Se2200a

Se2200A se2200a se2200a 422030 s studiospares 3:

2017-07-17

: Se2200A se2200a 422030 prd

Open the PDF directly: View PDF PDF.
Page Count: 1

sE2200a – Technical Information
The sE2200a studio condenser mic draws on and improves the incredible specications that won the
original sE2200 so many awards around the world.
Utilising the much acclaimed sE 1” gold vacuum plated diaphragm, the electronics are all new and
much improved oering low self generating noise and therefore a better signal to noise ratio.
The sE2200a has a low cut lter, 10dB pad and also comes complete with a very rugged aluminium
shock mount and ight case.
With improved chassis design and cosmetics, you can now have all the versatility of the original
sE2200 with improved performance for the same incredible price.
Technical Specications
Acoustical operating principle: Pressure gradient
transducer
Maximum SPL for THD 0.5%2): 130dB (cardioid)
Directional pattern: Cardioid Maximum SPL for THD 0.5% with
preattenuation2) :
140dB
Frequency range: 20 Hz ... 20 kHz Maximum output voltage: 900 mV
Sensitivity at 1 kHz into 1 kohm: 14mV/Pa1) Dynamic range of the microphone
amplier (A-weighted):
113dB
Rated impedance: 200 ohms Supply voltage (P48, IEC 61938) : 48 V ± 4 V
Rated load impedance: 1 kohms Current consumption (P48, IEC 61938): 4mA
Equivalent noise level, CCIR1) : 30dB Matching connectors: XLR3F
Equivalent noise level, A-weighted1): 17dB-A Weight: 515g
Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL):62dB Diameter: 51mm
Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL): 75dB Length: 196mm
125Hz
250Hz
500Hz
1KHz
2KHz
4KHz
8KHz
16KHz
1) According to IEC 60268-1; CCIR-weighting acccording to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS
2) Measured as equivalent el. input signal
Polar pattern and Frequency Chart
Cardioid
sE Electronics www.seelectronics.com

Navigation menu