Quickstart Guide MK5 RSU V0.1
User Manual:
Open the PDF directly: View PDF 
.
Page Count: 5
Cohda Wireless Pty Ltd Confidential Information
1
MK2 / MK3 ASD Quick Start (Tablet / Mobile Phone)
MK
5
User Manual
–
Annex A
RSU Quick Start
Version:
0.
1
GNSS Antenna
1
Unpack the MK5 RSU / RSU Kit
Following items are included in the MK5 RSU shipment.
Tab *
MK5 RSU *DSRC Antenna
(*Bundled with RSU Kit)
IP67 Ethernet Mating
Connector
*Self-Fusing
Rubber Tape
Remark:
-Photos are meant for illustration purpose only. The supplied items may look different from
the photos.
*Bundled with RSU Kit
*Stainless Steel Straps
*Pole Mount Bracket
and screws
2
Connecting MK5 RSU Kit
2.1 Connect GNSS and DSRC antennas.
2.2
Wrap the N-connector and antenna joints with provide Self-Fusing Rubber Tape to
prevent water intrusion.
-Cut a small length (10cm) of Self-Fusing tape.
-Remove backing film.
-Begin wrapping Self-Fusing tape around the N-connector and antenna joint. Stretch tape
to 300% and wrap it spirally around the object with a 50% overlap.
-Repeat steps and ensure at least one complete wrap is applied.
-Cut off any excess.
Ensure surface
is clean
Stretch tape
and wrap
Done
2.3 Construct Ethernet using T-568B pin assignment. The MK5 RSU can only be powered
through Ethernet port, it supports either Mode A (Endspan) or Mode B (Midspan).
2.4 Mounting bracket is attached to RSU by default. Both vertical and horizontal mounting
are supported.
2.5 Bracket can be mounted to Pole using the provided Stainless Steel straps or can be bolt to
wall through four mounting holes at bracket.
Horizontal Mount Vertical Mount
RSU attached to
horizontal pole.
3
Link to Documentation and Software Support
Please register at Cohda Wireless Support Website
It can be accessed in two ways:
• Directly via https://support.cohdawireless.com
• Through the “Customer Support” on the Cohda Wireless website
www.cohdawireless.com
On the signup page that opens, enter your name and email address in order to register for
Support and access to technical documentation.
Your email address has to be the Company email address and not your personal email
address.
Please submit a support request by clicking on the button “Submit a request” to ensure your
account is validated.
Once your account has been validated and you have logged into the Customer Support website,
you will have access to the information on all Cohda products, how to develop applications and
FAQs.
If you have purchased the SDK license, this will be made available to you via the Cohda
Wireless Support website upon account validation.
