AT Commands Set SIM7500 SIM7600 Series Command Manual V1.07
User Manual:
Open the PDF directly: View PDF 
.
Page Count: 413
| Download | |
| Open PDF In Browser | View PDF |
E FI L AL Series_AT SI M C O M C O N FI D EN TI SIM7500_SIM7600 Command Manual _V1.07 SIM7500_SIM7600 Series_AT Command Manual Version: 1.07 Date: 2017-12-25 Status: Release Document ID: SIM7500_SIM7600 Series_AT Command Manual_V1.07 FI L Document Title: E Smart Machine Smart Decision AL General Notes FI D EN TI SIMCom offers this information as a service to its customers, to support application and engineering efforts that use the products designed by SIMCom. The information provided is based upon requirements specifically provided to SIMCom by the customers. SIMCom has not undertaken any independent search for additional relevant information, including any information that may be in the customer’s possession. Furthermore, system validation of this product designed by SIMCom within a larger electronic system remains the responsibility of the customer or the customer’s system integrator. All specifications supplied herein are subject to change. Copyright C O N This document contains proprietary technical information which is the property of SIMCom Limited., copying of this document and giving it to others and the using or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. All rights reserved in the event of grant of a patent or the registration of a utility model or design. All specification supplied herein are subject to change without notice at any time. SI M C O M Copyright © Shanghai SIMCom Wireless Solutions Ltd. 2017 SIM7500_SIM7600 Series_AT Command Manual_V1.07 1 2017-12-25 Smart Machine Smart Decision V1.00 2016-07-08 V1.01 2016-07-21 5.5 AT+CCUG Add note. V1.01 2016-07-21 5.6 AT+CUSD Add note. V1.01 2016-07-21 5.7 AT+CAOC Add note. V1.01 2016-07-21 5.8 AT+CSSN Add note. V1.01 2016-07-21 11.2 AT+STGI Add PDU format support V1.01 2016-07-21 11.3 AT+STGR Add PDU format support V1.01 2016-07-21 11.6 AT+STENV Add this command V1.01 2016-07-21 11.7 AT+STSM V1.02 2016-07-27 11.7 AT+STSM V1.02 2016-07-27 5.13 AT+CNAOP V1.02 2016-07-27 5.18 AT+CTZU Modify this command V1.02 2016-07-27 5.19 AT+CTZR Modify this command V1.02 2016-07-27 5.16 AT+CPSI Modify this command V1.02 2016-07-27 9.15 AT+CGAUTH Modify this command V1.02 2016-07-27 Chapter 15 Delete the CSOCK* Command V1.02 2016-07-27 3.21 AT&F Modify this command V1.02 2016-07-28 6.25 AT+CACDBFN Modify this command V1.02 2016-07-29 5.18 AT+CTZU Modify this command V1.02 2016-07-29 5.18 AT+CTZR Modify this command V1.02 2016-07-29 6.24 AT+SIDET Modify this command V1.02 2016-07-29 5.20 AT+NETMODE Modify this command,PIN->NO V1.02 2016-07-29 12.5 AT+CGFUNC Modify this command V1.02 2016-07-29 12.6 AT+CGDRT Modify this command V.1.02 2016-07-29 12.7 AT+CGGRTV Modify this command V.1.02 2016-07-29 12.8 AT+CGSETV Modify this command V1.02 2016-07-29 5.15 AT+CPSI Modify this command V1.02 2016-07-29 11.2 AT+STGI Modify this command V1.02 2016-07-29 11.7 AT+STSM Modify this command C M SI Chapter What is new E Date O Version M Version History EN TI AL FI L New version Add this command C O N FI D Modify this command SIM7500_SIM7600 Series_AT Command Manual_V1.07 Modify this command 2 2017-12-25 Smart Machine Smart Decision V1.02 2016-07-29 Delete CSD function V1.02 2016-08-05 11.5 AT+STKFMT pdu format V1.02 2016-08-05 5.15 AT+CPSI Inquiring UE Modify 1xlte system information V1.02 2016-08-05 9.11 AT+CGDATA state V1.02 2016-08-05 9.3 AT+CGACT PDP context Modify cid activate or deactivate V1.02 2016-08-05 7.9 AT+CNMI New message Modify default value indications to TE V1.02 2016-08-12 7.25 AT+CMGP Set Modify format cdma/evdo text mode parameters V1.02 2016-08-16 15.7 Common Channel Service Modify these commands 15.8 SSL Certificate & Key management V1.02 2016-08-16 6.29 AT+CTXVOL 6.30 AT+CTXMICGAIN V1.02 2016-08-17 11.7 AT+STSM Get STK Setup Modify this command Menu List with PDU Mode V1.02 2016-08-17 5.14 AT+CNSDP Preferred Delete this command service domain selection V1.02 2016-08-19 AT+CMGENREF AT+CMSSEXM AT+CSALPHA Delete this command V1.02 2016-08-26 15.1.6 AT+CPINGSTOP Modify this command V1.02 2016-08-30 5.19 AT+NETMODE Modify this command V1.02 2016-09-05 3.21 AT&F Modify this command Set STK Modify this command EN TI AL FI L E Enter data Modify cid FI D Add commands N O C M O Delete CSD function 2016-09-05 10.6 AT+CMTE Modify test command V1.02 2016-09-05 15.7.3 AT+CCHOPEN 15.7.7 AT+CCHSET 15.7.8 AT+CCHADDR Modify these commands V1.02 2016-09-05 15.7.10 Unsolicited common Add error code description channel commandCodes V1.02 2016-09-06 6.27 6.28 6.29 6.30 V1.02 2016-09-06 6.31 AT+CRXVOL SI M C V1.02 AT+CMICGAIN AT+COUTGAIN AT+CTXVOL AT+CTXMICGAIN SIM7500_SIM7600 Series_AT Command Manual_V1.07 Modify these commands Add these commands 3 2017-12-25 AT+CECH AT+CECDT AT+CECWB AT+CNSN AT+CNSLIM AT+CFNSMOD AT+CFNSIN AT+CFNSLVL AT+CGDRT AT+CGSETV AT+CGGETV AT+CGISR FI L 6.32 6.33 6.34 6.35 6.36 6.37 6.38 6.39 E Smart Machine Smart Decision 2016-09-06 12.6 12.7 12.8 12.9 Modify these commands V1.02 2016-09-07 9.15 AT+CGAUTH Modify read command and test command V1.02 2016-09-09 5.11 AT+CNMP Modify this command V1.02 2016-09-09 3.21 AT&F Modify this command V1.02 2016-09-09 11.5 AT+STKFMT V1.02 2016-09-13 6.24 AT+SIDET V1.02 2016-09-13 4.23 AT+CUSBPIDSWITCH Add this command V1.02 2016-09-14 6.22 AT+CSDVC Modify this command V1.02 2016-09-18 6.40 AT+CECRX 6.41 AT+CNLPPG 6.42 AT+CNLPPL Add these commands V1.02 2016-09-19 7.2 AT+CPMS Modify this command V1.02 2016-09-21 V1.02 EN TI AL V1.02 Modify this command C O N FI D Modify this command Modify this command 2016-09-21 10.9 AT+CUSBDELETEADB Delete this command V1.02 2016-09-22 6.43 AT+CECM Add this command V1.02 2016-09-22 15.7.6 AT+CCHRECV Modify this command O M 10.6 AT+CMTE 2016-09-22 C V1.02 2016-09-26 6.25 AT+CACDBFN Modify this command V1.02 2016-09-27 15.2.10 AT+CIPFILTERSET Modify this command V1.02 2016-09-28 3.33 AT+CIMI Modify this command V1.02 2016-09-28 3.34 AT+CIMIM Add this command V1.02 2016-09-28 7.13 AT+CMGS 7.15 AT+CMGW 7.20 AT+CMGSEX Modify these commands V1.02 2016-10-08 3.21 AT&F Modify this command SI M V1.02 15.7.10 Unsolicited common Modify the format channel command Codes SIM7500_SIM7600 Series_AT Command Manual_V1.07 4 2017-12-25 9.6 AT+CGTFT Modify this command V1.02 2016-10-13 9.4 AT+CGDCONT Modify this command V1.02 2016-10-13 16.8 AT+CGPSNMEA Modify this command V1.02 2016-10-17 9.3 AT+CGACT 9.7 AT+CGQREQ 9.8 AT+CGEQREQ 9.9 AT+CGQMIN 9.10 AT+CGEQMIN 9.11 AT+CGDATA 9.12 AT+CGPADDR 9.15 AT+CGAUTH 15.1.12 AT+CDNSSRV Modify these commands V1.02 2016-10-18 7.2 AT+CPMS Modify this command V1.02 2016-10-19 3.21 AT&F Modify this command V1.02 2016-10-20 9.8 AT+CGEQREQ 9.10 AT+CGEQMIN Modify these commands V1.02 2016-10-20 12.9 AT+CGISR V1.02 2016-10-24 5.13 AT+CNAOP V1.02 2016-10-24 3.21 AT&F V1.02 2016-10-28 16.20 AT+CGPSMODE Add this command V1.02 2016-11-09 11.4 AT+STK Modify this command V1.02 2016-11-04 6.22 AT+CSDVC Modify this command V1.02 2016-11-04 16.21 AT+CBDS Add this command V1.02 2016-11-04 15.3.9 AT+CFTPGET 15.3.11 AT+CFTPLIST Modify these commands V1.02 2016-11-04 15.3.15 AT+CFTPCACHERD Add this command V1.02 2016-11-08 4.23 AT+CUSBPIDSWITCH Modify this command V1.02 2016-11-10 3.21 AT&F Modify this command 2016-11-10 9.3 AT+CGACT 9.11 AT+CGDATA Modify these commands 2016-11-10 15.1.1 AT+CSOCKSETPN Modify this command V1.03 2016-11-11 4.23 AT+CUSBPIDSWITCH Modify this command V1.03 2016-11-17 16.21 AT+CBDS Modify this command V1.03 2016-11-17 16.15 AT+CGPSINFOCFG Modify this command V1.03 2016-11-24 15.3.9 AT+CFTPGET 15.3.11 AT+CFTPLIST 15.3.15 AT+CFTPCACHERD Modify these commands C M V1.02 SI V1.02 EN TI AL FI L E 2016-10-12 O V1.02 M Smart Machine Smart Decision C O N FI D Modify this command SIM7500_SIM7600 Series_AT Command Manual_V1.07 Modify this command Modify this command 5 2017-12-25 Smart Machine Smart Decision 2016-11-24 15.7.3 AT+CCHOPEN 15.7.6 AT+CCHRECV Modify these commands V1.03 2016-12-12 9.3 AT+CGACT Modify this command V1.03 2016-12-21 9.4 AT+CGDCONT Modify this command V1.03 2016-12-23 3.21 AT&F 5.11 AT+CNBP 5.14 AT+CPSI Modify these commands V1.03 2017-1-4 9.12 AT+CGPADDR Modify this command V1.03 2017-1-11 16.10 AT+CGPSFTM Modify this command V1.03 2017-1-12 5.14 AT+CPSI Modify this command V1.04 2017-1-20 15.7.6 AT+CCHRECV Modify this command V1.04 2017-2-9 6.26 AT+CPCMREG 6.43 AT+CECM Modify these commands V1.04 2017-2-9 15.7.6 AT+CCHRECV Modify this command V1.04 2017-2-20 5.12 AT+CNBP V1.04 2017-2-21 3.12 AT+IPR 12.1 AT+IPREX V1.04 2017-3-8 3.21 AT&F V1.04 2017-3-28 17.24 AT+CLBS V1.04 2017-4-13 17.9 AT+CGPSNEMARATE Add this command V1.04 2017-4-14 15.5 HTTPS Add this chapter V1.04 2017-4-19 17.25 AT+CLBSCFG Add this command V1.04 2017-5-4 4.23 AT+CUSBPIDSWITCH Modify this command V1.04 2017-5-11 17.26 AT+CASSISTLOC Add this command V1.04 2017-5-17 EN TI AL FI L E V1.03 Modify this command Modify this command Add this command 16 AT Commands Open/Close Network V1.04 2017-5-24 18 Audio Application Commands Add this chapter V1.04 2017-5-25 15.7 SMTP Delete this chapter V1.04 2017-5-25 15.4 Add this chapter V1.05 2017-6-19 15.6 HTTPS V1.05 2017-7-3 16.4 Unsolicited CNETSTART/ Add this command CNETSTOP Codes V1.05 2017-7-3 17.24 AT+CLBS 17.25 AT+CLBSCFG Modify these commands V1.05 2017-7-10 14.2 AT+CFTRANTX Modify this command V1.05 2017-7-10 13 SI M C O M C O N FI D Modify these commands FTPS for Add this chapter Modify HTTPS commands AT Commands for File Modify the description SIM7500_SIM7600 Series_AT Command Manual_V1.07 6 2017-12-25 Smart Machine Smart Decision 2017-7-11 6.44 AT+CPCMFRM Add this command V1.05 2017-7-14 15.8.9 AT+CCERTVERIFY Add this command V1.05 2017-8-25 7.12 AT+CMGR Modify this command V1.05 2017-9-5 5.15 AT+CNSMOD Modify this command V1.05 2017-9-5 5.14 AT+CPSI Modify this command V1.06 2017-10-13 1.1 Modify scope V1.06 2017-10-13 17.24 AT+CLBS Modify this command V1.07 2017-10-16 15.3.2 AT+CFTPMODE Modify this command V1.07 2017-10-16 15.6.4 AT+CHTTPSCLSE Modify this command V1.07 2017-11-3 7.9 AT+CNMI Modify this command V1.07 2017-11-7 12.2 AT+CFGRI Modify this command V1.07 2017-11-13 17.25 AT+CLBS Modify this command V1.07 2017-11-13 15.8 NTP V1.07 2017-11-13 17.23 AT+CGNSSINFO V1.07 2017-12-14 4.23 AT+CUSBPIDSWITCH V1.07 2017-12-15 17.25 AT+CLBS EN TI AL Scope FI L V1.05 E System Add this chapter Modify this command Modify this command SI M C O M C O N FI D Add this command SIM7500_SIM7600 Series_AT Command Manual_V1.07 7 2017-12-25 Smart Machine Smart Decision Contents V e r s i o n H i s t o r y ........................................................................................................................... 2 C o n t e n t s ............................................................................................................................................ 8 1 Introduction.................................................................................................................................... 17 References ............................................................................................................................................ 17 1.3 Terms and abbreviations ....................................................................................................................... 17 1.4 Definitions and conventions ................................................................................................................. 18 FI L E 1.2 AT Interface Synopsis .................................................................................................................... 20 Interface settings .................................................................................................................................. 20 2.2 AT command syntax ............................................................................................................................. 20 2.3 Information responses .......................................................................................................................... 21 AL 2.1 TI AT Commands According V.25TER .............................................................................................. 22 3.1 A/ 3.2 ATD Repeat last command.................................................................................................................... 22 3.3 ATD> 3.4 ATD> Originate call from active memory (1)............................................................................. 25 3.5 ATD> Originate call from active memory (2)........................................................................... 26 3.6 ATA Call answer ................................................................................................................................ 27 3.7 ATH Disconnect existing call ............................................................................................................ 28 3.8 ATS0 Automatic answer incoming call ............................................................................................. 28 3.9 +++ Switch from data mode to command mode ............................................................................... 29 3.10 ATO Switch from command mode to data mode .............................................................................. 30 3.11 ATI Display product identification information ................................................................................ 30 3.12 AT+IPR Set local baud rate temporarily ........................................................................................... 32 3.13 AT+ICF Set control character framing .............................................................................................. 33 3.14 AT+IFC Set local data flow control................................................................................................... 34 3.15 AT&C 3.16 ATE 3.17 AT&V Display current configuration ................................................................................................ 36 3.18 AT&D EN Dial command .......................................................................................................................... 22 C O N FI D Originate call from specified memory ................................................................. 24 Set DCD function mode......................................................................................................... 35 Enable command echo .............................................................................................................. 36 C O 3 Scope .................................................................................................................................................... 17 M 2 1.1 Set DTR function mode ......................................................................................................... 37 AT&S 3.20 ATV Set result code format mode ..................................................................................................... 38 3.21 AT&F 3.22 ATQ Set Result Code Presentation Mode ......................................................................................... 40 3.23 ATX Set CONNECT Result Code Format ........................................................................................ 40 3.24 AT\V Set CONNECT Result Code Format About Protocol .............................................................. 41 3.25 AT&E 3.26 AT&W Save the user setting to ME .................................................................................................. 43 3.27 ATZ 3.28 AT+CGMI Request manufacturer identification ............................................................................... 44 3.29 AT+CGMM Request model identification ........................................................................................ 45 SI M 3.19 Set DSR function mode .......................................................................................................... 37 Set all current parameters to manufacturer defaults ............................................................... 39 Set CONNECT Result Code Format About Speed ................................................................ 42 Restore the user setting from ME.............................................................................................. 43 SIM7500_SIM7600 Series_AT Command Manual_V1.07 8 2017-12-25 Smart Machine Smart Decision Request revision identification ...................................................................................... 45 3.31 AT+CGSN Request product serial number identification ................................................................. 46 3.32 AT+CSCS Select TE character set .................................................................................................... 47 3.33 AT+CIMI Request international mobile subscriber identity ............................................................. 48 3.34 AT+CIMIM 3.35 AT+GCAP Request overall capabilities ............................................................................................ 49 E Request another international mobile subscriber identity ............................................. 48 AT Commands for Status Control .................................................................................................. 51 AT+CFUN Set phone functionality ................................................................................................... 51 4.2 AT+CPIN Enter PIN.......................................................................................................................... 52 4.3 AT+CICCID 4.4 AT+CSIM Generic SIM access ......................................................................................................... 54 4.5 AT+CRSM Restricted SIM access .................................................................................................... 55 4.6 AT+SPIC Times remain to input SIM PIN/PUK ............................................................................... 59 4.7 AT+CSPN Get service provider name from SIM .............................................................................. 60 4.8 AT+CSQ Query signal quality .......................................................................................................... 61 4.9 AT+AUTOCSQ 4.10 AT+CSQDELTA Set RSSI delta change threshold ............................................................................ 63 4.11 AT+CATR Configure URC destination interface .............................................................................. 64 4.12 AT+CPOF Power down the module .................................................................................................. 65 4.13 AT+CRESET 4.14 AT+CACM Accumulated call meter ................................................................................................. 66 4.15 AT+CAMM Accumulated call meter maximum ............................................................................... 67 4.16 AT+CPUC Price per unit and currency table..................................................................................... 68 4.17 AT+CCLK Real time clock management .......................................................................................... 69 4.18 AT+CMEE Report mobile equipment error ...................................................................................... 70 4.19 AT+CPAS Phone activity status ........................................................................................................ 71 4.20 AT+SIMEI Set IMEI for the module ................................................................................................. 72 4.21 AT+SMEID Request Mobile Equipment Identifier ........................................................................... 73 4.22 AT+CSVM Voice Mail Subscriber number ....................................................................................... 74 4.23 AT+CUSBPIDSWITCH 4.24 Indication of EONS .............................................................................................................................. 76 4.25 Indication of Voice Mail ....................................................................................................................... 76 FI L 4.1 TI AL Read ICCID from SIM card......................................................................................... 53 D EN Set CSQ report........................................................................................................ 62 M C O N FI Reset the module ........................................................................................................ 66 Change module’s PID................................................................................ 75 AT Commands for Network ........................................................................................................... 77 C 5 AT+CGMR O 4 3.30 AT+CREG Network registration ....................................................................................................... 77 5.2 AT+COPS Operator selection ........................................................................................................... 78 5.3 AT+CLCK Facility lock .................................................................................................................... 81 5.4 AT+CPWD Change password ........................................................................................................... 82 5.5 AT+CCUG Closed user group ........................................................................................................... 84 5.6 AT+CUSD Unstructured supplementary service data ....................................................................... 85 5.7 AT+CAOC Advice of charge ............................................................................................................ 86 5.8 AT+CSSN Supplementary service notifications................................................................................ 87 5.9 AT+CPOL Preferred operator list ...................................................................................................... 89 5.10 AT+COPN SI M 5.1 Read operator names ...................................................................................................... 91 SIM7500_SIM7600 Series_AT Command Manual_V1.07 9 2017-12-25 Smart Machine Smart Decision AT+CNMP Preferred mode selection ................................................................................................ 92 5.12 AT+CNBP Preferred band selection .................................................................................................. 93 5.13 AT+CNAOP Acquisitions order preference ...................................................................................... 96 5.14 AT+CPSI 5.15 AT+CNSMOD 5.16 AT+CEREG 5.17 AT+CTZU Automatic time and time zone update........................................................................... 104 5.18 AT+CTZR Time and time zone reporting ....................................................................................... 105 5.19 AT+NETMODE Inquiring UE system information ..................................................................................... 97 Show network system mode ................................................................................... 101 FI L E EPS network registration status .................................................................................. 102 WCDMA & TDSCDMA mode select .................................................................. 106 AT Commands for Call Control ................................................................................................... 108 AT+CVHU Voice hang up control .................................................................................................. 108 6.2 AT+CHUP Hang up call .................................................................................................................. 109 6.3 AT+CBST 6.4 AT+CRLP Radio link protocol ......................................................................................................... 111 6.5 AT+CR 6.6 AT+CRC 6.7 AT+CLCC List current calls.............................................................................................................115 6.8 AT+CEER Extended error report .....................................................................................................117 6.9 AT+CCWA Call waiting ...................................................................................................................118 6.10 AT+CHLD Call related supplementary services ..............................................................................119 6.11 AT+CCFC Call forwarding number and conditions ........................................................................ 121 6.12 AT+CLIP Calling line identification presentation ........................................................................... 122 6.13 AT+CLIR 6.14 AT+COLP Connected line identification presentation .................................................................... 125 6.15 AT+VTS DTMF and tone generation .............................................................................................. 127 6.16 AT+VTD Tone duration .................................................................................................................. 128 6.17 AT+CSTA Select type of address .................................................................................................... 129 6.18 AT+CMOD Call mode .................................................................................................................... 130 6.19 AT+VMUTE Speaker mute control................................................................................................. 131 6.20 AT+CMUT 6.21 AT+MORING 6.22 AT+CSDVC 6.23 AT+CLVL Loudspeaker volume level ............................................................................................. 134 6.24 AT+SIDET AL 6.1 TI Select bearer service type .............................................................................................. 109 Service reporting control.....................................................................................................112 FI D EN Cellular result codes .........................................................................................................114 C M C M O N Calling line identification restriction .............................................................................. 124 O 6 5.11 Microphone mute control............................................................................................. 132 Enable or disable report MO ring URC................................................................... 132 Switch voice channel device ...................................................................................... 133 Set sidetone .................................................................................................................. 135 AT+CACDBFN Change default ACDB filename ........................................................................... 136 6.26 AT+CPCMREG USB audio control ................................................................................................ 137 6.27 AT+CMICGAIN Adjust mic gain ................................................................................................... 138 6.28 AT+COUTGAIN Adjust out gain ................................................................................................... 139 6.29 AT+CTXVOL Adjust TX voice mic volume .................................................................................. 139 6.30 AT+CTXMICGAIN 6.31 AT+CRXVOL Adjust RX voice output speaker volume................................................................. 141 6.32 AT+CECH 6.33 AT+CECDT SI 6.25 Adjust TX voice mic gain .............................................................................. 140 Inhibit far-end echo....................................................................................................... 142 Inhibit echo during doubletalk ................................................................................... 143 SIM7500_SIM7600 Series_AT Command Manual_V1.07 10 2017-12-25 Smart Machine Smart Decision AT+CECWB 6.35 AT+CNSN 6.36 AT+CNSLIM 6.37 AT+CFNSMOD 6.38 AT+CFNSIN 6.39 AT+CFNSLVL Adjust parameter fnsTargetNS of RX_VOICE_FNS ............................................. 148 6.40 AT+CECRX Enable or disable VOICE_MOD_ENABLE .............................................................. 149 6.41 AT+CNLPPG Modify the NLPP_gain in DSP ................................................................................ 150 6.42 AT+CNLPPL Modify the NLPP_limit in DSP ................................................................................ 150 6.43 AT+CECM 6.44 AT+CPCMFRM MIC NOISE suppression .......................................................................................... 145 Adjust parameter fnsMode of RX_VOICE_FNS ................................................. 146 FI L E Adjust parameter fnsInputGain of RX_VOICE_FNS ............................................... 147 Adjust echo canceller ................................................................................................... 151 Set usb audio sample rate to 16k bit .................................................................... 152 AL Select message service.................................................................................................. 154 7.2 AT+CPMS Preferred message storage ............................................................................................ 155 7.3 AT+CMGF Select SMS message format ......................................................................................... 157 7.4 AT+CSCA SMS service centre address ........................................................................................... 158 7.5 AT+CSCB 7.6 AT+CSMP Set text mode parameters .............................................................................................. 160 7.7 AT+CSDH 7.8 AT+CNMA New message acknowledgement to ME/TA ................................................................ 162 7.9 AT+CNMI 7.10 AT+CGSMS 7.11 AT+CMGL List SMS messages from preferred store ..................................................................... 166 7.12 AT+CMGR Read message .............................................................................................................. 170 7.13 AT+CMGS Send message ............................................................................................................... 174 7.14 AT+CMSS Send message from storage .......................................................................................... 175 7.15 AT+CMGW Write message to memory .......................................................................................... 176 7.16 AT+CMGD 7.17 AT+CMGMT 7.18 AT+CMVP Set message valid period .............................................................................................. 180 7.19 AT+CMGRD Read and delete message .......................................................................................... 181 7.20 AT+CMGSEX Send message .......................................................................................................... 182 7.21 AT+CMSSEX Send multi messages from storage .......................................................................... 183 7.22 AT+CMGP Set cdma/evdo text mode parameters ........................................................................... 184 EN TI AT+CSMS Select cell broadcast message indication ...................................................................... 159 D Show text mode parameters .......................................................................................... 161 FI New message indications to TE .................................................................................... 163 C O N Select service for MO SMS messages ....................................................................... 165 Delete message ............................................................................................................ 178 Change message status ............................................................................................. 179 M C M 9 MIC NOISE suppression .............................................................................................. 145 7.1 AT Commands for Phonebook ..................................................................................................... 186 8.1 AT+CPBS Select phonebook memory storage ................................................................................ 186 8.2 AT+CPBR Read phonebook entries ................................................................................................ 187 8.3 AT+CPBF Find phonebook entries ................................................................................................. 189 8.4 AT+CPBW Write phonebook entry ................................................................................................. 190 8.5 AT+CNUM SI 8 Inhibit echo in the high band ..................................................................................... 144 AT Commands for SMS............................................................................................................... 154 O 7 6.34 Subscriber number....................................................................................................... 191 AT Commands for GPRS............................................................................................................. 193 9.1 AT+CGREG GPRS network registration status .............................................................................. 193 9.2 AT+CGATT Packet domain attach or detach .................................................................................. 194 SIM7500_SIM7600 Series_AT Command Manual_V1.07 11 2017-12-25 Smart Machine Smart Decision 9.3 AT+CGACT 9.4 AT+CGDCONT Define PDP context .............................................................................................. 196 9.5 AT+CGDSCONT Define Secondary PDP Context ......................................................................... 198 9.6 AT+CGTFT Traffic Flow Template ................................................................................................ 201 9.7 AT+CGQREQ 9.8 AT+CGEQREQ 9.9 AT+CGQMIN 9.10 AT+CGEQMIN 9.11 AT+CGDATA Enter data state......................................................................................................... 218 9.12 AT+CGPADDR Show PDP address ................................................................................................ 219 9.13 AT+CGCLASS GPRS mobile station class .................................................................................. 221 9.14 AT+CGEREP GPRS event reporting .............................................................................................. 222 9.15 AT+CGAUTH Quality of service profile (requested) ..................................................................... 204 E 3G quality of service profile (requested) .............................................................. 206 Quality of service profile (minimum acceptable) .....................................................211 AL FI L 3G quality of service profile (minimum acceptable) ............................................ 214 Set type of authentication for PDP-IP connections of GPRS .................................. 224 Hardware Related Commands ................................................................................................. 226 TI 10 PDP context activate or deactivate ............................................................................. 195 10.1 AT+CVALARM Low and high voltage Alarm................................................................................ 226 10.2 AT+CVAUXS 10.3 AT+CVAUXV Set voltage value of the pin named VREG_AUX1 ................................................. 228 10.4 AT+CADC Read ADC value ........................................................................................................... 229 10.5 AT+CADC2 Read ADC2 value ....................................................................................................... 229 10.6 AT+CMTE D EN Set state of the pin named VREG_AUX1 ............................................................... 227 Control the module whether power shutdown when the module’s temperature upon the FI critical temperature ......................................................................................................................................... 230 AT+CPMVT Low and high voltage Power Off ............................................................................... 232 10.8 AT+CDELTA Set the module go to recovery mode ........................................................................ 233 10.9 AT+CRIIC Read values from register of IIC device ....................................................................... 233 10.10 AT+CWIIC Write values to register of IIC device .......................................................................... 234 Read the voltage value of the power supply .................................................................... 235 C 10.11 AT+CBC O N 10.7 10.12 AT+CPMUTEMP Read the temperature of the module .................................................................. 235 11 AT Commands for SIM Application Toolkit ............................................................................ 237 AT+STIN SAT Indication ................................................................................................................ 237 11.2 AT+STGI Get SAT information ...................................................................................................... 238 11.3 AT+STGR SAT respond .................................................................................................................. 241 11.4 AT+STK 11.5 AT+STKFMT Set STK pdu format ................................................................................................. 243 11.6 AT+STENV Original STK PDU Envelope Command .................................................................... 244 O M 11.1 M C STK switch ...................................................................................................................... 242 11.7 SI 12 AT+STSM Get STK Setup Menu List with PDU Mode ................................................................. 245 AT Commands for Hardware ................................................................................................... 246 12.1 AT+IPREX Set local baud rate permanently ................................................................................... 246 12.2 AT+CFGRI Indicate RI when using URC ....................................................................................... 247 12.3 AT+CSCLK Control UART Sleep ..................................................................................................... 248 12.4 AT+CMUX 12.5 AT+CGFUNC Enable/disable the function for the special GPIO ...................................................... 250 12.6 AT+CGDRT 12.7 AT+CGSETV Set the value of specified GPIO ............................................................................... 253 Enable the multiplexer over the UART ....................................................................... 249 Set the direction of specified GPIO............................................................................ 252 SIM7500_SIM7600 Series_AT Command Manual_V1.07 12 2017-12-25 Smart Machine Smart Decision 12.8 AT+CGGETV Get the value of specified GPIO.............................................................................. 253 12.9 AT+CGISR 13 Set GPIO interrupt trigger condition ........................................................................... 254 AT Commands for File System ................................................................................................ 256 AT+FSCD Select directory as current directory .............................................................................. 256 13.2 AT+FSMKDIR Make new directory in current directory ............................................................... 257 13.3 AT+FSRMDIR Delete directory in current directory ...................................................................... 258 13.4 AT+FSLS 13.5 AT+FSDEL Delete file in current directory .................................................................................... 260 13.6 AT+FSRENAME 13.7 AT+FSATTRI Request file attributes .............................................................................................. 262 13.8 AT+FSMEM Check the size of available memory .......................................................................... 263 13.9 AT+FSLOCA Select storage place .................................................................................................. 263 E 13.1 FI L List directories/files in current directory ........................................................................ 259 AL Rename file in current directory ........................................................................ 261 13.10 AT+FSCOPY Copy an appointed file ............................................................................................. 264 14.1 14.2 15 TI AT Commands for File Transmission ...................................................................................... 267 AT+CFTRANRX Transfer a file to EFS ......................................................................................... 267 AT+CFTRANTX Transfer a file from EFS to host ......................................................................... 268 EN 14 AT Commands for Internet Service ......................................................................................... 270 15.1 PDP .................................................................................................................................................... 270 AT+CSOCKSETPN 15.1.2 AT+CIPDNSSET Set DNS query parameters .......................................................................................... 271 15.1.3 AT+CDNSGIP Query the IP address of given domain name ................................................................... 272 15.1.4 AT+CDNSGHNAME 15.1.5 AT+CPING Ping destination address....................................................................................................... 274 15.1.6 AT+CPINGSTOP Stop an ongoing ping session ..................................................................................... 276 15.1.7 AT+CTCPFIN Configure TCP FIN ......................................................................................................... 277 15.1.8 AT+CTCPKA Conigure TCP heartbeat ................................................................................................... 278 15.1.9 AT+CTEUTP Set unknown incoming TCP packet echo .......................................................................... 279 15.1.10 AT+CUPURE 15.1.11 AT+CINICMPALLOW Preferred ICMP filter ......................................................................................... 281 FI N O C AT+CDNSSRV Get dns server ip address ............................................................................................... 282 TCP/UDP ........................................................................................................................................... 283 O 15.2 Query the domain name of given IP address ........................................................ 273 Set UDP port unreachable ICMP echo ............................................................................. 280 M 15.1.12 Set active PDP context’s profile number ................................................................ 270 D 15.1.1 AT+CIPCCFG Configure parameters of socket ....................................................................................... 283 15.2.2 AT+CIPSENDMODE 15.2.3 AT+CIPTIMEOUT Set TCP/IP timeout value............................................................................................ 286 M C 15.2.1 Select sending mode ............................................................................................ 285 AT+CIPHEAD 15.2.5 AT+CIPSRIP Show Remote IP address and Port ..................................................................................... 288 15.2.6 AT+CIPMODE 15.2.7 AT+NETOPEN Open socket ................................................................................................................... 290 15.2.8 AT+NETCLOSE 15.2.9 AT+IPADDR 15.2.10 AT+CIPFILTERSET IP filter configuration ............................................................................................ 293 15.2.11 AT+SERVERSTART Startup TCP server ................................................................................................ 295 15.2.12 AT+SERVERSTOP Stop TCP server ....................................................................................................... 296 SI 15.2.4 Add an IP head when receiving data ............................................................................... 287 Select TCP/IP application mode .................................................................................... 289 Close socket................................................................................................................. 291 Inquire socket PDP address ............................................................................................... 292 SIM7500_SIM7600 Series_AT Command Manual_V1.07 13 2017-12-25 Smart Machine Smart Decision 15.2.13 AT+CIPOPEN Establish connection in multi-socket mode ..................................................................... 297 15.2.14 AT+CIPSEND Send data through TCP or UDP connection .................................................................... 299 15.2.15 AT+CIPRXGET Get the network data manually ..................................................................................... 302 15.2.16 AT+CIPCLOSE 15.2.17 AT+CIPSTAT Inquire the total size of data sent or received ................................................................... 306 15.2.18 Information elements related to TCP/IP ..................................................................................................... 307 15.2.19 Unsolicited TCP/IP command Codes ................................................................................................ 307 E FTP ..................................................................................................................................................... 308 FI L 15.3 Close TCP or UDP socket ............................................................................................. 304 15.3.1 AT+CFTPPORT Set FTP server port ....................................................................................................... 308 15.3.2 AT+CFTPMODE 15.3.3 AT+CFTPTYPE Set FTP type ................................................................................................................. 309 15.3.4 AT+CFTPSERV Set FTP server domain name or IP address................................................................... 310 15.3.5 AT+CFTPUN Set user name for FTP access ............................................................................................311 15.3.6 AT+CFTPPW Set user password for FTP access ..................................................................................... 312 15.3.7 AT+CFTPGETFILE Get a file from FTP server to EFS .......................................................................... 313 15.3.8 AT+CFTPPUTFILE Upload a file from module EFS to FTP server ....................................................... 314 15.3.9 AT+CFTPGET Get a file from FTP server and output it to SIO .............................................................. 315 15.3.10 AT+CFTPPUT Upload the DATA from SIO to FTP server ..................................................................... 317 15.3.11 AT+CFTPLIST List the items in the directory on FTP server ................................................................. 319 15.3.12 AT+CFTPMKD Create a new directory on FTP server ........................................................................... 320 15.3.13 AT+CFTPRMD Delete a directory on FTP server ................................................................................... 321 15.3.14 AT+CFTPDELE 15.3.15 AT+CFTPCACHERD 15.3.16 Unsolicited FTP Codes (Summary of CME ERROR Codes) ..................................................................... 324 AL TI EN D FI Delete a file on FTP server ........................................................................................... 322 N Output cached data to MCU ................................................................................ 322 O 15.4 Set FTP mode ............................................................................................................. 309 FTPS................................................................................................................................................... 324 AT+CFTPSSTART Acquire FTPS protocol stack ................................................................................... 324 15.4.2 AT+CFTPSSTOP Stop FTPS protocol stack ........................................................................................... 325 15.4.3 AT+CFTPSLOGIN 15.4.4 AT+CFTPSLOGOUT Logout the FTPS server ....................................................................................... 327 AT+CFTPSMKD Create a new directory on FTPS server....................................................................... 327 AT+CFTPSRMD Delete a directory on FTPS server .............................................................................. 328 AT+CFTPSDELE 15.4.8 AT+CFTPSLIST List the items in the directory on FTPS server ............................................................. 329 15.4.9 AT+CFTPSGETFILE Get a file from FTPS server to EFS ..................................................................... 331 15.4.10 AT+CFTPSPUTFILE Upload a file in module EFS to FTPS server ....................................................... 332 15.4.11 AT+CFTPSGET Get a file from FTPS server to serial port..................................................................... 334 15.4.12 AT+CFTPSPUT Put a file to FTPS server ............................................................................................... 336 15.4.13 AT+CFTPSSINGLEIP Set FTPS data socket address type...................................................................... 337 15.4.14 AT+CFTPSCACHERD 15.4.15 Unsolicited FTPS Codes ............................................................................................................................. 339 15.4.16 Unsolicited FTPS command Codes .................................................................................................. 339 SI M 15.4.7 C O 15.4.6 Login the FTPS server ............................................................................................. 326 M 15.4.5 C 15.4.1 15.5 Delete a file on FTPS server ...................................................................................... 329 Output cached data to MCU .............................................................................. 338 HTTP .................................................................................................................................................. 339 15.5.1 AT+CHTTPACT Launch a HTTP operation .......................................................................................... 339 SIM7500_SIM7600 Series_AT Command Manual_V1.07 14 2017-12-25 Smart Machine Smart Decision 15.5.2 15.6 Unsolicited HTTP codes (summary of CME ERROR codes)..................................................................... 342 HTTPS ............................................................................................................................................... 343 AT+CHTTPSSTART Acquire HTTPS protocol stack ............................................................................. 343 15.6.2 AT+CHTTPSSTOP Stop HTTPS protocol stack ..................................................................................... 343 15.6.3 AT+CHTTPSOPSE Open HTTPS session .............................................................................................. 344 15.6.4 AT+CHTTPSCLSE Close HTTPS session .............................................................................................. 345 15.6.5 AT+CHTTPSSEND Send HTTPS request .............................................................................................. 345 15.6.6 AT+CHTTPSRECV Receive HTTPS response ....................................................................................... 347 15.6.7 AT+CHTTPSSTATE 15.6.8 Unsolicited HTTPS Codes.......................................................................................................................... 349 15.6.9 Unsolicited HTTPS command Codes ............................................................................................... 349 FI L Get the state of HTTPS stack ................................................................................ 348 HTP .................................................................................................................................................... 350 AL 15.7 E 15.6.1 15.7.1 AT+CHTPSERV Set HTP server info ...................................................................................................... 350 15.7.2 AT+CHTPUPDATE 15.7.3 Unsolicited HTP Codes .............................................................................................................................. 352 TI NTP .................................................................................................................................................... 352 EN 15.8 Updating date time using HTP protocol ................................................................. 351 15.8.1 AT+CNTP update system time ................................................................................................................ 352 15.8.2 Unsolicited NTP Codes .............................................................................................................................. 353 Common Channel Service .................................................................................................................. 353 D 15.9 AT+CCHSTART Acquire common channel service ................................................................................ 354 15.9.2 AT+CCHSTOP Stop common channel service ........................................................................................ 354 15.9.3 AT+CCHOPEN Open a channel .............................................................................................................. 355 15.9.4 AT+CCHCLOSE Close a channel ........................................................................................................... 356 15.9.5 AT+CCHSEND Send data to peer ........................................................................................................... 357 15.9.6 AT+CCHRECV Receive data from the channel ...................................................................................... 358 15.9.7 AT+CCHSET Set the parameter of common channel service.................................................................. 359 15.9.8 AT+CCHADDR 15.9.9 AT+CCERTVERIFY Set SSL server cert verify flag .............................................................................. 361 15.9.10 Unsolicited common channel Codes ........................................................................................................... 362 N O C Get the IPv4 address for common channel service ....................................................... 360 M 15.9.11 FI 15.9.1 Unsolicited common channel command Codes ................................................................................ 362 O 15.10 SSL Certificate & Key Management .................................................................................................. 363 AT+CCERTDOWN 15.10.2 AT+CCERTLIST List certificate/key in module ..................................................................................... 363 15.10.3 AT+CCERTDELE M C 15.10.1 16 Transfer a certificate file to Module ........................................................................ 363 Delete certificate/key in the module .......................................................................... 364 AT Commands for Open/Close Network ................................................................................. 366 AT+CNETSTART 16.2 AT+CNETSTOP Close network ...................................................................................................... 367 16.3 AT+CNETIPADDR 16.4 Unsolicited CNETSTART/CNETSTOP Codes .................................................................................. 368 SI 16.1 17 Open network .................................................................................................... 366 Inquire PDP address ....................................................................................... 368 AT Commands for GPS ........................................................................................................... 370 17.1 AT+CGPS Start/Stop GPS session .................................................................................................. 370 17.2 AT+CGPSINFO Get GPS fixed position information ..................................................................... 371 17.3 AT+CGPSCOLD Cold start GPS .................................................................................................... 373 SIM7500_SIM7600 Series_AT Command Manual_V1.07 15 2017-12-25 Smart Machine Smart Decision 17.4 AT+CGPSHOT Hot start GPS ........................................................................................................ 373 17.5 AT+CGPSURL Set AGPS default server URL ............................................................................... 374 17.6 AT+CGPSSSL Set AGPS transport security ................................................................................... 375 17.7 AT+CGPSAUTO 17.8 AT+CGPSNMEA Configure NMEA sentence type ........................................................................ 376 17.9 AT+CGPSNEMARATE Start GPS automatic ........................................................................................... 375 E Set NMEA output rate ........................................................................... 377 Configure AGPS MO method ................................................................................. 378 17.11 AT+CGPSFTM Start GPS test mode .............................................................................................. 379 FI L 17.10 AT+CGPSMD 17.12 AT+CGPSDEL Delete the GPS information ................................................................................... 380 17.13 AT+ CGPSXE Enable/Disable GPS XTRA function ...................................................................... 381 17.14 AT+CGPSXD Download XTRA assistant file ................................................................................ 381 Download XTRA assistant file automatically............................................... 382 17.16 AT+CGPSINFOCFG Report GPS NMEA-0183 sentence .............................................................. 383 AL 17.15 AT+CGPSXDAUTO Configure positioning mode ................................................................................. 385 17.18 AT+CGPSMSB Configure based mode switch to standalone ......................................................... 386 17.19 AT+CGPSHOR Configure positioning desired accuracy ................................................................ 387 EN TI 17.17 AT+CGPSPMD 17.20 AT+CGPSNOTIFY LCS respond positioning request .................................................................... 388 17.21 AT+CGPSMODE Enable/Disable BEIDOU session.................................................................................. 389 17.23 AT+CGNSSINFO D 17.22 AT+CBDS Configure GPS and GLONASS mode ............................................................... 388 Get GNSS fixed position information ............................................................... 390 Base station location...................................................................................................... 392 Base station location configure .............................................................................. 395 17.27 AT+CASSISTLOC 18 N 17.26 AT+CLBSCFG Base station location of LTE/CDMA1x mode ................................................. 397 O 17.25 AT+CLBS FI 17.24 Unsolicited XTRA download Codes .................................................................................................. 392 Audio Application Commands ................................................................................................. 399 AT+CREC 18.2 AT+CCMXPLAYWAV Play wav audio file .................................................................................. 400 18.3 AT+CCMXSTOPWAV Stop playing wav audio file ..................................................................... 401 18.4 AT+ CCMXPLAY Play audio file ................................................................................................... 401 18.5 AT+ CCMXSTOP Stop playing audio file ...................................................................................... 402 M Appendixes .............................................................................................................................. 403 O 19 record wav audio file .................................................................................................. 399 C 18.1 Verbose code and numeric code ......................................................................................................... 403 19.2 Response string of AT+CEER ............................................................................................................ 403 19.3 Summary of CME ERROR codes ...................................................................................................... 407 M C 19.1 Summary of CMS ERROR codes ...................................................................................................... 410 SI 19.4 SIM7500_SIM7600 Series_AT Command Manual_V1.07 16 2017-12-25 1 E Scope AL The present document describes the AT Command Set for the SIMCom Module: SIM7500 series, SIM7600 series. FI L 1.1 Introduction TI More information about the SIMCom Module which includes the Software Version information can be retrieved by the command ATI. In this document, a short description, the syntax, the possible setting values and responses, and some examples of AT commands are presented. EN Prior to using the Module, please read this document and the Version History to know the difference from the previous document. References O 1.2 N FI D In order to implement communication successfully between Customer Application and the Module, it is recommended to use the AT commands in this document, but not to use some commands which are not included in this document. C The present document is based on the following standards: M C O M [1] ETSI GSM 01.04: Abbreviations and acronyms. [2] 3GPP TS 27.005: Use of Data Terminal Equipment – Data Circuit terminating Equipment (DTE – DCE) interface for Short Message Service (SMS) and Cell Broadcast Service (CBS). [3] 3GPP TS 27.007: AT command set for User Equipment (UE). [4] WAP-224-WTP-20010710-a [5] WAP-230-WSP-20010705-a [6] WAP-209-MMSEncapsulation-20010601-a Terms and abbreviations SI 1.3 For the purposes of the present document, the following abbreviations apply: AT ATtention; the two-character abbreviation is used to start a command line to be sent from TE/DTE to TA/DCE DCE Data Communication Equipment; Data Circuit terminating Equipment DCS Digital Cellular Network DTE Data Terminal Equipment FI L AL O M C O N FI D EN TI Dual Tone Multi–Frequency Enhanced Data GSM Environment Enhanced General Packet Radio Service General–Purpose Input/Output General Packet Radio Service Global System for Mobile communications High Speed Downlink Packet Access High Speed Uplink Packet Access Inter–Integrated Circuit International Mobile station Equipment Identity International Mobile Subscriber Identity Mobile Equipment Mobile–Originated Mobile Station Mobile–Terminated; Mobile Termination Personal Communication System Protocol Data Unit Personal Identification Number Personal Unlock Key Subscriber Identity Module Short Message Service Short Message Service – Service Center Terminal Adaptor; e.g. a data card (equal to DCE) Terminal Equipment; e.g. a computer (equal to DTE) User Equipment Universal Mobile Telecommunications System Universal Subscriber Identity Module Wideband Code Division Multiple Access File Transfer Protocol Hyper Text Transfer Protocol Real Time Clock Unsolicited Result Code Definitions and conventions M 1.4 DTMF EDGE EGPRS GPIO GPRS GSM HSDPA HSUPA I2C IMEI IMSI ME MO MS MT PCS PDU PIN PUK SIM SMS SMS–SC TA TE UE UMTS USIM WCDMA FTP HTTP RTC URC C E Smart Machine Smart Decision SI 1. For the purposes of the present document, the following syntactical definitions apply: Carriage return character. Linefeed character. <…> Name enclosed in angle brackets is a syntactical element. Brackets themselves do not appear in the command line. […] Optional subparameter of AT command or an optional part of TA information response is enclosed in square brackets. Brackets themselves do not appear in the command line. SIM7500_SIM7600 Series_AT Command Manual_V1.07 18 2017-12-25 Smart Machine Smart Decision If subparameter is not given, its value equals to its previous value or the recommended default value. Underlined defined subparameter value is the recommended default setting or factory setting. underline 2. Document conventions: E Display the examples of AT commands with Italic format. Not display blank-line between command line and responses or inside the responses. Generally, the characters and are intentionally omitted throughout this document. If command response is ERROR, not list the ERROR response inside command syntax. FI L ♦ ♦ ♦ ♦ AL NOTE: AT commands and responses in figures may be not following above conventions. 3. Special marks for commands or parameters: – Is the command PIN protected? YES – TI SIM PIN AT command can be used only when SIM PIN is READY. – AT command can be used when SIM card is absent or SIM PIN validation is pending. References – Where is the derivation of command? EN NO – 3GPP Technical Specification 127 007. V.25ter – ITU–T Recommendation V.25ter. Vendor – This command is supported by SIMCom. SI M C O M C O N FI D 3GPP TS 27.007 SIM7500_SIM7600 Series_AT Command Manual_V1.07 19 2017-12-25 Smart Machine Smart Decision 2 E Interface settings FI L 2.1 AT Interface Synopsis Between Customer Application and the Module, standardized RS–232 interface is used for the communication, and default values for the interface settings as following: AT command syntax TI 2.2 AL 115200bps, 8 bit data, no parity, 1 bit stop, no data stream control. EN The prefix “AT” or “at” (no case sensitive) must be included at the beginning of each command line (except A/ and +++), and the character is used to finish a command line so as to issue the command line to the Module. It is recommended that a command line only includes a command. N FI D When Customer Application issues a series of AT commands on separate command lines, leave a pause between the preceding and the following command until information responses or result codes are retrieved by Customer Application, for example, “OK” is appeared. This advice avoids too many AT commands are issued at a time without waiting for a response for each command. C 1. Basic Command O In the present document, AT commands are divided into three categories: Basic Command, S Parameter Command, and Extended Command. O M The format of Basic Command is “AT ” or “AT& ”, “ ” is the command name, and “ ” is/are the parameter(s) for the basic command, and optional. An example of Basic Command is “ATE ”, which informs the TA/DCE whether received characters should be echoed back to the TE/DTE according to the value of “ ”; “ ” is optional and a default value will be used if omitted. C 2. S Parameter Command SI M The format of S Parameter Command is “ATS = ”, “ ” is the index of the S–register to set, and “ ” is the value to assign to it. “ ” is optional; in this case, the format is “ATS ”, and then a default value is assigned. 3. Extended Command The Extended Command has several formats, as following table list: SIM7500_SIM7600 Series_AT Command Manual_V1.07 20 2017-12-25 Smart Machine Smart Decision Table 2-1: Types of Extended Command Syntax Comments Test Command AT+ =? Test the existence of the command; give some information about the command subparameters. Read Command AT+ ? Check the current values of subparameters. Write Command AT+ =<…> Set user-definable subparameter values. Execution Command AT+ Read non-variable subparameters determined by internal processes. FI L E Command Type Information responses TI 2.3 AL NOTE: The character “+” between the prefix “AT” and command name may be replaced by other character. For example, using “#” or “$”instead of “+”. EN If the commands included in the command line are supported by the Module and the subparameters are correct if presented, some information responses will be retrieved by from the Module. Otherwise, the Module will report “ERROR” or “+CME ERROR” or “+CMS ERROR” to Customer Application. SI M C O M C O N FI D Information responses start and end with , i.e. the format of information responses is “ ”. Inside information responses, there may be one or more . Throughout this document, only the responses are presented, and are intentionally omitted. SIM7500_SIM7600 Series_AT Command Manual_V1.07 21 2017-12-25 Smart Machine Smart Decision A/ Repeat last command E 3.1 AT Commands According V.25TER FI L 3 Description V.25ter EN NO References TI SIM PIN AL This command is used for implement previous AT command repeatedly (except A/), and the return value depends on the last AT command. If A/ is issued to the Module firstly after power on, the response “OK” is only returned. Syntax Responses The response the last AT command return Examples M C O AT+GCAP +GCAP:+CGSM,+FCLASS,+DS OK A/ +GCAP:+CGSM,+FCLASS,+DS OK N FI D Execution Command A/ Dial command C O 3.2 ATD Description SI M This command is used to list characters that may be used in a dialling string for making a call or controlling supplementary services. NOTE: 1. Support several “P” or “p” in the DTMF string but the valid auto-sending DTMF after characters “P” or “p” should not be more than 29. 2. Auto-sending DTMF after character “P” or “p” should be ASCII character in the set 0-9, *, #. SIM PIN NO References V25.ter SIM7500_SIM7600 Series_AT Command Manual_V1.07 22 2017-12-25 Smart Machine Smart Decision Syntax Responses Originate a voice call successfully: OK VOICE CALL: BEGIN E Execution Commands ATD [ ][;] FI L Originate a data call successfully: CONNECT [ ] Originate a call unsuccessfully during command execution: ERROR AL Originate a call unsuccessfully for failed connection recovery: NO CARRIER EN TI Originate a call unsuccessfully for error related to the MT: +CME ERROR: Defined values SI M C O M C O N FI D String of dialing digits and optionally V.25ter modifiers dialing digits: 0 1 2 3 4 5 6 7 8 9 * # + A B C Following V.25ter modifiers are ignored: , T P ! W @ String of GSM modifiers: I Activates CLIR (disables presentation of own phone number to called party) i Deactivates CLIR (enables presentation of own phone number to called party) G Activate Closed User Group explicit invocation for this call only g Deactivate Closed User Group explicit invocation for this call only <;> The termination character ";" is mandatory to set up voice calls. It must not be used for data and fax calls. CONNECT result code string; the string formats please refer ATX/AT\V/AT&E command. Service failure result code string; the string formats please refer +CME ERROR result code and AT+CMEE command. Examples ATD10086; OK VOICE CALL:BEGIN SIM7500_SIM7600 Series_AT Command Manual_V1.07 23 2017-12-25 Smart Machine Smart Decision 3.3 ATD> Originate call from specified memory Description This command is used to originate a call using specified memory and index number. V.25ter FI L NO References E SIM PIN Responses Originate a voice call successfully: OK VOICE CALL: BEGIN TI Execution Commands ATD> [;] AL Syntax EN Originate a data call successfully: CONNECT [ ] D Originate a call unsuccessfully during command execution: ERROR FI Originate a call unsuccessfully for failed connection recovery: NO CARRIER C Defined values O N Originate a call unsuccessfully for error related to the MT: +CME ERROR: SI M C O M Phonebook storage: (For detailed description of storages see AT+CPBS) "DC" ME dialed calls list "MC" ME missed (unanswered received) calls list "RC" ME received calls list "SM" SIM phonebook "ME" UE phonebook "FD" SIM fixed dialing phonebook "ON" MSISDN list "LD" Last number dialed phonebook "EN" Emergency numbers Integer type memory location in the range of locations available in the selected memory, i.e. the index returned by AT+CPBR. <;> The termination character ";" is mandatory to set up voice calls. It must not be used for data and fax calls. SIM7500_SIM7600 Series_AT Command Manual_V1.07 24 2017-12-25 Smart Machine Smart Decision E CONNECT result code string; the string formats please refer ATX/AT\V/AT&E command. Service failure result code string; the string formats please refer +CME ERROR result code and AT+CMEE command. FI L Examples ATD> Originate call from active memory (1) Description SIM PIN References V.25ter D NO EN This command is used to originate a call to specified number. TI 3.4 AL ATD>SM3; OK VOICE CALL: BEGIN FI Syntax Responses Originate a voice call successfully: OK VOICE CALL: BEGIN C O N Execution Commands ATD> [;] Originate a call unsuccessfully during command execution: ERROR Originate a call unsuccessfully for failed connection recovery: NO CARRIER Originate a call unsuccessfully for error related to the MT: +CME ERROR: SI M C O M Originate a data call successfully: CONNECT [ ] Defined values Integer type memory location in the range of locations available in the selected memory, i.e. the index number returned by AT+CPBR. <;> The termination character ";" is mandatory to set up voice calls. It must not be used for data and fax SIM7500_SIM7600 Series_AT Command Manual_V1.07 25 2017-12-25 Smart Machine Smart Decision E calls. CONNECT result code string; the string formats please refer ATX/AT\V/AT&E command. Service failure result code string; the string formats please refer +CME ERROR result code and AT+CMEE command. FI L Examples ATD> Originate call from active memory (2) TI 3.5 AL ATD>2; OK VOICE CALL: BEGIN EN Description This command is used to originate a call to specified number. V.25ter FI NO References D SIM PIN N Syntax Responses Originate a voice call successfully: OK VOICE CALL: BEGIN SI M C O M C O Execution Commands ATD> [;] Originate a data call successfully: CONNECT [ ] Originate a call unsuccessfully during command execution: ERROR Originate a call unsuccessfully for failed connection recovery: NO CARRIER Originate a call unsuccessfully for error related to the MT: +CME ERROR: Defined values String type value, which should equal to an alphanumeric field in at least one phone book entry in the searched memories. formatted as current TE character set specified by AT+CSCS. must be double quoted. SIM7500_SIM7600 Series_AT Command Manual_V1.07 26 2017-12-25 Smart Machine Smart Decision FI L E <;> The termination character ";" is mandatory to set up voice calls. It must not be used for data and fax calls. CONNECT result code string; the string formats please refer ATX/AT\V/AT&E command. Service failure result code string; the string formats please refer +CME ERROR result code and AT+CMEE command. Examples TI ATA Call answer EN 3.6 AL ATD>”Kobe”; OK VOICE CALL: BEGIN Description SIM PIN References V.25ter N YES FI D This command is used to make remote station to go off-hook, e.g. answer an incoming call. If there is no an incoming call and entering this command to TA, it will be return “NO CARRIER” to TA. Responses For voice call: OK VOICE CALL: BEGIN C M C O M Execution Commands ATA O Syntax For data call, and TA switches to data mode: CONNECT No connection or no incoming call: NO CARRIER SI Examples ATA VOICE CALL: BEGIN OK SIM7500_SIM7600 Series_AT Command Manual_V1.07 27 2017-12-25 Smart Machine Smart Decision 3.7 ATH Disconnect existing call Description SIM PIN References V.25ter AL NO FI L E This command is used to disconnect existing call. Before using ATH command to hang up a voice call, it must set AT+CVHU=0. Otherwise, ATH command will be ignored and “OK” response is given only. This command is also used to disconnect PS data call, and in this case it doesn’t depend on the value of AT+CVHU. Responses If AT+CVHU=0: VOICE CALL: END: