D83a Copernicus2 Np Cover 0 PPM63M7
User Manual: PPM63M7
Open the PDF directly: View PDF 
.
Page Count: 69
| Download | |
| Open PDF In Browser | View PDF |
PDP-MONITOR Chassis : D83A(NP_FHD)_Copernicus2 Model : PPM63M7FSX/EDC SERVICE PDP-MONITOR Manual CONTENTS 1. Precaution 2. Product Specification 3. Disassembly & Reassembly 4. Troubleshooting 5. Exploded View & Part List 6. Wiring Diagram 7. Schematic Diagram PPM63M7FS Refer to the service manual in the GSPN (see the rear cover) for the more information. GSPN (Global Service Partner Network) Area Web Site North America service.samsungportal.com Latin America latin.samsungportal.com CIS cis.samsungportal.com Europe europe.samsungportal.com China china.samsungportal.com Asia asia.samsungportal.com Mideast & Africa mea.samsungportal.com This Service Manual is a property of Samsung Electronics Co.,Ltd. Any unauthorized use of Manual can be punished under applicable International and/or domestic law. © Samsung Electronics Co.,Ltd. Dec. 2007 Printed in Korea AA82-04956A Table of Contents 1. Precaution 1-1 1-2 1-3 1-4 Safety Precautions.......................................................................................................................................................1-1 Servicing Precautions...................................................................................................................................................1-3 Static Electricity Precautions........................................................................................................................................1-4 Installation Precautions................................................................................................................................................1-5 2. Product Specification 2-1 Product Specification....................................................................................................................................................2-1 2-2 Specifications Analysis.................................................................................................................................................2-3 2-3 Accessories..................................................................................................................................................................2-4 3. Disassembly & Reassembly 3-1 Overall Disassembly & Reassembly.............................................................................................................................3-1 4. Troubleshooting 4-1 Troubleshooting............................................................................................................................................................4-1 4-2 Adjustment....................................................................................................................................................................4-13 4-3 Upgrade........................................................................................................................................................................4-27 5. Exploded View & Part List 5-1 PPM63M7FSX/EDC Exploded View.............................................................................................................................5-1 5-2 PPM63M7FSX/EDC Service Item................................................................................................................................5-3 6. Wiring Diagram 6-1 Overall Wiring...............................................................................................................................................................6-1 7. Schematic Diagram 7-1 Circuit Description........................................................................................................................................................7-1 7-2 Schematic Diagram......................................................................................................................................................7-3 Precaution 1. Precaution To avoid possible damage, electric shocks or exposure to radiation, follow the instructions below with regard to safety, installation, service and ESD. 1-1 Safety Precautions 1. Make sure all protective devices are properly installed including non-metallic handles and compartment covers when installing or re-installing the chassis or chassis assemblies. 2. Make sure that no gaps exist between the cabinets for children to insert their fingers in to prevent children from receiving electric shocks. Gaps mentioned above include ventilation holes of a too great magnitude between the PDP module and the cabinet mask, and the improper installation of the rear cabinet. Errors may occur when the resistance is below 1.0㏁ or over 5.2㏁. In these cases, make sure that the device is repaired before sending it back to the customer. 3. Check for Electricity Leakage (AC Leakage Test) Warning: Do not use an insulated transformer for checking the leakage. Use only those current leakage testers or mirroring systems that comply with ANSIC 101.1 and the Underwriter Laboratory’s specifications (UL1410, 59.7). LEAKAGE (READING CURRENT SHOULD NOT BE TESTER ABOVE 0.5mA) DEVICE UNDER TEST TEST ALL EXPOSED METAL SURFACES 2-WIRE CORD ALSO TEST WITH PLUG REVERSED (USING AC ADAPTER PLUG AS REQUIRED) EARTH GROUND 4. A high voltage is maintained within the specified limits using safety parts, calibration and tolerances. When voltage exceeds the specified limits, check each special part. 5. Warning for Engineering Changes: Never make any changes or additions to the circuit design or the internal part for this product. Ex: Do not add any audio or video accessory connectors. This might cause physical damage. Furthermore, any changes or additions to the original design/engineering will invalidate the warranty. 6. Warning - Hot Chassis: Some Monitor chassis are directly connected to one end of the AC power cord for electrical reasons. Without insulated transformers, the product can only be repaired safely when the chassis is connected to the earthed end of the AC power source. To make sure the AC power cord is properly connected, follow the instructions below. Use the voltmeter to measure the voltage between the chassis and the earthed ground. If the measurement is over 1.0V, unplug the AC power cord and change the polarity before reinserting it. Measure the voltage between the chassis and the ground again. 7. Some Monitor chassis are shipped with an additional secondary grounding system. The secondary system is adjacent to the AC power line. These two grounding systems are separated in the circuit using an unbreakable/unchangeable insulation material. 8. When any parts, material or wiring appear overheated or damaged, replace them with new regular ones immediately. When any damage or overheating is detected, correct this immediately and make a regular check of possible errors. Samsung Electronics 1-1 Precaution 9. Check for the original shape of the lead, especially that of the antenna wiring, any sharp edges, the AC power and the high voltage power. Carefully check if the wiring is too tight, incorrectly placed or loose. Never change the space between the part and the printed circuit board. Check the AC power cord for possible damages. Keep the part or the lead away from any heat-emitting materials. 10. Safety Indication: Some electrical circuits or device related materials require special attention to their safety features, which cannot be viewed by the naked eye. If an original part is replaced with another irregular one, the safety or protective features will be lost even if the new one has a higher voltage or more watts. Critical safety parts should be bracketed with ( , ). Use only regular parts for replacements (in particular, flame resistance and dielectric strength specifications). Irregular parts or materials may cause electric shock or fire. 1-2 Samsung Electronics Precaution 1-2 Servicing Precautions Warning 1: First carefully read the “Safety Instruction” in this service manual. When there is a conflict between the service and the safety instructions, follow the safety instruction at all times. Warning 2: Any electrolytic capacitor with the wrong polarity will explode. 1. The service instructions are printed on the cabinet, and should be followed by any service personnel. 2. Make sure to unplug the AC power cord from the power source before starting any repairs. (a) Remove or re-install parts or assemblies. (b) Disconnect the electric plug or connector, if any. (c) Connect the test part in parallel with the electrolytic capacitor. 3. Some parts are placed at a higher position than the printed board. Insulated tubes or tapes are used for this purpose. The internal wiring is clamped using buckles to avoid contact with heat emitting parts. These parts are installed back to their original position. 4. After the repair, make sure to check if the screws, parts or cables are properly installed. Make sure no damage is caused to the repaired part and its surroundings. 5. Check for insulation between the blade of the AC plug and that of any conductive materials (i.e. the metal panel, input terminal, earphone jack, etc). 6. Insulation Check Process: Unplug the power cord from the AC source and turn the switch on. Connect the insulating resistance meter (500v) to the AC plug blade. The insulating resistance between the blade of the AC plug and that of the conductive material should be more than 1㏁. 7. Any B+ interlock should not be damaged. If the metal heat sink is not properly installed, no connection to the AC power should be made. 8. Make sure the grounding lead of the tester is connected to the chassis ground before connecting to the positive lead. The ground lead of the tester should be removed last. 9. Beware of risks of any current leakage coming into contact with the high-capacity capacitor. 10. The sharp edges of the metal material may cause physical damage, so protect yourself by wearing gloves during the repair. 11. Due to the nature of plasma display panels, partial after-images may appear if a still picture is displayed on the screen for a long period of time. This is caused by brightness deterioration due to the storage effect of the panel, and to prevent this from happening, we recommend that the brightness and contrast are reduced. (e.g.) Contrast: 25, Brightness: 50 Samsung Electronics 1-3 Precaution 1-3 Static Electricity Precautions 1. Some semi-conductive (“solid state”) devices are vulnerable to static electricity. These devices are known as ESD. ESD includes the integrated circuit and the field effect transistor. To avoid any materials damage from electrostatic shock, follow the instructions described below. 2. Remove any static electricity from your body by connecting the earth ground before handling any semi-conductive parts or assemblies. Alternatively, wear a dischargeable wrist-belt. (Make sure to remove any static electricity before connecting the power source - this is a safety instruction for avoiding electric shock) 3. Remove the ESD assembly and place it on a conductive surface such as aluminum foil to prevent accumulating static electricity. 4. Do not use any Freon-based chemicals. Such chemicals will generate static electricity that causes damage to the ESD. 5. Use only grounded-tip irons for soldering purposes. 6. Use only anti-static solder removal devices. Most solder removal devices do not support an anti-static feature. A solder removal device without an anti-static feature can store enough static electricity to cause damage to the ESD. 7. Do not remove the ESD from the protective box until the replacement is ready. Most ESD replacements are covered with lead, which will cause a short to the entire unit due to the conductive foam, aluminum foil or other conductive materials. 8. Remove the protective material from the ESD replacement lead immediately after connecting it to the chassis or circuit assembly. 9. Take extreme caution in handling any uncovered ESD replacements. Actions such as brushing clothes or lifting your leg from the carpet floor can generate enough static electricity to damage the ESD. CAUTION These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. 1-4 Samsung Electronics Precaution 1-4 Installation Precautions 1. For safety reasons, more than two people are required for carrying the product. 2. Keep the power cord away from any heat emitting devices, as a melted covering may cause fire or electric shock. 3. Do not place the product in areas with poor ventilation such as a bookshelf or closet. The increased internal temperature may cause fire. 4. Bend the external antenna cable when connecting it to the product. This is a measure to protect it from being exposed to moisture. Otherwise, it may cause a fire or electric shock. 5. Make sure to turn the power off and unplug the power cord from the outlet before repositioning the product. Also check the antenna cable or the external connectors if they are fully unplugged. Damage to the cord may cause fire or electric shock. 6. Keep the antenna far away from any high-voltage cables and install it firmly. Contact with the high-voltage cable or the antenna falling over may cause fire or electric shock. 7. When installing the product, leave enough space (4”) between the product and the wall for ventilation purposes. A rise in temperature within the product may cause fire. 8. When moving a PDP with removable speakers, detach the speakers first before moving the main body. Moving the PDP main body without separating the speakers may cause the speakers to detach, possibly causing damage or injury. Samsung Electronics 1-5 MEMO 1-6 Samsung Electronics Product Specification 2. Product Specification 2-1 Product Specification Features Block Specification PDP Module Samsung SDI WF2 FHD (S63FH-XB01) Power Input Voltage : AC 100~240V, 50/60Hz Video Sound Scaler SVP-WX68 Video Decoder Sound AMP NTP-3000 Audio Codec SGTV5810 Cabinet M7 Design Specification Model PPM63M7FS Dimensions (WxDxH) 1502.7 x 893.1 x 99.0 mm Weight 83.1 kg PC Resolution 1920 x 1080 Screen Size 63 inches (16:9) Colour System PAL/SECAM/NTSC(NT3.58/NT4.43) Sound Stereo, SRS TS XT Audio output power 10W + 10W VIDEO input A/V IN S-VHS Input Component Input : 480i / 480p / 720p / 1080i / 1080p DVI Input : VGA to SXGA (75Hz) HDMI Input : 480p / 720p / 1080i / 1080p PC Input (D-Sub 15pin) : VGA to UXGA(60Hz) BNC (R/G/B/H/V) Input : VGA to UXGA(60Hz) VIDEO output VIDEO OUT - VIDEO/L/R (RCA, 3P) PC Output (D-Sub 15pin) : VGA to UXGA(60Hz) AUDIO input VIDEO IN - L/R COMPONENT IN - L/R (RCA, 2P) AUDIO (Stereo jack for RGB1/2(PC1/2) and DVI input) Audio Output EXT SPEAKER (8Ω) - R+/-, L+/- External control RS232C - IN/OUT (D-SUB, 9P) Samsung Electronics 2-1 Product Specification ■ Display Modes Both screen position and size will vary depending on the type of PC monitor and its resolution. The resolutions in the table are recommended. (All resolutions between the supported limits are supported) 1) D-Sub/DVI Input 640X350 Horizontal Frequency (kHz) 31.5 Vertical Frequency (Hz) 70 720X400 31.5 70 640X480 31.5 60 640X480 37.9 72 640X480 37.5 75 640X480 43.3 85 800X600 37.9 60 800X600 48.1 72 800X600 46.9 75 800X600 53.7 85 1024X768 48.4 60 1024X768 56.5 70 1024x768 60 75 1024X768 68.7 85 1152X864 67.5 75 1280x960 60 60 Resolution 1280x960 75.1 75 1280X1024 64 60 1280X1024 74.6 70 1280X1024 78 75 1280X1024 91.1 85 1600X1200 75 60 1920x1080P 67.5 60 PC DVI X X X X X X 2) HDMI Input IBM 640X480 Horizontal Frequency (kHz) 31.5 480p 720x480 31.5 60 Resolution 576p 720p 1080i 1080p - 2-2 Vertical Frequency (Hz) 60 720x576 31.3 50 1280x720 37.5 50 1280x720 45.0 60 1920x1080i 28.1 50 1920x1080i 33.7 60 1920x1080P 27.0 24 1920x1080P 28.1 25 1920x1080P 33.8 30 1920x1080P 56.3 50 1920x1080P 67.5 60 HDMI The interlace mode is not supported. The set might operate abnormally if a non-standard video format is selected. Separate and Composite modes are supported. SOG is not supported. HDMI is supported for DTV signals only. Samsung Electronics Product Specification 2-2 Specifications Analysis ※ : application, : non-application Model PPM63M7FB PPM50M7HB PPM42M7HB Display Type PDP MONITOR PDP MONITOR PDP MONITOR Resolution 1920x1080 1365 x 768 1024 x 768 Design Basic Picture Audio Features Connections PDP Module WF2 W2A V5 Screen Size 63 inches 50 inches 42 inches Picture ratio 16 : 9 16 : 9 16 : 9 Dimensions (WxHxD) 1502.7 x 893.1 x 99.0 mm 1204 x 96.6 x 724.1 mm 1027 x 96.5 x 630.5 mm Weight 83.1 Kg 41.0 Kg 35 Kg Brightness 1300 Cd/m2 1300 Cd/m2 1100Cd/m2 Contrast Ratio 10000:1 10000:1 5000:1 Picture Enhacer FBE2X FBE FBE Equalizer Auto Volume Control Surround Sound SRS TruSurround XT SRS TruSurround SRS TruSurround Speaker Output 10W + 10W 10W + 10W 10W + 10W PIP Double Screen TTX Still Image My Color Control Color Weakness Energy Saving Screen Burn Protection CVBS 1 AV 1 Composite Output 1 AV 1 Composite Output 1 AV 1 Composite Output S-Video 1 Input 1 Input 1 Input Component (Y/PB/PR) 1 Input 1 Input 1 Input PC (D-SUB) 1 Input/1 output 1 Input/1 output 1 Input/1 output DVI HDMI Scart Optical Coaxial ※ For the power supply and power consumption, refer to the label attached to the product. Samsung Electronics 2-3 Product Specification 2-3 Accessories Accessories that can be purchased additionally Supplied Accessories Accessories 2-4 Item Item code Remote Control Batteries BN59-00656A 4301-000103 Power Cord 3903-000042 Owner’s Instructions BN68-01364B Warranty Card Registration Card Safety Guide Manual BN68-00514E AA68-03575F AA68-03242K Ferrite Cores for Speaker Wire (2EA) 3301-001201 PC Cable BN39-00115A S-VIDEO Cable 1200mm BN39-00149A DVI cable 3000mm BN39-00643A Component Cables (RCA) 1500mm BN39-00279A PC Audio Cable 2000mm BN39-00061B Remark Samsung Service center Electronics Store/ Internal shopping mall Samsung Electronics Disassembly & Reassembly 3. Disassembly & Reassembly 3-1 Overall Disassembly & Reassembly Notice - Be sure to separate the power cord before disassembling the unit. - Discharge the capacitors first when separating PCB’s with high capacity capacitors such as SMPS, X Main Board, Y Main Board, etc. (A spark may be generated by the electric charge, and there is danger of electronic shock.) - Check that the cables are properly connected referring to the circuit diagram when disassembling or assembling the unit taking care not to damage the cables. - Take care not to scratch the Glass Filter in the front. - Assemble the boards in the reverse order of the disassembly. - The plasma must be layed down on a flat padded surface for disassembly and reassembly. 3-1-1 Separation of ASSY STAND P-BASE Part Name Stand Description Description Photo ① Remove 4 screws. : PH,+,WSP,S,M4,L35,ZPC(BLK) ② Pull the stand down to remove it from the unit. Please lay the PDP unit face down on a soft surface when removing the stand. 3-1-2 Separation of ASSY BRACKET P-TERMINAL Part Name Description Bracket Terminal ① Remove the 8 screws on the Bracket Terminal. ( ) : WSP,PH,+,M4,L8,ZPC(YEL),SWRCH1 Description Photo ② Remove the 8 Hex nuts for the PC input. ( ) : M3,L6,NI PLT,SUM24L,#4-40 ③ Remove Bracket Terminal. ④ Remove the 2 screws on the Bracket Terminal. ( ) : BH,+,-,M3,L8,ZPC(BLK) Samsung Electronics 3-1 Disassembly & Reassembly 3-1-3 Separation of ASSY COVER P-REAR Part Name Cover Rear Description Description Photo ① Remove 18 screws. ( ) : BH,+,-,S,M4,L8,ZPC(BLK) ② Remove 2 screws. ( : M8,L16,ZPC(BLK) ) ③ Remove 11 screws. ( ) : M8,L168,ZPC(BLK),SWRCH18A,WP ④ Remove the Cover Rear. 3-1-4 Separation of ASSY PCB MISC-PC MAIN & AV SUB Part Name Description Description Photo PC MAIN ① Detach all connectors from the Main & AV SUB Board. Board ② Remove 7 screws. : PH,+,WWP,M3,L8,NI PLT ③ Remove the PC MAIN and AV SUB Board. 3-1-5 Separation of FILTER-EMI AC LINE Part Name FILTER EMI AC LINE Description Description Photo ① Detach connector from SMPS. ② Remove 2 screws. ( ) : FH,+,M3,L10,NI PLT,SWRCH18A,FP, ③ Remove a screw. ( ) : BH,+,S,M4,L8,ZPC(YEL) ④ Remove FILTER-EMI AC LINE. 3-2 Samsung Electronics Disassembly & Reassembly 3-1-6 Separation of ASSY COVER P-REAR SUB Part Name Description CoverRear Sub ① Remove 3 screws. : BH,+,S,M4,L16,ZPC(BLK),SWRCH18A Description Photo ② Remove 3 screw. : WSP,PH,+,M4,L8,ZPC(YEL),SWRCH1 ③ Remove the Cover-Rear Sub. 3-1-7 Separation of ASSY PCB MISC-CONTROL Part Name Control Board Description Description Photo ①Remove 3 screws. : RH,+,B,M4,L15,ZPC(BLK),SWRCH18 ② Remove the Control Board. Samsung Electronics 3-3 Disassembly & Reassembly 3-1-8 Separation of ASSY PCB P-SMPS Part Name SMPS Description Description Photo ① Detach all connectors from the SMPS. ② Remove 8 screws. : PH,+,WWP,M3,L8,NI PLT,SWRCH18A ③ Remove the SMPS. Wear gloves when handling the power board as there may be some remaining electrical charge in the capacitor. Specifically, avoid touching any part of the capacitor. 3-1-9 Separation of ASSY PDP MODULE P-LOGIC MAIN BOARD Part Name Logic Board Description Description Photo ① Detach all connectors from the Logic Main Board. ② Remove 4 screws. : PH,+,WWP,M3,L8,NI PLT,SWRCH18A ③ Remove the Logic Main Board. 3-4 Samsung Electronics Disassembly & Reassembly 3-1-10 Separation of ASSY PDP MODULE P-X MAIN & BUFFER BOARD Part Name Description Description Photo Flat Cable ① Detach all Connectors from the X-Buffer Board. ※ To separate the Flat Cable of the X-Buffer Board, press the upper and the lower sides of the connector. X-Main Board ① Remove 6 screws. : PH,+,WWP,M3,L8,NI PLT,SWRCH18A, ② Remove the X-Main Board. X-Buffer Upper & Lower Board ① Remove 6 screws. : PH,+,WWP,M3,L8,NI PLT,SWRCH18A, ② Remove the X-Buffer Upper & Lower Board. Samsung Electronics 3-5 Disassembly & Reassembly 3-1-11 Separation of ASSY PDP MODULE P-Y MAIN & BUFFER BOARD Part Name Description Description Photo Flat Cable ① Detach the 6 scan board connectors from the panel by pulling the holder from both the top and bottom ends. Y-Main Board ① Detach all connectors from the Y-Main Board. ② Remove 9 screws. : PH,+,WWP,M3,L8,NI PLT,SWRCH18A, ③ Remove the Y-Main Board. Y-Buffer Upper & Lower Board 3-6 ① Remove 8 screws. : PH,+,WWP,M3,L8,NI PLT,SWRCH18A ② Remove the Y-Buffer Upper & Lower Board. Samsung Electronics Disassembly & Reassembly 3-1-12 Separation of ASSY PDP MODULE P-ADDRESS BUFFER BOARD Part Name Description Wall Bracket ① Remove 12 screws. : PH,+,WWP,M5,L12,NI PLT,SWRCH18A Description Photo ② Remove the Wall Bracket. Guide Stand ① Remove 8 screws. (L/R) : PH,+,WWP,M5,L12,NI PLT,SWRCH18A ② Remove the Guide Stands. Upper Adrress Buffer Board ① Detach the all connectors from the buffer board. ② Remove 12 screws. : PH,+,WWP,M3,L8,NI PLT ③ Remove the E, F, G-Buffer Board. Lower Adrress Buffer Board ① Detach the all connectors from the buffer board. ② Remove 12 screws. : PH,+,WWP,M3,L8,NI PLT ③ Remove the E, F, G-Buffer Board. Samsung Electronics 3-7 MEMO 3-8 Samsung Electronics Troubleshooting 4. Troubleshooting 4-1 Troubleshooting 4-1-1 First Checklist for Troubleshooting 1. Check the various cable connections first. - Check to see if there is a burnt or damaged cable. - Check to see if there is a disconnected or loose cable connection. - Check to see if the cables are connected according to the connection diagram. 2. Check the power input to the Main Board. 3. Check the voltage in and out between the SMPS ↔ Main Board, between the SMPS ↔ X, Y Main Board, and between the Logic Boards. Samsung Electronics 4-1 Troubleshooting 4-1-2 Checkpoints by Error Mode ■ No Power Symptom - The LEDs on the front panel do not work when connecting the power cord. - The SMPS relay does not work when connecting the power cord. - The power of the unit seems to be out of order. Major Checklist The SMPS relay or the LEDs on the front panel does not work when connecting the power cord if the cables are improperly connected or the Main Board or SMPS is not functioning. In this case, check the following: - Check the internal cable connection. - Check the fuses. - Check the output voltages of the SMPS. - Replace the Main Board. ② ① Troubleshooting Procedures ① Are the AC IN socket connector and the Main SMPS CN800 connected? No Yes ① Is the Fuse (F801S) of the Main SMPS Power Input Part blown? No The AC IN socket connector and the Main SMPS CN801 connected Replace Fuse (F801S) Yes ② Main SMPS CN801 Pin 3 : STB 5V Pin 1 PS-ON : Check to see if it is 0V No Replace the Main SMPS Yes Replace the Main Board 4-2 Samsung Electronics Troubleshooting ■ When the unit is repeatedly turning on and off Symptom - The SMPS relay is repeatedly turning on and off. Major Checklist In general, the SMPS relay repeatedly turns on and off by the protection function due to a defect on a board connected to the SMPS. - Disconnect all cables from the SMPS, operate the SMPS alone and check if the SMPS works properly and if each voltage output is correct. - If the symptom continues even when SMPS is operated alone, replace the SMPS. - If the symptom is not observed when operating the SMPS alone, find any defective assemblies by connecting the cables one by one. ② ① Troubleshooting Procedures ③ ① Does the symptom continue when connecting the power after removing CN810 from the SMPS? No Replace the Y Main Board No Replace the X Main Board No Replace the Logic Board Yes ② Does the symptom continue when connecting the power after removing CN809 from the SMPS? Yes ③ Does the symptom continue when connecting the power after removing CN807 from the SMPS? Yes Replace the Main SMPS Caution When separating and connecting the cables such as CN807, CN808, CN809, CN810, CN811 of the Main SMPS, CN4000 of the X Main Board, and CN5004 of the Y Main Board, a spark may be generated by the electric charge of the high capacity capacitor. Therefore, wait some time after disconnecting the power cord from the unit. Samsung Electronics 4-3 Troubleshooting ■ No Sound Symptom - Video is normal but there is no sound. Major Checklist - when the speaker connectors are disconnected or damaged. - when the sound processing part of the Main Board is not functioning. - Speaker defect. ② ① Troubleshooting Procedures ③ ③ ① Is the cable connection between the Main Board and the speaker properly connected? No Cable Connection Yes ② Check that the voltage of No.7,8 pin of SMPS CN801 has 18V No Replace the SMPS Yes Is the speaker output terminal of the Main Board normal? No Replace the Main Board Yes ③ 4-4 Replace the Speaker Samsung Electronics Troubleshooting ■ Drive Board Troubleshooting 1) Troubleshooting Summary Condition Name No Voltage Output No Display Abnormal Display Sustain Open Sustain Short Address Open Address Short Samsung Electronics Description Operating Voltage don’t exist Operating Voltage exist, but an Image doesn’t exist on screen Abnormal Image (not open or short) is no screen Some horizontal lines don’t exist on screen Some horizontal lines appear to be linked on screen Some vertical lines don’t exist on screen Some vertical lines appear to be linked on screen Related Board PSU Y-MAIN, X-MAIN, Logic Main, Cable Y-MAIN, X-MAIN, Logic Main Scan Buffer, FPC of X/Y Scan Buffer, FPC of X/Y Logic Main, Logic Buffer, TCP Logic Main, Logic Buffer, TCP 4-5 Troubleshooting 2) Troubleshooting Procedure in Abnormal Conditions ① No Display (Operating Voltage exist, but an doesn’t exist on Screen) ► No Display is related with Y-MAIN, X-MAIN, Logic Main and so on. This page shows you how to check the boards, and the following pages show you how to find the defective board. No Display [ Logic Main ] LED Blinks [ Y-MAIN ] Check necessary points [ Logic Main ] Check if power is supplied ( 5V, 3.3V ) YES NO Check if internal is Default Black Check the MICOM operation Check if any address data output is detected Check the ASIC Control Signal output Check if the data and control signals between DDR & ASIC are normal FUSE OPEN Replace the Board F4001 for VCC F4002 for Vs F4004 for VDD F4005 for Ve Replace the Board Q4002~Q4003 Q4011~Q4016 D4004 D4006~D4008 OK Q5009~Q5021 D5005, D5007 D5008 FET/ DIODE OK Y-MAIN Normal State 4-6 Check the FUSE Check the input voltage If the input voltage is abnormal, replace the PSU and check it again as this indicates a PSU output error [ X-MAIN ] Check several points [ Y-MAIN ] Check several points F5001 for VDD F5002 for Vs F5004 for VCC F5005 for OUT_L NO Check the power connectivity Check the LED operation YES [ X-MAIN ] Check necessary points FUSE OPEN Replace the Board OK SHORT FET/ DIODE SHORT Replace the Board OK X-MAIN Normal State Samsung Electronics Troubleshooting ② Abnormal Display(Abnormal Image is on Screen.(except abnormality in Sustain or Address) ► Abnormal Display is related with Y-MAIN, X-MAIN, Logic Main and so on. This page shows you how to check the boards, and the following pages show you how to find the defective board. Abnormal Display [ Logic Main ] Observation of abnormal display [ Y-MAIN ] Check necessary points [ X-MAIN ] Check necessary points [ Logic Main ] LED Blinks ( action of Vsync ) Regular abnormal pattern NO Logic Main Normal State YES Replace the Board Replace the PDP [ Y-MAIN ] Check several points F5001 for VDD F5002 for Vs F5004 for VCC F5005 for OUT_L FUSE [ X-MAIN ] Check several points OPEN Replace the Board F4001 for VCC F4002 for Vs F4004 for VDD F4005 for Ve FUSE OK Q5009~Q5021 OK Y-MAIN Normal State Samsung Electronics Replace the Board OK SHORT FET OPEN Replace the Board Q4002~Q4003 Q4011~Q4016 SHORT FET Replace the Board OK X-MAIN Normal State 4-7 Troubleshooting ③ Sustain Open (some horizontal lines don’t exist on screen) [ Y-FPC ] Sustain Open After Changing Y-buffer, recheck the status NG Replace the Panel There a defect on FPC OK Done (Defect is from Y-buffer) ④ Sustain Short (some horizontal lines appear to be linked on Video) [ Y-FPC ] Sustain Short (Discharging in unwanted Scan line) After Changing Y-buffer, recheck the status NG Replace the Panel There a defect on FPC OK Done (Defect is from Y-buffer) 4-8 Samsung Electronics Troubleshooting ⑤ Address Open, Short(some vertical lines don’t exist on screen) ►Address Open and Short is related with Logic Main, Logic Buffer, FFC, TCP film and so on. This page shows you how to check the boards, and the following pages show you how to find the defective board. [ Logic Main ] Address Open/Short Check the LED operation Check if the internal mode screen is normal NG NG Check the Video Board OK OK OK NG Reload the data onto the MICOM and recheck it Check if a specific TCP Block screen is displayed abnormally OK Check if there is an open or short circuit on the Buffer Board and the Logic Main address data output section. Check the FFC connection status Check the DDR Vref input power and the Voltage Divider resistance NG Check the detailed waveform and control the signal waveform DONE Check the DDR input voltage (Vref) NG Replace Logic Main / Address Buffer (E or F) / FFC OK NG Replace the Panel Samsung Electronics 4-9 Troubleshooting 4-1-3 Faults and Corrective Actions Symptom A blank vertical cell (block) appears on the screen. Related Image Causes and Countermeasures Address buffer defect - Replace the corresponding upper/lower buffers (E, F or G) COF defect (burnt) - Replace the module A green screen appears when the TV is turned on. The Scale is not reseting - Replace the Main board The OSD box appears but there is no text. Incorrect program version - Check the version of each program - Replace the Main board A blank upper (or lower) block appears on the screen. Upper/Lower Y Buffer defect - Replace the corresponding upper/lower buffers 4-10 Samsung Electronics Troubleshooting Symptom Related Image Causes and Countermeasures Either the main or sub picture does not appear. Replace the Main board A vertical green line appears on the screen. The SMPS voltage is incorrect - Adjust the SMPS voltage according to the voltage printed on the module label Dim screen (blurred in red) X-Main board defect - Replace the X-Main board A blank screen appears - Replace the Y-Main board Samsung Electronics 4-11 Troubleshooting 4-1-4 Troubleshooting Procedures by assembly No Assembly Major Symptoms 1 SMPS-PDP TV No power, Blank screen, the Relay repeats On and Off 2 ASSY PDP MODULE P-X MAIN Blank screen 3 ASSY PDP MODULE P-Y MAIN Blank screen 4 ASSY PDP MODULE P-LOGIC MAIN Blank screen, Screen noise 5 ASSY PDP MODULE P-Y MAIN SCAN UPPER Upper screen is blank 6 ASSY PDP MODULE P-X MAIN SCAN LOWER Lower screen is blank 7 ASSY PDP MODULE P-Y MAIN SCAN UPPER upper screen is blank 8 ASSY PDP MODULE P-Y MAIN SCAN LOWER Lower screen is blank 9 ASSY PDP MODULE P-ADDRESS E BUFFER Corresponding Buffer Board block screen is blank 10 ASSY PDP MODULE P-ADDRESS F BUFFER Corresponding Buffer Board block screen is blank 11 ASSY PDP MODULE P-ADDRSSS G BUFFER Corresponding Buffer Board block screen is blank 12 ASSY PCB MISC-MAIN No Power, Abnormal screen for each input source, PIP screen trouble, Sound trouble 13 ASSY BOARD P-FUNCTION The side function key does not work properly. ① ⑫ ⑬ 4-12 Samsung Electronics Troubleshooting 4-2 Adjustment 4-2-1 Service Instruction ■ Before Performing After Sales Services 1. Check if the measurement and test equipment is working properly. 2. Secure sufficient work space for disassembling the product. 3. Prepare a soft pad for disassembling the product. ■ Service adjustment item after replacement of Board① PDP Option of Factory Mode → set the Factory Data Type item as the suitable value of relevant model. ② Adjust Calibration of Factory Mode for each mode. ③ Adjust White Balance of Factory Mode. ① Write down the value of HDMI White Balance of Factory Mode before replacing Board. ② PDP Option of Factory Mode → set the Factory Data Type item as the suitable value of relevant model. ③ Set the value of HDMI White Balance with the value written down before. Samsung Electronics 4-13 Troubleshooting 4-2-2 How to Access Service Mode 1. General Remote Info Menu To Enter: POWER OFF (Interval between key strokes: less than 3 sec) To Exit: POWER OFF Mute POWER ON POWER ON 2. Factory Remote To Enter: POWER ON To Exit: POWER OFF INFO Factory Key (Interval between key strokes: less than 3 sec) POWER ON Press the Factory key twice with a key stroke interval of more than 1 second (Pressing once enters Aging Mode) 3. Settings when entering Factory mode - Sharp Screen (Dynamic), Color Tone (Cool1), Factory (Dynamic CE Off) 4. Adjustment Procedures - Channel ▲▼ Key : Select an item. : Adjust the value up or down. - Volume ◀▶ Key - MENU Key : Save the changes to the EEPROM and return to the higher-level mode. - Using the Numeric (0~9) keys, you can select a channel. - Using the SOURCE key, you can switch AV modes. 5. Initial SERVICE MODE DISPLAY State Panel On Time (Hour) 00000 1. Calibration 2. Option Table(Service) 3. White Balance 4. SVP-UX 5. Option Block 6. SGTV5810/NTP3000 T-CP2MWWMF-XXXX T-SFRMWWS-XXXX SAFFRON_TR-XXXX SAFFRON Component 7. YC Delay 8. Adjust 9. I2C Check 10. W/B MOVIE 11. Checksum 12. Reset Boot Merge : OK DBG MODE Mon/Day/Year Hout/Min/Sec ※ The version of the firmware displayed at the bottom of the screen may differ and the firmware is subject to change for the improvement of product functions. ※ If you have adjusted the settings in Service Mode, you have to reset the product. 4-14 Samsung Electronics Troubleshooting 4-2-3 Factory Data ♦ The underlined are items applied during the service adjustment. None of the others should be adjusted. 1. Calibration Item Data AV Calibration Failure COMP Calibration Failure PC Calibration Failure HDMI Calibration Failure 2. Option Byte Item Setting option Ready On Inch Option 60” Panel Vender DDR ETRON Panel Type Model Option Saffron PDP filter 50FHD EU MRT Anynet+ OFF Light Effect OFF WM Calib OFF Auto Power OFF Nordic OFF LNA Menu OFF TTX On/Off OFF TTX List OFF Carrier Mute OFF High Devi. OFF Vol. Curve Small HDMI HotPlug 1 HDMI Clk Ctrl 1 HDMI HP Dly 9 Hotel Option Shop Mode OFF Color Space ON PC Ident ON Language English Ch. Table SUWON TTX Group Auto iDTV_Cntry UK PDP Group S5E_DFMA Samsung Electronics 4-15 Troubleshooting 3. White Balance Item Range Sub Brightness 0~255 128 R-Offset 0~255 128 G-Offset 0~255 128 B-Offset 0~255 128 Sub-Contrast 0~255 128 R-Gain 0~255 128 G-Gain 0~255 128 B-Gain 0~255 128 4-16 Samsung Electronics Troubleshooting 4. SVP-PX 1 ComB Filter : Y-Filter - 80H 2 Sharpness Item Data H2gain 18H H4gain 06H V2gain 18H V4gain 06H Sr2gain 00H Sr4gain 00H Sl2gain 00H Sl4gain 00H Peakth1 03H Peakth2 2FHq Sub Color 40H 3 NR Item Data Y_NR_OFF 00H C_NR_OFF 00H Y_NR_ON 00H C_NR_ON 00H 4 RGB Calibration Item R-Offset G-Offset B-Offset R-Gain G-Gain B-Gain Samsung Electronics Data 32H 32H 32H A9H A9H A9H 4-17 Troubleshooting 5 ADC Calibration Item Data TCD3 Contrast 78H TCD3 Brightness 20H TCD3 CR 80H TCD3 CB 80H TCD3 Delay 00H Analog Y Offset 44H Analog PB Offset 44H Analog PR Offset 44H Analog Y Gain AA4H Analog PB Gain ACH Analog PR Gain A7H Black Level 00H Svp Brightness 00H 6 Calibration Target Item Data AV ADC 10H COMP ADC 10H PC ADC 10H ALL RGB 01H 7 Color Management Item Data Skin Direction Reddish Skin Enhance 00H Green Stretch 00H Blue Stretch 00H 8 Sync Control Item Data HSync Tip End 00H VSync AGC Min 00H VSync AGC Max 00H VSync Clamp Mode VSync Thresh 4-18 0 00H Samsung Electronics Troubleshooting 5. Option Block FRC-Micronas FRC2X Item Data OUTCON GAMMA 0 OCC_MODE 0 FALLBACK 0 DBG_MARK 0 SPR_CBR 0 BIT_EXPAND 0 INV_BIT_EXPAND 0 REPEAT_MODE 0 DEMO_ON_OFF 0 MMU_RD_START 00H ME_RD_START 00H MC_RD_START 00H CMZL(0X36E) 0H BLOL(0x36F)` 0H LOGO(0x2A7) 0H FBE2 Item Data Item Data Item Data Pattern Select 0 Mean Slope 112 M Skin Tv 138 BS-On 1 Input Offset 128 Sub Color 135 B-Slope Gain 50 Input Gain 140 M-Au-Sub Color 128 B-Tilt Min 20 ACR Offset 5 M-Wi-Sub Color 128 B-Tilt Max 120 ACR Th1 10 MW-Skin-Tu 138 B-Tilt Slope 128 ACR Th2 110 MW-Skin-Tv 138 LFunc-Basis 70 Skin Enable 1 HFunc-Basis 70 Skin Tu 130 Mean-Offset1 30 Skin Tv 130 Mean-Offset2 235 M Skin Tu 138 PDP Logic CDC Pattern Select Sw 0 OFF Panel Type Panel Inch B1H 63 FHD CDC Strengh Th 1 Panel Version W2 BRE Sw OFF Logic Sw Version 07Y 05M 02D FRC FRC FRC CDC CDC Repeat Mode DBG MarkOn Bypass L Gain U Gain OFF 0 OFF 4 6 Panel Temp. 35 Samsung Electronics 4-19 Troubleshooting 6. SGTV5810/NTP3000 Item Data ID Tone Shift 01H ID Tone Thresh 7FH Demod Prescaler 0EH Master Volume 17H PWM Modulation EAH DRC Threshold 16H Speaker EQ ON 7. YC Delay Item Data RF PAL-B/G 33H RF PAL-D/K 42H RF PAL-I 42H RF SECAM-B/G 42H RF SECAM-D/K 11H RF SECAM-L/L’ 88H RF NTSC 3.58 40H RF NTSC 4.43 CCH AV PAL 77H AV SECAM 49H AV NTSC 3.58 95H AV NTSC 4.43 AAH AV PAL60 77H 8. Adjust Item Data Item Data Video Mute Time 10 D-WatchDog ON Dynamic Contrast ON WatchDOg ON Dynamic Dimming ON UART Select OFF Dynamic CE OFF FBE Select FBE2X Tuner Auto LNA PLUS 4-20 Magazine LNA OFF Tuner Top Semco 10 PixelShift Test OFF Tuner Top Alps 13 Debug MDC D.Gamma Off ACR OFF M.Gamma 0_85 MJC/PDP FRC All On Samsung Electronics Troubleshooting LNA PLUS Item RFDB-1 Level RFDB-2 Level RFDB-3 Level RFDB-4 Level 2 5 6 24 9. I2C Check 10. W/B MOVIE Item Data Item Data Item Data WB Movie OFF W1_BOFFS 110 NO_BOFFS 139 Color Mode Movie W2_RGAIN 138 C2_RGAIN 120 Color Tone Cool1 W2_BGAIN 94 C2_BGAIN 138 MSub Brigh 128 W2_ROFFS 147 C2_ROFFS 135 MSub Contr 128 W2_BOFFS 105 C2_BOFFS 139 W1_RGAIN 136 NO_RGAIN 125 Movie Contr 100 W1_BGAIN 105 NO_BGAIN 121 Movie Brigh 45 W1_ROFFS 155 NO_ROFFS 158 Movie Color 55 Movie Sharp 75 Samsung Electronics 4-21 Troubleshooting 4-2-4 Service Adjustment - You must perform Calibration in the Lattice Pattern before adjusting the White Balance. ■ Color Calibration Adjust spec. 1. Source: Component 2. Setting Mode: 1920x1080@60Hz 3. Pattern: Pattern #24 (Chess Pattern) 4. Use Equipment : CA210 & Master MSPG925 Generator ※It is no Calibration necessuty in DVI, AV, PC mode ( Chess Pattern ) ※Use other equipment only after comparing the result with that of the Master equipment. Input mode Calibration Pattern Component IN (Model_#6) Perform in 1080p B&W Pattern #24 Lattice ■ Method of Color Calibration (Component) 1) 2) 3) 4) 5) 6) 7) 8) 4-22 Apply the 1080p Lattice (N0. 6) pattern signal to the Component IN 1 port Press the Source key to switch to “Component1” mode Enter Service mode Select the “Calibration” menu Select the “Comp Calibration” menu. In “Comp Calibration Off” status, press the “▶” key to perform Calibration. When Calibration is complete, it returns to the high-level menu. You can see the change of the “Comp Calibration” status from Failure to Success. Samsung Electronics Troubleshooting ■ White Balance Adjust spec. 1. Source: DVI 2. Setting Mode: 1920*1080@60Hz 3. Pattern: Pattern #92 4. Use Equipment: MIK-7256 (MSPG925L) ( SAMSUNG WHITE BALANCE Adjustment PATTERN with FPD ) 5. Work order 1 Connect DVI output terminal of MIK-7256 (MSPG925L) to the HDMI input in main set 2 Set the input to DVI mode 3 Enter the White Balance menu of service mode 4 Contact CA-210 sensor to glass filter ( Fixed Position of CA210 Probe ) 5 Adjust the low light -Adjust Sub-Bright (LBE) to set the ‘Y’ value -Adjust R-Offset (‘x’) and B-Offset (‘y’) to the color coordinates. * Do not adjust G-Offset data 6 Adjust the high light. -Adjust R-Gain (‘x’) and B-Gain (‘y’) to the color coordinates. * Do not adjust the G-gain data, Sub-Contrast data. Samsung Electronics 4-23 Troubleshooting (CA-210) Input mode CVBS(PAL) COMP(1080P) DVI(1080P) x x Y(fL) T(K), MPCD H/L 278 285 - 10,500 ( ± 0) L/L 278 285 3.2 10,500 ( ± 0) H/L 278 285 - 10,500 ( ± 0) L/L 278 285 3.0 10,500 ( ± 0) H/L 278 285 - 10,500 ( ± 0) L/L 278 285 3.0 10,500 ( ± 0) 4-2-5 Replacements & Calibration * Check items listed after changing each Replaced assembly items Check Items ASSY PCB MISC-MAIN ① Auto Program ② White Balance Adjust ASSY PCB P-SMPS Vs, Va voltage check and adjust ASSY PDP MODULE P-X MAIN ASSY PDP MODULE P-Y MAIN ASSY PDP MODULE P-LOGIC MAIN ASSY PDP MODULE P-X MAIN SCAN UPPER ASSY PDP MODULE P-X MAIN SCAN LOWER ASSY PDP MODULE P-Y MAIN SCAN UPPER Not to be adjusted ASSY PDP MODULE P-Y MAIN SCAN LOWER ASSY PDP MODULE P-ADDRESS E-BUFFER ASSY PDP MODULE P-ADDRESS F-BUFFER ASSY PDP MODULE P-ADDRSSS G-BUFFER ※ When replacing the SMPS or PDP panel, you have to check the voltage printed on the panel sticker and adjust it. 4-24 Samsung Electronics Troubleshooting ■ Voltage Adjustment 1. After replacing the SMPS or PDP panel, you must adjust the voltage referring to the voltage label printed on the panel. (If you do not adjust the voltage, an abnormal discharge symptom may appear.) Value Vs 205 Va 65 Vset 205 Ve 120 Vsc -185 Board Adjustment SMPS Voltage Label SMPS-MAIN 2. A point of adjusting SMPS-MAIN voltage. Va Adjustment Va Test Point Ve Test Point Ve Adjustment Vsc Adjustment Vsc Test Point Vs Adjustment Vs Test Point Samsung Electronics 4-25 Troubleshooting ■ Y-RR and Y-FR controls Test Point Test Point Set the main reset (rising : 60usec, falling : 80usec) by change the value of variable resistor. 60usec Rising ramp variable resistor 60usec Rising ramp variable resistor Falling ramp variable resistor Falling ramp variable resistor 80usec 80usec 4-26 Samsung Electronics Troubleshooting 4-3 Upgrade 4-3-1 How to update software 1. Preparing Items - Computer for downloading, PDP Monitor, RS232 cable (Female to Female, twisted pin no.2 – pin no.3) 2. Install the download program - Execute a file “2M FlashDownloader Setup.exe” Click “NEXT” Samsung Electronics 4-27 Troubleshooting Click “NEXT” Proceeding..... Click “FINISH” 4-28 Samsung Electronics Troubleshooting 3. Following below steps to Update (start when disconnect a power cord) 1 Connect RS-232 IN jack and PC with RS-232 Cable. 2 Excute a program “2MB Flash Downloader Ver 0.9”. 3 Select Flash Size “2MB (M32C)”. 4 Click "Open" and select Software code file “T-CP2MWWMF-1001.0.mot”. 5 Click “Connect”. 6 Connect power cord. Samsung Electronics 4-29 Troubleshooting 7 Click “Program and Verify” to update software code when program is “Ready” (it takes almost 10 minites.) 8 Complete. 9 Disconnect power cord to reset a SET. Connect a power cord and power on after 1 second. 0 Restart first step, if you have any error when Downloading. 4-30 Samsung Electronics MEMO Samsung Electronics 4-31 T0003 5-1 T0057 T0022 T0003 T0074 T0061 T0456 T0098 T0097 T0096 T0268 T0918 T0098 T0044 T0918 T0159 T0077 FT532 T0312 T0079 T0112 T0219 T0001 T0256 Exploded View & Part List 5. Exploded View & Part List 5-1 PPM63M7FSX/EDC Exploded View Samsung Electronics Exploded View & Part List Loc. No. Code No. Description Specification Q’ty FT532 T0001 T0003 T0003 T0022 2901-001363 BN96-00308D BN96-04993C BN64-00622C BP64-00045F FILTER-EMI AC LINE ASSY COVER P-BACK ASSY COVER P-FRONT CABINET FRONT KNOB CONTROL 250V,10A,-,0.22uF/220 63M7F VMB,,AL T1.5,,DG 63M7,,ABS HB,,GR-806P 63M7,ABS,-,-,-,HB,GR-806P, 42M5,ABS,HB,GR-806P 1 1 1 1 1 S.A S.A S.A S.N.A S.N.A T0044 BN96-06421A ASSY PDP MODULE P S63FH-XB01,PL63FH001B, 1 S.A T0057 T0061 T0074 T0077 T0079 T0096 T0097 T0098 T0098 T0112 AA64-04421A BN64-00074B BN59-00656A BN96-01632B BN94-01427H BN96-00305B BN96-00306B BN96-00307B BN94-00532J BN63-00470B LOGO-BADGE WINDOW-REMOCON REMOCON ASSY SHIELD P-FUNCTION ASSY PCB MISC-MAIN ASSY MISC P-FILTER TOP ASSY MISC P-FILTER BTM ASSY MISC P-FILTER SIDE ASSY PCB MISC-CONTROL COVER-BACK Z50,AL,1.4,3.4g,80mm,SILVER,S 42P3S,PMMA,,,,,,CLEAR PPM63M7F,TM-75,ZILOG 52MX,37,TTX 63M7F,AL,T1.0 PPM63M7FSX/EDC,FULL SPD-63P3H,AL,T2.0 SPD-63P3H,AL,T2.0 SPD-63P3H,AL,T2. PPM63H3QX/XAA,D63B 63P3,AL,T1.5,DGM5233 1 1 1 1 1 1 1 2 1 1 S.N.A S.N.A S.A S.N.A S.A S.A S.A S.N.A S.A S.N.A T0159 BN96-03736A ASSY PCB P-SMPS -,-,-,-,-,245*445mm 1 S.A T0219 T0256 T0268 T0312 BN94-00930A BN64-00153B 3903-000042 BN96-00302E ASSY PCB MISC-AV SUB DECORATION-BACK CBF-POWER CORD ASSY COVER P-REAR SUB 42M6,D74C SPD-63P3H,ABS+PC,3.0,5V DT,EU,FP3/YES,IEC320 C13/ 63M6H,,AL T1.5,,, 1 1 1 1 S.A S.N.A S.A S.A T0456 BN67-00191A GLASS-FILTER EMI 63” W2 FHD,MRT,44%,1442 1 S.A T0918 T0918 AA60-00110L AA60-00110M SPACER-FILTER SPACER-FILTER 63P3H,P/U FROM,1420,6.0,9. 63P3H,P/U FROM,810,9.0,8.0 2 2 S.N.A S.N.A Samsung Electronics SA/SNA Remark 5-2 Exploded View & Part List 5-2 PPM63M7FSX/EDC Service Item ※ This is the list which is available to repair the real material at the time of service. Loc. No. Code No. Description Specification M0114 M2893 M2893 T0001 T0003 BN39-00115A BN39-00802C BN39-00843B BN96-00308D BN96-04993C CBF SIGNAL LEAD CONNECTOR LEAD CONNECTOR-LVDS ASSY COVER P-BACK ASSY COVER P-FRONT NL5MO,15P/15P,2990,1830MM,UL2 HPT4264H,UL1617#22,24P/24 SPD-63P71FHD,UL20276 63M7F VMB,,AL T1.5,,DG 63M7,,ABS HB,,GR-806P 1 1 1 1 1 T0037 BN96-04877A ASSY PDP P-LOGIC MAIN PL63FH001A,S63FH-X 1 T0038 T0039 T0040 T0044 BN96-04878A BN96-04879A BN96-04880A BN96-06421A ASSY PDP P-ADDRESS E-BUFFER ASSY PDP P-ADDRESS F-BUFFER ASSY PDP P-ADDRESS G-BUFFER ASSY PDP MODULE P PL63FH001A,S PL63FH001A,S PL63FH001A,S S63FH-XB01,PL63FH001B, 1 1 1 1 T0074 T0079 BN59-00656A BN94-01427H REMOCON ASSY PCB MISC-MAIN PPM63M7F,TM-75,ZILOG 52MX,37,TTX PPM63M7FSX/EDC,FULL 1 1 T0159 BN96-03736A ASSY PCB P-SMPS -,-,-,-,-,245*445mm 1 T0160 BN96-04871A ASSY PDP P-X-MAIN PL63FH001A,S63FH-XB01, 1 T0161 BN96-04872A ASSY PDP P-X-MAIN SCAN UPPER PL63FH001A, 1 T0162 T0163 T0164 T0165 T0312 BN96-04873A BN96-04874A BN96-04875A BN96-04876A BN96-00302E ASSY PDP P-X-MAIN SCAN LOWWER ASSY PDP P-Y-MAIN ASSY PDP P-Y-MAIN SACN UPPER ASSY PDP P-Y-MAIN SACN LOWWER ASSY COVER P-REAR SUB PL63FH001A PL63FH001A,S63FH-XB01, PL63FH001A, PL63FH001A 63M6H,,AL T1.5,,, 1 1 1 1 1 5-3 Q’ty Remark Samsung Electronics Wiring Diagram 6. Wiring Diagram 6-1 Overall Wiring Y-BUFFER(UP) CN2707 CN2706 CN2708 CN2705 G-BUFFER CN2704 CN2703 CN2607 CN2701 CN2700 CN2606 CN2601 CN2605 CN2604 CN2603 CN2602 F-BUFFER CN2507 CN2500 CN2600 CN2506 CN2505 CN2508 CN2502 CN2504 CN2503 E-BUFFER CN5401 4 2 CN810 CN5400 CN5004 CN5408 CN5006 CN5411 CN5003 CN5402 CN5410 CN5510 CN5511 CN800 CN5005 CN5012 CN801 CN5002 10 CN2010 CN2009 CN2001 CN2008 LOGIC BOARD 6 CN2006 CN5502 E-BUFFER CN2503 CN4016 5 CN811 CN807 X-MAIN 3 CN5500 Y-BUFFER(LOW) CN4014 CN4000 CN808 Y-MAIN CN5501 CN5508 1 CN809 SMPS CN2504 CN2508 CN2505 CN2502 CN2506 CN2003 CN2002 8 CN2005 CN2600 CN2500 CN2602 CN2507 CN2603 7 FUNCTION CN4001 CN4017 CN2000 CN2007 F-BUFFER CN2604 CN2605 CN2203_FHD CN1101 AC-INLET CN4015 CN2004 CN2601 CN2606 CN2607 CN2701 CN2703 CN2700 CN2704 G-BUFFER CN2705 CN2706 CN2708 CN2707 MAIN BOARD CN1401 CN1203 9 SPEAKER Samsung Electronics 6-1 Wiring Diagram ※ The code number of cable(Lead-connector) can be changed, see “5. Exploded View & Part List.” No. Use Code 1 LVDS BN39-00843C 2 POWER BN39-00802C 3 AC_INPUT 2901-001363 6-2 Photo Samsung Electronics Wiring Diagram 6-1-1 Pin Connection 1 CN809(SMPS) ↔ CN4000(X Board) 2 CN810(SMPS) ↔ CN5004(Y Board) 3 CN807(SMPS) ↔ CN2001(Logic Board) 4 CN808(SMPS) ↔ CN2508(E-BUFFER) 5 CN811(SMPS) ↔ CN2708(G-BUFFER) Pin Description 1 Vs Pin No. Signal Pin No. Signal Pin No. Signal Pin No. Signal 2 Vs 1 Vs 1 GND 1 5.3V 1 5.3V 3 GND 2 Vs 2 Vs_ON 2 GND 2 GND 4 GND 3 NC 3 GND 3 Va 3 Va 5 Vg 4 GND 4 PS_ON 5 GND 5 GND 6 GND 6 5.3V 7 Vg 7 GND 8 5.3V 9 5.3V 10 5.3V 6 CN801(SMPS) ↔ CN101(MAIN Board) Pin No. Signal Pin No. Signal Pin No. Signal 1 NC(AUTO_V) 9 GND_5.3V 17 GND_12V 2 PS_ON 10 GND_5.3V 18 GND_12V 3 GND_STBY 11 GND_5.3V 19 GND_12V 4 STBY 12 GND_5.3V 20 12V 5 GND_18V AMP 13 5.3V 21 12V 6 GND_18V AMP 14 5.3V 22 12V 7 18V AMP 15 5.3V 23 NC(FAN_DET) 8 18V AMP 16 5.3V 24 NC(FAN_ON) Samsung Electronics 7 CN1401(MAIN Board) ↔ FUNCTION Pin No. Signal 1 KEY_INPUT1 2 KEY_INPUT2 3 AGND 6-3 Wiring Diagram 8 CN2203_FHD(MAIN Board) ↔CN2010(Logic Board) Pin No. Signal Pin No. Signal Pin No. Signal Pin No. Signal 1 PANEL_VCC 12 LCD_ODD_TX1+ 23 LCD_EVEN_TX0- 34 LCD_EVEN_TX4+ 2 PANEL_VCC 13 LCD_ODD_TX2- 24 LCD_EVEN_TX0+ 35 LCD_EVEN_TX5- 3 PANEL_VCC 14 LCD_ODD_TX2+ 25 LCD_EVEN_TX1- 36 LCD_EVEN_TX5+ 4 PANEL_VCC 15 LCD_ODD_TXCLK- 26 LCD_EVEN_TX1+ 37 SCL_LOGIC 5 GND 16 LCD_ODD_TXCLK+ 27 LCD_EVEN_TX2- 38 SDA_LOGIC 6 GND 17 LCD_ODD_TX3- 28 LCD_EVEN_TX2+ 39 WP_PANEL 7 GND 18 LCD_ODD_TX3+ 29 LCD_EVEN_TXCLK- 40 LVDS_FORMAT 8 GND 19 LCD_ODD_TX4- 30 LCD_EVEN_TXCLK+ 41 DDC_CTRL_PANEL 9 LCD_ODD_TX0- 20 LCD_ODD_TX4+ 31 LCD_EVEN_TX3- 10 LCD_ODD_TX0+ 21 LCD_ODD_TX5- 32 LCD_EVEN_TX3+ 11 LCD_ODD_TX1- 22 LCD_ODD_TX5+ 33 LCD_EVEN_TX4- 9 CN1203(MAIN Board) ↔ SPEAKER 0 CN800(SMPS) ↔ AC INLET Pin No. Signal Pin No. Signal 1 R+_OUT 1 AC N 2 R-_OUT 2 NC 3 L+_OUT 3 AC L 4 L-_OUT 6-4 Samsung Electronics Wiring Diagram 6-1-2 Connector role Loc. No. CN5400 CN5401 CN5402 CN5500 CN5501 CN5502 CN5410 CN5510 CN5003 CN5005 CN5006 CN5012 CN2008 CN5002 CN810 CN5004 CN809 CN4000 CN801 CN1101 CN800 CN2000 CN4001 Description Scan Driver IC of Y-Main transmits scan signal to Y ports of module. Connect Y-Main Scan(High) with Y-Main Scan(Low) by signal. Connect Y-Drive with Y Main Scan. Supply drive signal to Y ports of panel in order. Supply Y-drive signal to Y-Drive from logic board, Supply Vg, Vs power to Y-Drive from SMPS. Supply Vg, Vs power to X-Drive from SMPS. Supply 5V, 18V, 12V power to Main board from SMPS and connect STBY, PS_ON signal. Connect AC-inlet to SMPS and supply 100~240V power to SMPS. Supply X-drive signal to X-Drive from logic board, CN4014 CN4015 CN4016 CN4017 CN807 CN2001 CN2010 CN2203_FHD CN2006 CN2502 CN2005 CN2600 CN2007 CN2700 CN2500 CN2602 CN2601 CN2701 CN811 CN2708 CN1401 X-Drive transmits scan signal to X ports of module. Supply 5.3V power to logic board from SMPS and connect VS_on, PS_On, STBY signals. Connect Main board with Logic board and transmit LVDS visual signal to Logic board. Transmit data signal and control signal of Logic board to E-Buffer. Transmit data signal and control signal of Logic board to F-Buffer. Transmit data signal and control signal of Logic board to G-Buffer. Connect E-Buffer with F-Buffer by signal. Connect F-Buffer with G-Buffer by signal. Supply 5.3V, Va power to F-Buffer from SMPS. Connect Key_Input1, Key_Input2, LED, IR signals of function assy to Main board and supply 5V power. Samsung Electronics 6-5 MEMO 6-6 Samsung Electronics Schematic Diagram 7. Schematic Diagram 7-1 Circuit Description Logic Board DRAM Input Data Processor Data Controller X Main Board Y Main Board Driver Timing Controller Display Data Display Timing Scan Timing Row Driver PDP Panel Y-Pulse Generator X-Pulse Generator Address Buffer SMPS Board LVDS Main SMPS Main Board LVDS Trans Image Enhancer Deinterlacer Audio Processor Image Scaler CPU Decoder Video Decoder Speaker Out TMDS Recever A/D Converter Video S/W Micom AC Power Source ■ SMPS Board The SMPS used for the PDP has been designed to be efficient, compact and lightweight. For VS and VA outputs, a LLC converter has been used. For the other outputs, a Flyback converter has been used. ■ LOGIC Board The logic circuit consists of a Logic Main Board and an Address Buffer Board. The Logic Main Board decodes the video signal encoded by the Video Board, outputs the ADDRESS data signal for each pattern and generates X and Y drive signals. The Address Buffer Board buffers and transfers the ADDRESS data output signal using TCP IC. - LVDS with built-in video signal processing (W/L, error diffusion, APC, FCR, etc.) applied and 1 ASIC chip. - Outputs the address Drive IC control and data signals to the Buffer Board. - Outputs the control signal for the X and Y Drive Boards. - Monitors major drive voltages (Micom Circuit Block); detects if a surge voltage has been applied and protects the Drive Circuit. - Temperature Adaptive Operating Mode (Low Temperature/Room Temperature/High Temperature); Discharge optimization for each temperature level. ■ X-MAIN Board Connects to the X terminal block, 1) provides maintaining voltage waveform (including ERC), and 2) maintains the Ve bias in the Scan section. ■ Y-MAIN Board Connects to the Y terminal block, 1) provides maintaining voltage waveform (including ERC), 2) provides Y Rising, Falling Ramp waveforms, and 3) maintains the Vscan bias. ■ Address Buffer Board It delivers the data signal and control signal to the TCP. Samsung Electronics 7-1 MEMO 7-2 Samsung Electronics Schematic Diagram 7-2 Schematic Diagram 7-2-1 POWER This Document can not be used without Samsung’s authorization. Power FAN_ON_OFF CN1105_FAN1 IC1108_FAN1 IN 10nF 100nF 2 OUT GND 3 1 47uF 50V LM317EMP 1 1/4W 3 C1117 R1132 VOUT ADJ 68ohm 2 R1123 C1118 FAN C1116 100nF 10nF 1 47uF 50V 270ohm 1 1 100uF 16V VOUT VI N 1/4W FAN FAN IC1103 68ohm 2 OUT 3 B6.4V R1131 IN GND PGND PGND C1179 47uF 16V C1102 10uF 1.2V Power suply D1104 RLZ8.2B R1124 1 1 1.1Kohm PX_VD1.2 PX_VA1.2 PX_VL1.2 A5V 1 L1102 22uH PGND C1130 10nF 100nF R1114 5.6Kohm SOUND_AMP PGND C1167 C1168 1 mF 10V SOUND_AMP 100nF IC1113 1/10W 5.1Kohm 10nF ACB2012L-015-T 1mF 10V 1.2Kohm R1125 C1164 BD1110 C1165 R1113 BD1111 CIB31P600NE C1142_DE C1129 1uF 270ohm MBRS340T3 D1103 C1132 CN1101 ACB2012L-015-T R1112 R1111 100Kohm SMW200-24C BD1109 1/10W MAIN_POWER_CONTROL BD1112 ACB2012L-015-T C1170 R1115 10V 1uF 1 1 1 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 SMW250-03 KIA78R08PI CTRL C1104_FAN2 1 C1101 CN1107_FAN2 IC1111_FAN2 4 KIA78R08PI FAN_DET 4 CTRL C1106 SMW250-03 3 2 1 B18VS 3 2 1 B5V C1137_FAN1 B13V CN1106_FAN2 SMW250-03 3 2 1 SMW250-03 FAN_DET CN1104_FAN1 3 2 1 FAN_ON_OFF 100nF 5.6Kohm C1175 82uF 6.3V B3.3VD L1104 22uH R1119 10Kohm C1155 10nF D1107 Stand by Power 1 2 3 4 BS SS IN EN FB GND C1144 100nF 8 7 6 5 MGND1 SW COMP C1111 100nF C1110 1mF 10V C1177 R1117 20Kohm R1126 15Kohm MAIN_POWER_CONTROL 1mF 10V C1178 100nF C1112 180pF C1134 3.3nF B2.5V_DTV IC1111 R1121 5.6Kohm IC1102 MP1583DN PMLL4148 D1106 MBRS340T3 BD1101 CIB31P600NE C1143 100nF R1118 15Kohm AP1117D-25A R1127_PDP L:POWER ON H:OFF 22ohm C1148 A5V ACB2012L-015-T 10uF 100nF 47uF C1154 100nF B3.3VD B2.5V_VDD 1 C1140 100uF OUT IN C1146 100nF C1145 10000nF 3 GND 1 C1141 82uF 2 C1147 100nF A3.3V A5V IC1112 BD1108 NCP1117DT33T5 3 VIN VOUT C1157 ACB2012L-015-T 2 100nF PGND B3.3VD C1159 100nF 100uF 16V BD1103 AP1117D-A 3 C1158 B1.25VD_FBE IC1115 ADJ 1 C1156 10uF PGND C1149 PGND B5V_VCCA BD1105 CIB31P600NE 2 IC1110 G950T45R C1151 A5V_1 VOUT ADJ C1162 100nF PGND BD1115 VIN VOUT C1172 82uF C1171 100nF ACB2012L-015-T 2 ADJ CIB31P600NE 1 C1150 C1153 SW_POWER 10nF 100uF 100nF 16V PGND C1152 VIN 1 3 BD1116 82uF C1108 1/10W 120ohm C1103 10000nF R1128 PGND PGND PGND Samsung Electronics 7-3 Schematic Diagram 7-2-2 SOUND PROCESS This Document can not be used without Samsung’s authorization. SOUND Power SOUND AMP TP01 D1218 PMLL4148 capacitor must be close to PIN82 IR_CNTR R1203 100ohm C1201 1uF SGTV_HDMI_RESET Close to IC C1202 220nF SDA1 SCL1 R1246 47ohm 47ohm R1205 R1206 R1249 1nF 4.7ohm C1206 C1208 18pF C1321 C1273 R1248 SGND 100nF 1nF 4.7Kohm 35V 4.7uF C1209 R1250 C1322 100nF C1279 100nF C1218 BD1202 C1214 100nF C1212 C1219 C1213 C1220 100nF 10000nF 1nF 4.7Kohm C1217 100nF 100nF 100nF C1210 BD1201 MMZ2012Y202B MMZ2012Y202B C1280 C1216 B3.3VD BD1203 C1278 470nF 100nF B6.4V 10000nF 2 100nF 3 C1277 1 4.7ohm C1276 L1201 1nF CMI-SPC8L80F-150M R1247 4 C1275 220uF 35V B3.3VD C1274 10Kohm 10Kohm X1201 B3.3VD - 18pF Chassis GND SGND BD1205 R1207 R1209 4.7ohm 1nF SGND C1205 24.576MHz C1272 B18VS Special Consideration for Tuner GND: A thick GND trace must come from the Tuner. 100nF MMZ2012Y202B C1211 10000nF C1215 1nF 10000nF C1221 100nF SGND PGND C1281 SGND C1282 R1264 R1265 100pF C1316 D1214 22nF PMLL4148 B1.8V_SIDE C1317 C1318 C1298 R1266 100nF 100nF SGND I2S_SCLK_AMP I2S_LRCLK_AMP C1302 470nF C1305 100nF C1323 100nF C1324 100nF C1294 CN1203 R1257 C1299 PGND 1nF SGND C1310 1nF C1311 R1259 4.7ohm 4.7ohm 0ohm 10V 10000nF 100nF SGND Close to IC C1243 C1244 1uF 1u F AV_SL_IN AV_SR_IN TP01 Chassis GND R1260 1nF 4.7nF SGND HDMI_SCLK HDMI_LRCLK 1nF 4.7Kohm 4.7nF HDMI_SDO R1256 4.7Kohm 4.7nF 100ohm 100ohm R1232 R1233 Speaker out C1297 100nF C1236 4.7nF 1nF PST038-01 BD1210 PC_DVI_SL PC_DVI_SR COMP_SL_IN COMP_SR_IN C1233 C1234 C1235 C1230 _ C1256 SGND C1253 IR_CNTR C1339 33pF 33pF R1253 4.7ohm 1nF 2 C1296 SGND 100ohm 1Kohm C1292 SGND C1312 1uF R1252 4.7ohm C1232 100nF 1u F 1 uF 1uF 1uF 820pF 4.7nF OUT2B OUT2B PGND2B R+_OUT + 820pF C1226 4.7nF TEST0 PGND2B DVDDPLL BST2B AVDDPLL 1nF 2 4 3 1 C1231 100nF C1262 PVDD2B C1291 L+_OUT R-_OUT 10000nF C1227 C1229 10000nF C1228 R1222 100ohm C1222 C1223 C1224 C1225 C1261 LFM BD1211 - SGND PMLL4148 - 3 BST1B VDR1B OUT1B PGND1B OUT1B PGND1B PVDD1B PVDD2B Close to IC I2S_DATA_AMP I2S_LRCLK_AMP I2S_SCLK_AMP SDA1 S C L1 PVDD1B OUT1A PVDD1A PVDD1A 56 55 54 53 52 51 50 49 48 47 46 45 44 43 OUT1A PGND1A PGND1A PVDD2A AGNDPLL 3.3Kohm C1309 PVDD2A DGNDPLL D1213 I2S_DATA_AMP I2S_CLK_AMP L-_OUT - Close to IC 1/10W 1nF OUT2A VDD_ - BD1204 220uF 35V 15 16 17 18 19 20 21 22 23 24 25 26 27 28 C1308 CLK_ VDR2B R1258 OUT2A MGND1 DVSS 10000nF PGND2A NTP-3000 CLK_ SOFT_RESET_2 C1304 100nF PGND2A IC1203 VSS_ PWM_MASK_2 100nF AD AUX_PWM3A C1300 BST2A AUX_PWM3B C1303 C1301 AVDD_PLL 10V 10000nF DVDD_PLL 100nF /RESET SCL C1295 SGND BD1209 C1287 42 41 40 39 38 37 36 35 34 33 32 31 30 29 NC BD1208 - 22nF VDR2A SDA I2S_CLK_AMP C1288 C1290 VDR1A BCK 100pF BST1A WCK C1293 1 2 3 4 5 6 7 8 9 10 11 12 13 14 SDATA 1uF 1uF 1uF DVDD SGTV_HDMI_RESET C1289 Close to IC C1286 100ohm 100ohm 100ohm 100ohm R1217 R1218 R1219 R1220 B18VS 1 PMLL4148 D1212 R1254 100ohm 4.7ohm 1nF PMLL4148 22nF R1251 L1202 22nF C1285 C1283 D1211 CMI-SPC8L80F-150M C1284 1 1 1 1 100nF 4 100nF SGND 100nF B1.8V_SIDE C1254 C1255 AV_SR_OUT AV_SL_OUT C1319 100nF C1271 10V 10000nF HDMI_PC_R_COMP_Pr(9) HDMI_PC_R_COMP_Pr(8) HDMI_PC_R_COMP_Pr(7) HDMI_PC_R_COMP_Pr(6) 2 4 RA1305_WX 6 22ohm 8 1 3 5 7 HDMI_PC_R_COMP_Pr(5) HDMI_PC_R_COMP_Pr(4) HDMI_PC_R_COMP_Pr(3) 2 4 RA1304_WX 6 22ohm 8 1 3 5 7 HDMI_PC_R_COMP_Pr(2) 2 4 RA1303_WX 6 22ohm 8 1 3 5 7 HDMI_PC_G_COMP_Y(8) HDMI_PC_G_COMP_Y(7) HDMI_PC_G_COMP_Y(6) HDMI_PC_G_COMP_Y(5) HDMI_PC_G_COMP_Y(4) HDMI_PC_G_COMP_Y(0) HDMI_PC_G_COMP_Y(3) IC1302_WX SII9125CTU HSYNC CGND MCLK VSYNC IOVCC33 EVNODD IOGND SCK CGND CVCC18 WS CVCC18 RSVDNC CSDA RSVDNC CSCL RSVDNC DSDA1 SD DSCL1 CVCC18 R1PWR5V CGND IOGND SPDIF IOVCC33 RSVDNC DSDA0 RSVDNC DSCL0 MUTEOUT AVCC18 AGND R1X2+ R1X2- AVCC33 AGND R1X1+ R1X1- AVCC33 AGND R1X0+ R1X0- AVCC33 AGND R1XC+ R1XC- AVCC33 RSVDNC AVCC18 AGND R0X2+ IOVCC33 R0X2- AGND AVCC33 R0PWR5V IOGND 4.7Kohm TP01 1 1 C1335_WX 10V 28.322MHz CVCC18 R1341_WX X1301_WX DVCC18 IOVCC33 DE R1351_WX Q34 Q33 Q32 IOGND IOVCC33 Q31 Q30 Q29 Q28 CGND Q27 Q26 CVCC18 Q25 Q24 IOGND Q23 Q22 Q21 Q20 Q19 CGND Q18 CVCC18 Q17 Q16 IOGND Q15 Q14 IOVCC33 IOVCC33 DGND MGND1 IOGND 10ohm R1330_WX IC1301_WX NCP1117DT18T5G BD1301_WX - 1 3 VIN VOUT ADJ C1327_WX 100uF 16V C1326_WX 2 1 C1325_WX 82uF 6.3V D2_RXCLD2_RXCL+ 7-4 Q13 Q12 Q11 CGND Q0 XREF D317 D316 D315 C439 D314 C438 C437 D313 C436 D312 XTALOUT B1.8V_9125 1 CDS3C30GTH CDS3C30GTH 100pF CDS3C30GTH CDS3C30GTH 100pF 100pF CDS3C30GTH 100pF CDS3C30GTH CDS3C30GTH 33pF C435 TP355 1 D311 CDS3C30GTH 75ohm R354 D310 75ohm R353 CDS3C30GTH 33pF C434 D309 75ohm R352 D308 CDS3C30GTH CDS3C30GTH 75ohm 75ohm R351 D307 C431 C433 D306 1 D305 R350 47pF 100pF CDS3C30GTH RD8.2MB 3 RD8.2MB 3 1 D304 2 RD8.2MB 3 1 D303 2 CDS3C30GTH D302 2 33pF 75ohm R349 C432 B3.3VD TP354 1 XREF 0ohm 0ohm Q1 AGND SGND R1342_WX XR RE 1F343_WX CVCC18 144 143 142 141 140 139 138 137 136 135 134 133 132 131 130 129 128 127 126 125 124 123 122 121 120 119 118 117 116 115 114 113 112 111 110 109 D1201 KDS184 R1269 D2_DDC_SDA D2_DDC_SCL XTALIN R0X1+ MGND2 4.7Kohm MONITOR_MUTE1 XTALVCC R1308_WX 4.7Kohm SGTV_HDMI_RESET 0ohm 10000nF C1315_WX 20pF R1313_WX 1Mohm C1336_WX 20pF R1318_WX 10ohm HDMI_SCLK HDMI_LRCLK R1319_WX 10ohm R1320_WX 10ohm HDMI_SDO R1333_UX R1334_UX 0ohm 0o hm R1335_UX R1336_UX 0ohm 0ohm R1337_UX R1338_UX 0ohm 0ohm R1339_UX R1340_UX 0ohm 0ohm HDMI_RXCLKHDMI_RXCLK+ HDMI_RX0HDMI_RX0+ HDMI_RX1HDMI_RX1+ HDMI_RX2HDMI_RX2+ XREF TP353 1 E REGVCC Q3 Q2 108 107 1 06 105 1 04 103 1 02 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 D2_RX2D2_RX2+ TP352 1 SGND C CVCC18 10ohm 10ohm 62ohm 0ohm 0ohm RSVDL RSVDNC CGND R1328_WX R1329_WX R330 TP351 1 R1212 10Kohm R1331_WX RE XR 1F332_WX XREF Q4 XREF 75ohm SDA1 SCL1 Q1203 KSC1623-Y B XREF RESET# XREF R342 TP350 1 100uF 16V 10Kohm MUTE_AMP XREF C1204 SCDT Q5 R0X1- 75ohm KSA1182 Q1201 IN T Q7 Q6 AVCC33 75ohm R340 R1204 C IOGND AGND R339 TP349 1 E B MGND1 AV_CVBS_OUT 75ohm TP348 1 D1204 PMLL4148 XREF IOVCC33 XREF COMP_Y R334 TP347 1 DE_WX HSOUT_ADC VSOUT_ADC R1314_WX 10ohm R1315_WX 10ohm R1317_WX 10ohm CI2CA IOVCC33 D2_RX1D2_RX1+ SVHS_Y 75ohm 2 IOGND ODCK 10ohm 10ohm SVHS_C COMP_Pr 75ohm R332 33ohm CGND R1326_WX R1327_WX COMP_Pb R331 22ohm R1345_WX 12 2 m R1346_WX /1o0hW 1/10W HDMI_PC_B_COMP_Pb(1) HDMI_PC_B_COMP_Pb(0) R1271 2 4 RA1307_WX 6 22ohm 8 CVCC18 R0X0+ AV_CVBS_IN 1 3 5 7 Q 35 Q9 Q8 XREF TP346 1 B3.3VD 1 GND XREF Q10 R0X0- IDENT_AV IDENT_COMP CLK_WX HDMI_PC_B_COMP_Pb(5) HDMI_PC_B_COMP_Pb(4) HDMI_PC_B_COMP_Pb(3) HDMI_PC_B_COMP_Pb(2) R1309_WX 33ohm 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 AVCC33 TP345 1 100ohm 1/10W 2 4 RA1306_WX 6 22ohm 8 AGND TP344 1 IDENT_SVHS R1273 1 3 5 7 R0XC+ TP343 1 HDMI_PC_B_COMP_Pb(9) HDMI_PC_B_COMP_Pb(8) HDMI_PC_B_COMP_Pb(7) HDMI_PC_B_COMP_Pb(6) A3.3V B3.3VD 10ohm 10ohm 470ohm B3.3VD XREF HDMI_PC_B_COMP_Pb(0:9) R1324_WX R1325_WX R348 TP342 1 1nF 100nF XREF 470ohm TP341 1 C1314_WX C1333_WX D2_RX0D2_RX0+ R347 TP340 1 100nF XREF 330ohm 1 2 /RESET,RESET VDD C1331_WX R0XC- TP02 COMP_SL_IN 330ohm R357 100nF AVCC33 AV_SL_OUT COMP_SR_IN R356 C1313_WX 100nF 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 AV_SR_OUT 100nF IC1204 RT9818C-42PV CN404 PCN10EA-32P-2.54DS AV_SL_IN C1329_WX B5V 1 17 2 18 3 19 4 20 5 21 6 22 7 23 8 24 9 25 10 26 11 27 12 28 13 29 14 30 15 31 16 32 TP339 1 C1332_WX IR_CNTR GND 3 TP338 1 /RESET,RESET VDD D1217 RLZ5.6B-TE-11 Reference : 300~ C1330_WX 100nF 10V 10000nF R1349 2.2Kohm IC1810 RT9818C-42PV R1353 4.7Kohm EXTENSION CONNECTOR 10V 10000nF C1307_WX 1 PMLL4148 470ohm D1210 3 D1221 C1338_WX BD1303_WX - D1208 330ohm 1/10W SENSE_POWER 470ohm B3.3VD 2 4 RA1302_WX 6 22ohm 8 PMLL4148 1 3 5 7 R1267 AVCC18 R1352 470ohm PMLL4148 D1220 RLZ5.6B-TE-11 SGND B3.3VD 2 4 RA1301_WX 6 22ohm 8 PMLL4148 1 3 5 7 330ohm 1/10W E Q1210 KSC1623-Y R345 B3.3VD D1209 R1268 KSC1623-Y 10ohm C PMLL4148 R1323_WX B 33ohm 1/10W A3.3V 1 22Kohm B13V E R1350 R1202 C 10V 10000nF 1 1 1 B Q1211 C1337_WX 1 22Kohm 560ohm R1201 MONITOR_MUTE1 1nF B B5V D1219 R1272 C1328_WX C1306_WX 100nF XREF XREF HDMI_PC_G_COMP_Y(2) BD1302_WX ACB1608H-060-T A5V AV_SR_OUT AV_SL_OUT HDMI_PC_G_COMP_Y(0:9) HDMI_PC_G_COMP_Y(1) POP NOISE SOLUTION HDMI_PC_R_COMP_Pr(0:9) B1.8V_9125 HDMI_PC_R_COMP_Pr(1) - HDMI_PC_R_COMP_Pr(0) DVDD_PLL BD1207 HDMI_PC_G_COMP_Y(9) - R346 TP02 HDMI RECEIVER BD1206 AV_SR_IN 100ohm 100ohm R1243 R1244 SGND AVDD_PLL SGND 10000nF 10000nF Samsung Electronics Schematic Diagram 7-2-3 Input & Output Jack This Document can not be used without Samsung’s authorization. DVI Connector 4 3 DGND_IN HDMI1_RX0HDMI1_RX0+ R1436 R1437 10ohm 10ohm HDMI1_RX1HDMI1_RX1+ R1438 R1440 10ohm 10ohm HDMI1_RX2HDMI1_RX2+ D1428 3 A3.3V 2 1 ACM2012D-900-2P-T ACM2012D-900-2P-T 1 3 4 TP1411 R 141 4 R1416 R1420 R1424 R1427 R 143 0 1 1 1 TP1413 3 4 DVI_5V TP1414 R1439 1Kohm 1 TP1415 1 HDMI2_RX2HDMI2_RX1HDMI2_RX0HDMI2_RX2+ HDMI2_RX1+ HDMI2_RX0+ MGND2 AT24C02N-10SC TP1408 1 1 DVI_DDC_SDA DVI_DDC_SCL DDC_WP 5 6 7 8 100ohm 100ohm R1417 R1421 1 TP1410 SDA 2 1 RLZ5.6B-TE-11 TP1421 TP1422 1 TP1420 D1433 DGND_IN 1 C1406 100nF 3 4 1 SCL E2 MODE,/WC E1 E0 VCC 1 4 MGND3 MGND2 MGND1 TP1412 2 3 1 R2266 R1441 4.7Kohm 10ohm R1444 10 o hm R1447 100ohm D1416 MMBD4148SE 2 JA1405 DVI_DDC_SCL TP1417 1 DVI_DDC_SDA IDENT_DVI HDMI2_RXCLK+ MGND3 MGND2 HDMI2_RXCLK- 1 2 3 D1419 MMBD4148SE 2 3 1 MGND1 BD1401 CIM10J121NC TP1437 PC_B_Loopout PC_H_Loopout PC_V_Loopout 1 TP1435 TP14139 1 0ohm R1450 PC2_V_SYNC CIM10J121NC C1407 R1452 10Kohm 100pF C1408 100pF RD8.2MB PC1_GREEN 3 R1459 R1458 75ohm R1457 75ohm 75ohm D1436 10Kohm 1 DDC_WP R1468 1 R1461 1 8 7 6 5 R1464 22ohm AGND_IN 47ohm R1469 1 R1471 47ohm 75ohm C1410 IC1403 AT24C02N-10SC 10Kohm VC C MODE,/WC E1 SCL E2 VS S 100nF 1 1 2 3 4 E0 SD A AGND_IN R1472 BD1403 PC_5V 75ohm R1476 D1443 D1444 D1445 D1446 22ohm C1422 100pF R1480 0ohm AGND_IN BD1404 C1423 PC1_V_SYNC 2 CIM10J121NC R1481 10Kohm 1 RLZ5.6B-TE-11 100pF IDENT_PC R1479 100pF AGND_IN C1415 10Kohm 100ohm D1442 MGND1 PC1_H_SYNC 0ohm CIM10J121NC R1473 R1478 3 3 1 TP03 TP04 DDC_VCC 10uF R1460 JA1406 RD8.2MB 1 75ohm 2 1 D1435 3 D1434 2 1 2 6 1 11 7 2 12 8 3 13 9 4 14 10 5 15 1 MGND2 109-210101D011231-LF D1451 RD8.2MB2 3 1 2 MMBD4148SE D1452 C1424 100pF B5V_VCCA AGND_IN R1482 0ohm PC_SDA R1483 0ohm AGND_IN SDA_D SCL_D 1 1 MMBD4148SE MMBD4148SE MGND4 MGND3 D1450 R1455 PC1_RED C1409 3 3 D1449 1 3 DDC_VCC 21 26 16 22 27 17 23 28 18 24 29 19 25 30 20 MMBD4148SE 3 1 D1448 1 TP1430 PC_G_Loopout D1441 1 1 1 PC_R_Loopout 75ohm 1 CDS3C30GTH CDS3C30GTH 330pF 50V TP1444 TP1443 D1440 C1421 C1414 330pF 50V TP1445 TP1446 12pF C1420 C1418 100ohm 100ohm 100ohm C1419 3 3 50V 10nF R1474 R1475 R1477 12pF KSC1623-G 50V 10nF 100ohm 12pF Q1403 E C1417 R1470 12pF C C1416 PC_DVI_SR C1413 1 1 TP1434 1 TP1438 1 TP1440 TP1442 1 1 1 2 3 4 5 6 7 8 TP1428 D1447 2 1 2 1 2 1 3 LED_CNTR 35312-0819 CN1401 TP1431 TP1432 KEY_INPUT1 KEY_INPUT2 B C1412 100nF 1 R1462 470ohm 1 75ohm R1454 DDC_VCC PC_DVI_SL TP1426 2 3 1 PC D-SUB OUTPUT R1456 470ohm 1 5 4 C1411 10nF R1467 R1465 R1466 IR TP1423 TC38-066 D1439 SDS7000 R1453 PC1_BLUE 1 JA1407 4.7Kohm 2.7Kohm 2.7Kohm R1463 1Kohm R1451 10Kohm 3 3 2 1 PV(BNC) SOUND A3.3V D1438 SDS7000 PC2_H_SYNC PC D-SUB INPUT FUNCTION D1437 SDS7000 R1449 ZD1402 ZD1401 RD8.2MB A5V_1 0ohm 1 AGND_IN DGND_IN PC2_BLUE 75ohm R1443 R 1 448 0ohm 2 AGND_IN TUNERGND PC2_GREEN 75ohm R1431 BD1402 AGND_IN 75ohm 3 1 HDCP_CTRL Q1402 C B KSC1623-G E R1442 UCT-EX-036 D1432 ACM2012D-900-2P-T 75ohm JA1403 TP1406 4 1 3 2 1 VSS DDC_VCC FT1408 D1429 IC1402 TP1405 10 o hm 10ohm 10ohm 10ohm 10ohm 10ohm UCT-EX-050 1 1 R1428 PC2_RED C1404 10uF DIGITAL EDID EPROM 16V C1405 100nF R1408 10Kohm TP1416 1 TP1418 TP1419 1 3 3 D1411 MMBD4148SE D1410 MMBD4148SE 3 D1409 MMBD4148SE 3 D1408 MMBD4148SE 3 D1407 MMBD4148SE 3 TP1404 TP1409 1 FT1403 2 1 1 75ohm 75ohm R1403 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 FT1402 3 3 TP1407 R1402 3 1 1 10ohm 10ohm 2 1 D1427 3 2 1 D1426 3 2 1 D1425 3 2 1 D1424 3 2 1 2 1 D1423 3 3 D1422 2 1 D1421 JA1404_NSI SP06-14555-02 2 4 3 D1420 ACM2012D-900-2P-T 1 1 2 3 FT1407 R1434 R1435 TP1403 3 4 D1401 MMBD4148SE 2 75ohm ACM2012D-900-2P-T 4 3 HDMI1_RXCLKHDMI1_RXCLK+ ACM2012D-900-2P-T 2 4 3 R1432 R1433 2 1 1 HDMI1_DDC_SDA HDMI1_DDC_SCL HDMI1_HOT_PLUG HDMI_CEC 10ohm 10ohm FT1401 1 9 17 2 10 18 3 11 19 4 12 20 5 13 21 6 14 22 7 15 23 8 16 24 IDENT_HDMI1 1 MGND1 3 1 2 MGND1 DGND_IN 2 22ohm R1419 22ohm R1423 FT1405 FT1406 2 47ohm D1418 MMBD4148SE 0ohm 1/10W 4.7Kohm R1418 0ohm 1/10W R1422 R1426 100ohm R1407 10Kohm JA1402 3 ACM2012D-900-2P-T VSS D1417 MMBD4148SE ACM2012D-900-2P-T 1 2 SD A 1 1 3 3 10Kohm FT1404 1 2 1 2 3 4 E0 E1 MODE,/WC SCL E2 D1406 MMBD4148SE R1410 VCC R1413 1/10W 0ohm 47ohm D1405 MMBD4148SE DGND_IN R1411 10ohm AT24C02N-10SC 8 7 6 5 1 D1414 2 1 2 D1415 RLZ6.2B D1413 TP03 IC1401 10Kohm D1430 100nF TP1401 2 3 MGND2 TP1402 1 10uF 16V R1405 R1409 Q1401 R1415 R1429 C1403 1 4 MGND3 DDC_VCC 1 D1403 C1402 MMBD4148SE D1402 RLZ5.6B-TE-11 UCT-EX-036 DDC_WP 2N7002L R1412 PGB1010603 MGND5 MGND3 1Kohm DGND_IN 18 19 17 16 15 14 12 13 11 10 9 8 6 7 5 4 3 2 1 MGND1 MGND4 MGND2 RD8.2MB D1412 3 0ohm 1/10W JA1401 TP03 75ohm 10Kohm 1N4148WS-F R1406 HDMI1_5V R1404 0ohm 1/10W 1 R1401 C1401 1uF 10V A5V R1446 DDC_VCC HPD_GLITCH_OFF BNC Connector B3.3VD R1445 HDMI INPUT D1404 MMBD4148SE Power PC_SCL B1.8V_SIDE C1438 10000nF 10V C1439 C1440 C1441 100nF 25V 100nF 25V C1448 7 6 5 VOUT -5V SIL_AVCC1.8 75ohm R1489 0ohm 1 3 R1X2AGND HPD0 R1X1+ AVCC18 R1X1AVCC33 R1X0+ 0ohm 0ohm C1446 10uF 16V 4 10000nF 10V 1 R1495 300ohm 1/10W TP1454 54 53 52 R1503 0ohm 51 50 49 48 PC_G_Loopout HDMI1_DDC_SCL HDMI1_DDC_SDA 46 45 43 42 R1510 0ohm R1506 0ohm 1 3 VOUT +VS -V S +I N -IN 5 R1484_DE PHY CTRL D0 D4 EDID E0 E0 CEC C0 C4 - 5V R1517 : I2C MODE R1513_DE : STAND ALONE MODE HDMI1_HOT_PLUG PC_B_Loopout R1509 75ohm 1 R1512 0ohm 3 VOUT +VS -VS +IN -IN DDC_VCC D1459 SEL_DVI DVI_DDC_SDA DVI_DDC_SCL R1518 R1521 0ohm 0ohm 1 2 3 4 /OE1 V CC 1A /OE2 2A 1B GND 2B IC1412 8 7 6 5 NC7WBD3125K8X R1519 R1522 R1525 10Kohm 0ohm 0ohm D2_DDC_SDA D2_DDC_SCL TP144T8P1449 D1453 BZX84C5V6LT1 1 1 6 2 7 3 8 4 9 5 IC1407 SP3232 1 C1453 R1493 R1494 2 3 100nF 4 5 6 7 47ohm 8 47ohm R1497 R1498 47ohm 47ohm TP145T2P1453 1 1 100nF 1 C1454 C 1+ VCC V+ GND C!- T1OUT C2+ R1 I N C 2- R1OUT VT2OUT R2IN T1IN T2IN R2OUT 16 15 14 13 12 11 10 9 R1491 0ohm R1492 100ohm SERVICE_ANY_TX R1496 200ohm SERVICE_ANY_RX R1500 C1455 100nF 1Kohm 1/10W 300ohm 1/10W A5V B3.3VD 5 C1458 10uF 16V 4 C1459 100nF R1516 300ohm 1/10W C1445 100nF R1508 R1507 300ohm 1/10W IACD810049J1RT0 2 PC1_BLUE RLZ6.2B C1456 10uF 16V 4 C1457 100nF R1485 HDMI1_RX0+ HDMI1_RX0- 41 75ohm I2C ADDR SEL HDMI1_RX1+ HDMI1_RX1- 44 R1504 2 PC1_GREEN HDMI1_RX2+ HDMI1_RX2- 47 IACD810049J0R9 T HDMI_CEC MICOM_CEC IDENT_HDMI1 1 A5V 0ohm CDS3C30GTH R1499 R1501_DE 0ohm R1502_DE 0ohm 55 TP1451 10 15 1 11 16 12 17 13 18 14 CDS3C30GTH 56 4.7Kohm R1517 B3.3VD TP1450 58 AGND R1C+ R1490 300ohm 1/10W 109-2010102231-F 1 C1452 100nF 60 40 R1C- 39 HPD1 AVCC18 38 37 36 DGND 35 RPWR0 DSCL0 DVDD 34 33 R1X0- SIL_DVDD1.8 R1524 R1526 -IN 57 HDMI1_RXCLK+ HDMI1_RXCLK- IDENT_DVI B3.3VD +IN JA1408 TP1447 59 SIL_AVCC1.8 R1511 R1514_DE R1515_DE +VS -VS C1451 - 5V 0ohm 32 DSDA0 31 AVCC18 30 R0X0- 22 21 EXTPSEL/INT R0CR0C+ 0ohm 0ohm VOUT 5 D1456 LSDA/EPSEL[0] LSCL/EPSEL[1] 4.7Kohm R1513_DE 10000nF 10V 100nF 2 5V C1444 100nF AD8009JRT 2 R2X0R1X2+ AGND 100nF 25V C1450 C1449 A5V IC1406 R1486 A3.3V RS232C C1443 61 R2X0+ 62 AVCC33 63 65 64 R2X1- AGND R2X1+ 66 R2X2- 67 69 68 R2X2+ DSDA2 AVDD18 70 DSCL2 71 73 74 72 RPWR2 RSVD DVDD DGND 78 75 76 77 TSCL TSDA RESET# R0X2+ 19 20 DSDA1 AVDD18 R0X2- 18 HDMI2_RXCLKHDMI2_RXCLK+ HDMI2_RX0HDMI2_RX0+ HDMI2_RX1HDMI2_RX1+ HDMI2_RX2HDMI2_RX2+ DVI_DDC_SDA DVI_DDC_SCL DSCL1 EXTSWING AGND 17 TXC- 29 15 16 CEC_D RPWR1 IC1408 SII9185CTU TXC + 28 14 CEC_A TX0AGND 27 12 13 TX0+ R0X1+ 11 499ohm HPD2 AVCC33 R0X1- 8 9 10 AVCC18 AVCC18 AVCC33 D2_RX0+ D2_RX0D2_RXCL+ D2_RXCL- TX1+ T X1 - 26 7 RXC2- 25 6 AGND RXC2+ 24 5 TX2AGND 23 D2_RX1+ D2_RX1- TX2+ HPDIN 79 AGND 3 4 R0X0+ 1 2 TPWR/I2CADDR 80 R1487 R1488 100nF 25V D2_RX2+ D2_RX2- Samsung Electronics CAP- C1430 10uF 16V 8 V+ OSC VREF PC1_RED D2_DDC_SDA D2_DDC_SCL SGTV_HDMI_RESET SDA1 SCL1 HDCP_CTRL GND PC_R_Loopout C1447 R1505 100nF 25V D1454 R1485 4. 7K ohm CAP+ 100uF 16V C1442 RLZ6.2B 100nF 25V FB/SHDN 3 10000nF 10V 2 3 4 2 C1437 1 C1431 100uF 16V 1 100nF 25V 10000nF 10V 100nF 25V CDS3C30GTH C1436 C1428 C1427 100nF 2 5V BD1407 MPZ2012S300A CDS3C30GTH 100nF 25V 100uF 16 V D1458 R1484_DE 4.7Kohm C1435 C1426 C1425 LT1054LCS8 D1457 100nF 25V C1432 16V 100nF TP04 IC1405 MGND1 10000nF 10V C1434 2 MGND2 C1429 100nF 25V VOUT ADJ HH-1M1608-600JT C1433 VIN A5V SIL_DVDD1.8 BD1406 MPZ2012S300A MGND3 BD1405 1 HDMI_HOT_PLUG 3 B3.3VD 4.7Kohm 4.7Kohm IC1404 NCP1117DT18T5G B3.3VD SIL_AVCC1.8 B3.3VD D1455 HDMI Switch B3.3VD MGND4 SIL_DVDD1.8 R1523 300ohm 1/10W IC1411 TC74LCX14FN(ELF,M) PC1_H_SYNC PC1_V_SYNC R1520 47ohm R1527 47ohm PC_V_Loopout PC_H_Loopout 7-5 Schematic Diagram 7-2-4 MICOM This Document can not be used without Samsung’s authorization. A5V_1 Q1804 2N7002L KEY_INPUT1 1 Q1803 A3.3V 1 1 1 1 RA1809 3 100ohm 5 MAIN_SDA_EEPROM MAIN_SCL_EEPROM KSC1623-Y MAIN_KEY_INPUT1 R2238 1Kohm 10Kohm B 7 2 4 6 8 TP_SDA TP_SCL TP_1805 TP_GND VSS P3_0,A8(/D8) P8_5,/NMI P8_4,/INT2 VCC2 P8_3,/INT1,CAN0IN P3_1,A9(/D9) P8_2,/INT0,CAN0OUT P3_2,A10(/D10) P8_1,TA4IN,/U,INPC1_5,OUTC1_5 P3_3,A11(/D11) P8_0,TA4OUT,U,ISRXD0 P3_4,A12(/D12) P7_7,TA3IN,CAN0IN,INPC1_4,OUTC1_4,ISCLK0 P3_5,A13(/D13) P7_6,TA3OUT,CAN0OUT,INPC1_3,OUTC1_3,ISTXD0 P3_6,A14(/D14) P7_5,TA2IN,/W,INPC1_2,OUTC1_2,ISRXD1,BE1IN P3_7,A15(/D15) P7_4,TA2OUT,W,INPC1_1,OUTC1_1,ISCLK1 P4_0,A16 P7_3,TA1IN,/V,/CTS2,/RTS2,INPC1_0,/SS2,OUTC1_0,ISTXD1,BE1OUT P4_1,A17 4.7Kohm 4.7Kohm 100nF R1831 47ohm 0ohm 0ohm 0ohm 0ohm R1832 R1833 R1834 R1836 1 7 1 RA1806 3 10ohm 5 7 R1850 1 MCA(10) IC1804_WX LP62S1024BV-55LLT MCA(11) MCA(9) MCA(8) MCA(13) R1840_WX 0ohm DOWNLOAD_CE CE MCA(15) R1842_WX 0ohm MCA(16) MCA(14) MCA(12) MCA(7) MCA(6) MCA(5) MCA(4) MCA(8) 2 4 6 8 2 4 6 8 7 1 RA1808 3 10ohm 5 7 MCA(0:21) MCA(0:21) SCL1 MCA(0) MCA(1) MCA(2) MCA(3) MCA(4) MCA(5) MCA(6) MCA(7) 10ohm RA1807 3 10ohm 5 R1854 R1855_1M2M R1856_1M2M R1857_2M TILT SDA0 SCL0 SDA1 2 4 6 8 2 4 6 8 RA1805 3 10ohm 5 MPZ2012S300A C1811_WX 10000nF R1830 R1823 DGND BD1802_WX C1812_WX 100nF C1808 C1809 10000nF 10V R1825 R1826 P1_2,D10 P1_1,D9 P1_0,D8 P0_7,AN0_7,D7 P0_6,AN0_6,D6 P0_5,AN0_5,D5 P0_4,AN0_4,D4 P0_3,AN0_3,D3 P0_2,AN0_2,D2 P0_1,AN0_1,D1 P10_6,AN6,/KI2 P10_5,AN5,/KI1 P10_7,AN7,/KI3 4.7Kohm 4.7Kohm 1 3 5 7 1 3 5 7 1 3 5 7 R1814 R1815 R1816 P10_3,AN3 P10_2,AN2 P10_4,AN4,/KI0 P0_0,AN0_0,D0 P2_7,AN2_7,A7(/D7) 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 B3.3VD RAM MCA(9) MCA(10) MCA(11) MCA(12) MCA(13) MCA(14) MCA(15) MCA(16) MCA(17) MCA(18) MCA(19) 10ohm 10ohm 10ohm 10ohm 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 A1 1 /O E A9 A10 A8 /CS1 A13 I/O8 /WE I/O7 C S2 I/O6 A 15 I/O5 VCC I/O4 NC VSS A16 I/O3 A14 I/O2 A12 I/O1 A7 A0 A6 A1 A5 A2 A4 A3 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 R1837_WX 0ohm OE MCAD(7) MCAD(6) MCAD(5) MCAD(4) MCAD(3) R1839_WX 0ohm CS1 MCAD(2) MCAD(1) MCAD(0) MCAD(0:7) MCA(3) MCA(2) MCA(1) MCA(0) MCA(20) MCA(21) 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 KEY_INPUT2 MAIN_KEY_INPUT2 SGTV_HDMI_RESET WP_I2C_READY R1860 R1861 100ohm 100ohm R1862 R1863 R1864 R1868 R1869 R1865 R1866 R1867 A3.3V R1871 4.7Kohm Q1805 2N7002L SCL_EEPROM P2_6,AN2_6,A6(/D6) VCC1 DGND Q1814 2N7002L 0ohm P2_5,AN2_5,A5(/D5) IC1803 M308A0SGP VSS XIN R2239 470Kohm IR_CNTR P10_1,AN1 XOUT A3.3V P4_2,A18 E P2_3,AN2_3,A3(/D3) P4_3,A19 C P2_2,AN2_2,A2(/D2) P4_4,/CS3,A20 R1853 R1859 470Kohm P2_1,AN2_1,A1(/D1) P2_4,AN2_4,A4(/D4) 100ohm 100ohm 100ohm R1858 1Kohm 100ohm P2_0/AN2_0,A0(/DO) /RESET P4_5,/CS2,A21 R1852 P8_6,XCOUT P4_6,/CS1,A22 C1816 22pF INT# IR_CNTR 10ohm P8_7,XCIN P4_7,/CS0,/A23 R1849 0ohm MAIN_MICOM CNVSS P5_0,/WRL,/WR R1847 P1_7,D15,/INT5 P5_1,/WRH,/BHE RESETN P9_0,TB0IN,CLK3 P5_2,/RD 10.0MHz P1_6,D14,/INT4 P5_3,CLKOUT,BCLK,ALE 100ohm HC-49/SM5H(10MHz,30ppm) P9_1,TB1IN,RXD3,SCL3,STXD3 P5_4,/HLDA,ALE EEPROM_WP SCL_EEPROM C1815 SDA_EEPROM 22pF 0ohm 0ohm P1_4,D12 P5_5,/HOLD EEPROM_WP R1841 R1843 P1_3,D11 P1_5,D13,/INT3 BYTE B3.3VD L1802 10uH 1nF 1 nF DGND P9_3,DA0,TB3IN,/CTS3,/RTS3,/SS3 P5_6,ALE X1801 100ohm P9_4,DA1,TB4IN,/CTS4,/RTS4,/SS4 P5_7,/RDY R1846 3.3Kohm 1Kohm R1838 C1805 C1806 P9_2,TB2IN,TXD3,SDA3,SRXD3 P6_1,CLK0 1 1 1 1 R1851 MICOM_RESET R1835 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 P6_3,TXD0,SDA0,SRXD0 100nF R1844 4.7Kohm 1 A3.3V DOWNLOAD_CNVSS 2 4 6 8 P6_0,/CTS0,/RTS0,/SS0 B3.3VD MS_MICOM_TX MS_MICOM_RX R1845 3.3Kohm R1848 100ohm C1813 1nF 1 RA1804 3 100ohm 5 7 P6_2,RXD0,SCLK0,STXD0 TP01 A3.3V IC1805 C1810 R1821 Q1802 2N7002L IR VREF IR_CNTR SOCKET : 3704-001184 C1814 R1827 1Kohm R1818 R1819 SOCKER SMT instead of FLASH !!! R1817 R1820 C1807 100nF AVSS 3 P6_4,/CTS1,/RTS1,/SS1 D1803 RD8.2MB AVCC CE OE IR_CNTR B3.3VD MCA(1) SVPD(0:7) R1870 MCAD(0) MCAD(1) MCAD(2) MCAD(3) MCAD(4) MCAD(5) MCAD(6) MCAD(7) FAN_DET L1801 10uH 4.7Kohm A0 BUSY R1829 CE# 0ohm 3.3Kohm GND A1 DGND R1813 FAN_ON_OFF R1828 A3 A2 MCAD(0) Q1801 KSC1623-Y 3.3Kohm Q0 OE# E R1824 Q8 A5 C1803 100nF B C RA1803 10ohm Q1 A6 A4 MCAD(1) R1810 4.7Kohm R1812 4.7Kohm P10_0,AN0 GND A7 B3.3VD C1804 10000nF P6_5,CLK1 B8 Q9 MCAD(2) P6_6,RXD1,SCL1,STXD1 A8 A17 MCAD(3) P6_7,TXD1,SDA1,SRXD1 B7 Q2 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 A7 Q1 0 A1 8 P9_6 A6 B6 Q3 RY/BY# MAIN_KEY_INPUT1 MAIN_KEY_INPUT2 P9_5,ANEX0,CLK4 A5 B4 B5 SW_PVCC PORT : Panel On/off(LCD) LVDS enable(PDP) NC 3 DDC_WP BD1801 2.2uH P9_7,/ADTRG,RXD4,SCL4,STXD4 A4 Q1 1 4 R1804 10Kohm MCAD(0:7) P7_0 A3 B3 VCC NC B3.3VD P7_1 A2 B2 Q4 RESET# MCAD(5) MCAD(4) P7_2,TA1OUT,V,CLK2 B1 Q12 WE# 4.7Kohm A1 R1811_2M 10Kohm Q5 NC R1822 /OE 1 2MCAD(0) 3MCAD(1) 4MCAD(2) 5MCAD(3) 6MCAD(4) 7MCAD(5) 8MCAD(6) 9MCAD(7) 10 Q13 A19 TILT D1802 KDS184 MCAD(6) 10000nF 4.7Kohm DIR Q6 A8 MCAD(0:7) MCAD(7) 100ohm R1801 D1801 KDS184 10Kohm 10Kohm SVPD(0) SVPD(1) SVPD(2) SVPD(3) SVPD(4) SVPD(5) SVPD(6) SVPD(7) V CC Q7 Q14 A9 VDD SMBDATA GND SMBCLK 2 22Kohm 3.3Kohm 20 19 18 17 16 15 14 13 12 11 Q15/A-1 A11 A10 1 RA1802 10ohm 10Kohm IC1802 GND A12 11 12 13 14 15 MCA(19) 16 MCA(18) 17 MCA(8) 18 MCA(7) 19 MCA(6) 20 MCA(5) 21 MCA(4) 22 MCA(3) 23 MCA(2) 24 TC74LCX245FT-ELK,M R1809 0ohm BYTE# A13 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 RA1801 DOWNLOAD_CE RESETN BUSY R1807 0ohm OE CSN 0ohm 0ohm 0ohm A16 A14 100ohm R1805 R1806 R1808 A15 TP01 S1801 SPSF100100 2 4 6 8 2 4 6 8 2 4 6 8 R1802 C1802 100nF R1803_2M C1801 10000nF 10V 4.7Kohm MX29LV160CTTI-70G MCA(16) 1 MCA(15) 2 MCA(14) 3 MCA(13) 4 MCA(12) 5 MCA(11) 6 MCA(10) 7 8 MCA(9) MCA(20) 9 MCA(21) 10 100ohm 100ohm 100ohm IC1801 HDMI1_5V DVI_5V MCA(0) MCA(0:21) B3.3VD DDC_VCC PC_5V MCA(0:21) MCA(17) Power UART_SEL1 UART_SEL2 DOWNLOAD_EPM DOWNLOAD_CE MAIN_SCL_EEPROM A3.3V R1872 R1873 R1874 R1875 DEFAULT_NET_TYPE 1 10ohm 10ohm 10ohm 10ohm 47ohm CSN CS1 CE OE ALE FBE_RESET 10ohm 10ohm 10ohm 10ohm RXDO_MAIN TXDO_MAIN B3.3VD R1878 4.7Kohm R1876 IR_CNTR R1877 4.7Kohm 0ohm R1879 4.7Kohm Q1806 2N7002L SDA_EEPROM A5V_1 MAIN_SDA_EEPROM 470ohm A5V_1 PC1_V_SYNC R1891_UX A3.3V VCC 1 2 3 4 5 6 7 /OE1 /OE4 D1 D4 O1 O4 /OE2 /OE3 D2 D3 O2 O3 GND 14 13 12 11 10 9 8 PC2_H_SYNC R1890_UX 1Kohm PC1_H_SYNC 0.3mm R1883_UX 1Kohm MM74HCT125M A3.3V D1806 VCC /OE1 /OE4 1A 4A 1B 4B /OE2 /OE3 2A 3A 2B 3B GND C2234 1uF A5V_1 R2249 470ohm A3.3V R2243 DGND IC2202 FST3125MX IC2204 14 13 12 1Kohm 11 10 9 1Kohm 8 R1882_UX R2248 C2232 100nF C2240 100nF PC2_V_SYNC B3.3VD R2263 4.7Kohm 10Kohm R2244 10Kohm 1 2 3 4 5 6 7 R2250 R2251 R2252 R2253 0ohm 0ohm 0ohm 0ohm R2262 4.7Kohm SERVICE_ANY_TX TXDO_SUB SERVICE_ANY_RX Q1817 2N7002L C2236 1SS184(T5L,F,T) RXDO_SUB Q1816 2N7002L C2237 5 0V 100pF 50V 100pF DGND DGND 1SS184(T5L,F,T) D1807 B3.3VD A3.3V R1914 R1913 R1916 R1911 R1912 R1904 R1905 R1906 R1907 R1908 R1909 4.7Kohm 4.7Kohm 4.7Kohm 4.7Kohm 10Kohm 10Kohm 10Kohm 4.7Kohm 4.7Kohm 100ohm UART_SEL1 SW_PVCC LOGIC_TX_P IDENT_DVI IDENT_HDMI1 LOGIC_RX_P XREF R2254 0ohm XREF R2255 0ohm VCC /OE1 /OE4 1A 4A 1B 4B /OE2 /OE3 2A 2B 3A 3B GND HIN1 PD6/PWM3/HIM2 NC VIN1 PE3 PD7/PWM2/VIN2 PE2 NRES VDD3V PE0/PWM0 PD0/VOUT PA7/CLAMP/AD7 PB3/FDO/NIRQ4 PA6/1/2VO/AD6 PB2/FDI/NIRQ3 PA5/1/2HO/AD5 PB1/NIRQ2 PA4/AD4 PA3/RXDA PA2/TXDA PB0/NIRQ1 R2265 4.7Kohm DGND 1 2 3 4 5 6 7 R2256 R2257 R2258 R2259 0ohm 0ohm 0ohm 0ohm R2260 R2261 0ohm 0ohm R2264 4.7Kohm SERVICE_ANY_TX TXDO_MAIN SERVICE_ANY_RX Q1819 2N7002L C2238 TXDO_MAIN RXDO_MAIN C2239 50V 100pF 44 43 42 41 40 39 38 37 36 35 34 PD1/HOUT PB4/PAT/CLKO/NIRQ5 R2246 10Kohm 50V 100pF RXDO_MAIN Q1818 2N7002L 33 32 31 30 29 28 27 26 25 24 23 DGND Q1815 KSC1623-Y C R1930 R1931 1 0ohm 2 0ohm 4 RA1811 6 100ohm 8 2 4 RA1812 6 100ohm 8 3 5 7 1 3 5 7 B E PC_H_SYNC PC_V_SYNC MUTE_AMP MICOM_RESET SCL_EEPROM SDA_EEPROM XREF UART_SEL1 R2242 10Kohm DGND RXDO_SUB TXDO_SUB SCL_D SDA_D 12 13 14 15 16 17 18 19 20 21 22 C1824 1nF PD2/PWM7/P13 PA1/DSCL D1805 IR_CNTR 1Kohm 0ohm 100ohm PD3/PWM6/P12 PB5/MSCL PA0/DSDA R1933 R1934 R1935 PD5/PWM4/P10 IC1807 WT61P6S-RN440 OSCI PB6/MSDA PC0/AD0 PGB1010603 IDENT_SVHS Q1813 SVP_ADC_RESET 2N7002L IR HDMI_HPD_SINK IDENT_PC 33ohm 33ohm 14 13 12 11 10 9 8 R2247 10Kohm DGND PD4/PWM5/P11 PC1/AD1 27Kohm 47ohm 2 4 RA1810 6 100ohm 8 OSCO PC2/AD2 1 3 5 7 VDD5V GND PC3/AD3 R1929 SW_POWER SEL_DVI R1932 1 2 3 4 5 6 7 8 9 10 11 PE1/PWM1/PWML 24.0MHz 3 12pF B3.3VD R2245 R1925 100ohm PC4/P14/RXDB X1802 C1823 C2235 1uF 10Kohm IC2203 FST3125MX 33ohm R1924 PC5/P15/TXDB 47ohm R1910 10Kohm D1804 MMBD4148SE MICOM_CEC R2267 10Kohm R1915 0ohm R1923 10Kohm PC6/P16/NIRQ6 R1928 1 2 12pF C1821 100nF C2233 100nF HPD_GLITCH_OFF R1918 R1920 R1922 B3.3VD PC7/SOGIN/P17 C1822 R1919 4.7Kohm R1926 10Kohm TP01 A3.3V C1820 10000nF 10V C1819 100nF 10Kohm 10Kohm A3.3V B5V_VCCA R1917 10ohm RESET_SUB LED_CNTR B5V_VCCA A5V_1 UART_SEL1 A3.3V 3 C1825 1uF /RESET,RESET VDD 1 RESET_SUB 2 4 6 8 2 4 6 8 RA1813 100ohm RA1814 100ohm KEY_INPUT1 KEY_INPUT2 EEPROM_WP IDENT_AV MS_MICOM_TX MS_MICOM_RX H L SELECT A TV PDP LVDS ON IDENT_COMP GND R1938 2.2Kohm 2 1 C1826 100nF 7-6 R1937 10Kohm IC1808 RT9818C-29PV 1 R1936 680ohm 1 3 5 7 1 3 5 7 C1827 10n F SUB_MICOM Samsung Electronics Schematic Diagram 7-2-5 SVP-WX(Scaler) This Document can not be used without Samsung’s authorization. LV_E(0:11) LV_E(0) LV_E(1) LV_E(2) LV_E(3) LV_E(4) LV_E(5) LV_E(6) LV_E(7) LV_E(8) LV_E(9) LV_E(10) LV_E(11) PC1_BLUE PC1_GREEN PC1_RED UX_VREFP_2 UX_VREFN_2 UX_VREFP_1 UX_VREFN_1 HDMI_SCLK HDMI_SDO HDMI_LRCLK TP_R2060 33ohm 1 33ohm 0ohm 0ohm V12 R2019_UX U12 R2020_UX U11 R2014_UX TP04 B3.3VD D2_DDC_SDA D2_DDC_SCL PX_DGND PX_REGVCC 10Kohm TP_R2018 33ohm 1 Y11 R2017_UX C2079_UX 100nF C2077_UX 100nF C2078_UX 100nF C2074 100nF R2013 DP_B[14] TB1P DP_B[13] TA1M DP_B[12] TA1P DP_B[11] TESTMODE DP_B[10] PWM0 HDMI_RX2+ HDMI_RX2HDMI_RX1+ HDMI_RX1HDMI_RX0+ HDMI_RX0TMDS_GND N2 M1 M2 R1 P3 N3 M3 L3 L1 HDMI_RXCLK+ HDMI_RXCLKPX_AVCC L2 P4 N5 N4 M4 M5 L4 TP_ANTSTO PX_PVCC R2029_FBE R2031_FBE R2057_FBE R2058_FBE R2028_FBE R2022_FBE R2023_FBE R2024_FBE R2054_FBE R2039_FBE R2040_FBE R2041_FBE A17 B17 B19 A19 B18 A18 B16 A16 B15 A15 B14 A14 0ohm 0ohm 0ohm 0ohm 0ohm 0ohm 0ohm 0ohm 0ohm 0ohm 0ohm 0ohm LV_O(0:11) LV_O(7) LV_O(6) LV_O(10) LV_O(11) LV_O(8) LV_O(9) LV_O(4) LV_O(5) LV_O(2) LV_O(3) LV_O(0) LV_O(1) F17 G17 R2053 R2061 G18 F18 0ohm 1Kohm INT# SVP_ADC_RESET VS DPB_HS HS DPB_VS V19 P17 P19 DPA_VS DPA_HS V20 Y19 Y15 Y20 1 RESET R2011 R20 DPA_CLK INTN DPB_DE DP_B[9] P1 P2 N1 1 P5 T10 TB1M 1 10Kohm 10Kohm 10Kohm R5 REGVCC T11 R2015_UX DSCL DGND PWR5V WS DSDA V11 SD0 SCDT AUDIOCLK V5 V7 W5 W12 SCK SPDIF VREFN_1 W7 PC_R VREFP_1 VREFP_2 VREFN_2 Y7 A20 U8 PC_G B20 C20 D19 D20 F19 W10 PC_B NC NC NC NC NC NC F20 E19 E20 NC NC NC H19 G20 G19 NC NC NC H20 TC1P DP_B[15] W20 T17 R19 AVSSLLPLL DPB_CLK T18 TC1M DP_A[0] T20 AVDDLLPLL DP_A[1] VDDC R16 HDMI_PC_G_COMP_Y(1) HDMI_PC_G_COMP_Y(0) HDMI_PC_B_COMP_Pb(1) HDMI_PC_B_COMP_Pb(0) HDMI_PC_R_COMP_Pr(1) HDMI_PC_R_COMP_Pr(0) TD1P T19 PX_VD1.2_LOCAL T14 U20 TD1M V18 T15 U18 U19 TE1P AVDDAPLL W19 T1 E4 AIN_V AVSSAPLL DP_A[2] R2 TE1M W18 E7 V1 AIN_H DP_A[5] E2 U1 TCLK1M DP_A[6] E8 U10 TCLK1P FB1 DP_A[3] PC_V_SYNC PX_AVDDAPLL PX_AVSSAPLL PX_AVDDAPLL PX_AVSSAPLL PVCC FB2 DP_A[4] C2045 10nF FS1 Y18 C2043 10nF AVCC ANTSTO FS2 Y17 C2042 1uF AVCC W17 B4 V10 PR_R3 V17 C2040 1uF C4 0ohm 0ohm AVCC IC2001-2 SVP-UX68 PR_R2 DP_A[7] D4 R2032_UX R2033_UX PC_H_SYNC PR_R1 U17 D5 AVCC U16 Y5 PB_B3 DP_A[9] U4 D11 RXC- DP_A[10] V4 RXC+ V16 100nF TMDS_GND PB_B2 DP_A[12] C2101 W4 C PB_B1 DP_A[11] W8 TMDS_GND DP_A[13] Y8 CVBS_OUT2 V15 100nF 100nF V8 AV_CVBS_IN E5 Y9 TMDS_GND Y16 C2096_UX C2097_UX VDDMQ E6 V9 W9 Y10 COMP_Pr PC2_RED C2044 10nF 100nF 100nF 100nF TMDS_GND CVBS_OUT1 W16 C2091 C2092_UX C2093_UX SVHS_C COMP_Pb PC2_BLUE Y_G3 W15 C2027 10nF V2 DP_A[14] C2041 1uF E9 Y6 RX0TMDS_GND DP_A[15] E10 W2 RX0+ Y_G1 Y_G2 DP_A[16] C2039 1uF E11 75ohm RX1- PLF2 CVBS1 DP_A[17] F5 R2055 10000nF V6 V14 VDDH_B3.3V G5 W6 RX2RX1+ U15 L16 100nF 100nF 100nF RX2+ XTALO MLF1 U14 M16 C2089 Y4 C2086_UX C2087_UX C2088 XTALI W14 T12 P16 N16 R4 DP_A[20] COMP_Y PC2_GREEN SVHS_Y AV_CVBS_OUT T13 E12 Y1 U2 DP_A[21] 1Kohm 33ohm DP_A[18] C2017 1uF R2008 B3 F16 W1 R2025 DP_A[19] C6 PX_MLF1 PX_PLF2 Y14 A5V_1 C9 Y13 C2082 18pF D2 NC NC H8 C12 R2152 R2151 R2150 C2121 100nF R2052 470ohm R2062 0ohm 0ohm R2068 1 W11 TP_UX1 0ohm 0ohm R2066 R2067 24.0MHz H9 P20 X2001 1Mohm H10 R17 R2021 H11 R18 18pF H12 NC H13 4C-49/SM5H,24MHZ,16PF NC C2080 J8 K16 VDDC VDDC VDDC J5 K5 J16 H5 H16 G16 E15 E14 E13 D15 D14 D13 C15 K4 K3 E3 C14 B9 B6 B12 J9 0ohm B2 K2 A9 A13 DDR_MD(3) DDR_MD(2) DDR_MD(1) DDR_MD(0) D12 VDDC VDDC VDDC MD[4] VDDC VDDC VDDC VDDC MD[5] VDDC MD[6] VDDC VSSR VDDC MD[7] VDDC VSSR VDDC VDDR MD[8] VDDC MD[9] VDDC VDDR BA1 MD[10] BA0 VDDM MVREF VDDM MD[11] DQS[0] VDDM MD[12] DQS[1] MD[13] DQS[2] VDDM DQS[3] MD[14] CLKE VDDM DQM[0] VDDM DQM[1] VDDM MD[15] DQM[2] MD[17] MD[16] J12 W13 VDDM 0ohm 0ohm 0ohm 0ohm 0ohm 0ohm 0ohm 0ohm 0ohm 0ohm 0ohm 0ohm J10 V13 MD[18] R2070_FBE R2072_FBE R2074_FBE R2076_FBE R2078_FBE R2080_FBE R2082_FBE R2084_FBE R2086_FBE R2088_FBE R2090_FBE R2092_FBE J11 DP_A[22] VDDM J13 DP_A[23] VDDM K8 DP_B[8] VDDM MD[19] K9 Y12 MD[21] MD[20] K10 U13 VDDM 1 K11 1 MD[22] K13 K12 1 L8 L9 L10 L5 VSS VSS VSS VSS VSS M8 L11 L12 VSS M9 M10 M11 L13 VSS VSS VSS VSS VSS N8 M12 VSS N9 N10 N11 N12 M13 VSS VSS VSS VSS VSS VSS T16 P18 N13 VSS VSS VSS T3 W3 AVSS_BG_ASS T2 T4 R3 T8 U6 T6 V3 PAVDD1 AVDD3_BG_ASS PAVSS1 PAVSS2 PAVDD2 AVDD_ADC4 AVDD_ADC3 AVDD_ADC2 T9 U7 T7 T5 U5 AVDD_ADC1 AVSS_ADC4 AVSS_ADC3 AVSS_ADC2 AVSS_ADC1 AVDD3_ADC1 Y3 Y2 U3 U9 AVDD3_ADC2 C18 LVDS_VSSO LVDS_VSSO AVSS_OUTBUF AVDD3_OUTBUF E16 C19 E18 D18 C16 LVDS_VSSD LVDS_VSSA LVDS_VSSP LVDS_VDDP LVDS_VDDA E17 C17 D16 VDDH VDDM MD[3] C11 VDDH MD[23] A6 B11 MD[25] MD[24] A12 A11 VDDH DQM[3] A10 MD[26] MCK0# B10 VDDH MCK0 C10 VDDH MD[27] B1 D10 V5SF VDDH MD[28] E1 A8 MD[29] CS0# B8 D9 VSS IC2001-1 SVP-UX68 MD[30] D1 C8 VSS MD[31] CS1# D8 CPU_CS J4 D7 VSS J3 C7 SCL WE# B7 VSS K1 A7 VSS SDA MA[0] D6 VSS RD# MA[1] A5 VSS WR # CAS# B5 ALE RAS# A4 VSS J1 A3 C5 ADDR[0] J2 A2 VSS H4 A1 VSS ADDR[1] H3 C1 VSS ADDR[2] MA[2] C3 C2 VSS ADDR[3] H2 D3 DDR_MD(31) DDR_MD(30) DDR_MD(29) DDR_MD(28) DDR_MD(27) DDR_MD(26) DDR_MD(25) DDR_MD(24) DDR_MD(23) DDR_MD(22) DDR_MD(21) DDR_MD(20) DDR_MD(19) DDR_MD(18) DDR_MD(17) DDR_MD(16) DDR_MD(15) DDR_MD(14) DDR_MD(13) DDR_MD(12) DDR_MD(11) DDR_MD(10) DDR_MD(9) DDR_MD(8) DDR_MD(7) DDR_MD(6) DDR_MD(5) DDR_MD(4) ADDR[4] MA[3] J17 VSS MA[4] H18 ADDR[5] MA[5] J20 H17 VSS MA[6] J19 SDA1 SCL1 CSN ADDR[6] H1 J18 VSS G1 N17 VSS G2 N18 VSS ADDR[7] G3 N19 VSS A_D[0] MA[7] N20 A_D[2] A_D[1] G4 M20 VSS MA[8] M19 A_D[3] MA[9] M18 VSS MA[10] L17 A_D[4] MA[11] L18 M17 VSS VSS F4 L19 VSS A_D[5] F3 L20 A_D[6] F2 100ohm 100ohm 0ohm K17 A_D[7] LVDS_VDDD R2005 R2006 R2007 K18 F1 ALE DOWNLOAD_CE OE 0ohm K19 LVDS_VDDO D17 MCA(0:7) K20 SVPD(7) SVPD(6) SVPD(5) SVPD(4) SVPD(3) SVPD(2) SVPD(1) SVPD(0) MCA(7) MCA(6) MCA(5) MCA(4) MCA(3) MCA(2) MCA(1) MCA(0) R2004 MD[2] SVPD(0:7) VDDH_B3.3V TP01 BUS_STOP LVDS_VDDO 0ohm MD[0] R2003_TEST SDA1 SCL1 MD[1] 0ohm 0ohm B13 R2001_TEST R2002_TEST PX_LVDS_VSS PX_LVDS_VDD * 1 2 3 4 5 C13 CN2001_TEST TXOUTB0TXOUTB0+ TXOUTB1TXOUTB1+ TXOUTB2TXOUTB2+ TXOUTBCLKTXOUTBCLK+ TXOUTB3TXOUTB3TXOUTB4TXOUTB4- PX_AVSS_BG_ASS PX_AVDD3_BG_ASS PX_AVDD3_ADC2 PX_AVDD3_ADC1 PX_AVSS_ADC1 PX_AVSS_ADC2 PX_AVSS_ADC3 PX_AVSS_ADC4 PX_AVDD_ADC1 PX_AVDD_ADC2 PX_AVDD_ADC3 PX_AVDD_ADC4 PX_PAVDD2 PX_PAVSS2 PX_PAVSS1 PX_PAVDD1 PX_AVDD3_BG_ASS PX_AVSS_BG_ASS I2C Chip Debug DP_A[8] MAIN MICOM Up-date B5V_VCCA TP01 SVP-WX68 PX_VL1.2 Power C2021_WX 10000nF 10V C2005_WX 100nF 100nF 100nF 1/10W 390ohm C2153_WXC2154_WXC2155_WX C2156_WX 10000nF 100nF 100nF 100nF 10V 37 38 L2005 2.2uH CLK_WX DE_WX VSOUT_ADC HSOUT_ADC HDMI_PC_R_COMP_Pr(2) HDMI_PC_R_COMP_Pr(3) HDMI_PC_R_COMP_Pr(4) HDMI_PC_R_COMP_Pr(5) HDMI_PC_R_COMP_Pr(6) HDMI_PC_R_COMP_Pr(7) HDMI_PC_R_COMP_Pr(8) HDMI_PC_G_COMP_Y(2) HDMI_PC_G_COMP_Y(3) HDMI_PC_G_COMP_Y(4) HDMI_PC_G_COMP_Y(5) HDMI_PC_G_COMP_Y(6) HDMI_PC_G_COMP_Y(7) HDMI_PC_G_COMP_Y(8) HDMI_PC_B_COMP_Pb(2) HDMI_PC_B_COMP_Pb(3) HDMI_PC_G_COMP_Y(9) HDMI_PC_B_COMP_Pb(4) HDMI_PC_B_COMP_Pb(5) HDMI_PC_B_COMP_Pb(6) HDMI_PC_B_COMP_Pb(7) BD2002 PX_AVDD3_BG_ASS ACB2012L-015-T PX_AVDD_ADC3 PX_AVSS_ADC3 C2046 C2016 1uF 82uF 6.3V PX_AVSS_BG_ASS PX_AVDD_ADC4 PX_AVSS_ADC4 BD2003 103 HWRESET DATACK VDDC A0 SCL GND SDA VDDP 102 C2022 1uF C2023 1uF C2024 1uF 101 PX_LVDS_VSS 100 B3.3VD 99 98 PX_VL1.2 BD2014 97 96 ACB2012L-015-T R2149 95 PX_PAVDD1 94 93 C2020 1uF 92 91 90 C2019 VDDH_B3.3V C2032 10nF C2033 10nF C2034 10nF C2035 10nF PX_MLF1 2.7nF PX_PAVSS1 89 BD2005 PX_REGVCC 88 R2063 87 ACB2012L-015-T PX_PAVDD2 86 80 79 78 77 76 75 74 73 R2118_WX R2119_WX R2120_WX R2121_WX R2122_WX 72 71 70 69 68 10ohm 10ohm 10ohm 10ohm 10ohm 67 HDMI_PC_B_COMP_Pb(1) HDMI_PC_B_COMP_Pb(2) C2030 C2052 1uF PX_DGND PX_PLF2 2.7nF PX_PAVSS2 HDMI_PC_B_COMP_Pb(3) BD2007 HDMI_PC_B_COMP_Pb(4) PX_PVCC HDMI_PC_B_COMP_Pb(5) HDMI_PC_B_COMP_Pb(6) ACB2012L-015-T HDMI_PC_B_COMP_Pb(7) HDMI_PC_B_COMP_Pb(8) HDMI_PC_B_COMP_Pb(9) C2056 1uF TMDS_GND 7 5 3 1 7 5 3 1 81 C2031 1uF HDMI_PC_B_COMP_Pb(0) 15pF 50V 82 HDMI_PC_B_COMP_Pb(2:9) 22ohm 22ohm 2 4 RA2001_WX 6 22ohm 8 1/16W 2 4 RA2002_WX 6 22ohm 8 1/16W BD2008 8 6 4 2 8 6 4 2 1 3 5 7 1 3 5 7 83 C2165_WX 84 15pF 50V R2123_WX R2124_WX 85 C2164_WX 104 2.2uH PX_AVDD_ADC2 PX_AVSS_ADC2 GND GND 105 106 107 GND GND VDDC 108 NC 109 NC GND 110 112 111 NC NC 113 114 NC NC AVDD_ADC 115 GND 116 117 NC 118 NC 120 119 121 NC GND REXT AVDD_ADC 122 123 AVDD_PLL 125 126 124 NC NC GND AVDD_ADC VSOUT HSOUT SOGOUT 39 R2117_WX 10Kohm FIELD/GPO XOUT DATA[10] 36 GND AVDD_MPLL XIN DATA[11] 100ohm 100ohm 100ohm R2147_WX 10Kohm 2.2uH VSOUT_ADC HSOUT_ADC DE_WX CLK_WX PX_AVCC BD2006 ACB2012L-015-T PX_AVDDAPLL ACB2012L-015-T 66 C2055 1uF C2062 1uF 65 C2059 1uF C2060 1uF C2061 1uF TMDS_GND PX_AVSSAPLL 64 R2113_WX R2114_WX R2115_WX VDDP 63 35 GND DATA[12] 34 GND DATA[13] 33 VDDC DATA[14] 32 14.31818MHz DATA[9] AVDD_ADC 62 31 DATA[8] RIN2P RIN2N 61 30 GIN2N 60 29 DATA[15] 28 DATA[7] GIN2P 59 27 DATA[6] DATA[16] 47nF DATA[5] SOGIN2 DATA[17] C2131_WX AVDD_MPLL_3.3V DATA[4] BIN2N 58 26 BIN2P DATA[18] 47nF 25 DATA[19] 24 DATA[3] 57 23 DATA[2] 56 47nF DATA[1] RIN1N 55 C2141_WX 47nF 1nF 22 GND 47nF RIN1P VDDP C2140_WX VDDP DATA[0] IC2002_WX MST3560M-LF-170 GIN1N DATA[20] 21 SOGIN1 GIN1P 54 SCL1 SDA1 20 53 19 DATA[21] SVP_ADC_RESET 18 GND 52 47nF BIN1N DATA[22] 47nF VDDP 51 C2138_WX C2139_WX BIN1P 50 17 GND DATA[23] 16 47nF 47nF 15 GND VDDP 49 C2143_WX 22pF 47nF VDDC HSYNC1 VSYNC1 DATA[24] 47nF C2128_WX RIN0P RIN0N DATA[25] 47nF 1nF NC NC DATA[26] 14 NC GIN0P DATA[27] 13 X2002_WX B3.3VD R2112_WX 10Kohm 12 SOGIN0 GIN0N 48 R2146_WX 11 NC 47 COMP_Pr R2144_WX 9 10 NC BIN0N 46 COMP_Y R2141_WX R2142_WX 47nF BIN0P 45 COMP_Pb R2105_WX 47nF C2126_WX NC DATA[28] PC2_RED R2104_WX C2124_WX GND 44 PC2_GREEN R2102_WX R2103_WX 8 47nF 47nF 6 7 NC DATA[29] R2101_WX PC2_H_SYNC 47nF AVDD_ADC NC R2100_WX C2029_WX 47nF 1nF VDDP NC NC 33ohm C2122_WX C2123_WX 33ohm C2125_WX 33ohm C2127_WX R2241_WX 0ohm R2240_WX 0ohm R2108_WX 33ohm C2129_WX 33ohm C2137_WX 33ohm R2109_WX 33ohm C2136_WX R2110_WX 33ohm 33ohm C2135_WX R2140_WX 33ohm 33ohm C2134_WX C2133_WX R2143_WX 33ohm 33ohm C2130_WX 33ohm R2145_WX 33ohm C2132_WX C2142_WX 22pF L2003 PX_AVDD_ADC1 PX_AVSS_ADC1 PX_LVDS_VDD NC INT R2097_WX 33ohm 68ohm R2106_WX 33ohm R2107_WX 33ohm 2.2uH ACB2012L-015-T VSYNC0 43 5 R2098_WX R2099_WX L2001 C2003 1uF C2144_WX C2146_WX 10000nF 100nF 10V HSYNC0 42 4 VREFN 41 3 127 128 2 40 0ohm 0ohm VREFP C2026_WX 1uF VDDP PC1_V_SYNC PC2_V_SYNC PC2_BLUE PX_AVDD3_ADC2 C2008 1uF PX_VA1.2 L2006 1 R2095_WX R2096_WX PC1_H_SYNC PC1_RED 2.2uH 100nF C2006 1uF AVDD_PLL_3.3V R2148 AVDD_ADC_3.3V C2028_WX 100nF PC1_GREEN L2004 0.5mm C2010_WX 100nF PC1_BLUE HDMI_PC_B_COMP_Pb(8) HDMI_PC_B_COMP_Pb(9) DDR_BA0 DDR_BA1 100nF 100nF C2025_WX 100nF TP04 PX_AVDD3_ADC1 C2149_WX C2150_WX C2151_WX C2152_WX C2145_WX C2147_WX 100nF 100nF C2148_WX B3.3VD C2009_WX 100nF C2013_WX 10000nF 10V 2.2uH C2004 1uF DP_HS C2011 1uF BD2010_WX ACB2012L-015-T C2002_WX 100nF L2002 HDMI_PC_R_COMP_Pr(2:9) C2014 1uF AVDD_MPLL_3.3V C2018_WX 100nF HDMI_PC_G_COMP_Y(2:9) B3.3VD R2139 1Kohm C2007_WX 10000nF 10V C2015_WX 100nF HDMI_PC_R_COMP_Pr(9) AVDD_PLL_3.3V BD2011_WX ACB2012L-015-T B3.3VD BD2013_WX B3.3VD C2001_WX 100nF HDMI_PC_B_COMP_Pb(2:9) B2.5V_DTV BD2012_WX AVDD_ADC_3.3V BD2009_WX ACB2012L-015-T DDR_CLKE DDR_DQS(3) DDR_DQS(2) DDR_DQS(1) DDR_DQS(0) MVREF ADC DDR_MA[0:11] B3.3VD DDR_CS0# DDR_MCLK0 DDR_MCLK0# DDR_DQM(3) DDR_DQM(2) DDR_DQM(1) DDR_DQM(0) DDR_MA(11) DDR_MA(10) DDR_MA(9) DDR_MA(8) DDR_MA(7) DDR_MA(6) DDR_MA(5) DDR_MA(4) DDR_MA(3) DDR_MA(2) DDR_MA(1) DDR_MA(0) DDR_RAS# DDR_CAS# DDR_WE# 1 DP_HS DDR_MD[0:31] HDMI_PC_G_COMP_Y(2:9) 2 4 6 8 2 4 6 8 2 4 6 8 2 4 6 8 2 4 6 8 HDMI_PC_G_COMP_Y(0) RA2003_WX PX_VD1.2 HDMI_PC_G_COMP_Y(1) HDMI_PC_G_COMP_Y(2) 22ohm 1/16W HDMI_PC_G_COMP_Y(3) HDMI_PC_G_COMP_Y(4) RA2004_WX PX_VD1.2_LOCAL HDMI_PC_G_COMP_Y(5) 22ohm 1/16W HDMI_PC_G_COMP_Y(6) C2099 HDMI_PC_G_COMP_Y(7) HDMI_PC_G_COMP_Y(8) RA2005_WX HDMI_PC_G_COMP_Y(9) 22ohm 1/16W HDMI_PC_R_COMP_Pr(2:9) 82uF 6.3V C2105 10nF C2106 10nF C2107 10nF C2108 10nF C2109 10nF C2110 10nF UX_VREFP_2 UX_VREFN_2 HDMI_PC_R_COMP_Pr(1) HDMI_PC_R_COMP_Pr(2) RA2006_WX C2071 1uF C2075 1uF C2111 10nF HDMI_PC_R_COMP_Pr(0) C2070 1uF HDMI_PC_R_COMP_Pr(3) 22ohm 1/16W HDMI_PC_R_COMP_Pr(4) HDMI_PC_R_COMP_Pr(5) HDMI_PC_R_COMP_Pr(6) RA2007_WX C2112 10nF C2113 10nF C2114 10nF C2115 10nF C2116 10nF C2117 10nF C2118 10nF C2119 10nF C2120 10nF UX_VREFP_1 22ohm 1/16W C2073 1uF C2076 1uF HDMI_PC_R_COMP_Pr(7) HDMI_PC_R_COMP_Pr(8) HDMI_PC_R_COMP_Pr(9) UX_VREFN_1 C2072 1uF 8 6 4 2 8 6 4 2 8 6 4 2 8 6 4 2 8 6 4 2 7 5 3 1 7 5 3 1 7 5 3 1 7 5 3 1 7 5 3 1 TP01 1 3 5 7 1 3 5 7 1 3 5 7 1 3 5 7 1 3 5 7 Samsung Electronics 7-7 Schematic Diagram 7-2-6 DDR This Document can not be used without Samsung’s authorization. B2.5V_VDD Power DDR C2202 C2212 BD2201 10000nF 10V C2207 100nF C2209 10nF 10nF C2203 4.7nF VDDMQ C2204 4.7nF C2211 10000nF 10V BD2204 C2201 C2213 C2220 10000nF 10V C2208 10nF 10nF C2215 C2214 10000nF 1 0V C2210 10nF 100nF 100nF VDDM C2221 10nF VSS VSS VSS VSS VSSQ VSSQ VSSQ VSSQ VSSQ VSSQ VSSQ VSSQ VSSQ VSSQ VSSQ VSSQ VSSQ VSSQ VSSQ VSSQ VSSQ VSSQ NC VSSQ NC VSSQ NC NC NC NC NC NC VSS A8/AP VSS A9 VSS VSS A10 A11 VSS DQ0 VSS IC2201 DQ1 VSS EM6A9320BI-4M DQ2 VSS DQ3 VSS DQ 4 VS S 4M X 32 DDR 1105-001791 D Q5 DQ6 DQ7 DQ8 DQ9 VSS VS S V SS V SS VSS DQ10 VDDQ DQ11 VDDQ DQ12 VDDQ DQ13 VDDQ DQ14 VDDQ DQ15 VDDQ DQ16 VDDQ DQ17 VDDQ DQ18 VDDQ DQ19 VDDQ DQ20 VDDQ DQ21 VDDQ J6 J5 H8 H7 H6 H5 G8 G7 G6 G5 F8 F7 F6 F5 E8 E7 E6 E5 D9 D7 D6 D4 J10 J3 H10 H3 F10 F3 E10 E3 D11 D2 B11 B9 B7 B6 VDDQ VDDQ VDD VDD VDD VDD VDD VDD VDD VDD VREF WE# CAS# RAS# CS# CKE CK# CK BA1 BA0 DM2 DM3 DM1 DM0 DQS3 DQS2 VDDQ VDDQ DQS1 DQ22 DQ23 DQS0 22ohm RA2206 VSS A7 DQ31 22ohm RA2205 V SS A6 DQ30 RA2204 22ohm A5 DQ29 22ohm VSS DQ28 RA2203 VSS VSS A4 DQ27 7 5 3 1 7 5 3 1 2 4 6 8 2 4 6 8 RA2202 22ohm NC NC 8 6 4 2 8 6 4 2 1 3 5 7 1 3 5 7 RA2201 22ohm A2 A3 DQ26 2 4 6 8 2 4 6 8 VSS DQ25 1 3 5 7 1 3 5 7 VS S A1 D12 C12 C11 B12 A9 A8 B8 A7 A1 G12 G1 A12 A2 G11 G2 A11 M3 L4 L10 L11 M11 M1 L1 K1 K2 M12 C6 C7 D3 D10 K3 K6 K7 K10 B2 B4 DDR_MD(15) DDR_MD(14) DDR_MD(13) DDR_MD(12) DDR_MD(11) DDR_MD(10) DDR_MD(9) DDR_MD(8) DDR_MD(31) DDR_MD(30) DDR_MD(29) DDR_MD(28) DDR_MD(27) DDR_MD(26) DDR_MD(25) DDR_MD(24) DDR_MD(7) DDR_MD(6) DDR_MD(5) DDR_MD(4) DDR_MD(3) DDR_MD(2) DDR_MD(1) DDR_MD(0) A0 DQ24 DDR_MD[0:31] DDR_MD[0:31] M4 M5 L5 M6 M7 L8 M8 M9 M10 L7 K5 L6 A6 B5 A5 A4 B1 C2 C1 D1 J12 J1 1 H12 H11 F12 F11 E12 E 11 E2 E1 F2 F1 H2 H1 J1 J2 DDR_MA(0) DDR_MA(1) DDR_MA(2) DDR_MA(3) DDR_MA(4) DDR_MA(5) DDR_MA(6) DDR_MA(7) DDR_MA(8) DDR_MA(9) DDR_MA(10) DDR_MA(11) NC DDR_MA[0:11] DDR_MA[0:11] NC M2 L12 L9 L3 L2 K12 K11 K8 G10 G3 B10 B3 J9 J4 H9 H4 G9 G4 F9 F4 E9 E4 D8 D5 C10 C9 C8 C5 C4 C3 A10 A3 K9 K4 J8 J7 Near to DDR C2206 100nF 25V 100nF R2226 1Kohm 22ohm 22ohm 22ohm MVREF DDR_DQM(1) DDR_DQM(3) DDR_DQM(0) DDR_DQM(2) 25V 100nF R2227 1Kohm C2228 R2233 DDR_CLKE DDR_CS0# DDR_RAS# DDR_CAS# DDR_WE# DDR_BA0 DDR_BA1 DDR_MCLK0# DDR_DQM[0:3] DDR_DQS(1) DDR_DQS(3) DDR_DQS(0) DDR_DQS(2) DDR_MD(23) DDR_MD(22) DDR_MD(21) DDR_MD(20) DDR_MD(19) DDR_MD(18) DDR_MD(17) DDR_MD(16) R2228 R2229 R2230 R2231 8 6 4 2 8 6 4 2 7 RA2207 5 3 22ohm 1 7 RA2208 5 3 22ohm 1 22ohm C2227 C2231 51ohm 10nF R2237 51ohm DDR_MCLK0 R3_RING BD2209_FBE B3.3VD 100nF C2305_FBE 100nF C2304_FBE 1nF C2302_FBE 1nF C2301_FBE 1nF C2300_FBE 10nF C2299_FBE 10nF C2315_FBE 10nF C2314_FBE BD2212_FBE 10nF 100nF 10nF C2277_FBE C2274_FBE 100nF 10nF C2276_FBE C2273_FBE 100nF 10nF C2275_FBE C2272_FBE 100nF C2317_FBE C2316_FBE 10000nF 10V 10nF C2298_FBE C2313_FBE ACB2012L-015-T C2312_FBE AVDD33P B3.3VD 100nF FBE ACB2012L-015-T DPLL_AVDD12D PLL_AVDD12A R2318_FBE PLL_FILTER PLL_AVDD12D IC2204_FBE-2 S4LF112X01 K9 K8 K7 J10 J9 B1.25VD_FBE J8 R1_RING J7 H14 H10 BD2211_FBE H9 H7 G10 1nF C2289_FBE 1nF C2288_FBE 10nF C2297_FBE 10nF C2296_FBE 10nF C2295_FBE 10nF C2294_FBE 10000nF 10V H8 10nF C2287_FBE C2293_FBE ACB2012L-015-T G9 G8 G7 D9 C10 G2 G1 H3 H2 B3.3VD J2 J1 K3 N14 H16 E3 R2370_FHD 4.7Kohm R3 K14 I2C_ADDR1 R2371_FBE 4.7Kohm I2C_ADDR0 R2373_FBE 4.7Kohm INPUT_SEL R2372_FBE 4.7Kohm MODE_SEL J15 G14 E14 R2374_HD 4.7Kohm A3 K1 GND_R_RING AVDD33D_2 GND_R_RING AVDD33D_1 GND_R_RING AVDD33A_6 GND_R_RING AVDD33A_5 GND_R_RING AVDD33A_4 GND_R_RING AVDD33A_3 GND_R_RING AVDD33A_2 GND_R_RING AVDD33A_1 GND_R_RING AVDD12IA_2 GND_R_RING AVDD12IA_1 GND_R_RING PWR_R3_RING GND_R_RING PWR_R3_RING GND_R_RING PWR_R3_RING GND_R_RING PWR_R3_RING GND_R_RING PWR_R3_RING GND_R_RING PWR_R3_RING GND_R_RING PWR_R3_RING GND_R_RING PWR_R3_RING GND_R_RING PWR_R3_RING GND_R_RING PWR_R3_RING GND_R_RING PWR_R1_RING GND_R_RING PWR_R1_RING GND_R_RING PWR_R1_RING GND_R_RING PWR_R1_RING AVSS12A_1 PWR_R1_RING AVBBA PWR_R1_RING AVBBD_1 PWR_R1_RING AVSS12D_1 PWR_R1_RING AVSS12A_2 PWR_R1_RING AVBBD_2 PWR_R1_RING AVSS12D_2 PWR_R1_RING AVSS12IA_1 PWR_R1_RING AVSS12IA_2 PWR_R1_RING AVSS33A_1 PWR_R1_RING AVSS33A_2 PWR_R1_RING AVSS33A_3 PWR_R1_RING AVSS33A_4 PWR_R1_RING AVSS33A_5 PWR_R1_RING AVSS33A_6 PWR_R1_RING AVSS33D_1 AVSS33P_2 AVSS33D_2 AVSS33P_1 L3 PLL_FILTER B3 F14 H1 C7 H15 J14 L14 P3 F3 B6 AVDD12IA A7 FBE_RESET R3_RING M14 D6 F13 M13 N8 C8 A5 R2243_FBE 100ohm A14 B14 INPUT_SEL MODE_SEL I2C_ADDR0 I2C_ADDR1 SCL1 SDA1 J16 B9 A9 C5 A4 R2379_FBE R2380_FBE 0ohm 0ohm B4 C4 A8 D7 P8 G13 R7 J4 R1_RING P7 T7 N6 T3 N7 C13 P4 D12 R4 T4 E4 J13 P5 L4 R5 N5 T5 N11 P6 C12 R6 C14 T6 D11 R8 D13 T8 D14 P9 E13 R9 F4 T9 K13 T10 L13 R10 M4 P10 N4 T11 N12 R11 N3 P11 D3 T12 R12 P12 T13 LV_E(11) TESTMODE0 NRESET TEST8 PWM_DIMING TEST7 ANA_DIMING TEST6 INPUT_SEL TEST5 MODE_SEL TEST4 I2C_ADDR0 TEST3 I2C_ADDR1 TEST2 I2C_SCL TEST1 I2C_SDA CLK_OUT TEST0 SCANEN CLK OUT_CLKP_ODD VSYNC_IN OUT_CLKN_ODD HSYNC_IN OUT_FP_ODD DATA_IN_ENB OUT_FN_ODD B_DIN0 OUT_EP_ODD B_DIN1 OUT_EN_ODD B_DIN2 OUT_DP_ODD B_DIN3 OUT_DN_ODD B_DIN4 OUT_CP_ODD B_DIN5 OUT_CN_ODD B_DIN6 OUT_BP_ODD B_DIN7 OUT_BN_ODD B_DIN8 OUT_AP_ODD B_DIN9 OUT_AN_ODD G_DIN0 OUT_CLKP_EVEN G_DIN1 OUT_CLKN_EVEN G_DIN2 OUT_FP_EVEN G_DIN3 OUT_FN_EVEN G_DIN4 OUT_EP_EVEN G_DIN5 OUT_EN_EVEN G_DIN6 OUT_DP_EVEN G_DIN7 OUT_DN_EVEN G_DIN8 OUT_CP_EVEN G_DIN9 OUT_CN_EVEN R_DIN0 OUT_BP_EVEN R_DIN1 OUT_BN_EVEN R_DIN2 OUT_AP_EVEN R_DIN3 OUT_AN_EVEN R_DIN4 IN_CLKP_ODD R_DIN5 IN_CLKN_ODD A6 RA2209_FBE B7 0ohm B8 1 3 5 7 2 4 6 8 7 8 9 10 A10 11 B10 12 13 A11 B11 14 C11 15 A12 16 17 B12 A13 B5 D15 D16 G15 G16 F15 F16 E15 E16 C15 C16 B15 B16 A15 A16 N15 N16 T15 T16 R15 R16 P15 P16 M15 M16 L15 L16 K15 K16 D2 R2366_FBE B3.3VD LV_O(4) LV_O(3) R2389_FBE R2390_FBE LV_O(2) LV_O(1) R2391_FBE R2392_FBE LV_O(0) LV_E(7) M2 R2385_FBE N1 100ohm N2 R2387_FBE R2 R1 100ohm 100ohm 100ohm T1 R_DIN9 IN_4N_ODD IN_1N_EVEN IN_3P_ODD IN_1P_EVEN IN_3N_ODD IN_2N_EVEN IN_2P_ODD IN_2P_EVEN IN_2N_ODD IN_3N_EVEN IN_1P_ODD IN_3P_EVEN IN_1N_ODD IN_4N_EVEN IN_CLKP_EVEN IN_4P_EVEN IN_CLKN_EVEN IN_5N_EVEN IN_5P_EVEN F2 100ohm F1 E2 E1 100ohm C2 C1 B2 100ohm B1 A2 A1 100ohm P2 P1 T2 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 R2388_FBE L2 M1 IN_4P_ODD 20 21 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 LV_O(8) LV_O(5) 100ohm IN_5P_ODD IN_5N_ODD R_DIN8 19 CN2202_HD 0ohm FBE_ODD_TXCLK+ FBE_ODD_TXCLKFBE_ODD_TX5+ FBE_ODD_TX5FBE_ODD_TX4+ FBE_ODD_TX4FBE_ODD_TX3+ FBE_ODD_TX3FBE_ODD_TX2+ FBE_ODD_TX2FBE_ODD_TX1+ FBE_ODD_TX1FBE_ODD_TX0+ FBE_ODD_TX0FBE_EVEN_TXCLK+ FBE_EVEN_TXCLKFBE_EVEN_TX5+ FBE_EVEN_TX5FBE_EVEN_TX4+ FBE_EVEN_TX4FBE_EVEN_TX3+ FBE_EVEN_TX3FBE_EVEN_TX2+ FBE_EVEN_TX2FBE_EVEN_TX1+ FBE_EVEN_TX1FBE_EVEN_TX0+ FBE_EVEN_TX0- R2386_FBE L1 R2383_FBE R_DIN6 R_DIN7 D1 18 SMW200-30C B13 LV_O(10) LV_O(9) P14 LV_E(9) LV_E(10) CLK_EXT C6 R2384_FBE * MODE-SEL : H-FHD, L-HD LV_E(5) LV_E(8) TESTMODE1 LV_O(6) LV_O(11) T1 4 LV_E(3) LV_E(4) TESTMODE2 PLL_EXT_DITHER R2382_FBE P13 LV_E(1) LV_E(2) TESTMODE3 PLL_EXT LV_O(7) R14 LV_E(0) PLL_FILTER 5 6 R2381_FBE R13 7-8 4 IC2204_FBE-1 S4LF112X01 C3 1 M3 100ohm 100ohm 100ohm 38 1 3 5 7 1 3 5 7 1 3 5 7 1 3 5 7 1 3 5 7 1 3 5 7 1 3 5 7 2 4 6 8 2 4 6 8 2 4 6 8 2 4 6 8 2 4 6 8 2 4 6 8 2 4 6 8 RA2212 0ohm 1/16W RA2213 0ohm 1/16W RA2214 0ohm 1/16W RA2215 0ohm 1/16W RA2216 0ohm 1/16W RA2217 0ohm 1/16W RA2218 0ohm 1/16W FBE_ODD_TX0FBE_ODD_TX0+ FBE_ODD_TX1FBE_ODD_TX1+ FBE_ODD_TX2FBE_ODD_TX2+ FBE_ODD_TXCLKFBE_ODD_TXCLK+ FBE_ODD_TX3FBE_ODD_TX3+ FBE_ODD_TX4FBE_ODD_TX4+ FBE_ODD_TX5FBE_ODD_TX5+ FBE_EVEN_TX0FBE_EVEN_TX0+ FBE_EVEN_TX1FBE_EVEN_TX1+ FBE_EVEN_TX2FBE_EVEN_TX2+ FBE_EVEN_TXCLKFBE_EVEN_TXCLK+ FBE_EVEN_TX3FBE_EVEN_TX3+ FBE_EVEN_TX4FBE_EVEN_TX4+ FBE_EVEN_TX5FBE_EVEN_TX5+ 39 MGND1 40 41 IP125-V41R-C74 0ohm 0ohm 0ohm 0ohm K1 0 AVDD33P_1 CN2203_FHD R2307_PDP R2308_PDP R2304_OP R2303_OP C9 C2283_FBE 100nF 10nF C2286_FBE C2282_FBE 100nF 10nF C2285_FBE C2281_FBE 10000nF 10V 100nF C2284_FBE 10nF C2280_FBE D4 AVDD33P_2 LOGIC_TX_P LOGIC_RX_P SDA0 SCL0 D5 AVDD12A_1 GND_R_RING 1 2 3 1 D8 BD2210_FBE ACB2012L-015-T GND_R_RING GND_R_RING MGND2 G3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 G4 D10 DPLL_AVDD12A J3 K2 H4 1 1 H13 AVDD12D_1 0ohm PLL_AVDD12D DPLL_AVDD12D AVDD12D_2 GND_R_RING R2297_P12 AVDD12IA DPLL_AVDD12A AVDD12A_2 GND_R_RING 0ohm PLL_AVDD12A K4 GND_R_RING WP_I2C_READY N9 4.7Kohm N10 R2344_PDP 560pF 50V N13 B1.25VD_FBE DPLL_AVDD12A AVDD33P (LCD:OUTPUT, PDP:INPUT) C2320_FBE 2Kohm R2299_DE DPLL_AVDD12A 5.6nF 50V IMG_EINT_P C2319_FBE LV_E(6) Samsung Electronics
Source Exif Data:File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : 3.1-702 Modify Date : 2008:12:26 11:47:27-05:00 Create Date : 2008:12:26 11:47:27-05:00 Metadata Date : 2008:12:26 11:47:27-05:00 Creator Tool : Adobe InDesign CS2 (4.0.4) Format : application/pdf Title : d83a-Copernicus2-np-cover-0.indd Document ID : uuid:91700895-1667-43e8-8f49-0640cf335fe4 Instance ID : uuid:3be395e8-2913-4b5e-9837-d6ac3ee0e8df Producer : Adobe PDF Library 7.0 Has XFA : No Page Count : 69 Creator : Adobe InDesign CS2 (4.0.4) Trapped : FalseEXIF Metadata provided by EXIF.tools