Opus Controller R3

: Opus Controller R3 opus_controller_r3 images 1163 p4dbimg

Open the PDF directly: View PDF .
Page Count: 2

Human Touch® Opus

Remote Control User Guide

AUTO IMMERSION PROGRAMS

— Four unique auto immersion

programs automatically massage

you for 15 minutes, using a variety of

massage modes.

TARGETED MUSCLE BENEFITS

— Four massage modes let you

customize your massage.

INTENSITY 3D — Set the upper

and lower back 3D massage

intensity independently to soft (I),

medium (II), or intense (III).

POSTURE — Adjust the chair

to a comfortable position.

FOOT — Press to toggle through

two fixed foot massage speeds

and an auto massage program.

BODYMAP® PRO — Push the button

that corresponds to the area where

you want to feel better, and let the

massage chair do the rest!

GO TO ZERO (ONE-STEP

PRESS AND HOLD) — Fully

reclines the backrest and raises

the footrest, placing your body in

a neutral-posture position.

CALF — Press to toggle through

two fixed calf massage speeds

and an auto massage program.

FRONT

Human Touch® Opus

Remote Control User Guide

RANGE — Choose from seven

settings to personalize your

vertical massage range.

ARM — Activates the arm massage.

To access, simply pull up on the arm

massage wells, which can also be

pressed down for a streamlined

appearance when not in use.

STOP/PARK/RESTORE —

Press and hold to retract the

footrest and return the chair

to the upright position.

ZONE — Targets your massage to

a six-inch zone. Use the Position

buttons to focus your massage on

the desired area.

SHOULDER — Activates the

shoulder massage.

POSITION — Use this button, along

with any stationary massage mode,

to set the massage head to the

desired position on the backrest.

AIR SEAT MASSAGE — Activates the

unique seat massage, which uses two

rows of rapidly inflating/deflating

air cells and a layer of Visco foam to

create a precision seat massage.

WIDTH — Focus or diffuse massage

pressure by selecting the wide, medium,

or narrow setting. This feature works

with Flex and Ease massage modes.

Select the width setting after selecting a

massage mode.

BACK WARM AIR — Activates the

warm air lumbar heat. NOTE: After

deactivating the heat, the LED turns off

but the fan continues to run to cool down

the heater. This is normal.

VIBRATION — Activates the foot vibration.

For more detailed operation instructions,

please see the Use and Care Manual.

SIDE