Contents References

References References

User Manual: References

Open the PDF directly: View PDF PDF.
Page Count: 3

DownloadContents References
Open PDF In BrowserView PDF
Software Verification
PROGRAM NAME:
REVISION NO.:

SAP2000
6

REFERENCES
AASHTO. 1990. Standard Specifications for Highway Bridges, 14th Edition, as amended
by the Interim Specifications – Bridges – 1990. AASHTO Subcommittee on Bridges and
Structures.
Albasiny, E.L., and D.W. Martin. 1967. Bending and Membrane Equilibrium in Cooling
Towers. Journal of the Engineering Mechanics Division, Proceedings of the American
Society of Civil Engineers, June, 1967. pp 1-17.
ASME. 1972. ANSYS, Program Verification and Qualification Library. ASME pressure
vessel and piping division committee on computer technology.
Bathe, K. J. and E. N. Dvorkin. 1986."A Formulation of General Shell Elements -- The
Use of Mixed Interpolation of Tonsorial Components" . Int. Journal for Numerical
Methods in Engineering, Vol. 22, No. 3. pp. 697-722.
Bathe, K.J. and E.L. Wilson. 1972. Large Eigen Values in Dynamic Analysis. Journal of
the Engineering Mechanics Division. ASCE Vol. 98, No. EM6. Proc. Paper 9433.
December.
Beer, F. P. and Johnston Jr. E. R, 1962. Vector Mechanics for Engineers, Statics and
Dynamics, 5th Edition. McGraw-Hill Book Co. Inc. New York, NY.
Bowles, J.E. 1982. Foundation Analysis and Design. McGraw-Hill Book Company.
Chopra, A.R. 1995. Dynamics of Structures. Prentice Hall Inc.
Clough, R., and J. Penzien. 1975. Dynamics of Structures. McGraw-Hill Book Company.
Cook, R.D. and W.C. Young. 1985. Advanced Mechanics of Materials. Macmillan
Publishing Company.
Crandall, S. H. and Dahl. N. C. 1959. An Introduction to the Mechanics of Solids,
McGraw-Hill Book Co. Inc. New York, NY.
DeSalvo, G.J. and J.A. Swanson. 1977. ANSYS, Engineering Analysis System, Example
Manual. Swanson Analysis Systems, Inc. Elizabeth, Pennsylvania.
Engineering/Analysis Corporation and Computers/Structures International. Static and
Dynamic Analysis of Multistory Frame Structure Using DYNAMIC/EASE2.
Harris, C.M. and C.E. Crede. 1976. Shock and Vibration Handbook. McGraw-Hill Book
Company.
Harris, C.O. 1959. Introduction to Stress Analysis, The Macmillan Co. New York, NY.
Harvey, J.F. 1985. Theory and Design of Pressure Vessels. Von Nostrand, Reinhold.

REFERENCES - 1

Software Verification
PROGRAM NAME:
REVISION NO.:

SAP2000
6

Kreyszig, E. 1983. Advanced Engineering Mathematics. John Wiley & Sons. Inc.
Lin, T.Y. 1959. Design of Prestressed Concrete Structures. John Wiley & Sons. Inc.
Livesly, R.K., and D.B. Chandler. 1956. Stability Functions for Structural Frame Works.
Manchester University Press. United Kingdom.
MacNeal, R.H., and R.C. Harder. 1985. A Proposed Set of Problems to Test Finite
Element Accuracy. Finite Element in Analysis and Design, Vol. 1. pp3-20. North
Holland.
Paz, M. 1985. Structural Dynamics, Theory and Computations. Van Nostrand, Reinhold.
Peterson, F.E. 1981. EASE2, Elastic Analysis for Structural Engineering, Example
Problem Manual. Engineering Analysis Corporation. Berkeley, California.
Peyrot, A.H., and A.M. Goulois. 1979. "Analysis of Cable Structures". Computers and
Structures, Vol. 10. pp. 805-813.
Poulos, H.G. and E.H. Davis. 1974. Elastic Solutions for Soil and Rock Mechanics. John
Wiley & Sons, Inc.
Roark, R.J., and W.C. Young. 1975. Formulas for Stress and Strain, Fifth Edition.
McGraw-Hill Book Company.
Scheller, J. and M.C. Constantinou. 1999. Response History Analysis of Structures with
Seismic Isolation and Energy Dissipation Systems: Verification Examples for Program
SAP2000. Technical Report MCEER-99-0002. University of Buffalo, State University of
New York.
Scordelis, A.C. and K.S. Lo. 1964. Computer Analysis of Cylindrical Shells. Journal of
The American Concrete Association.
Thomson, W. T. 1965. Vibration Theory and Applications. 2nd Printing. Prentice-Hall,
Inc. Englewood Cliffs, NJ.
Tibert, G. 1999. Numerical Analysis of Cable Roof Structures, Licentiate Thesis.
Department of Structural Engineering. Royal Institute of Technology.
Timoshenko. S. 1956. Strength of Materials, Part II, Advanced Theory and Problems. 3rd
Edition. D. Van Nostrand Co., Inc. New York, NY.
Timoshenko, S. and D. H. Young. 1955. Vibration Problems in Engineering. 3rd Edition.
D. Van Nostrand Co., Inc. New York, NY.
Timoshenko, S. and J. M. Gere. 1961. Theory of Elastic Stability. 2nd Edition. McGrawHill Book Company.

REFERENCES - 2

Software Verification
PROGRAM NAME:
REVISION NO.:

SAP2000
6

Timoshenko, S. and J. N. Goodier. 1951. Theory of Elasticity. 2nd Edition. McGraw-Hill
Book Co. Inc. New York, NY.
Timoshenko, S. and S. Woinowsky-Krieger 1959. Theory of Plates and Shells. 2nd
Edition. McGraw-Hill Book Co. Inc. New York, NY.
Tsopelas, P.C., M.C. Constantinou, and A.M. Reinhorn. 1994. 3D-BASIS-ME: Computer
Program for the Nonlinear Analysis of “Seismically Isolated Single and Multiple
Building Structures and Liquid Storage Tanks. Technical Report NCEER-94-0010.
National Center for Earthquake Engineering Research. Buffalo, New York.
Ugural, A.C. 1981. Stresses in Plates and Shells. McGraw-Hill Book Company.
Zienkiewicz, O.C. 1977. The Finite Element Method. McGraw-Hill Book Company.

REFERENCES - 3
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 3
Language                        : en-US
Tagged PDF                      : Yes
Title                           : Contents
Author                          : Steve Pyle
Creator                         : Microsoft® Word 2013
Create Date                     : 2015:10:13 16:41:58-07:00
Modify Date                     : 2015:10:13 16:41:58-07:00
Producer                        : Microsoft® Word 2013
EXIF Metadata provided by EXIF.tools

Navigation menu