Part A Submission Instructions

User Manual:

Open the PDF directly: View PDF PDF.
Page Count: 3

DownloadPart A Submission Instructions
Open PDF In BrowserView PDF
COMP30024 Artificial Intelligence

Project Part A

Submission Instructions
Sarah Erfani, Matt Farrugia, Chris Leckie
Last updated: 24 March 2018
Submission
One submission is required from each group. That is, one group member is responsible for
submitting all of the necessary files that make up your group's solution.
You must submit a single compressed archive file (e.g. a .zip or .tar.gz file) containing
all files making up your submission via the ‘Project Part A Submission’ item in the
‘Assessments’ section of the LMS.
This compressed file should contain all Python files required to run your program, and
your comments.txt file too.
Running your program
The entry point to your program should be a Python file called ‘parta.py’ (case sensitive).
Note that you may structure your program over multiple Python files, but we will look for a
file called parta.py when testing your program.
When marking your program, we will run your program with a command of the form:
python parta.py < input.txt
where
•
•

python is the name of a Python 3.6 interpreter, and
input.txt is the name of a file containing a board configuration and a command, as
per the specification for Project Part A.

We will test your program on the Melbourne School of Engineering Student Unix machines
(e.g. dimefox.eng.unimelb.edu.au or nutmeg.eng.unimelb.edu.au). If you develop
your program with a different version of Python, it is your responsibility to make sure it runs
correctly using Python 3.6 on the Student Unix machines.
Test cases
Please download the following input files and their corresponding sample output files. You
can use these to test the format of your program’s output. Keep in mind that your program
will be tested on more inputs after submission, and that for some ‘Massacre’ inputs there
may be multiple correct output sequences meaning your output might be different from the
output provided. You don’t need to worry about having a different (but correct) output
sequence as long as you make sure your output is formatted correctly.

Input file
move-sample-1.in
move-sample-2.in
move-sample-3.in
massacre-sample-1.in
massacre-sample-2.in
massacre-sample-3.in

Sample output file
move-sample-1.out
move-sample-2.out
move-sample-3.out
massacre-sample-1.out
massacre-sample-2.out
massacre-sample-3.out

For example, to test your program against the first ‘Massacre’ sample (massacre-sample1), you would run the following command:
python parta.py < massacre-sample-1.in
and then compare the output of your program to massacre-sample-1.out.
Warning: These files contain Unix-style newlines. They will not display properly in some
text editors, including the default Windows text editor Notepad.
Assessment
Please see the original specification partA-spec-2018.pdf for details on how Project Part A
will be assessed.
In addition, please note the following:
•
•

For Project Part A, your program must only use tools from the Python Standard
Library. You may not use third-party packages. In particular, you must not use numpy
in your program (even though it is available under dimefox’s Python 3).
Your program must not use multithreading (even though the tools for writing multithreaded Python programs are part of the Python Standard Library).

Finally, please note that for the tests we use to assess your program in calculating
‘Massacre’, your program will be subject to a time limit and may be terminated before
finishing its computation if it is taking too long.
In order to guarantee that you are able to pass all of our tests (assuming you have an
otherwise correct implementation), you should ensure that your program is able to find move
sequences involving up to five moves (total) for up to five White pieces in under 30
seconds on dimefox. Note also that our largest tests will represent only a small portion of
all tests, most tests will be significantly smaller.
Submission
The submission deadline for Part A is 4.00pm Friday 30th March 2018.
Late submission
Late submissions will incur a penalty of two marks per working day (or part thereof).
If you cannot submit on time you should contact both Sarah (sarah.erfani@unimelb.edu.au)
and Shreyash (spatodia@student.unimelb.edu.au) via email (please use the subject header

“COMP30024 Project A Extension”) at the soonest possible opportunity (ideally before the
deadline). If you have a medical reason for being late, you will be asked to provide a medical
certificate. We will then assess whether an extension is appropriate. Requests for
extensions on medical grounds received after the deadline may be declined. Note that
computer systems are often heavily loaded near project deadlines, and unexpected network
or system downtime can occur. You should plan ahead to avoid leaving things to the last
minute, when unexpected problems may occur. Generally, system downtime or failure will
not be considered as grounds for an extension.
Academic integrity
There should be one submission per group. You are encouraged to discuss ideas with your
fellow students, but your program should be entirely the work of your group. It is not
acceptable to share code between groups, nor to use the code of someone else. You should
not show your code to another group, nor ask another group to look at their code. If your
program is found to be suspiciously similar to someone else's or a third party's
software, or if your submission is found to be the work of a third party, you may be
subject to investigation and, if necessary, formal disciplinary action.
Please refer to the ‘Academic Integrity’ section of the LMS, and to the university’s academic
honesty website http://academichonesty.unimelb.edu.au/ if you need any further clarification
on these points.
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 3
Title                           : partA-submit-2018
Author                          : Matt Farrugia and Shreyash Patodia
Subject                         : 
Producer                        : Mac OS X 10.11.6 Quartz PDFContext
Creator                         : Word
Create Date                     : 2018:03:23 23:02:18Z
Modify Date                     : 2018:03:23 23:02:18Z
EXIF Metadata provided by EXIF.tools

Navigation menu