60695 SGS CGR EE Global Burning Flammability Datasheet A4 EN 2013 V3 Web
User Manual: 60695
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
DATASHEET Burning & Flammability Tests Manufacturers of electrical and electronic products and their components must prove that their goods meet relevant safety standard, including burning and flammability. The risk of uncontrolled fires must be avoided in all your products. Failure to do so could result in unexpected costs or worse, harm to customers and irreparable damage to brand reputation. zz Flammability zz Combustibility zz Drops arising from burning From PCBs to complete fire enclosures SGS can test a wide range of burning behaviours against the requirements of the many different safety standards (see table below for more detail). Timely test programmes and analysis of your product’s properties by our experts helps you to gain a competitive advantage and achieve cost savings where possible. Beyond simply testing for compliance, we can help you to fully understand the flammable properties and burning behaviour of the materials you use and introduce preventive measures for fire protection to your designs. Most commonly requested as part of the CE Mark application process, our burning laboratories conduct burn and flammability tests and deliver reports for approvals relating to: Our highly trained technicians and auditors work with you to understand and support your existing compliance programme, or to create a new one tailored to your business needs. SGS laboratories are qualified to perform burning and flammability tests against the broadest range of international standards and electrical and electronics product categories. See below: Burning AND Flammability Tests for components, parts and materials Eg.: textile, fabrics, fleece, plastic, rubber, natural fibre composites, foam international title European title National Title (e.g. Germany) title IEC 60695-2-10 EN 60695-2-10 DIN EN 60695-2-10 VDE 0471-2-10 Fire hazard testing - part 2-10: glowing/hot-wire based test methods - glow-wire apparatus and common test procedure IEC 60695-2-11 EN 60695-2-11 DIN EN 60695-2-11 VDE 0471-2-11 Fire hazard testing - part 2-11: glowing/hot-wire based test methods - glow-wire flammability test method for end-products IEC 60695- 10-2 EN 60695-10-2 DIN EN 60695-10-2 VDE 0471-10-2 Fire hazard testing - part 10-2: abnormal heat - ball pressure test IEC TS 60695-11-3 Fire hazard testing - test flames - 500 W flames - apparatus and confirmational test methods IEC 60695-11-5 EN 60695-11-5 DIN EN 60695-11-5 VDE 0471-11-5 Fire hazard testing - part 11-5: test flames - needle-flame test method - apparatus, confirmatory test arrangement and guidance IEC 60695-11-10 EN 60695-11-10 DIN EN 60695-11-10 Fire hazard testing - part 11-10: test flames - 50 W horizontal and VDE 0471-11-10 vertical flame test methods IEC 60695-11-20 EN 60695-11-20 DIN EN 60695-11-20 Fire hazard testing - part 11-20: test flames - 500 W flame test VDE 0471-11-20 methods IEC 60695-2-12 Fire hazard testing - part 2-12: glowing/hot-wire based test methods - glow-wire flammability index (GWFI) test method for materials IEC 60695-2-13 Fire hazard testing - part 2-13: glowing/hot-wire based test methods - glow-wire ignition temperature (GWIT) test method for materials continues on next page www.sgs.com/ee international title European title National Title (e.g. Germany) title UL 94 Flammability tests of plastic materials for parts in devices and applications UL 1581 Reference standard for electrical wires, cables, and flexible cords. Restrictions: only vertical flame, FT1 and cable flame test. UL 2556 Wire and cable test methods. Only vertical wiring FV-2, VW-1 DIN 75200 Determination of burning behaviour of interior materials in motor vehicles ISO 3795 Road vehicles, and tractors and machinery for agriculture and forestry - determination of burning behaviour of interior materials FMVSS302 Flammability of interior materials (CFR 49 Part 571); ECE 118 Uniform technical prescriptions concerning the burnning behaviour and /or the capability to repul fuel or lubricant of materials used in the construction of certain categories of motor vehicles Telcordia GR-63-Core IEC 60950-1 NEBSTM requirements: physical protection. Restriction: only part 4.2 and 5.2.3 needle flame test. EN 60950-1 DIN EN 60950-1 (VDE 0805-1) Information technology equipment - safety - part 1: general requirements. Annex: Fire protection housing (alternative to V5) Annex: Fire protection housing (alternative to V0, V1) & components Annex: Flaming oil (Tests of openings in fire protection ground) TL 1011 VW, Audi, Seat Technical delivery condition; flammability of plastic materials DBL 5307 Supply specification; flame retardant properties. Interior trim parts; requirements and test specifications. TL 1010 Materials for vehicle interiors; burning behavior, material requirements GMW 3232 Test method for determining the flammability of interior trim materials STD 5031.19 Flammability of interior materials GS 97038 Determination of burning behavior to automotive interior trim materials SAE J 369 Flammability of polymeric interior materials; horizonal test method ISO 3795 Road vehicle, and tractors and machinery for agriculture and foresty Determination of burning behavior to interior materials PSA D45 1333 Materials inside passenger compartment; horizonal flammability MS 300-08 Flammability resistance; interior materials HES D 6003-09 Flammability test methods for automobile; interior materials PTL 8501 Interior / flammability; requirement and testing SES N 3245 Test method for flame-resistant interior materials and criteria for flame resistant property TSM 055G Flammability test methods for interior non-metallic materials TRIAS 45 Test procedure for flame-resistant interoir; materials of motor mehicles GB 8410 Flammability of automotive interior materials CMVSS 302 Flammability of interior materials SASO 449 / GS 98 Motor vehicles flammability of interior materials and their testing methodes For further information please visit: www.sgs.com/electrical-performance or contact us under ee.global@sgs.com.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Instance ID : uuid:a1fdf7ad-4275-1f4c-a275-ed83c7726148 Original Document ID : adobe:docid:indd:3d673ccb-347b-11de-8bf6-80935d142175 Document ID : xmp.id:5BA9A899BF206811822AE0C7A6AE4461 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:5AA9A899BF206811822AE0C7A6AE4461 Derived From Document ID : xmp.did:5AA9A899BF206811822AE0C7A6AE4461 Derived From Original Document ID: adobe:docid:indd:3d673ccb-347b-11de-8bf6-80935d142175 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Macintosh) History Changed : / History When : 2013:09:30 16:13:07-07:00 Create Date : 2013:09:30 16:13:07-07:00 Modify Date : 2013:09:30 16:13:16-07:00 Metadata Date : 2013:09:30 16:13:16-07:00 Creator Tool : Adobe InDesign CS6 (Macintosh) Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Postscript Name : Univers-Light, Univers-CondensedBold Profile Blob : , Page Layout : SinglePage Page Count : 2 Creator : Adobe InDesign CS6 (Macintosh)EXIF Metadata provided by EXIF.tools