PowerLab Teaching Series Owner's Guide (15T, 26T, 2/26, 4/26) Power Lab OG

• Contents
• Safety Notes
• 1. Overview
  • How to Use This Guide
  • Software Installation
  • PowerLab Check
  • The PowerLab
    • The Front Panel
      • Indicators
      • Trigger
      • Analog Output
      • Analog Inputs
      • Isolated Stimulator
      • The Bio Amp Inputs (Inputs 3 and 4)
    • The Back Panel
      • Audio Connector
      • I2C Connector
      • USB Connector
      • Digital Input and Output Connectors
      • Ground Connector
      • Power Connector
  • The Bio Amp Cable
  • Other ADInstruments Hardware
• 2. Setting Up
  • The PowerLab Self-test
  • Connecting the PowerLab
  • ADInstruments Software
    • LabTutor Software
    • LabChart Software
    • The Isolated Stimulator
      • Choosing How Stimulation Should Start
      • Choosing a Stimulus Type
      • Creating a Custom Stimulus Waveform
      • Setting Stimulus Parameters
      • Marker Channel
      • The Stimulator Panel
    • The Bio Amp
      • Signal Display
      • Setting the Range
      • Filtering
      • Inverting the Signal
      • Units
• A. Technical Aspects
  • How it Works
    • The Analog Inputs
    • The Analog Outputs
    • The External Trigger
    • Bio Amp Input (Inputs 3 & 4)
    • The Isolated Stimulator Output
    • PowerLab Accuracy
  • Connectors
    • Digital Input and Output
    • I2C Expansion Connector
    • Input Connectors
    • USB Connection
  • Earthing and Ground Loop Noise
• B. Specifications
  • Analog Inputs
  • Pod Connectors (DIN)
  • Sampling
  • Bio Amp Input – Inputs 3 & 4 (PowerLab 15T & 26T)
  • Output Amplifier
  • Isolated Stimulator Output (PowerLab 15T & 26T)
  • External Trigger (not on PowerLab 15T)
  • Expansion Ports (not on PowerLab 15T)
  • Microprocessor and Data Communication
  • Physical Configuration
  • Operating Requirements
  • Electromagnetic Compatibility
    • Emissions
    • Immunity
    • Separation Distances
• Glossary
• Index