Pentax GPS Receiver WG 2 Optio Digital Camera Quick Guide

User Manual: Pentax GPS Receiver WG-2

Open the PDF directly: View PDF .
Page Count: 2

2

2

1

1

MENU

Cancel

Date Adjustment

Date Format

mm

/dd/yy

24

h

Date

Time

01/01/2012

00:00

Settings complete

OK

OK

MENU

Cancel

Date Adjustment

Date Format

mm

/dd/yy

24

h

Date

Time

01/01/2012

00:00

Settings complete

MENU

Cancel

City

DST

New York

Hometown

OK

OK

MENU

Cancel

Initial Setting

Hometown

New York

Settings complete

English

DST

OFFOFFOFF

MENU

Cancel

Initial Setting

Hometown

New York

Settings complete

English

DST

OFFOFFOFF

P

14:2514:2514:25

383 838

+1.0

+ 1 . 0+1.0

1/250

1/2501/250

F3.5

F 3 . 5F3.5

DATE

02/02/'12

Names of Parts and Monitor Indicators

Checking the Contents of the Package

Preparing the Camera for Use Turning the Camera On

In this Quick Guide,

the arrow keys to

be pressed are

indicated as shown

on the right.

Check that your camera comes complete with

the items listed below.

Operating Manual

Utilities Guide for GPS (WG-2 GPS only)

Quick Guide (this guide)

Carabiner strap

(O-ST124/O-ST125)

AC plug cord Macro stand (O-MS1)

Battery charger (D-BC92)Rechargeable lithium-ion

battery (D-LI92)

USB cable (I-USB7)Software (CD-ROM)

S-SW125

Camera (Optio WG-2 GPS /

Optio WG-2)

The Optio WG-2 GPS / Optio WG-2 is waterproof, dustproof,

and shockproof, as shown below, so you can use it in a

wide range of outdoor activities.

Waterproof/dustproof: JIS grade 8 waterproof and grade 6

dustproof (IP68)

Shockproof: Satisfies Pentax drop test (1.5 m height onto

a 5 cm thick plywood surface) complying with MIL-

Standard 810F Method 516.5-Shock testing.

* Waterproof performance is not guaranteed if the camera

is exposed to impact such as being dropped or hit.

* The camera is not guaranteed to be free of trouble or

damage under every condition.

Battery Level Indicator

You can check the battery level by the indicator on the display.

Battery Status

Adequate power remains.

Battery is running low.

Battery is running very low.

Battery is exhausted.

The camera turns off after this message appears.

Screen Display

(green)

(green)

(yellow)

(red)

[Battery depleted]

Front

Back

Prepare your camera for use before you begin

using it.

Attach the carabiner strap

supplied with the camera

as shown in the illustration.

Install the battery and SD

Memory Card as shown in

the illustration.

Installing the Battery and SD

Memory Card

Attaching the

Carabiner Strap

* The SD Memory Cards are sold separately.

The inside of the battery/card and terminal covers are not waterproof

In locations where the camera is exposed to water or dirt

such as underwater, at the beach, in a kitchen, etc., make

sure that the battery/card and terminal cover lock levers are

firmly locked so that they won't open unexpectedly. Do not

open the covers in such locations.

When removing the battery or card, avoid surroundings where

the camera may be exposed to water or dirt, and make sure the

camera, battery, card, and your hands are completely dry.

Thank you for purchasing this PENTAX digital camera.

Shooting mode

Flash mode

Face Detection

Drive mode

Focus mode

Digital zoom/

Intelligent Zoom

Memory status

Built-in memory

(without card)

SD Memory Card

Card is write-protected

Focus frame Date and

time

Date imprint

setting

Eye-Fi communication status

World Time setting

Pixel Track SR

Aperture

D-Range Setting

Remaining image

storage capacity

EV

Compensation

Normal display in Still Picture Capture Mode

:

No icon Hometown

:Destination

Shutter speed

Battery level

Monitor Indicators

Following indicators are displayed in Still Picture Capture Mode.

Press the power switch. 3

Continue on the reverse side.

12 Press the four-way controller (5) to select [01] (month), [01]

(day) or [2012] (year), then use the four-way controller (23)

to set the current date.

11 Press the four-way controller (5), then press the four-way

controller (3) to move the frame to [Date].

10

Use the four-way controller (45) to

choose a city.

5

Press the four-way controller (3) to

move the frame to [W Hometown].

Press the four-way controller (5) to select [24h], then use

the four-way controller (23)

to select [24h] (24-hour

display) or [12h] (12-hour display).

Press the four-way controller (3) to move the frame to [DST]

(Daylight Saving Time).

6

Use the four-way controller (45) to select O or P and press

the 4 button.

The [Initial Setting] screen reappears.

7

Press the four-way controller (3) to select [Settings complete]

and press the 4 button.

The [Date Adjustment] screen appears.

8

Press the four-way controller (5).

The [W Hometown] screen appears.

4

13 Press the four-way controller (5), then press the four-way

controller (3) to move the frame to [Time].

14 Set the time in the same manner as in .

15

12

Make the Initial Settings.

2

Use the four-way controller (2345 ) to select the desired

language.

The camera turns on and is ready to take

still pictures. Press the power switch

again to turn the camera off.

Memo

If you accidentally select the wrong

language and press the 4 button,

press the four-way controller (5), use

the four-way controller (2345 ) to

select the desired language, and then

press the 4 button. The [Initial

Setting] screen appears in the selected

language.

1

The [Language/ ] screen appears when the camera is turned on for

the first time. Select the desired language and then set the date and time.

Press the 4 button. The [Initial Setting] screen appears.

Press the four-way controller (3)

to select [Settings complete] and

press the 4 button.

9Press the four-way controller

(5) to select [mm/dd/yy], then

use the four-way controller

(23) to choose the date

format.

Formatting an SD Memory Card

Use this camera to format (initialize) an SD Memory Card that is

unused or has been used on other cameras or digital devices.

Be aware that formatting deletes all the data stored in the SD

Memory Card. For how to format an SD Memory Card, refer to

the Operating Manual (p.174).

Flash

Speaker

Microphone

Lens

Remote control

receiver

Remote control

receiver

LED Macro lights

Shutter release button

Self timer lamp/

Focus assist light

Power switch/Power lamp (green)

Battery/card cover

lock lever

Display

Terminal cover

Terminal cover

lock lever

Battery/card cover

PC/AV terminal

HDMI terminal

Battery lock lever

Tripod socket

Battery/card

cover lock lever

SD Memory Card

Battery

Battery/

card cover

Battery

lock lever

SD Memory Card socket

2

3

5

4

2

3

54

2012/01/20 09:22:26 Illustrator 10.0.3 KB532_533_QG_EN_Omote_10e.eps

3

3

Printed in Indonesia R01BAA12

54563

Selecting a Playback Mode

4

4Playing Back Images

Taking Pictures

Selecting the Flash Mode

Each time you press the four-way controller (

4

), the flash mode switches

between the following modes.

Auto

Flash Off

Flash On

Auto + Red-eye

Flash On + Red-eye

Selecting the Drive Mode

Each time you press the four-way controller (

2

), the drive mode switches

between the following modes.

Standard (single-frame)

Self-timer (10 sec.)

Remote Control (3 sec.)

Press the shutter release button halfway.

The focus frame on the display turns green if the

subject is in focus.

The picture is taken.

Aim the camera at the subject, then press the shut

-

ter release button. The flash discharges automati

-

cally depending on the brightness.

Frame the subject using the focus frame on the display.

Press the

W

/

T

button to change the captured area.

You can choose the playback function

you want to use with the Playback

Mode Palette.

For details about how

to use the Optio WG-2

GPS / Optio WG-2 or

instructions on con-

necting the camera to

a computer, refer to

the manual below.

Selecting a Shooting Mode

An explanation appears when you select a shooting mode.

Use the four-way controller (

2

3

45

)

to choose a shooting mode, then

press the OK button.

You can choose the right mode for your particular situation

from the Capture Mode Palette.

Press the four-way controller (

3

).

Use the four-way controller (

2

3

45

)

to choose a playback mode, then

press the OK button.

3

2

1

4

Memo

Memo

Memo

Memo

Memo

Selecting the Focus Mode

Each time you press the four-way controller (

), the focus mode switches

between the following modes.

Standard

Macro

1cm Macro

Pan Focus

Infinity

Manual Focus

For details, refer to the Operating Manual (p.91).



The functions available in shooting mode may be different.



You can select

Z

(2 sec. Self-timer) by pressing the four-way

controller (

3

) and then (

5

) after selecting

g

.



You can select

h

(0-sec Remote Control) by pressing the four-way

controller (

3

) and then (

5

) after selecting

i

.



For details, refer to the Operating Manual (p.81 - 84

).



The functions available in shooting mode may be different.



For details, refer to the Operating Manual (p.90).

Press the four-way controller (

3

) while

an image is displayed in playback mode.

An explanation appears when you

select a playback mode.

Widens the area

that is captured

by the camera

Enlarges

the subject

Press the shutter

release button fully.

Optio WG-2 GPS /

Optio WG-2

Operating Manual

The monitor display in 4:3 aspect ratio

When [Recorded Pixels] is set to /

6

/

f

/

h

/

l

/

m

in [

A

Rec. Mode], the aspect ratio of the image is 4:3 and the monitor

display for shooting and playback mode is as shown below.

For details on how to select the Recorded Pixels, refer to the

Operating Manual (p.96).

PENTAX RICOH IMAGING CO., LTD.

http://www.pentax.jp

PENTAX RICOH IMAGING FRANCE S.A.S.

(European Headquarters)

HQ http://www.pentax.eu

France http://www.pentax.fr

PENTAX RICOH IMAGING DEUTSCHLAND GmbH

http://www.pentax.de

PENTAX RICOH IMAGING UK LTD.

http://www.pentax.co.uk

PENTAX RICOH IMAGING

AMERICAS CORPORATION

http://www.pentaximaging.com

PENTAX RICOH IMAGING CANADA INC.

http://www.pentax.ca

The confirmation screen appears.

Play back the image you want to delete.

Press the

i

button.

2

1

Use the four-way controller (

2

) to select [Delete].

3

Press the OK button.

4

Memo



You can delete several images selected from the 6- or 12-image

display. For details, refer to the Operating Manual (p.136)

.



You can delete all images at once. For details, refer to the

Operating Manual (p.137).



You can protect stored images from being accidentally deleted.

For details, refer to the Operating Manual (p.138).

You can play back the captured images on t

he display.

Playing Back Images

The image appears on the display.

Press the

Q

button after shooting.

Deleting a Single Image

You can delete a single image currently displayed on the display.

Deleting Images

1



To play back the previous or next image, press the four-way

controller (

45

).



Pressing

f

button during playback displays 6 thumbnail images.

Pressing

f

again in 6-image display switches to 12-image

display. Pressing

f

yet again switches to folder or calendar

display. For details, refer to the Operating Manual (p.124).

Memo

Landscape

For capturing landscape

views. Enhances colors

of sky and foliage

1/2

OK

OK

MENU

Cancel

1001 0 0 -0017

0 0 1 7100-0017

OKOKOK

Delete

Cancel

OK

OKOK

383 838

P

OKMENU

1/2

For continuously playing

back images. Screen or

sound effects can be set

OKCancel

Slideshow

1001 0 0 -0038

0 0 3 8100-0038

0 2 / 0 2 / ' 1 2 1 4 : 2 502/02/'12 14:25

EditEditEdit

W

T

F4.6F 4 . 6F4.6

1/250

1 / 2 5 01/250

383 838

2012/01/19 16:47:13 Illustrator 10.0.3 KB532_533_QG_EN_Ura_10e.eps