SAFE Defining The Work Flow

• Title
• Copyright
• Disclaimer
• Contents
• Chapter 01 Set the Units
• Chapter 02 Start a Model
  • 2.1 Begin a Model Using a Basic Grid System
  • 2.2 Begin a Model Using Templates
  • 2.3 Begin a Post-Tensioned Model Using Templates
  • 2.4 Import a Model from ETABS
  • 2.5 Saving a Model
• Chapter 03 Define Materials
  • 3.1 Modify Existing Materials
  • 3.2 Input New Materials
• Chapter 04 Define Properties
  • 4.1 Input Structural and Support Properties
• Chapter 05 Draw Objects
  • 5.1 Draw Slabs/Areas
  • 5.2 Draw Rectangular Slabs/Areas
  • 5.3 Quick Draw Slabs/Areas
  • 5.4 Quick Draw Areas Around Points
  • 5.5 Draw Design Strips
  • 5.6 Draw Beams/Lines
  • 5.7 Quick Draw Beams/Lines
  • 5.8 Draw Tendons
  • 5.9 Draw Columns
  • 5.10 Draw Walls
  • 5.11 Draw Dimension Lines
  • 5.12 Draw Slab Rebar
• Chapter 06 Select Objects
  • 6.1 Selection by Graphical Methods
  • 6.2 Selection by Features
  • 6.3 Deselect
  • 6.4 Invert Selection
  • 6.5 Get Previous Selection
  • 6.6 Clear Selection
• Chapter 07 Assign Properties to the Model
• Chapter 08 Load the Model
  • 8.1 Define Load Patterns
    • 8.1.1 Self Weight Multiplier
    • 8.1.2 Auto Live Load Patterning
  • 8.2 Assign Loads
  • 8.3 Define Mass Source
• Chapter 09 Define Load Cases
  • 9.1 Review/Create Load Cases
• Chapter 10 View and Edit the Model Geometry
  • 10.1 Changing Views
  • 10.2 Editing Tools
    • 10.2.1 Interactive Database Editing
• Chapter 11 Analysis and Design
  • 11.1 Set the Mesh Options
  • 11.2 Design Process
  • 11.3 Run Analysis and Design
  • 11.4 Locking and Unlocking the Model
• Chapter 12 Reinforcement Detailing
  • 12.1 Detailing Process
  • 12.2 Preferences
  • 12.3 Run Detailing
  • 12.4 Edit Component Views
  • 12.5 Create and Manage Drawing Sheets
• Chapter 13 Display Results
  • 13.1 Graphical Display of Analysis Results
  • 13.2 Graphical Display of Design Results
  • 13.3 Tabular Display of Results
  • 13.4 Detailing Results
• Chapter 14 Out[ut Results and Reports
  • 14.1 Summary Report
  • 14.2 Print Graphics and Tables
  • 14.3 Export Results
  • 14.4 Print and Export Drawings