R261 Samsung Chrono English User Manual

User Manual:

Open the PDF directly: View PDF PDF.
Page Count: 151 [warning: Documents this large are best viewed by clicking the View PDF Link!]

PORTABLE TRI-BAND
MOBILE PHONE
User Manual
Please read this manual before operating your
phone, and keep it for future reference.
CRT_SCH-R261_Coco2_English_UM_EE03_CB_052511_F3
Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to
the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to
Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited
to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation
and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you
agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or
otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All
applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA), LLC
©2011 Samsung Telecommunications America, LLC is a registered trademark of Samsung Electronics America, Inc. and its related
entities.
Do you have questions about your Samsung Mobile Phone?
For 24 hour information and assistance, we offer a new FAQ/ARS System (Automated Response System) at:
http://www.samsung.com/us/support
Headquarters:
1301 E. Lookout Drive
Richardson, TX 75082
Toll Free Tel:
Customer Care Center:
1000 Klein Rd.
Plano, TX 75074
1.888.987.HELP (4357)
Internet Address:
http://www.samsungusa.com
Nuance®, VSuite™, T9® Text Input, and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc. or its
affiliates in the United States and/or other countries.
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
The Bluetooth® word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered
trademarks and are wholly owned by the Bluetooth SIG.
Open Source Software
Some software components of this product incorporate source code covered under GNU General Public License (GPL), GNU Lesser General
Public License (LGPL), OpenSSL License, BSD License and other open source licenses. To obtain the source code covered under the open
source licenses, please visit:
http://opensource.samsung.com/
.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
1
Table of Contents
Section 1: Getting Started ..............................................4
Understanding this User Manual . . . . . . . . . . . . . . . . . . . . . . . . 4
Installing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Removing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Activating Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Section 2: Understanding Your Phone .........................10
Features of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Closed View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Open View (Front) of Your Phone . . . . . . . . . . . . . . . . . . . . . . . 11
Command Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Understanding the Display Screen . . . . . . . . . . . . . . . . . . . . . 14
Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Navigation Key Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Navigate Using a Shortcut . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Your Phone’s Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Section 3: Call Functions .............................................20
Making a Call — Number Entry Dialing . . . . . . . . . . . . . . . . . . 20
Making a Call — Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . 21
Making a Call — Quick Search Dialing . . . . . . . . . . . . . . . . . . 22
Making a Call — Voice Dialing . . . . . . . . . . . . . . . . . . . . . . . . 23
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
The In-Use Options Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Ignoring a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Adjusting the Call Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Calls Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Section 4: Entering Text ............................................... 31
Changing the Text Entry Mode . . . . . . . . . . . . . . . . . . . . . . . . 31
Using T9® Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Using Abc Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Entering Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Entering Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Entering Emoticons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Section 5: Understanding Your Contacts .................... 34
Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Finding a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Adding a New Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . 38
Editing a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Saving a Number After a Call . . . . . . . . . . . . . . . . . . . . . . . . . 41
Speed Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Contacts Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Memory Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Section 6: Messaging ................................................... 49
Types of Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Create and Send Text Messages . . . . . . . . . . . . . . . . . . . . . . 49
Receive Text Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Chat View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
2
Send Picture Messages in Camera Mode . . . . . . . . . . . . . . . . 53
Send Picture Messages in Standby Mode . . . . . . . . . . . . . . . . 55
Receive Picture Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Message Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Erase Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Message Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Section 7: Games & Apps .............................................66
Accessing Games and Apps . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Launching an Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Finding and Downloading Applications . . . . . . . . . . . . . . . . . . 67
Section 8: Camera ........................................................68
Taking Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Camera Screen Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Picture Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Camera Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Gallery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Point, Click, and Send Pictures . . . . . . . . . . . . . . . . . . . . . . . . 79
Section 9: Multimedia ..................................................80
Accessing Multimedia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
My Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
My Ringtones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Section 10: Navigator ...................................................83
Accessing Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Section 11: Tools/Utilities ............................................ 84
Tools/Utilities Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Cricket411 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Voice SVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Memo Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
World Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Stop Watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Tip Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Section 12: Changing Your Phone’s Setting ............. 103
Accessing Your Phone’s Settings . . . . . . . . . . . . . . . . . . . . . 103
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Call Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Phone Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Memory Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Phone Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Section 13: Health and Safety Information ............... 117
Exposure to Radio Frequency (RF) Signals . . . . . . . . . . . . . . 117
Specific Absorption Rate (SAR) Certification Information . . . 121
Smart Practices While Driving . . . . . . . . . . . . . . . . . . . . . . . 122
3
Battery Use and Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Samsung Mobile Products and Recycling . . . . . . . . . . . . . . . 125
UL Certified Travel Charger . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Display / Touch-Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
GPS & AGPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Responsible Listening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
FCC Hearing Aid Compatibility (HAC) Regulations
for Wireless Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Restricting Children's Access to Your Mobile Device . . . . . . . 134
FCC Notice and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Other Important Safety Information . . . . . . . . . . . . . . . . . . . . 135
Section 14: Warranty Information .............................136
Standard Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 136
End User License Agreement for Software . . . . . . . . . . . . . . 139
Index ............................................................................144
Getting Started 4
Section 1: Getting Started
This section explains how to start using your Samsung
SCH-R261 phone by activating your service, setting up your
Voicemail, or getting an understanding of how this manual is put
together.
Understanding this User Manual
The chapters of this guide generally follow the same order as the
menus and sub-menus in your phone. A robust index for quick
reference to most features begins on page 144.
Also included is important safety information that you should
know before using your phone. Most of this information is near
the back of the guide, beginning on page 117.
Notes and Tips
Throughout this guide there is text that is set apart from the rest.
These are intended to point out important information, quick
methods for activating features, to define terms, and more. The
definitions for these methods are as follows:
•
Notes
: Explain alternative options within the current feature, menu, or
sub-menu.
•
Tips
: Provide quick or innovative methods for performing functions
related to the subject at hand.
•
Important
: Points out important information about the current feature
that could affect performance, or even damage your phone.
5
Text Conventions
This manual provides condensed information about how to use
your phone. To make this possible, the following terms and icon
appear in place of repeatedly-used procedural steps:
Installing the Battery
Note:
Your phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and travel adapter.
Important!:
You must fully charge the battery the first time you use your
phone, otherwise you could damage the battery.
1. Insert the top end of the battery first, matching the gold
contacts on the inside of the battery to those on the phone.
2. Press lightly on the bottom end of the battery down into the
phone until it slips into place.
highlight
Use the Navigation key ( ) to move a
highlighting effect onto a menu item or screen
item of interest.
select
After “highlighting” a menu item or screen item,
press the
OK
key ( ) to launch, access, or save
a highlighted menu item or screen field of
interest.
➔ Used in place of “select” in long “drill down”
procedure steps.
Example:
Select
Settings
➔
Call Settings
➔
Call Answer
.
Getting Started 6
3. Place the battery over the battery (1) and press lightly
upward (2) until it clicks into place.
Removing the Battery
1. Press and hold to turn off the phone (if on).
2. Press down on the battery cover (1) and slide the cover
toward the bottom end of the phone. Lift the cover (2) up
and away from the phone, bottom end first.
3. Lift the bottom of the battery up (1) and away (2) from the
phone.
7
Charging the Battery
Your phone is powered by a rechargeable standard Li-Ion battery.
Only use Samsung-approved charging devices and batteries.
Samsung accessories are designed to maximize battery life. Use
of other accessories may invalidate your warranty and may cause
damage.
Use the Travel Adapter
The travel adapter included with your phone is a convenient,
light-weight charger that rapidly charges your phone from any
120/220 VAC outlet.
1. Plug the large end of the Travel Adapter into a standard
120 VAC or 220 VAC wall outlet.
Important!:
For connection to an electrical supply not located in North
America, you must use an adaptor of the proper configuration for
the power outlet. Use of the wrong adapter could damage your
phone and void your warranty.
2. Insert the smaller end of the Travel Adapter into the
charger/accessory connector on the right side of your
phone.
Important!:
You must unplug the adapter before removing the battery from
the phone during charging to avoid damage.
Correct
Incorrect
Getting Started 8
Low Battery Indicator
The battery indicator ( ) in the upper-right corner of the
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
Three bars ( ) indicate a full charge.
An empty battery icon ( ) indicates a near empty battery.
A blinking empty battery icon ( ) and a tone sounding
indicate you have two to three minutes before the battery is too
low to operate the phone.
If you continue to use your phone without charging its battery, the
phone will shut down.
Activating Your Phone
Contact your Wireless Carrier and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.
Turning Your Phone On
1. If closed, open your phone, as shown.
2. Press . The display lights.
•
The phone begins searching for a network signal.
•
Once the phone finds a signal, the time, date, and day appear at
the top of the display.
•
You’re now ready to place and receive calls.
Note:
If you are outside of your carrier’s coverage or roaming area, the No
Service icon ( ) appears at the top of the phone’s display. If you
cannot place or receive calls, try later when service is available, or at
another location.
Turning Your Phone Off
1. If closed, open your phone.
2. Press and hold for two or more seconds. Your phone
powers off.
Note:
If your phone is on and you press for less than one second, the
phone will not power off. This prevents your phone from being turned
off accidentally.
9
Setting Up Your Voicemail
Voicemail allows callers to leave voice messages, which can be
retrieved any time.
Note:
Once your Voicemail account has been set up, you can use the
Voicemail folder (under the Message menu) to view details of voice
messages in your Voicemail box.
To dial Voicemail:
1. In standby mode, press and hold or dial your own
mobile number.
2. Follow the prompts in the new user tutorial to setup your
mail box.
Listen to Voicemail
䊳
In standby mode, press and hold or dial your own
mobile number to dial Voicemail. After connecting, you will
hear your voice greeting. You are prompted to enter your
password.
Understanding Your Phone 10
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also
describes the screen format and the icons that will be displayed
when the phone is in use.
Features of Your Phone
•
Domestic and international voice and text messaging service (available
on participating networks).
•
High speed data (CDMA 2000 1x Technology)
•
Bluetooth
®
Wireless Technology (see Note)
•
Global Positioning System (GPS) Technology
•
PIM Functions
•
Picture (MMS) Messaging
•
Text (SMS) Messaging
•
Email Messaging
•
Built-in VGA Digital Camera
•
Voice Dial
Note:
The R261 phone supports the wireless Headset, Handsfree, Object
Push, File Transfer, and Phone Access profiles for Bluetooth® wireless
technology. The R261 does not support Bluetooth OBEX profiles. (For
more information, refer to “Bluetooth Settings” on page 86.)
Closed View of Your Phone
Features
1.
Camera Lens
: The lens of your built-in camera.
2.
Volume Key
: Lets you adjust the ring volume in standby
mode, adjust the voice volume during a call, or mute the
ringer during an incoming call.
1
3
4
5
2
11
3.
Front Display
: Indicates the status of your phone, including
status icons, message indicators, signal strength, and so
on.
4.
Camera Key
: Launches the Camera feature of your phone
and takes photos.
5.
Power / Accessory Connector
: Used to connect an optional
headset (for hands free operation), or optional TTY device,
charging accessories, or optional accessory cables to your
phone. (For more information, refer to “Charging the
Battery” on page 7.)
Open View (Front) of Your Phone
Features
1.
Earpiece
: Lets you hear ringing and alert tones, alarm
tones, and the other parties to calls.
1
2
3
4
5
6
7
89
10
14
13
12
11
Understanding Your Phone 12
2.
Main Display
: Indicates the status of your phone, including
numbers dialed, feature and function screens, status
icons, message indicators and contents, signal strength,
and so on.
3.
Navigation Key
: In Menu mode, lets you scroll through the
phone menu options. In Standby mode, lets you access
preset functions and one user-defined function.
4.
Left Soft Key
: Used to navigate through menus and
applications and to select the choice indicated at the
bottom left corner of the Main LCD.
5.
SEND Key
: Lets you place or receive a call. In standby
mode, press the key once to access the recent calls log.
6.
Voicemail Key
: Lets you speed dial your Voicemail account
to review your voice messages.
7.
Special Function Keys
: Enter special characters. Perform
various functions.
8.
Voice Recognition Key
: Used to launch Voice SVC voice
recognition system.
9.
Microphone
: Lets the other caller hear you clearly when
you are speaking to them.
10.
Alpha-numeric Keys
: Use these keys to enter numbers,
letters, and characters.
11.
END Key
: Ends a call. If you press and hold the END key, the
power goes On or Off. When you receive an incoming call,
press to send the call to voicemail.
12.
CLR Key
: Deletes characters from the display when you are
in text entry mode. Press this key to return to the previous
menu or screen when navigating features on your phone.
13.
Right Soft Key
: Used to navigate through menus and
applications and to select the choice indicated at the
bottom right corner of the Main Display.
14.
OK Key
: Pressing when navigating through a menu accepts
the highlighted choice in a menu.
Command Keys
Functions for the soft keys are defined by what appears above
each in the display. There are two soft keys, Left ( ) and Right
().
Left Soft Key
Some functions of the Left soft key ( ) are as follows:
•
In standby mode, press the
Menu
soft key ( ) to launch the Main
menu.
•
When the Left soft key function is Edit, press the
Edit
soft key ( ) to
edit a Contacts entry.
13
Right Soft Key
Some functions of the Right soft key ( ) are as follows:
•
In standby mode, press the
Contacts
soft key ( ) to launch the
Contacts
Find
screen.
•
When the Right soft key function is Options, press the
Options
soft key
( ) and a pop-up menu appears.
OK Key
•
In standby mode, press the
OK
key ( ) to launch the Widget
highlighted in the quick access menu.
•
In a menu, press to accept the highlighted selection.
•
In camera mode, press to take a photo or to create a Picture
message.
•
When the
OK
key function is Edit, press the
Edit
key ( ) to edit a
Draft message.
Send Key
The
Send
key ( ) is used to answer calls, dial calls, and to
recall the last number(s) dialed, received, or missed.
•
Press once to answer calls.
•
Enter a number and briefly press to make a call.
•
Briefly press in standby mode to display a list of recent calls to
and from your phone.
•
Press twice in standby mode to call the most recent number.
•
Press to pick up a waiting call. Press again to switch back
to the other call.
Clear Key
The
CLR
key ( ) is used to erase or clear numbers, text, or
symbols from the display. You can also use the key to return to a
previous menu or to return to standby mode from any menu.
•
If you enter an incorrect character, briefly press to backspace
(and delete) the character.
•
To erase the entire sentence, press and hold .
•
To back up one menu level, briefly press .
End Key
•
Press and hold the End key to turn your phone on or off.
•
Briefly press once to disconnect a call.
•
Press to return to standby mode from any menu, or to cancel the
last input.
Navigation Key
Use the directional keys on the Navigation key ( ) to browse
menus, sub-menus, and lists. Each directional key also acts as a
shortcut to launch applications.
Camera Key
Use the Camera key ( ) on the right side of the phone to
activate the camera built into your phone and to take pictures.
Understanding Your Phone 14
Understanding the Display Screen
1. The top line of your phone’s
display contains icons that
indicate network status,
battery power, signal
strength, connection type,
and more.
2. The Main Clock shows the
day, date, and time.
3. The center portion of the
display shows information
such as call progress information, messages, and photos.
4. The bottom line of the display shows current soft key
functions.
The sample screen shows that pressing the Left (
Menu
)
soft key will launch the Main menu, pressing
OK
( ) will
launch the Widget highlighted in the quick access menu,
and pressing the Right (
Contacts
) soft key will show the
Contacts
Find
screen.
Display Screen Icons
Your R261 phone can show you definitions of the icons that
appear on the top line of the display.
To access the Icon Glossary:
䊳
In standby mode, press
Menu
, then select
Settings
➔
Phone Info
➔
Icon Glossary
. A list appears showing the
icons that can appear on the top line of the displays.
15
Dialogue Boxes
Dialogue boxes prompt for action, inform you of status, or warn
of situations such as low battery. Dialogue boxes and their
definitions are outlined below.
•
Choice
–
Example:
“Save Message?”
•
Reconfirm
–
Example:
“Erase All Messages?”
•
Performing
–
Example:
“Sending...” “Connecting...”
•
Completed
–
Example:
“Message Saved”
•
Information
–
Example:
“New Message”
•
Error
–
Example:
“System Error!”
•
Warning
–
Example:
“Low Battery,” “Memory Full!”
Backlights
Backlights illuminate the display and the keypad. When you press
any key or open the phone, the backlights come on. They go off
when no keys are pressed within a period of time set in the
Backlight menu.
Note:
During a phone call, the display backlight dims and turns off after 7
seconds to conserve battery power, regardless of the Backlight setting.
(For more information, refer to “Backlight” on page 105.)
Menu Navigation
Access the menus and sub menus in your phone using the
navigation key ( ) and soft keys ( ), or use a
shortcut.
1. In standby mode, press
Menu
. The first of several
menus appears in the display.
Note:
More than one menu may appear in your display. This setting can be
modified in the Display/Menu Style menu.
Tip:
You can launch any of the Main Menus by using a voice command — In
standby mode, press and hold until the phone prompts, “Say a
command.” Say “Go to” followed by a Main Menu name into the
microphone. For example, Say “Go to Games & Apps” to access the
Games & Apps menu.
2. Use the navigation key to browse through the menus.
Understanding Your Phone 16
3. To enter the menu or sub menu that appears in the display,
press .
4. Press the Back soft key to return to the previous menu.
Return to the Previous Menu
•
Press the
Back
soft key to return to a previous menu.
•
When
Back
does not appear in the display, press to return to the
previous menu.
Navigation Key Shortcuts
In standby mode, press a navigation key to launch the key’s
corresponding application.
Navigate Using a Shortcut
You can also access menus and sub menus using menu
numbers. After pressing
Menu
, press the menu number to
go directly to the menu or sub menu of your choice. Before you
can navigate using a shortcut, you’ll need the menu or sub-menu
number that you wish to access.
1. In standby mode, press Menu.
2. Press the number of the menu, sub menu, and so on for
the feature that you wish to access.
Example:
Press Menu, then press , . This takes you to the
Tools/Utilities menu (Menu 7), and then to the Calculator (sub
menu 8).
Messages
Browser
17
Your Phone’s Modes
Standby Mode
Standby mode is the state of the phone once it has found service
and is idle. The phone goes into standby mode:
•
After you power the phone on.
•
When you press after a call or from within a menu.
In standby mode, you will see the time, day, and date as well as
all phone status icons.
Placing Calls in Standby Mode
1. To place a call while in standby mode, enter a phone
number, and press .
2. To return to standby mode, press .
Receiving Messages in Standby Mode
You can receive messages in standby mode. An alert tone sounds
and a notification message appears in the display when a new
message arrives. The following call message options appear:
•
View Now
: This selection allows you to view the messages now.
•
View Later
: This selection allows you to view the messages at a later
date.
Highlight the desired viewing option and then press .
Adjusting Your Phone’s Master Volume
In standby mode, press the Volume key (on the left side of the
phone) up or down.
1. In standby mode, press the Volume key up or down to set
the call ringer volume as desired.
Options are:
Tip:
You can add vibration to Master Volume settings
Low
–
High
. Just press
Vib.on
.
2. When you are satisfied with the setting, press
SET
. Your
phone returns to standby mode.
Tip:
You can also access the
Master Volume
setting by pressing
Menu
➔
Settings
➔
Sound Settings
➔
Master Volume
. Use the Volume key on
the left side of your phone to adjust the ringer volume setting.
Note:
The Vibrate icon ( ) appears in the display when the phone is in
Vibrate
mode. The Vibrate/Ring icon ( ) appears in the display when
you press
Vib.on
with Master Volume set to
Low
–
High
.
• Silence All • Medium
•Vibrate •Medium/High
•Low •High
•Low/Medium
Understanding Your Phone 18
Call Answer Mode
You can choose to answer a call by pressing any key except
or , by pressing only , or by opening the phone’s flip.
(For more information, refer to “Call Answer” on page 108.)
Talk Mode
You can place and receive calls only when your phone is on.
While in a call, your phone is in talk mode. Press the
Options
soft
key to display a list of menu options. (For more information, refer
to “The In-Use Options Menu” on page 25.)
Enter/Exit Vibrate Mode
Silences the tones your phone plays and vibrates your phone,
instead.
To enter Vibrate Mode:
䊳
In standby mode, press and hold . “
Entering Vibrate
Mode
” briefly appears in the display and your phone
returns to standby mode with the Vibrate icon ( )
appearing in the display.
To exit Vibrate Mode:
䊳
While in Vibrate mode and standby mode, press and hold
. “
Exit Vibrate Mode
” briefly appears in the display and
your phone returns to standby mode with the Ring icon
( ) appearing in the display.
Tip:
You can also put your phone in Vibrate mode by repeatedly pressing the
Volume key ( ) down until “
Vibrate
” appears in the display.
The Volume key is on the left side of phone.
Speakerphone Mode
Speakerphone mode increases the sound volume through the
earpiece during a call. This lets you conduct a call handsfree,
and/or lets you share a call with others.
To enter Speakerphone Mode:
䊳
During a call, press the
Options
soft key, then select
Speaker On
.
Caution!:
While in Speakerphone mode, hold your phone away from your ear.
(For more information, refer to “Responsible Listening” on
page 129.)
To exit Speakerphone Mode:
䊳
During a call, press the
Options
soft key, then select
Speaker Off
.
– or –
Press .
19
Handsfree Mode
Handsfree mode lets you operate your phone remotely, without
touching it other than to turn it on or off.
To place your phone in Handsfree mode, do one of the following:
•
Connect an optional wired headset.
– or –
•
Pair and connect with an optional Bluetooth technology headset or
hansfree car kit. (For more information, refer to
“Add New Device”
on page 85.)
Camera Mode
Camera mode lets you take pictures with your phone’s camera.
In Camera mode, you can also adjust the resolution and
appearance of your pictures.
(For more information, refer to “Camera” on page 68.)
•
Entering Camera Mode
: In standby mode, press and hold the Camera
key ( ) — on the right side of the phone.
•
Exiting Camera Mode
: Press .
Note:
You can also enter Camera mode by pressing
Menu
and selecting
Multimedia
➔
Camera
.
Input mode
Input mode determines how you enter text, numbers, and
symbols. While at any text entry screen, press the Left soft key,
then choose the input mode from the pop-up menu using the
Navigation key. Optional input modes are
T9 Word
,
Abc
,
123
, and
Symbols
. (For more information, refer to “Entering Text” on
page 31.)
Tip:
You can cycle between
T9 Word
,
Abc
, and
123
by repeatedly pressing
and holding until the phone beeps.
Lock Mode
When the phone is in Lock Mode, restrictions are placed on
phone use. You can receive calls and messages, but cannot place
outgoing calls (except for emergency numbers) until you unlock
the phone. Lock Mode also restricts access to menus and the
Volume key. Unlock your phone by entering the lock code when
prompted. (For more information, refer to “Lock Phone” on
page 111.)
Call Functions 20
Section 3: Call Functions
This section explains how to make and answer calls. This section
also includes the features and functionality associated with
making or answering calls.
Making a Call — Number Entry Dialing
1. With the phone on, enter the number you wish to call using
the keypad.
2. Press to place the call.
Dialing Emergency Numbers
To place an emergency call:
1. With the phone on, enter 911 using the keypad.
2. Press to place the call.
You can specify other numbers as emergency numbers using the
Emergency # settings. (For more information, refer to
“Emergency #” on page 112.)
Important!:
Emergency number 911 is preset into your phone. You can dial
this number almost any time, even when the phone is locked or
restricted.
If you call 911 an audible tone is heard and an Emergency
prompt appears in the display for the duration of the call.
Important!:
Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
Important!:
DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.
Dialing International Numbers
Call Another Country — Manual Method
1. In standby mode, enter 011 (the three-digit exit code for
the United States).
2. Enter the country code for the country that you are calling.
3. Enter the number that you wish to call, then press .
Note:
Puerto Rico and Canada are on the North American dialing plan.
Making calls to Puerto Rico and Canada is similar to making calls
within the United States, no unique country codes are necessary.
21
Call Another Country — Shortcut Method
1. In standby mode, press and
hold until a plus sign (+)
appears in the display.
Note:
When you press , your phone
automatically replaces this + with
011, the three-digit exit code for the
United States.
2. Enter the country code for the
country that you are calling.
3. Enter the number that you
wish to call, then press .
Manual Pause Calling
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
•
2-Sec Pause
: P pause — A two-second pause stops the calling
sequence for two seconds and then automatically sends the remaining
digits.
•
Wait
: W pause — A hard pause stops the calling sequence until you
press .
To manually call a number with pause(s) without storing it to your
Contacts:
1. Enter the number you wish to call.
2. Press Options. A pop-up menu containing the following
options appears in the display:
•
2-Sec Pause
: a two-second pause.
•
Wait
: a hard pause (awaits input from you).
3. Highlight the desired pause option.
4. To enter the highlighted pause into your number sequence,
press .
Note:
If you select 2-Sec Pause, P appears in the display. If you select Wait,
W appears in the display.
5. Press to call the number.
Making a Call — Speed Dialing
You can store phone numbers and contact names in your phone’s
Contacts list. Speed Dialing lets you quickly and easily dial any
contact in your Contacts list by using that contact’s location
number in the list. You can assign and change location (speed
dial) numbers for your contacts. (See “Assignment During Entry
Creation” on page 43.)
Call Functions 22
One-Touch Dialing
Speed Dial numbers 2 through 9 are special One-Touch dialing
numbers. You can call the phone numbers stored in your phone’s
Contacts list and assigned Speed Dial numbers 2 through 9 by
pressing and holding a single key.
Example:
For Speed Dial number 3, press and hold until the name and
number appear in the display and the number is dialed.
Two-Touch Dialing
Memory locations 10 through 99 are special Two-Touch dialing
locations.
Example:
For location number 13, briefly press , then press and hold
until the name and number appear in the display and the
number is dialed.
Three-Touch Dialing
Memory locations 100 through 999 are special Three-Touch
dialing locations.
Example:
For location number 113, briefly press , briefly press
again, then press and hold until the name and number appear
in the display and the number is dialed.
Pause Dialing From a Contacts Entry
•
If you speed dial a contact that contains (two-second) P pause(s)
simply wait for the pauses to pass and the dialing to complete.
•
If you speed dial a contact that contains (hard) W pause(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
Making a Call — Quick Search Dialing
Use the Quick Search feature to dial
any number stored in your Contacts
list by pressing the number keys that
correspond to the first few letters of
a Contact name. (For more
information, refer to “Quick Search”
on page 115.)
Quick Search Dialing a Contact
To find and dial a Contact, do the
following:
1. In standby mode, press the number keys that correspond
to the first few letters of the Contact name, as shown.
23
2. Press the Up navigation key.
The Contact List screen
appears showing the desired
Contact name, as shown.
3. If needed, use the Up and
Down navigation keys to
highlight the Contact you wish
to call.
4. Press to call the
highlighted Contact.
Making a Call — Voice Dialing
Your R261 mobile phone includes state-of-the-art voice
recognition software that lets you dial numbers using your voice.
Using Voice Dial
Use the Voice Dial command to dial any number stored in your
Contacts list by saying the name of the contact (Name Dialing).
You can also use Voice Dial to dial any valid telephone number,
even numbers not stored in your Contacts list, by speaking the
individual digits in the number (Digit Dialing).
Voice Dialing Tips:
•
Wait for the beep before speaking.
•
Speak clearly at a normal volume, as if you were talking to someone
on the phone.
•
When saying a name, say the first name then the last name.
Dialing a Name
To dial a name, do the following:
1. In standby mode, press and hold .
“Say a Command” appears in the display and is
pronounced through the earpiece.
2. Say, “Call”.
You are prompted to “Say the name or #”.
3. Speak clearly and say the name of a person in your
Contacts list, first name followed by last name.
If the name is recognized, Voice Dial repeats the name and
dials the number.
If Voice Dial is not sure which name you said, it displays a
choice list of up to three names and prompts you with “Did
you say?” followed by the first name on the list.
4. Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
the list. (For more information, refer to “Choice Lists” on
page 89.)
•
Press
Repeat
to say the name again.
•
Press
Settings
, then press
Exit
to exit Voice Dial without dialing.
Call Functions 24
If the recognized name has multiple numbers stored for it
(that is, Home, Work, Mobile, and so on), Voice Dial
displays the possible choices and prompts you with
“Which number?”
5. Say one of the following number types:
•
“
Home
”
•
“
Work
”
•
“
Mobile
”
Voice Dial dials the specified number.
Dialing a Number
To dial a number using Voice Dial, do the following:
1. In standby mode, press and hold .
“Say a Command” appears in the display and is
pronounced through the speaker.
2. Say “Call”.
Voice SVC prompts you to “Say the name or #”.
3. Speak clearly and say the telephone number of the person
you want to call. For example, say “7 8 1 5 5 5 6 2 0 0."
If it recognizes the number, Voice Dial repeats and dials the
number. If Voice Dial is not sure it has recognized the
number, it displays a choice list of up to three numbers and
prompts you with “Did you say?” followed by the first
number on the list.
4. Say “Yes” to confirm the number or “No” to hear the next
one, or use the keypad to select the correct number from
the list. (For more information, refer to “Choice Lists” on
page 89.)
•
To say the name again, press
Repeat
.
•
To exit Voice Dial without dialing, press .
Pause Dialing From a Contacts Entry
•
If you voice dial a contact that contains (two-second) T pause(s) simply
wait for the pauses to pass and the dialing to complete.
•
If you voice dial a contact that contains (hard) P pause(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
Answering a Call
Your phone notifies you of a call in the following ways:
•
A ring tone sounds and/or your phone vibrates (Your phone provides
seven ring volume settings including:
Silence All
,
Vibrate
,
Low
,
Low/Medium
,
Medium
,
Medium/High
, or
High
, and/or
different
ring types to distinguish callers.)
•
A phone number (unless blocked by the caller) and a name appear in
the display (If the caller’s number and name are stored in your
Contacts list).
•
If the caller can’t be identified,
Call from unavailable#
,
Call from
restricted number
, or no number appears in the display.
25
•
Your phone continues to notify you of the call until one of the following
events occurs:
–You answer the call.
–You ignore the call.
–The calling party ends the call.
–The call is sent to voicemail.
Answering an Incoming Call
䊳
Open the flip on your phone, if
closed, and/or press . The
ring tone and/or vibration stop
and the caller’s voice can be
heard in the earpiece.
Tip:
You can set your phone to automatically
answer calls or to answer calls when
you press any key but the key or
automatically, as indicated by the Auto
Answer icon ( ). (For more
information, refer to “Call Settings” on
page 108.)
The In-Use Options Menu
You can access numerous menus and features while in a call.
Note:
If the call is disconnected while you are accessing the In-Use Option,
the In-Use Option disappears from the display and the phone
eventually returns to standby mode.
1. While in a call, press Options.
The following menu items appear in the display:
•Speaker On
/
Off
: Enables/disables Speakerphone mode during
this call. (For more information, refer to
“Speakerphone Mode”
on page 18.)
•
Message
: The
Messages
menu appears in the display. (For
more information, refer to
“Messaging”
on page 49.)
•
Contacts
: The Contacts
Find
screen appears in the display.
• Recent Calls
: The
All
Calls Log screen appears in the display.
•
Send DTMF
: Send your phone number as DTMF tones.
•
Location
: Lets you change your phone’s Location setting. (For
more information, refer to
“Location”
on page 103.)
Do one of the following:
•
Select the desired sub-menu or feature.
•
Exit the menu by pressing .
Tip:
You can block/restore sound going to the other parties on this call by
pressing Mute / Unmute. This can reduce noise on conference calls.
Ignoring a Call
When you ignore an incoming call, the call is immediately
forwarded to your voice mail.
䊳
During an incoming call, press Ignore. The caller is
forwarded to your voice mail.
Call Functions 26
Adjusting the Call Volume
In standby mode, repeatedly press the Volume key ( ) down
until the Call Volume Level desired appears in the display. The
Volume key is on the left side of phone.
Calls Log
The Calls log retains information about Outgoing, Incoming, and
Missed calls. You can also view times for your last call and the
time totals for all calls.
Review the Calls Log
1. In standby mode, press Menu, then select
Recent
Calls
. The following Calls logs and options appear in the
display:
• Outgoing Calls
• Incoming Calls
• Missed Calls
• All Calls
• Call Timer
• Data Counter
2. Select the Calls log that you wish to review or the function
you wish to access.
Note:
In cases where there is a Contacts match for a Calls log entry, the
name associated with the number appears in the display instead of the
number.
Outgoing Calls
Your phone retains information about the last 90 outgoing calls
and stores them in the Outgoing calls log. You can review the
Outgoing calls log for the time and date of a call, as well as other
information.
Note:
To quickly view your most recent calls, briefly press in standby
mode. Up to 270 of your most recent outgoing, incoming, and missed
calls appear in the display.
1. At the
Recent Calls
menu, select Outgoing Calls. A list of
your outgoing calls appears in the display.
2. Highlight a call, then press OPEN to view the Name of
the called party (if in the Contacts list), the number dialed,
the time and date the call was placed, and the duration of
the call (in minutes and seconds).
3. Press Options. A pop-up menu containing the following
options appears in the display:
•
Save
: Save the number to your Contacts.
•
Details
: Calls to Contacts Only — Shows the entry for the called
Contact.
27
•
Erase
: Erase the selected call from your Outgoing call log.
•
Lock/Unlock
: Protect the selected call from being erased.
•
Erase all
: Erase all calls from your Outgoing call log.
•
View Timer
: Shows the number of calls and/or the total time spent
on the Last Call, Home Outgoing, Home Incoming, Roaming Calls,
All Calls, Last Reset, and Lifetime Calls.
4. Press Msgs to launch the Send Message menu. The
following options appear in the display:
•
Text Message
: Lets you send a text message to the selected
number called.
•
Picture Message
: Lets you send a picture message to the
selected number called.
Note:
For more information, refer to “Types of Messages” on page 49.
5. Select the desired message type to compose a message.
Incoming Calls
Your phone retains information about the last 90 Incoming calls
and stores them in the Incoming call log. You can review the
Incoming call log for the time and date of the call, as well as
other information.
1. At the
Recent Calls
menu, select Incoming Calls. A list of
your Incoming calls appears in the display.
2. Highlight a call, then press OPEN to view the Name of
the caller (if in the Contacts list), the originating number,
the time and date the call was received, and the duration
of the call (in minutes and seconds).
3. Press Options. A pop-up menu containing the following
options appears in the display:
•
Save
: Save the number to your Contacts.
•
Details
: Calls from Contacts Only — Shows the entry for the
calling Contact.
•
Erase
: Erase the selected call from your Incoming calls log.
•
Lock/Unlock
: Protect the selected call from being erased.
•
Erase All
: Erase all calls from your Incoming calls log.
•
View Timer
: Shows the number of calls and/or the total time spent
on the Last Call, Home Outgoing, Home Incoming, Roaming Calls,
All Calls, Last Reset, and Lifetime Calls.
4. Press Msgs. The following options appear in the display:
•
Text Message
: Lets you send a text message to the selected
calling number.
•
Picture Message
: Lets you send a picture message to the
selected calling number.
Note:
For more information, refer to “Types of Messages” on page 49.
5. Select an option to perform its function.
Call Functions 28
Missed Calls
Your phone retains information about the last 90 missed calls
(calls that were never picked up) and stores them in the Missed
call log. You can review the Missed call log for the time and date
of the call, as well as other information.
1. At the
Recent Calls
menu, select Missed Calls. A list of
your missed calls appears in the display.
2. Highlight a call, then press OPEN to view the Name of
the caller (if in the Contacts list), the originating number,
and the time and date the call was received.
3. Press Options. A pop-up menu containing the following
options appears in the display:
•
Save
: Save the number to your Contacts.
•
Details
: Calls from Contacts Only — Shows the entry for the
calling Contact.
•
Erase
: Erase the selected call from your Missed call log.
•
Lock/Unlock
: Protect the selected call from being erased.
•
Erase All
: Erase all calls from your Missed call log.
•
View Timer
: Shows the number of calls and/or the total time spent
on the Last Call, Home Outgoing, Home Incoming, Roaming Calls,
All Calls, Last Reset, and Lifetime Calls.
4. Press Msgs. The following options appear in the display:
•
Text Message
: Lets you send a text message to the selected
called number.
•
Picture Message
: Lets you send a picture message to the
selected called number.
Note:
For more information, refer to “Types of Messages” on page 49.
5. Select an option to perform its function.
All Calls
You can review all of the calls log entries (outgoing, incoming,
and missed calls) for the time and date of a call, as well as other
information.
1. At the
Recent Calls
menu, select All Calls. A list of all
logged calls appears in the display.
2. Highlight a call, then press OPEN to view further
information about the call.
3. Press Options. A pop-up menu containing the following
options appears in the display:
•
Save
: Save the number to your Contacts.
•
Details
: Calls from Contacts Only — Shows the entry for the
calling/called Contact.
•
Erase
: Erase the selected call from your Calls log.
•
Lock/Unlock
: Protect the selected call from being erased.
•
Erase All
: Erase all calls from your Calls log.
29
•
View Timer
: Shows the number of calls and/or the total time spent
on the Last Call, Home Outgoing, Home Incoming, Roaming Calls,
All Calls, Last Reset, and Lifetime Calls.
4. Press Msgs. The following options appear in the display:
•
Text Message
: Lets you send a text message to the selected
calling/called number.
•
Picture Message
: Lets you send a picture message to the
selected calling/called number.
Note:
For more information, refer to “Types of Messages” on page 49.
5. Select an option to perform its function.
Call Timer
View the duration of your last call, total calls, and calls made
during the life cycle of you phone using the Call Timer feature.
Note:
Call Timer is not for billing purposes.
1. At the
Recent Calls
menu, select Call Timer. The following
timers appear in the display:
•
Last Call
: View the duration of your last call.
•
Home Outgoing
: View the duration of the total outgoing calls
made on your phone, in your home zone, since the last erasure.
•
Home Incoming
: View the duration of the total incoming calls
received on your phone, in your home zone, since the last erasure.
•
Roaming Calls
: View the total calls duration on your phone while
roaming since the last erasure.
•
All Calls
: View the duration of the total call, incoming, outgoing,
and data calls made on your phone since the last erasure.
•
Last Reset
: View the time and date all timers were last reset.
•
Lifetime Calls
: View the duration of all calls since your phone was
activated.
2. To reset a selected counter (except Last Reset and Lifetime
Calls), highlight the desired counter and press Reset.
3. To reset all counters except Lifetime Calls, press Reset All.
4. To exit the
Call Timer
list, press .
Note:
Although most call timers can be erased, the Lifetime call timer can
never be erased.
Data Counter
View the amount of Transmit data, Receive data, and Total data
transmitted or received since the last time you reset the data
counters, and the Lifetime amount of data transmitted or
received.
Note:
Data Counter is not for billing purposes.
1. At the
Recent Calls
menu, select Data Counter. The
following options appear in the display:
Call Functions 30
•
Transmit
: View the total amount of data transmitted by your phone
since the last reset.
•
Received
: View the total amount of data received by your phone
since the last reset.
•
Total
: View the total amount of data sent or received by your phone
since the last reset.
•
Last Reset
: View the time and date all timers were last reset.
•
Lifetime Data Counter
: View the total amount of data sent or
received by your phone since activation (Lifetime Data Counter
cannot be reset).
2. To reset a selected counter (except Last Reset and Lifetime
Data Counter), highlight the desired counter and press
Reset.
3. To reset all counters except Lifetime Data Counter, press
Reset All.
4. To exit the
Call Timer
list, press or .
Note:
Although most data counters can be erased, the Lifetime Data Counter
can never be erased.
Roaming
What is Roaming?
Roaming lets you use your R261 phone when you travel outside
of your Wireless Carrier’s coverage area. The Roaming icon ( )
appears in the top line of the display when Roaming is active,
and extra charges may apply when making or receiving calls.
Note:
Some features may be unavailable while roaming. Roaming also
consumes additional power from the battery requiring more frequent
recharging. Contact your Wireless Carrier for more information about
Roaming.
How Roaming Works
Roam Option lets you set roaming preferences if you move in and
out of your home network. The following roaming options are
available:
•
Home Only
: Your phone is available for normal operation only in the
designated coverage area.
•
Automatic
: Your Wireless Carrier’s Preferred Roaming List (PRL) of
networks is used to acquire service. If no preferred networks are
found, any digital system is acquired.
Note:
For more information, refer to “System Select” on page 114.
31
Section 4: Entering Text
This section outlines how to select the desired text entry mode
when entering characters using the phone keypad. This section
also describes how to use the T9 predictive text entry system to
reduce the number of key strokes needed to enter text.
Changing the Text Entry Mode
Text messages can be made up of alphabetical characters,
numbers, and symbols. You can use the following text entry
modes to simplify text entry:
•
T9 Word
: Press each phone key only once to enter the letter of the
word that you’re spelling. T9 WORD mode letter options are:
–
T9 Word
: Enter initial capital letters
–
T9 WORD
: Enter all upper case letters
–
T9 word
: Enter all lower case letters
•
Abc
: Enter letters by repeatedly pressing each phone key until the
desired character (as shown on the key) appears in the display. ABC
mode letter options are:
–
Abc
: Enter initial capital letters
–
ABC
: Enter all upper case letters
–
abc
: Enter all lower case letters
•
123
: Enter numbers by pressing the corresponding keys on the phone
keypad.
•
Symbols
: Using the phone keypad, enter a symbol into your message
by pressing the number to the left of the symbol in the
SYMBOLS
pop-
up window.
•
Emoticons
: Using the phone keypad, enter an emoticon into your
message by pressing the number to the left of the emoticon in the
EMOTICONS
pop-up window.
The current text entry mode (
T9 Word
,
Abc
,
ABC
,
123
, or
Symbols
)
is indicated in the lower part of a text entry screen. To change the
text entry mode while composing a text message:
䊳
Repeatedly press and hold to toggle between
Abc
,
123
, and
T9Word
modes.
Or, do the following:
1. Press the Left soft key.
2. Highlight one of the following text entry modes:
• T9Word
•Abc
•123
•Symbols
•Emoticons
3. Press .
Entering Text 32
Using T9
®
Mode
T9 Word recognizes commonly used words for the numeric
sequence of key presses and inserts the word into your message.
T9 Word is much faster than the traditional method of text entry
(Abc) and requires only one key press per letter of the word that
you’re spelling.
1. While composing a text message, press the Left soft key,
then select
T9Word
.
2. For practice, enter the word “
Samsung
” by pressing each
of the following keys only once:
T9 Word recognizes that the most commonly used word for
the numeric sequence you just entered is “Samsung.”
If more than one word shares the same numeric sequence,
T9 Word pops-up the most commonly useds. Press the
Navigation key Up or Down to display other words, if
available.
Note:
To enter a space, press . To enter a period, press . These key
functions apply to both T9 Word and Abc modes. (For other symbols,
see “Entering Symbols” on page 33.)
Using Abc Mode
1. While composing a text message, press the Left soft key,
then select
Abc
or
ABC
.
2. Enter characters while in Abc mode by pressing a key
repeatedly until the desired character appears in the
display.
Example:
Press once for “
G
” and twice for “
H
”.
3. Pause briefly and the displayed character is accepted and
inserted into your message.
4. To enter a space, press . To enter a period, press
.
Entering Numbers
Enter numbers into a text message while in 123 mode.
1. While composing a text message, press the Left soft key,
then select
123
.
2. Enter numbers while in 123 mode by pressing the key
labeled with the corresponding number that you wish to
insert into your message.
SAMSUNG
33
Entering Symbols
Enter symbols such as “@” or “%” into a text message.
1. While composing a text message, press the Left soft key,
then select
Symbols
. The first of three symbol screens
appears in the display.
2. Use the
Prev
and
Next
soft keys to page through the other
symbols, if desired.
3. Press the key that corresponds with the symbol that you
wish to enter.
Example:
Press for an exclamation point (
!
).
4. Repeat these steps to insert additional symbols into your
message.
Entering Emoticons
Enter symbols such as “:)” or “;-)” into a text message.
1. While composing a text message, press the Left soft key,
then select
Emoticons
. The first of two emoticon screens
appears in the display.
2. Use the
Prev
and
Next
soft keys to page through the other
emoticons, if desired.
3. Press the key that corresponds with the emoticon that you
wish to enter.
Example:
Press for
:D
.
4. Repeat these steps to insert additional emoticon into your
message.
Understanding Your Contacts 34
Section 5: Understanding Your Contacts
This section details how you can manage your daily contacts by
storing their names and numbers in your Contacts list. You can
have your Contacts entries sorted by name.
Contacts
Up to 1000 entries can be stored in Contacts. Each entry can
have up to five associated phone numbers and one Email
address. Each phone number can be up to 32 digits in length,
including
2-Sec
or
Wait
pauses (see “Manual Pause Calling” on
page 21 for more information), and associated names can be up
to 32 characters in length. You can assign the Speed Dial
numbers of your choice for each entry. You can also mark your
Contacts list as Restricted to prevent unauthorized viewing. (For
more information, refer to “Restriction” on page 113.)
Tip:
Speed Dial
One-Touch Dialing
,
Two-Touch Dialing
, and
Three-Touch
Dialing
allow you to call numbers stored in Contacts faster. (For more
information, refer to “Speed Dial” on page 43.)
Open Contacts
1. In standby mode, press Menu, then select
Contacts
.
Tip:
To launch the Contacts menu using a voice command — In standby
mode, press and hold until the phone prompts, “Say a command.”
Say “Go to Contacts” into the microphone.
The following options appear in the display:
•Find
: Find a Contacts entry by name.
Tip:
You can also access the
Find
option from standby mode, by pressing
Contacts
or by pressing and holding until the phone prompts, “Say
a command.” Say “Lookup” followed by a Contact name into the
microphone.
• Add New Entry
: Add a number or Email address to your Contacts.
•Speed Dial
: Assign a Contacts entry to a Speed Dial number. (For
more information, refer to
“Speed Dial”
on page 43.)
•Group
: Review, send messages to, add Contacts to, or rename four
out of your five groups. (For more information, refer to
“Contacts
Groups”
on page 45.)
•Memory Info
: Display used and available memory for Contacts
entries.
2. Select the option of your choice.
35
Note:
You can also press the keypad number key that corresponds to the
menu option number.
Finding a Contacts Entry
Shortcut Key Method
If you’ve stored a name entry in Contacts, Find allows you to find
it quickly by entering the first few letters of a Contact’s name.
1. In standby mode, press
Contacts
.
The
Find
screen appears in the display with the
Go To
field
highlighted, followed by the first few names in your
Contacts list.
Tip:
You can also access the
Find
screen/function from standby mode by
doing one of the following:
– Press
Menu
, then select
Contacts
➔
Find
.
– Press and hold until the phone prompts, “Say a command.” Say
“Lookup” followed by a Contact name into the microphone.
2. Enter the first few characters of a name as entered in
Contacts. For example, if you saved the name as “Amy
Smith”, begin the search by pressing (for “A”).
As you enter letters, the names of the closest matches
appear in the display.
3. When the desired entry is listed in the display, use the Up/
Down navigation keys to highlight the entry.
•
Press to dial the number associated with the name.
•
Press
Edit
to add or change information for this entry.
Understanding Your Contacts 36
•
Press
View
to show information about the entry.
•
Press
Options
. The following options appear in the display:
–
New Contact
: Add a new entry to Contacts.
–
Erase
: Erase the name and associated information.
–
Send Txt Msg
: Create and send a text message to the selected
Contact.
–
Send Pic Msg
: Create and send a picture message to the selected
Contact.
–
Call
: Dial the number associated with the name.
–
Send Name Card Via Bluetooth
: Send selected Contacts to another
Bluetooth device.
Select the desired option to access its sub-menu appears in the display.
Voice Method
Use the Voice SVC Lookup command to view contact information
for any named contact stored in your Contacts list by saying the
name.
Note:
The
Lookup
command shows the requested contact information in the
display but does not dial any phone numbers for the contact.
To look up information for a specific contact:
1. In standby mode, press and hold to launch Voice SVC.
“
Say a Command
” appears in the display and is
pronounced through the speaker.
2. Say “
Lookup
”.
Voice SVC prompts you to “
Say the name.
”
3. Speak clearly and say the full name of the person you want
to call, exactly as it is entered in your Contacts list.
•
If Voice SVC recognizes the name you said, the Contact entry
information for that name appears in the display.
•
If Voice SVC does not recognize the name you said, a choice list of
up to three names appears in the display, and Voice SVC prompts
you with “
Did you say?
” followed by the first name on the list.
4. Say “
Yes
” to confirm the name or “
No
” to hear the next
name, or use the keypad to select the correct name from
the list. (For more information, refer to “Choice Lists” on
page 89.)
37
•
To say the name again, press
Repeat
.
•
To exit Voice SVC without dialing, press
Settings
and press
Exit
.
5. The contact information for the name you selected appears
in the display.
•
To dial the number associated with the name, press .
•
To remove this entry from your Contacts list, press
Erase
.
•
To add or change information for this entry, press
Edit
.
•
To access the following options, press
Options
.
–
Send Txt Msg
: Create and send a text message to the selected
Contact.
–
Send Pic Msg
: Create and send a picture message to the selected
Contact.
–
Call
: Dial the number associated with the Contact name.
–
Send Name Card Via Bluetooth
: Send the select Contact’s
information to another Bluetooth device.
Select the desired option.
Quick Search Method
For information on enabling Quick
Search, see “Quick Search” on
page 115.
1. In standby mode and with
Quick Search enabled, press
the first few numeric keys that
correspond to the letters of the
Contact’s name.
Example:
To search for “Sally” you would enter
725
.
2. Press the Up navigation key. A
list of Contact names that
begin with letters
corresponding to the number
keys you pressed appears in
the display.
3. Highlight the searched for
Contact.
•
To call the Contact, press .
•
To view the Contact, press .
Understanding Your Contacts 38
Adding a New Contacts Entry
You can use either of two methods to add an entirely new entry to
Contacts.
Dial Method
1. Using the keypad, enter the number you wish to add to
your Contacts.
2. Press
Save
. The following options appear in the display:
•Create New
: Lets you create a new Contacts entry.
• Update Existing
: Lets you add the number you entered to an
existing Contacts entry.
3. Select
Create New
.
The
Create New
screen appears in the display showing the
following icons:
4. Select the number type that matches your new entry. The
New Contact
screen appears in the display.
5. Use the keypad to enter a name to associate with the
Contacts entry.
6. Press
Save
to save the entry.
Menu Method
1. In standby mode, press Menu, then select
Contacts
➔
Add New Entry
.
The
New Contact
screen appears in the display with the
Name
field highlighted.
2. Enter the name of the new entry using the keypad. (For
more information, refer to “Entering Text” on page 31.)
3. Highlight one of the following fields:
• Mobile
•Home
•Work
•Pager
•Email
•Group
•Ringtone
•Fax
4. Enter a phone number or Email address in the highlighted
field.
5. Repeat steps 3 and 4 as needed.
6. Press to save the new entry.
Mobile
Home
Work
Pager
Fax
39
Editing a Contacts Entry
Editing Contacts Name and Numbers
1. Find the Contacts entry you wish to change. (For more
information, refer to “Finding a Contacts Entry” on
page 35.)
2. Use the Navigation key to highlight the entry and press
View
. The
View Contact
screen appears in the display
showing the highlighted entry’s information.
3. Use the Navigation key to review the information for the
entry that you wish to change, then press
Edit
. The
Edit Contact
screen appears in the display.
4. Use the Navigation key to highlight the particular
information you want to add or change.
•
Press to backspace and delete numbers or letters.
•
Press and hold to clear all numbers or letters in the highlighted
field.
•
Press
Options
.
The following options pop-up in the display:
–
Set Speed Dial
/
Remove speed dial
: Assign/remove a speed dial
number. (For more information, refer to
“Speed Dial”
on page 43.)
–
Set as default
: Set the number the phone will dial when Contacts
dialing or speed dialing.
–
Wait
: A hard pause (waits for input from you).
–
2-Sec Pause
: A 2-second pause after which dialing resumes. (For
more information, refer to
“Add Pauses to Contacts Numbers”
on page 39.)
Select the desired option.
5. When you’re finished changing the Contacts entry:
•
To save your changes, press .
•
To discard your changes, press . You are prompted to confirm
saving your changes before exiting. Press
No
to discard your
changes.
Add Pauses to Contacts Numbers
Calls to automated systems such as banking services often
require a password or account number. Instead of manually
entering these numbers, you can store them in a Contacts entry
with the phone number and with special characters called
pauses, up to a maximum of 32 digits.
•
Wait
: Stops the calling sequence until the phone receives further input.
•
2-Sec Pause
: Stops the calling sequence for two seconds, then sends
the remaining digits.
Note:
You can enter multiple 2-Sec Pauses to extend the length of a pause.
For example, two consecutive 2-Sec Pauses cause a total pause time
of four seconds. Keep in mind that pauses count as digits towards the
32-digit maximum.
Understanding Your Contacts 40
To add pauses to a Contacts entry number, do the following:
1. Find the Contacts entry associated with the number you
want to include one or more pauses. (For more
information, refer to “Finding a Contacts Entry” on
page 35.)
2. Select and edit the desired number. (For more information,
refer to “Editing a Contacts Entry” on page 39.)
3. Press
Options
. The following pause options appear in the
display:
•2-Sec Pause
: A 2-second pause after which dialing resumes.
•Wait
: A hard pause (waits for input from you).
4. Select the pause option of your choice to add it to the
number sequence.
5. When you’re finished entering information, press to
store the number to Contacts.
Pause Dial from Contacts
1. If you stored the number using 2-second pause(s), simply
find the Contacts entry, highlight the number, and press
. (For more information, refer to “Finding a Contacts
Entry” on page 35.)
2. If you stored the number using Wait(s), find and dial the
number from Contacts and wait for the appropriate prompt
from the dialed number.
3. Press to resume dialing the number.
Edit an Existing Email Address
1. Find the Contacts entry you want to edit. (For more
information, refer to “Finding a Contacts Entry” on
page 35.)
2. Highlight the desired Contacts entry, then press
Edit
.
The
Edit Contact
screen appears in the display.
3. Highlight the
Email
field.
4. Use the keypad to edit the Email address. (For more
information, refer to “Entering Text” on page 31.)
5. Press to save your changes.
41
Assigning a Ringtone to a Contacts Entry
When you assign a ringtone to a Contacts entry, the phone plays
the ringtone that you assigned to the entry when you receive a
call from that Contact instead of the ringtone currently assigned
to Voice Calls.
1. Find the Contacts entry you want to edit. (For more
information, refer to “Finding a Contacts Entry” on
page 35.)
2. Highlight the desired Contact, then press
Edit
.
The
Edit Contact
screen appears in the display.
3. Highlight the
Ringtone
field, then press
Set
. The
My
Ringtones
menu appears in the display.
4. Select the ringtone or sound that you wish to assign to the
Contacts entry.
The
Edit Contact
screen re-appears in the display with the
name of the selected file in the Ringtone field.
5. Press to save the ringer assignment to the selected
Contacts entry.
Saving a Number After a Call
Once you finish a call, you can store the caller’s number to your
Contacts list.
Note:
If the call was incoming and Caller ID information was unavailable,
then the
Save
option is also unavailable.
1. Press to end your call. The call time, length of call,
phone number, and name of the party (if available) appear
in the display.
2. Press
Save
. The
Save
menu appears in the display showing
the following options:
•Create New
: Lets you create a new Contacts entry.
• Update Existing
: Lets you add the number you entered to an
existing Contacts entry.
3. Follow the instructions in the upcoming sections
depending on whether the number is a new entry or you
wish to add it to an existing entry.
Understanding Your Contacts 42
Create a New Entry
1. At the
Save
menu, select
Create New
.
The
Create New
screen appears in the display showing the
following number type options:
2. Select the number type that matches your new entry. The
New Contact
screen appears in the display.
3. Enter a name for the new entry. (For more information,
refer to “Entering Text” on page 31.)
4. Press . The new entry is saved to your Contacts list.
Add to an Existing Entry
1. At the
Save
menu, select
Update Existing
. The
Update
Existing
screen appears in the display showing your
Contacts list with the
Go To
field and the first Contacts
entry highlighted.
2. Find the Contacts entry to which you want to add the new
number. (For more information, refer to “Finding a
Contacts Entry” on page 35.)
3. Select the desired Contacts entry. The following number
type options appear in the display:
Number types that are already assigned a number show
the number instead of the number type label.
4. Select the desired unassigned number type. The
Edit
Contact
screen appears in the display with the new
number posted in the appropriate number type field.
5. Press again to save your changes to the existing
entry.
Mobile
Home
Work
Pager
Fax
Mobile
Home
Work
Pager
Fax
43
Speed Dial
A Contacts entry’s Speed Dial number corresponds to the number
keys you press to speed dial one of that entry’s numbers.
Example:
To speed dial the Contacts entry assigned to Speed Dial 5, press
and hold , (1-touch dialing).
To speed dial the Contacts entry assigned to Speed Dial 35, press
then press and hold , (2-touch dialing).
To speed dial the Contacts entry assigned to Speed Dial 235, press
, press , then press and hold , (3-touch dialing).
You can assign one or more Speed Dial numbers to a Contacts
entry during new entry creation or by editing an existing entry.
Assignment During Entry Creation
To assign a Speed Call number to a new Contacts entry number,
do the following:
1. Follow either of the New Contacts entry procedures (see
“Adding a New Contacts Entry” on page 38) until you enter
a name for the entry.
2. After entering the Contacts entry name,
do not press
.
Instead, highlight a number field.
3. Press
Options
. The following options appear in the display:
• Set Speed Dial
: Assign a speed dial number.
• Set as default
: Set the number the phone will dial when Contacts
dialing, speed dialing, or voice dialing.
•Wait
: A hard pause (waits for input from you).
• 2-Sec Pause
: A 2-second pause after which dialing resumes. (For
more information, refer to
“Add Pauses to Contacts
Numbers”
on page 39.)
Select
Set Speed Dial
. The
Speed Dial
screen appears in the
display.
4. Select an Unassigned Speed Dial number or enter an
Unassigned Speed Dial number in the
Go To
field using the
keypad.
Important!:
Do not enter Speed Call numbers 1, 211, 311, 411, 611, or 911.
These numbers are already assigned to Voicemail (001), to
Information (411), to Customer Care (611), and to emergency use
(911).
5. Press
Set
. You are prompted to confirm your Speed
Dial number assignment.
6. Press
Yes
to save your Speed Dial assignment and return
to the
New Contact
screen.
Note:
Press
No
to discard the assignment and return to the
Speed Dial
screen.
7. Press to save your changes.
Understanding Your Contacts 44
Assignment to an Existing Entry
1. Find the Contacts entry you want to edit. (For more
information, refer to “Finding a Contacts Entry” on
page 35.)
2. Highlight the desired entry.
3. Press
Edit
. The
Edit Contact
screen appears in the display.
4. Highlight the number field you wish to assign a Speed Dial
number.
5. Do steps 3 through 7 of “Assignment During Entry
Creation” on page 43.
Changing a Speed Dial Location
1. Find the Contacts entry you want to edit. (For more
information, refer to “Finding a Contacts Entry” on
page 35.)
2. Highlight the desired entry.
3. Press
Edit
. The
Edit Contact
screen appears in the display.
4. Highlight the number field marked by the Speed Dial icon
().
5. Press
Options
. The following options appear in the display:
• Remove speed dial
: Unassign the current speed dial number.
•Set as default
: Set the number the phone will dial when Contacts
dialing, speed dialing, or voice dialing.
•Wait
: A hard pause (waits for input from you).
•2-Sec Pause
: A 2-second pause after which dialing resumes. (For
more information, refer to
“Add Pauses to Contacts
Numbers”
on page 39.)
6. Select
Remove speed dial
. “
Remove speed dial?
” pops up in
the display to confirm your desire to remove the entry.
7. Press
Yes
to remove the Speed Dial assignment. “
Speed
Dial Removed
” pops up in the display, and you are returned
to the
Edit Contact
screen.
8. Do steps 4 through 7 of “Assignment During Entry
Creation” on page 43.
45
Contacts Groups
Contact Groups let you easily send messages to multiple,
selected Contacts. You can also use Groups to find Contact
entries and to add/remove Contacts names in a Group or to
create or rename a Group.
Add Contacts Entry to a Group
Using Add New/Edit Contact Option
To add a Contact to a Group using either the Add New Contact
option or the Edit Contact option, do the following:
1. Create a Contacts entry (see “Adding a New Contacts
Entry” on page 38) or find a Contacts entry (see “Finding a
Contacts Entry” on page 35) that you want to add to a
Group.
2. Highlight the
Group
field, then press
Set
.
The
Select Group
screen appears in the display showing
Groups similar to the following:
• No Groups
•Business
• Colleague
• Family
• Friends
3. Select the Group to which you want to assign the selected
Contact.
You are returned to the
New Contact
/
Edit Contact
screen
and the selected Group name populates the
Group
field.
4. Press to save your changes.
Using Group Add Option
The Add option lets you add one or more existing Contacts to a
Group.
1. In standby mode, press Menu, then select
Contacts
➔
Group
.
The
Group List
screen appears in the display showing
Groups similar to the following:
• No Groups
•Business
• Colleague
• Family
• Friends
2. Highlight a Group, then press
Options
. The following
options popup in the display:
• Send Txt Msg
: Send a text message to the selected Group.
• Send Pic Msg
: Send a picture message to the selected Group.
•Rename
: Change the name of the selected Group.
Understanding Your Contacts 46
•Erase
: Delete the selected Group, and send the Contacts back to
No Group.
•Add
: Add one or more Contacts to the selected Group.
3. Select
Add
. The
Add Contacts
screen appears in the display
showing a list of Contacts entries.
4. Do one of the following:
•
Use the Navigation key to highlight an entry you want to add to the
group, then press
Mark
. A check mark appears in the entry’s
check box.
Repeat as needed to check all the desired Contacts.
•
Press
Options
, then select
Mark All
.
Note:
To unmark a marked Contact, highlight the Contact and press
Mark
to clear the check mark.
5. When you have marked the Contacts you want to add to
the group, press
Done
. “
Contact added to group
” appears in
the display, followed by the selected Group list including
the added Contacts.
Remove Contacts Entry from a Group
1. In standby mode, press Menu, then select
Contacts
➔
Group
. The
Group List
screen appears in the display.
2. Highlight the Group (other than No Group) from which you
want to remove a Contact, then press
View
.
A list of the Contacts assigned to the selected Group
appears in the display.
3. Highlight the Contact you wish to remove.
4. Press
Remove
. You are prompted to confirm the removal of
the selected Contact.
5. To remove the selected Contact from this Group and return
it to No Group, press
Yes
.
To keep the selected Contact in this Group, press
No
.
47
Rename a Group
The Rename option lets you change the name any of the Groups,
except No Group.
1. In standby mode, press Menu, then select
Contacts
➔
Group
. The
Group List
screen appears in the display.
2. Highlight the Group name other than No Group that you
wish to change, then press
Options
➔
Rename
.
The
Rename Group
screen appears in the display.
3. Enter changes to the group name using the keypad. (For
more information, refer to “Entering Text” on page 31.)
4. When you have completed your changes to the Group
name, press
Save
.
“
Group Renamed
” appears in the display followed by the
Group List
screen showing your renamed Group.
Add a New Group
The New option lets you add Groups.
1. In standby mode, press Menu, then select
Contacts
➔
Group
. The
Group List
screen appears in the display.
2. Press
New
. The
New Group
screen appears in the display.
3. Enter a new group name using the keypad. (For more
information, refer to “Entering Text” on page 31.)
4. When you have completed entering the new Group name,
press
Save
. “
Group Saved
” appears in the display
followed by the
Group List
screen showing your new
Group.
Erase a Group
The
Erase
option lets you delete a Group, thus freeing you to
reassign the Contacts formerly in the Group.
1. In standby mode, press Menu, then select
Contacts
➔
Group
. The
Group List
screen appears in the display.
2. Highlight the Group that you wish to delete, press
Options
,
then select
Erase
.
You are prompted to confirm the Group erasure.
3. To confirm erasure of the Group, press
Yes
. To retain the
Group, press
No
.
Deleting a Contacts Entry
1. Find the Contacts entry you want to delete. (For more
information, refer to “Finding a Contacts Entry” on
page 35.)
2. Highlight the desired entry, press
Options
, then select
Erase
. The phone prompts you to confirm the erasure.
3. To confirm erasure of the selected Contact, press
Yes
. To
retain the Contact, press
No
.
Understanding Your Contacts 48
Memory Info
The Memory Info menu option lets you view the amount of
memory you have used to store Contacts entries, as well as the
memory remaining to store more Contacts entries.
䊳
In standby mode, press Menu, then select
Contacts
➔
Memory Info
.
The
Memory Info Contacts
screen appears in the display
showing the
Total
amount of memory in your phone, the
amount of memory
Used
to store Contacts entries, and the
remaining (
Free
) for Contacts entries.
49
Section 6: Messaging
This section explains how to send or receive different types of
messages. This section also describes the features and
functionality associated with messaging.
Types of Messages
Your phone is able to send and receive Text messages to
compatible phones and devices. Text messages can be up to 150
characters in length.
Note:
Available memory is shared between all messages. You can store up to
100 messages. However, the exact number is dependent upon
message length.
Create and Send Text Messages
Menu Method
1. In standby mode, press the Navigation key Up, then select
Send Message
➔
Text Message
. The
Create Txt Msg
screen
appears in the display showing the
To:
list.
Tip:
To launch the
Create Txt Msg
screen using a voice command — In
standby mode, press and hold until the phone prompts, “
Say a
command.
” Say “
Send Text
” into the microphone. You are then prompted
to say a Contact name or a number for the first recipient of the
message.
2. Enter the phone number or Email address of the recipient,
or press
Add
and select a Contact entry, a Contacts Group,
or the originator or recipient of a recent call, then press
. The
Text:
field appears in the display.
3. Enter the text content of your message using the keypad.
(For more information, refer to “Entering Text” on
page 31.)
4. Press
Options
to complete the message text and set
message send options. The following options appear in the
display:
• Add Preset Msg
: Insert pre-composed text in your message.
Messaging 50
•Save As Draft
: Save the message to your Draft folder.
• Save As Preset
: Save the text in this message as a new pre-
composed message text.
• Add To Contacts
: Save the recipient’s number or Email address as
a Contacts list entry.
• Delivery
: The following options are available.
–
Enh. Delivery Ack
: Choose
On
or
Off
— Requests confirmation when
your message is received.
–
Priority
: Choose
Urgent
or
Normal
.
–
CB #
: Choose On or Off to include or exclude your phone number with
this message.
–
Signature
: Choose
None
or
Custom
to add a text signature to this
message.
• Cancel Msg
: End composition of this message. You are prompted
to choose whether to save this message to your Drafts folder.
5. Once you’re finished entering your message, press
Send
.
Chat Method
Using the chat method, you can quickly and easily send a new
message to a Contact or number with whom you’ve already
exchanged messages.
1. In standby mode, press the Navigation key Up, then select
Inbox
. A list of your stored incoming messages appears.
2. Select a message from the person you wish to contact.
The
Chat with...
screen appears in the display, showing the
text of your previous message exchanges. (For more
information, refer to “Chat View” on page 53.)
3. Press
Reply
, then select
Text Message
. The
Reply – Txt Msg
screen appears in the display.
4. Enter the text content of your message using the keypad.
(For more information, refer to “Entering Text” on
page 31.)
5. Press
Options
to complete the message text and set
message send options. The following options appear in the
display:
• Add Preset Msg
: Insert pre-composed text in your message.
•Save As Draft
: Save the message to your Draft folder.
• Save As Preset
: Save the text in this message as a new pre-
composed message text.
• Add To Contacts
: Save the recipient’s number or Email address as
a Contacts list entry.
51
• Delivery.
: The following options are available.
–
Enh. Delivery Ack
: Choose
On
or
Off
— Requests confirmation when
your message is received.
–
Priority
: Choose
Urgent
or
Normal
.
–
CB #
: Choose On or Off to include or exclude your phone number with
this message.
–
Signature
: Choose
None
or
Custom
to add a text signature to this
message.
•Cancel Msg
: End composition of this message. You are prompted
to choose whether to save this message to your Drafts folder.
6. Once you’re finished entering your message, press
Send
.
Receive Text Messages
When you receive a message in standby mode, the ringer sounds
(unless turned off) and
New Message
appears in the display along
with the closed envelope icon ( ). The date and time of the
message also appear in the display along with the following
options:
•
View Now
: Opens the message, where you have the option to
Forward, Reply With Copy, Save as Preset, Lock, Add To Contacts,
Message Info, or Extract.
•
View Later
: Saves the message to your Inbox, where you can view it
later, then returns your phone to standby mode.
Select your choice.
Receive Messages While in a Call
When you receive a message while in a call, New Message
appears in the display along with the closed envelope icon ( ).
The date and time of the message also appear in the display
along with the following options:
•
View Now
: Opens the message, where you have the option to
Forward, Reply With Copy, Save as Preset, Lock, Add To Contacts,
Message Info, or Extract.
•
View Later
: Saves the message to your Inbox, where you can view it
later, and returns your phone to call mode.
Select the desired option.
Messaging 52
View a Text Message Now
1. After you select the
View Now
option, the new text
message appears in the display in Chat View. (For more
information, refer to “Chat View” on page 53.).
2. While viewing your message press
Options
. The following
options appear in the display:
•Forward
: Send a copy of this message to another recipient.
• Reply With Copy
: Compose and send a reply message to the
originator of the received message and include a copy of the
original message.
• Save As Preset
: Save the text in this message as a new pre-
composed message text.
•Lock
/
Unlock
: Block/permit erasure of the highlighted message.
• Add To Contacts
: Save the sender’s number to your Contacts.
• Message Info
: Shows message delivery status, addressee, size,
and so on.
•Extract
: Lets you call the originator of the highlighted message.
3. Select an option to perform its function.
Note:
For more information on received message options, see “Inbox” on
page 58.
View a Text Message Later
1. In standby mode, press the Navigation key Up, then select
Inbox
. The
Inbox
screen appears in the display.
2. Select the new message. The new text message appears
in the display in Chat View. (For more information, refer to
“Chat View” on page 53.)
53
Chat View
Chat View mode is the default format
for viewing text messages. In Chat
View mode, you can view a series of
text messages exchanged between
your phone and another phone as if
the messages were a chat session,
instead of viewing only the incoming
messages individually.
Note:
To disable/enable Chat View mode, change the
Message View
setting.
(For more information, refer to “Message Settings” on page 64.)
Tip:
To simplify the exchange of messages with
Message View
setting to
Chat
, you might want to change the
Auto Save
setting to
On
.
The following icons indicate which responses are incoming and
outgoing:
Incoming Message
Outgoing Message
Send Picture Messages in Camera Mode
Picture messages can be sent to recipients with compatible
phones or devices. You can even accompany a Picture message
with a voice memo or preloaded sound.
Tip:
You can send a Picture message to up to ten recipients. Enter each
recipient’s address or phone number in a separate
Send to
field of the
Picture message composer.
1. In standby mode, press and hold the Camera key ( ).
The camera viewfinder screen appears in the display.
2. Using the display as a viewfinder, when the image that you
wish to send appears in the display, press
Take
to
take a picture.
Note:
For more information about using the camera feature in your phone,
see “Camera” on page 68.
3. Press
Send
to save the picture and begin the picture
message delivery process. The
Create Pic Msg
screen then
appears in the display with the
Send To
list highlighted.
4. Enter the phone number or Email address of the recipient
of the Picture message, then press .
Tip:
Press
Add
to display a pop-up menu containing:
Contacts
,
Groups
,and
Recent Calls
. These options allow you to find and add recipients to the
Send To:
list.
Messaging 54
5. The
Subject
field appears in the display. Enter a subject for
the Picture message using the keypad. (For more
information, refer to “Entering Text” on page 31.)
6. Press the Navigation key Down until the
Text
field is
highlighted, then enter the message text using the keypad.
(For more information, refer to “Entering Text” on
page 31.)
7. Your new picture appears in the
Picture
field.
8. If you wish to insert a sound into your Picture message,
highlight the
Sound
field and do the following; otherwise,
proceed to step 10.
•
Press
Sound
. The
My Ringtones
screen appears in the display
showing the following options:
–
Record New
: Record a new memo to insert into the message.
Note:
You can record and insert a voice memo of up to 60 seconds in length,
if you record first before attaching a picture. If a picture is attached
before recording, the size of the voice memo is limited to the amount
of remaining memory.
–
Audio files list: Select from the list of previously recorded voice memos
and preloaded audio files on your phone.
Select an option, a sound file, and insert the sound into your message.
To exit the pop-up menu without inserting a sound, press .
9. Press
Options
to complete the message text and set
message send options. The following options appear in the
display:
•
Preview
: View the picture as the recipient will see it.
•
Add Preset Msg
: Insert pre-composed text in your message.
•
Save As Draft
: Save the message to your Draft folder.
•
Priority
Level
: Choose
High
,
Normal
, or
Low
.
•
Validity Period
: Enter the
Date
when this message will cease to be
valid, then use the Left and Right navigation keys to choose the
Time
.
•
Delivery Ack
: Choose
On
or
Off
— Requests confirmation when
your message is received.
•
Remove Pic
: Remove the picture from your message.
•
Remove Sound
: Remove the sound file from your message.
•
Add To Contacts
: Save the recipient’s number or Email address as
a Contacts list entry.
Select the desired option.
10. Press to send the message. “
Sending Message
”
appears in the display and a progress bar indicates the
send status.
55
Send Picture Messages in Standby Mode
Send Picture messages to recipients with a compatible phone or
other device, and accompany the Picture message with a voice
memo, ring tone, or downloaded melody.
Tip:
You can send a Picture message to up to ten recipients. Enter each
recipient’s address or phone number in a separate
Send To
field of the
Picture message composer.
1. In standby mode, press the Navigation key Up, then select
Send Message
➔
Picture Message
.
The
Create Pic Msg
screen then appears in the display
showing the
Send To
list.
Tip:
To launch the
Create Pic Msg
screen using a voice command — In
standby mode, press and hold until the phone prompts, “
Say a
command.
” Say “
Send Picture
” into the microphone. You are then
prompted to say a Contact name or a number for the first recipient of the
message.
2. Enter the phone number or Email address of the recipient
using the keypad, then press .
Tip:
Press
Add
to display a pop-up menu containing:
Contacts
,
Groups
, and
Recent Calls
. These options allow you to find and add recipients to the
Send To
list.
3. The
Subject
field appears in the display. Enter a subject for
the Picture message using the keypad. (For more
information, refer to “Entering Text” on page 31.)
4. Press the Navigation key Down until the
Text
field is
highlighted, then enter the message text using the keypad.
(For more information, refer to “Entering Text” on
page 31.)
5. Press the Down navigation key until the
Picture
field is
highlighted, then press
Picture
. A photo gallery of
thumbnail images appears in the display.
6. Highlight a picture to be added to your message, then do
the following:
•
If you want, press
View
to expand the highlighted picture to full-
screen size.
•
If you want to include a new picture, press
Camera
.
Note:
For more information about using the camera feature in your phone,
see “Camera” on page 68.
•
Press to add the highlighted picture to your message.
You are returned to the
Create Pic Msg
screen with the
selected picture in the
Picture
field.
7. If you wish to insert a sound into your Picture message,
use the Down navigation key to highlight the Sound: field
and do the following; otherwise, proceed to step 8.
Messaging 56
•
Press
Sound
. The
My Ringtones
screen appears in the display
showing the following options:
–
Record New
: Record a new memo to insert into the message.
Note:
You can record and insert a voice memo of up to 60 seconds in length,
if you record first before attaching a picture. If a picture is attached
before recording, the size of the voice memo is limited to the amount
of remaining memory.
–
Audio files list
: Select from the list of previously recorded voice
memos and preloaded audio files on your phone.
Select an option, a sound file, and insert the sound into your message.
To exit the pop-up menu without inserting a sound, press .
8. Press Options to complete the message text and set
message send options. The following options appear in the
display:
•Preview
: View the picture as the recipient will see it.
• Add Preset Msg
: Add precomposed text to your message.
•Save As Draft
: Save the message to your Draft folder.
•
Priority
Level
: Choose
High
,
Normal
, or
Low
.
• Validity Period
: Enter the
Date
when this message will cease to be
valid, then use the Left and Right navigation keys to choose the
Time
.
• Delivery Ack
: Choose
On
or
Off
— Requests confirmation when
your message is received.
• Remove Pic
: Remove the picture from your message.
• Remove Sound
: Remove the sound file from your message.
• Add To Contacts
: Save the recipient’s number or Email address as
a Contacts list entry.
Select an option to invoke its function.
9. Press to send the message. “
Sending Message
”
appears in the display and a progress bar indicates the
send status.
57
Receive Picture Messages
When you receive a Picture Message in standby mode, the ringer
sounds (unless turned off) and
New Message
appears in the
display along with the closed envelope icon ( ).
The date and time of the message also appear in the display
along with the following options:
•
View Now
: Retrieves and opens the message, where you have the
option to Reply, Forward, Delete, Save Text, Save Pic, or Save Msg.
•
View Later
: Saves the message to your inbox, where you can view it
later, then returns your phone to standby mode.
Select the desired option.
View a Picture Message Later
1. In standby mode, press the Navigation key Up, then select
Inbox
. The Inbox appears in the display.
2. If the new picture message is not highlighted, select the
new message. “
Connecting
” appears in the display
followed by “
Receiving Message
” and a progress bar
indicating that the message is downloading to your phone.
3. Once a Picture message has been downloaded to your
phone, the new Picture message appears in the display. If
the message includes a sound file, the phone begins
playing it.
Note:
For more information on viewing and managing received picture
messages, see “Inbox” on page 58.
View a Picture Message Now
1. After you select the
View Now
option, “
Connecting
”
appears in the display followed by “
Receiving Message
”
and a progress bar indicating that the message is
downloading to your phone.
2. After the Picture message has downloaded, an alert
sounds, and the new Picture message appears in the
display. If the message includes a sound file, the phone
begins playing it.
3. While viewing your message press
Options
. The following
options appear in the display:
•Play Again
: Play the sound file included in the picture message
again.
•Forward
: Send a copy of this message to another recipient.
•Erase
: Remove this message from the folder.
•Lock
/
Unlock
: Block/permit erasure of the highlighted message.
•Save Pic
: Save the picture included in this message to the My
Images folder.
• Save Sound
: Save the sound file included in this message to the
My Sounds folder.
Messaging 58
• Save As Preset
: Save the text in this message as a new pre-
composed message text.
• Add To Contacts
: Save the sender’s number to your Contacts.
• Message Info
: Shows message delivery status, addressee, size,
and so on.
•Extract
: Calls the sender of the received message.
4. Select an option to invoke its function.
Note:
For more information on received picture message options, see
“Inbox” on page 58.
Message Boxes
Your phone stores messages in any one of five message boxes.
The subsections that follow describe each message box in detail.
Inbox
Received messages of all types (except Voicemail) are stored in
the Inbox.
1. In standby mode, press the Navigation key Up, then select
Inbox
. A list of incoming messages appears in the display.
Tip:
While in a call, press
Options
, then select
Messages
to open the
Messages
menu.
2. Select the message that you wish to view. The contents of
the highlighted message appear in the display.
3. While viewing your message press
Options
. The following
options appear in the display:
•Chat view:
–
View Last Message
: Displays the most recent message exchanged
with this sender/addressee in Normal mode.
–
Add To Contacts
: Save the sender’s number to your Contacts.
• Normal view:
–
Forward
: Send a copy of this message to another recipient.
–
Erase
: (Picture Msg only) Remove this message from the Inbox.
–
Reply With Copy
: (Text Msg only) Compose and send a reply message
to the originator of the received message and include a copy of the
original message.
–
Save As Preset
: Save the text in this message as a new pre-
composed message text.
–
Lock
/
Unlock
: Block/permit erasure of the highlighted message.
–
Add To Contacts
: Save the sender’s number to your Contacts.
–
Message Info
: Shows message delivery status, addressee, size, and
so on.
–
Extract
: Calls the sender of the received message.
4. Select an option to invoke its function.
59
Managing Inbox Messages
1. In standby mode, press the Navigation key Up, then select
Inbox
. A list of incoming messages appears in the display.
2. Highlight a message in the list.
3. Press
Erase
to remove the highlighted message from the
Inbox.
4. To access other options, press
Options
. The following
options appear in the display:
•Reply
: Compose and send a reply message to the originator of the
received message.
• Reply With Copy
: Compose and send a reply message to the
originator of the received message and include a copy of the
original message.
•Forward
: Send a copy of this message to another recipient.
•Lock
/
Unlock
: Block/permit erasure of the highlighted message.
• Add To Contacts
: Save the sender’s number to your Contacts.
• Erase Inbox
: Delete all unlocked messages from the Inbox.
•Message Info
: Shows message delivery status, addressee, size,
and so on.
5. Select an option to perform its function.
Outbox
Your phone stores messages in the Outbox, regardless of
whether the message was successfully transmitted. Verify if and
when a message or Email was successfully received by enabling
the Delivery Ack feature.
Review Messages in the Outbox
1. In standby mode, press the Navigation key Up, then select
Outbox
. Your list of sent messages appear in the display.
2. Highlight a message that you wish to review, then press
Open
.
3. While viewing your message, press
Options
. The following
options appear in the display:
•Play Again
: (Picture message only) Repeats playback of a sound
file attached to this message.
•Forward
: Send the highlighted message to another recipient.
•Erase
: (Picture message only) Remove this message from the
Outbox folder.
•Lock
/
Unlock
: Block/permit erasure of the highlighted message.
• Save As Preset
: Save the text in this message as a new pre-
composed message text.
• Add To Contacts
: Save the recipient’s number to your Contacts.
•Message Info
: Shows message delivery status, addressee, size,
and so on.
Messaging 60
•Extract
: Calls recipient of this message.
4. Select an option to perform its function.
Messages and Lock Mode
Your phone can still receive messages while in Lock Mode. The
time and date of the message appear in the display, but you
cannot access the message until you enter the lock code.
Managing Outbox Messages
1. In standby mode, press the Navigation key Up, then select
Outbox
. Your list of sent messages appear in the display.
2. Highlight a message, then press
Erase
to remove the
highlighted message from the Outbox.
3. Press
Options
. The following options appear in the display:
•Forward
: Send the highlighted message to another recipient.
• Resend
: Re-send the highlighted message to the original recipient.
•Lock
/
Unlock
: Block/permit erasure of the highlighted message.
• Add To Contacts
: Save the recipient’s number to your Contacts.
•Erase Outbox
: Delete all unlocked messages from the Outbox.
• Message Info
: Shows message delivery status, addressee, size,
and so on.
4. Select an option to perform its function.
Draft Box
Messages in the Draft Box are those that have been composed
but never sent. You can return to the Draft Box at any time to
view, edit, or send a draft message.
Create a Draft Message
1. In standby mode, press the Navigation key Up, then select
Send Message
➔
Text Message
. The
Create Text Msg
screen
screen appears in the display showing the
To:
list.
2. Enter the phone Number or Email address of a recipient,
then press .
3. Compose your message using the keypad, then press
Options
and select
Save As Draft
. A confirmation message
appears in the display and your message is saved to the
Drafts box.
61
View and Edit Draft Messages
1. In standby mode, press the Navigation key Up, then select
Drafts
. A list of any draft messages that you’ve saved
appears in the display.
2. Highlight a message that you wish to view or edit, then
press
Edit
. The message creation screen appears in
the display.
3. Enter or change the recipient’s number and/or Email
address, message subject, and the message text using the
keypad. (For more information, refer to “Entering Text” on
page 31.)
4. Press
Options
to complete the message and set message
send options. The following options appear in the display:
•Preview
: (Picture message only) View your message as a recipient
will see it.
• Add Preset Msg
: Add precomposed text to your message.
• Save As Draft
: Save the message to your Drafts box.
• Save As Preset
: Save the text in this message as a new pre-
composed message text.
• Priority Level
: (Picture message only) Choose
High
,
Normal
, or
Low
.
•Validity Period
: (Picture message only) Set the date and time when
this message is no longer valid and should not be delivered.
• Delivery Ack
: (Picture message only) Choose
On
or
Off
—
Requests confirmation when your message is received.
• Remove Pic
: (Picture message only) Remove the picture from this
message
• Remove Sound
: (Picture message only) Remove the sound file
from this message.
• Add To Contacts
: Save the recipient’s number or Email address to
your Contacts.
• Delivery
: The following options are available.
–
Enh. Delivery Ack
: Choose
On
or
Off
— Requests confirmation when
your message is received.
–
Priority Level
: Choose
Urgent
or
Normal
.
–
CB #
: Choose On or Off to include or exclude your phone number with
this message.
–
Signature
: Choose
None
or
Custom
to add a text signature to this
message.
• Cancel Msg
: End composition of this message. You are prompted
to choose whether to save this message to your Drafts folder.
5. Select an option to perform its function.
6. When you have completed composing your message,
press
Send
.
Messaging 62
Managing Draft Messages
1. In standby mode, press the Navigation key Up, then select
Drafts
. A list of any draft messages that you’ve composed
appears in the display.
2. Highlight a message.
3. To remove the highlighted message from the Drafts box,
press
Erase
. You are prompted to confirm erasure of the
highlighted draft message.
•
To erase this draft message, press
Yes
.
•
To keep this draft message in your Drafts box, press
No
.
4. For other options, press
Options
. The following options
appear in the display:
•Send
: Send the highlighted message to the original recipient, if the
recipient’s number and/or Email address is included with the draft
message.
•Lock
/
Unlock
: Block/permit erasure of the highlighted message.
• Add To Contacts
: Save the recipient’s number and/or Email
address to your Contacts.
• Save As Preset
: Save the text in this message as a new pre-
composed message text.
• Erase Drafts
: Delete all unlocked draft messages.
5. Select an option to perform its function.
Voicemail
New messages in your voice mailbox are indicated by the
voicemail icon ( ) and are logged in the Voicemail box of the
Messages menu. Open the Voicemail box to view the Callback #
(if available), Urgency, and other details of the Voicemail
message.
Listen to Voicemail Now
Once you’ve received a new voicemail message, you have the
option to either:
•
Listen Now
: Calls your voice mailbox and allows you to listen to your
messages.
•
Listen Later
: Returns you to standby mode where you can later
choose to call your mailbox and review your messages.
Select an option to perform its function.
63
Listen to Voicemail Later
If you choose to review your voicemail messages at a later time:
1. In standby mode, press the Navigation key Up, then select
Voicemail
. The
Voicemail
screen appears in the display,
showing the number of new voicemail messages received
and the date and time the latest message was received.
2. Highlight a voice message.
3. Press or to call your voice mailbox and listen to
the message.
Note:
You can also press and hold to dial your voice mailbox.
Erase Messages
Using Erase Messages, you can erase all of the messages in
each of your boxes from one convenient location.
Note:
This function erases all messages in a selected box. To delete a single
message, open the box from the
Messages
menu, highlight a message,
open the message if you want, then press
Erase
to delete it.
1. In standby mode, press the Navigation key Up, then select
Erase Messages
.
The following options appear in the display:
• Inbox
: Deletes all unlocked messages stored in the Inbox.
• Outbox
: Deletes all unlocked messages stored in the Outbox.
• Drafts
: Deletes all unlocked messages stored in the Drafts box.
• All Messages
: Deletes all unlocked messages stored in all of the
message boxes, except Voicemail.
2. Select the messages that you wish to delete. You’re
prompted to confirm the erasure of all messages in the
selected box or in all boxes.
3. To delete the messages, press
Yes
. To cancel deleting the
messages, press
No
.
Messaging 64
Message Settings
Use the
Msg Settings
sub-menus to define general settings and
text message settings.
1. In standby mode, press the Navigation key Up, then press
Msg Settings
. The following options appear in the display:
• Notification
: Choose whether your phone shows the message and
the new message icon (
Msg. & Icon
) or shows the the new
message icon only (
Icon only
).
•Auto Save
: Choose whether your messages are saved
automatically when you exit them (
Auto Save
,
Do not Save
,
Prompt
).
• Auto Erase
: Choose to receive (
On
) or not receive (
Off
) a warning
message when you delete a message.
•Auto View
: Choose to automatically view new messages when
they are received (
On
) or access new message content later in the
Inbox folder (
Off
).
• Entry Mode
: Choose the default method for entering text into
messages (
T9 Word
,
Abc
,
123
).
•CB #
: Choose whether to include a callback phone number with
your outgoing messages, and enter the number to be included.
•VM#
: Edit or view your Voicemail number.
• Signature
: Choose whether to include a text signature in outgoing
message text, and enter the text to be included.
•Preset Msgs
: Edit your pre-composed messages, which can then
be inserted into new messages.
•Auto Scroll
: Choose to automatically scroll through new message
content when received (
On
) or manually scroll through it (
Off
).
• Messaging Font Size
: Select
Large
or
Normal
text.
• Message View
: Choose whether to view text messages as a
Chat
session or individually (
Normal
).
2. Select the desired option to enter the highlighted option’s
sub-menu.
65
Editing and Entering Preset Messages
1. In standby mode, press the Navigation key Up, then select
Msg Settings
➔
Preset Msgs
. The
Preset Msgs
sub-menu
appears in the display.
2. To create a new Preset Message:
•
Press
New
.
Tip:
You can also create a new Preset Message by viewing/editing an Outbox
or Drafts message and using the
Save As Preset
option in the
Options
menu. (For more information, refer to “Review Messages in the Outbox”
on page 59)
•
Enter/change the text content of your Preset Message using the
keypad. (For more information, refer to
“Entering Text”
on
page 31.)
•
Once you’re finished entering your Preset Message, press
OK
. The
Preset Msgs
menu appears in the display with your new Preset
Message highlighted.
3. To change a Preset Message:
•
Highlight a Preset Message you want to change, then press
Edit
.
(You cannot change the pre-defined Preset Messages included with
your phone.)
Note:
You cannot change or erase pre-loaded Preset Messages.
•
Enter/change the text content of your Preset Message using the
keypad. (For more information, refer to
“Entering Text”
on
page 31.)
4. To erase a Preset Message:
•
Highlight a Preset Message you want to erase, then press
Erase
.
You are prompted to confirm erasure of the highlighted Preset
Message.
•
To erase the highlighted Preset Message, press
Yes
. To keep it,
press
No
.
Games & Apps 66
Section 7: Games & Apps
With Games & Apps, you can download multimedia,
applications, games, and check news and sports.
Accessing Games and Apps
With Games and Apps, you can
download full featured applications
over the air including games,
personalized ring tones, pictures, and
more.
䊳
In standby mode, press
Menu, then select
Games &
Apps
. The
Games & Apps
screen appears in the display.
The
Games & Apps
icon lets
you locate, purchase (when required), and download an
application, ringtone, or other multimedia files.
Launching an Application
1. In the
Games & Apps
screen,
select
Games & Apps
.
The
Games & Apps
menu
appears, listing any
applications (apps) you have
downloaded.
2. Highlight the application you
wish to run, then press .
67
Finding and Downloading Applications
1. In the
Games & Apps
screen,
select
Games & Apps
.
The
Games & Apps
menu
appears.
2. Select
Catalog
.
3. Follow the prompts to locate,
purchase (when required), and
download an application, a
ringtone, or other multimedia
files.
Camera 68
Section 8: Camera
Use your R261 phone to take full color digital pictures, display
them on your phone’s vivid color display, and instantly share
them with family and friends. It’s fun, and as easy to use as a
traditional point-and-click camera. This section explains how you
can do the following:
•
Take pictures with your phone’s built-in digital camera.
•
Send your pictures to others in Picture messages.
•
Set the several options associated with the camera that help you take
crisp, clear pictures.
Taking Pictures
Taking pictures with the
built-in camera is as
simple as launching the
camera, choosing a
subject, pointing the
lens (located on the
front of your phone’s
flip, near the hinge), and
pressing a button.
Taking Snap Shots (Single Pictures)
To take a single picture using the current camera settings, do the
following:
1. In standby mode, press and hold the Camera key ( )
on the right side of the phone. The message “
Please,
Wait...
” appears in the display followed by a camera view
finder screen. (For more information, refer to “Camera
Screen Layout” on page 71)
Note:
You can also activate the camera by pressing Menu, then
selecting Multimedia ➔ Camera.
2. Using the display as a
viewfinder, point the camera
lens (on the front of the flip,
near the hinge) at your subject.
3. When the image that you wish
to capture appears in the
display, press
Take
.
4. To save the picture to memory,
press
Save
.
To erase the photo, press
Cancel
.
Camera
Lens
69
Tip:
You can change a number of the camera’s settings to suit particular
uses for your pictures. See “Camera Options” on page 73 for more
information.
Taking Multi Shot Pictures
When taking pictures of moving subjects or subjects you cannot
pose, such as children and pets, the camera’s Multi Shot mode
simplifies the process of taking multiple pictures in quick
succession. After taking Multi Shot pictures, the camera
automatically displays thumbnail views of the pictures you have
just taken so you can select the best picture(s) and discard the
rest.
1. In standby mode, press and hold the Camera key ( )
on the right side of the phone. The message “
Please,
Wait...
” appears in the display followed by a camera view
finder screen. Your phone is now in camera mode. (For
more information, refer to “Camera Screen Layout” on
page 71)
Note:
You can also activate the camera by pressing Menu, then
selecting Multimedia ➔ Camera.
2. Press Options. The options
menu bar appears at the top of
the camera screen.
3. Highlight the Shot Type icon
( , , , or ).
The following Shot Type
options appear in the display:
•
Single Shot
: : Lets you take
1 photo at a time.
•
Series Shot
: : Lets you take
a series of 5 separate photos.
•
Mosaic Shot
: : Lets you take a
2x2
or
3x3
mosaic photo of 4
or 9 shots.
•
Frame Shot
: : Lets you select a colorful frame to include
around your photos.
4. Select
Series Shot
or
Mosaic Shot
.
•
When you select
Series Shot
, you can take 5 photos in quick
succession by pressing
Take
.
•
When you select
Mosaic Shot
, the following options appear in the
display:
–
Off
–
2x2
: Lets you take 4 shots automatically that are combined into a
single, mosaic photo, all with one press of
Take
.
–
3x3
: Lets you take 9 shots automatically that are combined into a
single, mosaic photo, all with one press of
Take
.
Camera 70
5. Select the desired setting.
A Series Shot progress bar ( ) or
a Mosaic Shot icon ( ) (which acts as a progress bar
while pictures are being taken) appears in the display.
6. Using the display as a viewfinder, point the camera lens at
your subject.
7. When the image that you wish to capture appears in the
display, press
Take
. The camera takes one picture
(Single Shot or
Frame Shot
) or multiple pictures in quick
succession (Series Shot or Mosaic Shot), then the Series
Shot Select to Save screen or the Mosaic Shot mosaic
photo screen appears in the display.
•Series Shot:
–
To save the pictures to memory,
press
Done
.
–
To select/unselect pictures for
erasure, press
Mark
/
Unmark
.
–
To discard the pictures, press
Erase
.
•
Mosaic Shot:
–
To save the picture to memory,
press
Save
.
–
To send the picture in a picture
message, press
Send
( ).
–
To discard the picture, press
Cancel
.
71
Camera Screen Layout
When you activate your phone’s
camera, the top two lines of the
display are reserved for camera icons
(when active). The center of the
display shows a viewfinder image of
the subject at which the camera is
pointed.
Camera Screen Soft Keys
The soft key labels on the bottom line of the display change to
the following:
•
Gallery
: Pressing the Left soft key opens the
My Images
multimedia
folder so you can view or manage your stored pictures. (See
“Gallery”
on page 78 for more information.)
•
Take
: Pressing takes a picture of the subject currently appearing
in the camera view finder screen.
•
Options
: Pressing the Right soft key opens a menu bar of camera
options and settings.
Camera Screen Icons
Single Shot in use: Takes one photo each time you
press
Take
.
Series Shot in use: Takes a series
( ) of photos automatically or
manually when you press
Take
. The number of
photos taken depends upon the Series Shot setting.
Mosaic Shot in use: Takes multiple shots individually
when you press
Take
. The number of shots taken
depends upon the Divided Shot setting. All shots are
combined into a single, mosaic photo.
Frame Shot in use: Takes one photo each time you
press
Take
. Each photo is surrounded by a
selected, colorful frame.
Camera Resolution: Indicates camera’s current
resolution setting. (You can change the camera resolution
setting. For more information, refer to “Camera Options”
on page 73.)
Night Shot: Lets you take photos in low light.
Self Timer in use: Delays the camera shutter for 2,
5, or 10 seconds after you press .
Camera 72
Quality: Indicates camera’s picture quality setting. (You
can change the picture quality setting. For more
information, refer to “Quality” on page 75.)
White Balance: Indicates camera’s white balance
setting. (You can change the camera white balance
setting. For more information, refer to “White Balance”
on page 75.)
Photo Limit: Indicates the available number of photos
you can take. (Depending on the camera resolution
setting.)
Zoom: Enlarges the image from X0 to X7 before you
take a picture. (Depending on the camera resolution
setting. For more information, refer to “Zoom” on
page 78.)
Brightness: Brightens or darkens the image from -4
to +4 before you take a picture. (For more
information, refer to “Brightness” on page 78.)
Picture Options
After you take a picture, the following options are available (if
Auto Save
is set to
Off
):
•
Save the picture
by pressing
Save
.
Pictures are stored in the
My Images
folder, which is part of the
phone’s memory and/or card memory devoted to storing, browsing,
and viewing saved pictures. (See
“Gallery”
on page 78 for more
information.)
•
Send the picture
to someone else by pressing
Send
.
For a detailed procedure, see
“Send Picture Messages in Camera
Mode”
on page 53
•
Discard the picture
by pressing
Cancel
.
If
Auto Save
is set to
On
, these options are not available. After
pressing
Take
, the picture(s) is (are) automatically saved,
and you are returned to the camera screen.
73
Camera Options
The Camera Options let you temporarily adjust default camera
settings to suit available lighting, the subject of the photo, or the
purpose of the photo, for the current camera session. When you
exit the camera, your Camera Options values revert to their
default values.
To access Camera Options, do the following:
1. In camera mode, press Options. The Camera Options
menu appears in the display, containing the following sub-
menus:
2. Select a sub-menu, then select a preferred value.
The following sub-sections describe camera options and
available values.
Shot Type
Shot Type lets you take multiple photos or shots in succession at
the touch of a key and/or add colorful frames to your photos.
1. In camera mode, press Options, then highlight the Shot
Type icon ( / / / ). The following
values appear in the camera screen:
•
Single Shot
: Lets you take 1 photo at a time.
•
Series Shot
: Lets you take a series of 5 photos.
•
Mosaic Shot
: Lets you take a mosaic photo of 4 or 9 shots (
2x2
/
3x3
).
•
Frame Shot
: Lets you select a colorful frame to include around
your photos (use the Left and Right navigation keys to preview
available frames).
Note:
The
None
frame is a blank frame.
2. Select the desired Shot Type.
Shot Type (also , , or )
Resolution
Night Shot (also )
Self Timer (also , , or )
Quality (also , or )
White Balance (also , , , or )
Color Effect
Settings
Camera 74
Resolution
Resolution lets you change the clarity (in pixels) and size (in
bytes) of your pictures.
1. In camera mode, press Options, then highlight the
Resolution setting. The following values appear in the
camera screen:
•
640 X 480
(pixels)
•
320 X 240
(pixels)
•
128 X 96
(pixels)
2. Select the desired Resolution value.
Note:
The
Resolution
setting affects
Zoom
capabilities. When Resolution is
set to
640 X 480
, Zoom is not available. When Resolution is set to any
value lower than
640 X 480
, Zoom settings
1
–
7
are available.
Night Shot
Night Shot lets you take pictures in low light conditions.
1. In camera mode, press Options, then highlight or
. The following options appear in the display:
•Off
•On
2. Select the Night Shot setting of your choice.
Self Timer
Self Timer lets you delay taking a picture long enough to let you
join others in a picture.
1. In camera mode, press Options, then highlight /
/ / .
The following values appear in the camera screen:
•
Off
•
2 Sec.
•
5 Sec.
•
10 Sec.
2. Select a Self Timer value.
Note:
If you select 2 Sec., 5 sec., or 10 sec., a Self Timer icon (such as,
) appears in the camera screen in the display.
The next time you press , the countdown Self Timer
indicates the time remaining before the camera takes the
picture. The phone reads the countdown timer value to you
beginning with two or three and continuing to zero, when
the picture is taken.
Tip:
To stop the countdown timer without resetting it, press .
75
Quality
You can affect how much your photo is compressed, thereby
reducing it’s overall size (not to be confused with resolution).
3. In camera mode, press Options, then highlight the current
Quality indicator (
SF
,
F
,
N
). The following values appear in
the camera screen: SuperFine, Fine, or Normal.
4. Select the desired Quality value.
White Balance
White Balance allows you to adjust picture quality according to
available light.
5. In camera mode, press Options, then highlight /
/ / / .
The following values appear in the camera screen:
•
Auto
: The camera automatically adjusts picture quality to available
light.
•
Sunny
: Use this setting when taking pictures in full sun.
•
Cloudy
: Use this setting when taking pictures in cloudy conditions.
•
Tungsten
: Use this setting when taking pictures under
incandescent lights.
•
Fluorescent
: Use this setting when taking pictures under
fluorescent lights.
Each option, as you highlight it, shows the effects it has on
a picture.
6. Select the desired White Balance value. The camera
viewfinder screen appears in the display with your
selected White Balance value applied.
The next time you press , the camera applies your
selected White Balance value to your picture.
Camera 76
Color Effect
Change the look of your pictures with Color Effect. Choose from
eight available settings such as Gray, Negative, and Sepia. The
selected color effect previews in the display before you take the
picture.
7. In camera mode, press Options, then highlight . The
following values appear in the display:
•
Normal
: Subjects and pictures appear with a normal hue.
•
Black&White
: Subjects and pictures appear in black and white.
•
Sepia
: Subjects and pictures appear in a brownish-gray hue.
•
Negative
: Subjects and pictures appear in inverted colors.
•
Green
: Subjects and pictures appear in a greenish hue.
•
Aqua
: Subjects and pictures appear in a blue-greenish hue.
Note:
Choose
Normal
to disable Color Effects.
8. Select the Color Effects value of your choice. The camera
viewfinder screen appears in the display with your
selected Color Effects value applied.
When you take your next picture, the camera applies your
selected Color Effects value to your picture.
Settings
When you change Camera Settings values, your changes are
saved for future camera sessions, unlike changes to Camera
Options. To restore Camera Settings to their default values, select
Reset Settings
. (For more information, refer to “Reset Settings”
on page 77)
Auto Save
1. In camera mode, press Options, highlight , then select
Auto Save. The following values appear in the display:
•
Off
•
On
2. Select the automatic save value of your choice. You’re
returned to the camera viewfinder screen.
77
Icon Display
1. In camera mode, press Options, highlight , then select
Icon Display. The following values appear in the display:
•
Display All
: Shows camera icons as seen in
“Camera Screen
Icons”
on page 71.
•
Guideline
: Shows a cross hatch pattern in the view finder screen.
•
No Icons
: Shows a nearly full-display subject image and without
icons.
2. Select the viewfinder screen setting of your choice. You’re
returned to the camera viewfinder screen.
View Mode
Choose the orientation for your pictures.
1. In camera mode, press Options, highlight , then select
View Move. The following shutter sounds appear in the
display:
•
Landscape
: Your pictures are wider than they are tall.
•
Portrait
: Your pictures are taller than they are wide.
Shutter Sound
Choose from four different sounds whenever you take a picture.
Aside from being a cool sound effect, Shutter Sounds acts as an
audible reminder that your camera has taken a picture.
1. In camera mode, press Options, highlight , then select
Shutter Sound. The following shutter sounds appear in
the display:
•
Off
•
Shutter 1
•
Shutter 2
•
Shutter 3
2. Select the shutter sound value of your choice. You’re
returned to the camera viewfinder screen. The next time
you press , you’ll hear your selected shutter sound.
Reset Settings
3. In camera mode, press Options, highlight , then select
Reset Settings. You are prompted to confirm reset of all
camera settings.
•
Select the
Yes
option to reset the camera settings to default values.
•
Select the
No
option to keep the current camera settings.
Camera 78
Zoom
Zoom lets you temporarily enlarge the pictures you take.
Increasing the Zoom (1 – 7) enlarges your pictures (0 is normal).
䊳
In camera mode, press the Navigation key Up or Down to
adjust the Zoom (the screen image enlarges to show the
affects of your changes).
The next time you press , the camera takes an
enlarged picture according to your selected Zoom setting.
Note:
The
Resolution
setting affects
Zoom
capabilities. When Resolution is
set to
640 X 480
, Zoom is not available. When Resolution is set to any
value lower than
640 X 480
, Zoom settings
1
–
7
are available.
Brightness
Brightness lets you temporarily lighten the pictures you take.
Increasing the Brightness (-4 – +4) lightens your pictures (0 is
normal).
䊳
In camera mode, press the Navigation key Left or Right to
adjust the Brightness (the screen image lightens or
darkens to show the affects of your changes).
The next time you press , the camera takes a lighter
or darker picture according to your selected Brightness
setting.
Gallery
Saved pictures are stored in the
My Images
folder. You can
browse the pictures one at a time (expanded mode), or view
several pictures at once in thumbnail format.
1. In camera mode, press Gallery. Any pictures that you’ve
saved appear in the display.
Tip:
You can also access the My Images folder by pressing Menu and
selecting
Multimedia
➔
My Images
. (For more information, refer to “My
Images” on page 80.)
2. Use the Navigation key to browse pictures in the gallery.
3. Press Options while viewing pictures in the Gallery. The
following options appear in the display:
•
Send
: Send the currently displayed or highlighted picture as a
Picture message.
•
Set As
: Assign the currently displayed or highlighted picture to be
standby screen Main Wallpaper, as a Picture ID for someone in your
Contacts list, or as Front Wallpaper.
•
Erase Images
: Erase selected unlocked pictures in the Picture
Gallery. Locked pictures must be unlocked before you can erase
them.
•
Rename
: Rename the currently displayed or highlighted picture.
•
Lock
/
Unlock
: Lock the currently displayed or highlighted picture
so that it cannot be deleted, or unlock the picture so that it can be
deleted.
79
• Slide Show
: View your photos and other images as an automatic
slide show.
•
Image Info
: View the Title, time and date created, size, and
resolution of the currently highlighted or displayed picture.
• Get More Graphics
: Locate and download graphics.
4. Select the desired option to perform the function for the
option or enter its sub-menu.
Switch From Expanded to Thumbnail Mode
1. Highlight a picture that you wish to view full size, then
press
VIEW
.
2. To return to the thumbnail view of your photos, press
LIST
.
Point, Click, and Send Pictures
Take a picture and send it to anyone with a compatible device in
a few easy steps.
1. In camera mode, take a desired picture by pressing
Take
.
2. Press Send. The Create Pic Msg screen appears in
the display.
3. Enter or
Add
the recipient’s phone number or Email
address using the keypad.
4. Press
OK
. The address(es) are saved and the
Subject field appears in the
Create Pic Msg
screen. Use the
Navigation key to move to the other message fields. (For
more information, refer to “Messaging” on page 49)
5. When you are finished composing your message, press
Send to send the Picture message to the intended
recipients.
Multimedia 80
Section 9: Multimedia
This section outlines your phone’s multimedia functions and key
features associated with multimedia.
Accessing Multimedia
1. In standby mode, press Menu, then select
Multimedia. The following sub-menus appear in the
display:
•
Camera
: Lets you launch and set up your phone’s camera. (For
more information, refer to
“Camera”
on page 68.)
•
My Images
: Lets you choose the pictures that appear in your
phone’s display or in picture messages.
•
My Ringtones
: Lets you assign ringtones for Ringtone (calls),
Contact ID, and Alert Tone.
•
Ringback Tones
: Lets you assign sound files as ringback tone
when you place calls.
Tip:
To launch the Multimedia menu using a voice command — In standby
mode, press and hold until the phone prompts, “Say a command.”
Say “Go to Multimedia” into the microphone.
2. Select the desired sub-menu. The following sections
describe the above listed sub-menus in greater detail.
My Images
My Images lets you choose the
pictures that appear in your phone’s
display while in standby mode
(Wallpaper) and as picture IDs for your
contacts.
1. From the Multimedia menu,
select My Images. A matrix of
thumbnail images of your
pictures appears in the display.
Tip:
You can also access My Images from:
– The Camera screen by pressing My Images
– The Edit Contact screen by selecting the picture ID field and pressing
Set.
2. Highlight an image, then do one of the following:
•
Press
Camera
to the Camera viewfinder screen and take a picture.
•
Press
VIEW
to expand the highlighted image to fill the screen.
•
Press the
Options
to access the following options:
–
Send
: Send a copy of the selected image in a Picture message or to
another device over a Bluetooth connection.
81
–
Set As
: Assign the selected picture as the
Main Wallpaper
, as the
Picture ID
for a Contact, or as the
Front Wallpaper
.
–
Erase Images
: Erases one or more selected images.
–
Rename
: Change the file name of the selected image.
–
Lock
/
Unlock
: Prevent/permit deletion of the selected image.
–
Slide Show
: View your images as an automatic slide show.
–
Image Info
: Displays information about the selected image, such as
the file
Name
, creation
Date
and
Time
,
Resolution
, and the data
Size
.
–
Get More Graphics
: Launches the Browser to download additional
images.
3. To return to the previous menu, press . To return to
standby mode, press .
My Ringtones
My Ringtones lets you assign
ringtones (preloaded, recorded, and
downloaded) for Ringtone, Contact ID,
and as Alert Tone.
1. From the Multimedia menu,
select My Ringtones. A list of
ringtones and recorded voice
memos appears in the display.
Tip:
You can also access My Ringtones from:
–A Set Alarm screen by selecting the Ringer option, highlighting the
second (file name) field, pressing the Left or Right navigation key, and
selecting My Ringtones.
(For more information, refer to “Alarm Clock” on page 95.)
–The Edit Contact screen by selecting the Ringtone field, pressing Set,
and selecting My Ringtones.
(For more information, refer to “Editing a Contacts Entry” on page 39.)
Multimedia 82
2. Highlight a ringtone or recorded voice memo. The
following options are available:
•
Press
Set As
to assign the highlighted ringtone. The following
options appear in the display:
–
Ringtone
: Lets you assign the selected ringtone to incoming voice
calls.
–
Contact ID
: Lets you assign the selected ringtone as the distinctive
ringer for a Contact.
–
Alert Tone
: Lets you assign the selected ringtone to
All Msg
,
Text
Msg
,
Picture Msg
, or
Voicemail Msg
.
•
Press
Play
to hear the selected file.
•
Press
Options
, to access the following additional options:
Note:
The
Send
,
Lock
/
Unlock
,
Erase
, and
Rename
options are not available
for preloaded ringtones.
–
Send
: Send a copy of the highlighted file in a Picture message.
–
Lock
/
Unlock
: Prevent/permit deletion of the highlighted file.
–
Erase
: Delete the highlighted file.
–
Rename
: Change the name of the highlighted file.
–
Ringtone Info
: Displays information about the selected file, such as the
file name, the file type, and the data size .
–
Get More Tones
: Find and download additional ringtones from the
Internet.
3. To return to the previous menu, press . To return to
standby mode, press .
Record New Voice Memo
You can use your phone to record voice memos for later
playback.
Note:
The maximum length for a single voice memo is 60 seconds.
The maximum number of voice memos you can record is limited by
available (unused) memory in your phone.
1. From the Multimedia menu,
select My Ringtones ➔
Record New. The Record New
screen appears in the display.
2. Press
Rec
, then start
speaking. As it is recording the
phone displays a countdown
timer that shows the seconds
remaining for the recording.
•
To pause the memo, press
Pause
.
•
When a memo is paused, press
Resume
to continue recording.
3. Press
Save
once you’re finished recording, and the
new recording is automatically saved.
4. To discard a recording, press .
83
Section 10: Navigator
With Navigator, you can .
Accessing Navigator
With Navigator, you can download
full featured applications over the air
including games, personalized ring
tones, pictures, and more.
䊳
In standby mode, press
Menu, then select
Navigator
.
The
Navigator
screen appears
in the display.
1. Highlight the application you
wish to run, then press .
Tools/Utilities 84
Section 11: Tools/Utilities
This section explains how to use your phone’s productivity
assistance tools and utilities to schedule events, set reminders,
perform calculations, and more.
Tools/Utilities Menu
Tools is a suite of Personal Information Manager (PIM)
applications such as a Calendar, and Memo Pad that run on your
phone. You can use your phone to schedule events, set
reminders, perform calculations, and more with the functions
provided by this useful feature.
Opening Tools/Utilities Menu
1. In standby mode, press Menu, then select
Tools/
Utilities
. The
Tools/Utilities
menu appears in the display.
Tip:
To launch the Tools/Utilities menu using a voice command — In
standby mode, press and hold until the phone prompts, “Say a
command.” Say “Go to Tools/Utilities” into the microphone.
2. Select the desired Tool sub-menu.
The following sections provide detailed descriptions of the
Tools and how to use their functions.
Cricket411
Cricket411 lets you access phone book information on your
Wireless Carrier’s server.
1. From the
Tools/Utilities
menu, select Cricket411.
2.
Bluetooth
Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 30
feet without requiring a physical connection.
Unlike infrared, you don't need to line up the devices to beam
information with Bluetooth. If the devices are within a range of
one another, you can exchange information between them, even
if they are located in different rooms.
The
Bluetooth
wireless technology settings menu provides the
ability to view and change the device name, show the visibility,
and set the security for the device.
Turn Bluetooth On/Off
When your phone’s Bluetooth function is turned on, you can use
the Bluetooth features available. When the Bluetooth function is
turned off, you cannot send or receive information via Bluetooth.
85
To save battery life or in situations where Bluetooth use is
prohibited, such as airline traveling, you can turn off the
Bluetooth wireless technology function.
(For more information, refer to “Bluetooth Settings” on page 86.)
Add New Device
To search for available Bluetooth devices:
1. From the
Tools/Utilities
menu, select Bluetooth ➔
Registered List ➔ Add New Device.
If Bluetooth is off, you are prompted to “
Turn bluetooth
on?
”.
•
To turn Bluetooth on, press
Yes
.
•
To leave Bluetooth off, press
No
.
“
Place device you are connecting to in discoverable mode
”
appears in the display.
2. Place the Bluetooth device in discoverable mode. (For
more information, refer to the device user manual.)
3. Press
OK
. Names of the
available devices appears in
the display.
4. Highlight the device you want
to pair with your phone.
5. Press Pair to pair the
selected device with the
phone. Your phone will attempt
to automatically connect with
the selected device.
Note:
If automatic connecting fails, you are prompted to enter the passkey or
PIN for the selected device. (For more information, refer to the device
user manual.)
If you are pairing with another handset, both devices prompt you to
accept an automatically generated PIN. To pair the two handsets, press
Yes
on both devices.
6. The Bluetooth function pairs with the selected device, then
prompts you to confirm that you want to connect with the
device now.
•
To connect with the device now, press
Yes
.
•
To connect with the device at a later time, press
No
.
Tools/Utilities 86
Registered List
Registered List
provides a list of
Bluetooth wireless technology
devices previously connected to your
handset.
䊳
From the
Tools/Utilities
menu,
select Bluetooth ➔
Registered List. The
Bluetooth
screen appears in the display
showing a list of devices
previously connected to your
device.
Connecting to a Bluetooth Device
From the Registered List,
䊳
Select the desired device.
Note:
If you are unable to pair with the device a pop-up appears in the
display. To retry, press Yes.
Bluetooth Settings
1. From the
Tools/Utilities
menu, select Bluetooth ➔
Bluetooth Settings. The following options appear in the
display:
• Enable
/
Disable
: Turns Bluetooth on or off.
• Discovery Mode
: Lets other devices “see” (access) your device.
Select
On
for other devices to see your device, or
Off
for no visibility.
• Device Name
: Shows the handset name. You may change this
name. Enter text changes and press to save them.
• Supported Profiles
: Lists and explains the Bluetooth profiles
supported by your phone.
• Device Info
: Shows the Bluetooth Type, Status, and Address of
your phone.
2. Select the desired option to perform the related process.
87
Voice SVC
Voice SVC is state-of-the-art voice recognition software for your
mobile phone that lets you dial numbers, lookup contact
information, and open applications using your voice. To access
your phone’s voice settings, do the following:
1. From the
Tools/Utilities
menu, select Voice SVC.
The following options appear in the display:
•
Voice Commands:
Lets you place calls, access your Contacts
List, review your appointments, and more by speaking commands
into your phone. (Also see
“Making a Call — Voice Dialing”
on page 23 and
“Voice Method”
on page 36 for more
information.)
•
Voice Settings:
Lets you adjust Voice SVC to better suit your
needs.
2. Select the desired sub-menu.
Voice Commands
To start Voice SVC, do one of the following:
•
In standby mode, press and hold .
“
Say a Command
” appears in the display and is pronounced through
the earpiece, followed by a list of available commands.
•
From the
Tools/Utilities
menu, select
Voice SVC
➔
Voice Command
.
Note:
You can also set your phone to start Voice SVC when you open the
phone. (For more information, refer to “Voice Launch” on page 91.)
Voice SVC includes the following commands:
–
Call
: Lets you dial the phone by saying any name stored in your contact
list, without ever having to record, or “train” that name. Voice SVC
automatically voice-activates all your contacts, even if you have
hundreds of them stored on your phone. You can also dial any
telephone number, even if it is not stored in your contact list, by saying
the digits in the number. (For more information, refer to
“Making a
Call — Voice Dialing”
on page 23.)
–
Send Text
: Lets you launch the
Create Txt Msg
screen. (For more
information, refer to
“Create and Send Text Messages”
on
page 49.)
–
Send Picture
: Lets you launch the
Create Pic Msg
screen. (For more
information, refer to
“Send Picture Messages in Standby Mode”
on
page 55.)
Tools/Utilities 88
–
Lookup
: Lets you look up and display contact information for any name
stored in your Contacts list by saying the name. (For more information,
refer to
“Finding a Contacts Entry”
on page 35.)
–
Go to
: Lets you access all of the Main Menus on your phone.
–
Check
: Lets you check your phone's status (that is, network coverage,
signal strength, and battery in the same report), network coverage,
signal strength, battery, and phone number.
Note:
Speaking clearly, say the command that you want to use.
If, after a few seconds, the device has not recognized a command, it
prompts you to repeat the command.
If, after a few more seconds, it still has not recognized a command, it
tells you “Sorry, no match found,” and cancels voice recognition.
Voice Command Tips:
•
Make sure you wait for the beep before speaking.
•
Speak clearly at a normal volume, as if you were talking on the phone.
Voice-Activating Your Contacts List
When you first start Voice SVC, it reads your Contacts list and
voice-activates all the names stored there. When you have add or
change contacts, Voice SVC automatically reloads and voice-
activates the entire list.
Ending Calls Before Restarting Voice SVC
When you use Voice SVC to make a call, you must end that call
before you can use Voice SVC again.
89
Voice Settings
Choice Lists
Voice SVC uses choice lists when it is not confident it has
correctly recognized a name or number. In this case, it can
display a list of up to three possible choices, and prompt you to
confirm the correct one.
You can change the way that Voice SVC uses choice lists with
name dialing, digit dialing, and contacts. For each feature, you
can choose to always see a choice list (even if there is only one
choice), or never see a choice list (even if there are multiple
choices). If you leave the setting at “Automatic,” Voice SVC
displays a choice list only when it is not confident it has correctly
recognized the name or number.
To change the way Voice SVC uses choice lists:
䊳
From the Voice SVC sub-menu, select Voice Settings ➔
Choice Lists the following options appear in the display:
•
Automatic
—Voice SVC displays a choice list only when it is not
sure if it has correctly recognized the name or number.
•
Always On
—Voice SVC always displays a choice list, even when
there is only one choice.
•
Always Off
—Voice SVC never displays a choice list.
Select the preferred Choice List behavior.
Sensitivity
1. From the Voice SVC sub-menu, select Voice Settings ➔
Sensitivity. The Sensitivity screen appears in the display.
2. Use the Navigation key to adjust the selected Sensitivity
setting toward Reject More spoken commands or names
or toward Reject Less spoken commands or names.
3. To accept the new setting, press .
Tools/Utilities 90
Digit Dialing
If you regularly have trouble with Voice SVC not recognizing the
numbers you say, try adapting digit dialing to your voice.
Adapting can improve the accuracy of digit recognition,
especially for people with strong regional accents.
Note:
After you adapt Digit Dial, your phone is customized to your voice, and
your voice only. Others will not be able to use it unless they reset the
Digit Dialing to factory defaults. (For more information, refer to “Reset
Digits” on page 91.)
Adaptation involves recording several sequences of four digits
each. The recording process takes about a minute.
Tips for Adapting Digit Dialing
•
Use Adapt Digits in a quiet place.
•
Make sure you wait for the beep before starting to speak.
•
Speak clearly, and say each digit distinctly.
•
If you make a mistake while recording a sequence of digits, or if there
is an unexpected noise that spoils the recording, re-record that
sequence.
•
Only adapt digits if you are regularly having problems with digit dialing.
Once you adapt, digit dialing will not work as well for other people
using your phone. (You can always reset digit adaptation to its original
state, as described below.)
Adapt Digits
To adapt digit dialing, do the following:
1. From the Voice SVC sub-menu, select Voice Settings ➔
Digit Dialing ➔ Adapt Digits.
Your phone displays the first digit sequence and “Please
say” plays through the speaker followed by the four digits
appearing in the display.
2. Wait for the beep and say the digits using your normal tone
of voice. After a moment, the phone plays back the
recording and prompts “Did the recording sound ok?”
•
If the recording was good, say “
Yes
.”
•
If you need to re-record, say “
No
.”
If you say “No,” the phone prompts you to pronounce the
digits again. Wait for the beep and then say the digits.
Repeat this step until you’re satisfied with the recording.
3. After confirming that the recording sounds “ok”, continue
the recording process with the next set of digits.
4. After six sets of digits, the phone asks whether you want to
do more adaptation. Answer “Yes.”
5. Repeat steps 4 and 5 for another six sets of digits. After
the second group of six sets of digits, “Adaptation
complete” plays through the speaker and you are returned
to the Adapt Digits menu.
91
Reset Digits
To reset digit dialing to factory default settings, do the following:
1. From the Voice SVC sub-menu, select Voice Settings ➔
Digit Dialing ➔ Reset Digits.
The phone prompts you to confirm digit reset.
2. To reset your digit adaptation, press the OK soft key. To
cancel, press the Back soft key.
Sound
Sound lets you specify what (if any) text prompts you want your
phone to read to you through the earpiece.
1. From the Voice SVC sub-menu, select Voice Settings ➔
Sound. The following options appear in the display:
•
Prompts
: Enables (
On
) or disables (
Off
) playing of prompts.
•
Digits
: Enables (
On
) or disables (
Off
) playing of digits.
•
Names
: Enables (
On
) or disables (
Off
) playing of names.
•
Name Settings
: Lets you adjust the speed and volume of your
phone’s audio name playback.
2. Select the desired option and setting.
Voice Launch
To set the key or action that launches Voice SVC, do the
following:
1. From the Voice SVC sub-menu, select Voice Settings ➔
Voice Launch. The following options appear in the display:
•
Key Only:
Press and hold to activate Voice SVC for one call.
•
Key/Ear Mic
: Attach a headset to your phone. Press and hold
to activate Voice SVC. Now, you can make and end calls using
Voice SVC by pushing the button on the headset.
2. Select the Voice Launch option you want.
About Voice SVC
This option causes the About Nuance screen to appear in the
display, showing version and build information about the Voice
SVC software included on your phone.
1. From the Voice SVC sub-menu, select Voice Settings ➔
About.
The About Nuance screen appears in the display showing
the version level of the Voice SVC (Vsuite) software
currently installed on your phone.
Tools/Utilities 92
Calendar
Calendar lets you view the current, past, or future month in a
monthly calendar layout. While viewing the calendar, the current
date is highlighted and days with scheduled events are
surrounded by a box.
View an event
1. From the
Tools/Utilities
menu,
select Calendar.
A calendar appears in the
display with the current date
highlighted. The month and
year also appear.
2. Use the following keys to
navigate your calendar and
highlight a desired date.
•
To move from one day to another, use the Left/Right navigation
keys.
•
To move from one week to another, use the Up/Down navigation
keys.
•
To view previous months, press the Volume key Up.
•
To view future months, press the Volume key Down.
•
To access other options, press
Options
while viewing the calendar.
The following options appear in the display:
–
Go to Date
: Lets you jump to any date you specify.
–
Go to Today
: Lets you jump to today’s date.
–
Weekly
: Switches from a full month calendar to a single week calendar.
–
Erase Old
: Lets you erase past events.
–
Erase all
: Lets you erase all events.
Select the desired option to perform
the related process.
3. Open the highlighted date by
pressing . A list of
scheduled events appears in
the display.
4. Select the desired event.
Information for the selected
event appears in the display.
93
Add a New Event
1. From the
Tools/Utilities
menu,
select Calendar.
A calendar appears in the
display with the current date
highlighted. The month and
year also appear.
2. Highlight the date of the new
event.
3. Press Add. The New Event screen appears in the display.
4. To select and enter details of the event, use the Navigation
key and the keypad. (For more information, refer to
“Entering Text” on page 31.)
5. Enter the
Appointment Name
for this event.
6. Enter the start and End dates and times for the event using
the keypad. Enter the dates and times for the event using 2
digits for day, month, hour, and minute entries. Use 4 digits
for year entries.
7. To change between AM and PM, use the Left and Right
navigation keys.
8. When you’re finished entering the dates and times,
highlight the Recurrence field, using the Up and Down
navigation keys. To select a recurrence frequency, use the
Left and Right navigation keys.
9. Highlight the Alert field and select a type of alert, using the
Left and Right navigation keys.
10. Highlight the Reminder field, and set the Reminder to Off
or to select a reminder interval using the Left and Right
navigation keys.
11. Highlight the Alert time field, use the Up and Down
navigation keys, then select the amount of time before the
event occurs that you wish to be notified by an alert using
the Left and Right navigation keys.
12. To store the event in your calendar, press
Save
. An
alert will notify you prior to the event, if you set a
notification alert.
Tools/Utilities 94
Memo Pad
You can create a notes and store them in Memo Pad. You can’t
prioritize or set an alert for stored notes. Return to Memo Pad
anytime you wish to review and edit your notes.
Add a Memo
1. From the
Tools/Utilities
menu, select Memo Pad. If you
have any stored memos, they appear as a list in the
display. If this is your first time in Memo Pad, “No
memos” appears in the display.
2. To add a new memo, press Add.
3. Enter memo text using the keypad. (For more information,
refer to “Entering Text” on page 31.)
4. When you’re finished entering memo text, press to
save the memo.
View, Edit, and Erase Memos
1. From the
Tools/Utilities
menu, select Memo Pad. A list of
your stored memos appears in the display.
2. Highlight the desired memo.
3. To view the memo, press
View
.
4. To edit the memo you are viewing, press Edit.
Enter text changes using the keypad. (For more
information, refer to “Entering Text” on page 31.)
5. To erase the memo you are viewing, press Options, then
select Erase. You are prompted to verify the erasure.
•
To erase the memo, press
Yes
.
•
To keep the memo, press
No
.
95
Alarm Clock
Your phone has an alarm clock that can be set to go off once, or
daily at a specified time. Once set, the alarm clock is easy to
change or turn off completely.
Note:
The alarm doesn’t function when the phone is turned off. If the time for
an alarm that was set for Once has elapsed and the phone is off, the
alarm occurs at the same time on the following day.
1. From the
Tools/Utilities
menu, select Alarm Clock. The
Alarm Clock screen appears in the display.
2. Press
Add
or
Options
➔
Add
new alarm
to set an Alarm. A
Set Alarm
screen appears in
the display containing the
following options:
•
Alarm
•
Time
•
Frequency
•
Ringer
3. Highlight the options you wish to change, then select
values for the options using the Left and Right navigation
keys.
To enter the Time for the alarm, use the keypad.
4. When you’re finished entering and selecting values for the
alarm, press . The alarm is set and the Alarm Clock
icon ( ) appears in the top of the display.
Note:
If you have enabled Bluetooth on your phone, the Bluetooth icon blocks
the Alarm Clock icon.
When an Alarm Sounds
An animated alarm clock appears in the display with the options
Snooze or Dismiss, and an alert sounds when the specified time
for the alarm arrives.
䊳
To silence the alarm, use the Navigation key to select
Dismiss.
•
If the alarm was set as a Daily alarm, the alarm icon remains in the
top of the display.
•
If the alarm was set as a Mon.-Fri., the alarm icon remains in the
top of the display.
•
If the alarm was set as a Weekends only alarm, the alarm icon
remains in the top of the display.
•
If the alarm was set as a Once only alarm, the alarm icon
disappears from the top of the display.
Tools/Utilities 96
Tur n Off the Alarm
Turning off an Alarm stops it from sounding when the set time is
reached while retaining the Alarm settings for your reuse.
1. From the
Tools/Utilities
menu, select Alarm Clock.
2. Highlight an Alarm.
3. Press
Options
and select
Off
. The highlighted Alarm is
turned off, but the alarm settings are retained for later
reuse.
Reset the Alarm
Resetting one or all Alarms erases all of your Alarm settings and
restores the default settings.
1. From the
Tools/Utilities
menu, select Alarm Clock.
2. If desired, highlight an existing alarm.
3. Press
Options
. Select from the following options:
•On
/
Off
: Enables or disables the highlighted alarm while retaining
the current settings.
• Add new alarm
: Define a new alarm.
•Erase this alarm
: Deletes the highlighted alarm.
•Erase all
: Deletes all alarms.
World Time
World Time lets you view the time of
day or night in another part of the
world. World Time displays time in
the 24 different time zones around
the world.
1. From the
Tools/Utilities
menu,
select World Time. A world
map appears in the display.
2. To display the time zone and
city that you wish to view,
press the Navigation key Left
or Right.
– or –
Press
Options
and select
Go to
City
, then press the Navigation
key or the Volume key Up or
Down.
The following time zones/cities
are supported:
Denver Phonenix Dallas Chicago
Miami New York Caracas La Paz
Newfoundland Buenos Aires Brasilia Mid Atlantic
97
3. Do one of the following:
•
To show Daylight Savings Time (DST) for the displayed time zone,
press
DST On
[the DST on icon ( ) appears]; or press
DST Off
to
display standard time.
•
To set the displayed time zone as the home time zone for your
phone, press
Options
and select
Set as Home Zone
. You are
prompted to confirm the Home Zone change. To save your change,
press
Yes
. The Home Zone marker moves to the displayed time
zone.
•
To keep the displayed time zone as a second, default time zone,
press . You are returned to the
Tools/Utilities
menu.
•
To discard the displayed time zone and close the World Time
screen, press . You are returned to the
Tools/Utilities
menu.
Calculator
You can perform calculations,
including addition, subtraction,
multiplication, and division using your
phone.
1. From the
Tools/Utilities
menu,
select Calculator. The
Calculator appears in the
display.
2. Enter the first number in your calculation using the keypad
(numbers can be up to 15 digits long).
•
To enter a decimal point, press . (Calculator only accepts up to
3 digits after a decimal point.)
•
To change the sign for a number to a negative, press .
3. Use the Navigation key to set the type of calculation that
you wish to perform. Your choices are as follows:
•
Up
navigation key: [
x
] Multiplication
•
Left
navigation key: [
-
] Subtraction
•
OK
key: [
=
] Equals/Total
•
Right
navigation key: [
+
] Addition
•
Down
navigation key: [
÷
] Division
Cape Verde Lisbon London Paris
Rome Berlin Athens Istanbul
Helsinki Nairobi Moscow Jiddah
Tehran Abu Dhabi Kabul Tashkent
Mumbai New Delhi Colombo Kathmandu
Alma-ata Bangkok Jakarta Hong Kong
Beijing Seoul Tokyo Adelaide
Guam Sydney Okhotsk Wellington
Auckland Samoa Midway Honolulu
Hawaii Alaska San Francisco Los Angeles
Tools/Utilities 98
For nested operations [such as (1.81 + 9.34) / 5.22] and to
calculate powers (such as 32), press Operator. The
following options appear in the display:
•
(
: Beginning of nested operation
•
)
: Ending of nested operation
•
Power
: Raise the current number to the power of your next entry
4. Use the keypad to enter the next number in your
calculation.
5. Repeat steps 3 and 4 as needed.
6. To perform the calculation and view the result, press .
To clear your last operation or number entry, press .
To clear all of your entries, press Clear.
Stop Watch
You can use this menu to set a stop
watch.
1. From the
Tools/Utilities
menu,
select Stop Watch.
2. Press to Start, Stop, and
continue the stopwatch count.
3. Press Record at the start of
each succeeding event/lap to
record the completion time for
the previous event/lap.
4. Press Reset to erase all stop
watch (lap) times recorded.
99
Converter
The conversion menu provides the following conversion features:
•
Currency
•
Length
•
Weight
•
Volume
•
Area
•
Temperature
To convert a currency, length, weight,
volume, area, or temperature, do the
following:
1. At the Tools/Utilities menu,
select Converter.
2. Select the conversion feature
you wish to use. The selected
conversion feature screen appears in the display with the
From
unit field highlighted.
3. Use the Left and Right navigation keys to select the unit to
be converted From.
4. Highlight the
From
quanity field.
5. Use the keypad to enter the quantity you want converted in
the From quantity field.
6. Highlight the
To
unit field.
7. Use the Left and Right navigation keys to select the units to
be converted From and To. The converted quantity
appears in the To quantity field.
Note:
To include a decimal point, press .
Tools/Utilities 100
Currency — Reviewing/Editing Exchange Rates
The Currency Converter includes long-term average exchange
rates as default values. To review and/or change a default
exchange rate to the current exchange rate, do the following:
1. From the
Tools/Utilities
menu, select Converter ➔
Currency.
2. Press Rate. The Exchange
Rate list for the USD (U.S.
Dollars) currency appears in
the display.
3. Highlight the currency
exchange rate you want to
review or change.
4. To change the highlighted
exchange rate, press
Edit
.
5. Use the keypad to change the
current exchange rate. (For
more information, refer to
“Entering Numbers” on
page 32.)
•
To save the changed exchange
rate, press .
•
To discard your changes and return to the Currency Converter
screen, press
Cancel
.
Currency — Adding Exchange Rates
You can use the Currency Converter to convert from and to
obscure currencies by adding exchange rates for these
currencies. To add a currency and its exchange rate to the
Currency Converter, do the following:
1. From the
Tools/Utilities
menu, select Converter ➔
Currency.
2. Press Rate. The Exchange Rate list for the USD (U.S.
Dollars) currency appears in the display.
3. Press Add. The Add Exchange
Rate screen appears in the
display with the Base field
highlighted.
4. Use the Left and Right
navigation keys to select the
Base currency to be converted
from.
5. Highlight the Currency field.
6. Enter an identifier of up to 5
characters for the new currency using the keypad. (For
more information, refer to “Entering Text” on page 31.)
101
7. Highlight the Exchange Rate field.
8. Enter a decimal exchange rate for the new currency using
the keypad. (For more information, refer to “Entering
Numbers” on page 32.)
Note:
Press to enter the decimal point.
The Exchange Rate field only accepts up to 5 digits after the decimal
point.
9. To save the new exchange rate, press . The Exchange
Rate list for the USD (U.S. Dollars) currency appears in the
display with your new exchange rate at the bottom of the
list.
Currency — Erasing Exchange Rates
You cannot erase the preloaded currencies from the Exchange
Rate list. You can erase a currency that you have added to the list
by doing the following:
1. From the
Tools/Utilities
menu, select Converter ➔
Currency.
2. Press Rate. The Exchange Rate list for the USD (U.S.
Dollars) currency appears in the display.
3. Highlight the currency exchange rate to be erased.
4. Press Erase. You are prompted to confirm the erasure.
•
To erase the highlighted exchange rate, press
Yes
.
•
To keep the highlighted exchange rate, press
No
.
Tools/Utilities 102
Tip Calculator
Tip Calculator automatically calculates the
following amounts:
•
Gratuity (tip)
•
Individual payment (for groups)
Calculations are based on the total amount
of the check, a selected percentage, and
the number of people paying.
1. From the
Tools/Utilities
menu, select Tip Calculator. The
Tip Calculator screen appears in the display with the Bill
field highlighted.
2. Use the keypad to enter the total amount of the bill.
Note:
To include a decimal point, press .
3. If needed, highlight the Tip field and use the keypad to
change the tip percentage.
4. If needed, highlight the # Paying field and use the keypad
to change the number of persons paying.
5. The amount of the Tip, the bill Total, and the amount each
person should pay appear in the lower half of the screen.
103
Section 12: Changing Your Phone’s Setting
This section explains how to customize your call and phone
settings to suit your needs and preferences.
Accessing Your Phone’s Settings
1. In standby mode, press Menu, then select Settings.
Tip:
To launch the Settings menu using a voice command — In standby
mode, press and hold until the phone prompts, “Say a command.”
Say “Go to Settings” into the microphone.
The Settings menu appears in the display showing the
following options and sub-menus:
•
Location
: Set your phone to send location data continually or only
when you dial 911.
• Display Settings
: Set your phone’s menu appearance, display
brightness and contrast, and display content.
• Sound Settings
: Set your phone’s volume, ringers, keypad tones,
alerts, and more.
•
Call Settings
: Set how your phone handles voice and data calls.
•
Phone Settings
: Set your phone’s safety, network, and security
options.
•
Memory Info
: Select where photos are stored, manage your
phone’s memory, and format and manage Memory Card storage.
•
Phone Info
: Access information about your phone, such as your
phone number, meanings of phone status icons, hardware and
software versions, and more. (Some of this information is valuable
to you if you need to call for customer support.)
2. Select the desired option or sub-menu.
Location
This function identifies your location to the network via the Global
Positioning System (GPS). You can set this function for
continuous operation or to operate only in the event that you dial
and Emergency Number, such as 911. (For more information,
refer to “Emergency #” on page 112.)
Note:
Contact your Wireless Provider to determine whether, when, or where
location-based services are available.
1. At the Settings menu, select Location.
The following options appear in the display:
•
Location On
: GPS location is on whenever you make or receive a
call, wherever the feature is available.
•
911 Only
: GPS location is on only when you dial 911.
2. Select the desired Location setting. You’re returned to the
Settings menu.
Changing Your Phone’s Setting 104
Display Settings
This section shows you how to change your phone’s menu
appearance, display brightness and contrast, and display content
to better meet your needs.
To access the Display Settings sub-menu, do the following:
䊳
At the Settings menu, select Display Settings. The
Display Settings sub-menu appears in the display.
The following sub-sections detail the available Display Settings.
Wallpaper
Wallpaper lets you choose the images that appear in the
background of your phone’s front and main displays while your
phone is closed or in standby mode.
1. At the
Display Settings
menu, select Wallpaper.
The following options appear in the display:
•Main Display
• Front Display
Note:
When you select
Front Display
, your Wallpaper selection automatically
changes the
Clock Format
setting for the
Front Clock
to
Samsung
. (For
more information, refer to “Clock Format” on page 104.)
2. Select the Display whose Wallpaper you wish to change.
The following options appear in the display:
•
My Images
: Lets you select a photo you’ve taken or an image that
you’ve downloaded from the Internet as a wallpaper image.
•
Preset Images
: Lets you select an image that came preloaded
with your phone as a wallpaper image.
3. Select the image type that you wish to use. An array of
images appears in the display.
4. Select the image that you wish to use to save your
selection.
Clock Format
Clock Format lets you choose the format your phone will use to
present the current time in your phone’s front display.
1. At the
Display Settings
menu, select Clock Format ➔
Front Clock. The following options appear in the display:
•
Digital
105
•
Analog
• Samsung
Note:
The
Clock Format
setting for the
Front Clock
automatically changes to
Samsung
when you change the
Wallpaper
setting for the
Front Display
.
(For more information, refer to “Wallpaper” on page 104.)
2. Select the desired clock format. A “
Clock Format Set
”
message appears in the display, and you are returned to
the Clock Format menu.
Theme
Lets you select the color theme used to display menu screens
and popup menus and messages. You can choose from a variety
of themes.
1. At the
Display Settings
menu, select Theme. The following
options are available:
•
Samsung
•
Celestial
2. Select the desired theme, then press to save your
setting.
Dialing Font Size
Lets you select the size of your dialing font.
1. At the
Display Settings
menu, select Dialing Font Size.
The following options appear in the display:
•
Normal
•
Large
2. Select the desired setting.
Backlight
You can set the backlight for your display or keypad to remain on
for a specified period of time or remain on as long as the folder is
open.
Changing Your Phone’s Setting 106
Note:
Prolonged backlight use drains your battery faster.
1. At the
Display Settings
menu, select Backlight. The
following sub menus appear in the display:
•
Main Display
: Sets the time the internal display backlight remains
on after a period of inactivity. Optional settings are:
10 seconds
,
15 seconds
,
30 seconds
,
Always On
, and
Always Off
.
•
Keypad
: Sets the amount of time the keypad backlight remains on
after a period of inactivity. Optional settings are:
10 seconds
,
15
seconds
,
30 seconds
,
Always On
, and
Always Off
.
•Charging
: Sets the time the internal display backlight remains on
while connected to a charger and after a period of inactivity.
Optional settings are:
10 seconds
,
15 seconds
,
30 seconds
,
Always On
, and
Always Off
.
•
Brightness
: Sets the brightness of the backlight to one of five
possible settings.
2. Select the desired sub menu, then select the desired
setting.
Front Contrast
Front Contrast lets you choose the display contrast to suit
yourself.
1. At the
Display Settings
menu, select
Front Contrast
.
2. Use the Left/Right navigation keys to sample any of the 21
display contrast settings from
-50
to
+50
. The screen
shows the effects of each new setting.
•
To save the new setting and return to the
Display Settings
menu,
press .
•
To return to the
Display Settings
menu and discard the new
setting, press .
Sound Settings
This section shows you how to customize your phone’s audio
properties, such as ringers, keypad tones, alerts, and more.
To access the Sound Settings sub-menu, do the following:
䊳
At the Settings menu, select Sound Settings. The Sound
Settings sub-menu appears in the display.
The following sub-sections detail the available Sound Settings.
Master Volume
Use the
Master Volume
option to set the volume for incoming
calls and alarms.
1. From the Sound Settings menu, select Master Volume.
2. Use the Navigation key or the Volume key (on the left side
of your phone) to change the volume level (Silence All,
Vibrate, Low, Low/Medium, Medium, Medium/High,
High).
107
Tip:
You can add vibration to Master Volume settings
Low
–
High
. Just press
Vib.on
( ).
Note:
The Vibrate icon ( ) appears in the display when the phone is in
Vibrate
mode. The Vibrate/Ring icon ( ) appears in the display when
you press
Vib.on
( ) with Master Volume set to
Low
–
High
.
Tip:
To preview the selected ringtone or alert tone while adjusting the volume
setting, press Play ( ).
3. Press to save the volume level/vibrate mode.
Ringer Type
You can assign ringtones or sounds for calls, alarms, and other
alerts in the Ringer Type sub menu.
1. From the Sound Settings menu, select Ringer Type. The
following Ringer Types appear in the display:
•
Voice Calls
•
Messages
–
Text Message
–
Picture Message
–
Voicemail
–
Msg Reminder
(On/Off)
2. Select the desired Ringer Type. The
My Ringtones
screen
appears in the display.
Note:
Your phone includes preloaded ringtones and recorded sounds. You
can download additional ringtones using easyedgeSM.
You can record your own sounds by accessing
My Ringtones
through
the
Multimedia
menu. Select
Menu
➔
Multimedia
➔
My Ringtones
➔
Record New
. (For more information, refer to “Record New Voice Memo”
on page 82.)
3. Use the Navigation key to scroll through the ringtones and
sounds for the preferred ringer.
•
To play each ringtone or sound, press the
Play
soft key.
•
To save the desired ringtone or sound selection, press .
Alerts
You can set your phone to sound an alert whenever you enter or
leave your service area, connect or disconnect a call, and other
options.
1. From the Sound Settings menu, select Alerts. The
following options appear in the display:
•
Minute Beep
: Sound an alert ten seconds before each elapsed
minute of a call.
•
Roaming
: Sound an alert when you leave your home service area
while on a call.
•
Call Connect
: Sound an alert when you connect a call.
•
Power On/Off
: Play melodies when you turn your phone on or off.
• Charge Alert
: Sound an alert when the battery is fully charged.
Changing Your Phone’s Setting 108
2. Select the desired option. The following settings appear in
the display:
•
On
•
Off
3. Select the desired setting.
Key Tone
Key Tone allows you to adjust the volume level and length of the
tone that the keypad generates each time you press a key.
1. From the
Sounds
menu, select Key Tone.
The following options appear in the display:
•
Tone Level
•
Tone Length
2. Select the desired option.
•
If you select
Tone Level
:
–
To set the keypad Tone Level, use the Volume key or Navigation key.
–
To save your Tone Level setting, press . You are returned to the
Key Tone
sub-menu.
•
If you select
Tone Length
:
–
Select
Normal
or
Long
. You are returned to the
Key Tone
sub menu.
Call Settings
The Call Settings options let you select how your phone handles
voice and data calls.
To access the Call Settings sub-menu, do the following:
䊳
At the Settings menu, select Call Settings. The Call
Settings sub-menu appears in the display.
The following sub-sections detail the available Call Settings.
Call Answer
You can select a specific answer mode when you receive an
incoming call. Your phone can be preset to answer when you do
any of the following:
•
Press any key
•
Press the Send key
•
Open the flip
1. At the Call Settings sub-menu, select Call Answer. The
Call Answer sub-menu with the following options appears
in the display:
•
Any Key
: Press any key except the , , or Left soft key to
answer an incoming call.
•
Send Key
: Press to answer an incoming call.
•
Flip Open
: Open the flip to answer an incoming call.
Tip:
You can set your phone to answer calls automatically, without any input
from you. (For more information, refer to “Auto Answer” on page 109.)
2. Select the method you wish to use for answering calls.
109
Call Alert
Call Alert determines how your phone alerts you to an incoming
call.
1. At the Call Settings sub-menu, select Call Alert. The
following options appear in the display:
• Ring Only
: The
Voice Calls
ringtone plays. (For more information,
refer to
“Ringer Type”
on page 107.)
•Caller ID + Ring
: Caller ID plays along with the
Voice Calls
ringtone.
• Name Repeat
: For calls from a Contact, the phone plays the
Contact’s name. (For more information, refer to
“Understanding
Your Contacts”
on page 34.)
2. Select the desired setting.
Auto Answer
Auto Answer enables your phone to automatically answer calls
after a period of time that you specify.
1. At the Call Settings sub-menu, select Auto Answer. The
following options appear in the display:
•
Off
: Disables automatic answering of calls
•
After 1 Second
: Phone automatically answers calls after 1 second
•
After 3 Seconds
: Phone automatically answers calls after 3
seconds
•
After 5 Seconds
: Phone automatically answers calls after 5
seconds
2. Select the desired setting.
Auto Retry
Auto Retry automatically re-dials a number if the connection fails.
Depending upon your location, the number of times your phone
automatically dials the number may vary.
1. At the Call Settings sub-menu, select Auto Retry. The
Auto Retry sub-menu with the following options appears
in the display:
•
Off
: Disables automatic redialing of numbers
•
Every 10 Seconds
: Phone automatically redials a number every
10 seconds
•
Every 30 Seconds
: Phone automatically redials a number every
30 seconds
•
Every 60 Seconds
: Phone automatically redials a number every
60 seconds
2. Select the desired setting.
TTY Mode
Your phone is fully TTY compatible. TTY equipment is connected
to your phone through the headset connector on the right side of
Changing Your Phone’s Setting 110
the phone. TTY Mode must be enabled before you can use your
phone with a TTY device.
1. At the Call Settings sub-menu, select TTY Mode. You are
prompted to confirm you want to change the current TTY
Mode setting.
Note:
The “Enabling TTY may impair headset use and non-TTY
accessory performance” message pops up when you select TTY
Mode.
•
To access the TTY Mode options, press the
Yes
soft key.
•
To return to the
Call Settings
sub-menu, press the
No
soft key.
2. When you press the Yes soft key, the following options
appear in the display:
•
TTY Full
: Enables TTY mode and disables microphone and
earpiece
•
TTY + Talk (VCO)
: Enables TTY mode and microphone
•
TTY + Hear (HCO)
: Enables TTY mode and earpiece
•
TTY Off
: Disables TTY mode
3. Select the desired TTY Mode setting.
Note:
The TTY icon ( ) appears in the top of the display when the phone is
in standby mode.
Phone Settings
The Phone Settings options let you tailor your phones basic
operations. To access the Phone Settings sub-menu, do the
following:
䊳
At the Settings menu, select Phone Settings. The Phone
Settings sub-menu appears in the display.
The following sub-sections detail the available Phone Settings.
Airplane Mode
When set to On, Airplane Mode disables all radio functions of
your phone. This prevents you from receiving or making calls
(except emergency calls), but allows you to use other features
(such as the camera and the Tools) safely in sensitive
environments, such as on board an aircraft.
1. At the Phone Settings sub-menu, select Airplane Mode.
The following options appear in the display:
•
On
: Disables the radio transmitter and receiver in your phone
Correct
Incorrect
111
•
Off
: Enables the radio transmitter and receiver in your phone
2. Select the desired Airplane Mode setting.
Language
The language option on your phone can change the language of
voice prompts, menus, and key-input.
1. At the Phone Settings sub-menu, select Language. The
following options appear in the display:
•
English
•
Español
2. Select your language preference.
Security
Use the Security sub-menu to lock your phone, set up emergency
numbers, enable or disable voice privacy, set restrictions, and
other security options.
To access the
Security
menu, do the following:
1. From the
Settings
menu, select
Phone Settings
➔
Security
.
The “
Enter Code
” prompt appears in the display.
2. Enter the four-digit lock code using the keypad.
Note:
The default lock code is the last four digits of your mobile phone
number.
The “
Enter Code
” prompt disappears and the
Security
menu appears in the display.
Lock Phone
Locking the phone limits all outgoing calls except calls to 911
emergency and the three user-programmable emergency
numbers. You can lock the phone manually during use, or set the
phone to lock automatically when it is turned on. With the phone
in lock mode, you can answer incoming calls, but you must
unlock the phone to place outgoing calls (except to emergency
and secret numbers).
1. At the Security sub-menu, select Lock Phone. The
following Device Lock Mode options appear in the display:
•
Lock
: Locks the phone immediately. (The phone stays locked until
you enter the lock code.)
•
Unlock
: Unlocks the phone.
•
On Power up
: The phone locks automatically the next time your
phone is powered on. (The phone stays locked until you enter the
lock code.)
2. Select the Device Lock Mode option of your choice.
Change Lock
The default lock code for your phone is generally the last four
digits of your phone number. It is advisable to change the default
lock code to a secret code for security purposes.
1. At the Security sub-menu, select Change Lock. You’re
Changing Your Phone’s Setting 112
prompted to enter the new lock code.
2. Enter the new lock code. You’re prompted to re-enter the
new lock code for verification.
3. Enter the new lock code again. Your changes are stored.
Note:
Your phone does not allow you to view the lock code for obvious
security reasons. If you change the lock code, be sure to write down or
memorize the new code.
Emergency #
Your phone provides the option of storing three emergency
numbers. Each number can be up to 32 digits in length. All
emergency numbers can be manually called at any time, even
when your phone is locked or restricted. This can be a useful
feature for controlling outgoing calls from your phone.
Note:
Emergency number 911 is hard-coded into your phone. You can dial
this number any time, even when the phone is locked or restricted. If
you call 911 an audible tone is heard and an Emergency prompt
appears in the display for the duration of the call.
Important!:
Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
Important!:
DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.
Remember to always turn your phone on and check for adequate
signal strength before placing a call.
Store Emergency Numbers
1. At the Security sub-menu, select Emergency #.
2. Select from the three emergency number entries.
3. Enter an emergency number (up to 32 digits in length).
4. Press to save the number that you entered.
Call Emergency Numbers in Lock Mode
1. In standby mode, enter the emergency number.
2. Press to place the call.
Resetting Your Phone
Reset Phone returns all setup options to their factory default.
1. At the Security sub-menu, select Reset Phone. You are
prompted to confirm that you want to restore your phone’s
default settings (except for the Contacts and Voice Dial).
•
To restore default settings, press the
Yes
soft key.
•
To retain your current settins and return to the
Security
sub-menu,
press the
No
soft key.
113
Erase all entries
Erase all entries erases all information from your Contacts list.
Note:
To completely remove any personal information stored on your device,
see “Precautions for Transfer and Disposal” on page 142.
1. At the Security sub-menu, select Erase All Entries. You’re
prompted to enter the lock code again.
2. Enter the four-digit lock code using the keypad.
Note:
The default lock code is the last four digits of your mobile phone
number.
The “Erase all entries?” prompt appears in the display.
•
To erase all Contacts list entries, press the
Yes
soft key.
•
To keep the current Contacts list entries, press the
No
soft key.
Restriction
Restriction lets you limit the use of your phone to make outgoing
calls and/or to receive incoming calls to any numbers, to no
numbers, or to calls from/to your Contacts.
1. At the Security sub-menu, select Restriction.
The following options appear in the display:
•Calls
: Sellect restrictions for Incoming and Outgoing voice calls.
• SMS Messages
: Sellect restrictions for Incoming and Outgoing Text
messages.
• MMS Messages
: Sellect restrictions for Incoming and Outgoing
Picture messages.
•Data
: Allow All data calls or Allow None.
2. Select the type of calls or messages you want to allow or
restrict.
The following options appear in the display:
•Incoming
: Restrict/allow incoming calls.
• Outgoing
: Restrict/allow outgoing calls.
3. Select the call direction you want to allow or restrict.
The following options appear in the display:
• Allow All
: No restriction on calls.
• Allow Contacts
: (All calls except Data) No restriction on calls to and
from Contacts only.
• Allow None
: Restrict (block) calls.
Note:
Default setting for all Restrictions is
Allow All
.
4. Select the desired setting.
Changing Your Phone’s Setting 114
System Select
The System Select menu allows you to select the roaming
setting for your phone.
1. At the Phone Settings sub-menu, select System Select.
The following roaming options appear in the display:
•Home Only
: Your phone is available for normal operation only within
your designated coverage area.
•Automatic
: The Preferred Roaming List (PRL) is used to acquire
service. If no preferred systems are found, any digital system is
acquired.
2. Select the desired roaming option.
Set Time
Use the Set Time option to set the current date and time.
Note:
In digital service mode, the Set Time feature is disabled. The network
adjusts time and date automatically.
1. At the Phone Settings sub-menu, select Set Time. The
following options appear in the display:
•
Set Date
•
Set Time
2. Select the desired option.
For Set Date, the Set Date screen appears in the display.
•
Enter the current date using your keypad.
The year must be entered using all four digits.
For Set Time, the Set Time screen appears in the display.
•
Enter the current time using your keypad.
The hour and minute must be entered using two digits each and in 12-
hour format.
•
Use the Left and Right navigation keys to select
am
or
pm
.
•
Press to save the your time setting.
•
Enter the current date using your keypad.
The month and day must be entered using two digits each. The
year must be entered using all four digits.
•
Press to save your date setting.
Speed Dial
Enable or disable Speed Dialing of selected Contacts.
Tip:
Disabling
Speed Dial
also disables the Voicemail key function. (For more
information, refer to “Voicemail Key” on page 12 and to “Setting Up Your
Voicemail” on page 9.)
1. At the Phone Settings sub-menu, select Speed Dial. The
following options appear in the display:
•Off
: Disable Speed Dial.
•On
: Enable Speed Dial (default setting).
2. Select the desired option.
115
Quick Search
Quick Search is an easy way to locate Menu items and Contacts.
1. At the Phone Settings sub-menu, select Quick Search.
The following options appear in the display:
•
On
: Quick Search is enabled
•
Off
: Quick Search is disabled
2. Select the desired Quick Search setting.
Searching for a Contact
1. In standby mode, press the first few numeric keys that
correspond to the letters of the Contacts name.
For example, to search for “Sally” you could enter:
2. Press the Up navigation key. The
Find
screen appears in
the display showing the Contacts entries with names that
correspond to your key entries.
3. Highlight the desired Contacts entry.
4. Press to call the highlighted Contact.
Memory Info
The Memory Info screen lets you review your phone’s available
memory and helps you manage your files stored there.
1. At the Settings menu, select Memory Info. The
Memory
Info
screen appears in the display showing the following
information:
•Total Used
memory
• Available
unused memory
•My Images
memory usage
• My Ringtones
memory usage
• Applications
memory usage
• Pic Msg
memory usage
2. To return to the Settings menu, press .
SAL
Changing Your Phone’s Setting 116
Phone Info
The Phone Info options show you the hardware and software
versions of your phone, definitions of the icons that appear at the
tops of the phone displays, and the phone number assigned to
your phone.
1. At the Settings menu, select Phone Info. The following
options appear in the display:
• Phone Number
— Display your phone number.
• Icon Glossary
— Display a list of all icons used on your phone’s
status bar.
•Version
— Display the phone’s hardware and software versions.
•ESN
/
MEID
— Display the MEID numbers for your phone.
• WarrantyDateCode
— Display the warranty date and time code.
• Refurbish
— Display the date and time the phone was last
refurbished and the number of times the phone has been
refurbished.
2. To return to the Settings menu, press .
117
Section 13: Health and Safety Information
This section outlines the safety precautions associated with using
your phone. The terms “mobile device” or “cell phone” are used
in this section to refer to your phone.
Read this information before
using your mobile device
.
Exposure to Radio Frequency (RF) Signals
The U.S. Food and Drug Administration (FDA) has published
information for consumers relating to Radio Frequency (RF)
exposure from wireless phones. The FDA publication includes the
following information:
Do cell phones pose a health hazard?
Many people are concerned that cell phone radiation will cause
cancer or other serious health hazards. The weight of scientific
evidence has not linked cell phones with any health problems.
Cell phones emit low levels of Radio Frequency (RF) energy. Over
the past 15 years, scientists have conducted hundreds of studies
looking at the biological effects of the radio frequency energy
emitted by cell phones. While some researchers have reported
biological changes associated with RF energy, these studies have
failed to be replicated. The majority of studies published have
failed to show an association between exposure to radio
frequency from a cell phone and health problems.
The low levels of RF cell phones emit while in use are in the
microwave frequency range. They also emit RF at substantially
reduced time intervals when in the stand-by mode. Whereas high
levels of RF can produce health effects (by heating tissue),
exposure to low level RF that does not produce heating effects
causes no known adverse health effects.
The biological effects of radio frequency energy should not be
confused with the effects from other types of electromagnetic
energy.
Very high levels of electromagnetic energy, such as is found in
X-rays and gamma rays, can ionize biological tissues. Ionization
is a process where electrons are stripped away from their normal
locations in atoms and molecules. It can permanently damage
biological tissues including DNA, the genetic material.
The energy levels associated with radio frequency energy,
including both radio waves and microwaves, are not great
enough to cause ionization of atoms and molecules. Therefore,
RF energy is a type of non-ionizing radiation. Other types of
non-ionizing radiation include visible light, infrared radiation
(heat), and other forms of electromagnetic radiation with
relatively low frequencies.
Health and Safety Information 118
While RF energy does not ionize particles, large amounts can
increase body temperatures and cause tissue damage. Two
areas of the body, the eyes and the testes, are particularly
vulnerable to RF heating because there is relatively little blood
flow in them to carry away excess heat.
Research Results to Date: Is there a connection between
RF and certain health problems?
The results of most studies conducted to date say no. In addition,
attempts to replicate and confirm the few studies that have
shown a connection have failed.
The scientific community at large therefore believes that the
weight of scientific evidence does not show an association
between exposure to Radio Frequency (RF) from cell phones and
adverse health outcomes. Still the scientific community has
supported additional research to address gaps in knowledge.
Some of these studies are described below.
Interphone Study
Interphone is a large international study designed to determine
whether cell phones increase the risk of head and neck cancer. A
report published in the International Journal of Epidemiology
(June, 2010) compared cell phone usage for more than 5,000
people with brain tumors (glioma and meningioma) and a similar
number of healthy controls.
Results of this study did NOT show that cell phones caused brain
cancer. In this study, most people had no increased risk of brain
cancer from using cell phones. For people with the heaviest use
of cell phones (an average of more than ½ hour per day, every
day, for over 10 years) the study suggested a slight increase in
brain cancer. However, the authors determined that biases and
errors prevented any conclusions being drawn from this data.
Additional information about Interphone can be found at
http://com.iarc.fr/en/media-centre/pr/.
Interphone is the largest cell phone study to date, but it did not
answer all questions about cell phone safety. Additional research
is being conducted around the world, and the FDA continues to
monitor developments in this field.
International Cohort Study on Mobile Phone Users (COSMOS)
The COSMOS study aims to conduct long-term health monitoring
of a large group of people to determine if there are any health
issues linked to long-term exposure to radio frequency energy
from cell phone use. The COSMOS study will follow
approximately 300,000 adult cell phone users in Europe for 20 to
30 years. Additional information about the COSMOS study can be
found at
http://www.ukcosmos.org/index.html
.
119
Risk of Brain Cancer from Exposure to Radio Frequency Fields
in Childhood and Adolescence (MOBI-KIDS)
MOBI-KIDS is an international study investigating the relationship
between exposure to radio frequency energy from
communication technologies including cell phones and brain
cancer in young people. This is an international multi-center
study involving 14 European and non-European countries.
Additional information about MOBI-KIDS can be found at
http://www.creal.cat/programes-recerca/en_projectes-creal/
view.php?ID=39.
.
Surveillance, Epidemiology, and End Results (SEER) Program
of the National Cancer Institute
The National Cancer Institute (NCI) actively follows cancer
statistics in the United States to detect any change in rates of
new cases for brain cancer. If cell phones play a role in risk for
brain cancer, rates should go up, because heavy cell phone use
has been common for quite some time in the U.S. Between 1987
and 2005, the overall age-adjusted incidence of brain cancer did
not increase. Additional information about SEER can be found at
http://seer.cancer.gov/
.
Cell Phone Industry Actions
Although the existing scientific data do not justify FDA regulatory
actions, the FDA has urged the cell phone industry to take a
number of steps, including the following:
•
Support-needed research on possible biological effects of RF for the
type of signal emitted by cell phones;
•
Design cell phones in a way that minimizes any RF exposure to the
user; and
•
Cooperate in providing users of cell phones with the current
information on cell phone use and human health concerns.
The FDA also is working with voluntary standard-setting bodies
such as the Institute of Electrical and Electronics Engineers
(IEEE), the International Commission on Non-Ionizing Radiation
Protection (ICNIRP), and others to assure that safety standards
continue to adequately protect the public.
Reducing Exposure: Hands-Free Kits and Other
Accessories
Steps to Reduce Exposure to Radio Frequency Energy
If there is a risk from being exposed to radio frequency energy
(RF) from cell phones - and at this point we do not know that
there is - it is probably very small. But, if you are concerned
about avoiding even potential risks, you can take a few simple
steps to minimize your RF exposure.
Health and Safety Information 120
•
Reduce the amount of time spent using your cell phone;
•
Use speaker mode or a headset to place more distance between your
head and the cell phone.
Hands-Free Kits
Hands-free kits may include audio or Bluetooth® headsets and
various types of body-worn accessories such as belt-clips and
holsters. Combinations of these can be used to reduce RF energy
absorption from cell phones.
Headsets can substantially reduce exposure because the phone
is held away from the head in the user's hand or in approved
body-worn accessories. Cell phones marketed in the U.S. are
required to meet RF exposure compliance requirements when
used against the head and against the body.
Because there are no known risks from exposure to RF emissions
from cell phones, there is no reason to believe that hands-free
kits reduce risks. Hands-free kits can be used for convenience
and comfort. They are also required by law in many states if you
want to use your phone while driving.
Cell Phone Accessories that Claim to Shield the Head from
RF Radiation
Because there are no known risks from exposure to RF emissions
from cell phones, there is no reason to believe that accessories
which claim to shield the head from those emissions reduce
risks. Some products that claim to shield the user from RF
absorption use special phone cases, while others involve nothing
more than a metallic accessory attached to the phone. Studies
have shown that these products generally do not work as
advertised. Unlike “hands-free” kits, these so-called “shields”
may interfere with proper operation of the phone. The phone may
be forced to boost its power to compensate, leading to an
increase in RF absorption.
Children and Cell Phones
The scientific evidence does not show a danger to any users of
cell phones from RF exposure, including children and teenagers.
The steps adults can take to reduce RF exposure apply to
children and teenagers as well.
•
Reduce the amount of time spent on the cell phone;
•
Use speaker mode or a headset to place more distance between the
head and the cell phone.
Some groups sponsored by other national governments have
advised that children be discouraged from using cell phones at
all. For example, The Stewart Report from the United Kingdom
made such a recommendation in December 2000. In this report,
a group of independent experts noted that no evidence exists that
using a cell phone causes brain tumors or other ill effects. Their
recommendation to limit cell phone use by children was strictly
121
precautionary; it was not based on scientific evidence that any
health hazard exists.
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations
(updated 10/1/2010):
•
FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/.
•
Environmental Protection Agency (EPA):
http://www.epa.gov/radtown/wireless-tech.html.
•
Occupational Safety and Health Administration (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/.
(Note: This web address is case sensitive.)
•
National Institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/.
•
World Health Organization (WHO):
http://www.who.int/peh-emf/en/.
•
International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de.
•
Health Protection Agency:
http://www.hpa.org.uk/Topics/Radiation/.
•
US Food and Drug Administration:
http://www.fda.gov/Radiation-EmittingProducts/
RadiationEmittingProductsandProcedures/
HomeBusinessandEntertainment/CellPhones/default.htm.
Specific Absorption Rate (SAR) Certification
Information
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the exposure limits for
Radio Frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. Government.
These FCC exposure limits are derived from the
recommendations of two expert organizations: the National
Council on Radiation Protection and Measurement (NCRP) and
the Institute of Electrical and Electronics Engineers (IEEE).
In both cases, the recommendations were developed by scientific
and engineering experts drawn from industry, government, and
academia after extensive reviews of the scientific literature
related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR is a measure of the rate of
absorption of RF energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires wireless phones to
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
The FCC exposure limit incorporates a substantial margin of
safety to give additional protection to the public and to account
for any variations in measurements.
Health and Safety Information 122
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC. Tests for each model
phone are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC.
For body-worn operation, this phone has been tested and meets
FCC RF exposure guidelines when used with an accessory that
contains no metal and that positions the mobile device a
minimum of 1.5 cm from the body.
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. The maximum SAR values
for this model phone as reported to the FCC are:
•
Head:
0.53 W/Kg.
•
Body-worn:
0.70 W/Kg.
SAR information on this and other model phones can be viewed
online at
http://www.fcc.gov/oet/ea
. To find information that
pertains to a particular model phone, this site uses the phone
FCC ID number which is usually printed somewhere on the case
of the phone.
Sometimes it may be necessary to remove the battery pack to
find the number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website and it
should provide values for typical or maximum SAR for a particular
phone. Additional product specific SAR information can also be
obtained at
www.fcc.gov/cgb/sar
.
Smart Practices While Driving
On the Road - Off the Phone
The primary responsibility of every driver is the safe operation of
his or her vehicle.
Responsible drivers understand that no secondary task should be
performed while driving whether it be eating, drinking, talking to
passengers, or talking on a mobile phone - unless the driver has
assessed the driving conditions and is confident that the
secondary task will not interfere with their primary responsibility.
Do not engage in any activity while driving a moving vehicle which
123
may cause you to take your eyes off the road or become so
absorbed in the activity that your ability to concentrate on the act
of driving becomes impaired
. Samsung is committed to promoting
responsible driving and giving drivers the tools they need to
understand and address distractions.
Check the laws and regulations on the use of mobile devices and
their accessories in the areas where you drive. Always obey them.
The use of these devices may be prohibited or restricted in certain
areas. For example, only hands-free use may be permitted in
certain areas.
Before answering calls, consider your circumstances. Let the call
go to voicemail when driving conditions require. Remember,
driving comes first, not the call!
If you consider a call necessary and appropriate, follow these
tips:
•
Use a hands-free device;
•
Secure your phone within easy reach;
•
Place calls when you are not moving;
•
Plan calls when your car will be stationary;
•
Do not engage in stressful or emotional conversations;
•
Let the person with whom you are speaking know that you are driving
and will suspend the call if necessary;
•
Do not take notes or look up phone numbers while driving;
Notice regarding legal restrictions on mounting this device in an
automobile:
Laws in some states may prohibit mounting this device on or
near the windshield of an automobile. In other states, the law
may permit mounting this device only in specific locations in the
automobile. Be sure to consult the state and local laws or
ordinances where you drive before mounting this device in an
automobile. Failure to comply with these restrictions could result
in fines, penalties, or other damages.
Never mount this device in a manner that will obstruct the
driver's clear view of the street and traffic.
Never use wireless data services such as text messaging, Web
browsing, or e-mail while operating a vehicle.
Never watch videos, such as a movie or clip, or play video games
while operating a vehicle.
For more information
, go to
http://www.ctia.org
.
Health and Safety Information 124
Battery Use and Safety
Important!: Handle and store batteries properly to avoid injury or damage
.
Most battery issues arise from improper handling of batteries
and, particularly, from the continued use of damaged batteries.
•
Do not disassemble, crush, puncture, shred, or otherwise attempt
to change the form of your battery
. Do not put a high degree of
pressure on the battery. This can cause leakage or an internal short-
circuit, resulting in overheating.
•
Do not let the phone or battery come in contact with liquids.
Liquids can get into the phone's circuits, leading to corrosion. Even
when the phone appears to be dry and appears to operate normally,
the circuitry could slowly corrode and pose a safety hazard. If the
phone and/or battery get wet, have them checked by your service
provider or contact Samsung, even if they appear to be working
properly.
•
Do not place your battery in or near a heat source
. Excessive
heating can damage the phone or the battery and could cause the
phone or the battery to explode. Do not dry a wet or damp battery with
an appliance or heat source such as a microwave oven, hair dryer,
iron, or radiator. Avoid leaving your phone in your car in high
temperatures.
•
Do not dispose of the phone or the battery in a fire
. The phone or
the battery may explode when overheated.
•
Do not handle a damaged or leaking battery
. Do not let leaking
battery fluid come in contact with your eyes, skin or clothing. For safe
disposal options, contact your nearest Samsung-authorized service
center.
•
Avoid dropping the cell phone
. Dropping the phone or the battery,
especially on a hard surface, can potentially cause damage to the
phone and battery. If you suspect damage to the phone or battery, take
it to a service center for inspection.
•
Never use any charger or battery that is damaged in any way
.
•
Do not allow the battery to touch metal objects
. Accidental
short-circuiting can occur when a metallic object (coin, key, jewelry,
clip, or pen) causes a direct connection between the + and - terminals
of the battery (metal strips on the battery), for example when you carry
a spare battery in a pocket or bag. Short-circuiting the terminals may
damage the battery or the object causing the short-circuiting.
Important!:
Use only Samsung-approved batteries, and recharge your
battery only with Samsung-approved chargers which are
specifically designed for your phone.
Warning!: Use of a non-Samsung-approved battery or charger may present a
risk of fire, explosion, leakage, or other hazard
. Samsung's
warranty does not cover damage to the phone caused by non-
Samsung-approved batteries and/or chargers.
125
•
Do not use incompatible cell phone batteries and chargers
. Some
websites and second-hand dealers not associated with reputable
manufacturers and carriers, might be selling incompatible or even
counterfeit batteries and chargers. Consumers should purchase
manufacturer or carrier-recommended products and accessories. If
unsure about whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
•
Misuse or use of incompatible phones, batteries, and charging
devices could result in damage to the equipment and a possible
risk of fire, explosion, or leakage, leading to serious injuries,
damages to your phone, or other serious hazard
.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its
customers to recycle Samsung mobile devices and genuine
Samsung accessories.
Proper disposal of your mobile device and its battery is not only
important for safety, it benefits the environment. Batteries must
be recycled or disposed of properly.
Recycling programs for your mobile device, batteries, and
accessories may not be available in your area.
We've made it easy for you to recycle your old Samsung mobile
device by working with respected take-back companies in every
state in the country.
Drop It Off
You can drop off your Samsung-branded mobile device and
batteries for recycling at one of our numerous Samsung
Recycling Direct (SM) locations. A list of these locations may be
found at:
http://pages.samsung.com/us/recyclingdirect/
usactivities_environment_samsungrecyclingdirect_locations.jsp
.
Samsung-branded devices and batteries will be accepted at
these locations for no fee.
Consumers may also recycle their used mobile device or
batteries at many retail or carrier-provided locations where
mobile devices and batteries are sold. Additional information
regarding specific locations may be found at:
http://www.epa.gov/epawaste/partnerships/plugin/cellphone/
index.htm
or at
http://www.call2recycle.org/
.
Mail It In
The Samsung Mobile Take-Back Program will provide Samsung
customers with a free recycling mailing label. Just go to
http://www.samsung.com/us/aboutsamsung/citizenship/
usactivities_environment_samsungrecyclingdirect.html?INT=STA_rec
yle_your_phone_page
and follow the instructions to print out a
free pre-paid postage label and then send your old mobile
device or battery to the address listed, via U.S. Mail, for
recycling.
Health and Safety Information 126
Dispose of unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect
Or call, (877) 278-0799.
Follow local regulations regarding disposal of mobile devices
and batteries
Dispose of your mobile device and batteries in accordance with
local regulations. In some areas, the disposal of these items in
household or business trash may be prohibited. Help us protect
the environment - recycle!
Warning!:
Never dispose of batteries in a fire because they may explode.
UL Certified Travel Charger
The Travel Charger for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions
per UL guidelines:
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY
LEAD TO SERIOUS PERSONAL INJURY AND POSSIBLE
PROPERTY DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH
AMERICA, USE AN ATTACHMENT PLUG ADAPTOR OF
THE PROPER CONFIGURATION FOR THE POWER
OUTLET.
THIS POWER UNIT IS INTENDED TO BE CORRECTLY
ORIENTED IN A VERTICAL OR HORIZONTAL OR FLOOR
MOUNT POSITION.
Display / Touch-Screen
Please note the following information when using your mobile
device:
WARNING REGARDING DISPLAY
The display on your mobile device is made of glass or
acrylic and could break if your mobile device is dropped or
if it receives significant impact. Do not use if screen is
broken or cracked as this could cause injury to you.
WARRANTY DISCLAIMER: PROPER USE OF A TOUCH-SCREEN
MOBILE DEVICE
If your mobile device has a touch-screen display, please
note that a touch-screen responds best to a light touch
from the pad of your finger or a non-metallic stylus. Using
excessive force or a metallic object when pressing on the
127
touch-screen may damage the tempered glass surface
and void the warranty. For more information, refer to
“Standard Limited Warranty” on page 136.
GPS & AGPS
Certain Samsung mobile devices can use a Global Positioning
System (GPS) signal for location-based applications. A GPS uses
satellites controlled by the U.S. Government that are subject to
changes implemented in accordance with the Department of
Defense policy and the 2008 Federal Radio navigation Plan (FRP).
Changes may affect the performance of location-based
technology on your mobile device.
Certain Samsung mobile devices can also use an Assisted Global
Positioning System (AGPS), which obtains information from the
cellular network to improve GPS performance. AGPS uses your
wireless service provider's network and therefore airtime, data
charges, and/or additional charges may apply in accordance with
your service plan. Contact your wireless service provider for
details.
Your Location
Location-based information includes information that can be
used to determine the approximate location of a mobile device.
Mobile devices which are connected to a wireless network
transmit location-based information. Additionally, if you use
applications that require location-based information (e.g. driving
directions), such applications transmit location-based
information. The location-based information may be shared with
third-parties, including your wireless service provider,
applications providers, Samsung, and other third-parties
providing services.
Use of AGPS in Emergency Calls
When you make an emergency call, the cellular network may
activate AGPS technology in your mobile device to tell the
emergency responders your approximate location.
AGPS has limitations and
might not work in your area
. Therefore:
•
Always tell the emergency responder your location to the best of your
ability; and
•
Remain on the mobile device for as long as the emergency responder
instructs you.
Navigation
Maps, directions, and other navigation data may contain
inaccurate or incomplete data, and circumstances can and do
change over time. In some areas, complete information may not
be available. Therefore,
you should always visually confirm that
the navigational instructions are consistent with what you see
before following them. All users should pay attention to road
conditions, closures, traffic, and all other factors that may impact
safe driving or walking. Always obey posted road signs
.
Health and Safety Information 128
Emergency Calls
This mobile device, like any wireless mobile device, operates
using radio signals, wireless and landline networks, as well as
user-programmed functions, which cannot guarantee connection
in all conditions, areas, or circumstances. Therefore, you should
never rely solely on any wireless mobile device for essential
communications (medical emergencies, for example). Before
traveling in remote or underdeveloped areas, plan an alternate
method of contacting emergency services personnel. Remember,
to make or receive any calls, the mobile device must be switched
on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless mobile
device networks or when certain network services and/or mobile
device features are in use. Check with local service providers.
To make an emergency call:
1. If the mobile device is not on, switch it on.
2. Key in the emergency number for your present location (for
example, 911 or other official emergency number).
Emergency numbers vary by location.
3. Press the “Send” key.
If certain features are in use (call blocking, for example), you may
first need to deactivate those features before you can make an
emergency call. Consult your User Manual and your local cellular
service provider. When making an emergency call, remember to
give all the necessary information as accurately as possible.
Remember that your mobile device may be the only means of
communication at the scene of an accident; do not cut off the call
until given permission to do so.
Care and Maintenance
Your mobile device is a product of superior design and
craftsmanship and should be treated with care. The suggestions
below will help you fulfill any warranty obligations and allow you
to enjoy this product for many years:
Keep your Samsung Mobile Device away from:
Liquids of any kind
Keep the mobile device dry. Precipitation, humidity, and liquids
contain minerals that will corrode electronic circuits. If the
mobile device does get wet, do not accelerate drying with the
use of an oven, microwave, or dryer, because this may damage
the mobile device and could cause a fire or explosion. Do not
use the mobile device with a wet hand. Doing so may cause an
electric shock to you or damage to the mobile device.
Extreme heat or cold
Avoid temperatures below 0°C / 32°F or above 45°C / 113°F.
129
Microwaves
Do not try to dry your mobile device in a microwave oven.
Doing so may cause a fire or explosion.
Dust and dirt
Do not expose your mobile device to dust, dirt, or sand.
Cleaning solutions
Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the mobile device. Wipe it with a soft cloth
slightly dampened in a mild soap-and-water solution.
Shock or vibration
Do not drop, knock, or shake the mobile device. Rough
handling can break internal circuit boards.
Paint
Do not paint the mobile device. Paint can clog the device’s
moving parts or ventilation openings and prevent proper
operation.
Responsible Listening
Caution!: Avoid potential hearing loss
.
Damage to hearing occurs when a person is exposed to loud
sounds over time. The risk of hearing loss increases as sound is
played louder and for longer durations. Prolonged exposure to
loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that
using portable audio devices, such as portable music players and
cell phones, at high volume settings for long durations may lead
to permanent noise-induced hearing loss. This includes the use
of headphones (including headsets, earbuds, and Bluetooth® or
other wireless devices). Exposure to very loud sound has also
been associated in some studies with tinnitus (a ringing in the
ear), hypersensitivity to sound, and distorted hearing. Individual
susceptibility to noise-induced hearing loss and potential hearing
problem varies. Additionally, the amount of sound produced by a
portable audio device varies depending on the nature of the
sound, the device settings, and the headphones that are used. As
a result, there is no single volume setting that is appropriate for
everyone or for every combination of sound, settings, and
equipment.
Health and Safety Information 130
You should follow some common sense recommendations when
using any portable audio device:
•
Always turn the volume down before plugging the earphones into an
audio source.
•
Set the volume in a quiet environment and select the lowest volume at
which you can hear adequately.
•
Be aware that you can adapt to higher volume settings over time, not
realizing that the higher volume may be harmful to your hearing.
•
When using headphones, turn the volume down if you cannot hear the
people speaking near you or if the person sitting next to you can hear
what you are listening to.
•
Do not turn the volume up to block out noisy surroundings. If you
choose to listen to your portable device in a noisy environment, use
noise-cancelling headphones to block out background environmental
noise. By blocking background environment noise, noise cancelling
headphones should allow you to hear the music at lower volumes than
when using earbuds.
•
Limit the amount of time you listen. As the volume increases, less time
is required before you hearing could be affected.
•
Avoid using headphones after exposure to extremely loud noises, such
as rock concerts, that might cause temporary hearing loss. Temporary
hearing loss might cause unsafe volumes to sound normal.
•
Do not listen at any volume that causes you discomfort. If you
experience ringing in your ears, hear muffled speech, or experience
any temporary hearing difficulty after listening to your portable audio
device, discontinue use and consult your doctor.
You can obtain additional information on this subject from the
following sources:
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Voice: (800) 222-2336
Email: info@audiology.org
Internet:
http://www.audiology.org/Pages/default.aspx
National Institute on Deafness and Other Communication Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
Email: nidcdinfo@nih.gov
Internet:
http://www.nidcd.nih.gov/
131
Operating Environment
Remember to follow any special regulations in force in any area,
and always switch your mobile device off whenever it is
forbidden to use it, or when it may cause interference or danger.
When connecting the mobile device or any accessory to another
device, read its user's guide for detailed safety instructions. Do
not connect incompatible products.
Using Your Mobile Device Near Other Electronic Devices
Most modern electronic equipment is shielded from Radio
Frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
mobile device. Consult the manufacturer to discuss alternatives.
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained
between a handheld wireless mobile device and an implantable
medical device, such as a pacemaker or implantable cardioverter
defibrillator, to avoid potential interference with the device.
Persons who have such devices:
•
Should ALWAYS keep the mobile device more than six (6) inches from
their implantable medical device when the mobile device is turned ON;
•
Should not carry the mobile device in a breast pocket;
•
Should use the ear opposite the implantable medical device to
minimize the potential for interference;
•
Should turn the mobile device OFF immediately if there is any reason
to suspect that interference is taking place;
•
Should read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
your wireless mobile device with an implantable medical device,
consult your health care provider.
National Institute for Occupational Safety and Health (NIOSH)
395 E Street, S.W.
Suite 9200
Patriots Plaza Building
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-4647)
1-800-CDC-INFO (1-800-232-4636)
Outside the U.S. 513-533-8328
Email: cdcinfo@cdc.gov
Internet:
http://www.cdc.gov/niosh/topics/noise/default.html
1-888-232-6348 TTY
Health and Safety Information 132
For more information see:
http://www.fcc.gov/oet/rfsafety/rf-
faqs.html#
.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information. Switch your mobile
device off in health care facilities when any regulations posted in
these areas instruct you to do so. Hospitals or health care
facilities may be using equipment that could be sensitive to
external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle before
using your mobile device in a motor vehicle. You should also
consult the manufacturer of any equipment that has been added
to your vehicle.
Posted Facilities
Switch your mobile device off in any facility where posted notices
require you to do so.
Potentially Explosive Environments
Switch your mobile device off when in any area with a potentially
explosive atmosphere and obey all signs and instructions. Sparks
in such areas could cause an explosion or fire resulting in bodily
injury or even death. Users are advised to switch the mobile
device off while at a refueling point (service station). Users are
reminded of the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution areas),
chemical plants, or where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often, but not
always, clearly marked. They include below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust, or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.
133
FCC Hearing Aid Compatibility (HAC)
Regulations for Wireless Devices
On July 10, 2003, the U.S. Federal Communications Commission
(FCC) Report and Order in WT Docket 01-309 modified the
exception of wireless mobile devices under the Hearing Aid
Compatibility Act of 1988 (HAC Act) to require digital wireless
mobile devices be compatible with hearing aids.
The intent of the HAC Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities. While some wireless mobile devices are used near
some hearing devices (hearing aids and cochlear implants),
users may detect a buzzing, humming, or whining noise. Some
hearing devices are more immune than others to this
interference noise, and mobile devices also vary in the amount of
interference they generate.
The wireless telephone industry has developed a rating system
for wireless mobile devices to assist hearing device users find
mobile devices that may be compatible with their hearing
devices. Not all mobile devices have been rated. Mobile devices
that are rated have the rating on their box or a label located on
the box.
The ratings are not guarantees. Results will vary depending on
the user's hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated mobile device successfully. Trying out the mobile
device with your hearing device is the best way to evaluate it for
your personal needs.
M-Ratings
: Mobile devices rated M3 or M4 meet FCC
requirements and are likely to generate less interference to
hearing devices than mobile devices that are not labeled. M4 is
the better/higher of the two ratings.
T-Ratings
: Mobile devices rated T3 or T4 meet FCC requirements
and are likely to generate less interference to hearing devices
than mobile devices that are not labeled. T4 is the better/higher
of the two ratings.
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help you find
this rating. Higher ratings mean that the hearing device is
relatively immune to interference noise. The hearing aid and
wireless mobile device rating values are then added together.
Health and Safety Information 134
A sum of 5 is considered acceptable for normal use. A sum of 6
is considered for best use.
In the above example, if a hearing aid meets the M2 level rating
and the wireless mobile device meets the M3 level rating, the
sum of the two values equal M5. This is synonymous for T
ratings. This should provide the hearing aid user with “normal
usage” while using their hearing aid with the particular wireless
mobile device.
“Normal usage” in this context is defined as a signal quality that
is acceptable for normal operation. The M mark is intended to be
synonymous with the U mark. The T mark is intended to be
synonymous with the UT mark. The M and T marks are
recommended by the Alliance for Telecommunications Industries
Solutions (ATIS). The U and UT marks are referenced in Section
20.19 of the FCC Rules.
The HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
Restricting Children's Access to Your
Mobile Device
Your mobile device is not a toy. Do not allow children to play with
it because they could hurt themselves and others, damage the
mobile device, or make calls that increase your mobile device
bill.
Keep the mobile device and all its parts and accessories out of
the reach of small children.
FCC Notice and Cautions
FCC Notice
The mobile device may cause TV or radio interference if used in
close proximity to receiving equipment. The FCC can require you
to stop using the mobile device if such interference cannot be
eliminated. Vehicles using liquefied petroleum gas (such as
propane or butane) must comply with the National Fire Protection
Standard (NFPA-58). For a copy of this standard, contact the
National Fire Protection Association.
M3 + M2 = 5 T3 + T2 = 5
135
Cautions
Any changes or modifications to your mobile device not expressly
approved in this document could void your warranty for this
equipment and void your authority to operate this equipment.
Only use approved batteries, antennas, and chargers. The use of
any unauthorized accessories may be dangerous and void the
mobile device warranty if said accessories cause damage or a
defect to the mobile device. Although your mobile device is quite
sturdy, it is a complex piece of equipment and can be broken.
Avoid dropping, hitting, bending, or sitting on it.
Other Important Safety Information
•
Only qualified personnel should service the mobile device or install the
mobile device in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty applicable to the device.
•
Ensure that any mobile devices or related equipment installed in your
vehicle are securely mounted.
•
Check regularly that all wireless mobile device equipment in your
vehicle is mounted and operating properly.
•
Do not store or carry flammable liquids, gases, or explosive materials
in the same compartment as the mobile device, its parts, or
accessories.
•
For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including installed or
portable wireless equipment near or in the area over the air bag or in
the air bag deployment area. If wireless equipment is improperly
installed and the air bag inflates, serious injury could result.
•
Switch your mobile device off before boarding an aircraft. The use of
wireless mobile devices in aircraft is illegal and may be dangerous to
the aircraft's operation. Check with appropriate authorities before
using any function of a mobile device while on an aircraft.
•
Failure to observe these instructions may lead to the suspension or
denial of cell phone services to the offender, or legal action, or both.
Warranty Information 136
Section 14: Warranty Information
Standard Limited Warranty
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")
warrants to the original purchaser ("Purchaser") that SAMSUNG's
phones and accessories ("Products") are free from defects in
material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for
the following specified period of time after that date:
What is Not Covered?
This Limited Warranty is conditioned upon proper
use of Product by Purchaser. This Limited Warranty does not cover: (a)
defects or damage resulting from accident, misuse, abnormal use,
abnormal conditions, improper storage, exposure to moisture or
dampness, neglect, unusual physical, electrical or electromechanical
stress, or defects in appearance, cosmetic, decorative or structural
items, including framing, and any non-operative parts unless caused by
SAMSUNG; (b) defects or damage resulting from excessive force when
pressing on a touch screen; (c) equipment that has the serial number or
the enhancement data code removed, defaced, damaged, altered or
made illegible; (d) any plastic surfaces or other externally exposed parts
that are scratched or damaged due to normal use; (e) malfunctions
resulting from the use of Product in conjunction or connection with
accessories, products, or ancillary/peripheral equipment not furnished or
approved by SAMSUNG; (f) defects or damage from improper testing,
operation, maintenance, installation, service, or adjustment not
furnished or approved by SAMSUNG; (g) defects or damage from
external causes such as collision with an object, or from fire, flooding,
sand, dirt, windstorm, lightning, earthquake, or from exposure to
weather conditions, or battery leakage, theft, blown fuse, or improper
use of any electrical source; (h) defects or damage caused by cellular
signal reception or transmission, or viruses or other software problems
introduced into the Product; (i) any other acts which are not the fault of
SAMSUNG; or (j) Product used or purchased outside the United States.
This Limited Warranty covers batteries only if battery capacity falls
below 80% of rated capacity or the battery leaks, and this Limited
Warranty does not cover any battery if (i) the battery has been charged
by a battery charger not specified or approved by SAMSUNG for charging
the battery, (ii) any of the seals on the battery are broken or show
Phone 1 Year
Batteries 1 Year
Leather Case 90 Days
Holster 90 Days
Other Phone Accessories 1 Year
137
evidence of tampering, or (iii) the battery has been used in equipment
other than the SAMSUNG phone for which it is specified.
What are SAMSUNG's Obligations?
During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG's sole
option, without charge to Purchaser, any defective component
part of Product. To obtain service under this Limited Warranty,
Purchaser must return Product to an authorized phone service
facility in an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof of sale
showing the original date of purchase, the serial number of
Product and the sellers' name and address. To obtain assistance
on where to deliver the Product, call Samsung Customer Care at
1-888-987-4357. Upon receipt, SAMSUNG will promptly repair
or replace the defective Product. SAMSUNG may, at SAMSUNG's
sole option, use rebuilt, reconditioned, or new parts or
components when repairing any Product or replace Product with
a rebuilt, reconditioned or new Product. Repaired/replaced cases,
pouches and holsters will be warranted for a period of ninety (90)
days. All other repaired/replaced Product will be warranted for a
period equal to the remainder of the original Limited Warranty on
the original Product or for 90 days, whichever is longer. All
replaced parts, components, boards and equipment shall
become the property of SAMSUNG. If SAMSUNG determines that
any Product is not covered by this Limited Warranty, Purchaser
must pay all parts, shipping, and labor charges for the repair or
return of such Product.
What Are The Limits On Samsung's Warranty/liability?
EXCEPT AS
SET FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN,
PURCHASER TAKES THE PRODUCT "AS IS," AND SAMSUNG MAKES NO
WARRANTY OR REPRESENTATION AND THERE ARE NO CONDITIONS,
EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO:
•
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
•
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
•
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
•
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
•
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION OF
LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
HEREBY LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS
Warranty Information 138
WRITTEN WARRANTY STATED HEREIN. SOME STATES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE
ABOVE LIMITATION MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG
SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR
LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF THE
EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF ANTICIPATED
PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM ANY TORT
(INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT
COMMITTED BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY
BREACH OF CONTRACT OR FOR ANY CLAIM BROUGHT AGAINST
PURCHASER BY ANY OTHER PARTY. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY
TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. THIS
LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S
EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS
HELD ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH
PARTIAL ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT THE
ENFORCEABILITY FOR THE REMAINDER OF THIS LIMITED WARRANTY
WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW
PERMITS.
THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE THIRD-
PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE
PRODUCT. SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS
AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRD-PARTY SOFTWARE OR
EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT
IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY SUCH
SOFTWARE OR EQUIPMENT WITH THE PRODUCT. THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE AND SUITABILITY OF ANY
SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE
PURCHASER AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG's Product pricing reflects this
allocation of risk and the limitations of liability contained in this Limited
Warranty. The agents, employees, distributors, and dealers of SAMSUNG
are not authorized to make modifications to this Limited Warranty, or
make additional warranties binding on SAMSUNG. Accordingly,
additional statements such as dealer advertising or presentation,
139
whether oral or written, do not constitute warranties by SAMSUNG and
should not be relied upon.
Samsung Telecommunications America, LLC
1301 E. Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2011 Samsung Telecommunications America, LLC. All rights reserved.
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change without
notice. [021710]
End User License Agreement for Software
IMPORTANT. READ CAREFULLY: This End User License Agreement
("EULA") is a legal agreement between you (either an individual
or a single entity) and Samsung Electronics Co., Ltd. for software
owned by Samsung Electronics Co., Ltd. and its affiliated
companies and its third party suppliers and licensors that
accompanies this EULA, which includes computer software and
may include associated media, printed materials, "online" or
electronic documentation ("Software"). BY CLICKING THE "I
ACCEPT" BUTTON (OR IF YOU BYPASS OR OTHERWISE DISABLE
THE "I ACCEPT", AND STILL INSTALL, COPY, DOWNLOAD,
ACCESS OR OTHERWISE USE THE SOFTWARE), YOU AGREE TO
BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT
ACCEPT THE TERMS IN THIS EULA, YOU MUST CLICK THE
"DECLINE" BUTTON, DISCONTINUE USE OF THE SOFTWARE.
1. GRANT OF LICENSE. Samsung grants you the following rights
provided that you comply with all terms and conditions of this
EULA: You may install, use, access, display and run one copy of
the Software on the local hard disk(s) or other permanent storage
media of one computer and use the Software on a single
computer or a mobile device at a time, and you may not make
the Software available over a network where it could be used by
multiple computers at the same time. You may make one copy of
the Software in machine-readable form for backup purposes
only; provided that the backup copy must include all copyright or
other proprietary notices contained on the original.
2. RESERVATION OF RIGHTS AND OWNERSHIP. Samsung reserves
all rights not expressly granted to you in this EULA. The Software
is protected by copyright and other intellectual property laws and
treaties. Samsung or its suppliers own the title, copyright and
other intellectual property rights in the Software. The Software is
licensed, not sold.
3. LIMITATIONS ON END USER RIGHTS. You may not reverse
engineer, decompile, disassemble, or otherwise attempt to
discover the source code or algorithms of, the Software (except
and only to the extent that such activity is expressly permitted by
Warranty Information 140
applicable law notwithstanding this limitation), or modify, or
disable any features of, the Software, or create derivative works
based on the Software. You may not rent, lease, lend, sublicense
or provide commercial hosting services with the Software.
4. CONSENT TO USE OF DATA. You agree that Samsung and its
affiliates may collect and use technical information gathered as
part of the product support services related to the Software
provided to you, if any, related to the Software. Samsung may
use this information solely to improve its products or to provide
customized services or technologies to you and will not disclose
this information in a form that personally identifies you.
5. UPGRADES. This EULA applies to updates, supplements and
add-on components (if any) of the Software that Samsung may
provide to you or make available to you after the date you obtain
your initial copy of the Software, unless we provide other terms
along with such upgrade. To use Software identified as an
upgrade, you must first be licensed for the Software identified by
Samsung as eligible for the upgrade. After upgrading, you may
no longer use the Software that formed the basis for your
upgrade eligibility.
6. SOFTWARE TRANSFER. You may not transfer this EULA or the
rights to the Software granted herein to any third party unless it
is in connection with the sale of the mobile device which the
Software accompanied. In such event, the transfer must include
all of the Software (including all component parts, the media and
printed materials, any upgrades, this EULA) and you may not
retain any copies of the Software. The transfer may not be an
indirect transfer, such as a consignment. Prior to the transfer, the
end user receiving the Software must agree to all the EULA
terms.
7. EXPORT RESTRICTIONS. You acknowledge that the Software is
subject to export restrictions of various countries. You agree to
comply with all applicable international and national laws that
apply to the Software, including the U.S. Export Administration
Regulations, as well as end user, end use, and destination
restrictions issued by U.S. and other governments.
8. TERMINATION. This EULA is effective until terminated. Your
rights under this License will terminate automatically without
notice from Samsung if you fail to comply with any of the terms
and conditions of this EULA. Upon termination of this EULA, you
shall cease all use of the Software and destroy all copies, full or
partial, of the Software.
9. DISCLAIMER OF WARRANTIES. You expressly acknowledge
and agree that use of the Software is at your sole risk and that
the entire risk as to satisfactory quality, performance, accuracy
and effort is with you. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, THE SOFTWARE IS PROVIDED "AS IS" AND
WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, AND
141
SAMSUNG AND ITS LICENSORS (COLLECTIVELY REFERRED TO AS
"SAMSUNG" FOR THE PURPOSES OF SECTIONS 9, 10 and 11)
HEREBY DISCLAIM ALL WARRANTIES AND CONDITIONS WITH
RESPECT TO THE SOFTWARE, EITHER EXPRESS, IMPLIED OR
STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY, OF
SATISFACTORY QUALITY OR WORKMANLIKE EFFORT, OF FITNESS
FOR A PARTICULAR PURPOSE, OF RELIABILITY OR AVAILABILITY,
OF ACCURACY, OF LACK OF VIRUSES, OF QUIET ENJOYMENT,
AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SAMSUNG
DOES NOT WARRANT AGAINST INTERFERENCE WITH YOUR
ENJOYMENT OF THE SOFTWARE, THAT THE FUNCTIONS
CONTAINED IN THE SOFTWARE WILL MEET YOUR
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL
BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE
SOFTWARE WILL BE CORRECTED. NO ORAL OR WRITTEN
INFORMATION OR ADVICE GIVEN BY SAMSUNG OR A SAMSUNG
AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY.
SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE
ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON
APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO THESE
EXCLUSIONS AND LIMITATIONS MAY NOT APPLY TO YOU.
10. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN
OTHER DAMAGES. TO THE EXTENT NOT PROHIBITED BY LAW, IN
NO EVENT SHALL SAMSUNG BE LIABLE FOR PERSONAL INJURY,
OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES WHATSOEVER, OR FOR LOSS OF PROFITS, LOSS OF
DATA, BUSINESS INTERRUPTION, OR FOR ANY PECUNIARY
DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO YOUR
USE OR INABILITY TO USE THE SOFTWARE, THE PROVISION OF
OR FAILURE TO PROVIDE SUPPORT OR OTHER SERVICES,
INFORMATION, SOFTWARE, AND RELATED CONTENT THROUGH
THE SOFTWARE OR OTHERWISE ARISING OUT OF THE USE OF
THE SOFTWARE, OR OTHERWISE UNDER OR IN CONNECTION
WITH ANY PROVISION OF THIS EULA, HOWEVER CAUSED,
REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT
OR OTHERWISE) AND EVEN IF SAMSUNG HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO
NOT ALLOW THE LIMITATION OF LIABILITY FOR PERSONAL
INJURY, OR OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THIS LIMITATION MAY NOT APPLY TO YOU.
11. LIMITATION OF LIABILITY. Notwithstanding any damages that
you might incur for any reason whatsoever (including, without
limitation, all damages referenced herein and all direct or general
damages in contract or anything else), the entire liability of
Samsung under any provision of this EULA and your exclusive
remedy hereunder shall be limited to the greater of the actual
Warranty Information 142
damages you incur in reasonable reliance on the Software up to
the amount actually paid by you for the Software or US$5.00. The
foregoing limitations, exclusions and disclaimers (including
Sections 9, 10 and 11) shall apply to the maximum extent
permitted by applicable law, even if any remedy fails its essential
purpose.
12. U.S. GOVERNMENT END USERS. The Software is licensed
only with "restricted rights" and as "commercial items"
consisting of "commercial software" and "commercial software
documentation" with only those rights as are granted to all other
end users pursuant to the terms and conditions herein.
13. APPLICABLE LAW. This EULA is governed by the laws of
TEXAS, without regard to conflicts of laws principles. This EULA
shall not be governed by the UN Convention on Contracts for the
International Sale of Goods, the application of which is expressly
excluded. If a dispute, controversy or difference is not amicably
settled, it shall be finally resolved by arbitration in Seoul, Korea in
accordance with the Arbitration Rules of the Korean Commercial
Arbitration Board. The award of arbitration shall be final and
binding upon the parties.
14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the entire
agreement between you and Samsung relating to the Software
and supersedes all prior or contemporaneous oral or written
communications, proposals and representations with respect to
the Software or any other subject matter covered by this EULA. If
any provision of this EULA is held to be void, invalid,
unenforceable or illegal, the other provisions shall continue in full
force and effect.
Precautions for Transfer and Disposal
If data stored on this device is deleted or reformatted using the
standard methods, the data only appears to be removed on a
superficial level, and it may be possible for someone to retrieve
and reuse the data by means of special software.
To avoid unintended information leaks and other problems of this
sort, it is recommended that the device be returned to Samsung’s
Customer Care Center for an Extended File System (EFS) Clear
which will eliminate all user memory and return all settings to
default settings. Please contact the
Samsung Customer Care
Center
for details.
Important!:
Please provide warranty information (proof of purchase) to
Samsung’s Customer Care Center in order to provide this service
at no charge. If the warranty has expired on the device, charges
may apply.
143
Customer Care Center:
1000 Klein Rd.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Samsung Telecommunications America, LLC:
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
Important!:
If you are using a handset other than a standard numeric keypad,
dial the numbers listed in brackets.
Phone: 1-888-987-HELP (4357)
©2011 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change
without notice.
144
Index
Numerics
2-Sec Pause 39
A
Activating Your Phone 8
Adding Contacts
Dial Method 38
Menu Method 38
Adjust
key beep 108
Ringer Setting 17
Alerts 107
B
Battery
Charging 7
Installing 5
Low Battery Indicator 8
Removing 6
Battery Use & Safety 124
C
Call Functions
Adjusting the Call Volume 26
Answering a Call 24
Call Log 26
Making a Call — Number Entry
Dialing 20
Making a Call — Speed Dialing 21
Making a Call — Voice Dialing 23
Call Settings 108
Auto Answer 109
Auto Retry 109
Call Alert 109
Call Answer 108
TTY Mode 109
Camera
My Images 78
Picture Options 72
Screen Icons 71
Camera Mode 19
Camera Options
Brightness 78
Quality 75
Resolution 74
Self Timer 74
Shot Type 73
White Balance 75
Zoom 78
Camera Settings
Auto Save 76
Icon Display 77
Reset Settings 77
Shutter Sound 77
Camera Shot Type 73
Care and Maintenance 128
Charging the Battery 7
Travel Adapter 7
Children and Cell Phones 120
Clock Format 104
Contacts
Adding 38
Adding Speed Dial Numbers 43
Contacts Groups 45
Deleting 47
Editing 39
Finding 35
Memory Info 48
Open Menu 34
Saving a Number After a Call 41
145
Contacts Groups
Add 47
Add Contacts 45
Erase 47
Rename 47
Create a Draft Message 60
Create and Send Text Messages 49
D
Dialing Font Size 105
Display / Touch-Screen 126
Display Setting
Dialing Font 105
Display Settings
Backlight 105
Clock Format 104
Dialing Font Size 105
Front Contrast 106
Theme 105
Wallpaper 104
Do cell phones pose a health
hazard? 117
E
Editing Contacts
Add Pauses 39
Assigning a Ringtone 41
Changing Speed Dial Numbers 44
Email Address 40
Name and Numbers 39
Names and Numbers 39
Emergency Calls 20, 128
Exposure to Radio Frequency (RF)
Signals 117
F
FCC Hearing Aid Compatibility (HAC)
Regulations for Wireless
Devices 133
FCC Notice and Cautions 134
Finding Contacts
Shortcut Key Method 35
Voice Method 36
Fun Tools
Color Tones 76
G
Games & Apps 66
Go back one menu 16
GPS & AGPS 127
H
Health and Safety Information 117
I
Installing the Battery 5
International Calls 20
In-Use Menu 25
L
Language Setting 111
M
Memo Pad
Add a Memo 94
Review, Edit, and Erase Memos 94
Menu, In-Use Options 25
Messages
Create a Draft Message 60
Create and Send 49
Message Boxes 58
Receive 51
Settings 64
Types 49
Mode
Call Answer 18
Camera 19
Handsfree 19
Lock 19
Standby 17
Text Input 19
146
My Images 78
N
Navigation Key Shortcuts 16
Number Entry Dialing 20
O
Operating Environment 131
Other Important Safety Information 135
P
Personal Organizer
Alarm Clock 95
Calculator 97
Calendar 92
Memo Pad 94
World Time 96
Phone
Command Keys 12
Display Screen 14
Display Screen Icons 14
Features 10
Modes 17
View, Open, Front 11
View,Closed 10
Phone Info 116
Phone Settings
Airplane Mode 110
Language 111
Security 111
Photos
Sending 79
Picture Messages
Online Viewing 57
Receiving 57
Send in Camera Mode 53
R
Receive Pic. Messages 57
Receive Text Messages 51
Reducing Exposure
Hands-Free Kits and Other
Accessories 119
Removing the Battery 6
Responsible Listening 129
Restricting Children's Access to Your
Mobile device 134
Return to Last Menu 16
Ringer Types, Assigning 107
Roaming 30
S
Samsung Mobile Products and
Recycling 125
Security Settings 111
Change Lock 111
Emergency # 112
Lock Phone 111
Resetting Your Phone 112
Restriction 113
Send Pic Messages 79
Send Text Messages 49
Set Time 114
Settings
Call Settings 108
Camera Options 73
Camera Settings 76
Display Settings 104
Phone Settings 110
Security Settings 111
Sound Settings 106
Setup
Location 103
Shortcut to menus 16
Smart Practices While Driving 122
Sound Settings
Alerts 107
Key Tone 108
Master Volume 106
147
Ringer Type 107
Specific Absorption Rate (SAR)
Certification Information 121
Speed Dialing 21
One-Touch Dialing 22
Three Touch Dialing 22
Two-Touch Dialing 22
Standard Limited Warranty 136
T
Taking Pictures 68
Text
Entering Emoticons 33
Entering Numbers 32
Entering Symbols 33
Using Abc Mode 32
Using T9® Mode 32
Time, Set 114
Tools
Tools Menu 84
Travel Adapter 7
TTY Mode 109
Turning Your Phone
Off 8
On 8
U
UL Certified Travel Charger 126
Understanding this User Manual 4
Use the Travel Adapter 7
V
Vibrate Mode 18
Voice Dialing 23
Voice SVC 87
About Voice SVC 91
Choice Lists 89
Digit Dialing 90
Sensitivity 89
Sound 91
Voice Commands 87
Voice Launch 91
Voicemail
Listen 9, 63
Setup 9
W
Wallpaper 104
Warranty Information 136
Y
Your Phone
Turning Off 8
Turning On 8
148

Navigation menu