CSiXRevit Manual S TN IFC 001
User Manual: S-TN-IFC-001
Open the PDF directly: View PDF 
.
Page Count: 27
| Download | |
| Open PDF In Browser | View PDF |
©COMPUTERS AND STRUCTURES, INC., OCTOBER 2013 TECHNICAL NOTE IFC4 IMPORT AND EXPORT Introduction This document describes the import and export of Industry Foundation Classes IFC 4 files to and from ETABS 2013.1.2 or later and SAP2000 16.0.2 or later. Files written in IFC2x3, the previous release of IFC, can also be imported and exported but this older functionality is not described here. IFC files are repositories of Building Information Modeling BIM data. Most of this data is not relevant to structural analysis and accordingly not imported by ETABS or SAP2000. Various types of IFC data are organized into subsets named “views” which gather data types relevant to various aspects of building design, construction, and maintenance. There are several such views, but only two views are relevant to ETABS and SAP2000: the “structural analysis view”, and the “architectural coordination view”. The structural analysis view describes a building structure in terms of nodes, elements, and loads. Files containing a structural analysis view are the most suitable for import into ETABS and SAP2000, but are written by very few if any 3D building modeling programs. Such files are suitable for export to other structural software, such as steel and concrete detailing applications. The architectural coordination view describes the components of a building in architectural terms. Files containing an architectural coordination view are quite prevalent. Only some of the entities in these files are relevant to ETABS or SAP2000, and whether these entities can be imported or not depends on how their geometry is described. For example, if the external faces of a beam or column are specified in the IFC file but its centerline is not, the beam or column cannot be imported. Furthermore, because the geometric extents of framing elements stop at the external faces of their supports, the user needs to systematically adjust end points after import. Architectural coordination view files are suitable for export to most building design software as they are generally well imported. Whether it is a structural analysis view or architectural coordination view file, an IFC file contains, in addition to top level entities from these views, entities from shared supporting IFC schemas which complete the description of the top level entities and establish relationships between them. This document includes seven sections: 1. Account of which structural analysis view entities can be imported. 2. Account of which architectural coordination view entities can be imported. 3. Account of which shared supporting schemas entities can be imported. 4. Procedure for importing an IFC file into ETABS or SAP2000. 5. Accounts of which ETABS and SAP2000 model components can be exported to a structural analysis view file. 6. Accounts of which ETABS and SAP2000 model components can be exported to an architectural view coordination file. 7. Describes the procedure for exporting an IFC file from ETABS or SAP2000. IFC4 Import and Export Page 1 of 27 Technical Note IFC4 Import and Export Structural Analysis View Import Structural Analysis Domain Entities The table below indicates for each of the IFC entity types in the Structural Analysis domain whether it is imported into ETABS and SAP2000, and if it is imported, notes any restrictions: IFC Entity IfcRelConnectsStructuralActivity IfcRelConnectsStructuralMember IfcRelConnectsWithEccentricity Imported Restrictions Imported for ETABS frame objects and SAP2000 line objects IfcStructuralAnalysisModel IfcStructuralCurveAction IfcStructuralCurveConnection IfcStructuralCurveMember IfcStructuralCurveMemberVarying Imported if connected to a structural item. Per the IFC 4 Specification, a curve member whose variation of profile properties can be sufficiently described by a start profile and an end profile (e.g. tapers) shall be modeled as a single direct instance of the supertype IfcStructuralCurveMember. IfcStructuralCurveReaction IfcStructuralLinearAction IfcStructuralLoadCase IfcStructuralLoadGroup IfcStructuralPlanarAction IfcStructuralPointAction Imported if connected to a structural item. Imported if connected to a structural item. Temperature loads not imported for point objects and shell objects, displacement loads not imported for frame objects and shell objects IfcStructuralPointConnection IfcStructuralPointReaction IfcStructuralResultGroup IfcStructuralSurfaceAction IfcStructuralSurfaceConnection IfcStructuralSurfaceMember IfcStructuralSurfaceMemberVarying IfcStructuralSurfaceReaction IFC4 Import and Export Page 2 of 27 Technical Note IFC4 Import and Export Structural Load Resource Entities The table below indicates for each of the IFC entity types in the Structural Load Resource schema whether it is imported into ETABS and SAP2000, and if it is imported, notes any restrictions: IFC Entity IfcBoundaryEdgeCondition IfcBoundaryFaceCondition IfcBoundaryNodeCondition IfcBoundaryNodeConditionWarping IfcFailureConnectionCondition IfcSlippageConnectionCondition IfcStructuralLoadConfiguration IfcStructuralLoadLinearForce IfcStructuralLoadPlanarForce IfcStructuralLoadSingleDisplacement IfcStructuralLoadSingleDisplacementDist ortion Imported Restrictions Imported for point objects IfcStructuralLoadSingleForce IfcStructuralLoadSingleForceWarping IfcStructuralLoadTemperature IfcSurfaceReinforcementArea IFC4 Import and Export Imported for frame objects Page 3 of 27 Technical Note IFC4 Import and Export Architectural Coordination View Import Shared Building Element Entities The table below indicates for each of the IFC entity types in the Shared Building Element schema whether it is imported into ETABS and SAP2000, and if it is imported, notes any restrictions: IFC Entity IfcBeam Imported Restrictions Imported if it has a ‘Body’ shape representation with a 'SweptSolid' representation type and an IfcSweptAreaSolid; or if it has an ‘Axis’ shape with a ‘Curve3D’ representation type and an IfcBoundedCurve. The end points typically require adjustment by the user as they are at the face of the support – wall, column, or girder. Always imported as a straight line. IfcBeamStandardCase IfcBeamType IfcBuildingElementProxy IfcBuildingElementProxyType IfcBuildingSystem IfcChimney IfcChimneyType IfcColumn Imported if it has a ‘Body’ shape representation with a 'SweptSolid' representation type and an IfcSweptAreaSolid; or if it has an ‘Axis’ shape with a ‘Curve3D’ representation type and an IfcBoundedCurve. Always imported as a straight line. IfcColumnStandardCase IfcColumnType IfcCovering IfcCoveringType IfcCurtainWall IfcCurtainWallType IfcDoor IfcDoorStandardCase IfcDoorType IfcMember Imported if it has a ‘Body’ shape representation with a 'SweptSolid' representation type and an IfcSweptAreaSolid; or if it has an ‘Axis’ shape with a ‘Curve3D’ representation type and an IfcBoundedCurve. The end points typically require adjustment by the user as they are at the face of the support – wall, column, or girder. Always imported as a straight line. IfcMemberStandardCase IfcMemberType IfcPlate IFC4 Import and Export Page 4 of 27 Technical Note IFC4 Import and Export IfcPlateStandardCase IfcPlateType IfcRailing IfcRailingType IfcRamp IfcRampFlight IfcRampFlightType IfcRampType IfcRelConnectsPathElements IfcRelCoversBldgElements IfcRelCoversSpaces IfcRoof IfcRoofType IfcShadingDevice IfcShadingDeviceType IfcSlab Imported if it has a ‘Body’ shape representation with a 'SweptSolid' representation type and an IfcSweptAreaSolid; or if it has an ‘Axis’ shape with a ‘Curve3D’ representation type and an IfcBoundedCurve. Always imported as a straight line IfcSlabElementedCase IfcSlabStandardCase IfcSlabType IfcStair IfcStairFlight IfcStairFlightType IfcStairType IfcWall IfcWallElementedCase IfcWallStandardCase IfcWallType IfcWindow IfcWindowStandardCase IfcWindowType IFC4 Import and Export Page 5 of 27 Technical Note IFC4 Import and Export Shared Schema Entity Import Core Data Entities The table below indicates for each of the IFC entity types in the Core Data schema whether it is imported into ETABS and SAP2000, and if it is imported, notes any restrictions: IFC Entity Imported IfcActor IfcGroup Restrictions Derived IfcStructuralLoadGroup entities imported IfcProject IfcPropertySet IfcProxy IfcRelAssignsToGroup IfcRelAssignsToGroupByFactor IfcRelAssignsToProduct IfcRelDefinesByType IfcTypeObject IfcTypeProduct Geometric Constraint Resource Entities The table below indicates for each of the IFC entity types in the Geometry Constraint Resource schema whether it is imported into ETABS and SAP2000, and if it is imported, notes any restrictions: IFC Entity IfcConnectionCurveGeometry IfcConnectionPointEccentricity IfcConnectionPointGeometry IfcConnectionSurfaceGeometry Imported Restrictions IfcConnectionVolumeGeometry IfcGridAxis IfcGridPlacement IfcLocalPlacement IfcVirtualGridIntersection IFC4 Import and Export Page 6 of 27 Technical Note IFC4 Import and Export Geometric Model Resource Entities The table below indicates for each of the IFC entity types in the Geometry Model Resource schema whether it is imported into ETABS and SAP2000, and if it is imported, notes any restrictions: IFC Entity IfcAdvancedBrep IfcAdvancedBrepWithVoids IfcBlock IfcBooleanClippingResult IfcBooleanResult IfcBoundingBox Imported Restrictions IfcBoxedHalfSpace IfcCartesianPointList3D IfcCsgSolid IfcExtrudedAreaSolid IfcExtrudedAreaSolidTapered IfcFaceBasedSurfaceModel IfcFacetedBrep IfcFacetedBrepWithVoids IfcFixedReferenceSweptAreaSolid IfcHalfSpaceSolid IfcManifoldSolidBrep IfcPolygonalBoundedHalfSpace IfcRectangularPyramid IfcRevolvedAreaSolid IfcRevolvedAreaSolidTapered IfcRightCircularCone IfcRightCircularCylinder IfcShellBasedSurfaceModel IfcSphere IfcSurfaceCurveSweptAreaSolid IfcSweptAreaSolid IfcSweptDiskSolid IfcSweptDiskSolidPolygonal IfcTriangulatedFaceSet IFC4 Import and Export Page 7 of 27 Technical Note IFC4 Import and Export Geometry Resource Entities The table below indicates for each of the IFC entity types in the Geometry Resource schema whether it is imported into ETABS and SAP2000, and if it is imported, notes any restrictions: IFC Entity IfcAxis1Placement IfcAxis2Placement2D IfcAxis2Placement3D IfcBoundaryCurve IfcBSplineCurveWithKnots IfcBSplineSurfaceWithKnots IfcCartesianPoint IfcCartesianTransformationOperator 2D IfcCartesianTransformationOperator 2DnonUniform Imported Restrictions Imported as IfcCartesianTransformationOperator2D IfcCartesianTransformationOperator 3D IfcCartesianTransformationOperator 3DnonUniform Imported as IfcCartesianTransformationOperator3D IfcCircle IfcCompositeCurve IfcCompositeCurveOnSurface IfcCompositeCurveSegment IfcCurveBoundedPlane IfcCurveBoundedSurface IfcCylindricalSurface IfcDirection IfcEllipse IfcLine IfcMappedItem IfcOffsetCurve2D IfcOffsetCurve3D IfcOuterBoundaryCurve IfcPcurve Imported only if BasisCurve is linear or circular Imported only if BasisCurve is linear or circular IfcPlane IfcPoint IfcPointOnCurve IfcPointOnSurface IfcPolyline IfcRationalBSplineCurveWithKnots IfcRationalBSplineSurfaceWithKnots IfcRectangularTrimmedSurface IFC4 Import and Export Page 8 of 27 Technical Note IFC4 Import and Export IfcReparametrisedCompositeCurve Segment IfcRepresentationMap IfcSurfaceOfLinearExtrusion IfcSurfaceOfRevolution IfcTrimmedCurve IfcVector Material Resource Entities The table below indicates for each of the IFC entity types in the Material Resource schema whether it is imported into ETABS and SAP2000, and if it is imported, notes any restrictions: IFC Entity Imported Restrictions IfcMaterial IfcMaterialConstituent IfcMaterialConstituentSet IfcMaterialLayer IfcMaterialLayerSet IfcMaterialLayerSetUsage IfcMaterialLayerWithOffsets IfcMaterialProfile IfcMaterialProfileSet IfcMaterialProfileSetUsage IfcMaterialProfileSetUsageTapering IfcMaterialProfileWithOffsets IfcMaterialProperties IFC4 Import and Export Only the three following property sets are imported: common, mechanical, concrete, and steel. Page 9 of 27 Technical Note IFC4 Import and Export Measurement Resource Entities The table below indicates for each of the IFC entity types in the Measurement Resource schema whether it is imported into ETABS and SAP2000, and if it is imported, notes any restrictions: IFC Entity IfcContextDependentUnit IfcConversionBasedUnit IfcConversionBasedUnitWithOffset IfcDerivedUnit IfcDerivedUnitElement IfcDimensionalExponents Imported Restrictions IfcMeasureWithUnit IfcMonetaryUnit IfcNamedUnit IfcSIUnit IfcUnitAssignment Product Extension Entities The table below indicates for each of the IFC entity types in the Product Extension schema whether it is imported into ETABS and SAP2000, and if it is imported, notes any restrictions: IFC Entity IfcBuilding IfcBuildingStorey IfcGrid Imported Restrictions Imported in ETABS only IfcOpeningElement IfcOpeningStandardCase IfcRelAssociatesMaterial IfcRelConnectsElements IfcRelContainedInSpatialStructure IfcSite IFC4 Import and Export Page 10 of 27 Technical Note IFC4 Import and Export Profile Resource Entities The table below indicates for each of the IFC entity types in the Profile Resource schema whether it is imported into ETABS and SAP2000, and if is imported, notes any restrictions: IFC Entity IfcArbitraryClosedProfileDef IfcArbitraryOpenProfileDef IfcArbitraryProfileDefWithVoids IfcAsymmetricIShapeProfileDef IfcCenterLineProfileDef IfcCircleHollowProfileDef IfcCircleProfileDef IfcCompositeProfileDef Imported Restrictions Impoorted if the ProfileName attribute matches a section name in the .PRO or .XML catalog file specified when the file is imported Only double angle and double channel profiles are imported IfcCShapeProfileDef IfcEllipseProfileDef IfcIShapeProfileDef IfcLShapeProfileDef IfcMirroredProfileDef IfcProfileProperties IfcRectangleHollowProfileDef IfcRectangleProfileDef IfcReinforcementBarProperties IfcRoundedRectangleProfileDef IfcSectionProperties IfcSectionReinforcementProperties IfcTrapeziumProfileDef IfcTShapeProfileDef IfcUShapeProfileDef IfcZShapeProfileDef IFC4 Import and Export Page 11 of 27 Technical Note IFC4 Import and Export Property Resource Entities The table below indicates for each of the IFC entity types in the Property Resource schema whether it is imported into ETABS and SAP2000, and if it is imported, notes any restrictions: IFC Entity IfcComplexProperty IfcExtendedProperties IfcPreDefinedProperties IfcPropertyBoundedValue IfcPropertyListValue IfcPropertyReferenceValue Imported Restrictions IfcPropertySingleValue IfcPropertyTableValue Representation Resource Entities The table below indicates for each of the IFC entity types in the Representation Resource schema whether it is imported into ETABS and SAP2000, and if it is imported, notes any restrictions: IFC Entity IfcGeometricRepresentationContext Imported Restrictions IfcGeometricRepresentationSub Context IfcProductDefinitionShape IfcProductRepresentation IfcShapeAspect IfcShapeRepresentation IfcTopologyRepresentation IFC4 Import and Export Page 12 of 27 Technical Note IFC4 Import and Export Topology Resource Entities The table below indicates for each of the IFC entity types in the Representation Resource schema whether it is imported into ETABS and SAP2000, and if it is imported, notes any restrictions: IFC Entity IfcAdvancedFace IfcClosedShell IfcConnectedFaceSet IfcEdge IfcEdgeCurve IfcEdgeLoop Imported Restrictions IfcFace IfcFaceBound IfcFaceOuterBound IfcFaceSurface IfcOrientedEdge IfcPath IfcPolyLoop IfcSubEdge IfcVertex IfcVertexLoop IfcVertexPoint Derived IfcVertexPoint entities imported Utility Resource Entities The table below indicates for each of the IFC entity types in the Utility Resource schema whether it is imported into ETABS and SAP2000, and if it is imported, notes any restrictions: IFC Entity IfcApplication IfcOwnerHistory IFC4 Import and Export Imported Restrictions Page 13 of 27 Technical Note IFC4 Import and Export Import Procedure Importing into ETABS 2013 • From the start page of ETABS, choose Import >IFC File… under the File menu. The Import IFC File form is displayed: • Pick the Browse… button. The Open form is displyed. Navigate to the folder containing the IFC fie to import, and select it. ETABS parses the file, which may take a few seconds, and displays an account of its relevant content: IFC4 Import and Export Page 14 of 27 Technical Note IFC4 Import and Export • To select a section catalog other than AISC14.xml, pick the Browse button and select a different .xml file in the Open form. ETABS imports most IFC profiles that are subtypes of IfcParameterizedProfileDef, with a few exceptions such as IfcEllipseProfileDef. However, many 3D building modeling programs do not export section profiles this way, and instead export them as IfcArbitraryClosedProfileDef entities which are defined by their outlines. Such profile entities are not directly useable for analysis and design. However, if their ProfileName attribute matches one of the section names in the section catalog you selected, these profile entities are imported as the corresponding ETABS section. • Select the type of IFC entities to import. If the file includes both Structural Analysis view and Architectural Coodination view entities, you should choose one type or the other. If you import both, you may get duplicate members. • Pick the Import button. After a few moments, ETABS displays the imported model. If there are error or warnings, a message box will be displayed to that effect. You should then review the log file. Its name and folder location are the same as those of the .IFC file you imported, with the extension changed to .ifcimp.log Importing into SAP2000 The procedure is identical. The differences are you access the Import > IFC File in the File menu from a blank SAP2000 model instead of the ETABS start page, and you specify a sections catalog file with a .pro file extension instead of .xml. Reviewing the Log File (.ifcimp.log) A typical log file is listed below. It includes: IFC4 Import and Export Page 15 of 27 Technical Note • • • • IFC4 Import and Export The name of the imported file, its IFC version, the version of the importing program, the date and time Any relevant warning or error messages, if the file could not be imported. Each IFC entity is listed with its item number in the .IFC file, its name, and its coordinates if it has any A list of imported entities A list of entities not processed File “D:\Manuals\IFC\Model1.ifc” 2x3 imported in ETABS 2013 at 2013-06-27T11:35:10 IfcMaterial imported as No design in ETABS 2013 for the following items: 92 named STEEL/A992 245 named CONCRETE/3000 408 named A615-60 13292 named CONCRETE/1500 13350 named STEEL/A500-GR.B Imported entities: 3 of type IFCARBITRARYCLOSEDPROFILEDEF 3 of type IFCAXIS2PLACEMENT2D 160 of type IFCAXIS2PLACEMENT3D 15 of type IFCBEAM 6 of type IFCBEAMTYPE 1 of type IFCBUILDINGSTOREY 1192 of type IFCCARTESIANPOINT 1210 of type IFCCARTESIANTRANSFORMATIONOPERATOR3D 1 of type IFCCIRCLEPROFILEDEF 6 of type IFCCOLUMN 2 of type IFCCOLUMNTYPE 28 of type IFCDIRECTION 22 of type IFCEXTRUDEDAREASOLID 1 of type IFCGEOMETRICREPRESENTATIONCONTEXT 7 of type IFCISHAPEPROFILEDEF 144 of type IFCLOCALPLACEMENT 1 of type IFCLSHAPEPROFILEDEF 1210 of type IFCMAPPEDITEM 5 of type IFCMATERIAL 2 of type IFCMATERIALLAYER 2 of type IFCMATERIALLAYERSET 3 of type IFCMATERIALLAYERSETUSAGE 1 of type IFCOWNERHISTORY 5 of type IFCPOLYLINE 139 of type IFCPRODUCTDEFINITIONSHAPE 1 of type IFCPROJECT 4831 of type IFCPROPERTYSINGLEVALUE 2 of type IFCRECTANGLEPROFILEDEF 6 of type IFCRELASSOCIATESMATERIAL 1 of type IFCRELCONTAINEDINSPATIALSTRUCTURE 10 of type IFCRELDEFINESBYTYPE 1210 of type IFCREPRESENTATIONMAP 1351 of type IFCSHAPEREPRESENTATION 9 of type IFCSIUNIT 1 of type IFCSLAB 1 of type IFCSLABTYPE 38 of type IFCSTYLEDITEM 1 of type IFCUNITASSIGNMENT 2 of type IFCWALLSTANDARDCASE 1 of type IFCWALLTYPE Other entities: 1 of type IFCAPPLICATION IFC4 Import and Export Page 16 of 27 Technical Note IFC4 Import and Export 1 of type IFCBUILDING 22 of type IFCCLOSEDSHELL 10 of type IFCCOLOURRGB 2 of type IFCELEMENTASSEMBLY 20 of type IFCELEMENTQUANTITY 441 of type IFCFACE 441 of type IFCFACEOUTERBOUND 26 of type IFCFACETEDBREP 3 of type IFCGEOMETRICREPRESENTATIONSUBCONTEXT 10 of type IFCOPENINGELEMENT 1 of type IFCORGANIZATION 1 of type IFCPERSON 1 of type IFCPERSONANDORGANIZATION 441 of type IFCPOLYLOOP 1 of type IFCPOSTALADDRESS 5 of type IFCPRESENTATIONLAYERASSIGNMENT 13 of type IFCPRESENTATIONSTYLEASSIGNMENT 284 of type IFCPROPERTYSET 19 of type IFCQUANTITYAREA 20 of type IFCQUANTITYLENGTH 20 of type IFCQUANTITYVOLUME 20 of type IFCQUANTITYWEIGHT 105 of type IFCREINFORCINGBAR 5 of type IFCRELAGGREGATES 304 of type IFCRELDEFINESBYPROPERTIES 10 of type IFCRELVOIDSELEMENT 1 of type IFCSITE 13 of type IFCSURFACESTYLE 10 of type IFCSURFACESTYLERENDERING IFC4 Import and Export Page 17 of 27 Technical Note IFC4 Import and Export Structural Analysis View Export Export from ETABS The table below indicates for each of the ETABS model components whether it is exported to structural analysis view files, and if it is exported, the IFC entity written: Model Element Project Project Information Design Preferences Structure Layout Stories Grid Systems Properties Materials Frame Sections Insertion Point Slab Sections Deck Sections Wall Sections Reinforcing Bar Sizes Spring Properties Point Springs Line Springs Area Springs Diaphragms Hinge Properties Panel Zones Structural Objects Joint Objects Joint restraints Columns Beams IFC4 Import and Export Exported IFC Entity IfcProject IfcBuildingStorey IfcMaterial and IfcMaterialProperties. The mechanical properties of non-isotropic properties are not exported. Appropriate IfcParameterizedProfileDef subtype for basic profiles or IfcCompositeProfileDef in the case of double angle or double channels. Nonprismatic sections with two basic profiles of the same type at each end are exported as an IfcMaterialProfileSetUsageTapering; if the nonprismatic section has multiple segments, the internal sections are ignored and a single segment between the start and end section is assumed. Other sections are exported as an IfcProfileDef with an associated IfcProfileProperties describing the profile mechanical properties. IfcMaterialProfileSetUsage IfcStructuralSurfaceMember Exported as an IfcStructuralSurfaceMember with thickness equal to the concrete cover thickness IfcStructuralSurfaceMember IfcBoundaryCondition IfcStructuralConnection at object ends. Intermediate joints on frame objects are not exported, and frame objects supported at intermediate joints are not connected. IfcBoundaryCondition One IfcStructuralCurveMember per frame object Page 18 of 27 Technical Note Braces Other Frame Objects Restraints End Length Offsets Insertion Points Floors Walls Openings Other Shell Objects Link Objects Groups Loads Functions Load Patterns Selfweight Modal Cases Static Load Cases Load Combinations Shell Uniform Load Sets Joint Loads Ground Displacement Force Temperature Frame Loads Point Distributed Temperature Open Structure Wind Parameters Shell Loads Uniform Load Sets Uniform Temperature IFC4 Import and Export One IfcStructuralCurveMember per frame object IfcBoundaryCondition IfcRelConnectsWithEccentricity IfcStructuralSurfaceMember IfcStructuralSurfaceMember IfcStructuralLoadGroup. Seismic and Wind Auto-lateral load patterns not exported. IfcStructuralLoadCase IfcStructuralLoadGroup IfcStructuralPointAction IfcStructuralPointAction IfcStructuralCurveAction IfcStructuralPlanarAction Analysis Results Joint Displacement Support Reactions Frame Forces Shell Forces IFC4 Import and Export Page 19 of 27 Technical Note IFC4 Import and Export Export from SAP2000 The table below indicates for each of the possible SAP2000 model components whether it is exported to structural analysis view files, and if it is exported, the IFC entity written: Model Element Project Project Information Design Preferences Structure Layout Exported IFC Entity IfcProject IfcBuildingStorey created for each point object z elevation in the model Grid Systems Properties Materials Frame Sections Insertion Point Area Sections Restraints Spring Properties IfcMaterial and IfcMaterialProperties. The mechanical properties of non-isotropic properties are not exported. Appropriate IfcParameterizedProfileDef subtype for basic profiles or IfcCompositeProfileDef in the case of double angle or double channels. Other sections are exported as an IfcProfileDef with an associated IfcProfileProperties describing the profile mechanical properties. IfcMaterialProfileSetUsage IfcStructuralSurfaceMember IfcBoundaryCondition Point Springs Line Springs Area Springs Structural Objects IfcBoundaryCondition Joint Objects IfcStructuralConnection at object ends. Intermediate joints on frame objects are not connected to the supporting frame objects. Joint restraints and local axes Joint Constraints Frame Objects Restraints End Length Offsets Joint Offsets Cable Objects Tendon Objects Area Objects IfcBoundaryCondition One IfcStructuralCurveMember per frame object IfcBoundaryCondition IfcRelConnectsWithEccentricity IfcStructuralCurveMember IfcStructuralSurfaceMember Link Objects Solid Objects Groups Loads Functions IFC4 Import and Export Page 20 of 27 Technical Note Load Patterns Selfweight Modal Cases Static Load Cases Load Combinations Joint Loads Ground Displacement Force Temperature Frame Loads Gravity Point Distributed Temperature Strain Deformation Target Force Auto Wave Loading Parameters Open Structure Wind Parameters Shell Loads Gravity Uniform IFC4 Import and Export IfcStructuralLoadGroup. Seismic and Wind Auto-lateral load patterns not exported. IfcStructuralLoadCase IfcStructuralLoadGroup IfcStructuralPointAction IfcStructuralCurveAction IfcStructuralPointAction IfcStructuralCurveAction IfcStructuralPlanarAction Uniform to Frame Surface Pressure Temperature Strain Rotate Wind Pressure Solid Loads Analysis Results Joint Displacements Support Reactions Frame Forces Shell Forces Solid Forces IFC4 Import and Export Page 21 of 27 Technical Note IFC4 Import and Export Architectural Coordination View Export Export from ETABS The table below indicates for each of the possible ETABS model components whether it is exported to architectural coordination view files, and if it is exported, the IFC entity written: Model Element Exported IFC Entity Project Project Information IfcProject Structure Layout IfcBuildingStorey created for each point object z elevation in the model Grids Properties Materials IfcMaterial and IfcMaterialProperties. Frame Sections Appropriate IfcParameterizedProfileDef subtype for basic profiles or IfcCompositeProfileDef in the case of double angle or double channels. Nonprismatic sections with two basic profiles of the same type at each end are exported as an IfcMaterialProfileSetUsageTapering; if the nonprismatic section has multiple segments, the internal sections are ignored and a single segment between the start and end section is assumed. Insertion Point IfcMaterialProfileSetUsage Slab Sections IfcMaterialLayerSetUsage Deck Sections Wall Sections Structural Objects Joint Objects Columns Beams Braces Other Frame Objects End Length Offsets Joint Offsets Floors Walls Openings Other Shell Objects IFC4 Import and Export Exported as an IfcMaterialLayerSetUsage with thickness equal to the deck total thickness IfcMaterialLayerSetUsage Frame and shell object locations are exported after adjusting for end length offsets and section insertion point IfcColumnStandardCase or IfcColumn if the column has a nonprismatic section. Only exported if the section is a basic profile, a double angle, a double channel, or a nonprismatic section with two basic profiles of the same type at each end. IfcBeamStandardCase or IfcBeam if the beam has a nonprismatic section. Only exported if the section is a basic profile, a double angle, a double channel, or a nonprismatic section with two basic profiles of the same type at each end. IfcMemberStandardCase or IfcMember if the brace has a nonprismatic section. Only exported if the section is a basic profile, a double angle, a double channel, or a nonprismatic section with two basic profiles of the same type at each end. IfcSlabStandardCase Vertical walls exported as IfcWallStandardCase Page 22 of 27 Technical Note IFC4 Import and Export Groups Loads Any Load Data IFC4 Import and Export Page 23 of 27 Technical Note IFC4 Import and Export Export from SAP2000 The table below indicates for each of the possible SAP2000 model components whether it is exported to architectural coordination view files, and if it is exported, the IFC entity written: Model Element Project Project Information Structure Layout Stories Grids Properties Materials Frame Sections Insertion Point Area Sections Restraints Spring Properties Diaphragms Hinge Properties Panel Zones Structural Objects Joint Objects Vertical Frame Objects Horizontal Frame Objects Other Frame Objects End Length Offsets Joint Offsets Cable Objects Tendon Objects Vertical Area Objects Other Area Objects Solid Objects Other shell objects Groups IFC4 Import and Export Exported IFC Entity IfcProject IfcBuildingStorey created for each point object z elevation in the model IfcMaterial Appropriate IfcParameterizedProfileDef subtype IfcMaterialProfileSetUsage IfcMaterialLayerSetUsage IfcBoundaryCondition Locations exported for each frame or shell object after end length offsets and insertion point adjustments IfcColumnStandardCase or IfcColumn if the object has a nonprismatic section. Only exported if the profile is a basic profile or a double angle or double channel, or a nonprismatic section with two basic profiles of the same type at each end. IfcBeamStandardCase or IfcBeam if the object has a nonprismatic section. Only exported if the profile is a basic profile or a double angle or double channel, or a nonprismatic section with two basic profiles of the same type at each end. IfcMemberStandardCase or IfcMember if the object has a nonprismatic section. Only exported if the profile is a basic profile or a double angle or double channel, or a nonprismatic section with two basic profiles of the same type at each end. IfcWallStandardCase IfcSlabStandardCase Page 24 of 27 Technical Note IFC4 Import and Export Loads Any type of load data IFC4 Import and Export Page 25 of 27 Technical Note IFC4 Import and Export Export Procedure Exporting from ETABS 2013 • Open an ETABS model to export. • To export only selected objects from the model, make a selection. This option is helpful when a model has been previously exported to another application and you wish to update it. You can then export only those objects that need updating. • Choose Export >IFC File… under the File menu. The Create IFC File form is displayed: • To save the file under a different name or in a different folder location, click the Browse… button, and specify these in the Save As… form which is displayed. • Make relevant file format selections: IFC2x3 or IFC4, Architectural Coordination view or Structural view, and the length and force units. Force units only apply if you are writing a Structural view file. • Choose specific model contents to export by checking or unchecking the corresponding buttons and boxes. The button letting you choose between Entire Model and Model Selection is only active if there are selected objects. Loads can only be exported to a Structural View file. • Click OK. ETABS writes the file. If there are warnings, a message box will be displayed to that effect. You should review the log file. Its name and folder location are the same as those of the model you exported, with the extension changed to .ifcexp.log IFC4 Import and Export Page 26 of 27 Technical Note IFC4 Import and Export Exporting from SAP2000 The procedure is identical. The difference is you open a SAP2000 model instead of an ETABS model, and the model contents to export are of slightly different types: IFC4 Import and Export Page 27 of 27
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : Computers and Structures, Inc. Company : CSI Create Date : 2015:12:27 16:02:59-08:00 Modify Date : 2015:12:27 16:06:06-08:00 Source Modified : D:20150203032643 Language : EN-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2015:12:27 16:06:06-08:00 Creator Tool : Acrobat PDFMaker 11 for Word Document ID : uuid:eef35851-5565-4d8f-afa8-a9d1157cf0fb Instance ID : uuid:8a0d2e7f-4795-4e90-bfcd-466370b8c909 Subject : 25 Format : application/pdf Title : CSiXRevit Manual Creator : Computers and Structures, Inc. Producer : Adobe PDF Library 11.0 Page Layout : SinglePage Page Count : 27EXIF Metadata provided by EXIF.tools