SSP Tools Task Resulter User Guide
SSP_Tools_TaskResulter_UserGuide
User Manual:
Open the PDF directly: View PDF 
.
Page Count: 5
SSP Tools: Task Resulter
User Guide
Task Resulter User Guide Page 2 of 5
Document Revision History
Revision Date
Written/Edited By
Comments
June 2017
Paul Wheeler
Initial release with SSD v4.
December 2017
Paul Wheeler
Minor updates for SSD v5.
© Copyright 2017 SailPoint Technologies, Inc., All Rights Reserved.
SailPoint Technologies, Inc. makes no warranty of any kind with regard to this manual, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose. SailPoint Technologies shall not be liable for errors
contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing,
performance, or use of this material.
Restricted Rights Legend. All rights are reserved. No part of this document may be photocopied, reproduced, or translated to
another language without the prior written consent of SailPoint Technologies. The information contained in this document is
subject to change without notice.
Use, duplication or disclosure by the U.S. Government is subject to restrictions as set forth in subparagraph (c) (1) (ii) of the
Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 for DOD agencies, and subparagraphs (c)
(1) and (c) (2) of the Commercial Computer Software Restricted Rights clause at FAR 52.227-19 for other agencies.
Regulatory/Export Compliance. The export and reexport of this software is controlled for export purposes by the U.S.
Government. By accepting this software and/or documentation, licensee agrees to comply with all U.S. and foreign export laws
and regulations as they relate to software and related documentation. Licensee will not export or reexport outside the United
States software or documentation, whether directly or indirectly, to any Prohibited Party and will not cause, approve or
otherwise intentionally facilitate others in so doing. A Prohibited Party includes: a party in a U.S. embargoed country or country
the United States has named as a supporter of international terrorism; a party involved in proliferation; a party identified by the
U.S. Government as a Denied Party; a party named on the U.S. Government's Entities List; a party prohibited from
participation in export or reexport transactions by a U.S. Government General Order; a party listed by the U.S. Government's
Office of Foreign Assets Control as ineligible to participate in transactions subject to U.S. jurisdiction; or any party that licensee
knows or has reason to know has violated or plans to violate U.S. or foreign export laws or regulations. Licensee shall ensure
that each of its software users complies with U.S. and foreign export laws and regulations as they relate to software and
related documentation.
Trademark Notices. Copyright © 2017 SailPoint Technologies, Inc. All rights reserved. SailPoint, the SailPoint logo, SailPoint
IdentityIQ, and SailPoint Identity Analyzer are trademarks of SailPoint Technologies, Inc. and may not be used without the
prior express written permission of SailPoint Technologies, Inc. All other trademarks shown herein are owned by the
respective companies or persons indicated.
Task Resulter User Guide Page 3 of 5
Table of Contents
Introduction ........................................................................................................................................ 4
Installation .......................................................................................................................................... 4
How to Use Task Resulter .................................................................................................................. 4
Limitations .......................................................................................................................................... 5
Task Resulter User Guide Page 4 of 5
Introduction
The Task Resulter provides a simple screen to view the results of account aggregation tasks, including
information unavailable in the main Task Results page, such as speed (in records per second). It is
useful for measuring performance of your account aggregations.
Installation
The Task Resulter ships with the SSD as an IdentityIQ Plugin but is not deployed by default as part of
the build. Deployment can be switched on or off by use of the “deployTaskResulter” property in the
build.properties file. Set this to “true” to enable deployment, or “false” to disable. Alternatively, the SSD
Deployer tool can be used to enable or disable deployment (see the SSD Deployer User Guide). The
plugin may also be installed manually using the Plugins option under the Gear menu. The plugin can
be found in the SSD file structure in this location:
ssdplugins/TaskResulter/TaskResulter.1.1.zip
The plugin will only work alongside the IdentityIQ Plugin Framework that comes with IdentityIQ 7.1 and
above.
How to Use Task Resulter
In order to use the Task Resulter a user must have the “TaskResulterAccess” Capability in IdentityIQ,
which is imported during plugin installation, or the SystemAdministrator capability. This provides a
QuickLink Category labelled “Administration” in the UI, and a QuickLink under this called “Task
Resulter”.
On clicking the QuickLink the user will be presented with a screen with two dropdowns; one provides a
list of applications and the other a list of account aggregation task results for that application.
The user selects an application and chooses a corresponding aggregation task. An “Invoke calculation”
button is presented, and on clicking this the details of the task result can be viewed.
Task Resulter User Guide Page 5 of 5
The statistics available are:
• Task result name
• Status (Success/Fail)
• Time the task started
• Time the task finished
• Duration of the task
• Total records
• Updated accounts
• Optimized accounts
• Ignored accounts
• Speed in records per second
Limitations
The Task Resulter can only be used on IdentityIQ version 7.1 and above.
