and tap E. A confirmation dialog is displayed. Tap Yes to delete the movie, or tap No to return to the normal playback display without deleting the movie. B Erase 1 image? Yes No Movie Playback Movies recorded by a camera other than the COOLPIX S4000 cannot be played back. 123 Connecting to Televisions, Computers and Printers Connecting to a TV Connect the camera to a television using the supplied audio/video cable to play back pictures full-frame or in a slide show, or to play back movies, on a television. Connecting to Televisions, Computers and Printers 1 Turn off the camera. 2 Connect the camera to the TV using the supplied audio/video cable. Connect the yellow plug to the video-in jack and the white plug to the audio-in jack on the TV. Yellow 3 Tune the television to the video channel. See the documentation provided with your television for details. 4 Hold down the c button to turn on the camera. The camera enters playback mode and pictures are displayed on the television. The camera monitor turns off when pictures are displayed on the television. See “Operations with TV Connection” (A 125) for more information. 124 White Connecting to a TV Operations with TV Connection B Connecting to Televisions, Computers and Printers While pictures are displayed full-frame on the TV, the previous or subsequent picture can be viewed by dragging your finger across the camera monitor. If the first frame of a movie is displayed, the movie can be played back by tapping the camera monitor. • Tap the camera monitor to turn TV display off and display the picture in the camera monitor. When pictures are displayed in the camera monitor, tap the controls displayed to operate the camera. • When the camera is connected to a TV, pictures cannot be displayed as thumbnails, picture display cannot be enlarged (playback zoom), and pictures cannot be cropped. • Pictures will be automatically displayed on the TV in the following situations. - No operations are performed for a few seconds. - A slide show is played back. - A movie is played back. Connecting the Audio/Video Cable When connecting the audio/video cable, be sure that the camera connector is properly oriented. Do not use force when connecting the audio/video cable to the camera. When disconnecting the audio/video cable, do not pull the connector at an angle. B Video Mode Be sure that the camera’s video mode setting conforms to the standard used by your television. The video mode setting is specified from the Video mode (A 151) option in the setup menu (A 138). 125 Connecting to a Computer Use the supplied USB cable to connect the camera to a computer, and copy (transfer) pictures to a computer with the supplied Nikon Transfer software. Before Connecting the Camera Connecting to Televisions, Computers and Printers Install the Software Before connecting the camera to a computer, software, including Nikon Transfer, ViewNX for displaying transferred pictures, and Panorama Maker for creating panorama photos, must be installed using the supplied Software Suite CD. For more information on installing the software, refer to the Quick Start Guide. Compatible Operating Systems Windows • Windows 7 (Home Basic/Home Premium/Professional/Enterprise/Ultimate editions) • Windows Vista Service Pack 2 (Home Basic/Home Premium/Business/ Enterprise/Ultimate editions) • 32-bit versions of Windows XP Service Pack 3 (Home Edition/Professional) Macintosh Mac OS X (version 10.4.11, 10.5.8, 10.6) Refer to the Nikon website for the latest information on operating system compatibility. B Note on Computer Connection Disconnect other USB devices such as commercial USB chargers from the computer. Simultaneous connection of the camera and other USB devices to the computer could result in operation malfunction or excessive supply of power to the camera, causing damage to the camera or memory card. Refer to the documentation supplied with other USB devices for more information. B 126 Notes on Power Source • When connecting the camera to a computer to transfer pictures, use a fully charged battery to prevent the camera from turning off unexpectedly. • When the camera is connected to a computer via the supplied USB cable with Auto (default setting) selected for the Charge by computer option in the setup menu, the battery inserted into the camera is automatically charged using power supplied by the computer (A 131, 152). Pictures can be transferred while the battery is charging. • If the AC Adapter EH-62D (A 160) (available separately) is used, COOLPIX S4000 can be powered from an electrical outlet. Do not use any other make or model of AC adapter as they may cause the camera to overheat or malfunction. Connecting to a Computer Transferring Pictures from a Camera to a Computer Start the computer to which Nikon Transfer was installed. Be sure that the camera is off. Connect the camera to the computer using the supplied USB cable. The camera is automatically turned on and the power-on lamp will light. The camera monitor will remain off. B Connecting to Televisions, Computers and Printers 1 2 3 Connecting the USB Cable • Be sure that connectors are properly oriented. Do not attempt to insert connectors at an angle, and do not use force when connecting or disconnecting the USB cable. • The connection may not be recognized if the camera is connected to the computer via a USB hub. 127 Connecting to a Computer 4 Start Nikon Transfer installed on the computer. Connecting to Televisions, Computers and Printers • Windows 7 When the Devices and Printers K S4000 screen is displayed, click Change program under Import pictures and videos. Select Copy pictures to a folder on my computer in the Change program dialog and click OK. Double-click Copy pictures to a folder on my computer on the Devices and Printers K S4000 screen. • Windows Vista When the AutoPlay dialog is displayed, click Copy pictures to a folder on my computer using Nikon Transfer. • Windows XP When the action selection dialog is displayed, select Nikon Transfer Copy pictures to a folder on my computer, and click OK. • Mac OS X Nikon Transfer will start automatically when the camera is connected to the computer if Yes was selected in the Auto-Launch setting dialog when Nikon Transfer was first installed. • If charge for the battery inserted into the camera is low, the computer may not recognize the camera. If the camera is not recognized, pictures will not be transferred. When battery charging starts automatically using power supplied by the computer, wait until battery charge has reached a sufficient level to begin transfer. • If there are a large number of images on the memory card, it may take some time for Nikon Transfer to start. 5 Confirm that the source device is displayed in the transfer options Source panel and click Start Transfer. Source device Start Transfer button At the Nikon Transfer default settings, all pictures are transferred to the computer. 128 Connecting to a Computer At the Nikon Transfer default settings, ViewNX starts automatically when transfer is complete and transferred pictures can be viewed. Disconnecting the camera Do not turn off the camera or disconnect the camera from the computer during transfer. When transfer is complete, turn off the camera and disconnect the USB cable. The camera turns off automatically if there is no communication with the computer for 30 minutes while the camera is connected via the USB cable. B Connecting to Televisions, Computers and Printers For more information on using Nikon Transfer or ViewNX, refer to help information contained in Nikon Transfer or ViewNX (A 130). Charging the Battery The charge lamp slowly blinks green while the battery inserted into the camera is charging (A 131). C Using a Card Reader The pictures stored on the memory card inserted into a card reader or similar device can also be transferred to the computer using Nikon Transfer. • If the memory card capacity is 2 GB or more, or if the memory card is SDHC-compliant, the card reader or similar device must support these memory card specifications. • Insert a memory card into the card reader or similar device, and refer to the steps 4 and 5 (A 128) to transfer pictures. • To transfer pictures stored in the camera’s internal memory to the computer, the pictures must first be copied to a memory card using the camera (A 100). 129 Connecting to a Computer D Starting Nikon Transfer or ViewNX Manually Connecting to Televisions, Computers and Printers Windows Choose Start menu> All Programs>Nikon Transfer>Nikon Transfer (or All Programs>ViewNX>ViewNX). Double-clicking the Nikon Transfer or ViewNX shortcut icon on the desktop will also start Nikon Transfer or ViewNX. Macintosh Open Applications and double-click Nikon Software>Nikon Transfer>Nikon Transfer (or Nikon Software>ViewNX>ViewNX). Clicking the Nikon Transfer or ViewNX icon on the Dock will also start Nikon Transfer or ViewNX. D Viewing Nikon Transfer and ViewNX Help Information For more information on Nikon Transfer or ViewNX, start Nikon Transfer or ViewNX and select Nikon Transfer Help or ViewNX Help from the Help menu. D Panorama Creation with Panorama Maker • Use a series of pictures taken in Panorama assist scene mode (A 70) to create a single panorama photo with Panorama Maker. • Panorama Maker can be installed on a computer using the supplied Software Suite CD. • After installation is complete, follow the procedure described below to start Panorama Maker. Windows Choose Start menu>All Programs>ArcSoft Panorama Maker 5>Panorama Maker 5. Macintosh Open Applications and double-click the Panorama Maker 5 icon. • For more information on using Panorama Maker, refer to the on-screen instructions and help information contained in Panorama Maker. D Image File Names and Folder Names See “Image/Sound File and Folder Names” (A 162) for more information. 130 Connecting to a Computer Charging While Connecting to a Computer Charge Lamp The following chart explains charge lamp status when the camera is connected to a computer. Charge lamp Description Blinks slowly (green) Battery charging. Off Battery not charging. If the charge lamp changes from slow blinking (green) to off while the power-on lamp is lit, charging is complete. Flickers (green) • Charge the battery indoors with an ambient temperature of 5 °C to 35 °C (41 °F to 95 °F). • A USB cable is not correctly connected or the battery is faulty. Reconnect the USB cable correctly or replace the battery. • Computer is in sleep mode and does not supply power. Reboot a computer. • The battery cannot be charged as computer’s specifications or settings does not support power supply to the camera. B Connecting to Televisions, Computers and Printers When connecting the camera to a computer via the supplied USB cable while Auto (default setting) is selected for the Charge by computer option (A 152) in the setup menu, the battery inserted into the camera is automatically charged using power supplied by the computer. See “Before Connecting the Camera” (A 126) and “Transferring Pictures from a Camera to a Computer” (A 127) for more information on connecting the camera to a computer. Notes on Charging with Connection to a Computer • The battery cannot be charged, nor can data be transferred, when the camera is connected to a computer before the camera’s date and time have been set (A 22). If the camera’s clock battery (A 142) has been exhausted, the date and time must be reset before the battery can be charged or images can be transferred with connection to a computer. In this case, use the Charging AC Adapter EH-68P (A 18) to charge the battery and then set the camera’s date and time. • If the camera is turned off, charging will also stop. • If a computer enters sleep mode while charging, charging will stop and the camera may be turned off. • When disconnecting the camera from a computer, turn the camera off and then disconnect the USB cable. • It may take longer to charge the battery with connection to a computer than with charging using the Charging AC Adapter EH-68P. Charging time increases when images are transferred while the battery is charging. • When the camera is connected to a computer, an application installed on the computer, such as Nikon Transfer, may start. If the camera was connected to the computer for the sole purpose of charging the battery, exit the application. • The camera turns off automatically if there is no communication with the computer for 30 minutes after the battery has finished charging. • Depending upon computer specifications, settings, and power supply and allocation, it may be impossible to charge the battery inserted into the camera via computer connection. 131 Connecting to a Printer Users of PictBridge-compatible (A 177) printers can connect the camera directly to the printer and print pictures without using a computer. Follow the procedures below to print pictures. Take pictures Connecting to Televisions, Computers and Printers Select pictures for printing and number of copies using Print set option (A 94) Connect to printer (A 133) Print pictures one at a time (A 134) Print multiple pictures (A 135) When printing is complete, turn the camera off and disconnect USB cable B Note on Power Source When connecting the camera to a printer, use a fully charged battery to prevent the camera from turning off unexpectedly. If the AC Adapter EH-62D (available separately) is used, COOLPIX S4000 can be powered from an electrical outlet. Do not use any other make or model of AC adapter as they may cause the camera to overheat or malfunction. B Note on Direct Printing To print pictures created in Draw scene mode (A 69) over a direct camera-to-printer connection, first create a print order with Print set (A 94) and then use the DPOF printing option (A 137). D 132 Printing Pictures In addition to printing pictures transferred to a computer from your personal printer and printing over a direct camera-to-printer connection, the following options are also available for printing pictures: • Inserting a memory card into a DPOF-compatible printer’s card slot • Taking a memory card to a digital photo lab For printing using these methods, specify the pictures and the number of prints each to the memory card using the Print set option in the playback menu (A 94). Connecting to a Printer Connecting the Camera to a Printer Turn off the camera. 2 Turn on the printer. Check printer settings. 3 Connect the camera to the printer using the supplied USB cable. 4 The camera automatically turns on. Connecting to Televisions, Computers and Printers 1 When properly connected, the PictBridge startup screen (1) will be displayed in the camera monitor, followed by the Print selection screen (2). 1 2 Print selection 15 05 2010 B 4 4 Connecting the USB Cable Be sure that connectors are properly oriented. Do not attempt to insert connectors at an angle, and do not use force when connecting or disconnecting the USB cable. B If the PictBridge Screen is not Displayed Turn the camera off and disconnect the USB cable. Set Charge by computer (A 152) in the camera’s setup menu to Off and reconnect the cable. 133 Connecting to a Printer Printing Pictures One at a Time After properly connecting the camera to the printer (A 133), follow the procedure described below to print a picture. 1 Connecting to Televisions, Computers and Printers Tap C or D to choose the desired picture and tap I. Print selection 15 05 2010 4 Tap B or rotate the zoom control to f (h) to switch to 6-thumbnail display. Tap Q or rotate the zoom control to g (i) to switch back to full-frame playback. 2 Tap Copies. PictBridge Start print Copies Paper size 3 Tap the desired number of copies (up to nine). Copies 1 2 3 4 5 6 7 8 9 0 4 Tap Paper size. PictBridge Start print Copies Paper size 134 4 Previous or subsequent picture can also be viewed by tapping the scroll bar. Connecting to a Printer 5 Tap the desired paper size. To specify paper size using printer settings, choose Default in the paper size menu. Paper size Default 3.5×5 in. 5×7 in. Connecting to Televisions, Computers and Printers Postcard 6 Tap Start print. PictBridge Start print Copies Paper size 7 Printing begins. Monitor display returns to the print selection screen shown in step 1 when printing is complete. Printing 002 004 To cancel printing before all copies have been printed, tap Cancel. Cancel Current number of copies/ total number of prints Printing Multiple Pictures After properly connecting the camera to the printer (A 133), follow the procedure described below to print multiple pictures. 1 When the Print selection screen is displayed, tap F. The Print menu screen is displayed. 2 Tap Paper size. To exit the print menu, tap H. Print selection 15 05 2010 4 4 Print menu Print selection Print all images DPOF printing Paper size 135 Connecting to a Printer 3 Tap the desired paper size. To specify paper size using printer settings, choose Default in the paper size option. Paper size Default 3.5×5 in. 5×7 in. Connecting to Televisions, Computers and Printers Postcard 4 Tap Print selection, Print all images, or DPOF printing. Print menu Print selection Print all images DPOF printing Paper size Print selection Choose pictures (up to 99) and the number of Print selection copies (up to nine) of each. 1 5 • Tap the desired picture and tap U or V to specify the number of copies to be printed. 1 1 1 • Pictures selected for printing can be recognized by the check mark (y) and the numeral indicating the number of copies to be printed. If no copies have been specified for pictures, the selection is canceled. • Tap Q or rotate the zoom control to g (i) to switch to full-frame playback. Tap B or rotate the zoom control to f (h) to switch back to 6-thumbnail display. • Tap I when setting is complete. • When the screen shown at right is displayed, Print selection tap Start print to start printing. Tap J to 010 prints return to the print menu. Start print Cancel 136 Connecting to a Printer Print all images Start print Cancel DPOF printing Print pictures for which a print order was created using the Print set option (A 94). • When the screen shown at right is displayed, tap Start print to start printing. Tap J to return to the print menu. DPOF printing 010 prints Start print View images Cancel • To view the current print order, tap View images. To print pictures, tap I. View images 1 1 5 1 5 Connecting to Televisions, Computers and Printers One copy each of all pictures stored in the internal memory, or on the memory card, is printed. • When the screen shown at right is displayed, Print all images tap Start print to start printing. Tap J to 012 prints return to the print menu. 1 Printing begins. Monitor display returns to the print menu (step 2) when printing is complete. To cancel printing before all copies have been printed, tap Cancel. Printing 002 004 Cancel Current number of copies/ total number of prints C Paper Size The camera supports the following paper sizes: Default (the default paper size for the printer connected to the camera), 3.5×5 in., 5×7 in., 100×150 mm, 4×6 in., 8×10 in., Letter, A3, and A4. Only sizes supported by the printer will be displayed. To specify paper size using printer settings, choose Default in the paper size option. 137 Basic Camera Setup Setup Menu The setup menu contains the following options. Welcome screen A 140 Choose whether or not a welcome screen is displayed when camera is turned on. A 141 Date Set camera clock and choose home and destination time zones. Monitor settings A 144 Adjust photo information display and monitor brightness settings. Date imprint A 144 Imprint shooting date and time on pictures. Electronic VR A 145 Choose whether or not vibration reduction is enabled when taking still pictures. Motion detection A 146 Enable or disable motion detection, which reduces the effects of subject movement and camera shake in still pictures. Basic Camera Setup A 147 AF assist Enable or disable AF-assist illuminator. Digital zoom A 148 Enable or disable digital zoom. Sound settings A 148 Adjust sound settings. A 149 Auto off Set time before camera enters standby mode for saving power. Format memory/Format card A 150 Format internal memory or memory card. Language A 151 Choose the language used for camera monitor display. Video mode A 151 Adjust settings necessary for connection to television. Charge by computer A 152 Choose whether or not to charge the camera battery when connecting to a computer via the USB cable. Blink warning 138 A 152 Specify whether or not the camera detects human subjects that have blinked with shooting using face priority. Setup Menu A 154 Reset all Restore camera settings to default values. A 156 Firmware version Display camera firmware version. Displaying the Setup Menu 1 Tap F to display the menu screen. 11 2 Tap the z tab. White balance Exposure comp. Continuous ISO sensitivity AF area mode Welcome screen Date Monitor settings Date imprint Electronic VR Motion detection Setup menu items can be accessed. Tap H, or another tab, to exit the setup menu. Basic Camera Setup Image mode 139 Setup Menu Welcome Screen Tap F M z (Setup menu) (A 139) M Welcome screen Choose whether or not a welcome screen is displayed when the camera is turned on. None (default setting) The camera enters shooting or playback mode without displaying the welcome screen. COOLPIX The camera displays a welcome screen and enters shooting or playback mode. Select an image Basic Camera Setup 140 Displays a picture selected for the welcome screen. When the picture selection screen is displayed, select a picture (A 99) and tap I. • As the selected picture is stored by the camera, it will be displayed when the camera is turned on even if the original picture is deleted. • Pictures taken at an Image mode setting (A 48) of P 3968×2232, and copies created at a size of 320 × 240 or smaller using small picture (A 116) or the crop (A 118) function, cannot be used. Setup Menu Date Tap F M z (Setup menu) (A 139) M Date Set the camera clock. Date Set camera clock to current date and time. Tap an item (the order in which day, month and year are displayed, day, month, year, hour, or minute) in the date screen. • Edit the highlighted item: tap A or B. • Apply the setting: tap I (A 23). Time zone w Home time zone can be specified and daylight saving is enabled or disabled from Time zone options. When the destination time zone (x) is selected, local time (A 143) is automatically calculated and the date and time in the selected region are recorded with pictures. Useful when traveling. 1 Tap Time zone. The Time zone menu is displayed. Date 15 05 2010 15 30 Date 2 Tap x Travel destination. The date and time displayed in the monitor changes according to the region currently selected. Basic Camera Setup Selecting Travel Destination Time Zone Time zone Time zone 15 05 2010 15 30 London, Casablanca Home time zone Travel destination 141 Setup Menu 3 Tap o. The time zone selection screen is displayed. Time zone 15 05 2010 15 30 London, Casablanca Home time zone 4 Tap C or D to choose the travel destination time zone and tap I. If daylight saving time is in effect, tap p to enable daylight saving time function. W is displayed at the top of the monitor and the camera clock is advanced one hour. Tapping p again to disable the daylight saving time function. 01 30 Travel destination +10 00 Tok yo Seoul While the travel destination time zone is selected, the Z icon will be displayed in the monitor when the camera is in shooting mode. Basic Camera Setup B Note on the Clock Battery The camera clock is powered by the clock battery. The clock battery charges when the main battery is inserted or an AC adapter is connected, and can provide several days of backup power after about ten hours of charging. C w Home Time Zone • To switch to the home time zone, tap w Home time zone in step 2. • To change the home time zone, tap w Home time zone in step 2 and complete steps 3 and 4. C Daylight Saving Time When daylight saving time starts or ends, turn the daylight saving time option on or off from the time zone selection screen displayed in step 4. D 142 Imprinting Date on Pictures Enable date imprint from the Date imprint option (A 144) in the setup menu after the date and time have been set. When the Date imprint option is enabled, pictures will be recorded with shooting date imprinted on them. Setup Menu D Time Zones The camera supports the time zones listed below. For time zones not listed below, set the camera clock to local time from the Date option. UTC +/– Location UTC +/– Location –11 Midway, Samoa +1 Madrid, Paris, Berlin –10 Hawaii, Tahiti +2 Athens, Helsinki, Ankara –9 Alaska, Anchorage +3 Moscow, Nairobi, Riyadh, Kuwait, Manama –8 PST (PDT): Los Angeles, Seattle, Vancouver +4 Abu Dhabi, Dubai –7 MST (MDT): Denver, Phoenix +5 Islamabad, Karachi –6 CST (CDT): Chicago, Houston, Mexico City +5.5 –5 EST (EDT): New York, Toronto, Lima +6 Colombo, Dhaka –4.5 Caracas +7 Bangkok, Jakarta –4 Manaus +8 Beijing, Hong Kong, Singapore –3 Buenos Aires, Sao Paulo +9 Tokyo, Seoul –2 Fernando de Noronha +10 Sydney, Guam –1 Azores +11 New Caledonia ±0 London, Casablanca +12 Auckland, Fiji New Delhi Basic Camera Setup 143 Setup Menu Monitor Settings Tap F M z (Setup menu) (A 139) M Monitor settings Set the options below. Image review On (default setting): Picture is automatically displayed in the monitor immediately after it is taken and the monitor display returns to shooting mode. Off: Picture is not displayed after it is taken. Brightness Choose from five settings for monitor brightness. The default setting is 3. Date Imprint (Imprinting Date and Time) Tap F M z (Setup menu) (A 139) M Date imprint Basic Camera Setup The shooting date and time can be imprinted on the pictures with shooting, allowing the information to be printed even from printers that do not support date printing (A 95). 15.05.2010 Off (default setting) Date and time are not imprinted on pictures. f Date Date is imprinted on pictures. S Date and time Date and time are imprinted on pictures. At settings other than Off, the icon for the current setting is displayed in the monitor (A 11). 144 Setup Menu B Notes on Date Imprint • Imprinted dates form a permanent part of image data and cannot be deleted. The date and time cannot be imprinted on pictures after they have been taken. • The date is not imprinted in the following situations: - Pictures taken in Panorama assist scene mode - Movies • Dates imprinted at an Image mode setting (A 48) of O 640×480 may be difficult to read. Choose an Image mode setting of N 1024×768 or larger when using date imprint. • The date is recorded using the format selected in the setup menu’s Date item (A 22, 141). C Date Imprint and Print Set When printing from DPOF-compatible printers that support the printing of shooting date and photo information, the date and information can be printed without imprinting this information on them, using settings in the Print set option (A 94). Electronic VR Choose whether or not electronic VR (vibration reduction) is used when taking still pictures. Auto Basic Camera Setup Tap F M z (Setup menu) (A 139) M Electronic VR Electronic VR is enabled and the effects of camera shake are reduced with shooting of still pictures when all of the following conditions are met. • The flash is turned off or set to slow sync mode. • A slow shutter speed is used. • The Continuous setting is set to Single. • The subject is dark. Off (default setting) Electronic VR is disabled. When Auto is selected, r is displayed in the monitor (A 11), and electronic VR is applied according to shooting conditions. 145 Setup Menu B Notes on Electronic Vibration Reduction • Electronic VR does not function when the flash is used, except when slow sync mode is applied. Electronic VR does not function when slow sync with red-eye reduction (A 63, 64) is used. • Electronic VR does not function with exposures that exceed a certain length of time. • Electronic VR is activated only when ISO sensitivity (A 54) is set to Auto. • Electronic VR does not function in the following scene modes. - Sports (A 63) - Night portrait (A 63) - Dusk/dawn (A 65) - Night landscape (A 65) - Museum (A 66) - Fireworks show (A 67) - Backlight (A 67) • Electronic VR does not function when Blink proof (A 74) is set to On. • The effectiveness of electronic VR decreases as camera shake increases. • The pictures taken using electronic vibration reduction may be somewhat “grainy” in appearance. D Electronic VR for Movies Basic Camera Setup To compensate for camera shake with movie recording, enable Electronic VR (A 122) from the movie menu (A 121). Motion Detection Tap F M z (Setup menu) (A 139) M Motion detection Enable motion detection to reduce the effects of subject movement and camera shake when shooting still pictures. Auto (default setting) When the camera detects the subject movement or camera shake, the ISO sensitivity and shutter speed are automatically increased to reduce blurring. However, motion detection does not function in the following situations. • Subject tracking is selected for the touch shooting setting • When the flash fires • When ISO sensitivity (A 54) is set to Fixed range auto, or ISO sensitivity is fixed at a particular value in A (auto) mode • When Multi-shot 16 (A 53) is selected • When Sports (A 63), Night portrait (A 63), Dusk/dawn (A 65), Fireworks show (A 67), or Backlight (A 67) scene mode is enabled • When recording movies Off 146 Motion detection is not enabled. Setup Menu The current motion detection setting can be confirmed in the camera monitor with shooting (A 11, 27). The motion detection icon turns green when the camera detects camera shake and increases shutter speed. When Off is selected, no icon is displayed. B Notes on Motion Detection • Motion detection may be unable to completely eliminate the effects of subject movement and camera shake in some situations. • Motion detection may not function if the subject exhibits significant movement or is too dark. • The pictures taken using motion detection may be somewhat “grainy” in appearance. AF Assist Tap F M z (Setup menu) (A 139) M AF assist Auto (default setting) AF-assist illumination will be used to assist the focus operation when the subject is dimly lit. The illuminator has a range of about 1.9 m (6 ft. 2 in.) at the maximum wide-angle position and about 1.1 m (3 ft. 7 in.) at the maximum telephoto position. Note that for some scene modes or focus areas, AF-assist illuminator may not light. Basic Camera Setup Enable or disable AF-assist illumination, which assists autofocus operation when the subject is dimly lit. Off AF-assist illuminator does not light. The camera may be unable to focus under dim lighting. 147 Setup Menu Digital Zoom Tap F M z (Setup menu) (A 139) M Digital zoom Enable or disable digital zoom. On (default setting) When the camera is zoomed in to the maximum optical zoom position, rotating the zoom control to g (i) triggers digital zoom (A 29). Off Digital zoom will not be activated (except when shooting movies). B Notes on Digital Zoom Basic Camera Setup • When digital zoom is in effect, AF area mode is set to Center (A 55). • Digital zoom cannot be used in the following situations. - Subject tracking is selected for the touch shooting setting - When Scene auto selector, Portrait, or Night portrait is selected in scene mode - When smart portrait mode is selected - When Multi-shot 16 (A 53) is selected - Just before recording a movie (up to 2× zoom can be activated while recording movies) Sound Settings Tap F M z (Setup menu) (A 139) M Sound settings Adjust the following sound settings. Button sound Select On (default setting) or Off. When On is selected, a beep will sound once when operations are completed successfully, twice when the camera acquires focus on the subject, and three times when an error is detected. Start-up sound will also play when the camera is turned on. Shutter sound Select On (default setting) or Off. No sound is played with shutter release when some features such as continuous shooting or BSS (best shot selector) are enabled, or when recording movies, even if On is selected. 148 Setup Menu Auto Off Tap F M z (Setup menu) (A 139) M Auto off When the camera is on and a period of time passes without any operations having been performed, the monitor will be turned off and the camera will enter standby mode (A 21) to save power. Once the camera has entered standby mode, the power-on lamp will blink, and if no operations are performed for another three minutes, the camera will turn off. Choose the time allowed to elapse before the camera enters standby mode if no operations are performed from 30 s, 1 min (default setting), 5 min, and 30 min. Basic Camera Setup C Canceling Standby Mode Cancel standby mode and reactivate the monitor by pressing any of the following buttons. • the power switch • the shutter-release button • the A button • the c button C Note on Auto Off The time allowed to elapse before the camera enters standby mode is fixed in the following situations: • When a menu is displayed: three minutes • During slide show playback: up to 30 minutes • When the AC adapter EH-62D is connected: 30 minutes 149 Setup Menu Format Memory/Format Card Tap F M z (Setup menu) (A 139) M Format memory/ Format card Use this option to format the internal memory or a memory card. Formatting the Internal Memory To format the internal memory, remove the memory card from the camera. The Format memory option is displayed in the setup menu. Formatting a Memory Card When a memory card is inserted in the camera, the Format card option is displayed in the setup menu. All images will be deleted! OK? Yes No Format card All images will be deleted! OK? Basic Camera Setup Yes B 150 Format memory No Formatting Internal Memory and Memory Cards • Formatting the internal memory or memory cards permanently deletes all data. Be sure to transfer important pictures to a computer before formatting. • Formatting the internal memory or memory card restores album icon settings (A 86) to the default setting (displayed as number). • Do not turn the camera off or open the battery-chamber/memory card slot cover during formatting. • Be sure to use this camera to format memory cards previously used in other devices the first time they are inserted into the COOLPIX S4000. Setup Menu Language Tap F M z (Setup menu) (A 139) M Language Choose one of 24 languages for display of camera menus and messages. Polish Danish Portuguese German Russian (default setting) Finnish Spanish Swedish Greek Turkish French Simplified Chinese Indonesian Traditional Chinese Italian Japanese Hungarian Korean Dutch Thai Norwegian Arabic Video Mode Basic Camera Setup Czech Tap F M z (Setup menu) (A 139) M Video mode Adjust settings for connection to a television. Choose from NTSC and PAL. 151 Setup Menu Charge by Computer Tap F M z (Setup menu) (A 139) M Charge by computer Choose whether or not the battery inserted into the camera is charged when the camera is connected to a computer via the USB cable (A 131). Auto (default setting) When the camera is connected to a computer that is running, the battery inserted into the camera is automatically charged using power supplied by the computer. Off The battery inserted into the camera is not charged when the camera is connected to a computer. B Notes on Connecting the Camera to a Printer Basic Camera Setup • The battery cannot be charged with connection to a printer, even if the printer complies with the PictBridge standard. • When Auto is selected for Charge by computer, it may be impossible to print pictures with direct connection of the camera to some printers. If the PictBridge startup screen is not displayed in the monitor after the camera is connected to a printer and turned on, turn the camera off and disconnect the USB cable. Set Charge by computer to Off and reconnect the camera to the printer. Blink Warning Tap F M z (Setup menu) (A 139) M Blink warning Specify whether or not the camera detects human subjects that have blinked using face priority (A 56) when shooting in the following modes. • A (auto) mode (when Face priority (A 55) is selected for AF area mode option). • Scene auto selector (A 60), Portrait (A 62), or Night portrait (A 63) is selected for the scene mode. On 152 When the camera detects that one or more human subjects may have blinked in a picture taken using face priority, the blink warning screen is displayed in the monitor. The face of the human subject that may have blinked when the shutter was released is framed by a yellow border. Should this occur, check the picture and determine whether or not another picture should be taken. See “Operating the Blink Warning Screen” (A 153) for more information. Off (default setting) Blink warning is not enabled. Setup Menu Operating the Blink Warning Screen When the blink warning screen shown at right is displayed in the monitor, the operations described below are available. If no operations are performed within a few seconds, the camera automatically returns to shooting mode. To Use Enlarge the detected face that blinked g (i) Switch to full-frame playback f (h) Delete the picture B Description Rotate the zoom control to g (i). If the camera detects that more than one human subject blinked, tap M or N to switch display to another face. Rotate the zoom control to f (h). E Tap E. I Tap the monitor, I, or H. The shutter-release button can also be pressed to return to shooting mode. H Basic Camera Setup Switch to shooting mode Did someone blink? Note on Blink Warning The blink warning does not function at continuous settings of Continuous, BSS, or Multi-shot 16. 153 Setup Menu Reset All Tap F M z (Setup menu) (A 139) M Reset all When Reset is selected, the camera’s settings will be restored to their default values. Basic Shooting Functions Option Touch shooting (A 34, 37, 40) Flash mode (A 42) Default value Touch shutter Auto Self-timer (A 44) Off Macro mode (A 45) Off Shooting Menu Option Basic Camera Setup Image mode (A 48) White balance (A 50) Exposure comp. (A 52) Default value I 4000×3000 Auto 0.0 Continuous (A 53) Single ISO sensitivity (A 54) Auto AF area mode (A 55) Face priority Autofocus mode (A 57) Single AF Scene Mode Option Default value Scene mode setting in the shooting-mode selection menu (A 59) Scene auto selector Hue adjustment in Food mode (A 66) Center Smart portrait Menu Option Skin softening (A 74) 154 Default value Normal Smile timer (A 74) On Blink proof (A 74) Off Setup Menu Movie Menu Option Movie options (A 121) Autofocus mode (A 122) Electronic VR (A 122) Default value N HD 720p Single AF Off Setup Menu Option Welcome screen (A 140) Image review (A 144) Brightness (A 144) Default value None On 3 Date imprint (A 144) Off Electronic VR (A 145) Off Auto AF assist (A 147) Auto Digital zoom (A 148) On Button sound (A 148) On Shutter sound (A 148) On Auto off (A 149) 1 min Charge by computer (A 152) Auto Blink warning (A 152) Basic Camera Setup Motion detection (A 146) Off Others Option Paper size (A 134, 135) Frame interval for Slide show (A 97) Default value Default 3s 155 Setup Menu • Selecting Reset also clears the current file number (A 162) from memory. Numbering will continue from the lowest number available. To reset file numbering to “0001”, delete all pictures stored in the internal memory or on the memory card (A 98) before selecting Reset. • The following menu settings will remain unaffected when menus are reset with Reset all. Shooting menu: Preset manual data (A 51) acquired for White balance Setup menu: Picture selected for Welcome screen (A 140), Date (A 141), Language (A 151), and Video mode (A 151) Firmware Version Tap F M z (Setup menu) (A 139) M Firmware version View the current camera firmware version. Basic Camera Setup 156 COOLPIX S4000 Ver.x . x Caring for the Camera Maximizing Camera Life and Performance To ensure continued enjoyment of this Nikon product, observe the following precautions when using or storing the device. B Keep dry The device will be damaged if immersed in water or subjected to high humidity. B Do not drop The product may malfunction if subjected to strong shock or vibration. B Handle the lens and all moving parts with care Do not apply force to the lens, lens cover, monitor, memory card slot or battery chamber. These parts are easily damaged. Applying force to the lens cover could result in camera malfunction or damage to the lens. Should the monitor break, care should be taken to avoid injury caused by broken glass and to prevent the liquid crystal from the display touching the skin or entering the eyes or mouth. B Do not point the lens at strong light sources for extended periods Avoid pointing the lens at the sun or other strong light sources for extended periods when using or storing the camera. Intense light may cause deterioration of the CCD image sensor, producing a white blur effect in photographs. Keep away from strong magnetic fields Do not use or store this device in the vicinity of equipment that generates strong electromagnetic radiation or magnetic fields. Strong static charge or the magnetic fields produced by equipment such as radio transmitters could interfere with the monitor, damage data stored on the memory card, or affect the product’s internal circuitry. B Avoid sudden changes in temperature Sudden changes in temperature, such as when entering or leaving a heated building on a cold day, can cause condensation to form inside the device. To prevent condensation, place the device in a carrying case or a plastic bag before exposing it to sudden changes in temperature. B Caring for the Camera B Turn the product off before removing or disconnecting the power source Do not remove the battery while the product is on, or while images are being recorded or deleted. Forcibly cutting power in these circumstances could result in loss of data or in damage to product memory or internal circuitry. 157 Maximizing Camera Life and Performance C Caring for the Camera 158 The Battery • Check the battery level before using the camera and replace or charge the battery if necessary. Do not continue charging once the battery is fully charged as this will result in reduced battery performance. Whenever possible, carry a fully charged spare battery when taking pictures on important occasions. • Do not use the battery at ambient temperatures below 0 °C (32 °F) or above 40 °C (104 °F). • Charge the battery indoors with an ambient temperature of 5 °C to 35 °C (41 °F to 95 °F) before use. • When charging the COOLPIX S4000 using the Charging AC adapter EH-68P or a computer, the battery is not charged at ambient temperatures below 0 °C (32 °F) or above 45 °C (113 °F). • Note that the battery may become hot during use; wait for the battery to cool before charging. Failure to observe these precautions could damage the battery, impair its performance, or prevent it from charging normally. • On cold days, the capacity of batteries tends to decrease. Be sure that the battery is fully charged before heading outside to take pictures in cold weather. Keep spare batteries in a warm place and exchange as necessary. Once warmed, a cold battery may recover some of its charge. • Dirt on the battery terminals can prevent the camera from functioning. Should the battery terminals become dirty, wipe them off with a clean, dry cloth before use. • If the battery will not be used for some time, insert it in the camera and run it flat before removing it for storage. The battery should be stored in a cool location with an ambient temperature of 15 to 25 °C (59 to 77 °F). Do not store the battery in hot or extremely cold locations. • Always remove the battery from the camera or optional battery charger when it is not being used. When inserted, minute amounts of current are drawn from the battery even when not in use. This may result in excessive draining of the battery and complete loss of function. Turning the camera on or off while the battery is exhausted can result in reduced battery life. • Recharge the battery at least once every six months and completely exhaust it before returning it to storage. • After removing the battery from the camera or optional battery charger, return the battery to the battery case and store in a cool place. • A marked drop in the time a fully-charged battery retains its charge, when used at room temperature, indicates that the battery needs to be replaced. Purchase a new EN-EL10 battery. • Replace the battery when it no longer holds a charge. Used batteries are a valuable resource. Please recycle used batteries in accordance with local regulations. Maximizing Camera Life and Performance Cleaning Lens Avoid touching glass parts with your fingers. Remove dust or lint with a blower (typically a small device with a rubber bulb attached to one end that is pumped to produce a stream of air out the other end). To remove fingerprints or other stains that cannot be removed with a blower, wipe the lens with a soft cloth, using a spiral motion that starts at the center of the lens and working toward the edges. If this fails, clean the lens using a cloth lightly dampened with commercial lens cleaner. Monitor Remove dust or lint with a blower. To remove fingerprints and other stains, clean the monitor with a soft, dry cloth, being careful not to apply pressure. Body Use a blower to remove dust, dirt or sand, then wipe gently with a soft, dry cloth. After using the camera at the beach or other sandy or dusty environment, wipe off any sand, dust, or salt with a dry cloth lightly dampened with fresh water and dry thoroughly. Note that foreign matter inside the camera could cause damage not covered by the warranty. Do not use alcohol, thinner, or other volatile chemicals. Storage C Caring for the Camera Turn the camera off when not in use. Be sure that the power-on lamp is off before putting the camera away. Remove the battery if the camera will not be used for an extended period. Do not store the camera with naphtha or camphor moth balls, or in any of the following locations: • Next to equipment that produces strong electromagnetic fields, such as televisions or radios • Exposed to temperatures below –10 °C (14 °F) or above 50 °C (122 °F) • Places that are poorly ventilated or subject to humidity of over 60% To prevent mold or mildew, take the camera out of storage at least once a month. Turn the camera on and release the shutter a few times before putting the camera away again. Notes on the Monitor • The monitor may contain a few pixels that are always lit or that do not light. This is a characteristic common to all TFT LCD displays, and does not indicate a malfunction. Images recorded using the product will not be affected. • White or colored streaks may be visible when bright subjects are framed in the monitor. This phenomenon, known as “smear,” occurs when extremely bright light strikes the image sensor; it is characteristic of image sensors and does not indicate a malfunction. Smear may also take the form of partial discoloration in the monitor during shooting. It does not appear in images recorded with the camera except in the cases of movies and of images recorded with Multi-shot 16 selected for Continuous. When shooting in these modes, we recommend that you avoid bright subjects such as the sun, reflected sunlight, and electric lights. • Images in the monitor may be difficult to see under bright lighting. • The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker, contact your Nikon-authorized service representative. 159 Technical Notes and Index Optional Accessories Rechargeable battery Rechargeable Li-ion Battery EN-EL10 Charging AC Adapter Charging AC Adapter EH-68P*, EH-68P (AR)* Battery charger Battery Charger MH-63 AC Adapter EH-62D Connecting the EH-62D 1 2 3 AC adapter Check that the AC adapter cord has been inserted correctly into the battery chamber before closing the battery-chamber/memory card slot cover. If part of the cord has not been inserted into the chamber the cover may be damaged during closure. USB cable USB Cable UC-E6 Audio/video cable Audio Video Cable EG-CP14 * When using in other countries, use a plug adapter (available commercially) as necessary. For more information about plug adapters, consult your travel agency. Technical Notes and Index 160 Optional Accessories Approved Memory Cards The following Secure Digital (SD) memory cards have been tested and approved for use in this camera. Memory cards with an SD Speed Class1 rating of 6 or faster are recommended for recording movies. Movie recording may stop unexpectedly when memory cards with a lower Speed Class rating are used. 1 2 3 SanDisk 2 GB2, 4 GB3, 8 GB3, 16 GB3, 32 GB3 TOSHIBA 2 GB2, 4 GB3, 8 GB3, 16 GB3, 32 GB3 Panasonic 2 GB2, 4 GB3, 8 GB3, 12 GB3, 16 GB3, 32 GB3 Lexar 2 GB2, 4 GB3, 8 GB3 Specification defining minimum data transfer speeds for SD and SDHC memory cards. If the memory card will be used with a card reader or similar device, be sure that the device supports 2 GB cards. SDHC compliant. If the memory card will be used with a card reader or similar device, be sure that the device is SDHC compliant. Contact the manufacturer for details on the above cards. Technical Notes and Index 161 Image/Sound File and Folder Names Pictures, movies, or voice memos are assigned file names as follows. D SC N00 0 1 . J P G Identifier (not shown on camera monitor) Original still pictures (voice memo attachment included) and movies DSCN Small copies (voice memo attachment included) SSCN Cropped copies (voice memo attachment included) RSCN Extension (signifies the file type) Still pictures .JPG Movies .AVI Voice memos .WAV File number (assigned automatically in ascending order, starting with “0001”) Copies created using editing function other than small picture and crop (voice memo FSCN attachment included) Copies created in Draw scene MSCN mode Technical Notes and Index 162 • Files are stored in folders named with a folder number followed by an identifier: “P_” plus a three-digit sequence number for pictures taken using Panorama assist scene mode (e.g. “101P_001”; A 70) and “NIKON” for all other pictures (e.g. “100NIKON”). When the number of files within a folder reaches 9999, a new folder will be created. File numbers will be assigned automatically starting with “0001.” • Voice memo file names have the same identifier and file number as the picture to which the voice memo is attached. • Files copied using Copy>Selected images are copied to the current folder, where they are assigned new file numbers in ascending order starting from the largest file number in memory. Copy>All images copies all folders from the source medium; file names do not change but new folder numbers are assigned in ascending order, starting from the largest folder number on the destination medium (A 100). • A single folder can hold up to 200 pictures; if the current folder already contains 200 pictures, a new folder, named by adding one to the current folder name, will be created the next time a picture is taken. If the current folder is numbered 999 and contains 200 pictures, or a picture is numbered 9999, no further pictures can be taken until the internal memory or memory card is formatted (A 150), or a new memory card is inserted. Error Messages The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them. Display Problem A Solution Clock not set. Set date and time. 141 B Battery running low. Prepare to charge or replace battery. 16, 18 N Battery exhausted. Battery exhausted. Charge or change battery. 16, 18 Battery temperature is high. Turn off camera, and allow battery to cool down before resuming use. After five seconds, this message will disappear, the monitor will turn off, and the power-on lamp will blink rapidly. After the lamps blink for three minutes, the camera will turn off automatically. Pressing the power switch also turns off the camera. 21 Q (● blinks red) Camera cannot focus. 30, 31 • Refocus. • Focus on another 39 subject positioned at the same distance from the camera as the intended subject. P Please wait for the camera to finish recording. Camera cannot perform other operations until recording is complete. Wait until message clears from display automatically when recording is complete. – u Memory card is write protected. Write-protect switch is in “lock” position. Slide write-protect switch to “write” position. 25 Error accessing memory card. • Use approved card. 161 • Check that connectors 24 are clean. • Confirm that memory 24 card is correctly inserted. P Battery temperature high P This card cannot be used. P This card cannot be read. Technical Notes and Index O (blinks) 163 Error Messages Display P Card is not formatted. Format card? Yes No u Out of memory. Technical Notes and Index 164 P Image cannot be saved. Problem Solution Memory card has not been formatted for use in COOLPIX S4000. Formatting deletes all data stored on the memory card. Be sure to tap No and make copies of any pictures which need to be kept before formatting the memory card. Tap Yes to format the memory card. • Choose smaller image size. • Delete pictures. Memory card is full. A 25 48 33, 98, 123 • Insert new memory card. 24 • Remove memory card 24 and use internal memory. Error occurred while recording picture. Format internal memory or 150 memory card. Camera has run out of file numbers. Insert new memory card or format internal memory or memory card. Picture cannot be used for welcome screen. The following pictures cannot be registered as welcome screen. • Pictures taken at an Image mode setting of 140 P 3968×2232 • Pictures reduced to 320 × 240 size or smaller with cropping or small picture editing Insufficient space to save a copy. Delete pictures from destination. N Over 200 pictures have Album is full. No already been added to further pictures can be album. added. • Remove some pictures from album. • Add to other albums. u A blink was detected in the picture just taken. Check the picture in playback mode. One or more portrait subjects may have blinked when the picture was taken. 162 98 84 81 74, 75 Error Messages Display Problem A Solution u Image cannot be modified. Cannot edit selected picture. • Select pictures that 105 support editing function. • Movies cannot be – edited. u Cannot record movie. Time out error while recording movie. Choose memory card with faster write speed. No pictures in the internal memory or memory card. 24 • Remove the memory card from the camera to play back pictures stored in the camera’s internal memory. • To copy picture from 100 internal memory to memory card, tap F. The copy screen will be displayed and pictures in the internal memory can be copied to memory card. The picture has not been added to album. • Add the picture to album. • Choose the album to which picture was added. No pictures are contained in the category selected in auto sort mode. Select the category containing the sorted pictures. 89 N File contains no image data. File not created with this camera. P This file cannot be played back. File cannot be viewed on this camera. View file using a computer or the device used to create or edit this file. – u All images are hidden. No pictures are available for a slide show. – 97 N This image cannot be deleted. Picture is protected. Disable protection. 100 N Travel destination is in the current time zone. Destination in same time zone as home. – 143 N Memory contains no images. 24 81 83 Technical Notes and Index 165 Error Messages Display Problem A Solution Turn camera off and then on again. If error persists, contact retailer or Nikonauthorized service representative. 26 USB cable disconnected P during data transfer to Communications error printer. Turn camera off and reconnect cable. 133 System error Q Error has occurred in camera’s internal circuitry. Turn camera off, remove and reinsert battery, and turn camera on. If error persists, contact retailer or Nikon-authorized service representative. 17, 21 PR Printer error: check printer status. Printer error. Check printer. After solving the problem, tap Resume – to resume printing.* PR Printer error: check paper Specified size of paper is not loaded in printer. Load the specified paper, tap Resume to resume printing.* – PR Printer error: paper jam Paper has jammed in printer. Eject the jammed paper, tap Resume to resume printing.* – PR Printer error: out of paper No paper is loaded in printer. Load the specified paper, tap Resume to resume printing.* – PR Ink error. Printer error: check ink Check ink, tap Resume to resume printing.* – PR Running out of ink or ink Printer error: out of ink cartridge is empty. Replace ink, tap Resume to resume printing.* – PR Printer error: file corrupt Tap Cancel to cancel printing. – Lens error Q Lens error. Technical Notes and Index An error caused by the image file has occurred. * See the documentation provided with your printer for further guidance and information. 166 Troubleshooting If the camera fails to function as expected, check the list of common problems below before consulting your retailer or Nikon-authorized service representative. Display, Settings and Power Supply Cause/Solution A • Camera is off. • Battery is exhausted. • Standby mode for saving power: press the power switch, the shutter-release button, A button, or c button. • When flash lamp blinks, wait until flash has charged. • Camera and computer are connected via USB cable. • Camera and TV are connected via audio/video cable. • When connecting to an electrical outlet using a Charging AC Adapter, the camera cannot be turned on. 21 26 21, 149 Monitor is hard to read. • Adjust monitor brightness. • Monitor is dirty. Clean monitor. 144 159 26 149 Camera turns off without warning. • Battery is exhausted. • Camera has turned off automatically to save power. • Battery is cold. • The camera turns off if the Charging AC Adapter is connected while the camera is on. • The camera turns off if the USB cable connecting it to a computer or printer is disconnected. Reconnect the USB cable. • If camera clock has not been set, “Date not set” indicator blinks with shooting and movie recording. Pictures and movies recorded before clock is set are dated “00/00/0000 00:00” or “01/01/2010 00:00” respectively. Set the correct time and date from the Date option in the setup menu. • Check camera clock regularly against more accurate timepieces and reset as required. 22, 141 Problem Monitor is blank. 127 124 18 158 18 127, 129, 133 Technical Notes and Index Date and time of recording are not correct. 43 141 No indicators displayed in monitor. Tap A to change the information displayed in the monitor. 10, 12 Date imprint not available. Camera clock has not been set. 22, 141 167 Troubleshooting Problem Cause/Solution Date not appearing on pictures The current shooting mode is one that does not even when Date imprint is support Date imprint. enabled. A 145 Camera settings reset. Clock battery is exhausted; all settings were restored to their default values. Monitor turns off, and the power-on lamp blinks rapidly. Battery temperature is high. Turn off camera and allow battery to cool down before resuming use. After the lamp blinks for three minutes, the 21 camera will turn off automatically. Pressing the power switch also turns off the camera. Battery inserted into the camera is not charged when the camera is connected to a computer. • The battery is not charged when the camera is turned off. • Charging stops if the computer enters sleep mode while the battery is charging. The camera may be turned off. • Depending upon computer specifications, settings, and status, it may be impossible to charge the battery inserted into the camera via computer connection. 142 131 Electronically Controlled Cameras Technical Notes and Index 168 In extremely rare instances, unusual characters may appear in the monitor and the camera may stop functioning. In most cases, this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the battery, then turn the camera on again. In the event of continued malfunction, contact your retailer or Nikon-authorized service representative. Note that disconnecting the power source as described above may result in the loss of any data not recorded to internal memory or the memory card at the time the problem occurred. Data already recorded will not be affected. Troubleshooting Shooting Problem Cause/Solution • When camera is in playback mode, press the A button or the shutter-release button. No picture taken when shutter• When menus are displayed, tap H. release button is pressed. • Battery is exhausted. • When flash lamp blinks, flash is charging. A 6, 32 14 26 43 • The intended subject is one with which autofocus does not perform well. • Set AF assist in the setup menu to Auto. • Turn camera off and then on again. 31 Camera cannot focus. Pictures are blurred. • Use flash. • Increase the ISO sensitivity value. • Enable electronic vibration reduction or motion detection. • Use BSS (best shot selector). • Use tripod and self-timer. 42 54 145, 146 53 44 Streaks of light or partial discoloration are visible in the monitor. Smear occurs when extremely bright light strikes the image sensor. When shooting with Continuous set to Multi-shot 16 and when recording movies, avoiding bright objects, such as the sun, reflections of the sun, and electric lights is recommended. 159 Bright specks appear in pictures taken with flash. Flash is reflecting off particles in air. Set the flash mode setting to W (off). 43 Flash does not fire. • The flash mode is set to W (off). • Scene mode with which the flash does not function is selected. • On is selected for Blink proof in smart portrait menu. • Movie is selected for shooting mode. • Another function that restricts flash is enabled. Optical zoom cannot be used while recording movies. 42 59-67 74 Technical Notes and Index Optical zoom cannot be used. 147 21 119 58 120 169 Troubleshooting Problem A Technical Notes and Index Digital zoom cannot be used. Image mode not available. Another function that restricts the Image mode 58 option is enabled. No sound when shutter is released. • Off is selected for Sound settings>Shutter 148 sound in setup menu. No sound is heard with some shooting modes and settings, even when On is selected. • The speaker is being blocked. Do not cover 5, 28 the speaker. AF-assist illuminator does not light. Off is selected for the AF assist option in the setup menu. AF-assist illuminator may not light depending on the position of the focus area or the current scene mode, even when Auto is selected. 62-68, 147 Pictures appear smeared. Lens is dirty. Clean lens. 159 Colors are unnatural. White balance does not match light source. 50 Randomly spaced bright pixels (“noise”) appear in image. Shutter speed too slow or ISO sensitivity is high as the subject is dark. Noise can be reduced by: • Using flash. • Specifying a lower ISO sensitivity setting. 42 54 Pictures are too dark (underexposed). Pictures are too bright (overexposed). 170 Cause/Solution • Digital zoom is set to Off in the setup menu. • Digital zoom is not available in the following situations. - Subject tracking is selected for the touch shooting setting. - When Scene auto selector, Portrait, or Night portrait scene mode is selected. - When shooting in smart portrait mode - When Continuous is set to Multi-shot 16. - Just before recording a movie (up to 2× can be applied while recording movies). • • • • • • The flash mode is set to W (off) Flash window is blocked. Subject is beyond flash range. Adjust exposure compensation. Increase ISO sensitivity. Subject is backlit. Select Backlight scene mode or set the flash mode setting to X (fill flash). Adjust exposure compensation. 148 40 60, 62, 63 72 53 119 42 28 42 52 54 42, 67 52 Troubleshooting A Problem Cause/Solution Unexpected results when flash set to V (auto with red-eye reduction). When taking pictures with V (auto with redeye reduction) or fill flash with slow sync and red-eye reduction in Night portrait scene mode, In-Camera Red-Eye Fix may be applied to areas not affected by red-eye. Use any scene mode other than Night portrait, and change the flash mode to any setting other than V (auto with red-eye reduction) and try shooting again. Skin tones are not softened. • In some shooting conditions, facial skin tones 73 may not be smoothed. • Select e (skin softening) in the retouch menu 112 for pictures containing four or more faces. Saving images takes time. It may take more time to save images in the following situations. • When the noise reduction function is in operation • When flash mode is set to V (auto with redeye reduction) • When the skin softening function is applied while shooting 42, 63 43 43 62, 63, 74 Problem A Cause/Solution File cannot be played back. • File or folder was overwritten or renamed by – computer or other make of camera. • The COOLPIX S4000 is not able to playback 123 movies recorded with another make or model of digital camera. Cannot zoom in on picture. Playback zoom cannot be used with movies, small pictures, or pictures that have been cropped to a size of 320 × 240 or smaller. Cannot record or play back voice memos. • Voice memos cannot be attached to movies. • Voice memos cannot be attached to images taken with other cameras. Voice memos attached to images using another camera cannot be played back on this camera. Technical Notes and Index Playback – 123 103 171 Troubleshooting Problem Cannot edit pictures. Pictures not displayed on television. 123 48 • Choose correct Video mode. • Memory card contains no pictures. Replace the memory card. Remove the memory card to play back pictures from the internal memory. • TV display is turned off and pictures are displayed in the camera monitor. 151 24 Album icon restored to default settings, or pictures added to Data on the memory card may not be played album not displayed in favorite back correctly if overwritten by a computer. pictures playback. Technical Notes and Index The recorded pictures are not displayed in auto sort mode. Nikon Transfer does not start when camera is connected. 172 A Cause/Solution • These options cannot be used with movies. • These options cannot be used with pictures taken at an Image mode setting of P 3968×2232. • Select pictures that support editing functions. • Camera is unable to edit pictures taken with other cameras. 105 105 125 – • The desired picture was sorted to a category other than the category currently displayed. • Pictures recorded by a camera other than the COOLPIX S4000 and pictures copied using the Copy option cannot be displayed in auto sort mode. • Pictures recorded in the internal memory or on the memory card may not be played back correctly if overwritten by a computer. • Up to 999 pictures and movies in total can be added to each category. If the desired category already contains 999 pictures or movies in total, new pictures or movies cannot be added. 88 • • • • • • 21 26 127 – 126 130 Camera is off. Battery is exhausted. USB cable is not correctly connected. Camera is not recognized by the computer. Confirm system requirements. Computer is not set to start Nikon Transfer automatically. For more information on Nikon Transfer, refer to help information contained in Nikon Transfer. 89 – 89 Troubleshooting Problem Cause/Solution With some PictBridge-compatible printers, the PictBridge startup screen may not be displayed The PictBridge startup screen is and it may be impossible to print pictures when not displayed when the Auto is selected for the Charge by computer camera is connected to a option in the setup menu. Set the Charge by printer. computer option to Off and reconnect the camera to the printer. Cannot select paper size with camera. Paper size cannot be selected from the camera in the following situations, even when printing from a PictBridge-compatible printer: • The printer does not support the paper sizes specified by the camera. • The printer automatically selects the paper size. 152 24 24 69, 94, 137 134, 135 – Technical Notes and Index Pictures to be printed are not displayed. • Memory card contains no pictures. Replace the memory card. • Remove the memory card to print pictures from the internal memory. • To print pictures created in Draw scene mode over a direct camera-to-printer connection, first create a print order with Print set and then use the DPOF printing option. A 173 Specifications Nikon COOLPIX S4000 Digital Camera Type Effective pixels Image sensor Lens Focal length f/-number Construction Digital zoom Vibration reduction Autofocus (AF) Focus range (from lens) Focus-area selection Monitor Technical Notes and Index Frame coverage (shooting mode) Frame coverage (playback mode) Storage Media File system File formats Image size (pixels) ISO sensitivity (Standard output sensitivity) 174 Compact digital camera 12.0 million 1/2.3-in. CCD; total pixels: approx. 12.39 million 4× optical zoom, NIKKOR lens 4.9-19.6mm (angle of view equivalent to that of 27-108mm lens in 35mm [135] format) f/3.2-5.9 6 elements in 5 groups Up to 4× (angle of view equivalent to that of approx. 432mm lens in 35mm [135] format) Electronic VR Contrast-detect AF • Approx. 50 cm (1 ft. 8 in.) to ∞ • Macro mode: Approx. 8 cm (3.2 in.) to ∞ (wide-angle position) Face priority, auto (9-area automatic selection), center, manual (focus area can be selected using the touch panel) 7.5 cm/3-in., approx. 460k-dot, TFT LCD (touch panel) with anti-reflection coating and 5-level brightness adjustment Approx. 97% horizontal and 97% vertical (Compared to actual picture) Approx. 100% horizontal and 100% vertical (Compared to actual picture) • Internal memory (approx. 45 MB) • SD (Secure Digital) memory cards DCF, Exif 2.2, and DPOF compliant Still pictures: JPEG Sound files (Voice Memo): WAV Movies: AVI (Motion-JPEG compliant) • 12M (High) [4000 × 3000P] • 12M [4000 × 3000] • 8M [3264 × 2448] • 5M [2592 × 1944] • 3M [2048 × 1536] • PC [1024 × 768] • VGA [640 × 480] • 16:9 [3968 × 2232] • ISO 80, 100, 200, 400, 800, 1600, 3200 • Auto (auto gain from ISO 80 to 1600) • Fixed range auto (ISO 80 to 400, 80 to 800) Specifications Exposure Metering Exposure control Range (A auto mode) Shutter Speed Aperture Range Self-timer Built-in flash Range (approx.) (ISO sensitivity: Auto) 256-segment matrix, center-weighted (digital zoom less than 2×), spot (digital zoom 2× or more) Programmed auto exposure with motion detection and exposure compensation (–2.0 to +2.0 EV in steps of 1/3 EV) [W]: –0.6 to +17.2 EV [T]: 1.2 to 19 EV (exposure values achieved with automatic ISO sensitivity adjustment converted to ISO 100 values) Mechanical and charge-coupled electronic shutter 1/2000-1 s 4 s (when scene mode is set to Fireworks show) Electronically-controlled ND filter (–2.6 AV) selection 2 steps (f/3.2 and f/8 [W]) Can be selected from 10 and 2 second duration Technical Notes and Index [W]: 0.5 to 4.5 m (1 ft. 8 in. to 14 ft.) [T]: 0.5 to 2.4 m (1 ft. 8 in. to 7 ft.10 in.) Flash control TTL auto flash with monitor preflashes Interface Hi-Speed USB Data Transfer Protocol MTP, PTP Video output Can be selected from NTSC and PAL I/O terminal Audio video output/digital I/O (USB) Supported languages Arabic, Chinese (Simplified and Traditional), Czech, Danish, Dutch, English, Finnish, French, Greek, German, Hungarian, Indonesian, Italian, Japanese, Korean, Polish, Portuguese, Norwegian, Russian, Spanish, Swedish, Thai, Turkish Power sources One EN-EL10 Rechargeable Li-ion Battery (supplied) AC Adapter EH-62D (available separately) Charging time Approx. 2 hours and 10 minutes (when using Charging AC Adapter EH-68P/EH-68P (AR) and when no charge remains) Battery life* Approx. 190 shots (EN-EL10) Dimensions Approx. 94.5 × 56.5 × 20.4 mm (3.8 × 2.3 × 0.8 in.) (excluding (W × H × D) projections) Weight Approx. 131 g (4.7 oz.) (including battery and SD memory card) Operating environment Temperature 0 to 40 °C (32 to 104 °F) Humidity Less than 85% (no condensation) 175 Specifications • Unless otherwise stated, all figures are for a camera with a fully-charged Rechargeable Li-ion Battery EN-EL10 operated at an ambient temperature of 25 °C (77 °F). * Based on Camera and Imaging Products Association (CIPA) standards for measuring the life of camera batteries. Measured at 23 (±2) °C (73 (±4) °F); zoom adjusted with each shot, flash fired with every other shot, image mode set to I 4000×3000. Battery life may vary depending on shooting interval and length of time menus and images are displayed. Rechargeable Li-ion Battery EN-EL10 Type Rechargeable lithium-ion battery Rated capacity DC 3.7 V, 740 mAh Operating temperature 0 to 40 °C (32 to 104 °F) Dimensions (W × H × D) Approx. 31.5 × 39.5 × 6 mm (1.2 × 1.6 × 0.2 in.) (excluding projections) Weight Approx. 15 g (0.5 oz) (excluding battery case) Charging AC Adapter EH-68P/EH-68P (AR) Technical Notes and Index Rated input AC 100-240 V, 50/60 Hz, 0.065-0.04 A Rated capacity 6.5-9.6 VA Rated output DC 5.0 V, 0.5 A Operating temperature 0 to 40 °C (32 to 104 °F) Dimensions (W × H × D) EH-68P: Approx. 55 × 22 × 65 mm (2.2 × 0.9 × 2.6 in.) EH-68P (AR): Approx. 55 × 51.6 × 66 mm (2.2 × 2.0 × 2.6 in.) Weight EH-68P: Approx. 60 g (2.1 oz) EH-68P (AR): Approx. 65 g (2.3 oz) B 176 Specifications Nikon will not be held liable for any errors this manual may contain. The appearance of this product and its specifications are subject to change without notice. Specifications Supported Standards • DCF: Design Rule for Camera File System is a standard widely used in the digital camera industry to ensure compatibility among different makes of camera. • DPOF: Digital Print Order Format is an industry-wide standard that allows pictures to be printed from print orders stored on memory card. • Exif version 2.2: This camera supports Exchangeable Image File Format for Digital Still Cameras (Exif) version 2.2 for digital still cameras, a standard that allows information stored with photographs to be used for optimal color reproduction when images are output from Exif-compliant printers. • PictBridge: A standard developed cooperatively by the digital camera and printer industries, allowing photographs to be output directly to a printer without connecting the camera to a computer. Technical Notes and Index 177 Index Symbols A Auto mode 26 C Scene mode 59 F Smart portrait mode 72 D Movie 119 c Playback mode 32 h Favorite pictures mode 81 F Auto sort mode 88 C List by date mode 91 z Setup menu 138 g (Tele) 4 f (Wide) 4 i Playback zoom 4, 79 h Thumbnail playback 4, 79 A Shooting mode button 5, 6 c Playback button 5, 6, 32 R 71 A Technical Notes and Index AC adapter 160 AF area 30 AF area mode 55 AF assist 147 Album 83 Aperture 30 Audio/video cable 124, 160 Audio/video-in jack 124 Auto flash 42 Auto mode 26 Auto off 149 Auto sort menu 90 Auto sort mode 88 Autofocus 45 Autofocus mode 57, 122 AVI 162 B 178 Back light o 67 Battery 16, 18, 142 Battery charger 18, 160 Battery latch 5, 16 Battery level 26 Battery-chamber 5 Battery-chamber/memory card slot cover 5, 16, 24 Beach/snow g 64 Best Shot Selector 53 Black-and-white 117 Blink proof 74 Brightness 144 BSS 53 Built-in flash 4, 42 Built-in microphone 4, 103 Button sound 148 C Charge by computer 152 Charge lamp 5, 19, 131 Charger 18 Charging AC Adapter 18, 160 Close-up k 65 Cloudy 50 Color options 117 Compression ratio 48 Computer 126, 126–129 copying pictures to 126–129 Connector cover 5 Continuous 53 Copy n 67 Copying pictures 100 Crop 118 Cyanotype 117 D Date 22, 141 Date imprint 96, 144 Daylight 50 Daylight saving time 22, 142 Delete 33, 98, 104, 123 Digital zoom 29, 148 Direct print 132 D-Lighting 105, 111 DPOF 177 DPOF print 137 Index Drag 8 Draw A 67, 69 DSCN 162 Dusk/dawn i 65 Indicator lamp 5 Internal memory 24 Internal memory indicator 27 ISO sensitivity 43, 54 E J EH-68P/EH-68P (AR) 18 Electronic VR 122, 145 EN-EL10 16, 18 Exposure comp. 52 Extension 162 Eyelet for camera strap 4 JPG 162 F H Halfway 7 Help 15 Landscape c 62 Language 151 Lens 4, 174 Lens cover 4 Li-ion rechargeable battery 16, 18 List by date menu 92 List by date mode 91 M Macro mode 45 Memory capacity 26 Memory card 24, 161 Memory card slot 5, 24 Menus 140 Monitor 5, 10, 159 Monitor settings 144 Motion detection 146 Movie length 121 Movie menu 121 Movie playback 123 Movie settings 121 Multi-shot 16 53 Museum l 66 Technical Notes and Index Face priority 55, 56 Favorite pictures mode 85 File names 162 Fill flash 42 Fireworks show m 67 Firmware version 156 Fixed range auto 54 Flash 42, 43 Flash lamp 5, 43 Flash off 42 Fluorescent 50 Focus 7, 30, 55 Folder name 162 Food u 66 Format 25, 150 Format memory card 25, 150 Formatting internal memory 150 FSCN 162 Full-frame playback 75 Full-time AF 57, 122 L N Night landscape j 65 Night portrait e 63 Nikon Transfer 126, 127 Number of exposures remaining 26, 49 O I Optional accessories 160 Identifier 162 Image mode 27, 48, 74 Image review 144 Incandescent 50 P Paint 107 Panorama assist p 68, 70 Panorama Maker 126, 130 179 Index Quick retouch 110 Single 53 Single AF 57, 122 Skin softening 74, 112 Slide show 97 Slow Sync 42 Small picture 116 Smart portrait menu 74 Smart portrait mode 72 Smile timer 74 Software Suite 126 Sound settings 148 Speaker 5 Sports d 63 SSCN 162 Strap 7 Stretch 114 Stylus 9 Subject tracking 40 Sunset h 64 R T Rechargeable battery 160 Rechargeable Li-ion battery 16 Recording movies 119 Red-eye reduction 42, 43 Reset all 154 Rotate image 102 RSCN 162 Tap 8 Thumbnail playback 77 Time zone 22, 141, 143 Touch AF/AE 37 Touch shooting 10 Touch shutter 34 Tripod socket 5 TV 124 TV movie 121 Paper size 134, 135 Party/indoor f 64 Perspective control 115 PictBridge 132, 177 Playback 32, 33, 75, 77, 79, 104, 123 Playback menu 93 Playback mode 80 Portrait b 62 Power 22, 26 Power switch 4, 26 Power-on lamp 4, 26 Preset manual 51 Press halfway 7 Print 134, 135 Print set (Date) 95 Printer 132 Protect 100 Q Technical Notes and Index 180 S Scene auto selector x 60 Scene mode 59, 62 Self-timer 44 Self-timer lamp 4, 44 Sepia 117 Setup menu 138 Shooting 26, 28, 30 Shooting menu 47 Shooting mode 46 Shutter sound 148 Shutter speed 30 Shutter-release button 4, 30 U USB cable 127, 133 USB/audio/video output connector 5, 124, 126, 132 V Video mode 125, 151 ViewNX 126 Vivid color 117 Voice memo 103 Volume 104, 123 Index W WAV 162 Welcome screen 140 White balance 50 Z Zoom control 4, 29, 123 Technical Notes and Index 181 Index Technical Notes and Index 182 DIGITAL CAMERA User’s Manual No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION. En YP0B01(11) 6MM77811-01 En
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 196 Page Mode : UseOutlines Page Layout : SinglePage Create Date : 2009:12:14 16:19:11+09:00 Author : Nikon Corporation Creator : PScript5.dll Version 5.2.2 Title : Producer : ilovepdf.com Modify Date : 2017:06:15 06:39:14+02:00EXIF Metadata provided by EXIF.tools