EQQM1MST SH19 4480 01 02

User Manual: SH19-4480-01

Open the PDF directly: View PDF .
Page Count: 582

Download
Open PDF In Browser	View PDF

Tivoli Operations Planning and Control

IBM

Messages and Codes
Version 2 Release 3

SH19-4480-02

Tivoli Operations Planning and Control

IBM

Messages and Codes
Version 2 Release 3

SH19-4480-02

Note
Before using this information and the product it supports, be sure to read the general information under “Notices” on page vii.
ISO 9001 Certification
This product was developed using an ISO 9001 certified quality system.
Certification has been awarded by the Italian quality system certification group, CSQ (Certification No. CISQ/CSQ 9150.IBM7).
CSQ is a member of the mutually recognized organization of European assessors, ITQS, which assesses and certifies quality
systems in the field of information technology enterprises.

Third Edition (December 1999)
This is a major revision of, and obsoletes, SH19-4480-01.
This edition applies to Version 2 Release 3 Modification Level 0 of Tivoli Operations Planning and Control, Program Number
5697-OPC, and to all subsequent releases and modifications until otherwise indicated in new editions or technical newsletters. See
the “Summary of Tivoli OPC Version 2 Release 3 Enhancements” on page xiii for the changes made to this manual. Technical
changes or additions to the text to describe the Tivoli Job Scheduling Console Support are indicated by a vertical line to the left of
the change. Make sure you are using the correct edition for the level of the product.
Order publications through your IBM representative or the IBM branch office serving your locality. Publications are not stocked at the
address below.
IBM welcomes your comments. A form for readers' comments appears at the back of this publication. If the form has been
removed, address your comments to:
Tivoli OPC Information Development
Rome Tivoli Laboratory
IBM Italy S.p.A.
Via Sciangai, 53
00144 Rome
Italy
Fax Number (+39) 06 5966 2077
Internet ID: ROMERCF at VNET.IBM.COM
When you send information to IBM, you grant IBM a nonexclusive right to use or distribute the information in any way it believes
appropriate without incurring any obligation to you.
 Copyright International Business Machines Corporation 1991, 1999. All rights reserved.
Note to U.S. Government Users — Documentation related to restricted rights — Use, duplication or disclosure is subject to
restrictions set forth in GSA ADP Schedule Contract with IBM Corp.

Contents
Notices .
Trademarks

vii
viii

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Preface . . . . . . . . . . . .
How This Book Is Organized
Tivoli OPC Publications . . .
Tivoli OPC Online Books .
Online Message Facility .
Books About Related Products

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Summary of Tivoli OPC Version 2 Release 3 Enhancements
Job Scheduling Console . . . . . . . . . . . . . . . . . . . . . . .
Catalog Management — Data Availability . . . . . . . . . . . . .
OS/390 Workload Manager Support . . . . . . . . . . . . . . . .
OS/390 Automatic Restart Manager Support . . . . . . . . . . .
Program Interface (PIF) Enhancements . . . . . . . . . . . . . .
Enhancements for Non-OS/390 Tracker Agents . . . . . . . . .
Usability Enhancements . . . . . . . . . . . . . . . . . . . . . . .
New and Changed Installation Exits . . . . . . . . . . . . . . . .
New and Changed Initialization Statements
. . . . . . . . . . .
Version 2 Release 2 Summary . . . . . . . . . . . . . . . . . . .
Version 2 Release 1 Summary . . . . . . . . . . . . . . . . . . .
Chapter 1. Introduction . . . .
Message Format . . . . . . . . .
Where Messages Are Presented
Data Entry Errors . . . . . . . . .

ix
ix
x
xi
xi
xi

xiii
xiii
xiii
xiii
xiv
xiv
xiv
xv
xv
xvi
xvii
xx

. . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

1
1
1
2

Chapter 2. EQQATnn Messages

. . . . . . . . . . . . . . . . . . . . . . . . . . .

Chapter 3. EQQAnnn Messages

. . . . . . . . . . . . . . . . . . . . . . . . . . .

Chapter 4. EQQCnnn Messages

. . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . .

Chapter 6. EQQDnnn Messages

. . . . . . . . . . . . . . . . . . . . . . . . . .

Chapter 7. EQQEXnn Messages

. . . . . . . . . . . . . . . . . . . . . . . . . .

Chapter 8. EQQEnnn Messages

. . . . . . . . . . . . . . . . . . . . . . . . . .

Chapter 9. EQQFnnn Messages

. . . . . . . . . . . . . . . . . . . . . . . . .

105

. . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Chapter 5. EQQCLnnn Messages

Chapter 10. EQQFLnn Messages

. . . . . . . . . . . . . . . . . . . . . . . .

109

Chapter 11. EQQFVnn Messages

. . . . . . . . . . . . . . . . . . . . . . . .

113

Chapter 12. EQQFxxx Messages

. . . . . . . . . . . . . . . . . . . . . . . .

121

 Copyright IBM Corp. 1991, 1999

iii

Chapter 13. EQQGnnn Messages

. . . . . . . . . . . . . . . . . . . . . . . .

145

Chapter 14. EQQHnnn Messages

. . . . . . . . . . . . . . . . . . . . . . . .

151

Chapter 15. EQQICnn Messages

. . . . . . . . . . . . . . . . . . . . . . . .

161

Chapter 16. EQQJnnn Messages

. . . . . . . . . . . . . . . . . . . . . . . .

171

Chapter 17. EQQKnnn Messages

. . . . . . . . . . . . . . . . . . . . . . . .

195

Chapter 18. EQQLnnn Messages

. . . . . . . . . . . . . . . . . . . . . . . .

201

Chapter 19. EQQMnnn Messages

. . . . . . . . . . . . . . . . . . . . . . . .

211

Chapter 20. EQQNnnn Messages

. . . . . . . . . . . . . . . . . . . . . . . .

261

Chapter 21. EQQOnnn Messages

. . . . . . . . . . . . . . . . . . . . . . . .

279

Chapter 22. EQQPnnn Messages

. . . . . . . . . . . . . . . . . . . . . . . .

281

Chapter 23. EQQQnnn Messages

. . . . . . . . . . . . . . . . . . . . . . . .

287

Chapter 24. EQQRMnn Messages

. . . . . . . . . . . . . . . . . . . . . . . .

295

Chapter 25. EQQRnnn Messages

. . . . . . . . . . . . . . . . . . . . . . . .

301

Chapter 26. EQQSUnn Messages

. . . . . . . . . . . . . . . . . . . . . . . .

311

Chapter 27. EQQSnnn Messages

. . . . . . . . . . . . . . . . . . . . . . . .

315

Chapter 28. EQQTTnn Messages

. . . . . . . . . . . . . . . . . . . . . . . .

319

Chapter 29. EQQTnnn Messages

. . . . . . . . . . . . . . . . . . . . . . . .

325

Chapter 30. EQQUnnn Messages

. . . . . . . . . . . . . . . . . . . . . . . .

331

Chapter 31. EQQVnnn Messages

. . . . . . . . . . . . . . . . . . . . . . . .

333

Chapter 32. EQQWLnn Messages

. . . . . . . . . . . . . . . . . . . . . . . .

341

Chapter 33. EQQWnnn Messages

. . . . . . . . . . . . . . . . . . . . . . . .

345

Chapter 34. EQQXnnn Messages

. . . . . . . . . . . . . . . . . . . . . . . .

379

Chapter 35. EQQYnnn Messages

. . . . . . . . . . . . . . . . . . . . . . . .

439

Chapter 36. EQQZnnn Messages

. . . . . . . . . . . . . . . . . . . . . . . .

461

Chapter 37. EQQnnnn Messages

. . . . . . . . . . . . . . . . . . . . . . . .

495

Chapter 38. Abend Codes

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

537

Chapter 39. Reason Codes

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

539

Tivoli OPC Messages and Codes

Chapter 40. Tivoli OPC Batch Program Codes and Messages
EQQPDLF Batch Program Condition Codes . . . . . . . . . . . .
EQQPURGE Batch Program WTO Messages . . . . . . . . . . .

. . . . . .
. . . . . . .
. . . . . . .

Contents

549
549
550

Tivoli OPC Messages and Codes

Notices
References in this publication to IBM products, programs, or services do not imply
that IBM intends to make these available in all countries in which IBM operates.
Any reference to an IBM product, program, or service is not intended to state or
imply that only IBM’s product, program, or service may be used. Subject to IBM's
valid intellectual property or other legally protectable rights, any functionally
equivalent product, program, or service may be used instead of the IBM product,
program, or service. The evaluation and verification of operation in conjunction with
other products, except those expressly designated by IBM, is the user’s
responsibility.
IBM may have patents or pending patent applications covering subject matter in
this document. The furnishing of this document does not give you any license to
these patents. You can send license inquiries, in writing, to:
IBM Director of Licensing
IBM Corporation
North Castle Drive
Armonk, NY 10504-1785
U.S.A.
Licensees of this program who wish to have information about it for the purpose of
enabling: (i) the exchange of information between independently created programs
and other programs (including this one) and (ii) the mutual use of the information
which has been exchanged, should contact:
IBM Corporation
P.O. Box 12195
3039 Cornwallis
Research Triangle Park, NC 27709-2195
U.S.A.
Such information may be available, subject to appropriate terms and conditions,
including in some cases, payment of a fee.

 Copyright IBM Corp. 1991, 1999

vii

Trademarks
The following terms are trademarks of Tivoli Systems or IBM Corporation in the
United States or other countries or both:
ACF/VTAM
AS/400
DATABASE 2
DFSMShsm
GDDM
IBM
LoadLeveler
MVS/SP
OPC
OS/390
PS/2
RS/6000
System/390
TME
VTAM

AIX
BookManager
DB2
DFSORT
Hiperbatch
IBMLink
MVS/DFP
MVS/XA
Operating System/2
OS/400
RACF
SAA
Systems Application
Architecture
TME 10
Workplace Shell

AIX/6000
CICS
DFSMS/MVS
Extended Services for OS/2
Hiperspace
IMS
MVS/ESA
NetView
OS/2
Personal System/2
RISC System/6000
Sysplex Timer
Tivoli
VM/ESA

In Denmark, Tivoli is a trademark licensed from Kjøbenhavns Sommer
- Tivoli A/S
Microsoft, Windows, Windows NT, and the Windows logo are trademarks or
registered trademarks of Microsoft Corporation.
UNIX is a registered trademark in the United States and other countries licensed
exclusively through X/Open Company Limited.
C-bus is a trademark of Corollary, Inc.
|

Java and all Java-based trademarks or logos are trademarks of Sun Microsystems,
Inc.
PC Direct is a trademark of Ziff Communications Company and is used by IBM
Corporation under license.
ActionMedia, LANDesk, MMX, Pentium, and ProShare are trademarks or registered
trademarks of Intel Corporation in the United States and other countries.
Other company, product, and service names which may be denoted by a double
asterisk (**), may be trademarks or service marks of others.
DEC
Hewlett-Packard
HP-UX
Solaris
SPARC
SPARCstation
Sun
SunOS
VMS

viii

Tivoli OPC Messages and Codes

Digital Equipment Corporation
Hewlett-Packard Corp.
Hewlett-Packard Corp.
Sun Microsystems, Inc.
SPARC International, Inc.
SPARC International, Inc.
Sun Microsystems, Inc.
Sun Microsystems, Inc.
Digital Equipment Corporation

Preface
This book describes messages issued by Tivoli Operations Planning and Control
(Tivoli OPC), program number 5697-OPC. This book documents the messages
issued by these features:

The
The
The
The
The
The
The
The
The
The
The
The

Tivoli OPC controller
Tivoli OPC tracker
Tracker Agent for OS/2 enabler
Tracker Agent for OS/400 enabler
Tracker Agent for AIX enabler
Tracker Agent for HP-UX enabler
Tracker Agent for Sun Solaris enabler
Tracker Agent for SunOS enabler
Tracker Agent for Digital VAX/Alpha enabler
Tracker Agent for Digital OpenVMS enabler
Tracker Agent for Pyramid MIPS ABI
Tracker Agent for System/390 Open Edition

Messages issued by the trackers on the non-MVS platforms are documented in the
Installation and Operation book for the Tracker Agent feature. Messages issued by
the Tivoli OPC Workload Monitor/2 are documented in the Workload Monitor/2
dialogs. Tivoli OPC Workload Monitor/2 User's Guide describes how to get help for
these messages.
This book should be used by operators, system or application programmers, or by
anyone who is responsible for controlling or diagnosing problems in Tivoli OPC.

How This Book Is Organized
This book contains these chapters:
Chapter 1, “Introduction” contains general information that applies to all
product messages.
Chapter 2, “EQQATnn Messages” through Chapter 37, “EQQnnnn
Messages” list the product messages, in alphanumeric order (A–Z, 0–9).
Chapter 38, “Abend Codes” lists the Tivoli OPC abend codes, in numeric
order.
Chapter 39, “Reason Codes” lists the Tivoli OPC reason codes, in numeric
order.
Chapter 40, “Tivoli OPC Batch Program Codes and Messages” lists the
codes and WTO messages generated by Tivoli OPC batch programs.

 Copyright IBM Corp. 1991, 1999

Tivoli OPC Publications
This book is part of an extensive Tivoli OPC library. These books can help you use
Tivoli OPC more effectively:
Task

Publication

Order
number

Evaluating Tivoli OPC

General Fact Sheet

GH19-4370

Evaluating Tracker Agents

Tracker Agent Features Fact Sheet

GH19-4371

Planning Tivoli OPC

Licensed Program Specifications

GH19-4373

Understanding Tivoli OPC

General Information

GH19-4372

Learning Tivoli OPC concepts
and terminology

Getting Started with Tivoli OPC

SH19-4481

Using the Java GUI

Tivoli Job Scheduling Console Guide for OPC Users

GC32-0402

Using the Java GUI

Tivoli Job Scheduling Console Release Notes

GI10-9233

Interpreting messages and
codes

Messages and Codes

SH19-4480

Installing Tivoli OPC

Installation Guide

SH19-4379

Customizing and tuning Tivoli
OPC

Customization and Tuning

SH19-4380

Planning and scheduling the
workload

Planning and Scheduling the Workload

SH19-4376

Controlling and monitoring the
current plan

Controlling and Monitoring the Workload

SH19-4377

Using Workload Monitor/2

Workload Monitor/2 User’s Guide

SH19-4482

Writing application programs

Programming Interfaces

SH19-4378

Quick reference

Quick Reference

GH19-4374

Diagnosing failures

Diagnosis Guide and Reference

LY19-6405

Controlling the AIX, UNIX**,
VMS, OS/390 Open Edition
workload

Tracker Agents for AIX, UNIX, VMS, OS/390 Open Edition
Installation and Operation

SH19-4484

Controlling the OS/2 and NT
workload

Tracker Agents for OS/2 and Windows NT
Installation and Operation

SH19-4483

Controlling the OS/400
workload

Tracker Agent for OS/400
Installation and Operation

SH19-4485

A Master Index, SH19-4375, is published for the Tivoli OPC library.

Maximizing Your OPC Throughput, SG24-2130, contains useful information for
tuning the OPC installation.

Tivoli OPC Messages and Codes

Tivoli OPC Online Books
All the books in the Tivoli OPC library, except the licensed publications, are
available in displayable softcopy form on CD-ROM in the following Softcopy
Collection Kit:
OS/390, SK2T-6700
You can read the softcopy books on CD-ROMs using these IBM licensed programs:
BookManager READ/2 (program number 5601-454)
BookManager READ/DOS (program number 5601-453)
BookManager READ/6000 (program number 5765-086)
All the BookManager programs need a personal computer equipped with a
CD-ROM disk drive (capable of reading disks formatted in the ISO 9660 standard)
and a matching adapter and cable. For additional hardware and software
information, refer to the documentation for the specific BookManager product you
are using.
Updates to books between releases are provided in softcopy only.

Online Message Facility
The Online Message Facility (OMF) is an OS/2 program that provides online
access to information from BookManager softcopy books. It helps you diagnose
problems without interrupting your work. You can retrieve the description of a
message by clicking on a message number in a Communications Manager
emulator window. Additional information about OMF is available on the Messages
and Codes CD-ROM.

Books About Related Products
These books describe IBM products that are related to Tivoli OPC:
Short Title

Publication

Order
Number

DFP Services for ICF

MVS/DFP: Access Method Services for the Integrated
Catalog Facility

SC26-4562

DFSMS/MVS Version 1 Access Method Services for the
Integrated Catalog Facility

SC26-4905

MVS/DFP: Access Method Services for VSAM Catalogs

SC26-4570

DFSMS/MVS Version 1 Access Method Services for VSAM
Catalogs

SC26-4906

MVS/ESA JES2 Version 4 Messages

GC23-0085

MVS/ESA JES2 Version 5 Messages

GC28-1488

MVS/ESA JES3 Version 4 Messages

GC23-0091

MVS/ESA JES3 Version 5 Messages

SC28-1489

MVS System Codes

GC28-1664

MVS SP5 System Codes

GC28-1486

DFP Services for VSAM

JES2 Messages

JES3 Messages

MVS Codes

Preface

|
|

Short Title

Publication

Order
Number

MVS Messages

MVS System Messages, Volume 1 (ABA-ASA)

GC28-1656

MVS System Messages, Volume 2 (ASB-ERB)

GC28-1657

MVS System Messages, Volume 3 (GFSA-IEB)

GC28-1658

MVS System Messages, Volume 4 (IEC-IFD)

GC28-1659

MVS System Messages, Volume 5 (IGD-IZP)

GC28-1660

MVS SP5 System Messages, Volume 1 (ABA-ASA)

GC28-1480

MVS SP5 System Messages, Volume 2 (ASB-ERB)

GC28-1481

MVS SP5 System Messages, Volume 3 (GFSA-IEB)

GC28-1482

MVS SP5 System Messages, Volume 4 (IEC-IFD)

GC28-1483

MVS SP5 System Messages, Volume 5 (IGD-IZP)

GC28-1484

NetView Messages

NetView Version 2 Release 3 Messages

SC31-6138

RACF Messages and Codes

Resource Access Control Facility (RACF) Version 1
Release 9 Messages and Codes

SC38-1014

RODM Programming Guide

NetView Version 2 Release 3 Resource Object Data
Manager Programming Guide

SC31-6130

SMP/E Messages

System Modification Program Extended Messages and
Codes

GC28-1108

TSO/E Messages

TSO/E Version 2 Messages

GC28-1885

VTAM. Messages and Codes

VTAM Version 4 Release 1 for MVS Messages and Codes

SC31-6418

Tivoli GEM Installation and User's
Guide

Tivoli Global Enterprise Manager: Installation and User's
Guide

GC31-8474

Tivoli GEM Application Policy
Manager User's Guide

Tivoli Global Enterprise Manager: Application Policy
Manager User's Guide

GC31-5108

Tivoli GEM Instrumentation Guide

Tivoli Global Enterprise Manager: Instrumentation Guide

GC31-5109

SAP R/3 User's Guide

GC31-5147

Maestro Supplemental
Documentation Set

Unison Maestro Supplemental Documentation Set

SK3T-3566

xii

Tivoli OPC Messages and Codes

Summary of Tivoli OPC Version 2 Release 3 Enhancements

Job Scheduling Console
The new Tivoli Job Scheduling Console (JSC) is a Java-based, client/server
application. The key advantages of the JSC are the ability to perform
administration and operation tasks in a graphical manner and the ability to access
multiple OPC controllers from a single console.
The JSC can:
Display lists of objects already defined to OPC, from the database and from the
current plan, by using flexible filtering criteria
Work with application descriptions including jobs and their dependencies, time
restrictions (input arrival time, deadline, duration), and run cycles
Work with special resource and workstation definitions
Modify occurrences, workstation status, and special resource information from
the current plan.
The JSC retains the OPC security model. Each data access request is validated
by the controller as it is done currently for ISPF users.
The JSC is a real-time interface with OPC and can be used concurrently with the
ISPF interface. It is available for various UNIX platforms, Windows NT, and
Windows 98. The OPC Connector, which is a backend component supporting the
JSC, is available for various UNIX platforms and Windows NT.

Catalog Management — Data Availability
The new Catalog Management – Data Availability feature improves OPC
performance for job restart and job log retrieval functions. Job runtime information,
for example, the sysout datasets, is maintained locally on the tracked system. The
controller retrieves this information only when needed for catalog management
actions, eliminating the network and processing overhead associated with the
transmission of superfluous data. The runtime information at the tracked system is
managed by a new component, the OPC Data Store. Using the OPC Data Store,
OPC Tracker processes are bypassed and are dedicated to the time-critical job
submission and tracking tasks. A new feature is provided to selectively determine
how long job runtime information is kept in the Data Store. This new feature is
especially useful when a joblog archiving product is used concurrently with OPC.

OS/390 Workload Manager Support
OS/390 Workload Manager, when used in goal mode, provides a new, policy-based
management of deadlines for critical jobs. Some CPU-type operations can now be
marked as critical in OPC. When such a critical operation is late, according to the
specified policy, OPC interfaces with Workload Manager to move the associated job
to a higher performance service class. Thus the job receives appropriate additional
system resource to reduce or eliminate the delay. Several policies are available to

 Copyright IBM Corp. 1991, 1999

xiii

decide when a job is late, considering characteristics such as duration, deadline
time, and latest start time.

OS/390 Automatic Restart Manager Support
OS/390 Automatic Restart Manager increases the availability of OPC components.
In the event of program failure, OPC components, for example, the Controller, the
OS/390 Tracker and the Server can now be restarted automatically by the
Automatic Restart Manager.

Program Interface (PIF) Enhancements
The Program Interface (PIF) has been extended to increase the flexibility of OPC,
allowing users to have extended access to OPC data from other application
programs. Tivoli OPC Version 2 Release 3 significantly enhances the ability to
access current plan data from the PIF by providing:
Full support for special resources data
Read access to special resource usage information for operations
The ability to modify the workstation open intervals
The ability to modify the successor information for an operation.
New resource codes have been added to the Program Interface (PIF):
CPOPSRU
Current plan operation segment with information for the operation in relation
to a special resource
CPSUC
Current plan successor segment
CSR
Current plan special resources
CSRCOM
Current plan special resource common segment
IVL Current plan workstation interval segment

Enhancements for Non-OS/390 Tracker Agents
The OPC Tracker Agents for non-OS/390 platforms have been enhanced:
A new version of the OPC Tracker Agent for OpenVMS is available. This new
version runs in the native OpenVMS environment, thus removing the
requirement to install the POSIX shell.
The security features for the UNIX OPC Tracker Agents have been enhanced.
Stricter file permissions are now used for temporary work files.
The installation process of the OPC Tracker Agent for OS/390 UNIX System
Services has been simplified.

xiv

Tivoli OPC Messages and Codes

Usability Enhancements
New features increase the overall usability of the product, thus increasing user
productivity:
OPC can perform variable substitution within inline procedures, thus increasing
the flexibility of the job setup feature. It is possible to customize OPC so that
jobs are submitted also when variables are not defined in the OPC variable
tables. This means that, when variables are substituted outside OPC, duplicate
variable definitions are avoided.
During Catalog Management actions, OPC can delete datasets with an
expiration date.
A new Modify command (JSUACT) has been provided to start or stop the job
submission function. This feature enables automation products, for example,
Tivoli NetView to have control over the OPC job submission activity.
The Mass Update utility has been enhanced with a new sample job This
downloads all the applications belonging to a group in a sequential file for use
as input to the Batch Loader utility, thus easing the management of group
applications from the batch administration.
The sample library now contains the DSECT sections for the Program Interface
(PIF) data areas. This eases the process of writing PIF applications and the
migration of existing PIF applications to new OPC releases.

New and Changed Installation Exits
User exit EQQUX001 has three new parameters:
NEWREC
Number of JCL lines in new JCLAREA
NEWJCL
New JCLAREA
USDREC
Number of JCL lines used in new JCLAREA
User exit EQQUX007 has the new extended status (PEXSTAT) as part of its
parameters set.
The Job Submission exit (installation exit 1) now allows changes to the size of JCL
being processed. This enhancement gives users more flexibility to customize their
operating environment.
The Operation Status Change exit (installation exit 7) has been enhanced to
receive extended status information. This means that full status information is
available within this exit to allow more detailed processing.
The samples set has two new samples: EQQCMX01 and EQQCMX05.

Summary of Tivoli OPC Version 2 Release 3 Enhancements

New and Changed Initialization Statements
Two initialization statements have been added to enhance the JCL variable
substitution:
VARFAIL
If VARFAIL is specified, JCL variable substitution error is bypassed for the
specified types and variables are left unresolved in the submitted JCL.
VARPROC
Specifies whether or not the variables must be resolved also in the inline
procedures.
Three initialization statements have been added to handle the OPC Data Store
options:
FLOPTS
Defines the options for the FL (Fetch Job Log) task. A Controller uses this
statement when OPCOPTS DSTTASK (YES) is specified.
DSTOPTS
Specifies options for the OPC Data Store.
DSTUTIL
Specifies options for the Data Store batch utilities and the clean up subtask.
Parameters have been added to, or changed in, the JOBOPTS statement so as to
handle the new Data Store options:
JOBLOGRETRIEVAL
A new value DELAYEDST has been added to this keyword for specifying that
the job log is to be retrieved by means of the OPC Data Store.
DSTCLASS
A new parameter to define the reserved held class that is to be used by the
OPC Data Store associated with this tracker.
DSTFILTER
A new parameter to specify if the job-completion checker (JCC) requeues to
the reserved Data Store classes only the sysouts belonging to these classes.
Parameters have been added to, or changed in, the OPCOPTS statement so as to
handle the new catalog management functions:
DSTTASK
Specifies whether or not the OPC Data Store is to be used.
JCCTASK
A new DST value has been added to specify if the JCC function is not
needed, but the Data Store is used.
A parameter has been added to the OPCOPTS and the SERVOPTS statements:
ARM
Activates automatic restart (via the Automatic Restart Manager) of a failed
OPC component.
A parameter has been added to the OPCOPTS statement for the Workload
Manager (WLM) support:

xvi

Tivoli OPC Messages and Codes

WLM
Defines the WLM options, that is, the generic profile for a critical job. The
profile contains the WLM service class and policy.

Version 2 Release 2 Summary
Instrumentation for Tivoli Global Enterprise Manager
Tivoli Global Enterprise Manager (GEM) is the industry's first solution for
unifying the management of cross-platform business applications that run
businesses and make them competitive. Tivoli GEM helps you to manage
strategic applications from a unique business systems perspective, focusing
your IT resources on keeping these systems working properly and
productively. Tivoli OPC has been enhanced to support the Job Scheduling
Business System of the Tivoli GEM Systems Management Business System.
From the Tivoli GEM console, which provides a single point of management,
a Tivoli OPC user has complete control of all the Tivoli OPC components,
regardless of the platform on which they run. In more detail, the Tivoli OPC
instrumentation for Tivoli GEM enables you to do the following:
Show all the Tivoli OPC components, including controllers, stand-by
controllers, OS/390 trackers, AS/400 tracker agents, TCP/IP connected
tracker agents.
Show the different links between the above components. This provides,
at a glance, a check on the health of the connections. For example, an
OS/390 tracker might be running but might have no connection to the
controller.
For each component, manage a set of status parameters (monitors)
specific to that component. These monitors might report the status of
some vital OPC controller data sets such as database, current plan, and
long-term plan)
Manage this set of monitors graphically. You can:
– Ask for value of the monitor
– Be notified when the value of the monitor changes
– Associate a severity (such as normal, warning, severe, or critical)
with each monitor value
Start or stop Tivoli OPC trackers without logging them on.
Know at a glance, in a sysplex environment, which is the active controller
and which the stand-by.
Execute commands on Tivoli OPC components, from a single point of
control, regardless of the platform and operating system used for that
component.
SAP R/3 support
Tivoli OPC has been enhanced to exploit the Extended Agent technology of
the Tivoli Workload Scheduler product. This technology enables Tivoli OPC
to interface with a number of third party applications that can perform
scheduling. By using this technology, you can now start and track a SAP
R/3 job from Tivoli OPC. You can also retrieve and display the job log at the
Tivoli OPC controller. This function requires the Tivoli OPC Tracker Agent
for one of the following platforms:
AIX
Summary of Tivoli OPC Version 2 Release 3 Enhancements

xvii

Digital UNIX
Sun Solaris
Windows NT
HP–UX

TCP/IP communication improvements
The TCP/IP communication component that enables the controller to
communicate with the TCP/IP connected tracker agents has been
restructured to use the standard TCP/IP C–Socket interface. This change
enables Tivoli OPC for the latest OS/390 releases and provides for the use
of the standard TCP/IP features, such as the KEEPALIVE option.
Catalog management enhancements
The logic that Tivoli OPC uses when determining which catalog management
actions to perform has been extended to manage the following situations:
Some steps in a job are not executed, but are flushed. The datasets
referred to in those steps are ignored by the catalog management
function.
A dataset referred to with disposition NEW in one step is also referred to
in other steps. Logic to determine the action to perform in these cases
has been added to the Catalog Management function.
Dataset Delete function (EQQDELDS) improvements
The Dataset Delete function has been enhanced to determine the correct
action when a dataset referred to with disposition NEW in one step is also
referred to in other steps. Logic to determine the correct action to perform in
these cases has been added to the Dataset Delete function. The Dataset
Delete function has also been improved to do the following:
Delete datasets for which an expiration date was specified.
Issue diagnostic information when the IDCAMS DELETE command or
the DFHSM ARCHDEL command fails to delete a dataset.
Current plan occurrence limit removal
The maximum number of occurrences in the current plan has been increased
from 32767 to 9999999. This enhancement enables you to manage the
current plan more flexibly when you have large workloads.
Operations in AD limit removal
You can now define up to 255 operations in each Application Description.
This enhancement provides for more flexibility in the definition of the
workload.
AD and OI consistency check
The consistency between the Application Description and the Operator
Instruction OPC databases is now enforced by OPC. For instance, whenever
an operation is deleted the associated operator instructions is also deleted.
Some usability enhancements have also been implemented in the Application
Description dialogs when defining operator instructions. For instance, you
can now also access temporary operator instructions.
JCL editing from Application Description dialogs
You can now customize the Tivoli OPC dialogs so that a library management
application used in the customer's environment to manage the production
jobs can be invoked from the Application Description OPC dialogs, thus
increasing user productivity. New row commands have been added to

xviii

Tivoli OPC Messages and Codes

invoke such an application from the Operation List panel while working with
an Application Description.
OPC Control Language tool
The OPC Control Language (OCL) tool enables you to access and
manipulate Tivoli OPC data by using a REXX-like language. Several
macro-functions are made available that perform, in a single action, what
would require several invocations of the OPC Program Interface functions.
The OCL tool acts as an extension to the REXX language processor.
Therefore, normal REXX statements can be coded together with OCL
statements. This tool runs in a batch TSO session.
Tracker agents
New Tracker Agents are provided to control the workload on:
Digital UNIX
OS/390 Open Edition
SmartBatch coexistence
Tivoli OPC has been extensively tested to make sure that all the features
continue to work correctly when the production workload is under SmartBatch
control.
Other enhancements to functions
EQQZSUBX 16 MB limit removal: because it is no longer necessary to
move the JCL buffer below the 16 MB line before submitting it to JES2 or
JES3, this processing has been removed from Tivoli OPC.
To improve the robustness of Tivoli OPC, the STIMERM macro is now
invoked, wherever the STIMER macro was previously invoked.
Tivoli OPC Job-Submit user exit (EQQUX001) has been improved by
adding two new parameters: WorkstationID and ErrorCode. When
ErrorCode is set, Tivoli OPC will not submit the job.
Tivoli OPC Operation-Status-Change user exit (EQQUX007) has been
improved by adding the procstep name to the JOBAREA parameter.
This enhancement provides for fully automated problem management.
Debugging aids for performance problems: new statistics are now
produced by Tivoli OPC to trace all the activities performed during the
job submission process. These statistics are especially useful when you
tune your systems to maximize job throughput in Tivoli OPC. You can
dynamically activate and deactivate these statistics by means of new
MODIFY commands.
New and changed installation exits
User exit EQQUX001 has two new parameters:
RETCO
WSNAME

The error code
The workstation name of submission process

User Exit EQQUX007 has a new field in the JobArea called procedure step
name.
Changes to commands
The following modify commands have been added:
CPQSTA
EVELIM

Activates or deactivates CP lock statistic messaging
Sets a new value for the EVELIM keyword of the JTOPTS
statement
Summary of Tivoli OPC Version 2 Release 3 Enhancements

xix

EVESTA
GENSTA
HB
JCLDBG
QUELEN
STATIM
STATUS
WSASTA

Activates or deactivates EVENT statistic messaging
Activates or deactivates GS task statistic messaging
Issues a heartbeat message for an OPC controller or for all
trackers connected to that controller
Activates or deactivates the JCL debugging trace
Sets a new value for the QUEUELEN keyword of the JTOPTS
statement
Sets a new value for the STATIM keyword of the JTOPTS
statement
Returns status information about the OPC controller and the
tracker agents connected to it.
Activates or deactivates WSA task statistic messaging

New and changed initialization statements
The following values have been added to the STATMSG keyword of the
JTOPTS statement:
EVELIM
STATIM
WSATASK

Makes customizable the event number criterion for statistic
messaging.
Uses an interval time criterion to issue statistics messaging.
Activates new statistics for WSA task.

The following new values have been added to the SUBFAILACTION keyword
of the JTOPTS statement:
XC, XE and XR
To specify how OPC must handle values returned by the Job
Submission Exit (EQQUX001) for the RETCO parameter.
A new keyword has been added to the BATCHOPT statement:
MAXOCCNUM

Set the maximum number of occurrences in the current
plan for the daily planning function.

A new keyword has been added to the JTOPTS statement:
MAXOCCNUM

Set the maximum number of occurrences in the Current
Plan for the dialog, ETT, Automatic Recovery and PIF
functions.

Changes to programming interfaces
The OPC Programming Interface (PIF) has been extended as follows:
A new subsegment has been added to the Workstation record called the
Workstation Access Method Information (WSAM).
A new keyword, ADOICHK, has been added to the OPTIONS request to
activate the consistency check between Application Description and
Operator Instruction records.

Version 2 Release 1 Summary
Tivoli OPC Version 2 Release 1 became generally available in March 1997. Major
enhancements compared to OPC/ESA Release 3.1 are described in the following
sections.
Tracker agents
New Tracker Agents are provided to control the workload on:
Digital OpenVMS

Tivoli OPC Messages and Codes

Pyramid MIPS ABI
Shared parm library in Sysplex environment
MVS controllers and trackers can share common controller and tracker
initialization statements and started task JCLs, making it easier to install
many OPC subsystems inside an MVS/ESA sysplex environment.
Controller configuration in Sysplex environment
Tivoli OPC support of MVS/ESA sysplex (base and parallel) has been
extended to enable any one of many cloned controllers on different MVS
images to switch from standby to active status. An OPC controller is started
on each member of the XCF group. The first potential controller that
becomes active is the active controller and the others are standby controllers.
If the active controller fails, a standby controller running in another MVS/ESA
image of the sysplex environment takes over automatically as the active
controller.
Single system image
This enhancement allows OPC TSO dialog users and PIF users to be on a
different MVS/ESA image from the OPC controller. Dialog users and PIF
applications can also be on MVS systems outside the sysplex where the
controller runs. Remote communication is based on APPC.
Extended dialog filter
The dialog filter has been extended to allow more specific search arguments
and to define the interpretation of wildcard characters.
Reparsing of NOERROR
New operator commands allow the operator to dynamically update the
NOERROR table using the NOERROR initialization statements defined by
the OPC PARMLIB member, and to read the statements from a member of
the EQQPARM DD concatenated libraries. In addition a new initialization
statement allows the inclusion of NOERROR statements from members of
the EQQPARM DD concatenated libraries.
PIF extension
Program Interface has been greatly extended to support almost all OPC
database record types.
Job tracking log
This enhancement provides to user exit 11 job tracking records on which an
effective disaster recovery procedure can be based. The customer through
exit 11 receives job tracking records, and can send this data to a remote
controller that, in case of failure of the active controller, will take over as
controller.
GMT clock support improvement
The GMTOFFSET keyword in the OPCOPTS statement lets the user define
an offset between the GMT time set in the MVS system and the actual GMT
time. The OPC controller uses the GMT clock to validate an OPC Tracker
Agent trying to connect; this improvement addresses the need of some users
to have the MVS GMT clock independent of the actual GMT time, while
keeping the ability to use Tracker Agents.
Batch command interface tool
A batch command interface tool is supplied to perform most of the actions
supported by the PIF interface by means of a batch command interface.

Summary of Tivoli OPC Version 2 Release 3 Enhancements

xxi

New and changed initialization statements
Initialization statements have been added and changed in Tivoli OPC Version
2. The following sections summarize the differences.
The INCLUDE statement
Added in Tivoli OPC Version 2, the INCLUDE statement lets you
reduce the size of the parameter library member that contains the
OPCOPTS and JTOPTS statements and reduce the associated
maintenance activities.
Table 1. The INCLUDE Statement
Keyword

Short description

NOERROR

Specifies to read NOERROR information
from other members of the EQQPARM
library.

The INIT statement
Added in OPC/ESA Release 3.1, the INIT statement lets you define
run-time options for processing requests from a PIF application. These
settings override the values set by the INTFOPTS statement in
EQQPARM. The statement is defined in a second parameter file that
is identified by the EQQYPARM DD statement in the JCL procedure of
the PIF application. In Tivoli OPC Version 2 the LUNAME keyword
has been added.
Table 2. The INIT Statement
Keyword

Short description

CWBASE

Specifies the origin for the century window
used by the PIF application

HIGHDATE

Specifies the high date presented to the
PIF application in valid-to fields

LUNAME

Specifies a server or controller LU name
for the PIF application

SUBSYS

Identifies the Tivoli OPC subsystem
controller

TRACE

Specifies the level of trace information to
write to the diagnostic file.

Changes to commands
These modify commands have been added:
NEWNOERR
NOERRMEM

Requests that the NOERROR statements be reprocessed.
(member) Requests that the NOERROR information be
read from the specified member.

The MODIFY command has been extended to accept stop and start of the
server started tasks:
F ssname, P=SERV
S ssname, P=SERV

xxii

Tivoli OPC Messages and Codes

Changes to programming interfaces
The Programming Interface is extended as follows:
UPDATE is supported for calendars, periods, workstations, and all
workstations closed.
BROWSE and UPDATE are supported for ETT and special resources.
The LIST request has been extended to support a new keyword,
MATCHTYP, to specify whether generic search arguments (* and % are to
be treated as normal characters.
A new keyword, ADVERS, has been added to the OPTIONS request, to
activate the support of AD versioning.
New and changed installation exits
Table 3 summarizes the changes to installation exits in Tivoli OPC Version
2.
Table 3. Changes to Installation Exits
Exit name

Short description of change

EQQUX001

Tivoli OPC Version 2 now also supports the addressing
modes RMODE(24) and AMODE(31).

EQQUX011

Sample job tracking log write exit.

Messages
Messages have been changed, deleted, and added in Tivoli OPC Version 2.
Refer to Tivoli OPC Messages and Codes for the complete message text and
descriptions. Note that in Version 2 the message text and explanations refer
to the product as OPC/ESA.

Summary of Tivoli OPC Version 2 Release 3 Enhancements

xxiii

xxiv

Tivoli OPC Messages and Codes

Chapter 1. Introduction
This manual explains all the error, warning, and information messages, as well as
the user abend codes and reason codes, that Tivoli OPC issues.
The messages are listed in alphanumeric order by message identifier. To help you
find messages, the range of messages on a particular page is shown at the top of
the page.

Message Format
Tivoli OPC messages have the following formats:

EQQFnnnC Text or

EQQFFnnC Text or

EQQnnnnC Text

where:
EQQ

Means that the message was issued by Tivoli OPC. The
EQQ prefix is used for all Tivoli OPC messages.

F or FF

Identifies the function that issued the message.

nn, nnn, or nnnn

Is the message number

Is the message severity code, with one of these values:

Text

Information message. Processing continues and, in
almost all cases, no action by the user is required.

Warning message. Processing continues and, in most
cases, no action by the user is required.

Error message. Processing terminates, and action by
the user is required.

Is the message text, which can vary in length. The text may
contain message variables that are substituted at run time or
when the message is issued. In this book, message variables
are represented by asterisks (***) or italic text.

Where Messages Are Presented
The messages described in this book can be presented in two ways:
In the “long message” area on an Interactive System Productivity Facility (ISPF)
panel. This message is displayed if you enter HELP after a message is issued
in the “short message” area on the panel. The ISPF long message area is
normally the third line on the ISPF panel. All Tivoli OPC dialog messages that
are presented in this area have mixed-case text.
As one or more records in the Tivoli OPC message-log dataset. The message
log is defined by the EQQMLOG DD statement. The message log is used by
the Tivoli OPC started task and by Tivoli OPC's own batch jobs. Any message
in the message log can also be displayed as a write-to-operator message.

 Copyright IBM Corp. 1991, 1999

Introduction

The format of a Tivoli OPC message printed in the message log dataset is:

mm/dd HH.MM.SS msgnum TEXT

where:

mm/dd

Is the current date, given as a 2-digit month number and a
2-digit day-of-month number. For example, 02/03 means
February 3.

HH.MM.SS

Is the current time-of-day:
HH

Is the hour, starting from midnight, in the range 00–23.

Is the minute of the current hour, in the range 00–59.

Is the second of the current minute, in the range 00–59.

msgnum

Is the message number in the format described in “Message
Format” on page 1.

TEXT

Is the message text in uppercase.

An example of messages in the Tivoli OPC message log follows:

..
.
ð2/21
ð2/21
ð2/21
ð2/21
ð2/21
ð2/21
ð2/21
ð2/21
ð2/21
ð2/21
ð2/21
ð2/21
ð2/21
..
.

ð
16.31.11
16.31.13
16.31.14
16.31.16
16.31.17
16.31.19
16.31.26
16.31.28
16.31.29
16.31.3ð
16.31.31
16.31.32
16.31.33

EQQZðð5I
EQQZðð5I
EQQZðð5I
EQQZðð5I
EQQZð13I
EQQZð15I
EQQZð15I
EQQZð15I
EQQZð15I
EQQZð16I
EQQZð14I
EQQVðð1I
EQQFðð1I

Tivoli OPC SUBTASK EVENT WRITER
IS BEING STARTED
Tivoli OPC SUBTASK VTAM I/O TASK
IS BEING STARTED
Tivoli OPC SUBTASK JOB SUBMIT TASK IS BEING STARTED
Tivoli OPC SUBTASK DATA ROUTER TASK IS BEING STARTED
NOW PROCESSING PARAMETER LIBRARY MEMBER EWOPTS
INIT STATEMENT: EWTROPTS HOLDJOB(NO)
INIT STATEMENT:
STEPEVENTS(ALL)
INIT STATEMENT:
RETCODE(LAST)
INIT STATEMENT:
EWSEQNO(1)
RETURN CODE FOR THIS STATEMENT IS: ðððð
MAXIMUM RETURN CODE FOR PARAMETER MEMBER EWOPTS IS: ððð
NCF APPLICATION STARTED
DATA ROUTER TASK INITIALIZATION IS COMPLETE

Data Entry Errors
A data entry error occurs in the dialog when you enter an invalid value or do not
enter a value for a required field.

System action: The system displays a short message telling you that something is
invalid or missing. If you enter the HELP command or press the Help PF key, the
system displays a longer message telling you what to enter. The cursor appears
on the panel in the field where the error is located, and the system waits for you to
respond.
User response: Type over the incorrect values, or type in the required values that
you omitted. Then press Enter.

Tivoli OPC Messages and Codes

EQQAT00I EQQAT05I

Chapter 2. EQQATnn Messages
EQQAT00I THE APPC TRACKER TASK HAS STARTED
Explanation: The APPC tracker task has started successfully. Tivoli OPC starts this task if the ROUTOPTS
initialization statement defines one or more APPC destinations.
System action: Tivoli OPC normal processing continues.
System programmer response: None.
EQQAT01I THE APPC TRACKER TASK HAS ENDED
Explanation: The APPC tracker task has been requested to stop and is ending normally.
System action: Tivoli OPC normal processing continues.
System programmer response: None.
EQQAT02E THE APPC TRACKER TASK HAS BEEN CONTACTED BY AN UNKNOWN DESTINATION: LU
Explanation: The APPC tracker task has recognized an inbound attach request from a destination that is not defined
in the ROUTOPTS initialization statement.
System action: The APPC tracker task frees all resources allocated to this APPC conversation. The partner
program that is attempting to start the conversation gets a failing return code from the APPC service routine.
System programmer response: If the APPC tracker task should support the destination specified in this message,
update the ROUTOPTS initialization statement and restart the Tivoli OPC subsystem.
EQQAT03E A QUEUE ELEMENT ON THE APPC TRACKER TASK QUEUE IS NOT RECOGNIZED: ELEM
Explanation: An invalid queue element has been found on the APPC tracker task’s work queue.
System action: The incorrect queue element is returned to the APPC tracker task’s free queue without any further
processing.
System programmer response: Save the Tivoli OPC message log dataset containing this message and contact
your IBM representative.
EQQAT04E THE APPC TRACKER TASK RECEIVED INVALID IDENTIFICATION DATA FROM DESTINATION: LU
Explanation: The initial data received from a partner APPC program is not valid.
System action: The APPC tracker task frees all resources allocated to this APPC conversation. The partner
program sending incorrect data gets a failing return code from the APPC service routine.
System programmer response: Verify that the correct partner program has been started on the remote destination
and that the program is at a supported maintenance level. After making corrections, restart the partner program.
EQQAT05I A CONVERSATION WITH AN APPC TRACKER AT DESTINATION LU HAS ENDED.
SEND RECORDS WERE TRANSMITTED, RCV RECORDS WERE RECEIVED
Explanation: A conversation with an APPC tracker is ending normally.
System action: Tivoli OPC normal processing continues.
System programmer response: None.

 Copyright IBM Corp. 1991, 1999

EQQAT06E EQQAT10E

EQQAT06E THE APPC TRACKER TASK RECEIVED UNRECOGNIZED DATA FROM DESTINATION: LU
Explanation: Data received from a partner APPC program is not valid.
System action: The APPC tracker task frees all resources allocated to this APPC conversation. The partner
program sending incorrect data gets a failing return code from the APPC service routine.
System programmer response: Verify that the correct partner program has been started on the remote destination
and that the program is at a supported maintenance level. After making corrections, restart the partner program.
EQQAT07E NO CONVERSATION FOUND FOR OUTBOUND DATA ON THE APPC TRACKER TASK QUEUE:
ELEM
Explanation: A queue element has been found on the APPC tracker task’s work queue which is not addressed to
any currently active APPC conversation.
System action: The queue element is returned to the APPC tracker task’s free queue without any further
processing.
System programmer response: Save the Tivoli OPC message log dataset containing this message and contact
your IBM representative.
EQQAT08E THE APPC TRACKER TASK CANNOT START, TRACKER FEATURE IS NOT INSTALLED
Explanation: The APPC tracker task could not locate a required load module.
System action: The APPC tracker task is terminated.
System programmer response: If the APPC tracker feature is not installed, the ROUTOPTS initialization statement
should not specify the APPC keyword. If the APPC tracker feature is installed, make sure that the Tivoli OPC
subsystem can access corresponding load module libraries. After making the appropriate corrections, restart the Tivoli
OPC subsystem.
EQQAT09E THE APPC TRACKER TASK RECEIVED INVALID IDENTIFICATION DATA FROM DESTINATION: LU.
VALIDATION RETURN CODE IS RC
Explanation: The initial data received from a partner APPC program is not valid.
System action: The APPC tracker task frees all resources allocated to this APPC conversation. The partner
program sending incorrect data gets a failing return code from the APPC service routine.

The difference between the host system GMT value and the tracker system GMT value is greater than
60 minutes. This message is followed by message EQQAT17W, which shows the different GMT
values.

| 8

The identification data is invalid for other causes to be investigated.

System programmer response: Verify that the correct partner program has been started on the remote destination

| and that the program is at a supported maintenance level. If the return code is 4, correct the GMT values involved,
| using the information in message EQQAT17W. After making corrections, restart the partner program.
EQQAT10E SEND TO DESTINATION: LU FAILED WITH RETCODE RC IMMEDIATELY
Explanation: The APPC tracker task received an immediate nonzero return code from the APPC send data service
routine.
System action: The APPC tracker task terminates this APPC conversation and frees all allocated resources.
System programmer response: Verify that the partner program on the remote destination is at a supported
maintenance level. After making corrections, restart the partner program.

Tivoli OPC Messages and Codes

EQQAT11E EQQAT16E

EQQAT11E SEND TO DESTINATION: LU FAILED WITH RETCODE RC ASYNCHRONOUSLY
Explanation: The APPC tracker task received a nonzero return code from the APPC send data service routine.
System action: The APPC tracker task terminates this APPC conversation and frees all allocated resources.
System programmer response: Verify that the partner program on the remote destination is at a supported
maintenance level. After making corrections, restart the partner program.
EQQAT12E RECEIVE AND WAIT FROM DESTINATION: LU FAILED WITH RETCODE RC IMMEDIATELY
Explanation: The APPC tracker task received an immediate nonzero return code from the APPC receive and wait
service routine.
System action: The APPC tracker task terminates this APPC conversation and frees all allocated resources.
System programmer response: Verify that the partner program on the remote destination is at a supported
maintenance level. After making corrections, restart the partner program.
EQQAT13E RECEIVE AND WAIT FROM DESTINATION: LU FAILED WITH RETCODE RC ASYNCHRONOUSLY
Explanation: The APPC tracker task received a nonzero return code from the APPC receive and wait service
routine.
System action: The APPC tracker task terminates this APPC conversation and frees all allocated resources.
System programmer response: Verify that the partner program on the remote destination is at a supported
maintenance level. After making corrections, restart the partner program.
EQQAT14E IDLE CONVERSATION DELAY ERROR FOR DESTINATION: LU
Explanation: The APPC tracker task received send permission from a remote partner program without any data and
without the minimum delay required for an idle conversation.
System action: The APPC tracker task terminates this APPC conversation and frees all allocated resources.
System programmer response: Verify that the partner program on the remote destination is at a supported
maintenance level. After making corrections, restart the partner program.
EQQAT15E PREPARE TO RECEIVE FROM DESTINATION: LU FAILED WITH RETCODE RC IMMEDIATELY
Explanation: The APPC tracker task received an immediate nonzero return code from the APPC prepare to receive
service routine.
System action: The APPC tracker task terminates this APPC conversation and frees all allocated resources.
System programmer response: Verify that the partner program on the remote destination is at a supported
maintenance level. After making corrections, restart the partner program.
EQQAT16E PREPARE TO RECEIVE FROM DESTINATION: LU FAILED WITH RETCODE RC
ASYNCHRONOUSLY
Explanation: The APPC tracker task received a nonzero return code from the APPC prepare to receive service
routine.
System action: The APPC tracker task terminates this APPC conversation and frees all allocated resources.
System programmer response: Verify that the partner program on the remote destination is at a supported
maintenance level. After making corrections, restart the partner program.

Chapter 2. EQQATnn Messages

EQQAT17W EQQAT25E

| EQQAT17W THE APPC TRACKER TASK DETECTED AN INVALID DIFFERENCE BETWEEN THE CONTROLLER
|
GMT TIME HOSTGMT AND THE TRACKER GMT TIME TRKGMT
| Explanation: This message follows EQQAT09E. It shows the host system GMT value and the tracker system GMT
| value. The host system GMT value may have been adjusted by the value provided in the GMTOFFSET parameter of
| the OPCOPTS statement.
| System action: None.
| System programmer response: Use the GMT values displayed to determine which system has an incorrect
| definition, reset the GMT value where necessary. After making corrections, restart the partner program.
EQQAT21E WRONG NUMBER OF PERIODS IN THE ADDR VALUE, VALUE
Explanation: The ADDR keyword of the APPCROUT initialization statement must specify a value containing one
period.
System action: Processing of the current APPCROUT statement terminates with a nonzero return code. This
causes Tivoli OPC initialization to fail.
System programmer response: Either remove or correct the APPCROUT statement and restart the Tivoli OPC
subsystem.
EQQAT22E THE PERIOD IN THE ADDR VALUE, VALUE, IS INCORRECTLY PLACED
Explanation: The ADDR keyword of the APPCROUT initialization statement must specify a value containing one
period, and that period cannot be placed more than eight characters after the beginning of the value or more than
eight characters before the end of the value.
System action: Processing of the current APPCROUT statement terminates with a nonzero return code. This
causes Tivoli OPC initialization to fail.
System programmer response: Either remove or correct the APPCROUT statement and restart the Tivoli OPC
subsystem.
EQQAT23E THE VALUE OF THE ADDR KEYWORD IS MISSING OR TOO SHORT
Explanation: The ADDR keyword of the APPCROUT initialization statement must specify a value that is not less
than three characters long.
System action: Processing of the current APPCROUT statement terminates with a nonzero return code. This
causes Tivoli OPC initialization to fail.
System programmer response: Either remove or correct the APPCROUT statement and restart the Tivoli OPC
subsystem.
EQQAT24E THE ADDR KEYWORD IS MISSING
Explanation: The current APPCROUT initialization statement does not contain an ADDR keyword.
System action: Processing of the current APPCROUT statement terminates with a nonzero return code. This
causes Tivoli OPC initialization to fail.
System programmer response: Either remove or correct the APPCROUT statement and restart the Tivoli OPC
subsystem.
EQQAT25E THE WORKSTATIONS KEYWORD IS MISSING
Explanation: The current APPCROUT initialization statement does not contain a WORKSTATIONS keyword.
System action: Processing of the current APPCROUT statement terminates with a nonzero return code. This
causes Tivoli OPC initialization to fail.
System programmer response: Either remove or correct the APPCROUT statement and restart the Tivoli OPC
subsystem.

Tivoli OPC Messages and Codes

EQQAT26E EQQAT33E

EQQAT26E WORKSTATION WSN HAS BEEN SPECIFIED MORE THAN ONCE IN A WORKSTATIONS
KEYWORD. THIS IS NOT SUPPORTED
Explanation: The WORKSTATIONS keyword in current APPCROUT initialization statement contains a workstation
name that has already been specified in a WORKSTATIONS keyword. This is a duplicate definition that is not
supported.
System action: Processing of the current APPCROUT statement terminates with a nonzero return code. This
causes Tivoli OPC initialization to fail.
System programmer response: Either remove or correct the APPCROUT statement and restart the Tivoli OPC
subsystem.
EQQAT30E APPC KEYWORD VALUE, VAL1, IS TOO LONG (OR MISSING)
Explanation: A workstation destination name specified as a value of the APPC keyword of the ROUTOPTS
statement is incorrect. The destination name is required and must be not greater than eight characters.
System action: Processing of the APPC keyword continues. Message EQQAT34E is issued when all destinations
have been processed.
System programmer response: Either remove or correct the invalid destination and restart the Tivoli OPC
subsystem.
EQQAT31E APPC KEYWORD VALUE, VAL2, MUST CONTAIN EXACTLY ONE PERIOD
Explanation: A network address specified as a value of the APPC keyword of the ROUTOPTS statement is
incorrect. The network address is required and must be specified as netid.netlu where the netid and netlu names
cannot contain periods.
System action: Processing of the APPC keyword continues. Message EQQAT34E is issued when all destinations
have been processed.
System programmer response: Either remove or correct the invalid destination and restart the Tivoli OPC
subsystem.
EQQAT32E THE PERIOD IN THE APPC KEYWORD VALUE, VAL2, IS INCORRECTLY PLACED
Explanation: A network address specified as a value of the APPC keyword of the ROUTOPTS statement is
incorrect. The network address is required and must be specified as netid.netlu where the netid and netlu names
cannot be greater than eight characters.
System action: Processing of the APPC keyword continues. Message EQQAT34E is issued when all destinations
have been processed.
System programmer response: Either remove or correct the invalid destination and restart the Tivoli OPC
subsystem.
EQQAT33E APPC KEYWORD VALUE, VAL2, IS MISSING OR TOO SHORT
Explanation: A network address specified as a value of the APPC keyword of the ROUTOPTS statement is
incorrect. The network address is required and must be specified as netid.netlu where both netid and netlu are
required.
System action: Processing of the APPC keyword continues. Message EQQAT34E is issued when all destinations
have been processed.
System programmer response: Either remove or correct the invalid destination and restart the Tivoli OPC
subsystem.

Chapter 2. EQQATnn Messages

EQQAT34E EQQAT34E

EQQAT34E AT LEAST ONE APPC DESTINATION IS INCORRECTLY DEFINED
Explanation: The APPC keyword of the ROUTOPTS statement contains one or more incorrectly defined APPC
destinations.
System action: Processing of the current ROUTOPTS statement terminates with a nonzero return code. This
causes Tivoli OPC initialization to fail.
System programmer response: Review earlier error messages to determine the incorrectly defined destination.
Either remove or correct the invalid destination and restart the Tivoli OPC subsystem.

Tivoli OPC Messages and Codes

EQQA000E EQQA009I

Chapter 3. EQQAnnn Messages
EQQA000E YOU ARE NOT AUTHORIZED TO ACCESS THE AD DATABASE
Explanation: You have attempted to access the application description (AD) database, but you are not authorized to
access it. Or, you do not have access authority to a minimum of one of the following Tivoli OPC resources that are
used together with the AD database: the calendar database, the workstation description database, or in some cases,
the long-term plan dataset.
System action: The request is rejected.
User response: If you require access, contact your security administrator.

| EQQA002E THIS VERSION OF THE APPLICATION ALREADY EXISTS
| Explanation: The application already exists with the valid-from date that you specified.
| System action: The system waits for you to respond.
| User response: Specify another valid-from date.
EQQA003E SELECTED PREDECESSOR IS NOT EXTERNAL
Explanation: The predecessor you selected is not external. When defining an external dependency, you must
specify the application ID of the external predecessor before selecting to describe it.
System action: The system waits for you to respond.
User response: Specify the application ID of the external predecessor.
EQQA004E NO MATCHING APPLICATION DESCRIPTION(S) FOUND
Explanation: No application description matched the generic or nongeneric search criteria you specified to generate
a list of applications.
System action: The system waits for you to respond.
User response: Retry using new selection criteria.
EQQA005E NO MATCHING APPLICATION DESCRIPTION FOUND
Explanation: You selected an application that does not have a matching application description. In a list of
applications, in either the browse or list function, the application you selected was not found. The application may
have been deleted or modified after the list of application entries was generated.
System action: The request is rejected.
User response: Return to the application selection criteria panel and press ENTER to generate a fresh list of
applications.
EQQA006I NO RUNCYCLES FOUND FOR THIS APPLICATION
Explanation: You have attempted to display the run cycles of an application for which no run cycles have been
specified.
System action: The request is rejected.
User response: None.
EQQA009I NO PREDECESSORS FOUND FOR THIS OPERATION
Explanation: You have attempted to display the predecessors of an operation for which no predecessors have been
specified.
System action: The request is rejected.
User response: None.
 Copyright IBM Corp. 1991, 1999

EQQA010E EQQA017E

EQQA010E INVALID PARAMETER INPUT TO MODULE MOD
Explanation: This message indicates a programming error.
System action: The system waits for you to respond.
User response: Contact your system programmer.
System programmer response: Contact your IBM representative.
EQQA011I THE APPLICATION IS CREATED
Explanation: The application has been created and saved in the application description database.
System action: None.
User response: None.
EQQA012I THE SELECTED APPLICATION IS MODIFIED
Explanation: The selected application has been modified and saved in the application description database.
System action: None.
User response: None.
EQQA013I THE SELECTED APPLICATION IS COPIED
Explanation: The selected application has been copied and the copy has been saved in the application description
database.
System action: None.
User response: None.
EQQA014I THE SELECTED APPLICATION IS DELETED
Explanation: The selected application has been deleted from the application description database.
System action: None.
User response: None.
EQQA015E THE NUMBER OF INTERNAL PREDECESSORS IS TOO LARGE
Explanation: You specified too many internal predecessors.
System action: The system waits for you to respond.
User response: Delete one or more internal predecessors.
EQQA016E THE NUMBER OF EXTERNAL PREDECESSORS IS TOO LARGE
Explanation: You specified too many external predecessors.
System action: The system waits for you to respond.
User response: Delete one or more external predecessors.
EQQA017E THE NUMBER OF SPECIAL RESOURCES IS TOO LARGE
Explanation: You specified too many special resources.
System action: The system waits for you to respond.
User response: Delete one or more special resources.

Tivoli OPC Messages and Codes

EQQA018E EQQA103E

EQQA018E OP OP HAS AN EXTERNAL PRED WS EWS, WHICH IS NOT FOUND
Explanation: Operation OP has an external predecessor workstation (EWS) that does not exist in the workstation
description database.
System action: The system waits for you to respond.
User response: Enter correct data.
EQQA021I NO SPECIAL RESOURCES FOUND FOR THIS OPERATION
Explanation: You have attempted to display the special resources of an operation for which no special resources
have been defined.
System action: None.
User response: None.
EQQA022E THE APPLICATION STATUS SPECIFIED IS NOT VALID
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Valid application statuses you can specify as selection criteria are: A for active, P for pending, or blank for both active
and pending.
EQQA023E PRIORITY MUST BE A NUMBER FROM 1 - 9
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA024E STATUS MUST BE OCHCACT OR OCHCPEND
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA025E INPUT DATA IN FIELD IS REQUIRED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA101E THE VARIABLE TABLE NAME CONTAINS AN INVALID CHARACTER
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The name of a variable table contains 1 to 16 alphanumeric characters, where the first character is alphabetic.
EQQA102E AN APPLICATION WITH THIS ID ALREADY EXISTS
Explanation: You have attempted to create an application, but the application ID that you specified already exists in
the application description database.
System action: The system waits for you to respond.
User response: Enter a unique application ID. If you want to create versions of an already existing application, you
should use the copy function.
EQQA103E THE APPLICATION IS BEING UPDATED BY ANOTHER USER
Explanation: Another user is currently updating the application you want to update.
System action: The system waits for you to respond.
User response: Try to update the application later.

Chapter 3. EQQAnnn Messages

EQQA104E EQQA110E

EQQA104E THE PERIOD NAME DOES NOT EXIST IN THE CALENDAR
Explanation: The period name that you specified is not defined in the calendar database.
System action: The system waits for you to respond.
User response: Enter an existing period name, or use the Calendar dialog to define the period name.
EQQA105E YOU ARE NOT AUTHORIZED TO READ THE JCL VARIABLE TABLE DATA BASE
Explanation: You have attempted to refer to a JCL variable table. To do this, you need read authority to the JCL
variable table database.
System action: The system waits for you to respond.
User response: If you need to refer to JCL variable table names, contact your security administrator.
EQQA106E DEADLINE PRECEDES INPUT ARRIVAL TIME
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The deadline must be later than the input arrival time.
EQQA107E WORK STATION DOES NOT EXIST IN WS DESCRIPTION DATA BASE
Explanation: The workstation name that you specified is not defined in the workstation description database.
System action: The system waits for you to respond.
User response: Enter an existing workstation name or use the Work Station Description dialog to define the
workstation name.
EQQA108W WHEN UPDATING WS NAME, OPR, EXT AND INT ITEMS MUST ALL BE SELECTED
Explanation: To obtain a correct result, you must select all of:
OPR
INT
EXT

Workstation name
Predecessor ws name
Predecessor ws name

This does not prevent you from updating only one of the items.
System action: The system waits for you to continue.
User response: Select all three items.
EQQA109E YOU HAVE ENTERED AN INVALID VALUE IN THE CATALOG MANAGEMENT FIELD.
Explanation: The only valid values in this field are Y (Yes), N (No), and D (Deferred).
System action: The system waits for you to respond.
User response: Enter a valid value.
EQQA110E JOBNAME REQUIRED FOR JOB SETUP, PRINT, OR COMPUTER WS
Explanation: Data entry error; see “Data Entry Errors” on page 2.
A job name is required for an operation at a job setup, print, or computer workstation.

Tivoli OPC Messages and Codes

EQQA111E EQQA122I

| EQQA111E YOU HAVE ENTERED AN INVALID VALUE IN THE ONE OF THE WLM FIELDS
| Explanation: In the WLM CRITICAL field, the only valid values are Y (Yes) and N (No). In the WLM POLICY field,
| the only valid values are:
| L

Long Duration. The job is assisted if it runs beyond its estimated duration.

| D

Deadline. The job is assisted if it has not finished when its deadline time is reached.

| S

Latest Start Time. The job is assisted if it is submitted after its latest start time.

| C

Conditional. An algorithm calculates whether to apply the Deadline policy or the Latest Start Time policy.

| ''

OPC WLM will eventually use the policy specified in OPCOPTS.

| User response: Enter valid values in the WLM CRITICAL and POLICY fields.
EQQA116E DURATION TIME IS NOT SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA117E 24.00 IS NOT ALLOWED AS INPUT ARRIVAL TIME
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Valid input arrival times are 00.00 through 23.59.
EQQA118E 00.00 IS NOT ALLOWED AS DEADLINE TIME
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Valid deadline times are 00.01 through 24.00.
EQQA119W SPECIFIED OPERATION DEADLINE EARLIER THAN APPLICATION INPUT ARRIVAL
Explanation: Th operation deadline that you specified is earlier than the application input arrival time for the
application. This does not prevent you from saving the application description as it is.
System action: The operation deadline is accepted and the system waits for you to respond.
User response: Enter END to save the application description or make the deadline and the input arrival time
consistent.
EQQA120I SPECIFIED OPERATION INPUT ARRIVAL LATER THAN APPLICATION DEADLINE
Explanation: The operation input arrival time that you specified is later than the deadline time for the application.
This does not prevent you from saving the application description as it is.
System action: The input arrival time for the operation is accepted and the system waits for you to respond.
User response: Enter END to save the application description or make the operation input arrival and the application
deadline consistent.
EQQA121E SPECIFIED OPERATION DEADLINE EARLIER THAN OP INPUT ARRIVAL
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The deadline time must be later than the input arrival time.
EQQA122I SPECIFIED APPLICATION INPUT ARRIVAL LATER THAN AN OP INPUT ARRIVAL
Explanation: The application input arrival time that you specified is later than an operation input arrival time defined
in the OPER table. This does not prevent you from saving the application description as it is.
System action: The input arrival time for the application is accepted and the system waits for you to respond.
User response: Enter END to save the application description or make the input arrival times consistent.

Chapter 3. EQQAnnn Messages

EQQA123I EQQA138W

EQQA123I SPECIFIED OP INPUT ARRIVAL EARLIER THAN APPLICATION INPUT ARRIVAL
Explanation: The operation input arrival time that you specified is earlier than the input arrival time for the
application. This does not prevent you from saving the application description as it is.
System action: The input arrival time for the operation is accepted and the system waits for you to respond.
User response: Enter END to save the application description or make the input arrival times consistent.
EQQA124I SPECIFIED OP DEADLINE LATER THAN APPLICATION DEADLINE
Explanation: The operation deadline time that you specified is later than the deadline time for the application. This
does not prevent you from saving the application description as it is.
System action: The deadline time for the operation is accepted. The system waits for you to respond.
User response: Enter END to save the application description or make the deadline times consistent.
EQQA125I NO APPLICATION INPUT ARRIVAL TIME SPECIFIED YET
Explanation: No application input arrival time is specified for this application. This does not prevent you from saving
the application description as it is.
System action: The times specified for the operation are accepted. The system waits for you to respond.
User response: Enter END to save the application description, or make the deadline times consistent.
EQQA126E SPECIFY AT LEAST ONE RUNDAY
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA127E OUT-OF-EFFECT-FROM DATE PRECEDES IN-EFFECT-FROM DATE
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The out-of-effect-from date for a run cycle must be later than the in-effect-from date.
EQQA134E SUPPRESS IF LATE = YES ALLOWED ONLY WHEN TIME DEPENDENT = YES
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The SUPPRESS IF LATE option can be YES only when the TIME DEPENDENT option is specified as YES.
EQQA135E THE SMOOTHING FACTOR MUST BE A NUMBER 0 - 999
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA136E THE FEEDBACK LIMIT MUST BE A NUMBER 100 - 999
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA137E DEADLINE WTO IS NOT DEFINED OR INVALID
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Valid deadline WTO options are Y for Yes, and N for No.

| EQQA138W OPERATION IA OPIA LESS THAN OCCURRENCE IA OCCIA
| Explanation: The operation arrival date is earlier than the occurrence. This is accepted, but might not be what you
| intend.
| System action: None.
| User response: None.

Tivoli OPC Messages and Codes

EQQA200E EQQA205E

EQQA200E OPERATION NUMBER MUST BE 1 - 255
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA201E THE VARIABLE TABLE IS NOT DEFINED TO OPC
Explanation: Data entry error; see “Data Entry Errors” on page 2.
You have tried to define a variable table ID that does not exist in Tivoli OPC's database.
EQQA202E THE RUN CYCLE TYPE IS INVALID, ENTER EITHER N, X, R OR E
Explanation: Valid run cycle types are:
N
X
R
E

Normal offset-based run cycles.
Negative offset-based run cycles.
Regular rule-based run cycles.
Exception rule-based run cycles.

System action: The request is rejected.
User response: Change the run cycle type to one of the supported values.
EQQA203E THE FREE DAY RULE SPECIFICATION IS INVALID
Explanation: Data entry error; see “Data Entry Errors” on page 2.
A valid free day rule specification is any of the following:
E
1
2
3
4

Free days excluded.
Run on the closest workday before the free day.
Run on the closest workday after the free day.
Run on the free day.
Do not run at all.

EQQA204E YOU HAVE ENTERED AN INVALID VALUE IN THE CATALOG MANAGEMENT FIELD.
Explanation: The only valid values in this field are Y (Yes), N (No), and D (Deferred).
System action: The system waits for you to respond.
User response: Enter a valid value.
EQQA205E THE RUN CYCLE TYPE MUST BE SPECIFIED
Explanation: Valid run cycle types are:
N
X
R
E

Normal offset-based run cycles.
Negative offset-based run cycles.
Regular rule-based run cycles.
Exception rule-based run cycles.

System action: The request is rejected.
User response: Change the run cycle type to one of the supported values.

Chapter 3. EQQAnnn Messages

EQQA206E EQQA217E

EQQA206E THE FREE DAY RULE MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
A valid free day rule specification is any of the following:
E
1
2
3
4

Free days excluded.
Run on the closest workday before the free day.
Run on the closest workday after the free day.
Run on the free day.
Do not run at all.

EQQA207E AN IN-EFFECT-FROM DATE MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA208E AN OUT-OF-EFFECT-FROM DATE MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA209E THE RUN DAY OFFSET MUST BE A NUMBER FROM -999 TO -1 OR 1 TO 999
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA210E THE PRINT OPTION MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA211E THE PRINT OPTION CHARACTER IS INVALID
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Valid print option characters are A for always and C for conditionally.
EQQA212E WHEN TIME DEPENDENT = YES, SUPPRESS IF LATE MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The SUPPRESS IF LATE option must be specified when the TIME DEPENDENT option is specified as YES.
EQQA213E THE WS RESOURCE AMOUNT SPECIFIED MUST BE A NUMBER 0 - 99
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA214E THE JOB OPTION CHARACTER SPECIFIED IS INVALID
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Valid job option characters are Y for yes and N for no.
EQQA215E THE NUMBER OF PARALLEL SERVERS MUST BE 1 - 99
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA216E THE INPUT ARRIVAL DAY MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA217E THE INPUT ARRIVAL DAY MUST BE A NUMBER 0 - 99
Explanation: Data entry error; see “Data Entry Errors” on page 2.

Tivoli OPC Messages and Codes

EQQA218E EQQA231E

EQQA218E THE INPUT ARRIVAL TIME MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA219E THE NUMBER OF PARALLEL SERVERS MUST BE 1 FOR CPU OPERATIONS
Explanation: Operations on a computer workstation can use only one parallel server.
System action: The panel is redisplayed and the dialog waits for you to change the number of parallel servers.
User response: Change the number of parallel servers to one.
EQQA220E THE DEADLINE DAY MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA221E THE DEADLINE DAY OFFSET SPECIFIED MUST BE A NUMBER 0 - 99
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA222E THE DEADLINE TIME MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.

| EQQA223E THE JCL EDIT/BROWSE FUNCTION NEEDS A JOBNAME
Explanation: The JCL edit/browse option can be called only if a jobname has been specified.
System action: The panel is redisplayed with this error message.
User response: Specify a jobname.
EQQA226E THE OPERATION NUMBER MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA228E THE SPECIFIED SPECIAL RESOURCE HELD OPTION IS INVALID
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Valid special resource held options are S for shared and X for exclusive.
EQQA229W OFFSET WRKOFF IS GREATER THAN PERIOD INTERVAL WRKINT
Explanation: The number that you specified for a positive or negative run day offset is greater than the period
interval value. If the period is type A, no occurrences are created in the long term plan (LTP) for this offset. If the
period type is W, the message is issued as a warning but occurrences can still be created in the LTP.
System action: The system waits for you to respond.
User response: Check if the offset value provides the desired run dates. Correct the value if required. If LTP
occurrences should be created, and the period type is A, you must change either the period interval value or the run
cycle offset value. Press the END key to save the offset values.
EQQA230E THE VALID RESPONSE IS Y OR N FOLLOWED BY ENTER KEY
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Y deletes the application and N cancels the deletion of the application.
EQQA231E A PERIOD NAME MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.

Chapter 3. EQQAnnn Messages

EQQA232E EQQA242E

EQQA232E UP TO 24 (12 POSITIVE AND 12 NEGATIVE) RUNDAY OFFSETS ARE ALLOWED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA233E THE SPECIFIED HIGHEST RETURN CODE MUST BE A NUMBER 0 - 4095
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA234E THE APPLICATION ID IS NOT SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA235E THE FIRST CHARACTER IN APPLICATION ID MUST BE ALPHABETIC
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA236E THERE IS AN INVALID CHARACTER IN THE APPLICATION ID
Explanation: Data entry error; see “Data Entry Errors” on page 2.
An application ID can be made up of the following valid characters: A through Z, 0 through 9, and national characters
(that is, #, $, and @).
EQQA237E ENTER THE OWNER ID
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA238E THE PRIORITY MUST BE A NUMBER FROM 1 TO 9
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA239E ENTER THE STATUS, A OR P
Explanation: Data entry error; see “Data Entry Errors” on page 2.
A stands for active and P for pending.
EQQA240E SPECIFY A VALID-FROM DATE
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA241E THE MAXIMUM 4 ACTIVE VERSIONS ALREADY EXIST
Explanation: You have attempted to enter an active version of an application description but the maximum four
active versions of the application description already exist in the application description database.
System action: The system waits for you to respond.
User response: Reenter with a new application ID, valid-from data, or status; or delete one of the four active
versions.
EQQA242E THE MAXIMUM 4 PENDING VERSIONS ALREADY EXIST
Explanation: You have attempted to enter a pending version of an application description but the maximum four
pending versions of the application description already exist in the application description database.
System action: The system waits for you to respond.
User response: Reenter with a new application ID, valid-from data, or status; or delete one of the four pending
versions.

Tivoli OPC Messages and Codes

EQQA243E EQQA250I

EQQA243E A PENDING VERSION CANNOT BE COPIED
Explanation: You have attempted to copy a pending version of the application description but only an active version
can be copied.
System action: The request is rejected and the system waits for you to respond.
User response: Select an active version to copy.
EQQA244E APPLICATION ID, STATUS, OR VALID-FROM MUST BE CHANGED
Explanation: In the copy function, one of the three key fields (application ID, status, or valid-from key fields) must be
changed to create a new version of an existing application description, or a new application description.
System action: The system waits for you to respond.
User response: Change one of the three key fields.
EQQA245E THE RUN DAY OFFSET TABLE CONTAINS DUPLICATES
Explanation: The list of run days cannot contain duplicate offsets.
System action: The system waits for you to respond.
User response: Use the row command D to delete the duplicate run day offsets or change the duplicates.
EQQA246E SPECIFY A WORK STATION NAME
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA247E THE OPERATION TABLE CONTAINS DUPLICATE OPERATION NUMBERS
Explanation: The list of operations cannot contain duplicate operation numbers.
System action: The system waits for you to respond.
User response: Use the row command D to delete the duplicate operation numbers or change the duplicates.
EQQA248E THE PREDECESSOR TABLE CONTAINS DUPLICATE PREDECESSORS
Explanation: The list of predecessors cannot contain duplicate predecessors.
System action: The system waits for you to respond.
User response: Use the row command D to delete the duplicate predecessors or change the duplicates.
EQQA249E THE SPECIAL RESOURCE TABLE CONTAINS DUPLICATE RESOURCES
Explanation: The list of special resources cannot contain duplicate resources.
System action: The system waits for you to respond.
User response: Use the row command D to delete the duplicate resources or change the duplicates.
EQQA250I AD DOES NOT EXIST IN DATA BASE
Explanation: The specified external predecessor application does not exist in the application description database.
This does not prevent you from saving the application as it is.
System action: The system waits for you to respond.
User response: Either enter END to save the external predecessor application or change the external predecessor
application.

Chapter 3. EQQAnnn Messages

EQQA251E EQQA257E

EQQA251E AD DOES NOT EXIST IN DATA BASE, ENTER WS NAME
Explanation: The specified external predecessor application does not exist in the application description database,
so the predecessor workstation name cannot be picked up. Therefore, you must specify the predecessor workstation
name.
System action: The system waits for you to respond.
User response: Enter the workstation name of the external predecessor.
EQQA252I PRED OP DOES NOT EXIST IN PREDECESSOR APPLICATION
Explanation: The specified external predecessor operation does not exist in the external predecessor application.
This does not prevent you from saving the application as it is.
System action: The system waits for you to respond.
User response: Either enter END to save the external predecessor operation or change the external predecessor
operation.
EQQA253E PRED OP DOES NOT EXIST IN PREDECESSOR APPLICATION, ENTER WS NAME
Explanation: The specified external predecessor operation does not exist in the external predecessor application, so
the predecessor workstation name cannot be picked up. Therefore, you must specify the predecessor workstation
name.
System action: The system waits for you to respond.
User response: Enter the predecessor workstation name.
EQQA254E PRINT OPERATION OP MAY HAVE ONLY ONE CPU PREDECESSOR
Explanation: The print operation number (OP) can have only one CPU internal predecessor.
System action: The system waits for you to respond.
User response: Delete all except one of the internal predecessors.
EQQA255E JOB SETUP OP OP MUST HAVE THE SAME JOBNAME AS A CPU SUCCESSOR
Explanation: The job setup operation number (OP) must have the same job name as any of its CPU successors.
System action: The system waits for you to respond.
User response: Enter a valid CPU successor job name.
EQQA256E PRINT OP OP MUST HAVE THE SAME JOBNAME AS THE CPU PREDECESSOR
Explanation: The print operation number (OP) must have the same job name as its CPU predecessor.
System action: The system waits for you to respond.
User response: Enter a valid CPU predecessor job name.
EQQA257E THIS VERSIONS VALID-FROM DATE CAN NOT PRECEDE MSGVALF
Explanation: The application valid-from date for a previously defined application description version has been
modified. The valid-from date now falls within the validity period of another version of this application description.
System action: The system waits for you to respond.
User response: Change the valid-from date so that it is later than the date specified in MSGVALF. Review the
validity periods for versions of this application. If a new version is required for the date that you specified, you can
copy a version of the application description and specify the required valid-from date.

Tivoli OPC Messages and Codes

EQQA258I EQQA267E

| EQQA258I AD HAS PENDING STATUS
| Explanation: The specified external predecessor application has pending status. This does not prevent you from
| saving the application as it is.
| System action: The system waits for you to respond.
| User response: Enter END to save the external predecessor application as it is, or change it.
EQQA260E SAME DATE SPECIFIED FOR IN-EFFECT-FROM AND OUT-OF-EFFECT-FROM
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The out-of-effect-from date must be later than the in-effect-from date.
EQQA261E NO MORE THAN 12 ITEMS CAN BE SPECIFIED
Explanation: The print function can handle up to 12 print items at a time.
System action: The system waits for you to respond.
User response: Delete print items so that the total does not exceed 12.
EQQA262E NO MORE THAN 5 ITEMS CAN BE SELECTED
Explanation: No more than five sort items can be selected to be part of the cross reference list.
System action: The system waits for you to respond.
User response: Delete sort items so that the total is not greater than five.
EQQA263E THE SORT ORDER SPECIFIED IS NOT A NUMBER 1 - 5
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA264E THE SPECIFIED SORT ORDER CONTAINS DUPLICATE DIGITS
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA265E THE SPECIFIED SORT ORDER SEQUENCE IS INVALID
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The digits representing the sort order must be continuous and start with the digit 1.
EQQA266E YOU ARE NOT AUTHORIZED TO READ THE OI DATA BASE
Explanation: You have attempted to read the operator instruction (OI) database, but you are not authorized to read
it.
System action: The system waits for you to respond.
User response: If you require access to the OI database, contact your security administrator
EQQA267E YOU ARE NOT AUTHORIZED TO UPDATE THE OI DATA BASE
Explanation: You have attempted to update the operator instruction (OI) database, but you are not authorized to
update it.
System action: The system waits for you to respond.
User response: If you require update authority to the OI database, contact your security administrator

Chapter 3. EQQAnnn Messages

EQQA271E EQQA280E

EQQA271E THERE IS AN INVALID CHARACTER IN JOBNAME
Explanation: Data entry error; see “Data Entry Errors” on page 2.
A job name can be made up of the following valid characters: A through Z, 0 through 9, and national characters (that
is, #, $, and @). The first character must be alphabetic or national, the remaining characters can be alphabetic,
numeric, and national characters.
EQQA272E THE FIRST CHARACTER IN GROUP ID MUST BE ALPHABETIC
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA273E THERE IS AN INVALID CHARACTER IN GROUP ID
Explanation: Data entry error; see “Data Entry Errors” on page 2.
A group ID can be made up of the following valid characters: A through Z, 0 through 9, and national characters (that
is, #, $, and @).
EQQA274E THE FIRST CHARACTER IN JOBNAME MUST BE ALPHABETIC
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA275E THE WS RESOURCE AMOUNT MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA276E THE NUMBER OF PARALLEL SERVERS MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA277E THE FILTER NUMBER FNR IS NOT SUPPORTED
Explanation: This message indicates a programming error.
System action: The system waits for you to respond.
User response: Contact your system programmer.
System programmer response: Contact your IBM representative.
EQQA278E THE VERIFICATION NUMBER VNR IS NOT SUPPORTED
Explanation: This message indicates a programming error.
System action: The system waits for you to respond.
User response: Contact your system programmer.
System programmer response: Contact your IBM representative.
EQQA279E THE TABLE OF UPDATES CONTAINS DUPLICATE UPDATES
Explanation: The table of pending updates cannot contain duplicate updates.
System action: The system waits for you to respond.
User response: Use the row command D to delete the duplicate updates or change the duplicates.
EQQA280E THE TABLE CONTAINS DUPLICATE ROWS
Explanation: The table cannot contain duplicate rows.
System action: The system waits for you to respond.
User response: Use the row command D to delete the duplicate row items or change the duplicates.

Tivoli OPC Messages and Codes

EQQA281E EQQA289E

EQQA281E NO MORE THAN 25 PENDING UPDATES CAN BE SPECIFIED IN THIS SESSION
Explanation: It is not allowed to specify more than 25 pending updates in this session.
System action: The system waits for you to respond.
User response: Use the row command D to delete pending updates or cancel the latest pending updates.
EQQA282E THE SPECIFIED BATCH JOB TYPE OPTION IS INVALID
Explanation: Data entry error; see “Data Entry Errors” on page 2.
A valid batch job type is T for trial run or U for updating run.
EQQA283E NO UPDATE AUTHORITY TO APPLICATION DESCRIPTION DATA BASE
Explanation: You have attempted to update the application description database, but you are not authorized to
update it.
System action: The system waits for you to respond.
User response: If you need to update the application description database, contact your security administrator
EQQA284E YOU ARE NOT AUTHORIZED TO READ THE CALENDAR DATA BASE
Explanation: You have attempted to read the calendar database, but you are not authorized to read it.
System action: The system waits for you to respond.
User response: If you need access to the calendar database, contact your security administrator
EQQA285E YOU ARE NOT AUTHORIZED TO READ THE WS DESCRIPTION DATA BASE
Explanation: You have attempted to read the workstation (WS) description database, but you are not authorized to
read it.
System action: The system waits for you to respond.
User response: If you need to access the WS description database, contact your security administrator.
EQQA286E THE DATA SPECIFIED IS TOO LONG
Explanation: The data that you have specified for mass updating is longer than the maximum length allowed for the
data item.
System action: The system waits for you to respond.
User response: Check the maximum data length allowed and enter the correct data.
EQQA287E THE CONVERSION NUMBER CNR IS NOT SUPPORTED
Explanation: This message indicates a programming error.
System action: The system waits for you to respond.
User response: Contact your system programmer.
System programmer response: Contact your IBM representative.
EQQA288E THE RESCALE FACTOR IS NOT SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA289E THE RESCALE FACTOR MUST BE A NUMBER 0 - 999
Explanation: Data entry error; see “Data Entry Errors” on page 2.

Chapter 3. EQQAnnn Messages

EQQA290E EQQA302E

EQQA290E VALID DATA IS A NUMBER 1 - 99
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA291E VALID DATA IS A NUMBER 0 - 99
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA292E VALID DATA IS A NUMBER 100 - 999
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA293E VALID DATA IS A NUMBER 0 - 999
Explanation: Data entry error; see “Data Entry Errors” on page 2.

| EQQA294E PERIOD/RULE NAME FILTER IS NOT RELEVANT FOR CURRENT DATA ITEM
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA295E JOBNAME FILTER IS NOT RELEVANT FOR CURRENT DATA ITEM
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA296E WS NAME FILTER IS NOT RELEVANT FOR CURRENT DATA ITEM
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA297E NEITHER JOBNAME NOR WS NAME IS RELEVANT FOR CURRENT DATA ITEM
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA298E FILTER CRITERIA ARE NOT RELEVANT FOR OWNER ID
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA299I DATA SET NAME GIVEN; SPECIFIED APPLICATION ID(S) IGNORED
Explanation: When the name of the dataset is specified, it is not necessary to specify the application IDs.
System action: None.
User response: None.
EQQA300E VALID DATA IS A NUMBER 1 - 255
Explanation: Data entry error; “Data Entry Errors” on page 2.
EQQA301E THERE MUST BE AT LEAST ONE OPERATION IN AN APPLICATION
Explanation: The application has no operations. You must specify at least one operation.
System action: The system waits for you to respond.
User response: Specify one or more operations for the application.
EQQA302E PREDECESSOR OPERATION PO IS NOT FOUND FOR OPERATION OP
Explanation: The predecessor operation (predecessor operation number PO) was not found for the operation
(operation number OP). An internal predecessor operation must exist within the application.
System action: The system waits for you to respond.
User response: Enter an existing operation number.

Tivoli OPC Messages and Codes

EQQA303E EQQA314E

EQQA303E OPERATION OP IS NOT CONNECTED TO APPLICATION
Explanation: The operation (operation number OP) has no predecessor or successor connections to the application.
System action: The system waits for you to respond.
User response: Enter or change an internal predecessor to establish a correct application link.
EQQA304E OPERATION OP SPECIFIES WORK STATION OPWS, WHICH IS NOT FOUND
Explanation: The operation (operation number OP) of this application specifies a workstation (workstation name
OPWS), which was not found in the workstation description database.
System action: The system waits for you to respond.
User response: Enter an existing workstation name or use the Workstation Description dialog to define the
workstation name.
EQQA305E DEPENDENCIES INCLUDING OPERATION OP FORM A LOOP
Explanation: A loop was detected in the operation (operation number OP) dependency network which must be
corrected. For example, operation 10 has operation 5 as its predecessor, and operation 5 has operation 10 as its
predecessor.
System action: The system waits for you to respond.
User response: Correct the found loop with these internal predecessors.
EQQA306E VALID-FROM DATE LATER THAN VALID-TO DATE
Explanation: Data entry error; see “Data Entry Errors” on page 2.
When modifying an application, the valid-from date cannot be changed to a date later than the valid-to date.
EQQA307E OPERATION INPUT ARRIVAL TIME MUST BE SPECIFIED FOR A TIME JOB
Explanation: Data entry error; see “Data Entry Errors” on page 2.
If the time-dependent job option is specified as YES, an operation input arrival time must be specified.
EQQA308E JOB SETUP OPERATION OP MUST HAVE A CPU SUCCESSOR
Explanation: The job setup operation (operation number OP) must have a CPU successor operation.
System action: The system waits for you to respond.
User response: Enter the job setup operation number as a CPU predecessor number.
EQQA309E PRINT OPERATION OP MUST HAVE A CPU PREDECESSOR
Explanation: The print operation (operation number OP) must have a CPU predecessor operation.
System action: The system waits for you to respond.
User response: Enter a CPU operation number as the predecessor number.
EQQA310E FIELD FORMAT SPECIFIED AS DBCS BUT INPUT NOT BRACKETED DBCS
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA311E DBCS PART OF BRACKETED FIELD IS BLANK
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA314E THE OWNER ID IS NOT SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.

Chapter 3. EQQAnnn Messages

EQQA315E EQQA403I

EQQA315E FORMAT OF OWNER ID SPECIFIED AS DBCS BUT INPUT NOT BRACKETED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA316E DBCS PART OF BRACKETED OWNER ID FIELD IS INVALID
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA317E DBCS FIELD CONTAINS UNPAIRED SHIFT-OUT / SHIFT-IN CHARACTER
Explanation: The field indicated by the cursor contains one or more superfluous shift-out or shift-in characters.
System action: The data is rejected.
User response: Correct data and reenter.
EQQA318E DBCS PART CONTAINS INVALID DBCS-CHARACTER
Explanation: The field indicated by the cursor contains out-of-range DBCS characters. With the exception of DBCS
blank, X'4040', each byte must be within the range X'41' - X'FE'.
System action: The data is rejected.
User response: Correct data and reenter.
EQQA319E DBCS PART CONTAINS AN ODD NUMBER OF BYTES
Explanation: The field indicated by the cursor is specified as a DBCS field, and requires two bytes per character.
System action: The data is rejected.
User response: Correct data and reenter.
EQQA400E NO MATCHING JOB DESCRIPTION(S) FOUND
Explanation: No job descriptions were found matching the generic or non-generic search criteria that you specified
to generate a list of jobs.
System action: The system waits for you to respond.
User response: Try again, with different selection criteria.
EQQA401E NO MATCHING JOB DESCRIPTION FOUND
Explanation: The job that you selected from a list does not have a matching job description. The job may have
been deleted or modified after the list of job entries was generated.
System action: The request is rejected.
User response: Return to the Job Selection Criteria panel and press Enter to generate a fresh list of jobs.
EQQA402I NO RUNCYCLES FOUND FOR THIS JOB
Explanation: You tried to display the run cycles for a job for which no run cycles have been specified.
System action: The request is rejected.
User response: None.
EQQA403I THE JOB IS CREATED
Explanation: The job has been created and saved as a job description.
System action: None.
User response: None.

Tivoli OPC Messages and Codes

EQQA404I EQQA413E

EQQA404I THE SELECTED JOB IS MODIFIED
Explanation: The job has been modified and saved as a job description.
System action: None.
User response: None.
EQQA405E THE WS SPECIFIED IS NOT A CPU WS OR A GENERAL WS WITH WTO SET
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA406E A JOB WITH THIS ID ALREADY EXISTS
Explanation: You tried to create a job with an ID that already exists in the application description database.
System action: The system waits for you to respond.
User response: Enter a unique job ID. If you want to create a new version of an existing job, use the copy function.
EQQA407E THE JOB IS BEING UPDATED BY ANOTHER USER
Explanation: Another user is currently updating the job that you want to update.
System action: The system waits for you to respond.
User response: Try again later.
EQQA408E THE JOBNAME HAS NOT BEEN SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA409I THE SELECTED JOB IS DELETED
Explanation: The selected job has been deleted from the job description database.
System action: None.
User response: None.
EQQA410E THE JOB DIALOG CANNOT BE USED WHEN DBCS IS DEFINED FOR APPLID
Explanation: You have tried to enter the job description dialog but DBCS bracketed input has been defined for
application IDs in your installation. The application ID of job descriptions must be the same as the job name. Job
names cannot be entered in DBCS bracketed format.
System action: The panel is redisplayed with this error message.
User response: Use the Application Description dialog instead.
EQQA411E WORK STATION MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The workstation pointed to by the cursor must be entered.
EQQA412E WORK STATION SPECIFIED IS NOT A VALID JCL PREPARATION WORK STATION
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The workstation must be a workstation with the JCL preparation indicator set to Y.
EQQA413E WORK STATION SPECIFIED IS NOT A VALID MANUAL WORK STATION
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The workstation must be a MANUAL workstation.

Chapter 3. EQQAnnn Messages

EQQA414E EQQA502E

EQQA414E 24.00 NOT ALLOWED AS A FROM-RUN TIME
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA415E NO PREDECESSORS FOUND THAT MATCH SELECTION CRITERIA
Explanation: You tried to select predecessors for a job. No predecessors were found with the specified selection
criteria.
System action: The request is rejected.
User response: None.
EQQA416E 00.00 NOT ALLOWED AS A TO-RUN TIME
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQA418E FROM-RUN TIME MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Either a run time has been entered or run cycles are missing.
User response: Specify a from-run time.
EQQA419E INTERNAL PREDECESSORS ARE NOT ALLOWED FOR JDS
Explanation: Data entry error; see “Data Entry Errors” on page 2.
If you are currently defining a job, the application ID must be completed for a predecessor.
EQQA500E GROUP DEFINITION CANNOT HAVE OPERATIONS
Explanation: A group definition cannot contain operations.
System action: The system waits for you to respond.
User response: If operations are to be defined in this application, change the application type to A.
EQQA501W GROUP DEFINITION APPLGRID COULD NOT BE FOUND IN AD FILE
Explanation: The current application description (AD) references an application group definition that cannot be found

| in the AD database. Either you entered the wrong name, or the application group has not yet been created, or the
| application group has a pending status (not selectable for processing), or you are not authorized to reference it. If you
want to, and if you are authorized, you can save the current application description while it references an application
group that does not exist. Such an application description is not used to create occurrences in the long term plan
(LTP).
System action: The system waits for you to respond.

| User response: If you want the application description to be selected by LTP programs, enter the correct group
| definition ID, or create the referenced group definition with the application status field set to A.
EQQA502E GROUP DEFINITION ID FIELD CAN BE FILLED IN ONLY WHEN NO RUN CYCLES
Explanation: You cannot specify a group definition ID when run cycles already exist.
System action: The system waits for you to respond.
User response: Either erase the data in the group definition ID field or delete the run cycles for the application.

Tivoli OPC Messages and Codes

EQQA503E EQQA510E

EQQA503E GROUP DEFINITION CANNOT BELONG TO ANOTHER GROUP
Explanation: You can specify a group definition ID only when the application type is A.
System action: The system waits for you to respond.
User response: Change the application type to A or erase the group definition ID field.
EQQA504E APPLICATION TYPE MUST BE OCHCSTN, OCHCGRP OR BLANK

| Explanation: The selection criteria that you have specified contains an invalid application type. OCHCSTN and
| OCHCGRP are the national language characters for 'A' (applications) and 'G' (group definitions).
| System action: The system waits for you to respond.
| User response: Enter the correct characters for applications or group definitions, or blank to select both applications
| and group definitions.
EQQA505E TYPE MUST BE OCHCSTN OR OCHCGRP

| Explanation: You have specified an invalid application type. OCHCSTN and OCHCGRP are the national language
| characters for 'A' (applications) and 'G' (group definitions).
| System action: The system waits for you to respond.
| User response: Enter one of the supported application types.
EQQA506I RUN COMMAND NOT ALLOWED. APPLICATION IN A GROUP CONTAINS NO RUN CYCLE
Explanation: An application that references a group definition for run cycle information does not itself contain run
cycles.
System action: The request is rejected.
User response: None.
EQQA507I OPER COMMAND NOT ALLOWED. A GROUP DEFINITION DOES NOT HAVE OPERATIONS
Explanation: A group definition (application type=G) does not contain operations.
System action: The request is rejected.
User response: None.
EQQA508E RUN CYCLES ARE NOT ALLOWED FOR A JOB DESCRIPTION IN A GROUP
Explanation: A job description that references a group definition for run cycle information cannot itself contain run
cycles.
System action: The system waits for you to respond.
User response: Either erase the data in the group definition ID field or delete the run cycles for this job description.
EQQA509I NO RUN CYCLES FOR A JOB DESCRIPTION IN A GROUP
Explanation: A job description that references a group definition for run cycle information cannot itself contain run
cycles.
System action: The request is rejected.
User response: None.
EQQA510E PRIORITY CANNOT BE SPECIFIED FOR A GROUP DEFINITION
Explanation: You cannot specify priority for a group definition.
System action: The system waits for you to respond.
User response: Erase the data in the priority field.

Chapter 3. EQQAnnn Messages

EQQA511E EQQA521E

EQQA511E CALENDAR CANNOT BE SPECIFIED FOR AN APPLICATION IN A GROUP
Explanation: A calendar ID cannot be specified for an application that references a group definition for run cycle
information.
System action: The system waits for you to respond.
User response: Either erase the data in the calendar ID field or erase the data in the group definition ID field.
EQQA512E GROUP DEFINITION CANNOT BELONG TO ANOTHER GROUP
Explanation: Group definitions can be specified only when the application type is A (application) or blank (both
application and group definition).
System action: The system waits for you to respond.
User response: Change the application type to A or blank, or erase the data in the group definition ID field.
EQQA513I COMMAND NOT VALID FOR A GROUP DEFINITION
Explanation: Calculate and print rundays, or Modify long term plan (LTP) can be requested only for applications.
System action: The request is rejected.
User response: None.
EQQA514W GROUP DEFINITION HAS NO RUN CYCLES
Explanation: The group definition contains no run cycle information. Applications that reference this group definition
are automatically included in the long term plan.
System action: The system waits for you to respond.
User response: If you want to use this group definition to schedule applications, specify run cycle information.
EQQA515E CALENDAR CANNOT BE SPECIFIED FOR A JOB IN A GROUP
Explanation: A calendar ID cannot be specified for a job that references a group definition for run cycle information.
System action: The system waits for you to respond.
User response: Either erase the data in the calendar ID field or erase the data in the group definition ID field.
EQQA516E NO RUN CYCLES FOR AN APPLICATION IN A GROUP
Explanation: An application that references a group definition for run cycle information cannot itself contain run
cycles.
System action: The request is rejected.
User response: None.
EQQA520E THE RULE ON WHICH THE RUN CYCLE IS BASED MUST BE DEFINED
Explanation: A rule-based run cycle (type R or E) was inserted or replicated in the run cycle table, but no rule
definition was specified.
System action: The request is rejected.
User response: Use the S row command to select the Rule Modification panel and define the rule.
EQQA521E A VALID RULE NAME MUST BE SPECIFIED
Explanation: You have not entered a valid rule name. A valid rule name hasa maximum of 8 characters, where the
first character is alphabetical and the remaining characters are alphanumeric or national.
System action: The request is rejected.
User response: Specify a valid rule name.

Tivoli OPC Messages and Codes

EQQA522E EQQA523E

EQQA522E THE RULE NAME MUST BE UNIQUE WITHIN AN AD
Explanation: You have specified a rule name that has already been defined for a rule-based run cycle for this
application description.
System action: The request is rejected.
User response: Specify a unique rule name.
EQQA523E THE RUN CYCLE TYPE HAS BEEN INCORRECTLY MODIFIED
Explanation: You have modified the type from an offset-based run cycle to a rule-based run cycle, or vice versa.
You can only change type within the run cycle subtype; that is, N and X for offset-based run cycles, or R and E for
rule-based run cycles.
System action: The request is rejected.
User response: Specify one of the required types or create a new run cycle.

Chapter 3. EQQAnnn Messages

Tivoli OPC Messages and Codes

EQQC001I EQQC006E

Chapter 4. EQQCnnn Messages
EQQC001I THE AUTOMATIC RECOVERY SUBTASK HAS STARTED
Explanation: The automatic job recovery subtask has been successfully initialized.
System action: Automatic job recovery processing is started.
User response: None.
EQQC002E THE AUTOMATIC RECOVERY INITIALIZATION FAILED
Explanation: The automatic job recovery subtask was not initialized because there is an error in the AROPTS
initialization statement.
System action: Automatic job recovery initialization is terminated.
Problem determination: This message is preceded by a message in the Tivoli OPC message log giving the reason
for this error message.
User response: Contact your system programmer.
System programmer response: Correct the error in the AROPTS initialization statement and restart Tivoli OPC.
EQQC003I THE AUTOMATIC RECOVERY SUBTASK HAS ENDED NORMALLY
Explanation: This message is issued when the Tivoli OPC subsystem is being stopped by an operator command.
System action: The Tivoli OPC termination processing continues.
User response: None.
EQQC004E STARTTIME OR ENDTIME OPTION TIME IN AROPTS STATEMENT IS NOT VALID
Explanation: The STARTTIME or ENDTIME option in the AROPTS initialization statement is not specified in a valid
Tivoli OPC time format. The option TIME must be a 4-digit decimal number in the format HHMM, where HH is from
00 through 23, and MM is from 00 through 59.
System action: Automatic job recovery initialization is terminated.
User response: Correct the STARTTIME or ENDTIME value in the AROPTS initialization statement. Stop Tivoli
OPC and restart it.
EQQC005E THE AUTOMATIC RECOVERY INITIALIZATION FAILED, MODULE EQQCASEM NOT FOUND
Explanation: The initialization of the automatic job recovery subtask failed because the load module EQQCASEM
could not be found in a library that can be accessed by Tivoli OPC.
System action: Automatic job recovery initialization is terminated.
User response: Contact your system programmer.
System programmer response: Make sure that the load module EQQCASEM is present in a library that can be
accessed by Tivoli OPC. Stop the Tivoli OPC started task and restart it.
EQQC006E HOUR AND MINUTE MUST BOTH BE TWO-DIGIT NUMBERS
Explanation: A nonnumeric time value has been specified.
System action: Processing continues.
System programmer response: Reenter a numeric time value.

 Copyright IBM Corp. 1991, 1999

EQQC007E EQQC012W

EQQC007E AN ABEND OCCURRED IN THE AUTOMATIC RECOVERY SUBTASK, IT IS RESTARTED
Explanation: An error has caused the automatic job recovery subtask to end abnormally, but it has been able to
restart.
System action: Automatic job recovery resumes normal processing, but one or more requests for service may have
been rejected.
Problem determination: At abend, a dump is written to the SYSxDUMP dataset.
User response: Inform your system programmer about the error and, if the error can be reproduced, of the
sequence of dialog requests leading to the error.
System programmer response: Collect relevant information about the sequence of events leading to this error.
Make sure that the dump dataset and the Tivoli OPC message log are available for inspection. Contact your IBM
representative.
EQQC008E HOUR MUST BE IN THE RANGE 0 TO 23
Explanation: A time value has been specified where the hour number is not valid.
System action: Processing continues.
System programmer response: Reenter the time value and specify an hour number in the range 0 through 23.
EQQC009E MINUTE MUST BE IN THE RANGE 0 TO 59
Explanation: A time value has been specified where the minute number is not valid.
System action: Processing continues.
System programmer response: Reenter the time value and specify a minute number in the range 0 through 59.
EQQC011W AUTOMATIC RECOVERY REQUEST FAILED, SERVICE INACTIVE
Explanation: Automatic job recovery requires service from other Tivoli OPC subtasks. When automatic job recovery
was initiated to determine whether or not recovery should be performed for the job that ended in error, the service
SERVICE was down (not available).
System action: No recovery attempt is made and the job remains ended in error.
Problem determination: To determine why the service is not available, review the earlier messages in the Tivoli
OPC message log. For job tracking, consider the messages that mention the normal mode manager.
User response: Use the ended-in-error list of the Modify Current Plan dialog to decide whether or not a new
automatic job recovery attempt should be made for the job that ended in error.
System programmer response: Check why the service SERVICE was down.
EQQC012W AUTOMATIC RECOVERY REQUEST FAILED, CANNOT OPEN FILE FILE
Explanation: Automatic job recovery requires access to Tivoli OPC VSAM files. Failure to open one of these files
prevented automatic job recovery from checking whether or not recovery should be performed for the job that ended in
error. FILE is the name of the VSAM file that could not be opened.
System action: No recovery attempt is made and the job remains ended in error.
Problem determination: To determine why the file cannot be opened, review the earlier messages in the Tivoli OPC
message log.
User response: Use the ended-in-error list of the Modify Current Plan dialog to decide whether or not a new
automatic job recovery attempt should be made for the job that ended in error.
System programmer response: Check with your system programmer why the file FILE could not be opened.

Tivoli OPC Messages and Codes

EQQC013W EQQC022I

EQQC013W AUTOMATIC RECOVERY REQUEST FAILED, CANNOT ALLOCATE BUFFERS
Explanation: A storage allocation error prevented automatic job recovery from checking whether or not recovery
should be performed for the job that ended in error. This message may be followed by message EQQC045I with
reason code 50, which identifies the job checked by automatic job recovery.
System action: No recovery attempt is made and the job remains ended in error.
User response: Use the ended-in-error list of the Modify Current Plan dialog to decide whether or not a new
automatic job recovery attempt should be made for the job that ended in error.
System programmer response: Stop Tivoli OPC and restart it in a larger region.
EQQC014W AUTOMATIC RECOVERY REQUEST FAILED DUE TO I/O ERROR
Explanation: An I/O error prevented automatic job recovery from determining whether or not recovery should be
performed for the job that has ended in error. This message may be followed by message EQQC045I with reason
code 50, which identifies the job checked by automatic job recovery.
System action: No recovery attempt is made and the job remains ended in error.
Problem determination: Review the earlier messages in the Tivoli OPC message log for a message issued for the
I/O error.
User response: Use the ended-in-error list of the Modify Current Plan dialog to decide whether or not a new
automatic job recovery attempt should be made for the job that ended in error.
System programmer response: Refer to the associated I/O error message for guidance.
EQQC021W NO AUTOMATIC RECOVERY TEST BECAUSE NO ERROR INFORMATION IN JNT RECORD
Explanation: When a job fails, error information about the failing operation is saved in the job name table (JNT)
record. Automatic job recovery was initiated but could not determine if recovery should be performed for the failed job
because no error information was available in the JNT record. This message is followed by message EQQC045I with
reason code 50, which identifies the job checked by automatic job recovery.
System action: No recovery attempt is made and the job remains ended in error.
Problem determination: Review the Tivoli OPC message log for inconsistencies at the time that the job ended in
error. Also review the event dataset for the completion of the job. Refer to Tivoli OPC Diagnosis Guide and
Reference for the layout of the record in the event dataset.
User response: If any recovery actions by automatic job recovery were required for the job that failed, the actions
must be initiated manually. Use the Modify Current Plan dialog to initiate the actions.
If you use automatic job recovery together with catalog management and have defined the RESSTEP parameter of
the RECOVER statement, specify STEPEVENTS(ALL) on the EWTROPTS statement. Otherwise automatic job
recovery and catalog management is not invoked.
System programmer response: Check the Tivoli OPC message log for any messages issued at the time that the
job ended in error to determine why no JNT record exists.

| EQQC022I AUTOMATIC RECOVERY ACTION POSTPONED FOR OPERATION OPNO IN APPLICATION ADID.
|
CATALOG MANAGEMENT PENDING
Explanation: When the automatic recovery for this operation was about to start, Tivoli OPC found that a catalog
management action for this operation was in progress. The automatic recovery for this operation is postponed until
catalog management has finished its processing for the operation.
System action: The recovery attempt is postponed.
User response: None.

Chapter 4. EQQCnnn Messages

EQQC023W EQQC027W

EQQC023W NO AUTOMATIC RECOVERY TEST BECAUSE NO JCL RECORD FOR THE OPERATION
Explanation: The JCL record could not be read. This prevented automatic job recovery from determining whether or
not recovery should be performed for the job that ended in error. This message is followed by message EQQC045I
with reason code 50, which identifies the job checked by automatic job recovery.
System action: No recovery attempt is made and the job remains ended in error.
Problem determination: Review the Tivoli OPC message log for inconsistencies at the time that the job ended in
error.
User response: If any recovery actions by automatic job recovery were required for the job that failed, the actions
must be initiated manually. Use the Modify Current Plan dialog to initiate the actions.
System programmer response: Check the Tivoli OPC message log for any messages issued at the time that the
job ended in error to determine why the JCL record could not be read.
EQQC024W NO AUTOMATIC RECOVERY TEST BECAUSE OPERATION RECORD MODIFIED
Explanation: Automatic job recovery could not determine whether or not recovery should be performed for the job
that ended in error because the operation record indicates that the operation no longer has the error status.
System action: No recovery attempt is made for the job that ended in error.
User response: None.
EQQC026W NO AUTOMATIC RECOVERY TEST BECAUSE JCL MEMBER IS BEING USED
Explanation: Automatic job recovery could not determine whether or not recovery should be performed for the job
that ended in error, because the member on the JCL repository file (ddname EQQJ1SDS and EQQJS2DS) was being
used by another Tivoli OPC subtask. This message is followed by message EQQC045I with reason code 50, which
identifies the job checked by automatic job recovery.
System action: No recovery attempt is made and the job remains ended in error.
User response: When the EQQJSxDS JCL member is free, you can initiate a new automatic job recovery attempt
for the job that ended in error by using the ended-in-error list of the Modify Current Plan dialog.
EQQC027W NO AUTOMATIC RECOVERY BECAUSE PROCLIB MEMBER NOT FOUND
Explanation: No automatic job recovery could be performed for the job that ended in error because the RECOVER
statement that matched the error specifies a procedure library member that could not be found. This message is
followed by message EQQC045I with reason code 50, which identifies the job checked by automatic job recovery.
System action: No recovery attempt is made and the job remains ended in error.
Problem determination: Review the JCL to determine the procedure library member name. The selected
RECOVER statement is followed by a comment line that gives the member name.
User response: Check that the member name is correctly spelled and that it is available in the EQQPRLIB file.
When you have found and corrected the error, edit the JCL and insert a % sign in column 4 of the RECOVER line so
as to reconvert the line into a RECOVER statement. You can initiate a new automatic job recovery attempt for the job
that ended in error by using the ended-in-error list of the Modify Current Plan dialog.

Tivoli OPC Messages and Codes

EQQC028W EQQC045I

EQQC028W NO AUTOMATIC RECOVERY TEST BECAUSE ERROR IN RECOVER STATEMENT
Explanation: While automatic job recovery was checking whether or not recovery should be performed for a job that
ended in error, a RECOVER statement with a syntactical error was found. This message is followed by message
EQQC045I with reason code 50, which identifies the job checked by automatic job recovery.
System action: No recovery attempt is made and the job remains ended in error.
Problem determination: Review the JCL of the identified operation.
User response: Check the RECOVER statements for syntactical errors. Make sure that the operation is separated
from the operands by one or more blanks, and that the operands are separated by a comma. When you have found
and corrected the error, you can initiate a new automatic job recovery attempt for the job that ended in error by using
the ended-in-error list of the Modify Current Plan dialog.
EQQC029I NO AUTOMATIC RECOVERY BECAUSE RECOVER STATEMENT DOES NOT MATCH THIS ERROR
Explanation: While automatic job recovery was checking whether or not recovery should be performed for a job that
ended in error, one or more RECOVER statements were found but none matched the current error. This message is
followed by message EQQC045I with reason code 50, which identifies the job checked by automatic job recovery.
System action: No recovery attempt is made and the job remains ended in error.
User response: Consider if the error should be covered in the recovery scheme.
EQQC044I AUTO RECOVERY OF APPL ADID DATE H.M, OP WSN OP JN JID
Explanation: Automatic job recovery actions have been taken for the specified occurrence (application ADID DATE
H. M, operation WSN OP, where DATE H. M is the occurrence input arrival time). The specified JCL rebuild is made.
Restart, application addition, and release of successors are in process as specified in the RECOVER statement.
System action: The specified automatic recovery actions are started up.
User response: None.
EQQC045I AUTO RECOVERY INFO RS, APPL ADID DATE H.M, OP WSN OP JN JID
Explanation: Automatic job recovery is being performed for the job identified as application ADID DATE H. M,
operation WSN OP, where DATE H. M is the occurrence input arrival time). This message is issued to keep track of
a particular action taken during the recovery processing.

Chapter 4. EQQCnnn Messages

EQQC046W EQQC047E

EQQC046W AUTO RECOVERY WARNING RS, APPL ADID DATE H.M, OP WSN OP JN JID
Explanation: Automatic job recovery was attempted for the job identified as application ADID DATE H. M, operation
WSN OP, where DATE H. M is the occurrence input arrival time. A problem was encountered that inhibited automatic
job recovery.

RS is a reason code that stands for a certain error or action, or both, related to automatic job recovery. Message
EQQC047E has a list of the reason codes and their meanings.
System action: The operation is left unchanged by automatic job recovery.
Problem determination: Review the JCL of the identified operation. Identify the recovery actions described in the
RECOVER statement of the JCL.
User response: Look up the meaning of reason code RS in the list given in message EQQC047E. Review what
recovery actions are taken and see if they match the actions requested in the RECOVER statement. If necessary,
use the Modify Current Plan dialog to perform the rest of the recovery actions.
EQQC047E AUTO RECOVERY ERROR RS, APPL ADID DATE H.M, OP WSN OP JN JID
Explanation: Automatic job recovery was attempted for the job identified as application ADID DATE H. M, operation
WSN OP, where DATE H. M is the occurrence input arrival time. An error was encountered that inhibited the
recovery actions.

RS is a reason code that stands for a certain error or action, or both, related to automatic job recovery (see Problem
determination).
System action: The job remains ended in error and the extended status of the operation is set to E. The JCL
record on the JCL repository dataset might have been updated with information about the error.
Problem determination: The following reason codes (RS) indicate the errors or actions, or both, related to automatic
job recovery:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30

Misplaced Tivoli OPC recover statement.
Incorrect parameter.
Unbalanced parentheses.
Invalid continuation line.
Invalid length of parameter value.
A parameter appears twice in same recover statement.
Invalid return code from exit.
Terminate return code from exit.
Abandon return code from exit.
Invalid restart parameter value. Set Y, YES, N, or NO.
Procedure library member not found.
I/O error.
Unable to load exit routine.
No job statement found.
Incorrect job statement. Cannot add restart parameter.
Invalid specification of generic code.
Loop in the case code lists.
Checkpoint name contains special characters.
Missing stepname.
Too many values specified in parameter.
Failing OP is outside rerun or successor tree.
External successor in rerun tree is not in the failing tree.
Inconsistency with AD of failing occurrence (for example, AD no longer exists or is not active).
AD of application to add could not be found.
Error while using MCP (additional message by MCP).
Unable to allocate virtual storage.
Error detected and handled by other subtask.
Improper naming of steps, give all unique names.
Cannot add restart param. because no delimiter last job line.
No information about error in job name table (JNT).

Tivoli OPC Messages and Codes

EQQC048W EQQC049E

31
32
33
34
35
36
37
38
39
40
41
42

43
44
45
46
47
48
50
51
52

Failing operation record could not be read.
Invalid stepname or no step with that name.
More than one step in JS record with the given name.
JS dataset in use. Recovery test canceled.
JS dataset member in use. Recovery test canceled.
OP record has been changed. Recovery test canceled.
Invalid range.
No occurrence exists for the specified application.
Recovery actions taken.
No JS record.
Restart step not present in the JCL.
Step end entries missing in JNT record (CPLREC04). The error can relate to:
Nested procedures
JCL INCLUDE statements
JCL IF/THEN/ELSE/ENDIF statement constructs.
These JCL statements are restricted by automatic job recovery when used in conjunction with the ERRSTEP,
RESSTEP, or STEPCODE parameters of the RECOVER statement.
Parameter not supported when STEPEVENTS(ABEND) specified.
RESSTEP=% specified but error not related to a step.
A required service function (NMM) has terminated.
No free input arrival time for the application to add.
Missing value for parameter.
Authorization check requires user ID.
Adding identification data to messages in ARTOP.
Error in ALTWS parameter.
Error in ALTJOB parameter.

User response: Check the RECOVER statements. Comment lines that describe the error in detail are added to the
JCL. When you have found and corrected the error, you can use the ended-in-error list of the Modify Current Plan
dialog to initiate a new automatic job recovery attempt.
EQQC048W AUTO RECOVERY WARNING RS
Explanation: Automatic job recovery was attempted for the job that ended in error, but was inhibited because of a
problem with reason code RS. This message differs from EQQC046W in that automatic job recovery was not able to
identify the application to be handled.
System action: No recovery is made and the job remains ended in error.
Problem determination: Message EQQC047E has a list of the reason codes and their meanings. Review the JCL
of the identified operation. Identify the recovery actions described in the RECOVER statement of the JCL.
User response: Look up the meaning of reason code RS in the list given in message EQQC047E. Review what
recovery actions are taken and see if they match the actions requested in the RECOVER statement. If necessary,
use the Modify Current Plan dialog to perform the rest of the recovery actions.
EQQC049E AUTO RECOVERY ERROR RS
Explanation: Automatic job recovery was attempted for the job that ended in error, but was inhibited because of an
error with reason code RS. This message differs from EQQC047E in that automatic job recovery was not able to
identify the application to be handled.
System action: No recovery is made and the job remains ended in error. The extended status of the operation is
set to E.
Problem determination: Message EQQC047E has a list of the reason codes and their meanings. The JS record
may have been updated with information about the error. Review the JCL of the identified operation. Identify the
recovery actions described in the RECOVER statement of the JCL.
User response: Look up the meaning of reason code RS in the list given in message EQQC047E. Review what
recovery actions are taken and see if they match the actions requested in the RECOVER statement. If necessary,
use the Modify Current Plan dialog to perform the rest of the recovery actions.

Chapter 4. EQQCnnn Messages

EQQC061E EQQC500E

EQQC061E AUTOMATIC RECOVERY FAILED, I/O ERROR
Explanation: Automatic job recovery failed for the job that ended in error because an I/O error occurred. The I/O
error occurred while the automatic job recovery subtask was determining whether recovery should be performed, or
while the recovery actions were being activated or implemented.
This message is preceded by a message that describes the I/O error in more detail, and is followed by message
EQQC045I with reason code 50, which identifies the job handled by automatic job recovery.
System action: The job remains ended in error. Some of the intended recovery actions may have been started up
or completed.
Problem determination: Review the JCL of the identified operation. Identify the recovery actions described in the
RECOVER statement of the JCL.
User response: When you have found and corrected the error, you can initiate a new automatic job recovery
attempt for the job that ended in error by using the ended-in-error list of the Modify Current Plan dialog. You may
have to initiate the recovery actions manually, or you may have to change the RECOVER statement to encompass
only the remaining recovery actions.
System programmer response: Review the Tivoli OPC message log for I/O errors that immediately precede this
message.
EQQC062E AUTOMATIC RECOVERY FAILED, NOT ENOUGH VIRTUAL STORAGE - SIZE
Explanation: Automatic job recovery failed for the job that ended in error because of insufficient virtual storage. The
failure occurred while the automatic job recovery subtask was determining whether recovery should be performed, or
while the recovery actions were being activated or implemented. SIZE is the amount of virtual storage requested.
This message is followed by message EQQC045I with reason code 50, which identifies the job checked by automatic
job recovery.
System action: The job remains ended in error. Some of the intended recovery actions may have been started up
or completed.
Problem determination: Review the JCL of the identified operation. Identify the recovery actions described in the
RECOVER statement.
User response: When you have found and corrected the error, you can initiate a new automatic job recovery
attempt for the job that ended in error by using the ended-in-error list of the Modify Current Plan dialog. You may
have to initiate the recovery actions manually, or you may have to change the RECOVER statement to encompass
only the remaining recovery actions.
System programmer response: Stop Tivoli OPC and restart it in a larger region.
EQQC500E THE JCL LIBRARY, DDNAME EQQPRLIB, COULD NOT BE OPENED
Explanation: Automatic job recovery could not open the JCL procedure library (ddname EQQPRLIB) to read a
procedure specified in the ADDPROC parameter of the RECOVER statement. This message is followed by message
EQQC045I with reason code 50, which identifies the job checked by automatic job recovery.
System action: No recovery attempt is made and the job remains ended in error.
Problem determination: Review the earlier messages in the Tivoli OPC message log for a message describing an
I/O error on the EQQPRLIB file.
User response: Contact your system programmer. When your system programmer has fixed the problem, you can
initiate a new automatic job recovery attempt for the job that ended in error by using the ended-in-error list of the
Modify Current Plan dialog.
System programmer response: Check that the ddname EQQPRLIB is correctly specified and that the task started
by Tivoli OPC is authorized to open the dataset for input. When the error is corrected, stop Tivoli OPC and restart it.

Tivoli OPC Messages and Codes

EQQC501E EQQC501E

EQQC501E LOGICAL RECORD LENGTH FOR THE JCL LIBRARY, DDNAME EQQPRLIB, IS NOT VALID
Explanation: Automatic job recovery could not read a procedure specified in the ADDPROC parameter of the
RECOVER statement because the logical record length is not 80 bytes. This message is followed by message
EQQC045I with reason code 50, which identifies the job checked by automatic job recovery.
System action: No recovery attempt is made and the job remains ended in error.
Problem determination: Check the definition of the ddname EQQPRLIB.
User response: Contact your system programmer. When your system programmer has fixed the problem, you can
initiate a new automatic job recovery attempt for the job that ended in error by using the ended-in-error list of the
Modify Current Plan dialog.
System programmer response: Check that the ddname EQQPRLIB is correctly defined. When the error is
corrected, stop Tivoli OPC and restart it.

Chapter 4. EQQCnnn Messages

Tivoli OPC Messages and Codes

EQQCL00I EQQCL08I

Chapter 5. EQQCLnnn Messages
EQQCL00I PROCESSING: INSTRUCTION
Explanation: OCL is processing the INSTRUCTION instruction
System action: OPC processing continues.
User response: None.
EQQCL02 X INSTR INSTRUCTION EXECUTED: RC=RETURN_CODE
Explanation: This message reports the return code (RETURN_CODE) of the instruction. X can be one of the
following:
I
W
E

Information (RC=0)
Warning (RC=4)
Error (RC=8)

System action: OPC processing continues.
User response: None.
EQQCL03I TRUE CONDITION: IF EXPRESSION
Explanation: An IF instruction was specified. OCL processed the instruction specified in the THEN clause.
System action: OPC processing continues.
User response: None.
EQQCL04I TRUE CONDITION: ELSE EXPRESSION
Explanation: An IF instruction was specified. OCL processed the instruction specified in the ELSE clause.
System action: OPC processing continues.
User response: None.
EQQCL05I FALSE CONDITION: IF EXPRESSION
Explanation: The condition specified in the IF instruction is false.
System action: OPC processing continues.
User response: Verify that the specified keywords are correct.
EQQCL06I THE DEFAULT VALUE OF VARIABLE VARNAME WAS UPDATED
Explanation: An UPD or SETUPD instruction was specified. The default value of the variable VARNAME was
updated in the OPC variable table specified by the INIT instruction.
System action: OPC processing continues.
User response: None.
EQQCL08I OCCURRENCE APPL WAS COMPLETED
Explanation: OCL processed a COMPL instruction that completed the occurrence APPL.
System action: OPC processing continues.
User response: None.

 Copyright IBM Corp. 1991, 1999

EQQCL09I EQQCL0GI

EQQCL09I THE OPERATION WAS COMPLETED: OPNO(OPNUM) APPL(APPL) IA(IADT)
Explanation: OCL completed the operation OPNUM within the occurrence APPL with the input arrival date and time
IADT.
System action: OPC processing continues.
User response: None.
EQQCL0AI THE OCCURRENCE WAS ADDED: APPL(APPL) IA(IADT)
Explanation: OCL added a new occurrence in the OPC current plan or long term plan. APPL is the occurrence ID
and IADT is the input arrival date and time.
System action: OPC processing continues.
User response: None.
EQQCL0BI A DELETE REQUEST WAS EXECUTED FOR APPLICATION APPL
Explanation: OCL tried to add a new occurrence in the OPC plan, but a problem occurred, so it issued a DELETE
request for the application APPL.
System action: OPC processing continues.
User response: None.
EQQCL0CI DEFAULT PREDECESSOR OPERATION IS USED: DEFPREOPNO
Explanation: OCL defined DEFPREOPNO as an external predecessor of the operation to be modified.
System action: OPC processing continues.
User response: None.
EQQCL0DI INTERNAL PREDECESSOR PREOPNUM DEFINED TO OPERATION OPNUM
Explanation: A new internal predecessor was defined for operation OPNUM.
System action: OPC processing continues.
User response: None.
EQQCL0EI APPL BELONGS TO GROUP APPLGRP
Explanation: Application APPL is associated to the application group APPLGRP.
System action: OPC processing continues.
User response: None.
EQQCL0FI THE OCCURRENCE WAS DELETED: APPL(APPL) IA(IADT)
Explanation: The occurrence APPL was deleted from the OPC current plan.
System action: OPC processing continues.
User response: None.
EQQCL0GI THE OPERATION WAS DELETED: OPNO(OPNUM) APPL(APPL) IA(IADT)
Explanation: The operation OPNUM was deleted from the occurrence APPL with the input arrival date and time
IADT.
System action: OPC processing continues.
User response: None.

Tivoli OPC Messages and Codes

EQQCL0HI EQQCL0OI

EQQCL0HI OCCURRENCE FOUND IN LTP: APPL(APPL) IA(IADT)
Explanation: OCL found an occurrence in the long term plan (LTP) that matches
with the specified selection parameters.
System action: OPC processing continues.
User response: None.
EQQCL0II DATE IS VALID
Explanation: The input date is valid.
System action: OCL calculates about 210 variables, based on the input date.
User response: None.
EQQCL0JI SEARCHING FOR OCCURRENCE APPL IN CP
Explanation: OCL is searching the occurrence APPL in the OPC current plan (CP).
System action: OPC processing continues.
User response: None.
EQQCL0KI TOTAL NUMBER OF MATCHING OCCURRENCES: N_OCC
Explanation: OCL found N_OCC occurrences in the OPC current plan that match the specified selection
parameters.
System action: OPC processing continues.
User response: None.
EQQCL0LI OPER. IN ERROR: OPNUM APPL(APPL) IA(IADT) WS(WSNAME) ERR(ERR_CODE)
Explanation: OCL found an ended-in-error operation with error code ERR_CODE.
System action: OPC processing continues.
User response: None.
EQQCL0MI ERROR CODE ERR_CODE MATCHES ERR() FOR OPERATION OPNUM
Explanation: This “output” message reports all the operations whose error code matches the value that the user
specified in the ERR() parameter.
System action: OPC processing continues.
User response: None.
EQQCL0NI REPLY TO WTOR WAS ISSUED
Explanation: An operator replied to the WTO issued by OCL.
System action: OPC processing continues.
User response: None.
EQQCL0OI OCCURRENCE FOUND: APPL(APPL) IA(IADT) STATUS(STATUS)
Explanation: OCL found an occurrence in the current plan that matches the selection parameters.
System action: OPC processing continues.
User response: None.

Chapter 5. EQQCLnnn Messages

EQQCL0PI EQQCL0WI

EQQCL0PI CMD COMMAND WAS ISSUED
Explanation: OCL issued command CMD, which can be SRSTAT, OPSTAT, or WSSTAT.
System action: OPC processing continues.
User response: None.
EQQCL0QI OPERATION OPNUM WAS SUCCESSFULLY MODIFIED
Explanation: OCL modified the operation OPNUM.
System action: OPC processing continues.
User response: None.
EQQCL0RI DELETING THE SPECIAL RESOURCE FROM OPERATION OPNUM
Explanation: OCL is deleting the special resource definition from operation OPNUM.
System action: OPC processing continues.
User response: None.
EQQCL0SI DELETING THE EXTERNAL PREDECESSOR(S) FROM OPERATION OPNUM
Explanation: OCL is deleting the external predecessors from operation OPNUM.
System action: OPC processing continues.
User response: None.
EQQCL0TI OPERATION STATUS WAS CHANGED TO 'R': OPNO(opnum)
Explanation: OCL modified the status of operation OPNUM.
System action: OPC processing continues.
User response: None.
EQQCL0UI EXTERNAL PREDECESSOR(S) WILL BE DELETED FROM OPERATION opnum
Explanation: OCL deletes all the external predecessors from operation OPNUM.
System action: OPC processing continues.
User response: None.
EQQCL0VI OCCURRENCE APPL IS NOW STARTED
Explanation: OCL forced the occurrence appl to start.
System action: OPC processing continues.
User response: None.
EQQCL0WI JOBNAME WAS CHANGED FOR OPERATION OPNUM
Explanation: OCL changed the jobname for operation OPNUM.
System action: OPC processing continues.
User response: None.

Tivoli OPC Messages and Codes

EQQCL0XI EQQCL14I

EQQCL0XI DEFAULT OPERATION NUMBER IS USED: DEFOPNO
Explanation: OCL uses DEFOPNO as the default operation number.
System action: OPC processing continues.
User response: None.
EQQCL0YI PREDECESSOR ADDED TO OPERATION OPNUM: PREOPNO(PREOPNUM) PREAPPL(PREAPPL)
Explanation: OCL added a new predecessor to operation OPNUM. PREOPNUM is the predecessor operation, and
PREAPPL is the predecessor application ID.
System action: OPC processing continues.
User response: None.
EQQCL0ZI NEW DEPENDENCY CREATED FOR OCCURRENCE APPL: PREAPPL(PREAPPL)
Explanation: OCL added a new predecessor to operation OPNUM. PREAPPL is the predecessor application ID.
System action: OPC processing continues.
User response: None.
EQQCL10I PREDECESSOR DELETED: PREOPNO(PREOPNUM) PREAPPL(PREAPPL) PREIA(IADT)
Explanation: OCL deleted a predecessor definition. PREOPNUM is the predecessor operation number, PREAPPL
is the occurrence ID, and IADT is the input arrival date and time.
System action: OPC processing continues.
User response: None.
EQQCL11I SPECIAL RESOURCE ADDED TO OPERATION OPNUM: RES_NAME
Explanation: OCL added a new special resource definition to operation OPNUM. RES_NAME is the name of the
special resource.
System action: OPC processing continues.
User response: None.
EQQCL12I SPECIAL RESOURCE DELETED FROM OPERATION OPNUM: RES_NAME
Explanation: OCL deleted a special resource definition from operation OPNUM RES_NAME is the name of the
special resource.
System action: OPC processing continues.
User response: None.
EQQCL13I SUCCESSOR RELEASED FROM OPERATION OPNUM: OPNO(S_OPNUM) APPL(APPL)
Explanation: OCL deleted a successor dependency definition from operation OPNUM. S_OPNUM is the successor
operation number, and APPL is the successor application ID.
System action: OPC processing continues.
User response: None.
EQQCL14I OPERATION P_OPNUM WAS DEFINED AS AN INTERNAL PREDECESSOR OF OPERATION OPNUM
Explanation: OCL added a new predecessor to operation OPNUM. P_OPNUM is the predecessor operation
number.
System action: OPC processing continues.
User response: None.

Chapter 5. EQQCLnnn Messages

EQQCL15I EQQCL1CI

EQQCL15I INTERNAL SUCCESSOR RELEASED: OPNO(S_OPNUM) APPL(APPL)
Explanation: OCL released the internal successor operation number S_OPNUM in the occurrence APPL.
System action: OPC processing continues.
User response: None.
EQQCL16I EXTERNAL SUCCESSOR FOUND FOR OPERATION OPNUM: OPNO(S_OPNUM) APPL(APPL)
Explanation: OCL found an external successor for operation OPNUM. S_OPNUM is the successor operation
number; APPL is the successor occurrence ID.
System action: OPC processing continues.
User response: None.
EQQCL17I INTERNAL SUCCESSOR FOUND FOR OPERATION OPNUM: OPNO(S_OPNUM)
Explanation: OCL found an internal successor for operation OPNUM. S_OPNUM is the successor operation
number.
System action: OPC processing continues.
User response: None.
EQQCL18I EXTERNAL PREDECESSOR FOUND: PREAPPL(APPL) PREIA(IADT)
Explanation: OCL found an external predecessor. APPL is the predecessor occurrence ID, and IADT is its input
arrival date and time.
System action: OPC processing continues.
User response: None.
EQQCL19I EXTERNAL PREDECESSOR FOUND: PREOPNO(OPNUM) PREAPPL(APPL) PREIA(IADT)
Explanation: OCL found an external predecessor. OPNUM is the predecessor operation number, APPL is the
predecessor occurrence ID and IADT is its input arrival date and time.
System action: OPC processing continues.
User response: None.
EQQCL1AI N_OCC OCCURRENCES FOUND FOR APPLICATION APPL
Explanation: OCL found N_OCC occurrences of application APPL in the current plan.
System action: OPC processing continues.
User response: None.
EQQCL1BI OPERATION OPNUM WAS ADDED TO OCCURRENCE APPL WITH IA IADT
Explanation: OCL added operation OPNUM to occurrence APPL.
System action: OPC processing continues.
User response: None.
EQQCL1CI NUMBER OF NOT COMPLETED OCCURRENCES: N_OCC
Explanation: OCL found N_OCC occurrences that are not in Complete status.
System action: OPC processing continues.
User response: None.

Tivoli OPC Messages and Codes

EQQCL1DI EQQCL44W

EQQCL1DI EXTERNAL PREDECESSOR DELETED: PREAPPL(PREAPPL) PREIA(IADT)
Explanation: OCL deleted an external predecessor definition. PREAPPL is the predecessor occurrence ID, and
IADT its input arrival date and time.
System action: OPC processing continues.
User response: None.
EQQCL1EI SPECIAL RESOURCE FOUND FOR OPERATION OPNUM: RES_NAME
Explanation: OCL found a special resource defined to operation OPNUM. RES_NAME is the name of the special
resource.
System action: OPC processing continues.
User response: None.
EQQCL40W THE ROUTINE RETURNED RESULT RETURN CODE
Explanation: The value of RESULT is the return code of the routine. This message is issued when the return code
is not zero.
System action: If the return code issued by the called routine is higher than the highest return code of the other
processed OCL instructions, it is assumed as the highest return code.
OCL processing continues.
User response: None.
EQQCL41W PROCESS TERMINATED DUE TO A LABEL INSTRUCTION - HIGHEST RC=LASTRC
Explanation: OCL processed a LABEL instruction.
System action: OCL processing is terminated with the highest return code of the processed OCL instructions.
User response: None.
EQQCL42W VARIABLE VARNAME WILL BE ADDED TO THE VARIABLE TABLE VARTAB
Explanation: OCL processed an UPD or SETUPD instruction to modify the value of a variable that does not exist in
the OPC variable table.
System action: OCL adds the variable VARNAME to the variable table VARTAB. OCL processing continues.
User response: Verify that the variable name specified in the UPD or SETUPD instruction is correct.
EQQCL43W NO OCCURRENCE TO COMPLETE: APPL
Explanation: OCL processed a COMPL instruction for an application occurrence, but no occurrence in a
noncomplete status was found in the current plan.
System action: OCL processing continues.
User response: Verify that the selection parameters for the application occurrence are correct.
EQQCL44W OCCURRENCE NOT FOUND IN THE CURRENT PLAN: APPL(APPL) IA(IADT)
Explanation: OCL attempted to modify or list the application occurrence APPL, which does not exist in the current
plan. IADT is the input arrival date and time used to search for the occurrence.
System action: OCL processing continues.
User response: Verify that the selection parameters are correct.

Chapter 5. EQQCLnnn Messages

EQQCL45W EQQCL4CW

EQQCL45W OCCURRENCE NOT FOUND IN THE LTP: APPL(APPL) IA(IADT)
Explanation: OCL attempted to modify or list the application occurrence APPL, which does not exist in the long term
plan (LTP). IADT is the input arrival date and time used to search for the occurrence.
System action: OCL processing continues.
User response: Verify that the selection parameters are correct.
EQQCL46W ONLY OCL INSTRUCTIONS ARE ACCEPTED: SYSIN_LINE
Explanation: A non-OCL instructions was specified and the initialization parameter TSOCMD is set to NO.
System action: OCL processing continues.
User response: If you want to be able to specify TSO commands or REXX instructions other than those of OCL, set
the TSOCMD parameter to YES.
EQQCL47W OPER. NOT FOUND OR NOT IN ERROR: OPNUM APPL(APPL) IA(IADT)
Explanation: The application occurrences APPL with input arrival date and time IADT does not contain the selected
operation or the selected operation is not in error status.
System action: OCL processing continues.
User response: Verify that the selected operation really exists in the application occurrence.
EQQCL48W ERROR CODE ERRCODE DOES NOT MATCH ERRCODE() FOR OPERATION OPNUM
Explanation: ERRCODE is the error code specified in the CHKAPPL instruction for operation OPNUM. OCL found
the operation OPNUM in error status, but its error code does not match ERRCODE.
System action: OCL processing continues.
User response: None.
EQQCL49W OPERATION OPNUM IS NOT IN HOLD STATUS
Explanation: OCL tried to release an operation that was not manually held.
System action: OCL processing continues.
User response: None.
EQQCL4AW OPERATION OPNUM IS ALREADY IN HOLD STATUS
Explanation: OCL tried to hold an operation that was already in HOLD status.
System action: OCL processing continues.
User response: None.
EQQCL4BW OPERATION OPNUM IS NOT IN NOP STATUS
Explanation: OCL issued an UNNOP command against an operation that was not in NOP status.
System action: OCL processing continues.
User response: None.
EQQCL4CW OPERATION OPNUM IS ALREADY IN NOP STATUS
Explanation: OCL issued a NOP command against an operation that was already in NOP status.
System action: OCL processing continues.
User response: None.

Tivoli OPC Messages and Codes

EQQCL4DW EQQCL4JW

EQQCL4DW EXTERNAL PREDECESSOR(S) FOUND, STATUS CANNOT BE CHANGED
Explanation: OCL tried to set an operation to Ready status, but external predecessors are defined. OCL deletes the
dependency definitions and tries to set the operation Ready again.
System action: OCL processing continues.
User response: None.
EQQCL4EW OCCURRENCE APPL IS STILL IN WAITING STATUS
Explanation: OCL tried to force the application occurrence to start, but it is still in Waiting status.
System action: OCL processing continues.
User response: Verify the conditions that cause the occurrence to wait. Check the current operation status and
extended status, using the OPC dialogs, to determine more precisely why the application occurrence failed to start.
EQQCL4FW NO OPERATION FOUND TO BE CHANGED
Explanation: OCL tried to change the jobname associated with an operation in the current plan, but the operation
was not found.
System action: OCL processing continues.
User response: Verify that the selection parameters are correct.
EQQCL4GW PREDECESSOR APPLICATION NOT FOUND IN CP: PREAPPL(PREAPPL) PREIA(PREIADT)
Explanation: PREAPPL is the predecessor application ID and PREIADT is the input arrival date and time of the
predecessor application. OCL tried to define PREAPPL as a predecessor of the application occurrence specified in
the APPL() keyword, but PREAPPL is not present in the current plan.
System action: OCL processing continues.
User response: Verify that the selection parameters are correct.
EQQCL4HW OPERATION OPNUM DOESN'T EXISTS
Explanation: OCL tried to change or delete an operation that does not exist in the current plan.
System action: OCL processing continues.
User response: Verify that the specified keywords are correct.
EQQCL4IW ALREADY PREDECESSOR: PREOPNUM
Explanation: OCL tried to define a predecessor that is already defined.
System action: OCL processing continues.
User response: Verify that the specified keywords are correct.
EQQCL4JW PREDECESSOR NOT FOUND IN THE LTP: PREAPPL(PREAPPL) PREIA(PREIADT)
Explanation: OCL tried to define PREAPPL as a predecessor of the application occurrence specified in the APPL()
keyword, but PREAPPL is not present in the long term plan (LTP).
System action: OCL processing continues.
User response: Verify the selection parameters.

Chapter 5. EQQCLnnn Messages

EQQCL4KW EQQCL4RW

EQQCL4KW NO EXTERNAL SUCCESSOR FOUND FOR THE OCCURRENCE APPL
Explanation: OCL tried to release the external successors of the occurrence APPL, but no successor was found for
the occurrence.
System action: OCL processing continues.
User response: None.
EQQCL4LW OPERATION OPNUM NOT FOUND: APPL(APPL) IA(IADT)
Explanation: OCL tried to change operation OPNUM, which does not exist in the current plan.
System action: OCL processing continues.
User response: Verify the selection parameters.
EQQCL4MW NO INTERNAL SUCCESSOR FOUND FOR OPERATION OPNUM OF THE OCCURRENCE APPL
Explanation: OCL tried to release the internal successors of operation OPNUM, but no successor was found.
System action: OCL processing continues.
User response: Verify the selection parameters.
EQQCL4NW NO EXTERNAL PREDECESSOR FOUND FOR THE OCCURRENCE APPL
Explanation: OCL tried to release the external predecessors of occurrence APPL, but no predecessor is present in
the current plan.
System action: OCL processing continues.
User response: Verify the selection parameters.
EQQCL4OW NO SPECIAL RESOURCE FOUND
Explanation: OCL tried to delete a special resource definition, but no special resource is defined to the operation.
System action: OCL processing continues.
User response: Verify the selection parameters.
EQQCL4PW NO OPERATION WAS MODIFIED
Explanation: OCL did not modify any operation in the occurrence.
System action: OCL processing continues.
User response: Verify the selection parameters.
EQQCL4QW OPERATION OPNUM ALREADY EXISTS
Explanation: OCL tried to add an operation that already exists in the occurrence.
System action: OCL processing continues.
User response: Verify the selection parameters.
EQQCL4RW OPERATION DEADLINE LATER THAN OCCURRENCE DEADLINE - ACCEPTED: DEADLINE
Explanation: The specified operation deadline is later than the occurrence deadline, but is accepted.
System action: OCL processing continues.
User response: Verify that the specified keywords are correct.

Tivoli OPC Messages and Codes

EQQCL4SW EQQCL51E

EQQCL4SW OPERATION DEADLINE PRECEDES OPERATION INPUT ARRIVAL - ACCEPTED: DEADLINE
Explanation: The operation deadline precedes the operation input arrival, but is accepted.
System action: OCL processing continues.
User response: Verify that the specified keywords are correct.
EQQCL4TW OPERATION INPUT ARRIVAL PRECEDES OCCURRENCE - ACCEPTED: IADT
Explanation: The operation input arrival precedes the occurrence input arrival, but is accepted.
System action: OCL processing continues.
User response: Verify that the specified keywords are correct.
EQQCL4UW DEPENDENCY ALREADY DEFINED
Explanation: OCL tried to define a predecessor that is already defined.
System action: OCL processing continues.
User response: Verify that the specified keywords are correct.
EQQCL4VW NO PARAMETER WAS SPECIFIED
Explanation: No parameter was specified for the MODOP instruction. No change is required for the operation.
System action: OCL processing continues.
User response: Verify the selection parameters.
EQQCL4WW OCCURRENCE ALREADY IN COMPLETE STATUS: APPL WITH IA IADT
Explanation: OCL tried to complete an occurrence that was already completed.
System action: OCL processing continues.
User response: Verify the selection parameters.
EQQCL4XW OCCURRENCE NOT FOUND IN THE CURRENT PLAN: APPL(APPL)
Explanation: No occurrence exists in the current plan for application APPL.
System action: OCL processing continues.
User response: Verify the selection parameters.
EQQCL50E NOT POSSIBLE TO READ THE OCL MLIB
Explanation: OCL was not able to read the dataset referenced by the OCLMLIB DD-card.
System action: OCL processing is terminated.
User response: Verify the dataset name specified in the OCLMLIB DD-card.
EQQCL51E NOT POSSIBLE TO READ THE OCL PARMLIB
Explanation: OCL was not able to read the EQQYRPRM member in the OCL library.
System action: OCL processing is terminated.
User response: Verify the dataset name specified in the OCLPARM ddname.

Chapter 5. EQQCLnnn Messages

EQQCL52E EQQCL59E

EQQCL52E NOT POSSIBLE TO READ THE SYSIN CARD
Explanation: OCL was not able to read the SYSIN DD-card.
System action: OCL processing is terminated.
User response: Verify the dataset specified in the EQQOCL.SYSIN DD-card.
EQQCL53E INVALID SYNTAX: INSTRUCTION
Explanation: An invalid instruction was specified in the OCL SYSIN.
System action: OCL terminates
User response: Correct the instruction and resubmit the job.
EQQCL54E NOT POSSIBLE TO WRITE THE CONTROL CARDS FOR PIFTEST PROGRAM
Explanation: OCL was not able to write the input control cards for the PIFTEST program.
System action: OCL terminates
User response: Contact your IBM representative.
EQQCL55E ERROR DURING THE GETMAIN REQUEST
Explanation: OCL was not able to get the storage for the PIF session.
System action: OCL processing is terminated.
User response: Contact your IBM representative.
EQQCL56E PIF INITIALIZATION FAILED FOR SUBSYSTEM SUBSYS
Explanation: OCL was not able to initialize the OPC PIF session.
System action: OCL processing is terminated.
User response: Check the OPC subsystem name specified in the PARMLIB SUBSYS() parameter or in the INIT
instruction. If the subsystem name is correct and if the subsystem is active, contact your IBM representative.
EQQCL57E VARIABLE NAME IS MISSING
Explanation: The variable name was not specified in the UPD or SETUPD instruction.
System action: OCL processing is terminated.
User response: Correct the instruction and resubmit the job
EQQCL58E PIF TERM REQUEST FAILED
Explanation: OCL was not able to terminate the OPC PIF session.
System action: OCL processing is terminated.
User response: Contact your IBM representative.
EQQCL59E PIF TERM REQUEST FAILED: ERROR DURING FREEMAIN
Explanation: OCL was not able to terminate the OPC PIF session.
System action: OCL processing is terminated.
User response: Contact your IBM representative.

Tivoli OPC Messages and Codes

EQQCL5AE EQQCL5HE

EQQCL5AE PREDECESSOR CAN'T BE EQUAL TO THE OPERATION TO BE ADDED
Explanation: OCL was requested to add a new operation in an application occurrence, but the operation number is
equal to its internal predecessor operation number.
System action: OCL processing is terminated.
User response: If you have specified the DEFOPNO initialization parameter, OCL uses it as a default predecessor
operation number. You cannot add an operation with a number equal to DEFOPNO.
EQQCL5BE NO CURRENT PLAN EXISTS
Explanation: OCL cannot add or modify occurrences because the current plan does not exist.
System action: OCL processing is terminated.
User response: Extend the current plan and resubmit the job.
EQQCL5CE NO DEFAULT VALUE FOR VARIABLE VARNAME
Explanation: OCL did not find a value for variable VARNAME.
System action: OCL processing is terminated.
User response: Verify that a SET or SETUPD instruction was specified to set the variable value.
EQQCL5DE INVALID OPERAND FOR THE PIF REQUEST: OPERAND
Explanation: A PIF request contained an invalid operand.
System action: OCL processing is terminated.
User response: Verify that the length of operand is specified in the SETSTEMS subroutine in the OCL program.
EQQCL5EE NOT POSSIBLE TO COMPLETE THE OCCURRENCE APPL WITH IA IADT
Explanation: OCL was not able to complete the occurrence APPL.
System action: OCL processing is terminated.
User response: Contact your IBM representative.
EQQCL5FE NOT POSSIBLE TO MODIFY THE OCCURRENCE APPL WITH IA IADT
Explanation: OCL was not able to modify the occurrence APPL in the current plan.
System action: OCL processing is terminated.
User response: Contact your IBM representative.
EQQCL5GE CANNOT COMPLETE OPERATION OPNUM of occurrence appl with IA IADT
Explanation: OCL was not able to complete the operation OPNUM in the occurrence APPL with input arrival time
IADT.
System action: OCL processing is terminated.
User response: Verify if the operation has external predecessors.
EQQCL5HE REQUIRED KEYWORD(S) MISSING
Explanation: A required keyword was not specified in the instruction.
System action: OCL processing is terminated.
User response: Correct the instruction and resubmit the job.

Chapter 5. EQQCLnnn Messages

EQQCL5IE EQQCL5PE

EQQCL5IE APPL AND GROUP ARE MUTUALLY EXCLUSIVE KEYWORDS
Explanation: APPL and GROUP keywords were specified in the same ADD instruction.
System action: OCL processing is terminated.
User response: Correct the instruction and resubmit the job.
EQQCL5JE OPC SUBSYSTEM ID MUST BE SUPPLIED
Explanation: The OPC subsystem ID was not specified.
System action: OCL processing is terminated.
User response: Specify the subsystem ID in the SUBSYS initialization parameter (EQQYRPRM member in the OCL
library) or in the INIT instruction.
EQQCL5KE NO APPLICATION FOUND FOR THE GROUP APPLGRP
Explanation: OCL tried to add the application group APPLGRP, but no application was defined to the group.
System action: OCL processing is terminated.
User response: Verify the application group ID.
EQQCL5LE NOT POSSIBLE TO ADD THE OCCURRENCE APPL
Explanation: OCL was not able to add the occurrence APPL.
System action: OCL processing is terminated.
User response: Contact your IBM representative.
EQQCL5ME NOT POSSIBLE TO USE AN IA DATE OTHER THAN THE ACTUAL DATE
Explanation: OCL tried to add an occurrence in the current or long term plan. An occurrence with the same input
arrival (IA) already existed, so OCL tried to increment the input arrival time by 1 minute. An error occurs if the
occurrence input arrival time is 23:59.
System action: OCL processing is terminated.
User response: Specify an input arrival time other than 23:59 for the occurrence to be added.
EQQCL5NE NOT POSSIBLE TO ADD THE OCCURRENCE WITH IA IADT
Explanation: OCL was not able to add the occurrence with IA IADT.
System action: OCL processing is terminated.
User response: Verify if the occurrence input arrival date and time is later than the long term plan end time.
EQQCL5OE OPERATION NUMBER MUST BE SPECIFIED
Explanation: The operation number is a required keyword for the instruction.
System action: OCL processing is terminated.
User response: Correct the instruction and resubmit the job.
EQQCL5PE WORKSTATION ID MUST BE SPECIFIED
Explanation: Workstation ID is a required keyword for the instruction.
System action: OCL processing is terminated.
User response: Correct the instruction and resubmit the job.

Tivoli OPC Messages and Codes

EQQCLQE EQQCL5XE

EQQCLQE WORKSTATION WSNAME NOT FOUND IN THE OPC DATABASE
Explanation: Workstation WSNAME is not defined in the OPC Workstation database.
System action: OCL processing is terminated.
User response: Correct the instruction and resubmit the job.
EQQCL5RE JOBNAME MUST BE SPECIFIED FOR WORKSTATION WSNAME
Explanation: Workstation WSNAME requires the jobname (job-setup, computer, or printer)
System action: OCL processing is terminated.
User response: Correct the instruction and resubmit the job.
EQQCL5SE DATE1 AND DATE2 ARE MUTUALLY EXCLUSIVE KEYWORDS
Explanation: You cannot use DATE1 and DATE2 keywords in the same CHKDATE instruction.
System action: OCL processing is terminated.
User response: Correct the instruction and resubmit the job.
EQQCL5TE INTERNAL PREDECESSOR DOESN'T EXIST: PREOPNUM
Explanation: OCL tried to add an internal predecessor that does not exist.
System action: OCL processing is terminated.
User response: Check that the PREOPNUM() keyword refers to an existing operation number. If it does not, correct
the instruction and resubmit the job. If the PREOPNUM() keyword is not specified, OCL uses the default operation
number (initialization parameter DEFOPNO) as the internal predecessor operation. Verify that the application contains
an operation with the number equal to the number specified in the DEFOPNO parameter.
EQQCL5UE INCVALUE VALUE CAN'T BE GREATER THAN 30
Explanation: The value of INCVALUE must be in the range 1–30.
System action: OCL processing is terminated.
User response: Specify a correct INCVALUE and resubmit the job.
EQQCL5VE THE OPERATION INPUT ARRIVAL MUST BE IN THE YYMMDDHHMM FORMAT
Explanation: OCL found an invalid operation input arrival date and time.
System action: OCL processing is terminated.
User response: Correct the instruction and resubmit the job.
EQQCL5WE THE OPERATION DEADLINE MUST BE IN THE YYMMDDHHMM FORMAT
Explanation: OCL found an invalid operation deadline date and time.
System action: OCL processing is terminated.
User response: Correct the instruction and resubmit the job.
EQQCL5XE NOT POSSIBLE TO ADD THE OPERATION OPNUM IN OCCURRENCE APPL
Explanation: OCL tried to insert a new operation in the application occurrence APPL, but a problem occurred.
System action: OCL processing is terminated.
User response: Verify if the operation OPNUM already existed in the occurrence. Refer to the error messages in
the OPC message log.

Chapter 5. EQQCLnnn Messages

EQQCL5YE EQQCL65E

EQQCL5YE NOT POSSIBLE TO DEFINE INTERNAL PRED. PREOPNUM TO OPERATION OPNUM
Explanation: OCL tried to define an internal predecessor to operation OPNUM, but a problem occurred.
System action: OCL processing is terminated.
User response: Contact your IBM representative.
EQQCL5ZE NOT POSSIBLE TO REMOVE THE OCCURRENCE FROM THE APPLICATION GROUP
Explanation: OCL tried to remove an occurrence from the application group before deleting it from the current plan
or from the long term plan, but a problem occurred.
System action: OCL processing is terminated.
User response: Contact your IBM representative.
EQQCL60E NOT POSSIBLE TO DELETE OCCURRENCE APPL WITH IA IADT
Explanation: OCL tried to delete the occurrence APPL, but a problem occurred.
System action: OCL processing is terminated.
User response: Contact your IBM representative.
EQQCL61E NOT POSSIBLE TO DELETE OPERATION OPNUM OF OCCURRENCE APPL
Explanation: OCL tried to delete operation OPNUM from the occurrence APPL, but a problem occurred.
System action: OCL processing is terminated.
User response: Contact your IBM representative.
EQQCL62E DATE MUST BE SUPPLIED
Explanation: A date must be supplied in the CHKDATE instruction.
System action: OCL processing is terminated.
User response: Use the DATE1 or DATE2 keyword according with the format of the date and resubmit the job.
EQQCL63E DATE NOT VALID: DATE LENGTH CANNOT BE > 10
Explanation: An invalid date was specified in the CHKDATE instruction. Valid date formats are YYMMDD,
YY/MM/DD, YYYYMMDD, YYYY/MM/DD, DDMMYY, DD/MM/YY, DDMMYYYY, and DD/MM/YYYY.
System action: OCL processing is terminated.
User response: Correct the date and resubmit the job.
EQQCL64E DATE NOT VALID: DATE LENGTH CANNOT BE < 6
Explanation: An invalid date was specified in the CHKDATE instruction. Valid date formats are YYMMDD,
YY/MM/DD, YYYYMMDD, YYYY/MM/DD, DDMMYY, DD/MM/YY, DDMMYYYY, and DD/MM/YYYY.
System action: OCL processing is terminated.
User response: Correct the date and resubmit the job.
EQQCL65E DATE NOT VALID: FORMAT NOT RECOGNIZED
Explanation: An invalid date was specified in the CHKDATE instruction. Valid date formats are YYMMDD,
YY/MM/DD, YYYYMMDD, YYYY/MM/DD, DDMMYY, DD/MM/YY, DDMMYYYY, and DD/MM/YYYY.
System action: OCL processing is terminated.
User response: Correct the date and resubmit the job.

Tivoli OPC Messages and Codes

EQQCL66E EQQCL6DE

EQQCL66E DATE NOT VALID: IT'S NOT IN THE YYYYMMDD FORMAT
Explanation: The date supplied is not in the YYYYMMDD format.
System action: OCL processing is terminated.
User response: Correct the date and resubmit the job.
EQQCL67E YEAR YEAR MUST BE INCLUDED BETWEEN 1996 AND 2999
Explanation: The date specified in the CHKDATE instruction is outside the valid range 1996–2999.
System action: OCL processing is terminated.
User response: Correct the date and resubmit the job.
EQQCL68E MONTH MONTH MUST BE INCLUDED BETWEEN 01 AND 12
Explanation: The date specified in the CHKDATE instruction is invalid; it is not in the range 01–12.
System action: OCL processing is terminated.
User response: Correct the date and resubmit the job.
EQQCL69E DAY DAY MUST BE INCLUDED BETWEEN 01 AND LAST_DAY
Explanation: The date specified in the CHKDATE instruction is invalid. The value of day DAY must be in the range
01–LAST_DAY. LAST_DAY is the last day of the month specified in the input date.
System action: OCL processing is terminated.
User response: Correct the date and resubmit the job.
EQQCL6AE STATUS INVALID: IT CAN BE: C, E, D, P, S, U OR W
Explanation: An invalid occurrence status was specified in the CHKAPPL instruction.
System action: OCL processing is terminated.
User response: Correct the instruction and resubmit the job.
EQQCL6BE OCCURRENCE NAME CAN'T BE '*'
Explanation: An invalid occurrence ID was specified.
System action: OCL processing is terminated.
User response: Correct the APPL keyword and resubmit the job.
EQQCL6CE ALERT PARAMETER CAN BE YES OR NO
Explanation: An invalid ALERT keyword was specified.
System action: OCL processing is terminated.
User response: Correct the instruction and resubmit the job.
EQQCL6DE USER ID MUST BE SPECIFIED FOR ALERTING
Explanation: The USER keyword is required with ALERT(YES).
System action: OCL processing is terminated.
User response: Correct the instruction and resubmit the job.

Chapter 5. EQQCLnnn Messages

EQQCL6EE EQQCL6LE

EQQCL6EE NOT POSSIBLE TO ISSUE THE WTO
Explanation: OCL tried to invoke the IPOWTO program, but a problem occurred.
System action: OCL processing is terminated.
User response: Make sure that the IPOWTO program is available to OCL and resumbit the job.
EQQCL6FE INVALID CMD COMMAND
Explanation: CMD can be only SRSTAT, OPSTAT, or WSSTAT.
System action: OCL processing is terminated.
User response: Correct the instruction and resubmit the job.
EQQCL6GE VARIABLE TABLE NOT FOUND IN OPC DATABASE
Explanation: The variable table specified in the INIT instruction does not exist in the OPC database.
System action: OCL processing is terminated.
User response: Specify a valid variable table in the INIT instruction and resubmit the job.
EQQCL6HE INTERNAL SUCCESSOR OPERATION NOT FOUND: S_OPNUM
Explanation: OCL tried to release an internal successor, but a problem occurred. S_OPNUM is the successor
operation number.
System action: OCL processing is terminated.
User response: Contact your IBM representative.
EQQCL6IE NOT POSSIBLE TO EXECUTE PIFTEST PROGRAM
Explanation: OCL could not to run the PIFTEST program.
System action: OCL processing is terminated.
User response: Make sure that the PIFTEST load module is available to OCL and resubmit the job.
EQQCL6JE NEW JOBNAME INVALID OR MISSING
Explanation: A valid NEWJOB keyword must be specified in the CHGJOB instruction.
System action: OCL processing is terminated.
User response: Specify a valid NEWJOB keyword and resubmit the job.
EQQCL6KE CANNOT LIST THE WORKSTATIONS
Explanation: OCL tried to list the workstations defined in the OPC Workstation database, but a problem occurred.
System action: OCL processing is terminated.
User response: Contact your IBM representative.
EQQCL6LE NOT POSSIBLE TO MODIFY OPERATION OPNUM OF OCCURRENCE APPL
Explanation: OCL tried to modify operation OPNUM in the occurrence APPL, but a problem occurred.
System action: OCL processing is terminated.
User response: Refer to the messages in the OPC message log and contact your IBM representative.

Tivoli OPC Messages and Codes

EQQCL6ME EQQCL6SE

EQQCL6ME SPECIFY THE OPNO() KEYWORD OR SPECIFY THE DEFAULT OPERATION NUMBER
Explanation: The OPNO keyword is not specified. OCL tried to use the default operation number, which is not
specified in the initialization parameter DEFOPNO.
System action: OCL processing is terminated.
User response: Specify the OPNO keyword or the default operation number in the initialization parameter
DEFOPNO.
EQQCL6NE NOT POSSIBLE TO MODIFY THE OPERATION STATUS: OPNO(OPNUM)
Explanation: OCL tried to modify the status of operation OPNUM, but a problem occurred.
System action: OCL processing is terminated.
User response: Contact your IBM representative.
EQQCL6OE NEW JOBNAME IS BLANK
Explanation: The NEWJOB keyword was not specified in the CHGJOB instruction.
System action: OCL processing is terminated.
User response: Correct the instruction and resubmit the job.
EQQCL6PE NOT POSSIBLE TO CHANGE THE JOBNAME
Explanation: OCL tried to change the jobname of an operation, but a problem occurred.
System action: OCL processing is terminated.
User response: Contact your IBM representative.
EQQCL6QE PREDECESSOR OPERATION NOT FOUND: PREOPNUM
Explanation: OCL tried to add a predecessor that does not exist
System action: OCL processing is terminated.
User response: Verify the PREOPNO keyword or the initialization parameter DEFPREOPNO. Correct the
instruction and resubmit the job.
EQQCL6RE NOT POSSIBLE TO MODIFY THE OPERATION OPNUM
Explanation: OCl tried to modify operation OPNUM, but a problem occurred.
System action: OCL processing is terminated.
User response: Contact your IBM representative.
EQQCL6SE CAN'T DEFINE THE PRED. FOR OPERATION OPNUM: PREOPNO(P_OPNUM) APPL(P_APPL)
Explanation: OCL tried to add a new predecessor to operation OPNUM.

P_OPNUM
P_APPL

The predecessor operation number
The predecessor occurrence ID.

System action: OCL processing is terminated.
User response: Contact your IBM representative.

Chapter 5. EQQCLnnn Messages

EQQCL6TE EQQCL70E

EQQCL6TE CAN'T HAVE A DEPENDENCY ON ITSELF: PREAPPL(P_APPL) PREIA(IADT)
Explanation: In the long term plan, an occurrence cannot have a predecessor with the same occurrence ID and
input arrival date and time.
System action: OCL processing is terminated.
User response: Correct the instruction and resubmit the job.
EQQCL6UE NOT POSSIBLE TO CREATE A NEW DEPENDENCY: PREAPPL(PREAPPL)
Explanation: OCl tried to define a new dependency in an application occurrence in the long term plan, but a problem
occurred.
System action: OCL processing is terminated.
User response: Contact your IBM representative.
EQQCL6VE OPERATION NOT FOUND: OPNUM
Explanation: Operation OPNUM does not exist in the occurrence to be modified.
System action: OCL processing is terminated.
User response: Verify the OPNO keyword or the default operation number in the initialization parameter DEFOPNO.
Correct the instruction and resubmit the job.
EQQCL6WE NOT POSSIBLE TO DELETE THE DEPENDENCY DEFINITION
Explanation: OCL tried to delete a predecessor, but a problem occurred.
System action: OCL processing is terminated.
User response: Contact your IBM representative.
EQQCL6XE SPECIAL RESOURCE NAME MUST BE SUPPLIED
Explanation: RESNAME is a required keyword.
System action: OCL processing is terminated.
User response: Correct the instruction and resubmit the job.
EQQCL6YE SPECIAL RESOURCE USAGE MUST BE SUPPLIED
Explanation: RESUSAGE is a required keyword.
System action: OCL processing is terminated.
User response: Correct the instruction and resubmit the job.
EQQCL6ZE ONERROR ACTION CAN BE Y OR N
Explanation: An invalid ONERROR keyword was specified.
System action: OCL processing is terminated.
User response: Correct the instruction and resubmit the job.
EQQCL70E NOT POSSIBLE TO ADD THE SPECIAL RESOURCE: RESNAME(RES_NAME)
Explanation: OCL tried to add the special resource RES_NAME, but a problem occurred.
System action: OCL processing is terminated.
User response: Refer to the messages in the OPC message log and contact your IBM representative.

Tivoli OPC Messages and Codes

EQQCL71E EQQCL78E

EQQCL71E OPNO() AND EXCLOP() ARE MUTUALLY EXCLUSIVE KEYWORDS
Explanation: OPNO and EXCLOP are mutually exclusive keywords.
System action: OCL processing is terminated.
User response: Correct the instruction and resubmit the job.
EQQCL72E CAN'T RELEASE THE SUCCESSOR OF OPERATION OPNUM: APPL(S_APPL) OPNO(S_OPNUM)
Explanation: OCL tried to release an external successor of operation OPNUM, but a problem occurred.
System action: OCL processing is terminated.
User response: Correct the instruction and resubmit the job.
EQQCL73E YOU CAN SPECIFY ONLY ONE OPERATION NUMBER
Explanation: Only one operation number is accepted in the OPNO keyword.
System action: OCL processing is terminated.
User response: Correct the instruction and resubmit the job.
EQQCL74E DEFAULT OPERATION NUMBER IS NOT SPECIFIED (DEFOPNO PARAMETER)
Explanation: OCL is trying to release an internal successor. OCL would use the default operation number as an
internal predecessor of this operation, but the default operation number was not specified in the DEFOPNO parameter
of the OCL PARMLIB.
System action: OCL processing is terminated.
User response: Specify the DEFOPNO parameter in the OCL PARMLIB.
EQQCL75E OPNO() CANNOT BE EQUAL TO DEFOPNO INITIALIZATION PARAMETER: OPNUM
Explanation: OCL is trying to release an internal successor of operation OPNUM. It would use the default operation
number as an internal predecessor of this operation, but the value of OPNO must not be the same as the default
operation number.
System action: OCL processing is terminated.
User response: Correct the instruction and resubmit the job.
EQQCL76E REQUIRED KEYWORD(S) MISSING. SPECIFY THE INIT INSTRUCTION
Explanation: The variable table or the OPC subsystem name was not supplied.
System action: OCL processing is terminated.
User response: Specify the INIT instruction before the UPD or SETUPD instructions and resubmit the job.
EQQCL77E CAN'T DEFINE THE DEFAULT OPERATION NUMBER OPNUM AS A PREDECESSOR OF S_OPNUM
Explanation: OCL tried to add the default operation number OPNUM as a predecessor of S_OPNUM. S_OPNUM is
the internal successor to be released by the RELOP instruction.
System action: OCL processing is terminated.
User response: Correct the instruction and resubmit the job.
EQQCL78E CAN'T RELEASE THE SUCCESSOR OPERATION: S_OPNUM
Explanation: OCL tried to release an internal successor, but a problem occurred.
System action: OCL processing is terminated.
User response: Contact your IBM representative.

Chapter 5. EQQCLnnn Messages

EQQCL79E EQQCL7GE

EQQCL79E CAN'T DELETE THE SPECIAL RESOURCE: RES_NAME OPNO(OPNUM)
Explanation: OCL tried to delete the special resource RES_NAME from the operation OPNUM.
System action: OCL processing is terminated.
User response: Contact your IBM representative.
EQQCL7AE OCCURRENCE ID MUST BE SUPPLIED
Explanation: APPL is a required keyword.
System action: OCL processing is terminated.
User response: Correct the instruction and resubmit the job.
EQQCL7BE OPC CALENDAR NOT FOUND: CAL
Explanation: The calendar CAL was not found in the OPC Calendar database.
System action: OCL processing is terminated.
User response: Correct the instruction anden resubmit the job.
EQQCL7CE SPECIFY THE PREOPNO() KEYWORD OR THE DEFAULT OPERATION NUMBER
Explanation: OCL is adding a new operation in an application occurrence. It tried to define the internal predecessor
of this operation, but either the PREOPNO keyword or the default operation number was not specified.
System action: OCL processing is terminated.
User response: Specify the PREOPNO keyword or the default operation number in the OCL PARMLIB.
EQQCL7DE DATE IS BLANK
Explanation: OCL tried to determine whether an input date corresponds to a free day, but the date is blank.
System action: OCL processing is terminated.
User response: Contact your IBM representative.
EQQCL7EE VALID VALUES FOR OPCVER ARE 1 AND 2
Explanation: The initialization parameter OPCVER is not either 1 or 2.
System action: OCL processing is terminated.
User response: Correct the parameter and resubmit the job.
EQQCL7FE NOT POSSIBLE TO ALLOCATE DATASET: DSNAME(WTOIN)
Explanation: OCL tried to allocate the member WTOIN in the dataset DSNAME, but a problem occurred.
System action: OCL processing is terminated.
User response: Contact your IBM representative.
EQQCL7GE VALID VALUES FOR TSOCMD PARAMETER ARE YES AND NO
Explanation: The initialization parameter TSOCMD is not either YES or NO.
System action: OCL processing is terminated.
User response: Correct the parameter and resubmit the job.

Tivoli OPC Messages and Codes

EQQCL7HE EQQCL7KE

EQQCL7HE NOT POSSIBLE TO WRITE THE MESSAGE ON DATASET: DSNAME(WTOIN)
Explanation: OCL tried to write the message text of the WTOR in the member WTOIN of dataset DSNAME, but a
problem occurred.
System action: OCL processing is terminated.
User response: Contact your IBM representative.
EQQCL7IE INVALID PARAMETER: PARAMETER
Explanation: An invalid parameter was specified in the MODOP instruction.
System action: OCL processing is terminated.
User response: Correct the instruction and resubmit the job.
EQQCL7JE NOT POSSIBLE TO MODIFY THE OCCURRENCE APPL
Explanation: OCL tried to modify the occurrence APPL, but a problem occurred.
System action: OCL processing is terminated.
User response: Contact your IBM representative.
EQQCL7KE CAN'T UPDATE THE LOG DATASET
Explanation: OCL tried to write a new record in the log dataset, but a problem occurred.
System action: OCL processing is terminated.
User response: Contact your IBM representative.

Chapter 5. EQQCLnnn Messages

Tivoli OPC Messages and Codes

EQQD000E EQQD010E

Chapter 6. EQQDnnn Messages
| EQQD000E YOU DO NOT HAVE AUTHORITY TO ACCESS THE CURRENT PLAN DATA SET
| Explanation: None.
EQQD001E INVALID VALUE SPECIFIED FOR REPORT SELECTION
Explanation: Data entry error; see “Data Entry Errors” on page 2.
If you want a report, you must specify a Y. If you do not want a report, you must specify an N.
EQQD002E START AND END DATES MUST NOT BE THE SAME
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQD003I ENTER END AGAIN TO EXIT, OR PRESS ENTER TO PRINT
Explanation: You can either cancel the print request and leave this panel by entering END again or print the
specified reports by pressing ENTER.
System action: The system waits for you to respond.
User response: Enter END or press ENTER.
EQQD004E END TIME MUST BE LATER THAN START TIME
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQD005E END DATE MUST BE LATER THAN START DATE
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQD006E THE END TIME MUST BE A VALUE 00.01 TO 24.00
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQD007E SPECIFY A (ALL DAYS) OR W (WORKDAYS ONLY)
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQD008E THE EXTENSION TIME SPECIFIED MAY NOT BE > 21 DAYS OR 504 HOURS
Explanation: The extension time that you specified is greater than 21 days (504 hours), the maximum allowed
extension time.
System action: The system waits for you to respond.
User response: Enter a valid extension time.
EQQD009E A MINUTE VALUE GREATER THAN 60 IS NOT ALLOWED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQD010E EXTENSION TIME MUST BE IN THE FORM HHHMM
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The valid extension time format is HHHMM, where HHH is 000 through 504 and MM is 00 through 59.

 Copyright IBM Corp. 1991, 1999

EQQD011E EQQD020E

EQQD011E SPECIFY EITHER EXTENSION OR END DATE AND TIME
Explanation: Data entry error; see “Data Entry Errors” on page 2.
To extend a plan period, you must specify either an extension length or an end date and time, but not both.
EQQD012E END DATE OR EXTENSION LENGTH MUST BE FILLED IN
Explanation: Data entry error; see “Data Entry Errors” on page 2.
To extend a plan period, you must specify either an end date and time or an extension length.
EQQD013E A START DATE MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
You must specify a start date because no current plan exists.
EQQD014E A CURRENT PLAN ALREADY EXISTS FOR THE SPECIFIED PERIOD
Explanation: You specified a start date and time for a current plan when a current plan already exists.
System action: The system waits for you to respond.
User response: Blank out the start date and time and enter a valid extension length.
EQQD015E NO CURRENT PLAN EXISTS, SPECIFY START DATE AND TIME
Explanation: Data entry error; see “Data Entry Errors” on page 2.
To create a current plan, you must specify a start date and time.
EQQD016E NO CURRENT PLAN EXISTS, FUNCTION CANNOT BE USED
Explanation: You have attempted to use a function that requires the existence of a current plan.
System action: The system waits for you to respond.
User response: Check why a current plan does not exist.
EQQD017E SPECIFIED PERIOD MUST BE WITHIN CURRENT PLAN PERIOD
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The start and end times must be within the current plan start and end times.
EQQD018E PLAN START MUST BE EQUAL TO OR GREATER THAN CURRENT PLAN END
Explanation: The start of the future trial plan cannot be before the end of the current plan.
System action: The system waits for you to respond.
User response: Enter a valid start date and time.
EQQD019E INVALID VALUE SPECIFIED FOR COPY VSAM USAGE SELECTION
Explanation: Data entry error; see “Data Entry Errors” on page 2.
User response: To copy VSAM usage data, specify Y. Otherwise, specify N.
EQQD020E END DATE AND TIME MUST BE LATER THAN CURRENT PLAN END
Explanation: When extending the current plan, the end date and time must be later than the end of the current plan.
System action: The system waits for you to respond.
User response: Enter an end date and time that is later than the current plan end.

Tivoli OPC Messages and Codes

EQQD100E EQQD105E

EQQD100E CATALOG MANAGEMENT TASK HAS IGNORED AN INVALID QUEUE ELEMENT: DQE
Explanation: A queue element did not contain the correct eye catcher or version number.
System action: The catalog management subtask does not process the invalid element, but continues normal
processing.
User response: Contact your system programmer.
System programmer response: Save the OPC message log containing this message and contact your IBM
representative.
EQQD101I CATALOG MANAGEMENT INITIALIZATION COMPLETE
Explanation: The catalog management subtask has successfully completed its initialization.
System action: Catalog management processing starts.
User response: None.
EQQD102E CATALOG MANAGEMENT INITIALIZATION FAILED
Explanation: The catalog management subtask could not acquire the resources needed for normal operation.
System action: Catalog management processing is terminated.
Problem determination: Review previous messages on the OPC message log.
User response: Contact your systems programmer.
System programmer response: Correct all errors and either restart the catalog management subtask or restart
OPC.
EQQD104E CATALOG MANAGEMENT ABENDED WHEN PROCESSING THE FOLLOWING QUEUE ELEMENT
DQE
Explanation: An abend prevented the catalog management subtask from processing a queue element.
System action: MVS recovery/termination is requested to generate a dump. The catalog management subtask
attempts to continue normal processing.
Problem determination: Review the OPC message log dataset (MLOG), the BEX diagnostic dataset, and the dump
dataset to determine the cause of the problem.
User response: Contact your systems programmer.
System programmer response: Save the MLOG, BEX and dump datasets, and contact your IBM representative.
EQQD105E CATALOG MANAGEMENT QUEUE POINTER IS DESTROYED. DSCQ IS LOST
Explanation: The catalog management subtask abended while processing elements on the DSCQ because queue
chaining is invalid.
System action: MVS recovery/termination is requested to generate a dump. The catalog management subtask
attempts to continue normal processing.
Problem determination: Review the OPC message log dataset (MLOG), the BEX diagnostic dataset, and the dump
dataset to determine the cause of the problem.
User response: Contact your systems programmer.
System programmer response: Save the MLOG, BEX and dump datasets, and contact your IBM representative.

Chapter 6. EQQDnnn Messages

EQQD107E EQQD112I

EQQD107E OPC IS NOT AUTHORIZED TO DELETE DATASET DSNAME IN CATALOG CAT.
Explanation: An attempt was made to scratch this dataset, but OPC is not authorized to do so.
System action: OPC sets error status for the catalog management action of this dataset and the catalog
management status for this operation is set to error.
User response: Contact your systems programmer.
System programmer response: If OPC should be authorized to delete the dataset, contact your security
administrator.
EQQD108E OPC WAS UNABLE TO COLLECT CATALOG MANAGEMENT INFORMATION FOR JOB JNM, JOB ID
JOBID. RETURN CODE IS RC, REASON CODE IS RSN.
Explanation: An error occurred when OPC tried to collect information about datasets created in this operation.
System action: This information is passed to the controller, and the catalog management status for the operation is
set to N (canceled).
User response: Contact your system programmer.
System programmer response: The problem may be related to I/O errors on a catalog. If this is not the case,
please contact your IBM representative.
EQQD109E CATALOG MANAGEMENT INITIALIZATION FAILED. THE REASON IS THAT THERE IS NO
CONNECTION ESTABLISHED FOR TRANSFERRING DATASET INFORMATION TO THE
CONTROLLER.
Explanation: The catalog management subtask could not start, as it did not find a connection between this tracker
and the controller.
Problem determination: Check the OPC PARMLIB members involved.
User response: Contact your system programmer.
System programmer response: Make sure this tracker is connected to the controller by either NCF or XCF, and
that the connection has been established.
EQQD110I DATASET DSN WAS UNCATALOGED. THE DATASET RESIDES ON VOLUME VOL. APPLICATION IS
AD, INPUT ARRIVAL IS IA, OPERATION NUMBER IS OPNO, AND JOBNAME IS JNM.
Explanation: Catalog management has uncataloged this dataset. The dataset still exists, and resides on the volume
indicated in the message.
System action: Normal processing continues.
User response: None.
EQQD111I DATASET DSN WAS UNCATALOGED. APPLICATION IS AD, INPUT ARRIVAL IS IA, OPERATION
NUMBER IS OPNO, AND JOBNAME IS JNM. THE DATASET RESIDES ON THE FOLLOWING
VOLUMES
Explanation: Catalog management has uncataloged this dataset. The dataset still exists, and resides on the
volumes indicated by message EQQD112I.
System action: Normal processing continues.
User response: None.
EQQD112I VOLSER VOL.
Explanation: This list of volume numbers always follows message EQQD111I, and identifies a volume serial
number. This message is repeated for each volume on which the uncataloged dataset resides.
System action: Normal processing continues.
User response: None.

Tivoli OPC Messages and Codes

EQQD115I EQQD120I

| EQQD115I THE CATALOG MANAGEMENT EXIT XIT TERMINATED ABNORMALLY WHEN IT WAS CALLED. SEE
|
THE SYSUDUMP DATASET FOR MORE INFORMATION. THE EXIT HAS BEEN MARKED AS NOT
|
EXECUTABLE, AND WILL NOT BE CALLED AGAIN.
Explanation: An abend has occurred in the exit. Tivoli OPC has flagged the exit as not executable, and will not try
to call it again.
System action: Processing continues. The exit is called again.
User response: Contact your system programmer.
System programmer response: Analyze the dump generated for the problem, and correct the failing exit. When
you have corrected the errors, load the exit again by stopping and starting the catalog management subtask, or by
stopping and starting the Tivoli OPC address space.
EQQD116I THE CATALOG MANAGEMENT ACTION FOR DATASET DSN HAS BEEN DISCARDED.
APPLICATION IS AD, INPUT ARRIVAL IS IA, OPERATION NUMBER IS OPNO, AND JOBNAME IS
JNM.
Explanation: Due to a dialog status change, the catalog management action for this dataset has been discarded.
System action: OPC updates the status of the dataset to D (discarded).
User response: None.

| EQQD118I A JOBLOG FOR JOB JNM(JOB) HAS ARRIVED AT THE CONTROLLER. CATALOG MANAGEMENT
|
IS NOT ACTIVE AT THE CONTROLLER SO THE JOBLOG IS DISCARDED.
Explanation: A joblog or joblog status record has been sent to the controller, but catalog management has not been
activated at the controller so joblogs cannot be received.
System action: The joblog is discarded. Processing continues.
System programmer response: If you want to store joblogs, specify CATMGT=Y in the OPCOPTS statement for
the controller.
EQQD119I A DATASET COLLECTION EVENT HAS BEEN ENCOUNTERED. THE EVENT WILL NOT BE
PROCESSED BECAUSE THE CATALOG MANAGEMENT FUNCTION IS NOT ACTIVE AT THE
CONTROLLER. JOBNAME IS JNM, JOB ID IS JID AND NODE NAME IS NODE
Explanation: An event describing datasets to be managed for a job by catalog management has been passed to the
controller. However, catalog management is not active at the controller. The event information is not saved by the
controller, and no catalog management is performed for this operation.
System action: The event is discarded. No further catalog management action is taken for the operation.
System programmer response: If catalog management should be active, specify CATMGT(YES) in the controller's
OPCOPTS statement and restart the controller.
EQQD120I OPC HAS PROCESSED KEYWORD CATACT IN THE OPCOPTS STATEMENT. THE KEYWORD IS
IGNORED, BECAUSE OPC HAS BEEN DEFINED AS A TRACKER SYSTEM.
Explanation: The CATACT keyword is a controller keyword. When you define it for a tracker system it is ignored.
System action: The keyword is ignored.
System programmer response: If you do not want this message to be issued, remove the keyword from the
OPCOPTS statement and restart the system.

Chapter 6. EQQDnnn Messages

EQQD121W EQQD128I

EQQD121W OPC WILL NOT TRY TO PERFORM ANY AUTOMATIC RECOVERY ACTION FOR APPLICATION AD,
WITH INPUT ARRIVAL IA, OPERATION NUMBER OPNO.
Explanation: The catalog management for this operation was unsuccessful. Therefore OPC will not automatically
initiate auto recovery for this operation.
System action: No automatic recovery attempt is done for the operation.
User response: Use the Modify Current Plan dialog to initiate automatic recovery for this operation.
System programmer response: None.
EQQD123I NO CATALOG MANAGEMENT ACTIONS HAVE BEEN TAKEN FOR OPERATION OPNO IN
APPLICATION AD BECAUSE THE PRE-CATALOG-MANAGEMENT EXIT HAS DISCARDED THE
PROCESSING. EXIT NAME IS XIT.
Explanation: The pre-catalog-management exit has suppressed catalog management for all datasets in this
operation.
System action: Normal processing continues.
User response: None.
EQQD124E OPC COULD NOT PROCESS DATASET DSN. CATALOG NAME IS CAT. REASON FOLLOWS
Explanation: OPC tried to locate and process a dataset in the catalog indicated in the message, but failed to
perform the actions against the dataset. The reason is described in message EQQD125 that follows this message.
System action: The catalog management status for the dataset is set to error.
User response: Contact your system programmer.
System programmer response: Check message EQQD125.
EQQD125I CMTXT
Explanation: This message describes why Tivoli OPC could not process the dataset that was identified in message
EQQD124. It contains messages issued by other MVS products that were used by Tivoli OPC to process the dataset.
System action: The catalog management status for the operation is set to error.
User response: Contact your system programmer.
System programmer response: Review any messages issued by the non-Tivoli OPC products and take the action
described in the documentation for each product concerned.
EQQD126I OPC HAS ACT DATASET DSN IN CATALOG CAT. JOBNAME IS JNM, JOB ID IS JID.
Explanation: OPC has performed the action described in the message for this dataset. The catalog name in the
message is the catalog that OPC has updated. The catalog name is only printed when a JOBCAT or STEPCAT was
specified in the JCL, otherwise the catalog name contains ********.
System action: Normal processing continues.
User response: None.
EQQD128I THE CATALOG MANAGEMENT EXIT LOAD MODULE MODULE COULD NOT BE LOADED.
Explanation: The catalog management subtask could not load the EQQUX008 exit.
System action: The catalog management exit is not used.
User response: Contact your system programmer.
System programmer response: If the exit should be called by OPC, make sure that the exit load module is stored
in a library that can be reached by OPC. Also check the setting of the EXIT initialization statement for keywords
LOAD08 and CALL08. If the exit should be loaded, correct all errors and restart the catalog management subtask.

Tivoli OPC Messages and Codes

EQQD129E EQQD133I

EQQD129E A REQUEST TO CALL EXIT XIT HAS BEEN MADE IN THE CATALOG MANAGEMENT SUBTASK.
DUE TO A PREVIOUS ABNORMAL TERMINATION IN THE EXIT, IT WILL NOT BE CALLED AGAIN.
Explanation: The exit that was going to be called in the catalog management subtask has terminated abnormally in
a previous call. Due to this abnormal termination, the exit was flagged as not usable and will not be called.
System action: The catalog management status for the operation is set to error and no datasets are deleted or
uncataloged.
User response: Contact your systems programmer.
System programmer response: Correct the module and restart the catalog management subtask.
EQQD130E THE JOBLOG RETRIEVAL EXIT USRX HAS ABENDED WHILE PROCESSING JOB JNM JOBNUM
JID, OPERATION OPN IN APPLICATION APPL WITH IA IA SCHEDULED ON WORKSTATION
WSNAME.
THE EXIT IS MARKED AS NOT USABLE, AND WILL NOT BE CALLED AGAIN
Explanation: The exit abended while processing. Tivoli OPC will not try to call it again unless the catalog
management subtask is restarted. The exit is flagged as not executable.
System action: The processed operation gets a joblog-request status of Error. Dialog users cannot use the
step-level restart function or browse-joblog function for this or other jobs until the error has been corrected.
System programmer response: Investigate the SYSxDUMP dataset, correct the failing exit, and restart the catalog
management subtask or Tivoli OPC.
EQQD131E THE JOBLOG RETRIEVAL EXIT USRX HAS RETURNED RC=8 WITH ERROR TEXT ETXT
WHEN PROCESSING JOB JNM JOBNUM JID FOR OPERATION NUMBER OPN
IN APPLICATION APPL WITH IA IA SCHEDULED ON WORKSTATION WSNAME.
Explanation: Tivoli OPC could not retrieve joblog data as requested for this job. DELAYED or DELAYEDEXIT is
defined for JOBLOGRETRIEVAL.
System action: The processed operation gets a joblog-request status of Error. Dialog users cannot use the
step-level restart function or browse-joblog function.
System programmer response: Correct all errors in the exit and restart the catalog management subtask.

| EQQD132E THE JOBLOG RETRIEVAL EXIT USRX HAS RETURNED RC=12 WITH ERROR TEXT ETXT
|
JNM JOBNUM JID, FOR OPERATION OPN IN APPLICATION APPL WITH IA IA
|
SCHEDULED ON WORKSTATION WSNAME
Explanation: The exit could not retrieve joblog data as requested for this job. DELAYED or DELAYEDEXIT is
defined for JOBLOGRETRIEVAL. The exit has requested that Tivoli OPC does not call it again.
System action: The processed operation gets a joblog-request status of Error. The exit is not called again.
System programmer response: Correct all errors in the exit and restart the catalog management subtask or the
address space.
EQQD133I THE JOBLOG FOR JNM JID FOR OPERATION OPN IN APPLICATION APPL WITH IA IA SCHEDULED
ON WORKSTATION WSNAME DOES NOT CONTAIN ALL DATASETS
REQUIRED BY THE OPC CATALOG MANAGEMENT FUNCTION
Explanation: A joblog-retrieval request has been issued to a tracker where DELAYEDSYSOUT or DELAYED is
specified for JOBLOGRETRIEVAL. The catalog management subtask has determined that the joblog for the current
job does not contain all the joblog datasets required by Tivoli OPC. The necessary datasets are JESJCL and
JESYSMSG, one or both of the datasets are missing.
System action: The catalog management subtask processing continues. The joblog-retrieval status for the operation
is set to Error.
System programmer response: Verify the JES installation setup or that the job does not suppress JESJCL or
JESYSMSG files, or both, from being created.

Chapter 6. EQQDnnn Messages

EQQD134E EQQD136E

EQQD134E CATALOG MANAGEMENT TASK COULD NOT FIND ANY SYSOUT DATA SETS FOR JOB JNM(JID)
IN APPLICATION ADID.
Explanation: A joblog-retrieval request has been issued to a tracker where DELAYEDSYSOUT is specified for
JOBLOGRETRIEVAL. Catalog management (CM) has tried to retrieve the SYSOUT datasets for the requested job
but no datasets have been returned by the JES.
System action: No more attempts to retrieve SYSOUT datasets are made for this job. CM attempts to continue
normal operation with the next request. The joblog-retrieval status for this operation is set to Error.
Problem determination: In a JES3 system, check that the SYSOUT class is defined as external writer classes to
JES3.
Operator response: Determine the current status of the job. If necessary, set the correct status for the job
manually.
System programmer response: If necessary, correct any incorrectly specified operands in the JOBLOGRETRIEVAL
and JOBLOGDISP keywords and restart the catalog management subtask or the address space.
EQQD135E UNEXPECTED SUBSYSTEM REQUEST RETURN CODES FOR JOB JNM (JOBNUM) IN
APPLICATION ADID.
REQUEST TYPE: TYPE, R15: R15, SSOBRETN: SSOBRETN
Explanation: A joblog-retrieval request has been issued to a tracker where DELAYEDSYSOUT or DELAYED is
specified for JOBLOGRETRIEVAL. An error occurred when the catalog management (CM) subtask was retrieving
information from JES for job JOBNAME. The information request is either a status request (request type = CS) or a
process SYSOUT request (request type = SO). R15 and SSOBRETN are return codes from JES. CM issues this
message because this combination of return codes cannot be handled by the subtask.
System action: This error message is written to the tracker message log, EQQMLOG. CM stops processing the
current joblog-request and the joblog-retrieval status is set to Error in the current plan.
User response: Step-level restart the job manually and contact your system programmer.
System programmer response: Save the EQQMLOG containing this error message and contact your IBM
representative.
EQQD136E CM ALLOCATION OF A SYSOUT DATA SET FAILED FOR JNM(JID) IN APPLICATION ADID.
DYNAMIC ALLOCATION ERROR CODE: RETC, INFORMATION REASON CODE: RSNC
Explanation: A joblog-retrieval request has been issued to a tracker where DELAYEDSYSOUT or DELAYED is
specified for JOBLOGRETRIEVAL. The catalog management (CM) subtask could not allocate a SYSOUT dataset for
the job JOBNAME(JOBNUM). The dynamic allocation error and information reason codes are given in hexadecimal.
System action: This error message is written to the tracker message log, EQQMLOG. CM stops processing the
current joblog-request and the joblog-retrieval status is set to Error Completion in the current plan.
Problem determination: Use the DYNALLOC return code and reason code to determine the cause of the error. For
more information, refer to the appropriate DYNALLOC documentation for the currently active MVS system.
User response: Step-level restart the job manually and contact your system programmer.
System programmer response: Look up the meaning of the dynamic allocation error and information reason codes,
and take appropriate action.

Tivoli OPC Messages and Codes

EQQD137E EQQD140E

EQQD137E CM UNALLOCATION OF A SYSOUT DATA SET FAILED FOR JNM (JID)
IN APPLICATION ADID.
DYNAMIC ALLOCATION ERROR CODE: RETC, INFORMATION REASON CODE: RSNC
Explanation: A joblog-retrieval request has been issued to a tracker where DELAYEDSYSOUT or DELAYED is
specified for JOBLOGRETRIEVAL. An error occurred when the catalog management (CM) subtask was deallocating
a SYSOUT dataset for the job JOBNAME(JOBNUM). The dynamic allocation error and information reason codes are
given in hexadecimal.
System action: This error message is written to the tracker message log, EQQMLOG. CM stops processing the
current joblog-retrieval request, and the joblog-retrieval status is set to Error Completion in the current plan.
Problem determination: Use the DYNALLOC return code and reason code to determine the cause of the error. For
more information, refer to the appropriate DYNALLOC documentation for the currently active MVS system.
User response: Step-level restart the job manually and contact your system programmer.
System programmer response: Look up the meaning of the dynamic allocation error and information reason codes,
and take appropriate action.
EQQD138E CM OPEN OF A SYSOUT DATA SET FAILED FOR JNM(JID) IN APPLICATION ADID.
DDNAME: DDNAME, DSNAME: DSNAME
Explanation: A joblog-retrieval request has been issued to a tracker where DELAYEDSYSOUT or DELAYED is
specified for JOBLOGRETRIEVAL. An error occurred when the catalog management (CM) subtask was trying to
open a SYSOUT dataset for the job JOBNAME(JOBNUM).
System action: This error message is written to the tracker message log, EQQMLOG. CM stops processing the
current joblog-request and the joblog-retrieval status is set to Error Completion in the current plan.
User response: Step-level restart the job manually and contact your system programmer.
System programmer response: Determine the reason for the open failure and correct all errors.
EQQD139E CM ABEND CODE ABCODE OPENING A SYSOUT DATA SET FOR JOBNAME(JOBNUM) IN
APPLICATION ADID, DDNAME: DDNAME, DSNAME: DSNAME
Explanation: A joblog-retrieval request has been issued to a tracker where DELAYEDSYSOUT or DELAYED is
specified for JOBLOGRETRIEVAL. An error occurred when the catalog management subtask tried to open a
SYSOUT dataset for the job JOBNAME(JOBNUM).
System action: This error message is written to the tracker message log, EQQMLOG. CM stops processing the
current joblog-request and the joblog-retrieval status is set to Error in the current plan.
User response: Step-level restart the job manually and contact your system programmer.
System programmer response: Determine the reason for the abend and correct all errors.

| EQQD140E THE JOBLOG RETURNED BY EXITNAME FOR JNM JID IN APPLICATION APPL IS INCOMPLETE.
|
FOLLOWING DATA NOT FOUND: DDNAME1, DDNAME2
Explanation: A joblog-retrieval request has been issued to a tracker where DELAYEDEXIT or DELAYED is specified
for JOBLOGRETRIEVAL. Catalog management (CM) makes a basic validity check of what is passed back from the
joblog-retrieval exit. It checks for the existence of a jobcard (which is always part of the JESJCL sysout dataset) and
the IEF375I/IEF376I messages (which are always part of the JESYSMSG dataset). DDNAME (or DDNAMEs)
associated with the missing data are displayed.
System action: This error message is written to the tracker message log, EQQMLOG. Catalog management stops
processing the current joblog-retrieval request and the joblog-retrieval status is set to Error in the current plan.
User response: Step-level restart the job manually and contact your system programmer.
System programmer response: Verify that JES installation setup or the job does not suppress the JESJCL file or
the JESYSMSG file, or both files, from being created. Verify the logic of the joblog retrieval exit.

Chapter 6. EQQDnnn Messages

EQQD141E EQQD146I

EQQD141E OPC COULD NOT RETRIEVE REQUIRED DATA FROM THE HISTORY DATABASE.
Explanation: OPC tried to access operation data in the DB2 history database but failed. The reason is described in
message EQQD142, which follows this message.
System action: Processing continues, but the required data is not passed to the caller.
User response: Contact your system programmer.
System programmer response: Check message EQQD142.

| EQQD142I DB2TXT
Explanation: This message describes why Tivoli OPC could not access the DB2 history database. It contains
messages issued by the DB2 system.
System action: Processing continues.
User response: Contact your system programmer.
System programmer response: Review the messages issued by DB2 and take the action described in the DB2
documentation.
EQQD143I DB2 SYSTEM DB2 HAS STOPPED. THE HISTORY FUNCTION IS NOT AVAILABLE
Explanation: OPC has discovered that the DB2 system has either stopped or abended. It cannot support requests
for data from the history database.
System action: Processing continues but the history function is not available.
User response: Contact your system programmer.
System programmer response: Restart the DB2 system that stopped or abended.
EQQD144I DB2 SYSTEM DB2 IS AVAILABLE
Explanation: The DB2 system containing OPC history data is available.
System action: Processing continues.
User response: None.
System programmer response: None.
EQQD145E OBJECT OBJ COULD NOT BE CREATED. REASON FOLLOWS:
Explanation: The initialization program tried to create a table, index or an alias in the history database but failed.
The reason is described in message EQQD142, which follows this message.
System action: Processing is terminated.
User response: Contact your system programmer.
System programmer response: Check message EQQD142.
EQQD146I OBJECT OBJ HAS BEEN CREATED IN THE HISTORY DATABASE
Explanation: The initialization program has successfully created this object in the history database.
System action: Processing continues.
User response: None.

Tivoli OPC Messages and Codes

EQQD147E EQQD149E

EQQD147E THE SYSIN FILE CONTAINS BAD OR MISSING PARAMETERS
Explanation: The initialization program was unable to create the history database because some SYSIN parameters
are missing or specified incorrectly. The following parameters are required to create the history database:
DBNAME
MAIN
MAINX
OCC
OCCX1
OCCX2
OCCX3
OPR
OPRX1
OPRX2
OPRX3
DS
DSX1
DSX2
DSX3
JL
JLX1
JLX2
JLX3

The database name
The name of the OPC history database main table
The main table index name
The name of the OPC table that stores occurrence data
Occurrence data index 1
Occurrence data index 2
Occurrence data index 3
The name of the OPC table that stores operation data
Operation data index 1
Operation data index 2
Operation data index 3
The name of the OPC table that stores operation dataset information
Dataset information index 1
Dataset information index 2
Dataset information index 3
The name of the OPC table that stores joblog status information
Joblog status information index 1
Joblog status information index 2
Joblog status information index 3

System action: Processing is terminated.
User response: Contact your system programmer.

| EQQD148E AN IDENTIFY REQUEST FOR CONNECTION TO DB2 WAS REJECTED. DB2 HAS BEEN STARTED
|
IN RESTRICTED ACCESS MODE.
| Explanation: Tivoli OPC loses the connection to DB2 because DB2 was started in restricted access mode, using
| ACCESS(MAINT).
| System action: Processing continues
| User response: Contact your system programmer.
| System programmer response: Stop DB2 and restart it without the ACCESS keyword. To connect Tivoli OPC to
| DB2, as soon as DB2 is up again, enter the following operator command: /F subsystemname, DB2RETRY
| EQQD149E THE CAF INTERFACE ROUTINE FAILED WITH RC
| Explanation: This message explains why Tivoli OPC cannot connect with DB2. It includes the error code issued by
| the DB2 system.
| System action: Processing continues.
| User response: Contact your system programmer.
| System programmer response: Review the return code issued by DB2 and follow the actions described in the DB2
| documentation.

Chapter 6. EQQDnnn Messages

Tivoli OPC Messages and Codes

EQQEX01I EQQEX05E

Chapter 7. EQQEXnn Messages
EQQEX01I THE EXTERNAL ROUTER TASK HAS STARTED
Explanation: The external router task has successfully completed initialization. The external router task handles the
interface to the operation-initiation exit, EQQUX009, which is used to start operations at user-defined destinations.
System action: The external router task processing continues.
User response: None.
EQQEX02I THE EXTERNAL ROUTER TASK HAS ENDED
Explanation: The external router task has ended either because the Tivoli OPC controller is in the process of
shutting down or as a result of an operator modify command to terminate this task or a related task.
System action: Tivoli OPC processing continues.
User response: None.
EQQEX03E THE EXTERNAL ROUTER TASK HAS ENDED DUE TO PROCESSING ERRORS
Explanation: The external router task has terminated due to processing errors.
Problem determination: Check the Tivoli OPC message log and the dump datasets for additional information that
describes the problem.
System action: Normal Tivoli OPC processing continues.
User response: Contact your system programmer.
System programmer response: If the cause of the error is due to a problem in the operation-initiation exit,
EQQUX009, correct the error and restart the Tivoli OPC controller. If the cause of the error cannot be determined,
take a dump of the Tivoli OPC address space, retain a copy of the message log and the job tracking datasets and
contact your IBM representative.
EQQEX04W NO ROUTING FOR USER DESTINATIONS IS IN EFFECT
Explanation: The external router task has not been able to load the operation-initiation exit, EQQUX009.
System action: Normal Tivoli OPC processing continues. Operations at user-defined workstations are not started.
User response: If the Tivoli OPC controller includes workstations with user-defined destinations, contact your system
programmer.
System programmer response: Determine why Tivoli OPC was unable to find or load the operation-initiation exit,
EQQUX009. When the problem has been corrected restart the Tivoli OPC controller.
EQQEX05E THE EXTERNAL ROUTER HAS TERMINATED DUE TO AN INITIALIZATION FAILURE
Explanation: The external router task could not acquire the resources required for normal operation.
System action: External router processing is terminated.
Problem determination: Review previous messages in the Tivoli OPC message log.
User response: Contact your system programmer.
System programmer response: Correct all errors and restart Tivoli OPC.

 Copyright IBM Corp. 1991, 1999

EQQEX06E EQQEX08E

EQQEX06E A SEVERE ERROR IN THE EXTERNAL ROUTER TASK HAS CAUSED ONE OR MORE REQUESTS
TO BE LOST
Explanation: The external router task encountered an error processing elements on the EXAQ. As a result, at least
one queue element has been lost.
System action: MVS recovery/termination is requested to generate a dump. The external router task attempts to
continue normal processing.
Problem determination: Review the Tivoli OPC message log dataset, the EQQDUMP diagnostic dataset, and the
dump dataset to determine the cause of the problem.
Tivoli OPC administrator response: Save the message log, diagnostic and dump datasets, and contact your IBM
representative.
EQQEX07E THE EXTERNAL ROUTER TASK ABENDED WHILE PROCESSING THE FOLLOWING REQUEST
REQUEST
Explanation: An abend prevented the external router task from processing a queue element.
System action: MVS recovery/termination is requested to generate a dump. The external router task attempts to
continue normal processing.
Problem determination: Review the Tivoli OPC message log dataset, the EQQDUMP diagnostic dataset, and the
dump dataset to determine the cause of the problem.
User response: Contact your system programmer.
System programmer response: Save the message log, diagnostic and dump datasets, and contact your IBM
representative.
EQQEX08E THE EXTERNAL ROUTER TASK HAS IGNORED THE FOLLOWING QUEUE ELEMENT: REQUEST
Explanation: The external router task has detected an invalid queue element on its queue.
System action: The element is discarded from the external router queue. The task continues normal processing.
Problem determination: Review the Tivoli OPC message log dataset.
User response: Contact your system programmer.
System programmer response: Save the message log (EQQMLOG) and the current plan (EQQCPxDS) and
contact your IBM representative.

Tivoli OPC Messages and Codes

EQQE000I EQQE001E

Chapter 8. EQQEnnn Messages
EQQE000I TOTAL NUMBER OF EVENTS PROCESSED BY THE EVENT MANAGER TASK IS: NUMEV
NUMBER OF EVENTS SINCE THE PREVIOUS MESSAGE IS: NEWEV
EVENT MANAGER QUEUE LENGTH STATISTICS FOLLOW:
TOTAL
Q1
Q2
Q5 Q10 Q20 Q50 Q100 >100
CALLS Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8
Explanation: This message is issued if the EVENTS statistics are made active, either by specifying the
STATMSG(EVENTS) keyword in the JTOPTS initialization statement or by issuing the modify command, /F
subsys,EVESTA=ON.
Once activated, this message is regularly issued by the event manager subtask, until it is deactivated. The interval
between two messages is calculated as follows:
If STATIM is nonzero (in the initial parm or by modify command) the message is issued approximately every n
minutes (where n is the STATIM value), if any events have been processed.
Otherwise, if EVELIM is nonzero (in the initial parm or by modify command), the message is issued approximately
every n events (where n is the EVELIM value).
Otherwise, the message is issued approximately every n events, where n is half the JTOPTS BACKUP keyword
value (default BACKUP is 400).
This message shows the total number of events processed and how many events have been processed since the
message was last issued or, if it is the first time it is issued, since the last time the event manager processed the
events queue.
The message also contains information about how many events were waiting to be processed each time the queue
processing routine was called. The value below the TOTAL heading gives the total number of times that the event
queue was emptied. The values below the Qx headings give the number of times that the length of the queue was in
a particular interval. For example, Q50 gives the number of times that the queue was between 21 and 50 events.
System action: Normal Tivoli OPC processing continues.
User response: None.
EQQE001E ETT FAILED TO ADD ADID FOR TRIGGERING EVENT TRIG I/O ERROR READING AD DATA BASE
Explanation: Event-triggered tracking (ETT) was triggered by an event, but could not add the associated application
due to an I/O-error on the application description database.
System action: The associated application was not added by ETT, but ETT processing continues normally.
Problem determination: Review previous messages in the Tivoli OPC message log dataset to determine the cause
of the error.
User response: Contact your system programmer.
System programmer response: Save the message log dataset containing this error and contact your IBM
representative.

 Copyright IBM Corp. 1991, 1999

EQQE002E EQQE003E

EQQE002E ETT FAILED TO ADD ADID FOR TRIGGERING EVENT TRIG FIRST OPERATION NOT ON CPU WS,
JOBNAME CANNOT BE REPLACED
Explanation: Event-triggered tracking (ETT) was triggered by an event, but could not add the associated application
since the first operation (that is, the operation with the lowest operation number) was not a CPU-operation and ETT's
Job Name Replace option was specified.
System action: The associated application was not added by ETT, but ETT processing continues normally.
Problem determination: If the Job Name Replace option is used, check the application description (AD) database to
make sure that the first operation in the application to be added is a CPU-operation. Or, check the ETT criteria table
to make sure that the correct Job Name Replace option was specified. Or, check that the CPU workstation is part of
the control plan since it might have been added to the workstation database after a new control plan was created.
User response: Correct the ETT criteria table or the AD database, or both, or get the CPU workstation into the
control plan.
System programmer response: None.
EQQE003E ETT FAILED TO ADD ADID FOR TRIGGERING EVENT TRIG FIRST OPERATION HAS
PREDECESSORS, JOBNAME CANNOT BE REPLACED
Explanation: Event-triggered tracking (ETT) was triggered by an event, but could not add the associated application
since the first operation (that is, the operation with the lowest operation number) had internal predecessor operations,
and ETT's Job Name Replace option was specified.
System action: The associated application was not added by ETT, but ETT processing continues normally.
Problem determination: Check the application description (AD) database to make sure that the first operation in the
application to be added does not have any internal predecessor operations. Or, check the ETT criteria table to make
sure that the correct Job Name Replace option was specified.
User response: Correct the ETT criteria table or the AD database, or both.
System programmer response: None.

Tivoli OPC Messages and Codes

EQQE004I EQQE005I

EQQE004I CP ENQ LOCK STATISTICS SINCE PREVIOUS MESSAGE FOLLOW:
NAME
NEXCL NSHRD THELD TWAIT AHELD AWAIT
Explanation: This message is issued if the CP ENQ LOCK statistics are active. This can be done either by
specifying the STATMSG(CPLOCK) keyword in the JTOPTS initialization statement or by using the modify command,
/F subsys,CPQSTA=ON.
Once activated, this messages is regularly issued by the event manager subtask, until it is deactivated. The interval
between two messages is calculated as follows:
If STATIM is nonzero (in the initial parm or by modify command) the message is issued approximately every n
minutes (where n is the STATIM value), if any events have been processed.
Otherwise, if EVELIM is nonzero (in the initial parm or by modify command), the message is issued approximately
every n events (where n is the EVELIM value).
Otherwise, the message is issued approximately every n events, where n is half the JTOPTS BACKUP keyword
value (default BACKUP is 400).
This message shows that Tivoli OPC tasks have referred to the current plan data since the last message was issued,
or if it is the first time it is isuued, since the last time the event manager processed the events queue.
The message consists of column headers that describe data indicating how often and in what way the current plan
dataset has been referenced. The data values are displayed in the message EQQE005I. The values for each
heading are:
NAME
NEXCL
NSHRD
THELD
TWAIT
AHELD
AWAIT

The
The
The
The
The
The
The

name of the Tivoli OPC task for which data was gathered.
number of times that the task acquired exclusive use of the current plan.
number of times that the task acquired shared use of the current plan.
total amount of time, in seconds, that the task was using the current plan.
total amount of time, in seconds, that the task was waiting to use the current plan.
average amount of time, in seconds, that the task was using the current plan.
average amount of time, in seconds, that the task was waiting to use the current plan.

System action: Normal Tivoli OPC processing continues.
User response: None.
EQQE005I NAME NEXCL NSHRD THELD TWAIT AHELD AWAIT
Explanation: This message is issued together with the message EQQE004I. See the explanation for EQQE004I for
details about when it is issued.
The message contains information about the use of the current plan dataset by one Tivoli OPC subtask. The
descriptions of the column headings in the previous message, EQQE004I, also describe the variables in this message.
System action: Normal Tivoli OPC processing continues.
User response: None.

Chapter 8. EQQEnnn Messages

EQQE006I EQQE007I

EQQE006I EVENT MANAGER EVENT TYPE STATISTICS FOLLOW:
TYPE NTOT NNEW TTOT
TNEW
TAVG NAVG

NSUS

Explanation: This message is issued if the EVENTS statistics are active. This can be done either by specifying the
STATMSG(EVENTS) keyword in the JTOPTS initialization statement, or by using the modify command, /F
subsys,EVESTA=ON.
Once activated, this message is regularly issued by the event manager subtask, until it is deactivated. The interval
between two messages is calculated as follows:
If STATIM is nonzero (in the initial parm or by modify command) the message is issued approximately every n
minutes (where n is the STATIM value), if any events have been processed.
Otherwise, if EVELIM is nonzero (in the initial parm or by modify command), the message is issued approximately
every n events (where n is the EVELIM value).
Otherwise, the message is issued approximately every n events, where n is half the JTOPTS BACKUP keyword
value (default BACKUP is 400).
This message consists of column headers that describe measured values that are displayed in the message
EQQE007I that follows. The measured values contain information about the total number of events processed, how
many have been processed since the message was last issued, or, if it is the first time it is issued, since the last time
the event manager processed the events queue, and the elapsed time that the event manager needed to process the
events.
The values for each heading are:
TYPE
TTOT
NNEW
TTOT
TNEW
TAVG
NAVG
NSUS

The
The
The
The
The
The
The
The

event type for which data was gathered.
total number of events of this type.
number of events of this type since the last message.
total time, in seconds, used to process this event type.
total time, in seconds, used to process this event type since the last message.
average time, in seconds, used to process an event of this type.
average time, in seconds, used to process an event of this type since the last message.
number of times that the event manager could not immediately process an event of this type.

Valid values in the TYPE column are:
ALL
1
2
3S
3J
3P
4
5
USER
CATM
OTHR

This line is a total line for all event types.
Reader events.
Job start events.
Step end events.
Job end events.
Job on output queue events.
Dataset print events.
Job purge events.
User generated event, EQQUSINT program or the OPSTAT command.
Catalog management events.
Other events.

System action: Normal Tivoli OPC processing continues.
User response: None.
EQQE007I TYPE NTOT NNEW TTOT

TNEW

TAVG NAVG NSUS

Explanation: This message is issued if STATMSG(EVENTS) has been specified in the JTOPTS initialization
statement. The message contains information about how the event manager subtask processed one type of event.
The descriptions of the column headings in the previous message, EQQE006I, also describe the variables in this
message.
System action: Normal Tivoli OPC processing continues.
User response: None.

Tivoli OPC Messages and Codes

EQQE008I EQQE011E

| EQQE008I TYPE08
|
Q10 Q100 Q1000 Q5000 Q10000 >10000
|
R1 R2 R3 R4 R5
R6
Explanation: This message is issued if the WSA statistics are active. This can be done either by specifying the
STATMSG(WSATASK) keyword in the JTOPTS initialization statement, or by using the modify command, /F
subsys,WSASTA=ON.
Once activated, this message is regularly issued by the event manager subtask, until it is deactivated. The interval
between two messages is calculated as follows:
If STATIM is nonzero (in the initial parm or by modify command) the message is issued approximately every n
minutes (where n is the STATIM value), if any events have been processed.
Otherwise, if EVELIM is nonzero (in the initial parm or by modify command), the message is issued approximately
every n events (where n is the EVELIM value).
Otherwise, the message is issued approximately every n events, where n is half the JTOPTS BACKUP keyword
value (default BACKUP is 400).
This message shows some statistic information about the operations ready queue list and its handling by the WSA
task since it was last issued, or, if it is the first time it is isuued, since the last time the event manager processed the
events queue.
The set of variables (R1-R6) gives the number of times that the ready list was found to be within a specific range,
each time the WSA task processed it to select a “winner” operation (one to be submitted). For example, R1=10
means that the ready queue list was found 10 times to contain n operations, where n < 10.
System action: Normal Tivoli OPC processing continues.
User response: None.

| EQQE009I TYPE09 VALUE09
Explanation: This message is issued together with message EQQE008I. See the explanation for EQQE008I for
details about when it is used.

| The meanings of VALUE09 are as follows:
V1
V2
V3
V4
V5
V6
V7
V8
V9

Size of the ready list queue when the message is issued
Number of operations whose status changed to ready (R, *, or A) since the last message
Number of operations whose status changed to started since the last message
Number of operations whose status changed to completed since the last message
Number of times the WSA task was called to select a 'winner' operation since the last message
Number of times the JS VSAM was accessed to read JCL since the last message
Number of times the JOBLIB PDS was accessed to read JCL since the last message
Number of times the User Exit 001 was called since the last message
Number of times the User Exit 002 was called since the last message

System action: Normal Tivoli OPC processing continues.
User response: None.
EQQE011E ETT FAILED TO ADD ADID FOR TRIGGERING EVENT TRIG NO ACTIVE APPLICATION
DESCRIPTION IN AD DATABASE
Explanation: Event-triggered tracking (ETT) was triggered by an event but could not add the associated application
because there was no active application description (AD) in the AD database.
System action: The associated application was not added by ETT, but ETT processing continues normally.
Problem determination: Check the ETT criteria to make sure that the triggering event identifies an active application
description.
User response: Correct the ETT criteria table or the AD database.

Chapter 8. EQQEnnn Messages

EQQE012E EQQE016I

EQQE012E ETT FAILED TO ADD ADID FOR TRIGGERING EVENT TRIG UNABLE TO ALLOCATE NECESSARY
STORAGE
Explanation: Tivoli OPC was unable to allocate storage needed to build the tables required when adding an
application (occurrence) to the current plan.
System action: The associated application was not added by event-triggered tracking (ETT), but ETT processing
continues normally.
Problem determination: Check the region size allocated to the Tivoli OPC started task.
User response: Contact your system programmer.
System programmer response: Increase the region for the Tivoli OPC started task.
EQQE013E ETT FAILED TO ADD ADID FOR TRIGGERING EVENT TRIG ERROR DETECTED BY MODIFY
CURRENT PLAN INTERFACE
Explanation: Tivoli OPC was unable to add the application because the modify current plan interface detected an
error.
System action: The associated application was not added by event-triggered tracking (ETT), but ETT processing
continues normally.
Problem determination: Check the Tivoli OPC message log data for EQQMxxx messages (that is, the Modify
Current Plan messages) preceding this message. These messages give the exact reason why the application could
not be added.
User response: Contact your system programmer.
System programmer response: Save the message log dataset containing these error messages and contact your
IBM representative.
EQQE014E ETT FAILED TO ADD ADID FOR TRIGGERING EVENT TRIG AD DATABASE NOT OPEN
Explanation: Event-triggered tracking (ETT) was triggered by an event but could not add the associated application
since the application description database was not open.
System action: The associated application was not added by ETT, but ETT processing continues normally.
Problem determination: This is a Tivoli OPC internal error.
System programmer response: Save the message log dataset containing these error messages and contact your
IBM representative.
EQQE015W ETT CANNOT TRACK JOB JOB EVEN THOUGH APPLICATION APPL HAS BEEN ADDED
Explanation: Event-triggered tracking (ETT) was unable to track the specified job, even though the specified
associated application was successfully added.
System action: The job that triggered the addition of application APPL is not tracked by Tivoli OPC. ETT
processing continues.
Problem determination: The track keyword of the job tracking option statement has most likely been defined so that
no tracking should occur.
User response: Review the tracking options and correct if in error.
EQQE016I ETT HAS SUCCESSFULLY ADDED ADID FOR TRIGGERING EVENT TRIG
Explanation: Event-triggered tracking (ETT) has detected a triggering event (TRIG) and has added the associated
application (ADID) to the current plan.
System action: Processing continues.
User response: None.

Tivoli OPC Messages and Codes

EQQE017I EQQE023I

EQQE017I THE ETT FUNCTION IS ACTIVATED
Explanation: The event-triggered tracking (ETT) function has been activated from the dialog or has been started
during the controller start up process because ETT(YES) is specified on the JTOPTS initialization statement.
System action: Processing continues.
User response: None.
EQQE018I THE ETT FUNCTION IS DEACTIVATED
Explanation: The event-triggered tracking (ETT) function has been deactivated due to a dialog request or because
the event manager subtask has been requested to terminate.
System action: Processing continues.
User response: None.
EQQE019I JOBNAME(JOBNUM) WAS NOT SUBMITTED BY OPC AND TRACK(OPCASUB) OR TRACK(JOBOPT)
IS ACTIVE, BUT THE JOB WILL BE TRACKED ANYWAY BECAUSE IT BELONGS TO AN
APPLICATION THAT WAS ADDED BY ETT
Explanation: Event-triggered tracking (ETT) has a job on its list of jobs to be tracked, but the specified job has not
been submitted by Tivoli OPC.
System action: Tivoli OPC tracks the job because it belongs to an application that was added by ETT.
User response: None.
EQQE021E THE EVENT MANAGER WAS UNABLE TO SET STATUS STATUS FOR JOBNAME(JOBNUM)
Explanation: The event manager was unable to change the status of an operation in the current plan.
System action: The status of the current operation remains unchanged. The event manager continues normally by
processing the next event.
Problem determination: Review earlier messages in the Tivoli OPC message log to determine which operation is
involved. The most likely cause of this error is an unsuccessful I/O operation against the current plan dataset.
User response: If the current operation can be determined, set the correct status for this operation.
System programmer response: Correct all errors and, if necessary, restart Tivoli OPC.
EQQE022E EVENT MANAGER INITIALIZATION FAILED
Explanation: The event manager could not acquire all resources required for normal operation. The most likely
cause of this error is that the subsystem is being stopped but the normal mode manager subtask has not started. It is
also possible that the JCL repository dataset could not be opened.
System action: If this message is issued while the Tivoli OPC subsystem is being stopped, subsystem termination
continues normally. Otherwise, message EQQZ045W is issued.
System programmer response: Review previous messages in the Tivoli OPC message log to determine the exact
reason for this message.
EQQE023I THE EVENT MANAGER ENDED NORMALLY
Explanation: This message is issued if the Tivoli OPC subsystem is being stopped and Event Manager initialization
has completed successfully. The message is also issued if the Event Manager has been requested to stop by an
operator modify command.
System action: Termination processing continues.
User response: None.

Chapter 8. EQQEnnn Messages

EQQE024E EQQE029E

EQQE024E THE EVENT MANAGER TERMINATED BECAUSE OF UNRECOVERABLE ERRORS
Explanation: This message is issued if a serious error that prevents normal operation by the Event Manager has
been encountered after Event Manager initialization has completed.
System action: Message EQQZ045W is issued.
System programmer response: Review earlier messages in the Tivoli OPC message log to determine the exact
reason for this message.
Operator response: If the Event Manager should be activated, issue an operator modify command to start the Event
Manager again.
EQQE025I THE EVENT MANAGER HAS STARTED
Explanation: Event Manager initialization has completed successfully and the Event Manager is about to start
processing.
System action: Tivoli OPC processing continues.
User response: None.
EQQE026I APPLICATION APPL ENDED IN ERROR EC. OPER = OPERNUM, PRTY = PRI, IA = IA
Explanation: This message is issued when an operation on a general type workstation has ended in error and the
ALERTS initialization statement specifies TYPE(ERROROPER).
System action: Normal Tivoli OPC processing continues.
User response: Perform error recovery actions for the specified operation.
EQQE027I OPERATION OPERNUM, IN APPLICATION APPL, IA = ARRTIME IS LATE
Explanation: This message is issued when a ready operation on a general type workstation has reached its latest
start time but has not yet started.
System action: Normal Tivoli OPC processing continues.
User response: Investigate what is keeping the operation from starting and take appropriate actions to enable it to
start.
EQQE028I LONG DURATION FOR OPERATION OPERNUM, IN APPLICATION APPL, IA = ARRTIME
Explanation: This message is issued when a started operation on a general type workstation has been active longer
than its estimated duration multiplied by the feedback limit, divided by 100. For example, if the feedback limit is 200
and the estimated duration is ten minutes, the message is issued if the operation has been active longer than twenty
minutes.
System action: Normal Tivoli OPC processing continues.
User response: Investigate why the operation has been active so long. If possible, take corrective action to speed
up operation processing.
EQQE029E TRACK (OPCASUB/JOBOPT) IS SPECIFIED, AND AS USER SUBMITTED JOBNAME(JOBNUM)
OUTSIDE OPC, IT WILL NOT BE TRACKED
Explanation: The job is not one that Tivoli OPC has submitted although it is known to Tivoli OPC as one that should
be tracked. However, because someone submitted the job outside of Tivoli OPC’s control, the job is not tracked.
System action: None.
User response: None.

Tivoli OPC Messages and Codes

EQQE030I EQQE040W

EQQE030I USER USER CAUSED A NEW SPECIAL RESOURCE TO BE DEFINED. NAME OF NEW RESOURCE
IS: RESOURCE
Explanation: The request to create the new resource came from: an SRSTAT command, EQQEVPGM using
SRSTAT as input, the EQQUSINS subroutine, the EQQUSIN subroutine, or from the dataset triggering function.
System action: Processing continues.
User response: None.
EQQE036I JOB JOBNAME(JNUM) ENDED IN ERROR EC. PRTY=PRI, APPL = APPL, WORK STATION = WSID, IA
= IA
Explanation: This message is issued when an operation on a computer or printer workstation has ended in error and
the ALERTS initialization statement specifies TYPE(ERROROPER).
System action: Normal Tivoli OPC processing continues.
User response: Perform error recovery actions for the current job.
EQQE037I JOB JOBNAME(JNUM), IN APPLICATION APPL, IS LATE, WORK STATION = WSID, IA = ARRTIME
Explanation: This message is issued when a job has reached its latest start time but has not yet started.
System action: Normal Tivoli OPC processing continues.
User response: Investigate what is keeping the job from starting and take appropriate actions to enable it to start.
EQQE038I LONG DURATION FOR JOB JOBNAME(JNUM), IN APPLICATION APPL, WORK STATION = WSID, IA
= ARRTIME
Explanation: This message is issued when a job has been active longer than its estimated duration multiplied by the
feedback limit, divided by 100. For example, if the feedback limit is 200 and the estimated duration is ten minutes, the
message is issued if the job has been active longer than twenty minutes. The feedback limit specified on the JTOPTS
initialization statement is used in the calculation.
System action: Normal Tivoli OPC processing continues.
User response: Investigate why the job has been active so long. If possible, take corrective action to speed up the
processing of the job.
EQQE039I LONG TIME ON INPUT QUEUE FOR JOB JOBNAME(JNUM), APPL = APPL, WORK STATION = WSID,
IA = ARRTIME
Explanation: This message is issued when a job has been waiting in a job input queue longer than ten minutes.
The message is only issued when the DURATION keyword is specified in the ALERTS statement.
System action: Normal Tivoli OPC processing continues.
User response: Investigate what is keeping the job from starting and take appropriate actions to enable it to start.
EQQE040W OPC CANNOT HANDLE JOB JOBNAME(JOBNUM). THE JOB MAY HAVE TO BE CANCELED
Explanation: Tivoli OPC job tracking has encountered an “add job to JES queue” event for a job whose job name
matches job names defined in the current plan. However, none of the operations with this job name has a status that
is consistent with an “add job to JES queue” event. This message indicates that jobs with Tivoli OPC job names are
being submitted by non-Tivoli OPC functions.
System action: Tivoli OPC assumes that the job is not a Tivoli OPC job and does not track the job. If the job was
held by a Tivoli OPC job tracking exit it is released.
Note: Since this job is not handled by Tivoli OPC, any dependencies this job may have must be manually
implemented.
System programmer response: Determine if Tivoli OPC and non-Tivoli OPC jobs are using the same job names.
Check that all jobs belonging to Tivoli OPC defined applications are defined in the current plan.

Chapter 8. EQQEnnn Messages

EQQE042I EQQE044W

EQQE042I JOBNAME(JOBNUM) WAS NOT SUBMITTED BY OPC BUT WILL BE TRACKED ANYWAY
Explanation: The Event Manager has encountered an event for a job whose job name matches an operation defined
in the current plan. However, Tivoli OPC did not submit this job. This message indicates that jobs with Tivoli OPC
job names are being submitted by non-Tivoli OPC functions.
System action: Tivoli OPC accepts current job as a Tivoli OPC job and continues to track events for this job.
System programmer response: Determine if Tivoli OPC and non-Tivoli OPC jobs are using the same job names. If
Tivoli OPC and non-Tivoli OPC jobs are using the same job names, take appropriate action to minimize such name
conflicts. Inform Tivoli OPC application owners that rerunning applications or adding additional work to the job queue
should be done using the Tivoli OPC Modify Current Plan dialog.
EQQE043W JOB START OR JOB END EVENT RECEIVED FOR JOBNAME(JOBNUM) IS NOT CONSISTENT WITH
CURRENT OPC STATUS OF THIS JOB
Explanation: The Event Manager has received an event for a job on an automatically reporting computer workstation
that conflicts with the information already collected for this operation. For example, a job complete event can only
occur for a job that has started to execute.
System action: The status of the operation is not changed. The Event Manager continues normal operation with the
next queued event.
System programmer response: Use console messages in the MVS SYSLOG dataset, or records in an SMF log
dataset to determine what has happened to this job. If possible, try to locate the SYSMSG dataset for this job.
EQQE044W JOBNAME(JOBNUM) MAY HAVE BEEN STARTED OUT-OF-ORDER. IF REQUIRED, SET CORRECT
STATUS MANUALLY
Explanation: The Event Manager has received a job start event for an operation on an automatically reporting
computer workstation. However, this operation has predecessor operations that have not yet been reported complete.
System action: The status of the operation is not changed. The Event Manager continues normal operation with the
next queued event.
System programmer response: Determine if the job was submitted outside of Tivoli OPC or if it was held and
released manually. Inform all people concerned about the reason for this message and take appropriate action to
make sure that operations are started only after all predecessors are complete.
Operator response: Determine if predecessors to the current operation have completed. If they have, change their
status to complete, and change the status of the current operation to started. If they have not, the current job should
be entered into hold status, and the job should be restarted. After predecessors have completed, the job should be
released from hold.

Tivoli OPC Messages and Codes

EQQE045E EQQE047W

EQQE045E ERRORS OCCURRED READYING SUCCESSOR TO THE FOLLOWING OPERATION: APPLICATION
= APPL, INPUT ARRIVAL = ARRTIME, OPERATION NUMBER = OPNUM THE FAILURE REASON
WAS REASON. THE PROBLEM SUCCESSOR OPERATION: APPLICATION = SAPPL, INPUT
ARRIVAL = SARRTIME, OPERATION NUMBER = SOPNUM
Explanation: OPC changed the status of an operation to Complete but encountered errors when attempting to set
the status to Ready for a successor of the complete operation.
System action: The status is not changed for any of the successor operations. Processing continues.
System programmer response: Review earlier messages in the Tivoli OPC message log to determine the exact
reason for this message. Some possible values for reason are:
R

A VSAM I/O error was encountered when reading the successor operation. See the message reporting the I/O
error for more details.

The successor operation does not list the predecessor as a dependency.

The workstation name for the successor operation is not defined in the current plan.

The status of the successor operation is already complete.

Setting the status of the successor operation to Ready failed. Check the message log for further messages
describing the error.

All of the reasons above indicate an internal OPC error. Save a copy of the active current plan, the job-tracking
archive, and the active job-tracking log. Contact your IBM representative.
Operator response: Check each successor operation to see if all its predecessors are complete. If they are
complete, change the status of the operation to ready using the MCP dialog.
EQQE046W THE EVENT MANAGER WAS UNABLE TO RELEASE JOBNAME(JOBNUM) FROM HOLD
Explanation: The Event Manager was unable to communicate successfully with JES while trying to release a job
from hold.
System action: The hold status of the current job is not changed. The Event Manager continues normal operation
with the next queued event.
System programmer response: Check that JES is executing normally.
Operator response: Check that the job is still held by JES. If it is, enter an appropriate operator command to
release the job from hold.
EQQE047W JOBNAME(JOBNUM) COULD NOT BE RELEASED FROM HOLD BECAUSE THE SUBMIT/RELEASE
DDNAME DDNAME COULD NOT BE LOCATED
Explanation: A job that was held by a Tivoli OPC job tracking exit could not be released from hold because the “add
job to JES queue” event was read by an event reader where the RELDDNAME keyword on the ERDROPTS
statement defines a ddname that is not defined as a submit/release ddname for any workstation defined in the current
plan.
System action: The hold status of the current job is not changed. The Event Manager continues normal operation
with the next queued event.
System programmer response: Determine if the EWTROPTS statement is in error and should be corrected or if a
new current plan containing an additional workstation must be created.
Operator response: Check that the job is still held by JES on the system where it is executing. If it is, enter an
appropriate operator command to release the job from hold.

Chapter 8. EQQEnnn Messages

EQQE048W EQQE055W

EQQE048W JOBNAME(JOBNUM) COULD NOT BE RELEASED FROM HOLD BECAUSE OF ERRORS ON THE
SUBMIT/RELEASE FILE WITH DDNAME DDNAME
Explanation: A job that was held by a Tivoli OPC job tracking exit could not be released from hold because an error
occurred while writing the release command to a submit/release dataset.
System action: The hold status of the current job is not changed. The Event Manager continues normal operation
with the next queued event.
System programmer response: Review earlier messages in the Tivoli OPC message log to determine the exact
reason for this message.
Operator response: Check that the job is still held by JES on the system where it is executing. If it is, enter an
appropriate operator command to release the job from hold.
EQQE049W THE EVENT MANAGER HAS IGNORED THE FOLLOWING USER DEFINED EVENT RECORD
BECAUSE NO MATCHING OPERATION COULD BE FOUND IN CURRENT PLAN: EXITREC
Explanation: An invalid user-defined event record has been found on the Event Manager’s work queue. No
operation in the current plan dataset could be found that matches the operation defined by the event record.
System action: The incorrect event record is returned to the Event Manager’s free queue without any further
processing.
System programmer response: Determine if any user program generates events for an undefined application or for
an undefined operation in a known application.

| EQQE050W THE EVENT MANAGER HAS IGNORED THE FOLLOWING USER DEFINED EVENT RECORD
|
BECAUSE THE JOBNAME JOBNAME IS NOT RECOGNIZED: EXITREC
| Explanation: An invalid user-defined event record has been found on the Event Manager’s work queue. No job
| name has been given, but it is required.
| System action: The incorrect event record is returned to the Event Manager’s free queue without any further
| processing.
| System programmer response: Determine if any user program generates events for an application or for an
| operation without specifying a job name.
EQQE055W THE EVENT MANAGER HAS IGNORED THE FOLLOWING SUBMIT EVENT RECORD BECAUSE NO
MATCHING OPERATION WAS FOUND IN THE CURRENT PLAN: EXITREC
Explanation: The Event Manager’s work queue contains an incorrect submit event. No operation in the current plan
dataset matches the operation defined by the event record. This submit event record is created for work being
scheduled on one of the systems in this Controller's OPC configuration by another Controller having the same name.
System action: The Event Manager continues normal processing.
Problem determination: Check if the current plan has changed significantly since the job defined in the event record
was submitted. Check if the submit event is old, and was sent by a Tivoli OPC subsystem that has been inactive a
long time.
System programmer response: If you cannot determine the reason for this message, contact your IBM
representative.

Tivoli OPC Messages and Codes

EQQE056W EQQE061E

EQQE056W THE EVENT MANAGER HAS IGNORED THE FOLLOWING INVALID EVENT RECORD: EXITREC
Explanation: An invalid event record has been found on the Event Manager’s work queue. The most likely error is
that the last 4 bytes of the record do not contain the Tivoli OPC character string EQQ3. It is also possible that the
first 3 characters of the job number field do not contain the character string JOB.
System action: The incorrect event record is returned to the Event Manager’s free queue without any further
processing.
Tivoli OPC administrator response: Note the job name and job number in the exit record. If necessary, set the
correct status for this job manually.
System programmer response: Save the Tivoli OPC message log dataset (EQQMLOG) containing this message
and contact your IBM representative.
EQQE057W AN INVALID EVENT QUEUE ENTRY HAS CAUSED OPC TO IGNORE THE FOLLOW. EVENT:
EVENT HEADER: EVNTHDR EVENT RECORD: EXITREC
Explanation: An invalid event queue entry has been found on the Event Manager’s work queue. The Event
Manager could not determine the origin of the event. Each event must come from one of sixteen possible event
datasets on each Tivoli OPC node. In the current event queue entry, either the event dataset number or the Tivoli
OPC node number is not valid.
System action: The incorrect event record is returned to the Event Manager’s free queue without any further
processing.
System programmer response: Save the Tivoli OPC message log dataset containing this message and contact
your IBM representative.
EQQE058W THE EVENT MANAGER HAS IGNORED THE FOLLOWING USER DEFINED EVENT RECORD
BECAUSE THE WORK STATION NAME WSNAME IS NOT RECOGNIZED: EXITREC
Explanation: An invalid user-defined event record has been found on the Event Manager’s work queue. The
workstation name in the current event record does not match any workstation definition in the current plan dataset.
System action: The incorrect event record is returned to the Event Manager’s free queue without any further
processing.
System programmer response: Determine if any user program generates events for an undefined workstation or if
a new current plan containing an additional workstation must be created.
EQQE059W THE FOLLOWING USER DEFINED EVENT RECORD CANNOT BE USED BECAUSE WORK
STATION WSNAME IS NOT AN AUTOMATICALLY REPORTING WORK STATION: EXITREC
Explanation: An invalid user-defined event record has been found on the Event Manager’s work queue.
Workstations referenced by user-defined event records must be automatically reporting workstations. The current
workstation does not have this attribute.
System action: The incorrect event record is returned to the Event Manager’s free queue without any further
processing.
System programmer response: Determine if the user program generating the event should reference some other
workstation or if the attributes of the current workstation should be changed.
EQQE061E THE INPUT DATA SET, DDNAME = SYSIN, COULD NOT BE OPENED
Explanation: The EQQEVPGM program could not open the dataset referenced by the SYSIN DD statement, the
statement was not defined correctly, or no SYSIN DD statement was present.
System action: The EQQEVPGM program ends.
User response: Check that the SYSIN DD statement is present and that it is correctly coded. After making
corrections, resubmit the EQQEVPGM batch job.

Chapter 8. EQQEnnn Messages

EQQE062E EQQE068E

EQQE062E EQQEVPGM INITIALIZATION FAILED
Explanation: The EQQEVPGM program found one or more errors during initialization.
System action: The EQQEVPGM program ends.
User response: Review the message log dataset for error messages. Remove the cause of each error and
resubmit the EQQEVPGM batch job.
EQQE063I EQQEVPGM ENDED NORMALLY
Explanation: The EQQEVPGM program has finished processing. No errors were found during execution.
System action: The EQQEVPGM program ends.
User response: None.
EQQE064E EQQEVPGM TERMINATED BECAUSE OF UNRECOVERABLE ERRORS
Explanation: A severe error occurred during execution of the EQQEVPGM program.
System action: The EQQEVPGM program ends.
User response: Review the message log dataset and the SYSUDUMP dataset to determine the cause of the error.
After making corrections, resubmit the EQQEVPGM batch job. If you cannot determine the cause of the error and if
the error persists, contact your IBM representative.
EQQE065I THE EQQEVPGM PROGRAM HAS STARTED
Explanation: The EQQEVPGM program has been correctly initialized and is about to start generating events.
System action: EQQEVPGM processing continues normally.
User response: None.
EQQE066E SUBSYS IS NOT A VALID SUBSYSTEM NAME. NO EVENT IS CREATED
Explanation: The SUBSYS keyword contains an invalid subsystem name.
System action: The event is not created. The EQQEVPGM program continues processing the next event creation
statement.
User response: If the event should be created, make the necessary corrections and resubmit the EQQEVPGM
batch job.
EQQE067E A SUBSYSTEM REQUEST ERROR (R15 = R15) OCCURRED. NO EVENT IS CREATED
Explanation: An error occurred when attempting to send an event to a Tivoli OPC subsystem.
System action: The event is not created. The EQQEVPGM program continues processing the next event creation
statement.
User response: If R15 is 4, the SUBSYS keyword does not define a Tivoli OPC subsystem. If R15 is 8, the
SUBSYS keyword either does not define a Tivoli OPC subsystem or it defines a Tivoli OPC subsystem that has not
been properly installed. Make the necessary corrections and resubmit the EQQEVPGM batch job. If R15 is 12, 16 or
20, contact your IBM representative.
EQQE068E A SUBSYSTEM ERROR (SSOBRETN = RETN) OCCURRED. NO EVENT IS CREATED
Explanation: An error occurred when attempting to send an event to a Tivoli OPC subsystem.
System action: The event is not created. The EQQEVPGM program continues processing the next event creation
statement.
User response: Contact your IBM representative.

Tivoli OPC Messages and Codes

EQQE069E EQQE073E

EQQE069E ERRORS ENCOUNTERED IN EVENT DEFINITION STATEMENTS. ONE OR MORE EVENTS HAVE
NOT BEEN CREATED
Explanation: The EQQEVPGM program found one or more incorrectly coded event definition statements.
System action: The EQQEVPGM program ends.
User response: If the events should be created, make the necessary corrections and resubmit the EQQEVPGM
batch job.
EQQE070E THE SPECIAL RESOURCE NAME GIVEN IS TOO LONG. MAXIMUM SIZE IS 44 CHARACTERS
Explanation: The special resource name defined by the SRSTAT event definition statement is too long.
System action: The event is not created. The EQQEVPGM program continues processing the next event creation
statement.
User response: If the event should be created, make the necessary corrections and resubmit the EQQEVPGM
batch job.
EQQE071E A SPECIAL RESOURCE NAME IS REQUIRED ON THE SRSTAT STATEMENT
Explanation: The current SRSTAT event definition statement does not define any special resource name. This
name is required.
System action: The event is not created. The EQQEVPGM program continues processing the next event creation
statement.
User response: If the event should be created, make the necessary corrections and resubmit the EQQEVPGM
batch job.
EQQE072E YOU ARE NOT AUTHORIZED TO UPDATE SPECIAL RESOURCES FOR SUBSYSTEM SUBSYS
Explanation: In order to change a special resource for a Tivoli OPC subsystem, update authority to the SR resource
is necessary. You do not have this authority.
System action: If you specified SUBSYSTEM(MSTR) in the command, no event is created for this subsystem.
However, EQQEVPGM tries to create an event for the next active Tivoli OPC subsystem in this MVS system. If you
are authorized to update one or more of the Tivoli OPC subsystems, the statement return code is set to 4. Otherwise,
it is set to 8. After scanning all active Tivoli OPC subsystems, EQQEVPGM continues processing the next event
creation statement.
If you specified a unique Tivoli OPC subsystem name instead of MSTR, no event is created for the subsystem
specified. The statement return code is set to 8. The EQQEVPGM program continues processing the next event
creation statement.
User response: Contact your security administrator.
EQQE073E YOU ARE NOT AUTHORIZED TO UPDATE THE CURRENT PLAN FOR SUBSYSTEM SUBSYS
Explanation: In order to create an operation or workstation event for a Tivoli OPC subsystem, update authority to
the RL resource is necessary. You do not have this authority.
System action: If you specified SUBSYSTEM(MSTR) in the command, no event is created for this subsystem.
However, EQQEVPGM tries to create an event for the next active Tivoli OPC subsystem in this MVS system. If you
are authorized to update one or more of the Tivoli OPC subsystems, the statement return code is set to 4. Otherwise,
it is set to 8. After scanning all active Tivoli OPC subsystems, EQQEVPGM continues processing the next event
creation statement.
If you specified a unique Tivoli OPC subsystem name instead of MSTR, no event is created for the subsystem
specified. The statement return code is set to 8. The EQQEVPGM program continues processing the next event
creation statement.
User response: Contact your security administrator.

Chapter 8. EQQEnnn Messages

EQQE074E EQQE077E

EQQE074E THE EVENT CREATION DATE SPECIFIED BY THE EVDATE KEYWORD IS NOT VALID
Explanation: The EVDATE keyword contains an invalid date. The date must be specified in the format YYMMDD
where:
YY
MM
DD

Is year and must specified as 72 to 99 for years 1972 to 1999 or 00 to 71 for years 2000 to 2071.
Is the month number and must be in the range 01 to 12.
Is the day number and must be in the range 01 to 31.

System action: The event is not created. The EQQEVPGM program continues processing the next statement.
User response: If the event should be created, correct the EVDATE keyword and resubmit the EQQEVPGM batch
job.
EQQE075E THE EVENT CREATION TIME SPECIFIED BY THE EVTIME KEYWORD IS NOT VALID
Explanation: The EVTIME keyword contains an invalid time-of-day value. The time must be specified in the format
HHMMSS, where:
HH
MM
SS

Is a two-digit hour number. It must be in the range 00–23.
Is a two-digit minute number. It must be in the range 00–59.
Is a two-digit second number. It must be in the range 00–59.

System action: The event is not created. The EQQEVPGM program continues processing the next statement.
User response: If the event should be created, make the necessary corrections and resubmit the EQQEVPGM
batch job.
EQQE076E THE INPUT ARRIVAL TIME SPECIFIED BY THE IA KEYWORD IS NOT VALID
Explanation: The IA keyword contains an invalid input arrival value. The value must be specified in the format
YYMMDDHHMM where:
YYMMDD

HHMM

Is the input arrival date:
YY
Is the year. It must in the range 72–99 for years 1972 through 1999 or 00–71 for years 2000
through 2071.
MM
Is the month number. It must be in the range 01–12.
DD
Is the day number. It must be in the range 01–31.
Is the input arrival time:
HH
Is the hour. It must be in the range 00–23.
MM
Is the minute. It must be in the range 00–59.

System action: The event is not created. The EQQEVPGM program continues processing the next statement.
User response: If the event should be created, correct the IA keyword and resubmit the EQQEVPGM batch job.

| EQQE077E WORK STATION NAME, APPLICATION DESCRIPTION OR JOB NAME MUST BE SPECIFIED
| Explanation: The current OPSTAT or WSSTAT event definition statement does not define any workstation name,
| application description, or job name. These items are required.
System action: The event is not created. Processing ends if it was invoked by a current TSO command. If the
command was invoked by the EQQEVPGM program, processing continues with the next statement.
User response: If the event should be created, make the necessary corrections and reissue the command.

Tivoli OPC Messages and Codes

EQQE078E EQQE082E

EQQE078E THE EVENT DURATION TIME SPECIFIED BY THE DURATION KEYWORD IS NOT VALID
Explanation: The DURATION keyword contains an invalid duration value. Event duration must be specified in the
format HHMM, where:
HH
MM

Is a two-digit hour number. It must be in the range 00–99.
Is a two-digit minute number. It must be in the range 00–59.

System action: The event is not created. The EQQEVPGM program continues processing the next statement.
User response: If the event should be created, make the necessary corrections and resubmit the EQQEVPGM
batch job.
EQQE079E KEYWORD KEY HAS AN INVALID VALUE
Explanation: The only valid values for the CREATE and AVAIL keywords are YES, NO, or RESET or abbreviations
of YES, NO, or RESET.
System action: The event is not created. Processing ends for current SRSTAT command. If SRSTAT is invoked by
the EQQEVPGM program, processing continues with the next statement.
User response: If the event should be created, make the necessary corrections and reissue the SRSTAT command.
EQQE080E THE EQQMINOR PROGRAM ABENDED WITH ABEND CODE ABEND
Explanation: This message is issued when a Tivoli OPC TSO command has failed due to an error when
communicating with the Tivoli OPC subsystem.
Problem determination: If necessary, generate a dump by allocating a SYSxDUMP dataset to the TSO user's
address space, or by defining a slip trap, and reissue the failing command.
User response: Contact your systems programmer.
System programmer response: If the failing command contains an error, correct it and retry. If the error cannot be
corrected, contact your IBM representative for assistance.
EQQE081E R15 RETURN CODE R15 WAS RETURNED BY THE TSO SERVICE FACILITY. RETURN CODE RC,
REASON CODE RSN WERE ALSO RETURNED
Explanation: This message is issued when a Tivoli OPC TSO command has failed due to an error when
communicating with the Tivoli OPC subsystem.
System action: The Tivoli OPC service requested has not been executed.
User response: Contact your systems programmer.
System programmer response: If the failing command contains an error, correct it and retry. If the error cannot be
corrected, contact your IBM representative for assistance.
EQQE082E THE OPC SUBSYSTEM SUBSYS IS NOT INITIALIZED. NO EVENT IS CREATED
Explanation: A Tivoli OPC TSO command or EQQEVPGM has failed because the Tivoli OPC subsystem SUBSYS
has not been initialized. Tivoli OPC subsystems are initialized during an MVS IPL.
System action: No event is created.
Problem determination: Check the system log for error messages issued during IPL that identify why the Tivoli
OPC subsystem was not initialized.
User response: If the command referred to the wrong subsystem correct the input, and retry the command.
System programmer response: If the Tivoli OPC subsystem should be initialized the EQQINITD program must be
executed successfully. Ensure EQQINITD is located in a library in the LNKLSTnn concatenation and IPL the MVS
system.

Chapter 8. EQQEnnn Messages

EQQE083E EQQE089E

EQQE083E SUBSYSTEM SUBSYS IS NOT AN OPC SYSTEM. NO EVENT IS CREATED
Explanation: This message is issued when a Tivoli OPC TSO command has failed because the subsystem that was
referenced is not a Tivoli OPC subsystem.
System action: None.
User response: Correct the command and retry.
EQQE084E YOU ARE NOT AUTHORIZED TO UPDATE THE SPECIAL RESOURCE SPECIFIED FOR SUBSYSTEM
SUBSYS
Explanation: An SRSTAT request to update a special resource specified for subsystem SUBSYS failed because the
user making the request was not authorized to update the resource.
System action: The request is rejected.
User response: Contact your security administrator if access is required.
EQQE085E RESDS IS NOT A VALID RESOURCE DATASET NAME, NO EVENT IS CREATED
Explanation: The value specified for the resource dataset keyword—RESDS was not valid. The keyword value must
be specified as CP or JS.
System action: The request is ignored.
User response: Correct the input and resubmit the request.
EQQE086E THE RESDS KEYWORD MUST BE SPECIFIED
Explanation: The resource dataset keyword—RESDS was not specified.
System action: The request is ignored.
User response: Supply the RESDS keyword and a valid value and resubmit the request.
EQQE087E YOU ARE NOT AUTHORIZED TO REQUEST A BACKUP OF THE RESDS RESOURCE DATASET
SPECIFIED FOR SUBSYSTEM SUBSYS
Explanation: In order to request a backup of a Tivoli OPC resource dataset, update authority to the BKP fixed
resource is required. You do not have this authority.
System action: The request is ignored.
User response: If authority is required contact your security administrator.
EQQE088E YOU ARE NOT AUTHORIZED TO UPDATE THE OPERATION, SUBRES CHECK FAILED AT
SUBSYSTEM SUBSYS
Explanation: An OPSTAT requests to update an operation in subsystem SUBSYS failed because the user making
the request was not authorized to update the SUBRES subresource.
System action: The request is rejected.
User response: If authority is required contact your security administrator.
EQQE089E YOU ARE NOT AUTHORIZED TO UPDATE STATUS OF WORKSTATION WSNAME FOR
SUBSYSTEM SUBSYS
Explanation: A WSSTAT request to update the status of workstation WSNAME in subsystem SUBSYS failed
because the user making the request was not authorized to update the RL.WSSTAT subresource.
System action: The request is rejected.
User response: If authority is required contact your security administrator.

Tivoli OPC Messages and Codes

EQQE090E EQQE094E

EQQE090E EITHER WORKSTATION NAME OR DESTINATION MUST BE SPECIFIED
Explanation: The current WSSTAT statement does not define a workstation name (WSNAME) or a destination ID
(DESTINATION). At lease one of WSNAME or DESTINATION must be specified. Both can be specified.
System action: The event is not created. The EQQEVPGM program continues processing any further event
creation statements.
User response: If the event should be created, make the necessary corrections and reissue the command or
resubmit the EQQEVPGM batch job.
EQQE091E THE FOLLOWING USER DEFINED EVENT RECORD CANNOT BE USED BECAUSE THE OPCTOKEN
VALUE IS NOT CONSISTENT WITH THE VALUE(S) SPECIFIED IN THE ADID, IA, JOBNAME AND/OR
OPNUM KEYWORDS: EXITREC
Explanation: An invalid user-defined event record has been found on the Event Manager's work queue. An
OPSTAT event definition statement defined an OPCTOKEN value that is not consistent with some or all of the values
specified in the ADID, IA, JOBNAME, AND OPNUM keywords. The operation cannot be identified by OPC.
System action: The incorrect event record is returned to the Event Manager's free queue without any further
processing.
User response: If a new event should be created, make the necessary corrections and reissue the command or
resubmit the EQQEVPGM batch job.

| EQQE092E THE FOLLOWING USER DEFINED EVENT RECORD CANNOT BE USED BECAUSE THE CURRENT
|
OPERATION STATUS IS NOT STARTED, READY OR ARRIVING: EXITREC
Explanation: An invalid user-defined event record has been found on the Event Manager's work queue. An

| OPSTAT event definition statement specified a new status of SQ or SS, but the current operation status is not started
| (S), ready (R), or arriving (A).
System action: The incorrect event record is returned to the Event Manager's free queue without any further
processing. The operation status is not changed.
User response: If a new event should be created, make the necessary corrections and reissue the command or
resubmit the EQQEVPGM batch job.
EQQE093E THE FOLLOWING USER DEFINED EVENT RECORD CANNOT BE USED BECAUSE THE
WORKSTATION WSNAME IS NOT A COMPUTER OR WTO WORKSTATION: EXITREC
Explanation: An invalid user-defined event record has been found on the Event Manager's work queue. An event
generated by WSSTAT or EQQUSINW specified a workstation that is not a computer, or WTO workstation.
System action: The incorrect event record is returned to the Event Manager's free queue without any further
processing. The workstation status is not changed.
User response: If a new event should be created, make the necessary corrections and reissue the command or
resubmit the EQQEVPGM batch job.
EQQE094E THE FOLLOWING USER DEFINED EVENT RECORD CANNOT BE USED BECAUSE THE
WORKSTATION WSNAME DOES NOT MATCH THE DESTINATION DEST: EXITREC
Explanation: An invalid user-defined event record has been found on the Event Manager's work queue. An
WSSTAT event definition statement specified a workstation that did not match the destination specified in the event.
System action: The incorrect event record is returned to the Event Manager's free queue without any further
processing. The workstation status is not changed.
User response: If a new event should be created, make the necessary corrections and reissue the command or
resubmit the EQQEVPGM batch job.

Chapter 8. EQQEnnn Messages

EQQE095E EQQE099E

EQQE095E THE FOLLOWING USER DEFINED EVENT RECORD CANNOT BE USED BECAUSE THE
DESTINATION DEST IS NOT SPECIFIED IN THE ROUTOPTS INITIALIZATION STATEMENT:
EXITREC
Explanation: An invalid user-defined event record has been found on the Event Manager's work queue. An
WSSTAT event definition statement specified a destination which was not specified in the ROUTOPTS initialization
statement.
System action: The incorrect event record is returned to the Event Manager's free queue without any further
processing. The workstation status is not changed.
User response: If a new event should be created, make the necessary corrections and reissue the command or
resubmit the EQQEVPGM batch job.
EQQE096E THE STATUS KEYWORD MUST BE SPECIFIED
Explanation: The current WSSTAT event definition statement does not define any status. This keyword is required.
System action: The event is not created. The EQQEVPGM program continues processing the next event creation
statement.
User response: If the event should be created, make the necessary corrections and resubmit the EQQEVPGM
batch job.
EQQE097E THE FOLLOWING USER DEFINED EVENT RECORD CANNOT BE USED BECAUSE THE SPECIFIED
TOKEN VALUE DOES NOT MATCH ANY OPERATION IN THE CURRENT PLAN: EXITREC
Explanation: An invalid user-defined event record has been found on the Event Manager's work queue. An
OPSTAT event definition statement defined a TOKEN value that does not match any operation in the current plan.
The operation cannot be identified by OPC.
System action: The incorrect event record is returned to the Event Manager's free queue without any further
processing.
User response: If a new event should be created, make the necessary corrections and reissue the command or
resubmit the EQQEVPGM batch job.
EQQE098E THE FOLLOWING USER DEFINED EVENT RECORD CANNOT BE USED BECAUSE THE CURRENT
OPERATION STATUS IS SS: EXITREC
Explanation: An invalid user-defined event record has been found on the Event Manager's work queue. An
OPSTAT event definition statement specifies a new status Q for an operation which has a current status SS. This is
not allowed
System action: The incorrect event record is returned to the Event Manager's free queue without any further
processing. The workstation status is not changed.
User response: If a new event should be created, make the necessary corrections and reissue the command or
resubmit the EQQEVPGM batch job.
EQQE099E THE FOLLOWING USER DEFINED EVENT RECORD CANNOT BE USED BECAUSE THE
ALTERNATE WORKSTATION WSNAME DOES NOT EXIST: EXITREC
Explanation: An invalid user-defined event record has been found on the Event Manager's work queue. A WSSTAT
event definition statement specified an alternative workstation that did not exist.
System action: The incorrect event record is returned to the Event Manager's free queue without any further
processing. The workstation status is not changed.
User response: If a new event should be created, make the necessary corrections and reissue the command or
resubmit the EQQEVPGM batch job.

100

Tivoli OPC Messages and Codes

EQQE100E EQQE104E

EQQE100E THE CURRENT WORKSTATION WSNAME CANNOT BE USED AS ALTERNATE TO ITSELF.
REROUTE IS NOT IN EFFECT FOR THE WORKSTATION
Explanation: A WSSTAT event definition statement specified an alternative workstation that was the same as the
current workstation.
System action: Reroute is not in effect for the actual workstation. The workstation status is changed.
User response: None.
EQQE101E KEYWORD KEY HAS AN INVALID VALUE
Explanation: The only valid values for the QUANTITY and DEVIATION keywords are KEEP, RESET or a numeric
value.
System action: The event is not created. Processing ends for current SRSTAT command. If SRSTAT is invoked by
the EQQEVPGM program, processing continues with the next event creation statement.
User response: If the event should be created, make the necessary corrections and reissue the SRSTAT command.
EQQE102W PULSE LOST FROM TRACKER SUBS AT DESTINATION DEST
Explanation: This message indicates that handshake processing, the frequency for which is determined by the
PULSE keyword of the ROUTOPTS statement, has terminated for the indicated Tracker system. When handshake
processing is in use, each connected Tracker system sends an identification (ID) event to the controller at the
specified interval. If the controller detects that a Tracker system has missed two consecutive PULSE intervals, this
message is issued. SUBS is the name of the Tracker (the subsystem name for MVS trackers). DEST is the
destination for this system, as defined in the ROUTOPTS statement.
System action: If the destination DEST is defined using shared DASD (submit/release) dataset communication, this
destination is forced Offline by the Tivoli OPC controller. For other communication methods, no action is taken.
System programmer response: Check that the destination is active. If it is, check that the event writer at the
destination is active.
EQQE103W TRACKER SUBS AT DESTINATION DEST LOST THE FUNC
Explanation: This message is issued for reporting purposes on the controller message log, EQQMLOG, when the
ROUTOPTS PULSE processing is active for Tracker systems on Tivoli OPC release 3 level or higher. The message
indicates that the FUNC subtask in the SUBS subsystem on the MVS system represented in Tivoli OPC by the DEST
destination has abnormally terminated.
System action: No action is taken by the controller.
System programmer response: Check the message log for the indicated Tracker address space and take
appropriate actions to restart the failed subtask.
EQQE104E KEYWORD KEYW MISSING. IT IS REQUIRED FOR SUBRESOURCE SUBRES CHECKING AT
SUBSYSTEM SUBSYS

|
|
|

Explanation: Authority checking for subresource SUBRES is specified in the AUTHDEF statement for subsystem
SUBSYS. A valid subresource name cannot be built for protection of the operation when keyword KEYW is omitted.
When EQQEVPGM processes a TSO command, for example, OPINFO, OPSTAT, JSUACT or WSSTAT, it checks the
authority of the requestor analyzing the contents of AUTHDEF statements of OPC. To do this check it also necessary
that a certain keyword KEYW should be specified in the previous TSO statement.
System action: No event is created for the subsystem identified in the message text. If SUBSYSTEM(MSTR) was
specified in the input, the request is directed to the next OPC subsystem. If event creation failed for one or more
subsystems, return code 4 is set. If it failed for all subsystems or for a subsystem specifically identified in the input,
return code 8 is set.
System programmer response: Add the keyword and resubmit the EQQEVPGM job for the failing subsystem.

Chapter 8. EQQEnnn Messages

101

EQQE105W EQQE203I

| EQQE105W DATA STORE FUNCTIONALITY IS ACTIVE ON CONTROLLER BUT NOT ON TRACKER
| Explanation: The controller is running with DSTTASK(YES), that is, SYSOUT retrieval is done via the OPC Data
| Store, but a minimum of one tracker is running in an environment where the Data Store is not active.
| System action: None
| User response: Contact your system programmer.
| System programmer response: Check that the EQQSSCMx level of code is correct.
| EQQE106I UNABLE TO UPDATE OPER DOA: APPL=APPL, INPUT ARR=ARRTIME, OPNR=OPNU
| Explanation: An error occurred during the DOA updating of the operation.
| System action: The extended status passed to EQQUX007 is set to Z.
| User response: None.
| EQQE107I OPC-WLM SUCCESSFULLY PROMOTED JBNAM: JBNUM IN HI PERFORMANCE CLASS
| Explanation: The job promotion process has ended correctly. The job is now in a higher-performance service class
| defined for OPC jobs.
| System action: None.
| User response: None.
| EQQE200W JSUACT REQUEST IGNORED. SUBTASK HAS TERMINATED.
| Explanation: The job submit activate/deactivate command has been ignored because the controller normal mode
| manager (NMM) task has terminated.
| System action: The request is rejected.
| User response: Review the OPC message log for messages that could explain why NMM is unavailable.
| EQQE201W SUBMIT FUNCTION ALREADY ACTIVE
| Explanation: The job submit activate command has been ignored because the job submit function is already active
| and enabled for service.
| System action: The request is ignored.
| User response: None.
| EQQE202W SUBMIT FUNCTION ALREADY INACTIVE
| Explanation: The job submit deactivate command has been ignored because the job submit function is already
| inactive and disabled for service.
| System action: The request is rejected.
| User response: None.
| EQQE203I SUBMIT FUNCTION ACTIVATED
| Explanation: The job submit activate command has been accepted and executed.
| System action: None.
| User response: None.

102

Tivoli OPC Messages and Codes

EQQE204I EQQE204I

| EQQE204I SUBMIT FUNCTION DEACTIVATED
| Explanation: The job submit deactivate command has been accepted and executed.
| System action: None.
| User response: None.

Chapter 8. EQQEnnn Messages

103

104

Tivoli OPC Messages and Codes

EQQF000E EQQF004E

Chapter 9. EQQFnnn Messages
EQQF000E DATA ROUTER TASK HAS IGNORED AN INVALID QUEUE ELEMENT: DQE
Explanation: A queue element did not contain the correct eye catcher or version number.
System action: The data router task does not process the invalid element, but continues normal processing.
User response: Contact your system programmer.
System programmer response: Save the Tivoli OPC message log and contact your IBM representative.
EQQF001I DATA ROUTER TASK INITIALIZATION IS COMPLETE
Explanation: The data router task has successfully completed initialization.
System action: Data router task processing starts.
User response: None.
EQQF002E DATA ROUTER TASK INITIALIZATION FAILED
Explanation: The data router task could not acquire the resources required for normal operation.
System action: Data router task processing is terminated.
Problem determination: Review previous messages in the Tivoli OPC message log.
User response: Contact your system programmer.
System programmer response: Correct all errors and restart the data router task.
EQQF003E MEMBER MEMBER IS DEFINED AS A DESTINATION IN ROUTOPTS BUT IS STARTED AS A
STANDBY SYSTEM
Explanation: An XCF member has joined the same XCF group as the controller. This member was defined as a
tracker in the ROUTOPTS but has been started as a Tivoli OPC standby subsystem.
System action: Tivoli OPC does not recognize the joined standby member as a destination. No communication
takes place between the controller and the standby member.
Problem determination: Check the ROUTOPTS initialization statement and the initialization statement defined for
the member.
User response: Contact your system programmer.
System programmer response: Restart the standby system as a tracker or update the controller ROUTOPTS
statement.
EQQF004E DATA ROUTER TASK ABENDED WHEN PROCESSING THE FOLLOWING QUEUE ELEMENT DQE
Explanation: An abend prevented the data router task from processing a queue element.
System action: MVS recovery/termination is requested to generate a dump. The data router task attempts to
continue normal processing.
Problem determination: Review the Tivoli OPC message log dataset, the EQQDUMP dataset, and the SYSMDUMP
dataset to determine the cause of the problem.
User response: Contact your system programmer.
System programmer response: Save the message log and dump datasets and contact your IBM representative.

 Copyright IBM Corp. 1991, 1999

105

EQQF005E EQQF008I

EQQF005E DATA ROUTER TASK QUEUE POINTERS ARE DESTROYED, RTRQ IS LOST
Explanation: The data router task abended while processing elements on RTRQ because the queue chaining is
invalid.
System action: MVS recovery/termination is requested to generate a dump. All elements on RTRQ are skipped, but
the data router task attempts to continue normal processing.
Problem determination: Review the Tivoli OPC message log dataset, the EQQDUMP dataset, and the SYSMDUMP
dataset to determine the cause of the problem.
Tivoli OPC administrator response: Save the message log and dump datasets and contact your IBM
representative.
EQQF006I UNKNOWN XCF MEMBER MEMBER HAS JOINED THE GROUP. IT IS IGNORED
Explanation: A member that is not defined in ROUTOPTS has joined the XCF group.
System action: The controller ignores the joined member. No workload or event communication between the
controller and the tracker takes place.
Problem determination: Check the XCFOPTS initialization statement of the Tivoli OPC tracker system and check
the ROUTOPTS initialization statement of the controller.
Tivoli OPC administrator response: Verify that the tracker system has been defined with an XCF member name
that corresponds to the definition in ROUTOPTS. Add the member name to ROUTOPTS and restart the controller.
EQQF007I XCF MEMBER MEMBER HAS JOINED THE GROUP. THE DESTINATION WILL BE REPORTED
ACTIVE
Explanation: A Tivoli OPC tracker system has joined the same XCF group as the controller. The member is defined
as an XCF destination in the ROUTOPTS initialization statement.
System action: The controller reports the destination as active. Work can be scheduled at workstations defining this
destination.
User response: None
EQQF008I XCF MEMBER MEMBER HAS JOINED THE GROUP AS STANDBY FOR THE OPC CONTROLLER
Explanation: A Tivoli OPC standby subsystem has joined the same group as the controller.
System action: Controller processing continues as normal.
User response: None

106

Tivoli OPC Messages and Codes

EQQF009I EQQF012I

EQQF009I ADAPTIVE PACING ON EVENT INFLOW MODE
Explanation: The MODE can be ACTIVATED or DEACTIVATED.
ACTIVATED

The data router has detected that the maximum number of queue elements on the event manager
queue (MGRQ) were already in use when the data router task attempted to add incoming events to
the MGRQ. The data router task has posted each locally attached event reader task and event
writer task (when EWSEQNO(n)), to stop reading from the event datasets or adding to the DRTQ.
The data router task has also built and sent a DQE request (type RTQ) to each remote (NCF or
XCF) linked tracker, where the remote data router task posts each attached event reader task and
event writer task (when EWSEQNO(n)), to stop reading from the event datasets or adding to the
DRTQ.

DEACTIVATED The data router task has detected that the event manager has processed all events on the event
manager queue (MGRQ), so the data router task has posted each locally attached event reader task
and event writer task (when EWSEQNO(n)), to start reading from the event datasets or adding to the
DRTQ. The data router task has also built and sent a DQE request (type RTQ) to each remote
(NCF and/or XCF) linked tracker, where the remote data router task posts each attached event
reader task and event writer task (when EWSEQNO(n)), to start reading from the event datasets or
adding to the DRTQ.
System action:

Tivoli OPC processing continues.

User response: None. This message is for information only.
EQQF010I INVALID RETURN CODE RETC FROM EQQUX009 IS IGNORED
Explanation: User exit EQQUX009 passed an invalid return code back to the data router task. The return code is
ignored.
System action: Normal processing continues. The return code is treated as return code 0.
User response: Inform your system programmer.
System programmer response: Investigate why EQQUX009 returned an invalid return code.
EQQF011E THE OPERATION INITIALIZATION EXIT USRX HAS ABENDED WHILE PROCESSING OPERATION
OPN IN APPLICATION APPL WITH IA IA SCHEDULED ON WORKSTATION WSNAME. THE EXIT IS
MARKED AS NOT USABLE.
Explanation: The exit abended while processing. Tivoli OPC does not try to call it again unless the data router task
is restarted. The exit is flagged as not executable.
System action: The current operation status is set according to what is specified in the SUBFAILACTION JTOPTS
parameter.
System programmer response: Correct all errors in the exit and restart the data router task.
EQQF012I PROCESSING RETURN CODE RETC FROM EQQUX009
Explanation: User exit EQQUX009 passed a return code, RETC, that is not 0. The data router task processes the
return codes and continues normal processing.
System action: The return code is processed as follows:
4
8

The current operation status is set according to the specification in the SUBFAILACTION keyword in the
JTOPTS initialization statement.
The operation status is set according to the specification in the SUBFAILACTION keyword in the JTOPTS
initialization statement. All workstations specifying the destination are set to offline status.

User response: Inform your system programmer.
System programmer response: Investigate why EQQUX009 returned the return code.

Chapter 9. EQQFnnn Messages

107

EQQF013I EQQF015I

EQQF013I EXIT EQQUX009 IS NOT LOADED OR HAS BEEN DISABLED
Explanation: User exit EQQUX009 has not been loaded or has abended previously. The operations scheduled to
run on a workstation that specifies a user-defined destination are routed.
System action: The operation status is set according to what is specified in the SUBFAILACTION keyword on the
JTOPTS initialization parameter.
User response: Issue a WSSTAT command, or use the workstation dialog, to vary the destination workstations
offline.
System programmer response: Investigate why EQQUX009 is not loaded. If a previous abend caused the exit to
be disabled, correct the error and stop/start the Tivoli OPC subsystem to get the exit reloaded.
EQQF014E THE EXTERNAL ROUTER QUEUE IS FULL. USER DESTINATION WILL BE SET TO OFFLINE
STATUS
Explanation: The external router queue is full. Tivoli OPC sets the destination to offline status and sets the
corresponding operation to the status specified in the SUBFAILACTION keyword value in the JTOPTS initialization
statement.
System action: The current operation status is set according to what is specified in the SUBFAILACTION JTOPTS
parameter.
System programmer response: Investigate why the EQQUX009 exit is not processing.
EQQF015I XCF TYPE MEMBER MEMBER HAS LEFT THE GROUP. REASON: REASON
Explanation: The XCF link to TYPE with member name MEMBER has been disconnected. The REASON is either
that the linked Tivoli OPC address space terminated or the entire MVS/ESA system terminated.
System action: The transmission of data (such as event records) through the XCF link is postponed. The
transmission of data resumes when the XCF member rejoins the group.
Problem determination: If this message is not expected, review the message log (EQQMLOG) and the SYSLOG of
the linked Tivoli OPC MEMBER to determine the cause of the outage.
User response: Contact your system programmer.
System programmer response: This is a Tivoli OPC informational message.
If this message was expected and:
The TYPE indicated CONTROLLER and message EQQW070I was also issued when the controller was restarted,
you should consider increasing the size of the tracker's event dataset.
The TYPE indicated TRACKER and message EQQZ035I was also issued when the tracker was restarted, you
should consider increasing the size of the ECSA buffer (SYS1.PARMLIB(IEFSSNxx)).

108

Tivoli OPC Messages and Codes

EQQFL00E EQQFL10E

Chapter 10. EQQFLnn Messages

| EQQFL00E JOB LOG FETCH TASK HAS IGNORED AN INVALID QUEUE ELEMENT: DQE
| Explanation: A queue element did not contain the correct eye catcher or version number.
| System action: The job log fetch task does not process the invalid element, but continues normal processing.
| User response: Contact your system programmer.
| System programmer response: Save the Data Store job log task message log and contact your IBM
| representative.
| EQQFL01I JOB LOG FETCH TASK INITIALIZATION COMPLETE
| Explanation: The job log fetch task has successfully completed its initialization.
| System action: Job log fetch processing is available.
| EQQFL02E JOB LOG FETCH TASK INITIALIZATION FAILED
| Explanation: The job log fetch task could not acquire all the resources needed for normal operation.
| System action: The job log fetch task is not started and all other active tasks are closed.
| Problem determination: Review earlier messages in the Data Store message log to determine the cause of the
| error.
| System programmer response: Correct the errors and restart the submit task.
| EQQFL04E JOB LOG FETCH ABENDED WHEN PROCESSING THE FOLLOWING QUEUE ELEMENT DQE
| Explanation: An abend prevented the job log fetch task from processing a queue element.
| System action: MVS recovery/termination is requested to generate a dump. The job log fetch task attempts to
| continue normal processing.
| Problem determination: Review the Data Store message log dataset, the EQQDUMP dataset, and the SYSDUMP
| dataset to determine the cause of the error.
| User response: Contact your system programmer.
| System programmer response: Save the message log and dump datasets and contact your IBM representative.
| EQQFL05E JOB LOG FETCH QUEUE POINTER IS DESTROYED. ARCQ IS LOST
| Explanation: The job log fetch task abended while processing elements on the DSCQ because queue chaining is
| invalid.
| System action: MVS recovery/termination is requested to generate a dump. The job log fetch task attempts to
| continue normal processing.
| Problem determination: Review the Data Store message log dataset, the BEX diagnostic dataset, and the dump
| dataset to determine the cause of the problem.
| User response: Contact your systems programmer.
| System programmer response: Save the message log, BEX and dump datasets, and contact your IBM
| representative.
| EQQFL10E IN XCF ENVIRONMENT BOTH DSTGROUP AND CTLMEM ARE MANDATORY
| Explanation: DSTGROUP and CTLMEM are not specified in the FLOPTS statement of the controller initial
| parameter statement. If you specify the XCFDEST parameter, they are both mandatory.
| System action: The Data Store does not start.
| System programmer response: Correct the error and restart the Data Store.
 Copyright IBM Corp. 1991, 1999

109

EQQFL11E EQQFL17E

| EQQFL11E CTLLUNAM AND DSTGROUP/CTLMEM ARE MUTUALLY EXCLUSIVE
| Explanation: CTLLUNAM and DSTGROUP or CTLMEM parameters are specified together in the FLOPTS statement
| of the controller initial parameter statement. They are mutually exclusive.
| System action: The FL task does not start.
| System programmer response: Correct the error and restart the FL task
| EQQFL12E SNADEST OR XCFDEST MISSING
| Explanation: SNADEST or XCFDEST is not specified in the FLOPTS statement of the controller initial parameter
| statement. One of them is mandatory.
| System action: The FL task does not start.
| System programmer response: Correct the error and restart the FL task
| EQQFL13E CONFLICT DETECTED BETWEEN CTLLUNAM AND SNADEST VALUES
| Explanation: The same name is specified in the FLOPTS statement for the CTLLUNAM and SNADEST parameters
| or for the CTLMEM and XCFDEST parameters. Home and destination must have different names.
| System action: The FL task does not start.
| System programmer response: Correct the error and restart the FL task
| EQQFL14E SNADEST SPECIFIED IN XCF ENVIRONMENT
| Explanation: SNADEST and DSTGROUP or CTLEM are specified together in the FLOPTS statement of the
| controller initial parameter statement. They are mutually exclusive.
| System action: The FL task does not start.
| System programmer response: Correct the error and restart the FL task
| EQQFL15E XCFDEST SPECIFIED IN SNA ENVIRONMENT
| Explanation: XCFDEST and CTLLUNAM are specified together in the FLOPTS statement of the controller initial
| parameter statement. They are mutually exclusive.
| System action: The FL task does not start.
| System programmer response: Correct the error and restart the FL task
| EQQFL16E MORE THAN ONE DOT FOUND IN DESTINATION PARM
| Explanation: The value of the XCFDEST or SNADEST parameter in the FLOPTS statement is not valid because it
| contains more than one dot (period) The period divides the Tracker by Data Store destination names and there must
| be only one.
| System action: The FL task does not start.
| System programmer response: Correct the error and restart the FL task
| EQQFL17E AT LEAST ONE DOT MUST BE SPECIFIED IN DESTINATION PARM
| Explanation: The value of the XCFDEST or SNADEST parameter in the FLTS statement is not valid because it does
| not contain a dot (period). The period divides the Tracker by Data Store destination names and there must be a
| minimum of one.
| System action: The FL task does not start.
| System programmer response: Correct the error and restart the FL task

110

Tivoli OPC Messages and Codes

EQQFL18E EQQFL1AE

| EQQFL18E NO DESTINATION NAME FOUND FOR TRACKER TRACKER
| Explanation: The Controller has requested a job log from the Data Store, but the Tracker destination name is not
| specified in the SNADEST or XCFDEST parameter of the FLOPTS statement.
| System action: The request fails.
| System programmer response: Correct the XCFDEST or SNADEST parameter and restart the Data Store.
| EQQFL19I DATA STORE DST IS INACTIVE
| Explanation: The Controller has requested a job log, but the Data Store destination specified in the SNADEST or
| XCFDEST parameter of the FLOPTS statement is currently inactive.
| System action: The request fails.
| System programmer response: Start the appropriate Data Store and resubmit the request.
| EQQFL1AE UNEXPECTED FN SUBTASK END
| Explanation: The FL task has detected an unexpected end of FN subtask.
| System action: The FL task ends in error.
| Problem determination: Review the Data Store message log dataset, the EQQDUMP dataset, and the SYSMDUMP
| dataset to determine the cause of the problem
| User response: Contact your system programmer
| System programmer response: If the error persists, save the message log and dump datasets and contact your
| IBM representative.

Chapter 10. EQQFLnn Messages

111

112

Tivoli OPC Messages and Codes

EQQFV00E EQQFV05E

Chapter 11. EQQFVnn Messages

| EQQFV00E DUPLICATE NAMES IN THE DSTOPTS SNA DESTINATIONS
| Explanation: A minimum of one name in the SNA keyword destination list of the DSTOPTS initialization statement is
| a duplicate of a previously-specified name. These names are the application names of potential session partners and
| must be unique.
| System action: FN processing is terminated.
| System programmer response: Correct the name (or names) in error and restart the subsystem.
| EQQFV01I FN APPLICATION STARTED
| Explanation: The FN task has received control from the Data Store subsystem and is soon to start initialization
| processing.
| System action: FN processing continues.
| User response: None.
| EQQFV02E FN APPLICATION TERMINATED - SETLOGON EXECUTION FAILURE
| Explanation: A VTAM SETLOGON macro used for enabling FN logon processing has failed. The reason for this
| error is defined in detail by message EQQFV15E that precedes this message in the message log.
| System action: FN processing is terminated.
| Problem determination: Review message EQQFV15E to determine the cause of the error.
| System programmer response: Correct the error (or errors) and restart the subsystem.
| EQQV003E INITIALIZATION FAILED - SNA DESTINATION NOT SPECIFIED IN TRROPTS
| Explanation: In a Tracker system, FN initialization processing failed because no partner application IDs were
| specified in the SNAHOST keyword of the TRROPTS statement
| System action: FN processing is terminated.
| System programmer response: Add the missing information and restart the subsystem.
| EQQFV04E FN APPLICATION TERMINATED - PARAMETER PROCESSING FAILURE
| Explanation: FN initialization processing encountered an error in the parameters defined for it.
| System action: FN processing is terminated.
| Problem determination: Review earlier messages in the message log to determine the cause of the error.
| System programmer response: Correct all errors and restart the subsystem.
| EQQFV05E FN APPLICATION TERMINATED - INITIALIZATION PROCESSING FAILURE
| Explanation: FN initialization processing failed. Messages that are issued preceding this message define the cause
| of the error.
| System action: FN processing is terminated.
| Problem determination: Review earlier messages in the message log to determine the cause of the error.
| System programmer response: Correct all errors and restart the subsystem.

 Copyright IBM Corp. 1991, 1999

113

EQQFV06I EQQFV12E

| EQQFV06I FN APPLICATION ENDED
| Explanation: FN processing has completed and control is returned to the Tivoli OPC subsystem.
| System action: FN processing is terminated.
| User response: None.
| EQQV07E INITIALIZATION FAILED - SNA DESTINATION NOT SPECIFIED IN DSTOPTS
| Explanation: In a Controller system, FN initialization processing failed because no partner application IDs were
| specified in the SNA keyword of the DSTOPTS statement.
| System action: FN processing is terminated.
| System programmer response: Add the missing information and restart the subsystem.
| EQQFV08I INITIALIZATION FAILED - SUBSYSTEM STOP REQUESTED
| Explanation: FN received a subsystem stop request while in the initialization phase. FN was most likely waiting for
| some other Tivoli OPC resource to become active.
| System action: FN processing is terminated.
| User response: None.
| EQQFV09E INITIALIZATION FAILED - CTLLNAM KEYWORD NOT SPECIFIED OR INVALID
| Explanation: FN initialization processing failed because the CTLLUNAM keyword was not specified or was invalid.
| System action: FN initialization processing is terminated.
| System programmer response: Add the missing information and restart the subsystem.
| EQQFV10E NIB BUILD PROCESSING FAILED - R15 = R15 R00 = R00
| Explanation: The GENCB macro request that was issued to generate a NIB block did not complete normally.
| System action: FN processing is terminated.
| Problem determination: Use the R15 and R00 return codes to determine the cause of the error. For more
| information, refer to the appropriate documentation for the VTAM product installed on this MVS/ESA system.
| System programmer response: If insufficient main storage was the cause of the error, increase the region size and
| restart the Tivoli OPC subsystem. For any other cause of the error, contact your IBM representative.
| EQQFV11E RPL BUILD PROCESSING FAILED - R15 = R15 R00 = R00
| Explanation: The GENCB macro request that was issued to generate an RPL block did not complete normally.
| System action: FN processing is terminated.
| Problem determination: Use the R15 and R00 return codes to determine the cause of the error. For more
| information, refer to the appropriate documentation for the VTAM product installed on this MVS/ESA system.
| System programmer response: If insufficient main storage was the cause of the error, increase the region size and
| restart the Tivoli OPC subsystem. For any other cause of the error, contact your IBM representative.
| EQQFV12E NIB EXSLT BUILD PROCESSING FAILED - R15 = R15 R00 = R00
| Explanation: The GENCB macro request that was issued to generate a NIB EXLST block did not complete normally.
| System action: FN processing is terminated.
| Problem determination: Use the R15 and R00 return codes to determine the cause of the error. For more
| information, refer to the appropriate documentation for the VTAM product installed on this MVS/ESA system.
| System programmer response: If insufficient main storage was the cause of the error, increase the region size and
| restart the Tivoli OPC subsystem. For any other cause of the error, contact your IBM representative.

114

Tivoli OPC Messages and Codes

EQQFV13E EQQFV16E

| EQQFV13E ACB EXSLT BUILD PROCESSING FAILED - R15 = R15 R00 = R00
| Explanation: The GENCB macro request that was issued to generate an ACB EXLST block did not complete
| normally.
| System action: FN processing is terminated.
| Problem determination: Use the R15 and R00 return codes to determine the cause of the error. For more
| information, refer to the appropriate documentation for the VTAM product installed on this MVS/ESA system.
| System programmer response: If insufficient main storage was the cause of the error, increase the region size and
| restart the Tivoli OPC subsystem. For any other cause of the error, contact your IBM representative.
| EQQFV14E ACB BUILD PROCESSING FAILED - R15 = R15 R00 = R00
| Explanation: The GENCB macro request that was issued to generate the FN ACB did not complete normally.
| System action: FN processing is terminated.
| Problem determination: Use the R15 and R00 return codes to determine the cause of the error. For more
| information, refer to the appropriate documentation for the VTAM product installed on this MVS/ESA system.
| System programmer response: If insufficient main storage was the cause of the error, increase the region size and
| restart the Tivoli OPC subsystem. For any other cause of the error, contact your IBM representative.
| EQQFV15E VTAM MACRO REQUEST FAILURE - DIAGNOSTIC INFORMATION: NODE= NODE, REQUEST=
|
X'REQ' (NAMEREQ), RTNCD= X'RC' (DECRC) FDBK2= X'FDBK2' (DFDBK2), SSENSMI= SMI,
|
USENSEI= USEI, SSENSEI=SSEI R00= X'R00', R15= X'R15'
| Explanation: An error occurred when a VTAM request was executed or scheduled. The variable items in the
| message provide diagnostic information and have the following meanings:
|
|
|
|
|
|
|
|
|
|
|
|

NODE
REQ
NAMEREQ
RC
DECRC
FDBK2
DFDBK2
SMI
USEI
SSEI
R00
R15

FN application LU-name
VTAM request code in hexadecimal
VTAM request name
RTNCD feedback field value from RPL in hexadecimal
RTNCD feedback field value from RPL in decimal
FDBK2 feedback field value from RPL in hexadecimal
FDBK2 feedback field value from RPL in decimal
System sense modifier information from RPL
User sense information from RPL
System sense information from RPL
Register 0 return code after a VTAM macro request
Register 15 return code after a VTAM macro request.

| System action: The action taken depends on the severity of the error situation. If at all possible, FN tries to
| continue processing. For the most serious errors, for example, undefined feedback code, FN abends with a dump and
| user code.
| Problem determination: Use the diagnostic information in the message to determine the cause of the error. For
| more information, refer to the appropriate documentation for the VTAM product installed on the system.
| System programmer response: Analyze the diagnostic information and the dump (if produced) to determine the
| cause of the error. If this was not a user error, contact your IBM representative.
| EQQFV16E NAMEREQ REQUEST FAILURE - LU/APPLICATION NODE NOT FOUND
| Explanation: The VTAM NAMEREQ request failed to complete successfully because the LU-name NODE could not
| be found. The most likely reason for the error is either an invalid specification of an LU-name in the CTLLUNAM
| keyword of the DSTOPTS initialization statement or the NODE name has not been properly defined to VTAM.
| System action: FN processing is terminated.
| System programmer response: Review the name specified in the SNAHOST keyword. Make sure that it is correct
| and that a counterpart exists in the VTAM definition statements. Correct the items in error and restart FN.

Chapter 11. EQQFVnn Messages

115

EQQFV17E EQQFV22E

| EQQFV17E NAMEREQ REQUEST FAILURE - LU/APPLICATION NODE NOT ACTIVE
| Explanation: The VTAM NAMEREQ request failed to complete successfully because the LU-name NODE was not
| active.
| System action: FN processing is terminated.
| System programmer response: Investigate why NODE suddenly became inactive. Restart FN when NODE is
| active again.
| EQQFV18E NAMEREQ REQUEST FAILURE - VTAM ERROR OR NCP/VTAM INCOMPATIBILITY
| Explanation: The VTAM NAMEREQ request failed to complete successfully because there was an error in VTAM or
| an NCP/VTAM incompatibility. The reason for this error is defined in detail by message EQQFV15E that precedes
| this message in the Data Store message log.
| System action: FN processing is terminated.
| Problem determination: Review message EQQFV15E to determine the cause of the error.
| System programmer response: Correct the VTAM errors and restart FN.
| EQQFV19E SESSION STARTUP FAILED - PLU=LU NOT AVAILABLE
| Explanation: FN has not been able to establish a session because of one of the following reasons:
|
|
|

The Tivoli OPC Controller is not started
The FN task in the Tivoli OPC Controller is not available
The LU specified in the SNADEST of the DSTOPTS initialization is not active or is not defined.

| FN retries every 10 seconds until it is successful, or until the subsystem is stopped, or FN is deactivated.
| System action: FN continues to try and establish the LU-LU session.
| System programmer response: Review the name specified in the DSTLUNAM keyword of the DSTOPTS
| initialization statement and make sure that it is correct. If it is correct, ask the system operator at the Tivoli OPC
| Controller system to activate the required resource.
| EQQFV20I ACB SUCCESSFULLY CLOSED
| Explanation: FN has been successfully disconnected from VTAM.
| System action: FN termination processing continues.
| EQQFV21W UNABLE TO CLOSE ACB
| Explanation: FN is unable to successfully disconnect from VTAM.
| System action: FN termination processing continues even though the ACB could not be closed.
| Problem determination: It is most likely that a VTAM error has caused this error. Check the system log for VTAM
| error messages that can be related to this failure.
| System programmer response: None.
| EQQFV22E LOGON ATTEMPTED BY UNDEFINED LU/APPLICATION LU - CLSDST ISSUED
| Explanation: A remote FN application that is unknown to this host Tivoli OPC subsystem tried to establish a session.
| This message is issued only for an FN application at a Tivoli OPC host.
| System action: The request for the session is turned down by issuing a CLSDST macro. Processing continues for
| the host Tivoli OPC FN application.
| Problem determination: It is most likely that a name in the DSTOPTS SNADEST keyword list of names has been
| misspelled or left out entirely.
| System programmer response: Stop the FN task for which erroneous specifications have been given. Correct the
| specifications on the DSTOPTS statement and restart FN.

116

Tivoli OPC Messages and Codes

EQQFV23E EQQFV28W

| EQQFV23E LOGON REQUEST FOR LU/APPLICATION LU THAT IS ACTIVE - CLSDST ISSUED
| Explanation: A remote FN application that is already in session with the Tivoli OPC host FN application tried to
| establish a session. This message is issued only for an FN application at a Tivoli OPC host.
| System action: The request for a session is turned down and FN processing continues.
| Problem determination: The most likely reason for this error is that more than one remote FN application has the
| same LU-name specified for it. Check the DSTLUNAM keyword of the DSTOPTS statement for all remote FN
| applications and make sure that they are unique.
| System programmer response: Stop all FN tasks that have incorrect FNAPPL keyword specifications. Correct the
| DSTLUNAM specifications and restart the FN tasks.
| EQQFV24I ACB SUCCESSFULLY OPENED
| Explanation: FN has successfully established contact with VTAM and is ready for further VTAM processing.
| System action: FN processing continues.
| User response: None.
| EQQFV25I ACB OPEN FAILURE (RC=RC) - VTAM SHUTTING DOWN
| Explanation: FN was unable to establish contact with VTAM due to an OPEN ACB failure. RC is the ACB error flag
| value in hexadecimal.
| System action: FN processing continues.
| User response: None.
| EQQFV26E ACB OPEN FAILURE (RC=RC) - FN IMPROPERLY DEFINED
| Explanation: FN was unable to establish contact with VTAM due to an OPEN ACB failure. RC is the ACB error flag
| value in hexadecimal.
| System action: FN processing is terminated.
| Problem determination: Use the return code to determine the cause of the error. For more information, refer to the
| appropriate documentation for the VTAM product installed on the system.
| System programmer response: Correct the problem and restart FN.
| EQQFV27E ACB OPEN FAILURE (RC=RC) - ABEND 1104 DUE TO SERIOUS ERROR
| Explanation: FN was unable to establish contact with VTAM due to an OPEN ACB failure. RC is the ACB error flag
| value in hexadecimal.
| System action: FN processing is abnormally terminated with a dump (abend code 1104).
| Problem determination: Use the R15 and R00 return codes to determine the cause of the error. For more
| information, refer to the appropriate documentation for the VTAM product installed on the system.
| System programmer response: Analyze the 1104 abend dump. If this was not a user error, contact your IBM
| representative.
| EQQFV28W ACB OPEN FAILED FOR THE LAST 2 MINUTES - VTAM NOT ACTIVE
| Explanation: FN failed to establish contact with VTAM during the last two minutes because VTAM was not active.
| FN tries to establish contact every 10 seconds until contact is made. This message is issued every two minutes until
| contact is made.
| System action: FN continues to try and establish contact with VTAM until contact is made or until the Tivoli OPC
| subsystem is stopped.
| System programmer response: Ask your network operator to activate VTAM.

Chapter 11. EQQFVnn Messages

117

EQQFV29I EQQFV37I

| EQQFV29I VTAM TERMINATION OR FN DEACTIVATION; STOPPED SESSION SETUP ATTEMPTS
| Explanation: Session initiation attempts were stopped because VTAM is terminating or because the FN application
| was deactivated.
| System action: FN termination processing continues.
| User response: None.
| EQQFV31I SUBSYSTEM STOP REQUEST TERMINATED SESSION SETUP ATTEMPTS
| Explanation: A remote FN application was in the process of initiating a session when the subsystem was stopped.
| System action: FN termination processing continues.
| Operator response: None.
| EQQFV32I SUBSYSTEM STOP REQUEST TERMINATED ACB OPEN ATTEMPTS
| Explanation: FN was in the process of establishing contact with VTAM when the subsystem was stopped.
| System action: FN termination processing continues.
| Operator response: None.
| EQQFV33E ACB OPEN FAILED FOR THE LAST 2 MINUTES - FN APPLICATION NOT ACTIVE
| Explanation: FN failed to establish contact with VTAM during the last two minutes because the FN application was
| not activated. FN tries to establish contact every 10 seconds until contact is made. This message is issued every two
| minutes until contact is established.
| System action: FN continues to try and establish contact with VTAM until contact is made or until the Tivoli OPC
| subsystem is stopped.
| System programmer response: Ask your network operator to activate the VTAM LUs.
| EQQFV34E NAMEREQ REQUEST FAILURE - LU/APPLICATION NODE INHIBITED
| Explanation: The VTAM NAMEREQ request failed to complete successfully because the LU-name NODE was
| inhibited. The most likely reason for the error is that the cross-domain FN partner NODE has been deactivated or the
| partner VTAM system has been taken down.
| System action: If NAMEREQ is the REQSESS request, FN processing continues to try and establish a session
| every 10 seconds. For other VTAM requests, FN processing is terminated.
| System programmer response: Ask your network operator to activate the VTAM or the FN application, or both, on
| the cross-domain partner system.
| EQQFV36I SESSION HOME-DEST ESTABLISHED
| Explanation: A session has been established between the HOME home application and the DEST destination
| application.
| System action: FN processing continues.
| Operator response: None.
| EQQFV37I SESSION HOME-DEST ENDED
| Explanation: The session between the HOME home application and the DEST destination application has
| terminated.
| System action: FN processing continues.
| Operator response: None.

118

Tivoli OPC Messages and Codes

EQQV038E EQQFV43E

| EQQV038E DESTINATION LU INCONSISTENTLY SPECIFIED
| Explanation: A destination that runs Tivoli OPC FN has been specified in the OPCAV1R2 keyword of the DSTOPTS
| initialization statement.
| System action: FN processing continues.
| System programmer response: Correct the OPCAV1R2 keyword in the DSTOPTS initialization statement and
| restart the Data Store.
| EQQV039E DESTINATION LU NOT SPECIFIED AS OPC/A V1R2 NEC
| Explanation: A destination that runs OPC/A Version 1 Release 2 NEC is not specified in the OPCAV1R2 keyword of
| the DSTOPTS initialization statement.
| System action: FN processing continues.
| System programmer response: Correct the OPCAV1R2 keyword in the DSTOPTS initialization statement and
| restart the Data Store.
| EQQFV40I CURRENTLY RUNNING WITH LU AS CONTROLLER
| Explanation: FN in a Tivoli OPC Tracker system has received a Controller identification.
| System action: FN processing continues.
| User response: None.
| EQQFV41E THE FN TASK IGNORED THE FOLLOWING ELEMENT ON THE FN QUEUE: DQE
| Explanation: An invalid element has been found by the FN task. It is possible that the first four bytes of the element
| do not match the Tivoli OPC character string ‘DQE ’. (The fourth byte is a blank space.) If message EQQV039E was
| issued previously, EQQV041E is issued for all elements containing the destination specified in EQQV039E.
| System action: The FN task does no more processing of the element, but continues normal processing.
| System programmer response: If message EQQV039E was issued previously, perform the actions described for
| that message. Otherwise, save the Tivoli OPC message log dataset containing this error message, and contact your
| IBM representative.
| EQQFV42E THE FN TASK IGNORED THE FOLLOWING DATA, RECEIVED FORM NODE: DQE
| Explanation: The receiving FN task did not recognize the type of data received from the application. This message
| is issued once for every invalid receive operation.
| System action: FN processing continues.
| System programmer response: Check that the session parameters specified in the VTAM LOGMODE table are
| valid. Especially check that the RU-sizes are not zero. If this message occurs during normal execution and the
| VTAM LOGMODE definitions are correctly specified, contact your IBM representative.
| EQQFV43E INVALID RU-SIZE SPECIFIED IN LU SESSION PARAMETERS
| Explanation: The RU-sizes specified in the session parameters are not valid.
| System action: FN processing continues, but the specified session is not established.
| System programmer response: Check that the RU-sizes specified in the Tracker node are valid. If necessary,
| specify different RU-sizes, and stop and restart the Tracker FN.

Chapter 11. EQQFVnn Messages

119

EQQFV44E EQQFV46E

| EQQFV44E OPNDST FAILURE WHEN CONFIRMING SESSION WITH TRACKER LU
| Explanation: The OPNDST macro that was issued to confirm session establishment between the FN Controller and
| a remote Tracker failed. The most likely reason for the error is that there is no active route back to the Tracker from
| the Controller node or that the VTAM environment of the Tracker requesting the session is going down.
| System action: FN processing continues and the FN Controller logon exit is ready to handle subsequent logon
| attempts from the remote Tracker.
| System programmer response: Ask your network operator to activate the necessary links for secure an active route
| back to the Tracker.
| EQQFV45E THE FN TASK HAS BEEN CONTACTED BY AN UNKNOWN DESTINATION: LU
| Explanation: The FN task has recognized a session control request from a destination that is not defined in the
| DSTOPTS initialization statement.
| System action: A bind request from an unknown destination is rejected and FN processing continues normally.
| Problem determination: Use the name of the unknown destination to determine which location is trying to access
| FN resources.
| System programmer response: If the FN task should support the destination specified in this message, update the
| DSTOPTS initialization statement and restart the Tivoli OPC subsystem.
| EQQFV46E THE FN TASK CAN NOT FIND DEST IN DESTINATION TABLE
| Explanation: The FN task has recognized a session control request from a destination that is not defined in the
| destination table.
| System action: A bind request from an unknown destination is rejected and FN processing continues normally.
| Problem determination: Use the name of the unknown destination to determine which location is trying to access
| FN resources.
| System programmer response: If the FN task should support the destination specified in this message, update the
| DSTOPTS initialization statement and restart the Tivoli OPC subsystem.

120

Tivoli OPC Messages and Codes

EQQFA00E EQQFA03E

Chapter 12. EQQFxxx Messages

| EQQFA00E VSAM ERROR FUNC: FUNC RC: RC REASON: REASON
| Explanation: A VSAM operation failed. FUNC specifies which kind of operation, for example, OPEN, CLOSE, and
| so on. RC and REASON are the VSAM return and reason codes.
| System action: If the VSAM error could not be bypassed the Data Store is terminated. See Chapter 39, “Reason
| Codes” on page 539 for a list of the REASON codes.
| Problem determination: Refer to the dump dataset (ddname EQQDUMP) for further information. This file contains
| a copy of the control block.
| User response: Contact your system programmer.
| System programmer response: Contact your IBM representative.
| EQQFA01E BAD CONTROL BLOCK REASON: - REASON: REASON
| Explanation: This message describes an internal error of the Data Store and is addressed to Customer Support.
| The first field of the specified control block is invalid. It does not contain the name of the control block.
| System action: The involved Data Store task is closed. If the involved task is either the JES Queue or the
| Database task, the Data Store is terminated. See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Refer to the dump dataset (ddname EQQDUMP) for further information. This file contains
| a copy of the control block.
| User response: Contact your system programmer.
| System programmer response: Contact your IBM representative.
| EQQFA02E BAD INSTANCE - REASON: REASON
| Explanation: This message describes an internal error of the Data Store and is addressed to Customer Support.
| The specified instance address for the called service is invalid.
| System action: The involved Data Store task is closed. If the involved task is either the JES Queue or the
| Database task, the Data Store is terminated. See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Refer to the dump dataset (ddname EQQDUMP) for further information.
| User response: Contact your system programmer.
| System programmer response: Contact your IBM representative.
| EQQFA03E BAD PARAMETER - REASON: REASON
| Explanation: This message describes an internal error of the Data Store and is addressed to Customer Support.
| One or more parameters passed to a called service are invalid.
| System action: The involved Data Store task is closed. If the involved task is either the JES Queue or the
| Database task, the Data Store is terminated. See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Refer to the dump dataset (ddname EQQDUMP) for further information. This file contains
| a copy of the value of the invalid parameter.
| User response: Contact your system programmer.
| System programmer response: Contact your IBM representative.

 Copyright IBM Corp. 1991, 1999

121

EQQFA04E EQQFA07E

| EQQFA04E BAD REQUEST - REASON: REASON
| Explanation: This message describes an internal error of the Data Store and is addressed to Customer Support.
| The specified address for the control block is invalid.
| System action: The involved Data Store task is closed. If the involved task is either the JES Queue or the
| Database task, the Data Store is terminated. See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Refer to the dump dataset (ddname EQQDUMP) for further information. This file contains
| the value of the invalid request field.
| User response: Contact your system programmer.
| System programmer response: Contact your IBM representative.
| EQQFA05E BAD SYSOUT DATABASE - REASON: REASON
| Explanation: Generally there is a mismatch between the primary keys dataset and data files, for example, the Data
| Store was started without all the previously-used data files and containing the sysout listed by the primary key file.
| System action: The Data Store is terminated. See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Refer to the dump dataset (ddname EQQDUMP) for further information.
| User response: Contact your system programmer.
| System programmer response: Check that, when the Data Store was started, it was pointing to the correct primary
| key and data files. If no error is found, contact your IBM representative.
| EQQFA06E IS EMPTY - REASON: REASON
| Explanation: This message describes an internal error of the Data Store and is addressed to Customer Support. An
| internal objects list was found to be empty.
| System action: The involved Data Store task is closed. If the involved task is either the JES Queue or the
| Database task, the Data Store is terminated. See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Refer to the dump dataset (ddname EQQDUMP) for further information.
| User response: Contact your system programmer.
| System programmer response: Contact your IBM representative.
| EQQFA07E NOT FOUND - REASON: REASON
| Explanation: This message describes an internal error of the Data Store and is addressed to Customer Support. An
| internal object was not found by a search operation.
| System action: The involved Data Store task is closed. If the involved task is either the JES Queue or the
| Database task, the Data Store is terminated. See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Refer to the dump dataset (ddname EQQDUMP) for further information.
| User response: Contact your system programmer.
| System programmer response: Contact your IBM representative.

122

Tivoli OPC Messages and Codes

EQQFA08E EQQFA12E

| EQQFA08E NOT INITIALIZED - REASON: REASON
| Explanation: This message describes an internal error of the Data Store and is addressed to Customer Support. A
| data file was not found in an initialized state.
| System action: The Data Store is terminated See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Refer to the dump dataset (ddname EQQDUMP) for further information.
| User response: Contact your system programmer.
| System programmer response: Contact your IBM representative.
| EQQFA10E DETACH ERROR - REASON: REASON
| Explanation: This message describes an internal error of the Data Store and is addressed to Customer Support. An
| error occurred when the Data Store attempted to detach a subtask.
| System action: The involved Data Store task is closed. If the involved task is either the JES Queue or the
| Database task, the Data Store is terminated. See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Review earlier messages in the Data Store message log and SYSLOG datasets to
| determine the cause of the error.
| User response: Contact your system programmer.
| System programmer response: If possible correct all errors and restart the Data Store. If the error persists, contact
| your IBM representative.
| EQQFA11E NOT ACTIVE - REASON: REASON
| Explanation: This message describes an internal error of the Data Store and is addressed to Customer Support. A
| component that should be active was found in an inactive state.
| System action: The involved Data Store task is closed. If the involved task is either the JES Queue or the
| Database task, the Data Store is terminated. See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Refer to the dump dataset (ddname EQQDUMP) for further information.
| User response: Contact your system programmer.
| System programmer response: Contact your IBM representative.
| EQQFA12E NOT READY - REASON: REASON
| Explanation: This message describes an internal error of the Data Store and is addressed to Customer Support. A
| data file or primary index was found not ready to be used, for example, not logically open.
| System action: The Data Store is terminated
| Problem determination: Refer to the dump dataset (ddname EQQDUMP) for further information.
| User response: Contact your system programmer.
| System programmer response: Contact your IBM representative.

Chapter 12. EQQFxxx Messages

123

EQQFA13E EQQFA20E

| EQQFA13E INTERNAL ERROR - REASON: REASON
| Explanation: This message describes an internal error of the Data Store and is addressed to Customer Support.
| This is a generic internal failure of the Database task. It can occur during the shutdown of the Data Store and
| indicates an internal mismatch. No data is lost, but its handling can be deferred to the next startup of the Data Store.
| System action: The Data Store is terminated. See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Refer to the dump dataset (ddname EQQDUMP) for further information.
| User response: Contact your system programmer.
| System programmer response: Contact your IBM representative.
| EQQFA14E BAD DATA - REASON: REASON
| Explanation: This message describes an internal error of the Data Store and is addressed to Customer Support. A
| data file or a storage area was found in a corrupted state.
| System action: The involved Data Store task is closed. If the involved task is either the JES Queue or the
| Database task, the Data Store is terminated. See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Refer to the dump dataset (ddname EQQDUMP) for further information.
| User response: Contact your system programmer.
| System programmer response: Use the Recover utility to recover the corrupted data file or use the Export utility to
| make a copy of the previous backup copy. After the recovery operation, if the problem persists, contact your IBM
| representative.
| EQQFA17E COMMAND ERROR
| Explanation: This message describes an internal error of the Data Store and is addressed to Customer Support. An
| internal error was detected while analyzing a modify comamnd.
| System action: The modify command is ignored.
| User response: Resubmit the modify command with the correct syntax.
| EQQFA18E STOP IN PROGRESS
| Explanation: The Data Store has received a command while closing all the subtasks.
| System action: The stop command is ignored.
| EQQFA19E COMMAND SYNTAX ERROR
| Explanation: The modify command is syntactically incorrect.
| System action: The modify command is ignored.
| User response: Resubmit the modify command with the correct syntax.
| EQQFA20E NOT OPEN - REASON: REASON
| Explanation: This message describes an internal error of the Data Store and is addressed to Customer Support. A
| read or write operation was attempted on a data file or index that was not previously opened.
| System action: The Data Store is terminated. See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Refer to the dump dataset (with ddname EQQDUMP) for further information.
| User response: Contact your system programmer.
| System programmer response: Contact your IBM representative.

124

Tivoli OPC Messages and Codes

EQQFA21E EQQFA25E

| EQQFA21E ERROR IN RPL GENERATION FOR VSAM ACCESS - REASON: REASON
| Explanation: During an RPL generation, the DIV macro returns an error.
| System action: The Data Store is terminated. See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Review earlier messages in the Data Store message log and SYSLOG datasets to
| determine the cause of the error. One possibility is that there is a DFP error in the Data Store data files or indexes.
| User response: Contact your system programmer.
| System programmer response: If possible correct all errors and restart the Data Store. If the error persists, contact
| your IBM representative.
| EQQFA22E ERROR IN POINT OPERATION ON VSAM FILE - REASON: REASON
| Explanation: During a Point operation, the DIV macro returns an error.
| System action: The Data Store is terminated. See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Review earlier messages in the Data Store message log and SYSLOG datasets to
| determine the cause of the error. One possibility is that there is a DFP error in the Data Store data files or indexes.
| User response: Contact your system programmer.
| System programmer response: If possible correct all errors and restart the Data Store. If the error persists, contact
| your IBM representative.
| EQQFA24E VSAM LOGICAL ERROR IN GET - REASON: REASON
| Explanation: During a Get operation, the DIV macro returns an error.
| System action: The Data Store is terminated. See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Review earlier messages in the Data Store message log and SYSLOG datasets to
| determine the cause of the error. One possibility is that there is a DFP error in the Data Store data files or indexes.
| User response: Contact your system programmer.
| System programmer response: If possible correct all errors and restart the Data Store. If the error persists, contact
| your IBM representative.
| EQQFA25E VSAM PHYSICAL ERROR IN GET - REASON: REASON
| Explanation: During a Get operation, the DIV macro returns an error.
| System action: The Data Store is terminated. See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Review earlier messages in the Data Store message log and SYSLOG datasets to
| determine the cause of the error. One possibility is that there is a DFP error in the Data Store data files or indexes.
| User response: Contact your system programmer.
| System programmer response: If possible correct all errors and restart the Data Store. If the error persists, contact
| your IBM representative.

Chapter 12. EQQFxxx Messages

125

EQQFA26E EQQFA30E

| EQQFA26E NO PARAMETER PASSED - REASON: REASON
| Explanation: This message describes an internal error of the Data Store and is addressed to Customer Support. A
| calling function did not pass all the required parameters to the called function.
| System action: The Data Store is terminated. See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Refer to the dump dataset (ddname EQQDUMP) for further information.
| User response: Contact your system programmer.
| System programmer response: Contact your IBM representative.
| EQQFA27E INCORRECT PARAMETER IN MODIFY COMMAND
| Explanation: The command could not be processed because one or more parameters on that command could not
| be recognized or are out of range.
| System action: The command is ignored.
| User response: Change the Modify command and resubmit the command.
| EQQFA28E TRANSMISSION ERROR FROM COMMUNICATION - REASON: REASON
| Explanation: This message describes an internal error of the Data Store and is addressed to Customer Support.
| There was a generic transmission error in the communication subtask.
| System action: The requested data cannot be transmitted. See Chapter 39, “Reason Codes” on page 539 for a list
| of the REASON codes.
| Problem determination: Review earlier messages in the Data Store message log and SYSLOG datasets to
| determine the cause of the error. One possible reason is a communication failure in the SNA or the XCF
| communication task due to system resource definition or an unavailable resource.
| User response: Contact your system programmer.
| System programmer response: If possible correct all errors and restart the Data Store. If the error persists, contact
| your IBM representative.
| EQQFA30E BAD STATUS - REASON: REASON
| Explanation: This message describes an internal error of the Data Store and is addressed to Customer Support. An
| internal object was found in a corrupted state.
| System action: The involved Data Store task is closed. If the involved task is either the JES Queue or the
| Database task, the Data Store is terminated. See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Refer to the dump dataset (ddname EQQDUMP) for further information.
| User response: Contact your system programmer.
| System programmer response: Contact your IBM representative.

126

Tivoli OPC Messages and Codes

EQQFA32E EQQFA37E

| EQQFA32E BAD PAGE - REASON: REASON
| Explanation: This message describes an internal error of the Data Store and is addressed to Customer Support.
| The database component detected a data page in a corrupted state.
| System action: The Data Store is terminated. See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Refer to the dump dataset (ddname EQQDUMP) for further information.
| User response: Contact your system programmer.
| System programmer response: Use the Recover utility to recover the corrupted data file or use the Export utility to
| make a copy of the previous backup copy. After the recovery operation, if the problem persists, contact your IBM
| representative.
| EQQFA34E NO SPACE AVAILABLE - REASON: REASON
| Explanation: There is no more space available in a data file or an index file.
| System action: The involved Database data file subtask is closed. Data Store processing continues using the other
| data files. If this was the last available data file, the Data Store is terminated.
| Problem determination: Refer to the dump dataset (ddname EQQDUMP) for further information. The data files or
| the index files, or both, should be reallocated with more space and the old data files should be copied using the
| IDCAMS Repro utility or the Data Store Export/Import utility.
| EQQFA36E ERROR DURING ENQUEUE - REASON: REASON
| Explanation: This message describes an internal error of the Data Store and is addressed to Customer Support. An
| enqueue operation failed.
| System action: The involved Data Store task is closed. If the involved task is either the JES Queue or the
| Database task, the Data Store is terminated. See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Refer to the dump dataset (ddname EQQDUMP) for further information.
| User response: Contact your system programmer.
| System programmer response: Contact your IBM representative.
| EQQFA37E ALREADY RESERVED - REASON: REASON
| Explanation: This message describes an internal error of the Data Store and is addressed to Customer Support.
| The Data Store attempted to reserve a message that was already reserved for processing.
| System action: The involved Data Store task is closed. If the involved task is either the JES Queue or the
| Database task, the Data Store is terminated. See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Refer to the dump dataset (ddname EQQDUMP) for further information.
| User response: Contact your system programmer.
| System programmer response: Contact your IBM representative.

Chapter 12. EQQFxxx Messages

127

EQQFA39E EQQFA44E

| EQQFA39E ERROR IN ACB GENERATION FOR VSAM ACCESS - REASON: REASON
| Explanation: During an ACB generation, the macro returns an error.
| System action: The Data Store is terminated. See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Review earlier messages in the Data Store message log and SYSLOG datasets to
| determine the cause of the error. One possibility is that there is a DFP error in the Data Store data files or indexes.
| User response: Contact your system programmer.
| System programmer response: If possible correct all errors and restart the Data Store. If the error persists, contact
| your IBM representative.
| EQQFA42E NO DD FOUND - REASON: REASON
| Explanation: In the Data Store startup procedure, all the ddnames and the files that are necessary for Data Store
| life were not specified.
| System action: The Data Store is terminated See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| User response: Check the Data Store start up procedure.
| Problem determination: Refer to the Installation Guide for correct definitions of files.
| EQQFA43E VSAM OPEN ERROR - REASON: REASON
| Explanation: During an Open operation, the macro returns an error.
| System action: The Data Store is terminated. See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Review earlier messages in the Data Store message log and SYSLOG datasets to
| determine the cause of the error. One possibility is that there is a DFP error in the Data Store data files or indexes.
| User response: Contact your system programmer.
| System programmer response: If possible correct all errors and restart the Data Store. If the error persists, contact
| your IBM representative.
| EQQFA44E GENERIC I/O ERROR - REASON: REASON
| Explanation: During an I/O operation, an error was detected.
| System action: The involved Data Store task is closed. If the involved task is either the JES Queue or the
| Database task, the Data Store is terminated. See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Review earlier messages in the Data Store message log and SYSLOG datasets to
| determine the cause of the error. One possibility is that there is a DFP error in the Data Store data files or indexes.
| User response: Contact your system programmer.
| System programmer response: If possible correct all errors and restart the Data Store. If the error persists, contact
| your IBM representative.

128

Tivoli OPC Messages and Codes

EQQFA45E EQQFA48E

| EQQFA45E ATTACH ERROR - REASON: REASON
| Explanation: This message describes an internal error of the Data Store and is addressed to Customer Support. An
| error occurred when the Data Store attempted to attach a subtask.
| System action: The involved Data Store task is closed. If the involved task is either the JES Queue or the
| Database task, the Data Store is terminated. See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Review earlier messages in the Data Store message log and SYSLOG datasets to
| determine the cause of the error. One possibility is that the Data Store is being started in a region that is too small.
| User response: Contact your system programmer.
| System programmer response: If possible correct all errors and restart the Data Store. If the error persists, contact
| your IBM representative.
| EQQFA46E UNEXPECTED TASK END - REASON: REASON
| Explanation: A Data Store subtask ended unexpectedly.
| System action: The involved Data Store task is closed. If the involved task is either the JES Queue or the
| Database task, the Data Store is terminated. See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Refer to the dump dataset (ddname EQQDUMP) for further information.
| User response: Contact your system programmer.
| System programmer response: Contact your IBM representative.
| EQQFA47E ERROR DURING DYNALLOC (ALLOCATION) - REASON: REASON
| Explanation: There was an error during a Dynalloc operation.
| System action: The involved Data Store task is closed. If the involved task is either the JES Queue or the
| Database task, the Data Store is terminated. See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Refer to the dump dataset (ddname EQQDUMP) for further information.
| User response: Contact your system programmer.
| System programmer response: Contact your IBM representative.
| EQQFA48E ERROR DURING SSI REQUEST - REASON: REASON
| Explanation: This message describes an internal error of the Data Store and is addressed to Customer Support. An
| error was detected when a Subsystem Interface function was invoked.
| System action: The Data Store is terminated. See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Refer to the dump dataset (ddname EQQDUMP) for further information.
| User response: Contact your system programmer.
| System programmer response: Contact your IBM representative.

Chapter 12. EQQFxxx Messages

129

EQQFA49E EQQFAR6E

| EQQFA49E ERROR DURING DYNALLOC (UNALLOCATION) - REASON: REASON
| Explanation: There was an error during a Dynalloc operation.
| System action: The involved Data Store task is closed. If the involved task is either the JES Queue or the
| Database task, the Data Store is terminated. See Chapter 39, “Reason Codes” on page 539 for a list of the
| REASON codes.
| Problem determination: Refer to the dump dataset (ddname EQQDUMP) for further information.
| User response: Contact your system programmer.
| System programmer response: Contact your IBM representative.
| EQQFAR1I WAITING FOR SUBTASK COMPLETION TASKNAME
| Explanation: The Data Store is waiting for a subtask completion. This message can occur during the Data Store
| shut down.
| System action: None.
| User response: None
| EQQFAR2I TASKNAME TASK ABENDED - RETURN: REASON
| Explanation: The task specified TASKNAME has abended with reason REASON or is terminated unexpectedly.
| System action: The involved Data Store task is closed. If the involved task is either the JES Queue or the
| Database task, the Data Store is terminated.
| Problem determination: Review earlier messages in the Data Store message log and SYSLOG datasets to
| determine the cause of the error. One possibility is that the Data Store is being started in a region that is too small.
| User response: Contact your system programmer.
| System programmer response: If possible correct all errors and restart the Data Store. If the error persists, contact
| your IBM representative.
| EQQFAR3I ALL WRITER SUBTASKS ARE CLOSED
| Explanation: All active writer subtasks are now closed.
| System action: The Data Store is not able to store sysout until a minimum of one writer is restarted. To start some
| of them, issue the ARMDWR modify command.
| EQQFAR4I OPC DATA STORE ENDED
| Explanation: All Data Store subtasks have terminated. The Data Store subsystem is starting its own termination
| process.
| System action: The Data Store subsystem frees all acquired resources and is terminated.
| EQQFAR5E INVALID STOREMETHOD OPTION
| Explanation: The STOREMETHOD option specified in DSTOPTS is invalid. Valid values are: ALWAYS,
| CMCOMPLETE, MVSCCOMPLETE.
| System action: The Data Store does not start.
| EQQFAR6E INVALID COMBINATION OF COMMUNICATION PARAMETERS
| Explanation: The combination of communication parameters is invalid, for example, you have specified both
| HOSTCON(SNA) and CTLMEM.
| System action: The Data Store does not start.

130

Tivoli OPC Messages and Codes

EQQFAR7E EQQFARIW

| EQQFAR7E INVALID REQMETHOD OPTION
| Explanation: The REQMETHOD option specified in DSTOPTS is invalid. The valid value is EXIT01 or blank.
| System action: The Data Store does not start.
| EQQFARAI DATA STORE TASKNAME TASK ACTIVE
| Explanation: The task indicated by TASKNAME has been successfully started and is active.
| System action: The Data Store continues processing.
| EQQFARBE A COMMUNICATION METHOD MUST BE SPECIFIED (SNA / XCF)
| Explanation: You must specify one of the two methods for communication in DSTOPTS via the HOSTCON keyword.
| System action: The Data Store does not start.
| EQQFARCE DSTLUNAM / CTLLUNAM ARE MANDATORY WHEN HOSTCON(SNA) IS SPECIFIED
| Explanation: If HOSTCON(SNA) is required, you must specify both DSTLUNAM and CTLLUNAM.
| System action: The Data Store does not start.
| EQQFARDE DSTGROUP / DSTMEM / CTLMEM ARE MANDATORY WHEN HOSTCON(XCF) IS SPECIFIED
| Explanation: If HOSTCON(XCF) is required, you must specify all the three parameters.
| System action: The Data Store does not start.
| EQQFAREE SYSCLASS IS MANDATORY IN DSTOPTS OPTIONS
| Explanation: You must specify the SYSCLASS (sysout class reserved for Data Store) parameter in DSTOPTS.
| System action: The Data Store does not start.
| EQQFARFW NWRITER PARM NOT SPECIFIED OR OUT OF RANGE (1:16): DEFAULTED TO 1
| Explanation: The NWRITER (number of writer tasks) parameter was invalid or not specified. The number of writers
| was defaulted to 1.
| System action: The Data Store continues processing.
| EQQFARGW MAXSTOL PARM NOT SPECIFIED OR OUT OF RANGE (0:10000): DEFAULTED TO 0
| Explanation: The MAXSTOL (maximum number of sysout lines stored in SysDb) parameter was invalid or not
| specified. The maximum number of stored lines was defaulted to 0.
| System action: The Data Store continues processing.
| EQQFARHW MAXSYSL PARM NOT SPECIFIED OR OUT OF RANGE (0:10000): DEFAULTED TO 0
| Explanation: The MAXSYSL (maximum number of sysout lines returned to the Controller) parameter was invalid or
| not specified. The maximum number of sysout lines was defaulted to 0.
| System action: The Data Store continues processing.
| EQQFARIW QTIMEOUT PARM NOT SPECIFIED OR OUT OF RANGE (0:360): DEFAULTED TO 15
| Explanation: The QTIMEOUT (timeout system reader) parameter was invalid or not specified. THe timeout system
| reader was defaulted to 15.
| System action: The Data Store continues processing.

Chapter 12. EQQFxxx Messages

131

EQQFARJE EQQFARSI

| EQQFARJE DSTHIGHJOBID PARM MUST BE GREATER THAN DSTLOWJOBID PARM.
| Explanation: You have specified a value for the DSTHIGHJOBID parameter that is greater than the value of the
| DSTLOWJOBID parameter.
| System action: The Data Store does not start.
| EQQFARLW CINTERVAL PARM NOT SPECIFIED OR OUT OF RANGE (0:1440): DEFAULTED TO 0
| Explanation: The CINTERVAL (interval time in minutes for clean up) parameter was invalid or not specified. The
| interval time for clean up was defaulted to 0.
| System action: The Data Store continues processing.
| EQQFARMW WINTERVAL PARM NOT SPECIFIED OR OUT OF RANGE (0:3600): DEFAULTED TO 30
| Explanation: The WINTERVAL (interval time in minutes for writer) parameter was invalid or not specified. The
| interval time for writer was defaulted to 30.
| System action: The Data Store continues processing.
| EQQFARNW DELAYTIME PARM NOT SPECIFIED OR OUT OF RANGE (0:1440): DEFAULTED TO 1
| Explanation: The DELAYTIME (maximum delay for job permanence in JES queue) parameter was invalid or not
| specified. The parameter was defaulted to 1.
| System action: The Data Store continues processing.
| EQQFAROE REQDEFCLASS MUST BE DIFFERENT FROM SYSCLASS
| Explanation: The REQDEFCLASS (default class for requeue) parameter must be different from the SYSCLASS
| (sysout class reserved for Data Store) parameter.
| System action: The Data Store does not start.
| EQQFARPE UNABLE TO START TASK BECAUSE IT IS ALREADY ACTIVE
| Explanation: An operator START command has been entered for a Data Store task that is already active.
| System action: The second attempt is terminated.
| System programmer response: If you want to restart the task, first stop it, and then issue the START command.
| EQQFARQE OPC DATA STORE IS ALREADY ACTIVE ON SYSCLASS
| Explanation: A Data Store has been started with a reserved sysout class that is assigned to another active Data
| Store.
| System action: The second Data Store is terminated.
| System programmer response: If you want to restart the second Data Store, first change the subsys class in the
| initialization parameters.
| EQQFARRI SUBTASK TASKNAME DIAGNOSE HAS BEEN ACTIVATED
| Explanation: The diagnose trace for subtask TASKNAME has been activated
| System action: The activities of subtask TASKNAME are now traced.
| EQQFARSI SUBTASK TASKNAME DIAGNOSE HAS BEEN DE-ACTIVATED
| Explanation: The diagnose trace for subtask TASKNAME has been deactivated.
| System action: The activities of subtask TASKNAME are now traced.

132

Tivoli OPC Messages and Codes

EQQFARTW EQQFCC2I

| EQQFARTW CLNPARM PARM NOT SPECIFIED DEFAULTED TO EQQCLNPA
| Explanation: The CLNPARM (clean up options member name) parameter was not specified. The clean up options
| member name was defaulted to EQQCLNPA.
| System action: The Data Store continues processing.
| EQQFARUE DSTREQUEUEDEF OPTION INVALID. MUST BE NONHELD or ASIS
| Explanation: The DSTREQUEUEDEF option specified in DSTOPTS is invalid. Valid values are NONHELD or ASIS.
| System action: The Data Store does not start.
| EQQFARVW DSTREQUEUEDEF PARM NOT SPECIFIED DEFAULTED TO ASIS
| Explanation: The DSTREQUEUEDEF parameter was not specified. The parameter was defaulted to ASIS.
| System action: The Data Store continues processing.
| EQQFARWE SOME CLASSES SPECIFIED IN DSTREQUEUE ARE INVALID
| Explanation: A class (or classes) that is specified in the DSTREQUEUE option is invalid. You must specify only
| valid classes.
| System action: The Data Store does not start.
| EQQFARXE SOME DISP SPECIFIED IN DSTREQUEUE ARE INVALID MUST BE N OR A.
| Explanation: A disp (or disps) that is specified in the DSTREQUEUE option is invalid. Valid values are N or A.
| System action: The Data Store does not start.
| EQQFARYI DSTLOWJOBID PARM NOT SPECIFIED, DEFAULTED TO 1
| Explanation: The DSTLOWJOBID parameter was invalid or not specified. The parameter was defaulted to 1.
| System action: The Data Store continues processing.
| EQQFARZI DSTHIGHJOBID PARM NOT SPECIFIED, DEFAULTED TO 9999
| Explanation: The DSTHIGHJOBID parameter was invalid or not specified. The parameter was defaulted to 9999.
| System action: The Data Store continues processing.
| EQQFCC0E DATA STORE COMMUNICATION TASK INITIALIZATION FAILED
| Explanation: The Communication task could not acquire all the resources needed for normal operation.
| System action: The Communication task is not started.
| Problem determination: Review earlier messages in the Data Store message log to determine the cause of the
| error.
| System programmer response: Correct the errors and restart the communication task.
| EQQFCC1I DATA STORE COMMUNICATION TASK INITIALIZATION ENDED
| Explanation: The Communication task has successfully completed its initialization.
| System action: Communication processing starts.
| EQQFCC2I DATA STORE COMMUNICATION TASK ENDED
| Explanation: The Communication processing has been completed and control is returned to the OPC Data Store
| subsystem.
| System action: The Communication task is terminated.

Chapter 12. EQQFxxx Messages

133

EQQFCC3I EQQFCCBI

| EQQFCC3I STARTING FN APPLICATION
| Explanation: The Data Store FN task has received control from the Data Store communication subtask and is soon
| to start initialization processing.
| System action: Data Store FN processing continues.
| EQQFCC4I CLOSING FN APPLICATION
| Explanation: The Data Store FN processing has been completed and control is returned to the Data Store
| communication task.
| System action: Data Store FN processing is terminated.
| EQQFCC5E FN APPLICATION DOES NOT RESPOND
| Explanation: After a close request issued by the Data Store communication task, the Data Store FN subtask does
| not respond.
| System action: The system waits until the subtask is closed.
| EQQFCC6I XCF COMMUNICATION WITH CONTROLLER MEMBER MEMBER IS OFFLINE
| Explanation: The member MEMBER of the XCF communication with the Controller is offline.
| System action: The Data Store cannot communicate with the Controller.
| User response: Check if the Controller is active or if there are some problems in the XCF connections. One
| possibility is that either CTLMEM or DSTGROUP is incorrectly specified in the DSTOPTS initialization statement.
| EQQFCC7I UNABLE TO SEND MESSAGE: CONTROLLER XCF MEMBER MEMBER IS OFFLINE
| Explanation: The XCF Controller member MEMBER is offline.
| System action: The Data Store cannot communicate with the Controller: sysout cannot be sent back to it.
| User response: Check if the Controller is active or if there are some problems in the XCF connections. One
| possibility is that CTLMEM is incorrectly specified in the DSTOPTS initialization statement.
| EQQFCC9I XCF MEMBER MEMBER HAS JOINED THE GROUP GROUP
| Explanation: An OPC Data Store or Controller FL subtask has joined the XCF group as defined in the DSTOPTS or
| FLOPTS statements.
| System action: None
| User response: None.
| EQQFCCAI STARTING XCF JOIN
| Explanation: The join process between the Data Store and XCF has been started.
| System action: Normal processing continues.
| EQQFCCBI UNABLE TO RETRIEVE JOB JOBNAME: READER TASK INACTIVE
| Explanation: The Controller requested the retrieval of the JOB JOBNAME to the Data Store, but the Data Store
| Reader subtask is not active. The retrieval cannot be performed.
| System action: The request is rejected. Data Store normal processing continues.
| User response: Start the reader task and resubmit the request.

134

Tivoli OPC Messages and Codes

EQQFCM1I EQQFCMHE

| EQQFCM1I STOP IN PROGRESS
| Explanation: The Data Store command task is terminating after a stop request.
| System action: The Data Store waits until the command task is closed.
| EQQFCM2I DATA STORE COMMAND TASK IS BEING STARTED
| Explanation: The command task has been successfully attached.
| System action: The Data Store continues processing. If the startup process is successful, the Command task
| issues its own start message.
| EQQFCM3I DATA STORE COMMAND TASK ENDED
| Explanation: The command task has been requested to stop and is ending normally.
| System action: The command task is terminated and all other active tasks are closed.
| EQQFCMAI NUMBER OF ACTIVE WRITERS: VALUE
| Explanation: This message indicates (by VALUE) the number of writers that are currently running.
| System action: The Data Store continues processing.
| EQQFCMBI WINTERVAL TIME FOR SYSDB WRITERS : VALUE
| Explanation: This message indicates (by VALUE) the current value of the WINTERVAL (interval time in minutes for
| writer) parameter.
| System action: The Data Store continues processing.
| EQQFCMCI MAXSYSL RETURNED SYSOUT LINES: VALUE
| Explanation: This message indicates (by VALUE) the current value of the MAXSYSL (maximum number of sysout
| lines returned to the Controller) parameter.
| System action: The Data Store continues processing.
| EQQFCMDI MAXSTOL STORED SYSOUT LINES: VALUE
| Explanation: This message indicates (by VALUE) the current value of the MAXSTOL (maximum number of sysout
| lines stored in SysDb) parameter.
| System action: The Data Store continues processing.
| EQQFCMFI CLEAN UP INTERVAL TIME: VALUE
| Explanation: This message indicates (by VALUE) the current value of the CINTERVAL (interval time in minutes for
| clean up) parameter.
| System action: The Data Store continues processing.
| EQQFCMGE AN INCORRECT MODIFY COMMAND HAS BEEN IGNORED
| Explanation: The Data Store has detected an invalid modify command.
| System action: The modify command is not processed.
| EQQFCMHE MODIFY COMMAND SYNTAX ERROR
| Explanation: The modify command is syntactically incorrect.
| System action: The modify command is not processed.

Chapter 12. EQQFxxx Messages

135

EQQFCMIE EQQFCUAE

| EQQFCMIE INVALID MODIFY COMMAND PARAMETER VALUE
| Explanation: The parameter value specified for the modify command is incorrect or out of range.
| System action: This command is not processed. The Data Store continues processing.
| EQQFCU1I CLEAN UP TASK STARTED
| Explanation: The clean up data store task has been successfully started. This does not always mean that a clean
| up policy is running (see message EQQFCU3I).
| System action: The Data Store continues processing.
| EQQFCU2I CLEAN UP TASK ENDED
| Explanation: The clean up data store task has been requested to stop and is terminating normally.
| System action: The clean up task is terminated. Data Store normal processing continues.
| EQQFCU3I CLEAN UP TASK RUNNING
| Explanation: The clean up data store task is running. A value other than 0 (zero) was specified for CINTERVAL.
| The clean up policy specified in the CLNPARM member is active.
| System action: The Data Store and clean up task continue processing.
| EQQFCU4I CLEAN UP TASK IN QUIESCE STATUS
| Explanation: The clean up task is in a quiescent status and is waiting until the clean up interval time has elapsed.
| System action: At the end of the clean up interval time, the clean up task is reactivated.
| EQQFCU5E PARAMETER NOT ALLOWED IN DATA STORE CLEAN UP TASK
| Explanation: A statement (or statements) in CLNPARM is invalid because it is applicable only to batch clean up.
| System action: The clean up task is terminated. Data Store normal processing continues.
| User response: Check the CLNPARM statement (or statements). Correct the error and restart the clean up task.
| EQQFCU6I BATCH UTILITY PROCESSING STARTED
| Explanation: The batch program that executes the batch utilities has been successfully started.
| System action: None
| EQQFCU7E PARAMETER PARM NOT ALLOWED IN BATCH CLEAN UP
| Explanation: A statement (or statements) in CLNPARM is invalid because it is applicable only to the data store
| clean up task.
| System action: Batch utility processing is terminated.
| User response: Check the CLNPARM statement (or statements). Correct the error and resubmit the utility.
| EQQFCU8I BATCH UTILITY PROCESSING ENDED
| Explanation: The program that executes the batch utilities is terminating normally.
| System action: The batch utility processing is terminated. Data Store normal processing continues.
| EQQFCUAE CMDPAR: PARM-MEMBER IS EMPTY
| Explanation: No operand is specified in the CMDPAR member.
| System action: The batch utility is not started.
| User response: Check the member. Correct the error and resubmit the request.

136

Tivoli OPC Messages and Codes

EQQFCUBE EQQFCUKI

| EQQFCUBE IMPORT / EXPORT COMMAND WITHOUT DDNAME PARAMETER
| Explanation: The DDNAME parameter was not specified in an Import or Export statement.
| System action: The request is rejected.
| User response: Check the DDNAME parameter. Correct the error and resubmit the utility.
| EQQFCUCE PARAMETER CMDPAR NOT ALLOWED
| Explanation: The CMDPAR parameter is not allowed for this statement.
| System action: The request is rejected.
| User response: Check the parameter. Correct the error and resubmit the utility.
| EQQFCUEE ERROR ON PARAMETER LIBRARY MEMBER CMDPAR
| Explanation: An error was found in the CMDPAR initial parameter member.
| System action: The batch utility is terminated. Previous error messages help you to understand the problem.
| User response: Check the statement. Correct the error and resubmit the utility.
| EQQFCUFE SYNTAX ERROR IN SEARCH CRITERIA CMDPAR
| Explanation: The search condition specified for the CMDPAR statement contains a syntax error (or errors).
| System action: The batch utility is terminated.
| User response: Check the statement. Correct the error and resubmit the utility.
| EQQFCUGW NAME EXCEEDS 8 CHARACTERS
| Explanation: In the search criteria, you specified a Job name or Job ID that is greater than eight characters. This is
| not allowed.
| System action: The name or ID is truncated to eight characters.
| Problem determination: None.
| User response: To use the correct criteria, change the statement and resubmit the utility.
| EQQFCUJI NUMBER OF SYSOUTS/RECORDS EXPORTED: nnn/mmm
| Explanation: This message indicates the total number of selected sysouts and the total number of records written
| into the export file by a single batch export utility.
| System action: The system informs you that the export utility has terminated processing of a single export
| command. Normal batch utilities processing continues.
| EQQFCUHW THE IMPORT FILE IS EMPTY
| Explanation: The import batch utility found an empty import file.
| System action: The batch utility is terminated.
| User response: Check the import file and, if necessary, resubmit the utility.
| EQQFCUKI NUMBER OF SYSOUTS IMPORTED: nnn
| Explanation: This message indicates the total number of sysouts selected from the import file and stored in the
| sysout database by a single batch export utility.
| System action: None

Chapter 12. EQQFxxx Messages

137

EQQFCUMW EQQFJK2E

| EQQFCUMW BAD SYSOUT: SYSOUT KEY IMPORTED
| Explanation: During a batch import utility, a mismatch was detected between the number of records written in the
| import file, for a specific sysout, and the total number of pages stored in the page prefix. The incorrect SYSOUT KEY
| is shown.
| System action: The batch utility does not import the incorrect sysout and continues its normal processing.
| EQQFCUNI NUMBER OF KEYS EXTRACTED: nnn
| Explanation: This message indicates the total number of keys selected from the sysout database and written into an
| output file by a single batch recover primary index utility.
| System action: The system informs you that the recover utility has terminated Normal batch utilities processing
| continues.
| EQQFCUOW THE HEADER RECORD DOESN'T CONTAIN A VALID IDENTIFIER
| Explanation: The first record of an input file found by the import batch utility is not an header record.
| System action: The import utility is terminated.
| User response: Check the import file and, if necessary, resubmit the utility.
| EQQFCUPI CLEAN UP DELETED nnn SYSOUTS
| Explanation: The clean up task has completed the deletion of the specified sysout in accordance with the current
| clean up policy.
| System action: None
| EQQFCUQI EQQCLNPA MEMBER NOT FOUND
| Explanation: This message is issued when the CLNPARM option is not specified in the DSTOPTS statement.
| Default member EQQCLNPA is used, but is not found in the parameter library.
| System action: The clean up task is started, but there is no active policy.
| User response: Specify the CLNPARM option or add the member EQQCLNPA into the parameter library and restart
| the clean up task with the appropriate command.
| EQQFJK1I UNABLE TO WRITE ALL DSID IN SYSDB FOR JOB: JOBNMID
| Explanation: After several retries, a writer task was unable to store all the sysouts in the database for the specified
| job.
| Problem determination: Review earlier messages in the Data Store message log and SYSLOG datasets to
| determine the cause of the error.
| System action: The sysouts are not requeued to their original class. They are kept in the Data Store reserved class
| for a next retry until they are correctly processed or removed manually from the reserved class.
| User response: Contact your system programmer.
| System programmer response: If the error persists, remove the job manually from the reserved class and contact
| your IBM representative.
| EQQFJK2E DATA STORE JESQUEUE TASK INITIALIZATION FAILED
| Explanation: The JES queue task could not acquire all the resources needed for normal operation.
| System action: The JES queue task is not started and all other active tasks are closed. Data Store is terminated.
| Problem determination: Review earlier messages in the Data Store message log to determine the cause of the
| error.
| System programmer response: Correct the errors and restart the Data Store.

138

Tivoli OPC Messages and Codes

EQQFJK3I EQQFJKBE

| EQQFJK3I DATA STORE JESQUEUE TASK INITIALIZATION COMPLETED
| Explanation: The JES queue task has successfully completed its initialization.
| System action: JES queue processing starts.
| EQQFJK4I DATA STORE JESQUEUE TASK ENDED
| Explanation: The JES queue task has been requested to stop and is terminating normally.
| System action: The JES queue task is terminated.
| EQQFJK5I DATA STORE JESQUEUE TASK ENDED DUE TO AN ERROR
| Explanation: The JES queue task has been abnormally stopped.
| System action: The JES queue task is terminated and all other active tasks are closed. The Data Store is
| terminated.
| Problem determination: Review earlier messages in the Data Store message log to determine the cause of the
| error.
| System programmer response: Correct the errors shown by the earlier messages and restart the Data Store.
| EQQFJK6I DATA STORE JESQUEUE TASK WAITING FOR DATABASE TASK END.
| Explanation: The JES queue has received a stop command, but it has some jobs in its queue and the database
| task has to complete the pending requests.
| System action: The JES queue task waits until the database task is terminated.
| EQQFJK7I DATA STORE JESQUEUE TASK CLOSE IN PROGRESS : ANALYSING QUEUE
| Explanation: Before closing, the JES queue task examines its internal queue for the last time to close all pending
| situations.
| System action: None.
| EQQFJK9I JOBNMID CANNOT BE REQUEUED TO ORIGINAL CLASS: DEFAULT CLASS IS USED.
| Explanation: The original class specified for the requeue operation is reserved. The requeue operation for the
| JOBNMID job is forced in the default class.
| System action: JES queue processing continues.
| EQQFJKAI ORIGINAL CLASS NOT FOUND: JOBNMID REQUEUED TO DEFAULT CLASS
| Explanation: The original class specified for the requeue operation was not found. The requeue operation for the
| JOBNMID job is forced in the default class.
| System action: JES queue processing continues.
| EQQFJKBE SSI FUNCTION 79 ENDS IN ERROR. RETURN CODE RC79 REASON CODE RSC79
| Explanation: The subsystem interface (SSI) function 79 returned an error with return code RC79 and reason code
| RSC79. The JES queue task could not continue processing.
| System action: The JES Queue task terminates and all other active tasks are closed.
| User response: Contact your system programmer.
| System programmer response: Contact your IBM representative.

Chapter 12. EQQFxxx Messages

139

EQQFSD1I EQQFSF2I

| EQQFSD1I SYSOUT DATABASE ERROR HANDLER TASK STARTED
| Explanation: The sysout database error handler task is being started.
| System action: The Data Store initialization process continues.
| EQQFSD2I SYSOUT DATABASE ERROR HANDLER TASK ENDED
| Explanation: The sysout database error handler task has been requested to stop and it has terminated normally.
| System action: The sysout database error handler task is terminated.
| EQQFSD3E DATABASE ERROR HANDLER DETECTED SUBTASK FAILURE
| Explanation: The error handler task that coordinates data file activities has detected a subtask failure.
| Problem determination: Review earlier messages in the Data Store message log and SYSLOG datasets to
| determine the cause of the error.
| User response: Contact your system programmer.
| System programmer response: If possible correct all errors and restart the Data Store. If the error persists, contact
| your IBM representative.
| EQQFSD4I SYSOUT DATABASE STARTING
| Explanation: The sysout database is being started.
| System action: The Data Store initialization process continues.
| EQQFSD5I SYSOUT DATABASE INITIALIZATION COMPLETE
| Explanation: The sysout database has successfully completed its initialization.
| System action: The sysout database is now active.
| EQQFSD6I SYSOUT DATABASE TERMINATING
| Explanation: A stop request was issued to close the sysout database.
| System action: The sysout database is shut down.
| EQQFSD7I SYSOUT DATABASE STOPPED
| Explanation: A stop request was accepted and completed by the sysout database.
| System action: The sysout database is now stopped.
| EQQFSD8W WARNING MESSAGES WERE ISSUED DURING OPERATION ON DATA FILE DATAFILE
| Explanation: This message is displayed during the close process of the Data Store and indicates that an error was
| found during an operation on the DATAFILE data file.
| Problem determination: Review earlier messages in the Data Store message log and SYSLOG datasets to
| determine which operation failed or the cause of the error.
| EQQFSF1I DATA FILE DATAFILE INITIALIZATION COMPLETED
| Explanation: The initialization process of the DATAFILE data file task was completed successfully.
| System action: The DATAFILE data file can be used to store sysout data.
| EQQFSF2I DATA FILE DATAFILE TERMINATION COMPLETED
| Explanation: The DATAFILE data file task termination process has been completed.
| System action: The DATAFILE data file is closed.

140

Tivoli OPC Messages and Codes

EQQFSF3E EQQFSR0E

| EQQFSF3E UNABLE TO ALLOCATE AND FORMAT SPACE MAP
| Explanation: An error occurred when allocating storage to build and format the space map.
| System action: Data Store initialization is stopped.
| System programmer response: The allocation in the data file is too small (a minimum of two tracks is needed).
| Correct the values in the allocation JCL, reallocate the data file and restart the Data Store.
| EQQFSF4W INVALID PAGE - FILENUM RBN
| Explanation: During clean up an invalid page was detected for one of the following reasons:
|
|

the RBN is out of range
the page status is deleted, but the corresponding bit of the space map is on.

| The message shows the data file number FILENUM and the RBN stored in the page prefix.
| System action: The clean up resets the corresponding bit of the space map.
| EQQFSF5I UNABLE TO EXTEND DATA FILE DATAFILE - DATA FILE DISABLED
| Explanation: An error occurred when trying to extend the data file number DATAFILE.
| System action: The data file was flagged as disabled and cannot be used to store sysout data. The store
| operations continue on the next available data file. If no more data files are available, the Data Store is terminated.
| System programmer response: Do a minimum of one of the following actions:
|
|
|

To make more space available, shorten the clean up task interval (CINTERVAL)
Stop the Data Store, increase the size of the current data store files, and restart the Data Store.
Allocate additional data files and restart the Data Store.

| EQQFSK1I PRIMARY KEY FILE INITIALIZATION COMPLETED
| Explanation: The initialization process of the primary key file task was completed successfully.
| System action: The primary key file can be used to store sysout data.
| EQQFSK2I PRIMARY KEY FILE TERMINATION COMPLETED
| Explanation: The primary key file task termination process has been completed.
| System action: The primary key file is closed.
| EQQFSK3I GENERIC I/O ERROR DURING OPEN VSAM FILE
| Explanation: A VSAM Open operation failed.
| System action: The Data Store is terminated.
| Problem determination: Review earlier messages in the Data Store message log and SYSLOG datasets to
| determine the cause of the error. One possibility is that you have insufficient authorization on that VSAM file.
| User response: Contact your system programmer.
| System programmer response: If possible correct all errors and restart the Data Store. If the error persists, contact
| your IBM representative.
| EQQFSR0E DATA STORE READER TASK INITIALIZATION FAILED
| Explanation: The reader task could not acquire all the resources needed for normal operation.
| System action: The reader task is not started.
| Problem determination: Review earlier messages in the Data Store message log to determine the cause of the
| error.
| System programmer response: Correct the errors and restart the submit task.

Chapter 12. EQQFxxx Messages

141

EQQFSR1I EQQFSW2I

| EQQFSR1I DATA STORE READER TASK INITIALIZATION COMPLETED
| Explanation: The reader task has successfully completed its initialization.
| System action: Reader processing starts.
| User response: None.
| EQQFSR2I DATA STORE READER TASK ENDED
| Explanation: The reader task has been requested to stop and is terminating normally.
| System action: The reader task is terminated.
| System programmer response: None.
| EQQFSR3I DATA STORE IS ATTEMPTING TO COMMUNICATE WITH CONTROLLER
| Explanation: During a retrieval request processing, communication was lost between the Controller and the Data
| Store. The Data Store retries three times, at 5-second intervals, to retransmit the joblog.
| System action: None
| System programmer response: If the error persist, check the reason for the communication failure.
| EQQFSR4I JOB JOBNMID NOT FOUND NEITHER IN SYSDB NOR IN JES QUEUE
| Explanation: The reader has received a request for a job that is not stored either on SysDb (Not Found from SysDb
| services) or on the JES queue. The reader is unable to return the requested job.
| System action: The job log retrieval request fails.
| System programmer response: Check the job log status, for example, the job was not routed to the reserved class.
| EQQFSR5I TIMEOUT REACHED DURING SEARCH OF JOB: JOBNMID
| Explanation: The job log retrieval request reached the maximum allowed time (see QTIMEOUT statement). The
| reader is unable to return the requested job.
| System action: The job log retrieval request fails.
| EQQFSW0E DATA STORE WRITER TASK INITIALIZATION FAILED
| Explanation: The writer task could not acquire all the resources needed for normal operation.
| System action: The writer task is not started.
| Problem determination: Review earlier messages in the Data Store message log to determine the cause of the
| error.
| System programmer response: Correct the errors and restart the submit task.
| EQQFSW1I DATA STORE WRITER TASK INITIALIZATION COMPLETED
| Explanation: The writer task has successfully completed its initialization.
| System action: Writer processing starts.
| User response: None.
| EQQFSW2I DATA STORE WRITER TASK ENDED
| Explanation: The writer task has been requested to stop and is terminating normally.
| System action: The writer task is terminated.
| System programmer response: None.

142

Tivoli OPC Messages and Codes

EQQFSW3I EQQFSW4I

| EQQFSW3I DATA STORE WRITER TASK ENDED DUE TO AN ERROR
| Explanation: The writer task has been abnormally stopped.
| System action: The writer task is terminated.
| Problem determination: Review earlier messages in the Data Store message log to determine the cause of the
| error.
| System programmer response: Correct the errors shown by the earlier messages and restart the indicated task.
| EQQFSW4I JOB: JOBNAME - JOBNAME(DDN) INVALID SYSOUT
| Explanation: The writer has received an empty dataset (dynamically allocated). DDN is returned to JES, but is
| always equal to JESMSGLG for the three DSIDs of the job log. This message is displayed once for each DSID found
| for the job.
| System action: The writer task skips to another job log that is to be stored.
| System programmer response: None.

Chapter 12. EQQFxxx Messages

143

144

Tivoli OPC Messages and Codes

EQQG001I EQQG004E

Chapter 13. EQQGnnn Messages
EQQG001I SUBTASK SUBTASK HAS STARTED
Explanation: The subtask SUBTASK has been successfully initialized.
System action: Processing for the indicated subtask is started.
User response: None.
EQQG002E INITIALIZATION OF SUBTASK SUBTASK FAILED. REASON CODE: RS
Explanation: The indicated subtask could not acquire all the resources needed for normal operation.
System action: Processing continues but no requests from the dialog or the program interface for Tivoli OPC can be
served.
Problem determination: The message variable RS can have the following values:
02
11
12
13
14
15
16
17
18
19

The
The
The
The
The
The
The
The
The
The

main task, the normal mode manager, is unavailable.
application description file is unavailable.
workstation description file is unavailable.
calendar file is unavailable.
period file is unavailable.
all workstations closed record is unavailable.
operator instruction file is unavailable.
JCL variables file is unavailable.
resource description file is unavailable.
ETT criteria file is unavailable.

User response: Review earlier messages in the Tivoli OPC message log to determine the cause of the error.
System programmer response: Correct errors shown by the earlier messages and restart the subtask indicated.
EQQG003I SUBTASK SUBTASK HAS ENDED
Explanation: This message is issued when the Tivoli OPC subsystem is being stopped by an operator command.
System action: Tivoli OPC termination processing continues.
User response: None.
EQQG004E SUBTASK SUBTASK ABENDED, IT IS RESTARTED AT RETRYAT
Explanation: A serious error caused the SUBTASK subtask to end abnormally. SUBTASK has been able to restart,
at RETRYAT.
System action: SUBTASK resumes normal processing, but one or more requests for service may have been
rejected. The dialog user requesting service may or may not be informed about the completion or termination of the
requests. A dump is created. Message EQQX271E, when issued, informs the dialog user that the request has failed
due to a serious error in SUBTASK. If the subtask is GENERAL SERVICE, the dialog user must press “attention” to
break the request.
Problem determination: Review the dump dataset to determine what caused the problem.
User response: Inform the system programmer about the error and, (if the error can be reproduced), of the
sequence of dialog requests leading to the error.
System programmer response: Collect relevant information about the sequence of events leading to this error,
make the dump dataset and the message log available for inspection, and contact your IBM representative.

 Copyright IBM Corp. 1991, 1999

145

EQQG005E EQQG010I

EQQG005E VALIDATION FAILED FOR FILE: FILE, REASON: REASON, OFFSET: POS
Explanation: The record that was to be written to the Tivoli OPC database was rejected because it was incorrect.
System action: No update to the database is made.
Problem determination: FILE gives the database on which the update was attempted, REASON indicates the
reason for the failure, and POS indicates the failing position in hexadecimal form within the record.
See Chapter 39, “Reason Codes” on page 539 for a list of the reason codes and their meanings.
User response: Look in the dump dataset (ddname EQQDUMP) for further information about the error. This dataset
contains the record and the position of the error. If you cannot find a valid reason for the error, contact your system
programmer.
System programmer response: If you cannot find a valid reason for the error, make the dump dataset (ddname
EQQDUMP) and the message log available for inspection. Contact your IBM representative.
EQQG006I THE FUNC FUNCTION IS ACTION BY USER
Explanation: This message confirms and logs some action taken to a Tivoli OPC function. FUNC is either
AUTOMATIC JOB RECOVERY or JOB SUBMISSION. ACTION is either ACTIVATED or DEACTIVATED. USER is
the user ID of the user who requested the function. The message confirms that the dialog request has been
successfully accomplished.
System action: Processing continues.
User response: None.
EQQG008W THE REQUEST FAILED, GENERAL SERVICE QUEUING PROBLEM, REASON: XSSRS
Explanation: The request was rejected because of an interface problem in the General Service function.
System action: The system waits for you to respond.
Problem determination: Review the Tivoli OPC message log for errors related to General Service to determine the
cause of the error.
User response: Try again. If the error persists, contact your system programmer.
System programmer response: Correct the General Service error given in the Tivoli OPC message log.
EQQG009W INSUFFICIENT VIRTUAL STORAGE FOR THE COMPLETE LIST, REASON: XSSRS
Explanation: The requested list could not be displayed because the amount of virtual storage in the dialog address
space was not sufficient.
System action: A partial list is displayed, or no list at all.
User response: If this is a request from a dialog function in which a selection criterion can be specified, change the
selection criterion to select fewer items. Increase the region size at TSO logon.
EQQG010I GENERAL SERVICE REQUEST STATISTICS FOLLOW:
TYPE
TOTAL NEWRQS TOTTIME NEWTIME TOTAVG

NEWAVG

146

The request for which data was gathered.
The total number of requests of this type.
The number of requests of this type since the last message.

Tivoli OPC Messages and Codes

EQQG010I EQQG010I

TOTTIME
NEWTIME
TOTAVG
NEWAVG

The
The
The
The

total time, in seconds, used to process this request.
total time, in seconds, used to process this request since the last message.
average time, in seconds, used to process a request of this type.
average time, in seconds, used to process a request of this type since the last message.

The value in the TYPE column is one of the following resources:
ALL
AD
AR
PERI
CALE
WSCL
WSD
LTPS
PLAN
WS
WSRL
RL
OPER
OPRL
PREP
DEPC
R3P
C3C
C3CR
CP_G
JCL
JSUB
JCLA
JCLP
JCLT
JVAR
JV
RACF
SRES
ETT
OI
STAT
MCP
DEP
CATM
OTHR

Total line for all resources
Application description
Automatic recovery
Calendar periods
Calendar
All workstations closed
Workstation description
Long-term plan
Long-term plan status
Current plan workstation status
Current plan workstation status requested from the ready list
Current plan ready list
Current plan operation
Current plan operation requested from the ready list
Preparation CPU operations
Dependency operation
Current plan operation record
Current plan occurrences
Current plan occurrences requested from the ready list
Current plan general
JCL Repository record
Job submission
Automatic JCL preparation
Promptable JCL variables
JCL tailoring
Tailoring session
JCL variable table
Refresh RACF resources
Special resources
Event-triggered tracking
Operator instruction
Tivoli OPC status record
Modify current plan
Successor candidates
Catalog management
All other resources

System action: Normal Tivoli OPC processing continues.
User response: None.

Chapter 13. EQQGnnn Messages

147

EQQG011I EQQG013I

EQQG011I TYPE

NUMRQ NEWRQ

TTOT

TNEW

TAVG NAVG

nnnnn
secs

A 5-digit number.
The number of seconds.

The message contains data about how the general service subtask processed requests for one resource. See the
description of message EQQG010I for an explanation of what the data values mean.
System action: Normal Tivoli OPC processing continues.
User response: None.
EQQG012I GENERAL SERVICE QUEUE STATISTICS FOLLOW:
TYPE
TOTAL
Q1
Q2
Q5 Q10 Q20

Q50

Q100

>100

Explanation: This message is issued if the GENERAL SERVICE task statistics are active. This can be done either
by specifying the STATMSG(GENSERV) keyword in the JTOPTS initialization statement or with the modify command,
/F subsys,GENSTA=ON.
If any requests have been processed, this message is issued every n minutes, where n is either the value specified in
the JTOPTS keyword STATIM, if it has a nonzero value, or the default of 30.
The message shows the size and delay of the General Service queue since the message was last issued.
The value below the TYPE heading can be either QUEUE SIZE or QUEUE DELAY. The value below the TOTAL
heading gives the total number of times that the General Service queue was emptied. The values below the Qx
headings give the number of times that either the length of the queue or the time spent waiting for General Service
processing, was in a particular interval. For example, Q20 on the queue size line gives the number of times that the
queue size was between 11 and 20 requests.
System action: Normal Tivoli OPC processing continues.
User response: None.
EQQG013I TYPE TOTSZ Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8
Explanation: This message is issued if the GENERAL SERVICE task statistics are active. This can be done either
by specifying the STATMSG(GENSERV) keyword in the JTOPTS initialization statement or with the modify command,
/F subsys,GENSTA=ON.
If any requests have been processed, this message is issued every n minutes, where n is either the value specified in
the JTOPTS keyword STATIM, if it has a nonzero value, or the default of 30.
In the message text shown above:

nnnnn

A 5-digit number.

This message contains data about the General Service queue size. See the description of message EQQG012I for
an explanation of what the data values mean.
System action: Normal Tivoli OPC processing continues.
User response: None.

148

Tivoli OPC Messages and Codes

EQQG014W EQQG107I

EQQG014W REQUEST TERMINATED BECAUSE TIME LIMIT IS EXCEEDED
Explanation: A general service request has terminated because the requesting process: a program interface (PIF)
program or a dialog user, did not respond within 10 minutes.
System action: Processing continues.
User response: None.
EQQG015W REQUEST TERMINATED - REQUESTOR NO LONGER CONNECTED
Explanation: A general service request was terminated because the requesting process: a program interface (PIF)
program or a dialog user, is no longer connected to the general service subtask. The connection can be lost if the
requestor is canceled, or if a dialog user presses the ATTN (attention) key, after a request for service has been sent
to the controller and before a response has been received.
System action: Processing continues.
User response: None.
EQQG100E GDDM COULD NOT BE LOADED
Explanation: When requesting a graph, Tivoli OPC could not load GDDM*.
System action: The graph request is ignored. Processing continues.
User response: Contact your system programmer.
System programmer response: Make sure that the GDDM load library is part of ISPLLIB.
EQQG104W POSITION THE CURSOR ON AN ELEMENT IN THE GRAPHICAL AREA
Explanation: A graph selection command has been given, but the cursor was not located in the graphical area.
System action: The command is ignored. Processing continues.
User response: Position the cursor in the graphical area at or close to the element to be selected and reissue the
command.
EQQG105E DUMMY NODES ARE NOT VALID, REPOSITION CURSOR
Explanation: This node is a dummy node and as such has no data related to it.
System action: The system waits for you to respond.
User response: Specify another node for processing.
EQQG106I THE SPECIFIED ATTRIBUTE MUST BE NUMERIC. SEE GDDM MANUALS
Explanation: An invalid graphical attribute has been given.
System action: The attribute panel is redisplayed and prompts you for a correct attribute value.
User response: Correct the invalid attribute.
EQQG107I THE GDDM IS NOT ALLOWED IN SPLIT SCREEN MODE
Explanation: The GDDM is not allowed in split-screen mode.
System action: The call to GDDM is disabled.
User response: Set the screen in single-screen mode and repeat the command.

Chapter 13. EQQGnnn Messages

149

EQQG109E EQQG109E

EQQG109E NET LOADER MODULE COULD NOT BE LOADED
Explanation: When requesting a graph, Tivoli OPC could not load the net building routine.
System action: The graph request is ignored. Processing continues.
User response: Contact your system programmer.
System programmer response: Make sure that the ISPLLIB libraries are updated to contain the graph net building
routines. The name of the routine can be seen in the ISPF log. See message EQQX009.

150

Tivoli OPC Messages and Codes

EQQH001E EQQH205E

Chapter 14. EQQHnnn Messages
EQQH001E THE NETVIEW INTERFACE MODULE CNMNETV COULD NOT BE LOADED
Explanation: CNMNETV was not found in the library search path.
System action: Tivoli OPC continues, but the generic alert functions as requested in the GENALERT keyword of the
ALERT initialization statement are disabled. Instead, Tivoli OPC generates WTO messages for the error conditions
specified in the GENALERT keyword.
System programmer response: Ensure that the CNMNETV module is accessible and restart Tivoli OPC.
EQQH003E SEND GENERIC ALERT TO NETVIEW FAILED WITH RC=RC
Explanation: Request type 12 sent to the NetView* PPI failed.
System action: A WTO is issued instead of the generic alert.
System programmer response: Check NetView documentation for further information.
EQQH201W AN INCORRECTLY PLACED COMMA AT H20101 IS IGNORED
Explanation: You have coded a comma that is not required at H20101.
System action: The statement is accepted. The extraneous comma is ignored. Tivoli OPC continues verifying the
statements.
User response: If you rerun the job, remove the extra comma.
EQQH202W AN INCORRECTLY PLACED COMMA IN THE PARMSTRING IS IGNORED
Explanation: An unnecessary comma is coded in the parameter.
System action: The parameter is accepted and the extraneous comma is ignored. The Tivoli OPC continues
verifying the commands
User response: Remove the extra comma and rerun.
EQQH203E THE KEYWORD H20301 APPEARS TOO MANY TIMES
Explanation: A statement is specified with two or more identical keywords.
System action: Tivoli OPC continues to verify the statement, but the database is not updated.
User response: Remove the duplicate keyword and rerun.
EQQH204E THE STATEMENT H20401 IS UNDEFINED
Explanation: The statement H20401 is not recognized.
System action: Processing of the statement is terminated.
User response: Correct the invalid statement and rerun.
EQQH205E THE COMMAND IS MISSING OR THE FORMAT IS INVALID
Explanation: The statement does not start with a valid command.
System action: Processing of the statement is terminated.
User response: Add a valid command or correct the invalid command and rerun.

 Copyright IBM Corp. 1991, 1999

151

EQQH206W EQQH214E

EQQH206W A MISSING END OF COMMENT IS ASSUMED AT THE END OF THE STATEMENT
Explanation: A start of comment delimiter (/*) has been detected, without a corresponding end of comment (*/).
System action: Tivoli OPC assumes the comment ends after the control statement.
User response: Add an end of comment (*/) and rerun if required.
EQQH207W A MISSING END QUOTE IS ASSUMED AT THE END OF THE STATEMENT
Explanation: The quote for this character string is not closed.
System action: Tivoli OPC assumes the quote ends after the control statement.
User response: Add a quote and rerun if required.
EQQH208E THE KEYWORDS H20801 AND H20802 ARE EXCLUSIVE
Explanation: Two mutually exclusive keywords are entered on the same statement.
System action: Processing of the statement is terminated.
User response: Remove one of the keywords and rerun.
EQQH209E AN INVALID RIGHT PARENTHESIS WAS FOUND AT H20901
Explanation: More right parentheses than left parentheses are coded.
System action: Processing of the statement is terminated.
User response: Correct the number of parentheses and rerun.
EQQH210E TOO MANY VALUES ARE CODED IN THE KEYWORD H21001
Explanation: The keyword H21001 has too many coded values.
System action: Processing of the statement is terminated.
User response: Correct the keyword values and rerun.
EQQH211E AN INVALID VALUE H21101 SPECIFIED OR A KEYWORD IS MISSPELLED
Explanation: Either the value H21101 is not valid for the keyword or the keyword is misspelled.
System action: Processing of the statement is terminated.
User response: Correct the statement and rerun.
EQQH213E A VALUE IS MISSING AFTER H21301
Explanation: Not enough keyword values are specified for H21301.
System action: Processing of the statement is terminated.
User response: Add the missing keyword value (or values) and rerun.
EQQH214E TOO MANY LEFT PARENTHESES OR AN INVALID VALUE FOUND AT H21401
Explanation: Too many parentheses are provided at H21401 or you have provided an invalid value for a keyword.
System action: Processing of the statement is terminated.
User response: Correct the statement and rerun.

152

Tivoli OPC Messages and Codes

EQQH215E EQQH222E

EQQH215E TOO MANY LEFT PARENTHESES ARE INSERTED IN THE PARMSTRING
Explanation: Too many left parentheses are provided.
System action: Processing of the statement is terminated.
User response: Remove the extra left parentheses and rerun.
EQQH216E A LEFT PARENTHESIS IS MISSING BEFORE H21601
Explanation: A left parenthesis is missing.
System action: Processing of the statement is terminated.
User response: Add the missing left parenthesis and rerun.
EQQH217E AN INVALID COMMA IS INSERTED IN H21701
Explanation: A keyword and its values are separated by an invalid comma.
System action: Processing of the statement is terminated.
User response: Remove the comma and rerun.
EQQH218W A MISSING RIGHT PARENTHESIS IS ASSUMED AT THE END OF THE STATEMENT
Explanation: The right parenthesis, which should delimit the end of statement, is missing. Too many items might be
specified.
System action: The processing continues.
User response: Specify the keyword and its value in the correct format and rerun.
EQQH219E THE REQUIRED KEYWORD H21901 IS MISSING
Explanation: The keyword H21901 is missing from the statement.
System action: Processing of the statement is terminated.
User response: Specify the missing keyword and rerun.
EQQH220E A REQUIRED KEYWORD IS MISSING. SPECIFY EITHER H22001 OR H22002
Explanation: You must specify either H22001 or H22002.
System action: Processing of the statement is terminated.
User response: Specify one of the keywords and rerun.
EQQH221E AN INVALID H22101 H22102 WAS FOUND IN THE KEYWORD H22103
Explanation: The value type H22101 in field H22102 for keyword H22103 is invalid.
System action: Processing of the statement is terminated.
User response: Specify a valid value and rerun.
EQQH222E AT LEAST ONE KEYWORD MUST BE SPECIFIED FOR STATEMENT H22201
Explanation: You must specify at least one keyword for H22201.
System action: Processing of the statement is terminated.
User response: Correct the command and rerun.

Chapter 14. EQQHnnn Messages

153

EQQH223E EQQH306W

EQQH223E THE EMPTY QUOTED STRING IS INVALID FOR THE KEYWORD H22301
Explanation: No values are specified for keyword H22301.
System action: Processing of the statement is terminated.
User response: Correct the string and rerun.
EQQH224E REQUIRED KEYWORD(S) MISSING IN COMMAND H22401
Explanation: One or more required keywords were not found in the statement H22401.
System action: Processing of the statement is terminated.
User response: Correct the statement and rerun.
EQQH301E NUMERIC FACTOR H30101 EXCEEDS CYCLE H30102 LENGTH
Explanation: A numeric factor is out of range.
System action: The rule is invalid and is not saved.
User response: Correct the numeric factor or cycle specification and rerun.
EQQH302E NUMERIC FACTOR H30201 AND WEEKDAY > CYCLE H30202 LENGTH
Explanation: A numeric factor combined with a week day exceeds the period length. The name of a predefined
cycle is preceded by two unprintable characters (..).
System action: The rule is invalid and is not saved.
User response: Correct the numeric factor or cycle specification and rerun.
EQQH303E THE USER PERIOD H30301 DOES NOT EXIST
Explanation: The specified user period is invalid. The name of OPC predefined cycles is preceded by two
unprintable characters (..).
System action: The rule is invalid and is not saved.
User response: Correct the period specification and rerun.
EQQH304E THE CALENDAR H30401 DOES NOT EXIST
Explanation: The specified calendar H30401 is invalid.
System action: The rule is invalid and is not saved.
User response: Correct the calendar specification and rerun.
EQQH305E ORIGIN SHIFT H30501 IS TOO LARGE FOR THE PERIOD H30502.
Explanation: The number specified for origin shift is out of range for period H30501. The name of OPC predefined
cycles is preceded by two unprintable characters (..).
System action: The rule is invalid and is not saved.
User response: Correct the origin shift or period specification and rerun.
EQQH306W SELECTION OF EVERY AND FIRST/LAST - INTERPRETED AS EVERY
Explanation: You have selected both EVERY and FIRST (or numeric 1) or EVERY and LAST during the definition of
a rule. The rule is interpreted as EVERY without any numeric factor. This may not be what you intended.
System action: The system waits for you to respond.
User response: Decide whether the rule should be defined using EVERY or ONLY. Change the selected fields if
required. If you are unsure of the affect of EVERY and ONLY use the GENDAYS command.

154

Tivoli OPC Messages and Codes

EQQH308W EQQH502E

EQQH308W DUPLICATE VALUE(S) H30801 IGNORED.
Explanation: You have specified duplicate values. Only one of the values is used.
System action: The duplicate value is removed.
User response: Check the specified values and correct them if necessary.
EQQH309E THE SAVED RULE VALUE HAS BEEN DESTROYED, PLEASE REENTER THE INFO
Explanation: The rule value saved on the application description database is invalid and cannot be used.
System action: The rule is invalid and must be reentered before use.
Problem determination: The dump dataset (ddname EQQDUMP) contains a dump of the rule value.
User response: Reenter the rule and rerun.
EQQH310E UNEXPECTED ERROR IN THE CALENDAR ROUTINE
Explanation: The calendar routine used in the rule interpretation or date generation has returned an unexpected
reason code.
System action: Processing of this specific rule cannot continue.
Problem determination: The dump dataset (ddname EQQDUMP) contains a dump of the control blocks.
User response: This is likely to be an internal error. If possible, rerun the request.
System programmer response: If you cannot find a valid reason for the error, save the dump dataset and the
message log and contact your IBM representative.
EQQH401I NO DATE GENERATED BY THIS RULE
Explanation: No date is generated by this rule.
System action: No dates are generated.
User response: Check the rule and the validity period.
EQQH402W THE PERIOD H40201 HAS NO ORIGIN WITHIN RULE VALIDITY.
Explanation: The period H40201 has no origin within rule validity period.
System action: No dates are generated.
User response: Correct the period specification or validity period and rerun.
EQQH501E NUMERIC FACTOR H50101 EXCEEDS CYCLE H50102 LENGTH
Explanation: A numeric factor is out of range.
System action: The rule is invalid and is not saved.
User response: Correct the numeric factor or cycle specification and rerun.
EQQH502E NUMERIC FACTOR H50201 TOGETHER WITH WEEKDAY EXCEEDS CYCLE H50202 LENGTH
Explanation: A numeric factor combined with a week day exceeds the period length. The name of a predefined
cycle is preceded by two unprintable characters (..).
System action: The rule is invalid and is not saved.
User response: Correct the numeric factor or cycle specification and rerun.

Chapter 14. EQQHnnn Messages

155

EQQH503E EQQH511E

EQQH503E THE USER PERIOD H50301 DOES NOT EXIST
Explanation: The specified user period is invalid. The name of OPC predefined cycles is preceded by two
unprintable characters (..).
System action: The rule is invalid and is not saved.
User response: Correct the period specification and rerun.
EQQH504E THE CALENDAR H50401 DOES NOT EXIST
Explanation: The specified calendar H50401 is invalid.
System action: The rule is invalid and is not saved.
User response: Correct the calendar specification and rerun.
EQQH505E ORIGIN SHIFT H30501 IS TOO LARGE FOR THE PERIOD H30502.
Explanation: The number specified for origin shift is out of range for period H50501. The name of a predefined
cycle is preceded by two unprintable characters (..).
System action: The rule is invalid and is not saved.
User response: Correct the origin shift or period specification and rerun.
EQQH509E THE SAVED RULE VALUE HAS BEEN DESTROYED, PLEASE REENTER THE INFORMATION
Explanation: The rule value saved on the application description database is invalid and cannot be used.
System action: The rule is invalid and must be reentered before use.
Problem determination: The dump dataset (ddname EQQDUMP) contains a dump of the rule value.
User response: Reenter the rule and rerun.
EQQH510E UNEXPECTED ERROR IN THE CALENDAR ROUTINE
Explanation: The calendar routine used in the rule interpretation or date generation has returned an unexpected
reason code.
System action: Processing of this specific rule cannot continue.
Problem determination: The dump dataset (ddname EQQDUMP) contains a dump of the control blocks.
User response: This is likely to be an internal error. If possible, rerun the request.
System programmer response: If you cannot find a valid reason for the error, save the dump dataset and the
message log and contact your IBM representative.
EQQH511E CALENDARS DATASPACE CREATION FAILED
Explanation: An error occurred while the batch program or the normal mode manager subtask was trying to create
the calendar dataspace.
System action: The job or the normal mode manager is terminated.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause and if the error persists, contact your IBM representative.

156

Tivoli OPC Messages and Codes

EQQH700I EQQH707E

EQQH700I HIGHEST RETURN CODE FROM PARSER IS H70001
Explanation: This information message is displayed after parsing a date generating rule. The short message is set
to 'VALID RULE' if the parser returns 04 or lower, 'INVALID RULE' for all other return codes. The return code value is
shown in H70001. This message is followed by one or more information or warning messages for a valid rule, and by
up to five error messages for an invalid rule.
System action: If 'VALID RULE' is returned, the date generating rule definition is accepted. If 'INVALID RULE' is
returned, the rule is rejected.
User response: If the rule is rejected, correct the rule definition according to the diagnostics provided by the
messages.
EQQH701E EITHER ONLY OR EVERY MUST BE SELECTED
Explanation: ONLY and EVERY are mutually exclusive and one of them has to be selected for a valid rule definition.
System action: The request is rejected.
User response: Select one of ONLY and EVERY.
EQQH702E MAKE AT LEAST ONE SELECTION/SPECIFICATION FROM EACH RULE SECTION
Explanation: You have failed to make at least one selection/specification from each rule section.
System action: The request is rejected.
User response: Select at least one from each section.
EQQH703E THE ENTRY IS INVALID, ENTER XRSEL OR LEAVE BLANK
Explanation: You have entered an invalid value in the selection field.
System action: The request is rejected.
User response: Change the field to a valid value.
EQQH704E THE ENTRY IS INVALID, ENTER A DAY IN THE RANGE 1 TO 999
Explanation: You have entered an invalid day in the field. It must be in the range 1 to 999.
System action: The request is rejected.
User response: Change the day to a valid value.
EQQH705E A PERIOD NAME BEGINS ALPHABETICALLY, REMAINDER IS ALPHANUMERIC
Explanation: You have not entered a valid period name. A valid period name must be maximum of eight characters,
where the first character must be alphabetical and the remaining characters must be alphanumeric or national.
System action: The request is rejected.
User response: Specify a valid period name.
EQQH706E THE ENTRY IS INVALID, ENTER A VALUE IN THE RANGE 1 TO 53
Explanation: You have entered an invalid week number in the field. It must be in the range 1 to 53.
System action: The request is rejected.
User response: Change the week number to a valid value.
EQQH707E THE ENTRY IS INVALID, ENTER A NUMBER IN THE RANGE 0 TO 999
Explanation: You have entered an invalid number in the field. It must be in the range 0 to 999.
System action: The request is rejected.
User response: Change the number to a valid value.

Chapter 14. EQQHnnn Messages

157

EQQH708E EQQH711E

EQQH708E H70801 TOGETHER WITH SPECIFIC H70801 SELECTION(S) IS AMBIGUOUS
Explanation: Message variable H70801 is DAY, WEEK or MONTH. You have selected one of the following
combinations:
DAY together with specific days, for example, WORKDAY, MONDAY, FRIDAY
WEEK together with specific week numbers, for example, WEEK 26 and WEEK 34
MONTH together with specific months, for example, APRIL, AUGUST and DECEMBER.
These specifications are redundant and make the rule ambiguous.
System action: The request is rejected.
User response: Remove the redundancies to make the selection unambiguous.
EQQH709E RULE DEFINITION CANNOT BE MAPPED, THE RULE MUST BE REDEFINED
Explanation: The internal representation of a rule cannot be interpreted and the corresponding rule command cannot
be derived from it. This is most likely caused by an internal OPC error.
System action: The rule command is not mapped and rule selections are not shown.
User response: Copy the application description (AD) temporarily to another AD identification. Update the original
AD by redefining the erroneous rule so as to be able to continue using the original rule or rules. Contact your local
IBM representative to pursue the error analysis using the copied version.
EQQH710I NO DATES GENERATED FOR THE INTERVAL IVLFROM IVLTO
Explanation: GENDAYS is unable to generate dates for the rule and interval specified.
System action: No dates are generated.
User response: Check the rule definitions and other factors that have an impact on date generation, for example,
interval, calendar, user periods, and free day rule.
EQQH711E INTERVAL START IVLFROM IS LATER THAN INTERVAL END IVLTO
Explanation: The start date of the generating interval is later than the end date.
The start date of the interval is the latest of these dates:
Run cycle in-effect date
Application description (AD) valid-from date
1 January of the current year.
The end date of the interval is the earliest of these dates:
Run cycle out-of-effect date
AD valid-to date
31 December of the current year plus three years.
A maximum of four years can be displayed.
System action: The request is rejected.
User response: Check the dates, correct any inconsistency, and reenter the GENDAYS command.

158

Tivoli OPC Messages and Codes

EQQH712E EQQH712E

EQQH712E UNABLE TO GENERATE DATES FOR THE INTERVAL IVLFROM IVLTO
Explanation: GENDAYS is not able to generate dates for the rule because the entire requested interval is outside
the limits of the internal calendar
When the interval is calculated:
The start date of the interval is the later of the run cycle in-effect date and the application description (AD)
valid-from date.
The end date of the interval is the earlier of the run cycle out-of-effect date and the AD valid-to date.
GENDAYS can generate a maximum of four years starting at 1 January of the current year and ending on 31
December of the current year plus three.
System action: The request is rejected.
User response: Check the dates for the interval, correct any inconsistency, and reenter the GENDAYS command.

Chapter 14. EQQHnnn Messages

159

160

Tivoli OPC Messages and Codes

EQQIC00I EQQIC03E

Chapter 15. EQQICnn Messages
EQQIC00I FILE FILE HAS BEEN CONVERTED NCOPY RECORDS COPIED, NUPD RECORDS UPDATED, NSKIP
RECORDS SKIPPED
Explanation: An OPC VSAM file has been successfully built from the corresponding file in a different release of
OPC. This message documents the number of records copied without change, the number of modified records, and
the number of records in the input file that were not used.
System action: The migration program continues processing by reading the next CONVERT statement from the
input file.
Problem determination: If there is a problem using the output file, verify that the statistical information in this
message is correct.
System programmer response: None.
EQQIC01E THE INPUT DATA SET, DDNAME = SYSIN, COULD NOT BE OPENED
Explanation: The file migration program could not open its input dataset.
System action: The migration program is terminated.
System programmer response: Check that the SYSIN DD statement exists and is correctly coded.
Correct the errors and resubmit the file migration batch job.
EQQIC02E UNABLE TO CONVERT FILE FILE
Explanation: The file migration program could not execute the requested file conversion. This message is preceded
by one or more error messages that describe the problem.
System action: The migration program continues processing by reading the next CONVERT statement from the
input file.
Problem determination: Check the previous messages to determine the cause of the problem.
Verify that:

The
The
The
The
The
The

output datasets are empty VSAM datasets.
output datasets are correctly allocated.
job executing the migration program is authorized to update the output datasets.
input datasets do not contain errors.
input datasets are OPC VSAM datasets at the level specified.
migration program is authorized to read the input datasets.

System programmer response: Correct the errors and resubmit the file migration batch job.
EQQIC03E LOGICAL RECORD SIZE FOR THE INPUT DATA SET, DDNAME SYSIN, IS NOT VALID
Explanation: The file migration program could not use the input dataset, SYSIN, because its logical record length is
not 80 bytes.
System action: The migration program is terminated.
Problem determination: Check that the SYSIN DD statement exists and is correctly coded.
System programmer response: Correct the errors and resubmit the file migration batch job. If necessary, copy
SYSIN statements to a file that has record size 80 bytes.

 Copyright IBM Corp. 1991, 1999

161

EQQIC04E EQQIC08I

EQQIC04E EQQICTOP TERMINATED BECAUSE OF UNRECOVERABLE ERRORS
Explanation: A severe error occurred during the execution of the file migration program.
System action: The migration program is terminated.
Problem determination: Review the message log and the dump dataset.
System programmer response: If you cannot determine the cause of the error, contact your IBM representative.
EQQIC05E WRITE OF NEW RECORD FAILED, RECORD WITH SAME KEY IS ALREADY PRESENT
Explanation: A VSAM error occurred when writing a new record to the output dataset. Error codes indicate that the
output dataset contains a record with the same key as the new record.
System action: The migration program continues processing with the next CONVERT statement, if one is defined.
System programmer response: Make sure that the output dataset is empty when the migration starts.
EQQIC06W THE INPUT DATA SET DOES NOT CONTAIN ANY TYPE RECORDS
Explanation: An OPC VSAM file has been successfully built from the corresponding file in a different OPC release,
but the input dataset did not contain all of the record types that were expected.
System action: The migration program continues processing by reading the next CONVERT statement from the
SYSIN file. The return code for the current CONVERT statement is set to 4.
Problem determination: If there is a problem using the output file, verify that the input dataset was correctly
specified.
System programmer response: None.
EQQIC07E APPLICATION AD WITH INPUT ARRIVAL IA AND OPERNUM OP# THE FOLLOWING SPECIAL
RESOURCES CAUSE EXCEED OF THE OUTPUT RECORD SIZE:
Explanation: During conversion of the current plan operation record identified in the message text, the migrated
output record would be too large to store without modification. At least one special resource referenced by the
operation cannot be included. The subsequent message EQQIC08I identifies the special resources that cannot fit.
System action: The migration program is terminated. No valid current plan is created.
Problem determination: As each special resource entry is expanded by 8 bytes, while the maximum record size
remains the same, it is possible to encounter this problem.
System programmer response: Start up the previous release of OPC or OPC/A and delete any special resource
entries from the operation that are unnecessary. The entries you delete do not have to be those identified in
EQQIC08I.
EQQIC08I SR
Explanation: This message is associated with EQQIC07E. It lists those special resources that could not fit into the
output current plan record.
System action: The migration program is terminated.
System programmer response: See the description for message EQQIC07E.

162

Tivoli OPC Messages and Codes

EQQIC09E EQQIC14E

EQQIC09E APPLICATION INDEX RECORD FOR AD HAS AN INVALID INPUT ARRIVAL IA FOR AN
OCCURRENCE IN STATUS ST
Explanation: A current plan application index record CPLREC05, identified in the message text, contains an invalid
input arrival date in one of its occurrence data.
System action: The migration program continues processing by reading the next CONVERT statement from the
input file. No valid current plan is created.
System programmer response: Do one of the following:
Update the occurrence with a valid I/A date.
If the occurrence status is complete, run two or more CP EXTENDS to delete it from the current plan, before
rerunning the conversion.

EQQIC10E THE FILE KEYWORD IS MISSING
Explanation: The current CONVERT statement does not contain the FILE keyword.
System action: The migration program continues processing by reading the next CONVERT statement from the
input file.
System programmer response: Add the FILE keyword to the current CONVERT statement and resubmit the file
migration batch job.
EQQIC11E A PARAMETER IS REQUIRED FOR THE FILE KEYWORD
Explanation: The FILE keyword in the current CONVERT statement does not specify a value.
System action: The migration program continues processing by reading the next CONVERT statement from the
input file.
System programmer response: Add a file name value to the FILE keyword of the current CONVERT statement,
and resubmit the file migration batch job.
EQQIC12E THE FROMREL KEYWORD IS MISSING
Explanation: The current CONVERT statement does not contain the FROMREL keyword.
System action: The migration program continues processing by reading the next CONVERT statement from the
input file.
System programmer response: Add the FROMREL keyword to the current CONVERT statement and resubmit the
file migration batch job.
EQQIC13E A PARAMETER IS REQUIRED FOR THE FROMREL KEYWORD
Explanation: The FROMREL keyword in the current CONVERT statement does not specify a value.
System action: The migration program continues processing by reading the next CONVERT statement from the
input file.
System programmer response: Add a file name value to the FROMREL keyword of the current CONVERT
statement and resubmit the file migration batch job.
EQQIC14E THE TOREL KEYWORD IS MISSING
Explanation: The current CONVERT statement does not contain the TOREL keyword.
System action: The migration program continues processing by reading the next CONVERT statement from the
input file.
System programmer response: Add the TOREL keyword to the current CONVERT statement and resubmit the file
migration batch job.

Chapter 15. EQQICnn Messages

163

EQQIC15E EQQIC19E

EQQIC15E A PARAMETER IS REQUIRED FOR THE TOREL KEYWORD
Explanation: The TOREL keyword in the current CONVERT statement does not specify a value.
System action: The migration program continues processing by reading the next CONVERT statement from the
input file.
System programmer response: Add a file name value to the TOREL keyword of the current CONVERT statement
and resubmit the file migration batch job.
EQQIC16W INPUT APPLICATION APPL IS TOO LARGE TO BE WRITTEN TO THE OUTPUT FILE
Explanation: An application description (AD) in the input AD file defined to the migration program is too large to be
written to the output dataset. The most likely reason for this message is that the maximum record size is larger for
the input AD file than for the output AD file.
System action: The current input AD record is skipped. The migration program continues normal processing by
reading the next record on the input file. The return code for the current CONVERT command is 4 or higher.
System programmer response: Determine if the maximum record size defined for the output AD file is too small. If
it is, reallocate the output AD file and reexecute the migration program. If this is fallback to an earlier OPC release,
determine if the application is needed. If it is, use the Application Description dialog for the earlier OPC release to
define it.
EQQIC17E INPUT LTP OCCURRENCE APPL IA IS TOO LARGE TO BE WRITTEN TO THE OUTPUT FILE
Explanation: A long-term plan (LTP) occurrence in the input LTP file defined to the migration program is too large to
be written to the output dataset. The most likely reason for this message is that the maximum record size is larger for
the input LTP file than for the output LTP file.
System action: The current input LTP record cannot be converted to the format of the output file. The migration
program continues processing by reading the next record on the input file, but no more records are written to the
output file. The return code for the current CONVERT command is 8 or higher.
System programmer response: Determine if the maximum record size defined for the output LTP file is too small.
If it is, reallocate the output LTP file and reexecute the migration program.
If this is fallback to an earlier OPC release, use the Long-Term Plan dialog to delete the problem occurrence in the
input LTP file, and reexecute the migration program. Determine if the occurrence is needed. If it is, use the
Long-Term Plan dialog for the earlier OPC release to define it.
EQQIC18E FROMREL AND TOREL COMBINATION NOT SUPPORTED FOR FILE FILE
Explanation: The file FILE specified in the current CONVERT statement is not supported by the release defined for
the FROMREL or TOREL keyword.
System action: The migration program continues processing with the next CONVERT statement, if one is defined.
System programmer response: Refer to Tivoli OPC Installation Guide for information about the valid combinations.
Correct the value in the FILE, FROMREL, or TOREL keyword of the current CONVERT statement and resubmit the
job.

| EQQIC19E MIGRATION OF DATA SETS BETWEEN OPC V1R1 TO V1R3 MUST BE DONE IN TWO STEPS VIA
|
OPC V1R2
| Explanation: Migration from OPC Version 1.1 to OPC Version 1.3 or from OPC Version 1.3 back to Version 1.1 is
| not allowed.

164

Tivoli OPC Messages and Codes

EQQIC20W EQQIC25W

| EQQIC20W INPUT JCL VARIABLE TABLE RECORD JCL IS NOT VALID 1999-12-31 OR EARLIER AND CANNOT
|
BE CONVERTED
Explanation: The JCL variable table record has been updated after 1999-12-31, so it cannot be converted for
fallback to a release that does not support dates later than 1999-12-31.
System action: The current input record is skipped. The migration program continues normal processing by reading
the next record on the input file. The return code for the current CONVERT command is 4 or higher.
System programmer response: Update or delete the JCL variable table record and resubmit the migration program.

| EQQIC21W INPUT APPLICATION APPL IS NOT VALID 1999-12-31 OR EARLIER AND CANNOT BE CONVERTED
Explanation: An application description (AD) in the input AD file is not valid 1999-12-31 or earlier, or it contains a
run cycle that is not valid 1999-12-31 or earlier, or it has been updated after 1999-12-31, so it cannot be converted for
fallback to a release that does not support dates later than 1999-12-31.
System action: The current input record is skipped. The migration program continues normal processing by reading
next record on the input file. The return code for the current CONVERT command is 4 or higher.
System programmer response: Update the application description and resubmit the migration program.

| EQQIC22I INPUT APPLICATION APPL HAS A VALID TO DATE LATER THAN 1999-12-31. NEW VALID TO
|
DATE RESET TO 1999-12-31
Explanation: An application description (AD) in the input AD file has a valid-to date later than 1999-12-31 or a run
cycle with an out-of-effect date later than 1999-12-31 when converting for fallback to a release that does not support
dates after 1999-12-31.
System action: The current input record is converted. Valid-to date, or out-of-effect date, is set to 1999-12-31.
The migration program continues normal processing by reading the next record on the input file.
System programmer response: None.

| EQQIC23W INPUT PERIOD PER IS NOT VALID 1999-12-31 OR EARLIER AND CANNOT BE CONVERTED
Explanation: A period description in the input workstation (WS) file has an interval origin date or interval end date
later than 1999-12-31, or the description has been updated after 1999-12-31, so it cannot be converted for fallback to
a release that does not support dates later than 1999-12-31.
System action: The current input record is skipped. The migration program continues normal processing by reading
the next record on the input file. Return code for the current CONVERT command is 4 or higher.
System programmer response: Update or delete the period description record and resubmit the migration program.

| EQQIC24W INPUT WORKSTATION WS IS NOT VALID 1999-12-31 OR EARLIER AND CANNOT BE CONVERTED
Explanation: A workstation (WS) description in the input WS file has a specific date later than 1999-12-31 or the
description has been updated after 1999-12-31, so it cannot be converted for fallback to a release that does not
support dates later than 1999-12-31.
System action: The current input record is skipped. The migration program continues normal processing by reading
the next record on the input file. The return code for the current CONVERT command is 4 or higher.
System programmer response: Update or delete the workstation description and resubmit the migration program.

| EQQIC25W INPUT CALENDAR CAL IS NOT VALID 1999-12-31 OR EARLIER AND CANNOT BE CONVERTED
Explanation: A calendar description in the input workstation (WS) file has a specific date later than 1999-12-31 or it
has been updated after 1999-12-31, so it cannot be converted for fallback to a release that does not support dates
later than 1999-12-31.
System action: The current input record is skipped. The migration program continues normal processing by reading
the next record on the input file. The return code for the current CONVERT command is 4 or higher.
System programmer response: Update or delete the calendar description and resubmit the migration program.

Chapter 15. EQQICnn Messages

165

EQQIC26W EQQIC29E

| EQQIC26W INPUT ALL WORKSTATION CLOSED WAC IS NOT VALID 1999-12-31 OR EARLIER AND CANNOT
|
BE CONVERTED
Explanation: An all workstation (WS) closed record in the input WS file has a specific date later than 1999-12-31 or
the record has been updated after 1999-12-31, so it cannot be converted for fallback to a release that does not
support dates later than 1999-12-31.
System action: The current input record is skipped. The migration program continues normal processing by reading
the next record on the input file. The return code for the current CONVERT command is 4 or higher.
System programmer response: Update or delete the workstation closed record and resubmit the migration
program.

| EQQIC27W INPUT OPERATOR INSTRUCTION OI IS NOT VALID 1999-12-31 OR EARLIER AND CANNOT BE
|
CONVERTED
Explanation: An operator instruction (OI) record in the input OI file has a valid-from or valid-to date later than
1999-12-31 or the record has been updated after 1999-12-31, so it cannot be converted for fallback to a release that
does not support dates later than 1999-12-31.
System action: The current input record is skipped. The migration program continues normal processing by reading
the next record on the input file. The return code for the current CONVERT command is 4 or higher.
System programmer response: Update or delete the operator instruction and resubmit the migration program.
EQQIC28E INPUT LTP HEADER RECORD HAS A DATE LATER THAN 1999-12-31. LTP CANNOT BE
CONVERTED
Explanation: One or more of the following dates in a long-term plan (LTP) header is later than 1999-12-31, so the
LTP cannot be converted for fallback to a release that does not support dates later than 1999-12-31.

LTP start date
LTP end date
LTP latest update date
First noncompleted occurrence
Plan next period end date.

System action: The migration program continues processing by reading the next CONVERT statement from the
input file. The return code for the current CONVERT command is 8.
System programmer response: Create a new LTP after fallback.
EQQIC29E INPUT LTP OCCURRENCE APPL IA HAS A DATE LATER THAN 1999-12-31. LTP CANNOT BE
CONVERTED
Explanation: One or more of the following dates in a long-term plan (LTP) occurrence is later than 1999-12-31, so
the LTP cannot be converted for fallback to a release that does not support dates later than 1999-12-31.

Run date
Original run date
Deadline date
Predecessor run date
Successor run date
Operation input arrival date
Operation deadline date.

166

Tivoli OPC Messages and Codes

EQQIC30E EQQIC31E

EQQIC30E INPUT CURRENT PLAN HAS A DATE LATER THAN 1999-12-31. CURRENT PLAN CANNOT BE
CONVERTED
Explanation: One or more of the following dates in a current plan header record or common information is later than
1999-12-31, so the current plan cannot be converted for fallback to a release that does not support dates later than
1999-12-31.
In header record:
– Current plan creation date
– Last plan next period end
– Last backup date
– Tail end date
– Report period start date.
In workstation record:
– Interval start date
– Interval end date.
In application description (AD) index record:
– Input arrival date
– Actual completion or deadline date.
In remaining slack record:
– Earliest latest start date
In workstation activity record:
– Activity date
In catalog management record:
– Input arrival date
In job log retrieval record:
– Input arrival date.
System action: The migration program continues processing by reading the next CONVERT statement from the
input file. The return code for the current CONVERT command is 8.
System programmer response: Create a new current plan after fallback.
EQQIC31E INPUT CURRENT PLAN OCCURRENCE AD IA HAS A DATE LATER THAN 1999-12-31. CURRENT
PLAN CANNOT BE CONVERTED
Explanation: One or more of the following dates in a current plan occurrence or operation is later than 1999-12-31,
so the current plan cannot be converted for fallback to a release that does not support dates later than 1999-12-31.
In occurrence record:
– Input arrival date from long-term plan (LTP)
– Modified input arrival date or input arrival date from LTP
– Deadline date
– Actual arrival date
– Actual completion date.
In operation record:
– Application input arrival date after modify current plan (MCP) update
– Planned start date
– Planned end date
– Operation input arrival date
– Operation deadline date
– Latest out date for operation
– Actual start date
– Actual arrival date
– Intermediate start date
– Actual end date.
In undecided operation record:
– Input arrival date.
System action: The migration program continues processing by reading the next CONVERT statement from the
input file. The return code for the current CONVERT command is 8.
System programmer response: Create a new current plan after fallback.

Chapter 15. EQQICnn Messages

167

EQQIC32W EQQIC36E

| EQQIC32W JCL DATASET RECORD FOR APPLICATION APPL WITH INPUT ARRIVAL IA AND OPERATION
|
NUMBER OP# IS NOT VALID 1999-12-31 OR EARLIER AND CANNOT BE CONVERTED
Explanation: A record in the input file of the JCL dataset has an occurrence input arrival date later than 1999-12-31
or the record has been updated after 1999-12-31, so it cannot be converted for fallback to a release that does not
support dates later than 1999-12-31.
System action: The current input record is skipped. The migration program continues normal processing by reading
the next record on the input file. The return code for the current CONVERT command is 4 or higher.
System programmer response: None.

| EQQIC33W RESOURCE DATASET RECORD SR IS NOT VALID 1999-12-31 OR EARLIER AND CANNOT BE
|
CONVERTED
Explanation: A record in the input file of the special resource dataset has an interval date later than 1999-12-31 or
the record has been updated after 1999-12-31, so it cannot be converted for fallback to a release that does not
support dates later than 1999-12-31.
System action: The current input record is skipped. The migration program continues normal processing by reading
the next record on the input file. The return code for the current CONVERT command is 4 or higher.
System programmer response: Update or delete the special resource record and resubmit the migration program.

| EQQIC34W ETT RECORD SI IS NOT VALID 1999-12-31 OR EARLIER AND CANNOT BE CONVERTED
Explanation: An event-triggered tracking (ETT) record in the input SI file has been updated later than 1999-12-31,
so it cannot be converted for fallback to a release that does not support dates later than 1999-12-31.
System action: The current input record is skipped. The migration program continues normal processing by reading
the next record on the input file. The return code for the current CONVERT command is 4 or higher.
System programmer response: If the ETT record is correctly defined in the resource definition database, no action
is required. If not, use SRSTART or EVPGM to add the record to the CX file.

| EQQIC35W JOBLOG RECORD FOR APPLICATION APPL WITH INPUT ARRIVAL IA AND OPERATION NUMBER
|
OP# IS NOT VALID 1999-12-31 OR EARLIER AND CANNOT BE CONVERTED
Explanation: A joblog record in the input JCL file has an occurrence input arrival date later than 1999-12-31, so it
cannot be converted for fallback to a release that does not support dates later than 1999-12-31.
System action: The current input record is skipped. The migration program continues normal processing by reading
the next record on the input file. The return code for the current CONVERT command is 4 or higher.
System programmer response: None.
EQQIC36E CURRENT PLAN RECORD OF TYPE RECID FOR APPLICATION AD WITH INPUT ARRIVAL IA AND
OPERATION NUMBER OPNUM IS NOT VALID, TOO HIGH OPERATION NUMBER, CANNOT BE
CONVERTED
Explanation: The operation number in one of the records in the input file is higher than the range supported by the
Tivoli OPC release to which you are migrating. RECID is the current plan record type:
03
09
13
14

An operation record
A rerun record
A catalog management record
A joblog record.

System action: The migration fails without producing a migrated current plan file.
User response: Use the OPC dialog or the program interface to update the current plan file being migrated, making
sure that all the operation numbers are in the range supported by the release to which you are migrating.
System programmer response: None.

168

Tivoli OPC Messages and Codes

EQQIC37E EQQIC38W

EQQIC37E CURRENT PLAN RECORD OF TYPE RECID FOR APPLICATION AD WITH INPUT ARRIVAL IA IS
NOT VALID, TOO HIGH OCCURRENCE NUMBER, CANNOT BE CONVERTED
Explanation: The occurrence number in one of the records in the input file is higher than the range supported by the
Tivoli OPC release to which you are migrating. RECID is the current plan record type:
03
09
13
14

An operation record
A rerun record
A catalog management record
A joblog record.

System action: The migration fails without producing a migrated current plan file.
User response: Perform daily planning to reduce the number of occurrences in the current plan being migrated. Set
the BATCHOPT parameter PREVRES to NO at the replan. If the current plan still has too many occurrences, do
either of the following:
Run Tivoli OPC until enough occurrences have been completed.
Delete occurrences, using the OPC dialog or the program interface.
Repeat the plan.
System programmer response: None.
EQQIC38W RECTYP RECORD FOR OCCURRENCE AD AI, OPERATION OPNUM IS TOO LARGE TO BE
WRITTEN TO THE OUTPUT FILE
Explanation: A record in the input JS file defined to the migration program is too large to be written to the output file.
The most likely reason is that the maximum record size is larger for the input JS file than for the output JS file.
System action: The record that is too large is ignored. The migration program continues to process normally. The
return code for the current CONVERT run is 4 or higher.
System programmer response: Determine whether the maximum record size defined for the JS file is too small,
reallocate the file, and rerun the migration job.

Chapter 15. EQQICnn Messages

169

170

Tivoli OPC Messages and Codes

EQQJ001I EQQJ010I

Chapter 16. EQQJnnn Messages
EQQJ001I ETT ACTIVATION/DEACTIVATION REQUEST WAS NOT CONFIRMED
Explanation: You chose not to confirm the original request. So it was ignored by Tivoli OPC.
System action: None.
User response: None.
EQQJ002W ETT ACTIVATION REQUEST IGNORED SINCE ETT ALREADY ACTIVE
Explanation: The event-triggered tracking (ETT) function was already active when you requested activation of the
function.
System action: None.
User response: None.
EQQJ003W ETT DEACTIVATION REQUEST IGNORED SINCE ETT NOT ACTIVE
Explanation: The event-triggered tracking (ETT) function was not active when you requested deactivation of the
function.
System action: None.
User response: None.
EQQJ004I ETT FUNCTION HAS BEEN SUCCESSFULLY ACTIVATED
Explanation: The event-triggered tracking (ETT) activation request has been successfully processed.
System action: None.
User response: None.
EQQJ005I ETT FUNCTION HAS BEEN SUCCESSFULLY DEACTIVATED
Explanation: The event-triggered tracking (ETT) deactivation request has been successfully processed.
System action: None.
User response: None.
EQQJ006W ETT REQUEST IGNORED DUE TO LACK OF PROPER AUTHORIZATION
Explanation: You have attempted to use the event-triggered tracking (ETT) function, but you do not have the
necessary authorization.
System action: None.
User response: Contact your Tivoli OPC security administrator.
EQQJ010I YOUR CHANGES HAVE SUCCESSFULLY UPDATED THE ETT DATABASE
Explanation: Your modifications to the event-triggered tracking (ETT) table have successfully updated the ETT
database.
System action: None.
User response: None.

 Copyright IBM Corp. 1991, 1999

171

EQQJ011E EQQJ022E

EQQJ011E YOUR CHANGES DID NOT UPDATE THE ETT DATABASE DUE TO ERRORS
Explanation: Your modifications to the event-triggered tracking (ETT) table did not update the table dataset due to
some error in the Tivoli OPC subsystem.
System action: None.
User response: Exit from this panel and reenter it to determine which modifications updated the ETT database.
Reenter those modifications that did not take effect. If the error persist, contact your system programmer.
System programmer response: Review the Tivoli OPC message log for I/O errors pertaining to the table dataset.
Correct all errors and restart Tivoli OPC.
EQQJ012E YOUR CHANGES TO THE ETT CRITERIA CONTAIN SYNTAX ERROR(S)
Explanation: Your changes to the event-triggered tracking (ETT) criteria contain a syntax error (or errors).
System action: None.
User response: Enter the correct data.
EQQJ013E THE ETT CRITERIA IS BEING UPDATED BY SOMEONE ELSE - TRY LATER
Explanation: Another user is currently updating the event-triggered tracking (ETT) criteria table. Only one user can
access the table at a time.
System action: None.
User response: Try again later.

| EQQJ014E VALID MATCHING TYPES ARE OCHCEXA, OCHCPFX AND OCHCSFX
| Explanation: OCHCEXA, OCHCPFX and OCHCSFX are the national language characters for 'E' (exact), 'P' (prefix)
| and 'S' (suffix).
System action: None.
User response: Enter the correct matching type.
EQQJ020E AVAILABILITY STATUS CHANGE INFO MUST BE SPECIFIED FOR RESOURCE EVENTS
Explanation: You have defined a triggering event as a resource event, but failed to indicate if event-triggered
tracking (ETT) triggering should occur only for an availability status switch from N (no) to Y (yes) or if ETT triggering
should occur whenever the availability is set to Y.
System action: The system waits for you to respond.
User response: If you want the ETT triggered application to be added only when the resource is switched from
unavailable to available, specify Y in the availability switch field. If you want the application to be added every time
that the resource is set to available, regardless of the old status, specify N in the availability switch field.
EQQJ021E ETT EVENT TYPE MUST BE OCHCJOB OR OCHCRES
Explanation: OCHCJOB and OCHCRES are the national language characters for 'J' (job) and 'R' (resource).
System action: The system waits for you to respond.
User response: Enter the correct data.
EQQJ022E JOB NAME REPLACEMENT INFO MUST BE SPECIFIED FOR JOB EVENTS
Explanation: You have specified the event to be a job event, but failed to indicate whether the job name in the first
operation of the added application should be replaced or not.
System action: The system waits for you to respond.
User response: Enter the correct data.

172

Tivoli OPC Messages and Codes

EQQJ023E EQQJ029E

EQQJ023E JOB NAME REPLACEMENT INFO MUST BE OCHCYES OR OCHCNO
Explanation: OCHCYES and OCHCNO are the national characters for 'Y' (yes) and 'N' (no).
System action: The system waits for you to respond.
User response: Enter the correct data.
EQQJ024E JOB NAME REPLACEMENT INFO MUST BE OCHCNO OR BLANK FOR RESOURCE EVENT
Explanation: You have specified the event to be a resource event. You cannot replace job name information for
resource events. Tivoli OPC automatically sets this information to N (no) for resource events.

OCHCNO is the national character for 'N' (no).
System action: None.
User response: None.
EQQJ025E A VALID NAME OF AN ASSOCIATED APPLICATION MUST BE SPECIFIED
Explanation: You must specify the name of a valid application to be added to the current plan when an
event-triggered tracking (ETT) event matching this criteria entry occurs.
System action: The system waits for you to respond.
User response: Enter correct data.
EQQJ026E VALID VALUES ARE: OCHCYES, OCHCNO, OCHPRED, OCHSUCC AND BLANK
Explanation: You have entered a value for the dependency resolution attribute that is not recognized by the
Event-Triggered Tracking dialog. You must change the value to one of the supported values defined by this message.
System action: The system waits for you to respond.
User response: Change the dependency resolution value.
EQQJ027E AVAILABILITY STATUS CHANGE FIELD IS NOT OCHCNO OR BLANK
Explanation: You have defined a triggering event as a reader event, but have specified a character other than
OCHCNO or blank in the availablility switch field. The availability status switch is relevant only when the triggering
event is a resource.
System action: The system waits for you to respond.
User response: Change the availability switch indicator for the trigger to OCHCNO or leave the field blank.
EQQJ028E EACH ETT CRITERIA ROW MUST HAVE A UNIQUE EVENT NAME WITHIN TYPE
Explanation: You have specified duplicate event names in the event-triggered tracking (ETT) table.
System action: The system waits for you to respond.
User response: Remove the duplicate entry or make its name unique.
EQQJ029E AVAILABILITY STATUS CHANGE FIELD IS NOT OCHCYES OR OCHCNO
Explanation: You have defined a triggering event as a resource event, but have specified a character other than
OCHCYES or OCHCNO in the availablility switch field. The availability status switch must be set when the triggering
event is a resource.
System action: The system waits for you to respond.
User response: If you want the event-triggered tracking (ETT) application to be added only when the resource is
switched from unavailable to available, specify Y in the availability switch field. If you want the application to be added
every time the resource is set to available, regardless of the old status, specify N in the availability switch field.

Chapter 16. EQQJnnn Messages

173

EQQJ500E EQQJ505E

EQQJ500E INVALID STRING IN DIRECTIVE AT LINE LINE OF SCTN
Explanation: The predicate for any keyword other than COMP must:
Consist of alphanumeric characters
Begin with an alphabetic character.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Correct the tailoring directive.
EQQJ501E DUPLICATE TABLE NAME TBL AT LINE LINE OF SCTN
Explanation: The same table name was encountered twice in an OPC SEARCH directive.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Correct the tailoring directive.
EQQJ502E CONTRADICTORY USE OF STANDARD TABLES AT LINE LINE OF SCTN
Explanation: An OPC SEARCH directive contains either both GLOBAL and NOGLOBAL, or both APPL and
NOAPPL.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Correct the tailoring directive.
EQQJ503E ERROR ATTEMPTING TO READ JCL MEMBER MBR
Explanation: The member specified in an OPC FETCH directive could not be found. The member name is incorrect
or the member cannot be accessed.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Correct the tailoring directive or ensure that the member is available.
EQQJ504E KEYWORD STRING TOO LONG IN OPC DIRECTIVE BEGINNING AT LINE LINE OF SCTN
Explanation: The third and final string in an OPC directive contains more than 1024 characters after substitution,
including continuation lines.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Correct the tailoring directive.
EQQJ505E INVALID KEYWORD COMBINATION IN OPC DIRECTIVE BEGINNING AT LINE LINE OF SCTN
Explanation: An OPC directive has at one or more of these problems:
Keywords are incompatible with each other.
Keywords are incompatible with the type of directive.
Mandatory keywords are missing.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Correct the tailoring directive.

174

Tivoli OPC Messages and Codes

EQQJ506E EQQJ510E

EQQJ506E RECURSIVE SUBSTITUTION AT LINE LINE OF SCTN
Explanation: The value of a variable depends on the values of other variables, which in turn depend on its value.
No value can be determined for this variable.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Examine the table definitions of the variables in the line and eliminate the closed translation loop.
EQQJ507E CHANGE OF STRUCTURE CAUSED BY SUBSTITUTION IN DIRECTIVE BEGINNING AT LINE LINE
OF SCTN
Explanation: Variable substitution has caused one or more of these changes:

An OPC directive has been created.
The type of an OPC directive has changed.
The keywords of an OPC directive have changed.
An OPC directive has changed to another line type.

System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Correct the original tailoring directive or substitution values.
EQQJ508E RECURSIVE SUBSTITUTION OF LENGTH LINES FROM FROM OF SCTN
Explanation: A closed loop of dependency definitions or variable translations exists.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Examine the table definitions of the variables in this section, and eliminate the loop.
If this section contains promptable variables, the values supplied for these variables may have caused the error.
EQQJ509E TABLE TBL NOT FOUND
Explanation: A table declared in a SEARCH or TABLE directive does not exist.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Check the directives to make sure that the table names are correct. Use the Variable Definition
dialog to make sure that the tables exist.

EQQJ510E UNSET VARIABLE VAR AT LINE LINE OF SCTN
Explanation: A non-dependent variable with no value was encountered in the submit phase or in a JCLPREPA
simulation request.
In the submit phase, or at simulation, these types of variables can be encountered:
Variables that have already been provided with values
Variables that are dependent on other variables
Variables that do not require a setting (which are eliminated from the job stream).
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Either change the variable definition or give the variable a value.

Chapter 16. EQQJnnn Messages

175

EQQJ511E EQQJ516E

EQQJ511E JOB JOBNAME IN APPLICATION APPL CONTAINS AN OPC CONTROL STATEMENT THAT IS NOT
RECOGNIZED
Explanation: OPC was unable to submit the identified job because it contains an incorrectly coded //*%OPC
statement and JCL variable scanning is active for this job.
System action: The current operation status is set to ended-in-error with error code OJCV.
User response: Locate the JCL for this job and correct the //*%OPC statement. Use the OPC dialog to rerun the
operation.
EQQJ512E RECURSIVE DEPENDENCY VARIABLE VAR AT LINE LINE OF SCTN
Explanation: A closed loop of dependency definitions exists.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Examine the table definitions of this variable and the chain on which it is dependent, and eliminate
the closed dependency loop. The loop does not necessarily include the variable listed in the message.
EQQJ513E SETUP VARIABLE CHLD DEPENDENT ON SUBMIT VARIABLE PRNT AT LINE LINE OF SCTN
Explanation: A prompt variable cannot be dependent on a submit variable.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Correct the table definitions, SEARCH directives, or TABLE directives.
EQQJ514E RETURN CODE RC FROM USER EXIT USRX. THE EXIT WAS DEFINED FOR VARIABLE VAR IN
TABLE TAB FOR APPLICATION ADID, WITH OCCURRENCE INPUT ARRIVAL IAD, IAT. THE
OPERATION NUMBER IS OPNO
Explanation: Tivoli OPC received an unexpected return code from an exit.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Correct the user module, supply a valid return code, and restart Tivoli OPC.
EQQJ515E RECOVERABLE ABEND IN USER EXIT USRX THAT WAS DEFINED FOR VARIABLE VAR IN TABLE
TAB FOR APPLICATION ADID, INPUT ARRIVAL IS IAD, IAT, OPERATION NUMBER IS OPNO
Explanation: The user module caused an abend from which Tivoli OPC recovered.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Correct the user module and restart Tivoli OPC.
EQQJ516E UNRECOVERABLE ABEND IN USER EXIT USRX THAT WAS DEFINED FOR VARIABLE VAR IN
TABLE TAB, APPLICATION IS ADID, WITH OCCURRENCE INPUT ARRIVAL IAD, IAT, OPERATION
NUMBER IS OPNO
Explanation: The user module caused an abend from which Tivoli OPC could not recover.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Correct the user module and restart Tivoli OPC.

176

Tivoli OPC Messages and Codes

EQQJ517E EQQJ523E

EQQJ517E INVALID VALUE VAL SUPPLIED BY USER EXIT USRX FOR VARIABLE VAR IN TABLE TAB FOR
APPLICATION ADID, OCCURRENCE IA IS IAD, IAT, OPERATION NUMBER IS OPNO
Explanation: The value that you supplied for the variable violates the verification rules in the variable definition.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Correct the user module or verification criteria. To use the corrected user module, you must restart
Tivoli OPC.
EQQJ518E THE SUBSTITUTION EXIT USRX WAS REFERENCED BY VARIABLE VAR. THE EXIT WILL NOT BE
CALLED AS IT HAS BEEN MARKED NOT EXECUTABLE BY OPC. APPLICATION IS ADID, INPUT
ARRIVAL IS: IAD, IAT, AND OPERATION NUMBER IS OPNO
Explanation: Tivoli OPC has previously discovered an abend in this exit and marked it as not executable. This exit
is not called again.
System action: The current operation status is set to ended-in-error, with error code OJCV.
System programmer response: Correct the exit and restart Tivoli OPC to reuse the exit.
EQQJ519E OPC DID NOT GET STORAGE ENOUGH TO BUILD JCL RECORD APPLICATION IS: ADID,
OPERATION NO IS: OPNO, INPUT ARRIVAL DATE IS: IAD AND INPUT ARRIVAL TIME IS: IAT
Explanation: Tivoli OPC tried to allocate storage for a final build of the JCL record, but the request for storage failed.
System action: The operation status depends on the SUBFAILACTION keyword in the JTOPTS initialization
statement. The operation can:
Keep status R or extended status RE
Get status C (complete)
Get status E (ended-in-error) with error code OSUF.
System programmer response: Make sure that Tivoli OPC is running in a large enough region and restart Tivoli
OPC.
EQQJ520E VALUE LENGTH IS REQUIRED WHEN COMPARISON OPERATOR SPECIFIED
Explanation: Because you entered a comparison operator, you must enter a value length.
System action: The system waits for you to respond.
User response: Enter the correct value.
EQQJ521E COMPARISON OPERATOR REQUIRED WHEN LENGTH OPERATOR SPECIFIED
Explanation: Because you entered a value length, you must enter a comparison operator.
System action: The system waits for you to respond.
User response: Enter the correct value.
EQQJ522E THE DEFAULT VALUE IS INVALID FOR THE VERIFICATION TYPE
Explanation: The default value that you entered does not match the verification rules for the variable.
System action: The system waits for you to respond.
User response: Enter the correct value.
EQQJ523E A VALIDATION PATTERN IS REQUIRED FOR PICT VERIFICATION
Explanation: Because you asked for PICT verification, you must enter a validation pattern.
System action: The system waits for you to respond.
User response: Enter the correct value.

Chapter 16. EQQJnnn Messages

177

EQQJ524E EQQJ530E

EQQJ524E Y/N MUST BE ENTERED IN NUMERIC FIELD FOR LIST/RANGE
Explanation: Because you asked for RANGE verification, you must enter Y (yes) or N (no) in the numeric field.
System action: The system waits for you to respond.
User response: Enter the correct value.
EQQJ525E THE JCL VARIABLE TABLE HAS BEEN DELETED
Explanation: The current variable table has been deleted from Tivoli OPC's database.
System action: The table is deleted.
User response: None.
EQQJ526E CHARACTER CHR IN POSITION PDS IS INVALID
Explanation: The value entered as a default value does not match the validation pattern defined for the variable.
System action: The system waits for you to respond.
User response: Enter the correct value.
EQQJ527E THE VALUES/RANGES MAY NOT CONTAIN IMBEDDED BLANKS
Explanation: You cannot use blanks in a LIST/RANGE verification value list.
System action: The system waits for you to respond.
User response: Enter the correct value.
EQQJ528E THE NUMBER OF VALUES MUST BE EVEN FOR RANGE VERIFICATION
Explanation: You specified an odd number of values for a range verification.
System action: The system waits for you to respond.
User response: Enter the correct value.
EQQJ529E THE VALUES DEFINING A RANGE ARE IN DESCENDING SEQUENCE
Explanation: You entered a range that consists of a larger number followed by a smaller number. You must specify
the smaller number (beginning of the range) before the larger number (end of the range).
System action: The system waits for you to respond.
User response: Enter the correct value.
EQQJ530E SCANNING LENGTH EXCEEDED LINE LINE OF SCTN
Explanation: Substitution of a JCL command has caused the command length to exceed 71 characters or
substitution of an in-stream data line has caused the in-stream data line to exceed 80 characters.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
System programmer response: If the substitution is correct, split the command line over two or more lines. If the
problem occurs in an in-stream data line, verify that the ISPF profile option for sequence numbering is turned off in the
JCL job library.

178

Tivoli OPC Messages and Codes

EQQJ531E EQQJ535E

EQQJ531E OPC WAS UNABLE TO LOAD VARIABLE SUBSTITUTION EXIT USRX TABLE NAME IS TAB,
VARIABLE NAME IS VAR, APPLICATION IS ADID, OCCURRENCE IA = IAD, IAT, OPERATION
NUMBER IS OPNO
Explanation: A variable substitution exit that was referred to could not be loaded by Tivoli OPC.
System action: The current operation status is set to ended-in-error with error code OJCV.
System programmer response: Check the current load library in the started task JCL and make sure that the exit is
link-edited to the correct library.
EQQJ532E INVALID OPC EXPRESSION EXPR BEGINNING AT LINE LINE OF SCTN
Explanation: The expression must consist of keyword= where keyword is one of: NAME, ACTION, PHASE,
MEMBER, COMP, EXIT.
This message can also be issued if all mandatory keywords have not been specified.
System action: If the error occurs during job submit, the current operation status is set to ended-in-error with error
code OJCV. Otherwise, the status is not changed.
User response: Correct the JCL.
EQQJ533E OPC DIRECTIVE DIR OUT OF POSITION LINE LINE OF SCTN
Explanation: There are two possibilities:
No previous //*%OPC BEGIN directive corresponds to the current //*%OPC END directive.
A //*%OPC BEGIN directive was found previously, but the current directive is not the corresponding //*%OPC END
directive.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Correct the JCL.
EQQJ534E INVALID VARIABLE VAR LINE LINE OF SCTN
Explanation: The name of a variable can contain one to eight alphanumeric characters, where the first character is
alphabetic. This message can also be reported if a tabular variable, that is, a ?-variable, does not include the
substitution column position and a default position is not defined in the JCL variable table.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Correct the JCL or the JCL variable table as appropriate.
EQQJ535E UNDEFINED VARIABLE VAR LINE LINE OF SCTN
Explanation: A variable that is not predefined by Tivoli OPC must appear in a table that is created by the JCL
variable dialog and is included in the current table concatenation.
For more information, refer to the description of the SEARCH and TABLE directives in Tivoli OPC Planning and
Scheduling the Workload.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Correct the JCL.

Chapter 16. EQQJnnn Messages

179

EQQJ536E EQQJ541E

EQQJ536E POSITIONAL OVERLAP VARIABLE VAR LINE LINE OF SCTN
Explanation: The tabular variable (?-variable) cannot be assigned the positions specified in the prefix or by default
because part or all of the receiving string is already occupied.
For more information, refer to Tivoli OPC Planning and Scheduling the Workload.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Correct the JCL.
EQQJ537E CALENDAR CAL CANNOT BE FOUND. SUBSTITUTION FAILED
Explanation: During variable substitution of a job, a function that requires access to a calendar, for example, a
SETVAR directive asking for an expression involving arithmetics on calendar days, could not be processed. The
calendar referenced by the occurrence no longer exists.
System action: If the error occurs during job submit, the current operation status is set to ended-in-error with error
code OJCV. Otherwise, the status is not changed.
User response: The calendar may have been deleted by mistake. Delete the SETVAR directive from the JCL, find
out what the calendar once looked like and insert the needed date manually under JCL Edit.
EQQJ538E BEGIN ACTION NOT CLOSED LINE LINE OF SCTN
Explanation: At the end of the JCL stream, the last //*%OPC BEGIN command has not been closed by a //*%OPC
END command.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Correct the JCL.
EQQJ539E VARIABLE SUBSTITUTION WAS INTERRUPTED BY SUBSTITUTION EXIT USRX. APPLICATION IS
ADID, INPUT ARRIVAL DATE AND TIME IS IAD, IAT OPERATION NUMBER IS OPNO
Explanation: A substitution exit set a return code of 8, which interrupted the JCL variable substitution. No further
substitution is done for this operation.
System action: The current operation status is set to ended-in-error with error code OJCV.
System programmer response: Check the current exits and determine the reason for return code 8 being passed
back. If the exit is changed and you want to reuse it, restart Tivoli OPC.
EQQJ540E MORE THAN 16 TABLES DECLARED IN SEARCH DIRECTIVE AT LINE LINE OF SCTN
Explanation: The number of tables requested by a SEARCH directive is greater than 16.
Unless GLOBAL and APPL are explicitly excluded (NOGLOBAL and NOAPPL), they contribute to the total even if they
are not specified in the SEARCH directive.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Check if all tables are necessary and correct the JCL.
EQQJ541E ATTEMPT TO CONCATENATE MORE THAN 16 TABLES BY TABLE DIRECTIVE AT LINE LINE OF
SCTN
Explanation: A TABLE directive has been encountered when 16 tables are already active.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Check if all tables are necessary and correct the JCL.

180

Tivoli OPC Messages and Codes

EQQJ542E EQQJ547E

EQQJ542E COMP EXPRESSION BEGINNING AT LINE LINE OF SCTN EXCEEDS 1024 BYTES
Explanation: The total length of all fields of a COMP expression, including COMP= and all continuations of the right
side of the expression on subsequent JCL lines, cannot exceed 1024 characters after substitution.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Correct the JCL.
EQQJ543E COMP EXPRESSION BEGINNING AT LINE LINE OF SCTN IS NOT WELL FORMED: EXPR
Explanation: The syntax of the COMP keyword is not correct.
System action: The current operation status is set to ended-in-error with error code OJCV.
Problem determination: This message is followed by message EQQJ544E, EQQJ545E, EQQJ546E, EQQJ572E,
EQQJ573E, or EQQJ547E, which describes the exact cause of the syntax error.
User response: Correct the OPC directive using the current COMP keyword.
EQQJ544E COMP EXPRESSION CONTAINS UNBALANCED PARENTHESIS
Explanation: Parentheses are not used correctly in the COMP keyword.
System action: The current operation status is set to ended-in-error with error code OJCV.
Problem determination: This message is issued together with message EQQJ543E. For an explanation of the
COMP keyword, refer to Tivoli OPC Planning and Scheduling the Workload.
User response: Correct the JCL for the operation and make sure that the COMP keyword contains the correct
number of parentheses.
EQQJ545E COMP EXPRESSION MUST CONTAIN AT LEAST ONE OPERATOR
Explanation: The COMP keyword does not contain any operators.
System action: The current operation status is set to ended-in-error with error code OJCV.
Problem determination: This message is issued together with message EQQJ543E. For an explanation of the
COMP keyword, refer to Tivoli OPC Planning and Scheduling the Workload.
User response: Correct the JCL for the operation and make sure that the COMP keyword contains at least one
operator.
EQQJ546E COMP EXPRESSION CONTAINS TOO FEW EQUATION SEPARATING COMMAS
Explanation: At least one comma is missing in the COMP keyword.
System action: The current operation status is set to ended-in-error with error code OJCV.
Problem determination: This message is issued together with message EQQJ543E. For an explanation of the
COMP keyword, refer to Tivoli OPC Planning and Scheduling the Workload.
User response: Correct the JCL for the operation and make sure that the COMP keyword is correct.
EQQJ547E COMP EXPRESSION CONTAINS TOO FEW OPERATORS
Explanation: At least one operator is missing in the COMP keyword.
System action: The current operation status is set to ended-in-error with error code OJCV.
Problem determination: This message is issued together with message EQQJ543E. For an explanation of the
COMP keyword, refer to Tivoli OPC Planning and Scheduling the Workload.
User response: Correct the JCL for the operation and make sure that the COMP keyword is correct.

Chapter 16. EQQJnnn Messages

181

EQQJ548W EQQJ560E

EQQJ548W VARIABLE VAR IN TABLE TABLE COULD NOT BE UPDATED. REASON IS RSN
Explanation: A SAVEVAR directive with ERRORACT=CONT was found during variable substitution. Tivoli OPC
tried to update the default value as requested in the SETVAR directive, but it was not possible for one of the following
reasons:
HELDLOCK
NOTFOUND
BADVNAME

Could not get ENQ lock necessary to access the variable.
Variable/table did not exist in the table dataset
Variable/table is either a Tivoli OPC-supplied variable or a temporary variable. These variables are
never saved.

System action: Processing continues. The job is submitted as normal, but the next time that the default value is
requested as input to variable substitution, it does not show the latest updated value.
User response: The value can be corrected by allowing a person with update access to the variable table to update
the default value manually in the JCL variable dialog.
EQQJ549E A SETUP PHASE DIRECTIVE AT LINE LINE OF SCTN REFERS TO A VARIABLE DEFINED FOR USE
AT SUBMIT
Explanation: The current job contains a JCL processing directive specifying PHASE=SETUP. Tivoli OPC could not
determine what action is requested by the statement because it refers to a JCL variable whose value is not
determined until the submit phase.
System action: The system waits for you to respond.
User response: Enter the JCL Edit dialog and correct the incorrect statement. Reenter the Ready List dialog and
retry JCL setup for this operation.
EQQJ550E CHARACTER CHR IN POSITION POS IS INVALID
Explanation: The value entered as a default value does not match the validation pattern defined for the variable.
System action: The system waits for you to respond.
User response: Enter the correct value.
EQQJ551E THE VALUE OF THE INDEPENDENT VARIABLE ALREADY EXISTS
Explanation: The same value of the independent variable is given in two different rows of the dependency table.
System action: The system waits for you to respond.
User response: Correct or delete the values that you entered.

| EQQJ553E VALIDATION ERROR AT LINE LINE in JOB SCTN VALUE IS REQUIRED FOR THE VARIABLE VAR
|
BUT IS DEFINED AS BLANK
| Explanation: JCL tailoring is setting a temporary variable by a replacement with a source string. This string is blank,
| but a value is required.
| System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
| OJCLV. Otherwise, the status is not changed.
| User response: Check the SETVAR directive from JCL to find the cause of the error and use JCL Edit for manual
| insertion of the missing value.
EQQJ560E MORE THAN 16 VARIABLES SPECIFIED IN SAVEVAR DIRECTIVE AT LINE LINE OF SCTN
Explanation: The number of variables requested to be saved in a SAVEVAR directive is greater than 16.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Split the SAVEVAR directive into multiple directives.

182

Tivoli OPC Messages and Codes

EQQJ561E EQQJ565E

EQQJ561E TEMPORARY VARIABLE NAME VAR ALREADY USED FOR SUBSTITUTION IN JOB JOBNAME
Explanation: A SETVAR directive requests creation of a temporary variable. There has been an earlier reference in
the job to the same name and it has been found in the Tivoli OPC Variable Table.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Use another name for your temporary variable.
EQQJ562E OPC WAS UNABLE TO ALLOCATE STORAGE TO PROCESS MEMBER MEMBER OF DDNAME
Explanation: Tivoli OPC was attempting to build a record in the VSAM dataset to be inserted in the JCL repository
dataset, but it was unable to do so because of insufficient virtual storage.
System action: The operation remains in Ready status. Tivoli OPC is unable to submit the job to JES.
User response: Submit the job manually.
System programmer response: Stop Tivoli OPC and restart it in a larger region.
EQQJ563E OPC WAS UNABLE TO FIND MEMBER MEMBER IN DDNAME LIBRARY FILE
Explanation: Tivoli OPC was attempting to submit a job to JES for a ready operation on a computer workstation.
However, no JCL for this operation is saved in the JCL repository dataset and the job is not present as a member in
the library defined by the EQQJBLIB DD statement.
System action: The operation remains in Ready status. Tivoli OPC assumes that some other function submits the
job to JES.
Problem determination: Check that the EQQJBLIB DD statement is correctly defined and that all required members
are defined.
User response: If necessary, submit the job manually.
EQQJ564W MEMBER MEMBER IN DDNAME LIBRARY FILE IS EMPTY
Explanation: The JCL library member exists in the library defined by the EQQJBLIB DD statement, but there are no
records in the member.
System action: The operation remains in Ready status. Tivoli OPC assumes that some other function submits the
job to JES.
Problem determination: Check that the EQQJBLIB DD statement is correctly defined and that all required members
are defined.
User response: If necessary, submit the job manually.
EQQJ565E INVALID VARIABLE OR TABLE NAME AT LINE LINE OF SCTN
Explanation: During variable substitution of a job, a SAVEVAR directive specified the name of a variable, or a
variable table, with incorrect syntax.
System action: If the error occurs during job submit, the current operation status is set to ended-in-error with error
code OJCV. Otherwise, the status is not changed.
User response: Correct the syntax of the variable or variable table.

Chapter 16. EQQJnnn Messages

183

EQQJ566E EQQJ570E

EQQJ566E INVALID REFERENCE TO GLOBAL TABLE AT LINE LINE OF SCTN
Explanation: During variable substitution of a job, a SAVEVAR directive was found that specified only the variable
name. The implied table is then the Variable Substitution global table. However, no GTABLE keyword has been
specified in OPCOPTS.
System action: If the error occurs during job submit, the current operation status is set to ended-in-error with error
code OJCV. Otherwise, the status is not changed.
User response: Either add a GTABLE keyword to OPCOPTS and restart the controller or specify the variable table
in the SAVEVAR statement.
EQQJ567E THE JCL FOR APPLICATION AD COULD NOT BE INSERTED IN THE JS REPOSITORY PHYSICAL
RECORD SIZE IS TOO SMALL
Explanation: The physical record length specified for the JS repository is too small.
System action: The current operation remains in Ready status.
Problem determination: Check the VSAM definitions for EQQJS1DS and EQQJS2DS.
User response: Contact your system programmer.
System programmer response: Increase the physical record length for EQQJS1DS and EQQJS2DS.
EQQJ568E VARIABLE VAR IN TABLE TABLE COULD NOT BE UPDATED. REASON: RSN
Explanation: A SAVEVAR directive with ERRORACT=NOCONT was found during variable substitution. Tivoli OPC
tried to update the default value as requested in the SETVAR directive, but it was not possible for one of the following
reasons:
HELDLOCK
NOTFOUND
BADVNAME

Could not get ENQ lock necessary to access the variable.
Variable/table did not exist in the variable table dataset
Variable/table is either a Tivoli OPC-supplied variable or a temporary variable. These variables are
never saved.

User response: The value can be corrected by allowing a person with update access to the variable table to correct
the default value manually in the JCL variable table dialog.
EQQJ569E INVALID REFERENCE TO DYNAMIC FORMAT VARIABLE AT LINE LINE OF SCTN
Explanation: A reference to a dynamic-format variable has been found and the format of the variable has not been
set in a SETFORM directive.
System action: If the error occurs during job submit, the current operation status is set to ended-in-error with error
code OJCV. Otherwise, the status is not changed.
User response: Insert a SETFORM directive in the JCL earlier than the point where it is referenced.
EQQJ570E INVALID DYNAMIC FORMAT VARIABLE NAME AT LINE LINE OF SCTN
Explanation: During variable substitution of a job, a SETFORM directive was found where the name of the
dynamic-format variable is not a Tivoli OPC-supplied dynamic format variable.
System action: If the error occurs during job submit, the current operation status is set to ended-in-error with error
code OJCV. Otherwise, the status is not changed.
User response: Correct the variable name in the SETFORM directive.

184

Tivoli OPC Messages and Codes

EQQJ571E EQQJ576E

EQQJ571E INVALID FORMAT EXPRESSION IN SETFORM DIRECTIVE AT LINE LINE OF SCTN
Explanation: During variable substitution of a job, a SETFORM directive was found where the format did not have
the proper syntax. Possible errors are:
The first characters after the left parenthesis and the last characters before the right parenthesis of the expression
are not meaningful keywords for the specified dynamic format variable. (For example, CCYY, YY, MM, DD, or
DDD for a date-related dynamic variable.)
The whole format expression was searched and no meaningful keywords for the specified dynamic-format variable
were found. (For example, CCYY, YY, MM, DD, or DDD was not found for a date-related dynamic variable.)
Tivoli OPC variable substitution characters (&, %, = or ?) are found in the expression.
System action: If the error occurs during job submit, the current operation status is set to ended-in-error with error
code OJCV. Otherwise, the status is not changed.
User response: Correct the format expression in the SETFORM directive.
EQQJ572E COMP EXPRESSION CONTAINS MULTIPLE VALUES FOR 'EXPRESSION2'
Explanation: A COMP expression with operators GT, GE, LT, or LE only allows one value for expression2.
System action: If the error occurs during job submit, the current operation status is set to ended-in-error with error
code OJCV. Otherwise, the status is not changed.
User response: Correct the JCL for the operation and make sure that the COMP keyword is correct.
EQQJ573E COMP EXPRESSION CONTAINS GENERIC SEARCH CHARACTERS
Explanation: A COMP expression with operators GT, GE, LT, or LE does not allow the generic characters * or % in
expression2.
System action: If the error occurs during job submit, the current operation status is set to ended-in-error with error
code OJCV. Otherwise, the status is not changed.
User response: Correct the JCL for the operation and make sure that the COMP keyword is correct.
EQQJ575E ARITHMETIC EXPRESSION BEGINNING AT LINE LINE OF SCTN EXCEEDS LIMITS
Explanation: During variable substitution of a job, the calculation of a SETVAR arithmetic expression resulted in a
date value that exceeds Tivoli OPC limits. Tivoli OPC supports dates from 1 January 1974 to 31 December 2071. If
the expression includes WD, the calculated date must fall within the range of three years earlier and six years later
than the current year.
System action: If the error occurs during job submit, the current operation status is set to ended-in-error with error
code OJCV. Otherwise, the status is not changed.
User response: Correct the SETVAR arithmetic expression.
EQQJ576E THE EQQUX002 EXIT COULD NOT OPEN AN INPUT DATA SET TO READ JOB MEMBER EXIT
MESSAGE IS: UX002MSG
Explanation: The joblib I/O exit was called and gave a return code indicating that it could not open one of its input
datasets.
System action: The job is not submitted by Tivoli OPC as intended. The operation remains in Ready status.
Problem determination: Check that all DD statements needed by the EQQUX002 exit have been correctly defined
and that the Tivoli OPC started task has (as a minimum) read access to all referenced datasets.
User response: If necessary, submit the job manually.
System programmer response: Correct all errors and restart Tivoli OPC.

Chapter 16. EQQJnnn Messages

185

EQQJ577E EQQJ581E

EQQJ577E OPC COULD NOT ALLOCATE STORAGE TO PROCESS JOB MEMBER FOR EQQUX002 EXIT
Explanation: Tivoli OPC was building a reord in the VSAM dataset to be inserted in the JCL repository dataset, but
it was unable to do so because of insufficient virtual storage.
System action: The operation remains in Ready status. Tivoli OPC is unable to submit the job to JES.
User response: Submit the job manually.
System programmer response: Stop Tivoli OPC and restart it in a larger region.
EQQJ578E THE EQQUX002 EXIT COULD NOT FIND JOB MEMBER IN ANY INPUT DATA SET
Explanation: Tivoli OPC was attempting to submit a job to JES for a ready operation on a computer workstation.
However, no JCL for this operation is saved in the JCL repository dataset, and the joblib I/O exit could not find the job
in any input dataset.
System action: The operation remains in Ready status. Tivoli OPC assumes that some other function submits the
job to JES.
Problem determination: Check that all DD statements needed by the EQQUX002 exit have been correctly defined
and that all required members are defined.
User response: If necessary, submit the job manually.
System programmer response: Correct all errors and restart Tivoli OPC.
EQQJ579W THE EQQUX002 EXIT DID NOT RETURN ANY DATA FOR JOB MEMBER
Explanation: The joblib I/O exit was called to retrieve a job to be submitted, but the exit did not return any data.
System action: The job is not submitted by Tivoli OPC as intended. The operation remains in Ready status.
Problem determination: Check that the joblib I/O exit has been correctly installed and that it works correctly.
User response: If necessary, submit the job manually.
System programmer response: Correct all errors and restart Tivoli OPC.
EQQJ580E THE EQQUX002 EXIT RETURNED THE FOLLOWING I/O ERROR MESSAGE FOR JOB MEMBER:
UX002MSG
Explanation: The joblib I/O exit was called to retrieve a job to be submitted, but the exit gave a return code
indicating that an I/O error had occurred on an input dataset.
System action: The job is not submitted by Tivoli OPC as intended. The operation remains in Ready status.
Problem determination: Check that the joblib I/O exit can access all required input datasets and that it works
correctly.
User response: If necessary, submit the job manually.
System programmer response: Correct all errors and restart Tivoli OPC.
EQQJ581E INVALID TEMPORARY VARIABLE NAME AT LINE LINE OF SCTN
Explanation: During variable substitution of a job, a SETVAR directive was found where the name of the temporary
variable is incorrect. The possible errors are:
The variable name does not start with a T.
The rest of the variable name contains one or more characters that are not alphanumeric.
System action: If the error occurs during job submit, the current operation status is set to ended-in-error with error
code OJCV. Otherwise, the status is not changed.
User response: Correct the name of the temporary variable.

186

Tivoli OPC Messages and Codes

EQQJ582E EQQJ585E

EQQJ582E JOB MEMBER RETURNED BY THE EQQUX002 EXIT EXCEEDS MAXIMUM SUPPORTED SIZE
Explanation: The joblib I/O exit was called to retrieve a job to be submitted, but the returned job exceeds the
maximum supported size, which is 256KB (kilobytes) of data.
System action: The job is not submitted by Tivoli OPC as intended. The operation remains in Ready status.
Problem determination: Check that the joblib I/O exit has been correctly installed and that it works correctly.
User response: If necessary, submit the job manually.
System programmer response: Correct all errors and restart Tivoli OPC.
EQQJ583E JOB MEMBER IN APPLICATION APPL IS TOO LARGE TO BE SAVED ON THE JS DATA SET
Explanation: A job that is about to be submitted to JES is too large to be saved in the JCL repository dataset.
System action: The job is submitted, but the JCL repository dataset is not updated.
Problem determination: Use the IDCAMS LISTCAT function to determine the maximum size of records in the
dataset defined by the EQQJSDS DD statement.
System programmer response: If necessary, allocate a new JCL repository dataset with a larger maximum record
size. Use the IDCAMS REPRO function to copy the old dataset into the new dataset. Restart Tivoli OPC.
EQQJ584E JOB MEMBER IN APPLICATION APPL COULD NOT BE SUBMITTED BECAUSE THE EQQUX001
EXIT RETURNED A SUBMITTING USER ID, USER, WHOSE AUTHORITY COULD NOT BE
DETERMINED
Explanation: The job submit exit was called and returned the name of a TSO user on whose behalf the job submit
should be done. An authority error occurred when trying to build a job submit environment for this user.
System action: The current job is not submitted. Tivoli OPC processes the next read operation.
Problem determination: Check that the job submit exit, EQQUX001, returns only valid TSO user names to the
caller.
User response: If necessary, submit the job manually.
System programmer response: Correct all errors and, if necessary, restart Tivoli OPC.
EQQJ585E INVALID ARITHMETIC EXPRESSION AT LINE LINE OF SCTN
Explanation: During JCL variable substitution, invalid syntax was found in the arithmetic expression of a SETVAR
directive.
The possible causes for the error are:

One or more parentheses missing in the arithmetical expression.
A valid sign (+ or -) is missing.
Both plus and minus signs are present in the expression, but only one sign is allowed.
Invalid variable name.
Invalid number in the expression. The number must be in the range 1 to 999.
An invalid type in the expression.
Erroneous nonblank characters within parentheses. Any nonblank within parentheses must be part of the
arithmetic expression.

System action: If the error occurs during job submit, the current operation status is set to ended-in-error with error
code OJCV. Otherwise, the status is not changed.
User response: Correct the arithmetic expression.

Chapter 16. EQQJnnn Messages

187

EQQJ586W EQQJ596E

EQQJ586W TEMPORARY VARIABLE VAR IN SETVAR DIRECTIVE NOT REFERRED IN JCL. JOBNAME:
JOBNAME
Explanation: During variable substitution of a job, a SETVAR directive was found and created a temporary variable.
The temporary variable was not referred to anywhere in the JCL.
System action: This is a warning. Operation status is not changed.
User response: Either delete the SETVAR directive or make sure that you have a corresponding reference to the
temporary variable in your JCL.
EQQJ587W VARIABLE VAR IN SAVEVAR DIRECTIVE NOT REFERRED IN JCL JOBNAME IS: JNM
Explanation: During variable substitution of a job, a SAVEVAR directive was found requesting update of the default
value of a variable. This variable was not referred to anywhere in the JCL.
System action: This is a warning. Processing continues.
User response: Either delete the variable name from the SAVEVAR directive or make sure that you have a
corresponding reference to the variable in the JCL.
EQQJ588E JOB MEMBER IN APPLICATION APPL IS TOO LARGE TO BE SUBMITTED BY OPC
Explanation: This job exceeds 65 535 records, which is the limit that Tivoli OPC can process.
System action: The job is not submitted. The operation remains in Arriving or Ready status, with extended status
Error during job submission.
User response: Submit the job outside of Tivoli OPC.
EQQJ590E VARIABLE TABLE NAME CONTAINS AN INVALID CHARACTER
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQJ591E THE VARIABLE NAME CONTAINS AN INVALID CHARACTER
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQJ592E INVALID VALUE. MUST BE Y OR N
Explanation: Data entry error; see “Data Entry Errors” on page 2.
You can enter only Y (for Yes) or N (for No) in this field.
EQQJ594E THE DEFAULT POSITION MUST BE IN THE RANGE 1-80
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The position that you have entered is out of the 80-column range for instream data or a JCL line.
EQQJ595E VALUE LENGTH IS REQUIRED WHEN COMP.OP IS SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Because you entered a comparison operator, you must enter a value length.
EQQJ596E COMPARISON OPERATOR REQUIRED WHEN LENGTH IS SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Because you entered a value length, you must enter a comparison operator.

188

Tivoli OPC Messages and Codes

EQQJ597E EQQJ610E

EQQJ597E THE DEFAULT VALUE IS INVALIDATED BY THE VERIFICATION CRITERIA
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The default value that you entered does not comply with the verification rules for the variable.
EQQJ598E VALIDATION PATTERN IS REQUIRED FOR PICT VERIFICATION
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Because you asked for PICT verification, you must enter a validation pattern.
EQQJ599E NUMERIC MUST BE SPECIFIED FOR RANGE/LIST VERIFICATION
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Because you asked for RANGE or LIST verification, you must set the Numeric field to Yes.
EQQJ604I A DEPENDENCY HAS BEEN MODIFIED
Explanation: The dependency that you modified has been inserted into the database.
System action: None.
User response: None.
EQQJ606I A DEPENDENCY HAS BEEN CREATED
Explanation: The dependency that you created has been inserted into the database.
System action: None.
User response: None.
EQQJ607I A DEPENDENCY HAS BEEN DELETED
Explanation: The dependency that you deleted has been removed from the database.
System action: None.
User response: None.
EQQJ609E YOU ARE NOT AUTHORIZED TO DELETE THIS JCL VARIABLE TABLE
Explanation: You have tried to delete a JCL variable table that you are not authorized to delete.
System action: None.
User response: Contact your system programmer
System programmer response: If the user should have this authorization, update the RACF profiles.
EQQJ610E THE JCL IMBED EXIT USRX RETURNED RETCODE = RC WHILE PROCESSING JOB MEMBER IN
APPLICATION APPL. THIS RETURN CODE IS NOT SUPPORTED, RETCODE = 4 IS ASSUMED
Explanation: A JCL imbed exit that was referenced in a FETCH directive of the current JCL returned an invalid
return code.
System action: The current operation status is set to ended-in-error with error code OJCV.
Problem determination: Check the exit and correct possible errors. It you change the exit and want to reuse it,
restart Tivoli OPC.

Chapter 16. EQQJnnn Messages

189

EQQJ611E EQQJ616E

EQQJ611E OPC COULD NOT ALLOCATE ENOUGH STORAGE TO PROCESS JOB MEMBER IN APPLICATION
APPL FOR THE JCL IMBED EXIT USRX
Explanation: Tivoli OPC was trying to build a JCL record from the data supplied by the exit defined in a FETCH
directive, but it could not do so because of insufficient virtual storage.
System action: The current operation status is set to ended-in-error with error code OJCV.
System programmer response: Stop Tivoli OPC and restart it in a larger region.
EQQJ612E THE JCL IMBED EXIT USRX COULD NOT FIND JOB MEMBER IN ANY INPUT DATA SET
Explanation: The exit gave a return code indicating that the JCL could not be found in the exit's input datasets.
System action: The current operation status is set to ended-in-error with error code OJCV.
Problem determination: Check that all DD statements needed by the exit have been correctly defined.
System programmer response: Correct all errors and restart Tivoli OPC.
EQQJ613E THE JCL IMBED EXIT USRX DID NOT RETURN ANY DATA FOR JOB MEMBER IN APPLICATION
APPL
Explanation: The exit was called to return JCL to Tivoli OPC, but no data was returned.
System action: The current operation status is set to ended-in-error with error code OJCV.
Problem determination: Check that the exit works correctly and is correctly installed.
System programmer response: Correct all errors and restart Tivoli OPC.
EQQJ614E THE AMOUNT OF DATA RETURNED BY THE JCL IMBED EXIT USRX FOR JOB MEMBER IN
APPLICATION APPL EXCEEDS THE MAXIMUM AMOUNT SUPPORTED
Explanation: The exit was called to return JCL to Tivoli OPC, but more than 256KB (kilobytes) of data was returned.
System action: The current operation status is set to ended-in-error with error code OJCV.
Problem determination: Check that the exit works correctly and is correctly installed.
System programmer response: Correct all errors and restart Tivoli OPC.
EQQJ615E THE JCL IMBED EXIT USRX COULD NOT BE LOADED. THE EXIT WILL BE FLAGGED AS NOT
USABLE
Explanation: Tivoli OPC was unable to load the exit. Tivoli OPC does not try to call it again. The exit is flagged as
not executable.
System action: The current operation status is set to ended-in-error with error code OJCV.
Problem determination: Check the JCL FETCH directive referring to the exit and make sure that the exit is in the
current load libraries of the started task JCL for Tivoli OPC.
System programmer response: Correct all errors and restart Tivoli OPC.
EQQJ616E THE JCL IMBED EXIT USRX HAS ABENDED WHILE PROCESSING JOB MEMBER IN APPLICATION
APPL. SEE THE SYSUDUMP DATA SET FOR MORE INFORMATION. THE EXIT WILL BE FLAGGED
AS NOT USABLE
Explanation: The exit abended while processing. Tivoli OPC does not try to call it again. The exit is flagged as not
executable.
System action: The current operation status is set to ended-in-error with error code OJCV.
System programmer response: Correct all errors in the exit and restart Tivoli OPC.

190

Tivoli OPC Messages and Codes

EQQJ617E EQQJ706E

EQQJ617E JOB MEMBER IN APPLICATION APPL REFERS TO AN UNUSABLE JCL IMBED EXIT, USRX. NO
DATA CAN BE RETRIEVED USING THIS EXIT
Explanation: Tivoli OPC has previously discovered an abend in this exit and marked it as not executable. This exit
is not called again.
System action: The current operation status is set to ended-in-error with error code OJCV.
System programmer response: Correct the exit and restart Tivoli OPC to reuse the exit.
EQQJ618E OPC COULD NOT ALLOCATE STORAGE ENOUGH FOR RECORD READ FROM JS DATA SET.
APPLICATION IS: APPL, JOBNAME IS MEMBER
Explanation: Tivoli OPC tried to allocate storage for a record read from the JS dataset, but the request for storage
failed.
System action: The operation status depends on the SUBFAILACTION keyword in the JTOPTS initialization
statement. The operation can:
Keep status R or extended status RE
Get status C (complete)
Get status E (ended-in-error) with error code OSUF.
System programmer response: Make sure that Tivoli OPC is running in a large enough region and restart Tivoli
OPC.
EQQJ702E THE JCL VARIABLE TABLE HAS BEEN DELETED
Explanation: The JCL variable table has been removed from the Tivoli OPC database.
System action: The variable table is deleted.
User response: None.
EQQJ703E THE JCL VARIABLE TABLE IS BEING UPDATED BY ANOTHER USER
Explanation: You cannot access the variable table because it is being updated by another user.
System action: The system waits for you to respond.
User response: Try again later.
EQQJ704E THE JCL VARIABLE TABLE TID ALREADY EXISTS
Explanation: You have tried to create a table that already exists.
System action: The system waits for you to respond.
User response: Enter the correct data and try again.
EQQJ705I THE JCL VARIABLE TABLE HAS BEEN REPLACED IN THE DATA BASE
Explanation: The JCL variable table has been modified and successfully updated in the database.
System action: The system waits for you to respond.
User response: None.
EQQJ706E JCL VARIABLE TABLE ENTRY COULD NOT BE RETRIEVED
Explanation: You have tried to access a JCL variable table that has been deleted since the variable table list was
displayed.
System action: The system waits for you to respond.
User response: Check if another user has already deleted the table.

Chapter 16. EQQJnnn Messages

191

EQQJ707I EQQJ717E

EQQJ707I A JCL VARIABLE DEFINITION HAS BEEN CREATED
Explanation: A JCL variable definition has been created and inserted in the database.
System action: None.
User response: None.
EQQJ708I THE JCL VARIABLE TABLE HAS BEEN REPLACED IN THE DATA BASE
Explanation: The JCL variable table has been modified and successfully replaced in the database.
User response: None.
System action: None.
EQQJ712E THE VARIABLE TO BE DELETED HAS DEPENDENCIES
Explanation: Another variable is dependent on this variable.
System action: None.
User response: To delete this variable, first remove the dependency. You can reassign the dependency, delete the
dependency, or delete the dependent variable.
EQQJ713E THE NUMBER OF VALUES MUST BE EVEN FOR RANGE TYPE
Explanation: You specified an odd number of values for a range verification.
System action: The system waits for you to respond.
User response: Correct the error and try again.
EQQJ714E THE LIST OF VALUES CONTAINS A BAD VALUE PAIR
Explanation: One of the pairs of values that you specified is in error.
System action: The system waits for you to respond.
User response: Correct the error and try again.
EQQJ715E THE CHARACTER CHR IN POSITION POS IS INVALID
Explanation: The value that you entered contains a character that is not numeric.
System action: The system waits for you to respond.
User response: Correct the error and try again.
EQQJ716E ONE VALID VALUE CANNOT EXCEED 44 POSITIONS
Explanation: You defined as valid a value that contains more than 44 characters. This is not allowed.
System action: The system waits for you to respond.
User response: Correct the error and try again.
EQQJ717E THE DEPENDENT VARIABLE VALUE IS INVALID FOR THE VERIFICATION TYPE
Explanation: The dependent value that you entered does not comply with the verification rules for the dependent
variable.
System action: The system waits for you to respond.
User response: Enter the correct value.

192

Tivoli OPC Messages and Codes

EQQJ800E EQQJ810I

EQQJ800E INVALID VALUE. MUST BE Y, N OR P
Explanation: Data entry error; see “Data Entry Errors” on page 2.
In this field, you can enter only Y (for Yes), N (for No), or P (for Prompt).
EQQJ801E VALUES/RANGE MUST BE SPECIFIED FOR RANGE/LIST
Explanation: You specified verification type RANGE or LIST, but did not specify any values.
System action: The system waits for you to respond.
User response: Correct the error and try again.
EQQJ802E NUMERIC CAN ONLY BE SPECIFIED FOR RANGE/LIST VERIFICATION
Explanation: You specified a valid numeric field type, but did not specify RANGE or LIST verification.
System action: The system waits for you to respond.
User response: Correct the error and try again.
EQQJ805E INVALID VERIFICATION TYPE
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Valid types are ALPHA, NUM, ENUM, HEX, BIT, PICT, NAME, DSNAME, RANGE and LIST.
EQQJ806E INVALID VALUE LENGTH
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The length must be in the range 1 to 44.
EQQJ807E INVALID COMPARISON OPERATOR
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Valid operators are:
EQ
=

LT
<

GT
>

LE
<=

GE
>=

NE
¬=

NG
¬>

NL
¬<

EQQJ808I THERE ARE NO DEPENDENCIES DEFINED FOR THIS VARIABLE
Explanation: There are no dependencies defined for this variable.
System action: None.
User response: None.
EQQJ809E THE INDEPENDENT VALUE DOES ALREADY EXIST
Explanation: You specified a duplicate value for the independent variable.
System action: The system waits for you to respond.
User response: Correct the error and try again.
EQQJ810I THERE ARE NO VERIFICATION CRITERIA DEFINED FOR THIS VARIABLE
Explanation: There are no verification criteria defined for this variable.
System action: None.
User response: None.

Chapter 16. EQQJnnn Messages

193

EQQJ811E EQQJ819E

EQQJ811E THE VARIABLE ALREADY EXISTS IN THE CURRENT VARIABLE TABLE
Explanation: Data entry error; see “Data Entry Errors” on page 2.
You have defined a variable that already exists in this table.
EQQJ812E VARIABLE NAME CONTAINS AN INVALID CHARACTER
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQJ813E TABLE NAME CONTAINS AN INVALID CHARACTER
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQJ814E OWNER ID IS MISSING
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQJ815E SUBSTITUTION EXIT NAME CONTAINS AN INVALID CHARACTER
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQJ816E THE MAXIMUM NUMBER OF DEPENDENCIES IS 360
Explanation: You tried to define more than 360 dependencies.
System action: The system waits for you to respond.
User response: Type over the incorrect value and press Enter.
EQQJ817E THE INDEPENDENT VARIABLE NAME IS REQUIRED
Explanation: You tried to enter a value for an independent variable without specifying an independent variable
name.
System action: The system waits for you to respond.
User response: Correct the error and try again.
EQQJ818E THE VERIFICATION LENGTH DIFFERS FROM THE LENGTH OF VALID VALUES
Explanation: You have specified a verification length that is shorter than one of the values listed in the valid
VALUES or RANGES.
User response: Correct the length or values, and try again.
System action: The panel is redisplayed with the cursor pointing at the field that is in error.
EQQJ819E VALUE OF DEPENDENT IS TOO LONG
Explanation: The value in the value-of-dependent field is longer than the value length specified on the Specifying
Verification Criteria panel.
User response: Either change the value-of-dependent field or the value length of the dependent variable.
System action: The panel is redisplayed with the cursor pointing at the field that is in error.

194

Tivoli OPC Messages and Codes

EQQK000E EQQK021E

Chapter 17. EQQKnnn Messages
EQQK000E VALID-TO SPECIFICATION PRECEDES VALID-FROM SPECIFICATION
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The valid-to date must be later than the valid-from date.
EQQK001E OI ALREADY EXISTS IN OI DATA BASE
Explanation: You have attempted to create an operator instruction (OI) that already exists in the OI database.
System action: The system waits for you to respond.
User response: Exit and use the modify function instead of the create function.
EQQK002E VALIDITY PERIODS OF TEMPORARY OIS MUST NOT OVERLAP
Explanation: There is an existing operator instruction (OI) whose validity period overlaps with this temporary OI.
The validity period of a temporary OI is defined by a valid-from and valid-to specification. The validity periods of
temporary OIs must not overlap each other.
System action: The system waits for you to respond.
User response: Respecify valid-from and valid-to period limits.
EQQK003E OPERATOR INSTRUCTION NOT FOUND IN OI DATA BASE. REFRESH YOUR LIST
Explanation: You have attempted to browse, modify, or delete an operator instruction (OI) that no longer exists in
the OI database. Most likely, the OI has been deleted by another user after your list of OIs was created.
System action: The system waits for you to respond.
User response: Return to the selection panel, create a new list of OIs, and continue your work.
EQQK004W OPERATOR INSTRUCTION IS IN USE, TRY LATER
Explanation: Another user is currently updating the same operator instruction.
System action: The system waits for you to respond.
User response: Try again later.
EQQK007E YOU ARE NOT AUTHORIZED TO ACCESS THE OI DATA BASE
Explanation: You have attempted to access the operator instruction (OI) database, but you are not authorized to
access it.
System action: The system waits for you to respond.
User response: Contact your security administrator.
EQQK008E YOU ARE NOT AUTHORIZED TO UPDATE THE OI DATA BASE
Explanation: You have attempted to update the operator instruction (OI) database, but you are not authorized to
update it.
System action: The system waits for you to respond.
User response: Contact your security administrator.
EQQK021E BOTH DATE AND TIME MUST BE SPECIFIED, OR BOTH BLANK
Explanation: Data entry error; see “Data Entry Errors” on page 2.

 Copyright IBM Corp. 1991, 1999

195

EQQK022E EQQK029E

EQQK022E THE INPUT FIELD MUST BE ALL NUMERIC, OR BLANK
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQK023W THE OPERATOR INSTRUCTION CONTAINS NO TEXT
Explanation: The operator instruction (OI) that you selected does not contain any text.
System action: The system waits for you to respond.
User response: If this OI should contain text, use the Operator Instruction dialog to add the desired text.
EQQK024W IT IS NOT POSSIBLE TO SAVE AN OPERATOR INSTRUCTION WITHOUT TEXT
Explanation: An operator instruction must have a minimum of one line of text.
System action: The system waits for you to respond.
User response: Make sure that there is a minimum of one line of text or issue the CANCEL command to terminate
the CREATE, COPY, or MODIFY request.
EQQK025I THE OI WAS MODIFIED IN THE OI DATA BASE
Explanation: The operator instruction (OI) record was modified and the OI database was updated.
System action: None.
User response: None.
EQQK026E INVALID PARAMETERS PASSED TO THE MODULE
Explanation: The parameters passed to the module from the ISPF panels were invalid. This is an internal Tivoli
OPC error.
System action: The system waits for you to respond.
User response: Contact your system programmer.
System programmer response: Contact your IBM representative.
EQQK027I THE OI WAS ADDED TO THE OI DATA BASE
Explanation: The operator instruction (OI) record was added to the OI database.
System action: None.
User response: None.
EQQK028I THE OI WAS NOT MODIFIED IN THE OI DATA BASE
Explanation: The operator instruction (OI) record in the OI database was not updated, either because you canceled
your modify request or because no lines existed in the OI record that you attempted to store.
System action: None.
User response: None.

| EQQK029E THE UPDATE TO THE OI DATA BASE FAILED
| Explanation: The operator instruction (OI) record was modifed, but the OI database has not been updated due to a
| severe error.
| System action: None.
| User response: None.

196

Tivoli OPC Messages and Codes

EQQK030I EQQK040I

EQQK030I THE OI WAS NOT ADDED TO THE OI DATA BASE
Explanation: No operator instruction (OI) record was added to the OI database, either because you canceled your
create request or because no lines existed in the OI record that you attempted to add.
System action: None.
User response: None.
EQQK031E APPLICATION IDENTIFICATION MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQK032E THE NAME DOES NOT START WITH AN ALPHABETIC CHARACTER
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQK033E THE OPERATION NUMBER MUST BE IN THE RANGE 1 - 255
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQK034E THE NAME CONTAINS INVALID CHARACTER(S)
Explanation: Data entry error; see “Data Entry Errors” on page 2.
A name can be made up of the following valid characters: A through Z, 0 through 9, and national characters (that is,
#, $, and @).
EQQK035E BOTH VALID-FROM AND VALID-TO REQUIRED FOR TEMPORARY OIS
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Both a valid-from date and a valid-to date are required when creating temporary operator instructions (OIs).
EQQK036E THE OPERATION NUMBER CONTAINS A NON-NUMERIC CHARACTER
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The operation number must be numeric.
EQQK037E THE OPERATION NUMBER MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQK038E TIME MISSING IN VALID-FROM OR VALID-TO SPECIFICATION
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Both date and time are required when specifying a valid-from or a valid-to date.
EQQK039E DATE MISSING IN VALID-FROM OR VALID-TO SPECIFICATION
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Both date and time are required when specifying a valid-from or a valid-to date.
EQQK040I OI WAS DELETED FROM OI DATA BASE - REQUEST CONFIRMED
Explanation: The operator instruction (OI) that you selected was deleted from the OI database, as specified.
System action: None.
User response: None.

Chapter 17. EQQKnnn Messages

197

EQQK041I EQQK054I

EQQK041I OI NOT DELETED FROM OI DATA BASE - REQUEST NOT CONFIRMED
Explanation: The operator instruction (OI) that you selected was not deleted from the OI database. The initial
request was not confirmed.
System action: None.
User response: None.

| EQQK042E OI DELETE REQUEST FAILED DUE TO I/O ERROR
| Explanation: The operator instruction (OI) record was deleted, but the OI database has not been updated due to a
| severe error.
| System action: None.
| User response: None.
EQQK043E THE WORK STATION NAME MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQK044I NO OPERATOR INSTRUCTION MATCHED YOUR SELECTION CRITERIA
Explanation: No operator instructions matched the selection criteria that you specified.
System action: None.
User response: None.
EQQK050E A REMOVAL DATE FOR PURGING OLD TEMPORARY OIS MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQK051I PRESS ENTER TO CREATE REMOVAL JCL, OR END TO CANCEL
Explanation: You have requested to create JCL for a job to remove operator instructions. You must press ENTER
to generate the JCL or enter the END command to cancel your request.
System action: The system waits for you to respond.
User response: Press ENTER or the End PF-key (or enter the END command).
EQQK052E A VALID DATA SET NAME MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQK053E REPLY MUST BE Y OR N
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQK054I PRESS ENTER TO CREATE UPDATE JCL, OR END TO CANCEL REQUEST
Explanation: You have requested to create JCL for a job to mass update operator instructions. You must press
ENTER to generate the JCL or enter the END command to cancel your request.
System action: The system waits for you to respond.
User response: Press ENTER or the End PF-key (or enter the END command).

198

Tivoli OPC Messages and Codes

EQQK450E EQQK457E

EQQK450E THE APPLICATION DESCRIPTION AD DOES NOT EXIST
Explanation: When attempting to create or modify an operarator instruction (OI), the OI data is checked for validity.
A check is made for the corresponding operation. The validation failed because the application description AD does
not exist.
System action: The system waits for you to respond.
User response: Correct the application ID and save the OI.
EQQK455E APPLICATION DESCRIPTION AD HAS NO WORK STATION WS
Explanation: When attempting to create or modify an operator instruction (OI), the OI data is checked for validity. A
check is made for the corresponding operation. The validation failed because the application description AD has no
workstation WS.
System action: The system waits for you to respond.
User response: Correct the workstation name and save the OI.
EQQK456E APPLICATION DESCRIPTION AD HAS NO OPERATION OP
Explanation: When attempting to create or modify an operator instruction (OI), the OI data is checked for validity. A
check is made for the corresponding operation. The validation failed because the application description AD has no
operation OP.
System action: The system waits for you to respond.
User response: Correct the operation number and save the OI.
EQQK457E APPLICATION DESCRIPTION AD HAS NO OPERATION WS OP
Explanation: When attempting to create or modify an operator instruction (OI), the OI data is checked for validity. A
check is made for the corresponding operation. The validation failed because the application description AD has no
operation WS OP.
System action: The system waits for you to respond.
User response: Correct the operation number and save the OI.

Chapter 17. EQQKnnn Messages

199

200

Tivoli OPC Messages and Codes

EQQL000E EQQL006I

Chapter 18. EQQLnnn Messages
EQQL000E YOU ARE NOT AUTHORIZED TO ACCESS THE LTP DATA SET
Explanation: You have attempted to access the long-term plan (LTP) dataset, but you are not authorized. Or, you
do not have access authority to at least one of the following Tivoli OPC resources that are used together with the LTP
dataset: the application description database, the calendar database, or the workstation description database.
System action: The system waits for you to respond.
User response: If you require access to the LTP dataset or to any of the related resources given, contact your
security administrator.
EQQL001E YOU ARE NOT AUTHORIZED TO UPDATE THE LTP DATA SET
Explanation: You have attempted to access the long-term plan (LTP) dataset for update but you are not authorized.
Or, you do not have access authority to at least one of the following Tivoli OPC resources that are used together with
the LTP dataset: the application description database, the calendar database, or the workstation description database.
System action: The system waits for you to respond.
User response: If you require access to the LTP dataset or to any of the related resources given, contact your
security administrator.
EQQL002I OCCURRENCE IS UPDATED
Explanation: The long-term plan (LTP) record for the occurrence has been updated.
System action: None.
User response: None.
EQQL003I THE OCCURRENCE IS NOT UPDATED
Explanation: The long-term plan (LTP) record for the occurrence was not updated because you canceled your
modify request.
System action: None.
User response: None.
EQQL004I THE OCCURRENCE IS NOT UPDATED
Explanation: The long-term plan (LTP) record for the occurrence was not updated because its content was not
changed.
System action: None.
User response: None.
EQQL005E LONG-TERM PLAN IS BEING UPDATED BY SOMEONE ELSE
Explanation: You have attempted to update the long-term plan (LTP) dataset, but it is being updated by another
user. The LTP dataset can only be updated by one user at a time.
System action: The system waits for you to respond.
User response: Try again later.
EQQL006I THE OCCURRENCE IS DELETED
Explanation: The long-term plan (LTP) record for the occurrence has been deleted from the LTP dataset.
System action: None.
User response: None.

 Copyright IBM Corp. 1991, 1999

201

EQQL007I EQQL018E

EQQL007I THE OCCURRENCE IS CREATED
Explanation: A long-term plan (LTP) record for the occurrence has been added to the LTP dataset.
System action: None.
User response: None.
EQQL008E THE DEPENDENCY IS ALREADY DELETED
Explanation: You have tried to delete a dependency that has already been deleted.
System action: The request is rejected.
User response: None.
EQQL010E EITHER AN END DATE OR AN EXTENSION LENGTH MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQL011E THE END DATE MUST BE LATER THAN THE CURRENT END DATE
Explanation: The end date specified must be later than the current end date.
System action: The system waits for you to respond.
User response: Display the status of the long-term plan to view the current end date and reenter a valid end date.
EQQL012E AN APPLICATION ID MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQL013E START AND END OF PRINT MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQL014E REPORT TYPE MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQL015E SORT ORDER MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQL016E REPORT TYPE SPECIFIED IS NOT VALID
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Valid report types are F for full report, and D for dependencies only.
EQQL017E SORT ORDER SPECIFIED IS NOT VALID
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Valid sort orders are I for input arrival date, O for owner ID, and A for application ID.
EQQL018E PRINT END DATE MUST BE LATER THAN PRINT START DATE
Explanation: Data entry error; see “Data Entry Errors” on page 2.

202

Tivoli OPC Messages and Codes

EQQL019E EQQL102I

EQQL019E THE PRINT INTERVAL MUST BE WITHIN THE RANGE OF THE LTP
Explanation: You have specified a print end date or print start date that is outside the range of the long-term plan
(LTP) start and end dates.
System action: The system waits for you to respond.
User response: Check the displayed LTP start and end dates and reenter a valid print interval.
EQQL020E THE LTP CANNOT BE LONGER THAN FOUR YEARS
Explanation: The long-term plan (LTP) cannot be greater than four years in length, starting from the date of the first
uncompleted occurrence.
System action: The system waits for you to respond.
User response: Enter a valid end date.
EQQL022E THE EXTENSION LENGTH SHOULD BE A NUMERIC VALUE FROM 0001 TO 1461
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQL023E EXTENSION LENGTH AND START DATE CANNOT BE ENTERED TOGETHER
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQL024E EITHER AN END DATE OR AN EXTENSION LENGTH MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQL025E IF YOU SPECIFY A START DATE YOU MUST ALSO SPECIFY AN END DATE
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQL026E THE END DATE MUST BE LATER THAN THE CURRENT DATE
Explanation: The end date for creation of a long-term plan (LTP) must be later than the current date.
System action: The request is rejected.
User response: Correct the LTP end date and retry.
EQQL100E THE SPECIFIED DEPENDENCY TYPE MUST BE P OR S
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The dependency type P stands for predecessor and S stands for successor.
EQQL101W THE LTP DATA SET IS EMPTY - ONLY LTP CREATE ALLOWED
Explanation: You have attempted to extend the long-term plan (LTP), but there is no LTP.
System action: The system returns you to the SELECTING LONG TERM PLAN BACKGROUND JOB menu so that
you can select another function.
User response: Select option 7 to create the LTP.
EQQL102I NO LISTITEM DEFINED FOR THIS OCCURRENCE
Explanation: No items matched the selection criteria that you specified for LISTITEM.
System action: None.
User response: None.

Chapter 18. EQQLnnn Messages

203

EQQL310E EQQL464E

EQQL310E THE LTP DATA SET IS EMPTY - NO HEADER FOUND
Explanation: You have attempted to do one of the following:
Submit a long-term plan (LTP) batch job, but there is no header record in the LTP dataset
Make a trial plan, but no LTP exists.
System action: The system waits for you to respond.
User response: Select the background job that creates a new LTP and try again.
EQQL311E AN APPLICATION ID IS REQUIRED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQL312E AN INPUT ARRIVAL DATE IS REQUIRED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQL313E AN INPUT ARRIVAL TIME IS REQUIRED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQL314E A DEADLINE DATE IS REQUIRED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQL315E A DEADLINE TIME IS REQUIRED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQL316E A CURRENT PLAN EXISTS
Explanation: You have attempted to create a long-term plan (LTP) without first refreshing the LTP. Occurrences in
the LTP have been selected by daily planning and might have been included in the current plan.
System action: The system waits for you to respond.
User response: Either select LTP EXTEND or perform a REFRESH from the Service dialog and request the LTP
CREATE again.
EQQL317E A START DATE MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQL318E THE END DATE MUST BE LATER THAN THE START DATE
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQL319E VALID REPLY IS Y, N, OR BLANK
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQL464E NO COMPUTER OPERATION(S) FOUND IN APPLICATION
Explanation: Job setup cannot be done because the application does not contain any computer operations.
System action: The system waits for you to respond.
User response: Add a computer operation to the application and try again.

204

Tivoli OPC Messages and Codes

EQQL465E EQQL472E

EQQL465E DEPENDENCY LTPDERR NOT FOUND
Explanation: The specified dependency (LTPDERR) could not be found in the long-term plan (LTP) dataset.
System action: The system waits for you to respond.
User response: Check that the specified dependency is correctly defined.
EQQL466E OCCURRENCE HAS SUCCESSOR IN CURRENT PLAN, CANNOT BE MOVED
Explanation: The run date and run time of the occurrence cannot be changed because the occurrence has a
successor that is part of the current plan.
System action: The system waits for you to respond.
User response: Check that the dependency for the occurrence is correct and that you have correctly specified the
occurrence.
EQQL467E LTPDERR IS ALREADY IN CURRENT PLAN
Explanation: You have attempted to add a dependency for an occurrence that is already part of the current plan.
System action: The system waits for you to respond.
User response: Enter a valid dependency.
EQQL468E LTPDERR CANNOT HAVE A DEPENDENCY ON ITSELF
Explanation: You specified a dependency for an occurrence, but the dependency is on the occurrence itself. This is
not valid.
System action: The system waits for you to respond.
User response: Enter a valid dependency.
EQQL469E DEPENDENCY ON LTPDERR ALREADY SPECIFIED
Explanation: You specified a dependency that already exists for this occurrence.
System action: The system waits for you to respond.
User response: Enter a valid dependency.
EQQL471E LTPDERR CANNOT HAVE MORE SUCCESSORS
Explanation: You have specified too many successors for this predecessor operation. The maximum number of
possible dependencies depends on the maximum record size in the long-term plan (LTP) VSAM file. If the default
maximum record size is used, the maximum number of dependencies (predecessors and successors) is 3574.
System action: The system waits for you to respond.
User response: Review the dependencies for this predecessor.
EQQL472E LTPDERR CANNOT HAVE MORE PREDECESSORS
Explanation: You have specified too many predecessors for this successor operation. The maximum number of
possible dependencies depends on the maximum record size in the long-term plan (LTP) VSAM file. If the default
maximum record size is used, the maximum number of dependencies (predecessors and successors) is 3574.
System action: The system waits for you to respond.
User response: Review the dependencies for this successor.

Chapter 18. EQQLnnn Messages

205

EQQL473E EQQL498E

EQQL473E MORE DEPENDENCIES DEFINED FOR LTPDERR THAN WILL FIT IN ONE RECORD
Explanation: You have specified too many dependencies for the current long-term plan (LTP) occurrence. The
maximum number of possible dependencies depends on the maximum record size in the LTP VSAM file. If the
default maximum record size is used, the maximum number of dependencies is 3574.
System action: The Long-Term Plan dialog waits for you to respond.
User response: Enter the primary command CANCEL to return to the calling panel or enter the DELETE row
command for one or more unnecessary dependencies.
EQQL474E MORE OPERATIONS CHANGED FOR LTPDERR THAN WILL FIT IN ONE LTP RECORD
Explanation: You have updated too many operations in the current long-term plan (LTP) occurrence. The maximum
number of changed operations depends on the maximum record size in the LTP VSAM file and on the number of
external dependencies for the current occurrence.
System action: The Long-Term Plan dialog waits for you to respond.
User response: Enter the primary command CANCEL to return to the calling panel.
EQQL480E INPUT ARRIVAL TIME: T24. RESPECIFY T00 ON THE FOLLOWING DAY
Explanation: T24 is not a valid input arrival time.
System action: The system waits for you to respond.
User response: Respecify the input arrival time as suggested (T00).
EQQL481E DEADLINE TIME: T00. RESPECIFY T24 ON THE PREVIOUS DAY
Explanation: T00 is not a valid deadline time.
System action: The system waits for you to respond.
User response: Respecify the deadline time as suggested (T24).
EQQL482E PRIORITY MUST BE A NUMBER FROM 1 - 9
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQL487E RUN DATE IS EARLIER THAN THE LTP START DATE LTPSDAY
Explanation: You specified a run date that is earlier than the long-term plan (LTP) start date LTPSDAY. This is not
valid.
System action: The system waits for you to respond.
User response: Enter a valid run date.
EQQL489E NO OCCURRENCE MATCHES THE SEARCH CRITERIA
Explanation: No dependent occurrence matched the search criteria that you specified to generate a list of
occurrences.
System action: The system waits for you to respond.
User response: Respecify your selection criteria.
EQQL498E W._O IS FIRST OPERATION, INPUT ARRIVAL MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The first operation (W._O) in an occurrence must have a specified input arrival time.

206

Tivoli OPC Messages and Codes

EQQL499E EQQL510E

EQQL499E W._O IS THE LAST OPERATION, A DEADLINE MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The last operation (W._O) in an occurrence must have a specified deadline.
EQQL504E APPLICATION DEPAID NOT FOUND
Explanation: The application (DEPAID) specified in the long-term plan (LTP) occurrence was not found in the
application description database. The application has been deleted from the application description database or you
do not have read access to the application description for the dependent application.
System action: The system waits for you to respond.
User response: Check why the application description cannot be found. If the application description has been
inadvertently deleted, reenter it.
EQQL505E APPLICATION APPL NOT FOUND
Explanation: The application (APPL) specified in the long-term plan (LTP) occurrence was not found in the
application description database.
Possible explanations are:
The application description has been deleted from the application description database, but the corresponding
occurrences in the LTP dataset have not deleted.
You do not have read access to the application description for this application.
The application was not active at the input arrival time of the LTP occurrence.
System action: The system waits for you to respond.
User response: Check why the application description cannot be found. If the application description has been
inadvertently deleted, reenter it.
EQQL506E DEPENDENT APPLICATION IS NOT AVAILABLE IN AD DATA SET
Explanation: This occurrence has one or more external dependencies that are not available to you. The dependent
application has been deleted from the application description database or you do not have read access to the
application description for the dependent application.
System action: The system waits for you to respond.
User response: Check why the application description cannot be found. If the application description has been
inadvertently deleted, reenter it. Check operations with no workstation name and operation number 000.
EQQL507E RUN DATE SPECIFIED IS LATER THAN THE LTP END LTPEDAY
Explanation: You specified a run date that is later than the long-term plan (LTP) end date.
System action: The system waits for you to respond.
User response: Enter a run date within the range of the LTP.
EQQL509E THE SPECIFIED OCCURRENCE ALREADY EXISTS
Explanation: You specified an occurrence that already exists.
System action: The system waits for you to respond.
User response: Change the data to make a new entry or exit.
EQQL510E DEADLINE IS EARLIER THAN (OR EQUAL TO) THE INPUT ARRIVAL
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The deadline date must be later than the input arrival date.

Chapter 18. EQQLnnn Messages

207

EQQL512E EQQL566E

EQQL512E THE VARIABLE TABLE IS NOT DEFINED TO OPC
Explanation: Data entry error; see “Data Entry Errors” on page 2.
You have tried to define a variable table ID that does not exist in Tivoli OPC's database.
EQQL513E THE VARIABLE TABLE NAME CONTAINS AN INVALID CHARACTER
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQL514E YOU ARE NOT AUTHORIZED TO READ THE JCL VARIABLE TABLE DATA BASE
Explanation: You have attempted to refer to a JCL variable table. To do this, you need read authority to the JCL
variable table database.
System action: The system waits for you to respond.
User response: If you need to refer to JCL variable table names, contact your security administrator.
EQQL530E I/O-ERROR READING CALENDAR. DEFAULT DAY STATUS USED
Explanation: An I/O error occurred when reading the calendar database. The default day status is used.
System action: The system waits for you to respond.
User response: If the default should not be used, enter the correct data.
EQQL540E OCCURRENCE IN A GROUP MUST BE REMOVED BEFORE IT CAN BE DELETED
Explanation: An occurrence that belongs to an occurrence group cannot be deleted.
System action: The system waits for you to respond.
User response: You must remove the occurrence from the group before you can delete it. To do this, either type
the row command RG on the LONG TERM PLAN OCCURRENCES panel or erase the group definition ID field on the
MODIFYING OCCURRENCE DATA panel.
EQQL541W APPLICATION IS A MEMBER OF A GROUP. CONSIDER ADDING THE OTHER MEMBERS
Explanation: The application is a member of an application group. This message is issued as a reminder in case
you need also to add the other members of the same group to the long-term plan.
System action: Normal processing continues.
User response: If applicable, create occurrences in the long-term plan for the other applications in the same group.
EQQL542E OCCURRENCE IS NOT A MEMBER OF AN OCCURRENCE GROUP
Explanation: The occurrence does not belong to an occurrence group.
System action: The request is rejected.
User response: None.
EQQL566E INPUT ARRIVAL TIME SPECIFIED PRECEDES THE CP END LTPPNEND, LTPPNENT
Explanation: You cannot modify, delete, or add an occurrence to the long-term plan (LTP) that has an input arrival
time within the range of the current plan.
System action: The request is rejected.
User response: Make sure that input arrival is correctly specified. If it is and you still want to process the
occurrence, use the Modify Current Plan dialog instead.
If you need to delete a dependency to an occurrence in the current plan, use the Modify Current Plan dialog to delete
the predecessor specification.

208

Tivoli OPC Messages and Codes

EQQL567I EQQL706E

EQQL567I LTPCHIAD, LTPCHIAT INPUT ARRIVAL OUTSIDE OCCURRENCE TIME LIMIT
Explanation: The operation input arrival date and time LTPCHIAD, LTPCHIAT is outside the occurrence time limit.
System action: None.
User response: None.
EQQL568I LTPCHDD, LTPCHDT DEADLINE PAST OCCURRENCE TIME LIMIT
Explanation: The operation deadline LTPCHDD, LTPCHDT is outside the occurrence time limit.
System action: None.
User response: None.
EQQL570I THE INPUT ARRIVAL SPECIFIED IS LATER THAN THE DEADLINE
Explanation: The operation input arrival date and time are later than the application deadline.
System action: The system waits for you to respond.
User response: If the input arrival date and time are not what you intended, change them.
EQQL572E DATE OR TIME IS MISSING FROM THE INPUT ARRIVAL
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQL573E DATE OR TIME IS MISSING FROM THE DEADLINE
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQL701E INVALID DATA LENGTH IN LONG TERM PLAN REQUEST: L
Explanation: An internal parameter list, consisting of a sequence of control blocks followed by an application
description record, was validated and found to have an invalid length.
System action: If this is a request to the program interface function, the request is rejected and control is returned
with the return code set to error.
Problem determination: The dump dataset (ddname EQQDUMP) contains a dump of the control blocks.
User response: This is likely to be an internal error. If possible, do the requests in a different order and rerun.
System programmer response: If you cannot find a valid reason for the error, make the dump dataset and the
message log available and contact your IBM representative.
EQQL705E THE APPLICATION DESCRIPTION AD COULD NOT BE FOUND REQUESTED AS PREDECESSOR
TO LTP OCCURRENCE LTOC
Explanation: The application AD is specified in a program interface request to set up a dependency between two
long-term plan occurrences. Its application description could not be found.
System action: If this is a request to the program interface function, the request is rejected and control is returned
with the return code set to error.
User response: Correct the application ID and resubmit the job.
EQQL706E PREDECESSOR OPERATION WSN OPNO DOES NOT EXIST IN AD AD REQUESTED AS
PREDECESSOR TO LTP OCCURRENCE LTOC
Explanation: The operation WSN OPNO is specified in a program interface request to set up a dependency between
two long-term plan occurrences. The specified application description does not contain the operation.
System action: If this is a request to the program interface function, the request is rejected and control is returned
with the return code set to error.
User response: Correct the application ID, workstation name, or operation number, and resubmit the job.

Chapter 18. EQQLnnn Messages

209

210

Tivoli OPC Messages and Codes

EQQMA02E EQQMA07E

Chapter 19. EQQMnnn Messages
| EQQMA02E THE CONNECTOR HAS BEEN STOPPED
| Explanation: The requested action cannot be performed because the Connector has been stopped.
| System action: None.
| User response: Start the Connector.
| EQQMA03E THE CODEPAGE CP CANNOT BE FOUND
| Explanation: The code page that was selected during the configuration of the Connector cannot be found.
| System action: None.
| User response: Verify that the code page that you selected is available.
| EQQMA04E THIS VERSION OF OPC CONNECTOR IS NOT COMPATIBLE WITH THE CONNECTED OPC.
|
THE CONNECTED OPC VERSION IS X.X.X. WITH PIF LEVEL Y
| Explanation: You tried to use a version of the OPC Connector that does not support the version of the connected
| OPC.
| System action: None.
| User response: Install the correct version of the OPC Connector.
| EQQMA05E THE OPC CONNECTOR CANNOT COMMUNICATE WITH THE OPC SERVER AND RETRIEVE
|
VERSION INFORMATION.
|
User Response: To fix the problem, do the following:
|

1. Check configuration of:

|
|
|

The OPC Connector
The Network
The OPC Server

2. Check that the OPC Server is running.

3. Restart the OPC Connector.

The reason is:

| Explanation: The Connector cannot obtain the version information from OPC due to an error that is displayed in the
| message after “The reason is:.”
| System action: None.
| User response: Resolve the connection problem and restart the Connector.
| EQQMA07E AN INTERNAL APPLICATION ERROR HAS OCCURRED.
|
THIS VERSION OF OPC IS NOT COMPATIBLE WITH THE FUN FUNCTIONALITY.
|
THE CONNECTED OPC VERSION IS X.X.X. WITH PIF LEVEL Y
|
THE REQUIRED OPC VERSION IS A.A.A. WITH PIF LEVEL Z
| Explanation: You tried to use a functionality FUN of OPC that is not supported by the version of the connected
| OPC.
| System action: None.
| User response: Install the correct version of the OPC or do not use the functionality FUN.

 Copyright IBM Corp. 1991, 1999

211

EQQMA10E EQQMA17E

| EQQMA10E COMMUNICATION ERROR BETWEEN OPC CONNECTOR AND SERVER
| Explanation: A communication error has occurred between the Connector and the Tivoli OPC server. The
| messages following describe the error in more detail.
| System action: None.
| User response: Check that the Tivoli OPC address and port number are set correctly in the Connector and that
| there are no network problems between the Connector and the MVS system.
| EQQMA11E CANNOT ALLOCATE CONNECTION: ID
| Explanation: The Connector is unable to create a new connection between the Connector and the Tivoli OPC
| server, where ID is the name of the connection. The messages following describe the error in more detail.
| System action: None.
| User response: Check that the Tivoli OPC address and port number are set correctly in the Connector, the MVS
| code page is set correctly in the Connector, and there are no network problems between the Connector and the MVS
| system. Check that the values set in the Connector are valid and that you are authorized to use Tivoli OPC.
| EQQMA12E COMMUNICATION ERROR BETWEEN OPC CONNECTOR AND SERVER DURING SEND
| Explanation: A communication error has occurred during the send between the Connector and the Tivoli OPC
| server. The messages following describe the error in more detail.
| System action: None.
| User response: Check that the Tivoli OPC address and port number are set correctly in the Connector and that
| there are no network problems between the Connector and the MVS system.
| EQQMA13E COMMUNICATION ERROR BETWEEN CONNECTOR AND SERVER DURING RECEIVE
| Explanation: A communication error has occurred during the receive between the Connector and the Tivoli OPC
| server The messages following describe the error in more detail.
| System action: None.
| User response: Check that the Tivoli OPC address and port number are set correctly in the Connector and that
| there are no network problems between the Connector and the MVS system.
| EQQMA15E INVALID IP ADDRESS: ADDRESS
| Explanation: The IP address ADDRESS is invalid.
| System action: None.
| User response: Check that the Tivoli OPC IP address is set correctly in the Connector.
| EQQMA16E INVALID IP PORT NUMBER: PORT
| Explanation: The IP port number PORT is invalid.
| System action: None.
| User response: Check that the Tivoli OPC IP port number is set correctly in the Connector.
| EQQMA17E TCP/IP SOCKET I/O ERROR DURING FUNCTION CALL FOR “CONNID”, FAILED WITH ERROR:
|
NUMERROR = TEXTERROR
| Explanation: This message gives details of the connection error that has occurred. FUNCTION is the operation,
| CONNID is the IP addresses and ports, NUMERROR is the error number, and TEXTERROR is the error code
| description, if available.
| System action: None.
| User response: Correct the network problem.

212

Tivoli OPC Messages and Codes

EQQMA18E EQQMA24E

| EQQMA18E REMOTE CONNECTION CLOSED: CONNID
| Explanation: The connection between the Connector and the server has been closed.
| System action: None.
| User response: Check that the Tivoli OPC server is running. If not, correct any problems and restart the server.
| EQQMA19E TIMEOUT OF TIME MS EXCEEDED FOR CONNID
| Explanation: A timeout error occurred for the connection CONNID, where TIME is the number of milliseconds (ms)
| that the socket has waited.
| System action: None.
| User response: Check that the network is working correctly.
| EQQMA20E AN INTERNAL APPLICATION ERROR HAS OCCURRED. UNSUPPORTED FILTER OF TYPE
|
FILTERTYPE
| Explanation: The Connector has received a filter that is one of the FILTERTYPE filters, but that is not supported for
| the record type on which you are filtering.
| System action: None.
| User response: Use a supported filter.
| EQQMA21E AN INTERNAL APPLICATION ERROR HAS OCCURRED. UNSUPPORTED FILTER TYPE
| Explanation: The Connector has received a filter that is not supported for the record type on which you are filtering.
| System action: None.
| User response: Use a supported filter.
| EQQMA22E AN INTERNAL APPLICATION ERROR HAS OCCURRED. THE TYPE RESTYPE FOR THE
|
RESOURCE IS INVALID
| Explanation: You cannot filter on resources of type RESTYPE.
| System action: None.
| User response: Use a supported resource type.
| EQQMA23E AN INTERNAL APPLICATION ERROR HAS OCCURRED. INVALID EXTENSION FOUND WHEN EXT
|
WAS EXPECTED
| Explanation: In the structure that the Connector has received there is an invalid extension. The correct extension is
| EXT.
| System action: None.
| User response: Correct the type of extension that is specified to the Connector in properties to EXT.
| EQQMA24E AN INTERNAL APPLICATION ERROR HAS OCCURRED. EXPECTED PROPERTY NOT FOUND
| Explanation: In the structure that the Connector has received there is no property, but an extension is expected.
| System action: None.
| User response: Provide the Connector with the correct extension in the properties.

Chapter 19. EQQMnnn Messages

213

EQQMA25E EQQMA40E

| EQQMA25E AN INTERNAL APPLICATION ERROR HAS OCCURRED. INVALID STRUCTURE FOUND WHEN
|
TYPE WAS EXPECTED
| Explanation: The expected structure TYPE was not found in the Connector.
| System action: None.
| User response: Correct the data structure that is passed to the Connector.
| EQQMA26E AN INTERNAL APPLICATION ERROR HAS OCCURRED. NO TARGET WORKSTATION FOUND
| Explanation: You specified a job that did not have a target workstation.
| System action: None.
| User response: Specify the target in the job (or job instance) data structure.
| EQQMA30E AN INTERNAL APPLICATION ERROR HAS OCCURRED. INVALID VALUE FOR FIELD NAME
| Explanation: The value specified in field NAME is invalid.
| System action: None.
| User response: Specify the correct value.
| EQQMA31E AN INTERNAL APPLICATION ERROR HAS OCCURRED. INVALID VALUE VAL FOR FIELD NAME:
|
MUST BE MIN ≤ NAME ≤ MAX
| Explanation: The value VAL is not valid for field NAME. It must be between MIN and MAX.
| System action: None.
| User response: Specify a correct value for the field.
| EQQMA32E AN INTERNAL APPLICATION ERROR HAS OCCURRED. INVALID VALUE "VAL" FOR FIELD NAME
| Explanation: The value VAL is not valid for field NAME.
| System action: None.
| User response: Specify a correct value for the field.
| EQQMA33E AN INTERNAL APPLICATION ERROR HAS OCCURRED. INVALID VALUE VAL FOR FIELD NAME
| Explanation: The value VAL is not valid for field NAME.
| System action: None.
| User response: Specify a correct value for the field.
| EQQMA34E AN INTERNAL APPLICATION ERROR HAS OCCURRED. INVALID ID VALUE NAME
| Explanation: The value NAME is not a valid ID.
| System action: None.
| User response: Specify a correct ID.
| EQQMA40E PIF ERROR: ID=MESSID, VARIABLES=VAR1, VAR2, VAR3, VAR4, VAR5, VAR6, VAR7, VAR8, VAR9,
|
VAR10
| Explanation: The Connector has received an error from Tivoli OPC, but the message catalog is unavailable. See
| this manual (Messages and Codes) for a description of the error MESSID. The variables are in the same order as
| specified in the message.
| System action: None.
| User response: Call Customer Support to notify them that this message is missing.

214

Tivoli OPC Messages and Codes

EQQMA50E EQQMA62E

| EQQMA50E AN INTERNAL APPLICATION ERROR HAS OCCURRED. UNEXPECTED VALUE IN FIELD NAME (IN
|
FILE FILENAME AT LINE LINENUM)
| Explanation: The Connector has encountered an unexpected value in field NAME at line LINENUM of the file
| FILENAME.
| System action: None.
| User response: Call Customer Support.
| EQQMA51E AN INTERNAL APPLICATION ERROR HAS OCCURRED. UNEXPECTED VALUE “VAL” IN FIELD
|
NAME (IN FILE FILENAME AT LINE LINENUM)
| Explanation: The Connector has encountered an unexpected value VAL in field NAME at line LINENUM of the file
| FILENAME.
| System action: None.
| User response: Call Customer Support.
| EQQMA52E AN INTERNAL APPLICATION ERROR HAS OCCURRED. UNEXPECTED VALUE VAL IN FIELD
|
NAME (IN FILE FILENAME AT LINE LINENUM)
| Explanation: The Connector has encountered an unexpected value VAL in field NAME at line LINENUM of the file
| FILENAME.
| System action: None.
| User response: Call Customer Support.
| EQQMA53E AN INTERNAL APPLICATION ERROR HAS OCCURRED. UNEXPECTED VALUE 'VAL' IN FIELD
|
NAME (IN FILE FILENAME AT LINE LINENUM)
| Explanation: The Connector has encountered an unexpected value VAL in field NAME at line LINENUM of the file
| FILENAME.
| System action: None.
| User response: Call Customer Support.
| EQQMA60E AN INTERNAL APPLICATION ERROR HAS OCCURRED. INVALID TIMER VALUE ("TIMER"):
|
FOUND "FOUND"
| Explanation: The timer value TIMER is invalid. The parser does not understand FOUND.
| System action: None.
| User response: Correct the value of the timer.
| EQQMA61E AN INTERNAL APPLICATION ERROR HAS OCCURRED. INVALID TIMER VALUE ("TIMER"):
|
UNEXPECTED END OF STRING
| Explanation: The timer value TIMER is invalid. The parser has encountered an unexpected end of string.
| System action: None.
| User response: Correct the value of the timer.
| EQQMA62E AN INTERNAL APPLICATION ERROR HAS OCCURRED. INVALID TIMER VALUE ("TIMER"):
|
EXPECTED AN INTEGER VALUE, FOUND "FOUND"
| Explanation: The timer value TIMER is invalid. The parser expects an integer value, but found FOUND.
| System action: None.
| User response: Correct the value of the timer.

Chapter 19. EQQMnnn Messages

215

EQQMA63E EQQMA69E

| EQQMA63E AN INTERNAL APPLICATION ERROR HAS OCCURRED. INVALID TIMER VALUE ("TIMER"):
|
UNKNOWN PRIMITIVE FOUND "FOUND"
| Explanation: The timer value TIMER is invalid. The parser does not understand FOUND.
| System action: None.
| User response: Correct the value of the timer.
| EQQMA64E AN INTERNAL APPLICATION ERROR HAS OCCURRED. INVALID TIMER VALUE ("TIMER"):
|
EXPECTED EXP FOUND "FOUND"
| Explanation: The timer value TIMER is invalid. The parser expects EXP., but found FOUND.
| System action: None.
| User response: Correct the value of the timer.
| EQQMA65E AN INTERNAL APPLICATION ERROR HAS OCCURRED. INVALID TIMER VALUE ("TIMER"):
|
MISMATCH WITH OPC RULES – THE INPUT RULE GENERATES "GEN" OPC RULE THAT IS NOT
|
EQUIVALENT. THE TIMER VALUES DO NOT HAVE ALL THE COMBINATIONS THAT ARE
|
EQUIVALENT TO THE OPC RULE
| Explanation: The timer value TIMER is invalid. An OPC rule that includes the timer value is GEN., but this rule also
| includes other days that are not in the timer.
| System action: None.
| User response: Correct the value of the timer.
| EQQMA66E AN INTERNAL APPLICATION ERROR HAS OCCURRED. INVALID TIMER VALUE: CANNOT
|
CONVERT TO AN OPC RULE
| Explanation: The parser is unable to convert the timer in an OPC rule.
| System action: None.
| User response: Correct the value of the timer.
| EQQMA67E AN INTERNAL APPLICATION ERROR HAS OCCURRED. INVALID TIMER VALUE ("TIMER"):
|
CANNOT USE ONLY AND EVERY RULES MIXED IN THE SAME TIMER VALUE
| Explanation: There are Only and Every rules mixed in the timer. In OPC you can use only one of them in a rule.
| System action: None.
| User response: Correct the value of the timer.
| EQQMA68E AN INTERNAL APPLICATION ERROR HAS OCCURRED. INVALID TIMER VALUE("TIMER"):
|
INVALID NUMERIC VALUE FOUND: MIN ≤ VAL ≤ MAX
| Explanation: The timer value TIMER is invalid. An invalid numeric value VAL is found. The value must be between
| MIN and MAX.
| System action: None.
| User response: Correct the value of the timer.
| EQQMA69E AN INTERNAL APPLICATION ERROR HAS OCCURRED. INVALID TIMER VALUE("TIMER"):
|
CANNOT USE TWO DIFFERENT VALUES FOR ORIGINSHIFT IN THE SAME TIMER VALUE
| Explanation: The timer value TIMER is invalid. You can only use one value for originshift.
| System action: None.
| User response: Correct the value of the timer.

216

Tivoli OPC Messages and Codes

EQQMA80E EQQM008E

| EQQMA80E THE CONNECTOR CAN'T PROVIDE THE NEXT BLOCK OF THE QUERY RESULTS
|
Possible reasons are:
|
|

1. Maintenance of the OPC Connector
2. Internal application error.

| Explanation: The iterator on which the operation is required is unknown. It may be invalid or have already been
| destroyed, for example, for a Connector restart or an abend.
| System action: None.
| User response: None.
| EQQMA81E OPC DOES NOT RECOGNIZE USER USERID
| Explanation: The user USERID is not authorized to log on to MVS. The messages following explain the reason.
| System action: None.
| User response: Change the user ID USERID to log on to the framework or add USERID to the list of users
| authorized for MVS. If USERID is already authorized on MVS, check that the MVS code page is in the Connector.
EQQM000E YOU DO NOT HAVE AUTHORITY TO ACCESS THE CURRENT PLAN
Explanation: To use the function you selected, you must have access authority to the current plan.
System action: The request is rejected and the system waits for you to respond.
User response: If you require access to the current plan, contact your security administrator.
EQQM001E YOU DO NOT HAVE AUTHORITY TO UPDATE THE CURRENT PLAN
Explanation: To use the function you selected, you must have update authority to the current plan.
System action: The request is rejected and the system waits for you to respond.
User response: If you need to update the current plan, contact your security administrator.
EQQM004E PRIORITY MUST BE A NUMBER FROM 1 - 9
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM005E THE MCP ADDED OPTION MUST BE Y, N, OR BLANK
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM006E THE RERUN OPTION MUST BE Y, N, OR BLANK
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM008E EXTERNAL DEPENDENCIES FORM A LOOP
Explanation: You specified an external dependency that generates a loop. This must be corrected.
System action: The dependency is rejected and the system waits for you to respond.
User response: Check your dependencies.

Chapter 19. EQQMnnn Messages

217

EQQM009E EQQM015I

EQQM009E THE SPECIFIED APPLICATION COULD NOT BE FOUND
Explanation: You specified an application that could not be found in the application description database. The
application may have been deleted after the list of applications was created.
System action: The system waits for you to respond.
User response: Return to the previous panel and re-create the list of applications. If the problem persists, contact
your system programmer.
System programmer response: Analyze messages in the Tivoli OPC message log to determine the cause of the
error. If there are no messages, contact your IBM representative.
EQQM010I OCCURRENCE ADDED TO THE CURRENT PLAN
Explanation: You specified an occurrence that was added to the current plan.
System action: None.
User response: None.
EQQM011I OCCURRENCE MODIFIED IN THE CURRENT PLAN
Explanation: You specified an occurrence that was modified in the current plan.
System action: None.
User response: None.
EQQM012I OCCURRENCE DELETED FROM THE CURRENT PLAN
Explanation: You specified an occurrence that was deleted from the current plan.
System action: None.
User response: None.
EQQM013I THE OCCURRENCE IS SET TO RERUN
Explanation: In the current plan, the status of the specified occurrence was changed to “rerun.”
System action: None.
User response: None.
EQQM014I THE OCCURRENCE IS SET TO WAITING
Explanation: In the current plan, the status of the specified occurrence was changed to “waiting.”
System action: None.
User response: None.
EQQM015I AN OCCURRENCE HAS BEEN COMPLETED
Explanation: You specified an occurrence that has been completed.
System action: None.
User response: None.

218

Tivoli OPC Messages and Codes

EQQM016E EQQM023E

EQQM016E THE OCCURRENCE HAS BEEN UPDATED BY AN AUTOMATIC EVENT
Explanation: During the time taken to enter the modifications for the occurrence, at least one operation status has
been updated because an automatic event has been processed.
System action: The request is rejected.
User response: Repeat the dialog request. The status set when the automatic event was processed is now the
initial status for the dialog request.
EQQM017E OCCURRENCE BEING UPDATED BY ANOTHER USER
Explanation: You selected an occurrence that is being updated by another user.
System action: The system waits for you to respond.
User response: Try again later.
EQQM018E OCCURRENCE ALREADY EXISTS - NOT ADDED
Explanation: You attempted to add an occurrence that already exists in the current plan.
System action: The occurrence is not added to the current plan and the system waits for you to respond.
User response: Check the existing occurrence to determine whether or not the occurrence specified should be
added with a new input arrival date and time.
EQQM019E THE SPECIFIED APPLICATION IS CURRENTLY BEING UPDATED
Explanation: You specified an application description that is currently being updated by another user.
System action: The system waits for you to respond.
User response: Try again later.
EQQM020E VALID STATUSES ARE W, S, C, E, AND U, IN ANY COMBINATION
Explanation: In the Modify Current Plan dialog, you entered an invalid status for selecting occurrences in the current
plan.
System action: The panel is redisplayed and the system waits for you to respond.
User response: Correct the invalid values.
EQQM021I THE OPERATION WAS RESET TO READY
Explanation: In the current plan, the status of the specified operation was reset to “ready.”
System action: None.
User response: None.
EQQM022I THE OPERATION WAS COMPLETED
Explanation: You specified an operation that has been completed.
System action: None.
User response: None.
EQQM023E A DELETED OCCURRENCE CANNOT BE MODIFIED
Explanation: You selected a function that attempts to modify an occurrence that has been deleted from the current
plan.
System action: The request is rejected.
User response: None.

Chapter 19. EQQMnnn Messages

219

EQQM024E EQQM030E

EQQM024E SUBSYSTEM REQUEST FAILED DUE TO I/O ERROR
Explanation: The modify current plan request failed because of an I/O error.
System action: The modify current plan function is terminated. No updates are made.
User response: Contact your system programmer.
System programmer response: Check the Tivoli OPC message log to determine the cause of the error.
EQQM025E DEPENDENT OPERATIONS HAVE BEEN CHANGED DURING SESSION. RS: XSSRS
Explanation: Operations that have external dependencies to the occurrence that you attempted to modify have been
changed in such a way that your modify request failed.
System action: The request is rejected. Message EQQMxssrsE is written to the message log, where xssrs is the
reason code displayed by this message.
User response: See the message indicated by the reason code.
EQQM026E REQUEST FAILED BECAUSE OF SUBSYSTEM ERROR
Explanation: The modify current plan request failed because of an error in the Tivoli OPC subsystem.
System action: The modify current plan function is terminated. No updates are made.
User response: Contact your system programmer.
System programmer response: Check the Tivoli OPC message log to determine the cause of the error.
EQQM027E REQUEST FAILED BECAUSE OF SUBSYSTEM ERROR. REASON: XSSRS
Explanation: The modify current plan request failed because of an error in the Tivoli OPC subsystem.
System action: The modify current plan function is terminated. No updates are made. Message EQQMxssrsE is
written to the message log, where xssrs is the reason code displayed by this message.
User response: See the message indicated by the reason code.
EQQM028I DELETE OF MAAID MAIMD MAIMT IGNORED WHILE CREATING NEW PLAN
Explanation: An attempt to delete an occurrence with status complete has been rejected because a daily planning
batch program is currently creating a new current plan. Occurrences that were complete when the daily planning job
started are removed, and are not available in the new plan.
System action: The request is rejected. Message EQQM937E is written to the Tivoli OPC message log.
User response: None.
EQQM029E REQUEST FAILED BECAUSE OF SUBSYSTEM ERROR
Explanation: The modify current plan request failed because of an error in the Tivoli OPC subsystem.
System action: The modify current plan function is terminated. No updates are made.
User response: Contact your system programmer.
System programmer response: Check the Tivoli OPC message log to determine the cause of the error.
EQQM030E INPUT ARRIVAL IS LATER THAN CURRENT PLAN END
Explanation: Data entry error; see “Data Entry Errors” on page 2.

220

Tivoli OPC Messages and Codes

EQQM031I EQQM040E

EQQM031I THE OCCURRENCE HAS NO EXTERNAL DEPENDENCIES
Explanation: The selected occurrence has no external dependencies.
System action: None.
User response: None.
EQQM032E UNSUPPORTED STATUS CHANGE OF OSEQ OP. WITH UNCOMPLETED PREDECESSOR(S)
Explanation: The request requires an operation in error status with error code OSEQ to change status. There are
restrictions as to how this can be done when the operation has uncompleted predecessors, that is, the operation is
still out of sequence. This is not one of the accepted ways.
System action: The request is rejected. The system waits for you to respond.
User response: The OSEQ operation can be reset to the proper status, waiting, by using the operation restart
request from the ended-in-error list panel. The modify occurrence request can also be used. The operation can be
deleted or the occurrence can be deleted or set to waiting. An occurrence rerun or a change of the operation status is
not accepted until all predecessors have been completed or the dependencies have been deleted.
EQQM033E CODE MUST BE ONE OF ST1E , ST1D , ST1P or ST1A
Explanation: You entered an invalid code for selecting occurrences from the current plan in the Modify Current Plan
dialog.
System action: The system waits for you to respond.
User response: Enter the correct code.
EQQM034E THE JCL FOR THIS OPERATION IS BEING EDITED BY ANOTHER USER
Explanation: You tried to rerun an operation, but the JCL for this operation is being edited by another user.
System action: The system waits for you to respond.
User response: Try again later.
EQQM035E ONE OF THE WS REFERENCED BY OPERATIONS IN THIS OCC. IS NOT IN CP
Explanation: Tivoli OPC was validating an occurrence to be added. A workstation referenced by an operation in this
occurrence is not defined to the current plan.
It is possible that a new workstation has been created, but the daily plan batch program has not yet been executed.
System action: The request is rejected.
User response: Examine the Tivoli OPC message log. Message EQQM933E identifies the workstation and
operation. Contact your system programmer.
System programmer response: If necessary, run a daily plan batch program to add the workstation to the current
plan.

| EQQM036W INPUT ARRIVAL CANNOT BE BLANK FOR A TIME DEPENDENT OPERATION
| Explanation: Tivoli OPC submits a time dependent operation as soon as possible after its input arrival, but this time
| is not specified.
| System action: The system waits for you to insert an Input Arrival Date and Time.
| User response: Specify an input arrival for the operation or set it to be not time dependent.
EQQM040E ERROR CODE MUST BE GIVEN FOR ERROR STATUS OPERATION
Explanation: An error code must be given for an operation in error.
System action: The panel is redisplayed.
User response: Correct the error.

Chapter 19. EQQMnnn Messages

221

EQQM041E EQQM065W

EQQM041E ERROR CODE MUST BE BLANK FOR OPERATION NOT IN ERROR
Explanation: Error code only has meaning for an operation in error.
System action: The panel is redisplayed.
User response: Change the operation status or blank out the error code.
EQQM043W THE OPERATION WAS NOT FOUND, MAY HAVE BEEN ALTERED
Explanation: The automatic job recovery request could not be processed because the operation record could not be
read.
System action: The automatic job recovery request is ignored. The system waits for you to respond.
User response: If the error persists, contact your system programmer.
System programmer response: To determine the cause of the error, check the Tivoli OPC message log for I/O
error messages issued at the time that the automatic job recovery request was made.
EQQM061E NEW STATUS MUST BE ONE OF THE SUPPORTED CHARACTERS
Explanation: The workstation status must be A, F, or O.
System action: The workstation status is not changed.
User response: Correct the status character or issue the CANCEL command to cancel the status change request.
EQQM062E THE FAIL/OFFLINE OPTIONS ENTERED ARE NOT VALID
Explanation: The restart option can be R (restart), E (set to error), or L (leave). The reroute option can be Y (yes,
reroute operations) or N (no, do not reroute).
System action: The workstation status does not change. No fail or offline actions are performed.
User response: Correct the options and try again.
EQQM063E THE ALTERNATE WS NAME IS NOT FOUND IN THE DATA BASE
Explanation: The alternative workstation is not defined in the workstation database.
System action: The workstation status does not change. Reroute is not performed to an alternative workstation.
User response: Correct the name specified for the alternative workstation or update the workstation description
database with this workstation name.
EQQM064E ALTERNATE WS IS REQUIRED TO BE CPU/WTO TYPE WS
Explanation: The alternative workstation is not defined in the workstation database as a computer type workstation.
System action: The workstation status does not change.
User response: Correct the name specified for the alternative workstation or update the workstation description
database for this workstation to specify the correct attributes.
To exit the modification without saving any changes, issue the CANCEL command.
EQQM065W FAIL/OFFLINE OPTIONS NOT APPLICABLE FOR SETTING WS TO ACTIVE
Explanation: Fail/offline options do not apply to active workstations. If you change the status of a workstation to A
(active), any previously defined fail/offline options are ignored.
System action: The system waits for you to respond.
User response: Confirm the request or cancel it.

222

Tivoli OPC Messages and Codes

EQQM066E EQQM109E

EQQM066E THE WORK STATION STATUS INHIBITS ALTERNATE WS SPECIFICATION
Explanation: An active workstation cannot have an alternative workstation.
System action: The workstation status does not change.
User response: Either change the workstation status to something other than A (active) or clear the alternative
workstation field in the panel.
EQQM067I WORK STATION WSID, HAS BEEN SET TO STAT STATUS
Explanation: The status of a workstation has changed, as you requested on the previous panel.
System action: The workstation status is changed. This may affect ongoing work.
User response: None.
EQQM068E THE CURRENT WS CANNOT BE ALTERNATE TO ITSELF
Explanation: The alternative workstation cannot be the current workstation.
System action: The workstation status does not change.
User response: Change the alternative workstation name.
EQQM100W DEADLINE IS EARLIER THAN INPUT ARRIVAL TIME - VALUE ACCEPTED
Explanation: You specified a deadline that is invalid because it is earlier than the input arrival time. However, the
deadline value is accepted.
System action: None.
User response: None.
EQQM104E NO APPLICATIONS MET THE SELECTION CRITERIA
Explanation: No applications were found in the application description database, which met the selection criteria that
you specified.
System action: The system waits for you to respond.
User response: Change the selection criteria.
EQQM106E DEP OPTIONS ARE: OCHCYES, OCHPRED, OCHSUCC, OCHGRP OR OCHCNO
Explanation: You entered a value for the dependency resolution attribute that is not recognized by the Modify
Current Plan dialog. You must change the value to one of the supported values defined by this message.
System action: The system waits for you to respond.
User response: Change the dependency resolution value.
EQQM107E BOTH DATE AND TIME MUST BE SPECIFIED FOR INPUT ARRIVAL
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM108E BOTH DATE AND TIME MUST BE SPECIFIED FOR DEADLINE
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM109E APPLICATION VALID-FROM IS LATER THAN PLAN END MPLENDI
Explanation: The valid-from date and time of the occurrence that you attempted to add to the current plan lie outside
the current plan end.
System action: The request is rejected. The system waits for you to respond.
User response: Use the Application Description dialog to change the valid-from date and time of the occurrence.

Chapter 19. EQQMnnn Messages

223

EQQM110E EQQM120E

EQQM110E OPERATIONS WITH DUPLICATE NUMBERS ARE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM112E THE OCCURRENCE CONTAINS UNCONNECTED OPERATIONS
Explanation: In the occurrence that you are modifying, there is more than one network of dependencies. This is not
allowed.
System action: The modification is rejected. The system waits for you to respond.
User response: Verify and correct the dependencies.
EQQM113E JOBNAME MOJBN MUST BE SAME IN JOB SETUP, PROCESS, AND PRINT
Explanation: The job name (MOJBN) specified for the job setup, process, and print operations must be the same.
System action: The system waits for you to respond.
User response: Verify and correct, for example, the dependencies or the job names.
EQQM115E A PROCESS OPERATION MUST PRECEDE A PRINT OPERATION
Explanation: A print operation must be preceded by a process operation.
System action: The system waits for you to respond.
User response: Verify and correct, for example, the print operation or the process operation.
EQQM117E WORK STATION MOWSN IS NOT FOUND IN THE CP, OR ACCESS WAS REVOKED
Explanation: The specified workstation (MOWSN) does not exist in the current plan or you are not authorized to
access this workstation.
System action: The system waits for you to respond.
User response: Change the occurrence so that it uses only workstations that are in the current plan. If you are not
authorized to access this workstation, contact your security administrator.
EQQM118E A SETUP OPERATION MUST HAVE A PROCESS SUCCESSOR
Explanation: A setup operation must be succeeded by a process operation.
System action: The system waits for you to respond.
User response: Verify and correct, for example, the setup operation or the process operation.
EQQM119E A PREDECESSOR TO OPERATION MONUM IS ALSO A SUCCESSOR
Explanation: A predecessor to operation MONUM is also a successor. This forms a dependency loop and is not
allowed.
System action: The system waits for you to respond.
User response: Verify the dependencies to the operation MONUM.
EQQM120E ADID: ADID, IA: IA, OPNO: OPNO, CAUSES A LOOP
Explanation: The specified dependencies create a loop in the operations network.
System action: The update request is rejected.
User response: Check your dependency specifications.

224

Tivoli OPC Messages and Codes

EQQM121W EQQM152E

EQQM121W THERE IS JCL ON THE JS FILE FOR OPERATION MONUM
Explanation: There is a record on the JS file that matches an operation on a computer workstation in the occurrence
being added. This record was not added during the current Modify Current Plan dialog session.
System action: The current panel is redisplayed.
User response: Use the J row command on the operation list panel to review the JCL for the operation defined by
this message. If the JCL is correct for the operation, exit JCL edit via the END command. If the JCL is not correct,
correct it, or delete it, and exit JCL edit via the END command.
EQQM130W OCCURRENCE HAS A PENDING PREDECESSOR, REQUEST IS NOT POSSIBLE
Explanation: The occurrence to be deleted or completed has a predecessor that is not yet in the current plan.
System action: The request is rejected.
User response: The function cannot be performed until the pending predecessor dependency is removed.
EQQM150E INPUT ARRIVAL IS LATER THAN CURRENT PLAN END CPED CPET
Explanation: A request to modify or create an occurrence on the current plan specifies an input arrival time later
than or equal to the current plan end time. All modifications to the current plan must be earlier than the current plan
end time.
System action: If this is a request to the program interface, the request is rejected and control is returned with the
return code set to error.
User response: Correct the input arrival time and resubmit the job.
EQQM151E CURRENT PLAN READ ERROR, AD NOT ADDED TO CURRENT PLAN
Explanation: A request to create an occurrence in the current plan failed due to an I/O error.
System action: If this is a request to the program interface, the request is rejected and control is returned with the
return code set to error.
Problem determination: The message log of the Tivoli OPC subsystem contains the I/O error message.
User response: Resubmit the job when the problem causing the I/O error has been corrected.
System programmer response: Review the message log of the Tivoli OPC subsystem to determine the cause of
the error. If you cannot determine the cause and the error persists, contact your IBM representative.
EQQM152E ALL OCCURRENCES OF AD BEFORE CP END CPED CPET EXIST
Explanation: A request to create an occurrence in the current plan failed because the occurrence already exists. No
input arrival time was given in the request, which implies that a default input arrival time should be used.
Problem determination: The default input arrival time is the current time, consisting of the current date, current
hour, and current minute. If an occurrence of the application with that input arrival time already exists, the next minute
is used. If that occurrence also exists, the following minute is used. This search for an input arrival time continues up
to the current plan end time.
System action: If this is a request to the program interface, the request is rejected and control is returned with the
return code set to error.
User response: If necessary, resubmit the job after either extending the current plan or deleting some existing
occurrence.

Chapter 19. EQQMnnn Messages

225

EQQM153E EQQM162W

EQQM153E IA NOT BEFORE CP END CPED CPET, AD NOT ADDED
Explanation: A request to create an occurrence in the current plan failed because the current plan end time has
passed. No input arrival time was given in the request, which implies that a default input arrival time should be used.
The default input arrival time is the current time, consisting of the current date, current hour, and current minute. The
request is rejected because the current plan ends before the current time.
System action: If this is a request to the program interface, the request is rejected and control is returned with the
return code set to error.
User response: If necessary, resubmit the job after extending the current plan.
EQQM154E ALL POTENTIAL EXTERNAL SUCCESSORS COULD NOT BE RESOLVED
Explanation: A request to create an occurrence in the current plan failed because the Resolve Required option was
Y (yes). There are also occurrences in the current plan that are possible successor occurrences, but the application
description defines more dependencies than could be resolved using existing successor candidates.
System action: The current occurrence is not added to the current plan.
User response: If necessary, change the Resolve Required option to N (no) and retry the request to add the
occurrence to the current plan.
EQQM155E OCCURRENCE WITH SAME ADID AND IA EXISTS IN LONG-TERM PLAN
Explanation: A request to create or modify an occurrence in the current plan specifies an application ID and input
arrival date and time that are the same as an existing occurrence in the long-term plan.
System action: If this is a Modify Current Plan dialog request, the request is rejected. If it is a request to the
program interface, the request is rejected and control is returned with the return code set to error.
User response: Change the input arrival date or time and resubmit the request.
EQQM161E MODIFY CP REQUEST FAILED, INSUFFICIENT STORAGE. REASON: RS
Explanation: A request to create or modify an occurrence in the current plan failed due to a storage allocation
failure. The reason code provides debugging information for IBM personnel.
System action: If this is a request to the program interface, the request is rejected and control is returned with the
return code set to error.
User response: If necessary, resubmit the job after the Tivoli OPC subsystem has been restarted in a larger region.
System programmer response: Allocate a larger region to the Tivoli OPC subsystem and restart the subsystem. If
the error persists, contact your IBM representative.
EQQM162W OPERATION MONUM DEFINES TOO MANY RESOURCES, FIRST MAXRES USED
Explanation: The application description record defines an operation that has more special resources than are
supported by the Create Occurrence function in the Modify Current Plan dialog.
System action: The dialog uses the maximum resources defined by the application description to initialize special
resources for this operation.
User response: Enter the OPER primary command to display operations for this occurrence. Select the operation
defined by this message and review the current definition of special resources for the operation. If required, modify
the currently defined resources, but note that no additional resources can be added for this operation.

226

Tivoli OPC Messages and Codes

EQQM163W EQQM172E

EQQM163W TWO OR MORE OPERATIONS DEFINE TOO MANY RESOURCES, FIRST MAXRES USED
Explanation: The application description record defines one or more operations that have more special resources
than are supported by the Create Occurrence function in the Modify Current Plan dialog.
System action: The dialog uses the maximum resources defined by the application description for each operation
that have too many special resources.
User response: Enter the OPER primary command to display operations for this occurrence. Review the current
definition of special resources for this occurrence. If required, modify the currently defined resources, but note that the
number of resources that can be defined per operation is limited by the maximum record length of 32,768 bytes.
EQQM164E AN OPERATION RECORD IS TOO LARGE TO BE SAVED IN CURRENT PLAN
Explanation: The current occurrence contains an operation that contains too much information to be saved in the
current plan dataset.
System action: The occurrence has not been saved. The dialog waits for you to continue updating the current
occurrence.
User response: Enter the OPER primary command to display operations for this occurrence. Review the current
definition of the operations. Try to reduce the number of special resources or dependencies, or both, defined for the
most complex operations. After making corrections, retry the Current Plan update request.
EQQM171E MAXIMUM NUMBER OF OCCURRENCES OF AD EXISTS
Explanation: No more occurrences of this application can be added. Tivoli OPC can handle approximately 870
occurrences of each application.
System action: The create request is rejected.
User response: If possible, delete occurrences of this application that have finished processing. These occurrences
are removed from the plan next time, producing a new plan. If necessary, copy the application description and add
the occurrence with a new name.
EQQM172E MAXIMUM NUMBER OF OCCURRENCES EXISTS, FAILED TO ADD AD
Explanation: No more occurrences can be added to the current plan because either the maximum number of
occurrences (32767) or the number specified in the MAXOCCNUM option of the JTOPTS statement has been
reached.
System action: The request is rejected.
Problem determination: If you use event-triggered tracking (ETT), program interface (PIF), or Automatic Recovery,
check that these functions are working correctly. For example, make sure that you do not have an endless ETT loop
where the availability of a special resource is set to YES by a job that ETT adds when it detects that this same
resource is set to YES. Check the current plan for instances of an unusually high number of occurrences of a
particular application. If you see such an application, look in the application description database and make sure that
the run cycles for the application are correct. When you specify PREVRES(YES) on the BATCHOPT initialization
statement, information about completed and deleted occurrences is carried forward, for reporting purposes, into a new
current plan. If your current plan regularly contains a large number of occurrences, and you specify YES for
PREVRES, you should consider changing this value to NO.
User response: Check that the current plan does not contain any occurrences that should not be in the plan. If you
find any such occurrences, complete or delete them. Replan the current plan to remove all completed and deleted
occurrences and try to add the occurrence again. If your current plan regularly contains a large number of
occurrences, you should consider shortening the length of the current plan in future daily planning runs.

Chapter 19. EQQMnnn Messages

227

EQQM173W EQQM208E

EQQM173W CHANGING INPUT ARRIVAL MAY CAUSE EDITED JCL TO BE LOST
Explanation: The JCL for an operation in this occurrence has been edited. Changing the input arrival for this
occurrence may cause the edited JCL to be lost.
System action: The system waits for you to respond
User response: To keep the edited JCL, change the input arrival back to the original value and press ENTER. If
you need the input arrival to change acknowledge this by pressing ENTER. This may cause the JCL that you edited
to be lost.
EQQM200E THE SPECIFIED WORK STATION ID DOES NOT EXIST
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM201E THE OPERATION NUMBER MUST BE BETWEEN 1 - 255
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM202E THE JOBNAME MUST BE IN THE FORMAT CAAAAAAA
Explanation: Data entry error; see “Data Entry Errors” on page 2.
A job name can be made up of the following valid characters: A through Z, 0 through 9, and national characters (that
is, #, $, and @). The first character must be alphabetic or national and the remaining characters can be alphabetic,
numeric, and national characters.
EQQM203E JOB SETUP, COMPUTER, AND PRINT OPERATIONS REQUIRE A JOBNAME
Explanation: A jobname must be given for an operation at a general workstation with the job setup option, or at a
computer or printer workstation.
System action: The panel is redisplayed.
User response: Specify a jobname for the operation.
EQQM204E A DURATION MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM205E NUMBER OF SERVERS MUST BE BETWEEN 1 - 99
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM206E NUMBER OF WORK STATION RESOURCES MUST BE BETWEEN 0 - 99
Explanation: Data entry error; see “Data Entry Errors” on page 2.

R
S
C
E
I

Ready
Started
Completed
Error
Interrupt

Data entry error; see “Data Entry Errors” on page 2.
EQQM208E THE STATUS CANNOT BE CHANGED - EXTERNAL SUCCESSOR STARTED
Explanation: Data entry error; see “Data Entry Errors” on page 2.

228

Tivoli OPC Messages and Codes

EQQM209E EQQM221E

EQQM209E THE VARIABLE TABLE IS NOT DEFINED TO OPC
Explanation: Data entry error; see “Data Entry Errors” on page 2.
You have tried to define a variable table ID that does not exist in Tivoli OPC's database.
EQQM210E RESOURCES WITH DUPLICATE NAMES WERE FOUND
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM211E A RESOURCE NAME MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM212E RESOURCE OPTION MUST BE S-SHARE OR X-EXCLUSIVE
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM213E OPTION FOR AUTOMATIC TRACKING MUST BE Y OR N
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM214E OPTION FOR AUTOMATIC SUBMIT MUST BE Y OR N
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM215E OPTION FOR HOLD/RELEASE MUST BE Y OR N
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM216E OPTION FOR TIME DEPENDENCY MUST BE Y OR N
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM217E OPTION FOR SUPPRESS IF LATE MUST BE Y OR N
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM218E EXTERNAL PREDECESSOR FOUND, STATUS CANNOT BE CHANGED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
You cannot change the status of an operation when an external predecessor exists in the current plan.
EQQM219E OPERATION NUMBER MUST NOT BE CHANGED FROM MOONU
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM220E DEPENDENCY TYPE MUST BE P-PREDECESSOR OR S-SUCCESSOR
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM221E NO OPERATIONS IN CURRENT PLAN MATCH THE SEARCH ARGUMENT
Explanation: In the current plan, there are no operations that meet your selection criteria.
System action: The system waits for you to respond.
User response: Check your selection criteria.

Chapter 19. EQQMnnn Messages

229

EQQM222W EQQM229E

EQQM222W UNRESOLVED EXTERNAL PREDECESSORS EXIST
Explanation: This message is issued when the Automatic Dep option is set to Y or P and the Resolve Required
option is set to Y. When the message is issued on the EQQMAOCP panel, it means that the current occurrence
could not be added to the current plan because one or more external predecessors defined by the application
description could not be resolved.
When the message is issued on the EQQMARXL panel, it means that one or more external predecessors displayed
by the panel could not be resolved. The input arrival time for unresolved dependencies is blank.
System action: The Modify Current Plan dialog waits for input.
User response: If the message is issued on the EQQMAOCP panel, enter the DEP primary command to modify
automatically added dependencies.
If the message is issued on the EQQMARXL panel, delete all unresolved predecessor dependencies.
EQQM223W OPERATION DEADLINE PRECEDES OPERATION INPUT ARRIVAL - ACCEPTED
Explanation: The operation deadline is earlier than the operation input arrival. This is accepted, but might not be
what you intend.
System action: None.
User response: None.
EQQM224W OPERATION INPUT ARRIVAL PRECEDES OCCURRENCE - ACCEPTED
Explanation: The operation input arrival date is earlier than the occurrence. This is accepted, but might not be what
you intend.
System action: None.
User response: None.
EQQM225W OPERATION DEADLINE LATER THAN OCCURRENCE DEADLINE - ACCEPTED
Explanation: The specified operation deadline is later than the occurrence deadline. This is accepted, but might not
be what you intend.
System action: None.
User response: None.
EQQM226E DEPENDENCY TYPE MUST BE P OR S
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM227W A SUCCESSOR DEPENDENCY COULD NOT BE ADDED
Explanation: A dependency to a potential successor operation could not be added because the successor operation
has already started.
System action: If this message is issued when the DEP command has been entered, unresolved successors are
indicated by a missing (blank) input arrival time. If this message is issued when trying to add an occurrence to the
plan and the RESOLVE REQUIRED indicator is Y, the occurrence is not added.
User response: If the occurrence should be added to the plan without the successor dependency, change the
RESOLVE REQUIRED indicator to N and retry the add occurrence function.
EQQM228E A DEPENDENCY TO THE OPERATION IS ALREADY DEFINED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM229E JCL BROWSE/EDIT CAN ONLY BE SELECTED FOR PROCESSOR WORK STATIONS
Explanation: Data entry error; see “Data Entry Errors” on page 2. It is not allowed to browse or edit JCL for
non-processor operations.

230

Tivoli OPC Messages and Codes

EQQM230E EQQM239E

EQQM230E HIGHEST RETURN CODE IS NOT NUMERIC
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM231E SPECIFIED OPERATION IS ALREADY A PREDECESSOR
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM232E SPECIFIED OPERATION IS ALREADY A SUCCESSOR
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM233I THE SPECIFIED OPERATION HAS BEEN ADDED AS A PREDECESSOR
Explanation: The specified operation has been added as a predecessor.
System action: None.
User response: None.
EQQM234I THE SPECIFIED OPERATION HAS BEEN ADDED AS A SUCCESSOR
Explanation: The specified operation has been added as successor.
System action: None.
User response: None.
EQQM235E THE SPECIFIED OPTION MUST BE EITHER Y, N, OR BLANK
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The value of this input field must be Y (for Yes), N (for No), or a blank (for no value). Read the help text for the
panel, and decide which option you want.
EQQM236E VARIABLE TABLE NAME CONTAINS AN INVALID CHARACTER
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM237E OPTION FOR DEADLINE WTO MUST BE Y OR N
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The option can be Y (yes) or N (no).
EQQM238E YOU ARE NOT AUTHORIZED TO READ THE JCL VARIABLE TABLE DATA BASE
Explanation: You have attempted to access a JCL variable table. To do this, you need at least read authority to the
JCL variable table database.
System action: The system waits for you to respond.
User response: Contact your security administrator if you need to refer to JCL variable table names.
EQQM239E MULTIPLE RESTART POINTS ARE NOT ALLOWED, DUE TO EXTERNAL DEPENDENCIES
Explanation: You selected more than one restart point in the application occurrence being rerun. You cannot use
multiple restart points because the occurrence has external dependencies that would be updated by the rerun.
If you want to use more than one restart point, the application occurrence being rerun must be the only occurrence
whose status changes.
System action: The first restart point that you selected is accepted. All other restart points are cancelled.
User response: If you want to rerun the application occurrence starting from the first restart point, enter Y on the
Rerun Confirmation panel. Otherwise, enter N.

Chapter 19. EQQMnnn Messages

231

EQQM240E EQQM246E

EQQM240E THE OPERATION SELECTED AS RESTART POINT HAS PENDING PREDECESSORS
Explanation: The operation that you selected as a restart point has at least one predecessor that is pending (not in
the current plan).
Pending predecessors are marked with \P\ in the predecessor type column at the far right of the panel.
System action: The occurrence status is not changed to rerun, but updates made to the JCL are saved.
User response: Select another restart point in the application occurrence, or delete the pending dependencies. Run
the occurrence again.
EQQM241I THE OCCURRENCE STATUS HAS NOT BEEN CHANGED
Explanation: The occurrence status has not set to rerun because:
1. The operation that you selected as a restart point has at least one predecessor that is pending (not in the current
plan). The status cannot be set to rerun until you delete the pending dependencies.
2. You entered the cancel command on the EQQMOSTL panel.
System action: The occurrence status is not changed to rerun, but updates made to the JCL are saved.
User response: None.
EQQM242E THE NUMBER OF PARALLEL SERVERS MUST BE 1 FOR CPU OPERATIONS
Explanation: Operations on a computer workstation can only use one parallel server.
System action: The panel is redisplayed and the dialog waits for you to change the number of parallel servers.
User response: Change the number of parallel servers to 1.

| EQQM243I THE CATALOG MANAGEMENT ACTION FOR THIS OPERATION HAS BEEN DISCARDED
| Explanation: Changing status from error to complete indicates that no catalog management is needed, if the
| operation had the catalog management attribute set to deferred.
| System action: The action is flagged as discarded for the operation.
| User response: None.
| EQQM244I THE CATALOG MANAGEMENT ACTION HAS ALREADY STARTED FOR THIS OPERATION
| Explanation: The catalog management action had already started when this status change was done. The action
| continues until finished.
| System action: The catalog management action continues until complete, and the action statuses are set
| accordingly. The operation's status is not changed.
| User response: Try again later.
EQQM245W THE CATALOG MANAGEMENT ACTION HAS STARTED FOR THIS OPERATION
Explanation: When trying to start an auto recovery action, Tivoli OPC found that there is a catalog management
action in progress.
System action: The automatic recovery request is ignored.
User response: Try again later.
EQQM246E DEPENDENT OCC NOT FOUND
Explanation: The dependent occurrence OCC was not found in the current plan.
User response: Add new predecessor/successor occurrences to the current plan.

232

Tivoli OPC Messages and Codes

EQQM250E EQQM257I

EQQM250E CURRENT OPERATION STATUS MUST BE A, *, R, W, C, OR E TO BE HELD
Explanation: Only operations in status A, W, R, *, C, or E can be manually held.
System action: The request is ignored.
User response: None.
EQQM251I OPERATION IS ALREADY MANUALLY HELD BY DIALOG
Explanation: The operation has already been set to MANUAL HOLD by an Tivoli OPC dialog user.
System action: The request is ignored.
User response: None.
EQQM252I OPERATION IS NOT MANUALLY HELD BY DIALOG
Explanation: The operation for which the MANUAL RELEASE command was issued, is not Manually HELD by a
Tivoli OPC dialog user request.
System action: The request is ignored.
User response: None.
EQQM253I OPERATION IS PUT IN MANUAL HOLD
Explanation: The operation for which the manual HOLD command was issued is now recognized to be HELD by
Tivoli OPC.
System action: The operation is manually HELD.
User response: None.
EQQM254I OPERATION HAS BEEN MANUALLY RELEASED FROM MANUAL HOLD
Explanation: A previously held operation has been release from hold at an Tivoli OPC dialog user's request.
System action: The operation is released, and may be scheduled by Tivoli OPC.
User response: None.
EQQM255E CURRENT OPERATION STATUS MUST BE A, *, W, C, OR R TO BE NOPED
Explanation: Only operations in status A, W, R, C, or * can be NOPed.
System action: The request is ignored.
User response: None.
EQQM256I OPERATION IS ALREADY NOPED BY USER REQUEST
Explanation: The operation for which the NOP command was issued has already been NOPed by a dialog request.
System action: The request is ignored.
User response: None.
EQQM257I OPERATION IS NOT NOPED
Explanation: The operation for which the UN-NOP command was issued, is not currently NOP.
System action: The request is ignored.
User response: None.

Chapter 19. EQQMnnn Messages

233

EQQM258I EQQM265E

EQQM258I OPERATION HAS BEEN NOPED
Explanation: The operation has been recognized as no-oped by Tivoli OPC The operation is not executed, and
dependent operations may be started as a result.
System action: The operation is indicated as no-oped.
User response: None.
EQQM259I OPERATION NOP HAS BEEN RESET
Explanation: An operation has been successfully reset from its NOP indication at an Tivoli OPC dialog user's
request.
System action: The operation's NOP indication is removed.
User response: None.
EQQM260I OPERATION HAS BEEN EXECUTE INDICATED
Explanation: An operation has been marked as EXECUTE by Tivoli OPC and is started without regard to the normal
job submission criteria.
System action: Processing continues.
User response: None.
EQQM261E CURRENT OPERATION STATUS MUST BE A, *, OR R TO BE EXECUTED
Explanation: Only operations in status A, R or * can be the subject of an EXECUTE request.
System action: The request is ignored.
EQQM262E YOU DO NOT HAVE AUTHORITY TO USE THE EXECUTE COMMAND
Explanation: To use the function you selected, you must have update authority to the EXECUTE resource.
System action: The request is rejected and the system waits for you to respond.
User response: Contact your security administrator if you need to use the EXECUTE command.
EQQM263E COMMAND VALID ONLY ON COMPUTER AUTOMATIC WORKSTATIONS
Explanation: The workstation on which this operation was scheduled is not a computer type workstation with the
automatic reporting attribute.
System action: The request is ignored.
User response: Issue the command only on computer workstations with the automatic reporting attribute.
EQQM264E THE COMMAND THAT WAS ISSUED IS NOT SUPPORTED
Explanation: The command is not supported by Tivoli OPC.
System action: The request is ignored.
User response: Issue only valid Tivoli OPC commands.
EQQM265E COMMAND SUPPORTED ON AUTOMATIC CPU OR NONREPORTING WORKSTATIONS
Explanation: The command you issued is supported on automatic computer type workstations, or workstations with
the nonreporting attribute.
System action: The request is ignored.
User response: Issue the command only on supported workstations.

234

Tivoli OPC Messages and Codes

EQQM266E EQQM313E

EQQM266E THERE IS NO ACTIVE WORKSTATION FOR THIS OPERATION
Explanation: The operation is scheduled on a workstation that is inactive. If alternative workstations are specified,
these are also inactive.
System action: The request is ignored.
User response: Issue the EXECUTE command when the workstation, or an alternative workstation, becomes active
again.
EQQM267E STATUS CANNOT BE CHANGED AS THE OPERATION HAS BEEN MANUALLY HELD
Explanation: You cannot request Tivoli OPC to set the next logical status for an operation that has been manually
held.
System action: The request is ignored.
User response: Either set a specific status using the N–x row command, or manually release the operation (MR)
and reissue the N row command.
EQQM301I WORK STATION UPDATED IN CURRENT PLAN
Explanation: The workstation has been updated in the current plan.
System action: The modify workstation function is terminated.
User response: None.
EQQM302W A WORK STATION IS CURRENTLY BEING UPDATED, TRY LATER
Explanation: You have attempted to modify a workstation, but it is currently being updated by another user.
System action: The system waits for you to respond.
User response: Try again later.
EQQM303E THE REPORTING ATTRIBUTE SPECIFIED MUST BE A, S, C, OR N
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM304E CONTROL ON SERVERS OR RESOURCES MUST BE Y-YES OR N-NO
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM310E OPEN TIME INTERVALS MUST NOT OVERLAP
Explanation: Data entry error; see “Data Entry Errors” on page 2.
It is not allowed to have overlapping open time intervals for the workstation.
EQQM311E INTERVAL START MUST PRECEDE END
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The open interval start time must be earlier than the open interval end time.
EQQM312E START TIME MUST BE SPECIFIED FOR AN INTERVAL
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM313E END TIME MUST BE SPECIFIED FOR AN INTERVAL
Explanation: Data entry error; see “Data Entry Errors” on page 2.

Chapter 19. EQQMnnn Messages

235

EQQM314E EQQM322E

EQQM314E VALUE FOR PARALLEL SERVERS MUST BE 0 - 99
Explanation: Data entry error; see “Data Entry Errors” on page 2.

| EQQM315I TABLE RESULT IS MERGED FROM MODIFIED AND PLANNED INTERVALS
Explanation: The table result is merged from modified and planned intervals. The table is built from the modified
and planned intervals according to the workstation.
System action: Processing continues.
User response: If you want the displayed table to be used, use the END command. Press ENTER to display the
table without this message.

| EQQM316I FLUSHED/PREVIOUS STEP REFERRED DATA SETS CHECKED
Explanation: The job for which the catalog management action has been invoked, contains no SYSOUT information,
so that only a job level restart is possible. The job level restart does not require any action on the JOB datasets.
However, some datasets (those in flushed steps or those allocated in the job but referenced in previous steps) need to
be checked and removed from the current plan before a rerun can be performed. Otherwise, the message
EQQM323W CATALOG MANAGEMENT IS PENDING FOR THE CURRENT OPERATION is displayed.
System action: Processing continues.
User response: Make sure that the necessary datasets are discarded from the current plan.
EQQM320W DATASET AND JOBLOG INFORMATION ARE BOTH MISSING
Explanation: Information about datasets defined in the JCL and JES joblogs has not been passed back to the
controller. As a result, no catalog management action is possible. Possible reasons for this messageare:

CATMGT(NO) was specified, or defaulted, in the OPCOPTS initialization statement when the operation started
The catalog management indicator for the operation is N N
Dataset information for the operation has been filtered by EQQUX004
The job or started task did not alter the catalog status of any DD-defined dataset.

System action: Processing continues.
User response: None.
EQQM321I THE CATALOG MANAGEMENT PROCESS HAS ALREADY BEEN STARTED
Explanation: You have tried to initiate the catalog management process for the current operation. The process has
already been started by Tivoli OPC and cannot be restarted.
System action: The request is ignored.
User response: None.
EQQM322E OPC CANNOT INITIATE THE CATALOG MANAGEMENT FUNCTION
Explanation: You have tried to initiate catalog management for the current operation, but the process cannot start.
This is because either Tivoli OPC has no contact with the tracker or the catalog management subtask is not active at
the controller.
System action: No catalog management action is initiated for this operation
User response: Contact your system programmer.
System programmer response: Check whether the tracker at the destination defined for the current workstation is
operational or not. If it is not, retry the process when it becomes available again. Make sure that CATMGT(YES) is
specified on the OPCOPTS initialization statement of the controller, and that the controller, or catalog management
subtask, has been restarted since CATMGT(YES) was specified. Also check that the catalog management subtask
has not been stopped by an MVS modify command, or ended because of an error, after Tivoli OPC was started. If
the problem persists, contact your IBM representative.

236

Tivoli OPC Messages and Codes

EQQM323W EQQM330I

EQQM323W CATALOG MANAGEMENT IS PENDING FOR THE CURRENT OPERATION
Explanation: You have tried to perform automatic recovery for this operation when there is a deferred catalog
management action defined for this operation.
System action: The system waits for you to respond.
User response: Make sure that the action is either performed or discarded before you try to perform automatic
recovery for the operation.
EQQM324E CATALOG MANAGEMENT IS IN PROGRESS FOR OPER OP IN APPL AD.
Explanation: You have tried to restart an operation or rerun an occurrence when there is a catalog management
action in progress.
System action: The request is ignored.
User response: Make sure that the action has ended before you try to perform a rerun or restart.
EQQM325I OPC HAS BEEN REQUESTED TO START THE CATALOG MANAGEMENT ACTIONS
Explanation: Tivoli OPC has started catalog management actions for the current operation.
System action: The catalog management action is taken for the current operation.
User response: None.
EQQM326I THE REQUEST TO DISCARD THE CATALOG MANAGEMENT HAS BEEN CANCELLED
Explanation: The Discard request has been canceled by you. No datasets have been deleted from the list of
datasets.
System action: None.
User response: None.
EQQM327I THE CATALOG MANAGEMENT ACTION FOR THIS OPERATION IS DISCARDED
Explanation: The Discard request has been accepted and the catalog management status is set to D (discarded).
System action: The catalog management status is changed to D.
User response: None.
EQQM328E A VALID RESPONSE IS EITHER Y OR N
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQM329I THE STATUS OF THE CATALOG MANAGEMENT ACTION HAS NOT BEEN DETERMINED
Explanation: The catalog management process has not yet ended. Therefore the status of the datasets is not fully
updated.
System action: Processing continues.
User response: Status for all datasets is available when the catalog management action has ended.
EQQM330I THE CATALOG MANAGEMENT ACTION FOR THE OPERATION HAS BEEN DISCARDED
Explanation: You have verified a Discard command for catalog management. Therefore the catalog management
action has been set to D (discarded) in Tivoli OPC's plan and no catalog management is performed for this operation.
System action: The catalog management action is discarded.
User response: None.

Chapter 19. EQQMnnn Messages

237

EQQM331E EQQM337E

EQQM331E THE ONLY VALID VALUES ARE OCHCDFR ,OCHCYES OR OCHCNO
Explanation: You have entered an incorrect action for the catalog management function.
System action: The system waits for you to respond.
User response: Enter the correct value and press ENTER.
EQQM332I THE CATALOG MANAGEMENT FUNCTION IS NO LONGER ACTIVE
Explanation: The catalog management function has been deactivated after the time that information from the dataset
was collected for this operation.
System action: The catalog management action is ignored.
User response: Contact your system programmer.
System programmer response: If you want the catalog management function to be activated, change the
OPCOPTS keyword CATMGT to YES and restart the controller.
EQQM333W OPC INITIALLY FOUND INCONSISTENCIES IN THE JCL
Explanation: When Tivoli OPC initially checked the JCL, inconsistencies were found.
System action: The system waits for you to respond
User response: Enter Yes to accept the step-level restart selected or enter No to reject the restart setting.
EQQM334I MORE THAN ONE STEP WITH SAME PROCSTEP/STEPNAME
Explanation: The selected stepname or proc stepname, or both, occurs more than once in the JCL.
System action: Tivoli OPC chooses the first occurrence of the selected step name and uses it as the restart step.
User response: None.
EQQM335E OPC CAN NOT TAILOR ANY JCL BECAUSE NO RESTART STEP WAS SELECTED
Explanation: To tailor the JCL for step restart, Tivoli OPC needs a step selection.
System action: The system waits for you to respond.
User response: Select a step or cancel the step restart.
EQQM336I THE RESTART HAS BEEN CANCELLED FOR THIS OPERATION
Explanation: If the cancel was for a step restart, the JCL for this operation has not been stored in the JS repository
file, because no step selection was made.
System action: None.
User response: None.
EQQM337E NO STEPS WERE SELECTED FOR RESTART
Explanation: You have excluded all steps for the job, so the JCL cannot be created.
System action: The system waits for you to respond.
User response: Make sure that a minimum of one step is selected for the job and reissue the GO command.

238

Tivoli OPC Messages and Codes

EQQM338I EQQM343E

EQQM338I OPC HAS FOUND NO INCONSISTENCIES IN THE JCL FOR A RESTART
Explanation: Tivoli OPC has investigated the JCL for restart and has found no errors. The operation may be
restarted.
System action: None.
User response: Leave the panel with the END command to save the JCL and initiate catalog management actions
for the operation, and cancel the restart using the CANCEL command.
EQQM339W THE OPERATION CANNOT BE RESTARTED WITHOUT CHANGING THE JCL
Explanation: Tivoli OPC has investigated the JCL for restart and has detected inconsistencies. Tivoli OPC detects
many situations that can cause problems during the step restart, for example, missing instream data or references to a
temporary dataset created prior to the restart step.
System action: The JCL is displayed. ISPF message lines are inserted by Tivoli OPC to document the detected
inconsistencies.
User response: Change the JCL, or cancel the restart for this operation, or save the JCL after determining that the
reported inconsistencies are not expected to result in a problem during restart.
EQQM340E OCCURRENCE IN A GROUP MUST BE REMOVED BEFORE IT CAN BE DELETED
Explanation: An occurrence that belongs to an occurrence group cannot be deleted.
System action: The system waits for you to respond.
User response: You must remove the occurrence before you can delete it. To do this, type the row command RG
on the MODIFYING OCCURRENCES IN THE CURRENT PLAN panel or the HANDLING OPERATIONS ENDED IN ERROR
panel. Alternatively, erase the group definition ID field on the MODIFYING AN OCCURRENCE IN THE CURRENT PLAN
panel.
EQQM341E OCCURRENCE IN A GROUP MUST BE REMOVED BEFORE IT CAN BE COMPLETED
Explanation: An occurrence that belongs to an occurrence group cannot be completed.
System action: The system waits for you to respond.
User response: You must remove the occurrence before you can complete it. To do this, type the row command
RG on the MODIFYING OCCURRENCES IN THE CURRENT PLAN panel or the HANDLING OPERATIONS ENDED IN ERROR
panel. Alternatively, erase the group definition ID field on the MODIFYING AN OCCURRENCE IN THE CURRENT PLAN
panel.
This message can also be issued when you try to complete the last uncompleted operation of an occurrence
belonging to a group. It is issued because the completion of an operation would imply the completion of the
occurrence. However, Tivoli OPC does not allow manual completion of this kind of occurrence before the occurrence
has been removed from the group.
EQQM342E OCCURRENCE IS NOT A MEMBER OF AN OCCURRENCE GROUP
Explanation: The occurrence does not belong to an occurrence group.
System action: The request is rejected.
User response: None.
EQQM343E APPLICATION IS NOT A MEMBER OF AN APPLICATION GROUP
Explanation: The application does not belong to an application group.
System action: The request is rejected.
User response: None.

Chapter 19. EQQMnnn Messages

239

EQQM344W EQQM350I

EQQM344W APPLICATION IS A MEMBER OF A GROUP. CONSIDER ADDING THE OTHER MEMBERS
Explanation: The application is a member of an application group. This message is issued as a reminder in case
you should also add the other members of the same group to the current plan.
System action: Normal processing continues.
User response: If applicable, create occurrences in the current plan for the other applications in the same group.
EQQM345E ONE OR MORE OCCURRENCES ARE IN USE
Explanation: One or more of the applications could not be added because another user is adding the same
application to the current plan with the same input arrival date and time. InUse is displayed in the list to indicate the
failing occurrence.
System action: The system waits for you to respond.
User response: Check that Group ID and Input arrival date and time have been specified correctly. Or, check with
the other user who is creating the same occurrence to determine which of the occurrences should be added.
Alternatively, use the row command D to delete the occurrence from the list.
EQQM346E ONE OR MORE OCCURRENCES ALREADY EXISTS
Explanation: One or more of the applications could not be added because an occurrence for the same application
already exists in the current plan. Exist is displayed in the list to indicate the failing occurrence.
System action: The system waits for you to respond.
User response: Check that Group ID and Input arrival date and time have been specified correctly. Use the row
command D to delete the occurrence from the list. Alternatively, use the Modify Current Plan dialog to delete the
previously added occurrence from the current plan.
EQQM347E INSUFFICIENT AUTHORITY TO ADD ONE OR MORE APPLICATIONS
Explanation: One or more of the applications could not be added because you do not have current plan update
authority for the application names. NoAuth is displayed in the list to indicate the failing occurrence.
System action: The system waits for you to respond.
User response: Verify that Group ID has been specified correctly. Alternatively, use the row command to delete the
occurrence from the list.

| EQQM348E INSUFFICIENT AUTHORITY TO DO CATALOG MANAGEMENT ACTIONS
| Explanation: It is not possible to do catalog management actions because you do not have CMAC Update authority
| for performing them.
| System action: The system waits for you to respond.
| User response: Check if the CMAC fixed resource is defined and which type of authorization you assigned to
| CMAC.
EQQM349E NO OCCURRENCES TO ADD, OR TERMINATING ERRORS FOUND
Explanation: Either there are no valid versions of any applications in the application description database for the
date and time specified by the input arrival or Tivoli OPC has been unable to execute the request.
System action: The system waits for you to respond.
User response: Check that Group ID and Input arrival date and time have been specified correctly.
EQQM350I ALL ADDED OCCURRENCES HAS BEEN SUCCESSFULLY RELEASED
Explanation: All occurrences in the group have been successfully released.
System action: The occurrences have been released.
User response: None.

240

Tivoli OPC Messages and Codes

EQQM351I EQQM356E

EQQM351I ALL ADDED OCCURRENCES HAS BEEN SUCCESSFULLY DELETED
Explanation: The occurrences in the group have been successfully deleted from the current plan.
System action: The occurrences have been deleted from the current plan.
User response: None.
EQQM352E SOME ADDED OCCURRENCES COULD NOT BE RELEASED
Explanation: One or more of the applications added to the plan could not be released. Error is displayed in the list
to indicate the failing occurrence.
System action: The system waits for you to respond.
User response: See the message log for possible error information. Use the row command D to delete the
occurrence from the list.
EQQM353E SOME ADDED OCCURRENCES COULD NOT BE DELETED
Explanation: One or more of the applications added to the plan could not be deleted from the current plan. Error is
displayed in the list to indicate the failing occurrence.
System action: The system waits for you to respond.
User response: See the message log for possible error information. Use the row command D to delete the
occurrence from the list.
EQQM354I ALL SELECTED OCCURRENCES HAS BEEN SUCCESSFULLY ADDED
Explanation: All occurrences in the group have been successfully added to the current plan. The occurrences are
held until you release them.
System action: Processing continues.
User response: Modify the individual occurrences as required and release the group.
EQQM355E SOME SELECTED OCCURRENCES COULD NOT BE ADDED
Explanation: One or more of the occurrences defined in the group could not be added to the current plan. This can
happen because Tivoli OPC was unable to resolve the dependencies for the application.
System action: The occurrence group is added to the current plan, but not all of the occurrences were added.
Problem determination: The message log contains messages that describe the reason why the individual
occurrences could not be added.
User response: Add the individual occurrences to the plan as members of the existing group. Alternatively, delete
the entire occurrence group before the occurrences are released.
EQQM356E GROUP VALID-FROM DATE IS LATER THAN PLAN END MPLENDI
Explanation: The valid-from date of the group that you attempted to add to the current plan lies outside the current
plan end.
System action: The request is rejected.
User response: Use the Application Description dialog to change the valid-from date of the group definition.

Chapter 19. EQQMnnn Messages

241

EQQM357E EQQM365E

EQQM357E NO VALID GROUP DEFINITION AVAILABLE
Explanation: You attempted to add a group of applications to the current plan, but no valid version of the
corresponding group definition could be found.
Possible reasons for this error are:
The group definition has been deleted from the application description database
You do not have security access to read the group definition
An active group definition is not in effect for the specified input arrival date.
System action: The system waits for you to respond.
User response: Check why the group definition could not be found, correct the error and resubmit the request.
EQQM358W DEP LOOP DETECTED, NOT ALL DEPS RESOLVED WITHIN THE GROUP
Explanation: One or more dependency loops has been found in the occurrence group.
System action: In each loop, the external dependencies for one of the operations has not fully been resolved within
the group. If there are other occurrences, external to the group, in the current plan that matches these dependency
definitions, the dependencies have been resolved to those occurrences. Message EQQM976W is written to the
message log, once for each loop detected.
User response: Check the message log to identify the occurrences and the affected operations.
EQQM360W WHEN OPC CHECKED THE JCL IT FOUND JES3 DJC STATEMENTS
Explanation: Restarting this job may interfere with the JES3 dependent job control net.
System action: None.
User response: Verify that the restart does not affect the DJC net or change the JCL accordingly, or both.
EQQM361I STATEMENT OVERRIDDEN DUE TO CONFLICT WITH ORIGINAL JCL
Explanation: The statement in the JCL has been modified by Tivoli OPC so that a replacement JCL statement could
be inserted. The original statement is changed to a JCL comment.
System action: Processing continues.
User response: Verify that the step restart selected is correct.
EQQM362E OPC DIDN'T INSERT COND AS ONE IS ALREADY PRESENT
Explanation: Restarting this operation is not possible due to a previously defined COND statement.
System action: None.
User response: Verify that the existing COND statements are valid and amend the JCL accordingly.
EQQM364W A STEP LEVEL RESTART HAS ALREADY BEEN SELECTED FOR THE OPERATION
Explanation: A step-level restart has already been set for this operation and the operation has not yet been
restarted.
System action: Processing continues.
User response: Verify the step-level restart that was previously selected. Change it if necessary.
EQQM365E THE STATEMENT CONTAINS REFER BACK TO STEP PRIOR TO RESTART
Explanation: Restarting this job is not possible due to a refer back specifying a step that is prior to a restart step.
This would cause a JCL error.
System action: None.
User response: Verify that the step from which to restart is correct and amend the JCL accordingly.

242

Tivoli OPC Messages and Codes

EQQM366I EQQM373W

EQQM366I STATEMENT FOLLOWS FROM STEP STEPNAME PROC STEP PROCNAME
Explanation: The inconsistency is highlighted by placing the JCL in ISPF note lines that are then preceded with the
procname and stepname where the JCL statements were found.
System action: None.
User response: Verify that the highlighted data is in error and amend the JCL accordingly.
EQQM368E IF STATEMENT REFERS BACK TO STEP PRIOR TO RESTART STEP
Explanation: Restarting this job could result in unpredictable results as the IF statement refers to a step prior to a
restart step. This is a JCL error.
System action: None.
User response: Verify that the step being referred to is correct and amend the JCL accordingly.
EQQM369E UNABLE TO OVERRIDE JCL AS IT IS IN A NESTED PROCEDURE
Explanation: Restarting this job is not possible as the JCL statement that needs to be overridden is within a nested
procedure.
System action: None.
User response: Update the procedure manually for the duration of this job.
EQQM370W THE JOBLOG FOR THIS OPERATION IS NOT COMPLETE
Explanation: The JESJCL and JESYSMSG joblog files are needed to define a step-level restart. One or both of
these files are missing and Tivoli OPC cannot rebuild the JCL for step-level restart.
System action: None.
User response: Use the JOB primary command to view the part of the joblog that is present (if any) and use the J
row command in the Previous Operation list panel to update the JCL accordingly.
EQQM371W THE STATEMENT CONTAINS A DATASET WITH DISPOSITION MOD
Explanation: The JCL statement contains a DISP=MOD for a dataset. This restart may corrupt the contents of this
dataset.
System action: None.
User response: Verify if the step was executed or not. If it was not, ignore this message. If it was executed, verify
that a restart is possible or change the JCL accordingly.
EQQM372E THE STATEMENT CONTAINS A REFERENCE TO A TEMPORARY DATASET
Explanation: The JCL statement contains a reference to a temporary name of a dataset that was created in a
previous step. Restarting this job would cause a JCL error.
System action: None.
User response: Change the JCL accordingly.
EQQM373W STEP STATUS IS FLUSH. POSSIBLE INCONSISTENCIES EXIST
Explanation: This step has a status of FLUSH due to a prior error. Restarting from this step may be possible.
However, verification of the JCL for the status of datasets is recommended.
System action: None.
User response: Change the JCL if necessary.

Chapter 19. EQQMnnn Messages

243

EQQM374W EQQM379W

EQQM374W STEP EXECUTION CONDITION TO A PREVIOUS STEP
Explanation: The JCL statement contains a condition statement that refers to a previous step. Restarting this job
could cause steps to be executed that are not supposed to be executed.
System action: None.
User response: If necessary, change the COND/IF keyword accordingly. Change AUTOSAVED as 100003
AUTOSAVE A1
EQQM3375I OPC WILL ATTEMPT TO DELETE THIS DATASET
Explanation: Tivoli OPC attempts to delete this dataset before this job is restarted.
System action: None.
User response: None.
EQQM376I OPC WILL ATTEMPT TO UNCATALOG THIS DATASET
Explanation: Tivoli OPC attempts to uncatalog this dataset before this job is restarted.
System action: None.
User response: None.
EQQM377I OPC WILL ATTEMPT TO CATALOG THIS DATASET
Explanation: Tivoli OPC attempts to catalog this dataset before this job is restarted.
System action: None.
User response: None.
EQQM378W VERIFY JCL: OPC COULD DELETE WRONG DATASET (IEF377I)
Explanation: The JCL statement contains a DCB reference to a name in a dataset that has been referenced by an
IEF377I message in the joblog. Restarting the job may cause problems as Tivoli OPC deletes only the cataloged
datasets and not those that have just been allocated and not cataloged.
System action: None.
User response: Change if this could lead to problems, and, if so, remove the involved datasets from the dataset list
suggested by Tivoli OPC for deletion. If necessary, manually make any required changes or alter the JCL.
EQQM379W THE JCL STATEMENTS CONTAIN AUTOMATIC RECOVERY STATEMENTS
Explanation: Tivoli OPC has found automatic recovery statements in the JCL. Restarting the job without changing
or removing the automatic recovery statements may lead to unpredictable results.
System action: None.
User response: Verify the Tivoli OPC automatic recovery statements. If necessary, remove them.

244

Tivoli OPC Messages and Codes

EQQM380W EQQM385E

EQQM380W JCL CONTAINS REFERENCES TO INSTREAM DATA THAT IS MISSING
Explanation: The JCL statement contains a reference to instream data that cannot be located. Possible reasons for
this error are:
An error was reported when Tivoli OPC submitted the operation that prevented the JCL from being stored in the
JCL repository.
The JCL for this operation has been deleted from the JCL repository.
The operation was not submitted by Tivoli OPC and the corresponding data is not available in the JES job log.
The data is missing from one of the following: a DD * or DD DATA reference, a JES XMIT or DATASET
statement, or a PASSWORD= keyword on the job card.
System action: Processing continues.
User response: Enter any required instream data.
EQQM381I OPC HAS FOUND NO INCONSISTENCIES IN THE JCL FOR A RESTART
Explanation: Tivoli OPC has investigated the JCL for restart and has found no errors. The operation can be
restarted.
System action: None.
User response: Leave the panel with the END command to save the JCL and initiate catalog management for the
operation, cancel the restart using the CANCEL command, or edit the JCL using the JCL primary command.
EQQM382W THE OPERATION CANNOT BE RESTARTED WITHOUT CHANGING THE JCL
Explanation: Tivoli OPC has investigated the JCL for restart and has found errors. Use the JCL primary to
determine whether JCL updates are required.
System action: The system waits for you to respond.
User response: Either edit and change the JCL or cancel the restart of the operation.
EQQM383E THE ABSOLUTE GDG NUMBER IS MISSING FOR THIS DATASET
Explanation: Tivoli OPC was unable to find the absolute GDG number for the dataset.
System action: None.
User response: Check to ensure that the GDG base exists and that the GDG level has not been deleted or that the
dataset has not been filtered out by a user exit.
EQQM384W THE RESTART STEP IS INSIDE AN IF/THEN/ELSE CLAUSE
Explanation: Unpredictable results may occur when the selected restart step is within an IF-THEN-ELSE clause.
System action: None.
User response: Check to ensure that the step selected is the correct step and that the IF-THEN-ELSE clause is
understood.
EQQM385E NUMBER OF STEPS FOUND IN THE JOB LOG INCONSISTENT
Explanation: The number of steps found in the job log is not consistent with the number of steps reported by the
tracker when the job ended.
System action: Processing continues.
User response: Contact your system programmer.
System programmer response: Keep a copy of the event dataset from the tracker where the job executed, the
current plan, and the JCL repository, and contact your IBM representative.

Chapter 19. EQQMnnn Messages

245

EQQM386W EQQM391I

EQQM386W THE GDG BASE IS MISSING FOR THIS DATASET
Explanation: Tivoli OPC was unable to find the GDG base for the dataset at job submit time.
System action: None.
User response: Check that the GDG name is specified correctly. The GDG may be created during the life time of
the job so this may not be an error.
EQQM387W CM ACTION FOR THIS JOB IS OCHCNO SO GDG CANNOT BE RESOLVED
Explanation: The job to be rerun contains GDG datasets, but catalog management action for the operation is none.
The absolute GDG value is missing, therefore missing and the GDG dataset cannot be resolved.
System action: The JCL is presented with the specification of the GDG dataset unchanged.
User response: Change the DD statement manually. When using step-level restart for operations containing GDG
datasets the catalog management action should be set to D or Y (D is recommended).
EQQM388W VERIFY JCL FOR POSSIBLE INCONSISTENCIES
Explanation: One of the following situations has occurred:
At least one step staus of FLUSH was detected. Restarting from this step may be possible. However, verification
for the status of datasets used in this step is recommended.
At least one IEF377I message was found in the job log. This means that in the previous run the job successfully
allocated the dataset, but did not manage to catalog it.
System action: None.
System programmer response: If necessary, change the JCL. If flushed steps have been detected, message
EQQM373W indicates which ones they are. If there are catalog problems, message EQQM378W indicates which
datasets are involved. See the description for EQQM378W for details on what action should be taken.
EQQM390I OPC NEEDS A JOBLOG TO PROCESS THE COMMAND. IT HAS BEEN REQUESTED
Explanation: You have tried to make a catalog management request or browse-joblog request on a Tivoli OPC
subsystem activated for step-level restart and where the needed job logs are retrieved at the time of your request.
Tivoli OPC has requested the tracker to retrieve the job log.
System action: The panel is redisplayed with this information message.
User response: Wait for the request to complete. Check the joblog-retrieval Status field or wait to get a
TSO-broadcast that the request has Completed. Reenter your dialog request.
System programmer response: None.
EQQM391I A JOBLOG IS NEEDED TO PROCESS THE COMMAND. IT IS NOT YET RETRIEVED
Explanation: You have tried to make a catalog management request or browse-joblog request on a Tivoli OPC
subsystem activated for step-level restart and where the required job logs are retrieved at the time of your request.
Tivoli OPC has initiated a request to the tracker to retrieve the job log, but the request has not yet been processed.
System action: The panel is redisplayed with this information message.
User response: Wait for the request to complete. Check the joblog-retrieval Status field or wait to get a
TSO-broadcast that the request has Completed. Reenter your dialog request.
System programmer response: None.

246

Tivoli OPC Messages and Codes

EQQM392E EQQM396E

EQQM392E A JOBLOG IS NEEDED TO PROCESS THE COMMAND. COULD NOT BE RETRIEVED
Explanation: You have tried to make a catalog management request or browse-joblog request on a Tivoli OPC
subsystem activated for step-level restart and where the required job logs are retrieved at the time of your request.
Tivoli OPC has initiated a request to the tracker, but has received an error return code from the tracker attempting
retrieval of the job log.
System action: If you requested catalog management actions or Restart and Tivoli OPC has collected dataset
information, the Dataset list panel is displayed with this error message, instead of the expected Step list panel. If you
requested browse-joblog nothing is displayed.
User response: Tivoli OPC cannot perform step-level restart for this job and you cannot browse the job log. Contact
your system programmer to find out why the job log could not be retrieved.
System programmer response: The Tivoli OPC tracker has not been able to retrieve the SYSOUT for this job. The
tracker tries to retrieve it either by reading held SYSOUT or by calling the joblog-retrieval user exit. Check the value
of the JOBLOGRETRIEVAL keyword. There are messages in the tracker message log, EQQMLOG, that help to
further diagnose the problem.
EQQM393E CATALOG MANAGEMENT IS ONLY ALLOWED FOR OPERATIONS RUNNING ON MVS
Explanation: You have tried to make a catalog management step-level restart request, a job log has been found but
the job log is created on a non-MVS platform.
System action: The panel is redisplayed with this error message.
User response: You cannot perform catalog management for this job. Use browse-joblog command to browse the
job log or edit the data in the JS-file ("JCL Edit") and resubmit the job to the non-MVS platform.
EQQM394E SELECTED END-STEP MUST BE AFTER SELECTED START-STEP
Explanation: You have tried to make a catalog management step-level restart request with a restart scope that is a
start-step plus end-step for the restart. This is not allowed.
System action: The panel is redisplayed with this error message.
User response: Correct your definition, that is either specify a new end-step that lies after the start-step or remove
the end-step line-command.
EQQM395E A JOBLOG IS NEEDED TO PROCESS THE COMMAND BUT WAS NOT FOUND
Explanation: You have tried to make a catalog management request or browse-joblog request on a Tivoli OPC
subsystem activated for step-level restart. A job log could not be located for the operation.
System action: If you requested catalog management actions or Restart and Tivoli OPC has collected dataset
information, the Dataset list panel is displayed with this error message, instead of the expected Step list panel. If you
requested browse-joblog nothing is displayed.
User response: Tivoli OPC cannot perform step-level restart for this job and you cannot browse the job log. Contact
your system programmer to find out why the job log could not be accessed.
System programmer response: Check if JOBLOGRETRIEVAL(IMMEDIATE) was specified and the job contained
no catalog updates. (IMMEDIATEALL is required to guarantee always to find a job log or the STORELOG keyword in
the controller must be set to ALL). Check if the job log was specified in a class that catalog management is requested
to check. If you are using the archiver interface, check that the archiver still has the SYSOUT for the job. If it does,
check the logic of EQQUX010.
EQQM396E EXCLUDE SELECTION COMMAND(S) OUTSIDE RESTART SCOPE
Explanation: You have defined one or more exclude-step row commands (X = Exclude a step from restart) and at
least one of the excluded steps is either before the Start-selection or after the End-selection.
System action: The panel is redisplayed with this error message.
User response: Correct your definitions by moving the exclude commands inside the Start-End restart scope.

Chapter 19. EQQMnnn Messages

247

EQQM397E EQQM402W

EQQM397E SELECTED STEPS CHANGED - REBUILD JCL
Explanation: You have selected, or excluded, steps without issuing the GO command to build JCL according to the
selected or excluded steps, or both.
System action: The panel is redisplayed with this error message.
User response: Change the selections, issue the GO command for the current selection, or CANCEL the step restart.
EQQM398W NO STEPS HAVE BEEN SELECTED FOR THIS STEP RESTART
Explanation: You have attempted a step restart without selecting a restart step or an end step.
System action: If you confirm the restart, Tivoli OPC performs cleanup of datasets for the entire job and the current
JCL is resubmitted without modification.
User response: Either accept the restart with the current JCL or cancel the step-level restart on the Step-Restart
Confirmation panel.
EQQM399W CM ACTION SPECIFIED FOR THIS JOB IS OCHCNO
Explanation: The job to be rerun contains GDG datasets but catalog management action for the operation is none.
The absolute GDG value is missing, therefore missing and the GDG dataset cannot be resolved.
System action: The JCL is presented with the specification of the GDG dataset unchanged.
User response: Change the DD statement manually. When using step-level restart for operations containing GDG
datasets the catalog management action should be set to D or Y (D is recommended).
EQQM400W THE OPERATION HAS NOT BEEN SELECTED FOR RESTART
Explanation: To use the row command just entered, the operation must have been selected previously for restart.
System action: None.
User response: Enter the S (select) row command to select the operation for restart and enter one of the other
history row commands.
EQQM401W THE DB2 HISTORY DATABASE IS NOT AVAILABLE
Explanation: The database that holds the operation data for old occurrences is not available. Possible reasons are:
The database has been stopped or abended.
The table space holding the data has been closed.
The name specified in the DB2SYSTEM keyword in not correct.
System action: DB2 diagnostic messages are written to the Tivoli OPC EQQMLOG dataset.
User response: Contact your system programmer.
System programmer response: Check the EQQMLOG dataset for DB2 messages and take the actions described in
the DB2 documentation.
EQQM402W THE OPC SUBSYSTEM IS NOT CONNECTED TO A DB2 HISTORY DATABASE
Explanation: When processing the request, Tivoli OPC found either of the following conditions:
The DB2 system specified in the DB2SYS keyword of the OPCOPTS initialization statement could not be
connected.
The OPERHISTORY keyword was not specified in the OPCOPTS statement.
System action: If Tivoli OPC tried to connect to a DB2 system, DB2 diagnostic messages are written to the Tivoli
OPC EQQMLOG dataset.
User response: Contact your system programmer.
System programmer response: Check the EQQMLOG dataset for DB2 messages and take the actions described in
the DB2 documentation.

248

Tivoli OPC Messages and Codes

EQQM403E EQQM910E

EQQM403E COULD NOT RETRIEVE REQUIRED DATA. DB2 RETURN CODE IS DB2RC
Explanation: Tivoli OPC tried to access data in the DB2 history database, but failed to do so. The resulting DB2
messages are written to the Tivoli OPC EQQMLOG dataset. The return code is the sqlcode returned by DB2.
System action: DB2 diagnostic messages are written to the EQQMLOG dataset.
User response: Contact your system programmer.
System programmer response: Check the EQQMLOG dataset for DB2 messages and take the action described in
the DB2 documentation.

| EQQM404I THE JCL FOR THIS OPERATION MIGHT NOT BE THE ORIGINAL JCL
Explanation: No job for this operation was found in the history database. This job was copied from the EQQJBLIB
file.
System action: Processing continues.
User response: Verify if the job needs to be changed before it is submitted.
EQQM405W THE HISTORY FUNCTION IS NOT ACTIVE
Explanation: You tried to retrieve operations from the history database, but the history function is not active on your
Tivoli OPC subsystem.
System action: Processing continues.
User response: Contact your system programmer.
System programmer response: The OPERHISTORY and DB2SYSTEM keywords must be specified on the
BATCHOPTS or OPCOPTS statement to activate the history function. Refer to the Tivoli OPC documentation for
more information.

| EQQM406W OCCURRENCE NOT FOUND (OCCNF) OR OPERATION NOT FOUND (OPRNF)
| Explanation: The selected data could not be found in the DB2 history database. Either the occurrence is missing
| (OCCNF is set to x) or the operation record is missing (OPRNF is set to x). The data may have been deleted after
the list of occurrences was created.
System action: The system waits for you to respond.
User response: Return to the previous panel and re-create the list of occurrences.
System programmer response: If the problem reoccurs when the list has been re-created, analyze the messages in
the Tivoli OPC message log, to determine the cause of the error. If there are no messages, contact your IBM
representative.
EQQM900E INVALID SUBSYSTEM REQUEST.

SEE EQQDUMP DATA SET

Explanation: Validation of data has failed.
System action: The request is rejected.
User response: Contact your system programmer.
System programmer response: Contact your IBM representative. The dump dataset (ddname EQQDUMP)
contains a snap dump of the attempted request. This is needed for diagnostics.
EQQM910E USER USER NOT AUTHORIZED TO ACCESS RESOURCE: RESOURCE
Explanation: A modify current plan request attempted to access the resource RESOURCE, but the user USER
making the request was not authorized to access the resource.
System action: The request is rejected.
System programmer response: None.

Chapter 19. EQQMnnn Messages

249

EQQM911E EQQM914E

EQQM911E INVALID DEPENDENCY INFO FOR: APPL, OPER, PRED: PRED
Explanation: A modify current plan request failed because dependency data has been changed during the dialog
session. The request was attempted for application APPL and operation number OPER. The number of the
predecessor operation is PRED.
System action: The request is rejected and message EQQM025E is issued.
Problem determination: The request contained a reference to a dependency that Tivoli OPC could not find or that
was invalid. The operation and predecessor numbers are given in hexadecimal form. Use HEX ON when browsing
the Tivoli OPC message log.

| Problem determination: If the message is not in the controller message log, review the dump dataset (ddname
| EQQDUMP) for more information.
System programmer response: If the error reoccurs, investigate the failing occurrence to see if any abnormal
activities have been associated with it.
EQQM914E REQUEST TO DELETE OPERATION THAT DOES NOT EXIST OPERATION: APPL, IA, OPER
Explanation: A modify current plan request to delete an operation failed because the requested operation did not
exist in the occurrence.
The application ID, input arrival date and time, and operation number are listed.
System action: The request is rejected and message EQQM025E is issued.
Problem determination: Dependency data has probably been changed during the dialog session.

250

Tivoli OPC Messages and Codes

EQQM915E EQQM919E

EQQM915E DELETION OF OPERATION OPER IN APPL SPLITS NETWORK
Explanation: A modify current plan request to delete an operation failed because the deletion would have split the
occurrence network. The operation to be deleted is identified as application ID APPL and operation number OPER.
System action: The request is rejected and message EQQM025E is issued.
Problem determination: Dependency data has probably been changed during the dialog session.

| Problem determination: If the message is not in the controller message log, review the dump dataset (ddname
| EQQDUMP) for more information.
User response: Check that the correct special resources are defined for the operation.
EQQM917E TOO MANY PREDECESSORS FOR APPL, OPER
Explanation: A modify current plan request would generate too many predecessors for the operation. The operation
for which the request is made is identified as application ID APPL and operation number OPER.
System action: The request is rejected and message EQQM025E is issued.
Problem determination: Dependency data has probably been changed during the dialog session. The operation
number is given in hexadecimal form. Use HEX ON when browsing the Tivoli OPC message log.
System programmer response: If the error reoccurs, investigate the failing occurrence to see if any abnormal
activities have been associated with it. Report the error to your IBM representative.
EQQM918E TOO MANY SUCCESSORS FOR APPL, OPER
Explanation: A modify current plan request would generate too many successors for an operation. The operation for
which the request is made is identified as application ID APPL and operation number OPER.
System action: The request is rejected and message EQQM025E is issued.
Problem determination: Dependency data has probably been changed during the dialog session. The operation
number is given in hexadecimal form. Use HEX ON when browsing the Tivoli OPC message log.
System programmer response: If the error reoccurs, investigate the failing occurrence to see if any abnormal
activities have been associated with it. Report the error to your IBM representative.
EQQM919E PREDECESSOR IS ALSO SUCCESSOR PREDECESSOR: PREDA, PREDO SUCCESSOR : SUCCA,
SUCCO
Explanation: A modify current plan request would have caused a loop in the network.
The application IDs and operation number are listed. The operation number is given in hexadecimal form. Use HEX
ON when browsing the Tivoli OPC message log.
System action: The request is rejected and message EQQM025E is issued.
Problem determination: Dependency data has probably been changed during the dialog session.
System programmer response: If the error reoccurs, investigate the failing occurrence to see if any abnormal
activities have been associated with it. Report the error to your IBM representative.

Chapter 19. EQQMnnn Messages

251

EQQM920E EQQM923I

EQQM920E EXTERNAL DEPENDENCY ALREADY EXISTS APPLICATION: APPL OPERATION: OPER
PREDECESSOR: PREDA OPERATION: PREDO
Explanation: A modify current plan request attempted to add a dependency that already exists.
The application IDs and operation numbers are listed. The operation numbers are given in hexadecimal form. Use
HEX ON when browsing the Tivoli OPC message log.
System action: The request is rejected and message EQQM025E is issued.
Problem determination: Dependency data has probably been changed during the dialog session.

The last internal dependency cannot be deleted.
The delete would have resulted in a split into two networks.
The predecessor specification is not found.

System action: The request is rejected and the requestor is notified of the error with a message.
Problem determination: The last line of the message identifies the occurrence and the internal dependency that
was to be deleted.

| Problem determination: If the message is not in the controller message log, review the dump dataset (ddname
| EQQDUMP) for more information.
User response: Check that the correct special resources are defined for the operation.
EQQM923I JOBLOG FOR JOBN (JOBNUM) ARRIVED
Explanation: You have made a catalog management request or a browse-joblog request on a Tivoli OPC subsystem
activated for step-level restart and where the required job logs are retrieved at the time of your request. Tivoli OPC
requested the tracker to retrieve the job log and SYSOUT has been returned to the controller.
System action: The message is displayed as a TSO broadcast message to the requesting user at the first
interaction after the message is sent.
User response: Either use the Catalog Management dialog to make a step-level restart or enter a browse-joblog
command.

252

Tivoli OPC Messages and Codes

EQQM924E EQQM927E

EQQM924E INVALID REQUEST TO MCP - REQUEST FOLLOWS REQUEST
Explanation: A modify current plan request was invalid.
The request is given in hexadecimal form. Use HEX ON when browsing the Tivoli OPC message log.
System action: The request is rejected and message EQQM025E is issued.

| Problem determination: If the message is not in the controller message log, review the dump dataset (ddname
| EQQDUMP) for more information.
System programmer response: If the error reoccurs, investigate the failing occurrence to see if any abnormal
activities have been associated with it. Report the error to your IBM representative.
EQQM925E PRINT OPERATION HAS NO PREDECESSOR OPERATION: APPL, IA, OPER
Explanation: A modify current plan request would have caused a print operation to have no predecessors.
The application ID, input arrival date and time, and operation number are listed. The operation number is given in
hexadecimal form. Use HEX ON when browsing the Tivoli OPC message log.
System action: The request is rejected and message EQQM025E is issued.
Problem determination: Dependency data has probably been changed during the dialog session.

Chapter 19. EQQMnnn Messages

253

EQQM928E EQQM931W

EQQM928E SETUP OPERATION HAS INVALID SUCCESSOR OPERATION: APPL, IA, OPER
Explanation: A modify current plan request would have caused a job setup operation to have no valid computer
operation successor.
The application ID, input arrival date and time, and operation number are listed. The operation number is given in
hexadecimal form. Use HEX ON when browsing the Tivoli OPC message log.
System action: The request is rejected and message EQQM025E is issued.
Problem determination: Dependency data has probably been changed during the dialog session.

| If the message is not in the controller message log, review the dump dataset (ddname EQQDUMP) for more
| information.
System programmer response: If the error reoccurs, investigate the failing occurrence to see if any abnormal
activities have been associated with it. Report the error to your IBM representative.
EQQM929W JOBLOG FOR JOBN (JOBNUM) NOT FOUND
Explanation: You have made a catalog management request or a browse-joblog request on a Tivoli OPC subsystem
activated for step-level restart and where the required job logs are retrieved at the time of your request. Tivoli OPC
requested the tracker to retrieve the job log, but the job log could not be located.
System action: The message is displayed as a TSO broadcast message to the requesting user at the first
interaction after the message is sent.
User response: Because no job log was found, no step-level restart can be performed by Tivoli OPC. If information
exists about the datasets, Tivoli OPC displays a list of datasets that can be manually changed. If no list of datasets
exists, Tivoli OPC accepts a job-restart, but does not change the JCL or make catalog updates. If you made a
browse-joblog request, nothing is displayed and an error message is issued.
Check with your system programmer why the job log could not be retrieved.
System programmer response: Check the tracker message log, EQQMLOG, for messages to help diagnose the
problem.
EQQM930E CP MAY BE DESTROYED DUE TO ERRORS DURING MCP UPDATE
Explanation: An error occurred while updating the current plan, causing it to be partially updated.
System action: Processing is terminated for the current request and message EQQM025E is issued.
Problem determination: Previous error messages in the Tivoli OPC message log contain additional information
about this error.
System programmer response: See message EQQM936E.
EQQM931W JOBLOG FOR JOBN (JOBNUM) IN ERROR
Explanation: You have made a catalog management request or a browse-joblog request on a Tivoli OPC system
activated for step-level restart and where the required job logs are retrieved at the time of your request. Tivoli OPC
requested the tracker to retrieve the job log, but error return codes were issued when the tracker tried to retrieve the
job log.
System action: The message is displayed as a TSO broadcast message to the requesting user at the first
interaction after the message is sent.
User response: Because no job log was found, no step-level restart can be performed by Tivoli OPC. If information
exists about the datasets, Tivoli OPC displays a list of datasets that can be manually changed. If no list of datasets
exists, Tivoli OPC accepts a job-restart. but does not change the JCL or make catalog updates. If you made a
browse-joblog request, nothing is displayed and an error message is issued.
Check with your system programmer why the job log retrieval request returned an error code.
System programmer response: Check the tracker message log, EQQMLOG, for messages to help diagnose the
problem.

254

Tivoli OPC Messages and Codes

EQQM932E EQQM935E

EQQM932E OPERATION OPNUM IS TOO LARGE - MCP UPDATE NOT POSSIBLE
Explanation: A modify current plan request was rejected because it would have caused a current plan record to
become larger than the maximum record size in the current plan dataset.
System action: The current plan is not updated and message EQQM164E is issued.
Problem determination: Determine if the maximum record size of the current plan is smaller than recommended, or
if the failing operation contains too many special resources or too many dependencies.
System programmer response: If the maximum record size for the current plan is too small, reallocate the current
plan datasets with a larger record size: stop Tivoli OPC, copy the current plan datasets, and restart with the new
datasets.
If the failing operation contains many special resources or dependencies, simplify the definition of the operation and
retry the modify current plan request.
EQQM933E WORK STATION WSNAME NOT FOUND FOR OPERATION: APPL: APPL, IA, OPER
Explanation: A modify current plan request specifies an operation on a workstation (WSNAME) that is not defined to
the current plan.
The application ID, input arrival date and time, and operation number are listed. The operation number is given in
hexadecimal form. Use HEX ON when browsing the Tivoli OPC message log.
System action: The request is rejected and message EQQM025E is issued.
Problem determination: Dependency data has probably been changed during the dialog session.

| If the message is not in the controller message log, review the dump dataset (ddname EQQDUMP) for more
| information.
System programmer response: None.
EQQM934E JOBLOG FOR JOBN (JID) CANCELLED. REISSUE REQUEST
Explanation: You have made a catalog management request or a browse-joblog request on a Tivoli OPC subsystem
activated for step-level restart and where the required job logs are retrieved at the time of your request. Tivoli OPC
has initiated the retrieval request, but error return codes were issued by internal Tivoli OPC functions.
This message is normally issued when the communication between the controller and the tracker has resumed after a
failure. Tivoli OPC was unable to stack your request and asks you to reissue it.
System action: The message is displayed as a TSO broadcast message to the requesting user at the first
interaction after the message is sent.
User response: Reissue the catalog management request or the browse-joblog request.
EQQM935E WORK STATION WSNAME NOT FOUND IN WQA
Explanation: A modify current plan request attempts to update a workstation (WSNAME) that is not defined to the
current plan in the workstation queue area.
System action: The request is rejected and message EQQM025E is issued.

| Problem determination: If the message is not in the controller message log, review the dump dataset (ddname
| EQQDUMP) for more information.
System programmer response: None.

Chapter 19. EQQMnnn Messages

255

EQQM936E EQQM951E

EQQM936E NORMAL MODE MANAGER WILL RESTART FROM CHECKPOINT
Explanation: A serious error related to the current plan dataset has occurred.
System action: The normal mode manager (NMM) subtask restarts and re-creates the current plan dataset.
Problem determination: Use the Tivoli OPC message dataset to investigate the cause of the original error.
System programmer response: If the recovery procedure fails, that is, the NMM is unable to restart, Tivoli OPC
should be canceled (not stopped). If the subsystem is stopped, the error extends to the alternative current plan
dataset. If the recovery procedure is successful, Tivoli OPC normal processing can continue.
EQQM937E TURNOVER IN PROCESS AND OCCURRENCE HAS STATUS COMPLETE APPLICATION: APPL
Explanation: An attempt to modify an occurrence with status complete during a turnover has been rejected.
System action: The request is rejected and either message EQQM027E or message EQQM028I is issued.

| Problem determination: If the message is not in the controller message log, review the dump dataset (ddname
| EQQDUMP) for more information.
User response: To rerun the occurrence or any of its operations, use the Modify Current Plan dialog to add a new
occurrence. This is necessary because Tivoli OPC does not copy a completed occurrence to the new current plan.
EQQM950E INPUT ARRIVAL NOT WITHIN CURRENT PLAN, ENDS CPE REQUEST
Explanation: A request to modify or create an occurrence on the current plan specifies an input arrival time later
than or equal to the current plan end time. All modifications to the current plan must be earlier than the current plan
end time. The request type is given by REQUEST.
System action: The request is terminated with an error return code.
Problem determination: This message should be followed by another message from the function requesting the
current plan modification.

| If the message is not in the controller message log, review the dump dataset (ddname EQQDUMP) for more
| information.
User response: If necessary, extend the current plan to get the failing function to work.
EQQM951E FAILED TO ADD APPLICATION ADID REASON: CANNOT READ CURRENT PLAN RECORD
Explanation: A request to create an occurrence on the current plan failed due to an I/O error.
System action: The request is terminated and the processing continues with the next request.
Problem determination: The message log contains the I/O error message.

| If the message is not in the controller message log, review the dump dataset (ddname EQQDUMP) for more
| information.
User response: Resubmit the job when the problem causing the I/O error has been corrected.
System programmer response: Review the message log of the Tivoli OPC subsystem to determine the cause of
the error. If you cannot determine the cause and the error persists, contact your IBM representative.

256

Tivoli OPC Messages and Codes

EQQM952E EQQM954E

EQQM952E FAILED TO ADD APPLICATION ADID REASON: NO UNIQUE INPUT ARRIVAL TIME LEFT IN CP
FOR THIS APPLICATION
Explanation: A request to create an occurrence on the current plan failed because the occurrence already exists- In
the request, no input arrival time was given, which implies that a default input arrival time should be selected. This
default is the current time, consisting of the current date, current hour, and current minute. If an occurrence of the
application with that input arrival time already exists, the next minute is used. If that occurrence also exists, the
following minute is used. This search for an input arrival time continues up to the current plan end time.
System action: The request is terminated and processing continues with the next request.
Problem determination: This message should be followed by another message from the function requesting the
current plan modification.

| If the message is not in the controller message log, review the dump dataset (ddname EQQDUMP) for more
| information.
User response: If necessary, extend the current plan to get the failing function to work.
EQQM953E FAILED TO ADD APPLICATION ADID REASON: 'ADD' TIME LATER THAN CURRENT PLAN END
TIME
Explanation: A request to create an occurrence on the current plan failed because the current plan end time has
passed. In the request, no input arrival time was given, which implies that a default input arrival time should be used.
This default is the current time, consisting of the current date, current hour, and current minute. The request is
rejected because the current plan ends before current time.
System action: The request is terminated and processing continues with the next request.
Problem determination: This message should be followed by another message from the function requesting the
current plan modification.

| If the message is not in the controller message log, review the dump dataset (ddname EQQDUMP) for more
| information.
User response: If necessary, extend the current plan to get the failing function to work.
EQQM954E FAILED TO ADD APPLICATION ADID NO ACTIVE VERSION OF THE APPLICATION DESCRIPTION
IN THE DATA BASE
Explanation: The Tivoli OPC subsystem has received a request to add an occurrence of application ADID to the
current plan. The application description in the EQQADDS file could not be read (record not found).
System action: The request to add the current plan occurrence is rejected.
Problem determination: If the attempt to add an application was caused by an event-triggered tracking (ETT)
triggering event, check the ETT triggering criteria. Make sure that the triggering event points to an active application
description.
If the attempt to add an application was caused by a program interface request, check the application name given in
the program interface request.

| If the message is not in the controller message log, review the dump dataset (ddname EQQDUMP) for more
| information.
User response: Correct the errors.

Chapter 19. EQQMnnn Messages

257

EQQM955E EQQM970W

EQQM955E FAILED TO ADD APPLICATION ADID CAN NOT READ THE APPLICATION DESCRIPTION FILE
Explanation: The Tivoli OPC subsystem has received a request to add an occurrence of application ADID to the
current plan. The application description file was not open.
System action: The request to add the current plan occurrence is rejected.
Problem determination: The message log should contain a previous message giving the reason why the file is not
open.

| If the message is not in the controller message log, review the dump dataset (ddname EQQDUMP) for more
| information.
User response: Review the message log and correct any errors.
EQQM956E FAILED TO ADD/MODIFY APPLICATION ADID. OCCURRENCE WITH SAME APPLICATION ID AND
INPUT ARRIVAL EXISTS IN THE LONG-TERM PLAN
Explanation: A request to create or modify an occurrence in the current plan failed because the request specified an
application ID and input arrival date and time that are the same as an existing occurrence in the long-term plan.
System action: The request to create or modify the occurrence in the current plan is rejected.

| Problem determination: If the message is not in the controller message log, review the dump dataset (ddname
| EQQDUMP) for more information.
User response: Change the input arrival date or time and resubmit the request.
EQQM961E MODIFY CURRENT PLAN REQUEST FAILED, INSUFFICIENT STORAGE. REASON: RS
Explanation: A request to create or modify an occurrence on the current plan failed due to storage allocation failure.
The reason code provides debugging information.
System action: The request is terminated and processing continues with the next request.
Problem determination: This message should be followed by another message from the function requesting the
current plan modification.

| If the message is not in the controller message log, review the dump dataset (ddname EQQDUMP) for more
| information.
System programmer response: Allocate a larger region to the Tivoli OPC subsystem and restart the subsystem. If
the error persists, contact your IBM representative.
EQQM970W THE POTENTIAL PREDECESSOR RECORD FOR APPLICATION APPL COULD NOT BE UPDATED
THE MAXIMUM NUMBER (1000) OF POTENTIAL SUCCESSOR OPERATIONS HAS BEEN REACHED.
Explanation: The modify current plan (MCP) service processor was unable to add any more successor operation
entries to a potential predecessor record. Since the record could not be updated as intended, it now does not define
all potential successors for application APPL. If new occurrences of this application are added by program interface
(PIF) programs or by the event-triggered tracking (ETT) function it is no longer possible to add all possible successor
dependencies automatically.
System action: The MCP processor continues processing the current add occurrence request.
Problem determination: This message indicates that many different operations in different applications have defined
operations of one application as external predecessors. If the message is unexpected, review the contents of the
application description database and remove old applications that are no longer used.
User response: Use the Modify Current Plan dialog to add new occurrences of the application defined by this
message and use the DEP primary command to verify that successor dependencies have been set up correctly.

258

Tivoli OPC Messages and Codes

EQQM971E EQQM974I

EQQM971E FAILED TO ADD APPLICATION ADID. REQUESTING FUNCTION IS FUNC REASON: MAXIMUM
NUMBER OF OCCURRENCES OF THIS APPLICATION REACHED
Explanation: No more occurrences of this application can be added. Tivoli OPC can handle approximately 870
occurrences of each application.

FUNC is the function that requested the add:
E
A
D

Event-triggered tracking
Automatic recovery
Dialog

System action: The create request is rejected.

| Problem determination: If the message is not in the controller message log, review the dump dataset (ddname
| EQQDUMP) for more information.
User response: Change the criteria for event-triggered tracking. Complete or delete occurrences of this application
that are no longer needed. These occurrences are removed from the plan when a new plan is produced.
EQQM972E MCP WAS UNABLE TO ADD APPLICATION APPL BECAUSE AN MCP CONTROL BLOCK (MT0)
COULD NOT CONTAIN ALL SUCCESSOR DEPENDENCIES TO APPLICATION SUCC
Explanation: The modify current plan (MCP) service processor was unable to add any more successor
dependencies to the MT0 block that is used to define MCP processing. The maximum size of an MT0 block is 32768
bytes.
System action: The MCP processor abandons the attempt to add current occurrence.
Problem determination: This message indicates that many different operations in different applications have defined
operations in current application as external predecessors. If the message is unexpected, review the contents of the
application description database and remove old predecessor definitions that should no longer be used.

| If the message is not in the controller message log, review the dump dataset (ddname EQQDUMP) for more
| information.
User response: Use the Modify Current Plan dialog to add new occurrences of the application defined by this
message, but do not request MCP to automatically add successor dependencies. The same recommendation applies
if the occurrence is being added as a result of event-triggered tracking (ETT) trigger processing or by a program
interface (PIF) program. Instead, add successor dependencies to the occurrence after it has been added to the plan.
EQQM973I CATALOG MANAGEMENT HAS BEEN DISCARDED FOR THE FOLLOWING OPERATION: APPL:
APPL IA: IAD IAT OPERATION: OPER
Explanation: Changing status from Error to Complete indicates that no catalog management action is needed. The
operation had the catalog management attribute set to deferred.
System action: The action is flagged as discarded for the operation.

| Problem determination: If the message is not in the controller message log, review the dump dataset (ddname
| EQQDUMP) for more information.
User response: None.
EQQM974I CATALOG MANAGEMENT ACTION HAS STARTED FOR THE FOLLOWING OPERATION: APPL:
APPL IA: IAD IAT OPERATION: OPER
Explanation: The catalog management action had already started when the status change request was done.
System action: The catalog management action continues until complete. The action statuses are set accordingly.
The operation status is changed.

| Problem determination: If the message is not in the controller message log, review the dump dataset (ddname
| EQQDUMP) for more information.
User response: None.

Chapter 19. EQQMnnn Messages

259

EQQM975E EQQM991E

EQQM975E FAILED TO ADD APPLICATION ADID BECAUSE MAXIMUM NUMBER OF OCCURRENCES
REACHED. REQUESTING FUNCTION IS FUNC.
Explanation: No more occurrences can be added to the current plan because the maximum number of occurrences
(32767) or the number specified in the MAXOCCNUM option of the JTOPTS statement has been reached. ADID
identifies the application that failed to be added. FUNC is the function that requested the add:
A
D
E
P

Automatic recovery
Dialog
Event-triggered tracking
Program interface

System action: The request is rejected.
Problem determination: If you use event-triggered tracking (ETT), program interface (PIF), or Automatic Recovery,
check that these functions are working correctly. For example, make sure that you do not have an endless ETT loop,
where the availability of a special resource is set to YES by a job that ETT adds, when it detects that this same
resource is set to YES. Check the current plan for instances of an unusually high number of occurrences of a
particular application. If you see such an application, look in the application description database and make sure that
the run cycles for the application are correct. When you specify PREVRES(YES) on the BATCHOPT initialization
statement, information about completed and deleted occurrences is carried forward, for reporting purposes, into a new
current plan. If your current plan regularly contains a large number of occurrences, and you specify YES for
PREVRES, you should consider changing this value to NO.

| If the message is not in the controller message log, review the dump dataset (ddname EQQDUMP) for more
| information.
User response: Check that the current plan does not contain any occurrences that should not be in the plan. If you
find any such occurrences, complete or delete them. Replan the current plan to remove all completed and deleted
occurrences, and try to add the occurrence again. If your current plan regularly contains a large number of
occurrences, you should consider shortening the length of the current plan in future daily planning runs.
EQQM976W ONE OR MORE OF THE EXTERNAL DEPENDENCIES OF OPER OPER IN APPLICATION ADID
WERE NOT RESOLVED WITHIN THE GROUP
Explanation: Dependency loops in an occurrence group have been detected and eliminated.
System action: At least one of the external dependencies for the operation has not been resolved within the group.
If there are other occurrences, external to the group, in the current plan that matches the operations dependency
definitions, the dependencies have been resolved for those occurrences. Message EQQM358W is issued.
User response: Check how the dependencies have been resolved and, if appropriate, modify them. So as to avoid
this situation, modify also the application descriptions for this group.
EQQM990E MCP UPDATE FAILED.

FAILING MTD BELOW: MTD

Explanation: A modify current plan request failed because of an error.
The request is given in hexadecimal form. Use HEX ON when browsing the Tivoli OPC message log.
System action: The request is rejected and message EQQM027E is issued.
System programmer response: If the error reoccurs, investigate the failing occurrence to see if any abnormal
activities have been associated with it. Report the error to your IBM representative.
EQQM991E ERROR DURING MCP UPDATE.

FAILING MODULE: MODULE

Explanation: A modify current plan request failed. If message EQQM027E is issued, EQQM991 is followed by
another message that describes the actual error message reported by the modify current plan module MODULE. If
message EQQM028I is issued, no additional message is issued.
System action: The request is rejected and either message EQQM027E or EQQM028I is issued.
System programmer response: If you report the error message following this message to your IBM representative,
the information in this message is also required by IBM to diagnose the error.

260

Tivoli OPC Messages and Codes

EQQN000I EQQN003E

Chapter 20. EQQNnnn Messages
EQQN000I THE NORMAL MODE MANAGER TASK HAS BEEN REQUESTED TO TERMINATE
Explanation: The normal mode manager (NMM) has been requested to terminate processing. This request is
propagated to all active subtasks. The NMM starts its own termination when all subtasks have ended.
System action: The NMM waits for all subtasks to end. When there are no more active subtasks, the NMM backs
up the current plan dataset and terminates.
Problem determination: If the NMM has not ended within a few minutes, there may be a problem in one of the
subtasks that prevents it from ending normally. If the problem cannot be resolved, cancel the subsystem started
subtask and request a dump.
System programmer response: None.
EQQN001I REFRESH IS COMPLETE. CURRENT PLAN IS NO LONGER AVAILABLE
Explanation: A current plan refresh request has been processed by the normal mode manager (NMM). The current
plan dataset has been closed and the checkpoint dataset has been updated to indicate that no current plan is
available. All Tivoli OPC functions that need access to the current plan dataset are inoperative.
System action: All Tivoli OPC functions that do not need access to the current plan continue processing.
Tivoli OPC administrator response: Schedule a batch job to create a new current plan using only long-term plan
information as input.
EQQN002E THE NMM TASK WAS UNABLE TO READ OR UPDATE CURRENT PLAN OPERATION RECORD
WITH KEY (HEXADECIMAL): F0F3OPRINDEX
Explanation: The normal mode manager (NMM) was reading the job tracking log dataset during restart from
checkpoint and met an error accessing a current plan operation record while processing an automatic job recovery
event.
System action: The current job tracking event record is not processed. The NMM continues reading the job tracking
log dataset.
Problem determination: Review the preceding messages in the Tivoli OPC message log and SYSLOG datasets to
determine the cause of the error.
System programmer response: Save the message log dataset containing this error message and the job tracking
log dataset containing the incorrect record. Contact your IBM representative.
EQQN003E VSAM ABENDED WHILE ATTEMPTING TO CLOSE DDNAME FILE. FOR ADDITIONAL
INFORMATION SEE SYSLOG MESSAGES AND DUMP DATA SET
Explanation: A severe error occurred while closing a VSAM file.
System action: A dump is generated. The I/O subtask attempts to continue normal termination processing.
Problem determination: Review earlier messages in the Tivoli OPC message log, SYSLOG, and dump datasets to
determine what caused the close abend.
System programmer response: Save the Tivoli OPC message log and dump datasets and contact your IBM
representative.

 Copyright IBM Corp. 1991, 1999

261

EQQN004E EQQN006E

EQQN004E VSAM PHYSICAL I/O ERROR. DETAILED INFORMATION FOLLOWS: ACTIVE TASK IS TASK. LOAD
MODULE IS MODULE I/O REQUEST IS FROM MODID AT OFFSET +OFFSET REQUESTED
FUNCTION IS FUNC ON LOGICAL FILE FILE, DDNAME DDNAME VSAM RETURN CODE IS 12,
REASON CODE IS RSN, KEY IS KEY VSAM MESSAGE: SYNAD
Explanation: A Tivoli OPC subtask or batch job encountered an I/O error when accessing a VSAM dataset.
System action: The action taken by the Tivoli OPC subtask or batch job is given by additional messages that follow
this message in the Tivoli OPC message log. The VSAM message supplies information such as jobname, stepname,
unit address, device type, ddname, RBA, error description and so on.
Problem determination: The MSGAREA and MSGGEN parameters of the RPL macro are used to extract the
relevant information presented in the VSAM message. Use the VSAM return code, reason code, and message to
determine the cause of the error. For more information, refer to the appropriate documentation for the MVS/DFP
product installed on this MVS system.
System programmer response: Correct the errors and, if necessary, rerun the batch job or restart the Tivoli OPC
subsystem.
EQQN005E THE NORMAL MODE MANAGER TASK HAS ABENDED. FOR ADDITIONAL INFORMATION SEE
SYSLOG MESSAGES AND DUMP DATA SET
Explanation: A severe error has occurred in the normal mode manager (NMM) subtask.
System action: NMM processing is terminated. A dump is created if a dump dataset is defined. Message
EQQZ045W is issued.
Problem determination: Review the preceding messages in the Tivoli OPC message log, SYSLOG, and dump
datasets to determine what caused the NMM to abend.
System programmer response: Save the message log dataset containing this error message, the dump dataset,
and the SYSLOG dataset. Contact your IBM representative.
EQQN006E THE NORMAL MODE MANAGER HAS IGNORED THE FOLLOWING INVALID EVENT RECORD
WHILE PROCESSING THE JOB TRACKING LOG DATA SET DURING RESTART FROM
CHECKPOINT: EXITREC
Explanation: An invalid job tracking event record has been found in the job tracking log dataset. The most likely
cause is that the last four bytes of the record do not contain the Tivoli OPC identifier EQQ3. It is also possible that
the first three characters of the job number field do not contain the character string JOB.
System action: The incorrect job tracking event record is not processed. The normal mode manager (NMM)
continues reading the job tracking log dataset.
Tivoli OPC administrator response: Note the job name and job number in the exit record. If necessary, set the
correct status for this job manually.
System programmer response: Save the Tivoli OPC message log dataset containing this error message and the
job tracking log dataset containing the incorrect record. Contact your IBM representative.

262

Tivoli OPC Messages and Codes

EQQN007E EQQN010E

EQQN007E THE FOLLOWING INVALID RECORD WAS ENCOUNTERED WHEN THE NORMAL MODE MANAGER
WAS PROCESSING THE JOB TRACKING LOG DATA SET DURING RESTART FROM CHECKPOINT:
EVENT HEADER: EVNTHDR EVENT RECORD: EXITREC
Explanation: An invalid job tracking event record has been found in the job tracking log dataset. The normal mode
manager (NMM) could not determine the origin of the event. Each event must come from one of 16 possible event
datasets on each Tivoli OPC node. In the current event record, either the event number in the dataset or the Tivoli
OPC node number is invalid.
System action: The incorrect job tracking event record is not processed. The NMM continues reading the job
tracking log dataset.
Tivoli OPC administrator response: Note the job name and the job number in the exit record. If necessary, set the
correct status for this job manually.
System programmer response: Save the Tivoli OPC message log dataset containing this error message and the
job tracking log dataset containing the incorrect record. Contact your IBM representative.
EQQN008E AN ABEND OCCURRED WHILE PROCESSING THE JOB TRACKING LOG DATA SET DURING
RESTART FROM CHECKPOINT. THE TRACKLOG RECORD HAS BEEN SKIPPED
Explanation: An abend prevented the normal mode manager (NMM) from finishing its processing of a job tracking
event while it read the job tracking log dataset.
System action: MVS recovery/termination is requested to generate a dump. The NMM attempts to continue normal
operation with the next queued event.
Problem determination: Review the Tivoli OPC message log, SYSLOG, and dump datasets to determine the cause
of the error.
Tivoli OPC administrator response: Note the job name and the job number in the exit record. If necessary, set the
correct status for this job manually.
System programmer response: Save the Tivoli OPC message log dataset containing this error message and the
job tracking log dataset containing the incorrect record. Contact your IBM representative.
EQQN009E THE CHECKPOINT DATA SET, DDNAME EQQCKPT, COULD NOT BE OPENED
Explanation: The normal mode manager (NMM) could not open the checkpoint dataset, which is a required dataset
for Tivoli OPC when OPCHOST(YES) is specified.
System action: NMM initialization is terminated.
Tivoli OPC administrator response: Contact your system programmer.
System programmer response: Check that ddname EQQCKPT is correctly specified and that the Tivoli OPC
started task is authorized to open the dataset for update. Correct the errors and restart the NMM.
EQQN010E AN I/O ERROR OCCURRED WHILE ATTEMPTING TO UPDATE THE CURRENT JOB TRACKING
LOG DATA SET. SYNAD MESSAGE FOLLOWS: SYNMSG
FIRST 90 BYTES OF LOG RECORD FOLLOWS: LOGREC
Explanation: An I/O error occurred when a Tivoli OPC function tried to write a log record to the currently active job
tracking log file.
System action: Tivoli OPC attempts to switch to the next job tracking log file. If this process is successful, the log
record is written to the next log instead. The normal mode manager (NMM) subtask is posted to take a backup of the
current plan.
Tivoli OPC administrator response: Contact your system programmer.
Problem determination: The SYNAD routine collects information such as jobname, stepname, unit address, device
type, ddname, operation, error description, and access method. The SYNADAF macro is used to extract this
information. For a detailed description of the layout refer to the appropriate documentation for the MVS/DFP product
installed on this MVS/ESA system.

Chapter 20. EQQNnnn Messages

263

EQQN011E EQQN016I

System programmer response: Scrap and reallocate the job tracking log dataset at a suitable time when Tivoli
OPC is stopped.
EQQN011E A SEVERE ERROR, SYSTEM ABEND ABEND, OCCURRED WHILE ATTEMPTING TO UPDATE
CURRENT JOB TRACKING LOG DATA SET
Explanation: An abend occurred when a Tivoli OPC function attempted to write a record to the current job tracking
log dataset. If the abend code is SB37 or SD37, the current job tracking log dataset is too small.
System action: Tivoli OPC attempts to switch to the next job tracking log file. If this process is successful, the log
record is written to the next log instead. The normal mode manager (NMM) subtask is posted to take a backup of the
current plan.
Tivoli OPC administrator response: Contact your system programmer.
System programmer response: If the current job tracking log dataset is too small, scrap the current dataset and
allocate a larger one at a suitable time when Tivoli OPC is stopped. Refer to Tivoli OPC Customization and Tuning
for instructions.
EQQN012I OPC JOB TRACKING EVENTS ARE NOW BEING LOGGED ON FILE DDNAME
Explanation: The normal mode manager (NMM) subtask has switched to the next available job tracking log dataset.
This is done after every current plan backup. If dual logging is requested, the dual log dataset is also switched to the
next available dataset.
System action: Normal Tivoli OPC processing continues.
User response: None.
EQQN013I OPC JOB TRACKING IS NOW ACTIVE AND CURRENT PLAN DD-NAME IS DDNAME
Explanation: The normal mode manager (NMM) subtask has started successfully and there is an available current
plan.
System action: Normal Tivoli OPC processing continues.
User response: None.
EQQN014I THE JOB TRACKING LOG DATA SET, DDNAME JTFILE, HAS BEEN USED TO UPDATE THE
CURRENT PLAN. NUMBER EVENTS HAVE BEEN APPLIED TO DD-NAME DDNAME
Explanation: The normal mode manager (NMM) determined that the current plan dataset could not be used. A new
current plan has been created by starting from the old current plan and reprocessing events logged on the job tracking
log dataset.
System action: Normal Tivoli OPC processing continues.
User response: None.
EQQN015I A VSAM DATA SET WAS SUCCESSFULLY COPIED: FROMDD=FROMDD, TODD=TODD
Explanation: A Tivoli OPC subtask has finished copying a VSAM dataset to a backup dataset.
System action: Normal Tivoli OPC processing continues.
User response: None.
EQQN016I DDNAME OF CURRENT JCL REPOSITORY DATA SET IS DDNAME
Explanation: In the JCL repository dataset, the name in use after a copy is DDNAME.
System action: Tivoli OPC processing continues.
User response: None.

264

Tivoli OPC Messages and Codes

EQQN017I EQQN022I

EQQN017I THE JCL REPOSITORY DATA SET WILL BE COPIED
Explanation: A Tivoli OPC subtask has started to copy the JCL repository dataset because either the current one
has reached its maximum size or a backup has been requested using the BACKUP TSO command for the JS
resource.
System action: Tivoli OPC processing continues.
User response: None.
EQQN018I VSAM LSR BUFFERS HAVE BEEN SUCCESSFULLY ALLOCATED FOR VSAM FILE DDNAME
NUMBER OF INDEX BUFFERS ARE NINDEX WITH SIZE SINDEX
NUMBER OF DATA BUFFERS ARE NDATA WITH SIZE SDATA
Explanation: A VSAM LSR buffer pool has been successfully built for the file allocated to DDNAME. This message
documents the size of the buffer pool and can be issued for either EQQCPxDS or EQQTBxDS.
System action: Tivoli OPC continues and uses the new buffer pool for I/O to the file.
Problem determination: If necessary, verify that the size of the buffer pool is adequate.
System programmer response: None.
EQQN019W VSAM LSR BUFFER ALLOCATION FAILED FOR VSAM FILE DDNAME RETURN CODE FROM
BLDVRP WAS VRPRC REQUESTED NUMBER OF INDEX BUFFERS WAS NINDEX WITH SIZE
SINDEX REQUESTED NUMBER OF DATA BUFFERS WAS NDATA WITH SIZE SDATA
Explanation: Tivoli OPC was unable to build a VSAM LSR buffer pool for the file identified by DDNAME. This
message documents the size of the buffer pool that Tivoli OPC was trying to build and the return code from the build
buffer pool service. The message can be issued for either EQQCPxDS or EQQTBxDS.
System action: Tivoli OPC continues and uses normal VSAM buffering techniques for the file.
Problem determination: Use the VSAM return code to determine the cause of the error. For more information, refer
to the appropriate documentation for the MVS/DFP product installed on this MVS system.
System programmer response: Correct the error and restart Tivoli OPC.
EQQN021E VSAM FILE FILE COULD NOT BE COPIED BECAUSE INPUT OR OUTPUT DATA SET COULD NOT
BE OPENED
Explanation: The normal mode manager (NMM) could not copy the specified file because an error occurred when
opening the input or output datasets.
System action:

The NMM is terminated.

Problem determination: Review earlier messages in the Tivoli OPC message log to determine the exact reason for
this message.
System programmer response: Correct the errors and, if necessary, restart the NMM.
EQQN022I A CURRPLAN(NEW) RESTART REQUEST IS BEING PROCESSED. OPC WILL START FROM THE
NEW CURRENT PLAN DATA SET, DDNAME=EQQNCPDS, AND APPLY EVENTS FROM THE
ARCHIVED JT LOG DATA SET, DDNAME=EQQJTARC
Explanation: Tivoli OPC re-creates a current plan by copying the new current plan dataset, EQQNCPDS, and
updates it using events from the archived job tracking log and from the current job tracking log dataset.
System action: The Tivoli OPC restart process continues.
User response: None.

Chapter 20. EQQNnnn Messages

265

EQQN023I EQQN026W

EQQN023I VSAM LSR BUFFERS HAVE BEEN SUCCESSFULLY DELETED FOR VSAM FILE DDNAME
Explanation: Tivoli OPC successfully deleted the buffer pool for the file indicated in the message.
System action: None.
User response: None.
EQQN024W VSAM LSR BUFFER DELETE FAILED FOR VSAM FILE DDNAME RETURN CODE FROM DLVRP
WAS VRPRC
Explanation: Tivoli OPC could not delete the buffer pool for the file indicated in the message.
System action: None.
Problem determination: Use the VSAM return code to determine the cause of the error. For more information, refer
to the appropriate documentation for the MVS/DFP product installed on this MVS system.
User response: Use the return code to determine the cause of the error and take appropriate action.
EQQN025E AN ERROR OCCURRED WHILE READING THE JOB TRACKING LOG DATA SET DURING RESTART
FROM CHECKPOINT. THE DATA SET HAS BEEN TRUNCATED
Explanation: The normal mode manager (NMM) was reading the job tracking log dataset during restart from
checkpoint. An abend prevented it from processing the entire dataset.
System action: MVS recovery/termination is requested to generate a dump. The NMM tries to complete the restart
by treating the error as an end-of-file on the log dataset.
Problem determination: Review the Tivoli OPC message log., SYSLOG, and dump datasets to determine the cause
of the error.
Tivoli OPC administrator response: Review the status of all operations in the current plan. If necessary, set the
correct statuses manually.
System programmer response: Save the message log dataset containing this error message and the job tracking
log dataset causing the error. Contact your IBM representative.
EQQN026W A NEW CURRENT PLAN (NCP) HAS BEEN REJECTED
Explanation: Tivoli OPC has detected that a new current plan (NCP) has been created by a daily planning batch job,
but because Tivoli OPC failed to create a valid backup of the current plan (CP) to be used as input for the batch job,
the NCP is considered invalid and is not used. This message is also issued when the checkpoint dataset (EQQCKPT)
has not been initialized.
System action: Tivoli OPC starts up with the CP that was in use before Tivoli OPC was terminated. If the
EQQCKPT dataset has been reallocated, Tivoli OPC does not permit current plan actions as the old CP cannot
accurately be identified.
Problem determination: Review the message log from the previous Tivoli OPC startup and look for error messages
that could explain why the backup process failed. If the Tivoli OPC backup process failed due to an open error, the
reason could be that another job was using the file.
System programmer response: Ensure that both the CP1 and CP2 datasets are online and available for Tivoli
OPC. Rerun the daily plan batch job, to create a new NCP.
If the EQQCKPT dataset has been reallocated specify the JTOPTS keyword CURRPLAN(NEW) option and restart the
Tivoli OPC subsystem.

266

Tivoli OPC Messages and Codes

EQQN027E EQQN031E

EQQN027E THE NORMAL MODE MANAGER IS TERMINATING UNEXPECTEDLY. NMMSTAT IS NMMSTAT
Explanation: The normal mode manager (NMM) is in the processing of terminating unexpectedly. The reason for
the termination is documented by NMMSTAT, which can have the following values:
E
A
S

An I/O error has occurred
Virtual storage is exhausted
Termination is requested by another Tivoli OPC function.

System action: NMM terminates all related subtasks. Tivoli OPC continues to execute, but when the NMM subtask
has terminated current plan functions are not available.
Problem determination: Review the Tivoli OPC message log (EQQMLOG) for preceding error messages that
describe the problem.
User response: Contact your system programmer.
System programmer response: Analyze the preceding messages and take appropriate action to prevent NMM from
terminating. To reactivate NMM, issue F ssnm,S=NMM.
EQQN028E CANNOT COPY VSAM FILE INFILE TO FILE FILE MAXIMUM OUTPUT RECORD SIZE IS SMALLER
THAN MAXIMUM INPUT RECORD SIZE
Explanation: The normal mode manager (NMM) has been requested to copy the specified file, but was unable to do
so because the maximum size of records in the output dataset is smaller than the maximum size of records in the
input dataset.
System action: The NMM is terminated. Message EQQZ045W is issued.
System programmer response:
the input dataset and retry.

Reallocate the output dataset so that it has the same maximum record length as

EQQN029E CANNOT COPY VSAM FILE FILE. BUFFER GETMAIN FAILED
Explanation: The normal mode manager (NMM) has been requested to copy the specified file, but is unable to do
so because of insufficient virtual storage.
System action: The NMM subtask is terminated. Message EQQZ045W is issued.
System programmer response: Stop Tivoli OPC and restart it in a larger region.
EQQN030E ERROR COPYING VSAM FILE. DDNAME = DDNAME, VSAM RC = RC, REASON = RSN
Explanation: The normal mode manager (NMM) has been requested to copy the VSAM dataset DDNAME, but is
unable to do so because a logical VSAM error occurred.
System action: The VSAM copy process is stopped.
Problem determination: Use the VSAM return code and reason code to determine the cause of the error. For more
information, refer to the appropriate documentation for the MVS/DFP product installed on this MVS system.
System programmer response: Correct the errors and, if necessary, restart the NMM.
EQQN031E I/O ERROR COPYING VSAM FILE. DDNAME = DDNAME, VSAM MSG FOLLOWS ERRMSG
Explanation: The normal mode manager (NMM) has been requested to copy the VSAM dataset DDNAME, but
cannot do so because a VSAM I/O error occurred.
System action: The VSAM copy process is stopped.
Problem determination: Use the VSAM error message to determine the cause of the error. For more information,
refer to the appropriate documentation for the MVS/DFP product installed on this MVS system.
System programmer response: Correct the errors and, if necessary, restart the NMM.

Chapter 20. EQQNnnn Messages

267

EQQN032E EQQN038E

EQQN032E UNABLE TO OPEN OPC VSAM FILE FILE, VSAM RC = RC, REASON = RSN
Explanation: The Tivoli OPC subsystem or a Tivoli OPC batch job could not open a VSAM dataset.
System action: The messages that follow this message in the message log identify the action taken by the
subsystem or the batch job.
Problem determination: Use the VSAM return code and reason code to determine the cause of the error. For more
information, refer to the appropriate documentation for the MVS/DFP product installed on this MVS system.
System programmer response: Correct the error and restart the Tivoli OPC subsystem or batch job.
EQQN033E OPC VSAM FILE FILE IS INVALIDLY DEFINED
Explanation: After opening a VSAM dataset (FILE), the VSAM I/O subtask determined that the dataset’s attributes
did not agree with the I/O subtask’s expectations for this ddname. For example, an incorrect size of the VSAM key
could cause this message.
System action: The VSAM file is not opened.
Problem determination: Check that the file is correctly specified in the Tivoli OPC started task procedure. Use the
IDCAMS LISTCAT function to determine the attributes of the file. Check that the relative key position is zero and that
the key size is the same as that defined in the Tivoli OPC Installation Guide.
System programmer response: Correct the errors and restart Tivoli OPC.
EQQN034E DAILY PLAN ENDS AFTER FAILURE TO BUILD VSAM LSR POOL, MACRO BLDVRP FAILED WITH
RC=RCODE FOR DDNAME=DDNAME
Explanation: When building a VSAM LSR pool for the file DDNAME, the return code RCODE from BLDVRP macro
indicated that the pool had not been built.
System action: The daily planning job is ended without creating a new current plan.
Problem determination: For return code = 0008, the request could not complete due to lack of virtual storage. The
daily planning job allocates 100 times 32K VSAM LSR buffers, for the new current plan VSAM file, above 16 M. For
other return codes this is probably a system error.
System programmer response: For return code = 0008, make sure that enough virtual storage is available.
Review the REGION parameter in conjunction with the limits in the IEALIMIT/IEFUSI exit. Rerun the daily planning
job.
For other return codes, save the message log containing the error and contact your IBM representative.
EQQN035I REFRESH REQUEST ISSUED BY TSOUSER
Explanation: The TSO user TSOUSER issued a long-term plan (LTP) refresh request.
System action: Tivoli OPC processing continues.
System programmer response: None.
EQQN038E OPC DID NOT GET ENOUGH STORAGE TO BUILD THE TABLE TABLE
Explanation: Tivoli OPC tried to allocate storage to build the specified table, but was not able to obtain sufficient
storage.
System action: Tivoli OPC initialization is terminated.
System programmer response: Check the region size defined in the Tivoli OPC JCL procedure. Increase the
region size and restart Tivoli OPC.

268

Tivoli OPC Messages and Codes

EQQN043E EQQN046I

EQQN043E UNSUCCESSFUL VSAM I/O REQUEST. DETAILED INFORMATION FOLLOWS: ACTIVE TASK IS
TASK. LOAD MODULE IS MODULE I/O REQUEST IS FROM MODID AT OFFSET +OFFSET
REQUESTED FUNCTION IS FUNC ON LOGICAL FILE FILE, DDNAME DDNAME VSAM RETURN
CODE IS 8, REASON CODE IS RSN, KEY IS KEY HEXADECIMAL ZONES HEXKEYZ
HEXADECIMAL DIGITS HEXKEYD

| Explanation: A Tivoli OPC subtask encountered an unexpected error when accessing a VSAM dataset. The return
| code, or RC, is always RC = 08 on return to Tivoli OPC from VSAM. The reason code, or RSN, is the RPL feedback
| code for logical errors and the ACBERFLG for OPEN/CLOSE.
System action: The messages that follow this message in the Tivoli OPC message log indicate the action taken by
the Tivoli OPC subtask.

| Problem determination: Look up the reason code for the requested function in the documentation for the MVS/DFP
| product installed on the MVS/ESA system (the VSAM Instruction Reference books contain a good description of the
| return and reason codes). If this error condition cannot be reproduced, consider activating a VSAM I/O trace to check
preceding VSAM requests that led up to the error.
Note: Activating an I/O trace causes a large amount of output on the message dataset.
System programmer response: Correct the error and, if necessary, restart the subtask that encountered the error.

| Note: Specific corrective action must be taken for the following reason codes:
| RSN=28 DATASET CANNOT BE EXTENDED
|
|

Make additional space available and then stop and restart the controller to force the affected dataset to be
closed and reopened.

| RSN=40 INSUFFICIENT VIRTUAL STORAGE
|

Increase the region avaialbe to the Tivoli OPC controller started task.

EQQN044I A VSAM I/O REQUEST COMPLETED SUCCESSFULLY. DETAILED INFORMATION FOLLOWS:
ACTIVE TASK IS TASK. LOAD MODULE IS MODULE I/O REQUEST IS FROM MODID AT OFFSET
+OFFSET REQUESTED FUNCTION IS FUNC ON LOGICAL FILE FILE, DDNAME DDNAME KEY OF
VSAM RECORD IS KEY HEXADECIMAL ZONES
HEXKEYZ HEXADECIMAL DIGITS HEXKEYD
Explanation: This message is issued for all successful VSAM requests in the Tivoli OPC address space when
VSAM I/O tracing is active.
System action: Tivoli OPC processing continues.
System programmer response: None.
EQQN045E INCORRECT VSAM I/O REQUEST. DETAILED INFORMATION FOLLOWS: ACTIVE TASK IS TASK.
LOAD MODULE IS MODULE I/O REQUEST IS FROM MODID AT OFFSET +OFFSET REQUESTED
FUNCTION IS FUNC ON LOGICAL FILE FILE, DDNAME DDNAME ERROR CAUSE IS: CAUSE
Explanation: A Tivoli OPC subtask or batch job requested VSAM I/O services incorrectly.
System action: The messages that follow this message in the Tivoli OPC message log indicate the action taken by
the Tivoli OPC subtask or batch job.
System programmer response: If necessary, contact your IBM representative.
EQQN046I A LOGICAL VSAM FILE OPERATION WAS COMPLETED. DETAILED INFORMATION FOLLOWS:
ACTIVE TASK IS TASK. LOAD MODULE IS MODULE REQUEST IS FROM MODID AT OFFSET
+OFFSET REQUESTED FUNCTION IS FUNC ON LOGICAL FILE FILE, DDNAME DDNAME
Explanation: This message is issued for all logical VSAM requests in the Tivoli OPC address space when VSAM I/O
tracing is active.
System action: Tivoli OPC processing continues.
System programmer response: None.

Chapter 20. EQQNnnn Messages

269

EQQN047W EQQN051I

EQQN047W OPC SUBTASK TASK HAS TERMINATED WITHOUT CLOSING LOGICAL FILE FILE, DDNAME
DDNAME. VSAM MAY BE UNABLE TO CLOSE THIS FILE
Explanation: This message is issued by the VSAM I/O subtask during Tivoli OPC termination when a Tivoli OPC
subtask ends without closing all of the logical VSAM files that it opened.
System action: The I/O subtask attempts to close the VSAM file.
Problem determination: This message usually indicates that the subtask has terminated abnormally.
System programmer response: Contact your IBM representative.
EQQN049I EXCLUSIVE CONTROL VSAM ERROR, RETCODE 8, REASON CODE 0020, WAS CAUSED BY A
RESOURCE CONFLICT WITH OPC SUBTASK TASK
Explanation: This message contains additional information for a preceding EQQN043E message. It identifies the
Tivoli OPC subtask that has exclusive control of a VSAM control interval that the current Tivoli OPC subtask needs.
System action: Tivoli OPC processing continues.
System programmer response: Save the Tivoli OPC message log dataset containing this message and contact
your IBM representative.
EQQN050E A JOB TRACKING LOG DATA SET, DDNAME DDNAME, COULD NOT BE OPENED
Explanation: The normal mode manager (NMM) could not open the job tracking log dataset DDNAME, which it
requires.
System action: The NMM is terminated. Message EQQN107I is issued.
Problem determination: Check that ddname DDNAME is correctly specified and that the Tivoli OPC started task is
authorized to open the dataset for output.
System programmer response: Correct the errors and restart Tivoli OPC.
EQQN051I A CURRENT PLAN BACKUP PROCESS HAS STARTED. TRIGGER WAS: REASON
Explanation: The normal mode manager (NMM) has begun updating a current plan dataset in preparation for the
creation of a current plan image copy backup. The reason why Tivoli OPC has initiated the backup is identified by the
REASON defined in the message text. The possible values for REASON are:
BACKUP LIM

The number of events specified in the JTOPTS BACKUP keyword has been reached

BACKUP CMD

The backup was initiated as a result of the Tivoli OPC BACKUP command

CATCH UP

Tivoli OPC has successfully recovered the current plan using job-tracking data

JT ERROR

An error on a job-tracking log has caused Tivoli OPC to switch to the next available JT log

NMM ENDING

The Tivoli OPC controller has been requested to shutdown or the NMM subtask has been
requested to stop

DP START

Daily plan turnover phase 1, a daily plan batch extend, replan, trial, or print current period results
process has been started

DP END

Daily plan turnover phase 2, a daily plan extend or replan has created a new current plan that is
being taken over by Tivoli OPC

UNKNOWN

Please take a copy of the EQQJTARC and the EQQMLOG datasets and report to your IBM
representative.

System action: Tivoli OPC backup processing continues. Current plan activity is suspended until the backup is
complete.
User response: None.

270

Tivoli OPC Messages and Codes

EQQN052W EQQN062E

EQQN052W AN OUTSTANDING MCP MODIFY REQUEST HAS BEEN CANCELLED FOR USER USER
REASON IS: REASON. LIST OF AFFECTED OCCURRENCES FOLLOW:
Explanation: A modify current plan (MCP) multiple add request did not complete normally. Tivoli OPC has canceled
the wait for the completing modify request. Operations within such added occurrences may be in held status and
must be released manually.
System action: The wait for the modify request has been canceled.
EQQN053W OCCURRENCE OCCID WITH IA IADATE IATIME MAY CONTAIN HELD OPERATIONS
Explanation: A modify current plan (MCP) multiple add request did not complete normally. Tivoli OPC has canceled
the wait for the completing modify request. Operations within the reported occurrence may be in held status and must
be released manually.
System action: The wait for the modify request has been canceled.
EQQN056I A CURRENT PLAN COPY PROCESS HAS STARTED
Explanation: The normal mode manager (NMM) has started to copy a current plan dataset because either a new
current plan has become available or a current plan image copy backup is to be created.
System action: Tivoli OPC processing continues.
System programmer response: None.
EQQN057I A CURRENT PLAN DATA SET WAS SUCCESSFULLY COPIED: FROMDD=FROMDD, TODD=TODD
Explanation: The normal mode manager (NMM) has finished copying a current plan dataset.
System action: Tivoli OPC processing continues.
System programmer response: None.

| EQQN060E INVALID KEYW KEYWORD VALUE POSITION IN THE WLRSTMT KEYWORD
| Explanation: Keyword WLRSTMT on the JTOPTS statement contains a valid value KEYW, but in an incorrect
| position.
System action: The normal mode manager (NMM) is terminated.
System programmer response: Correct the error and restart the NMM subtask or the Tivoli OPC subsystem. Refer
to Tivoli OPC Customization and Tuning for a description of the keyword.

| EQQN061E TOO MANY KEYWORD VALUES IN THE WLRSTMT KEYWORD
| Explanation: Keyword WLRSTMT on the JTOPTS statement contains too many values.
System action: The normal mode manager (NMM) is terminated.
System programmer response: Correct the error and restart the NMM subtask or the Tivoli OPC subsystem. Refer
to Tivoli OPC Customization and Tuning for a description of the keyword.

| EQQN062E The WLRSTMT KEYWORD CONTAINS UNKNOWN KEYWORD VALUE KEYW
| Explanation: Keyword WLRSTMT on the JTOPTS statement contains a value KEYW, which is not recognized by
| Tivoli OPC.
System action: The normal mode manager (NMM) is terminated.
System programmer response: Correct the error and restart the NMM subtask or the Tivoli OPC subsystem. Refer
to Tivoli OPC Customization and Tuning for a description of the keyword.

Chapter 20. EQQNnnn Messages

271

EQQN070E EQQN082E

EQQN070E KEYVALUE IS NOT A VALID KEYWORD VALUE
Explanation: An invalid keyword value has been defined.
System action: Tivoli OPC uses the default keyword value.
Problem determination: Contact your Tivoli OPC administrator.
Tivoli OPC administrator response: Correct the value for the keyword containing the error and restart Tivoli OPC.
EQQN071E AN ATTEMPT TO UPDATE THE NOERROR TABLE HAS FAILED
Explanation: A modify command was entered requesting the NOERROR table to be updated. One or more errors
were found while processing input NOERROR statements.
System action: The NOERROR table is not changed. Tivoli OPC continues normal processing.
User response: Review earlier error messages in the message log that describe initialization statement processing
errors. Correct all identified errors and reenter the modify command.
EQQN072I THE NOERROR TABLE HAS BEEN SUCCESSFULLY UPDATED
Explanation: A modify command has caused Tivoli OPC to rebuild the NOERROR table from NOERROR
statements in the parameter library.
System action: Tivoli OPC continues normal processing and is using the updated NOERROR table.
User response: None.
EQQN080I THE LOG ARCHIVER TASK HAS STARTED
Explanation: The job-tracking log archiver task has completed initialization and is ready to perform additional work.
System action: Normal Tivoli OPC processing continues.
User response: None.
EQQN081I THE LOG ARCHIVER TASK HAS ENDED
Explanation: The job-tracking log archiver task is ending normally after having been posted to stop processing.
System action: Normal Tivoli OPC processing continues.
User response: None.
EQQN082E NEXT JOB TRACKING LOG DATA SET, DDNAME DDNAME, IS NOT OPEN
Explanation: Tivoli OPC was unable to use the next job-tracking log in a situation where current job&hyohen.tracking
log can no longer be used.
System action: The normal mode manager (NMM) subtask is stopped and the current plan is no longer available.
Problem determination: Review earlier messages in the message log dataset to determine why the next
job-tracking log is not open.
User response: Contact your system programmer.
System programmer response: Stop Tivoli OPC. Ensure that Tivoli OPC is authorized to update all job-tracking
log datasets defined by currently specified (or defaulted) values of the JTLOGS and DUAL keywords of the JTOPTS
initialization statement. Reallocate any job-tracking log datasets that had output errors. After making the necessary
corrections, restart Tivoli OPC.

272

Tivoli OPC Messages and Codes

EQQN083E EQQN087E

EQQN083E THE JTLOGS KEYWORD MUST SPECIFY A VALUE IN THE RANGE 2 TO 99
Explanation: The value specified for the JTLOGS keyword is not supported.
System action: The normal mode manager subtask is terminated.
Tivoli OPC administrator response: Contact your system programmer.
System programmer response: Correct the JTLOGS specification and restart Tivoli OPC.
EQQN084E DD STATEMENT IS MISSING FOR A JOB TRACKING LOG DATASET, DDNAME DDNAME
Explanation: A DD statement needed to support currently specified (or defaulted) values of the JTLOGS and DUAL
keywords of the JTOPTS initialization statement is not defined.
System action: The normal mode manager subtask is terminated.
Tivoli OPC administrator response: Contact your system programmer.
System programmer response: Either change the value defined by the JTLOGS or DUAL keyword or add the
ddname defined by this message to the Tivoli OPC started task procedure. After making the necessary corrections,
restart Tivoli OPC.
EQQN085E UNSUPPORTED ATTEMPT TO REDUCE THE NUMBER OF JOB TRACKING LOGS.
JTLOGS VALUE IS MAXJT, CURRENT JOB TRACKING LOG IS CURJT
Explanation: The value specified for the JTLOGS keyword of the JTOPTS initialization statement is smaller than the
number of the current job-tracking log. This is not supported.
System action: The normal mode manager subtask is terminated.
Tivoli OPC administrator response: Contact your system programmer.
System programmer response: Change the JTLOGS specification to a larger value. After making the necessary
corrections, restart Tivoli OPC.
EQQN086E UNSUPPORTED ATTEMPT TO REDUCE THE NUMBER OF JOB TRACKING LOGS.
JTLOGS VALUE IS MAXJT, LAST ARCHIVED LOG IS ARCJT
Explanation: The value specified for the JTLOGS keyword of the JTOPTS initialization statement is smaller than the
number of the first nonarchived job-tracking log. This is not supported.
System action: The normal mode manager subtask is terminated.
Tivoli OPC administrator response: Contact your system programmer.
System programmer response: Change the JTLOGS specification to a larger value. After making the necessary
corrections, restart Tivoli OPC.
EQQN087E DUAL JOB TRACKING LOG CONTAINS MORE EVENTS THAN PRIMARY JOB TRACKING LOG.
CURRENT JOB TRACKING LOG, DDNAME DDNAME MAY BE INVALID
Explanation: During Tivoli OPC restart it was determined that the dual job-tracking log contains more events that
the primary log. This could indicate that the primary log dataset is invalid.
System action: The normal mode manager (NMM) subtask is terminated.
Tivoli OPC administrator response: Contact your system programmer.
System programmer response: If the primary log dataset is invalid, copy the dual log to the primary log.
Otherwise, if the dual log dataset is invalid, copy the primary log to the dual log. After making the necessary
corrections, restart Tivoli OPC.

Chapter 20. EQQNnnn Messages

273

EQQN088E EQQN092E

EQQN088E NMM WAS UNABLE TO SWITCH TO NEXT JOB TRACKING LOG DATA SET,
DDNAME DDNAME, BECAUSE IT HAS NOT YET BEEN ARCHIVED.
Explanation: Tivoli OPC was unable to use the next job-tracking log in a situation where current job-tracking log can
no longer be used.
System action: The normal mode manager subtask is stopped and the current plan is no longer available.
Problem determination: Review earlier messages in the message log dataset to determine why the next
job-tracking log has not been archived.
Tivoli OPC administrator response: Contact your system programmer.
System programmer response: Stop Tivoli OPC. Ensure that Tivoli OPC is authorized to update all job-tracking
log datasets defined by currently specified (or defaulted) values of the JTLOGS and DUAL keywords of the JTOPTS
initialization statement. Reallocate any job-tracking log datasets that had output errors. After making the necessary
corrections, restart Tivoli OPC.
EQQN090I THE JOB TRACKING LOG DATA SET DEFINED BY DDNAME DDNAME HAS BEEN COPIED TO THE
JOB TRACKING LOG ARCHIVE DATA SET
Explanation: The job-tracking log archiver task has successfully copied a dataset to the archive dataset.
System action: Normal Tivoli OPC processing continues.
User response: None.
EQQN091I THE LOG ARCHIVER TASK WAS UNABLE TO COPY THE DATA SET DEFINED BY DDNAME
DDNAME TO THE JOB TRACKING LOG ARCHIVE DATA SET
Explanation: An error prevented the job-tracking log archiver task from copying a job-tracking log dataset to the
archive dataset.
System action: The job-tracking log archiver task is terminated. The current plan updating tasks continue, but if the
log archiver task problem is not corrected, Tivoli OPC eventually runs out of available job&hypheng log datasets.
Problem determination: Review earlier messages in the message log dataset to determine what prevented the log
archiver task from copying the current log dataset.
Tivoli OPC administrator response: Contact your system programmer.
System programmer response: Stop Tivoli OPC. Make sure that Tivoli OPC is authorized to read all job-tracking
log datasets defined by currently specified (or defaulted) values of the JTLOGS and DUAL keywords of the JTOPTS
initialization statement. Reallocate any job-tracking log datasets that had output errors. After making the necessary
corrections, restart Tivoli OPC.
EQQN092E AN I/O ERROR OCCURRED WHILE ATTEMPTING TO UPDATE THE JOB TRACKING LOG ARCHIVE
DATA SET. THE ARCHIVER TASK IS ENDING. SYNAD MESSAGE FOLLOWS: SYNMSG
Explanation: An I/O error occurred when the job-tracking log archiver task tried to write a log record to the
job-tracking archive log dataset.
System action: The job-tracking log archiver task ends. The current plan updating tasks continue, but if the
job-tracking log archiver task problem is not corrected, Tivoli OPC eventually runs out of available job-tracking log
datasets.
Tivoli OPC administrator response: Contact your system programmer.
Problem determination: The SYNAD routine collects information such as jobname, stepname, unit address, device
type, ddname, operation, error description, and access method. The SYNADAF macro is used to extract this
information. For a detailed description of the layout refer to the appropriate decoumentation for the MVS/DFP product
installed on this MVS/ESA system.
System programmer response: Stop Tivoli OPC. If necessary, allocate a new job-tracking log archive dataset and
copy the old dataset to the new dataset. After making the necessary corrections, restart Tivoli OPC.

274

Tivoli OPC Messages and Codes

EQQN093E EQQN101E

EQQN093E AN SEVERE ERROR, SYSTEM ABEND ABEND, OCCURRED WHILE ATTEMPTING TO UPDATE THE
JOB TRACKING LOG ARCHIVE DATA SET. THE ARCHIVER TASK IS ENDING.
Explanation: An abend occurred when the job-tracking log archiver task tried to write a log record to the job tracking
archive log dataset. If the abend code is SB37 or SD37, the archive dataset is too small.
System action: The job-tracking log archiver task ends. The current plan updating tasks continue, but if the
job-tracking log archiver task problem is not corrected, Tivoli OPC eventually runs out of available job-tracking log
datasets.
Problem determination: Use the abend code to determine what is wrong with the archive dataset.
Tivoli OPC administrator response: Contact your system programmer.
System programmer response: Stop Tivoli OPC. If necessary, allocate a new larger job-tracking log archive
dataset and copy the old dataset to the new dataset. After making the necessary corrections, restart Tivoli OPC.
EQQN094E AN I/O ERROR OCCURRED WHILE ATTEMPTING TO UPDATE A DUAL JOB TRACKING LOG DATA
SET. SYNAD MESSAGE FOLLOWS: SYNMSG
Explanation: An I/O error occurred when a Tivoli OPC function tried to write a log record to the currently active dual
job-tracking log file.
System action: Tivoli OPC stops logging events to the dual job-tracking log datasets. Logging on the primary
job-tracking log datasets continues normally.
User response: Contact your system programmer.
Problem determination: The SYNAD routine collects information such as jobname, stepname, unit address, device
type, ddname, operation, error description, and access method. The SYNADAF macro is used to extract this
information. For a detailed description of the layout refer to the appropriate documentation for the MVS/DFP product
installed on this MVS/ESA system.
System programmer response: Scrap and reallocate the failing dataset at a suitable time when Tivoli OPC is
stopped.
EQQN095E A SEVERE ERROR, SYSTEM ABEND ABEND, OCCURRED WHILE ATTEMPTING TO UPDATE
CURRENT DUAL JOB TRACKING LOG DATA SET
Explanation: An abend occurred when a Tivoli OPC function attempted to write a record to a dual job-tracking log
dataset. If the abend code is SB37 or SD37, the current dual job-tracking log dataset is too small.
System action: Tivoli OPC stops logging events to the dual job-tracking log datasets. Logging on the primary
job-tracking log datasets continues normally.
Tivoli OPC administrator response: Contact your system programmer.
System programmer response: If the current job-tracking log dataset is too small scrapthe current dual log dataset
and allocate a larger one at a suitable time when Tivoli OPC is stopped.
EQQN101E THE OPC MODIFY CURRENT PLAN MODULE, EQQMCTOP, COULD NOT BE LOADED
Explanation: Tivoli OPC could not locate the modify current plan load module, EQQMCTOP.
System action: Normal mode manager (NMM) initialization fails.
System programmer response: Make sure that the EQQMCTOP load module is present in a library that can be
reached by Tivoli OPC, and restart the NMM.

Chapter 20. EQQNnnn Messages

275

EQQN102W EQQN107I

EQQN102W AN OPC USER EXIT LOAD MODULE, MODULE, COULD NOT BE LOADED
Explanation: Tivoli OPC could not locate an exit load module.
System action: This exit is not used by Tivoli OPC.
Problem determination: Check if the module named in this message should be used by Tivoli OPC. Also check
that the module exists in a library that the subsystem started task can reach.
System programmer response: Correct the error and restart the Tivoli OPC subsystem.
EQQN103E THE OPC EVENT HANDLER MODULE, EQQEMEVH, COULD NOT BE LOADED
Explanation: Tivoli OPC could not locate the event handler load module, EQQEMEVH.
System action: Tivoli OPC initialization fails.
System programmer response: Make sure that the EQQEMEVH load module exists in a library that can be
reached by Tivoli OPC and restart the Tivoli OPC started task.

| EQQN104W PROCESSING RETURN CODE RETC from EQQUX011. THE EXIT HAS BEEN MARKED AS NOT
|
EXECUTABLE BUT THE PROCESS CONTINUES
| Explanation: Tivoli OPC has passed job tracking log information to Exit011, but unusual conditions (including errors)
| have been encountered.
| System action: The system writes a job tracking log record, but Exit011 is set as inactive.
| System programmer response: Refer to the meaning of the RETC return code in the Exit011. The code depends
| on Exit011 customization.
EQQN105W NO VALID CURRENT PLAN EXISTS. CURRENT PLAN VSAM I/O IS NOT POSSIBLE
Explanation: The Tivoli OPC checkpoint dataset indicates that no valid current plan exists. All Tivoli OPC functions
that need access to the current plan dataset are inoperative.
System action: The normal mode manager (NMM), which has been initialized, takes a new current plan if one is
created by a daily plan create batch job executing on behalf of this subsystem.
Problem determination: If this message was not expected, check that the started task procedure (ddname
EQQCKPT) is correctly specified. Also check that this subsystem is the only Tivoli OPC subsystem that references
this checkpoint dataset.
System programmer response: Correct the errors and, if necessary, restart the NMM.
EQQN106E ERRORS ENCOUNTERED PROCESSING NMM INITIALIZATION STATEMENTS. THE NORMAL
MODE MANAGER TASK WILL TERMINATE
Explanation: While processing initialization statements, the normal mode manager (NMM) subtask found one or
more errors.
System action: NMM initialization fails.
Problem determination: Review the previous messages in the message log dataset to determine the cause of the
problem.
System programmer response: Correct the error and restart the Tivoli OPC subsystem.
EQQN107I THE NORMAL MODE MANAGER TASK HAS ENDED
Explanation: The normal mode manager (NMM) subtask is ending normally after having initialized successfully.
Usually, this message is due to an operator command requesting the Tivoli OPC subsystem to stop.
System action: Normal Tivoli OPC processing continues.
System programmer response: None.

276

Tivoli OPC Messages and Codes

EQQN108E EQQN109W

EQQN108E THE NEW CURRENT PLAN DATA SET IS INVALID. A NEW NCP DATA SET MUST BE CREATED.
Explanation: The normal mode manager (NMM) subtask found that a new current plan (NCP) in the NCP dataset
did not contain any header record.
System action: NMM does not use the contents of the NCP dataset.
Problem determination: If a daily planing batch job has just ended, check ending conditions for the job. If the error
occurs when Tivoli OPC is starting, verify that the DD statement, EQQNCPDS, defining the NCP file, is correct.
Tivoli OPC administrator response: Contact your system programmer.
System programmer response: If necessary, correct errors in the daily planning input datasets and rerun the daily
planning batch job or correct the NCP file definition problems and restart Tivoli OPC.

| EQQN109W EXIT11 TERMINATES ABNORMALLY. THE EXIT HAS BEEN MARKED AS NOT EXECUTABLE BUT
|
THE PROCESS CONTINUES
| Explanation: Tivoli OPC has passed job tracking log information to Exit011, but an abnormal condition has been
| encountered. This condition has caused an abnormal termination for Exit011.
| System action: The system writes a job tracking log record, but Exit011 is set as inactive.
| System programmer response: None.

Chapter 20. EQQNnnn Messages

277

278

Tivoli OPC Messages and Codes

EQQO001I EQQO006E

Chapter 21. EQQOnnn Messages
EQQO001I APPC TASK INITIALIZATION IS COMPLETE
Explanation: The APPC task has completed initialization processing.
System action: Processing continues.
Operator response: None.

| EQQO002E APPC TASK ABENDED WHEN PROCESSING THE FOLLOWING QUEUE ELEMENT DQE
Explanation: An abend prevented the APPC task from processing a queue element.
System action: MVS recovery/termination is requested to generate a dump. The APPC task attempts to continue
normal processing.
Problem determination: Review the Tivoli OPC message log dataset (EQQMLOG), the diagnostic dataset
(EQQDUMP), and the system dump dataset to determine the cause of the error.
Tivoli OPC administrator response: Contact your system programmer.
System programmer response: Save the EQQMLOG, EQQDUMP, and system dump datasets and contact your
IBM representative.
EQQO003E APPC TASK INITIALIZATION FAILED - XCF FAILURE
Explanation: The APPC task has ended due to an XCF failure or request denied by XCF.
System action: The APPC task is not started.
Operator response: None.
System programmer response: Make sure that the XCF destination names are defined correctly and restart the
APPC task when XCF is available.
EQQO004E APPC TASK INITIALIZATION FAILED - APPC/MVS FAILURE
Explanation: The APPC task has ended due to APPC/MVS failure
System action: The APPC task is not started.
Operator response: Restart the APPC/MVS address space before starting the Tivoli OPC APPC task.
EQQO005I INITIALIZATION FAILED - SUBSYSTEM STOP REQUESTED
Explanation: A stop subsystem command was issued while the APPC task was initializing. This caused the task to
end.
System action: The Tivoli OPC subsystem continues the shutdown sequence.
Operator response: None.
EQQO006E APPC TASK TERMINATED - MVS/APPC SHUTTING DOWN
Explanation: The APPC task has ended due to APPC/MVS ending. All active conversations have been lost.
System action: The APPC task is shut down.
Operator response: When APPC/MVS is available again, restart the Tivoli OPC APPC task.

 Copyright IBM Corp. 1991, 1999

279

EQQO007E EQQO011E

EQQO007E THE APPC TASK IGNORED THE FOLLOWING ELEMENT ON THE APPC QUEUE DQE
Explanation: An invalid allocate request or outbound reply was found on the APPC queue.
System action: Processing continues.
System programmer response: If the element was an allocate request from a user written transaction program
(TP), verify the code in the TP. If not, contact your IBM representative.
EQQO008E THE APPC TASK IGNORED THE FOLLOWING INBOUND APPC BUFFER APP
Explanation: An invalid buffer was received.
System action: Processing continues.
System programmer response: If the element was an inbound request buffer from a user written transaction
program, verify the format of the send buffer in the ATP. If not, contact your IBM representative.
EQQO009E APPC TASK QUEUE POINTERS ARE DESTROYED, APPQ IS LOST
Explanation: The APPC task abended while processing elements on APPQ because the queue chaining is invalid.
System action: MVS recovery/termination is requested to generate a dump. The APPC task attempts to continue
normal processing.
Problem determination: Review the Tivoli OPC message log dataset (EQQMLOG), the diagnostic dataset
(EQQDUMP), and the system dump dataset to determine the cause of the error.
Tivoli OPC administrator response: Contact your system programmer.
System programmer response: Save the EQQMLOG, EQQDUMP, and system dump datasets and contact your
IBM representative.
EQQO010E AN APPC FUNCTION HAS BEEN REQUESTED BUT THE LEVEL OF THE MVS SYSTEM IS NOT
MVS/SP4.2.2 OR HIGHER
Explanation: Tivoli OPC attempted to initialize APPC services, but due to the wrong operating system level, the
attempt failed.
System action: Tivoli OPC continues to initialize without APPC support.
Problem determination: Review the Tivoli OPC initialization statement.
Tivoli OPC administrator response: Remove (or set to NO) the APPCTASK initialization statement.
EQQO011E APPC/MVS INTERFACE MODULE COULD NOT BE LOADED
Explanation: An APPC/MVS interface module was not found in the library search path.
System action: Tivoli OPC continues, but the APPC functions as requested by the APPCTASK keyword are
disabled.
System programmer response: Ensure that the APPC/MVS modules are accessible and restart Tivoli OPC.

280

Tivoli OPC Messages and Codes

EQQPH00I EQQPH07E

Chapter 22. EQQPnnn Messages
EQQPH00I SERVER TASK HAS STARTED
Explanation: The server task has started successfully. This task is started by the server started task. It is started
by the Tivoli OPC subsystem if APPC(YES) is specified in the OPCOPTS initialization statement.
System action: Tivoli OPC continues processing.
EQQPH01I SERVER TASK ENDED
Explanation: The server task has been requested to stop and is ending normally.
System action: Tivoli OPC continues processing.
EQQPH02E SERVER NAME IS ALREADY ACTIVE, IT CANNOT START AGAIN
Explanation: An operator START command has been entered for a Tivoli OPC server that is already active.
System action: The second attempt to invoke the server is terminated.
System programmer response: If you want to restart the Tivoli OPC server, first stop it and issue the START
command.
EQQPH03I AN ELEMENT ON THE APPC/MVS QUEUE IS OF UNRECOGNIZED TYPE: ELEM
Explanation: Tivoli OPC receives APPC/MVS requests, for example, allocate requests, on the APPC/MVS queue.
The queue element presented in the message is not supported by the server task.
System action: The queue element is deleted from the APPC/MVS queue. It causes no further action.
System programmer response: The message variable ELEM gives diagnostics, which is expecially useful if there
are other indications on an error in the Tivoli OPC server APPC/MVS communication.
EQQPH05E BUFFER CONTAINS WRONG AMOUNT OF INPUT DATA, OR WRONG VALUES
Explanation: The communication routines of the Tivoli OPC server APPC/MVS receives data for processing by the
server. The buffer of data is validated and does not pass the validation.

| System action: The server deallocates the APPC/MVS conversation. The contact between either the Tivoli OPC
| dialog or the program interface application and the Tivoli OPC subsystem is thereby broken. The partner of the
| APPC/MVS conversation, a dialog user,
| User response: If the problem reoccurs, report the error to your IBM representative.
EQQPH06E A SERVER SUBTASK ABENDED. THE SUBTASK WAS CREATED FOR PROCESSING APPC/MVS
ALLOCATE DATA: FMH5 FMH52
Explanation: The Tivoli OPC server has created a subtask for processing requests from a remote dialog user or a
program interface application. The subtask has abended.

| System action: The server deallocates the APPC/MVS conversation. The contact between either the Tivoli OPC
| dialog or the program interface application and the Tivoli OPC subsystem is thereby broken.
| User response: If the problem reoccurs, report the error to your IBM representative.
| EQQPH07E A SERVER SUBTASK ABENDED. THE SUBTASK WAS CREATED TO PROCESS THE SOCKETS
|
CONNECTION
| Explanation: A Tivoli OPC server subtask was created to process requests from a remote dialog user using a
| TCP/IP connection. The subtask has abended.
| System action: The server closed the TCP/IP MVS connection, so contact between the Tivoli OPC dialog and the
| Tivoli OPC subsystem has been lost.
| User response: If the problems reoccurs, report the error to your IBM representative.
 Copyright IBM Corp. 1991, 1999

281

EQQPH08I EQQPH13E

| EQQPH08I TCP/IP IS EITHER INACTIVE OR NOT READY. CHECK THAT TCP/IP IS AVAILABLE
| Explanation: A Tivoli OPC server got an error when trying to communicate with TCP/IP.
| System action: The Tivoli OPC server stops processing.
| User response: Check that TCP/IP is available.
| EQQPH09I THE SERVER IS USING THE PROT PROTOCOL
| Explanation: A Tivoli OPC server is using the PROT protocol for communication.
| System action: None.
| EQQPH10E COMMUNICATION WITH USER USER AT LU LU FAILED, APPC/MVS SERVICE VERB REQUESTED
|
IN STATE STATE RETURN_CODE RC, STATUS_RECEIVED SR, DATA_RECEIVED DR
| Explanation: The APPC/MVS communication between a dialog user or program interface application and the Tivoli
| OPC server failed. An APPC/MVS service request issued by the server ended with a nonzero return code.
| System action: The server deallocates the APPC/MVS conversation. The contact between either the Tivoli OPC
| dialog or the program interface application and the Tivoli OPC subsystem is therby broken.
| System programmer response: Check the meaning of the APPC/MVS return codes. If the problem reoccurs,
| report the error to your IBM representative.
| EQQPH11E COMMUNICATION WITH USER USER AT LU LU FAILED, UNEXPECTED COMBINATION OF
|
RETURN VALUES APPC/MVS SERVICE VERB REQUESTED IN STATE STATE RETURN_CODE RC,
|
STATUS_RECEIVED SR, DATA_RECEIVED DR
| Explanation: The APPC/MVS communication between a dialog user or program interface application and the Tivoli
| OPC server failed. An APPC/MVS service request ended with a combination of return values that is not supported by
| the communication routines.
|
|
|
|
|
|

System action: The server deallocates the APPC/MVS conversation. The contact between either the Tivoli OPC
dialog or the program interface application and the Tivoli OPC subsystem is thereby broken. The partner of the
APPC/MVS conversation, a dialog user, or a program interface application, is informed about the error by message
EQQPH14 and an error return code. A Tivoli OPC dialog user gets message EQQPH14 displayed at the next
terminal action. A program interface application gets message EQQPH14 written to the message log of the program
interface job and the EQQYCOM call ends with a return code of 8.

| System programmer response: Check the meaning of the APPC/MVS return codes. If the problem reoccurs,
| report the error to your IBM representative.
| EQQPH12E COMMUNICATION WITH USER USER AT LU LU FAILED, INSUFFICIENT VIRTUAL STORAGE
|
AVAILABLE, DIAGNOSTIC INFO ALT
| Explanation: The APPC/MVS communication between a dialog user or program interface application and the Tivoli
| OPC server failed because of insufficient storage for the server task.
| System action: The server deallocates the APPC/MVS conversation. The contact between either the Tivoli OPC
| dialog or the program interface application and the Tivoli OPC subsystem is thereby broken.
| System programmer response: Stop the server, or the Tivoli OPC Controller if the message is in the Controller
| message log, and restart it in a larger region.
| EQQPH13E FAILED TO LOAD SERVICE MODULE MOD
| Explanation: A dialog user or a program interface application tries to invoke Tivoli OPC remotely. A Tivoli OPC
| server module required for the remote communication cannot be located.
| System action: The system waits for you to respond.
| System programmer response: Check that the module can be accessed. If the problem reoccurs, report the error
| to your IBM representative.

282

Tivoli OPC Messages and Codes

EQQPH15E EQQPH19E

| EQQPH15E COMMUNICATION FAILED. TCPIP SOCKET_CALL VERB CALLED IN STATE STATE INVALID
|
SOCKET CALL OR STATE SOCKET CALL RETURN_CODE RC, REASON_CODE RS
| Explanation: The TCP/IP connection between a dialog user and a Tivoli OPC server failed. Either the TCP/IP
| socket service or the connection subtask state is invalid.
| System action: The server closes the TCP/IP connection. Contact between the Tivoli OPC dialog and the Tivoli
| OPC subsystem is lost. The partner of the TCP/IP connection is informed about the error.
| User response: Report the error to your IBM representative.
| EQQPH16E COMMUNICATION FAILED. TCPIP SOCKET_CALL VERB FAILED IN STATE STATE
|
RETURN_CODE RC, REASON_CODE(ERRNO) RS
| Explanation: The TCP/IP connection between a dialog user and a Tivoli OPC server failed. A TCP/IP socket
| service call failed.
| System action: The server closes the TCP/IP connection. Contact between the Tivoli OPC dialog and the Tivoli
| OPC subsystem is lost. The partner of the TCP/IP connection is informed about the error.
| User response: Look at the TCP/IP return codes to discover the reason. If the problem reoccurs, report the error to
| your IBM representative.
| EQQPH17E COMMUNICATION FAILED, INSUFFICIENT VIRTUAL STORAGE AVAILABLE, DIAGNOSTIC INFO
|
ALT
| Explanation: The TCP/IP connection between a dialog user and a Tivoli OPC server failed due to insufficient
| storage for the server task.
| System action: The server deallocates the TCP/IP connection. Contact between the Tivoli OPC dialog and the
| Tivoli OPC subsystem is lost. The partner of the TCP/IP connection is informed about the error.
| User response: Stop the server and restart it in a larger region.
| EQQPH18E COMMUNICATION FAILED, THE FUNCTION SOCKET CALL FAILED WITH ERROR CODE ERRNO
| Explanation: The TCP/IP connection between a dialog user and a Tivoli OPC server failed. A TCP/IP socket
| service call failed.
| System action: If the TCP/IP connection is active, the connection is closed and contact between the Tivoli OPC
| dialog and the Tivoli OPC subsystem is lost.
|
|
|
|

User response: Look at the TCP/IP return codes to discover the reason. If the problem reoccurs, report the error to
your IBM representative. Typical examples are ERRNO=1011 (the DD card SYSTCP might be missing in the TCP/IP
started task), ERRNO=156 (the OMVS segments for the OPC server STC could not be defined), and ERRNO=13 (the
server is related to a different port number in the TCP/IP profile dataset).

| EQQPH19E COMMUNICATION FAILED, THE COMMUNICATION WAS TIMED OUT. COMMUNICATION CLOSED
| Explanation: The TCP/IP connection between a dialog user and a Tivoli OPC server was timed out. The connection
| was inactive for too long.
| System action: The server closes the TCP/IP connection. Contact between the Tivoli OPC dialog and the Tivoli
| OPC subsystem is lost. The partner of the TCP/IP connection is informed about the error. The Tivoli OPC server
| continues processing.
| User response: None.

Chapter 22. EQQPnnn Messages

283

EQQPH20E EQQPH26E

| EQQPH20E COMMUNICATION FAILED, A PROTOCOL ERROR WAS DETECTED BY THE OPC SERVER.
|
COMMUNICATION CLOSED
| Explanation: The TCP/IP connection between a dialog user and a Tivoli OPC server failed due to a server internal
| error.
| System action: The server closes the TCP/IP connection. Contact between the Tivoli OPC dialog and the Tivoli
| OPC subsystem is lost. The partner of the TCP/IP connection is informed about the error.
| User response: Report the error to your IBM representative.
| EQQPH21E TYPE IS NOT CORRECT. TYPE MUST BE IN THE RANGE FROM 0 TO 65535, DEFAULT TYPE
|
DEFAULT IS CURRENTLY USED.
| Explanation: An incorrect TYPE parameter value has been specified.
| System action: The TYPE parameter value is set to DEFAULT.
| User response: If you do not want to use the default value, check the TYPE value in the SERVOPTS statement. It
| must be within the range 0 to 65535.
| EQQPH22E COMMUNICATION FAILED, TCPIP SOCKET CALL VERB CALLED IN STATE STATE. UNEXPECTED
|
COMBINATION SOCKET CALL RETURN _CODE RC, REASON_CODE RS
| Explanation: The TCP/IP connection between a dialog user and a Tivoli OPC server failed.
| System action: The server closes the TCP/IP connection. Contact between the Tivoli OPC dialog and the Tivoli
| OPC subsystem is lost. The partner of the TCP/IP connection is informed about the error.
| User response: Report the error to your IBM representative.
| EQQPH23E NO DEFAULT CALENDAR IS SPECIFIED, IT IS REQUIRED WHEN PROTOCOL IS TCPIP.
| Explanation: The default calendar name is required by the Job Scheduling Console.
| System action: The server initialization is terminated.
| System programmer response: Make sure that the INIT statement is present in the server parameter library and
| that the CALENDAR keyword is specified.
| EQQPH24E REQUIRED PARAMETER PAR MISSING IN STMT STATEMENT
| Explanation: The required parameter is missing in the related statement of the server parameter file.
| System action: None.
| User response: Check the statement and correct the errors.
| EQQPH25E TME USER ID MISSING IN RACF CLASS TMEADMIN: USER
| Explanation: The server rejected the request for either of the following reasons:
|
|

The server table for the mapping of the Tivoli administrator and the RACF user ID does not exist.
The Tivoli administrator is not defined in the TMEADMIN mapping table.

| System action: None.
| User response: Check that the mapping table exists or that the Tivoli administrator is defined in the table. See the
| “Implementing Security in Tivoli OPC” chapter in Customization and Tuning.
| EQQPH26E TME USER ID MISSING IN TME USER TO RACF USER ID MAPPING TABLE: USER
| Explanation: The user ID is not defined in the server table containing the mappings from TME users to RACF users.
| System action: The server rejected the Tivoli Job Scheduling Console request.
| User response: Check the USERMAP parameter that identifies the mapping table in the SERVOPTS statement.
| Check the table entries and the user ID provided by the Tivoli Job Scheduling Console.

284

Tivoli OPC Messages and Codes

EQQPH27I EQQP012E

| EQQPH27I TYPE IS NOT SPECIFIED, DEFAULT TYPE DEFAULT IS CURRENTLY USED.
| Explanation: The TYPE parameter is missing. The default DEFAULT value is currently used.
| System action: The parameter TYPE is set to the DEFAULT value.
| User response: If you do not want to use the default value, enter a valid value for the parameter.
EQQP010E VERB in state STATE failed with RC RC, SR SR, DR DR
Explanation: An APPC/MVS service request issued for server communication failed. The verb VERB was issued
when the conversation was in state STATE. APPC/MVS returned: Return_Code RC, Status_Received SR and
Data_Received DR.
System action: The request is rejected.
User response: Check that the correct LU name is specified. For the dialog the LU name is set via the OPTIONS
menu. A program interface application sets the LU name through the EQQYPARM parameter file or through the INIT
request. Repeat the dialog action from the Tivoli OPC Primary Option panel or rerun the program interface
application.
System programmer response: Check the meaning of the APPC/MVS return codes. Check the message log of the
server for a message explaining the communication loss. If the problem reoccurs, report the error to your IBM
representative.
EQQP011E INSUFFICIENT VIRTUAL STORAGE, DIAGNOSTIC INFO ALT
Explanation: A routine for communication with the server failed because it could not obtain sufficient amount of
virtual storage.
System action: The request is rejected.
User response: Logon to TSO with a larger SIZE parameter value or rerun the program interface application with a
larger specified region
EQQP012E APPC/MVS VERB VERB FAILED WITH RC RC, SR SR, DR DR
Explanation: An APPC/MVS service request issued for server communication failed. The verb VERB was issued
when the conversation was in state STATE. APPC/MVS returned: Return_Code RC, Status_Received SR and
Data_Received DR.
System action: The request is rejected.
User response: Check that the correct LU name is specified. For the dialog the LU name is set via the OPTIONS
menu. A program interface application sets the LU name through the EQQYPARM parameter file or through the INIT
request. Repeat the dialog action from the Tivoli OPC Primary Option panel or rerun the program interface
application.
System programmer response: Check the meaning of the APPC/MVS return codes. Check the message log of the
server for a message explaining the communication loss. If the problem reoccurs, report the error to your IBM
representative.

Chapter 22. EQQPnnn Messages

285

EQQP014E EQQP015E

EQQP014E REQUEST FAILED, SEVERE ERROR AT THE SERVER, LU
Explanation: An error occurred at the server.
System action: The dialog or program interface application cannot continue.
System programmer response: Check the message log of the server for a message explaining the error at the
server.
User response: Check that the correct LU name is specified. For the dialog the LU name is set via the OPTIONS
menu. A program interface application sets the LU name through the EQQYPARM parameter file or through the INIT
request. Repeat the dialog action from the Tivoli OPC Primary Option panel or rerun the program interface
application.
System programmer response: Check the message log of the server for a message explaining the communication
problem. If the problem reoccurs, report the error to your IBM representative.
EQQP015E FAILED TO SET UP COMMUNICATION WITH SERVER LU, RC RC
Explanation: An APPC/MVS allocate request issued for server communication failed. LU shows the LU name of the
server. RC shows the return code of the allocate request.
System action: The user cannot start the Tivoli OPC dialog. The INIT request of program interface application gets
a return code of 8.
User response: Check that the correct LU name is specified and that LU is active. For the dialog the LU name is
set via the OPTIONS menu. A program interface application sets the LU name through the EQQYPARM parameter
file or through the INIT request. Repeat the dialog action from the Tivoli OPC Primary Option panel or rerun the
program interface application.

286

Tivoli OPC Messages and Codes

EQQQ002E EQQQ010E

Chapter 23. EQQQnnn Messages
EQQQ002E THE SPECIAL RESOURCE GROUP IS INVALID
Explanation: You have entered a group ID that contains invalid characters.
System action: The request is rejected.
User response: Change the group ID so that it contains national characters or any character in the range A–Z or
0–9.
EQQQ004E THE ENTRY IS INVALID, ENTER EITHER A OCHCYES OR A OCHCNO
Explanation: You have entered an invalid character in the field. It must be either a OCHCYES or a OCHCNO.
System action: The request is rejected.
User response: Change the character to a OCHCYES or a OCHCNO.
EQQQ005E THE ENTRY MUST NOT BE BLANK
Explanation: You must not leave this field blank.
System action: The request is rejected.
User response: Change the field to a nonblank value.
EQQQ006E THE ENTRY IS INVALID, ENTER A VALUE IN THE RANGE 1 TO 999999
Explanation: You have entered an invalid quantity in the field. It must be in the range 1–999999.
System action: The request is rejected.
User response: Change the quantity to a valid value.
EQQQ007E THE ENTRY IS INVALID, ENTER OSROEF, OSROEFS, OSROEFX, OSROEK OR BLANK.
Explanation: You have entered an invalid keep on error option.
System action: The request is rejected.
User response: Change the entry to a valid value.
EQQQ008E THE MEMBER NAME IS NOT IN A VALID ISPF FORMAT
Explanation: You have entered an invalid name.
System action: The request is rejected.
User response: Change the name to a format recognised by ISPF.
EQQQ009E THE DAY ENTERED IS INVALID
Explanation: You have entered an invalid day. Enter either a valid day or a valid date.
System action: The request is rejected.
User response: Enter a valid value.
EQQQ010E THE INTERVAL OVERLAPS WITH A PRIOR INTERVAL
Explanation: You have entered a combination of day/date and time that is invalid because it overlaps another
interval.
System action: The request is rejected.
User response: Correct the day/date or time, or both.

 Copyright IBM Corp. 1991, 1999

287

EQQQ011E EQQQ021E

EQQQ011E THE TO TIME MUST BE GREATER THAN THE FROM TIME
Explanation: You have entered an invalid combination of to-time and from-time.
System action: The request is rejected.
User response: Ensure that the to-time is greater than the from-time.
EQQQ012E 24.00 IS NOT ALLOWED AS TO TIME
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Valid to-times are 00.00 through 23.59.
EQQQ013W THE SELECTED OPERATION COULD NOT BE FOUND IN THE CURRENT PLAN
Explanation: You have selected to view an operation that no longer exists in the current plan.
System action: The request is rejected.
User response: Refresh the list of operations and select another operation.
EQQQ014W THE SELECTED OPERATION IS NO LONGER IN THE QUEUE OR LIST
Explanation: You have requested to delete an operation from the queue or list that no longer exists in the queue or
list.
System action: The request is rejected.
User response: Refresh the list of operations and select another operation.
EQQQ015E THE ENTRY IS INVALID, ENTER S OR LEAVE BLANK
Explanation: You have entered an invalid value in the rules field.
System action: The request is rejected.
User response: Change the field to one of the valid values.
EQQQ017E THE ENTRY IS INVALID, ENTER A DAY IN THE RANGE 1 TO 366
Explanation: You have entered an invalid day in the field. It must be in the range 1–366.
System action: The request is rejected.
User response: Change the day to a valid value.
EQQQ019E THE ENTRY IS INVALID, ENTER A VALUE IN THE RANGE -999999 TO 999999
Explanation: You have entered an invalid deviation in the field. It must be in the range −999999 to 999999.
System action: The request is rejected.
User response: Change the quantity to a valid value.
EQQQ021E 00.00 IS NOT ALLOWED AS FROM TIME
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Valid from-times are 00.01 through 24.00.

288

Tivoli OPC Messages and Codes

EQQQ022W EQQQ029I

EQQQ022W THE WORK STATION DOES NOT EXIST
Explanation: You have entered the name of a workstation that does not exist.
System action: The panel is redisplayed so that you can press End again and confirm that the workstation does not
exist.
User response: Change the workstation to one that exists, define the work station, blank the field out, or ignore the
warning.
EQQQ023E THE WORK STATION IS ALREADY INCLUDED
Explanation: You have entered a workstation that has already been defined as connected to the resource.
System action: The request is rejected.
User response: Remove the duplicate workstation name.
EQQQ024I THE SPECIAL RESOURCE HAS NO OPERATIONS FOR YOU TO EXAMINE
Explanation: You have attempted to access either the in-use list or waiting queue for a special resource and it has
no operations either using or waiting for it.
System action: The request is rejected.
User response: Choose another special resource.
EQQQ025E THE ENTRY IS INVALID, IT MUST BE OCHCYES, OCHCNO OR LEFT BLANK
Explanation: You have entered an invalid value in the On Error field.
System action: The request is rejected.
User response: Change the field to one of the valid values.
EQQQ026E THE WORK STATION CONTAINS INVALID CHARACTERS
Explanation: You have entered the name of a workstation that contains invalid characters. The first character must
be a national character, an alphabetic character, or one of the Tivoli OPC generic selection characters. The
remainder of the workstation name must consist of alphanumeric characters, national characters or Tivoli OPC generic
search characters.
System action: The panel is redisplayed forcing you to change the entry.
User response: Change the workstation name to one that contains valid characters.
EQQQ028I NO DEFAULT WS CONNECT LIST HAS BEEN DEFINED
Explanation: You have attempted to access the list of connected workstations that acts as the defaults, but none
have been defined.
System action: The request is rejected.
User response: If they are required, define a list of connected workstations to be used as defaults.
EQQQ029I WS CONNECT LIST NOT DEFINED FOR THIS INTERVAL, DEFAULTS WILL BE USED
Explanation: You have attempted to access the list of connected workstations in an interval for which no list has
been defined. The default connected workstations that are defined for this special resource are used.
System action: The request is rejected.
User response: If the default list should not be used, define a list of connected workstations for this interval.

Chapter 23. EQQQnnn Messages

289

EQQQ030I EQQQ038E

EQQQ030I THE SPECIAL RESOURCE HAS NO INTERVALS FOR YOU TO BROWSE
Explanation: You have attempted to access the list of intervals, but none have been defined.
System action: The request is rejected.
User response: If they are required, define a list of intervals.
EQQQ031E THE SPECIAL RESOURCE IS BEING UPDATED BY ANOTHER USER
Explanation: You have attempted to access a special resource that is currently locked by another user.
System action: The system waits for you to respond.
User response: Try to update the special resource later.
EQQQ032I THE SPECIAL RESOURCE HAS BEEN SUCCESSFULLY CREATED
Explanation: The special resource has been created and stored.
System action: Processing continues.
User response: None.
EQQQ033I THE SPECIAL RESOURCE HAS BEEN SUCCESSFULLY MODIFIED
Explanation: The special resource has been modified and stored.
System action: Processing continues.
User response: None.
EQQQ034I THE SPECIAL RESOURCE HAS BEEN SUCCESSFULLY DELETED
Explanation: The special resource has been deleted and removed.
System action: Processing continues.
User response: None.
EQQQ035E INVALID ENTRY, ENTER OCHCCNTL, OCHCPLAN, OCHCBOTH, OR OCHCNONE
Explanation: You have entered an invalid value in the usage field.
System action: The request is rejected.
User response: Change the field to one of the valid values.
EQQQ036E YOU ARE NOT AUTHORIZED TO ACCESS THE SR
Explanation: You have attempted to access the special resource database for the modify current plan, but you are
not authorized to access it.
System action: The request is rejected.
User response: If you require access, contact your security administrator.
EQQQ038E A SPECIAL RESOURCE WITH THIS NAME ALREADY EXISTS
Explanation: You have attempted to create a special resource that already exists.
System action: The request is rejected.
User response: Change the special resource name to a unique name.

290

Tivoli OPC Messages and Codes

EQQQ039E EQQQ501E

EQQQ039E YOU ARE NOT AUTHORIZED TO ACCESS THE RD
Explanation: You have attempted to access the special resource description (RD) database, but you are not
authorized to access it.
System action: The request is rejected.
User response: If you require access, contact your security administrator.
EQQQ040I THE SPECIAL RESOURCE IS NOT CURRENTLY ALLOCATED TO ANY OPERATIONS
Explanation: The special resource has no operations in the current plan that are currently allocated to it.
System action: The system waits for you to respond.
User response: The special resource has no in-use list. Select another special resource.
EQQQ041I THERE ARE NO OPERATIONS WAITING TO ALLOCATE THE SPECIAL RESOURCE
Explanation: The special resource has no operations in the current plan that are currently waiting for it.
System action: The system waits for you to respond.
User response: The special resource has no waiting queue. Select another special resource.
EQQQ043I NO MATCHING SPECIAL RESOURCE(S) FOUND
Explanation: No special resource (or resources) matched the generic or nongeneric search criteria that you specified
to generate a list of special resources.
System action: The system waits for you to respond.
User response: Retry, using new selection criteria.
EQQQ044W THE SPECIAL RESOURCE WAS NOT FOUND
Explanation: The special resource could not be found.
System action: The request is rejected.
User response: Select another special resource.
EQQQ500I SPECIAL RESOURCE DATASPACE HAS BEEN SUCCESSFULLY DELETED
Explanation: Tivoli OPC successfully deleted the special resource data space.
System action: Normal Tivoli OPC processing continues.
User response: None.
EQQQ501E SPECIAL RESOURCE DATASPACE DELETE FAILED. REASON CODE IS REASON
Explanation: Tivoli OPC could not delete the special resource data space. The storage is not freed.
System action: Normal Tivoli OPC processing continues.
Problem determination: Use the reason code REASON from DSPSERV to determine the cause of the error. Refer
to the MVS documentation that describes DSPSERV reason codes.
System programmer response: Perform the actions described for the DSPSERV reason code.

Chapter 23. EQQQnnn Messages

291

EQQQ502I EQQQ505E

EQQQ502I SPECIAL RESOURCE DATASPACE HAS BEEN CREATED.
SIZE PAGES ARE USED FOR NUM SPECIAL RESOURCE RECORDS
Explanation: A data space has been successfully created for special resource records. SIZE shows the number of
pages (each 4096 bytes) used to create the data space. NUM shows the maximum number of special resource
records that the data space can contain.
Tivoli OPC uses a minimum of 20 pages.
System action: Normal processing continues. Tivoli OPC uses the data space when accessing special resources.
System programmer response: None.
EQQQ503E SPECIAL RESOURCE DATASPACE CREATION FAILED. REASON CODE IS REASON. SIZE PAGES
WERE REQUESTED FOR NUM SPECIAL RESOURCES
Explanation: Tivoli OPC could not create a data space for special resource storage. Reason code REASON is set
by the DSPSERV service. SIZE shows the number of pages (each 4096 bytes) that Tivoli OPC needed. NUM shows
the number of special resource records that Tivoli OPC wanted to store in the data space.
System action: If the error occurred in batch, the batch program terminates. If the error occurred in the controller,
the normal mode manager (NMM) terminates.
Problem determination: Use the reason code REASON from DSPSERV to determine the cause of the error. Refer
to the MVS documentation that describes DSPSERV reason codes.
System programmer response: Correct the error and restart the NMM subtask or, if the error occurred in batch,
resubmit the batch job.
EQQQ504I STAT SPECIAL RESOURCE RESNAME HAS BEEN DYNAMICALLY ADDED BY USER
Explanation: A requested special resource RESNAME did not exist in the current plan, but has been dynamically
added to the special resource data space by you or by the function USER. Status STAT=NEW means that the special
resource did not previously exist in the resource description (RD) database. Status STAT=OLD means that the
special resource had already been defined.
Note: If the special resource already exists in the RD database, the DYNAMICADD keyword of the RESOPTS
statement has no effect.
This message can be issued at daily planning, when an operation becomes ready or when a special resource event
record is processed.
System action: Normal processing continues. If another operation allocates the special resource with a larger value
or to avoid contention, Tivoli OPC increases the quantity of a dynamically created special resource.
User response: None.
EQQQ505E UNSUCCESSFUL DATASPACE ACCESS REQUEST, INFORMATION FOLLOWS:
ACCESS REQUEST IS FROM MODID , REASON CODE IS RSN ,
REQUESTED FUNCTION IS FUNC , INDEX NUMBER IS INDEX
Explanation: A Tivoli OPC subtask encountered an unexpected error when accessing a resource in the resource
data space.
System action: The messages that follow this message in the Tivoli OPC message log indicate the action taken by
the Tivoli OPC subtask.
System programmer response: Correct the error and, if necessary, restart the subtask that encountered the error.

292

Tivoli OPC Messages and Codes

EQQQ506I EQQQ510W

EQQQ506I SPECIAL RESOURCE DATASPACE HAS BEEN EXTENDED
SIZE PAGES ARE USED FOR NUM SPECIAL RESOURCE RECORDS
Explanation: A data space for special resource records has been successfully extended. SIZE shows the number of
pages (each 4096 bytes) to which the data space was extended. NUM shows the maximum number of special
resource records that the data space can contain.
System action: Normal processing continues. Tivoli OPC uses the data space when accessing special resources.
System programmer response: None.
EQQQ507I A SPECIAL RESOURCE DATASPACE BACKUP PROCESS HAS STARTED
Explanation: The normal mode manager has started a current plan copy process. This copy process causes a
backup of the special resource data space. Updated records in the data space are written to the current plan
extension dataset (EQQCXDS).
System action: Normal processing continues.
System programmer response: None.
EQQQ508I A SPECIAL RESOURCE DATASPACE BACKUP PROCESS HAS ENDED
NUM RECORDS WERE WRITTEN TO CX
Explanation: The normal mode manager has successfully written all updated records from the special resource data
space to the current plan extension dataset (EQQCXDS).
System action: Normal processing continues.
System programmer response: None.
EQQQ509E A SPECIAL RESOURCE DATASPACE BACKUP PROCESS HAS FAILED
Explanation: The normal mode manager (NMM) could not write all updated records in the special resource data
space to the current plan extension dataset (EQQCXDS).
System action: The NMM subtask is terminated.
Problem determination: Review earlier messages in the Tivoli OPC message log to determine the reason for this
message.
System programmer response: Correct the error and restart the NMM subtask.
EQQQ510W SPECIAL RESOURCE RESNAME WAS NOT DYNAMICALLY ADDED
Explanation: A special resource dynamic add request has been rejected. The reason is either of the following:
An SRSTAT command specifying a special resource that does not exist and DYNAMICADD is not set to OPER or
NO.
A job that refers to a special resource that does not exist is about to be submitted and DYNAMICADD is not set to
EVENT or NO.
System action: Processing continues and any operations that refer to this special resource are not submitted.
User response: Add the special resource manually or delete the special resource reference from the operation.
System programmer response: None.

Chapter 23. EQQQnnn Messages

293

EQQQ511W EQQQ515W

EQQQ511W RESOURCE: RESNAME IS TOO LARGE.
THE LAST INTERVAL USED STARTS AT DATE TIME
Explanation: This message is issued to the message log when a special resource is too large to fit into the CX file.
System action: The special resource record is truncated to fit into the CX file. The start time of the last interval
used in the record is displayed in the message.
User response: Allocate the CX file with a larger record size or change the special resource description so that it
uses less intervals.
EQQQ515W OPERATION ADID OPID, JOBN IA IADATE IATIME HAS WAITED FOR
RESOURCE RES FOR CTIME MINUTES
Explanation: This message is issued by the controller when an operation has waited a longer time to allocate a
given resource than the time specified in the RESOPTS CONTENTIONTIME parameter value. The message
variables are:

ADID
OPID
JOBN
IADATE
IATIME
RES
CTIME

Application ID of operation.
Workstation name and operation number.
Jobname of the operation or blank if no jobname is defined.
Input arrival date of the operation.
Input arrival time of the operation.
Name of the special resource that the operation has requested.
The time now spent on the waiting queue

System action: Processing continues. The operation remains on the waiting queue for the required resource.
User response: Use the dialog to inspect the special resource queues for the special resource indicated by the
message. If the situation needs to be corrected, modify the queues or the operations.

294

Tivoli OPC Messages and Codes

EQQRM01I EQQRM07W

Chapter 24. EQQRMnn Messages
EQQRM01I RODM SUBTASK INITIALIZATION IS COMPLETE
Explanation: The RODM subtask has completed initialization processing.
System action: Processing continues.
Operator response: None.
EQQRM02E RODM SUBTASK ABENDED WHEN PROCESSING THE FOLLOWING QUEUE ELEMENT DQE
Explanation: An abend prevented the RODM subtask from processing a queue element.
System action: MVS recovery/termination is requested to generate a dump. The RODM subtask restarts, and
resumes normal processing.
Problem determination: Review the Tivoli OPC message log dataset (EQQMLOG), the diagnostic dataset
(EQQDUMP), and the system dump dataset to determine the cause of the error.
System programmer response: Save the EQQMLOG, EQQDUMP, and system dump datasets and contact your
IBM representative.
EQQRM03W RODM CONNECT FAILED FOR RODM SUBSYSTEM NAME. RC IS RC, RSN IS RSN
Explanation: A nonzero return code was returned by the RODM subsystem NAME when the RODM subtask called
the RODM API to connect.
System action: The RODM subtask attempts to connect to this RODM subsystem repeatedly until the connection
succeeds or the RODM subtask is stopped.
System programmer response: Make sure that the RODMSYS keyword is specified correctly, and if so, that the
specified RODM subsystem has started successfully. Refer to the RODM Programming Guide for more information
about return codes and reason codes used by the RODM API.
EQQRM04W RODM CONNECT FAILED DUE TO RODM ERROR FOR SYSTEM
Explanation: The RODM subtask has not been able to connect to the specified RODM subsystem.
System action: The OPCRESOURCE/OPCFIELD specified on the RODMOPTS statement referring to this RODM
subsystem is set to Inactive and processing continues. Attempts to connect to this RODM subsystem are initiated
every five minutes.
System programmer response: Make sure that the RODM subsystem is properly initialized.
EQQRM05I INITIALIZATION FAILED - SUBSYSTEM STOP REQUESTED
Explanation: A stop subsystem command was issued while the RODM subtask was initializing. This caused the
subtask to end.
System action: The Tivoli OPC subsystem continues the shutdown sequence.
User response: None.
EQQRM07W THE RODM SUBTASK IGNORED THE FOLLOWING ELEMENT ON THE RODM QUEUE DQE
Explanation: An invalid subscription request was found on the RODM queue.
System action: Processing continues.
System programmer response: Contact your IBM representative.

 Copyright IBM Corp. 1991, 1999

295

EQQRM09E EQQRM16I

EQQRM09E RODM SUBTASK QUEUE POINTERS ARE DESTROYED, RODQ IS LOST
Explanation: The RODM subtask abended while processing elements on APPQ because the queue chaining is
invalid.
System action: MVS recovery/termination is requested to generate a dump. The RODM subtask restarts and
resumes normal processing.
Problem determination: Review the Tivoli OPC message log dataset (EQQMLOG), the diagnostic dataset
(EQQDUMP), and the system dump dataset to determine the cause of the error.
System programmer response: Save the EQQMLOG, EQQDUMP, and system dump datasets and contact your
IBM representative.
EQQRM11E RODM INTERFACE MODULE EKGUAPI COULD NOT BE LOADED
Explanation: A RODM interface module was not found in the library search path.
System action: Tivoli OPC continues, but the RODM functions as requested by RODMOPTS keywords referring to
this destination are disabled.
System programmer response: Make sure that the RODM interface modules can be accessed, either via the
LINKLST or in the STEPLIB concatenation, and restart Tivoli OPC
EQQRM12W OPC RESOURCE UNKNOWN NAME
Explanation: A RODMOPTS statement specifies a resource unknown to Tivoli OPC.
System action: This RODMOPTS statement is ignored. Processing continues. The status is set to Inactive.
System programmer response: Specify a valid resource name or add the resource to Tivoli OPC.
EQQRM13E OPC RESOURCE FIELD UNKNOWN NAME
Explanation: A RODMOPTS statement specifies a resource field unknown to Tivoli OPC.
System action: RODM subtask initialization fails and the controller is shut down.
System programmer response: Specify a valid resource field name and restart the controller.
EQQRM14W RODM OBJECT UNKNOWN NAME
Explanation: A RODMOPTS statement specifies a RODM object that is unknown to Tivoli OPC.
System action: The OPCRESOURCE/OPCFIELD specified on the RODMOPTS statement referring to this RODM
OBJECT is set to Inactive and processing continues. New subscription attempts are performed every five minutes.
System programmer response: Specify a valid object name or add the object to the RODM subsystem.
EQQRM15W RODM OBJECT FIELD UNKNOWN NAME
Explanation: A RODMOPTS statement specifies a RODM field that is unknown to Tivoli OPC.
System action: The OPCRESOURCE/OPCFIELD specified on the RODMOPTS statement referring to this RODM
FIELD is set to Inactive and processing continues.
System programmer response: Specify a valid RODM field name or add the field to the object in the RODM
subsystem.
EQQRM16I CONNECTION ESTABLISHED TO RODM SUBSYSTEM: NAME
Explanation: Tivoli OPC has connected to a RODM subsystem.
System action: Processing continues.
User response: None.

296

Tivoli OPC Messages and Codes

EQQRM17W EQQRM22W

EQQRM17W CONNECTION LOST TO RODM SUBSYSTEM: NAME
Explanation: Tivoli OPC has lost the connection to a RODM subsystem.
System action: Processing continues. The status for all resources being monitored by the named RODM
subsystem is set to Inactive and the values of the corresponding Tivoli OPC resource fields are set according to the
RODMLOST values in the RODMOPTS statements. Attempts to reconnect to this RODM subsystem are initiated
every five minutes.
User response: None.
EQQRM18E INVALID TRANSLATION VALUE TYPE VALUE SPECIFIED FOR OPC RESOURCE NAME
Explanation: A RODMOPTS statement specifies an invalid TRANSLATE value.
System action: RODM subtask initialization fails and the controller is shut down.
System programmer response: Specify a valid value in the TRANSLATE ordered list and restart the controller.
EQQRM19E INVALID RODMLOST VALUE VALUE SPECIFIED FOR OPC RESOURCE NAME
Explanation: A RODMOPTS statement specifies an invalid RODMLOST value.
System action: RODM subtask initialization fails and the controller is shut down.
System programmer response: Specify a valid value in the RODMLOST keyword and restart the controller.
EQQRM20E DESTINATION UNKNOWN DNAME
Explanation: A RODMOPTS statement specifies a destination that is unknown to Tivoli OPC.
System action: RODM subtask initialization fails and the controller is shut down.
System programmer response: Specify a valid destination name and restart the controller.
EQQRM21W THE AVAILABILITY OF A SPECIAL RESOURCE COULD NOT BE DETERMINED FROM A RODM
OBJECT. RESOURCE NAME IS NAME
Explanation: A RODMOPTS statement specifies that the availability of a special resource should be updated by a
field in a RODM object. Tivoli OPC cannot determine whether the special resource is available or not because the
value of the field is not Y, N, or a value that can be translated to Y or N.
System action: The availability of the special resource is not changed. The RODM subtask continues normal
processing.
System programmer response: Verify that the RODM object has been correctly updated. Verify that the
RODMOPTS statement refers to the correct RODM object.
EQQRM22W A SPECIAL RESOURCE QUANTITY COULD NOT BE DETERMINED FROM A RODM OBJECT.
RESOURCE NAME IS NAME
Explanation: A RODMOPTS statement specifies that a special resource quantity should be updated by a field in a
RODM object. However, the value of the field is not within the valid range of special resource quantities. The valid
range is 0–999 999.
System action: The special resource quantity is not changed. The RODM subtask continues normal processing.
System programmer response: Verify that the RODM object has been correctly updated. Verify that the
RODMOPTS statement refers to the correct RODM object.

Chapter 24. EQQRMnn Messages

297

EQQRM23W EQQRM28W

EQQRM23W A SPECIAL RESOURCE DEVIATION COULD NOT BE DETERMINED FROM A RODM OBJECT.
RESOURCE NAME IS NAME
Explanation: A RODMOPTS statement specifies that a special resource deviation quantity should be updated by a
field in a RODM object. However, the value of the field is not within the valid range of special resource deviations.
The valid range is −999999 through 999999.
System action: The special resource quantity is not changed. The RODM subtask continues normal processing.
System programmer response: Verify that the RODM object has been correctly updated. Verify that the
RODMOPTS statement refers to the correct RODM object.
EQQRM24W SUBSCRIBE FOR RODM OBJECT NAME FAILED. RETURN CODE IS RC, REASON IS RSN
Explanation: A nonzero return code was returned by a RODM subsystem when the RODM subtask called the
RODM API to add a notify subscription.
System action: The RODM subtask continues normally. If the RODM object is modified later, the RODM subtask is
not notified and the corresponding Tivoli OPC resource is not updated.
System programmer response: Make sure that the current field in the RODM object has a notify subfield. Refer to
the RODM Programming Guide for more information about return codes and reason codes used by the RODM API.
EQQRM25I SUBSCRIBE FOR RODM OBJECT NAME WAS SUCCESSFUL
Explanation: A zero return code was returned by a RODM subsystem when the RODM subtask called the RODM
API to add a notify subscription.
System action: The RODM subtask continues normally. If the RODM class is modified later, the RODM subtask is
notified and the corresponding Tivoli OPC resource is updated.
System programmer response: None.
EQQRM26W SUBSCRIBE FOR RODM CLASS NAME FAILED. RETURN CODE IS RC, REASON IS RSN
Explanation: A nonzero return code was returned by a RODM subsystem when the RODM subtask called the
RODM API to add a notify subscription.
System action: The RODM subtask continues normally. If the RODM class is modified later, the RODM subtask is
not notified and the corresponding Tivoli OPC resource is not updated.
System programmer response: Make sure that the current field in the RODM class has a notify subfield. Refer to
the RODM Programming Guide for more information about return codes and reason codes used by the API.
EQQRM27I SUBSCRIBE FOR RODM CLASS NAME WAS SUCCESSFUL
Explanation: A zero return code was returned by a RODM subsystem when the RODM subtask called the RODM
API to add a notify subscription.
System action: The RODM subtask continues normally. If the RODM class is modified later, the RODM subtask is
notified and the corresponding Tivoli OPC resource is updated.
System programmer response: None.
EQQRM28W SUBSCRIBE FOR RODM OBJECT NAME FAILED. RETURN CODE IS RC, REASON IS RSN OPC
WILL RETRY EVERY 3 MINUTES
Explanation: A nonzero return code was returned by a RODM subsystem when the RODM subtask called the
RODM API to add a notify subscription for a RODM object.
System action: The RODM subtask continues normally. Tivoli OPC tries again after three minutes to add the notify
subscription for the RODM object.
System programmer response: None.

298

Tivoli OPC Messages and Codes

EQQRM29W EQQRM29W

EQQRM29W SUBSCRIBE FOR RODM CLASS NAME FAILED. RETURN CODE IS RC, REASON IS RSN OPC
WILL RETRY EVERY 3 MINUTES
Explanation: A nonzero return code was returned by a RODM subsystem when the RODM subtask called the
RODM API to add a notify subscription for a RODM class.
System action: The RODM subtask continues normally. Tivoli OPC tries again after three minutes to add the notify
subscription for the RODM object.
System programmer response: None.

Chapter 24. EQQRMnn Messages

299

300

Tivoli OPC Messages and Codes

EQQR000E EQQR013E

Chapter 25. EQQRnnn Messages
EQQR000E YOU ARE NOT AUTHORIZED TO ACCESS THE READY LIST
Explanation: You have attempted to access the ready list, but you are not authorized to access it.
System action: The requested access to the ready list is rejected.
User response: If you require access to the ready list, contact your security administrator.
EQQR008E YOU ARE NOT AUTHORIZED TO ACCESS THE JS DATA SET
Explanation: You have attempted to access the job setup facility, but you are not authorized to access it.
System action: The requested access to the job setup facility is rejected.
User response: If you want only to browse the JCL, you need read access authority. If you want to update the JCL,
you need update access authority. Contact your security administrator.
EQQR010I ERDR ERC# TERMINATED
Explanation: Event reader ERC processing has completed and control is returned to the Tivoli OPC subsystem.
System action: Event reader ERC processing is terminated.
User response: None.
EQQR011I EVENT READER ERC# HAS BEEN REQUESTED TO STOP
Explanation: Event reader ERC. has been requested to stop while waiting for positioning information in the event
dataset to become available.
System action: The event reader frees all acquired resources and is terminated.
System programmer response: None.
EQQR012I ERDR ERC# RESTARTED
Explanation: Event reader ERC has been restarted. This message is issued only for event readers that service the
NCF application at remote sites. The probable reason is that the event reader is restarted either with new positions in
the event dataset after a control plan refresh or when an NCF session is reestablished after failure.
System action: Event reader ERC restart processing continues.
User response: None.
EQQR013E ERDR UNABLE TO LOAD MODULE EQQERBEX - INITIALIZATION IS TERMINATED
Explanation: An event reader task was unable to locate the EQQERBEX load module.
System action: The event reader initialization is terminated.
System programmer response: Stop the event readers using the MODIFY command. Make sure that the
EQQERBEX module resides in a load library that can be accessed by Tivoli OPC and restart the event readers.

 Copyright IBM Corp. 1991, 1999

301

EQQR014W EQQR023E

EQQR014W ERDR ERC# NO VALID HEADER IN EVENT DATA SET WITH DDNAME DDN
Explanation: Event reader ERC encountered a header record that contained invalid information, for example, the
track capacity and the total number of records in the dataset were missing. The most probable reason is that a new
event dataset has been created and it is being formatted by the event writer before usage. The header record is not
updated with the characteristics of the dataset until the formatting job has completed. This might take some time if the
event dataset is large.
System action: Event reader ERC processing continues. It makes a new attempt to extract valid information from
the header record every 10 seconds. This message is written on the Tivoli OPC message log every two minutes until
a valid header is read or until the Tivoli OPC subsystem posts a stop request.
Problem determination: If this message appears more than 10 times on the Tivoli OPC message log dataset, stop
the event readers. Check that the DDN ddname connects to the correct event dataset, and if so, find out why the
header record is not valid.
System programmer response: Use the MODIFY command to stop the event readers, correct the error, and restart
the event readers.
EQQR015E SEQUENCE NUMBER SEQNO IS ALREADY IN USE BY AN EVENT WRITER SUBTASK
Explanation: At event reader initialization, an event writer was already started with the sequence number specified in
the ERSEQNO keyword of ERDROPTS.
The number specified in the ERSEQNO keyword of ERDROPTS must be unique within the Tivoli OPC subsystem.
System action: The event reader initialization fails. The event reader subtask is terminated.
Tivoli OPC administrator response: Update the ERSEQNO keyword with a unique sequence number and restart
the event reader subtask.
EQQR021E ERDR ERC# UNABLE TO OPEN EVENT DATA SET WITH DDNAME DDN
Explanation: Event reader ERC could not open its associated input dataset (ddname DDN).
System action: Event reader ERC processing is terminated.
Problem determination: Verify that the ddname statement associated with this event reader is correctly specified.
The ddname is EQQEVDxx, where xx should be equal to ERC.
System programmer response: Use the MODIFY command to stop the event readers, correct the errors, if any,
and restart the event readers.
EQQR023E ERDR ERC# RECORDS OVERWRITTEN ON EVENT DATA SET (DDNAME DDN) LR# EVENTS HAVE
BEEN LOST
Explanation: Event reader ERC encountered a situation where the event writer overwrites event records not yet
processed by the event reader. Event datasets are used in a wrap-around fashion and for some reason the event
reader cannot keep up with the event writer.
System action: Event reader ERC processing continues. The event records that were overwritten (LR) are lost and
cannot be recaptured.
Problem determination: The problem is probably one of the following:
An inadequate allocation in the event dataset, so that it wraps around too fast.
The wait interval (ERWAIT of the ERDROPTS statement) is too long, that is, the event reader waits too long
between successive read attempts.
You should also check the dispatching priority of the reader task to make sure that its priority is similar to that of the
event writer.
User response: Contact your system programmer.
System programmer response: Use the MODIFY command to stop the event readers, modify the appropriate
parameters, and restart the event readers.

302

Tivoli OPC Messages and Codes

EQQR024E EQQR029E

EQQR024E ERDR ERC# TERMINATION DUE TO INITIALIZATION FAILURE
Explanation: Event reader ERC has encountered initialization errors.
System action: Event reader ERC processing is terminated.
Problem determination: This message is preceded by other messages in the Tivoli OPC message log. They
indicate the exact reason for the failure.
System programmer response: Use the MODIFY command to stop the event readers, correct the errors, if any,
and restart the event readers.
EQQR025I ERDR ERC# STARTED
Explanation: Event reader ERC has successfully completed its initialization processing and is now ready.
System action: Event reader ERC processing continues.
EQQR026E ERDR ERC# I/O-ERROR ON EVENT DATA SET WITH DDNAME DDN - SYNAD INFORMATION:
SYNADMSG
Explanation: Event reader ERC encountered an I/O error when reading its associated event dataset (ddname DDN).
The event dataset is defined on the DDN ddname statement.
System action: Event reader ERC processing is terminated.
Problem determination: The SYNAD routine collects information such as jobname, stepname, unit address, device
type, ddname, operation, error description, and access method. The SYNADAF macro is used to extract this
information. For a detailed description of the layout refer to the appropriate documentation for the MVS/DFP product
installed on this MVS/ESA system.
System programmer response: Either correct the error and use the MODIFY command to restart the event readers
or stop Tivoli OPC, correct the error and restart Tivoli OPC.
EQQR027E ERDR ERC# INITIALIZATION FAILED - KEYWORD SPECIFICATION MISSING
Explanation: Event reader ERC found that the KEYWORD keyword was not specified on the ERDROPTS
statement.
System action: Event reader ERC processing is terminated.
System programmer response: Use the MODIFY command to stop the event readers, correct the errors, if any,
and restart the event readers.
EQQR028E ERDR ERC# INITIALIZATION FAILED - KEYWORD SPECIFICATION INVALID
Explanation: Event reader ERC found that the keyword KEYWORD was not specified correctly on the ERDROPTS
statement. If the ERSEQNO keyword specification was in error, ERC consists of **.
System action: Event reader ERC processing is terminated.
System programmer response: Use the MODIFY command to stop the event readers, correct the errors, if any,
and restart the event readers.
EQQR029E ERDR ERC# INITIALIZATION FAILED - NO ERDROPTS STATEMENT SPECIFIED
Explanation: Event reader ERC found no ERDROPTS statement in the member (specified on the OPCOPTS
statement) that was to hold initialization parameters for an event reader. Because no event reader sequence number
is available, ERC consists of **.
System action: Event reader ERC processing is terminated.
Problem determination: The Tivoli OPC message log contains messages that identify the parameter member that is
in error.
System programmer response: Use the MODIFY command to stop the event readers, add a correct ERDROPTS
statement to the member in error, and restart the event readers.

Chapter 25. EQQRnnn Messages

303

EQQR101E EQQR108W

EQQR101E THE LAYOUT RLLAYOUT CANNOT BE ADDED TO THE LAYOUT TABLE
Explanation: The ready list layout table already contains the layout that you tried to add.
System action: The ready list layout table is not updated.
User response: Change the layout name and repeat the request.
EQQR102I THE LAYOUT RLLAYOUT HAS BEEN ADDED TO THE LAYOUT TABLE
Explanation: The layout has been successfully added to the ready list layout table and saved.
System action: The ready list layout table is updated.
User response: None.
EQQR103I THE LAYOUT RLLAYOUT HAS BEEN DELETED FROM THE LAYOUT TABLE
Explanation: The layout has been successfully deleted from the ready list layout table.
System action: The ready list layout table is updated.
User response: None.
EQQR104I THE LAYOUT RLLAYOUT HAS BEEN UPDATED IN THE LAYOUT TABLE
Explanation: The layout has been successfully updated in the ready list layout table.
System action: The ready list layout table is updated.
User response: None.
EQQR105E TO EXIT FROM THIS PANEL, EITHER SELECT A LAYOUT OR CANCEL THE REQUEST
Explanation: A layout is required for the requested ready list display.
System action: The system waits for you to respond.
User response: Select an existing layout or create a new one.
EQQR106E FAILURE TO OPEN THE LAYOUT TABLE
Explanation: Tivoli OPC could not open the ready list layout table.
System action: The system waits for you to respond.
User response: Contact your system programmer.
System programmer response: Check that the ISPTLIB dataset contains the EQQRLOUT table.
EQQR107W A DEFAULT LAYOUT CANNOT BE DELETED
Explanation: You have attempted to delete an installation-defined layout, but you are allowed to delete only your
own layouts.
System action: The request is rejected.
User response: Check that the layout you attempted to delete is the layout you want to delete.
EQQR108W THE LAYOUT RLLAYOUT CANNOT BE FOUND IN THE LAYOUT TABLE
Explanation: The layout RLLAYOUT does not exist.
System action: The system waits for you to respond.
User response: Select one of the layouts in the list or create a new one.

304

Tivoli OPC Messages and Codes

EQQR109E EQQR201I

EQQR109E THE LAYOUT RLLAYOUT CANNOT BE FOUND IN THE LAYOUT TABLE
Explanation: The layout RLLAYOUT does not exist.
System action: The system waits for you to respond.
User response: Select one of the layouts in the list or create a new one.
EQQR110E THE LAYOUT ID MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQR111E SELECT AN ITEM BY SPECIFYING SELECT OR A NUMBER 01-99
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQR112E LEAVE BLANK OR SPECIFY OCHCYES OR OCHCNO
Explanation: Data entry error; see “Data Entry Errors” on page 2.

OCHCYES is the national language character for Y (yes) and OCHCNO is for N (no).
EQQR120E NO LAYOUT WAS SELECTED, RSRLT IS USED
Explanation: The ready list was to be displayed using the default layout, RSRLT, that is, the layout that was used
last time the ready list was displayed for the same workstation. That layout could not be found and the first layout in
the layout table is used.
System action: The ready list is displayed.
User response: If the used layout is not appropriate, change the layout ID.
EQQR121E A LAYOUT MUST BE SELECTED TO DISPLAY ERROR LISTS
Explanation: The Ended in Error List cannot be displayed without a layout ID.
System action: A panel listing the possible layouts is displayed.
User response: Select a layout from the selection list or specify a valid ID in the layout input field.
EQQR200E INVALID PARAMETER WHEN CALLING MODULE MODNM
Explanation: There is an invalid parameter in the input to the ready list module (module name MODNM).
System action: The requested access to a ready list function is rejected.
Problem determination: This message indicates that there is an error in the current panel.
User response: Contact your system programmer.
System programmer response: Check that the panel has not been inadvertently overlayed in the panel library
(ISPPLIB).
EQQR201I RETURN CODE URC WAS RETURNED FROM READY LIST USER EXIT
Explanation: The active exit for this ready list layout ended with a return code greater than or equal to 8.
System action: The status is not changed.
User response: Contact the person responsible for ready list exit to determine the reason for the return code that
was set.

Chapter 25. EQQRnnn Messages

305

EQQR202I EQQR403E

EQQR202I SET STATUS REQUEST CANCELLED BY USER EXIT
Explanation: The active exit for this ready list layout has returned a code of 9 in the status field URNSTAT, which
means cancel the request.
System action: The status is not changed.
User response: None.
EQQR300E PRIORITY MUST BE A NUMBER 1 - 9
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQR302E SELECT THE WORK STATION TO DISPLAY A READY LIST
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQR303E A CHARACTER THAT IS NOT A STATUS CODE IS IN THE CODE STRING
Explanation: A character that you have specified as a selection criterion for status codes is not a valid status code.
System action: The system waits for you to respond.
Problem determination: The convention on status codes for the installation is defined in the ISPPLIB library panel
EQQXINIX.
User response: Contact your system programmer.
System programmer response: Check panel EQQXINIX for valid values and reenter.
EQQR400W THERE ARE NO OPERATOR INSTRUCTIONS FOR THIS OPERATION
Explanation: There are no operator instructions for the operation that you selected in the ready list.
System action: The system waits for you to respond.
User response: Check your input.
EQQR401W JS AND JOBLIB DATA SETS CONTAIN NO JCL FOR THIS OPERATION
Explanation: There is no JCL for the operation that you selected in the ready list.
System action: The system waits for you to respond.
User response: Check your input.
EQQR402W THERE IS A JCL RECORD ON THE JS DATA SET, BUT IT CONTAINS NO JCL
Explanation: There is a JCL record for the operation that you selected, but the record does not contain JCL.
System action: The system waits for you to respond.
User response: Check your input.
EQQR403E CHECK JCL RECORD KEY: (JSADID JSIAD JSIAT JSOPNUM)
Explanation: A read failed when trying to read the JCL record with the key JSADID JSIAD JSIAT JSOPNUM. The
key is derived from ISPF variables set up in a panel.
System action: The system waits for you to respond.
Problem determination: This message indicates that there is an error in the current or previous panel.
User response: Contact your system programmer.
System programmer response: Check that the panel has not been inadvertently overlayed in the panel library
(ISPPLIB).

306

Tivoli OPC Messages and Codes

EQQR404E EQQR617E

EQQR404E STORAGE PROBLEMS OCCURRED
Explanation: In a modify control plan (MCP) dialog for a JCL edit session the controller returned data that could not
be retrieved and displayed, because not enough storage had been preallocated to receive it.
Problem determination: This message indicates that, in the ISPF environment, there is not enough main storage to
receive and display the JCL modified and returned from the controller.
EQQR600E STATUS ENTERED OR GIVEN BY EXIT MUST BE STR, STS, STI, STE, OR STC
Explanation: Data entry error; see “Data Entry Errors” on page 2.

STR is the national language character for R (ready), STS is for S (started), STI is for I (interrupted), STE is for E
(ended-in-error), and STC is for C (complete).
EQQR602E ENTER OSOPSTS, OSOPSTI, OSOPSTE, OR OSOPSTC
Explanation: Data entry error; see “Data Entry Errors” on page 2.

OSOPSTS is the national language character for S (started), OSOPSTI is for I (interrupted), OSOPSTE is for E
(ended-in-error), and OSOPSTC is for C (complete).
EQQR603E ENTER OSOPSTS, OSOPSTE, OR OSOPSTC
Explanation: Data entry error; see “Data Entry Errors” on page 2.

OSOPSTS is the national language character for S (started), OSOPSTE is for E (ended-in-error), and OSOPSTC is
for C (completed).
EQQR604E ENTER OSOPSTI, OSOPSTE, OR OSOPSTC
Explanation: Data entry error; see “Data Entry Errors” on page 2.

OSOPSTI is the national language character for I (interrupted), OSOPSTE is for E (ended-in-error), and OSOPSTC is
for C (complete).
EQQR615E ONLY OPERATIONS WITH STATUS ARRIVING CAN BE SET TO READY
Explanation: You have attempted to set an operation in the current plan to “ready,” but only operations with status
“arriving” can be set to ready.
System action: The system waits for you to respond.
User response: Enter a valid status or leave blank.
EQQR616W REQUEST TO SET THE STATUS TO STARTED IS IGNORED
Explanation: You have attempted to set an operation in the current plan to “started,” but the operation has already
started.
System action: The request is ignored.
User response: None.
EQQR617E ONLY OPERATIONS WITH THE STATUS STARTED CAN BE INTERRUPTED
Explanation: You have attempted to interrupt an operation that has not yet started. You can interrupt an operation
only if it has already started.
System action: The system waits for you to respond.
User response: Enter a valid status or leave blank.

Chapter 25. EQQRnnn Messages

307

EQQR618W EQQR626E

EQQR618W REQUEST TO SET THE STATUS TO ERROR IS IGNORED
Explanation: You have attempted to set an operation in the current plan to “ended-in-error” status, but the operation
is already set to that status.
System action: The request is ignored.
User response: None.
EQQR619W REQUEST TO SET THE STATUS TO COMPLETE IS IGNORED
Explanation: You have attempted to set an operation in the current plan to “complete” status, but the operation has
already completed.
System action: The request is ignored.
User response: None.
EQQR620W THE INTERRUPT REQUEST IS IGNORED
Explanation: You have attempted to interrupt an operation in the current plan, but the operation has already been
interrupted.
System action: The request is ignored.
User response: None.
EQQR621E DURATION REQUIRED FOR OPERATIONS THAT HAVE NOT BEEN STARTED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
You must specify a duration for operations that have not started.
EQQR622E AN OPERATION WAITING FOR ARRIVAL CANNOT BE RESET
Explanation: You have attempted to reset an operation that is waiting for arrival. This is not allowed.
System action: The system waits for you to respond.
User response: Enter a valid status or leave blank.
EQQR623E AN OPERATION WITH READY STATUS CANNOT BE RESET
Explanation: You have attempted to reset an operation that is ready. This is not allowed.
System action: The system waits for you to respond.
User response: Enter a valid status or leave blank.
EQQR624E OP BEING UPDATED BY ANOTHER USER, REQUEST IS REJECTED, RSNC: XSSRS
Explanation: The operation either cannot be read from the current plan or has another status, real duration, or error
code than is displayed. The operation has been changed from its condition in the ready list.
System action: The ready list is refreshed and the system waits for you to respond.
User response: Review the operation, and if it is still valid, reenter the request.
EQQR626E THE REQUESTED STATUS CHANGE MUST BE DONE VIA A RESET REQUEST
Explanation: The intended status change is not supported. You must enter a reset request and a request to get the
desired status.
System action: The ready list is displayed.
User response: Enter the row command R and enter N-x, where x is the required status.

308

Tivoli OPC Messages and Codes

EQQR627E EQQR658E

EQQR627E RESET OF OSEQ OPERATION MUST BE DONE VIA MODIFY CURRENT PLAN
Explanation: You attempted to reset an operation with error code OSEQ from the Ready List dialog. This cannot
be done. The error code OSEQ indicates that a job began to execute before all the predecessors to the operation
were complete.
System action: The ready list is displayed.
User response: Reset can be done when all predecessors to the OSEQ operation are complete. To reset the
operation status to Waiting, issue the operation command RERUN from the error list in the Modify Current Plan dialog.
EQQR629E THE JCL IS BEING UPDATED BY ANOTHER USER, REQUEST IS REJECTED
Explanation: You have attempted to update the JCL, but it is being updated by another user.
System action: The request is rejected and the system waits for you to respond.
User response: Try again later.
EQQR638E WHEN SETTING STATUS TO OSOPSTI, SPECIFY DURATION OF OPERATION
Explanation: Data entry error; see “Data Entry Errors” on page 2.
A duration of operation is required when setting the status to OSOPSTI, the national language character for I
(interrupted).
EQQR639E WHEN SETTING STATUS TO OSOPSTE, THE TYPE OF ERROR MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
A type of error is required when setting the status to OSOPSTE, the national language character for E
(ended-in-error).
EQQR640I THE JCL FOR THIS OPERATION CONTAINS UNRESOLVED SETUP VARIABLES
Explanation: You tried to resolve variables using the program interface request JCLPREPA, with SIMTYPE FULL,
and Tivoli OPC found one or more unresolvable variables in the JCL for the operation.
System action: None.
User response: Browse the Tivoli OPC message log dataset (EQQMLOG) for message EQQJ510, which gives you
the name of the failing variable. Correct the failing variable and retry the request.
EQQR656E THE VALUE ENTERED DOES NOT MATCH THE VARIABLE'S VERIFICATION RULES
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The value that you entered is invalid according to the validation criteria defined for this variable.
For more information, use the S row command to check if help is defined for the current variable. If no help is
defined, contact the person responsible for variable definitions to see what rules apply to the variable.
EQQR657E A VALUE MUST BE ENTERED FOR THIS VARIABLE
Explanation: Data entry error; see “Data Entry Errors” on page 2.
According to the definition of this variable, a value must be entered.
EQQR658E THE EDIT OPTION CHARACTER MUST BE Y OR N
Explanation: Data entry error; see “Data Entry Errors” on page 2.
You must enter Y (yes) or N (no).

Chapter 25. EQQRnnn Messages

309

EQQR662E EQQR675E

| EQQR662E A VARIABLE WITH VAL REQ=Y MUST NOT HAVE A BLANK VALUE
| Explanation: If it is specified that a JCL variable requires a value other than blank, the default value must not be
| blank.
| System action: The system waits for you to respond.
| User response: Insert a default value other than blank in the Default Value field.
EQQR675E AN ERROR OCCURRED DURING JCL-VARIABLE SUBSTITUTION
Explanation: An error was detected during JCL variable substitution processing. This message can be issued to a:
Dialog user
PIF application

In the JCL Setup dialog to indicate that an error has been detected during variable substitution
In the EQQMLOG for the program interface (PIF) job when any type of substitution or validation
error occurs.

System action: In the dialog, the system waits for you to respond. If the error occurred while using the PIF, the job
is terminated with a return code of 0008.
Problem determination: In the dialog, look at the detailed error message that has been inserted into the JCL. You
can find the message by entering ISPF command LOCATE SPECIAL.
If you are using the PIF, check the controller message log (EQQMLOG) for messages describing the error.
User response: Correct the errors and retry the request.

310

Tivoli OPC Messages and Codes

EQQSU01I EQQSU06E

Chapter 26. EQQSUnn Messages
EQQSU01I THE SUBMIT TASK HAS STARTED
Explanation: The submit task has successfully completed initialization.
System action: The submit task processing starts.
User response: None.
EQQSU02I THE SUBMIT TASK HAS ENDED
Explanation: The submit task has terminated processing normally. An operator has stopped the submit task or the
Tivoli OPC subsystem has stopped.
System action: The submit task processing is terminated.
User response: None.
EQQSU03E THE SUBMIT TASK HAS ENDED DUE TO PROCESSING ERRORS
Explanation: The submit task cannot continue processing due to a severe error.
System action: The submit task processing is terminated.
Problem determination: Review previous messages in the Tivoli OPC message log.
System programmer response: Correct the errors and restart the submit task.
EQQSU04E THE SUBMIT TASK INITIALIZATION FAILED, THE TASK IS TERMINATED
Explanation: The submit task could not acquire the resources required for normal operation.
System action: The submit task processing is terminated.
Problem determination: Review previous messages in the Tivoli OPC message log.
System programmer response: Correct the errors and restart the submit task.
EQQSU05E THE OPC INTERNAL READER FILE, DDNAME = EQQBRDS, COULD NOT BE OPENED
Explanation: The submit task could not open the internal reader dataset.
System action: If the error occurs when the submit task is being initialized, the submit task processing is terminated
and message EQQSU04 is issued.
If the error occurs when the submit task tries to reopen the internal reader to perform a submit for a user, the submit
task processing continues, but the current job is not submitted.
Problem determination: Check that DDNAME EQQBRDS is correctly specified in the startup procedure.
System programmer response: Correct the errors and restart either the submit task or the Tivoli OPC subsystem.
EQQSU06E A SEVERE ERROR IN THE SUBMIT TASK HAS CAUSED ONE OR MORE REQUESTS TO BE LOST
Explanation: The submit task abended while processing elements on SUBQ. The chaining of elements on SUBQ
has been corrupted.
System action: MVS recovery/termination is requested to generate a dump. All elements currently on SUBQ are
skipped. The submit task attempts to continue normal processing.
Problem determination: Review the Tivoli OPC message log dataset and the dump dataset to determine the cause
of the problem.
System programmer response: Save the message log and dump datasets, and contact your IBM representative.

 Copyright IBM Corp. 1991, 1999

311

EQQSU07E EQQSU12I

EQQSU07E THE SUBMIT TASK ABENDED WHILE PROCESSING THE FOLLOWING REQUEST: REQUEST
Explanation: An abend prevented the submit task from processing a queue element.
System action: MVS recovery/termination is requested to generate a dump. The submit task attempts to continue
normal processing.
Problem determination: Review the Tivoli OPC message log dataset and the dump dataset to determine the cause
of the problem.
System programmer response: Save the message log and dump datasets, and contact your IBM representative.
EQQSU09W JOB JOBNAME(JOBNUM) COULD NOT BE RELEASED. REPEATED RETRIES HAVE FAILED
Explanation: The submit task received a release request for a job, but could not communicate successfully with JES
while trying to release the job from hold.
System action: No more attempts to release the job are made. The submit task continues processing.
Problem determination: Review the system log and look for previous JES messages that indicate unusual
conditions.
Operator response: Determine the current status of the job. If necessary, release the job manually.
EQQSU10E JOB JOBNAME IN APPLICATION APPL COULD NOT BE SUBMITTED BECAUSE THE SUBMIT EXIT
RETURNED A SUBMITTING USER ID, USER, WHOSE AUTHORITY COULD NOT BE DETERMINED
Explanation: The job submit exit returned a TSO user ID. A job submit environment could not be built for this user
ID, because of an authority error.
System action: The current job is not submitted. The submit task continues processing.
Problem determination: Check that the job submit exit, EQQUX001, returns only valid TSO user IDs.
User response: If necessary, submit the job manually.
EQQSU11W DDNAME EQQEVDS IS MISSING OR SPECIFIES DD DUMMY
Explanation: The submit task is starting and does not have access to an event dataset. The header record (record
0) in the event dataset is used for submit checkpointing, and with no event dataset available for submit checkpointing,
submit requests may be lost or duplicated.
System action: The submit task continues processing, but does not checkpoint submit requests. The first submit
request received after start up causes message EQQSU22E to be issued.
Problem determination: Verify the JCL procedure for this Tivoli OPC address space.
System programmer response: Allocate a unique event dataset to the EQQEVDS DD statement. If this Tivoli OPC
address space does not start an event writer subtask, that is, EWTRTASK(NO) in OPCOPTS, allocate the event
dataset with two tracks of space.

| EQQSU12I MAX NUMBER OF WORKSTATIONS CHECKPOINTED BY THIS SUBMIT TASK: #WS
| Explanation: Using the EQQEVDS dataset LRECL, the submit task has calculated the maximum number (#WS) of
| workstations that can be checkpointed by this submit task.
System action: Normal processing continues.
Problem determination: This message is for information only.
User response: None.
System programmer response: None.

312

Tivoli OPC Messages and Codes

EQQSU13E EQQSU22E

EQQSU13E THE OPC STARTED TASK FILE, DDNAME = EQQSTC, COULD NOT BE OPENED FOR OUTPUT
Explanation: The submit task was unable to open the started task temporary proclib dataset. This file is defined by
the EQQSTC DD statement in the JCL procedure used to start the Tivoli OPC subsystem.
System action: If the error is discovered during the start of Tivoli OPC, the submit task issues message EQQSU04
and is terminated. If the error is discovered during submit of a started task, this message is followed by message
EQQW759W and the submit task stops submitting started tasks.
Problem determination: Check that the EQQSTC DD statement is correctly specified in the startup procedure.
Verify that the Tivoli OPC subsystem is authorized to open the temporary proclib dataset for output. If RACF is
installed, determine if the MVS SYSLOG file contains an ICH408 access violation message for the temporary proclib
dataset.
System programmer response: Make sure that the Tivoli OPC subsystem is properly authorized to use the
temporary proclib dataset, that the EQQSTC DD statement is correctly defined, and restart either the submit task or
the Tivoli OPC subsystem.
EQQSU20E UNABLE TO READ EQQEVDS HEADER RECORD FOR REQUEST TYPE DQETYPE ON
WORKSTATION WSNAME
Explanation: The submit task was unable to execute a submit checkpoint request for the stated reason. Valid
requests for the request type are:
J0
J1
J2
WTO

Request for submit checkpoint sequence number
Job submit checkpoint request
STC start checkpoint request
Message checkpoint request.

System action: The submit task continues normal processing.
Problem determination: Review earlier messages in the message log to determine the cause of the error.
System programmer response: If necessary, stop Tivoli OPC, take corrective action, and restart Tivoli OPC.
EQQSU21E UNABLE TO UPDATE EQQEVDS HEADER RECORD FOR REQUEST TYPE DQETYPE ON
WORKSTATION WSNAME
Explanation: The submit task was unable to execute a submit checkpoint request for the stated reason. Valid
requests for the request type are:
J0
J1
J2
WTO

Request for submit checkpoint sequence number
Job submit checkpoint request
STC start checkpoint request
Message checkpoint request.

System action: The submit task continues normal processing.
Problem determination: Review earlier messages in the message log to determine the cause of the error.
System programmer response: If necessary, stop Tivoli OPC, take corrective action, and restart Tivoli OPC.
EQQSU22E UNABLE TO ACCESS THE EQQEVDS FILE FOR REQUEST TYPE DQETYPE ON WORKSTATION
WSNAME
Explanation: The submit task was unable to execute a submit checkpoint request for the stated reason. Valid
requests for the request type are:
J0
J1
J2
WTO

Request for submit checkpoint sequence number
Job submit checkpoint request
STC start checkpoint request
Message checkpoint request

Chapter 26. EQQSUnn Messages

313

EQQSU23E EQQSU24W

EQQSU23E NO FREE SPACE IN EQQEVDS HEADER RECORD FOR REQUEST TYPE DQETYPE ON
WORKSTATION WSNAME
Explanation: The submit task was unable to execute a submit checkpoint request because all workstation entries in
the header record of the event dataset are used. Valid requests for the request type are:
J0
J1
J2
WTO

Request for submit checkpoint sequence number
Job submit checkpoint request
STC start checkpoint request
Message checkpoint request

System action: The submit task continues normal processing.
Problem determination: The maximum number of workstations that can be checkpointed by this EQQEVDS is
indicated in message EQQSU12I. If you have more workstations defined for this destination than can be
checkpointed, you should reallocate the EQQEVDS with a larger logical record length. Refer to the Tivoli OPC
Installation Guide for more details.
System programmer response: If necessary, stop Tivoli OPC, scrap and reallocate the EQQEVDS with a larger
LRECL, and restart Tivoli OPC.
EQQSU24W WORKSTATION WSNAME IS NOT PRESENT IN THE EQQEVDS HEADER RECORD
Explanation: The submit task could not remove a workstation name from the header record in the event dataset
because the name is not present.
System action: The submit task continues normal processing.
System programmer response: None.

314

Tivoli OPC Messages and Codes

EQQS000E EQQS005E

Chapter 27. EQQSnnn Messages
EQQS000E YOU DO NOT HAVE AUTHORITY TO ACCESS THE QUERY CP DIALOG
Explanation: You have attempted to access the Query Current Plan dialog, but you are not authorized.
System action: The request is rejected and the system waits for you to respond.
User response: If you need access to the Query Current Plan dialog, contact your security administrator.
EQQS001E AN INVALID MODULE PARAMETER WAS DETECTED
Explanation: There is an invalid parameter in the input to a query current plan module.
System action: The requested access to the query current plan function is rejected.
Problem determination: This message indicates that there is an error in the current panel.
User response: Contact your system programmer.
System programmer response: Check that the panel has not been inadvertently overlaid in the panel library
(ISPPLIB).
EQQS003I THE TRACKER HAS NOT PROVIDED ANY SYSTEM INFORMATION
Explanation: System information is not available for the destination defined for this workstation. Tracker system
information is available only when the Tivoli OPC controller has performed the initial synchronization and handshaking
with the tracker or the Tracker Agent.
System action: None.
User response: The handshaking process may be in progress. Retry the request when the workstation is in Active
status. The message can also indicate an error in the Tivoli OPC configuration.
System programmer response: This message is an indication that handshaking is not completed between the
controller and the tracker or the Tracker Agent. If the destination is Active, that is, there is not a communication
failure, the event writer subtask at the indicated destination is not active. If this message is not expected, take
appropriate actions to correct the problem with the tracker or the Tracker Agent.
EQQS004E PROBLEMS ENCOUNTERED ATTEMPTING TO LOCATE SYSTEM INFORMATION
Explanation: The controller encountered an error when processing the request for system information. This
message is always an indication of an internal error in Tivoli OPC.
System action: Normal processing continues.
User response: Contact your system programmer. Take note of the workstation name and the approximate time
when this message was issued.
System programmer response: This message indicates that there is an error either in the processing of the
ROUTOPTS initialization statement or in the current plan (CP) dataset. If Tivoli OPC is operating normally, no action
needs be taken immediately. Take a copy of the active CP dataset, the active job-tracking log, the job-tracking
archive, and the controller message log, and call your IBM representative.
EQQS005E SYSTEM INFORMATION IS ONLY POSSIBLE FOR COMPUTER WORK STATIONS
Explanation: System information is passed to the controller by the tracker or the Tracker Agent executing on a
system destination as specified in the workstation description. System information is only available for computer
workstations.
System action: The request is rejected.
User response: Choose a computer workstation that represents the system for which you need information.

 Copyright IBM Corp. 1991, 1999

315

EQQS100E EQQS107E

EQQS100E THE ONLY VALID VALUES ARE OCHCYES AND OCHCNO
Explanation: You entered an invalid value in the AVAIL column.
System action: The system waits for you to respond.
User response: Enter a correct value in the AVAIL column.
EQQS101E YOU ARE NOT AUTHORIZED TO MODIFY SPECIAL RESOURCES
Explanation: To display a Tivoli OPC panel where special resources can be modified, you need update authority to
special resources. You do not have this authority.
System action: The request is rejected.
User response: Contact your security administrator.
EQQS102E SPECIAL RESOURCES ARE BEING UPDATED. TRY LATER
Explanation: Another Tivoli OPC dialog user is currently updating special resources. To avoid overlaying another
user’s changes, only one dialog user can actively modify special resources.
System action: Processing continues.
User response: Try again later.
EQQS103E LEAVE BLANK OR SPECIFY ONE OF OSROEF, OSROEFS, OSROEFX, OR OSROEK
Explanation: You entered an invalid action code in the On error field for a special resource.
System action: The system waits for you to respond.
User response: Enter a valid value or leave the field blank.
EQQS104E YOU ARE NOT AUTHORIZED TO BROWSE SPECIAL RESOURCES
Explanation: To display a Tivoli OPC panel where special resources can be shown, you need read authority to
special resources. You do not have this authority.
System action: The request is rejected.
User response: Contact your security administrator.
EQQS105E EACH SPECIAL RESOURCE MUST NOT BE DEFINED BY MORE THAN ONE ROW
Explanation: You have modified the table containing special resources so that there is more than one row defining a
special resource. This is not allowed.
System action: The system waits for you to respond.
User response: Delete all duplicate resource definition rows for the special resource.
EQQS106E OPC ENCOUNTERED ERRORS WHEN TRYING TO UPDATE SPECIAL RESOURCES
Explanation: An error occurred while updating special resource information in the Tivoli OPC subsystem.
System action: The updated special resource is not stored.
User response: Review the log dataset for error messages issued at the time of the request. If you cannot
determine the cause of the problem and the error persists, contact your IBM representative.
EQQS107E DLF INDICATOR CANNOT BE UPDATED WHILE RESOURCE IS ALLOCATED
Explanation: The update cannot be performed until all operations currently allocating the resource have completed.
System action: The update request is rejected.
User response: Retry the update request later.

316

Tivoli OPC Messages and Codes

EQQS300E EQQS309E

EQQS300E PRIORITY MUST BE A NUMBER FROM 1 - 9
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQS301E THE MCP ADDED INDICATOR MUST BE OCHCYES OR OCHCNO
Explanation: Data entry error; see “Data Entry Errors” on page 2.

OCHCYES is the national language character for 'Y' (yes) and OCHCNO is the national language character for 'N'
(no).
EQQS302E THE RERUN INDICATOR MUST BE OCHCYES OR OCHCNO
Explanation: Data entry error; see “Data Entry Errors” on page 2.

OCHCYES is the national language character for 'Y' (yes) and OCHCNO is the national language character for 'N'
(no).
EQQS303E AN INVALID STATUS CODE STT WAS FOUND IN THE CODE STRING
Explanation: One or more of the status codes (STT) that you specified is not valid.
System action: The system waits for you to respond.
Problem determination: The convention on status codes for the installation is defined in the ISPPLIB library panel
EQQXINIX.
User response: Enter valid status codes.
EQQS304E MOST CRITICAL OCCURRENCE LIST, DO NOT SELECT ON STATUS STT
Explanation: The most critical occurrence list contains all occurrences that were not completed or deleted. It is not
possible to further restrict the list base on the occurrence status.
System action: The system waits for you to respond.
User response: Remove the status code. If you want selection on status, go back to the Current Plan and Status
Inquiry panel and select 1, APPLICATIONS.
EQQS305E CODE MUST BE ONE OF ST1E , ST1D , ST1P OR ST1A
Explanation: You entered an invalid code for selecting occurrences from the current plan in the Query Current Plan
dialog.
System action: The system waits for you to respond.
User response: Enter the correct code.
EQQS306E SELECTION TYPE MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQS307E SELECTION TYPE MUST BE OCHALLP, OCHNONP, OCHALLS, OR OCHNONS
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQS308E NESTING LEVEL MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQS309E NESTING LEVEL MUST BE 1-999
Explanation: Data entry error; see “Data Entry Errors” on page 2.

Chapter 27. EQQSnnn Messages

317

EQQS400I EQQS402E

EQQS400I NO ENTRIES WERE SELECTED FOR THE LIST
Explanation: A request for a list of records resulted in an empty list. Either there were no records that matched the
selection criteria or you were not authorized to access those that were found.
System action: None.
User response: None.
EQQS401I NO OPEN INTERVAL SPECIFIED IN THE WORK STATION DEFINITION
Explanation: The workstation description in the current plan has no open interval.
System action: None.
User response: None.
EQQS402E UNABLE TO RETRIEVE CPREC DATA, NO RECORDS FOUND
Explanation: The attempt to read the record CPREC from the current plan failed. The current plan record may have
been changed after the list data was displayed.
System action: The system waits for you to respond.
User response: Refresh the operation list to reflect the current status of the current plan. For ready lists and the
ended-in-error list, this is done automatically at any dialog request or when ENTER is pressed. For other operation
lists, it is necessary to exit from the list and redisplay the list.

318

Tivoli OPC Messages and Codes

EQQTT01I EQQTT05E

Chapter 28. EQQTTnn Messages
EQQTT01I THE TCP/IP COMMUNICATION TASK HAS STARTED
Explanation: The TCP/IP communication task has successfully completed initialization.
System action: The TCP/IP communication task processing continues.
User response: None.
EQQTT02I THE TCP/IP COMMUNICATION TASK HAS ENDED
Explanation: The TCP/IP communication task has ended either because the Tivoli OPC controller is in the process
of shutting down or as a result of an operator modify command to terminate this task or a related task.
System action: Tivoli OPC processing continues.
User response: None.
EQQTT03E THE TCP/IP COMMUNICATION TASK HAS ENDED DUE TO PROCESSING ERRORS
Explanation: The TCP/IP communication task has terminated due to processing errors.
Problem determination: Check the Tivoli OPC message log and the dump datasets for additional information that
describes the problem.
System action: Normal Tivoli OPC processing continues.
User response: Contact your system programmer.
System programmer response: If the cause of the error cannot be determined, take a dump of the Tivoli OPC
address space, retain a copy of the message log and the job-tracking datasets, and contact your IBM representative.
EQQTT04E THE TCP/IP COMMUNICATION TASK FAILED TO CONNECT WITH THE MVS TCP/IP ADDRESS
SPACE
Explanation: The TCP/IP communication task has not been able to establish a connection with the TCP/IP address
space.
System action: Normal Tivoli OPC processing continues. Operations scheduled to execute on TCP/IP connected
workstations are not started.
User response: If the Tivoli OPC controller includes workstations associated with TCP/IP connected destinations,
contact your system programmer.
System programmer response: Determine why Tivoli OPC was unable to establish the connection to the TCP/IP
address space. When the problem has been corrected restart the Tivoli OPC controller.
EQQTT05E THE TCP/IP COMMUNICATION TASK TERMINATED DUE TO A PROCESSING FAILURE
Explanation: The TCP/IP communication task is terminated because an error occurred either when processing the
initialization statements or in the communication with the TCP/IP address space.
System action: The TCP/IP communication task processing is terminated. If EQQTT05 is preceded by message
EQQTT13 the TCP/IP communication task is restarted automatically and attempts to restore sessions.
Problem determination: Review previous messages in the Tivoli OPC message log.
User response: Contact your system programmer.
System programmer response: Correct all errors in the ROUTOPTS initialization statements and restart Tivoli
OPC.

 Copyright IBM Corp. 1991, 1999

319

EQQTT06E EQQTT09E

EQQTT06E A SEVERE ERROR IN THE TCP/IP COMMUNICATION TASK HAS CAUSED ONE OR MORE
REQUESTS TO BE LOST
Explanation: The TCP/IP communication task encountered an error processing elements on the TATQ. As a result,
one or more queue elements have been lost.
System action: MVS recovery/termination is requested to generate a dump. The TCP/IP communication task
attempts to continue normal processing.
Problem determination: Review the Tivoli OPC message log dataset, the EQQDUMP diagnostic dataset, and the
dump dataset to determine the cause of the problem.
Tivoli OPC administrator response: Save the message log, dump and diagnostic datasets, and contact your IBM
representative.
EQQTT07E THE TCP/IP COMMUNICATION TASK ABENDED WHILE PROCESSING THE FOLLOWING
REQUEST: REQUEST
Explanation: An abend prevented the TCP/IP communication task from processing a queue element.
System action: MVS recovery/termination is requested to generate a dump. The TCP/IP communication task
attempts to continue normal processing.
Problem determination: Review the Tivoli OPC message log dataset, the EQQDUMP diagnostic dataset, and the
dump dataset to determine the cause of the problem.
User response: Contact your system programmer.
System programmer response: Save the message log, dump and diagnostic datasets, and contact your IBM
representative.
EQQTT08E THE TCP/IP COMMUNICATION TASK HAS IGNORED THE FOLLOWING QUEUE ELEMENT:
REQUEST
Explanation: The TCP/IP communication task has detected an invalid queue element on its queue.
System action: The element is discarded from the TCP/IP communication task queue. The TCP/IP communication
task continues normal processing.
Problem determination: Review the Tivoli OPC message log dataset.
User response: Contact your system programmer.
System programmer response: Save the message log (EQQMLOG) and the current plan (EQQCPxDS) and
contact your IBM representative.
EQQTT09E THE TCP/IP TASK CANNOT START, TRACKER FEATURE IS NOT INSTALLED
Explanation: The TCP/IP communication task could not locate a required load module.
System action: The TCP/IP communication task is terminated.
System programmer response: If the AIX tracker feature is not installed, the ROUTOPTS initialization statement
should not specify the TCP keyword. If the AIX tracker feature is installed, make sure that the Tivoli OPC subsystem
can access the corresponding load module libraries. After making the appropriate corrections, restart the Tivoli OPC
subsystem.

320

Tivoli OPC Messages and Codes

EQQTT10E EQQTT14I

EQQTT10E THE TCP/IP COMMUNICATION TASK ENCOUNTERED AN ERROR WHILE PROCESSING A
REQUEST REQUEST
Explanation: An error was encountered when the TA communication task attempted a REQUEST TCP/IP socket
call.
System action: If the request type is any of INIT, BIND, GHID, or LSTN, the TA task is terminated. For any other
request type, the TA task closes the session with the corresponding tracker. The session is reestablished.
Problem determination: Should the request error cause the TA task to terminate, the reason for the error could be
any of the following:
The VMCF address space is not active.
The TCP/IP started task is not started.
The TCPIPID keyword in the ROUTOPTS statement does not define the name of the TCP/IP started task.
System programmer response: Correct any of the detailed error conditions and restart the TA task. If the error
reoccurs, save the message log (EQQMLOG) and contact your IBM representative.
EQQTT11E AN UNDEFINED TRACKER AT IP ADDRESS IPADDR ATTEMPTED TO CONNECT TO THE
CONTROLLER. THE REQUEST IS NOT ACCEPTED
Explanation: A client with IP address IPADDR, which is not specified in the TCP keyword of the ROUTOPTS
initialization statement, attempted to connect to the Tivoli OPC controller via the TCP/IP link. The connection attempt
is not accepted.
System action: Normal processing continues.
Problem determination: Check the TCP keyword specification in the ROUTOPTS statement and the IP addresses
of the corresponding trackers and make sure there is a one-to-one correspondence.
System programmer response: Correct any discrepancy in the ROUTOPTS initialization statement or the Tracker's
configuration file and restart either the Tivoli OPC controller (if ROUTOPTS is in error) or the Tracker Agent.
EQQTT12E A TCP/IP BIND REQUEST FAILED BECAUSE PORT PORT IS OCCUPIED
Explanation: An error was encountered when the TA communication task attempted a bind request. The PORT
specified in the TCPIPPORT keyword of the ROUTOPTS initialization statement is already occupied.
System action: The TA task is terminated.
System programmer response: Correct the ROUTOPTS specification and restart the subsystem.
EQQTT13E THE TCP/IP COMMUNICATION TASK LOST THE CONNECTION TO THE TCP/IP ADDRESS SPACE
Explanation: A severe error occurred in the communication between the TA task and the TCP/IP address space.
System action: The TA task sets all workstations associated with TCP destinations to status Offline. The TA task is
restarted and thus attempts to reestablish the connection with the TCP/IP address space and restore sessions.
Problem determination: The TCP/IP address space might have been terminated.
System programmer response: If TCP/IP address space is inactive, restart it.
EQQTT14I THE TCP/IP COMMUNICATION TASK WILL WAIT 60 SECONDS BEFORE RESTART
Explanation: The TCP/IP communication task is restarted due to problems in the connection to the TCP/IP address
space. It waits 60 seconds before attempting to establish a new connection.
System action: The TCP/IP communication task continues processing.
User response: None.

Chapter 28. EQQTTnn Messages

321

EQQTT15I EQQTT19W

EQQTT15I THE TCP/IP COMMUNICATION TASK HAS BEEN UNABLE TO ESTABLISH A CONNECTION TO THE
TCP/IP ADDRESS SPACE FOR THE LAST 200 SECONDS
Explanation: The TCP/IP communication task is attempting to establish a connection to the TCP/IP started task after
a restart. Attempts are made at 20-second intervals. The message is issued every tenth attempt.
System action: The TCP/IP communication task continues processing.
User response: None.
System programmer response: Make sure that the TCP/IP address space is started.

| EQQTT16E THE TC TASK RECEIVED INVALID IDENTIFICATION DATA FROM DESTINATION: LU. VALIDATION
|
RETURN CODE IS RC
Explanation: The initial data received from a TCP/IP-connected Tracker Agent is not valid.
System action: The TA task frees all resources allocated to this session and closes the session.

| Return Code

Explanation

| 4
|
|

The difference between the host system GMT value and the tracker system GMT value is greater
than 60 minutes. This message is followed by message EQQTT22, which shows the different GMT
values.

| 8

The identification data is invalid for other causes to be investigated.

System programmer response: Verify that the correct Tracker Agent program has been started on the remote

| destination and that the program is at a supported maintenance level. If the return code is 4, correct the GMT values
| involved, using the information in message EQQTT22. After making the corrections, restart the partner program.
EQQTT17E TCP KEYWORD VALUE, VAL1, IS TOO LONG (OR MISSING)
Explanation: A workstation destination name specified as a value of the TCP keyword of the ROUTOPTS statement
is incorrect. The destination name is required and must be not greater than eight characters.
System action: Processing of the TCP keyword continues. Message EQQTT18E is issued when all destinations
have been processed.
System programmer response: Either remove or correct the invalid destination and restart the Tivoli OPC
subsystem.
EQQTT18E AT LEAST ONE TCP DESTINATION IS INCORRECTLY DEFINED
Explanation: The TCP keyword of the ROUTOPTS statement contains one or more incorrectly defined TCP
destinations.
System action: Processing of the current ROUTOPTS statement terminates with a nonzero return code. This
causes Tivoli OPC initialization to fail.
System programmer response: Review earlier error messages to determine the incorrectly defined destination.
Either remove or correct the invalid destination and restart the Tivoli OPC subsystem.

| EQQTT19W NO ACTIVITY WITHIN THE TIME-OUT INTERVAL. DEST IS CONSIDERED LOST
Explanation: The TCP/IP-connected Tracker Agent defined as TCP destination DEST has not responded to a submit
request from the controller within the defined time-out interval. The TCPTIMEOUT keyword of the ROUTOPTS
statement defines the time-out interval.
System action: The session is terminated. Workstations that reference the destination are set to Offline status.
System programmer response: Check that the TCP/IP-connected Tracker Agent or the machine where it runs have
not terminated abnormally. Restart the system or the Tracker Agent. If the network is heavily loaded and the Tracker
Agent runs on a remote node with poor end-to-end response, increase the TCPTIMEOUT value to ensure that active
sessions are not inadvertently closed.

322

Tivoli OPC Messages and Codes

EQQTT20E EQQTT23W

| EQQTT20E THE FUNCTION SOCKET CALL FAILED WITH ERROR CODE ERRNO
| Explanation: An error was encountered when the TCP/IP communication task attempted to issue a FUNCTION
| socket call to TCP/IP. The ERRNO value is the error code returned by the failing socket call.
| System action: Depending on the failing call, either the TCP/IP communication task is terminated or the specific
| socket connection is closed. Whenever possible, the task is automatically restarted. If the socket connection is
| closed then it is restablished.
| System programmer response: Check the error code in the TCP/IP API manual and make any possible corrective
| action. If the error reoccurs, save the message log (EQQMLOG) and contact your IBM representative.
| EQQTT21E THE COMMUNICATION WITH DESTINATION DEST WAS TIMED OUT
| Explanation: A socket call issued for the destination DEST failed with error code 60, ETIMEDOUT, that is, the
| TCP/IP timed out the socket connection with this destination.
| System action: The socket connection to the destination DEST is closed and is reestablished as soon as the
| Tracker Agent at that destination attempts to reconnect to the Controller.
| System programmer response: Verify the possible causes for the TCP/IP action. It is possible that there is a
| network problem with that destination, so the Tracker Agent cannot be reached. If the problem is found, correct it,
| and if the problem reoccurs save the message log (EQQMLOG) and contact your IBM representative.
| EQQTT22W THE TCP/IP COMMUNICATION TASK DETECTED AN INVALID DIFFERENCE BETWEEN THE
|
CONTROLLER GMT TIME HOSTGMT AND THE TRACKER GMT TIME TRKGMT
| Explanation: This message follows EQQTT16E. It shows the host system GMT value and the tracker system GMT
| value. The host system GMT value may have been adjusted by the value provided in the GMTOFFSET parameter of
| the OPCOPTS statement.
| System action: None.
| System programmer response: Use the GMT values displayed to determine which system has an incorrect
| definition, and reset the GMT value where necessary. After making the corrections, restart the partner program.
| EQQTT23W THE TRACKER AT DESTINATION DEST ATTEMPTED TO CONNECT WHILE THE CONTROLLER
|
STILL CONSIDERS IT ACTIVE. THE CONNECTION IS RESET.
| Explanation: The TCP/IP communication task rejected a connection attempt from a tracker agent because another
| connection with a destination having the same IP address is already active. The new connection is rejected and the
| old existing one is reset.
| System action: The controller is ready to accept a new connection from the tracker agent involved.
| System programmer response: Check that the next connection attempt from the tracker agent is established
| successfully. If the error reoccurs, save the message log (EQQMLOG) and contact your IBM representative.

Chapter 28. EQQTTnn Messages

323

324

Tivoli OPC Messages and Codes

EQQT002E EQQT015I

Chapter 29. EQQTnnn Messages
EQQT002E END DATE FOR PRINTOUT MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQT003W ENTER END AGAIN TO LEAVE OR PRESS ENTER TO PRINT
Explanation: Reenter END to leave without initiating a printout or press ENTER to initiate the printout.
System action: The system waits for you to respond.
User response: Reenter END or press ENTER.
EQQT005E THE CALENDAR FILE IS SIMULTANEOUSLY BEING UPDATED BY ANOTHER USER
Explanation: The calendar that you specified cannot be added because a calendar is simultaneously being added by
another user.
System action: The system waits for you to respond.
User response: Try again later.

| EQQT011E THE CALENDAR NAME T01101 DOES NOT EXIST
Explanation: The requested calendar was not found in the calendar database. Either you entered the wrong name
or the requested calendar has not yet been created.
System action: None.
User response: Enter the correct calendar name or create the requested calendar.
EQQT012E A CALENDAR NAME MUST BE SPECIFIED
Explanation: You did not specify a calendar name.
System action: None.
User response: Enter the name of the calendar that you need.
EQQT013E INVALID PARAMETER INPUT TO MODULE MOD
Explanation: A programming error has occurred in module MOD.
System action: The system waits for you to respond.
User response: Contact the system programmer to ensure that the IBM-supplied panel is used.
System programmer response: Ensure that the IBM-supplied panel is being used.
EQQT014E CALENDAR CALENDAR IS BEING UPDATED BY ANOTHER USER
Explanation: You cannot update the calendar because another user is already updating it.
System action: The system waits for you to respond.
User response: Try again later.
EQQT015I A CALENDAR HAS BEEN DELETED
Explanation: A calendar has been deleted and the database has been updated.
System action: None.
User response: None.

 Copyright IBM Corp. 1991, 1999

325

EQQT016E EQQT024E

EQQT016E CALENDAR ID IS NOT SPECIFIED
Explanation: A calendar ID must be given.
System action: None.
User response: Enter the calendar ID that you need.
EQQT017I A CALENDAR HAS BEEN UPDATED
Explanation: A calendar has been updated and the database has been updated.
System action: None.
User response: None.
EQQT018E CALENDAR CALENDAR NOT CREATED - MAXIMUM NUMBER EXCEEDED
Explanation: The maximum number of calendars, 32768, has been exceeded.
System action: The system waits for you to respond.
User response: Delete a calendar to allow a new one to be added.
EQQT019E DUPLICATE SPECIFIC DATES / WEEKDAYS EXIST IN TABLE
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQT020I A CALENDAR HAS BEEN ADDED
Explanation: A calendar has been added and the database has been updated.
System action: None.
User response: None.
EQQT021E CALENDAR ID IS MISSING OR INVALID
Explanation: Data entry error; see “Data Entry Errors” on page 2.
A calendar ID can be made up of the following characters: A through Z, 0 through 9, and national characters (that is,
#, $, and @). The first character must be alphabetic.
EQQT022E ENTERED CALENDAR ID ALREADY EXISTS
Explanation: The calendar ID that you specified already exists in the database.
System action: The system waits for you to respond.
User response: Reselect the calendar ID using MODIFY, or specify another calendar ID if using COPY or CREATE.
EQQT023E SPECIFY WEEK DAY OR SPECIFIC DATE IN USER DEFINED FORMAT
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQT024E UNABLE TO READ CALENDAR DESCRIPTION RECORD
Explanation: The calendar description record could not be read because either it may have been deleted by another
user or an error in the calendar description database made it impossible to read the record.
System action: The system waits for you to respond.
User response: Go back to the previous panel and retry. If the error persists, contact your system programmer.
System programmer response: Contact your IBM representative.

326

Tivoli OPC Messages and Codes

EQQT025E EQQT106I

EQQT025E WORK DAY END TIME MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQT026E SPECIFY A VALID DAY OR DATE IN USER DEFINED FORMAT
Explanation: A valid week day or specific date must be given in the user specified format.
EQQT030E END DATE MUST BE LESS THAN FOUR YEARS FROM CURRENT DATE
Explanation: You specified a time span, from current date to end date, that exceeded four years.
System action: The system waits for you to respond.
User response: Specify an end date less than four years from the current date.
EQQT031E THE END DATE IS PRIOR TO CURRENT DATE
Explanation: You specified an end date that is prior to the current date.
System action: The system waits for you to respond.
User response: Specify an end date that is after the current date.
EQQT100E PARAMETER MUST BE A PERIOD NAME
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQT101W PERIOD PERIOD IS BEING UPDATED BY ANOTHER USER
Explanation: You cannot access the period PERIOD because it is being updated by another user.
System action: The system waits for you to respond.
User response: Try again later.
EQQT102I A CALENDAR PERIOD HAS BEEN CREATED
Explanation: A calendar period has been created and the database has been updated.
System action: None.
User response: None.
EQQT103I A CALENDAR PERIOD HAS BEEN DELETED
Explanation: A calendar period has been deleted from the calendar database.
System action: None.
User response: None.
EQQT106I A CALENDAR PERIOD HAS BEEN UPDATED
Explanation: A calendar period has been updated in the calendar database.
System action: None.
User response: None.

Chapter 29. EQQTnnn Messages

327

EQQT108E EQQT121E

EQQT108E PERIOD PERIOD NOT CREATED - ALREADY EXISTS
Explanation: The calendar period PERIOD that you specified could not be created because it already exists in the
calendar database.
System action: The system waits for you to respond.
User response: Enter a unique period name. If you want to create versions of an already existing period, use the
COPY function.
EQQT110E LIST OF ORIGIN DATES CONTAINS DUPLICATES
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQT111E ONLY ONE ORIGIN DATE CAN BE SPECIFIED IN CYCLIC PERIODS
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQT112E ORIGIN DATE MUST BE SPECIFIED
Explanation: You have not specified an origin date.
System action: The request is rejected.
User response: Specify the required origin date.
EQQT113E INTERVAL INCONSISTENT WITH TYPE OF PERIOD
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQT114E CYCLIC TYPE MUST BE ANY OF THE LISTED VALUES
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQT115E PERIOD NAME IS MISSING OR INVALID
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQT116E THE VARIABLE TABLE NAME CONTAINS AN INVALID CHARACTER
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQT117E THE VARIABLE TABLE IS NOT DEFINED TO OPC
Explanation: Data entry error; see “Data Entry Errors” on page 2.
You have tried to define a variable table ID that does not exist in Tivoli OPC's database.
EQQT118E YOU ARE NOT AUTHORIZED TO READ THE JCL VARIABLE TABLE DATA BASE
Explanation: You have attempted to refer to a JCL variable table. To do this, you need read authority to the JCL
variable table database.
System action: The system waits for you to respond.
User response: If you need to refer to JCL variable table names, contact your security administrator.
EQQT121E NON-CYCLIC PERIOD INTERVALS MUST NOT OVERLAP
Explanation: You have entered a period interval origin or an end date within an already existing interval.
System action: The request is rejected.
User response: Change the interval origin or end date so that it falls outside other intervals.

328

Tivoli OPC Messages and Codes

EQQT122E EQQT307E

EQQT122E NON-CYCLIC PERIOD INTERVAL END DATE MUST NOT PRECEDE ORIGIN DATE
Explanation: The interval end date is prior to the associated origin date.
System action: The request is rejected.
User response: Change the interval end date or the interval origin date, so that the interval end date is later than
the interval origin date.
EQQT123E INTERVAL END DATE MAY NOT BE SPECIFIED FOR CYCLIC PERIODS
Explanation: You have entered an interval end date for a cyclic period. This is allowed only for noncyclic periods.
System action: The request is rejected.
User response: Erase the specified interval end date specified or change the period type to noncyclic.
EQQT305E DAY STATUS MUST BE SPECIFIED AS OCHWORK OR OCHFREE
Explanation: Data entry error; see “Data Entry Errors” on page 2.

OCHWORK is the national language character for 'W' (work day) and OCHFREE is for 'F' (free day).
EQQT307E CALENDAR MUST CONTAIN AT LEAST ONE WORK DAY
Explanation: A calendar must contain at least one work day, but the calendar you are trying to create has none.
System action: No calendar is created. Tivoli OPC processing continues.
System programmer response: None.
User response: Make sure that the calendar definition specifies at least one work day and re-create the calendar.

Chapter 29. EQQTnnn Messages

329

330

Tivoli OPC Messages and Codes

EQQU000E EQQU044I

Chapter 30. EQQUnnn Messages
EQQU000E YOU ARE NOT AUTHORIZED TO USE FUNCTION UUFUNC
Explanation: You have attempted to use function UUFUNC, but you are not authorized.
System action: The request is rejected.
User response: If you want to use UUFUNC, contact your security administrator.
EQQU005I THE REQUEST TO UUFUNC OF UUUSUBS IS HANDLED
Explanation: Your request has been processed.
System action: The requested action is carried out.
User response: None.
EQQU040E THE SUBTASK HAS TERMINATED
Explanation: The request that you have made was not accepted by the subsystem because the normal mode
manager (NMM) has terminated.
System action: The request is rejected.
Problem determination: Review the Tivoli OPC message log for messages concerning the NMM.
User response: Exit the dialog and contact your system programmer.
System programmer response: Check the Tivoli OPC message log for messages that may explain why the NMM is
not available.
EQQU041I THE FUNCTION IS ALREADY ACTIVE AND ENABLED FOR SERVICE
Explanation: You have attempted to activate the function, but it is already active and enabled for service.
System action: None.
User response: None.
EQQU042I THE FUNCTION IS ALREADY INACTIVE AND DISABLED FOR SERVICE
Explanation: You have attempted to deactivate the function, but it is already inactive and disabled for service.
System action: None.
User response: None.
EQQU044I AUTOMATIC RECOVERY UNAVAILABLE: CHECK OPCOPTS INIT. STATEMENT
Explanation: Automatic recovery is unavailable because RECOVERY(NO) is specified on the OPCOPTS
initialization statement.
System action: The request is rejected.
User response: If automatic recovery is required, contact your system programmer.
System programmer response: Change the OPCOPTS initialization statement to RECOVERY(YES).

 Copyright IBM Corp. 1991, 1999

331

332

Tivoli OPC Messages and Codes

EQQV000E EQQV005E

Chapter 31. EQQVnnn Messages
EQQV000E DUPLICATE NAMES IN THE ROUTOPTS SNA DESTINATIONS
Explanation: One or names in the SNA keyword destination list in the ROUTOPTS inititialization statement is a
duplicate of an existing name. These names are the application names of potential session partners and must be
unique.
System action: The NCF processing is terminated.
System programmer response: Correct the name (or names) in error and restart the subsystem.
EQQV001I NCF APPLICATION STARTED
Explanation: The NCF task has received control from the Tivoli OPC subsystem and is about to start initialization
processing.
System action: The NCF continues processing.
User response: None.
EQQV002E NCF APPLICATION TERMINATED - SETLOGON EXECUTION FAILURE
Explanation: A VTAM SETLOGON macro used for enabling the NCF logon processing has failed. The reason for
this failure is defined in detail by message EQQV015E, which precedes this message in the Tivoli OPC message log.
System action: The NCF processing is terminated.
Problem determination: Review message EQQV015E to determine the exact reason for the failure.
System programmer response: Correct the error (or errors) and restart the subsystem.
EQQV003E INITIALIZATION FAILED - SNA DESTINATION NOT SPECIFIED IN TRROPTS
Explanation: In a tracker system, the NCF initialization processing failed because no partner application IDs were
specified in the SNAHOST keyword of the TRROPTS statement
System action: The NCF processing is terminated.
System programmer response: Add the missing information and restart the subsystem.
EQQV004E NCF APPLICATION TERMINATED - PARAMETER PROCESSING FAILURE
Explanation: The NCF initialization processing encountered an error in the parameters defined for it.
System action: The NCF processing is terminated.
Problem determination: Review earlier messages in the Tivoli OPC message log to determine the exact reason for
the failure.
System programmer response: Correct all errors and restart the subsystem.
EQQV005E NCF APPLICATION TERMINATED - INITIALIZATION PROCESSING FAILURE
Explanation: The NCF initialization processing failed. Messages issued preceding this message define the cause of
the failure.
System action: The NCF processing is terminated.
Problem determination: Review earlier messages in the Tivoli OPC message log to determine the exact reason for
the failure.
System programmer response: Correct all errors and restart the subsystem.

 Copyright IBM Corp. 1991, 1999

333

EQQV006I EQQV011E

EQQV006I NCF APPLICATION ENDED
Explanation: The NCF processing has completed and control is returned to the Tivoli OPC subsystem.
System action: The NCF processing is terminated.
User response: None.
EQQV007E INITIALIZATION FAILED - SNA DESTINATION NOT SPECIFIED IN ROUTOPTS
Explanation: In a controller system, the NCF initialization processing failed because no partner application IDs were
specified in the SNA keyword of the ROUTOPTS statement.
System action: The NCF processing is terminated.
System programmer response: Add the missing information and restart the subsystem.
EQQV008I INITIALIZATION FAILED - SUBSYSTEM STOP REQUESTED
Explanation: The NCF received a subsystem stop request while in the initialization phase. The NCF was most likely
waiting for some other Tivoli OPC resource to become active.
System action: The NCF processing is terminated.
User response: None.
EQQV009E INITIALIZATION FAILED - NCFAPPL KEYWORD NOT SPECIFIED OR INVALID
Explanation: The NCF initialization processing failed because the NCFAPPL keyword was not specified or was
invalid.
System action: The NCF initialization processing is terminated.
System programmer response: Add the missing information and restart the subsystem.
EQQV010E NIB BUILD PROCESSING FAILED - R15 = R15 R00 = R00
Explanation: The GENCB macro request issued to generate a NIB block did not complete normally.
System action: The NCF processing is terminated.
Problem determination: Use the R15 and R00 return codes to determine the cause of the error. For more
information, refer to the appropriate documentation for the VTAM product installed on this MVS system.
System programmer response: If insufficient main storage was the cause of the failure, increase the region size
and restart the Tivoli OPC subsystem. For any other cause of the failure, contact your IBM representative.
EQQV011E RPL BUILD PROCESSING FAILED - R15 = R15 R00 = R00
Explanation: The GENCB macro request issued to generate an RPL block did not complete normally.
System action: The NCF processing is terminated.
Problem determination: Use the R15 and R00 return codes to determine the cause of the error. For more
information, refer to the appropriate documentation for the VTAM product installed on this MVS system.
System programmer response: If insufficient main storage was the cause of the failure, increase the region size
and restart the Tivoli OPC subsystem. For any other cause of the failure, contact your IBM representative.

334

Tivoli OPC Messages and Codes

EQQV012E EQQV015E

EQQV012E NIB EXLST BUILD PROCESSING FAILED - R15 = R15 R00 = R00
Explanation: The GENCB macro request issued to generate a NIB EXLST block did not complete.
System action: The NCF processing is terminated.
Problem determination: Use the R15 and R00 return codes to determine the cause of the error. For more
information, refer to the appropriate documentation for the VTAM product installed on this MVS system.
System programmer response: If insufficient main storage was the cause of the failure, increase the region size
and restart the Tivoli OPC subsystem. For any other cause of the failure, contact your IBM representative.
EQQV013E ACB EXLST BUILD PROCESSING FAILED - R15 = R15 R00 = R00
Explanation: The GENCB macro request issued to generate a ACB EXLST block did not complete normally.
System action: The NCF processing is terminated.
Problem determination: Use the R15 and R00 return codes to determine the cause of the error. For more
information, refer to the appropriate documentation for the VTAM product installed on this MVS system.
System programmer response: If insufficient main storage was the cause of the failure, increase the region size
and restart the Tivoli OPC subsystem. For any other cause of the failure, contact your IBM representative.
EQQV014E ACB BUILD PROCESSING FAILED - R15 = R15 R00 = R00
Explanation: The GENCB macro request issued to generate the NCF ACB did not complete normally.
System action: The NCF processing is terminated.
Problem determination: Use the R15 and R00 return codes to determine the cause of the error. For more
information, refer to the appropriate documentation for the VTAM product installed on this MVS system.
System programmer response: If insufficient main storage was the cause of the failure, increase the region size
and restart the Tivoli OPC subsystem. For any other cause of the failure, contact your IBM representative.
EQQV015E VTAM MACRO REQUEST FAILURE - DIAGNOSTIC INFORMATION: NODE = NODE, REQUEST =
X'REQ' (NAMEREQ), RTNCD = X'RC' (DECRC) FDBK2 = X'FDBK2' (DFDBK2), SSENSMI = SMI
USENSEI = USEI, SSENSEI = SSEI R00 = X'R00', R15 = X'R15'
Explanation: An error occurred when a VTAM request was executed or scheduled. The variable items in the
message provide diagnostic information and have the following meanings:
NODE
REQ
NAMEREQ
RC
DECRC
FDBK2
DFDBK2
SMI
USEI
SSEI
R00
R15

NCF application LU-name
VTAM request code in hexadecimal
VTAM request name
RTNCD feedback field value from RPL in hexadecimal
RTNCD feedback field value from RPL in decimal
FDBK2 feedback field value from RPL in hexadecimal
FDBK2 feedback field value from RPL in decimal
System sense modifier information from RPL
User sense information from RPL
System sense information from RPL
Register 0 return code after a VTAM macro request
Register 15 return code after a VTAM macro request.

System action: The action taken depends on the severity of the error situation. The NCF attempts to continue
processing, if at all possible. For the most serious errors, for example, undefined feedback code, the NCF abends
with a dump and a user code.
Problem determination: Use the diagnostic information in the message to determine the cause of the error. For
more information, refer to the appropriate documentation for the VTAM product installed on this MVS system.
System programmer response: Analyze the diagnostic information and the dump, if produced, to determine the
cause of the failure. If this was not a user error, contact your IBM representative.

Chapter 31. EQQVnnn Messages

335

EQQV016E EQQV021W

EQQV016E NAMEREQ REQUEST FAILURE - LU/APPLICATION NODE NOT FOUND
Explanation: The VTAM NAMEREQ request failed to complete successfully because the LU-name NODE could not
be found. The most likely reason for the failure is either an invalid specification of an LU-name in the SNAHOST
keyword of the TRROPTS initialization statement or the name NODE has not been properly defined to VTAM.
System action: The NCF processing is terminated.
System programmer response: Review the name specified in the SNAHOST keyword. Make sure that it is correct
and that a counterpart exists in the VTAM definition statements. Correct the items in error and restart NCF.
EQQV017E NAMEREQ REQUEST FAILURE - LU/APPLICATION NODE NOT ACTIVE
Explanation: The VTAM NAMEREQ request failed to complete successfully because the LU-name NODE was not
active.
System action: The NCF processing is terminated.
System programmer response: Investigate why NODE suddenly became inactive. Restart NCF when NODE is
active again.
EQQV018E NAMEREQ REQUEST FAILURE - VTAM ERROR, OR NCP/VTAM INCOMPATIBILITY
Explanation: The VTAM NAMEREQ request failed to complete successfully because there was an error in VTAM or
an NCP/VTAM incompatibility. This message is preceded by message EQQV015E in the Tivoli OPC message log.
System action: The NCF processing is terminated.
Problem determination: Refer to message EQQV015E to determine the cause of the failure.
System programmer response: Restart NCF when the VTAM errors have been corrected.
EQQV019E SESSION SETUP FAILED - PLU=LU NOT AVAILABLE
Explanation: The NCF has not been able to establish a session because of one of the following reasons:
The Tivoli OPC controller is not started.
The NCF task in the Tivoli OPC controller is not available.
The LU specified in the SNAHOST keyword of the TRROPTS initialization is not active or is not defined.
The NCF retries every 10 seconds until it is successful, or until the subsystem is stopped, or until the NCF is
deactivated.
System action: The NCF continues to attempt to establish the LU-LU session.
System programmer response: Review the name specified in the SNAHOST keyword of the TRROPTS
initialization statement and make sure that it is the correct one. If it is correct, ask the system operator at the Tivoli
OPC controller system to activate the required resource.
EQQV020I ACB SUCCESSFULLY CLOSED
Explanation: The NCF has been successfully disconnected from VTAM.
System action: The NCF termination processing continues.
EQQV021W UNABLE TO CLOSE ACB
Explanation: The NCF is unable to successfully disconnect from VTAM.
System action: The NCF termination processing continues even though the ACB could not be closed.
Problem determination: It is most likely that a VTAM error has caused this error. Check the system log for VTAM
error messages that can be related to this failure.
System programmer response: None.

336

Tivoli OPC Messages and Codes

EQQV022E EQQV026E

EQQV022E LOGON ATTEMPTED BY UNDEFINED LU/APPLICATION LU - CLSDST ISSUED
Explanation: A session establishment attempt was made by a remote NCF application unknown to this host Tivoli
OPC subsystem. This message is issued only for a NCF application at a Tivoli OPC host.
System action: The request for the session is turned down by issuing a CLSDST macro. Processing continues for
the Tivoli OPC host NCF application.
Problem determination: It is most likely that a name in the ROUTOPTS SNA keyword list of names has been
misspelled or left out entirely.
System programmer response: Stop the NCF task for which erroneous specifications have been given. Correct
the specifications on the ROUTOPTS statement and restart the NCF.
EQQV023E LOGON REQUEST FOR LU/APPLICATION LU THAT IS ACTIVE - CLSDST ISSUED
Explanation: A session establishment attempt is made from a remote NCF application that is already in session with
the Tivoli OPC host NCF application. This message is issued only for a NCF application at a Tivoli OPC host.
System action: The request for a session is turned down and NCF processing continues.
Problem determination: The most likely reason for this error is that more than one remote NCF application has the
same LU-name specified. Check the NCFAPPL keyword of the OPCOPTS statement for all remote NCF applications
and make sure that they are unique.
System programmer response: Stop all NCF tasks that have incorrect NCFAPPL keyword specifications. Correct
the NCFAPPL specifications and restart the NCF tasks.
EQQV024I ACB SUCCESSFULLY OPENED
Explanation: The NCF has successfully established contact with VTAM and is ready for further VTAM processing.
System action: The NCF processing continues.
User response: None.
EQQV025I ACB OPEN FAILURE (RC=X'RC') - VTAM SHUTTING DOWN
Explanation: The NCF was unable to establish contact with VTAM due to an OPEN ACB failure. RC is the ACB
error flag value in hexadecimal.
System action: The NCF continues processing.
User response: None.
EQQV026E ACB OPEN FAILURE (RC=X'RC') - NCF IMPROPERLY DEFINED
Explanation: The NCF was unable to establish contact with VTAM due to an OPEN ACB failure. RC is the ACB
error flag value in hexadecimal.
System action: The NCF processing is terminated.
Problem determination: Use the return code to determine the cause of the error. For more information, refer to the
appropriate documentation for the VTAM product installed on this MVS system.
System programmer response: Correct the problem and restart Tivoli OPC.

Chapter 31. EQQVnnn Messages

337

EQQV027E EQQV033E

EQQV027E ACB OPEN FAILURE (RC=X'RC') - ABEND 1104 DUE TO SERIOUS ERROR
Explanation: The NCF was unable to establish contact with VTAM due to an OPEN ACB failure. RC is the ACB
error flag value in hexadecimal.
System action: The NCF processing is abnormally terminated with a dump (abend code 1104).
Problem determination: Use the R15 and R00 return codes to determine the cause of the error. For more
information, refer to the appropriate documentation for the VTAM product installed on this MVS system.
System programmer response: Analyze the 1104 abend dump. If this was not a user error, contact your IBM
representative.
EQQV028W ACB OPEN FAILED FOR THE LAST 2 MINUTES - VTAM NOT ACTIVE
Explanation: The NCF failed to establish contact with VTAM during the last two minutes because VTAM was not
active. The NCF attempts to establish contact every 10 seconds until contact is made. This message is issued every
two minutes until contact is made.
System action: THe NCF continues to attempt to establish contact with VTAM until contact is made or until the
Tivoli OPC subsystem is stopped.
System programmer response: Ask your network operator to activate VTAM.
EQQV029I VTAM TERMINATION, OR NCF DEACTIVATION, STOPPED SESSION SETUP ATTEMPTS
Explanation: Session initiation attempts were stopped because VTAM is terminating or the NCF application was
deactivated.
System action: The NCF termination processing continues.
User response: None.
EQQV031I SUBSYSTEM STOP REQUEST TERMINATED SESSION SETUP ATTEMPTS
Explanation: A remote NCF application was in the process of initiating a session when the subsystem was stopped.
System action: The NCF termination processing continues.
Operator response: None.
EQQV032I SUBSYSTEM STOP REQUEST TERMINATED ACB OPEN ATTEMPTS
Explanation: The NCF was in the process of establishing contact with VTAM when the subsystem was stopped.
System action: The NCF termination processing continues.
Operator response: None.
EQQV033E ACB OPEN FAILED FOR THE LAST 2 MINUTES - NCF APPLICATION NOT ACTIVE
Explanation: The NCF failed to establish contact with VTAM during the last two minutes because the NCF
application was not activated. The NCF attempts to establish contact every 10 seconds until contact is made. This
message is issued every two minutes until contact is established.
System action: The NCF continues to attempt to establish contact with VTAM until contact is made or until the Tivoli
OPC subsystem is stopped.
System programmer response: Ask the network operator to activate the VTAM LUs.

338

Tivoli OPC Messages and Codes

EQQV034E EQQV040I

EQQV034E NAMEREQ REQUEST FAILURE - LU/APPLICATION NODE INHIBITED
Explanation: The VTAM NAMEREQ request failed to complete successfully because the LU-name NODE was
inhibited. The most likely reason for the failure is that either the cross-domain NCF partner NODE has been
deactivated or the partner VTAM system has been taken down.
System action: If NAMEREQ is the REQSESS request, the NCF continues processing with session establishment
attempts every 10 seconds. For other VTAM requests, NCF processing is terminated.
System programmer response: Ask the network operator to activate the VTAM or NCF application, or both
applications, on the cross-domain partner system.
EQQV036I SESSION HOME-DEST ESTABLISHED
Explanation: A session has been established between the home application HOME and the destination application
DEST.
System action: The NCF continues processing.
Operator response: None.
EQQV037I SESSION HOME-DEST ENDED
Explanation: The session between the home application HOME and the destination application DEST has ended.
System action: The NCF continues processing.
Operator response: None.
EQQV038E DESTINATION LU INCONSISTENTLY SPECIFIED
Explanation: A destination that runs the Tivoli OPC NCF has been specified on the OPCAV1R2 keyword of the
ROUTOPTS initialization statement.
System action: The NCF continues processing.
System programmer response: Correct the OPCAV1R2 keyword of the ROUTOPTS initialization statement and
restart Tivoli OPC.
EQQV039E DESTINATION LU NOT SPECIFIED AS OPC/A V1R2 NEC
Explanation: A destination that runs OPC/A Version 1 Release 2 NEC is not specified on the OPCAV1R2 keyword
of the ROUTOPTS initialization statement.
System action: The NCF continues processing.
System programmer response: Correct the OPCAV1R2 keyword of the ROUTOPTS initialization statement and
restart Tivoli OPC.
EQQV040I CURRENTLY RUNNING WITH 'LU' AS CONTROLLER
Explanation: The NCF in a Tivoli OPC tracker system has received a controller identification.
System action: NCF continues processing.
User response: None.

Chapter 31. EQQVnnn Messages

339

EQQV041E EQQV045E

EQQV041E THE NCF TASK IGNORED THE FOLLOWING ELEMENT ON THE NCF QUEUE DQE
Explanation: An invalid element has been found by the NCF task. Possibly, the first four bytes of the element do
not match the Tivoli OPC character string 'DQE '. (The fourth byte is a blank space.)
If EQQV039E was issued previously, EQQV041E is issued for all elements containing the destination specified in
EQQV039E.
System action: The NCF task does no more processing of the element, but continues normal processing.
System programmer response: If EQQV039E was issued previously, perform the actions described for that
message. Otherwise, save the Tivoli OPC message log dataset containing this error message and contact your IBM
representative.
EQQV042E THE NCF TASK IGNORED THE FOLLOWING DATA, RECEIVED FROM 'NODE' DQE
Explanation: The receiving NCF task did not recognize the type of data received from the application. This
message is issued once for every invalid receive operation.
System action: The NCF continues processing
System programmer response: Verify that the session parameters specified in the VTAM LOGMODE table are
valid. Especially check that the ru-sizes are not zero.
If this message occurs during normal execution and the VTAM LOGMODE definitions are correctly specified, contact
your IBM representative.
EQQV043E INVALID RU-SIZE SPECIFIED IN 'LU' SESSION PARAMETERS
Explanation: The ru-sizes specified in the session parameters are not valid.
System action: The NCF continues processing, but the specified session is not established.
System programmer response: Verify that the ru-sizes specified in the tracker node are valid. If necessary, specify
different ru-sizes, and stop and restart the tracker NCF.
EQQV044E OPNDST FAILURE WHEN CONFIRMING SESSION WITH TRACKER 'LU'
Explanation: The OPNDST macro issued to confirm session establishment between the NCF controller and a
remote tracker failed. The most likely reason for the failure is that either there is no active route back to the tracker
from the controller node or the VTAM environment of the tracker requesting the session is going down.
System action: The NCF continues processing and the NCF controller logon exit is ready to handle subsequent
logon attempts from the remote tracker.
System programmer response: Ask the network operator to activate the necessary links to secure an active route
back to the tracker.
EQQV045E THE NCF TASK HAS BEEN CONTACTED BY AN UNKNOWN DESTINATION: LU
Explanation: The NCF task has recognized a session control request from a destination that is not defined in the
ROUTOPTS or TRROPTS initialization statement. One possible reason for this message is that an APPC program is
attempting to allocate a conversation with another APPC program, but is mistakenly using the LU name of the NCF
program.
System action: A bind request from an unknown destination is rejected and the NCF continues normal processing.
If an APPC program is attempting to allocate a conversation it gets a failing return code from the APPC service
routine.
Problem determination: Use the name of the unknown destination to determine which program and which location
is attempting to access NCF resources.
System programmer response: If the NCF task should support the destination specified in this message, update
the ROUTOPTS or TRROPTS initialization statement and restart the Tivoli OPC subsystem. If an APPC program is
attempting to allocate a conversation with APPC functions in a Tivoli OPC controller system, inform the owner of the
APPC program at the remote location of the LU name that is to be used if APPC services are to be provided. This LU
name is defined by an APPCPMxx member in the SYS1.PARMLIB library.

340

Tivoli OPC Messages and Codes

EQQWL10W EQQWL15I

Chapter 32. EQQWLnn Messages
EQQWL10W WORK STATION WSID, HAS BEEN SET TO STAT STATUS
Explanation: The status of a workstation has changed. An authorized user may have changed the status. This
message may also be caused by a system failure or by a workstation becoming available again.
System action: The status of the workstation is changed. This may effect the ongoing work.
User response: If you do not want the workstation to have this status, use the Tivoli OPC dialog to change the
status.
EQQWL11I ACTIONS ARE: FAILACT, RERACT, STARTACT
Explanation: The previous message, EQQWL12I, identifies which workstation has a new status. This message
documents the actions defined for the workstation.

FAILACT

Represents the restart policy for started operations at this workstation, specified in installation
parameters or by a manual request to vary the workstation status.

RERACT

Represents the reroute actions for ready operations (status A, R, or *) from this point on.

STARTACT

Represents the actions that are taken when the workstation is made available again, either automatically
or by a manual activate request.

System action: The actions described in this message are performed for operations on the workstation identified in
message EQQWL12I.
User response: If you want different actions, use the Modify Current Plan dialog to change them.
EQQWL12I WORK STATION WSID IS MANUALLY VARIED TO STATUS STATUS
Explanation: You have used the Tivoli OPC dialog. to change the status of a workstation. This message is followed
by EQQWL11, which indicates the restart, reroute, and start actions.
System action: The status of the workstation is changed. If the status is changed to failed or offline, a restart or
reroute action may be performed.
User response: Verify that you want the workstation to have this status.
EQQWL13I REROUTING IN EFFECT FOR WORK STATION WSID
Explanation: The workstation indicated in the message is unavailable to receive work. Tivoli OPC routes work
scheduled for this workstation to another workstation.
System action: Operations are not started on this workstation.
User response: Verify that the workstation should be unavailable.
EQQWL15I REROUTING IS WITHDRAWN
Explanation: Work that was previously scheduled for this workstation was routed to another workstation. This
workstation is available again.
This message may follow message EQQWL10W or EQQWL12I.
System action: Work is now scheduled on this workstation.
User response: None.

 Copyright IBM Corp. 1991, 1999

341

EQQWL21W EQQWL30E

EQQWL21W EVENT EVENT IGNORED FOR WORK STATION WSID
Explanation: An event has been received that is not possible because of the status of the workstation.
You cannot change the status of a workstation to its existing status. For example, if a workstation already has failed
status, a failure event produces this message.
System action: The event is ignored. The workstation status does not change.
User response: Verify that the Tivoli OPC status of the workstation is correct. If the status is incorrect, use the
Tivoli OPC dialog to correct it.
EQQWL22I WORK STATION IS IN STATUS STAT
Explanation: This message follows message EQQWL21W.
System action: None.
User response: None.
EQQWL23W WORK STATION WSID IS PENDING ONLINE. MANUAL ACTION REQUIRED
Explanation: An automatic online event has been received for the destination represented by this workstation.
Either the workstation status is offline and the WSOFFLINE activate action is MANUAL or the workstation status is
failed and the WSFAILURE activate action is MANUAL.
This message is for information only.
System action: The status of the workstation does not change until you activate it manually from the Tivoli OPC
dialog.
User response: If you want to activate the workstation, use the Modify Current Plan Work Station communication
dialog.

| EQQWL24W A FAIL EVENT IS IGNORED. WORK STATION WSID IS ALREADY OFFLINE
Explanation: A failure event has been received for an XCF workstation that has already been set to offline. Since
the offline event was received first, the workstation does not subsequently change status to failure.
System action: The event is ignored. The workstation status does not change. The WSOFFLINE actions are taken.
User response: Verify the reasons for the offline and failure events. If you wish different actions to be taken, review
your WSOFFLINE and WSFAILURE keywords and adjust them as necessary.
EQQWL30E LOOP IN ALTERNATE WORK STATIONS. FIRST WS IS: WSID
Explanation: This workstation has been put in reroute mode. This workstation is part of a circular set of alternative
workstations. For example, workstation A reroutes to B, B to C, and C to A.
All of the other workstations in the circle are unavailable. Thus, this workstation must perform the impossible task of
rerouting messages to itself.
System action: No rerouting is performed for the workstation indicated in the message. This may affect the
workload to be scheduled for this workstation.
User response: Use the Tivoli OPC dialog to check the names for the alternative workstation starting with this
workstation. Correct any workstation specifications that are incorrect.
To make the operations scheduled to start on this workstation eligible for Tivoli OPC scheduling, you must perform
manual actions. If no actions are taken, the operations on this workstation remain in RE status until a workstation
available event is received by the Tivoli OPC controller.

342

Tivoli OPC Messages and Codes

EQQWL31E EQQWL40W

EQQWL31E REROUTE ATTEMPT OF OPERATION NAMED OP, WITH APPL IA APPL FAILED
Explanation: Rerouting could not be performed for this operation. Either reroute parameters are incorrect or an
offline or failure situation caused Tivoli OPC to try to reroute an operation that is not reroutable.
System action: The operation remains in the current status. If the workstation that this operation uses is not active,
the operation is not started.
User response: If the operation should be rerouted, change the reroute parameter.
EQQWL32I NO ALTERNATE WORK STATION FOUND
Explanation: This message follows EQQWL31E. It indicates the specific problem.
System action: None.
User response: None.
EQQWL35E RESTART ATTEMPT OF OPERATION OP, IN APPL APPL FAILED
Explanation: This operation was not restarted successfully, because of incorrect restart parameters.
System action: The operation is set to RE status.
User response: Use the Modify Current Plan dialog to correct the restart parameters for this application or operation.
EQQWL40W OPERATION JOBNAME, OP IS FORCED TO ENDED IN ERROR STATUS
Explanation: A manual vary offline command was issued for the workstation on which this operation has started.
System action: The status of the operation is set to ended-in-error. The operation may be restarted or rerouted.
Any further tracking information for the operation is ignored.
Restarting or rerouting an operation that has already started may cause an integrity problem.
User response: If the Tivoli OPC reroute and restart actions are inappropriate for this operation, use the Tivoli OPC
dialog either to cancel the operation or to change its status.

Chapter 32. EQQWLnn Messages

343

344

Tivoli OPC Messages and Codes

EQQW000E EQQW006E

Chapter 33. EQQWnnn Messages
EQQW000E NO AUTHORITY TO ACCESS THE WORK STATION DESCRIPTION
Explanation: You have attempted to access the workstation description database, but you are not authorized to
access it. Or, you do not have access authority to at least one of the following Tivoli OPC resources that are used
together with the workstation description database: the application description database, the calendar database, or the
operator instruction database.
System action: The request is rejected and the system waits for you to respond.
User response: Contact your security administrator.
EQQW001E NO AUTHORITY TO UPDATE THE WORK STATION DESCRIPTION
Explanation: You have attempted to update the workstation description database, but you are not authorized to
update it. Or, you do not have access authority to at least one of the following Tivoli OPC resources that are used
together with the workstation description database: the application description database, the calendar database, or the
operator instruction database.
System action: The request is rejected and the system waits for you to respond.
User response: Contact your security administrator.
EQQW002I WORK STATION DESCRIPTION HAS BEEN UPDATED
Explanation: The workstation description record has been updated and added to the workstation description
database.
System action: None.
User response: None.
EQQW003I WORK STATION DESCRIPTION HAS BEEN DELETED
Explanation: The workstation description record has been deleted from the workstation description database.
System action: None.
User response: None.
EQQW004I WORK STATION DESCRIPTION HAS BEEN CREATED
Explanation: The workstation description record has been created and added to the workstation description
database.
System action: None.
User response: None.
EQQW005E DESCRIPTION BEING UPDATED BY ANOTHER USER, TRY LATER
Explanation: You cannot update a workstation description that is being updated by another user.
System action: The system waits for you to respond.
User response: Try again later.
EQQW006E DUPLICATE NAME - WORK STATION DESCRIPTION CANNOT BE CREATED
Explanation: You have attempted to create a workstation description with a name that already exists in the
workstation description database.
System action: The system waits for you to respond.
User response: Use another name for the workstation description.

 Copyright IBM Corp. 1991, 1999

345

EQQW007E EQQW013E

EQQW007E UNABLE TO READ WORK STATION DESCRIPTION RECORD
Explanation: The workstation description record could not be read because either it may have been deleted by
another user or an error in the workstation description database meant that it could not be read.
System action: The system waits for you to respond.
User response: Go back to the previous panel and retry. If the error persists, contact your system programmer.
System programmer response: Contact your IBM representative.
EQQW010W THE JCC INCIDENT FILE IS NOT AVAILABLE. ERROR CODE = ERRCODE
Explanation: The job completion checker (JCC) incident log dataset cannot be used. Valid values for the error code
ERRCODE are:
001
004
005
006
008
009
012

No incident log dataset name was defined in the JCCOPTS statement.
The incident log dataset could not be allocated.
An unrecoverable error occurred writing to the incident work file.
The incident log dataset could not be unallocated.
The incident log dataset could not be opened.
The incident log work dataset could not be opened.
An unrecoverable I/O error occurred whilst writing to the incident log or the incident work dataset.

System action: The JCC continues processing without creating any incident records.
Problem determination: Review earlier messages in the Tivoli OPC message log to determine the exact reason for
this message.
System programmer response: Correct all errors and restart the JCC.
EQQW011I THE EVENT WRITER ENDED NORMALLY
Explanation: The intialization of the event writer has completed and the event writer has been requested to stop
execution.
System action: Tivoli OPC processing continues.
User response: None.
EQQW012E THE EVENT WRITER TERMINATED BECAUSE OF UNRECOVERABLE ERRORS
Explanation: The initialization of the event writer has completed, but a severe error caused the event writer to stop
execution.
System action: The event writer terminates execution. Message EQQZ045W is issued.
Problem determination: Review earlier messages in the Tivoli OPC message log to determine the exact reason for
this message.
System programmer response: Correct all errors and restart the event writer.
EQQW013E DISK SPACE WAS EXHAUSTED ON JCC INCIDENT FILE, DDNAME = DDNAME
Explanation: An end-of-volume error has been detected while writing to the incident log dataset (ddname
EQQINCFI) or the incident work dataset (ddname EQQINCWK).
System action: If the incident log dataset is full, the job completion checker (JCC) continues logging to the incident
work dataset. If the incident work dataset is full, the JCC issues message EQQW010W and stops writing incident log
records.
System programmer response: If the incident log dataset is full, either allocate a larger dataset or release space in
the current dataset.
If the incident work dataset is full, make sure that the JCC can allocate the incident log dataset. Empty the work
dataset by copying its contents to the incident log.
Restart the JCC to continue incident logging.

346

Tivoli OPC Messages and Codes

EQQW014E EQQW017E

EQQW014E THE JCC TASK ABENDED WHILE PROCESSING THE FOLLOWING EXIT RECORD: EXITREC
Explanation: An abend prevented the job completion checker (JCC) from processing all SYSOUT datasets for a
batch job.
System action: MVS recovery/termination is requested to generate a dump. The JCC attempts to continue normal
operation with the next ending job. The current job is put on the ended-in-error list with an error code of JCCE.
Problem determination: Review the SYSLOG dataset, the Tivoli OPC message log dataset, and the dump dataset
to determine the cause of the error.
Operator response: Note the job name and job number from the exit record. If necessary, set the correct status for
the job manually.
EQQW015E THE JOB COMPLETION CHECKER COULD NOT FIND ANY SYSOUT DATA SETS FOR JOB
JOBNAME(JOBNUM). REPEATED RETRIES HAVE FAILED
Explanation: The job completion checker (JCC) has tried to retrieve the SYSOUT datasets for a batch job but no
datasets have been returned by the JES.
System action: No more attempts to retrieve SYSOUT datasets are made for the current job. The JCC attempts to
continue normal operation with the next ending job. The current job is put on the ended-in-error list with an error code
of JCCE.
Problem determination: In a JES3 system, check that the JCC SYSOUT classes are defined as external writer
classes to JES3.
Operator response: Determine the current status of the job. If necessary, set the correct status for the job
manually.
System programmer response: If necessary, correct any incorrectly specified operands in the JCCOPTS statement
and restart the JCC.
EQQW016E AN UNRECOVERABLE I/O ERROR OCCURRED. SYNAD MESSAGE FOLLOWS: SYNMSG
Explanation: An I/O error occurred when the event writer was updating the event dataset.
System action: The event writer attempts to continue processing.
Problem determination: The SYNAD routine collects information such as jobname, stepname, unit address, device
type, ddname, operation, error description, and access method. The SYNADAF macro is used to extract this
information. For a detailed description of the layout refer to the appropriate documentation for the MVS/DFP product
installed on this MVS/ESA system.
System programmer response: Correct all errors and, if necessary, restart the event writer.
EQQW017E THE EVENT WRITER WAS UNABLE TO OPEN THE EVENT DATA SET
Explanation: The event writer could not open its output dataset, ddname EQQEVDS.
System action: The event writer issues message EQQW062E and is terminated.
Problem determination: Check that ddname EQQEVDS is correctly specified and that the Tivoli OPC started task is
authorized to open the dataset for update.
System programmer response: If necessary, restart the event writer.

Chapter 33. EQQWnnn Messages

347

EQQW018E EQQW022I

EQQW018E SYSOUT CLASS CLASS IS ALREADY BEING PROCESSED BY ANOTHER JCC TASK
Explanation: A job completion checker (JCC) task has been requested to process SYSOUT datasets in a SYSOUT
class that is already being processed by another JCC task on the same MVS system. The SYSOUT class can only
be processed by one JCC task at a time.
System action: The initialization of the JCC is terminated.
Problem determination: The JCC task is started when either JCCTASK(YES) or CATMLVL(step) is defined in the
OPCOPTS statement. When the JCC is started for catalog management actions, the class (or classes) processed by
this JCC can be defined in the CATMCLAS keyword of the JOBOPTS statement. If CATMCLAS is not defined, the
classes checked by the JCC task are automatically determined by Tivoli OPC from the MSGCLASS value of jobs and
started tasks executing on this system.
System programmer response: Check the values of JCCOPTS CHKCLASS and OPCOPTS CATMCLAS of all
Tivoli OPC subsystems started on the system. If you use catalog management at step level, consider including the
CATMCLAS keyword to define the held SYSOUT classes used for production processing. Make sure that you do not
start more than one subsystem with CATMLVL(STEP), unless you define CATMCLASS with different values for each
subsystem. Correct the error and restart the JCC task or the Tivoli OPC subsystem.
EQQW019E A SEVERE ERROR IN THE JCC TASK HAS CAUSED ONE OR MORE EVENTS TO BE LOST
Explanation: An abend in the job completion checker (JCC) queue processing routine prevented the JCC from
processing all queued jobs.
System action: MVS recovery/termination is requested to generate a dump. The JCC attempts to continue
processing.
Problem determination: Review the SYSLOG dataset, the Tivoli OPC message log dataset, and the dump dataset
to determine the cause of the error.
Operator response: Check the ready list for the computer workstation that is serviced by the abending JCC task.
Check that all operations that have the started status are in fact executing. If necessary, set the correct status for
jobs that are listed as started, but have completed execution.
EQQW021E THE EVENT WRITER OUTPUT DATA SET IS TOO SMALL
Explanation: The event writer requires that the event dataset is large enough to contain a minimum of 100 events.
The dataset defined by the ddname EQQEVDS does not fulfill this requirement.
System action: The event writer processing is terminated. Message EQQW062E is issued.
System programmer response: Allocate a larger event dataset. If necessary, restart Tivoli OPC to pick up the new
event dataset.
EQQW022I THE JOB COMPLETION CHECKER ENDED NORMALLY
Explanation: The initialization of the job completion checker (JCC) has completed and the JCC has been requested
to stop execution.
System action: Tivoli OPC continues processing.
User response: None.

348

Tivoli OPC Messages and Codes

EQQW023E EQQW026I

EQQW023E UNEXPECTED SUBSYSTEM REQUEST RETURN CODES FOR JOB JOBNAME(JOBNUM) REQUEST
TYPE: TYPE, R15: R15, SSOBRETN: SSOBRETN
Explanation: An error occurred when the job completion checker (JCC) was retrieving information from the JES
about job JOBNAME. The information request is either a status request (request type = CS) or a process SYSOUT
request (request type = SO). R15 and SSOBRETN are return codes from JES. JCC issues this message because
there is no code to handle this combination of return codes.
System action: An incident record is written to the JCC incident log and the job is flagged as having encountered a
JCC error.
Operator response: Set the correct status for the job manually and, if necessary, delete or requeue SYSOUT
datasets for the job.
EQQW024E THE EVENT WRITER ABENDED WHILE PROCESSING THE FOLLOWING EXIT RECORD: EXITREC
Explanation: An abend prevented the event writer from writing an event record to the event dataset.
System action: MVS recovery/termination is requested to generate a dump. The event writer attempts to continue
normal operation with the next queued event.
Problem determination: Review the SYSLOG dataset, the Tivoli OPC message log dataset, and the dump dataset
to determine the cause of the error.
Operator response: Note the job name and job number from the exit record. If necessary, set the correct status for
the job manually.
EQQW025W THE EVENT WRITER HAS IGNORED THE FOLLOWING INVALID EXIT RECORD: EXITREC
Explanation: An invalid event record EXITREC has been found by the event writer. The most likely reason is that
the last four bytes of the record do not contain the Tivoli OPC character string EQQ3. It is also possible that the first
three characters of the job ID field do not contain the character string JOB.
If the last four bytes of the record contain the character string ERA2, an abend has occurred during the event creation,
and the event contains the following information:
EXRJOBN
EXRJOBID
EXRCREAT
EXRRDATE+1
EXRRTIME

Name of the abending CSECT
Compile date of the abending CSECT
Compile time of the abending CSECT
Abend code (from SDWACMPC)
Offset in CSECT at which the abend occurred

If the last four bytes of the record contain the character string ERU2, the event creation has been called by an
unsupported exit, and the event contains the following information:
EXRJOBN

Name of the unsupported exit.

Refer to the Tivoli OPC Diagnosis Guide and Reference for details of the EXR control block.
System action: The event writer terminates processing of the event, but continues normal processing. If the invalid
event was of the ERA2 or ERU2 type (see previous explanations), the events are created only if a minimum of five
minutes have passed since the last creation of the same type.
Problem determination: If the message is issued for all events (in which case the event dataset is empty), check
that the EQQSSCMD module and the event writer are at the same release level.
System programmer response: Save the Tivoli OPC message log dataset (EQQMLOG) containing this error
message and contact your IBM representative.
EQQW026I THE JOB COMPLETION CHECKER STARTED
Explanation: The initialization of the job completion checker (JCC) has completed and the JCC is about to start
processing.
System action: Tivoli OPC processing continues.
User response: None.

Chapter 33. EQQWnnn Messages

349

EQQW027E EQQW031E

EQQW027E THE JOB COMPLETION CHECKER TERMINATED DUE TO UNRECOVERABLE ERRORS
Explanation: An abend has occurred in the job cpmpletion checker (JCC) task that is not related to the processing
of any specific job.
System action: MVS recovery/termination is requested to generate a dump. The JCC processing is terminated.
Problem determination: Review the SYSLOG dataset, the Tivoli OPC message log dataset, and the dump dataset
to determine the cause of the error.
System programmer response: Correct all errors and restart the JCC.
EQQW028E JOB COMPLETION CHECKER INITIALIZATION FAILED
Explanation: The job completion checker (JCC) could not acquire all resources required for normal operation. The
most likely reason is that either the JCC message library could not be opened or the library is incorrectly defined. It is
also possible that there was an error in the JCCOPTS statement.
System action: The JCC processing is terminated. Message EQQZ045W is issued.
Problem determination: Review earlier messages in the Tivoli OPC message log to determine the exact reason for
this message.
System programmer response: Correct all errors and restart the JCC.
EQQW029E JCC FOUND INVALID NUMERICS BETWEEN COLUMNS BCOL AND ECOL IN MEMBER MEMBER IN
THE EQQJCLIB MESSAGE TABLE FILE. INCORRECT RECORD FOLLOWS: MSGREC
Explanation: A message table record contains invalid information and cannot be used.
System action: The job completion checker (JCC) does not use the incorrect message library member. If the
member name is EQQGJCCT, message EQQW063E is issued. In all other cases, the JCC continues processing.
System programmer response: Correct the message table definition error and replace member MEMBER in the
EQQJCLIB message table dataset.
EQQW030I A DISK DATA SET WILL BE FORMATTED, DDNAME = DDNAME
Explanation: Tivoli OPC has started to format an event dataset or a submit/release dataset for the ddname
DDNAME.
System action: Tivoli OPC continues processing.
User response: None.
EQQW031E JCC ALLOCATION OF A SYSOUT DATA SET FAILED FOR JOBNAME(JOBNUM) DYNAMIC
ALLOCATION ERROR CODE: RETC, INFORMATION REASON CODE: RSNC
Explanation: The job completion checker (JCC) could not allocate a SYSOUT dataset for the job
JOBNAME(JOBNUM). The dynamic allocation error and information reason codes are given in hexadecimal.
System action: An incident record is written to the JCC incident log and the job is flagged as having encountered a
JCC error. The JCC stops processing the current job.
Problem determination: Use the DYNALLOC return code and reason code to determine the cause of the error. For
more information, refer to the appropriate DYNALLOC documentation for the currently active MVS system.
Operator response: Check that the correct status is set for the job. If necessary, set the status manually.
System programmer response: Look up the meaning of the dynamic allocation error and information reason codes,
and take appropriate action.

350

Tivoli OPC Messages and Codes

EQQW032E EQQW037E

EQQW032E THE JOB COMPLETION CHECKER LIBRARY, DDNAME EQQJCLIB, COULD NOT BE OPENED
Explanation: The job completion checker (JCC) could not open a required input dataset, ddname EQQJCLIB.
System action: The JCC processing is terminated. Message EQQW028E is issued.
Problem determination: Check that EQQJCLIB is correctly defined and that the Tivoli OPC started task is
authorized to open the dataset.
System programmer response: If necessary, restart the JCC.
EQQW033W JOB JOBNAME(JOBNUM) WILL NOT BE RELEASED. REPEATED RETRIES HAVE FAILED
Explanation: The event writer has received a release command on a submit/release dataset and was not able to
release job JOBNAME(JOBNUM) from hold status.
System action: No more attempts to release the job are made. The event writer continues processing.
Operator response: Determine the current status of the job. If necessary, release the job manually.
EQQW034E LRECL FOR THE JOB COMPLETION CHECKER LIBRARY, DDNAME EQQJCLIB, IS NOT VALID
Explanation: The job completion checker (JCC) cannot use the message table library dataset because its logical
record length is not 80 bytes.
System action: The JCC processing is terminated. Message EQQW028E is issued.
System programmer response: Check that EQQJCLIB is correctly defined. Correct all errors and restart the JCC.
EQQW035E JCC UNALLOCATION OF A SYSOUT DATA SET FAILED FOR JOBNAME(JOBNUM) DYNAMIC
ALLOCATION ERROR CODE: RETC, INFORMATION REASON CODE: RSNC
Explanation: An error occurred when the job completion checker (JCC) was deallocating a SYSOUT dataset for the
job JOBNAME(JOBNUM). The dynamic allocation error and information reason codes are given in hexadecimal.
System action: An incident record is written to the JCC incident log and the job is flagged as having encountered a
JCC error. The JCC stops processing the job.
Problem determination: Use the DYNALLOC return code and reason code to determine the cause of the error. For
more information, refer to the appropriate DYNALLOC documentation for the currently active MVS system.
Operator response: Check that the correct status is set for the job. If necessary, set the status manually.
EQQW036E JCC OPEN OF A SYSOUT DATA SET FAILED FOR JOBNAME(JOBNUM) DDNAME: DDNAME,
DSNAME: DSNAME
Explanation: An error occurred when the joc completion checker (JCC) was trying to open a SYSOUT dataset for
the job JOBNAME(JOBNUM).
System action: An incident record is written to the JCC incident log and the job is flagged as having encountered a
JCC error. The JCC stops processing the job.
Operator response: Check that the correct status is set for the job. If necessary, set the status manually.
System programmer response: Determine the reason for the JCC open failure. Correct all errors.
EQQW037E JCC ABEND CODE ABCODE OPENING A SYSOUT DATA SET FOR JOBNAME(JOBNUM) DDNAME:
DDNAME, DSNAME: DSNAME
Explanation: A serious error occurred when the job completion checker (JCC) was trying to open a SYSOUT
dataset for the job JOBNAME(JOBNUM).
System action: An incident record is written to the JCC incident log and the job is flagged as having encountered a
JCC error. The JCC stops processing the job.
Operator response: Check that the correct status is set for the job. If necessary, set the status manually.
System programmer response: Determine the reason for the abend. Correct all errors.

Chapter 33. EQQWnnn Messages

351

EQQW038I EQQW043E

EQQW038I A DISK DATA SET HAS BEEN FORMATTED, DDNAME = DDNAME
Explanation: Tivoli OPC has finished formatting an event dataset or a submit/release dataset for the ddname
DDNAME.
System action: Tivoli OPC continues processing.
User response: None.
EQQW039E JCC FOUND BAD HEXADECIMAL VALUE BETWEEN COLUMNS BCOL AND ECOL IN MEMBER
MEMBER IN THE EQQJCLIB MESSAGE TABLE FILE. INCORRECT RECORD FOLLOWS: MSGREC
Explanation: A message table record contains invalid information and cannot be used.
System action: The job completion checker (JCC) does not use the incorrect message library member. If the
member name is EQQGJCCT, message EQQW063E is issued. In all other cases, the JCC continues processing.
System programmer response: Correct the message table definition error and replace member MEMBER in the
EQQJCLIB message table dataset.
EQQW040W JOB JOBNAME(JOBNUM) WILL NOT BE RELEASED. RELEASE RECORD IS TOO OLD
Explanation: The event writer found a release request in a submit/release dataset that could not be executed. The
reason is that the request was older than the limit defined to the event writer by the SKIPTIME and SKIPDATE
keywords in the EWTROPTS statement.
System action: The event writer continues reading the submit/release dataset.
Operator response: If necessary, set the correct status for the job manually.
EQQW041W JCL BATCH WITH FIRST JOB JOBNAME WILL NOT BE SUBMITTED BECAUSE SUBMIT RECORD
IS TOO OLD
Explanation: The event writer found job submit records in a submit/release dataset that could not be processed.
The reason is that the records were older than the limit defined to the event writer by the SKIPTIME and SKIPDATE
keywords in the EWTROPTS statement.
System action: The event writer continues reading the submit/release dataset.
Operator response: If necessary, resubmit the job.
EQQW042W JCL BATCH WITH FIRST JOB JOBNAME WILL NOT BE SUBMITTED BECAUSE THE EVENT
WRITER DID NOT RECEIVE ALL SUBMIT RECORDS
Explanation: The event writer found job submit records in a submit/release dataset that could not be processed
because some submit records were missing.
System action: The event writer continues reading the submit/release dataset.
Problem determination: Check that only one Tivoli OPC subsystem is updating this submit/release dataset.
Operator response: If necessary, resubmit the job.
EQQW043E THE EVENT WRITER WAS UNABLE TO OPEN THE SUBMIT/RELEASE DATA SET
Explanation: The event writer could not open its input dataset, ddname EQQSUDS.
System action: The event writer issues message EQQW062E and is terminated.
Problem determination: Check that ddname EQQSUDS is correctly defined and that the Tivoli OPC started task is
authorized to open the dataset.
System programmer response: If necessary, restart the event writer.

352

Tivoli OPC Messages and Codes

EQQW044E EQQW048E

EQQW044E UNEXPECTED ERROR SUBMITTING JOB JOBNAME TO THE JES INTERNAL READER
Explanation: An error occurred when submitting the job JOBNAME to the JES.
System action: Tivoli OPC continues processing.
Operator response: If necessary, submit the job manually.
EQQW045W JCL BATCH WITH FIRST JOB JOBNAME WILL NOT BE SUBMITTED BECAUSE SUBMIT RECORDS
WERE RECEIVED IN INCORRECT ORDER BY THE EVENT WRITER
Explanation: The event writer found job submit records in a submit/release dataset that could not be processed
because the records were not in sequence.
System action: The event writer continues reading the submit/release dataset.
Problem determination: Check that only one Tivoli OPC subsystem is updating this submit/release dataset.
Operator response: If necessary, resubmit the job JOBNAME.
EQQW046E SEQUENCE NUMBER SEQNO IS ALREADY IN USE BY AN EVENT READER SUBTASK
Explanation: At initialization of the event writer, an event reader was already started with the sequence number
specified in the EWSEQNO keyword of EWTROPTS.
The number specified in the EWSEQNO keyword of EWTROPTS must be unique within the Tivoli OPC subsystem.
System action: The initialization of the event writer fails. The event writer task is terminated.
Tivoli OPC administrator response: Review the ERSEQNO keyword of the ERDROPTS initialization statements to
get a sequence number that is unused. Update the EWSEQNO keyword with a unique sequence number and use the
Tivoli OPC Modify command to restart the event writer task.
EQQW047W SUBMIT/RELEASE RECORDS WERE LOST BECAUSE THE SUBMIT/RELEASE DATA SET
BECAME FILLED WITH UNPROCESSED RECORDS
Explanation: The event writer could not process records in a submit/release dataset as fast as the sending Tivoli
OPC subsystem was generating them.
System action: The event writer tries to reposition on the oldest record in the dataset.
Operator response: Determine if any held jobs should be released and, if so, release them manually. Resubmit all
missing jobs.
System programmer response: Allocate a larger submit/release dataset and restart the event writer.
EQQW048E THE EVENT FILTERING EXIT, EQQUX004, ABENDED AND HAS BEEN DISABLED
Explanation: An abend in the event filtering exit prevented the event writer from writing an event record to the event
dataset.
System action: MVS recovery/termination is requested to generate a dump. The event writer attempts to continue
normal operation with the next queued event, but the event filtering exit is not called again.
Problem determination: Review the SYSLOG dataset, the Tivoli OPC message log dataset, and the dump dataset
to determine the cause of the error.
Operator response: Note the job name and job number from the exit record. If necessary, set the correct status for
the job manually.
System programmer response: Correct all errors and restart the event writer.

Chapter 33. EQQWnnn Messages

353

EQQW049E EQQW054I

EQQW049E UNABLE TO FORMAT DATA SET WITH DDNAME DDNAME BECAUSE THE DATA SET IS NOT A
SINGLE EXTENT, DISK RESIDENT, DATA SET
Explanation: Tivoli OPC was unable to format an event dataset or a submit/release dataset for the ddname
DDNAME. A dataset to be formatted must be a disk resident, single extent dataset.
System action: The Tivoli OPC function that uses the dataset fails to initialize correctly.
Operator response: None.
System programmer response: Correct the Tivoli OPC started task procedure and restart Tivoli OPC.
EQQW051E JOB JOBNAME COULD NOT BE SUBMITTED. REASON: AUTHORITY FOR RUSER USER,
SUPPLIED BY USER EXIT EQQUX001, COULD NOT BE DETERMINED
Explanation: A user ID was supplied by the submit exit, EQQUX001, and the job was then sent using the
submit/release dataset to the DRVP macro. The buffer pool was successfully built.
System action: The job is not submitted and Tivoli OPC continues normal processing.
User response: Make sure that the supplied user ID is defined to the external security manager.

| EQQW052E THE EVENT DATASET, DDNAME DDNAME, LRECL BLKSZ IS INVALIDLY DEFINED. DATASET IS
|
NOT USABLE
Explanation: The event dataset referenced by ddname DDNAME has been allocated with an invalid logical record
length.
System action: The initialization of the event writer fails.
Problem determination: An event dataset must have a logical record length (LRECL) not less than 100 and not
greater than 32000. Check that the LRECL is within the supported range.
System programmer response: Stop Tivoli OPC, reallocate the dataset and restart Tivoli OPC.
EQQW053E THE SYSOUT ARCHIVING EXIT, EQQUX005, ABENDED AND HAS BEEN DISABLED
Explanation: The sysout archiving exit, EQQUX005, abended while processing a job's SYSOUT dataset. Tivoli OPC
has disabled the exit for this type of function for the remainder of the Tivoli OPC session.
System action: MVS recovery/termination is requested to generate a dump. The exit is not called again for this
particular function, but Tivoli OPC continues processing.
Problem determination: Review the SYSLOG dataset, the Tivoli OPC message log, and the dump dataset to
determine the cause of the error.
System programmer response: Correct the error and, if necessary, restart the job completion checker (JCC) task
using the modify commands or restart the Tivoli OPC tracker.
EQQW054I THE JOB COMPLETION CHECKER IS BEING STARTED FOR CATALOG MANAGEMENT ACTIONS
Explanation: The job completion checker (JCC) has been started to perform catalog management step level restart

| functions. This is because the JOBLOGRETRIEVAL keyword in the OPCOPTS initialization statement has been set
| to a value other than NONE or DELAYEDDST and the JCC was not requested to be started by initialization
statements set by a user. This message is issued either when Tivoli OPC is started or when the JCC task is started
with an MVS modify command.
System action: The JCC is started.
User response: None.

354

Tivoli OPC Messages and Codes

EQQW055I EQQW061W

EQQW055I THE JOBLOG FOR JOBNAME JOBNUM DOES NOT CONTAIN ALL DATASETS REQUIRED BY THE
OPC CATALOG MANAGEMENT FUNCTION
Explanation: The job completion checker (JCC) has discovered that the job log for the current job does not contain
all job-log datasets needed by Tivoli OPC. The required datasets are JESJCL and JESYSMSG, and one or both of
them are missing.
System action: The JCC processing continues.
System programmer response: Verify that either the JES installation setup or the job does not suppress the
JESJCL or the JESYSMSG file, or both files, from being created.

| EQQW056W JOBNAME JOBNUM HAS NO HELD SYSOUT IN CLASS CLASS
Explanation: The CATMCLAS keyword specifies the SYSOUT class CLASS, but job JOBNAME with job ID
JOBNUM created output that is not held in this class.
System action: The job is tracked as normal, but the job log cannot be sent to the controller.
Problem determination: If the job-log output for the job is a held SYSOUT class, make sure the most current
EQQSSCMD lmod is active (see the SSCMNAME parameter).
System programmer response:

Make sure that the CATMCLAS keyword specifies only held SYSOUT classes.

| EQQW057I THE JOB COMPLETION CHECKER IS BEING STARTED FOR DATA STORE ONLY
| Explanation: The job completion checker (JCC) was started as a dummy JCC (JCCTASK DST). Its only function is
| to requeue the sysout to the OPC Data Store class.
| System action: None
| User response: None
| System programmer response: None.
EQQW060E SUBMIT/RELEASE SKIP LIMIT DATE OR TIME SKIPLIM IS NOT VALID
Explanation: Initialization of the event writer failed because an operand of the SKIPDATE or SKIPTIME keyword in
the EWTROPTS statement was incorrectly specified.
System action: The event writer processing is terminated.
Problem determination: None.
System programmer response: Correct the operand in the EWTROPTS statement and restart the event writer.
EQQW061W THE EVENT FILTERING EXIT LOAD MODULE, MODULE, COULD NOT BE LOADED
Explanation: The event writer could not locate the event filtering exit load module, EQQUX004.
System action: The event filtering exit is not used by the event writer.
Problem determination: None.
System programmer response: If the event filtering exit is meant to be used, make sure that the EQQUX004 load
module is present in a library that can be reached by Tivoli OPC. Correct all errors and, if necessary, restart the
event writer.

Chapter 33. EQQWnnn Messages

355

EQQW062E EQQW066E

EQQW062E EVENT WRITER INITIALIZATION FAILED
Explanation: The event writer could not acquire all resources required for normal operation. The most likely reason
is that the event dataset or a submit/release dataset could not be opened. It is also possible that there was an error
in the EWTROPTS statement.
System action: The event writer processing is terminated. Message EQQZ045W is issued.
Problem determination: Review earlier messages in the Tivoli OPC message log to determine the exact reason for
this message.
System programmer response: Correct all errors and restart the event writer.
EQQW063E THE JOB COMPLETION CHECKER WAS UNABLE TO BUILD THE GENERAL MESSAGE TABLE
Explanation: An error occurred while processing the general message table for the job completion checker (JCC).
The general message table is defined by member EQQGJCCT in the library defined by the EQQJCLIB DD statement.
System action: The initialization of the JCC fails.
Problem determination: Review earlier messages in the Tivoli OPC message log to determine the exact reason for
this message.
System programmer response: Correct all errors and restart the JCC.
EQQW064E THE JOB COMPLETION CHECKER WAS UNABLE TO BUILD THE JOB MESSAGE TABLE FOR
JOB JOBNAME(JOBNUM)
Explanation: An error occurred while processing the message table for the specified job in the job completion
checker (JCC). The job message table is defined by member JOBNAME in the library defined by the EQQJCLIB DD
statement.
System action: An incident record is written to the JCC incident log and the job is flagged as having encountered a
JCC error.
Problem determination: Review earlier messages in the Tivoli OPC message log to determine the exact reason for
this message.
Operator response: Set the correct status for the job manually and, if necessary, delete or requeue SYSOUT
datasets for the job.
System programmer response: Correct all errors in the job message table.
EQQW065I EVENT WRITER STARTED
Explanation: The initialization of the event writer has completed and the event writer is now about to start
processing.
System action: Tivoli OPC continues processing.
User response: None.
EQQW066E JCC WAS UNABLE TO ALLOCATE STORAGE TO PROCESS MEMBER MEMBER OF EQQJCLIB
Explanation: An error occurred when allocating storage for a job message table.
System action: Message EQQW064E is issued.
Problem determination: None.
System programmer response: Stop Tivoli OPC and restart it in a larger region.

356

Tivoli OPC Messages and Codes

EQQW067E EQQW072E

EQQW067E A SEVERE ERROR IN THE EVENT WRITER HAS CAUSED LOSS OF CSA EVENT BUFFERS
Explanation: An abend in the queue processing routine of the event writer prevented the event writer from returning
all event buffers to the free chain.
System action: MVS recovery/termination is requested to generate a dump. The event writer attempts to continue
processing.
Problem determination: Review the SYSLOG dataset, the Tivoli OPC message log dataset, and the dump dataset
to determine the cause of the error.
System programmer response: None.
EQQW068E JCC WAS UNABLE TO FIND MEMBER MEMBER IN EQQJCLIB MESSAGE TABLE FILE
Explanation: The general message table member MEMBER of the job completion checker (JCC) could not be found
in the library defined by the EQQJCLIB DD statement.
System action: Message EQQW063E is issued.
System programmer response: Create a general message table member for the JCC and add it to the EQQJCLIB
library.
EQQW069E MEMBER MEMBER IN EQQJCLIB MESSAGE TABLE FILE IS EMPTY
Explanation: The general message table member MEMBER of the job completion checker (JCC) exists in the library
defined by the EQQJCLIB DD statement, but there are no records in the member.
System action: If the member name is EQQGJCCT, message EQQW063E is issued. If not, the JCC continues
processing.
System programmer response: If necessary, add the correct message table member to the EQQJCLIB library.
EQQW070I THE EW CANNOT REPOSITION AT RESTART POSITION: CYC REC
Explanation: An event writer is started in event reader mode (with an EWSEQNO). The event writer cannot position
on the event dataset with the event dataset position that it has received. The restart position was probably overwritten
when the event dataset wrapped around.
System action: The event writer continues normal processing.
Tivoli OPC administrator response: The event dataset may be too small. Make sure that it is large enough to hold
all the generated events when the connection between the controller and the tracker with the started event writer is
down.
EQQW071I UNKNOWN RECORD TYPE SKIPPED BECAUSE IT IS TOO OLD
Explanation: The event writer encountered an unknown record type when skipping records of the submit/release
dataset that are too old.
System action: The record is skipped.
User response: None.
EQQW072E EVENT WRITER SEQUENCE NUMBER, EWSEQNO, MUST BE 1 TO 16
Explanation: An invalid sequence number was found in the EWSEQNO keyword of the initialization statement for an
event writer.
System action: Tivoli OPC initialization is terminated.
System programmer response: Change the sequence number to a number within the range 1 to 16 that is not
already used by an event reader task in the same address space.

Chapter 33. EQQWnnn Messages

357

EQQW073E EQQW076W

EQQW073E IT IS NOT VALID TO START AN EVENT WRITER IN EVENT READER MODE WITH THIS TYPE OF
HOST CONNECTION
Explanation: The Tivoli OPC configuration does not support starting an event writer in event reader mode. When
the event writer is started with the EWSEQNO, it tries to pass events directly to the controller. EWSEQNO can only
be used in these circumstances:
The event writer is started in the same address space as the controller.
XCF connections. The event writer is started at a tracker system connected to the controller using XCF
communication links.
SNA connections. The event writer is started at a tracker system connected to the controller using VTAM.
System action: The initialization of the event writer is terminated.
System programmer response: Remove the EWSEQNO keyword from the EWTROPTS initialization statement.
EQQW074E THE SUBMIT/RELEASE DATA SET WITH DDNAME = DDNAME IS TOO SMALL
Explanation: The submit/release dataset must be large enough to contain 100 records.
System action: The workstation analyzer processing stops. Message EQQW502E is issued.
Problem determination: None.
System programmer response: Stop Tivoli OPC, allocate a larger submit/release dataset, and restart Tivoli OPC.
EQQW075W THE HEADER RECORD IN FILE DDNAME IS INCOMPATIBLE WITH THE DEVICE TYPE
Explanation: The information in the header record does not match the calculated records per tracks value. Normally
this is caused by moving the dataset to a different device type.
Note: This message may be issued if you have reallocated the dataset using a method that does not put an end of
file at the beginning of the dataset. It can then be ignored.
System action: The dataset is reformatted.
User response: None.
EQQW076W NO CONTROLLER PULSE. EVENT WRITER WILL STOP PULSE DETECTION
Explanation: This message can be issued only when ROUTOPTS PULSE processing is active for tracker systems
on OPC Release 3 level or higher. There are two situations that can cause this message to be issued:
1. When handshake processing is in use, each connected tracker system sends an identification (ID) event to the
controller at the specified interval defined by the PULSE keyword, and the controller responds to the tracker
system. If the tracker detects that the controller has not responded to two consecutive ID events this message is
issued. This indicates that either there is a problem in the controller address space or the communication vehicle
has failed.
2. When a tracker has a blank destination, that is, when a tracker is started in a separate address space and is not
receiving work from the controller, the tracker waits for two default intervals (2 x 10 minutes) and issues this
message.
Note: When a tracker is connecting via XCF, this message may be issued without indicating a problem.
System action: The event writer task stops sending handshake events.
System programmer response: If the Tivoli OPC controller address space is active, check the message log dataset
for error messages or communication failures. If required, restart the controller. If the tracker issuing this message
has a blank destination ID, the message can be ignored.
Note: The startup of the tracker and the controller must be synchronized. However, in a DASD environment using a
submit/release dataset for the catalog management function only, the tracker must be started before the controller to
make sure that the pulsing is synchronized.

358

Tivoli OPC Messages and Codes

EQQW077E EQQW104E

EQQW077E THE SUBMIT/RELEASE DATASET IS NOT INITIALIZED
Explanation: A Tivoli OPC tracker system tried to update the submit/release dataset, ddname EQQSUDS, but the
dataset is not initialized by the controller. This message is issued only when starting with a new submit/release
dataset.
System action: The initialization of the event writer fails and the task is terminated.
User response: Stop the tracker and start the controller so as to initialize the submit/release dataset.

| EQQW078W JOB JOBNAME(JOBNUM) CANNOT BE REQUEUED. NO SYSOUT FOUND
| Explanation: The job completion checker (JCC) was not able to requeue the sysout to the OPC Data Store class.
| System action: None
| User response: Contact your system programmer
| System programmer response: Review the message log for any error messages about the subsystem interface.
| EQQW079W JBNAM WILL NOT BE SUBMITTED TO WLM FOR PROMOTION. WLM REQUEST IS TOO OLD
| Explanation: The event writer found a record for WLM job promotion in the submit/release dataset that could not be
| executed. The reason is that the request is older than the limit defined to the event writer by the SKIPTIME and
| SKIPDATE keywords in the EWTROPTS statement.
| System action: The event writer continues reading the submit/release dataset.
EQQW100E WORK STATION NAME IS NOT DEFINED OR IT IS INVALID
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The first character in a valid name must be an alphabetic character.
EQQW101E WORK STATION TYPE IS NOT DEFINED OR IT IS INVALID
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Valid workstation types are: G for general, C for computer, and P for printer workstation.
EQQW102E WORK STATION REPORTING ATTRIBUTE INVALID OR NOT DEFINED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Valid workstation reporting attributes are:
A

Automatic. Reporting is done by a user program for both start and completion of an operation, for example, a
computer workstation.

Manual start and completion. The workstation operator reports when work is started and when it is completed,
for example, a data entry workstation.

Manual completion only. The workstation operator reports only when work is completed, for example, a login
workstation.

Nonreporting. The workstation does not report on work.

EQQW103E WORK STATION SYSOUT ROUTING INVALID OR NOT DEFINED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQW104E CONTROL ON PARALLEL SERVERS INVALID OR NOT DEFINED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The valid input for control on parallel servers is: C for control, P for planning, B for both planning and control, or N for
none.

Chapter 33. EQQWnnn Messages

359

EQQW105E EQQW116E

EQQW105E JOB INTERRUPTION ATTRIBUTE INVALID OR NOT DEFINED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Valid job interruption attributes are Y for yes and N for no.
EQQW106E JOB SETUP ATTRIBUTE IS NOT DEFINED OR IT IS INVALID
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Valid job setup attributes are Y for yes and N for no.
EQQW107E DESTINATION IS NOT DEFINED OR IT IS INVALID
Explanation: Data entry error; see “Data Entry Errors” on page 2.
A destination can be specified only for a computer workstation. Enter a valid destination.

| EQQW108E VALID WORK STATION TYPES ARE OWSDTYPG, OWSDTYPC, OWSDTYPP
| Explanation: Data entry error; see “Data Entry Errors” on page 2. OWSDTYPG is the national language character
| for 'G' (general workstation), OWSDTYPC is for 'C' (computer workstation), and OWSDTYPP is for 'P' (printer
| workstation).
EQQW109E GENERAL OR PRINTER REQUIRED FOR JOB SPLITTABLE
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Only a job on a general or printer workstation can be split, not a job on a computer workstation.
EQQW110E JOB SETUP ALLOWED ONLY IF WORK STATION TYPE IS GENERAL
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Job setup is allowed if the workstation type is general, but not if the workstation type is computer or printer.
EQQW111E WORK STATION RESOURCE NAME INVALID OR NOT DEFINED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQW112E A PLANNING ATTRIBUTE IS REQUIRED, SPECIFY EITHER Y OR N
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQW113E A CONTROL ATTRIBUTE IS REQUIRED, SPECIFY EITHER Y OR N
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQW114E WORK STATION OPEN INTERVAL INVALID OR NOT DEFINED
Explanation: Data entry error; see “Data Entry Errors” on page 2.

| EQQW115E VALID ATTRIBUTES ARE OWSDATTA, OWSDATTS, OWSDATTC, OWSDATTN
| Explanation: Data entry error; see “Data Entry Errors” on page 2. OWSDATTA is the national language character
| for 'A' (automatic workstation reporting), OWSDATTS is for 'S' (manual start/stop), OWSDATTC is for 'C' (completion
| only), and OWSDATTN is for 'N' (nonreporting).
| EQQW116E COMPUTER AND AUTOMATIC MUST BE SPECIFIED IF DESTINATION DEFINED
Explanation: Data entry error; see “Data Entry Errors” on page 2.

360

Tivoli OPC Messages and Codes

EQQW117E EQQW210E

EQQW117E WORK STATION NAME IS NOT DEFINED OR IT IS INVALID
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQW118E NO DESCRIPTION IS ALLOWED WHEN STATUS IS STANDARD
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Only days that have status closed or defined can have an entry in the description field.
EQQW200E THE STANDARD DAY IS NOT DEFINED OR IS INVALID
Explanation: Data entry error; see “Data Entry Errors” on page 2.
A minimum of one open interval must be defined for the standard day. The standard day cannot be defined as
closed.
EQQW201E THE OPEN INTERVAL TABLE CONTAINS DUPLICATE ENTRIES
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQW202E DAY OR DATE IS NOT DEFINED OR IT IS INVALID
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQW203E OPEN INTERVAL FOR STANDARD DAY IS INVALID OR NOT DEFINED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQW204E INTERVALS OVERLAP IN THE OPEN INTERVAL TABLE
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQW205E OPEN INTERVAL END TIME MUST BE LATER THAN THE START TIME
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQW206E OPEN INTERVAL START OR END TIME INVALID OR NOT DEFINED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQW207E CAPACITY OF PARALLEL SERVERS INVALID OR NOT DEFINED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQW208E RESOURCE CAPACITY IS NOT DEFINED OR IT IS INVALID
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQW209E THE STANDARD DAY CANNOT BE CLOSED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQW210E ALTERNATE WORK STATION ONLY ALLOWED FOR CPU/WTO TYPE WS
Explanation: You cannot specify an alternative workstation because the current workstation is not a computer
workstation or a general workstation with the WTO attribute.
System action: The database is not updated. All changes are ignored.
User response: None.

Chapter 33. EQQWnnn Messages

361

EQQW211E EQQW300I

EQQW211E THE ALTERNATE WS MUST BE OF THE SAME TYPE
Explanation: You specified an alternative workstation that is not defined in the workstation description database as a
computer type workstation.
System action: The database is not updated. All changes are ignored.
User response: Specify the name of a computer type workstation or alter the attributes of the workstation in the
workstation description database.
EQQW212E THE ALTERNATE WS IS NOT FOUND IN THE WS DATA BASE
Explanation: The alternative workstation that you specified is not defined in the workstation description database.
System action: The database is not updated. All changes are ignored.
User response: Specify the name of an existing computer type workstation or add the workstation that you specified
to the workstation description database.
EQQW213E THE CURRENT WS CANNOT BE ALTERNATE TO ITSELF
Explanation: The alternative workstation cannot be the current workstation.
System action: The status of the workstation does not change.
User response: Change the name of the alternative workstation.
EQQW214E NODE ADDRESS CANNOT BE SET IF ACCESS METHOD NAME IS BLANK
Explanation: If the access method name is blank, the node address cannot be set. To specify a node address
value, first set the access method name.
System action: Processing continues. Tivoli OPC waits for your next input.
User response: Set the access method name and set the node address.
EQQW215E PORT NUMBER CANNOT BE SET IF NODE ADDRESS IS BLANK
Explanation: If the node address is blank, the port number cannot be set. To specify a port number value, first set
the node address.
System action: Processing continues. Tivoli OPC waits for your next input.
User response: Set the node address and set the port number.
EQQW216E ACCESS METHOD CAN BE SET ONLY IF WORKSTATION TYPE IS COMPUTER
Explanation: You specifed an access method name. Access method is supported only for computer workstations.
System action: Processing continues. Tivoli OPC waits for your next input.
User response: Specify a valid workstation type.

| EQQW217E PORT NUMBER MUST BE NUMERIC AND IN THE RANGE 0-65535
| Explanation: You specified a port number value that was not numeric or was greater than 65535. The port number
| must be a numeric value in the range 0–65535.
System action: Access-method-specific data is not saved.
User response: Specify a valid port number.
EQQW300I ALL CLOSED WORK STATIONS HAVE BEEN UPDATED
Explanation: “All workstations closed” has been updated.
System action: None.
User response: None.

362

Tivoli OPC Messages and Codes

EQQW301E EQQW400E

EQQW301E SOME DATES MAY NOT HAVE BEEN UPDATED
Explanation: Due to a failure in the subsystem, some dates may not have been updated as specified.
System action: The system waits for you to respond.
User response: Exit from the Modify All Work Stations Closed panel. On the Work Station dialog, reenter option 4,
MODIFY CLOSED to determine which dates were updated and which were not. Enter the necessary changes and
retry. If the error persists, contact your system programmer.
System programmer response: Review the Tivoli OPC message log for I/O errors that immediately precede this
message. Correct all errors and restart Tivoli OPC.
EQQW302E ALL WORK STATION CLOSED ISPF TABLE ERROR. NOTHING UPDATED
Explanation: An ISPF table contains duplicate entries.
System action: The changes are not saved.
User response: Contact your system programmer to make sure that the IBM-supplied panel is used.
System programmer response: Make sure that the IBM-supplied panel is being used.
EQQW303E ANOTHER USER IS UPDATING ALL WS CLOSED, TRY LATER
Explanation: You cannot update the all-work-station-closed database because another user is currently updating it.
System action: The system waits for you to respond.
User response: Try again later.
EQQW304E A VALID DATE MUST BE ENTERED AS CLOSE DATE
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQW306E BOTH CLOSED-FROM AND CLOSED-TO TIME MUST BE ENTERED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Both the closed-from date and the closed-to date must be specified.
EQQW307E SPECIFIED FROM-TIME LATER THAN TO-TIME
Explanation: Data entry error; see “Data Entry Errors” on page 2.
User response: Specify a to-time that is later than the from-time.
EQQW308E DUPLICATE WORK STATION CLOSED DATES EXIST IN TABLE
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQW309I ALL WORK STATION CLOSED INFO MISSING, NO ACCESS TO DATA BASE
Explanation: Information about whether or not all workstations are closed for this date could not be retrieved
because you do not have access to the all-work-station-closed database.
System action: None.
User response: None.
EQQW400E WTO OPTION ONLY ALLOWED IF WORK STATION TYPE IS GENERAL
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The write-to-operator (WTO) option is allowed if the workstation type is general, but not if the workstation type is
computer or printer.

Chapter 33. EQQWnnn Messages

363

EQQW401E EQQW500E

EQQW401E THE WTO OPTION IS MUTUALLY EXCLUSIVE WITH THE SPECIFIED OPTION
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The write-to-operator (WTO) option is not allowed if the workstation option is job setup, task or splittable.
EQQW402E STARTED TASK OPTION ONLY ALLOWED IF WORK STATION TYPE IS CPU
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Started task (STC) option is allowed if the workstation type is computer, but not if the workstation type is general or
printer.
EQQW403E THE STC OPTION IS MUTUALLY EXCLUSIVE WITH THE SPECIFIED OPTION
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Started task (STC) option is not allowed if the workstation option is job setup, write-to-operator (WTO), or splittable.
EQQW404E THIS DESTINATION REPRESENTS AN OPC/A V1R2 NEC SYSTEM
Explanation: The specified destination is defined as an OPC/A Version 1 Release 2 NEC system in the ROUTOPTS
initialization statement. Any work that should be transmitted to such a system must be handled by NJE.
System action: The workstation description is not updated.
System programmer response: If Tivoli OPC should initiate work at this destination, start a Tivoli OPC tracker.
Change the ROUTOPTS initialization statement to reflect the new system type.
EQQW405E THIS DESTINATION IS NOT KNOWN TO OPC
Explanation: The specified destination is not defined to Tivoli OPC in the ROUTOPTS initialization statement.
System action: The workstation description is not updated.
User response: Verify that the destination is correctly specified.
System programmer response: In the ROUTOPTS initialization statement, define all Tivoli OPC tracker systems
that are connected to the controller.
EQQW406E STARTED TASK OPTION INVALID OR NOT DEFINED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The option can be Y (yes) or N (no).
EQQW407E WTO OPTION INVALID OR NOT DEFINED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The option can be Y (yes) or N (no).
EQQW500E THE OPC JCL LIBRARY, DDNAME EQQJBLIB, COULD NOT BE OPENED
Explanation: Tivoli OPC could not open the JCL library (ddname EQQJBLIB) to read a member.
System action: If the failure occurred during job submission the operation extended status is set to error.
Problem determination: Review the preceding messages in the Tivoli OPC message log for a message describing
an error on the EQQJBLIB file.
User response: Contact your system programmer.
System programmer response: Check that the ddname EQQJBLIB is correctly specified and that the task started
by Tivoli OPC is authorized to open the dataset for input. When the error is corrected, stop Tivoli OPC and restart it.

364

Tivoli OPC Messages and Codes

EQQW501E EQQW507W

EQQW501E LOGICAL RECORD SIZE FOR THE OPC JCL LIBRARY, DDNAME EQQJBLIB, IS INVALID
Explanation: Tivoli OPC could not read the JCL library (ddname EQQJBLIB) because the logical record length is not
80 bytes.
System action: If the failure occurred during job submission the operation extended status is set to error.
Problem determination: Check the definition of the EQQJBLIB DD statement.
User response: Contact your system programmer.
System programmer response: Check that the ddname EQQJBLIB is correctly specified. When the error is
corrected, stop Tivoli OPC and restart it.
EQQW502E WORK STATION ANALYZER INITIALIZATION FAILED
Explanation: The workstation analyzer could not acquire all the resources required for normal operation. The most
likely reason is that the subsystem is being stopped, but the normal mode manager task has not started. It is also
possible that a submit/release dataset or the EQQJBLIB dataset could not be opened.
System action: If this message was issued while the Tivoli OPC subsystem was being stopped, subsystem
termination continues normally. Otherwise, message EQQZ045W is issued.
Problem determination: Review earlier messages in the Tivoli OPC message log to determine the exact cause of
the error.
System programmer response: Correct all errors and restart the workstation analyzer.
EQQW503I THE WORK STATION ANALYZER ENDED NORMALLY
Explanation: The Tivoli OPC subsystem is being stopped and initialization of the workstation analyzer has
completed successfully or a request has been made by an operator modify command to stop the workstation analyzer.
System action: If this message was issued while the Tivoli OPC subsystem was being stopped, subsystem
termination continues normally. Otherwise, message EQQZ045W is issued.
System programmer response: None.
EQQW505I THE WORK STATION ANALYZER TASK HAS STARTED
Explanation: The initialization of the workstation analyzer has completed and the workstation analyzer is about to
start processing.
System action: Tivoli OPC continues processing.
System programmer response: None.
EQQW506E OPC WAS UNABLE TO ALLOCATE STORAGE TO PROCESS MEMBER MEMBER OF EQQJBLIB
Explanation: The workstation analyzer was attempting to build a record in the VSAM dataset that was to be inserted
in the JCL repository dataset, but it was unable to do so because of insufficient virtual storage.
System action: The operation remains in ready status. The workstation analyzer is unable to submit the job to JES.
User response: Submit the job manually.
System programmer response: Stop Tivoli OPC and restart in a larger region.
EQQW507W OPC WAS UNABLE TO SAVE JOB MEMBER IN THE JS DATASET FOR APPL. APPL
Explanation: An error occurred when the workstation analyzer was trying to update the JCL repository dataset.
System action: The job is submitted to JES, but the JCL repository dataset would not be correctly updated.
Problem determination: Review earlier messages in the Tivoli OPC message log to determine the exact reason for
this message.
System programmer response: Correct all errors and restart the workstation analyzer.

Chapter 33. EQQWnnn Messages

365

EQQW510E EQQW514W

EQQW510E WS ANALYZER WAS UNABLE TO READ OR UPDATE CURRENT PLAN JNT RECORD FOR: JOB =
JOBNAME, APPLICATION = APPL, INPUT ARRIVAL = ARRTIME
Explanation: The workstation analyzer encountered a VSAM error when reading or updating the current plan
dataset.
System action: The workstation analyzer continues normal processing with the next ready operation.
Problem determination: Review earlier messages in the Tivoli OPC message log and the SYSLOG datasets to
determine the exact cause of this error.
System programmer response: Correct all errors and restart the workstation analyzer.
EQQW511E WS ANALYZER WAS UNABLE TO RELEASE JOB JOBNAME(JOBNUM) FROM HOLD
Explanation: The workstation analyzer was unable to communicate successfully with JES while trying to release job
JOBNAME(JOBNUM) from hold.
System action: The hold status of the current job is not changed. The workstation analyzer continues normal
processing.
Problem determination: Check that JES is executing normally.
Operator response: Check that the job is still held by JES. If it is, enter an appropriate operator command to
release the job from hold.
EQQW512E WS ANALYZER WAS UNABLE TO READ OR UPDATE CURRENT PLAN OPERATION RECORD
WITH KEY (HEXADECIMAL): F0F3OPRINDEX
Explanation: The workstation analyzer encountered a VSAM error when reading or updating the current plan
dataset.
System action: The workstation analyzer continues normal processing with the next ready operation.
Problem determination: Review earlier messages in the Tivoli OPC message log and the SYSLOG datasets to
determine the exact cause of this error.
System programmer response: Correct all errors and restart the workstation analyzer.
EQQW513E THE SUBMIT/RELEASE DATA SET WITH DDNAME = DDNAME COULD NOT BE OPENED
Explanation: The workstation analyzer could not open a submit/release dataset with the indicated ddname. The
ddname is defined as a submit/release dataset ddname in one of the computer workstations in the current plan
dataset.
System action: The workstation analyzer issues message EQQW502E and is terminated.
Problem determination: Check that the ddname is correctly specified and that the Tivoli OPC started task is
authorized to open the dataset for update.
System programmer response: Correct all errors and restart the workstation analyzer.
EQQW514W TOO MANY SUBMIT/RELEASE DATA SETS DEFINED. DDNAME = DDNAME IS IGNORED
Explanation: More than 16 ddnames for the submit/release dataset are defined in the current plan dataset.
System action: Only the first 16 submit/release ddnames found are used by the workstation analyzer.
Problem determination: Check that all computer workstations have been correctly specified.
System programmer response: Correct all errors and, if necessary, restart the workstation analyzer.

366

Tivoli OPC Messages and Codes

EQQW515W EQQW519W

EQQW515W THE SUBMIT USER EXIT MODULE, EQQUX001, COULD NOT BE LOADED
Explanation: Tivoli OPC could not locate the job submit exit load module, EQQUX001.
System action: The job submit exit is not used by the workstation analyzer.
System programmer response: If the job submit exit is meant to be used, make sure that the EQQUX001 load
module is present in a library that can be reached by Tivoli OPC. Restart the workstation analyzer.
EQQW516E THE EQQUX002 EXIT COULD NOT OPEN AN INPUT DATA SET TO READ JOB MEMBER
Explanation: The joblib I/O exit was called and gave a return code indicating that it could not open one of its input
datasets.
System action: The job is not submitted by the workstation analyzer as intended. The operation remains in ready
status.
Problem determination: Check that all DD statements needed by the EQQUX002 exit have been correctly specified
and that the Tivoli OPC started task is authorized to open the dataset for input.
User response: If necessary, submit the job manually.
System programmer response: Correct all errors and restart the workstation analyzer.
EQQW517E OPC COULD NOT ALLOCATE STORAGE TO PROCESS JOB MEMBER FOR EQQUX002 EXIT
Explanation: The workstation analyzer was building a record in the VSAM dataset to be inserted in the JCL
repository dataset, but it was unable to do so because of insufficient virtual storage.
System action: The operation remains in ready status. The workstation analyzer is unable to submit the job to JES.
User response: Submit the job manually.
System programmer response: Stop Tivoli OPC and restart it in a larger region.
EQQW518E THE EQQUX002 EXIT COULD NOT FIND JOB MEMBER IN ANY INPUT DATA SET
Explanation: The workstation analyzer was attempting to submit a job to JES for a ready operation on a computer
workstation. However, no JCL for this operation is saved in the JCL repository dataset, and the joblib I/O exit could
not find the job in any input dataset.
System action: The operation remains in ready status. Tivoli OPC assumes that some other function submits the
job to JES.
Problem determination: Check that all DD statements needed by the EQQUX002 exit have been correctly specified
and that all required members are specified.
User response: If necessary, submit the job manually.
System programmer response: Correct all errors and restart the workstation analyzer.
EQQW519W THE EQQUX002 EXIT DID NOT RETURN ANY DATA FOR JOB MEMBER
Explanation: The joblib I/O exit was called to retrieve a job to be submitted, but the exit did not return any data.
System action: The job is not submitted by the workstation analyzer as intended. The operation remains in ready
status.
Problem determination: Check that the joblib I/O exit has been correctly installed and that it works properly.
User response: If necessary, submit the job manually.
System programmer response: Correct all errors and restart the workstation analyzer.

Chapter 33. EQQWnnn Messages

367

EQQW520E EQQW524E

EQQW520E THE EQQUX002 EXIT RETURNED THE FOLLOWING I/O ERROR MESSAGE FOR JOB MEMBER:
PLUSMSG
Explanation: The joblib I/O exit was called to retrieve a job to be submitted, but the exit gave a return code
indicating that an I/O error had occurred on an input dataset.
System action: The job is not submitted by the workstation analyzer as intended. The operation remains in ready
status.
Problem determination: Check that the joblib I/O exit can access all required input datasets and that it works
properly.
User response: If necessary, submit the job manually.
System programmer response: Correct all errors and restart the workstation analyzer.
EQQW521E THE JOBLIB I/O USER EXIT MODULE, EQQUX002, COULD NOT BE LOADED
Explanation: Tivoli OPC could not locate the joblib I/O exit load module, EQQUX002.
System action: The joblib I/O exit is not used by the workstation analyzer.
User response: If necessary, submit the job manually.
System programmer response: If the joblib I/O exit is meant to be used, make sure that the EQQUX002 load
module is present in a library that can be reached by Tivoli OPC. Restart the workstation analyzer.
EQQW522E JOB MEMBER RETURNED BY THE EQQUX002 EXIT EXCEEDS MAXIMUM SUPPORTED SIZE
Explanation: The joblib I/O exit was called to retrieve a job to be submitted, but the returned job exceeds the
maximum supported size, which is 256 KB (kilobytes) of data.
System action: The job is not submitted by the workstation analyzer as intended. The operation remains in ready
status.
Problem determination: Check that the joblib I/O exit has been correctly installed and that it works correctly.
User response: If necessary, submit the job manually.
System programmer response: Correct all errors and restart the workstation analyzer.
EQQW523E JOB MEMBER IN APPLICATION APPL IS TOO LARGE TO BE SAVED ON THE JS DATA SET
Explanation: A job that is about to be submitted to JES is too large to be saved in the JCL repository dataset.
System action: The job is submitted, but the JCL repository data is not updated.
Problem determination: Use the IDCAMS LISTCAT function to determine the maximum size of records in the
dataset defined by the EQQJSxDS DD statement. Use dialog option 6.6 to determine the current JCL repository.
System programmer response: If necessary, allocate a new JCL repository dataset with a larger maximum record
size. Refer to Tivoli OPC Customization and Tuning for instructions.
EQQW524E JOB MEMBER IN APPLICATION APPL COULD NOT BE SUBMITTED BECAUSE THE EQQUX001
EXIT RETURNED AN ERROR CODE NOT ZERO
Explanation: The job submit exit was called and returned an error code that was different from '0000'.
System action: The job is not submitted and its error status is set to the error code that was returned by the submit
exit job.
User response: Check why the submit exit job, EQQUX001, stopped submission.

368

Tivoli OPC Messages and Codes

EQQW525E EQQW533E

EQQW525E JOB MEMBER IN APPLICATION APPL COULD NOT BE SUBMITTED BECAUSE OF AN ERROR IN
THE JOB CARD
Explanation: Tivoli OPC has been requested to submit a job that has an incorrect job card.
System action: The job is not submitted.
User response: Correct the JCL for this job and use the Modify Current Plan dialog to restart the occurrence at the
failing operation.
EQQW526E JOB MEMBER IN APPLICATION APPL COULD NOT BE SUBMITTED BECAUSE NO JOB CARD
COULD BE FOUND
Explanation: Tivoli OPC has been requested to submit a job that does not have a job card.
System action: The job is not submitted.
User response: Correct the JCL for this job and use the Modify Current Plan dialog to restart the occurrence at the
failing operation.
EQQW527W THE JOB CARD OF JOB MEMBER IN APPLICATION APPL SPECIFIES JOB NAME CURNAME. THE
JOB IS SUBMITTED ANYWAY
Explanation: Tivoli OPC has been requested to submit a job whose name is different from the job name of the
current operation.
System action: Tivoli OPC submits the job without any changes.
User response: If the difference in job names is intentional, the message can be ignored. If the message is not
expected, make sure that the operation corresponding to this job has the correct status.
EQQW529E JOB MEMBER IN APPLICATION APPL COULD NOT BE SUBMITTED BECAUSE THE JOB CARD
SPECIFIES JOB NAME CURNAME
Explanation: Tivoli OPC has been requested to submit a job whose name is different from that specified by the
corresponding operation. JOBCHECK(SAME) has been defined on the JTOPTS initialization statement.
System action: The job is not submitted.
User response: Change the JCL for this job to use the correct job name and use the Modify Current Plan dialog to
restart the occurrence at the failing operation.

| EQQW532E THE WSA TASK IS TERMINATING DUE TO A SEVERE ERROR. REFER TO THE SYSUDUMP DATA
|
SET FOR MORE INFORMATION
Explanation: The workstation analyzer task has encountered a severe error.
System action: The workstation analyzer task terminates and a dump of the Tivoli OPC subsystem address space is
generated.

| User response: Refer to the SYSUDUMP dataset to determine the cause of the error. If the problem is caused by
either of the exits taken by the workstation analyzer, that is, by EQQUX001 or by EQQUX002, the exit must be
updated. After correcting all errors, restart the Tivoli OPC subsystem.

| EQQW533E THE WSA TASK WILL ATTEMPT TO RECOVER FROM A SEVERE ERROR. REFER TO THE
|
SYSUDUMP DATA SET FOR MORE INFORMATION
Explanation: The workstation analyzer task has encountered a severe error.
System action: The workstation analyzer task generates a dump of the Tivoli OPC subsystem address space and
attempts to continue normal processing.

Chapter 33. EQQWnnn Messages

369

EQQW534E EQQW752W

| EQQW534E THE WSA TASK HAS DETECTED A LOOP. SNAP OF DOA, CPLREC3P, AND WAP FOLLOWS:
Explanation: The workstation analyzer task has tried to start the same operation repeatedly. The associated DOA,
CPLREC3P, and WAP are written to the message log (MLOG). The operation status is set as specified by the
SUBFAILACTION keyword of the JTOPTS statement.
System action: The failing operation is not dispatched and the workstation analyzer task continues processing.
Problem determination: Review the MLOG, job tracking (JT) log, and current plan (CP) to determine the cause of
the error.
User response: Contact your system programmer.
System programmer response: This might be a user error or an internal Tivoli OPC error. Keep copies of the
MLOG, JTARC and active JTnn, and CP. If you suspect that this is not a user error, contact your IBM representative.
EQQW539E THE EXECUTE COMMAND FAILED DUE TO INACTIVE WORKSTATION APPL: APPLID IA: IA
OPERATION: OPNO
Explanation: The workstation analyzer task has detected that there is no active workstation for the actual operation.
System action: The workstation analyzer task resets the execute indicator. The operation remain in ready status
and is scheduled as any normal operation.
User response: If an immediate execution of the operation is desired, activate the ordinary workstation or, if the
operation is reroutable, activate the alternative workstation. Reissue the EXECUTE command.
EQQW750W STC STCNAME IS DEFINED AS A SUBSYSTEM THAT IS NOT MANAGED BY JES. OPC DOES
NOT SUPPORT THIS STC
Explanation: The submittor task cannot start this STC because it is defined as a subsystem not handled by JES.
System action: The corresponding operation is set to ended-in-error with error code OSUB.
System programmer response: Check the active IEFSSNem in the SYS1.PARMLIB dataset to see if the STC
STCNAME is defined as a subsystem. If it is not defined, contact your IBM representative.
EQQW751E THE SUBMITTOR TASK GOT RC IN RETURN CODE FROM THE MGCR MACRO WHEN THE STC
STCNAME WAS ABOUT TO BE STARTED
Explanation: The submittor task cannot start this STC. The MGCR macro (SVC34) failed with the indicated return
code in register 15.
System action: The corresponding operation is set to ended-in-error with error code OSUB.
System programmer response: Contact your IBM representative.
EQQW752W A SUBMIT EVENT RECORD (TYPE I) WILL BE CREATED FOR STC STCID, BUT IT MAY BE TOO
LATE
Explanation: The submittor task has been restarted after ending abnormally. The abnormal termination occurred
immediately after the start command was performed for an STC, before the I event record could be created.
If more than five minutes has passed since the submittor task ended abnormally, the A1 event record is timed out.
Tivoli OPC tracking of the operation fails.
System action: None.
User response: Check the status of the corresponding operation. If the status is wrong, correct it manually.
System programmer response: Investigate why the submittor task ended abnormally and take appropriate action.

370

Tivoli OPC Messages and Codes

EQQW753E EQQW756E

EQQW753E STC STCID HAS BEEN STARTED BY OPC, BUT THE MVS EXIT IEFUJI WAS NEVER OR
INCORRECTLY INVOKED. THE TRACKING WILL FAIL FOR THE STC
Explanation: The submittor task started an STC, but did not receive the expected acknowledgment from the MVS
SMF exit IEFUJI. The tracking of the STC fails.
System action: None.
User response: Check the status of the corresponding operation. If the status is wrong, correct it manually.
System programmer response: Check that the active SMFPRMxx member in the SYS1.PARMLIB dataset specifies
that IEFUJI is to be invoked for STCs.
Carefully check that the IEFUJI supplied with Tivoli OPC is correctly installed.

| EQQW754E THE OPC STARTED TASK FILE, DDNAME = EQQSTC, COULD NOT BE OPENED
Explanation: The submittor task failed to open the started task temporary proclib file, EQQSTC.
System action: The submittor task does not submit started tasks, but continues to submit batch jobs and
write-to-operator (WTO) operations.
Problem determination:
Save the message log (MLOG) from the Tivoli OPC subsystem.
Save the JCL from the failing job or started task.
System programmer response: Add an EQQSTC ddname to your Tivoli OPC start procedure JCL. The ddname
must specify an empty partitioned dataset.

| EQQW755E THE OPC STARTED TASK FILE, DDNAME = EQQSTC, IS NOT A PDS
Explanation: The started task temporary proclib file, EQQSTC, was not allocated as a partitioned dataset.
System action: The submittor task does not submit started tasks, but continues to submit batch jobs and
write-to-operator (WTO) operations.
Problem determination:
Save the message log (MLOG) from the Tivoli OPC subsystem.
Save the JCL from the failing job or started task.
Run the AMASPZAP utility specifying ABSDUMP ALL on the dataset and save the output.
System programmer response: Check that the dataset allocated to the EQQSTC ddname is a partitioned dataset.

| EQQW756E THE OPC STARTED TASK FILE, DDNAME = EQQSTC, IS NOT EMPTY
Explanation: The started task temporary proclib file, EQQSTC, is not empty.
System action: The submittor task does not submit started tasks, but continues to submit batch jobs and
write-to-operator (WTO) operations.
Problem determination:
Save the message log (MLOG) from the Tivoli OPC subsystem.
Save the JCL from the failing job or started task.
Run the AMASPZAP utility specifying ABSDUMP ALL on the dataset and save the output.
System programmer response: Check that the dataset allocated to the EQQSTC ddname is an empty partitioned
dataset.

Chapter 33. EQQWnnn Messages

371

EQQW757E EQQW759E

| EQQW757E THE OPC STARTED TASK FILE, DDNAME = EQQSTC, HAS WRONG LRECL OR WRONG BLOCK
|
SIZE
Explanation: The started task temporary proclib file, EQQSTC, was allocated with either a record length not equal to
80 or an invalid block size.
System action: The submittor task does not submit started tasks, but continues to submit batch jobs and
write-to-operator (WTO) operations.
Problem determination:
Save the message log (MLOG) from the Tivoli OPC subsystem.
Save the JCL from the failing job or started task.
Run the AMASPZAP utility specifying ABSDUMP ALL on the dataset and save the output.
System programmer response: Check that the dataset allocated to the EQQSTC ddname is an empty partitioned
dataset.

| EQQW758E THE SUBMITTOR TASK DETECTED THAT THE STC STCID IS STILL IN JES3 INPUT SERVICE
|
(STARTING)
Explanation: The started task has not passed the JES3 input service phase.
This message is repeated every ten minutes.
System action: The submittor task does not submit started tasks until the STC has passed JES3 input service, but
continues to submit batch jobs and write-to-operator (WTO) operations.
Problem determination:
Save the message log (MLOG) from the Tivoli OPC subsystem.
Save the SYSLOG from the primary system console.
Produce a dynamic console dump of the Tivoli OPC address space. Make sure that CSA is part of the SDUMP
option.
System programmer response: None.

| EQQW759E THE SUBMITTOR TASK COULD NOT HANDLE STC STCNAME. THE STC SUBMISSION IS
|
STOPPED
Explanation: The started task was queued to the submittor queue, SUBQ. The STC could not be submitted
because of errors (indicated by previous messages).
System action: The submittor task does not submit started tasks, but continues to submit batch jobs and
write-to-operator (WTO) operations.
Problem determination:
Save the message log (MLOG) from the Tivoli OPC subsystem.
Produce a dynamic console dump of the Tivoli OPC address space. Make sure that CSA is part of the SDUMP
option.
User response: Manually set the corresponding operation to the correct status.

|
|
|
|

System programmer response: Investigate the MLOG and look for other messages that explain the error. After the
error has been corrected, the STC submission functionality can be reactivated by restarting either the submit task or
the Tivoli OPC subsystem after deleting any entry that might have been left in the dataset allocated to the EQQSTC
ddname.

372

Tivoli OPC Messages and Codes

EQQW760E EQQW762E

EQQW760E AN I/O ERROR OCCURRED ON THE EQQSTC DATA SET WHEN THE SUBMITTOR TASK WAS
WRITING THE JCL FOR STC STCNAME. THE SYNAD ERROR MESSAGE WAS: SYNMSG
Explanation: The submittor task encountered an I/O error writing to the started task temporary proclib file,EQQSTC.
A SYNAD error routine was given control and issued an error message.
System action: The submittor task does not submit started tasks, but continues to submit batch jobs and
write-to-operator (WTO) operations.
The corresponding operation is set to status E.
Problem determination: The SYNAD routine collects information such as jobname, stepname, unit address, device
type, ddname, operation, error description, and access method. The SYNADAF macro is used to extract this
information. For a detailed description of the layout, refer to the appropriate documentation for the MVS/DFP product
installed on this MVS/ESA system.
Save the message log (MLOG) from the Tivoli OPC subsystem.
Save the SYSLOG from the primary system console.
Run the AMASPZAP utility specifying ABSDUMP ALL on the dataset and save the output.
System programmer response: This is probably a hardware error. Contact your IBM representative.
EQQW761E AN ABEND OCCURRED WHEN THE SUBMITTOR TASK WAS WRITING THE JCL FOR STC
STCNAME ON THE EQQSTC DATA SET. THE ABEND CODE WAS: ABCODE
Explanation: The submittor task received an ABEND when writing the started task temporary proclib file, EQQSTC.
An ABEND exit routine was given control and issued an ABEND code.
System action: The submittor task does not submit started tasks, but continues to submit batch jobs and
write-to-operator (WTO) operations.
The corresponding operation is set to status E.
Problem determination:
Save the message log (MLOG) from the Tivoli OPC subsystem.
Save the SYSLOG from the primary system console.
Run the AMASPZAP utility specifying ABSDUMP ALL on the dataset and save the output.
System programmer response: See MVS Message Library: System Codes for an explanation of the ABEND code
and take the appropriate action.
EQQW762E AN I/O ERROR OCCURRED ON THE EQQSTC DATA SET WHEN THE SUBMITTOR TASK WAS
STOWING THE MEMBER FOR STC STCNAME. THE SYNAD ERROR MESSAGE WAS: SYNMSG
Explanation: The submittor task encountered an I/O error during a STOW to the started task temporary proclib file,
EQQSTC. A SYNAD error routine was given control and issued an error message.
System action: The submittor task does not submit started tasks, but continues to submit batch jobs and
write-to-operator (WTO) operations.
The corresponding operation is set to status E.
Problem determination: The SYNAD routine collects information such as jobname, stepname, unit address, device
type, ddname, operation, error description, and access method. The SYNADAF macro is used to extract this
information. For a detailed description of the layout, refer to the appropriate documentation for the MVS/DFP product
installed on this MVS/ESA system.
Save the message log (MLOG) from the Tivoli OPC subsystem.
Save the SYSLOG from the primary system console.
Run the AMASPZAP utility specifying ABSDUMP ALL on the dataset and save the output.
System programmer response: This is probably a hardware error. Contact your IBM representative.

Chapter 33. EQQWnnn Messages

373

EQQW763E EQQW765E

EQQW763E AN ABEND OCCURRED WHEN THE SUBMITTOR TASK WAS STOWING THE MEMBER FOR STC
STCNAME ON THE EQQSTC DATA SET. THE ABEND CODE WAS: ABCODE
Explanation: The submittor task received an ABEND when stowing on the started task temporary proclib file,
EQQSTC. An ABEND exit routine was given control and issued an ABEND code.
System action: The submittor task does not submit started tasks, but continues to submit batch jobs and
write-to-operator (WTO) operations.
The corresponding operation is set to status E.
Problem determination:
Save the messge log (MLOG) from the Tivoli OPC subsystem.
Save the SYSLOG from the primary system console.
Run the AMASPZAP utility specifying ABSDUMP ALL on the dataset and save the output.
System programmer response: See MVS Message Library: System Codes for an explanation of the ABEND code
and take the appropriate action.
EQQW764E THE SUBMITTOR TASK GOT AN UNEXPECTED RETURN CODE WHEN STOWING THE MEMBER
NAME FOR STC STCNAME ON THE EQQSTC DATA SET THE RETURN AND REASON CODE WAS
RC
Explanation: The submittor task received an unexpected return code when stowing a member on the started task
temporary proclib file, EQQSTC.
The return code is the content of register 15 and the reason code is the content of register 0 after the STOW macro.
The corresponding operation is set to status E.
System action: The submittor task does not submit started tasks, but continues to submit batch jobs and
write-to-operator (WTO) operations.
Problem determination:
Save the message log (MLOG) from the Tivoli OPC subsystem.
Save the SYSLOG from the primary system console.
Run the AMASPZAP utility specifying ABSDUMP ALL on the dataset, and save the output.
System programmer response: Use the return code and reason code to determine the cause of the error. For
more information, refer to the documentation about the STOW macro for the currently active MVS system.
EQQW765E THE SUBMITTOR TASK GOT AN UNEXPECTED RETURN CODE WHEN ISSUING THE MGCR
MACRO FOR STC STCNAME
Explanation: The submittor task received an unexpected return code when the MGCR macro was invoked to start
an STC.
The corresponding operation is set to status E.
System action: The submittor task does not submit started tasks, but continues to submit batch jobs and
write-to-operator (WTO) operations.
System programmer response: Use the return code and reason code to determine the cause of the error. For
more information, refer to the documentation about the MGCR macro for the currently active MVS system.

374

Tivoli OPC Messages and Codes

EQQW766W EQQW769W

EQQW766W THE EVENT CREATION ROUTINE DETECTED THAT THE JES2 EXIT7 (EQQEXIT) IS ON A LOWER
RDMID LEVEL THAN THE OPC SUBSYSTEM MODULE EQQZEV2X
Explanation: The level of the EQQEXIT macro in JES2 EXIT7 (OPCAXIT7) is at a lower maintenance level than the
Tivoli OPC subsystem.
System action: The event creation routine continues to create event records. The event records may contain invalid
tracking information, causing the corresponding operation status to be inaccurate.
Operator response: If necessary, set the correct operation status manually.
System programmer response: Reapply the EXIT7, and make sure that the appropriate maclibs are used in the
SYSLIB concatenation. If you are assembling the OPCAXIT7 outside the JES2 SMP environment, make sure that you
have the SMPMTS dataset concatenated first in the SYSLIB concatenation.
EQQW767W THE EVENT CREATION ROUTINE DETECTED THAT THE IATUX29 WAS GENERATED AGAINST A
JES3 LEVEL THAT DOES NOT MATCH THE CURRENT EXECUTING JES3 LEVEL
Explanation: The level of the JES3 macros used to generate the Tivoli OPC IATUX29 does not match the level of
the active JES3 system.
System action: The event creation routine continues to create event records. The event records may contain invalid
tracking information, causing the corresponding operation status to be inaccurate.
Operator response: If necessary, set the correct operation status manually.
System programmer response: Reapply the IATUX29 and IATUX19, and make sure that the appropriate maclibs
are used in the SYSLIB concatenation. If you are assembling the IATUX29 and IATUX19 outside the JES3
SMP-environment, make sure that you have the SMPMTS dataset top concatenated in the SYSLIB concatenation.
EQQW768W AN I/O ERROR OCCURRED ON THE EQQSTC DATA SET WHEN THE SUBMITTOR TASK WAS
READING. THE SYNAD ERROR MESSAGE WAS: SYNMSG
Explanation: The submittor task encountered an I/O error reading the started task temporary proclib file, EQQSTC.
System action: The submittor task does not submit started tasks, but continues to submit batch jobs and
write-to-operator (WTO) operations.
The corresponding operation is set to status E.
Problem determination: The SYNAD routine collects information such as jobname, stepname, unit address, device
type, ddname, operation, error description, and access method. The SYNADAF macro is used to extract this
information. For a detailed description of the layout, refer to the appropriate documentation for the MVS/DFP product
installed on this MVS/ESA system.
Save the message log (MLOG) from the Tivoli OPC subsystem.
Save the SYSLOG from the primary system console.
Run the AMASPZAP utility specifying ABSDUMP ALL on the dataset and save the output.
System programmer response: This is probably a hardware error. Contact your IBM representative.
EQQW769W AN ABEND OCCURRED WHEN THE SUBMITTOR TASK WAS READING ON THE EQQSTC DATA
SET. THE ABEND CODE WAS: ABCODE
Explanation: The submittor task received an ABEND when reading the started task temporary proclib file, EQQSTC.
System action: The submittor task does not submit started tasks, but continues to submit batch jobs and
write-to-operator (WTO) operations.
The corresponding operation is set to status E.
Problem determination:
Save the message log (MLOG) from the Tivoli OPC subsystem.
Save the SYSLOG from the primary system console.
Run the AMASPZAP utility specifying ABSDUMP ALL on the dataset, and save the output.
System programmer response: This is probably a hardware error. Contact your IBM representative.

Chapter 33. EQQWnnn Messages

375

EQQW770E EQQW776I

EQQW770E EQQSTC DDNAME IS MISSING
Explanation: The submittor task could not find the EQQSTC ddname in the JCL.
System action: The submittor task does not submit started tasks, but continues to submit batch jobs and
write-to-operator (WTO) operations.
System programmer response: Add an EQQSTC ddname to the Tivoli OPC JCL procedure and specify an empty
dataset that is allocated on the JES proclib concatenation.
For more information, refer to the Tivoli OPC Installation Guide.
EQQW771W THE JCL FOR STC JOBNAME WILL NOT BE SUBMITTED BECAUSE SUBMIT RECORD IS TOO
OLD
Explanation: The started task JCL records in a submit/release dataset are older than the limit defined by the
SKIPTIME and SKIPDATE keywords in the EWTROPTS statement.
System action: The old records are not processed. The event writer continues to read the submit/release dataset.
Operator response: If necessary, restart the corresponding operation.
EQQW772W THE WTO WITH JOBNAME JOBNAME WILL NOT BE ISSUED BECAUSE SUBMIT RECORD IS TOO
OLD
Explanation: A write-to-operator (WTO) message in a submit/release dataset is older than the limit defined by the
SKIPTIME and SKIPDATE keywords in the EWTROPTS statement.
System action: The old message is not processed. The event writer continues to read the submit/release dataset.
Operator response: If necessary, restart the corresponding operation.
EQQW775I APPLICATION: ADID OP#: OPNO WITH INPUT ARRIVAL: IA AND JOBNAME: JOBNM ON WORK
STATION: WSNAME HAS BEEN STARTED. OPERATION TEXT: OPTEXT
Explanation: A write-to-operation (WTO) operation has been started by Tivoli OPC.
This message is for information only. It can be intercepted and interpreted in a customer-defined manner.
System action: None.
User response: None.
EQQW776I APPLICATION: ADID OP#: OPNO WITH INPUT ARRIVAL: IA AND JOBNAME: JOBNM ON WORK
STATION: WSNAME HAS PASSED DEADLINE: DEADL OPERATION TEXT: OPTEXT
Explanation: An operation has passed its deadline.
This message is for information only. It can be intercepted and interpreted in a customer-defined manner, for example
to automate termination.
System action: None.
User response: None.

376

Tivoli OPC Messages and Codes

EQQW777W EQQW779I

EQQW777W THE EVENT CREATION ROUTINE DETECTED THAT THE JES2 EXIT7 (EQQEXIT) IS ON A HIGHER
RMID LEVEL THAN THE OPC SUBSYSTEM MODULE EQQZEV2X
Explanation: The EQQEXIT macro used to generate the currently active JES2 EXIT7 is on a higher maintenance
level than the subsystem module EQQZEV2X.
System action: The event creation routine continues to create event records. The event records may contain invalid
tracking information, causing the corresponding operation status to be inaccurate.
Operator response: If necessary, set the correct operation status manually.
System programmer response: The EQQZEV2X is part of the EQQSSCMD load module, which is normally loaded
during IPL. To activate a new EQQSSCMD, until a planned IPL can be performed, specify
SSCMNAME(EQQSSCMD) in the OPCOPTS initialization statement and restart the tracker address space.
EQQW778W EQQEVDS DDNAME IS NOT PRESENT OR SPECIFIES DD DUMMY
Explanation: The submittor task could not find the EQQEVDS DDNAME in the JCL for the Tivoli OPC address
space or the DDNAME specifies DD DUMMY.
System action: The submittor task does not checkpoint submit requests, but continues to submit jobs.
System programmer response: It is not mandatory to run a Tivoli OPC address space with the EQQEVDS dataset,
that is, when EWTRTASK(NO) is specified. However, to gain the submit checkpointing benefits, add this dataset.
When the dataset is used only for submit checkpointing, allocate it with the minimum size, which is two tracks.
EQQW779I NO CHECKPOINTING FOR SUBMITS ON WORKSTATION WSNAME (DQETYPE DQETYPE) WHY
Explanation: The submittor task could not checkpoint a submit request for a DQETYPE (J1=JOB, J2=STC,
WTO=WTO) defined on workstation WSNAME. The reason is defined by WHY, which can be any of the following:
1.
2.
3.
4.
5.

Access to the EQQEVDS dataset is not available
A Read from the EQQEVDS header record failed
No entries are left in the EQQEVDS header record
A delete WS from EVDS failed: WS not found
A Write to the EQQEVDS header record failed.

System action: The submittor task does not checkpoint submit requests, but continues to submit jobs.
System programmer response: For all reasons except number 3, other associated messages are present in the
message log (MLOG). Reason number 3 indicates that the maximum number of entries (13) that the checkpoint
record can hold has been reached. If this limit has been reached, verify that all 13 workstations that are defined in the
record still exist in the current plan. If the workstations are not in the current plan, the workstation name can be
blanked out or zeroed to make the position eligible for a new workstation. Alternatively, you can delete and reallocate
the EQQEVDS dataset. The entries are built only for workstations in the current plan. Refer to Tivoli OPC
Customization and Tuning for details of instructions for deleting and reallocating an EQQEVDS dataset.

Chapter 33. EQQWnnn Messages

377

378

Tivoli OPC Messages and Codes

EQQX000E EQQX011E

Chapter 34. EQQXnnn Messages
EQQX000E XROW IS NOT A VALID ROW COMMAND
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX001E ZCMD IS NOT A VALID PRIMARY COMMAND
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX002E A ROW CANNOT BE SELECTED INSIDE A BLOCK THAT IS TO BE DELETED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX003E COMMANDS AT START AND END OF REPEAT BLOCK DO NOT MATCH
Explanation: Data entry error; see “Data Entry Errors” on page 2.
Different iteration factors have been given at the start and the end of a repeat block. Either use the same factor at
both the start and the end, or set the iteration factor at either the start or the end only.
EQQX004E A DELETE BLOCK CANNOT BE ENTERED INSIDE A REPEAT BLOCK
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX005E A ROW COMMAND IS FOUND INSIDE A BLOCK THAT IS TO BE DELETED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX006E A BLOCK COMMAND HAS NO MATCHING END
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX007E ISPF DISPLAY SERVICE FOR PANEL PAN GAVE RC DISPRET
Explanation: Panel PAN could not be displayed.
System action: Processing continues.
System programmer response: Check that the panel is available in the panel library allocated to the TSO session.
If it is a user-specified JCL EDIT panel, check that the correct name is specified in the Tivoli OPC dialog, option 0.6.
EQQX008E XCMD IS NOT A VALID PRIMARY COMMAND
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX009I XSELTR
Explanation: This message is written to the ISPF log dataset when a Tivoli OPC module is loaded or when an ISPF
select is requested by the dialog. The message is used to trace Tivoli OPC activity for a dialog user.
System action: Processing continues.
User response: None.
EQQX010E SPECIFY FORMAT FOR DATE
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX011E YEAR MUST BE SPECIFIED AS YY IN THE DATE FORMAT
Explanation: Data entry error; see “Data Entry Errors” on page 2.

 Copyright IBM Corp. 1991, 1999

379

EQQX012E EQQX023E

EQQX012E Y MAY BE SET ONLY ONCE AND ONLY IN YY
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX013E MONTH MUST BE SPECIFIED AS MM IN THE DATE FORMAT
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX014E M MAY BE SET ONLY ONCE AND ONLY IN MM
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX015E DAY MUST BE SPECIFIED AS DD OR DDD IN THE DATE FORMAT
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX016E D MAY BE SET ONLY ONCE AND ONLY IN DD OR DDD
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX017E MONTH CANNOT BE SPECIFIED TOGETHER WITH JULIAN DATE
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX018E THE NAME DOES NOT CONFORM TO THE RULES FOR SUBSYSTEM NAMES
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX019E CENTURY MUST BE SPECIFIED AS TWO ADJACENT CHARACTERS
Explanation: Century is optional. If it is specified, it must be two adjacent characters.
System action: The system waits for you to respond.
User response: If century is used, specify as CC.
EQQX020E VER STATEMENT HAS INVALID SYNTAX
Explanation: An error in the panel has caused invalid syntax in the VER statement.
System action: The system waits for you to respond.
User response: Contact your system programmer.
System programmer response: Contact your IBM representative.
EQQX021E AN INVALID DELIMITER WAS FOUND
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX022E YEAR MUST BE 00 - 99, OR CENTURY WITH YEAR MUST BE 1972 - 2071
Explanation: Year must be specified as 72 to 99 for years 1972 to 1999 or 00 to 71 for years 2000 to 2071. If
century is specified, century and year must be specified as 1972 to 2071.
System action: The panel is redisplayed with this error message.
User response: Enter a value in the supported range.
EQQX023E JULIAN DAY NUMBER IS NOT COMPATIBLE WITH YEAR
Explanation: Data entry error; see “Data Entry Errors” on page 2.

380

Tivoli OPC Messages and Codes

EQQX024E EQQX038E

EQQX024E MONTH MUST BE 01 - 12
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX025E DAY IS NOT COMPATIBLE WITH MONTH AND YEAR
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX026E HOUR MUST BE 00 - 24
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX027E MINUTE MUST BE 00 - 59
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX028E MINUTE MUST BE 00 WHEN HOUR IS 24
Explanation: Data entry error; see “Data Entry Errors” on page 2.

| EQQX029E YEAR MUST BE 00 - 99, OR CENTURY WITH YEAR MUST BE 1972 - 2071
Explanation: Year must be specified as 72 to 99 for years 1972 to 1999 and 00 to 71 for years 2000 to 2071. If
century is specified, century and year must be specified as 1972 to 2071.
System action: The panel is redisplayed with this error message.
User response: Enter a value in the supported range.
EQQX031E SORT ORDER MUST BE A NUMERIC VALUE
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX032E DIRECTION MUST BE A - ASCENDING OR D - DESCENDING
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX033E SPECIFY FORMAT FOR TIME
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX034E HOURS MUST BE SPECIFIED AS HH IN TIME FORMAT
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX035E H MAY BE SET ONLY ONCE AND ONLY IN HH
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX036E MINUTES MUST BE SPECIFIED AS MM IN TIME FORMAT
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX037E M MAY BE SET ONLY ONCE AND ONLY IN MM
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX038E COLOR MUST BE ONE OF THOSE LISTED ON THE PANEL
Explanation: Data entry error; see “Data Entry Errors” on page 2.

Chapter 34. EQQXnnn Messages

381

EQQX039E EQQX049E

EQQX039E HILITE ATTRIBUTE MUST BE ONE OF THOSE LISTED ON THE PANEL
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX040I THE JOB HAS BEEN SUBMITTED FOR SUBFUNC
Explanation: The job has been submitted.
System action: Normal processing continues.
User response: None.
EQQX041E THE NAME SPECIFIED FOR THE SYSOUT DATA SET IS INVALID
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX042E AT LEAST THE FIRST JOB STATEMENT MUST BE SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX043E THE EDIT OPTION MUST BE EITHER S OR E
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX044E VALID REPLY IS Y OR N
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX045W PRESS ENTER TO GENERATE JCL OR END TO CANCEL
Explanation: Press ENTER to generate the JCL or enter END to leave the panel without generating the JCL.
System action: The system waits for you to respond.
User response: Press ENTER or enter END.
EQQX046E NEW START DATE < CURRENT END DATE
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX047E YEAR MUST BE 00 - 99, OR CENTURY WITH YEAR MUST BE 1972 - 2071
Explanation: Year must be specified as 72 to 99 for years 1972 to 1999 or 00 to 71 for years 2000 to 2071. If
century is specified, century and year must be specified as 1972 to 2071.
System action: The panel is redisplayed with this error message.
User response: Enter a value in the supported range.
EQQX048E CORRECT VALUES ARE Y AND N
Explanation: The only allowed values are Y and N.
System action: The panel is redisplayed with this error message.
User response: Enter a value of Y or N.

| EQQX049E CONFIRM PANEL MUST BE N WHEN CONSISTENCY CHECK IS N
Explanation: The Confirm Panel value is meaningful only if consistency checking has been activated. Therefore, if
Consistency Check is set to No, the Confirm Panel value must also be No.
System action: The panel is redisplayed with this error message.
User response: Set the correct value.

382

Tivoli OPC Messages and Codes

EQQX100E EQQX114E

EQQX100E ONLY ONE ROW COMMAND CAN BE SPECIFIED ON THIS PANEL
Explanation: You are not allowed to specify more than one row command on this panel.
System action: The system waits for you to respond.
User response: Enter the RESET command to remove all row commands and enter one row command.
EQQX101I PENDING APPLICATION DESCRIPTIONS DO NOT GIVE OCCURRENCES
Explanation: The Modify LTP One program, which is generated with the L command, deletes any entry of the
pending version of the application and adds any active versions of it. Also, being a Modify LTP One, dependencies
are not resolved.
System action: Processing continues.
User response: Decide whether to submit the job.
EQQX110E XOPCNM IS NOT A VALID SUBSYSTEM NAME
Explanation: Data entry error; see “Data Entry Errors” on page 2.
User response: Change the subsystem name to a valid name by using 0, OPTIONS on the Tivoli OPC main menu.
EQQX111E XOPCNM IS NOT AN ACTIVE OPC SUBSYSTEM
Explanation: The subsystem (XOPCNM) that you selected is not active.
System action: The system waits for you to respond.
User response: Change the subsystem name to a valid name by using 0, OPTIONS on the Tivoli OPC main menu.
If the name is a valid subsystem name, ask your system programmer to start the subsystem.
System programmer response: Start the subsystem.
EQQX112E NOT ENOUGH STORAGE AVAILABLE
Explanation: A GETMAIN failed at the logon to Tivoli OPC because there is not enough available storage.
System action: The system waits for you to respond.
User response: Log on again to TSO with a larger region size.
EQQX113E INCORRECT PARAMETERS TO THE LOGON ROUTINE
Explanation: The logon failed because of incorrect parameters in the input to the logon routine.
System action: The system waits for you to respond.
User response: Contact your system programmer.
System programmer response: Make sure that the correct load module library is accessed and that the dataset
contains the correct version of the Tivoli OPC modules. If the error persists, collect information in the form of the
sequence of actions leading to the error and, if possible, the data it may be dependent on. Contact your IBM
representative.
EQQX114E OPC SERVICES REQUIRE TSO/E R2
Explanation: Tivoli OPC cannot be run because the prerequisite TSO/E Release 2 system programs are not
installed.
System action: The system waits for you to respond.
User response: Contact your system programmer.
System programmer response: Make sure that TSO/E Release 2 is installed before any user attempts to use the
Tivoli OPC dialogs.

Chapter 34. EQQXnnn Messages

383

EQQX115E EQQX118E

EQQX115E TSO SERVICE FACILITY RC: XSSRC, RSNC: XSSRS, ABEND: XSSAB
Explanation: The TSO Service facility, IKJEFTSR, which is used for communication between the dialog and the
Tivoli OPC subsystem, gave an error return code. The field RC gives the IKJEFTSR return code (XSSRC). The
values and their meanings are:
8

Confirms that the requested function is terminated as a result of a user pressing ATTN (attention).

The invoked function has abended. The RSNC field contains the IKJEFTSR reason code and the ABEND
field contains the abend code.

There is a problem with the IKJEFTSR parameter list. XSSRS is the reason code for the problem.

System action: The request is rejected.
Problem determination: Use the return code, reason code, and abend code to determine the cause of the error.
For more information, refer to the documentation of IKJEFTSR for the currently active MVS system.
User response: If the return code is other than 8 (a result of you pressing ATTN), leave the dialog and retry. If the
error persists, contact your system programmer.
System programmer response: Make sure that the correct load module library is accessed and that the dataset
contains the correct version of the Tivoli OPC modules. If the error persists, collect information in the form of the
sequence of actions leading to the error and, if possible, the data it may be dependent on. Contact your IBM
representative.
EQQX116E ERROR IN SUBSYSTEM INTERFACE, RETURN CODE: XRC
Explanation: An error occurred in the subsystem interface. Return code XRC provides debugging information.
System action: The request is rejected.
User response: Contact your system programmer.
System programmer response: Make sure that the correct load module library is accessed and that the dataset
contains the correct version of the Tivoli OPC modules. If the error persists, collect information in the form of the
sequence of actions leading to the error and, if possible, the data it may be dependent on. Contact your IBM
representative.
EQQX117E ERROR IN EQQMINOR ROUTINE, RETURN CODE: XRC
Explanation: An error, with return code XRC, occurred in the EQQMINOR routine. The return code is returned from
the MVS subsystem interface routine at a subsystem call request.
System action: The request is rejected.
Problem determination: Use the return code to determine the cause of the error. For more information, refer to the
documentation of return codes from the IEFSSREQ macro for the currently active MVS system.
User response: Contact your system programmer.
System programmer response: Make sure that the correct load module library is accessed and that the dataset
contains the correct version of the Tivoli OPC modules. If the error persists, collect information in the form of the
sequence of actions leading to the error and, if possible, the data it may be dependent on. Contact your IBM
representative.
EQQX118E ERROR IN LOGON ROUTINE. RETURN CODE: XSSRC. REASON CODE XSSRS
Explanation: An error, with return code XSSRC and reason code XSSRS, occurred in the logon routine. Return
code XSSRC and reason code XSSRS provide debugging information.
System action: The request is rejected.
User response: Contact your system programmer.
System programmer response: Make sure that the correct load module library is accessed and that the dataset
contains the correct version of the Tivoli OPC modules. If the error persists, collect information in the form of the
sequence of actions leading to the error and, if possible, the data it may be dependent on. Contact your IBM
representative.

384

Tivoli OPC Messages and Codes

EQQX119E EQQX124E

EQQX119E LOGOFF REQUEST REJECTED, USER IS NOT LOGGED ON
Explanation: You have attempted to disconnect a session from Tivoli OPC, but you are not connected.
System action: None.
User response: Use the Tivoli OPC message log. to determine why you are logged off. (Tivoli OPC has been
stopped and restarted since you logged on.)
EQQX120E THE EQQMINOR PROGRAM CAN ONLY BE CALLED BY AN APF-AUTHORIZED TASK
Explanation: The EQQMINOR program could not be called by an APF-authorized task because it does not reside in
an APF-authorized library. EQQMINOR is one of a number of Tivoli OPC load modules that must reside in an
APF-authorized library.
System action: The request is rejected.
User response: Contact your system programmer.
System programmer response: Move EQQMINOR to an APF-authorized library.
EQQX121E YOU ARE NOT AUTHORIZED TO REQUEST RESOURCE
Explanation: You have attempted to access (read or update) a Tivoli OPC resource, but you are not authorized.
The retrieval and update of data in the Tivoli OPC database is controlled by parameter values in the AUTHDEF
initialization statement, the definition of the RACF resources, and the access lists to the RACF resources.
System action: The request is rejected.
User response: Contact your security administrator.
EQQX122E CURRENT SUBSYSTEM REQUEST WAS NOT RECOGNIZED
Explanation: The subsystem interface has been called with an invalid parameter.
System action: The request is rejected.
User response: Contact your system programmer.
System programmer response: Make sure that the correct load module library is accessed and that the dataset
contains the correct version of the Tivoli OPC modules. If the error persists, collect information in the form of the
sequence of actions leading to the error and, if possible, the data it may be dependent on. Contact your IBM
representative.
EQQX123E XOPCNM IS NOT AN OPC SUBSYSTEM NAME
Explanation: XOPCNM may be a subsystem name, but it is not a valid Tivoli OPC subsystem name.
System action: The system waits for you to respond.
User response: Enter a valid Tivoli OPC subsystem name.
EQQX124E YOU ARE NOT CONNECTED TO XOPCNM. RESTART FROM PRIMARY PANEL
Explanation: The subsystem XOPCNM has been restarted. You are no longer connected to it.
System action: The system waits for you to respond.
User response: Restart from the primary panel.

Chapter 34. EQQXnnn Messages

385

EQQX125E EQQX133E

EQQX125E YOU ARE ALREADY CONNECTED TO OPC
Explanation: You have attempted to reconnect your session to Tivoli OPC, but you are already connected to Tivoli
OPC.
System action: The system waits for you to respond.
User response: Log off from TSO and log on again. If the problem persists, contact your system programmer.
System programmer response: Make sure that the correct load module library is accessed and that the dataset
contains the correct version of the Tivoli OPC modules. If the error persists, collect information in the form of the
sequence of actions leading to the error and, if possible, the data it may be dependent on. Contact your IBM
representative.
EQQX127E USER NOT AUTHORIZED TO REQUEST RESOURCE, RC:XRC, RSNC:XRSN
Explanation: You have attempted to access (read or update) a Tivoli OPC resource, but you are not authorized.
The retrieval and update of data in the Tivoli OPC database is controlled by parameter values in the AUTHDEF
initialization statement, the definition of the RACF resources, and the access lists to the RACF resources.
System action: The request is rejected.
Problem determination: Use the RACROUTE return code and reason code to determine the cause of the error.
For more information, refer to the appropriate documentation for the security product installed on this MVS system.
User response: Contact your security administrator.
EQQX128E YOU ARE NOT AUTHORIZED TO REQUEST RESOURCE MEMBER
Explanation: You have attempted to access (read or update) a Tivoli OPC resource, but you are not authorized.
The retrieval and update of data in the Tivoli OPC database is controlled by parameter values in the AUTHDEF
initialization statement, the definition of the RACF resources, and the access lists to the RACF resources.
System action: The request is rejected.
User response: Contact your security administrator.
EQQX129E YOU CANNOT DELETE AN ALLOCATED SPECIAL RESOURCE
Explanation: You have attempted to delete a special resource that is allocated currently for operations. This
deletion is not allowed.
System action: The request for the delete of a special resource is rejected.
User response: Wait till the special resource is released by the operations using it.
EQQX131E NOT ENOUGH STORAGE AVAILABLE FOR OPC
Explanation: A GETMAIN for communication storage area between the dialog and the Tivoli OPC subsystem failed.
The request is for common storage area (CSA) storage, subpool 241.
System action: The request is rejected.
User response: Contact your system programmer. When more CSA storage is available, log on to TSO again.
System programmer response: Make sure that sufficient CSA storage is available.
EQQX133E THE SPECIFIED SUBSYSTEM, XOPCNM, IS ENDING
Explanation: You cannot access subsystem XOPCNM, because it is terminating.
System action: The request is rejected.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the reason for the subsystem
termination.

386

Tivoli OPC Messages and Codes

EQQX134E EQQX139E

EQQX134E REQUESTED SERVICE IS CURRENTLY NOT AVAILABLE
Explanation: Your request to use the general service function could not be granted because the general service task
is not active.
System action: The request is rejected.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine why the general service task is
not active.
EQQX135E AN ERROR OCCURRED WHILE POSTING THE SUBSYSTEM
Explanation: Your request to use the general service function could not be granted because the general service task
is inaccessible due to an error that occurred in the Tivoli OPC subsystem.
System action: The request is rejected.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log and look for messages concerning the general
service task to determine the cause of the error.
EQQX137E THE LOGICAL VSAM FILE IS NOT DEFINED
Explanation: Your request to use the general service function failed because the logical VSAM file is not defined.
This error indicates that a serious error has occurred in the Tivoli OPC subsystem.
System action: The request is rejected.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log and look for messages concerning the general
service task and the logical file handler to determine the cause of the error.
EQQX138E AN I/O REQUEST SPECIFIES TOO LARGE A VSAM KEY SIZE
Explanation: Your request to use the general service function failed because an I/O request specifies a VSAM key
size that is too large. This error indicates that a serious error has occurred in the Tivoli OPC subsystem.
System action: The request is rejected.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log and look for messages concerning the general
service task and the logical file handler to determine the cause of the error.
EQQX139E VSAM I/O REQUEST FAILED. RETURN CODE: XSSRC, REASON CODE: XSSRS
Explanation: Your request to use the general service function resulted in a VSAM I/O that failed. The reason for the
failure is indicated by return code XSSRC and reason code XSSRS, which are the VSAM return and reason codes for
a record management request.
System action: The request is rejected.
Problem determination: Use the VSAM return code and reason code to determine the cause of the error. For more
information, refer to the appropriate documentation for the MVS/DFP product installed on this MVS system.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log and look for VSAM I/O error messages to
determine the cause of the error.

Chapter 34. EQQXnnn Messages

387

EQQX140E EQQX144E

EQQX140E REMAINING STORAGE NOT ENOUGH TO OPEN LOGICAL VSAM FILE
Explanation: Your request to use the general service function failed because the remaining storage is not enough to
open a logical VSAM file.
System action: The request is rejected.
User response: Try again. If the error persists, contact your system programmer.
System programmer response: Allocate a larger region to the Tivoli OPC subsystem and restart the subsystem.
EQQX142E VSAM I/O WAS ATTEMPTED ON AN UNOPENED LOGICAL VSAM FILE
Explanation: Your request to use the general service function failed because the VSAM I/O was attempted on an
unopened logical VSAM file. This error indicates that a serious error has occurred in the Tivoli OPC subsystem.
System action: The request is rejected.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log and look for messages concerning the general
service task and the logical file handler to determine the cause of the error.
EQQX143E OPEN WAS REQUESTED FOR ALREADY OPENED LOGICAL VSAM FILE
Explanation: Your request to use the general service function failed because the open request was for an already
opened logical VSAM file. This error indicates that a serious error has occurred in the Tivoli OPC subsystem.
System action: The request is rejected.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log and look for messages concerning the general
service task and the logical file handler to determine the cause of the error.
EQQX144E ERROR IN DB RECORD AT OFFSET OFFS, REASON CODE: XSSRS
Explanation: The subsystem detected an inconsistency in a record that it was requested to write.
System action: The request is rejected.
User response: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset contains a
copy of the record and the position of the error. If you cannot find a valid reason for the error, contact your system
programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

388

Tivoli OPC Messages and Codes

EQQX145E EQQX153E

EQQX145E THE SUBSYSTEM PROGRAM IS NOT OF THE CORRECT RELEASE
Explanation: The dialog or Tivoli OPC batch program is from a later release of Tivoli OPC than the Tivoli OPC
subsystem. Tivoli OPC checks that the subsystem name specified in your dialog or in the SUBSYS parameter of the
BATCHOPTS batch initialization statement (or its default) matches the name of one of your Tivoli OPC subsystems. If
there is a match, Tivoli OPC checks if the dialog or batch program and the Tivoli OPC subsystem are from the same
release of Tivoli OPC. This message is issued only if the subsystem is from an earlier release than the dialog or
batch program.
Problem determination: This message is expected if the Tivoli OPC controller is started using the
BUILDSSX(REBUILD) keyword and the address space is not currently started.
System action: The subsystem request is rejected.
User response: Check on the main panel that you are using the correct subsystem. If the message is given by a
batch program, check that the BATCHOPTS initialization statement specifies the correct subsystem. If the error
persists, contact your system programmer.
System programmer response: Check that the correct subsystem start JCL is used and that the correct datasets
are allocated to ISPLLIB. If you cannot determine the cause of the error, and if the error persists, contact your IBM
representative.
EQQX150E PDF BROWSE/EDIT WORK FILE CONNECT FAILURE - RC = MSGRC
Explanation: The connect to the work dataset used by PDF EDIT or BROWSE failed. Return code MSGRC gives
the reason.
System action: The function is terminated.
Problem determination: Use the return code to determine the cause of the error. For more information, refer to the
appropriate documentation for the ISPF/PDF product installed on this MVS system.
User response: Contact your system programmer.
System programmer response: If the return code indicates that this is not a user error, contact your IBM
representative.
EQQX152E PDF BROWSE/EDIT WORK FILE - RC = MSGRC, REASON CODE = MSGEF
Explanation: Dynamic allocation for the PDF BROWSE/EDIT work file failed. Return code MSGRC and reason
code MSGEF give the reason.
System action: The function is terminated.
Problem determination: Use the DYNALLOC return code and reason code to determine the cause of the error. For
more information, refer to the appropriate DYNALLOC documentation for the currently active MVS system.
User response: Contact your system programmer.
System programmer response: Determine the cause of the error and take the appropriate action.
EQQX153E PDF BROWSE/EDIT WORK FILE - RC = MSGRC, REASON CODE = MSGEF
Explanation: Dynamic deallocation for PDF BROWSE/EDIT work file failed. Return code MSGRC and reason code
MSGEF give the reason.
System action: The function is terminated.
Problem determination: Use the DYNALLOC return code and reason code to determine the cause of the error. For
more information, refer to the appropriate DYNALLOC documentation for the currently active MVS system.
User response: Contact your system programmer.
System programmer response: Determine the cause of the error and take the appropriate action.

Chapter 34. EQQXnnn Messages

389

EQQX161E EQQX198E

EQQX161E AN INTERNAL OPC CONTROL BLOCK IS IN ERROR
Explanation: An internal Tivoli OPC control block is in error.
System action: The system waits for you to respond.
User response: Contact your system programmer.
System programmer response: Make sure that the correct load module library is accessed and that the dataset
contains the correct version of the Tivoli OPC modules. If the error persists, collect information in the form of the
sequence of actions leading to the error and, if possible, the data it may be dependent on. Contact your IBM
representative.
EQQX162E AN AUTHORITY CHECK FAILED, RESOURCE RESOURCE NOT RECOGNIZED
Explanation: You have attempted to access a Tivoli OPC resource, but the resource RESOURCE is unknown to
Tivoli OPC. The retrieval and update of data in the Tivoli OPC database is controlled by parameter values in the
AUTHDEF initialization statement, the definition of the RACF resources, and the access lists to the RACF resources.
System action: The request is rejected.
User response: Contact your system programmer.
System programmer response: Make sure that the correct load module library is accessed and that the dataset
contains the correct version of the Tivoli OPC modules. If the error persists, collect information in the form of the
sequence of actions leading to the error and, if possible, the data it may be dependent on. Contact your IBM
representative.
EQQX163E INCORRECT PARAMETER IN GENERAL SERVICE REQUEST
Explanation: Your request for the general service function failed because of an incorrect parameter in the request.
System action: The system waits for you to respond.
User response: Try again. If the error persists, contact your system programmer.
System programmer response: Make sure that the correct load module library is accessed and that the dataset
contains the correct version of the Tivoli OPC modules. If the error persists, collect information in the form of the
sequence of actions leading to this error and, if possible, the data it may be dependent on. Contact your IBM
representative.
EQQX164E AN ERROR OCCURRED WHILE UPDATING THE RESOURCE DATASPACE
Explanation: The request to update a special resource record failed because an error occurred when the general
service task updated the resource data space.
System action: The request is rejected.
User response: Contact your system programmer.
System programmer response: Look for message EQQQ505E in the Tivoli OPC message log, EQQMLOG. This
message contains additional information about the error. If the error persists, collect information in the form of the
sequence of actions leading to this error and, if possible, the data it may be dependent on. Contact your IBM
representative.
EQQX198E ERROR, RC: XRC, RS: XRSN, FROM SUBSYSTEM RC: XSSRC, RS: XSSRS
Explanation: A Tivoli OPC request failed with an error code that is not recognized by the message module. XRC,
XRSN, XSSRC, and XSSRS provide debugging information.
System action: The request is rejected.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

390

Tivoli OPC Messages and Codes

EQQX220E EQQX259E

EQQX220E THE INPUT ENTERED IS TOO LONG
Explanation: Data entry error; see “Data Entry Errors” on page 2.
The longest value accepted is HH.MM, where:
HH
MM

The hour in the range 00–24
The minute

| EQQX226E HOUR PART MUST BE A NUMBER FROM 0 TO 99
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX227E OPERATION DURATION MUST BE GREATER THAN 00.00
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX229E OPERATION OP DEADLINE EARLIER THAN OPERATION INPUT ARRIVAL
Explanation: The deadline must be the same as, or later than, the input arrival time.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Change the deadline or the input arrival time and resubmit the job. If the error persists, contact
your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX258E LOGICAL FILE HANDLER SUPPORT REQUIRED; TASK NOT ACTIVE
Explanation: The request has resulted in a request to the Tivoli OPC subsystem. The request cannot be handled
because the logical file handler is not available.
System action: The request is rejected.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log and look for messages concerning the logical
file handler. Correct all errors and restart the Tivoli OPC subsystem.
EQQX259E NORMAL MODE MANAGER SUPPORT REQUIRED; TASK NOT ACTIVE
Explanation: The request has resulted in a request to the Tivoli OPC subsystem. The request cannot be handled
because the normal mode manager (NMM) is not active.
System action: The request is rejected.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log and look for messages concerning the NMM.
Correct all errors and restart the Tivoli OPC subsystem.

Chapter 34. EQQXnnn Messages

391

EQQX260E EQQX265E

EQQX260E AN INTERNAL CONTROL BLOCK IS IN ERROR: REASON CODE XSSRS
Explanation: Validation checking of the data received as input to a routine has detected a damaged control block.
Reason code XSSRS provides debugging information. Reason code 102 is given when the dialog code is of an
earlier release than the Tivoli OPC subsystem code.
System action: The request is rejected.
User response: If the reason code in the message is 102, check your ISPLLIB concatenation against the release of
the subsystem that you are using. If the error persists, contact your system programmer.
System programmer response: Make sure that the correct load module library is set up to the Tivoli OPC
subsystem and to the user. Check that the library contains the correct version of the Tivoli OPC modules. If the error
persists, collect information in the form of the sequence of actions leading to this error and, if possible, the data it may
be dependent on. Contact your IBM representative.
EQQX261E NOT ENOUGH STORAGE AVAILABLE: REASON CODE XSSRS
Explanation: The general service task has failed to carry out a request due to failure to allocate enough virtual
storage. Reason code XSSRS provides debugging information.
System action: The request is rejected.
User response: If possible try to limit the storage demand of the request. For example, if this is a request for a list
of operations, choose a narrower selection criteria. If the error persists, contact your system programmer.
System programmer response: Allocate a larger region to the Tivoli OPC subsystem and restart the subsystem. If
the error persists, contact your IBM representative.
EQQX262E TIME LIMIT EXCEEDED WHEN TRANSFERRING DATA FROM OR TO THE SUBSYSTEM
Explanation: The request was terminated because the Tivoli OPC subsystem had to wait too long for data to be
transferred to or from the dialog address space. The Tivoli OPC subsystem rejected the request to be able to service
other requests.
System action: The request is rejected.
User response: Try again, and if the error persists, contact your system programmer.
System programmer response: Review the Tivoli OPC message log and look for messages concerning the general
service task and preceding the long delay. Correct all errors and restart the Tivoli OPC subsystem.
EQQX264E THE REQUEST TO CHANGE THE OPERATION FAILED, REASON CODE XSSRS
Explanation: The request to change the status of the operation was rejected by the event manager. Reason code
XSSRS provides debugging information.
System action: The request is rejected.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log and look for messages concerning the event
manager and those issued at the time of the request. Correct all errors and restart the Tivoli OPC subsystem. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX265E ATTEMPT TO READ A RECORD FAILED, REASON CODE XSSRS
Explanation: The attempt to read a record failed. Reason code XSSRS provides debugging information.
System action: The request is rejected.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log and look for I/O error messages issued at the
time of the request. Correct all errors and restart the Tivoli OPC subsystem. If the error persists, collect information
in the form of the sequence of actions leading to the error and, if possible, the data it may be dependent on. Contact
your IBM representative.

392

Tivoli OPC Messages and Codes

EQQX266E EQQX270E

EQQX266E A JOBLIB OR PROCLIB RECORD READ FAILED, REASON CODE XSSRS
Explanation: Reason code XSSRS gives the reason for the failure to read a record. The code issued depends on
the type of request.
The reason codes and their meanings are:
1

The Tivoli OPC JCL library dataset (EQQJBLIB) could not be opened. Message EQQW500E in the Tivoli OPC
message log, when issued at the time of Tivoli OPC start, further explains the reason for the failure.

The Tivoli OPC JCL library dataset (EQQJBLIB) contains records with invalid length. Message EQQW501E in the
Tivoli OPC message log, when issued at the time of Tivoli OPC start, further explains the reason for the failure.

The joblib I/O exit, EQQUX002, was not loaded. Message EQQW521E in the Tivoli OPC message log, when
issued at the time of Tivoli OPC start, further explains the reason for the failure.

The joblib I/O exit, EQQUX002, gave a return code of 241, which indicates that an I/O error has occurred in the
exit routine. Message EQQW520E in the Tivoli OPC message log further explains the reason for the I/O error.

The joblib I/O exit, EQQUX002, gave a return code of 242, which indicates that it could not open one of its input
datasets. Message EQQW516E in the Tivoli OPC message log further explains the reason for the I/O error.

The joblib I/O exit, EQQUX002, gave an invalid return code.

System action: An empty JCL member is presented.
User response: Edit the empty JCL member. Notify your system programmer about the error.
System programmer response: To determine the cause of the error, use the reason code and the corresponding
message (if any) in the Tivoli OPC message log. Correct all errors and restart the Tivoli OPC subsystem. If the error
persists, collect information in the form of the sequence of actions leading to the error and, if possible, the data it may
be dependent on. Contact your IBM representative.
EQQX267W ACCESS REJECTED, DATA SET USED BY ANOTHER OPC FUNCTION
Explanation: The record could not be read because the dataset was held for update by another Tivoli OPC function.
System action: The request is rejected.
User response: Try again later.
EQQX268W UPDATE REJECTED, DATA SET USED BY ANOTHER OPC FUNCTION
Explanation: The record update could not be carried out because the dataset was held for update by another Tivoli
OPC function.
System action: The request is rejected.
User response: Try again later.
EQQX269E THE LTP DATA SET IS BEING USED BY A BATCH FUNCTION, TRY LATER
Explanation: You cannot access the long term plan (LTP) dataset because it is being used by a batch function.
System action: The request is rejected.
User response: Try again later.
EQQX270E THE JS DATA SET IS IN USE, TRY LATER
Explanation: You have requested a function that requires access to the JCL repository file, but this file is not
available.
System action: The request is rejected.
User response: Wait a few seconds and repeat the request.

Chapter 34. EQQXnnn Messages

393

EQQX271E EQQX301E

EQQX271E A SEVERE ERROR OCCURRED IN THE GENERAL SERVICE TASK
Explanation: The request to use the general service function could not be granted because a severe error occurred
in the general service task.
System action: The request is rejected.
User response: Try again later. If the error persists, contact your system programmer.
System programmer response: To determine the cause of the error, review the Tivoli OPC message log and look
for messages concerning the general service task and those issued at the time of the request. Correct all errors and
restart the Tivoli OPC subsystem. If the error persists, collect information in the form of the sequence of actions
leading to the error and, if possible, the data it may be dependent on. Contact your IBM representative.
EQQX274E AN I/O REQUEST SPECIFIES TOO LARGE RECORD SIZE
Explanation: The request to create or modify a record resulted in the record exceeding the maximum size of the
VSAM record.
System action: The request is rejected.
User response: Contact your system programmer.
System programmer response: Check the record size against the VSAM file definition. For more information, refer
to the Tivoli OPC Installation Guide.
EQQX300E AN APPLICATION DESCRIPTION RECORD IS TOO LARGE TO BE SAVED
Explanation: The current application description (AD) record is larger than the maximum record size of the AD
database.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Check the entered data and, if the error occurred in batch, resubmit the job. The application may
have to be split into two applications. If you cannot find a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative. If the current AD
record is valid, it may become necessary to change the maximum record size of the AD file. The recommended way
of doing this is to define a new VSAM cluster similar to the current AD file, but with a larger maximum record size.
Copy the current AD file to the new AD file using IDCAMS REPRO. Change all JCL that references the old AD file so
that it references the new AD file. Restart the Tivoli OPC controller and retry the failing AD file update request.
EQQX301E THE DB RECORD VERSION VERS IS INVALID
Explanation: The version of the record is invalid.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

394

Tivoli OPC Messages and Codes

EQQX302E EQQX305E

EQQX302E THE APPLICATION ID AD IS INVALID
Explanation: The application ID that was entered contains invalid characters.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid application ID and, if the error occurred in batch, resubmit the job. If you cannot find a
valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX303E STATUS AST FOR AD AD IS INVALID
Explanation: The application status is not A or P in the indicated application description.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Check the entered data and, if the error occurred in batch, resubmit the job. If you cannot find a
valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX304E THE DB VALID-TO DATE VALTO IS INVALID
Explanation: The valid-to date is invalid.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid date and, if the error occurred in batch, resubmit the job. If you cannot find a valid
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX305E THE RUN CYCLE POINTER IS INVALID
Explanation: The pointer to the next run cycle is invalid. All run cycles must be before the first operation in the
application description record.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

Chapter 34. EQQXnnn Messages

395

EQQX306E EQQX310E

EQQX306E THE RECORD SIZE DOES NOT INCLUDE THE RUN CYCLE
Explanation: The size of the application description record does not include the run cycles.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX307E OFFSET TO NEXT RUN CYCLE IN RECORD IS INVALID
Explanation: The offset to the next run cycle in the application description record is invalid.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX308E THE OPERATION POINTER IS INVALID
Explanation: All operations must be last in the application description record.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX309E THE RECORD SIZE DOES NOT INCLUDE OPERATION DATA
Explanation: The size of the application description record does not include operation data.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX310E OFFSET TO NEXT OPERATION IN RECORD IS INVALID
Explanation: The offset to next operation in the application description record is invalid.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

396

Tivoli OPC Messages and Codes

EQQX311E EQQX314E

EQQX311E THE RECORD SIZE DOES NOT INCLUDE DEPENDENCIES AND SRS
Explanation: The application description record size does not include dependencies and special resources.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX312E THE DB VALID-FROM DATE VALFR IS INVALID
Explanation: The valid-from date entered is invalid.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid date and, if the error occurred in batch, resubmit the job. If you cannot find a valid
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX313E VALID-FROM DATE VALFR IS LATER THAN VALID-TO DATE VALTO
Explanation: The valid-to date must be later than the valid-from date.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter correct dates and, if the error occurred in batch, resubmit the job. If you cannot find a valid
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX314E AUTHORIZATION GROUP AUTHGR IS INVALID
Explanation: The authorization group field contains invalid characters.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid authorization group name and, if the error occurred in batch, resubmit the job. If you
cannot find a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

Chapter 34. EQQXnnn Messages

397

EQQX315E EQQX318E

EQQX315E OWNER ID IS MISSING IN DB NAME
Explanation: Owner ID is a required input field.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter an owner ID and, if the error occurred in batch, resubmit the job. If you cannot find a valid
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX316E LATEST UPDATE DATE LUDATE IS INVALID OR MISSING
Explanation: The date for the latest update is invalid or missing.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX317E LATEST UPDATE TIME LUTIME IS INVALID OR MISSING
Explanation: The time for the latest update is invalid or missing.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX318E APPLICATION PRIORITY PRIO IS INVALID OR MISSING
Explanation: The application priority is invalid or missing.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid application priority and, if the error occurred in batch, resubmit the job. If you cannot
find a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

398

Tivoli OPC Messages and Codes

EQQX319E EQQX323E

EQQX319E THE NUMBER OF OPERATIONS IS NOT IN THE RANGE 1 - 255
Explanation: The number of operations cannot be less than one or greater than 255.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Check the entered data and, if the error occurred in batch, resubmit the job. If you cannot find a
valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error and, if the error persists, contact your IBM representative.
EQQX320E THE NUMBER OF RUN CYCLES NRUNC IS INVALID
Explanation: The number of run cycles in the application description record is invalid.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX321E THE DB RECORD IDENTIFIER RECID IS INVALID
Explanation: The record identifier is invalid.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX322E OFFSET TO FIRST RUN CYCLE IS INVALID IN AD AD
Explanation: The offset to the first run cycle is invalid in the indicated application description record.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX323E OFFSET TO FIRST OPERATION IS INVALID IN AD AD
Explanation: The offset to the first operation is invalid in the indicated application description record.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

Chapter 34. EQQXnnn Messages

399

EQQX324E EQQX327E

EQQX324E INVALID CHARACTERS IN COMMON PART IN AD AD
Explanation: The common part of the indicated application description contains invalid characters.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX325E INVALID CALENDAR ID CALID IN AD AD
Explanation: An invalid calendar ID was entered in the indicated application description.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid calendar ID and, if the error occurred in batch, resubmit the job. If you cannot find a
valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX326E THE CALENDAR CALID DOES NOT EXIST
Explanation: The calendar ID that was entered does not exist in the calendar database.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Check the entered data and correct the error. If the error occurred in batch, resubmit the job. If
you cannot find a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX327E THE DB VALID-FROM TIME TVALFR INVALID
Explanation: The valid-from time for the indicated record is invalid.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid date and, if the error occurred in batch, resubmit the job. If you cannot find a valid
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

400

Tivoli OPC Messages and Codes

EQQX328E EQQX331E

EQQX328E THE DB VALID-TO TIME TVALTO IS INVALID
Explanation: The valid-to time for the indicated record is invalid.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid date and, if the error occurred in batch, resubmit the job.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX329E THE RUN CYCLE PERIOD RUNPER CANNOT BE FOUND
Explanation: The period that was entered could not be found in the calendar database.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Check the entered data and correct the error. If the error occurred in batch, resubmit the job. If
you cannot find a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX330E A POSITIVE RUN DAY OFFSET IS NOT BLANK OR NUMERIC 1 - 999
Explanation: The positive run day offset that was entered is not blank or a number from 1 to 999.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid offset and, if the error occurred in batch, resubmit the job. If you cannot find a valid
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX331E THE FREE DAY SPECIFICATION FDRULE IS INVALID
Explanation: The free day rule that was entered is not E, 1, 2, 3, or 4.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid free day rule and, if the error occurred in batch, resubmit the job. If you cannot find a
valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

Chapter 34. EQQXnnn Messages

401

EQQX332E EQQX335E

EQQX332E THE RUN CYCLE TYPE NEGRC IS INVALID. IT MUST BE N, X, R OR E
Explanation: The run cycle type that was entered is invalid. Valid run cycle types are:
N
X
R
E

Normal offset-based run cycles
Negative offset-based run cycles
Regular rule-based run cycles
Exception rule-based run cycles.

System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid run cycle type and, if the error occurred in batch, resubmit the job.
EQQX333E THE INPUT ARRIVAL TIME IAT IS INVALID
Explanation: The input arrival time that was entered is invalid.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid time and, if the error occurred in batch, resubmit the job. If you cannot find a valid
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX334E INVALID RELATIVE DEADLINE DAY DLINER, MUST BE NUMERIC 0 - 99
Explanation: The relative deadline day that was entered is not a number from 0 to 99.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid relative day and, if the error occurred in batch, resubmit the job. If you cannot find a
valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX335E THE DEADLINE TIME DLINET IS INVALID
Explanation: The deadline time that was entered is invalid.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid time and, if the error occurred in batch, resubmit the job. If you cannot find a valid
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

402

Tivoli OPC Messages and Codes

EQQX336E EQQX339E

EQQX336E INVALID CHARACTERS IN RUN CYCLE SECTION IN AD AD
Explanation: The run cycle section in the indicated application description contains invalid characters.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX337E THE WORK STATION DESCRIPTION WS DOES NOT EXIST
Explanation: The workstation description for the indicated workstation could not be found in the workstation
database.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Check the entered data and correct the error. If the error occurred in batch, resubmit the job. If
you cannot find a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX338E INVALID OPERATION NUMBER OP IN AD AD
Explanation: The indicated operation number is invalid in the indicated application description.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid operation number and, if the error occurred in batch, resubmit the job. If you cannot
find a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX339E THE DURATION OF OPERATION WS OP IS INVALID, DUR
Explanation: The duration time is invalid for the indicated operation.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid duration time and, if the error occurred in batch, resubmit the job. If you cannot find a
valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

Chapter 34. EQQXnnn Messages

403

EQQX340E EQQX343E

EQQX340E SMOOTHING FACTOR OF WS OP IS INVALID, SMOOTH, must be 0 - 999
Explanation: The smoothing factor is not a number between 0 and 999.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid smoothing factor and, if the error occurred in batch, resubmit the job. If you cannot
find a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX341E FEEDBACK LIMIT OF WS OP IS INVALID, FBLIM, MUST BE 100 - 999
Explanation: The feedback limit is not a number between 100 and 999.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid feedback limit and, if the error occurred in batch, resubmit the job. If you cannot find a
valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX342E ERROR TRACKING INDICATOR OF WS OP IS INVALID, AEC, MUST BE Y or N
Explanation: The error tracking indicator is not Y (yes) or N (no).
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid value and, if the error occurred in batch, resubmit the job. If you cannot find a valid
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX343E THE JOBNAME JOBNAME INVALID IN OPERATION WS OP
Explanation: The job name that was entered contains invalid characters.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid job name and, if the error occurred in batch, resubmit the job. If you cannot find a
valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

404

Tivoli OPC Messages and Codes

EQQX344E EQQX347E

EQQX344E START DAY OF WS OP IS INVALID, STRELD, MUST BE 0 - 99
Explanation: The relative input arrival day of the indicated operation is invalid.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid day and, if the error occurred in batch, resubmit the job. If you cannot find a valid
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX345E OPERATION WS OP INPUT ARRIVAL TIME IS INVALID
Explanation: The input arrival time of the indicated operation is invalid.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid time and, if the error occurred in batch, resubmit the job. If you cannot find a valid
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX346E DEADLINE DAY OF WS OP IS INVALID, DLINER, MUST BE 0 - 99
Explanation: The relative deadline day of the indicated operation is invalid.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid day and, if the error occurred in batch, resubmit the job. If you cannot find a valid
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error and, if the error persists, contact your IBM representative.
EQQX347E OPERATION WS OP DEADLINE TIME IS INVALID
Explanation: The relative deadline time of the indicated operation is invalid.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid deadline time and, if the error occurred in batch, resubmit the job. If you cannot find a
valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

Chapter 34. EQQXnnn Messages

405

EQQX348E EQQX351E

EQQX348E WS RESOURCE USAGE OF WS OP IS INVALID, RWS, MUST BE 0 - 99
Explanation: The amount of workstation resource that was entered is not a number between 0 and 99.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a number between 0 and 99 and, if the error occurred in batch, resubmit the job. If you
cannot find a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX349E NUMBER OF PS REQUIRED BY WS OP INVALID, PARSERV, MUST BE 1 - 99
Explanation: The number of parallel servers for the indicated operation is not a number between 1 and 99.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid number and, if the error occurred in batch, resubmit the job. If you cannot find a valid
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX350E NUMBER OF INTERNAL PREDECESSORS NOINPR INVALID IN WS OP
Explanation: The number of internal predecessors is invalid in the operation part of the application description
record for the indicated operation.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX351E NUMBER OF EXTERNAL PREDECESSORS NOEXPR INVALID IN WS OP
Explanation: The number of external predecessors is invalid in the operation part of the application description
record for the indicated operation.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

406

Tivoli OPC Messages and Codes

EQQX352E EQQX355E

EQQX352E NUMBER OF SPECIAL RESOURCES NOSR INVALID IN WS OP
Explanation: The number of special resources is invalid in the operation part of the application description record for
the indicated operation.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX353E INVALID CHARACTERS IN OPERATION PART IN AD AD
Explanation: The operation part of the indicated application description contains invalid characters.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Check the entered data and, if the error occurred in batch, resubmit the job. If you cannot find a
valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX354E WORK STATION PREIWS IS INVALID AS A PREDECESSOR TO WS OP
Explanation: The indicated internal predecessor workstation could not be found in the workstation description
database.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Check the entered data and correct the error. If the error occurred in batch, resubmit the job. If
you cannot find a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX355E INVALID OPERATION NUMBER IOP IN PREDECESSOR TO WS OP
Explanation: The indicated internal predecessor operation number could not be found.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid operation number and, if the error occurred in batch, resubmit the job. If you cannot
find a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

Chapter 34. EQQXnnn Messages

407

EQQX356E EQQX359E

EQQX356E INVALID TRANSPORT TIME TRTI FOR PREDECESSOR PREIWS IOP
Explanation: The transport time for the indicated internal predecessor is invalid.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid transport time and, if the error occurred in batch, resubmit the job. If you cannot find a
valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX357E INVALID CHARACTERS IN PREDECESSOR BLOCK FOR WS OP
Explanation: The predecessor part for the indicated operation contains invalid characters.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Check the entered data and, if the error occurred in batch, resubmit the job. If you cannot find a
valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX358E INVALID AD PREAD IN THE PREDECESSOR FOR WS OP
Explanation: The indicated external predecessor application description (AD) could not be found in the AD database.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Check the entered data and correct the error. If the error occurred in batch, resubmit the job. If
you cannot find a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX359E INVALID WORK STATION PREEWS IN THE PREDECESSOR FOR WS OP
Explanation: The indicated external predecessor workstation could not be found.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Check the entered data and correct the error. If the error occurred in batch, resubmit the job. If
you cannot find a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

408

Tivoli OPC Messages and Codes

EQQX360E EQQX363E

EQQX360E INVALID OPERATION NUMBER EOP IN PREDECESSOR FOR WS OP
Explanation: The indicated external predecessor operation number could not be found.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid operation number and, if the error occurred in batch, resubmit the job. If you cannot
find a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX361E INVALID LTP PRINT OPTION LTPPO IN PREDECESSOR PREEWS EOP
Explanation: The long term plan (LTP) print option in the indicated external predecessor is invalid.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid print option and, if the error occurred in batch, resubmit the job. If you cannot find a
valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX362E SPECIAL RESOURCE NAME IS BLANK IN OPERATION WS OP
Explanation: The special resource name for the indicated operation is blank.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a special resource name and, if the error occurred in batch, resubmit the job. If you cannot
find a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX363E SPECIAL RESOURCE HELD OPTION TYPE HOPT IS INVALID
Explanation: The special resource held option type is not X or S.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid held option type and, if the error occurred in batch, resubmit the job. If you cannot find
a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

Chapter 34. EQQXnnn Messages

409

EQQX364E EQQX367E

EQQX364E SPECIAL RESOURCE BLOCK CONTAINS INVALID CHARACTERS
Explanation: The special resource part in the application description contains invalid characters.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Check the entered data and, if the error occurred in batch, resubmit the job. If you cannot find a
valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX365E DUPLICATE OPERATIONS OP EXIST IN AD AD
Explanation: The indicated application description contains two or more operations with the same operation number.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter unique operation numbers for all operations and, if the error occurred in batch, resubmit the
job. If you cannot find a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX366E A PREDECESSOR TO OPERATION WS OP DOES NOT EXIST
Explanation: One predecessor for the indicated operation could not be found in the application description record.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Check the entered data and, if the error occurred in batch, resubmit the job. If you cannot find a
valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX367E THERE IS A LOOP IN THE APPLICATION NETWORK
Explanation: The application network contains a loop.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Check the entered data and, if the error occurred in batch, resubmit the job. If you cannot find a
valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

410

Tivoli OPC Messages and Codes

EQQX368E EQQX371E

EQQX368E ALL OPERATIONS NOT IN NETWORK IN AD AD
Explanation: All operations are not in the network in the indicated application description.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Check the entered data and, if the error occurred in batch, resubmit the job. If you cannot find a
valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX369E JOBNAME MISSING FOR OPERATION WS OP
Explanation: The indicated job setup, processor, or print operation has no job name.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid job name and, if the error occurred in batch, resubmit the job. If you cannot find a
valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX370E JOB SETUP OPERATION WS OP HAS NOT A PROCESSOR SUCCESSOR
Explanation: The indicated job setup operation does not have a processor successor.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Check the entered data and correct the error. If the error occurred in batch, resubmit the job. If
you cannot find a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX371E PRINT OPERATION WS OP HAS NO PREDECESSOR
Explanation: The indicated operation does not have a predecessor. A predecessor is required for print operations.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Check the entered data and correct the error. If the error occurred in batch, resubmit the job. If
you cannot find a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

Chapter 34. EQQXnnn Messages

411

EQQX372E EQQX375E

EQQX372E PRINT OPERATION WS OP HAS MORE THAN ONE PREDECESSOR
Explanation: Only one predecessor is allowed for print operations.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Check the entered data and correct the error. If the error occurred in batch, resubmit the job. If
you cannot find a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX373E PRINT OPERATION WS OP HAS NOT A PROCESSOR PREDECESSOR
Explanation: Print operations must have a processor as predecessor.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Check the entered data and correct the error. If the error occurred in batch, resubmit the job. If
you cannot find a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX374E WS OP HAS A PREDECESSOR WITH A DIFFERENT JOBNAME
Explanation: The indicated print operation has a predecessor with a different job name.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Correct the job name and, if the error occurred in batch, resubmit the job. If you cannot find a valid
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX375E THE RUN CYCLE VALIDITY END VALTO IS INVALID OR BEFORE/AT THE START
Explanation: The run cycle valid-to date that was entered either is invalid or is not later than the start date.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid date and, if the error occurred in batch, resubmit the job. If you cannot find a valid
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

412

Tivoli OPC Messages and Codes

EQQX376E EQQX379E

EQQX376E A NEGATIVE RUN DAY OFFSET IS NOT BLANK OR NUMERIC 1 - 999
Explanation: The negative run day offset that was entered is invalid.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid offset, and if the error occurred in batch, resubmit the job. If you cannot find a valid
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX377E THE APPLICATION DESCRIPTION AD DOES NOT EXIST
Explanation: The indicated application description (AD) does not exist in the AD database.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Check the entered data and correct the error. If the error occurred in batch, resubmit the job. If
you cannot find a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX378E APPLICATION DESCRIPTION AD HAS NO WS WORK STATION
Explanation: The indicated workstation does not exist in the indicated application description.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Check the entered data and correct the error. If the error occurred in batch, resubmit the job. If
you cannot find a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX379E APPLICATION DESCRIPTION AD HAS NO OPERATION OP
Explanation: The indicated operation does not exist in the indicated application description.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Check the entered data and correct the error. If the error occurred in batch, resubmit the job. If
you cannot find a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

Chapter 34. EQQXnnn Messages

413

EQQX380E EQQX383E

EQQX380E APPLICATION DESCRIPTION AD HAS NO WS OP operation
Explanation: The indicated operation does not exist in the indicated application description.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Check the entered data and correct the error. If the error occurred in batch, resubmit the job. If
you cannot find a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX381E RUN CYCLE VALID-FROM DATE VALFR IS INVALID OR MISSING
Explanation: The valid-from date for the run cycle in invalid or missing.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid date, and if the error occurred in batch, resubmit the job. If you cannot find a valid
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX382E APPLICATION ID AD IS NOT BRACKETED DBCS
Explanation: The application identification field is specified to be in DBCS format, which means that it should start
with a shift-out (X'0E') character and end with a shift-in (X'0F') character. Either shift-out or shift-in, or both, are
missing.
System action: The data is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the failing record and the position of the error.
User response: Correct the data and reenter. If the error occurred in batch, resubmit the job. If you cannot find the
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX383E OWNER ID OWNER IS NOT BRACKETED DBCS
Explanation: The owner identification field is specified to be in DBCS format, which means that it should start with a
shift-out (X'0E') character and end with a shift-in (X'0F') character. Either shift-out or shift-in, or both, are missing.
System action: The data is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the failing record and the position of the error.
User response: Correct the data and reenter. If the error occurred in batch, resubmit the job. If you cannot find the
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

414

Tivoli OPC Messages and Codes

EQQX384E EQQX387E

EQQX384E DBCS FIELD OF APPLICATION ID AD IS BLANK
Explanation: The application identification field is blank, and as it must contain at least one DBCS character, it is
invalid.
System action: The data is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the failing record and the position of the error.
User response: Correct the data and reenter. If the error occurred in batch, resubmit the job. If you cannot find the
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX385E APPL ID AD CONTAINS UNPAIRED SHIFT-OUT / SHIFT-IN CHAR
Explanation: The application identification field contains one or more superfluous shift-out or shift-in characters.
System action: The data is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the failing record and the position of the error.
User response: Correct the data and reenter. If the error occurred in batch, resubmit the job. If you cannot find the
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX386E OWNER ID OWNER CONTAINS UNPAIRED SHIFT-OUT / SHIFT-IN CHAR
Explanation: The owner identification field contains one or more superfluous shift-out or shift-in characters.
System action: The data is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the failing record and the position of the error.
User response: Correct the data and reenter. If the error occurred in batch, resubmit the job. If you cannot find the
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX387E APPLICATION ID AD CONTAINS INVALID DBCS-CHARACTER(S)
Explanation: The field indicated by the cursor contains out-of-range DBCS characters. With the exception of DBCS
blank, X'4040', each byte must be in the range X'41' – X'FE'.
System action: The data is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the failing record and the position of the error.
User response: Correct the data and reenter. If the error occurred in batch, resubmit the job. If you cannot find the
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

Chapter 34. EQQXnnn Messages

415

EQQX388E EQQX391E

EQQX388E OWNER ID OWNER CONTAINS INVALID DBCS-CHARACTER(S)
Explanation: The field indicated by the cursor contains out-of-range DBCS characters. With the exception of DBCS
blank, X'4040', each byte must be in the range X'41' – X'FE'.
System action: The data is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the failing record and the position of the error.
User response: Correct the data and reenter. If the error occurred in batch, resubmit the job. If you cannot find the
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX389E OWNER ID OWNER IS BLANK
Explanation: The owner identification field is blank and, as it must contain at least one DBCS character, it is invalid.
System action: The data is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the failing record and the position of the error.
User response: Correct the data and reenter. If the error occurred in batch, resubmit the job. If you cannot find the
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX390E THE APPLICATION ID WAS NOT SPECIFIED
Explanation: No data has been entered in the application identification field.
System action: An empty field is not accepted.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the failing record and the position of the error.
User response: Correct the data and reenter. If the error occurred in batch, resubmit the job. If you cannot find the
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX391E THE OWNER ID WAS NOT SPECIFIED
Explanation: No data has been entered in the owner identification field.
System action: An empty field is not accepted.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the failing record and the position of the error.
User response: Correct the data and reenter. If the error occurred in batch, resubmit the job. If you cannot find the
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

416

Tivoli OPC Messages and Codes

EQQX392E EQQX395E

EQQX392E THE APPLICATION ID AD CONTAINS AN ODD NUMBER OF BYTES
Explanation: The application identification field is specified as a DBCS field and requires two bytes per character.
Hence, 2, 4, 6, ..., bytes per character must be entered.
System action: The data is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the failing record and the position of the error.
User response: Correct the data and reenter. If the error occurred in batch, resubmit the job. If you cannot find the
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX393E THE OWNER ID OWNER CONTAINS AN ODD NUMBER OF BYTES
Explanation: The owner identification field is specified as a DBCS field and requires two bytes per character.
Hence, 2, 4, 6, ..., bytes per character must be entered.
System action: The data is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the failing record and the position of the error.
User response: Correct the data and reenter. If the error occurred in batch, resubmit the job. If you cannot find the
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX394E ALL SPECIAL RESOURCES IN AN OPERATION MUST BE UNIQUE
Explanation: A special resource must have a unique name in an operation.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Check for misspellings or delete the duplicate entry. If the error occurred in batch, resubmit the job.
If you cannot find a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX395E ALL INTERNAL PREDECESSORS IN AN OPERATION MUST BE UNIQUE
Explanation: A duplicate internal predecessor was found in an operation.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Delete the duplicate internal predecessor and, if the error occurred in batch, resubmit the job. If you
cannot find a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

Chapter 34. EQQXnnn Messages

417

EQQX396E EQQX399E

EQQX396E ALL EXTERNAL PREDECESSORS IN AN OPERATION MUST BE UNIQUE
Explanation: A duplicate external predecessor was found in an operation.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Delete the duplicate external predecessor and, if the error occurred in batch, resubmit the job. If
you cannot find a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX397E OWNER ID OWNER CONTAINS LOWER CASE CHARACTERS
Explanation: The owner ID cannot contain lowercase characters.
System action: The data is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the failing record and the position of the error.
User response: Correct the data and reenter. If the error occurred in batch, resubmit the job. If you cannot find the
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX398E DUPLICATE POSITIVE RUN DAY OFFSETS WERE FOUND IN A RUN CYCLE
Explanation: All positive run day offsets must be unique in a run cycle.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Delete the duplicates and, if the error occurred in batch, resubmit the job. If you cannot find a valid
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX399E DUPLICATE NEGATIVE RUN DAY OFFSETS WERE FOUND IN A RUN CYCLE
Explanation: All negative run day offsets must be unique in a run cycle.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Delete the duplicate run days and, if the error occurred in batch, resubmit the job. If you cannot find
a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

418

Tivoli OPC Messages and Codes

EQQX400E EQQX403E

EQQX400E THE CALENDAR DATA BASE RECORD SIZE IS INVALID
Explanation: The calendar description record cannot be greater than 32768 bytes (32KB) or less than the size of the
common part of the calendar.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: If the size is too large, the calendar may have to be split into two calendars. If you cannot find a
valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX401E THE CALENDAR ID CALID IS INVALID
Explanation: The calendar ID in the calendar description record either contains invalid characters or does not start
with a capital letter or national language characters.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Correct the calendar ID and retry. If you cannot find a valid reason for the error, contact your
system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX402E WORK DAY END TIME IS INVALID OR MISSING
Explanation: Work day end time must be a value in the range '0000' to '2400', where the first two characters
represent the hour and the last two characters represent the minutes.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Correct the time and retry. If you cannot find a valid reason for the error, contact your system
programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX403E NUMBER OF WEEKDAYS / SPECIFIC DATES IS INVALID
Explanation: The number of weekday/specific dates has an invalid value in the calendar description record.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Investigate the record and correct the error. If you cannot find a valid reason for the error, contact
your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

Chapter 34. EQQXnnn Messages

419

EQQX404E EQQX407E

EQQX404E INVALID CHARACTERS IN COMMON SECTION OF CALENDAR
Explanation: An invalid character was found in a reserved field in the common section of the calendar description
record.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Investigate the record and correct the error. If you cannot find a valid reason for the error, contact
your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX405E THE RECORD SIZE DOES NOT INCLUDE WEEK DAYS/SPECIFIC DATES
Explanation: The total record size of the calendar description record is too short to contain the common section and
all week days/specific dates.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Investigate the record and correct the error. If you cannot find a valid reason for the error, contact
your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX406E A WEEK DAY IN CALENDAR IS INVALID
Explanation: For a week day, the second character in the variable section is blank. The first character has a value
of 1 to 7, which corresponds with Monday to Sunday.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Correct the day and retry. If you cannot find a valid reason for the error, contact your system
programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX407E WEEK DAYS IN CALENDAR ARE NOT IN ASCENDING ORDER
Explanation: The week days are not correctly sorted.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Correct the sequence and retry. If you cannot find a valid reason for the error, contact your system
programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

420

Tivoli OPC Messages and Codes

EQQX408E EQQX411E

EQQX408E STATUS OF WEEK DAY / SPECIFIC DATE IS NOT WORK NOR FREE
Explanation: The status of weekday/specific date in the calendar description record must be W (work) or F (free).
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Correct the error and retry. If you cannot find a valid reason for the error, contact your system
programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX409E A SPECIFIC DATE IN CALENDAR IS INVALID
Explanation: A specific date must have the format YYMMDD where YY is the last two characters in the year, MM is
the month number, and DD is the day in the month.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Correct the date and retry. If you cannot find a valid reason for the error, contact your system
programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX410E SPECIFIC DATES IN CALENDAR ARE NOT IN ASCENDING ORDER
Explanation: Specific dates are not correctly sorted.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Correct the sequence and retry. If you cannot find a valid reason for the error, contact your system
programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX411E VARIABLE SECTION OF CALENDAR CONTAINS INVALID CHARACTERS
Explanation: An invalid character was found in a reserved field in the variable section of the calendar description
record.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Investigate the record and correct the error. If you cannot find a valid reason for the error, contact
your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

Chapter 34. EQQXnnn Messages

421

EQQX412E EQQX415E

EQQX412E CANCEL IF LATE IS ONLY ALLOWED FOR TIME JOBS
Explanation: Cancel if late can only be specified for time-dependent jobs.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Specify cancel = no or make the operation time dependent. If the error occurred in batch, resubmit
the job. If you cannot find a valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX413E RELATIVE START DAY IS MISSING FOR WS OP
Explanation: If the operation is time dependent, an operation input relative start day must be specified.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a relative start day and, if the error occurred in batch, resubmit the job. If you cannot find a
valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX414E START TIME IS MISSING FOR WS OP
Explanation: If the operation is time dependent, an operation input start time must be specified.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a start time and, if the error occurred in batch, resubmit the job. If you cannot find a valid
reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX415E JOBNAME IS MISSING IN OPERATION WS OP
Explanation: Job name must be specified for the computer, printer, and job setup operations.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid job name and, if the error occurred in batch, resubmit the job. If you cannot find a
valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

422

Tivoli OPC Messages and Codes

EQQX416E EQQX421E

EQQX416E JOB SETUP OPERATION WS OP HAS NO SUCCESSOR WITH SAME JOBNAME
Explanation: The indicated job setup operation has no successor with the same job name.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Check and correct the job names for the computer operations succeeding the indicated operation. If
the error occurred in batch, resubmit the job. If you cannot find a valid reason for the error, contact your system
programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX417E THE VARIABLE TABLE NAME CONTAINS AN INVALID CHARACTER
Explanation: Data entry error; see “Data Entry Errors” on page 2.
EQQX418E THE VARIABLE TABLE IS NOT DEFINED TO OPC
Explanation: Data entry error; see “Data Entry Errors” on page 2.
You have tried to define a variable table ID that does not exist in Tivoli OPC's database.
EQQX419E NUMBER OF PARALLEL SERVERS MUST BE 1 FOR OPERATION WS OP
Explanation: The specified operation runs on a computer workstation and can use only one parallel server.
System action: The application description is not updated. The current application description record is printed on
the dump dataset (ddname EQQDUMP).
User response: Change the number of parallel servers to one and, if the error occurred in batch, resubmit the batch
job.
EQQX420E REQUEST TYPE REQ IS NOT SUPPORTED
Explanation: An internal parameter list, consisting of a sequence of control blocks, is validated and found to have an
invalid request type.
System action: If this is a request to the program interface function, the request is rejected and control is returned
with the return code set to error.
Problem determination: The dump dataset (ddname EQQDUMP) contains a dump of the control blocks.
User response: This is likely to be an internal error. If the error occurs in a program using the program interface
function, do the requests in a different order and rerun.
System programmer response: If you cannot find a valid reason for the error, make the dump dataset and the
message log available and contact your IBM representative.
EQQX421E THE SPECIFIED CONTROL BLOCK LENGTH LEN IS INVALID
Explanation: An internal parameter list, consisting of a sequence of control blocks, is validated and found to have an
invalid length.
System action: If this is a request to the program interface function, the request is rejected and control is returned
with the return code set to error.
Problem determination: The dump dataset (ddname EQQDUMP) contains a dump of the control blocks.
User response: This is likely to be an internal error. If the error occurs in a program using the program interface
function, do the requests in a different order and rerun.
System programmer response: If you cannot find a valid reason for the error, make the dump dataset and the
message log available and contact your IBM representative.

Chapter 34. EQQXnnn Messages

423

EQQX422E EQQX426E

EQQX422E THE INPUT ARRIVAL DATE IS REQUIRED BUT NOT AVAILABLE
Explanation: The input arrival date is a required parameter in the request. No input arrival date is specified.
System action: If this is a request to the program interface function, the request is rejected and control is returned
with the return code set to error.
Problem determination: The dump dataset (ddname EQQDUMP) contains a dump of the control blocks validated
when the error was detected.
User response: Specify input arrival date as an argument in the program interface request.
EQQX423E INPUT ARRIVAL DATE IAD IS INVALID
Explanation: The input arrival date is not a valid internal Tivoli OPC date, in the format YYMMDD.
System action: If this is a request to the program interface function, the request is rejected and control is returned
with the return code set to error.
Problem determination: The dump dataset (ddname EQQDUMP) contains a dump of the control blocks validated
when the error was detected.
User response: Correct the invalid date and rerun.
EQQX424E THE INPUT ARRIVAL TIME IS REQUIRED BUT NOT AVAILABLE
Explanation: The input arrival time is a required parameter in the request. No input arrival time is specified.
System action: If this is a request to the program interface function, the request is rejected and control is returned
with the return code set to error.
Problem determination: The dump dataset (ddname EQQDUMP) contains a dump of the control blocks validated
when the error was detected.
User response: Specify input arrival time as an argument in the program interface request.
EQQX425E THE REQUEST CONTAINS INCONSISTENT APPLICATION IDS, AD and RAD
Explanation: In the program interface request an application description is given by the data area parameter. The
ID of an application is also given by the arguments parameters. The data area application description ID differs from
the ID given by the arguments.
System action: If this is a request to the program interface function, the request is rejected and control is returned
with the return code set to error.
Problem determination: The dump dataset (ddname EQQDUMP) contains a dump of the control blocks validated
when the error was detected.
User response: Either set the data area pointer to zero or remove the application ID from the arguments parameter
of the program interface request.
EQQX426E EITHER BOTH DEADLINE DATE AND TIME MUST BE GIVEN OR NEITHER DATE NOR TIME
Explanation: If the deadline date is specified, the deadline time must also be specified, and vice versa.
System action: If this is a request to the program interface function, the request is rejected and control is returned
with the return code set to error.
Problem determination: The dump dataset (ddname EQQDUMP) contains a dump of the control blocks validated
when the error was detected.
User response: Specify both deadline date and deadline time or remove both from the arguments parameter of the
program interface request.

424

Tivoli OPC Messages and Codes

EQQX427E EQQX431E

EQQX427E THE DEADLINE DATE DLD IS INVALID
Explanation: The deadline date is not a valid internal Tivoli OPC date, in the format YYMMDD.
System action: If this is a request to the program interface function, the request is rejected and control is returned
with the return code set to error.
Problem determination: The dump dataset (ddname EQQDUMP) contains a dump of the control blocks validated
when the error was detected.
User response: Correct the invalid date and rerun.
EQQX428E THE PREDECESSOR INPUT ARRIVAL DATE IS REQUIRED BUT NOT AVAILABLE
Explanation: The predecessor input arrival date is a required parameter in the request. It is not specified.
System action: If this is a request to the program interface function, the request is rejected and control is returned
with the return code set to error.
Problem determination: The dump dataset (ddname EQQDUMP) contains a dump of the control blocks validated
when the error was detected.
User response: Specify predecessor input arrival date as an argument in the program interface request.
EQQX429E THE PREDECESSOR INPUT ARRIVAL TIME IS REQUIRED BUT NOT AVAILABLE
Explanation: The predecessor input arrival time is a required parameter in the request. It is not specified.
System action: If this is a request to the program interface function, the request is rejected and control is returned
with the return code set to error.
Problem determination: The dump dataset (ddname EQQDUMP) contains a dump of the control blocks validated
when the error was detected.
User response: Specify predecessor input arrival time as an argument in the program interface request.
EQQX430E THE PREDECESSOR APPLICATION ID IS REQUIRED BUT NOT AVAILABLE
Explanation: The predecessor application ID is a required parameter in the request. It is not specified.
System action: If this is a request to the program interface function, the request is rejected and control is returned
with the return code set to error.
Problem determination: The dump dataset (ddname EQQDUMP) contains a dump of the control blocks validated
when the error was detected.
User response: Specify the predecessor application ID as an argument in the program interface request.
EQQX431E AST IS NOT A VALID STATUS CODE
Explanation: Status AST is not a valid status code. The supported codes are V, T, S, and C.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Enter a valid status code and resubmit the job. If you cannot find a valid reason for the error,
contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.

Chapter 34. EQQXnnn Messages

425

EQQX432E EQQX436E

EQQX432E AEC IS NOT A VALID CODE FOR ADDING FUNCTION
Explanation: Code AEC specifies an updating function that is not supported.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Check the entered data and, if the error occurred in batch, resubmit the job. If you cannot find a
valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If the
error persists, contact your IBM representative.
EQQX433E A MAXIMUM OF 100 EXTERNAL PREDECESSORS ARE ALLOWED
Explanation: No more than 100 external predecessors can be specified in an application.
System action: The request to write the record is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Check the entered data and, if the error occurred in batch, resubmit the job. If you cannot find a
valid reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQX434E IAD IAT AD CANNOT HAVE A DEPENDENCY ON ITSELF
Explanation: An occurrence cannot be dependent on itself.
System action: A dump of the record is written to the dump dataset (EQQDUMP).
User response: Check your dependency specifications.
EQQX435E ROW COMMAND IS NOT VALID FOR A PENDING APPLICATION
Explanation: Calculate and Print run days (A) row command is valid only for application versions that are active.
System action: The request is rejected.
User response: Use these row commands against only active applications.
EQQX436E NO RUNCYCLE OFFSETS HAVE BEEN DEFINED FOR RUNCYCLE PERIOD = RUNPER
Explanation: An attempt was made to save an invalid application description record. The record being saved
contained a run cycle that did not have any run cycle offsets. This is not valid since each run cycle must contain at
least one run cycle offset.
System action: If this message is issued in a Tivoli OPC dialog, the dialog waits for you to correct the error. If the
message is issued in a Tivoli OPC batch program, additional messages may be issued and the batch program may
terminate. The invalid application description record is not saved.
Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current
application description is printed in the dump dataset and the position of the invalid value in the record is given.
User response: Enter at least one run cycle offset value.

426

Tivoli OPC Messages and Codes

EQQX437E EQQX442E

EQQX437E NEGATIVE RUNDAY SPECIFICATION CONTAINS ERRORS
Explanation: The runday fields in the current application description contain embedded blanks and the application
description cannot be saved.
System action: The dialog waits for you to correct the error.
Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current
application description is printed in the dump dataset and the position of the invalid runday in the record is given.
User response: Enter a valid runday value.
EQQX438E THE RESOURCE QUANTITY IS NOT IN THE RANGE 1 - 999,999
Explanation: The quantity specified for a resource is not within the valid range.
System action: The request to write the record is rejected.
Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current
application description is printed in the dump dataset and the position of the invalid resource in the record is given.
User response: Enter a valid resource quantity. If the error occurred in batch, resubmit the job. If you cannot find a
valid reason for the error, contact your system programmer.
EQQX439E THE ON ERROR FIELD FOR A RESOURCE CONTAINS AN INVALID VALUE
Explanation: The value of the On error field for a resource is invalid.
System action: The request to write the record is rejected.
Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current
application description is printed in the dump dataset and the position of the invalid resource in the record is given.
User response: Enter a valid On error value. If the error occurred in batch, resubmit the job. If you cannot find a
valid reason for the error, contact your system programmer.
EQQX440E THE ETT DATA BASE RECORD SIZE IS INVALID
Explanation: The size of the record in the event-triggered tracking (ETT) database is not acceptable by the system.
System action: The request to write the record is rejected.
Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current record
in the ETT database is printed in the dump dataset and the position of the invalid field in the record is given.
User response: Contact your system programmer.
EQQX441E THE NAME OF THE ETT TRIGGER IS BLANK
Explanation: The error is detected when you try to validate the record before writing it to the database.
System action: The request to write the record is rejected.
Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current record
is printed in the dump dataset and the position of the invalid field in the record is given.
User response: If you cannot find a valid reason for the error, contact your system programmer.
EQQX442E RESERVED FIELDS IN ETT RECORD MUST BE NULLS
Explanation: The error is detected when you try to validate the record before writing it to the database.
System action: The request to write the record is rejected.
Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current record
is printed in the dump dataset and the position of the invalid field in the record is given.
User response: If you cannot find a valid reason for the error, contact your system programmer.

Chapter 34. EQQXnnn Messages

427

EQQX443E EQQX448E

EQQX443E THE ALL WORK STATION CLOSED DATA BASE RECORD SIZE IS INVALID
Explanation: The error is detected when you try to validate the record before writing it to the database.
System action: The request to write the record is rejected.
Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current record
is printed in the dump dataset and the position of the invalid field in the record is given.
User response: If you cannot find a valid reason for the error, contact your system programmer.
EQQX444E RESERVED FIELDS IN ALL WORK STATION CLOSED RECORD MUST BE BLANK
Explanation: The error is detected when you try to validate the record before writing it to the database.
System action: The request to write the record is rejected.
Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current record
is printed in the dump dataset and the position of the invalid field in the record is given.
User response: If you cannot find a valid reason for the error, contact your system programmer.
EQQX445E THE PERIOD DATA BASE RECORD SIZE IS INVALID
Explanation: The error is detected when you try to validate the record before writing it to the database.
System action: The request to write the record is rejected.
Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current record
is printed in the dump dataset and the position of the invalid field in the record is given.
User response: If you cannot find a valid reason for the error, contact your system programmer.
EQQX446E THE PERIOD INTERVAL START OR END DATE IS INVALID
Explanation: The error is detected when you try to validate the record before writing it to the database.
System action: The request to write the record is rejected.
Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current record
is printed in the dump dataset and the position of the invalid field in the record is given.
User response: If the error occurred in batch, correct the record and resubmit the job. If you cannot find a valid
reason for the error, contact your system programmer.
EQQX447E RESERVED FIELDS IN PERIOD RECORD MUST BE BLANK
Explanation: The error is detected when you try to validate the record before writing it to the database.
System action: The request to write the record is rejected.
Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current record
is printed in the dump dataset and the position of the invalid field in the record is given.
User response: If you cannot find a valid reason for the error, contact your system programmer.

| EQQX448E PERIOD TYPE MUST BE &CYCA., &CYCW. OR &CYCN.
| Explanation: Data entry error; see “Data Entry Errors” on page 2.
| CYCA is the national language character for 'A' (?), CYCW is for 'W' (?), and CYCN is for 'N' (?).

428

Tivoli OPC Messages and Codes

EQQX450E EQQX457E

EQQX450E THE WORK STATION DATA BASE RECORD SIZE IS INVALID
Explanation: The error is detected when you try to validate the record before writing it to the database.
System action: The request to write the record is rejected.
Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current record
is printed in the dump dataset and the position of the invalid field in the record is given.
User response: If you cannot find a valid reason for the error, contact your system programmer.
EQQX451E RESERVED FIELDS IN WORK STATION RECORD MUST BE BLANKS
Explanation: The error is detected when you try to validate the record before writing it to the database.
System action: The request to write the record is rejected.
Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current record
is printed in the dump dataset and the position of the invalid field in the record is given.
User response: If you cannot find a valid reason for the error, contact your system programmer.
EQQX453E AN INVALID WEEK DAY NAME WAS SPECIFIED
Explanation: The error is detected when validating the record before writing it to the database.
System action: The request to write the record is rejected.
Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current record
is printed in the dump dataset and the position of the invalid field in the record is given.
User response: If the error occurred in batch, correct the record and resubmit the job. If you cannot find a valid
reason for the error, contact your system programmer.
EQQX454E WEEK DAY/SPECIFIC DATES NOT ENTERED IN ASCENDING ORDER
Explanation: The error is detected when validating the record before writing it to the database.
System action: The request to write the record is rejected.
Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current record
is printed in the dump dataset and the position of the invalid field in the record is given.
User response: If the error occurred in batch, correct the record and resubmit the job. If you cannot find a valid
reason for the error, contact your system programmer.
EQQX455E AN INVALID SPECIFIC DATE WAS SPECIFIED
Explanation: Data entry error; see “Data Entry Errors” on page 2.

| EQQX456E INVALID DATES HAVE BEEN SPECIFIED FOR RUN DAYS GENERATION
| Explanation: For the specified rule, the application valid from date is greater than the application valid to date.
| User response: On the Application Description dialogs, check the valid from date and on the Run Days dialog,
| check the specified rules.
| EQQX457E NO RUN DAYS HAVE BEEN GENERATED FOR THIS RULE
| Explanation: The Gendays command has not generated run days for the specified rule.
| System programmer response: Activate the General Service diagnose flag and look at the return code from the
| Spawner in EQQGSGNS.

Chapter 34. EQQXnnn Messages

429

EQQX462E EQQX467E

EQQX462E FIELD HIPERBATCH IS INVALID, MUST BE Y OR N
System action: The request to write the record is rejected.
Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current
resource description is printed in the dump dataset and the position of the invalid resource specification in the record
is given.
User response: Enter a valid Hiperbatch value. If the error occurred in batch, resubmit the job. If you cannot find a
valid reason for the error, contact your system programmer.
EQQX463E FIELD USED FOR IS INVALID, MUST BE N,P,C OR B
System action: The request to write the record is rejected.
Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current
resource description is printed in the dump dataset and the position of the invalid resource specification in the record
is given.
User response: Enter a valid Used For value. If the error occurred in batch, resubmit the job. If you cannot find a
valid reason for the error, contact your system programmer.

| EQQX464E DAY OF WEEK MUST BE ZERO OR DATE MUST BE BLANK IN FIRST INTERVAL
System action: The request to write the record is rejected.

Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current
resource description is printed in the dump dataset and the position of the invalid resource specification in the record
is given. The first interval contains default values, that is, Day of Week must be zero or Date must be blank.
User response: If you cannot find a valid reason for the error, contact your IBM representative.

| EQQX465E DEFAULT QUANTITY INVALID, MUST BE IN INTERVAL 1 TO 999999.
System action: The request to write the record is rejected.
Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current
resource description is printed in the dump dataset and the position of the invalid resource specification in the record
is given.

| User response: Set Default Quantity in the common segment of the resource record to an integer value as given in
| the message. If the error occurred in batch, resubmit the job. If you cannot find a valid reason for the error, contact
your system programmer.
EQQX466E DAY OF WEEK IS ZERO AND DATE IS BLANK IN INTERVAL OTHER THAN FIRST
System action: The request to write the record is rejected.
Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current
resource description is printed in the dump dataset and the position of the invalid resource specification in the record
is given.
User response: The Day of week or Date must be specified in all but the first interval of a resource description. Set
either Day of week to the value for a week day (1–7) or the value for the Standard day (8). In that case the Date field
should be reset. Or, set the Day of week to 0 and the Date to a specific date in the form YYMMDD. If the error
occurred in batch, resubmit the job. If you cannot find a valid reason for the error, contact your system programmer.
EQQX467E DEFAULT AVAILABILITY IS INVALID, MUST BE Y OR N
Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current
resource description is printed in the dump dataset and the position of the invalid resource specification in the record
is given.
User response: Enter a valid Default Avail value. If the error occurred in batch, resubmit the job. If you cannot find
a valid reason for the error, contact your system programmer.

430

Tivoli OPC Messages and Codes

EQQX468E EQQX474E

EQQX468E FIELD AVAIL IS INVALID IN INTERVAL IVLID. IT MUST BE Y, N OR BLANK
Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current
resource description is printed in the dump dataset and the position of the invalid resource specification in the record
is given. IVLID identifies the interval by the week day number (1–7), the standard day number (8) or a date, followed
by the interval start time.
User response: Enter a valid Avail value. If the error occurred in batch, resubmit the job. If you cannot find a valid
reason for the error, contact your system programmer.
EQQX470E FIELD WEEK DAY IS INVALID IN INTERVAL IVLID, MUST BE IN RANGE 0-8
Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current
resource description is printed in the dump dataset and the position of the invalid resource specification in the record
is given. IVLID identifies the interval by the week day number (1–7), the standard day number (8) or a date, followed
by the interval start time.
User response: Enter a valid Week day value. If the error occurred in batch, resubmit the job. If you cannot find a
valid reason for the error, contact your system programmer.
EQQX471E BOTH FIELD WEEK DAY AND DATE IN INTERVAL IVLID HAVE A VALUE
Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current
resource description is printed in the dump dataset and the position of the invalid resource specification in the record
is given. IVLID identifies the interval by the week day number (1–7), the standard day number (8) or a date, followed
by the interval start time.
User response: Reset either Week day or Date. If the error occurred in batch, resubmit the job. If you cannot find
a valid reason for the error, contact your system programmer.
EQQX472E FIELD DATE IS INVALID IN INTERVAL IVLID, MUST BE IN FORMAT YYMMDD
Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current
resource description is printed in the dump dataset and the position of the invalid resource specification in the record
is given. IVLID identifies the interval by the week day number (1–7), the standard day number (8) or a date, followed
by the interval start time.
User response: Enter a Date in format YYMMDD. If the error occurred in batch, resubmit the job. If you cannot find
a valid reason for the error, contact your system programmer.
EQQX473E FIELD FROM TIME IS INVALID IN INTERVAL IVLID, MUST HAVE FORMAT HHMM
Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current
resource description is printed in the dump dataset and the position of the invalid resource specification in the record
is given. IVLID identifies the interval by the week day number (1–7), the standard day number (8) or a date, followed
by the interval start time.
User response: Enter a From time in format HHMM. If the error occurred in batch, resubmit the job. If you cannot
find a valid reason for the error, contact your system programmer.
EQQX474E FIELD TO TIME IS INVALID IN INTERVAL IVLID, MUST BE IN FORMAT HHMM
Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current
resource description is printed in the dump dataset and the position of the invalid resource specification in the record
is given. IVLID identifies the interval by the week day number (1–7), the standard day number (8) or a date, followed
by the interval start time.
User response: Enter a To time in format HHMM. If the error occurred in batch, resubmit the job. If you cannot find
a valid reason for the error, contact your system programmer.

Chapter 34. EQQXnnn Messages

431

EQQX475E EQQX479E

EQQX475E FIELD FROM TIME NOT EARLIER THAN TO TIME IN INTERVAL IVLID
Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current
resource description is printed in the dump dataset and the position of the invalid resource specification in the record
is given. IVLID identifies the interval by the week day number (1–7), the standard day number (8) or a date, followed
by the interval start time.
User response: Change the From time or To time, From time must be earlier than To time. If the error occurred in
batch, resubmit the job. If you cannot find a valid reason for the error, contact your system programmer.

| EQQX476E ANOTHER INTERVAL OVERLAPS INTERVAL IVLID
Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The current
resource description is printed in the dump dataset and the position of the invalid resource specification in the record
is given. IVL identifies the interval by the week day number (1–7), the standard day number (8) or a date, followed by
the interval start time.
User response: Change the From and To times in the interval definitions for the identified day. An interval may start
on the same minute as the preceeding interval ends, or later. If the error occurred in batch, resubmit the job. If you
cannot find a valid reason for the error, contact your system programmer.

| EQQX477E FIELD ONERROR IS INVALID, MUST BE F, FX, FS, K OR BLANKS
| System action: The request to write the record is rejected.
| Problem determination: Review the dump dataset (ddname EQQDUMP) of the Tivoli OPC controller for further
| information. The current resource is printed in the dump dataset and the position of the invalid resource specification
| in the record is given.
| User response: Set Onerror in the common segment of the resource record to a two character value as given in the
| message. If the error occurred in batch, resubmit the job. If you cannot find a valid reason for the error, contact your
| system programmer.
| EQQX478E FIELD DEVIATION IS INVALID, MUST BE IN INTERVAL -999999 TO 999999
| System action: The request to write the record is rejected.
| Problem determination: Review the dump dataset (ddname EQQDUMP) of the Tivoli OPC controller for further
| information. The current resource is printed in the dump dataset and the position of the invalid resource specification
| in the record is given.
| User response: Set Deviation in the common segment of the resource description record to an integer value as
| given in the message. If the error occurred in batch, resubmit the job. If you cannot find a valid reason for the error,
| contact your system programmer.
| EQQX479E FIELD GLOBAL AVAILABILITY IS INVALID, MUST BE Y, N OR A BLANK
| System action: The request to write the record is rejected.
| Problem determination: Review the dump dataset (ddname EQQDUMP) of the Tivoli OPC controller for further
| information. The current resource is printed in the dump dataset and the position of the invalid resource specification
| in the record is given.
| User response: Set Global (override) Availability in the common segment of the resource record to a one character
| value as given in the message. If the error occurred in batch, resubmit the job. If you cannot find a valid reason for
| the error, contact your system programmer.

432

Tivoli OPC Messages and Codes

EQQX480E EQQX485E

| EQQX480E FIELD GLOBAL QUANTITY IS INVALID, MUST BE IN INTERVAL 0 TO 999999
| System action: The request to write the record is rejected.
| Problem determination: Review the dump dataset (ddname EQQDUMP) of the Tivoli OPC controller for further
| information. The current resource description is printed in the dump dataset and the position of the invalid resource
| specification in the record is given.
| User response: Set Global (override) Quantity in the common segment of the resource description record to an
| integer value as given in the message. If the error occurred in batch, resubmit the job. If you cannot find a valid
| reason for the error, contact your system programmer.
| EQQX481E FIELD INTERVAL DATE IS OMITTED, THERE MUST BE A VALID DATE
| System action: The request to write the record is rejected.
| Problem determination: Review the dump dataset (ddname EQQDUMP) of the Tivoli OPC controller for further
| information. The current resource is printed in the dump dataset and the position of the invalid resource specification
| in the record is given.
| User response: Set Date in the interval segments of the resource record to a valid date. If the error occurred in
| batch, resubmit the job. If you cannot find a valid reason for the error, contact your system programmer.
| EQQX482E FIELD INTERVAL QUANTITY IS NEGATIVE, MUST BE IN INTERVAL 0 TO 999999
| System action: The request to write the record is rejected.
| Problem determination: Review the dump dataset (ddname EQQDUMP) of the Tivoli OPC controller for further
| information. The current resource is printed in the dump dataset and the position of the invalid resource specification
| in the record is given.
| User response: Set Quantity in the interval segments of the resource record to a valid value. If the error occurred in
| batch, resubmit the job. If you cannot find a valid reason for the error, contact your system programmer.
| EQQX483E WORKSTATION NAME WS DOES NOT MATCH ANY EXISTING WORKSTATION
| System action: The request to write the record is rejected.
| Problem determination: Review the dump dataset (ddname EQQDUMP) of the Tivoli OPC controller for further
| information. The current resource is printed in the dump dataset and the position of the invalid resource specification
| in the record is given.
|
|
|
|
|
|

User response: Set Workstation Names in the default segment and in the interval segments of the resource record
to values that each match at least one of the workstation descriptions or, if this is a current plan resource, at least one
of the current plan workstations. Or, if the error occurred in batch and it is a resource description, set the resource
verification option to accept the workstation names as they are. The verification option can be set either via the
program interface OPTIONS request or via the program interface INIT statement in the EQQYPARM file. Resubmit
the job. If you cannot find a valid reason for the error, contact your system programmer.

| EQQX484E WORKSTATION NAME WS DOES NOT MATCH ANY EXISTING WORKSTATION
| Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The erroneous
| resource is printed in the dump dataset and the position of the invalid specification is given.
| User response: Remove the duplicate.
| EQQX485E THE RESOURCE NAME MUST NOT BE BLANK.
| System action: The request to write the record is rejected.
| Problem determination: Review the dump dataset (ddname EQQDUMP) for further information. The erroneous
| resource is printed in the dump dataset and the position of the invalid specification is given.
| User response: Specify a valid resource name.

Chapter 34. EQQXnnn Messages

433

EQQX486E EQQX501E

| EQQX486E THE CRITICAL JOB ATTRIBUTE MUST BE Y OR N.
| Explanation: The critical job attribute is invalid.
| System action: The request is rejected.
| User response: Enter a valid critical job attribute. If you cannot find a valid reason for the error, contact your system
| programmer.
| System programmer response: If you are using the programming interface, provide the correct critical job attribute,
| and if the error persists, contact your IBM representative.
| EQQX487E THE LATE JOB POLICY MUST BE E, D, L, C, OR BLANK
| Explanation: The late job policy is invalid. The only valid values are:
| E

Estimated Duration. The job is assisted if it runs beyond its estimated duration.

| D

Deadline. The job is assisted if it has not finished when its deadline time is reached.

| L

Latest Start Time. The job is assisted if it is submitted after its latest start time.

| C

Conditional An algorithm calculates whether to apply the Deadline policy or the Latest Start Time policy.

| ''

OPC WLM will eventually use the policy specified in OPCOPTS.

| System action: The request is rejected.
| User response: Enter a valid late job policy attribute. If you cannot find a valid reason for the error, contact your
| system programmer.
| System programmer response: If you are using the programming interface, provide the correct late job policy
| attribute, and if the error persists, contact your IBM representative.
EQQX500E GROUP DEFINITION ID GRPDEF IS INVALID
Explanation: The group definition ID field contains invalid characters.
System action: The data is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the record and the position of the error.
User response: Specify a valid group definition ID. If the error occurred in batch, resubmit the job. If you cannot
find the reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, contact your IBM representative.
EQQX501E GROUP DEF ID GRPDEF NOT IN BRACKETED DBCS FORMAT
Explanation: The group definition ID field should be in DBCS format, that is, it should start with a shift-out (X'0E')
character and end with a shift-in (X'0F') character. Either shift-out or shift-in, or both, are missing.
System action: The data is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the failing record and the position of the error.
User response: Specify a valid group definition ID. If the error occurred in batch, resubmit the job. If you cannot
find the reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, contact your IBM representative.

434

Tivoli OPC Messages and Codes

EQQX502E EQQX505E

EQQX502E UNPAIRED SHIFT-OUT OR SHIFT-IN CHARS IN GRPDEF
Explanation: The group definition ID field contains one or more extra shift-out or shift-in characters.
System action: The data is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the failing record and the position of the error.
User response: Specify a valid group definition ID. If the error occurred in batch, resubmit the job. If you cannot
find the reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, contact your IBM representative.
EQQX503E INVALID DBCS-CHARACTER(S) IN GRPDEF
Explanation: The group definition ID field contains out-of-range DBCS characters. With the exception of DBCS
blank, X'4040', each byte must be in the range X'41' to X'FE'.
System action: The data is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the failing record and the position of the error.
User response: Specify a valid group definition ID. If the error occurred in batch, resubmit the job. If you cannot
find the reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, contact your IBM representative.
EQQX504E ODD NUMBER OF BYTES IN GRPDEF
Explanation: The group definition ID field is specified as a DBCS field and requires two bytes per character, that is,
the number of bytes must be a multiple of two.
System action: The data is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the failing record and the position of the error.
User response: Specify a valid group definition ID. If the error occurred in batch, resubmit the job. If you cannot
find the reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, contact your IBM representative.
EQQX505E NO ID SPECIFIED FOR DBCS GROUP DEFINITION
Explanation: The group definition ID field contains shift-out and shift-in DBCS characters, but you have not specified
a valid value for the group definition.
System action: The data is rejected.
Problem determination: Look in the dump dataset (ddname EQQDUMP) for further information. This dataset
contains a copy of the failing record and the position of the error.
User response: Specify a valid group definition ID. If the error occurred in batch, resubmit the job. If you cannot
find the reason for the error, contact your system programmer.
System programmer response: Review the Tivoli OPC message log to determine the cause of the error. If you
cannot determine the cause of the error, contact your IBM representative.

Chapter 34. EQQXnnn Messages

435

EQQX506E EQQX610E

| EQQX506E THE APPLICATION DESCRIPTION (GROUP DEFINITION) GRPDEF DOES NOT EXIST
| System action: The request to write the record is rejected.
| Problem determination: Review the dump dataset (ddname EQQDUMP) of the Tivoli OPC controller for further
| information. The current application description is printed in the dump dataset and the position of the invalid
| specification in the record is given.
|
|
|
|
|

User response: Set Application Group Definition in the common segment of the application description record to the
name of an existing application description that is defined as an Application Group Definition. Or, if the error occurred
in batch, set the Application Group verification option to accept the application group names as they are. Use either
the program interface OPTIONS request or the program interface INIT statement in the EQQYPARM file to set the
verification option. Resubmit the job. If you cannot find a valid reason for the error, contact your system programmer.
EQQX604E SELECT ONE OF THE LU NAME LINES
Explanation: There must be at least one entry in the subsystem name table and exactly one row must be selected
by a / in the first column.
System action: The system waits for you to respond.
User response: If you are logged on to TSO on the MVS where the Tivoli OPC controller is running, select the row
with the Controller subsystem name and no Server LU name. If you are logged on to TSO on another MVS, select a
row with a LU name specified, thereby selecting the proper Controller subsystem and the LU name of the Server
handling the communication to the Controller.
EQQX605E SELECT ONE AND ONLY ONE OF THE LU NAME LINES
Explanation: Only one of the entries in the subsystem name table can be selected by a / in the first column.
System action: The system waits for you to respond.
User response: If you are logged on to TSO on the MVS where the Tivoli OPC controller is running, select the row
with the Controller subsystem name and no Server LU name. If you are logged on to TSO on another MVS, select a
row with a LU name specified, thereby selecting the proper Controller subsystem and the LU name of the Server
handling the communication to the Controller.
EQQX606E EACH ROW MUST HAVE A DIFFERENT SUBSYSTEM NAME/LU NAME COMBINATION
Explanation: The subsystem name table must have unique rows.
System action: The system waits for you to respond.
User response: Remove one of the rows with the same values on both Controller subsystem name and Server LU
name.
EQQX610E VERB IN STATE STATE FAILED, RC RC, SR SR, DR DR
Explanation: An APPC/MVS service request issued for server communication failed. The verb VERB was issued
when the conversation was in state STATE. APPC/MVS returned: Return_Code RC, Status_Received SR and
Data_Received DR.
System action: The request is rejected.
User response: Check that the proper LU name is specified. For the dialog the LU name is set via the OPTIONS
menu. A program interface application sets the LU name through the EQQYPARM parameter file or through the INIT
request. Repeat the dialog action from the Tivoli OPC primary option panel or rerun the program interface application.
System programmer response: Check the meaning of the APPC/MVS return codes. Check the message log of the
server for a message explaining the communication loss. If the error reoccurs, report the error to your IBM
representative.

436

Tivoli OPC Messages and Codes

EQQX611E EQQX615E

EQQX611E APPC/MVS VERB VERB FAILED RC RC, SR SR, DR DR
Explanation: An APPC/MVS service request issued for server communication failed. The verb VERB was issued
when the conversation was in state STATE. APPC/MVS returned: Return_Code RC, Status_Received SR and
Data_Received DR.
System action: The request is rejected.
User response: Check that the proper LU name is specified. For the dialog the LU name is set via the OPTIONS
menu. A program interface application sets the LU name through the EQQYPARM parameter file or through the INIT
request. Repeat the dialog action from the Tivoli OPC primary option panel, or rerun the program interface
application.
System programmer response: Check the meaning of the APPC/MVS return codes. Check the message log of the
server for a message explaining the communication loss. If the error reoccurs, report the error to your IBM
representative.
EQQX612E INSUFFICIENT VIRTUAL STORAGE, DIAGNOSTIC INFO ALT
Explanation: A routine for communication with the server failed because it could not obtain sufficient amount of
virtual storage.
System action: The request is rejected.
User response: Log on to TSO with a larger SIZE parameter value or rerun the program interface application with a
larger specified region.
EQQX614E REQUEST FAILED, SEVERE ERROR AT SERVER LU
Explanation: An error occurred at the server preventing it from completing a service.
System action: The dialog or program interface application cannot continue.
System programmer response: Check the message log of the server for a message explaining the error at the
server.
User response: Check that the proper LU name is specified. For the dialog the LU name is set via the OPTIONS
menu. A program interface application sets the LU name through the EQQYPARM parameter file or through the INIT
request. Repeat the dialog action from the Tivoli OPC primary option panel, or rerun the program interface
application.
System programmer response: Check the message log of the server for a message explaining the communication
problem. If the problem reoccurs, report the error to your IBM representative.
EQQX615E FAILED TO SET UP COMMUNICATION WITH SERVER LU, RC RC
Explanation: An APPC/MVS Allocate request issued for server communication failed. LU shows the LU name of the
server. RC shows the return code of the Allocate request.
System action: The user cannot enter the OPC dialog. The INIT request of program interface application gets a
return code of 8.
User response: Check that the proper LU name is specified. For the dialog the LU name is set via the OPTIONS
menu. A program interface application sets the LU name through the EQQYPARM parameter file or through the INIT
request. Repeat the dialog action from the Tivoli OPC primary option panel or rerun the program interface application.

Chapter 34. EQQXnnn Messages

437

EQQX616E EQQX617E

EQQX616E SECURITY ENVIRONMENT CREATE FAILED, THE SERVER RECEIVED NO USERID
Explanation: No user ID was available for the server. It is required by the server when building a security
environment for this user.
System action: The user cannot start the OPC dialog via this server. The INIT request of program interface
application gets a return code of 8.
User response: Check that the LU name has been defined in the APPL statement, in SYS1.VTAMLST. Refer to the
Tivoli OPC Installation Guide for the correct value of the SECACPT keyword. For the dialog the LU name is set via
the OPTIONS menu. A program interface application sets the LU name through the EQQYPARM parameter file or
through the INIT request. Repeat the dialog action from the Tivoli OPC primary option panel or rerun the program
interface application.
EQQX617E SECURITY ENVIRONMENT CREATE FAILED, SAF RC XSSRC RACF RC XSSRS, RS XSSAB
Explanation: The server failed to create a security environment for this user. The SAF return code and the RACF
return and reason codes of the failing RACROUTE VERIFY=CREATE is given in the message.
System action: The user cannot start the OPC dialog remotely. The INIT request of program interface application
gets a return code of 8.

|
|
|
|

User response: If you are using APPC communication, check that the correct LU name is specified. For the dialog,
the LU name is set via the OPTIONS menu. A program interface application sets the LU name through the
EQQYPARM parameter file or through the INIT request. Repeat the dialog action from the Tivoli OPC primary option
panel or rerun the program interface application.

| If you are using the Tivoli Job Scheduling Console to access Tivoli OPC you should check the authorizations related
| to the RACF user linked to the Tivoli OPC user provided by the Tivoli Job Scheduling Console.

438

Tivoli OPC Messages and Codes

EQQY001I EQQY007W

Chapter 35. EQQYnnn Messages
EQQY001I STATEMENTS FOR AD AD PROCESSED SUCCESSFULLY
Explanation: The statements for creating an application description (AD) have been received. Syntax checking has
revealed no error.
System action: Processing continues.
User response: None.
EQQY002I STATEMENTS FOR OI TO AD PROCESSED SUCCESSFULLY
Explanation: The statements for creating an operator instruction (OI) have been received. Syntax checking has
revealed no error.
System action: Processing continues.
User response: None.
EQQY003E OPTION STATEMENT NOT FIRST IN INPUT FILE. PROCESSING IS DONE IN SCAN MODE
Explanation: If there is an OPTION statement in the Tivoli OPC batch loader SYSIN file, it must be the first
statement. An OPTION statement that is not the first statement has been found.
System action: The statements after the misplaced OPTION statement are processed in SCAN mode.
User response: Check that the input data in front of the misplaced OPTION statement is handled correctly. Correct
the input file and resubmit the job.
EQQY004I END OF PROCESSING. HIGHEST RETURN CODE RC
Explanation: No more statements remain to be processed. The highest return code set when processing the
statements is RC.
System action: Processing is ended.
User response: If RC is not zero, review the message log to determine the cause of the nonzero return code.
EQQY005W OPEN OF FILE FILE FAILED, VALIDATION OF THE RECS WILL BE INCOMPLETE
Explanation: A file required for validation of the created records cannot be opened. For validation of application
descriptions, a file with workstation descriptions and calendar descriptions is required (ddname EQQWSDS). For
validation of operator instructions, a file with application descriptions is required (ddname EQQADDS). These files are
required only if the output is directed to a VSAM file.
System action: The rest of the input statements are scanned for data type errors.
User response: Check that the correct names of datasets are specified in the JCL and resubmit the job.
EQQY007W THIS STM STATEMENT IS NOT PRECEDED BY A VALID MSTM STATEMENT THE STATEMENT IS
PROCESSED IN SCAN MODE.
Explanation: The ADSTART and OISTART statements start up the creation of a record. After ADSTART is entered,
only an application description (AD) details statement or another ADSTART or OISTART statement is allowed. After
an OISTART statement, only an OIT statement or another ADSTART or OISTART statement is allowed. MSTM is an
ADSTART or OISTART statement; STM is a details statement.
System action: The statement is scanned only for data type errors.
User response: Correct the input file, grouping all statements for the creation of one record together, and resubmit
the job.

 Copyright IBM Corp. 1991, 1999

439

EQQY008W EQQY020W

EQQY008W STATEMENT STM IS BYPASSED DUE TO PARSER DETECTED ERROR
Explanation: The statement parser has detected an error in statement STM.
System action: Processing continues. The creation of the current record is abandoned and the remaining
statements for the same record are bypassed.
Problem determination: The parser-detected error is given by the preceding message.
User response: Correct the error described by the previous message and rerun.
EQQY009W STATEMENT STM IS PROCESSED IN SCAN MODE DUE TO ERROR IN PREVIOUS STATEMENT
Explanation: This statement is for the same record as an earlier statement in which an error was detected.
System action: Processing continues.
User response: Correct the erroneous statement and rerun.
EQQY011E INSERT OF APPLICATION ADID FAILED
Explanation: The program interface request to INSERT application ADID into the current plan failed.
System action: Processing continues.
Problem determination: The preceding message gives the reason why the insert could not be done.
User response: Correct the error described by the previous message and rerun.
EQQY014W SUBSYS(NAME) AND CHECK(N) SPECIFICATIONS ARE MUTUALLY EXCLUSIVE. THE CHECK
REQUEST IS IGNORED
Explanation: The validation of the output data cannot be suppressed when the output data from the batch loader
goes to a Tivoli OPC subsystem.
System action: Processing continues. The normal data validation is applied.
User response: Remove the CHECK keyword.
EQQY015W ACTION(SCAN) AND CHECK(Y) SPECIFICATIONS ARE MUTUALLY EXCLUSIVE. THE CHECK
REQUEST IS IGNORED
Explanation: No validation of output data is performed when ACTION(SCAN) is specified. By ACTION(SCAN), a
check is done (on the batch loader statements) to verify that keywords are correctly specified and that the required
values are set. No output data is produced and no consistency checking is done.
System action: Processing continues. No data validation is done.
User response: Remove the CHECK keyword.
EQQY020W CONFLICTING FORMAT SPECIFICATION BETWEEN SUBS AND THE KW KEYWORD FORMAT
FORM IS USED
Explanation: The character format for the application ID and owner ID used in the Tivoli OPC subsystem is used by
the batch loader when the output is directed to a subsystem.
System action: Processing continues using the DBCS option FORM for the KW data.
User response: Remove the KW keyword.

440

Tivoli OPC Messages and Codes

EQQY021E EQQY035E

EQQY021E SUBSYS SUBS IS SPECIFIED IN OPTIONS STATEMENT, IT IS SET TO YSUBS IN THE INIT
STATEMENT OF THE EQQYPARM FILE
Explanation: Two different subsystem names are specified.
System action: The record being created is considered in error and is not created. The following statements are
scanned and validated.
User response: Remove or change the SUBSYS parameter of the SYSIN file OPTIONS statement or change the
SUBSYS parameter of the EQQYPARM file INIT statement.
EQQY031E ADRULE VALID ONLY FOR RUN CYCLES WITH TYPE R OR E
Explanation: You can specify the ADRULE control statement only for run cycles with type R (Regular rule) or E
(Exception rule).
System action: The application is not saved in the application description database because the run cycle is invalid.
User response: Change the run cycle type or remove the rule definition, and rerun the job.
EQQY032E DUPLICATE ADRULE CONTROL STATEMENT. ONLY 1 ADRULE IS ALLOWED FOR EACH ADRUN
Explanation: You can specify only one ADRULE control statement for each run cycle.
System action:

The application is not saved in the application description database because the run cycle is invalid.

User response: Remove the extra ADRULE control statement or add an ADRUN statement before the second
ADRULE.
EQQY033E NO ADRULE SPECIFIED FOR A RUN CYCLE WITH TYPE R OR E
Explanation: The ADRUN control statement specifies type R (Regular rule) or E (Exception rule), but there is no
ADRULE statement.
System action: The application is not saved in the application description database because the run cycle is invalid.
Problem determination: Review the dump dataset (ddname EQQDUMP) for more information. The run cycle part
of the current application description is printed in the dataset and the position of the invalid value in the record is
given.
User response: Add the ADRULE control statement to define a rule or change the TYPE on the ADRUN statement.
EQQY034E ERROR IN ADRULE CONTROL STATEMENT FOR RUN CYCLE VADRN IN APPLICATION VADID
Explanation: The ADRULE control statement for run cycle VADRN contains an error. Messages that precede this
message give more details about the error.
System action: The application is not saved in the application description database because the run cycle is invalid.
Problem determination: Review the dump dataset (ddname EQQDUMP) for more information. The run cycle part
of the current application description is printed in the dataset and the position of the invalid value in the record is
given.
User response: Correct the error and rerun the job.
EQQY035E INCORRECT LENGTH FIELD FOR ADRULE IN RUN CYCLE VADRN
Explanation: The length specified in the ADRIRDLEN field is not the same as the length in the ADRULEL field of the
rule.
System action: The application is not saved in the application description database because the run cycle is invalid.
Problem determination: Review the dump dataset (ddname EQQDUMP) for more information. The run cycle part
of the current application description is printed in the dataset and the position of the invalid value in the record is
given.
User response: Specify the correct length in both fields and rerun the job.

Chapter 35. EQQYnnn Messages

441

EQQY050E EQQY108E

EQQY050E VALIDATION FAILED FOR: BLOCK, REASON: REASON, OFFSET: POS
Explanation: The control block BLOCK contains an error at offset POS.
System action: If this is a request to the program interface function, the request is rejected and control is returned
with the return code set to error.
Problem determination: The dump dataset (ddname EQQDUMP) contains a dump of the failing control block.

| The reason code REASON indicates the reason for the failure. See Chapter 39, “Reason Codes” on page 539 for a
| list of the reason codes and their meanings.
User response: Correct the request according to the specified reason codes. If you cannot find a valid reason for
the error, contact your system programmer.
System programmer response: If you cannot find a valid reason for the error, save the dump dataset and the
message log, and contact your IBM representative.

| EQQY105I KEYWORD KEY IN STATEMENT STMT IS IGNORED.
| Explanation: The keyword KEY has no significance in the current environment.
| System action: Processing continues.
| System programmer response: Remove the keyword KEY from the statement STMT.
EQQY106E KEYWORD KEY CANNOT BE GIVEN A DEFAULT
Explanation: When ACTION(SETDEF) is specified, KEY cannot be specified.
System action: The record being created is considered in error and is not created. The statements following this
record that add details to the record are scanned for valid data types.
User response: Correct the input file and resubmit the job.
For more information about the keyword, refer to Tivoli OPC Planning and Scheduling the Workload.
EQQY107E KEYWORD KEY IS REQUIRED
Explanation: You did not specify the required keyword. The keyword KEY is a required keyword and cannot be
omitted.
System action: The record being created is considered in error and is not created. The statements following this
record that add details to the record are scanned for valid data types.
User response: Correct the input file and resubmit the job.
For more information about the keyword, refer to Tivoli OPC Planning and Scheduling the Workload.
EQQY108E KEYWORD KEY HAS AN UNSUPPORTED VALUE VAL
Explanation: You specified an invalid value for the keyword. The keyword KEY can have only a certain set of
values or abbreviations of these values.
System action: The record being created is considered in error and is not created. The statements following this
record that add details to the record are scanned for valid data types.
User response: Correct the input file and resubmit the job.
For more information about the keyword, refer to Tivoli OPC Planning and Scheduling the Workload.

442

Tivoli OPC Messages and Codes

EQQY109E EQQY201E

EQQY109E KEYWORD KEY HAS AN UNAMBIGUOUS VALUE VAL
Explanation: The value of the keyword KEY is abbreviated so that it matches more than one of the valid values.
System action: The record being created is considered in error and is not created. The statements following this
record that add details to the record are scanned for valid data types.
User response: Correct the input file and resubmit the job.
For more information about the keyword, refer to Tivoli OPC Planning and Scheduling the Workload.
EQQY121E LENGTH OF KEY VALUE IS L, MAXIMUM LENGTH IS MAXL
Explanation: The character field that is specified as a keyword value is too long.
System action: The following statements for the same record are bypassed. No record is produced.
User response: Modify the keyword and rerun.
EQQY122I KEY VALUE V EXCEEDS THE MAXIMUM MAXV, THE MAXIMUM VALUE IS USED
Explanation: The integer value that is specified as a keyword value is too large.
System action: The maximum value is used.
User response: Correct the keyword value.
EQQY132E FLD VALUE INT IS OUTSIDE SUPPORTED RANGE MINV - MAXV
Explanation: The value of the field FLD in a program interface control block is required to be in a certain range. A
value outside this range is detected when a database record is created from the control block.
System action: Processing continues.
Problem determination: If this message is issued in a batch loader run, use the MSGLEVEL keyword of the
OPTION statement to get more information and to find the batch loader statement specifying a keyword value that is
outside its valid range.
User response: Check the input data.
EQQY133E FLD VALUE IND IS NOT ONE OF THE SUPPORTED VALUES: A B C
Explanation: The value of the field FLD of a program interface control block is required to have one of the values
shown in the message. Another value is detected when a database record is created from the control block.
System action: Processing continues.
Problem determination: If this message is issued in a batch loader run, use the MSGLEVEL keyword of the
OPTION statement to get more information and to find the batch loader statement specifying a keyword value that is
not one of the accepted values.
User response: Check the input data.
EQQY201E AN REC RECORD TO BE ADDED WOULD REPLACE AN EXISTING ONE, NO UPDATE IS DONE
KEY OF THE RECORD IS: KEY. THE REPLACE OPTION IS NOT SPECIFIED
Explanation: The application description or operator instruction already exists.
System action: The present value is kept and the new value is rejected.
User response: Update the record by specifying the REPLACE option and rerunning the statements to create the
record.

Chapter 35. EQQYnnn Messages

443

EQQY202E EQQY209E

EQQY202E TOO MANY VERSIONS, AD WITH KEY KEY IS NOT ADDED
Explanation: When applications with the same application ID, but different valid-from dates are specified, only four
different dates can be specified.
System action: The new application description is rejected.
User response: Choose the versions you want and update accordingly.
EQQY204E WHEN KEY IS SPECIFIED, ALSO THE TIME MUST BE SPECIFIED
Explanation: When you specify the input day for an application, you must also specify the input arrival time. When
you specify the deadline day for an application, you must also specify the deadline time. KEY indicates which of
these times is missing.
System action: The new application description is rejected.
User response: Check the statements for a missing time when the day has been set and update accordingly.
EQQY205E NO PREDECESSOR OPERATION SPECIFIED, SPECIFY PREWSID, PREOPNO AND/OR PREJOBN
Explanation: An ADDEP statement that does not identify any predecessor operation is received from the input file.
System action: The application description is rejected.
User response: Correct the input file and resubmit the job.
EQQY206E FAILED TO UPDATE AD KEY OPERATION OP WITH PREDECESSOR INFORMATION THE
PREDECESSOR IS AD PID OPERATION POP
Explanation: An application has been written with temporary information in the external predecessor section. It is
now to be updated by the correct predecessor information, predecessor operation number or the workstation name, or
both. The update fails because the predecessor section cannot be identified. The application might have been
modified since it was written by the batch loader.
System action: The application description is deleted.
User response: Repeat the batch loader execution with only this application description in the input. If the problem
reoccurs, report the error to your IBM representative.
EQQY207E AN APPLICATION BELONGING TO AN APPLICATION GROUP CANNOT HAVE RUN CYCLES KEY
OF THE RECORD IS: KEY
Explanation: An application that references a group definition for run cycle information cannot itself contain run
cycles.
System action: The application description is rejected.
User response: Correct the input file and resubmit the job.
EQQY208E A GROUP DEFINITION CANNOT HAVE OPERATIONS KEY OF THE RECORD IS: KEY
Explanation: A group definition cannot contain operations.
System action: The application description is rejected.
User response: Correct the input file and resubmit the job.
EQQY209E A GROUP DEFINITION CANNOT HAVE PREDECESSOR OPERATIONS KEY OF THE RECORD IS:
KEY
Explanation: A group definition cannot contain predecessor operations.
System action: The application description is rejected.
User response: Correct the input file and resubmit the job.

444

Tivoli OPC Messages and Codes

EQQY211E EQQY223E

EQQY211E TOO MANY SIGN START DAYS ENTERED, AT MOST NUM ARE ACCEPTED
Explanation: The application can only be selected NUM times for one run cycle.
System action: The application description is rejected.
User response: Correct the input file and resubmit the job. If you need to select more days, repeat the run cycle the
necessary number of times.
EQQY221E NO OPERATION IN PID MATCHES THE PREDECESSOR SPECIFICATION SUCCESSOR KEY: KEY,
SUCCESSOR OPERATION: OP PREDECESSOR SPECIFICATION JOBNAME: JOB, WORK STATION:
WS
Explanation: No operation in the predecessor application matches the specification given in the message text. A
blank means that no value is specified. A predecessor operation can be specified by workstation name, operation
number, or job name, or by any combination of the three items. If the predecessor is required by another application
or another occurrence of the same application, an application ID is also required.
System action: The application description is rejected.
User response: Correct the input file and resubmit the job.
EQQY222E MORE THAN ONE OPERATION IN PID MATCHES THE PREDECESSOR SPECIFICATION
SUCCESSOR KEY: KEY, SUCCESSOR OPERATION: OP PREDECESSOR SPECIFICATION:
JOBNAME: JOB, WORK STATION: WS
Explanation: More than one operation in the predecessor application matches the specification given in the message
text. A blank means that no value is specified. A predecessor operation can be specified by workstation name,
operation number, or job name, or by any combination of the three items. If the predecessor is required by another
application or another occurrence of the same application, an application ID is also required.
System action: The application description is rejected.
User response: Correct the input file and resubmit the job.
EQQY223E FAILED TO UPDATE KEY, OPERATION OP WITH PREDECESSOR INFORMATION PREDECESSOR:
PID, OPERATION: POP. REASON CODE RS
Explanation: An application has been written to the database with temporary predecessor information. The update
of the predecessor section, to add the correct information, has failed.
Possible reasons as given by RS are:
The read failed for the application to be updated.
The update write failed.
The update failed because the predecessor could not be identified. The application description might have been
updated previously.
System action: The application description is rejected.
Problem determination: The message log of the subsystem contains a detailed description of the error.
User response: Resubmit the job with only this application description. If the problem reoccurs, report the error to
your IBM representative.

Chapter 35. EQQYnnn Messages

445

EQQY224E EQQY228E

EQQY224E FAILED TO UPDATE KEY TO BE VALID UP TO VTO. REASON CODE RS
Explanation: A new application description overlaps the validity period of an existing application description. You
tried to adjust the validity of the existing version to the day before the new version becomes valid, but this update
failed.
Possible reasons as given by RS are:
The read failed for the application description to be updated.
The update write failed.
System action: The application description is rejected.
Problem determination: The message log of the subsystem contains a detailed description of the error.
User response: Resubmit the job with only this application description. If the problem reoccurs, report the error to
your IBM representative.
EQQY225E FAILED TO DELETE KEY. REASON CODE RS
Explanation: The deletion of an application description failed.
The application description to delete can be one of the following as given by RS:
1. The new application description was output to a VSAM file.
2. An existing application description whose valid-to date has been adjusted to create two versions. The update of
the new version failed.
3. The new application description could not be updated correctly.
System action: None.
Problem determination: For reasons 2 and 3, the message log should also contain a message explaining why the
new application could not be updated and a detailed description of the error.
User response: If the output is to a subsystem, use the Application Description dialog to delete the application
description. If the problem reoccurs, report the error to your IBM representative.
EQQY227E NO OPERATION IN PID MATCHES THE SPECIFICATION OPERATOR INSTRUCTION KEY: KEY.
OWNING OPERATION SPECIFIED BY JOBNAME: JOB, WORK STATION: WS
Explanation: An owning operation can be specified by workstation name, operation number, or job name, or by any
combination of the three items, together with the application ID.
No operation in the application matches the specification given in the message text. A blank means that no value is
specified.
System action: The operator instruction is rejected.
User response: Correct the input file and resubmit the job.
EQQY228E MORE THAN ONE OPERATION IN PID MATCHES THE SPECIFICATION OPERATOR INSTRUCTION
KEY: KEY. OWNING OPERATION SPECIFIED BY JOBNAME: JOB, WORK STATION: WS
Explanation: An owning operation can be specified by workstation name, operation number, or job name, or by any
combination of the three items, together with the application ID.
More than one operation in the application matches the specification given in the message text. A blank means that
no value is specified.
System action: The application description is rejected.
User response: Correct the input file and resubmit the job.

446

Tivoli OPC Messages and Codes

EQQY229E EQQY237E

| EQQY229E SETUP FOR OPERATION: POP IN APPLICATION: PID NOT COMPLETE
| Explanation: A SELECT JCLPREP was done without completion of the listed operation.
| System action: None.
| User response: Correct the error and resubmit the job. The operation in the application matches the specification
| given in the message text. A blank means that no value is specified.
EQQY233E FAILED TO ADD OPERATOR INSTRUCTION FOR AD: AD, OPERATION: OP REASON CODE RS
Explanation: An operator instruction has been written to the database with temporary information. The update of it,
together with the correct information about the operation to which it belongs, has failed.
Possible reasons as given by RS are:
The read of the temporary instruction failed.
The update failed.
System action: The operator instruction is rejected.
Problem determination: The message log contains a detailed description of the error. If the output is to a Tivoli
OPC subsystem, these descriptions are found in the message log of the subsystem.
User response: Resubmit the job with only this operator instruction. If the problem reoccurs, report the error to your
IBM representative.
EQQY234E FAILED TO DELETE OPERATOR INSTRUCTION: KEY. REASON CODE: RS
Explanation: The deletion of an operator instruction failed.
Possible reasons as given by RS are:
A read of the operator instructions failed.
The delete operation failed.
System action: None.
Problem determination: The message log contains a detailed description of the error.
User response: Check if the operator instruction still exists there, by allocating the output file to a Tivoli OPC
subsystem. If it does, use the Operator Instruction dialog to delete it. If the problem reoccurs, report the error to your
IBM representative.
EQQY235E NO OPERATION SPECIFIED, SPECIFY WSID, OPNO AND/OR JOBN
Explanation: An OISTART statement, which does not identify the owning operation, is received from the input file.
System action: The operator instruction is rejected.
User response: Correct the input file and resubmit the job.
EQQY236E NO SETUP SESSION HAS YET BEEN ESTABLISHED FOR THE CURRENT OPERATION
Explanation: You tried to issue an INSERT request for resource JCLPREP without first issuing a successful
SELECT JCLPREP request.
System action: The update of JCL variable values is rejected.
User response: Correct the program interface (PIF) user program and retry.
EQQY237E PROMPT VARIABLES HAVE NOT BEEN SET
Explanation: You tried to perform an INSERT of JCLPREP. At least one of the required prompt variables has not
been set.
System action: The update of JCL variable values is rejected.
User response: Check your program to see if it processes correctly.

Chapter 35. EQQYnnn Messages

447

EQQY238E EQQY244E

EQQY238E A GROUP DEFINITION CANNOT HAVE SPECIAL RESOURCES KEY OF THE RECORD IS: KEY
Explanation: A group definition cannot contain special resources.
System action: The application description is rejected.
User response: Correct the input file and resubmit the job.
EQQY239E INVALID ARGUMENT VALUE VAL FOR SIMTIME ARGUMENT
Explanation: A program interface (PIF) program has requested simulated substitution (resource JCLPREPA). A
SIMTIME value that is not in CCYYMMDDHHMM format or that contains an invalid value has been requested.
System action: The simulated substitution of the JCL for this operation is not performed.
User response: Correct the PIF program and retry.
EQQY240E INVALID ARGUMENT VALUE VAL FOR SIMTYPE ARGUMENT
Explanation: A program interface (PIF) program has requested simulated substitution (resource JCLPREPA). A
SIMTIME value that is not 'FULL' or 'PARTIAL' has been requested.
System action: The simulated substitution of the JCL for this operation is not performed.
User response: Correct the PIF program and retry.
EQQY241E INVALID ARGUMENT VALUE VAL FOR ARGUMENT ARG. THE REQUEST IS REQ RES
Explanation: In the request argument name ARG is specified. The corresponding argument value pointer locates
the value VAL. Argument ARG cannot have this value.
System action: The request is rejected.
User response: Correct the request and resubmit the job.
EQQY242E MULTIPLE MATCHTYP ARGUMENTS IN A REQ REQUEST FOR RES

| Explanation: The ARGN parameter can contain only one argument controlling the selection on resource name and
| operation status and only one argument controlling selection by owner ID.
System action: The request is rejected.
User response: Check that there is a blank entry indicating the end of the ARGN parameter. Correct the request
and resubmit the job.

| EQQY243E INVALID ARGUMENT ARG IN SELECT REQUEST AFTER LIST REQUEST FOR SEQUENTIAL
|
RETRIEVAL
|
|
|
|

Explanation: This message is issued for a SELECT request. The SELECT request reads elements from a list.
Argument NEXT is specified. When the list was created, argument SEQN was specified in the LIST request. When
processing a list in this way the only arguments accepted in the SELECT request are NEXT and SEQN, not the
argument given in the message.

| System action: The request is rejected.
| User response: Correct the program interface application.
| EQQY244E THE VALUE OF ARG IS VAL, MUST BE ZERO. THE REQUEST IS VAL RES
| Explanation: When the argument NEXT is specified, the argument value address must be binary zero or point to a
| binary zero fullword field.
| System action: The request to write the record is rejected.
| User response: Correct the program interface application.

448

Tivoli OPC Messages and Codes

EQQY245E EQQY306W

| EQQY245E THE DEFAULT CALENDAR NAME IS REQUIRED BUT IS NOT AVAILABLE. THE REQUEST IS REQ
|
RES
| System action: The request to write the record is rejected.
|
|
|
|

User response: Make sure that a default calendar is specified for the program interface. If necessary, use either the
program interface OPTIONS request or the program interface INIT statement in the EQQYPARM file to set the default
calendar name. In the program interface application, if the CALENDAR argument is unintentionally left out in a
SELECT statement for the CL resource, correct the program.
EQQY301E FAILED TO OPEN DATA SET WITH DDNAME DDN
Explanation: The file given by ddname DDN is required for processing, but could not be opened. The file can be
either SYSIN or EQQOIPDS.
System action: If SYSIN fails to open, the batch loader processing is terminated. If EQQOIPDS fails to open, no
operator instructions are created for OISTART statements with MEMBER specified as the keyword.
User response: Determine why the file is not available. Correct the input and resubmit the job.
EQQY302E LOGICAL RECORD SIZE OF OI MEMBER DATA SET, DDNAME EQQOIPDS, IS NOT VALID
Explanation: The EQQOIPDS dataset must have a logical record length of 80.
System action: No operator instructions are created for OISTART statements with the MEMBER specified as the
keyword.
User response: Convert the EQQOIPDS dataset to a record length of 80 and resubmit the job.
EQQY303E MEMBER MEM DOES NOT EXIST IN THE EQQOIPDS DATA SET
Explanation: The batch loader statement OISTART specifies a PDS member name that does not exist in the dataset
allocated to ddname EQQOIPDS.
System action: Processing continues. The creation of the current record is abandoned and the remaining
statements for the same record are bypassed.
User response: Correct the member name or check that the correct dataset is allocated to ddname EQQOIPDS.
EQQY304E ERROR OCCURRED WHILE READING MEMBER MEM FROM THE EQQOIPDS DATA SET
Explanation: The PDS member could not be read.
System action: Processing continues. The creation of the current record is abandoned and the remaining
statements for the same record are bypassed.
Problem determination: The preceding message gives detailed information about the read error.
User response: Follow the instructions for the preceding message.
EQQY306W TOO LONG OI ROW ENTERED, STARTS BY ST. IT IS TRUNCATED
Explanation: You entered an operator instruction (OI) text row that is longer than 72 characters. It is truncated to 72
characters.
System action: The OI is created.
User response: Correct the input file and resubmit the job.

Chapter 35. EQQYnnn Messages

449

EQQY700E EQQY706E

EQQY700E THE COMMUNICATION BLOCK PARAMETER DOES NOT POINT TO A COMMUNICATION BLOCK
Explanation: The validation of the parameters in a program interface call found that the communication block
address is not locating a valid communication block.
System action: Processing continues.
User response: Make sure that the communication block address returned at the INIT request is used in the
following program interface requests. Also make sure that the area located by the communication block address is
not overlayed and that there was no error at the INIT request.
EQQY701E INVALID PARAMETER VALUE IN CALL TO EQQYCOM, PARAMETER: PAR, VALUE: REQ
Explanation: The PAR parameter (could be either REQUEST or RESOURCE) has an unsupported value REQ.
System action: The request is rejected.
User response: Correct the request and resubmit the job.
EQQY702E UNSUPPORTED ARGUMENT NAME: ARG IN REQ STATEMENT, RESOURCE IS RES
Explanation: The ARG argument is not supported for the specified request type and resource.
System action: The request is rejected.
User response: Correct the request and resubmit the job.
EQQY703E ONLY ONE OF THE ARGUMENTS FIRST, NEXT, PREV AND LAST IS ACCEPTED
Explanation: The ARGN parameter can contain only one of the codes mentioned in the message text.
System action: The request is rejected.
User response: Check that there is a blank entry indicating the end of the ARGN parameter. Correct the request
and resubmit the job.
EQQY704E ARGV ENTRY IS ZERO FOR ARGN VALUE ARG IN REQ REQUEST FOR RESOURCE RES
Explanation: The ARGN parameter indicates that there is a parameter with an associated value, but the
corresponding ARGP entry does not contain a valid data address.
System action: The request is rejected.
User response: Check that the ARGN and ARGP parameters have the corresponding entries assigned to them.
Correct the request and resubmit the job.
EQQY705E A LIST SELECT REQUEST WITHOUT A PRECEDING LIST REQUEST, RESOURCE IS RES
Explanation: The ARGN parameter indicates list select (one of the values FIRST, NEXT, PREV, and LAST is
specified), but there has been no preceding LIST request made for the resource RES.
System action: The request is rejected.
User response: Check that the proper RESOURCE is specified. If it is, precede SELECT by a LIST request.
Correct the request and resubmit the job.
EQQY706E A SELECT REQUEST WITH NO ARGN/ARGV SPECIFICATION, RESOURCE IS RES
Explanation: A SELECT request requires at least one selection parameter, but the ARGN parameter indicates that
there is none.
System action: The request is rejected.
User response: Check the ARGN and ARGP parameters. Correct the request and resubmit the job.

450

Tivoli OPC Messages and Codes

EQQY707E EQQY714E

EQQY707E A SELECT REQUEST WITH INCONSISTENT ARGN/ARGV SPECIFICATION, RESOURCE IS RES
Explanation: Tivoli OPC encountered one of the following problems:
A record area has been specified by the ARGN parameter in a SELECT request to hold the data for selection of a
record. The ARGN parameter also specifies additional selection items. This is not supported. A record area
must be the only selection item.
The STATUS argument or the TYPE argument has been specified twice in the ARGN parameter. This is not
supported. These arguments can be specified only once.
System action: The request is rejected.
User response: Check the ARGN and ARGP parameters. Correct the request and resubmit the job.
EQQY708E A SELECT REQUEST WITH MORE THAN ONE RECORD SELECTED, RESOURCE IS RES
Explanation: More than one record matches the selection criteria set up by the ARGN parameter or the ARGV
parameter, or both parameters.
System action: The request is rejected.
User response: Check the ARGN and ARGP parameters. Correct the request and resubmit the job.
EQQY709E AN ABEND OCCURRED IN THE PROGRAM INTERFACE FUNCTION, IT IS RESTARTED
Explanation: A serious error caused the program interface function to end in error.
System action: The program interface function resumes normal processing.
Problem determination: Review the dump dataset (ddname EQQDUMP) to determine the cause of the problem.
User response: See message EQQG004E.
EQQY711E THE RESOURCE RES IS NOT SUPPORTED FOR REQUEST REQ
Explanation: The combination of RES and REQ is not supported. REQ is a program interface request type. RES is
either a resource in the program interface call or the resource in a record header.
System action: The request is rejected.
User response: Check the REQ and RES parameters and the record header. Correct the request and resubmit the
job.
EQQY712E THE RESOURCE RES IS NOT SUPPORTED WHEN SELECTION FROM LIST
Explanation: The RES resource is not supported in a SELECT request to the program interface function.
System action: The request is rejected.
User response: Check the REQ and RES parameters. Correct the request and resubmit the job.
EQQY713E REQUIRED ARGUMENT ARG MISSING IN REQ REQUEST FOR RESOURCE RES
Explanation: The program interface request requires that a specific argument be present in the ARGN parameter or
the ARGV parameter, or both parameters, for the specified resource.
System action: Processing continues.
User response: Correct the program interface request.
EQQY714E THE DATA ADDRESS PARAMETER DATAP IS ZERO IN REQ REQUEST
Explanation: The REQ request requires that the data address parameter (DATAP) contains a valid address.
System action: The request is rejected.
User response: Check the DATAP parameter. Correct the request and resubmit the job.

Chapter 35. EQQYnnn Messages

451

EQQY715E EQQY722W

EQQY715E THE DATA ADDRESS PARAMETER DATAP MUST BE ZERO IN AN INSERT LTOC REQUEST
Explanation: When adding an application to the long-term plan, You cannot use the data address parameter
(DATAP) to supply an application description.
System action: The request is rejected.
User response: Do either of the following:
Add the application description to the model database before the INSERT LTOC request.
Use an existing application description and modify it after it is added by the INSERT LTOC request.

EQQY716E UNSUPPORTED HEADER RESOURCE HRES IN REQ STATEMENT, RESOURCE IS RES
Explanation: The record header contains an unsupported header resource.
System action: The request is rejected.
User response: Check the record header. Correct the request and resubmit the job.
EQQY717E NO COMMON SECTION HEADER RESOURCE HRES IN REQ STATEMENT
Explanation: The REQ request requires that the record header contains a resource for the common section of a
record.
System action: The request is rejected.
User response: Check the record header. Correct the request and resubmit the job.
EQQY718E COMMON SECTION HEADER RESOURCE HRES TWICE IN REQ STATEMENT
Explanation: The HRES resource can exist only once in the buffer header.
System action: The request is rejected.
User response: Check the record header. Correct the request and resubmit the job.
EQQY719E THE DATA ADDRESS PARAMETER DATAP IS NOT ZERO IN REQ REQUEST
Explanation: The REQ request requires that the data address parameter (DATAP) is set to zero.
System action: The request is rejected.
User response: Check the DATAP parameter. Correct the request and resubmit the job.
EQQY721W CONCURRENT UPDATE (REQ) OF RECORD WITH KEY KEY, UPDATE PERFORMED
Explanation: The record with key KEY has been updated by another function since it was read by the program
interface function.
System action: The update is performed.
User response: Check that this update did not cancel any additional update to be done to the record.
EQQY722W DELETE RECORD WITH KEY KEY NOT DONE, IS BEING UPDATED. RESOURCE IS RES
Explanation: The record with key KEY is being updated by another function.
System action: The delete is not performed.
User response: Check if the record should be deleted.

452

Tivoli OPC Messages and Codes

EQQY723W EQQY728E

EQQY723W DANGER OF CONCURRENT UPDATE TO RECORD WITH KEY KEY, UPDATE PERFORMED THE
DATA BASE RECORD WAS UPDATED AT UPDT BY USER
Explanation: The record with key KEY has been updated by another function since it was read by the program
interface function.
System action: The update is performed.
User response: Check that this update did not cancel any additional update to be done to the record.
EQQY724E INSERT OF RECORD WITH KEY KEY NOT DONE, EXISTS. RESOURCE IS RES
Explanation: The record cannot be inserted as it already exists.
System action: The insert is not performed.
User response: Check if the record needs to be updated. If replace is intended, use REPLACE instead of INSERT.
EQQY725E REPLACE OF RECORD WITH KEY NOT DONE, RECORD NOT FOUND. RESOURCES IS RES
Explanation: A REPLACE request is issued, but the record to be replaced does not exist.
System action: The replacement is not supported.
User response: Check if the record needs to be updated. If insert is intended, use INSERT instead of REPLACE.

| EQQY726E REQUEST REQ TO RESOURCE RES WITH KEY KEY FAILED. THE RECORD IS HELD FOR
|
UPDATE BY SOMEONE ELSE
Explanation: The request could not be handled as the record was already being updated by another dialog or
program interface user.
System action: Processing continues.
Problem determination: Check the data defined in the message using the Tivoli OPC dialog.
User response: Either use the Tivoli OPC dialog to perform the update or rerun the program interface program.

| EQQY727E REQUEST REQ TO RESOURCE RES WITH KEY KEY FAILED. AN ENQ ON THE KEY VALUE
|
FAILED WITH RETURN CODE RC
| Explanation: The ENQ MVS macro is issued via the program interface. The ENQ fails with a return code indicating
| an error: previous request for control of the same resource has been made for the same task.
| System action: The request is not performed.
| Problem determination: Check the meaning of the return code in the ENQ macro description.
| User response: Update the program interface application and rerun.
EQQY728E REQUEST REQ TO RESOURCE RES WITH KEY KEY FAILED. A DEQ ON THE KEY VALUE FAILED
WITH RETURN CODE RC
Explanation: The DEQ MVS macro is issued either due to a direct request via the program interface or a record
read, update or delete request. The DEQ fails with a return code indicating an error. A return code of 8 means that
the DEQ is made without a preceeding ENQ for the record by the same program interface user.
System action: Processing continues.
Problem determination: Check the meaning of the return code in the DEQ macro description.
User response: Update the program interface application and rerun.

Chapter 35. EQQYnnn Messages

453

EQQY729E EQQY734E

| EQQY729E CONCURRENT UPDATE (REQ) OF RECORD WITH KEY KEY, REQUEST REJECTED
| Explanation: The record with key KEY is being updated by another user.
| System action: The request is rejected.
| User response: Submit one program interface (PIF) program at a time to serialize update requests.
EQQY730E SELECT RES REQUIRES THE FULL KEY, FIELDS ADID, IA AND OPNO
Explanation: A JCL record is identified by its application ID, input arrival time (date and time), and operation
number. You cannot omit any of these fields in a SELECT JS or SELECT JSCOM request.
System action: The request is rejected.
User response: If you do not know the values for all of the identifier fields, issue a SELECT CPOPCOM request
before the SELECT request. If you want to get JCL from only the Tivoli OPC JCL repository, issue a LIST JSCOM
request before the SELECT request.
EQQY731E A REQ RES REQUEST IS RECEIVED, NO OCCURRENCE IS IDENTIFIED
Explanation: The program interface is called to update the details of an occurrence. No occurrence is identified.
System action: Processing continues.
User response: The occurrence details request must be preceded by a request identifying the occurrence, that is, a
request to MODIFY the resource CPOC with the occurrence identified by the argument names ADID and IA.
EQQY732E A REQ RES REQUEST IS RECEIVED, NO OPERATION IS IDENTIFIED
Explanation: The program interface is called to update the details of an operation. No operation is identified.
System action: Processing continues.
User response: The operation details request must be preceded by a request identifying the operation, that is, a
request to MODIFY the resource CPOP with the operation identified by the argument name OPNO.
EQQY733E INPUT DATA WHEN ADDING OCCURRENCE MUST BE AN AD, ARG IS NOT SUPPORTED
Explanation: The data address in a program interface call to insert an occurrence is not zero. The data address
should therefore locate an application description. A header defining the rest of the data area must come first in the
data area. The header to be located at the beginning of the data area does not start with a header entry for the
common part of an application description.
System action: Processing continues.
User response: Check that the area located by the data address starts with a correct header. If an existing
application description should be used, the ARGN parameter or the ARGP parameter, or both parameters, should be
used to identify the application description, and the data address must be zero.

| EQQY734E THE MAXIMUM 4 ACTIVE VERSIONS ALREADY EXIST
| Explanation: The program interface was called to insert a new version of an application description record among
| the existing versions, but four active versions were already existing in the application description dataset. No more
| active versions of the application are allowed.
| System action: The request is rejected.
| User response: Correct the program interface request to insert the application with a different Application ID or, if
| possible, with the status of the application set to pending.

454

Tivoli OPC Messages and Codes

EQQY735E EQQY803E

| EQQY735E THE MAXIMUM 4 PENDING VERSIONS ALREADY EXIST
| Explanation: The program interface was called to insert a new version of an application description record among
| the existing versions, but four pending versions were already existing in the application description dataset. No more
| pending versions of the application are allowed.
| System action: The request is rejected.
| User response: Correct the program interface request to insert the application with a different Application ID or, if
| possible, with the status of the application set to active.
EQQY738E A REQ RES REQUEST IS RECEIVED, NO WORK STATION IS IDENTIFIED.
Explanation: The program interface was called to modify the details open time interval data for a current plan
workstation. No current plan workstation was identified.
System action: The request is rejected.
User response: Identify the workstation by a MODIFY CPWS request before requesting to modify the open time
interval data.

| EQQY739E THIS VERSIONS VALID-FROM DATE CANNOT PRECEDE VALF
|
|
|
|

Explanation: The program interface tried to modify an application version validity period, making sure that all existing
versions would be back-to-back. When the valid-from date is changed to an earlier date and the application version
has an earlier version, the valid-from date must be greater than the valid-from date of the earliest version. Otherwise,
this version would be deleted by the back-to-back mechanism.

| System action: The request is rejected.
| User response: Check the valid-from date of the earlier version of the application, correct the program interface
| request and rerun.
EQQY801E FAILED TO WRITE REC RECORD WITH KEY: KEY
Explanation: A write record failed.
System action: The request is rejected.
User response: Check the message log for messages giving detailed information about the write error.
EQQY802E FAILED TO READ RECORD WITH KEY: KEY
Explanation: A read record failed.
System action: The request is rejected.
User response: Check the message log for messages giving detailed information about the read error.
EQQY803E AN EMPTY LIST WAS RETURNED AS THE RESULT OF A LIST REQUEST SELECTION VALUES
USED: KEY
Explanation: A list request was done to the Tivoli OPC subsystem, but no items were returned. This is either
because the selection argument in the request was too narrow or because you are not authorized to read the
requested data.
Note: Any dates that appear in the key value are displayed in the Tivoli OPC internal format, which is 72 years
before the actual date.
System action: Processing continues.
User response: Check the key value or obtain the correct authorization.

Chapter 35. EQQYnnn Messages

455

EQQY804W EQQY824E

EQQY804W YOU ARE NOT AUTHORIZED TO READ THE OI DATA BASE AD AND OI WERE NOT CHECKED
FOR CONSISTENCY
Explanation: During a consistency check between the application description (AD) and the operator instruction (OI)
databases, you have attempted to read the OI database, but you are not authorized.
System action: Processing continues.
User response: Obtain the correct authorization.
EQQY805W YOU ARE NOT AUTHORIZED TO UPDATE THE OI DATA BASE AD AND OI WERE NOT CHECKED
FOR CONSISTENCY
Explanation: During a consistency check between the application description (AD) and the operator instruction (OI)
databases, you have attempted to update the OI database, but you are not authorized.
System action: Processing continues.
User response: Obtain the correct authorization.
EQQY821E CURRENT PLAN WORK STATION WS TO BE MODIFIED DOES NOT EXIST
Explanation: The current plan workstation WS that is to be modified does not exist.
System action: Processing continues.
User response: Check the program interface call identifying the workstation that is to be modified. Modify the
ARGN parameter or the ARGP parameter, or both parameters, by adding the name of the correct current plan
workstation.
EQQY822E CURRENT PLAN OCCURRENCE TO BE MODIFIED DOES NOT EXIST APPLICATION ID: ID, INPUT
ARRIVAL TIME: IA
Explanation: The current plan occurrence that is to be modified does not exist.
System action: Processing continues.
User response: Check the program interface call identifying the occurrence that is to be modified. Modify the ARGN
parameter or the ARGP parameter, or both parameters, by adding the application ID and input arrival date and time of
the correct current plan occurrence.
EQQY823E CURRENT PLAN OPERATION OP TO BE MODIFIED DOES NOT EXIST APPLICATION ID: ID, INPUT
ARRIVAL TIME: IA
Explanation: The current plan operation OP that is to be modified does not exist in the specified occurrence.
System action: Processing continues.
User response: Check the program interface call identifying the occurrence and the operation that is to be modified.
There must be a MODIFY CPOC request identifying the occurrence. Modify the ARGN parameter or the ARGP
parameter, or both parameters, by adding the application ID and the input arrival date and time of the correct
occurrence. Following the MODIFY CPOC request, there must be a MODIFY CPOP request identifying the operation.
Modify the ARGN parameter or the ARGP parameter, or both parameters, by adding the correct operation number.
EQQY824E CURRENT PLAN OPERATION OP TO BE ADDED DOES ALREADY EXIST APPLICATION ID: ID,
INPUT ARRIVAL TIME: IA
Explanation: The current plan operation OP that is to be added already exists.
System action: Processing continues.
User response: Use the Tivoli OPC dialog to check the occurrence defined in the message. Correct the program
interface request and rerun it.

456

Tivoli OPC Messages and Codes

EQQY825E EQQY832W

EQQY825E CHANGE STATUS OF OCCURRENCE TO STAT IS NOT SUPPORTED
Explanation: Changing the status of an occurrence in the current plan to STAT is invalid.
System action: Processing continues.
User response: Check that the status change supplied in the status argument of the CPOC call is either W (Waiting)
or C (Complete).
EQQY826E CURRENT PLAN OCCURRENCE TO BE MODIFIED ALREADY ALTERED. APPLICATION ID: ID,
INPUT ARRIVAL TIME: IA.
Explanation: The program interface does not let you modify or delete a current plan occurrence that you have
already modified or deleted since the last Execute request.
It is recommended that you issue the Execute request every time you modify or delete a current plan occurrence.
System action: The MODIFY CPOC or DELETE CPOC request is rejected.
User response: Correct the program and rerun it.
EQQY827E CURRENT PLAN WORKSTATION WS TO BE MODIFIED ALREADY MODIFIED
Explanation: The program interface does not let you modify a workstation that you have already modified since the
last Execute request.
System action: The MODIFY CPWS request is rejected.
User response: Correct the program request and rerun it.
EQQY830I THE REQUEST IS REQUEST RESOURCE, OCCURRENCE LTOC
Explanation: A program interface request for a long-term plan is identified by:
The request type
One of the long-term plan resources
The key of the occurrence that is being inserted, deleted, or updated.
System action: None.
User response: None.
EQQY832W UNRESOLVED DEPENDENCY
Explanation: There are two possibilities:
You were adding an occurrence to the long-term plan, using automatic dependency resolution.
You were adding a predecessor to an existing occurrence in the long-term plan.
A predecessor could not be resolved because the predecessor application does not have an occurrence with an
earlier start time or the same start time.
System action: None.
Problem determination: This message is followed by message EQQY830I, which identifies the inserted or updated
occurrence of the long-term plan.
User response: Use the Tivoli OPC dialog to display the occurrence and to find out which dependency is missing.

Chapter 35. EQQYnnn Messages

457

EQQY833E EQQY901E

EQQY833E FAILED TO DELETE PREDECESSOR SPECIFICATION, STORAGE ALLOCATION FAILED
Explanation: There are two possibilities:
You were deleting an occurrence from the long-term plan.
You were deleting a predecessor from an existing occurrence in the long-term plan.
The occurrence could not be deleted because of a storage allocation problem.
System action: None.
Problem determination: This message is followed by message EQQY830I, which identifies the deleted or updated
occurrence in the long-term plan.
User response: Repeat the request.
EQQY834E FAILED TO ADD PREDECESSOR LTPDERR
Explanation: There are two possibilities:
You were adding an occurrence to the long-term plan.
You were adding a predecessor to an existing occurrence in the long-term plan.
The occurrence could not be added because of an I/O error.
System action: None.
Problem determination: This message is followed by message EQQY830I, which identifies the inserted or updated
occurrence of the long-term plan.
User response: Look in the message log of the Tivoli OPC subsystem for an error message that gives more
information about the cause of the error.
EQQY835E FAILED TO DELETE DEPENDENCY LTPDERR
Explanation: There are two possibilities:
You were deleting an occurrence from the long-term plan.
You were deleting a predecessor from an existing occurrence in the long-term plan.
The occurrence could not be deleted because of an I/O error.
System action: None.
Problem determination: This message is followed by message EQQY830I, which identifies the deleted or updated
occurrence in the long-term plan.
User response: Look in the message log of the Tivoli OPC subsystem for an error message that gives more
information about the cause of the error.
EQQY900E THE VARIABLE TABLE NAME JCLVCTAB IS INVALID
Explanation: A JCL variable table name must:
Consist of 1 through 8 alphanumeric characters
Begin with an alphabetic character.
System action: None.
User response: Correct the JCL variable table name.
EQQY901E THE FIELD FIELD IN TABLE JCLVCTAB IS INVALID
Explanation: A field in a table has an invalid format.
System action: None.
User response: Correct the field.

458

Tivoli OPC Messages and Codes

EQQY902E EQQY906E

EQQY902E THE FIELD FIELD IN TABLE JCLVCTAB IN VARIABLE VARNAME IS INVALID
Explanation: A field in a variable in a table has an invalid format.
System action: None.
User response: Correct the field.
EQQY903E THE VARIABLE VARNAME IN TABLE JCLVCTAB HAS A LENGTH GREATER THAN 32K
Explanation: A single variable definition cannot exceed 32 KB (kilobytes).
System action: None.
User response: Reduce the size of your variable definition.
EQQY904E THE PIFHD KEYWORD HAS NOT BEEN DEFINED IN THE SUBSYSTEM PARMS.
Explanation: The INTFOPTS initialization statement keyword PIFHD is required. It has not been defined.
System action: The program interface application is terminated without further processing.
User response: Define the PIFHD keyword in the initialization statement member for the subsystem and restart the
subsystem.
EQQY905E THE NUMBER OF TEXT ROWS IN A JS RECORD, JSLINES, MUST NOT BE 0
Explanation: You are trying to insert or replace a JS record that contains no text rows. The value of JSLINES must
be greater than 0.
System action: The JS record is not inserted.
System programmer response: Delete the whole JS record or insert at least one text row into the JS record.
EQQY906E FAILED TO READ RECORD TO UPDATE, TYPE: REC, KEY: KEY
System action: The request to write the record is rejected.
User response: Make sure that the record to be modified exists. If you cannot find a valid reason for the error,
contact your system programmer.

Chapter 35. EQQYnnn Messages

459

460

Tivoli OPC Messages and Codes

EQQZ000I EQQZ006I

Chapter 36. EQQZnnn Messages
EQQZ000I A STOP OPC COMMAND HAS BEEN RECEIVED
Explanation: The Tivoli OPC started task has received an operator stop command.
System action: Tivoli OPC posts all active subtasks for termination and terminates when all subtasks have
terminated.
EQQZ001E JES IS NOT ACTIVE. OPC CANNOT START
Explanation: The Tivoli OPC subsystem could not start because no primary JES subsystem is active.
System action: The subsystem task module, EQQMAJOR, is terminated.
System programmer response: Wait for JES to start and reissue the start command.
EQQZ002E THE OPC SUBSYSTEM IS ALREADY ACTIVE. IT CANNOT START AGAIN
Explanation: An operator START command has been entered for a Tivoli OPC subsystem that is already active.
System action: The second attempt to invoke Tivoli OPC is terminated.
System programmer response: If you want to restart the Tivoli OPC subsystem, stop it and issue the START
command.
EQQZ003E INVALID OPC JOBNAME JOBNAME. NAME MUST BE 4 CHARACTERS OR LESS
Explanation: The Tivoli OPC subsystem task module, EQQMAJOR, has been incorrectly invoked.
System action: The EQQMAJOR module is terminated.
System programmer response: Change the name of the Tivoli OPC subsystem started task to one of the
subsystem names defined in SYS1.PARMLIB and reissue the start command.
EQQZ004E UNABLE TO ATTACH OPC SUBTASK SUBTASK
Explanation: An error occurred when the Tivoli OPC subsystem attempted to attach the subtask SUBTASK.
System action: Tivoli OPC continues processing.
Problem determination: Review earlier messages in the Tivoli OPC message log and SYSLOG datasets to
determine the exact reason for this message. One possibility is that Tivoli OPC is being started in a region that is too
small.
System programmer response: Correct all errors and restart Tivoli OPC.
EQQZ005I OPC SUBTASK SUBTASK IS BEING STARTED
Explanation: The Tivoli OPC subsystem has successfully attached the subtask SUBTASK.
System action: Tivoli OPC continues processing. If the startup process is successful, the subtask issues its own
start message.
EQQZ006I NO ACTIVE OPC SUBTASKS. OPC IS ENDING
Explanation: All Tivoli OPC subtasks have terminated. The Tivoli OPC subsystem is about to enter its own
termination process.
System action: The Tivoli OPC subsystem frees all acquired resources and is terminated.

 Copyright IBM Corp. 1991, 1999

461

EQQZ007E EQQZ012E

EQQZ007E OPC JOBNAME JOBNAME IS NOT A VALID SUBSYSTEM NAME
Explanation: The Tivoli OPC subsystem task module, EQQMAJOR, has been incorrectly invoked.
System action: The EQQMAJOR module is terminated.
System programmer response: Change the name of the Tivoli OPC subsystem started task to one of the
subsystem names defined in SYS1.PARMLIB and reissue the start command.
EQQZ008E THE OPC INITIALIZATION PROGRAM, EQQINITC, HAS NOT BEEN SUCCESSFULLY EXECUTED.
THE OPC SUBSYSTEM IS UNABLE TO START
Explanation: The Tivoli OPC subsystem could not start because the required CSA resident control blocks could not
be located or were invalid. These control blocks are built during IPL by the EQQINITD program.
System action: Processing continues.
Problem determination: Check that the currently active IEFSSNxx member of SYS1.PARMLIB defines the Tivoli
OPC subsystem correctly. Check also that EQQINITD is present in SYS1.LINKLIB or in a library in the LNKLSTxx
concatenation of libraries. Review the master console messages issued during IPL.
System programmer response: Correct all errors and restart Tivoli OPC after an IPL of the MVS system.
EQQZ010E MEMBER MEMBER CANNOT BE FOUND IN PARAMETER LIBRARY
Explanation: The parameter library member MEMBER could not be found in the library defined by the EQQPARM
DD statement.
System action: The Tivoli OPC subtask that issues this message is terminated.
Problem determination: Check that the EQQPARM DD statement is correctly defined. Check also that the
OPCOPTS initialization statement is correctly defined.
System programmer response: Correct all errors and restart the failing subtask.
EQQZ011E PARAMETER LIBRARY MEMBER MEMBER IS EMPTY
Explanation: There are two possibilities:
The parameter library member MEMBER exists in the library defined by the EQQPARM DD statement, but there
are no records in the member.
When running EQQEVPGM, the dataset referenced by the SYSIN DD statement is empty.
System action: The Tivoli OPC subtask that issues this message is terminated.
Problem determination: Check that the EQQPARM DD statement is correctly defined, or, when using EQQEVPGM,
that the SYSIN DD statement uses the correct dataset name. Check also that the OPCOPTS initialization statement
is correctly defined.
System programmer response: Correct all errors and restart the failing subtask.
EQQZ012E I/O ERROR READING PARAMETER LIBRARY MEMBER MEMBER
Explanation: The parameter library member MEMBER could not be read from the library defined by the EQQPARM
DD statement.
System action: The Tivoli OPC subtask that issues this message is terminated.
Problem determination: Review earlier messages in the Tivoli OPC message log to determine the exact reason for
this message.
System programmer response: Correct all errors and restart the failing subtask.

462

Tivoli OPC Messages and Codes

EQQZ013I EQQZ019E

EQQZ013I NOW PROCESSING PARAMETER LIBRARY MEMBER MEMBER
Explanation: A Tivoli OPC subtask has started processing the parameter library member MEMBER.
System action: Tivoli OPC processing continues.
System programmer response: None.
EQQZ014I MAXIMUM RETURN CODE FOR PARAMETER MEMBER MEMBER IS: MAXCC
Explanation: A Tivoli OPC subtask has finished processing the parameter library member MEMBER. MAXCC is the
maximum return code encountered for Tivoli OPC initialization statements in the member.
System action: If the maximum return code is not zero, the Tivoli OPC subtask that issues this message is
terminated.
System programmer response: Correct any initialization errors and, if necessary, restart any failing subtask.
EQQZ015I INIT STATEMENT: CARD
Explanation: A Tivoli OPC subtask that is processing a parameter library member prints the entire member using
this message.
System action: Tivoli OPC processing continues.
System programmer response: None.
EQQZ016I RETURN CODE FOR THIS STATEMENT IS: MAXCC
Explanation: A Tivoli OPC subtask has finished processing an initialization statement. MAXCC is the return code
sent by the subtask. It indicates if the statement was successfully processed.
System action: The Tivoli OPC subtask continues processing initialization statements.
System programmer response: If the return code is not zero, correct all initialization statement errors. If
necessary, restart the subtask.
EQQZ017E RESOURCE NAME SPECIFIED, RESNAME, IS NOT RECOGNIZED
Explanation: An error has been found while processing the SUBRESOURCES keyword in the AUTHDEF statement.
System action: Tivoli OPC initialization fails.
System programmer response: Change the list of resource names in the SUBRESOURCES keyword to include
only valid resource names.
EQQZ018E INITIALIZATION STATEMENT SPECIFICATION IS LONGER THAN 455 RECORDS
Explanation: An initialization statement cannot exceed 455 input records.
System action: Tivoli OPC initialization fails.
System programmer response: Reduce the total number of records in the statement by entering as many keywords
and keyword values per record as possible. You can abbreviate any keyword and can use up to 72 characters of
each 80-character record for your specification. For more information, refer to Tivoli OPC Customization and Tuning.

| EQQZ019E DB2 MODULE DB2MOD LOAD FAILED
| Explanation: The DB2 module DB2MOD failed to load during Tivoli OPC startup.
System action: Tivoli OPC is stopped.
System programmer response: Check the reason for the failure and correct the problem.

Chapter 36. EQQZnnn Messages

463

EQQZ021E EQQZ028E

| EQQZ021E A CLASS SPECIFIED IN THE CATMDISP KEYWORD DOES NOT MATCH ANY OF THE CLASSES IN
|
THE CATMCLAS KEYWORD
| Explanation: Message class SYSOUT in an original held class is requeued by catalog management to the
| corresponding new held SYSOUT class specified in the CATMDISP keyword, but Tivoli OPC does not find the original
| SYSOUT class in the set of classes specified in the CATMCLAS statement.
| System action: Tivoli OPC is terminated.
| System programmer response: Include the original SYSOUT class value in the initialization statement of
| CATMCLAS OPC.
EQQZ022W THE SSCM LOAD MODULE SPECIFIED, SSCM, COULD NOT BE LOADED
Explanation: The module name specified in the SSCMNAME parameter of the OPCOPTS initialization statement
could not be found.
System action: Initialization continues, using the EQQSSCMD module defined by IEFSSNxx for Tivoli OPC event
generation.
System programmer response: Check that the module name specified in SSCMNAME is correct and that the
module is contained in an APF-authorized library, accessible to Tivoli OPC either by the STEPLIB DD statement or by
the LNKLSTxx concatenation.
EQQZ023W THE SSCMNAME LOAD MODULE SPECIFIED, SSCM, IS NOT VALID FOR OPC
Explanation: A module name specified in an SSCMNAME keyword on an OPCOPTS initialization statement is not
valid.
System action: The Tivoli OPC subsystem continues to create event records using the EQQSSCMx module that
was loaded during IPL.
System programmer response: Specify a valid Tivoli OPC event creation routine.
EQQZ024I BEXTXT
Explanation: This message contains output from the Tivoli OPC internal diagnostic routines.
System action: Tivoli OPC continues normal processing.
System programmer response: None.
EQQZ025E THE OPC SUBSYSTEM SSNAME IS USING AN INVALID EQQSSCM MODULE
Explanation: The event creation module, EQQSSCMx, used by the subsystem named in the message is not valid
for Tivoli OPC. This error was discovered during system IPL.
System action: The IPL continues. The subsystem named in the message is active, but the tracking event that it
creates is not reliable.
System programmer response: Verify that the correct EQQSSCMx module is accessible to the operating system
during the IPL. Check that the SYS1.PARMLIB member IEFSSNxx is correctly updated.
For more information, refer to Tivoli OPC Installation Guide.
EQQZ028E THE ACTION CHARACTER OF ONE OR MORE OF THE CATMDISP VALUES IS INCORRECT
Explanation: You have specified an invalid action for a message class in the CATMDISP keyword. The only valid
value is Q.
System action: Tivoli OPC is terminated.
User response: Correct the CATMDISP values and restart Tivoli OPC.

464

Tivoli OPC Messages and Codes

EQQZ029E EQQZ034I

EQQZ029E INVALID COMBINATION OF ACTION AND NEW CLASS IN THE CATMDISP KEYWORD
Explanation: You have specified an invalid combination for the action character and the new class section of the
CATMDISP keyword value. A new class must be specified when the action character is Q, meaning that the output is
to be requeued to a different class.
System action: Tivoli OPC is terminated.
User response: Correct the CATMDISP value and restart Tivoli OPC.
EQQZ030E OPC WAS UNABLE TO OPEN THE MESSAGE LOG DATA SET
Explanation: Tivoli OPC cannot open its message log dataset.
System action: The subsystem task module, EQQMAJOR, is terminated.
Problem determination: Check that the EQQMLOG DD statement exists and is correctly coded. Verify that the
subsystem started task is authorized to update the message log dataset.
System programmer response: Correct the errors and reissue the start command.
EQQZ031E OPC WAS UNABLE TO OPEN THE MESSAGE LIBRARY FILE
Explanation: Tivoli OPC cannot open its message library dataset.
System action: The subsystem task module, EQQMAJOR, is terminated.
Problem determination: Check that the EQQMLIB DD statement exists and is correctly coded. Verify that the
subsystem started task is authorized to read the message library dataset.
System programmer response: Correct the errors and reissue the start command.
EQQZ032E SIZE OF OPC MESSAGE LIBRARY RECORDS MUST BE 80 BYTES
Explanation: Tivoli OPC cannot use its message library dataset because the dataset does not contain message
records of 80 bytes.
System action: The subsystem task module, EQQMAJOR, is terminated.
Problem determination: Check that the EQQMLIB DD statement is correctly coded.
System programmer response: Correct the errors and reissue the start command.
EQQZ033E OPC IS ENDING. MESSAGE ROUTINE COULD NOT BE INITIALIZED
Explanation: Tivoli OPC cannot initialize its message services.
System action: The subsystem task module, EQQMAJOR, is terminated.
Problem determination: Check the previous WTO messages from this subsystem.
System programmer response: Correct the errors and reissue the start command.
EQQZ034I OPC SUBTASK SUBTASK HAS ENDED. SUBTASK WAS ACTIVE ACTIVE SECONDS AND USED
CPUT CPU SECONDS
Explanation: A Tivoli OPC subtask has ended after being requested to stop processing. This message documents
how long the subtask was active and how much CPU time it used.
System action: Tivoli OPC continues normal processing.
System programmer response: None.

Chapter 36. EQQZnnn Messages

465

EQQZ035E EQQZ038E

EQQZ035E MAXIMUM QUEUE SIZE (MAXNUM) WAS REACHED ON THE QNAME QUEUE. NUMLOST EVENTS
HAVE BEEN LOST
Explanation: A Tivoli OPC queue has reached its maximum size and a number of events could not be added. The
most likely reason is that Tivoli OPC has been inactive (not started) for some time and more job tracking events have
occurred than could fit into the ECSA buffers available to this Tivoli OPC subsystem.

QNAME can be one of the following:
WTRQ
JCCQ
MGRQ
GENQ
MSGQ
RTRQ
NCFQ
SUBQ

The
The
The
The
The
The
The
The

event writer queue
job completion checker queue
event manager queue
general service task queue
Tivoli OPC message queue
data router queue
NCF queue
submit queue

System action: Tivoli OPC continues processing.
Problem determination: This message is sometimes issued for the WTRQ of a test Tivoli OPC system that is
started only infrequently. If the message is issued for a production system, the error may be caused by an unusually
long delay in starting Tivoli OPC or by insufficient ECSA storage for Tivoli OPC event buffering.
System programmer response: If the message is issued for the WTRQ of a production Tivoli OPC subsystem that
is being started during IPL, increase the maximum ECSA space for event buffering by changing the definition of the
subsystem in SYS1.PARMLIB. If the message is issued for a queue other than WTRQ, contact your IBM
representative.
EQQZ036E ERROR RETRIEVING INFORMATION FOR DDNAME = DDNAME DYNALLOC RETCODE = RC, INFO
CODE = INFO, REASON CODE = RSN
Explanation: Tivoli OPC tried to retrieve information from the definition of a Tivoli OPC ddname, but failed.
System action: The task issuing this message is terminated.
Problem determination: Use the DYNALLOC return code and reason code to determine the cause of the error. For
more information, refer to the appropriate DYNALLOC documentation for the currently active MVS/ESA system.
System programmer response: Correct the error and restart the Tivoli OPC subsystem.
EQQZ037E A REQUIRED DD-CARD IS MISSING. DDNAME = DDNAME
Explanation: An EQQMLOG, EQQCKPT, EQQCP1DS, or EQQJT1DS DD statement is needed, to start Tivoli OPC
in the manner defined by the current input parameter statements.
System action: If the EQQMLOG DD statement is missing, the subsystem task module, EQQMAJOR, is terminated.
If one of the other DD statements is missing, the normal mode manager subtask is terminated.
System programmer response: Add the missing DD statement to the started task procedure and restart the Tivoli
OPC subsystem.
EQQZ038E TWO OPC SYSTEMS CANNOT USE THE SAME MESSAGE LOG DATA SET
Explanation: You tried to start a Tivoli OPC subsystem or batch job that does not have an EQQMLOG DD
statement or the message log dataset is being used by another Tivoli OPC subsystem or batch job.
System action: The subsystem or batch job is terminated.
System programmer response: Change the definition of the EQQMLOG DD statement and restart the Tivoli OPC
subsystem or batch job. If the message is issued for a program interface job, give the failing INIT request a unique
message log ddname. Use the MLOGDDN argument.

466

Tivoli OPC Messages and Codes

EQQZ039E EQQZ044E

EQQZ039E DATA SET CONFLICT. THE DATA SET DEFINED BY DDNAME DDNAME IS USED BY ANOTHER
OPC SYSTEM. DSNAME IS DSNAME
Explanation: You tried to start a Tivoli OPC subsystem using an output dataset that is being used by another Tivoli
OPC subsystem.
System action: The subsystem is terminated.
System programmer response: Change the definition of the DD statement and restart the Tivoli OPC subsystem.
EQQZ040E NCF APPLICATION NAME IS REQUIRED WHEN NCFTASK(YES) IS SPECIFIED
Explanation: The NCFAPPL keyword is required, because you specified NCFTASK(YES) in the OPCOPTS
initialization statement.
System action: The subsystem is terminated.
System programmer response: Add the NCFAPPL keyword to the OPCOPTS statement and restart the Tivoli OPC
subsystem.
EQQZ041E THE ERDRTASK KEYWORD SPECIFIES A VALUE THAT IS NOT IN THE RANGE 0 - 16
Explanation: The ERDRTASK keyword on the OPCOPTS initialization statement specifies an invalid value.
System action: Tivoli OPC initialization fails.
System programmer response: Change the ERDRTASK value to a number within the range 0–16 and restart Tivoli
OPC.
EQQZ042E ONE OR MORE EVENT READER MEMBER NAMES ARE NOT DEFINED
Explanation: The ERDRPARM keyword on the OPCOPTS initialization statement does not define enough member
names. The number of member names must be equal to the number of reader tasks to be started. This number is
defined by the ERDRTASK keyword.
System action: Tivoli OPC initialization fails.
System programmer response: Change the ERDRTASK value or the number of names in the ERDRPARM list and
restart Tivoli OPC.
EQQZ043E DUPLICATE NAMES IN THE EVENT READER MEMBER NAME LIST
Explanation: The ERDRPARM keyword on the OPCOPTS initialization statement specifies the same member name
more than once.
System action: Tivoli OPC initialization fails.
System programmer response: Change the ERDRPARM member name list so that all names are specified only
once and restart Tivoli OPC.
EQQZ044E TOO MANY NAMES IN THE EVENT READER MEMBER NAME LIST
Explanation: The ERDRPARM keyword on the OPCOPTS initialization statement defines too many member names.
The number of member names must be equal to the number of reader tasks to be started. This number is defined by
the ERDRTASK keyword.
System action: Tivoli OPC initialization fails.
System programmer response: Change the ERDRTASK value or the number of names in the ERDRPARM list and
restart Tivoli OPC.

Chapter 36. EQQZnnn Messages

467

EQQZ045W EQQZ051E

EQQZ045W OPC SUBTASK SUBTASK ENDED UNEXPECTEDLY
Explanation: A Tivoli OPC subtask ended without having been requested to terminate.
System action: Tivoli OPC processing continues.
Problem determination: Review earlier messages in the Tivoli OPC message log to determine the exact reason for
this message. Check if a dump has been created on any dump dataset allocated to the Tivoli OPC started task.
Operator response: If necessary, use a Tivoli OPC Modify command to restart the failing task.
EQQZ047E THE GSTASK KEYWORD SPECIFIES A VALUE THAT IS NOT IN THE RANGE 1 - 5
Explanation: The GSTASK keyword in the OPCOPTS initialization statement specifies an invalid value.
System action: Tivoli OPC initialization fails.
System programmer response: Change the GSTASK value to a number within the range 1–5 and restart Tivoli
OPC.
EQQZ048I AN OPC MODIFY COMMAND HAS BEEN PROCESSED. MODIFY SSNAME,FPARAM
Explanation: A Tivoli OPC modify command has been processed successfully.
System action: Tivoli OPC processing continues.
System programmer response: None.
EQQZ049W AN INCORRECT OPC MODIFY COMMAND HAS BEEN IGNORED. MODIFY SSNAME,FPARAM
Explanation: A Tivoli OPC Modify command could not be processed because parameters on the modify command
could not be recognized or they are inappropriate.
System action: The incorrect command is ignored. Tivoli OPC processing continues.
Problem determination: Check that the syntax of the Modify command is correct. If it is correct, you probably have
attempted to start a function that is already active or to stop a function that is not active.
Operator response: Change the Modify command and reissue it.
EQQZ050W THE OPC SUBSYSTEM HAS BEEN CANCELLED
Explanation: An operator cancel command has been received.
System action: Tivoli OPC terminates without waiting for subtasks to end.
System programmer response: None.
EQQZ051E THE OPC SUBSYSTEM MOTHER TASK HAS ABENDED
Explanation: A severe error has occurred in the Tivoli OPC subsystem task.
System action: Tivoli OPC terminates without waiting for subtasks to end. If a dump dataset is allocated, a dump is
created.
Problem determination: Review earlier messages in the Tivoli OPC message log dataset, SYSLOG dataset, and
the dump dataset to determine what caused the subsystem to abend.
System programmer response: Save the message log dataset containing this error message, the dump dataset,
and the SYSLOG dataset. Contact your IBM representative.

468

Tivoli OPC Messages and Codes

EQQZ052E EQQZ061E

EQQZ052E THE OPC PARAMETER LIBRARY FILE, DDNAME = EQQPARM, COULD NOT BE OPENED
Explanation: Tivoli OPC could not open the parameter library file, ddname EQQPARM, which is a required input
dataset for Tivoli OPC.
System action: Tivoli OPC is terminated. Message EQQZ054E is issued.
System programmer response: Check that ddname EQQPARM is correctly specified and that the Tivoli OPC
started task is authorized to open the dataset for input. Correct all errors and restart Tivoli OPC.
EQQZ053E LOGICAL RECORD SIZE FOR THE PARAMETER LIBRARY, DDNAME EQQPARM, IS NOT VALID
Explanation: Tivoli OPC cannot use the parameter library dataset, ddname EQQPARM, because its logical record
length is not 80 bytes.
System action: Tivoli OPC is terminated. Message EQQZ054E is issued.
System programmer response: Check that EQQPARM is correctly defined. Correct all errors and restart Tivoli
OPC.
EQQZ054E ERRORS ENCOUNTERED PROCESSING OPC PARAMETERS. OPC IS ENDING
Explanation: Tivoli OPC found one or more errors while processing its initialization member.
System action: Tivoli OPC initialization fails.
System programmer response: Correct all errors and restart Tivoli OPC.
EQQZ055E THE OPC INTERNAL READER FILE, DDNAME = EQQBRDS, COULD NOT BE OPENED
Explanation: Tivoli OPC could not open the internal reader dataset.
System action: Tivoli OPC is terminated. Message EQQZ054E is issued.
System programmer response: Check that ddname EQQBRDS is correctly specified. Correct all errors and restart
Tivoli OPC.
EQQZ058E THE BEX INTERFACE MODULE, EQQBEX, COULD NOT BE LOADED
Explanation: Tivoli OPC could not locate the Tivoli OPC service routine interface load module EQQBEX.
System action: Normal mode manager (NMM) initialization fails.
System programmer response: Make sure that the EQQBEX load module is present in a library that can be
reached by Tivoli OPC and restart the NMM.
EQQZ060E THE SYSOUTDISP VALUE, DISP, IS NOT RECOGNIZED
Explanation: The first character of the SYSOUTDISP value is not one of the four valid characters: blank, H, R, or D.
System action: The job-completion checker initialization fails.
System programmer response: Change the SYSOUTDISP value and restart the job-completion checker.
EQQZ061E THE INCDSN VALUE MUST NOT CONTAIN A MEMBER NAME. THE FILE MUST BE SEQUENTIAL
Explanation: The INCDSN keyword on the JCCOPTS initialization statement must specify the name of a sequential,
cataloged, disk resident dataset.
System action: The job-completion checker initialization fails.
System programmer response: Change the INCDSN value and restart the job-completion checker.

Chapter 36. EQQZnnn Messages

469

EQQZ062W EQQZ068E

EQQZ062W THE OPC START/STOP USER EXIT MODULE COULD NOT BE LOADED
Explanation: Tivoli OPC could not locate the subsystem start/stop exit load module EQQUX000.
System action: The subsystem start/stop exit is not used by Tivoli OPC.
System programmer response: If the subsystem start/stop exit is meant to be used, make sure that the
EQQUX000 load module is present in a library that can be reached by Tivoli OPC. Restart the Tivoli OPC started
task.
EQQZ063E THE COMBINATION JCCTASK(YES) AND EWTRTASK(NO) IS NOT SUPPORTED
Explanation: The job-completion checker can only be started when the event writer is also started.
System action: Tivoli OPC initialization fails.
System programmer response: Correct all errors and restart Tivoli OPC.
EQQZ064I OPC WILL USE THE NJE NODE NAME NJENODE FOR JOBS HELD ON THIS NODE
Explanation: During initialization of the event writer, HOLDJOB(YES) or HOLDJOB(USER) was encountered. This
message displays the name of the network job entry (NJE) node that Tivoli OPC uses for reader events created on
this node.
System action: Tivoli OPC processing continues.
System programmer response: Check that the NJE node name is correct. If the NJE node name is not correct,
check the installation of the JES2 EXIT7 or the JES3 IATUX29, as appropriate. If the shipped EQQEXIT macro has
been user-modified, make sure that it does not prevent or filter the tracking of Tivoli OPC itself.
EQQZ065I OPC WILL RELEASE HELD JOBS USING THE JES2 COMMAND CHARACTER CMDCHAR
Explanation: During initialization of the event writer, HOLDJOB(JES) or HOLDJOB(USER) was encountered. This
message displays the JES command character that Tivoli OPC uses to release JES2 jobs from hold.
System action: Tivoli OPC processing continues.
System programmer response: Check that the correct command character is displayed. If the command character
is not correct, check the installation of the JES2 EXIT7. If the shipped EQQEXIT macro has been user-modified,
make sure that it does not prevent or filter the tracking of Tivoli OPC itself.
EQQZ066W OPC HAS NOT BEEN ABLE TO DETERMINE THE JES TYPE. JES3 IS ASSUMED.
Explanation: Tivoli OPC could not determine whether it is running on a JES2 or a JES3 system. NJENODE is the
name of this network job entry (NJE) node.
System action: Processing continues. A JES3 system is assumed.
System programmer response: Check the installation of the JES2 EXIT7 or JES3 IATUX29, as appropriate. If the
shipped EQQEXIT macro has been user-modified, make sure that it does not prevent or filter the tracking of Tivoli
OPC itself.
EQQZ067E COMMAND SYNTAX ERROR: CARD FURTHER STATEMENT PROCESSING STOPPED
Explanation: The statement contains a syntactically incorrect command.
System action: No more statements are processed. The program is terminated with a return code of 8.
User response: Correct the error.
EQQZ068E CMD IS AN UNKNOWN COMMAND AND WILL NOT BE PROCESSED FURTHER STATEMENT
PROCESSING IS STOPPED
Explanation: Tivoli OPC has detected an unknown command in this statement.
System action: No more statements are processed. The program is terminated with a return code of 8.
User response: Correct the error.

470

Tivoli OPC Messages and Codes

EQQZ069W EQQZ073I

| EQQZ069W EQQSDUMP DDNAME IS MISSING
| Explanation: The subsystem job-step task could not find the ddname EQQSDUMP in the JCL.
| System action: The subsystem job-step task sends any dump triggered on a message number to the SYS1.DUMP
| datasets.
| Problem determination: Check if your customization of Tivoli OPC involves sending message triggered dumps to
| SYS1.DUMP datasets.
| System programmer response: If necessary, include the ddname EQQSDUMP in the Tivoli OPC started-task
| procedure, and restart Tivoli OPC.
| User response: None
| Tivoli OPC administrator response: None
| Operator response: None
EQQZ070E THE SSCMNAME KEYWORD SPECIFIES AN OPTION THAT IS NOT RECOGNIZED
Explanation: The SSCMNAME keyword on the OPCOPTS initialization statement specifies a load option that is not
supported.
System action: Tivoli OPC initialization fails.
System programmer response: Change the SSCMNAME option to one of the supported values, TEMPORARY or
PERMANENT, or remove the currently specified value to let the option default, and restart Tivoli OPC.
EQQZ071E OPTION PERMANENT FOR THE SSCMNAME KEYWORD REQUIRES THE BUILDSSX KEYWORD
Explanation: The SSCMNAME keyword on the OPCOPTS initialization statement specifies the PERMANENT load
option. This is supported only when the BUILDSSX keyword has been specified.
System action: Tivoli OPC initialization fails.
System programmer response: Add the BUILDSSX keyword to the OPCOPTS initialization statement and restart
Tivoli OPC.
EQQZ072W OPTION PERMANENT FOR THE SSCMNAME KEYWORD REQUIRES STEPLIB DD-STATEMENT
Explanation: The SSCMNAME keyword on the OPCOPTS initialization statement specifies the PERMANENT load
option. This is supported only when a STEPLIB DD statement has been defined.
System action: Tivoli OPC starts without loading the SSCM module permanently.
System programmer response: Add a STEPLIB DD statement to the JCL used to start the subsystem and restart
Tivoli OPC.
EQQZ073I OPC HAS RECOGNIZED THAT THIS IS A JESTYPE SYSTEM WITH COMMAND CHARACTER
CMDCHAR AND THAT THE NJE NODE NAME IS NJENODE
Explanation: JESTYPE is JES2 or JES3. CMDCHAR is the command character that Tivoli OPC uses when issuing
JESx commands. NJENODE is the name of this network job entry (NJE) node.
System action: Normal processing continues.
System programmer response: If JESTYPE, CMDCHAR, or NJENODE is not correct, check the installation of the
JES2 EXIT7 or JES3 IATUX29, as appropriate. If the shipped EQQEXIT macro has been user-modified, make sure
that it does not prevent or filter the tracking of Tivoli OPC itself.

Chapter 36. EQQZnnn Messages

471

EQQZ074W EQQZ080I

EQQZ074W OPC HAS NOT BEEN ABLE TO DETERMINE NJE NODE NAME FOR THIS SYSTEM
Explanation: The NJENODE parameter was not specified. During initialization of the event writer, Tivoli OPC was
unable to determine the name of the network job entry (NJE) node for this system.
System action: Processing continues.
System programmer response: Check the installation of the JES2 EXIT7 or JES3 IATUX29, as appropriate. If the
shipped EQQEXIT macro has been user-modified, make sure that it does not prevent or filter the tracking of Tivoli
OPC itself.
EQQZ075W THE JES2 COMMAND CHARACTER MAY BE INCORRECT
Explanation: The JES2 command character that Tivoli OPC uses (stated in message EQQZ073I) may be incorrect.
System action: Processing continues.
System programmer response: If the JES2 command character is incorrect, check the installation of the JES2
EXIT7 or JES3 IATUX29, as appropriate. If the shipped EQQEXIT macro has been user-modified, make sure that it
does not prevent or filter the tracking of Tivoli OPC itself.
EQQZ076E DB2SYSTEM KEYWORD NOT SPECIFIED
Explanation: The OPCOPTS or the BATCHOPTS initialization statement defines OPERHISTORY(YES), but the
statement does not specify the DB2SYSTEM keyword.
System action: Tivoli OPC is terminated.
System programmer response: Edit the OPCOPTS or BATCHOPTS statement and either remove the
OPERHISTORY keyword or specify the name of a DB2 system in the DB2SYSTEM keyword.
EQQZ077W OPERHISTORY IS NO BUT RELATED PARAMETERS ARE SPECIFIED: IGNORED
Explanation: The OPCOPTS initialization statement specifies the DB2SYSTEM or CONTROLLERTOKEN
parameter, either without specifying the OPERHISTORY keyword or with OPERHISTORY set to NO.
System action: Processing continues.
System programmer response: Check whether the history function is intentionally disabled or whether the
OPERHISTORY keyword was omitted. If the OPERHISTORY keyword was omitted, add it, setting the value to YES.
EQQZ078I DB2SYSTEM DB2SYS IS NOT AVAILABLE
Explanation: The DB2 system specified in the DB2SYSTEM keyword of the OPCOPTS initialization statement is not
active.
System action: Processing continues, but the history function is not available.
System programmer response: Start the DB2 system.
EQQZ079I DB2SYSTEM DB2SYS IS AVAILABLE
Explanation: The DB2 system specified in the DB2SYSTEM keyword of the OPCOPTS statement has been started.
The Tivoli OPC history function is now available.
System action: Processing continues.
System programmer response: None.
EQQZ080I A STOP OPC COMMAND HAS BEEN RECEIVED
Explanation: The Tivoli OPC address space has received an operator stop command.
System action: Tivoli OPC posts all active subtasks for termination and terminates when all subtasks have
terminated.
User response: None.

472

Tivoli OPC Messages and Codes

EQQZ081E EQQZ087E

| EQQZ081E VARFAIL VALUE INVALID. AT MAXIMUM ONLY 3 CHARACTERS &, %, ? ARE ALLOWED.
|
CHARACTERS CANNOT BE REPEATED
| Explanation: The VARFAIL keyword contains a value different from the three characters that are allowed.
| System action: Tivoli OPC initialization fails.
| System programmer response: Correct the value (or values) in the VARFAIL keyword and restart Tivoli OPC.
EQQZ083E INVALID OPC JOBNAME JOBNAME. NAME MUST BE 4 CHARACTERS OR LESS
Explanation: The Tivoli OPC subsystem task module, EQQMAJOR, has been incorrectly invoked.
System action: The EQQMAJOR module is terminated.
System programmer response: Change the name of the Tivoli OPC subsystem started task to one of the
subsystem names defined in SYS1.PARMLIB and reissue the start command.
EQQZ084E UNABLE TO ATTACH OPC SUBTASK SUBTASK
Explanation: An error occurred when the Tivoli OPC subsystem attempted to attach the subtask SUBTASK.
System action: Tivoli OPC continues processing.
Problem determination: Review earlier messages in the Tivoli OPC message log and SYSLOG datasets to
determine the exact reason for this message. One possibility is that Tivoli OPC is being started in a region that is too
small.
System programmer response: Correct all errors and restart Tivoli OPC.
EQQZ085I OPC SUBTASK SUBTASK IS BEING STARTED
Explanation: The Tivoli OPC subsystem has successfully attached the subtask SUBTASK.
System action: Tivoli OPC continues processing. If the startup process is successful, the subtask issues its own
start message.
User response: None.
EQQZ086I NO ACTIVE OPC SUBTASKS. OPC IS ENDING
Explanation: All Tivoli OPC subtasks have terminated. The Tivoli OPC address space is about to enter its own
termination process.
System action: The Tivoli OPC address space frees all acquired resources and is terminated.
User response: None.
EQQZ087E OPC JOBNAME JOBNAME IS NOT A VALID SUBSYSTEM NAME
Explanation: The Tivoli OPC subsystem task module, EQQMAJOR, has been incorrectly invoked.
System action: The EQQMAJOR module is terminated.
System programmer response: Change the name of the Tivoli OPC subsystem started task to one of the
subsystem names defined in SYS1.PARMLIB and reissue the start command.

Chapter 36. EQQZnnn Messages

473

EQQZ088E EQQZ094E

EQQZ088E THE OPC INITIALIZATION PROGRAM, EQQINIT, HAS NOT BEEN SUCCESSFULLY EXECUTED. THE
OPC SUBSYSTEM IS UNABLE TO START
Explanation: The Tivoli OPC subsystem could not start because the required CSA resident control could not be
located or was invalid. These control blocks are built during IPL by the EQQINIT program.
System action: The subsystem task module, EQQMAJOR, is terminated.
Problem determination: Check that the currently active IEFSSNxx member of SYS1.PARMLIB defines the Tivoli
OPC subsystem correctly. Check also that EQQINIT is present in SYS1.LINKLIB or in a library in the LNKLSTxx
concatenation of libraries. Review the master console messages issued during IPL.
System programmer response: Correct all errors and restart Tivoli OPC after an IPL of the MVS system.
EQQZ090W THE NOERROR VALUE, VALUE, IS INCORRECTLY SPECIFIED
Explanation: A NOERROR statement or the NOERROR keyword of the JTOPTS contains an error. Entry VALUE is
not valid.
System action: The normal mode manager (NMM) is terminated.
System programmer response: Correct the entry and restart the NMM subtask or the Tivoli OPC address space.
EQQZ091W WRONG NUMBER OF PERIODS IN THE NOERROR VALUE, VALUE
Explanation: A NOERROR statement or the NOERROR keyword of JTOPTS contains an error. Entry VALUE is not
valid. The number of periods in each entry must be either zero or three.
System action: The normal mode manager (NMM) is terminated.
System programmer response: Correct the entry and restart the NMM subtask or the Tivoli OPC address space.
EQQZ092W PERIODS ARE NOT PLACED CORRECTLY IN THE NOERROR VALUE, VALUE
Explanation: A NOERROR statement or the NOERROR keyword of JTOPTS contains an error. Entry VALUE is not
valid. The periods in an entry must be separated by not less than one and not greater than eight nonblank
characters.
System action: The normal mode manager (NMM) is terminated.
System programmer response: Correct the entry and restart the NMM subtask or the Tivoli OPC address space.
EQQZ093E FILE KEYWORD IS MISSING
Explanation: The current AUDIT statement does not contain the FILE keyword.
System action: The normal mode manager (NMM) is terminated.
System programmer response: Add the FILE keyword to the current AUDIT statement and restart the Tivoli OPC
subsystem.
EQQZ094E A PARAMETER IS REQUIRED FOR THE FILE KEYWORD
Explanation: The FILE keyword in the current AUDIT statement does not specify a value.
System action: The normal mode manager (NMM) is terminated.
System programmer response: Add the FILE keyword to the current AUDIT statement and restart the Tivoli OPC
subsystem.

474

Tivoli OPC Messages and Codes

EQQZ095I EQQZ103W

| EQQZ095I GENSERV
: STG
|
CPLOCK
: STC
|
EVENTS
: STE
|
WSATASK
: STW
|
EVELIM VALUE : EVE
|
STATIM VALUE : STA
Explanation: This message is issued after the /F subsys,DSPSTA command has been given. It indicates whether
the keywords GENSERV, CPLOCKS, EVENTS, and WSATASK have been activated. (These are activated either by
the STATIM initial parameter statement or by the appropriate modify command.) The message also displays the
current value of the EVELIM and STATIM keywords. These values can be used to specify how often statistics
messages are issued.

STG
STC
STE
STW
EVE
STA

“Active” if GENSERV statistic messaging is currently active. Otherwise, “Inactive.”
“Active” if CPLOCK statistic messaging is currently active. Otherwise, “Inactive.”
“Active” if EVENTS statistic messaging is currently active. Otherwise, “Inactive.”
“Active” if WSATASK statistic messaging is currently active. Otherwise, “Inactive.”
The current value of the EVELIM parameter, which can be in the range 0–9999.
The current value of the STATIM parameter, which can be in the range 0–99.

System action: Processing continues.
User response: None.
System programmer response: None.
EQQZ100E THE GMTOFFSET VALUE IS REQUIRED AND MUST BE AN INTEGER
Explanation: The GMTOFFSET keyword specifies an incorrect value. The value is required and it must be a
positive or negative integer.
System action: Tivoli OPC considers the current initialization statement to be incorrectly coded. This causes Tivoli
OPC initialization to fail.
System programmer response: Correct the GMTOFFSET value and restart Tivoli OPC.
EQQZ101E THE GMTOFFSET VALUE MUST BE IN THE RANGE -1439 TO +1439
Explanation: The GMTOFFSET keyword specifies a value that is outside the range of valid values.
System action: Tivoli OPC considers the current initialization statement to be incorrectly coded. This causes Tivoli
OPC initialization to fail.
System programmer response: Correct the GMTOFFSET value and restart Tivoli OPC.
EQQZ102E THE SAME SYSTEM ID OCCURS MORE THAN ONCE IN THE SYSID KEYWORD
Explanation: The same system ID occurs more than once in the SYSID keyword of the ROUTOPTS initialization
statement. Tivoli OPC cannot determine to which system ID the DESTID should be connected.
System action: Tivoli OPC initialization fails and the subsystem is terminated.
System programmer response: Correct the SYSID keyword values and restart Tivoli OPC.
EQQZ103W THE SAME DESTINATION ID OCCURS MORE THAN ONCE IN THE DESTID KEYWORD
Explanation: The same destination ID occurs more than once in the DESTID keyword of the ROUTOPTS
initialization statement.
System action: Tivoli OPC processing continues.
System programmer response: Verify the SYSID and DESTID keywords and, if necessary, change them.

Chapter 36. EQQZnnn Messages

475

EQQZ104E EQQZ112E

EQQZ104E UNPAIRED NUMBER OF SYSTEM IDS AND DESTINATIONS
Explanation: The number of values in the SYSID keyword of the ROUTOPTS initialization statement does not match
the number of values in the DESTID keyword.
System action: Tivoli OPC initialization fails and the subsystem is terminated.
System programmer response: Change the SYSID and DESTID keywords so that they contain the same number
of values and restart Tivoli OPC.
EQQZ106W PERCENT % OF QUEUE QNAME IN USE
Explanation: The utilization of a queue has exceeded a threshold value.
System action: None.
System programmer response: Ensure that all subtasks are active. Check system contention.
EQQZ107E TOO MANY DASD CONNECTIONS DEFINED
Explanation: You defined more than 16 destinations in the DASD keyword of the ROUTOPTS initialization
statement. A maximum of 16 submit/release datasets can be used at the same time.
System action: Tivoli OPC initialization fails and the subsystem is terminated.
Tivoli OPC administrator response: Change the DASD keyword to specify fewer destinations and restart the
subsystem.
EQQZ110E AN XCF CONNECTION HAS BEEN SPECIFIED IN THE OPT STATEMENT, BUT THE XCFOPTS
INITIALIZATION STATEMENT IS MISSING
Explanation: A XCF connection cannot be established between the controller and a tracker because the parameter
member being processed does not contain an XCFOPTS initialization statement.
The XCF connection is defined by the XCF keywords in the controller ROUTOPTS statement and the HOSTCON
keyword of the tracker TRROPTS statement.
System action: Tivoli OPC initialization is terminated.
System programmer response: Add the XCFOPTS statement or change the SNA or HOSTCON keyword.
EQQZ111E AN SNA CONNECTION HAS BEEN SPECIFIED IN THE OPT STATEMENT, BUT NCFTASK(YES) IS
NOT SPECIFIED IN OPCOPTS
Explanation: An SNA connection cannot be established between the controller and a tracker because the
OPCOPTS init statement does not contain NCFTASK(YES).
The SNA connection is defined by the SNA keywords in the controller ROUTOPTS statement and the HOSTCON
keyword of the tracker TRROPTS statement.
System action: Tivoli OPC initialization is terminated.
System programmer response: Add the NCFTASK(YES) and NCFAPPL(applid) keywords or change the SNA or
HOSTCON keywords.
EQQZ112E A DESTINATION HAS BEEN SPECIFIED IN THE OPCAV1R2 KEYWORD IN THE ROUTOPTS
STATEMENT. THIS DESTINATION IS NOT FOUND IN THE SNA OR THE DASD KEYWORD
Explanation: A destination specified in the OPCAV1R2 keyword must also be defined in the SNA or DASD keyword.
System action: Tivoli OPC initialization is terminated.
System programmer response: If the destination represents an OPC/A Version 1 Release 2 NEC system, specify it
in the SNA keyword.
If the destination represents an OPC/A Version 1 Release 2 EMS system connected to the controller through shared
DASD, specify it in the DASD keyword.

476

Tivoli OPC Messages and Codes

EQQZ113E EQQZ118E

EQQZ113E THE HOSTCON KEYWORD IN TRROPTS DEFINES AN SNA CONTROLLER CONNECTION, BUT THE
SNAHOST KEYWORD IS MISSING
Explanation: An SNA connection cannot be established between the controller and a tracker because the
SNAHOST keyword does not contain the controller VTAM application ID.
The VTAM application ID of the controller is defined in the OPCOPTS initialization statement for the controller,
keyword NCFAPPL.
System action: Tivoli OPC initialization is terminated.
System programmer response: Update the SNAHOST with this ID.
EQQZ114E THE SNAHOST KEYWORD IN TRROPTS IS SPECIFIED, BUT THE CONTROLLER CONNECTION
DEFINED IN THE HOSTCON KEYWORD IS NOT SNA
Explanation: The initialization statement is inconsistent.
System action: Tivoli OPC initialization is terminated.
System programmer response: Delete the SNAHOST keyword or update the HOSTCON keyword to specify SNA.
EQQZ115E THE SAME DESTINATION APPEARS IN MORE THAN ONE OF THE SNA, XCF, USER, TCP, APPC
AND DASD KEYWORDS IN THE ROUTOPTS STATEMENT
Explanation: A destination name must be unique within the Tivoli OPC configuration. A destination can be reached
by only one of the supported methods.
System action: Tivoli OPC initialization is terminated.
System programmer response: Correct the ROUTOPTS statement.

| EQQZ116E AN XCF OR APPC CONNECTION HAS BEEN REQUESTED BUT THE LEVEL OF THE MVS SYSTEM
|
DOES NOT SUPPORT IT
Explanation: If the XCF keyword of a ROUTOPTS initialization statement or the HOSTCON keyword of a TRROPTS

| initialization statement requests an XCF destination, your system must be MVS SP 4.1 or later. If the APPC keyword
| of a ROUTOPTS initialization statement requests an APPC destination, your system must be MVS SP 4.2.2 or later.
System action: Tivoli OPC initialization is terminated.
System programmer response: Change the ROUTOPTS or TRROPTS initialization statement so that no
unsupported destinations are requested.
EQQZ117E THE TRROPTS STATEMENT IS NOT APPLICABLE FOR A CONTROLLER OR STANDBY SYSTEM
Explanation: This Tivoli OPC subsystem is defined as a controller or standby system. The TRROPTS statement is
not allowed.
System action: Tivoli OPC initialization is terminated.
System programmer response: Remove the TRROPTS statement. Use the ROUTOPTS statement to define
routing information for a controller or standby system.
EQQZ118E THE ROUTOPTS STATEMENT IS NOT APPLICABLE AT A TRACKER SYSTEM
Explanation: This Tivoli OPC subsystem is defined as a tracker system. The ROUTOPTS statement is not allowed.
System action: Tivoli OPC initialization is terminated.
System programmer response: Remove the ROUTOPTS statement. Use the TRROPTS statement to define
routing information for a tracker system.

Chapter 36. EQQZnnn Messages

477

EQQZ119E EQQZ123E

EQQZ119E MORE THAN 1000 DESTINATIONS DEFINED FOR CONNECTION
Explanation: More than 1000 tracker or Tracker Agent destinations are defined on the ROUTOPTS statement for
connection to the controller.
System action: Tivoli OPC initialization is terminated.
System programmer response: Connect fewer trackers by redefining the ROUTOPTS statement. If you have more
than 1000 trackers or Tracker Agents, you can create clusters of trackers that use only one connection to the
controller. For example, if you have five systems in one data center currently NCF-connected to the controller and the
systems share DASD, you can start four event reader subtasks on one of the trackers and have a single VTAM link to
the controller.
The Tracker Agent for OS/400 and the Tracker Agent for AIX also provide a focal point service for networked OS/400
and AIX/6000 systems. This enables you to use a single communication link between the controller and the focal
point Tracker Agent to schedule work on any number of systems connected to the focal point.
EQQZ120E CF FUNCTION FUNCTION FAILED WITH RETURN CODE=RETCODE AND REASON CODE
RESCODE
Explanation: This message lists the service requested, the failed function, the return code, and the reason code.
System action: Depending on what kind of service failed, Tivoli OPC either continues processing without the
requested service or is terminated.
Problem determination: Review the message log (EQQMLOG) and look for preceding error messages relating to
the problem. Use the FUNCTION, RETCODE, and RESCODE to determine the cause of the error:
When CF indicates XCF, or APPC and FUNCTION indicates JOINX, refer to the appropriate MVS SP Authorized
Assembler Reference manual (see IXCJOIN macro) for the currently active MVS system.
When CF indicates APPC, function IDEN and code=2C, make sure that the MVS/APPC address space is started.
For other errors, refer to the appropriate MVS SP Authorized Callable Services manual for the currently active
MVS system.
System programmer response: Correct the error and restart the Tivoli OPC address space.
EQQZ121E OPC XCF CONNECTIONS ARE NOT SUPPORTED ON A LOCAL-SYSPLEX
Explanation: The sysplex mode is LOCAL-SYSPLEX. This configuration is not supported by Tivoli OPC. Only
MULTISYSTEM or MONOPLEX sysplex configurations are supported.
System action: Tivoli OPC initialization is terminated.
System programmer response: Change the communication method and restart Tivoli OPC.
EQQZ122E KEYWORD KEYWORD IN CURRENT INITIALIZATION STATEMENT IS MISSING
Explanation: The specified keyword in the current initialization statement is required.
System action: Tivoli OPC initialization is terminated.
Tivoli OPC administrator response: Add the missing keyword to the initialization statement and restart Tivoli OPC.
EQQZ123E KEYWORD KEYWORD IN TRROPTS INITIALIZATION STATEMENT IS MISSING
Explanation: The HOSTCON keyword in the TRROPTS initialization statement is missing.
System action: Tivoli OPC initialization is terminated.
Tivoli OPC administrator response: Correct the invalid TRROPTS initialization statement and restart Tivoli OPC.

478

Tivoli OPC Messages and Codes

EQQZ124E EQQZ128I

EQQZ124E OWN KW APPEARS AS A DESTINATION IN STMT
Explanation: The same name appears in one of these keywords:
XCFOPTS MEMBER
OPCOPTS NCFAPPL
and also one of these keywords:
ROUTOPTS SNA
ROUTOPTS XCF
TRROPTS SNAHOST
This duplication is not allowed.
System action: Tivoli OPC initialization is terminated.
Tivoli OPC administrator response: Correct the invalid initialization statement and restart Tivoli OPC.
EQQZ125E OPC CANNOT CONTINUE PROCESSING DUE TO FULL QUEUE: QNAME THE SUBSYSTEM IS
TERMINATING
Explanation: One of the Tivoli OPC internal queues is full. The subsystem was canceled by the task that added the
last element.
System action: The Tivoli OPC subsystem is terminated.
Problem determination: Check the Tivoli OPC message log for EQQZ106W messages indicating which queue is
full. Check for other previous messages about the subtask that is processing the queue:
MGRQ
SUBQ
RTRQ
NCFQ

Event manager
Submit task
Data router task
NCF task

Tivoli OPC administrator response: Restart the Tivoli OPC subsystem and verify that all subtasks start normally.
EQQZ126W THE SYSTEM WHERE THE OPC HOST IN THE XCF GROUP XCFG WAS RUNNING HAS FAILED. A
TAKEOVER BY THE STANDBY HOST XCFSTB MUST BE INITIATED BY THE OPERATOR.
Explanation: The Tivoli OPC standby subsystem has detected that the MVS image on which the Tivoli OPC host is
located is down.
System action: None.
User response: Restart MVS and the Tivoli OPC host or use the Modify command to order the Tivoli OPC standby
subsystem to perform a takeover of the controller functions.
EQQZ127W THE OPC HOST IN XCF GROUP XCFG HAS FAILED. A TAKEOVER BY THE STANDBY HOST
XCFSTB MUST BE INITIATED BY THE OPERATOR.
Explanation: This Tivoli OPC standby subsystem has detected that the Tivoli OPC host is not running.
System action: None.
User response: Restart the Tivoli OPC host or use the Modify command to order the Tivoli OPC standby subsystem
to perform a takeover.
EQQZ128I OPC ACTIVE IN STANDBY MODE
Explanation: This system has been fully initialized in standby mode.
System action: None.
System programmer response: None.

Chapter 36. EQQZnnn Messages

479

EQQZ129I EQQZ134I

EQQZ129I TAKEOVER IN PROGRESS
Explanation: This system has started takeover processing.
System action: The system continues initialization as the new host.
System programmer response: None.
EQQZ130W XCF FUNCTION MSGO HAS FAILED DUE TO SIGNALLING FACILITY BUSY
Explanation: An XCF transmission was not successfully sent.
System action: The system tries to resend it. If the data queue element has not been successfully transmitted
within five minutes, it is discarded.
Problem determination: This message can indicate that insufficient space in the message buffer has been allocated
in the transport class, for the Tivoli OPC user. If this message appears on your system, increase the value you have
specified for MAXMSG or, if you have not specified a value for MAXMSG, include this keyword with a value greater
than 500, which is the default.
System programmer response: Check the XCF transmission capacity.
EQQZ131W THE FOLLOWING OUTBOUND QUEUE ELEMENT HAS BEEN DISCARDED DUE TO REPEATED
TRANSMISSION ERRORS: DQE
Explanation: The system tried for five minutes to send the data queue element, but did not succeed. The data
queue element is discarded.
System action: Processing continues.
System programmer response: None.
EQQZ132W THE FOLLOWING INBOUND QUEUE ELEMENT HAS BEEN DISCARDED DUE TO MISSING
EXTENSION BUFFER SEGMENTS: DQE
Explanation: The system waited five minutes for a minimum of one missing buffer segment and then discarded the
data queue element and the incomplete extension buffer.
System action: Processing continues.
System programmer response: None.
EQQZ133W THE FOLLOWING INBOUND QUEUE ELEMENT WITH MISSING EXTENSION BUFFER SEGMENTS
HAS BEEN DISCARDED DUE TO DATA ROUTER TERMINATION: DQE
Explanation: A data queue element with an incomplete buffer was present when the data router task terminated.
System action: Data router termination continues.
System programmer response: None.
EQQZ134I AN OPC CONTROLLER IS ALREADY ACTIVE WITHIN THE SAME XCF GROUP AS THIS SYSTEM
Explanation: This system has been started as a host within a Tivoli OPC XCF group including an active host.
System action: The system is terminated.
System programmer response: Check XCFOPTS for the group keyword value. Check OPCOPTS for the
OPCHOST keyword value.

480

Tivoli OPC Messages and Codes

EQQZ135E EQQZ145E

EQQZ135E THE TRROPTS INITIALIZATION STATEMENT IS REQUIRED FOR A TRACKER SYSTEM
Explanation: A tracker system was started with no TRROPTS initialization statement.
If OPCHOST(NO) is specified, Tivoli OPC needs to know how the tracker is connected to the controller. This is
defined in the HOSTCON keyword in TRROPTS. The possible connections are:
Shared DASD
XCF
SNA

The controller and tracker communicate via an event dataset and optionally a submit/release
dataset.
The controller and tracker communicate via XCF communication links.
The controller and tracker communicate via VTAM communication links.

System action: Tivoli OPC initialization fails and the subsystem is terminated.
User response: Add a TRROPTS initialization statement specifying the controller connection type.
EQQZ140E YEAR, MONTH, AND DAY MUST ALL BE TWO-DIGIT NUMBERS
Explanation: A nonnumeric date value has been specified.
System action: Processing continues.
System programmer response: Reenter a numeric date value.

| EQQZ141E YEAR MUST BE IN THE RANGE 00 TO 99
Explanation: The year value is not valid. Year must be specified as 72 to 99 for years 1972 to 1999 or 00 to 71 for
years 2000 to 2071.
System action: Processing continues.
System programmer response: Reenter the date value and specify a year number in the range 00 through 99.
EQQZ142E MONTH MUST BE IN THE RANGE 1 TO 12
Explanation: A date value has been specified where the month number is not valid.
System action: Processing continues.
System programmer response: Reenter the date value and specify a month number in the range 1 through 12.
EQQZ143E DAY MUST BE IN THE RANGE 1 TO 31
Explanation: A date value has been specified where the day number is not valid.
System action: Processing continues.
System programmer response: Reenter the date value and specify a day number in the range 1 through 31.
EQQZ144E DAY DD IS NOT VALID IN FEBRUARY
Explanation: A date value has been specified where the month number is 2 and the day number is greater than 29.
System action: Processing continues.
System programmer response: Reenter the date value and specify a valid day number for February.
EQQZ145E MONTH MM DOES NOT HAVE 31 DAYS
Explanation: A date value has been specified with a day value of 31 for a month that only has 30 days.
System action: Processing continues.
System programmer response: Reenter the date value and specify a valid day and month combination.

Chapter 36. EQQZnnn Messages

481

EQQZ146E EQQZ151I

EQQZ146E YEAR YY DOES NOT HAVE 29 DAYS IN FEBRUARY
Explanation: A date value has been specified where the month number is 2 and the day number is 29 but the year
is not a leap year.
System action: Processing continues.
System programmer response: Reenter the date value and specify a valid day number for February.
EQQZ147E HOUR AND MINUTE MUST BOTH BE TWO-DIGIT NUMBERS
Explanation: A nonnumeric time value has been specified.
System action: Processing continues.
System programmer response: Reenter a numeric time value.
EQQZ148E HOUR MUST BE IN THE RANGE 0 TO 23
Explanation: A time value has been specified where the hour number is not valid.
System action: Processing continues.
System programmer response: Reenter the time value and specify an hour number in the range 0 through 23.
EQQZ149E MINUTE MUST BE IN THE RANGE 0 TO 59
Explanation: A time value has been specified where the minute number is not valid.
System action: Processing continues.
System programmer response: Reenter the time value and specify a minute number in the range 0 through 59.

| EQQZ150I OLD MESSAGE TRIGGERED DUMP MESSAGE NUMBER(S)
| Explanation: The message (or messages) that triggers a dump has been changed by a Modify command. Message
| EQQZ152I follows this message, showing the old message number (or numbers).
| System action: Tivoli OPC processing continues.
| Problem determination: None
| System programmer response: None
| User response: None
| Tivoli OPC administrator response: None
| Operator response: None
| EQQZ151I NEW MESSAGE TRIGGERED DUMP MESSAGE NUMBER(S)
| Explanation: The message (or messages) that triggers a dump has been changed by a Modify command. Message
| EQQZ152I follows this message, showing the new message number (or numbers).
| System action: Tivoli OPC processing continues.
| Problem determination: None
| System programmer response: None
| User response: None
| Tivoli OPC administrator response: None
| Operator response: None

482

Tivoli OPC Messages and Codes

EQQZ152I EQQZ161E

| EQQZ152I MSGNO
| Explanation: The subsystem job-step task uses this message to print the message number (or numbers) that
| triggers a dump, when this number (or numbers) is changed by a Modify command.
| System action: Tivoli OPC processing continues.
| Problem determination: None
| System programmer response: None
| User response: None
| Tivoli OPC administrator response: None
| Operator response: None
EQQZ153E TOO MANY USER DESTINATIONS DEFINED
Explanation: You defined more than 64 destinations in the USER keyword of the ROUTOPTS initialization
statement. A maximum of 64 user defined destinations can be used at the same time.
System action: Tivoli OPC initialization fails and the subsystem is terminated.
Tivoli OPC administrator response: Change the USER keyword to specify fewer destinations and restart the
subsystem.
EQQZ154E THE PIFHD KEYWORD IS MISSING OR INVALID
Explanation: The PIFHD keyword on the INTFOPTS initialization statement is required. You have not defined the
keyword or the keyword has an invalid value.
System action: Tivoli OPC initialization fails and the subsystem is terminated.
Tivoli OPC administrator response: Change or add the keyword to the INTFOPTS initialization statement and
restart the subsystem.
EQQZ160E LIBRARY WITH DDNAME EQQJCLIB COULD NOT BE OPENED
Explanation: Tivoli OPC could not open a required input dataset, ddname EQQJCLIB. This message can be issued:
During initialization of the event writer task.
When processing a Modify command with the NEWDSLST option.
System action: If the message was issued when processing a Modify command, the dataset selection table that was
previously built remains in effect. If the error occurs during initialization, dataset triggering functions are not available.
System programmer response: If the dataset triggering function should be active, check that EQQJCLIB is correctly
defined and that the Tivoli OPC started task is authorized to open the dataset. Restart the tracker or issue the Modify
command when the problem has been corrected.
EQQZ161E UNABLE TO ALLOCATE STORAGE TO PROCESS MEMBER EQQDSLST OF EQQJCLIB
Explanation: An error occurred when allocating storage to build a dataset selection table. This message can be
issued:
During initialization of the event writer task.
When processing a Modify command with the NEWDSLST option.
System action: If the message was issued when processing a Modify command, the dataset selection table that was
previously built remains in effect. If the error occurs during initialization, dataset triggering functions are not available.
System programmer response: Verify that the EQQDSLST member in the EQQJCLIB library is not too large. If it
is not, determine which product or program, or both, is exhausting ECSA storage. Restart the tracker or issue the
Modify command when the problem has been corrected.

Chapter 36. EQQZnnn Messages

483

EQQZ162W EQQZ165I

EQQZ162W UNABLE TO FIND MEMBER EQQDSLST IN EQQJCLIB
Explanation: Tivoli OPC could not find the member EQQDSLST in the dataset referenced by the EQQJCLIB
ddname. This message can be issued:
During initialization of the event writer task.
When processing a Modify command with the NEWDSLST option.
System action: If the message was issued when processing a Modify command, the dataset selection table that was
previously built remains in effect. If the error occurs during initialization, dataset triggering functions are not available.
System programmer response: If the dataset triggering function should be active, check that EQQJCLIB contains
the EQQDSLST member that is created by assembling the EQQLSENT macro (see EQQLSJCL sample). Restart the
tracker or issue the Modify command when the EQQDSLST member has been created.
EQQZ163W MEMBER EQQDSLST IN EQQJCLIB IS EMPTY
Explanation: Member EQQDSLST exists in library EQQJCLIB, but there are no records in the member. This
message can be issued:
During initialization of the event writer task.
When processing a Modify command with the NEWDSLST option.
System action: If the message was issued when processing a Modify command, the dataset selection table that was
previously built remains in effect. If the error occurs during initialization, dataset triggering functions are not available.
System programmer response: If the dataset triggering function should be active, check that EQQJCLIB contains a
valid EQQDSLST member that is created by assembling the EQQLSENT macro. The dataset selection table must
contain at least an end-of-table indicator created with STRING=LASTENTRY as input to EQQLSENT. Restart the
tracker or issue the Modify command when the problem has been corrected.
EQQZ164E MEMBER EQQDSLST CONTAINS INVALID DATA
Explanation: Member EQQDSLST contains invalid data or is missing an end-of-table marker. This message can be
issued:
During initialization of the event writer task.
When processing a Modify command with the NEWDSLST option.
System action: If the message was issued when processing a Modify command, the dataset selection table that was
previously buile remains in effect. If the error occurs during initialization, dataset triggering functions are not available.
System programmer response: Check the output listing from the EQQLSENT assembly for error. The dataset
selection table must contain at least an end-of-table indicator created with STRING=LASTENTRY as input to the
EQQLSENT macro. Restart the tracker or issue the Modify command when the problem has been corrected.
EQQZ165I MEMBER EQQDSLST OF LIBRARY EQQJCLIB IS SUCCESSFULLY LOADED
Explanation: Tivoli OPC has successfully created a dataset selection table from the current contents of member
EQQDSLST in the library defined by the EQQJCLIB DD statement. This message is issued when an event writer first
creates the table after an IPL or when the table is rebuilt during the processing of a Modify command with Modify
option NEWDSLST.
System action: Tivoli OPC continues normal processing.
System programmer response: None.

484

Tivoli OPC Messages and Codes

EQQZ170E EQQZ174W

EQQZ170E OPC CODE LEVEL VERIFICATION FAILED
CODE LEVEL OF THE SSX CONTROL BLOCK IS SSXLEV
CODE LEVEL OF THE EQQMAJOR MODULE IS MCALEV
CODE LEVEL OF THE SSCM MODULE IS SSCMLEV
Explanation: Tivoli OPC initialization has determined that the SSX control block, the EQQMAJOR module and the
EQQSSCMx load module are on different service levels. This difference is not supported.
System action: Tivoli OPC initialization fails.
System programmer response: Verify that Tivoli OPC is using the correct load library. If the SSX control block and
the EQQMAJOR module are on different code levels, modify the OPCOPTS statement, specifying the BUILDSSX
keyword. If the EQQSSCMx and the EQQMAJOR modules are on different code levels, modify the OPCOPTS
statement, adding or changing the SSCMNAME keyword.
After making the appropriate changes, restart the Tivoli OPC subsystem.
EQQZ171E MERGE PARAMETER IS NOT SUPPORTED. OLD SSX AND NEW SSX ARE NOT FOR THE SAME
FMID
CODE LEVEL OF THE NEW SSX CONTROL BLOCK IS SSXLEV
CODE LEVEL OF THE OLD SSX CONTROL BLOCK IS OLDLEV
Explanation: The MERGE parameter of the BUILDSSX keyword is supported only when the old SSX control block
was built for the same FMID as the current EQQMAJOR module.
System action: Tivoli OPC initialization fails.
System programmer response: Change the BUILDSSX keyword to specify BUILDSSX(REBUILD).
EQQZ172I SSX BLOCK OF VERSION SSXLEV SUCCESSFULLY BUILT
Explanation: The BUILDSSX keyword was specified in the OPCOPTS control statement and Tivoli OPC has
successfully verified that the EQQSSCM load module is of the correct version. A new SSX control block has been
built and is used by this Tivoli OPC address space.
System action: The Tivoli OPC address space initialization continues.
EQQZ173I SSX BLOCK OF VERSION SSXLEV SUCCESSFULLY RESTORED
Explanation: The BUILDSSX keyword was specified in the OPCOPTS control statement and Tivoli OPC has
successfully restored the previous version of the SSX block as the operative version.
This message is issued only when the SSX block was rebuilt by the Tivoli OPC address space using the BUILDSSX
keyword and when the address space is about to terminate.
The SSXLEV variable indicates the code level of the SSX that is restored. The restored SSX is used by all Tivoli
OPC functions while the Tivoli OPC subsystem is inactive.
System action: The Tivoli OPC address space termination continues.
EQQZ174W OLD AND NEW SSX CONTROL BLOCK ARE ON THE SAME LEVEL, SSXLEV
Explanation: The BUILDSSX keyword was specified in the OPCOPTS control statement and a new SSX block has
been successfully built. However, the new and the old SSX control block are at the same code level.
System action: Tivoli OPC initialization continues.
System programmer response: If this message is expected, modify the OPCOPTS statement, removing the
BUILDSSX keyword.
If this message is not expected, verify that the load modules used by Tivoli OPC are coming from the correct load
libraries. After making the appropriate changes, restart the Tivoli OPC subsystem.

Chapter 36. EQQZnnn Messages

485

EQQZ175E EQQZ179E

EQQZ175E INCONSISTENT DEFINITION OF JOBLOGRETRIEVAL KEYWORD
Explanation: You have made an inconsistent definition of JOBLOGRETRIEVAL in JOBOPTS. Check the following
conditions:
OPCHOST(NO) must be specified on OPCOPTS
CATMGT(YES) must be specified on OPCOPTS
If you have specified JOBLOGRETRIEVAL(DELAYED) or (DELAYEDEXIT), you must have a EXITS statement
with CALL010(YES) or LOAD010(nnnnnnnn).
System action: Tivoli OPC is terminated.
User response: Correct the inconsistent definition and restart Tivoli OPC.
EQQZ176E INCONSISTENT DEFINITION OF CATMDISP KEYWORD
Explanation: You have made an inconsistent definition of CATMDISP in JOBOPTS. Check the following conditions:
OPCHOST(NO) must be specified on OPCOPTS
CATMGT(YES) must be specified on OPCOPTS
A JOBLOGRETRIEVAL other than NONE is specified.
System action: Tivoli OPC is terminated
User response: Correct the inconsistent definition and restart Tivoli OPC.
EQQZ177E INCONSISTENT DEFINITION OF MAXNUMUSYS KEYWORD
Explanation: You have made an inconsistent definition of MAXNUMUSYS in JOBOPTS. Check the following
conditions:
OPCHOST(NO) must be specified on OPCOPTS
CATMGT(YES) must be specified on OPCOPTS
A JOBLOGRETRIEVAL value other than NONE is specified.
System action: Tivoli OPC is terminated.
User response: Correct the inconsistent definition and restart Tivoli OPC.
EQQZ178E INCONSISTENT DEFINITION OF JOBLOGDEST KEYWORD
Explanation: You have made an inconsistent definition of JOBLOGDEST in OPCOPTS. Check the following
conditions:
OPCHOST(YES) must be specified
CATMGT(YES) must be specified.

| Also check that the destination pairs specified are in alignment with those defined in the ROUTOPTS statement.
System action: Tivoli OPC is terminated.
User response: Correct the inconsistent definition and restart Tivoli OPC.
EQQZ179E UNBALANCED PAIR OF DESTINATIONS IN JOBLOGDEST KEYWORD
Explanation: You have specified a JOBLOGDEST that contains an unbalanced definition of destinations. Either the
execution destination is specified, but no retrieval destination, or a retrieval destination is specified, but no execution
destination.
System action: Tivoli OPC is terminated.
User response: Correct the inconsistent definition and restart Tivoli OPC.
System programmer response: None.

486

Tivoli OPC Messages and Codes

EQQZ180E EQQZ186I

EQQZ180E INCONSISTENT DEFINITION OF EXIT STATEMENT AND JOBLOGRETRIEVAL KEYWORD
Explanation: You have specified the JOBLOGRETRIEVAL keyword with value DELAYED or DELAYEDEXIT. The
value implies the use of a user exit, UX010, that has not been defined to Tivoli OPC.
System action: Tivoli OPC is terminated.
System programmer response: Correct the inconsistent definitions and restart Tivoli OPC.
EQQZ181E UNPAIRED DESTINATION:IPADDR SPECIFIED IN THE TCP KEYWORD
Explanation: In the TCP keyword of the ROUTOPTS statement each destination must be paired with the IP address
of the corresponding tracker.
System action: Tivoli OPC is terminated.
System programmer response: Correct the inconsistent definitions and restart Tivoli OPC.
EQQZ182E SUBSTRING EXCEEDS BOUNDS OR LENGTH ZERO WAS FOUND IN PARMREC
Explanation: During symbol substitution of PARMLIB, a substringed symbol was encountered. It exceeds either the
bounds of the substitution text or a substring, in which the length specified was 0. The incorrect record follows in
message EQQZ182I.
System action: The task is terminated.
System programmer response: Correct the wrong symbol definitions. Restrictions in usage of the symbols are
found in MVS/ESA Assembler Services Reference.
EQQZ183E UNEXPECTED ERROR DURING SYMBOL SUBSTITUTION
Explanation: During symbol substitution processing, an unexpected error occurred.
System action: The task is terminated.
System programmer response: Contact your IBM representative. Provide a copy of the message log as
documentation. A possible solution is to remove the symbols from the PARMLIB member being processed.
EQQZ184E XCF STATEMENT NEEDED WHEN OPCOPT OPCHOST(PLEX) SPECIFIED
Explanation: During the processing of the XCF statement, either the MEMBER or the GROUP keyword is missing.
These keywords are required when OPCOPT OPCHOST(PLEX) is specified.
System action: Tivoli OPC stops processing.
System programmer response: Correct the statement definitions, either by adding the correct XCF MEMBER and
GROUP definitions or by changing the OPCHOST(PLEX) keyword.
EQQZ185I OPC WILL START AS AN ACTIVE CONTROLLER
Explanation: The Tivoli OPC subsystem starts as an active controller, with job submission and tracking functions as
defined in the initialization parameters.
System action: Tivoli OPC startup continues.
System programmer response: None.
EQQZ186I OPC WILL START AS A STANDBY CONTROLLER
Explanation: The Tivoli OPC subsystem starts as an standby controller, ready to take over job submission and
tracking functions from the active controller, as defined in the initialization parameters.
System action: Tivoli OPC startup continues.
System programmer response: None.

Chapter 36. EQQZnnn Messages

487

EQQZ187E EQQZ192E

EQQZ187E CHECKPOINT DATASET WAS NOT INITIALIZED
Explanation: During the startup with OPCOPTS OPCHOST(PLEX), the checkpoint dataset is not initialized. This is
not supported.
System action: Tivoli OPC stops processing.
System programmer response: Start one Tivoli OPC controller with OPCOPTS OPCHOST(YES) to initialize the
checkpoint dataset with the correct FMID and service level for a Sysplex Controller configuration.
EQQZ188E UNEXPECTED RETURN CODE DURING SYMBOL SUBSTITUTION
Explanation: During symbol substitution an unexpected return code was issued by the MVS symbol substitution
services. Diagnosis messages are shown.
System action: Tivoli OPC stops processing.
System programmer response: Save the parameter dataset definitions, the message log and the current values of
MVS static symbols. Contact your IBM representative. A possible solution is to remove the symbols from the
PARMLIB member being processed.
EQQZ189W OPCOPT OPCHOST(PLEX) WAS SPECIFIED BUT NO TAKEOVER KEYWORD FOR THE XCFOPTS
STATEMENT WAS FOUND
Explanation: The initialization statement OPCOPT OPCHOST(PLEX) was specified, but no TAKEOVER keyword for
the XCFOPTS statement was coded. This is necessary to avoid operator intervention in a takeover situation.
System action: Tivoli OPC startup continues.
System programmer response: Code either TAKEOVER SYSFAIL or HOSTFAIL, as appropriate.
EQQZ190E THE FMID FILEFMID OF DATASET FILENAME DOES NOT MATCH OPC CODE FMID OPCFMID
Explanation: The FMID FILEVER of the dataset FILENAME does not match the FMID OPCVER of the code trying
to access the file.
System action: Either the program or Tivoli OPC initialization is terminated.
Tivoli OPC administrator response: Contact your system programmer.
System programmer response: Check that the level of Tivoli OPC matches the level of the file indicated in the
message. Possible explanations include running on backlevel code or a backlevel dataset. Correct the errors and
restart either Tivoli OPC or the program.
EQQZ191E THE CHECKPOINT DATA SET, DDNAME EQQCKPT, COULD NOT BE OPENED
Explanation: The subsystem task module, EQQMAJOR, could not open the checkpoint dataset, which is a required
dataset for Tivoli OPC.
System action: Tivoli OPC initialization is terminated.
Tivoli OPC administrator response: Contact your system programmer.
System programmer response: Check that ddname EQQCKPT is correctly specified and the Tivoli OPC started
task is authorized to open the dataset for updating. Correct the errors and restart Tivoli OPC.
EQQZ192E THE VERSION FILEVER OF DATASET FILENAME DOESN'T MATCH OPC CODE VERSION OPCVER
Explanation: The version FILEVER of the dataset FILENAME does not match the version OPCVER of the code
trying to access the file.
System action: Either the program or Tivoli OPC initialization is terminated.
Tivoli OPC administrator response: Contact your system programmer.
System programmer response: Check that the level of Tivoli OPC matches the level of the file indicated in the
message. Possible explanations include running on backlevel code or a backlevel dataset. Correct the errors and
restart either Tivoli OPC or the program.

488

Tivoli OPC Messages and Codes

EQQZ200I EQQZ202I

| EQQZ200I OPC OPCTYP SSNAME HEARTBEAT
Explanation: This message is sent by OPC at startup or as result of an OPC "heartbeat" command, to state that
OPC is active and running.

System action: If the OPC instrumentation for GEM is active, this message is translated by NetView into a
Heartbeat event and is sent to GEM. When GEM receives this message, it adds an icon for this component in the
Job Scheduling view on the GEM console.
System programmer response: None.

| EQQZ201I OPC OPCTYP SSNAME : STATUS
Explanation: Displays the status of an OPC subsystem.

One of the following values:
CONTROLLER
If the subsystem is an OPC controller.
STANDBY
If the subsystem is a standby controller.
TRACKER
If the subsystem is an OPC MVS tracker.
The name of the OPC subsystem.
One of the following values:
FULLY_OPERATIONAL
The subsystem is working correctly.
PARTIALLY_OPERATIONAL
The subsystem has limited functionality, for example, ER is not active.
Therefore a controller can still schedule jobs, but cannot receive their
status.
NOT_OPERATIONAL
Some core OPC functionality is not active, for example, a controller is
not able to execute a plan or to submit a job.

System action: If the OPC instrumentation for GEM is active, this message is translated into a Monitor Threshold
event and sent to GEM, which updates the Job Scheduling view correctly on the APM console.
Tivoli OPC administrator response: If the OPC STATUS is not FULLY_OPERATIONAL, one or more of the OPC
subtasks is inactive or is not working properly. Depending on the inactive tasks, the status can assume the values
PARTIALLY_OPERATIONAL or NOT_OPERATIONAL. Message EQQZ202I lists the inactive OPC subtasks, which
you should restart.

| EQQZ202I FOLLOWING SUBTASKS ARE INACTIVE: TASKLST
Explanation: Lists the names of the OPC subtasks that are inactive. If the OPC status is not
FULLY_OPERATIONAL, this message is always issued in conjunction with message EQQZ201I.
System action: Normal processing continues.
Tivoli OPC administrator response: Restart the correct OPC subtask.

Chapter 36. EQQZnnn Messages

489

EQQZ203I EQQZ204I

| EQQZ203I TRKTYPE TRACKER TRKNAME : TRKADDR TRKSTAT
Explanation: Provides information about the status of a tracker connected to an OPC controller.

|
|
|
|
|
|
|
|
|
|
|

TRKTYPE

TRKNAME
TRKADDR
TRKSTAT

The type of tracker. It can be one of the following values:
SNA
XCF
DASD
TCP
USER
APPC
HOME
The name of the OPC destination associated with that tracker.
The TCP/IP or SNA address associated with that tracker.
The status of the tracker. It can be one of the following values:
ONLINE
OFFLINE

System action: If the OPC instrumentation for GEM is active, this message is translated into a Monitor Threshold
event and sent to GEM, which updates the Job Scheduling view correctly on the APM console.
Tivoli OPC administrator response: If the status of a connected tracker is offline, either the tracker is not running
or the connection is down. Restart the tracker or wait for the tracker to reestablish the connection.

| EQQZ204I SSNAME TRKTYPE TRACKER TRKNAME : TRKADDR HEARTBEAT
Explanation: This message is sent by OPC at startup or as a result of a STATUS,TRK OPC command, to state that
an OPC tracker defined to this controller is active and running.

|
|
|
|
|
|
|
|
|
|

SSNAME
TRKTYPE

TRKNAME
TRKADDR

The name of the OPC subsystem.
The type of tracker. It can be one of the following values:
SNA
XCF
DASD
TCP
USER
APPC
The name of the OPC destination associated with that tracker.
The TCP/IP or SNA address associated with that tracker.

System action: If the OPC instrumentation for GEM is active, this message is translated by NetView into a
Heartbeat event for the Tracker and is sent to GEM. When GEM receives this message, it updates the Job
Scheduling view in the APM server with a new component for this tracker and a new link with the related OPC
controller.
System programmer response: None.

490

Tivoli OPC Messages and Codes

EQQZ205I EQQZ207I

| EQQZ205I TRKTYPE TRACKER TRKNAME : TRKADDR NOT FOUND
Explanation: This message is sent by OPC as result of a STATUS,TRK OPC command, when the tracker name (or
tracker address) is not defined to the controller in the ROUTOPTS initialization statements.

The type of tracker. It can be one of the following values:
SNA
XCF
DASD
TCP
USER
APPC
The name of the OPC destination associated with that tracker.
The TCP/IP or SNA address associated with that tracker.

System action: Normal processing continues.
Tivoli OPC administrator response: Specify the correct tracker name (or address) in the STATUS,TRK OPC
command.

| EQQZ206I SSNAME TRKTYPE TRACKER TRKNAME : TRKADDR TRKSTAT
Explanation: Provides information about the status of a tracker connected to this controller.

|
|
|
|
|
|
|
|
|
|
|
|
|

SSNAME
TRKTYPE

TRKNAME
TRKADDR
TRKSTAT

System programmer response: If the OPC instrumentation for GEM is active, this message is translated by
NetView into a Connection Change event for the tracker and is sent to GEM. When GEM receives this message, it
updates the Job Scheduling view in the APM Server by removing or creating the link between the tracker and the
related OPC controller.
Tivoli OPC administrator response: If the status of a connected tracker is offline, either the tracker is not running
or the connection is down. Restart the tracker or wait for the tracker to reestablish the connection.

| EQQZ207I TASKNAM IS STATUS
Explanation: Displays the status of the specified OPC subtask.

| TASKNAM
| STATUS

The name of the OPC subtask.
The status of the OPC subtask:
ACTIVE
The OPC subtask is running.
INACTIVE
The OPC subtask is not running.

System action: Normal processing continues.
Tivoli OPC administrator response: None.

Chapter 36. EQQZnnn Messages

491

EQQZ208I EQQZ212I

| EQQZ208I DDNAME LAST-RC= LASTRC
Explanation: Provides the return code of the last I/O operation on the specified DDNAME.

| DDNAME
| LASTRC

The ddname of the OPC dataset.
The return code of the last I/O operation. It can be one of the following values:
NORMAL
WARNING
SEVERE
CRITICAL
UNKNOWN

System action: Depending on the return code value and on the specified DDNAME, OPC could stop some of its
subtasks.
Tivoli OPC administrator response: If the LASTRC value is other than NORMAL or WARNING, and depending on
the DDNAME value, some of the OPC functions could not work correctly. In this case, check the status of the
physical sequential or VSAM dataset associated with DDNAME.

| EQQZ209I OPNUM OPDESC FOR TRACKER TRKNAM
Explanation: Displays the number of operations that have been completed or ended in error for the specified tracker.

The number of operations that completed or ended in error.
The description of the operations. It can be one of the following values:
COMPLETED_OPERATIONS
The number of operations that completed successfully on that
destination.
IN_ERROR_OPERATIONS
The number of operations that ended in error on the specified tracker.
The name of the tracker.

| EQQZ210I SSNAME EQQEVDS ERRCODE ERROR : ERRMSG
Explanation: An error occurred in the event dataset.

| SSNAME

The name of the OPC subsystem.

| ERRCODE

The code of the error. It can be either SEVERE or FATAL.

| ERRMSG

The cause of the error. It can be either “an I/O error” or “unable to open the file.”

System action: Depending on the ERRCODE value, some of the OPC functions could not work correctly.
Tivoli OPC administrator response: Check the status of the event dataset.

| EQQZ212E ARM OPERATION (RET CODE: RTC, RSN CODE: RSC)
| Explanation: The automatic restart management (ARM) OPERATION has ended in error.
| System action: The ARM operation is not completed.
| User response: Contact your system administrator.
| EQQZ212I ARM OPERATION (RET CODE: RTC, RSN CODE: RSC)
| Explanation: The automatic restart management (ARM) OPERATION has completed.
| System action: The ARM operation has completed.
| User response: If RTC is 04, contact your system administrator.

492

Tivoli OPC Messages and Codes

EQQZ213W EQQZ304E

| EQQZ213W THE THRESHOLD MUST BE IN THE RANGE FROM 0 TO 100
|
|
|
|
|

Explanation: The threshold value is used with the conditional policy (specified in the WLM statement as SMART). If
a job has not yet reached its deadline, the job considers the time remaining before the deadline. If the remaining time
is long enough compared with the interval between the latest start time and the start time, no WLM request for
promotion is issued. If you want to try and apply the Deadline and Latest Start Time policies in a row, you should
specify a threshold value equal to 0.

Explanation: The OPCOPTS DSTTASK was set to YES, but the JOBLOGRETRIEVAL was set to a value different
from DELAYEDDST. This is not allowed because either all of the Trackers (including the one in the same address
space as the Controller) must use the Tivoli OPC Data Store or none of them should use it. Mixed configurations are
not supported.

| System action: Tivoli OPC initialization fails and the subsystem terminates.
| User response: None
| System programmer response: Set DSTTASK (NO) or JOBLOGRETRIEVAL (DELAYEDDST), depending on
| whether or not the Tivoli OPC Data Store is to be used.
| EQQZ301E OPC DATA STORE NEEDS DSTCLASS
| Explanation: JOBLOGRETRIEVAL was set to DEALAYEDDST, but DSTCLASS was not specified.
| System action: Tivoli OPC initialization fails and the subsystem terminates.
| User response: None
| System programmer response: Set DSTCLASS as appropriate to the Tivoli OPC Data Store reserved class.
| EQQZ302E OPC DSTCLASS CAN NOT BE SPECIFIED IN CHKCLASS
| Explanation: JCCOPTS CHKCLASS contained the DSTCLASS value. This is not allowed because the Tivoli OPC
| Data Store class is reserved.
| System action: None
| User response: None
| System programmer response: Remove the DSTCLASS value from CHKCLASS.
| EQQZ303W FL TASK NOT STARTED: FLOPTS WILL BE IGNORED
| Explanation: The FL task is not to be started (DSTTASK=NO), but FLOPTS was specified.
| System action: FLOPTS is ignored.
| Tivoli OPC administrator response: Check whether DSTTASK was intentionally set to NO.
| EQQZ304E FL TASK NEEDS ARCHOPTS
| Explanation: The FL task is to be started (DSTTASK=YES), but FLOPTS was not specified.
| System action: The FL task is not started.
| Tivoli OPC administrator response: Check whether or not the FL task should be started and, if so, specify
| FLOPTS.

Chapter 36. EQQZnnn Messages

493

EQQZ305W EQQZ308E

| EQQZ305W OPC OPC DATA STORE IS USED: CATMCLASS, CATMDISP, MAXNUMUSYS WILL BE IGNORED
| Explanation: The JCC was started for both completion checker function and the Tivoli OPC Data Store requeue
| (JCCTASK (YES) and JOBLOGRETRIEVAL (DELAYEDDST)). This message identifies the parameters in JCCOPTS
| that are not meaningful in this situation.
| System action: None.
| User response: None.
| System programmer response: None.
| EQQZ306E OPC DATA STORE NEEDS JCC TASK
| Explanation: The JCC was not started, but JOBLOGRETRIEVAL is DELAYEDDST. This is not allowed because the
| Tivoli OPC Data Store needs a minimum of a dummy JCC to work (JCCTASK (DST)).
| System action: Tivoli OPC initialization fails and the subsystem terminates.
| User response: None.
| System programmer response: Set JCCTASK to YES or DST.
| EQQZ307I OPC DATA STORE IS REQUIRED IF JCCTASK IS SET TO DST
| Explanation: The JCC was started as a dummy JCC (JCCTASK DST), but JOBLOGRETRIEVAL was not set to
| DELAYEDDST. This is not allowed because a dummy JCC is meaningful only if the Tivoli OPC Data Store is used.
| System action: Tivoli OPC initialization fails and the subsystem terminates.
| User response: None.
| System programmer response: Correct the JCCTASK or JOBLOGRETRIEVAL statement.
| EQQZ308E FL TASK IS NOT STARTED - YOU CAN NOT USE OPC DATA STORE
| Explanation: DSTTASK was not set to YES so the FL task was not started, but a connected Tracker seems to be
| using the Tivoli OPC Data Store. This means that the sysout of the jobs run on that Tracker cannot be retrieved.
| System action: None.
| User response: None.
| System programmer response: Stop the Controller and correct the configuration.

494

Tivoli OPC Messages and Codes

EQQ0014E EQQ0020E

Chapter 37. EQQnnnn Messages
EQQ0014E DBCS FORMAT SPECIFIED BUT ADID NOT VALID BRACKETED DBCS: NAME
Explanation: The application ID NAME is specified to be in DBCS format, that is, it must start with a shift-out
character (X'0E') and end with a shift-in character (X'0F'). Either the shift-out or the shift-in character, or both, are
missing.
System action: Processing is terminated.
User response: Correct the error and resubmit the job.
EQQ0015W DBCS FORMAT SPECIFIED BUT INPUT NOT VALID BRACKETED DBCS: NAME
Explanation: The application ID NAME is specified to be in DBCS format, that is, it must start with a shift-out
character (X'0E') and end with a shift-in character (X'0F'). Either the shift-out or the shift-in character, or both, are
missing.
System action: The failing operator instruction is rejected.
User response: Correct the error and resubmit the job or use the Tivoli OPC dialog to submit the job.
EQQ0016E ITEM TOO SHORT: NAME
Explanation: The application ID NAME has an invalid syntax.
System action: If the error is detected during batch processing of operator instructions, the failing instruction is
rejected. If the error is detected during long-term planning, the job is terminated.
User response: Correct the error and resubmit the job or use the Tivoli OPC dialog to submit the job.
EQQ0017E FIRST CHARACTER NOT ALPHABETIC IN NAME: NAME
Explanation: The application ID NAME has an invalid syntax. The first character in NAME must be an alphabetic
character.
System action: If the error is detected during batch processing of operator instructions, the failing instruction is
rejected. If the error is detected during long-term planning, the job is terminated.
User response: Correct the error and resubmit the job or use the Tivoli OPC dialog to submit the job.
EQQ0018E INVALID ALPHABETIC CHARACTER : NAME
Explanation: The character displayed in the message is not a valid alphabetic character.
System action: If the error is detected during batch processing of operator instructions, the failing instruction is
rejected. If the error is detected during long-term planning, the job is terminated.
User response: Correct the error and resubmit the job or use the Tivoli OPC dialog to submit the job.
EQQ0019W INVALID NUMERIC : NUMBER

IN SEQ FILE

Explanation: When processing sequential operator instruction files, an invalid digit appears in NUMBER.
System action: The failing operator instruction is rejected and correct instructions are accepted.
User response: Correct the error and resubmit the job or use the Tivoli OPC dialog to submit the job.
EQQ0020E INVALID YEAR IN DATE : DATE
Explanation: The value for year in the SYSIN statement of the batch program is incorrect. Year must be a number
in the range 00 to 99.
System action: The job is terminated.
User response: Correct the year and resubmit the job or use the Tivoli OPC dialog to submit the job.

495

EQQ0021E EQQ0027I

EQQ0021E INVALID MONTH IN DATE : DATE
Explanation: The batch program has an incorrect SYSIN statement, most likely because the batch program was not
submitted using the dialog. The month is invalid in DATE.
System action: The job is terminated.
User response: Correct the error and resubmit the job or use the Tivoli OPC dialog to submit the job.
EQQ0022E INVALID DAY IN DATE : DATE
Explanation: The batch program has an incorrect SYSIN statement, most likely because the batch program was not
submitted using the dialog. The day is invalid in DATE.
System action: The job is terminated.
User response: Correct the error and resubmit the job or use the Tivoli OPC dialog to submit the job.
EQQ0023E INVALID HOUR IN TIME : TIME
Explanation: The batch program has an incorrect SYSIN statement, most likely because the batch program was not
submitted using the dialog. The hour is invalid in TIME.
System action: The job is terminated.
User response: Correct the error and resubmit the job or use the Tivoli OPC dialog to submit the job.
EQQ0024E INVALID MINUTE IN TIME : TIME
Explanation: The batch program has an incorrect SYSIN statement, most likely because the batch program was not
submitted using the dialog. The minute is invalid in TIME.
System action: The job is terminated.
User response: Correct the error and resubmit the job or use the Tivoli OPC dialog to submit the job.
EQQ0025E VALID RANGE FOR TIME IS 00.00 - 24.00 : TIME
Explanation: The batch program has an incorrect SYSIN statement, most likely because the batch program was not
submitted using the dialog. The time specified is outside the valid range for time.
System action: The job is terminated.
User response: Correct the error and resubmit the job or use the Tivoli OPC dialog to submit the job.
EQQ0026E VALID RANGE FOR DURATION IS 00.00 - 99.59 : EXTVAL
Explanation: The batch program has an incorrect SYSIN statement, most likely because the batch program was not
submitted using the dialog.
System action: The job is terminated.
User response: Correct the error and resubmit the job or use the Tivoli OPC dialog to submit the job.
EQQ0027I INCORRECT ARGUMENT VALUE IN PIF REQUEST: VAL
Explanation: The argument value, time, specified in the PIF request is not correct. Time should be specified as
hours and minutes in the format HHMM, where HHMM has the following values:
HH
MM
HHMM

A number in the range 00–24
A number in the range 00–59
A number not greater than 2400

System action: If the time argument includes a comparative operator (>, <, ¬), processing continues.
User response: Check all time values in your PIF application, correct, and rerun if necessary.

496

Tivoli OPC Messages and Codes

EQQ0100E EQQ0183W

EQQ0100E APPLICATION DESCRIPTION DATA SET IN USE, TRY LATER
Explanation: You have attempted to access the application description dataset, but it is being used by another user.
System action: The job is terminated.
User response: Try again later.
EQQ0105W APPLICATION DESCRIPTION ADID NOT FOUND
Explanation: You have attempted to read the application description ADID, but this application description ID does
not exist in the application description database.
System action: The job continues processing.
User response: Enter an existing application description ID or use the Application Description dialog to create a new
application description, and resubmit the job. If the message was issued from a batch job, create the application
description, and resubmit the job.
EQQ0170W APPL: APPL - VALIDATION FAILED. REASON REASON, POSITION POSITION
Explanation: During mass update of the application description database, the changes that were made have caused
application description APPL to become invalid. REASON indicates the reason why validation of the application
description failed. and POSITION indicates the failing position in hexadecimal form within the record.
System action: APPL is not updated. The job continues with the next application description.
User response: Analyze the reason for the error. (See Chapter 39, “Reason Codes” on page 539 for a list of the
reason codes and their meanings.) If necessary, use the Application Description dialog to correct the application
description.
EQQ0172W APPL: APPL - PREDECESSOR OPID NOT FOUND
Explanation: The internal predecessor OPID could not be found for the application description APPL.
System action: The application description APPL is not activated. The daily planning program continues processing,
but without planning this application. The job continues processing, but without planning this application.
User response: Use the Application Description dialog to check and correct the dependencies between operations.
EQQ0175W APPL: APPL - OPERATION OPID IS ISOLATED FROM OTHER OPS IN NET
Explanation: There is more than one network. This is not allowed.
System action: The application description APPL is not activated. The daily planning program continues processing,
but without planning this application. The job continues processing, but without planning this application.
User response: Use the Application Description dialog to check and correct the dependencies between operations.
EQQ0176W APPL: APPL - OPERATION OPID IS INVOLVED IN A DEPENDENCY LOOP
Explanation: There is a dependency loop in the network. This message is issued for all operations involved in the
dependency loop and for all operations preceding the loop.
System action: The application description APPL is not activated. The daily planning program continues processing,
but without planning this application. The job continues processing, but without planning this application.
User response: Use the Application Description dialog to check and correct the dependencies between operations.
EQQ0183W APPL: APPL - PREP OP OPID HAS NO SUCCEEDING CPU OP
Explanation: You have specified an operation at a workstation that uses the job setup function, but the operation
OPID does not have an immediately succeeding processor operation with the same job name.
System action: The application description APPL is not activated. The daily planning program continues processing,
but without planning this application.
User response: Use the Application Description dialog to check and correct the dependencies between operations.

Chapter 37. EQQnnnn Messages

497

EQQ0196E EQQ0303E

EQQ0196E ERRORS ENCOUNTERED WHILE SORTING
Explanation: Errors were encountered from the sort program.
System action: The job is terminated.
User response: Contact your system programmer.
System programmer response: Check the sort program messages to determine the cause of the error. Correct the
errors and resubmit the job.
EQQ0300E LTP DATA SET IN USE - TRY LATER
Explanation: The long-term plan dataset is being used by another Tivoli OPC function.
System action: The job is terminated.
User response: Try again later.
EQQ0301E PERIOD START SDATE STIME >= PERIOD END EDATE ETIME
Explanation: The batch program has an incorrect SYSIN statement, most likely because the batch program was not
submitted using the dialog. The end of the planning period must be later than the start of the period.
System action: The daily planning program is terminated.
User response: Correct the error and resubmit the job or use the Tivoli OPC dialog to submit the job.
EQQ0302E PERIOD SDATE STIME - EDATE ETIME OUTSIDE LONG TERM PLAN
Explanation: The batch program has an incorrect SYSIN statement, most likely because the batch program was not
submitted using the dialog. The planning period SDATE STIME - EDATE ETIME is outside the current range of the
long-term plan.
System action: The daily planning program is terminated.
User response: Correct the error and resubmit the job or use the Tivoli OPC dialog to submit the job.
EQQ0303E SPECIFIED PARAMETER FIELD TOO SHORT
Explanation: The batch program has an incorrect SYSIN statement, most likely because the batch program was not
submitted using the dialog. The parameter field is shorter than the required length.
System action: The job is terminated.
User response: Correct the error and resubmit the job, or use the Tivoli OPC dialog to submit the job.

498

Tivoli OPC Messages and Codes

EQQ0304E EQQ0308E

| EQQ0304E OLD CP MIGHT BE WRONG, CP BACKUP DID NOT COMPLETE NORMALLY
Explanation: The last backup of the active current plan to the backup current plan failed. The current plan input to
daily planning could therefore be incomplete or out-of-date.
System action: The daily plan batch process terminates.
Problem determination: Review the controller message log (EQQMLOG), to determine why the current plan backup
process failed. If the Tivoli OPC backup process failed due to an open error, the reason could be that another job
was using the file.
User response: If there is no error indication in the controller message log, make sure that the daily planning job is
executed on the same MVS system where the controller is started or on an MVS system in the same GRS ring. In
the BATCHOPT statement, use the CHECKSUBSYS keyword to ensure that the batch job is not started unless it can
communicate with the controller via an ENQ lock. If an error has caused the controller to terminate before completing
the backup process, solve that error and restart the controller before attempting to rerun the failed daily planning
processing.
The following solution should be used only if the controller cannot be restarted successfully. When the daily planning
job is submitted with CHECKSUBSYS(NO) specified in the BATCHOPT statement, the validity check causing this
message is bypassed. The active current plan is used as input to daily planning instead of the backup plan. Make
sure that the value for CHECKSUBSYS is reset to YES when the daily planning job completes.
EQQ0305W PRE OP TO ******** IN APPL **************** ******** **.** NOT FOUND
Explanation: An external predecessor to the operation OPERATION for the application description APPL does not
exist in the application description database.
System action: The dependency is ignored. The daily planning program continues processing.
User response: Use the Application Description and the Long-Term Planning dialogs to verify and correct the
dependencies.
EQQ0306W WORKSTATION **** IN OPERATION **************** *** IS UNDEFINED
Explanation: An operation (OPERATION) is defined for a workstation (WS) that does not exist.
System action: The daily planning program continues processing, but without planning this application.
User response: Use the Application Description dialog to verify and correct the operations or use the Workstation
Description dialog to add the workstation description to the workstation description database.
EQQ0307W APPL **************** ******** **.** TOO OLD - NOT IN CURRENT PLAN
Explanation: An occurrence in the long-term plan dataset or an undecided occurrence in the old current plan
dataset, which has a deadline previous to the latest backup time, is assumed to be completed.
System action: The occurrence is marked completed in the long-term plan dataset except in the trial plans. The
daily planning program continues processing.
User response: If the occurrence should be included in the current plan, use the Modify Current Plan dialog to add
the occurrence.
EQQ0308E NO FIRST AND/OR LAST OPERATION IN APPLICATION NETWORK
Explanation: No first or last, or both, operations was found in the application network, probably because there is a
loop between operations. This message is issued together with message EQQ0309E, which lists the applications
involved in a dependency loop.
System action: No new current plan is produced, but a printed plan is produced. The job is terminated.
User response: Check the involved applications for dependency loops at the operation level. Use the Application
Description dialog to correct the dependency data or use Long-Term Planning dialog to delete the occurrences from
the long-term plan.

Chapter 37. EQQnnnn Messages

499

EQQ0309E EQQ0313E

EQQ0309E

APPL **************** ******** **.** INVOLVED IN DEPENDENCY LOOP

Explanation: This message is issued together with message EQQ0308E. It lists the applications involved in a
dependency loop.
System action: No new current plan is produced, but a printed plan is produced. The job is terminated.
User response:

See message EQQ0308E.

EQQ0310E SUBSYSTEM SUBSYS NOT ACTIVE OR NOT REACHED
Explanation: The BATCHOPT statement specifies that the daily plan is to be produced for an active subsystem
defined by the keyword CHECKSUBSYS. However the subsystem cannot be reached by the daily planning program.
System action: The daily planning program is terminated.
User response: Check that the correct subsystem name is specified in the keyword SUBSYS of the BATCHOPT
statement.
If the subsystem is stopped, the daily planning program can be executed after specifying CHECKSUBSYS(NO) in the
BATCHOPT statement.
If the subsystem is active, make sure that the daily planning program is executed either on the same processor or on
a processor connected via GRS to the processor where the subsystem is executing.
If CHECKSUBSYS(NO) is specified, ensure the keyword is reset before starting the next daily plan for an active
subsystem.
EQQ0311E DAILY PLAN PERIOD START DAY AND TIME MUST BE SPECIFIED
Explanation: When no current plan exists, you must specify the period start date and time.
System action: The daily planning program is terminated.
User response: Enter start date and time.
EQQ0312E PERIOD LENGTH IS GREATER THAN 21 DAYS
Explanation: A daily plan period must not extend beyond 21 days. Either the SYSIN parameters were specified
outside the Tivoli OPC dialog or an extension length was specified in work days, and calculated elapsed time exceeds
21 days.
System action: The daily planning program is terminated.
User response: Use the Daily Planning dialog to correct the parameters or to reduce the extension length, or use
the Tivoli OPC dialog to submit the job.
EQQ0313E NO CURRENT PLAN EXISTS
Explanation: Daily planning requires an old current plan dataset as input, but that dataset does not exist.
System action: The daily planning program is terminated.
User response: Extend the current plan period before using any daily planning function that requires an old current
plan as input.

500

Tivoli OPC Messages and Codes

EQQ0314E EQQ0319E

EQQ0314E WRONG OLD CURRENT PLAN SELECTED AS INPUT
Explanation: The old current plan dataset used as input when extending or replanning the current plan period is not
the correct dataset. The dataset may have been restored from a backup copy.
System action: The daily planning program is terminated.
User response: Make sure that the daily planning batch JCL is referring to the same current plan and long-term plan
data sets as the controller subsystem. If you have restored the current plan incorrectly, set the CURRPLAN(NEW)
keyword in the JTOPTS statement and restart the Tivoli OPC controller to restore the current plan from the new
current plan dataset.
Refer to Tivoli OPC Customization and Tuning for information about restoring Tivoli OPC datasets. Resubmit the daily
planning batch job when the error has been corrected.
EQQ0315E WORK STATION WSN DOES NOT EXIST
Explanation: The workstation WSN, which has work planned for it in the current plan, has been deleted from the
workstation description database.
System action: The daily planning program is terminated.
User response: Use the Workstation Description dialog to create the workstation description. Use the Daily
Planning dialog to resubmit the job.
EQQ0316E WORK STATION WSN TYPE HAS BEEN CHANGED
Explanation: The workstation WSN type in the workstation description database has been changed for a workstation
that is part of the current plan.
System action: The daily planning program is terminated.
User response: Use the Workstation Description dialog to change the workstation type to its previous value. Use
the Daily Planning dialog to resubmit the job.
EQQ0317W APPLICATION **************** ******** DOES NOT EXIST
Explanation: An application occurrence has been read in the long-term plan dataset, but there is no valid application
description.
System action: The application is not included in the daily plan and the application occurrence is marked deleted in
the long-term plan dataset. The daily planning program continues processing.
User response: Use the Application Description dialog to create the application description or to change the
validation period. Use the Modify Current Plan dialog to add the application occurrence to the current plan.
EQQ0318E PERIOD START SDATE STIME CANNOT BE CHANGED
Explanation: The period start date and time cannot be changed when extending the current plan period.
System action: The daily planning program is terminated.
User response: Use the Daily Planning dialog to get the correct start period value and resubmit the job.
EQQ0319E WRONG LTP DATA SET SELECTED AS INPUT
Explanation: The long-term plan dataset used as input when extending or replanning the current plan period is not
the correct dataset. The dataset may have been restored from a backup copy.
System action: The daily planning program is terminated.
User response: Make sure that the daily planning batch JCL is referring to the same current plan and long-term plan
datasets as the controller subsystem. If you have restored the long-term plan incorrectly, restore it from the
EQQLTBKP dataset.
Refer to Tivoli OPC Customization and Tuning for information about restoring Tivoli OPC datasets. Resubmit the daily
planning batch job when the error has been corrected.

Chapter 37. EQQnnnn Messages

501

EQQ0320E EQQ0324W

EQQ0320E THE OPC STATUS RECORD CONTAINS INCORRECT VALUES
Explanation: The OPC status record (in the checkpoint dataset) does not contain the value that the daily planning
program expects when the backup completion signal is received. The dataset may have been restored from a backup
copy.
System action: The daily planning program is terminated.
User response: Resubmit the daily planning program.
EQQ0321W START DATE/TIME ENTERED IGNORED. CURRENT PLAN END DATE/TIME IS USED
Explanation: A start date and time was entered when running a trial extend of the current plan. The start date and
time is ignored and replaced by the current plan end date and time.
System action: The trial daily planning program continues processing.
User response: None.
EQQ0322E NO WS OPEN TIMES FOR PERIOD ******** **.** - ******** **.**
Explanation: All workstations are closed during the period START – END.
System action: The daily planning program is terminated.
User response: Use the Workstation Description dialog or the Calendar dialog to update the open intervals.
EQQ0323W WS ACTIVITY REPORT OPTION MUST BE 0 OR 1 - SET TO 1
Explanation: The batch program has an incorrect SYSIN statement, most likely because the batch program was not
submitted using the dialog.
The workstation activity report options are:
0
1

For workstation activity report not required
For workstation activity report required.

System action: The value is set to 1 and the daily planning program continues processing.
User response: Change the parameter value for the workstation activity report option to 0 or 1 in the SYSIN
statement for the daily planning program.
EQQ0324W DAILY OP PLAN REPORT OPTION MUST BE 0 OR 1 - SET TO 1
Explanation: The batch program has an incorrect SYSIN statement, most likely because the batch program was not
submitted using the dialog.
The daily operation plan report options are:
0
1

For daily operating plan report not required
For daily operating plan report required.

System action: The value is set to 1 and the daily planning program continues processing.
User response: Change the parameter value for the daily operating plan report option to 0 or 1 in the SYSIN
statement for the daily planning program.

502

Tivoli OPC Messages and Codes

EQQ0325W EQQ0329E

EQQ0325W ALL WS PLAN REPORT OPTION MUST BE 0 OR 1 - SET TO 1
Explanation: The batch program has an incorrect SYSIN statement, most likely because the batch program was not
submitted using the dialog.
The all workstation plan report options are:
0
1

For all workstation plan report not required
For all workstation plan report required.

System action: The value is set to 1 and the daily planning program continues processing.
User response: Change the parameter value for the all workstation plan report option to 0 or 1 in the SYSIN
statement for the daily planning program.
EQQ0326W INPUT ARR LIST REPORT OPTION MUST BE 0 OR 1 - SET TO 1
Explanation: The batch program has an incorrect SYSIN statement, most likely because the batch program was not
submitted using the dialog.
The input arrival list report options are:
0
1

For input arrival list report not required
For input arrival list report required.

System action: The value is set to 1 and the daily planning program continues processing.
User response: Change the parameter value for the input arrival list report option to 0 or 1 in the SYSIN statement
for the daily planning program.
EQQ0327W NON-REP WS PLAN REPORT OPTION MUST BE 0 OR 1 - SET TO 1
Explanation: The batch program has an incorrect SYSIN statement, most likely because the batch program was not
submitted using the dialog.
The nonreporting workstation plan report options are:
0
1

For nonreporting workstation plan report not required
For nonreporting workstation plan report required.

System action: The value is set to 1 and the daily planning program continues processing.
User response: Change the parameter value for the non-reporting workstation plan report option to 0 or 1 in the
SYSIN statement for the daily planning program.
EQQ0328W CURRENT PLAN REPORT OPTION MUST BE 0 OR 1 - SET TO 1
Explanation: The batch program has an incorrect SYSIN statement, most likely because the batch program was not
submitted using the dialog.
The current plan report options are:
0
1

For current plan reports not required
For current plan reports required.

System action: The value is set to 1 and the daily planning program continues processing.
User response: Change the parameter value for the current plan report option to 0 or 1 in the SYSIN statement for
the daily planning program.
EQQ0329E A NEW CURRENT PLAN ALREADY EXISTS
Explanation: A new current plan dataset, created by a previous daily planning run, is not yet processed by Tivoli
OPC.
System action: The daily planning program is terminated.
User response: If it is not already started, start Tivoli OPC and use the Daily Planning dialog to resubmit the job.

Chapter 37. EQQnnnn Messages

503

EQQ0330W EQQ0334W

EQQ0330W PLANNED RESOURCE UTILIZATION REPORT OPTION MUST BE 0 OR 1 - SET TO 1
Explanation: The batch program has an incorrect SYSIN statement, most likely because the batch program was not
submitted using the dialog.
The planned resource utilization report options are:
0
1

For planned resource utilization report not required
For planned resource utilization report required

System action: The value is set to 1 and the daily planning program continues processing.
User response: Change the parameter value for the planned resource utilization report option to 0 or 1 in the SYSIN
statement for the daily planning program.
EQQ0331W ACTUAL RESOURCE UTILIZATION REPORT OPTION MUST BE 0 OR 1 - SET TO 1
Explanation: The batch program has an incorrect SYSIN statement, most likely because the batch program was not
submitted using the dialog.
The actual resource utilization report options are:
0
1

For actual resource utilization report not required
For actual resource utilization report required

System action: The value is set to 1 and the daily planning program continues processing.
User response: Change the parameter value for the actual resource utilization report option to 0 or 1 in the SYSIN
statement for the daily planning program.
EQQ0332W NO DEP IN **************** ******** **.**, **************** ******** **.**
Explanation: No external dependency has been found between operations in the occurrences OCCURRENCE and
OCCURRENCE as defined in the application description database and in the default rules. This message is followed
by message EQQ0333W or EQQ0334W.
System action: The two specified occurrences are planned without dependencies.
User response: Use the Application Description dialog to verify and correct the dependency or use the Modify
Current Plan dialog to add the dependency to the current plan, or use both dialogs.
EQQ0333W NO DEFAULT SUCC OP FOUND IN APPL **************** ******** **.**
Explanation: No default successor operation, as defined in the installation options, has been found for the
application APPL.
System action: The daily planning program continues processing.
User response: Use the Application Description dialog to verify and correct the dependency or use the Modify
Current Plan dialog to add the dependency to the current plan, or use both dialogs. Or, contact your system
programmer.
System programmer response: If a dependency is required, try to change the default successor operation in the
installation option.
EQQ0334W NO DEFAULT PRED OP FOUND IN APPL **************** ******** **.**
Explanation: No default predecessor operation, as defined in the installation options, has been found for the
application APPL.
System action: The daily planning program continues processing.
User response: Use the Application Description dialog to verify and correct the dependency or use the Modify
Current Plan dialog to add the dependency to the current plan, or use both dialogs. Or, contact your system
programmer.
System programmer response: If a dependency is required, try to change the default predecessor operation in the
installation option.

504

Tivoli OPC Messages and Codes

EQQ0335W EQQ0339W

EQQ0335W AUTO WS VERIFICATION FAILED FOR APPL **************** ******** **.**
Explanation: The rules for automatic workstations were not satisfied for the application APPL. This message is
always issued together with one of the messages EQQ0337W through EQQ0341W.
System action: The application in the long-term plan dataset is marked “deleted” when the current plan period is
extended. The application is not included in the new current plan or in the printed plans. The daily planning program
continues processing.
User response: See the message issued together with this message for the required action.
EQQ0336W OP ** IN **************** ****** **** DEFINES OP ** IN **************** ****** **** AS PRED USING
WRONG WS NAME
Explanation: An operation uses the wrong workstation name when defining an operation that belongs to another
application as its predecessor.
System action: The dependency is created to the correct workstation. The daily planning program continues
processing.
User response: Use the Application Description dialog to correct the predecessor definition.
EQQ0337W NOT THE SAME JOB NAME IN OP ******** AND ********
Explanation: An operation at an automatic printer workstation and an operation at an automatic computer
workstation do not have the same job name.
System action: The application in the long-term plan dataset is marked “deleted” when the current plan period is
extended. The application is not included in the new current plan or in the printed plans. The daily planning program
continues processing.
User response: Use the Application Description dialog to update the application description on the application
description database. Use the Modify Current Plan dialog to add the application description to the current plan.
EQQ0338W PRED OP ******** TO PRINT OP ******** NOT ON A CPU WS
Explanation: An automatic printer workstation operation has a predecessor on a workstation that is not an automatic
computer workstation. This is not allowed.
System action: The application in the long-term plan dataset is marked “deleted” when the current plan period is
extended. The application is not included in the new current plan or in the printed plans. The daily planning program
continues processing.
User response: Use the Application Description dialog to update the application description on the application
description database. Use the Modify Current Plan dialog to add the application description to the current plan.
EQQ0339W OP ******** IS NOT AN INT PRED TO PRINT OP ********
Explanation: An automatic printer workstation operation must not have an external predecessor operation.
System action: The application in the long-term plan dataset is marked “deleted” when the current plan period is
extended. The application is not included in the new current plan or in the printed plans. The daily planning program
continues processing.
User response: Use the Application Description dialog to update the application description on the application
description database. Use the Modify Current Plan dialog to add the application description to the current plan.

Chapter 37. EQQnnnn Messages

505

EQQ0340W EQQ0345W

EQQ0340W PRINT OP ******** HAS NO PREDECESSORS
Explanation: An automatic printer workstation operation has no predecessors.
System action: The application in the long-term plan dataset is marked “deleted” when the current plan period is
extended. The application is not included in the new current plan or in the printed plans. The daily planning program
continues processing.
User response: Use the Application Description dialog to update the application description on the application
description database. Use the Modify Current Plan dialog to add the application description to the current plan.
EQQ0341W PRINT OP ******** HAS MORE THAN ONE PREDECESSOR
Explanation: An automatic printer workstation operation has more than one internal predecessor. This is not
allowed.
System action: The application in the long-term plan dataset is marked “deleted” when the current plan period is
extended. The application is not included in the new current plan or in the printed plans. The daily planning program
continues processing.
User response: Use the Application Description dialog to update the application description on the application
description database. Use the Modify Current Plan dialog to add the application description to the current plan.
EQQ0342W JOBNAME SHOULD BE GIVEN FOR PREP OP ********
Explanation: An operation on a workstation using the Tivoli OPC job setup facility must have a job name to combine
it with a computer operation in the same application.
System action: This application cannot be used in job tracking and is not added to the current plan.
User response: Use the Application Description dialog to update the application description on the application
description database. Use the Modify Current Plan dialog to add the application description to the current plan.
EQQ0343W PREP OP ******** HAS JOBNAME ********.NO SUCC CPU OP HAS IT
Explanation: An operation on a workstation using the Tivoli OPC job setup facility must have a job name to combine
it with a computer operation in the same application. A preparation (job setup) operation is found, but no
corresponding computer operation immediately succeeding it is found.
System action: This application cannot be used in job tracking and is not added to the current plan.
User response: Use the Application Description dialog to update the application description on the application
description database. Use the Modify Current Plan dialog to add the application description to the current plan.
EQQ0344E INVALID TRIAL TYPE
Explanation: The daily planning trial type was not correctly specified. You can specify only one of the following
options:
N
C
F

For Extending Current Plan Period — Trial
For Replanning Current Plan Period — Trial
For Producing Daily Plan — Trial.

System action: The daily planning program is terminated.
User response: Change the parameter value for the trial type in the SYSIN statement of the daily planning program.
EQQ0345W PREP VERIFICATION FAILED FOR APPL **************** ******** **.**
Explanation: An operation on a workstation using the Tivoli OPC job setup facility must have a job name to combine
it with a computer operation in the same application. The computer operation must be an immediate successor to the
preparation (job setup) operation.
System action: This application cannot be used in job tracking and is not added to the current plan.
User response: Use the Application Description dialog to update the application description on the application
description database. Use the Modify Current Plan dialog to add the application description to the current plan.

506

Tivoli OPC Messages and Codes

EQQ0346W EQQ0351W

| EQQ0346W DEPENDENCY **************** ***, FROM **************** ****** **** *** IS LEFT UNRESOLVED, BEFORE
|
PLAN START
Explanation: A dependency could not be resolved because the predecessor occurrence is not in the current plan.
System action: The occurrence is scheduled without considering the unresolved dependency.
User response: Check the unresolved occurrence. If necessary, add a predecessor occurrence to the current plan.
EQQ0347E PERIOD START SDATE STIME EARLIER THAN CURRENT PLAN END
Explanation: When producing a trial daily plan extension, the period start time must be equal to the current plan
end.
System action: The daily planning program is terminated.
User response: Change the parameter value for the trial type in the SYSIN statement for the daily planning
program. Use the Daily Planning dialog to get the current value for period start on the Producing Trial Daily Plan
panel.
EQQ0348I APPL **************** ******** **.** ASSUMES FOLLOWING PRED COMPL
Explanation: When producing a trial daily plan extension, all predecessor applications with the input arrival time
earlier than the period start time are assumed to be completed. This message is followed by EQQ0349I.
System action: The daily planning program continues processing.
EQQ0349I APPL **************** ******** **.** COMPLETED
Explanation: The application is assumed to be completed. See also message EQQ0348I.
System action: The daily planning program continues processing.
EQQ0350E PERIOD START LATER THAN LAST BACKUP TIME
Explanation: Reporting can only be requested for time periods less recent than the last old current plan. The old
current plan is a backup copy of the current plan and is updated either after every certain number of events (specified
at installation time) or during daily planning.
System action: The daily planning program is terminated.
User response: Change the parameter value for the trial type in the SYSIN statement for the daily planning
program. Use the Daily Planning dialog to get the current value for period start on the Producing Trial Daily Plan
panel.
EQQ0351W PERIOD END LATER THAN ******** **.** LAST BACKUP TIME
Explanation: Reporting can only be requested for time periods less recent than the last old current plan. The old
current plan is a backup copy of the current plan and is updated either after every certain number of events (specified
at installation time) or during daily planning.
System action: The daily planning program is terminated.
User response: Change the parameter value for the trial type in the SYSIN statement for the daily planning
program. Use the Daily Planning dialog to get the current value for period end on the Producing Trial Daily Plan
panel.

Chapter 37. EQQnnnn Messages

507

EQQ0352W EQQ0370W

EQQ0352W NO DEP IN ******** **************** **.** FOR ******** **************** **.**
Explanation: An inconsistency in the long-term plan file dependencies has been found. Predecessor data for the
first occurrence in the message selects the second occurrence that:
is already completed or deleted
no longer exists
has the corresponding successor dependency marked as “deleted.”
System action: The daily planning program prints a dump of the erroneous long-term plan file records on the
EQQDUMP file, issues an error message, marks the dependency on the long-term plan file as “completed,” and
continues processing.
User response: Document the prior actions concerning the involved occurrences and contact your system
programmer.
System programmer response: Collect the dump, the error message, and other relevant information for this
occurrence. Contact your IBM representative.
EQQ0353I APPL **************** ******** **.** NOT IN SUMMARY OF COMPL APPL
Explanation: The application had an invalid completion date and could not be added to the summary table of
completed applications (maximum 28 days). The reason may be an incorrect day given at IPL of the system.
System action: The daily planning program continues processing.
User response: None.
EQQ0354W NUMBER OF OPEN INTERVALS EXCEEDS MAXIMUM FOR WORKSTATION **** PLANNING MAY
BE AFFECTED
Explanation: The current plan record is larger than 32 KB (kilobytes).
System action: The daily planning program continues processing, and ignores the extra open intervals.
User response: Use the Work Station Description dialog to decrease the number of open intervals.
EQQ0355W PREDECESSOR ******** **************** **.** FOR ******** **************** **.** MISSING
Explanation: A predecessor could not be found as expected. It is probably caused by an error in the long-term plan
(LTP) or the OPC current plan (OCP), or both.
System action: The job continues
User response: Check the flagged occurrences and contact your system programmer.
System programmer response: Collect documentation and contact your IBM representative. The following
documentation is required: long-term plan, current plan, job-tracking logs. Both the long-term plan and the current
plan should reflect the status BEFORE the job was run during which the message was issued.
EQQ0370W THE POTENTIAL PREDECESSOR RECORD FOR APPLICATION APPL COULD NOT BE UPDATED.
THE MAXIMUM NUMBER (1000) OF POTENTIAL SUCCESSOR OPERATIONS HAS BEEN REACHED.
Explanation: The daily planning program was unable to add any more successor operation entries to a potential
predecessor record. Since the record could not be updated as intended, it does not define all potential successors for
application APPL. If new occurrences of this application are added by program interface (PIF) programs or by the
event-triggered tracking (ETT) function it is not possible to add all possible successor dependencies automatically.
System action: The daily planning program continues normal processing.
Problem determination: This message indicates that many different operations in different applications have defined
operations of one application as external predecessors. If the message is unexpected, review the contents of the
application description database and remove old applications that are no longer used.
User response: Use the Modify Current Plan dialog to add new occurrences of the application defined by this
message, making sure that you use the DEP primary command to verify that successor dependencies have been set
up correctly.

508

Tivoli OPC Messages and Codes

EQQ0380E EQQ0384E

EQQ0380E DEPENDENCY LOOP IN APPL NETWORK. OPERATIONS AFFECTED
Explanation: Dependent operations in separate application descriptions form a loop. (Loops in one application are
checked in the Application Description dialog.) The dependencies between the operations are such that none of the
operations can ever be started. For example: A is dependent on B, B is dependent on C, C is dependent on A. This
message is issued together with EQQ0381E.
System action: No new current plan is produced, but a printed plan is produced for all valid networks.
User response: Use the Long-Term Planning dialog to change the dependencies and resubmit the job.
EQQ0381E APPL **************** ******** **.** OP ******** IN DEPENDENCY LOOP
Explanation: This message is issued together with EQQ0380E. It is issued once for each operation involved in the
dependency loop.
System action: No new current plan is produced, but a printed plan is produced for all valid networks.
User response: Use the Long-Term Planning dialog to change the dependencies and resubmit the job.
EQQ0384E DLATEXT
Explanation: This message is issued by the Dependency Loop Analyzer function of the daily planning program.
This function is invoked whenever a planned network is found to contain one or more loops. That is, a dependency
chain may be such that an operation effectively is dependent on itself.
The Dependency Loop Analyzer function studies the contents of this network and reports the contents of the loop and
related information via this message. The text contained in the variable DLATEXT may be one of the following:
DEPENDENCY LOOP FOUND IN AN APPLICATION NETWORK
Dependent operations in separate application descriptions form a loop. (Loops in one application are checked in
the Application Description dialog.) The dependencies between the operations are such that none of the
operations can ever be started. For example: A is dependent on B, B is dependent on C, C is dependent on A.
This message may also be issued as EQQ0380E.
LIST OF OPERATIONS CONTAINED IN LOOP FOLLOWS:
This message follows the previous loop error condition message and is a loop contents header message. The
message is always followed by a set of messages, each containing identification of one operation in the loop.
LOOP: OP OPID JOBN IN APPL APPLID IA IADATE IATIME
This message follows the loop contents header message. The message contains operation and application
identification of one operation contained in the loop.
The variable OPID contains the operation ID, for example, CPUA_001, the workstation name and operation
number, while the JOBN variable contains the jobname. The APPLID variable contains the name of the
application containing this operation. Finally the variables IADATE and IATIME contain the input arrival date and
time, respectively, for this operation occurrence.
SUGGESTED DEPENDENCIES CAUSING LOOP ARE:
This message is a dependency loop analysis header and precedes the analysis. One or more dependencies are
identified as the probable causes of the dependency loop as follows:
1. The operation input arrival is earlier than its predecessor operation's input arrival. The Dependency Loop
Analyzer uses the input arrival time as a primary criteria for locating loop causing dependencies in the NET.
2. The operation is closest to the entry of the loop. That is, it is a predecessor of the first operation in the loop,
the entry, if such exists. The loop entry operation is the “first” operation in the NET and any operation that
has the entry on the successor path is a candidate for the close to entry criteria.
3. Removal of this dependency has a minimal impact on the NET, but removes the loop. Minimal impact is
defined as the operation having the lowest number of dependencies (successors plus predecessors) in the
NET. A dependency to that operation is then the minimal disturbance dependency. The Dependency Loop
Analyzer function locates such operations primarily among the operations having external dependencies and
hence, if an external dependency is reported, it is of minimal impact among the operations having external

Chapter 37. EQQnnnn Messages

509

EQQ0386I EQQ0386I

dependencies. If no such dependencies are found in the present NET, a minimal disturbance dependency is
reported disregarding the external criteria.
The criteria are weighted in the listed order, so that any operation dependency satisfying the highest (top of the
list) criteria is reported as probable cause.
MULTIPLE LOOP PATHS ENCOUNTERED IN NETWORK
Tivoli OPC has, when analyzing the dependency loop, located more than one loop path. This means, that there
might be more than one causing dependency reported via subsequent messages. The Dependency Loop
Analyzer function continues with another pass, reflecting the contents of the subsequent loop.
APPLID1 OPID1 JOBN1 DEPT PATH TO APPLID2 OPID2 JOBN2 BY IA TIME CHECK
This message contains identification of a dependency that causes the loop, as deduced by Tivoli OPC. The
variables APPLID1, APPLID2 and the variables OPID1, OPID2 contain application and operation identifiers for this
dependency. The DEPT contains the dependency type (SUCC or PRED) of APPLID1 to APPLID2.
The dependency is selected according to the IAtime criteria, that is, the successor operation has an IAtime that is
earlier than the predecessor operation.
Note: There may be intermediate operations counting from the reported predecessor operation to the successor
operation. This is due to the fact that some operations are not significant for the networking process and are as
such excluded from the NET.
APPLID1 OPID1 JOBN1 DEPT PATH TO APPLID2 OPID2 JOBN2 IS CLOSEST TO LOOP ENTRY
This message contains identification of a dependency that causes the loop, as deduced by Tivoli OPC. The
variables APPLID1, APPLID2 and the variables OPID1, OPID2 contain application and operation identifiers for this
dependency. The DEPTYPE contains the dependency type (SUCC or PRED) of APPLID1 to APPLID2.
The dependency is selected according to the closest to loop entry criteria, that is, the dependency is the last
selectable on the loop path, when traversing the path backwards from the loop entry in the present NET.
REMOVAL OF APPLID1 OPID1.JOBN1 DEPT PATH TO APPLID2 OPID2 JOBN2 CAUSES MINIMUM NET
DISTORTION
This message contains identification of a dependency that causes the loop, as deduced by Tivoli OPC. The
variables APPLID1, APPLID2 and the variables OPID1, OPID2 contain application and operation identifiers for this
dependency. The DEPTYPE contains the dependency type (SUCC or PRED) of APPLID1 to APPLID2.
The dependency is selected according to the minimal impact criteria, that is, removal of this dependency causes
the least distortion to the present NET.
System action: No new current plan is created and Tivoli OPC continues normal processing. Reporting continues.
Problem determination: This message is for information only. The daily planning program has terminated due to
the loop condition.
User response: The operation identification given through these messages may be used to investigate and correct
the dependencies causing the loop. Use the Application Description dialog or the Long-Term Planning dialog to
correct the dependencies. If the loop is caused by an internal dependency, the most likely cause is the application
description and should be corrected using that dialog. An external dependency can be corrected using either of the
dialogs. When the error has been corrected resubmit the daily planning batch job.
EQQ0386I APPL **************** ******** **.** OP ******** WILL MISS DEADLINE
Explanation: The plan indicates that the operation specified in the message cannot meet its deadline. Possible
reasons for this could be: insufficient workstation resources, priority too low, and late predecessors.
System action: Tivoli OPC plans the operation so that it is completed as close to the deadline as possible.
User response: If it is not acceptable that the operation be late, identify and modify the factor that is causing the
delay.

510

Tivoli OPC Messages and Codes

EQQ0387I EQQ0394I

EQQ0387I APPL **************** ******** **.** WILL MISS APPL DEADLINE
Explanation: The plan indicates that the operation specified in the message cannot meet its deadline. Possible
reasons for this could be: insufficient workstation resources, priority too low, and late predecessors.
System action: Tivoli OPC plans the operation so that it is completed as close to the deadline as possible.
User response: If it is not acceptable that the application be late, identify and modify the factor that is causing the
delay.
EQQ0388I APPL **************** ******** **.** OP ******** START > TAIL END
Explanation: The operation specified in this message cannot be planned to start until after the end of period.
Possible reasons for this could be: insufficient workstation resources or special resources, priority too low, and late
predecessors.
System action: The operation is planned to start at the end of period.
User response: Check the flagged operations and successors. If unacceptable, extend the planning period or alter
the resource levels.
EQQ0389I APPL **************** ******** **.** OP ******** END > TAIL END
Explanation: The operation specified in this message cannot be planned to start until after the end of period.
Possible reasons for this could be: insufficient workstation resources, priority too low, and late predecessors.
System action: The operation is given an end time equal to the tail end time plus the operation duration. Potential
delays due to resource limitations are not considered.
User response: Check the flagged operations and successors. If unacceptable, extend the planning period or alter
the resource levels.

| EQQ0393I MISSING DEPENDENCY FOR **************** ******** **.** OP ********
| Explanation: This operation occurrence has an internal or external predecessor (or successor) that does not have as
| its successor (or predecessor) this operation occurrence. This message is issued together with message EQQ0394I,
| which provides information about the predecessor (or successor).
| System action: No new current plan is produced.
| User response: Use the Long-Term Planning dialog to check the involved dependencies.
| System programmer response: If you cannot find a valid reason for the error, contact your IBM representative.
| EQQ0394I MISSING DEPENDENCY IN **************** ******** **.** OP ********
| Explanation: This operation occurrence has an internal or external successor (or predecessor), but does not see this
| dependency. This message is issued together with message EQQ0393I, which provides information about the
| successor (or predecessor).
| System action: No new current plan is produced.
| User response: Use the Long-Term Planning dialog to check the involved dependencies.
| System programmer response: If you cannot find a valid reason for the error, contact your IBM representative.

Chapter 37. EQQnnnn Messages

511

EQQ0398E EQQ0412E

EQQ0398E UNSUCCESSFUL PUT SYNAD1
Explanation: An error occurred while writing to an intermediate work file or the track log file used by daily planning.
The SYNAD routine extracted the following information: job name, stepname, unit address, device type, ddname,
operation, error description, phys-DA, and access method.
System action: The daily planning program is terminated. A new current plan and reports may have been
produced.
Problem determination: The SYNAD routine collects information such as jobname, stepname, unit address, device
type, ddname, operation, error description, and access method. The SYNADAF macro is used to extract this
information. For a detailed description of the layout refer to the appropriate documentation for the MVS/DFP product
installed on this MVS/ESA system.
User response: If no new current plan was produced, correct the error and resubmit the job. If a new current plan
was produced but not the reports, correct the error and use the Replanning Current Plan Period panel to produce the
reports.
EQQ0399I SYNAD2
Explanation: This message is a continuation of message EQQ0398E.
System action: The daily planning program is terminated. A new current plan and reports may have been
produced.
User response: If no new current plan was produced, correct the error and resubmit the job. If a new current plan
was produced but not the reports, correct the error and use the Replanning Current Plan Period panel to produce the
reports.
EQQ0401E INVALID DATES GENERATED FOR APPLICATION ADID RULE RULE
Explanation: The long-term plan batch programs encountered invalid dates when trying to generate occurrence run
dates for a rule-based run cycle. Most likely, this is an internal OPC processing error.
Note: Run dates already generated for this run cycle should be perfectly valid and useable.
If the run cycle is based on a regular rule, dates after the failure point are missing. If it is based on an exclusion rule,
dates after the failure point are not excluded by this run cycle. Dates generated for the other run cycles of the
application are valid and appear in the plan.
System action: The job stops processing the current rule-based run cycle and continues with the next belonging to
the application.
User response: Debugging information written to the OPC dump dataset (EQQDUMP) should be forwarded to your
local IBM representative.
EQQ0405E DATE DATE PRIOR TO CURRENT DATE
Explanation: A date specified to Tivoli OPC is prior to the current date.
System action: The job is terminated.
User response: Correct the date and rerun the job.
EQQ0412E SPECIFIED TIME SPAN IS GREATER THAN 4 YEARS
Explanation: The time span, from current date to end date, may not exceed four years.
System action: If this message is issued from a batch job, the submit request is terminated. If it is issued in the
dialog, the system waits for you to respond.
User response: Specify an end date less than four years from the current date.

512

Tivoli OPC Messages and Codes

EQQ0420E EQQ0452W

EQQ0420E CALENDAR ID NOT SPECIFIED
Explanation: This message is issued from a batch job. The submit request is terminated.
User response: Specify a valid calendar ID.
EQQ0421E CALENDAR CALNAME NOT FOUND IN DATA BASE
Explanation: This message is issued from a batch job. The submit request is terminated.
User response: Specify the ID of an existing calendar.
EQQ0422E PRINT END DATE NOT SPECIFIED
Explanation: This message is issued from a batch job. The submit request is terminated.
User response: Specify an end date for the calendar/period print program.
EQQ0423I NO CALENDAR FOUND IN DATA BASE

| Explanation: This message is issued from a batch job. The submit request is terminated. There is no calendar
| stored in the database.
| User response: Create a valid new calendar in the database.
EQQ0430W ADID DAY TIME HAS BEEN CHANGED ON-LINE
Explanation: The operations or dependencies of the occurrence have been changed using the Long-Term Planning
dialog.
System action: The job continues processing and the occurrence is copied as is to the new long-term plan.
However, changes made to the application description, fpor example, changed input arrival, are not considered.
User response: If changes have been made to the application, verify that the occurrence has correct run date and
time, deadline date and time, priority, dependencies, and operation data. If they are incorrect, use the Long-Term
Planning dialog or the Modify Current Plan dialog to correct them.
EQQ0431W LTP RUN CONTAINS WORK STATIONS NOT DEFINED IN WS DESCRIPTION DATA BASE. NO
STATISTICS GENERATED FOR WORK STATION WSID
Explanation: The long-term plan dataset contains references to workstations that no longer exist in the workstation
description database. Most likely, the workstation descriptions were deleted after the last update of the long-term plan
dataset.
System action: The job continues processing, but no statistics are generated for the identified workstation.
User response: None.
EQQ0451W NO SUCCESSOR ADID DATE TIME TO ADIX DATX TIMX
Explanation: While modifying the long-term plan, a successor to an occurrence could not be found. This is probably
due to some abnormal situation that occurred either in an earlier long-term plan run or during an update using the
Long-Term Planning dialog. This resulted in some inconsistency in the long-term plan dataset.
System action: The job continues processing.
User response: Check the flagged applications.
EQQ0452W NO PREDECESSOR ADID DATE TIME TO ADIX DATX TIMX
Explanation: While modifying the long-term plan, a predecessor to an occurrence could not be found. This is
probably due to some abnormal situation which occurred either in an earlier long-term plan run or during an update
using the Long-Term Planning dialog. This resulted in some inconsistency in the long-term plan dataset.
System action: The job continues processing.
User response: Check the flagged applications.

Chapter 37. EQQnnnn Messages

513

EQQ0453W EQQ0461W

EQQ0453W NO OCCURRENCES FOUND FOR PRINT PERIOD STARTDAT - ENDDAT
Explanation: There are no occurrences in the long-term plan for the print period specified when requesting a print
out of the long-term plan.
System action: No occurrences are listed and the job is terminated.
User response: Check that the print period is correct.
EQQ0454W NO OCCURRENCES FOUND FOR APPLICATION LTADINID
Explanation: No occurrences for a specific application description ID are printed because no occurrences were
found.
System action: No occurrences are listed and the job is terminated.
User response: Check that the application description ID is valid.
EQQ0455I LTP REPORT PERIOD PARTLY OUTSIDE LTP PERIOD
Explanation: Either one or both long-term plan (LTP) report limits, specified when requesting a printout of the
long-term plan, are outside the LTP range.
System action: The job continues processing.
User response: Check that the print period is correct.
EQQ0458I NO PREDECESSOR PRAID FOUND FOR SUAID SAIAD SAIAT
Explanation: There is no occurrence that can be defined as a predecessor to the occurrence listed.
System action: The job continues processing, but no predecessor is defined for the occurrence.
User response: None.
EQQ0459I RCTEXT02 RCDATA02 CANCELS: ADID DATE TIME RCTEXT01 RCDATA01
Explanation: The RC variables are:
RCTEXT02 is 'NEGATIVE RUNCYCLE:' for period-based run cycles and 'EXCEPTION RULE:' for rule-based run
cycles.
RCDATA02 is NPER NSGN NOFS for period-based run cycles and NPER for rule-based run cycles.
RCTEXT01 is 'NORMAL RUNCYCLE:' for period-based run cycles and 'REGULAR RULE:' for rule-based run cycles.
RCDATA01 is PNAM SIGN OFFS for period-based run cycles and PNAM for rule-based run cycles.
The negative run cycle defined by NPER NSGN NOFS, or the exception rule defined by NPER, cancels the
occurrence ADID DATE TIME defined by the normal run cycle PNAM SIGN OFFS, or the regular rule defined by
PNAM.
System action: The job continues processing.
User response: None.
EQQ0460W ALL CHANGED DEPENDENCIES TO ADID DATE TIME REMOVED
Explanation: The indicated occurrence does not exist in the new long-term plan.
System action: The job continues processing. All dependencies to the occurrence are deleted.
User response: Make sure that this occurrence should not exist.
EQQ0461W ADID DAY TIME DELETED. AD MISSING
Explanation: During a modify all run of the long-term plan, the application description for the indicated
occurrence/run date/run time could no longer be found.
System action: The job continues processing. The occurrence in the long-term plan dataset is deleted.
User response: Make sure that this application description should not exist.

514

Tivoli OPC Messages and Codes

EQQ0500E EQQ0506W

EQQ0500E END DATE PRIOR TO CURRENT DATE
Explanation: An end date specified for a create or extend run of the long-term plan, should be later than or the
same as the current date.
System action: The job is terminated.
User response: Specify a valid date.
EQQ0501E INVALID REPORT TYPE TYPE
Explanation: The report type specified for a long-term plan print request is invalid. Valid report types are F for full
report, and D for dependencies only.
System action: The job is terminated.
User response: Specify a correct report type.
EQQ0502E START DATE AND TIME AFTER END DATE AND TIME
Explanation: The start date and time for the report interval in a long-term plan print request must be earlier than the
end date and time.
System action: The job is terminated.
User response: Specify a correct time interval.
EQQ0503E SPECIFIED PERIOD OUTSIDE LIMITS OF THE LONG TERM PLAN
Explanation: Extension of the long-term plan is determined by specific start and end dates in the long-term plan
header record. Dates outside the range specified by these dates for updating, printout, or display, are not allowed.
System action: The job is terminated.
User response: Correct the invalid dates.
EQQ0504E INVALID SORT ORDER ORDER
Explanation: The sort order specified is not valid. Valid sort orders are I, O, and A.
System action: The job is terminated.
User response: Specify a valid sort order.
EQQ0505E APPLICATION ADID DOES NOT EXIST IN THE AD DATA BASE
Explanation: The application (ADID) specified in the long-term plan occurrence is no longer found in the application
description database. Most likely, the specified application description has been deleted from the application
description database while the corresponding occurrences in the long-term plan dataset have not been deleted.
System action: The job is terminated.
User response: Check why the application description cannot be found. If it has been inadvertently deleted, it
should be reentered.
EQQ0506W APPLICATION ADID REFERS TO UNDEFINED CALENDAR CALID DEFAULT CALENDAR DEFCAL
WILL BE USED
Explanation: This message is issued from a long-term plan (LTP) batch program. The calendar specified in the
application description could not be found in the database. The default calendar is used.
System action: Processing continues.
User response: Specify a valid calendar in the application description.

Chapter 37. EQQnnnn Messages

515

EQQ0508W EQQ0513W

EQQ0508W APPLICATION ADID REFERS TO UNDEFINED CALENDAR CALID DEFAULT CALENDAR DEFCAL
NOT FOUND. ALL DAYS TREATED AS WORKDAYS
Explanation: This message is issued from a long-term plan (LTP) batch program. The calendar specified in the
application description could not be found in the database or the calendar specified in the CALENDAR parameter of
BATCHOPT could not be found. The DEFAULT calendar is used. If there is no DEFAULT calendar, all days are
treated as work days.
System action: The job continues processing.
User response: Do the following:
Specify a valid calendar in the application description.
Change the CALENDAR parameter in BATCHOPT to point to a valid calendar.

EQQ0509W APPLICATION ADID REFERS TO UNDEFINED DEFAULT CALENDAR CALID ALL DAYS TREATED
AS WORKDAYS
Explanation: This message is issued from a long-term plan (LTP) batch program. The calendar specified in the
application description could not be found in the database and the CALENDAR keyword is not defined on
BATCHOPT. The DEFAULT calendar is used. If there is no DEFAULT calendar, all days are treated as work days.
System action: The job continues processing.
User response: Change the CALENDAR parameter in BATCHOPT to point to a valid calendar.
EQQ0511W ADID DATE MOVED OUTSIDE RANGE OF AD. RUNCYCLE: PNAM SIGN OFFS FREE DAY RULE:
RULE
Explanation: An occurrence has been generated and moved to the date shown. The move resulted in a date
outside the validity limits specified in the application description or resulted in a date after the end date of the
long-term plan. If the reason was that the occurrence was moved after the end date of the long-term plan, then the
occurrence is included in the next extend of the long-term plan.
System action: The job continues processing, but the occurrence is not included in the long-term plan dataset.
User response: Check if the occurrence should be included. If it should, use the Long-Term Planning dialog to add
the occurrence.
EQQ0512W GROUP DEFINITION GADID FOR ADID CANNOT BE FOUND FOR PERIOD LOWDATE TO
HIGHDATE
Explanation: A group definition is specified for this application, but the group definition cannot be found in the
application description database.
System action: The job continues processing, but no occurrence is included in the long-term plan dataset for the
application ADID.
User response: Create the requested group definition, or change the name in the group definition ID field, or erase
the group definition ID.
EQQ0513W GROUP DEFINITION GADID FOR ADID CONTAINS NO RUN CYCLES FOR PERIOD LOWDATE TO
HIGHDATE
Explanation: The group definition specified for this application has no run cycle information.
System action: The job continues processing, but no occurrence is included in the long-term plan dataset for the
application ADID.
User response: If applications that reference the group definition should be scheduled by Tivoli OPC, include run
cycle information in the group definition.

516

Tivoli OPC Messages and Codes

EQQ0515E EQQ0520W

EQQ0515E INVALID INPUT LONG TERM PLAN DATA SET. A NEW LTP IS NOT CREATED. THE BACKUP LTP
DATA SET IS VALID BUT THE INPUT LTP IS NOT
Explanation: The long-term plan (LTP) batch program has found that the input LTP file does not contain a valid
long-term plan, but the LTP backup file is valid. The most likely cause of this message is that the previous execution
of the LTP batch program failed before the new LTP file was successfully built.
System action: The LTP batch program ends without updating the input LTP file or the backup LTP file.
System programmer response: Copy the backup LTP file into the LTP file and reexecute the LTP batch program.
EQQ0516E APPLICATION APPL, IA = IA, REFERENCES MORE OCCURRENCES THAN CAN BE CONTAINED IN
LARGEST POSSIBLE RECORD IN THE LD WORK FILE
Explanation: The long-term plan (LTP) batch program determined that the current occurrence referenced more
occurrences than the maximum possible defined by the maximum size of a record in the LD work file.
System action: The LTP batch program uses only those dependencies that can be contained in the maximum LD
record. Remaining dependencies for this occurrence are not used.
System programmer response: Redefine the LD work file to use a larger maximum record size and reexecute the
LTP batch program.
EQQ0517W ADID DATE MOVED OUTSIDE GENERATING SPAN. REGULAR RULE: PNAM FREE DAY RULE:
RULE
Explanation: An occurrence has been generated and moved to the date shown. The move resulted in a date
outside the generating span. Span start is defined as the highest date of the application description (AD) valid-from
date, run cycle in-effect date and long-term plan (LTP) start date. Span end is defined as the lowest date of AD
valid-to date, run cycle out-of-effect date minus 1, and LTP end date.
System action: The job continues processing, but the occurrence is not included in the LTP dataset.
User response: Check if the occurrence should be included. If it should, use the Long-Term Planning dialog to add
the occurrence.
EQQ0519W BACKUP OF THE LONG TERM PLAN DATA SET FAILED
Explanation: The long-term plan (LTP) batch program or the daily planning batch program was unable to copy the
LTP file to the LTP backup file.
System action: The batch program continues normally.
System programmer response: Determine the reason for the backup failure from earlier messages in the message
log dataset. Take appropriate action to correct the problem and reexecute the batch program.
EQQ0520W NO OCCURRENCES TO RUN GENERATED
Explanation: No new occurrences have been generated for the specified time period. Possible reasons are:
Specific application not found
No valid applications in the period
No matching period definition.
System action: For the long-term plan (LTP) create function, the job is terminated, and if a LTP exists, it is not
replaced. For other LTP functions, the job continues processing.
User response: Check the LTP dataset and the application description and calendar databases.

Chapter 37. EQQnnnn Messages

517

EQQ0521E EQQ0528W

EQQ0521E SORT FAILURE FOR WORK DATA SET: DDN
Explanation: Sort was invoked to sort on a long-term plan dataset, but the program issued a return code of 16.
System action: The job is terminated.
User response: Make the SORT program diagnostic messages on SYSOUT available to your system programmer.
System programmer response: Investigate the reason for the incorrect sort and rerun the job.
EQQ0522I MAXIMUM NUMBER OF LTP DEPENDENCIES PER OCCURRENCE IS MAXDEP
Explanation: This message indicates the maximum number of predecessors and successors that can be created per
occurrence using the maximum record sizes specified for the VSAM files defined by the EQQLDDS and EQQLTDS
DD statements.
System action: The long-term plan (LTP) batch job continues processing.
User response: Verify that the maximum number of dependencies is not too small. If necessary, reallocate the
EQQLDDS and EQQLTDS files to support a larger maximum record size and resubmit the LTP batch job.
EQQ0523W END DAY DATE ASSUMED WORKDAY FOR CORRECT LTP-CREATION
Explanation: When you create or extend the long-term plan, the end date must be a work day.
System action: DATE is assumed as a work day and processing continues.
User response: Check the reason why DATE is a free day. If the long-term plan produced is incorrect, specify a
new end date as the nearest work day prior to this date, and rerun the job.
EQQ0524W PERIOD PNAM IN APPLICATION ADID NOT FOUND
Explanation: The period specified in the application description database does not exist in the calendar database.
System action: The job continues processing, but the job bypasses this run cycle and generates long-term plan
occurrences for the next run cycle.
User response: Add the period to the calendar, or remove the application run cycle, or change the period name in
the run cycle description.
EQQ0525W OFFSET > PERIOD LENGTH AD: ADID RUNCYCLE: PNAM SIGN OFFS
Explanation: For a given application/run cycle number, the offset is greater than the period length for the specified
period.
System action: The job continues processing, but no occurrences are created for the displayed offset.
User response: Correct either the offset or the period length in the calendar.
EQQ0527W ADID DATE HAS OFFSET > NONCYCLIC PERIOD LENGTH
RUNCYCLE: PNAM SIGN OFFS - NOT PLANNED.
Explanation: The occurrence ADID DATE has an offset that is greater than the length of closed interval of the
noncyclic period PNAM. (A closed interval has both origin and interval end dates defined.)
System action: The job continues processing, but the occurrence is not planned.
User response: Correct either the specified offset or the interval length of the noncyclic period.

EQQ0528W ADID DATE MOVED OUTSIDE NONCYCLIC PERIOD INTERVAL
RUNCYCLE: PNAM SIGN OFFS FREE DAY RULE: RULE - PLANNED
Explanation: The occurrence ADID DATE has been moved by free-day rule RULE. The moved date is outside the
closed interval of a noncyclic period. (A closed interval has both origin and interval end dates defined.)
System action: The job continues processing, but the occurrence is not planned.
User response: Correct either the free-day rule or the interval length of the noncyclic period.

518

Tivoli OPC Messages and Codes

EQQ0531I EQQ0537I

EQQ0531I GENERATED DUP OMITTED: ADID DATE TIME RCTEXT01 RCDATA01
Explanation: A unique occurrence consists of the application description ID, run date, and input arrival time. When
generating occurrences, duplicates have resulted. RCTEXT01 is 'NORMAL RUNCYCLE:' for offset-based run cycles,
and 'REGULAR RULE:' for rule-based run cycles. RCDATA01 is PNAM SIGN OFFS for offset-based run cycles, and
PNAM for rule-based run cycles.
System action: One occurrence is selected and the others are bypassed. The selected occurrence is the one
added using the Long-Term Planning dialog (if one exists) or the one with the lowest run cycle number.
User response: Check if the application should really run more than once at the same time. If it should, add it but
make it a unique occurrence, for example, by altering the input arrival time by one minute.
EQQ0532I ADID DAY TIME SUPPRESSED DUE TO ONLINE DELETE
Explanation: The indicated occurrence cannot be created because the old long-term plan contains the same
occurrence, but is marked as deleted.
System action: The job continues processing, but the indicated occurrence is not created.
User response: To create the occurrence, use the Long-Term Planning dialog to add it again.
EQQ0534W ORIGIN DATE MAY BE MISSING FOR PERIOD PNAM APPLICATION ADID
Explanation: To be sure of the correct use of the calendar database, for a noncyclic period, you must have at least
one origin date beyond the specified end date of the long-term plan. This ensures that no work remains unplanned for
the period in question.
System action: The job continues processing.
User response: Investigate whether the noncyclic period PNAM should be extended further into the future.
EQQ0535W COULD NOT MOVE ADID DATE TIME RUNCYCLE: PNAM SIGN OFFS NOT PLANNED
Explanation: The run date calculated using the run cycle information identified in the message for the occurrence
ADID DATE TIME is a free day, and the specified free-day rule is 1 (run on the closest work day before the free day).
However, Tivoli OPC could not move the occurrence prior to the free day because the closest work day is before the
current plan end date.
System action: The occurrence is not included in the long-term plan (LTP).
User response: If the occurrence should be scheduled, add it manually to the current plan, or change the run cycle
or calendar information and rerun the LTP batch job.
EQQ0536W CAN NOT MOVE, MODIFY OR DELETE ADID DATE TIME. OCCURRENCE HAS SUCCESSOR IN
THE CURRENT PLAN.
Explanation: The occurrence indicated cannot be moved, modified, or deleted because it has at least one successor
in the current plan. It occurs in the current plan as a pending predecessor. This message is followed by message
EQQ0537I, which identifies the successor occurrence.
System action: Long-term planning continues processing. The indicated occurrence is not moved, modified, or
deleted.
User response: If required, use the Long-Term Planning dialog to modify or delete the occurrence.
EQQ0537I ADID DATE TIME
Explanation: This message identifies the successor to a pending occurrence in the current plan. This message is
issued together with message EQQ0536W.
System action: Long-term planning continues processing.
User response: Review message EQQ0536W to determine the reason for this message.

Chapter 37. EQQnnnn Messages

519

EQQ0540E EQQ0546W

EQQ0540E SPECIFIED PRINTOUT PERIOD GREATER THAN 4 YEARS
Explanation: You are requesting a printout of the long-term plan dataset for a period of longer than four years, but
the long-term plan can have a span of up to four years only.
System action: The job is terminated.
User response: Request a printout for a period of çess than four years.
EQQ0541E LONG TERM PLAN EMPTY - NO HEADER RECORD
Explanation: A long-term plan batch function is trying to reference a long-term plan dataset that has no header. The
long-term plan is either empty or in error.
System action: The job is terminated.
User response: Use the Long-Term Planning dialog to create a long-term plan.
EQQ0542W OCCURRENCE FOR APPLICATION AD WITH RUNDAY RUNDAY AND INPUT ARRIVAL RTIME
COULD NOT BE FOUND IN THE LONG TERM PLAN. PREDECESSORS / SUCCESSORS FOR THE
APPLICATION MAY HAVE TO BE MANUALLY COMPLETED
Explanation: The actual occurrence has been deleted from the long-term plan, probably by a non-Tivoli OPC
function.
System action: A new current plan is created, but the daily planning program ends with a return code of 4.
User response: To make the current plan consistent, check the current plan that is created and complete or delete
dependencies.
EQQ0543E LTP END DATE - LTP START DATE > 4 YEARS
Explanation: A long-term plan must not be longer than four years.
System action: The job is terminated.
User response: Respecify the long-term plan end date.
EQQ0544E LTP EXISTS - OCCURRENCES SELECTED BY DAILY PLAN
Explanation: Occurrences in the long-term plan have been selected by daily planning and might have been included
in the current plan. It is not possible to create the long-term plan without first refreshing it using the Service Function
dialog.
System action: The job is terminated.
User response: Select another long-term plan function.
EQQ0545E START DATE AFTER END DATE
Explanation: The start date must be earlier than the end date.
System action: The job is terminated.
User response: Specify correct dates and resubmit the job.
EQQ0546W THE PREDECESSOR PRED WITH RUNDAY PREDAY AND INPUT ARRIVAL PTIME, FOR
APPLICATION AD IN THE LONG TERM PLAN COULD NOT BE FOUND. THE APPLICATION AD
WITH RUNDAY RUNDAY AND INPUT ARRIVAL RTIME MAY HAVE TO BE MANUALLY COMPLETED
OR DELETED
Explanation: The actual occurrence has been deleted from the long-term plan, probably by a non-Tivoli OPC
function.
System action: A new current plan is created, but the daily planning program ends with a return code of 4.
User response: To make the current plan consistent, check the current plan that is created and complete or delete
the occurrence for the application.

520

Tivoli OPC Messages and Codes

EQQ0547W EQQ0554W

EQQ0547W THE SUCCESSOR SUC WITH RUNDAY SUCDAY AND INPUT ARRIVAL STIME, FOR APPLICATION
AD IN THE LONG TERM PLAN COULD NOT BE FOUND. THE APPLICATION AD WITH RUNDAY
RUNDAY AND INPUT ARRIVAL RTIME MAY HAVE TO BE MANUALLY COMPLETED OR DELETED
Explanation: The actual occurrence has been deleted from the long-term plan, probably by a non-Tivoli OPC
function.
System action: A new current plan is created, but the daily planning program ends with a return code of 4.
User response: To make the current plan consistent, check the current plan that is created and complete or delete
the occurrence for the application.
EQQ0550E UNDEFINED RECORD FORMAT NOT ALLOWED, DDNAME = ADUSERDS
Explanation: The record format for the user input dataset in the application print program should be either fixed or
variable. Undefined is not supported.
System action: The application print program is terminated.
User response: Use a correct input dataset and resubmit the job.
EQQ0551E REPORT TYPE MUST BE FROM 1 TO 4
Explanation: The report type must be a number from 1 through 4:
1
2
3
4

Detailed
Internal dependencies
Operations using particular workstations
Owners.

System action: The job is terminated.
User response: Change the input parameter and resubmit the job.
EQQ0552E INPUT TYPE MUST BE 1, 2, OR 3
Explanation: The input type must be a number from 1 through 3:
1
2
3

The input includes all application description IDs, owners, or workstation IDs.
A list of up to 12 applications.
Application description IDs are to be read from a user-supplied dataset.

System action: The job is terminated.
User response: Change the parameter and resubmit the job.
EQQ0553E RECORD LENGTH IS LESS THAN 16 FOR USER-DATASET, DDNAME = ADUSERDS
Explanation: When the record format was fixed, the user dataset in the application print program had a record
length of less than 16.
System action: The application print program is terminated.
User response: Use a dataset with a record length of 16 or more and resubmit the job.
EQQ0554W AD STARTING WITH ADID IS INVALID, TOO LONG
Explanation: The specified application ID contains more than 16 characters.
System action: The job continues processing.
User response: Specify the correct application ID and resubmit the job.

Chapter 37. EQQnnnn Messages

521

EQQ0555W EQQ0561W

EQQ0555W WS ID WSID NOT FOUND WITHIN ANY APPLICATION
Explanation: When printing an “operations using particular work stations” report during an application description
PRINT, the specified workstation name does not appear in any application description.
System action: The job continues processing.
User response: Specify the correct workstation name and resubmit the job.
EQQ0556W ADID ADID < 16 CHARACTERS, IT WAS PADDED WITH BLANKS
Explanation: The indicated application ID was read from the user dataset and was found to be less than 16
characters. It is padded with blanks up to the sixteenth character. This message is issued only if the input dataset
has a variable record length.
System action: The application print program continues processing.
User response: Check if all wanted applications were printed.
EQQ0557W OWNER ID OWID NOT FOUND WITHIN ANY APPLICATION
Explanation: When printing an “owner ID” report type or displaying the long-term plan for one owner, the specified
owner ID does not appear in any application description.
System action: The job continues processing.
User response: Specify the correct owner ID and resubmit the job.
EQQ0558W NO AD RECORDS FOUND THAT MEET THE REQUIRED SPECIFICATIONS
Explanation: No application description records were found that met the required specifications.
System action: The job is terminated.
User response: Check that the application description database is not empty, that if a date is specified it is correct,
and that the specified IDs are correct. Correct the errors and resubmit the job.
EQQ0559E SORT OUT OF SEQUENCE
Explanation: The application print program found a record that was not sorted in the proper sequence.
System action: The job is terminated.
User response: Contact your system programmer.
System programmer response: Check the sort program messages to determine the cause of the error. If you
cannot determine the cause of the error, and if the error persists, contact your IBM representative.
EQQ0560E SORT FAILED
Explanation: Sort was invoked on a work dataset for an application description printout, but the program issued a
return code of 16.
System action: The job is terminated.
User response: Contact your system programmer.
System programmer response: Check the sort program messages to determine the cause of the error. Correct the
error and resubmit the job.
EQQ0561W APPLICATION ADID NOT VALID ON DATE
Explanation: A detailed application description printout is requested for a specific application, valid on a specific
date, but no such description exists in the application description database.
System action: The job continues processing.
User response: Check if the date is correctly specified and if an application description that is valid on that date
should exist.

522

Tivoli OPC Messages and Codes

EQQ0562E EQQ0589W

EQQ0562E INVALID COMBINATION OF INPUT PARAMETERS
Explanation: It is not possible to select input type 3 when report type 3 or 4 has been chosen.
System action: The job is terminated.
User response: Check the input parameters and resubmit the job.
EQQ0563E INVALID NUMBER OF ITEMS IN INPUT PARAMETERS
Explanation: The number of items is greater than 12 or does not equal the number of items in the list.
System action: The job is terminated.
User response: Check the input parameters and resubmit the job.
EQQ0564W RECORD IS BLANK OR APPLICATION ID DOES NOT START IN POSITION ONE
Explanation: A record in the user input dataset was found that was blank or the application ID did not start in
position one.
System action: The record is ignored.
User response: Check if the record in the input user dataset is blank or if the application ID starts in position one.
EQQ0567W APPLICATION ADID HAS INVALID RULE RULE IN RUNCYCLE
Explanation: The internal representation of rule RULE in application ADID is invalid and the corresponding rule
command cannot be derived from it.
System action: The job continues processing with the next run cycle or application description.
User response: Use the Application Description dialog to check the rule definition. If necessary, redefine the rule.
EQQ0585I NO CHANGES PERFORMED FOR THIS SELECTION
Explanation: You have specified that a certain field should be changed by the mass update function, but no field in
the application description database matched the specifications.
System action: The job continues processing. The application description database is not updated for this selection.
User response: Check the input specifications, correct any errors, and retry the mass update of this field.
EQQ0588E OCCURRENCE OCCAD OCCDAY OCCTIME HAS TOO MANY PREDECESSORS.
CURRENT PREDECESSOR APPLICATION IS DEPAD DEPDAY DEPTIME.
Explanation: An occurrence has been found that has too many predecessors to be saved in the long-term plan
(LTP) dependency work file defined by the EQQLDDS DD statement.
System action: The LTP batch job terminates processing. No new LTP is created.
User response: Verify that external predecessors have been correctly defined in the Application Description file for
this application. If necessary, reallocate the EQQLDDS and EQQLTDS files to support a larger maximum record size.
After making corrections, resubmit the failing LTP batch job.
EQQ0589W ERROR DETECTED WHEN PROCESSING AN OPERATIONS NETWORK FOR OCCURRENCE OCCID
Explanation: When building a network for operations within a single application, a loop or an inconsistency was
found. This message indicates that an error in the application description was introduced after the application
description was created.
System action: The job continues processing. No occurrences are generated for the application.
User response: Check the application description.

Chapter 37. EQQnnnn Messages

523

EQQ0590W EQQ0600E

EQQ0590W OCCURRENCE OCCAD OCCDAY OCCTIME HAS TOO MANY SUCCESSORS.
CURRENT SUCCESSOR APPLICATION IS DEPAD DEPDAY DEPTIME.
NSUC SUCCESSOR DEPENDENCIES COULD NOT BE CREATED
Explanation: An occurrence has been found that has too many successors to be saved in the long-term plan (LTP)
dependency work file defined by the EQQLDDS DD statement.
System action: The LTP batch job continues processing. No dependency is created between the current
occurrence and the current successor occurrence or any other occurrence with a later input arrival time.
User response: Verify that external predecessors have been correctly defined in the Application Description file for
thecurrent successor application. Use the information given by message EQQ0522 to determine the maximum
number of dependencies that is supported by the EQQLDDS and EQQLTDS files. If necessary, reallocate the
EQQLDDS and EQQLTDS files to support a larger maximum record size and resubmit the LTP batch job.

| EQQ0591E WRONG INPUT PARAMETERS TO BATCH JOB
Explanation: Parameters in the SYSIN statement are specified incorrectly. The error can arise, for example, when
the alignment of parameters is wrong or when there is an extra parameter.
System action: The job is terminated.
User response: Specify the parameters correctly and resubmit the job.

| EQQ0592E THE SPECIFIED PERIOD CAN NOT BE HANDLED BY THE LTP BATCH PROGRAM
Explanation: When creating a long-term plan (LTP), Tivoli OPC builds a calendar that begins four years before the
start of the LTP period and ends four years after the end of the LTP period. Tivoli OPC cannot handle dates later
than 31 December 2071. The specified LTP time period would result in an LTP calendar extending beyond 2071.
System action: The job is terminated.
User response: Redefine the LTP period and resubmit the job.
EQQ0593E NO INPUT PARAMETERS TO BATCH JOB
Explanation: No parameters were specified in the SYSIN statement for a batch job.
System action: The job is terminated.
User response: Specify the necessary parameters and resubmit the job.
EQQ0597E UNABLE TO OPEN SEQUENTIAL FILE DDNAME
Explanation: The dataset with the ddname DDNAME could not be opened.
System action: The job is terminated.
User response: Contact your system programmer.
System programmer response: Check that the indicated dataset is defined by a DD statement and that it is
available.
EQQ0599E DD-STATEMENT MISSING FOR FILE DDNAME
Explanation: The DD statement for the file with ddname DDNAME is missing.
System action: The job is terminated.
User response: Add the missing DD statement in the JCL and rerun the job.
EQQ0600E EITHER AN END DATE OR AN EXTENSION LENGTH MUST BE GIVEN
Explanation: You must specify either a new end date or an extension length, not both.
System action: The long-term plan (LTP) batch job terminates processing.
User response: Check the JCL of the LTP batch job, update the SYSIN statement, and resubmit the job.

524

Tivoli OPC Messages and Codes

EQQ0601E EQQ0617I

EQQ0601E THE EXTENSION LENGTH SHOULD BE A NUMERIC VALUE FROM 0001 TO 1461
Explanation: The extension length must be not longer than 4 years, that is, 1461 days.
System action: The long-term plan batch job terminates processing.
User response: Update the extension length on the SYSIN statement and resubmit the job.
EQQ0602E AN EXTENSION LENGTH AND A START DATE CANNOT BE ENTERED TOGETHER
Explanation: You must specify either an extension length or a start date and an end date.
System action: The long-term plan batch job terminates processing.
User response: Update the SYSIN statement and resubmit the job.
EQQ0603E A START DATE REQUIRES AN END DATE TO BE SPECIFIED
Explanation: To simulate the long-term plan (LTP) create function you must specify both a start date and an end
date.
System action: The LTP batch job terminates processing.
User response: Specify both a start date and an end date on the SYSIN statement and resubmit the job.
EQQ0613I NO RESFILTER VALUES. REASON IS NOREASON
Explanation: This message is issued by the daily planning (DP) batch programs to the EQQMLOG dataset when no
filtering values for resource reports can be found. The message variable contains the reason. The following values
are presented using the NOREASON message variable:
NO RESFILTER DATASET NAME GIVEN
RESFILTER DATASET COULD NOT BE OPENED
DATASET DOES NOT CONTAIN ANY RESFILTER STATEMENTS.
System action: The DP batch job continues processing. There are no reports of any kind produced for resources.
User response: This message does not necessarily represent an error. If resource reports are desired, correct (for
each of the designated reasons):
The DP batch program SYSIN, if the name of the RESFILTER dataset was omitted.
The allocation of the dataset or PDS to be a FB 80 dataset. For this message reason, the dataset name given in
the DP SYSIN can be invalid or misspelled.
The name given in the DP SYSIN. If the name is correct, provide filter values as RESFILTER statements in this
dataset.

EQQ0617I ********************************************************************
Explanation: This message is issued by the daily planning (DP) batch programs to the DP report dataset when an
operation misses deadline due to a special resource allocation delay. The message identifies the operation, the
special resource causing the delay, and the previous planned start time. The reason why the special resource
allocation cannot be satisfied is also included. The reason text can contain:
Special Resource is not available. The special resource is not available at the time indicated by the planned start
time. Either an interval specifies that the resource should be unavailable or, if no interval exists for this time, the
default values specify that the resource is not available.
The Workstation is not connected to this resource. The workstation on which the operation is defined is not in the
workstation connect table at the planned start time.
Resource contention. The resource could not be allocated because it was already allocated by another operation.
System action: The DP batch job continues processing.
User response: Use the reason to decide if you should change the special resource definition or the application
description.

Chapter 37. EQQnnnn Messages

525

EQQ0618W EQQ0831E

| EQQ0618W RES: **************** LAST IVL USED ****** ****
Explanation: This message is issued by the daily planning (DP) batch programs to the DP report dataset when the
default segment of a special resource differs from what is defined in the special resource database.
System action: The DP batch job continues processing. The default interval of the special resource is reset to the
values specified in the special resource database.
User response: If the default values have been changed in the special resource monitor log, update the values
again or update the defaults set in the database.

| EQQ0619W RESOURCE *************************, DEFAULTS WERE RESET
Explanation: This message is issued by the daily planning (DP) batch programs to the DP report dataset when the
default interval of a special resource differs from what is defined in the special resource database.
System action: The DP batch job continues processing. The default interval of the special resource is reset to the
values specified in the special resource database.
User response: If you used the Special Resources dialog to change the default values, reuse that dialog to reset the
values of the defaults in the database or to update the values in the database.
EQQ0820E APPLICATION NAME, OPNUMBER NO DOES NOT EXIST
Explanation: The indicated application name or operation number, or both, for which you want to create an operator
instruction, cannot be found in the application description database.
System action: The job is terminated.
User response: Check a printout of the applications in your installation.
EQQ0821E PROGRAM INTERFACE INITIALIZATION REQUEST TO SUBSYSTEM SUBSYS FAILED
Explanation: A program interface (PIF) initialization request to subsystem SUBSYS was a failure. When the job
does not allocate the EQQOIDS file, Tivoli OPC uses the PIF to retrieve or update operator instructions.
System action: The job is terminated.
User response: Check that the correct subsystem name is specified in the SUBSYS parameter of the BATCHOPT
statement. Also check the message log and the SYSLOG for additional messages. If EQQDUMP has been allocated,
it might contain additional diagnostic information, for example, a message indicating that PIF was unable to allocate a
message log.
If the controller is not active, specify the EQQOIDS DD statement in the JCL and resubmit the job.
EQQ0822E PROGRAM INTERFACE REQUEST TO SUBSYSTEM SUBSYS FAILED
Explanation: A program interface (PIF) request to subsystem SUBSYS was a failure. When the job does not
allocate the EQQOIDS file, Tivoli OPC uses the PIF to retrieve or update operator instructions.
System action: The job is terminated.
User response: Check the message log to determine the cause of the error. If EQQDUMP has been allocated, it
might contain additional diagnostic information. Also make sure that the correct subsystem name is specified in the
SUBSYS parameter of the BATCHOPT statement or in the INIT statement.
EQQ0831E RECORD FORMAT MUST BE FIXED IN INPUT DATASET, DDNAME = EQQOPIN
Explanation: When doing a mass update of operator instructions, the record format must be fixed for the sequential
input dataset.
System action: The job is terminated.
User response: Use a correct input dataset and resubmit the job.

526

Tivoli OPC Messages and Codes

EQQ0832E EQQ0839W

EQQ0832E RECORD LENGTH IS NOT 80 IN INPUT DATASET, DDNAME = EQQOPIN
Explanation: When doing a mass update of operator instructions, the record length must be 80 for the sequential
input dataset.
System action: The job is terminated.
User response: Use a correct input dataset and resubmit the job.
EQQ0834E INVALID REPLACE PARAMETER: REPL
Explanation: The replace attribute that you entered was invalid or it is missing. Valid replace attributes are:
Y

In the operator instructions database, replace the operator instructions whose search key matches a key in the
sequential input file, and add the operator instructions whose search key is not found in the operator instructions
database.

Add only the operator instructions whose search key is not found in the operator instructions database.

System action: The job is terminated.
User response: Enter a valid replace attribute.
EQQ0836E INVALID OPERATOR INSTRUCTION FUNCTION TYPE
Explanation: The operator instruction (OI) function type that you entered was invalid. Valid function types
(corresponding with the print and mass update options in the Operator Instruction dialog) are:
5
6
7
8

Print the OI in application description ID order.
Print the OI in workstation order.
Purge old OIs.
Process sequential input.

System action: The job is terminated.
User response: Enter a valid function type.
EQQ0837W FIRST INPUT RECORD NOT HEADER RECORD
Explanation: The first record encountered while creating operator instructions from a sequential input file is not a
header record.
System action: The job continues processing. All records up to the first valid header record are bypassed.
User response: Correct your input and resubmit the job so that the bypassed instructions are also created or use
the Operator Instruction dialog to create the instructions.
EQQ0838W INVALID INPUT SYNTAX. NO KEY FIELD SPECIFIED
Explanation: A header record is encountered, but no key field is specified.
System action: The job continues processing. All records up to the first valid header record are bypassed.
User response: Correct your input and resubmit the job so that the bypassed instructions are also created or use
the Operator Instruction dialog to create the instructions.

| EQQ0839W INVALID LENGTH LEN OF KEY FIELD. KEY: NAME NO
| Explanation: You specified a key field for the key NAME NO, but the length of the value that you gave to it is too
| large.
System action: The job continues processing. All records up to the first valid header record are bypassed.
User response: Correct your input and resubmit the job so that the bypassed instructions are also created or use
the Operator Instruction dialog to create the instructions.

Chapter 37. EQQnnnn Messages

527

EQQ0840W EQQ0848W

| EQQ0840W INVALID LENGTH LEN OF VALFROM FIELD. INSTR.: NAME NO
Explanation: You specified a valid-from field (for operator instruction NAME) that is less than 10 characters long.
System action: The job continues processing. All records up to the first valid header record are bypassed.
User response: Correct your input and resubmit the job so that the bypassed instructions are also created or use
the Operator Instruction dialog to create the instructions.
EQQ0841W NO APPLICATION NAME FOUND FOR OPERATOR INSTRUCTION
Explanation: An operator instruction must contain a valid application name and operation number corresponding to
an existing application.
System action: The job continues processing, but the instruction is not created. All records up to the next header
statement are bypassed.
User response: Add the corresponding application description or if the application name is misspelled, change it.

| EQQ0844W OPERATOR INSTRUCTION NAME NO ALREADY EXISTS
Explanation: The operator instruction (NAME) that you attempted to add already exists in the operator instructions
database.
System action: The job continues processing, but the instruction is not created. All records up to the next valid
header statement are bypassed.
User response: Use the Operator Instruction dialog to modify the operator instruction.

| EQQ0845W VALFROM > VALID TO DATE+TIME. INSTR.: NAME NO
Explanation: The valid-from date that you specified in the operator instruction NAME is later than the valid-to date
and time. The valid-from date must be earlier than the valid-to date.
System action: The job continues processing, but the instruction is not created. All records up to the next valid
header statement are bypassed.
User response: Enter valid dates.

| EQQ0846W BOTH DATE AND TIME MUST BE SPECIFIED. INSTR.: NAME NO
Explanation: Either the date or the time was omitted. Both are required.
System action: The job continues processing, but the instruction is not created. All records up to the next valid
header statement are bypassed.
User response: Correct your input.
EQQ0847W EMPTY OPERATOR INSTRUCTION IN SEQ INPUT FILE
Explanation: The operator instruction has no instruction text.
System action: The job continues processing, but the operator instruction is not added to the operator instructions
database.
User response: Add text to the operator instruction in the sequential input file.

| EQQ0848W PERIOD OVERLAPPING FOR INSTR: NAME NO
Explanation: Temporary operator instructions for application NAME have periods that overlap. Temporary operator
instructions with overlapping periods are not allowed.
System action: The job continues processing, but the operator instruction is not added to the operator instructions
database.
User response: Change the valid-from and valid-to periods in the operator instructions so that they do not overlap.

528

Tivoli OPC Messages and Codes

EQQ0849W EQQ0954E

| EQQ0849W AD NOT VALID AT SAME TIME AS INSTR: NAME NO
Explanation: The specified operator instruction is not within the valid-from and valid-to time period for the application
description.
System action: The job continues processing, but the operator instructions database is not updated with the
specified operator instructions.
User response: Correct the valid-from and valid-to times for the specified operator instruction in the sequential input
file.

| EQQ0936E I/O ERROR ON MESSAGE DATA SET FOR MESSAGE *******
| Explanation: Tivoli OPC was not able to display message *******. The message ******* is not in the Tivoli OPC
| message log dataset.
| System action: See “system action” in message *******.
| User response: Contact your system programmer and see message *******.
System programmer response: Check that the latest version of the Tivoli OPC message library (ddname
EQQMLIB) is installed. You may have installed the code for a new fix, but not the corresponding level of the message
library.

| EQQ0937W MESSAGE ******* IS LONGER THAN 120 CHARACTERS
Explanation: The indicated message is longer than 120 characters.
System action: The job continues processing, but ignores the invalid message.
User response: Contact your system programmer.
System programmer response: Check that the latest version of the Tivoli OPC message library (ddname
EQQMLIB) is installed and that the indicated message has not been changed at your installation. If you cannot fix the
problem, contact your IBM representative.
EQQ0953E OCCURRENCE ANAME AT ATIME VSAM KEY: OPKEY HAS AN INVALID OPERATION
Explanation: An operation record was detected with a zero operation number.
System action: The daily planning batch job is stopped with a return code of 12.
User response: Contact your system programmer.
System programmer response: This is a Tivoli OPC error. Create an APAR tape, use IDCAMS to delete the
operation with the given VSAM key, and contact your IBM representative.
EQQ0954E FUNC FAILED FOR FILE LOGICAL FILE, CALLING MODULE IS MODULE
Explanation: A batch program attempted to perform the function FUNC against the VSAM file FILE, but the attempt
failed. The I/O request is from module MODULE.
System action: The job is terminated.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log for I/O errors that immediately precede this
message. This message usually comes with another error message that describes the error in more detail. If you
cannot fix the problem, contact your IBM representative.

Chapter 37. EQQnnnn Messages

529

EQQ0955E EQQ0971E

EQQ0955E FUNC REQUESTED FOR FILE FILE WHICH IS NOT OPEN CALLING MODULE IS MODULE
Explanation: A batch program attempted to perform the function FUNC against the file FILE, but the file had not
been opened. The I/O request is from module MODULE.
System action: The job is terminated.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log for I/O errors that immediately precede this
message. If you cannot fix the problem, contact your IBM representative.
EQQ0957E LOGICAL END OF FILE ON FILE-DS: FUNC,KEY
Explanation: A batch program attempted to read a record in the dataset FILE, but the record no longer exists in the
dataset.
System action: The job is terminated.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log for I/O errors that immediately precede this
message. If you cannot fix the problem, contact your IBM representative.
EQQ0958E FUNC FAILED FOR FILE, CALLING MODULE IS MODULE
Explanation: A batch program attempted to perform the function FUNC against the file FILE, but the attempt failed.
The I/O request is from module MODULE.
System action: The job is terminated.
User response: Contact your system programmer.
System programmer response: Review the Tivoli OPC message log for I/O errors that immediately precede this
message. If you cannot fix the problem, contact your IBM representative.
EQQ0959E FUNC FAILED FOR FILE MSG: SYNADMSG CALLING MODULE IS MODULE
Explanation: A batch program attempted to perform the function FUNC against the file FILE, but the attempt failed.
The I/O request is from module MODULE.
System action: The job is terminated.
Problem determination: The SYNAD routine collects information such as jobname, stepname, unit address, device
type, ddname, operation, error description, and access method. The SYNADAF macro is used to extract this
information. For a detailed description of the layout refer to the appropriate documentation for the MVS/DFP product
installed on this MVS/ESA system.
User response: Contact your system programmer.
System programmer response: Determine the cause of the error and take the appropriate action.

| EQQ0971E MAXIMUM NUMBER OF OCCURRENCES HAS BEEN REACHED FOR APPLICATION ADID
Explanation: No more occurrences of this application can be added. The current plan can contain approximately
970 occurrences of each application.
When the Tivoli OPC dialog is used to add occurrences, a lower limit (approximately 870) is used.
System action: The daily planning batch program ends, but no new current plan is created.
User response: Complete or delete occurrences of this application that are no longer needed. This prevents these
occurrences from being included if the daily plan is rerun. If necessary, use a shorter planning period. Resubmit the
daily planning job.

530

Tivoli OPC Messages and Codes

EQQ0972E EQQ1594E

EQQ0972E MAXIMUM NUMBER OF OCCURRENCES REACHED
Explanation: No more occurrences can be added to the current plan because the maximum number of occurrences
has been reached.
System action: The daily planning batch program ends, but no new current plan is created. If a current plan existed
prior to the running of the daily planning job, Tivoli OPC continues to use the existing current plan.
Problem determination: Check the long-term plan for instances of an unusually high number of occurrences of a
particular application. If you see such an application, look in the application description database and make sure that
the run cycles for the application are correct. If the current plan contains a significant number of completed or deleted
occurrences, submit a daily plan REPLAN.
If you use event-triggered tracking (ETT), program interface (PIF), or Automatic Recovery, check that these functions
are working correctly. For example, make sure that you do not have an endless ETT loop, where the availability of a
special resource is set to YES by a job that ETT adds, when it detects that this same resource is set to YES.
When you specify PREVRES(YES) in the BATCHOPT initialization statement, information about completed and
deleted occurrences is carried forward, for reporting purposes, into a new current plan. If your current plan regularly
contains a large number of occurrences and you specify YES for PREVRES, you should consider changing this value
to NO.
User response: Check the value specified in the MAXOCCNUM parameter of BATCHOPT. If no value is specified,
Tivoli OPC defaults the value to 32767.
Review problem determination and take any appropriate actions. Resubmit the daily planning job.
EQQ1457E NO OUTPUT FILE COULD BE OPENED. PLEASE CHECK JCL
Explanation: The daily planning print program could not open any output dataset.
System action: The job is terminated.
User response: Check the JCL. There must be at least a SYSPRINT DD statement present. Resubmit the job.
EQQ1458I DAILY PLANNING REPORT USER EXIT IS ACTIVE FOR THIS PRINTOUT
Explanation: The exit for daily planning print is activated.
System action: The job continues processing.
User response: None.
EQQ1459I DAILY PLANNING REPORT USER EXIT IS NOT ACTIVE FOR THIS PRINTOUT
Explanation: The exit for daily planning print is not activated.
System action: The job continues processing.
User response: None
EQQ1594E INVALID PARAMETER SPECIFIED IN SYSIN
Explanation: Parameters in the SYSIN statement must be a character string. Valid values are 01, 02, 03, 04, 05,
06, 07, 08, 09, 10, 11, 12, 13, and 14.
System action: The job is terminated.
User response: If the job was submitted outside Tivoli OPC, correct the parameters and resubmit the job. If the job
was submitted from the Application Description dialog, contact your system programmer.
System programmer response: Check the batch job submit panels and make sure that the Tivoli OPC input field
verification logic has not been removed or changed. If the panels were not removed or changed, contact your IBM
representative.

Chapter 37. EQQnnnn Messages

531

EQQ1595I EQQ2012W

EQQ1595I OUTPUT FIELDS HAVE BEEN TRUNCATED
Explanation: Lines longer than 120 characters have been truncated in the report.
System action: The run cycle description and special resource fields are truncated.
User response: None.
EQQ1596E NO PARAMETERS SPECIFIED
Explanation: No parameters were specified in the SYSIN statement for a batch job.
System action: The job is terminated and a return code of 8 is issued.
User response: Specify the necessary parameters and resubmit the job.
EQQ2010E DAILY PLAN ENDS DUE TO ERRORS IN INPUT DATA. REFER TO DIAGNOSTIC FILE EQQDUMP
FOR MORE INFORMATION
Explanation: The daily planning program has detected an error in the input data. The validation error action
specified in the BATCHOPT statement is to end the daily planning program.
System action: The daily planning program ends. No new current plan is created.
Problem determination: Refer to the preceding validation error message and data in the dump dataset, EQQDUMP,
to determine the cause of the error.
User response: If necessary, use the Tivoli OPC dialog to remove incorrect records. After making corrections,
resubmit the daily planning job.
EQQ2011W A PREDECESSOR TO APPLICATION APPL IADATE IATIME WAS NOT FOUND
Explanation: The daily planning program was unable to find a predecessor to the occurrence defined by this
message.
System action: The daily planning program takes the action defined by the VALEACTION keyword of the
BATCHOPT statement.
Problem determination: Refer to the data in the dump dataset, EQQDUMP, to determine the cause of the error.
User response: If no new plan is produced, resubmit the daily planning job with VALEACTION(W) specified in the
BATCHOPT statement. If a new plan has been created, use the Tivoli OPC dialog to verify that dependencies have
been correctly created for the identified occurrence. The dialog can be used to repair the inconsistency in the current
plan or long-term plan records. It may be necessary to delete and add again the predecessor occurrence or the
identified occurrence. In some instances it may be sufficient to delete a predecessor specification.
EQQ2012W A SUCCESSOR TO APPLICATION APPL IADATE IATIME WAS NOT FOUND
Explanation: The daily planning program was unable to find a successor to the occurrence defined by this message.
System action: The daily planning program takes the action defined by the VALEACTION keyword of the
BATCHOPT statement.
Problem determination: Refer to the data in the dump dataset, EQQDUMP, to determine the cause of the error.
User response: If no new plan is produced, resubmit the daily planning job with VALEACTION(W) specified in the
BATCHOPT statement. If a new plan has been created, use the Tivoli OPC dialog to verify that dependencies have
been correctly created for the identified occurrence. The dialog can be used to repair the inconsistency in the current
plan or long-term plan records. It may be necessary to delete and add again the successor occurrence or the
identified occurrence. In some instances it may be sufficient to delete a successor specification.

532

Tivoli OPC Messages and Codes

EQQ2013W EQQ2016E

EQQ2013W A RERUN RECORD WITHOUT A MATCHING OCCURRENCE RECORD WAS FOUND
Explanation: The daily planning program was unable to find an occurrence record for an occurrence referenced in a
rerun record (record type 09).
System action: The daily planning program takes the action defined by the VALEACTION keyword of the
BATCHOPT statement.
Problem determination: Refer to the data in the dump dataset, EQQDUMP, to determine the cause of the error.
User response: If no new plan is produced, resubmit the daily planning job with VALEACTION(W) specified in the
BATCHOPT statement.
EQQ2014W A READY LIST ENTRY WITHOUT A MATCHING OCCURRENCE RECORD WAS FOUND FOR WORK
STATION WSNAME
Explanation: The daily planning program was unable to find an occurrence record for an occurrence referenced in a
ready list record (record type 11).
System action: The daily planning program takes the action defined by the VALEACTION keyword of the
BATCHOPT statement.
Problem determination: Refer to the data in the dump dataset, EQQDUMP, to determine the cause of the error.
User response: If no new plan is produced, resubmit the daily planning job with VALEACTION(W) specified in the
BATCHOPT statement.
EQQ2015W AN INTERNAL PREDECESSOR IN APPLICATION APPL IADATE IATIME WAS NOT FOUND
Explanation: The daily planning program was unable to find an operation record for an operation defined as an
internal predecessor to an operation in the occurrence defined by this message.
System action: The daily planning program takes the action defined by the VALEACTION keyword of the
BATCHOPT statement.
Problem determination: Refer to the data in the dump dataset, EQQDUMP, to determine the cause of the error.
User response: If no new plan is produced, resubmit the daily planning job with VALEACTION(W) specified in the
BATCHOPT statement. If a new plan has been created, use the Tivoli OPC dialog to verify that dependencies have
been correctly created for the identified occurrence.
EQQ2016E OPERATION OPERNR IN APPLICATION APPLID IS TOO LARGE TO BE SAVED IN THE NEW
CURRENT PLAN DATA SET. THE FAILING OPERATION CONTAINS PREDNR DEPENDENCIES AND
SPECNR SPECIAL RESOURCES
Explanation: The daily planning program was unable to create an operation record because it would be too large for
the output dataset defined by the EQQNCPDS DD statement.
System action: The daily planning program terminates processing.
User response: Reduce the number of dependencies or special resources for the failing application until all
operations in the application can be saved in the new current plan dataset. Resubmit the daily planning batch job.

Chapter 37. EQQnnnn Messages

533

EQQ2017W EQQ9975E

EQQ2017W AN OCCURRENCE WITH JOBNAME JOBNAME AND JOBNUMBER JOBNUMB FOR OPERATION
OPNUM IS MISSING IN THE CURRENT PLAN RECORD TYPE 05 WITH INDEX NUMBER OCCNUM
Explanation: The daily planning program was unable to find an index entry in the current plan record type 05 for the
occurrence with the specified operation.
System action: For occurrences that have been completed or deleted, the daily planning program takes the action
defined by the VALEACTION keyword of the BATCHOPT statement. In other instances, the daily planning program is
terminated with a return code of 08.
Problem determination: Refer to the data in the dump dataset, EQQDUMP, to determine the cause of the error.
User response: If no new plan is produced and the occurrence causing the problem is completed or deleted,
resubmit the daily planning job with VALEACTION(W) specified in the BATCHOPT statement. In other instances,
save the EQQDUMP output, create an APAR tape and contact your IBM representative.
EQQ2018W SPECIAL RESOURCE ERROR, REASON RSN
Explanation: The daily planning program found an error when processing special resources.
System action: The daily planning program takes the action defined by the VALEACTION keyword of the
BATCHOPT statement.
Problem determination: Refer to the data in the dump dataset, EQQDUMP, to determine the cause of the error.
User response: Contact your system programmer.
System programmer response: If no new plan is produced, resubmit the daily planning job with VALEACTION(W)
specified in the BATCHOPT statement. If a new plan has been created, use the Tivoli OPC dialog to verify that the
special resource and operations using the special resource are correct. The dialog can be used to repair the
inconsistency in the current plan or current plan extension records. Take a copy of the EQQDUMP. If
VALEACTION(A) was specified, save the dump and contact your IBM representative.

| EQQ2019E ADID: ADID, WS: WSID, OP: OPNO, JOBNAME: JOBNAME, IA: IAD1 IAT1 HAS AN INVALID
|
DEPENDENCY TO OPERATION ADID: ADI2, WS: WSI2, OP: OPN2, JOBNAME: JOBNAM2, IA: IAD2
|
IAT2
Explanation: The daily planning program found an invalid external dependency in an operation.
System action: The daily planning program is terminated with a return code of 08 without creating a new current
plan.
User response: Use the Modify Current Plan dialog to validate the external dependencies in the operation thatis
indicated first in the message.
EQQ9974E INVALID OPTION VALUE FOR OCCURRENCE NUMBER LIMIT
Explanation: The value of the occurrence number limit is invalid.
System action: The job is terminated.
User response: Check the input parameters and resubmit the job.
EQQ9975E INVALID OPTION VALUE FOR PAGE SIZE
Explanation: The value of the PAGESIZE keyword in the BATCHOPT parameter must be a number from 30 through
500. The default value is 55.
System action: The job is terminated.
User response: Specify a valid option value.

534

Tivoli OPC Messages and Codes

EQQ9979E EQQ9989E

EQQ9979E INVALID OPTION VALUE FOR PLANNING PERIOD
Explanation: The value of the PLANHOUR keyword in the BATCHOPT parameter is invalid.
System action: The job is terminated.
User response: Specify a valid option value. Refer to Tivoli OPC Customization and Tuning for more information.
EQQ9980E OPEN FAILED FOR PARMLIB DATA SET
Explanation: The batch program could not open the parameter library (EQQPARM) dataset.
System action: The job is terminated.
User response: Check and correct the EQQPARM DD statement in the JCL and resubmit the job.
EQQ9981E BATCHOPT PARAMETER NOT FOUND
Explanation: The batch program could not find the BATCHOPT initialization statement in the dataset specified in the
EQQPARM DD statement.
System action: The job is terminated.
User response: Check and correct the EQQPARM DD statement in the JCL and resubmit the job.
EQQ9985E INVALID OPTION VALUE FOR DP ALGORITHM
Explanation: The value of the DP algorithm (DPALG) option in the BATCHOPT parameter is invalid.
System action: The job is terminated.
User response: Specify a valid option value. Refer to Tivoli OPC Customization and Tuning for more information.
EQQ9986E DB2SYSTEM KEYWORD NOT SPECIFIED
Explanation: You have specified OPERHISTORY(YES) without specifying a value for the DB2SYSTEM keyword.
System action: The daily planning program is terminated
System programmer response: Edit the BATCHOPTS or OPCOPTS statement and either remove the
OPERHISTORY keyword or specify the name of a DB2 system in the DB2SYSTEM keyword.
EQQ9987W OPERHISTORY IS NO BUT RELATED PARAMETERS ARE SPECIFIED: IGNORED
Explanation: The BATCHOPTS statement specifies the DB2SYSTEM, CONTROLLERTOKEN, DB2AVAIL, or
RETAINOPER parameters, either without specifying the OPERHISTORY keyword or with OPERHISTORY set to NO.
System action: The daily planning program is terminated.
System programmer response: Check whether the history function is intentionally disabled or whether the
OPERHISTORY keyword was omitted. If the OPERHISTORY keyword was omitted, add it, setting the value to YES.
EQQ9988I DB2SYSTEM DB2SYS IS NOT AVAILABLE
Explanation: The DB2 system specified in the DB2SYSTEM keyword of the BATCHOPTS statement is not started,
has been stopped, or has abended, or the specified name is incorrect.
System action: The daily planning program continues processing, but no operations are inserted into the history
database.
System programmer response: Check the reason for the failure and correct the problem.

| EQQ9989E DB2 MODULE DB2MOD LOAD FAILED
| Explanation: DB2 module DB2MOD failed to load during the daily planning batch run.
System action: The daily planning batch job is terminated.
System programmer response: Check the reason for the failure and correct the problem.

Chapter 37. EQQnnnn Messages

535

536

Tivoli OPC Messages and Codes

1102 1121

Chapter 38. Abend Codes
This chapter lists the Tivoli OPC abend codes in numeric order.

1102
Explanation: Undefined feedback from VTAM, or a serious error after a VTAM request that makes continued
processing impossible. (Note: Message EQQV015E is issued only if request parameter list (RPL) feedback is
available.)
Problem determination: See message EQQV015E, which precedes this abend, for diagnostic information.
System programmer response: If an undefined feedback code was returned by VTAM, this is a VTAM problem.
Contact your IBM representative.
1103
Explanation: VTAM has detected an error while processing a request, or the error was detected in an associated
session, task, or address space.
System programmer response: Contact your IBM representative.
1104
Explanation: Serious error opening the NCF ACB. Most likely the VTAM definition of the NCF application is in error.
Problem determination: See message EQQV027E, which precedes this abend, for diagnostic information.
System programmer response: If the diagnosis points to a user definition error, correct the error and restart NCF.
Otherwise, contact your IBM representative.
1110
Explanation: Unrecoverable error when scheduling a VTAM macro.
Problem determination: See message EQQV015E, which precedes this abend, for diagnostic information.
System programmer response: Contact your IBM representative.
1111
Explanation: Invalid SCB block, or invalid pointer to it. (Internal NCF error.)
System programmer response: Contact your IBM representative.
1112
Explanation: Invalid NAB block, or invalid pointer to it. (Internal NCF error.)
System programmer response: Contact your IBM representative.
1113
Explanation: Invalid BIB block, or invalid pointer to it. (Internal NCF error.)
System programmer response: Contact your IBM representative.
1121
Explanation: All entries in the node table have been used. (Internal NCF error.)
System programmer response: Contact your IBM representative.

537

1124 3999

1124
Explanation: Invalid action code. (Internal NCF error.)
System programmer response: Contact your IBM representative.
2001
Explanation: Problem accessing the special resource dataspace during daily planning, and the VALEACTION
keyword of BATCHOPT specifies ABEND.
System programmer response: Take a copy of the old current-plan file, the EQQCXDS file, and the EQQRDDS
file, and contact your IBM representative.
3900
Explanation: Not enough storage available to continue execution.
System programmer response: Make sure that the region size specified for the tracker subsystem meets Tivoli
OPC requirements. If it does not, enlarge the region size accordingly and restart the subsystem. Otherwise, contact
your IBM representative.
3999
Explanation: Tivoli OPC's internal validity checking has discovered an error condition. This is an indication of an
internal Tivoli OPC error. A message that contains the reason for the abend, as well as other debugging information,
is written to the Tivoli OPC diagnostic file.
System programmer response: Contact your IBM representative.

538

Tivoli OPC Messages and Codes

Chapter 39. Reason Codes
| This chapter provides details of the reason codes that can appear in messages EQQFAxx, EQQG005E,
| EQQ0170W, or EQQY050E.
| Note: In the dump data set (diagnostic file, ddname EQQDUMP), dates are represented either in real
| date format or in the internal Tivoli OPC format.
The following table lists the reason codes that can appear in message EQQG005E or EQQ0170W. For
more information about a reason code, refer to the related message.
Reason Meaning (reason for failure)
code

Related
message

000

The record size exceeds the maximum record size for the application description
database.

EQQX300

002

The record version is invalid.

EQQX301

003

The application ID is invalid.

EQQX302

004

The application status is invalid. Valid application statuses are: A for active, P for
pending, or blank for both active and pending.

EQQX303

005

The valid-to date is invalid.

EQQX304

006

The valid-to time is invalid.

EQQX328

007

The record identifier is invalid.

EQQX321

010

The run cycle pointer is invalid.

EQQX305

011

The record size does not include the run cycle.

EQQX306

012

The offset to the next run cycle in the record is invalid. It must be 0 if it is last.

EQQX307

013

The JCL variable table name is invalid.

EQQX417

014

The rule name is invalid.

EQQA521

020

The operation pointer is invalid.

EQQX308

021

The record size does not include operation data.

EQQX309

022

The offset to the next operation in the record is invalid. It must be 0 if it is last.

EQQX310

023

The record size does not include dependencies and special resources.

EQQX311

100

The valid-from date is invalid or missing.

EQQX312

101

The valid-from date is later than the valid-to date; it must be earlier.

EQQX313

102

The authorization group is invalid.

EQQX314

103

The owner ID is missing.

EQQX315

104

The date for the last update is invalid or missing.

EQQX316

105

The time for the last update is invalid or missing.

EQQX317

106

The priority is invalid or missing. A valid priority is a number from 1 through 9.

EQQX318

107

The value specified in the number of operations field is invalid. A valid value is a
number from 1–99.

EQQX319

108

The number of run cycles is invalid. It does not match the actual number of run cycles
in the record.

EQQX320

109

The offset to the first run cycle is incompatible with the number of run cycles.

EQQX322

110

The offset to the first operation is invalid.

EQQX323

539

Reason Meaning (reason for failure)
code

Related
message

111

The common part of the application description record has invalid characters.

EQQX324

112

The calendar description identifier in the application description record is invalid.

EQQX325

113

The calendar description identifier referred to by the application description record does
not exist in the database.

EQQX326

114

The owner ID contains lower case characters.

EQQX397

115

An application or job description which specifies a group definition cannot contain a run
cycle.

EQQA516

116

Priority cannot be specified for a group definition.

EQQA510

117

Group definitions cannot contain operations.

EQQA500

118

Calendar cannot be specified for an application in a group.

EQQA511

119

Group definition cannot belong to another group.

EQQA503

120

The valid-from time is invalid.

EQQX327

122

Validity periods of temporary OI's must not overlap.

EQQK002

200

The run cycle period cannot be found.

EQQX329

201

The positive run day offset is not blank or numeric. It must be blank or 1 to 999.

EQQX330

202

The negative run day offset is not blank or numeric. It must be blank or 1 to 999.

EQQX376

203

The free day rule specification is invalid. A valid specification is E for free days
excluded; 1 for run on the closest work day before the free day; 2 for run on the closest
work day after the free day; 3 for run on the free day; or 4 for do not run at all.

EQQX331

204

The run cycle valid-from date is invalid or missing.

EQQX381

205

The run cycle valid-to date is invalid or missing.

EQQX375

206

The negative run cycle indicator is not blank or N. It must be either blank or N.

EQQX332

207

The input arrival time is invalid.

EQQX333

208

The relative deadline day is not numeric. It must be a number from 0 through 99.

EQQX334

209

The deadline time is invalid.

EQQX335

210

The run cycle section contains invalid characters.

EQQX336

211

Duplicate positive run day offsets found in a run cycle.

EQQX398

212

The variable table is not defined in the database.

EQQX418

213

No offsets have been defined for a run cycle.

EQQX436

214

Negative runday fields contain embedded blanks.

EQQX437

215

The rule name has already been specified as a run cycle for the AD.

EQQA522

216

The specified rule name is not defined.

EQQA520

301

The workstation description does not exist in the workstation description database.

EQQX337

302

The operation number is invalid. It must be a number from 1–99.

EQQX338

303

The duration time of the operation is invalid. It must be from 00.00 to 99.59.

EQQX339

304

The smoothing factor is invalid. It must be a number from 0 through 999.

EQQX340

305

The feedback limit is invalid. A valid feedback limit is a number from 100 through 999.

EQQX341

306

The automatic error completion code is invalid.

EQQX342

307

The job name is invalid.

EQQX343

308

The operation input arrival relative day is invalid.

EQQX344

540

Tivoli OPC Messages and Codes

Reason Meaning (reason for failure)
code

Related
message

309

The operation input arrival time is invalid.

EQQX345

310

The operation deadline relative day is invalid.

EQQX346

311

The operation deadline time is invalid.

EQQX347

312

The workstation resource 1 usage is invalid.

EQQX348

313

The workstation resource 2 usage is invalid.

EQQX348

314

The parallel processing count is invalid.

EQQX349

315

The number of internal predecessors is invalid; it is not compatible with the actual
number of predecessors in the record.

EQQX350

316

The number of external predecessors is invalid; it is not compatible with the actual
number of predecessors in the record.

EQQX351

317

The number of special resources is invalid; it is not compatible with the actual number
of special resources in the record.

EQQX352

318

The operation part of the application description record contains invalid characters.

EQQX353

319

Cancel if late specified for the non time-dependent job.

EQQX412

320

Relative start day missing for the time-dependent job.

EQQX413

321

Start time missing for the time-dependent job.

EQQX414

322

Job name is missing for the computer, printer, or job setup operation.

EQQX415

323

Number of parallel servers must be 1 for an operation on a computer workstation.

EQQX419

400

The workstation name for the internal predecessor is invalid.

EQQX354

401

The operation number for the internal predecessor is invalid.

EQQX355

402

The transport time for the internal predecessor is invalid.

EQQX356

403

The internal predecessor block contains invalid characters.

EQQX357

404

All internal processors in an operation must be unique.

EQQX395

450

The required application description does not exist.

EQQX377

455

The required application description does not contain an operator with the specified
operation number and workstation name.

EQQX378

456

The required application does not contain an operation with the specified operation
number.

EQQX379

457

The required application does not contain an operation on the specified workstation.

EQQX380

500

The application ID for the external predecessor is invalid.

EQQX358

501

The workstation name for the external predecessor is invalid.

EQQX359

502

The operation number for the external predecessor is invalid.

EQQX360

503

The transport time for the external predecessor is invalid.

EQQX356

504

The long-term plan print option for the external predecessor is invalid. Valid print
options are A for always, and C for conditionally.

EQQX361

505

The external predecessor block contains invalid characters.

EQQX357

506

All external processors in an operation must be unique.

EQQX396

507

More than 100 external predecessors were specified.

EQQX433

600

The special resource name is blank.

EQQX362

601

The special resource held option type is invalid. Valid special resource held options
are S for shared, and X for exclusive.

EQQX363

Chapter 39. Reason Codes

541

Reason Meaning (reason for failure)
code

Related
message

602

The special resource block contains invalid characters.

EQQX364

603

Duplicate special resources exist in the operation.

EQQX394

604

Resource quantity is not in the range 1-999999.

EQQX438

605

The on-error value is not valid.

EQQX429

700

Duplicate operations exist in the application description record.

EQQX365

701

A predecessor does not exist.

EQQX366

702

There is a loop in the application network.

EQQX367

703

All operations in the application do not belong to the same network.

EQQX368

704

A job setup, processor, or print operation lacks a job name.

EQQX369

705

A job setup operation has no processor operation as successor.

EQQX370

706

A print operation has no predecessors.

EQQX371

707

A print operation has more than one predecessor.

EQQX372

708

A print operation does not have a processor operation as predecessor.

EQQX373

709

A print operation has a predecessor with a different job name.

EQQX374

710

A job setup operation has no processor successor with the same job name.

EQQX416

800

The calendar record exceeds the maximum record size for the calendar description
record, or has a shorter than minimum size.

EQQX400

801

The calendar description record identifier was invalid.

EQQX321

802

The calendar description record version was invalid.

EQQX301

803

The calendar description ID is invalid.

EQQX401

804

The date for the last update is invalid or missing in the calendar description record.

EQQX316

805

The time for the last update is invalid or missing in the calendar description record.

EQQX317

806

The time for Work Day End Time is invalid or missing in the calendar description
record.

EQQX402

807

The number of weekday/date days has an invalid value in calendar description record.

EQQX403

808

The common section of the calendar description record contains invalid characters.

EQQX404

809

The size of the calendar description is too short to hold the number of weekday/date
days indicated in the common section of the record.

EQQX405

810

The weekday in the calendar description record is invalid.

EQQX406

811

The weekday days are not in ascending order in the calendar description record.

EQQX407

812

The status of the weekday/date field is not Work or Free.

EQQX408

813

The date in the calendar description record is invalid.

EQQX409

814

The date days are not in ascending order in the calendar description record.

EQQX410

815

The variable section of the calendar description record contains invalid characters.

EQQX411

835

The date and time specified in a request to modify an interval of a current plan
workstation is not the start of an interval.

EQQX144

836

An invalid value was specified for the parallel server capacity. Valid values are 0
through 99.

EQQX144

837

An invalid value was specified for the capacity of a workstation resource. Valid values
are 0 through 99.

EQQX144

542

Tivoli OPC Messages and Codes

Reason Meaning (reason for failure)
code

Related
message

850

The application ID was not specified.

EQQX390

851

The application ID is not bracketed by shift-in or shift-out characters.

EQQX382

852

The DBCS part of the field application ID is blank.

EQQX384

853

Check if the routine has encountered a superfluous shift-out or shift-in character within
the DBCS part of the field application ID.

EQQX385

854

The Field application ID contains either invalid DBCS characters, that is, out of the
range X'41' - X'FE', or an odd number of blanks (X'40'), in the trailing part of the
DBCS part of the field.

EQQX387

855

The DBCS-field application ID contains an odd number of bytes.

EQQX392

860

Group definition ID is invalid.

EQQX500

861

Group definition ID not in bracketed DBCS format.

EQQX501

862

No ID specified for DBCS group definition.

EQQX505

863

Unpaired shift-out or shift-in characters in group defintion.

EQQX502

864

Invalid DBCS characters in group defintion.

EQQX503

865

Odd number of bytes in group defintion.

EQQX504

870

The field owner ID was not specified.

EQQX391

871

The field owner ID is not bracketed by shift-in or shift-out characters.

EQQX383

872

The DBCS part of field owner ID is blank.

EQQX389

873

The check routine has encountered a superfluous shift-out or shift-in character in the
DBCS part of the field owner ID.

EQQX386

874

The Field owner ID contains either invalid DBCS characters, that is, out of the range
X'41' - X'FE', or an odd number of blanks (X'40'), in the trailing part of the DBCS
part of the field.

EQQX388

875

The DBCS-field owner ID contains an odd number of bytes.

EQQX393

1001

The control block is invalid.

EQQX321

1002

The block version is invalid.

EQQX301

1003

The request type is invalid.

EQQX420

1004

The length is invalid.

EQQX421

1011

The input arrival date is missing.

EQQX422

1012

The input arrival date is invalid.

EQQX423

1013

The input arrival time is missing.

EQQX424

1014

The input arrival time is invalid.

EQQX333

1015

The application IDs are different.

EQQX425

1016

The application ID is missing.

EQQX390

1017

The DBCS application ID is invalid.

EQQX387

1018

The application ID is invalid.

EQQX302

1021

The deadline date or time is given (but not both).

EQQX426

1022

The deadline date is invalid.

EQQX427

1023

The deadline time is invalid.

EQQX335

1024

The priority is invalid.

EQQX318

Chapter 39. Reason Codes

543

Reason Meaning (reason for failure)
code

Related
message

1031

The predecessor input arrival date is missing.

EQQX428

1032

The predecessor input arrival date is invalid.

EQQX423

1033

The predecessor input arrival time is missing.

EQQX429

1034

The predecessor input arrival time is invalid.

EQQX333

1035

The predecessor application ID is missing.

EQQX430

1036

The DBCS predecessor application ID is invalid.

EQQX382

1037

The predecessor application ID is invalid.

EQQX302

1038

An occurrence is dependent on itself.

EQQX434

1039

The input arrival date is later than the deadline.

EQQL510

1040

The input arrival time is later than the deadline.

EQQL510

2001

The status code is invalid.

EQQX431

2002

The function code is invalid.

EQQX432

| The following table lists the reason codes that can appear in message EQQY050E.
|
|

Reason Meaning (reason for failure)
code

|
|

800

The length specified for the modify current plan control block area is invalid. It is not large enough for
the MT0 (modify occurrence or workstation) and MTD (details) control blocks.

801

The control block identifier is invalid.

802

The control block version is invalid.

803

The request type is not a valid MT0TYPE request.

810

The application ID is invalid, format is EBCDIC.

811

The application ID is invalid, format is DBCS.

812

The actual input arrival date is not a valid date.

813

The actual input arrival time is not a valid time.

814

The original input arrival date is not a valid date.

815

The original input arrival time is not a valid time.

816

The deadline date is not a valid date.

817

The deadline time is not a valid time.

818

The priority is invalid. It must be a character in the range 1–9.

819

The authority group is not a valid name.

820

The owner ID is invalid, format is EBCDIC.

821

The owner ID is invalid, format is DBCS.

822

The owner ID is required but missing.

|
|

823

Either both the input arrivals (actual input arrival and original input arrival) and the deadline must be left
out or all three dates and times must be set.

|
|

824

The input arrival time is missing. It is required for all requests except for the ADD OCCURRENCE
request.

831

The workstation name is invalid.

544

Tivoli OPC Messages and Codes

|
|

Reason Meaning (reason for failure)
code

832

The workstation reporting attribute is invalid.

835

The interval to Modify or Delete is not found.

836

The parallel server capacity is invalid. It must be 0–99.

837

The workstation resource capacity is invalid. It must be 0–99.

|
|

838

The alternative workstation either is not one of the workstations in the current plan or is the same as
the primary workstation.

839

The interval to be inserted overlaps one of the existing intervals.

851

The details request type is not a valid MTDTYPE request.

852

The operation number in a details request is invalid. It must be 1–99.

861

The job name is not a valid name.

862

The workstation name is not a valid name.

866

The resource usage is invalid. It must be S or X.

867

The resource Keep On Error is invalid. It must be Y, N or blank.

868

The resource Quantity is invalid. It must be 0–999,999.

871

The job name in change options is not a valid name.

872

The operation status is not a valid status code.

875

The operation input arrival date is not a valid date.

876

The operation input arrival time is not a valid time.

877

The operation deadline date is not a valid date.

878

The operation deadline time is not a valid time.

881

The dependency type is invalid. It must be S or P.

882

The dependency operation number is invalid. It must be 1–99.

883

The dependency application ID is invalid. The format is EBCDIC.

884

The dependency application ID is invalid. The format is DBCS.

|
|

885

The dependency input arrival date is not a valid date or is missing. It is required in an external
dependency request.

|
|

886

The dependency input arrival time is not a valid time or is missing. It is required in an external
dependency request.

887

The deadline date is earlier than the input arrival date.

888

The deadline time is earlier than the input arrival time.

|
|

889

The syntax of the JCL variable table name is invalid. The table name must be 1 to 16 alphanumeric
characters, the first character being alphabetic.

890

An attempt was made to reference a JCL variable table name that does not exist.

| The following table lists the reason codes that can appear in some error messages or in answer to a
| controller request, when the OPC Data Store is used (messages EQQFAxx). For more information about
| a reason code, refer to the related message.
|
|

Reason
code

Meaning (reason for failure)

1024

VSAM error

Chapter 39. Reason Codes

545

|
|

Reason
code

EQQFA00

1025

EQQFA01

1026

EQQFA02

1027

EQQFA03

1028

EQQFA04

1029

EQQFA05

1030

EQQFA06

1031

EQQFA07

1032

EQQFA08

1034

EQQFA10

1035

EQQFA11

1036

EQQFA12

1037

EQQFA13

1038

EQQFA14

1044

EQQFA20

1045

EQQFA21

1046

EQQFA22

1048

EQQFA24

1049

EQQFA25

1050

EQQFA26

546

Meaning (reason for failure)

Bad control block

Bad instance

Bad parameter

Bad request

Bad sysout database

Is empty

Not found

Not initialized

Detach error

Not active

Not ready

Internal error

Bad data

Not open

Error in RPL generation for VSAM access

Error in Point operation on VSAM file

VSAM logical error in Get operation

VSAM physical error in Get operation

No parameter passed

Tivoli OPC Messages and Codes

|
|

Reason
code

Meaning (reason for failure)

1052

Transmission error from communication

EQQFA28

1054

EQQFA30

1056

EQQFA32

1058

EQQFA34

1060

EQQFA36

1061

EQQFA37

1063

EQQFA39

1066

EQQFA42

1067

EQQFA43

1068

EQQFA44

1069

EQQFA45

1070

EQQFA46

1071

EQQFA47

1072

EQQFA48

1073

EQQFA49

Bad status

Bad page

No space available

Error during enqueue

Already reserved

Error in ACB generation for VSAM access

No DD found

VSAM open error

Generic I/O error

Attach error

Unexpected task end

Error during a Dynalloc operation (allocation)

Error during SSI request

Error during a Dynalloc operation (unallocation)

Chapter 39. Reason Codes

547

548

Tivoli OPC Messages and Codes

00 44

Chapter 40. Tivoli OPC Batch Program Codes and Messages
This chapter describes the Tivoli OPC batch program codes and messages:
Completion codes that are returned by batch job EQQPDLF
Write-to-operator (WTO) messages that are generated by batch job EQQPURGE

EQQPDLF Batch Program Condition Codes
EQQPDLF returns one of the following codes upon completion.

RETAINED OBJECT FOUND AND DELETED

Explanation: The DLF object has been purged from Hiperspace.
System action: EQQPDLF terminates.
User response: None.
02

THE OBJECT DID NOT EXIST IN DLF

Explanation: This is a return code from COFSDONO.
System action: EQQPDLF terminates; no object is purged.
User response: None.
04

THE DATASET NAME COULD NOT BE LOCATED IN CATALOG

Explanation: The catalog locate for this dataset name was unsuccessful.
System action: EQQPDLF terminates; no object is purged.
User response: Datasets that are to be handled by Tivoli OPC Hiperbatch support must be cataloged, because the
JCL invoking EQQPDLF is distributed to all systems where DLF is running, according to routing information in the
JCL. You should expect this return code when EQQPDLF executes on a system where the DLF object does not exist.
08

THE DATASET NAME PASSED HAS AN INVALID LENGTH

Explanation: The dataset name passed to EQQPDLF is either of length 0 or longer than 44 characters.
System action: EQQPDLF terminates without further processing.
User response: Verify that EQQPDLF was invoked with a valid Tivoli OPC special resource name.
40

DLF IS NOT ACTIVE

Explanation: EQQPDLF received return code 40 from the COFSDONO macro, indicating that DLF is not active.
System action: EQQPDLF terminates without further processing.
User response: Start DLF if it should be active on this system, or update the file in EQQPROC with ddname JCLIN
to avoid routing jobs to this system.
44

UNEXPECTED ERROR IN DLF

Explanation: EQQPDLF received return code 44 from the COFSDONO macro, indicating that an unexpected error
occurred in DLF when processing the purge request.
System action: EQQPDLF terminates without further processing.
User response: Contact your system programmer.

549

EQQPURGE EQQPURGE

EQQPURGE Batch Program WTO Messages
If EQQPURGE receives invalid input, one of the following WTO's is written to the operator console.

EQQPURGE PARAMETER CARD SPECIFIES AN INVALID NAME
Explanation: The object name passed to EQQPURGE is either of length 0 or longer than 44 characters.
System action: The JCL from the JCLIN dataset is neither substituted nor written to the internal reader.
User response: Verify that EQQPROC has been started by Tivoli OPC.
EQQPURGE ERROR OPENING FILE WITH DDNAME JCLIN
Explanation: EQQPURGE could not open input file JCLIN.
System action: EQQPURGE terminates.
User response: Verify that the JCLIN statement is present in EQQPROC.
EQQPURGE INVALID JCLIN RECORD LENGTH, MUST BE 80
Explanation: The record length of the dataset with ddname JCLIN is not 80.
System action: EQQPURGE terminates; no JCL is processed.
User response: Reallocate JCLIN with the correct record length.
EQQPURGE ERROR OPENING INTERNAL READER
Explanation: EQQPURGE could not open JES internal reader dataset.
System action: EQQPURGE terminates; no JCL is processed.
User response: Verify that the JCLOUT statement is present and correctly specified in EQQPROC.

550

Communicating Your Comments to IBM
Tivoli Operations Planning and Control
Messages and Codes
Version 2 Release 3
Publication No. SH19-4480-02
If you especially like or dislike anything about this book, please use one of the methods
listed below to send your comments to IBM. Whichever method you choose, make sure you
send your name, address, and telephone number if you would like a reply.
Feel free to comment on specific errors or omissions, accuracy, organization, subject matter,
or completeness of this book. However, the comments you send should pertain to only the
information in this manual and the way in which the information is presented. To request
additional publications, or to ask questions or make comments about the functions of IBM
products or systems, you should talk to your IBM representative or to your IBM authorized
remarketer.
When you send comments to IBM, you grant IBM a nonexclusive right to use or distribute
your comments in any way it believes appropriate without incurring any obligation to you.
If you prefer to send comments by mail, use the reader's comment form (RCF) at the back of
this book. If you wish, you can give the RCF to the local branch office or IBM representative
for postage-paid mailing.
If you prefer to send comments by fax, use this number, which is in Italy:
39+06+596+62077
If you prefer to send comments electronically, use this network ID:
ROMERCF at VNET.IBM.COM
Make sure to include the following in your note:
Title and publication number of this book
Page number or topic to which your comment applies

Help us help you!
Tivoli Operations Planning and Control
Messages and Codes
Version 2 Release 3
Publication No. SH19-4480-02
We hope you find this publication useful, readable and technically accurate, but only you can tell us! Your
comments and suggestions will help us improve our technical publications. Please take a few minutes to
let us know what you think by completing this form.
Overall, how satisfied are you with the information in this book?

How satisfied are you that the information in this book is:
Accurate
Complete
Easy to find
Easy to understand
Well organized
Applicable to your task

Satisfied

Dissatisfied

Satisfied

Dissatisfied

Ø
Ø
Ø
Ø
Ø
Ø

Specific Comments or Problems:

Please tell us how we can improve this book:

Thank you for your response. When you send information to IBM, you grant IBM the right to use or
distribute the information without incurring any obligation to you. You of course retain the right to use the
information in any way you choose.

Name

Company or Organization

Phone No.

Address

Help us help you!
SH19-4480-02

Fold and Tape

IBM

Please do not staple

Cut or Fold
Along Line

Fold and Tape

PLACE
POSTAGE
STAMP
HERE

Tivoli OPC Information Development
Rome Tivoli Laboratory
IBM Italia S.p.A.
Via Sciangai, 53
00144 Rome
Italy

Fold and Tape

SH19-4480-02

Please do not staple

Fold and Tape

Cut or Fold
Along Line

IBM



Program Number: 5697-OPC
Printed in Denmark by IBM Danmark A/S

SH19-448ð-ð2

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 582
Create Date                     : 1999:11:18 17:27:02
Producer                        : Acrobat Distiller 3.01 for Windows
Creator                         : SCRIPT/VS 4.0.0: DEVICE PSA CHARS PSFTR
Title                           : EQQM1MST

EXIF Metadata provided by EXIF.tools

EQQM1MST SH19 4480 01 02

Navigation menu

Versions of this User Manual:

Views

Navigation