RFXtrx User Guide
User Manual:
Open the PDF directly: View PDF 
.
Page Count: 54
| Download | |
| Open PDF In Browser | View PDF |
RFXtrx USB RF transceiver User guide www.rfxcom.com Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 1 / 54 1. Table of Contents 1. 2. Table of Contents ................................................................................................................ 2 RFXtrx general information .................................................................................................. 4 2.1. RFXtrx315 supported protocols .................................................................................... 4 2.1.1. RFXtrx315 configured for 310MHz ........................................................................ 4 2.1.2. RFXtrx315 configured for 315MHz ........................................................................ 4 2.1.3. RFXtrx868X .......................................................................................................... 4 2.2. RFXrec433, RFXtrx433, RFXtrx433E supported protocols ........................................... 5 2.2.1. By function ............................................................................................................ 5 2.2.2. Alphabetic list ...................................................................................................... 10 2.3. undec on .................................................................................................................... 16 2.4. Sensitivity influenced by enabled protocols ................................................................ 17 2.5. RF range reduction..................................................................................................... 18 2.6. Home Automation software ........................................................................................ 18 2.7. Dimensions ................................................................................................................ 18 2.8. Electrical .................................................................................................................... 18 2.9. Environmental conditions ........................................................................................... 18 3. Install the USB driver ......................................................................................................... 19 4. Run RFXflash on Linux under Mono .................................................................................. 19 5. RFXmngr test program ...................................................................................................... 20 5.1. Receiver ..................................................................................................................... 21 5.2. Transmitter ................................................................................................................. 22 6. Flash update of the RFXtrx ................................................................................................ 23 6.1. Update firmware in the RFXtrx ................................................................................... 23 6.2. Update firmware in the RFXtrx step by step ............................................................... 24 7. RFXtrx433 special device codes ....................................................................................... 26 7.1. Remote commands .................................................................................................... 26 7.1.1. X10 RF Remote .................................................................................................. 26 7.1.2. ATI Remote Wonder............................................................................................ 27 7.1.3. ATI Remote Wonder Plus .................................................................................... 28 7.1.4. Medion Remote ................................................................................................... 29 7.2. Harrison address conversion to switch settings .......................................................... 30 7.3. Flamingo, AB400, IMPULS, Sartano, Brennenstuhl, SilverCrest 91089, Cranenbroek switch settings ...................................................................................................................... 31 7.4. Energenie 5-gang 429.950 ......................................................................................... 32 7.5. Phenix, IDK YC-4000S switch settings ....................................................................... 33 7.6. HE105 switch settings ................................................................................................ 34 7.7. HQ COCO-20 ............................................................................................................. 35 7.8. MDREMOTE V106, V107 ........................................................................................... 36 7.9. MDREMOTE V108, EKAB-10KRF ............................................................................. 36 7.10. Aoke relay............................................................................................................... 36 7.11. SEAV TXS4 ............................................................................................................ 37 7.12. How to find the dx.com RGB LED strip driver ID ..................................................... 37 7.13. How to find the dx.com RGB LED strip driver ID (rev. 2) ......................................... 37 7.14. How to find the Eurodomest ID ............................................................................... 37 7.15. How to find the Screenline ID.................................................................................. 38 7.16. How to find the Avantek remote ID.......................................................................... 38 8. Blyss commands ............................................................................................................... 39 9. Somfy RTS ........................................................................................................................ 40 10. BlindsT6......................................................................................................................... 41 10.1. Dooya DT52E, DT82TV, DT82TN .......................................................................... 41 11. Lucci Air fan ................................................................................................................... 41 12. Transmit undecoded ARC commands. .......................................................................... 42 13. MCZ pellet stove. ........................................................................................................... 43 14. Lighting4 devices ........................................................................................................... 44 14.1. Proluxx projection screen ........................................................................................ 44 14.2. Kingpin (KP100) projection screen.......................................................................... 44 14.3. Mercury remote control mains sockets.................................................................... 44 Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 2 / 54 14.4. Conrad 034911 sockets .......................................................................................... 44 14.5. Sonoff ..................................................................................................................... 45 14.6. PT2262 and EV1527 oscillator resistors accepted .................................................. 45 15. FAQ ............................................................................................................................... 46 15.1. Receive has stopped suddenly but transmit works.................................................. 46 15.2. Can I increase the receive/transmit range of the RFXtrx? ....................................... 46 15.3. The RFXtrx USB connection disconnects sometimes. ............................................ 46 15.4. I have a 433.92MHz sensor/remote but this device is not received. ........................ 46 15.5. The wall plug is switched by the remote. The remote is received but the RFXtrx does not switch the module. .......................................................................................................... 46 16. EC Declaration of Conformity......................................................................................... 47 17. Warning: ........................................................................................................................ 48 18. License .......................................................................................................................... 48 19. Copyright notice ............................................................................................................. 48 20. Revision history ............................................................................................................. 49 Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 3 / 54 2. RFXtrx general information The RFXtrx transceivers and RFXrec receivers are communicating over an USB port with the Home Automation application. The RFXtrx/rec is powered by the USB port. At startup the RFXtrx enters for 2 seconds the boot loader (red LED is on) and after this it starts the receive/transmit firmware. If valid (decode-able) packets are received the yellow LED will blink. The RFXtrx315 and the RFXrec433 are mainly for use in the US. The RFXtrx315 can receive US X10 lighting and security sensors or US Visonic PowerCode sensors at 315MHz. The RFXrec433 can receive weather sensors of different brands at 433.92MHz. The RFXtrx433 is a transceiver (transmitter+receiver) and can receive and control a large number of sensors and other devices. The RFXtrx433E is an extended RFXtrx433 transceiver. Note: the listed protocols and brands are supported! 2.1. RFXtrx315 supported protocols 2.1.1. RFXtrx315 configured for 310MHz Protocol Protocol receive transmit US X10 lighting US X10 security X10 X10 Y Y Y Y Protocol receive transmit Lighting5 Lighting4 Keeloq Visonic Visonic Y Y Y Y Y Y Y Protocol receive transmit Alecto FS20 Itho Keeloq Visonic Visonic Y Y Y Y Y Y Y Y - 2.1.2. RFXtrx315 configured for 315MHz Protocol Aoke relay PT2262, EV1527 and compatibles Keeloq (unencrypted part only) Visonic CodeSecure (unencrypted part only) Visonic PowerCode 2.1.3. RFXtrx868X Protocol Alecto ACH2010 FS20 Itho CVE RFT Keeloq (unencrypted part only) Visonic CodeSecure (unencrypted part only) Visonic PowerCode Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 4 / 54 2.2. RFXrec433, RFXtrx433, RFXtrx433E supported protocols 2.2.1. By function Curtains, shades, projection screen, awning, gate openers A-OK blind motors (RF01,AC114,AC123,AC127,AC129 controlled) - http://www.motorisationplus.com/ ASA ETR blind motors - http://www.asa-mingardi.org/en/home.php ASP blind motors - http://www.asp-distribution.com/site%20volet/voletrenovation.aspx BOFU EY1612 blind motors - http://www.bofumotor.com/ BTX blind motors, remote, part# 490.2076 – http://www.btxinc.com Brel blind motors - http://www.brel-motors.nl/webshop/motoren/ Chamberlain CS4330CN http://www.chamberlain24.de/epages/es122868.sf/en_GB/?ObjectPath=/Shops/es122868/Products/RA4336 Confexx CNF24-2435 Dolat DLM-1 controlled motors - http://www.dolat.com.cn/product1.asp?id=538 Dooya blind motors, remotes tested: DC305,DC306,DC307,DC313,DC1602,DC1650,DC1651,DC2700 Ematronic - http://www.ematronic.com/moteurs-volet-roulant/ ESMO blind motors Forest blind/curtain motors - http://www.forestgroup.nl/index_nl.html Harrison curtain – http://www.harrison.nl/home2.htm Hasta blind motors - http://www.hasta.se/ JVS screens - http://www.screen-discount.nl/ Kimex projection screen - https://www.kimexinternational.com/A-9162-ecran-de-projection-electrique-encastrable-3-00-x-1-69m-format-16-9.aspx Kingpin KP100 projection screen Louvolite one touch motorised blinds Luxaflex (RFXtrx433E only) - http://www.luxaflex.se/produkter/luxaflex/rullgardiner/ Media Mount Projector screen Motolux - http://www.motolux.com.au/ Nobily rolladenmotor http://www.nobily.de/rolladenmotor/funk-elektronisch/40mm-achtkantwelle/170/nobily-rolladenmotor-pre4?c=5 Outlook Motion Blinds - https://www.spotlightstores.com/curtains-blinds/indoor-blinds/roller-blinds/project-outlook-motionmotorised-roller-blind/p/BP80360543 Proluxx projection screen Quotidom - http://www.quotidom.com/moteur-tubulaire-radio-quotidom-10-ou-20-nm-volet-roulant-ou-store-banne.html (not the Solutio version) RAEX blind motor (YR1326 controlled) RohrMotor24 RMF blind motors - http://www.rohrmotor24.eu/rohrmotor24 RollerTrol blind motors - http://rollertrol.com/ Screenline motors - http://www.screenline.cz/en/ Silverline Premium - http://www.aluparts.nl Simu (RFXtrx433E only) – http://www.simu.com/ Somfy (RFXtrx433E only) – http://www.somfy.co.uk/ Sunflower brand KT52E motorized Curtain track,Single track, DOOYA motor https://nl.aliexpress.com/item/motorized-Curtain-track-1m-3-3m-wide-Single-track-DOOYA-motor-the-top-motor-brand-in/1939622604.html Sunpery blind motors YOODA blind motors – http://www.sukcesgroup.pl Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 5 / 54 Temperature, humidity, weather sensors Alecto – WSD10,WS1200, WS1700, WS3500, WS4500 Auriol – H13726 Ambient Weather - F007TH Banggood – SKU174397 http://www.banggood.com/433MHz-Wireless-Weather-Station-Digital-Thermometer-Humidity-Sensor-p-965559.html Blyss 630467 Cresta Digimax Digoo DG-R8H Froggit - F007TH Hama – EWS1500 Hideki weather sensors Honeywell – TF-ATS34C Inovalley SM80 with plant probes - http://www.inovalley.com/detail.php?item_id=289 La Crosse Lexibook – SM883 Marquant 943134 Maverick ET-732, ET-733 BBQ/Smoke temperature Meade – TS33F-M, TS34C-M http://www.meade.com/products/weatherstations/sensors.html Meteoscan – W155, W160 Nexa NBA-001 NEXUS – I008T mi.sol WH2 http://www.ebay.com/itm/Transmitter-for-Wireless-Weather-Station-wireless-temperature-sensor-/121664060899 Opus XT300 /Imagintronix Soil sensor http://www.plantcaretools.com/en/webshop/wireless-moisture-sensor-en-detail http://www.ebay.co.uk/itm/Wireless-Soil-Moisture-Sensor/251380900939?pt=UK_Home_Garden_Garden_Plants_Fertiliser_CV&hash=item3a8778244b Oregon Scientific / Huger Pearl NC-7159 http://www.pearl.de/a-NC7159-3041.shtml Prego P-8426 http://www.sunmarket.fi/tuote.asp?TID=11990 Proove –TSS320 & TSS330 fridge/freezer thermometer & outdoor sensors 311346,311501 RFXSensor RUBiCSON – stektermometer 48659, 48695 -pool sensor p48019 Sunvic TLX1206 Sunvic TLX7506 TechnoLine/Proficell http://www.elv.de/output/controller.aspx?cid=74&detail=10&detail2=27621 Telldus Thermo/Hygro sensors 313159 and 313160 - TX95-TH, WS9180-TX104 https://www.lohelectronics.se/hemautomation/433mhz/sensorer-1110/smart-inne-och-utetermometer-med-hygrometer-10396 TFA UPM/Esic (very short receiving range) Ventus – WS155 Viking WT0122 pool thermometer Xiron –EN6 Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 6 / 54 Door/window, smoke and other security sensors Aidebao security Alecto – SA30, SA33 smoke detector AliExpress sensors with EV1572 or PT2262 (PT2262 is preferred) Atlantic security Chacon KD101 smoke detector Chuango security Eminent security Flamingo KD101 smoke detector FA20RF, FA21RF Focus Housegard Origo smoke detector Kerui security https://www.aliexpress.com/item/433-MHz-Wireless-Door-Windows-Sensors-for-KERUI-Alarm-System-Magnetic-DoorSensor-Door-Open-reminder/32590916896.html Meiantech security NEXA KD101/LM101LC smoke detector Renkforce RF101 smoke detector Smartwares RM174RF smoke detector Oregon MSR939 https://www.redealer.de/multimedia/home-living/wetterstationen/bewegungssensor-msr939/a-200667/ Visonic CodeSecure Visonic PowerCode X10 security Appliance modules, dimmers, relays, LED controllers ANSLUT (learning mode) Aoke relay http://www.aliexpress.com/store/product/whose-sale-prices-DC12V10A-Learning-Code-Wireless-Remote-Control-SwitchSystem-1-Receiver-and-1-Transmitter/1211856_1774391429.html Avantek ByeByeStandBy Blyss lighting – http://www.castorama.fr/store/Prise-telecommandee-et-telecommande-BLYSS---Interieur-prod4470026.html Brennenstuhl RC2044, RCS2044N Chacon – http://www.chacon.be/ CoCo – http://www.coco-technology.com/en/home/ Conrad RSL2 – http://www.conrad.com/ce/en/product/640466/FUNK-STECKDOSENSCHALTER-RSLR2 Cotech Smarthome Cranenbroek DI.O – http://www.di-o.be/ DomiaLite Ebode ELRO AB400/AB600 – http://www.elro.eu/en/products/cat/home-automation/home-control1 Energenie ENER010 – 429.935, 5-gang 429.950 - https://energenie4u.co.uk/ Etekcity –http://etekcity.com/p-300-5-pack-wireless-remote-control-outlet-switch-set-with-2-remote-controls-zap-5lx.aspx Eurodomest NL – Action Everflourish EMW100 Flamingo Flamingo FA500D FA500DSS Flamingo Smartwares SF501 FunkBus (Gira, Jung, Insta, Berker) Home Confort – http://www.home-confort.net/en HomeEasy EU – http://www.elro.eu/en/products/cat/home-automation/ HomeEasy UK (including HE105 relay) – http://www.homeeasy.eu/ HQ COCO-20 Ikea Koppla Impuls – NL – Action Intertechno – http://www.intertechno.at/ Kambrook RF3672 – http://www.bunnings.com.au/kambrook-4-piece-indoor-powerpoint-kit-with-remote-control_p7030054 Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 7 / 54 KlikAanKlikUit – http://www.klikaanklikuit.nl/home/ Legrand CAD radio – http://docdif.fr.grpleg.com/general/legrand-fr/NP-FT-GT/FA181DFR.pdf LightwaveRF – http://www.lightwaverf.co.uk/ Livolo - http://www.livolo-france.com/fr/ http://nl.aliexpress.com/w/wholesale-livolo-touch-switch.html Maplin http://www.maplin.co.uk/p/remote-controlled-mains-socket-set-single-n78ka (use Lighting1 – COCO GDR2) MDremote LED dimmer V106, V107, V108, EKAB-10KRF - www.ultraleds.co.uk - http://www.ledstripkoning.nl/accessoires/dimmers-wit/draadloze-dimmer-10-knops-rf/ Mercury appliance modules – http://mercury.avsl.com/product?range=ME5124 NEXA – http://www.nexa.se/ ORNO OTIO Phenix Philips SBC SP370 series Profile Qnect 423000040,423000042 PROmax Proove - http://proove.se/ Quigg RGB LED strip driver dx.com - http://www.dx.com/ order nbr: 130913 (new TRC02 not supported) , RisingSun Sartano Siemens (UK) SilverCrest 91089, 60494, 284705 Unitec 48110 EIM 826 Waveman X10 RTS10 / RFS10 X10 lighting Xdom 67412 Remotes ATI Remote Wonder ATI Remote Wonder Plus ATI Remote Wonder II SEAV TXS4 X10 PC Remote Chimes 1byOne Easy Chime Byron SX chime - http://www.chbyron.eu/Byron/ByronSXRange/68/89/ Byron MP001 Chacon Envivo – ENV1348 HomeEasy KlikAanKlikUit Profiles PAC-326R Belcanto SelectPlus200689101 & SelectPlus200689103 (Action NL) Power, gas water metering Cartelectronic TIC, Encoder, Linky - https://www.cartelectronic.fr/index.php?id_product=124&controller=product cent-a-meter Electrisave OTIO EHS5050 OWL CM113, CM180, CM119, CM160, CM180, CM180i - http://www.theowl.com/ Revolt NC5461 - http://www.pearl.de/a-NC5462-5452.shtml RFXMeter Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 8 / 54 Specials 1byone Wireless Home Security Driveway Alarm http://www.1byone.co.uk/Home-Security/Alarms/O00QH-0511 DEA receivers http://www.deasystem.com/en/accessory/7/receivers (unencrypted only) Lucci Air Fan - http://www.lucciair.com/ MCZ pellet stove Mertik Maxitrol – Fire Place controllers Oregon Scientific Body weight scales – BWR101, BWR102, GR101 Prego P-8426 – sauna temperature sensor http://www.sunmarket.fi/tuote.asp?TID=11990 Smartwares radiator valve http://www.homewizard.nl/smartwares-draadloze-radiatorkraan.html Siemens SF01 - LF959RA50/LF259RB50/LF959RB50 extractor hood Wave Design extractor hood X10 Ninja/Robocam – camera motor Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 9 / 54 2.2.2. Alphabetic list Important notes: - Ext and Ext2 firmware will not operate in the RFXtrx433. - RFXrec firmware is equal to RFXtrx433 – Type1 firmware without the transmit functions. - Protocol enabling is only necessary for receive. Transmit protocols are always enabled. Type 1 Type 2 Ext Ext2 Protocol rec xmit - http://www.1byone.co.uk/Home-Security/Alarms/O00QH0511 - Y Y Y ByronSX Y Y 1byone Easy Chime A-OK blind motors RF01 - Y Y Y ByronSX Y Y Y Y - Y BlindsT2 Y Y ZC11 - http://www.motorisationplus.com/ Y Y - Y BlindsT3 Y Y Aidebao security Alecto – SA30, SA33 smoke detector Alecto – WS1200 Alecto – WS1700 and compatibles, WS3500, WS4500 Alecto – WSD10 Ambient Weather - F007TH ANSLUT (learning mode) Aoke relay - http://www.aliexpress.com/store/product/whose-sale- Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Meiantech Oregon LaCrosse Rubicson Rubicson Oregon AC Y Y Y Y Y Y Y Y Y Y Y Y Y Y Lighting5 Aoke or Lighting1 ARC N Y - - Y Y RFY N Y ASP blind motors - http://www.aspdistribution.com/site%20volet/voletrenovation.aspx Y Y - Y BlindsT11 Y Y ATI Remote Wonder ATI Remote Wonder Plus ATI Remote Wonder II Y Y - - - ATI ATI Y Y Y Y Y - - - ATI Y - Atlantic security Auriol H13726 Auriol Z31055B-TX Avantek Y - Y - Y Y - Y Y Y Y Y Y Y - - - Y Y Y* Y Banggood – SKU174397 Banggood DANIU ByeByeStandBy Byron SX chime Y Y Y Y Y Y - Meiantech Rubicson Rubicson Lighting5 *Lighting4 Rubicson Rubicson ARC Y Y Y Y Y Y Y Y ByronSX Y Y - - Y Y Chime Byron MP001 N Y - http://www.castorama.fr/store/Prise-telecommandee-ettelecommande-BLYSS---Interieur-prod4470026.html Y Y Y - AE Y Y Blyss temperature/humidity 630467 BOFU EY1612 blind motors Y Y Y - AE Y - - http://www.bofumotor.com/ * = receive only in Type2 used to get the remote ID. Y Y Y Y BlindsT0 Y* Y Brennenstuhl RCS2044N Brennenstuhl RC2044 Brel blind motors – http://www.brel- Y - Y - Y - Y Y Lighting4 Lighting4 + AC Y Y Y Y Y Y Y Y BlindsT6 N Y - Y - - BlindsT9 N Y - Y - Y ATI/cartelectronic Y N Device 1byone Driveway Alarm - http://www.motorisationplus.com/ A-OK blind motors AC114,AC123,AC127,AC129, prices-DC12V10A-Learning-Code-Wireless-RemoteControl-Switch-System-1-Receiver-and-1Transmitter/1211856_1774391429.html ASA ETR blind motors - http://www.asa-mingardi.org/en/home.php (only available in hardware version 1.0) - http://www.chbyron.eu/Byron/ByronSXRange/68/89/ Byron MP001 chime Blyss lighting motors.nl/webshop/motoren/ BTX blind motors, remote, part# 490.2076 - http://www.btxinc.com Cartelectronic TIC, Encoder, Linky Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 10 / 54 https://www.cartelectronic.fr/index.php?id_product=124&co ntroller=product cent-a-meter Chacon (learning mode) Y Y Y - Oregon Y - Y Y Y Y AC Y Y Chacon (with address code wheels) Chacon EMW200 Y Y Y Y Y Y Y - ARC Y N Y Y Chacon 54660 (equal COCO GDR2) Y Y Y Y Y Y Y Y always on N Y Y Y - - Y - BlindsT8 N Y Y Y Y Y* Lighting4 Y Y Y Y Y Y AC Y Y Y Y - Y Y - Y Y - Y Y Y ARC Lighting1 COCO GDR2 BlindsT12 Y N N Y Y Y - http://www.conrad.com/ce/en/product/640466/FUNKSTECKDOSENSCHALTER-RSLR2 Y Y - Y RSL Y Y Conrad RSL sensors Conrad RSL2 motion/door-window sensors Cotech Smarthome Cranenbroek Y Y Y Y Y Y Y RSL RSL Lighting4 + AC Lighting1 Impuls Y Y Y N Y Y Y Y Cresta Y Y Y Y Hideki Y - - - Y - KeeLoq Y Y Digimax Digoo DG-R8H Y Y Y - X10 Y - https://www.banggood.com/Digoo-DG-R8H-433MHzWireless-Digital-Hygrometer-Thermometer-WeatherStation-Sensor-for-TH11300-8380-p-1178108.html - - - Y Rubicson Y - Y Y Y Y AC Y Y Y Y Y Y ARC Y Y - Y - - BlindsT10 N Y Y Y Y Y ARC Y Y DC305,DC306,DC307,DC313,DC1602,DC1650,DC1651, DC2700 Y Y Y Y BlindsT6 N Y Ebode Electrisave ELRO AB400 Y Y Y Y Y Y Y - X10 Oregon Y Y Y - - http://www.elro.eu/en/products/cat/homeautomation/home-control1 Y Y Y - Lighting4 Y Y ELRO AB600 Ematronic RF01 Y Y Y Y ARC Y Y Y Y - Y BlindsT2 Y Y Y Y - Y BlindsT3 Y Y Y Y Y Y* Lighting4 Y Y - https://energenie4u.co.uk/ - ENER010 – 429.935, 5-gang 429.950 Y Y Y - N Y Envivo – Chime ENV1348 Y Y Y Y Y N N Y Y - http://www.chacon.be/ Chacon KD101 smoke detector Chamberlain CS4330CN http://www.chamberlain24.de/epages/es122868.sf/en_GB/ ?ObjectPath=/Shops/es122868/Products/RA4336 Chuango * decoded as X10 in Ext2 firmware CoCo (learning mode) - http://www.coco-technology.com/en/home/ CoCo (with address code wheels) CoCo GDR2 (equal Chacon 54660) Confexx CNF24-2435 Conrad RSL2 - TX-320, TS34C, anemometer, UV sensor, rain sensor DEA receivers (unencrypted) http://www.deasystem.com/en/accessory/7/receivers DI.O (learning mode) - http://www.di-o.be/ DI.O (with address code wheels) Dolat DLM-1 controlled motors - http://www.dolat.com.cn/product1.asp?id=538 DomiaLite (with address code wheels) Dooya blind motors, emulate remotes: - http://www.ematronic.com/moteurs-volet-roulant/ Ematronic AC114, AC123 - http://www.ematronic.com/moteurs-volet-roulant/ Eminent * decoded as X10 in ext firmware Energenie ESMO blind motors Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 Lighting1 EMW200 Lighting1 COCO GDR2 Lighting1 Energenie Energenie5 Chime Envivo BlindsT6 page 11 / 54 Etekcity – http://etekcity.com/p-300-5-pack-wirelessremote-control-outlet-switch-set-with-2-remote-controlszap-5lx.aspx Eurodomest Y Y Y - (NL – Action) Lighting1 Energenie5 N Y N Y Lighting4 IT N Y N Y Y Y Lighting1 ARC Or Lighting5 Eurodomest Lighting5 EMW100 * ARC only Y* Y Y* Y* Everflourish EMW100 Flamingo Flamingo FA500D FA500DSS Flamingo KD101 smoke detector FA20RF, Y Y - Y Y - Y Y - Y Y Y Y Y Y always on Y Y Y Y Y Y Y Y Y Y Lighting2 - AC Meiantech Y Y Y Y Y Y Y Y BlindsT7 N Y - - - Y Oregon Y - FA21RF Flamingo Smartwares SF501 Focus Forest blind/curtain motors - http://www.forestgroup.nl/index_nl.html Froggit - F007TH FunkBus (Gira, Jung, Insta, Berker) HAMA EWS1500 Harrison curtain - - Y Y Rubicson Y Y Y Y Y Y Y Curtain Harrison N Y - http://www.hasta.se/ * = receive only in Type2 used to get the remote ID. Y Y Y Y BlindsT0 Y* Y Hasta old blind motors Hideki weather sensors Home Confort lighting Y Y Y Y Y Y BlindsT1 Hideki Y Y Y - - - Y - HomeConfort Y Y Y Y Y Y HE EU Y Y Y Y Y Y Thermostat2 HE105 N Y Y Y Y Y Y Y Y Y AC ARC Y Y Y Y Y Y Y Y Hideki Y - Y Y Y Y Y Y ARC Ikea Koppla Impuls (NL – Action) Y Y Lighting1 HQ COCO20 Lighting3 Lighting1 Impuls Y N N N Y Y Y Y Inovalley SM80 with plant probes - - - Y Y Rubicson Y - Y Y Y Y AC Y Y Y Y Y Y Y Y Y Y ARC BlindsT6 Y N Y Y - Y Y - Lighting2 Kambrook N Y Y Y Y Y* Lighting4 + X10* Y Y - https://www.kimexinternational.com/A-9162-ecran-deprojection-electrique-encastrable-3-00-x-1-69m-format-169.aspx Y Y - Y BlindsT3 Y Y Kingpin KP100 projection screen KlikAanKlikUit (learning mode) Y Y Y Y Lighting4 N Y Y Y Y Y AC Y Y Y Y Y Y ARC Y Y Y Y Y Y LaCrosse Y - Y Lighting5 LeGrand CAD Hideki Y page 12 / 54 Y - - http://www.harrison.nl/home2.htm Hasta new blind motors - http://www.home-confort.net/en HomeEasy EU (learning mode) - http://www.elro.eu/en/products/cat/home-automation/ HomeEasy UK – HE105 - http://www.homeeasy.eu/ HomeEasy UK (learning mode) HomeEasy UK (with address code wheels) Honeywell - TF-ATS34C Housegard Origo smoke detector HQ COCO-20 http://www.inovalley.com/detail.php?item_id=289 Intertechno (learning mode) - http://www.intertechno.at/ Intertechno (with address code wheels) JVS screens - http://www.screen-discount.nl/ Kambrook RF3672 – http://www.bunnings.com.au/kambrook-4-piece-indoorpowerpoint-kit-with-remote-control_p7030054 Special firmware Kerui security * decoded as X10 in Ext2 firmware https://www.aliexpress.com/item/433-MHz-Wireless-DoorWindows-Sensors-for-KERUI-Alarm-System-MagneticDoor-Sensor-Door-Open-reminder/32590916896.html Kimex projection screen - http://www.klikaanklikuit.nl/home/ KlikAanKlikUit (with address code wheels) La Crosse - TX2, TX3, TX3P, TX4, TX7, TX17, WS2300 Legrand CAD radio Lexibook Copyright 2011-2018, RFXCOM Y Y RFXtrx Version 5.48 Y Y - SM883 LightwaveRF - http://www.lightwaverf.co.uk/ Y Y Y Y AD Y Y Y Y Y Y Lighting5 Livolo N Y Y Y Y Y BlindsT0 Y* Y N Y Livolo - http ://www.livolonederland.nl/ - http://www.livolo-France.com/fr/ - http://nl.aliexpress.com/w/wholesale-livolo-touchswitch.html Louvolite one touch motorised blinds * = receive only in Type2 used to get the remote ID. Lucci Air fan – http://www.lucciair.com/ - - Y - Fan LucciAir Luxaflex – - - Y Y RFY N Y Y Y Y Y Lighting1 COCO GDR2 N Y - Y - - X10 Y - Y Y Y Y Hideki Y - - Y Y - Thermostat4 - Y Y Lighting5 MDRemote V106 N Y N Y http://www.luxaflex.se/produkter/luxaflex/rullgardiner/ Maplin http://www.maplin.co.uk/p/remote-controlledmains-socket-set-single-n78ka Marquant 943134 Maverick ET-732/733 BBQ/Smoke temperature MCZ pellet stove MDremote LED dimmer V106 Y - www.ultraleds.co.uk MDremote LED dimmer V107 Y Y Y Y Y Y Lighting5 MDRemote V107 Y Y Y Y Lighting5 MDRemote V108 N Y http://www.meade.com/products/weatherstations/sensors.h tml Y Y Y Y Hideki Y - Media Mount Projector screen Meiantech security Mercury appliance modules Y Y Y Y Y Lighting4 Meiantech N Y Y Y Y Y Y Y Lighting1 Energenie5 N Y Y Y Y Y Mertik Y Y Y Y Y Y Mertik N Y Y Y Y - Y Y Rubicson BlindsT3 Y - Y Y Y Y Y FineOffset Y - Y Y Y Y AC Y Y Y Y Y Y Y Y Y Y Y Y Y Y ARC always on Hideki Y Y Y Y Y - Y Y Y Y Hideki Y - Y Y Y Y BlindsT6 N Y Y Y Y Y XT300 Y - Y Y Y Y AC Y Y Y Y Y Y Oregon Y - - www.ultraleds.co.uk MDremote LED dimmer V108, EKAB-10KRF - http://www.ledstripkoning.nl/accessoires/dimmerswit/draadloze-dimmer-10-knops-rf/ Meade – TS33F-M, TS34C-M - http://mercury.avsl.com/product?range=ME5124 Mertik Maxitrol Fire Place controllers - G6R-H4T1, G6R-H4T5, G6R-H4TD, G6R-H4T16, G6RH4TB, G6R-H4T21-Z22 Mertik Maxitrol Fire Place controller - G6R-H4S Meteoscan W155,W160 Motorlux blinds motor mi.sol WH2 http://www.ebay.com/itm/Transmitter-forWireless-Weather-Station-wireless-temperature-sensor/121664060899 NEXA (learning mode) - http://www.nexa.se/ NEXA (with address code wheels) NEXA KD101/LM101LC smoke detector Nexa NBA-001 temperature sensor NEXUS - I008T Nobily rolladenmotor http://www.nobily.de/rolladenmotor/funkelektronisch/40mm-achtkantwelle/170/nobilyrolladenmotor-pre4?c=5 Opus XT300 /Imagintronix Soil sensor http://www.plantcaretools.com/en/webshop/wirelessmoisture-sensor-en-detail http://www.ebay.co.uk/itm/Wireless-Soil-Moisture-Sensor/251380900939?pt=UK_Home_Garden_Garden_Plants_F ertiliser_CV&hash=item3a8778244b ORNO Oregon Scientific / Huger BBQ and weather sensors - AW129, AW131, BTHGN129, BTHR918, BTHR918N, BTHR968, EW109, PCR800, RGR126, RGR682, RGR918, RGR928, RTGN318, RTGR328N, RTGR328N, RTGR368N, RTGR383, RTHN318, STR918, STR928, ,THGN800, THGN801, THC138, THC238, THC268, THGN122NX, THGN123N, THGN132ES, THGN132N, Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 13 / 54 THGN500, THGR122(N/NX), THGR228(N/NF), THGR238, THGR268, THGR328N, THGR810, THGR918, THGR928, THGRN228NX, THN122N, THN129, THN132N, THR128, THR138, THR288(N/NF), THRN122N, THWR288A, THWR800, UV138, UVN128, UVN800, UVR128, WGR800, WGR918, WTGR800, WTGR800 Oregon Scientific weighting scales Y - Y Y Oregon Y - https://www.redealer.de/multimedia/homeliving/wetterstationen/bewegungssensor-msr939/a-200667/ - - Y - Oregon Y - OTIO EHS5050 OTIO Lighting Outlook Motion Blinds - Y Y Y - Y RSL RSL Y Y Y https://www.spotlightstores.com/curtains-blinds/indoorblinds/roller-blinds/project-outlook-motion-motorised-rollerblind/p/BP80360543 - Y - - BlindsT4 Y Y OWL – CM113 OWL Y Y Y - Oregon Y - Y Y Y Y Oregon Y - - - Y Y Rubicson Y - Y - Y Y Y - Y - Lighting4 Lighting1 Philips SBC Y N Y Y Y Y Y - X10 Y - Y Y - Y Y - Y Y - Y Y Y Y Lighting4 + AC Y Y N N Y Y Y Y Y Y Y Y Y - - - - Y Lighting4 + AC Y Y radio-quotidom-10-ou-20-nm-volet-roulant-ou-storebanne.html (not the Solutio version) Y Y Y Y BlindsT6 N Y RAEX blind motor (YR1326 or YRL2016 controlled) Renkforce RF101 smoke detector Revolt NC5461 Y Y Y Y Y BlindsT4 always on Y Y Y Y - Y - - RSL Y - Y Y Y Y Y Y Y Y X10 X10 Y Y - Y* Y Y* - AD Y* Y Y Y Y Y Y Y Y Lighting5 RGB432W Lighting4 N Y Y Y Y - Y Y Rubicson Y - Y Y Y Y BlindsT6 N Y - http://rollertrol.com/ * = receive only in Type2 used to get the remote ID. Y Y Y Y BlindsT0 Y* Y Rollertrol G-series blind motors Sartano Screenline motors - http://www.screenline.cz/en/ SEAV TXS4 SelectPlus200689101 & SelectPlus200689103 Y Y - Y Y - Y Y - Y Y Y Y BlindsT6 Lighting4 BlindsT13 FAN SEAV TXS4 N Y N N Y Y Y Y - Y Y Y ByronSX Y Y - Y - - Fan SF01 N Y - BWR101, BWR102, GR101 US BWR101, BWR102 in RFXrec Oregon MSR939 - http://www.theowl.com/ - CM119, CM160, CM180, CM180i Pearl NC-7159 http://www.pearl.de/a-NC7159-3041.shtml Phenix Philips SBC SP370 series Prego P-8426 http://www.sunmarket.fi/tuote.asp?TID=11990 Profile Qnect 423000040,423000042 Profiles PAC-326R Belcanto Proluxx projection screen PROmax Proove –TSS320 & TSS330 fridge/freezer thermometer & outdoor sensors 311346,311501 Quigg RC DS5 4001-A DE 3726 Quotidom – http://www.quotidom.com/moteur-tubulaire- - http://www.pearl.de/a-NC5462-5452.shtml RFXSensor RFXMeter RGB LED strip driver dx.com - http://www.dx.com/ order nbr: 130913, (new TRC02 NOT supported) - http://www.dx.com/ order nbr: 67412 * = receive only in Type2 used to get the RGB remote ID. RGB432W LED controller RisingSun RUBiCSON - stektermometer 48659, 48695 -pool sensor p48019 RohrMotor24 RMF blind motors - http://www.rohrmotor24.eu/rohrmotor24 RollerTrol R-series blind motors ByronSX Lighting4 IT FineOffset or Rubicson (Action NL) Siemens SF01 LF959RA50/LF259RB50/LF959RB50 extractor hood Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 14 / 54 Siemens (UK) SilverCrest 91089 SilverCrest 60494, 284705 Silverline Premium - http://www.aluparts.nl Simu / RTS (RFXtrx433E only) – Y Y Y Y Y Y Y Y Y Y Y Y BlindsT6 Y Y Y N Y Y Y Y - - Y Y RFY N Y - http://www.homewizard.nl/smartwares-draadlozeradiatorkraan.html - - Y Y Radiator1 Smartwares N Y Smartwares RM174RF Somfy / RTS - http://www.somfy.co.uk/ - - - Y ARC Y Y - - Y Y RFY N Y Sonoff RF Sunpery blind motors Sunvic TLX1206 Sunvic TLX7506 TechnoLine/Proficell Y Y Y Y Y Y Y Y Y Y Y - Lighting4 BlindsT9 X10 X10 Y N Y Y Y Y Y - http://www.elv.de/output/controller.aspx?cid=74&detail=10 &detail2=27621 - TX95-TH, WS9180-TX104 Y - Y Y Rubicson Y - Y Y Y Y FineOffset Y - Y Y Y Y Hideki Y - - - - Y Oregon Y - - - - Y Hideki Y - - WT260,WT260H,WT440H,WT450,WT450H,WDS500, RG700 Y - - - Hideki Y - Unitec 48110 EIM 826 Ventus WS155 Viking - - Y Y Y Lighting4 + AC Rubicson Y Y Y - Y Y Y Y FineOffset Y - Y Y Y Y - Y Y Y Y - Y Y Y Y Y Y Y Y Y Y - Visonic Visonic Fan SF01 Lighting1 Waveman FineOffset Y Y N N N Y Y Y Y - Y Y Y Y BlindsT6 N Y Y Y Y Y Y Y Y Y Y Y Y - Y Y Y Y Y Y Y Y Y Y X10 X10 X10 X10 X10 X10 Rubicson Y Y Y Y Y Y Y Y Y Y Y Y Y - http://www.simu.com/ Smartwares radiator valve To control Somfy Centralis use RFY2 commands. AD Lighting4 Lighting4 + AC Telldus 313159 and 313160 https://www.lohelectronics.se/hemautomation/433mhz/sens orer-1110/smart-inne-och-utetermometer-med-hygrometer10396 TFA - TS15C, TS34C,external temperature sensor 30.3133, anemometer 30.3149, UV sensor, rain sensor 30.3148, pool sensor 30.3160 TFA - pool sensor 30.3056.10, 30.3216.20 TFA external temperature sensor 30.3208.02 UPM/Esic (very short receiving range) - 02035, 02038, 02811 Visonic CodeSecure Visonic PowerCode Wave Design extractor hood Waveman Westinghouse fan 7226640 WT0122 pool sensor YOODA blind motors - http://www.sukcesgroup.pl X10 Ninja/Robocam X10 PC Remote X10 RTS10 / RFS10 X10 lighting X10 security Xdom Xiron – EN6 Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 Fan page 15 / 54 2.3. undec on This parameter is for internal use by RFXCOM only!!! If new sensor types are released they will most probably not be decoded by the RFXtrx firmware. For this reason we have added the option to enable receive of undecoded messages. This function is only to enable RFXCOM to add this new sensor type in the firmware if possible. If “undec on” is enabled in normal use the application will receive a lot of undecoded messages mostly as a result of RF noise or disturbed RF packets. Important: For normal use “undec on” should be disabled Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 16 / 54 2.4. Sensitivity influenced by enabled protocols The sensitivity of the receiver part is highly influenced by the number of protocols enabled. Lesser protocols enabled will make the receiver more sensitive for the enabled protocols. X10 ARC AC HomeEasy EU Meiantech/Atlantic Oregon ATI Visonic/Keeloq Mertik AD (LWRF) Hideki/UPM La Crosse FS20 ProGuard BlindsT0 BlindsT1/T2/T3 AE (Blyss) Rubicson FineOffset/Viking Lighting4 RSL Byron SX Imagintronix HomeConfort Green = enabled by default Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 17 / 54 HomeConfort Imagintronix/Opus Byron SX RSL/Revolt Lighting4 FineOffset/Viking Rubicson/Alecto AE (Blyss) BlindsT1/T2/T3/T4 BlindsT0 ProGuard FS20 La Crosse Hideki/UPM AD (LWRF) Mertik Visonic/Keeloq ATI Oregon 3.0 / OWL Oregon 2.1 Oregon 1.0 Meiantech/Atlantic HomeEasy EU AC ARC X10 There are a few protocols that will reduce or even eliminate receiving of other protocols if enabled. For example: If the AD (LightwaveRF, Siemens) protocol is enabled it can stop receiving of Meiantech / Atlantic, Oregon 3.0,Visonic and Mertik. All other protocols are disabled if BlindsT0 is enabled. 2.5. RF range reduction The RF signals operating distance is reduced when the signal has to pass through walls. 2.6. Home Automation software For the list of Home Automation software that supports the RFXtrx see the web site www.rfxcom.com 2.7. Dimensions The dimensions of the RFXtrx/RFXrec are: 83.5 x 42 x 15 mm Total height from bottom to antenna top is 122mm The dimensions of the RFXtrx433E are: 83 x 59 x 22 mm Total height from bottom to antenna top is 130mm 2.8. Electrical The RFXtrx is powered by the 5 Volt of the USB interface. Operating current; Receive mode: Transmit mode: 28 mA (0.14Watt) 45 mA The RFXtrx Radiated RF power is 10dBm max. 2.9. Environmental conditions Normal operating: Absolute min-max temperature: 15°C to 35°C -10°C to 55°C Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 18 / 54 3. Install the USB driver The RFXtrx has the FTDI FT232R USB interface chip installed. The USB drivers are available at http://www.ftdichip.com/Drivers/VCP.htm 4. Run RFXflash on Linux under Mono Open a Terminal screen in Linux (Ctrl-Alt-T) Execute once: Install Mono: [sudo] apt-get install mono-runtime Install VisualBasic support under Mono: [sudo] apt-get install libmono-microsoft-visualbasic8.0-cil If the USB device is created as ttyACMx you will need to create a link between /dev/ttyACMx and a serial port /dev/ttySx. This is not necessary if the device is created as /dev/ttyUSBx !! [sudo] ln -sf /dev/ttyACM1 /dev/ttyS3 Note: sudo must be entered without brackets [ ]. sudo is required if not running as super user. Launch the RFXflash.exe program. [sudo] mono RFXflash.exe Note: RFXmngr does not operate under mono! Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 19 / 54 5. RFXmngr test program The RFXmngr program supports decoding of received data and allows you to transmit commands. After the connection the RFXmngr program transmits a Reset and Get Status command so that it will know the RFXtrx type and configuration settings: Transmitter protocols are always enabled but receiver protocols can be disabled. This is very useful because the receiver will become more sensitive when protocols not used are disabled. So select only the protocols to be used, click Set mode and click Save Settings. Note that these settings are lost in Type1 and Type2 firmware after an update and need to be set again. Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 20 / 54 5.1. Receiver The RF protocols to be received can be configured on the Main tab at Set Mode. Click Save Settings to save the selected protocols in non-volatile memory of the RFXtrx. This configuration is now restored every time after a power up. Note that these settings are lost after a firmware update and need to be set again. Note: Protocol enabling is only necessary for receive. Transmit protocols are always enabled. The received RF data is decoded and displayed in the yellow window. Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 21 / 54 5.2. Transmitter The tabs after the Main tab are used to send commands to the transmitter. For example Lighting1 is used to send X10, ARC and some more. Note: Protocol enabling is only necessary for receive. Transmit protocols are always enabled. Select Type to see which protocols are supported on the different tabs. The transmitted commands are displayed in the yellow window including the acknowledge send by the RFXtrx, in the example above “ACK, data correct transmitted“. Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 22 / 54 6. Flash update of the RFXtrx 6.1. Update firmware in the RFXtrx Firmware is flashed in the RFXtrx using this procedure: 1. Depending on the RFXtrx type download the latest RFXtrx315_yy.hex, RFXrec433_yy.hex or RFXtrx433_yy.hex firmware file. 2. Connect the RFXtrx to a Windows system or Linux under MONO 3. Stop any program that is connected to the RFXtrx. 4. Start the RFXflash program (version 4.0.0.0 or higher) 5. Select the USB RFXtrx COM port or TCP/IP port and click the CONNECT button, (the red LED on the RFXtrx should switch on now) 6. Load the correct .hex firmware file for your RFXtrx, 7. Click the WRITE button, 8. Click the Normal Execution mode button. IMPORTANT: 1. Do not interrupt the flash procedure when started. 2. It can happen that the flash procedure ends with a pop-up screen indicating errors. Just disconnect the RFXtrx and start again at step 5 until the flash procedure if finished without errors. If the red LED does not switch on if you click the CONNECT button: 1. Check if you have selected the correct USB COM port. 2. If you have flashed the RFXtrx before and interrupted the flash procedure it is possible that the RFXtrx does not enter the flash state. Contact support@rfxcom.com for help. Note: Receiver Settings are lost in Type1 and Type2 firmware after an update and have to be set again. Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 23 / 54 6.2. • Update firmware in the RFXtrx step by step Click the Connect to Device button. The RFXtrx will automatically switch from normal mode to the bootloader now. • Click the Open HEX file button and load the RFXtrxyyy_xx.hex file Be sure to load the latest firmware file for the RFXtrx. yyy indicates the RFXtrx frequency, so load the RFXtrx433 for an RFXtrx433! xx indicates the firmware version. Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 24 / 54 • Click the Write device button and the RFXtrx is flashed. • Click on the Normal Execution Mode button to set the RFXtrx to running mode. Note: Receiver Settings are lost in Type1 and Type2 firmware after an update and have to be set again. Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 25 / 54 7. RFXtrx433 special device codes 7.1. Remote commands 7.1.1. X10 RF Remote Dec 2 18 34 56 58 64 66 82 96 98 99 100 Hex 02 12 22 38 3A 40 42 52 60 62 63 64 Button 0 8 4 Rewind Info CHAN+ 2 Ent VOL+ 6 Stop Pause 112 113 114 115 116 117 118 119 120 121 123 124 125 70 71 72 73 74 75 76 77 78 79 7B 7C 7D Cursor-left Cursor-right Cursor-up Cursor-down Cursor-up-left Cursor-up-right Cursor-down-right Cursor-down-left left mouse left mouse-End Drag right mouse right mouse-End 130 146 160 162 176 182 184 186 192 194 201 209 210 211 212 213 214 215 216 217 224 226 242 255 82 92 A0 A2 B0 B6 B8 BA C0 C2 C9 D1 D2 D3 D4 D5 D6 D7 D8 D9 E0 E2 F2 FF 1 9 MUTE 5 Play Menu Fast Forward A+B CHAN3 Exit MP3 DVD CD PC / Shift-4 Shift-5 Shift-Ent Shift-Teletext Text Shift-Text VOL7 Teletext Record Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 26 / 54 7.1.2. ATI Remote Wonder Dec 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 Hex 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 20 21 22 23 24 25 26 27 28 29 Button A B power TV DVD ? Guide Drag VOL+ VOLMUTE CHAN+ CHAN1 2 3 4 5 6 7 8 9 txt 0 snapshot ESC C ^ D TV/RADIO < OK >Max/Restore Window E v Copyright 2011-2018, RFXCOM 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 112 113 114 115 116 117 118 119 120 121 124 125 RFXtrx Version 5.48 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 30 31 32 33 34 35 36 37 38 39 3A 70 71 72 73 74 75 76 77 78 79 7C 7D F Rewind Play Fast forward Record Stop Pause TV2 Clock TV VCR RADIO TV Preview Channel list Video Desktop red green yellow blue rename TAB Acquire image edit image Full screen DVD Audio Cursor-left Cursor-right Cursor-up Cursor-down Cursor-up-left Cursor-up-right Cursor-down-right Cursor-down-left Left Mouse Button V-End Right Mouse Button X-End page 28 / 54 7.1.4. Medion Remote Dec 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 Hex 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 20 21 22 23 24 25 26 27 28 29 Button Mute B power TV DVD Photo Music Drag VOLVOL+ MUTE CHAN+ CHAN1 2 3 4 5 6 7 8 9 txt 0 snapshot ESC DVD MENU ^ Setup TV/RADIO < OK > 2 seconds on the original Somfy remote until the Somfy device responds. • Transmit a Program command with the RFXtrx433E. The Somfy RTS device should respond indicating the pair command was successful. The RFXCOM RFY remote is registered in the RFXtrx433E by sending a Program command. Up to 40 RFXCOM RFY remotes can be registered in the RFXtrx433E. Remotes can be erased from the RFXtrx433E using the RFXmngr program. The Somfy RTS device can be controlled by any application as long as the same ID and Unit Code are used. For example if the RTS device is paired using RFXmngr with ID=1 02 03 and Unit Code 1, the RTS device can be controlled with Homeseer using the same ID and unit code. Usage: To control Somfy Centralis modules use the RFY2 = > 2 seconds commands. Somfy Tilt motors can be configured in 2 modes, US or European. To toggle between modes, press the Reset/ Prog button 2 s. Repeat until the LED, according to the desired configuration, lights up. Store by pressing 2 s. To control Venetian Blinds in US mode: - up/down (transmit < 0.5 seconds): open or close - up/down (transmit > 2seconds): change angle To control Venetian Blinds in Europe mode: - up/down (transmit < 0.5 seconds): change angle - up/down (transmit > 2seconds): open or close Somfy RTS motors have a limited number of memory locations for the remotes. Some have a max of 10 remotes. If you try to pair the 11th remote (can be a RFXtrx433E ID-unit) the motor reacts as if the pairing was successful but there is no response on an up/down command. To solve this, reset the motor to remove all remotes. * Somfy RTS are registered trademarks of Somfy System, Inc. Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 40 / 54 10. BlindsT6 To add a RFXtrx433(E) BlindsT6 device to the blinds motor: 1. press the "program" button twice on the original remote ==> 2 beeps 2. transmit the "confirm" command with the RFXtrx433(E) ==> 5 beeps 10.1. Dooya DT52E, DT82TV, DT82TN • • • • • • • Select a random ID different from all zeroes and a unit code 1 to 15 Press the program button on the motor until the LED lights up Transmit a Confirm command The LED on the motor starts blinking Transmit again a Confirm command The LED on the motor blinks 5 times The motor can be controlled now by the RFXtrx433(E) 11. Lucci Air fan Select the ID for switch settings: ID 0 1 2 3 4 5 6 7 8 9 A B C D E F Remote switches 1 2 3 4 0 0 0 0 0 0 0 1 0 0 1 0 0 0 1 1 0 1 0 0 0 1 0 1 0 1 1 0 0 1 1 1 1 0 0 0 1 0 0 1 1 0 1 0 1 0 1 1 1 1 0 0 1 1 0 1 1 1 1 0 1 1 1 1 0 = ON Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 41 / 54 12. Transmit undecoded ARC commands. Plug-in modules or other equipment with a PT2262 can be controlled using Lighting4. There are a lot of brands using the PT2262 and some of them use the same timing (350) as used by the ARC devices but a different protocol definition. Messages will be received as undecoded ARC messages if the protocol definition does not match the definition of the ARC protocol. Remote commands are received as ARC commands with a wrong house and device code and/or command code or as undecoded ARC messages if “undec on” is enabled. Decoding of these remotes is therefore not possible because they overlap the ARC protocol partly. But transmitting these commands is possible using the Lighting4 command. So if we receive this command UNDECODED ARC:18014403: (18 is not used) hex to binary table 0=0 0 0 0 1=0 0 0 1 2=0 0 1 0 3=0 0 1 1 4=0 1 0 0 5=0 1 0 1 6=0 1 1 0 7=0 1 1 1 8=1 0 0 0 9=1 0 0 1 A=1 0 1 0 B=1 0 1 1 C=1 1 0 0 D=1 1 0 1 E=1 1 1 0 F=1 1 1 1 0 1 4 4 0 3 = selection box 0000 0001 0100 0100 0000 0011 Not selected = 0, box selected = 1 And the Lighting4 command contains the same “undec code” 01 44 03: Lighting4 command:09 13 00 04 01 44 03 01 5E 00 pulse timing is 350 = hex 015E Another example: For this command UNDECODED ARC:18014430 set on the Lighting4 tab in RFXmngr selection box 1 to 24 to 0 1 4 4 3 0 = 0000 0001 0100 0100 0011 0000 Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 42 / 54 13. MCZ pellet stove. In the Type2 firmware zip file which is available on the downloads page you will find a special firmware RFXtrxMCZ.hex that enables you to know the ID of the your MCZ remote. Flash the RFXtrxMCZ.hex firmware in your RFXtrx433(E) and start RFXmngr. Transmit a command with the MCZ remote and you will receive the information. The ID in this example is 81 3F 22 Flash now Type2 or Ext firmware in your RFXtrx433(E) and you can control your MCZ stove using the received ID. Important: remove the batteries from the original remote before you start using the RFXtrx433 to control the MCZ stove! Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 43 / 54 14. Lighting4 devices 14.1. Proluxx projection screen Use Lighting4 with a pulse timing of 360 UP STOP DOWN RESET 1110 1110 1110 1110 1101 1101 1101 1101 0101 0101 0101 0101 1001 1001 1001 1001 0101 0101 0101 0101 0010 1000 0100 0001 ED ED ED ED 59 59 59 59 52 58 54 51 14.2. Kingpin (KP100) projection screen Use Lighting4 with a pulse timing of 1040 UP STOP DOWN PROGRAM 1110 1110 1110 1110 0001 0001 0001 0001 0100 0100 0100 0100 0010 0010 0010 0010 0010 0010 0010 0010 0010 0100 1000 0001 E1 E1 E1 E1 42 42 42 42 22 24 28 21 14.3. Mercury remote control mains sockets http://mercury.avsl.com/product?range=ME5124 Use Lighting4 with a pulse timing of 188 1 OFF 1 ON 01000100010101010011 1100 01000100010101010011 0011 2 OFF 2 ON 01000100010101011100 1100 01000100010101011100 0011 3 OFF 3 ON 01000100010101110000 1100 01000100010101110000 0011 4 OFF 4 ON 01000100010111010000 1100 01000100010111010000 0011 5 OFF 5 ON 01000100011101010000 1100 01000100011101010000 0011 14.4. Conrad 034911 sockets http://www.conrad.nl/ce/nl/product/034911/Draadloze-schakelaarset-5-delig Use Lighting4 with a pulse timing of 425 Off = last 2 digits: 00 ON = last 2 digits: 01 Group I II III IV Unit 1 OFF 1 OFF 1 OFF 1 OFF 00 01 01 01 01 00 01 01 01 01 00 01 01 01 01 00 00 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 00 00 00 00 I I I I 1 2 3 4 00 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 00 01 01 01 01 00 01 01 01 01 00 01 01 01 01 00 01 01 01 01 01 01 01 01 01 01 01 01 00 00 00 00 I I 1 OFF 1 ON OFF OFF OFF OFF 00 01 01 01 00 01 01 01 01 01 01 00 00 01 01 01 00 01 01 01 01 01 01 01 Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 44 / 54 14.5. Sonoff All Sonoff 433MHz RF receiver devices can be controlled by the RFXtrx433 and RFXtrx433E using Lighting4 with a pulse timing of 370usec. The 4 button Sonoff Lighting4 remote code: The last digit indicates the button: A 0001 hex 1 B 0010 hex 2 C 0100 hex 4 D 1000 hex 8 The first 5 digits are the ID. Here an example of ID=D216B button=A Packettype = Lighting4 subtype = PT2262 Sequence nbr = 1 Code = D216B1 decimal:13768369 S1- S24 = 1101 0010 0001 0110 1011 0001 Pulse = 370 usec Signal level = 8 -56dBm The Lighting4 commands can be used for example to control the 4 relays in a Sonoff 4CH Pro https://www.banggood.com/SONOFF-4CH-Pro-10A-2200W-2_4Ghz-433MHz-RF-InchingSelfLockingInterlock-Smart-Home-p-1153324.html 14.6. PT2262 and EV1527 oscillator resistors accepted For the PT2262 use a 3M3 oscillator resistor For the EV1527 a 220K, 270K or 390K oscillator resistor can be used. Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 45 / 54 15. FAQ 15.1. Receive has stopped suddenly but transmit works. Most probably a sensor is transmitting constantly. This could be for example an X10 MS13 motion sensor or weather sensor with almost empty battery. Or an outside weather sensor filled with water. Or a remote with a button pressed. Test the RFXtrx with a remote or sensor on another location (> 1km away) using RFXmngr on a Windows system or laptop. 15.2. Can I increase the receive/transmit range of the RFXtrx? First check chapter 2.5 for the best place for the RFXtrx antenna. The switch board is not the best place for the RFXtrx because of all metal objects that will absorb or reflect the RF signals. It is also advised to place the RFXtrx far away from PC’s, routers, Raspberry PI … because of the RF noise those products produce and this will reduce the receive range very much. You can connect another 50ohm 70cm/433MHz antenna with more gain. For example http://www.ebay.com/itm/290979680030 Install this antenna on a metal plate of at least 30 cm for optimum result. 15.3. The RFXtrx USB connection disconnects sometimes. This happens mostly on Raspberry PI with a low quality power supply. Solution is to use a powered USB hub with a good quality power supply. It can also happen if the USB cable is running along a power cable or a power device is switched on that produces a high power spike like a fluorescent tube. Solution is to separate the USB cable from all other cables and/or use a powered USB hub with a good quality power supply. 15.4. I have a 433.92MHz sensor/remote but this device is not received. Besides the frequency the used protocol and modulation type is also important. See chapter 2 for the list of supported devices. 15.5. The wall plug is switched by the remote. The remote is received but the RFXtrx does not switch the module. The remote transmits several protocols. The protocol used by the wall plug is not received by the RFXtrx but some other protocols are received. Solution: For the HomeEasy EU- HE8xx series: reset the module to remove all paired remotes and pair the module with the RFXtrx433E and one of remote codes that is received. For IT modules FA500/PROmax: Pair the RFXtrx433E with the module using an IT device and select a random ID. The received remote code can be used to know if the module is switched by the remote. Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 46 / 54 16. EC Declaration of Conformity EC Declaration of Conformity RFXCOM declares that the product: RFXtrx Brand: RFXCOM Type: RFXtrx433E conforms with the essential requirements and other relevant provisions of the following directives and complies with the following standards applied: R&TTE Directive 99/5/EC EN 300 220-1 V2.4.1 (2012-05) EN 300 220-2 V2.4.1 (2012-05) Low-voltage Directive 2006/95/EC IEC 60950-1 (2005-12) EMC Directive 2004/108/EC Copyright 2011-2018, RFXCOM EN 301 489-1 V1.9.2 (2011-09) EN 301 489-3 V1.4.1 (2002-08) RFXtrx Version 5.48 page 47 / 54 17. Warning: • • RF signals are possible disturbed and it has not been justified for this equipment at uses in circumstances where life-threatening or dangerous situations are possible. RFXCOM HARDWARE AND SOFTWARE IS NOT INTENDED FOR USE IN THE OPERATION OF NUCLEAR FACILITIES, AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL SYSTEMS, LIFE SUPPORT MACHINES OR OTHER EQUIPMENT IN WHICH THE FAILURE OF THE SOFTWARE COULD LEAD TO DEATH, PERSONAL INJURY, OR SEVERE PHYSICAL OR ENVIRONMENTAL DAMAGE. 18. License • • • • • You are allowed to use RFXCOM software, protocols and Written Materials with RFXCOM hardware only. All copyright and other proprietary notices associated with RFXCOM software, protocols and Written Materials shall be visible to all users. You may not sell, distribute, loan, rent, lease, license, sublicense or otherwise assign or transfer RFXCOM software or RFXtrx protocols or Written Materials unless expressly authorized in writing by RFXCOM. You may not use any RFXCOM device, software or protocol as part of an exclusive or patented product without the express prior written permission of RFXCOM. You may not alter, modify, adapt or create derivative works based on any part of RFXCOM software or protocols or Written Materials in any way, including translating, reverse engineering, disassembling or decompiling the software. 19. Copyright notice • • • All RFXCOM hardware, software, protocols and Written Materials are protected by copyright laws, and may not be reproduced, republished, distributed, transmitted, displayed, broadcast or otherwise exploited in any manner without the express prior written permission of RFXCOM. Netherlands Copyright and international treaty provisions protect the SOFTWARE, HARDWARE, RFXtrx protocols and Written Materials and shall be subject to the exclusive jurisdiction of the Netherlands Courts RFXCOM reserves all rights not expressly granted herein. Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 48 / 54 20. Revision history Version 0.0 – August 18, 2011 Initial version. Version 1.0 – October 30, 2011 RFXflash under Mono added. Version 2.0 – December 30, 2011 Updated for the production version with FTDI USB chip Version 2.1 – January 18, 2012 Link for ACM to serial port added in Linux instruction. EC Declaration of Conformity added Version 2.2 – February 8, 2012 Protocols overview added Screen dumps updated Version 2.3 – February 16, 2012 Novatys planned Version 2.4 – February 25, 2012 General information updated Version 2.5 – March 1, 2012 Chapter added how to run RFXmngr or RFXflash on Linux. Version 2.6 – March 14, 2012 Code tables added Cresta, UPM added Version 2.7 – March 15, 2012 Flash procedure updated Version 2.8 – March 31, 2012 Phenix table added Version 2.9 – March 31, 2012 AB400 and Phenix address extended Version 2.10 – April 16, 2012 Linux USB - tty configuration updated Version 2.11 – May 14, 2012 List of supported protocols updated. Version 2.12 – June 8, 2012 Chapter added how to run RFXmngr or RFXflash on Mac OS Version 2.13 – July 15, 2012 List of supported protocols updated Version 2.14 – August 4, 2012 List of enabled protocols influence added RFXtrx315 added Version 2.15 – August 18, 2012 Enabled protocols table changed Version 2.16 – August 26, 2012 Rubicson stektermometer added ATI Remote Wonder II added Version 2.17 – August 28, 2012 Table “sensitivity influenced” updated Version 2.18 – September 18, 2012 Chapter 2.3 updated: BlindsT0 disables all other protocols Version 2.19 – September 25, 2012 RFXFlash version required changed to 4.0.0.0 Version 2.20 – September 28, 2012 RF range reduction guide added Version 2.21 – October 18, 2012 BlindsT2 and BlindsT3 added Version 2.22 – October 24, 2012 Sartano added Version 2.23 – October 31, 2012 Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 49 / 54 Sensitivity table updated Version 2.24 – November 7, 2012 Protocol table extended with the protocols to enable for receive Version 2.25 – November 14, 2012 HE105 switch settings added Version 2.26 – November 28, 2012 undec on explained Version 2.27 – December 4, 2012 Use of Lighting4 commands for undec ARC Brennenstuhl added Version 2.28 – December 18, 2012 Receiver tab removed from RFXmngr Version 2.29 – December 27, 2012 Lighting4 receive added Version 2.30 – January 1, 2013 Raex motor added Version 3.00 – January 4, 2013 RFXtrx433 Type1/Type2 firmware added Version 3.01 – February 4, 2013 Supported protocols list updated Version 4.00 – February 21, 2013 Chapter 8 - Lighting4 screen updated for RFXmngr 11.0.0.0 Known Lighting4 chapter added Version 4.01 – March 13, 2013 Receive of LaCrosse sometimes influenced by enabled Hideki Version 4.02 – June 8, 2013 MDREMOTE LED dimmer added Conrad RSL2 added Energenie added Version 4.03 – September 27, 2013 How to find the MDREMOTE ID (chapter 7.6) WS1200 added Byron SX Chime added Version 4.04 – November 15, 2013 Maverick ET-732 added Alecto SA30 added Oregon EW109 added Revolt added Version 4.05 – December 5, 2013 Blyss command explanation added. Lighting4 - Mercury added Lighting5 – dx.com RGB LED controller added Version 4.06 – December 27, 2013 Chapter 2.2 updated Version 4.07 – February 10, 2014 Chapter 7.8 added: how to find the dx.com RGB LED strip driver ID Version 4.08 – March 20, 2014 ARC and Oregon3.0 updated in table 2.4. Energenie 5-gang 429.950 added Version 4.09 – April 4, 2014 BlindsT6 - DC106, YOODA, Röhrmotor24 RMF added Version 4.10 – April 7, 2014 BlindsT7 - Forest added Version 4.11 – April 28, 2014 RGB LED – clarified AD is LightwaveRF Version 4.12 – May 21, 2014 Kambrook RF3672 added RFY protocol added Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 50 / 54 Somfy programming instructions added Supported protocol list RFXtrx433 updated. Protocol list by function added Version 4.13 – May 31, 2014 Opus TX300/Imagintronix Soil sensor added Version 4.14 – June 18, 2014 Prega sensor added Conrad 34911 Lighting4 coding added Version 4.15 – June 25, 2014 Kambrook, Rubicson, Viking supported in ext firmware Number of RFY remotes increased from 16 to 30 Version 4.16 – June 29, 2014 RFXmngr cannot be used on Linux Version 4.17 – July 3, 2014 CoCo GDR2 added Version 4.18 – July 14, 2014 Opus TX300 link added Version 4.19 – July 25, 2014 Aoke relay added Version 4.20 – August 25, 2014 Enabling protocols clearified. Version 4.21 – September 5, 2014 Meade sensors added Oregon BTHGN129 sensor added Version 4.22 – September 18, 2014 Eurodomest added (NL - Action) Byron MP001 added WT0122 added Procedures added to find the Eurodomest and TRC02 ver2 ID Version 4.23 – September 24, 2014 Proove TSS330 fridge/freezer sensor added Version 4.24 – October 9, 2014 BlindsT0 added in ext firmware Alecto WS1700 and compatibles added Version 4.25 – December 13, 2014 Smartwares radiator valve added Proove TSS320 sensor added Version 4.26 – January 2, 2015 SelectPlus200689101 White Chime (Action NL) added Version 4.27 – January 6, 2015 SelectPlus200689103 Black Chime (Action NL) added Version 4.28 – January 7, 2015 Proove outdoor sensors 311346 & 311501 added Etekcity Wireless Remote Control Outlet Switch (US) Version 5.00 – January 10, 2015 Copyright message updated License chapter added RFXmngr information updated Version 5.01 – February 27, 2015 Chapter 2.5 Lighting4 receive is reduced with HomeEasy EU enabled. Chamberlain tubular motor added Sunpery blind motors added DEA Systems receivers added Envivo ENV-1348 chime added Alecto WS4500 added Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 51 / 54 Version 5.02 – March 18, 2015 1byOne Easy Chime added BTX blind motors added Dolat DLM-1 blind motors added OTIO added Version 5.03 – March 19, 2015 TFA 30.3160 pool sensor added Version 5.04 – April 14, 2015 Chapter 4 updated with restrictions on Lighting4 Siemens SF01 LF959RA50/LF259RB50/LF959RB50 extractor hood added Maplin N78KA added Version 5.05 – May 2, 2015 Dooya blind motors added Louvolite one touch motorised blinds added Alecto WS3500 added Version 5.06 – May 4, 2015 Current dx.com TRC02 LED drivers have a different protocol and are not supported. Version 5.07 – June 1, 2015 WH2 temperature humidity sensor added RGB LED controller http://www.ebay.com/itm/191481664563 (maybe dx.com 227892) Version 5.08 – July 31, 2015 Oregon MSR939 added ESMO blind motors added Brel blind motors added Blinds T6 type motors now also supported in Ext firmware Supported devices table 2.2.2. updated Version 5.09 – Aug 12, 2015 Luxaflex blind motors added Version 5.10 – Aug 17, 2015 JVS screen motors added Livolo NL link added Version 5.11 – Aug 31, 2015 ASA motors added Version 5.12– Sept 14, 2015 Home Confort added Version 5.13– Oct 2, 2015 Oregon GR101 received in Type1 firmware Conrad RSL sensors received in Type2 firmware Version 5.14– Oct 7, 2015 Quotidom blinds motor added Version 5.15– Nov 06, 2015 Banggood temp-hum sensor added Legrand CAD radio added Version 5.16– Nov 26, 2015 Proluxx codes corrected Version 5.17– Dec 24, 2015 RFXflash procedure updated Rubicson pool sensor 48.019 added Inovalley SM80 plant sensor added Lucci Air fan added Version 5.18– Jan 1, 2016 1byone Drive Way alarm added Version 5.19– Feb 6, 2016 Avantek added ASP blinds motors BlindsT11 added Maverick ET-733 added Profiles PAC-326R Belcanto chime added HQ COCO-20 added Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 52 / 54 Version 5.20– Feb 18, 2016 BlindsT12 Confexx CNF24-2435 added IT FA500, PROmax… added Ext2 fimware overview added in chapter 2 Auriol Z31055B-TX added Chuango, Eminent security sensors added Version 5.21– May 6, 2016 Cartelectronic TIC and Encoder added FAQ chapter added Version 5.22– May 14, 2016 Corrected: TX95 is using the Rubicson protocol MDRemote V108 added Version 5.23– June 10, 2016 Motolux blinds motor added Auriol H13726, Hama EWS1500, Meteoscan W155/W160, Ventus WS155 added FAQ updated Version 5.24– June 21, 2016 Seav TXS4 added Version 5.25– Aug 6, 2016 ORNO added Version 5.26– Sept 6, 2016 Added: How to find the SEAV TXS4 ID Version 5.27– Oct 09, 2016 Westinghouse fan 7226640 added THN129 added TFA 30.3056 pool sensor added Version 5.28– Oct 19, 2016 MCZ pellet stove added Alecto SA33 added Smartwares RM174RF smoke detector added Version 5.29– Nov 27, 2016 SilverCrest 91089 added Mertik G6R-H4S added Marquant 943134 MCZ pellet stove instructions added Version 5.30– Dec 6, 2016 Kerui security sensors added Screenline added Version 5.31– Dec 15, 2016 Flamingo smartwares SF501 added Version 5.32– Jan 02, 2017 Kangtai, Cotech added Version 5.33– Feb 01, 2017 Cranenbroek added Unitec 48110 EIM 826 added SilverCrest 60494 added WSD10 added Version 5.34– March 08, 2017 Housegard Origo smoke detector added Pearl NC-7159 added Ambient Weather & Froggit F007TH added TFA 30.3208.02 sensor added Version 5.35– March 20, 2017 Silverline Premium motor added Dooya DT82 instructions added Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 53 / 54 Version 5.36– April 25, 2017 Quigg added OTIO EHS5050 added Blyss temperature/humidity sensor 630467 added Outlook Motion Blinds added Version 5.37– May 5, 2017 Cartelectronic TIC in Type2 and Ext2 Version 5.38– May 22, 2017 BBSB not in Ext2 Profile Qnect added Version 5.39– July 28, 2017 Banggood DANIU sensor added Somfy usage remarks added Brennenstuhl RC2044 added Version 5.40– Sept 18, 2017 Blyss temp/hum added in Ext Cartelectronic Linky added Version 5.41– Sept 24, 2017 Sonoff RF added Rollertrol G series added Version 5.42– Oct 26, 2017 Dooya DC2770, DT52E added Version 5.43– Nov 1, 2017 A-OK AC127,AC129 added Version 5.44– Nov 11, 2017 Digoo DG-R8H added Version 5.45– Nov 23, 2017 SilverCrest 284705 added Version 5.46– March 2, 2018 Nexa NBA-001 added Kimex projection screen added Version 5.47– March 13, 2018 Lighting4 PT2262 EV1527 info added Telldus Thermo/Hygro sensors 313159 and 313160 Version 5.48– March 28, 2018 FunkBus (Gira, Jung, Berker, Insta) added Nobily rolladenmotor added Copyright 2011-2018, RFXCOM RFXtrx Version 5.48 page 54 / 54
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Print, Fill forms, Extract, Print high-res Page Count : 54 Page Layout : SinglePage Page Mode : UseNone XMP Toolkit : Adobe XMP Core 5.1.0-jc003 Producer : PDFCreator 3.1.1.10348; modified using iTextSharp™ 5.5.12 ©2000-2017 iText Group NV (AGPL-version) Keywords : Modify Date : 2018:03:28 13:58:54+02:00 Create Date : 2018:03:28 13:58:52+02:00 Creator Tool : PDFCreator 3.1.1.10348 Metadata Date : 2018:03:28 13:58:54+02:00 Document ID : uuid:e1e306ef-34da-11e8-0000-2f49155ef293 Instance ID : uuid:e1e306ef-34da-11e8-0000-2f49155ef293 Format : application/pdf Title : RFXtrx User Guide Creator : b_wei Description : Author : b_wei Subject :EXIF Metadata provided by EXIF.tools