RX1202FX_TECH_INFO_Rev_B.pmd RX1202FX Tech Specs

User Manual: RX1202FX - Tech Specs

Open the PDF directly: View PDF PDF.
Page Count: 5

v02 2007-06
Technical Specifications
EURORACK PRO RX1202FX
2
EURORACK PRO RX1202FX
RX1202FXRX1202FX
RX1202FXRX1202FX
RX1202FX
EURORACK PRO
Ultra-Low Noise Design 12-Input Mic/Line Rack Mixer with Premium Mic Preamplifiers
and 24-Bit Multi-FX Processor
VUltra-low noise ULN design, highest possible headroom, ultra-transparent audio
V8 new state-of-the-art, studio-grade IMP "Invisible" Mic Preamps with:
- 130 dB dynamic range for 24-bit, 192 kHz sampling rate inputs
- Ultra-wide 60 dB gain range
VIntegrated 24-bit digital stereo FX processor with 100 awesome presets including reverb, chorus, flanger,
delay, pitch shifter and various multi-effects
VEffective, extremely musical 2-band EQ and Clip LED on all channels
V4 balanced high-headroom line inputs
VState-of-the-art 4580 operational amplifiers provide lowest noise and distortion—better than 4560 op amps
V2 aux sends per channel: 1 pre fader for monitoring applications, 1 post fader for internal FX or as external
send
VCD/tape inputs assignable to main mix or control room/phones outputs
VSeparate control room, phones and stereo CD/tape outputs
VBalanced main mix outputs with gold-plated XLR connectors
VSwitchable +48 V phantom power for condenser microphones
VLong-wearing 60 mm logarithmic-taper faders and sealed rotary controls
VInternal switch-mode power supply for maximum flexibility (100 – 240 V~), noise-free audio, superior transient
response plus lowest possible power consumption for energy saving
VHigh-quality components and exceptionally rugged construction ensure long life
VConceived and designed by BEHRINGER Germany
3
EURORACK PRO RX1202FX
BLOCK DIAGRAM
4
EURORACK PRO RX1202FX
SPECIFICATIONS
MONO INPUTS
MIC (IMP Invisible Mic Preamp)
Type XLR, electr. balanced
Mic E.I.N. (20 Hz – 20 kHz)
@ 0 Ω source resistance -132 dB / -134 dB A-weighted
@ 50 Ω source resistance -130 dB / -132 dB A-weighted
@ 150 Ω source resistance -128 dB / -130 dB A-weighted
Frequency response <10 Hz – 200 kHz
Gain range +10 to +60 dB
Max. input level +12 dBu @ +10 dB gain
Impedance approx. 2.6 kΩ balanced
Signal-to-noise ratio -110 dB / -112 dB A-weighted
Distortion (THD+N) 0.003%, A-weighted
LINE IN
Type ¼” TRS connector,
electronically balanced
Impedance approx. 20 kΩ balanced
10 kΩ unbalanced
Gain range -10 dB to +40 dB
Max. input level +22 dBu @ 0 dB gain
STEREO INPUTS
Type ¼” TRS connector,
electronically balanced
Impedance approx. 20 kΩ balanced
10 kΩ unbalanced
Max. input level +22 dBu
INSERT
Type ¼” TRS connector
(Tip=Send, Ring=Return)
AUXILIARY INPUTS
CD/TAPE IN
Type RCA connectors, unbalanced
Impedance approx. 20 kΩ
Max. input level +22 dBu
AUX RETURN
Type ¼” TRS connector, balanced
Impedance approx. 20 kΩ balanced
10 kΩ unbalanced
Max. input level +22 dBu
OUTPUTS
AUX SENDS (FX)
Type ¼” TRS connector, impedance
balanced
Impedance approx. 240 Ω balanced
120 Ω unbalanced
Max. output level +22 dBu
AUX SENDS (MON)
Type ¼” TRS connector, impedance
balanced
Impedance approx. 240 Ω balanced
120 Ω unbalanced
Max. output level +22 dBu
MAIN OUT
Type XLR connectors, balanced
Impedance approx. 240 Ω balanced
120 Ω unbalanced
Max. output level +28 dBu balanced
+22 dBu unbalanced
CTRL OUT
Type ¼” TRS connector, impedance
balanced
Impedance approx. 240 Ω balanced
120 Ω unbalanced
Max. output level +22 dBu
CD/TAPE OUT
Type RCA connectors, unbalanced
Impedance approx. 1 kΩ
Max. output level +22 dBu
PHONES
Type ¼” TRS connector
Max. output level +19 dBu / 150 Ω (316 mW)
EQ
Low 100 Hz / ±15 dB
High 12 kHz / ±15 dB
MAIN MIX SYSTEM DATA1
Noise
Main mix @ -oo,
Channel fader -oo -98 dB / -101 dB A-weighted
Main mix @ 0 dB,
Channel fader -oo -85 dB / -88 dB A-weighted
Main mix @ 0 dB,
Channel fader @ 0 dB -77 dB / -80 dB A-weighted
Fade attenuation2
(Crosstalk attenuation)
Main fader closed 90 dB
Channel fader closed 90 dB
Frequency response
Microphone input to Main Out
<20 Hz – 105 kHz +1 dB / -1 dB
<10 Hz – 170 kHz +3 dB / -3 dB
EFFECTS SECTION
Converter 24-bit Sigma-Delta
Frequency rate 40 kHz
Presets 100
POWER SUPPLY
Power consumption 18 W
Voltage 100 – 240 V~, 50/60 Hz
Fuse 100 – 240 V~: T 1.6 A H 250 V
Mains connection IEC (power) cable
DIMENSIONS/WEIGHT
RX1202FX
Dimensions (H x W x D) approx. 5 1/5” x 19” x 5 9/10”
(133 mm x 482 mm x 150 mm)
Weight (net) approx. 6.4 lbs. (2.9 kg)
Measuring conditions:
1: 20 Hz – 20 kHz; measured at main output.
Channels1 – 8 gain @ unity; EQ flat; all channels on main
mix; channels 1/3/5/7 leftmost, channels 2/4/6/8 rightmost.
Reference = +6 dBu.
2: 1 kHz relative to 0 dBu; 20 Hz – 20 kHz; line input; main
output; gain @ unity.
5
EURORACK PRO RX1202FX
Technical specifications and appearance are subject to change without notice. The information contained herein is correct at the time of printing. All
trademarks (except BEHRINGER, the BEHRINGER logo and JUST LISTEN) mentioned belong to their respective owners and are not affiliated with
BEHRINGER.BEHRINGER accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description,
photograph or statement contained herein. Colors and specifications may vary slightly from product. Products are sold through our authorized dealers
only. Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied
undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER International GmbH.
ALL RIGHTS RESERVED. © 2007 BEHRINGER International GmbH.
BEHRINGER International GmbH,
Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Muenchheide II, Germany.
Tel. +49 2154 9206 0, Fax +49 2154 9206 4903

Navigation menu