SCSI Commands Reference Manual Seagate 2014year
User Manual:
Open the PDF directly: View PDF
Page Count: 386 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- SCSI Commands Reference Manual
- 1.0 Definitions, Symbols, Abbreviations, Keywords, And Conventions
- 2.0 General Concepts
- 3.0 Command Reference
- 3.1 CHANGE DEFINITION command
- 3.2 COMPARE command
- 3.3 COPY command
- 3.4 COPY AND VERIFY command
- 3.5 FORMAT UNIT command
- 3.6 INQUIRY command
- 3.7 LOG SELECT command
- 3.8 LOG SENSE command
- 3.9 MODE SELECT(6) command
- 3.10 MODE SELECT (10) command
- 3.11 MODE SENSE(6) command
- 3.12 MODE SENSE(10) command
- 3.13 PERSISTENT RESERVE IN command
- 3.14 PERSISTENT RESERVE OUT command
- 3.15 PRE-FETCH (10) command, PRE-FETCH (16) command
- 3.16 PREVENT ALLOW MEDIUM REMOVAL command
- 3.17 READ (6) command
- 3.18 READ (10) command
- 3.19 READ (12) command
- 3.20 READ (16) command
- 3.21 READ (32) command
- 3.22 READ BUFFER command
- 3.23 READ CAPACITY (10) command
- 3.24 READ CAPACITY (16) command
- 3.25 READ DEFECT DATA (10) command
- 3.26 READ DEFECT DATA (12) command
- 3.27 READ LONG (10) command
- 3.28 READ LONG (16) command
- 3.29 REASSIGN BLOCKS command
- 3.30 RECEIVE DIAGNOSTIC RESULTS command
- 3.31 RELEASE(6) command
- 3.32 RELEASE (10) command
- 3.33 REPORT IDENTIFYING INFORMATION
- 3.34 REPORT LUNS command
- 3.35 REPORT SUPPORTED OPERATION CODES command
- 3.36 REPORT SUPPORTED TASK MANAGEMENT FUNCTIONS commands
- 3.37 REPORT TIMESTAMP command
- 3.38 REQUEST SENSE command
- 3.39 RESERVE(6) command
- 3.40 RESERVE (10) command
- 3.41 REZERO UNIT command
- 3.42 SANITIZE command
- 3.43 SECURITY PROTOCOL IN command
- 3.44 SECURITY PROTOCOL OUT command
- 3.45 SEEK command
- 3.46 SEEK EXTENDED command
- 3.47 SEND DIAGNOSTIC command
- 3.48 SET IDENTIFYING INFORMATION command
- 3.49 SET TIMESTAMP command
- 3.50 START STOP UNIT command
- 3.51 SYNCHRONIZE CACHE (10) command
- 3.52 SYNCHRONIZE CACHE (16) command
- 3.53 TEST UNIT READY command
- 3.54 UNMAP command
- 3.55 VERIFY (10) command
- 3.56 VERIFY (12) command
- 3.57 VERIFY (16) command
- 3.58 VERIFY (32) command
- 3.59 WRITE (6) command
- 3.60 WRITE (10) command
- 3.61 WRITE (12) command
- 3.62 WRITE (16) command
- 3.63 WRITE (32) command
- 3.64 WRITE AND VERIFY (10) command
- 3.65 WRITE AND VERIFY (12) command
- 3.66 WRITE AND VERIFY (16) command
- 3.67 WRITE AND VERIFY (32) command
- 3.68 WRITE BUFFER command
- 3.68.1 WRITE BUFFER command introduction
- 3.68.2 Combined header and data mode (00h)
- 3.68.3 Vendor specific mode (01h)
- 3.68.4 Data mode (02h)
- 3.68.5 Download microcode and activate mode (04h)
- 3.68.6 Download microcode, save, and activate mode (05h)
- 3.68.7 Download microcode with offsets and activate mode (06h)
- 3.68.8 Download microcode with offsets and save mode (07h)
- 3.68.9 Write data to echo buffer mode (0Ah)
- 3.68.10 Download microcode with offsets, select activation events, save, and defer activate mode (0Dh)
- 3.68.11 Download microcode with offsets, save, and defer activate mode (0Eh)
- 3.68.12 Activate deferred microcode mode (0Fh)
- 3.68.13 Enable expander communications protocol and Echo buffer mode (1Ah)
- 3.68.14 Disable expander communications protocol mode (1Bh)
- 3.68.15 Download application log mode (1Ch)
- 3.69 WRITE LONG (10) command
- 3.70 WRITE LONG (16) command
- 3.71 WRITE SAME (10) command
- 3.72 WRITE SAME (16) command
- 3.73 WRITE SAME (32) command
- 4.0 Parameters for all device types
- 4.1 Diagnostic parameters
- 4.1.1 Diagnostic page format and page codes for all device types
- 4.1.2 Supported diagnostic pages (00h)
- 4.1.3 Translate Address input page (40h)
- 4.1.4 Translate Address Output diagnostic page (40h)
- 4.1.5 SCSI Enclosure Services pages (01h - 2Fh)
- 4.1.6 Rebuild Assist Input diagnostic page
- 4.1.7 Rebuild Assist Output diagnostic page
- 4.2 Log parameters
- 4.2.1 Summary of log page codes
- 4.2.2 Log page structure and page codes for all device types
- 4.2.3 Application Client log page (0Fh)
- 4.2.4 Background Scan log page (15h)
- 4.2.5 Cache Statistics page (37h)
- 4.2.6 Error counter log pages (WRITE, READ, and VERIFY, 02h, 03h, and 05h)
- 4.2.7 Factory Log page (3Eh)
- 4.2.8 Informational Exceptions log page (2Fh)
- 4.2.9 Non-Medium Error log page (06h)
- 4.2.10 Power Condition Transitions log page (1Ah)
- 4.2.11 Protocol-Specific Port log page (18h)
- 4.2.12 Self-Test Results log page (10h)
- 4.2.13 Solid State Media log page (11h)
- 4.2.14 Start-Stop Cycle Counter log page (0Eh)
- 4.2.15 Supported Log Pages log page (00h/ 00h)
- 4.2.16 Supported Log Pages and Subpages log page
- 4.2.17 Temperature log page (0Dh)
- 4.3 Mode parameters
- 4.3.1 Mode parameters overview
- 4.3.2 Mode parameter list format
- 4.3.3 Mode parameter header formats
- 4.3.4 Mode parameter block descriptors
- 4.3.5 Mode page and subpage formats and page codes
- 4.3.6 Application Tag mode page (0Ah/ 02h)
- 4.3.7 Background Control mode page (1Ch/ 01h)
- 4.3.8 Caching Mode page (08h)
- 4.3.9 Control mode page (0Ah)
- 4.3.10 Control Extension mode page (0Ah/ 01h)
- 4.3.11 Disconnect-Reconnect mode page (02h)
- 4.3.12 Format Parameters page (03h)
- 4.3.13 Informational Exceptions Control mode page (1Ch)
- 4.3.14 Power Condition mode page (1Ah)
- 4.3.15 Power Consumption Mode page (1Ah/ 01h)
- 4.3.16 Read-Write Error Recovery mode page (01h)
- 4.3.17 Protocol Specific Logical Unit mode page (18h)
- 4.3.18 Protocol Specific Port mode page (19h)
- 4.3.19 Rigid Drive Geometry Parameters page (04h)
- 4.3.20 Seagate Specific Unit Attention parameters page (00h)
- 4.3.21 Verify Error Recovery mode page (07h)
- 4.4 Vital product data parameters
- 4.4.1 Vital product data parameters overview and page codes
- 4.4.2 ASCII Information VPD page (01h - 7Fh)
- 4.4.3 Block Device Characteristics VPD page (B1h)
- 4.4.4 Block Limits VPD page (B0h)
- 4.4.5 Date Code page (C1h)
- 4.4.6 Device Behavior page (C3h)
- 4.4.7 Extended INQUIRY Data VPD page (86h)
- 4.4.8 Firmware Numbers page (C0h)
- 4.4.9 Device Identification VPD page (83h)
- 4.4.10 Jumper Settings page (C2h)
- 4.4.11 Logical Block Provisioning VPD page
- 4.4.12 Mode Page Policy VPD page (87h)
- 4.4.13 Power Conditions Vital Product Data page (8Ah)
- 4.4.14 Power Consumption Vital Product Data page
- 4.4.15 SCSI Ports VPD page
- 4.4.16 Supported Vital Product Data pages (00h)
- 4.4.17 Unit Serial Number page (80h)
- 4.1 Diagnostic parameters