Dell EMC OpenManage Ansible Modules Version 1.3 Installation Guide OMAM Install
User Manual:
Open the PDF directly: View PDF 
.
Page Count: 7
| Download | |
| Open PDF In Browser | View PDF |
Dell EMC OpenManage Ansible Modules Version 1.3 Installation Guide Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Dell EMC OpenManage Ansible Modules Version 1.3 © Copyright 2019 Dell Inc. GNU General Public License v3.0+ (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt) All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners. 2019 - 03 Rev. A01 Contents 1 Overview........................................................................................................................................................ 4 Prerequisites....................................................................................................................................................................... 4 OpenManage Ansible Modules Support Matrix............................................................................................................. 4 2 Install Dell EMC OpenManage Ansible Modules version 1.3 from GitHub........................................................6 3 Uninstall Dell EMC OpenManage Ansible Modules version 1.3 when downloaded from GitHub...................... 7 Contents 3 1 Overview Dell EMC OpenManage Ansible Modules allows data center and IT administrators to use RedHat Ansible to automate and orchestrate the configuration, deployment, and update of Dell EMC PowerEdge Servers (12th generation of PowerEdge servers and later) by leveraging the management automation capabilities in-built into the Integrated Dell Remote Access Controller (iDRAC). With the latest release of Dell EMC OpenManage Ansible Modules, the capabilities have improved with support for OpenManage Enterprise. OpenManage Ansible Modules allows users to retrieve device inventory, configure, and update firmware of devices managed by OpenManage Enterprise. This installation guide provides information about installation and uninstallation of Dell EMC OpenManage Ansible Modules. The latest stable version of OpenManage Ansible Modules is available at dell.com/support. In addition to dell.com/support, you can download OpenManage Ansible modules from https://github.com/dell/dellemc-openmanage-ansible-modules. Modules that are downloaded from this GitHub location are supported by Dell EMC. Topics: • Prerequisites • OpenManage Ansible Modules Support Matrix Prerequisites Following are the requirements to install Dell EMC OpenManage Ansible Modules: • Ensure that you install Ansible version 2.7.5 or later. • Ensure that you install Python version 2.7.5 or later. For OpenManage Ansible modules for iDRAC, install the supported version of OpenManage Python Software Development Kit (OMSDK). NOTE: To install OMSDK, run pip install omsdk. NOTE: Ensure that either internet connectivity exists or the local Python Package Index (PyPI) repository exists. NOTE: In the 14th Generation of PowerEdge Servers, WSMan runs as non-root user and you need to set 644 as a permission on the share to access the files. NOTE: It is recommended to update the ansible configuration setting environment variables to point to the current module paths, if any. OpenManage Ansible Modules Support Matrix Table 1. Control Machine Requirements Python Version Supported Operating System 2.7.5 and later • • 4 Overview Red Hat Enterprise Linux (RHEL) 7.6 and above SLES 15 Table 2. Managed Node Requirements Dell EMC Device Supported Firmware Versions 12th and 13th generations of PowerEdge servers 2.60.60.60 and above 14th generation of PowerEdge servers 3.21.21.21 and above Overview 5 2 Install Dell EMC OpenManage Ansible Modules version 1.3 from GitHub If you want to take advantage of the new features when they are implemented, then you can go to the GitHub repository using the given steps. You can either clone the repository or download a specific release. • To install the latest development version: # Clone the development branch git clone -b devel --single-branch https://github.com/dell/dellemc-openmanage-ansible-modules cd dellemc-openmanage-ansible-modules # Install the latest version. Run the below command using the sudo or super-user privileges if Ansible is installed using root permission. python install.py NOTE: If previous version of Dell EMC OpenManage Ansible Modules is installed, you are prompted with an upgrade message. Press Y to upgrade to the latest version. • To install the latest stable version: # Clone the master branch git clone https://github.com/dell/dellemc-openmanage-ansible-modules cd dellemc-openmanage-ansible-modules # Install the latest version. Run the below command using the sudo or super-user privileges if Ansible is installed using root permission. python install.py • To install a specific release: # Clone v1.3 release version git clone -b v1.3 --single-branch https://github.com/dell/dellemc-openmanage-ansible-modules cd dellemc-openmanage-ansible-modules # Install the latest version. Run the below command using the sudo or super-user privileges if Ansible is installed using root permission. python install.py NOTE: If previous version of Dell EMC OpenManage Ansible Modules is installed, you are prompted with an upgrade message. Press Y to upgrade to the latest version. NOTE: The above example clones the v1.3 release. 6 Install Dell EMC OpenManage Ansible Modules version 1.3 from GitHub 3 Uninstall Dell EMC OpenManage Ansible Modules version 1.3 when downloaded from GitHub To uninstall Dell EMC OpenManage Ansible Modules version 1.3 when downloaded from GitHub: 1 Navigate to the directory dellemc-openmanage-ansible-modules. 2 Run python uninstall.py. If you are using python version 3.x, then run python3 uninstall.py. Dell EMC OpenManage Ansible Modules version 1.3 is uninstalled successfully. Uninstall Dell EMC OpenManage Ansible Modules version 1.3 when downloaded from GitHub 7
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Dell Create Date : 2019:02:27 12:02:17+00:00 Modify Date : 2019:02:27 12:02:17+00:00 Creator : AH XSL Formatter V6.3 MR3 for Windows (x64) : 6.3.4.25128 (2016/07/01 17:39JST) Producer : Antenna House PDF Output Library 6.3.815 (Windows (x64)) Keywords : Dell EMC OpenManage Ansible Modules, version 1.3, Export-Import-SCP-OpenManage-Ansible, Configure-BIOS-iDRAC-RAID-NIC-OpenManage-Ansible, Configure-syslog-CSIOR-OpenManage-Ansible, Boot to network ISO, OpenManage-Ansible-playbook-github, Installing-Uninstalling-OpenManage-Ansible-Modules Title : Dell EMC OpenManage Ansible Modules Version 1.3 Installation Guide Trapped : False Page Count : 7 Page Mode : UseOutlines Tagged PDF : Yes Language : ENEXIF Metadata provided by EXIF.tools